diff options
author | Mark Lord <liml@rtr.ca> | 2009-01-30 23:51:54 (GMT) |
---|---|---|
committer | Jeff Garzik <jgarzik@redhat.com> | 2009-03-25 02:02:38 (GMT) |
commit | da14265e776f35067045b8555b5f5f7521e50bc4 (patch) | |
tree | c89dd1d0132b1e1443f8a6f60e99036d7a354aba /drivers | |
parent | 32cd11a61007511ddb38783deec8bb1aa6735789 (diff) | |
download | linux-da14265e776f35067045b8555b5f5f7521e50bc4.tar.xz |
sata_mv: introduce support for ATAPI devices
Add ATAPI support to sata_mv, using sff DMA for GEN_II chipsets,
and plain old PIO for GEN_IIE.
Signed-off-by: Mark Lord <mlord@pobox.com>
Signed-off-by: Jeff Garzik <jgarzik@redhat.com>
Diffstat (limited to 'drivers')
-rw-r--r-- | drivers/ata/sata_mv.c | 190 |
1 files changed, 186 insertions, 4 deletions
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 9c8ea2c..6f8a49b 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -31,8 +31,6 @@ * * --> Complete a full errata audit for all chipsets to identify others. * - * --> ATAPI support (Marvell claims the 60xx/70xx chips can do it). - * * --> Develop a low-power-consumption strategy, and implement it. * * --> [Experiment, low priority] Investigate interrupt coalescing. @@ -68,7 +66,7 @@ #include <linux/libata.h> #define DRV_NAME "sata_mv" -#define DRV_VERSION "1.25" +#define DRV_VERSION "1.26" enum { /* BAR's are enumerated in terms of pci_resource_start() terms */ @@ -126,7 +124,7 @@ enum { MV_GEN_II_FLAGS = MV_COMMON_FLAGS | MV_FLAG_IRQ_COALESCE | ATA_FLAG_PMP | ATA_FLAG_ACPI_SATA | - ATA_FLAG_NCQ | ATA_FLAG_NO_ATAPI, + ATA_FLAG_NCQ, MV_GEN_IIE_FLAGS = MV_GEN_II_FLAGS | ATA_FLAG_AN, @@ -348,6 +346,12 @@ enum { EDMA_HALTCOND_OFS = 0x60, /* GenIIe halt conditions */ + + BMDMA_CMD_OFS = 0x224, /* bmdma command register */ + BMDMA_STATUS_OFS = 0x228, /* bmdma status register */ + BMDMA_PRD_LOW_OFS = 0x22c, /* bmdma PRD addr 31:0 */ + BMDMA_PRD_HIGH_OFS = 0x230, /* bmdma PRD addr 63:32 */ + /* Host private flags (hp_flags) */ MV_HP_FLAG_MSI = (1 << 0), MV_HP_ERRATA_50XXB0 = (1 << 1), @@ -547,6 +551,15 @@ static void mv_pmp_error_handler(struct ata_port *ap); static void mv_process_crpb_entries(struct ata_port *ap, struct mv_port_priv *pp); +static unsigned long mv_mode_filter(struct ata_device *dev, + unsigned long xfer_mask); +static void mv_sff_irq_clear(struct ata_port *ap); +static int mv_check_atapi_dma(struct ata_queued_cmd *qc); +static void mv_bmdma_setup(struct ata_queued_cmd *qc); +static void mv_bmdma_start(struct ata_queued_cmd *qc); +static void mv_bmdma_stop(struct ata_queued_cmd *qc); +static u8 mv_bmdma_status(struct ata_port *ap); + /* .sg_tablesize is (MV_MAX_SG_CT / 2) in the structures below * because we have to allow room for worst case splitting of * PRDs for 64K boundaries in mv_fill_sg(). @@ -594,6 +607,14 @@ static struct ata_port_operations mv6_ops = { .pmp_softreset = mv_softreset, .softreset = mv_softreset, .error_handler = mv_pmp_error_handler, + + .sff_irq_clear = mv_sff_irq_clear, + .check_atapi_dma = mv_check_atapi_dma, + .bmdma_setup = mv_bmdma_setup, + .bmdma_start = mv_bmdma_start, + .bmdma_stop = mv_bmdma_stop, + .bmdma_status = mv_bmdma_status, + .mode_filter = mv_mode_filter, }; static struct ata_port_operations mv_iie_ops = { @@ -1393,6 +1414,167 @@ static void mv_crqb_pack_cmd(__le16 *cmdw, u8 data, u8 addr, unsigned last) } /** + * mv_mode_filter - Allow ATAPI DMA only on GenII chips. + * @dev: device whose xfer modes are being configured. + * + * Only the GenII hardware can use DMA with ATAPI drives. + */ +static unsigned long mv_mode_filter(struct ata_device *adev, + unsigned long xfer_mask) +{ + if (adev->class == ATA_DEV_ATAPI) { + struct mv_host_priv *hpriv = adev->link->ap->host->private_data; + if (!IS_GEN_II(hpriv)) { + xfer_mask &= ~(ATA_MASK_MWDMA | ATA_MASK_UDMA); + ata_dev_printk(adev, KERN_INFO, + "ATAPI DMA not supported on this chipset\n"); + } + } + return xfer_mask; +} + +/** + * mv_sff_irq_clear - Clear hardware interrupt after DMA. + * @ap: Port associated with this ATA transaction. + * + * We need this only for ATAPI bmdma transactions, + * as otherwise we experience spurious interrupts + * after libata-sff handles the bmdma interrupts. + */ +static void mv_sff_irq_clear(struct ata_port *ap) +{ + mv_clear_and_enable_port_irqs(ap, mv_ap_base(ap), ERR_IRQ); +} + +/** + * mv_check_atapi_dma - Filter ATAPI cmds which are unsuitable for DMA. + * @qc: queued command to check for chipset/DMA compatibility. + * + * The bmdma engines cannot handle speculative data sizes + * (bytecount under/over flow). So only allow DMA for + * data transfer commands with known data sizes. + * + * LOCKING: + * Inherited from caller. + */ +static int mv_check_atapi_dma(struct ata_queued_cmd *qc) +{ + struct scsi_cmnd *scmd = qc->scsicmd; + + if (scmd) { + switch (scmd->cmnd[0]) { + case READ_6: + case READ_10: + case READ_12: + case WRITE_6: + case WRITE_10: + case WRITE_12: + case GPCMD_READ_CD: + case GPCMD_SEND_DVD_STRUCTURE: + case GPCMD_SEND_CUE_SHEET: + return 0; /* DMA is safe */ + } + } + return -EOPNOTSUPP; /* use PIO instead */ +} + +/** + * mv_bmdma_setup - Set up BMDMA transaction + * @qc: queued command to prepare DMA for. + * + * LOCKING: + * Inherited from caller. + */ +static void mv_bmdma_setup(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + void __iomem *port_mmio = mv_ap_base(ap); + struct mv_port_priv *pp = ap->private_data; + + mv_fill_sg(qc); + + /* clear all DMA cmd bits */ + writel(0, port_mmio + BMDMA_CMD_OFS); + + /* load PRD table addr. */ + writel((pp->sg_tbl_dma[qc->tag] >> 16) >> 16, + port_mmio + BMDMA_PRD_HIGH_OFS); + writelfl(pp->sg_tbl_dma[qc->tag], + port_mmio + BMDMA_PRD_LOW_OFS); + + /* issue r/w command */ + ap->ops->sff_exec_command(ap, &qc->tf); +} + +/** + * mv_bmdma_start - Start a BMDMA transaction + * @qc: queued command to start DMA on. + * + * LOCKING: + * Inherited from caller. + */ +static void mv_bmdma_start(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + void __iomem *port_mmio = mv_ap_base(ap); + unsigned int rw = (qc->tf.flags & ATA_TFLAG_WRITE); + u32 cmd = (rw ? 0 : ATA_DMA_WR) | ATA_DMA_START; + + /* start host DMA transaction */ + writelfl(cmd, port_mmio + BMDMA_CMD_OFS); +} + +/** + * mv_bmdma_stop - Stop BMDMA transfer + * @qc: queued command to stop DMA on. + * + * Clears the ATA_DMA_START flag in the bmdma control register + * + * LOCKING: + * Inherited from caller. + */ +static void mv_bmdma_stop(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + void __iomem *port_mmio = mv_ap_base(ap); + u32 cmd; + + /* clear start/stop bit */ + cmd = readl(port_mmio + BMDMA_CMD_OFS); + cmd &= ~ATA_DMA_START; + writelfl(cmd, port_mmio + BMDMA_CMD_OFS); + + /* one-PIO-cycle guaranteed wait, per spec, for HDMA1:0 transition */ + ata_sff_dma_pause(ap); +} + +/** + * mv_bmdma_status - Read BMDMA status + * @ap: port for which to retrieve DMA status. + * + * Read and return equivalent of the sff BMDMA status register. + * + * LOCKING: + * Inherited from caller. + */ +static u8 mv_bmdma_status(struct ata_port *ap) +{ + void __iomem *port_mmio = mv_ap_base(ap); + u32 reg, status; + + /* + * Other bits are valid only if ATA_DMA_ACTIVE==0, + * and the ATA_DMA_INTR bit doesn't exist. + */ + reg = readl(port_mmio + BMDMA_STATUS_OFS); + if (reg & ATA_DMA_ACTIVE) + status = ATA_DMA_ACTIVE; + else + status = (reg & ATA_DMA_ERR) | ATA_DMA_INTR; + return status; +} + +/** * mv_qc_prep - Host specific command preparation. * @qc: queued command to prepare * |