Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

21 files changed, 958 insertions, 0 deletions

diff --git a/include/asm-i386/mach-default/apm.h b/include/asm-i386/mach-default/apm.h
new file mode 100644
index 0000000..1f730b8
--- /dev/null
+++ b/include/asm-i386/mach-default/apm.h
@@ -0,0 +1,75 @@
+/*
+ *  include/asm-i386/mach-default/apm.h
+ *
+ *  Machine specific APM BIOS functions for generic.
+ *  Split out from apm.c by Osamu Tomita <tomita@cinet.co.jp>
+ */
+
+#ifndef _ASM_APM_H
+#define _ASM_APM_H
+
+#ifdef APM_ZERO_SEGS
+#	define APM_DO_ZERO_SEGS \
+		"pushl %%ds\n\t" \
+		"pushl %%es\n\t" \
+		"xorl %%edx, %%edx\n\t" \
+		"mov %%dx, %%ds\n\t" \
+		"mov %%dx, %%es\n\t" \
+		"mov %%dx, %%fs\n\t" \
+		"mov %%dx, %%gs\n\t"
+#	define APM_DO_POP_SEGS \
+		"popl %%es\n\t" \
+		"popl %%ds\n\t"
+#else
+#	define APM_DO_ZERO_SEGS
+#	define APM_DO_POP_SEGS
+#endif
+
+static inline void apm_bios_call_asm(u32 func, u32 ebx_in, u32 ecx_in,
+					u32 *eax, u32 *ebx, u32 *ecx,
+					u32 *edx, u32 *esi)
+{
+	/*
+	 * N.B. We do NOT need a cld after the BIOS call
+	 * because we always save and restore the flags.
+	 */
+	__asm__ __volatile__(APM_DO_ZERO_SEGS
+		"pushl %%edi\n\t"
+		"pushl %%ebp\n\t"
+		"lcall *%%cs:apm_bios_entry\n\t"
+		"setc %%al\n\t"
+		"popl %%ebp\n\t"
+		"popl %%edi\n\t"
+		APM_DO_POP_SEGS
+		: "=a" (*eax), "=b" (*ebx), "=c" (*ecx), "=d" (*edx),
+		  "=S" (*esi)
+		: "a" (func), "b" (ebx_in), "c" (ecx_in)
+		: "memory", "cc");
+}
+
+static inline u8 apm_bios_call_simple_asm(u32 func, u32 ebx_in,
+						u32 ecx_in, u32 *eax)
+{
+	int	cx, dx, si;
+	u8	error;
+
+	/*
+	 * N.B. We do NOT need a cld after the BIOS call
+	 * because we always save and restore the flags.
+	 */
+	__asm__ __volatile__(APM_DO_ZERO_SEGS
+		"pushl %%edi\n\t"
+		"pushl %%ebp\n\t"
+		"lcall *%%cs:apm_bios_entry\n\t"
+		"setc %%bl\n\t"
+		"popl %%ebp\n\t"
+		"popl %%edi\n\t"
+		APM_DO_POP_SEGS
+		: "=a" (*eax), "=b" (error), "=c" (cx), "=d" (dx),
+		  "=S" (si)
+		: "a" (func), "b" (ebx_in), "c" (ecx_in)
+		: "memory", "cc");
+	return error;
+}
+
+#endif /* _ASM_APM_H */
diff --git a/include/asm-i386/mach-default/bios_ebda.h b/include/asm-i386/mach-default/bios_ebda.h
new file mode 100644
index 0000000..9cbd9a6
--- /dev/null
+++ b/include/asm-i386/mach-default/bios_ebda.h
@@ -0,0 +1,15 @@
+#ifndef _MACH_BIOS_EBDA_H
+#define _MACH_BIOS_EBDA_H
+
+/*
+ * there is a real-mode segmented pointer pointing to the
+ * 4K EBDA area at 0x40E.
+ */
+static inline unsigned int get_bios_ebda(void)
+{
+	unsigned int address = *(unsigned short *)phys_to_virt(0x40E);
+	address <<= 4;
+	return address;	/* 0 means none */
+}
+
+#endif /* _MACH_BIOS_EBDA_H */
diff --git a/include/asm-i386/mach-default/do_timer.h b/include/asm-i386/mach-default/do_timer.h
new file mode 100644
index 0000000..03dd13a
--- /dev/null
+++ b/include/asm-i386/mach-default/do_timer.h
@@ -0,0 +1,85 @@
+/* defines for inline arch setup functions */
+
+#include <asm/apic.h>
+
+/**
+ * do_timer_interrupt_hook - hook into timer tick
+ * @regs:	standard registers from interrupt
+ *
+ * Description:
+ *	This hook is called immediately after the timer interrupt is ack'd.
+ *	It's primary purpose is to allow architectures that don't possess
+ *	individual per CPU clocks (like the CPU APICs supply) to broadcast the
+ *	timer interrupt as a means of triggering reschedules etc.
+ **/
+
+static inline void do_timer_interrupt_hook(struct pt_regs *regs)
+{
+	do_timer(regs);
+#ifndef CONFIG_SMP
+	update_process_times(user_mode(regs));
+#endif
+/*
+ * In the SMP case we use the local APIC timer interrupt to do the
+ * profiling, except when we simulate SMP mode on a uniprocessor
+ * system, in that case we have to call the local interrupt handler.
+ */
+#ifndef CONFIG_X86_LOCAL_APIC
+	profile_tick(CPU_PROFILING, regs);
+#else
+	if (!using_apic_timer)
+		smp_local_timer_interrupt(regs);
+#endif
+}
+
+
+/* you can safely undefine this if you don't have the Neptune chipset */
+
+#define BUGGY_NEPTUN_TIMER
+
+/**
+ * do_timer_overflow - process a detected timer overflow condition
+ * @count:	hardware timer interrupt count on overflow
+ *
+ * Description:
+ *	This call is invoked when the jiffies count has not incremented but
+ *	the hardware timer interrupt has.  It means that a timer tick interrupt
+ *	came along while the previous one was pending, thus a tick was missed
+ **/
+static inline int do_timer_overflow(int count)
+{
+	int i;
+
+	spin_lock(&i8259A_lock);
+	/*
+	 * This is tricky when I/O APICs are used;
+	 * see do_timer_interrupt().
+	 */
+	i = inb(0x20);
+	spin_unlock(&i8259A_lock);
+	
+	/* assumption about timer being IRQ0 */
+	if (i & 0x01) {
+		/*
+		 * We cannot detect lost timer interrupts ... 
+		 * well, that's why we call them lost, don't we? :)
+		 * [hmm, on the Pentium and Alpha we can ... sort of]
+		 */
+		count -= LATCH;
+	} else {
+#ifdef BUGGY_NEPTUN_TIMER
+		/*
+		 * for the Neptun bug we know that the 'latch'
+		 * command doesn't latch the high and low value
+		 * of the counter atomically. Thus we have to 
+		 * substract 256 from the counter 
+		 * ... funny, isnt it? :)
+		 */
+		
+		count -= 256;
+#else
+		printk("do_slow_gettimeoffset(): hardware timer problem?\n");
+#endif
+	}
+	return count;
+}
diff --git a/include/asm-i386/mach-default/entry_arch.h b/include/asm-i386/mach-default/entry_arch.h
new file mode 100644
index 0000000..bc86146
--- /dev/null
+++ b/include/asm-i386/mach-default/entry_arch.h
@@ -0,0 +1,34 @@
+/*
+ * This file is designed to contain the BUILD_INTERRUPT specifications for
+ * all of the extra named interrupt vectors used by the architecture.
+ * Usually this is the Inter Process Interrupts (IPIs)
+ */
+
+/*
+ * The following vectors are part of the Linux architecture, there
+ * is no hardware IRQ pin equivalent for them, they are triggered
+ * through the ICC by us (IPIs)
+ */
+#ifdef CONFIG_X86_SMP
+BUILD_INTERRUPT(reschedule_interrupt,RESCHEDULE_VECTOR)
+BUILD_INTERRUPT(invalidate_interrupt,INVALIDATE_TLB_VECTOR)
+BUILD_INTERRUPT(call_function_interrupt,CALL_FUNCTION_VECTOR)
+#endif
+
+/*
+ * every pentium local APIC has two 'local interrupts', with a
+ * soft-definable vector attached to both interrupts, one of
+ * which is a timer interrupt, the other one is error counter
+ * overflow. Linux uses the local APIC timer interrupt to get
+ * a much simpler SMP time architecture:
+ */
+#ifdef CONFIG_X86_LOCAL_APIC
+BUILD_INTERRUPT(apic_timer_interrupt,LOCAL_TIMER_VECTOR)
+BUILD_INTERRUPT(error_interrupt,ERROR_APIC_VECTOR)
+BUILD_INTERRUPT(spurious_interrupt,SPURIOUS_APIC_VECTOR)
+
+#ifdef CONFIG_X86_MCE_P4THERMAL
+BUILD_INTERRUPT(thermal_interrupt,THERMAL_APIC_VECTOR)
+#endif
+
+#endif
diff --git a/include/asm-i386/mach-default/io_ports.h b/include/asm-i386/mach-default/io_ports.h
new file mode 100644
index 0000000..a96d9f6
--- /dev/null
+++ b/include/asm-i386/mach-default/io_ports.h
@@ -0,0 +1,30 @@
+/*
+ *  arch/i386/mach-generic/io_ports.h
+ *
+ *  Machine specific IO port address definition for generic.
+ *  Written by Osamu Tomita <tomita@cinet.co.jp>
+ */
+#ifndef _MACH_IO_PORTS_H
+#define _MACH_IO_PORTS_H
+
+/* i8253A PIT registers */
+#define PIT_MODE		0x43
+#define PIT_CH0			0x40
+#define PIT_CH2			0x42
+
+/* i8259A PIC registers */
+#define PIC_MASTER_CMD		0x20
+#define PIC_MASTER_IMR		0x21
+#define PIC_MASTER_ISR		PIC_MASTER_CMD
+#define PIC_MASTER_POLL		PIC_MASTER_ISR
+#define PIC_MASTER_OCW3		PIC_MASTER_ISR
+#define PIC_SLAVE_CMD		0xa0
+#define PIC_SLAVE_IMR		0xa1
+
+/* i8259A PIC related value */
+#define PIC_CASCADE_IR		2
+#define MASTER_ICW4_DEFAULT	0x01
+#define SLAVE_ICW4_DEFAULT	0x01
+#define PIC_ICW4_AEOI		2
+
+#endif /* !_MACH_IO_PORTS_H */
diff --git a/include/asm-i386/mach-default/irq_vectors.h b/include/asm-i386/mach-default/irq_vectors.h
new file mode 100644
index 0000000..881c63c
--- /dev/null
+++ b/include/asm-i386/mach-default/irq_vectors.h
@@ -0,0 +1,96 @@
+/*
+ * This file should contain #defines for all of the interrupt vector
+ * numbers used by this architecture.
+ *
+ * In addition, there are some standard defines:
+ *
+ *	FIRST_EXTERNAL_VECTOR:
+ *		The first free place for external interrupts
+ *
+ *	SYSCALL_VECTOR:
+ *		The IRQ vector a syscall makes the user to kernel transition
+ *		under.
+ *
+ *	TIMER_IRQ:
+ *		The IRQ number the timer interrupt comes in at.
+ *
+ *	NR_IRQS:
+ *		The total number of interrupt vectors (including all the
+ *		architecture specific interrupts) needed.
+ *
+ */			
+#ifndef _ASM_IRQ_VECTORS_H
+#define _ASM_IRQ_VECTORS_H
+
+/*
+ * IDT vectors usable for external interrupt sources start
+ * at 0x20:
+ */
+#define FIRST_EXTERNAL_VECTOR	0x20
+
+#define SYSCALL_VECTOR		0x80
+
+/*
+ * Vectors 0x20-0x2f are used for ISA interrupts.
+ */
+
+/*
+ * Special IRQ vectors used by the SMP architecture, 0xf0-0xff
+ *
+ *  some of the following vectors are 'rare', they are merged
+ *  into a single vector (CALL_FUNCTION_VECTOR) to save vector space.
+ *  TLB, reschedule and local APIC vectors are performance-critical.
+ *
+ *  Vectors 0xf0-0xfa are free (reserved for future Linux use).
+ */
+#define SPURIOUS_APIC_VECTOR	0xff
+#define ERROR_APIC_VECTOR	0xfe
+#define INVALIDATE_TLB_VECTOR	0xfd
+#define RESCHEDULE_VECTOR	0xfc
+#define CALL_FUNCTION_VECTOR	0xfb
+
+#define THERMAL_APIC_VECTOR	0xf0
+/*
+ * Local APIC timer IRQ vector is on a different priority level,
+ * to work around the 'lost local interrupt if more than 2 IRQ
+ * sources per level' errata.
+ */
+#define LOCAL_TIMER_VECTOR	0xef
+
+/*
+ * First APIC vector available to drivers: (vectors 0x30-0xee)
+ * we start at 0x31 to spread out vectors evenly between priority
+ * levels. (0x80 is the syscall vector)
+ */
+#define FIRST_DEVICE_VECTOR	0x31
+#define FIRST_SYSTEM_VECTOR	0xef
+
+#define TIMER_IRQ 0
+
+/*
+ * 16 8259A IRQ's, 208 potential APIC interrupt sources.
+ * Right now the APIC is mostly only used for SMP.
+ * 256 vectors is an architectural limit. (we can have
+ * more than 256 devices theoretically, but they will
+ * have to use shared interrupts)
+ * Since vectors 0x00-0x1f are used/reserved for the CPU,
+ * the usable vector space is 0x20-0xff (224 vectors)
+ */
+
+/*
+ * The maximum number of vectors supported by i386 processors
+ * is limited to 256. For processors other than i386, NR_VECTORS
+ * should be changed accordingly.
+ */
+#define NR_VECTORS 256
+
+#include "irq_vectors_limits.h"
+
+#define FPU_IRQ			13
+
+#define	FIRST_VM86_IRQ		3
+#define LAST_VM86_IRQ		15
+#define invalid_vm86_irq(irq)	((irq) < 3 || (irq) > 15)
+
+
+#endif /* _ASM_IRQ_VECTORS_H */
diff --git a/include/asm-i386/mach-default/irq_vectors_limits.h b/include/asm-i386/mach-default/irq_vectors_limits.h
new file mode 100644
index 0000000..b330026
--- /dev/null
+++ b/include/asm-i386/mach-default/irq_vectors_limits.h
@@ -0,0 +1,21 @@
+#ifndef _ASM_IRQ_VECTORS_LIMITS_H
+#define _ASM_IRQ_VECTORS_LIMITS_H
+
+#ifdef CONFIG_PCI_MSI
+#define NR_IRQS FIRST_SYSTEM_VECTOR
+#define NR_IRQ_VECTORS NR_IRQS
+#else
+#ifdef CONFIG_X86_IO_APIC
+#define NR_IRQS 224
+# if (224 >= 32 * NR_CPUS)
+# define NR_IRQ_VECTORS NR_IRQS
+# else
+# define NR_IRQ_VECTORS (32 * NR_CPUS)
+# endif
+#else
+#define NR_IRQS 16
+#define NR_IRQ_VECTORS NR_IRQS
+#endif
+#endif
+
+#endif /* _ASM_IRQ_VECTORS_LIMITS_H */
diff --git a/include/asm-i386/mach-default/mach_apic.h b/include/asm-i386/mach-default/mach_apic.h
new file mode 100644
index 0000000..627f1cd
--- /dev/null
+++ b/include/asm-i386/mach-default/mach_apic.h
@@ -0,0 +1,133 @@
+#ifndef __ASM_MACH_APIC_H
+#define __ASM_MACH_APIC_H
+
+#include <mach_apicdef.h>
+#include <asm/smp.h>
+
+#define APIC_DFR_VALUE	(APIC_DFR_FLAT)
+
+static inline cpumask_t target_cpus(void)
+{ 
+#ifdef CONFIG_SMP
+	return cpu_online_map;
+#else
+	return cpumask_of_cpu(0);
+#endif
+} 
+#define TARGET_CPUS (target_cpus())
+
+#define NO_BALANCE_IRQ (0)
+#define esr_disable (0)
+
+#define NO_IOAPIC_CHECK (0)
+
+#define INT_DELIVERY_MODE dest_LowestPrio
+#define INT_DEST_MODE 1     /* logical delivery broadcast to all procs */
+
+static inline unsigned long check_apicid_used(physid_mask_t bitmap, int apicid)
+{
+	return physid_isset(apicid, bitmap);
+}
+
+static inline unsigned long check_apicid_present(int bit)
+{
+	return physid_isset(bit, phys_cpu_present_map);
+}
+
+/*
+ * Set up the logical destination ID.
+ *
+ * Intel recommends to set DFR, LDR and TPR before enabling
+ * an APIC.  See e.g. "AP-388 82489DX User's Manual" (Intel
+ * document number 292116).  So here it goes...
+ */
+static inline void init_apic_ldr(void)
+{
+	unsigned long val;
+
+	apic_write_around(APIC_DFR, APIC_DFR_VALUE);
+	val = apic_read(APIC_LDR) & ~APIC_LDR_MASK;
+	val |= SET_APIC_LOGICAL_ID(1UL << smp_processor_id());
+	apic_write_around(APIC_LDR, val);
+}
+
+static inline physid_mask_t ioapic_phys_id_map(physid_mask_t phys_map)
+{
+	return phys_map;
+}
+
+static inline void clustered_apic_check(void)
+{
+	printk("Enabling APIC mode:  %s.  Using %d I/O APICs\n",
+					"Flat", nr_ioapics);
+}
+
+static inline int multi_timer_check(int apic, int irq)
+{
+	return 0;
+}
+
+static inline int apicid_to_node(int logical_apicid)
+{
+	return 0;
+}
+
+/* Mapping from cpu number to logical apicid */
+static inline int cpu_to_logical_apicid(int cpu)
+{
+	return 1 << cpu;
+}
+
+static inline int cpu_present_to_apicid(int mps_cpu)
+{
+	if (mps_cpu < get_physical_broadcast())
+		return  mps_cpu;
+	else
+		return BAD_APICID;
+}
+
+static inline physid_mask_t apicid_to_cpu_present(int phys_apicid)
+{
+	return physid_mask_of_physid(phys_apicid);
+}
+
+static inline int mpc_apic_id(struct mpc_config_processor *m, 
+			struct mpc_config_translation *translation_record)
+{
+	printk("Processor #%d %ld:%ld APIC version %d\n",
+			m->mpc_apicid,
+			(m->mpc_cpufeature & CPU_FAMILY_MASK) >> 8,
+			(m->mpc_cpufeature & CPU_MODEL_MASK) >> 4,
+			m->mpc_apicver);
+	return (m->mpc_apicid);
+}
+
+static inline void setup_portio_remap(void)
+{
+}
+
+static inline int check_phys_apicid_present(int boot_cpu_physical_apicid)
+{
+	return physid_isset(boot_cpu_physical_apicid, phys_cpu_present_map);
+}
+
+static inline int apic_id_registered(void)
+{
+	return physid_isset(GET_APIC_ID(apic_read(APIC_ID)), phys_cpu_present_map);
+}
+
+static inline unsigned int cpu_mask_to_apicid(cpumask_t cpumask)
+{
+	return cpus_addr(cpumask)[0];
+}
+
+static inline void enable_apic_mode(void)
+{
+}
+
+static inline u32 phys_pkg_id(u32 cpuid_apic, int index_msb)
+{
+	return cpuid_apic >> index_msb;
+}
+
+#endif /* __ASM_MACH_APIC_H */
diff --git a/include/asm-i386/mach-default/mach_apicdef.h b/include/asm-i386/mach-default/mach_apicdef.h
new file mode 100644
index 0000000..7bcb350
--- /dev/null
+++ b/include/asm-i386/mach-default/mach_apicdef.h
@@ -0,0 +1,13 @@
+#ifndef __ASM_MACH_APICDEF_H
+#define __ASM_MACH_APICDEF_H
+
+#define		APIC_ID_MASK		(0xF<<24)
+
+static inline unsigned get_apic_id(unsigned long x) 
+{ 
+	return (((x)>>24)&0xF);
+} 
+
+#define		GET_APIC_ID(x)	get_apic_id(x)
+
+#endif
diff --git a/include/asm-i386/mach-default/mach_ipi.h b/include/asm-i386/mach-default/mach_ipi.h
new file mode 100644
index 0000000..6f2b17a
--- /dev/null
+++ b/include/asm-i386/mach-default/mach_ipi.h
@@ -0,0 +1,30 @@
+#ifndef __ASM_MACH_IPI_H
+#define __ASM_MACH_IPI_H
+
+void send_IPI_mask_bitmask(cpumask_t mask, int vector);
+void __send_IPI_shortcut(unsigned int shortcut, int vector);
+
+static inline void send_IPI_mask(cpumask_t mask, int vector)
+{
+	send_IPI_mask_bitmask(mask, vector);
+}
+
+static inline void send_IPI_allbutself(int vector)
+{
+	/*
+	 * if there are no other CPUs in the system then we get an APIC send 
+	 * error if we try to broadcast, thus avoid sending IPIs in this case.
+	 */
+	if (!(num_online_cpus() > 1))
+		return;
+
+	__send_IPI_shortcut(APIC_DEST_ALLBUT, vector);
+	return;
+}
+
+static inline void send_IPI_all(int vector)
+{
+	__send_IPI_shortcut(APIC_DEST_ALLINC, vector);
+}
+
+#endif /* __ASM_MACH_IPI_H */
diff --git a/include/asm-i386/mach-default/mach_mpparse.h b/include/asm-i386/mach-default/mach_mpparse.h
new file mode 100644
index 0000000..1d38324
--- /dev/null
+++ b/include/asm-i386/mach-default/mach_mpparse.h
@@ -0,0 +1,28 @@
+#ifndef __ASM_MACH_MPPARSE_H
+#define __ASM_MACH_MPPARSE_H
+
+static inline void mpc_oem_bus_info(struct mpc_config_bus *m, char *name, 
+				struct mpc_config_translation *translation)
+{
+//	Dprintk("Bus #%d is %s\n", m->mpc_busid, name);
+}
+
+static inline void mpc_oem_pci_bus(struct mpc_config_bus *m, 
+				struct mpc_config_translation *translation)
+{
+}
+
+static inline int mps_oem_check(struct mp_config_table *mpc, char *oem, 
+		char *productid)
+{
+	return 0;
+}
+
+/* Hook from generic ACPI tables.c */
+static inline int acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+{
+	return 0;
+}
+
+
+#endif /* __ASM_MACH_MPPARSE_H */
diff --git a/include/asm-i386/mach-default/mach_mpspec.h b/include/asm-i386/mach-default/mach_mpspec.h
new file mode 100644
index 0000000..6b5dadc
--- /dev/null
+++ b/include/asm-i386/mach-default/mach_mpspec.h
@@ -0,0 +1,8 @@
+#ifndef __ASM_MACH_MPSPEC_H
+#define __ASM_MACH_MPSPEC_H
+
+#define MAX_IRQ_SOURCES 256
+
+#define MAX_MP_BUSSES 32
+
+#endif /* __ASM_MACH_MPSPEC_H */
diff --git a/include/asm-i386/mach-default/mach_reboot.h b/include/asm-i386/mach-default/mach_reboot.h
new file mode 100644
index 0000000..521e227
--- /dev/null
+++ b/include/asm-i386/mach-default/mach_reboot.h
@@ -0,0 +1,30 @@
+/*
+ *  arch/i386/mach-generic/mach_reboot.h
+ *
+ *  Machine specific reboot functions for generic.
+ *  Split out from reboot.c by Osamu Tomita <tomita@cinet.co.jp>
+ */
+#ifndef _MACH_REBOOT_H
+#define _MACH_REBOOT_H
+
+static inline void kb_wait(void)
+{
+	int i;
+
+	for (i = 0; i < 0x10000; i++)
+		if ((inb_p(0x64) & 0x02) == 0)
+			break;
+}
+
+static inline void mach_reboot(void)
+{
+	int i;
+	for (i = 0; i < 100; i++) {
+		kb_wait();
+		udelay(50);
+		outb(0xfe, 0x64);         /* pulse reset low */
+		udelay(50);
+	}
+}
+
+#endif /* !_MACH_REBOOT_H */
diff --git a/include/asm-i386/mach-default/mach_time.h b/include/asm-i386/mach-default/mach_time.h
new file mode 100644
index 0000000..b749aa4
--- /dev/null
+++ b/include/asm-i386/mach-default/mach_time.h
@@ -0,0 +1,122 @@
+/*
+ *  include/asm-i386/mach-default/mach_time.h
+ *
+ *  Machine specific set RTC function for generic.
+ *  Split out from time.c by Osamu Tomita <tomita@cinet.co.jp>
+ */
+#ifndef _MACH_TIME_H
+#define _MACH_TIME_H
+
+#include <linux/mc146818rtc.h>
+
+/* for check timing call set_rtc_mmss() 500ms     */
+/* used in arch/i386/time.c::do_timer_interrupt() */
+#define USEC_AFTER	500000
+#define USEC_BEFORE	500000
+
+/*
+ * In order to set the CMOS clock precisely, set_rtc_mmss has to be
+ * called 500 ms after the second nowtime has started, because when
+ * nowtime is written into the registers of the CMOS clock, it will
+ * jump to the next second precisely 500 ms later. Check the Motorola
+ * MC146818A or Dallas DS12887 data sheet for details.
+ *
+ * BUG: This routine does not handle hour overflow properly; it just
+ *      sets the minutes. Usually you'll only notice that after reboot!
+ */
+static inline int mach_set_rtc_mmss(unsigned long nowtime)
+{
+	int retval = 0;
+	int real_seconds, real_minutes, cmos_minutes;
+	unsigned char save_control, save_freq_select;
+
+	save_control = CMOS_READ(RTC_CONTROL); /* tell the clock it's being set */
+	CMOS_WRITE((save_control|RTC_SET), RTC_CONTROL);
+
+	save_freq_select = CMOS_READ(RTC_FREQ_SELECT); /* stop and reset prescaler */
+	CMOS_WRITE((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT);
+
+	cmos_minutes = CMOS_READ(RTC_MINUTES);
+	if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
+		BCD_TO_BIN(cmos_minutes);
+
+	/*
+	 * since we're only adjusting minutes and seconds,
+	 * don't interfere with hour overflow. This avoids
+	 * messing with unknown time zones but requires your
+	 * RTC not to be off by more than 15 minutes
+	 */
+	real_seconds = nowtime % 60;
+	real_minutes = nowtime / 60;
+	if (((abs(real_minutes - cmos_minutes) + 15)/30) & 1)
+		real_minutes += 30;		/* correct for half hour time zone */
+	real_minutes %= 60;
+
+	if (abs(real_minutes - cmos_minutes) < 30) {
+		if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) {
+			BIN_TO_BCD(real_seconds);
+			BIN_TO_BCD(real_minutes);
+		}
+		CMOS_WRITE(real_seconds,RTC_SECONDS);
+		CMOS_WRITE(real_minutes,RTC_MINUTES);
+	} else {
+		printk(KERN_WARNING
+		       "set_rtc_mmss: can't update from %d to %d\n",
+		       cmos_minutes, real_minutes);
+		retval = -1;
+	}
+
+	/* The following flags have to be released exactly in this order,
+	 * otherwise the DS12887 (popular MC146818A clone with integrated
+	 * battery and quartz) will not reset the oscillator and will not
+	 * update precisely 500 ms later. You won't find this mentioned in
+	 * the Dallas Semiconductor data sheets, but who believes data
+	 * sheets anyway ...                           -- Markus Kuhn
+	 */
+	CMOS_WRITE(save_control, RTC_CONTROL);
+	CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT);
+
+	return retval;
+}
+
+static inline unsigned long mach_get_cmos_time(void)
+{
+	unsigned int year, mon, day, hour, min, sec;
+	int i;
+
+	/* The Linux interpretation of the CMOS clock register contents:
+	 * When the Update-In-Progress (UIP) flag goes from 1 to 0, the
+	 * RTC registers show the second which has precisely just started.
+	 * Let's hope other operating systems interpret the RTC the same way.
+	 */
+	/* read RTC exactly on falling edge of update flag */
+	for (i = 0 ; i < 1000000 ; i++)	/* may take up to 1 second... */
+		if (CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP)
+			break;
+	for (i = 0 ; i < 1000000 ; i++)	/* must try at least 2.228 ms */
+		if (!(CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP))
+			break;
+	do { /* Isn't this overkill ? UIP above should guarantee consistency */
+		sec = CMOS_READ(RTC_SECONDS);
+		min = CMOS_READ(RTC_MINUTES);
+		hour = CMOS_READ(RTC_HOURS);
+		day = CMOS_READ(RTC_DAY_OF_MONTH);
+		mon = CMOS_READ(RTC_MONTH);
+		year = CMOS_READ(RTC_YEAR);
+	} while (sec != CMOS_READ(RTC_SECONDS));
+	if (!(CMOS_READ(RTC_CONTROL) & RTC_DM_BINARY) || RTC_ALWAYS_BCD)
+	  {
+	    BCD_TO_BIN(sec);
+	    BCD_TO_BIN(min);
+	    BCD_TO_BIN(hour);
+	    BCD_TO_BIN(day);
+	    BCD_TO_BIN(mon);
+	    BCD_TO_BIN(year);
+	  }
+	if ((year += 1900) < 1970)
+		year += 100;
+
+	return mktime(year, mon, day, hour, min, sec);
+}
+
+#endif /* !_MACH_TIME_H */
diff --git a/include/asm-i386/mach-default/mach_timer.h b/include/asm-i386/mach-default/mach_timer.h
new file mode 100644
index 0000000..4b9703b
--- /dev/null
+++ b/include/asm-i386/mach-default/mach_timer.h
@@ -0,0 +1,48 @@
+/*
+ *  include/asm-i386/mach-default/mach_timer.h
+ *
+ *  Machine specific calibrate_tsc() for generic.
+ *  Split out from timer_tsc.c by Osamu Tomita <tomita@cinet.co.jp>
+ */
+/* ------ Calibrate the TSC ------- 
+ * Return 2^32 * (1 / (TSC clocks per usec)) for do_fast_gettimeoffset().
+ * Too much 64-bit arithmetic here to do this cleanly in C, and for
+ * accuracy's sake we want to keep the overhead on the CTC speaker (channel 2)
+ * output busy loop as low as possible. We avoid reading the CTC registers
+ * directly because of the awkward 8-bit access mechanism of the 82C54
+ * device.
+ */
+#ifndef _MACH_TIMER_H
+#define _MACH_TIMER_H
+
+#define CALIBRATE_LATCH	(5 * LATCH)
+
+static inline void mach_prepare_counter(void)
+{
+       /* Set the Gate high, disable speaker */
+	outb((inb(0x61) & ~0x02) | 0x01, 0x61);
+
+	/*
+	 * Now let's take care of CTC channel 2
+	 *
+	 * Set the Gate high, program CTC channel 2 for mode 0,
+	 * (interrupt on terminal count mode), binary count,
+	 * load 5 * LATCH count, (LSB and MSB) to begin countdown.
+	 *
+	 * Some devices need a delay here.
+	 */
+	outb(0xb0, 0x43);			/* binary, mode 0, LSB/MSB, Ch 2 */
+	outb_p(CALIBRATE_LATCH & 0xff, 0x42);	/* LSB of count */
+	outb_p(CALIBRATE_LATCH >> 8, 0x42);       /* MSB of count */
+}
+
+static inline void mach_countup(unsigned long *count_p)
+{
+	unsigned long count = 0;
+	do {
+		count++;
+	} while ((inb_p(0x61) & 0x20) == 0);
+	*count_p = count;
+}
+
+#endif /* !_MACH_TIMER_H */
diff --git a/include/asm-i386/mach-default/mach_traps.h b/include/asm-i386/mach-default/mach_traps.h
new file mode 100644
index 0000000..625438b
--- /dev/null
+++ b/include/asm-i386/mach-default/mach_traps.h
@@ -0,0 +1,41 @@
+/*
+ *  include/asm-i386/mach-default/mach_traps.h
+ *
+ *  Machine specific NMI handling for generic.
+ *  Split out from traps.c by Osamu Tomita <tomita@cinet.co.jp>
+ */
+#ifndef _MACH_TRAPS_H
+#define _MACH_TRAPS_H
+
+#include <asm/mc146818rtc.h>
+
+static inline void clear_mem_error(unsigned char reason)
+{
+	reason = (reason & 0xf) | 4;
+	outb(reason, 0x61);
+}
+
+static inline unsigned char get_nmi_reason(void)
+{
+	return inb(0x61);
+}
+
+static inline void reassert_nmi(void)
+{
+	int old_reg = -1;
+
+	if (do_i_have_lock_cmos())
+		old_reg = current_lock_cmos_reg();
+	else
+		lock_cmos(0); /* register doesn't matter here */
+	outb(0x8f, 0x70);
+	inb(0x71);		/* dummy */
+	outb(0x0f, 0x70);
+	inb(0x71);		/* dummy */
+	if (old_reg >= 0)
+		outb(old_reg, 0x70);
+	else
+		unlock_cmos();
+}
+
+#endif /* !_MACH_TRAPS_H */
diff --git a/include/asm-i386/mach-default/mach_wakecpu.h b/include/asm-i386/mach-default/mach_wakecpu.h
new file mode 100644
index 0000000..673b85c
--- /dev/null
+++ b/include/asm-i386/mach-default/mach_wakecpu.h
@@ -0,0 +1,41 @@
+#ifndef __ASM_MACH_WAKECPU_H
+#define __ASM_MACH_WAKECPU_H
+
+/* 
+ * This file copes with machines that wakeup secondary CPUs by the
+ * INIT, INIT, STARTUP sequence.
+ */
+
+#define WAKE_SECONDARY_VIA_INIT
+
+#define TRAMPOLINE_LOW phys_to_virt(0x467)
+#define TRAMPOLINE_HIGH phys_to_virt(0x469)
+
+#define boot_cpu_apicid boot_cpu_physical_apicid
+
+static inline void wait_for_init_deassert(atomic_t *deassert)
+{
+	while (!atomic_read(deassert));
+	return;
+}
+
+/* Nothing to do for most platforms, since cleared by the INIT cycle */
+static inline void smp_callin_clear_local_apic(void)
+{
+}
+
+static inline void store_NMI_vector(unsigned short *high, unsigned short *low)
+{
+}
+
+static inline void restore_NMI_vector(unsigned short *high, unsigned short *low)
+{
+}
+
+#if APIC_DEBUG
+ #define inquire_remote_apic(apicid) __inquire_remote_apic(apicid)
+#else
+ #define inquire_remote_apic(apicid) {}
+#endif
+
+#endif /* __ASM_MACH_WAKECPU_H */
diff --git a/include/asm-i386/mach-default/pci-functions.h b/include/asm-i386/mach-default/pci-functions.h
new file mode 100644
index 0000000..ed0bab4
--- /dev/null
+++ b/include/asm-i386/mach-default/pci-functions.h
@@ -0,0 +1,19 @@
+/*
+ *	PCI BIOS function numbering for conventional PCI BIOS 
+ *	systems
+ */
+
+#define PCIBIOS_PCI_FUNCTION_ID 	0xb1XX
+#define PCIBIOS_PCI_BIOS_PRESENT 	0xb101
+#define PCIBIOS_FIND_PCI_DEVICE		0xb102
+#define PCIBIOS_FIND_PCI_CLASS_CODE	0xb103
+#define PCIBIOS_GENERATE_SPECIAL_CYCLE	0xb106
+#define PCIBIOS_READ_CONFIG_BYTE	0xb108
+#define PCIBIOS_READ_CONFIG_WORD	0xb109
+#define PCIBIOS_READ_CONFIG_DWORD	0xb10a
+#define PCIBIOS_WRITE_CONFIG_BYTE	0xb10b
+#define PCIBIOS_WRITE_CONFIG_WORD	0xb10c
+#define PCIBIOS_WRITE_CONFIG_DWORD	0xb10d
+#define PCIBIOS_GET_ROUTING_OPTIONS	0xb10e
+#define PCIBIOS_SET_PCI_HW_INT		0xb10f
+
diff --git a/include/asm-i386/mach-default/setup_arch_post.h b/include/asm-i386/mach-default/setup_arch_post.h
new file mode 100644
index 0000000..2fc4888
--- /dev/null
+++ b/include/asm-i386/mach-default/setup_arch_post.h
@@ -0,0 +1,40 @@
+/**
+ * machine_specific_memory_setup - Hook for machine specific memory setup.
+ *
+ * Description:
+ *	This is included late in kernel/setup.c so that it can make
+ *	use of all of the static functions.
+ **/
+
+static char * __init machine_specific_memory_setup(void)
+{
+	char *who;
+
+
+	who = "BIOS-e820";
+
+	/*
+	 * Try to copy the BIOS-supplied E820-map.
+	 *
+	 * Otherwise fake a memory map; one section from 0k->640k,
+	 * the next section from 1mb->appropriate_mem_k
+	 */
+	sanitize_e820_map(E820_MAP, &E820_MAP_NR);
+	if (copy_e820_map(E820_MAP, E820_MAP_NR) < 0) {
+		unsigned long mem_size;
+
+		/* compare results from other methods and take the greater */
+		if (ALT_MEM_K < EXT_MEM_K) {
+			mem_size = EXT_MEM_K;
+			who = "BIOS-88";
+		} else {
+			mem_size = ALT_MEM_K;
+			who = "BIOS-e801";
+		}
+
+		e820.nr_map = 0;
+		add_memory_region(0, LOWMEMSIZE(), E820_RAM);
+		add_memory_region(HIGH_MEMORY, mem_size << 10, E820_RAM);
+  	}
+	return who;
+}
diff --git a/include/asm-i386/mach-default/setup_arch_pre.h b/include/asm-i386/mach-default/setup_arch_pre.h
new file mode 100644
index 0000000..fb42099e
--- /dev/null
+++ b/include/asm-i386/mach-default/setup_arch_pre.h
@@ -0,0 +1,5 @@
+/* Hook to call BIOS initialisation function */
+
+/* no action for generic */
+
+#define ARCH_SETUP
diff --git a/include/asm-i386/mach-default/smpboot_hooks.h b/include/asm-i386/mach-default/smpboot_hooks.h
new file mode 100644
index 0000000..7f45f63
--- /dev/null
+++ b/include/asm-i386/mach-default/smpboot_hooks.h
@@ -0,0 +1,44 @@
+/* two abstractions specific to kernel/smpboot.c, mainly to cater to visws
+ * which needs to alter them. */
+
+static inline void smpboot_clear_io_apic_irqs(void)
+{
+	io_apic_irqs = 0;
+}
+
+static inline void smpboot_setup_warm_reset_vector(unsigned long start_eip)
+{
+	CMOS_WRITE(0xa, 0xf);
+	local_flush_tlb();
+	Dprintk("1.\n");
+	*((volatile unsigned short *) TRAMPOLINE_HIGH) = start_eip >> 4;
+	Dprintk("2.\n");
+	*((volatile unsigned short *) TRAMPOLINE_LOW) = start_eip & 0xf;
+	Dprintk("3.\n");
+}
+
+static inline void smpboot_restore_warm_reset_vector(void)
+{
+	/*
+	 * Install writable page 0 entry to set BIOS data area.
+	 */
+	local_flush_tlb();
+
+	/*
+	 * Paranoid:  Set warm reset code and vector here back
+	 * to default values.
+	 */
+	CMOS_WRITE(0, 0xf);
+
+	*((volatile long *) phys_to_virt(0x467)) = 0;
+}
+
+static inline void smpboot_setup_io_apic(void)
+{
+	/*
+	 * Here we can be sure that there is an IO-APIC in the system. Let's
+	 * go and set it up:
+	 */
+	if (!skip_ioapic_setup && nr_ioapics)
+		setup_IO_APIC();
+}