Merge branch 'drm-next-merged' of git://people.freedesktop.org/~airlied/linux into v4l_for_linus

* 'drm-next-merged' of git://people.freedesktop.org/~airlied/linux: (9717 commits)
  media-bus: Fixup RGB444_1X12, RGB565_1X16, and YUV8_1X24 media bus format
  hexdump: avoid warning in test function
  fs: take i_mutex during prepare_binprm for set[ug]id executables
  smp: Fix error case handling in smp_call_function_*()
  iommu-common: Fix PARISC compile-time warnings
  sparc: Make LDC use common iommu poll management functions
  sparc: Make sparc64 use scalable lib/iommu-common.c functions
  Break up monolithic iommu table/lock into finer graularity pools and lock
  sparc: Revert generic IOMMU allocator.
  tools/power turbostat: correct dumped pkg-cstate-limit value
  tools/power turbostat: calculate TSC frequency from CPUID(0x15) on SKL
  tools/power turbostat: correct DRAM RAPL units on recent Xeon processors
  tools/power turbostat: Initial Skylake support
  tools/power turbostat: Use $(CURDIR) instead of $(PWD) and add support for O= option in Makefile
  tools/power turbostat: modprobe msr, if needed
  tools/power turbostat: dump MSR_TURBO_RATIO_LIMIT2
  tools/power turbostat: use new MSR_TURBO_RATIO_LIMIT names
  Bluetooth: hidp: Fix regression with older userspace and flags validation
  config: Enable NEED_DMA_MAP_STATE by default when SWIOTLB is selected
  perf/x86/intel/pt: Fix and clean up error handling in pt_event_add()
  ...

That solves several merge conflicts:
	Documentation/DocBook/media/v4l/subdev-formats.xml
	Documentation/devicetree/bindings/vendor-prefixes.txt
	drivers/staging/media/mn88473/mn88473.c
	include/linux/kconfig.h
	include/uapi/linux/media-bus-format.h

The ones at subdev-formats.xml and media-bus-format.h are not trivial.
That's why we opted to merge from DRM.

12 files changed, 428 insertions, 16 deletions

diff --git a/include/dt-bindings/clock/pistachio-clk.h b/include/dt-bindings/clock/pistachio-clk.h
new file mode 100644
index 0000000..039f83f
--- /dev/null
+++ b/include/dt-bindings/clock/pistachio-clk.h
@@ -0,0 +1,183 @@
+/*
+ * Copyright (C) 2014 Google, Inc.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms and conditions of the GNU General Public License,
+ * version 2, as published by the Free Software Foundation.
+ */
+
+#ifndef _DT_BINDINGS_CLOCK_PISTACHIO_H
+#define _DT_BINDINGS_CLOCK_PISTACHIO_H
+
+/* PLLs */
+#define CLK_MIPS_PLL			0
+#define CLK_AUDIO_PLL			1
+#define CLK_RPU_V_PLL			2
+#define CLK_RPU_L_PLL			3
+#define CLK_SYS_PLL			4
+#define CLK_WIFI_PLL			5
+#define CLK_BT_PLL			6
+
+/* Fixed-factor clocks */
+#define CLK_WIFI_DIV4			16
+#define CLK_WIFI_DIV8			17
+
+/* Gate clocks */
+#define CLK_MIPS			32
+#define CLK_AUDIO_IN			33
+#define CLK_AUDIO			34
+#define CLK_I2S				35
+#define CLK_SPDIF			36
+#define CLK_AUDIO_DAC			37
+#define CLK_RPU_V			38
+#define CLK_RPU_L			39
+#define CLK_RPU_SLEEP			40
+#define CLK_WIFI_PLL_GATE		41
+#define CLK_RPU_CORE			42
+#define CLK_WIFI_ADC			43
+#define CLK_WIFI_DAC			44
+#define CLK_USB_PHY			45
+#define CLK_ENET_IN			46
+#define CLK_ENET			47
+#define CLK_UART0			48
+#define CLK_UART1			49
+#define CLK_PERIPH_SYS			50
+#define CLK_SPI0			51
+#define CLK_SPI1			52
+#define CLK_EVENT_TIMER			53
+#define CLK_AUX_ADC_INTERNAL		54
+#define CLK_AUX_ADC			55
+#define CLK_SD_HOST			56
+#define CLK_BT				57
+#define CLK_BT_DIV4			58
+#define CLK_BT_DIV8			59
+#define CLK_BT_1MHZ			60
+
+/* Divider clocks */
+#define CLK_MIPS_INTERNAL_DIV		64
+#define CLK_MIPS_DIV			65
+#define CLK_AUDIO_DIV			66
+#define CLK_I2S_DIV			67
+#define CLK_SPDIF_DIV			68
+#define CLK_AUDIO_DAC_DIV		69
+#define CLK_RPU_V_DIV			70
+#define CLK_RPU_L_DIV			71
+#define CLK_RPU_SLEEP_DIV		72
+#define CLK_RPU_CORE_DIV		73
+#define CLK_USB_PHY_DIV			74
+#define CLK_ENET_DIV			75
+#define CLK_UART0_INTERNAL_DIV		76
+#define CLK_UART0_DIV			77
+#define CLK_UART1_INTERNAL_DIV		78
+#define CLK_UART1_DIV			79
+#define CLK_SYS_INTERNAL_DIV		80
+#define CLK_SPI0_INTERNAL_DIV		81
+#define CLK_SPI0_DIV			82
+#define CLK_SPI1_INTERNAL_DIV		83
+#define CLK_SPI1_DIV			84
+#define CLK_EVENT_TIMER_INTERNAL_DIV	85
+#define CLK_EVENT_TIMER_DIV		86
+#define CLK_AUX_ADC_INTERNAL_DIV	87
+#define CLK_AUX_ADC_DIV			88
+#define CLK_SD_HOST_DIV			89
+#define CLK_BT_DIV			90
+#define CLK_BT_DIV4_DIV			91
+#define CLK_BT_DIV8_DIV			92
+#define CLK_BT_1MHZ_INTERNAL_DIV	93
+#define CLK_BT_1MHZ_DIV			94
+
+/* Mux clocks */
+#define CLK_AUDIO_REF_MUX		96
+#define CLK_MIPS_PLL_MUX		97
+#define CLK_AUDIO_PLL_MUX		98
+#define CLK_AUDIO_MUX			99
+#define CLK_RPU_V_PLL_MUX		100
+#define CLK_RPU_L_PLL_MUX		101
+#define CLK_RPU_L_MUX			102
+#define CLK_WIFI_PLL_MUX		103
+#define CLK_WIFI_DIV4_MUX		104
+#define CLK_WIFI_DIV8_MUX		105
+#define CLK_RPU_CORE_MUX		106
+#define CLK_SYS_PLL_MUX			107
+#define CLK_ENET_MUX			108
+#define CLK_EVENT_TIMER_MUX		109
+#define CLK_SD_HOST_MUX			110
+#define CLK_BT_PLL_MUX			111
+#define CLK_DEBUG_MUX			112
+
+#define CLK_NR_CLKS			113
+
+/* Peripheral gate clocks */
+#define PERIPH_CLK_SYS			0
+#define PERIPH_CLK_SYS_BUS		1
+#define PERIPH_CLK_DDR			2
+#define PERIPH_CLK_ROM			3
+#define PERIPH_CLK_COUNTER_FAST		4
+#define PERIPH_CLK_COUNTER_SLOW		5
+#define PERIPH_CLK_IR			6
+#define PERIPH_CLK_WD			7
+#define PERIPH_CLK_PDM			8
+#define PERIPH_CLK_PWM			9
+#define PERIPH_CLK_I2C0			10
+#define PERIPH_CLK_I2C1			11
+#define PERIPH_CLK_I2C2			12
+#define PERIPH_CLK_I2C3			13
+
+/* Peripheral divider clocks */
+#define PERIPH_CLK_ROM_DIV		32
+#define PERIPH_CLK_COUNTER_FAST_DIV	33
+#define PERIPH_CLK_COUNTER_SLOW_PRE_DIV	34
+#define PERIPH_CLK_COUNTER_SLOW_DIV	35
+#define PERIPH_CLK_IR_PRE_DIV		36
+#define PERIPH_CLK_IR_DIV		37
+#define PERIPH_CLK_WD_PRE_DIV		38
+#define PERIPH_CLK_WD_DIV		39
+#define PERIPH_CLK_PDM_PRE_DIV		40
+#define PERIPH_CLK_PDM_DIV		41
+#define PERIPH_CLK_PWM_PRE_DIV		42
+#define PERIPH_CLK_PWM_DIV		43
+#define PERIPH_CLK_I2C0_PRE_DIV		44
+#define PERIPH_CLK_I2C0_DIV		45
+#define PERIPH_CLK_I2C1_PRE_DIV		46
+#define PERIPH_CLK_I2C1_DIV		47
+#define PERIPH_CLK_I2C2_PRE_DIV		48
+#define PERIPH_CLK_I2C2_DIV		49
+#define PERIPH_CLK_I2C3_PRE_DIV		50
+#define PERIPH_CLK_I2C3_DIV		51
+
+#define PERIPH_CLK_NR_CLKS		52
+
+/* System gate clocks */
+#define SYS_CLK_I2C0			0
+#define SYS_CLK_I2C1			1
+#define SYS_CLK_I2C2			2
+#define SYS_CLK_I2C3			3
+#define SYS_CLK_I2S_IN			4
+#define SYS_CLK_PAUD_OUT		5
+#define SYS_CLK_SPDIF_OUT		6
+#define SYS_CLK_SPI0_MASTER		7
+#define SYS_CLK_SPI0_SLAVE		8
+#define SYS_CLK_PWM			9
+#define SYS_CLK_UART0			10
+#define SYS_CLK_UART1			11
+#define SYS_CLK_SPI1			12
+#define SYS_CLK_MDC			13
+#define SYS_CLK_SD_HOST			14
+#define SYS_CLK_ENET			15
+#define SYS_CLK_IR			16
+#define SYS_CLK_WD			17
+#define SYS_CLK_TIMER			18
+#define SYS_CLK_I2S_OUT			24
+#define SYS_CLK_SPDIF_IN		25
+#define SYS_CLK_EVENT_TIMER		26
+#define SYS_CLK_HASH			27
+
+#define SYS_CLK_NR_CLKS			28
+
+/* Gates for external input clocks */
+#define EXT_CLK_AUDIO_IN		0
+#define EXT_CLK_ENET_IN			1
+
+#define EXT_CLK_NR_CLKS			2
+
+#endif /* _DT_BINDINGS_CLOCK_PISTACHIO_H */
diff --git a/include/dt-bindings/gpio/meson8b-gpio.h b/include/dt-bindings/gpio/meson8b-gpio.h
new file mode 100644
index 0000000..c38cb20
--- /dev/null
+++ b/include/dt-bindings/gpio/meson8b-gpio.h
@@ -0,0 +1,32 @@
+/*
+ * GPIO definitions for Amlogic Meson8b SoCs
+ *
+ * Copyright (C) 2015 Endless Mobile, Inc.
+ * Author: Carlo Caione <carlo@endlessm.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <http://www.gnu.org/licenses/>.
+ */
+
+#ifndef _DT_BINDINGS_MESON8B_GPIO_H
+#define _DT_BINDINGS_MESON8B_GPIO_H
+
+#include <dt-bindings/gpio/meson8-gpio.h>
+
+/* GPIO Bank DIF */
+#define DIF_0_P		120
+#define DIF_0_N		121
+#define DIF_1_P		122
+#define DIF_1_N		123
+#define DIF_2_P		124
+#define DIF_2_N		125
+#define DIF_3_P		126
+#define DIF_3_N		127
+#define DIF_4_P		128
+#define DIF_4_N		129
+
+#endif /* _DT_BINDINGS_MESON8B_GPIO_H */
diff --git a/include/dt-bindings/interrupt-controller/irq-st.h b/include/dt-bindings/interrupt-controller/irq-st.h
new file mode 100644
index 0000000..4c59ace
--- /dev/null
+++ b/include/dt-bindings/interrupt-controller/irq-st.h
@@ -0,0 +1,30 @@
+/*
+ *  include/linux/irqchip/irq-st.h
+ *
+ *  Copyright (C) 2014 STMicroelectronics – All Rights Reserved
+ *
+ *  Author: Lee Jones <lee.jones@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _DT_BINDINGS_INTERRUPT_CONTROLLER_ST_H
+#define _DT_BINDINGS_INTERRUPT_CONTROLLER_ST_H
+
+#define ST_IRQ_SYSCFG_EXT_0		0
+#define ST_IRQ_SYSCFG_EXT_1		1
+#define ST_IRQ_SYSCFG_EXT_2		2
+#define ST_IRQ_SYSCFG_CTI_0		3
+#define ST_IRQ_SYSCFG_CTI_1		4
+#define ST_IRQ_SYSCFG_PMU_0		5
+#define ST_IRQ_SYSCFG_PMU_1		6
+#define ST_IRQ_SYSCFG_pl310_L2		7
+#define ST_IRQ_SYSCFG_DISABLED		0xFFFFFFFF
+
+#define ST_IRQ_SYSCFG_EXT_1_INV		0x1
+#define ST_IRQ_SYSCFG_EXT_2_INV		0x2
+#define ST_IRQ_SYSCFG_EXT_3_INV		0x4
+
+#endif
diff --git a/include/dt-bindings/leds/common.h b/include/dt-bindings/leds/common.h
new file mode 100644
index 0000000..79fcef7
--- /dev/null
+++ b/include/dt-bindings/leds/common.h
@@ -0,0 +1,21 @@
+/*
+ * This header provides macros for the common LEDs device tree bindings.
+ *
+ * Copyright (C) 2015, Samsung Electronics Co., Ltd.
+ *
+ * Author: Jacek Anaszewski <j.anaszewski@samsung.com>
+ */
+
+#ifndef __DT_BINDINGS_LEDS_H__
+#define __DT_BINDINGS_LEDS_H
+
+/* External trigger type */
+#define LEDS_TRIG_TYPE_EDGE	0
+#define LEDS_TRIG_TYPE_LEVEL	1
+
+/* Boost modes */
+#define LEDS_BOOST_OFF		0
+#define LEDS_BOOST_ADAPTIVE	1
+#define LEDS_BOOST_FIXED	2
+
+#endif /* __DT_BINDINGS_LEDS_H */
diff --git a/include/dt-bindings/mfd/arizona.h b/include/dt-bindings/mfd/arizona.h
new file mode 100644
index 0000000..c7af7c7
--- /dev/null
+++ b/include/dt-bindings/mfd/arizona.h
@@ -0,0 +1,93 @@
+/*
+ * Device Tree defines for Arizona devices
+ *
+ * Copyright 2015 Cirrus Logic Inc.
+ *
+ * Author: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#ifndef _DT_BINDINGS_MFD_ARIZONA_H
+#define _DT_BINDINGS_MFD_ARIZONA_H
+
+/* GPIO Function Definitions */
+#define ARIZONA_GP_FN_TXLRCLK                    0x00
+#define ARIZONA_GP_FN_GPIO                       0x01
+#define ARIZONA_GP_FN_IRQ1                       0x02
+#define ARIZONA_GP_FN_IRQ2                       0x03
+#define ARIZONA_GP_FN_OPCLK                      0x04
+#define ARIZONA_GP_FN_FLL1_OUT                   0x05
+#define ARIZONA_GP_FN_FLL2_OUT                   0x06
+#define ARIZONA_GP_FN_PWM1                       0x08
+#define ARIZONA_GP_FN_PWM2                       0x09
+#define ARIZONA_GP_FN_SYSCLK_UNDERCLOCKED        0x0A
+#define ARIZONA_GP_FN_ASYNCCLK_UNDERCLOCKED      0x0B
+#define ARIZONA_GP_FN_FLL1_LOCK                  0x0C
+#define ARIZONA_GP_FN_FLL2_LOCK                  0x0D
+#define ARIZONA_GP_FN_FLL1_CLOCK_OK              0x0F
+#define ARIZONA_GP_FN_FLL2_CLOCK_OK              0x10
+#define ARIZONA_GP_FN_HEADPHONE_DET              0x12
+#define ARIZONA_GP_FN_MIC_DET                    0x13
+#define ARIZONA_GP_FN_WSEQ_STATUS                0x15
+#define ARIZONA_GP_FN_CIF_ADDRESS_ERROR          0x16
+#define ARIZONA_GP_FN_ASRC1_LOCK                 0x1A
+#define ARIZONA_GP_FN_ASRC2_LOCK                 0x1B
+#define ARIZONA_GP_FN_ASRC_CONFIG_ERROR          0x1C
+#define ARIZONA_GP_FN_DRC1_SIGNAL_DETECT         0x1D
+#define ARIZONA_GP_FN_DRC1_ANTICLIP              0x1E
+#define ARIZONA_GP_FN_DRC1_DECAY                 0x1F
+#define ARIZONA_GP_FN_DRC1_NOISE                 0x20
+#define ARIZONA_GP_FN_DRC1_QUICK_RELEASE         0x21
+#define ARIZONA_GP_FN_DRC2_SIGNAL_DETECT         0x22
+#define ARIZONA_GP_FN_DRC2_ANTICLIP              0x23
+#define ARIZONA_GP_FN_DRC2_DECAY                 0x24
+#define ARIZONA_GP_FN_DRC2_NOISE                 0x25
+#define ARIZONA_GP_FN_DRC2_QUICK_RELEASE         0x26
+#define ARIZONA_GP_FN_MIXER_DROPPED_SAMPLE       0x27
+#define ARIZONA_GP_FN_AIF1_CONFIG_ERROR          0x28
+#define ARIZONA_GP_FN_AIF2_CONFIG_ERROR          0x29
+#define ARIZONA_GP_FN_AIF3_CONFIG_ERROR          0x2A
+#define ARIZONA_GP_FN_SPK_TEMP_SHUTDOWN          0x2B
+#define ARIZONA_GP_FN_SPK_TEMP_WARNING           0x2C
+#define ARIZONA_GP_FN_UNDERCLOCKED               0x2D
+#define ARIZONA_GP_FN_OVERCLOCKED                0x2E
+#define ARIZONA_GP_FN_DSP_IRQ1                   0x35
+#define ARIZONA_GP_FN_DSP_IRQ2                   0x36
+#define ARIZONA_GP_FN_ASYNC_OPCLK                0x3D
+#define ARIZONA_GP_FN_BOOT_DONE                  0x44
+#define ARIZONA_GP_FN_DSP1_RAM_READY             0x45
+#define ARIZONA_GP_FN_SYSCLK_ENA_STATUS          0x4B
+#define ARIZONA_GP_FN_ASYNCCLK_ENA_STATUS        0x4C
+
+/* GPIO Configuration Bits */
+#define ARIZONA_GPN_DIR                          0x8000
+#define ARIZONA_GPN_PU                           0x4000
+#define ARIZONA_GPN_PD                           0x2000
+#define ARIZONA_GPN_LVL                          0x0800
+#define ARIZONA_GPN_POL                          0x0400
+#define ARIZONA_GPN_OP_CFG                       0x0200
+#define ARIZONA_GPN_DB                           0x0100
+
+/* Provide some defines for the most common configs */
+#define ARIZONA_GP_DEFAULT             0xffffffff
+#define ARIZONA_GP_OUTPUT              (ARIZONA_GP_FN_GPIO)
+#define ARIZONA_GP_INPUT               (ARIZONA_GP_FN_GPIO | \
+					ARIZONA_GPN_DIR)
+
+#define ARIZONA_32KZ_MCLK1 1
+#define ARIZONA_32KZ_MCLK2 2
+#define ARIZONA_32KZ_NONE  3
+
+#define ARIZONA_DMIC_MICVDD   0
+#define ARIZONA_DMIC_MICBIAS1 1
+#define ARIZONA_DMIC_MICBIAS2 2
+#define ARIZONA_DMIC_MICBIAS3 3
+
+#define ARIZONA_INMODE_DIFF 0
+#define ARIZONA_INMODE_SE   1
+#define ARIZONA_INMODE_DMIC 2
+
+#endif
diff --git a/include/dt-bindings/mfd/qcom-rpm.h b/include/dt-bindings/mfd/qcom-rpm.h
index 388a6f3..13a9d4b 100644
--- a/include/dt-bindings/mfd/qcom-rpm.h
+++ b/include/dt-bindings/mfd/qcom-rpm.h
@@ -141,6 +141,12 @@
 #define QCOM_RPM_SYS_FABRIC_MODE		131
 #define QCOM_RPM_USB_OTG_SWITCH			132
 #define QCOM_RPM_VDDMIN_GPIO			133
+#define QCOM_RPM_NSS_FABRIC_0_CLK		134
+#define QCOM_RPM_NSS_FABRIC_1_CLK		135
+#define QCOM_RPM_SMB208_S1a			136
+#define QCOM_RPM_SMB208_S1b			137
+#define QCOM_RPM_SMB208_S2a			138
+#define QCOM_RPM_SMB208_S2b			139
 
 /*
  * Constants used to select force mode for regulators.
diff --git a/include/dt-bindings/phy/phy-miphy365x.h b/include/dt-bindings/phy/phy-miphy365x.h
deleted file mode 100644
index 8ef8aba..0000000
--- a/include/dt-bindings/phy/phy-miphy365x.h
+++ /dev/null
@@ -1,14 +0,0 @@
-/*
- * This header provides constants for the phy framework
- * based on the STMicroelectronics MiPHY365x.
- *
- * Author: Lee Jones <lee.jones@linaro.org>
- */
-#ifndef _DT_BINDINGS_PHY_MIPHY
-#define _DT_BINDINGS_PHY_MIPHY
-
-#define MIPHY_TYPE_SATA		1
-#define MIPHY_TYPE_PCIE		2
-#define MIPHY_TYPE_USB		3
-
-#endif /* _DT_BINDINGS_PHY_MIPHY */
diff --git a/include/dt-bindings/pinctrl/am33xx.h b/include/dt-bindings/pinctrl/am33xx.h
index 2fbc804..226f772 100644
--- a/include/dt-bindings/pinctrl/am33xx.h
+++ b/include/dt-bindings/pinctrl/am33xx.h
@@ -13,7 +13,8 @@
 
 #define PULL_DISABLE		(1 << 3)
 #define INPUT_EN		(1 << 5)
-#define SLEWCTRL_FAST		(1 << 6)
+#define SLEWCTRL_SLOW		(1 << 6)
+#define SLEWCTRL_FAST		0
 
 /* update macro depending on INPUT_EN and PULL_ENA */
 #undef PIN_OUTPUT
diff --git a/include/dt-bindings/pinctrl/am43xx.h b/include/dt-bindings/pinctrl/am43xx.h
index 9c2e4f8..5f4d0189 100644
--- a/include/dt-bindings/pinctrl/am43xx.h
+++ b/include/dt-bindings/pinctrl/am43xx.h
@@ -18,7 +18,8 @@
 #define PULL_DISABLE		(1 << 16)
 #define PULL_UP			(1 << 17)
 #define INPUT_EN		(1 << 18)
-#define SLEWCTRL_FAST		(1 << 19)
+#define SLEWCTRL_SLOW		(1 << 19)
+#define SLEWCTRL_FAST		0
 #define DS0_PULL_UP_DOWN_EN	(1 << 27)
 
 #define PIN_OUTPUT		(PULL_DISABLE)
diff --git a/include/dt-bindings/pinctrl/mt65xx.h b/include/dt-bindings/pinctrl/mt65xx.h
new file mode 100644
index 0000000..1198f45
--- /dev/null
+++ b/include/dt-bindings/pinctrl/mt65xx.h
@@ -0,0 +1,40 @@
+/*
+ * Copyright (c) 2014 MediaTek Inc.
+ * Author: Hongzhou.Yang <hongzhou.yang@mediatek.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _DT_BINDINGS_PINCTRL_MT65XX_H
+#define _DT_BINDINGS_PINCTRL_MT65XX_H
+
+#define MTK_PIN_NO(x) ((x) << 8)
+#define MTK_GET_PIN_NO(x) ((x) >> 8)
+#define MTK_GET_PIN_FUNC(x) ((x) & 0xf)
+
+#define MTK_PUPD_SET_R1R0_00 100
+#define MTK_PUPD_SET_R1R0_01 101
+#define MTK_PUPD_SET_R1R0_10 102
+#define MTK_PUPD_SET_R1R0_11 103
+
+#define MTK_DRIVE_2mA  2
+#define MTK_DRIVE_4mA  4
+#define MTK_DRIVE_6mA  6
+#define MTK_DRIVE_8mA  8
+#define MTK_DRIVE_10mA 10
+#define MTK_DRIVE_12mA 12
+#define MTK_DRIVE_14mA 14
+#define MTK_DRIVE_16mA 16
+#define MTK_DRIVE_20mA 20
+#define MTK_DRIVE_24mA 24
+#define MTK_DRIVE_28mA 28
+#define MTK_DRIVE_32mA 32
+
+#endif /* _DT_BINDINGS_PINCTRL_MT65XX_H */
diff --git a/include/dt-bindings/pinctrl/qcom,pmic-gpio.h b/include/dt-bindings/pinctrl/qcom,pmic-gpio.h
index fa74d7c..aafa76c 100644
--- a/include/dt-bindings/pinctrl/qcom,pmic-gpio.h
+++ b/include/dt-bindings/pinctrl/qcom,pmic-gpio.h
@@ -48,6 +48,14 @@
 #define PM8058_GPIO_L5			6
 #define PM8058_GPIO_L2			7
 
+/*
+ * Note: PM8916 GPIO1 and GPIO2 are supporting
+ * only L2(1.15V) and L5(1.8V) options
+ */
+#define PM8916_GPIO_VPH			0
+#define PM8916_GPIO_L2			2
+#define PM8916_GPIO_L5			3
+
 #define PM8917_GPIO_VPH			0
 #define PM8917_GPIO_S4			2
 #define PM8917_GPIO_L15			3
@@ -115,6 +123,13 @@
 #define PM8058_GPIO39_MP3_CLK		PMIC_GPIO_FUNC_FUNC1
 #define PM8058_GPIO40_EXT_BB_EN		PMIC_GPIO_FUNC_FUNC1
 
+#define PM8916_GPIO1_BAT_ALRM_OUT	PMIC_GPIO_FUNC_FUNC1
+#define PM8916_GPIO1_KEYP_DRV		PMIC_GPIO_FUNC_FUNC2
+#define PM8916_GPIO2_DIV_CLK		PMIC_GPIO_FUNC_FUNC1
+#define PM8916_GPIO2_SLEEP_CLK		PMIC_GPIO_FUNC_FUNC2
+#define PM8916_GPIO3_KEYP_DRV		PMIC_GPIO_FUNC_FUNC1
+#define PM8916_GPIO4_KEYP_DRV		PMIC_GPIO_FUNC_FUNC2
+
 #define PM8917_GPIO9_18_KEYP_DRV	PMIC_GPIO_FUNC_FUNC1
 #define PM8917_GPIO20_BAT_ALRM_OUT	PMIC_GPIO_FUNC_FUNC1
 #define PM8917_GPIO21_23_UART_TX	PMIC_GPIO_FUNC_FUNC2
diff --git a/include/dt-bindings/pinctrl/qcom,pmic-mpp.h b/include/dt-bindings/pinctrl/qcom,pmic-mpp.h
index d2c7dab..c102054 100644
--- a/include/dt-bindings/pinctrl/qcom,pmic-mpp.h
+++ b/include/dt-bindings/pinctrl/qcom,pmic-mpp.h
@@ -10,6 +10,10 @@
 #define PM8841_MPP_VPH			0
 #define PM8841_MPP_S3			2
 
+#define PM8916_MPP_VPH			0
+#define PM8916_MPP_L2			2
+#define PM8916_MPP_L5			3
+
 #define PM8941_MPP_VPH			0
 #define PM8941_MPP_L1			1
 #define PM8941_MPP_S3			2