Merge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:
 - some V4L2 API updates needed by embedded devices
 - DVB API extensions for ATSC-MH delivery system, used in US for mobile
   TV
 - new tuners for fc0011/0012/0013 and tua9001
 - a new dvb driver for af9033/9035
 - a new ATSC-MH frontend (lg2160)
 - new remote controller keymaps
 - Removal of a few legacy webcam driver that got replaced by gspca on
   several kernel versions ago
 - a new driver for Exynos 4/5 webcams(s5pp fimc-lite)
 - a new webcam sensor driver (smiapp)
 - a new video input driver for embedded (sta2x1xx)
 - several improvements, fixes, cleanups, etc inside the drivers.

Manually fix up conflicts due to err() -> dev_err() conversion in
drivers/staging/media/easycap/easycap_main.c

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (484 commits)
  [media] saa7134-cards: Remove a PCI entry added by mistake
  [media] radio-sf16fmi: add support for SF16-FMD
  [media] rc-loopback: remove duplicate line
  [media] patch for Asus My Cinema PS3-100 (1043:48cd)
  [media] au0828: Move the Kconfig knob under V4L_USB_DRIVERS
  [media] em28xx: simple comment fix
  [media] [resend] radio-sf16fmr2: add PnP support for SF16-FMD2
  [media] smiapp: Use v4l2_ctrl_new_int_menu() instead of v4l2_ctrl_new_custom()
  [media] smiapp: Add support for 8-bit uncompressed formats
  [media] smiapp: Allow generic quirk registers
  [media] smiapp: Use non-binning limits if the binning limit is zero
  [media] smiapp: Initialise rval in smiapp_read_nvm()
  [media] smiapp: Round minimum pre_pll up rather than down in ip_clk_freq check
  [media] smiapp: Use 8-bit reads only before identifying the sensor
  [media] smiapp: Quirk for sensors that only do 8-bit reads
  [media] smiapp: Pass struct sensor to register writing commands instead of i2c_client
  [media] smiapp: Allow using external clock from the clock framework
  [media] zl10353: change .read_snr() to report SNR as a 0.1 dB
  [media] media: add support to gspca/pac7302.c for 093a:2627 (Genius FaceCam 300)
  [media] m88rs2000 - only flip bit 2 on reg 0x70 on 16th try
  ...

1 files changed, 84 insertions, 0 deletions

diff --git a/include/media/smiapp.h b/include/media/smiapp.h
new file mode 100644
index 0000000..9ab07fd
--- /dev/null
+++ b/include/media/smiapp.h
@@ -0,0 +1,84 @@
+/*
+ * include/media/smiapp.h
+ *
+ * Generic driver for SMIA/SMIA++ compliant camera modules
+ *
+ * Copyright (C) 2011--2012 Nokia Corporation
+ * Contact: Sakari Ailus <sakari.ailus@maxwell.research.nokia.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
+ * 02110-1301 USA
+ *
+ */
+
+#ifndef __SMIAPP_H_
+#define __SMIAPP_H_
+
+#include <media/v4l2-subdev.h>
+
+#define SMIAPP_NAME		"smiapp"
+
+#define SMIAPP_DFL_I2C_ADDR	(0x20 >> 1) /* Default I2C Address */
+#define SMIAPP_ALT_I2C_ADDR	(0x6e >> 1) /* Alternate I2C Address */
+
+#define SMIAPP_CSI_SIGNALLING_MODE_CCP2_DATA_CLOCK	0
+#define SMIAPP_CSI_SIGNALLING_MODE_CCP2_DATA_STROBE	1
+#define SMIAPP_CSI_SIGNALLING_MODE_CSI2			2
+
+#define SMIAPP_NO_XSHUTDOWN	-1
+
+/*
+ * Sometimes due to board layout considerations the camera module can be
+ * mounted rotated. The typical rotation used is 180 degrees which can be
+ * corrected by giving a default H-FLIP and V-FLIP in the sensor readout.
+ * FIXME: rotation also changes the bayer pattern.
+ */
+enum smiapp_module_board_orient {
+	SMIAPP_MODULE_BOARD_ORIENT_0 = 0,
+	SMIAPP_MODULE_BOARD_ORIENT_180,
+};
+
+struct smiapp_flash_strobe_parms {
+	u8 mode;
+	u32 strobe_width_high_us;
+	u16 strobe_delay;
+	u16 stobe_start_point;
+	u8 trigger;
+};
+
+struct smiapp_platform_data {
+	/*
+	 * Change the cci address if i2c_addr_alt is set.
+	 * Both default and alternate cci addr need to be present
+	 */
+	unsigned short i2c_addr_dfl;	/* Default i2c addr */
+	unsigned short i2c_addr_alt;	/* Alternate i2c addr */
+
+	unsigned int nvm_size;			/* bytes */
+	unsigned int ext_clk;			/* sensor external clk */
+
+	unsigned int lanes;		/* Number of CSI-2 lanes */
+	u8 csi_signalling_mode;		/* SMIAPP_CSI_SIGNALLING_MODE_* */
+	const s64 *op_sys_clock;
+
+	enum smiapp_module_board_orient module_board_orient;
+
+	struct smiapp_flash_strobe_parms *strobe_setup;
+
+	int (*set_xclk)(struct v4l2_subdev *sd, int hz);
+	char *ext_clk_name;
+	int xshutdown;			/* gpio or SMIAPP_NO_XSHUTDOWN */
+};
+
+#endif /* __SMIAPP_H_  */