Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
 "Another merge window, another set of networking changes.  I've heard
  rumblings that the lightweight tunnels infrastructure has been voted
  networking change of the year.  But what do I know?

   1) Add conntrack support to openvswitch, from Joe Stringer.

   2) Initial support for VRF (Virtual Routing and Forwarding), which
      allows the segmentation of routing paths without using multiple
      devices.  There are some semantic kinks to work out still, but
      this is a reasonably strong foundation.  From David Ahern.

   3) Remove spinlock fro act_bpf fast path, from Alexei Starovoitov.

   4) Ignore route nexthops with a link down state in ipv6, just like
      ipv4.  From Andy Gospodarek.

   5) Remove spinlock from fast path of act_gact and act_mirred, from
      Eric Dumazet.

   6) Document the DSA layer, from Florian Fainelli.

   7) Add netconsole support to bcmgenet, systemport, and DSA.  Also
      from Florian Fainelli.

   8) Add Mellanox Switch Driver and core infrastructure, from Jiri
      Pirko.

   9) Add support for "light weight tunnels", which allow for
      encapsulation and decapsulation without bearing the overhead of a
      full blown netdevice.  From Thomas Graf, Jiri Benc, and a cast of
      others.

  10) Add Identifier Locator Addressing support for ipv6, from Tom
      Herbert.

  11) Support fragmented SKBs in iwlwifi, from Johannes Berg.

  12) Allow perf PMUs to be accessed from eBPF programs, from Kaixu Xia.

  13) Add BQL support to 3c59x driver, from Loganaden Velvindron.

  14) Stop using a zero TX queue length to mean that a device shouldn't
      have a qdisc attached, use an explicit flag instead.  From Phil
      Sutter.

  15) Use generic geneve netdevice infrastructure in openvswitch, from
      Pravin B Shelar.

  16) Add infrastructure to avoid re-forwarding a packet in software
      that was already forwarded by a hardware switch.  From Scott
      Feldman.

  17) Allow AF_PACKET fanout function to be implemented in a bpf
      program, from Willem de Bruijn"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1458 commits)
  netfilter: nf_conntrack: make nf_ct_zone_dflt built-in
  netfilter: nf_dup{4, 6}: fix build error when nf_conntrack disabled
  net: fec: clear receive interrupts before processing a packet
  ipv6: fix exthdrs offload registration in out_rt path
  xen-netback: add support for multicast control
  bgmac: Update fixed_phy_register()
  sock, diag: fix panic in sock_diag_put_filterinfo
  flow_dissector: Use 'const' where possible.
  flow_dissector: Fix function argument ordering dependency
  ixgbe: Resolve "initialized field overwritten" warnings
  ixgbe: Remove bimodal SR-IOV disabling
  ixgbe: Add support for reporting 2.5G link speed
  ixgbe: fix bounds checking in ixgbe_setup_tc for 82598
  ixgbe: support for ethtool set_rxfh
  ixgbe: Avoid needless PHY access on copper phys
  ixgbe: cleanup to use cached mask value
  ixgbe: Remove second instance of lan_id variable
  ixgbe: use kzalloc for allocating one thing
  flow: Move __get_hash_from_flowi{4,6} into flow_dissector.c
  ixgbe: Remove unused PCI bus types
  ...

1 files changed, 36 insertions, 33 deletions

diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index 6b1077c..e3314e5 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -973,6 +973,10 @@ ieee80211_tx_info_clear_status(struct ieee80211_tx_info *info)
  * @RX_FLAG_IV_STRIPPED: The IV/ICV are stripped from this frame.
  *	If this flag is set, the stack cannot do any replay detection
  *	hence the driver or hardware will have to do that.
+ * @RX_FLAG_PN_VALIDATED: Currently only valid for CCMP/GCMP frames, this
+ *	flag indicates that the PN was verified for replay protection.
+ *	Note that this flag is also currently only supported when a frame
+ *	is also decrypted (ie. @RX_FLAG_DECRYPTED must be set)
  * @RX_FLAG_FAILED_FCS_CRC: Set this flag if the FCS check failed on
  *	the frame.
  * @RX_FLAG_FAILED_PLCP_CRC: Set this flag if the PCLP check failed on
@@ -997,9 +1001,6 @@ ieee80211_tx_info_clear_status(struct ieee80211_tx_info *info)
  * @RX_FLAG_AMPDU_DETAILS: A-MPDU details are known, in particular the reference
  *	number (@ampdu_reference) must be populated and be a distinct number for
  *	each A-MPDU
- * @RX_FLAG_AMPDU_REPORT_ZEROLEN: driver reports 0-length subframes
- * @RX_FLAG_AMPDU_IS_ZEROLEN: This is a zero-length subframe, for
- *	monitoring purposes only
  * @RX_FLAG_AMPDU_LAST_KNOWN: last subframe is known, should be set on all
  *	subframes of a single A-MPDU
  * @RX_FLAG_AMPDU_IS_LAST: this subframe is the last subframe of the A-MPDU
@@ -1039,8 +1040,8 @@ enum mac80211_rx_flags {
 	RX_FLAG_NO_SIGNAL_VAL		= BIT(12),
 	RX_FLAG_HT_GF			= BIT(13),
 	RX_FLAG_AMPDU_DETAILS		= BIT(14),
-	RX_FLAG_AMPDU_REPORT_ZEROLEN	= BIT(15),
-	RX_FLAG_AMPDU_IS_ZEROLEN	= BIT(16),
+	RX_FLAG_PN_VALIDATED		= BIT(15),
+	/* bit 16 free */
 	RX_FLAG_AMPDU_LAST_KNOWN	= BIT(17),
 	RX_FLAG_AMPDU_IS_LAST		= BIT(18),
 	RX_FLAG_AMPDU_DELIM_CRC_ERROR	= BIT(19),
@@ -1491,8 +1492,10 @@ enum ieee80211_key_flags {
  * 	- Temporal Authenticator Rx MIC Key (64 bits)
  * @icv_len: The ICV length for this key type
  * @iv_len: The IV length for this key type
+ * @drv_priv: pointer for driver use
  */
 struct ieee80211_key_conf {
+	void *drv_priv;
 	atomic64_t tx_pn;
 	u32 cipher;
 	u8 icv_len;
@@ -1675,7 +1678,6 @@ struct ieee80211_sta_rates {
  * @tdls: indicates whether the STA is a TDLS peer
  * @tdls_initiator: indicates the STA is an initiator of the TDLS link. Only
  *	valid if the STA is a TDLS peer in the first place.
- * @mfp: indicates whether the STA uses management frame protection or not.
  * @txq: per-TID data TX queues (if driver uses the TXQ abstraction)
  */
 struct ieee80211_sta {
@@ -1693,7 +1695,6 @@ struct ieee80211_sta {
 	struct ieee80211_sta_rates __rcu *rates;
 	bool tdls;
 	bool tdls_initiator;
-	bool mfp;
 
 	struct ieee80211_txq *txq[IEEE80211_NUM_TIDS];
 
@@ -1888,6 +1889,9 @@ struct ieee80211_txq {
  * @IEEE80211_HW_SINGLE_SCAN_ON_ALL_BANDS: The HW supports scanning on all bands
  *	in one command, mac80211 doesn't have to run separate scans per band.
  *
+ * @IEEE80211_HW_TDLS_WIDER_BW: The device/driver supports wider bandwidth
+ *	than then BSS bandwidth for a TDLS link on the base channel.
+ *
  * @NUM_IEEE80211_HW_FLAGS: number of hardware flags, used for sizing arrays
  */
 enum ieee80211_hw_flags {
@@ -1920,6 +1924,7 @@ enum ieee80211_hw_flags {
 	IEEE80211_HW_CHANCTX_STA_CSA,
 	IEEE80211_HW_SUPPORTS_CLONED_SKBS,
 	IEEE80211_HW_SINGLE_SCAN_ON_ALL_BANDS,
+	IEEE80211_HW_TDLS_WIDER_BW,
 
 	/* keep last, obviously */
 	NUM_IEEE80211_HW_FLAGS
@@ -3696,20 +3701,28 @@ void ieee80211_free_hw(struct ieee80211_hw *hw);
 void ieee80211_restart_hw(struct ieee80211_hw *hw);
 
 /**
- * ieee80211_napi_add - initialize mac80211 NAPI context
- * @hw: the hardware to initialize the NAPI context on
- * @napi: the NAPI context to initialize
- * @napi_dev: dummy NAPI netdevice, here to not waste the space if the
- *	driver doesn't use NAPI
- * @poll: poll function
- * @weight: default weight
+ * ieee80211_rx_napi - receive frame from NAPI context
+ *
+ * Use this function to hand received frames to mac80211. The receive
+ * buffer in @skb must start with an IEEE 802.11 header. In case of a
+ * paged @skb is used, the driver is recommended to put the ieee80211
+ * header of the frame on the linear part of the @skb to avoid memory
+ * allocation and/or memcpy by the stack.
+ *
+ * This function may not be called in IRQ context. Calls to this function
+ * for a single hardware must be synchronized against each other. Calls to
+ * this function, ieee80211_rx_ni() and ieee80211_rx_irqsafe() may not be
+ * mixed for a single hardware. Must not run concurrently with
+ * ieee80211_tx_status() or ieee80211_tx_status_ni().
+ *
+ * This function must be called with BHs disabled.
  *
- * See also netif_napi_add().
+ * @hw: the hardware this frame came in on
+ * @skb: the buffer to receive, owned by mac80211 after this call
+ * @napi: the NAPI context
  */
-void ieee80211_napi_add(struct ieee80211_hw *hw, struct napi_struct *napi,
-			struct net_device *napi_dev,
-			int (*poll)(struct napi_struct *, int),
-			int weight);
+void ieee80211_rx_napi(struct ieee80211_hw *hw, struct sk_buff *skb,
+		       struct napi_struct *napi);
 
 /**
  * ieee80211_rx - receive frame
@@ -3731,7 +3744,10 @@ void ieee80211_napi_add(struct ieee80211_hw *hw, struct napi_struct *napi,
  * @hw: the hardware this frame came in on
  * @skb: the buffer to receive, owned by mac80211 after this call
  */
-void ieee80211_rx(struct ieee80211_hw *hw, struct sk_buff *skb);
+static inline void ieee80211_rx(struct ieee80211_hw *hw, struct sk_buff *skb)
+{
+	ieee80211_rx_napi(hw, skb, NULL);
+}
 
 /**
  * ieee80211_rx_irqsafe - receive frame
@@ -4315,19 +4331,6 @@ void ieee80211_get_tkip_p2k(struct ieee80211_key_conf *keyconf,
 			    struct sk_buff *skb, u8 *p2k);
 
 /**
- * ieee80211_aes_cmac_calculate_k1_k2 - calculate the AES-CMAC sub keys
- *
- * This function computes the two AES-CMAC sub-keys, based on the
- * previously installed master key.
- *
- * @keyconf: the parameter passed with the set key
- * @k1: a buffer to be filled with the 1st sub-key
- * @k2: a buffer to be filled with the 2nd sub-key
- */
-void ieee80211_aes_cmac_calculate_k1_k2(struct ieee80211_key_conf *keyconf,
-					u8 *k1, u8 *k2);
-
-/**
  * ieee80211_get_key_tx_seq - get key TX sequence counter
  *
  * @keyconf: the parameter passed with the set key