Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
 "Most notable changes in here:

   1) By far the biggest accomplishment, thanks to a large range of
      contributors, is the addition of multi-send for transmit.  This is
      the result of discussions back in Chicago, and the hard work of
      several individuals.

      Now, when the ->ndo_start_xmit() method of a driver sees
      skb->xmit_more as true, it can choose to defer the doorbell
      telling the driver to start processing the new TX queue entires.

      skb->xmit_more means that the generic networking is guaranteed to
      call the driver immediately with another SKB to send.

      There is logic added to the qdisc layer to dequeue multiple
      packets at a time, and the handling mis-predicted offloads in
      software is now done with no locks held.

      Finally, pktgen is extended to have a "burst" parameter that can
      be used to test a multi-send implementation.

      Several drivers have xmit_more support: i40e, igb, ixgbe, mlx4,
      virtio_net

      Adding support is almost trivial, so export more drivers to
      support this optimization soon.

      I want to thank, in no particular or implied order, Jesper
      Dangaard Brouer, Eric Dumazet, Alexander Duyck, Tom Herbert, Jamal
      Hadi Salim, John Fastabend, Florian Westphal, Daniel Borkmann,
      David Tat, Hannes Frederic Sowa, and Rusty Russell.

   2) PTP and timestamping support in bnx2x, from Michal Kalderon.

   3) Allow adjusting the rx_copybreak threshold for a driver via
      ethtool, and add rx_copybreak support to enic driver.  From
      Govindarajulu Varadarajan.

   4) Significant enhancements to the generic PHY layer and the bcm7xxx
      driver in particular (EEE support, auto power down, etc.) from
      Florian Fainelli.

   5) Allow raw buffers to be used for flow dissection, allowing drivers
      to determine the optimal "linear pull" size for devices that DMA
      into pools of pages.  The objective is to get exactly the
      necessary amount of headers into the linear SKB area pre-pulled,
      but no more.  The new interface drivers use is eth_get_headlen().
      From WANG Cong, with driver conversions (several had their own
      by-hand duplicated implementations) by Alexander Duyck and Eric
      Dumazet.

   6) Support checksumming more smoothly and efficiently for
      encapsulations, and add "foo over UDP" facility.  From Tom
      Herbert.

   7) Add Broadcom SF2 switch driver to DSA layer, from Florian
      Fainelli.

   8) eBPF now can load programs via a system call and has an extensive
      testsuite.  Alexei Starovoitov and Daniel Borkmann.

   9) Major overhaul of the packet scheduler to use RCU in several major
      areas such as the classifiers and rate estimators.  From John
      Fastabend.

  10) Add driver for Intel FM10000 Ethernet Switch, from Alexander
      Duyck.

  11) Rearrange TCP_SKB_CB() to reduce cache line misses, from Eric
      Dumazet.

  12) Add Datacenter TCP congestion control algorithm support, From
      Florian Westphal.

  13) Reorganize sk_buff so that __copy_skb_header() is significantly
      faster.  From Eric Dumazet"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1558 commits)
  netlabel: directly return netlbl_unlabel_genl_init()
  net: add netdev_txq_bql_{enqueue, complete}_prefetchw() helpers
  net: description of dma_cookie cause make xmldocs warning
  cxgb4: clean up a type issue
  cxgb4: potential shift wrapping bug
  i40e: skb->xmit_more support
  net: fs_enet: Add NAPI TX
  net: fs_enet: Remove non NAPI RX
  r8169:add support for RTL8168EP
  net_sched: copy exts->type in tcf_exts_change()
  wimax: convert printk to pr_foo()
  af_unix: remove 0 assignment on static
  ipv6: Do not warn for informational ICMP messages, regardless of type.
  Update Intel Ethernet Driver maintainers list
  bridge: Save frag_max_size between PRE_ROUTING and POST_ROUTING
  tipc: fix bug in multicast congestion handling
  net: better IFF_XMIT_DST_RELEASE support
  net/mlx4_en: remove NETDEV_TX_BUSY
  3c59x: fix bad split of cpu_to_le32(pci_map_single())
  net: bcmgenet: fix Tx ring priority programming
  ...

1 files changed, 16 insertions, 18 deletions

diff --git a/include/net/mac80211.h b/include/net/mac80211.h
index dae2e24..0ad1f47 100644
--- a/include/net/mac80211.h
+++ b/include/net/mac80211.h
@@ -4,6 +4,7 @@
  * Copyright 2002-2005, Devicescape Software, Inc.
  * Copyright 2006-2007	Jiri Benc <jbenc@suse.cz>
  * Copyright 2007-2010	Johannes Berg <johannes@sipsolutions.net>
+ * Copyright 2013-2014  Intel Mobile Communications GmbH
  *
  * This program is free software; you can redistribute it and/or modify
  * it under the terms of the GNU General Public License version 2 as
@@ -1226,7 +1227,8 @@ struct ieee80211_vif *wdev_to_ieee80211_vif(struct wireless_dev *wdev);
  *
  * @IEEE80211_KEY_FLAG_GENERATE_IV: This flag should be set by the
  *	driver to indicate that it requires IV generation for this
- *	particular key.
+ *	particular key. Setting this flag does not necessarily mean that SKBs
+ *	will have sufficient tailroom for ICV or MIC.
  * @IEEE80211_KEY_FLAG_GENERATE_MMIC: This flag should be set by
  *	the driver for a TKIP key if it requires Michael MIC
  *	generation in software.
@@ -1238,7 +1240,9 @@ struct ieee80211_vif *wdev_to_ieee80211_vif(struct wireless_dev *wdev);
  * @IEEE80211_KEY_FLAG_PUT_IV_SPACE: This flag should be set by the driver
  *	if space should be prepared for the IV, but the IV
  *	itself should not be generated. Do not set together with
- *	@IEEE80211_KEY_FLAG_GENERATE_IV on the same key.
+ *	@IEEE80211_KEY_FLAG_GENERATE_IV on the same key. Setting this flag does
+ *	not necessarily mean that SKBs will have sufficient tailroom for ICV or
+ *	MIC.
  * @IEEE80211_KEY_FLAG_RX_MGMT: This key will be used to decrypt received
  *	management frames. The flag can help drivers that have a hardware
  *	crypto implementation that doesn't deal with management frames
@@ -1405,7 +1409,7 @@ struct ieee80211_sta_rates {
  * @supp_rates: Bitmap of supported rates (per band)
  * @ht_cap: HT capabilities of this STA; restricted to our own capabilities
  * @vht_cap: VHT capabilities of this STA; restricted to our own capabilities
- * @wme: indicates whether the STA supports WME. Only valid during AP-mode.
+ * @wme: indicates whether the STA supports QoS/WME.
  * @drv_priv: data area for driver use, will always be aligned to
  *	sizeof(void *), size is determined in hw information.
  * @uapsd_queues: bitmap of queues configured for uapsd. Only valid
@@ -1533,16 +1537,6 @@ struct ieee80211_tx_control {
  * @IEEE80211_HW_MFP_CAPABLE:
  *	Hardware supports management frame protection (MFP, IEEE 802.11w).
  *
- * @IEEE80211_HW_SUPPORTS_STATIC_SMPS:
- *	Hardware supports static spatial multiplexing powersave,
- *	ie. can turn off all but one chain even on HT connections
- *	that should be using more chains.
- *
- * @IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS:
- *	Hardware supports dynamic spatial multiplexing powersave,
- *	ie. can turn off all but one chain and then wake the rest
- *	up as required after, for example, rts/cts handshake.
- *
  * @IEEE80211_HW_SUPPORTS_UAPSD:
  *	Hardware supports Unscheduled Automatic Power Save Delivery
  *	(U-APSD) in managed mode. The mode is configured with
@@ -1606,6 +1600,9 @@ struct ieee80211_tx_control {
  *	is not enabled the default action is to disconnect when getting the
  *	CSA frame.
  *
+ * @IEEE80211_HW_SUPPORTS_CLONED_SKBS: The driver will never modify the payload
+ *	or tailroom of TX skbs without copying them first.
+ *
  * @IEEE80211_SINGLE_HW_SCAN_ON_ALL_BANDS: The HW supports scanning on all bands
  *	in one command, mac80211 doesn't have to run separate scans per band.
  */
@@ -1625,8 +1622,7 @@ enum ieee80211_hw_flags {
 	IEEE80211_HW_SUPPORTS_DYNAMIC_PS		= 1<<12,
 	IEEE80211_HW_MFP_CAPABLE			= 1<<13,
 	IEEE80211_HW_WANT_MONITOR_VIF			= 1<<14,
-	IEEE80211_HW_SUPPORTS_STATIC_SMPS		= 1<<15,
-	IEEE80211_HW_SUPPORTS_DYNAMIC_SMPS		= 1<<16,
+	/* free slots */
 	IEEE80211_HW_SUPPORTS_UAPSD			= 1<<17,
 	IEEE80211_HW_REPORTS_TX_ACK_STATUS		= 1<<18,
 	IEEE80211_HW_CONNECTION_MONITOR			= 1<<19,
@@ -1639,7 +1635,7 @@ enum ieee80211_hw_flags {
 	IEEE80211_HW_TIMING_BEACON_ONLY			= 1<<26,
 	IEEE80211_HW_SUPPORTS_HT_CCK_RATES		= 1<<27,
 	IEEE80211_HW_CHANCTX_STA_CSA			= 1<<28,
-	/* bit 29 unused */
+	IEEE80211_HW_SUPPORTS_CLONED_SKBS		= 1<<29,
 	IEEE80211_SINGLE_HW_SCAN_ON_ALL_BANDS		= 1<<30,
 };
 
@@ -2666,7 +2662,9 @@ enum ieee80211_roc_type {
  *
  * @set_coverage_class: Set slot time for given coverage class as specified
  *	in IEEE 802.11-2007 section 17.3.8.6 and modify ACK timeout
- *	accordingly. This callback is not required and may sleep.
+ *	accordingly; coverage class equals to -1 to enable ACK timeout
+ *	estimation algorithm (dynack). To disable dynack set valid value for
+ *	coverage class. This callback is not required and may sleep.
  *
  * @testmode_cmd: Implement a cfg80211 test mode command. The passed @vif may
  *	be %NULL. The callback can sleep.
@@ -2950,7 +2948,7 @@ struct ieee80211_ops {
 	int (*get_survey)(struct ieee80211_hw *hw, int idx,
 		struct survey_info *survey);
 	void (*rfkill_poll)(struct ieee80211_hw *hw);
-	void (*set_coverage_class)(struct ieee80211_hw *hw, u8 coverage_class);
+	void (*set_coverage_class)(struct ieee80211_hw *hw, s16 coverage_class);
 #ifdef CONFIG_NL80211_TESTMODE
 	int (*testmode_cmd)(struct ieee80211_hw *hw, struct ieee80211_vif *vif,
 			    void *data, int len);