Revert "[media] mfd: Add header files and Kbuild plumbing for SI476x MFD core"

As requested by Samuel Ortiz <sameo@linux.intel.com>, revert
this patch.

This reverts commit 3f8ec5df11aa2ad7402cfb3368532a96b63426a4.

Conflicts:
	drivers/mfd/Kconfig

Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>

1 files changed, 0 insertions, 525 deletions

diff --git a/include/linux/mfd/si476x-core.h b/include/linux/mfd/si476x-core.h
deleted file mode 100644
index 2136b26..0000000
--- a/include/linux/mfd/si476x-core.h
+++ /dev/null
@@ -1,525 +0,0 @@
-/*
- * include/media/si476x-core.h -- Common definitions for si476x core
- * device
- *
- * Copyright (C) 2012 Innovative Converged Devices(ICD)
- *
- * Author: Andrey Smirnov <andrey.smirnov@convergeddevices.net>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; version 2 of the License.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * General Public License for more details.
- *
- */
-
-#ifndef SI476X_CORE_H
-#define SI476X_CORE_H
-
-#include <linux/kfifo.h>
-#include <linux/atomic.h>
-#include <linux/i2c.h>
-#include <linux/regmap.h>
-#include <linux/mutex.h>
-#include <linux/mfd/core.h>
-#include <linux/videodev2.h>
-#include <linux/regulator/consumer.h>
-
-#include <media/si476x.h>
-
-/* Command Timeouts */
-#define SI476X_DEFAULT_TIMEOUT	100000
-#define SI476X_TIMEOUT_TUNE	700000
-#define SI476X_TIMEOUT_POWER_UP	330000
-#define SI476X_STATUS_POLL_US	0
-
-/* -------------------- si476x-i2c.c ----------------------- */
-
-enum si476x_freq_supported_chips {
-	SI476X_CHIP_SI4761 = 1,
-	SI476X_CHIP_SI4764,
-	SI476X_CHIP_SI4768,
-};
-
-enum si476x_mfd_cells {
-	SI476X_RADIO_CELL = 0,
-	SI476X_CODEC_CELL,
-	SI476X_MFD_CELLS,
-};
-
-/**
- * enum si476x_power_state - possible power state of the si476x
- * device.
- *
- * @SI476X_POWER_DOWN: In this state all regulators are turned off
- * and the reset line is pulled low. The device is completely
- * inactive.
- * @SI476X_POWER_UP_FULL: In this state all the power regualtors are
- * turned on, reset line pulled high, IRQ line is enabled(polling is
- * active for polling use scenario) and device is turned on with
- * POWER_UP command. The device is ready to be used.
- * @SI476X_POWER_INCONSISTENT: This state indicates that previous
- * power down was inconsistent, meaning some of the regulators were
- * not turned down and thus use of the device, without power-cycling
- * is impossible.
- */
-enum si476x_power_state {
-	SI476X_POWER_DOWN		= 0,
-	SI476X_POWER_UP_FULL		= 1,
-	SI476X_POWER_INCONSISTENT	= 2,
-};
-
-/**
- * struct si476x_core - internal data structure representing the
- * underlying "core" device which all the MFD cell-devices use.
- *
- * @client: Actual I2C client used to transfer commands to the chip.
- * @chip_id: Last digit of the chip model(E.g. "1" for SI4761)
- * @cells: MFD cell devices created by this driver.
- * @cmd_lock: Mutex used to serialize all the requests to the core
- * device. This filed should not be used directly. Instead
- * si476x_core_lock()/si476x_core_unlock() should be used to get
- * exclusive access to the "core" device.
- * @users: Active users counter(Used by the radio cell)
- * @rds_read_queue: Wait queue used to wait for RDS data.
- * @rds_fifo: FIFO in which all the RDS data received from the chip is
- * placed.
- * @rds_fifo_drainer: Worker that drains on-chip RDS FIFO.
- * @rds_drainer_is_working: Flag used for launching only one instance
- * of the @rds_fifo_drainer.
- * @rds_drainer_status_lock: Lock used to guard access to the
- * @rds_drainer_is_working variable.
- * @command: Wait queue for wainting on the command comapletion.
- * @cts: Clear To Send flag set upon receiving first status with CTS
- * set.
- * @tuning: Wait queue used for wainting for tune/seek comand
- * completion.
- * @stc: Similar to @cts, but for the STC bit of the status value.
- * @power_up_parameters: Parameters used as argument for POWER_UP
- * command when the device is started.
- * @state: Current power state of the device.
- * @supplues: Structure containing handles to all power supplies used
- * by the device (NULL ones are ignored).
- * @gpio_reset: GPIO pin connectet to the RSTB pin of the chip.
- * @pinmux: Chip's configurable pins configuration.
- * @diversity_mode: Chips role when functioning in diversity mode.
- * @status_monitor: Polling worker used in polling use case scenarion
- * (when IRQ is not avalible).
- * @revision: Chip's running firmware revision number(Used for correct
- * command set support).
- */
-
-struct si476x_core {
-	struct i2c_client *client;
-	struct regmap *regmap;
-	int chip_id;
-	struct mfd_cell cells[SI476X_MFD_CELLS];
-
-	struct mutex cmd_lock; /* for serializing fm radio operations */
-	atomic_t users;
-
-	wait_queue_head_t  rds_read_queue;
-	struct kfifo       rds_fifo;
-	struct work_struct rds_fifo_drainer;
-	bool               rds_drainer_is_working;
-	struct mutex       rds_drainer_status_lock;
-
-	wait_queue_head_t command;
-	atomic_t          cts;
-
-	wait_queue_head_t tuning;
-	atomic_t          stc;
-
-	struct si476x_power_up_args power_up_parameters;
-
-	enum si476x_power_state power_state;
-
-	struct regulator_bulk_data supplies[4];
-
-	int gpio_reset;
-
-	struct si476x_pinmux pinmux;
-	enum si476x_phase_diversity_mode diversity_mode;
-
-	atomic_t is_alive;
-
-	struct delayed_work status_monitor;
-#define SI476X_WORK_TO_CORE(w) container_of(to_delayed_work(w),	\
-					    struct si476x_core,	\
-					    status_monitor)
-
-	int revision;
-
-	int rds_fifo_depth;
-};
-
-static inline struct si476x_core *i2c_mfd_cell_to_core(struct device *dev)
-{
-	struct i2c_client *client = to_i2c_client(dev->parent);
-	return i2c_get_clientdata(client);
-}
-
-
-/**
- * si476x_core_lock() - lock the core device to get an exclusive access
- * to it.
- */
-static inline void si476x_core_lock(struct si476x_core *core)
-{
-	mutex_lock(&core->cmd_lock);
-}
-
-/**
- * si476x_core_unlock() - unlock the core device to relinquish an
- * exclusive access to it.
- */
-static inline void si476x_core_unlock(struct si476x_core *core)
-{
-	mutex_unlock(&core->cmd_lock);
-}
-
-/* *_TUNE_FREQ family of commands accept frequency in multiples of
-    10kHz */
-static inline u16 hz_to_si476x(struct si476x_core *core, int freq)
-{
-	u16 result;
-
-	switch (core->power_up_parameters.func) {
-	default:
-	case SI476X_FUNC_FM_RECEIVER:
-		result = freq / 10000;
-		break;
-	case SI476X_FUNC_AM_RECEIVER:
-		result = freq / 1000;
-		break;
-	}
-
-	return result;
-}
-
-static inline int si476x_to_hz(struct si476x_core *core, u16 freq)
-{
-	int result;
-
-	switch (core->power_up_parameters.func) {
-	default:
-	case SI476X_FUNC_FM_RECEIVER:
-		result = freq * 10000;
-		break;
-	case SI476X_FUNC_AM_RECEIVER:
-		result = freq * 1000;
-		break;
-	}
-
-	return result;
-}
-
-/* Since the V4L2_TUNER_CAP_LOW flag is supplied, V4L2 subsystem
- * mesures frequency in 62.5 Hz units */
-
-static inline int hz_to_v4l2(int freq)
-{
-	return (freq * 10) / 625;
-}
-
-static inline int v4l2_to_hz(int freq)
-{
-	return (freq * 625) / 10;
-}
-
-static inline u16 v4l2_to_si476x(struct si476x_core *core, int freq)
-{
-	return hz_to_si476x(core, v4l2_to_hz(freq));
-}
-
-static inline int si476x_to_v4l2(struct si476x_core *core, u16 freq)
-{
-	return hz_to_v4l2(si476x_to_hz(core, freq));
-}
-
-
-
-/**
- * struct si476x_func_info - structure containing result of the
- * FUNC_INFO command.
- *
- * @firmware.major: Firmware major number.
- * @firmware.minor[...]: Firmware minor numbers.
- * @patch_id:
- * @func: Mode tuner is working in.
- */
-struct si476x_func_info {
-	struct {
-		u8 major, minor[2];
-	} firmware;
-	u16 patch_id;
-	enum si476x_func func;
-};
-
-/**
- * struct si476x_power_down_args - structure used to pass parameters
- * to POWER_DOWN command
- *
- * @xosc: true - Power down, but leav oscillator running.
- *        false - Full power down.
- */
-struct si476x_power_down_args {
-	bool xosc;
-};
-
-/**
- * enum si476x_tunemode - enum representing possible tune modes for
- * the chip.
- * @SI476X_TM_VALIDATED_NORMAL_TUNE: Unconditionally stay on the new
- * channel after tune, tune status is valid.
- * @SI476X_TM_INVALIDATED_FAST_TUNE: Unconditionally stay in the new
- * channel after tune, tune status invalid.
- * @SI476X_TM_VALIDATED_AF_TUNE: Jump back to previous channel if
- * metric thresholds are not met.
- * @SI476X_TM_VALIDATED_AF_CHECK: Unconditionally jump back to the
- * previous channel.
- */
-enum si476x_tunemode {
-	SI476X_TM_VALIDATED_NORMAL_TUNE = 0,
-	SI476X_TM_INVALIDATED_FAST_TUNE = 1,
-	SI476X_TM_VALIDATED_AF_TUNE     = 2,
-	SI476X_TM_VALIDATED_AF_CHECK    = 3,
-};
-
-/**
- * enum si476x_smoothmetrics - enum containing the possible setting fo
- * audio transitioning of the chip
- * @SI476X_SM_INITIALIZE_AUDIO: Initialize audio state to match this
- * new channel
- * @SI476X_SM_TRANSITION_AUDIO: Transition audio state from previous
- * channel values to the new values
- */
-enum si476x_smoothmetrics {
-	SI476X_SM_INITIALIZE_AUDIO = 0,
-	SI476X_SM_TRANSITION_AUDIO = 1,
-};
-
-/**
- * struct si476x_rds_status_report - the structure representing the
- * response to 'FM_RD_STATUS' command
- * @rdstpptyint: Traffic program flag(TP) and/or program type(PTY)
- * code has changed.
- * @rdspiint: Program indentifiaction(PI) code has changed.
- * @rdssyncint: RDS synchronization has changed.
- * @rdsfifoint: RDS was received and the RDS FIFO has at least
- * 'FM_RDS_INTERRUPT_FIFO_COUNT' elements in it.
- * @tpptyvalid: TP flag and PTY code are valid falg.
- * @pivalid: PI code is valid flag.
- * @rdssync: RDS is currently synchronized.
- * @rdsfifolost: On or more RDS groups have been lost/discarded flag.
- * @tp: Current channel's TP flag.
- * @pty: Current channel's PTY code.
- * @pi: Current channel's PI code.
- * @rdsfifoused: Number of blocks remaining in the RDS FIFO (0 if
- * empty).
- */
-struct si476x_rds_status_report {
-	bool rdstpptyint, rdspiint, rdssyncint, rdsfifoint;
-	bool tpptyvalid, pivalid, rdssync, rdsfifolost;
-	bool tp;
-
-	u8 pty;
-	u16 pi;
-
-	u8 rdsfifoused;
-	u8 ble[4];
-
-	struct v4l2_rds_data rds[4];
-};
-
-struct si476x_rsq_status_args {
-	bool primary;
-	bool rsqack;
-	bool attune;
-	bool cancel;
-	bool stcack;
-};
-
-enum si476x_injside {
-	SI476X_INJSIDE_AUTO	= 0,
-	SI476X_INJSIDE_LOW	= 1,
-	SI476X_INJSIDE_HIGH	= 2,
-};
-
-struct si476x_tune_freq_args {
-	bool zifsr;
-	bool hd;
-	enum si476x_injside injside;
-	int freq;
-	enum si476x_tunemode tunemode;
-	enum si476x_smoothmetrics smoothmetrics;
-	int antcap;
-};
-
-int  si476x_core_stop(struct si476x_core *, bool);
-int  si476x_core_start(struct si476x_core *, bool);
-int  si476x_core_set_power_state(struct si476x_core *, enum si476x_power_state);
-bool si476x_core_has_am(struct si476x_core *);
-bool si476x_core_has_diversity(struct si476x_core *);
-bool si476x_core_is_a_secondary_tuner(struct si476x_core *);
-bool si476x_core_is_a_primary_tuner(struct si476x_core *);
-bool si476x_core_is_in_am_receiver_mode(struct si476x_core *core);
-bool si476x_core_is_powered_up(struct si476x_core *core);
-
-enum si476x_i2c_type {
-	SI476X_I2C_SEND,
-	SI476X_I2C_RECV
-};
-
-int si476x_core_i2c_xfer(struct si476x_core *,
-			 enum si476x_i2c_type,
-			 char *, int);
-
-
-/* -------------------- si476x-cmd.c ----------------------- */
-
-int si476x_core_cmd_func_info(struct si476x_core *, struct si476x_func_info *);
-int si476x_core_cmd_set_property(struct si476x_core *, u16, u16);
-int si476x_core_cmd_get_property(struct si476x_core *, u16);
-int si476x_core_cmd_dig_audio_pin_cfg(struct si476x_core *,
-				      enum si476x_dclk_config,
-				      enum si476x_dfs_config,
-				      enum si476x_dout_config,
-				      enum si476x_xout_config);
-int si476x_core_cmd_zif_pin_cfg(struct si476x_core *,
-				enum si476x_iqclk_config,
-				enum si476x_iqfs_config,
-				enum si476x_iout_config,
-				enum si476x_qout_config);
-int si476x_core_cmd_ic_link_gpo_ctl_pin_cfg(struct si476x_core *,
-					    enum si476x_icin_config,
-					    enum si476x_icip_config,
-					    enum si476x_icon_config,
-					    enum si476x_icop_config);
-int si476x_core_cmd_ana_audio_pin_cfg(struct si476x_core *,
-				      enum si476x_lrout_config);
-int si476x_core_cmd_intb_pin_cfg(struct si476x_core *, enum si476x_intb_config,
-				 enum si476x_a1_config);
-int si476x_core_cmd_fm_seek_start(struct si476x_core *, bool, bool);
-int si476x_core_cmd_am_seek_start(struct si476x_core *, bool, bool);
-int si476x_core_cmd_fm_rds_status(struct si476x_core *, bool, bool, bool,
-				  struct si476x_rds_status_report *);
-int si476x_core_cmd_fm_rds_blockcount(struct si476x_core *, bool,
-				      struct si476x_rds_blockcount_report *);
-int si476x_core_cmd_fm_tune_freq(struct si476x_core *,
-				 struct si476x_tune_freq_args *);
-int si476x_core_cmd_am_tune_freq(struct si476x_core *,
-				 struct si476x_tune_freq_args *);
-int si476x_core_cmd_am_rsq_status(struct si476x_core *,
-				  struct si476x_rsq_status_args *,
-				  struct si476x_rsq_status_report *);
-int si476x_core_cmd_fm_rsq_status(struct si476x_core *,
-				  struct si476x_rsq_status_args *,
-				  struct si476x_rsq_status_report *);
-int si476x_core_cmd_power_up(struct si476x_core *,
-			     struct si476x_power_up_args *);
-int si476x_core_cmd_power_down(struct si476x_core *,
-			       struct si476x_power_down_args *);
-int si476x_core_cmd_fm_phase_div_status(struct si476x_core *);
-int si476x_core_cmd_fm_phase_diversity(struct si476x_core *,
-				       enum si476x_phase_diversity_mode);
-
-int si476x_core_cmd_fm_acf_status(struct si476x_core *,
-				  struct si476x_acf_status_report *);
-int si476x_core_cmd_am_acf_status(struct si476x_core *,
-				  struct si476x_acf_status_report *);
-int si476x_core_cmd_agc_status(struct si476x_core *,
-			       struct si476x_agc_status_report *);
-
-enum si476x_power_grid_type {
-	SI476X_POWER_GRID_50HZ = 0,
-	SI476X_POWER_GRID_60HZ,
-};
-
-/* Properties  */
-
-enum si476x_interrupt_flags {
-	SI476X_STCIEN = (1 << 0),
-	SI476X_ACFIEN = (1 << 1),
-	SI476X_RDSIEN = (1 << 2),
-	SI476X_RSQIEN = (1 << 3),
-
-	SI476X_ERRIEN = (1 << 6),
-	SI476X_CTSIEN = (1 << 7),
-
-	SI476X_STCREP = (1 << 8),
-	SI476X_ACFREP = (1 << 9),
-	SI476X_RDSREP = (1 << 10),
-	SI476X_RSQREP = (1 << 11),
-};
-
-enum si476x_rdsint_sources {
-	SI476X_RDSTPPTY = (1 << 4),
-	SI476X_RDSPI    = (1 << 3),
-	SI476X_RDSSYNC	= (1 << 1),
-	SI476X_RDSRECV	= (1 << 0),
-};
-
-enum si476x_status_response_bits {
-	SI476X_CTS	  = (1 << 7),
-	SI476X_ERR	  = (1 << 6),
-	/* Status response for WB receiver */
-	SI476X_WB_ASQ_INT = (1 << 4),
-	SI476X_RSQ_INT    = (1 << 3),
-	/* Status response for FM receiver */
-	SI476X_FM_RDS_INT = (1 << 2),
-	SI476X_ACF_INT    = (1 << 1),
-	SI476X_STC_INT    = (1 << 0),
-};
-
-/* -------------------- si476x-prop.c ----------------------- */
-
-enum si476x_common_receiver_properties {
-	SI476X_PROP_INT_CTL_ENABLE			= 0x0000,
-	SI476X_PROP_DIGITAL_IO_INPUT_SAMPLE_RATE	= 0x0200,
-	SI476X_PROP_DIGITAL_IO_INPUT_FORMAT		= 0x0201,
-	SI476X_PROP_DIGITAL_IO_OUTPUT_SAMPLE_RATE	= 0x0202,
-	SI476X_PROP_DIGITAL_IO_OUTPUT_FORMAT		= 0x0203,
-
-	SI476X_PROP_SEEK_BAND_BOTTOM			= 0x1100,
-	SI476X_PROP_SEEK_BAND_TOP			= 0x1101,
-	SI476X_PROP_SEEK_FREQUENCY_SPACING		= 0x1102,
-
-	SI476X_PROP_VALID_MAX_TUNE_ERROR		= 0x2000,
-	SI476X_PROP_VALID_SNR_THRESHOLD			= 0x2003,
-	SI476X_PROP_VALID_RSSI_THRESHOLD		= 0x2004,
-};
-
-enum si476x_am_receiver_properties {
-	SI476X_PROP_AUDIO_PWR_LINE_FILTER		= 0x0303,
-};
-
-enum si476x_fm_receiver_properties {
-	SI476X_PROP_AUDIO_DEEMPHASIS			= 0x0302,
-
-	SI476X_PROP_FM_RDS_INTERRUPT_SOURCE		= 0x4000,
-	SI476X_PROP_FM_RDS_INTERRUPT_FIFO_COUNT		= 0x4001,
-	SI476X_PROP_FM_RDS_CONFIG			= 0x4002,
-};
-
-enum si476x_prop_audio_pwr_line_filter_bits {
-	SI476X_PROP_PWR_HARMONICS_MASK	= 0b0000000000011111,
-	SI476X_PROP_PWR_GRID_MASK	= 0b0000000100000000,
-	SI476X_PROP_PWR_ENABLE_MASK	= 0b0000001000000000,
-	SI476X_PROP_PWR_GRID_50HZ	= 0b0000000000000000,
-	SI476X_PROP_PWR_GRID_60HZ	= 0b0000000100000000,
-};
-
-enum si476x_prop_fm_rds_config_bits {
-	SI476X_PROP_RDSEN_MASK	= 0x1,
-	SI476X_PROP_RDSEN	= 0x1,
-};
-
-
-struct regmap *devm_regmap_init_si476x(struct si476x_core *);
-
-#endif	/* SI476X_CORE_H */