Merge tag 'pinctrl-for-v3.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control updates from Linus Walleij:
 "Main pin control pull request for the v3.13 cycle.

  The changes hitting arch/blackfin are ACKed by the Blackfin
  maintainer, and the device tree bindings are ACKed to the extent
  possible by someone from the device tree maintainers group.

   - Blackfin ADI pin control driver, we move yet another architecture
     under this subsystem umbrella.

   - Incremental updates to the Renesas Super-H PFC pin control driver.
     New subdriver for the r8a7791 SoC.

   - Non-linear GPIO ranges from the gpiolib side of things, this
     enabled simplified device tree bindings by referring entire groups
     of pins on some pin controller to act as back-end for a certain
     GPIO-chip driver.

   - Add the Abilis TB10x pin control driver used on the ARC
     architecture.  Also the corresponding GPIO driver is merged through
     this tree, so the ARC has full support for pins and GPIOs after
     this.

   - Subdrivers for Freescale i.MX1, i.MX27 and i.MX50 pin controller
     instances.  The i.MX1 and i.MX27 is an entirely new family
     (silicon) of controllers whereas i.MX50 is a variant of the
     previous supported controller.

   - Then the usual slew of fixes, cleanups and incremental updates"

The ARC DT changes are apparently still pending, that hopefully gets
sorted out in a timely manner.

* tag 'pinctrl-for-v3.13-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (48 commits)
  pinctrl: imx50: add pinctrl support code for the IMX50 SoC
  pinctrl: at91: copy define to driver
  pinctrl: remove minor dead code
  pinctrl: imx: fix using pin->input_val wrongly
  pinctrl: imx1: fix return value check in imx1_pinctrl_core_probe()
  gpio: tb10x: fix return value check in tb10x_gpio_probe()
  gpio: tb10x: use module_platform_driver to simplify the code
  pinctrl: imx27: imx27 pincontrol driver
  pinctrl: imx1 core driver
  pinctrl: sh-pfc: r8a7791 PFC support
  sh-pfc: r8a7778: Add CAN pin groups
  gpio: add TB10x GPIO driver
  pinctrl: at91: correct a few typos
  pinctrl: mvebu: remove redundant of_match_ptr
  pinctrl: tb10x: use module_platform_driver to simplify the code
  pinctrl: tb10x: fix the error handling in tb10x_pinctrl_probe()
  pinctrl: add documentation for pinctrl_get_group_pins()
  pinctrl: rockchip: emulate both edge triggered interrupts
  pinctrl: rockchip: add rk3188 specifics
  pinctrl: rockchip: remove redundant check
  ...

5 files changed, 64 insertions, 1 deletions

diff --git a/include/asm-generic/gpio.h b/include/asm-generic/gpio.h
index bde6469..523f405 100644
--- a/include/asm-generic/gpio.h
+++ b/include/asm-generic/gpio.h
@@ -228,6 +228,9 @@ struct gpio_pin_range {
 int gpiochip_add_pin_range(struct gpio_chip *chip, const char *pinctl_name,
 			   unsigned int gpio_offset, unsigned int pin_offset,
 			   unsigned int npins);
+int gpiochip_add_pingroup_range(struct gpio_chip *chip,
+			struct pinctrl_dev *pctldev,
+			unsigned int gpio_offset, const char *pin_group);
 void gpiochip_remove_pin_ranges(struct gpio_chip *chip);
 
 #else
@@ -239,6 +242,13 @@ gpiochip_add_pin_range(struct gpio_chip *chip, const char *pinctl_name,
 {
 	return 0;
 }
+static inline int
+gpiochip_add_pingroup_range(struct gpio_chip *chip,
+			struct pinctrl_dev *pctldev,
+			unsigned int gpio_offset, const char *pin_group)
+{
+	return 0;
+}
 
 static inline void
 gpiochip_remove_pin_ranges(struct gpio_chip *chip)
diff --git a/include/dt-bindings/pinctrl/at91.h b/include/dt-bindings/pinctrl/at91.h
index d7988b4..0fee6ff 100644
--- a/include/dt-bindings/pinctrl/at91.h
+++ b/include/dt-bindings/pinctrl/at91.h
@@ -16,7 +16,7 @@
 #define AT91_PINCTRL_PULL_DOWN		(1 << 3)
 #define AT91_PINCTRL_DIS_SCHMIT		(1 << 4)
 #define AT91_PINCTRL_DEBOUNCE		(1 << 16)
-#define AT91_PINCTRL_DEBOUNCE_VA(x)	(x << 17)
+#define AT91_PINCTRL_DEBOUNCE_VAL(x)	(x << 17)
 
 #define AT91_PINCTRL_PULL_UP_DEGLITCH	(AT91_PINCTRL_PULL_UP | AT91_PINCTRL_DEGLITCH)
 
diff --git a/include/linux/gpio.h b/include/linux/gpio.h
index 552e3f4..b8d0e53 100644
--- a/include/linux/gpio.h
+++ b/include/linux/gpio.h
@@ -80,6 +80,7 @@ static inline int irq_to_gpio(unsigned int irq)
 #include <linux/types.h>
 #include <linux/errno.h>
 #include <linux/bug.h>
+#include <linux/pinctrl/pinctrl.h>
 
 struct device;
 struct gpio_chip;
@@ -220,6 +221,15 @@ gpiochip_add_pin_range(struct gpio_chip *chip, const char *pinctl_name,
 	return -EINVAL;
 }
 
+static inline int
+gpiochip_add_pingroup_range(struct gpio_chip *chip,
+			struct pinctrl_dev *pctldev,
+			unsigned int gpio_offset, const char *pin_group)
+{
+	WARN_ON(1);
+	return -EINVAL;
+}
+
 static inline void
 gpiochip_remove_pin_ranges(struct gpio_chip *chip)
 {
diff --git a/include/linux/pinctrl/pinctrl.h b/include/linux/pinctrl/pinctrl.h
index 5979147..fefb886 100644
--- a/include/linux/pinctrl/pinctrl.h
+++ b/include/linux/pinctrl/pinctrl.h
@@ -144,6 +144,9 @@ extern struct pinctrl_dev *pinctrl_find_and_add_gpio_range(const char *devname,
 extern struct pinctrl_gpio_range *
 pinctrl_find_gpio_range_from_pin(struct pinctrl_dev *pctldev,
 				 unsigned int pin);
+extern int pinctrl_get_group_pins(struct pinctrl_dev *pctldev,
+				const char *pin_group, const unsigned **pins,
+				unsigned *num_pins);
 
 #ifdef CONFIG_OF
 extern struct pinctrl_dev *of_pinctrl_get(struct device_node *np);
diff --git a/include/linux/platform_data/pinctrl-adi2.h b/include/linux/platform_data/pinctrl-adi2.h
new file mode 100644
index 0000000..8f91300
--- /dev/null
+++ b/include/linux/platform_data/pinctrl-adi2.h
@@ -0,0 +1,40 @@
+/*
+ * Pinctrl Driver for ADI GPIO2 controller
+ *
+ * Copyright 2007-2013 Analog Devices Inc.
+ *
+ * Licensed under the GPLv2 or later
+ */
+
+
+#ifndef PINCTRL_ADI2_H
+#define PINCTRL_ADI2_H
+
+#include <linux/io.h>
+#include <linux/platform_device.h>
+
+/**
+ * struct adi_pinctrl_gpio_platform_data - Pinctrl gpio platform data
+ * for ADI GPIO2 device.
+ *
+ * @port_gpio_base: Optional global GPIO index of the GPIO bank.
+ *                 0 means driver decides.
+ * @port_pin_base: Pin index of the pin controller device.
+ * @port_width: PIN number of the GPIO bank device
+ * @pint_id: GPIO PINT device id that this GPIO bank should map to.
+ * @pint_assign: The 32-bit GPIO PINT registers can be divided into 2 parts. A
+ *               GPIO bank can be mapped into either low 16 bits[0] or high 16
+ *               bits[1] of each PINT register.
+ * @pint_map: GIOP bank mapping code in PINT device
+ */
+struct adi_pinctrl_gpio_platform_data {
+	unsigned int port_gpio_base;
+	unsigned int port_pin_base;
+	unsigned int port_width;
+	u8 pinctrl_id;
+	u8 pint_id;
+	bool pint_assign;
+	u8 pint_map;
+};
+
+#endif