Merge branch 'for-3.18-consistent-ops' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu

Pull percpu consistent-ops changes from Tejun Heo:
 "Way back, before the current percpu allocator was implemented, static
  and dynamic percpu memory areas were allocated and handled separately
  and had their own accessors.  The distinction has been gone for many
  years now; however, the now duplicate two sets of accessors remained
  with the pointer based ones - this_cpu_*() - evolving various other
  operations over time.  During the process, we also accumulated other
  inconsistent operations.

  This pull request contains Christoph's patches to clean up the
  duplicate accessor situation.  __get_cpu_var() uses are replaced with
  with this_cpu_ptr() and __this_cpu_ptr() with raw_cpu_ptr().

  Unfortunately, the former sometimes is tricky thanks to C being a bit
  messy with the distinction between lvalues and pointers, which led to
  a rather ugly solution for cpumask_var_t involving the introduction of
  this_cpu_cpumask_var_ptr().

  This converts most of the uses but not all.  Christoph will follow up
  with the remaining conversions in this merge window and hopefully
  remove the obsolete accessors"

* 'for-3.18-consistent-ops' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/percpu: (38 commits)
  irqchip: Properly fetch the per cpu offset
  percpu: Resolve ambiguities in __get_cpu_var/cpumask_var_t -fix
  ia64: sn_nodepda cannot be assigned to after this_cpu conversion. Use __this_cpu_write.
  percpu: Resolve ambiguities in __get_cpu_var/cpumask_var_t
  Revert "powerpc: Replace __get_cpu_var uses"
  percpu: Remove __this_cpu_ptr
  clocksource: Replace __this_cpu_ptr with raw_cpu_ptr
  sparc: Replace __get_cpu_var uses
  avr32: Replace __get_cpu_var with __this_cpu_write
  blackfin: Replace __get_cpu_var uses
  tile: Use this_cpu_ptr() for hardware counters
  tile: Replace __get_cpu_var uses
  powerpc: Replace __get_cpu_var uses
  alpha: Replace __get_cpu_var
  ia64: Replace __get_cpu_var uses
  s390: cio driver &__get_cpu_var replacements
  s390: Replace __get_cpu_var uses
  mips: Replace __get_cpu_var uses
  MIPS: Replace __get_cpu_var uses in FPU emulator.
  arm: Replace __this_cpu_ptr with raw_cpu_ptr
  ...

1 files changed, 11 insertions, 11 deletions

diff --git a/kernel/time/hrtimer.c b/kernel/time/hrtimer.c
index ab370ff..37e50aa 100644
--- a/kernel/time/hrtimer.c
+++ b/kernel/time/hrtimer.c
@@ -558,7 +558,7 @@ hrtimer_force_reprogram(struct hrtimer_cpu_base *cpu_base, int skip_equal)
 static int hrtimer_reprogram(struct hrtimer *timer,
 			     struct hrtimer_clock_base *base)
 {
-	struct hrtimer_cpu_base *cpu_base = &__get_cpu_var(hrtimer_bases);
+	struct hrtimer_cpu_base *cpu_base = this_cpu_ptr(&hrtimer_bases);
 	ktime_t expires = ktime_sub(hrtimer_get_expires(timer), base->offset);
 	int res;
 
@@ -629,7 +629,7 @@ static inline ktime_t hrtimer_update_base(struct hrtimer_cpu_base *base)
  */
 static void retrigger_next_event(void *arg)
 {
-	struct hrtimer_cpu_base *base = &__get_cpu_var(hrtimer_bases);
+	struct hrtimer_cpu_base *base = this_cpu_ptr(&hrtimer_bases);
 
 	if (!hrtimer_hres_active())
 		return;
@@ -903,7 +903,7 @@ remove_hrtimer(struct hrtimer *timer, struct hrtimer_clock_base *base)
 		 */
 		debug_deactivate(timer);
 		timer_stats_hrtimer_clear_start_info(timer);
-		reprogram = base->cpu_base == &__get_cpu_var(hrtimer_bases);
+		reprogram = base->cpu_base == this_cpu_ptr(&hrtimer_bases);
 		/*
 		 * We must preserve the CALLBACK state flag here,
 		 * otherwise we could move the timer base in
@@ -963,7 +963,7 @@ int __hrtimer_start_range_ns(struct hrtimer *timer, ktime_t tim,
 		 * on dynticks target.
 		 */
 		wake_up_nohz_cpu(new_base->cpu_base->cpu);
-	} else if (new_base->cpu_base == &__get_cpu_var(hrtimer_bases) &&
+	} else if (new_base->cpu_base == this_cpu_ptr(&hrtimer_bases) &&
 			hrtimer_reprogram(timer, new_base)) {
 		/*
 		 * Only allow reprogramming if the new base is on this CPU.
@@ -1103,7 +1103,7 @@ EXPORT_SYMBOL_GPL(hrtimer_get_remaining);
  */
 ktime_t hrtimer_get_next_event(void)
 {
-	struct hrtimer_cpu_base *cpu_base = &__get_cpu_var(hrtimer_bases);
+	struct hrtimer_cpu_base *cpu_base = this_cpu_ptr(&hrtimer_bases);
 	struct hrtimer_clock_base *base = cpu_base->clock_base;
 	ktime_t delta, mindelta = { .tv64 = KTIME_MAX };
 	unsigned long flags;
@@ -1144,7 +1144,7 @@ static void __hrtimer_init(struct hrtimer *timer, clockid_t clock_id,
 
 	memset(timer, 0, sizeof(struct hrtimer));
 
-	cpu_base = &__raw_get_cpu_var(hrtimer_bases);
+	cpu_base = raw_cpu_ptr(&hrtimer_bases);
 
 	if (clock_id == CLOCK_REALTIME && mode != HRTIMER_MODE_ABS)
 		clock_id = CLOCK_MONOTONIC;
@@ -1187,7 +1187,7 @@ int hrtimer_get_res(const clockid_t which_clock, struct timespec *tp)
 	struct hrtimer_cpu_base *cpu_base;
 	int base = hrtimer_clockid_to_base(which_clock);
 
-	cpu_base = &__raw_get_cpu_var(hrtimer_bases);
+	cpu_base = raw_cpu_ptr(&hrtimer_bases);
 	*tp = ktime_to_timespec(cpu_base->clock_base[base].resolution);
 
 	return 0;
@@ -1242,7 +1242,7 @@ static void __run_hrtimer(struct hrtimer *timer, ktime_t *now)
  */
 void hrtimer_interrupt(struct clock_event_device *dev)
 {
-	struct hrtimer_cpu_base *cpu_base = &__get_cpu_var(hrtimer_bases);
+	struct hrtimer_cpu_base *cpu_base = this_cpu_ptr(&hrtimer_bases);
 	ktime_t expires_next, now, entry_time, delta;
 	int i, retries = 0;
 
@@ -1376,7 +1376,7 @@ static void __hrtimer_peek_ahead_timers(void)
 	if (!hrtimer_hres_active())
 		return;
 
-	td = &__get_cpu_var(tick_cpu_device);
+	td = this_cpu_ptr(&tick_cpu_device);
 	if (td && td->evtdev)
 		hrtimer_interrupt(td->evtdev);
 }
@@ -1440,7 +1440,7 @@ void hrtimer_run_pending(void)
 void hrtimer_run_queues(void)
 {
 	struct timerqueue_node *node;
-	struct hrtimer_cpu_base *cpu_base = &__get_cpu_var(hrtimer_bases);
+	struct hrtimer_cpu_base *cpu_base = this_cpu_ptr(&hrtimer_bases);
 	struct hrtimer_clock_base *base;
 	int index, gettime = 1;
 
@@ -1679,7 +1679,7 @@ static void migrate_hrtimers(int scpu)
 
 	local_irq_disable();
 	old_base = &per_cpu(hrtimer_bases, scpu);
-	new_base = &__get_cpu_var(hrtimer_bases);
+	new_base = this_cpu_ptr(&hrtimer_bases);
 	/*
 	 * The caller is globally serialized and nobody else
 	 * takes two locks at once, deadlock is not possible.