fs: kill BDI_CAP_SWAP_BACKED

This bdi flag isn't too useful - we can determine that a vma is backed by
either swap or shmem trivially in the caller.

This also allows removing the backing_dev_info instaces for swap and shmem
in favor of noop_backing_dev_info.

Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Tejun Heo <tj@kernel.org>
Reviewed-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>

4 files changed, 18 insertions, 33 deletions

diff --git a/mm/madvise.c b/mm/madvise.c
index a271adc..1383a89 100644
--- a/mm/madvise.c
+++ b/mm/madvise.c
@@ -222,19 +222,22 @@ static long madvise_willneed(struct vm_area_struct *vma,
 	struct file *file = vma->vm_file;
 
 #ifdef CONFIG_SWAP
-	if (!file || mapping_cap_swap_backed(file->f_mapping)) {
+	if (!file) {
 		*prev = vma;
-		if (!file)
-			force_swapin_readahead(vma, start, end);
-		else
-			force_shm_swapin_readahead(vma, start, end,
-						file->f_mapping);
+		force_swapin_readahead(vma, start, end);
 		return 0;
 	}
-#endif
 
+	if (shmem_mapping(file->f_mapping)) {
+		*prev = vma;
+		force_shm_swapin_readahead(vma, start, end,
+					file->f_mapping);
+		return 0;
+	}
+#else
 	if (!file)
 		return -EBADF;
+#endif
 
 	if (file->f_mapping->a_ops->get_xip_mem) {
 		/* no bad return value, but ignore advice */
diff --git a/mm/shmem.c b/mm/shmem.c
index 73ba1df..1b77eaf 100644
--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -191,11 +191,6 @@ static const struct inode_operations shmem_dir_inode_operations;
 static const struct inode_operations shmem_special_inode_operations;
 static const struct vm_operations_struct shmem_vm_ops;
 
-static struct backing_dev_info shmem_backing_dev_info  __read_mostly = {
-	.ra_pages	= 0,	/* No readahead */
-	.capabilities	= BDI_CAP_NO_ACCT_AND_WRITEBACK | BDI_CAP_SWAP_BACKED,
-};
-
 static LIST_HEAD(shmem_swaplist);
 static DEFINE_MUTEX(shmem_swaplist_mutex);
 
@@ -765,11 +760,11 @@ static int shmem_writepage(struct page *page, struct writeback_control *wbc)
 		goto redirty;
 
 	/*
-	 * shmem_backing_dev_info's capabilities prevent regular writeback or
-	 * sync from ever calling shmem_writepage; but a stacking filesystem
-	 * might use ->writepage of its underlying filesystem, in which case
-	 * tmpfs should write out to swap only in response to memory pressure,
-	 * and not for the writeback threads or sync.
+	 * Our capabilities prevent regular writeback or sync from ever calling
+	 * shmem_writepage; but a stacking filesystem might use ->writepage of
+	 * its underlying filesystem, in which case tmpfs should write out to
+	 * swap only in response to memory pressure, and not for the writeback
+	 * threads or sync.
 	 */
 	if (!wbc->for_reclaim) {
 		WARN_ON_ONCE(1);	/* Still happens? Tell us about it! */
@@ -1415,7 +1410,7 @@ static struct inode *shmem_get_inode(struct super_block *sb, const struct inode
 		inode->i_ino = get_next_ino();
 		inode_init_owner(inode, dir, mode);
 		inode->i_blocks = 0;
-		inode->i_mapping->backing_dev_info = &shmem_backing_dev_info;
+		inode->i_mapping->backing_dev_info = &noop_backing_dev_info;
 		inode->i_atime = inode->i_mtime = inode->i_ctime = CURRENT_TIME;
 		inode->i_generation = get_seconds();
 		info = SHMEM_I(inode);
@@ -1461,7 +1456,7 @@ static struct inode *shmem_get_inode(struct super_block *sb, const struct inode
 
 bool shmem_mapping(struct address_space *mapping)
 {
-	return mapping->backing_dev_info == &shmem_backing_dev_info;
+	return mapping->host->i_sb->s_op == &shmem_ops;
 }
 
 #ifdef CONFIG_TMPFS
@@ -3226,10 +3221,6 @@ int __init shmem_init(void)
 	if (shmem_inode_cachep)
 		return 0;
 
-	error = bdi_init(&shmem_backing_dev_info);
-	if (error)
-		goto out4;
-
 	error = shmem_init_inodecache();
 	if (error)
 		goto out3;
@@ -3253,8 +3244,6 @@ out1:
 out2:
 	shmem_destroy_inodecache();
 out3:
-	bdi_destroy(&shmem_backing_dev_info);
-out4:
 	shm_mnt = ERR_PTR(error);
 	return error;
 }
diff --git a/mm/swap.c b/mm/swap.c
index 8a12b33..4e0109a 100644
--- a/mm/swap.c
+++ b/mm/swap.c
@@ -1138,8 +1138,6 @@ void __init swap_setup(void)
 #ifdef CONFIG_SWAP
 	int i;
 
-	if (bdi_init(swapper_spaces[0].backing_dev_info))
-		panic("Failed to init swap bdi");
 	for (i = 0; i < MAX_SWAPFILES; i++) {
 		spin_lock_init(&swapper_spaces[i].tree_lock);
 		INIT_LIST_HEAD(&swapper_spaces[i].i_mmap_nonlinear);
diff --git a/mm/swap_state.c b/mm/swap_state.c
index 9711342..1c137b6 100644
--- a/mm/swap_state.c
+++ b/mm/swap_state.c
@@ -32,17 +32,12 @@ static const struct address_space_operations swap_aops = {
 #endif
 };
 
-static struct backing_dev_info swap_backing_dev_info = {
-	.name		= "swap",
-	.capabilities	= BDI_CAP_NO_ACCT_AND_WRITEBACK | BDI_CAP_SWAP_BACKED,
-};
-
 struct address_space swapper_spaces[MAX_SWAPFILES] = {
 	[0 ... MAX_SWAPFILES - 1] = {
 		.page_tree	= RADIX_TREE_INIT(GFP_ATOMIC|__GFP_NOWARN),
 		.i_mmap_writable = ATOMIC_INIT(0),
 		.a_ops		= &swap_aops,
-		.backing_dev_info = &swap_backing_dev_info,
+		.backing_dev_info = &noop_backing_dev_info,
 	}
 };