Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

Pull networking updates from David Miller:
 "Another merge window, another set of networking changes.  I've heard
  rumblings that the lightweight tunnels infrastructure has been voted
  networking change of the year.  But what do I know?

   1) Add conntrack support to openvswitch, from Joe Stringer.

   2) Initial support for VRF (Virtual Routing and Forwarding), which
      allows the segmentation of routing paths without using multiple
      devices.  There are some semantic kinks to work out still, but
      this is a reasonably strong foundation.  From David Ahern.

   3) Remove spinlock fro act_bpf fast path, from Alexei Starovoitov.

   4) Ignore route nexthops with a link down state in ipv6, just like
      ipv4.  From Andy Gospodarek.

   5) Remove spinlock from fast path of act_gact and act_mirred, from
      Eric Dumazet.

   6) Document the DSA layer, from Florian Fainelli.

   7) Add netconsole support to bcmgenet, systemport, and DSA.  Also
      from Florian Fainelli.

   8) Add Mellanox Switch Driver and core infrastructure, from Jiri
      Pirko.

   9) Add support for "light weight tunnels", which allow for
      encapsulation and decapsulation without bearing the overhead of a
      full blown netdevice.  From Thomas Graf, Jiri Benc, and a cast of
      others.

  10) Add Identifier Locator Addressing support for ipv6, from Tom
      Herbert.

  11) Support fragmented SKBs in iwlwifi, from Johannes Berg.

  12) Allow perf PMUs to be accessed from eBPF programs, from Kaixu Xia.

  13) Add BQL support to 3c59x driver, from Loganaden Velvindron.

  14) Stop using a zero TX queue length to mean that a device shouldn't
      have a qdisc attached, use an explicit flag instead.  From Phil
      Sutter.

  15) Use generic geneve netdevice infrastructure in openvswitch, from
      Pravin B Shelar.

  16) Add infrastructure to avoid re-forwarding a packet in software
      that was already forwarded by a hardware switch.  From Scott
      Feldman.

  17) Allow AF_PACKET fanout function to be implemented in a bpf
      program, from Willem de Bruijn"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1458 commits)
  netfilter: nf_conntrack: make nf_ct_zone_dflt built-in
  netfilter: nf_dup{4, 6}: fix build error when nf_conntrack disabled
  net: fec: clear receive interrupts before processing a packet
  ipv6: fix exthdrs offload registration in out_rt path
  xen-netback: add support for multicast control
  bgmac: Update fixed_phy_register()
  sock, diag: fix panic in sock_diag_put_filterinfo
  flow_dissector: Use 'const' where possible.
  flow_dissector: Fix function argument ordering dependency
  ixgbe: Resolve "initialized field overwritten" warnings
  ixgbe: Remove bimodal SR-IOV disabling
  ixgbe: Add support for reporting 2.5G link speed
  ixgbe: fix bounds checking in ixgbe_setup_tc for 82598
  ixgbe: support for ethtool set_rxfh
  ixgbe: Avoid needless PHY access on copper phys
  ixgbe: cleanup to use cached mask value
  ixgbe: Remove second instance of lan_id variable
  ixgbe: use kzalloc for allocating one thing
  flow: Move __get_hash_from_flowi{4,6} into flow_dissector.c
  ixgbe: Remove unused PCI bus types
  ...

1 files changed, 180 insertions, 146 deletions

diff --git a/net/mac80211/mesh_plink.c b/net/mac80211/mesh_plink.c
index 3b59099..5838464 100644
--- a/net/mac80211/mesh_plink.c
+++ b/net/mac80211/mesh_plink.c
@@ -13,10 +13,11 @@
 #include "rate.h"
 #include "mesh.h"
 
+#define PLINK_CNF_AID(mgmt) ((mgmt)->u.action.u.self_prot.variable + 2)
 #define PLINK_GET_LLID(p) (p + 2)
 #define PLINK_GET_PLID(p) (p + 4)
 
-#define mod_plink_timer(s, t) (mod_timer(&s->plink_timer, \
+#define mod_plink_timer(s, t) (mod_timer(&s->mesh->plink_timer, \
 				jiffies + msecs_to_jiffies(t)))
 
 enum plink_event {
@@ -53,18 +54,13 @@ static const char * const mplevents[] = {
 	[CLS_IGNR] = "CLS_IGNR"
 };
 
-static int mesh_plink_frame_tx(struct ieee80211_sub_if_data *sdata,
-			       enum ieee80211_self_protected_actioncode action,
-			       u8 *da, u16 llid, u16 plid, u16 reason);
-
-
 /* We only need a valid sta if user configured a minimum rssi_threshold. */
 static bool rssi_threshold_check(struct ieee80211_sub_if_data *sdata,
 				 struct sta_info *sta)
 {
 	s32 rssi_threshold = sdata->u.mesh.mshcfg.rssi_threshold;
 	return rssi_threshold == 0 ||
-	       (sta && (s8) -ewma_read(&sta->avg_signal) > rssi_threshold);
+	       (sta && (s8) -ewma_signal_read(&sta->avg_signal) > rssi_threshold);
 }
 
 /**
@@ -72,14 +68,14 @@ static bool rssi_threshold_check(struct ieee80211_sub_if_data *sdata,
  *
  * @sta: mesh peer link to restart
  *
- * Locking: this function must be called holding sta->plink_lock
+ * Locking: this function must be called holding sta->mesh->plink_lock
  */
 static inline void mesh_plink_fsm_restart(struct sta_info *sta)
 {
-	lockdep_assert_held(&sta->plink_lock);
-	sta->plink_state = NL80211_PLINK_LISTEN;
-	sta->llid = sta->plid = sta->reason = 0;
-	sta->plink_retries = 0;
+	lockdep_assert_held(&sta->mesh->plink_lock);
+	sta->mesh->plink_state = NL80211_PLINK_LISTEN;
+	sta->mesh->llid = sta->mesh->plid = sta->mesh->reason = 0;
+	sta->mesh->plink_retries = 0;
 }
 
 /*
@@ -119,7 +115,7 @@ static u32 mesh_set_short_slot_time(struct ieee80211_sub_if_data *sdata)
 	rcu_read_lock();
 	list_for_each_entry_rcu(sta, &local->sta_list, list) {
 		if (sdata != sta->sdata ||
-		    sta->plink_state != NL80211_PLINK_ESTAB)
+		    sta->mesh->plink_state != NL80211_PLINK_ESTAB)
 			continue;
 
 		short_slot = false;
@@ -169,7 +165,7 @@ static u32 mesh_set_ht_prot_mode(struct ieee80211_sub_if_data *sdata)
 	rcu_read_lock();
 	list_for_each_entry_rcu(sta, &local->sta_list, list) {
 		if (sdata != sta->sdata ||
-		    sta->plink_state != NL80211_PLINK_ESTAB)
+		    sta->mesh->plink_state != NL80211_PLINK_ESTAB)
 			continue;
 
 		if (sta->sta.bandwidth > IEEE80211_STA_RX_BW_20)
@@ -204,59 +200,8 @@ static u32 mesh_set_ht_prot_mode(struct ieee80211_sub_if_data *sdata)
 	return BSS_CHANGED_HT;
 }
 
-/**
- * __mesh_plink_deactivate - deactivate mesh peer link
- *
- * @sta: mesh peer link to deactivate
- *
- * All mesh paths with this peer as next hop will be flushed
- * Returns beacon changed flag if the beacon content changed.
- *
- * Locking: the caller must hold sta->plink_lock
- */
-static u32 __mesh_plink_deactivate(struct sta_info *sta)
-{
-	struct ieee80211_sub_if_data *sdata = sta->sdata;
-	u32 changed = 0;
-
-	lockdep_assert_held(&sta->plink_lock);
-
-	if (sta->plink_state == NL80211_PLINK_ESTAB)
-		changed = mesh_plink_dec_estab_count(sdata);
-	sta->plink_state = NL80211_PLINK_BLOCKED;
-	mesh_path_flush_by_nexthop(sta);
-
-	ieee80211_mps_sta_status_update(sta);
-	changed |= ieee80211_mps_set_sta_local_pm(sta,
-			NL80211_MESH_POWER_UNKNOWN);
-
-	return changed;
-}
-
-/**
- * mesh_plink_deactivate - deactivate mesh peer link
- *
- * @sta: mesh peer link to deactivate
- *
- * All mesh paths with this peer as next hop will be flushed
- */
-u32 mesh_plink_deactivate(struct sta_info *sta)
-{
-	struct ieee80211_sub_if_data *sdata = sta->sdata;
-	u32 changed;
-
-	spin_lock_bh(&sta->plink_lock);
-	changed = __mesh_plink_deactivate(sta);
-	sta->reason = WLAN_REASON_MESH_PEER_CANCELED;
-	mesh_plink_frame_tx(sdata, WLAN_SP_MESH_PEERING_CLOSE,
-			    sta->sta.addr, sta->llid, sta->plid,
-			    sta->reason);
-	spin_unlock_bh(&sta->plink_lock);
-
-	return changed;
-}
-
 static int mesh_plink_frame_tx(struct ieee80211_sub_if_data *sdata,
+			       struct sta_info *sta,
 			       enum ieee80211_self_protected_actioncode action,
 			       u8 *da, u16 llid, u16 plid, u16 reason)
 {
@@ -306,7 +251,7 @@ static int mesh_plink_frame_tx(struct ieee80211_sub_if_data *sdata,
 		if (action == WLAN_SP_MESH_PEERING_CONFIRM) {
 			/* AID */
 			pos = skb_put(skb, 2);
-			put_unaligned_le16(plid, pos);
+			put_unaligned_le16(sta->sta.aid, pos);
 		}
 		if (ieee80211_add_srates_ie(sdata, skb, true, band) ||
 		    ieee80211_add_ext_srates_ie(sdata, skb, true, band) ||
@@ -375,6 +320,58 @@ free:
 	return err;
 }
 
+/**
+ * __mesh_plink_deactivate - deactivate mesh peer link
+ *
+ * @sta: mesh peer link to deactivate
+ *
+ * All mesh paths with this peer as next hop will be flushed
+ * Returns beacon changed flag if the beacon content changed.
+ *
+ * Locking: the caller must hold sta->mesh->plink_lock
+ */
+static u32 __mesh_plink_deactivate(struct sta_info *sta)
+{
+	struct ieee80211_sub_if_data *sdata = sta->sdata;
+	u32 changed = 0;
+
+	lockdep_assert_held(&sta->mesh->plink_lock);
+
+	if (sta->mesh->plink_state == NL80211_PLINK_ESTAB)
+		changed = mesh_plink_dec_estab_count(sdata);
+	sta->mesh->plink_state = NL80211_PLINK_BLOCKED;
+	mesh_path_flush_by_nexthop(sta);
+
+	ieee80211_mps_sta_status_update(sta);
+	changed |= ieee80211_mps_set_sta_local_pm(sta,
+			NL80211_MESH_POWER_UNKNOWN);
+
+	return changed;
+}
+
+/**
+ * mesh_plink_deactivate - deactivate mesh peer link
+ *
+ * @sta: mesh peer link to deactivate
+ *
+ * All mesh paths with this peer as next hop will be flushed
+ */
+u32 mesh_plink_deactivate(struct sta_info *sta)
+{
+	struct ieee80211_sub_if_data *sdata = sta->sdata;
+	u32 changed;
+
+	spin_lock_bh(&sta->mesh->plink_lock);
+	changed = __mesh_plink_deactivate(sta);
+	sta->mesh->reason = WLAN_REASON_MESH_PEER_CANCELED;
+	mesh_plink_frame_tx(sdata, sta, WLAN_SP_MESH_PEERING_CLOSE,
+			    sta->sta.addr, sta->mesh->llid, sta->mesh->plid,
+			    sta->mesh->reason);
+	spin_unlock_bh(&sta->mesh->plink_lock);
+
+	return changed;
+}
+
 static void mesh_sta_info_init(struct ieee80211_sub_if_data *sdata,
 			       struct sta_info *sta,
 			       struct ieee802_11_elems *elems, bool insert)
@@ -388,13 +385,14 @@ static void mesh_sta_info_init(struct ieee80211_sub_if_data *sdata,
 	sband = local->hw.wiphy->bands[band];
 	rates = ieee80211_sta_get_rates(sdata, elems, band, &basic_rates);
 
-	spin_lock_bh(&sta->plink_lock);
+	spin_lock_bh(&sta->mesh->plink_lock);
 	sta->last_rx = jiffies;
 
 	/* rates and capabilities don't change during peering */
-	if (sta->plink_state == NL80211_PLINK_ESTAB && sta->processed_beacon)
+	if (sta->mesh->plink_state == NL80211_PLINK_ESTAB &&
+	    sta->mesh->processed_beacon)
 		goto out;
-	sta->processed_beacon = true;
+	sta->mesh->processed_beacon = true;
 
 	if (sta->sta.supp_rates[band] != rates)
 		changed |= IEEE80211_RC_SUPP_RATES_CHANGED;
@@ -421,23 +419,57 @@ static void mesh_sta_info_init(struct ieee80211_sub_if_data *sdata,
 	else
 		rate_control_rate_update(local, sband, sta, changed);
 out:
-	spin_unlock_bh(&sta->plink_lock);
+	spin_unlock_bh(&sta->mesh->plink_lock);
+}
+
+static int mesh_allocate_aid(struct ieee80211_sub_if_data *sdata)
+{
+	struct sta_info *sta;
+	unsigned long *aid_map;
+	int aid;
+
+	aid_map = kcalloc(BITS_TO_LONGS(IEEE80211_MAX_AID + 1),
+			  sizeof(*aid_map), GFP_KERNEL);
+	if (!aid_map)
+		return -ENOMEM;
+
+	/* reserve aid 0 for mcast indication */
+	__set_bit(0, aid_map);
+
+	rcu_read_lock();
+	list_for_each_entry_rcu(sta, &sdata->local->sta_list, list)
+		__set_bit(sta->sta.aid, aid_map);
+	rcu_read_unlock();
+
+	aid = find_first_zero_bit(aid_map, IEEE80211_MAX_AID + 1);
+	kfree(aid_map);
+
+	if (aid > IEEE80211_MAX_AID)
+		return -ENOBUFS;
+
+	return aid;
 }
 
 static struct sta_info *
 __mesh_sta_info_alloc(struct ieee80211_sub_if_data *sdata, u8 *hw_addr)
 {
 	struct sta_info *sta;
+	int aid;
 
 	if (sdata->local->num_sta >= MESH_MAX_PLINKS)
 		return NULL;
 
+	aid = mesh_allocate_aid(sdata);
+	if (aid < 0)
+		return NULL;
+
 	sta = sta_info_alloc(sdata, hw_addr, GFP_KERNEL);
 	if (!sta)
 		return NULL;
 
-	sta->plink_state = NL80211_PLINK_LISTEN;
+	sta->mesh->plink_state = NL80211_PLINK_LISTEN;
 	sta->sta.wme = true;
+	sta->sta.aid = aid;
 
 	sta_info_pre_move_state(sta, IEEE80211_STA_AUTH);
 	sta_info_pre_move_state(sta, IEEE80211_STA_ASSOC);
@@ -524,7 +556,7 @@ void mesh_neighbour_update(struct ieee80211_sub_if_data *sdata,
 		goto out;
 
 	if (mesh_peer_accepts_plinks(elems) &&
-	    sta->plink_state == NL80211_PLINK_LISTEN &&
+	    sta->mesh->plink_state == NL80211_PLINK_LISTEN &&
 	    sdata->u.mesh.accepting_plinks &&
 	    sdata->u.mesh.mshcfg.auto_open_plinks &&
 	    rssi_threshold_check(sdata, sta))
@@ -554,52 +586,52 @@ static void mesh_plink_timer(unsigned long data)
 	if (sta->sdata->local->quiescing)
 		return;
 
-	spin_lock_bh(&sta->plink_lock);
+	spin_lock_bh(&sta->mesh->plink_lock);
 
 	/* If a timer fires just before a state transition on another CPU,
 	 * we may have already extended the timeout and changed state by the
 	 * time we've acquired the lock and arrived  here.  In that case,
 	 * skip this timer and wait for the new one.
 	 */
-	if (time_before(jiffies, sta->plink_timer.expires)) {
+	if (time_before(jiffies, sta->mesh->plink_timer.expires)) {
 		mpl_dbg(sta->sdata,
 			"Ignoring timer for %pM in state %s (timer adjusted)",
-			sta->sta.addr, mplstates[sta->plink_state]);
-		spin_unlock_bh(&sta->plink_lock);
+			sta->sta.addr, mplstates[sta->mesh->plink_state]);
+		spin_unlock_bh(&sta->mesh->plink_lock);
 		return;
 	}
 
 	/* del_timer() and handler may race when entering these states */
-	if (sta->plink_state == NL80211_PLINK_LISTEN ||
-	    sta->plink_state == NL80211_PLINK_ESTAB) {
+	if (sta->mesh->plink_state == NL80211_PLINK_LISTEN ||
+	    sta->mesh->plink_state == NL80211_PLINK_ESTAB) {
 		mpl_dbg(sta->sdata,
 			"Ignoring timer for %pM in state %s (timer deleted)",
-			sta->sta.addr, mplstates[sta->plink_state]);
-		spin_unlock_bh(&sta->plink_lock);
+			sta->sta.addr, mplstates[sta->mesh->plink_state]);
+		spin_unlock_bh(&sta->mesh->plink_lock);
 		return;
 	}
 
 	mpl_dbg(sta->sdata,
 		"Mesh plink timer for %pM fired on state %s\n",
-		sta->sta.addr, mplstates[sta->plink_state]);
+		sta->sta.addr, mplstates[sta->mesh->plink_state]);
 	sdata = sta->sdata;
 	mshcfg = &sdata->u.mesh.mshcfg;
 
-	switch (sta->plink_state) {
+	switch (sta->mesh->plink_state) {
 	case NL80211_PLINK_OPN_RCVD:
 	case NL80211_PLINK_OPN_SNT:
 		/* retry timer */
-		if (sta->plink_retries < mshcfg->dot11MeshMaxRetries) {
+		if (sta->mesh->plink_retries < mshcfg->dot11MeshMaxRetries) {
 			u32 rand;
 			mpl_dbg(sta->sdata,
 				"Mesh plink for %pM (retry, timeout): %d %d\n",
-				sta->sta.addr, sta->plink_retries,
-				sta->plink_timeout);
+				sta->sta.addr, sta->mesh->plink_retries,
+				sta->mesh->plink_timeout);
 			get_random_bytes(&rand, sizeof(u32));
-			sta->plink_timeout = sta->plink_timeout +
-					     rand % sta->plink_timeout;
-			++sta->plink_retries;
-			mod_plink_timer(sta, sta->plink_timeout);
+			sta->mesh->plink_timeout = sta->mesh->plink_timeout +
+					     rand % sta->mesh->plink_timeout;
+			++sta->mesh->plink_retries;
+			mod_plink_timer(sta, sta->mesh->plink_timeout);
 			action = WLAN_SP_MESH_PEERING_OPEN;
 			break;
 		}
@@ -609,31 +641,31 @@ static void mesh_plink_timer(unsigned long data)
 		/* confirm timer */
 		if (!reason)
 			reason = WLAN_REASON_MESH_CONFIRM_TIMEOUT;
-		sta->plink_state = NL80211_PLINK_HOLDING;
+		sta->mesh->plink_state = NL80211_PLINK_HOLDING;
 		mod_plink_timer(sta, mshcfg->dot11MeshHoldingTimeout);
 		action = WLAN_SP_MESH_PEERING_CLOSE;
 		break;
 	case NL80211_PLINK_HOLDING:
 		/* holding timer */
-		del_timer(&sta->plink_timer);
+		del_timer(&sta->mesh->plink_timer);
 		mesh_plink_fsm_restart(sta);
 		break;
 	default:
 		break;
 	}
-	spin_unlock_bh(&sta->plink_lock);
+	spin_unlock_bh(&sta->mesh->plink_lock);
 	if (action)
-		mesh_plink_frame_tx(sdata, action, sta->sta.addr,
-				    sta->llid, sta->plid, reason);
+		mesh_plink_frame_tx(sdata, sta, action, sta->sta.addr,
+				    sta->mesh->llid, sta->mesh->plid, reason);
 }
 
 static inline void mesh_plink_timer_set(struct sta_info *sta, u32 timeout)
 {
-	sta->plink_timer.expires = jiffies + msecs_to_jiffies(timeout);
-	sta->plink_timer.data = (unsigned long) sta;
-	sta->plink_timer.function = mesh_plink_timer;
-	sta->plink_timeout = timeout;
-	add_timer(&sta->plink_timer);
+	sta->mesh->plink_timer.expires = jiffies + msecs_to_jiffies(timeout);
+	sta->mesh->plink_timer.data = (unsigned long) sta;
+	sta->mesh->plink_timer.function = mesh_plink_timer;
+	sta->mesh->plink_timeout = timeout;
+	add_timer(&sta->mesh->plink_timer);
 }
 
 static bool llid_in_use(struct ieee80211_sub_if_data *sdata,
@@ -645,7 +677,7 @@ static bool llid_in_use(struct ieee80211_sub_if_data *sdata,
 
 	rcu_read_lock();
 	list_for_each_entry_rcu(sta, &local->sta_list, list) {
-		if (!memcmp(&sta->llid, &llid, sizeof(llid))) {
+		if (!memcmp(&sta->mesh->llid, &llid, sizeof(llid))) {
 			in_use = true;
 			break;
 		}
@@ -661,8 +693,6 @@ static u16 mesh_get_new_llid(struct ieee80211_sub_if_data *sdata)
 
 	do {
 		get_random_bytes(&llid, sizeof(llid));
-		/* for mesh PS we still only have the AID range for TIM bits */
-		llid = (llid % IEEE80211_MAX_AID) + 1;
 	} while (llid_in_use(sdata, llid));
 
 	return llid;
@@ -676,16 +706,16 @@ u32 mesh_plink_open(struct sta_info *sta)
 	if (!test_sta_flag(sta, WLAN_STA_AUTH))
 		return 0;
 
-	spin_lock_bh(&sta->plink_lock);
-	sta->llid = mesh_get_new_llid(sdata);
-	if (sta->plink_state != NL80211_PLINK_LISTEN &&
-	    sta->plink_state != NL80211_PLINK_BLOCKED) {
-		spin_unlock_bh(&sta->plink_lock);
+	spin_lock_bh(&sta->mesh->plink_lock);
+	sta->mesh->llid = mesh_get_new_llid(sdata);
+	if (sta->mesh->plink_state != NL80211_PLINK_LISTEN &&
+	    sta->mesh->plink_state != NL80211_PLINK_BLOCKED) {
+		spin_unlock_bh(&sta->mesh->plink_lock);
 		return 0;
 	}
-	sta->plink_state = NL80211_PLINK_OPN_SNT;
+	sta->mesh->plink_state = NL80211_PLINK_OPN_SNT;
 	mesh_plink_timer_set(sta, sdata->u.mesh.mshcfg.dot11MeshRetryTimeout);
-	spin_unlock_bh(&sta->plink_lock);
+	spin_unlock_bh(&sta->mesh->plink_lock);
 	mpl_dbg(sdata,
 		"Mesh plink: starting establishment with %pM\n",
 		sta->sta.addr);
@@ -693,8 +723,8 @@ u32 mesh_plink_open(struct sta_info *sta)
 	/* set the non-peer mode to active during peering */
 	changed = ieee80211_mps_local_status_update(sdata);
 
-	mesh_plink_frame_tx(sdata, WLAN_SP_MESH_PEERING_OPEN,
-			    sta->sta.addr, sta->llid, 0, 0);
+	mesh_plink_frame_tx(sdata, sta, WLAN_SP_MESH_PEERING_OPEN,
+			    sta->sta.addr, sta->mesh->llid, 0, 0);
 	return changed;
 }
 
@@ -702,10 +732,10 @@ u32 mesh_plink_block(struct sta_info *sta)
 {
 	u32 changed;
 
-	spin_lock_bh(&sta->plink_lock);
+	spin_lock_bh(&sta->mesh->plink_lock);
 	changed = __mesh_plink_deactivate(sta);
-	sta->plink_state = NL80211_PLINK_BLOCKED;
-	spin_unlock_bh(&sta->plink_lock);
+	sta->mesh->plink_state = NL80211_PLINK_BLOCKED;
+	spin_unlock_bh(&sta->mesh->plink_lock);
 
 	return changed;
 }
@@ -715,12 +745,11 @@ static void mesh_plink_close(struct ieee80211_sub_if_data *sdata,
 			     enum plink_event event)
 {
 	struct mesh_config *mshcfg = &sdata->u.mesh.mshcfg;
-
 	u16 reason = (event == CLS_ACPT) ?
 		     WLAN_REASON_MESH_CLOSE : WLAN_REASON_MESH_CONFIG;
 
-	sta->reason = reason;
-	sta->plink_state = NL80211_PLINK_HOLDING;
+	sta->mesh->reason = reason;
+	sta->mesh->plink_state = NL80211_PLINK_HOLDING;
 	mod_plink_timer(sta, mshcfg->dot11MeshHoldingTimeout);
 }
 
@@ -730,8 +759,8 @@ static u32 mesh_plink_establish(struct ieee80211_sub_if_data *sdata,
 	struct mesh_config *mshcfg = &sdata->u.mesh.mshcfg;
 	u32 changed = 0;
 
-	del_timer(&sta->plink_timer);
-	sta->plink_state = NL80211_PLINK_ESTAB;
+	del_timer(&sta->mesh->plink_timer);
+	sta->mesh->plink_state = NL80211_PLINK_ESTAB;
 	changed |= mesh_plink_inc_estab_count(sdata);
 	changed |= mesh_set_ht_prot_mode(sdata);
 	changed |= mesh_set_short_slot_time(sdata);
@@ -758,18 +787,18 @@ static u32 mesh_plink_fsm(struct ieee80211_sub_if_data *sdata,
 	u32 changed = 0;
 
 	mpl_dbg(sdata, "peer %pM in state %s got event %s\n", sta->sta.addr,
-		mplstates[sta->plink_state], mplevents[event]);
+		mplstates[sta->mesh->plink_state], mplevents[event]);
 
-	spin_lock_bh(&sta->plink_lock);
-	switch (sta->plink_state) {
+	spin_lock_bh(&sta->mesh->plink_lock);
+	switch (sta->mesh->plink_state) {
 	case NL80211_PLINK_LISTEN:
 		switch (event) {
 		case CLS_ACPT:
 			mesh_plink_fsm_restart(sta);
 			break;
 		case OPN_ACPT:
-			sta->plink_state = NL80211_PLINK_OPN_RCVD;
-			sta->llid = mesh_get_new_llid(sdata);
+			sta->mesh->plink_state = NL80211_PLINK_OPN_RCVD;
+			sta->mesh->llid = mesh_get_new_llid(sdata);
 			mesh_plink_timer_set(sta,
 					     mshcfg->dot11MeshRetryTimeout);
 
@@ -791,11 +820,11 @@ static u32 mesh_plink_fsm(struct ieee80211_sub_if_data *sdata,
 			break;
 		case OPN_ACPT:
 			/* retry timer is left untouched */
-			sta->plink_state = NL80211_PLINK_OPN_RCVD;
+			sta->mesh->plink_state = NL80211_PLINK_OPN_RCVD;
 			action = WLAN_SP_MESH_PEERING_CONFIRM;
 			break;
 		case CNF_ACPT:
-			sta->plink_state = NL80211_PLINK_CNF_RCVD;
+			sta->mesh->plink_state = NL80211_PLINK_CNF_RCVD;
 			mod_plink_timer(sta, mshcfg->dot11MeshConfirmTimeout);
 			break;
 		default:
@@ -855,7 +884,7 @@ static u32 mesh_plink_fsm(struct ieee80211_sub_if_data *sdata,
 	case NL80211_PLINK_HOLDING:
 		switch (event) {
 		case CLS_ACPT:
-			del_timer(&sta->plink_timer);
+			del_timer(&sta->mesh->plink_timer);
 			mesh_plink_fsm_restart(sta);
 			break;
 		case OPN_ACPT:
@@ -874,17 +903,18 @@ static u32 mesh_plink_fsm(struct ieee80211_sub_if_data *sdata,
 		 */
 		break;
 	}
-	spin_unlock_bh(&sta->plink_lock);
+	spin_unlock_bh(&sta->mesh->plink_lock);
 	if (action) {
-		mesh_plink_frame_tx(sdata, action, sta->sta.addr,
-				    sta->llid, sta->plid, sta->reason);
+		mesh_plink_frame_tx(sdata, sta, action, sta->sta.addr,
+				    sta->mesh->llid, sta->mesh->plid,
+				    sta->mesh->reason);
 
 		/* also send confirm in open case */
 		if (action == WLAN_SP_MESH_PEERING_OPEN) {
-			mesh_plink_frame_tx(sdata,
+			mesh_plink_frame_tx(sdata, sta,
 					    WLAN_SP_MESH_PEERING_CONFIRM,
-					    sta->sta.addr, sta->llid,
-					    sta->plid, 0);
+					    sta->sta.addr, sta->mesh->llid,
+					    sta->mesh->plid, 0);
 		}
 	}
 
@@ -939,7 +969,7 @@ mesh_plink_get_event(struct ieee80211_sub_if_data *sdata,
 			mpl_dbg(sdata, "Mesh plink: Action frame from non-authed peer\n");
 			goto out;
 		}
-		if (sta->plink_state == NL80211_PLINK_BLOCKED)
+		if (sta->mesh->plink_state == NL80211_PLINK_BLOCKED)
 			goto out;
 	}
 
@@ -954,7 +984,7 @@ mesh_plink_get_event(struct ieee80211_sub_if_data *sdata,
 		if (!matches_local)
 			event = OPN_RJCT;
 		if (!mesh_plink_free_count(sdata) ||
-		    (sta->plid && sta->plid != plid))
+		    (sta->mesh->plid && sta->mesh->plid != plid))
 			event = OPN_IGNR;
 		else
 			event = OPN_ACPT;
@@ -963,14 +993,14 @@ mesh_plink_get_event(struct ieee80211_sub_if_data *sdata,
 		if (!matches_local)
 			event = CNF_RJCT;
 		if (!mesh_plink_free_count(sdata) ||
-		    sta->llid != llid ||
-		    (sta->plid && sta->plid != plid))
+		    sta->mesh->llid != llid ||
+		    (sta->mesh->plid && sta->mesh->plid != plid))
 			event = CNF_IGNR;
 		else
 			event = CNF_ACPT;
 		break;
 	case WLAN_SP_MESH_PEERING_CLOSE:
-		if (sta->plink_state == NL80211_PLINK_ESTAB)
+		if (sta->mesh->plink_state == NL80211_PLINK_ESTAB)
 			/* Do not check for llid or plid. This does not
 			 * follow the standard but since multiple plinks
 			 * per sta are not supported, it is necessary in
@@ -981,9 +1011,9 @@ mesh_plink_get_event(struct ieee80211_sub_if_data *sdata,
 			 * restarted.
 			 */
 			event = CLS_ACPT;
-		else if (sta->plid != plid)
+		else if (sta->mesh->plid != plid)
 			event = CLS_IGNR;
-		else if (ie_len == 8 && sta->llid != llid)
+		else if (ie_len == 8 && sta->mesh->llid != llid)
 			event = CLS_IGNR;
 		else
 			event = CLS_ACPT;
@@ -1070,9 +1100,9 @@ mesh_process_plink_frame(struct ieee80211_sub_if_data *sdata,
 			mpl_dbg(sdata, "Mesh plink: failed to init peer!\n");
 			goto unlock_rcu;
 		}
-		sta->plid = plid;
+		sta->mesh->plid = plid;
 	} else if (!sta && event == OPN_RJCT) {
-		mesh_plink_frame_tx(sdata, WLAN_SP_MESH_PEERING_CLOSE,
+		mesh_plink_frame_tx(sdata, NULL, WLAN_SP_MESH_PEERING_CLOSE,
 				    mgmt->sa, 0, plid,
 				    WLAN_REASON_MESH_CONFIG);
 		goto unlock_rcu;
@@ -1081,9 +1111,13 @@ mesh_process_plink_frame(struct ieee80211_sub_if_data *sdata,
 		goto unlock_rcu;
 	}
 
-	/* 802.11-2012 13.3.7.2 - update plid on CNF if not set */
-	if (!sta->plid && event == CNF_ACPT)
-		sta->plid = plid;
+	if (event == CNF_ACPT) {
+		/* 802.11-2012 13.3.7.2 - update plid on CNF if not set */
+		if (!sta->mesh->plid)
+			sta->mesh->plid = plid;
+
+		sta->mesh->aid = get_unaligned_le16(PLINK_CNF_AID(mgmt));
+	}
 
 	changed |= mesh_plink_fsm(sdata, sta, event);