Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (42 commits)
  tree-wide: fix misspelling of "definition" in comments
  reiserfs: fix misspelling of "journaled"
  doc: Fix a typo in slub.txt.
  inotify: remove superfluous return code check
  hdlc: spelling fix in find_pvc() comment
  doc: fix regulator docs cut-and-pasteism
  mtd: Fix comment in Kconfig
  doc: Fix IRQ chip docs
  tree-wide: fix assorted typos all over the place
  drivers/ata/libata-sff.c: comment spelling fixes
  fix typos/grammos in Documentation/edac.txt
  sysctl: add missing comments
  fs/debugfs/inode.c: fix comment typos
  sgivwfb: Make use of ARRAY_SIZE.
  sky2: fix sky2_link_down copy/paste comment error
  tree-wide: fix typos "couter" -> "counter"
  tree-wide: fix typos "offest" -> "offset"
  fix kerneldoc for set_irq_msi()
  spidev: fix double "of of" in comment
  comment typo fix: sybsystem -> subsystem
  ...

8 files changed, 13 insertions, 12 deletions

diff --git a/sound/pci/ca0106/ca0106_proc.c b/sound/pci/ca0106/ca0106_proc.c
index 15523e6..0470461 100644
--- a/sound/pci/ca0106/ca0106_proc.c
+++ b/sound/pci/ca0106/ca0106_proc.c
@@ -233,7 +233,7 @@ static void snd_ca0106_proc_dump_iec958( struct snd_info_buffer *buffer, u32 val
 			snd_iprintf(buffer, "user-defined\n");
 			break;
 		default:
-			snd_iprintf(buffer, "unkown\n");
+			snd_iprintf(buffer, "unknown\n");
 			break;
 		}
 		snd_iprintf(buffer, "Sample Bits: ");
diff --git a/sound/pci/cs46xx/imgs/cwcdma.asp b/sound/pci/cs46xx/imgs/cwcdma.asp
index 09d24c7..a65e119 100644
--- a/sound/pci/cs46xx/imgs/cwcdma.asp
+++ b/sound/pci/cs46xx/imgs/cwcdma.asp
@@ -26,10 +26,11 @@
 //
 //
 // The purpose of this code is very simple: make it possible to tranfser
-// the samples 'as they are' with no alteration from a PCMreader SCB (DMA from host)
-// to any other SCB. This is useful for AC3 throug SPDIF. SRC (source rate converters) 
-// task always alters the samples in some how, however it's from 48khz -> 48khz. The
-// alterations are not audible, but AC3 wont work. 
+// the samples 'as they are' with no alteration from a PCMreader
+// SCB (DMA from host) to any other SCB. This is useful for AC3 through SPDIF.
+// SRC (source rate converters) task always alters the samples in somehow,
+// however it's from 48khz -> 48khz.
+// The alterations are not audible, but AC3 wont work. 
 //
 //        ...
 //         |
diff --git a/sound/pci/emu10k1/emu10k1x.c b/sound/pci/emu10k1/emu10k1x.c
index 6b8ae7b..1d369ff 100644
--- a/sound/pci/emu10k1/emu10k1x.c
+++ b/sound/pci/emu10k1/emu10k1x.c
@@ -184,7 +184,7 @@ MODULE_PARM_DESC(enable, "Enable the EMU10K1X soundcard.");
  * The hardware has 3 channels for playback and 1 for capture.
  *  - channel 0 is the front channel
  *  - channel 1 is the rear channel
- *  - channel 2 is the center/lfe chanel
+ *  - channel 2 is the center/lfe channel
  * Volume is controlled by the AC97 for the front and rear channels by
  * the PCM Playback Volume, Sigmatel Surround Playback Volume and 
  * Surround Playback Volume. The Sigmatel 4-Speaker Stereo switch affects
diff --git a/sound/pci/hda/patch_cirrus.c b/sound/pci/hda/patch_cirrus.c
index 2439e84..4b200da 100644
--- a/sound/pci/hda/patch_cirrus.c
+++ b/sound/pci/hda/patch_cirrus.c
@@ -938,7 +938,7 @@ static void init_input(struct hda_codec *codec)
 		coef |= 0x0500; /* DMIC2 enable 2 channels, disable GPIO1 */
 	if (is_active_pin(codec, CS_DMIC1_PIN_NID))
 		coef |= 0x1800; /* DMIC1 enable 2 channels, disable GPIO0 
-				 * No effect if SPDIF_OUT2 is slected in 
+				 * No effect if SPDIF_OUT2 is selected in 
 				 * IDX_SPDIF_CTL.
 				  */
 	cs_vendor_coef_set(codec, IDX_ADC_CFG, coef);
diff --git a/sound/pci/hda/patch_cmedia.c b/sound/pci/hda/patch_cmedia.c
index 85c81fe..a45c116 100644
--- a/sound/pci/hda/patch_cmedia.c
+++ b/sound/pci/hda/patch_cmedia.c
@@ -66,7 +66,7 @@ struct cmi_spec {
 
 	struct hda_pcm pcm_rec[2];	/* PCM information */
 
-	/* pin deafault configuration */
+	/* pin default configuration */
 	hda_nid_t pin_nid[NUM_PINS];
 	unsigned int def_conf[NUM_PINS];
 	unsigned int pin_def_confs;
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index d967836..db4a736 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -6618,7 +6618,7 @@ static struct hda_input_mux alc889A_mb31_capture_source = {
 		/* Front Mic (0x01) unused */
 		{ "Line", 0x2 },
 		/* Line 2 (0x03) unused */
-		/* CD (0x04) unsused? */
+		/* CD (0x04) unused? */
 	},
 };
 
diff --git a/sound/pci/ice1712/juli.c b/sound/pci/ice1712/juli.c
index 0c9413d..98bc3b7 100644
--- a/sound/pci/ice1712/juli.c
+++ b/sound/pci/ice1712/juli.c
@@ -380,7 +380,7 @@ static struct snd_kcontrol_new juli_mute_controls[] __devinitdata = {
 	 * inputs) are fed from Xilinx.
 	 *
 	 * I even checked traces on board and coded a support in driver for
-	 * an alternative possiblity - the unused I2S ICE output channels
+	 * an alternative possibility - the unused I2S ICE output channels
 	 * switched to HW-IN/SPDIF-IN and providing the monitoring signal to
 	 * the DAC - to no avail. The I2S outputs seem to be unconnected.
 	 *
diff --git a/sound/pci/rme9652/hdspm.c b/sound/pci/rme9652/hdspm.c
index 0dce331..a1b10d1 100644
--- a/sound/pci/rme9652/hdspm.c
+++ b/sound/pci/rme9652/hdspm.c
@@ -3017,7 +3017,7 @@ snd_hdspm_proc_read_madi(struct snd_info_entry * entry,
 		insel = "Coaxial";
 		break;
 	default:
-		insel = "Unkown";
+		insel = "Unknown";
 	}
 
 	switch (hdspm->control_register & HDSPM_SyncRefMask) {
@@ -3028,7 +3028,7 @@ snd_hdspm_proc_read_madi(struct snd_info_entry * entry,
 		syncref = "MADI";
 		break;
 	default:
-		syncref = "Unkown";
+		syncref = "Unknown";
 	}
 	snd_iprintf(buffer, "Inputsel = %s, SyncRef = %s\n", insel,
 		    syncref);