Merge tag 'drm-intel-fixes-2013-11-07' of git://people.freedesktop.org/~danvet/drm-intel into drm-next

Bit a bit -fixes pull request in the merge window than usual dua to two
feauture-y things:
- Display CRCs are now enabled on all platforms, including the odd DP case
  on gm45/vlv. Since this is a testing-only feature it should ever hurt,
  but I figured it'll help with regression-testing -fixes. So I left it
  in and didn't postpone it to 3.14.
- Display power well refactoring from Imre. Would have caused major pain
  conflict with the bdw stage 1 patches if I'd postpone this to -next.
  It's only an relatively small interface rework, so shouldn't cause pain.
  It's also been in my tree since almost 3 weeks already.

That accounts for about two thirds of the pull, otherwise just bugfixes:
- vlv backlight fix from Jesse/Jani
- vlv vblank timestamp fix from Jesse
- improved edp detection through vbt from Ville (fixes a vlv issue)
- eDP vdd fix from Paulo
- fixes for dvo lvds on i830M
- a few smaller things all over

Note: This contains a backmerge of v3.12. Since the -internal branch
always applied on top of -nightly I need that unified base to merge bdw
patches. So you'll get a conflict with radeon connector props when pulling
this (and nouveau/master will also conflict a bit when Ben doesn't
rebase). The backmerge itself only had conflicts in drm/i915.

There's also a tiny conflict between Jani's backlight fix and your sysfs
lifetime fix in drm-next.

* tag 'drm-intel-fixes-2013-11-07' of git://people.freedesktop.org/~danvet/drm-intel: (940 commits)
  drm/i915/vlv: use per-pipe backlight controls v2
  drm/i915: make backlight functions take a connector
  drm/i915: move opregion asle request handling to a work queue
  drm/i915/vlv: use PIPE_START_VBLANK interrupts on VLV
  drm/i915: Make intel_dp_is_edp() less specific
  drm/i915: Give names to the VBT child device type bits
  drm/i915/vlv: enable HDA display audio for Valleyview2
  drm/i915/dvo: call ->mode_set callback only when the port is running
  drm/i915: avoid unclaimed registers when capturing the error state
  drm/i915: Enable DP port CRC for the "auto" source on g4x/vlv
  drm/i915: scramble reset support for DP port CRC on vlv
  drm/i915: scramble reset support for DP port CRC on g4x
  drm/i916: add "auto" pipe CRC source
  ...

Conflicts:
	MAINTAINERS
	drivers/gpu/drm/i915/intel_panel.c
	drivers/gpu/drm/nouveau/core/subdev/mc/base.c
	drivers/gpu/drm/radeon/atombios_encoders.c
	drivers/gpu/drm/radeon/radeon_connectors.c

1 files changed, 51 insertions, 22 deletions

diff --git a/tools/perf/builtin-record.c b/tools/perf/builtin-record.c
index a41ac415..d046514 100644
--- a/tools/perf/builtin-record.c
+++ b/tools/perf/builtin-record.c
@@ -712,21 +712,12 @@ static int get_stack_size(char *str, unsigned long *_size)
 }
 #endif /* LIBUNWIND_SUPPORT */
 
-int record_parse_callchain_opt(const struct option *opt,
-			       const char *arg, int unset)
+int record_parse_callchain(const char *arg, struct perf_record_opts *opts)
 {
-	struct perf_record_opts *opts = opt->value;
 	char *tok, *name, *saveptr = NULL;
 	char *buf;
 	int ret = -1;
 
-	/* --no-call-graph */
-	if (unset)
-		return 0;
-
-	/* We specified default option if none is provided. */
-	BUG_ON(!arg);
-
 	/* We need buffer that we know we can write to. */
 	buf = malloc(strlen(arg) + 1);
 	if (!buf)
@@ -764,13 +755,9 @@ int record_parse_callchain_opt(const struct option *opt,
 				ret = get_stack_size(tok, &size);
 				opts->stack_dump_size = size;
 			}
-
-			if (!ret)
-				pr_debug("callchain: stack dump size %d\n",
-					 opts->stack_dump_size);
 #endif /* LIBUNWIND_SUPPORT */
 		} else {
-			pr_err("callchain: Unknown -g option "
+			pr_err("callchain: Unknown --call-graph option "
 			       "value: %s\n", arg);
 			break;
 		}
@@ -778,13 +765,52 @@ int record_parse_callchain_opt(const struct option *opt,
 	} while (0);
 
 	free(buf);
+	return ret;
+}
+
+static void callchain_debug(struct perf_record_opts *opts)
+{
+	pr_debug("callchain: type %d\n", opts->call_graph);
 
+	if (opts->call_graph == CALLCHAIN_DWARF)
+		pr_debug("callchain: stack dump size %d\n",
+			 opts->stack_dump_size);
+}
+
+int record_parse_callchain_opt(const struct option *opt,
+			       const char *arg,
+			       int unset)
+{
+	struct perf_record_opts *opts = opt->value;
+	int ret;
+
+	/* --no-call-graph */
+	if (unset) {
+		opts->call_graph = CALLCHAIN_NONE;
+		pr_debug("callchain: disabled\n");
+		return 0;
+	}
+
+	ret = record_parse_callchain(arg, opts);
 	if (!ret)
-		pr_debug("callchain: type %d\n", opts->call_graph);
+		callchain_debug(opts);
 
 	return ret;
 }
 
+int record_callchain_opt(const struct option *opt,
+			 const char *arg __maybe_unused,
+			 int unset __maybe_unused)
+{
+	struct perf_record_opts *opts = opt->value;
+
+	if (opts->call_graph == CALLCHAIN_NONE)
+		opts->call_graph = CALLCHAIN_FP;
+
+	callchain_debug(opts);
+	return 0;
+}
+
 static const char * const record_usage[] = {
 	"perf record [<options>] [<command>]",
 	"perf record [<options>] -- <command> [<options>]",
@@ -813,12 +839,12 @@ static struct perf_record record = {
 	},
 };
 
-#define CALLCHAIN_HELP "do call-graph (stack chain/backtrace) recording: "
+#define CALLCHAIN_HELP "setup and enables call-graph (stack chain/backtrace) recording: "
 
 #ifdef LIBUNWIND_SUPPORT
-const char record_callchain_help[] = CALLCHAIN_HELP "[fp] dwarf";
+const char record_callchain_help[] = CALLCHAIN_HELP "fp dwarf";
 #else
-const char record_callchain_help[] = CALLCHAIN_HELP "[fp]";
+const char record_callchain_help[] = CALLCHAIN_HELP "fp";
 #endif
 
 /*
@@ -858,9 +884,12 @@ const struct option record_options[] = {
 		     "number of mmap data pages"),
 	OPT_BOOLEAN(0, "group", &record.opts.group,
 		    "put the counters into a counter group"),
-	OPT_CALLBACK_DEFAULT('g', "call-graph", &record.opts,
-			     "mode[,dump_size]", record_callchain_help,
-			     &record_parse_callchain_opt, "fp"),
+	OPT_CALLBACK_NOOPT('g', NULL, &record.opts,
+			   NULL, "enables call-graph recording" ,
+			   &record_callchain_opt),
+	OPT_CALLBACK(0, "call-graph", &record.opts,
+		     "mode[,dump_size]", record_callchain_help,
+		     &record_parse_callchain_opt),
 	OPT_INCR('v', "verbose", &verbose,
 		    "be more verbose (show counter open errors, etc)"),
 	OPT_BOOLEAN('q', "quiet", &quiet, "don't print any message"),