diff options
| -rw-r--r-- | arch/x86/Kconfig | 4 | ||||
| -rw-r--r-- | arch/x86/kernel/Makefile | 3 | ||||
| -rw-r--r-- | arch/x86/kernel/head32.c | 9 | ||||
| -rw-r--r-- | arch/x86/kernel/head_64.S | 3 | ||||
| -rw-r--r-- | arch/x86/kernel/setup.c | 2 | ||||
| -rw-r--r-- | arch/x86/kernel/smpboot.c | 10 | ||||
| -rw-r--r-- | arch/x86/kernel/trampoline.c | 42 | ||||
| -rw-r--r-- | arch/x86/kernel/trampoline_32.S | 15 | ||||
| -rw-r--r-- | arch/x86/kernel/trampoline_64.S | 30 | ||||
| -rw-r--r-- | arch/x86/kernel/vmlinux.lds.S | 13 |
10 files changed, 73 insertions, 58 deletions
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index d5ed94d..1359bc9 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -217,10 +217,6 @@ config X86_HT def_bool y depends on SMP -config X86_TRAMPOLINE - def_bool y - depends on SMP || (64BIT && ACPI_SLEEP) - config X86_32_LAZY_GS def_bool y depends on X86_32 && !CC_STACKPROTECTOR diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index 34244b2..2e8ce0d 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -47,7 +47,7 @@ obj-y += tsc.o io_delay.o rtc.o obj-y += pci-iommu_table.o obj-y += resource.o -obj-$(CONFIG_X86_TRAMPOLINE) += trampoline.o +obj-y += trampoline.o trampoline_$(BITS).o obj-y += process.o obj-y += i387.o xsave.o obj-y += ptrace.o @@ -69,7 +69,6 @@ obj-$(CONFIG_SMP) += smp.o obj-$(CONFIG_SMP) += smpboot.o tsc_sync.o obj-$(CONFIG_SMP) += setup_percpu.o obj-$(CONFIG_X86_64_SMP) += tsc_sync.o -obj-$(CONFIG_X86_TRAMPOLINE) += trampoline_$(BITS).o obj-$(CONFIG_X86_MPPARSE) += mpparse.o obj-y += apic/ obj-$(CONFIG_X86_REBOOTFIXUPS) += reboot_fixups_32.o diff --git a/arch/x86/kernel/head32.c b/arch/x86/kernel/head32.c index 7f138b3..d6d6bb3 100644 --- a/arch/x86/kernel/head32.c +++ b/arch/x86/kernel/head32.c @@ -34,15 +34,6 @@ void __init i386_start_kernel(void) { memblock_init(); -#ifdef CONFIG_X86_TRAMPOLINE - /* - * But first pinch a few for the stack/trampoline stuff - * FIXME: Don't need the extra page at 4K, but need to fix - * trampoline before removing it. (see the GDT stuff) - */ - memblock_x86_reserve_range(PAGE_SIZE, PAGE_SIZE + PAGE_SIZE, "EX TRAMPOLINE"); -#endif - memblock_x86_reserve_range(__pa_symbol(&_text), __pa_symbol(&__bss_stop), "TEXT DATA BSS"); #ifdef CONFIG_BLK_DEV_INITRD diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S index 239046b..e11e394 100644 --- a/arch/x86/kernel/head_64.S +++ b/arch/x86/kernel/head_64.S @@ -136,10 +136,9 @@ ident_complete: /* Fixup phys_base */ addq %rbp, phys_base(%rip) -#ifdef CONFIG_X86_TRAMPOLINE + /* Fixup trampoline */ addq %rbp, trampoline_level4_pgt + 0(%rip) addq %rbp, trampoline_level4_pgt + (511*8)(%rip) -#endif /* Due to ENTRY(), sometimes the empty space gets filled with * zeros. Better take a jmp than relying on empty space being diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index d3cfe26c..994ea20 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -935,7 +935,7 @@ void __init setup_arch(char **cmdline_p) printk(KERN_DEBUG "initial memory mapped : 0 - %08lx\n", max_pfn_mapped<<PAGE_SHIFT); - reserve_trampoline_memory(); + setup_trampolines(); #ifdef CONFIG_ACPI_SLEEP /* diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index 08776a9..5452733 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -788,7 +788,7 @@ do_rest: stack_start = c_idle.idle->thread.sp; /* start_ip had better be page-aligned! */ - start_ip = setup_trampoline(); + start_ip = trampoline_address(); /* So we see what's up */ announce_cpu(cpu, apicid); @@ -798,6 +798,8 @@ do_rest: * the targeted processor. */ + printk(KERN_DEBUG "smpboot cpu %d: start_ip = %lx\n", cpu, start_ip); + atomic_set(&init_deasserted, 0); if (get_uv_system_type() != UV_NON_UNIQUE_APIC) { @@ -851,8 +853,8 @@ do_rest: pr_debug("CPU%d: has booted.\n", cpu); else { boot_error = 1; - if (*((volatile unsigned char *)trampoline_base) - == 0xA5) + if (*(volatile u32 *)TRAMPOLINE_SYM(trampoline_status) + == 0xA5A5A5A5) /* trampoline started but...? */ pr_err("CPU%d: Stuck ??\n", cpu); else @@ -878,7 +880,7 @@ do_rest: } /* mark "stuck" area as not stuck */ - *((volatile unsigned long *)trampoline_base) = 0; + *(volatile u32 *)TRAMPOLINE_SYM(trampoline_status) = 0; if (get_uv_system_type() != UV_NON_UNIQUE_APIC) { /* diff --git a/arch/x86/kernel/trampoline.c b/arch/x86/kernel/trampoline.c index a375616..a91ae77 100644 --- a/arch/x86/kernel/trampoline.c +++ b/arch/x86/kernel/trampoline.c @@ -2,39 +2,41 @@ #include <linux/memblock.h> #include <asm/trampoline.h> +#include <asm/cacheflush.h> #include <asm/pgtable.h> -#if defined(CONFIG_X86_64) && defined(CONFIG_ACPI_SLEEP) -#define __trampinit -#define __trampinitdata -#else -#define __trampinit __cpuinit -#define __trampinitdata __cpuinitdata -#endif +unsigned char *x86_trampoline_base; -/* ready for x86_64 and x86 */ -unsigned char *__trampinitdata trampoline_base; - -void __init reserve_trampoline_memory(void) +void __init setup_trampolines(void) { phys_addr_t mem; + size_t size = PAGE_ALIGN(x86_trampoline_end - x86_trampoline_start); /* Has to be in very low memory so we can execute real-mode AP code. */ - mem = memblock_find_in_range(0, 1<<20, TRAMPOLINE_SIZE, PAGE_SIZE); + mem = memblock_find_in_range(0, 1<<20, size, PAGE_SIZE); if (mem == MEMBLOCK_ERROR) panic("Cannot allocate trampoline\n"); - trampoline_base = __va(mem); - memblock_x86_reserve_range(mem, mem + TRAMPOLINE_SIZE, "TRAMPOLINE"); + x86_trampoline_base = __va(mem); + memblock_x86_reserve_range(mem, mem + size, "TRAMPOLINE"); + + printk(KERN_DEBUG "Base memory trampoline at [%p] %llx size %zu\n", + x86_trampoline_base, (unsigned long long)mem, size); + + memcpy(x86_trampoline_base, x86_trampoline_start, size); } /* - * Currently trivial. Write the real->protected mode - * bootstrap into the page concerned. The caller - * has made sure it's suitably aligned. + * setup_trampolines() gets called very early, to guarantee the + * availability of low memory. This is before the proper kernel page + * tables are set up, so we cannot set page permissions in that + * function. Thus, we use an arch_initcall instead. */ -unsigned long __trampinit setup_trampoline(void) +static int __init configure_trampolines(void) { - memcpy(trampoline_base, trampoline_data, TRAMPOLINE_SIZE); - return virt_to_phys(trampoline_base); + size_t size = PAGE_ALIGN(x86_trampoline_end - x86_trampoline_start); + + set_memory_x((unsigned long)x86_trampoline_base, size >> PAGE_SHIFT); + return 0; } +arch_initcall(configure_trampolines); diff --git a/arch/x86/kernel/trampoline_32.S b/arch/x86/kernel/trampoline_32.S index 8508237..451c0a7 100644 --- a/arch/x86/kernel/trampoline_32.S +++ b/arch/x86/kernel/trampoline_32.S @@ -32,9 +32,11 @@ #include <asm/segment.h> #include <asm/page_types.h> -/* We can free up trampoline after bootup if cpu hotplug is not supported. */ -__CPUINITRODATA -.code16 +#ifdef CONFIG_SMP + + .section ".x86_trampoline","a" + .balign PAGE_SIZE + .code16 ENTRY(trampoline_data) r_base = . @@ -44,7 +46,7 @@ r_base = . cli # We should be safe anyway - movl $0xA5A5A5A5, trampoline_data - r_base + movl $0xA5A5A5A5, trampoline_status - r_base # write marker for master knows we're running /* GDT tables in non default location kernel can be beyond 16MB and @@ -72,5 +74,10 @@ boot_idt_descr: .word 0 # idt limit = 0 .long 0 # idt base = 0L +ENTRY(trampoline_status) + .long 0 + .globl trampoline_end trampoline_end: + +#endif /* CONFIG_SMP */ diff --git a/arch/x86/kernel/trampoline_64.S b/arch/x86/kernel/trampoline_64.S index 075d130..49c77a6 100644 --- a/arch/x86/kernel/trampoline_64.S +++ b/arch/x86/kernel/trampoline_64.S @@ -32,13 +32,9 @@ #include <asm/segment.h> #include <asm/processor-flags.h> -#ifdef CONFIG_ACPI_SLEEP -.section .rodata, "a", @progbits -#else -/* We can free up the trampoline after bootup if cpu hotplug is not supported. */ -__CPUINITRODATA -#endif -.code16 + .section ".x86_trampoline","a" + .balign PAGE_SIZE + .code16 ENTRY(trampoline_data) r_base = . @@ -50,7 +46,7 @@ r_base = . mov %ax, %ss - movl $0xA5A5A5A5, trampoline_data - r_base + movl $0xA5A5A5A5, trampoline_status - r_base # write marker for master knows we're running # Setup stack @@ -64,10 +60,13 @@ r_base = . movzx %ax, %esi # Find the 32bit trampoline location shll $4, %esi - # Fixup the vectors - addl %esi, startup_32_vector - r_base - addl %esi, startup_64_vector - r_base - addl %esi, tgdt + 2 - r_base # Fixup the gdt pointer + # Fixup the absolute vectors + leal (startup_32 - r_base)(%esi), %eax + movl %eax, startup_32_vector - r_base + leal (startup_64 - r_base)(%esi), %eax + movl %eax, startup_64_vector - r_base + leal (tgdt - r_base)(%esi), %eax + movl %eax, (tgdt + 2 - r_base) /* * GDT tables in non default location kernel can be beyond 16MB and @@ -129,6 +128,7 @@ no_longmode: jmp no_longmode #include "verify_cpu.S" + .balign 4 # Careful these need to be in the same 64K segment as the above; tidt: .word 0 # idt limit = 0 @@ -156,6 +156,12 @@ startup_64_vector: .long startup_64 - r_base .word __KERNEL_CS, 0 + .balign 4 +fixup_base: + .long 0 +ENTRY(trampoline_status) + .long 0 + trampoline_stack: .org 0x1000 trampoline_stack_end: diff --git a/arch/x86/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux.lds.S index bf47007..cb2c506 100644 --- a/arch/x86/kernel/vmlinux.lds.S +++ b/arch/x86/kernel/vmlinux.lds.S @@ -240,6 +240,18 @@ SECTIONS INIT_DATA_SECTION(16) + /* + * Code and data for a variety of lowlevel trampolines, to be + * copied into base memory (< 1 MiB) during initialization. + * Since it is copied early, the main copy can be discarded + * afterwards. + */ + .x86_trampoline : AT(ADDR(.x86_trampoline) - LOAD_OFFSET) { + x86_trampoline_start = .; + *(.x86_trampoline) + x86_trampoline_end = .; + } + .x86_cpu_dev.init : AT(ADDR(.x86_cpu_dev.init) - LOAD_OFFSET) { __x86_cpu_dev_start = .; *(.x86_cpu_dev.init) @@ -291,6 +303,7 @@ SECTIONS *(.iommu_table) __iommu_table_end = .; } + . = ALIGN(8); /* * .exit.text is discard at runtime, not link time, to deal with |