diff options
178 files changed, 4140 insertions, 12461 deletions
@@ -3054,6 +3054,7 @@ D: PLX USB338x driver D: PCA9634 driver D: Option GTM671WFS D: Fintek F81216A +D: AD5761 iio driver D: Various kernel hacks S: Qtechnology A/S S: Valby Langgade 142 diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio index 0439c2a..80c6fce 100644 --- a/Documentation/ABI/testing/sysfs-bus-iio +++ b/Documentation/ABI/testing/sysfs-bus-iio @@ -497,7 +497,9 @@ Description: 6kohm_to_gnd: connected to ground via a 6kOhm resistor, 20kohm_to_gnd: connected to ground via a 20kOhm resistor, 100kohm_to_gnd: connected to ground via an 100kOhm resistor, + 125kohm_to_gnd: connected to ground via an 125kOhm resistor, 500kohm_to_gnd: connected to ground via a 500kOhm resistor, + 640kohm_to_gnd: connected to ground via a 640kOhm resistor, three_state: left floating. For a list of available output power down options read outX_powerdown_mode_available. If Y is not present the @@ -1491,3 +1493,10 @@ Description: This ABI is especially applicable for humidity sensors to heatup the device and get rid of any condensation in some humidity environment + +What: /sys/bus/iio/devices/iio:deviceX/in_ph_raw +KernelVersion: 4.5 +Contact: linux-iio@vger.kernel.org +Description: + Raw (unscaled no offset etc.) pH reading of a substance as a negative + base-10 logarithm of hydrodium ions in a litre of water. diff --git a/Documentation/devicetree/bindings/iio/accel/mma8452.txt b/Documentation/devicetree/bindings/iio/accel/mma8452.txt index 3c10e85..165937e 100644 --- a/Documentation/devicetree/bindings/iio/accel/mma8452.txt +++ b/Documentation/devicetree/bindings/iio/accel/mma8452.txt @@ -1,8 +1,10 @@ -Freescale MMA8452Q, MMA8453Q, MMA8652FC or MMA8653FC triaxial accelerometer +Freescale MMA8451Q, MMA8452Q, MMA8453Q, MMA8652FC or MMA8653FC +triaxial accelerometer Required properties: - compatible: should contain one of + * "fsl,mma8451" * "fsl,mma8452" * "fsl,mma8453" * "fsl,mma8652" diff --git a/Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt b/Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt new file mode 100644 index 0000000..3223684 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/adc/at91-sama5d2_adc.txt @@ -0,0 +1,28 @@ +* AT91 SAMA5D2 Analog to Digital Converter (ADC) + +Required properties: + - compatible: Should be "atmel,sama5d2-adc". + - reg: Should contain ADC registers location and length. + - interrupts: Should contain the IRQ line for the ADC. + - clocks: phandle to device clock. + - clock-names: Must be "adc_clk". + - vref-supply: Supply used as reference for conversions. + - vddana-supply: Supply for the adc device. + - atmel,min-sample-rate-hz: Minimum sampling rate, it depends on SoC. + - atmel,max-sample-rate-hz: Maximum sampling rate, it depends on SoC. + - atmel,startup-time-ms: Startup time expressed in ms, it depends on SoC. + +Example: + +adc: adc@fc030000 { + compatible = "atmel,sama5d2-adc"; + reg = <0xfc030000 0x100>; + interrupts = <40 IRQ_TYPE_LEVEL_HIGH 7>; + clocks = <&adc_clk>; + clock-names = "adc_clk"; + atmel,min-sample-rate-hz = <200000>; + atmel,max-sample-rate-hz = <20000000>; + atmel,startup-time-ms = <4>; + vddana-supply = <&vdd_3v3_lp_reg>; + vref-supply = <&vdd_3v3_lp_reg>; +} diff --git a/Documentation/devicetree/bindings/iio/adc/mcp3422.txt b/Documentation/devicetree/bindings/iio/adc/mcp3422.txt index dcae4cc..82bcce0 100644 --- a/Documentation/devicetree/bindings/iio/adc/mcp3422.txt +++ b/Documentation/devicetree/bindings/iio/adc/mcp3422.txt @@ -6,6 +6,7 @@ Required properties: "microchip,mcp3422" or "microchip,mcp3423" or "microchip,mcp3424" or + "microchip,mcp3425" or "microchip,mcp3426" or "microchip,mcp3427" or "microchip,mcp3428" diff --git a/Documentation/devicetree/bindings/iio/chemical/atlas,ph-sm.txt b/Documentation/devicetree/bindings/iio/chemical/atlas,ph-sm.txt new file mode 100644 index 0000000..cffa190 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/chemical/atlas,ph-sm.txt @@ -0,0 +1,22 @@ +* Atlas Scientific pH-SM OEM sensor + +http://www.atlas-scientific.com/_files/_datasheets/_oem/pH_oem_datasheet.pdf + +Required properties: + + - compatible: must be "atlas,ph-sm" + - reg: the I2C address of the sensor + - interrupt-parent: should be the phandle for the interrupt controller + - interrupts: the sole interrupt generated by the device + + Refer to interrupt-controller/interrupts.txt for generic interrupt client + node bindings. + +Example: + +atlas@65 { + compatible = "atlas,ph-sm"; + reg = <0x65>; + interrupt-parent = <&gpio1>; + interrupts = <16 2>; +}; diff --git a/Documentation/devicetree/bindings/iio/health/max30100.txt b/Documentation/devicetree/bindings/iio/health/max30100.txt index f6fbac6..295a9ed 100644 --- a/Documentation/devicetree/bindings/iio/health/max30100.txt +++ b/Documentation/devicetree/bindings/iio/health/max30100.txt @@ -11,11 +11,19 @@ Required properties: Refer to interrupt-controller/interrupts.txt for generic interrupt client node bindings. +Optional properties: + - maxim,led-current-microamp: configuration for LED current in microamperes + while the engine is running. First indexed value is the configuration for + the RED LED, and second value is for the IR LED. + + Refer to the datasheet for the allowed current values. + Example: max30100@057 { compatible = "maxim,max30100"; reg = <57>; + maxim,led-current-microamp = <24000 50000>; interrupt-parent = <&gpio1>; interrupts = <16 2>; }; diff --git a/Documentation/devicetree/bindings/iio/light/opt3001.txt b/Documentation/devicetree/bindings/iio/light/opt3001.txt new file mode 100644 index 0000000..eac30d5 --- /dev/null +++ b/Documentation/devicetree/bindings/iio/light/opt3001.txt @@ -0,0 +1,26 @@ +* Texas Instruments OPT3001 Ambient Light Sensor + +The driver supports interrupt-driven and interrupt-less operation, depending +on whether an interrupt property has been populated into the DT. Note that +the optional generation of IIO events on rising/falling light threshold changes +requires the use of interrupts. Without interrupts, only the simple reading +of the current light value is supported through the IIO API. + +http://www.ti.com/product/opt3001 + +Required properties: + - compatible: should be "ti,opt3001" + - reg: the I2C address of the sensor + +Optional properties: + - interrupt-parent: should be the phandle for the interrupt controller + - interrupts: interrupt mapping for GPIO IRQ (configure for falling edge) + +Example: + +opt3001@44 { + compatible = "ti,opt3001"; + reg = <0x44>; + interrupt-parent = <&gpio1>; + interrupts = <28 IRQ_TYPE_EDGE_FALLING>; +}; diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index 72e2c5a..44ddc98 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -28,6 +28,7 @@ arm ARM Ltd. armadeus ARMadeus Systems SARL artesyn Artesyn Embedded Technologies Inc. asahi-kasei Asahi Kasei Corp. +atlas Atlas Scientific LLC atmel Atmel Corporation auo AU Optronics Corporation avago Avago Technologies diff --git a/drivers/staging/panel/lcd-panel-cgram.txt b/Documentation/misc-devices/lcd-panel-cgram.txt index 7f82c90..7f82c90 100644 --- a/drivers/staging/panel/lcd-panel-cgram.txt +++ b/Documentation/misc-devices/lcd-panel-cgram.txt diff --git a/MAINTAINERS b/MAINTAINERS index 7f1fa4f..3aae72b 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1949,6 +1949,12 @@ M: Nicolas Ferre <nicolas.ferre@atmel.com> S: Supported F: drivers/tty/serial/atmel_serial.c +ATMEL SAMA5D2 ADC DRIVER +M: Ludovic Desroches <ludovic.desroches@atmel.com> +L: linux-iio@vger.kernel.org +S: Supported +F: drivers/iio/adc/at91-sama5d2_adc.c + ATMEL Audio ALSA driver M: Nicolas Ferre <nicolas.ferre@atmel.com> L: alsa-devel@alsa-project.org (moderated for non-subscribers) @@ -3543,13 +3549,6 @@ L: driverdev-devel@linuxdriverproject.org S: Maintained F: drivers/staging/dgnc/ -DIGI EPCA PCI PRODUCTS -M: Lidza Louina <lidza.louina@gmail.com> -M: Daeseok Youn <daeseok.youn@gmail.com> -L: driverdev-devel@linuxdriverproject.org -S: Maintained -F: drivers/staging/dgap/ - DIOLAN U2C-12 I2C DRIVER M: Guenter Roeck <linux@roeck-us.net> L: linux-i2c@vger.kernel.org @@ -8161,6 +8160,13 @@ S: Maintained F: Documentation/mn10300/ F: arch/mn10300/ +PARALLEL LCD/KEYPAD PANEL DRIVER +M: Willy Tarreau <willy@haproxy.com> +M: Ksenija Stanojevic <ksenija.stanojevic@gmail.com> +S: Odd Fixes +F: Documentation/misc-devices/lcd-panel-cgram.txt +F: drivers/misc/panel.c + PARALLEL PORT SUBSYSTEM M: Sudip Mukherjee <sudipm.mukherjee@gmail.com> M: Sudip Mukherjee <sudip@vectorindia.org> @@ -10388,19 +10394,6 @@ L: linux-tegra@vger.kernel.org S: Maintained F: drivers/staging/nvec/ -STAGING - OLPC SECONDARY DISPLAY CONTROLLER (DCON) -M: Jens Frederich <jfrederich@gmail.com> -M: Daniel Drake <dsd@laptop.org> -M: Jon Nettleton <jon.nettleton@gmail.com> -W: http://wiki.laptop.org/go/DCON -S: Maintained -F: drivers/staging/olpc_dcon/ - -STAGING - PARALLEL LCD/KEYPAD PANEL DRIVER -M: Willy Tarreau <willy@meta-x.org> -S: Odd Fixes -F: drivers/staging/panel/ - STAGING - REALTEK RTL8712U DRIVERS M: Larry Finger <Larry.Finger@lwfinger.net> M: Florian Schilhabel <florian.c.schilhabel@googlemail.com>. diff --git a/drivers/iio/accel/Kconfig b/drivers/iio/accel/Kconfig index 833ea9d..b0d3ecf 100644 --- a/drivers/iio/accel/Kconfig +++ b/drivers/iio/accel/Kconfig @@ -143,7 +143,7 @@ config MMA8452 select IIO_TRIGGERED_BUFFER help Say yes here to build support for the following Freescale 3-axis - accelerometers: MMA8452Q, MMA8453Q, MMA8652FC, MMA8653FC. + accelerometers: MMA8451Q, MMA8452Q, MMA8453Q, MMA8652FC, MMA8653FC. To compile this driver as a module, choose M here: the module will be called mma8452. diff --git a/drivers/iio/accel/mma8452.c b/drivers/iio/accel/mma8452.c index ccc632a..7f4994f 100644 --- a/drivers/iio/accel/mma8452.c +++ b/drivers/iio/accel/mma8452.c @@ -1,6 +1,7 @@ /* * mma8452.c - Support for following Freescale 3-axis accelerometers: * + * MMA8451Q (14 bit) * MMA8452Q (12 bit) * MMA8453Q (10 bit) * MMA8652FC (12 bit) @@ -15,7 +16,7 @@ * * 7-bit I2C slave address 0x1c/0x1d (pin selectable) * - * TODO: orientation / freefall events, autosleep + * TODO: orientation events, autosleep */ #include <linux/module.h> @@ -85,8 +86,9 @@ #define MMA8452_INT_FF_MT BIT(2) #define MMA8452_INT_TRANS BIT(5) -#define MMA8452_DEVICE_ID 0x2a -#define MMA8453_DEVICE_ID 0x3a +#define MMA8451_DEVICE_ID 0x1a +#define MMA8452_DEVICE_ID 0x2a +#define MMA8453_DEVICE_ID 0x3a #define MMA8652_DEVICE_ID 0x4a #define MMA8653_DEVICE_ID 0x5a @@ -416,6 +418,51 @@ fail: return ret; } +/* returns >0 if in freefall mode, 0 if not or <0 if an error occured */ +static int mma8452_freefall_mode_enabled(struct mma8452_data *data) +{ + int val; + const struct mma_chip_info *chip = data->chip_info; + + val = i2c_smbus_read_byte_data(data->client, chip->ev_cfg); + if (val < 0) + return val; + + return !(val & MMA8452_FF_MT_CFG_OAE); +} + +static int mma8452_set_freefall_mode(struct mma8452_data *data, bool state) +{ + int val; + const struct mma_chip_info *chip = data->chip_info; + + if ((state && mma8452_freefall_mode_enabled(data)) || + (!state && !(mma8452_freefall_mode_enabled(data)))) + return 0; + + val = i2c_smbus_read_byte_data(data->client, chip->ev_cfg); + if (val < 0) + return val; + + if (state) { + val |= BIT(idx_x + chip->ev_cfg_chan_shift); + val |= BIT(idx_y + chip->ev_cfg_chan_shift); + val |= BIT(idx_z + chip->ev_cfg_chan_shift); + val &= ~MMA8452_FF_MT_CFG_OAE; + } else { + val &= ~BIT(idx_x + chip->ev_cfg_chan_shift); + val &= ~BIT(idx_y + chip->ev_cfg_chan_shift); + val &= ~BIT(idx_z + chip->ev_cfg_chan_shift); + val |= MMA8452_FF_MT_CFG_OAE; + } + + val = mma8452_change_config(data, chip->ev_cfg, val); + if (val) + return val; + + return 0; +} + static int mma8452_set_hp_filter_frequency(struct mma8452_data *data, int val, int val2) { @@ -609,12 +656,22 @@ static int mma8452_read_event_config(struct iio_dev *indio_dev, const struct mma_chip_info *chip = data->chip_info; int ret; - ret = i2c_smbus_read_byte_data(data->client, - data->chip_info->ev_cfg); - if (ret < 0) - return ret; + switch (dir) { + case IIO_EV_DIR_FALLING: + return mma8452_freefall_mode_enabled(data); + case IIO_EV_DIR_RISING: + if (mma8452_freefall_mode_enabled(data)) + return 0; + + ret = i2c_smbus_read_byte_data(data->client, + data->chip_info->ev_cfg); + if (ret < 0) + return ret; - return !!(ret & BIT(chan->scan_index + chip->ev_cfg_chan_shift)); + return !!(ret & BIT(chan->scan_index + chip->ev_cfg_chan_shift)); + default: + return -EINVAL; + } } static int mma8452_write_event_config(struct iio_dev *indio_dev, @@ -627,19 +684,35 @@ static int mma8452_write_event_config(struct iio_dev *indio_dev, const struct mma_chip_info *chip = data->chip_info; int val; - val = i2c_smbus_read_byte_data(data->client, chip->ev_cfg); - if (val < 0) - return val; + switch (dir) { + case IIO_EV_DIR_FALLING: + return mma8452_set_freefall_mode(data, state); + case IIO_EV_DIR_RISING: + val = i2c_smbus_read_byte_data(data->client, chip->ev_cfg); + if (val < 0) + return val; + + if (state) { + if (mma8452_freefall_mode_enabled(data)) { + val &= ~BIT(idx_x + chip->ev_cfg_chan_shift); + val &= ~BIT(idx_y + chip->ev_cfg_chan_shift); + val &= ~BIT(idx_z + chip->ev_cfg_chan_shift); + val |= MMA8452_FF_MT_CFG_OAE; + } + val |= BIT(chan->scan_index + chip->ev_cfg_chan_shift); + } else { + if (mma8452_freefall_mode_enabled(data)) + return 0; - if (state) - val |= BIT(chan->scan_index + chip->ev_cfg_chan_shift); - else - val &= ~BIT(chan->scan_index + chip->ev_cfg_chan_shift); + val &= ~BIT(chan->scan_index + chip->ev_cfg_chan_shift); + } - val |= chip->ev_cfg_ele; - val |= MMA8452_FF_MT_CFG_OAE; + val |= chip->ev_cfg_ele; - return mma8452_change_config(data, chip->ev_cfg, val); + return mma8452_change_config(data, chip->ev_cfg, val); + default: + return -EINVAL; + } } static void mma8452_transient_interrupt(struct iio_dev *indio_dev) @@ -652,6 +725,16 @@ static void mma8452_transient_interrupt(struct iio_dev *indio_dev) if (src < 0) return; + if (mma8452_freefall_mode_enabled(data)) { + iio_push_event(indio_dev, + IIO_MOD_EVENT_CODE(IIO_ACCEL, 0, + IIO_MOD_X_AND_Y_AND_Z, + IIO_EV_TYPE_MAG, + IIO_EV_DIR_FALLING), + ts); + return; + } + if (src & data->chip_info->ev_src_xe) iio_push_event(indio_dev, IIO_MOD_EVENT_CODE(IIO_ACCEL, 0, IIO_MOD_X, @@ -745,6 +828,27 @@ static int mma8452_reg_access_dbg(struct iio_dev *indio_dev, return 0; } +static const struct iio_event_spec mma8452_freefall_event[] = { + { + .type = IIO_EV_TYPE_MAG, + .dir = IIO_EV_DIR_FALLING, + .mask_separate = BIT(IIO_EV_INFO_ENABLE), + .mask_shared_by_type = BIT(IIO_EV_INFO_VALUE) | + BIT(IIO_EV_INFO_PERIOD) | + BIT(IIO_EV_INFO_HIGH_PASS_FILTER_3DB) + }, +}; + +static const struct iio_event_spec mma8652_freefall_event[] = { + { + .type = IIO_EV_TYPE_MAG, + .dir = IIO_EV_DIR_FALLING, + .mask_separate = BIT(IIO_EV_INFO_ENABLE), + .mask_shared_by_type = BIT(IIO_EV_INFO_VALUE) | + BIT(IIO_EV_INFO_PERIOD) + }, +}; + static const struct iio_event_spec mma8452_transient_event[] = { { .type = IIO_EV_TYPE_MAG, @@ -781,6 +885,24 @@ static struct attribute_group mma8452_event_attribute_group = { .attrs = mma8452_event_attributes, }; +#define MMA8452_FREEFALL_CHANNEL(modifier) { \ + .type = IIO_ACCEL, \ + .modified = 1, \ + .channel2 = modifier, \ + .scan_index = -1, \ + .event_spec = mma8452_freefall_event, \ + .num_event_specs = ARRAY_SIZE(mma8452_freefall_event), \ +} + +#define MMA8652_FREEFALL_CHANNEL(modifier) { \ + .type = IIO_ACCEL, \ + .modified = 1, \ + .channel2 = modifier, \ + .scan_index = -1, \ + .event_spec = mma8652_freefall_event, \ + .num_event_specs = ARRAY_SIZE(mma8652_freefall_event), \ +} + #define MMA8452_CHANNEL(axis, idx, bits) { \ .type = IIO_ACCEL, \ .modified = 1, \ @@ -822,11 +944,20 @@ static struct attribute_group mma8452_event_attribute_group = { .num_event_specs = ARRAY_SIZE(mma8452_motion_event), \ } +static const struct iio_chan_spec mma8451_channels[] = { + MMA8452_CHANNEL(X, idx_x, 14), + MMA8452_CHANNEL(Y, idx_y, 14), + MMA8452_CHANNEL(Z, idx_z, 14), + IIO_CHAN_SOFT_TIMESTAMP(idx_ts), + MMA8452_FREEFALL_CHANNEL(IIO_MOD_X_AND_Y_AND_Z), +}; + static const struct iio_chan_spec mma8452_channels[] = { MMA8452_CHANNEL(X, idx_x, 12), MMA8452_CHANNEL(Y, idx_y, 12), MMA8452_CHANNEL(Z, idx_z, 12), IIO_CHAN_SOFT_TIMESTAMP(idx_ts), + MMA8452_FREEFALL_CHANNEL(IIO_MOD_X_AND_Y_AND_Z), }; static const struct iio_chan_spec mma8453_channels[] = { @@ -834,6 +965,7 @@ static const struct iio_chan_spec mma8453_channels[] = { MMA8452_CHANNEL(Y, idx_y, 10), MMA8452_CHANNEL(Z, idx_z, 10), IIO_CHAN_SOFT_TIMESTAMP(idx_ts), + MMA8452_FREEFALL_CHANNEL(IIO_MOD_X_AND_Y_AND_Z), }; static const struct iio_chan_spec mma8652_channels[] = { @@ -841,6 +973,7 @@ static const struct iio_chan_spec mma8652_channels[] = { MMA8652_CHANNEL(Y, idx_y, 12), MMA8652_CHANNEL(Z, idx_z, 12), IIO_CHAN_SOFT_TIMESTAMP(idx_ts), + MMA8652_FREEFALL_CHANNEL(IIO_MOD_X_AND_Y_AND_Z), }; static const struct iio_chan_spec mma8653_channels[] = { @@ -848,9 +981,11 @@ static const struct iio_chan_spec mma8653_channels[] = { MMA8652_CHANNEL(Y, idx_y, 10), MMA8652_CHANNEL(Z, idx_z, 10), IIO_CHAN_SOFT_TIMESTAMP(idx_ts), + MMA8652_FREEFALL_CHANNEL(IIO_MOD_X_AND_Y_AND_Z), }; enum { + mma8451, mma8452, mma8453, mma8652, @@ -858,17 +993,34 @@ enum { }; static const struct mma_chip_info mma_chip_info_table[] = { - [mma8452] = { - .chip_id = MMA8452_DEVICE_ID, - .channels = mma8452_channels, - .num_channels = ARRAY_SIZE(mma8452_channels), + [mma8451] = { + .chip_id = MMA8451_DEVICE_ID, + .channels = mma8451_channels, + .num_channels = ARRAY_SIZE(mma8451_channels), /* * Hardware has fullscale of -2G, -4G, -8G corresponding to - * raw value -2048 for 12 bit or -512 for 10 bit. + * raw value -8192 for 14 bit, -2048 for 12 bit or -512 for 10 + * bit. * The userspace interface uses m/s^2 and we declare micro units * So scale factor for 12 bit here is given by: - * g * N * 1000000 / 2048 for N = 2, 4, 8 and g=9.80665 + * g * N * 1000000 / 2048 for N = 2, 4, 8 and g=9.80665 */ + .mma_scales = { {0, 2394}, {0, 4788}, {0, 9577} }, + .ev_cfg = MMA8452_TRANSIENT_CFG, + .ev_cfg_ele = MMA8452_TRANSIENT_CFG_ELE, + .ev_cfg_chan_shift = 1, + .ev_src = MMA8452_TRANSIENT_SRC, + .ev_src_xe = MMA8452_TRANSIENT_SRC_XTRANSE, + .ev_src_ye = MMA8452_TRANSIENT_SRC_YTRANSE, + .ev_src_ze = MMA8452_TRANSIENT_SRC_ZTRANSE, + .ev_ths = MMA8452_TRANSIENT_THS, + .ev_ths_mask = MMA8452_TRANSIENT_THS_MASK, + .ev_count = MMA8452_TRANSIENT_COUNT, + }, + [mma8452] = { + .chip_id = MMA8452_DEVICE_ID, + .channels = mma8452_channels, + .num_channels = ARRAY_SIZE(mma8452_channels), .mma_scales = { {0, 9577}, {0, 19154}, {0, 38307} }, .ev_cfg = MMA8452_TRANSIENT_CFG, .ev_cfg_ele = MMA8452_TRANSIENT_CFG_ELE, @@ -1049,6 +1201,7 @@ static int mma8452_reset(struct i2c_client *client) } static const struct of_device_id mma8452_dt_ids[] = { + { .compatible = "fsl,mma8451", .data = &mma_chip_info_table[mma8451] }, { .compatible = "fsl,mma8452", .data = &mma_chip_info_table[mma8452] }, { .compatible = "fsl,mma8453", .data = &mma_chip_info_table[mma8453] }, { .compatible = "fsl,mma8652", .data = &mma_chip_info_table[mma8652] }, @@ -1085,6 +1238,7 @@ static int mma8452_probe(struct i2c_client *client, return ret; switch (ret) { + case MMA8451_DEVICE_ID: case MMA8452_DEVICE_ID: case MMA8453_DEVICE_ID: case MMA8652_DEVICE_ID: @@ -1190,6 +1344,10 @@ static int mma8452_probe(struct i2c_client *client, if (ret < 0) goto buffer_cleanup; + ret = mma8452_set_freefall_mode(data, false); + if (ret) + return ret; + return 0; buffer_cleanup: diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c index 70f0427..a03a141 100644 --- a/drivers/iio/accel/st_accel_core.c +++ b/drivers/iio/accel/st_accel_core.c @@ -67,6 +67,8 @@ #define ST_ACCEL_1_DRDY_IRQ_ADDR 0x22 #define ST_ACCEL_1_DRDY_IRQ_INT1_MASK 0x10 #define ST_ACCEL_1_DRDY_IRQ_INT2_MASK 0x08 +#define ST_ACCEL_1_IHL_IRQ_ADDR 0x25 +#define ST_ACCEL_1_IHL_IRQ_MASK 0x02 #define ST_ACCEL_1_MULTIREAD_BIT true /* CUSTOM VALUES FOR SENSOR 2 */ @@ -92,6 +94,8 @@ #define ST_ACCEL_2_DRDY_IRQ_ADDR 0x22 #define ST_ACCEL_2_DRDY_IRQ_INT1_MASK 0x02 #define ST_ACCEL_2_DRDY_IRQ_INT2_MASK 0x10 +#define ST_ACCEL_2_IHL_IRQ_ADDR 0x22 +#define ST_ACCEL_2_IHL_IRQ_MASK 0x80 #define ST_ACCEL_2_MULTIREAD_BIT true /* CUSTOM VALUES FOR SENSOR 3 */ @@ -125,6 +129,8 @@ #define ST_ACCEL_3_DRDY_IRQ_ADDR 0x23 #define ST_ACCEL_3_DRDY_IRQ_INT1_MASK 0x80 #define ST_ACCEL_3_DRDY_IRQ_INT2_MASK 0x00 +#define ST_ACCEL_3_IHL_IRQ_ADDR 0x23 +#define ST_ACCEL_3_IHL_IRQ_MASK 0x40 #define ST_ACCEL_3_IG1_EN_ADDR 0x23 #define ST_ACCEL_3_IG1_EN_MASK 0x08 #define ST_ACCEL_3_MULTIREAD_BIT false @@ -169,6 +175,8 @@ #define ST_ACCEL_5_DRDY_IRQ_ADDR 0x22 #define ST_ACCEL_5_DRDY_IRQ_INT1_MASK 0x04 #define ST_ACCEL_5_DRDY_IRQ_INT2_MASK 0x20 +#define ST_ACCEL_5_IHL_IRQ_ADDR 0x22 +#define ST_ACCEL_5_IHL_IRQ_MASK 0x80 #define ST_ACCEL_5_IG1_EN_ADDR 0x21 #define ST_ACCEL_5_IG1_EN_MASK 0x08 #define ST_ACCEL_5_MULTIREAD_BIT false @@ -292,6 +300,8 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = { .addr = ST_ACCEL_1_DRDY_IRQ_ADDR, .mask_int1 = ST_ACCEL_1_DRDY_IRQ_INT1_MASK, .mask_int2 = ST_ACCEL_1_DRDY_IRQ_INT2_MASK, + .addr_ihl = ST_ACCEL_1_IHL_IRQ_ADDR, + .mask_ihl = ST_ACCEL_1_IHL_IRQ_MASK, }, .multi_read_bit = ST_ACCEL_1_MULTIREAD_BIT, .bootime = 2, @@ -355,6 +365,8 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = { .addr = ST_ACCEL_2_DRDY_IRQ_ADDR, .mask_int1 = ST_ACCEL_2_DRDY_IRQ_INT1_MASK, .mask_int2 = ST_ACCEL_2_DRDY_IRQ_INT2_MASK, + .addr_ihl = ST_ACCEL_2_IHL_IRQ_ADDR, + .mask_ihl = ST_ACCEL_2_IHL_IRQ_MASK, }, .multi_read_bit = ST_ACCEL_2_MULTIREAD_BIT, .bootime = 2, @@ -430,6 +442,8 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = { .addr = ST_ACCEL_3_DRDY_IRQ_ADDR, .mask_int1 = ST_ACCEL_3_DRDY_IRQ_INT1_MASK, .mask_int2 = ST_ACCEL_3_DRDY_IRQ_INT2_MASK, + .addr_ihl = ST_ACCEL_3_IHL_IRQ_ADDR, + .mask_ihl = ST_ACCEL_3_IHL_IRQ_MASK, .ig1 = { .en_addr = ST_ACCEL_3_IG1_EN_ADDR, .en_mask = ST_ACCEL_3_IG1_EN_MASK, @@ -537,6 +551,8 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = { .addr = ST_ACCEL_5_DRDY_IRQ_ADDR, .mask_int1 = ST_ACCEL_5_DRDY_IRQ_INT1_MASK, .mask_int2 = ST_ACCEL_5_DRDY_IRQ_INT2_MASK, + .addr_ihl = ST_ACCEL_5_IHL_IRQ_ADDR, + .mask_ihl = ST_ACCEL_5_IHL_IRQ_MASK, }, .multi_read_bit = ST_ACCEL_5_MULTIREAD_BIT, .bootime = 2, /* guess */ diff --git a/drivers/iio/adc/Kconfig b/drivers/iio/adc/Kconfig index 283ded7..b12abe1 100644 --- a/drivers/iio/adc/Kconfig +++ b/drivers/iio/adc/Kconfig @@ -131,6 +131,16 @@ config AT91_ADC To compile this driver as a module, choose M here: the module will be called at91_adc. +config AT91_SAMA5D2_ADC + tristate "Atmel AT91 SAMA5D2 ADC" + depends on ARCH_AT91 || COMPILE_TEST + help + Say yes here to build support for Atmel SAMA5D2 ADC which is + available on SAMA5D2 SoC family. + + To compile this driver as a module, choose M here: the module will be + called at91-sama5d2_adc. + config AXP288_ADC tristate "X-Powers AXP288 ADC driver" depends on MFD_AXP20X @@ -267,11 +277,11 @@ config MCP320X called mcp320x. config MCP3422 - tristate "Microchip Technology MCP3422/3/4/6/7/8 driver" + tristate "Microchip Technology MCP3421/2/3/4/5/6/7/8 driver" depends on I2C help - Say yes here to build support for Microchip Technology's - MCP3422, MCP3423, MCP3424, MCP3426, MCP3427 or MCP3428 + Say yes here to build support for Microchip Technology's MCP3421 + MCP3422, MCP3423, MCP3424, MCP3425, MCP3426, MCP3427 or MCP3428 analog to digital converters. This driver can also be built as a module. If so, the module will be diff --git a/drivers/iio/adc/Makefile b/drivers/iio/adc/Makefile index 6435780..fb57e12 100644 --- a/drivers/iio/adc/Makefile +++ b/drivers/iio/adc/Makefile @@ -14,6 +14,7 @@ obj-$(CONFIG_AD7793) += ad7793.o obj-$(CONFIG_AD7887) += ad7887.o obj-$(CONFIG_AD799X) += ad799x.o obj-$(CONFIG_AT91_ADC) += at91_adc.o +obj-$(CONFIG_AT91_SAMA5D2_ADC) += at91-sama5d2_adc.o obj-$(CONFIG_AXP288_ADC) += axp288_adc.o obj-$(CONFIG_BERLIN2_ADC) += berlin2-adc.o obj-$(CONFIG_CC10001_ADC) += cc10001_adc.o diff --git a/drivers/iio/adc/at91-sama5d2_adc.c b/drivers/iio/adc/at91-sama5d2_adc.c new file mode 100644 index 0000000..dbee13a --- /dev/null +++ b/drivers/iio/adc/at91-sama5d2_adc.c @@ -0,0 +1,508 @@ +/* + * Atmel ADC driver for SAMA5D2 devices and compatible. + * + * Copyright (C) 2015 Atmel, + * 2015 Ludovic Desroches <ludovic.desroches@atmel.com> + * + * This software is licensed under the terms of the GNU General Public + * License version 2, as published by the Free Software Foundation, and + * may be copied, distributed, and modified under those terms. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/bitops.h> +#include <linux/clk.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/module.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/sched.h> +#include <linux/wait.h> +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/regulator/consumer.h> + +/* Control Register */ +#define AT91_SAMA5D2_CR 0x00 +/* Software Reset */ +#define AT91_SAMA5D2_CR_SWRST BIT(0) +/* Start Conversion */ +#define AT91_SAMA5D2_CR_START BIT(1) +/* Touchscreen Calibration */ +#define AT91_SAMA5D2_CR_TSCALIB BIT(2) +/* Comparison Restart */ +#define AT91_SAMA5D2_CR_CMPRST BIT(4) + +/* Mode Register */ +#define AT91_SAMA5D2_MR 0x04 +/* Trigger Selection */ +#define AT91_SAMA5D2_MR_TRGSEL(v) ((v) << 1) +/* ADTRG */ +#define AT91_SAMA5D2_MR_TRGSEL_TRIG0 0 +/* TIOA0 */ +#define AT91_SAMA5D2_MR_TRGSEL_TRIG1 1 +/* TIOA1 */ +#define AT91_SAMA5D2_MR_TRGSEL_TRIG2 2 +/* TIOA2 */ +#define AT91_SAMA5D2_MR_TRGSEL_TRIG3 3 +/* PWM event line 0 */ +#define AT91_SAMA5D2_MR_TRGSEL_TRIG4 4 +/* PWM event line 1 */ +#define AT91_SAMA5D2_MR_TRGSEL_TRIG5 5 +/* TIOA3 */ +#define AT91_SAMA5D2_MR_TRGSEL_TRIG6 6 +/* RTCOUT0 */ +#define AT91_SAMA5D2_MR_TRGSEL_TRIG7 7 +/* Sleep Mode */ +#define AT91_SAMA5D2_MR_SLEEP BIT(5) +/* Fast Wake Up */ +#define AT91_SAMA5D2_MR_FWUP BIT(6) +/* Prescaler Rate Selection */ +#define AT91_SAMA5D2_MR_PRESCAL(v) ((v) << AT91_SAMA5D2_MR_PRESCAL_OFFSET) +#define AT91_SAMA5D2_MR_PRESCAL_OFFSET 8 +#define AT91_SAMA5D2_MR_PRESCAL_MAX 0xff +/* Startup Time */ +#define AT91_SAMA5D2_MR_STARTUP(v) ((v) << 16) +/* Analog Change */ +#define AT91_SAMA5D2_MR_ANACH BIT(23) +/* Tracking Time */ +#define AT91_SAMA5D2_MR_TRACKTIM(v) ((v) << 24) +#define AT91_SAMA5D2_MR_TRACKTIM_MAX 0xff +/* Transfer Time */ +#define AT91_SAMA5D2_MR_TRANSFER(v) ((v) << 28) +#define AT91_SAMA5D2_MR_TRANSFER_MAX 0x3 +/* Use Sequence Enable */ +#define AT91_SAMA5D2_MR_USEQ BIT(31) + +/* Channel Sequence Register 1 */ +#define AT91_SAMA5D2_SEQR1 0x08 +/* Channel Sequence Register 2 */ +#define AT91_SAMA5D2_SEQR2 0x0c +/* Channel Enable Register */ +#define AT91_SAMA5D2_CHER 0x10 +/* Channel Disable Register */ +#define AT91_SAMA5D2_CHDR 0x14 +/* Channel Status Register */ +#define AT91_SAMA5D2_CHSR 0x18 +/* Last Converted Data Register */ +#define AT91_SAMA5D2_LCDR 0x20 +/* Interrupt Enable Register */ +#define AT91_SAMA5D2_IER 0x24 +/* Interrupt Disable Register */ +#define AT91_SAMA5D2_IDR 0x28 +/* Interrupt Mask Register */ +#define AT91_SAMA5D2_IMR 0x2c +/* Interrupt Status Register */ +#define AT91_SAMA5D2_ISR 0x30 +/* Last Channel Trigger Mode Register */ +#define AT91_SAMA5D2_LCTMR 0x34 +/* Last Channel Compare Window Register */ +#define AT91_SAMA5D2_LCCWR 0x38 +/* Overrun Status Register */ +#define AT91_SAMA5D2_OVER 0x3c +/* Extended Mode Register */ +#define AT91_SAMA5D2_EMR 0x40 +/* Compare Window Register */ +#define AT91_SAMA5D2_CWR 0x44 +/* Channel Gain Register */ +#define AT91_SAMA5D2_CGR 0x48 +/* Channel Offset Register */ +#define AT91_SAMA5D2_COR 0x4c +/* Channel Data Register 0 */ +#define AT91_SAMA5D2_CDR0 0x50 +/* Analog Control Register */ +#define AT91_SAMA5D2_ACR 0x94 +/* Touchscreen Mode Register */ +#define AT91_SAMA5D2_TSMR 0xb0 +/* Touchscreen X Position Register */ +#define AT91_SAMA5D2_XPOSR 0xb4 +/* Touchscreen Y Position Register */ +#define AT91_SAMA5D2_YPOSR 0xb8 +/* Touchscreen Pressure Register */ +#define AT91_SAMA5D2_PRESSR 0xbc +/* Trigger Register */ +#define AT91_SAMA5D2_TRGR 0xc0 +/* Correction Select Register */ +#define AT91_SAMA5D2_COSR 0xd0 +/* Correction Value Register */ +#define AT91_SAMA5D2_CVR 0xd4 +/* Channel Error Correction Register */ +#define AT91_SAMA5D2_CECR 0xd8 +/* Write Protection Mode Register */ +#define AT91_SAMA5D2_WPMR 0xe4 +/* Write Protection Status Register */ +#define AT91_SAMA5D2_WPSR 0xe8 +/* Version Register */ +#define AT91_SAMA5D2_VERSION 0xfc + +#define AT91_AT91_SAMA5D2_CHAN(num, addr) \ + { \ + .type = IIO_VOLTAGE, \ + .channel = num, \ + .address = addr, \ + .scan_type = { \ + .sign = 'u', \ + .realbits = 12, \ + }, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), \ + .info_mask_shared_by_all = BIT(IIO_CHAN_INFO_SAMP_FREQ),\ + .datasheet_name = "CH"#num, \ + .indexed = 1, \ + } + +#define at91_adc_readl(st, reg) readl_relaxed(st->base + reg) +#define at91_adc_writel(st, reg, val) writel_relaxed(val, st->base + reg) + +struct at91_adc_soc_info { + unsigned startup_time; + unsigned min_sample_rate; + unsigned max_sample_rate; +}; + +struct at91_adc_state { + void __iomem *base; + int irq; + struct clk *per_clk; + struct regulator *reg; + struct regulator *vref; + int vref_uv; + const struct iio_chan_spec *chan; + bool conversion_done; + u32 conversion_value; + struct at91_adc_soc_info soc_info; + wait_queue_head_t wq_data_available; + /* + * lock to prevent concurrent 'single conversion' requests through + * sysfs. + */ + struct mutex lock; +}; + +static const struct iio_chan_spec at91_adc_channels[] = { + AT91_AT91_SAMA5D2_CHAN(0, 0x50), + AT91_AT91_SAMA5D2_CHAN(1, 0x54), + AT91_AT91_SAMA5D2_CHAN(2, 0x58), + AT91_AT91_SAMA5D2_CHAN(3, 0x5c), + AT91_AT91_SAMA5D2_CHAN(4, 0x60), + AT91_AT91_SAMA5D2_CHAN(5, 0x64), + AT91_AT91_SAMA5D2_CHAN(6, 0x68), + AT91_AT91_SAMA5D2_CHAN(7, 0x6c), + AT91_AT91_SAMA5D2_CHAN(8, 0x70), + AT91_AT91_SAMA5D2_CHAN(9, 0x74), + AT91_AT91_SAMA5D2_CHAN(10, 0x78), + AT91_AT91_SAMA5D2_CHAN(11, 0x7c), +}; + +static unsigned at91_adc_startup_time(unsigned startup_time_min, + unsigned adc_clk_khz) +{ + const unsigned startup_lookup[] = { + 0, 8, 16, 24, + 64, 80, 96, 112, + 512, 576, 640, 704, + 768, 832, 896, 960 + }; + unsigned ticks_min, i; + + /* + * Since the adc frequency is checked before, there is no reason + * to not meet the startup time constraint. + */ + + ticks_min = startup_time_min * adc_clk_khz / 1000; + for (i = 0; i < ARRAY_SIZE(startup_lookup); i++) + if (startup_lookup[i] > ticks_min) + break; + + return i; +} + +static void at91_adc_setup_samp_freq(struct at91_adc_state *st, unsigned freq) +{ + struct iio_dev *indio_dev = iio_priv_to_dev(st); + unsigned f_per, prescal, startup; + + f_per = clk_get_rate(st->per_clk); + prescal = (f_per / (2 * freq)) - 1; + + startup = at91_adc_startup_time(st->soc_info.startup_time, + freq / 1000); + + at91_adc_writel(st, AT91_SAMA5D2_MR, + AT91_SAMA5D2_MR_TRANSFER(2) + | AT91_SAMA5D2_MR_STARTUP(startup) + | AT91_SAMA5D2_MR_PRESCAL(prescal)); + + dev_dbg(&indio_dev->dev, "freq: %u, startup: %u, prescal: %u\n", + freq, startup, prescal); +} + +static unsigned at91_adc_get_sample_freq(struct at91_adc_state *st) +{ + unsigned f_adc, f_per = clk_get_rate(st->per_clk); + unsigned mr, prescal; + + mr = at91_adc_readl(st, AT91_SAMA5D2_MR); + prescal = (mr >> AT91_SAMA5D2_MR_PRESCAL_OFFSET) + & AT91_SAMA5D2_MR_PRESCAL_MAX; + f_adc = f_per / (2 * (prescal + 1)); + + return f_adc; +} + +static irqreturn_t at91_adc_interrupt(int irq, void *private) +{ + struct iio_dev *indio = private; + struct at91_adc_state *st = iio_priv(indio); + u32 status = at91_adc_readl(st, AT91_SAMA5D2_ISR); + u32 imr = at91_adc_readl(st, AT91_SAMA5D2_IMR); + + if (status & imr) { + st->conversion_value = at91_adc_readl(st, st->chan->address); + st->conversion_done = true; + wake_up_interruptible(&st->wq_data_available); + return IRQ_HANDLED; + } + + return IRQ_NONE; +} + +static int at91_adc_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct at91_adc_state *st = iio_priv(indio_dev); + int ret; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + mutex_lock(&st->lock); + + st->chan = chan; + + at91_adc_writel(st, AT91_SAMA5D2_CHER, BIT(chan->channel)); + at91_adc_writel(st, AT91_SAMA5D2_IER, BIT(chan->channel)); + at91_adc_writel(st, AT91_SAMA5D2_CR, AT91_SAMA5D2_CR_START); + + ret = wait_event_interruptible_timeout(st->wq_data_available, + st->conversion_done, + msecs_to_jiffies(1000)); + if (ret == 0) + ret = -ETIMEDOUT; + + if (ret > 0) { + *val = st->conversion_value; + ret = IIO_VAL_INT; + st->conversion_done = false; + } + + at91_adc_writel(st, AT91_SAMA5D2_IDR, BIT(chan->channel)); + at91_adc_writel(st, AT91_SAMA5D2_CHDR, BIT(chan->channel)); + + mutex_unlock(&st->lock); + return ret; + + case IIO_CHAN_INFO_SCALE: + *val = st->vref_uv / 1000; + *val2 = chan->scan_type.realbits; + return IIO_VAL_FRACTIONAL_LOG2; + + case IIO_CHAN_INFO_SAMP_FREQ: + *val = at91_adc_get_sample_freq(st); + return IIO_VAL_INT; + + default: + return -EINVAL; + } +} + +static int at91_adc_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, int val2, long mask) +{ + struct at91_adc_state *st = iio_priv(indio_dev); + + if (mask != IIO_CHAN_INFO_SAMP_FREQ) + return -EINVAL; + + if (val < st->soc_info.min_sample_rate || + val > st->soc_info.max_sample_rate) + return -EINVAL; + + at91_adc_setup_samp_freq(st, val); + + return 0; +} + +static const struct iio_info at91_adc_info = { + .read_raw = &at91_adc_read_raw, + .write_raw = &at91_adc_write_raw, + .driver_module = THIS_MODULE, +}; + +static int at91_adc_probe(struct platform_device *pdev) +{ + struct iio_dev *indio_dev; + struct at91_adc_state *st; + struct resource *res; + int ret; + + indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*st)); + if (!indio_dev) + return -ENOMEM; + + indio_dev->dev.parent = &pdev->dev; + indio_dev->name = dev_name(&pdev->dev); + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->info = &at91_adc_info; + indio_dev->channels = at91_adc_channels; + indio_dev->num_channels = ARRAY_SIZE(at91_adc_channels); + + st = iio_priv(indio_dev); + + ret = of_property_read_u32(pdev->dev.of_node, + "atmel,min-sample-rate-hz", + &st->soc_info.min_sample_rate); + if (ret) { + dev_err(&pdev->dev, + "invalid or missing value for atmel,min-sample-rate-hz\n"); + return ret; + } + + ret = of_property_read_u32(pdev->dev.of_node, + "atmel,max-sample-rate-hz", + &st->soc_info.max_sample_rate); + if (ret) { + dev_err(&pdev->dev, + "invalid or missing value for atmel,max-sample-rate-hz\n"); + return ret; + } + + ret = of_property_read_u32(pdev->dev.of_node, "atmel,startup-time-ms", + &st->soc_info.startup_time); + if (ret) { + dev_err(&pdev->dev, + "invalid or missing value for atmel,startup-time-ms\n"); + return ret; + } + + init_waitqueue_head(&st->wq_data_available); + mutex_init(&st->lock); + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!res) + return -EINVAL; + + st->base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(st->base)) + return PTR_ERR(st->base); + + st->irq = platform_get_irq(pdev, 0); + if (st->irq <= 0) { + if (!st->irq) + st->irq = -ENXIO; + + return st->irq; + } + + st->per_clk = devm_clk_get(&pdev->dev, "adc_clk"); + if (IS_ERR(st->per_clk)) + return PTR_ERR(st->per_clk); + + st->reg = devm_regulator_get(&pdev->dev, "vddana"); + if (IS_ERR(st->reg)) + return PTR_ERR(st->reg); + + st->vref = devm_regulator_get(&pdev->dev, "vref"); + if (IS_ERR(st->vref)) + return PTR_ERR(st->vref); + + ret = devm_request_irq(&pdev->dev, st->irq, at91_adc_interrupt, 0, + pdev->dev.driver->name, indio_dev); + if (ret) + return ret; + + ret = regulator_enable(st->reg); + if (ret) + return ret; + + ret = regulator_enable(st->vref); + if (ret) + goto reg_disable; + + st->vref_uv = regulator_get_voltage(st->vref); + if (st->vref_uv <= 0) { + ret = -EINVAL; + goto vref_disable; + } + + at91_adc_writel(st, AT91_SAMA5D2_CR, AT91_SAMA5D2_CR_SWRST); + at91_adc_writel(st, AT91_SAMA5D2_IDR, 0xffffffff); + + at91_adc_setup_samp_freq(st, st->soc_info.min_sample_rate); + + ret = clk_prepare_enable(st->per_clk); + if (ret) + goto vref_disable; + + ret = iio_device_register(indio_dev); + if (ret < 0) + goto per_clk_disable_unprepare; + + dev_info(&pdev->dev, "version: %x\n", + readl_relaxed(st->base + AT91_SAMA5D2_VERSION)); + + return 0; + +per_clk_disable_unprepare: + clk_disable_unprepare(st->per_clk); +vref_disable: + regulator_disable(st->vref); +reg_disable: + regulator_disable(st->reg); + return ret; +} + +static int at91_adc_remove(struct platform_device *pdev) +{ + struct iio_dev *indio_dev = platform_get_drvdata(pdev); + struct at91_adc_state *st = iio_priv(indio_dev); + + iio_device_unregister(indio_dev); + + clk_disable_unprepare(st->per_clk); + + regulator_disable(st->vref); + regulator_disable(st->reg); + + return 0; +} + +static const struct of_device_id at91_adc_dt_match[] = { + { + .compatible = "atmel,sama5d2-adc", + }, { + /* sentinel */ + } +}; +MODULE_DEVICE_TABLE(of, at91_adc_dt_match); + +static struct platform_driver at91_adc_driver = { + .probe = at91_adc_probe, + .remove = at91_adc_remove, + .driver = { + .name = "at91-sama5d2_adc", + .of_match_table = at91_adc_dt_match, + }, +}; +module_platform_driver(at91_adc_driver) + +MODULE_AUTHOR("Ludovic Desroches <ludovic.desroches@atmel.com>"); +MODULE_DESCRIPTION("Atmel AT91 SAMA5D2 ADC"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/adc/axp288_adc.c b/drivers/iio/adc/axp288_adc.c index 0c904ed..7fd2494 100644 --- a/drivers/iio/adc/axp288_adc.c +++ b/drivers/iio/adc/axp288_adc.c @@ -46,7 +46,7 @@ struct axp288_adc_info { struct regmap *regmap; }; -static const struct iio_chan_spec const axp288_adc_channels[] = { +static const struct iio_chan_spec axp288_adc_channels[] = { { .indexed = 1, .type = IIO_TEMP, diff --git a/drivers/iio/adc/mcp320x.c b/drivers/iio/adc/mcp320x.c index d1c05f6..a850ca7 100644 --- a/drivers/iio/adc/mcp320x.c +++ b/drivers/iio/adc/mcp320x.c @@ -187,26 +187,27 @@ out: .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) \ } -#define MCP320X_VOLTAGE_CHANNEL_DIFF(num) \ +#define MCP320X_VOLTAGE_CHANNEL_DIFF(chan1, chan2) \ { \ .type = IIO_VOLTAGE, \ .indexed = 1, \ - .channel = (num * 2), \ - .channel2 = (num * 2 + 1), \ - .address = (num * 2), \ + .channel = (chan1), \ + .channel2 = (chan2), \ + .address = (chan1), \ .differential = 1, \ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) \ } static const struct iio_chan_spec mcp3201_channels[] = { - MCP320X_VOLTAGE_CHANNEL_DIFF(0), + MCP320X_VOLTAGE_CHANNEL_DIFF(0, 1), }; static const struct iio_chan_spec mcp3202_channels[] = { MCP320X_VOLTAGE_CHANNEL(0), MCP320X_VOLTAGE_CHANNEL(1), - MCP320X_VOLTAGE_CHANNEL_DIFF(0), + MCP320X_VOLTAGE_CHANNEL_DIFF(0, 1), + MCP320X_VOLTAGE_CHANNEL_DIFF(1, 0), }; static const struct iio_chan_spec mcp3204_channels[] = { @@ -214,8 +215,10 @@ static const struct iio_chan_spec mcp3204_channels[] = { MCP320X_VOLTAGE_CHANNEL(1), MCP320X_VOLTAGE_CHANNEL(2), MCP320X_VOLTAGE_CHANNEL(3), - MCP320X_VOLTAGE_CHANNEL_DIFF(0), - MCP320X_VOLTAGE_CHANNEL_DIFF(1), + MCP320X_VOLTAGE_CHANNEL_DIFF(0, 1), + MCP320X_VOLTAGE_CHANNEL_DIFF(1, 0), + MCP320X_VOLTAGE_CHANNEL_DIFF(2, 3), + MCP320X_VOLTAGE_CHANNEL_DIFF(3, 2), }; static const struct iio_chan_spec mcp3208_channels[] = { @@ -227,10 +230,14 @@ static const struct iio_chan_spec mcp3208_channels[] = { MCP320X_VOLTAGE_CHANNEL(5), MCP320X_VOLTAGE_CHANNEL(6), MCP320X_VOLTAGE_CHANNEL(7), - MCP320X_VOLTAGE_CHANNEL_DIFF(0), - MCP320X_VOLTAGE_CHANNEL_DIFF(1), - MCP320X_VOLTAGE_CHANNEL_DIFF(2), - MCP320X_VOLTAGE_CHANNEL_DIFF(3), + MCP320X_VOLTAGE_CHANNEL_DIFF(0, 1), + MCP320X_VOLTAGE_CHANNEL_DIFF(1, 0), + MCP320X_VOLTAGE_CHANNEL_DIFF(2, 3), + MCP320X_VOLTAGE_CHANNEL_DIFF(3, 2), + MCP320X_VOLTAGE_CHANNEL_DIFF(4, 5), + MCP320X_VOLTAGE_CHANNEL_DIFF(5, 4), + MCP320X_VOLTAGE_CHANNEL_DIFF(6, 7), + MCP320X_VOLTAGE_CHANNEL_DIFF(7, 6), }; static const struct iio_info mcp320x_info = { diff --git a/drivers/iio/adc/mcp3422.c b/drivers/iio/adc/mcp3422.c index 6eca7ae..ebad83e 100644 --- a/drivers/iio/adc/mcp3422.c +++ b/drivers/iio/adc/mcp3422.c @@ -1,11 +1,12 @@ /* - * mcp3422.c - driver for the Microchip mcp3422/3/4/6/7/8 chip family + * mcp3422.c - driver for the Microchip mcp3421/2/3/4/5/6/7/8 chip family * * Copyright (C) 2013, Angelo Compagnucci * Author: Angelo Compagnucci <angelo.compagnucci@gmail.com> * * Datasheet: http://ww1.microchip.com/downloads/en/devicedoc/22088b.pdf * http://ww1.microchip.com/downloads/en/DeviceDoc/22226a.pdf + * http://ww1.microchip.com/downloads/en/DeviceDoc/22072b.pdf * * This driver exports the value of analog input voltage to sysfs, the * voltage unit is nV. @@ -357,6 +358,7 @@ static int mcp3422_probe(struct i2c_client *client, switch (adc->id) { case 1: + case 5: indio_dev->channels = mcp3421_channels; indio_dev->num_channels = ARRAY_SIZE(mcp3421_channels); break; @@ -395,6 +397,7 @@ static const struct i2c_device_id mcp3422_id[] = { { "mcp3422", 2 }, { "mcp3423", 3 }, { "mcp3424", 4 }, + { "mcp3425", 5 }, { "mcp3426", 6 }, { "mcp3427", 7 }, { "mcp3428", 8 }, @@ -421,5 +424,5 @@ static struct i2c_driver mcp3422_driver = { module_i2c_driver(mcp3422_driver); MODULE_AUTHOR("Angelo Compagnucci <angelo.compagnucci@gmail.com>"); -MODULE_DESCRIPTION("Microchip mcp3422/3/4/6/7/8 driver"); +MODULE_DESCRIPTION("Microchip mcp3421/2/3/4/5/6/7/8 driver"); MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/chemical/Kconfig b/drivers/iio/chemical/Kconfig index f16de61..ce7cd1370 100644 --- a/drivers/iio/chemical/Kconfig +++ b/drivers/iio/chemical/Kconfig @@ -4,6 +4,19 @@ menu "Chemical Sensors" +config ATLAS_PH_SENSOR + tristate "Atlas Scientific OEM pH-SM sensor" + depends on I2C + select REGMAP_I2C + select IIO_BUFFER + select IIO_TRIGGERED_BUFFER + help + Say Y here to build I2C interface support for the Atlas + Scientific OEM pH-SM sensor. + + To compile this driver as module, choose M here: the + module will be called atlas-ph-sensor. + config IAQCORE tristate "AMS iAQ-Core VOC sensors" depends on I2C diff --git a/drivers/iio/chemical/Makefile b/drivers/iio/chemical/Makefile index 167861f..b02202b 100644 --- a/drivers/iio/chemical/Makefile +++ b/drivers/iio/chemical/Makefile @@ -3,5 +3,6 @@ # # When adding new entries keep the list in alphabetical order +obj-$(CONFIG_ATLAS_PH_SENSOR) += atlas-ph-sensor.o obj-$(CONFIG_IAQCORE) += ams-iaq-core.o obj-$(CONFIG_VZ89X) += vz89x.o diff --git a/drivers/iio/chemical/atlas-ph-sensor.c b/drivers/iio/chemical/atlas-ph-sensor.c new file mode 100644 index 0000000..06cd49c --- /dev/null +++ b/drivers/iio/chemical/atlas-ph-sensor.c @@ -0,0 +1,511 @@ +/* + * atlas-ph-sensor.c - Support for Atlas Scientific OEM pH-SM sensor + * + * Copyright (C) 2015 Matt Ranostay <mranostay@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/mutex.h> +#include <linux/err.h> +#include <linux/irq.h> +#include <linux/irq_work.h> +#include <linux/gpio.h> +#include <linux/i2c.h> +#include <linux/regmap.h> +#include <linux/iio/iio.h> +#include <linux/iio/buffer.h> +#include <linux/iio/trigger.h> +#include <linux/iio/trigger_consumer.h> +#include <linux/iio/triggered_buffer.h> +#include <linux/pm_runtime.h> + +#define ATLAS_REGMAP_NAME "atlas_ph_regmap" +#define ATLAS_DRV_NAME "atlas_ph" + +#define ATLAS_REG_DEV_TYPE 0x00 +#define ATLAS_REG_DEV_VERSION 0x01 + +#define ATLAS_REG_INT_CONTROL 0x04 +#define ATLAS_REG_INT_CONTROL_EN BIT(3) + +#define ATLAS_REG_PWR_CONTROL 0x06 + +#define ATLAS_REG_CALIB_STATUS 0x0d +#define ATLAS_REG_CALIB_STATUS_MASK 0x07 +#define ATLAS_REG_CALIB_STATUS_LOW BIT(0) +#define ATLAS_REG_CALIB_STATUS_MID BIT(1) +#define ATLAS_REG_CALIB_STATUS_HIGH BIT(2) + +#define ATLAS_REG_TEMP_DATA 0x0e +#define ATLAS_REG_PH_DATA 0x16 + +#define ATLAS_PH_INT_TIME_IN_US 450000 + +struct atlas_data { + struct i2c_client *client; + struct iio_trigger *trig; + struct regmap *regmap; + struct irq_work work; + + __be32 buffer[4]; /* 32-bit pH data + 32-bit pad + 64-bit timestamp */ +}; + +static const struct regmap_range atlas_volatile_ranges[] = { + regmap_reg_range(ATLAS_REG_INT_CONTROL, ATLAS_REG_INT_CONTROL), + regmap_reg_range(ATLAS_REG_CALIB_STATUS, ATLAS_REG_CALIB_STATUS), + regmap_reg_range(ATLAS_REG_TEMP_DATA, ATLAS_REG_TEMP_DATA + 4), + regmap_reg_range(ATLAS_REG_PH_DATA, ATLAS_REG_PH_DATA + 4), +}; + +static const struct regmap_access_table atlas_volatile_table = { + .yes_ranges = atlas_volatile_ranges, + .n_yes_ranges = ARRAY_SIZE(atlas_volatile_ranges), +}; + +static const struct regmap_config atlas_regmap_config = { + .name = ATLAS_REGMAP_NAME, + + .reg_bits = 8, + .val_bits = 8, + + .volatile_table = &atlas_volatile_table, + .max_register = ATLAS_REG_PH_DATA + 4, + .cache_type = REGCACHE_FLAT, +}; + +static const struct iio_chan_spec atlas_channels[] = { + { + .type = IIO_PH, + .info_mask_separate = + BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE), + .scan_index = 0, + .scan_type = { + .sign = 'u', + .realbits = 32, + .storagebits = 32, + .endianness = IIO_BE, + }, + }, + IIO_CHAN_SOFT_TIMESTAMP(1), + { + .type = IIO_TEMP, + .address = ATLAS_REG_TEMP_DATA, + .info_mask_separate = + BIT(IIO_CHAN_INFO_RAW) | BIT(IIO_CHAN_INFO_SCALE), + .output = 1, + .scan_index = -1 + }, +}; + +static int atlas_set_powermode(struct atlas_data *data, int on) +{ + return regmap_write(data->regmap, ATLAS_REG_PWR_CONTROL, on); +} + +static int atlas_set_interrupt(struct atlas_data *data, bool state) +{ + return regmap_update_bits(data->regmap, ATLAS_REG_INT_CONTROL, + ATLAS_REG_INT_CONTROL_EN, + state ? ATLAS_REG_INT_CONTROL_EN : 0); +} + +static int atlas_buffer_postenable(struct iio_dev *indio_dev) +{ + struct atlas_data *data = iio_priv(indio_dev); + int ret; + + ret = iio_triggered_buffer_postenable(indio_dev); + if (ret) + return ret; + + ret = pm_runtime_get_sync(&data->client->dev); + if (ret < 0) { + pm_runtime_put_noidle(&data->client->dev); + return ret; + } + + return atlas_set_interrupt(data, true); +} + +static int atlas_buffer_predisable(struct iio_dev *indio_dev) +{ + struct atlas_data *data = iio_priv(indio_dev); + int ret; + + ret = iio_triggered_buffer_predisable(indio_dev); + if (ret) + return ret; + + ret = atlas_set_interrupt(data, false); + if (ret) + return ret; + + pm_runtime_mark_last_busy(&data->client->dev); + return pm_runtime_put_autosuspend(&data->client->dev); +} + +static const struct iio_trigger_ops atlas_interrupt_trigger_ops = { + .owner = THIS_MODULE, +}; + +static const struct iio_buffer_setup_ops atlas_buffer_setup_ops = { + .postenable = atlas_buffer_postenable, + .predisable = atlas_buffer_predisable, +}; + +static void atlas_work_handler(struct irq_work *work) +{ + struct atlas_data *data = container_of(work, struct atlas_data, work); + + iio_trigger_poll(data->trig); +} + +static irqreturn_t atlas_trigger_handler(int irq, void *private) +{ + struct iio_poll_func *pf = private; + struct iio_dev *indio_dev = pf->indio_dev; + struct atlas_data *data = iio_priv(indio_dev); + int ret; + + ret = i2c_smbus_read_i2c_block_data(data->client, ATLAS_REG_PH_DATA, + sizeof(data->buffer[0]), (u8 *) &data->buffer); + + if (ret > 0) + iio_push_to_buffers_with_timestamp(indio_dev, data->buffer, + iio_get_time_ns()); + + iio_trigger_notify_done(indio_dev->trig); + + return IRQ_HANDLED; +} + +static irqreturn_t atlas_interrupt_handler(int irq, void *private) +{ + struct iio_dev *indio_dev = private; + struct atlas_data *data = iio_priv(indio_dev); + + irq_work_queue(&data->work); + + return IRQ_HANDLED; +} + +static int atlas_read_ph_measurement(struct atlas_data *data, __be32 *val) +{ + struct device *dev = &data->client->dev; + int suspended = pm_runtime_suspended(dev); + int ret; + + ret = pm_runtime_get_sync(dev); + if (ret < 0) { + pm_runtime_put_noidle(dev); + return ret; + } + + if (suspended) + usleep_range(ATLAS_PH_INT_TIME_IN_US, + ATLAS_PH_INT_TIME_IN_US + 100000); + + ret = regmap_bulk_read(data->regmap, ATLAS_REG_PH_DATA, + (u8 *) val, sizeof(*val)); + + pm_runtime_mark_last_busy(dev); + pm_runtime_put_autosuspend(dev); + + return ret; +} + +static int atlas_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, int *val2, long mask) +{ + struct atlas_data *data = iio_priv(indio_dev); + + switch (mask) { + case IIO_CHAN_INFO_RAW: { + int ret; + __be32 reg; + + switch (chan->type) { + case IIO_TEMP: + ret = regmap_bulk_read(data->regmap, chan->address, + (u8 *) ®, sizeof(reg)); + break; + case IIO_PH: + mutex_lock(&indio_dev->mlock); + + if (iio_buffer_enabled(indio_dev)) + ret = -EBUSY; + else + ret = atlas_read_ph_measurement(data, ®); + + mutex_unlock(&indio_dev->mlock); + break; + default: + ret = -EINVAL; + } + + if (!ret) { + *val = be32_to_cpu(reg); + ret = IIO_VAL_INT; + } + return ret; + } + case IIO_CHAN_INFO_SCALE: + switch (chan->type) { + case IIO_TEMP: + *val = 1; /* 0.01 */ + *val2 = 100; + break; + case IIO_PH: + *val = 1; /* 0.001 */ + *val2 = 1000; + break; + default: + return -EINVAL; + } + return IIO_VAL_FRACTIONAL; + } + + return -EINVAL; +} + +static int atlas_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, int val2, long mask) +{ + struct atlas_data *data = iio_priv(indio_dev); + __be32 reg = cpu_to_be32(val); + + if (val2 != 0 || val < 0 || val > 20000) + return -EINVAL; + + if (mask != IIO_CHAN_INFO_RAW || chan->type != IIO_TEMP) + return -EINVAL; + + return regmap_bulk_write(data->regmap, chan->address, + ®, sizeof(reg)); +} + +static const struct iio_info atlas_info = { + .driver_module = THIS_MODULE, + .read_raw = atlas_read_raw, + .write_raw = atlas_write_raw, +}; + +static int atlas_check_calibration(struct atlas_data *data) +{ + struct device *dev = &data->client->dev; + int ret; + unsigned int val; + + ret = regmap_read(data->regmap, ATLAS_REG_CALIB_STATUS, &val); + if (ret) + return ret; + + if (!(val & ATLAS_REG_CALIB_STATUS_MASK)) { + dev_warn(dev, "device has not been calibrated\n"); + return 0; + } + + if (!(val & ATLAS_REG_CALIB_STATUS_LOW)) + dev_warn(dev, "device missing low point calibration\n"); + + if (!(val & ATLAS_REG_CALIB_STATUS_MID)) + dev_warn(dev, "device missing mid point calibration\n"); + + if (!(val & ATLAS_REG_CALIB_STATUS_HIGH)) + dev_warn(dev, "device missing high point calibration\n"); + + return 0; +}; + +static int atlas_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + struct atlas_data *data; + struct iio_trigger *trig; + struct iio_dev *indio_dev; + int ret; + + indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); + if (!indio_dev) + return -ENOMEM; + + indio_dev->info = &atlas_info; + indio_dev->name = ATLAS_DRV_NAME; + indio_dev->channels = atlas_channels; + indio_dev->num_channels = ARRAY_SIZE(atlas_channels); + indio_dev->modes = INDIO_BUFFER_SOFTWARE | INDIO_DIRECT_MODE; + indio_dev->dev.parent = &client->dev; + + trig = devm_iio_trigger_alloc(&client->dev, "%s-dev%d", + indio_dev->name, indio_dev->id); + + if (!trig) + return -ENOMEM; + + data = iio_priv(indio_dev); + data->client = client; + data->trig = trig; + trig->dev.parent = indio_dev->dev.parent; + trig->ops = &atlas_interrupt_trigger_ops; + iio_trigger_set_drvdata(trig, indio_dev); + + i2c_set_clientdata(client, indio_dev); + + data->regmap = devm_regmap_init_i2c(client, &atlas_regmap_config); + if (IS_ERR(data->regmap)) { + dev_err(&client->dev, "regmap initialization failed\n"); + return PTR_ERR(data->regmap); + } + + ret = pm_runtime_set_active(&client->dev); + if (ret) + return ret; + + if (client->irq <= 0) { + dev_err(&client->dev, "no valid irq defined\n"); + return -EINVAL; + } + + ret = atlas_check_calibration(data); + if (ret) + return ret; + + ret = iio_trigger_register(trig); + if (ret) { + dev_err(&client->dev, "failed to register trigger\n"); + return ret; + } + + ret = iio_triggered_buffer_setup(indio_dev, &iio_pollfunc_store_time, + &atlas_trigger_handler, &atlas_buffer_setup_ops); + if (ret) { + dev_err(&client->dev, "cannot setup iio trigger\n"); + goto unregister_trigger; + } + + init_irq_work(&data->work, atlas_work_handler); + + /* interrupt pin toggles on new conversion */ + ret = devm_request_threaded_irq(&client->dev, client->irq, + NULL, atlas_interrupt_handler, + IRQF_TRIGGER_RISING | + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, + "atlas_irq", + indio_dev); + if (ret) { + dev_err(&client->dev, "request irq (%d) failed\n", client->irq); + goto unregister_buffer; + } + + ret = atlas_set_powermode(data, 1); + if (ret) { + dev_err(&client->dev, "cannot power device on"); + goto unregister_buffer; + } + + pm_runtime_enable(&client->dev); + pm_runtime_set_autosuspend_delay(&client->dev, 2500); + pm_runtime_use_autosuspend(&client->dev); + + ret = iio_device_register(indio_dev); + if (ret) { + dev_err(&client->dev, "unable to register device\n"); + goto unregister_pm; + } + + return 0; + +unregister_pm: + pm_runtime_disable(&client->dev); + atlas_set_powermode(data, 0); + +unregister_buffer: + iio_triggered_buffer_cleanup(indio_dev); + +unregister_trigger: + iio_trigger_unregister(data->trig); + + return ret; +} + +static int atlas_remove(struct i2c_client *client) +{ + struct iio_dev *indio_dev = i2c_get_clientdata(client); + struct atlas_data *data = iio_priv(indio_dev); + + iio_device_unregister(indio_dev); + iio_triggered_buffer_cleanup(indio_dev); + iio_trigger_unregister(data->trig); + + pm_runtime_disable(&client->dev); + pm_runtime_set_suspended(&client->dev); + pm_runtime_put_noidle(&client->dev); + + return atlas_set_powermode(data, 0); +} + +#ifdef CONFIG_PM +static int atlas_runtime_suspend(struct device *dev) +{ + struct atlas_data *data = + iio_priv(i2c_get_clientdata(to_i2c_client(dev))); + + return atlas_set_powermode(data, 0); +} + +static int atlas_runtime_resume(struct device *dev) +{ + struct atlas_data *data = + iio_priv(i2c_get_clientdata(to_i2c_client(dev))); + + return atlas_set_powermode(data, 1); +} +#endif + +static const struct dev_pm_ops atlas_pm_ops = { + SET_RUNTIME_PM_OPS(atlas_runtime_suspend, + atlas_runtime_resume, NULL) +}; + +static const struct i2c_device_id atlas_id[] = { + { "atlas-ph-sm", 0 }, + {} +}; +MODULE_DEVICE_TABLE(i2c, atlas_id); + +static const struct of_device_id atlas_dt_ids[] = { + { .compatible = "atlas,ph-sm" }, + { } +}; +MODULE_DEVICE_TABLE(of, atlas_dt_ids); + +static struct i2c_driver atlas_driver = { + .driver = { + .name = ATLAS_DRV_NAME, + .of_match_table = of_match_ptr(atlas_dt_ids), + .pm = &atlas_pm_ops, + }, + .probe = atlas_probe, + .remove = atlas_remove, + .id_table = atlas_id, +}; +module_i2c_driver(atlas_driver); + +MODULE_AUTHOR("Matt Ranostay <mranostay@gmail.com>"); +MODULE_DESCRIPTION("Atlas Scientific pH-SM sensor"); +MODULE_LICENSE("GPL"); diff --git a/drivers/iio/common/st_sensors/st_sensors_core.c b/drivers/iio/common/st_sensors/st_sensors_core.c index 8447c31..f5a2d44 100644 --- a/drivers/iio/common/st_sensors/st_sensors_core.c +++ b/drivers/iio/common/st_sensors/st_sensors_core.c @@ -18,13 +18,15 @@ #include <asm/unaligned.h> #include <linux/iio/common/st_sensors.h> +#include "st_sensors_core.h" + static inline u32 st_sensors_get_unaligned_le24(const u8 *p) { return (s32)((p[0] | p[1] << 8 | p[2] << 16) << 8) >> 8; } -static int st_sensors_write_data_with_mask(struct iio_dev *indio_dev, - u8 reg_addr, u8 mask, u8 data) +int st_sensors_write_data_with_mask(struct iio_dev *indio_dev, + u8 reg_addr, u8 mask, u8 data) { int err; u8 new_data; diff --git a/drivers/iio/common/st_sensors/st_sensors_core.h b/drivers/iio/common/st_sensors/st_sensors_core.h new file mode 100644 index 0000000..cd88098 --- /dev/null +++ b/drivers/iio/common/st_sensors/st_sensors_core.h @@ -0,0 +1,8 @@ +/* + * Local functions in the ST Sensors core + */ +#ifndef __ST_SENSORS_CORE_H +#define __ST_SENSORS_CORE_H +int st_sensors_write_data_with_mask(struct iio_dev *indio_dev, + u8 reg_addr, u8 mask, u8 data); +#endif diff --git a/drivers/iio/common/st_sensors/st_sensors_trigger.c b/drivers/iio/common/st_sensors/st_sensors_trigger.c index 3e90704..6a8c983 100644 --- a/drivers/iio/common/st_sensors/st_sensors_trigger.c +++ b/drivers/iio/common/st_sensors/st_sensors_trigger.c @@ -14,32 +14,65 @@ #include <linux/iio/iio.h> #include <linux/iio/trigger.h> #include <linux/interrupt.h> - #include <linux/iio/common/st_sensors.h> - +#include "st_sensors_core.h" int st_sensors_allocate_trigger(struct iio_dev *indio_dev, const struct iio_trigger_ops *trigger_ops) { - int err; + int err, irq; struct st_sensor_data *sdata = iio_priv(indio_dev); + unsigned long irq_trig; sdata->trig = iio_trigger_alloc("%s-trigger", indio_dev->name); if (sdata->trig == NULL) { - err = -ENOMEM; dev_err(&indio_dev->dev, "failed to allocate iio trigger.\n"); - goto iio_trigger_alloc_error; + return -ENOMEM; } - err = request_threaded_irq(sdata->get_irq_data_ready(indio_dev), + irq = sdata->get_irq_data_ready(indio_dev); + irq_trig = irqd_get_trigger_type(irq_get_irq_data(irq)); + /* + * If the IRQ is triggered on falling edge, we need to mark the + * interrupt as active low, if the hardware supports this. + */ + if (irq_trig == IRQF_TRIGGER_FALLING) { + if (!sdata->sensor_settings->drdy_irq.addr_ihl) { + dev_err(&indio_dev->dev, + "falling edge specified for IRQ but hardware " + "only support rising edge, will request " + "rising edge\n"); + irq_trig = IRQF_TRIGGER_RISING; + } else { + /* Set up INT active low i.e. falling edge */ + err = st_sensors_write_data_with_mask(indio_dev, + sdata->sensor_settings->drdy_irq.addr_ihl, + sdata->sensor_settings->drdy_irq.mask_ihl, 1); + if (err < 0) + goto iio_trigger_free; + dev_info(&indio_dev->dev, + "interrupts on the falling edge\n"); + } + } else if (irq_trig == IRQF_TRIGGER_RISING) { + dev_info(&indio_dev->dev, + "interrupts on the rising edge\n"); + + } else { + dev_err(&indio_dev->dev, + "unsupported IRQ trigger specified (%lx), only " + "rising and falling edges supported, enforce " + "rising edge\n", irq_trig); + irq_trig = IRQF_TRIGGER_RISING; + } + err = request_threaded_irq(irq, iio_trigger_generic_data_rdy_poll, NULL, - IRQF_TRIGGER_RISING, + irq_trig, sdata->trig->name, sdata->trig); if (err) { dev_err(&indio_dev->dev, "failed to request trigger IRQ.\n"); - goto request_irq_error; + goto iio_trigger_free; } iio_trigger_set_drvdata(sdata->trig, indio_dev); @@ -57,9 +90,8 @@ int st_sensors_allocate_trigger(struct iio_dev *indio_dev, iio_trigger_register_error: free_irq(sdata->get_irq_data_ready(indio_dev), sdata->trig); -request_irq_error: +iio_trigger_free: iio_trigger_free(sdata->trig); -iio_trigger_alloc_error: return err; } EXPORT_SYMBOL(st_sensors_allocate_trigger); diff --git a/drivers/iio/dac/Kconfig b/drivers/iio/dac/Kconfig index e701e28..5dc7150 100644 --- a/drivers/iio/dac/Kconfig +++ b/drivers/iio/dac/Kconfig @@ -111,6 +111,16 @@ config AD5755 To compile this driver as a module, choose M here: the module will be called ad5755. +config AD5761 + tristate "Analog Devices AD5761/61R/21/21R DAC driver" + depends on SPI_MASTER + help + Say yes here to build support for Analog Devices AD5761, AD5761R, AD5721, + AD5721R Digital to Analog Converter. + + To compile this driver as a module, choose M here: the + module will be called ad5761. + config AD5764 tristate "Analog Devices AD5764/64R/44/44R DAC driver" depends on SPI_MASTER @@ -176,11 +186,11 @@ config MAX5821 10 bits DAC. config MCP4725 - tristate "MCP4725 DAC driver" + tristate "MCP4725/6 DAC driver" depends on I2C ---help--- Say Y here if you want to build a driver for the Microchip - MCP 4725 12-bit digital-to-analog converter (DAC) with I2C + MCP 4725/6 12-bit digital-to-analog converter (DAC) with I2C interface. To compile this driver as a module, choose M here: the module diff --git a/drivers/iio/dac/Makefile b/drivers/iio/dac/Makefile index 63ae056..cb525b5 100644 --- a/drivers/iio/dac/Makefile +++ b/drivers/iio/dac/Makefile @@ -12,6 +12,7 @@ obj-$(CONFIG_AD5504) += ad5504.o obj-$(CONFIG_AD5446) += ad5446.o obj-$(CONFIG_AD5449) += ad5449.o obj-$(CONFIG_AD5755) += ad5755.o +obj-$(CONFIG_AD5761) += ad5761.o obj-$(CONFIG_AD5764) += ad5764.o obj-$(CONFIG_AD5791) += ad5791.o obj-$(CONFIG_AD5686) += ad5686.o diff --git a/drivers/iio/dac/ad5761.c b/drivers/iio/dac/ad5761.c new file mode 100644 index 0000000..d6510d6 --- /dev/null +++ b/drivers/iio/dac/ad5761.c @@ -0,0 +1,430 @@ +/* + * AD5721, AD5721R, AD5761, AD5761R, Voltage Output Digital to Analog Converter + * + * Copyright 2016 Qtechnology A/S + * 2016 Ricardo Ribalda <ricardo.ribalda@gmail.com> + * + * Licensed under the GPL-2. + */ +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/spi/spi.h> +#include <linux/bitops.h> +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/regulator/consumer.h> +#include <linux/platform_data/ad5761.h> + +#define AD5761_ADDR(addr) ((addr & 0xf) << 16) +#define AD5761_ADDR_NOOP 0x0 +#define AD5761_ADDR_DAC_WRITE 0x3 +#define AD5761_ADDR_CTRL_WRITE_REG 0x4 +#define AD5761_ADDR_SW_DATA_RESET 0x7 +#define AD5761_ADDR_DAC_READ 0xb +#define AD5761_ADDR_CTRL_READ_REG 0xc +#define AD5761_ADDR_SW_FULL_RESET 0xf + +#define AD5761_CTRL_USE_INTVREF BIT(5) +#define AD5761_CTRL_ETS BIT(6) + +/** + * struct ad5761_chip_info - chip specific information + * @int_vref: Value of the internal reference voltage in mV - 0 if external + * reference voltage is used + * @channel: channel specification +*/ + +struct ad5761_chip_info { + unsigned long int_vref; + const struct iio_chan_spec channel; +}; + +struct ad5761_range_params { + int m; + int c; +}; + +enum ad5761_supported_device_ids { + ID_AD5721, + ID_AD5721R, + ID_AD5761, + ID_AD5761R, +}; + +/** + * struct ad5761_state - driver instance specific data + * @spi: spi_device + * @vref_reg: reference voltage regulator + * @use_intref: true when the internal voltage reference is used + * @vref: actual voltage reference in mVolts + * @range: output range mode used + * @data: cache aligned spi buffer + */ +struct ad5761_state { + struct spi_device *spi; + struct regulator *vref_reg; + + bool use_intref; + int vref; + enum ad5761_voltage_range range; + + /* + * DMA (thus cache coherency maintenance) requires the + * transfer buffers to live in their own cache lines. + */ + union { + __be32 d32; + u8 d8[4]; + } data[3] ____cacheline_aligned; +}; + +static const struct ad5761_range_params ad5761_range_params[] = { + [AD5761_VOLTAGE_RANGE_M10V_10V] = { + .m = 80, + .c = 40, + }, + [AD5761_VOLTAGE_RANGE_0V_10V] = { + .m = 40, + .c = 0, + }, + [AD5761_VOLTAGE_RANGE_M5V_5V] = { + .m = 40, + .c = 20, + }, + [AD5761_VOLTAGE_RANGE_0V_5V] = { + .m = 20, + .c = 0, + }, + [AD5761_VOLTAGE_RANGE_M2V5_7V5] = { + .m = 40, + .c = 10, + }, + [AD5761_VOLTAGE_RANGE_M3V_3V] = { + .m = 24, + .c = 12, + }, + [AD5761_VOLTAGE_RANGE_0V_16V] = { + .m = 64, + .c = 0, + }, + [AD5761_VOLTAGE_RANGE_0V_20V] = { + .m = 80, + .c = 0, + }, +}; + +static int _ad5761_spi_write(struct ad5761_state *st, u8 addr, u16 val) +{ + st->data[0].d32 = cpu_to_be32(AD5761_ADDR(addr) | val); + + return spi_write(st->spi, &st->data[0].d8[1], 3); +} + +static int ad5761_spi_write(struct iio_dev *indio_dev, u8 addr, u16 val) +{ + struct ad5761_state *st = iio_priv(indio_dev); + int ret; + + mutex_lock(&indio_dev->mlock); + ret = _ad5761_spi_write(st, addr, val); + mutex_unlock(&indio_dev->mlock); + + return ret; +} + +static int _ad5761_spi_read(struct ad5761_state *st, u8 addr, u16 *val) +{ + int ret; + struct spi_transfer xfers[] = { + { + .tx_buf = &st->data[0].d8[1], + .bits_per_word = 8, + .len = 3, + .cs_change = true, + }, { + .tx_buf = &st->data[1].d8[1], + .rx_buf = &st->data[2].d8[1], + .bits_per_word = 8, + .len = 3, + }, + }; + + st->data[0].d32 = cpu_to_be32(AD5761_ADDR(addr)); + st->data[1].d32 = cpu_to_be32(AD5761_ADDR(AD5761_ADDR_NOOP)); + + ret = spi_sync_transfer(st->spi, xfers, ARRAY_SIZE(xfers)); + + *val = be32_to_cpu(st->data[2].d32); + + return ret; +} + +static int ad5761_spi_read(struct iio_dev *indio_dev, u8 addr, u16 *val) +{ + struct ad5761_state *st = iio_priv(indio_dev); + int ret; + + mutex_lock(&indio_dev->mlock); + ret = _ad5761_spi_read(st, addr, val); + mutex_unlock(&indio_dev->mlock); + + return ret; +} + +static int ad5761_spi_set_range(struct ad5761_state *st, + enum ad5761_voltage_range range) +{ + u16 aux; + int ret; + + aux = (range & 0x7) | AD5761_CTRL_ETS; + + if (st->use_intref) + aux |= AD5761_CTRL_USE_INTVREF; + + ret = _ad5761_spi_write(st, AD5761_ADDR_SW_FULL_RESET, 0); + if (ret) + return ret; + + ret = _ad5761_spi_write(st, AD5761_ADDR_CTRL_WRITE_REG, aux); + if (ret) + return ret; + + st->range = range; + + return 0; +} + +static int ad5761_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, + int *val2, + long mask) +{ + struct ad5761_state *st; + int ret; + u16 aux; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + ret = ad5761_spi_read(indio_dev, AD5761_ADDR_DAC_READ, &aux); + if (ret) + return ret; + *val = aux >> chan->scan_type.shift; + return IIO_VAL_INT; + case IIO_CHAN_INFO_SCALE: + st = iio_priv(indio_dev); + *val = st->vref * ad5761_range_params[st->range].m; + *val /= 10; + *val2 = chan->scan_type.realbits; + return IIO_VAL_FRACTIONAL_LOG2; + case IIO_CHAN_INFO_OFFSET: + st = iio_priv(indio_dev); + *val = -(1 << chan->scan_type.realbits); + *val *= ad5761_range_params[st->range].c; + *val /= ad5761_range_params[st->range].m; + return IIO_VAL_INT; + default: + return -EINVAL; + } +} + +static int ad5761_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, + int val2, + long mask) +{ + u16 aux; + + if (mask != IIO_CHAN_INFO_RAW) + return -EINVAL; + + if (val2 || (val << chan->scan_type.shift) > 0xffff || val < 0) + return -EINVAL; + + aux = val << chan->scan_type.shift; + + return ad5761_spi_write(indio_dev, AD5761_ADDR_DAC_WRITE, aux); +} + +static const struct iio_info ad5761_info = { + .read_raw = &ad5761_read_raw, + .write_raw = &ad5761_write_raw, + .driver_module = THIS_MODULE, +}; + +#define AD5761_CHAN(_bits) { \ + .type = IIO_VOLTAGE, \ + .output = 1, \ + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \ + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \ + BIT(IIO_CHAN_INFO_OFFSET), \ + .scan_type = { \ + .sign = 'u', \ + .realbits = (_bits), \ + .storagebits = 16, \ + .shift = 16 - (_bits), \ + }, \ +} + +static const struct ad5761_chip_info ad5761_chip_infos[] = { + [ID_AD5721] = { + .int_vref = 0, + .channel = AD5761_CHAN(12), + }, + [ID_AD5721R] = { + .int_vref = 2500, + .channel = AD5761_CHAN(12), + }, + [ID_AD5761] = { + .int_vref = 0, + .channel = AD5761_CHAN(16), + }, + [ID_AD5761R] = { + .int_vref = 2500, + .channel = AD5761_CHAN(16), + }, +}; + +static int ad5761_get_vref(struct ad5761_state *st, + const struct ad5761_chip_info *chip_info) +{ + int ret; + + st->vref_reg = devm_regulator_get_optional(&st->spi->dev, "vref"); + if (PTR_ERR(st->vref_reg) == -ENODEV) { + /* Use Internal regulator */ + if (!chip_info->int_vref) { + dev_err(&st->spi->dev, + "Voltage reference not found\n"); + return -EIO; + } + + st->use_intref = true; + st->vref = chip_info->int_vref; + return 0; + } + + if (IS_ERR(st->vref_reg)) { + dev_err(&st->spi->dev, + "Error getting voltage reference regulator\n"); + return PTR_ERR(st->vref_reg); + } + + ret = regulator_enable(st->vref_reg); + if (ret) { + dev_err(&st->spi->dev, + "Failed to enable voltage reference\n"); + return ret; + } + + ret = regulator_get_voltage(st->vref_reg); + if (ret < 0) { + dev_err(&st->spi->dev, + "Failed to get voltage reference value\n"); + goto disable_regulator_vref; + } + + if (ret < 2000000 || ret > 3000000) { + dev_warn(&st->spi->dev, + "Invalid external voltage ref. value %d uV\n", ret); + ret = -EIO; + goto disable_regulator_vref; + } + + st->vref = ret / 1000; + st->use_intref = false; + + return 0; + +disable_regulator_vref: + regulator_disable(st->vref_reg); + st->vref_reg = NULL; + return ret; +} + +static int ad5761_probe(struct spi_device *spi) +{ + struct iio_dev *iio_dev; + struct ad5761_state *st; + int ret; + const struct ad5761_chip_info *chip_info = + &ad5761_chip_infos[spi_get_device_id(spi)->driver_data]; + enum ad5761_voltage_range voltage_range = AD5761_VOLTAGE_RANGE_0V_5V; + struct ad5761_platform_data *pdata = dev_get_platdata(&spi->dev); + + iio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st)); + if (!iio_dev) + return -ENOMEM; + + st = iio_priv(iio_dev); + + st->spi = spi; + spi_set_drvdata(spi, iio_dev); + + ret = ad5761_get_vref(st, chip_info); + if (ret) + return ret; + + if (pdata) + voltage_range = pdata->voltage_range; + + ret = ad5761_spi_set_range(st, voltage_range); + if (ret) + goto disable_regulator_err; + + iio_dev->dev.parent = &spi->dev; + iio_dev->info = &ad5761_info; + iio_dev->modes = INDIO_DIRECT_MODE; + iio_dev->channels = &chip_info->channel; + iio_dev->num_channels = 1; + iio_dev->name = spi_get_device_id(st->spi)->name; + ret = iio_device_register(iio_dev); + if (ret) + goto disable_regulator_err; + + return 0; + +disable_regulator_err: + if (!IS_ERR_OR_NULL(st->vref_reg)) + regulator_disable(st->vref_reg); + + return ret; +} + +static int ad5761_remove(struct spi_device *spi) +{ + struct iio_dev *iio_dev = spi_get_drvdata(spi); + struct ad5761_state *st = iio_priv(iio_dev); + + iio_device_unregister(iio_dev); + + if (!IS_ERR_OR_NULL(st->vref_reg)) + regulator_disable(st->vref_reg); + + return 0; +} + +static const struct spi_device_id ad5761_id[] = { + {"ad5721", ID_AD5721}, + {"ad5721r", ID_AD5721R}, + {"ad5761", ID_AD5761}, + {"ad5761r", ID_AD5761R}, + {} +}; +MODULE_DEVICE_TABLE(spi, ad5761_id); + +static struct spi_driver ad5761_driver = { + .driver = { + .name = "ad5761", + }, + .probe = ad5761_probe, + .remove = ad5761_remove, + .id_table = ad5761_id, +}; +module_spi_driver(ad5761_driver); + +MODULE_AUTHOR("Ricardo Ribalda <ricardo.ribalda@gmail.com>"); +MODULE_DESCRIPTION("Analog Devices AD5721, AD5721R, AD5761, AD5761R driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/iio/dac/mcp4725.c b/drivers/iio/dac/mcp4725.c index b4dde83..cca935c 100644 --- a/drivers/iio/dac/mcp4725.c +++ b/drivers/iio/dac/mcp4725.c @@ -1,5 +1,5 @@ /* - * mcp4725.c - Support for Microchip MCP4725 + * mcp4725.c - Support for Microchip MCP4725/6 * * Copyright (C) 2012 Peter Meerwald <pmeerw@pmeerw.net> * @@ -134,6 +134,12 @@ static const char * const mcp4725_powerdown_modes[] = { "500kohm_to_gnd" }; +static const char * const mcp4726_powerdown_modes[] = { + "1kohm_to_gnd", + "125kohm_to_gnd", + "640kohm_to_gnd" +}; + static int mcp4725_get_powerdown_mode(struct iio_dev *indio_dev, const struct iio_chan_spec *chan) { @@ -182,11 +188,24 @@ static ssize_t mcp4725_write_powerdown(struct iio_dev *indio_dev, return len; } -static const struct iio_enum mcp4725_powerdown_mode_enum = { - .items = mcp4725_powerdown_modes, - .num_items = ARRAY_SIZE(mcp4725_powerdown_modes), - .get = mcp4725_get_powerdown_mode, - .set = mcp4725_set_powerdown_mode, +enum { + MCP4725, + MCP4726, +}; + +static const struct iio_enum mcp472x_powerdown_mode_enum[] = { + [MCP4725] = { + .items = mcp4725_powerdown_modes, + .num_items = ARRAY_SIZE(mcp4725_powerdown_modes), + .get = mcp4725_get_powerdown_mode, + .set = mcp4725_set_powerdown_mode, + }, + [MCP4726] = { + .items = mcp4726_powerdown_modes, + .num_items = ARRAY_SIZE(mcp4726_powerdown_modes), + .get = mcp4725_get_powerdown_mode, + .set = mcp4725_set_powerdown_mode, + }, }; static const struct iio_chan_spec_ext_info mcp4725_ext_info[] = { @@ -196,19 +215,46 @@ static const struct iio_chan_spec_ext_info mcp4725_ext_info[] = { .write = mcp4725_write_powerdown, .shared = IIO_SEPARATE, }, - IIO_ENUM("powerdown_mode", IIO_SEPARATE, &mcp4725_powerdown_mode_enum), - IIO_ENUM_AVAILABLE("powerdown_mode", &mcp4725_powerdown_mode_enum), + IIO_ENUM("powerdown_mode", IIO_SEPARATE, + &mcp472x_powerdown_mode_enum[MCP4725]), + IIO_ENUM_AVAILABLE("powerdown_mode", + &mcp472x_powerdown_mode_enum[MCP4725]), + { }, +}; + +static const struct iio_chan_spec_ext_info mcp4726_ext_info[] = { + { + .name = "powerdown", + .read = mcp4725_read_powerdown, + .write = mcp4725_write_powerdown, + .shared = IIO_SEPARATE, + }, + IIO_ENUM("powerdown_mode", IIO_SEPARATE, + &mcp472x_powerdown_mode_enum[MCP4726]), + IIO_ENUM_AVAILABLE("powerdown_mode", + &mcp472x_powerdown_mode_enum[MCP4726]), { }, }; -static const struct iio_chan_spec mcp4725_channel = { - .type = IIO_VOLTAGE, - .indexed = 1, - .output = 1, - .channel = 0, - .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), - .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), - .ext_info = mcp4725_ext_info, +static const struct iio_chan_spec mcp472x_channel[] = { + [MCP4725] = { + .type = IIO_VOLTAGE, + .indexed = 1, + .output = 1, + .channel = 0, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), + .ext_info = mcp4725_ext_info, + }, + [MCP4726] = { + .type = IIO_VOLTAGE, + .indexed = 1, + .output = 1, + .channel = 0, + .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), + .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), + .ext_info = mcp4726_ext_info, + }, }; static int mcp4725_set_value(struct iio_dev *indio_dev, int val) @@ -302,7 +348,7 @@ static int mcp4725_probe(struct i2c_client *client, indio_dev->dev.parent = &client->dev; indio_dev->name = id->name; indio_dev->info = &mcp4725_info; - indio_dev->channels = &mcp4725_channel; + indio_dev->channels = &mcp472x_channel[id->driver_data]; indio_dev->num_channels = 1; indio_dev->modes = INDIO_DIRECT_MODE; @@ -316,7 +362,7 @@ static int mcp4725_probe(struct i2c_client *client, } pd = (inbuf[0] >> 1) & 0x3; data->powerdown = pd > 0 ? true : false; - data->powerdown_mode = pd ? pd-1 : 2; /* 500kohm_to_gnd */ + data->powerdown_mode = pd ? pd - 1 : 2; /* largest register to gnd */ data->dac_value = (inbuf[1] << 4) | (inbuf[2] >> 4); return iio_device_register(indio_dev); @@ -329,7 +375,8 @@ static int mcp4725_remove(struct i2c_client *client) } static const struct i2c_device_id mcp4725_id[] = { - { "mcp4725", 0 }, + { "mcp4725", MCP4725 }, + { "mcp4726", MCP4726 }, { } }; MODULE_DEVICE_TABLE(i2c, mcp4725_id); @@ -346,5 +393,5 @@ static struct i2c_driver mcp4725_driver = { module_i2c_driver(mcp4725_driver); MODULE_AUTHOR("Peter Meerwald <pmeerw@pmeerw.net>"); -MODULE_DESCRIPTION("MCP4725 12-bit DAC"); +MODULE_DESCRIPTION("MCP4725/6 12-bit DAC"); MODULE_LICENSE("GPL"); diff --git a/drivers/iio/gyro/st_gyro_core.c b/drivers/iio/gyro/st_gyro_core.c index 02eddce..110f95b 100644 --- a/drivers/iio/gyro/st_gyro_core.c +++ b/drivers/iio/gyro/st_gyro_core.c @@ -185,6 +185,11 @@ static const struct st_sensor_settings st_gyro_sensors_settings[] = { .drdy_irq = { .addr = ST_GYRO_1_DRDY_IRQ_ADDR, .mask_int2 = ST_GYRO_1_DRDY_IRQ_INT2_MASK, + /* + * The sensor has IHL (active low) and open + * drain settings, but only for INT1 and not + * for the DRDY line on INT2. + */ }, .multi_read_bit = ST_GYRO_1_MULTIREAD_BIT, .bootime = 2, @@ -248,6 +253,11 @@ static const struct st_sensor_settings st_gyro_sensors_settings[] = { .drdy_irq = { .addr = ST_GYRO_2_DRDY_IRQ_ADDR, .mask_int2 = ST_GYRO_2_DRDY_IRQ_INT2_MASK, + /* + * The sensor has IHL (active low) and open + * drain settings, but only for INT1 and not + * for the DRDY line on INT2. + */ }, .multi_read_bit = ST_GYRO_2_MULTIREAD_BIT, .bootime = 2, @@ -307,6 +317,11 @@ static const struct st_sensor_settings st_gyro_sensors_settings[] = { .drdy_irq = { .addr = ST_GYRO_3_DRDY_IRQ_ADDR, .mask_int2 = ST_GYRO_3_DRDY_IRQ_INT2_MASK, + /* + * The sensor has IHL (active low) and open + * drain settings, but only for INT1 and not + * for the DRDY line on INT2. + */ }, .multi_read_bit = ST_GYRO_3_MULTIREAD_BIT, .bootime = 2, diff --git a/drivers/iio/health/max30100.c b/drivers/iio/health/max30100.c index 9d1c81f..09db893 100644 --- a/drivers/iio/health/max30100.c +++ b/drivers/iio/health/max30100.c @@ -13,7 +13,7 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * TODO: allow LED current and pulse length controls via device tree properties + * TODO: enable pulse length controls via device tree properties */ #include <linux/module.h> @@ -24,6 +24,7 @@ #include <linux/irq.h> #include <linux/i2c.h> #include <linux/mutex.h> +#include <linux/of.h> #include <linux/regmap.h> #include <linux/iio/iio.h> #include <linux/iio/buffer.h> @@ -65,6 +66,7 @@ #define MAX30100_REG_SPO2_CONFIG_1600US 0x3 #define MAX30100_REG_LED_CONFIG 0x09 +#define MAX30100_REG_LED_CONFIG_LED_MASK 0x0f #define MAX30100_REG_LED_CONFIG_RED_LED_SHIFT 4 #define MAX30100_REG_LED_CONFIG_24MA 0x07 @@ -111,6 +113,12 @@ static const struct regmap_config max30100_regmap_config = { .volatile_reg = max30100_is_volatile_reg, }; +static const unsigned int max30100_led_current_mapping[] = { + 4400, 7600, 11000, 14200, 17400, + 20800, 24000, 27100, 30600, 33800, + 37000, 40200, 43600, 46800, 50000 +}; + static const unsigned long max30100_scan_masks[] = {0x3, 0}; static const struct iio_chan_spec max30100_channels[] = { @@ -243,15 +251,76 @@ static irqreturn_t max30100_interrupt_handler(int irq, void *private) return IRQ_HANDLED; } +static int max30100_get_current_idx(unsigned int val, int *reg) +{ + int idx; + + /* LED turned off */ + if (val == 0) { + *reg = 0; + return 0; + } + + for (idx = 0; idx < ARRAY_SIZE(max30100_led_current_mapping); idx++) { + if (max30100_led_current_mapping[idx] == val) { + *reg = idx + 1; + return 0; + } + } + + return -EINVAL; +} + +static int max30100_led_init(struct max30100_data *data) +{ + struct device *dev = &data->client->dev; + struct device_node *np = dev->of_node; + unsigned int val[2]; + int reg, ret; + + ret = of_property_read_u32_array(np, "maxim,led-current-microamp", + (unsigned int *) &val, 2); + if (ret) { + /* Default to 24 mA RED LED, 50 mA IR LED */ + reg = (MAX30100_REG_LED_CONFIG_24MA << + MAX30100_REG_LED_CONFIG_RED_LED_SHIFT) | + MAX30100_REG_LED_CONFIG_50MA; + dev_warn(dev, "no led-current-microamp set"); + + return regmap_write(data->regmap, MAX30100_REG_LED_CONFIG, reg); + } + + /* RED LED current */ + ret = max30100_get_current_idx(val[0], ®); + if (ret) { + dev_err(dev, "invalid RED current setting %d", val[0]); + return ret; + } + + ret = regmap_update_bits(data->regmap, MAX30100_REG_LED_CONFIG, + MAX30100_REG_LED_CONFIG_LED_MASK << + MAX30100_REG_LED_CONFIG_RED_LED_SHIFT, + reg << MAX30100_REG_LED_CONFIG_RED_LED_SHIFT); + if (ret) + return ret; + + /* IR LED current */ + ret = max30100_get_current_idx(val[1], ®); + if (ret) { + dev_err(dev, "invalid IR current setting %d", val[1]); + return ret; + } + + return regmap_update_bits(data->regmap, MAX30100_REG_LED_CONFIG, + MAX30100_REG_LED_CONFIG_LED_MASK, reg); +} + static int max30100_chip_init(struct max30100_data *data) { int ret; - /* RED IR LED = 24mA, IR LED = 50mA */ - ret = regmap_write(data->regmap, MAX30100_REG_LED_CONFIG, - (MAX30100_REG_LED_CONFIG_24MA << - MAX30100_REG_LED_CONFIG_RED_LED_SHIFT) | - MAX30100_REG_LED_CONFIG_50MA); + /* setup LED current settings */ + ret = max30100_led_init(data); if (ret) return ret; diff --git a/drivers/iio/humidity/Kconfig b/drivers/iio/humidity/Kconfig index 6a23698..866dda1 100644 --- a/drivers/iio/humidity/Kconfig +++ b/drivers/iio/humidity/Kconfig @@ -43,14 +43,16 @@ config SI7005 humidity and temperature sensor. To compile this driver as a module, choose M here: the module - will be called si7005. + will be called si7005. This driver also + supports Hoperf TH02 Humidity and Temperature Sensor. config SI7020 tristate "Si7013/20/21 Relative Humidity and Temperature Sensors" depends on I2C help Say yes here to build support for the Silicon Labs Si7013/20/21 - Relative Humidity and Temperature Sensors. + Relative Humidity and Temperature Sensors. This driver also + supports Hoperf TH06 Humidity and Temperature Sensor. To compile this driver as a module, choose M here: the module will be called si7020. diff --git a/drivers/iio/humidity/dht11.c b/drivers/iio/humidity/dht11.c index cfc5a05..20b500d 100644 --- a/drivers/iio/humidity/dht11.c +++ b/drivers/iio/humidity/dht11.c @@ -50,12 +50,32 @@ #define DHT11_EDGES_PER_READ (2 * DHT11_BITS_PER_READ + \ DHT11_EDGES_PREAMBLE + 1) -/* Data transmission timing (nano seconds) */ +/* + * Data transmission timing: + * Data bits are encoded as pulse length (high time) on the data line. + * 0-bit: 22-30uS -- typically 26uS (AM2302) + * 1-bit: 68-75uS -- typically 70uS (AM2302) + * The acutal timings also depend on the properties of the cable, with + * longer cables typically making pulses shorter. + * + * Our decoding depends on the time resolution of the system: + * timeres > 34uS ... don't know what a 1-tick pulse is + * 34uS > timeres > 30uS ... no problem (30kHz and 32kHz clocks) + * 30uS > timeres > 23uS ... don't know what a 2-tick pulse is + * timeres < 23uS ... no problem + * + * Luckily clocks in the 33-44kHz range are quite uncommon, so we can + * support most systems if the threshold for decoding a pulse as 1-bit + * is chosen carefully. If somebody really wants to support clocks around + * 40kHz, where this driver is most unreliable, there are two options. + * a) select an implementation using busy loop polling on those systems + * b) use the checksum to do some probabilistic decoding + */ #define DHT11_START_TRANSMISSION 18 /* ms */ -#define DHT11_SENSOR_RESPONSE 80000 -#define DHT11_START_BIT 50000 -#define DHT11_DATA_BIT_LOW 27000 -#define DHT11_DATA_BIT_HIGH 70000 +#define DHT11_MIN_TIMERES 34000 /* ns */ +#define DHT11_THRESHOLD 49000 /* ns */ +#define DHT11_AMBIG_LOW 23000 /* ns */ +#define DHT11_AMBIG_HIGH 30000 /* ns */ struct dht11 { struct device *dev; @@ -76,43 +96,39 @@ struct dht11 { struct {s64 ts; int value; } edges[DHT11_EDGES_PER_READ]; }; -static unsigned char dht11_decode_byte(int *timing, int threshold) +static unsigned char dht11_decode_byte(char *bits) { unsigned char ret = 0; int i; for (i = 0; i < 8; ++i) { ret <<= 1; - if (timing[i] >= threshold) + if (bits[i]) ++ret; } return ret; } -static int dht11_decode(struct dht11 *dht11, int offset, int timeres) +static int dht11_decode(struct dht11 *dht11, int offset) { - int i, t, timing[DHT11_BITS_PER_READ], threshold; + int i, t; + char bits[DHT11_BITS_PER_READ]; unsigned char temp_int, temp_dec, hum_int, hum_dec, checksum; - threshold = DHT11_DATA_BIT_HIGH / timeres; - if (DHT11_DATA_BIT_LOW / timeres + 1 >= threshold) - pr_err("dht11: WARNING: decoding ambiguous\n"); - - /* scale down with timeres and check validity */ for (i = 0; i < DHT11_BITS_PER_READ; ++i) { t = dht11->edges[offset + 2 * i + 2].ts - dht11->edges[offset + 2 * i + 1].ts; if (!dht11->edges[offset + 2 * i + 1].value) return -EIO; /* lost synchronisation */ - timing[i] = t / timeres; + bits[i] = t > DHT11_THRESHOLD; } - hum_int = dht11_decode_byte(timing, threshold); - hum_dec = dht11_decode_byte(&timing[8], threshold); - temp_int = dht11_decode_byte(&timing[16], threshold); - temp_dec = dht11_decode_byte(&timing[24], threshold); - checksum = dht11_decode_byte(&timing[32], threshold); + hum_int = dht11_decode_byte(bits); + hum_dec = dht11_decode_byte(&bits[8]); + temp_int = dht11_decode_byte(&bits[16]); + temp_dec = dht11_decode_byte(&bits[24]); + checksum = dht11_decode_byte(&bits[32]); if (((hum_int + hum_dec + temp_int + temp_dec) & 0xff) != checksum) return -EIO; @@ -161,12 +177,12 @@ static int dht11_read_raw(struct iio_dev *iio_dev, int *val, int *val2, long m) { struct dht11 *dht11 = iio_priv(iio_dev); - int ret, timeres; + int ret, timeres, offset; mutex_lock(&dht11->lock); if (dht11->timestamp + DHT11_DATA_VALID_TIME < ktime_get_boot_ns()) { timeres = ktime_get_resolution_ns(); - if (DHT11_DATA_BIT_HIGH < 2 * timeres) { + if (timeres > DHT11_MIN_TIMERES) { dev_err(dht11->dev, "timeresolution %dns too low\n", timeres); /* In theory a better clock could become available @@ -176,6 +192,10 @@ static int dht11_read_raw(struct iio_dev *iio_dev, ret = -EAGAIN; goto err; } + if (timeres > DHT11_AMBIG_LOW && timeres < DHT11_AMBIG_HIGH) + dev_warn(dht11->dev, + "timeresolution: %dns - decoding ambiguous\n", + timeres); reinit_completion(&dht11->completion); @@ -208,11 +228,14 @@ static int dht11_read_raw(struct iio_dev *iio_dev, if (ret < 0) goto err; - ret = dht11_decode(dht11, - dht11->num_edges == DHT11_EDGES_PER_READ ? - DHT11_EDGES_PREAMBLE : - DHT11_EDGES_PREAMBLE - 2, - timeres); + offset = DHT11_EDGES_PREAMBLE + + dht11->num_edges - DHT11_EDGES_PER_READ; + for (; offset >= 0; --offset) { + ret = dht11_decode(dht11, offset); + if (!ret) + break; + } + if (ret) goto err; } diff --git a/drivers/iio/humidity/si7005.c b/drivers/iio/humidity/si7005.c index 91972cc..98a022f 100644 --- a/drivers/iio/humidity/si7005.c +++ b/drivers/iio/humidity/si7005.c @@ -170,6 +170,7 @@ static int si7005_probe(struct i2c_client *client, static const struct i2c_device_id si7005_id[] = { { "si7005", 0 }, + { "th02", 0 }, { } }; MODULE_DEVICE_TABLE(i2c, si7005_id); diff --git a/drivers/iio/humidity/si7020.c b/drivers/iio/humidity/si7020.c index 71991b5..5ab4e06 100644 --- a/drivers/iio/humidity/si7020.c +++ b/drivers/iio/humidity/si7020.c @@ -149,6 +149,7 @@ static int si7020_probe(struct i2c_client *client, static const struct i2c_device_id si7020_id[] = { { "si7020", 0 }, + { "th06", 0 }, { } }; MODULE_DEVICE_TABLE(i2c, si7020_id); diff --git a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c index f0e0609..0852b7f 100644 --- a/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c +++ b/drivers/iio/imu/inv_mpu6050/inv_mpu_core.c @@ -727,8 +727,7 @@ static const struct iio_info mpu_info = { /** * inv_check_and_setup_chip() - check and setup chip. */ -static int inv_check_and_setup_chip(struct inv_mpu6050_state *st, - const struct i2c_device_id *id) +static int inv_check_and_setup_chip(struct inv_mpu6050_state *st) { int result; @@ -795,7 +794,7 @@ static int inv_mpu_probe(struct i2c_client *client, if (pdata) st->plat_data = *pdata; /* power is turned on inside check chip type*/ - result = inv_check_and_setup_chip(st, id); + result = inv_check_and_setup_chip(st); if (result) return result; diff --git a/drivers/iio/industrialio-core.c b/drivers/iio/industrialio-core.c index af7cc1e..70cb7eb 100644 --- a/drivers/iio/industrialio-core.c +++ b/drivers/iio/industrialio-core.c @@ -77,6 +77,7 @@ static const char * const iio_chan_type_name_spec[] = { [IIO_VELOCITY] = "velocity", [IIO_CONCENTRATION] = "concentration", [IIO_RESISTANCE] = "resistance", + [IIO_PH] = "ph", }; static const char * const iio_modifier_names[] = { diff --git a/drivers/iio/light/opt3001.c b/drivers/iio/light/opt3001.c index 01e111e..b776c8e 100644 --- a/drivers/iio/light/opt3001.c +++ b/drivers/iio/light/opt3001.c @@ -65,19 +65,25 @@ #define OPT3001_REG_EXPONENT(n) ((n) >> 12) #define OPT3001_REG_MANTISSA(n) ((n) & 0xfff) +#define OPT3001_INT_TIME_LONG 800000 +#define OPT3001_INT_TIME_SHORT 100000 + /* * Time to wait for conversion result to be ready. The device datasheet - * worst-case max value is 880ms. Add some slack to be on the safe side. + * sect. 6.5 states results are ready after total integration time plus 3ms. + * This results in worst-case max values of 113ms or 883ms, respectively. + * Add some slack to be on the safe side. */ -#define OPT3001_RESULT_READY_TIMEOUT msecs_to_jiffies(1000) +#define OPT3001_RESULT_READY_SHORT 150 +#define OPT3001_RESULT_READY_LONG 1000 struct opt3001 { struct i2c_client *client; struct device *dev; struct mutex lock; - u16 ok_to_ignore_lock:1; - u16 result_ready:1; + bool ok_to_ignore_lock; + bool result_ready; wait_queue_head_t result_ready_queue; u16 result; @@ -89,6 +95,8 @@ struct opt3001 { u8 high_thresh_exp; u8 low_thresh_exp; + + bool use_irq; }; struct opt3001_scale { @@ -227,26 +235,30 @@ static int opt3001_get_lux(struct opt3001 *opt, int *val, int *val2) u16 reg; u8 exponent; u16 value; + long timeout; - /* - * Enable the end-of-conversion interrupt mechanism. Note that doing - * so will overwrite the low-level limit value however we will restore - * this value later on. - */ - ret = i2c_smbus_write_word_swapped(opt->client, OPT3001_LOW_LIMIT, - OPT3001_LOW_LIMIT_EOC_ENABLE); - if (ret < 0) { - dev_err(opt->dev, "failed to write register %02x\n", - OPT3001_LOW_LIMIT); - return ret; + if (opt->use_irq) { + /* + * Enable the end-of-conversion interrupt mechanism. Note that + * doing so will overwrite the low-level limit value however we + * will restore this value later on. + */ + ret = i2c_smbus_write_word_swapped(opt->client, + OPT3001_LOW_LIMIT, + OPT3001_LOW_LIMIT_EOC_ENABLE); + if (ret < 0) { + dev_err(opt->dev, "failed to write register %02x\n", + OPT3001_LOW_LIMIT); + return ret; + } + + /* Allow IRQ to access the device despite lock being set */ + opt->ok_to_ignore_lock = true; } - /* Reset data-ready indicator flag (will be set in the IRQ routine) */ + /* Reset data-ready indicator flag */ opt->result_ready = false; - /* Allow IRQ to access the device despite lock being set */ - opt->ok_to_ignore_lock = true; - /* Configure for single-conversion mode and start a new conversion */ ret = i2c_smbus_read_word_swapped(opt->client, OPT3001_CONFIGURATION); if (ret < 0) { @@ -266,32 +278,69 @@ static int opt3001_get_lux(struct opt3001 *opt, int *val, int *val2) goto err; } - /* Wait for the IRQ to indicate the conversion is complete */ - ret = wait_event_timeout(opt->result_ready_queue, opt->result_ready, - OPT3001_RESULT_READY_TIMEOUT); + if (opt->use_irq) { + /* Wait for the IRQ to indicate the conversion is complete */ + ret = wait_event_timeout(opt->result_ready_queue, + opt->result_ready, + msecs_to_jiffies(OPT3001_RESULT_READY_LONG)); + } else { + /* Sleep for result ready time */ + timeout = (opt->int_time == OPT3001_INT_TIME_SHORT) ? + OPT3001_RESULT_READY_SHORT : OPT3001_RESULT_READY_LONG; + msleep(timeout); + + /* Check result ready flag */ + ret = i2c_smbus_read_word_swapped(opt->client, + OPT3001_CONFIGURATION); + if (ret < 0) { + dev_err(opt->dev, "failed to read register %02x\n", + OPT3001_CONFIGURATION); + goto err; + } + + if (!(ret & OPT3001_CONFIGURATION_CRF)) { + ret = -ETIMEDOUT; + goto err; + } + + /* Obtain value */ + ret = i2c_smbus_read_word_swapped(opt->client, OPT3001_RESULT); + if (ret < 0) { + dev_err(opt->dev, "failed to read register %02x\n", + OPT3001_RESULT); + goto err; + } + opt->result = ret; + opt->result_ready = true; + } err: - /* Disallow IRQ to access the device while lock is active */ - opt->ok_to_ignore_lock = false; + if (opt->use_irq) + /* Disallow IRQ to access the device while lock is active */ + opt->ok_to_ignore_lock = false; if (ret == 0) return -ETIMEDOUT; else if (ret < 0) return ret; - /* - * Disable the end-of-conversion interrupt mechanism by restoring the - * low-level limit value (clearing OPT3001_LOW_LIMIT_EOC_ENABLE). Note - * that selectively clearing those enable bits would affect the actual - * limit value due to bit-overlap and therefore can't be done. - */ - value = (opt->low_thresh_exp << 12) | opt->low_thresh_mantissa; - ret = i2c_smbus_write_word_swapped(opt->client, OPT3001_LOW_LIMIT, - value); - if (ret < 0) { - dev_err(opt->dev, "failed to write register %02x\n", - OPT3001_LOW_LIMIT); - return ret; + if (opt->use_irq) { + /* + * Disable the end-of-conversion interrupt mechanism by + * restoring the low-level limit value (clearing + * OPT3001_LOW_LIMIT_EOC_ENABLE). Note that selectively clearing + * those enable bits would affect the actual limit value due to + * bit-overlap and therefore can't be done. + */ + value = (opt->low_thresh_exp << 12) | opt->low_thresh_mantissa; + ret = i2c_smbus_write_word_swapped(opt->client, + OPT3001_LOW_LIMIT, + value); + if (ret < 0) { + dev_err(opt->dev, "failed to write register %02x\n", + OPT3001_LOW_LIMIT); + return ret; + } } exponent = OPT3001_REG_EXPONENT(opt->result); @@ -325,13 +374,13 @@ static int opt3001_set_int_time(struct opt3001 *opt, int time) reg = ret; switch (time) { - case 100000: + case OPT3001_INT_TIME_SHORT: reg &= ~OPT3001_CONFIGURATION_CT; - opt->int_time = 100000; + opt->int_time = OPT3001_INT_TIME_SHORT; break; - case 800000: + case OPT3001_INT_TIME_LONG: reg |= OPT3001_CONFIGURATION_CT; - opt->int_time = 800000; + opt->int_time = OPT3001_INT_TIME_LONG; break; default: return -EINVAL; @@ -597,9 +646,9 @@ static int opt3001_configure(struct opt3001 *opt) /* Reflect status of the device's integration time setting */ if (reg & OPT3001_CONFIGURATION_CT) - opt->int_time = 800000; + opt->int_time = OPT3001_INT_TIME_LONG; else - opt->int_time = 100000; + opt->int_time = OPT3001_INT_TIME_SHORT; /* Ensure device is in shutdown initially */ opt3001_set_mode(opt, ®, OPT3001_CONFIGURATION_M_SHUTDOWN); @@ -733,12 +782,18 @@ static int opt3001_probe(struct i2c_client *client, return ret; } - ret = request_threaded_irq(irq, NULL, opt3001_irq, - IRQF_TRIGGER_FALLING | IRQF_ONESHOT, - "opt3001", iio); - if (ret) { - dev_err(dev, "failed to request IRQ #%d\n", irq); - return ret; + /* Make use of INT pin only if valid IRQ no. is given */ + if (irq > 0) { + ret = request_threaded_irq(irq, NULL, opt3001_irq, + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, + "opt3001", iio); + if (ret) { + dev_err(dev, "failed to request IRQ #%d\n", irq); + return ret; + } + opt->use_irq = true; + } else { + dev_dbg(opt->dev, "enabling interrupt-less operation\n"); } return 0; @@ -751,7 +806,8 @@ static int opt3001_remove(struct i2c_client *client) int ret; u16 reg; - free_irq(client->irq, iio); + if (opt->use_irq) + free_irq(client->irq, iio); ret = i2c_smbus_read_word_swapped(opt->client, OPT3001_CONFIGURATION); if (ret < 0) { diff --git a/drivers/iio/magnetometer/ak8975.c b/drivers/iio/magnetometer/ak8975.c index b13936d..9c5c9ef 100644 --- a/drivers/iio/magnetometer/ak8975.c +++ b/drivers/iio/magnetometer/ak8975.c @@ -252,7 +252,7 @@ struct ak_def { u8 data_regs[3]; }; -static struct ak_def ak_def_array[AK_MAX_TYPE] = { +static const struct ak_def ak_def_array[AK_MAX_TYPE] = { { .type = AK8975, .raw_to_gauss = ak8975_raw_to_gauss, @@ -360,7 +360,7 @@ static struct ak_def ak_def_array[AK_MAX_TYPE] = { */ struct ak8975_data { struct i2c_client *client; - struct ak_def *def; + const struct ak_def *def; struct attribute_group attrs; struct mutex lock; u8 asa[3]; diff --git a/drivers/iio/magnetometer/st_magn_core.c b/drivers/iio/magnetometer/st_magn_core.c index b27f014..501f858 100644 --- a/drivers/iio/magnetometer/st_magn_core.c +++ b/drivers/iio/magnetometer/st_magn_core.c @@ -175,6 +175,8 @@ #define ST_MAGN_3_BDU_MASK 0x10 #define ST_MAGN_3_DRDY_IRQ_ADDR 0x62 #define ST_MAGN_3_DRDY_INT_MASK 0x01 +#define ST_MAGN_3_IHL_IRQ_ADDR 0x63 +#define ST_MAGN_3_IHL_IRQ_MASK 0x04 #define ST_MAGN_3_FS_AVL_15000_GAIN 1500 #define ST_MAGN_3_MULTIREAD_BIT false #define ST_MAGN_3_OUT_X_L_ADDR 0x68 @@ -480,6 +482,8 @@ static const struct st_sensor_settings st_magn_sensors_settings[] = { .drdy_irq = { .addr = ST_MAGN_3_DRDY_IRQ_ADDR, .mask_int1 = ST_MAGN_3_DRDY_INT_MASK, + .addr_ihl = ST_MAGN_3_IHL_IRQ_ADDR, + .mask_ihl = ST_MAGN_3_IHL_IRQ_MASK, }, .multi_read_bit = ST_MAGN_3_MULTIREAD_BIT, .bootime = 2, diff --git a/drivers/iio/pressure/Kconfig b/drivers/iio/pressure/Kconfig index 6f2e7c9..cf03a43 100644 --- a/drivers/iio/pressure/Kconfig +++ b/drivers/iio/pressure/Kconfig @@ -10,11 +10,11 @@ config BMP280 depends on I2C select REGMAP_I2C help - Say yes here to build support for Bosch Sensortec BMP280 - pressure and temperature sensor. + Say yes here to build support for Bosch Sensortec BMP280 + pressure and temperature sensor. - To compile this driver as a module, choose M here: the module - will be called bmp280. + To compile this driver as a module, choose M here: the module + will be called bmp280. config HID_SENSOR_PRESS depends on HID_SENSOR_HUB @@ -27,18 +27,33 @@ config HID_SENSOR_PRESS Say yes here to build support for the HID SENSOR Pressure driver - To compile this driver as a module, choose M here: the module - will be called hid-sensor-press. + To compile this driver as a module, choose M here: the module + will be called hid-sensor-press. config MPL115 + tristate + +config MPL115_I2C tristate "Freescale MPL115A2 pressure sensor driver" depends on I2C + select MPL115 help Say yes here to build support for the Freescale MPL115A2 pressure sensor connected via I2C. - To compile this driver as a module, choose M here: the module - will be called mpl115. + To compile this driver as a module, choose M here: the module + will be called mpl115_i2c. + +config MPL115_SPI + tristate "Freescale MPL115A1 pressure sensor driver" + depends on SPI_MASTER + select MPL115 + help + Say yes here to build support for the Freescale MPL115A1 + pressure sensor connected via SPI. + + To compile this driver as a module, choose M here: the module + will be called mpl115_spi. config MPL3115 tristate "Freescale MPL3115A2 pressure sensor driver" @@ -49,8 +64,8 @@ config MPL3115 Say yes here to build support for the Freescale MPL3115A2 pressure sensor / altimeter. - To compile this driver as a module, choose M here: the module - will be called mpl3115. + To compile this driver as a module, choose M here: the module + will be called mpl3115. config MS5611 tristate "Measurement Specialties MS5611 pressure sensor driver" @@ -82,7 +97,7 @@ config MS5611_SPI config MS5637 tristate "Measurement Specialties MS5637 pressure & temperature sensor" depends on I2C - select IIO_MS_SENSORS_I2C + select IIO_MS_SENSORS_I2C help If you say yes here you get support for the Measurement Specialties MS5637 pressure and temperature sensor. @@ -128,7 +143,7 @@ config T5403 Say yes here to build support for the EPCOS T5403 pressure sensor connected via I2C. - To compile this driver as a module, choose M here: the module - will be called t5403. + To compile this driver as a module, choose M here: the module + will be called t5403. endmenu diff --git a/drivers/iio/pressure/Makefile b/drivers/iio/pressure/Makefile index 46571c96..d336af1 100644 --- a/drivers/iio/pressure/Makefile +++ b/drivers/iio/pressure/Makefile @@ -6,6 +6,8 @@ obj-$(CONFIG_BMP280) += bmp280.o obj-$(CONFIG_HID_SENSOR_PRESS) += hid-sensor-press.o obj-$(CONFIG_MPL115) += mpl115.o +obj-$(CONFIG_MPL115_I2C) += mpl115_i2c.o +obj-$(CONFIG_MPL115_SPI) += mpl115_spi.o obj-$(CONFIG_MPL3115) += mpl3115.o obj-$(CONFIG_MS5611) += ms5611_core.o obj-$(CONFIG_MS5611_I2C) += ms5611_i2c.o diff --git a/drivers/iio/pressure/mpl115.c b/drivers/iio/pressure/mpl115.c index a0d7dee..73f2f0c 100644 --- a/drivers/iio/pressure/mpl115.c +++ b/drivers/iio/pressure/mpl115.c @@ -1,5 +1,5 @@ /* - * mpl115.c - Support for Freescale MPL115A2 pressure/temperature sensor + * mpl115.c - Support for Freescale MPL115A pressure/temperature sensor * * Copyright (c) 2014 Peter Meerwald <pmeerw@pmeerw.net> * @@ -7,17 +7,16 @@ * the GNU General Public License. See the file COPYING in the main * directory of this archive for more details. * - * (7-bit I2C slave address 0x60) - * * TODO: shutdown pin * */ #include <linux/module.h> -#include <linux/i2c.h> #include <linux/iio/iio.h> #include <linux/delay.h> +#include "mpl115.h" + #define MPL115_PADC 0x00 /* pressure ADC output value, MSB first, 10 bit */ #define MPL115_TADC 0x02 /* temperature ADC output value, MSB first, 10 bit */ #define MPL115_A0 0x04 /* 12 bit integer, 3 bit fraction */ @@ -27,16 +26,18 @@ #define MPL115_CONVERT 0x12 /* convert temperature and pressure */ struct mpl115_data { - struct i2c_client *client; + struct device *dev; struct mutex lock; s16 a0; s16 b1, b2; s16 c12; + const struct mpl115_ops *ops; }; static int mpl115_request(struct mpl115_data *data) { - int ret = i2c_smbus_write_byte_data(data->client, MPL115_CONVERT, 0); + int ret = data->ops->write(data->dev, MPL115_CONVERT, 0); + if (ret < 0) return ret; @@ -57,12 +58,12 @@ static int mpl115_comp_pressure(struct mpl115_data *data, int *val, int *val2) if (ret < 0) goto done; - ret = i2c_smbus_read_word_swapped(data->client, MPL115_PADC); + ret = data->ops->read(data->dev, MPL115_PADC); if (ret < 0) goto done; padc = ret >> 6; - ret = i2c_smbus_read_word_swapped(data->client, MPL115_TADC); + ret = data->ops->read(data->dev, MPL115_TADC); if (ret < 0) goto done; tadc = ret >> 6; @@ -90,7 +91,7 @@ static int mpl115_read_temp(struct mpl115_data *data) ret = mpl115_request(data); if (ret < 0) goto done; - ret = i2c_smbus_read_word_swapped(data->client, MPL115_TADC); + ret = data->ops->read(data->dev, MPL115_TADC); done: mutex_unlock(&data->lock); return ret; @@ -145,66 +146,53 @@ static const struct iio_info mpl115_info = { .driver_module = THIS_MODULE, }; -static int mpl115_probe(struct i2c_client *client, - const struct i2c_device_id *id) +int mpl115_probe(struct device *dev, const char *name, + const struct mpl115_ops *ops) { struct mpl115_data *data; struct iio_dev *indio_dev; int ret; - if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA)) - return -ENODEV; - - indio_dev = devm_iio_device_alloc(&client->dev, sizeof(*data)); + indio_dev = devm_iio_device_alloc(dev, sizeof(*data)); if (!indio_dev) return -ENOMEM; data = iio_priv(indio_dev); - data->client = client; + data->dev = dev; + data->ops = ops; mutex_init(&data->lock); - i2c_set_clientdata(client, indio_dev); indio_dev->info = &mpl115_info; - indio_dev->name = id->name; - indio_dev->dev.parent = &client->dev; + indio_dev->name = name; + indio_dev->dev.parent = dev; indio_dev->modes = INDIO_DIRECT_MODE; indio_dev->channels = mpl115_channels; indio_dev->num_channels = ARRAY_SIZE(mpl115_channels); - ret = i2c_smbus_read_word_swapped(data->client, MPL115_A0); + ret = data->ops->init(data->dev); + if (ret) + return ret; + + ret = data->ops->read(data->dev, MPL115_A0); if (ret < 0) return ret; data->a0 = ret; - ret = i2c_smbus_read_word_swapped(data->client, MPL115_B1); + ret = data->ops->read(data->dev, MPL115_B1); if (ret < 0) return ret; data->b1 = ret; - ret = i2c_smbus_read_word_swapped(data->client, MPL115_B2); + ret = data->ops->read(data->dev, MPL115_B2); if (ret < 0) return ret; data->b2 = ret; - ret = i2c_smbus_read_word_swapped(data->client, MPL115_C12); + ret = data->ops->read(data->dev, MPL115_C12); if (ret < 0) return ret; data->c12 = ret; - return devm_iio_device_register(&client->dev, indio_dev); + return devm_iio_device_register(dev, indio_dev); } - -static const struct i2c_device_id mpl115_id[] = { - { "mpl115", 0 }, - { } -}; -MODULE_DEVICE_TABLE(i2c, mpl115_id); - -static struct i2c_driver mpl115_driver = { - .driver = { - .name = "mpl115", - }, - .probe = mpl115_probe, - .id_table = mpl115_id, -}; -module_i2c_driver(mpl115_driver); +EXPORT_SYMBOL_GPL(mpl115_probe); MODULE_AUTHOR("Peter Meerwald <pmeerw@pmeerw.net>"); MODULE_DESCRIPTION("Freescale MPL115 pressure/temperature driver"); diff --git a/drivers/iio/pressure/mpl115.h b/drivers/iio/pressure/mpl115.h new file mode 100644 index 0000000..01b6527 --- /dev/null +++ b/drivers/iio/pressure/mpl115.h @@ -0,0 +1,24 @@ +/* + * Freescale MPL115A pressure/temperature sensor + * + * Copyright (c) 2014 Peter Meerwald <pmeerw@pmeerw.net> + * Copyright (c) 2016 Akinobu Mita <akinobu.mita@gmail.com> + * + * This file is subject to the terms and conditions of version 2 of + * the GNU General Public License. See the file COPYING in the main + * directory of this archive for more details. + */ + +#ifndef _MPL115_H_ +#define _MPL115_H_ + +struct mpl115_ops { + int (*init)(struct device *); + int (*read)(struct device *, u8); + int (*write)(struct device *, u8, u8); +}; + +int mpl115_probe(struct device *dev, const char *name, + const struct mpl115_ops *ops); + +#endif diff --git a/drivers/iio/pressure/mpl115_i2c.c b/drivers/iio/pressure/mpl115_i2c.c new file mode 100644 index 0000000..9ea055c --- /dev/null +++ b/drivers/iio/pressure/mpl115_i2c.c @@ -0,0 +1,67 @@ +/* + * Freescale MPL115A2 pressure/temperature sensor + * + * Copyright (c) 2014 Peter Meerwald <pmeerw@pmeerw.net> + * + * This file is subject to the terms and conditions of version 2 of + * the GNU General Public License. See the file COPYING in the main + * directory of this archive for more details. + * + * (7-bit I2C slave address 0x60) + * + * Datasheet: http://www.nxp.com/files/sensors/doc/data_sheet/MPL115A2.pdf + */ + +#include <linux/module.h> +#include <linux/i2c.h> + +#include "mpl115.h" + +static int mpl115_i2c_init(struct device *dev) +{ + return 0; +} + +static int mpl115_i2c_read(struct device *dev, u8 address) +{ + return i2c_smbus_read_word_swapped(to_i2c_client(dev), address); +} + +static int mpl115_i2c_write(struct device *dev, u8 address, u8 value) +{ + return i2c_smbus_write_byte_data(to_i2c_client(dev), address, value); +} + +static const struct mpl115_ops mpl115_i2c_ops = { + .init = mpl115_i2c_init, + .read = mpl115_i2c_read, + .write = mpl115_i2c_write, +}; + +static int mpl115_i2c_probe(struct i2c_client *client, + const struct i2c_device_id *id) +{ + if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_WORD_DATA)) + return -ENODEV; + + return mpl115_probe(&client->dev, id->name, &mpl115_i2c_ops); +} + +static const struct i2c_device_id mpl115_i2c_id[] = { + { "mpl115", 0 }, + { } +}; +MODULE_DEVICE_TABLE(i2c, mpl115_i2c_id); + +static struct i2c_driver mpl115_i2c_driver = { + .driver = { + .name = "mpl115", + }, + .probe = mpl115_i2c_probe, + .id_table = mpl115_i2c_id, +}; +module_i2c_driver(mpl115_i2c_driver); + +MODULE_AUTHOR("Peter Meerwald <pmeerw@pmeerw.net>"); +MODULE_DESCRIPTION("Freescale MPL115A2 pressure/temperature driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/iio/pressure/mpl115_spi.c b/drivers/iio/pressure/mpl115_spi.c new file mode 100644 index 0000000..9ebf55f --- /dev/null +++ b/drivers/iio/pressure/mpl115_spi.c @@ -0,0 +1,106 @@ +/* + * Freescale MPL115A1 pressure/temperature sensor + * + * Copyright (c) 2016 Akinobu Mita <akinobu.mita@gmail.com> + * + * This file is subject to the terms and conditions of version 2 of + * the GNU General Public License. See the file COPYING in the main + * directory of this archive for more details. + * + * Datasheet: http://www.nxp.com/files/sensors/doc/data_sheet/MPL115A1.pdf + */ + +#include <linux/module.h> +#include <linux/spi/spi.h> + +#include "mpl115.h" + +#define MPL115_SPI_WRITE(address) ((address) << 1) +#define MPL115_SPI_READ(address) (0x80 | (address) << 1) + +struct mpl115_spi_buf { + u8 tx[4]; + u8 rx[4]; +}; + +static int mpl115_spi_init(struct device *dev) +{ + struct spi_device *spi = to_spi_device(dev); + struct mpl115_spi_buf *buf; + + buf = devm_kzalloc(dev, sizeof(*buf), GFP_KERNEL); + if (!buf) + return -ENOMEM; + + spi_set_drvdata(spi, buf); + + return 0; +} + +static int mpl115_spi_read(struct device *dev, u8 address) +{ + struct spi_device *spi = to_spi_device(dev); + struct mpl115_spi_buf *buf = spi_get_drvdata(spi); + struct spi_transfer xfer = { + .tx_buf = buf->tx, + .rx_buf = buf->rx, + .len = 4, + }; + int ret; + + buf->tx[0] = MPL115_SPI_READ(address); + buf->tx[2] = MPL115_SPI_READ(address + 1); + + ret = spi_sync_transfer(spi, &xfer, 1); + if (ret) + return ret; + + return (buf->rx[1] << 8) | buf->rx[3]; +} + +static int mpl115_spi_write(struct device *dev, u8 address, u8 value) +{ + struct spi_device *spi = to_spi_device(dev); + struct mpl115_spi_buf *buf = spi_get_drvdata(spi); + struct spi_transfer xfer = { + .tx_buf = buf->tx, + .len = 2, + }; + + buf->tx[0] = MPL115_SPI_WRITE(address); + buf->tx[1] = value; + + return spi_sync_transfer(spi, &xfer, 1); +} + +static const struct mpl115_ops mpl115_spi_ops = { + .init = mpl115_spi_init, + .read = mpl115_spi_read, + .write = mpl115_spi_write, +}; + +static int mpl115_spi_probe(struct spi_device *spi) +{ + const struct spi_device_id *id = spi_get_device_id(spi); + + return mpl115_probe(&spi->dev, id->name, &mpl115_spi_ops); +} + +static const struct spi_device_id mpl115_spi_ids[] = { + { "mpl115", 0 }, + {} +}; +MODULE_DEVICE_TABLE(spi, mpl115_spi_ids); + +static struct spi_driver mpl115_spi_driver = { + .driver = { + .name = "mpl115", + }, + .probe = mpl115_spi_probe, + .id_table = mpl115_spi_ids, +}; +module_spi_driver(mpl115_spi_driver); + +MODULE_AUTHOR("Akinobu Mita <akinobu.mita@gmail.com>"); +MODULE_DESCRIPTION("Freescale MPL115A1 pressure/temperature driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/iio/pressure/st_pressure_core.c b/drivers/iio/pressure/st_pressure_core.c index b39a2fb..172393a 100644 --- a/drivers/iio/pressure/st_pressure_core.c +++ b/drivers/iio/pressure/st_pressure_core.c @@ -62,6 +62,8 @@ #define ST_PRESS_LPS331AP_DRDY_IRQ_ADDR 0x22 #define ST_PRESS_LPS331AP_DRDY_IRQ_INT1_MASK 0x04 #define ST_PRESS_LPS331AP_DRDY_IRQ_INT2_MASK 0x20 +#define ST_PRESS_LPS331AP_IHL_IRQ_ADDR 0x22 +#define ST_PRESS_LPS331AP_IHL_IRQ_MASK 0x80 #define ST_PRESS_LPS331AP_MULTIREAD_BIT true #define ST_PRESS_LPS331AP_TEMP_OFFSET 42500 @@ -100,6 +102,8 @@ #define ST_PRESS_LPS25H_DRDY_IRQ_ADDR 0x23 #define ST_PRESS_LPS25H_DRDY_IRQ_INT1_MASK 0x01 #define ST_PRESS_LPS25H_DRDY_IRQ_INT2_MASK 0x10 +#define ST_PRESS_LPS25H_IHL_IRQ_ADDR 0x22 +#define ST_PRESS_LPS25H_IHL_IRQ_MASK 0x80 #define ST_PRESS_LPS25H_MULTIREAD_BIT true #define ST_PRESS_LPS25H_TEMP_OFFSET 42500 #define ST_PRESS_LPS25H_OUT_XL_ADDR 0x28 @@ -220,6 +224,8 @@ static const struct st_sensor_settings st_press_sensors_settings[] = { .addr = ST_PRESS_LPS331AP_DRDY_IRQ_ADDR, .mask_int1 = ST_PRESS_LPS331AP_DRDY_IRQ_INT1_MASK, .mask_int2 = ST_PRESS_LPS331AP_DRDY_IRQ_INT2_MASK, + .addr_ihl = ST_PRESS_LPS331AP_IHL_IRQ_ADDR, + .mask_ihl = ST_PRESS_LPS331AP_IHL_IRQ_MASK, }, .multi_read_bit = ST_PRESS_LPS331AP_MULTIREAD_BIT, .bootime = 2, @@ -304,6 +310,8 @@ static const struct st_sensor_settings st_press_sensors_settings[] = { .addr = ST_PRESS_LPS25H_DRDY_IRQ_ADDR, .mask_int1 = ST_PRESS_LPS25H_DRDY_IRQ_INT1_MASK, .mask_int2 = ST_PRESS_LPS25H_DRDY_IRQ_INT2_MASK, + .addr_ihl = ST_PRESS_LPS25H_IHL_IRQ_ADDR, + .mask_ihl = ST_PRESS_LPS25H_IHL_IRQ_MASK, }, .multi_read_bit = ST_PRESS_LPS25H_MULTIREAD_BIT, .bootime = 2, diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 054fc10..f0ba782 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -525,6 +525,284 @@ config VEXPRESS_SYSCFG ARM Ltd. Versatile Express uses specialised platform configuration bus. System Configuration interface is one of the possible means of generating transactions on this bus. +config PANEL + tristate "Parallel port LCD/Keypad Panel support" + depends on PARPORT + ---help--- + Say Y here if you have an HD44780 or KS-0074 LCD connected to your + parallel port. This driver also features 4 and 6-key keypads. The LCD + is accessible through the /dev/lcd char device (10, 156), and the + keypad through /dev/keypad (10, 185). Both require misc device to be + enabled. This code can either be compiled as a module, or linked into + the kernel and started at boot. If you don't understand what all this + is about, say N. + +config PANEL_PARPORT + int "Default parallel port number (0=LPT1)" + depends on PANEL + range 0 255 + default "0" + ---help--- + This is the index of the parallel port the panel is connected to. One + driver instance only supports one parallel port, so if your keypad + and LCD are connected to two separate ports, you have to start two + modules with different arguments. Numbering starts with '0' for LPT1, + and so on. + +config PANEL_PROFILE + int "Default panel profile (0-5, 0=custom)" + depends on PANEL + range 0 5 + default "5" + ---help--- + To ease configuration, the driver supports different configuration + profiles for past and recent wirings. These profiles can also be + used to define an approximative configuration, completed by a few + other options. Here are the profiles : + + 0 = custom (see further) + 1 = 2x16 parallel LCD, old keypad + 2 = 2x16 serial LCD (KS-0074), new keypad + 3 = 2x16 parallel LCD (Hantronix), no keypad + 4 = 2x16 parallel LCD (Nexcom NSA1045) with Nexcom's keypad + 5 = 2x40 parallel LCD (old one), with old keypad + + Custom configurations allow you to define how your display is + wired to the parallel port, and how it works. This is only intended + for experts. + +config PANEL_KEYPAD + depends on PANEL && PANEL_PROFILE="0" + int "Keypad type (0=none, 1=old 6 keys, 2=new 6 keys, 3=Nexcom 4 keys)" + range 0 3 + default 0 + ---help--- + This enables and configures a keypad connected to the parallel port. + The keys will be read from character device 10,185. Valid values are : + + 0 : do not enable this driver + 1 : old 6 keys keypad + 2 : new 6 keys keypad, as used on the server at www.ant-computing.com + 3 : Nexcom NSA1045's 4 keys keypad + + New profiles can be described in the driver source. The driver also + supports simultaneous keys pressed when the keypad supports them. + +config PANEL_LCD + depends on PANEL && PANEL_PROFILE="0" + int "LCD type (0=none, 1=custom, 2=old //, 3=ks0074, 4=hantronix, 5=Nexcom)" + range 0 5 + default 0 + ---help--- + This enables and configures an LCD connected to the parallel port. + The driver includes an interpreter for escape codes starting with + '\e[L' which are specific to the LCD, and a few ANSI codes. The + driver will be registered as character device 10,156, usually + under the name '/dev/lcd'. There are a total of 6 supported types : + + 0 : do not enable the driver + 1 : custom configuration and wiring (see further) + 2 : 2x16 & 2x40 parallel LCD (old wiring) + 3 : 2x16 serial LCD (KS-0074 based) + 4 : 2x16 parallel LCD (Hantronix wiring) + 5 : 2x16 parallel LCD (Nexcom wiring) + + When type '1' is specified, other options will appear to configure + more precise aspects (wiring, dimensions, protocol, ...). Please note + that those values changed from the 2.4 driver for better consistency. + +config PANEL_LCD_HEIGHT + depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1" + int "Number of lines on the LCD (1-2)" + range 1 2 + default 2 + ---help--- + This is the number of visible character lines on the LCD in custom profile. + It can either be 1 or 2. + +config PANEL_LCD_WIDTH + depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1" + int "Number of characters per line on the LCD (1-40)" + range 1 40 + default 40 + ---help--- + This is the number of characters per line on the LCD in custom profile. + Common values are 16,20,24,40. + +config PANEL_LCD_BWIDTH + depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1" + int "Internal LCD line width (1-40, 40 by default)" + range 1 40 + default 40 + ---help--- + Most LCDs use a standard controller which supports hardware lines of 40 + characters, although sometimes only 16, 20 or 24 of them are really wired + to the terminal. This results in some non-visible but addressable characters, + and is the case for most parallel LCDs. Other LCDs, and some serial ones, + however, use the same line width internally as what is visible. The KS0074 + for example, uses 16 characters per line for 16 visible characters per line. + + This option lets you configure the value used by your LCD in 'custom' profile. + If you don't know, put '40' here. + +config PANEL_LCD_HWIDTH + depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1" + int "Hardware LCD line width (1-64, 64 by default)" + range 1 64 + default 64 + ---help--- + Most LCDs use a single address bit to differentiate line 0 and line 1. Since + some of them need to be able to address 40 chars with the lower bits, they + often use the immediately superior power of 2, which is 64, to address the + next line. + + If you don't know what your LCD uses, in doubt let 16 here for a 2x16, and + 64 here for a 2x40. + +config PANEL_LCD_CHARSET + depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1" + int "LCD character set (0=normal, 1=KS0074)" + range 0 1 + default 0 + ---help--- + Some controllers such as the KS0074 use a somewhat strange character set + where many symbols are at unusual places. The driver knows how to map + 'standard' ASCII characters to the character sets used by these controllers. + Valid values are : + + 0 : normal (untranslated) character set + 1 : KS0074 character set + + If you don't know, use the normal one (0). + +config PANEL_LCD_PROTO + depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1" + int "LCD communication mode (0=parallel 8 bits, 1=serial)" + range 0 1 + default 0 + ---help--- + This driver now supports any serial or parallel LCD wired to a parallel + port. But before assigning signals, the driver needs to know if it will + be driving a serial LCD or a parallel one. Serial LCDs only use 2 wires + (SDA/SCL), while parallel ones use 2 or 3 wires for the control signals + (E, RS, sometimes RW), and 4 or 8 for the data. Use 0 here for a 8 bits + parallel LCD, and 1 for a serial LCD. + +config PANEL_LCD_PIN_E + depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1" && PANEL_LCD_PROTO="0" + int "Parallel port pin number & polarity connected to the LCD E signal (-17...17) " + range -17 17 + default 14 + ---help--- + This describes the number of the parallel port pin to which the LCD 'E' + signal has been connected. It can be : + + 0 : no connection (eg: connected to ground) + 1..17 : directly connected to any of these pins on the DB25 plug + -1..-17 : connected to the same pin through an inverter (eg: transistor). + + Default for the 'E' pin in custom profile is '14' (AUTOFEED). + +config PANEL_LCD_PIN_RS + depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1" && PANEL_LCD_PROTO="0" + int "Parallel port pin number & polarity connected to the LCD RS signal (-17...17) " + range -17 17 + default 17 + ---help--- + This describes the number of the parallel port pin to which the LCD 'RS' + signal has been connected. It can be : + + 0 : no connection (eg: connected to ground) + 1..17 : directly connected to any of these pins on the DB25 plug + -1..-17 : connected to the same pin through an inverter (eg: transistor). + + Default for the 'RS' pin in custom profile is '17' (SELECT IN). + +config PANEL_LCD_PIN_RW + depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1" && PANEL_LCD_PROTO="0" + int "Parallel port pin number & polarity connected to the LCD RW signal (-17...17) " + range -17 17 + default 16 + ---help--- + This describes the number of the parallel port pin to which the LCD 'RW' + signal has been connected. It can be : + + 0 : no connection (eg: connected to ground) + 1..17 : directly connected to any of these pins on the DB25 plug + -1..-17 : connected to the same pin through an inverter (eg: transistor). + + Default for the 'RW' pin in custom profile is '16' (INIT). + +config PANEL_LCD_PIN_SCL + depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1" && PANEL_LCD_PROTO!="0" + int "Parallel port pin number & polarity connected to the LCD SCL signal (-17...17) " + range -17 17 + default 1 + ---help--- + This describes the number of the parallel port pin to which the serial + LCD 'SCL' signal has been connected. It can be : + + 0 : no connection (eg: connected to ground) + 1..17 : directly connected to any of these pins on the DB25 plug + -1..-17 : connected to the same pin through an inverter (eg: transistor). + + Default for the 'SCL' pin in custom profile is '1' (STROBE). + +config PANEL_LCD_PIN_SDA + depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1" && PANEL_LCD_PROTO!="0" + int "Parallel port pin number & polarity connected to the LCD SDA signal (-17...17) " + range -17 17 + default 2 + ---help--- + This describes the number of the parallel port pin to which the serial + LCD 'SDA' signal has been connected. It can be : + + 0 : no connection (eg: connected to ground) + 1..17 : directly connected to any of these pins on the DB25 plug + -1..-17 : connected to the same pin through an inverter (eg: transistor). + + Default for the 'SDA' pin in custom profile is '2' (D0). + +config PANEL_LCD_PIN_BL + depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1" + int "Parallel port pin number & polarity connected to the LCD backlight signal (-17...17) " + range -17 17 + default 0 + ---help--- + This describes the number of the parallel port pin to which the LCD 'BL' signal + has been connected. It can be : + + 0 : no connection (eg: connected to ground) + 1..17 : directly connected to any of these pins on the DB25 plug + -1..-17 : connected to the same pin through an inverter (eg: transistor). + + Default for the 'BL' pin in custom profile is '0' (uncontrolled). + +config PANEL_CHANGE_MESSAGE + depends on PANEL + bool "Change LCD initialization message ?" + default "n" + ---help--- + This allows you to replace the boot message indicating the kernel version + and the driver version with a custom message. This is useful on appliances + where a simple 'Starting system' message can be enough to stop a customer + from worrying. + + If you say 'Y' here, you'll be able to choose a message yourself. Otherwise, + say 'N' and keep the default message with the version. + +config PANEL_BOOT_MESSAGE + depends on PANEL && PANEL_CHANGE_MESSAGE="y" + string "New initialization message" + default "" + ---help--- + This allows you to replace the boot message indicating the kernel version + and the driver version with a custom message. This is useful on appliances + where a simple 'Starting system' message can be enough to stop a customer + from worrying. + + An empty message will only clear the display at driver init time. Any other + printf()-formatted message is valid with newline and escape codes. source "drivers/misc/c2port/Kconfig" source "drivers/misc/eeprom/Kconfig" diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index 537d7f3..b2fb6dbf 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -56,3 +56,4 @@ obj-$(CONFIG_GENWQE) += genwqe/ obj-$(CONFIG_ECHO) += echo/ obj-$(CONFIG_VEXPRESS_SYSCFG) += vexpress-syscfg.o obj-$(CONFIG_CXL_BASE) += cxl/ +obj-$(CONFIG_PANEL) += panel.o diff --git a/drivers/staging/panel/panel.c b/drivers/misc/panel.c index 70b8f4f..4262db0 100644 --- a/drivers/staging/panel/panel.c +++ b/drivers/misc/panel.c @@ -172,8 +172,6 @@ static __u8 scan_mask_o; /* logical or of the input bits involved in the scan matrix */ static __u8 scan_mask_i; -typedef __u64 pmask_t; - enum input_type { INPUT_TYPE_STD, INPUT_TYPE_KBD, @@ -188,8 +186,8 @@ enum input_state { struct logical_input { struct list_head list; - pmask_t mask; - pmask_t value; + __u64 mask; + __u64 value; enum input_type type; enum input_state state; __u8 rise_time, fall_time; @@ -219,19 +217,19 @@ static LIST_HEAD(logical_inputs); /* list of all defined logical inputs */ * corresponds to the ground. * Within each group, bits are stored in the same order as read on the port : * BAPSE (busy=4, ack=3, paper empty=2, select=1, error=0). - * So, each __u64 (or pmask_t) is represented like this : + * So, each __u64 is represented like this : * 0000000000000000000BAPSEBAPSEBAPSEBAPSEBAPSEBAPSEBAPSEBAPSEBAPSE * <-----unused------><gnd><d07><d06><d05><d04><d03><d02><d01><d00> */ /* what has just been read from the I/O ports */ -static pmask_t phys_read; +static __u64 phys_read; /* previous phys_read */ -static pmask_t phys_read_prev; +static __u64 phys_read_prev; /* stabilized phys_read (phys_read|phys_read_prev) */ -static pmask_t phys_curr; +static __u64 phys_curr; /* previous phys_curr */ -static pmask_t phys_prev; +static __u64 phys_prev; /* 0 means that at least one logical signal needs be computed */ static char inputs_stable; @@ -943,7 +941,8 @@ static void lcd_clear_fast_s(void) lcd_send_serial(0x5F); /* R/W=W, RS=1 */ lcd_send_serial(' ' & 0x0F); lcd_send_serial((' ' >> 4) & 0x0F); - udelay(40); /* the shortest data takes at least 40 us */ + /* the shortest data takes at least 40 us */ + udelay(40); } spin_unlock_irq(&pprt_lock); @@ -1784,7 +1783,7 @@ static void phys_scan_contacts(void) gndmask = PNL_PINPUT(r_str(pprt)) & scan_mask_i; /* grounded inputs are signals 40-44 */ - phys_read |= (pmask_t) gndmask << 40; + phys_read |= (__u64)gndmask << 40; if (bitmask != gndmask) { /* @@ -1800,7 +1799,7 @@ static void phys_scan_contacts(void) w_dtr(pprt, oldval & ~bitval); /* enable this output */ bitmask = PNL_PINPUT(r_str(pprt)) & ~gndmask; - phys_read |= (pmask_t) bitmask << (5 * bit); + phys_read |= (__u64)bitmask << (5 * bit); } w_dtr(pprt, oldval); /* disable all outputs */ } @@ -2037,32 +2036,32 @@ static void init_scan_timer(void) * corresponding to out and in bits respectively. * returns 1 if ok, 0 if error (in which case, nothing is written). */ -static int input_name2mask(const char *name, pmask_t *mask, pmask_t *value, - char *imask, char *omask) +static u8 input_name2mask(const char *name, __u64 *mask, __u64 *value, + u8 *imask, u8 *omask) { - static char sigtab[10] = "EeSsPpAaBb"; - char im, om; - pmask_t m, v; + const char sigtab[] = "EeSsPpAaBb"; + u8 im, om; + __u64 m, v; - om = 0ULL; - im = 0ULL; + om = 0; + im = 0; m = 0ULL; v = 0ULL; while (*name) { int in, out, bit, neg; + const char *idx; - for (in = 0; (in < sizeof(sigtab)) && (sigtab[in] != *name); - in++) - ; - - if (in >= sizeof(sigtab)) + idx = strchr(sigtab, *name); + if (!idx) return 0; /* input name not found */ + + in = idx - sigtab; neg = (in & 1); /* odd (lower) names are negated */ in >>= 1; im |= BIT(in); name++; - if (isdigit(*name)) { + if (*name >= '0' && *name <= '7') { out = *name - '0'; om |= BIT(out); } else if (*name == '-') { diff --git a/drivers/staging/Kconfig b/drivers/staging/Kconfig index 5d3b86a..5f9a97a 100644 --- a/drivers/staging/Kconfig +++ b/drivers/staging/Kconfig @@ -30,10 +30,6 @@ source "drivers/staging/wlan-ng/Kconfig" source "drivers/staging/comedi/Kconfig" -source "drivers/staging/olpc_dcon/Kconfig" - -source "drivers/staging/panel/Kconfig" - source "drivers/staging/rtl8192u/Kconfig" source "drivers/staging/rtl8192e/Kconfig" @@ -92,8 +88,6 @@ source "drivers/staging/lustre/Kconfig" source "drivers/staging/dgnc/Kconfig" -source "drivers/staging/dgap/Kconfig" - source "drivers/staging/gs_fpgaboot/Kconfig" source "drivers/staging/skein/Kconfig" diff --git a/drivers/staging/Makefile b/drivers/staging/Makefile index 30918ed..dbab17e 100644 --- a/drivers/staging/Makefile +++ b/drivers/staging/Makefile @@ -7,8 +7,6 @@ obj-y += media/ obj-$(CONFIG_SLICOSS) += slicoss/ obj-$(CONFIG_PRISM2_USB) += wlan-ng/ obj-$(CONFIG_COMEDI) += comedi/ -obj-$(CONFIG_FB_OLPC_DCON) += olpc_dcon/ -obj-$(CONFIG_PANEL) += panel/ obj-$(CONFIG_RTL8192U) += rtl8192u/ obj-$(CONFIG_RTL8192E) += rtl8192e/ obj-$(CONFIG_R8712U) += rtl8712/ @@ -37,7 +35,6 @@ obj-$(CONFIG_FIREWIRE_SERIAL) += fwserial/ obj-$(CONFIG_GOLDFISH) += goldfish/ obj-$(CONFIG_LUSTRE_FS) += lustre/ obj-$(CONFIG_DGNC) += dgnc/ -obj-$(CONFIG_DGAP) += dgap/ obj-$(CONFIG_MTD_SPINAND_MT29F) += mt29f_spinand/ obj-$(CONFIG_GS_FPGABOOT) += gs_fpgaboot/ obj-$(CONFIG_CRYPTO_SKEIN) += skein/ diff --git a/drivers/staging/dgap/Kconfig b/drivers/staging/dgap/Kconfig deleted file mode 100644 index 3bbe9e1..0000000 --- a/drivers/staging/dgap/Kconfig +++ /dev/null @@ -1,6 +0,0 @@ -config DGAP - tristate "Digi EPCA PCI products" - default n - depends on TTY && HAS_IOMEM - ---help--- - Driver for the Digi International EPCA PCI based product line diff --git a/drivers/staging/dgap/Makefile b/drivers/staging/dgap/Makefile deleted file mode 100644 index 0063d04..0000000 --- a/drivers/staging/dgap/Makefile +++ /dev/null @@ -1 +0,0 @@ -obj-$(CONFIG_DGAP) += dgap.o diff --git a/drivers/staging/dgap/dgap.c b/drivers/staging/dgap/dgap.c deleted file mode 100644 index bad3551..0000000 --- a/drivers/staging/dgap/dgap.c +++ /dev/null @@ -1,7079 +0,0 @@ -/* - * Copyright 2003 Digi International (www.digi.com) - * Scott H Kilau <Scott_Kilau at digi dot com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY, EXPRESS OR IMPLIED; without even the - * implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR - * PURPOSE. See the GNU General Public License for more details. - * - */ - -/* - * In the original out of kernel Digi dgap driver, firmware - * loading was done via user land to driver handshaking. - * - * For cards that support a concentrator (port expander), - * I believe the concentrator its self told the card which - * concentrator is actually attached and then that info - * was used to tell user land which concentrator firmware - * image was to be downloaded. I think even the BIOS or - * FEP images required could change with the connection - * of a particular concentrator. - * - * Since I have no access to any of these cards or - * concentrators, I cannot put the correct concentrator - * firmware file names into the firmware_info structure - * as is now done for the BIOS and FEP images. - * - * I think, but am not certain, that the cards supporting - * concentrators will function without them. So support - * of these cards has been left in this driver. - * - * In order to fully support those cards, they would - * either have to be acquired for dissection or maybe - * Digi International could provide some assistance. - */ -#undef DIGI_CONCENTRATORS_SUPPORTED - -#define pr_fmt(fmt) "dgap: " fmt - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/pci.h> -#include <linux/delay.h> /* For udelay */ -#include <linux/slab.h> -#include <linux/uaccess.h> -#include <linux/sched.h> - -#include <linux/interrupt.h> /* For tasklet and interrupt structs/defines */ -#include <linux/ctype.h> -#include <linux/tty.h> -#include <linux/tty_flip.h> -#include <linux/serial_reg.h> -#include <linux/io.h> /* For read[bwl]/write[bwl] */ - -#include <linux/string.h> -#include <linux/device.h> -#include <linux/kdev_t.h> -#include <linux/firmware.h> - -#include "dgap.h" - -/* - * File operations permitted on Control/Management major. - */ -static const struct file_operations dgap_board_fops = { - .owner = THIS_MODULE, -}; - -static uint dgap_numboards; -static struct board_t *dgap_board[MAXBOARDS]; -static ulong dgap_poll_counter; -static int dgap_driver_state = DRIVER_INITIALIZED; -static int dgap_poll_tick = 20; /* Poll interval - 20 ms */ - -static struct class *dgap_class; - -static uint dgap_count = 500; - -/* - * Poller stuff - */ -static DEFINE_SPINLOCK(dgap_poll_lock); /* Poll scheduling lock */ -static ulong dgap_poll_time; /* Time of next poll */ -static uint dgap_poll_stop; /* Used to tell poller to stop */ -static struct timer_list dgap_poll_timer; - -/* - SUPPORTED PRODUCTS - - Card Model Number of Ports Interface - ---------------------------------------------------------------- - Acceleport Xem 4 - 64 (EIA232 & EIA422) - Acceleport Xr 4 & 8 (EIA232) - Acceleport Xr 920 4 & 8 (EIA232) - Acceleport C/X 8 - 128 (EIA232) - Acceleport EPC/X 8 - 224 (EIA232) - Acceleport Xr/422 4 & 8 (EIA422) - Acceleport 2r/920 2 (EIA232) - Acceleport 4r/920 4 (EIA232) - Acceleport 8r/920 8 (EIA232) - - IBM 8-Port Asynchronous PCI Adapter (EIA232) - IBM 128-Port Asynchronous PCI Adapter (EIA232 & EIA422) -*/ - -static struct pci_device_id dgap_pci_tbl[] = { - { DIGI_VID, PCI_DEV_XEM_DID, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0 }, - { DIGI_VID, PCI_DEV_CX_DID, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 1 }, - { DIGI_VID, PCI_DEV_CX_IBM_DID, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 2 }, - { DIGI_VID, PCI_DEV_EPCJ_DID, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 3 }, - { DIGI_VID, PCI_DEV_920_2_DID, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 4 }, - { DIGI_VID, PCI_DEV_920_4_DID, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 5 }, - { DIGI_VID, PCI_DEV_920_8_DID, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 6 }, - { DIGI_VID, PCI_DEV_XR_DID, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 7 }, - { DIGI_VID, PCI_DEV_XRJ_DID, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 8 }, - { DIGI_VID, PCI_DEV_XR_422_DID, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 9 }, - { DIGI_VID, PCI_DEV_XR_IBM_DID, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 10 }, - { DIGI_VID, PCI_DEV_XR_SAIP_DID, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 11 }, - { DIGI_VID, PCI_DEV_XR_BULL_DID, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 12 }, - { DIGI_VID, PCI_DEV_920_8_HP_DID, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 13 }, - { DIGI_VID, PCI_DEV_XEM_HP_DID, PCI_ANY_ID, PCI_ANY_ID, 0, 0, 14 }, - {0,} /* 0 terminated list. */ -}; -MODULE_DEVICE_TABLE(pci, dgap_pci_tbl); - -/* - * A generic list of Product names, PCI Vendor ID, and PCI Device ID. - */ -struct board_id { - uint config_type; - u8 *name; - uint maxports; - uint dpatype; -}; - -static struct board_id dgap_ids[] = { - {PPCM, PCI_DEV_XEM_NAME, 64, (T_PCXM | T_PCLITE | T_PCIBUS)}, - {PCX, PCI_DEV_CX_NAME, 128, (T_CX | T_PCIBUS) }, - {PCX, PCI_DEV_CX_IBM_NAME, 128, (T_CX | T_PCIBUS) }, - {PEPC, PCI_DEV_EPCJ_NAME, 224, (T_EPC | T_PCIBUS) }, - {APORT2_920P, PCI_DEV_920_2_NAME, 2, (T_PCXR | T_PCLITE | T_PCIBUS)}, - {APORT4_920P, PCI_DEV_920_4_NAME, 4, (T_PCXR | T_PCLITE | T_PCIBUS)}, - {APORT8_920P, PCI_DEV_920_8_NAME, 8, (T_PCXR | T_PCLITE | T_PCIBUS)}, - {PAPORT8, PCI_DEV_XR_NAME, 8, (T_PCXR | T_PCLITE | T_PCIBUS)}, - {PAPORT8, PCI_DEV_XRJ_NAME, 8, (T_PCXR | T_PCLITE | T_PCIBUS)}, - {PAPORT8, PCI_DEV_XR_422_NAME, 8, (T_PCXR | T_PCLITE | T_PCIBUS)}, - {PAPORT8, PCI_DEV_XR_IBM_NAME, 8, (T_PCXR | T_PCLITE | T_PCIBUS)}, - {PAPORT8, PCI_DEV_XR_SAIP_NAME, 8, (T_PCXR | T_PCLITE | T_PCIBUS)}, - {PAPORT8, PCI_DEV_XR_BULL_NAME, 8, (T_PCXR | T_PCLITE | T_PCIBUS)}, - {APORT8_920P, PCI_DEV_920_8_HP_NAME, 8, (T_PCXR | T_PCLITE | T_PCIBUS)}, - {PPCM, PCI_DEV_XEM_HP_NAME, 64, (T_PCXM | T_PCLITE | T_PCIBUS)}, - {0,} /* 0 terminated list. */ -}; - -struct firmware_info { - u8 *conf_name; /* dgap.conf */ - u8 *bios_name; /* BIOS filename */ - u8 *fep_name; /* FEP filename */ - u8 *con_name; /* Concentrator filename FIXME*/ - int num; /* sequence number */ -}; - -/* - * Firmware - BIOS, FEP, and CONC filenames - */ -static struct firmware_info fw_info[] = { - { "dgap/dgap.conf", "dgap/sxbios.bin", "dgap/sxfep.bin", NULL, 0 }, - { "dgap/dgap.conf", "dgap/cxpbios.bin", "dgap/cxpfep.bin", NULL, 1 }, - { "dgap/dgap.conf", "dgap/cxpbios.bin", "dgap/cxpfep.bin", NULL, 2 }, - { "dgap/dgap.conf", "dgap/pcibios.bin", "dgap/pcifep.bin", NULL, 3 }, - { "dgap/dgap.conf", "dgap/xrbios.bin", "dgap/xrfep.bin", NULL, 4 }, - { "dgap/dgap.conf", "dgap/xrbios.bin", "dgap/xrfep.bin", NULL, 5 }, - { "dgap/dgap.conf", "dgap/xrbios.bin", "dgap/xrfep.bin", NULL, 6 }, - { "dgap/dgap.conf", "dgap/xrbios.bin", "dgap/xrfep.bin", NULL, 7 }, - { "dgap/dgap.conf", "dgap/xrbios.bin", "dgap/xrfep.bin", NULL, 8 }, - { "dgap/dgap.conf", "dgap/xrbios.bin", "dgap/xrfep.bin", NULL, 9 }, - { "dgap/dgap.conf", "dgap/xrbios.bin", "dgap/xrfep.bin", NULL, 10 }, - { "dgap/dgap.conf", "dgap/xrbios.bin", "dgap/xrfep.bin", NULL, 11 }, - { "dgap/dgap.conf", "dgap/xrbios.bin", "dgap/xrfep.bin", NULL, 12 }, - { "dgap/dgap.conf", "dgap/xrbios.bin", "dgap/xrfep.bin", NULL, 13 }, - { "dgap/dgap.conf", "dgap/sxbios.bin", "dgap/sxfep.bin", NULL, 14 }, - {NULL,} -}; - -/* - * Default transparent print information. - */ -static struct digi_t dgap_digi_init = { - .digi_flags = DIGI_COOK, /* Flags */ - .digi_maxcps = 100, /* Max CPS */ - .digi_maxchar = 50, /* Max chars in print queue */ - .digi_bufsize = 100, /* Printer buffer size */ - .digi_onlen = 4, /* size of printer on string */ - .digi_offlen = 4, /* size of printer off string */ - .digi_onstr = "\033[5i", /* ANSI printer on string ] */ - .digi_offstr = "\033[4i", /* ANSI printer off string ] */ - .digi_term = "ansi" /* default terminal type */ -}; - -/* - * Define a local default termios struct. All ports will be created - * with this termios initially. - * - * This defines a raw port at 9600 baud, 8 data bits, no parity, - * 1 stop bit. - */ - -static struct ktermios dgap_default_termios = { - .c_iflag = (DEFAULT_IFLAGS), /* iflags */ - .c_oflag = (DEFAULT_OFLAGS), /* oflags */ - .c_cflag = (DEFAULT_CFLAGS), /* cflags */ - .c_lflag = (DEFAULT_LFLAGS), /* lflags */ - .c_cc = INIT_C_CC, - .c_line = 0, -}; - -/* - * Our needed internal static variables from dgap_parse.c - */ -static struct cnode dgap_head; -#define MAXCWORD 200 -static char dgap_cword[MAXCWORD]; - -struct toklist { - int token; - char *string; -}; - -static struct toklist dgap_brdtype[] = { - { PCX, "Digi_AccelePort_C/X_PCI" }, - { PEPC, "Digi_AccelePort_EPC/X_PCI" }, - { PPCM, "Digi_AccelePort_Xem_PCI" }, - { APORT2_920P, "Digi_AccelePort_2r_920_PCI" }, - { APORT4_920P, "Digi_AccelePort_4r_920_PCI" }, - { APORT8_920P, "Digi_AccelePort_8r_920_PCI" }, - { PAPORT4, "Digi_AccelePort_4r_PCI(EIA-232/RS-422)" }, - { PAPORT8, "Digi_AccelePort_8r_PCI(EIA-232/RS-422)" }, - { 0, NULL } -}; - -static struct toklist dgap_tlist[] = { - { BEGIN, "config_begin" }, - { END, "config_end" }, - { BOARD, "board" }, - { PCIINFO, "pciinfo" }, - { LINE, "line" }, - { CONC, "conc" }, - { CONC, "concentrator" }, - { CX, "cx" }, - { CX, "ccon" }, - { EPC, "epccon" }, - { EPC, "epc" }, - { MOD, "module" }, - { ID, "id" }, - { STARTO, "start" }, - { SPEED, "speed" }, - { CABLE, "cable" }, - { CONNECT, "connect" }, - { METHOD, "method" }, - { STATUS, "status" }, - { CUSTOM, "Custom" }, - { BASIC, "Basic" }, - { MEM, "mem" }, - { MEM, "memory" }, - { PORTS, "ports" }, - { MODEM, "modem" }, - { NPORTS, "nports" }, - { TTYN, "ttyname" }, - { CU, "cuname" }, - { PRINT, "prname" }, - { CMAJOR, "major" }, - { ALTPIN, "altpin" }, - { USEINTR, "useintr" }, - { TTSIZ, "ttysize" }, - { CHSIZ, "chsize" }, - { BSSIZ, "boardsize" }, - { UNTSIZ, "schedsize" }, - { F2SIZ, "f2200size" }, - { VPSIZ, "vpixsize" }, - { 0, NULL } -}; - -/* - * get a word from the input stream, also keep track of current line number. - * words are separated by whitespace. - */ -static char *dgap_getword(char **in) -{ - char *ret_ptr = *in; - - char *ptr = strpbrk(*in, " \t\n"); - - /* If no word found, return null */ - if (!ptr) - return NULL; - - /* Mark new location for our buffer */ - *ptr = '\0'; - *in = ptr + 1; - - /* Eat any extra spaces/tabs/newlines that might be present */ - while (*in && **in && ((**in == ' ') || - (**in == '\t') || - (**in == '\n'))) { - **in = '\0'; - *in = *in + 1; - } - - return ret_ptr; -} - - -/* - * Get a token from the input file; return 0 if end of file is reached - */ -static int dgap_gettok(char **in) -{ - char *w; - struct toklist *t; - - if (strstr(dgap_cword, "board")) { - w = dgap_getword(in); - if (!w) - return 0; - snprintf(dgap_cword, MAXCWORD, "%s", w); - for (t = dgap_brdtype; t->token != 0; t++) { - if (!strcmp(w, t->string)) - return t->token; - } - } else { - while ((w = dgap_getword(in))) { - snprintf(dgap_cword, MAXCWORD, "%s", w); - for (t = dgap_tlist; t->token != 0; t++) { - if (!strcmp(w, t->string)) - return t->token; - } - } - } - - return 0; -} - -/* - * dgap_checknode: see if all the necessary info has been supplied for a node - * before creating the next node. - */ -static int dgap_checknode(struct cnode *p) -{ - switch (p->type) { - case LNODE: - if (p->u.line.v_speed == 0) { - pr_err("line speed not specified"); - return 1; - } - return 0; - - case CNODE: - if (p->u.conc.v_speed == 0) { - pr_err("concentrator line speed not specified"); - return 1; - } - if (p->u.conc.v_nport == 0) { - pr_err("number of ports on concentrator not specified"); - return 1; - } - if (p->u.conc.v_id == 0) { - pr_err("concentrator id letter not specified"); - return 1; - } - return 0; - - case MNODE: - if (p->u.module.v_nport == 0) { - pr_err("number of ports on EBI module not specified"); - return 1; - } - if (p->u.module.v_id == 0) { - pr_err("EBI module id letter not specified"); - return 1; - } - return 0; - } - return 0; -} - -/* - * Given a board pointer, returns whether we should use interrupts or not. - */ -static uint dgap_config_get_useintr(struct board_t *bd) -{ - struct cnode *p; - - if (!bd) - return 0; - - for (p = bd->bd_config; p; p = p->next) { - if (p->type == INTRNODE) { - /* - * check for pcxr types. - */ - return p->u.useintr; - } - } - - /* If not found, then don't turn on interrupts. */ - return 0; -} - -/* - * Given a board pointer, returns whether we turn on altpin or not. - */ -static uint dgap_config_get_altpin(struct board_t *bd) -{ - struct cnode *p; - - if (!bd) - return 0; - - for (p = bd->bd_config; p; p = p->next) { - if (p->type == ANODE) { - /* - * check for pcxr types. - */ - return p->u.altpin; - } - } - - /* If not found, then don't turn on interrupts. */ - return 0; -} - -/* - * Given a specific type of board, if found, detached link and - * returns the first occurrence in the list. - */ -static struct cnode *dgap_find_config(int type, int bus, int slot) -{ - struct cnode *p, *prev, *prev2, *found; - - p = &dgap_head; - - while (p->next) { - prev = p; - p = p->next; - - if (p->type != BNODE) - continue; - - if (p->u.board.type != type) - continue; - - if (p->u.board.v_pcibus && - p->u.board.pcibus != bus) - continue; - - if (p->u.board.v_pcislot && - p->u.board.pcislot != slot) - continue; - - found = p; - /* - * Keep walking thru the list till we - * find the next board. - */ - while (p->next) { - prev2 = p; - p = p->next; - - if (p->type != BNODE) - continue; - - /* - * Mark the end of our 1 board - * chain of configs. - */ - prev2->next = NULL; - - /* - * Link the "next" board to the - * previous board, effectively - * "unlinking" our board from - * the main config. - */ - prev->next = p; - - return found; - } - /* - * It must be the last board in the list. - */ - prev->next = NULL; - return found; - } - return NULL; -} - -/* - * Given a board pointer, walks the config link, counting up - * all ports user specified should be on the board. - * (This does NOT mean they are all actually present right now tho) - */ -static uint dgap_config_get_num_prts(struct board_t *bd) -{ - int count = 0; - struct cnode *p; - - if (!bd) - return 0; - - for (p = bd->bd_config; p; p = p->next) { - switch (p->type) { - case BNODE: - /* - * check for pcxr types. - */ - if (p->u.board.type > EPCFE) - count += p->u.board.nport; - break; - case CNODE: - count += p->u.conc.nport; - break; - case MNODE: - count += p->u.module.nport; - break; - } - } - return count; -} - -static char *dgap_create_config_string(struct board_t *bd, char *string) -{ - char *ptr = string; - struct cnode *p; - struct cnode *q; - int speed; - - if (!bd) { - *ptr = 0xff; - return string; - } - - for (p = bd->bd_config; p; p = p->next) { - switch (p->type) { - case LNODE: - *ptr = '\0'; - ptr++; - *ptr = p->u.line.speed; - ptr++; - break; - case CNODE: - /* - * Because the EPC/con concentrators can have EM modules - * hanging off of them, we have to walk ahead in the - * list and keep adding the number of ports on each EM - * to the config. UGH! - */ - speed = p->u.conc.speed; - q = p->next; - if (q && (q->type == MNODE)) { - *ptr = (p->u.conc.nport + 0x80); - ptr++; - p = q; - while (q->next && (q->next->type) == MNODE) { - *ptr = (q->u.module.nport + 0x80); - ptr++; - p = q; - q = q->next; - } - *ptr = q->u.module.nport; - ptr++; - } else { - *ptr = p->u.conc.nport; - ptr++; - } - - *ptr = speed; - ptr++; - break; - } - } - - *ptr = 0xff; - return string; -} - -/* - * Parse a configuration file read into memory as a string. - */ -static int dgap_parsefile(char **in) -{ - struct cnode *p, *brd, *line, *conc; - int rc; - char *s; - int linecnt = 0; - - p = &dgap_head; - brd = line = conc = NULL; - - /* perhaps we are adding to an existing list? */ - while (p->next) - p = p->next; - - /* file must start with a BEGIN */ - while ((rc = dgap_gettok(in)) != BEGIN) { - if (rc == 0) { - pr_err("unexpected EOF"); - return -1; - } - } - - for (; ;) { - int board_type = 0; - int conc_type = 0; - int module_type = 0; - - rc = dgap_gettok(in); - if (rc == 0) { - pr_err("unexpected EOF"); - return -1; - } - - switch (rc) { - case BEGIN: /* should only be 1 begin */ - pr_err("unexpected config_begin\n"); - return -1; - - case END: - return 0; - - case BOARD: /* board info */ - if (dgap_checknode(p)) - return -1; - - p->next = kzalloc(sizeof(struct cnode), GFP_KERNEL); - if (!p->next) - return -ENOMEM; - - p = p->next; - - p->type = BNODE; - p->u.board.status = kstrdup("No", GFP_KERNEL); - line = conc = NULL; - brd = p; - linecnt = -1; - - board_type = dgap_gettok(in); - if (board_type == 0) { - pr_err("board !!type not specified"); - return -1; - } - - p->u.board.type = board_type; - - break; - - case MEM: /* memory address */ - if (p->type != BNODE) { - pr_err("memory address only valid for boards"); - return -1; - } - s = dgap_getword(in); - if (!s) { - pr_err("unexpected end of file"); - return -1; - } - kfree(p->u.board.addrstr); - p->u.board.addrstr = kstrdup(s, GFP_KERNEL); - if (kstrtoul(s, 0, &p->u.board.addr)) { - pr_err("bad number for memory address"); - return -1; - } - p->u.board.v_addr = 1; - break; - - case PCIINFO: /* pci information */ - if (p->type != BNODE) { - pr_err("memory address only valid for boards"); - return -1; - } - s = dgap_getword(in); - if (!s) { - pr_err("unexpected end of file"); - return -1; - } - kfree(p->u.board.pcibusstr); - p->u.board.pcibusstr = kstrdup(s, GFP_KERNEL); - if (kstrtoul(s, 0, &p->u.board.pcibus)) { - pr_err("bad number for pci bus"); - return -1; - } - p->u.board.v_pcibus = 1; - s = dgap_getword(in); - if (!s) { - pr_err("unexpected end of file"); - return -1; - } - kfree(p->u.board.pcislotstr); - p->u.board.pcislotstr = kstrdup(s, GFP_KERNEL); - if (kstrtoul(s, 0, &p->u.board.pcislot)) { - pr_err("bad number for pci slot"); - return -1; - } - p->u.board.v_pcislot = 1; - break; - - case METHOD: - if (p->type != BNODE) { - pr_err("install method only valid for boards"); - return -1; - } - s = dgap_getword(in); - if (!s) { - pr_err("unexpected end of file"); - return -1; - } - kfree(p->u.board.method); - p->u.board.method = kstrdup(s, GFP_KERNEL); - p->u.board.v_method = 1; - break; - - case STATUS: - if (p->type != BNODE) { - pr_err("config status only valid for boards"); - return -1; - } - s = dgap_getword(in); - if (!s) { - pr_err("unexpected end of file"); - return -1; - } - kfree(p->u.board.status); - p->u.board.status = kstrdup(s, GFP_KERNEL); - break; - - case NPORTS: /* number of ports */ - if (p->type == BNODE) { - s = dgap_getword(in); - if (!s) { - pr_err("unexpected end of file"); - return -1; - } - if (kstrtol(s, 0, &p->u.board.nport)) { - pr_err("bad number for number of ports"); - return -1; - } - p->u.board.v_nport = 1; - } else if (p->type == CNODE) { - s = dgap_getword(in); - if (!s) { - pr_err("unexpected end of file"); - return -1; - } - if (kstrtol(s, 0, &p->u.conc.nport)) { - pr_err("bad number for number of ports"); - return -1; - } - p->u.conc.v_nport = 1; - } else if (p->type == MNODE) { - s = dgap_getword(in); - if (!s) { - pr_err("unexpected end of file"); - return -1; - } - if (kstrtol(s, 0, &p->u.module.nport)) { - pr_err("bad number for number of ports"); - return -1; - } - p->u.module.v_nport = 1; - } else { - pr_err("nports only valid for concentrators or modules"); - return -1; - } - break; - - case ID: /* letter ID used in tty name */ - s = dgap_getword(in); - if (!s) { - pr_err("unexpected end of file"); - return -1; - } - kfree(p->u.board.status); - p->u.board.status = kstrdup(s, GFP_KERNEL); - - if (p->type == CNODE) { - kfree(p->u.conc.id); - p->u.conc.id = kstrdup(s, GFP_KERNEL); - p->u.conc.v_id = 1; - } else if (p->type == MNODE) { - kfree(p->u.module.id); - p->u.module.id = kstrdup(s, GFP_KERNEL); - p->u.module.v_id = 1; - } else { - pr_err("id only valid for concentrators or modules"); - return -1; - } - break; - - case STARTO: /* start offset of ID */ - if (p->type == BNODE) { - s = dgap_getword(in); - if (!s) { - pr_err("unexpected end of file"); - return -1; - } - if (kstrtol(s, 0, &p->u.board.start)) { - pr_err("bad number for start of tty count"); - return -1; - } - p->u.board.v_start = 1; - } else if (p->type == CNODE) { - s = dgap_getword(in); - if (!s) { - pr_err("unexpected end of file"); - return -1; - } - if (kstrtol(s, 0, &p->u.conc.start)) { - pr_err("bad number for start of tty count"); - return -1; - } - p->u.conc.v_start = 1; - } else if (p->type == MNODE) { - s = dgap_getword(in); - if (!s) { - pr_err("unexpected end of file"); - return -1; - } - if (kstrtol(s, 0, &p->u.module.start)) { - pr_err("bad number for start of tty count"); - return -1; - } - p->u.module.v_start = 1; - } else { - pr_err("start only valid for concentrators or modules"); - return -1; - } - break; - - case TTYN: /* tty name prefix */ - if (dgap_checknode(p)) - return -1; - - p->next = kzalloc(sizeof(struct cnode), GFP_KERNEL); - if (!p->next) - return -ENOMEM; - - p = p->next; - p->type = TNODE; - - s = dgap_getword(in); - if (!s) { - pr_err("unexpeced end of file"); - return -1; - } - p->u.ttyname = kstrdup(s, GFP_KERNEL); - if (!p->u.ttyname) - return -1; - - break; - - case CU: /* cu name prefix */ - if (dgap_checknode(p)) - return -1; - - p->next = kzalloc(sizeof(struct cnode), GFP_KERNEL); - if (!p->next) - return -ENOMEM; - - p = p->next; - p->type = CUNODE; - - s = dgap_getword(in); - if (!s) { - pr_err("unexpeced end of file"); - return -1; - } - p->u.cuname = kstrdup(s, GFP_KERNEL); - if (!p->u.cuname) - return -1; - - break; - - case LINE: /* line information */ - if (dgap_checknode(p)) - return -1; - if (!brd) { - pr_err("must specify board before line info"); - return -1; - } - switch (brd->u.board.type) { - case PPCM: - pr_err("line not valid for PC/em"); - return -1; - } - - p->next = kzalloc(sizeof(struct cnode), GFP_KERNEL); - if (!p->next) - return -ENOMEM; - - p = p->next; - p->type = LNODE; - conc = NULL; - line = p; - linecnt++; - break; - - case CONC: /* concentrator information */ - if (dgap_checknode(p)) - return -1; - if (!line) { - pr_err("must specify line info before concentrator"); - return -1; - } - - p->next = kzalloc(sizeof(struct cnode), GFP_KERNEL); - if (!p->next) - return -ENOMEM; - - p = p->next; - p->type = CNODE; - conc = p; - - if (linecnt) - brd->u.board.conc2++; - else - brd->u.board.conc1++; - - conc_type = dgap_gettok(in); - if (conc_type == 0 || - (conc_type != CX && conc_type != EPC)) { - pr_err("failed to set a type of concentratros"); - return -1; - } - - p->u.conc.type = conc_type; - - break; - - case MOD: /* EBI module */ - if (dgap_checknode(p)) - return -1; - if (!brd) { - pr_err("must specify board info before EBI modules"); - return -1; - } - switch (brd->u.board.type) { - case PPCM: - linecnt = 0; - break; - default: - if (!conc) { - pr_err("must specify concentrator info before EBI module"); - return -1; - } - } - - p->next = kzalloc(sizeof(struct cnode), GFP_KERNEL); - if (!p->next) - return -ENOMEM; - - p = p->next; - p->type = MNODE; - - if (linecnt) - brd->u.board.module2++; - else - brd->u.board.module1++; - - module_type = dgap_gettok(in); - if (module_type == 0 || - (module_type != PORTS && module_type != MODEM)) { - pr_err("failed to set a type of module"); - return -1; - } - - p->u.module.type = module_type; - - break; - - case CABLE: - if (p->type == LNODE) { - s = dgap_getword(in); - if (!s) { - pr_err("unexpected end of file"); - return -1; - } - kfree(p->u.line.cable); - p->u.line.cable = kstrdup(s, GFP_KERNEL); - p->u.line.v_cable = 1; - } - break; - - case SPEED: /* sync line speed indication */ - if (p->type == LNODE) { - s = dgap_getword(in); - if (!s) { - pr_err("unexpected end of file"); - return -1; - } - if (kstrtol(s, 0, &p->u.line.speed)) { - pr_err("bad number for line speed"); - return -1; - } - p->u.line.v_speed = 1; - } else if (p->type == CNODE) { - s = dgap_getword(in); - if (!s) { - pr_err("unexpected end of file"); - return -1; - } - if (kstrtol(s, 0, &p->u.conc.speed)) { - pr_err("bad number for line speed"); - return -1; - } - p->u.conc.v_speed = 1; - } else { - pr_err("speed valid only for lines or concentrators."); - return -1; - } - break; - - case CONNECT: - if (p->type == CNODE) { - s = dgap_getword(in); - if (!s) { - pr_err("unexpected end of file"); - return -1; - } - kfree(p->u.conc.connect); - p->u.conc.connect = kstrdup(s, GFP_KERNEL); - p->u.conc.v_connect = 1; - } - break; - case PRINT: /* transparent print name prefix */ - if (dgap_checknode(p)) - return -1; - - p->next = kzalloc(sizeof(struct cnode), GFP_KERNEL); - if (!p->next) - return -ENOMEM; - - p = p->next; - p->type = PNODE; - - s = dgap_getword(in); - if (!s) { - pr_err("unexpeced end of file"); - return -1; - } - p->u.printname = kstrdup(s, GFP_KERNEL); - if (!p->u.printname) - return -1; - - break; - - case CMAJOR: /* major number */ - if (dgap_checknode(p)) - return -1; - - p->next = kzalloc(sizeof(struct cnode), GFP_KERNEL); - if (!p->next) - return -ENOMEM; - - p = p->next; - p->type = JNODE; - - s = dgap_getword(in); - if (!s) { - pr_err("unexpected end of file"); - return -1; - } - if (kstrtol(s, 0, &p->u.majornumber)) { - pr_err("bad number for major number"); - return -1; - } - break; - - case ALTPIN: /* altpin setting */ - if (dgap_checknode(p)) - return -1; - - p->next = kzalloc(sizeof(struct cnode), GFP_KERNEL); - if (!p->next) - return -ENOMEM; - - p = p->next; - p->type = ANODE; - - s = dgap_getword(in); - if (!s) { - pr_err("unexpected end of file"); - return -1; - } - if (kstrtol(s, 0, &p->u.altpin)) { - pr_err("bad number for altpin"); - return -1; - } - break; - - case USEINTR: /* enable interrupt setting */ - if (dgap_checknode(p)) - return -1; - - p->next = kzalloc(sizeof(struct cnode), GFP_KERNEL); - if (!p->next) - return -ENOMEM; - - p = p->next; - p->type = INTRNODE; - s = dgap_getword(in); - if (!s) { - pr_err("unexpected end of file"); - return -1; - } - if (kstrtol(s, 0, &p->u.useintr)) { - pr_err("bad number for useintr"); - return -1; - } - break; - - case TTSIZ: /* size of tty structure */ - if (dgap_checknode(p)) - return -1; - - p->next = kzalloc(sizeof(struct cnode), GFP_KERNEL); - if (!p->next) - return -ENOMEM; - - p = p->next; - p->type = TSNODE; - - s = dgap_getword(in); - if (!s) { - pr_err("unexpected end of file"); - return -1; - } - if (kstrtol(s, 0, &p->u.ttysize)) { - pr_err("bad number for ttysize"); - return -1; - } - break; - - case CHSIZ: /* channel structure size */ - if (dgap_checknode(p)) - return -1; - - p->next = kzalloc(sizeof(struct cnode), GFP_KERNEL); - if (!p->next) - return -ENOMEM; - - p = p->next; - p->type = CSNODE; - - s = dgap_getword(in); - if (!s) { - pr_err("unexpected end of file"); - return -1; - } - if (kstrtol(s, 0, &p->u.chsize)) { - pr_err("bad number for chsize"); - return -1; - } - break; - - case BSSIZ: /* board structure size */ - if (dgap_checknode(p)) - return -1; - - p->next = kzalloc(sizeof(struct cnode), GFP_KERNEL); - if (!p->next) - return -ENOMEM; - - p = p->next; - p->type = BSNODE; - - s = dgap_getword(in); - if (!s) { - pr_err("unexpected end of file"); - return -1; - } - if (kstrtol(s, 0, &p->u.bssize)) { - pr_err("bad number for bssize"); - return -1; - } - break; - - case UNTSIZ: /* sched structure size */ - if (dgap_checknode(p)) - return -1; - - p->next = kzalloc(sizeof(struct cnode), GFP_KERNEL); - if (!p->next) - return -ENOMEM; - - p = p->next; - p->type = USNODE; - - s = dgap_getword(in); - if (!s) { - pr_err("unexpected end of file"); - return -1; - } - if (kstrtol(s, 0, &p->u.unsize)) { - pr_err("bad number for schedsize"); - return -1; - } - break; - - case F2SIZ: /* f2200 structure size */ - if (dgap_checknode(p)) - return -1; - - p->next = kzalloc(sizeof(struct cnode), GFP_KERNEL); - if (!p->next) - return -ENOMEM; - - p = p->next; - p->type = FSNODE; - - s = dgap_getword(in); - if (!s) { - pr_err("unexpected end of file"); - return -1; - } - if (kstrtol(s, 0, &p->u.f2size)) { - pr_err("bad number for f2200size"); - return -1; - } - break; - - case VPSIZ: /* vpix structure size */ - if (dgap_checknode(p)) - return -1; - - p->next = kzalloc(sizeof(struct cnode), GFP_KERNEL); - if (!p->next) - return -ENOMEM; - - p = p->next; - p->type = VSNODE; - - s = dgap_getword(in); - if (!s) { - pr_err("unexpected end of file"); - return -1; - } - if (kstrtol(s, 0, &p->u.vpixsize)) { - pr_err("bad number for vpixsize"); - return -1; - } - break; - } - } -} - -static void dgap_cleanup_nodes(void) -{ - struct cnode *p; - - p = &dgap_head; - - while (p) { - struct cnode *tmp = p->next; - - if (p->type == NULLNODE) { - p = tmp; - continue; - } - - switch (p->type) { - case BNODE: - kfree(p->u.board.addrstr); - kfree(p->u.board.pcibusstr); - kfree(p->u.board.pcislotstr); - kfree(p->u.board.method); - break; - case CNODE: - kfree(p->u.conc.id); - kfree(p->u.conc.connect); - break; - case MNODE: - kfree(p->u.module.id); - break; - case TNODE: - kfree(p->u.ttyname); - break; - case CUNODE: - kfree(p->u.cuname); - break; - case LNODE: - kfree(p->u.line.cable); - break; - case PNODE: - kfree(p->u.printname); - break; - } - - kfree(p->u.board.status); - kfree(p); - p = tmp; - } -} - -/* - * Retrives the current custom baud rate from FEP memory, - * and returns it back to the user. - * Returns 0 on error. - */ -static uint dgap_get_custom_baud(struct channel_t *ch) -{ - u8 __iomem *vaddr; - ulong offset; - - if (!ch || ch->magic != DGAP_CHANNEL_MAGIC) - return 0; - - if (!ch->ch_bd || ch->ch_bd->magic != DGAP_BOARD_MAGIC) - return 0; - - if (!(ch->ch_bd->bd_flags & BD_FEP5PLUS)) - return 0; - - vaddr = ch->ch_bd->re_map_membase; - - if (!vaddr) - return 0; - - /* - * Go get from fep mem, what the fep - * believes the custom baud rate is. - */ - offset = (ioread16(vaddr + ECS_SEG) << 4) + (ch->ch_portnum * 0x28) - + LINE_SPEED; - - return readw(vaddr + offset); -} - -/* - * Remap PCI memory. - */ -static int dgap_remap(struct board_t *brd) -{ - if (!brd || brd->magic != DGAP_BOARD_MAGIC) - return -EIO; - - if (!request_mem_region(brd->membase, 0x200000, "dgap")) - return -ENOMEM; - - if (!request_mem_region(brd->membase + PCI_IO_OFFSET, 0x200000, "dgap")) - goto err_req_mem; - - brd->re_map_membase = ioremap(brd->membase, 0x200000); - if (!brd->re_map_membase) - goto err_remap_mem; - - brd->re_map_port = ioremap((brd->membase + PCI_IO_OFFSET), 0x200000); - if (!brd->re_map_port) - goto err_remap_port; - - return 0; - -err_remap_port: - iounmap(brd->re_map_membase); -err_remap_mem: - release_mem_region(brd->membase + PCI_IO_OFFSET, 0x200000); -err_req_mem: - release_mem_region(brd->membase, 0x200000); - - return -ENOMEM; -} - -static void dgap_unmap(struct board_t *brd) -{ - iounmap(brd->re_map_port); - iounmap(brd->re_map_membase); - release_mem_region(brd->membase + PCI_IO_OFFSET, 0x200000); - release_mem_region(brd->membase, 0x200000); -} - -/* - * dgap_parity_scan() - * - * Convert the FEP5 way of reporting parity errors and breaks into - * the Linux line discipline way. - */ -static void dgap_parity_scan(struct channel_t *ch, unsigned char *cbuf, - unsigned char *fbuf, int *len) -{ - int l = *len; - int count = 0; - unsigned char *in, *cout, *fout; - unsigned char c; - - in = cbuf; - cout = cbuf; - fout = fbuf; - - if (!ch || ch->magic != DGAP_CHANNEL_MAGIC) - return; - - while (l--) { - c = *in++; - switch (ch->pscan_state) { - default: - /* reset to sanity and fall through */ - ch->pscan_state = 0; - - case 0: - /* No FF seen yet */ - if (c == (unsigned char)'\377') - /* delete this character from stream */ - ch->pscan_state = 1; - else { - *cout++ = c; - *fout++ = TTY_NORMAL; - count += 1; - } - break; - - case 1: - /* first FF seen */ - if (c == (unsigned char)'\377') { - /* doubled ff, transform to single ff */ - *cout++ = c; - *fout++ = TTY_NORMAL; - count += 1; - ch->pscan_state = 0; - } else { - /* save value examination in next state */ - ch->pscan_savechar = c; - ch->pscan_state = 2; - } - break; - - case 2: - /* third character of ff sequence */ - - *cout++ = c; - - if (ch->pscan_savechar == 0x0) { - if (c == 0x0) { - ch->ch_err_break++; - *fout++ = TTY_BREAK; - } else { - ch->ch_err_parity++; - *fout++ = TTY_PARITY; - } - } - - count += 1; - ch->pscan_state = 0; - } - } - *len = count; -} - -/*======================================================================= - * - * dgap_input - Process received data. - * - * ch - Pointer to channel structure. - * - *=======================================================================*/ - -static void dgap_input(struct channel_t *ch) -{ - struct board_t *bd; - struct bs_t __iomem *bs; - struct tty_struct *tp; - struct tty_ldisc *ld; - uint rmask; - uint head; - uint tail; - int data_len; - ulong lock_flags; - ulong lock_flags2; - int flip_len; - int len; - int n; - u8 *buf; - u8 tmpchar; - int s; - - if (!ch || ch->magic != DGAP_CHANNEL_MAGIC) - return; - - tp = ch->ch_tun.un_tty; - - bs = ch->ch_bs; - if (!bs) - return; - - bd = ch->ch_bd; - if (!bd || bd->magic != DGAP_BOARD_MAGIC) - return; - - spin_lock_irqsave(&bd->bd_lock, lock_flags); - spin_lock_irqsave(&ch->ch_lock, lock_flags2); - - /* - * Figure the number of characters in the buffer. - * Exit immediately if none. - */ - - rmask = ch->ch_rsize - 1; - - head = readw(&bs->rx_head); - head &= rmask; - tail = readw(&bs->rx_tail); - tail &= rmask; - - data_len = (head - tail) & rmask; - - if (data_len == 0) { - writeb(1, &bs->idata); - spin_unlock_irqrestore(&ch->ch_lock, lock_flags2); - spin_unlock_irqrestore(&bd->bd_lock, lock_flags); - return; - } - - /* - * If the device is not open, or CREAD is off, flush - * input data and return immediately. - */ - if ((bd->state != BOARD_READY) || !tp || - (tp->magic != TTY_MAGIC) || - !(ch->ch_tun.un_flags & UN_ISOPEN) || - !(tp->termios.c_cflag & CREAD) || - (ch->ch_tun.un_flags & UN_CLOSING)) { - writew(head, &bs->rx_tail); - writeb(1, &bs->idata); - spin_unlock_irqrestore(&ch->ch_lock, lock_flags2); - spin_unlock_irqrestore(&bd->bd_lock, lock_flags); - return; - } - - /* - * If we are throttled, simply don't read any data. - */ - if (ch->ch_flags & CH_RXBLOCK) { - writeb(1, &bs->idata); - spin_unlock_irqrestore(&ch->ch_lock, lock_flags2); - spin_unlock_irqrestore(&bd->bd_lock, lock_flags); - return; - } - - /* - * Ignore oruns. - */ - tmpchar = readb(&bs->orun); - if (tmpchar) { - ch->ch_err_overrun++; - writeb(0, &bs->orun); - } - - /* Decide how much data we can send into the tty layer */ - flip_len = TTY_FLIPBUF_SIZE; - - /* Chop down the length, if needed */ - len = min(data_len, flip_len); - len = min(len, (N_TTY_BUF_SIZE - 1)); - - ld = tty_ldisc_ref(tp); - -#ifdef TTY_DONT_FLIP - /* - * If the DONT_FLIP flag is on, don't flush our buffer, and act - * like the ld doesn't have any space to put the data right now. - */ - if (test_bit(TTY_DONT_FLIP, &tp->flags)) - len = 0; -#endif - - /* - * If we were unable to get a reference to the ld, - * don't flush our buffer, and act like the ld doesn't - * have any space to put the data right now. - */ - if (!ld) { - len = 0; - } else { - /* - * If ld doesn't have a pointer to a receive_buf function, - * flush the data, then act like the ld doesn't have any - * space to put the data right now. - */ - if (!ld->ops->receive_buf) { - writew(head, &bs->rx_tail); - len = 0; - } - } - - if (len <= 0) { - writeb(1, &bs->idata); - spin_unlock_irqrestore(&ch->ch_lock, lock_flags2); - spin_unlock_irqrestore(&bd->bd_lock, lock_flags); - if (ld) - tty_ldisc_deref(ld); - return; - } - - buf = ch->ch_bd->flipbuf; - n = len; - - /* - * n now contains the most amount of data we can copy, - * bounded either by our buffer size or the amount - * of data the card actually has pending... - */ - while (n) { - s = ((head >= tail) ? head : ch->ch_rsize) - tail; - s = min(s, n); - - if (s <= 0) - break; - - memcpy_fromio(buf, ch->ch_raddr + tail, s); - - tail += s; - buf += s; - - n -= s; - /* Flip queue if needed */ - tail &= rmask; - } - - writew(tail, &bs->rx_tail); - writeb(1, &bs->idata); - ch->ch_rxcount += len; - - /* - * If we are completely raw, we don't need to go through a lot - * of the tty layers that exist. - * In this case, we take the shortest and fastest route we - * can to relay the data to the user. - * - * On the other hand, if we are not raw, we need to go through - * the tty layer, which has its API more well defined. - */ - if (I_PARMRK(tp) || I_BRKINT(tp) || I_INPCK(tp)) { - dgap_parity_scan(ch, ch->ch_bd->flipbuf, - ch->ch_bd->flipflagbuf, &len); - - len = tty_buffer_request_room(tp->port, len); - tty_insert_flip_string_flags(tp->port, ch->ch_bd->flipbuf, - ch->ch_bd->flipflagbuf, len); - } else { - len = tty_buffer_request_room(tp->port, len); - tty_insert_flip_string(tp->port, ch->ch_bd->flipbuf, len); - } - - spin_unlock_irqrestore(&ch->ch_lock, lock_flags2); - spin_unlock_irqrestore(&bd->bd_lock, lock_flags); - - /* Tell the tty layer its okay to "eat" the data now */ - tty_flip_buffer_push(tp->port); - - if (ld) - tty_ldisc_deref(ld); -} - -static void dgap_write_wakeup(struct board_t *bd, struct channel_t *ch, - struct un_t *un, u32 mask, - unsigned long *irq_flags1, - unsigned long *irq_flags2) -{ - if (!(un->un_flags & mask)) - return; - - un->un_flags &= ~mask; - - if (!(un->un_flags & UN_ISOPEN)) - return; - - if ((un->un_tty->flags & (1 << TTY_DO_WRITE_WAKEUP)) && - un->un_tty->ldisc->ops->write_wakeup) { - spin_unlock_irqrestore(&ch->ch_lock, *irq_flags2); - spin_unlock_irqrestore(&bd->bd_lock, *irq_flags1); - - (un->un_tty->ldisc->ops->write_wakeup)(un->un_tty); - - spin_lock_irqsave(&bd->bd_lock, *irq_flags1); - spin_lock_irqsave(&ch->ch_lock, *irq_flags2); - } - wake_up_interruptible(&un->un_tty->write_wait); - wake_up_interruptible(&un->un_flags_wait); -} - -/************************************************************************ - * Determines when CARRIER changes state and takes appropriate - * action. - ************************************************************************/ -static void dgap_carrier(struct channel_t *ch) -{ - struct board_t *bd; - - int virt_carrier = 0; - int phys_carrier = 0; - - if (!ch || ch->magic != DGAP_CHANNEL_MAGIC) - return; - - bd = ch->ch_bd; - - if (!bd || bd->magic != DGAP_BOARD_MAGIC) - return; - - /* Make sure altpin is always set correctly */ - if (ch->ch_digi.digi_flags & DIGI_ALTPIN) { - ch->ch_dsr = DM_CD; - ch->ch_cd = DM_DSR; - } else { - ch->ch_dsr = DM_DSR; - ch->ch_cd = DM_CD; - } - - if (ch->ch_mistat & D_CD(ch)) - phys_carrier = 1; - - if (ch->ch_digi.digi_flags & DIGI_FORCEDCD) - virt_carrier = 1; - - if (ch->ch_c_cflag & CLOCAL) - virt_carrier = 1; - - /* - * Test for a VIRTUAL carrier transition to HIGH. - */ - if (((ch->ch_flags & CH_FCAR) == 0) && (virt_carrier == 1)) { - /* - * When carrier rises, wake any threads waiting - * for carrier in the open routine. - */ - - if (waitqueue_active(&(ch->ch_flags_wait))) - wake_up_interruptible(&ch->ch_flags_wait); - } - - /* - * Test for a PHYSICAL carrier transition to HIGH. - */ - if (((ch->ch_flags & CH_CD) == 0) && (phys_carrier == 1)) { - /* - * When carrier rises, wake any threads waiting - * for carrier in the open routine. - */ - - if (waitqueue_active(&(ch->ch_flags_wait))) - wake_up_interruptible(&ch->ch_flags_wait); - } - - /* - * Test for a PHYSICAL transition to low, so long as we aren't - * currently ignoring physical transitions (which is what "virtual - * carrier" indicates). - * - * The transition of the virtual carrier to low really doesn't - * matter... it really only means "ignore carrier state", not - * "make pretend that carrier is there". - */ - if ((virt_carrier == 0) && - ((ch->ch_flags & CH_CD) != 0) && - (phys_carrier == 0)) { - /* - * When carrier drops: - * - * Drop carrier on all open units. - * - * Flush queues, waking up any task waiting in the - * line discipline. - * - * Send a hangup to the control terminal. - * - * Enable all select calls. - */ - if (waitqueue_active(&(ch->ch_flags_wait))) - wake_up_interruptible(&ch->ch_flags_wait); - - if (ch->ch_tun.un_open_count > 0) - tty_hangup(ch->ch_tun.un_tty); - - if (ch->ch_pun.un_open_count > 0) - tty_hangup(ch->ch_pun.un_tty); - } - - /* - * Make sure that our cached values reflect the current reality. - */ - if (virt_carrier == 1) - ch->ch_flags |= CH_FCAR; - else - ch->ch_flags &= ~CH_FCAR; - - if (phys_carrier == 1) - ch->ch_flags |= CH_CD; - else - ch->ch_flags &= ~CH_CD; -} - -/*======================================================================= - * - * dgap_event - FEP to host event processing routine. - * - * bd - Board of current event. - * - *=======================================================================*/ -static int dgap_event(struct board_t *bd) -{ - struct channel_t *ch; - ulong lock_flags; - ulong lock_flags2; - struct bs_t __iomem *bs; - u8 __iomem *event; - u8 __iomem *vaddr; - struct ev_t __iomem *eaddr; - uint head; - uint tail; - int port; - int reason; - int modem; - - if (!bd || bd->magic != DGAP_BOARD_MAGIC) - return -EIO; - - spin_lock_irqsave(&bd->bd_lock, lock_flags); - - vaddr = bd->re_map_membase; - - if (!vaddr) { - spin_unlock_irqrestore(&bd->bd_lock, lock_flags); - return -EIO; - } - - eaddr = (struct ev_t __iomem *)(vaddr + EVBUF); - - /* Get our head and tail */ - head = readw(&eaddr->ev_head); - tail = readw(&eaddr->ev_tail); - - /* - * Forget it if pointers out of range. - */ - - if (head >= EVMAX - EVSTART || tail >= EVMAX - EVSTART || - (head | tail) & 03) { - /* Let go of board lock */ - spin_unlock_irqrestore(&bd->bd_lock, lock_flags); - return -EIO; - } - - /* - * Loop to process all the events in the buffer. - */ - while (tail != head) { - /* - * Get interrupt information. - */ - - event = bd->re_map_membase + tail + EVSTART; - - port = ioread8(event); - reason = ioread8(event + 1); - modem = ioread8(event + 2); - ioread8(event + 3); - - /* - * Make sure the interrupt is valid. - */ - if (port >= bd->nasync) - goto next; - - if (!(reason & (IFMODEM | IFBREAK | IFTLW | IFTEM | IFDATA))) - goto next; - - ch = bd->channels[port]; - - if (!ch || ch->magic != DGAP_CHANNEL_MAGIC) - goto next; - - /* - * If we have made it here, the event was valid. - * Lock down the channel. - */ - spin_lock_irqsave(&ch->ch_lock, lock_flags2); - - bs = ch->ch_bs; - - if (!bs) { - spin_unlock_irqrestore(&ch->ch_lock, lock_flags2); - goto next; - } - - /* - * Process received data. - */ - if (reason & IFDATA) { - /* - * ALL LOCKS *MUST* BE DROPPED BEFORE CALLING INPUT! - * input could send some data to ld, which in turn - * could do a callback to one of our other functions. - */ - spin_unlock_irqrestore(&ch->ch_lock, lock_flags2); - spin_unlock_irqrestore(&bd->bd_lock, lock_flags); - - dgap_input(ch); - - spin_lock_irqsave(&bd->bd_lock, lock_flags); - spin_lock_irqsave(&ch->ch_lock, lock_flags2); - - if (ch->ch_flags & CH_RACTIVE) - ch->ch_flags |= CH_RENABLE; - else - writeb(1, &bs->idata); - - if (ch->ch_flags & CH_RWAIT) { - ch->ch_flags &= ~CH_RWAIT; - - wake_up_interruptible - (&ch->ch_tun.un_flags_wait); - } - } - - /* - * Process Modem change signals. - */ - if (reason & IFMODEM) { - ch->ch_mistat = modem; - dgap_carrier(ch); - } - - /* - * Process break. - */ - if (reason & IFBREAK) { - if (ch->ch_tun.un_tty) { - /* A break has been indicated */ - ch->ch_err_break++; - tty_buffer_request_room - (ch->ch_tun.un_tty->port, 1); - tty_insert_flip_char(ch->ch_tun.un_tty->port, - 0, TTY_BREAK); - tty_flip_buffer_push(ch->ch_tun.un_tty->port); - } - } - - /* - * Process Transmit low. - */ - if (reason & IFTLW) { - dgap_write_wakeup(bd, ch, &ch->ch_tun, UN_LOW, - &lock_flags, &lock_flags2); - dgap_write_wakeup(bd, ch, &ch->ch_pun, UN_LOW, - &lock_flags, &lock_flags2); - if (ch->ch_flags & CH_WLOW) { - ch->ch_flags &= ~CH_WLOW; - wake_up_interruptible(&ch->ch_flags_wait); - } - } - - /* - * Process Transmit empty. - */ - if (reason & IFTEM) { - dgap_write_wakeup(bd, ch, &ch->ch_tun, UN_EMPTY, - &lock_flags, &lock_flags2); - dgap_write_wakeup(bd, ch, &ch->ch_pun, UN_EMPTY, - &lock_flags, &lock_flags2); - if (ch->ch_flags & CH_WEMPTY) { - ch->ch_flags &= ~CH_WEMPTY; - wake_up_interruptible(&ch->ch_flags_wait); - } - } - - spin_unlock_irqrestore(&ch->ch_lock, lock_flags2); - -next: - tail = (tail + 4) & (EVMAX - EVSTART - 4); - } - - writew(tail, &eaddr->ev_tail); - spin_unlock_irqrestore(&bd->bd_lock, lock_flags); - - return 0; -} - -/* - * Our board poller function. - */ -static void dgap_poll_tasklet(unsigned long data) -{ - struct board_t *bd = (struct board_t *)data; - ulong lock_flags; - char __iomem *vaddr; - u16 head, tail; - - if (!bd || (bd->magic != DGAP_BOARD_MAGIC)) - return; - - if (bd->inhibit_poller) - return; - - spin_lock_irqsave(&bd->bd_lock, lock_flags); - - vaddr = bd->re_map_membase; - - /* - * If board is ready, parse deeper to see if there is anything to do. - */ - if (bd->state == BOARD_READY) { - struct ev_t __iomem *eaddr; - - if (!bd->re_map_membase) { - spin_unlock_irqrestore(&bd->bd_lock, lock_flags); - return; - } - if (!bd->re_map_port) { - spin_unlock_irqrestore(&bd->bd_lock, lock_flags); - return; - } - - if (!bd->nasync) - goto out; - - eaddr = (struct ev_t __iomem *)(vaddr + EVBUF); - - /* Get our head and tail */ - head = readw(&eaddr->ev_head); - tail = readw(&eaddr->ev_tail); - - /* - * If there is an event pending. Go service it. - */ - if (head != tail) { - spin_unlock_irqrestore(&bd->bd_lock, lock_flags); - dgap_event(bd); - spin_lock_irqsave(&bd->bd_lock, lock_flags); - } - -out: - /* - * If board is doing interrupts, ACK the interrupt. - */ - if (bd->intr_running) - readb(bd->re_map_port + 2); - - spin_unlock_irqrestore(&bd->bd_lock, lock_flags); - return; - } - - spin_unlock_irqrestore(&bd->bd_lock, lock_flags); -} - -/* - * dgap_found_board() - * - * A board has been found, init it. - */ -static struct board_t *dgap_found_board(struct pci_dev *pdev, int id, - int boardnum) -{ - struct board_t *brd; - unsigned int pci_irq; - int i; - int ret; - - /* get the board structure and prep it */ - brd = kzalloc(sizeof(struct board_t), GFP_KERNEL); - if (!brd) - return ERR_PTR(-ENOMEM); - - /* store the info for the board we've found */ - brd->magic = DGAP_BOARD_MAGIC; - brd->boardnum = boardnum; - brd->vendor = dgap_pci_tbl[id].vendor; - brd->device = dgap_pci_tbl[id].device; - brd->pdev = pdev; - brd->pci_bus = pdev->bus->number; - brd->pci_slot = PCI_SLOT(pdev->devfn); - brd->name = dgap_ids[id].name; - brd->maxports = dgap_ids[id].maxports; - brd->type = dgap_ids[id].config_type; - brd->dpatype = dgap_ids[id].dpatype; - brd->dpastatus = BD_NOFEP; - init_waitqueue_head(&brd->state_wait); - - spin_lock_init(&brd->bd_lock); - - brd->inhibit_poller = FALSE; - brd->wait_for_bios = 0; - brd->wait_for_fep = 0; - - for (i = 0; i < MAXPORTS; i++) - brd->channels[i] = NULL; - - /* store which card & revision we have */ - pci_read_config_word(pdev, PCI_SUBSYSTEM_VENDOR_ID, &brd->subvendor); - pci_read_config_word(pdev, PCI_SUBSYSTEM_ID, &brd->subdevice); - pci_read_config_byte(pdev, PCI_REVISION_ID, &brd->rev); - - pci_irq = pdev->irq; - brd->irq = pci_irq; - - /* get the PCI Base Address Registers */ - - /* Xr Jupiter and EPC use BAR 2 */ - if (brd->device == PCI_DEV_XRJ_DID || brd->device == PCI_DEV_EPCJ_DID) { - brd->membase = pci_resource_start(pdev, 2); - brd->membase_end = pci_resource_end(pdev, 2); - } - /* Everyone else uses BAR 0 */ - else { - brd->membase = pci_resource_start(pdev, 0); - brd->membase_end = pci_resource_end(pdev, 0); - } - - if (!brd->membase) { - ret = -ENODEV; - goto free_brd; - } - - if (brd->membase & 1) - brd->membase &= ~3; - else - brd->membase &= ~15; - - /* - * On the PCI boards, there is no IO space allocated - * The I/O registers will be in the first 3 bytes of the - * upper 2MB of the 4MB memory space. The board memory - * will be mapped into the low 2MB of the 4MB memory space - */ - brd->port = brd->membase + PCI_IO_OFFSET; - brd->port_end = brd->port + PCI_IO_SIZE_DGAP; - - /* - * Special initialization for non-PLX boards - */ - if (brd->device != PCI_DEV_XRJ_DID && brd->device != PCI_DEV_EPCJ_DID) { - unsigned short cmd; - - pci_write_config_byte(pdev, 0x40, 0); - pci_write_config_byte(pdev, 0x46, 0); - - /* Limit burst length to 2 doubleword transactions */ - pci_write_config_byte(pdev, 0x42, 1); - - /* - * Enable IO and mem if not already done. - * This was needed for support on Itanium. - */ - pci_read_config_word(pdev, PCI_COMMAND, &cmd); - cmd |= (PCI_COMMAND_IO | PCI_COMMAND_MEMORY); - pci_write_config_word(pdev, PCI_COMMAND, cmd); - } - - /* init our poll helper tasklet */ - tasklet_init(&brd->helper_tasklet, dgap_poll_tasklet, - (unsigned long)brd); - - ret = dgap_remap(brd); - if (ret) - goto free_brd; - - pr_info("dgap: board %d: %s (rev %d), irq %ld\n", - boardnum, brd->name, brd->rev, brd->irq); - - return brd; - -free_brd: - kfree(brd); - - return ERR_PTR(ret); -} - -/* - * dgap_intr() - * - * Driver interrupt handler. - */ -static irqreturn_t dgap_intr(int irq, void *voidbrd) -{ - struct board_t *brd = voidbrd; - - if (!brd) - return IRQ_NONE; - - /* - * Check to make sure its for us. - */ - if (brd->magic != DGAP_BOARD_MAGIC) - return IRQ_NONE; - - brd->intr_count++; - - /* - * Schedule tasklet to run at a better time. - */ - tasklet_schedule(&brd->helper_tasklet); - return IRQ_HANDLED; -} - -/***************************************************************************** -* -* Function: -* -* dgap_poll_handler -* -* Author: -* -* Scott H Kilau -* -* Parameters: -* -* dummy -- ignored -* -* Return Values: -* -* none -* -* Description: -* -* As each timer expires, it determines (a) whether the "transmit" -* waiter needs to be woken up, and (b) whether the poller needs to -* be rescheduled. -* -******************************************************************************/ - -static void dgap_poll_handler(ulong dummy) -{ - unsigned int i; - struct board_t *brd; - unsigned long lock_flags; - ulong new_time; - - dgap_poll_counter++; - - /* - * Do not start the board state machine until - * driver tells us its up and running, and has - * everything it needs. - */ - if (dgap_driver_state != DRIVER_READY) - goto schedule_poller; - - /* - * If we have just 1 board, or the system is not SMP, - * then use the typical old style poller. - * Otherwise, use our new tasklet based poller, which should - * speed things up for multiple boards. - */ - if ((dgap_numboards == 1) || (num_online_cpus() <= 1)) { - for (i = 0; i < dgap_numboards; i++) { - brd = dgap_board[i]; - - if (brd->state == BOARD_FAILED) - continue; - if (!brd->intr_running) - /* Call the real board poller directly */ - dgap_poll_tasklet((unsigned long)brd); - } - } else { - /* - * Go thru each board, kicking off a - * tasklet for each if needed - */ - for (i = 0; i < dgap_numboards; i++) { - brd = dgap_board[i]; - - /* - * Attempt to grab the board lock. - * - * If we can't get it, no big deal, the next poll - * will get it. Basically, I just really don't want - * to spin in here, because I want to kick off my - * tasklets as fast as I can, and then get out the - * poller. - */ - if (!spin_trylock(&brd->bd_lock)) - continue; - - /* - * If board is in a failed state, don't bother - * scheduling a tasklet - */ - if (brd->state == BOARD_FAILED) { - spin_unlock(&brd->bd_lock); - continue; - } - - /* Schedule a poll helper task */ - if (!brd->intr_running) - tasklet_schedule(&brd->helper_tasklet); - - /* - * Can't do DGAP_UNLOCK here, as we don't have - * lock_flags because we did a trylock above. - */ - spin_unlock(&brd->bd_lock); - } - } - -schedule_poller: - - /* - * Schedule ourself back at the nominal wakeup interval. - */ - spin_lock_irqsave(&dgap_poll_lock, lock_flags); - dgap_poll_time += dgap_jiffies_from_ms(dgap_poll_tick); - - new_time = dgap_poll_time - jiffies; - - if ((ulong)new_time >= 2 * dgap_poll_tick) { - dgap_poll_time = - jiffies + dgap_jiffies_from_ms(dgap_poll_tick); - } - - dgap_poll_timer.function = dgap_poll_handler; - dgap_poll_timer.data = 0; - dgap_poll_timer.expires = dgap_poll_time; - spin_unlock_irqrestore(&dgap_poll_lock, lock_flags); - - if (!dgap_poll_stop) - add_timer(&dgap_poll_timer); -} - -/*======================================================================= - * - * dgap_cmdb - Sends a 2 byte command to the FEP. - * - * ch - Pointer to channel structure. - * cmd - Command to be sent. - * byte1 - Integer containing first byte to be sent. - * byte2 - Integer containing second byte to be sent. - * ncmds - Wait until ncmds or fewer cmds are left - * in the cmd buffer before returning. - * - *=======================================================================*/ -static void dgap_cmdb(struct channel_t *ch, u8 cmd, u8 byte1, - u8 byte2, uint ncmds) -{ - char __iomem *vaddr; - struct __iomem cm_t *cm_addr; - uint count; - uint n; - u16 head; - u16 tail; - - if (!ch || ch->magic != DGAP_CHANNEL_MAGIC) - return; - - /* - * Check if board is still alive. - */ - if (ch->ch_bd->state == BOARD_FAILED) - return; - - /* - * Make sure the pointers are in range before - * writing to the FEP memory. - */ - vaddr = ch->ch_bd->re_map_membase; - - if (!vaddr) - return; - - cm_addr = (struct cm_t __iomem *)(vaddr + CMDBUF); - head = readw(&cm_addr->cm_head); - - /* - * Forget it if pointers out of range. - */ - if (head >= (CMDMAX - CMDSTART) || (head & 03)) { - ch->ch_bd->state = BOARD_FAILED; - return; - } - - /* - * Put the data in the circular command buffer. - */ - writeb(cmd, (vaddr + head + CMDSTART + 0)); - writeb((u8)ch->ch_portnum, (vaddr + head + CMDSTART + 1)); - writeb(byte1, (vaddr + head + CMDSTART + 2)); - writeb(byte2, (vaddr + head + CMDSTART + 3)); - - head = (head + 4) & (CMDMAX - CMDSTART - 4); - - writew(head, &cm_addr->cm_head); - - /* - * Wait if necessary before updating the head - * pointer to limit the number of outstanding - * commands to the FEP. If the time spent waiting - * is outlandish, declare the FEP dead. - */ - for (count = dgap_count ;;) { - head = readw(&cm_addr->cm_head); - tail = readw(&cm_addr->cm_tail); - - n = (head - tail) & (CMDMAX - CMDSTART - 4); - - if (n <= ncmds * sizeof(struct cm_t)) - break; - - if (--count == 0) { - ch->ch_bd->state = BOARD_FAILED; - return; - } - udelay(10); - } -} - -/*======================================================================= - * - * dgap_cmdw - Sends a 1 word command to the FEP. - * - * ch - Pointer to channel structure. - * cmd - Command to be sent. - * word - Integer containing word to be sent. - * ncmds - Wait until ncmds or fewer cmds are left - * in the cmd buffer before returning. - * - *=======================================================================*/ -static void dgap_cmdw(struct channel_t *ch, u8 cmd, u16 word, uint ncmds) -{ - char __iomem *vaddr; - struct __iomem cm_t *cm_addr; - uint count; - uint n; - u16 head; - u16 tail; - - if (!ch || ch->magic != DGAP_CHANNEL_MAGIC) - return; - - /* - * Check if board is still alive. - */ - if (ch->ch_bd->state == BOARD_FAILED) - return; - - /* - * Make sure the pointers are in range before - * writing to the FEP memory. - */ - vaddr = ch->ch_bd->re_map_membase; - if (!vaddr) - return; - - cm_addr = (struct cm_t __iomem *)(vaddr + CMDBUF); - head = readw(&cm_addr->cm_head); - - /* - * Forget it if pointers out of range. - */ - if (head >= (CMDMAX - CMDSTART) || (head & 03)) { - ch->ch_bd->state = BOARD_FAILED; - return; - } - - /* - * Put the data in the circular command buffer. - */ - writeb(cmd, (vaddr + head + CMDSTART + 0)); - writeb((u8)ch->ch_portnum, (vaddr + head + CMDSTART + 1)); - writew((u16)word, (vaddr + head + CMDSTART + 2)); - - head = (head + 4) & (CMDMAX - CMDSTART - 4); - - writew(head, &cm_addr->cm_head); - - /* - * Wait if necessary before updating the head - * pointer to limit the number of outstanding - * commands to the FEP. If the time spent waiting - * is outlandish, declare the FEP dead. - */ - for (count = dgap_count ;;) { - head = readw(&cm_addr->cm_head); - tail = readw(&cm_addr->cm_tail); - - n = (head - tail) & (CMDMAX - CMDSTART - 4); - - if (n <= ncmds * sizeof(struct cm_t)) - break; - - if (--count == 0) { - ch->ch_bd->state = BOARD_FAILED; - return; - } - udelay(10); - } -} - -/*======================================================================= - * - * dgap_cmdw_ext - Sends a extended word command to the FEP. - * - * ch - Pointer to channel structure. - * cmd - Command to be sent. - * word - Integer containing word to be sent. - * ncmds - Wait until ncmds or fewer cmds are left - * in the cmd buffer before returning. - * - *=======================================================================*/ -static void dgap_cmdw_ext(struct channel_t *ch, u16 cmd, u16 word, uint ncmds) -{ - char __iomem *vaddr; - struct __iomem cm_t *cm_addr; - uint count; - uint n; - u16 head; - u16 tail; - - if (!ch || ch->magic != DGAP_CHANNEL_MAGIC) - return; - - /* - * Check if board is still alive. - */ - if (ch->ch_bd->state == BOARD_FAILED) - return; - - /* - * Make sure the pointers are in range before - * writing to the FEP memory. - */ - vaddr = ch->ch_bd->re_map_membase; - if (!vaddr) - return; - - cm_addr = (struct cm_t __iomem *)(vaddr + CMDBUF); - head = readw(&cm_addr->cm_head); - - /* - * Forget it if pointers out of range. - */ - if (head >= (CMDMAX - CMDSTART) || (head & 03)) { - ch->ch_bd->state = BOARD_FAILED; - return; - } - - /* - * Put the data in the circular command buffer. - */ - - /* Write an FF to tell the FEP that we want an extended command */ - writeb((u8)0xff, (vaddr + head + CMDSTART + 0)); - - writeb((u8)ch->ch_portnum, (vaddr + head + CMDSTART + 1)); - writew((u16)cmd, (vaddr + head + CMDSTART + 2)); - - /* - * If the second part of the command won't fit, - * put it at the beginning of the circular buffer. - */ - if (((head + 4) >= ((CMDMAX - CMDSTART)) || (head & 03))) - writew((u16)word, (vaddr + CMDSTART)); - else - writew((u16)word, (vaddr + head + CMDSTART + 4)); - - head = (head + 8) & (CMDMAX - CMDSTART - 4); - - writew(head, &cm_addr->cm_head); - - /* - * Wait if necessary before updating the head - * pointer to limit the number of outstanding - * commands to the FEP. If the time spent waiting - * is outlandish, declare the FEP dead. - */ - for (count = dgap_count ;;) { - head = readw(&cm_addr->cm_head); - tail = readw(&cm_addr->cm_tail); - - n = (head - tail) & (CMDMAX - CMDSTART - 4); - - if (n <= ncmds * sizeof(struct cm_t)) - break; - - if (--count == 0) { - ch->ch_bd->state = BOARD_FAILED; - return; - } - udelay(10); - } -} - -/*======================================================================= - * - * dgap_wmove - Write data to FEP buffer. - * - * ch - Pointer to channel structure. - * buf - Pointer to characters to be moved. - * cnt - Number of characters to move. - * - *=======================================================================*/ -static void dgap_wmove(struct channel_t *ch, char *buf, uint cnt) -{ - int n; - char __iomem *taddr; - struct bs_t __iomem *bs; - u16 head; - - if (!ch || ch->magic != DGAP_CHANNEL_MAGIC) - return; - - /* - * Check parameters. - */ - bs = ch->ch_bs; - head = readw(&bs->tx_head); - - /* - * If pointers are out of range, just return. - */ - if ((cnt > ch->ch_tsize) || - (unsigned)(head - ch->ch_tstart) >= ch->ch_tsize) - return; - - /* - * If the write wraps over the top of the circular buffer, - * move the portion up to the wrap point, and reset the - * pointers to the bottom. - */ - n = ch->ch_tstart + ch->ch_tsize - head; - - if (cnt >= n) { - cnt -= n; - taddr = ch->ch_taddr + head; - memcpy_toio(taddr, buf, n); - head = ch->ch_tstart; - buf += n; - } - - /* - * Move rest of data. - */ - taddr = ch->ch_taddr + head; - n = cnt; - memcpy_toio(taddr, buf, n); - head += cnt; - - writew(head, &bs->tx_head); -} - -/* - * Calls the firmware to reset this channel. - */ -static void dgap_firmware_reset_port(struct channel_t *ch) -{ - dgap_cmdb(ch, CHRESET, 0, 0, 0); - - /* - * Now that the channel is reset, we need to make sure - * all the current settings get reapplied to the port - * in the firmware. - * - * So we will set the driver's cache of firmware - * settings all to 0, and then call param. - */ - ch->ch_fepiflag = 0; - ch->ch_fepcflag = 0; - ch->ch_fepoflag = 0; - ch->ch_fepstartc = 0; - ch->ch_fepstopc = 0; - ch->ch_fepastartc = 0; - ch->ch_fepastopc = 0; - ch->ch_mostat = 0; - ch->ch_hflow = 0; -} - -/*======================================================================= - * - * dgap_param - Set Digi parameters. - * - * struct tty_struct * - TTY for port. - * - *=======================================================================*/ -static int dgap_param(struct channel_t *ch, struct board_t *bd, u32 un_type) -{ - u16 head; - u16 cflag; - u16 iflag; - u8 mval; - u8 hflow; - - /* - * If baud rate is zero, flush queues, and set mval to drop DTR. - */ - if ((ch->ch_c_cflag & (CBAUD)) == 0) { - /* flush rx */ - head = readw(&ch->ch_bs->rx_head); - writew(head, &ch->ch_bs->rx_tail); - - /* flush tx */ - head = readw(&ch->ch_bs->tx_head); - writew(head, &ch->ch_bs->tx_tail); - - ch->ch_flags |= (CH_BAUD0); - - /* Drop RTS and DTR */ - ch->ch_mval &= ~(D_RTS(ch) | D_DTR(ch)); - mval = D_DTR(ch) | D_RTS(ch); - ch->ch_baud_info = 0; - - } else if (ch->ch_custom_speed && (bd->bd_flags & BD_FEP5PLUS)) { - /* - * Tell the fep to do the command - */ - - dgap_cmdw_ext(ch, 0xff01, ch->ch_custom_speed, 0); - - /* - * Now go get from fep mem, what the fep - * believes the custom baud rate is. - */ - ch->ch_custom_speed = dgap_get_custom_baud(ch); - ch->ch_baud_info = ch->ch_custom_speed; - - /* Handle transition from B0 */ - if (ch->ch_flags & CH_BAUD0) { - ch->ch_flags &= ~(CH_BAUD0); - ch->ch_mval |= (D_RTS(ch) | D_DTR(ch)); - } - mval = D_DTR(ch) | D_RTS(ch); - - } else { - /* - * Set baud rate, character size, and parity. - */ - - - int iindex = 0; - int jindex = 0; - int baud = 0; - - ulong bauds[4][16] = { - { /* slowbaud */ - 0, 50, 75, 110, - 134, 150, 200, 300, - 600, 1200, 1800, 2400, - 4800, 9600, 19200, 38400 }, - { /* slowbaud & CBAUDEX */ - 0, 57600, 115200, 230400, - 460800, 150, 200, 921600, - 600, 1200, 1800, 2400, - 4800, 9600, 19200, 38400 }, - { /* fastbaud */ - 0, 57600, 76800, 115200, - 14400, 57600, 230400, 76800, - 115200, 230400, 28800, 460800, - 921600, 9600, 19200, 38400 }, - { /* fastbaud & CBAUDEX */ - 0, 57600, 115200, 230400, - 460800, 150, 200, 921600, - 600, 1200, 1800, 2400, - 4800, 9600, 19200, 38400 } - }; - - /* - * Only use the TXPrint baud rate if the - * terminal unit is NOT open - */ - if (!(ch->ch_tun.un_flags & UN_ISOPEN) && - un_type == DGAP_PRINT) - baud = C_BAUD(ch->ch_pun.un_tty) & 0xff; - else - baud = C_BAUD(ch->ch_tun.un_tty) & 0xff; - - if (ch->ch_c_cflag & CBAUDEX) - iindex = 1; - - if (ch->ch_digi.digi_flags & DIGI_FAST) - iindex += 2; - - jindex = baud; - - if ((iindex >= 0) && (iindex < 4) && - (jindex >= 0) && (jindex < 16)) - baud = bauds[iindex][jindex]; - else - baud = 0; - - if (baud == 0) - baud = 9600; - - ch->ch_baud_info = baud; - - /* - * CBAUD has bit position 0x1000 set these days to - * indicate Linux baud rate remap. - * We use a different bit assignment for high speed. - * Clear this bit out while grabbing the parts of - * "cflag" we want. - */ - cflag = ch->ch_c_cflag & ((CBAUD ^ CBAUDEX) | PARODD | PARENB | - CSTOPB | CSIZE); - - /* - * HUPCL bit is used by FEP to indicate fast baud - * table is to be used. - */ - if ((ch->ch_digi.digi_flags & DIGI_FAST) || - (ch->ch_c_cflag & CBAUDEX)) - cflag |= HUPCL; - - if ((ch->ch_c_cflag & CBAUDEX) && - !(ch->ch_digi.digi_flags & DIGI_FAST)) { - /* - * The below code is trying to guarantee that only - * baud rates 115200, 230400, 460800, 921600 are - * remapped. We use exclusive or because the various - * baud rates share common bit positions and therefore - * can't be tested for easily. - */ - tcflag_t tcflag = (ch->ch_c_cflag & CBAUD) | CBAUDEX; - int baudpart = 0; - - /* - * Map high speed requests to index - * into FEP's baud table - */ - switch (tcflag) { - case B57600: - baudpart = 1; - break; -#ifdef B76800 - case B76800: - baudpart = 2; - break; -#endif - case B115200: - baudpart = 3; - break; - case B230400: - baudpart = 9; - break; - case B460800: - baudpart = 11; - break; -#ifdef B921600 - case B921600: - baudpart = 12; - break; -#endif - default: - baudpart = 0; - } - - if (baudpart) - cflag = (cflag & ~(CBAUD | CBAUDEX)) | baudpart; - } - - cflag &= 0xffff; - - if (cflag != ch->ch_fepcflag) { - ch->ch_fepcflag = (u16)(cflag & 0xffff); - - /* - * Okay to have channel and board - * locks held calling this - */ - dgap_cmdw(ch, SCFLAG, (u16)cflag, 0); - } - - /* Handle transition from B0 */ - if (ch->ch_flags & CH_BAUD0) { - ch->ch_flags &= ~(CH_BAUD0); - ch->ch_mval |= (D_RTS(ch) | D_DTR(ch)); - } - mval = D_DTR(ch) | D_RTS(ch); - } - - /* - * Get input flags. - */ - iflag = ch->ch_c_iflag & (IGNBRK | BRKINT | IGNPAR | PARMRK | - INPCK | ISTRIP | IXON | IXANY | IXOFF); - - if ((ch->ch_startc == _POSIX_VDISABLE) || - (ch->ch_stopc == _POSIX_VDISABLE)) { - iflag &= ~(IXON | IXOFF); - ch->ch_c_iflag &= ~(IXON | IXOFF); - } - - /* - * Only the IBM Xr card can switch between - * 232 and 422 modes on the fly - */ - if (bd->device == PCI_DEV_XR_IBM_DID) { - if (ch->ch_digi.digi_flags & DIGI_422) - dgap_cmdb(ch, SCOMMODE, MODE_422, 0, 0); - else - dgap_cmdb(ch, SCOMMODE, MODE_232, 0, 0); - } - - if (ch->ch_digi.digi_flags & DIGI_ALTPIN) - iflag |= IALTPIN; - - if (iflag != ch->ch_fepiflag) { - ch->ch_fepiflag = iflag; - - /* Okay to have channel and board locks held calling this */ - dgap_cmdw(ch, SIFLAG, (u16)ch->ch_fepiflag, 0); - } - - /* - * Select hardware handshaking. - */ - hflow = 0; - - if (ch->ch_c_cflag & CRTSCTS) - hflow |= (D_RTS(ch) | D_CTS(ch)); - if (ch->ch_digi.digi_flags & RTSPACE) - hflow |= D_RTS(ch); - if (ch->ch_digi.digi_flags & DTRPACE) - hflow |= D_DTR(ch); - if (ch->ch_digi.digi_flags & CTSPACE) - hflow |= D_CTS(ch); - if (ch->ch_digi.digi_flags & DSRPACE) - hflow |= D_DSR(ch); - if (ch->ch_digi.digi_flags & DCDPACE) - hflow |= D_CD(ch); - - if (hflow != ch->ch_hflow) { - ch->ch_hflow = hflow; - - /* Okay to have channel and board locks held calling this */ - dgap_cmdb(ch, SHFLOW, (u8)hflow, 0xff, 0); - } - - /* - * Set RTS and/or DTR Toggle if needed, - * but only if product is FEP5+ based. - */ - if (bd->bd_flags & BD_FEP5PLUS) { - u16 hflow2 = 0; - - if (ch->ch_digi.digi_flags & DIGI_RTS_TOGGLE) - hflow2 |= (D_RTS(ch)); - if (ch->ch_digi.digi_flags & DIGI_DTR_TOGGLE) - hflow2 |= (D_DTR(ch)); - - dgap_cmdw_ext(ch, 0xff03, hflow2, 0); - } - - /* - * Set modem control lines. - */ - - mval ^= ch->ch_mforce & (mval ^ ch->ch_mval); - - if (ch->ch_mostat ^ mval) { - ch->ch_mostat = mval; - - /* Okay to have channel and board locks held calling this */ - dgap_cmdb(ch, SMODEM, (u8)mval, D_RTS(ch) | D_DTR(ch), 0); - } - - /* - * Read modem signals, and then call carrier function. - */ - ch->ch_mistat = readb(&ch->ch_bs->m_stat); - dgap_carrier(ch); - - /* - * Set the start and stop characters. - */ - if (ch->ch_startc != ch->ch_fepstartc || - ch->ch_stopc != ch->ch_fepstopc) { - ch->ch_fepstartc = ch->ch_startc; - ch->ch_fepstopc = ch->ch_stopc; - - /* Okay to have channel and board locks held calling this */ - dgap_cmdb(ch, SFLOWC, ch->ch_fepstartc, ch->ch_fepstopc, 0); - } - - /* - * Set the Auxiliary start and stop characters. - */ - if (ch->ch_astartc != ch->ch_fepastartc || - ch->ch_astopc != ch->ch_fepastopc) { - ch->ch_fepastartc = ch->ch_astartc; - ch->ch_fepastopc = ch->ch_astopc; - - /* Okay to have channel and board locks held calling this */ - dgap_cmdb(ch, SAFLOWC, ch->ch_fepastartc, ch->ch_fepastopc, 0); - } - - return 0; -} - -/* - * dgap_block_til_ready() - * - * Wait for DCD, if needed. - */ -static int dgap_block_til_ready(struct tty_struct *tty, struct file *file, - struct channel_t *ch) -{ - int retval = 0; - struct un_t *un; - ulong lock_flags; - uint old_flags; - int sleep_on_un_flags; - - if (!tty || tty->magic != TTY_MAGIC || !file || !ch || - ch->magic != DGAP_CHANNEL_MAGIC) - return -EIO; - - un = tty->driver_data; - if (!un || un->magic != DGAP_UNIT_MAGIC) - return -EIO; - - spin_lock_irqsave(&ch->ch_lock, lock_flags); - - ch->ch_wopen++; - - /* Loop forever */ - while (1) { - sleep_on_un_flags = 0; - - /* - * If board has failed somehow during our sleep, - * bail with error. - */ - if (ch->ch_bd->state == BOARD_FAILED) { - retval = -EIO; - break; - } - - /* If tty was hung up, break out of loop and set error. */ - if (tty_hung_up_p(file)) { - retval = -EAGAIN; - break; - } - - /* - * If either unit is in the middle of the fragile part of close, - * we just cannot touch the channel safely. - * Go back to sleep, knowing that when the channel can be - * touched safely, the close routine will signal the - * ch_wait_flags to wake us back up. - */ - if (!((ch->ch_tun.un_flags | ch->ch_pun.un_flags) & - UN_CLOSING)) { - /* - * Our conditions to leave cleanly and happily: - * 1) NONBLOCKING on the tty is set. - * 2) CLOCAL is set. - * 3) DCD (fake or real) is active. - */ - - if (file->f_flags & O_NONBLOCK) - break; - - if (tty->flags & (1 << TTY_IO_ERROR)) - break; - - if (ch->ch_flags & CH_CD) - break; - - if (ch->ch_flags & CH_FCAR) - break; - } else { - sleep_on_un_flags = 1; - } - - /* - * If there is a signal pending, the user probably - * interrupted (ctrl-c) us. - * Leave loop with error set. - */ - if (signal_pending(current)) { - retval = -ERESTARTSYS; - break; - } - - /* - * Store the flags before we let go of channel lock - */ - if (sleep_on_un_flags) - old_flags = ch->ch_tun.un_flags | ch->ch_pun.un_flags; - else - old_flags = ch->ch_flags; - - /* - * Let go of channel lock before calling schedule. - * Our poller will get any FEP events and wake us up when DCD - * eventually goes active. - */ - - spin_unlock_irqrestore(&ch->ch_lock, lock_flags); - - /* - * Wait for something in the flags to change - * from the current value. - */ - if (sleep_on_un_flags) { - retval = wait_event_interruptible(un->un_flags_wait, - (old_flags != (ch->ch_tun.un_flags | - ch->ch_pun.un_flags))); - } else { - retval = wait_event_interruptible(ch->ch_flags_wait, - (old_flags != ch->ch_flags)); - } - - /* - * We got woken up for some reason. - * Before looping around, grab our channel lock. - */ - spin_lock_irqsave(&ch->ch_lock, lock_flags); - } - - ch->ch_wopen--; - - spin_unlock_irqrestore(&ch->ch_lock, lock_flags); - - return retval; -} - -/* - * dgap_tty_flush_buffer() - * - * Flush Tx buffer (make in == out) - */ -static void dgap_tty_flush_buffer(struct tty_struct *tty) -{ - struct board_t *bd; - struct channel_t *ch; - struct un_t *un; - ulong lock_flags; - ulong lock_flags2; - u16 head; - - if (!tty || tty->magic != TTY_MAGIC) - return; - - un = tty->driver_data; - if (!un || un->magic != DGAP_UNIT_MAGIC) - return; - - ch = un->un_ch; - if (!ch || ch->magic != DGAP_CHANNEL_MAGIC) - return; - - bd = ch->ch_bd; - if (!bd || bd->magic != DGAP_BOARD_MAGIC) - return; - - spin_lock_irqsave(&bd->bd_lock, lock_flags); - spin_lock_irqsave(&ch->ch_lock, lock_flags2); - - ch->ch_flags &= ~CH_STOP; - head = readw(&ch->ch_bs->tx_head); - dgap_cmdw(ch, FLUSHTX, (u16)head, 0); - dgap_cmdw(ch, RESUMETX, 0, 0); - if (ch->ch_tun.un_flags & (UN_LOW | UN_EMPTY)) { - ch->ch_tun.un_flags &= ~(UN_LOW | UN_EMPTY); - wake_up_interruptible(&ch->ch_tun.un_flags_wait); - } - if (ch->ch_pun.un_flags & (UN_LOW | UN_EMPTY)) { - ch->ch_pun.un_flags &= ~(UN_LOW | UN_EMPTY); - wake_up_interruptible(&ch->ch_pun.un_flags_wait); - } - - spin_unlock_irqrestore(&ch->ch_lock, lock_flags2); - spin_unlock_irqrestore(&bd->bd_lock, lock_flags); - if (waitqueue_active(&tty->write_wait)) - wake_up_interruptible(&tty->write_wait); - tty_wakeup(tty); -} - -/* - * dgap_tty_hangup() - * - * Hangup the port. Like a close, but don't wait for output to drain. - */ -static void dgap_tty_hangup(struct tty_struct *tty) -{ - struct board_t *bd; - struct channel_t *ch; - struct un_t *un; - - if (!tty || tty->magic != TTY_MAGIC) - return; - - un = tty->driver_data; - if (!un || un->magic != DGAP_UNIT_MAGIC) - return; - - ch = un->un_ch; - if (!ch || ch->magic != DGAP_CHANNEL_MAGIC) - return; - - bd = ch->ch_bd; - if (!bd || bd->magic != DGAP_BOARD_MAGIC) - return; - - /* flush the transmit queues */ - dgap_tty_flush_buffer(tty); -} - -/* - * dgap_tty_chars_in_buffer() - * - * Return number of characters that have not been transmitted yet. - * - * This routine is used by the line discipline to determine if there - * is data waiting to be transmitted/drained/flushed or not. - */ -static int dgap_tty_chars_in_buffer(struct tty_struct *tty) -{ - struct board_t *bd; - struct channel_t *ch; - struct un_t *un; - struct bs_t __iomem *bs; - u8 tbusy; - uint chars; - u16 thead, ttail, tmask, chead, ctail; - ulong lock_flags = 0; - ulong lock_flags2 = 0; - - if (!tty) - return 0; - - un = tty->driver_data; - if (!un || un->magic != DGAP_UNIT_MAGIC) - return 0; - - ch = un->un_ch; - if (!ch || ch->magic != DGAP_CHANNEL_MAGIC) - return 0; - - bd = ch->ch_bd; - if (!bd || bd->magic != DGAP_BOARD_MAGIC) - return 0; - - bs = ch->ch_bs; - if (!bs) - return 0; - - spin_lock_irqsave(&bd->bd_lock, lock_flags); - spin_lock_irqsave(&ch->ch_lock, lock_flags2); - - tmask = (ch->ch_tsize - 1); - - /* Get Transmit queue pointers */ - thead = readw(&bs->tx_head) & tmask; - ttail = readw(&bs->tx_tail) & tmask; - - /* Get tbusy flag */ - tbusy = readb(&bs->tbusy); - - /* Get Command queue pointers */ - chead = readw(&ch->ch_cm->cm_head); - ctail = readw(&ch->ch_cm->cm_tail); - - spin_unlock_irqrestore(&ch->ch_lock, lock_flags2); - spin_unlock_irqrestore(&bd->bd_lock, lock_flags); - - /* - * The only way we know for sure if there is no pending - * data left to be transferred, is if: - * 1) Transmit head and tail are equal (empty). - * 2) Command queue head and tail are equal (empty). - * 3) The "TBUSY" flag is 0. (Transmitter not busy). - */ - - if ((ttail == thead) && (tbusy == 0) && (chead == ctail)) { - chars = 0; - } else { - if (thead >= ttail) - chars = thead - ttail; - else - chars = thead - ttail + ch->ch_tsize; - /* - * Fudge factor here. - * If chars is zero, we know that the command queue had - * something in it or tbusy was set. Because we cannot - * be sure if there is still some data to be transmitted, - * lets lie, and tell ld we have 1 byte left. - */ - if (chars == 0) { - /* - * If TBUSY is still set, and our tx buffers are empty, - * force the firmware to send me another wakeup after - * TBUSY has been cleared. - */ - if (tbusy != 0) { - spin_lock_irqsave(&ch->ch_lock, lock_flags); - un->un_flags |= UN_EMPTY; - writeb(1, &bs->iempty); - spin_unlock_irqrestore(&ch->ch_lock, - lock_flags); - } - chars = 1; - } - } - - return chars; -} - -static int dgap_wait_for_drain(struct tty_struct *tty) -{ - struct channel_t *ch; - struct un_t *un; - struct bs_t __iomem *bs; - int ret = 0; - uint count = 1; - ulong lock_flags = 0; - - if (!tty || tty->magic != TTY_MAGIC) - return -EIO; - - un = tty->driver_data; - if (!un || un->magic != DGAP_UNIT_MAGIC) - return -EIO; - - ch = un->un_ch; - if (!ch || ch->magic != DGAP_CHANNEL_MAGIC) - return -EIO; - - bs = ch->ch_bs; - if (!bs) - return -EIO; - - /* Loop until data is drained */ - while (count != 0) { - count = dgap_tty_chars_in_buffer(tty); - - if (count == 0) - break; - - /* Set flag waiting for drain */ - spin_lock_irqsave(&ch->ch_lock, lock_flags); - un->un_flags |= UN_EMPTY; - writeb(1, &bs->iempty); - spin_unlock_irqrestore(&ch->ch_lock, lock_flags); - - /* Go to sleep till we get woken up */ - ret = wait_event_interruptible(un->un_flags_wait, - ((un->un_flags & UN_EMPTY) == 0)); - /* If ret is non-zero, user ctrl-c'ed us */ - if (ret) - break; - } - - spin_lock_irqsave(&ch->ch_lock, lock_flags); - un->un_flags &= ~(UN_EMPTY); - spin_unlock_irqrestore(&ch->ch_lock, lock_flags); - - return ret; -} - -/* - * dgap_maxcps_room - * - * Reduces bytes_available to the max number of characters - * that can be sent currently given the maxcps value, and - * returns the new bytes_available. This only affects printer - * output. - */ -static int dgap_maxcps_room(struct channel_t *ch, struct un_t *un, - int bytes_available) -{ - /* - * If its not the Transparent print device, return - * the full data amount. - */ - if (un->un_type != DGAP_PRINT) - return bytes_available; - - if (ch->ch_digi.digi_maxcps > 0 && ch->ch_digi.digi_bufsize > 0) { - int cps_limit = 0; - unsigned long current_time = jiffies; - unsigned long buffer_time = current_time + - (HZ * ch->ch_digi.digi_bufsize) / - ch->ch_digi.digi_maxcps; - - if (ch->ch_cpstime < current_time) { - /* buffer is empty */ - ch->ch_cpstime = current_time; /* reset ch_cpstime */ - cps_limit = ch->ch_digi.digi_bufsize; - } else if (ch->ch_cpstime < buffer_time) { - /* still room in the buffer */ - cps_limit = ((buffer_time - ch->ch_cpstime) * - ch->ch_digi.digi_maxcps) / HZ; - } else { - /* no room in the buffer */ - cps_limit = 0; - } - - bytes_available = min(cps_limit, bytes_available); - } - - return bytes_available; -} - -static inline void dgap_set_firmware_event(struct un_t *un, unsigned int event) -{ - struct channel_t *ch; - struct bs_t __iomem *bs; - - if (!un || un->magic != DGAP_UNIT_MAGIC) - return; - ch = un->un_ch; - if (!ch || ch->magic != DGAP_CHANNEL_MAGIC) - return; - bs = ch->ch_bs; - if (!bs) - return; - - if ((event & UN_LOW) != 0) { - if ((un->un_flags & UN_LOW) == 0) { - un->un_flags |= UN_LOW; - writeb(1, &bs->ilow); - } - } - if ((event & UN_LOW) != 0) { - if ((un->un_flags & UN_EMPTY) == 0) { - un->un_flags |= UN_EMPTY; - writeb(1, &bs->iempty); - } - } -} - -/* - * dgap_tty_write_room() - * - * Return space available in Tx buffer - */ -static int dgap_tty_write_room(struct tty_struct *tty) -{ - struct channel_t *ch; - struct un_t *un; - struct bs_t __iomem *bs; - u16 head, tail, tmask; - int ret; - ulong lock_flags = 0; - - if (!tty) - return 0; - - un = tty->driver_data; - if (!un || un->magic != DGAP_UNIT_MAGIC) - return 0; - - ch = un->un_ch; - if (!ch || ch->magic != DGAP_CHANNEL_MAGIC) - return 0; - - bs = ch->ch_bs; - if (!bs) - return 0; - - spin_lock_irqsave(&ch->ch_lock, lock_flags); - - tmask = ch->ch_tsize - 1; - head = readw(&bs->tx_head) & tmask; - tail = readw(&bs->tx_tail) & tmask; - - ret = tail - head - 1; - if (ret < 0) - ret += ch->ch_tsize; - - /* Limit printer to maxcps */ - ret = dgap_maxcps_room(ch, un, ret); - - /* - * If we are printer device, leave space for - * possibly both the on and off strings. - */ - if (un->un_type == DGAP_PRINT) { - if (!(ch->ch_flags & CH_PRON)) - ret -= ch->ch_digi.digi_onlen; - ret -= ch->ch_digi.digi_offlen; - } else { - if (ch->ch_flags & CH_PRON) - ret -= ch->ch_digi.digi_offlen; - } - - if (ret < 0) - ret = 0; - - /* - * Schedule FEP to wake us up if needed. - * - * TODO: This might be overkill... - * Do we really need to schedule callbacks from the FEP - * in every case? Can we get smarter based on ret? - */ - dgap_set_firmware_event(un, UN_LOW | UN_EMPTY); - spin_unlock_irqrestore(&ch->ch_lock, lock_flags); - - return ret; -} - -/* - * dgap_tty_write() - * - * Take data from the user or kernel and send it out to the FEP. - * In here exists all the Transparent Print magic as well. - */ -static int dgap_tty_write(struct tty_struct *tty, const unsigned char *buf, - int count) -{ - struct channel_t *ch; - struct un_t *un; - struct bs_t __iomem *bs; - char __iomem *vaddr; - u16 head, tail, tmask, remain; - int bufcount, n; - ulong lock_flags; - - if (!tty) - return 0; - - un = tty->driver_data; - if (!un || un->magic != DGAP_UNIT_MAGIC) - return 0; - - ch = un->un_ch; - if (!ch || ch->magic != DGAP_CHANNEL_MAGIC) - return 0; - - bs = ch->ch_bs; - if (!bs) - return 0; - - if (!count) - return 0; - - spin_lock_irqsave(&ch->ch_lock, lock_flags); - - /* Get our space available for the channel from the board */ - tmask = ch->ch_tsize - 1; - head = readw(&(bs->tx_head)) & tmask; - tail = readw(&(bs->tx_tail)) & tmask; - - bufcount = tail - head - 1; - if (bufcount < 0) - bufcount += ch->ch_tsize; - - /* - * Limit printer output to maxcps overall, with bursts allowed - * up to bufsize characters. - */ - bufcount = dgap_maxcps_room(ch, un, bufcount); - - /* - * Take minimum of what the user wants to send, and the - * space available in the FEP buffer. - */ - count = min(count, bufcount); - - /* - * Bail if no space left. - */ - if (count <= 0) { - dgap_set_firmware_event(un, UN_LOW | UN_EMPTY); - spin_unlock_irqrestore(&ch->ch_lock, lock_flags); - return 0; - } - - /* - * Output the printer ON string, if we are in terminal mode, but - * need to be in printer mode. - */ - if ((un->un_type == DGAP_PRINT) && !(ch->ch_flags & CH_PRON)) { - dgap_wmove(ch, ch->ch_digi.digi_onstr, - (int)ch->ch_digi.digi_onlen); - head = readw(&bs->tx_head) & tmask; - ch->ch_flags |= CH_PRON; - } - - /* - * On the other hand, output the printer OFF string, if we are - * currently in printer mode, but need to output to the terminal. - */ - if ((un->un_type != DGAP_PRINT) && (ch->ch_flags & CH_PRON)) { - dgap_wmove(ch, ch->ch_digi.digi_offstr, - (int)ch->ch_digi.digi_offlen); - head = readw(&bs->tx_head) & tmask; - ch->ch_flags &= ~CH_PRON; - } - - n = count; - - /* - * If the write wraps over the top of the circular buffer, - * move the portion up to the wrap point, and reset the - * pointers to the bottom. - */ - remain = ch->ch_tstart + ch->ch_tsize - head; - - if (n >= remain) { - n -= remain; - vaddr = ch->ch_taddr + head; - - memcpy_toio(vaddr, (u8 *)buf, remain); - - head = ch->ch_tstart; - buf += remain; - } - - if (n > 0) { - /* - * Move rest of data. - */ - vaddr = ch->ch_taddr + head; - remain = n; - - memcpy_toio(vaddr, (u8 *)buf, remain); - head += remain; - } - - if (count) { - ch->ch_txcount += count; - head &= tmask; - writew(head, &bs->tx_head); - } - - dgap_set_firmware_event(un, UN_LOW | UN_EMPTY); - - /* - * If this is the print device, and the - * printer is still on, we need to turn it - * off before going idle. If the buffer is - * non-empty, wait until it goes empty. - * Otherwise turn it off right now. - */ - if ((un->un_type == DGAP_PRINT) && (ch->ch_flags & CH_PRON)) { - tail = readw(&bs->tx_tail) & tmask; - - if (tail != head) { - un->un_flags |= UN_EMPTY; - writeb(1, &bs->iempty); - } else { - dgap_wmove(ch, ch->ch_digi.digi_offstr, - (int)ch->ch_digi.digi_offlen); - head = readw(&bs->tx_head) & tmask; - ch->ch_flags &= ~CH_PRON; - } - } - - /* Update printer buffer empty time. */ - if ((un->un_type == DGAP_PRINT) && (ch->ch_digi.digi_maxcps > 0) - && (ch->ch_digi.digi_bufsize > 0)) { - ch->ch_cpstime += (HZ * count) / ch->ch_digi.digi_maxcps; - } - - spin_unlock_irqrestore(&ch->ch_lock, lock_flags); - - return count; -} - -/* - * dgap_tty_put_char() - * - * Put a character into ch->ch_buf - * - * - used by the line discipline for OPOST processing - */ -static int dgap_tty_put_char(struct tty_struct *tty, unsigned char c) -{ - /* - * Simply call tty_write. - */ - dgap_tty_write(tty, &c, 1); - return 1; -} - -/* - * Return modem signals to ld. - */ -static int dgap_tty_tiocmget(struct tty_struct *tty) -{ - struct channel_t *ch; - struct un_t *un; - int result; - u8 mstat; - ulong lock_flags; - - if (!tty || tty->magic != TTY_MAGIC) - return -EIO; - - un = tty->driver_data; - if (!un || un->magic != DGAP_UNIT_MAGIC) - return -EIO; - - ch = un->un_ch; - if (!ch || ch->magic != DGAP_CHANNEL_MAGIC) - return -EIO; - - spin_lock_irqsave(&ch->ch_lock, lock_flags); - - mstat = readb(&ch->ch_bs->m_stat); - /* Append any outbound signals that might be pending... */ - mstat |= ch->ch_mostat; - - spin_unlock_irqrestore(&ch->ch_lock, lock_flags); - - result = 0; - - if (mstat & D_DTR(ch)) - result |= TIOCM_DTR; - if (mstat & D_RTS(ch)) - result |= TIOCM_RTS; - if (mstat & D_CTS(ch)) - result |= TIOCM_CTS; - if (mstat & D_DSR(ch)) - result |= TIOCM_DSR; - if (mstat & D_RI(ch)) - result |= TIOCM_RI; - if (mstat & D_CD(ch)) - result |= TIOCM_CD; - - return result; -} - -/* - * dgap_tty_tiocmset() - * - * Set modem signals, called by ld. - */ -static int dgap_tty_tiocmset(struct tty_struct *tty, - unsigned int set, unsigned int clear) -{ - struct board_t *bd; - struct channel_t *ch; - struct un_t *un; - ulong lock_flags; - ulong lock_flags2; - - if (!tty || tty->magic != TTY_MAGIC) - return -EIO; - - un = tty->driver_data; - if (!un || un->magic != DGAP_UNIT_MAGIC) - return -EIO; - - ch = un->un_ch; - if (!ch || ch->magic != DGAP_CHANNEL_MAGIC) - return -EIO; - - bd = ch->ch_bd; - if (!bd || bd->magic != DGAP_BOARD_MAGIC) - return -EIO; - - spin_lock_irqsave(&bd->bd_lock, lock_flags); - spin_lock_irqsave(&ch->ch_lock, lock_flags2); - - if (set & TIOCM_RTS) { - ch->ch_mforce |= D_RTS(ch); - ch->ch_mval |= D_RTS(ch); - } - - if (set & TIOCM_DTR) { - ch->ch_mforce |= D_DTR(ch); - ch->ch_mval |= D_DTR(ch); - } - - if (clear & TIOCM_RTS) { - ch->ch_mforce |= D_RTS(ch); - ch->ch_mval &= ~(D_RTS(ch)); - } - - if (clear & TIOCM_DTR) { - ch->ch_mforce |= D_DTR(ch); - ch->ch_mval &= ~(D_DTR(ch)); - } - - dgap_param(ch, bd, un->un_type); - - spin_unlock_irqrestore(&ch->ch_lock, lock_flags2); - spin_unlock_irqrestore(&bd->bd_lock, lock_flags); - - return 0; -} - -/* - * dgap_tty_send_break() - * - * Send a Break, called by ld. - */ -static int dgap_tty_send_break(struct tty_struct *tty, int msec) -{ - struct board_t *bd; - struct channel_t *ch; - struct un_t *un; - ulong lock_flags; - ulong lock_flags2; - - if (!tty || tty->magic != TTY_MAGIC) - return -EIO; - - un = tty->driver_data; - if (!un || un->magic != DGAP_UNIT_MAGIC) - return -EIO; - - ch = un->un_ch; - if (!ch || ch->magic != DGAP_CHANNEL_MAGIC) - return -EIO; - - bd = ch->ch_bd; - if (!bd || bd->magic != DGAP_BOARD_MAGIC) - return -EIO; - - switch (msec) { - case -1: - msec = 0xFFFF; - break; - case 0: - msec = 1; - break; - default: - msec /= 10; - break; - } - - spin_lock_irqsave(&bd->bd_lock, lock_flags); - spin_lock_irqsave(&ch->ch_lock, lock_flags2); -#if 0 - dgap_cmdw(ch, SBREAK, (u16) SBREAK_TIME, 0); -#endif - dgap_cmdw(ch, SBREAK, (u16)msec, 0); - - spin_unlock_irqrestore(&ch->ch_lock, lock_flags2); - spin_unlock_irqrestore(&bd->bd_lock, lock_flags); - - return 0; -} - -/* - * dgap_tty_wait_until_sent() - * - * wait until data has been transmitted, called by ld. - */ -static void dgap_tty_wait_until_sent(struct tty_struct *tty, int timeout) -{ - dgap_wait_for_drain(tty); -} - -/* - * dgap_send_xchar() - * - * send a high priority character, called by ld. - */ -static void dgap_tty_send_xchar(struct tty_struct *tty, char c) -{ - struct board_t *bd; - struct channel_t *ch; - struct un_t *un; - ulong lock_flags; - ulong lock_flags2; - - if (!tty || tty->magic != TTY_MAGIC) - return; - - un = tty->driver_data; - if (!un || un->magic != DGAP_UNIT_MAGIC) - return; - - ch = un->un_ch; - if (!ch || ch->magic != DGAP_CHANNEL_MAGIC) - return; - - bd = ch->ch_bd; - if (!bd || bd->magic != DGAP_BOARD_MAGIC) - return; - - spin_lock_irqsave(&bd->bd_lock, lock_flags); - spin_lock_irqsave(&ch->ch_lock, lock_flags2); - - /* - * This is technically what we should do. - * However, the NIST tests specifically want - * to see each XON or XOFF character that it - * sends, so lets just send each character - * by hand... - */ -#if 0 - if (c == STOP_CHAR(tty)) - dgap_cmdw(ch, RPAUSE, 0, 0); - else if (c == START_CHAR(tty)) - dgap_cmdw(ch, RRESUME, 0, 0); - else - dgap_wmove(ch, &c, 1); -#else - dgap_wmove(ch, &c, 1); -#endif - - spin_unlock_irqrestore(&ch->ch_lock, lock_flags2); - spin_unlock_irqrestore(&bd->bd_lock, lock_flags); -} - -/* - * Return modem signals to ld. - */ -static int dgap_get_modem_info(struct channel_t *ch, unsigned int __user *value) -{ - int result; - u8 mstat; - ulong lock_flags; - - spin_lock_irqsave(&ch->ch_lock, lock_flags); - - mstat = readb(&ch->ch_bs->m_stat); - /* Append any outbound signals that might be pending... */ - mstat |= ch->ch_mostat; - - spin_unlock_irqrestore(&ch->ch_lock, lock_flags); - - result = 0; - - if (mstat & D_DTR(ch)) - result |= TIOCM_DTR; - if (mstat & D_RTS(ch)) - result |= TIOCM_RTS; - if (mstat & D_CTS(ch)) - result |= TIOCM_CTS; - if (mstat & D_DSR(ch)) - result |= TIOCM_DSR; - if (mstat & D_RI(ch)) - result |= TIOCM_RI; - if (mstat & D_CD(ch)) - result |= TIOCM_CD; - - return put_user(result, value); -} - -/* - * dgap_set_modem_info() - * - * Set modem signals, called by ld. - */ -static int dgap_set_modem_info(struct channel_t *ch, struct board_t *bd, - struct un_t *un, unsigned int command, - unsigned int __user *value) -{ - int ret; - unsigned int arg; - ulong lock_flags; - ulong lock_flags2; - - ret = get_user(arg, value); - if (ret) - return ret; - - switch (command) { - case TIOCMBIS: - if (arg & TIOCM_RTS) { - ch->ch_mforce |= D_RTS(ch); - ch->ch_mval |= D_RTS(ch); - } - - if (arg & TIOCM_DTR) { - ch->ch_mforce |= D_DTR(ch); - ch->ch_mval |= D_DTR(ch); - } - - break; - - case TIOCMBIC: - if (arg & TIOCM_RTS) { - ch->ch_mforce |= D_RTS(ch); - ch->ch_mval &= ~(D_RTS(ch)); - } - - if (arg & TIOCM_DTR) { - ch->ch_mforce |= D_DTR(ch); - ch->ch_mval &= ~(D_DTR(ch)); - } - - break; - - case TIOCMSET: - ch->ch_mforce = D_DTR(ch) | D_RTS(ch); - - if (arg & TIOCM_RTS) - ch->ch_mval |= D_RTS(ch); - else - ch->ch_mval &= ~(D_RTS(ch)); - - if (arg & TIOCM_DTR) - ch->ch_mval |= (D_DTR(ch)); - else - ch->ch_mval &= ~(D_DTR(ch)); - - break; - - default: - return -EINVAL; - } - - spin_lock_irqsave(&bd->bd_lock, lock_flags); - spin_lock_irqsave(&ch->ch_lock, lock_flags2); - - dgap_param(ch, bd, un->un_type); - - spin_unlock_irqrestore(&ch->ch_lock, lock_flags2); - spin_unlock_irqrestore(&bd->bd_lock, lock_flags); - - return 0; -} - -/* - * dgap_tty_digigeta() - * - * Ioctl to get the information for ditty. - * - * - * - */ -static int dgap_tty_digigeta(struct channel_t *ch, - struct digi_t __user *retinfo) -{ - struct digi_t tmp; - ulong lock_flags; - - if (!retinfo) - return -EFAULT; - - memset(&tmp, 0, sizeof(tmp)); - - spin_lock_irqsave(&ch->ch_lock, lock_flags); - memcpy(&tmp, &ch->ch_digi, sizeof(tmp)); - spin_unlock_irqrestore(&ch->ch_lock, lock_flags); - - if (copy_to_user(retinfo, &tmp, sizeof(*retinfo))) - return -EFAULT; - - return 0; -} - -/* - * dgap_tty_digiseta() - * - * Ioctl to set the information for ditty. - * - * - * - */ -static int dgap_tty_digiseta(struct channel_t *ch, struct board_t *bd, - struct un_t *un, struct digi_t __user *new_info) -{ - struct digi_t new_digi; - ulong lock_flags = 0; - unsigned long lock_flags2; - - if (copy_from_user(&new_digi, new_info, sizeof(struct digi_t))) - return -EFAULT; - - spin_lock_irqsave(&bd->bd_lock, lock_flags); - spin_lock_irqsave(&ch->ch_lock, lock_flags2); - - memcpy(&ch->ch_digi, &new_digi, sizeof(struct digi_t)); - - if (ch->ch_digi.digi_maxcps < 1) - ch->ch_digi.digi_maxcps = 1; - - if (ch->ch_digi.digi_maxcps > 10000) - ch->ch_digi.digi_maxcps = 10000; - - if (ch->ch_digi.digi_bufsize < 10) - ch->ch_digi.digi_bufsize = 10; - - if (ch->ch_digi.digi_maxchar < 1) - ch->ch_digi.digi_maxchar = 1; - - if (ch->ch_digi.digi_maxchar > ch->ch_digi.digi_bufsize) - ch->ch_digi.digi_maxchar = ch->ch_digi.digi_bufsize; - - if (ch->ch_digi.digi_onlen > DIGI_PLEN) - ch->ch_digi.digi_onlen = DIGI_PLEN; - - if (ch->ch_digi.digi_offlen > DIGI_PLEN) - ch->ch_digi.digi_offlen = DIGI_PLEN; - - dgap_param(ch, bd, un->un_type); - - spin_unlock_irqrestore(&ch->ch_lock, lock_flags2); - spin_unlock_irqrestore(&bd->bd_lock, lock_flags); - - return 0; -} - -/* - * dgap_tty_digigetedelay() - * - * Ioctl to get the current edelay setting. - * - * - * - */ -static int dgap_tty_digigetedelay(struct tty_struct *tty, int __user *retinfo) -{ - struct channel_t *ch; - struct un_t *un; - int tmp; - ulong lock_flags; - - if (!retinfo) - return -EFAULT; - - if (!tty || tty->magic != TTY_MAGIC) - return -EFAULT; - - un = tty->driver_data; - if (!un || un->magic != DGAP_UNIT_MAGIC) - return -EFAULT; - - ch = un->un_ch; - if (!ch || ch->magic != DGAP_CHANNEL_MAGIC) - return -EFAULT; - - memset(&tmp, 0, sizeof(tmp)); - - spin_lock_irqsave(&ch->ch_lock, lock_flags); - tmp = readw(&ch->ch_bs->edelay); - spin_unlock_irqrestore(&ch->ch_lock, lock_flags); - - if (copy_to_user(retinfo, &tmp, sizeof(*retinfo))) - return -EFAULT; - - return 0; -} - -/* - * dgap_tty_digisetedelay() - * - * Ioctl to set the EDELAY setting - * - */ -static int dgap_tty_digisetedelay(struct channel_t *ch, struct board_t *bd, - struct un_t *un, int __user *new_info) -{ - int new_digi; - ulong lock_flags; - ulong lock_flags2; - - if (copy_from_user(&new_digi, new_info, sizeof(int))) - return -EFAULT; - - spin_lock_irqsave(&bd->bd_lock, lock_flags); - spin_lock_irqsave(&ch->ch_lock, lock_flags2); - - writew((u16)new_digi, &ch->ch_bs->edelay); - - dgap_param(ch, bd, un->un_type); - - spin_unlock_irqrestore(&ch->ch_lock, lock_flags2); - spin_unlock_irqrestore(&bd->bd_lock, lock_flags); - - return 0; -} - -/* - * dgap_tty_digigetcustombaud() - * - * Ioctl to get the current custom baud rate setting. - */ -static int dgap_tty_digigetcustombaud(struct channel_t *ch, struct un_t *un, - int __user *retinfo) -{ - int tmp; - ulong lock_flags; - - if (!retinfo) - return -EFAULT; - - memset(&tmp, 0, sizeof(tmp)); - - spin_lock_irqsave(&ch->ch_lock, lock_flags); - tmp = dgap_get_custom_baud(ch); - spin_unlock_irqrestore(&ch->ch_lock, lock_flags); - - if (copy_to_user(retinfo, &tmp, sizeof(*retinfo))) - return -EFAULT; - - return 0; -} - -/* - * dgap_tty_digisetcustombaud() - * - * Ioctl to set the custom baud rate setting - */ -static int dgap_tty_digisetcustombaud(struct channel_t *ch, struct board_t *bd, - struct un_t *un, int __user *new_info) -{ - uint new_rate; - ulong lock_flags; - ulong lock_flags2; - - if (copy_from_user(&new_rate, new_info, sizeof(unsigned int))) - return -EFAULT; - - if (bd->bd_flags & BD_FEP5PLUS) { - spin_lock_irqsave(&bd->bd_lock, lock_flags); - spin_lock_irqsave(&ch->ch_lock, lock_flags2); - - ch->ch_custom_speed = new_rate; - - dgap_param(ch, bd, un->un_type); - - spin_unlock_irqrestore(&ch->ch_lock, lock_flags2); - spin_unlock_irqrestore(&bd->bd_lock, lock_flags); - } - - return 0; -} - -/* - * dgap_set_termios() - */ -static void dgap_tty_set_termios(struct tty_struct *tty, - struct ktermios *old_termios) -{ - struct board_t *bd; - struct channel_t *ch; - struct un_t *un; - unsigned long lock_flags; - unsigned long lock_flags2; - - if (!tty || tty->magic != TTY_MAGIC) - return; - - un = tty->driver_data; - if (!un || un->magic != DGAP_UNIT_MAGIC) - return; - - ch = un->un_ch; - if (!ch || ch->magic != DGAP_CHANNEL_MAGIC) - return; - - bd = ch->ch_bd; - if (!bd || bd->magic != DGAP_BOARD_MAGIC) - return; - - spin_lock_irqsave(&bd->bd_lock, lock_flags); - spin_lock_irqsave(&ch->ch_lock, lock_flags2); - - ch->ch_c_cflag = tty->termios.c_cflag; - ch->ch_c_iflag = tty->termios.c_iflag; - ch->ch_c_oflag = tty->termios.c_oflag; - ch->ch_c_lflag = tty->termios.c_lflag; - ch->ch_startc = tty->termios.c_cc[VSTART]; - ch->ch_stopc = tty->termios.c_cc[VSTOP]; - - dgap_carrier(ch); - dgap_param(ch, bd, un->un_type); - - spin_unlock_irqrestore(&ch->ch_lock, lock_flags2); - spin_unlock_irqrestore(&bd->bd_lock, lock_flags); -} - -static void dgap_tty_throttle(struct tty_struct *tty) -{ - struct board_t *bd; - struct channel_t *ch; - struct un_t *un; - ulong lock_flags; - ulong lock_flags2; - - if (!tty || tty->magic != TTY_MAGIC) - return; - - un = tty->driver_data; - if (!un || un->magic != DGAP_UNIT_MAGIC) - return; - - ch = un->un_ch; - if (!ch || ch->magic != DGAP_CHANNEL_MAGIC) - return; - - bd = ch->ch_bd; - if (!bd || bd->magic != DGAP_BOARD_MAGIC) - return; - - spin_lock_irqsave(&bd->bd_lock, lock_flags); - spin_lock_irqsave(&ch->ch_lock, lock_flags2); - - ch->ch_flags |= (CH_RXBLOCK); -#if 1 - dgap_cmdw(ch, RPAUSE, 0, 0); -#endif - - spin_unlock_irqrestore(&ch->ch_lock, lock_flags2); - spin_unlock_irqrestore(&bd->bd_lock, lock_flags); -} - -static void dgap_tty_unthrottle(struct tty_struct *tty) -{ - struct board_t *bd; - struct channel_t *ch; - struct un_t *un; - ulong lock_flags; - ulong lock_flags2; - - if (!tty || tty->magic != TTY_MAGIC) - return; - - un = tty->driver_data; - if (!un || un->magic != DGAP_UNIT_MAGIC) - return; - - ch = un->un_ch; - if (!ch || ch->magic != DGAP_CHANNEL_MAGIC) - return; - - bd = ch->ch_bd; - if (!bd || bd->magic != DGAP_BOARD_MAGIC) - return; - - spin_lock_irqsave(&bd->bd_lock, lock_flags); - spin_lock_irqsave(&ch->ch_lock, lock_flags2); - - ch->ch_flags &= ~(CH_RXBLOCK); - -#if 1 - dgap_cmdw(ch, RRESUME, 0, 0); -#endif - - spin_unlock_irqrestore(&ch->ch_lock, lock_flags2); - spin_unlock_irqrestore(&bd->bd_lock, lock_flags); -} - -static struct board_t *find_board_by_major(unsigned int major) -{ - unsigned int i; - - for (i = 0; i < MAXBOARDS; i++) { - struct board_t *brd = dgap_board[i]; - - if (!brd) - return NULL; - if (major == brd->serial_driver->major || - major == brd->print_driver->major) - return brd; - } - - return NULL; -} - -/************************************************************************ - * - * TTY Entry points and helper functions - * - ************************************************************************/ - -/* - * dgap_tty_open() - * - */ -static int dgap_tty_open(struct tty_struct *tty, struct file *file) -{ - struct board_t *brd; - struct channel_t *ch; - struct un_t *un; - struct bs_t __iomem *bs; - uint major; - uint minor; - int rc; - ulong lock_flags; - ulong lock_flags2; - u16 head; - - major = MAJOR(tty_devnum(tty)); - minor = MINOR(tty_devnum(tty)); - - brd = find_board_by_major(major); - if (!brd) - return -EIO; - - /* - * If board is not yet up to a state of READY, go to - * sleep waiting for it to happen or they cancel the open. - */ - rc = wait_event_interruptible(brd->state_wait, - (brd->state & BOARD_READY)); - - if (rc) - return rc; - - spin_lock_irqsave(&brd->bd_lock, lock_flags); - - /* The wait above should guarantee this cannot happen */ - if (brd->state != BOARD_READY) { - spin_unlock_irqrestore(&brd->bd_lock, lock_flags); - return -EIO; - } - - /* If opened device is greater than our number of ports, bail. */ - if (MINOR(tty_devnum(tty)) > brd->nasync) { - spin_unlock_irqrestore(&brd->bd_lock, lock_flags); - return -EIO; - } - - ch = brd->channels[minor]; - if (!ch) { - spin_unlock_irqrestore(&brd->bd_lock, lock_flags); - return -EIO; - } - - /* Grab channel lock */ - spin_lock_irqsave(&ch->ch_lock, lock_flags2); - - /* Figure out our type */ - if (major == brd->serial_driver->major) { - un = &brd->channels[minor]->ch_tun; - un->un_type = DGAP_SERIAL; - } else if (major == brd->print_driver->major) { - un = &brd->channels[minor]->ch_pun; - un->un_type = DGAP_PRINT; - } else { - spin_unlock_irqrestore(&ch->ch_lock, lock_flags2); - spin_unlock_irqrestore(&brd->bd_lock, lock_flags); - return -EIO; - } - - /* Store our unit into driver_data, so we always have it available. */ - tty->driver_data = un; - - /* - * Error if channel info pointer is NULL. - */ - bs = ch->ch_bs; - if (!bs) { - spin_unlock_irqrestore(&ch->ch_lock, lock_flags2); - spin_unlock_irqrestore(&brd->bd_lock, lock_flags); - return -EIO; - } - - /* - * Initialize tty's - */ - if (!(un->un_flags & UN_ISOPEN)) { - /* Store important variables. */ - un->un_tty = tty; - - /* Maybe do something here to the TTY struct as well? */ - } - - /* - * Initialize if neither terminal or printer is open. - */ - if (!((ch->ch_tun.un_flags | ch->ch_pun.un_flags) & UN_ISOPEN)) { - ch->ch_mforce = 0; - ch->ch_mval = 0; - - /* - * Flush input queue. - */ - head = readw(&bs->rx_head); - writew(head, &bs->rx_tail); - - ch->ch_flags = 0; - ch->pscan_state = 0; - ch->pscan_savechar = 0; - - ch->ch_c_cflag = tty->termios.c_cflag; - ch->ch_c_iflag = tty->termios.c_iflag; - ch->ch_c_oflag = tty->termios.c_oflag; - ch->ch_c_lflag = tty->termios.c_lflag; - ch->ch_startc = tty->termios.c_cc[VSTART]; - ch->ch_stopc = tty->termios.c_cc[VSTOP]; - - /* TODO: flush our TTY struct here? */ - } - - dgap_carrier(ch); - /* - * Run param in case we changed anything - */ - dgap_param(ch, brd, un->un_type); - - /* - * follow protocol for opening port - */ - - spin_unlock_irqrestore(&ch->ch_lock, lock_flags2); - spin_unlock_irqrestore(&brd->bd_lock, lock_flags); - - rc = dgap_block_til_ready(tty, file, ch); - - if (!un->un_tty) - return -ENODEV; - - /* No going back now, increment our unit and channel counters */ - spin_lock_irqsave(&ch->ch_lock, lock_flags); - ch->ch_open_count++; - un->un_open_count++; - un->un_flags |= (UN_ISOPEN); - spin_unlock_irqrestore(&ch->ch_lock, lock_flags); - - return rc; -} - -/* - * dgap_tty_close() - * - */ -static void dgap_tty_close(struct tty_struct *tty, struct file *file) -{ - struct board_t *bd; - struct channel_t *ch; - struct un_t *un; - ulong lock_flags; - - if (!tty || tty->magic != TTY_MAGIC) - return; - - un = tty->driver_data; - if (!un || un->magic != DGAP_UNIT_MAGIC) - return; - - ch = un->un_ch; - if (!ch || ch->magic != DGAP_CHANNEL_MAGIC) - return; - - bd = ch->ch_bd; - if (!bd || bd->magic != DGAP_BOARD_MAGIC) - return; - - spin_lock_irqsave(&ch->ch_lock, lock_flags); - - /* - * Determine if this is the last close or not - and if we agree about - * which type of close it is with the Line Discipline - */ - if ((tty->count == 1) && (un->un_open_count != 1)) { - /* - * Uh, oh. tty->count is 1, which means that the tty - * structure will be freed. un_open_count should always - * be one in these conditions. If it's greater than - * one, we've got real problems, since it means the - * serial port won't be shutdown. - */ - un->un_open_count = 1; - } - - if (--un->un_open_count < 0) - un->un_open_count = 0; - - ch->ch_open_count--; - - if (ch->ch_open_count && un->un_open_count) { - spin_unlock_irqrestore(&ch->ch_lock, lock_flags); - return; - } - - /* OK, its the last close on the unit */ - - un->un_flags |= UN_CLOSING; - - tty->closing = 1; - - /* - * Only officially close channel if count is 0 and - * DIGI_PRINTER bit is not set. - */ - if ((ch->ch_open_count == 0) && - !(ch->ch_digi.digi_flags & DIGI_PRINTER)) { - ch->ch_flags &= ~(CH_RXBLOCK); - - spin_unlock_irqrestore(&ch->ch_lock, lock_flags); - - /* wait for output to drain */ - /* This will also return if we take an interrupt */ - - dgap_wait_for_drain(tty); - - dgap_tty_flush_buffer(tty); - tty_ldisc_flush(tty); - - spin_lock_irqsave(&ch->ch_lock, lock_flags); - - tty->closing = 0; - - /* - * If we have HUPCL set, lower DTR and RTS - */ - if (ch->ch_c_cflag & HUPCL) { - ch->ch_mostat &= ~(D_RTS(ch) | D_DTR(ch)); - dgap_cmdb(ch, SMODEM, 0, D_DTR(ch) | D_RTS(ch), 0); - - /* - * Go to sleep to ensure RTS/DTR - * have been dropped for modems to see it. - */ - spin_unlock_irqrestore(&ch->ch_lock, - lock_flags); - - /* .25 second delay for dropping RTS/DTR */ - schedule_timeout_interruptible(msecs_to_jiffies(250)); - - spin_lock_irqsave(&ch->ch_lock, lock_flags); - } - - ch->pscan_state = 0; - ch->pscan_savechar = 0; - ch->ch_baud_info = 0; - } - - /* - * turn off print device when closing print device. - */ - if ((un->un_type == DGAP_PRINT) && (ch->ch_flags & CH_PRON)) { - dgap_wmove(ch, ch->ch_digi.digi_offstr, - (int)ch->ch_digi.digi_offlen); - ch->ch_flags &= ~CH_PRON; - } - - un->un_tty = NULL; - un->un_flags &= ~(UN_ISOPEN | UN_CLOSING); - tty->driver_data = NULL; - - wake_up_interruptible(&ch->ch_flags_wait); - wake_up_interruptible(&un->un_flags_wait); - - spin_unlock_irqrestore(&ch->ch_lock, lock_flags); -} - -static void dgap_tty_start(struct tty_struct *tty) -{ - struct board_t *bd; - struct channel_t *ch; - struct un_t *un; - ulong lock_flags; - ulong lock_flags2; - - if (!tty || tty->magic != TTY_MAGIC) - return; - - un = tty->driver_data; - if (!un || un->magic != DGAP_UNIT_MAGIC) - return; - - ch = un->un_ch; - if (!ch || ch->magic != DGAP_CHANNEL_MAGIC) - return; - - bd = ch->ch_bd; - if (!bd || bd->magic != DGAP_BOARD_MAGIC) - return; - - spin_lock_irqsave(&bd->bd_lock, lock_flags); - spin_lock_irqsave(&ch->ch_lock, lock_flags2); - - dgap_cmdw(ch, RESUMETX, 0, 0); - - spin_unlock_irqrestore(&ch->ch_lock, lock_flags2); - spin_unlock_irqrestore(&bd->bd_lock, lock_flags); -} - -static void dgap_tty_stop(struct tty_struct *tty) -{ - struct board_t *bd; - struct channel_t *ch; - struct un_t *un; - ulong lock_flags; - ulong lock_flags2; - - if (!tty || tty->magic != TTY_MAGIC) - return; - - un = tty->driver_data; - if (!un || un->magic != DGAP_UNIT_MAGIC) - return; - - ch = un->un_ch; - if (!ch || ch->magic != DGAP_CHANNEL_MAGIC) - return; - - bd = ch->ch_bd; - if (!bd || bd->magic != DGAP_BOARD_MAGIC) - return; - - spin_lock_irqsave(&bd->bd_lock, lock_flags); - spin_lock_irqsave(&ch->ch_lock, lock_flags2); - - dgap_cmdw(ch, PAUSETX, 0, 0); - - spin_unlock_irqrestore(&ch->ch_lock, lock_flags2); - spin_unlock_irqrestore(&bd->bd_lock, lock_flags); -} - -/* - * dgap_tty_flush_chars() - * - * Flush the cook buffer - * - * Note to self, and any other poor souls who venture here: - * - * flush in this case DOES NOT mean dispose of the data. - * instead, it means "stop buffering and send it if you - * haven't already." Just guess how I figured that out... SRW 2-Jun-98 - * - * It is also always called in interrupt context - JAR 8-Sept-99 - */ -static void dgap_tty_flush_chars(struct tty_struct *tty) -{ - struct board_t *bd; - struct channel_t *ch; - struct un_t *un; - ulong lock_flags; - ulong lock_flags2; - - if (!tty || tty->magic != TTY_MAGIC) - return; - - un = tty->driver_data; - if (!un || un->magic != DGAP_UNIT_MAGIC) - return; - - ch = un->un_ch; - if (!ch || ch->magic != DGAP_CHANNEL_MAGIC) - return; - - bd = ch->ch_bd; - if (!bd || bd->magic != DGAP_BOARD_MAGIC) - return; - - spin_lock_irqsave(&bd->bd_lock, lock_flags); - spin_lock_irqsave(&ch->ch_lock, lock_flags2); - - /* TODO: Do something here */ - - spin_unlock_irqrestore(&ch->ch_lock, lock_flags2); - spin_unlock_irqrestore(&bd->bd_lock, lock_flags); -} - -/***************************************************************************** - * - * The IOCTL function and all of its helpers - * - *****************************************************************************/ - -/* - * dgap_tty_ioctl() - * - * The usual assortment of ioctl's - */ -static int dgap_tty_ioctl(struct tty_struct *tty, unsigned int cmd, - unsigned long arg) -{ - struct board_t *bd; - struct channel_t *ch; - struct un_t *un; - int rc; - u16 head; - ulong lock_flags = 0; - ulong lock_flags2 = 0; - void __user *uarg = (void __user *)arg; - - if (!tty || tty->magic != TTY_MAGIC) - return -ENODEV; - - un = tty->driver_data; - if (!un || un->magic != DGAP_UNIT_MAGIC) - return -ENODEV; - - ch = un->un_ch; - if (!ch || ch->magic != DGAP_CHANNEL_MAGIC) - return -ENODEV; - - bd = ch->ch_bd; - if (!bd || bd->magic != DGAP_BOARD_MAGIC) - return -ENODEV; - - spin_lock_irqsave(&bd->bd_lock, lock_flags); - spin_lock_irqsave(&ch->ch_lock, lock_flags2); - - if (un->un_open_count <= 0) { - spin_unlock_irqrestore(&ch->ch_lock, lock_flags2); - spin_unlock_irqrestore(&bd->bd_lock, lock_flags); - return -EIO; - } - - switch (cmd) { - /* Here are all the standard ioctl's that we MUST implement */ - case TCSBRK: - /* - * TCSBRK is SVID version: non-zero arg --> no break - * this behaviour is exploited by tcdrain(). - * - * According to POSIX.1 spec (7.2.2.1.2) breaks should be - * between 0.25 and 0.5 seconds so we'll ask for something - * in the middle: 0.375 seconds. - */ - rc = tty_check_change(tty); - spin_unlock_irqrestore(&ch->ch_lock, lock_flags2); - spin_unlock_irqrestore(&bd->bd_lock, lock_flags); - if (rc) - return rc; - - rc = dgap_wait_for_drain(tty); - - if (rc) - return -EINTR; - - spin_lock_irqsave(&bd->bd_lock, lock_flags); - spin_lock_irqsave(&ch->ch_lock, lock_flags2); - - if (((cmd == TCSBRK) && (!arg)) || (cmd == TCSBRKP)) - dgap_cmdw(ch, SBREAK, (u16)SBREAK_TIME, 0); - - spin_unlock_irqrestore(&ch->ch_lock, lock_flags2); - spin_unlock_irqrestore(&bd->bd_lock, lock_flags); - - return 0; - - case TCSBRKP: - /* support for POSIX tcsendbreak() - - * According to POSIX.1 spec (7.2.2.1.2) breaks should be - * between 0.25 and 0.5 seconds so we'll ask for something - * in the middle: 0.375 seconds. - */ - rc = tty_check_change(tty); - spin_unlock_irqrestore(&ch->ch_lock, lock_flags2); - spin_unlock_irqrestore(&bd->bd_lock, lock_flags); - if (rc) - return rc; - - rc = dgap_wait_for_drain(tty); - if (rc) - return -EINTR; - - spin_lock_irqsave(&bd->bd_lock, lock_flags); - spin_lock_irqsave(&ch->ch_lock, lock_flags2); - - dgap_cmdw(ch, SBREAK, (u16)SBREAK_TIME, 0); - - spin_unlock_irqrestore(&ch->ch_lock, lock_flags2); - spin_unlock_irqrestore(&bd->bd_lock, lock_flags); - - return 0; - - case TIOCSBRK: - /* - * FEP5 doesn't support turning on a break unconditionally. - * The FEP5 device will stop sending a break automatically - * after the specified time value that was sent when turning on - * the break. - */ - rc = tty_check_change(tty); - spin_unlock_irqrestore(&ch->ch_lock, lock_flags2); - spin_unlock_irqrestore(&bd->bd_lock, lock_flags); - if (rc) - return rc; - - rc = dgap_wait_for_drain(tty); - if (rc) - return -EINTR; - - spin_lock_irqsave(&bd->bd_lock, lock_flags); - spin_lock_irqsave(&ch->ch_lock, lock_flags2); - - dgap_cmdw(ch, SBREAK, (u16)SBREAK_TIME, 0); - - spin_unlock_irqrestore(&ch->ch_lock, lock_flags2); - spin_unlock_irqrestore(&bd->bd_lock, lock_flags); - - return 0; - - case TIOCCBRK: - /* - * FEP5 doesn't support turning off a break unconditionally. - * The FEP5 device will stop sending a break automatically - * after the specified time value that was sent when turning on - * the break. - */ - spin_unlock_irqrestore(&ch->ch_lock, lock_flags2); - spin_unlock_irqrestore(&bd->bd_lock, lock_flags); - return 0; - - case TIOCGSOFTCAR: - - spin_unlock_irqrestore(&ch->ch_lock, lock_flags2); - spin_unlock_irqrestore(&bd->bd_lock, lock_flags); - - return put_user(C_CLOCAL(tty) ? 1 : 0, - (unsigned long __user *)arg); - - case TIOCSSOFTCAR: - spin_unlock_irqrestore(&ch->ch_lock, lock_flags2); - spin_unlock_irqrestore(&bd->bd_lock, lock_flags); - - rc = get_user(arg, (unsigned long __user *)arg); - if (rc) - return rc; - - spin_lock_irqsave(&bd->bd_lock, lock_flags); - spin_lock_irqsave(&ch->ch_lock, lock_flags2); - tty->termios.c_cflag = ((tty->termios.c_cflag & ~CLOCAL) | - (arg ? CLOCAL : 0)); - dgap_param(ch, bd, un->un_type); - spin_unlock_irqrestore(&ch->ch_lock, lock_flags2); - spin_unlock_irqrestore(&bd->bd_lock, lock_flags); - - return 0; - - case TIOCMGET: - spin_unlock_irqrestore(&ch->ch_lock, lock_flags2); - spin_unlock_irqrestore(&bd->bd_lock, lock_flags); - return dgap_get_modem_info(ch, uarg); - - case TIOCMBIS: - case TIOCMBIC: - case TIOCMSET: - spin_unlock_irqrestore(&ch->ch_lock, lock_flags2); - spin_unlock_irqrestore(&bd->bd_lock, lock_flags); - return dgap_set_modem_info(ch, bd, un, cmd, uarg); - - /* - * Here are any additional ioctl's that we want to implement - */ - - case TCFLSH: - /* - * The linux tty driver doesn't have a flush - * input routine for the driver, assuming all backed - * up data is in the line disc. buffers. However, - * we all know that's not the case. Here, we - * act on the ioctl, but then lie and say we didn't - * so the line discipline will process the flush - * also. - */ - rc = tty_check_change(tty); - if (rc) { - spin_unlock_irqrestore(&ch->ch_lock, lock_flags2); - spin_unlock_irqrestore(&bd->bd_lock, lock_flags); - return rc; - } - - if ((arg == TCIFLUSH) || (arg == TCIOFLUSH)) { - if (!(un->un_type == DGAP_PRINT)) { - head = readw(&ch->ch_bs->rx_head); - writew(head, &ch->ch_bs->rx_tail); - writeb(0, &ch->ch_bs->orun); - } - } - - if ((arg != TCOFLUSH) && (arg != TCIOFLUSH)) { - /* pretend we didn't recognize this IOCTL */ - spin_unlock_irqrestore(&ch->ch_lock, lock_flags2); - spin_unlock_irqrestore(&bd->bd_lock, lock_flags); - - return -ENOIOCTLCMD; - } - - ch->ch_flags &= ~CH_STOP; - head = readw(&ch->ch_bs->tx_head); - dgap_cmdw(ch, FLUSHTX, (u16)head, 0); - dgap_cmdw(ch, RESUMETX, 0, 0); - if (ch->ch_tun.un_flags & (UN_LOW | UN_EMPTY)) { - ch->ch_tun.un_flags &= ~(UN_LOW | UN_EMPTY); - wake_up_interruptible(&ch->ch_tun.un_flags_wait); - } - if (ch->ch_pun.un_flags & (UN_LOW | UN_EMPTY)) { - ch->ch_pun.un_flags &= ~(UN_LOW | UN_EMPTY); - wake_up_interruptible(&ch->ch_pun.un_flags_wait); - } - if (waitqueue_active(&tty->write_wait)) - wake_up_interruptible(&tty->write_wait); - - /* Can't hold any locks when calling tty_wakeup! */ - spin_unlock_irqrestore(&ch->ch_lock, lock_flags2); - spin_unlock_irqrestore(&bd->bd_lock, lock_flags); - tty_wakeup(tty); - - /* pretend we didn't recognize this IOCTL */ - return -ENOIOCTLCMD; - - case TCSETSF: - case TCSETSW: - /* - * The linux tty driver doesn't have a flush - * input routine for the driver, assuming all backed - * up data is in the line disc. buffers. However, - * we all know that's not the case. Here, we - * act on the ioctl, but then lie and say we didn't - * so the line discipline will process the flush - * also. - */ - if (cmd == TCSETSF) { - /* flush rx */ - ch->ch_flags &= ~CH_STOP; - head = readw(&ch->ch_bs->rx_head); - writew(head, &ch->ch_bs->rx_tail); - } - - /* now wait for all the output to drain */ - spin_unlock_irqrestore(&ch->ch_lock, lock_flags2); - spin_unlock_irqrestore(&bd->bd_lock, lock_flags); - rc = dgap_wait_for_drain(tty); - if (rc) - return -EINTR; - - /* pretend we didn't recognize this */ - return -ENOIOCTLCMD; - - case TCSETAW: - - spin_unlock_irqrestore(&ch->ch_lock, lock_flags2); - spin_unlock_irqrestore(&bd->bd_lock, lock_flags); - rc = dgap_wait_for_drain(tty); - if (rc) - return -EINTR; - - /* pretend we didn't recognize this */ - return -ENOIOCTLCMD; - - case TCXONC: - /* - * The Linux Line Discipline (LD) would do this for us if we - * let it, but we have the special firmware options to do this - * the "right way" regardless of hardware or software flow - * control so we'll do it outselves instead of letting the LD - * do it. - */ - rc = tty_check_change(tty); - if (rc) { - spin_unlock_irqrestore(&ch->ch_lock, lock_flags2); - spin_unlock_irqrestore(&bd->bd_lock, lock_flags); - return rc; - } - - switch (arg) { - case TCOON: - spin_unlock_irqrestore(&ch->ch_lock, lock_flags2); - spin_unlock_irqrestore(&bd->bd_lock, lock_flags); - dgap_tty_start(tty); - return 0; - case TCOOFF: - spin_unlock_irqrestore(&ch->ch_lock, lock_flags2); - spin_unlock_irqrestore(&bd->bd_lock, lock_flags); - dgap_tty_stop(tty); - return 0; - case TCION: - spin_unlock_irqrestore(&ch->ch_lock, lock_flags2); - spin_unlock_irqrestore(&bd->bd_lock, lock_flags); - /* Make the ld do it */ - return -ENOIOCTLCMD; - case TCIOFF: - spin_unlock_irqrestore(&ch->ch_lock, lock_flags2); - spin_unlock_irqrestore(&bd->bd_lock, lock_flags); - /* Make the ld do it */ - return -ENOIOCTLCMD; - default: - spin_unlock_irqrestore(&ch->ch_lock, lock_flags2); - spin_unlock_irqrestore(&bd->bd_lock, lock_flags); - return -EINVAL; - } - - case DIGI_GETA: - /* get information for ditty */ - spin_unlock_irqrestore(&ch->ch_lock, lock_flags2); - spin_unlock_irqrestore(&bd->bd_lock, lock_flags); - return dgap_tty_digigeta(ch, uarg); - - case DIGI_SETAW: - case DIGI_SETAF: - - /* set information for ditty */ - if (cmd == (DIGI_SETAW)) { - spin_unlock_irqrestore(&ch->ch_lock, lock_flags2); - spin_unlock_irqrestore(&bd->bd_lock, lock_flags); - rc = dgap_wait_for_drain(tty); - if (rc) - return -EINTR; - spin_lock_irqsave(&bd->bd_lock, lock_flags); - spin_lock_irqsave(&ch->ch_lock, lock_flags2); - } else - tty_ldisc_flush(tty); - /* fall thru */ - - case DIGI_SETA: - spin_unlock_irqrestore(&ch->ch_lock, lock_flags2); - spin_unlock_irqrestore(&bd->bd_lock, lock_flags); - return dgap_tty_digiseta(ch, bd, un, uarg); - - case DIGI_GEDELAY: - spin_unlock_irqrestore(&ch->ch_lock, lock_flags2); - spin_unlock_irqrestore(&bd->bd_lock, lock_flags); - return dgap_tty_digigetedelay(tty, uarg); - - case DIGI_SEDELAY: - spin_unlock_irqrestore(&ch->ch_lock, lock_flags2); - spin_unlock_irqrestore(&bd->bd_lock, lock_flags); - return dgap_tty_digisetedelay(ch, bd, un, uarg); - - case DIGI_GETCUSTOMBAUD: - spin_unlock_irqrestore(&ch->ch_lock, lock_flags2); - spin_unlock_irqrestore(&bd->bd_lock, lock_flags); - return dgap_tty_digigetcustombaud(ch, un, uarg); - - case DIGI_SETCUSTOMBAUD: - spin_unlock_irqrestore(&ch->ch_lock, lock_flags2); - spin_unlock_irqrestore(&bd->bd_lock, lock_flags); - return dgap_tty_digisetcustombaud(ch, bd, un, uarg); - - case DIGI_RESET_PORT: - dgap_firmware_reset_port(ch); - dgap_param(ch, bd, un->un_type); - spin_unlock_irqrestore(&ch->ch_lock, lock_flags2); - spin_unlock_irqrestore(&bd->bd_lock, lock_flags); - return 0; - - default: - spin_unlock_irqrestore(&ch->ch_lock, lock_flags2); - spin_unlock_irqrestore(&bd->bd_lock, lock_flags); - - return -ENOIOCTLCMD; - } -} - -static const struct tty_operations dgap_tty_ops = { - .open = dgap_tty_open, - .close = dgap_tty_close, - .write = dgap_tty_write, - .write_room = dgap_tty_write_room, - .flush_buffer = dgap_tty_flush_buffer, - .chars_in_buffer = dgap_tty_chars_in_buffer, - .flush_chars = dgap_tty_flush_chars, - .ioctl = dgap_tty_ioctl, - .set_termios = dgap_tty_set_termios, - .stop = dgap_tty_stop, - .start = dgap_tty_start, - .throttle = dgap_tty_throttle, - .unthrottle = dgap_tty_unthrottle, - .hangup = dgap_tty_hangup, - .put_char = dgap_tty_put_char, - .tiocmget = dgap_tty_tiocmget, - .tiocmset = dgap_tty_tiocmset, - .break_ctl = dgap_tty_send_break, - .wait_until_sent = dgap_tty_wait_until_sent, - .send_xchar = dgap_tty_send_xchar -}; - -/************************************************************************ - * - * TTY Initialization/Cleanup Functions - * - ************************************************************************/ - -/* - * dgap_tty_register() - * - * Init the tty subsystem for this board. - */ -static int dgap_tty_register(struct board_t *brd) -{ - int rc; - - brd->serial_driver = tty_alloc_driver(MAXPORTS, - TTY_DRIVER_REAL_RAW | - TTY_DRIVER_DYNAMIC_DEV | - TTY_DRIVER_HARDWARE_BREAK); - if (IS_ERR(brd->serial_driver)) - return PTR_ERR(brd->serial_driver); - - snprintf(brd->serial_name, MAXTTYNAMELEN, "tty_dgap_%d_", - brd->boardnum); - brd->serial_driver->name = brd->serial_name; - brd->serial_driver->name_base = 0; - brd->serial_driver->major = 0; - brd->serial_driver->minor_start = 0; - brd->serial_driver->type = TTY_DRIVER_TYPE_SERIAL; - brd->serial_driver->subtype = SERIAL_TYPE_NORMAL; - brd->serial_driver->init_termios = dgap_default_termios; - brd->serial_driver->driver_name = DRVSTR; - - /* - * Entry points for driver. Called by the kernel from - * tty_io.c and n_tty.c. - */ - tty_set_operations(brd->serial_driver, &dgap_tty_ops); - - /* - * If we're doing transparent print, we have to do all of the above - * again, separately so we don't get the LD confused about what major - * we are when we get into the dgap_tty_open() routine. - */ - brd->print_driver = tty_alloc_driver(MAXPORTS, - TTY_DRIVER_REAL_RAW | - TTY_DRIVER_DYNAMIC_DEV | - TTY_DRIVER_HARDWARE_BREAK); - if (IS_ERR(brd->print_driver)) { - rc = PTR_ERR(brd->print_driver); - goto free_serial_drv; - } - - snprintf(brd->print_name, MAXTTYNAMELEN, "pr_dgap_%d_", - brd->boardnum); - brd->print_driver->name = brd->print_name; - brd->print_driver->name_base = 0; - brd->print_driver->major = 0; - brd->print_driver->minor_start = 0; - brd->print_driver->type = TTY_DRIVER_TYPE_SERIAL; - brd->print_driver->subtype = SERIAL_TYPE_NORMAL; - brd->print_driver->init_termios = dgap_default_termios; - brd->print_driver->driver_name = DRVSTR; - - /* - * Entry points for driver. Called by the kernel from - * tty_io.c and n_tty.c. - */ - tty_set_operations(brd->print_driver, &dgap_tty_ops); - - /* Register tty devices */ - rc = tty_register_driver(brd->serial_driver); - if (rc < 0) - goto free_print_drv; - - /* Register Transparent Print devices */ - rc = tty_register_driver(brd->print_driver); - if (rc < 0) - goto unregister_serial_drv; - - return 0; - -unregister_serial_drv: - tty_unregister_driver(brd->serial_driver); -free_print_drv: - put_tty_driver(brd->print_driver); -free_serial_drv: - put_tty_driver(brd->serial_driver); - - return rc; -} - -static void dgap_tty_unregister(struct board_t *brd) -{ - tty_unregister_driver(brd->print_driver); - tty_unregister_driver(brd->serial_driver); - put_tty_driver(brd->print_driver); - put_tty_driver(brd->serial_driver); -} - -static int dgap_alloc_flipbuf(struct board_t *brd) -{ - /* - * allocate flip buffer for board. - */ - brd->flipbuf = kmalloc(MYFLIPLEN, GFP_KERNEL); - if (!brd->flipbuf) - return -ENOMEM; - - brd->flipflagbuf = kmalloc(MYFLIPLEN, GFP_KERNEL); - if (!brd->flipflagbuf) { - kfree(brd->flipbuf); - return -ENOMEM; - } - - return 0; -} - -static void dgap_free_flipbuf(struct board_t *brd) -{ - kfree(brd->flipbuf); - kfree(brd->flipflagbuf); -} - -static struct board_t *dgap_verify_board(struct device *p) -{ - struct board_t *bd; - - if (!p) - return NULL; - - bd = dev_get_drvdata(p); - if (!bd || bd->magic != DGAP_BOARD_MAGIC || bd->state != BOARD_READY) - return NULL; - - return bd; -} - -static ssize_t dgap_ports_state_show(struct device *p, - struct device_attribute *attr, - char *buf) -{ - struct board_t *bd; - int count = 0; - unsigned int i; - - bd = dgap_verify_board(p); - if (!bd) - return 0; - - for (i = 0; i < bd->nasync; i++) { - count += snprintf(buf + count, PAGE_SIZE - count, - "%d %s\n", bd->channels[i]->ch_portnum, - bd->channels[i]->ch_open_count ? "Open" : "Closed"); - } - return count; -} -static DEVICE_ATTR(ports_state, S_IRUSR, dgap_ports_state_show, NULL); - -static ssize_t dgap_ports_baud_show(struct device *p, - struct device_attribute *attr, - char *buf) -{ - struct board_t *bd; - int count = 0; - unsigned int i; - - bd = dgap_verify_board(p); - if (!bd) - return 0; - - for (i = 0; i < bd->nasync; i++) { - count += snprintf(buf + count, PAGE_SIZE - count, "%d %d\n", - bd->channels[i]->ch_portnum, - bd->channels[i]->ch_baud_info); - } - return count; -} -static DEVICE_ATTR(ports_baud, S_IRUSR, dgap_ports_baud_show, NULL); - -static ssize_t dgap_ports_msignals_show(struct device *p, - struct device_attribute *attr, - char *buf) -{ - struct board_t *bd; - int count = 0; - unsigned int i; - - bd = dgap_verify_board(p); - if (!bd) - return 0; - - for (i = 0; i < bd->nasync; i++) { - if (bd->channels[i]->ch_open_count) - count += snprintf(buf + count, PAGE_SIZE - count, - "%d %s %s %s %s %s %s\n", - bd->channels[i]->ch_portnum, - (bd->channels[i]->ch_mostat & - UART_MCR_RTS) ? "RTS" : "", - (bd->channels[i]->ch_mistat & - UART_MSR_CTS) ? "CTS" : "", - (bd->channels[i]->ch_mostat & - UART_MCR_DTR) ? "DTR" : "", - (bd->channels[i]->ch_mistat & - UART_MSR_DSR) ? "DSR" : "", - (bd->channels[i]->ch_mistat & - UART_MSR_DCD) ? "DCD" : "", - (bd->channels[i]->ch_mistat & - UART_MSR_RI) ? "RI" : ""); - else - count += snprintf(buf + count, PAGE_SIZE - count, - "%d\n", bd->channels[i]->ch_portnum); - } - return count; -} -static DEVICE_ATTR(ports_msignals, S_IRUSR, dgap_ports_msignals_show, NULL); - -static ssize_t dgap_ports_iflag_show(struct device *p, - struct device_attribute *attr, - char *buf) -{ - struct board_t *bd; - int count = 0; - unsigned int i; - - bd = dgap_verify_board(p); - if (!bd) - return 0; - - for (i = 0; i < bd->nasync; i++) - count += snprintf(buf + count, PAGE_SIZE - count, "%d %x\n", - bd->channels[i]->ch_portnum, - bd->channels[i]->ch_c_iflag); - return count; -} -static DEVICE_ATTR(ports_iflag, S_IRUSR, dgap_ports_iflag_show, NULL); - -static ssize_t dgap_ports_cflag_show(struct device *p, - struct device_attribute *attr, - char *buf) -{ - struct board_t *bd; - int count = 0; - unsigned int i; - - bd = dgap_verify_board(p); - if (!bd) - return 0; - - for (i = 0; i < bd->nasync; i++) - count += snprintf(buf + count, PAGE_SIZE - count, "%d %x\n", - bd->channels[i]->ch_portnum, - bd->channels[i]->ch_c_cflag); - return count; -} -static DEVICE_ATTR(ports_cflag, S_IRUSR, dgap_ports_cflag_show, NULL); - -static ssize_t dgap_ports_oflag_show(struct device *p, - struct device_attribute *attr, - char *buf) -{ - struct board_t *bd; - int count = 0; - unsigned int i; - - bd = dgap_verify_board(p); - if (!bd) - return 0; - - for (i = 0; i < bd->nasync; i++) - count += snprintf(buf + count, PAGE_SIZE - count, "%d %x\n", - bd->channels[i]->ch_portnum, - bd->channels[i]->ch_c_oflag); - return count; -} -static DEVICE_ATTR(ports_oflag, S_IRUSR, dgap_ports_oflag_show, NULL); - -static ssize_t dgap_ports_lflag_show(struct device *p, - struct device_attribute *attr, - char *buf) -{ - struct board_t *bd; - int count = 0; - unsigned int i; - - bd = dgap_verify_board(p); - if (!bd) - return 0; - - for (i = 0; i < bd->nasync; i++) - count += snprintf(buf + count, PAGE_SIZE - count, "%d %x\n", - bd->channels[i]->ch_portnum, - bd->channels[i]->ch_c_lflag); - return count; -} -static DEVICE_ATTR(ports_lflag, S_IRUSR, dgap_ports_lflag_show, NULL); - -static ssize_t dgap_ports_digi_flag_show(struct device *p, - struct device_attribute *attr, - char *buf) -{ - struct board_t *bd; - int count = 0; - unsigned int i; - - bd = dgap_verify_board(p); - if (!bd) - return 0; - - for (i = 0; i < bd->nasync; i++) - count += snprintf(buf + count, PAGE_SIZE - count, "%d %x\n", - bd->channels[i]->ch_portnum, - bd->channels[i]->ch_digi.digi_flags); - return count; -} -static DEVICE_ATTR(ports_digi_flag, S_IRUSR, dgap_ports_digi_flag_show, NULL); - -static ssize_t dgap_ports_rxcount_show(struct device *p, - struct device_attribute *attr, - char *buf) -{ - struct board_t *bd; - int count = 0; - unsigned int i; - - bd = dgap_verify_board(p); - if (!bd) - return 0; - - for (i = 0; i < bd->nasync; i++) - count += snprintf(buf + count, PAGE_SIZE - count, "%d %ld\n", - bd->channels[i]->ch_portnum, - bd->channels[i]->ch_rxcount); - return count; -} -static DEVICE_ATTR(ports_rxcount, S_IRUSR, dgap_ports_rxcount_show, NULL); - -static ssize_t dgap_ports_txcount_show(struct device *p, - struct device_attribute *attr, - char *buf) -{ - struct board_t *bd; - int count = 0; - unsigned int i; - - bd = dgap_verify_board(p); - if (!bd) - return 0; - - for (i = 0; i < bd->nasync; i++) - count += snprintf(buf + count, PAGE_SIZE - count, "%d %ld\n", - bd->channels[i]->ch_portnum, - bd->channels[i]->ch_txcount); - return count; -} -static DEVICE_ATTR(ports_txcount, S_IRUSR, dgap_ports_txcount_show, NULL); - -static ssize_t dgap_tty_state_show(struct device *d, - struct device_attribute *attr, - char *buf) -{ - struct board_t *bd; - struct channel_t *ch; - struct un_t *un; - - if (!d) - return 0; - un = dev_get_drvdata(d); - if (!un || un->magic != DGAP_UNIT_MAGIC) - return 0; - ch = un->un_ch; - if (!ch || ch->magic != DGAP_CHANNEL_MAGIC) - return 0; - bd = ch->ch_bd; - if (!bd || bd->magic != DGAP_BOARD_MAGIC) - return 0; - if (bd->state != BOARD_READY) - return 0; - - return snprintf(buf, PAGE_SIZE, "%s", un->un_open_count ? - "Open" : "Closed"); -} -static DEVICE_ATTR(state, S_IRUSR, dgap_tty_state_show, NULL); - -static ssize_t dgap_tty_baud_show(struct device *d, - struct device_attribute *attr, - char *buf) -{ - struct board_t *bd; - struct channel_t *ch; - struct un_t *un; - - if (!d) - return 0; - un = dev_get_drvdata(d); - if (!un || un->magic != DGAP_UNIT_MAGIC) - return 0; - ch = un->un_ch; - if (!ch || ch->magic != DGAP_CHANNEL_MAGIC) - return 0; - bd = ch->ch_bd; - if (!bd || bd->magic != DGAP_BOARD_MAGIC) - return 0; - if (bd->state != BOARD_READY) - return 0; - - return snprintf(buf, PAGE_SIZE, "%d\n", ch->ch_baud_info); -} -static DEVICE_ATTR(baud, S_IRUSR, dgap_tty_baud_show, NULL); - -static ssize_t dgap_tty_msignals_show(struct device *d, - struct device_attribute *attr, - char *buf) -{ - struct board_t *bd; - struct channel_t *ch; - struct un_t *un; - - if (!d) - return 0; - un = dev_get_drvdata(d); - if (!un || un->magic != DGAP_UNIT_MAGIC) - return 0; - ch = un->un_ch; - if (!ch || ch->magic != DGAP_CHANNEL_MAGIC) - return 0; - bd = ch->ch_bd; - if (!bd || bd->magic != DGAP_BOARD_MAGIC) - return 0; - if (bd->state != BOARD_READY) - return 0; - - if (ch->ch_open_count) { - return snprintf(buf, PAGE_SIZE, "%s %s %s %s %s %s\n", - (ch->ch_mostat & UART_MCR_RTS) ? "RTS" : "", - (ch->ch_mistat & UART_MSR_CTS) ? "CTS" : "", - (ch->ch_mostat & UART_MCR_DTR) ? "DTR" : "", - (ch->ch_mistat & UART_MSR_DSR) ? "DSR" : "", - (ch->ch_mistat & UART_MSR_DCD) ? "DCD" : "", - (ch->ch_mistat & UART_MSR_RI) ? "RI" : ""); - } - return 0; -} -static DEVICE_ATTR(msignals, S_IRUSR, dgap_tty_msignals_show, NULL); - -static ssize_t dgap_tty_iflag_show(struct device *d, - struct device_attribute *attr, - char *buf) -{ - struct board_t *bd; - struct channel_t *ch; - struct un_t *un; - - if (!d) - return 0; - un = dev_get_drvdata(d); - if (!un || un->magic != DGAP_UNIT_MAGIC) - return 0; - ch = un->un_ch; - if (!ch || ch->magic != DGAP_CHANNEL_MAGIC) - return 0; - bd = ch->ch_bd; - if (!bd || bd->magic != DGAP_BOARD_MAGIC) - return 0; - if (bd->state != BOARD_READY) - return 0; - - return snprintf(buf, PAGE_SIZE, "%x\n", ch->ch_c_iflag); -} -static DEVICE_ATTR(iflag, S_IRUSR, dgap_tty_iflag_show, NULL); - -static ssize_t dgap_tty_cflag_show(struct device *d, - struct device_attribute *attr, - char *buf) -{ - struct board_t *bd; - struct channel_t *ch; - struct un_t *un; - - if (!d) - return 0; - un = dev_get_drvdata(d); - if (!un || un->magic != DGAP_UNIT_MAGIC) - return 0; - ch = un->un_ch; - if (!ch || ch->magic != DGAP_CHANNEL_MAGIC) - return 0; - bd = ch->ch_bd; - if (!bd || bd->magic != DGAP_BOARD_MAGIC) - return 0; - if (bd->state != BOARD_READY) - return 0; - - return snprintf(buf, PAGE_SIZE, "%x\n", ch->ch_c_cflag); -} -static DEVICE_ATTR(cflag, S_IRUSR, dgap_tty_cflag_show, NULL); - -static ssize_t dgap_tty_oflag_show(struct device *d, - struct device_attribute *attr, - char *buf) -{ - struct board_t *bd; - struct channel_t *ch; - struct un_t *un; - - if (!d) - return 0; - un = dev_get_drvdata(d); - if (!un || un->magic != DGAP_UNIT_MAGIC) - return 0; - ch = un->un_ch; - if (!ch || ch->magic != DGAP_CHANNEL_MAGIC) - return 0; - bd = ch->ch_bd; - if (!bd || bd->magic != DGAP_BOARD_MAGIC) - return 0; - if (bd->state != BOARD_READY) - return 0; - - return snprintf(buf, PAGE_SIZE, "%x\n", ch->ch_c_oflag); -} -static DEVICE_ATTR(oflag, S_IRUSR, dgap_tty_oflag_show, NULL); - -static ssize_t dgap_tty_lflag_show(struct device *d, - struct device_attribute *attr, - char *buf) -{ - struct board_t *bd; - struct channel_t *ch; - struct un_t *un; - - if (!d) - return 0; - un = dev_get_drvdata(d); - if (!un || un->magic != DGAP_UNIT_MAGIC) - return 0; - ch = un->un_ch; - if (!ch || ch->magic != DGAP_CHANNEL_MAGIC) - return 0; - bd = ch->ch_bd; - if (!bd || bd->magic != DGAP_BOARD_MAGIC) - return 0; - if (bd->state != BOARD_READY) - return 0; - - return snprintf(buf, PAGE_SIZE, "%x\n", ch->ch_c_lflag); -} -static DEVICE_ATTR(lflag, S_IRUSR, dgap_tty_lflag_show, NULL); - -static ssize_t dgap_tty_digi_flag_show(struct device *d, - struct device_attribute *attr, - char *buf) -{ - struct board_t *bd; - struct channel_t *ch; - struct un_t *un; - - if (!d) - return 0; - un = dev_get_drvdata(d); - if (!un || un->magic != DGAP_UNIT_MAGIC) - return 0; - ch = un->un_ch; - if (!ch || ch->magic != DGAP_CHANNEL_MAGIC) - return 0; - bd = ch->ch_bd; - if (!bd || bd->magic != DGAP_BOARD_MAGIC) - return 0; - if (bd->state != BOARD_READY) - return 0; - - return snprintf(buf, PAGE_SIZE, "%x\n", ch->ch_digi.digi_flags); -} -static DEVICE_ATTR(digi_flag, S_IRUSR, dgap_tty_digi_flag_show, NULL); - -static ssize_t dgap_tty_rxcount_show(struct device *d, - struct device_attribute *attr, - char *buf) -{ - struct board_t *bd; - struct channel_t *ch; - struct un_t *un; - - if (!d) - return 0; - un = dev_get_drvdata(d); - if (!un || un->magic != DGAP_UNIT_MAGIC) - return 0; - ch = un->un_ch; - if (!ch || ch->magic != DGAP_CHANNEL_MAGIC) - return 0; - bd = ch->ch_bd; - if (!bd || bd->magic != DGAP_BOARD_MAGIC) - return 0; - if (bd->state != BOARD_READY) - return 0; - - return snprintf(buf, PAGE_SIZE, "%ld\n", ch->ch_rxcount); -} -static DEVICE_ATTR(rxcount, S_IRUSR, dgap_tty_rxcount_show, NULL); - -static ssize_t dgap_tty_txcount_show(struct device *d, - struct device_attribute *attr, - char *buf) -{ - struct board_t *bd; - struct channel_t *ch; - struct un_t *un; - - if (!d) - return 0; - un = dev_get_drvdata(d); - if (!un || un->magic != DGAP_UNIT_MAGIC) - return 0; - ch = un->un_ch; - if (!ch || ch->magic != DGAP_CHANNEL_MAGIC) - return 0; - bd = ch->ch_bd; - if (!bd || bd->magic != DGAP_BOARD_MAGIC) - return 0; - if (bd->state != BOARD_READY) - return 0; - - return snprintf(buf, PAGE_SIZE, "%ld\n", ch->ch_txcount); -} -static DEVICE_ATTR(txcount, S_IRUSR, dgap_tty_txcount_show, NULL); - -static ssize_t dgap_tty_name_show(struct device *d, - struct device_attribute *attr, - char *buf) -{ - struct board_t *bd; - struct channel_t *ch; - struct un_t *un; - int cn; - int bn; - struct cnode *cptr; - int found = FALSE; - int ncount = 0; - int starto = 0; - int i; - - if (!d) - return 0; - un = dev_get_drvdata(d); - if (!un || un->magic != DGAP_UNIT_MAGIC) - return 0; - ch = un->un_ch; - if (!ch || ch->magic != DGAP_CHANNEL_MAGIC) - return 0; - bd = ch->ch_bd; - if (!bd || bd->magic != DGAP_BOARD_MAGIC) - return 0; - if (bd->state != BOARD_READY) - return 0; - - bn = bd->boardnum; - cn = ch->ch_portnum; - - for (cptr = bd->bd_config; cptr; cptr = cptr->next) { - if ((cptr->type == BNODE) && - ((cptr->u.board.type == APORT2_920P) || - (cptr->u.board.type == APORT4_920P) || - (cptr->u.board.type == APORT8_920P) || - (cptr->u.board.type == PAPORT4) || - (cptr->u.board.type == PAPORT8))) { - found = TRUE; - if (cptr->u.board.v_start) - starto = cptr->u.board.start; - else - starto = 1; - } - - if (cptr->type == TNODE && found == TRUE) { - char *ptr1; - - if (strstr(cptr->u.ttyname, "tty")) { - ptr1 = cptr->u.ttyname; - ptr1 += 3; - } else - ptr1 = cptr->u.ttyname; - - for (i = 0; i < dgap_config_get_num_prts(bd); i++) { - if (cn != i) - continue; - - return snprintf(buf, PAGE_SIZE, "%s%s%02d\n", - (un->un_type == DGAP_PRINT) ? - "pr" : "tty", - ptr1, i + starto); - } - } - - if (cptr->type == CNODE) { - for (i = 0; i < cptr->u.conc.nport; i++) { - if (cn != (i + ncount)) - continue; - - return snprintf(buf, PAGE_SIZE, "%s%s%02ld\n", - (un->un_type == DGAP_PRINT) ? - "pr" : "tty", - cptr->u.conc.id, - i + (cptr->u.conc.v_start ? - cptr->u.conc.start : 1)); - } - - ncount += cptr->u.conc.nport; - } - - if (cptr->type == MNODE) { - for (i = 0; i < cptr->u.module.nport; i++) { - if (cn != (i + ncount)) - continue; - - return snprintf(buf, PAGE_SIZE, "%s%s%02ld\n", - (un->un_type == DGAP_PRINT) ? - "pr" : "tty", - cptr->u.module.id, - i + (cptr->u.module.v_start ? - cptr->u.module.start : 1)); - } - - ncount += cptr->u.module.nport; - } - } - - return snprintf(buf, PAGE_SIZE, "%s_dgap_%d_%d\n", - (un->un_type == DGAP_PRINT) ? "pr" : "tty", bn, cn); -} -static DEVICE_ATTR(custom_name, S_IRUSR, dgap_tty_name_show, NULL); - -static struct attribute *dgap_sysfs_tty_entries[] = { - &dev_attr_state.attr, - &dev_attr_baud.attr, - &dev_attr_msignals.attr, - &dev_attr_iflag.attr, - &dev_attr_cflag.attr, - &dev_attr_oflag.attr, - &dev_attr_lflag.attr, - &dev_attr_digi_flag.attr, - &dev_attr_rxcount.attr, - &dev_attr_txcount.attr, - &dev_attr_custom_name.attr, - NULL -}; - - -/* this function creates the sys files that will export each signal status - * to sysfs each value will be put in a separate filename - */ -static void dgap_create_ports_sysfiles(struct board_t *bd) -{ - dev_set_drvdata(&bd->pdev->dev, bd); - device_create_file(&bd->pdev->dev, &dev_attr_ports_state); - device_create_file(&bd->pdev->dev, &dev_attr_ports_baud); - device_create_file(&bd->pdev->dev, &dev_attr_ports_msignals); - device_create_file(&bd->pdev->dev, &dev_attr_ports_iflag); - device_create_file(&bd->pdev->dev, &dev_attr_ports_cflag); - device_create_file(&bd->pdev->dev, &dev_attr_ports_oflag); - device_create_file(&bd->pdev->dev, &dev_attr_ports_lflag); - device_create_file(&bd->pdev->dev, &dev_attr_ports_digi_flag); - device_create_file(&bd->pdev->dev, &dev_attr_ports_rxcount); - device_create_file(&bd->pdev->dev, &dev_attr_ports_txcount); -} - -/* removes all the sys files created for that port */ -static void dgap_remove_ports_sysfiles(struct board_t *bd) -{ - device_remove_file(&bd->pdev->dev, &dev_attr_ports_state); - device_remove_file(&bd->pdev->dev, &dev_attr_ports_baud); - device_remove_file(&bd->pdev->dev, &dev_attr_ports_msignals); - device_remove_file(&bd->pdev->dev, &dev_attr_ports_iflag); - device_remove_file(&bd->pdev->dev, &dev_attr_ports_cflag); - device_remove_file(&bd->pdev->dev, &dev_attr_ports_oflag); - device_remove_file(&bd->pdev->dev, &dev_attr_ports_lflag); - device_remove_file(&bd->pdev->dev, &dev_attr_ports_digi_flag); - device_remove_file(&bd->pdev->dev, &dev_attr_ports_rxcount); - device_remove_file(&bd->pdev->dev, &dev_attr_ports_txcount); -} - -/* - * Copies the BIOS code from the user to the board, - * and starts the BIOS running. - */ -static void dgap_do_bios_load(struct board_t *brd, const u8 *ubios, int len) -{ - u8 __iomem *addr; - uint offset; - unsigned int i; - - if (!brd || (brd->magic != DGAP_BOARD_MAGIC) || !brd->re_map_membase) - return; - - addr = brd->re_map_membase; - - /* - * clear POST area - */ - for (i = 0; i < 16; i++) - writeb(0, addr + POSTAREA + i); - - /* - * Download bios - */ - offset = 0x1000; - memcpy_toio(addr + offset, ubios, len); - - writel(0x0bf00401, addr); - writel(0, (addr + 4)); - - /* Clear the reset, and change states. */ - writeb(FEPCLR, brd->re_map_port); -} - -/* - * Checks to see if the BIOS completed running on the card. - */ -static int dgap_test_bios(struct board_t *brd) -{ - u8 __iomem *addr; - u16 word; - u16 err1; - u16 err2; - - if (!brd || (brd->magic != DGAP_BOARD_MAGIC) || !brd->re_map_membase) - return -EINVAL; - - addr = brd->re_map_membase; - word = readw(addr + POSTAREA); - - /* - * It can take 5-6 seconds for a board to - * pass the bios self test and post results. - * Give it 10 seconds. - */ - brd->wait_for_bios = 0; - while (brd->wait_for_bios < 1000) { - /* Check to see if BIOS thinks board is good. (GD). */ - if (word == *(u16 *)"GD") - return 0; - msleep_interruptible(10); - brd->wait_for_bios++; - word = readw(addr + POSTAREA); - } - - /* Gave up on board after too long of time taken */ - err1 = readw(addr + SEQUENCE); - err2 = readw(addr + ERROR); - dev_warn(&brd->pdev->dev, "%s failed diagnostics. Error #(%x,%x).\n", - brd->name, err1, err2); - brd->state = BOARD_FAILED; - brd->dpastatus = BD_NOBIOS; - - return -EIO; -} - -/* - * Copies the FEP code from the user to the board, - * and starts the FEP running. - */ -static void dgap_do_fep_load(struct board_t *brd, const u8 *ufep, int len) -{ - u8 __iomem *addr; - uint offset; - - if (!brd || (brd->magic != DGAP_BOARD_MAGIC) || !brd->re_map_membase) - return; - - addr = brd->re_map_membase; - - /* - * Download FEP - */ - offset = 0x1000; - memcpy_toio(addr + offset, ufep, len); - - /* - * If board is a concentrator product, we need to give - * it its config string describing how the concentrators look. - */ - if ((brd->type == PCX) || (brd->type == PEPC)) { - u8 string[100]; - u8 __iomem *config; - u8 *xconfig; - unsigned int i = 0; - - xconfig = dgap_create_config_string(brd, string); - - /* Write string to board memory */ - config = addr + CONFIG; - for (; i < CONFIGSIZE; i++, config++, xconfig++) { - writeb(*xconfig, config); - if ((*xconfig & 0xff) == 0xff) - break; - } - } - - writel(0xbfc01004, (addr + 0xc34)); - writel(0x3, (addr + 0xc30)); -} - -/* - * Waits for the FEP to report thats its ready for us to use. - */ -static int dgap_test_fep(struct board_t *brd) -{ - u8 __iomem *addr; - u16 word; - u16 err1; - u16 err2; - - if (!brd || (brd->magic != DGAP_BOARD_MAGIC) || !brd->re_map_membase) - return -EINVAL; - - addr = brd->re_map_membase; - word = readw(addr + FEPSTAT); - - /* - * It can take 2-3 seconds for the FEP to - * be up and running. Give it 5 secs. - */ - brd->wait_for_fep = 0; - while (brd->wait_for_fep < 500) { - /* Check to see if FEP is up and running now. */ - if (word == *(u16 *)"OS") { - /* - * Check to see if the board can support FEP5+ commands. - */ - word = readw(addr + FEP5_PLUS); - if (word == *(u16 *)"5A") - brd->bd_flags |= BD_FEP5PLUS; - - return 0; - } - msleep_interruptible(10); - brd->wait_for_fep++; - word = readw(addr + FEPSTAT); - } - - /* Gave up on board after too long of time taken */ - err1 = readw(addr + SEQUENCE); - err2 = readw(addr + ERROR); - dev_warn(&brd->pdev->dev, - "FEPOS for %s not functioning. Error #(%x,%x).\n", - brd->name, err1, err2); - brd->state = BOARD_FAILED; - brd->dpastatus = BD_NOFEP; - - return -EIO; -} - -/* - * Physically forces the FEP5 card to reset itself. - */ -static void dgap_do_reset_board(struct board_t *brd) -{ - u8 check; - u32 check1; - u32 check2; - unsigned int i; - - if (!brd || (brd->magic != DGAP_BOARD_MAGIC) || - !brd->re_map_membase || !brd->re_map_port) - return; - - /* FEPRST does not vary among supported boards */ - writeb(FEPRST, brd->re_map_port); - - for (i = 0; i <= 1000; i++) { - check = readb(brd->re_map_port) & 0xe; - if (check == FEPRST) - break; - udelay(10); - } - if (i > 1000) { - dev_warn(&brd->pdev->dev, - "dgap: Board not resetting... Failing board.\n"); - brd->state = BOARD_FAILED; - brd->dpastatus = BD_NOFEP; - return; - } - - /* - * Make sure there really is memory out there. - */ - writel(0xa55a3cc3, (brd->re_map_membase + LOWMEM)); - writel(0x5aa5c33c, (brd->re_map_membase + HIGHMEM)); - check1 = readl(brd->re_map_membase + LOWMEM); - check2 = readl(brd->re_map_membase + HIGHMEM); - - if ((check1 != 0xa55a3cc3) || (check2 != 0x5aa5c33c)) { - dev_warn(&brd->pdev->dev, - "No memory at %p for board.\n", - brd->re_map_membase); - brd->state = BOARD_FAILED; - brd->dpastatus = BD_NOFEP; - return; - } -} - -#ifdef DIGI_CONCENTRATORS_SUPPORTED -/* - * Sends a concentrator image into the FEP5 board. - */ -static void dgap_do_conc_load(struct board_t *brd, u8 *uaddr, int len) -{ - char __iomem *vaddr; - u16 offset; - struct downld_t *to_dp; - - if (!brd || (brd->magic != DGAP_BOARD_MAGIC) || !brd->re_map_membase) - return; - - vaddr = brd->re_map_membase; - - offset = readw((u16 *)(vaddr + DOWNREQ)); - to_dp = (struct downld_t *)(vaddr + (int)offset); - memcpy_toio(to_dp, uaddr, len); - - /* Tell card we have data for it */ - writew(0, vaddr + (DOWNREQ)); - - brd->conc_dl_status = NO_PENDING_CONCENTRATOR_REQUESTS; -} -#endif - -#define EXPANSION_ROM_SIZE (64 * 1024) -#define FEP5_ROM_MAGIC (0xFEFFFFFF) - -static void dgap_get_vpd(struct board_t *brd) -{ - u32 magic; - u32 base_offset; - u16 rom_offset; - u16 vpd_offset; - u16 image_length; - u16 i; - u8 byte1; - u8 byte2; - - /* - * Poke the magic number at the PCI Rom Address location. - * If VPD is supported, the value read from that address - * will be non-zero. - */ - magic = FEP5_ROM_MAGIC; - pci_write_config_dword(brd->pdev, PCI_ROM_ADDRESS, magic); - pci_read_config_dword(brd->pdev, PCI_ROM_ADDRESS, &magic); - - /* VPD not supported, bail */ - if (!magic) - return; - - /* - * To get to the OTPROM memory, we have to send the boards base - * address or'ed with 1 into the PCI Rom Address location. - */ - magic = brd->membase | 0x01; - pci_write_config_dword(brd->pdev, PCI_ROM_ADDRESS, magic); - pci_read_config_dword(brd->pdev, PCI_ROM_ADDRESS, &magic); - - byte1 = readb(brd->re_map_membase); - byte2 = readb(brd->re_map_membase + 1); - - /* - * If the board correctly swapped to the OTPROM memory, - * the first 2 bytes (header) should be 0x55, 0xAA - */ - if (byte1 == 0x55 && byte2 == 0xAA) { - base_offset = 0; - - /* - * We have to run through all the OTPROM memory looking - * for the VPD offset. - */ - while (base_offset <= EXPANSION_ROM_SIZE) { - /* - * Lots of magic numbers here. - * - * The VPD offset is located inside the ROM Data - * Structure. - * - * We also have to remember the length of each - * ROM Data Structure, so we can "hop" to the next - * entry if the VPD isn't in the current - * ROM Data Structure. - */ - rom_offset = readw(brd->re_map_membase + - base_offset + 0x18); - image_length = readw(brd->re_map_membase + - rom_offset + 0x10) * 512; - vpd_offset = readw(brd->re_map_membase + - rom_offset + 0x08); - - /* Found the VPD entry */ - if (vpd_offset) - break; - - /* We didn't find a VPD entry, go to next ROM entry. */ - base_offset += image_length; - - byte1 = readb(brd->re_map_membase + base_offset); - byte2 = readb(brd->re_map_membase + base_offset + 1); - - /* - * If the new ROM offset doesn't have 0x55, 0xAA - * as its header, we have run out of ROM. - */ - if (byte1 != 0x55 || byte2 != 0xAA) - break; - } - - /* - * If we have a VPD offset, then mark the board - * as having a valid VPD, and copy VPDSIZE (512) bytes of - * that VPD to the buffer we have in our board structure. - */ - if (vpd_offset) { - brd->bd_flags |= BD_HAS_VPD; - for (i = 0; i < VPDSIZE; i++) { - brd->vpd[i] = readb(brd->re_map_membase + - vpd_offset + i); - } - } - } - - /* - * We MUST poke the magic number at the PCI Rom Address location again. - * This makes the card report the regular board memory back to us, - * rather than the OTPROM memory. - */ - magic = FEP5_ROM_MAGIC; - pci_write_config_dword(brd->pdev, PCI_ROM_ADDRESS, magic); -} - - -static ssize_t dgap_driver_version_show(struct device_driver *ddp, char *buf) -{ - return snprintf(buf, PAGE_SIZE, "%s\n", DG_PART); -} -static DRIVER_ATTR(version, S_IRUSR, dgap_driver_version_show, NULL); - - -static ssize_t dgap_driver_boards_show(struct device_driver *ddp, char *buf) -{ - return snprintf(buf, PAGE_SIZE, "%d\n", dgap_numboards); -} -static DRIVER_ATTR(boards, S_IRUSR, dgap_driver_boards_show, NULL); - - -static ssize_t dgap_driver_maxboards_show(struct device_driver *ddp, char *buf) -{ - return snprintf(buf, PAGE_SIZE, "%d\n", MAXBOARDS); -} -static DRIVER_ATTR(maxboards, S_IRUSR, dgap_driver_maxboards_show, NULL); - - -static ssize_t dgap_driver_pollcounter_show(struct device_driver *ddp, - char *buf) -{ - return snprintf(buf, PAGE_SIZE, "%ld\n", dgap_poll_counter); -} -static DRIVER_ATTR(pollcounter, S_IRUSR, dgap_driver_pollcounter_show, NULL); - -static ssize_t dgap_driver_pollrate_show(struct device_driver *ddp, char *buf) -{ - return snprintf(buf, PAGE_SIZE, "%dms\n", dgap_poll_tick); -} - -static ssize_t dgap_driver_pollrate_store(struct device_driver *ddp, - const char *buf, size_t count) -{ - if (sscanf(buf, "%d\n", &dgap_poll_tick) != 1) - return -EINVAL; - return count; -} -static DRIVER_ATTR(pollrate, (S_IRUSR | S_IWUSR), dgap_driver_pollrate_show, - dgap_driver_pollrate_store); - - -static int dgap_create_driver_sysfiles(struct pci_driver *dgap_driver) -{ - int rc = 0; - struct device_driver *driverfs = &dgap_driver->driver; - - rc |= driver_create_file(driverfs, &driver_attr_version); - rc |= driver_create_file(driverfs, &driver_attr_boards); - rc |= driver_create_file(driverfs, &driver_attr_maxboards); - rc |= driver_create_file(driverfs, &driver_attr_pollrate); - rc |= driver_create_file(driverfs, &driver_attr_pollcounter); - - return rc; -} - -static void dgap_remove_driver_sysfiles(struct pci_driver *dgap_driver) -{ - struct device_driver *driverfs = &dgap_driver->driver; - - driver_remove_file(driverfs, &driver_attr_version); - driver_remove_file(driverfs, &driver_attr_boards); - driver_remove_file(driverfs, &driver_attr_maxboards); - driver_remove_file(driverfs, &driver_attr_pollrate); - driver_remove_file(driverfs, &driver_attr_pollcounter); -} - -static struct attribute_group dgap_tty_attribute_group = { - .name = NULL, - .attrs = dgap_sysfs_tty_entries, -}; - -static void dgap_create_tty_sysfs(struct un_t *un, struct device *c) -{ - int ret; - - ret = sysfs_create_group(&c->kobj, &dgap_tty_attribute_group); - if (ret) - return; - - dev_set_drvdata(c, un); -} - -static void dgap_remove_tty_sysfs(struct device *c) -{ - sysfs_remove_group(&c->kobj, &dgap_tty_attribute_group); -} - -/* - * Create pr and tty device entries - */ -static int dgap_tty_register_ports(struct board_t *brd) -{ - struct channel_t *ch; - int i; - int ret; - - brd->serial_ports = kcalloc(brd->nasync, sizeof(*brd->serial_ports), - GFP_KERNEL); - if (!brd->serial_ports) - return -ENOMEM; - - brd->printer_ports = kcalloc(brd->nasync, sizeof(*brd->printer_ports), - GFP_KERNEL); - if (!brd->printer_ports) { - ret = -ENOMEM; - goto free_serial_ports; - } - - for (i = 0; i < brd->nasync; i++) { - tty_port_init(&brd->serial_ports[i]); - tty_port_init(&brd->printer_ports[i]); - } - - ch = brd->channels[0]; - for (i = 0; i < brd->nasync; i++, ch = brd->channels[i]) { - struct device *classp; - - classp = tty_port_register_device(&brd->serial_ports[i], - brd->serial_driver, - i, NULL); - - if (IS_ERR(classp)) { - ret = PTR_ERR(classp); - goto unregister_ttys; - } - - dgap_create_tty_sysfs(&ch->ch_tun, classp); - ch->ch_tun.un_sysfs = classp; - - classp = tty_port_register_device(&brd->printer_ports[i], - brd->print_driver, - i, NULL); - - if (IS_ERR(classp)) { - ret = PTR_ERR(classp); - goto unregister_ttys; - } - - dgap_create_tty_sysfs(&ch->ch_pun, classp); - ch->ch_pun.un_sysfs = classp; - } - dgap_create_ports_sysfiles(brd); - - return 0; - -unregister_ttys: - while (i >= 0) { - ch = brd->channels[i]; - if (ch->ch_tun.un_sysfs) { - dgap_remove_tty_sysfs(ch->ch_tun.un_sysfs); - tty_unregister_device(brd->serial_driver, i); - } - - if (ch->ch_pun.un_sysfs) { - dgap_remove_tty_sysfs(ch->ch_pun.un_sysfs); - tty_unregister_device(brd->print_driver, i); - } - i--; - } - - for (i = 0; i < brd->nasync; i++) { - tty_port_destroy(&brd->serial_ports[i]); - tty_port_destroy(&brd->printer_ports[i]); - } - - kfree(brd->printer_ports); - brd->printer_ports = NULL; - -free_serial_ports: - kfree(brd->serial_ports); - brd->serial_ports = NULL; - - return ret; -} - -/* - * dgap_cleanup_tty() - * - * Uninitialize the TTY portion of this driver. Free all memory and - * resources. - */ -static void dgap_cleanup_tty(struct board_t *brd) -{ - struct device *dev; - unsigned int i; - - for (i = 0; i < brd->nasync; i++) { - tty_port_destroy(&brd->serial_ports[i]); - dev = brd->channels[i]->ch_tun.un_sysfs; - dgap_remove_tty_sysfs(dev); - tty_unregister_device(brd->serial_driver, i); - } - tty_unregister_driver(brd->serial_driver); - put_tty_driver(brd->serial_driver); - kfree(brd->serial_ports); - - for (i = 0; i < brd->nasync; i++) { - tty_port_destroy(&brd->printer_ports[i]); - dev = brd->channels[i]->ch_pun.un_sysfs; - dgap_remove_tty_sysfs(dev); - tty_unregister_device(brd->print_driver, i); - } - tty_unregister_driver(brd->print_driver); - put_tty_driver(brd->print_driver); - kfree(brd->printer_ports); -} - -static int dgap_request_irq(struct board_t *brd) -{ - int rc; - - if (!brd || brd->magic != DGAP_BOARD_MAGIC) - return -ENODEV; - - /* - * Set up our interrupt handler if we are set to do interrupts. - */ - if (dgap_config_get_useintr(brd) && brd->irq) { - rc = request_irq(brd->irq, dgap_intr, IRQF_SHARED, "DGAP", brd); - - if (!rc) - brd->intr_used = 1; - } - return 0; -} - -static void dgap_free_irq(struct board_t *brd) -{ - if (brd->intr_used && brd->irq) - free_irq(brd->irq, brd); -} - -static int dgap_firmware_load(struct pci_dev *pdev, int card_type, - struct board_t *brd) -{ - const struct firmware *fw; - char *tmp_ptr; - int ret; - char *dgap_config_buf; - - dgap_get_vpd(brd); - dgap_do_reset_board(brd); - - if (fw_info[card_type].conf_name) { - ret = request_firmware(&fw, fw_info[card_type].conf_name, - &pdev->dev); - if (ret) { - dev_err(&pdev->dev, "config file %s not found\n", - fw_info[card_type].conf_name); - return ret; - } - - dgap_config_buf = kzalloc(fw->size + 1, GFP_KERNEL); - if (!dgap_config_buf) { - release_firmware(fw); - return -ENOMEM; - } - - memcpy(dgap_config_buf, fw->data, fw->size); - release_firmware(fw); - - /* - * preserve dgap_config_buf - * as dgap_parsefile would - * otherwise alter it. - */ - tmp_ptr = dgap_config_buf; - - if (dgap_parsefile(&tmp_ptr) != 0) { - kfree(dgap_config_buf); - return -EINVAL; - } - kfree(dgap_config_buf); - } - - /* - * Match this board to a config the user created for us. - */ - brd->bd_config = - dgap_find_config(brd->type, brd->pci_bus, brd->pci_slot); - - /* - * Because the 4 port Xr products share the same PCI ID - * as the 8 port Xr products, if we receive a NULL config - * back, and this is a PAPORT8 board, retry with a - * PAPORT4 attempt as well. - */ - if (brd->type == PAPORT8 && !brd->bd_config) - brd->bd_config = - dgap_find_config(PAPORT4, brd->pci_bus, brd->pci_slot); - - if (!brd->bd_config) { - dev_err(&pdev->dev, "No valid configuration found\n"); - return -EINVAL; - } - - if (fw_info[card_type].bios_name) { - ret = request_firmware(&fw, fw_info[card_type].bios_name, - &pdev->dev); - if (ret) { - dev_err(&pdev->dev, "bios file %s not found\n", - fw_info[card_type].bios_name); - return ret; - } - dgap_do_bios_load(brd, fw->data, fw->size); - release_firmware(fw); - - /* Wait for BIOS to test board... */ - ret = dgap_test_bios(brd); - if (ret) - return ret; - } - - if (fw_info[card_type].fep_name) { - ret = request_firmware(&fw, fw_info[card_type].fep_name, - &pdev->dev); - if (ret) { - dev_err(&pdev->dev, "dgap: fep file %s not found\n", - fw_info[card_type].fep_name); - return ret; - } - dgap_do_fep_load(brd, fw->data, fw->size); - release_firmware(fw); - - /* Wait for FEP to load on board... */ - ret = dgap_test_fep(brd); - if (ret) - return ret; - } - -#ifdef DIGI_CONCENTRATORS_SUPPORTED - /* - * If this is a CX or EPCX, we need to see if the firmware - * is requesting a concentrator image from us. - */ - if ((bd->type == PCX) || (bd->type == PEPC)) { - chk_addr = (u16 *)(vaddr + DOWNREQ); - /* Nonzero if FEP is requesting concentrator image. */ - check = readw(chk_addr); - vaddr = brd->re_map_membase; - } - - if (fw_info[card_type].con_name && check && vaddr) { - ret = request_firmware(&fw, fw_info[card_type].con_name, - &pdev->dev); - if (ret) { - dev_err(&pdev->dev, "conc file %s not found\n", - fw_info[card_type].con_name); - return ret; - } - /* Put concentrator firmware loading code here */ - offset = readw((u16 *)(vaddr + DOWNREQ)); - memcpy_toio(offset, fw->data, fw->size); - - dgap_do_conc_load(brd, (char *)fw->data, fw->size) - release_firmware(fw); - } -#endif - - return 0; -} - -/* - * dgap_tty_init() - * - * Init the tty subsystem. Called once per board after board has been - * downloaded and init'ed. - */ -static int dgap_tty_init(struct board_t *brd) -{ - int i; - int tlw; - uint true_count; - u8 __iomem *vaddr; - u8 modem; - struct channel_t *ch; - struct bs_t __iomem *bs; - struct cm_t __iomem *cm; - int ret; - - /* - * Initialize board structure elements. - */ - - vaddr = brd->re_map_membase; - true_count = readw((vaddr + NCHAN)); - - brd->nasync = dgap_config_get_num_prts(brd); - - if (!brd->nasync) - brd->nasync = brd->maxports; - - if (brd->nasync > brd->maxports) - brd->nasync = brd->maxports; - - if (true_count != brd->nasync) { - dev_warn(&brd->pdev->dev, - "%s configured for %d ports, has %d ports.\n", - brd->name, brd->nasync, true_count); - - if ((brd->type == PPCM) && - (true_count == 64 || true_count == 0)) { - dev_warn(&brd->pdev->dev, - "Please make SURE the EBI cable running from the card\n"); - dev_warn(&brd->pdev->dev, - "to each EM module is plugged into EBI IN!\n"); - } - - brd->nasync = true_count; - - /* If no ports, don't bother going any further */ - if (!brd->nasync) { - brd->state = BOARD_FAILED; - brd->dpastatus = BD_NOFEP; - return -EIO; - } - } - - /* - * Allocate channel memory that might not have been allocated - * when the driver was first loaded. - */ - for (i = 0; i < brd->nasync; i++) { - brd->channels[i] = - kzalloc(sizeof(struct channel_t), GFP_KERNEL); - if (!brd->channels[i]) { - ret = -ENOMEM; - goto free_chan; - } - } - - ch = brd->channels[0]; - vaddr = brd->re_map_membase; - - bs = (struct bs_t __iomem *)((ulong)vaddr + CHANBUF); - cm = (struct cm_t __iomem *)((ulong)vaddr + CMDBUF); - - brd->bd_bs = bs; - - /* Set up channel variables */ - for (i = 0; i < brd->nasync; i++, ch = brd->channels[i], bs++) { - spin_lock_init(&ch->ch_lock); - - /* Store all our magic numbers */ - ch->magic = DGAP_CHANNEL_MAGIC; - ch->ch_tun.magic = DGAP_UNIT_MAGIC; - ch->ch_tun.un_type = DGAP_SERIAL; - ch->ch_tun.un_ch = ch; - ch->ch_tun.un_dev = i; - - ch->ch_pun.magic = DGAP_UNIT_MAGIC; - ch->ch_pun.un_type = DGAP_PRINT; - ch->ch_pun.un_ch = ch; - ch->ch_pun.un_dev = i; - - ch->ch_vaddr = vaddr; - ch->ch_bs = bs; - ch->ch_cm = cm; - ch->ch_bd = brd; - ch->ch_portnum = i; - ch->ch_digi = dgap_digi_init; - - /* - * Set up digi dsr and dcd bits based on altpin flag. - */ - if (dgap_config_get_altpin(brd)) { - ch->ch_dsr = DM_CD; - ch->ch_cd = DM_DSR; - ch->ch_digi.digi_flags |= DIGI_ALTPIN; - } else { - ch->ch_cd = DM_CD; - ch->ch_dsr = DM_DSR; - } - - ch->ch_taddr = vaddr + (ioread16(&ch->ch_bs->tx_seg) << 4); - ch->ch_raddr = vaddr + (ioread16(&ch->ch_bs->rx_seg) << 4); - ch->ch_tx_win = 0; - ch->ch_rx_win = 0; - ch->ch_tsize = readw(&ch->ch_bs->tx_max) + 1; - ch->ch_rsize = readw(&ch->ch_bs->rx_max) + 1; - ch->ch_tstart = 0; - ch->ch_rstart = 0; - - /* - * Set queue water marks, interrupt mask, - * and general tty parameters. - */ - tlw = ch->ch_tsize >= 2000 ? ((ch->ch_tsize * 5) / 8) : - ch->ch_tsize / 2; - ch->ch_tlw = tlw; - - dgap_cmdw(ch, STLOW, tlw, 0); - - dgap_cmdw(ch, SRLOW, ch->ch_rsize / 2, 0); - - dgap_cmdw(ch, SRHIGH, 7 * ch->ch_rsize / 8, 0); - - ch->ch_mistat = readb(&ch->ch_bs->m_stat); - - init_waitqueue_head(&ch->ch_flags_wait); - init_waitqueue_head(&ch->ch_tun.un_flags_wait); - init_waitqueue_head(&ch->ch_pun.un_flags_wait); - - /* Turn on all modem interrupts for now */ - modem = (DM_CD | DM_DSR | DM_CTS | DM_RI); - writeb(modem, &ch->ch_bs->m_int); - - /* - * Set edelay to 0 if interrupts are turned on, - * otherwise set edelay to the usual 100. - */ - if (brd->intr_used) - writew(0, &ch->ch_bs->edelay); - else - writew(100, &ch->ch_bs->edelay); - - writeb(1, &ch->ch_bs->idata); - } - - return 0; - -free_chan: - while (--i >= 0) { - kfree(brd->channels[i]); - brd->channels[i] = NULL; - } - return ret; -} - -/* - * dgap_tty_free() - * - * Free the channles which are allocated in dgap_tty_init(). - */ -static void dgap_tty_free(struct board_t *brd) -{ - int i; - - for (i = 0; i < brd->nasync; i++) - kfree(brd->channels[i]); -} - -static int dgap_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) -{ - int rc; - struct board_t *brd; - - if (dgap_numboards >= MAXBOARDS) - return -EPERM; - - rc = pci_enable_device(pdev); - if (rc) - return -EIO; - - brd = dgap_found_board(pdev, ent->driver_data, dgap_numboards); - if (IS_ERR(brd)) - return PTR_ERR(brd); - - rc = dgap_firmware_load(pdev, ent->driver_data, brd); - if (rc) - goto cleanup_brd; - - rc = dgap_alloc_flipbuf(brd); - if (rc) - goto cleanup_brd; - - rc = dgap_tty_register(brd); - if (rc) - goto free_flipbuf; - - rc = dgap_request_irq(brd); - if (rc) - goto unregister_tty; - - /* - * Do tty device initialization. - */ - rc = dgap_tty_init(brd); - if (rc < 0) - goto free_irq; - - rc = dgap_tty_register_ports(brd); - if (rc) - goto tty_free; - - brd->state = BOARD_READY; - brd->dpastatus = BD_RUNNING; - - dgap_board[dgap_numboards++] = brd; - - return 0; - -tty_free: - dgap_tty_free(brd); -free_irq: - dgap_free_irq(brd); -unregister_tty: - dgap_tty_unregister(brd); -free_flipbuf: - dgap_free_flipbuf(brd); -cleanup_brd: - dgap_cleanup_nodes(); - dgap_unmap(brd); - kfree(brd); - - return rc; -} - -/* - * dgap_cleanup_board() - * - * Free all the memory associated with a board - */ -static void dgap_cleanup_board(struct board_t *brd) -{ - unsigned int i; - - if (!brd || brd->magic != DGAP_BOARD_MAGIC) - return; - - dgap_free_irq(brd); - - tasklet_kill(&brd->helper_tasklet); - - dgap_unmap(brd); - - /* Free all allocated channels structs */ - for (i = 0; i < MAXPORTS ; i++) - kfree(brd->channels[i]); - - kfree(brd->flipbuf); - kfree(brd->flipflagbuf); - - dgap_board[brd->boardnum] = NULL; - - kfree(brd); -} - -static void dgap_stop(bool removesys, struct pci_driver *drv) -{ - unsigned long lock_flags; - - spin_lock_irqsave(&dgap_poll_lock, lock_flags); - dgap_poll_stop = 1; - spin_unlock_irqrestore(&dgap_poll_lock, lock_flags); - - del_timer_sync(&dgap_poll_timer); - if (removesys) - dgap_remove_driver_sysfiles(drv); - - device_destroy(dgap_class, MKDEV(DIGI_DGAP_MAJOR, 0)); - class_destroy(dgap_class); - unregister_chrdev(DIGI_DGAP_MAJOR, "dgap"); -} - -static void dgap_remove_one(struct pci_dev *dev) -{ - unsigned int i; - struct pci_driver *drv = to_pci_driver(dev->dev.driver); - - dgap_stop(true, drv); - for (i = 0; i < dgap_numboards; ++i) { - dgap_remove_ports_sysfiles(dgap_board[i]); - dgap_cleanup_tty(dgap_board[i]); - dgap_cleanup_board(dgap_board[i]); - } - - dgap_cleanup_nodes(); -} - -static struct pci_driver dgap_driver = { - .name = "dgap", - .probe = dgap_init_one, - .id_table = dgap_pci_tbl, - .remove = dgap_remove_one, -}; - -/* - * Start of driver. - */ -static int dgap_start(void) -{ - int rc; - unsigned long flags; - struct device *device; - - dgap_numboards = 0; - - pr_info("For the tools package please visit http://www.digi.com\n"); - - /* - * Register our base character device into the kernel. - */ - - /* - * Register management/dpa devices - */ - rc = register_chrdev(DIGI_DGAP_MAJOR, "dgap", &dgap_board_fops); - if (rc < 0) - return rc; - - dgap_class = class_create(THIS_MODULE, "dgap_mgmt"); - if (IS_ERR(dgap_class)) { - rc = PTR_ERR(dgap_class); - goto failed_class; - } - - device = device_create(dgap_class, NULL, - MKDEV(DIGI_DGAP_MAJOR, 0), - NULL, "dgap_mgmt"); - if (IS_ERR(device)) { - rc = PTR_ERR(device); - goto failed_device; - } - - /* Start the poller */ - spin_lock_irqsave(&dgap_poll_lock, flags); - setup_timer(&dgap_poll_timer, dgap_poll_handler, 0); - dgap_poll_timer.data = 0; - dgap_poll_time = jiffies + dgap_jiffies_from_ms(dgap_poll_tick); - dgap_poll_timer.expires = dgap_poll_time; - spin_unlock_irqrestore(&dgap_poll_lock, flags); - - add_timer(&dgap_poll_timer); - - return rc; - -failed_device: - class_destroy(dgap_class); -failed_class: - unregister_chrdev(DIGI_DGAP_MAJOR, "dgap"); - return rc; -} - -/************************************************************************ - * - * Driver load/unload functions - * - ************************************************************************/ - -/* - * init_module() - * - * Module load. This is where it all starts. - */ -static int dgap_init_module(void) -{ - int rc; - - pr_info("%s, Digi International Part Number %s\n", DG_NAME, DG_PART); - - rc = dgap_start(); - if (rc) - return rc; - - rc = pci_register_driver(&dgap_driver); - if (rc) { - dgap_stop(false, NULL); - return rc; - } - - rc = dgap_create_driver_sysfiles(&dgap_driver); - if (rc) - goto err_unregister; - - dgap_driver_state = DRIVER_READY; - - return 0; - -err_unregister: - pci_unregister_driver(&dgap_driver); - return rc; -} - -/* - * dgap_cleanup_module() - * - * Module unload. This is where it all ends. - */ -static void dgap_cleanup_module(void) -{ - if (dgap_numboards) - pci_unregister_driver(&dgap_driver); -} - -module_init(dgap_init_module); -module_exit(dgap_cleanup_module); - -MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Digi International, http://www.digi.com"); -MODULE_DESCRIPTION("Driver for the Digi International EPCA PCI based product line"); -MODULE_SUPPORTED_DEVICE("dgap"); diff --git a/drivers/staging/dgap/dgap.h b/drivers/staging/dgap/dgap.h deleted file mode 100644 index c84dbf2..0000000 --- a/drivers/staging/dgap/dgap.h +++ /dev/null @@ -1,1229 +0,0 @@ -/* - * Copyright 2003 Digi International (www.digi.com) - * Scott H Kilau <Scott_Kilau at digi dot com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2, or (at your option) - * any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY, EXPRESS OR IMPLIED; without even the - * implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR - * PURPOSE. See the GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - * NOTE: THIS IS A SHARED HEADER. DO NOT CHANGE CODING STYLE!!! - * - ************************************************************************* - * - * Driver includes - * - *************************************************************************/ - -#ifndef __DGAP_DRIVER_H -#define __DGAP_DRIVER_H - -#include <linux/types.h> /* To pick up the varions Linux types */ -#include <linux/tty.h> /* To pick up the various tty structs/defines */ -#include <linux/interrupt.h> /* For irqreturn_t type */ - -#ifndef TRUE -# define TRUE 1 -#endif - -#ifndef FALSE -# define FALSE 0 -#endif - -#if !defined(TTY_FLIPBUF_SIZE) -# define TTY_FLIPBUF_SIZE 512 -#endif - -/************************************************************************* - * - * Driver defines - * - *************************************************************************/ - -/* - * Driver identification - */ -#define DG_NAME "dgap-1.3-16" -#define DG_PART "40002347_C" -#define DRVSTR "dgap" - -/* - * defines from dgap_pci.h - */ -#define PCIMAX 32 /* maximum number of PCI boards */ - -#define DIGI_VID 0x114F - -#define PCI_DEV_EPC_DID 0x0002 -#define PCI_DEV_XEM_DID 0x0004 -#define PCI_DEV_XR_DID 0x0005 -#define PCI_DEV_CX_DID 0x0006 -#define PCI_DEV_XRJ_DID 0x0009 /* PLX-based Xr adapter */ -#define PCI_DEV_XR_IBM_DID 0x0011 /* IBM 8-port Async Adapter */ -#define PCI_DEV_XR_BULL_DID 0x0013 /* BULL 8-port Async Adapter */ -#define PCI_DEV_XR_SAIP_DID 0x001c /* SAIP card - Xr adapter */ -#define PCI_DEV_XR_422_DID 0x0012 /* Xr-422 */ -#define PCI_DEV_920_2_DID 0x0034 /* XR-Plus 920 K, 2 port */ -#define PCI_DEV_920_4_DID 0x0026 /* XR-Plus 920 K, 4 port */ -#define PCI_DEV_920_8_DID 0x0027 /* XR-Plus 920 K, 8 port */ -#define PCI_DEV_EPCJ_DID 0x000a /* PLX 9060 chip for PCI */ -#define PCI_DEV_CX_IBM_DID 0x001b /* IBM 128-port Async Adapter */ -#define PCI_DEV_920_8_HP_DID 0x0058 /* HP XR-Plus 920 K, 8 port */ -#define PCI_DEV_XEM_HP_DID 0x0059 /* HP Xem PCI */ - -#define PCI_DEV_XEM_NAME "AccelePort XEM" -#define PCI_DEV_CX_NAME "AccelePort CX" -#define PCI_DEV_XR_NAME "AccelePort Xr" -#define PCI_DEV_XRJ_NAME "AccelePort Xr (PLX)" -#define PCI_DEV_XR_SAIP_NAME "AccelePort Xr (SAIP)" -#define PCI_DEV_920_2_NAME "AccelePort Xr920 2 port" -#define PCI_DEV_920_4_NAME "AccelePort Xr920 4 port" -#define PCI_DEV_920_8_NAME "AccelePort Xr920 8 port" -#define PCI_DEV_XR_422_NAME "AccelePort Xr 422" -#define PCI_DEV_EPCJ_NAME "AccelePort EPC (PLX)" -#define PCI_DEV_XR_BULL_NAME "AccelePort Xr (BULL)" -#define PCI_DEV_XR_IBM_NAME "AccelePort Xr (IBM)" -#define PCI_DEV_CX_IBM_NAME "AccelePort CX (IBM)" -#define PCI_DEV_920_8_HP_NAME "AccelePort Xr920 8 port (HP)" -#define PCI_DEV_XEM_HP_NAME "AccelePort XEM (HP)" - -/* - * On the PCI boards, there is no IO space allocated - * The I/O registers will be in the first 3 bytes of the - * upper 2MB of the 4MB memory space. The board memory - * will be mapped into the low 2MB of the 4MB memory space - */ - -/* Potential location of PCI Bios from E0000 to FFFFF*/ -#define PCI_BIOS_SIZE 0x00020000 - -/* Size of Memory and I/O for PCI (4MB) */ -#define PCI_RAM_SIZE 0x00400000 - -/* Size of Memory (2MB) */ -#define PCI_MEM_SIZE 0x00200000 - -/* Max PCI Window Size (2MB) */ -#define PCI_WIN_SIZE 0x00200000 - -#define PCI_WIN_SHIFT 21 /* 21 bits max */ - -/* Offset of I/0 in Memory (2MB) */ -#define PCI_IO_OFFSET 0x00200000 - -/* Size of IO (2MB) */ -#define PCI_IO_SIZE_DGAP 0x00200000 - -/* Number of boards we support at once. */ -#define MAXBOARDS 32 -#define MAXPORTS 224 -#define MAXTTYNAMELEN 200 - -/* Our 3 magic numbers for our board, channel and unit structs */ -#define DGAP_BOARD_MAGIC 0x5c6df104 -#define DGAP_CHANNEL_MAGIC 0x6c6df104 -#define DGAP_UNIT_MAGIC 0x7c6df104 - -/* Serial port types */ -#define DGAP_SERIAL 0 -#define DGAP_PRINT 1 - -#define SERIAL_TYPE_NORMAL 1 - -/* 4 extra for alignment play space */ -#define WRITEBUFLEN ((4096) + 4) -#define MYFLIPLEN N_TTY_BUF_SIZE - -#define SBREAK_TIME 0x25 -#define U2BSIZE 0x400 - -#define dgap_jiffies_from_ms(a) (((a) * HZ) / 1000) - -/* - * Our major for the mgmt devices. - * - * We can use 22, because Digi was allocated 22 and 23 for the epca driver. - * 22 has now become obsolete now that the "cu" devices have - * been removed from 2.6. - * Also, this *IS* the epca driver, just PCI only now. - */ -#ifndef DIGI_DGAP_MAJOR -# define DIGI_DGAP_MAJOR 22 -#endif - -/* - * The parameters we use to define the periods of the moving averages. - */ -#define MA_PERIOD (HZ / 10) -#define SMA_DUR (1 * HZ) -#define EMA_DUR (1 * HZ) -#define SMA_NPERIODS (SMA_DUR / MA_PERIOD) -#define EMA_NPERIODS (EMA_DUR / MA_PERIOD) - -/* - * Define a local default termios struct. All ports will be created - * with this termios initially. This is the same structure that is defined - * as the default in tty_io.c with the same settings overridden as in serial.c - * - * In short, this should match the internal serial ports' defaults. - */ -#define DEFAULT_IFLAGS (ICRNL | IXON) -#define DEFAULT_OFLAGS (OPOST | ONLCR) -#define DEFAULT_CFLAGS (B9600 | CS8 | CREAD | HUPCL | CLOCAL) -#define DEFAULT_LFLAGS (ISIG | ICANON | ECHO | ECHOE | ECHOK | \ - ECHOCTL | ECHOKE | IEXTEN) - -#ifndef _POSIX_VDISABLE -#define _POSIX_VDISABLE ('\0') -#endif - -#define SNIFF_MAX 65536 /* Sniff buffer size (2^n) */ -#define SNIFF_MASK (SNIFF_MAX - 1) /* Sniff wrap mask */ - -#define VPDSIZE (512) - -/************************************************************************ - * FEP memory offsets - ************************************************************************/ -#define START 0x0004L /* Execution start address */ - -#define CMDBUF 0x0d10L /* Command (cm_t) structure offset */ -#define CMDSTART 0x0400L /* Start of command buffer */ -#define CMDMAX 0x0800L /* End of command buffer */ - -#define EVBUF 0x0d18L /* Event (ev_t) structure */ -#define EVSTART 0x0800L /* Start of event buffer */ -#define EVMAX 0x0c00L /* End of event buffer */ -#define FEP5_PLUS 0x0E40 /* ASCII '5' and ASCII 'A' is here */ -#define ECS_SEG 0x0E44 /* Segment of the extended */ - /* channel structure */ -#define LINE_SPEED 0x10 /* Offset into ECS_SEG for line */ - /* speed if the fep has extended */ - /* capabilities */ - -/* BIOS MAGIC SPOTS */ -#define ERROR 0x0C14L /* BIOS error code */ -#define SEQUENCE 0x0C12L /* BIOS sequence indicator */ -#define POSTAREA 0x0C00L /* POST complete message area */ - -/* FEP MAGIC SPOTS */ -#define FEPSTAT POSTAREA /* OS here when FEP comes up */ -#define NCHAN 0x0C02L /* number of ports FEP sees */ -#define PANIC 0x0C10L /* PANIC area for FEP */ -#define KMEMEM 0x0C30L /* Memory for KME use */ -#define CONFIG 0x0CD0L /* Concentrator configuration info */ -#define CONFIGSIZE 0x0030 /* configuration info size */ -#define DOWNREQ 0x0D00 /* Download request buffer pointer */ - -#define CHANBUF 0x1000L /* Async channel (bs_t) structs */ -#define FEPOSSIZE 0x1FFF /* 8K FEPOS */ - -#define XEMPORTS 0xC02 /* - * Offset in board memory where FEP5 stores - * how many ports it has detected. - * NOTE: FEP5 reports 64 ports when the user - * has the cable in EBI OUT instead of EBI IN. - */ - -#define FEPCLR 0x00 -#define FEPMEM 0x02 -#define FEPRST 0x04 -#define FEPINT 0x08 -#define FEPMASK 0x0e -#define FEPWIN 0x80 - -#define LOWMEM 0x0100 -#define HIGHMEM 0x7f00 - -#define FEPTIMEOUT 200000 - -#define ENABLE_INTR 0x0e04 /* Enable interrupts flag */ -#define FEPPOLL_MIN 1 /* minimum of 1 millisecond */ -#define FEPPOLL_MAX 20 /* maximum of 20 milliseconds */ -#define FEPPOLL 0x0c26 /* Fep event poll interval */ - -#define IALTPIN 0x0080 /* Input flag to swap DSR <-> DCD */ - -/************************************************************************ - * FEP supported functions - ************************************************************************/ -#define SRLOW 0xe0 /* Set receive low water */ -#define SRHIGH 0xe1 /* Set receive high water */ -#define FLUSHTX 0xe2 /* Flush transmit buffer */ -#define PAUSETX 0xe3 /* Pause data transmission */ -#define RESUMETX 0xe4 /* Resume data transmission */ -#define SMINT 0xe5 /* Set Modem Interrupt */ -#define SAFLOWC 0xe6 /* Set Aux. flow control chars */ -#define SBREAK 0xe8 /* Send break */ -#define SMODEM 0xe9 /* Set 8530 modem control lines */ -#define SIFLAG 0xea /* Set UNIX iflags */ -#define SFLOWC 0xeb /* Set flow control characters */ -#define STLOW 0xec /* Set transmit low water mark */ -#define RPAUSE 0xee /* Pause receive */ -#define RRESUME 0xef /* Resume receive */ -#define CHRESET 0xf0 /* Reset Channel */ -#define BUFSETALL 0xf2 /* Set Tx & Rx buffer size avail*/ -#define SOFLAG 0xf3 /* Set UNIX oflags */ -#define SHFLOW 0xf4 /* Set hardware handshake */ -#define SCFLAG 0xf5 /* Set UNIX cflags */ -#define SVNEXT 0xf6 /* Set VNEXT character */ -#define SPINTFC 0xfc /* Reserved */ -#define SCOMMODE 0xfd /* Set RS232/422 mode */ - -/************************************************************************ - * Modes for SCOMMODE - ************************************************************************/ -#define MODE_232 0x00 -#define MODE_422 0x01 - -/************************************************************************ - * Event flags. - ************************************************************************/ -#define IFBREAK 0x01 /* Break received */ -#define IFTLW 0x02 /* Transmit low water */ -#define IFTEM 0x04 /* Transmitter empty */ -#define IFDATA 0x08 /* Receive data present */ -#define IFMODEM 0x20 /* Modem status change */ - -/************************************************************************ - * Modem flags - ************************************************************************/ -# define DM_RTS 0x02 /* Request to send */ -# define DM_CD 0x80 /* Carrier detect */ -# define DM_DSR 0x20 /* Data set ready */ -# define DM_CTS 0x10 /* Clear to send */ -# define DM_RI 0x40 /* Ring indicator */ -# define DM_DTR 0x01 /* Data terminal ready */ - -/* - * defines from dgap_conf.h - */ -#define NULLNODE 0 /* header node, not used */ -#define BNODE 1 /* Board node */ -#define LNODE 2 /* Line node */ -#define CNODE 3 /* Concentrator node */ -#define MNODE 4 /* EBI Module node */ -#define TNODE 5 /* tty name prefix node */ -#define CUNODE 6 /* cu name prefix (non-SCO) */ -#define PNODE 7 /* trans. print prefix node */ -#define JNODE 8 /* maJor number node */ -#define ANODE 9 /* altpin */ -#define TSNODE 10 /* tty structure size */ -#define CSNODE 11 /* channel structure size */ -#define BSNODE 12 /* board structure size */ -#define USNODE 13 /* unit schedule structure size */ -#define FSNODE 14 /* f2200 structure size */ -#define VSNODE 15 /* size of VPIX structures */ -#define INTRNODE 16 /* enable interrupt */ - -/* Enumeration of tokens */ -#define BEGIN 1 -#define END 2 -#define BOARD 10 - -#define EPCFS 11 /* start of EPC family definitions */ -#define ICX 11 -#define MCX 13 -#define PCX 14 -#define IEPC 15 -#define EEPC 16 -#define MEPC 17 -#define IPCM 18 -#define EPCM 19 -#define MPCM 20 -#define PEPC 21 -#define PPCM 22 -#ifdef CP -#define ICP 23 -#define ECP 24 -#define MCP 25 -#endif -#define EPCFE 25 /* end of EPC family definitions */ -#define PC2E 26 -#define PC4E 27 -#define PC4E8K 28 -#define PC8E 29 -#define PC8E8K 30 -#define PC16E 31 -#define MC2E8K 34 -#define MC4E8K 35 -#define MC8E8K 36 - -#define AVANFS 42 /* start of Avanstar family definitions */ -#define A8P 42 -#define A16P 43 -#define AVANFE 43 /* end of Avanstar family definitions */ - -#define DA2000FS 44 /* start of AccelePort 2000 family definitions */ -#define DA22 44 /* AccelePort 2002 */ -#define DA24 45 /* AccelePort 2004 */ -#define DA28 46 /* AccelePort 2008 */ -#define DA216 47 /* AccelePort 2016 */ -#define DAR4 48 /* AccelePort RAS 4 port */ -#define DAR8 49 /* AccelePort RAS 8 port */ -#define DDR24 50 /* DataFire RAS 24 port */ -#define DDR30 51 /* DataFire RAS 30 port */ -#define DDR48 52 /* DataFire RAS 48 port */ -#define DDR60 53 /* DataFire RAS 60 port */ -#define DA2000FE 53 /* end of AccelePort 2000/RAS family definitions */ - -#define PCXRFS 106 /* start of PCXR family definitions */ -#define APORT4 106 -#define APORT8 107 -#define PAPORT4 108 -#define PAPORT8 109 -#define APORT4_920I 110 -#define APORT8_920I 111 -#define APORT4_920P 112 -#define APORT8_920P 113 -#define APORT2_920P 114 -#define PCXRFE 117 /* end of PCXR family definitions */ - -#define LINE 82 -#ifdef T1 -#define T1M 83 -#define E1M 84 -#endif -#define CONC 64 -#define CX 65 -#define EPC 66 -#define MOD 67 -#define PORTS 68 -#define METHOD 69 -#define CUSTOM 70 -#define BASIC 71 -#define STATUS 72 -#define MODEM 73 -/* The following tokens can appear in multiple places */ -#define SPEED 74 -#define NPORTS 75 -#define ID 76 -#define CABLE 77 -#define CONNECT 78 -#define MEM 80 -#define DPSZ 81 - -#define TTYN 90 -#define CU 91 -#define PRINT 92 -#define XPRINT 93 -#define CMAJOR 94 -#define ALTPIN 95 -#define STARTO 96 -#define USEINTR 97 -#define PCIINFO 98 - -#define TTSIZ 100 -#define CHSIZ 101 -#define BSSIZ 102 -#define UNTSIZ 103 -#define F2SIZ 104 -#define VPSIZ 105 - -#define TOTAL_BOARD 2 -#define CURRENT_BRD 4 -#define BOARD_TYPE 6 -#define IO_ADDRESS 8 -#define MEM_ADDRESS 10 - -#define FIELDS_PER_PAGE 18 - -#define TB_FIELD 1 -#define CB_FIELD 3 -#define BT_FIELD 5 -#define IO_FIELD 7 -#define ID_FIELD 8 -#define ME_FIELD 9 -#define TTY_FIELD 11 -#define CU_FIELD 13 -#define PR_FIELD 15 -#define MPR_FIELD 17 - -#define MAX_FIELD 512 - -#define INIT 0 -#define NITEMS 128 -#define MAX_ITEM 512 - -#define DSCRINST 1 -#define DSCRNUM 3 -#define ALTPINQ 5 -#define SSAVE 7 - -#define DSCR "32" -#define ONETONINE "123456789" -#define ALL "1234567890" - -/* - * All the possible states the driver can be while being loaded. - */ -enum { - DRIVER_INITIALIZED = 0, - DRIVER_READY -}; - -/* - * All the possible states the board can be while booting up. - */ -enum { - BOARD_FAILED = 0, - BOARD_READY -}; - -/* - * All the possible states that a requested concentrator image can be in. - */ -enum { - NO_PENDING_CONCENTRATOR_REQUESTS = 0, - NEED_CONCENTRATOR, - REQUESTED_CONCENTRATOR -}; - -/* - * Modem line constants are defined as macros because DSR and - * DCD are swapable using the ditty altpin option. - */ -#define D_CD(ch) ch->ch_cd /* Carrier detect */ -#define D_DSR(ch) ch->ch_dsr /* Data set ready */ -#define D_RTS(ch) DM_RTS /* Request to send */ -#define D_CTS(ch) DM_CTS /* Clear to send */ -#define D_RI(ch) DM_RI /* Ring indicator */ -#define D_DTR(ch) DM_DTR /* Data terminal ready */ - -/************************************************************************* - * - * Structures and closely related defines. - * - *************************************************************************/ - -/* - * A structure to hold a statistics counter. We also - * compute moving averages for this counter. - */ -struct macounter { - u32 cnt; /* Total count */ - ulong accum; /* Acuumulator per period */ - ulong sma; /* Simple moving average */ - ulong ema; /* Exponential moving average */ -}; - -/************************************************************************ - * Device flag definitions for bd_flags. - ************************************************************************/ -#define BD_FEP5PLUS 0x0001 /* Supports FEP5 Plus commands */ -#define BD_HAS_VPD 0x0002 /* Board has VPD info available */ - -/* - * Per-board information - */ -struct board_t { - int magic; /* Board Magic number. */ - int boardnum; /* Board number: 0-3 */ - - int type; /* Type of board */ - char *name; /* Product Name */ - struct pci_dev *pdev; /* Pointer to the pci_dev struct */ - u16 vendor; /* PCI vendor ID */ - u16 device; /* PCI device ID */ - u16 subvendor; /* PCI subsystem vendor ID */ - u16 subdevice; /* PCI subsystem device ID */ - u8 rev; /* PCI revision ID */ - uint pci_bus; /* PCI bus value */ - uint pci_slot; /* PCI slot value */ - u16 maxports; /* MAX ports this board can handle */ - u8 vpd[VPDSIZE]; /* VPD of board, if found */ - u32 bd_flags; /* Board flags */ - - spinlock_t bd_lock; /* Used to protect board */ - - u32 state; /* State of card. */ - wait_queue_head_t state_wait; /* Place to sleep on for state change */ - - struct tasklet_struct helper_tasklet; /* Poll helper tasklet */ - - u32 wait_for_bios; - u32 wait_for_fep; - - struct cnode *bd_config; /* Config of board */ - - u16 nasync; /* Number of ports on card */ - - ulong irq; /* Interrupt request number */ - ulong intr_count; /* Count of interrupts */ - u32 intr_used; /* Non-zero if using interrupts */ - u32 intr_running; /* Non-zero if FEP knows its doing */ - /* interrupts */ - - ulong port; /* Start of base io port of the card */ - ulong port_end; /* End of base io port of the card */ - ulong membase; /* Start of base memory of the card */ - ulong membase_end; /* End of base memory of the card */ - - u8 __iomem *re_map_port; /* Remapped io port of the card */ - u8 __iomem *re_map_membase;/* Remapped memory of the card */ - - u8 inhibit_poller; /* Tells the poller to leave us alone */ - - struct channel_t *channels[MAXPORTS]; /* array of pointers to our */ - /* channels. */ - - struct tty_driver *serial_driver; - struct tty_port *serial_ports; - char serial_name[200]; - struct tty_driver *print_driver; - struct tty_port *printer_ports; - char print_name[200]; - - struct bs_t __iomem *bd_bs; /* Base structure pointer */ - - char *flipbuf; /* Our flip buffer, alloced if */ - /* board is found */ - char *flipflagbuf; /* Our flip flag buffer, alloced */ - /* if board is found */ - - u16 dpatype; /* The board "type", as defined */ - /* by DPA */ - u16 dpastatus; /* The board "status", as defined */ - /* by DPA */ - - u32 conc_dl_status; /* Status of any pending conc */ - /* download */ -}; - -/************************************************************************ - * Unit flag definitions for un_flags. - ************************************************************************/ -#define UN_ISOPEN 0x0001 /* Device is open */ -#define UN_CLOSING 0x0002 /* Line is being closed */ -#define UN_IMM 0x0004 /* Service immediately */ -#define UN_BUSY 0x0008 /* Some work this channel */ -#define UN_BREAKI 0x0010 /* Input break received */ -#define UN_PWAIT 0x0020 /* Printer waiting for terminal */ -#define UN_TIME 0x0040 /* Waiting on time */ -#define UN_EMPTY 0x0080 /* Waiting output queue empty */ -#define UN_LOW 0x0100 /* Waiting output low water mark*/ -#define UN_EXCL_OPEN 0x0200 /* Open for exclusive use */ -#define UN_WOPEN 0x0400 /* Device waiting for open */ -#define UN_WIOCTL 0x0800 /* Device waiting for open */ -#define UN_HANGUP 0x8000 /* Carrier lost */ - -struct device; - -/************************************************************************ - * Structure for terminal or printer unit. - ************************************************************************/ -struct un_t { - int magic; /* Unit Magic Number. */ - struct channel_t *un_ch; - u32 un_time; - u32 un_type; - int un_open_count; /* Counter of opens to port */ - struct tty_struct *un_tty;/* Pointer to unit tty structure */ - u32 un_flags; /* Unit flags */ - wait_queue_head_t un_flags_wait; /* Place to sleep to wait on unit */ - u32 un_dev; /* Minor device number */ - tcflag_t un_oflag; /* oflags being done on board */ - tcflag_t un_lflag; /* lflags being done on board */ - struct device *un_sysfs; -}; - -/************************************************************************ - * Device flag definitions for ch_flags. - ************************************************************************/ -#define CH_PRON 0x0001 /* Printer on string */ -#define CH_OUT 0x0002 /* Dial-out device open */ -#define CH_STOP 0x0004 /* Output is stopped */ -#define CH_STOPI 0x0008 /* Input is stopped */ -#define CH_CD 0x0010 /* Carrier is present */ -#define CH_FCAR 0x0020 /* Carrier forced on */ - -#define CH_RXBLOCK 0x0080 /* Enable rx blocked flag */ -#define CH_WLOW 0x0100 /* Term waiting low event */ -#define CH_WEMPTY 0x0200 /* Term waiting empty event */ -#define CH_RENABLE 0x0400 /* Buffer just emptied */ -#define CH_RACTIVE 0x0800 /* Process active in xxread() */ -#define CH_RWAIT 0x1000 /* Process waiting in xxread() */ -#define CH_BAUD0 0x2000 /* Used for checking B0 transitions */ -#define CH_HANGUP 0x8000 /* Hangup received */ - -/* - * Definitions for ch_sniff_flags - */ -#define SNIFF_OPEN 0x1 -#define SNIFF_WAIT_DATA 0x2 -#define SNIFF_WAIT_SPACE 0x4 - -/************************************************************************ - *** Definitions for Digi ditty(1) command. - ************************************************************************/ - -/************************************************************************ - * This module provides application access to special Digi - * serial line enhancements which are not standard UNIX(tm) features. - ************************************************************************/ - -#if !defined(TIOCMODG) - -#define TIOCMODG (('d'<<8) | 250) /* get modem ctrl state */ -#define TIOCMODS (('d'<<8) | 251) /* set modem ctrl state */ - -#ifndef TIOCM_LE -#define TIOCM_LE 0x01 /* line enable */ -#define TIOCM_DTR 0x02 /* data terminal ready */ -#define TIOCM_RTS 0x04 /* request to send */ -#define TIOCM_ST 0x08 /* secondary transmit */ -#define TIOCM_SR 0x10 /* secondary receive */ -#define TIOCM_CTS 0x20 /* clear to send */ -#define TIOCM_CAR 0x40 /* carrier detect */ -#define TIOCM_RNG 0x80 /* ring indicator */ -#define TIOCM_DSR 0x100 /* data set ready */ -#define TIOCM_RI TIOCM_RNG /* ring (alternate) */ -#define TIOCM_CD TIOCM_CAR /* carrier detect (alt) */ -#endif - -#endif - -#if !defined(TIOCMSET) -#define TIOCMSET (('d'<<8) | 252) /* set modem ctrl state */ -#define TIOCMGET (('d'<<8) | 253) /* set modem ctrl state */ -#endif - -#if !defined(TIOCMBIC) -#define TIOCMBIC (('d'<<8) | 254) /* set modem ctrl state */ -#define TIOCMBIS (('d'<<8) | 255) /* set modem ctrl state */ -#endif - -#if !defined(TIOCSDTR) -#define TIOCSDTR (('e'<<8) | 0) /* set DTR */ -#define TIOCCDTR (('e'<<8) | 1) /* clear DTR */ -#endif - -/************************************************************************ - * Ioctl command arguments for DIGI parameters. - ************************************************************************/ -#define DIGI_GETA (('e'<<8) | 94) /* Read params */ - -#define DIGI_SETA (('e'<<8) | 95) /* Set params */ -#define DIGI_SETAW (('e'<<8) | 96) /* Drain & set params */ -#define DIGI_SETAF (('e'<<8) | 97) /* Drain, flush & set params */ - -#define DIGI_KME (('e'<<8) | 98) /* Read/Write Host */ - /* Adapter Memory */ - -#define DIGI_GETFLOW (('e'<<8) | 99) /* Get startc/stopc flow */ - /* control characters */ -#define DIGI_SETFLOW (('e'<<8) | 100) /* Set startc/stopc flow */ - /* control characters */ -#define DIGI_GETAFLOW (('e'<<8) | 101) /* Get Aux. startc/stopc */ - /* flow control chars */ -#define DIGI_SETAFLOW (('e'<<8) | 102) /* Set Aux. startc/stopc */ - /* flow control chars */ - -#define DIGI_GEDELAY (('d'<<8) | 246) /* Get edelay */ -#define DIGI_SEDELAY (('d'<<8) | 247) /* Set edelay */ - -struct digiflow_t { - unsigned char startc; /* flow cntl start char */ - unsigned char stopc; /* flow cntl stop char */ -}; - -#ifdef FLOW_2200 -#define F2200_GETA (('e'<<8) | 104) /* Get 2x36 flow cntl flags */ -#define F2200_SETAW (('e'<<8) | 105) /* Set 2x36 flow cntl flags */ -#define F2200_MASK 0x03 /* 2200 flow cntl bit mask */ -#define FCNTL_2200 0x01 /* 2x36 terminal flow cntl */ -#define PCNTL_2200 0x02 /* 2x36 printer flow cntl */ -#define F2200_XON 0xf8 -#define P2200_XON 0xf9 -#define F2200_XOFF 0xfa -#define P2200_XOFF 0xfb - -#define FXOFF_MASK 0x03 /* 2200 flow status mask */ -#define RCVD_FXOFF 0x01 /* 2x36 Terminal XOFF rcvd */ -#define RCVD_PXOFF 0x02 /* 2x36 Printer XOFF rcvd */ -#endif - -/************************************************************************ - * Values for digi_flags - ************************************************************************/ -#define DIGI_IXON 0x0001 /* Handle IXON in the FEP */ -#define DIGI_FAST 0x0002 /* Fast baud rates */ -#define RTSPACE 0x0004 /* RTS input flow control */ -#define CTSPACE 0x0008 /* CTS output flow control */ -#define DSRPACE 0x0010 /* DSR output flow control */ -#define DCDPACE 0x0020 /* DCD output flow control */ -#define DTRPACE 0x0040 /* DTR input flow control */ -#define DIGI_COOK 0x0080 /* Cooked processing done in FEP */ -#define DIGI_FORCEDCD 0x0100 /* Force carrier */ -#define DIGI_ALTPIN 0x0200 /* Alternate RJ-45 pin config */ -#define DIGI_AIXON 0x0400 /* Aux flow control in fep */ -#define DIGI_PRINTER 0x0800 /* Hold port open for flow cntrl*/ -#define DIGI_PP_INPUT 0x1000 /* Change parallel port to input*/ -#define DIGI_DTR_TOGGLE 0x2000 /* Support DTR Toggle */ -#define DIGI_422 0x4000 /* for 422/232 selectable panel */ -#define DIGI_RTS_TOGGLE 0x8000 /* Support RTS Toggle */ - -/************************************************************************ - * These options are not supported on the comxi. - ************************************************************************/ -#define DIGI_COMXI (DIGI_FAST|DIGI_COOK|DSRPACE|DCDPACE|DTRPACE) - -#define DIGI_PLEN 28 /* String length */ -#define DIGI_TSIZ 10 /* Terminal string len */ - -/************************************************************************ - * Structure used with ioctl commands for DIGI parameters. - ************************************************************************/ -struct digi_t { - unsigned short digi_flags; /* Flags (see above) */ - unsigned short digi_maxcps; /* Max printer CPS */ - unsigned short digi_maxchar; /* Max chars in print queue */ - unsigned short digi_bufsize; /* Buffer size */ - unsigned char digi_onlen; /* Length of ON string */ - unsigned char digi_offlen; /* Length of OFF string */ - char digi_onstr[DIGI_PLEN]; /* Printer on string */ - char digi_offstr[DIGI_PLEN]; /* Printer off string */ - char digi_term[DIGI_TSIZ]; /* terminal string */ -}; - -/************************************************************************ - * KME definitions and structures. - ************************************************************************/ -#define RW_IDLE 0 /* Operation complete */ -#define RW_READ 1 /* Read Concentrator Memory */ -#define RW_WRITE 2 /* Write Concentrator Memory */ - -struct rw_t { - unsigned char rw_req; /* Request type */ - unsigned char rw_board; /* Host Adapter board number */ - unsigned char rw_conc; /* Concentrator number */ - unsigned char rw_reserved; /* Reserved for expansion */ - unsigned long rw_addr; /* Address in concentrator */ - unsigned short rw_size; /* Read/write request length */ - unsigned char rw_data[128]; /* Data to read/write */ -}; - -/************************************************************************ - * Structure to get driver status information - ************************************************************************/ -struct digi_dinfo { - unsigned long dinfo_nboards; /* # boards configured */ - char dinfo_reserved[12]; /* for future expansion */ - char dinfo_version[16]; /* driver version */ -}; - -#define DIGI_GETDD (('d'<<8) | 248) /* get driver info */ - -/************************************************************************ - * Structure used with ioctl commands for per-board information - * - * physsize and memsize differ when board has "windowed" memory - ************************************************************************/ -struct digi_info { - unsigned long info_bdnum; /* Board number (0 based) */ - unsigned long info_ioport; /* io port address */ - unsigned long info_physaddr; /* memory address */ - unsigned long info_physsize; /* Size of host mem window */ - unsigned long info_memsize; /* Amount of dual-port mem */ - /* on board */ - unsigned short info_bdtype; /* Board type */ - unsigned short info_nports; /* number of ports */ - char info_bdstate; /* board state */ - char info_reserved[7]; /* for future expansion */ -}; - -#define DIGI_GETBD (('d'<<8) | 249) /* get board info */ - -struct digi_stat { - unsigned int info_chan; /* Channel number (0 based) */ - unsigned int info_brd; /* Board number (0 based) */ - unsigned long info_cflag; /* cflag for channel */ - unsigned long info_iflag; /* iflag for channel */ - unsigned long info_oflag; /* oflag for channel */ - unsigned long info_mstat; /* mstat for channel */ - unsigned long info_tx_data; /* tx_data for channel */ - unsigned long info_rx_data; /* rx_data for channel */ - unsigned long info_hflow; /* hflow for channel */ - unsigned long info_reserved[8]; /* for future expansion */ -}; - -#define DIGI_GETSTAT (('d'<<8) | 244) /* get board info */ -/************************************************************************ - * - * Structure used with ioctl commands for per-channel information - * - ************************************************************************/ -struct digi_ch { - unsigned long info_bdnum; /* Board number (0 based) */ - unsigned long info_channel; /* Channel index number */ - unsigned long info_ch_cflag; /* Channel cflag */ - unsigned long info_ch_iflag; /* Channel iflag */ - unsigned long info_ch_oflag; /* Channel oflag */ - unsigned long info_chsize; /* Channel structure size */ - unsigned long info_sleep_stat; /* sleep status */ - dev_t info_dev; /* device number */ - unsigned char info_initstate; /* Channel init state */ - unsigned char info_running; /* Channel running state */ - long reserved[8]; /* reserved for future use */ -}; - -/* -* This structure is used with the DIGI_FEPCMD ioctl to -* tell the driver which port to send the command for. -*/ -struct digi_cmd { - int cmd; - int word; - int ncmds; - int chan; /* channel index (zero based) */ - int bdid; /* board index (zero based) */ -}; - -/* -* info_sleep_stat defines -*/ -#define INFO_RUNWAIT 0x0001 -#define INFO_WOPEN 0x0002 -#define INFO_TTIOW 0x0004 -#define INFO_CH_RWAIT 0x0008 -#define INFO_CH_WEMPTY 0x0010 -#define INFO_CH_WLOW 0x0020 -#define INFO_XXBUF_BUSY 0x0040 - -#define DIGI_GETCH (('d'<<8) | 245) /* get board info */ - -/* Board type definitions */ - -#define SUBTYPE 0007 -#define T_PCXI 0000 -#define T_PCXM 0001 -#define T_PCXE 0002 -#define T_PCXR 0003 -#define T_SP 0004 -#define T_SP_PLUS 0005 -# define T_HERC 0000 -# define T_HOU 0001 -# define T_LON 0002 -# define T_CHA 0003 -#define FAMILY 0070 -#define T_COMXI 0000 -#define T_PCXX 0010 -#define T_CX 0020 -#define T_EPC 0030 -#define T_PCLITE 0040 -#define T_SPXX 0050 -#define T_AVXX 0060 -#define T_DXB 0070 -#define T_A2K_4_8 0070 -#define BUSTYPE 0700 -#define T_ISABUS 0000 -#define T_MCBUS 0100 -#define T_EISABUS 0200 -#define T_PCIBUS 0400 - -/* Board State Definitions */ - -#define BD_RUNNING 0x0 -#define BD_REASON 0x7f -#define BD_NOTFOUND 0x1 -#define BD_NOIOPORT 0x2 -#define BD_NOMEM 0x3 -#define BD_NOBIOS 0x4 -#define BD_NOFEP 0x5 -#define BD_FAILED 0x6 -#define BD_ALLOCATED 0x7 -#define BD_TRIBOOT 0x8 -#define BD_BADKME 0x80 - -#define DIGI_LOOPBACK (('d'<<8) | 252) /* Enable/disable UART */ - /* internal loopback */ -#define DIGI_SPOLL (('d'<<8) | 254) /* change poller rate */ - -#define DIGI_SETCUSTOMBAUD _IOW('e', 106, int) /* Set integer baud rate */ -#define DIGI_GETCUSTOMBAUD _IOR('e', 107, int) /* Get integer baud rate */ -#define DIGI_RESET_PORT (('e'<<8) | 93) /* Reset port */ - -/************************************************************************ - * Channel information structure. - ************************************************************************/ -struct channel_t { - int magic; /* Channel Magic Number */ - struct bs_t __iomem *ch_bs; /* Base structure pointer */ - struct cm_t __iomem *ch_cm; /* Command queue pointer */ - struct board_t *ch_bd; /* Board structure pointer */ - u8 __iomem *ch_vaddr; /* FEP memory origin */ - u8 __iomem *ch_taddr; /* Write buffer origin */ - u8 __iomem *ch_raddr; /* Read buffer origin */ - struct digi_t ch_digi; /* Transparent Print structure */ - struct un_t ch_tun; /* Terminal unit info */ - struct un_t ch_pun; /* Printer unit info */ - - spinlock_t ch_lock; /* provide for serialization */ - wait_queue_head_t ch_flags_wait; - - u32 pscan_state; - u8 pscan_savechar; - - u32 ch_portnum; /* Port number, 0 offset. */ - u32 ch_open_count; /* open count */ - u32 ch_flags; /* Channel flags */ - - u32 ch_cpstime; /* Time for CPS calculations */ - - tcflag_t ch_c_iflag; /* channel iflags */ - tcflag_t ch_c_cflag; /* channel cflags */ - tcflag_t ch_c_oflag; /* channel oflags */ - tcflag_t ch_c_lflag; /* channel lflags */ - - u16 ch_fepiflag; /* FEP tty iflags */ - u16 ch_fepcflag; /* FEP tty cflags */ - u16 ch_fepoflag; /* FEP tty oflags */ - u16 ch_wopen; /* Waiting for open process cnt */ - u16 ch_tstart; /* Transmit buffer start */ - u16 ch_tsize; /* Transmit buffer size */ - u16 ch_rstart; /* Receive buffer start */ - u16 ch_rsize; /* Receive buffer size */ - u16 ch_rdelay; /* Receive delay time */ - - u16 ch_tlw; /* Our currently set low water mark */ - - u16 ch_cook; /* Output character mask */ - - u8 ch_card; /* Card channel is on */ - u8 ch_stopc; /* Stop character */ - u8 ch_startc; /* Start character */ - - u8 ch_mostat; /* FEP output modem status */ - u8 ch_mistat; /* FEP input modem status */ - u8 ch_mforce; /* Modem values to be forced */ - u8 ch_mval; /* Force values */ - u8 ch_fepstopc; /* FEP stop character */ - u8 ch_fepstartc; /* FEP start character */ - - u8 ch_astopc; /* Auxiliary Stop character */ - u8 ch_astartc; /* Auxiliary Start character */ - u8 ch_fepastopc; /* Auxiliary FEP stop char */ - u8 ch_fepastartc; /* Auxiliary FEP start char */ - - u8 ch_hflow; /* FEP hardware handshake */ - u8 ch_dsr; /* stores real dsr value */ - u8 ch_cd; /* stores real cd value */ - u8 ch_tx_win; /* channel tx buffer window */ - u8 ch_rx_win; /* channel rx buffer window */ - uint ch_custom_speed; /* Custom baud, if set */ - uint ch_baud_info; /* Current baud info for /proc output */ - ulong ch_rxcount; /* total of data received so far */ - ulong ch_txcount; /* total of data transmitted so far */ - ulong ch_err_parity; /* Count of parity errors on channel */ - ulong ch_err_frame; /* Count of framing errors on channel */ - ulong ch_err_break; /* Count of breaks on channel */ - ulong ch_err_overrun; /* Count of overruns on channel */ -}; - -/************************************************************************ - * Command structure definition. - ************************************************************************/ -struct cm_t { - unsigned short cm_head; /* Command buffer head offset */ - unsigned short cm_tail; /* Command buffer tail offset */ - unsigned short cm_start; /* start offset of buffer */ - unsigned short cm_max; /* last offset of buffer */ -}; - -/************************************************************************ - * Event structure definition. - ************************************************************************/ -struct ev_t { - unsigned short ev_head; /* Command buffer head offset */ - unsigned short ev_tail; /* Command buffer tail offset */ - unsigned short ev_start; /* start offset of buffer */ - unsigned short ev_max; /* last offset of buffer */ -}; - -/************************************************************************ - * Download buffer structure. - ************************************************************************/ -struct downld_t { - u8 dl_type; /* Header */ - u8 dl_seq; /* Download sequence */ - ushort dl_srev; /* Software revision number */ - ushort dl_lrev; /* Low revision number */ - ushort dl_hrev; /* High revision number */ - ushort dl_seg; /* Start segment address */ - ushort dl_size; /* Number of bytes to download */ - u8 dl_data[1024]; /* Download data */ -}; - -/************************************************************************ - * Per channel buffer structure - ************************************************************************ - * Base Structure Entries Usage Meanings to Host * - * * - * W = read write R = read only * - * C = changed by commands only * - * U = unknown (may be changed w/o notice) * - ************************************************************************/ -struct bs_t { - unsigned short tp_jmp; /* Transmit poll jump */ - unsigned short tc_jmp; /* Cooked procedure jump */ - unsigned short ri_jmp; /* Not currently used */ - unsigned short rp_jmp; /* Receive poll jump */ - - unsigned short tx_seg; /* W Tx segment */ - unsigned short tx_head; /* W Tx buffer head offset */ - unsigned short tx_tail; /* R Tx buffer tail offset */ - unsigned short tx_max; /* W Tx buffer size - 1 */ - - unsigned short rx_seg; /* W Rx segment */ - unsigned short rx_head; /* W Rx buffer head offset */ - unsigned short rx_tail; /* R Rx buffer tail offset */ - unsigned short rx_max; /* W Rx buffer size - 1 */ - - unsigned short tx_lw; /* W Tx buffer low water mark */ - unsigned short rx_lw; /* W Rx buffer low water mark */ - unsigned short rx_hw; /* W Rx buffer high water mark*/ - unsigned short incr; /* W Increment to next channel*/ - - unsigned short fepdev; /* U SCC device base address */ - unsigned short edelay; /* W Exception delay */ - unsigned short blen; /* W Break length */ - unsigned short btime; /* U Break complete time */ - - unsigned short iflag; /* C UNIX input flags */ - unsigned short oflag; /* C UNIX output flags */ - unsigned short cflag; /* C UNIX control flags */ - unsigned short wfill[13]; /* U Reserved for expansion */ - - unsigned char num; /* U Channel number */ - unsigned char ract; /* U Receiver active counter */ - unsigned char bstat; /* U Break status bits */ - unsigned char tbusy; /* W Transmit busy */ - unsigned char iempty; /* W Transmit empty event */ - /* enable */ - unsigned char ilow; /* W Transmit low-water event */ - /* enable */ - unsigned char idata; /* W Receive data interrupt */ - /* enable */ - unsigned char eflag; /* U Host event flags */ - - unsigned char tflag; /* U Transmit flags */ - unsigned char rflag; /* U Receive flags */ - unsigned char xmask; /* U Transmit ready flags */ - unsigned char xval; /* U Transmit ready value */ - unsigned char m_stat; /* RC Modem status bits */ - unsigned char m_change; /* U Modem bits which changed */ - unsigned char m_int; /* W Modem interrupt enable */ - /* bits */ - unsigned char m_last; /* U Last modem status */ - - unsigned char mtran; /* C Unreported modem trans */ - unsigned char orun; /* C Buffer overrun occurred */ - unsigned char astartc; /* W Auxiliary Xon char */ - unsigned char astopc; /* W Auxiliary Xoff char */ - unsigned char startc; /* W Xon character */ - unsigned char stopc; /* W Xoff character */ - unsigned char vnextc; /* W Vnext character */ - unsigned char hflow; /* C Software flow control */ - - unsigned char fillc; /* U Delay Fill character */ - unsigned char ochar; /* U Saved output character */ - unsigned char omask; /* U Output character mask */ - - unsigned char bfill[13]; /* U Reserved for expansion */ - - unsigned char scc[16]; /* U SCC registers */ -}; - -struct cnode { - struct cnode *next; - int type; - int numbrd; - - union { - struct { - char type; /* Board Type */ - long addr; /* Memory Address */ - char *addrstr; /* Memory Address in string */ - long pcibus; /* PCI BUS */ - char *pcibusstr; /* PCI BUS in string */ - long pcislot; /* PCI SLOT */ - char *pcislotstr; /* PCI SLOT in string */ - long nport; /* Number of Ports */ - char *id; /* tty id */ - long start; /* start of tty counting */ - char *method; /* Install method */ - char v_addr; - char v_pcibus; - char v_pcislot; - char v_nport; - char v_id; - char v_start; - char v_method; - char line1; - char line2; - char conc1; /* total concs in line1 */ - char conc2; /* total concs in line2 */ - char module1; /* total modules for line1 */ - char module2; /* total modules for line2 */ - char *status; /* config status */ - char *dimstatus; /* Y/N */ - int status_index; /* field pointer */ - } board; - - struct { - char *cable; - char v_cable; - long speed; - char v_speed; - } line; - - struct { - char type; - char *connect; - long speed; - long nport; - char *id; - char *idstr; - long start; - char v_connect; - char v_speed; - char v_nport; - char v_id; - char v_start; - } conc; - - struct { - char type; - long nport; - char *id; - char *idstr; - long start; - char v_nport; - char v_id; - char v_start; - } module; - - char *ttyname; - char *cuname; - char *printname; - long majornumber; - long altpin; - long ttysize; - long chsize; - long bssize; - long unsize; - long f2size; - long vpixsize; - long useintr; - } u; -}; -#endif diff --git a/drivers/staging/fwserial/fwserial.c b/drivers/staging/fwserial/fwserial.c index b676c48..e481d32 100644 --- a/drivers/staging/fwserial/fwserial.c +++ b/drivers/staging/fwserial/fwserial.c @@ -828,7 +828,7 @@ static void fwtty_write_xchar(struct fwtty_port *port, char ch) rcu_read_unlock(); } -struct fwtty_port *fwtty_port_get(unsigned index) +static struct fwtty_port *fwtty_port_get(unsigned index) { struct fwtty_port *port; @@ -842,7 +842,6 @@ struct fwtty_port *fwtty_port_get(unsigned index) mutex_unlock(&port_table_lock); return port; } -EXPORT_SYMBOL(fwtty_port_get); static int fwtty_ports_add(struct fw_serial *serial) { diff --git a/drivers/staging/fwserial/fwserial.h b/drivers/staging/fwserial/fwserial.h index e13fe33..6fa9365 100644 --- a/drivers/staging/fwserial/fwserial.h +++ b/drivers/staging/fwserial/fwserial.h @@ -341,7 +341,6 @@ static const char loop_dev_name[] = "fwloop"; extern struct tty_driver *fwtty_driver; -struct fwtty_port *fwtty_port_get(unsigned index); /* * Returns the max send async payload size in bytes based on the unit device * link speed. Self-limiting asynchronous bandwidth (via reducing the payload) diff --git a/drivers/staging/iio/Documentation/sysfs-bus-iio-light b/drivers/staging/iio/Documentation/sysfs-bus-iio-light index 17e5c9c..7c7cd84 100644 --- a/drivers/staging/iio/Documentation/sysfs-bus-iio-light +++ b/drivers/staging/iio/Documentation/sysfs-bus-iio-light @@ -1,31 +1,3 @@ - -What: /sys/bus/iio/devices/device[n]/range -KernelVersion: 2.6.37 -Contact: linux-iio@vger.kernel.org -Description: - Hardware dependent ADC Full Scale Range used for some ambient - light sensors in calculating lux. - -What: /sys/bus/iio/devices/device[n]/range_available -KernelVersion: 2.6.37 -Contact: linux-iio@vger.kernel.org -Description: - Hardware dependent supported vales for ADC Full Scale Range. - -What: /sys/bus/iio/devices/device[n]/adc_resolution -KernelVersion: 2.6.37 -Contact: linux-iio@vger.kernel.org -Description: - Hardware dependent ADC resolution of the ambient light sensor - used in calculating the lux. - -What: /sys/bus/iio/devices/device[n]/adc_resolution_available -KernelVersion: 2.6.37 -Contact: linux-iio@vger.kernel.org -Description: - Hardware dependent list of possible values supported for the - adc_resolution of the given sensor. - What: /sys/bus/iio/devices/device[n]/in_illuminance0[_input|_raw] KernelVersion: 2.6.35 Contact: linux-iio@vger.kernel.org diff --git a/drivers/staging/iio/adc/ad7192.c b/drivers/staging/iio/adc/ad7192.c index 9221103..92f2b72 100644 --- a/drivers/staging/iio/adc/ad7192.c +++ b/drivers/staging/iio/adc/ad7192.c @@ -236,7 +236,7 @@ static int ad7192_setup(struct ad7192_state *st, st->mclk = pdata->ext_clk_hz; else st->mclk = AD7192_INT_FREQ_MHZ; - break; + break; default: ret = -EINVAL; goto out; diff --git a/drivers/staging/iio/cdc/ad7150.c b/drivers/staging/iio/cdc/ad7150.c index e8d0ff2..f6b9a10 100644 --- a/drivers/staging/iio/cdc/ad7150.c +++ b/drivers/staging/iio/cdc/ad7150.c @@ -21,8 +21,8 @@ */ #define AD7150_STATUS 0 -#define AD7150_STATUS_OUT1 (1 << 3) -#define AD7150_STATUS_OUT2 (1 << 5) +#define AD7150_STATUS_OUT1 BIT(3) +#define AD7150_STATUS_OUT2 BIT(5) #define AD7150_CH1_DATA_HIGH 1 #define AD7150_CH2_DATA_HIGH 3 #define AD7150_CH1_AVG_HIGH 5 @@ -36,7 +36,7 @@ #define AD7150_CH2_TIMEOUT 13 #define AD7150_CH2_SETUP 14 #define AD7150_CFG 15 -#define AD7150_CFG_FIX (1 << 7) +#define AD7150_CFG_FIX BIT(7) #define AD7150_PD_TIMER 16 #define AD7150_CH1_CAPDAC 17 #define AD7150_CH2_CAPDAC 18 @@ -160,8 +160,9 @@ static int ad7150_read_event_config(struct iio_dev *indio_dev, /* lock should be held */ static int ad7150_write_event_params(struct iio_dev *indio_dev, - unsigned int chan, enum iio_event_type type, - enum iio_event_direction dir) + unsigned int chan, + enum iio_event_type type, + enum iio_event_direction dir) { int ret; u16 value; @@ -209,8 +210,9 @@ static int ad7150_write_event_params(struct iio_dev *indio_dev, } static int ad7150_write_event_config(struct iio_dev *indio_dev, - const struct iio_chan_spec *chan, enum iio_event_type type, - enum iio_event_direction dir, int state) + const struct iio_chan_spec *chan, + enum iio_event_type type, + enum iio_event_direction dir, int state) { u8 thresh_type, cfg, adaptive; int ret; @@ -302,11 +304,11 @@ static int ad7150_read_event_value(struct iio_dev *indio_dev, } static int ad7150_write_event_value(struct iio_dev *indio_dev, - const struct iio_chan_spec *chan, - enum iio_event_type type, - enum iio_event_direction dir, - enum iio_event_info info, - int val, int val2) + const struct iio_chan_spec *chan, + enum iio_event_type type, + enum iio_event_direction dir, + enum iio_event_info info, + int val, int val2) { int ret; struct ad7150_chip_info *chip = iio_priv(indio_dev); @@ -365,9 +367,9 @@ static ssize_t ad7150_show_timeout(struct device *dev, } static ssize_t ad7150_store_timeout(struct device *dev, - struct device_attribute *attr, - const char *buf, - size_t len) + struct device_attribute *attr, + const char *buf, + size_t len) { struct iio_dev *indio_dev = dev_to_iio_dev(dev); struct ad7150_chip_info *chip = iio_priv(indio_dev); @@ -580,7 +582,7 @@ static const struct iio_info ad7150_info = { */ static int ad7150_probe(struct i2c_client *client, - const struct i2c_device_id *id) + const struct i2c_device_id *id) { int ret; struct ad7150_chip_info *chip; diff --git a/drivers/staging/lustre/include/linux/libcfs/libcfs.h b/drivers/staging/lustre/include/linux/libcfs/libcfs.h index 0d8a91e..dc9b88f 100644 --- a/drivers/staging/lustre/include/linux/libcfs/libcfs.h +++ b/drivers/staging/lustre/include/linux/libcfs/libcfs.h @@ -77,7 +77,7 @@ struct cfs_psdev_ops { int (*p_close)(unsigned long, void *); int (*p_read)(struct cfs_psdev_file *, char *, unsigned long); int (*p_write)(struct cfs_psdev_file *, char *, unsigned long); - int (*p_ioctl)(struct cfs_psdev_file *, unsigned long, void *); + int (*p_ioctl)(struct cfs_psdev_file *, unsigned long, void __user *); }; /* @@ -90,7 +90,6 @@ void cfs_enter_debugger(void); * Defined by platform */ int unshare_fs_struct(void); -sigset_t cfs_get_blocked_sigs(void); sigset_t cfs_block_allsigs(void); sigset_t cfs_block_sigs(unsigned long sigs); sigset_t cfs_block_sigsinv(unsigned long sigs); @@ -115,7 +114,6 @@ void cfs_get_random_bytes(void *buf, int size); #include "libcfs_prim.h" #include "libcfs_time.h" #include "libcfs_string.h" -#include "libcfs_kernelcomm.h" #include "libcfs_workitem.h" #include "libcfs_hash.h" #include "libcfs_fail.h" diff --git a/drivers/staging/lustre/include/linux/libcfs/libcfs_debug.h b/drivers/staging/lustre/include/linux/libcfs/libcfs_debug.h index a1787bb..98430e7 100644 --- a/drivers/staging/lustre/include/linux/libcfs/libcfs_debug.h +++ b/drivers/staging/lustre/include/linux/libcfs/libcfs_debug.h @@ -106,7 +106,7 @@ struct ptldebug_header { #define S_LOV 0x00020000 #define S_LQUOTA 0x00040000 #define S_OSD 0x00080000 -/* unused */ +#define S_LFSCK 0x00100000 /* unused */ /* unused */ #define S_LMV 0x00800000 /* b_new_cmd */ diff --git a/drivers/staging/lustre/include/linux/libcfs/libcfs_ioctl.h b/drivers/staging/lustre/include/linux/libcfs/libcfs_ioctl.h index 485ab26..e4463ad 100644 --- a/drivers/staging/lustre/include/linux/libcfs/libcfs_ioctl.h +++ b/drivers/staging/lustre/include/linux/libcfs/libcfs_ioctl.h @@ -61,9 +61,9 @@ struct libcfs_ioctl_data { char *ioc_inlbuf2; __u32 ioc_plen1; /* buffers in userspace */ - char *ioc_pbuf1; + void __user *ioc_pbuf1; __u32 ioc_plen2; /* buffers in userspace */ - char *ioc_pbuf2; + void __user *ioc_pbuf2; char ioc_bulk[0]; }; @@ -102,7 +102,6 @@ struct libcfs_ioctl_handler { /* FIXME check conflict with lustre_lib.h */ #define LIBCFS_IOC_DEBUG_MASK _IOWR('f', 250, long) -/* ioctls for manipulating snapshots 30- */ #define IOC_LIBCFS_TYPE 'e' #define IOC_LIBCFS_MIN_NR 30 /* libcfs ioctls */ @@ -118,12 +117,12 @@ struct libcfs_ioctl_handler { #define IOC_LIBCFS_GET_ROUTE _IOWR('e', 54, long) #define IOC_LIBCFS_NOTIFY_ROUTER _IOWR('e', 55, long) #define IOC_LIBCFS_UNCONFIGURE _IOWR('e', 56, long) -#define IOC_LIBCFS_PORTALS_COMPATIBILITY _IOWR('e', 57, long) +/* #define IOC_LIBCFS_PORTALS_COMPATIBILITY _IOWR('e', 57, long) */ #define IOC_LIBCFS_LNET_DIST _IOWR('e', 58, long) #define IOC_LIBCFS_CONFIGURE _IOWR('e', 59, long) #define IOC_LIBCFS_TESTPROTOCOMPAT _IOWR('e', 60, long) #define IOC_LIBCFS_PING _IOWR('e', 61, long) -#define IOC_LIBCFS_DEBUG_PEER _IOWR('e', 62, long) +/* #define IOC_LIBCFS_DEBUG_PEER _IOWR('e', 62, long) */ #define IOC_LIBCFS_LNETST _IOWR('e', 63, long) /* lnd ioctls */ #define IOC_LIBCFS_REGISTER_MYNID _IOWR('e', 70, long) @@ -207,7 +206,7 @@ static inline int libcfs_ioctl_is_invalid(struct libcfs_ioctl_data *data) int libcfs_register_ioctl(struct libcfs_ioctl_handler *hand); int libcfs_deregister_ioctl(struct libcfs_ioctl_handler *hand); -int libcfs_ioctl_getdata(char *buf, char *end, void *arg); -int libcfs_ioctl_popdata(void *arg, void *buf, int size); +int libcfs_ioctl_getdata(char *buf, char *end, void __user *arg); +int libcfs_ioctl_popdata(void __user *arg, void *buf, int size); #endif /* __LIBCFS_IOCTL_H__ */ diff --git a/drivers/staging/lustre/include/linux/libcfs/libcfs_private.h b/drivers/staging/lustre/include/linux/libcfs/libcfs_private.h index a80d993..dab4862 100644 --- a/drivers/staging/lustre/include/linux/libcfs/libcfs_private.h +++ b/drivers/staging/lustre/include/linux/libcfs/libcfs_private.h @@ -387,11 +387,6 @@ int cfs_percpt_atomic_summary(atomic_t **refs); * Support for temporary event tracing with minimal Heisenberg effect. * -------------------------------------------------------------------- */ -struct libcfs_device_userstate { - int ldu_memhog_pages; - struct page *ldu_memhog_root_page; -}; - #define MKSTR(ptr) ((ptr)) ? (ptr) : "" static inline int cfs_size_round4(int val) diff --git a/drivers/staging/lustre/include/linux/libcfs/libcfs_string.h b/drivers/staging/lustre/include/linux/libcfs/libcfs_string.h index d8d2e7d..e02cde5 100644 --- a/drivers/staging/lustre/include/linux/libcfs/libcfs_string.h +++ b/drivers/staging/lustre/include/linux/libcfs/libcfs_string.h @@ -44,8 +44,6 @@ #define __LIBCFS_STRING_H__ /* libcfs_string.c */ -/* string comparison ignoring case */ -int cfs_strncasecmp(const char *s1, const char *s2, size_t n); /* Convert a text string to a bitmask */ int cfs_str2mask(const char *str, const char *(*bit2str)(int bit), int *oldmask, int minmask, int allmask); diff --git a/drivers/staging/lustre/include/linux/lnet/api.h b/drivers/staging/lustre/include/linux/lnet/api.h index 75285fd..fa5fad3 100644 --- a/drivers/staging/lustre/include/linux/lnet/api.h +++ b/drivers/staging/lustre/include/linux/lnet/api.h @@ -197,6 +197,7 @@ int LNetGet(lnet_nid_t self, int LNetSetLazyPortal(int portal); int LNetClearLazyPortal(int portal); int LNetCtl(unsigned int cmd, void *arg); +void LNetDebugPeer(lnet_process_id_t id); /** @} lnet_misc */ diff --git a/drivers/staging/lustre/include/linux/lnet/lib-lnet.h b/drivers/staging/lustre/include/linux/lnet/lib-lnet.h index b67a660..40acddd 100644 --- a/drivers/staging/lustre/include/linux/lnet/lib-lnet.h +++ b/drivers/staging/lustre/include/linux/lnet/lib-lnet.h @@ -662,8 +662,6 @@ void lnet_swap_pinginfo(lnet_ping_info_t *info); int lnet_ping_target_init(void); void lnet_ping_target_fini(void); -int lnet_ping(lnet_process_id_t id, int timeout_ms, - lnet_process_id_t *ids, int n_ids); int lnet_parse_ip2nets(char **networksp, char *ip2nets); int lnet_parse_routes(char *route_str, int *im_a_router); diff --git a/drivers/staging/lustre/include/linux/lnet/lnetst.h b/drivers/staging/lustre/include/linux/lnet/lnetst.h index fd1e0fd..4170445 100644 --- a/drivers/staging/lustre/include/linux/lnet/lnetst.h +++ b/drivers/staging/lustre/include/linux/lnet/lnetst.h @@ -245,20 +245,20 @@ typedef struct { int lstio_ses_force; /* IN: force create ? */ /** IN: session features */ unsigned lstio_ses_feats; - lst_sid_t *lstio_ses_idp; /* OUT: session id */ + lst_sid_t __user *lstio_ses_idp; /* OUT: session id */ int lstio_ses_nmlen; /* IN: name length */ - char *lstio_ses_namep; /* IN: session name */ + char __user *lstio_ses_namep; /* IN: session name */ } lstio_session_new_args_t; /* query current session */ typedef struct { - lst_sid_t *lstio_ses_idp; /* OUT: session id */ - int *lstio_ses_keyp; /* OUT: local key */ + lst_sid_t __user *lstio_ses_idp; /* OUT: session id */ + int __user *lstio_ses_keyp; /* OUT: local key */ /** OUT: session features */ - unsigned *lstio_ses_featp; - lstcon_ndlist_ent_t *lstio_ses_ndinfo; /* OUT: */ + unsigned __user *lstio_ses_featp; + lstcon_ndlist_ent_t __user *lstio_ses_ndinfo; /* OUT: */ int lstio_ses_nmlen; /* IN: name length */ - char *lstio_ses_namep; /* OUT: session name */ + char __user *lstio_ses_namep; /* OUT: session name */ } lstio_session_info_args_t; /* delete a session */ @@ -283,26 +283,26 @@ typedef struct { int lstio_dbg_timeout; /* IN: timeout of debug */ int lstio_dbg_nmlen; /* IN: len of name */ - char *lstio_dbg_namep; /* IN: name of + char __user *lstio_dbg_namep; /* IN: name of group|batch */ int lstio_dbg_count; /* IN: # of test nodes to debug */ - lnet_process_id_t *lstio_dbg_idsp; /* IN: id of test + lnet_process_id_t __user *lstio_dbg_idsp; /* IN: id of test nodes */ - struct list_head *lstio_dbg_resultp; /* OUT: list head of + struct list_head __user *lstio_dbg_resultp; /* OUT: list head of result buffer */ } lstio_debug_args_t; typedef struct { - int lstio_grp_key; /* IN: session key */ - int lstio_grp_nmlen; /* IN: name length */ - char *lstio_grp_namep; /* IN: group name */ + int lstio_grp_key; /* IN: session key */ + int lstio_grp_nmlen; /* IN: name length */ + char __user *lstio_grp_namep; /* IN: group name */ } lstio_group_add_args_t; typedef struct { - int lstio_grp_key; /* IN: session key */ - int lstio_grp_nmlen; /* IN: name length */ - char *lstio_grp_namep; /* IN: group name */ + int lstio_grp_key; /* IN: session key */ + int lstio_grp_nmlen; /* IN: name length */ + char __user *lstio_grp_namep; /* IN: group name */ } lstio_group_del_args_t; #define LST_GROUP_CLEAN 1 /* remove inactive nodes in the group */ @@ -315,22 +315,22 @@ typedef struct { int lstio_grp_opc; /* IN: OPC */ int lstio_grp_args; /* IN: arguments */ int lstio_grp_nmlen; /* IN: name length */ - char *lstio_grp_namep; /* IN: group name */ + char __user *lstio_grp_namep; /* IN: group name */ int lstio_grp_count; /* IN: # of nodes id */ - lnet_process_id_t *lstio_grp_idsp; /* IN: array of nodes */ - struct list_head *lstio_grp_resultp; /* OUT: list head of + lnet_process_id_t __user *lstio_grp_idsp; /* IN: array of nodes */ + struct list_head __user *lstio_grp_resultp; /* OUT: list head of result buffer */ } lstio_group_update_args_t; typedef struct { int lstio_grp_key; /* IN: session key */ int lstio_grp_nmlen; /* IN: name length */ - char *lstio_grp_namep; /* IN: group name */ + char __user *lstio_grp_namep; /* IN: group name */ int lstio_grp_count; /* IN: # of nodes */ /** OUT: session features */ - unsigned *lstio_grp_featp; - lnet_process_id_t *lstio_grp_idsp; /* IN: nodes */ - struct list_head *lstio_grp_resultp; /* OUT: list head of + unsigned __user *lstio_grp_featp; + lnet_process_id_t __user *lstio_grp_idsp; /* IN: nodes */ + struct list_head __user *lstio_grp_resultp; /* OUT: list head of result buffer */ } lstio_group_nodes_args_t; @@ -338,18 +338,18 @@ typedef struct { int lstio_grp_key; /* IN: session key */ int lstio_grp_idx; /* IN: group idx */ int lstio_grp_nmlen; /* IN: name len */ - char *lstio_grp_namep; /* OUT: name */ + char __user *lstio_grp_namep; /* OUT: name */ } lstio_group_list_args_t; typedef struct { int lstio_grp_key; /* IN: session key */ int lstio_grp_nmlen; /* IN: name len */ - char *lstio_grp_namep; /* IN: name */ - lstcon_ndlist_ent_t *lstio_grp_entp; /* OUT: description of + char __user *lstio_grp_namep; /* IN: name */ + lstcon_ndlist_ent_t __user *lstio_grp_entp; /* OUT: description of group */ - int *lstio_grp_idxp; /* IN/OUT: node index */ - int *lstio_grp_ndentp; /* IN/OUT: # of nodent */ - lstcon_node_ent_t *lstio_grp_dentsp; /* OUT: nodent array */ + int __user *lstio_grp_idxp; /* IN/OUT: node index */ + int __user *lstio_grp_ndentp; /* IN/OUT: # of nodent */ + lstcon_node_ent_t __user *lstio_grp_dentsp; /* OUT: nodent array */ } lstio_group_info_args_t; #define LST_DEFAULT_BATCH "batch" /* default batch name */ @@ -357,13 +357,13 @@ typedef struct { typedef struct { int lstio_bat_key; /* IN: session key */ int lstio_bat_nmlen; /* IN: name length */ - char *lstio_bat_namep; /* IN: batch name */ + char __user *lstio_bat_namep; /* IN: batch name */ } lstio_batch_add_args_t; typedef struct { int lstio_bat_key; /* IN: session key */ int lstio_bat_nmlen; /* IN: name length */ - char *lstio_bat_namep; /* IN: batch name */ + char __user *lstio_bat_namep; /* IN: batch name */ } lstio_batch_del_args_t; typedef struct { @@ -371,8 +371,8 @@ typedef struct { int lstio_bat_timeout; /* IN: timeout for the batch */ int lstio_bat_nmlen; /* IN: name length */ - char *lstio_bat_namep; /* IN: batch name */ - struct list_head *lstio_bat_resultp; /* OUT: list head of + char __user *lstio_bat_namep; /* IN: batch name */ + struct list_head __user *lstio_bat_resultp; /* OUT: list head of result buffer */ } lstio_batch_run_args_t; @@ -381,8 +381,8 @@ typedef struct { int lstio_bat_force; /* IN: abort unfinished test RPC */ int lstio_bat_nmlen; /* IN: name length */ - char *lstio_bat_namep; /* IN: batch name */ - struct list_head *lstio_bat_resultp; /* OUT: list head of + char __user *lstio_bat_namep; /* IN: batch name */ + struct list_head __user *lstio_bat_resultp; /* OUT: list head of result buffer */ } lstio_batch_stop_args_t; @@ -394,8 +394,8 @@ typedef struct { int lstio_bat_timeout; /* IN: timeout for waiting */ int lstio_bat_nmlen; /* IN: name length */ - char *lstio_bat_namep; /* IN: batch name */ - struct list_head *lstio_bat_resultp; /* OUT: list head of + char __user *lstio_bat_namep; /* IN: batch name */ + struct list_head __user *lstio_bat_resultp; /* OUT: list head of result buffer */ } lstio_batch_query_args_t; @@ -403,21 +403,21 @@ typedef struct { int lstio_bat_key; /* IN: session key */ int lstio_bat_idx; /* IN: index */ int lstio_bat_nmlen; /* IN: name length */ - char *lstio_bat_namep; /* IN: batch name */ + char __user *lstio_bat_namep; /* IN: batch name */ } lstio_batch_list_args_t; typedef struct { int lstio_bat_key; /* IN: session key */ int lstio_bat_nmlen; /* IN: name length */ - char *lstio_bat_namep; /* IN: name */ + char __user *lstio_bat_namep; /* IN: name */ int lstio_bat_server; /* IN: query server or not */ int lstio_bat_testidx; /* IN: test index */ - lstcon_test_batch_ent_t *lstio_bat_entp; /* OUT: batch ent */ + lstcon_test_batch_ent_t __user *lstio_bat_entp; /* OUT: batch ent */ - int *lstio_bat_idxp; /* IN/OUT: index of node */ - int *lstio_bat_ndentp; /* IN/OUT: # of nodent */ - lstcon_node_ent_t *lstio_bat_dentsp; /* array of nodent */ + int __user *lstio_bat_idxp; /* IN/OUT: index of node */ + int __user *lstio_bat_ndentp; /* IN/OUT: # of nodent */ + lstcon_node_ent_t __user *lstio_bat_dentsp; /* array of nodent */ } lstio_batch_info_args_t; /* add stat in session */ @@ -427,10 +427,10 @@ typedef struct { stat request */ int lstio_sta_nmlen; /* IN: group name length */ - char *lstio_sta_namep; /* IN: group name */ + char __user *lstio_sta_namep; /* IN: group name */ int lstio_sta_count; /* IN: # of pid */ - lnet_process_id_t *lstio_sta_idsp; /* IN: pid */ - struct list_head *lstio_sta_resultp; /* OUT: list head of + lnet_process_id_t __user *lstio_sta_idsp; /* IN: pid */ + struct list_head __user *lstio_sta_resultp; /* OUT: list head of result buffer */ } lstio_stat_args_t; @@ -445,7 +445,7 @@ typedef enum { typedef struct { int lstio_tes_key; /* IN: session key */ int lstio_tes_bat_nmlen; /* IN: batch name len */ - char *lstio_tes_bat_name; /* IN: batch name */ + char __user *lstio_tes_bat_name; /* IN: batch name */ int lstio_tes_type; /* IN: test type */ int lstio_tes_oneside; /* IN: one sided test */ int lstio_tes_loop; /* IN: loop count */ @@ -457,20 +457,20 @@ typedef struct { destination groups */ int lstio_tes_sgrp_nmlen; /* IN: source group name length */ - char *lstio_tes_sgrp_name; /* IN: group name */ + char __user *lstio_tes_sgrp_name; /* IN: group name */ int lstio_tes_dgrp_nmlen; /* IN: destination group name length */ - char *lstio_tes_dgrp_name; /* IN: group name */ + char __user *lstio_tes_dgrp_name; /* IN: group name */ int lstio_tes_param_len; /* IN: param buffer len */ - void *lstio_tes_param; /* IN: parameter for specified + void __user *lstio_tes_param; /* IN: parameter for specified test: lstio_bulk_param_t, lstio_ping_param_t, ... more */ - int *lstio_tes_retp; /* OUT: private returned + int __user *lstio_tes_retp; /* OUT: private returned value */ - struct list_head *lstio_tes_resultp; /* OUT: list head of + struct list_head __user *lstio_tes_resultp;/* OUT: list head of result buffer */ } lstio_test_args_t; diff --git a/drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd_cb.c b/drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd_cb.c index c7b9ccb..176c79b 100644 --- a/drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd_cb.c +++ b/drivers/staging/lustre/lnet/klnds/o2iblnd/o2iblnd_cb.c @@ -750,8 +750,7 @@ kiblnd_setup_rd_kiov(lnet_ni_t *ni, kib_tx_t *tx, kib_rdma_desc_t *rd, static int kiblnd_post_tx_locked(kib_conn_t *conn, kib_tx_t *tx, int credit) - __releases(conn->ibc_lock) - __acquires(conn->ibc_lock) + __must_hold(&conn->ibc_lock) { kib_msg_t *msg = tx->tx_msg; kib_peer_t *peer = conn->ibc_peer; diff --git a/drivers/staging/lustre/lnet/klnds/socklnd/socklnd_cb.c b/drivers/staging/lustre/lnet/klnds/socklnd/socklnd_cb.c index 477b385..a0955d2 100644 --- a/drivers/staging/lustre/lnet/klnds/socklnd/socklnd_cb.c +++ b/drivers/staging/lustre/lnet/klnds/socklnd/socklnd_cb.c @@ -2336,6 +2336,7 @@ ksocknal_flush_stale_txs(ksock_peer_t *peer) static int ksocknal_send_keepalive_locked(ksock_peer_t *peer) + __must_hold(&ksocknal_data.ksnd_global_lock) { ksock_sched_t *sched; ksock_conn_t *conn; diff --git a/drivers/staging/lustre/lnet/lnet/api-ni.c b/drivers/staging/lustre/lnet/lnet/api-ni.c index 362282f..d33fbdf 100644 --- a/drivers/staging/lustre/lnet/lnet/api-ni.c +++ b/drivers/staging/lustre/lnet/lnet/api-ni.c @@ -61,6 +61,9 @@ static int rnet_htable_size = LNET_REMOTE_NETS_HASH_DEFAULT; module_param(rnet_htable_size, int, 0444); MODULE_PARM_DESC(rnet_htable_size, "size of remote network hash table"); +static int lnet_ping(lnet_process_id_t id, int timeout_ms, + lnet_process_id_t __user *ids, int n_ids); + static char * lnet_get_routes(void) { @@ -1313,17 +1316,8 @@ LNetNIFini(void) EXPORT_SYMBOL(LNetNIFini); /** - * This is an ugly hack to export IOC_LIBCFS_DEBUG_PEER and - * IOC_LIBCFS_PORTALS_COMPATIBILITY commands to users, by tweaking the LNet - * internal ioctl handler. - * - * IOC_LIBCFS_PORTALS_COMPATIBILITY is now deprecated, don't use it. + * LNet ioctl handler. * - * \param cmd IOC_LIBCFS_DEBUG_PEER to print debugging data about a peer. - * The data will be printed to system console. Don't use it excessively. - * \param arg A pointer to lnet_process_id_t, process ID of the peer. - * - * \return Always return 0 when called by users directly (i.e., not via ioctl). */ int LNetCtl(unsigned int cmd, void *arg) @@ -1364,10 +1358,6 @@ LNetCtl(unsigned int cmd, void *arg) return lnet_notify(NULL, data->ioc_nid, data->ioc_flags, jiffies - secs_passed * HZ); - case IOC_LIBCFS_PORTALS_COMPATIBILITY: - /* This can be removed once lustre stops calling it */ - return 0; - case IOC_LIBCFS_LNET_DIST: rc = LNetDist(data->ioc_nid, &data->ioc_nid, &data->ioc_u32[1]); if (rc < 0 && rc != -EHOSTUNREACH) @@ -1386,36 +1376,13 @@ LNetCtl(unsigned int cmd, void *arg) id.nid = data->ioc_nid; id.pid = data->ioc_u32[0]; rc = lnet_ping(id, data->ioc_u32[1], /* timeout */ - (lnet_process_id_t *)data->ioc_pbuf1, + data->ioc_pbuf1, data->ioc_plen1/sizeof(lnet_process_id_t)); if (rc < 0) return rc; data->ioc_count = rc; return 0; - case IOC_LIBCFS_DEBUG_PEER: { - /* CAVEAT EMPTOR: this one designed for calling directly; not - * via an ioctl */ - id = *((lnet_process_id_t *) arg); - - lnet_debug_peer(id.nid); - - ni = lnet_net2ni(LNET_NIDNET(id.nid)); - if (ni == NULL) { - CDEBUG(D_WARNING, "No NI for %s\n", libcfs_id2str(id)); - } else { - if (ni->ni_lnd->lnd_ctl == NULL) { - CDEBUG(D_WARNING, "No ctl for %s\n", - libcfs_id2str(id)); - } else { - (void)ni->ni_lnd->lnd_ctl(ni, cmd, arg); - } - - lnet_ni_decref(ni); - } - return 0; - } - default: ni = lnet_net2ni(data->ioc_net); if (ni == NULL) @@ -1433,6 +1400,12 @@ LNetCtl(unsigned int cmd, void *arg) } EXPORT_SYMBOL(LNetCtl); +void LNetDebugPeer(lnet_process_id_t id) +{ + lnet_debug_peer(id.nid); +} +EXPORT_SYMBOL(LNetDebugPeer); + /** * Retrieve the lnet_process_id_t ID of LNet interface at \a index. Note that * all interfaces share a same PID, as requested by LNetNIInit(). @@ -1672,8 +1645,8 @@ lnet_ping_target_fini(void) cfs_restore_sigs(blocked); } -int -lnet_ping(lnet_process_id_t id, int timeout_ms, lnet_process_id_t *ids, int n_ids) +static int lnet_ping(lnet_process_id_t id, int timeout_ms, + lnet_process_id_t __user *ids, int n_ids) { lnet_handle_eq_t eqh; lnet_handle_md_t mdh; diff --git a/drivers/staging/lustre/lnet/lnet/config.c b/drivers/staging/lustre/lnet/lnet/config.c index 284a3c2..74d644d 100644 --- a/drivers/staging/lustre/lnet/lnet/config.c +++ b/drivers/staging/lustre/lnet/lnet/config.c @@ -217,12 +217,16 @@ lnet_parse_networks(struct list_head *nilist, char *networks) int niface; int rc; - /* NB we don't check interface conflicts here; it's the LNDs - * responsibility (if it cares at all) */ + /* + * NB we don't check interface conflicts here; it's the LNDs + * responsibility (if it cares at all) + */ if (square != NULL && (comma == NULL || square < comma)) { - /* i.e: o2ib0(ib0)[1,2], number between square - * brackets are CPTs this NI needs to be bond */ + /* + * i.e: o2ib0(ib0)[1,2], number between square + * brackets are CPTs this NI needs to be bond + */ if (bracket != NULL && bracket > square) { tmp = square; goto failed_syntax; @@ -609,8 +613,10 @@ lnet_parse_priority(char *str, unsigned int *priority, char **token) len = strlen(sep + 1); if ((sscanf((sep+1), "%u%n", priority, &nob) < 1) || (len != nob)) { - /* Update the caller's token pointer so it treats the found - priority as the token to report in the error message. */ + /* + * Update the caller's token pointer so it treats the found + * priority as the token to report in the error message. + */ *token += sep - str + 1; return -1; } diff --git a/drivers/staging/lustre/lnet/selftest/conrpc.c b/drivers/staging/lustre/lnet/selftest/conrpc.c index 1066c70..15a61de 100644 --- a/drivers/staging/lustre/lnet/selftest/conrpc.c +++ b/drivers/staging/lustre/lnet/selftest/conrpc.c @@ -466,11 +466,11 @@ lstcon_rpc_trans_stat(lstcon_rpc_trans_t *trans, lstcon_trans_stat_t *stat) int lstcon_rpc_trans_interpreter(lstcon_rpc_trans_t *trans, - struct list_head *head_up, + struct list_head __user *head_up, lstcon_rpc_readent_func_t readent) { struct list_head tmp; - struct list_head *next; + struct list_head __user *next; lstcon_rpc_ent_t *ent; srpc_generic_reply_t *rep; lstcon_rpc_t *crpc; diff --git a/drivers/staging/lustre/lnet/selftest/conrpc.h b/drivers/staging/lustre/lnet/selftest/conrpc.h index 95c832f..d2133bc 100644 --- a/drivers/staging/lustre/lnet/selftest/conrpc.h +++ b/drivers/staging/lustre/lnet/selftest/conrpc.h @@ -106,7 +106,8 @@ typedef struct lstcon_rpc_trans { #define LST_TRANS_STATQRY 0x21 typedef int (*lstcon_rpc_cond_func_t)(int, struct lstcon_node *, void *); -typedef int (*lstcon_rpc_readent_func_t)(int, srpc_msg_t *, lstcon_rpc_ent_t *); +typedef int (*lstcon_rpc_readent_func_t)(int, srpc_msg_t *, + lstcon_rpc_ent_t __user *); int lstcon_sesrpc_prep(struct lstcon_node *nd, int transop, unsigned version, lstcon_rpc_t **crpc); @@ -128,7 +129,7 @@ int lstcon_rpc_trans_ndlist(struct list_head *ndlist, void lstcon_rpc_trans_stat(lstcon_rpc_trans_t *trans, lstcon_trans_stat_t *stat); int lstcon_rpc_trans_interpreter(lstcon_rpc_trans_t *trans, - struct list_head *head_up, + struct list_head __user *head_up, lstcon_rpc_readent_func_t readent); void lstcon_rpc_trans_abort(lstcon_rpc_trans_t *trans, int error); void lstcon_rpc_trans_destroy(lstcon_rpc_trans_t *trans); diff --git a/drivers/staging/lustre/lnet/selftest/console.c b/drivers/staging/lustre/lnet/selftest/console.c index 5619fc4..366211e 100644 --- a/drivers/staging/lustre/lnet/selftest/console.c +++ b/drivers/staging/lustre/lnet/selftest/console.c @@ -363,7 +363,7 @@ lstcon_sesrpc_condition(int transop, lstcon_node_t *nd, void *arg) static int lstcon_sesrpc_readent(int transop, srpc_msg_t *msg, - lstcon_rpc_ent_t *ent_up) + lstcon_rpc_ent_t __user *ent_up) { srpc_debug_reply_t *rep; @@ -392,8 +392,8 @@ lstcon_sesrpc_readent(int transop, srpc_msg_t *msg, static int lstcon_group_nodes_add(lstcon_group_t *grp, - int count, lnet_process_id_t *ids_up, - unsigned *featp, struct list_head *result_up) + int count, lnet_process_id_t __user *ids_up, + unsigned *featp, struct list_head __user *result_up) { lstcon_rpc_trans_t *trans; lstcon_ndlink_t *ndl; @@ -459,8 +459,8 @@ lstcon_group_nodes_add(lstcon_group_t *grp, static int lstcon_group_nodes_remove(lstcon_group_t *grp, - int count, lnet_process_id_t *ids_up, - struct list_head *result_up) + int count, lnet_process_id_t __user *ids_up, + struct list_head __user *result_up) { lstcon_rpc_trans_t *trans; lstcon_ndlink_t *ndl; @@ -537,8 +537,8 @@ lstcon_group_add(char *name) } int -lstcon_nodes_add(char *name, int count, lnet_process_id_t *ids_up, - unsigned *featp, struct list_head *result_up) +lstcon_nodes_add(char *name, int count, lnet_process_id_t __user *ids_up, + unsigned *featp, struct list_head __user *result_up) { lstcon_group_t *grp; int rc; @@ -641,8 +641,8 @@ lstcon_group_clean(char *name, int args) } int -lstcon_nodes_remove(char *name, int count, - lnet_process_id_t *ids_up, struct list_head *result_up) +lstcon_nodes_remove(char *name, int count, lnet_process_id_t __user *ids_up, + struct list_head __user *result_up) { lstcon_group_t *grp = NULL; int rc; @@ -671,7 +671,7 @@ lstcon_nodes_remove(char *name, int count, } int -lstcon_group_refresh(char *name, struct list_head *result_up) +lstcon_group_refresh(char *name, struct list_head __user *result_up) { lstcon_rpc_trans_t *trans; lstcon_group_t *grp; @@ -713,7 +713,7 @@ lstcon_group_refresh(char *name, struct list_head *result_up) } int -lstcon_group_list(int index, int len, char *name_up) +lstcon_group_list(int index, int len, char __user *name_up) { lstcon_group_t *grp; @@ -732,7 +732,7 @@ lstcon_group_list(int index, int len, char *name_up) static int lstcon_nodes_getent(struct list_head *head, int *index_p, - int *count_p, lstcon_node_ent_t *dents_up) + int *count_p, lstcon_node_ent_t __user *dents_up) { lstcon_ndlink_t *ndl; lstcon_node_t *nd; @@ -771,8 +771,9 @@ lstcon_nodes_getent(struct list_head *head, int *index_p, } int -lstcon_group_info(char *name, lstcon_ndlist_ent_t *gents_p, - int *index_p, int *count_p, lstcon_node_ent_t *dents_up) +lstcon_group_info(char *name, lstcon_ndlist_ent_t __user *gents_p, + int *index_p, int *count_p, + lstcon_node_ent_t __user *dents_up) { lstcon_ndlist_ent_t *gentp; lstcon_group_t *grp; @@ -892,7 +893,7 @@ lstcon_batch_add(char *name) } int -lstcon_batch_list(int index, int len, char *name_up) +lstcon_batch_list(int index, int len, char __user *name_up) { lstcon_batch_t *bat; @@ -910,9 +911,9 @@ lstcon_batch_list(int index, int len, char *name_up) } int -lstcon_batch_info(char *name, lstcon_test_batch_ent_t *ent_up, int server, - int testidx, int *index_p, int *ndent_p, - lstcon_node_ent_t *dents_up) +lstcon_batch_info(char *name, lstcon_test_batch_ent_t __user *ent_up, + int server, int testidx, int *index_p, int *ndent_p, + lstcon_node_ent_t __user *dents_up) { lstcon_test_batch_ent_t *entp; struct list_head *clilst; @@ -1006,7 +1007,7 @@ lstcon_batrpc_condition(int transop, lstcon_node_t *nd, void *arg) static int lstcon_batch_op(lstcon_batch_t *bat, int transop, - struct list_head *result_up) + struct list_head __user *result_up) { lstcon_rpc_trans_t *trans; int rc; @@ -1029,7 +1030,7 @@ lstcon_batch_op(lstcon_batch_t *bat, int transop, } int -lstcon_batch_run(char *name, int timeout, struct list_head *result_up) +lstcon_batch_run(char *name, int timeout, struct list_head __user *result_up) { lstcon_batch_t *bat; int rc; @@ -1051,7 +1052,7 @@ lstcon_batch_run(char *name, int timeout, struct list_head *result_up) } int -lstcon_batch_stop(char *name, int force, struct list_head *result_up) +lstcon_batch_stop(char *name, int force, struct list_head __user *result_up) { lstcon_batch_t *bat; int rc; @@ -1170,7 +1171,7 @@ lstcon_testrpc_condition(int transop, lstcon_node_t *nd, void *arg) } static int -lstcon_test_nodes_add(lstcon_test_t *test, struct list_head *result_up) +lstcon_test_nodes_add(lstcon_test_t *test, struct list_head __user *result_up) { lstcon_rpc_trans_t *trans; lstcon_group_t *grp; @@ -1266,7 +1267,7 @@ lstcon_test_add(char *batch_name, int type, int loop, int concur, int dist, int span, char *src_name, char *dst_name, void *param, int paramlen, int *retp, - struct list_head *result_up) + struct list_head __user *result_up) { lstcon_test_t *test = NULL; int rc; @@ -1369,7 +1370,7 @@ lstcon_test_find(lstcon_batch_t *batch, int idx, lstcon_test_t **testpp) static int lstcon_tsbrpc_readent(int transop, srpc_msg_t *msg, - lstcon_rpc_ent_t *ent_up) + lstcon_rpc_ent_t __user *ent_up) { srpc_batch_reply_t *rep = &msg->msg_body.bat_reply; @@ -1386,7 +1387,7 @@ lstcon_tsbrpc_readent(int transop, srpc_msg_t *msg, int lstcon_test_batch_query(char *name, int testidx, int client, - int timeout, struct list_head *result_up) + int timeout, struct list_head __user *result_up) { lstcon_rpc_trans_t *trans; struct list_head *translist; @@ -1448,19 +1449,21 @@ lstcon_test_batch_query(char *name, int testidx, int client, static int lstcon_statrpc_readent(int transop, srpc_msg_t *msg, - lstcon_rpc_ent_t *ent_up) + lstcon_rpc_ent_t __user *ent_up) { srpc_stat_reply_t *rep = &msg->msg_body.stat_reply; - sfw_counters_t *sfwk_stat; - srpc_counters_t *srpc_stat; - lnet_counters_t *lnet_stat; + sfw_counters_t __user *sfwk_stat; + srpc_counters_t __user *srpc_stat; + lnet_counters_t __user *lnet_stat; if (rep->str_status != 0) return 0; - sfwk_stat = (sfw_counters_t *)&ent_up->rpe_payload[0]; - srpc_stat = (srpc_counters_t *)((char *)sfwk_stat + sizeof(*sfwk_stat)); - lnet_stat = (lnet_counters_t *)((char *)srpc_stat + sizeof(*srpc_stat)); + sfwk_stat = (sfw_counters_t __user *)&ent_up->rpe_payload[0]; + srpc_stat = (srpc_counters_t __user *) + ((char *)sfwk_stat + sizeof(*sfwk_stat)); + lnet_stat = (lnet_counters_t __user *) + ((char *)srpc_stat + sizeof(*srpc_stat)); if (copy_to_user(sfwk_stat, &rep->str_fw, sizeof(*sfwk_stat)) || copy_to_user(srpc_stat, &rep->str_rpc, sizeof(*srpc_stat)) || @@ -1472,7 +1475,7 @@ lstcon_statrpc_readent(int transop, srpc_msg_t *msg, static int lstcon_ndlist_stat(struct list_head *ndlist, - int timeout, struct list_head *result_up) + int timeout, struct list_head __user *result_up) { struct list_head head; lstcon_rpc_trans_t *trans; @@ -1497,7 +1500,8 @@ lstcon_ndlist_stat(struct list_head *ndlist, } int -lstcon_group_stat(char *grp_name, int timeout, struct list_head *result_up) +lstcon_group_stat(char *grp_name, int timeout, + struct list_head __user *result_up) { lstcon_group_t *grp; int rc; @@ -1516,8 +1520,8 @@ lstcon_group_stat(char *grp_name, int timeout, struct list_head *result_up) } int -lstcon_nodes_stat(int count, lnet_process_id_t *ids_up, - int timeout, struct list_head *result_up) +lstcon_nodes_stat(int count, lnet_process_id_t __user *ids_up, + int timeout, struct list_head __user *result_up) { lstcon_ndlink_t *ndl; lstcon_group_t *tmp; @@ -1562,7 +1566,7 @@ lstcon_nodes_stat(int count, lnet_process_id_t *ids_up, static int lstcon_debug_ndlist(struct list_head *ndlist, struct list_head *translist, - int timeout, struct list_head *result_up) + int timeout, struct list_head __user *result_up) { lstcon_rpc_trans_t *trans; int rc; @@ -1584,7 +1588,7 @@ lstcon_debug_ndlist(struct list_head *ndlist, } int -lstcon_session_debug(int timeout, struct list_head *result_up) +lstcon_session_debug(int timeout, struct list_head __user *result_up) { return lstcon_debug_ndlist(&console_session.ses_ndl_list, NULL, timeout, result_up); @@ -1592,7 +1596,7 @@ lstcon_session_debug(int timeout, struct list_head *result_up) int lstcon_batch_debug(int timeout, char *name, - int client, struct list_head *result_up) + int client, struct list_head __user *result_up) { lstcon_batch_t *bat; int rc; @@ -1610,7 +1614,7 @@ lstcon_batch_debug(int timeout, char *name, int lstcon_group_debug(int timeout, char *name, - struct list_head *result_up) + struct list_head __user *result_up) { lstcon_group_t *grp; int rc; @@ -1628,8 +1632,8 @@ lstcon_group_debug(int timeout, char *name, int lstcon_nodes_debug(int timeout, - int count, lnet_process_id_t *ids_up, - struct list_head *result_up) + int count, lnet_process_id_t __user *ids_up, + struct list_head __user *result_up) { lnet_process_id_t id; lstcon_ndlink_t *ndl; @@ -1693,7 +1697,7 @@ extern srpc_service_t lstcon_acceptor_service; int lstcon_session_new(char *name, int key, unsigned feats, - int timeout, int force, lst_sid_t *sid_up) + int timeout, int force, lst_sid_t __user *sid_up) { int rc = 0; int i; @@ -1758,8 +1762,10 @@ lstcon_session_new(char *name, int key, unsigned feats, } int -lstcon_session_info(lst_sid_t *sid_up, int *key_up, unsigned *featp, - lstcon_ndlist_ent_t *ndinfo_up, char *name_up, int len) +lstcon_session_info(lst_sid_t __user *sid_up, int __user *key_up, + unsigned __user *featp, + lstcon_ndlist_ent_t __user *ndinfo_up, + char __user *name_up, int len) { lstcon_ndlist_ent_t *entp; lstcon_ndlink_t *ndl; diff --git a/drivers/staging/lustre/lnet/selftest/console.h b/drivers/staging/lustre/lnet/selftest/console.h index 3f3286c..f7ccaeb 100644 --- a/drivers/staging/lustre/lnet/selftest/console.h +++ b/drivers/staging/lustre/lnet/selftest/console.h @@ -188,47 +188,51 @@ int lstcon_ioctl_entry(unsigned int cmd, struct libcfs_ioctl_data *data); int lstcon_console_fini(void); int lstcon_session_match(lst_sid_t sid); int lstcon_session_new(char *name, int key, unsigned version, - int timeout, int flags, lst_sid_t *sid_up); -int lstcon_session_info(lst_sid_t *sid_up, int *key, unsigned *verp, - lstcon_ndlist_ent_t *entp, char *name_up, int len); + int timeout, int flags, lst_sid_t __user *sid_up); +int lstcon_session_info(lst_sid_t __user *sid_up, int __user *key, + unsigned __user *verp, lstcon_ndlist_ent_t __user *entp, + char __user *name_up, int len); int lstcon_session_end(void); -int lstcon_session_debug(int timeout, struct list_head *result_up); +int lstcon_session_debug(int timeout, struct list_head __user *result_up); int lstcon_session_feats_check(unsigned feats); int lstcon_batch_debug(int timeout, char *name, - int client, struct list_head *result_up); + int client, struct list_head __user *result_up); int lstcon_group_debug(int timeout, char *name, - struct list_head *result_up); -int lstcon_nodes_debug(int timeout, int nnd, lnet_process_id_t *nds_up, - struct list_head *result_up); + struct list_head __user *result_up); +int lstcon_nodes_debug(int timeout, int nnd, lnet_process_id_t __user *nds_up, + struct list_head __user *result_up); int lstcon_group_add(char *name); int lstcon_group_del(char *name); int lstcon_group_clean(char *name, int args); -int lstcon_group_refresh(char *name, struct list_head *result_up); -int lstcon_nodes_add(char *name, int nnd, lnet_process_id_t *nds_up, - unsigned *featp, struct list_head *result_up); -int lstcon_nodes_remove(char *name, int nnd, lnet_process_id_t *nds_up, - struct list_head *result_up); -int lstcon_group_info(char *name, lstcon_ndlist_ent_t *gent_up, - int *index_p, int *ndent_p, lstcon_node_ent_t *ndents_up); -int lstcon_group_list(int idx, int len, char *name_up); +int lstcon_group_refresh(char *name, struct list_head __user *result_up); +int lstcon_nodes_add(char *name, int nnd, lnet_process_id_t __user *nds_up, + unsigned *featp, struct list_head __user *result_up); +int lstcon_nodes_remove(char *name, int nnd, lnet_process_id_t __user *nds_up, + struct list_head __user *result_up); +int lstcon_group_info(char *name, lstcon_ndlist_ent_t __user *gent_up, + int *index_p, int *ndent_p, + lstcon_node_ent_t __user *ndents_up); +int lstcon_group_list(int idx, int len, char __user *name_up); int lstcon_batch_add(char *name); -int lstcon_batch_run(char *name, int timeout, struct list_head *result_up); -int lstcon_batch_stop(char *name, int force, struct list_head *result_up); +int lstcon_batch_run(char *name, int timeout, + struct list_head __user *result_up); +int lstcon_batch_stop(char *name, int force, + struct list_head __user *result_up); int lstcon_test_batch_query(char *name, int testidx, int client, int timeout, - struct list_head *result_up); + struct list_head __user *result_up); int lstcon_batch_del(char *name); -int lstcon_batch_list(int idx, int namelen, char *name_up); -int lstcon_batch_info(char *name, lstcon_test_batch_ent_t *ent_up, +int lstcon_batch_list(int idx, int namelen, char __user *name_up); +int lstcon_batch_info(char *name, lstcon_test_batch_ent_t __user *ent_up, int server, int testidx, int *index_p, - int *ndent_p, lstcon_node_ent_t *dents_up); + int *ndent_p, lstcon_node_ent_t __user *dents_up); int lstcon_group_stat(char *grp_name, int timeout, - struct list_head *result_up); -int lstcon_nodes_stat(int count, lnet_process_id_t *ids_up, - int timeout, struct list_head *result_up); + struct list_head __user *result_up); +int lstcon_nodes_stat(int count, lnet_process_id_t __user *ids_up, + int timeout, struct list_head __user *result_up); int lstcon_test_add(char *batch_name, int type, int loop, int concur, int dist, int span, char *src_name, char *dst_name, void *param, int paramlen, int *retp, - struct list_head *result_up); + struct list_head __user *result_up); #endif diff --git a/drivers/staging/lustre/lustre/fid/lproc_fid.c b/drivers/staging/lustre/lustre/fid/lproc_fid.c index 39f2aa3..0320b6e 100644 --- a/drivers/staging/lustre/lustre/fid/lproc_fid.c +++ b/drivers/staging/lustre/lustre/fid/lproc_fid.c @@ -85,6 +85,8 @@ ldebugfs_fid_write_common(const char __user *buffer, size_t count, rc = sscanf(kernbuf, "[%llx - %llx]\n", (unsigned long long *)&tmp.lsr_start, (unsigned long long *)&tmp.lsr_end); + if (rc != 2) + return -EINVAL; if (!range_is_sane(&tmp) || range_is_zero(&tmp) || tmp.lsr_start < range->lsr_start || tmp.lsr_end > range->lsr_end) return -EINVAL; diff --git a/drivers/staging/lustre/lustre/include/lprocfs_status.h b/drivers/staging/lustre/lustre/include/lprocfs_status.h index 0ac8e0e..fb13094 100644 --- a/drivers/staging/lustre/lustre/include/lprocfs_status.h +++ b/drivers/staging/lustre/lustre/include/lprocfs_status.h @@ -608,7 +608,7 @@ int lprocfs_write_helper(const char __user *buffer, unsigned long count, int *val); int lprocfs_write_u64_helper(const char __user *buffer, unsigned long count, __u64 *val); -int lprocfs_write_frac_u64_helper(const char *buffer, +int lprocfs_write_frac_u64_helper(const char __user *buffer, unsigned long count, __u64 *val, int mult); char *lprocfs_find_named_value(const char *buffer, const char *name, diff --git a/drivers/staging/lustre/lustre/include/lu_object.h b/drivers/staging/lustre/lustre/include/lu_object.h index 1d79341..0b22e5e 100644 --- a/drivers/staging/lustre/lustre/include/lu_object.h +++ b/drivers/staging/lustre/lustre/include/lu_object.h @@ -488,7 +488,7 @@ enum lu_object_header_flags { /** * Mark this object has already been taken out of cache. */ - LU_OBJECT_UNHASHED = 1 + LU_OBJECT_UNHASHED = 1, }; enum lu_object_header_attr { @@ -756,7 +756,7 @@ static inline const struct lu_fid *lu_object_fid(const struct lu_object *o) /** * return device operations vector for this object */ -static const inline struct lu_device_operations * +static inline const struct lu_device_operations * lu_object_ops(const struct lu_object *o) { return o->lo_dev->ld_ops; diff --git a/drivers/staging/lustre/lustre/include/lustre_cfg.h b/drivers/staging/lustre/lustre/include/lustre_cfg.h index eb6b292..d30d8b0 100644 --- a/drivers/staging/lustre/lustre/include/lustre_cfg.h +++ b/drivers/staging/lustre/lustre/include/lustre_cfg.h @@ -252,10 +252,6 @@ static inline struct lustre_cfg *lustre_cfg_new(int cmd, static inline void lustre_cfg_free(struct lustre_cfg *lcfg) { - int len; - - len = lustre_cfg_len(lcfg->lcfg_bufcount, lcfg->lcfg_buflens); - kfree(lcfg); return; } diff --git a/drivers/staging/lustre/lustre/include/lustre_export.h b/drivers/staging/lustre/lustre/include/lustre_export.h index 311e5aa..a030a98f 100644 --- a/drivers/staging/lustre/lustre/include/lustre_export.h +++ b/drivers/staging/lustre/lustre/include/lustre_export.h @@ -338,6 +338,13 @@ static inline bool imp_connect_disp_stripe(struct obd_import *imp) struct obd_export *class_conn2export(struct lustre_handle *conn); +#define KKUC_CT_DATA_MAGIC 0x092013cea +struct kkuc_ct_data { + __u32 kcd_magic; + struct obd_uuid kcd_uuid; + __u32 kcd_archive; +}; + /** @} export */ #endif /* __EXPORT_H */ diff --git a/drivers/staging/lustre/lustre/include/lustre_kernelcomm.h b/drivers/staging/lustre/lustre/include/lustre_kernelcomm.h new file mode 100644 index 0000000..970610b --- /dev/null +++ b/drivers/staging/lustre/lustre/include/lustre_kernelcomm.h @@ -0,0 +1,55 @@ +/* + * GPL HEADER START + * + * DO NOT ALTER OR REMOVE COPYRIGHT NOTICES OR THIS FILE HEADER. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 only, + * as published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License version 2 for more details (a copy is included + * in the LICENSE file that accompanied this code). + * + * You should have received a copy of the GNU General Public License + * version 2 along with this program; If not, see + * http://www.gnu.org/licenses/gpl-2.0.html + * + * GPL HEADER END + */ +/* + * Copyright (c) 2009, 2010, Oracle and/or its affiliates. All rights reserved. + * Use is subject to license terms. + * + * Copyright (c) 2013 Intel Corporation. + */ +/* + * This file is part of Lustre, http://www.lustre.org/ + * + * Author: Nathan Rutman <nathan.rutman@sun.com> + * + * Kernel <-> userspace communication routines. + * The definitions below are used in the kernel and userspace. + */ + +#ifndef __LUSTRE_KERNELCOMM_H__ +#define __LUSTRE_KERNELCOMM_H__ + +/* For declarations shared with userspace */ +#include "uapi_kernelcomm.h" + +/* prototype for callback function on kuc groups */ +typedef int (*libcfs_kkuc_cb_t)(void *data, void *cb_arg); + +/* Kernel methods */ +int libcfs_kkuc_msg_put(struct file *fp, void *payload); +int libcfs_kkuc_group_put(unsigned int group, void *payload); +int libcfs_kkuc_group_add(struct file *fp, int uid, unsigned int group, + void *data, size_t data_len); +int libcfs_kkuc_group_rem(int uid, unsigned int group); +int libcfs_kkuc_group_foreach(unsigned int group, libcfs_kkuc_cb_t cb_func, + void *cb_arg); + +#endif /* __LUSTRE_KERNELCOMM_H__ */ diff --git a/drivers/staging/lustre/lustre/include/lustre_lib.h b/drivers/staging/lustre/lustre/include/lustre_lib.h index 428469f..cfccf7c 100644 --- a/drivers/staging/lustre/lustre/include/lustre_lib.h +++ b/drivers/staging/lustre/lustre/include/lustre_lib.h @@ -153,9 +153,9 @@ struct obd_ioctl_data { /* buffers the kernel will treat as user pointers */ __u32 ioc_plen1; - char *ioc_pbuf1; + void __user *ioc_pbuf1; __u32 ioc_plen2; - char *ioc_pbuf2; + void __user *ioc_pbuf2; /* inline buffers for various arguments */ __u32 ioc_inllen1; @@ -252,8 +252,8 @@ static inline int obd_ioctl_is_invalid(struct obd_ioctl_data *data) #include "obd_support.h" /* function defined in lustre/obdclass/<platform>/<platform>-module.c */ -int obd_ioctl_getdata(char **buf, int *len, void *arg); -int obd_ioctl_popdata(void *arg, void *data, int len); +int obd_ioctl_getdata(char **buf, int *len, void __user *arg); +int obd_ioctl_popdata(void __user *arg, void *data, int len); static inline void obd_ioctl_freedata(char *buf, int len) { @@ -365,10 +365,10 @@ static inline void obd_ioctl_freedata(char *buf, int len) /* OBD_IOC_LLOG_CATINFO is deprecated */ #define OBD_IOC_LLOG_CATINFO _IOWR('f', 196, OBD_IOC_DATA_TYPE) -#define ECHO_IOC_GET_STRIPE _IOWR('f', 200, OBD_IOC_DATA_TYPE) -#define ECHO_IOC_SET_STRIPE _IOWR('f', 201, OBD_IOC_DATA_TYPE) -#define ECHO_IOC_ENQUEUE _IOWR('f', 202, OBD_IOC_DATA_TYPE) -#define ECHO_IOC_CANCEL _IOWR('f', 203, OBD_IOC_DATA_TYPE) +/* #define ECHO_IOC_GET_STRIPE _IOWR('f', 200, OBD_IOC_DATA_TYPE) */ +/* #define ECHO_IOC_SET_STRIPE _IOWR('f', 201, OBD_IOC_DATA_TYPE) */ +/* #define ECHO_IOC_ENQUEUE _IOWR('f', 202, OBD_IOC_DATA_TYPE) */ +/* #define ECHO_IOC_CANCEL _IOWR('f', 203, OBD_IOC_DATA_TYPE) */ #define OBD_IOC_GET_OBJ_VERSION _IOR('f', 210, OBD_IOC_DATA_TYPE) diff --git a/drivers/staging/lustre/lustre/include/obd.h b/drivers/staging/lustre/lustre/include/obd.h index bcbe613..f00d9a2 100644 --- a/drivers/staging/lustre/lustre/include/obd.h +++ b/drivers/staging/lustre/lustre/include/obd.h @@ -375,7 +375,6 @@ struct echo_client_obd { spinlock_t ec_lock; struct list_head ec_objects; struct list_head ec_locks; - int ec_nstripes; __u64 ec_unique; }; @@ -965,7 +964,7 @@ struct md_enqueue_info { struct obd_ops { struct module *owner; int (*iocontrol)(unsigned int cmd, struct obd_export *exp, int len, - void *karg, void *uarg); + void *karg, void __user *uarg); int (*get_info)(const struct lu_env *env, struct obd_export *, __u32 keylen, void *key, __u32 *vallen, void *val, struct lov_stripe_md *lsm); diff --git a/drivers/staging/lustre/lustre/include/obd_class.h b/drivers/staging/lustre/lustre/include/obd_class.h index 97d8039..4f631e6 100644 --- a/drivers/staging/lustre/lustre/include/obd_class.h +++ b/drivers/staging/lustre/lustre/include/obd_class.h @@ -1155,7 +1155,7 @@ static inline int obd_adjust_kms(struct obd_export *exp, } static inline int obd_iocontrol(unsigned int cmd, struct obd_export *exp, - int len, void *karg, void *uarg) + int len, void *karg, void __user *uarg) { int rc; diff --git a/drivers/staging/lustre/include/linux/libcfs/libcfs_kernelcomm.h b/drivers/staging/lustre/lustre/include/uapi_kernelcomm.h index 41f3d81..5e99836 100644 --- a/drivers/staging/lustre/include/linux/libcfs/libcfs_kernelcomm.h +++ b/drivers/staging/lustre/lustre/include/uapi_kernelcomm.h @@ -15,37 +15,29 @@ * * You should have received a copy of the GNU General Public License * version 2 along with this program; If not, see - * http://www.sun.com/software/products/lustre/docs/GPLv2.pdf - * - * Please contact Sun Microsystems, Inc., 4150 Network Circle, Santa Clara, - * CA 95054 USA or visit www.sun.com if you need additional information or - * have any questions. + * http://www.gnu.org/licenses/gpl-2.0.html * * GPL HEADER END */ /* * Copyright (c) 2009, 2010, Oracle and/or its affiliates. All rights reserved. * Use is subject to license terms. + * + * Copyright (c) 2013, Intel Corporation. */ /* * This file is part of Lustre, http://www.lustre.org/ - * Lustre is a trademark of Sun Microsystems, Inc. * * Author: Nathan Rutman <nathan.rutman@sun.com> * - * libcfs/include/libcfs/libcfs_kernelcomm.h - * * Kernel <-> userspace communication routines. * The definitions below are used in the kernel and userspace. - * */ -#ifndef __LIBCFS_KERNELCOMM_H__ -#define __LIBCFS_KERNELCOMM_H__ +#ifndef __UAPI_KERNELCOMM_H__ +#define __UAPI_KERNELCOMM_H__ -#ifndef __LIBCFS_LIBCFS_H__ -#error Do not #include this file directly. #include <linux/libcfs/libcfs.h> instead -#endif +#include <linux/types.h> /* KUC message header. * All current and future KUC messages should use this header. @@ -53,66 +45,50 @@ */ struct kuc_hdr { __u16 kuc_magic; - __u8 kuc_transport; /* Each new Lustre feature should use a different - transport */ + /* Each new Lustre feature should use a different transport */ + __u8 kuc_transport; __u8 kuc_flags; - __u16 kuc_msgtype; /* Message type or opcode, transport-specific */ - __u16 kuc_msglen; /* Including header */ + /* Message type or opcode, transport-specific */ + __u16 kuc_msgtype; + /* Including header */ + __u16 kuc_msglen; } __aligned(sizeof(__u64)); -#define KUC_CHANGELOG_MSG_MAXSIZE (sizeof(struct kuc_hdr)+CR_MAXSIZE) +#define KUC_CHANGELOG_MSG_MAXSIZE (sizeof(struct kuc_hdr) + CR_MAXSIZE) -#define KUC_MAGIC 0x191C /*Lustre9etLinC */ -#define KUC_FL_BLOCK 0x01 /* Wait for send */ +#define KUC_MAGIC 0x191C /*Lustre9etLinC */ /* kuc_msgtype values are defined in each transport */ enum kuc_transport_type { - KUC_TRANSPORT_GENERIC = 1, - KUC_TRANSPORT_HSM = 2, - KUC_TRANSPORT_CHANGELOG = 3, + KUC_TRANSPORT_GENERIC = 1, + KUC_TRANSPORT_HSM = 2, + KUC_TRANSPORT_CHANGELOG = 3, }; enum kuc_generic_message_type { - KUC_MSG_SHUTDOWN = 1, + KUC_MSG_SHUTDOWN = 1, }; -/* prototype for callback function on kuc groups */ -typedef int (*libcfs_kkuc_cb_t)(__u32 data, void *cb_arg); - /* KUC Broadcast Groups. This determines which userspace process hears which * messages. Mutliple transports may be used within a group, or multiple * groups may use the same transport. Broadcast * groups need not be used if e.g. a UID is specified instead; * use group 0 to signify unicast. */ -#define KUC_GRP_HSM 0x02 -#define KUC_GRP_MAX KUC_GRP_HSM - -/* Kernel methods */ -int libcfs_kkuc_msg_put(struct file *fp, void *payload); -int libcfs_kkuc_group_put(int group, void *payload); -int libcfs_kkuc_group_add(struct file *fp, int uid, unsigned int group, - __u32 data); -int libcfs_kkuc_group_rem(int uid, int group); -int libcfs_kkuc_group_foreach(int group, libcfs_kkuc_cb_t cb_func, - void *cb_arg); +#define KUC_GRP_HSM 0x02 +#define KUC_GRP_MAX KUC_GRP_HSM #define LK_FLG_STOP 0x01 +#define LK_NOFD -1U /* kernelcomm control structure, passed from userspace to kernel */ -typedef struct lustre_kernelcomm { +struct lustre_kernelcomm { __u32 lk_wfd; __u32 lk_rfd; __u32 lk_uid; __u32 lk_group; __u32 lk_data; __u32 lk_flags; -} __packed lustre_kernelcomm; - -/* Userspace methods */ -int libcfs_ukuc_start(lustre_kernelcomm *l, int groups); -int libcfs_ukuc_stop(lustre_kernelcomm *l); -int libcfs_ukuc_msg_get(lustre_kernelcomm *l, char *buf, int maxsize, - int transport); +} __packed; -#endif /* __LIBCFS_KERNELCOMM_H__ */ +#endif /* __UAPI_KERNELCOMM_H__ */ diff --git a/drivers/staging/lustre/lustre/lclient/lcommon_cl.c b/drivers/staging/lustre/lustre/lclient/lcommon_cl.c index 34dde7d..4dfeb4e 100644 --- a/drivers/staging/lustre/lustre/lclient/lcommon_cl.c +++ b/drivers/staging/lustre/lustre/lclient/lcommon_cl.c @@ -986,17 +986,6 @@ struct inode *ccc_object_inode(const struct cl_object *obj) } /** - * Returns a pointer to cl_page associated with \a vmpage, without acquiring - * additional reference to the resulting page. This is an unsafe version of - * cl_vmpage_page() that can only be used under vmpage lock. - */ -struct cl_page *ccc_vmpage_page_transient(struct page *vmpage) -{ - KLASSERT(PageLocked(vmpage)); - return (struct cl_page *)vmpage->private; -} - -/** * Initialize or update CLIO structures for regular files when new * meta-data arrives from the server. * diff --git a/drivers/staging/lustre/lustre/libcfs/Makefile b/drivers/staging/lustre/lustre/libcfs/Makefile index 03d3f3d..277c123 100644 --- a/drivers/staging/lustre/lustre/libcfs/Makefile +++ b/drivers/staging/lustre/lustre/libcfs/Makefile @@ -11,8 +11,7 @@ libcfs-linux-objs += linux-mem.o libcfs-linux-objs := $(addprefix linux/,$(libcfs-linux-objs)) libcfs-all-objs := debug.o fail.o module.o tracefile.o \ - libcfs_string.o hash.o kernel_user_comm.o \ - prng.o workitem.o libcfs_cpu.o \ - libcfs_mem.o libcfs_lock.o + libcfs_string.o hash.o prng.o workitem.o \ + libcfs_cpu.o libcfs_mem.o libcfs_lock.o libcfs-objs := $(libcfs-linux-objs) $(libcfs-all-objs) diff --git a/drivers/staging/lustre/lustre/libcfs/debug.c b/drivers/staging/lustre/lustre/libcfs/debug.c index 0b38dad..6274558 100644 --- a/drivers/staging/lustre/lustre/libcfs/debug.c +++ b/drivers/staging/lustre/lustre/libcfs/debug.c @@ -271,6 +271,8 @@ libcfs_debug_subsys2str(int subsys) return "lquota"; case S_OSD: return "osd"; + case S_LFSCK: + return "lfsck"; case S_LMV: return "lmv"; case S_SEC: diff --git a/drivers/staging/lustre/lustre/libcfs/libcfs_cpu.c b/drivers/staging/lustre/lustre/libcfs/libcfs_cpu.c index 933525c..ba97c79 100644 --- a/drivers/staging/lustre/lustre/libcfs/libcfs_cpu.c +++ b/drivers/staging/lustre/lustre/libcfs/libcfs_cpu.c @@ -58,6 +58,7 @@ cfs_cpt_table_alloc(unsigned int ncpt) LIBCFS_ALLOC(cptab, sizeof(*cptab)); if (cptab != NULL) { cptab->ctb_version = CFS_CPU_VERSION_MAGIC; + node_set(0, cptab->ctb_nodemask); cptab->ctb_nparts = ncpt; } @@ -111,6 +112,13 @@ cfs_cpt_online(struct cfs_cpt_table *cptab, int cpt) } EXPORT_SYMBOL(cfs_cpt_online); +nodemask_t * +cfs_cpt_nodemask(struct cfs_cpt_table *cptab, int cpt) +{ + return &cptab->ctb_nodemask; +} +EXPORT_SYMBOL(cfs_cpt_cpumask); + int cfs_cpt_set_cpu(struct cfs_cpt_table *cptab, int cpt, int cpu) { diff --git a/drivers/staging/lustre/lustre/libcfs/libcfs_lock.c b/drivers/staging/lustre/lustre/libcfs/libcfs_lock.c index 15782d9..32db788 100644 --- a/drivers/staging/lustre/lustre/libcfs/libcfs_lock.c +++ b/drivers/staging/lustre/lustre/libcfs/libcfs_lock.c @@ -90,6 +90,7 @@ EXPORT_SYMBOL(cfs_percpt_lock_alloc); */ void cfs_percpt_lock(struct cfs_percpt_lock *pcl, int index) + __acquires(pcl->pcl_locks) { int ncpt = cfs_cpt_number(pcl->pcl_cptab); int i; @@ -124,6 +125,7 @@ EXPORT_SYMBOL(cfs_percpt_lock); /** unlock a CPU partition */ void cfs_percpt_unlock(struct cfs_percpt_lock *pcl, int index) + __releases(pcl->pcl_locks) { int ncpt = cfs_cpt_number(pcl->pcl_cptab); int i; diff --git a/drivers/staging/lustre/lustre/libcfs/linux/linux-module.c b/drivers/staging/lustre/lustre/libcfs/linux/linux-module.c index 70a99cf0..e5bc3d3 100644 --- a/drivers/staging/lustre/lustre/libcfs/linux/linux-module.c +++ b/drivers/staging/lustre/lustre/libcfs/linux/linux-module.c @@ -40,7 +40,7 @@ #define LNET_MINOR 240 -int libcfs_ioctl_getdata(char *buf, char *end, void *arg) +int libcfs_ioctl_getdata(char *buf, char *end, void __user *arg) { struct libcfs_ioctl_hdr *hdr; struct libcfs_ioctl_data *data; @@ -88,9 +88,9 @@ int libcfs_ioctl_getdata(char *buf, char *end, void *arg) return 0; } -int libcfs_ioctl_popdata(void *arg, void *data, int size) +int libcfs_ioctl_popdata(void __user *arg, void *data, int size) { - if (copy_to_user((char *)arg, data, size)) + if (copy_to_user(arg, data, size)) return -EFAULT; return 0; } @@ -98,14 +98,12 @@ int libcfs_ioctl_popdata(void *arg, void *data, int size) static int libcfs_psdev_open(struct inode *inode, struct file *file) { - struct libcfs_device_userstate **pdu = NULL; int rc = 0; if (!inode) return -EINVAL; - pdu = (struct libcfs_device_userstate **)&file->private_data; if (libcfs_psdev_ops.p_open != NULL) - rc = libcfs_psdev_ops.p_open(0, (void *)pdu); + rc = libcfs_psdev_ops.p_open(0, NULL); else return -EPERM; return rc; @@ -115,14 +113,12 @@ libcfs_psdev_open(struct inode *inode, struct file *file) static int libcfs_psdev_release(struct inode *inode, struct file *file) { - struct libcfs_device_userstate *pdu; int rc = 0; if (!inode) return -EINVAL; - pdu = file->private_data; if (libcfs_psdev_ops.p_close != NULL) - rc = libcfs_psdev_ops.p_close(0, (void *)pdu); + rc = libcfs_psdev_ops.p_close(0, NULL); else rc = -EPERM; return rc; @@ -152,16 +148,10 @@ static long libcfs_ioctl(struct file *file, return -EPERM; panic("debugctl-invoked panic"); return 0; - case IOC_LIBCFS_MEMHOG: - if (!capable(CFS_CAP_SYS_ADMIN)) - return -EPERM; - /* go thought */ } - pfile.off = 0; - pfile.private_data = file->private_data; if (libcfs_psdev_ops.p_ioctl != NULL) - rc = libcfs_psdev_ops.p_ioctl(&pfile, cmd, (void *)arg); + rc = libcfs_psdev_ops.p_ioctl(&pfile, cmd, (void __user *)arg); else rc = -EPERM; return rc; diff --git a/drivers/staging/lustre/lustre/libcfs/module.c b/drivers/staging/lustre/lustre/libcfs/module.c index 329d78c..d5a047b 100644 --- a/drivers/staging/lustre/lustre/libcfs/module.c +++ b/drivers/staging/lustre/lustre/libcfs/module.c @@ -68,142 +68,16 @@ MODULE_LICENSE("GPL"); static struct dentry *lnet_debugfs_root; -static void kportal_memhog_free(struct libcfs_device_userstate *ldu) -{ - struct page **level0p = &ldu->ldu_memhog_root_page; - struct page **level1p; - struct page **level2p; - int count1; - int count2; - - if (*level0p != NULL) { - - level1p = (struct page **)page_address(*level0p); - count1 = 0; - - while (count1 < PAGE_CACHE_SIZE/sizeof(struct page *) && - *level1p != NULL) { - - level2p = (struct page **)page_address(*level1p); - count2 = 0; - - while (count2 < PAGE_CACHE_SIZE/sizeof(struct page *) && - *level2p != NULL) { - - __free_page(*level2p); - ldu->ldu_memhog_pages--; - level2p++; - count2++; - } - - __free_page(*level1p); - ldu->ldu_memhog_pages--; - level1p++; - count1++; - } - - __free_page(*level0p); - ldu->ldu_memhog_pages--; - - *level0p = NULL; - } - - LASSERT(ldu->ldu_memhog_pages == 0); -} - -static int kportal_memhog_alloc(struct libcfs_device_userstate *ldu, int npages, - gfp_t flags) -{ - struct page **level0p; - struct page **level1p; - struct page **level2p; - int count1; - int count2; - - LASSERT(ldu->ldu_memhog_pages == 0); - LASSERT(ldu->ldu_memhog_root_page == NULL); - - if (npages < 0) - return -EINVAL; - - if (npages == 0) - return 0; - - level0p = &ldu->ldu_memhog_root_page; - *level0p = alloc_page(flags); - if (*level0p == NULL) - return -ENOMEM; - ldu->ldu_memhog_pages++; - - level1p = (struct page **)page_address(*level0p); - count1 = 0; - memset(level1p, 0, PAGE_CACHE_SIZE); - - while (ldu->ldu_memhog_pages < npages && - count1 < PAGE_CACHE_SIZE/sizeof(struct page *)) { - - if (cfs_signal_pending()) - return -EINTR; - - *level1p = alloc_page(flags); - if (*level1p == NULL) - return -ENOMEM; - ldu->ldu_memhog_pages++; - - level2p = (struct page **)page_address(*level1p); - count2 = 0; - memset(level2p, 0, PAGE_CACHE_SIZE); - - while (ldu->ldu_memhog_pages < npages && - count2 < PAGE_CACHE_SIZE/sizeof(struct page *)) { - - if (cfs_signal_pending()) - return -EINTR; - - *level2p = alloc_page(flags); - if (*level2p == NULL) - return -ENOMEM; - ldu->ldu_memhog_pages++; - - level2p++; - count2++; - } - - level1p++; - count1++; - } - - return 0; -} - /* called when opening /dev/device */ static int libcfs_psdev_open(unsigned long flags, void *args) { - struct libcfs_device_userstate *ldu; - try_module_get(THIS_MODULE); - - LIBCFS_ALLOC(ldu, sizeof(*ldu)); - if (ldu != NULL) { - ldu->ldu_memhog_pages = 0; - ldu->ldu_memhog_root_page = NULL; - } - *(struct libcfs_device_userstate **)args = ldu; - return 0; } /* called when closing /dev/device */ static int libcfs_psdev_release(unsigned long flags, void *args) { - struct libcfs_device_userstate *ldu; - - ldu = (struct libcfs_device_userstate *)args; - if (ldu != NULL) { - kportal_memhog_free(ldu); - LIBCFS_FREE(ldu, sizeof(*ldu)); - } - module_put(THIS_MODULE); return 0; } @@ -242,7 +116,7 @@ int libcfs_deregister_ioctl(struct libcfs_ioctl_handler *hand) EXPORT_SYMBOL(libcfs_deregister_ioctl); static int libcfs_ioctl_int(struct cfs_psdev_file *pfile, unsigned long cmd, - void *arg, struct libcfs_ioctl_data *data) + void __user *arg, struct libcfs_ioctl_data *data) { int err = -EINVAL; @@ -260,19 +134,6 @@ static int libcfs_ioctl_int(struct cfs_psdev_file *pfile, unsigned long cmd, return -EINVAL; libcfs_debug_mark_buffer(data->ioc_inlbuf1); return 0; - case IOC_LIBCFS_MEMHOG: - if (pfile->private_data == NULL) { - err = -EINVAL; - } else { - kportal_memhog_free(pfile->private_data); - /* XXX The ioc_flags is not GFP flags now, need to be fixed */ - err = kportal_memhog_alloc(pfile->private_data, - data->ioc_count, - data->ioc_flags); - if (err != 0) - kportal_memhog_free(pfile->private_data); - } - break; default: { struct libcfs_ioctl_handler *hand; @@ -296,7 +157,8 @@ static int libcfs_ioctl_int(struct cfs_psdev_file *pfile, unsigned long cmd, return err; } -static int libcfs_ioctl(struct cfs_psdev_file *pfile, unsigned long cmd, void *arg) +static int libcfs_ioctl(struct cfs_psdev_file *pfile, unsigned long cmd, + void __user *arg) { char *buf; struct libcfs_ioctl_data *data; @@ -650,8 +512,6 @@ static const struct file_operations lnet_debugfs_file_operations = { void lustre_insert_debugfs(struct ctl_table *table, const struct lnet_debugfs_symlink_def *symlinks) { - struct dentry *entry; - if (lnet_debugfs_root == NULL) lnet_debugfs_root = debugfs_create_dir("lnet", NULL); @@ -659,15 +519,17 @@ void lustre_insert_debugfs(struct ctl_table *table, if (IS_ERR_OR_NULL(lnet_debugfs_root)) return; + /* We don't save the dentry returned in next two calls, because + * we don't call debugfs_remove() but rather remove_recursive() + */ for (; table->procname; table++) - entry = debugfs_create_file(table->procname, table->mode, - lnet_debugfs_root, table, - &lnet_debugfs_file_operations); + debugfs_create_file(table->procname, table->mode, + lnet_debugfs_root, table, + &lnet_debugfs_file_operations); for (; symlinks && symlinks->name; symlinks++) - entry = debugfs_create_symlink(symlinks->name, - lnet_debugfs_root, - symlinks->target); + debugfs_create_symlink(symlinks->name, lnet_debugfs_root, + symlinks->target); } EXPORT_SYMBOL_GPL(lustre_insert_debugfs); diff --git a/drivers/staging/lustre/lustre/llite/dcache.c b/drivers/staging/lustre/lustre/llite/dcache.c index 3d6745e..bc179e5 100644 --- a/drivers/staging/lustre/lustre/llite/dcache.c +++ b/drivers/staging/lustre/lustre/llite/dcache.c @@ -62,7 +62,7 @@ static void ll_release(struct dentry *de) LASSERT(de != NULL); lld = ll_d2d(de); - if (lld == NULL) /* NFS copies the de->d_op methods (bug 4655) */ + if (!lld) /* NFS copies the de->d_op methods (bug 4655) */ return; if (lld->lld_it) { @@ -131,7 +131,7 @@ static int find_cbdata(struct inode *inode) return rc; lsm = ccc_inode_lsm_get(inode); - if (lsm == NULL) + if (!lsm) return rc; rc = obd_find_cbdata(sbi->ll_dt_exp, lsm, return_if_equal, NULL); @@ -184,13 +184,13 @@ int ll_d_init(struct dentry *de) de, de, de->d_parent, d_inode(de), d_count(de)); - if (de->d_fsdata == NULL) { + if (!de->d_fsdata) { struct ll_dentry_data *lld; lld = kzalloc(sizeof(*lld), GFP_NOFS); if (likely(lld)) { spin_lock(&de->d_lock); - if (likely(de->d_fsdata == NULL)) { + if (likely(!de->d_fsdata)) { de->d_fsdata = lld; __d_lustre_invalidate(de); } else { @@ -328,7 +328,7 @@ static int ll_revalidate_dentry(struct dentry *dentry, if (lookup_flags & LOOKUP_RCU) return -ECHILD; - do_statahead_enter(dir, &dentry, d_inode(dentry) == NULL); + do_statahead_enter(dir, &dentry, !d_inode(dentry)); ll_statahead_mark(dir, dentry); return 1; } diff --git a/drivers/staging/lustre/lustre/llite/dir.c b/drivers/staging/lustre/lustre/llite/dir.c index 8982f7d..36b1055 100644 --- a/drivers/staging/lustre/lustre/llite/dir.c +++ b/drivers/staging/lustre/lustre/llite/dir.c @@ -55,6 +55,7 @@ #include "../include/lustre_lite.h" #include "../include/lustre_dlm.h" #include "../include/lustre_fid.h" +#include "../include/lustre_kernelcomm.h" #include "llite_internal.h" /* @@ -1252,7 +1253,7 @@ static long ll_dir_ioctl(struct file *file, unsigned int cmd, unsigned long arg) return ll_iocontrol(inode, file, cmd, arg); case FSFILT_IOC_GETVERSION_OLD: case FSFILT_IOC_GETVERSION: - return put_user(inode->i_generation, (int *)arg); + return put_user(inode->i_generation, (int __user *)arg); /* We need to special case any other ioctls we want to handle, * to send them to the MDS/OST as appropriate and to properly * network encode the arg field. @@ -1266,7 +1267,7 @@ static long ll_dir_ioctl(struct file *file, unsigned int cmd, unsigned long arg) if (mdtidx < 0) return mdtidx; - if (put_user((int)mdtidx, (int *)arg)) + if (put_user((int)mdtidx, (int __user *)arg)) return -EFAULT; return 0; @@ -1278,7 +1279,7 @@ static long ll_dir_ioctl(struct file *file, unsigned int cmd, unsigned long arg) char *filename; struct md_op_data *op_data; - rc = obd_ioctl_getdata(&buf, &len, (void *)arg); + rc = obd_ioctl_getdata(&buf, &len, (void __user *)arg); if (rc) return rc; data = (void *)buf; @@ -1320,7 +1321,7 @@ out_free: int len; int rc; - rc = obd_ioctl_getdata(&buf, &len, (void *)arg); + rc = obd_ioctl_getdata(&buf, &len, (void __user *)arg); if (rc) return rc; @@ -1363,8 +1364,8 @@ lmv_out_free: case LL_IOC_LOV_SETSTRIPE: { struct lov_user_md_v3 lumv3; struct lov_user_md_v1 *lumv1 = (struct lov_user_md_v1 *)&lumv3; - struct lov_user_md_v1 *lumv1p = (struct lov_user_md_v1 *)arg; - struct lov_user_md_v3 *lumv3p = (struct lov_user_md_v3 *)arg; + struct lov_user_md_v1 __user *lumv1p = (void __user *)arg; + struct lov_user_md_v3 __user *lumv3p = (void __user *)arg; int set_default = 0; @@ -1389,7 +1390,7 @@ lmv_out_free: return rc; } case LL_IOC_LMV_GETSTRIPE: { - struct lmv_user_md *lump = (struct lmv_user_md *)arg; + struct lmv_user_md __user *lump = (void __user *)arg; struct lmv_user_md lum; struct lmv_user_md *tmp; int lum_size; @@ -1422,7 +1423,7 @@ lmv_out_free: tmp->lum_objects[0].lum_mds = mdtindex; memcpy(&tmp->lum_objects[0].lum_fid, ll_inode2fid(inode), sizeof(struct lu_fid)); - if (copy_to_user((void *)arg, tmp, lum_size)) { + if (copy_to_user((void __user *)arg, tmp, lum_size)) { rc = -EFAULT; goto free_lmv; } @@ -1433,13 +1434,13 @@ free_lmv: case LL_IOC_LOV_SWAP_LAYOUTS: return -EPERM; case LL_IOC_OBD_STATFS: - return ll_obd_statfs(inode, (void *)arg); + return ll_obd_statfs(inode, (void __user *)arg); case LL_IOC_LOV_GETSTRIPE: case LL_IOC_MDC_GETINFO: case IOC_MDC_GETFILEINFO: case IOC_MDC_GETFILESTRIPE: { struct ptlrpc_request *request = NULL; - struct lov_user_md *lump; + struct lov_user_md __user *lump; struct lov_mds_md *lmm = NULL; struct mdt_body *body; char *filename = NULL; @@ -1447,7 +1448,7 @@ free_lmv: if (cmd == IOC_MDC_GETFILEINFO || cmd == IOC_MDC_GETFILESTRIPE) { - filename = ll_getname((const char *)arg); + filename = ll_getname((const char __user *)arg); if (IS_ERR(filename)) return PTR_ERR(filename); @@ -1476,11 +1477,11 @@ free_lmv: if (cmd == IOC_MDC_GETFILESTRIPE || cmd == LL_IOC_LOV_GETSTRIPE) { - lump = (struct lov_user_md *)arg; + lump = (struct lov_user_md __user *)arg; } else { - struct lov_user_mds_data *lmdp; + struct lov_user_mds_data __user *lmdp; - lmdp = (struct lov_user_mds_data *)arg; + lmdp = (struct lov_user_mds_data __user *)arg; lump = &lmdp->lmd_lmm; } if (copy_to_user(lump, lmm, lmmsize)) { @@ -1492,7 +1493,7 @@ free_lmv: } skip_lmm: if (cmd == IOC_MDC_GETFILEINFO || cmd == LL_IOC_MDC_GETINFO) { - struct lov_user_mds_data *lmdp; + struct lov_user_mds_data __user *lmdp; lstat_t st = { 0 }; st.st_dev = inode->i_sb->s_dev; @@ -1509,7 +1510,7 @@ skip_lmm: st.st_ctime = body->ctime; st.st_ino = inode->i_ino; - lmdp = (struct lov_user_mds_data *)arg; + lmdp = (struct lov_user_mds_data __user *)arg; if (copy_to_user(&lmdp->lmd_st, &st, sizeof(st))) { rc = -EFAULT; goto out_req; @@ -1523,14 +1524,14 @@ out_req: return rc; } case IOC_LOV_GETINFO: { - struct lov_user_mds_data *lumd; + struct lov_user_mds_data __user *lumd; struct lov_stripe_md *lsm; - struct lov_user_md *lum; + struct lov_user_md __user *lum; struct lov_mds_md *lmm; int lmmsize; lstat_t st; - lumd = (struct lov_user_mds_data *)arg; + lumd = (struct lov_user_mds_data __user *)arg; lum = &lumd->lmd_lmm; rc = ll_get_max_mdsize(sbi, &lmmsize); @@ -1636,8 +1637,8 @@ free_lmm: NULL); if (rc) { CDEBUG(D_QUOTA, "mdc ioctl %d failed: %d\n", cmd, rc); - if (copy_to_user((void *)arg, check, - sizeof(*check))) + if (copy_to_user((void __user *)arg, check, + sizeof(*check))) CDEBUG(D_QUOTA, "copy_to_user failed\n"); goto out_poll; } @@ -1646,8 +1647,8 @@ free_lmm: NULL); if (rc) { CDEBUG(D_QUOTA, "osc ioctl %d failed: %d\n", cmd, rc); - if (copy_to_user((void *)arg, check, - sizeof(*check))) + if (copy_to_user((void __user *)arg, check, + sizeof(*check))) CDEBUG(D_QUOTA, "copy_to_user failed\n"); goto out_poll; } @@ -1662,14 +1663,15 @@ out_poll: if (!qctl) return -ENOMEM; - if (copy_from_user(qctl, (void *)arg, sizeof(*qctl))) { + if (copy_from_user(qctl, (void __user *)arg, sizeof(*qctl))) { rc = -EFAULT; goto out_quotactl; } rc = quotactl_ioctl(sbi, qctl); - if (rc == 0 && copy_to_user((void *)arg, qctl, sizeof(*qctl))) + if (rc == 0 && copy_to_user((void __user *)arg, qctl, + sizeof(*qctl))) rc = -EFAULT; out_quotactl: @@ -1699,7 +1701,7 @@ out_quotactl: int count, vallen; struct obd_export *exp; - if (copy_from_user(&count, (int *)arg, sizeof(int))) + if (copy_from_user(&count, (int __user *)arg, sizeof(int))) return -EFAULT; /* get ost count when count is zero, get mdt count otherwise */ @@ -1712,34 +1714,35 @@ out_quotactl: return rc; } - if (copy_to_user((int *)arg, &count, sizeof(int))) + if (copy_to_user((int __user *)arg, &count, sizeof(int))) return -EFAULT; return 0; } case LL_IOC_PATH2FID: - if (copy_to_user((void *)arg, ll_inode2fid(inode), - sizeof(struct lu_fid))) + if (copy_to_user((void __user *)arg, ll_inode2fid(inode), + sizeof(struct lu_fid))) return -EFAULT; return 0; case LL_IOC_GET_CONNECT_FLAGS: { - return obd_iocontrol(cmd, sbi->ll_md_exp, 0, NULL, (void *)arg); + return obd_iocontrol(cmd, sbi->ll_md_exp, 0, NULL, + (void __user *)arg); } case OBD_IOC_CHANGELOG_SEND: case OBD_IOC_CHANGELOG_CLEAR: if (!capable(CFS_CAP_SYS_ADMIN)) return -EPERM; - rc = copy_and_ioctl(cmd, sbi->ll_md_exp, (void *)arg, + rc = copy_and_ioctl(cmd, sbi->ll_md_exp, (void __user *)arg, sizeof(struct ioc_changelog)); return rc; case OBD_IOC_FID2PATH: - return ll_fid2path(inode, (void *)arg); + return ll_fid2path(inode, (void __user *)arg); case LL_IOC_HSM_REQUEST: { struct hsm_user_request *hur; ssize_t totalsize; - hur = memdup_user((void *)arg, sizeof(*hur)); + hur = memdup_user((void __user *)arg, sizeof(*hur)); if (IS_ERR(hur)) return PTR_ERR(hur); @@ -1758,7 +1761,7 @@ out_quotactl: return -ENOMEM; /* Copy the whole struct */ - if (copy_from_user(hur, (void *)arg, totalsize)) { + if (copy_from_user(hur, (void __user *)arg, totalsize)) { kvfree(hur); return -EFAULT; } @@ -1794,7 +1797,7 @@ out_quotactl: struct hsm_progress_kernel hpk; struct hsm_progress hp; - if (copy_from_user(&hp, (void *)arg, sizeof(hp))) + if (copy_from_user(&hp, (void __user *)arg, sizeof(hp))) return -EFAULT; hpk.hpk_fid = hp.hp_fid; @@ -1811,7 +1814,7 @@ out_quotactl: return rc; } case LL_IOC_HSM_CT_START: - rc = copy_and_ioctl(cmd, sbi->ll_md_exp, (void *)arg, + rc = copy_and_ioctl(cmd, sbi->ll_md_exp, (void __user *)arg, sizeof(struct lustre_kernelcomm)); return rc; @@ -1819,12 +1822,12 @@ out_quotactl: struct hsm_copy *copy; int rc; - copy = memdup_user((char *)arg, sizeof(*copy)); + copy = memdup_user((char __user *)arg, sizeof(*copy)); if (IS_ERR(copy)) return PTR_ERR(copy); rc = ll_ioc_copy_start(inode->i_sb, copy); - if (copy_to_user((char *)arg, copy, sizeof(*copy))) + if (copy_to_user((char __user *)arg, copy, sizeof(*copy))) rc = -EFAULT; kfree(copy); @@ -1834,19 +1837,20 @@ out_quotactl: struct hsm_copy *copy; int rc; - copy = memdup_user((char *)arg, sizeof(*copy)); + copy = memdup_user((char __user *)arg, sizeof(*copy)); if (IS_ERR(copy)) return PTR_ERR(copy); rc = ll_ioc_copy_end(inode->i_sb, copy); - if (copy_to_user((char *)arg, copy, sizeof(*copy))) + if (copy_to_user((char __user *)arg, copy, sizeof(*copy))) rc = -EFAULT; kfree(copy); return rc; } default: - return obd_iocontrol(cmd, sbi->ll_dt_exp, 0, NULL, (void *)arg); + return obd_iocontrol(cmd, sbi->ll_dt_exp, 0, NULL, + (void __user *)arg); } } diff --git a/drivers/staging/lustre/lustre/llite/file.c b/drivers/staging/lustre/lustre/llite/file.c index 39e2ffd..132d19b 100644 --- a/drivers/staging/lustre/lustre/llite/file.c +++ b/drivers/staging/lustre/lustre/llite/file.c @@ -1307,7 +1307,7 @@ static int ll_lov_recreate_obj(struct inode *inode, unsigned long arg) if (!capable(CFS_CAP_SYS_ADMIN)) return -EPERM; - if (copy_from_user(&ucreat, (struct ll_recreate_obj *)arg, + if (copy_from_user(&ucreat, (struct ll_recreate_obj __user *)arg, sizeof(ucreat))) return -EFAULT; @@ -1325,7 +1325,7 @@ static int ll_lov_recreate_fid(struct inode *inode, unsigned long arg) if (!capable(CFS_CAP_SYS_ADMIN)) return -EPERM; - if (copy_from_user(&fid, (struct lu_fid *)arg, sizeof(fid))) + if (copy_from_user(&fid, (struct lu_fid __user *)arg, sizeof(fid))) return -EFAULT; fid_to_ostid(&fid, &oi); @@ -1472,7 +1472,7 @@ static int ll_lov_setea(struct inode *inode, struct file *file, if (lump == NULL) return -ENOMEM; - if (copy_from_user(lump, (struct lov_user_md *)arg, lum_size)) { + if (copy_from_user(lump, (struct lov_user_md __user *)arg, lum_size)) { kvfree(lump); return -EFAULT; } @@ -1488,12 +1488,12 @@ static int ll_lov_setea(struct inode *inode, struct file *file, static int ll_lov_setstripe(struct inode *inode, struct file *file, unsigned long arg) { - struct lov_user_md_v3 lumv3; - struct lov_user_md_v1 *lumv1 = (struct lov_user_md_v1 *)&lumv3; - struct lov_user_md_v1 *lumv1p = (struct lov_user_md_v1 *)arg; - struct lov_user_md_v3 *lumv3p = (struct lov_user_md_v3 *)arg; - int lum_size, rc; - int flags = FMODE_WRITE; + struct lov_user_md_v3 lumv3; + struct lov_user_md_v1 *lumv1 = (struct lov_user_md_v1 *)&lumv3; + struct lov_user_md_v1 __user *lumv1p = (void __user *)arg; + struct lov_user_md_v3 __user *lumv3p = (void __user *)arg; + int lum_size, rc; + int flags = FMODE_WRITE; /* first try with v1 which is smaller than v3 */ lum_size = sizeof(struct lov_user_md_v1); @@ -1518,7 +1518,7 @@ static int ll_lov_setstripe(struct inode *inode, struct file *file, ll_layout_refresh(inode, &gen); lsm = ccc_inode_lsm_get(inode); rc = obd_iocontrol(LL_IOC_LOV_GETSTRIPE, ll_i2dtexp(inode), - 0, lsm, (void *)arg); + 0, lsm, (void __user *)arg); ccc_inode_lsm_put(inode, lsm); } return rc; @@ -1532,7 +1532,7 @@ static int ll_lov_getstripe(struct inode *inode, unsigned long arg) lsm = ccc_inode_lsm_get(inode); if (lsm != NULL) rc = obd_iocontrol(LL_IOC_LOV_GETSTRIPE, ll_i2dtexp(inode), 0, - lsm, (void *)arg); + lsm, (void __user *)arg); ccc_inode_lsm_put(inode, lsm); return rc; } @@ -1826,7 +1826,7 @@ static int ll_ioctl_fiemap(struct inode *inode, unsigned long arg) ret_bytes += (fiemap_s->fm_mapped_extents * sizeof(struct ll_fiemap_extent)); - if (copy_to_user((void *)arg, fiemap_s, ret_bytes)) + if (copy_to_user((void __user *)arg, fiemap_s, ret_bytes)) rc = -EFAULT; error: @@ -2211,14 +2211,14 @@ ll_file_ioctl(struct file *file, unsigned int cmd, unsigned long arg) switch (cmd) { case LL_IOC_GETFLAGS: /* Get the current value of the file flags */ - return put_user(fd->fd_flags, (int *)arg); + return put_user(fd->fd_flags, (int __user *)arg); case LL_IOC_SETFLAGS: case LL_IOC_CLRFLAGS: /* Set or clear specific file flags */ /* XXX This probably needs checks to ensure the flags are * not abused, and to handle any flag side effects. */ - if (get_user(flags, (int *) arg)) + if (get_user(flags, (int __user *)arg)) return -EFAULT; if (cmd == LL_IOC_SETFLAGS) { @@ -2242,8 +2242,8 @@ ll_file_ioctl(struct file *file, unsigned int cmd, unsigned long arg) struct file *file2; struct lustre_swap_layouts lsl; - if (copy_from_user(&lsl, (char *)arg, - sizeof(struct lustre_swap_layouts))) + if (copy_from_user(&lsl, (char __user *)arg, + sizeof(struct lustre_swap_layouts))) return -EFAULT; if ((file->f_flags & O_ACCMODE) == 0) /* O_RDONLY */ @@ -2272,13 +2272,13 @@ ll_file_ioctl(struct file *file, unsigned int cmd, unsigned long arg) return ll_iocontrol(inode, file, cmd, arg); case FSFILT_IOC_GETVERSION_OLD: case FSFILT_IOC_GETVERSION: - return put_user(inode->i_generation, (int *)arg); + return put_user(inode->i_generation, (int __user *)arg); case LL_IOC_GROUP_LOCK: return ll_get_grouplock(inode, file, arg); case LL_IOC_GROUP_UNLOCK: return ll_put_grouplock(inode, file, arg); case IOC_OBD_STATFS: - return ll_obd_statfs(inode, (void *)arg); + return ll_obd_statfs(inode, (void __user *)arg); /* We need to special case any other ioctls we want to handle, * to send them to the MDS/OST as appropriate and to properly @@ -2289,25 +2289,26 @@ ll_file_ioctl(struct file *file, unsigned int cmd, unsigned long arg) case LL_IOC_FLUSHCTX: return ll_flush_ctx(inode); case LL_IOC_PATH2FID: { - if (copy_to_user((void *)arg, ll_inode2fid(inode), + if (copy_to_user((void __user *)arg, ll_inode2fid(inode), sizeof(struct lu_fid))) return -EFAULT; return 0; } case OBD_IOC_FID2PATH: - return ll_fid2path(inode, (void *)arg); + return ll_fid2path(inode, (void __user *)arg); case LL_IOC_DATA_VERSION: { struct ioc_data_version idv; int rc; - if (copy_from_user(&idv, (char *)arg, sizeof(idv))) + if (copy_from_user(&idv, (char __user *)arg, sizeof(idv))) return -EFAULT; rc = ll_data_version(inode, &idv.idv_version, !(idv.idv_flags & LL_DV_NOFLUSH)); - if (rc == 0 && copy_to_user((char *) arg, &idv, sizeof(idv))) + if (rc == 0 && copy_to_user((char __user *)arg, &idv, + sizeof(idv))) return -EFAULT; return rc; @@ -2320,7 +2321,7 @@ ll_file_ioctl(struct file *file, unsigned int cmd, unsigned long arg) if (mdtidx < 0) return mdtidx; - if (put_user((int)mdtidx, (int *)arg)) + if (put_user(mdtidx, (int __user *)arg)) return -EFAULT; return 0; @@ -2347,7 +2348,7 @@ ll_file_ioctl(struct file *file, unsigned int cmd, unsigned long arg) rc = obd_iocontrol(cmd, ll_i2mdexp(inode), sizeof(*op_data), op_data, NULL); - if (copy_to_user((void *)arg, hus, sizeof(*hus))) + if (copy_to_user((void __user *)arg, hus, sizeof(*hus))) rc = -EFAULT; ll_finish_md_op_data(op_data); @@ -2358,7 +2359,7 @@ ll_file_ioctl(struct file *file, unsigned int cmd, unsigned long arg) struct hsm_state_set *hss; int rc; - hss = memdup_user((char *)arg, sizeof(*hss)); + hss = memdup_user((char __user *)arg, sizeof(*hss)); if (IS_ERR(hss)) return PTR_ERR(hss); @@ -2386,7 +2387,7 @@ ll_file_ioctl(struct file *file, unsigned int cmd, unsigned long arg) rc = obd_iocontrol(cmd, ll_i2mdexp(inode), sizeof(*op_data), op_data, NULL); - if (copy_to_user((char *)arg, hca, sizeof(*hca))) + if (copy_to_user((char __user *)arg, hca, sizeof(*hca))) rc = -EFAULT; ll_finish_md_op_data(op_data); @@ -2480,7 +2481,7 @@ ll_file_ioctl(struct file *file, unsigned int cmd, unsigned long arg) case LL_IOC_HSM_IMPORT: { struct hsm_user_import *hui; - hui = memdup_user((void *)arg, sizeof(*hui)); + hui = memdup_user((void __user *)arg, sizeof(*hui)); if (IS_ERR(hui)) return PTR_ERR(hui); @@ -2497,7 +2498,7 @@ ll_file_ioctl(struct file *file, unsigned int cmd, unsigned long arg) return err; return obd_iocontrol(cmd, ll_i2dtexp(inode), 0, NULL, - (void *)arg); + (void __user *)arg); } } } @@ -3033,19 +3034,26 @@ static int ll_fiemap(struct inode *inode, struct fiemap_extent_info *fieinfo, fiemap->fm_extent_count = fieinfo->fi_extents_max; fiemap->fm_start = start; fiemap->fm_length = len; - if (extent_count > 0) - memcpy(&fiemap->fm_extents[0], fieinfo->fi_extents_start, - sizeof(struct ll_fiemap_extent)); + if (extent_count > 0 && + copy_from_user(&fiemap->fm_extents[0], fieinfo->fi_extents_start, + sizeof(struct ll_fiemap_extent)) != 0) { + rc = -EFAULT; + goto out; + } rc = ll_do_fiemap(inode, fiemap, num_bytes); fieinfo->fi_flags = fiemap->fm_flags; fieinfo->fi_extents_mapped = fiemap->fm_mapped_extents; - if (extent_count > 0) - memcpy(fieinfo->fi_extents_start, &fiemap->fm_extents[0], - fiemap->fm_mapped_extents * - sizeof(struct ll_fiemap_extent)); + if (extent_count > 0 && + copy_to_user(fieinfo->fi_extents_start, &fiemap->fm_extents[0], + fiemap->fm_mapped_extents * + sizeof(struct ll_fiemap_extent)) != 0) { + rc = -EFAULT; + goto out; + } +out: kvfree(fiemap); return rc; } diff --git a/drivers/staging/lustre/lustre/llite/llite_internal.h b/drivers/staging/lustre/lustre/llite/llite_internal.h index 845e992..29c325d 100644 --- a/drivers/staging/lustre/lustre/llite/llite_internal.h +++ b/drivers/staging/lustre/lustre/llite/llite_internal.h @@ -782,7 +782,7 @@ int ll_show_options(struct seq_file *seq, struct dentry *dentry); void ll_dirty_page_discard_warn(struct page *page, int ioret); int ll_prep_inode(struct inode **inode, struct ptlrpc_request *req, struct super_block *, struct lookup_intent *); -int ll_obd_statfs(struct inode *inode, void *arg); +int ll_obd_statfs(struct inode *inode, void __user *arg); int ll_get_max_mdsize(struct ll_sb_info *sbi, int *max_mdsize); int ll_get_default_mdsize(struct ll_sb_info *sbi, int *default_mdsize); int ll_process_config(struct lustre_cfg *lcfg); @@ -796,7 +796,7 @@ char *ll_get_fsname(struct super_block *sb, char *buf, int buflen); void ll_open_cleanup(struct super_block *sb, struct ptlrpc_request *open_req); /* llite/llite_nfs.c */ -extern struct export_operations lustre_export_operations; +extern const struct export_operations lustre_export_operations; __u32 get_uuid2int(const char *name, int len); void get_uuid2fsid(const char *name, int len, __kernel_fsid_t *fsid); struct inode *search_inode_for_lustre(struct super_block *sb, diff --git a/drivers/staging/lustre/lustre/llite/llite_lib.c b/drivers/staging/lustre/lustre/llite/llite_lib.c index b2fc5b3..446e4b8 100644 --- a/drivers/staging/lustre/lustre/llite/llite_lib.c +++ b/drivers/staging/lustre/lustre/llite/llite_lib.c @@ -1744,14 +1744,14 @@ int ll_iocontrol(struct inode *inode, struct file *file, ptlrpc_req_finished(req); - return put_user(flags, (int *)arg); + return put_user(flags, (int __user *)arg); } case FSFILT_IOC_SETFLAGS: { struct lov_stripe_md *lsm; struct obd_info oinfo = { }; struct md_op_data *op_data; - if (get_user(flags, (int *)arg)) + if (get_user(flags, (int __user *)arg)) return -EFAULT; op_data = ll_prep_md_op_data(NULL, inode, NULL, NULL, 0, 0, @@ -2019,14 +2019,13 @@ cleanup: return rc; } -int ll_obd_statfs(struct inode *inode, void *arg) +int ll_obd_statfs(struct inode *inode, void __user *arg) { struct ll_sb_info *sbi = NULL; struct obd_export *exp; char *buf = NULL; struct obd_ioctl_data *data = NULL; __u32 type; - __u32 flags; int len = 0, rc; if (!inode) { @@ -2069,8 +2068,7 @@ int ll_obd_statfs(struct inode *inode, void *arg) goto out_statfs; } - flags = (type & LL_STATFS_NODELAY) ? OBD_STATFS_NODELAY : 0; - rc = obd_iocontrol(IOC_OBD_STATFS, exp, len, buf, &flags); + rc = obd_iocontrol(IOC_OBD_STATFS, exp, len, buf, NULL); if (rc) goto out_statfs; out_statfs: @@ -2221,8 +2219,8 @@ int ll_get_obd_name(struct inode *inode, unsigned int cmd, unsigned long arg) if (!obd) return -ENOENT; - if (copy_to_user((void *)arg, obd->obd_name, - strlen(obd->obd_name) + 1)) + if (copy_to_user((void __user *)arg, obd->obd_name, + strlen(obd->obd_name) + 1)) return -EFAULT; return 0; diff --git a/drivers/staging/lustre/lustre/llite/llite_nfs.c b/drivers/staging/lustre/lustre/llite/llite_nfs.c index 18aab25..9f64dd1 100644 --- a/drivers/staging/lustre/lustre/llite/llite_nfs.c +++ b/drivers/staging/lustre/lustre/llite/llite_nfs.c @@ -323,7 +323,7 @@ static struct dentry *ll_get_parent(struct dentry *dchild) return result; } -struct export_operations lustre_export_operations = { +const struct export_operations lustre_export_operations = { .get_parent = ll_get_parent, .encode_fh = ll_encode_fh, .get_name = ll_get_name, diff --git a/drivers/staging/lustre/lustre/llite/lloop.c b/drivers/staging/lustre/lustre/llite/lloop.c index 871924b..69c41af 100644 --- a/drivers/staging/lustre/lustre/llite/lloop.c +++ b/drivers/staging/lustre/lustre/llite/lloop.c @@ -636,7 +636,7 @@ static int lo_ioctl(struct block_device *bdev, fmode_t mode, else fid_zero(&fid); - if (copy_to_user((struct lu_fid *)arg, &fid, sizeof(fid))) + if (copy_to_user((void __user *)arg, &fid, sizeof(fid))) err = -EFAULT; break; } @@ -708,7 +708,7 @@ static enum llioc_iter lloop_ioctl(struct inode *unused, struct file *file, dev = MKDEV(lloop_major, lo->lo_number); /* quit if the used pointer is writable */ - if (put_user((long)old_encode_dev(dev), (long *)arg)) { + if (put_user((long)old_encode_dev(dev), (long __user *)arg)) { err = -EFAULT; goto out; } diff --git a/drivers/staging/lustre/lustre/llite/rw.c b/drivers/staging/lustre/lustre/llite/rw.c index f355474..6b587d6 100644 --- a/drivers/staging/lustre/lustre/llite/rw.c +++ b/drivers/staging/lustre/lustre/llite/rw.c @@ -764,7 +764,6 @@ int ll_readahead(const struct lu_env *env, struct cl_io *io, ret = ll_read_ahead_pages(env, io, queue, ria, &reserved, mapping, &ra_end); - LASSERTF(reserved >= 0, "reserved %lu\n", reserved); if (reserved != 0) ll_ra_count_put(ll_i2sbi(inode), reserved); diff --git a/drivers/staging/lustre/lustre/lmv/lmv_obd.c b/drivers/staging/lustre/lustre/lmv/lmv_obd.c index bbafe0a..733222c 100644 --- a/drivers/staging/lustre/lustre/lmv/lmv_obd.c +++ b/drivers/staging/lustre/lustre/lmv/lmv_obd.c @@ -53,6 +53,7 @@ #include "../include/lprocfs_status.h" #include "../include/lustre_lite.h" #include "../include/lustre_fid.h" +#include "../include/lustre_kernelcomm.h" #include "lmv_internal.h" static void lmv_activate_target(struct lmv_obd *lmv, @@ -662,7 +663,8 @@ out_local: return rc; } -static int lmv_fid2path(struct obd_export *exp, int len, void *karg, void *uarg) +static int lmv_fid2path(struct obd_export *exp, int len, void *karg, + void __user *uarg) { struct obd_device *obddev = class_exp2obd(exp); struct lmv_obd *lmv = &obddev->u.lmv; @@ -792,9 +794,11 @@ static void lmv_hsm_req_build(struct lmv_obd *lmv, } static int lmv_hsm_ct_unregister(struct lmv_obd *lmv, unsigned int cmd, int len, - struct lustre_kernelcomm *lk, void *uarg) + struct lustre_kernelcomm *lk, + void __user *uarg) { - int i, rc = 0; + int rc = 0; + __u32 i; /* unregister request (call from llapi_hsm_copytool_fini) */ for (i = 0; i < lmv->desc.ld_tgt_count; i++) { @@ -808,16 +812,18 @@ static int lmv_hsm_ct_unregister(struct lmv_obd *lmv, unsigned int cmd, int len, * and will unregister automatically. */ rc = libcfs_kkuc_group_rem(lk->lk_uid, lk->lk_group); + return rc; } static int lmv_hsm_ct_register(struct lmv_obd *lmv, unsigned int cmd, int len, - struct lustre_kernelcomm *lk, void *uarg) + struct lustre_kernelcomm *lk, void __user *uarg) { - struct file *filp; - int i, j, err; - int rc = 0; - bool any_set = false; + struct file *filp; + __u32 i, j; + int err, rc = 0; + bool any_set = false; + struct kkuc_ct_data kcd = { 0 }; /* All or nothing: try to register to all MDS. * In case of failure, unregister from previous MDS, @@ -854,17 +860,25 @@ static int lmv_hsm_ct_register(struct lmv_obd *lmv, unsigned int cmd, int len, /* at least one registration done, with no failure */ filp = fget(lk->lk_wfd); - if (filp == NULL) { + if (!filp) return -EBADF; + + kcd.kcd_magic = KKUC_CT_DATA_MAGIC; + kcd.kcd_uuid = lmv->cluuid; + kcd.kcd_archive = lk->lk_data; + + rc = libcfs_kkuc_group_add(filp, lk->lk_uid, lk->lk_group, + &kcd, sizeof(kcd)); + if (rc) { + if (filp) + fput(filp); } - rc = libcfs_kkuc_group_add(filp, lk->lk_uid, lk->lk_group, lk->lk_data); - if (rc != 0 && filp != NULL) - fput(filp); + return rc; } static int lmv_iocontrol(unsigned int cmd, struct obd_export *exp, - int len, void *karg, void *uarg) + int len, void *karg, void __user *uarg) { struct obd_device *obddev = class_exp2obd(exp); struct lmv_obd *lmv = &obddev->u.lmv; diff --git a/drivers/staging/lustre/lustre/lov/lov_dev.c b/drivers/staging/lustre/lustre/lov/lov_dev.c index 3733fdc..2c33cbc 100644 --- a/drivers/staging/lustre/lustre/lov/lov_dev.c +++ b/drivers/staging/lustre/lustre/lov/lov_dev.c @@ -334,7 +334,7 @@ static struct lov_device_emerg **lov_emerg_alloc(int nr) emerg[i] = em; cl_page_list_init(&em->emrg_page_list); em->emrg_env = cl_env_alloc(&em->emrg_refcheck, - LCT_REMEMBER|LCT_NOREF); + LCT_REMEMBER | LCT_NOREF); if (!IS_ERR(em->emrg_env)) em->emrg_env->le_ctx.lc_cookie = 0x2; else { diff --git a/drivers/staging/lustre/lustre/lov/lov_internal.h b/drivers/staging/lustre/lustre/lov/lov_internal.h index 2d00bad..f8e92fe 100644 --- a/drivers/staging/lustre/lustre/lov/lov_internal.h +++ b/drivers/staging/lustre/lustre/lov/lov_internal.h @@ -197,7 +197,7 @@ int lov_packmd(struct obd_export *exp, struct lov_mds_md **lmm, int lov_unpackmd(struct obd_export *exp, struct lov_stripe_md **lsmp, struct lov_mds_md *lmm, int lmm_bytes); int lov_getstripe(struct obd_export *exp, - struct lov_stripe_md *lsm, struct lov_user_md *lump); + struct lov_stripe_md *lsm, struct lov_user_md __user *lump); int lov_alloc_memmd(struct lov_stripe_md **lsmp, __u16 stripe_count, int pattern, int magic); int lov_free_memmd(struct lov_stripe_md **lsmp); diff --git a/drivers/staging/lustre/lustre/lov/lov_obd.c b/drivers/staging/lustre/lustre/lov/lov_obd.c index 6c2bdfe..65077b7 100644 --- a/drivers/staging/lustre/lustre/lov/lov_obd.c +++ b/drivers/staging/lustre/lustre/lov/lov_obd.c @@ -1385,7 +1385,7 @@ static int lov_statfs(const struct lu_env *env, struct obd_export *exp, } static int lov_iocontrol(unsigned int cmd, struct obd_export *exp, int len, - void *karg, void *uarg) + void *karg, void __user *uarg) { struct obd_device *obddev = class_exp2obd(exp); struct lov_obd *lov = &obddev->u.lov; @@ -1420,7 +1420,9 @@ static int lov_iocontrol(unsigned int cmd, struct obd_export *exp, int len, (int) sizeof(struct obd_uuid)))) return -EFAULT; - flags = uarg ? *(__u32 *)uarg : 0; + memcpy(&flags, data->ioc_inlbuf1, sizeof(__u32)); + flags = flags & LL_STATFS_NODELAY ? OBD_STATFS_NODELAY : 0; + /* got statfs data */ rc = obd_statfs(NULL, lov->lov_tgts[index]->ltd_exp, &stat_buf, cfs_time_shift_64(-OBD_STATFS_CACHE_SECONDS), diff --git a/drivers/staging/lustre/lustre/lov/lov_pack.c b/drivers/staging/lustre/lustre/lov/lov_pack.c index 6b2d100..a78211f 100644 --- a/drivers/staging/lustre/lustre/lov/lov_pack.c +++ b/drivers/staging/lustre/lustre/lov/lov_pack.c @@ -376,7 +376,7 @@ int lov_unpackmd(struct obd_export *exp, struct lov_stripe_md **lsmp, * lmm_magic must be LOV_USER_MAGIC. */ int lov_getstripe(struct obd_export *exp, struct lov_stripe_md *lsm, - struct lov_user_md *lump) + struct lov_user_md __user *lump) { /* * XXX huge struct allocated on stack. diff --git a/drivers/staging/lustre/lustre/mdc/mdc_request.c b/drivers/staging/lustre/lustre/mdc/mdc_request.c index 57e0fc1..4348127 100644 --- a/drivers/staging/lustre/lustre/mdc/mdc_request.c +++ b/drivers/staging/lustre/lustre/mdc/mdc_request.c @@ -48,6 +48,7 @@ #include "../include/lprocfs_status.h" #include "../include/lustre_param.h" #include "../include/lustre_log.h" +#include "../include/lustre_kernelcomm.h" #include "mdc_internal.h" @@ -1721,7 +1722,7 @@ static int mdc_ioc_swap_layouts(struct obd_export *exp, } static int mdc_iocontrol(unsigned int cmd, struct obd_export *exp, int len, - void *karg, void *uarg) + void *karg, void __user *uarg) { struct obd_device *obd = exp->exp_obd; struct obd_ioctl_data *data = karg; @@ -2013,21 +2014,27 @@ static int mdc_hsm_copytool_send(int len, void *val) /** * callback function passed to kuc for re-registering each HSM copytool * running on MDC, after MDT shutdown/recovery. - * @param data archive id served by the copytool + * @param data copytool registration data * @param cb_arg callback argument (obd_import) */ -static int mdc_hsm_ct_reregister(__u32 data, void *cb_arg) +static int mdc_hsm_ct_reregister(void *data, void *cb_arg) { + struct kkuc_ct_data *kcd = data; struct obd_import *imp = (struct obd_import *)cb_arg; - __u32 archive = data; int rc; - CDEBUG(D_HA, "recover copytool registration to MDT (archive=%#x)\n", - archive); - rc = mdc_ioc_hsm_ct_register(imp, archive); + if (!kcd || kcd->kcd_magic != KKUC_CT_DATA_MAGIC) + return -EPROTO; + + if (!obd_uuid_equals(&kcd->kcd_uuid, &imp->imp_obd->obd_uuid)) + return 0; + + CDEBUG(D_HA, "%s: recover copytool registration to MDT (archive=%#x)\n", + imp->imp_obd->obd_name, kcd->kcd_archive); + rc = mdc_ioc_hsm_ct_register(imp, kcd->kcd_archive); /* ignore error if the copytool is already registered */ - return ((rc != 0) && (rc != -EEXIST)) ? rc : 0; + return (rc == -EEXIST) ? 0 : rc; } static int mdc_set_info_async(const struct lu_env *env, diff --git a/drivers/staging/lustre/lustre/obdclass/Makefile b/drivers/staging/lustre/lustre/obdclass/Makefile index acc6857..c404eb3 100644 --- a/drivers/staging/lustre/lustre/obdclass/Makefile +++ b/drivers/staging/lustre/lustre/obdclass/Makefile @@ -2,8 +2,8 @@ obj-$(CONFIG_LUSTRE_FS) += obdclass.o obdclass-y := linux/linux-module.o linux/linux-obdo.o linux/linux-sysctl.o \ llog.o llog_cat.o llog_obd.o llog_swab.o class_obd.o debug.o \ - genops.o uuid.o lprocfs_status.o \ - lustre_handles.o lustre_peer.o \ - statfs_pack.o obdo.o obd_config.o obd_mount.o \ - lu_object.o cl_object.o \ - cl_page.o cl_lock.o cl_io.o lu_ref.o acl.o lprocfs_counters.o + genops.o uuid.o lprocfs_status.o lprocfs_counters.o \ + lustre_handles.o lustre_peer.o statfs_pack.o \ + obdo.o obd_config.o obd_mount.o lu_object.o lu_ref.o \ + cl_object.o cl_page.o cl_lock.o cl_io.o \ + acl.o kernelcomm.o diff --git a/drivers/staging/lustre/lustre/obdclass/class_obd.c b/drivers/staging/lustre/lustre/obdclass/class_obd.c index 0975e44..65cf46c 100644 --- a/drivers/staging/lustre/lustre/obdclass/class_obd.c +++ b/drivers/staging/lustre/lustre/obdclass/class_obd.c @@ -180,7 +180,7 @@ int class_handle_ioctl(unsigned int cmd, unsigned long arg) } CDEBUG(D_IOCTL, "cmd = %x\n", cmd); - if (obd_ioctl_getdata(&buf, &len, (void *)arg)) { + if (obd_ioctl_getdata(&buf, &len, (void __user *)arg)) { CERROR("OBD ioctl: data error\n"); return -EINVAL; } @@ -227,7 +227,7 @@ int class_handle_ioctl(unsigned int cmd, unsigned long arg) memcpy(data->ioc_bulk, BUILD_VERSION, strlen(BUILD_VERSION) + 1); - err = obd_ioctl_popdata((void *)arg, data, len); + err = obd_ioctl_popdata((void __user *)arg, data, len); if (err) err = -EFAULT; goto out; @@ -246,7 +246,8 @@ int class_handle_ioctl(unsigned int cmd, unsigned long arg) goto out; } - err = obd_ioctl_popdata((void *)arg, data, sizeof(*data)); + err = obd_ioctl_popdata((void __user *)arg, data, + sizeof(*data)); if (err) err = -EFAULT; goto out; @@ -283,7 +284,8 @@ int class_handle_ioctl(unsigned int cmd, unsigned long arg) CDEBUG(D_IOCTL, "device name %s, dev %d\n", data->ioc_inlbuf1, dev); - err = obd_ioctl_popdata((void *)arg, data, sizeof(*data)); + err = obd_ioctl_popdata((void __user *)arg, data, + sizeof(*data)); if (err) err = -EFAULT; goto out; @@ -330,7 +332,7 @@ int class_handle_ioctl(unsigned int cmd, unsigned long arg) (int)index, status, obd->obd_type->typ_name, obd->obd_name, obd->obd_uuid.uuid, atomic_read(&obd->obd_refcount)); - err = obd_ioctl_popdata((void *)arg, data, len); + err = obd_ioctl_popdata((void __user *)arg, data, len); err = 0; goto out; @@ -388,7 +390,7 @@ int class_handle_ioctl(unsigned int cmd, unsigned long arg) if (err) goto out; - err = obd_ioctl_popdata((void *)arg, data, len); + err = obd_ioctl_popdata((void __user *)arg, data, len); if (err) err = -EFAULT; goto out; diff --git a/drivers/staging/lustre/lustre/obdclass/genops.c b/drivers/staging/lustre/lustre/obdclass/genops.c index 228c44c..5665655 100644 --- a/drivers/staging/lustre/lustre/obdclass/genops.c +++ b/drivers/staging/lustre/lustre/obdclass/genops.c @@ -42,6 +42,7 @@ #define DEBUG_SUBSYSTEM S_CLASS #include "../include/obd_class.h" #include "../include/lprocfs_status.h" +#include "../include/lustre_kernelcomm.h" spinlock_t obd_types_lock; diff --git a/drivers/staging/lustre/lustre/libcfs/kernel_user_comm.c b/drivers/staging/lustre/lustre/obdclass/kernelcomm.c index d8230ae..be4867c 100644 --- a/drivers/staging/lustre/lustre/libcfs/kernel_user_comm.c +++ b/drivers/staging/lustre/lustre/obdclass/kernelcomm.c @@ -42,9 +42,8 @@ #define DEBUG_SUBSYSTEM S_CLASS #define D_KUC D_OTHER -#include "../../include/linux/libcfs/libcfs.h" - -/* This is the kernel side (liblustre as well). */ +#include "../include/obd_support.h" +#include "../include/lustre_kernelcomm.h" /** * libcfs_kkuc_msg_put - send an message from kernel to userspace @@ -58,14 +57,14 @@ int libcfs_kkuc_msg_put(struct file *filp, void *payload) ssize_t count = kuch->kuc_msglen; loff_t offset = 0; mm_segment_t fs; - int rc = -ENOSYS; + int rc = -ENXIO; - if (filp == NULL || IS_ERR(filp)) + if (!filp || IS_ERR(filp)) return -EBADF; if (kuch->kuc_magic != KUC_MAGIC) { CERROR("KernelComm: bad magic %x\n", kuch->kuc_magic); - return -ENOSYS; + return rc; } fs = get_fs(); @@ -90,18 +89,20 @@ int libcfs_kkuc_msg_put(struct file *filp, void *payload) } EXPORT_SYMBOL(libcfs_kkuc_msg_put); -/* Broadcast groups are global across all mounted filesystems; +/* + * Broadcast groups are global across all mounted filesystems; * i.e. registering for a group on 1 fs will get messages for that - * group from any fs */ + * group from any fs + */ /** A single group registration has a uid and a file pointer */ struct kkuc_reg { - struct list_head kr_chain; - int kr_uid; + struct list_head kr_chain; + int kr_uid; struct file *kr_fp; - __u32 kr_data; + char kr_data[0]; }; -static struct list_head kkuc_groups[KUC_GRP_MAX+1] = {}; +static struct list_head kkuc_groups[KUC_GRP_MAX + 1] = {}; /* Protect message sending against remove and adds */ static DECLARE_RWSEM(kg_sem); @@ -109,9 +110,10 @@ static DECLARE_RWSEM(kg_sem); * @param filp pipe to write into * @param uid identifier for this receiver * @param group group number + * @param data user data */ int libcfs_kkuc_group_add(struct file *filp, int uid, unsigned int group, - __u32 data) + void *data, size_t data_len) { struct kkuc_reg *reg; @@ -121,20 +123,20 @@ int libcfs_kkuc_group_add(struct file *filp, int uid, unsigned int group, } /* fput in group_rem */ - if (filp == NULL) + if (!filp) return -EBADF; /* freed in group_rem */ - reg = kmalloc(sizeof(*reg), 0); - if (reg == NULL) + reg = kmalloc(sizeof(*reg) + data_len, 0); + if (!reg) return -ENOMEM; reg->kr_fp = filp; reg->kr_uid = uid; - reg->kr_data = data; + memcpy(reg->kr_data, data, data_len); down_write(&kg_sem); - if (kkuc_groups[group].next == NULL) + if (!kkuc_groups[group].next) INIT_LIST_HEAD(&kkuc_groups[group]); list_add(®->kr_chain, &kkuc_groups[group]); up_write(&kg_sem); @@ -145,14 +147,14 @@ int libcfs_kkuc_group_add(struct file *filp, int uid, unsigned int group, } EXPORT_SYMBOL(libcfs_kkuc_group_add); -int libcfs_kkuc_group_rem(int uid, int group) +int libcfs_kkuc_group_rem(int uid, unsigned int group) { struct kkuc_reg *reg, *next; - if (kkuc_groups[group].next == NULL) + if (!kkuc_groups[group].next) return 0; - if (uid == 0) { + if (!uid) { /* Broadcast a shutdown message */ struct kuc_hdr lh; @@ -165,11 +167,11 @@ int libcfs_kkuc_group_rem(int uid, int group) down_write(&kg_sem); list_for_each_entry_safe(reg, next, &kkuc_groups[group], kr_chain) { - if ((uid == 0) || (uid == reg->kr_uid)) { + if (!uid || (uid == reg->kr_uid)) { list_del(®->kr_chain); CDEBUG(D_KUC, "Removed uid=%d fp=%p from group %d\n", reg->kr_uid, reg->kr_fp, group); - if (reg->kr_fp != NULL) + if (reg->kr_fp) fput(reg->kr_fp); kfree(reg); } @@ -180,28 +182,30 @@ int libcfs_kkuc_group_rem(int uid, int group) } EXPORT_SYMBOL(libcfs_kkuc_group_rem); -int libcfs_kkuc_group_put(int group, void *payload) +int libcfs_kkuc_group_put(unsigned int group, void *payload) { struct kkuc_reg *reg; - int rc = 0; + int rc = 0; int one_success = 0; - down_read(&kg_sem); + down_write(&kg_sem); list_for_each_entry(reg, &kkuc_groups[group], kr_chain) { - if (reg->kr_fp != NULL) { + if (reg->kr_fp) { rc = libcfs_kkuc_msg_put(reg->kr_fp, payload); - if (rc == 0) + if (!rc) { one_success = 1; - else if (rc == -EPIPE) { + } else if (rc == -EPIPE) { fput(reg->kr_fp); reg->kr_fp = NULL; } } } - up_read(&kg_sem); + up_write(&kg_sem); - /* don't return an error if the message has been delivered - * at least to one agent */ + /* + * don't return an error if the message has been delivered + * at least to one agent + */ if (one_success) rc = 0; @@ -213,9 +217,9 @@ EXPORT_SYMBOL(libcfs_kkuc_group_put); * Calls a callback function for each link of the given kuc group. * @param group the group to call the function on. * @param cb_func the function to be called. - * @param cb_arg iextra argument to be passed to the callback function. + * @param cb_arg extra argument to be passed to the callback function. */ -int libcfs_kkuc_group_foreach(int group, libcfs_kkuc_cb_t cb_func, +int libcfs_kkuc_group_foreach(unsigned int group, libcfs_kkuc_cb_t cb_func, void *cb_arg) { struct kkuc_reg *reg; @@ -227,15 +231,15 @@ int libcfs_kkuc_group_foreach(int group, libcfs_kkuc_cb_t cb_func, } /* no link for this group */ - if (kkuc_groups[group].next == NULL) + if (!kkuc_groups[group].next) return 0; - down_write(&kg_sem); + down_read(&kg_sem); list_for_each_entry(reg, &kkuc_groups[group], kr_chain) { - if (reg->kr_fp != NULL) + if (reg->kr_fp) rc = cb_func(reg->kr_data, cb_arg); } - up_write(&kg_sem); + up_read(&kg_sem); return rc; } diff --git a/drivers/staging/lustre/lustre/obdclass/linux/linux-module.c b/drivers/staging/lustre/lustre/obdclass/linux/linux-module.c index a055cbb..1913f3e 100644 --- a/drivers/staging/lustre/lustre/obdclass/linux/linux-module.c +++ b/drivers/staging/lustre/lustre/obdclass/linux/linux-module.c @@ -74,14 +74,14 @@ #include "../../include/lustre/lustre_build_version.h" /* buffer MUST be at least the size of obd_ioctl_hdr */ -int obd_ioctl_getdata(char **buf, int *len, void *arg) +int obd_ioctl_getdata(char **buf, int *len, void __user *arg) { struct obd_ioctl_hdr hdr; struct obd_ioctl_data *data; int err; int offset = 0; - if (copy_from_user(&hdr, (void *)arg, sizeof(hdr))) + if (copy_from_user(&hdr, arg, sizeof(hdr))) return -EFAULT; if (hdr.ioc_version != OBD_IOCTL_VERSION) { @@ -114,7 +114,7 @@ int obd_ioctl_getdata(char **buf, int *len, void *arg) *len = hdr.ioc_len; data = (struct obd_ioctl_data *)*buf; - if (copy_from_user(*buf, (void *)arg, hdr.ioc_len)) { + if (copy_from_user(*buf, arg, hdr.ioc_len)) { err = -EFAULT; goto free_buf; } @@ -144,9 +144,8 @@ int obd_ioctl_getdata(char **buf, int *len, void *arg) offset += cfs_size_round(data->ioc_inllen3); } - if (data->ioc_inllen4) { + if (data->ioc_inllen4) data->ioc_inlbuf4 = &data->ioc_bulk[0] + offset; - } return 0; @@ -156,7 +155,7 @@ free_buf: } EXPORT_SYMBOL(obd_ioctl_getdata); -int obd_ioctl_popdata(void *arg, void *data, int len) +int obd_ioctl_popdata(void __user *arg, void *data, int len) { int err; @@ -240,7 +239,7 @@ static ssize_t health_show(struct kobject *kobj, struct attribute *attr, struct obd_device *obd; obd = class_num2obd(i); - if (obd == NULL || !obd->obd_attached || !obd->obd_set_up) + if (!obd || !obd->obd_attached || !obd->obd_set_up) continue; LASSERT(obd->obd_magic == OBD_DEVICE_MAGIC); @@ -250,9 +249,8 @@ static ssize_t health_show(struct kobject *kobj, struct attribute *attr, class_incref(obd, __func__, current); read_unlock(&obd_dev_lock); - if (obd_health_check(NULL, obd)) { + if (obd_health_check(NULL, obd)) healthy = false; - } class_decref(obd, __func__, current); read_lock(&obd_dev_lock); } @@ -360,7 +358,7 @@ static int obd_device_list_seq_show(struct seq_file *p, void *v) struct obd_device *obd = class_num2obd((int)index); char *status; - if (obd == NULL) + if (!obd) return 0; LASSERT(obd->obd_magic == OBD_DEVICE_MAGIC); @@ -424,7 +422,7 @@ int class_procfs_init(void) struct dentry *file; lustre_kobj = kobject_create_and_add("lustre", fs_kobj); - if (lustre_kobj == NULL) + if (!lustre_kobj) goto out; /* Create the files associated with this kobject */ diff --git a/drivers/staging/lustre/lustre/obdclass/llog_swab.c b/drivers/staging/lustre/lustre/obdclass/llog_swab.c index 3aa7393..8f57a8e 100644 --- a/drivers/staging/lustre/lustre/obdclass/llog_swab.c +++ b/drivers/staging/lustre/lustre/obdclass/llog_swab.c @@ -406,7 +406,5 @@ void lustre_swab_cfg_marker(struct cfg_marker *marker, int swab, int size) __swab64s(&marker->cm_createtime); __swab64s(&marker->cm_canceltime); } - - return; } EXPORT_SYMBOL(lustre_swab_cfg_marker); diff --git a/drivers/staging/lustre/lustre/obdclass/lprocfs_status.c b/drivers/staging/lustre/lustre/obdclass/lprocfs_status.c index 51fe15f..b65ad93 100644 --- a/drivers/staging/lustre/lustre/obdclass/lprocfs_status.c +++ b/drivers/staging/lustre/lustre/obdclass/lprocfs_status.c @@ -1319,8 +1319,8 @@ int lprocfs_write_u64_helper(const char __user *buffer, unsigned long count, } EXPORT_SYMBOL(lprocfs_write_u64_helper); -int lprocfs_write_frac_u64_helper(const char *buffer, unsigned long count, - __u64 *val, int mult) +int lprocfs_write_frac_u64_helper(const char __user *buffer, + unsigned long count, __u64 *val, int mult) { char kernbuf[22], *end, *pbuf; __u64 whole, frac = 0, units; diff --git a/drivers/staging/lustre/lustre/obdecho/echo_client.c b/drivers/staging/lustre/lustre/obdecho/echo_client.c index 7b53f7d..d3e398f 100644 --- a/drivers/staging/lustre/lustre/obdecho/echo_client.c +++ b/drivers/staging/lustre/lustre/obdecho/echo_client.c @@ -60,7 +60,6 @@ struct echo_device { struct cl_site ed_site_myself; struct cl_site *ed_site; struct lu_device *ed_next; - int ed_next_islov; }; struct echo_object { @@ -162,9 +161,6 @@ struct echo_object_conf *cl2echo_conf(const struct cl_object_conf *c) static struct echo_object *cl_echo_object_find(struct echo_device *d, struct lov_stripe_md **lsm); static int cl_echo_object_put(struct echo_object *eco); -static int cl_echo_enqueue(struct echo_object *eco, u64 start, - u64 end, int mode, __u64 *cookie); -static int cl_echo_cancel(struct echo_device *d, __u64 cookie); static int cl_echo_object_brw(struct echo_object *eco, int rw, u64 offset, struct page **pages, int npages, int async); @@ -582,13 +578,13 @@ static struct lu_object *echo_object_alloc(const struct lu_env *env, return obj; } -static struct lu_device_operations echo_device_lu_ops = { +static const struct lu_device_operations echo_device_lu_ops = { .ldo_object_alloc = echo_object_alloc, }; /** @} echo_lu_dev_ops */ -static struct cl_device_operations echo_device_cl_ops = { +static const struct cl_device_operations echo_device_cl_ops = { }; /** \defgroup echo_init Setup and teardown @@ -770,14 +766,6 @@ static struct lu_device *echo_device_alloc(const struct lu_env *env, if (rc) goto out; - /* Tricky case, I have to determine the obd type since - * CLIO uses the different parameters to initialize - * objects for lov & osc. */ - if (strcmp(tgt_type_name, LUSTRE_LOV_NAME) == 0) - ed->ed_next_islov = 1; - else - LASSERT(strcmp(tgt_type_name, - LUSTRE_OSC_NAME) == 0); } else { LASSERT(strcmp(tgt_type_name, LUSTRE_OST_NAME) == 0); } @@ -963,20 +951,11 @@ static struct echo_object *cl_echo_object_find(struct echo_device *d, info = echo_env_info(env); conf = &info->eti_conf; if (d->ed_next) { - if (!d->ed_next_islov) { - struct lov_oinfo *oinfo = lsm->lsm_oinfo[0]; - - LASSERT(oinfo != NULL); - oinfo->loi_oi = lsm->lsm_oi; - conf->eoc_cl.u.coc_oinfo = oinfo; - } else { - struct lustre_md *md; + struct lov_oinfo *oinfo = lsm->lsm_oinfo[0]; - md = &info->eti_md; - memset(md, 0, sizeof(*md)); - md->lsm = lsm; - conf->eoc_cl.u.coc_md = md; - } + LASSERT(oinfo); + oinfo->loi_oi = lsm->lsm_oi; + conf->eoc_cl.u.coc_oinfo = oinfo; } conf->eoc_md = lsmp; @@ -1076,36 +1055,6 @@ static int cl_echo_enqueue0(struct lu_env *env, struct echo_object *eco, return rc; } -static int cl_echo_enqueue(struct echo_object *eco, u64 start, u64 end, - int mode, __u64 *cookie) -{ - struct echo_thread_info *info; - struct lu_env *env; - struct cl_io *io; - int refcheck; - int result; - - env = cl_env_get(&refcheck); - if (IS_ERR(env)) - return PTR_ERR(env); - - info = echo_env_info(env); - io = &info->eti_io; - - io->ci_ignore_layout = 1; - result = cl_io_init(env, io, CIT_MISC, echo_obj2cl(eco)); - if (result < 0) - goto out; - LASSERT(result == 0); - - result = cl_echo_enqueue0(env, eco, start, end, mode, cookie, 0); - cl_io_fini(env, io); - -out: - cl_env_put(env, &refcheck); - return result; -} - static int cl_echo_cancel0(struct lu_env *env, struct echo_device *ed, __u64 cookie) { @@ -1137,22 +1086,6 @@ static int cl_echo_cancel0(struct lu_env *env, struct echo_device *ed, return 0; } -static int cl_echo_cancel(struct echo_device *ed, __u64 cookie) -{ - struct lu_env *env; - int refcheck; - int rc; - - env = cl_env_get(&refcheck); - if (IS_ERR(env)) - return PTR_ERR(env); - - rc = cl_echo_cancel0(env, ed, cookie); - - cl_env_put(env, &refcheck); - return rc; -} - static int cl_echo_async_brw(const struct lu_env *env, struct cl_io *io, enum cl_req_type unused, struct cl_2queue *queue) { @@ -1268,61 +1201,8 @@ out: static u64 last_object_id; -static int -echo_copyout_lsm(struct lov_stripe_md *lsm, void *_ulsm, int ulsm_nob) -{ - struct lov_stripe_md *ulsm = _ulsm; - struct lov_oinfo **p; - int nob, i; - - nob = offsetof(struct lov_stripe_md, lsm_oinfo[lsm->lsm_stripe_count]); - if (nob > ulsm_nob) - return -EINVAL; - - if (copy_to_user(ulsm, lsm, sizeof(*ulsm))) - return -EFAULT; - - for (i = 0, p = lsm->lsm_oinfo; i < lsm->lsm_stripe_count; i++, p++) { - struct lov_oinfo __user *up; - if (get_user(up, ulsm->lsm_oinfo + i) || - copy_to_user(up, *p, sizeof(struct lov_oinfo))) - return -EFAULT; - } - return 0; -} - -static int -echo_copyin_lsm(struct echo_device *ed, struct lov_stripe_md *lsm, - struct lov_stripe_md __user *ulsm, int ulsm_nob) -{ - struct echo_client_obd *ec = ed->ed_ec; - struct lov_oinfo **p; - int i; - - if (ulsm_nob < sizeof(*lsm)) - return -EINVAL; - - if (copy_from_user(lsm, ulsm, sizeof(*lsm))) - return -EFAULT; - - if (lsm->lsm_stripe_count > ec->ec_nstripes || - lsm->lsm_magic != LOV_MAGIC || - (lsm->lsm_stripe_size & (~CFS_PAGE_MASK)) != 0 || - ((__u64)lsm->lsm_stripe_size * lsm->lsm_stripe_count > ~0UL)) - return -EINVAL; - - for (i = 0, p = lsm->lsm_oinfo; i < lsm->lsm_stripe_count; i++, p++) { - struct lov_oinfo __user *up; - if (get_user(up, ulsm->lsm_oinfo + i) || - copy_from_user(*p, up, sizeof(struct lov_oinfo))) - return -EFAULT; - } - return 0; -} - static int echo_create_object(const struct lu_env *env, struct echo_device *ed, - int on_target, struct obdo *oa, void *ulsm, - int ulsm_nob, struct obd_trans_info *oti) + struct obdo *oa, struct obd_trans_info *oti) { struct echo_object *eco; struct echo_client_obd *ec = ed->ed_ec; @@ -1330,9 +1210,7 @@ static int echo_create_object(const struct lu_env *env, struct echo_device *ed, int rc; int created = 0; - if ((oa->o_valid & OBD_MD_FLID) == 0 && /* no obj id */ - (on_target || /* set_stripe */ - ec->ec_nstripes != 0)) { /* LOV */ + if ((oa->o_valid & OBD_MD_FLID) == 0) { /* no obj id */ CERROR("No valid oid\n"); return -EINVAL; } @@ -1343,32 +1221,7 @@ static int echo_create_object(const struct lu_env *env, struct echo_device *ed, goto failed; } - if (ulsm != NULL) { - int i, idx; - - rc = echo_copyin_lsm(ed, lsm, ulsm, ulsm_nob); - if (rc != 0) - goto failed; - - if (lsm->lsm_stripe_count == 0) - lsm->lsm_stripe_count = ec->ec_nstripes; - - if (lsm->lsm_stripe_size == 0) - lsm->lsm_stripe_size = PAGE_CACHE_SIZE; - - idx = cfs_rand(); - - /* setup stripes: indices + default ids if required */ - for (i = 0; i < lsm->lsm_stripe_count; i++) { - if (ostid_id(&lsm->lsm_oinfo[i]->loi_oi) == 0) - lsm->lsm_oinfo[i]->loi_oi = lsm->lsm_oi; - - lsm->lsm_oinfo[i]->loi_ost_idx = - (idx + i) % ec->ec_nstripes; - } - } - - /* setup object ID here for !on_target and LOV hint */ + /* setup object ID here */ if (oa->o_valid & OBD_MD_FLID) { LASSERT(oa->o_valid & OBD_MD_FLGROUP); lsm->lsm_oi = oa->o_oi; @@ -1377,18 +1230,16 @@ static int echo_create_object(const struct lu_env *env, struct echo_device *ed, if (ostid_id(&lsm->lsm_oi) == 0) ostid_set_id(&lsm->lsm_oi, ++last_object_id); - rc = 0; - if (on_target) { - /* Only echo objects are allowed to be created */ - LASSERT((oa->o_valid & OBD_MD_FLGROUP) && - (ostid_seq(&oa->o_oi) == FID_SEQ_ECHO)); - rc = obd_create(env, ec->ec_exp, oa, &lsm, oti); - if (rc != 0) { - CERROR("Cannot create objects: rc = %d\n", rc); - goto failed; - } - created = 1; + /* Only echo objects are allowed to be created */ + LASSERT((oa->o_valid & OBD_MD_FLGROUP) && + (ostid_seq(&oa->o_oi) == FID_SEQ_ECHO)); + + rc = obd_create(env, ec->ec_exp, oa, &lsm, oti); + if (rc != 0) { + CERROR("Cannot create objects: rc = %d\n", rc); + goto failed; } + created = 1; /* See what object ID we were given */ oa->o_oi = lsm->lsm_oi; @@ -1452,37 +1303,7 @@ static void echo_put_object(struct echo_object *eco) } static void -echo_get_stripe_off_id(struct lov_stripe_md *lsm, u64 *offp, u64 *idp) -{ - unsigned long stripe_count; - unsigned long stripe_size; - unsigned long width; - unsigned long woffset; - int stripe_index; - u64 offset; - - if (lsm->lsm_stripe_count <= 1) - return; - - offset = *offp; - stripe_size = lsm->lsm_stripe_size; - stripe_count = lsm->lsm_stripe_count; - - /* width = # bytes in all stripes */ - width = stripe_size * stripe_count; - - /* woffset = offset within a width; offset = whole number of widths */ - woffset = do_div(offset, width); - - stripe_index = woffset / stripe_size; - - *idp = ostid_id(&lsm->lsm_oinfo[stripe_index]->loi_oi); - *offp = offset * stripe_size + woffset % stripe_size; -} - -static void -echo_client_page_debug_setup(struct lov_stripe_md *lsm, - struct page *page, int rw, u64 id, +echo_client_page_debug_setup(struct page *page, int rw, u64 id, u64 offset, u64 count) { char *addr; @@ -1499,7 +1320,6 @@ echo_client_page_debug_setup(struct lov_stripe_md *lsm, if (rw == OBD_BRW_WRITE) { stripe_off = offset + delta; stripe_id = id; - echo_get_stripe_off_id(lsm, &stripe_off, &stripe_id); } else { stripe_off = 0xdeadbeef00c0ffeeULL; stripe_id = 0xdeadbeef00c0ffeeULL; @@ -1511,8 +1331,7 @@ echo_client_page_debug_setup(struct lov_stripe_md *lsm, kunmap(page); } -static int echo_client_page_debug_check(struct lov_stripe_md *lsm, - struct page *page, u64 id, +static int echo_client_page_debug_check(struct page *page, u64 id, u64 offset, u64 count) { u64 stripe_off; @@ -1530,7 +1349,6 @@ static int echo_client_page_debug_check(struct lov_stripe_md *lsm, for (rc = delta = 0; delta < PAGE_CACHE_SIZE; delta += OBD_ECHO_BLOCK_SIZE) { stripe_off = offset + delta; stripe_id = id; - echo_get_stripe_off_id(lsm, &stripe_off, &stripe_id); rc2 = block_debug_check("test_brw", addr + delta, OBD_ECHO_BLOCK_SIZE, @@ -1550,7 +1368,6 @@ static int echo_client_kbrw(struct echo_device *ed, int rw, struct obdo *oa, u64 count, int async, struct obd_trans_info *oti) { - struct lov_stripe_md *lsm = eco->eo_lsm; u32 npages; struct brw_page *pga; struct brw_page *pgp; @@ -1569,8 +1386,6 @@ static int echo_client_kbrw(struct echo_device *ed, int rw, struct obdo *oa, gfp_mask = ((ostid_id(&oa->o_oi) & 2) == 0) ? GFP_KERNEL : GFP_HIGHUSER; LASSERT(rw == OBD_BRW_WRITE || rw == OBD_BRW_READ); - LASSERT(lsm != NULL); - LASSERT(ostid_id(&lsm->lsm_oi) == ostid_id(&oa->o_oi)); if (count <= 0 || (count & (~CFS_PAGE_MASK)) != 0) @@ -1609,7 +1424,7 @@ static int echo_client_kbrw(struct echo_device *ed, int rw, struct obdo *oa, pgp->flag = brw_flags; if (verify) - echo_client_page_debug_setup(lsm, pgp->pg, rw, + echo_client_page_debug_setup(pgp->pg, rw, ostid_id(&oa->o_oi), off, pgp->count); } @@ -1629,7 +1444,7 @@ static int echo_client_kbrw(struct echo_device *ed, int rw, struct obdo *oa, if (verify) { int vrc; - vrc = echo_client_page_debug_check(lsm, pgp->pg, + vrc = echo_client_page_debug_check(pgp->pg, ostid_id(&oa->o_oi), pgp->off, pgp->count); if (vrc != 0 && rc == 0) @@ -1649,7 +1464,6 @@ static int echo_client_prep_commit(const struct lu_env *env, u64 batch, struct obd_trans_info *oti, int async) { - struct lov_stripe_md *lsm = eco->eo_lsm; struct obd_ioobj ioo; struct niobuf_local *lnb; struct niobuf_remote *rnb; @@ -1657,8 +1471,7 @@ static int echo_client_prep_commit(const struct lu_env *env, u64 npages, tot_pages; int i, ret = 0, brw_flags = 0; - if (count <= 0 || (count & (~CFS_PAGE_MASK)) != 0 || - (lsm != NULL && ostid_id(&lsm->lsm_oi) != ostid_id(&oa->o_oi))) + if (count <= 0 || (count & (~CFS_PAGE_MASK)) != 0) return -EINVAL; npages = batch >> PAGE_CACHE_SHIFT; @@ -1717,12 +1530,12 @@ static int echo_client_prep_commit(const struct lu_env *env, continue; if (rw == OBD_BRW_WRITE) - echo_client_page_debug_setup(lsm, page, rw, + echo_client_page_debug_setup(page, rw, ostid_id(&oa->o_oi), rnb[i].offset, rnb[i].len); else - echo_client_page_debug_check(lsm, page, + echo_client_page_debug_check(page, ostid_id(&oa->o_oi), rnb[i].offset, rnb[i].len); @@ -1805,55 +1618,8 @@ static int echo_client_brw_ioctl(const struct lu_env *env, int rw, } static int -echo_client_enqueue(struct obd_export *exp, struct obdo *oa, - int mode, u64 offset, u64 nob) -{ - struct echo_device *ed = obd2echo_dev(exp->exp_obd); - struct lustre_handle *ulh = &oa->o_handle; - struct echo_object *eco; - u64 end; - int rc; - - if (ed->ed_next == NULL) - return -EOPNOTSUPP; - - if (!(mode == LCK_PR || mode == LCK_PW)) - return -EINVAL; - - if ((offset & (~CFS_PAGE_MASK)) != 0 || - (nob & (~CFS_PAGE_MASK)) != 0) - return -EINVAL; - - rc = echo_get_object(&eco, ed, oa); - if (rc != 0) - return rc; - - end = (nob == 0) ? ((u64) -1) : (offset + nob - 1); - rc = cl_echo_enqueue(eco, offset, end, mode, &ulh->cookie); - if (rc == 0) { - oa->o_valid |= OBD_MD_FLHANDLE; - CDEBUG(D_INFO, "Cookie is %#llx\n", ulh->cookie); - } - echo_put_object(eco); - return rc; -} - -static int -echo_client_cancel(struct obd_export *exp, struct obdo *oa) -{ - struct echo_device *ed = obd2echo_dev(exp->exp_obd); - __u64 cookie = oa->o_handle.cookie; - - if ((oa->o_valid & OBD_MD_FLHANDLE) == 0) - return -EINVAL; - - CDEBUG(D_INFO, "Cookie is %#llx\n", cookie); - return cl_echo_cancel(ed, cookie); -} - -static int echo_client_iocontrol(unsigned int cmd, struct obd_export *exp, int len, - void *karg, void *uarg) + void *karg, void __user *uarg) { struct obd_device *obd = exp->exp_obd; struct echo_device *ed = obd2echo_dev(obd); @@ -1899,8 +1665,7 @@ echo_client_iocontrol(unsigned int cmd, struct obd_export *exp, int len, goto out; } - rc = echo_create_object(env, ed, 1, oa, data->ioc_pbuf1, - data->ioc_plen1, &dummy_oti); + rc = echo_create_object(env, ed, oa, &dummy_oti); goto out; case OBD_IOC_DESTROY: @@ -1911,7 +1676,7 @@ echo_client_iocontrol(unsigned int cmd, struct obd_export *exp, int len, rc = echo_get_object(&eco, ed, oa); if (rc == 0) { - rc = obd_destroy(env, ec->ec_exp, oa, eco->eo_lsm, + rc = obd_destroy(env, ec->ec_exp, oa, NULL, &dummy_oti, NULL); if (rc == 0) eco->eo_deleted = 1; @@ -1922,10 +1687,10 @@ echo_client_iocontrol(unsigned int cmd, struct obd_export *exp, int len, case OBD_IOC_GETATTR: rc = echo_get_object(&eco, ed, oa); if (rc == 0) { - struct obd_info oinfo = { }; + struct obd_info oinfo = { + .oi_oa = oa, + }; - oinfo.oi_md = eco->eo_lsm; - oinfo.oi_oa = oa; rc = obd_getattr(env, ec->ec_exp, &oinfo); echo_put_object(eco); } @@ -1939,10 +1704,9 @@ echo_client_iocontrol(unsigned int cmd, struct obd_export *exp, int len, rc = echo_get_object(&eco, ed, oa); if (rc == 0) { - struct obd_info oinfo = { }; - - oinfo.oi_oa = oa; - oinfo.oi_md = eco->eo_lsm; + struct obd_info oinfo = { + .oi_oa = oa, + }; rc = obd_setattr(env, ec->ec_exp, &oinfo, NULL); echo_put_object(eco); @@ -1961,50 +1725,6 @@ echo_client_iocontrol(unsigned int cmd, struct obd_export *exp, int len, rc = echo_client_brw_ioctl(env, rw, exp, data, &dummy_oti); goto out; - case ECHO_IOC_GET_STRIPE: - rc = echo_get_object(&eco, ed, oa); - if (rc == 0) { - rc = echo_copyout_lsm(eco->eo_lsm, data->ioc_pbuf1, - data->ioc_plen1); - echo_put_object(eco); - } - goto out; - - case ECHO_IOC_SET_STRIPE: - if (!capable(CFS_CAP_SYS_ADMIN)) { - rc = -EPERM; - goto out; - } - - if (data->ioc_pbuf1 == NULL) { /* unset */ - rc = echo_get_object(&eco, ed, oa); - if (rc == 0) { - eco->eo_deleted = 1; - echo_put_object(eco); - } - } else { - rc = echo_create_object(env, ed, 0, oa, - data->ioc_pbuf1, - data->ioc_plen1, &dummy_oti); - } - goto out; - - case ECHO_IOC_ENQUEUE: - if (!capable(CFS_CAP_SYS_ADMIN)) { - rc = -EPERM; - goto out; - } - - rc = echo_client_enqueue(exp, oa, - data->ioc_conn1, /* lock mode */ - data->ioc_offset, - data->ioc_count);/*extent*/ - goto out; - - case ECHO_IOC_CANCEL: - rc = echo_client_cancel(exp, oa); - goto out; - default: CERROR("echo_ioctl(): unrecognised ioctl %#x\n", cmd); rc = -ENOTTY; @@ -2051,7 +1771,6 @@ static int echo_client_setup(const struct lu_env *env, INIT_LIST_HEAD(&ec->ec_objects); INIT_LIST_HEAD(&ec->ec_locks); ec->ec_unique = 0; - ec->ec_nstripes = 0; ocd = kzalloc(sizeof(*ocd), GFP_NOFS); if (!ocd) { diff --git a/drivers/staging/lustre/lustre/osc/lproc_osc.c b/drivers/staging/lustre/lustre/osc/lproc_osc.c index 1091536..b69ec0f 100644 --- a/drivers/staging/lustre/lustre/osc/lproc_osc.c +++ b/drivers/staging/lustre/lustre/osc/lproc_osc.c @@ -480,9 +480,19 @@ static ssize_t contention_seconds_store(struct kobject *kobj, struct obd_device *obd = container_of(kobj, struct obd_device, obd_kobj); struct osc_device *od = obd2osc_dev(obd); + int rc; + int val; + + rc = kstrtoint(buffer, 10, &val); + if (rc) + return rc; + + if (val < 0) + return -EINVAL; + + od->od_contention_time = val; - return lprocfs_write_helper(buffer, count, &od->od_contention_time) ?: - count; + return count; } LUSTRE_RW_ATTR(contention_seconds); @@ -505,9 +515,16 @@ static ssize_t lockless_truncate_store(struct kobject *kobj, struct obd_device *obd = container_of(kobj, struct obd_device, obd_kobj); struct osc_device *od = obd2osc_dev(obd); + int rc; + unsigned int val; - return lprocfs_write_helper(buffer, count, &od->od_lockless_truncate) ?: - count; + rc = kstrtouint(buffer, 10, &val); + if (rc) + return rc; + + od->od_lockless_truncate = val; + + return count; } LUSTRE_RW_ATTR(lockless_truncate); diff --git a/drivers/staging/lustre/lustre/osc/osc_cache.c b/drivers/staging/lustre/lustre/osc/osc_cache.c index 2229419..6b5f8d0 100644 --- a/drivers/staging/lustre/lustre/osc/osc_cache.c +++ b/drivers/staging/lustre/lustre/osc/osc_cache.c @@ -1938,6 +1938,7 @@ static int get_write_extents(struct osc_object *obj, struct list_head *rpclist) static int osc_send_write_rpc(const struct lu_env *env, struct client_obd *cli, struct osc_object *osc) + __must_hold(osc) { LIST_HEAD(rpclist); struct osc_extent *ext; @@ -2010,6 +2011,7 @@ osc_send_write_rpc(const struct lu_env *env, struct client_obd *cli, static int osc_send_read_rpc(const struct lu_env *env, struct client_obd *cli, struct osc_object *osc) + __must_hold(osc) { struct osc_extent *ext; struct osc_extent *next; @@ -2083,6 +2085,7 @@ static struct osc_object *osc_next_obj(struct client_obd *cli) /* called with the loi list lock held */ static void osc_check_rpcs(const struct lu_env *env, struct client_obd *cli) + __must_hold(&cli->cl_loi_list_lock) { struct osc_object *osc; int rc = 0; diff --git a/drivers/staging/lustre/lustre/osc/osc_request.c b/drivers/staging/lustre/lustre/osc/osc_request.c index 7034f0a..3ae00fc 100644 --- a/drivers/staging/lustre/lustre/osc/osc_request.c +++ b/drivers/staging/lustre/lustre/osc/osc_request.c @@ -2534,7 +2534,8 @@ static int osc_statfs(const struct lu_env *env, struct obd_export *exp, * the maximum number of OST indices which will fit in the user buffer. * lmm_magic must be LOV_MAGIC (we only use 1 slot here). */ -static int osc_getstripe(struct lov_stripe_md *lsm, struct lov_user_md *lump) +static int osc_getstripe(struct lov_stripe_md *lsm, + struct lov_user_md __user *lump) { /* we use lov_user_md_v3 because it is larger than lov_user_md_v1 */ struct lov_user_md_v3 lum, *lumk; @@ -2591,7 +2592,7 @@ static int osc_getstripe(struct lov_stripe_md *lsm, struct lov_user_md *lump) } static int osc_iocontrol(unsigned int cmd, struct obd_export *exp, int len, - void *karg, void *uarg) + void *karg, void __user *uarg) { struct obd_device *obd = exp->exp_obd; struct obd_ioctl_data *data = karg; diff --git a/drivers/staging/lustre/lustre/ptlrpc/client.c b/drivers/staging/lustre/lustre/ptlrpc/client.c index efdda09..1cc3c69 100644 --- a/drivers/staging/lustre/lustre/ptlrpc/client.c +++ b/drivers/staging/lustre/lustre/ptlrpc/client.c @@ -353,6 +353,7 @@ static int unpack_reply(struct ptlrpc_request *req) * If anything goes wrong just ignore it - same as if it never happened */ static int ptlrpc_at_recv_early_reply(struct ptlrpc_request *req) + __must_hold(&req->rq_lock) { struct ptlrpc_request *early_req; time64_t olddl; @@ -1883,7 +1884,7 @@ int ptlrpc_expire_one_request(struct ptlrpc_request *req, int async_unlink) (s64)req->rq_sent, (s64)req->rq_real_sent); if (imp != NULL && obd_debug_peer_on_timeout) - LNetCtl(IOC_LIBCFS_DEBUG_PEER, &imp->imp_connection->c_peer); + LNetDebugPeer(imp->imp_connection->c_peer); ptlrpc_unregister_reply(req, async_unlink); ptlrpc_unregister_bulk(req, async_unlink); diff --git a/drivers/staging/lustre/lustre/ptlrpc/events.c b/drivers/staging/lustre/lustre/ptlrpc/events.c index 9901569..07e76a2 100644 --- a/drivers/staging/lustre/lustre/ptlrpc/events.c +++ b/drivers/staging/lustre/lustre/ptlrpc/events.c @@ -438,14 +438,11 @@ int ptlrpc_uuid_to_peer(struct obd_uuid *uuid, __u32 best_order = 0; int count = 0; int rc = -ENOENT; - int portals_compatibility; int dist; __u32 order; lnet_nid_t dst_nid; lnet_nid_t src_nid; - portals_compatibility = LNetCtl(IOC_LIBCFS_PORTALS_COMPATIBILITY, NULL); - peer->pid = LUSTRE_SRV_LNET_PID; /* Choose the matching UUID that's closest */ @@ -466,14 +463,6 @@ int ptlrpc_uuid_to_peer(struct obd_uuid *uuid, best_dist = dist; best_order = order; - if (portals_compatibility > 1) { - /* Strong portals compatibility: Zero the nid's - * NET, so if I'm reading new config logs, or - * getting configured by (new) lconf I can - * still talk to old servers. */ - dst_nid = LNET_MKNID(0, LNET_NIDADDR(dst_nid)); - src_nid = LNET_MKNID(0, LNET_NIDADDR(src_nid)); - } peer->nid = dst_nid; *self = src_nid; rc = 0; diff --git a/drivers/staging/lustre/lustre/ptlrpc/nrs.c b/drivers/staging/lustre/lustre/ptlrpc/nrs.c index 7044e1f..57acf8c 100644 --- a/drivers/staging/lustre/lustre/ptlrpc/nrs.c +++ b/drivers/staging/lustre/lustre/ptlrpc/nrs.c @@ -482,7 +482,6 @@ static void nrs_resource_get_safe(struct ptlrpc_nrs *nrs, static void nrs_resource_put_safe(struct ptlrpc_nrs_resource **resp) { struct ptlrpc_nrs_policy *pols[NRS_RES_MAX]; - struct ptlrpc_nrs *nrs = NULL; int i; for (i = 0; i < NRS_RES_MAX; i++) { @@ -496,18 +495,9 @@ static void nrs_resource_put_safe(struct ptlrpc_nrs_resource **resp) } for (i = 0; i < NRS_RES_MAX; i++) { - if (pols[i] == NULL) - continue; - - if (nrs == NULL) { - nrs = pols[i]->pol_nrs; - spin_lock(&nrs->nrs_lock); - } - nrs_policy_put_locked(pols[i]); + if (pols[i]) + nrs_policy_put(pols[i]); } - - if (nrs != NULL) - spin_unlock(&nrs->nrs_lock); } /** diff --git a/drivers/staging/lustre/lustre/ptlrpc/sec_bulk.c b/drivers/staging/lustre/lustre/ptlrpc/sec_bulk.c index 6152c1b..22621c7 100644 --- a/drivers/staging/lustre/lustre/ptlrpc/sec_bulk.c +++ b/drivers/staging/lustre/lustre/ptlrpc/sec_bulk.c @@ -304,7 +304,6 @@ static unsigned long enc_pools_cleanup(struct page ***pools, int npools) static inline void enc_pools_wakeup(void) { assert_spin_locked(&page_pools.epp_lock); - LASSERT(page_pools.epp_waitqlen >= 0); if (unlikely(page_pools.epp_waitqlen)) { LASSERT(waitqueue_active(&page_pools.epp_waitq)); diff --git a/drivers/staging/olpc_dcon/Kconfig b/drivers/staging/olpc_dcon/Kconfig deleted file mode 100644 index d277f04..0000000 --- a/drivers/staging/olpc_dcon/Kconfig +++ /dev/null @@ -1,35 +0,0 @@ -config FB_OLPC_DCON - tristate "One Laptop Per Child Display CONtroller support" - depends on OLPC && FB - depends on I2C - depends on (GPIO_CS5535 || GPIO_CS5535=n) - select BACKLIGHT_CLASS_DEVICE - ---help--- - In order to support very low power operation, the XO laptop uses a - secondary Display CONtroller, or DCON. This secondary controller - is present in the video pipeline between the primary display - controller (integrate into the processor or chipset) and the LCD - panel. It allows the main processor/display controller to be - completely powered off while still retaining an image on the display. - This controller is only available on OLPC platforms. Unless you have - one of these platforms, you will want to say 'N'. - -config FB_OLPC_DCON_1 - bool "OLPC XO-1 DCON support" - depends on FB_OLPC_DCON && GPIO_CS5535 - default y - ---help--- - Enable support for the DCON in XO-1 model laptops. The kernel - communicates with the DCON using model-specific code. If you - have an XO-1 (or if you're unsure what model you have), you should - say 'Y'. - -config FB_OLPC_DCON_1_5 - bool "OLPC XO-1.5 DCON support" - depends on FB_OLPC_DCON && ACPI - default y - ---help--- - Enable support for the DCON in XO-1.5 model laptops. The kernel - communicates with the DCON using model-specific code. If you - have an XO-1.5 (or if you're unsure what model you have), you - should say 'Y'. diff --git a/drivers/staging/olpc_dcon/Makefile b/drivers/staging/olpc_dcon/Makefile deleted file mode 100644 index 36c7e67..0000000 --- a/drivers/staging/olpc_dcon/Makefile +++ /dev/null @@ -1,6 +0,0 @@ -olpc-dcon-objs += olpc_dcon.o -olpc-dcon-$(CONFIG_FB_OLPC_DCON_1) += olpc_dcon_xo_1.o -olpc-dcon-$(CONFIG_FB_OLPC_DCON_1_5) += olpc_dcon_xo_1_5.o -obj-$(CONFIG_FB_OLPC_DCON) += olpc-dcon.o - - diff --git a/drivers/staging/olpc_dcon/TODO b/drivers/staging/olpc_dcon/TODO deleted file mode 100644 index 61c2e65..0000000 --- a/drivers/staging/olpc_dcon/TODO +++ /dev/null @@ -1,9 +0,0 @@ -TODO: - - see if vx855 gpio API can be made similar enough to cs5535 so we can - share more code - - allow simultaneous XO-1 and XO-1.5 support - -Please send patches to Greg Kroah-Hartman <greg@kroah.com> and -copy: - Daniel Drake <dsd@laptop.org> - Jens Frederich <jfrederich@gmail.com> diff --git a/drivers/staging/olpc_dcon/olpc_dcon.c b/drivers/staging/olpc_dcon/olpc_dcon.c deleted file mode 100644 index f45b2ef..0000000 --- a/drivers/staging/olpc_dcon/olpc_dcon.c +++ /dev/null @@ -1,813 +0,0 @@ -/* - * Mainly by David Woodhouse, somewhat modified by Jordan Crouse - * - * Copyright © 2006-2007 Red Hat, Inc. - * Copyright © 2006-2007 Advanced Micro Devices, Inc. - * Copyright © 2009 VIA Technology, Inc. - * Copyright (c) 2010-2011 Andres Salomon <dilinger@queued.net> - * - * This program is free software. You can redistribute it and/or - * modify it under the terms of version 2 of the GNU General Public - * License as published by the Free Software Foundation. - */ - -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#include <linux/kernel.h> -#include <linux/fb.h> -#include <linux/console.h> -#include <linux/i2c.h> -#include <linux/platform_device.h> -#include <linux/interrupt.h> -#include <linux/delay.h> -#include <linux/module.h> -#include <linux/backlight.h> -#include <linux/device.h> -#include <linux/uaccess.h> -#include <linux/ctype.h> -#include <linux/reboot.h> -#include <linux/olpc-ec.h> -#include <asm/tsc.h> -#include <asm/olpc.h> - -#include "olpc_dcon.h" - -/* Module definitions */ - -static ushort resumeline = 898; -module_param(resumeline, ushort, 0444); - -static struct dcon_platform_data *pdata; - -/* I2C structures */ - -/* Platform devices */ -static struct platform_device *dcon_device; - -static unsigned short normal_i2c[] = { 0x0d, I2C_CLIENT_END }; - -static s32 dcon_write(struct dcon_priv *dcon, u8 reg, u16 val) -{ - return i2c_smbus_write_word_data(dcon->client, reg, val); -} - -static s32 dcon_read(struct dcon_priv *dcon, u8 reg) -{ - return i2c_smbus_read_word_data(dcon->client, reg); -} - -/* ===== API functions - these are called by a variety of users ==== */ - -static int dcon_hw_init(struct dcon_priv *dcon, int is_init) -{ - u16 ver; - int rc = 0; - - ver = dcon_read(dcon, DCON_REG_ID); - if ((ver >> 8) != 0xDC) { - pr_err("DCON ID not 0xDCxx: 0x%04x instead.\n", ver); - rc = -ENXIO; - goto err; - } - - if (is_init) { - pr_info("Discovered DCON version %x\n", ver & 0xFF); - rc = pdata->init(dcon); - if (rc != 0) { - pr_err("Unable to init.\n"); - goto err; - } - } - - if (ver < 0xdc02) { - dev_err(&dcon->client->dev, - "DCON v1 is unsupported, giving up..\n"); - rc = -ENODEV; - goto err; - } - - /* SDRAM setup/hold time */ - dcon_write(dcon, 0x3a, 0xc040); - dcon_write(dcon, DCON_REG_MEM_OPT_A, 0x0000); /* clear option bits */ - dcon_write(dcon, DCON_REG_MEM_OPT_A, - MEM_DLL_CLOCK_DELAY | MEM_POWER_DOWN); - dcon_write(dcon, DCON_REG_MEM_OPT_B, MEM_SOFT_RESET); - - /* Colour swizzle, AA, no passthrough, backlight */ - if (is_init) { - dcon->disp_mode = MODE_PASSTHRU | MODE_BL_ENABLE | - MODE_CSWIZZLE | MODE_COL_AA; - } - dcon_write(dcon, DCON_REG_MODE, dcon->disp_mode); - - /* Set the scanline to interrupt on during resume */ - dcon_write(dcon, DCON_REG_SCAN_INT, resumeline); - -err: - return rc; -} - -/* - * The smbus doesn't always come back due to what is believed to be - * hardware (power rail) bugs. For older models where this is known to - * occur, our solution is to attempt to wait for the bus to stabilize; - * if it doesn't happen, cut power to the dcon, repower it, and wait - * for the bus to stabilize. Rinse, repeat until we have a working - * smbus. For newer models, we simply BUG(); we want to know if this - * still happens despite the power fixes that have been made! - */ -static int dcon_bus_stabilize(struct dcon_priv *dcon, int is_powered_down) -{ - unsigned long timeout; - u8 pm; - int x; - -power_up: - if (is_powered_down) { - pm = 1; - x = olpc_ec_cmd(EC_DCON_POWER_MODE, &pm, 1, NULL, 0); - if (x) { - pr_warn("unable to force dcon to power up: %d!\n", x); - return x; - } - usleep_range(10000, 11000); /* we'll be conservative */ - } - - pdata->bus_stabilize_wiggle(); - - for (x = -1, timeout = 50; timeout && x < 0; timeout--) { - usleep_range(1000, 1100); - x = dcon_read(dcon, DCON_REG_ID); - } - if (x < 0) { - pr_err("unable to stabilize dcon's smbus, reasserting power and praying.\n"); - BUG_ON(olpc_board_at_least(olpc_board(0xc2))); - pm = 0; - olpc_ec_cmd(EC_DCON_POWER_MODE, &pm, 1, NULL, 0); - msleep(100); - is_powered_down = 1; - goto power_up; /* argh, stupid hardware.. */ - } - - if (is_powered_down) - return dcon_hw_init(dcon, 0); - return 0; -} - -static void dcon_set_backlight(struct dcon_priv *dcon, u8 level) -{ - dcon->bl_val = level; - dcon_write(dcon, DCON_REG_BRIGHT, dcon->bl_val); - - /* Purposely turn off the backlight when we go to level 0 */ - if (dcon->bl_val == 0) { - dcon->disp_mode &= ~MODE_BL_ENABLE; - dcon_write(dcon, DCON_REG_MODE, dcon->disp_mode); - } else if (!(dcon->disp_mode & MODE_BL_ENABLE)) { - dcon->disp_mode |= MODE_BL_ENABLE; - dcon_write(dcon, DCON_REG_MODE, dcon->disp_mode); - } -} - -/* Set the output type to either color or mono */ -static int dcon_set_mono_mode(struct dcon_priv *dcon, bool enable_mono) -{ - if (dcon->mono == enable_mono) - return 0; - - dcon->mono = enable_mono; - - if (enable_mono) { - dcon->disp_mode &= ~(MODE_CSWIZZLE | MODE_COL_AA); - dcon->disp_mode |= MODE_MONO_LUMA; - } else { - dcon->disp_mode &= ~(MODE_MONO_LUMA); - dcon->disp_mode |= MODE_CSWIZZLE | MODE_COL_AA; - } - - dcon_write(dcon, DCON_REG_MODE, dcon->disp_mode); - return 0; -} - -/* For now, this will be really stupid - we need to address how - * DCONLOAD works in a sleep and account for it accordingly - */ - -static void dcon_sleep(struct dcon_priv *dcon, bool sleep) -{ - int x; - - /* Turn off the backlight and put the DCON to sleep */ - - if (dcon->asleep == sleep) - return; - - if (!olpc_board_at_least(olpc_board(0xc2))) - return; - - if (sleep) { - u8 pm = 0; - - x = olpc_ec_cmd(EC_DCON_POWER_MODE, &pm, 1, NULL, 0); - if (x) - pr_warn("unable to force dcon to power down: %d!\n", x); - else - dcon->asleep = sleep; - } else { - /* Only re-enable the backlight if the backlight value is set */ - if (dcon->bl_val != 0) - dcon->disp_mode |= MODE_BL_ENABLE; - x = dcon_bus_stabilize(dcon, 1); - if (x) - pr_warn("unable to reinit dcon hardware: %d!\n", x); - else - dcon->asleep = sleep; - - /* Restore backlight */ - dcon_set_backlight(dcon, dcon->bl_val); - } - - /* We should turn off some stuff in the framebuffer - but what? */ -} - -/* the DCON seems to get confused if we change DCONLOAD too - * frequently -- i.e., approximately faster than frame time. - * normally we don't change it this fast, so in general we won't - * delay here. - */ -static void dcon_load_holdoff(struct dcon_priv *dcon) -{ - ktime_t delta_t, now; - - while (1) { - now = ktime_get(); - delta_t = ktime_sub(now, dcon->load_time); - if (ktime_to_ns(delta_t) > NSEC_PER_MSEC * 20) - break; - mdelay(4); - } -} - -static bool dcon_blank_fb(struct dcon_priv *dcon, bool blank) -{ - int err; - - console_lock(); - if (!lock_fb_info(dcon->fbinfo)) { - console_unlock(); - dev_err(&dcon->client->dev, "unable to lock framebuffer\n"); - return false; - } - - dcon->ignore_fb_events = true; - err = fb_blank(dcon->fbinfo, - blank ? FB_BLANK_POWERDOWN : FB_BLANK_UNBLANK); - dcon->ignore_fb_events = false; - unlock_fb_info(dcon->fbinfo); - console_unlock(); - - if (err) { - dev_err(&dcon->client->dev, "couldn't %sblank framebuffer\n", - blank ? "" : "un"); - return false; - } - return true; -} - -/* Set the source of the display (CPU or DCON) */ -static void dcon_source_switch(struct work_struct *work) -{ - struct dcon_priv *dcon = container_of(work, struct dcon_priv, - switch_source); - int source = dcon->pending_src; - - if (dcon->curr_src == source) - return; - - dcon_load_holdoff(dcon); - - dcon->switched = false; - - switch (source) { - case DCON_SOURCE_CPU: - pr_info("dcon_source_switch to CPU\n"); - /* Enable the scanline interrupt bit */ - if (dcon_write(dcon, DCON_REG_MODE, - dcon->disp_mode | MODE_SCAN_INT)) - pr_err("couldn't enable scanline interrupt!\n"); - else - /* Wait up to one second for the scanline interrupt */ - wait_event_timeout(dcon->waitq, dcon->switched, HZ); - - if (!dcon->switched) - pr_err("Timeout entering CPU mode; expect a screen glitch.\n"); - - /* Turn off the scanline interrupt */ - if (dcon_write(dcon, DCON_REG_MODE, dcon->disp_mode)) - pr_err("couldn't disable scanline interrupt!\n"); - - /* - * Ideally we'd like to disable interrupts here so that the - * fb unblanking and DCON turn on happen at a known time value; - * however, we can't do that right now with fb_blank - * messing with semaphores. - * - * For now, we just hope.. - */ - if (!dcon_blank_fb(dcon, false)) { - pr_err("Failed to enter CPU mode\n"); - dcon->pending_src = DCON_SOURCE_DCON; - return; - } - - /* And turn off the DCON */ - pdata->set_dconload(1); - dcon->load_time = ktime_get(); - - pr_info("The CPU has control\n"); - break; - case DCON_SOURCE_DCON: - { - ktime_t delta_t; - - pr_info("dcon_source_switch to DCON\n"); - - /* Clear DCONLOAD - this implies that the DCON is in control */ - pdata->set_dconload(0); - dcon->load_time = ktime_get(); - - wait_event_timeout(dcon->waitq, dcon->switched, HZ/2); - - if (!dcon->switched) { - pr_err("Timeout entering DCON mode; expect a screen glitch.\n"); - } else { - /* sometimes the DCON doesn't follow its own rules, - * and doesn't wait for two vsync pulses before - * ack'ing the frame load with an IRQ. the result - * is that the display shows the *previously* - * loaded frame. we can detect this by looking at - * the time between asserting DCONLOAD and the IRQ -- - * if it's less than 20msec, then the DCON couldn't - * have seen two VSYNC pulses. in that case we - * deassert and reassert, and hope for the best. - * see http://dev.laptop.org/ticket/9664 - */ - delta_t = ktime_sub(dcon->irq_time, dcon->load_time); - if (dcon->switched && ktime_to_ns(delta_t) - < NSEC_PER_MSEC * 20) { - pr_err("missed loading, retrying\n"); - pdata->set_dconload(1); - mdelay(41); - pdata->set_dconload(0); - dcon->load_time = ktime_get(); - mdelay(41); - } - } - - dcon_blank_fb(dcon, true); - pr_info("The DCON has control\n"); - break; - } - default: - BUG(); - } - - dcon->curr_src = source; -} - -static void dcon_set_source(struct dcon_priv *dcon, int arg) -{ - if (dcon->pending_src == arg) - return; - - dcon->pending_src = arg; - - if (dcon->curr_src != arg) - schedule_work(&dcon->switch_source); -} - -static void dcon_set_source_sync(struct dcon_priv *dcon, int arg) -{ - dcon_set_source(dcon, arg); - flush_scheduled_work(); -} - -static ssize_t dcon_mode_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct dcon_priv *dcon = dev_get_drvdata(dev); - - return sprintf(buf, "%4.4X\n", dcon->disp_mode); -} - -static ssize_t dcon_sleep_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct dcon_priv *dcon = dev_get_drvdata(dev); - - return sprintf(buf, "%d\n", dcon->asleep); -} - -static ssize_t dcon_freeze_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct dcon_priv *dcon = dev_get_drvdata(dev); - - return sprintf(buf, "%d\n", dcon->curr_src == DCON_SOURCE_DCON ? 1 : 0); -} - -static ssize_t dcon_mono_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - struct dcon_priv *dcon = dev_get_drvdata(dev); - - return sprintf(buf, "%d\n", dcon->mono); -} - -static ssize_t dcon_resumeline_show(struct device *dev, - struct device_attribute *attr, char *buf) -{ - return sprintf(buf, "%d\n", resumeline); -} - -static ssize_t dcon_mono_store(struct device *dev, - struct device_attribute *attr, const char *buf, size_t count) -{ - unsigned long enable_mono; - int rc; - - rc = kstrtoul(buf, 10, &enable_mono); - if (rc) - return rc; - - dcon_set_mono_mode(dev_get_drvdata(dev), enable_mono ? true : false); - - return count; -} - -static ssize_t dcon_freeze_store(struct device *dev, - struct device_attribute *attr, const char *buf, size_t count) -{ - struct dcon_priv *dcon = dev_get_drvdata(dev); - unsigned long output; - int ret; - - ret = kstrtoul(buf, 10, &output); - if (ret) - return ret; - - pr_info("dcon_freeze_store: %lu\n", output); - - switch (output) { - case 0: - dcon_set_source(dcon, DCON_SOURCE_CPU); - break; - case 1: - dcon_set_source_sync(dcon, DCON_SOURCE_DCON); - break; - case 2: /* normally unused */ - dcon_set_source(dcon, DCON_SOURCE_DCON); - break; - default: - return -EINVAL; - } - - return count; -} - -static ssize_t dcon_resumeline_store(struct device *dev, - struct device_attribute *attr, const char *buf, size_t count) -{ - unsigned short rl; - int rc; - - rc = kstrtou16(buf, 10, &rl); - if (rc) - return rc; - - resumeline = rl; - dcon_write(dev_get_drvdata(dev), DCON_REG_SCAN_INT, resumeline); - - return count; -} - -static ssize_t dcon_sleep_store(struct device *dev, - struct device_attribute *attr, const char *buf, size_t count) -{ - unsigned long output; - int ret; - - ret = kstrtoul(buf, 10, &output); - if (ret) - return ret; - - dcon_sleep(dev_get_drvdata(dev), output ? true : false); - return count; -} - -static struct device_attribute dcon_device_files[] = { - __ATTR(mode, 0444, dcon_mode_show, NULL), - __ATTR(sleep, 0644, dcon_sleep_show, dcon_sleep_store), - __ATTR(freeze, 0644, dcon_freeze_show, dcon_freeze_store), - __ATTR(monochrome, 0644, dcon_mono_show, dcon_mono_store), - __ATTR(resumeline, 0644, dcon_resumeline_show, dcon_resumeline_store), -}; - -static int dcon_bl_update(struct backlight_device *dev) -{ - struct dcon_priv *dcon = bl_get_data(dev); - u8 level = dev->props.brightness & 0x0F; - - if (dev->props.power != FB_BLANK_UNBLANK) - level = 0; - - if (level != dcon->bl_val) - dcon_set_backlight(dcon, level); - - /* power down the DCON when the screen is blanked */ - if (!dcon->ignore_fb_events) - dcon_sleep(dcon, !!(dev->props.state & BL_CORE_FBBLANK)); - - return 0; -} - -static int dcon_bl_get(struct backlight_device *dev) -{ - struct dcon_priv *dcon = bl_get_data(dev); - - return dcon->bl_val; -} - -static const struct backlight_ops dcon_bl_ops = { - .update_status = dcon_bl_update, - .get_brightness = dcon_bl_get, -}; - -static struct backlight_properties dcon_bl_props = { - .max_brightness = 15, - .type = BACKLIGHT_RAW, - .power = FB_BLANK_UNBLANK, -}; - -static int dcon_reboot_notify(struct notifier_block *nb, - unsigned long foo, void *bar) -{ - struct dcon_priv *dcon = container_of(nb, struct dcon_priv, reboot_nb); - - if (!dcon || !dcon->client) - return NOTIFY_DONE; - - /* Turn off the DCON. Entirely. */ - dcon_write(dcon, DCON_REG_MODE, 0x39); - dcon_write(dcon, DCON_REG_MODE, 0x32); - return NOTIFY_DONE; -} - -static int unfreeze_on_panic(struct notifier_block *nb, - unsigned long e, void *p) -{ - pdata->set_dconload(1); - return NOTIFY_DONE; -} - -static struct notifier_block dcon_panic_nb = { - .notifier_call = unfreeze_on_panic, -}; - -static int dcon_detect(struct i2c_client *client, struct i2c_board_info *info) -{ - strlcpy(info->type, "olpc_dcon", I2C_NAME_SIZE); - - return 0; -} - -static int dcon_probe(struct i2c_client *client, const struct i2c_device_id *id) -{ - struct dcon_priv *dcon; - int rc, i, j; - - if (!pdata) - return -ENXIO; - - dcon = kzalloc(sizeof(*dcon), GFP_KERNEL); - if (!dcon) - return -ENOMEM; - - dcon->client = client; - init_waitqueue_head(&dcon->waitq); - INIT_WORK(&dcon->switch_source, dcon_source_switch); - dcon->reboot_nb.notifier_call = dcon_reboot_notify; - dcon->reboot_nb.priority = -1; - - i2c_set_clientdata(client, dcon); - - if (num_registered_fb < 1) { - dev_err(&client->dev, "DCON driver requires a registered fb\n"); - rc = -EIO; - goto einit; - } - dcon->fbinfo = registered_fb[0]; - - rc = dcon_hw_init(dcon, 1); - if (rc) - goto einit; - - /* Add the DCON device */ - - dcon_device = platform_device_alloc("dcon", -1); - - if (!dcon_device) { - pr_err("Unable to create the DCON device\n"); - rc = -ENOMEM; - goto eirq; - } - rc = platform_device_add(dcon_device); - platform_set_drvdata(dcon_device, dcon); - - if (rc) { - pr_err("Unable to add the DCON device\n"); - goto edev; - } - - for (i = 0; i < ARRAY_SIZE(dcon_device_files); i++) { - rc = device_create_file(&dcon_device->dev, - &dcon_device_files[i]); - if (rc) { - dev_err(&dcon_device->dev, "Cannot create sysfs file\n"); - goto ecreate; - } - } - - dcon->bl_val = dcon_read(dcon, DCON_REG_BRIGHT) & 0x0F; - - /* Add the backlight device for the DCON */ - dcon_bl_props.brightness = dcon->bl_val; - dcon->bl_dev = backlight_device_register("dcon-bl", &dcon_device->dev, - dcon, &dcon_bl_ops, &dcon_bl_props); - if (IS_ERR(dcon->bl_dev)) { - dev_err(&client->dev, "cannot register backlight dev (%ld)\n", - PTR_ERR(dcon->bl_dev)); - dcon->bl_dev = NULL; - } - - register_reboot_notifier(&dcon->reboot_nb); - atomic_notifier_chain_register(&panic_notifier_list, &dcon_panic_nb); - - return 0; - - ecreate: - for (j = 0; j < i; j++) - device_remove_file(&dcon_device->dev, &dcon_device_files[j]); - edev: - platform_device_unregister(dcon_device); - dcon_device = NULL; - eirq: - free_irq(DCON_IRQ, dcon); - einit: - kfree(dcon); - return rc; -} - -static int dcon_remove(struct i2c_client *client) -{ - struct dcon_priv *dcon = i2c_get_clientdata(client); - - unregister_reboot_notifier(&dcon->reboot_nb); - atomic_notifier_chain_unregister(&panic_notifier_list, &dcon_panic_nb); - - free_irq(DCON_IRQ, dcon); - - backlight_device_unregister(dcon->bl_dev); - - if (dcon_device) - platform_device_unregister(dcon_device); - cancel_work_sync(&dcon->switch_source); - - kfree(dcon); - - return 0; -} - -#ifdef CONFIG_PM -static int dcon_suspend(struct device *dev) -{ - struct i2c_client *client = to_i2c_client(dev); - struct dcon_priv *dcon = i2c_get_clientdata(client); - - if (!dcon->asleep) { - /* Set up the DCON to have the source */ - dcon_set_source_sync(dcon, DCON_SOURCE_DCON); - } - - return 0; -} - -static int dcon_resume(struct device *dev) -{ - struct i2c_client *client = to_i2c_client(dev); - struct dcon_priv *dcon = i2c_get_clientdata(client); - - if (!dcon->asleep) { - dcon_bus_stabilize(dcon, 0); - dcon_set_source(dcon, DCON_SOURCE_CPU); - } - - return 0; -} - -#else - -#define dcon_suspend NULL -#define dcon_resume NULL - -#endif /* CONFIG_PM */ - -irqreturn_t dcon_interrupt(int irq, void *id) -{ - struct dcon_priv *dcon = id; - u8 status; - - if (pdata->read_status(&status)) - return IRQ_NONE; - - switch (status & 3) { - case 3: - pr_debug("DCONLOAD_MISSED interrupt\n"); - break; - - case 2: /* switch to DCON mode */ - case 1: /* switch to CPU mode */ - dcon->switched = true; - dcon->irq_time = ktime_get(); - wake_up(&dcon->waitq); - break; - - case 0: - /* workaround resume case: the DCON (on 1.5) doesn't - * ever assert status 0x01 when switching to CPU mode - * during resume. this is because DCONLOAD is de-asserted - * _immediately_ upon exiting S3, so the actual release - * of the DCON happened long before this point. - * see http://dev.laptop.org/ticket/9869 - */ - if (dcon->curr_src != dcon->pending_src && !dcon->switched) { - dcon->switched = true; - dcon->irq_time = ktime_get(); - wake_up(&dcon->waitq); - pr_debug("switching w/ status 0/0\n"); - } else { - pr_debug("scanline interrupt w/CPU\n"); - } - } - - return IRQ_HANDLED; -} - -static const struct dev_pm_ops dcon_pm_ops = { - .suspend = dcon_suspend, - .resume = dcon_resume, -}; - -static const struct i2c_device_id dcon_idtable[] = { - { "olpc_dcon", 0 }, - { } -}; -MODULE_DEVICE_TABLE(i2c, dcon_idtable); - -static struct i2c_driver dcon_driver = { - .driver = { - .name = "olpc_dcon", - .pm = &dcon_pm_ops, - }, - .class = I2C_CLASS_DDC | I2C_CLASS_HWMON, - .id_table = dcon_idtable, - .probe = dcon_probe, - .remove = dcon_remove, - .detect = dcon_detect, - .address_list = normal_i2c, -}; - -static int __init olpc_dcon_init(void) -{ -#ifdef CONFIG_FB_OLPC_DCON_1_5 - /* XO-1.5 */ - if (olpc_board_at_least(olpc_board(0xd0))) - pdata = &dcon_pdata_xo_1_5; -#endif -#ifdef CONFIG_FB_OLPC_DCON_1 - if (!pdata) - pdata = &dcon_pdata_xo_1; -#endif - - return i2c_add_driver(&dcon_driver); -} - -static void __exit olpc_dcon_exit(void) -{ - i2c_del_driver(&dcon_driver); -} - -module_init(olpc_dcon_init); -module_exit(olpc_dcon_exit); - -MODULE_LICENSE("GPL"); diff --git a/drivers/staging/olpc_dcon/olpc_dcon.h b/drivers/staging/olpc_dcon/olpc_dcon.h deleted file mode 100644 index 215e7ec..0000000 --- a/drivers/staging/olpc_dcon/olpc_dcon.h +++ /dev/null @@ -1,111 +0,0 @@ -#ifndef OLPC_DCON_H_ -#define OLPC_DCON_H_ - -#include <linux/notifier.h> -#include <linux/workqueue.h> - -/* DCON registers */ - -#define DCON_REG_ID 0 -#define DCON_REG_MODE 1 - -#define MODE_PASSTHRU (1<<0) -#define MODE_SLEEP (1<<1) -#define MODE_SLEEP_AUTO (1<<2) -#define MODE_BL_ENABLE (1<<3) -#define MODE_BLANK (1<<4) -#define MODE_CSWIZZLE (1<<5) -#define MODE_COL_AA (1<<6) -#define MODE_MONO_LUMA (1<<7) -#define MODE_SCAN_INT (1<<8) -#define MODE_CLOCKDIV (1<<9) -#define MODE_DEBUG (1<<14) -#define MODE_SELFTEST (1<<15) - -#define DCON_REG_HRES 0x2 -#define DCON_REG_HTOTAL 0x3 -#define DCON_REG_HSYNC_WIDTH 0x4 -#define DCON_REG_VRES 0x5 -#define DCON_REG_VTOTAL 0x6 -#define DCON_REG_VSYNC_WIDTH 0x7 -#define DCON_REG_TIMEOUT 0x8 -#define DCON_REG_SCAN_INT 0x9 -#define DCON_REG_BRIGHT 0xa -#define DCON_REG_MEM_OPT_A 0x41 -#define DCON_REG_MEM_OPT_B 0x42 - -/* Load Delay Locked Loop (DLL) settings for clock delay */ -#define MEM_DLL_CLOCK_DELAY (1<<0) -/* Memory controller power down function */ -#define MEM_POWER_DOWN (1<<8) -/* Memory controller software reset */ -#define MEM_SOFT_RESET (1<<0) - -/* Status values */ - -#define DCONSTAT_SCANINT 0 -#define DCONSTAT_SCANINT_DCON 1 -#define DCONSTAT_DISPLAYLOAD 2 -#define DCONSTAT_MISSED 3 - -/* Source values */ - -#define DCON_SOURCE_DCON 0 -#define DCON_SOURCE_CPU 1 - -/* Interrupt */ -#define DCON_IRQ 6 - -struct dcon_priv { - struct i2c_client *client; - struct fb_info *fbinfo; - struct backlight_device *bl_dev; - - wait_queue_head_t waitq; - struct work_struct switch_source; - struct notifier_block reboot_nb; - - /* Shadow register for the DCON_REG_MODE register */ - u8 disp_mode; - - /* The current backlight value - this saves us some smbus traffic */ - u8 bl_val; - - /* Current source, initialized at probe time */ - int curr_src; - - /* Desired source */ - int pending_src; - - /* Variables used during switches */ - bool switched; - ktime_t irq_time; - ktime_t load_time; - - /* Current output type; true == mono, false == color */ - bool mono; - bool asleep; - /* This get set while controlling fb blank state from the driver */ - bool ignore_fb_events; -}; - -struct dcon_platform_data { - int (*init)(struct dcon_priv *); - void (*bus_stabilize_wiggle)(void); - void (*set_dconload)(int); - int (*read_status)(u8 *); -}; - -#include <linux/interrupt.h> - -irqreturn_t dcon_interrupt(int irq, void *id); - -#ifdef CONFIG_FB_OLPC_DCON_1 -extern struct dcon_platform_data dcon_pdata_xo_1; -#endif - -#ifdef CONFIG_FB_OLPC_DCON_1_5 -extern struct dcon_platform_data dcon_pdata_xo_1_5; -#endif - -#endif diff --git a/drivers/staging/olpc_dcon/olpc_dcon_xo_1.c b/drivers/staging/olpc_dcon/olpc_dcon_xo_1.c deleted file mode 100644 index 0c5a10c..0000000 --- a/drivers/staging/olpc_dcon/olpc_dcon_xo_1.c +++ /dev/null @@ -1,205 +0,0 @@ -/* - * Mainly by David Woodhouse, somewhat modified by Jordan Crouse - * - * Copyright © 2006-2007 Red Hat, Inc. - * Copyright © 2006-2007 Advanced Micro Devices, Inc. - * Copyright © 2009 VIA Technology, Inc. - * Copyright (c) 2010 Andres Salomon <dilinger@queued.net> - * - * This program is free software. You can redistribute it and/or - * modify it under the terms of version 2 of the GNU General Public - * License as published by the Free Software Foundation. - */ - -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#include <linux/cs5535.h> -#include <linux/gpio.h> -#include <linux/delay.h> -#include <asm/olpc.h> - -#include "olpc_dcon.h" - -static int dcon_init_xo_1(struct dcon_priv *dcon) -{ - unsigned char lob; - - if (gpio_request(OLPC_GPIO_DCON_STAT0, "OLPC-DCON")) { - pr_err("failed to request STAT0 GPIO\n"); - return -EIO; - } - if (gpio_request(OLPC_GPIO_DCON_STAT1, "OLPC-DCON")) { - pr_err("failed to request STAT1 GPIO\n"); - goto err_gp_stat1; - } - if (gpio_request(OLPC_GPIO_DCON_IRQ, "OLPC-DCON")) { - pr_err("failed to request IRQ GPIO\n"); - goto err_gp_irq; - } - if (gpio_request(OLPC_GPIO_DCON_LOAD, "OLPC-DCON")) { - pr_err("failed to request LOAD GPIO\n"); - goto err_gp_load; - } - if (gpio_request(OLPC_GPIO_DCON_BLANK, "OLPC-DCON")) { - pr_err("failed to request BLANK GPIO\n"); - goto err_gp_blank; - } - - /* Turn off the event enable for GPIO7 just to be safe */ - cs5535_gpio_clear(OLPC_GPIO_DCON_IRQ, GPIO_EVENTS_ENABLE); - - /* - * Determine the current state by reading the GPIO bit; earlier - * stages of the boot process have established the state. - * - * Note that we read GPIO_OUTPUT_VAL rather than GPIO_READ_BACK here; - * this is because OFW will disable input for the pin and set a value.. - * READ_BACK will only contain a valid value if input is enabled and - * then a value is set. So, future readings of the pin can use - * READ_BACK, but the first one cannot. Awesome, huh? - */ - dcon->curr_src = cs5535_gpio_isset(OLPC_GPIO_DCON_LOAD, GPIO_OUTPUT_VAL) - ? DCON_SOURCE_CPU - : DCON_SOURCE_DCON; - dcon->pending_src = dcon->curr_src; - - /* Set the directions for the GPIO pins */ - gpio_direction_input(OLPC_GPIO_DCON_STAT0); - gpio_direction_input(OLPC_GPIO_DCON_STAT1); - gpio_direction_input(OLPC_GPIO_DCON_IRQ); - gpio_direction_input(OLPC_GPIO_DCON_BLANK); - gpio_direction_output(OLPC_GPIO_DCON_LOAD, - dcon->curr_src == DCON_SOURCE_CPU); - - /* Set up the interrupt mappings */ - - /* Set the IRQ to pair 2 */ - cs5535_gpio_setup_event(OLPC_GPIO_DCON_IRQ, 2, 0); - - /* Enable group 2 to trigger the DCON interrupt */ - cs5535_gpio_set_irq(2, DCON_IRQ); - - /* Select edge level for interrupt (in PIC) */ - lob = inb(0x4d0); - lob &= ~(1 << DCON_IRQ); - outb(lob, 0x4d0); - - /* Register the interrupt handler */ - if (request_irq(DCON_IRQ, &dcon_interrupt, 0, "DCON", dcon)) { - pr_err("failed to request DCON's irq\n"); - goto err_req_irq; - } - - /* Clear INV_EN for GPIO7 (DCONIRQ) */ - cs5535_gpio_clear(OLPC_GPIO_DCON_IRQ, GPIO_INPUT_INVERT); - - /* Enable filter for GPIO12 (DCONBLANK) */ - cs5535_gpio_set(OLPC_GPIO_DCON_BLANK, GPIO_INPUT_FILTER); - - /* Disable filter for GPIO7 */ - cs5535_gpio_clear(OLPC_GPIO_DCON_IRQ, GPIO_INPUT_FILTER); - - /* Disable event counter for GPIO7 (DCONIRQ) and GPIO12 (DCONBLANK) */ - cs5535_gpio_clear(OLPC_GPIO_DCON_IRQ, GPIO_INPUT_EVENT_COUNT); - cs5535_gpio_clear(OLPC_GPIO_DCON_BLANK, GPIO_INPUT_EVENT_COUNT); - - /* Add GPIO12 to the Filter Event Pair #7 */ - cs5535_gpio_set(OLPC_GPIO_DCON_BLANK, GPIO_FE7_SEL); - - /* Turn off negative Edge Enable for GPIO12 */ - cs5535_gpio_clear(OLPC_GPIO_DCON_BLANK, GPIO_NEGATIVE_EDGE_EN); - - /* Enable negative Edge Enable for GPIO7 */ - cs5535_gpio_set(OLPC_GPIO_DCON_IRQ, GPIO_NEGATIVE_EDGE_EN); - - /* Zero the filter amount for Filter Event Pair #7 */ - cs5535_gpio_set(0, GPIO_FLTR7_AMOUNT); - - /* Clear the negative edge status for GPIO7 and GPIO12 */ - cs5535_gpio_set(OLPC_GPIO_DCON_IRQ, GPIO_NEGATIVE_EDGE_STS); - cs5535_gpio_set(OLPC_GPIO_DCON_BLANK, GPIO_NEGATIVE_EDGE_STS); - - /* FIXME: Clear the positive status as well, just to be sure */ - cs5535_gpio_set(OLPC_GPIO_DCON_IRQ, GPIO_POSITIVE_EDGE_STS); - cs5535_gpio_set(OLPC_GPIO_DCON_BLANK, GPIO_POSITIVE_EDGE_STS); - - /* Enable events for GPIO7 (DCONIRQ) and GPIO12 (DCONBLANK) */ - cs5535_gpio_set(OLPC_GPIO_DCON_IRQ, GPIO_EVENTS_ENABLE); - cs5535_gpio_set(OLPC_GPIO_DCON_BLANK, GPIO_EVENTS_ENABLE); - - return 0; - -err_req_irq: - gpio_free(OLPC_GPIO_DCON_BLANK); -err_gp_blank: - gpio_free(OLPC_GPIO_DCON_LOAD); -err_gp_load: - gpio_free(OLPC_GPIO_DCON_IRQ); -err_gp_irq: - gpio_free(OLPC_GPIO_DCON_STAT1); -err_gp_stat1: - gpio_free(OLPC_GPIO_DCON_STAT0); - return -EIO; -} - -static void dcon_wiggle_xo_1(void) -{ - int x; - - /* - * According to HiMax, when powering the DCON up we should hold - * SMB_DATA high for 8 SMB_CLK cycles. This will force the DCON - * state machine to reset to a (sane) initial state. Mitch Bradley - * did some testing and discovered that holding for 16 SMB_CLK cycles - * worked a lot more reliably, so that's what we do here. - * - * According to the cs5536 spec, to set GPIO14 to SMB_CLK we must - * simultaneously set AUX1 IN/OUT to GPIO14; ditto for SMB_DATA and - * GPIO15. - */ - cs5535_gpio_set(OLPC_GPIO_SMB_CLK, GPIO_OUTPUT_VAL); - cs5535_gpio_set(OLPC_GPIO_SMB_DATA, GPIO_OUTPUT_VAL); - cs5535_gpio_set(OLPC_GPIO_SMB_CLK, GPIO_OUTPUT_ENABLE); - cs5535_gpio_set(OLPC_GPIO_SMB_DATA, GPIO_OUTPUT_ENABLE); - cs5535_gpio_clear(OLPC_GPIO_SMB_CLK, GPIO_OUTPUT_AUX1); - cs5535_gpio_clear(OLPC_GPIO_SMB_DATA, GPIO_OUTPUT_AUX1); - cs5535_gpio_clear(OLPC_GPIO_SMB_CLK, GPIO_OUTPUT_AUX2); - cs5535_gpio_clear(OLPC_GPIO_SMB_DATA, GPIO_OUTPUT_AUX2); - cs5535_gpio_clear(OLPC_GPIO_SMB_CLK, GPIO_INPUT_AUX1); - cs5535_gpio_clear(OLPC_GPIO_SMB_DATA, GPIO_INPUT_AUX1); - - for (x = 0; x < 16; x++) { - udelay(5); - cs5535_gpio_clear(OLPC_GPIO_SMB_CLK, GPIO_OUTPUT_VAL); - udelay(5); - cs5535_gpio_set(OLPC_GPIO_SMB_CLK, GPIO_OUTPUT_VAL); - } - udelay(5); - cs5535_gpio_set(OLPC_GPIO_SMB_CLK, GPIO_OUTPUT_AUX1); - cs5535_gpio_set(OLPC_GPIO_SMB_DATA, GPIO_OUTPUT_AUX1); - cs5535_gpio_set(OLPC_GPIO_SMB_CLK, GPIO_INPUT_AUX1); - cs5535_gpio_set(OLPC_GPIO_SMB_DATA, GPIO_INPUT_AUX1); -} - -static void dcon_set_dconload_1(int val) -{ - gpio_set_value(OLPC_GPIO_DCON_LOAD, val); -} - -static int dcon_read_status_xo_1(u8 *status) -{ - *status = gpio_get_value(OLPC_GPIO_DCON_STAT0); - *status |= gpio_get_value(OLPC_GPIO_DCON_STAT1) << 1; - - /* Clear the negative edge status for GPIO7 */ - cs5535_gpio_set(OLPC_GPIO_DCON_IRQ, GPIO_NEGATIVE_EDGE_STS); - - return 0; -} - -struct dcon_platform_data dcon_pdata_xo_1 = { - .init = dcon_init_xo_1, - .bus_stabilize_wiggle = dcon_wiggle_xo_1, - .set_dconload = dcon_set_dconload_1, - .read_status = dcon_read_status_xo_1, -}; diff --git a/drivers/staging/olpc_dcon/olpc_dcon_xo_1_5.c b/drivers/staging/olpc_dcon/olpc_dcon_xo_1_5.c deleted file mode 100644 index 6a4d379..0000000 --- a/drivers/staging/olpc_dcon/olpc_dcon_xo_1_5.c +++ /dev/null @@ -1,161 +0,0 @@ -/* - * Copyright (c) 2009,2010 One Laptop per Child - * - * This program is free software. You can redistribute it and/or - * modify it under the terms of version 2 of the GNU General Public - * License as published by the Free Software Foundation. - */ - -#define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -#include <linux/acpi.h> -#include <linux/delay.h> -#include <linux/gpio.h> -#include <asm/olpc.h> - -/* TODO: this eventually belongs in linux/vx855.h */ -#define NR_VX855_GPI 14 -#define NR_VX855_GPO 13 -#define NR_VX855_GPIO 15 - -#define VX855_GPI(n) (n) -#define VX855_GPO(n) (NR_VX855_GPI + (n)) -#define VX855_GPIO(n) (NR_VX855_GPI + NR_VX855_GPO + (n)) - -#include "olpc_dcon.h" - -/* Hardware setup on the XO 1.5: - * DCONLOAD connects to VX855_GPIO1 (not SMBCK2) - * DCONBLANK connects to VX855_GPIO8 (not SSPICLK) unused in driver - * DCONSTAT0 connects to VX855_GPI10 (not SSPISDI) - * DCONSTAT1 connects to VX855_GPI11 (not nSSPISS) - * DCONIRQ connects to VX855_GPIO12 - * DCONSMBDATA connects to VX855 graphics CRTSPD - * DCONSMBCLK connects to VX855 graphics CRTSPCLK - */ - -#define VX855_GENL_PURPOSE_OUTPUT 0x44c /* PMIO_Rx4c-4f */ -#define VX855_GPI_STATUS_CHG 0x450 /* PMIO_Rx50 */ -#define VX855_GPI_SCI_SMI 0x452 /* PMIO_Rx52 */ -#define BIT_GPIO12 0x40 - -#define PREFIX "OLPC DCON:" - -static void dcon_clear_irq(void) -{ - /* irq status will appear in PMIO_Rx50[6] (RW1C) on gpio12 */ - outb(BIT_GPIO12, VX855_GPI_STATUS_CHG); -} - -static int dcon_was_irq(void) -{ - u_int8_t tmp; - - /* irq status will appear in PMIO_Rx50[6] on gpio12 */ - tmp = inb(VX855_GPI_STATUS_CHG); - return !!(tmp & BIT_GPIO12); - - return 0; -} - -static int dcon_init_xo_1_5(struct dcon_priv *dcon) -{ - unsigned int irq; - - dcon_clear_irq(); - - /* set PMIO_Rx52[6] to enable SCI/SMI on gpio12 */ - outb(inb(VX855_GPI_SCI_SMI)|BIT_GPIO12, VX855_GPI_SCI_SMI); - - /* Determine the current state of DCONLOAD, likely set by firmware */ - /* GPIO1 */ - dcon->curr_src = (inl(VX855_GENL_PURPOSE_OUTPUT) & 0x1000) ? - DCON_SOURCE_CPU : DCON_SOURCE_DCON; - dcon->pending_src = dcon->curr_src; - - /* we're sharing the IRQ with ACPI */ - irq = acpi_gbl_FADT.sci_interrupt; - if (request_irq(irq, &dcon_interrupt, IRQF_SHARED, "DCON", dcon)) { - pr_err("DCON (IRQ%d) allocation failed\n", irq); - return 1; - } - - return 0; -} - -static void set_i2c_line(int sda, int scl) -{ - unsigned char tmp; - unsigned int port = 0x26; - - /* FIXME: This directly accesses the CRT GPIO controller !!! */ - outb(port, 0x3c4); - tmp = inb(0x3c5); - - if (scl) - tmp |= 0x20; - else - tmp &= ~0x20; - - if (sda) - tmp |= 0x10; - else - tmp &= ~0x10; - - tmp |= 0x01; - - outb(port, 0x3c4); - outb(tmp, 0x3c5); -} - - -static void dcon_wiggle_xo_1_5(void) -{ - int x; - - /* - * According to HiMax, when powering the DCON up we should hold - * SMB_DATA high for 8 SMB_CLK cycles. This will force the DCON - * state machine to reset to a (sane) initial state. Mitch Bradley - * did some testing and discovered that holding for 16 SMB_CLK cycles - * worked a lot more reliably, so that's what we do here. - */ - set_i2c_line(1, 1); - - for (x = 0; x < 16; x++) { - udelay(5); - set_i2c_line(1, 0); - udelay(5); - set_i2c_line(1, 1); - } - udelay(5); - - /* set PMIO_Rx52[6] to enable SCI/SMI on gpio12 */ - outb(inb(VX855_GPI_SCI_SMI)|BIT_GPIO12, VX855_GPI_SCI_SMI); -} - -static void dcon_set_dconload_xo_1_5(int val) -{ - gpio_set_value(VX855_GPIO(1), val); -} - -static int dcon_read_status_xo_1_5(u8 *status) -{ - if (!dcon_was_irq()) - return -1; - - /* i believe this is the same as "inb(0x44b) & 3" */ - *status = gpio_get_value(VX855_GPI(10)); - *status |= gpio_get_value(VX855_GPI(11)) << 1; - - dcon_clear_irq(); - - return 0; -} - -struct dcon_platform_data dcon_pdata_xo_1_5 = { - .init = dcon_init_xo_1_5, - .bus_stabilize_wiggle = dcon_wiggle_xo_1_5, - .set_dconload = dcon_set_dconload_xo_1_5, - .read_status = dcon_read_status_xo_1_5, -}; diff --git a/drivers/staging/panel/Kconfig b/drivers/staging/panel/Kconfig deleted file mode 100644 index 3defa01..0000000 --- a/drivers/staging/panel/Kconfig +++ /dev/null @@ -1,278 +0,0 @@ -config PANEL - tristate "Parallel port LCD/Keypad Panel support" - depends on PARPORT - ---help--- - Say Y here if you have an HD44780 or KS-0074 LCD connected to your - parallel port. This driver also features 4 and 6-key keypads. The LCD - is accessible through the /dev/lcd char device (10, 156), and the - keypad through /dev/keypad (10, 185). Both require misc device to be - enabled. This code can either be compiled as a module, or linked into - the kernel and started at boot. If you don't understand what all this - is about, say N. - -config PANEL_PARPORT - int "Default parallel port number (0=LPT1)" - depends on PANEL - range 0 255 - default "0" - ---help--- - This is the index of the parallel port the panel is connected to. One - driver instance only supports one parallel port, so if your keypad - and LCD are connected to two separate ports, you have to start two - modules with different arguments. Numbering starts with '0' for LPT1, - and so on. - -config PANEL_PROFILE - int "Default panel profile (0-5, 0=custom)" - depends on PANEL - range 0 5 - default "5" - ---help--- - To ease configuration, the driver supports different configuration - profiles for past and recent wirings. These profiles can also be - used to define an approximative configuration, completed by a few - other options. Here are the profiles : - - 0 = custom (see further) - 1 = 2x16 parallel LCD, old keypad - 2 = 2x16 serial LCD (KS-0074), new keypad - 3 = 2x16 parallel LCD (Hantronix), no keypad - 4 = 2x16 parallel LCD (Nexcom NSA1045) with Nexcom's keypad - 5 = 2x40 parallel LCD (old one), with old keypad - - Custom configurations allow you to define how your display is - wired to the parallel port, and how it works. This is only intended - for experts. - -config PANEL_KEYPAD - depends on PANEL && PANEL_PROFILE="0" - int "Keypad type (0=none, 1=old 6 keys, 2=new 6 keys, 3=Nexcom 4 keys)" - range 0 3 - default 0 - ---help--- - This enables and configures a keypad connected to the parallel port. - The keys will be read from character device 10,185. Valid values are : - - 0 : do not enable this driver - 1 : old 6 keys keypad - 2 : new 6 keys keypad, as used on the server at www.ant-computing.com - 3 : Nexcom NSA1045's 4 keys keypad - - New profiles can be described in the driver source. The driver also - supports simultaneous keys pressed when the keypad supports them. - -config PANEL_LCD - depends on PANEL && PANEL_PROFILE="0" - int "LCD type (0=none, 1=custom, 2=old //, 3=ks0074, 4=hantronix, 5=Nexcom)" - range 0 5 - default 0 - ---help--- - This enables and configures an LCD connected to the parallel port. - The driver includes an interpreter for escape codes starting with - '\e[L' which are specific to the LCD, and a few ANSI codes. The - driver will be registered as character device 10,156, usually - under the name '/dev/lcd'. There are a total of 6 supported types : - - 0 : do not enable the driver - 1 : custom configuration and wiring (see further) - 2 : 2x16 & 2x40 parallel LCD (old wiring) - 3 : 2x16 serial LCD (KS-0074 based) - 4 : 2x16 parallel LCD (Hantronix wiring) - 5 : 2x16 parallel LCD (Nexcom wiring) - - When type '1' is specified, other options will appear to configure - more precise aspects (wiring, dimensions, protocol, ...). Please note - that those values changed from the 2.4 driver for better consistency. - -config PANEL_LCD_HEIGHT - depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1" - int "Number of lines on the LCD (1-2)" - range 1 2 - default 2 - ---help--- - This is the number of visible character lines on the LCD in custom profile. - It can either be 1 or 2. - -config PANEL_LCD_WIDTH - depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1" - int "Number of characters per line on the LCD (1-40)" - range 1 40 - default 40 - ---help--- - This is the number of characters per line on the LCD in custom profile. - Common values are 16,20,24,40. - -config PANEL_LCD_BWIDTH - depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1" - int "Internal LCD line width (1-40, 40 by default)" - range 1 40 - default 40 - ---help--- - Most LCDs use a standard controller which supports hardware lines of 40 - characters, although sometimes only 16, 20 or 24 of them are really wired - to the terminal. This results in some non-visible but addressable characters, - and is the case for most parallel LCDs. Other LCDs, and some serial ones, - however, use the same line width internally as what is visible. The KS0074 - for example, uses 16 characters per line for 16 visible characters per line. - - This option lets you configure the value used by your LCD in 'custom' profile. - If you don't know, put '40' here. - -config PANEL_LCD_HWIDTH - depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1" - int "Hardware LCD line width (1-64, 64 by default)" - range 1 64 - default 64 - ---help--- - Most LCDs use a single address bit to differentiate line 0 and line 1. Since - some of them need to be able to address 40 chars with the lower bits, they - often use the immediately superior power of 2, which is 64, to address the - next line. - - If you don't know what your LCD uses, in doubt let 16 here for a 2x16, and - 64 here for a 2x40. - -config PANEL_LCD_CHARSET - depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1" - int "LCD character set (0=normal, 1=KS0074)" - range 0 1 - default 0 - ---help--- - Some controllers such as the KS0074 use a somewhat strange character set - where many symbols are at unusual places. The driver knows how to map - 'standard' ASCII characters to the character sets used by these controllers. - Valid values are : - - 0 : normal (untranslated) character set - 1 : KS0074 character set - - If you don't know, use the normal one (0). - -config PANEL_LCD_PROTO - depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1" - int "LCD communication mode (0=parallel 8 bits, 1=serial)" - range 0 1 - default 0 - ---help--- - This driver now supports any serial or parallel LCD wired to a parallel - port. But before assigning signals, the driver needs to know if it will - be driving a serial LCD or a parallel one. Serial LCDs only use 2 wires - (SDA/SCL), while parallel ones use 2 or 3 wires for the control signals - (E, RS, sometimes RW), and 4 or 8 for the data. Use 0 here for a 8 bits - parallel LCD, and 1 for a serial LCD. - -config PANEL_LCD_PIN_E - depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1" && PANEL_LCD_PROTO="0" - int "Parallel port pin number & polarity connected to the LCD E signal (-17...17) " - range -17 17 - default 14 - ---help--- - This describes the number of the parallel port pin to which the LCD 'E' - signal has been connected. It can be : - - 0 : no connection (eg: connected to ground) - 1..17 : directly connected to any of these pins on the DB25 plug - -1..-17 : connected to the same pin through an inverter (eg: transistor). - - Default for the 'E' pin in custom profile is '14' (AUTOFEED). - -config PANEL_LCD_PIN_RS - depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1" && PANEL_LCD_PROTO="0" - int "Parallel port pin number & polarity connected to the LCD RS signal (-17...17) " - range -17 17 - default 17 - ---help--- - This describes the number of the parallel port pin to which the LCD 'RS' - signal has been connected. It can be : - - 0 : no connection (eg: connected to ground) - 1..17 : directly connected to any of these pins on the DB25 plug - -1..-17 : connected to the same pin through an inverter (eg: transistor). - - Default for the 'RS' pin in custom profile is '17' (SELECT IN). - -config PANEL_LCD_PIN_RW - depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1" && PANEL_LCD_PROTO="0" - int "Parallel port pin number & polarity connected to the LCD RW signal (-17...17) " - range -17 17 - default 16 - ---help--- - This describes the number of the parallel port pin to which the LCD 'RW' - signal has been connected. It can be : - - 0 : no connection (eg: connected to ground) - 1..17 : directly connected to any of these pins on the DB25 plug - -1..-17 : connected to the same pin through an inverter (eg: transistor). - - Default for the 'RW' pin in custom profile is '16' (INIT). - -config PANEL_LCD_PIN_SCL - depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1" && PANEL_LCD_PROTO!="0" - int "Parallel port pin number & polarity connected to the LCD SCL signal (-17...17) " - range -17 17 - default 1 - ---help--- - This describes the number of the parallel port pin to which the serial - LCD 'SCL' signal has been connected. It can be : - - 0 : no connection (eg: connected to ground) - 1..17 : directly connected to any of these pins on the DB25 plug - -1..-17 : connected to the same pin through an inverter (eg: transistor). - - Default for the 'SCL' pin in custom profile is '1' (STROBE). - -config PANEL_LCD_PIN_SDA - depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1" && PANEL_LCD_PROTO!="0" - int "Parallel port pin number & polarity connected to the LCD SDA signal (-17...17) " - range -17 17 - default 2 - ---help--- - This describes the number of the parallel port pin to which the serial - LCD 'SDA' signal has been connected. It can be : - - 0 : no connection (eg: connected to ground) - 1..17 : directly connected to any of these pins on the DB25 plug - -1..-17 : connected to the same pin through an inverter (eg: transistor). - - Default for the 'SDA' pin in custom profile is '2' (D0). - -config PANEL_LCD_PIN_BL - depends on PANEL && PANEL_PROFILE="0" && PANEL_LCD="1" - int "Parallel port pin number & polarity connected to the LCD backlight signal (-17...17) " - range -17 17 - default 0 - ---help--- - This describes the number of the parallel port pin to which the LCD 'BL' signal - has been connected. It can be : - - 0 : no connection (eg: connected to ground) - 1..17 : directly connected to any of these pins on the DB25 plug - -1..-17 : connected to the same pin through an inverter (eg: transistor). - - Default for the 'BL' pin in custom profile is '0' (uncontrolled). - -config PANEL_CHANGE_MESSAGE - depends on PANEL - bool "Change LCD initialization message ?" - default "n" - ---help--- - This allows you to replace the boot message indicating the kernel version - and the driver version with a custom message. This is useful on appliances - where a simple 'Starting system' message can be enough to stop a customer - from worrying. - - If you say 'Y' here, you'll be able to choose a message yourself. Otherwise, - say 'N' and keep the default message with the version. - -config PANEL_BOOT_MESSAGE - depends on PANEL && PANEL_CHANGE_MESSAGE="y" - string "New initialization message" - default "" - ---help--- - This allows you to replace the boot message indicating the kernel version - and the driver version with a custom message. This is useful on appliances - where a simple 'Starting system' message can be enough to stop a customer - from worrying. - - An empty message will only clear the display at driver init time. Any other - printf()-formatted message is valid with newline and escape codes. diff --git a/drivers/staging/panel/Makefile b/drivers/staging/panel/Makefile deleted file mode 100644 index 747c238..0000000 --- a/drivers/staging/panel/Makefile +++ /dev/null @@ -1 +0,0 @@ -obj-$(CONFIG_PANEL) += panel.o diff --git a/drivers/staging/panel/TODO b/drivers/staging/panel/TODO deleted file mode 100644 index 2db3f99..0000000 --- a/drivers/staging/panel/TODO +++ /dev/null @@ -1,8 +0,0 @@ -TODO: - - checkpatch.pl cleanups - - review major/minor usages - - review userspace api - - see if all of this could be easier done in userspace instead. - -Please send patches to Greg Kroah-Hartman <greg@kroah.com> and -Willy Tarreau <willy@meta-x.org> diff --git a/drivers/staging/slicoss/slic.h b/drivers/staging/slicoss/slic.h index c95b3ab..cc0afee 100644 --- a/drivers/staging/slicoss/slic.h +++ b/drivers/staging/slicoss/slic.h @@ -478,6 +478,8 @@ struct adapter { u32 max_isr_xmits; u32 rcv_interrupt_yields; u32 intagg_period; + u32 intagg_delay; + u32 dynamic_intagg; struct inicpm_state *inicpm_info; void *pinicpm_info; struct slic_ifevents if_events; diff --git a/drivers/staging/slicoss/slicoss.c b/drivers/staging/slicoss/slicoss.c index b23a2d1..c490b71 100644 --- a/drivers/staging/slicoss/slicoss.c +++ b/drivers/staging/slicoss/slicoss.c @@ -102,8 +102,7 @@ static char *slic_banner = "Alacritech SLIC Technology(tm) Server and Storage Ac static char *slic_proc_version = "2.0.351 2006/07/14 12:26:00"; static struct base_driver slic_global = { {}, 0, 0, 0, 1, NULL, NULL }; -static int intagg_delay = 100; -static u32 dynamic_intagg; +#define DEFAULT_INTAGG_DELAY 100 static unsigned int rcv_count; #define DRV_NAME "slicoss" @@ -119,17 +118,14 @@ MODULE_AUTHOR(DRV_AUTHOR); MODULE_DESCRIPTION(DRV_DESCRIPTION); MODULE_LICENSE("Dual BSD/GPL"); -module_param(dynamic_intagg, int, 0); -MODULE_PARM_DESC(dynamic_intagg, "Dynamic Interrupt Aggregation Setting"); -module_param(intagg_delay, int, 0); -MODULE_PARM_DESC(intagg_delay, "uSec Interrupt Aggregation Delay"); - static const struct pci_device_id slic_pci_tbl[] = { { PCI_DEVICE(PCI_VENDOR_ID_ALACRITECH, SLIC_1GB_DEVICE_ID) }, { PCI_DEVICE(PCI_VENDOR_ID_ALACRITECH, SLIC_2GB_DEVICE_ID) }, { 0 } }; +static struct ethtool_ops slic_ethtool_ops; + MODULE_DEVICE_TABLE(pci, slic_pci_tbl); static inline void slic_reg32_write(void __iomem *reg, u32 value, bool flush) @@ -2860,7 +2856,7 @@ static int slic_card_init(struct sliccard *card, struct adapter *adapter) if (slic_global.dynamic_intagg) slic_intagg_set(adapter, 0); else - slic_intagg_set(adapter, intagg_delay); + slic_intagg_set(adapter, adapter->intagg_delay); /* * Initialize ping status to "ok" @@ -2881,6 +2877,26 @@ card_init_err: return status; } +static int slic_get_coalesce(struct net_device *dev, + struct ethtool_coalesce *coalesce) +{ + struct adapter *adapter = netdev_priv(dev); + + adapter->intagg_delay = coalesce->rx_coalesce_usecs; + adapter->dynamic_intagg = coalesce->use_adaptive_rx_coalesce; + return 0; +} + +static int slic_set_coalesce(struct net_device *dev, + struct ethtool_coalesce *coalesce) +{ + struct adapter *adapter = netdev_priv(dev); + + coalesce->rx_coalesce_usecs = adapter->intagg_delay; + coalesce->use_adaptive_rx_coalesce = adapter->dynamic_intagg; + return 0; +} + static void slic_init_driver(void) { if (slic_first_init) { @@ -3069,8 +3085,6 @@ static int slic_entry_probe(struct pci_dev *pcidev, struct sliccard *card = NULL; int pci_using_dac = 0; - slic_global.dynamic_intagg = dynamic_intagg; - err = pci_enable_device(pcidev); if (err) @@ -3112,12 +3126,14 @@ static int slic_entry_probe(struct pci_dev *pcidev, goto err_out_exit_slic_probe; } + netdev->ethtool_ops = &slic_ethtool_ops; SET_NETDEV_DEV(netdev, &pcidev->dev); pci_set_drvdata(pcidev, netdev); adapter = netdev_priv(netdev); adapter->netdev = netdev; adapter->pcidev = pcidev; + slic_global.dynamic_intagg = adapter->dynamic_intagg; if (pci_using_dac) netdev->features |= NETIF_F_HIGHDMA; @@ -3204,5 +3220,10 @@ static void __exit slic_module_cleanup(void) pci_unregister_driver(&slic_driver); } +static struct ethtool_ops slic_ethtool_ops = { + .get_coalesce = slic_get_coalesce, + .set_coalesce = slic_set_coalesce +}; + module_init(slic_module_init); module_exit(slic_module_cleanup); diff --git a/drivers/staging/speakup/buffers.c b/drivers/staging/speakup/buffers.c index 8565c23..723d5df 100644 --- a/drivers/staging/speakup/buffers.c +++ b/drivers/staging/speakup/buffers.c @@ -27,7 +27,7 @@ void speakup_start_ttys(void) for (i = 0; i < MAX_NR_CONSOLES; i++) { if (speakup_console[i] && speakup_console[i]->tty_stopped) continue; - if ((vc_cons[i].d != NULL) && (vc_cons[i].d->port.tty != NULL)) + if ((vc_cons[i].d) && (vc_cons[i].d->port.tty)) start_tty(vc_cons[i].d->port.tty); } } @@ -38,7 +38,7 @@ static void speakup_stop_ttys(void) int i; for (i = 0; i < MAX_NR_CONSOLES; i++) - if ((vc_cons[i].d != NULL) && (vc_cons[i].d->port.tty != NULL)) + if ((vc_cons[i].d && (vc_cons[i].d->port.tty))) stop_tty(vc_cons[i].d->port.tty); } diff --git a/drivers/staging/speakup/devsynth.c b/drivers/staging/speakup/devsynth.c index d1ffdf4..8498971 100644 --- a/drivers/staging/speakup/devsynth.c +++ b/drivers/staging/speakup/devsynth.c @@ -76,9 +76,9 @@ void speakup_register_devsynth(void) if (misc_registered != 0) return; /* zero it so if register fails, deregister will not ref invalid ptrs */ - if (misc_register(&synth_device)) + if (misc_register(&synth_device)) { pr_warn("Couldn't initialize miscdevice /dev/synth.\n"); - else { + } else { pr_info("initialized device: /dev/synth, node (MAJOR %d, MINOR %d)\n", MISC_MAJOR, SYNTH_MINOR); misc_registered = 1; diff --git a/drivers/staging/speakup/fakekey.c b/drivers/staging/speakup/fakekey.c index 5e1f16c..8f058b4 100644 --- a/drivers/staging/speakup/fakekey.c +++ b/drivers/staging/speakup/fakekey.c @@ -12,10 +12,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/types.h> #include <linux/slab.h> @@ -28,7 +24,7 @@ #define PRESSED 1 #define RELEASED 0 -static DEFINE_PER_CPU(bool, reporting_keystroke); +static DEFINE_PER_CPU(int, reporting_keystroke); static struct input_dev *virt_keyboard; diff --git a/drivers/staging/speakup/keyhelp.c b/drivers/staging/speakup/keyhelp.c index 02d5c70..ce94cb1 100644 --- a/drivers/staging/speakup/keyhelp.c +++ b/drivers/staging/speakup/keyhelp.c @@ -14,10 +14,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/keyboard.h> @@ -74,7 +70,7 @@ static void build_key_data(void) for (i = 0; i < nstates; i++, kp++) { if (!*kp) continue; - if ((state_tbl[i]&16) != 0 && *kp == SPK_KEY) + if ((state_tbl[i] & 16) != 0 && *kp == SPK_KEY) continue; counters[*kp]++; } @@ -83,7 +79,7 @@ static void build_key_data(void) if (counters[i] == 0) continue; key_offsets[i] = offset; - offset += (counters[i]+1); + offset += (counters[i] + 1); if (offset >= MAXKEYS) break; } @@ -97,7 +93,7 @@ static void build_key_data(void) ch1 = *kp++; if (!ch1) continue; - if ((state_tbl[i]&16) != 0 && ch1 == SPK_KEY) + if ((state_tbl[i] & 16) != 0 && ch1 == SPK_KEY) continue; key = (state_tbl[i] << 8) + ch; counters[ch1]--; @@ -130,14 +126,14 @@ static int help_init(void) int i; int num_funcs = MSG_FUNCNAMES_END - MSG_FUNCNAMES_START + 1; - state_tbl = spk_our_keys[0]+SHIFT_TBL_SIZE+2; + state_tbl = spk_our_keys[0] + SHIFT_TBL_SIZE + 2; for (i = 0; i < num_funcs; i++) { char *cur_funcname = spk_msg_get(MSG_FUNCNAMES_START + i); if (start == *cur_funcname) continue; start = *cur_funcname; - letter_offsets[(start&31)-1] = i; + letter_offsets[(start & 31) - 1] = i; } return 0; } @@ -160,12 +156,12 @@ int spk_handle_help(struct vc_data *vc, u_char type, u_char ch, u_short key) ch |= 32; /* lower case */ if (ch < 'a' || ch > 'z') return -1; - if (letter_offsets[ch-'a'] == -1) { + if (letter_offsets[ch - 'a'] == -1) { synth_printf(spk_msg_get(MSG_NO_COMMAND), ch); synth_printf("\n"); return 1; } - cur_item = letter_offsets[ch-'a']; + cur_item = letter_offsets[ch - 'a']; } else if (type == KT_CUR) { if (ch == 0 && (MSG_FUNCNAMES_START + cur_item + 1) <= @@ -186,7 +182,7 @@ int spk_handle_help(struct vc_data *vc, u_char type, u_char ch, u_short key) name = NULL; if ((type != KT_SPKUP) && (key > 0) && (key <= num_key_names)) { synth_printf("%s\n", - spk_msg_get(MSG_KEYNAMES_START + key-1)); + spk_msg_get(MSG_KEYNAMES_START + key - 1)); return 1; } for (i = 0; funcvals[i] != 0 && !name; i++) { @@ -195,7 +191,7 @@ int spk_handle_help(struct vc_data *vc, u_char type, u_char ch, u_short key) } if (!name) return -1; - kp = spk_our_keys[key]+1; + kp = spk_our_keys[key] + 1; for (i = 0; i < nstates; i++) { if (ch == kp[i]) break; diff --git a/drivers/staging/speakup/main.c b/drivers/staging/speakup/main.c index 30cf973..eb8d65a 100644 --- a/drivers/staging/speakup/main.c +++ b/drivers/staging/speakup/main.c @@ -16,10 +16,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/kernel.h> diff --git a/drivers/staging/speakup/speakup_acntpc.c b/drivers/staging/speakup/speakup_acntpc.c index f418893..efb791b 100644 --- a/drivers/staging/speakup/speakup_acntpc.c +++ b/drivers/staging/speakup/speakup_acntpc.c @@ -14,11 +14,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * * this code is specificly written as a driver for the speakup screenreview * package and is not a general device driver. * This driver is for the Aicom Acent PC internal synthesizer. diff --git a/drivers/staging/speakup/speakup_acntsa.c b/drivers/staging/speakup/speakup_acntsa.c index af2690f..34f45d3 100644 --- a/drivers/staging/speakup/speakup_acntsa.c +++ b/drivers/staging/speakup/speakup_acntsa.c @@ -15,10 +15,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * * this code is specificly written as a driver for the speakup screenreview * package and is not a general device driver. */ diff --git a/drivers/staging/speakup/speakup_apollo.c b/drivers/staging/speakup/speakup_apollo.c index 51788f7..3cbc8a7 100644 --- a/drivers/staging/speakup/speakup_apollo.c +++ b/drivers/staging/speakup/speakup_apollo.c @@ -15,10 +15,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * * this code is specificly written as a driver for the speakup screenreview * package and is not a general device driver. */ diff --git a/drivers/staging/speakup/speakup_audptr.c b/drivers/staging/speakup/speakup_audptr.c index a9a6872..7a12b84 100644 --- a/drivers/staging/speakup/speakup_audptr.c +++ b/drivers/staging/speakup/speakup_audptr.c @@ -15,10 +15,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * * specificly written as a driver for the speakup screenreview * s not a general device driver. */ diff --git a/drivers/staging/speakup/speakup_bns.c b/drivers/staging/speakup/speakup_bns.c index 80f8358..570f0c2 100644 --- a/drivers/staging/speakup/speakup_bns.c +++ b/drivers/staging/speakup/speakup_bns.c @@ -15,10 +15,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * * this code is specificly written as a driver for the speakup screenreview * package and is not a general device driver. */ diff --git a/drivers/staging/speakup/speakup_decext.c b/drivers/staging/speakup/speakup_decext.c index e0b5db9..fdd7488 100644 --- a/drivers/staging/speakup/speakup_decext.c +++ b/drivers/staging/speakup/speakup_decext.c @@ -15,10 +15,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * * specificly written as a driver for the speakup screenreview * s not a general device driver. */ diff --git a/drivers/staging/speakup/speakup_decpc.c b/drivers/staging/speakup/speakup_decpc.c index 4893fef..d6479bd 100644 --- a/drivers/staging/speakup/speakup_decpc.c +++ b/drivers/staging/speakup/speakup_decpc.c @@ -24,10 +24,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #include <linux/jiffies.h> #include <linux/sched.h> diff --git a/drivers/staging/speakup/speakup_dectlk.c b/drivers/staging/speakup/speakup_dectlk.c index 09063b8..7646567 100644 --- a/drivers/staging/speakup/speakup_dectlk.c +++ b/drivers/staging/speakup/speakup_dectlk.c @@ -15,10 +15,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * * specificly written as a driver for the speakup screenreview * s not a general device driver. */ diff --git a/drivers/staging/speakup/speakup_dtlk.c b/drivers/staging/speakup/speakup_dtlk.c index 345efd33..38aa401 100644 --- a/drivers/staging/speakup/speakup_dtlk.c +++ b/drivers/staging/speakup/speakup_dtlk.c @@ -15,10 +15,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * * specificly written as a driver for the speakup screenreview * package it's not a general device driver. * This driver is for the RC Systems DoubleTalk PC internal synthesizer. diff --git a/drivers/staging/speakup/speakup_dummy.c b/drivers/staging/speakup/speakup_dummy.c index f668112..87d2a80 100644 --- a/drivers/staging/speakup/speakup_dummy.c +++ b/drivers/staging/speakup/speakup_dummy.c @@ -17,10 +17,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * * specificly written as a driver for the speakup screenreview * s not a general device driver. */ diff --git a/drivers/staging/speakup/speakup_keypc.c b/drivers/staging/speakup/speakup_keypc.c index 6ea0273..5e2170b 100644 --- a/drivers/staging/speakup/speakup_keypc.c +++ b/drivers/staging/speakup/speakup_keypc.c @@ -13,10 +13,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * * specificly written as a driver for the speakup screenreview * package it's not a general device driver. * This driver is for the Keynote Gold internal synthesizer. diff --git a/drivers/staging/speakup/speakup_ltlk.c b/drivers/staging/speakup/speakup_ltlk.c index cc4806b..b474e8b 100644 --- a/drivers/staging/speakup/speakup_ltlk.c +++ b/drivers/staging/speakup/speakup_ltlk.c @@ -15,10 +15,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * * specificly written as a driver for the speakup screenreview * s not a general device driver. */ diff --git a/drivers/staging/speakup/speakup_soft.c b/drivers/staging/speakup/speakup_soft.c index b2eb5b1..6b1d0f5 100644 --- a/drivers/staging/speakup/speakup_soft.c +++ b/drivers/staging/speakup/speakup_soft.c @@ -14,9 +14,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA * * this code is specificly written as a driver for the speakup screenreview * package and is not a general device driver. diff --git a/drivers/staging/speakup/speakup_spkout.c b/drivers/staging/speakup/speakup_spkout.c index 1007a61..e449f27 100644 --- a/drivers/staging/speakup/speakup_spkout.c +++ b/drivers/staging/speakup/speakup_spkout.c @@ -15,10 +15,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * * specificly written as a driver for the speakup screenreview * s not a general device driver. */ diff --git a/drivers/staging/speakup/speakup_txprt.c b/drivers/staging/speakup/speakup_txprt.c index 6c21e71..fd98d4f 100644 --- a/drivers/staging/speakup/speakup_txprt.c +++ b/drivers/staging/speakup/speakup_txprt.c @@ -15,10 +15,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - * * specificly written as a driver for the speakup screenreview * s not a general device driver. */ diff --git a/drivers/staging/speakup/spk_priv.h b/drivers/staging/speakup/spk_priv.h index 9bb281d..98c4b6f 100644 --- a/drivers/staging/speakup/spk_priv.h +++ b/drivers/staging/speakup/spk_priv.h @@ -16,10 +16,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #ifndef _SPEAKUP_PRIVATE_H #define _SPEAKUP_PRIVATE_H diff --git a/drivers/staging/speakup/spk_priv_keyinfo.h b/drivers/staging/speakup/spk_priv_keyinfo.h index 3116ef7..130e9cb 100644 --- a/drivers/staging/speakup/spk_priv_keyinfo.h +++ b/drivers/staging/speakup/spk_priv_keyinfo.h @@ -16,10 +16,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #ifndef _SPEAKUP_KEYINFO_H diff --git a/drivers/staging/speakup/spkguide.txt b/drivers/staging/speakup/spkguide.txt index b699de3..c23549c 100644 --- a/drivers/staging/speakup/spkguide.txt +++ b/drivers/staging/speakup/spkguide.txt @@ -1179,7 +1179,6 @@ if desired. Copyright (C) 2000,2001,2002 Free Software Foundation, Inc. - 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. diff --git a/drivers/staging/speakup/varhandlers.c b/drivers/staging/speakup/varhandlers.c index ab4fe8d..e1393d2 100644 --- a/drivers/staging/speakup/varhandlers.c +++ b/drivers/staging/speakup/varhandlers.c @@ -176,7 +176,6 @@ struct punc_var_t *spk_get_punc_var(enum var_id_t var_id) int spk_set_num_var(int input, struct st_var_header *var, int how) { int val; - short ret = 0; int *p_val = var->p_val; int l; char buf[32]; @@ -186,50 +185,51 @@ int spk_set_num_var(int input, struct st_var_header *var, int how) if (!var_data) return -ENODATA; - if (how == E_NEW_DEFAULT) { + val = var_data->u.n.value; + switch (how) { + case E_NEW_DEFAULT: if (input < var_data->u.n.low || input > var_data->u.n.high) return -ERANGE; var_data->u.n.default_val = input; return 0; - } - if (how == E_DEFAULT) { + case E_DEFAULT: val = var_data->u.n.default_val; - ret = -ERESTART; - } else { - if (how == E_SET) - val = input; - else - val = var_data->u.n.value; - if (how == E_INC) - val += input; - else if (how == E_DEC) - val -= input; - if (val < var_data->u.n.low || val > var_data->u.n.high) - return -ERANGE; + break; + case E_SET: + val = input; + break; + case E_INC: + val += input; + break; + case E_DEC: + val -= input; + break; } + + if (val < var_data->u.n.low || val > var_data->u.n.high) + return -ERANGE; + var_data->u.n.value = val; if (var->var_type == VAR_TIME && p_val != NULL) { *p_val = msecs_to_jiffies(val); - return ret; + return 0; } if (p_val != NULL) *p_val = val; if (var->var_id == PUNC_LEVEL) { spk_punc_mask = spk_punc_masks[val]; - return ret; + return 0; } if (var_data->u.n.multiplier != 0) val *= var_data->u.n.multiplier; val += var_data->u.n.offset; if (var->var_id < FIRST_SYNTH_VAR || !synth) - return ret; - if (synth->synth_adjust) { - int status = synth->synth_adjust(var); + return 0; + if (synth->synth_adjust) + return synth->synth_adjust(var); - return (status != 0) ? status : ret; - } if (!var_data->u.n.synth_fmt) - return ret; + return 0; if (var->var_id == PITCH) cp = spk_pitch_buff; else @@ -240,7 +240,7 @@ int spk_set_num_var(int input, struct st_var_header *var, int how) l = sprintf(cp, var_data->u.n.synth_fmt, var_data->u.n.out_str[val]); synth_printf("%s", cp); - return ret; + return 0; } int spk_set_string_var(const char *page, struct st_var_header *var, int len) diff --git a/drivers/staging/wilc1000/Makefile b/drivers/staging/wilc1000/Makefile index 20a5cb9..90c3760 100644 --- a/drivers/staging/wilc1000/Makefile +++ b/drivers/staging/wilc1000/Makefile @@ -1,8 +1,7 @@ obj-$(CONFIG_WILC1000) += wilc1000.o -ccflags-y += -DSTA_FIRMWARE=\"atmel/wilc1000_fw.bin\" \ - -DAP_FIRMWARE=\"atmel/wilc1000_ap_fw.bin\" \ - -DP2P_CONCURRENCY_FIRMWARE=\"atmel/wilc1000_p2p_fw.bin\" +ccflags-y += -DFIRMWARE_1002=\"atmel/wilc1002_firmware.bin\" \ + -DFIRMWARE_1003=\"atmel/wilc1003_firmware.bin\" ccflags-y += -I$(src)/ -DWILC_ASIC_A0 -DWILC_DEBUGFS #ccflags-y += -DTCP_ACK_FILTER diff --git a/drivers/staging/wilc1000/coreconfigurator.c b/drivers/staging/wilc1000/coreconfigurator.c index 2d4d3f1..49ae9b1 100644 --- a/drivers/staging/wilc1000/coreconfigurator.c +++ b/drivers/staging/wilc1000/coreconfigurator.c @@ -1,13 +1,3 @@ - -/*! - * @file coreconfigurator.c - * @brief - * @author - * @sa coreconfigurator.h - * @date 1 Mar 2012 - * @version 1.0 - */ - #include "coreconfigurator.h" #include "wilc_wlan_if.h" #include "wilc_wlan.h" @@ -16,7 +6,6 @@ #define TAG_PARAM_OFFSET (MAC_HDR_LEN + TIME_STAMP_LEN + \ BEACON_INTERVAL_LEN + CAP_INFO_LEN) -/* Basic Frame Type Codes (2-bit) */ enum basic_frame_type { FRAME_TYPE_CONTROL = 0x04, FRAME_TYPE_DATA = 0x08, @@ -25,7 +14,6 @@ enum basic_frame_type { FRAME_TYPE_FORCE_32BIT = 0xFFFFFFFF }; -/* Frame Type and Subtype Codes (6-bit) */ enum sub_frame_type { ASSOC_REQ = 0x00, ASSOC_RSP = 0x10, @@ -65,7 +53,6 @@ enum sub_frame_type { FRAME_SUBTYPE_FORCE_32BIT = 0xFFFFFFFF }; -/* Element ID of various Information Elements */ enum info_element_id { ISSID = 0, /* Service Set Identifier */ ISUPRATES = 1, /* Supported Rates */ @@ -109,8 +96,6 @@ enum info_element_id { INFOELEM_ID_FORCE_32BIT = 0xFFFFFFFF }; -/* This function extracts the beacon period field from the beacon or probe */ -/* response frame. */ static inline u16 get_beacon_period(u8 *data) { u16 bcn_per; @@ -147,54 +132,36 @@ static inline u32 get_beacon_timestamp_hi(u8 *data) return time_stamp; } -/* This function extracts the 'frame type and sub type' bits from the MAC */ -/* header of the input frame. */ -/* Returns the value in the LSB of the returned value. */ static inline enum sub_frame_type get_sub_type(u8 *header) { return ((enum sub_frame_type)(header[0] & 0xFC)); } -/* This function extracts the 'to ds' bit from the MAC header of the input */ -/* frame. */ -/* Returns the value in the LSB of the returned value. */ static inline u8 get_to_ds(u8 *header) { return (header[1] & 0x01); } -/* This function extracts the 'from ds' bit from the MAC header of the input */ -/* frame. */ -/* Returns the value in the LSB of the returned value. */ static inline u8 get_from_ds(u8 *header) { return ((header[1] & 0x02) >> 1); } -/* This function extracts the MAC Address in 'address1' field of the MAC */ -/* header and updates the MAC Address in the allocated 'addr' variable. */ static inline void get_address1(u8 *pu8msa, u8 *addr) { memcpy(addr, pu8msa + 4, 6); } -/* This function extracts the MAC Address in 'address2' field of the MAC */ -/* header and updates the MAC Address in the allocated 'addr' variable. */ static inline void get_address2(u8 *pu8msa, u8 *addr) { memcpy(addr, pu8msa + 10, 6); } -/* This function extracts the MAC Address in 'address3' field of the MAC */ -/* header and updates the MAC Address in the allocated 'addr' variable. */ static inline void get_address3(u8 *pu8msa, u8 *addr) { memcpy(addr, pu8msa + 16, 6); } -/* This function extracts the BSSID from the incoming WLAN packet based on */ -/* the 'from ds' bit, and updates the MAC Address in the allocated 'addr' */ -/* variable. */ static inline void get_BSSID(u8 *data, u8 *bssid) { if (get_from_ds(data) == 1) @@ -205,7 +172,6 @@ static inline void get_BSSID(u8 *data, u8 *bssid) get_address3(data, bssid); } -/* This function extracts the SSID from a beacon/probe response frame */ static inline void get_ssid(u8 *data, u8 *ssid, u8 *p_ssid_len) { u8 len = 0; @@ -217,8 +183,6 @@ static inline void get_ssid(u8 *data, u8 *ssid, u8 *p_ssid_len) j = MAC_HDR_LEN + TIME_STAMP_LEN + BEACON_INTERVAL_LEN + CAP_INFO_LEN + 2; - /* If the SSID length field is set wrongly to a value greater than the */ - /* allowed maximum SSID length limit, reset the length to 0 */ if (len >= MAX_SSID_LEN) len = 0; @@ -230,8 +194,6 @@ static inline void get_ssid(u8 *data, u8 *ssid, u8 *p_ssid_len) *p_ssid_len = len; } -/* This function extracts the capability info field from the beacon or probe */ -/* response frame. */ static inline u16 get_cap_info(u8 *data) { u16 cap_info = 0; @@ -240,8 +202,6 @@ static inline u16 get_cap_info(u8 *data) st = get_sub_type(data); - /* Location of the Capability field is different for Beacon and */ - /* Association frames. */ if ((st == BEACON) || (st == PROBE_RSP)) index += TIME_STAMP_LEN + BEACON_INTERVAL_LEN; @@ -251,8 +211,6 @@ static inline u16 get_cap_info(u8 *data) return cap_info; } -/* This function extracts the capability info field from the Association */ -/* response frame. */ static inline u16 get_assoc_resp_cap_info(u8 *data) { u16 cap_info; @@ -263,8 +221,6 @@ static inline u16 get_assoc_resp_cap_info(u8 *data) return cap_info; } -/* This function extracts the association status code from the incoming */ -/* association response frame and returns association status code */ static inline u16 get_asoc_status(u8 *data) { u16 asoc_status; @@ -275,8 +231,6 @@ static inline u16 get_asoc_status(u8 *data) return asoc_status; } -/* This function extracts association ID from the incoming association */ -/* response frame */ static inline u16 get_asoc_id(u8 *data) { u16 asoc_id; @@ -287,63 +241,35 @@ static inline u16 get_asoc_id(u8 *data) return asoc_id; } -static u8 *get_tim_elm(u8 *pu8msa, u16 u16RxLen, u16 u16TagParamOffset) +static u8 *get_tim_elm(u8 *pu8msa, u16 rx_len, u16 tag_param_offset) { - u16 u16index; - - /*************************************************************************/ - /* Beacon Frame - Frame Body */ - /* --------------------------------------------------------------------- */ - /* |Timestamp |BeaconInt |CapInfo |SSID |SupRates |DSParSet |TIM elm | */ - /* --------------------------------------------------------------------- */ - /* |8 |2 |2 |2-34 |3-10 |3 |4-256 | */ - /* --------------------------------------------------------------------- */ - /* */ - /*************************************************************************/ - - u16index = u16TagParamOffset; - - /* Search for the TIM Element Field and return if the element is found */ - while (u16index < (u16RxLen - FCS_LEN)) { - if (pu8msa[u16index] == ITIM) - return &pu8msa[u16index]; - u16index += (IE_HDR_LEN + pu8msa[u16index + 1]); + u16 index; + + index = tag_param_offset; + + while (index < (rx_len - FCS_LEN)) { + if (pu8msa[index] == ITIM) + return &pu8msa[index]; + index += (IE_HDR_LEN + pu8msa[index + 1]); } return NULL; } -/* This function gets the current channel information from - * the 802.11n beacon/probe response frame */ -static u8 get_current_channel_802_11n(u8 *pu8msa, u16 u16RxLen) +static u8 get_current_channel_802_11n(u8 *pu8msa, u16 rx_len) { u16 index; index = TAG_PARAM_OFFSET; - while (index < (u16RxLen - FCS_LEN)) { + while (index < (rx_len - FCS_LEN)) { if (pu8msa[index] == IDSPARMS) return pu8msa[index + 2]; - /* Increment index by length information and header */ index += pu8msa[index + 1] + IE_HDR_LEN; } - /* Return current channel information from the MIB, if beacon/probe */ - /* response frame does not contain the DS parameter set IE */ - /* return (mget_CurrentChannel() + 1); */ - return 0; /* no MIB here */ + return 0; } -/** - * @brief parses the received 'N' message - * @details - * @param[in] pu8MsgBuffer The message to be parsed - * @param[out] ppstrNetworkInfo pointer to pointer to the structure containing the parsed Network Info - * @return Error code indicating success/failure - * @note - * @author mabubakr - * @date 1 Mar 2012 - * @version 1.0 - */ s32 wilc_parse_network_info(u8 *pu8MsgBuffer, tstrNetworkInfo **ppstrNetworkInfo) { tstrNetworkInfo *pstrNetworkInfo = NULL; @@ -357,31 +283,20 @@ s32 wilc_parse_network_info(u8 *pu8MsgBuffer, tstrNetworkInfo **ppstrNetworkInfo u8MsgType = pu8MsgBuffer[0]; - /* Check whether the received message type is 'N' */ if ('N' != u8MsgType) { PRINT_ER("Received Message format incorrect.\n"); return -EFAULT; } - /* Extract message ID */ u8MsgID = pu8MsgBuffer[1]; - - /* Extract message Length */ u16MsgLen = MAKE_WORD16(pu8MsgBuffer[2], pu8MsgBuffer[3]); - - /* Extract WID ID */ u16WidID = MAKE_WORD16(pu8MsgBuffer[4], pu8MsgBuffer[5]); - - /* Extract WID Length */ u16WidLen = MAKE_WORD16(pu8MsgBuffer[6], pu8MsgBuffer[7]); - - /* Assign a pointer to the WID value */ pu8WidVal = &pu8MsgBuffer[8]; - /* parse the WID value of the WID "WID_NEWORK_INFO" */ { u8 *pu8msa = NULL; - u16 u16RxLen = 0; + u16 rx_len = 0; u8 *pu8TimElm = NULL; u8 *pu8IEs = NULL; u16 u16IEsLen = 0; @@ -395,51 +310,35 @@ s32 wilc_parse_network_info(u8 *pu8MsgBuffer, tstrNetworkInfo **ppstrNetworkInfo pstrNetworkInfo->s8rssi = pu8WidVal[0]; - /* Assign a pointer to msa "Mac Header Start Address" */ pu8msa = &pu8WidVal[1]; - u16RxLen = u16WidLen - 1; - - /* parse msa*/ - - /* Get the cap_info */ + rx_len = u16WidLen - 1; pstrNetworkInfo->u16CapInfo = get_cap_info(pu8msa); - /* Get time-stamp [Low only 32 bit] */ pstrNetworkInfo->u32Tsf = get_beacon_timestamp_lo(pu8msa); PRINT_D(CORECONFIG_DBG, "TSF :%x\n", pstrNetworkInfo->u32Tsf); - /* Get full time-stamp [Low and High 64 bit] */ u32Tsf_Lo = get_beacon_timestamp_lo(pu8msa); u32Tsf_Hi = get_beacon_timestamp_hi(pu8msa); pstrNetworkInfo->u64Tsf = u32Tsf_Lo | ((u64)u32Tsf_Hi << 32); - /* Get SSID */ get_ssid(pu8msa, pstrNetworkInfo->au8ssid, &pstrNetworkInfo->u8SsidLen); - - /* Get BSSID */ get_BSSID(pu8msa, pstrNetworkInfo->au8bssid); - /* - * Extract current channel information from - * the beacon/probe response frame - */ pstrNetworkInfo->u8channel = get_current_channel_802_11n(pu8msa, - u16RxLen + FCS_LEN); + rx_len + FCS_LEN); - /* Get beacon period */ u8index = MAC_HDR_LEN + TIME_STAMP_LEN; pstrNetworkInfo->u16BeaconPeriod = get_beacon_period(pu8msa + u8index); u8index += BEACON_INTERVAL_LEN + CAP_INFO_LEN; - /* Get DTIM Period */ - pu8TimElm = get_tim_elm(pu8msa, u16RxLen + FCS_LEN, u8index); + pu8TimElm = get_tim_elm(pu8msa, rx_len + FCS_LEN, u8index); if (pu8TimElm) pstrNetworkInfo->u8DtimPeriod = pu8TimElm[3]; pu8IEs = &pu8msa[MAC_HDR_LEN + TIME_STAMP_LEN + BEACON_INTERVAL_LEN + CAP_INFO_LEN]; - u16IEsLen = u16RxLen - (MAC_HDR_LEN + TIME_STAMP_LEN + BEACON_INTERVAL_LEN + CAP_INFO_LEN); + u16IEsLen = rx_len - (MAC_HDR_LEN + TIME_STAMP_LEN + BEACON_INTERVAL_LEN + CAP_INFO_LEN); if (u16IEsLen > 0) { pstrNetworkInfo->pu8IEs = kmemdup(pu8IEs, u16IEsLen, @@ -456,16 +355,6 @@ s32 wilc_parse_network_info(u8 *pu8MsgBuffer, tstrNetworkInfo **ppstrNetworkInfo return 0; } -/** - * @brief Deallocates the parsed Network Info - * @details - * @param[in] pstrNetworkInfo Network Info to be deallocated - * @return Error code indicating success/failure - * @note - * @author mabubakr - * @date 1 Mar 2012 - * @version 1.0 - */ s32 wilc_dealloc_network_info(tstrNetworkInfo *pstrNetworkInfo) { s32 s32Error = 0; @@ -488,17 +377,6 @@ s32 wilc_dealloc_network_info(tstrNetworkInfo *pstrNetworkInfo) return s32Error; } -/** - * @brief parses the received Association Response frame - * @details - * @param[in] pu8Buffer The Association Response frame to be parsed - * @param[out] ppstrConnectRespInfo pointer to pointer to the structure containing the parsed Association Response Info - * @return Error code indicating success/failure - * @note - * @author mabubakr - * @date 2 Apr 2012 - * @version 1.0 - */ s32 wilc_parse_assoc_resp_info(u8 *pu8Buffer, u32 u32BufferLen, tstrConnectRespInfo **ppstrConnectRespInfo) { @@ -512,20 +390,13 @@ s32 wilc_parse_assoc_resp_info(u8 *pu8Buffer, u32 u32BufferLen, if (!pstrConnectRespInfo) return -ENOMEM; - /* u16AssocRespLen = pu8Buffer[0]; */ u16AssocRespLen = (u16)u32BufferLen; - /* get the status code */ pstrConnectRespInfo->u16ConnectStatus = get_asoc_status(pu8Buffer); if (pstrConnectRespInfo->u16ConnectStatus == SUCCESSFUL_STATUSCODE) { - - /* get the capability */ pstrConnectRespInfo->u16capability = get_assoc_resp_cap_info(pu8Buffer); - - /* get the Association ID */ pstrConnectRespInfo->u16AssocID = get_asoc_id(pu8Buffer); - /* get the Information Elements */ pu8IEs = &pu8Buffer[CAP_INFO_LEN + STATUS_CODE_LEN + AID_LEN]; u16IEsLen = u16AssocRespLen - (CAP_INFO_LEN + STATUS_CODE_LEN + AID_LEN); @@ -541,16 +412,6 @@ s32 wilc_parse_assoc_resp_info(u8 *pu8Buffer, u32 u32BufferLen, return s32Error; } -/** - * @brief Deallocates the parsed Association Response Info - * @details - * @param[in] pstrNetworkInfo Network Info to be deallocated - * @return Error code indicating success/failure - * @note - * @author mabubakr - * @date 2 Apr 2012 - * @version 1.0 - */ s32 wilc_dealloc_assoc_resp_info(tstrConnectRespInfo *pstrConnectRespInfo) { s32 s32Error = 0; diff --git a/drivers/staging/wilc1000/host_interface.c b/drivers/staging/wilc1000/host_interface.c index 8c77520..d77e2b2 100644 --- a/drivers/staging/wilc1000/host_interface.c +++ b/drivers/staging/wilc1000/host_interface.c @@ -225,11 +225,11 @@ struct join_bss_param { u8 start_time[4]; }; -struct host_if_drv *terminated_handle; +static struct host_if_drv *terminated_handle; bool wilc_optaining_ip; static u8 P2P_LISTEN_STATE; static struct task_struct *hif_thread_handler; -static WILC_MsgQueueHandle hif_msg_q; +static struct message_queue hif_msg_q; static struct semaphore hif_sema_thread; static struct semaphore hif_sema_driver; static struct semaphore hif_sema_wait_response; @@ -263,6 +263,7 @@ static struct wilc_vif *join_req_vif; #define FLUSHED_BYTE_POS 79 static void *host_int_ParseJoinBssParam(tstrNetworkInfo *ptstrNetworkInfo); +static int host_int_get_ipaddress(struct wilc_vif *vif, u8 *ip_addr, u8 idx); /* The u8IfIdx starts from 0 to NUM_CONCURRENT_IFC -1, but 0 index used as * special purpose in wilc device, so we add 1 to the index to starts from 1. @@ -302,7 +303,7 @@ static s32 handle_set_channel(struct wilc_vif *vif, PRINT_D(HOSTINF_DBG, "Setting channel\n"); result = wilc_send_config_pkt(vif->wilc, SET_CFG, &wid, 1, - wilc_get_vif_idx(vif)); + wilc_get_vif_idx(vif)); if (result) { PRINT_ER("Failed to set channel\n"); @@ -349,7 +350,7 @@ static s32 handle_set_operation_mode(struct wilc_vif *vif, wid.size = sizeof(u32); result = wilc_send_config_pkt(vif->wilc, SET_CFG, &wid, 1, - wilc_get_vif_idx(vif)); + wilc_get_vif_idx(vif)); if ((hif_op_mode->mode) == IDLE_MODE) up(&hif_sema_driver); @@ -362,16 +363,11 @@ static s32 handle_set_operation_mode(struct wilc_vif *vif, return result; } -static s32 host_int_get_ipaddress(struct wilc_vif *vif, - struct host_if_drv *hif_drv, - u8 *u16ipadd, u8 idx); - static s32 handle_set_ip_address(struct wilc_vif *vif, u8 *ip_addr, u8 idx) { s32 result = 0; struct wid wid; char firmware_ip_addr[4] = {0}; - struct host_if_drv *hif_drv = vif->hif_drv; if (ip_addr[0] < 192) ip_addr[0] = 0; @@ -387,9 +383,9 @@ static s32 handle_set_ip_address(struct wilc_vif *vif, u8 *ip_addr, u8 idx) wid.size = IP_ALEN; result = wilc_send_config_pkt(vif->wilc, SET_CFG, &wid, 1, - wilc_get_vif_idx(vif)); + wilc_get_vif_idx(vif)); - host_int_get_ipaddress(vif, hif_drv, firmware_ip_addr, idx); + host_int_get_ipaddress(vif, firmware_ip_addr, idx); if (result) { PRINT_ER("Failed to set IP address\n"); @@ -412,7 +408,7 @@ static s32 handle_get_ip_address(struct wilc_vif *vif, u8 idx) wid.size = IP_ALEN; result = wilc_send_config_pkt(vif->wilc, GET_CFG, &wid, 1, - wilc_get_vif_idx(vif)); + wilc_get_vif_idx(vif)); PRINT_INFO(HOSTINF_DBG, "%pI4\n", wid.val); @@ -455,7 +451,7 @@ static s32 handle_set_mac_address(struct wilc_vif *vif, PRINT_D(GENERIC_DBG, "mac addr = :%pM\n", wid.val); result = wilc_send_config_pkt(vif->wilc, SET_CFG, &wid, 1, - wilc_get_vif_idx(vif)); + wilc_get_vif_idx(vif)); if (result) { PRINT_ER("Failed to set mac address\n"); result = -EFAULT; @@ -477,7 +473,7 @@ static s32 handle_get_mac_address(struct wilc_vif *vif, wid.size = ETH_ALEN; result = wilc_send_config_pkt(vif->wilc, GET_CFG, &wid, 1, - wilc_get_vif_idx(vif)); + wilc_get_vif_idx(vif)); if (result) { PRINT_ER("Failed to get mac address\n"); @@ -833,21 +829,21 @@ static s32 Handle_Scan(struct wilc_vif *vif, strWIDList[u32WidsCount].id = (u16)WID_SSID_PROBE_REQ; strWIDList[u32WidsCount].type = WID_STR; - for (i = 0; i < pstrHostIFscanAttr->hidden_network.u8ssidnum; i++) - valuesize += ((pstrHostIFscanAttr->hidden_network.pstrHiddenNetworkInfo[i].u8ssidlen) + 1); + for (i = 0; i < pstrHostIFscanAttr->hidden_network.n_ssids; i++) + valuesize += ((pstrHostIFscanAttr->hidden_network.net_info[i].ssid_len) + 1); pu8HdnNtwrksWidVal = kmalloc(valuesize + 1, GFP_KERNEL); strWIDList[u32WidsCount].val = pu8HdnNtwrksWidVal; if (strWIDList[u32WidsCount].val) { pu8Buffer = strWIDList[u32WidsCount].val; - *pu8Buffer++ = pstrHostIFscanAttr->hidden_network.u8ssidnum; + *pu8Buffer++ = pstrHostIFscanAttr->hidden_network.n_ssids; - PRINT_D(HOSTINF_DBG, "In Handle_ProbeRequest number of ssid %d\n", pstrHostIFscanAttr->hidden_network.u8ssidnum); + PRINT_D(HOSTINF_DBG, "In Handle_ProbeRequest number of ssid %d\n", pstrHostIFscanAttr->hidden_network.n_ssids); - for (i = 0; i < pstrHostIFscanAttr->hidden_network.u8ssidnum; i++) { - *pu8Buffer++ = pstrHostIFscanAttr->hidden_network.pstrHiddenNetworkInfo[i].u8ssidlen; - memcpy(pu8Buffer, pstrHostIFscanAttr->hidden_network.pstrHiddenNetworkInfo[i].pu8ssid, pstrHostIFscanAttr->hidden_network.pstrHiddenNetworkInfo[i].u8ssidlen); - pu8Buffer += pstrHostIFscanAttr->hidden_network.pstrHiddenNetworkInfo[i].u8ssidlen; + for (i = 0; i < pstrHostIFscanAttr->hidden_network.n_ssids; i++) { + *pu8Buffer++ = pstrHostIFscanAttr->hidden_network.net_info[i].ssid_len; + memcpy(pu8Buffer, pstrHostIFscanAttr->hidden_network.net_info[i].ssid, pstrHostIFscanAttr->hidden_network.net_info[i].ssid_len); + pu8Buffer += pstrHostIFscanAttr->hidden_network.net_info[i].ssid_len; } strWIDList[u32WidsCount].size = (s32)(valuesize + 1); @@ -916,8 +912,8 @@ ERRORHANDLER: kfree(pstrHostIFscanAttr->ies); pstrHostIFscanAttr->ies = NULL; - kfree(pstrHostIFscanAttr->hidden_network.pstrHiddenNetworkInfo); - pstrHostIFscanAttr->hidden_network.pstrHiddenNetworkInfo = NULL; + kfree(pstrHostIFscanAttr->hidden_network.net_info); + pstrHostIFscanAttr->hidden_network.net_info = NULL; kfree(pu8HdnNtwrksWidVal); @@ -943,7 +939,7 @@ static s32 Handle_ScanDone(struct wilc_vif *vif, wid.size = sizeof(char); result = wilc_send_config_pkt(vif->wilc, SET_CFG, &wid, 1, - wilc_get_vif_idx(vif)); + wilc_get_vif_idx(vif)); if (result) { PRINT_ER("Failed to set abort running scan\n"); @@ -1360,7 +1356,7 @@ static s32 Handle_ConnectTimeout(struct wilc_vif *vif) PRINT_D(HOSTINF_DBG, "Sending disconnect request\n"); result = wilc_send_config_pkt(vif->wilc, SET_CFG, &wid, 1, - wilc_get_vif_idx(vif)); + wilc_get_vif_idx(vif)); if (result) PRINT_ER("Failed to send dissconect config packet\n"); @@ -1754,8 +1750,8 @@ static int Handle_Key(struct wilc_vif *vif, strWIDList[3].val = (s8 *)pu8keybuf; result = wilc_send_config_pkt(vif->wilc, SET_CFG, - strWIDList, 4, - wilc_get_vif_idx(vif)); + strWIDList, 4, + wilc_get_vif_idx(vif)); kfree(pu8keybuf); } else if (pstrHostIFkeyAttr->action & ADDKEY) { PRINT_D(HOSTINF_DBG, "Handling WEP key\n"); @@ -1776,8 +1772,8 @@ static int Handle_Key(struct wilc_vif *vif, wid.size = pstrHostIFkeyAttr->attr.wep.key_len + 2; result = wilc_send_config_pkt(vif->wilc, SET_CFG, - &wid, 1, - wilc_get_vif_idx(vif)); + &wid, 1, + wilc_get_vif_idx(vif)); kfree(pu8keybuf); } else if (pstrHostIFkeyAttr->action & REMOVEKEY) { PRINT_D(HOSTINF_DBG, "Removing key\n"); @@ -1789,8 +1785,8 @@ static int Handle_Key(struct wilc_vif *vif, wid.size = 1; result = wilc_send_config_pkt(vif->wilc, SET_CFG, - &wid, 1, - wilc_get_vif_idx(vif)); + &wid, 1, + wilc_get_vif_idx(vif)); } else { wid.id = (u16)WID_KEY_ID; wid.type = WID_CHAR; @@ -1800,8 +1796,8 @@ static int Handle_Key(struct wilc_vif *vif, PRINT_D(HOSTINF_DBG, "Setting default key index\n"); result = wilc_send_config_pkt(vif->wilc, SET_CFG, - &wid, 1, - wilc_get_vif_idx(vif)); + &wid, 1, + wilc_get_vif_idx(vif)); } up(&hif_drv->sem_test_key_block); break; @@ -1834,8 +1830,8 @@ static int Handle_Key(struct wilc_vif *vif, strWIDList[1].size = RX_MIC_KEY_MSG_LEN; result = wilc_send_config_pkt(vif->wilc, SET_CFG, - strWIDList, 2, - wilc_get_vif_idx(vif)); + strWIDList, 2, + wilc_get_vif_idx(vif)); kfree(pu8keybuf); up(&hif_drv->sem_test_key_block); @@ -1866,8 +1862,8 @@ static int Handle_Key(struct wilc_vif *vif, wid.size = RX_MIC_KEY_MSG_LEN; result = wilc_send_config_pkt(vif->wilc, SET_CFG, - &wid, 1, - wilc_get_vif_idx(vif)); + &wid, 1, + wilc_get_vif_idx(vif)); kfree(pu8keybuf); up(&hif_drv->sem_test_key_block); @@ -1906,8 +1902,8 @@ _WPARxGtk_end_case_: strWIDList[1].size = PTK_KEY_MSG_LEN + 1; result = wilc_send_config_pkt(vif->wilc, SET_CFG, - strWIDList, 2, - wilc_get_vif_idx(vif)); + strWIDList, 2, + wilc_get_vif_idx(vif)); kfree(pu8keybuf); up(&hif_drv->sem_test_key_block); } else if (pstrHostIFkeyAttr->action & ADDKEY) { @@ -1929,8 +1925,8 @@ _WPARxGtk_end_case_: wid.size = PTK_KEY_MSG_LEN; result = wilc_send_config_pkt(vif->wilc, SET_CFG, - &wid, 1, - wilc_get_vif_idx(vif)); + &wid, 1, + wilc_get_vif_idx(vif)); kfree(pu8keybuf); up(&hif_drv->sem_test_key_block); } @@ -1965,7 +1961,7 @@ _WPAPtk_end_case_: wid.size = (pstrHostIFkeyAttr->attr.pmkid.numpmkid * PMKSA_KEY_LEN) + 1; result = wilc_send_config_pkt(vif->wilc, SET_CFG, &wid, 1, - wilc_get_vif_idx(vif)); + wilc_get_vif_idx(vif)); kfree(pu8keybuf); break; @@ -1998,7 +1994,7 @@ static void Handle_Disconnect(struct wilc_vif *vif) eth_zero_addr(wilc_connected_ssid); result = wilc_send_config_pkt(vif->wilc, SET_CFG, &wid, 1, - wilc_get_vif_idx(vif)); + wilc_get_vif_idx(vif)); if (result) { PRINT_ER("Failed to send dissconect config packet\n"); @@ -2089,7 +2085,7 @@ static s32 Handle_GetChnl(struct wilc_vif *vif) PRINT_D(HOSTINF_DBG, "Getting channel value\n"); result = wilc_send_config_pkt(vif->wilc, GET_CFG, &wid, 1, - wilc_get_vif_idx(vif)); + wilc_get_vif_idx(vif)); if (result) { PRINT_ER("Failed to get channel number\n"); @@ -2114,7 +2110,7 @@ static void Handle_GetRssi(struct wilc_vif *vif) PRINT_D(HOSTINF_DBG, "Getting RSSI value\n"); result = wilc_send_config_pkt(vif->wilc, GET_CFG, &wid, 1, - wilc_get_vif_idx(vif)); + wilc_get_vif_idx(vif)); if (result) { PRINT_ER("Failed to get RSSI value\n"); result = -EFAULT; @@ -2139,7 +2135,7 @@ static void Handle_GetLinkspeed(struct wilc_vif *vif) PRINT_D(HOSTINF_DBG, "Getting LINKSPEED value\n"); result = wilc_send_config_pkt(vif->wilc, GET_CFG, &wid, 1, - wilc_get_vif_idx(vif)); + wilc_get_vif_idx(vif)); if (result) { PRINT_ER("Failed to get LINKSPEED value\n"); result = -EFAULT; @@ -2185,8 +2181,8 @@ static s32 Handle_GetStatistics(struct wilc_vif *vif, u32WidsCount++; result = wilc_send_config_pkt(vif->wilc, GET_CFG, strWIDList, - u32WidsCount, - wilc_get_vif_idx(vif)); + u32WidsCount, + wilc_get_vif_idx(vif)); if (result) PRINT_ER("Failed to send scan paramters config packet\n"); @@ -2214,7 +2210,7 @@ static s32 Handle_Get_InActiveTime(struct wilc_vif *vif, PRINT_D(CFG80211_DBG, "SETING STA inactive time\n"); result = wilc_send_config_pkt(vif->wilc, SET_CFG, &wid, 1, - wilc_get_vif_idx(vif)); + wilc_get_vif_idx(vif)); if (result) { PRINT_ER("Failed to SET incative time\n"); @@ -2227,7 +2223,7 @@ static s32 Handle_Get_InActiveTime(struct wilc_vif *vif, wid.size = sizeof(u32); result = wilc_send_config_pkt(vif->wilc, GET_CFG, &wid, 1, - wilc_get_vif_idx(vif)); + wilc_get_vif_idx(vif)); if (result) { PRINT_ER("Failed to get incative time\n"); @@ -2315,7 +2311,7 @@ static void Handle_DelBeacon(struct wilc_vif *vif) PRINT_D(HOSTINF_DBG, "Deleting BEACON\n"); result = wilc_send_config_pkt(vif->wilc, SET_CFG, &wid, 1, - wilc_get_vif_idx(vif)); + wilc_get_vif_idx(vif)); if (result) PRINT_ER("Failed to send delete beacon config packet\n"); } @@ -2388,7 +2384,7 @@ static void Handle_AddStation(struct wilc_vif *vif, pu8CurrByte += WILC_HostIf_PackStaParam(pu8CurrByte, pstrStationParam); result = wilc_send_config_pkt(vif->wilc, SET_CFG, &wid, 1, - wilc_get_vif_idx(vif)); + wilc_get_vif_idx(vif)); if (result != 0) PRINT_ER("Failed to send add station config packet\n"); @@ -2430,7 +2426,7 @@ static void Handle_DelAllSta(struct wilc_vif *vif, } result = wilc_send_config_pkt(vif->wilc, SET_CFG, &wid, 1, - wilc_get_vif_idx(vif)); + wilc_get_vif_idx(vif)); if (result) PRINT_ER("Failed to send add station config packet\n"); @@ -2462,7 +2458,7 @@ static void Handle_DelStation(struct wilc_vif *vif, memcpy(pu8CurrByte, pstrDelStaParam->mac_addr, ETH_ALEN); result = wilc_send_config_pkt(vif->wilc, SET_CFG, &wid, 1, - wilc_get_vif_idx(vif)); + wilc_get_vif_idx(vif)); if (result) PRINT_ER("Failed to send add station config packet\n"); @@ -2490,7 +2486,7 @@ static void Handle_EditStation(struct wilc_vif *vif, pu8CurrByte += WILC_HostIf_PackStaParam(pu8CurrByte, pstrStationParam); result = wilc_send_config_pkt(vif->wilc, SET_CFG, &wid, 1, - wilc_get_vif_idx(vif)); + wilc_get_vif_idx(vif)); if (result) PRINT_ER("Failed to send edit station config packet\n"); @@ -2552,7 +2548,7 @@ static int Handle_RemainOnChan(struct wilc_vif *vif, wid.val[1] = (s8)pstrHostIfRemainOnChan->ch; result = wilc_send_config_pkt(vif->wilc, SET_CFG, &wid, 1, - wilc_get_vif_idx(vif)); + wilc_get_vif_idx(vif)); if (result != 0) PRINT_ER("Failed to set remain on channel\n"); @@ -2562,7 +2558,7 @@ ERRORHANDLER: hif_drv->remain_on_ch_timer.data = (unsigned long)vif; mod_timer(&hif_drv->remain_on_ch_timer, jiffies + - msecs_to_jiffies(pstrHostIfRemainOnChan->u32duration)); + msecs_to_jiffies(pstrHostIfRemainOnChan->duration)); if (hif_drv->remain_on_ch.ready) hif_drv->remain_on_ch.ready(hif_drv->remain_on_ch.arg); @@ -2600,7 +2596,7 @@ static int Handle_RegisterFrame(struct wilc_vif *vif, wid.size = sizeof(u16) + 2; result = wilc_send_config_pkt(vif->wilc, SET_CFG, &wid, 1, - wilc_get_vif_idx(vif)); + wilc_get_vif_idx(vif)); if (result) { PRINT_ER("Failed to frame register config packet\n"); result = -EINVAL; @@ -2635,7 +2631,7 @@ static u32 Handle_ListenStateExpired(struct wilc_vif *vif, wid.val[1] = FALSE_FRMWR_CHANNEL; result = wilc_send_config_pkt(vif->wilc, SET_CFG, &wid, 1, - wilc_get_vif_idx(vif)); + wilc_get_vif_idx(vif)); if (result != 0) { PRINT_ER("Failed to set remain on channel\n"); goto _done_; @@ -2693,7 +2689,7 @@ static void Handle_PowerManagement(struct wilc_vif *vif, PRINT_D(HOSTINF_DBG, "Handling Power Management\n"); result = wilc_send_config_pkt(vif->wilc, SET_CFG, &wid, 1, - wilc_get_vif_idx(vif)); + wilc_get_vif_idx(vif)); if (result) PRINT_ER("Failed to send power management config packet\n"); } @@ -2730,7 +2726,7 @@ static void Handle_SetMulticastFilter(struct wilc_vif *vif, ((strHostIfSetMulti->cnt) * ETH_ALEN)); result = wilc_send_config_pkt(vif->wilc, SET_CFG, &wid, 1, - wilc_get_vif_idx(vif)); + wilc_get_vif_idx(vif)); if (result) PRINT_ER("Failed to send setup multicast config packet\n"); @@ -2766,7 +2762,7 @@ static s32 Handle_DelAllRxBASessions(struct wilc_vif *vif, *ptr++ = 32; result = wilc_send_config_pkt(vif->wilc, SET_CFG, &wid, 1, - wilc_get_vif_idx(vif)); + wilc_get_vif_idx(vif)); if (result) PRINT_D(HOSTINF_DBG, "Couldn't delete BA Session\n"); @@ -3291,13 +3287,13 @@ int wilc_add_rx_gtk(struct wilc_vif *vif, const u8 *rx_gtk, u8 gtk_key_len, return result; } -s32 wilc_set_pmkid_info(struct wilc_vif *vif, - struct host_if_pmkid_attr *pu8PmkidInfoArray) +int wilc_set_pmkid_info(struct wilc_vif *vif, + struct host_if_pmkid_attr *pmkid) { - s32 result = 0; + int result = 0; struct host_if_msg msg; struct host_if_drv *hif_drv = vif->hif_drv; - u32 i; + int i; if (!hif_drv) { PRINT_ER("driver is null\n"); @@ -3311,11 +3307,11 @@ s32 wilc_set_pmkid_info(struct wilc_vif *vif, msg.body.key_info.action = ADDKEY; msg.vif = vif; - for (i = 0; i < pu8PmkidInfoArray->numpmkid; i++) { + for (i = 0; i < pmkid->numpmkid; i++) { memcpy(msg.body.key_info.attr.pmkid.pmkidlist[i].bssid, - &pu8PmkidInfoArray->pmkidlist[i].bssid, ETH_ALEN); + &pmkid->pmkidlist[i].bssid, ETH_ALEN); memcpy(msg.body.key_info.attr.pmkid.pmkidlist[i].pmkid, - &pu8PmkidInfoArray->pmkidlist[i].pmkid, PMKID_LEN); + &pmkid->pmkidlist[i].pmkid, PMKID_LEN); } result = wilc_mq_send(&hif_msg_q, &msg, sizeof(struct host_if_msg)); @@ -3325,15 +3321,15 @@ s32 wilc_set_pmkid_info(struct wilc_vif *vif, return result; } -s32 wilc_get_mac_address(struct wilc_vif *vif, u8 *pu8MacAddress) +int wilc_get_mac_address(struct wilc_vif *vif, u8 *mac_addr) { - s32 result = 0; + int result = 0; struct host_if_msg msg; memset(&msg, 0, sizeof(struct host_if_msg)); msg.id = HOST_IF_MSG_GET_MAC_ADDRESS; - msg.body.get_mac_info.mac_addr = pu8MacAddress; + msg.body.get_mac_info.mac_addr = mac_addr; msg.vif = vif; result = wilc_mq_send(&hif_msg_q, &msg, sizeof(struct host_if_msg)); @@ -3346,16 +3342,16 @@ s32 wilc_get_mac_address(struct wilc_vif *vif, u8 *pu8MacAddress) return result; } -s32 wilc_set_mac_address(struct wilc_vif *vif, u8 *pu8MacAddress) +int wilc_set_mac_address(struct wilc_vif *vif, u8 *mac_addr) { - s32 result = 0; + int result = 0; struct host_if_msg msg; - PRINT_D(GENERIC_DBG, "mac addr = %x:%x:%x\n", pu8MacAddress[0], pu8MacAddress[1], pu8MacAddress[2]); + PRINT_D(GENERIC_DBG, "mac addr = %x:%x:%x\n", mac_addr[0], mac_addr[1], mac_addr[2]); memset(&msg, 0, sizeof(struct host_if_msg)); msg.id = HOST_IF_MSG_SET_MAC_ADDRESS; - memcpy(msg.body.set_mac_info.mac_addr, pu8MacAddress, ETH_ALEN); + memcpy(msg.body.set_mac_info.mac_addr, mac_addr, ETH_ALEN); msg.vif = vif; result = wilc_mq_send(&hif_msg_q, &msg, sizeof(struct host_if_msg)); @@ -3365,22 +3361,22 @@ s32 wilc_set_mac_address(struct wilc_vif *vif, u8 *pu8MacAddress) return result; } -s32 wilc_set_join_req(struct wilc_vif *vif, u8 *pu8bssid, const u8 *pu8ssid, - size_t ssidLen, const u8 *pu8IEs, size_t IEsLen, - wilc_connect_result pfConnectResult, void *pvUserArg, - u8 u8security, enum AUTHTYPE tenuAuth_type, - u8 u8channel, void *pJoinParams) +int wilc_set_join_req(struct wilc_vif *vif, u8 *bssid, const u8 *ssid, + size_t ssid_len, const u8 *ies, size_t ies_len, + wilc_connect_result connect_result, void *user_arg, + u8 security, enum AUTHTYPE auth_type, + u8 channel, void *join_params) { - s32 result = 0; + int result = 0; struct host_if_msg msg; struct host_if_drv *hif_drv = vif->hif_drv; - if (!hif_drv || !pfConnectResult) { + if (!hif_drv || !connect_result) { PRINT_ER("Driver is null\n"); return -EFAULT; } - if (!pJoinParams) { + if (!join_params) { PRINT_ER("Unable to Join - JoinParams is NULL\n"); return -EFAULT; } @@ -3389,29 +3385,32 @@ s32 wilc_set_join_req(struct wilc_vif *vif, u8 *pu8bssid, const u8 *pu8ssid, msg.id = HOST_IF_MSG_CONNECT; - msg.body.con_info.security = u8security; - msg.body.con_info.auth_type = tenuAuth_type; - msg.body.con_info.ch = u8channel; - msg.body.con_info.result = pfConnectResult; - msg.body.con_info.arg = pvUserArg; - msg.body.con_info.params = pJoinParams; + msg.body.con_info.security = security; + msg.body.con_info.auth_type = auth_type; + msg.body.con_info.ch = channel; + msg.body.con_info.result = connect_result; + msg.body.con_info.arg = user_arg; + msg.body.con_info.params = join_params; msg.vif = vif; - if (pu8bssid) { - msg.body.con_info.bssid = kmalloc(6, GFP_KERNEL); - memcpy(msg.body.con_info.bssid, pu8bssid, 6); + if (bssid) { + msg.body.con_info.bssid = kmemdup(bssid, 6, GFP_KERNEL); + if (!msg.body.con_info.bssid) + return -ENOMEM; } - if (pu8ssid) { - msg.body.con_info.ssid_len = ssidLen; - msg.body.con_info.ssid = kmalloc(ssidLen, GFP_KERNEL); - memcpy(msg.body.con_info.ssid, pu8ssid, ssidLen); + if (ssid) { + msg.body.con_info.ssid_len = ssid_len; + msg.body.con_info.ssid = kmemdup(ssid, ssid_len, GFP_KERNEL); + if (!msg.body.con_info.ssid) + return -ENOMEM; } - if (pu8IEs) { - msg.body.con_info.ies_len = IEsLen; - msg.body.con_info.ies = kmalloc(IEsLen, GFP_KERNEL); - memcpy(msg.body.con_info.ies, pu8IEs, IEsLen); + if (ies) { + msg.body.con_info.ies_len = ies_len; + msg.body.con_info.ies = kmemdup(ies, ies_len, GFP_KERNEL); + if (!msg.body.con_info.ies) + return -ENOMEM; } if (hif_drv->hif_state < HOST_IF_CONNECTING) hif_drv->hif_state = HOST_IF_CONNECTING; @@ -3432,9 +3431,9 @@ s32 wilc_set_join_req(struct wilc_vif *vif, u8 *pu8bssid, const u8 *pu8ssid, return result; } -s32 wilc_flush_join_req(struct wilc_vif *vif) +int wilc_flush_join_req(struct wilc_vif *vif) { - s32 result = 0; + int result = 0; struct host_if_msg msg; struct host_if_drv *hif_drv = vif->hif_drv; @@ -3458,9 +3457,9 @@ s32 wilc_flush_join_req(struct wilc_vif *vif) return result; } -s32 wilc_disconnect(struct wilc_vif *vif, u16 u16ReasonCode) +int wilc_disconnect(struct wilc_vif *vif, u16 reason_code) { - s32 result = 0; + int result = 0; struct host_if_msg msg; struct host_if_drv *hif_drv = vif->hif_drv; @@ -3503,7 +3502,7 @@ static s32 host_int_get_assoc_res_info(struct wilc_vif *vif, wid.size = u32MaxAssocRespInfoLen; result = wilc_send_config_pkt(vif->wilc, GET_CFG, &wid, 1, - wilc_get_vif_idx(vif)); + wilc_get_vif_idx(vif)); if (result) { *pu32RcvdAssocRespInfoLen = 0; PRINT_ER("Failed to send association response config packet\n"); @@ -3625,9 +3624,9 @@ s32 wilc_get_inactive_time(struct wilc_vif *vif, const u8 *mac, return result; } -s32 wilc_get_rssi(struct wilc_vif *vif, s8 *ps8Rssi) +int wilc_get_rssi(struct wilc_vif *vif, s8 *rssi_level) { - s32 result = 0; + int result = 0; struct host_if_msg msg; struct host_if_drv *hif_drv = vif->hif_drv; @@ -3643,24 +3642,24 @@ s32 wilc_get_rssi(struct wilc_vif *vif, s8 *ps8Rssi) down(&hif_drv->sem_get_rssi); - if (!ps8Rssi) { + if (!rssi_level) { PRINT_ER("RSS pointer value is null"); return -EFAULT; } - *ps8Rssi = rssi; + *rssi_level = rssi; return result; } -s32 wilc_get_statistics(struct wilc_vif *vif, struct rf_info *pstrStatistics) +int wilc_get_statistics(struct wilc_vif *vif, struct rf_info *stats) { - s32 result = 0; + int result = 0; struct host_if_msg msg; memset(&msg, 0, sizeof(struct host_if_msg)); msg.id = HOST_IF_MSG_GET_STATISTICS; - msg.body.data = (char *)pstrStatistics; + msg.body.data = (char *)stats; msg.vif = vif; result = wilc_mq_send(&hif_msg_q, &msg, sizeof(struct host_if_msg)); @@ -3673,17 +3672,17 @@ s32 wilc_get_statistics(struct wilc_vif *vif, struct rf_info *pstrStatistics) return result; } -s32 wilc_scan(struct wilc_vif *vif, u8 u8ScanSource, u8 u8ScanType, - u8 *pu8ChnlFreqList, u8 u8ChnlListLen, const u8 *pu8IEs, - size_t IEsLen, wilc_scan_result ScanResult, void *pvUserArg, - struct hidden_network *pstrHiddenNetwork) +int wilc_scan(struct wilc_vif *vif, u8 scan_source, u8 scan_type, + u8 *ch_freq_list, u8 ch_list_len, const u8 *ies, + size_t ies_len, wilc_scan_result scan_result, void *user_arg, + struct hidden_network *hidden_network) { - s32 result = 0; + int result = 0; struct host_if_msg msg; struct host_if_drv *hif_drv = vif->hif_drv; - if (!hif_drv || !ScanResult) { - PRINT_ER("hif_drv or ScanResult = NULL\n"); + if (!hif_drv || !scan_result) { + PRINT_ER("hif_drv or scan_result = NULL\n"); return -EFAULT; } @@ -3691,26 +3690,30 @@ s32 wilc_scan(struct wilc_vif *vif, u8 u8ScanSource, u8 u8ScanType, msg.id = HOST_IF_MSG_SCAN; - if (pstrHiddenNetwork) { - msg.body.scan_info.hidden_network.pstrHiddenNetworkInfo = pstrHiddenNetwork->pstrHiddenNetworkInfo; - msg.body.scan_info.hidden_network.u8ssidnum = pstrHiddenNetwork->u8ssidnum; + if (hidden_network) { + msg.body.scan_info.hidden_network.net_info = hidden_network->net_info; + msg.body.scan_info.hidden_network.n_ssids = hidden_network->n_ssids; } else - PRINT_D(HOSTINF_DBG, "pstrHiddenNetwork IS EQUAL TO NULL\n"); + PRINT_D(HOSTINF_DBG, "hidden_network IS EQUAL TO NULL\n"); msg.vif = vif; - msg.body.scan_info.src = u8ScanSource; - msg.body.scan_info.type = u8ScanType; - msg.body.scan_info.result = ScanResult; - msg.body.scan_info.arg = pvUserArg; - - msg.body.scan_info.ch_list_len = u8ChnlListLen; - msg.body.scan_info.ch_freq_list = kmalloc(u8ChnlListLen, GFP_KERNEL); - memcpy(msg.body.scan_info.ch_freq_list, pu8ChnlFreqList, u8ChnlListLen); + msg.body.scan_info.src = scan_source; + msg.body.scan_info.type = scan_type; + msg.body.scan_info.result = scan_result; + msg.body.scan_info.arg = user_arg; + + msg.body.scan_info.ch_list_len = ch_list_len; + msg.body.scan_info.ch_freq_list = kmemdup(ch_freq_list, + ch_list_len, + GFP_KERNEL); + if (!msg.body.scan_info.ch_freq_list) + return -ENOMEM; - msg.body.scan_info.ies_len = IEsLen; - msg.body.scan_info.ies = kmalloc(IEsLen, GFP_KERNEL); - memcpy(msg.body.scan_info.ies, pu8IEs, IEsLen); + msg.body.scan_info.ies_len = ies_len; + msg.body.scan_info.ies = kmemdup(ies, ies_len, GFP_KERNEL); + if (!msg.body.scan_info.ies) + return -ENOMEM; result = wilc_mq_send(&hif_msg_q, &msg, sizeof(struct host_if_msg)); if (result) { @@ -3776,9 +3779,9 @@ static void GetPeriodicRSSI(unsigned long arg) mod_timer(&periodic_rssi, jiffies + msecs_to_jiffies(5000)); } -s32 wilc_init(struct net_device *dev, struct host_if_drv **hif_drv_handler) +int wilc_init(struct net_device *dev, struct host_if_drv **hif_drv_handler) { - s32 result = 0; + int result = 0; struct host_if_drv *hif_drv; struct wilc_vif *vif; struct wilc *wilc; @@ -4062,13 +4065,13 @@ void wilc_scan_complete_received(struct wilc *wilc, u8 *pu8Buffer, return; } -s32 wilc_remain_on_channel(struct wilc_vif *vif, u32 u32SessionID, - u32 u32duration, u16 chan, - wilc_remain_on_chan_expired RemainOnChanExpired, - wilc_remain_on_chan_ready RemainOnChanReady, - void *pvUserArg) +int wilc_remain_on_channel(struct wilc_vif *vif, u32 session_id, + u32 duration, u16 chan, + wilc_remain_on_chan_expired expired, + wilc_remain_on_chan_ready ready, + void *user_arg) { - s32 result = 0; + int result = 0; struct host_if_msg msg; struct host_if_drv *hif_drv = vif->hif_drv; @@ -4081,11 +4084,11 @@ s32 wilc_remain_on_channel(struct wilc_vif *vif, u32 u32SessionID, msg.id = HOST_IF_MSG_REMAIN_ON_CHAN; msg.body.remain_on_ch.ch = chan; - msg.body.remain_on_ch.expired = RemainOnChanExpired; - msg.body.remain_on_ch.ready = RemainOnChanReady; - msg.body.remain_on_ch.arg = pvUserArg; - msg.body.remain_on_ch.u32duration = u32duration; - msg.body.remain_on_ch.id = u32SessionID; + msg.body.remain_on_ch.expired = expired; + msg.body.remain_on_ch.ready = ready; + msg.body.remain_on_ch.arg = user_arg; + msg.body.remain_on_ch.duration = duration; + msg.body.remain_on_ch.id = session_id; msg.vif = vif; result = wilc_mq_send(&hif_msg_q, &msg, sizeof(struct host_if_msg)); @@ -4095,9 +4098,9 @@ s32 wilc_remain_on_channel(struct wilc_vif *vif, u32 u32SessionID, return result; } -s32 wilc_listen_state_expired(struct wilc_vif *vif, u32 u32SessionID) +int wilc_listen_state_expired(struct wilc_vif *vif, u32 session_id) { - s32 result = 0; + int result = 0; struct host_if_msg msg; struct host_if_drv *hif_drv = vif->hif_drv; @@ -4111,7 +4114,7 @@ s32 wilc_listen_state_expired(struct wilc_vif *vif, u32 u32SessionID) memset(&msg, 0, sizeof(struct host_if_msg)); msg.id = HOST_IF_MSG_LISTEN_TIMER_FIRED; msg.vif = vif; - msg.body.remain_on_ch.id = u32SessionID; + msg.body.remain_on_ch.id = session_id; result = wilc_mq_send(&hif_msg_q, &msg, sizeof(struct host_if_msg)); if (result) @@ -4120,9 +4123,9 @@ s32 wilc_listen_state_expired(struct wilc_vif *vif, u32 u32SessionID) return result; } -s32 wilc_frame_register(struct wilc_vif *vif, u16 u16FrameType, bool bReg) +int wilc_frame_register(struct wilc_vif *vif, u16 frame_type, bool reg) { - s32 result = 0; + int result = 0; struct host_if_msg msg; struct host_if_drv *hif_drv = vif->hif_drv; @@ -4134,7 +4137,7 @@ s32 wilc_frame_register(struct wilc_vif *vif, u16 u16FrameType, bool bReg) memset(&msg, 0, sizeof(struct host_if_msg)); msg.id = HOST_IF_MSG_REGISTER_FRAME; - switch (u16FrameType) { + switch (frame_type) { case ACTION: PRINT_D(HOSTINF_DBG, "ACTION\n"); msg.body.reg_frame.reg_id = ACTION_FRM_IDX; @@ -4149,8 +4152,8 @@ s32 wilc_frame_register(struct wilc_vif *vif, u16 u16FrameType, bool bReg) PRINT_D(HOSTINF_DBG, "Not valid frame type\n"); break; } - msg.body.reg_frame.frame_type = u16FrameType; - msg.body.reg_frame.reg = bReg; + msg.body.reg_frame.frame_type = frame_type; + msg.body.reg_frame.reg = reg; msg.vif = vif; result = wilc_mq_send(&hif_msg_q, &msg, sizeof(struct host_if_msg)); @@ -4160,12 +4163,12 @@ s32 wilc_frame_register(struct wilc_vif *vif, u16 u16FrameType, bool bReg) return result; } -s32 wilc_add_beacon(struct wilc_vif *vif, u32 u32Interval, u32 u32DTIMPeriod, - u32 u32HeadLen, u8 *pu8Head, u32 u32TailLen, u8 *pu8Tail) +int wilc_add_beacon(struct wilc_vif *vif, u32 interval, u32 dtim_period, + u32 head_len, u8 *head, u32 tail_len, u8 *tail) { - s32 result = 0; + int result = 0; struct host_if_msg msg; - struct beacon_attr *pstrSetBeaconParam = &msg.body.beacon_info; + struct beacon_attr *beacon_info = &msg.body.beacon_info; struct host_if_drv *hif_drv = vif->hif_drv; if (!hif_drv) { @@ -4179,25 +4182,24 @@ s32 wilc_add_beacon(struct wilc_vif *vif, u32 u32Interval, u32 u32DTIMPeriod, msg.id = HOST_IF_MSG_ADD_BEACON; msg.vif = vif; - pstrSetBeaconParam->interval = u32Interval; - pstrSetBeaconParam->dtim_period = u32DTIMPeriod; - pstrSetBeaconParam->head_len = u32HeadLen; - pstrSetBeaconParam->head = kmemdup(pu8Head, u32HeadLen, GFP_KERNEL); - if (!pstrSetBeaconParam->head) { + beacon_info->interval = interval; + beacon_info->dtim_period = dtim_period; + beacon_info->head_len = head_len; + beacon_info->head = kmemdup(head, head_len, GFP_KERNEL); + if (!beacon_info->head) { result = -ENOMEM; goto ERRORHANDLER; } - pstrSetBeaconParam->tail_len = u32TailLen; + beacon_info->tail_len = tail_len; - if (u32TailLen > 0) { - pstrSetBeaconParam->tail = kmemdup(pu8Tail, u32TailLen, - GFP_KERNEL); - if (!pstrSetBeaconParam->tail) { + if (tail_len > 0) { + beacon_info->tail = kmemdup(tail, tail_len, GFP_KERNEL); + if (!beacon_info->tail) { result = -ENOMEM; goto ERRORHANDLER; } } else { - pstrSetBeaconParam->tail = NULL; + beacon_info->tail = NULL; } result = wilc_mq_send(&hif_msg_q, &msg, sizeof(struct host_if_msg)); @@ -4206,9 +4208,9 @@ s32 wilc_add_beacon(struct wilc_vif *vif, u32 u32Interval, u32 u32DTIMPeriod, ERRORHANDLER: if (result) { - kfree(pstrSetBeaconParam->head); + kfree(beacon_info->head); - kfree(pstrSetBeaconParam->tail); + kfree(beacon_info->tail); } return result; @@ -4300,15 +4302,15 @@ int wilc_del_station(struct wilc_vif *vif, const u8 *mac_addr) return result; } -s32 wilc_del_allstation(struct wilc_vif *vif, u8 pu8MacAddr[][ETH_ALEN]) +int wilc_del_allstation(struct wilc_vif *vif, u8 mac_addr[][ETH_ALEN]) { - s32 result = 0; + int result = 0; struct host_if_msg msg; - struct del_all_sta *pstrDelAllStationMsg = &msg.body.del_all_sta_info; + struct del_all_sta *del_all_sta_info = &msg.body.del_all_sta_info; struct host_if_drv *hif_drv = vif->hif_drv; - u8 au8Zero_Buff[ETH_ALEN] = {0}; - u32 i; - u8 u8AssocNumb = 0; + u8 zero_addr[ETH_ALEN] = {0}; + int i; + u8 assoc_sta = 0; if (!hif_drv) { PRINT_ER("driver is null\n"); @@ -4323,24 +4325,24 @@ s32 wilc_del_allstation(struct wilc_vif *vif, u8 pu8MacAddr[][ETH_ALEN]) msg.vif = vif; for (i = 0; i < MAX_NUM_STA; i++) { - if (memcmp(pu8MacAddr[i], au8Zero_Buff, ETH_ALEN)) { - memcpy(pstrDelAllStationMsg->del_all_sta[i], pu8MacAddr[i], ETH_ALEN); + if (memcmp(mac_addr[i], zero_addr, ETH_ALEN)) { + memcpy(del_all_sta_info->del_all_sta[i], mac_addr[i], ETH_ALEN); PRINT_D(CFG80211_DBG, "BSSID = %x%x%x%x%x%x\n", - pstrDelAllStationMsg->del_all_sta[i][0], - pstrDelAllStationMsg->del_all_sta[i][1], - pstrDelAllStationMsg->del_all_sta[i][2], - pstrDelAllStationMsg->del_all_sta[i][3], - pstrDelAllStationMsg->del_all_sta[i][4], - pstrDelAllStationMsg->del_all_sta[i][5]); - u8AssocNumb++; + del_all_sta_info->del_all_sta[i][0], + del_all_sta_info->del_all_sta[i][1], + del_all_sta_info->del_all_sta[i][2], + del_all_sta_info->del_all_sta[i][3], + del_all_sta_info->del_all_sta[i][4], + del_all_sta_info->del_all_sta[i][5]); + assoc_sta++; } } - if (!u8AssocNumb) { + if (!assoc_sta) { PRINT_D(CFG80211_DBG, "NO ASSOCIATED STAS\n"); return result; } - pstrDelAllStationMsg->assoc_sta = u8AssocNumb; + del_all_sta_info->assoc_sta = assoc_sta; result = wilc_mq_send(&hif_msg_q, &msg, sizeof(struct host_if_msg)); if (result) @@ -4351,12 +4353,12 @@ s32 wilc_del_allstation(struct wilc_vif *vif, u8 pu8MacAddr[][ETH_ALEN]) return result; } -s32 wilc_edit_station(struct wilc_vif *vif, - struct add_sta_param *pstrStaParams) +int wilc_edit_station(struct wilc_vif *vif, + struct add_sta_param *sta_param) { - s32 result = 0; + int result = 0; struct host_if_msg msg; - struct add_sta_param *pstrAddStationMsg = &msg.body.add_sta_info; + struct add_sta_param *add_sta_info = &msg.body.add_sta_info; struct host_if_drv *hif_drv = vif->hif_drv; if (!hif_drv) { @@ -4371,16 +4373,13 @@ s32 wilc_edit_station(struct wilc_vif *vif, msg.id = HOST_IF_MSG_EDIT_STATION; msg.vif = vif; - memcpy(pstrAddStationMsg, pstrStaParams, sizeof(struct add_sta_param)); - if (pstrAddStationMsg->rates_len > 0) { - u8 *rates = kmalloc(pstrAddStationMsg->rates_len, GFP_KERNEL); - - if (!rates) + memcpy(add_sta_info, sta_param, sizeof(struct add_sta_param)); + if (add_sta_info->rates_len > 0) { + add_sta_info->rates = kmemdup(sta_param->rates, + add_sta_info->rates_len, + GFP_KERNEL); + if (!add_sta_info->rates) return -ENOMEM; - - memcpy(rates, pstrStaParams->rates, - pstrAddStationMsg->rates_len); - pstrAddStationMsg->rates = rates; } result = wilc_mq_send(&hif_msg_q, &msg, sizeof(struct host_if_msg)); @@ -4390,14 +4389,14 @@ s32 wilc_edit_station(struct wilc_vif *vif, return result; } -s32 wilc_set_power_mgmt(struct wilc_vif *vif, bool bIsEnabled, u32 u32Timeout) +int wilc_set_power_mgmt(struct wilc_vif *vif, bool enabled, u32 timeout) { - s32 result = 0; + int result = 0; struct host_if_msg msg; - struct power_mgmt_param *pstrPowerMgmtParam = &msg.body.pwr_mgmt_info; + struct power_mgmt_param *pwr_mgmt_info = &msg.body.pwr_mgmt_info; struct host_if_drv *hif_drv = vif->hif_drv; - PRINT_INFO(HOSTINF_DBG, "\n\n>> Setting PS to %d <<\n\n", bIsEnabled); + PRINT_INFO(HOSTINF_DBG, "\n\n>> Setting PS to %d <<\n\n", enabled); if (!hif_drv) { PRINT_ER("driver is null\n"); @@ -4411,8 +4410,8 @@ s32 wilc_set_power_mgmt(struct wilc_vif *vif, bool bIsEnabled, u32 u32Timeout) msg.id = HOST_IF_MSG_POWER_MGMT; msg.vif = vif; - pstrPowerMgmtParam->enabled = bIsEnabled; - pstrPowerMgmtParam->timeout = u32Timeout; + pwr_mgmt_info->enabled = enabled; + pwr_mgmt_info->timeout = timeout; result = wilc_mq_send(&hif_msg_q, &msg, sizeof(struct host_if_msg)); if (result) @@ -4420,12 +4419,12 @@ s32 wilc_set_power_mgmt(struct wilc_vif *vif, bool bIsEnabled, u32 u32Timeout) return result; } -s32 wilc_setup_multicast_filter(struct wilc_vif *vif, bool bIsEnabled, - u32 u32count) +int wilc_setup_multicast_filter(struct wilc_vif *vif, bool enabled, + u32 count) { - s32 result = 0; + int result = 0; struct host_if_msg msg; - struct set_multicast *pstrMulticastFilterParam = &msg.body.multicast_info; + struct set_multicast *multicast_filter_param = &msg.body.multicast_info; struct host_if_drv *hif_drv = vif->hif_drv; if (!hif_drv) { @@ -4440,8 +4439,8 @@ s32 wilc_setup_multicast_filter(struct wilc_vif *vif, bool bIsEnabled, msg.id = HOST_IF_MSG_SET_MULTICAST_FILTER; msg.vif = vif; - pstrMulticastFilterParam->enabled = bIsEnabled; - pstrMulticastFilterParam->cnt = u32count; + multicast_filter_param->enabled = enabled; + multicast_filter_param->cnt = count; result = wilc_mq_send(&hif_msg_q, &msg, sizeof(struct host_if_msg)); if (result) @@ -4606,19 +4605,11 @@ static void *host_int_ParseJoinBssParam(tstrNetworkInfo *ptstrNetworkInfo) return (void *)pNewJoinBssParam; } -void wilc_free_join_params(void *pJoinParams) +int wilc_del_all_rx_ba_session(struct wilc_vif *vif, char *bssid, char tid) { - if ((struct bss_param *)pJoinParams) - kfree((struct bss_param *)pJoinParams); - else - PRINT_ER("Unable to FREE null pointer\n"); -} - -s32 wilc_del_all_rx_ba_session(struct wilc_vif *vif, char *pBSSID, char TID) -{ - s32 result = 0; + int result = 0; struct host_if_msg msg; - struct ba_session_info *pBASessionInfo = &msg.body.session_info; + struct ba_session_info *ba_session_info = &msg.body.session_info; struct host_if_drv *hif_drv = vif->hif_drv; if (!hif_drv) { @@ -4630,8 +4621,8 @@ s32 wilc_del_all_rx_ba_session(struct wilc_vif *vif, char *pBSSID, char TID) msg.id = HOST_IF_MSG_DEL_ALL_RX_BA_SESSIONS; - memcpy(pBASessionInfo->bssid, pBSSID, ETH_ALEN); - pBASessionInfo->tid = TID; + memcpy(ba_session_info->bssid, bssid, ETH_ALEN); + ba_session_info->tid = tid; msg.vif = vif; result = wilc_mq_send(&hif_msg_q, &msg, sizeof(struct host_if_msg)); @@ -4643,14 +4634,12 @@ s32 wilc_del_all_rx_ba_session(struct wilc_vif *vif, char *pBSSID, char TID) return result; } -s32 wilc_setup_ipaddress(struct wilc_vif *vif, u8 *u16ipadd, u8 idx) +int wilc_setup_ipaddress(struct wilc_vif *vif, u8 *ip_addr, u8 idx) { - s32 result = 0; + int result = 0; struct host_if_msg msg; struct host_if_drv *hif_drv = vif->hif_drv; - return 0; - if (!hif_drv) { PRINT_ER("driver is null\n"); return -EFAULT; @@ -4660,7 +4649,7 @@ s32 wilc_setup_ipaddress(struct wilc_vif *vif, u8 *u16ipadd, u8 idx) msg.id = HOST_IF_MSG_SET_IPADDRESS; - msg.body.ip_info.ip_addr = u16ipadd; + msg.body.ip_info.ip_addr = ip_addr; msg.vif = vif; msg.body.ip_info.idx = idx; @@ -4671,12 +4660,11 @@ s32 wilc_setup_ipaddress(struct wilc_vif *vif, u8 *u16ipadd, u8 idx) return result; } -static s32 host_int_get_ipaddress(struct wilc_vif *vif, - struct host_if_drv *hif_drv, - u8 *u16ipadd, u8 idx) +static int host_int_get_ipaddress(struct wilc_vif *vif, u8 *ip_addr, u8 idx) { - s32 result = 0; + int result = 0; struct host_if_msg msg; + struct host_if_drv *hif_drv = vif->hif_drv; if (!hif_drv) { PRINT_ER("driver is null\n"); @@ -4687,7 +4675,7 @@ static s32 host_int_get_ipaddress(struct wilc_vif *vif, msg.id = HOST_IF_MSG_GET_IPADDRESS; - msg.body.ip_info.ip_addr = u16ipadd; + msg.body.ip_info.ip_addr = ip_addr; msg.vif = vif; msg.body.ip_info.idx = idx; diff --git a/drivers/staging/wilc1000/host_interface.h b/drivers/staging/wilc1000/host_interface.h index 8faac27..4c02e6b 100644 --- a/drivers/staging/wilc1000/host_interface.h +++ b/drivers/staging/wilc1000/host_interface.h @@ -186,13 +186,13 @@ struct rcvd_net_info { }; struct hidden_net_info { - u8 *pu8ssid; - u8 u8ssidlen; + u8 *ssid; + u8 ssid_len; }; struct hidden_network { - struct hidden_net_info *pstrHiddenNetworkInfo; - u8 u8ssidnum; + struct hidden_net_info *net_info; + u8 n_ssids; }; struct user_scan_req { @@ -240,7 +240,7 @@ struct ba_session_info { struct remain_ch { u16 ch; - u32 u32duration; + u32 duration; wilc_remain_on_chan_expired expired; wilc_remain_on_chan_ready ready; void *arg; @@ -312,66 +312,60 @@ int wilc_add_wep_key_bss_sta(struct wilc_vif *vif, const u8 *key, u8 len, u8 index); int wilc_add_wep_key_bss_ap(struct wilc_vif *vif, const u8 *key, u8 len, u8 index, u8 mode, enum AUTHTYPE auth_type); -s32 wilc_add_ptk(struct wilc_vif *vif, const u8 *pu8Ptk, u8 u8PtkKeylen, - const u8 *mac_addr, const u8 *pu8RxMic, const u8 *pu8TxMic, - u8 mode, u8 u8Ciphermode, u8 u8Idx); +int wilc_add_ptk(struct wilc_vif *vif, const u8 *ptk, u8 ptk_key_len, + const u8 *mac_addr, const u8 *rx_mic, const u8 *tx_mic, + u8 mode, u8 cipher_mode, u8 index); s32 wilc_get_inactive_time(struct wilc_vif *vif, const u8 *mac, u32 *pu32InactiveTime); -s32 wilc_add_rx_gtk(struct wilc_vif *vif, const u8 *pu8RxGtk, u8 u8GtkKeylen, - u8 u8KeyIdx, u32 u32KeyRSClen, const u8 *KeyRSC, - const u8 *pu8RxMic, const u8 *pu8TxMic, u8 mode, - u8 u8Ciphermode); -s32 wilc_add_tx_gtk(struct host_if_drv *hWFIDrv, u8 u8KeyLen, - u8 *pu8TxGtk, u8 u8KeyIdx); -s32 wilc_set_pmkid_info(struct wilc_vif *vif, - struct host_if_pmkid_attr *pu8PmkidInfoArray); -s32 wilc_get_mac_address(struct wilc_vif *vif, u8 *pu8MacAddress); -s32 wilc_set_mac_address(struct wilc_vif *vif, u8 *pu8MacAddress); +int wilc_add_rx_gtk(struct wilc_vif *vif, const u8 *rx_gtk, u8 gtk_key_len, + u8 index, u32 key_rsc_len, const u8 *key_rsc, + const u8 *rx_mic, const u8 *tx_mic, u8 mode, + u8 cipher_mode); +int wilc_set_pmkid_info(struct wilc_vif *vif, + struct host_if_pmkid_attr *pmkid); +int wilc_get_mac_address(struct wilc_vif *vif, u8 *mac_addr); +int wilc_set_mac_address(struct wilc_vif *vif, u8 *mac_addr); int wilc_wait_msg_queue_idle(void); -s32 wilc_set_start_scan_req(struct host_if_drv *hWFIDrv, u8 scanSource); -s32 wilc_set_join_req(struct wilc_vif *vif, u8 *pu8bssid, const u8 *pu8ssid, - size_t ssidLen, const u8 *pu8IEs, size_t IEsLen, - wilc_connect_result pfConnectResult, void *pvUserArg, - u8 u8security, enum AUTHTYPE tenuAuth_type, - u8 u8channel, void *pJoinParams); -s32 wilc_flush_join_req(struct wilc_vif *vif); -s32 wilc_disconnect(struct wilc_vif *vif, u16 u16ReasonCode); +int wilc_set_join_req(struct wilc_vif *vif, u8 *bssid, const u8 *ssid, + size_t ssid_len, const u8 *ies, size_t ies_len, + wilc_connect_result connect_result, void *user_arg, + u8 security, enum AUTHTYPE auth_type, + u8 channel, void *join_params); +int wilc_flush_join_req(struct wilc_vif *vif); +int wilc_disconnect(struct wilc_vif *vif, u16 reason_code); int wilc_set_mac_chnl_num(struct wilc_vif *vif, u8 channel); -s32 wilc_get_rssi(struct wilc_vif *vif, s8 *ps8Rssi); -s32 wilc_scan(struct wilc_vif *vif, u8 u8ScanSource, u8 u8ScanType, - u8 *pu8ChnlFreqList, u8 u8ChnlListLen, const u8 *pu8IEs, - size_t IEsLen, wilc_scan_result ScanResult, void *pvUserArg, - struct hidden_network *pstrHiddenNetwork); +int wilc_get_rssi(struct wilc_vif *vif, s8 *rssi_level); +int wilc_scan(struct wilc_vif *vif, u8 scan_source, u8 scan_type, + u8 *ch_freq_list, u8 ch_list_len, const u8 *ies, + size_t ies_len, wilc_scan_result scan_result, void *user_arg, + struct hidden_network *hidden_network); s32 wilc_hif_set_cfg(struct wilc_vif *vif, struct cfg_param_val *pstrCfgParamVal); -s32 wilc_init(struct net_device *dev, struct host_if_drv **phWFIDrv); +int wilc_init(struct net_device *dev, struct host_if_drv **hif_drv_handler); s32 wilc_deinit(struct wilc_vif *vif); -s32 wilc_add_beacon(struct wilc_vif *vif, u32 u32Interval, u32 u32DTIMPeriod, - u32 u32HeadLen, u8 *pu8Head, u32 u32TailLen, u8 *pu8Tail); +int wilc_add_beacon(struct wilc_vif *vif, u32 interval, u32 dtim_period, + u32 head_len, u8 *head, u32 tail_len, u8 *tail); int wilc_del_beacon(struct wilc_vif *vif); int wilc_add_station(struct wilc_vif *vif, struct add_sta_param *sta_param); -s32 wilc_del_allstation(struct wilc_vif *vif, u8 pu8MacAddr[][ETH_ALEN]); +int wilc_del_allstation(struct wilc_vif *vif, u8 mac_addr[][ETH_ALEN]); int wilc_del_station(struct wilc_vif *vif, const u8 *mac_addr); -s32 wilc_edit_station(struct wilc_vif *vif, - struct add_sta_param *pstrStaParams); -s32 wilc_set_power_mgmt(struct wilc_vif *vif, bool bIsEnabled, u32 u32Timeout); -s32 wilc_setup_multicast_filter(struct wilc_vif *vif, bool bIsEnabled, - u32 u32count); -s32 wilc_setup_ipaddress(struct wilc_vif *vif, u8 *u16ipadd, u8 idx); -s32 wilc_del_all_rx_ba_session(struct wilc_vif *vif, char *pBSSID, char TID); -s32 wilc_remain_on_channel(struct wilc_vif *vif, u32 u32SessionID, - u32 u32duration, u16 chan, - wilc_remain_on_chan_expired RemainOnChanExpired, - wilc_remain_on_chan_ready RemainOnChanReady, - void *pvUserArg); -s32 wilc_listen_state_expired(struct wilc_vif *vif, u32 u32SessionID); -s32 wilc_frame_register(struct wilc_vif *vif, u16 u16FrameType, bool bReg); +int wilc_edit_station(struct wilc_vif *vif, + struct add_sta_param *sta_param); +int wilc_set_power_mgmt(struct wilc_vif *vif, bool enabled, u32 timeout); +int wilc_setup_multicast_filter(struct wilc_vif *vif, bool enabled, + u32 count); +int wilc_setup_ipaddress(struct wilc_vif *vif, u8 *ip_addr, u8 idx); +int wilc_del_all_rx_ba_session(struct wilc_vif *vif, char *bssid, char tid); +int wilc_remain_on_channel(struct wilc_vif *vif, u32 session_id, + u32 duration, u16 chan, + wilc_remain_on_chan_expired expired, + wilc_remain_on_chan_ready ready, + void *user_arg); +int wilc_listen_state_expired(struct wilc_vif *vif, u32 session_id); +int wilc_frame_register(struct wilc_vif *vif, u16 frame_type, bool reg); int wilc_set_wfi_drv_handler(struct wilc_vif *vif, int index); int wilc_set_operation_mode(struct wilc_vif *vif, u32 mode); - -void wilc_free_join_params(void *pJoinParams); - -s32 wilc_get_statistics(struct wilc_vif *vif, struct rf_info *pstrStatistics); +int wilc_get_statistics(struct wilc_vif *vif, struct rf_info *stats); void wilc_resolve_disconnect_aberration(struct wilc_vif *vif); int wilc_get_vif_idx(struct wilc_vif *vif); diff --git a/drivers/staging/wilc1000/linux_mon.c b/drivers/staging/wilc1000/linux_mon.c index e550027..e9bb0ec 100644 --- a/drivers/staging/wilc1000/linux_mon.c +++ b/drivers/staging/wilc1000/linux_mon.c @@ -11,18 +11,17 @@ #include "wilc_wlan_if.h" #include "wilc_wlan.h" - struct wilc_wfi_radiotap_hdr { struct ieee80211_radiotap_header hdr; u8 rate; -} __attribute__((packed)); +} __packed; struct wilc_wfi_radiotap_cb_hdr { struct ieee80211_radiotap_header hdr; u8 rate; u8 dump; u16 tx_flags; -} __attribute__((packed)); +} __packed; static struct net_device *wilc_wfi_mon; /* global monitor netdev */ @@ -55,7 +54,7 @@ void WILC_WFI_monitor_rx(u8 *buff, u32 size) PRINT_INFO(HOSTAPD_DBG, "In monitor interface receive function\n"); - if (wilc_wfi_mon == NULL) + if (!wilc_wfi_mon) return; if (!netif_running(wilc_wfi_mon)) { @@ -71,18 +70,17 @@ void WILC_WFI_monitor_rx(u8 *buff, u32 size) pkt_offset = GET_PKT_OFFSET(header); if (pkt_offset & IS_MANAGMEMENT_CALLBACK) { - /* hostapd callback mgmt frame */ skb = dev_alloc_skb(size + sizeof(struct wilc_wfi_radiotap_cb_hdr)); - if (skb == NULL) { + if (!skb) { PRINT_INFO(HOSTAPD_DBG, "Monitor if : No memory to allocate skb"); return; } memcpy(skb_put(skb, size), buff, size); - cb_hdr = (struct wilc_wfi_radiotap_cb_hdr *) skb_push(skb, sizeof(*cb_hdr)); + cb_hdr = (struct wilc_wfi_radiotap_cb_hdr *)skb_push(skb, sizeof(*cb_hdr)); memset(cb_hdr, 0, sizeof(struct wilc_wfi_radiotap_cb_hdr)); cb_hdr->hdr.it_version = 0; /* PKTHDR_RADIOTAP_VERSION; */ @@ -103,16 +101,15 @@ void WILC_WFI_monitor_rx(u8 *buff, u32 size) } } else { - skb = dev_alloc_skb(size + sizeof(struct wilc_wfi_radiotap_hdr)); - if (skb == NULL) { + if (!skb) { PRINT_INFO(HOSTAPD_DBG, "Monitor if : No memory to allocate skb"); return; } memcpy(skb_put(skb, size), buff, size); - hdr = (struct wilc_wfi_radiotap_hdr *) skb_push(skb, sizeof(*hdr)); + hdr = (struct wilc_wfi_radiotap_hdr *)skb_push(skb, sizeof(*hdr)); memset(hdr, 0, sizeof(struct wilc_wfi_radiotap_hdr)); hdr->hdr.it_version = 0; /* PKTHDR_RADIOTAP_VERSION; */ hdr->hdr.it_len = cpu_to_le16(sizeof(struct wilc_wfi_radiotap_hdr)); @@ -121,11 +118,8 @@ void WILC_WFI_monitor_rx(u8 *buff, u32 size) (1 << IEEE80211_RADIOTAP_RATE); /* | */ PRINT_INFO(HOSTAPD_DBG, "Presentflags %d\n", hdr->hdr.it_present); hdr->rate = 5; /* txrate->bitrate / 5; */ - } - - skb->dev = wilc_wfi_mon; skb_set_mac_header(skb, 0); skb->ip_summed = CHECKSUM_UNNECESSARY; @@ -134,8 +128,6 @@ void WILC_WFI_monitor_rx(u8 *buff, u32 size) memset(skb->cb, 0, sizeof(skb->cb)); netif_rx(skb); - - } struct tx_complete_mon_data { @@ -145,12 +137,9 @@ struct tx_complete_mon_data { static void mgmt_tx_complete(void *priv, int status) { - struct tx_complete_mon_data *pv_data = (struct tx_complete_mon_data *)priv; u8 *buf = pv_data->buff; - - if (status == 1) { if (INFO || buf[0] == 0x10 || buf[0] == 0xb0) PRINT_INFO(HOSTAPD_DBG, "Packet sent successfully - Size = %d - Address = %p.\n", pv_data->size, pv_data->buff); @@ -158,35 +147,30 @@ static void mgmt_tx_complete(void *priv, int status) PRINT_INFO(HOSTAPD_DBG, "Couldn't send packet - Size = %d - Address = %p.\n", pv_data->size, pv_data->buff); } - - /* incase of fully hosting mode, the freeing will be done in response to the cfg packet */ kfree(pv_data->buff); kfree(pv_data); } + static int mon_mgmt_tx(struct net_device *dev, const u8 *buf, size_t len) { struct tx_complete_mon_data *mgmt_tx = NULL; - if (dev == NULL) { + if (!dev) { PRINT_D(HOSTAPD_DBG, "ERROR: dev == NULL\n"); return -EFAULT; } netif_stop_queue(dev); - mgmt_tx = kmalloc(sizeof(struct tx_complete_mon_data), GFP_ATOMIC); - if (mgmt_tx == NULL) { - PRINT_ER("Failed to allocate memory for mgmt_tx structure\n"); - return -EFAULT; - } + mgmt_tx = kmalloc(sizeof(*mgmt_tx), GFP_ATOMIC); + if (!mgmt_tx) + return -ENOMEM; mgmt_tx->buff = kmalloc(len, GFP_ATOMIC); - if (mgmt_tx->buff == NULL) { - PRINT_ER("Failed to allocate memory for mgmt_tx buff\n"); + if (!mgmt_tx->buff) { kfree(mgmt_tx); - return -EFAULT; - + return -ENOMEM; } mgmt_tx->size = len; @@ -217,17 +201,16 @@ static netdev_tx_t WILC_WFI_mon_xmit(struct sk_buff *skb, struct sk_buff *skb2; struct wilc_wfi_radiotap_cb_hdr *cb_hdr; - if (wilc_wfi_mon == NULL) + if (!wilc_wfi_mon) return -EFAULT; mon_priv = netdev_priv(wilc_wfi_mon); - if (mon_priv == NULL) { + if (!mon_priv) { PRINT_ER("Monitor interface private structure is NULL\n"); return -EFAULT; } - rtap_len = ieee80211_get_radiotap_len(skb->data); if (skb->len < rtap_len) { PRINT_ER("Error in radiotap header\n"); @@ -251,7 +234,7 @@ static netdev_tx_t WILC_WFI_mon_xmit(struct sk_buff *skb, memcpy(skb_put(skb2, skb->len), skb->data, skb->len); - cb_hdr = (struct wilc_wfi_radiotap_cb_hdr *) skb_push(skb2, sizeof(*cb_hdr)); + cb_hdr = (struct wilc_wfi_radiotap_cb_hdr *)skb_push(skb2, sizeof(*cb_hdr)); memset(cb_hdr, 0, sizeof(struct wilc_wfi_radiotap_cb_hdr)); cb_hdr->hdr.it_version = 0; /* PKTHDR_RADIOTAP_VERSION; */ @@ -280,8 +263,6 @@ static netdev_tx_t WILC_WFI_mon_xmit(struct sk_buff *skb, PRINT_INFO(HOSTAPD_DBG, "Skipping the radiotap header\n"); - - /* actual deliver of data is device-specific, and not shown here */ PRINT_INFO(HOSTAPD_DBG, "SKB netdevice name = %s\n", skb->dev->name); PRINT_INFO(HOSTAPD_DBG, "MONITOR real dev name = %s\n", mon_priv->real_ndev->name); @@ -294,8 +275,9 @@ static netdev_tx_t WILC_WFI_mon_xmit(struct sk_buff *skb, if (!(memcmp(srcAdd, bssid, 6))) { mon_mgmt_tx(mon_priv->real_ndev, skb->data, skb->len); dev_kfree_skb(skb); - } else + } else { ret = wilc_mac_xmit(skb, mon_priv->real_ndev); + } return ret; } @@ -316,8 +298,6 @@ static const struct net_device_ops wilc_wfi_netdev_ops = { */ struct net_device *WILC_WFI_init_mon_interface(const char *name, struct net_device *real_dev) { - - u32 ret = 0; struct WILC_WFI_mon_priv *priv; @@ -330,7 +310,6 @@ struct net_device *WILC_WFI_init_mon_interface(const char *name, struct net_devi if (!wilc_wfi_mon) { PRINT_ER("failed to allocate memory\n"); return NULL; - } wilc_wfi_mon->type = ARPHRD_IEEE80211_RADIOTAP; @@ -344,7 +323,7 @@ struct net_device *WILC_WFI_init_mon_interface(const char *name, struct net_devi return NULL; } priv = netdev_priv(wilc_wfi_mon); - if (priv == NULL) { + if (!priv) { PRINT_ER("private structure is NULL\n"); return NULL; } @@ -367,7 +346,7 @@ int WILC_WFI_deinit_mon_interface(void) { bool rollback_lock = false; - if (wilc_wfi_mon != NULL) { + if (wilc_wfi_mon) { PRINT_D(HOSTAPD_DBG, "In Deinit monitor interface\n"); PRINT_D(HOSTAPD_DBG, "RTNL is being locked\n"); if (rtnl_is_locked()) { @@ -384,5 +363,4 @@ int WILC_WFI_deinit_mon_interface(void) wilc_wfi_mon = NULL; } return 0; - } diff --git a/drivers/staging/wilc1000/linux_wlan.c b/drivers/staging/wilc1000/linux_wlan.c index 54fe9d7..b368c2d 100644 --- a/drivers/staging/wilc1000/linux_wlan.c +++ b/drivers/staging/wilc1000/linux_wlan.c @@ -288,26 +288,19 @@ static struct net_device *get_if_handler(struct wilc *wilc, u8 *mac_header) bssid = mac_header + 10; bssid1 = mac_header + 4; - for (i = 0; i < wilc->vif_num; i++) - if (!memcmp(bssid1, wilc->vif[i]->bssid, ETH_ALEN) || - !memcmp(bssid, wilc->vif[i]->bssid, ETH_ALEN)) - return wilc->vif[i]->ndev; - - PRINT_INFO(INIT_DBG, "Invalide handle\n"); - for (i = 0; i < 25; i++) - PRINT_D(INIT_DBG, "%02x ", mac_header[i]); - bssid = mac_header + 18; - bssid1 = mac_header + 12; - for (i = 0; i < wilc->vif_num; i++) - if (!memcmp(bssid1, wilc->vif[i]->bssid, ETH_ALEN) || - !memcmp(bssid, wilc->vif[i]->bssid, ETH_ALEN)) - return wilc->vif[i]->ndev; + for (i = 0; i < wilc->vif_num; i++) { + if (wilc->vif[i]->mode == STATION_MODE) + if (!memcmp(bssid, wilc->vif[i]->bssid, ETH_ALEN)) + return wilc->vif[i]->ndev; + if (wilc->vif[i]->mode == AP_MODE) + if (!memcmp(bssid1, wilc->vif[i]->bssid, ETH_ALEN)) + return wilc->vif[i]->ndev; + } - PRINT_INFO(INIT_DBG, "\n"); return NULL; } -int wilc_wlan_set_bssid(struct net_device *wilc_netdev, u8 *bssid) +int wilc_wlan_set_bssid(struct net_device *wilc_netdev, u8 *bssid, u8 mode) { int i = 0; int ret = -1; @@ -320,6 +313,7 @@ int wilc_wlan_set_bssid(struct net_device *wilc_netdev, u8 *bssid) for (i = 0; i < wilc->vif_num; i++) if (wilc->vif[i]->ndev == wilc_netdev) { memcpy(wilc->vif[i]->bssid, bssid, 6); + wilc->vif[i]->mode = mode; ret = 0; break; } @@ -391,9 +385,6 @@ static int linux_wlan_txq_task(void *vp) } if (ret == WILC_TX_ERR_NO_BUF) { - do { - msleep(TX_BACKOFF_WEIGHT_UNIT_MS << backoff_weight); - } while (0); backoff_weight += TX_BACKOFF_WEIGHT_INCR_STEP; if (backoff_weight > TX_BACKOFF_WEIGHT_MAX) backoff_weight = TX_BACKOFF_WEIGHT_MAX; @@ -419,21 +410,21 @@ int wilc_wlan_get_firmware(struct net_device *dev) { struct wilc_vif *vif; struct wilc *wilc; - int ret = 0; + int chip_id, ret = 0; const struct firmware *wilc_firmware; char *firmware; vif = netdev_priv(dev); wilc = vif->wilc; - if (vif->iftype == AP_MODE) { - firmware = AP_FIRMWARE; - } else if (vif->iftype == STATION_MODE) { - firmware = STA_FIRMWARE; - } else { - PRINT_D(INIT_DBG, "Get P2P_CONCURRENCY_FIRMWARE\n"); - firmware = P2P_CONCURRENCY_FIRMWARE; - } + chip_id = wilc_get_chipid(wilc, 0); + + if (chip_id < 0x1003a0) + firmware = FIRMWARE_1002; + else + firmware = FIRMWARE_1003; + + netdev_info(dev, "loading firmware %s\n", firmware); if (!vif) { PRINT_ER("vif is NULL\n"); @@ -514,20 +505,19 @@ static int wilc1000_firmware_download(struct net_device *dev) } static int linux_wlan_init_test_config(struct net_device *dev, - struct wilc *wilc) + struct wilc_vif *vif) { unsigned char c_val[64]; unsigned char mac_add[] = {0x00, 0x80, 0xC2, 0x5E, 0xa2, 0xff}; - + struct wilc *wilc = vif->wilc; struct wilc_priv *priv; struct host_if_drv *hif_drv; PRINT_D(TX_DBG, "Start configuring Firmware\n"); - get_random_bytes(&mac_add[5], 1); - get_random_bytes(&mac_add[4], 1); priv = wiphy_priv(dev->ieee80211_ptr->wiphy); hif_drv = (struct host_if_drv *)priv->hWILCWFIDrv; PRINT_D(INIT_DBG, "Host = %p\n", hif_drv); + wilc_get_mac_address(vif, mac_add); PRINT_D(INIT_DBG, "MAC address is : %02x-%02x-%02x-%02x-%02x-%02x\n", mac_add[0], mac_add[1], mac_add[2], @@ -947,7 +937,7 @@ int wilc1000_wlan_init(struct net_device *dev, struct wilc_vif *vif) Firmware_ver[size] = '\0'; PRINT_D(INIT_DBG, "***** Firmware Ver = %s *******\n", Firmware_ver); } - ret = linux_wlan_init_test_config(dev, wl); + ret = linux_wlan_init_test_config(dev, vif); if (ret < 0) { PRINT_ER("Failed to configure firmware\n"); @@ -1003,7 +993,7 @@ int wilc_mac_open(struct net_device *ndev) vif = netdev_priv(ndev); wl = vif->wilc; - if (!wl|| !wl->dev) { + if (!wl || !wl->dev) { netdev_err(ndev, "wilc1000: SPI device not ready\n"); return -ENODEV; } @@ -1028,14 +1018,13 @@ int wilc_mac_open(struct net_device *ndev) return ret; } - wilc_set_machw_change_vir_if(ndev, false); - wilc_get_mac_address(vif, mac_add); PRINT_D(INIT_DBG, "Mac address: %pM\n", mac_add); for (i = 0; i < wl->vif_num; i++) { if (ndev == wl->vif[i]->ndev) { memcpy(wl->vif[i]->src_addr, mac_add, ETH_ALEN); + wilc_set_operation_mode(vif, vif->iftype); break; } } @@ -1065,7 +1054,7 @@ int wilc_mac_open(struct net_device *ndev) static struct net_device_stats *mac_stats(struct net_device *dev) { - struct wilc_vif *vif= netdev_priv(dev); + struct wilc_vif *vif = netdev_priv(dev); return &vif->netstats; } @@ -1278,7 +1267,7 @@ static int mac_ioctl(struct net_device *ndev, struct ifreq *req, int cmd) switch (cmd) { case SIOCSIWPRIV: { - struct iwreq *wrq = (struct iwreq *) req; + struct iwreq *wrq = (struct iwreq *)req; size = wrq->u.data.length; @@ -1333,6 +1322,9 @@ void wilc_frmw_to_linux(struct wilc *wilc, u8 *buff, u32 size, u32 pkt_offset) struct net_device *wilc_netdev; struct wilc_vif *vif; + if (!wilc) + return; + wilc_netdev = get_if_handler(wilc, buff); if (!wilc_netdev) return; @@ -1349,14 +1341,8 @@ void wilc_frmw_to_linux(struct wilc *wilc, u8 *buff, u32 size, u32 pkt_offset) PRINT_ER("Low memory - packet droped\n"); return; } - - if (!wilc || !wilc_netdev) - PRINT_ER("wilc_netdev in wilc is NULL"); skb->dev = wilc_netdev; - if (!skb->dev) - PRINT_ER("skb->dev is NULL\n"); - memcpy(skb_put(skb, frame_len), buff_to_send, frame_len); skb->protocol = eth_type_trans(skb, wilc_netdev); @@ -1403,7 +1389,7 @@ void wilc_netdev_cleanup(struct wilc *wilc) release_firmware(wilc->firmware); if (wilc && (wilc->vif[0]->ndev || wilc->vif[1]->ndev)) { - wilc_lock_timeout(wilc, &close_exit_sync, 12 * 1000); + wilc_lock_timeout(wilc, &close_exit_sync, 5 * 1000); for (i = 0; i < NUM_CONCURRENT_IFC; i++) if (wilc->vif[i]->ndev) diff --git a/drivers/staging/wilc1000/wilc_debugfs.c b/drivers/staging/wilc1000/wilc_debugfs.c index 27c653a..291e6fa 100644 --- a/drivers/staging/wilc1000/wilc_debugfs.c +++ b/drivers/staging/wilc1000/wilc_debugfs.c @@ -89,7 +89,7 @@ static ssize_t wilc_debug_region_read(struct file *file, char __user *userbuf, s return simple_read_from_buffer(userbuf, count, ppos, buf, res); } -static ssize_t wilc_debug_region_write(struct file *filp, const char *buf, size_t count, loff_t *ppos) +static ssize_t wilc_debug_region_write(struct file *filp, const char __user *buf, size_t count, loff_t *ppos) { char buffer[128] = {}; int flag; diff --git a/drivers/staging/wilc1000/wilc_msgqueue.c b/drivers/staging/wilc1000/wilc_msgqueue.c index 098390c..5fe85eb 100644 --- a/drivers/staging/wilc1000/wilc_msgqueue.c +++ b/drivers/staging/wilc1000/wilc_msgqueue.c @@ -11,13 +11,13 @@ * @note copied from FLO glue implementatuion * @version 1.0 */ -int wilc_mq_create(WILC_MsgQueueHandle *pHandle) +int wilc_mq_create(struct message_queue *mq) { - spin_lock_init(&pHandle->strCriticalSection); - sema_init(&pHandle->hSem, 0); - pHandle->pstrMessageList = NULL; - pHandle->u32ReceiversCount = 0; - pHandle->bExiting = false; + spin_lock_init(&mq->lock); + sema_init(&mq->sem, 0); + INIT_LIST_HEAD(&mq->msg_list); + mq->recv_count = 0; + mq->exiting = false; return 0; } @@ -27,21 +27,22 @@ int wilc_mq_create(WILC_MsgQueueHandle *pHandle) * @note copied from FLO glue implementatuion * @version 1.0 */ -int wilc_mq_destroy(WILC_MsgQueueHandle *pHandle) +int wilc_mq_destroy(struct message_queue *mq) { - pHandle->bExiting = true; + struct message *msg; + + mq->exiting = true; /* Release any waiting receiver thread. */ - while (pHandle->u32ReceiversCount > 0) { - up(&pHandle->hSem); - pHandle->u32ReceiversCount--; + while (mq->recv_count > 0) { + up(&mq->sem); + mq->recv_count--; } - while (pHandle->pstrMessageList) { - Message *pstrMessge = pHandle->pstrMessageList->pstrNext; - - kfree(pHandle->pstrMessageList); - pHandle->pstrMessageList = pstrMessge; + while (!list_empty(&mq->msg_list)) { + msg = list_first_entry(&mq->msg_list, struct message, list); + list_del(&msg->list); + kfree(msg->buf); } return 0; @@ -53,53 +54,43 @@ int wilc_mq_destroy(WILC_MsgQueueHandle *pHandle) * @note copied from FLO glue implementatuion * @version 1.0 */ -int wilc_mq_send(WILC_MsgQueueHandle *pHandle, - const void *pvSendBuffer, u32 u32SendBufferSize) +int wilc_mq_send(struct message_queue *mq, + const void *send_buf, u32 send_buf_size) { unsigned long flags; - Message *pstrMessage = NULL; + struct message *new_msg = NULL; - if ((!pHandle) || (u32SendBufferSize == 0) || (!pvSendBuffer)) { - PRINT_ER("pHandle or pvSendBuffer is null\n"); - return -EFAULT; + if ((!mq) || (send_buf_size == 0) || (!send_buf)) { + PRINT_ER("mq or send_buf is null\n"); + return -EINVAL; } - if (pHandle->bExiting) { - PRINT_ER("pHandle fail\n"); + if (mq->exiting) { + PRINT_ER("mq fail\n"); return -EFAULT; } /* construct a new message */ - pstrMessage = kmalloc(sizeof(Message), GFP_ATOMIC); - if (!pstrMessage) + new_msg = kmalloc(sizeof(*new_msg), GFP_ATOMIC); + if (!new_msg) return -ENOMEM; - pstrMessage->u32Length = u32SendBufferSize; - pstrMessage->pstrNext = NULL; - pstrMessage->pvBuffer = kmemdup(pvSendBuffer, u32SendBufferSize, - GFP_ATOMIC); - if (!pstrMessage->pvBuffer) { - kfree(pstrMessage); + new_msg->len = send_buf_size; + INIT_LIST_HEAD(&new_msg->list); + new_msg->buf = kmemdup(send_buf, send_buf_size, GFP_ATOMIC); + if (!new_msg->buf) { + kfree(new_msg); return -ENOMEM; } - spin_lock_irqsave(&pHandle->strCriticalSection, flags); + spin_lock_irqsave(&mq->lock, flags); /* add it to the message queue */ - if (!pHandle->pstrMessageList) { - pHandle->pstrMessageList = pstrMessage; - } else { - Message *pstrTailMsg = pHandle->pstrMessageList; - - while (pstrTailMsg->pstrNext) - pstrTailMsg = pstrTailMsg->pstrNext; + list_add_tail(&new_msg->list, &mq->msg_list); - pstrTailMsg->pstrNext = pstrMessage; - } + spin_unlock_irqrestore(&mq->lock, flags); - spin_unlock_irqrestore(&pHandle->strCriticalSection, flags); - - up(&pHandle->hSem); + up(&mq->sem); return 0; } @@ -110,62 +101,55 @@ int wilc_mq_send(WILC_MsgQueueHandle *pHandle, * @note copied from FLO glue implementatuion * @version 1.0 */ -int wilc_mq_recv(WILC_MsgQueueHandle *pHandle, - void *pvRecvBuffer, u32 u32RecvBufferSize, - u32 *pu32ReceivedLength) +int wilc_mq_recv(struct message_queue *mq, + void *recv_buf, u32 recv_buf_size, u32 *recv_len) { - Message *pstrMessage; + struct message *msg; unsigned long flags; - if ((!pHandle) || (u32RecvBufferSize == 0) - || (!pvRecvBuffer) || (!pu32ReceivedLength)) { - PRINT_ER("pHandle or pvRecvBuffer is null\n"); + if ((!mq) || (recv_buf_size == 0) || (!recv_buf) || (!recv_len)) { + PRINT_ER("mq or recv_buf is null\n"); return -EINVAL; } - if (pHandle->bExiting) { - PRINT_ER("pHandle fail\n"); + if (mq->exiting) { + PRINT_ER("mq fail\n"); return -EFAULT; } - spin_lock_irqsave(&pHandle->strCriticalSection, flags); - pHandle->u32ReceiversCount++; - spin_unlock_irqrestore(&pHandle->strCriticalSection, flags); - - down(&pHandle->hSem); - - if (pHandle->bExiting) { - PRINT_ER("pHandle fail\n"); - return -EFAULT; - } + spin_lock_irqsave(&mq->lock, flags); + mq->recv_count++; + spin_unlock_irqrestore(&mq->lock, flags); - spin_lock_irqsave(&pHandle->strCriticalSection, flags); + down(&mq->sem); + spin_lock_irqsave(&mq->lock, flags); - pstrMessage = pHandle->pstrMessageList; - if (!pstrMessage) { - spin_unlock_irqrestore(&pHandle->strCriticalSection, flags); - PRINT_ER("pstrMessage is null\n"); + if (list_empty(&mq->msg_list)) { + spin_unlock_irqrestore(&mq->lock, flags); + up(&mq->sem); + PRINT_ER("msg is null\n"); return -EFAULT; } /* check buffer size */ - if (u32RecvBufferSize < pstrMessage->u32Length) { - spin_unlock_irqrestore(&pHandle->strCriticalSection, flags); - up(&pHandle->hSem); - PRINT_ER("u32RecvBufferSize overflow\n"); + msg = list_first_entry(&mq->msg_list, struct message, list); + if (recv_buf_size < msg->len) { + spin_unlock_irqrestore(&mq->lock, flags); + up(&mq->sem); + PRINT_ER("recv_buf_size overflow\n"); return -EOVERFLOW; } /* consume the message */ - pHandle->u32ReceiversCount--; - memcpy(pvRecvBuffer, pstrMessage->pvBuffer, pstrMessage->u32Length); - *pu32ReceivedLength = pstrMessage->u32Length; + mq->recv_count--; + memcpy(recv_buf, msg->buf, msg->len); + *recv_len = msg->len; - pHandle->pstrMessageList = pstrMessage->pstrNext; + list_del(&msg->list); - kfree(pstrMessage->pvBuffer); - kfree(pstrMessage); + kfree(msg->buf); + kfree(msg); - spin_unlock_irqrestore(&pHandle->strCriticalSection, flags); + spin_unlock_irqrestore(&mq->lock, flags); return 0; } diff --git a/drivers/staging/wilc1000/wilc_msgqueue.h b/drivers/staging/wilc1000/wilc_msgqueue.h index d7e0328..846a484 100644 --- a/drivers/staging/wilc1000/wilc_msgqueue.h +++ b/drivers/staging/wilc1000/wilc_msgqueue.h @@ -1,94 +1,28 @@ #ifndef __WILC_MSG_QUEUE_H__ #define __WILC_MSG_QUEUE_H__ -/*! - * @file wilc_msgqueue.h - * @brief Message Queue OS wrapper functionality - * @author syounan - * @sa wilc_oswrapper.h top level OS wrapper file - * @date 30 Aug 2010 - * @version 1.0 - */ - #include <linux/semaphore.h> - -/* Message Queue type is a structure */ -typedef struct __Message_struct { - void *pvBuffer; - u32 u32Length; - struct __Message_struct *pstrNext; -} Message; - -typedef struct __MessageQueue_struct { - struct semaphore hSem; - spinlock_t strCriticalSection; - bool bExiting; - u32 u32ReceiversCount; - Message *pstrMessageList; -} WILC_MsgQueueHandle; - -/*! - * @brief Creates a new Message queue - * @details Creates a new Message queue, if the feature - * CONFIG_WILC_MSG_QUEUE_IPC_NAME is enabled and pstrAttrs->pcName - * is not Null, then this message queue can be used for IPC with - * any other message queue having the same name in the system - * @param[in,out] pHandle handle to the message queue object - * @param[in] pstrAttrs Optional attributes, NULL for default - * @return Error code indicating success/failure - * @author syounan - * @date 30 Aug 2010 - * @version 1.0 - */ -int wilc_mq_create(WILC_MsgQueueHandle *pHandle); - -/*! - * @brief Sends a message - * @details Sends a message, this API will block until the message is - * actually sent or until it is timedout (as long as the feature - * CONFIG_WILC_MSG_QUEUE_TIMEOUT is enabled and pstrAttrs->u32Timeout - * is not set to WILC_OS_INFINITY), zero timeout is a valid value - * @param[in] pHandle handle to the message queue object - * @param[in] pvSendBuffer pointer to the data to send - * @param[in] u32SendBufferSize the size of the data to send - * @param[in] pstrAttrs Optional attributes, NULL for default - * @return Error code indicating success/failure - * @author syounan - * @date 30 Aug 2010 - * @version 1.0 - */ -int wilc_mq_send(WILC_MsgQueueHandle *pHandle, - const void *pvSendBuffer, u32 u32SendBufferSize); - -/*! - * @brief Receives a message - * @details Receives a message, this API will block until a message is - * received or until it is timedout (as long as the feature - * CONFIG_WILC_MSG_QUEUE_TIMEOUT is enabled and pstrAttrs->u32Timeout - * is not set to WILC_OS_INFINITY), zero timeout is a valid value - * @param[in] pHandle handle to the message queue object - * @param[out] pvRecvBuffer pointer to a buffer to fill with the received message - * @param[in] u32RecvBufferSize the size of the receive buffer - * @param[out] pu32ReceivedLength the length of received data - * @param[in] pstrAttrs Optional attributes, NULL for default - * @return Error code indicating success/failure - * @author syounan - * @date 30 Aug 2010 - * @version 1.0 - */ -int wilc_mq_recv(WILC_MsgQueueHandle *pHandle, - void *pvRecvBuffer, u32 u32RecvBufferSize, - u32 *pu32ReceivedLength); - -/*! - * @brief Destroys an existing Message queue - * @param[in] pHandle handle to the message queue object - * @param[in] pstrAttrs Optional attributes, NULL for default - * @return Error code indicating success/failure - * @author syounan - * @date 30 Aug 2010 - * @version 1.0 - */ -int wilc_mq_destroy(WILC_MsgQueueHandle *pHandle); +#include <linux/list.h> + +struct message { + void *buf; + u32 len; + struct list_head list; +}; + +struct message_queue { + struct semaphore sem; + spinlock_t lock; + bool exiting; + u32 recv_count; + struct list_head msg_list; +}; + +int wilc_mq_create(struct message_queue *mq); +int wilc_mq_send(struct message_queue *mq, + const void *send_buf, u32 send_buf_size); +int wilc_mq_recv(struct message_queue *mq, + void *recv_buf, u32 recv_buf_size, u32 *recv_len); +int wilc_mq_destroy(struct message_queue *mq); #endif diff --git a/drivers/staging/wilc1000/wilc_sdio.c b/drivers/staging/wilc1000/wilc_sdio.c index e961b50..7c20c8c 100644 --- a/drivers/staging/wilc1000/wilc_sdio.c +++ b/drivers/staging/wilc1000/wilc_sdio.c @@ -42,6 +42,7 @@ static wilc_sdio_t g_sdio; static int sdio_write_reg(struct wilc *wilc, u32 addr, u32 data); static int sdio_read_reg(struct wilc *wilc, u32 addr, u32 *data); +static int sdio_init(struct wilc *wilc, bool resume); static void wilc_sdio_interrupt(struct sdio_func *func) { @@ -142,11 +143,82 @@ static void linux_sdio_remove(struct sdio_func *func) wilc_netdev_cleanup(sdio_get_drvdata(func)); } +static int sdio_reset(struct wilc *wilc) +{ + sdio_cmd52_t cmd; + int ret; + struct sdio_func *func = dev_to_sdio_func(wilc->dev); + + cmd.read_write = 1; + cmd.function = 0; + cmd.raw = 0; + cmd.address = 0x6; + cmd.data = 0x8; + ret = wilc_sdio_cmd52(wilc, &cmd); + if (ret) { + dev_err(&func->dev, "Fail cmd 52, reset cmd ...\n"); + return ret; + } + return 0; +} + +static int wilc_sdio_suspend(struct device *dev) +{ + struct sdio_func *func = dev_to_sdio_func(dev); + struct wilc *wilc = sdio_get_drvdata(func); + int ret; + + dev_info(dev, "sdio suspend\n"); + chip_wakeup(wilc); + + if (!wilc->suspend_event) { + wilc_chip_sleep_manually(wilc); + } else { + host_sleep_notify(wilc); + chip_allow_sleep(wilc); + } + + ret = sdio_reset(wilc); + if (ret) { + dev_err(&func->dev, "Fail reset sdio\n"); + return ret; + } + sdio_claim_host(func); + + return 0; +} + +static int wilc_sdio_resume(struct device *dev) +{ + struct sdio_func *func = dev_to_sdio_func(dev); + struct wilc *wilc = sdio_get_drvdata(func); + + dev_info(dev, "sdio resume\n"); + sdio_release_host(func); + chip_wakeup(wilc); + sdio_init(wilc, true); + + if (wilc->suspend_event) + host_wakeup_notify(wilc); + + chip_allow_sleep(wilc); + + return 0; +} + +static const struct dev_pm_ops wilc_sdio_pm_ops = { + .suspend = wilc_sdio_suspend, + .resume = wilc_sdio_resume, +}; + static struct sdio_driver wilc1000_sdio_driver = { .name = SDIO_MODALIAS, .id_table = wilc_sdio_ids, .probe = linux_sdio_probe, .remove = linux_sdio_remove, + .drv = { + .pm = &wilc_sdio_pm_ops, + } }; module_driver(wilc1000_sdio_driver, sdio_register_driver, @@ -185,11 +257,6 @@ static void wilc_sdio_disable_interrupt(struct wilc *dev) dev_info(&func->dev, "wilc_sdio_disable_interrupt OUT\n"); } -static int wilc_sdio_init(void) -{ - return 1; -} - /******************************************** * * Function 0 @@ -600,22 +667,16 @@ static int sdio_deinit(struct wilc *wilc) return 1; } -static int sdio_init(struct wilc *wilc) +static int sdio_init(struct wilc *wilc, bool resume) { struct sdio_func *func = dev_to_sdio_func(wilc->dev); sdio_cmd52_t cmd; int loop, ret; u32 chipid; - memset(&g_sdio, 0, sizeof(wilc_sdio_t)); - - g_sdio.irq_gpio = (wilc->dev_irq_num); - - if (!wilc_sdio_init()) { - dev_err(&func->dev, "Failed io init bus...\n"); - return 0; - } else { - return 0; + if (!resume) { + memset(&g_sdio, 0, sizeof(wilc_sdio_t)); + g_sdio.irq_gpio = (wilc->dev_irq_num); } /** @@ -706,16 +767,19 @@ static int sdio_init(struct wilc *wilc) /** * make sure can read back chip id correctly **/ - if (!sdio_read_reg(wilc, 0x1000, &chipid)) { - dev_err(&func->dev, "Fail cmd read chip id...\n"); - goto _fail_; + if (!resume) { + if (!sdio_read_reg(wilc, 0x1000, &chipid)) { + dev_err(&func->dev, "Fail cmd read chip id...\n"); + goto _fail_; + } + dev_err(&func->dev, "chipid (%08x)\n", chipid); + if ((chipid & 0xfff) > 0x2a0) + g_sdio.has_thrpt_enh3 = 1; + else + g_sdio.has_thrpt_enh3 = 0; + dev_info(&func->dev, "has_thrpt_enh3 = %d...\n", + g_sdio.has_thrpt_enh3); } - dev_err(&func->dev, "chipid (%08x)\n", chipid); - if ((chipid & 0xfff) > 0x2a0) - g_sdio.has_thrpt_enh3 = 1; - else - g_sdio.has_thrpt_enh3 = 0; - dev_info(&func->dev, "has_thrpt_enh3 = %d...\n", g_sdio.has_thrpt_enh3); return 1; diff --git a/drivers/staging/wilc1000/wilc_spi.c b/drivers/staging/wilc1000/wilc_spi.c index 86de50c..2928712 100644 --- a/drivers/staging/wilc1000/wilc_spi.c +++ b/drivers/staging/wilc1000/wilc_spi.c @@ -120,8 +120,6 @@ static u8 crc7(u8 crc, const u8 *buffer, u32 len) #define USE_SPI_DMA 0 -static const struct wilc1000_ops wilc1000_spi_ops; - static int wilc_bus_probe(struct spi_device *spi) { int ret, gpio; @@ -153,7 +151,7 @@ static const struct of_device_id wilc1000_of_match[] = { }; MODULE_DEVICE_TABLE(of, wilc1000_of_match); -struct spi_driver wilc1000_spi_driver = { +static struct spi_driver wilc1000_spi_driver = { .driver = { .name = MODALIAS, .of_match_table = wilc1000_of_match, @@ -852,7 +850,7 @@ static int _wilc_spi_deinit(struct wilc *wilc) return 1; } -static int wilc_spi_init(struct wilc *wilc) +static int wilc_spi_init(struct wilc *wilc, bool resume) { struct spi_device *spi = to_spi_device(wilc->dev); u32 reg; diff --git a/drivers/staging/wilc1000/wilc_wfi_cfgoperations.c b/drivers/staging/wilc1000/wilc_wfi_cfgoperations.c index 53fb2d4..28a6ffa 100644 --- a/drivers/staging/wilc1000/wilc_wfi_cfgoperations.c +++ b/drivers/staging/wilc1000/wilc_wfi_cfgoperations.c @@ -74,6 +74,10 @@ static const struct ieee80211_txrx_stypes } }; +static const struct wiphy_wowlan_support wowlan_support = { + .flags = WIPHY_WOWLAN_ANY +}; + #define WILC_WFI_DWELL_PASSIVE 100 #define WILC_WFI_DWELL_ACTIVE 40 @@ -196,7 +200,7 @@ static void clear_shadow_scan(void) last_scanned_shadow[last_scanned_cnt].pu8IEs = NULL; } - wilc_free_join_params(last_scanned_shadow[i].pJoinParams); + kfree(last_scanned_shadow[i].pJoinParams); last_scanned_shadow[i].pJoinParams = NULL; } last_scanned_cnt = 0; @@ -282,7 +286,7 @@ static void remove_network_from_shadow(unsigned long arg) kfree(last_scanned_shadow[i].pu8IEs); last_scanned_shadow[i].pu8IEs = NULL; - wilc_free_join_params(last_scanned_shadow[i].pJoinParams); + kfree(last_scanned_shadow[i].pJoinParams); for (j = i; (j < last_scanned_cnt - 1); j++) last_scanned_shadow[j] = last_scanned_shadow[j + 1]; @@ -376,7 +380,7 @@ static void add_network_to_shadow(tstrNetworkInfo *pstrNetworkInfo, last_scanned_shadow[ap_index].u32TimeRcvdInScanCached = jiffies; last_scanned_shadow[ap_index].u8Found = 1; if (ap_found != -1) - wilc_free_join_params(last_scanned_shadow[ap_index].pJoinParams); + kfree(last_scanned_shadow[ap_index].pJoinParams); last_scanned_shadow[ap_index].pJoinParams = pJoinParams; } @@ -520,7 +524,8 @@ static void CfgConnectResult(enum conn_event enuConnDisconnEvent, if ((u8MacStatus == MAC_DISCONNECTED) && (pstrConnectInfo->u16ConnectStatus == SUCCESSFUL_STATUSCODE)) { u16ConnectStatus = WLAN_STATUS_UNSPECIFIED_FAILURE; - wilc_wlan_set_bssid(priv->dev, NullBssid); + wilc_wlan_set_bssid(priv->dev, NullBssid, + STATION_MODE); eth_zero_addr(wilc_connected_ssid); if (!pstrWFIDrv->p2p_connect) @@ -573,7 +578,7 @@ static void CfgConnectResult(enum conn_event enuConnDisconnEvent, p2p_recv_random = 0x00; wilc_ie = false; eth_zero_addr(priv->au8AssociatedBss); - wilc_wlan_set_bssid(priv->dev, NullBssid); + wilc_wlan_set_bssid(priv->dev, NullBssid, STATION_MODE); eth_zero_addr(wilc_connected_ssid); if (!pstrWFIDrv->p2p_connect) @@ -644,19 +649,19 @@ static int scan(struct wiphy *wiphy, struct cfg80211_scan_request *request) PRINT_D(CFG80211_DBG, "Number of SSIDs %d\n", request->n_ssids); if (request->n_ssids >= 1) { - strHiddenNetwork.pstrHiddenNetworkInfo = kmalloc(request->n_ssids * sizeof(struct hidden_network), GFP_KERNEL); - strHiddenNetwork.u8ssidnum = request->n_ssids; + strHiddenNetwork.net_info = kmalloc(request->n_ssids * sizeof(struct hidden_network), GFP_KERNEL); + strHiddenNetwork.n_ssids = request->n_ssids; for (i = 0; i < request->n_ssids; i++) { if (request->ssids[i].ssid && request->ssids[i].ssid_len != 0) { - strHiddenNetwork.pstrHiddenNetworkInfo[i].pu8ssid = kmalloc(request->ssids[i].ssid_len, GFP_KERNEL); - memcpy(strHiddenNetwork.pstrHiddenNetworkInfo[i].pu8ssid, request->ssids[i].ssid, request->ssids[i].ssid_len); - strHiddenNetwork.pstrHiddenNetworkInfo[i].u8ssidlen = request->ssids[i].ssid_len; + strHiddenNetwork.net_info[i].ssid = kmalloc(request->ssids[i].ssid_len, GFP_KERNEL); + memcpy(strHiddenNetwork.net_info[i].ssid, request->ssids[i].ssid, request->ssids[i].ssid_len); + strHiddenNetwork.net_info[i].ssid_len = request->ssids[i].ssid_len; } else { PRINT_D(CFG80211_DBG, "Received one NULL SSID\n"); - strHiddenNetwork.u8ssidnum -= 1; + strHiddenNetwork.n_ssids -= 1; } } PRINT_D(CFG80211_DBG, "Trigger Scan Request\n"); @@ -899,7 +904,7 @@ static int connect(struct wiphy *wiphy, struct net_device *dev, if (!pstrWFIDrv->p2p_connect) wlan_channel = pstrNetworkInfo->u8channel; - wilc_wlan_set_bssid(dev, pstrNetworkInfo->au8bssid); + wilc_wlan_set_bssid(dev, pstrNetworkInfo->au8bssid, STATION_MODE); s32Error = wilc_set_join_req(vif, pstrNetworkInfo->au8bssid, sme->ssid, sme->ssid_len, sme->ie, sme->ie_len, @@ -933,7 +938,7 @@ static int disconnect(struct wiphy *wiphy, struct net_device *dev, u16 reason_co pstrWFIDrv = (struct host_if_drv *)priv->hWILCWFIDrv; if (!pstrWFIDrv->p2p_connect) wlan_channel = INVALID_CHANNEL; - wilc_wlan_set_bssid(priv->dev, NullBssid); + wilc_wlan_set_bssid(priv->dev, NullBssid, STATION_MODE); PRINT_D(CFG80211_DBG, "Disconnecting with reason code(%d)\n", reason_code); @@ -1270,7 +1275,6 @@ static int del_key(struct wiphy *wiphy, struct net_device *netdev, kfree(g_key_gtk_params.seq); g_key_gtk_params.seq = NULL; - wilc_set_machw_change_vir_if(netdev, false); } if (key_index >= 0 && key_index <= 3) { @@ -2094,9 +2098,6 @@ static int change_virtual_intf(struct wiphy *wiphy, struct net_device *dev, { struct wilc_priv *priv; struct wilc_vif *vif; - u8 interface_type; - u16 TID = 0; - u8 i; struct wilc *wl; vif = netdev_priv(dev); @@ -2112,10 +2113,6 @@ static int change_virtual_intf(struct wiphy *wiphy, struct net_device *dev, del_timer(&wilc_during_ip_timer); PRINT_D(GENERIC_DBG, "Changing virtual interface, enable scan\n"); - if (g_ptk_keys_saved && g_gtk_keys_saved) { - wilc_set_machw_change_vir_if(dev, true); - } - switch (type) { case NL80211_IFTYPE_STATION: wilc_connecting = 0; @@ -2125,150 +2122,26 @@ static int change_virtual_intf(struct wiphy *wiphy, struct net_device *dev, priv->wdev->iftype = type; vif->monitor_flag = 0; vif->iftype = STATION_MODE; + wilc_set_operation_mode(vif, STATION_MODE); memset(priv->assoc_stainfo.au8Sta_AssociatedBss, 0, MAX_NUM_STA * ETH_ALEN); - interface_type = vif->iftype; - vif->iftype = STATION_MODE; - if (wl->initialized) { - wilc_del_all_rx_ba_session(vif, wl->vif[0]->bssid, - TID); - wilc_wait_msg_queue_idle(); - - up(&wl->cfg_event); - - wilc1000_wlan_deinit(dev); - wilc1000_wlan_init(dev, vif); - wilc_initialized = 1; - vif->iftype = interface_type; - - wilc_set_wfi_drv_handler(vif, - wilc_get_vif_idx(wl->vif[0])); - wilc_set_mac_address(wl->vif[0], wl->vif[0]->src_addr); - wilc_set_operation_mode(vif, STATION_MODE); - - if (g_wep_keys_saved) { - wilc_set_wep_default_keyid(wl->vif[0], - g_key_wep_params.key_idx); - wilc_add_wep_key_bss_sta(wl->vif[0], - g_key_wep_params.key, - g_key_wep_params.key_len, - g_key_wep_params.key_idx); - } - - wilc_flush_join_req(vif); - - if (g_ptk_keys_saved && g_gtk_keys_saved) { - PRINT_D(CFG80211_DBG, "ptk %x %x %x\n", g_key_ptk_params.key[0], - g_key_ptk_params.key[1], - g_key_ptk_params.key[2]); - PRINT_D(CFG80211_DBG, "gtk %x %x %x\n", g_key_gtk_params.key[0], - g_key_gtk_params.key[1], - g_key_gtk_params.key[2]); - add_key(wl->vif[0]->ndev->ieee80211_ptr->wiphy, - wl->vif[0]->ndev, - g_add_ptk_key_params.key_idx, - g_add_ptk_key_params.pairwise, - g_add_ptk_key_params.mac_addr, - (struct key_params *)(&g_key_ptk_params)); - - add_key(wl->vif[0]->ndev->ieee80211_ptr->wiphy, - wl->vif[0]->ndev, - g_add_gtk_key_params.key_idx, - g_add_gtk_key_params.pairwise, - g_add_gtk_key_params.mac_addr, - (struct key_params *)(&g_key_gtk_params)); - } - - if (wl->initialized) { - for (i = 0; i < num_reg_frame; i++) { - PRINT_D(INIT_DBG, "Frame registering Type: %x - Reg: %d\n", vif->g_struct_frame_reg[i].frame_type, - vif->g_struct_frame_reg[i].reg); - wilc_frame_register(vif, - vif->g_struct_frame_reg[i].frame_type, - vif->g_struct_frame_reg[i].reg); - } - } - - wilc_enable_ps = true; - wilc_set_power_mgmt(vif, 1, 0); - } + wilc_enable_ps = true; + wilc_set_power_mgmt(vif, 1, 0); break; case NL80211_IFTYPE_P2P_CLIENT: - wilc_enable_ps = false; - wilc_set_power_mgmt(vif, 0, 0); wilc_connecting = 0; PRINT_D(HOSTAPD_DBG, "Interface type = NL80211_IFTYPE_P2P_CLIENT\n"); - wilc_del_all_rx_ba_session(vif, wl->vif[0]->bssid, TID); - dev->ieee80211_ptr->iftype = type; priv->wdev->iftype = type; vif->monitor_flag = 0; - - PRINT_D(HOSTAPD_DBG, "Downloading P2P_CONCURRENCY_FIRMWARE\n"); vif->iftype = CLIENT_MODE; + wilc_set_operation_mode(vif, STATION_MODE); - - if (wl->initialized) { - wilc_wait_msg_queue_idle(); - - wilc1000_wlan_deinit(dev); - wilc1000_wlan_init(dev, vif); - wilc_initialized = 1; - - wilc_set_wfi_drv_handler(vif, - wilc_get_vif_idx(wl->vif[0])); - wilc_set_mac_address(wl->vif[0], wl->vif[0]->src_addr); - wilc_set_operation_mode(vif, STATION_MODE); - - if (g_wep_keys_saved) { - wilc_set_wep_default_keyid(wl->vif[0], - g_key_wep_params.key_idx); - wilc_add_wep_key_bss_sta(wl->vif[0], - g_key_wep_params.key, - g_key_wep_params.key_len, - g_key_wep_params.key_idx); - } - - wilc_flush_join_req(vif); - - if (g_ptk_keys_saved && g_gtk_keys_saved) { - PRINT_D(CFG80211_DBG, "ptk %x %x %x\n", g_key_ptk_params.key[0], - g_key_ptk_params.key[1], - g_key_ptk_params.key[2]); - PRINT_D(CFG80211_DBG, "gtk %x %x %x\n", g_key_gtk_params.key[0], - g_key_gtk_params.key[1], - g_key_gtk_params.key[2]); - add_key(wl->vif[0]->ndev->ieee80211_ptr->wiphy, - wl->vif[0]->ndev, - g_add_ptk_key_params.key_idx, - g_add_ptk_key_params.pairwise, - g_add_ptk_key_params.mac_addr, - (struct key_params *)(&g_key_ptk_params)); - - add_key(wl->vif[0]->ndev->ieee80211_ptr->wiphy, - wl->vif[0]->ndev, - g_add_gtk_key_params.key_idx, - g_add_gtk_key_params.pairwise, - g_add_gtk_key_params.mac_addr, - (struct key_params *)(&g_key_gtk_params)); - } - - refresh_scan(priv, 1, true); - wilc_set_machw_change_vir_if(dev, false); - - if (wl->initialized) { - for (i = 0; i < num_reg_frame; i++) { - PRINT_D(INIT_DBG, "Frame registering Type: %x - Reg: %d\n", vif->g_struct_frame_reg[i].frame_type, - vif->g_struct_frame_reg[i].reg); - wilc_frame_register(vif, - vif->g_struct_frame_reg[i].frame_type, - vif->g_struct_frame_reg[i].reg); - } - } - } + wilc_enable_ps = false; + wilc_set_power_mgmt(vif, 0, 0); break; case NL80211_IFTYPE_AP: @@ -2277,23 +2150,11 @@ static int change_virtual_intf(struct wiphy *wiphy, struct net_device *dev, dev->ieee80211_ptr->iftype = type; priv->wdev->iftype = type; vif->iftype = AP_MODE; - PRINT_D(CORECONFIG_DBG, "priv->hWILCWFIDrv[%p]\n", priv->hWILCWFIDrv); - - PRINT_D(HOSTAPD_DBG, "Downloading AP firmware\n"); - wilc_wlan_get_firmware(dev); - - if (wl->initialized) { - vif->iftype = AP_MODE; - wilc_mac_close(dev); - wilc_mac_open(dev); - - for (i = 0; i < num_reg_frame; i++) { - PRINT_D(INIT_DBG, "Frame registering Type: %x - Reg: %d\n", vif->g_struct_frame_reg[i].frame_type, - vif->g_struct_frame_reg[i].reg); - wilc_frame_register(vif, - vif->g_struct_frame_reg[i].frame_type, - vif->g_struct_frame_reg[i].reg); - } + + if (wl->initialized) { + wilc_set_wfi_drv_handler(vif, wilc_get_vif_idx(vif)); + wilc_set_operation_mode(vif, AP_MODE); + wilc_set_power_mgmt(vif, 0, 0); } break; @@ -2303,73 +2164,15 @@ static int change_virtual_intf(struct wiphy *wiphy, struct net_device *dev, wilc_optaining_ip = true; mod_timer(&wilc_during_ip_timer, jiffies + msecs_to_jiffies(during_ip_time)); - wilc_set_power_mgmt(vif, 0, 0); - wilc_del_all_rx_ba_session(vif, wl->vif[0]->bssid, TID); - wilc_enable_ps = false; PRINT_D(HOSTAPD_DBG, "Interface type = NL80211_IFTYPE_GO\n"); + + wilc_set_operation_mode(vif, AP_MODE); dev->ieee80211_ptr->iftype = type; priv->wdev->iftype = type; - - PRINT_D(CORECONFIG_DBG, "priv->hWILCWFIDrv[%p]\n", priv->hWILCWFIDrv); - - PRINT_D(HOSTAPD_DBG, "Downloading P2P_CONCURRENCY_FIRMWARE\n"); - - vif->iftype = GO_MODE; - wilc_wait_msg_queue_idle(); - wilc1000_wlan_deinit(dev); - wilc1000_wlan_init(dev, vif); - wilc_initialized = 1; - - wilc_set_wfi_drv_handler(vif, wilc_get_vif_idx(wl->vif[0])); - wilc_set_mac_address(wl->vif[0], wl->vif[0]->src_addr); - wilc_set_operation_mode(vif, AP_MODE); - - if (g_wep_keys_saved) { - wilc_set_wep_default_keyid(wl->vif[0], - g_key_wep_params.key_idx); - wilc_add_wep_key_bss_sta(wl->vif[0], - g_key_wep_params.key, - g_key_wep_params.key_len, - g_key_wep_params.key_idx); - } - - wilc_flush_join_req(vif); - - if (g_ptk_keys_saved && g_gtk_keys_saved) { - PRINT_D(CFG80211_DBG, "ptk %x %x %x cipher %x\n", g_key_ptk_params.key[0], - g_key_ptk_params.key[1], - g_key_ptk_params.key[2], - g_key_ptk_params.cipher); - PRINT_D(CFG80211_DBG, "gtk %x %x %x cipher %x\n", g_key_gtk_params.key[0], - g_key_gtk_params.key[1], - g_key_gtk_params.key[2], - g_key_gtk_params.cipher); - add_key(wl->vif[0]->ndev->ieee80211_ptr->wiphy, - wl->vif[0]->ndev, - g_add_ptk_key_params.key_idx, - g_add_ptk_key_params.pairwise, - g_add_ptk_key_params.mac_addr, - (struct key_params *)(&g_key_ptk_params)); - - add_key(wl->vif[0]->ndev->ieee80211_ptr->wiphy, - wl->vif[0]->ndev, - g_add_gtk_key_params.key_idx, - g_add_gtk_key_params.pairwise, - g_add_gtk_key_params.mac_addr, - (struct key_params *)(&g_key_gtk_params)); - } - - if (wl->initialized) { - for (i = 0; i < num_reg_frame; i++) { - PRINT_D(INIT_DBG, "Frame registering Type: %x - Reg: %d\n", vif->g_struct_frame_reg[i].frame_type, - vif->g_struct_frame_reg[i].reg); - wilc_frame_register(vif, - vif->g_struct_frame_reg[i].frame_type, - vif->g_struct_frame_reg[i].reg); - } - } + wilc_enable_ps = false; + wilc_set_power_mgmt(vif, 0, 0); break; default: @@ -2402,7 +2205,7 @@ static int start_ap(struct wiphy *wiphy, struct net_device *dev, if (s32Error != 0) PRINT_ER("Error in setting channel\n"); - wilc_wlan_set_bssid(dev, wl->vif[0]->src_addr); + wilc_wlan_set_bssid(dev, wl->vif[vif->u8IfIdx]->src_addr, AP_MODE); s32Error = wilc_add_beacon(vif, settings->beacon_interval, settings->dtim_period, beacon->head_len, @@ -2446,7 +2249,7 @@ static int stop_ap(struct wiphy *wiphy, struct net_device *dev) PRINT_D(HOSTAPD_DBG, "Deleting beacon\n"); - wilc_wlan_set_bssid(dev, NullBssid); + wilc_wlan_set_bssid(dev, NullBssid, AP_MODE); s32Error = wilc_del_beacon(vif); @@ -2673,6 +2476,36 @@ static int del_virtual_intf(struct wiphy *wiphy, struct wireless_dev *wdev) return 0; } +static int wilc_suspend(struct wiphy *wiphy, struct cfg80211_wowlan *wow) +{ + struct wilc_priv *priv = wiphy_priv(wiphy); + struct wilc_vif *vif = netdev_priv(priv->dev); + + if (!wow && wilc_wlan_get_num_conn_ifcs(vif->wilc)) + vif->wilc->suspend_event = true; + else + vif->wilc->suspend_event = false; + + return 0; +} + +static int wilc_resume(struct wiphy *wiphy) +{ + struct wilc_priv *priv = wiphy_priv(wiphy); + struct wilc_vif *vif = netdev_priv(priv->dev); + + netdev_info(vif->ndev, "cfg resume\n"); + return 0; +} + +static void wilc_set_wakeup(struct wiphy *wiphy, bool enabled) +{ + struct wilc_priv *priv = wiphy_priv(wiphy); + struct wilc_vif *vif = netdev_priv(priv->dev); + + netdev_info(vif->ndev, "cfg set wake up = %d\n", enabled); +} + static struct cfg80211_ops wilc_cfg80211_ops = { .set_monitor_channel = set_channel, .scan = scan, @@ -2708,6 +2541,10 @@ static struct cfg80211_ops wilc_cfg80211_ops = { .set_power_mgmt = set_power_mgmt, .set_cqm_rssi_config = set_cqm_rssi_config, + .suspend = wilc_suspend, + .resume = wilc_resume, + .set_wakeup = wilc_set_wakeup, + }; int WILC_WFI_update_stats(struct wiphy *wiphy, u32 pktlen, u8 changed) @@ -2792,6 +2629,9 @@ struct wireless_dev *wilc_create_wiphy(struct net_device *net, struct device *de sema_init(&(priv->SemHandleUpdateStats), 1); priv->wdev = wdev; wdev->wiphy->max_scan_ssids = MAX_NUM_PROBED_SSID; +#ifdef CONFIG_PM + wdev->wiphy->wowlan = &wowlan_support; +#endif wdev->wiphy->max_num_pmkids = WILC_MAX_NUM_PMKIDS; PRINT_INFO(CFG80211_DBG, "Max number of PMKIDs = %d\n", wdev->wiphy->max_num_pmkids); diff --git a/drivers/staging/wilc1000/wilc_wfi_netdevice.h b/drivers/staging/wilc1000/wilc_wfi_netdevice.h index 98ac8ed..54e762ec 100644 --- a/drivers/staging/wilc1000/wilc_wfi_netdevice.h +++ b/drivers/staging/wilc1000/wilc_wfi_netdevice.h @@ -160,6 +160,7 @@ struct wilc_vif { u8 bssid[ETH_ALEN]; struct host_if_drv *hif_drv; struct net_device *ndev; + u8 mode; }; struct wilc { @@ -215,6 +216,7 @@ struct wilc { const struct firmware *firmware; struct device *dev; + bool suspend_event; }; struct WILC_WFI_mon_priv { @@ -234,8 +236,7 @@ int wilc_netdev_init(struct wilc **wilc, struct device *, int io_type, int gpio, const struct wilc_hif_func *ops); void wilc1000_wlan_deinit(struct net_device *dev); void WILC_WFI_mgmt_rx(struct wilc *wilc, u8 *buff, u32 size); -u16 wilc_set_machw_change_vir_if(struct net_device *dev, bool value); int wilc_wlan_get_firmware(struct net_device *dev); -int wilc_wlan_set_bssid(struct net_device *wilc_netdev, u8 *bssid); +int wilc_wlan_set_bssid(struct net_device *wilc_netdev, u8 *bssid, u8 mode); #endif diff --git a/drivers/staging/wilc1000/wilc_wlan.c b/drivers/staging/wilc1000/wilc_wlan.c index 83af51b..5682581 100644 --- a/drivers/staging/wilc1000/wilc_wlan.c +++ b/drivers/staging/wilc1000/wilc_wlan.c @@ -3,10 +3,6 @@ #include "wilc_wfi_netdevice.h" #include "wilc_wlan_cfg.h" -#ifdef WILC_OPTIMIZE_SLEEP_INT -static inline void chip_allow_sleep(struct wilc *wilc); -#endif -static inline void chip_wakeup(struct wilc *wilc); static u32 dbgflag = N_INIT | N_ERR | N_INTR | N_TXQ | N_RXQ; /* FIXME: replace with dev_debug() */ @@ -29,21 +25,14 @@ static CHIP_PS_STATE_T chip_ps_state = CHIP_WAKEDUP; static inline void acquire_bus(struct wilc *wilc, BUS_ACQUIRE_T acquire) { mutex_lock(&wilc->hif_cs); - #ifndef WILC_OPTIMIZE_SLEEP_INT - if (chip_ps_state != CHIP_WAKEDUP) - #endif - { - if (acquire == ACQUIRE_AND_WAKEUP) - chip_wakeup(wilc); - } + if (acquire == ACQUIRE_AND_WAKEUP) + chip_wakeup(wilc); } static inline void release_bus(struct wilc *wilc, BUS_RELEASE_T release) { - #ifdef WILC_OPTIMIZE_SLEEP_INT if (release == RELEASE_ALLOW_SLEEP) chip_allow_sleep(wilc); - #endif mutex_unlock(&wilc->hif_cs); } @@ -248,7 +237,7 @@ static inline int tcp_process(struct net_device *dev, struct txq_entry_t *tqe) eth_hdr_ptr = &buffer[0]; h_proto = ntohs(*((unsigned short *)ð_hdr_ptr[12])); - if (h_proto == 0x0800) { + if (h_proto == ETH_P_IP) { u8 *ip_hdr_ptr; u8 protocol; @@ -524,21 +513,20 @@ static struct rxq_entry_t *wilc_wlan_rxq_remove(struct wilc *wilc) return NULL; } -#ifdef WILC_OPTIMIZE_SLEEP_INT - -static inline void chip_allow_sleep(struct wilc *wilc) +void chip_allow_sleep(struct wilc *wilc) { u32 reg = 0; wilc->hif_func->hif_read_reg(wilc, 0xf0, ®); wilc->hif_func->hif_write_reg(wilc, 0xf0, reg & ~BIT(0)); + wilc->hif_func->hif_write_reg(wilc, 0xfa, 0); } +EXPORT_SYMBOL_GPL(chip_allow_sleep); -static inline void chip_wakeup(struct wilc *wilc) +void chip_wakeup(struct wilc *wilc) { u32 reg, clk_status_reg, trials = 0; - u32 sleep_time; if ((wilc->io_type & 0x1) == HIF_SPI) { do { @@ -555,6 +543,8 @@ static inline void chip_wakeup(struct wilc *wilc) } while (wilc_get_chipid(wilc, true) == 0); } else if ((wilc->io_type & 0x1) == HIF_SDIO) { + wilc->hif_func->hif_write_reg(wilc, 0xfa, 1); + udelay(200); wilc->hif_func->hif_read_reg(wilc, 0xf0, ®); do { wilc->hif_func->hif_write_reg(wilc, 0xf0, @@ -579,11 +569,7 @@ static inline void chip_wakeup(struct wilc *wilc) } if (chip_ps_state == CHIP_SLEEPING_MANUAL) { - wilc->hif_func->hif_read_reg(wilc, 0x1C0C, ®); - reg &= ~BIT(0); - wilc->hif_func->hif_write_reg(wilc, 0x1C0C, reg); - - if (wilc_get_chipid(wilc, false) >= 0x1002b0) { + if (wilc_get_chipid(wilc, false) < 0x1002b0) { u32 val32; wilc->hif_func->hif_read_reg(wilc, 0x1e1c, &val32); @@ -597,71 +583,37 @@ static inline void chip_wakeup(struct wilc *wilc) } chip_ps_state = CHIP_WAKEDUP; } -#else -static inline void chip_wakeup(struct wilc *wilc) -{ - u32 reg, trials = 0; - - do { - if ((wilc->io_type & 0x1) == HIF_SPI) { - wilc->hif_func->hif_read_reg(wilc, 1, ®); - wilc->hif_func->hif_write_reg(wilc, 1, reg & ~BIT(1)); - wilc->hif_func->hif_write_reg(wilc, 1, reg | BIT(1)); - wilc->hif_func->hif_write_reg(wilc, 1, reg & ~BIT(1)); - } else if ((wilc->io_type & 0x1) == HIF_SDIO) { - wilc->hif_func->hif_read_reg(wilc, 0xf0, ®); - wilc->hif_func->hif_write_reg(wilc, 0xf0, - reg & ~BIT(0)); - wilc->hif_func->hif_write_reg(wilc, 0xf0, - reg | BIT(0)); - wilc->hif_func->hif_write_reg(wilc, 0xf0, - reg & ~BIT(0)); - } - - do { - mdelay(3); - - if ((wilc_get_chipid(wilc, true) == 0)) - wilc_debug(N_ERR, "Couldn't read chip id. Wake up failed\n"); - - } while ((wilc_get_chipid(wilc, true) == 0) && ((++trials % 3) == 0)); - - } while (wilc_get_chipid(wilc, true) == 0); - - if (chip_ps_state == CHIP_SLEEPING_MANUAL) { - wilc->hif_func->hif_read_reg(wilc, 0x1C0C, ®); - reg &= ~BIT(0); - wilc->hif_func->hif_write_reg(wilc, 0x1C0C, reg); - - if (wilc_get_chipid(wilc, false) >= 0x1002b0) { - u32 val32; - - wilc->hif_func->hif_read_reg(wilc, 0x1e1c, &val32); - val32 |= BIT(6); - wilc->hif_func->hif_write_reg(wilc, 0x1e1c, val32); +EXPORT_SYMBOL_GPL(chip_wakeup); - wilc->hif_func->hif_read_reg(wilc, 0x1e9c, &val32); - val32 |= BIT(6); - wilc->hif_func->hif_write_reg(wilc, 0x1e9c, val32); - } - } - chip_ps_state = CHIP_WAKEDUP; -} -#endif void wilc_chip_sleep_manually(struct wilc *wilc) { if (chip_ps_state != CHIP_WAKEDUP) return; acquire_bus(wilc, ACQUIRE_ONLY); -#ifdef WILC_OPTIMIZE_SLEEP_INT chip_allow_sleep(wilc); -#endif wilc->hif_func->hif_write_reg(wilc, 0x10a8, 1); chip_ps_state = CHIP_SLEEPING_MANUAL; release_bus(wilc, RELEASE_ONLY); } +EXPORT_SYMBOL_GPL(wilc_chip_sleep_manually); + +void host_wakeup_notify(struct wilc *wilc) +{ + acquire_bus(wilc, ACQUIRE_ONLY); + wilc->hif_func->hif_write_reg(wilc, 0x10b0, 1); + release_bus(wilc, RELEASE_ONLY); +} +EXPORT_SYMBOL_GPL(host_wakeup_notify); + +void host_sleep_notify(struct wilc *wilc) +{ + acquire_bus(wilc, ACQUIRE_ONLY); + wilc->hif_func->hif_write_reg(wilc, 0x10ac, 1); + release_bus(wilc, RELEASE_ONLY); +} +EXPORT_SYMBOL_GPL(host_sleep_notify); int wilc_wlan_handle_txq(struct net_device *dev, u32 *txq_count) { @@ -765,9 +717,6 @@ int wilc_wlan_handle_txq(struct net_device *dev, u32 *txq_count) break; } PRINT_WRN(GENERIC_DBG, "[wilc txq]: warn, vmm table not clear yet, wait...\n"); - release_bus(wilc, RELEASE_ALLOW_SLEEP); - usleep_range(3000, 3000); - acquire_bus(wilc, ACQUIRE_AND_WAKEUP); } } while (!wilc->quit); @@ -800,9 +749,6 @@ int wilc_wlan_handle_txq(struct net_device *dev, u32 *txq_count) break; } else { release_bus(wilc, RELEASE_ALLOW_SLEEP); - usleep_range(3000, 3000); - acquire_bus(wilc, ACQUIRE_AND_WAKEUP); - PRINT_WRN(GENERIC_DBG, "Can't get VMM entery - reg = %2x\n", reg); } } while (--timeout); if (timeout <= 0) { @@ -1041,9 +987,6 @@ static void wilc_pllupdate_isr_ext(struct wilc *wilc, u32 int_stats) static void wilc_sleeptimer_isr_ext(struct wilc *wilc, u32 int_stats1) { wilc->hif_func->hif_clear_int_ext(wilc, SLEEP_INT_CLR); -#ifndef WILC_OPTIMIZE_SLEEP_INT - chip_ps_state = CHIP_SLEEPING_AUTO; -#endif } static void wilc_wlan_handle_isr_ext(struct wilc *wilc, u32 int_status) @@ -1113,9 +1056,6 @@ void wilc_handle_isr(struct wilc *wilc) if (int_status & DATA_INT_EXT) { wilc_wlan_handle_isr_ext(wilc, int_status); - #ifndef WILC_OPTIMIZE_SLEEP_INT - chip_ps_state = CHIP_WAKEDUP; - #endif } if (int_status & SLEEP_INT_EXT) wilc_sleeptimer_isr_ext(wilc, int_status); @@ -1226,7 +1166,7 @@ int wilc_wlan_start(struct wilc *wilc) #ifdef WILC_EXT_PA_INV_TX_RX reg |= WILC_HAVE_EXT_PA_INV_TX_RX; #endif - + reg |= WILC_HAVE_USE_IRQ_AS_HOST_WAKE; reg |= WILC_HAVE_LEGACY_RF_SETTINGS; #ifdef XTAL_24 reg |= WILC_HAVE_XTAL_24; @@ -1588,7 +1528,9 @@ int wilc_wlan_init(struct net_device *dev) PRINT_D(INIT_DBG, "Initializing WILC_Wlan ...\n"); - if (!wilc->hif_func->hif_init(wilc)) { + wilc->quit = 0; + + if (!wilc->hif_func->hif_init(wilc, false)) { ret = -EIO; goto _fail_; } @@ -1636,35 +1578,3 @@ _fail_: return ret; } - -u16 wilc_set_machw_change_vir_if(struct net_device *dev, bool value) -{ - u16 ret; - u32 reg; - struct wilc_vif *vif; - struct wilc *wilc; - - vif = netdev_priv(dev); - wilc = vif->wilc; - - mutex_lock(&wilc->hif_cs); - ret = wilc->hif_func->hif_read_reg(wilc, WILC_CHANGING_VIR_IF, - ®); - if (!ret) - PRINT_ER("Error while Reading reg WILC_CHANGING_VIR_IF\n"); - - if (value) - reg |= BIT(31); - else - reg &= ~BIT(31); - - ret = wilc->hif_func->hif_write_reg(wilc, WILC_CHANGING_VIR_IF, - reg); - - if (!ret) - PRINT_ER("Error while writing reg WILC_CHANGING_VIR_IF\n"); - - mutex_unlock(&wilc->hif_cs); - - return ret; -} diff --git a/drivers/staging/wilc1000/wilc_wlan.h b/drivers/staging/wilc1000/wilc_wlan.h index 2edd744..7f04653 100644 --- a/drivers/staging/wilc1000/wilc_wlan.h +++ b/drivers/staging/wilc1000/wilc_wlan.h @@ -106,6 +106,7 @@ #define WILC_HAVE_LEGACY_RF_SETTINGS BIT(5) #define WILC_HAVE_XTAL_24 BIT(6) #define WILC_HAVE_DISABLE_WILC_UART BIT(7) +#define WILC_HAVE_USE_IRQ_AS_HOST_WAKE BIT(8) /******************************************** * @@ -226,7 +227,7 @@ struct rxq_entry_t { ********************************************/ struct wilc; struct wilc_hif_func { - int (*hif_init)(struct wilc *); + int (*hif_init)(struct wilc *, bool resume); int (*hif_deinit)(struct wilc *); int (*hif_read_reg)(struct wilc *, u32, u32 *); int (*hif_write_reg)(struct wilc *, u32, u32); @@ -292,9 +293,10 @@ int wilc_mac_xmit(struct sk_buff *skb, struct net_device *dev); int wilc_mac_open(struct net_device *ndev); int wilc_mac_close(struct net_device *ndev); -int wilc_wlan_set_bssid(struct net_device *wilc_netdev, u8 *pBSSID); void WILC_WFI_p2p_rx(struct net_device *dev, u8 *buff, u32 size); - +void host_wakeup_notify(struct wilc *wilc); +void host_sleep_notify(struct wilc *wilc); extern bool wilc_enable_ps; - +void chip_allow_sleep(struct wilc *wilc); +void chip_wakeup(struct wilc *wilc); #endif diff --git a/include/linux/iio/common/st_sensors.h b/include/linux/iio/common/st_sensors.h index 2fe939c..6670c3d 100644 --- a/include/linux/iio/common/st_sensors.h +++ b/include/linux/iio/common/st_sensors.h @@ -119,6 +119,8 @@ struct st_sensor_bdu { * @addr: address of the register. * @mask_int1: mask to enable/disable IRQ on INT1 pin. * @mask_int2: mask to enable/disable IRQ on INT2 pin. + * @addr_ihl: address to enable/disable active low on the INT lines. + * @mask_ihl: mask to enable/disable active low on the INT lines. * struct ig1 - represents the Interrupt Generator 1 of sensors. * @en_addr: address of the enable ig1 register. * @en_mask: mask to write the on/off value for enable. @@ -127,6 +129,8 @@ struct st_sensor_data_ready_irq { u8 addr; u8 mask_int1; u8 mask_int2; + u8 addr_ihl; + u8 mask_ihl; struct { u8 en_addr; u8 en_mask; diff --git a/include/linux/platform_data/ad5761.h b/include/linux/platform_data/ad5761.h new file mode 100644 index 0000000..7bd8ed7 --- /dev/null +++ b/include/linux/platform_data/ad5761.h @@ -0,0 +1,44 @@ +/* + * AD5721, AD5721R, AD5761, AD5761R, Voltage Output Digital to Analog Converter + * + * Copyright 2016 Qtechnology A/S + * 2016 Ricardo Ribalda <ricardo.ribalda@gmail.com> + * + * Licensed under the GPL-2. + */ +#ifndef __LINUX_PLATFORM_DATA_AD5761_H__ +#define __LINUX_PLATFORM_DATA_AD5761_H__ + +/** + * enum ad5761_voltage_range - Voltage range the AD5761 is configured for. + * @AD5761_VOLTAGE_RANGE_M10V_10V: -10V to 10V + * @AD5761_VOLTAGE_RANGE_0V_10V: 0V to 10V + * @AD5761_VOLTAGE_RANGE_M5V_5V: -5V to 5V + * @AD5761_VOLTAGE_RANGE_0V_5V: 0V to 5V + * @AD5761_VOLTAGE_RANGE_M2V5_7V5: -2.5V to 7.5V + * @AD5761_VOLTAGE_RANGE_M3V_3V: -3V to 3V + * @AD5761_VOLTAGE_RANGE_0V_16V: 0V to 16V + * @AD5761_VOLTAGE_RANGE_0V_20V: 0V to 20V + */ + +enum ad5761_voltage_range { + AD5761_VOLTAGE_RANGE_M10V_10V, + AD5761_VOLTAGE_RANGE_0V_10V, + AD5761_VOLTAGE_RANGE_M5V_5V, + AD5761_VOLTAGE_RANGE_0V_5V, + AD5761_VOLTAGE_RANGE_M2V5_7V5, + AD5761_VOLTAGE_RANGE_M3V_3V, + AD5761_VOLTAGE_RANGE_0V_16V, + AD5761_VOLTAGE_RANGE_0V_20V, +}; + +/** + * struct ad5761_platform_data - AD5761 DAC driver platform data + * @voltage_range: Voltage range the AD5761 is configured for + */ + +struct ad5761_platform_data { + enum ad5761_voltage_range voltage_range; +}; + +#endif diff --git a/include/uapi/linux/iio/types.h b/include/uapi/linux/iio/types.h index 7c63bd6..c077617 100644 --- a/include/uapi/linux/iio/types.h +++ b/include/uapi/linux/iio/types.h @@ -37,6 +37,7 @@ enum iio_chan_type { IIO_VELOCITY, IIO_CONCENTRATION, IIO_RESISTANCE, + IIO_PH, }; enum iio_modifier { |