diff options
| -rw-r--r-- | include/uapi/sound/asound.h | 3 | ||||
| -rw-r--r-- | sound/usb/line6/driver.c | 152 | ||||
| -rw-r--r-- | sound/usb/line6/driver.h | 23 |
3 files changed, 171 insertions, 7 deletions
diff --git a/include/uapi/sound/asound.h b/include/uapi/sound/asound.h index 609cadb..be353a7 100644 --- a/include/uapi/sound/asound.h +++ b/include/uapi/sound/asound.h @@ -106,9 +106,10 @@ enum { SNDRV_HWDEP_IFACE_FW_OXFW, /* Oxford OXFW970/971 based device */ SNDRV_HWDEP_IFACE_FW_DIGI00X, /* Digidesign Digi 002/003 family */ SNDRV_HWDEP_IFACE_FW_TASCAM, /* TASCAM FireWire series */ + SNDRV_HWDEP_IFACE_LINE6, /* Line6 USB processors */ /* Don't forget to change the following: */ - SNDRV_HWDEP_IFACE_LAST = SNDRV_HWDEP_IFACE_FW_TASCAM + SNDRV_HWDEP_IFACE_LAST = SNDRV_HWDEP_IFACE_LINE6 }; struct snd_hwdep_info { diff --git a/sound/usb/line6/driver.c b/sound/usb/line6/driver.c index 8a71d45..f9224ec 100644 --- a/sound/usb/line6/driver.c +++ b/sound/usb/line6/driver.c @@ -17,6 +17,7 @@ #include <sound/core.h> #include <sound/initval.h> +#include <sound/hwdep.h> #include "capture.h" #include "driver.h" @@ -303,7 +304,7 @@ static void line6_data_received(struct urb *urb) for (;;) { done = line6_midibuf_read(mb, line6->buffer_message, - LINE6_MESSAGE_MAXLEN); + LINE6_MIDI_MESSAGE_MAXLEN); if (done == 0) break; @@ -315,8 +316,11 @@ static void line6_data_received(struct urb *urb) line6->process_message(line6); } } else { + line6->buffer_message = urb->transfer_buffer; + line6->message_length = urb->actual_length; if (line6->process_message) line6->process_message(line6); + line6->buffer_message = NULL; } line6_start_listen(line6); @@ -473,14 +477,17 @@ static void line6_destruct(struct snd_card *card) struct usb_line6 *line6 = card->private_data; struct usb_device *usbdev = line6->usbdev; - /* free buffer memory first: */ - if (line6->properties->capabilities & LINE6_CAP_CONTROL_MIDI) + /* Free buffer memory first. We cannot depend on the existence of private + * data from the (podhd) module, it may be gone already during this call + */ + if (line6->buffer_message) kfree(line6->buffer_message); kfree(line6->buffer_listen); /* then free URBs: */ usb_free_urb(line6->urb_listen); + line6->urb_listen = NULL; /* decrement reference counters: */ usb_put_dev(usbdev); @@ -522,6 +529,138 @@ static void line6_get_interval(struct usb_line6 *line6) } } + +/* Enable buffering of incoming messages, flush the buffer */ +static int line6_hwdep_open(struct snd_hwdep *hw, struct file *file) +{ + struct usb_line6 *line6 = hw->private_data; + + /* NOTE: hwdep layer provides atomicity here */ + + line6->messages.active = 1; + + return 0; +} + +/* Stop buffering */ +static int line6_hwdep_release(struct snd_hwdep *hw, struct file *file) +{ + struct usb_line6 *line6 = hw->private_data; + + line6->messages.active = 0; + + return 0; +} + +/* Read from circular buffer, return to user */ +static long +line6_hwdep_read(struct snd_hwdep *hwdep, char __user *buf, long count, + loff_t *offset) +{ + struct usb_line6 *line6 = hwdep->private_data; + long rv = 0; + unsigned int out_count; + + if (mutex_lock_interruptible(&line6->messages.read_lock)) + return -ERESTARTSYS; + + while (kfifo_len(&line6->messages.fifo) == 0) { + mutex_unlock(&line6->messages.read_lock); + + rv = wait_event_interruptible( + line6->messages.wait_queue, + kfifo_len(&line6->messages.fifo) != 0); + if (rv < 0) + return rv; + + if (mutex_lock_interruptible(&line6->messages.read_lock)) + return -ERESTARTSYS; + } + + if (kfifo_peek_len(&line6->messages.fifo) > count) { + /* Buffer too small; allow re-read of the current item... */ + rv = -EINVAL; + } else { + rv = kfifo_to_user(&line6->messages.fifo, buf, count, &out_count); + if (rv == 0) + rv = out_count; + } + + mutex_unlock(&line6->messages.read_lock); + return rv; +} + +/* Write directly (no buffering) to device by user*/ +static long +line6_hwdep_write(struct snd_hwdep *hwdep, const char __user *data, long count, + loff_t *offset) +{ + struct usb_line6 *line6 = hwdep->private_data; + int rv; + char *data_copy; + + if (count > line6->max_packet_size * LINE6_RAW_MESSAGES_MAXCOUNT) { + /* This is an arbitrary limit - still better than nothing... */ + return -EINVAL; + } + + data_copy = memdup_user(data, count); + if (IS_ERR(ERR_PTR)) + return -ENOMEM; + + rv = line6_send_raw_message(line6, data_copy, count); + + kfree(data_copy); + return rv; +} + +static const struct snd_hwdep_ops hwdep_ops = { + .open = line6_hwdep_open, + .release = line6_hwdep_release, + .read = line6_hwdep_read, + .write = line6_hwdep_write, +}; + +/* Insert into circular buffer */ +static void line6_hwdep_push_message(struct usb_line6 *line6) +{ + if (!line6->messages.active) + return; + + if (kfifo_avail(&line6->messages.fifo) >= line6->message_length) { + /* No race condition here, there's only one writer */ + kfifo_in(&line6->messages.fifo, + line6->buffer_message, line6->message_length); + } /* else TODO: signal overflow */ + + wake_up_interruptible(&line6->messages.wait_queue); +} + +static int line6_hwdep_init(struct usb_line6 *line6) +{ + int err; + struct snd_hwdep *hwdep; + + /* TODO: usb_driver_claim_interface(); */ + line6->process_message = line6_hwdep_push_message; + line6->messages.active = 0; + init_waitqueue_head(&line6->messages.wait_queue); + mutex_init(&line6->messages.read_lock); + INIT_KFIFO(line6->messages.fifo); + + err = snd_hwdep_new(line6->card, "config", 0, &hwdep); + if (err < 0) + goto end; + strcpy(hwdep->name, "config"); + hwdep->iface = SNDRV_HWDEP_IFACE_LINE6; + hwdep->ops = hwdep_ops; + hwdep->private_data = line6; + hwdep->exclusive = true; + +end: + return err; +} + static int line6_init_cap_control(struct usb_line6 *line6) { int ret; @@ -536,9 +675,13 @@ static int line6_init_cap_control(struct usb_line6 *line6) return -ENOMEM; if (line6->properties->capabilities & LINE6_CAP_CONTROL_MIDI) { - line6->buffer_message = kmalloc(LINE6_MESSAGE_MAXLEN, GFP_KERNEL); + line6->buffer_message = kmalloc(LINE6_MIDI_MESSAGE_MAXLEN, GFP_KERNEL); if (!line6->buffer_message) return -ENOMEM; + } else { + ret = line6_hwdep_init(line6); + if (ret < 0) + return ret; } ret = line6_start_listen(line6); @@ -716,3 +859,4 @@ EXPORT_SYMBOL_GPL(line6_resume); MODULE_AUTHOR(DRIVER_AUTHOR); MODULE_DESCRIPTION(DRIVER_DESC); MODULE_LICENSE("GPL"); + diff --git a/sound/usb/line6/driver.h b/sound/usb/line6/driver.h index 88cf1e7..7e3a3aa 100644 --- a/sound/usb/line6/driver.h +++ b/sound/usb/line6/driver.h @@ -12,8 +12,9 @@ #ifndef DRIVER_H #define DRIVER_H -#include <linux/spinlock.h> #include <linux/usb.h> +#include <linux/mutex.h> +#include <linux/kfifo.h> #include <sound/core.h> #include "midi.h" @@ -32,7 +33,16 @@ #define LINE6_TIMEOUT 1 #define LINE6_BUFSIZE_LISTEN 64 -#define LINE6_MESSAGE_MAXLEN 256 +#define LINE6_MIDI_MESSAGE_MAXLEN 256 + +#define LINE6_RAW_MESSAGES_MAXCOUNT_ORDER 7 +/* 4k packets are common, BUFSIZE * MAXCOUNT should be bigger... */ +#define LINE6_RAW_MESSAGES_MAXCOUNT (1 << LINE6_RAW_MESSAGES_MAXCOUNT_ORDER) + + +#if LINE6_BUFSIZE_LISTEN > 65535 +#error "Use dynamic fifo instead" +#endif /* Line 6 MIDI control commands @@ -156,6 +166,15 @@ struct usb_line6 { /* Length of message to be processed, generated from MIDI layer */ int message_length; + /* Circular buffer for non-MIDI control messages */ + struct { + struct mutex read_lock; + wait_queue_head_t wait_queue; + unsigned int active:1; + STRUCT_KFIFO_REC_2(LINE6_BUFSIZE_LISTEN * LINE6_RAW_MESSAGES_MAXCOUNT) + fifo; + } messages; + /* If MIDI is supported, buffer_message contains the pre-processed data; * otherwise the data is only in urb_listen (buffer_incoming). */ |