summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--drivers/net/sfc/ethtool.c3
-rw-r--r--drivers/net/sfc/mdio_10g.c177
-rw-r--r--drivers/net/sfc/mdio_10g.h3
-rw-r--r--drivers/net/sfc/net_driver.h4
-rw-r--r--drivers/net/sfc/tenxpress.c151
-rw-r--r--drivers/net/sfc/workarounds.h4
6 files changed, 141 insertions, 201 deletions
diff --git a/drivers/net/sfc/ethtool.c b/drivers/net/sfc/ethtool.c
index 53d259e..7b5924c0 100644
--- a/drivers/net/sfc/ethtool.c
+++ b/drivers/net/sfc/ethtool.c
@@ -219,9 +219,6 @@ int efx_ethtool_set_settings(struct net_device *net_dev,
struct efx_nic *efx = netdev_priv(net_dev);
int rc;
- if (EFX_WORKAROUND_13963(efx) && !ecmd->autoneg)
- return -EINVAL;
-
/* Falcon GMAC does not support 1000Mbps HD */
if (ecmd->speed == SPEED_1000 && ecmd->duplex != DUPLEX_FULL) {
EFX_LOG(efx, "rejecting unsupported 1000Mbps HD"
diff --git a/drivers/net/sfc/mdio_10g.c b/drivers/net/sfc/mdio_10g.c
index 16bc585..f9e2f95 100644
--- a/drivers/net/sfc/mdio_10g.c
+++ b/drivers/net/sfc/mdio_10g.c
@@ -266,7 +266,7 @@ void mdio_clause45_set_mmds_lpower(struct efx_nic *efx,
}
}
-static u32 mdio_clause45_get_an(struct efx_nic *efx, u16 addr, u32 xnp)
+static u32 mdio_clause45_get_an(struct efx_nic *efx, u16 addr)
{
int phy_id = efx->mii.phy_id;
u32 result = 0;
@@ -281,9 +281,6 @@ static u32 mdio_clause45_get_an(struct efx_nic *efx, u16 addr, u32 xnp)
result |= ADVERTISED_100baseT_Half;
if (reg & ADVERTISE_100FULL)
result |= ADVERTISED_100baseT_Full;
- if (reg & LPA_RESV)
- result |= xnp;
-
return result;
}
@@ -313,7 +310,7 @@ void mdio_clause45_get_settings(struct efx_nic *efx,
*/
void mdio_clause45_get_settings_ext(struct efx_nic *efx,
struct ethtool_cmd *ecmd,
- u32 xnp, u32 xnp_lpa)
+ u32 npage_adv, u32 npage_lpa)
{
int phy_id = efx->mii.phy_id;
int reg;
@@ -364,8 +361,8 @@ void mdio_clause45_get_settings_ext(struct efx_nic *efx,
ecmd->autoneg = AUTONEG_ENABLE;
ecmd->advertising |=
ADVERTISED_Autoneg |
- mdio_clause45_get_an(efx,
- MDIO_AN_ADVERTISE, xnp);
+ mdio_clause45_get_an(efx, MDIO_AN_ADVERTISE) |
+ npage_adv;
} else
ecmd->autoneg = AUTONEG_DISABLE;
} else
@@ -374,27 +371,30 @@ void mdio_clause45_get_settings_ext(struct efx_nic *efx,
if (ecmd->autoneg) {
/* If AN is complete, report best common mode,
* otherwise report best advertised mode. */
- u32 common = ecmd->advertising;
+ u32 modes = 0;
if (mdio_clause45_read(efx, phy_id, MDIO_MMD_AN,
MDIO_MMDREG_STAT1) &
- (1 << MDIO_AN_STATUS_AN_DONE_LBN)) {
- common &= mdio_clause45_get_an(efx, MDIO_AN_LPA,
- xnp_lpa);
- }
- if (common & ADVERTISED_10000baseT_Full) {
+ (1 << MDIO_AN_STATUS_AN_DONE_LBN))
+ modes = (ecmd->advertising &
+ (mdio_clause45_get_an(efx, MDIO_AN_LPA) |
+ npage_lpa));
+ if (modes == 0)
+ modes = ecmd->advertising;
+
+ if (modes & ADVERTISED_10000baseT_Full) {
ecmd->speed = SPEED_10000;
ecmd->duplex = DUPLEX_FULL;
- } else if (common & (ADVERTISED_1000baseT_Full |
- ADVERTISED_1000baseT_Half)) {
+ } else if (modes & (ADVERTISED_1000baseT_Full |
+ ADVERTISED_1000baseT_Half)) {
ecmd->speed = SPEED_1000;
- ecmd->duplex = !!(common & ADVERTISED_1000baseT_Full);
- } else if (common & (ADVERTISED_100baseT_Full |
- ADVERTISED_100baseT_Half)) {
+ ecmd->duplex = !!(modes & ADVERTISED_1000baseT_Full);
+ } else if (modes & (ADVERTISED_100baseT_Full |
+ ADVERTISED_100baseT_Half)) {
ecmd->speed = SPEED_100;
- ecmd->duplex = !!(common & ADVERTISED_100baseT_Full);
+ ecmd->duplex = !!(modes & ADVERTISED_100baseT_Full);
} else {
ecmd->speed = SPEED_10;
- ecmd->duplex = !!(common & ADVERTISED_10baseT_Full);
+ ecmd->duplex = !!(modes & ADVERTISED_10baseT_Full);
}
} else {
/* Report forced settings */
@@ -418,7 +418,7 @@ int mdio_clause45_set_settings(struct efx_nic *efx,
int phy_id = efx->mii.phy_id;
struct ethtool_cmd prev;
u32 required;
- int ctrl1_bits, reg;
+ int reg;
efx->phy_op->get_settings(efx, &prev);
@@ -433,102 +433,83 @@ int mdio_clause45_set_settings(struct efx_nic *efx,
if (prev.port != PORT_TP || ecmd->port != PORT_TP)
return -EINVAL;
- /* Check that PHY supports these settings and work out the
- * basic control bits */
- if (ecmd->duplex) {
+ /* Check that PHY supports these settings */
+ if (ecmd->autoneg) {
+ required = SUPPORTED_Autoneg;
+ } else if (ecmd->duplex) {
switch (ecmd->speed) {
- case SPEED_10:
- ctrl1_bits = BMCR_FULLDPLX;
- required = SUPPORTED_10baseT_Full;
- break;
- case SPEED_100:
- ctrl1_bits = BMCR_SPEED100 | BMCR_FULLDPLX;
- required = SUPPORTED_100baseT_Full;
- break;
- case SPEED_1000:
- ctrl1_bits = BMCR_SPEED1000 | BMCR_FULLDPLX;
- required = SUPPORTED_1000baseT_Full;
- break;
- case SPEED_10000:
- ctrl1_bits = (BMCR_SPEED1000 | BMCR_SPEED100 |
- BMCR_FULLDPLX);
- required = SUPPORTED_10000baseT_Full;
- break;
- default:
- return -EINVAL;
+ case SPEED_10: required = SUPPORTED_10baseT_Full; break;
+ case SPEED_100: required = SUPPORTED_100baseT_Full; break;
+ default: return -EINVAL;
}
} else {
switch (ecmd->speed) {
- case SPEED_10:
- ctrl1_bits = 0;
- required = SUPPORTED_10baseT_Half;
- break;
- case SPEED_100:
- ctrl1_bits = BMCR_SPEED100;
- required = SUPPORTED_100baseT_Half;
- break;
- case SPEED_1000:
- ctrl1_bits = BMCR_SPEED1000;
- required = SUPPORTED_1000baseT_Half;
- break;
- default:
- return -EINVAL;
+ case SPEED_10: required = SUPPORTED_10baseT_Half; break;
+ case SPEED_100: required = SUPPORTED_100baseT_Half; break;
+ default: return -EINVAL;
}
}
- if (ecmd->autoneg)
- required |= SUPPORTED_Autoneg;
required |= ecmd->advertising;
if (required & ~prev.supported)
return -EINVAL;
- /* Set the basic control bits */
- reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_PMAPMD,
- MDIO_MMDREG_CTRL1);
- reg &= ~(BMCR_SPEED1000 | BMCR_SPEED100 | BMCR_FULLDPLX | 0x003c);
- reg |= ctrl1_bits;
- mdio_clause45_write(efx, phy_id, MDIO_MMD_PMAPMD, MDIO_MMDREG_CTRL1,
- reg);
-
- /* Set the AN registers */
- if (ecmd->autoneg != prev.autoneg ||
- ecmd->advertising != prev.advertising) {
- bool xnp = false;
-
- if (efx->phy_op->set_xnp_advertise)
- xnp = efx->phy_op->set_xnp_advertise(efx,
- ecmd->advertising);
-
- if (ecmd->autoneg) {
- reg = 0;
- if (ecmd->advertising & ADVERTISED_10baseT_Half)
- reg |= ADVERTISE_10HALF;
- if (ecmd->advertising & ADVERTISED_10baseT_Full)
- reg |= ADVERTISE_10FULL;
- if (ecmd->advertising & ADVERTISED_100baseT_Half)
- reg |= ADVERTISE_100HALF;
- if (ecmd->advertising & ADVERTISED_100baseT_Full)
- reg |= ADVERTISE_100FULL;
- if (xnp)
- reg |= ADVERTISE_RESV;
- mdio_clause45_write(efx, phy_id, MDIO_MMD_AN,
- MDIO_AN_ADVERTISE, reg);
- }
+ if (ecmd->autoneg) {
+ bool xnp = (ecmd->advertising & ADVERTISED_10000baseT_Full
+ || EFX_WORKAROUND_13204(efx));
+
+ /* Set up the base page */
+ reg = ADVERTISE_CSMA;
+ if (ecmd->advertising & ADVERTISED_10baseT_Half)
+ reg |= ADVERTISE_10HALF;
+ if (ecmd->advertising & ADVERTISED_10baseT_Full)
+ reg |= ADVERTISE_10FULL;
+ if (ecmd->advertising & ADVERTISED_100baseT_Half)
+ reg |= ADVERTISE_100HALF;
+ if (ecmd->advertising & ADVERTISED_100baseT_Full)
+ reg |= ADVERTISE_100FULL;
+ if (xnp)
+ reg |= ADVERTISE_RESV;
+ else if (ecmd->advertising & (ADVERTISED_1000baseT_Half |
+ ADVERTISED_1000baseT_Full))
+ reg |= ADVERTISE_NPAGE;
+ reg |= efx_fc_advertise(efx->wanted_fc);
+ mdio_clause45_write(efx, phy_id, MDIO_MMD_AN,
+ MDIO_AN_ADVERTISE, reg);
+
+ /* Set up the (extended) next page if necessary */
+ if (efx->phy_op->set_npage_adv)
+ efx->phy_op->set_npage_adv(efx, ecmd->advertising);
+ /* Enable and restart AN */
reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_AN,
MDIO_MMDREG_CTRL1);
- if (ecmd->autoneg)
- reg |= BMCR_ANENABLE | BMCR_ANRESTART;
- else
- reg &= ~BMCR_ANENABLE;
- if (EFX_WORKAROUND_15195(efx)
- && LOOPBACK_MASK(efx) & efx->phy_op->loopbacks)
- reg &= ~BMCR_ANRESTART;
+ reg |= BMCR_ANENABLE;
+ if (!(EFX_WORKAROUND_15195(efx) &&
+ LOOPBACK_MASK(efx) & efx->phy_op->loopbacks))
+ reg |= BMCR_ANRESTART;
if (xnp)
reg |= 1 << MDIO_AN_CTRL_XNP_LBN;
else
reg &= ~(1 << MDIO_AN_CTRL_XNP_LBN);
mdio_clause45_write(efx, phy_id, MDIO_MMD_AN,
MDIO_MMDREG_CTRL1, reg);
+ } else {
+ /* Disable AN */
+ mdio_clause45_set_flag(efx, phy_id, MDIO_MMD_AN,
+ MDIO_MMDREG_CTRL1,
+ __ffs(BMCR_ANENABLE), false);
+
+ /* Set the basic control bits */
+ reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_PMAPMD,
+ MDIO_MMDREG_CTRL1);
+ reg &= ~(BMCR_SPEED1000 | BMCR_SPEED100 | BMCR_FULLDPLX |
+ 0x003c);
+ if (ecmd->speed == SPEED_100)
+ reg |= BMCR_SPEED100;
+ if (ecmd->duplex)
+ reg |= BMCR_FULLDPLX;
+ mdio_clause45_write(efx, phy_id, MDIO_MMD_PMAPMD,
+ MDIO_MMDREG_CTRL1, reg);
}
return 0;
diff --git a/drivers/net/sfc/mdio_10g.h b/drivers/net/sfc/mdio_10g.h
index 09bf801..8ba4977 100644
--- a/drivers/net/sfc/mdio_10g.h
+++ b/drivers/net/sfc/mdio_10g.h
@@ -155,7 +155,8 @@
#define MDIO_AN_XNP 22
#define MDIO_AN_LPA_XNP 25
-#define MDIO_AN_10GBT_ADVERTISE 32
+#define MDIO_AN_10GBT_CTRL 32
+#define MDIO_AN_10GBT_CTRL_ADV_10G_LBN 12
#define MDIO_AN_10GBT_STATUS (33)
#define MDIO_AN_10GBT_STATUS_MS_FLT_LBN (15) /* MASTER/SLAVE config fault */
#define MDIO_AN_10GBT_STATUS_MS_LBN (14) /* MASTER/SLAVE config */
diff --git a/drivers/net/sfc/net_driver.h b/drivers/net/sfc/net_driver.h
index 5f255f7..8eb411a 100644
--- a/drivers/net/sfc/net_driver.h
+++ b/drivers/net/sfc/net_driver.h
@@ -566,7 +566,7 @@ struct efx_mac_operations {
* @poll: Poll for hardware state. Serialised by the mac_lock.
* @get_settings: Get ethtool settings. Serialised by the mac_lock.
* @set_settings: Set ethtool settings. Serialised by the mac_lock.
- * @set_xnp_advertise: Set abilities advertised in Extended Next Page
+ * @set_npage_adv: Set abilities advertised in (Extended) Next Page
* (only needed where AN bit is set in mmds)
* @num_tests: Number of PHY-specific tests/results
* @test_names: Names of the tests/results
@@ -586,7 +586,7 @@ struct efx_phy_operations {
struct ethtool_cmd *ecmd);
int (*set_settings) (struct efx_nic *efx,
struct ethtool_cmd *ecmd);
- bool (*set_xnp_advertise) (struct efx_nic *efx, u32);
+ void (*set_npage_adv) (struct efx_nic *efx, u32);
u32 num_tests;
const char *const *test_names;
int (*run_tests) (struct efx_nic *efx, int *results, unsigned flags);
diff --git a/drivers/net/sfc/tenxpress.c b/drivers/net/sfc/tenxpress.c
index c958461..412d209 100644
--- a/drivers/net/sfc/tenxpress.c
+++ b/drivers/net/sfc/tenxpress.c
@@ -179,11 +179,13 @@
#define C22EXT_STATUS_LINK_LBN 2
#define C22EXT_STATUS_LINK_WIDTH 1
-#define C22EXT_MSTSLV_REG 49162
-#define C22EXT_MSTSLV_1000_HD_LBN 10
-#define C22EXT_MSTSLV_1000_HD_WIDTH 1
-#define C22EXT_MSTSLV_1000_FD_LBN 11
-#define C22EXT_MSTSLV_1000_FD_WIDTH 1
+#define C22EXT_MSTSLV_CTRL 49161
+#define C22EXT_MSTSLV_CTRL_ADV_1000_HD_LBN 8
+#define C22EXT_MSTSLV_CTRL_ADV_1000_FD_LBN 9
+
+#define C22EXT_MSTSLV_STATUS 49162
+#define C22EXT_MSTSLV_STATUS_LP_1000_HD_LBN 10
+#define C22EXT_MSTSLV_STATUS_LP_1000_FD_LBN 11
/* Time to wait between powering down the LNPGA and turning off the power
* rails */
@@ -741,114 +743,76 @@ reset:
return rc;
}
-static u32 tenxpress_get_xnp_lpa(struct efx_nic *efx)
+static void
+tenxpress_get_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd)
{
- int phy = efx->mii.phy_id;
- u32 lpa = 0;
+ int phy_id = efx->mii.phy_id;
+ u32 adv = 0, lpa = 0;
int reg;
if (efx->phy_type != PHY_TYPE_SFX7101) {
- reg = mdio_clause45_read(efx, phy, MDIO_MMD_C22EXT,
- C22EXT_MSTSLV_REG);
- if (reg & (1 << C22EXT_MSTSLV_1000_HD_LBN))
+ reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_C22EXT,
+ C22EXT_MSTSLV_CTRL);
+ if (reg & (1 << C22EXT_MSTSLV_CTRL_ADV_1000_FD_LBN))
+ adv |= ADVERTISED_1000baseT_Full;
+ reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_C22EXT,
+ C22EXT_MSTSLV_STATUS);
+ if (reg & (1 << C22EXT_MSTSLV_STATUS_LP_1000_HD_LBN))
lpa |= ADVERTISED_1000baseT_Half;
- if (reg & (1 << C22EXT_MSTSLV_1000_FD_LBN))
+ if (reg & (1 << C22EXT_MSTSLV_STATUS_LP_1000_FD_LBN))
lpa |= ADVERTISED_1000baseT_Full;
}
- reg = mdio_clause45_read(efx, phy, MDIO_MMD_AN, MDIO_AN_10GBT_STATUS);
+ reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_AN,
+ MDIO_AN_10GBT_CTRL);
+ if (reg & (1 << MDIO_AN_10GBT_CTRL_ADV_10G_LBN))
+ adv |= ADVERTISED_10000baseT_Full;
+ reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_AN,
+ MDIO_AN_10GBT_STATUS);
if (reg & (1 << MDIO_AN_10GBT_STATUS_LP_10G_LBN))
lpa |= ADVERTISED_10000baseT_Full;
- return lpa;
-}
-
-static void sfx7101_get_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd)
-{
- mdio_clause45_get_settings_ext(efx, ecmd, ADVERTISED_10000baseT_Full,
- tenxpress_get_xnp_lpa(efx));
- ecmd->supported |= SUPPORTED_10000baseT_Full;
- ecmd->advertising |= ADVERTISED_10000baseT_Full;
-}
-
-static void sft9001_get_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd)
-{
- int phy_id = efx->mii.phy_id;
- u32 xnp_adv = 0;
- int reg;
-
- reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_PMAPMD,
- PMA_PMD_SPEED_ENABLE_REG);
- if (EFX_WORKAROUND_13204(efx) && (reg & (1 << PMA_PMD_100TX_ADV_LBN)))
- xnp_adv |= ADVERTISED_100baseT_Full;
- if (reg & (1 << PMA_PMD_1000T_ADV_LBN))
- xnp_adv |= ADVERTISED_1000baseT_Full;
- if (reg & (1 << PMA_PMD_10000T_ADV_LBN))
- xnp_adv |= ADVERTISED_10000baseT_Full;
-
- mdio_clause45_get_settings_ext(efx, ecmd, xnp_adv,
- tenxpress_get_xnp_lpa(efx));
- ecmd->supported |= (SUPPORTED_100baseT_Half |
- SUPPORTED_100baseT_Full |
- SUPPORTED_1000baseT_Full);
+ mdio_clause45_get_settings_ext(efx, ecmd, adv, lpa);
- /* Use the vendor defined C22ext register for duplex settings */
- if (ecmd->speed != SPEED_10000 && !ecmd->autoneg) {
- reg = mdio_clause45_read(efx, phy_id, MDIO_MMD_C22EXT,
- GPHY_XCONTROL_REG);
- ecmd->duplex = (reg & (1 << GPHY_DUPLEX_LBN) ?
- DUPLEX_FULL : DUPLEX_HALF);
- }
+ if (efx->phy_type != PHY_TYPE_SFX7101)
+ ecmd->supported |= (SUPPORTED_100baseT_Full |
+ SUPPORTED_1000baseT_Full);
/* In loopback, the PHY automatically brings up the correct interface,
* but doesn't advertise the correct speed. So override it */
if (efx->loopback_mode == LOOPBACK_GPHY)
ecmd->speed = SPEED_1000;
- else if (LOOPBACK_MASK(efx) & SFT9001_LOOPBACKS)
+ else if (LOOPBACK_MASK(efx) & efx->phy_op->loopbacks)
ecmd->speed = SPEED_10000;
}
-static int sft9001_set_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd)
+static int tenxpress_set_settings(struct efx_nic *efx, struct ethtool_cmd *ecmd)
{
- int phy_id = efx->mii.phy_id;
- int rc;
-
- rc = mdio_clause45_set_settings(efx, ecmd);
- if (rc)
- return rc;
+ if (!ecmd->autoneg)
+ return -EINVAL;
- if (ecmd->speed != SPEED_10000 && !ecmd->autoneg)
- mdio_clause45_set_flag(efx, phy_id, MDIO_MMD_C22EXT,
- GPHY_XCONTROL_REG, GPHY_DUPLEX_LBN,
- ecmd->duplex == DUPLEX_FULL);
+ return mdio_clause45_set_settings(efx, ecmd);
+}
- return rc;
+static void sfx7101_set_npage_adv(struct efx_nic *efx, u32 advertising)
+{
+ mdio_clause45_set_flag(efx, efx->mii.phy_id, MDIO_MMD_AN,
+ MDIO_AN_10GBT_CTRL,
+ MDIO_AN_10GBT_CTRL_ADV_10G_LBN,
+ advertising & ADVERTISED_10000baseT_Full);
}
-static bool sft9001_set_xnp_advertise(struct efx_nic *efx, u32 advertising)
+static void sft9001_set_npage_adv(struct efx_nic *efx, u32 advertising)
{
- int phy = efx->mii.phy_id;
- int reg = mdio_clause45_read(efx, phy, MDIO_MMD_PMAPMD,
- PMA_PMD_SPEED_ENABLE_REG);
- bool enabled;
-
- reg &= ~((1 << 2) | (1 << 3));
- if (EFX_WORKAROUND_13204(efx) &&
- (advertising & ADVERTISED_100baseT_Full))
- reg |= 1 << PMA_PMD_100TX_ADV_LBN;
- if (advertising & ADVERTISED_1000baseT_Full)
- reg |= 1 << PMA_PMD_1000T_ADV_LBN;
- if (advertising & ADVERTISED_10000baseT_Full)
- reg |= 1 << PMA_PMD_10000T_ADV_LBN;
- mdio_clause45_write(efx, phy, MDIO_MMD_PMAPMD,
- PMA_PMD_SPEED_ENABLE_REG, reg);
-
- enabled = (advertising &
- (ADVERTISED_1000baseT_Half |
- ADVERTISED_1000baseT_Full |
- ADVERTISED_10000baseT_Full));
- if (EFX_WORKAROUND_13204(efx))
- enabled |= (advertising & ADVERTISED_100baseT_Full);
- return enabled;
+ int phy_id = efx->mii.phy_id;
+
+ mdio_clause45_set_flag(efx, phy_id, MDIO_MMD_C22EXT,
+ C22EXT_MSTSLV_CTRL,
+ C22EXT_MSTSLV_CTRL_ADV_1000_FD_LBN,
+ advertising & ADVERTISED_1000baseT_Full);
+ mdio_clause45_set_flag(efx, phy_id, MDIO_MMD_AN,
+ MDIO_AN_10GBT_CTRL,
+ MDIO_AN_10GBT_CTRL_ADV_10G_LBN,
+ advertising & ADVERTISED_10000baseT_Full);
}
struct efx_phy_operations falcon_sfx7101_phy_ops = {
@@ -858,8 +822,9 @@ struct efx_phy_operations falcon_sfx7101_phy_ops = {
.poll = tenxpress_phy_poll,
.fini = tenxpress_phy_fini,
.clear_interrupt = efx_port_dummy_op_void,
- .get_settings = sfx7101_get_settings,
- .set_settings = mdio_clause45_set_settings,
+ .get_settings = tenxpress_get_settings,
+ .set_settings = tenxpress_set_settings,
+ .set_npage_adv = sfx7101_set_npage_adv,
.num_tests = ARRAY_SIZE(sfx7101_test_names),
.test_names = sfx7101_test_names,
.run_tests = sfx7101_run_tests,
@@ -874,9 +839,9 @@ struct efx_phy_operations falcon_sft9001_phy_ops = {
.poll = tenxpress_phy_poll,
.fini = tenxpress_phy_fini,
.clear_interrupt = efx_port_dummy_op_void,
- .get_settings = sft9001_get_settings,
- .set_settings = sft9001_set_settings,
- .set_xnp_advertise = sft9001_set_xnp_advertise,
+ .get_settings = tenxpress_get_settings,
+ .set_settings = tenxpress_set_settings,
+ .set_npage_adv = sft9001_set_npage_adv,
.num_tests = ARRAY_SIZE(sft9001_test_names),
.test_names = sft9001_test_names,
.run_tests = sft9001_run_tests,
diff --git a/drivers/net/sfc/workarounds.h b/drivers/net/sfc/workarounds.h
index b810dcd..78de68f 100644
--- a/drivers/net/sfc/workarounds.h
+++ b/drivers/net/sfc/workarounds.h
@@ -18,7 +18,6 @@
#define EFX_WORKAROUND_ALWAYS(efx) 1
#define EFX_WORKAROUND_FALCON_A(efx) (falcon_rev(efx) <= FALCON_REV_A1)
#define EFX_WORKAROUND_10G(efx) EFX_IS10G(efx)
-#define EFX_WORKAROUND_SFT9001A(efx) ((efx)->phy_type == PHY_TYPE_SFT9001A)
#define EFX_WORKAROUND_SFT9001(efx) ((efx)->phy_type == PHY_TYPE_SFT9001A || \
(efx)->phy_type == PHY_TYPE_SFT9001B)
@@ -55,9 +54,6 @@
/* Need to send XNP pages for 100BaseT */
#define EFX_WORKAROUND_13204 EFX_WORKAROUND_SFT9001
-/* Need to keep AN enabled */
-#define EFX_WORKAROUND_13963 EFX_WORKAROUND_SFT9001A
-
/* Don't restart AN in near-side loopback */
#define EFX_WORKAROUND_15195 EFX_WORKAROUND_SFT9001
generated by cgit v0.10.2 at 2024-11-10 02:53:18 (GMT)