diff options
| -rw-r--r-- | Documentation/devicetree/bindings/clock/zynq-7000.txt | 4 | ||||
| -rw-r--r-- | arch/arm/boot/dts/zynq-7000.dtsi | 42 | ||||
| -rw-r--r-- | arch/arm/mach-zynq/common.c | 2 | ||||
| -rw-r--r-- | drivers/clk/zynq/clkc.c | 89 | ||||
| -rw-r--r-- | include/linux/clk/zynq.h | 2 |
5 files changed, 88 insertions, 51 deletions
diff --git a/Documentation/devicetree/bindings/clock/zynq-7000.txt b/Documentation/devicetree/bindings/clock/zynq-7000.txt index 17b4a94..d93746c 100644 --- a/Documentation/devicetree/bindings/clock/zynq-7000.txt +++ b/Documentation/devicetree/bindings/clock/zynq-7000.txt @@ -14,6 +14,7 @@ for all clock consumers of PS clocks. Required properties: - #clock-cells : Must be 1 - compatible : "xlnx,ps7-clkc" + - reg : SLCR offset and size taken via syscon < 0x100 0x100 > - ps-clk-frequency : Frequency of the oscillator providing ps_clk in HZ (usually 33 MHz oscillators are used for Zynq platforms) - clock-output-names : List of strings used to name the clock outputs. Shall be @@ -87,10 +88,11 @@ Clock outputs: 47: dbg_apb Example: - clkc: clkc { + clkc: clkc@100 { #clock-cells = <1>; compatible = "xlnx,ps7-clkc"; ps-clk-frequency = <33333333>; + reg = <0x100 0x100>; clock-output-names = "armpll", "ddrpll", "iopll", "cpu_6or4x", "cpu_3or2x", "cpu_2x", "cpu_1x", "ddr2x", "ddr3x", "dci", "lqspi", "smc", "pcap", "gem0", "gem1", diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi index 81e5677..602e12e 100644 --- a/arch/arm/boot/dts/zynq-7000.dtsi +++ b/arch/arm/boot/dts/zynq-7000.dtsi @@ -123,30 +123,28 @@ } ; slcr: slcr@f8000000 { + #address-cells = <1>; + #size-cells = <1>; compatible = "xlnx,zynq-slcr", "syscon"; reg = <0xF8000000 0x1000>; - - clocks { - #address-cells = <1>; - #size-cells = <0>; - - clkc: clkc { - #clock-cells = <1>; - compatible = "xlnx,ps7-clkc"; - ps-clk-frequency = <33333333>; - fclk-enable = <0>; - clock-output-names = "armpll", "ddrpll", "iopll", "cpu_6or4x", - "cpu_3or2x", "cpu_2x", "cpu_1x", "ddr2x", "ddr3x", - "dci", "lqspi", "smc", "pcap", "gem0", "gem1", - "fclk0", "fclk1", "fclk2", "fclk3", "can0", "can1", - "sdio0", "sdio1", "uart0", "uart1", "spi0", "spi1", - "dma", "usb0_aper", "usb1_aper", "gem0_aper", - "gem1_aper", "sdio0_aper", "sdio1_aper", - "spi0_aper", "spi1_aper", "can0_aper", "can1_aper", - "i2c0_aper", "i2c1_aper", "uart0_aper", "uart1_aper", - "gpio_aper", "lqspi_aper", "smc_aper", "swdt", - "dbg_trc", "dbg_apb"; - }; + ranges; + clkc: clkc@100 { + #clock-cells = <1>; + compatible = "xlnx,ps7-clkc"; + ps-clk-frequency = <33333333>; + fclk-enable = <0>; + clock-output-names = "armpll", "ddrpll", "iopll", "cpu_6or4x", + "cpu_3or2x", "cpu_2x", "cpu_1x", "ddr2x", "ddr3x", + "dci", "lqspi", "smc", "pcap", "gem0", "gem1", + "fclk0", "fclk1", "fclk2", "fclk3", "can0", "can1", + "sdio0", "sdio1", "uart0", "uart1", "spi0", "spi1", + "dma", "usb0_aper", "usb1_aper", "gem0_aper", + "gem1_aper", "sdio0_aper", "sdio1_aper", + "spi0_aper", "spi1_aper", "can0_aper", "can1_aper", + "i2c0_aper", "i2c1_aper", "uart0_aper", "uart1_aper", + "gpio_aper", "lqspi_aper", "smc_aper", "swdt", + "dbg_trc", "dbg_apb"; + reg = <0x100 0x100>; }; }; diff --git a/arch/arm/mach-zynq/common.c b/arch/arm/mach-zynq/common.c index 38401cf..93ea19b 100644 --- a/arch/arm/mach-zynq/common.c +++ b/arch/arm/mach-zynq/common.c @@ -67,7 +67,7 @@ static void __init zynq_timer_init(void) { zynq_early_slcr_init(); - zynq_clock_init(zynq_slcr_base); + zynq_clock_init(); clocksource_of_init(); } diff --git a/drivers/clk/zynq/clkc.c b/drivers/clk/zynq/clkc.c index 09dd017..03052d6 100644 --- a/drivers/clk/zynq/clkc.c +++ b/drivers/clk/zynq/clkc.c @@ -21,34 +21,35 @@ #include <linux/clk/zynq.h> #include <linux/clk-provider.h> #include <linux/of.h> +#include <linux/of_address.h> #include <linux/slab.h> #include <linux/string.h> #include <linux/io.h> -static void __iomem *zynq_slcr_base_priv; - -#define SLCR_ARMPLL_CTRL (zynq_slcr_base_priv + 0x100) -#define SLCR_DDRPLL_CTRL (zynq_slcr_base_priv + 0x104) -#define SLCR_IOPLL_CTRL (zynq_slcr_base_priv + 0x108) -#define SLCR_PLL_STATUS (zynq_slcr_base_priv + 0x10c) -#define SLCR_ARM_CLK_CTRL (zynq_slcr_base_priv + 0x120) -#define SLCR_DDR_CLK_CTRL (zynq_slcr_base_priv + 0x124) -#define SLCR_DCI_CLK_CTRL (zynq_slcr_base_priv + 0x128) -#define SLCR_APER_CLK_CTRL (zynq_slcr_base_priv + 0x12c) -#define SLCR_GEM0_CLK_CTRL (zynq_slcr_base_priv + 0x140) -#define SLCR_GEM1_CLK_CTRL (zynq_slcr_base_priv + 0x144) -#define SLCR_SMC_CLK_CTRL (zynq_slcr_base_priv + 0x148) -#define SLCR_LQSPI_CLK_CTRL (zynq_slcr_base_priv + 0x14c) -#define SLCR_SDIO_CLK_CTRL (zynq_slcr_base_priv + 0x150) -#define SLCR_UART_CLK_CTRL (zynq_slcr_base_priv + 0x154) -#define SLCR_SPI_CLK_CTRL (zynq_slcr_base_priv + 0x158) -#define SLCR_CAN_CLK_CTRL (zynq_slcr_base_priv + 0x15c) -#define SLCR_CAN_MIOCLK_CTRL (zynq_slcr_base_priv + 0x160) -#define SLCR_DBG_CLK_CTRL (zynq_slcr_base_priv + 0x164) -#define SLCR_PCAP_CLK_CTRL (zynq_slcr_base_priv + 0x168) -#define SLCR_FPGA0_CLK_CTRL (zynq_slcr_base_priv + 0x170) -#define SLCR_621_TRUE (zynq_slcr_base_priv + 0x1c4) -#define SLCR_SWDT_CLK_SEL (zynq_slcr_base_priv + 0x304) +static void __iomem *zynq_clkc_base; + +#define SLCR_ARMPLL_CTRL (zynq_clkc_base + 0x00) +#define SLCR_DDRPLL_CTRL (zynq_clkc_base + 0x04) +#define SLCR_IOPLL_CTRL (zynq_clkc_base + 0x08) +#define SLCR_PLL_STATUS (zynq_clkc_base + 0x0c) +#define SLCR_ARM_CLK_CTRL (zynq_clkc_base + 0x20) +#define SLCR_DDR_CLK_CTRL (zynq_clkc_base + 0x24) +#define SLCR_DCI_CLK_CTRL (zynq_clkc_base + 0x28) +#define SLCR_APER_CLK_CTRL (zynq_clkc_base + 0x2c) +#define SLCR_GEM0_CLK_CTRL (zynq_clkc_base + 0x40) +#define SLCR_GEM1_CLK_CTRL (zynq_clkc_base + 0x44) +#define SLCR_SMC_CLK_CTRL (zynq_clkc_base + 0x48) +#define SLCR_LQSPI_CLK_CTRL (zynq_clkc_base + 0x4c) +#define SLCR_SDIO_CLK_CTRL (zynq_clkc_base + 0x50) +#define SLCR_UART_CLK_CTRL (zynq_clkc_base + 0x54) +#define SLCR_SPI_CLK_CTRL (zynq_clkc_base + 0x58) +#define SLCR_CAN_CLK_CTRL (zynq_clkc_base + 0x5c) +#define SLCR_CAN_MIOCLK_CTRL (zynq_clkc_base + 0x60) +#define SLCR_DBG_CLK_CTRL (zynq_clkc_base + 0x64) +#define SLCR_PCAP_CLK_CTRL (zynq_clkc_base + 0x68) +#define SLCR_FPGA0_CLK_CTRL (zynq_clkc_base + 0x70) +#define SLCR_621_TRUE (zynq_clkc_base + 0xc4) +#define SLCR_SWDT_CLK_SEL (zynq_clkc_base + 0x204) #define NUM_MIO_PINS 54 @@ -569,8 +570,44 @@ static void __init zynq_clk_setup(struct device_node *np) CLK_OF_DECLARE(zynq_clkc, "xlnx,ps7-clkc", zynq_clk_setup); -void __init zynq_clock_init(void __iomem *slcr_base) +void __init zynq_clock_init(void) { - zynq_slcr_base_priv = slcr_base; + struct device_node *np; + struct device_node *slcr; + struct resource res; + + np = of_find_compatible_node(NULL, NULL, "xlnx,ps7-clkc"); + if (!np) { + pr_err("%s: clkc node not found\n", __func__); + goto np_err; + } + + if (of_address_to_resource(np, 0, &res)) { + pr_err("%s: failed to get resource\n", np->name); + goto np_err; + } + + slcr = of_get_parent(np); + + if (slcr->data) { + zynq_clkc_base = (__force void __iomem *)slcr->data + res.start; + } else { + pr_err("%s: Unable to get I/O memory\n", np->name); + of_node_put(slcr); + goto np_err; + } + + pr_info("%s: clkc starts at %p\n", __func__, zynq_clkc_base); + + of_node_put(slcr); + of_node_put(np); + of_clk_init(NULL); + + return; + +np_err: + of_node_put(np); + BUG(); + return; } diff --git a/include/linux/clk/zynq.h b/include/linux/clk/zynq.h index e062d31..7a5633b 100644 --- a/include/linux/clk/zynq.h +++ b/include/linux/clk/zynq.h @@ -22,7 +22,7 @@ #include <linux/spinlock.h> -void zynq_clock_init(void __iomem *slcr); +void zynq_clock_init(void); struct clk *clk_register_zynq_pll(const char *name, const char *parent, void __iomem *pll_ctrl, void __iomem *pll_status, u8 lock_index, |