diff options
24 files changed, 745 insertions, 122 deletions
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 679d7cc..7ed50a5 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -409,15 +409,19 @@ dtb-$(CONFIG_ARCH_OMAP3) += \ omap3-overo-alto35.dtb \ omap3-overo-chestnut43.dtb \ omap3-overo-gallop43.dtb \ + omap3-overo-palo35.dtb \ omap3-overo-palo43.dtb \ omap3-overo-storm-alto35.dtb \ omap3-overo-storm-chestnut43.dtb \ omap3-overo-storm-gallop43.dtb \ + omap3-overo-storm-palo35.dtb \ omap3-overo-storm-palo43.dtb \ omap3-overo-storm-summit.dtb \ omap3-overo-storm-tobi.dtb \ + omap3-overo-storm-tobiduo.dtb \ omap3-overo-summit.dtb \ omap3-overo-tobi.dtb \ + omap3-overo-tobiduo.dtb \ omap3-pandora-600mhz.dtb \ omap3-pandora-1ghz.dtb \ omap3-sbc-t3517.dtb \ diff --git a/arch/arm/boot/dts/am335x-boneblack.dts b/arch/arm/boot/dts/am335x-boneblack.dts index 5c42d25..eadbba3 100644 --- a/arch/arm/boot/dts/am335x-boneblack.dts +++ b/arch/arm/boot/dts/am335x-boneblack.dts @@ -68,16 +68,26 @@ &lcdc { status = "okay"; + port { + lcdc_0: endpoint@0 { + remote-endpoint = <&hdmi_0>; + }; + }; }; -/ { - hdmi { - compatible = "ti,tilcdc,slave"; - i2c = <&i2c0>; +&i2c0 { + tda19988 { + compatible = "nxp,tda998x"; + reg = <0x70>; pinctrl-names = "default", "off"; pinctrl-0 = <&nxp_hdmi_bonelt_pins>; pinctrl-1 = <&nxp_hdmi_bonelt_off_pins>; - status = "okay"; + + port { + hdmi_0: endpoint@0 { + remote-endpoint = <&lcdc_0>; + }; + }; }; }; diff --git a/arch/arm/boot/dts/am335x-evm.dts b/arch/arm/boot/dts/am335x-evm.dts index 765be27..1942a5c 100644 --- a/arch/arm/boot/dts/am335x-evm.dts +++ b/arch/arm/boot/dts/am335x-evm.dts @@ -136,16 +136,29 @@ }; sound { - compatible = "ti,da830-evm-audio"; - ti,model = "AM335x-EVM"; - ti,audio-codec = <&tlv320aic3106>; - ti,mcasp-controller = <&mcasp1>; - ti,codec-clock-rate = <12000000>; - ti,audio-routing = - "Headphone Jack", "HPLOUT", - "Headphone Jack", "HPROUT", - "LINE1L", "Line In", - "LINE1R", "Line In"; + compatible = "simple-audio-card"; + simple-audio-card,name = "AM335x-EVM"; + simple-audio-card,widgets = + "Headphone", "Headphone Jack", + "Line", "Line In"; + simple-audio-card,routing = + "Headphone Jack", "HPLOUT", + "Headphone Jack", "HPROUT", + "LINE1L", "Line In", + "LINE1R", "Line In"; + simple-audio-card,format = "dsp_b"; + simple-audio-card,bitclock-master = <&sound_master>; + simple-audio-card,frame-master = <&sound_master>; + simple-audio-card,bitclock-inversion; + + simple-audio-card,cpu { + sound-dai = <&mcasp1>; + }; + + sound_master: simple-audio-card,codec { + sound-dai = <&tlv320aic3106>; + system-clock-frequency = <12000000>; + }; }; }; @@ -342,7 +355,7 @@ >; }; - am335x_evm_audio_pins: am335x_evm_audio_pins { + mcasp1_pins: mcasp1_pins { pinctrl-single,pins = < 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */ 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */ @@ -351,6 +364,15 @@ >; }; + mcasp1_pins_sleep: mcasp1_pins_sleep { + pinctrl-single,pins = < + 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x108 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + dcan1_pins_default: dcan1_pins_default { pinctrl-single,pins = < 0x168 (PIN_OUTPUT | MUX_MODE2) /* uart0_ctsn.d_can1_tx */ @@ -460,6 +482,7 @@ }; tlv320aic3106: tlv320aic3106@1b { + #sound-dai-cells = <0>; compatible = "ti,tlv320aic3106"; reg = <0x1b>; status = "okay"; @@ -575,19 +598,21 @@ #include "tps65910.dtsi" &mcasp1 { - pinctrl-names = "default"; - pinctrl-0 = <&am335x_evm_audio_pins>; + #sound-dai-cells = <0>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mcasp1_pins>; + pinctrl-1 = <&mcasp1_pins_sleep>; - status = "okay"; + status = "okay"; - op-mode = <0>; /* MCASP_IIS_MODE */ - tdm-slots = <2>; - /* 4 serializers */ - serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ - 0 0 1 2 - >; - tx-num-evt = <32>; - rx-num-evt = <32>; + op-mode = <0>; /* MCASP_IIS_MODE */ + tdm-slots = <2>; + /* 4 serializers */ + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ + 0 0 1 2 + >; + tx-num-evt = <32>; + rx-num-evt = <32>; }; &tps { diff --git a/arch/arm/boot/dts/am335x-evmsk.dts b/arch/arm/boot/dts/am335x-evmsk.dts index 156d05e..315bb02 100644 --- a/arch/arm/boot/dts/am335x-evmsk.dts +++ b/arch/arm/boot/dts/am335x-evmsk.dts @@ -141,14 +141,26 @@ }; sound { - compatible = "ti,da830-evm-audio"; - ti,model = "AM335x-EVMSK"; - ti,audio-codec = <&tlv320aic3106>; - ti,mcasp-controller = <&mcasp1>; - ti,codec-clock-rate = <24000000>; - ti,audio-routing = - "Headphone Jack", "HPLOUT", - "Headphone Jack", "HPROUT"; + compatible = "simple-audio-card"; + simple-audio-card,name = "AM335x-EVMSK"; + simple-audio-card,widgets = + "Headphone", "Headphone Jack"; + simple-audio-card,routing = + "Headphone Jack", "HPLOUT", + "Headphone Jack", "HPROUT"; + simple-audio-card,format = "dsp_b"; + simple-audio-card,bitclock-master = <&sound_master>; + simple-audio-card,frame-master = <&sound_master>; + simple-audio-card,bitclock-inversion; + + simple-audio-card,cpu { + sound-dai = <&mcasp1>; + }; + + sound_master: simple-audio-card,codec { + sound-dai = <&tlv320aic3106>; + system-clock-frequency = <24000000>; + }; }; panel { @@ -396,6 +408,15 @@ >; }; + mcasp1_pins_sleep: mcasp1_pins_sleep { + pinctrl-single,pins = < + 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x108 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + mmc2_pins: pinmux_mmc2_pins { pinctrl-single,pins = < 0x74 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_31 */ @@ -462,6 +483,7 @@ }; tlv320aic3106: tlv320aic3106@1b { + #sound-dai-cells = <0>; compatible = "ti,tlv320aic3106"; reg = <0x1b>; status = "okay"; @@ -661,19 +683,21 @@ }; &mcasp1 { - pinctrl-names = "default"; - pinctrl-0 = <&mcasp1_pins>; + #sound-dai-cells = <0>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mcasp1_pins>; + pinctrl-1 = <&mcasp1_pins_sleep>; - status = "okay"; + status = "okay"; - op-mode = <0>; /* MCASP_IIS_MODE */ - tdm-slots = <2>; - /* 4 serializers */ - serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ - 0 0 1 2 - >; - tx-num-evt = <32>; - rx-num-evt = <32>; + op-mode = <0>; /* MCASP_IIS_MODE */ + tdm-slots = <2>; + /* 4 serializers */ + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ + 0 0 1 2 + >; + tx-num-evt = <32>; + rx-num-evt = <32>; }; &tscadc { diff --git a/arch/arm/boot/dts/am33xx.dtsi b/arch/arm/boot/dts/am33xx.dtsi index 21fcc44..4c1b4a8 100644 --- a/arch/arm/boot/dts/am33xx.dtsi +++ b/arch/arm/boot/dts/am33xx.dtsi @@ -103,6 +103,15 @@ #size-cells = <1>; ranges = <0 0x44c00000 0x280000>; + wkup_m3: wkup_m3@100000 { + compatible = "ti,am3352-wkup-m3"; + reg = <0x100000 0x4000>, + <0x180000 0x2000>; + reg-names = "umem", "dmem"; + ti,hwmods = "wkup_m3"; + ti,pm-firmware = "am335x-pm-firmware.elf"; + }; + prcm: prcm@200000 { compatible = "ti,am3-prcm"; reg = <0x200000 0x4000>; @@ -762,14 +771,6 @@ reg = <0x40300000 0x10000>; /* 64k */ }; - wkup_m3: wkup_m3@44d00000 { - compatible = "ti,am3353-wkup-m3"; - reg = <0x44d00000 0x4000 /* M3 UMEM */ - 0x44d80000 0x2000>; /* M3 DMEM */ - ti,hwmods = "wkup_m3"; - ti,no-reset-on-init; - }; - elm: elm@48080000 { compatible = "ti,am3352-elm"; reg = <0x48080000 0x2000>; diff --git a/arch/arm/boot/dts/am4372.dtsi b/arch/arm/boot/dts/am4372.dtsi index ade28c79..6f6f393 100644 --- a/arch/arm/boot/dts/am4372.dtsi +++ b/arch/arm/boot/dts/am4372.dtsi @@ -83,6 +83,15 @@ #size-cells = <1>; ranges = <0 0x44c00000 0x287000>; + wkup_m3: wkup_m3@100000 { + compatible = "ti,am4372-wkup-m3"; + reg = <0x100000 0x4000>, + <0x180000 0x2000>; + reg-names = "umem", "dmem"; + ti,hwmods = "wkup_m3"; + ti,pm-firmware = "am335x-pm-firmware.elf"; + }; + prcm: prcm@1f0000 { compatible = "ti,am4-prcm"; reg = <0x1f0000 0x11000>; diff --git a/arch/arm/boot/dts/am437x-gp-evm.dts b/arch/arm/boot/dts/am437x-gp-evm.dts index 84aa30c..8e6ada7 100644 --- a/arch/arm/boot/dts/am437x-gp-evm.dts +++ b/arch/arm/boot/dts/am437x-gp-evm.dts @@ -24,9 +24,9 @@ serial3 = &uart3; }; - vmmcsd_fixed: fixedregulator-sd { + evm_v3_3d: fixedregulator-v3_3d { compatible = "regulator-fixed"; - regulator-name = "vmmcsd_fixed"; + regulator-name = "evm_v3_3d"; regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; enable-active-high; @@ -83,17 +83,6 @@ compatible = "osddisplays,osd057T0559-34ts", "panel-dpi"; label = "lcd"; - pinctrl-names = "default"; - pinctrl-0 = <&lcd_pins>; - - /* - * SelLCDorHDMI, LOW to select HDMI. This is not really the - * panel's enable GPIO, but we don't have HDMI driver support nor - * support to switch between two displays, so using this gpio as - * panel's enable should be safe. - */ - enable-gpios = <&gpio5 8 GPIO_ACTIVE_HIGH>; - panel-timing { clock-frequency = <33000000>; hactive = <800>; @@ -124,6 +113,32 @@ clock-frequency = <12000000>; }; + sound0: sound@0 { + compatible = "simple-audio-card"; + simple-audio-card,name = "AM437x-GP-EVM"; + simple-audio-card,widgets = + "Headphone", "Headphone Jack", + "Line", "Line In"; + simple-audio-card,routing = + "Headphone Jack", "HPLOUT", + "Headphone Jack", "HPROUT", + "LINE1L", "Line In", + "LINE1R", "Line In"; + simple-audio-card,format = "dsp_b"; + simple-audio-card,bitclock-master = <&sound0_master>; + simple-audio-card,frame-master = <&sound0_master>; + simple-audio-card,bitclock-inversion; + + simple-audio-card,cpu { + sound-dai = <&mcasp1>; + system-clock-frequency = <12000000>; + }; + + sound0_master: simple-audio-card,codec { + sound-dai = <&tlv320aic3106>; + system-clock-frequency = <12000000>; + }; + }; }; &am43xx_pinmux { @@ -270,7 +285,7 @@ >; }; - lcd_pins: lcd_pins { + display_mux_pins: display_mux_pins { pinctrl-single,pins = < /* GPIO 5_8 to select LCD / HDMI */ 0x238 (PIN_OUTPUT_PULLUP | MUX_MODE7) @@ -409,6 +424,24 @@ 0x234 (PIN_OUTPUT_PULLDOWN | MUX_MODE0) /* uart3_rtsn.uart3_rtsn */ >; }; + + mcasp1_pins: mcasp1_pins { + pinctrl-single,pins = < + 0x108 (PIN_OUTPUT_PULLDOWN | MUX_MODE4) /* mii1_col.mcasp1_axr2 */ + 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_crs.mcasp1_aclkx */ + 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* mii1_rxerr.mcasp1_fsx */ + 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */ + >; + }; + + mcasp1_sleep_pins: mcasp1_sleep_pins { + pinctrl-single,pins = < + 0x108 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; }; &i2c0 { @@ -521,6 +554,19 @@ }; }; }; + + tlv320aic3106: tlv320aic3106@1b { + #sound-dai-cells = <0>; + compatible = "ti,tlv320aic3106"; + reg = <0x1b>; + status = "okay"; + + /* Regulators */ + IOVDD-supply = <&evm_v3_3d>; /* V3_3D -> <tps63031> EN: V1_8D -> VBAT */ + AVDD-supply = <&evm_v3_3d>; /* v3_3AUD -> V3_3D -> ... */ + DRVDD-supply = <&evm_v3_3d>; /* v3_3AUD -> V3_3D -> ... */ + DVDD-supply = <&ldo1>; /* V1_8D -> LDO1 */ + }; }; &epwmss0 { @@ -558,13 +604,27 @@ }; &gpio5 { + pinctrl-names = "default"; + pinctrl-0 = <&display_mux_pins>; status = "okay"; ti,no-reset-on-init; + + p8 { + /* + * SelLCDorHDMI selects between display and audio paths: + * Low: HDMI display with audio via HDMI + * High: LCD display with analog audio via aic3111 codec + */ + gpio-hog; + gpios = <8 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "SelLCDorHDMI"; + }; }; &mmc1 { status = "okay"; - vmmc-supply = <&vmmcsd_fixed>; + vmmc-supply = <&evm_v3_3d>; bus-width = <4>; pinctrl-names = "default"; pinctrl-0 = <&mmc1_pins>; @@ -790,3 +850,21 @@ }; }; }; + +&mcasp1 { + #sound-dai-cells = <0>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mcasp1_pins>; + pinctrl-1 = <&mcasp1_sleep_pins>; + + status = "okay"; + + op-mode = <0>; /* MCASP_IIS_MODE */ + tdm-slots = <2>; + /* 4 serializers */ + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ + 0 0 1 2 + >; + tx-num-evt = <32>; + rx-num-evt = <32>; +}; diff --git a/arch/arm/boot/dts/am437x-sk-evm.dts b/arch/arm/boot/dts/am437x-sk-evm.dts index c17097d..22af448 100644 --- a/arch/arm/boot/dts/am437x-sk-evm.dts +++ b/arch/arm/boot/dts/am437x-sk-evm.dts @@ -32,14 +32,29 @@ }; sound { - compatible = "ti,da830-evm-audio"; - ti,model = "AM437x-SK-EVM"; - ti,audio-codec = <&tlv320aic3106>; - ti,mcasp-controller = <&mcasp1>; - ti,codec-clock-rate = <24000000>; - ti,audio-routing = - "Headphone Jack", "HPLOUT", - "Headphone Jack", "HPROUT"; + compatible = "simple-audio-card"; + simple-audio-card,name = "AM437x-SK-EVM"; + simple-audio-card,widgets = + "Headphone", "Headphone Jack", + "Line", "Line In"; + simple-audio-card,routing = + "Headphone Jack", "HPLOUT", + "Headphone Jack", "HPROUT", + "LINE1L", "Line In", + "LINE1R", "Line In"; + simple-audio-card,format = "dsp_b"; + simple-audio-card,bitclock-master = <&sound_master>; + simple-audio-card,frame-master = <&sound_master>; + simple-audio-card,bitclock-inversion; + + simple-audio-card,cpu { + sound-dai = <&mcasp1>; + }; + + sound_master: simple-audio-card,codec { + sound-dai = <&tlv320aic3106>; + system-clock-frequency = <24000000>; + }; }; matrix_keypad: matrix_keypad@0 { @@ -364,6 +379,15 @@ >; }; + mcasp1_pins_sleep: mcasp1_pins_sleep { + pinctrl-single,pins = < + 0x10c (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x110 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x108 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x144 (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; + lcd_pins: lcd_pins { pinctrl-single,pins = < 0x1c (PIN_OUTPUT_PULLDOWN | MUX_MODE7) /* gpcm_ad7.gpio1_7 */ @@ -480,6 +504,7 @@ }; tlv320aic3106: tlv320aic3106@1b { + #sound-dai-cells = <0>; compatible = "ti,tlv320aic3106"; reg = <0x1b>; status = "okay"; @@ -640,8 +665,10 @@ }; &mcasp1 { - pinctrl-names = "default"; + #sound-dai-cells = <0>; + pinctrl-names = "default", "sleep"; pinctrl-0 = <&mcasp1_pins>; + pinctrl-1 = <&mcasp1_pins_sleep>; status = "okay"; diff --git a/arch/arm/boot/dts/am43x-epos-evm.dts b/arch/arm/boot/dts/am43x-epos-evm.dts index 795d68a..86c2dfb 100644 --- a/arch/arm/boot/dts/am43x-epos-evm.dts +++ b/arch/arm/boot/dts/am43x-epos-evm.dts @@ -14,6 +14,7 @@ #include <dt-bindings/pinctrl/am43xx.h> #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/pwm/pwm.h> +#include <dt-bindings/sound/tlv320aic31xx-micbias.h> / { model = "TI AM43x EPOS EVM"; @@ -31,21 +32,18 @@ enable-active-high; }; + vbat: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "vbat"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + }; + lcd0: display { compatible = "osddisplays,osd057T0559-34ts", "panel-dpi"; label = "lcd"; - pinctrl-names = "default"; - pinctrl-0 = <&lcd_pins>; - - /* - * SelLCDorHDMI, LOW to select HDMI. This is not really the - * panel's enable GPIO, but we don't have HDMI driver support nor - * support to switch between two displays, so using this gpio as - * panel's enable should be safe. - */ - enable-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>; - panel-timing { clock-frequency = <33000000>; hactive = <800>; @@ -108,6 +106,38 @@ brightness-levels = <0 51 53 56 62 75 101 152 255>; default-brightness-level = <8>; }; + + sound0: sound@0 { + compatible = "simple-audio-card"; + simple-audio-card,name = "AM43-EPOS-EVM"; + simple-audio-card,widgets = + "Microphone", "Microphone Jack", + "Headphone", "Headphone Jack", + "Speaker", "Speaker"; + simple-audio-card,routing = + "MIC1LP", "Microphone Jack", + "MIC1RP", "Microphone Jack", + "MIC1LP", "MICBIAS", + "MIC1RP", "MICBIAS", + "Headphone Jack", "HPL", + "Headphone Jack", "HPR", + "Speaker", "SPL", + "Speaker", "SPR"; + simple-audio-card,format = "dsp_b"; + simple-audio-card,bitclock-master = <&sound0_master>; + simple-audio-card,frame-master = <&sound0_master>; + simple-audio-card,bitclock-inversion; + + simple-audio-card,cpu { + sound-dai = <&mcasp1>; + system-clock-frequency = <12000000>; + }; + + sound0_master: simple-audio-card,codec { + sound-dai = <&tlv320aic3111>; + system-clock-frequency = <12000000>; + }; + }; }; &am43xx_pinmux { @@ -278,7 +308,7 @@ >; }; - lcd_pins: lcd_pins { + display_mux_pins: display_mux_pins { pinctrl-single,pins = < /* GPMC CLK -> GPIO 2_1 to select LCD / HDMI */ 0x08C (PIN_OUTPUT_PULLUP | MUX_MODE7) @@ -320,6 +350,24 @@ 0x204 (DS0_PULL_UP_DOWN_EN | INPUT_EN | MUX_MODE7) >; }; + + mcasp1_pins: mcasp1_pins { + pinctrl-single,pins = < + 0x1a0 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* MCASP0_ACLKR/MCASP1_ACLKX */ + 0x1a4 (PIN_INPUT_PULLDOWN | MUX_MODE3) /* MCASP0_FSR/MCASP1_FSX */ + 0x1a8 (PIN_OUTPUT_PULLDOWN | MUX_MODE3)/* MCASP0_AXR1/MCASP1_AXR0 */ + 0x1ac (PIN_INPUT_PULLDOWN | MUX_MODE3) /* MCASP0_AHCLKX/MCASP1_AXR1 */ + >; + }; + + mcasp1_sleep_pins: mcasp1_sleep_pins { + pinctrl-single,pins = < + 0x1a0 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x1a4 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x1a8 (PIN_INPUT_PULLDOWN | MUX_MODE7) + 0x1ac (PIN_INPUT_PULLDOWN | MUX_MODE7) + >; + }; }; &mmc1 { @@ -399,6 +447,15 @@ regulator-always-on; }; + dcdc4: regulator-dcdc4 { + compatible = "ti,tps65218-dcdc4"; + regulator-name = "vdcdc4"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + dcdc5: regulator-dcdc5 { compatible = "ti,tps65218-dcdc5"; regulator-name = "v1_0bat"; @@ -441,6 +498,23 @@ touchscreen-size-x = <1024>; touchscreen-size-y = <600>; }; + + tlv320aic3111: tlv320aic3111@18 { + #sound-dai-cells = <0>; + compatible = "ti,tlv320aic3111"; + reg = <0x18>; + status = "okay"; + + ai31xx-micbias-vg = <MICBIAS_2_0V>; + + /* Regulators */ + HPVDD-supply = <&dcdc4>; /* v3_3AUD -> V3_3D -> DCDC4 */ + SPRVDD-supply = <&vbat>; /* vbat */ + SPLVDD-supply = <&vbat>; /* vbat */ + AVDD-supply = <&dcdc4>; /* v3_3AUD -> V3_3D -> DCDC4 */ + IOVDD-supply = <&dcdc4>; /* V3_3D -> DCDC4 */ + DVDD-supply = <&ldo1>; /* V1_8AUD -> V1_8D -> LDO1 */ + }; }; &i2c2 { @@ -458,7 +532,21 @@ }; &gpio2 { + pinctrl-names = "default"; + pinctrl-0 = <&display_mux_pins>; status = "okay"; + + p1 { + /* + * SelLCDorHDMI selects between display and audio paths: + * Low: HDMI display with audio via HDMI + * High: LCD display with analog audio via aic3111 codec + */ + gpio-hog; + gpios = <1 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "SelLCDorHDMI"; + }; }; &gpio3 { @@ -686,3 +774,21 @@ }; }; }; + +&mcasp1 { + #sound-dai-cells = <0>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&mcasp1_pins>; + pinctrl-1 = <&mcasp1_sleep_pins>; + + status = "okay"; + + op-mode = <0>; /* MCASP_IIS_MODE */ + tdm-slots = <2>; + /* 4 serializer */ + serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */ + 1 2 0 0 + >; + tx-num-evt = <32>; + rx-num-evt = <32>; +}; diff --git a/arch/arm/boot/dts/dm816x.dtsi b/arch/arm/boot/dts/dm816x.dtsi index 289806a..3c99cfa 100644 --- a/arch/arm/boot/dts/dm816x.dtsi +++ b/arch/arm/boot/dts/dm816x.dtsi @@ -58,7 +58,7 @@ * the whole bus hierarchy. */ ocp { - compatible = "ti,omap3-l3-smx", "simple-bus"; + compatible = "simple-bus"; reg = <0x44000000 0x10000>; interrupts = <9 10>; #address-cells = <1>; diff --git a/arch/arm/boot/dts/dra7.dtsi b/arch/arm/boot/dts/dra7.dtsi index 8f1e25b..c6474db 100644 --- a/arch/arm/boot/dts/dra7.dtsi +++ b/arch/arm/boot/dts/dra7.dtsi @@ -308,6 +308,15 @@ dma-requests = <127>; }; + sdma_xbar: dma-router@4a002b78 { + compatible = "ti,dra7-dma-crossbar"; + reg = <0x4a002b78 0xfc>; + #dma-cells = <1>; + dma-requests = <205>; + ti,dma-safe-map = <0>; + dma-masters = <&sdma>; + }; + gpio1: gpio@4ae10000 { compatible = "ti,omap4-gpio"; reg = <0x4ae10000 0x200>; @@ -403,7 +412,7 @@ ti,hwmods = "uart1"; clock-frequency = <48000000>; status = "disabled"; - dmas = <&sdma 49>, <&sdma 50>; + dmas = <&sdma_xbar 49>, <&sdma_xbar 50>; dma-names = "tx", "rx"; }; @@ -414,7 +423,7 @@ ti,hwmods = "uart2"; clock-frequency = <48000000>; status = "disabled"; - dmas = <&sdma 51>, <&sdma 52>; + dmas = <&sdma_xbar 51>, <&sdma_xbar 52>; dma-names = "tx", "rx"; }; @@ -425,7 +434,7 @@ ti,hwmods = "uart3"; clock-frequency = <48000000>; status = "disabled"; - dmas = <&sdma 53>, <&sdma 54>; + dmas = <&sdma_xbar 53>, <&sdma_xbar 54>; dma-names = "tx", "rx"; }; @@ -436,7 +445,7 @@ ti,hwmods = "uart4"; clock-frequency = <48000000>; status = "disabled"; - dmas = <&sdma 55>, <&sdma 56>; + dmas = <&sdma_xbar 55>, <&sdma_xbar 56>; dma-names = "tx", "rx"; }; @@ -447,7 +456,7 @@ ti,hwmods = "uart5"; clock-frequency = <48000000>; status = "disabled"; - dmas = <&sdma 63>, <&sdma 64>; + dmas = <&sdma_xbar 63>, <&sdma_xbar 64>; dma-names = "tx", "rx"; }; @@ -458,7 +467,7 @@ ti,hwmods = "uart6"; clock-frequency = <48000000>; status = "disabled"; - dmas = <&sdma 79>, <&sdma 80>; + dmas = <&sdma_xbar 79>, <&sdma_xbar 80>; dma-names = "tx", "rx"; }; @@ -867,7 +876,7 @@ ti,hwmods = "mmc1"; ti,dual-volt; ti,needs-special-reset; - dmas = <&sdma 61>, <&sdma 62>; + dmas = <&sdma_xbar 61>, <&sdma_xbar 62>; dma-names = "tx", "rx"; status = "disabled"; pbias-supply = <&pbias_mmc_reg>; @@ -879,7 +888,7 @@ interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "mmc2"; ti,needs-special-reset; - dmas = <&sdma 47>, <&sdma 48>; + dmas = <&sdma_xbar 47>, <&sdma_xbar 48>; dma-names = "tx", "rx"; status = "disabled"; }; @@ -890,7 +899,7 @@ interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "mmc3"; ti,needs-special-reset; - dmas = <&sdma 77>, <&sdma 78>; + dmas = <&sdma_xbar 77>, <&sdma_xbar 78>; dma-names = "tx", "rx"; status = "disabled"; }; @@ -901,7 +910,7 @@ interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; ti,hwmods = "mmc4"; ti,needs-special-reset; - dmas = <&sdma 57>, <&sdma 58>; + dmas = <&sdma_xbar 57>, <&sdma_xbar 58>; dma-names = "tx", "rx"; status = "disabled"; }; @@ -1046,14 +1055,14 @@ #size-cells = <0>; ti,hwmods = "mcspi1"; ti,spi-num-cs = <4>; - dmas = <&sdma 35>, - <&sdma 36>, - <&sdma 37>, - <&sdma 38>, - <&sdma 39>, - <&sdma 40>, - <&sdma 41>, - <&sdma 42>; + dmas = <&sdma_xbar 35>, + <&sdma_xbar 36>, + <&sdma_xbar 37>, + <&sdma_xbar 38>, + <&sdma_xbar 39>, + <&sdma_xbar 40>, + <&sdma_xbar 41>, + <&sdma_xbar 42>; dma-names = "tx0", "rx0", "tx1", "rx1", "tx2", "rx2", "tx3", "rx3"; status = "disabled"; @@ -1067,10 +1076,10 @@ #size-cells = <0>; ti,hwmods = "mcspi2"; ti,spi-num-cs = <2>; - dmas = <&sdma 43>, - <&sdma 44>, - <&sdma 45>, - <&sdma 46>; + dmas = <&sdma_xbar 43>, + <&sdma_xbar 44>, + <&sdma_xbar 45>, + <&sdma_xbar 46>; dma-names = "tx0", "rx0", "tx1", "rx1"; status = "disabled"; }; @@ -1083,7 +1092,7 @@ #size-cells = <0>; ti,hwmods = "mcspi3"; ti,spi-num-cs = <2>; - dmas = <&sdma 15>, <&sdma 16>; + dmas = <&sdma_xbar 15>, <&sdma_xbar 16>; dma-names = "tx0", "rx0"; status = "disabled"; }; @@ -1096,7 +1105,7 @@ #size-cells = <0>; ti,hwmods = "mcspi4"; ti,spi-num-cs = <1>; - dmas = <&sdma 70>, <&sdma 71>; + dmas = <&sdma_xbar 70>, <&sdma_xbar 71>; dma-names = "tx0", "rx0"; status = "disabled"; }; diff --git a/arch/arm/boot/dts/dra72-evm.dts b/arch/arm/boot/dts/dra72-evm.dts index 4e1b605..2314e3f 100644 --- a/arch/arm/boot/dts/dra72-evm.dts +++ b/arch/arm/boot/dts/dra72-evm.dts @@ -343,6 +343,12 @@ interrupts = <11 IRQ_TYPE_EDGE_FALLING>; interrupt-controller; #interrupt-cells = <2>; + + cpsw_sel_s0 { + gpio-hog; + gpios = <4 GPIO_ACTIVE_HIGH>; + output-low; + }; }; }; @@ -571,9 +577,10 @@ pinctrl-names = "default", "sleep"; pinctrl-0 = <&cpsw_default>; pinctrl-1 = <&cpsw_sleep>; + slaves = <1>; }; -&cpsw_emac1 { +&cpsw_emac0 { phy_id = <&davinci_mdio>, <3>; phy-mode = "rgmii"; }; @@ -582,7 +589,6 @@ pinctrl-names = "default", "sleep"; pinctrl-0 = <&davinci_mdio_default>; pinctrl-1 = <&davinci_mdio_sleep>; - active_slave = <1>; }; &dcan1 { diff --git a/arch/arm/boot/dts/omap3-overo-base.dtsi b/arch/arm/boot/dts/omap3-overo-base.dtsi index 18e1649..28430f1 100644 --- a/arch/arm/boot/dts/omap3-overo-base.dtsi +++ b/arch/arm/boot/dts/omap3-overo-base.dtsi @@ -218,3 +218,58 @@ pinctrl-0 = <&uart2_pins>; }; +&mcbsp2 { + status = "okay"; +}; + +&gpmc { + ranges = <0 0 0x00000000 0x20000000>; + + nand@0,0 { + linux,mtd-name= "micron,mt29c4g96maz"; + reg = <0 0 0>; + nand-bus-width = <16>; + gpmc,device-width = <2>; + ti,nand-ecc-opt = "bch8"; + + gpmc,sync-clk-ps = <0>; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <44>; + gpmc,cs-wr-off-ns = <44>; + gpmc,adv-on-ns = <6>; + gpmc,adv-rd-off-ns = <34>; + gpmc,adv-wr-off-ns = <44>; + gpmc,we-off-ns = <40>; + gpmc,oe-off-ns = <54>; + gpmc,access-ns = <64>; + gpmc,rd-cycle-ns = <82>; + gpmc,wr-cycle-ns = <82>; + gpmc,wr-access-ns = <40>; + gpmc,wr-data-mux-bus-ns = <0>; + + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "SPL"; + reg = <0 0x80000>; /* 512KiB */ + }; + partition@80000 { + label = "U-Boot"; + reg = <0x80000 0x1C0000>; /* 1792KiB */ + }; + partition@1c0000 { + label = "Environment"; + reg = <0x240000 0x40000>; /* 256KiB */ + }; + partition@280000 { + label = "Kernel"; + reg = <0x280000 0x800000>; /* 8192KiB */ + }; + partition@780000 { + label = "Filesystem"; + reg = <0xA80000 0>; + /* HACK: MTDPART_SIZ_FULL=0 so fill to end */ + }; + }; +}; diff --git a/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi b/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi index 233c69e..b874eb7 100644 --- a/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi +++ b/arch/arm/boot/dts/omap3-overo-common-lcd35.dtsi @@ -62,6 +62,7 @@ OMAP3_CORE1_IOPAD(0x21ca, PIN_INPUT | MUX_MODE0) /* mcspi1_simo.mcspi1_simo */ OMAP3_CORE1_IOPAD(0x21cc, PIN_INPUT | MUX_MODE0) /* mcspi1_somi.mcspi1_somi */ OMAP3_CORE1_IOPAD(0x21ce, PIN_INPUT | MUX_MODE0) /* mcspi1_cs0.mcspi1_cs0 */ + OMAP3_CORE1_IOPAD(0x21d0, PIN_INPUT | MUX_MODE0) /* mcspi1_cs1.mcspi1_cs1 */ >; }; @@ -123,7 +124,7 @@ label = "lcd"; reg = <1>; /* CS1 */ - spi-max-frequency = <10000000>; + spi-max-frequency = <500000>; spi-cpol; spi-cpha; diff --git a/arch/arm/boot/dts/omap3-overo-palo35-common.dtsi b/arch/arm/boot/dts/omap3-overo-palo35-common.dtsi new file mode 100644 index 0000000..680d726 --- /dev/null +++ b/arch/arm/boot/dts/omap3-overo-palo35-common.dtsi @@ -0,0 +1,53 @@ +/* + * Copyright (C) 2015 Ash Charles, Gumstix Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * Palo35 expansion board is manufactured by Gumstix Inc. + */ + +#include "omap3-overo-common-peripherals.dtsi" +#include "omap3-overo-common-lcd35.dtsi" + +#include <dt-bindings/input/input.h> + +/ { + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins>; + heartbeat { + label = "overo:red:gpio21"; + gpios = <&gpio1 21 GPIO_ACTIVE_LOW>; /* gpio_21 */ + linux,default-trigger = "heartbeat"; + }; + gpio22 { + label = "overo:blue:gpio22"; + gpios = <&gpio1 22 GPIO_ACTIVE_LOW>; /* gpio_22 */ + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&button_pins>; + #address-cells = <1>; + #size-cells = <0>; + button0@23 { + label = "button0"; + linux,code = <BTN_0>; + gpios = <&gpio1 23 GPIO_ACTIVE_LOW>; /* gpio_23 */ + gpio-key,wakeup; + }; + button1@14 { + label = "button1"; + linux,code = <BTN_1>; + gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; /* gpio_14 */ + gpio-key,wakeup; + }; + }; +}; diff --git a/arch/arm/boot/dts/omap3-overo-palo35.dts b/arch/arm/boot/dts/omap3-overo-palo35.dts new file mode 100644 index 0000000..e3e2bce6 --- /dev/null +++ b/arch/arm/boot/dts/omap3-overo-palo35.dts @@ -0,0 +1,37 @@ +/* + * Copyright (C) 2015 Ash Charles, Gumstix Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * Palo35 expansion board is manufactured by Gumstix Inc. + */ + +/dts-v1/; + +#include "omap3-overo.dtsi" +#include "omap3-overo-palo35-common.dtsi" + +/ { + model = "OMAP35xx Gumstix Overo on Palo35"; + compatible = "gumstix,omap3-overo-palo35", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3"; +}; + +&omap3_pmx_core2 { + led_pins: pinmux_led_pins { + pinctrl-single,pins = < + OMAP3430_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4) /* etk_d7.gpio_21 */ + OMAP3430_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4) /* etk_d8.gpio_22 */ + >; + }; + + button_pins: pinmux_button_pins { + pinctrl-single,pins = < + OMAP3430_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE4) /* etk_d9.gpio_23 */ + OMAP3430_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE4) /* etk_d0.gpio_14 */ + >; + }; +}; diff --git a/arch/arm/boot/dts/omap3-overo-storm-palo35.dts b/arch/arm/boot/dts/omap3-overo-storm-palo35.dts new file mode 100644 index 0000000..4e725d2 --- /dev/null +++ b/arch/arm/boot/dts/omap3-overo-storm-palo35.dts @@ -0,0 +1,37 @@ +/* + * Copyright (C) 2015 Ash Charles, Gumstix, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * Palo35 expansion board is manufactured by Gumstix Inc. + */ + +/dts-v1/; + +#include "omap3-overo-storm.dtsi" +#include "omap3-overo-palo35-common.dtsi" + +/ { + model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on Palo35"; + compatible = "gumstix,omap3-overo-palo35", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3"; +}; + +&omap3_pmx_core2 { + led_pins: pinmux_led_pins { + pinctrl-single,pins = < + OMAP3630_CORE2_IOPAD(0x25ea, PIN_OUTPUT | MUX_MODE4) /* etk_d7.gpio_21 */ + OMAP3630_CORE2_IOPAD(0x25ec, PIN_OUTPUT | MUX_MODE4) /* etk_d8.gpio_22 */ + >; + }; + + button_pins: pinmux_button_pins { + pinctrl-single,pins = < + OMAP3630_CORE2_IOPAD(0x25ee, PIN_INPUT | MUX_MODE4) /* etk_d9.gpio_23 */ + OMAP3630_CORE2_IOPAD(0x25dc, PIN_INPUT | MUX_MODE4) /* etk_d0.gpio_14 */ + >; + }; +}; diff --git a/arch/arm/boot/dts/omap3-overo-storm-tobiduo.dts b/arch/arm/boot/dts/omap3-overo-storm-tobiduo.dts new file mode 100644 index 0000000..da6afaf --- /dev/null +++ b/arch/arm/boot/dts/omap3-overo-storm-tobiduo.dts @@ -0,0 +1,21 @@ +/* + * Copyright (C) 2015 Ash Charles, Gumstix, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * TobiDuo expansion board is manufactured by Gumstix Inc. + */ + +/dts-v1/; + +#include "omap3-overo-storm.dtsi" +#include "omap3-overo-tobiduo-common.dtsi" + +/ { + model = "OMAP36xx/AM37xx/DM37xx Gumstix Overo on TobiDuo"; + compatible = "gumstix,omap3-overo-tobiduo", "gumstix,omap3-overo", "ti,omap36xx", "ti,omap3"; +}; diff --git a/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi b/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi new file mode 100644 index 0000000..334109e --- /dev/null +++ b/arch/arm/boot/dts/omap3-overo-tobiduo-common.dtsi @@ -0,0 +1,65 @@ +/* + * Copyright (C) 2015 Ash Charles, Gumstix, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * TobiDuo expansion board is manufactured by Gumstix Inc. + */ + +#include "omap3-overo-common-peripherals.dtsi" + +#include "omap-gpmc-smsc9221.dtsi" + +&gpmc { + ranges = <4 0 0x2b000000 0x1000000>, /* CS4 */ + <5 0 0x2c000000 0x1000000>; /* CS5 */ + + smsc1: ethernet@gpmc { + reg = <5 0 0xff>; + interrupt-parent = <&gpio6>; + interrupts = <16 IRQ_TYPE_LEVEL_LOW>; /* GPIO 176 */ + }; + + smsc2: ethernet@4,0 { + compatible = "smsc,lan9221","smsc,lan9115"; + bank-width = <2>; + + gpmc,mux-add-data; + gpmc,cs-on-ns = <0>; + gpmc,cs-rd-off-ns = <42>; + gpmc,cs-wr-off-ns = <36>; + gpmc,adv-on-ns = <6>; + gpmc,adv-rd-off-ns = <12>; + gpmc,adv-wr-off-ns = <12>; + gpmc,oe-on-ns = <0>; + gpmc,oe-off-ns = <42>; + gpmc,we-on-ns = <0>; + gpmc,we-off-ns = <36>; + gpmc,rd-cycle-ns = <60>; + gpmc,wr-cycle-ns = <54>; + gpmc,access-ns = <36>; + gpmc,page-burst-access-ns = <0>; + gpmc,bus-turnaround-ns = <0>; + gpmc,cycle2cycle-delay-ns = <0>; + gpmc,wr-data-mux-bus-ns = <18>; + gpmc,wr-access-ns = <42>; + gpmc,cycle2cycle-samecsen; + gpmc,cycle2cycle-diffcsen; + vddvario-supply = <&vddvario>; + vdd33a-supply = <&vdd33a>; + reg-io-width = <4>; + smsc,save-mac-address; + + reg = <4 0 0xff>; + interrupt-parent = <&gpio3>; + interrupts = <1 IRQ_TYPE_LEVEL_LOW>; /* GPIO 65 */ + }; +}; + +&lis33de { + status = "disabled"; +}; diff --git a/arch/arm/boot/dts/omap3-overo-tobiduo.dts b/arch/arm/boot/dts/omap3-overo-tobiduo.dts new file mode 100644 index 0000000..b9ce310 --- /dev/null +++ b/arch/arm/boot/dts/omap3-overo-tobiduo.dts @@ -0,0 +1,21 @@ +/* + * Copyright (C) 2015 Ash Charles, Gumstix, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * TobiDuo expansion board is manufactured by Gumstix Inc. + */ + +/dts-v1/; + +#include "omap3-overo.dtsi" +#include "omap3-overo-tobiduo-common.dtsi" + +/ { + model = "OMAP35xx Gumstix Overo on TobiDuo"; + compatible = "gumstix,omap3-overo-tobiduo", "gumstix,omap3-overo", "ti,omap3430", "ti,omap3"; +}; diff --git a/arch/arm/boot/dts/omap3-overo.dtsi b/arch/arm/boot/dts/omap3-overo.dtsi index 69ca7c4..932a02f 100644 --- a/arch/arm/boot/dts/omap3-overo.dtsi +++ b/arch/arm/boot/dts/omap3-overo.dtsi @@ -32,7 +32,3 @@ >; }; }; - -&mcbsp2 { - status = "okay"; -}; diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index ac521e7..b001f7a 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -324,10 +324,13 @@ CONFIG_SND_USB_AUDIO=m CONFIG_SND_SOC=m CONFIG_SND_EDMA_SOC=m CONFIG_SND_AM33XX_SOC_EVM=m +CONFIG_SND_DAVINCI_SOC_MCASP=m CONFIG_SND_OMAP_SOC=m CONFIG_SND_OMAP_SOC_OMAP_TWL4030=m CONFIG_SND_OMAP_SOC_OMAP_ABE_TWL6040=m CONFIG_SND_OMAP_SOC_OMAP3_PANDORA=m +CONFIG_SND_SIMPLE_CARD=m +CONFIG_SND_SOC_TLV320AIC3X=m CONFIG_HID_GENERIC=m CONFIG_USB_HIDDEV=y CONFIG_USB_KBD=m diff --git a/arch/arm/mach-omap2/pdata-quirks.c b/arch/arm/mach-omap2/pdata-quirks.c index 821171c..5417f2c 100644 --- a/arch/arm/mach-omap2/pdata-quirks.c +++ b/arch/arm/mach-omap2/pdata-quirks.c @@ -17,6 +17,7 @@ #include <linux/platform_data/pinctrl-single.h> #include <linux/platform_data/iommu-omap.h> +#include <linux/platform_data/wkup_m3.h> #include "common.h" #include "common-board-devices.h" @@ -278,6 +279,14 @@ static struct iommu_platform_data omap4_iommu_pdata = { }; #endif +#if defined(CONFIG_SOC_AM33XX) || defined(CONFIG_SOC_AM43XX) +static struct wkup_m3_platform_data wkup_m3_data = { + .reset_name = "wkup_m3", + .assert_reset = omap_device_assert_hardreset, + .deassert_reset = omap_device_deassert_hardreset, +}; +#endif + #ifdef CONFIG_SOC_OMAP5 static void __init omap5_uevm_legacy_init(void) { @@ -340,6 +349,10 @@ struct of_dev_auxdata omap_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("ti,am3517-emac", 0x5c000000, "davinci_emac.0", &am35xx_emac_pdata), #endif +#ifdef CONFIG_SOC_AM33XX + OF_DEV_AUXDATA("ti,am3352-wkup-m3", 0x44d00000, "44d00000.wkup_m3", + &wkup_m3_data), +#endif #ifdef CONFIG_ARCH_OMAP4 OF_DEV_AUXDATA("ti,omap4-padconf", 0x4a100040, "4a100040.pinmux", &pcs_pdata), OF_DEV_AUXDATA("ti,omap4-padconf", 0x4a31e040, "4a31e040.pinmux", &pcs_pdata), @@ -353,6 +366,8 @@ struct of_dev_auxdata omap_auxdata_lookup[] __initdata = { #endif #ifdef CONFIG_SOC_AM43XX OF_DEV_AUXDATA("ti,am437-padconf", 0x44e10800, "44e10800.pinmux", &pcs_pdata), + OF_DEV_AUXDATA("ti,am4372-wkup-m3", 0x44d00000, "44d00000.wkup_m3", + &wkup_m3_data), #endif #if defined(CONFIG_ARCH_OMAP4) || defined(CONFIG_SOC_OMAP5) OF_DEV_AUXDATA("ti,omap4-iommu", 0x4a066000, "4a066000.mmu", diff --git a/include/dt-bindings/pinctrl/dra.h b/include/dt-bindings/pinctrl/dra.h index 7448edf..4379e29 100644 --- a/include/dt-bindings/pinctrl/dra.h +++ b/include/dt-bindings/pinctrl/dra.h @@ -30,6 +30,26 @@ #define MUX_MODE14 0xe #define MUX_MODE15 0xf +/* Certain pins need virtual mode, but note: they may glitch */ +#define MUX_VIRTUAL_MODE0 (MODE_SELECT | (0x0 << 4)) +#define MUX_VIRTUAL_MODE1 (MODE_SELECT | (0x1 << 4)) +#define MUX_VIRTUAL_MODE2 (MODE_SELECT | (0x2 << 4)) +#define MUX_VIRTUAL_MODE3 (MODE_SELECT | (0x3 << 4)) +#define MUX_VIRTUAL_MODE4 (MODE_SELECT | (0x4 << 4)) +#define MUX_VIRTUAL_MODE5 (MODE_SELECT | (0x5 << 4)) +#define MUX_VIRTUAL_MODE6 (MODE_SELECT | (0x6 << 4)) +#define MUX_VIRTUAL_MODE7 (MODE_SELECT | (0x7 << 4)) +#define MUX_VIRTUAL_MODE8 (MODE_SELECT | (0x8 << 4)) +#define MUX_VIRTUAL_MODE9 (MODE_SELECT | (0x9 << 4)) +#define MUX_VIRTUAL_MODE10 (MODE_SELECT | (0xa << 4)) +#define MUX_VIRTUAL_MODE11 (MODE_SELECT | (0xb << 4)) +#define MUX_VIRTUAL_MODE12 (MODE_SELECT | (0xc << 4)) +#define MUX_VIRTUAL_MODE13 (MODE_SELECT | (0xd << 4)) +#define MUX_VIRTUAL_MODE14 (MODE_SELECT | (0xe << 4)) +#define MUX_VIRTUAL_MODE15 (MODE_SELECT | (0xf << 4)) + +#define MODE_SELECT (1 << 8) + #define PULL_ENA (0 << 16) #define PULL_DIS (1 << 16) #define PULL_UP (1 << 17) |