diff options
30 files changed, 145 insertions, 87 deletions
diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts b/arch/arm/boot/dts/sun4i-a10-a1000.dts index 3bb6369..532ab3b 100644 --- a/arch/arm/boot/dts/sun4i-a10-a1000.dts +++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts @@ -51,6 +51,8 @@ #include "sun4i-a10.dtsi" #include "sunxi-common-regulators.dtsi" +#include <dt-bindings/gpio/gpio.h> + / { model = "Mele A1000"; compatible = "mele,a1000", "allwinner,sun4i-a10"; @@ -77,7 +79,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ cd-inverted; status = "okay"; }; @@ -159,12 +161,12 @@ red { label = "a1000:red:usr"; - gpios = <&pio 7 10 0>; + gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; }; blue { label = "a1000:blue:usr"; - gpios = <&pio 7 20 0>; + gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; }; }; @@ -176,7 +178,7 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; enable-active-high; - gpio = <&pio 7 15 0>; + gpio = <&pio 7 15 GPIO_ACTIVE_HIGH>; }; reg_usb1_vbus: usb1-vbus { diff --git a/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts b/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts index b2b45c4..490b77c 100644 --- a/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts +++ b/arch/arm/boot/dts/sun4i-a10-ba10-tvbox.dts @@ -49,6 +49,8 @@ #include "sun4i-a10.dtsi" #include "sunxi-common-regulators.dtsi" +#include <dt-bindings/gpio/gpio.h> + / { model = "BA10 tvbox"; compatible = "allwinner,ba10-tvbox", "allwinner,sun4i-a10"; @@ -74,7 +76,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ cd-inverted; status = "okay"; }; @@ -140,7 +142,7 @@ }; reg_usb2_vbus: usb2-vbus { - gpio = <&pio 7 12 0>; + gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts index b920271..53f12b7 100644 --- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts +++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts @@ -50,6 +50,8 @@ #include "sun4i-a10.dtsi" #include "sunxi-common-regulators.dtsi" +#include <dt-bindings/gpio/gpio.h> + / { model = "Cubietech Cubieboard"; compatible = "cubietech,a10-cubieboard", "allwinner,sun4i-a10"; @@ -75,7 +77,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ cd-inverted; status = "okay"; }; @@ -163,12 +165,12 @@ blue { label = "cubieboard:blue:usr"; - gpios = <&pio 7 21 0>; /* LED1 */ + gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>; /* LED1 */ }; green { label = "cubieboard:green:usr"; - gpios = <&pio 7 20 0>; /* LED2 */ + gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; /* LED2 */ linux,default-trigger = "heartbeat"; }; }; diff --git a/arch/arm/boot/dts/sun4i-a10-hackberry.dts b/arch/arm/boot/dts/sun4i-a10-hackberry.dts index 0c6c81a..be1f29e 100644 --- a/arch/arm/boot/dts/sun4i-a10-hackberry.dts +++ b/arch/arm/boot/dts/sun4i-a10-hackberry.dts @@ -51,6 +51,8 @@ #include "sun4i-a10.dtsi" #include "sunxi-common-regulators.dtsi" +#include <dt-bindings/gpio/gpio.h> + / { model = "Miniand Hackberry"; compatible = "miniand,hackberry", "allwinner,sun4i-a10"; @@ -77,7 +79,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ cd-inverted; status = "okay"; }; @@ -157,7 +159,7 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; enable-active-high; - gpio = <&pio 7 19 0>; + gpio = <&pio 7 19 GPIO_ACTIVE_HIGH>; }; reg_usb1_vbus: usb1-vbus { @@ -166,7 +168,7 @@ reg_usb2_vbus: usb2-vbus { pinctrl-0 = <&usb2_vbus_pin_hackberry>; - gpio = <&pio 7 12 0>; + gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts index 5980ad0..4829143 100644 --- a/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts +++ b/arch/arm/boot/dts/sun4i-a10-inet97fv2.dts @@ -51,6 +51,8 @@ #include "sun4i-a10.dtsi" #include "sunxi-common-regulators.dtsi" +#include <dt-bindings/gpio/gpio.h> + / { model = "INet-97F Rev 02"; compatible = "primux,inet97fv2", "allwinner,sun4i-a10"; @@ -65,7 +67,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ cd-inverted; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts index e556399..1db02eb 100644 --- a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts +++ b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts @@ -51,6 +51,8 @@ #include "sun4i-a10.dtsi" #include "sunxi-common-regulators.dtsi" +#include <dt-bindings/gpio/gpio.h> + / { model = "PineRiver Mini X-Plus"; compatible = "pineriver,mini-xplus", "allwinner,sun4i-a10"; @@ -61,7 +63,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ cd-inverted; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts index 3f60794..5d9b868 100644 --- a/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts +++ b/arch/arm/boot/dts/sun4i-a10-olinuxino-lime.dts @@ -49,6 +49,8 @@ #include "sun4i-a10.dtsi" #include "sunxi-common-regulators.dtsi" +#include <dt-bindings/gpio/gpio.h> + / { model = "Olimex A10-OLinuXino-LIME"; compatible = "olimex,a10-olinuxino-lime", "allwinner,sun4i-a10"; @@ -74,7 +76,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ cd-inverted; status = "okay"; }; @@ -151,14 +153,14 @@ green { label = "a10-olinuxino-lime:green:usr"; - gpios = <&pio 7 2 0>; + gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; default-state = "on"; }; }; reg_ahci_5v: ahci-5v { pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>; - gpio = <&pio 2 3 0>; + gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun4i-a10-pcduino.dts b/arch/arm/boot/dts/sun4i-a10-pcduino.dts index 7367eff..48161ad 100644 --- a/arch/arm/boot/dts/sun4i-a10-pcduino.dts +++ b/arch/arm/boot/dts/sun4i-a10-pcduino.dts @@ -50,6 +50,8 @@ #include "sun4i-a10.dtsi" #include "sunxi-common-regulators.dtsi" +#include <dt-bindings/gpio/gpio.h> + / { model = "LinkSprite pcDuino"; compatible = "linksprite,a10-pcduino", "allwinner,sun4i-a10"; @@ -75,7 +77,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ cd-inverted; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts index dac9d49..f80d2fa 100644 --- a/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun5i-a10s-olinuxino-micro.dts @@ -50,6 +50,8 @@ /dts-v1/; #include "sun5i-a10s.dtsi" #include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> / { @@ -77,7 +79,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino_micro>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 6 1 0>; /* PG1 */ + cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ cd-inverted; status = "okay"; }; @@ -87,7 +89,7 @@ pinctrl-0 = <&mmc1_pins_a>, <&mmc1_cd_pin_olinuxino_micro>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 6 13 0>; /* PG13 */ + cd-gpios = <&pio 6 13 GPIO_ACTIVE_HIGH>; /* PG13 */ cd-inverted; status = "okay"; }; @@ -226,14 +228,14 @@ green { label = "a10s-olinuxino-micro:green:usr"; - gpios = <&pio 4 3 0>; + gpios = <&pio 4 3 GPIO_ACTIVE_HIGH>; default-state = "on"; }; }; reg_usb1_vbus: usb1-vbus { pinctrl-0 = <&usb1_vbus_pin_olinuxino_m>; - gpio = <&pio 1 10 0>; + gpio = <&pio 1 10 GPIO_ACTIVE_HIGH>; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts b/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts index 3a0d9dc..da2d253 100644 --- a/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts +++ b/arch/arm/boot/dts/sun5i-a10s-r7-tv-dongle.dts @@ -49,6 +49,8 @@ #include "sun5i-a10s.dtsi" #include "sunxi-common-regulators.dtsi" +#include <dt-bindings/gpio/gpio.h> + / { model = "R7 A10s hdmi tv-stick"; compatible = "allwinner,r7-tv-dongle", "allwinner,sun5i-a10s"; @@ -59,7 +61,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_r7>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 6 1 0>; /* PG1 */ + cd-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */ cd-inverted; status = "okay"; }; @@ -123,14 +125,14 @@ green { label = "r7-tv-dongle:green:usr"; - gpios = <&pio 1 2 0>; + gpios = <&pio 1 2 GPIO_ACTIVE_HIGH>; default-state = "on"; }; }; reg_usb1_vbus: usb1-vbus { pinctrl-0 = <&usb1_vbus_pin_r7>; - gpio = <&pio 6 13 0>; + gpio = <&pio 6 13 GPIO_ACTIVE_HIGH>; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts b/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts index ca6b6dd..bccc1bc 100644 --- a/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts +++ b/arch/arm/boot/dts/sun5i-a13-hsg-h702.dts @@ -49,6 +49,8 @@ #include "sun5i-a13.dtsi" #include "sunxi-common-regulators.dtsi" +#include <dt-bindings/gpio/gpio.h> + / { model = "HSG H702"; compatible = "hsg,h702", "allwinner,sun5i-a13"; @@ -59,7 +61,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_h702>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 6 0 0>; /* PG0 */ + cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */ cd-inverted; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts index 729f02d..c301807 100644 --- a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts @@ -50,6 +50,8 @@ #include "sun5i-a13.dtsi" #include "sunxi-common-regulators.dtsi" +#include <dt-bindings/gpio/gpio.h> + / { model = "Olimex A13-Olinuxino Micro"; compatible = "olimex,a13-olinuxino-micro", "allwinner,sun5i-a13"; @@ -60,7 +62,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxinom>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 6 0 0>; /* PG0 */ + cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */ cd-inverted; status = "okay"; }; @@ -133,14 +135,14 @@ power { label = "a13-olinuxino-micro:green:power"; - gpios = <&pio 6 9 0>; + gpios = <&pio 6 9 GPIO_ACTIVE_HIGH>; default-state = "on"; }; }; reg_usb1_vbus: usb1-vbus { pinctrl-0 = <&usb1_vbus_pin_olinuxinom>; - gpio = <&pio 6 11 0>; + gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts index 529ff27..e28a076 100644 --- a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts +++ b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts @@ -50,6 +50,8 @@ /dts-v1/; #include "sun5i-a13.dtsi" #include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> / { @@ -62,7 +64,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_olinuxino>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 6 0 0>; /* PG0 */ + cd-gpios = <&pio 6 0 GPIO_ACTIVE_HIGH>; /* PG0 */ cd-inverted; status = "okay"; }; @@ -174,14 +176,14 @@ pinctrl-0 = <&led_pins_olinuxino>; power { - gpios = <&pio 6 9 0>; + gpios = <&pio 6 9 GPIO_ACTIVE_HIGH>; default-state = "on"; }; }; reg_usb1_vbus: usb1-vbus { pinctrl-0 = <&usb1_vbus_pin_olinuxino>; - gpio = <&pio 6 11 0>; + gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts b/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts index 42a11f4..0d86e8c 100644 --- a/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts +++ b/arch/arm/boot/dts/sun6i-a31-app4-evb1.dts @@ -51,6 +51,8 @@ #include "sun6i-a31.dtsi" #include "sunxi-common-regulators.dtsi" +#include <dt-bindings/gpio/gpio.h> + / { model = "Allwinner A31 APP4 EVB1 Evaluation Board"; compatible = "allwinner,app4-evb1", "allwinner,sun6i-a31"; @@ -87,7 +89,7 @@ reg_usb1_vbus: usb1-vbus { pinctrl-0 = <&usb1_vbus_pin_a>; - gpio = <&pio 7 27 0>; + gpio = <&pio 7 27 GPIO_ACTIVE_HIGH>; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/sun6i-a31-colombus.dts b/arch/arm/boot/dts/sun6i-a31-colombus.dts index 2e5bcaf..deab8f3 100644 --- a/arch/arm/boot/dts/sun6i-a31-colombus.dts +++ b/arch/arm/boot/dts/sun6i-a31-colombus.dts @@ -51,6 +51,8 @@ #include "sun6i-a31.dtsi" #include "sunxi-common-regulators.dtsi" +#include <dt-bindings/gpio/gpio.h> + / { model = "WITS A31 Colombus Evaluation Board"; compatible = "wits,colombus", "allwinner,sun6i-a31"; @@ -65,7 +67,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_colombus>; vmmc-supply = <®_vcc3v0>; bus-width = <4>; - cd-gpios = <&pio 0 8 0>; /* PA8 */ + cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */ cd-inverted; status = "okay"; }; @@ -127,7 +129,7 @@ reg_usb2_vbus: usb2-vbus { pinctrl-names = "default"; pinctrl-0 = <&usb2_vbus_pin_colombus>; - gpio = <&pio 7 24 0>; + gpio = <&pio 7 24 GPIO_ACTIVE_HIGH>; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts index a3bf209..7364d22 100644 --- a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts +++ b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts @@ -51,6 +51,8 @@ #include "sun6i-a31.dtsi" #include "sunxi-common-regulators.dtsi" +#include <dt-bindings/gpio/gpio.h> + / { model = "Merrii A31 Hummingbird"; compatible = "merrii,a31-hummingbird", "allwinner,sun6i-a31"; @@ -65,7 +67,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_hummingbird>; vmmc-supply = <®_vcc3v0>; bus-width = <4>; - cd-gpios = <&pio 0 8 0>; /* PA8 */ + cd-gpios = <&pio 0 8 GPIO_ACTIVE_HIGH>; /* PA8 */ cd-inverted; status = "okay"; }; @@ -139,7 +141,7 @@ pinctrl-0 = <&gmac_pins_rgmii_a>; phy = <&phy1>; phy-mode = "rgmii"; - snps,reset-gpio = <&pio 0 21 0>; + snps,reset-gpio = <&pio 0 21 GPIO_ACTIVE_HIGH>; snps,reset-active-low; snps,reset-delays-us = <0 10000 30000>; status = "okay"; @@ -152,7 +154,7 @@ reg_usb1_vbus: usb1-vbus { pinctrl-0 = <&usb1_vbus_pin_a>; - gpio = <&pio 7 24 0>; /* PH24 */ + gpio = <&pio 7 24 GPIO_ACTIVE_HIGH>; /* PH24 */ status = "okay"; }; }; diff --git a/arch/arm/boot/dts/sun6i-a31-m9.dts b/arch/arm/boot/dts/sun6i-a31-m9.dts index 74d4a23..8018baa 100644 --- a/arch/arm/boot/dts/sun6i-a31-m9.dts +++ b/arch/arm/boot/dts/sun6i-a31-m9.dts @@ -49,6 +49,8 @@ #include "sun6i-a31.dtsi" #include "sunxi-common-regulators.dtsi" +#include <dt-bindings/gpio/gpio.h> + / { model = "Mele M9 / A1000G Quad top set box"; compatible = "mele,m9", "allwinner,sun6i-a31"; @@ -63,7 +65,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_m9>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 22 0>; /* PH22 */ + cd-gpios = <&pio 7 22 GPIO_ACTIVE_HIGH>; /* PH22 */ cd-inverted; status = "okay"; }; @@ -136,14 +138,14 @@ blue { label = "m9:blue:usr"; - gpios = <&pio 7 13 0>; + gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; }; }; reg_usb1_vbus: usb1-vbus { pinctrl-names = "default"; pinctrl-0 = <&usb1_vbus_pin_m9>; - gpio = <&pio 2 27 0>; + gpio = <&pio 2 27 GPIO_ACTIVE_HIGH>; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/sun7i-a20-bananapi.dts b/arch/arm/boot/dts/sun7i-a20-bananapi.dts index e9e9658..e273f0e 100644 --- a/arch/arm/boot/dts/sun7i-a20-bananapi.dts +++ b/arch/arm/boot/dts/sun7i-a20-bananapi.dts @@ -51,6 +51,8 @@ #include "sun7i-a20.dtsi" #include "sunxi-common-regulators.dtsi" +#include <dt-bindings/gpio/gpio.h> + / { model = "LeMaker Banana Pi"; compatible = "lemaker,bananapi", "allwinner,sun7i-a20"; @@ -67,7 +69,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapi>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 10 0>; /* PH10 */ + cd-gpios = <&pio 7 10 GPIO_ACTIVE_HIGH>; /* PH10 */ cd-inverted; status = "okay"; }; @@ -188,7 +190,7 @@ green { label = "bananapi:green:usr"; - gpios = <&pio 7 24 0>; + gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>; }; }; @@ -209,6 +211,6 @@ regulator-max-microvolt = <3300000>; startup-delay-us = <100000>; enable-active-high; - gpio = <&pio 7 23 0>; + gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>; }; }; diff --git a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts index 809d448..27ca1a1 100644 --- a/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts +++ b/arch/arm/boot/dts/sun7i-a20-cubieboard2.dts @@ -15,6 +15,8 @@ #include "sun7i-a20.dtsi" #include "sunxi-common-regulators.dtsi" +#include <dt-bindings/gpio/gpio.h> + / { model = "Cubietech Cubieboard2"; compatible = "cubietech,cubieboard2", "allwinner,sun7i-a20"; @@ -25,7 +27,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ cd-inverted; status = "okay"; }; @@ -120,12 +122,12 @@ blue { label = "cubieboard2:blue:usr"; - gpios = <&pio 7 21 0>; + gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>; }; green { label = "cubieboard2:green:usr"; - gpios = <&pio 7 20 0>; + gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; }; }; diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts index 9812a3a..a6e88f8 100644 --- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts +++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts @@ -15,6 +15,8 @@ #include "sun7i-a20.dtsi" #include "sunxi-common-regulators.dtsi" +#include <dt-bindings/gpio/gpio.h> + / { model = "Cubietech Cubietruck"; compatible = "cubietech,cubietruck", "allwinner,sun7i-a20"; @@ -25,7 +27,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ cd-inverted; status = "okay"; }; @@ -168,34 +170,34 @@ blue { label = "cubietruck:blue:usr"; - gpios = <&pio 7 21 0>; + gpios = <&pio 7 21 GPIO_ACTIVE_HIGH>; }; orange { label = "cubietruck:orange:usr"; - gpios = <&pio 7 20 0>; + gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; }; white { label = "cubietruck:white:usr"; - gpios = <&pio 7 11 0>; + gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; }; green { label = "cubietruck:green:usr"; - gpios = <&pio 7 7 0>; + gpios = <&pio 7 7 GPIO_ACTIVE_HIGH>; }; }; reg_ahci_5v: ahci-5v { pinctrl-0 = <&ahci_pwr_pin_cubietruck>; - gpio = <&pio 7 12 0>; + gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>; status = "okay"; }; reg_usb0_vbus: usb0-vbus { pinctrl-0 = <&usb0_vbus_pin_a>; - gpio = <&pio 7 17 0>; + gpio = <&pio 7 17 GPIO_ACTIVE_HIGH>; status = "okay"; }; @@ -215,6 +217,6 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; enable-active-high; - gpio = <&pio 7 9 0>; + gpio = <&pio 7 9 GPIO_ACTIVE_HIGH>; }; }; diff --git a/arch/arm/boot/dts/sun7i-a20-hummingbird.dts b/arch/arm/boot/dts/sun7i-a20-hummingbird.dts index add6d95..3b8bd22 100644 --- a/arch/arm/boot/dts/sun7i-a20-hummingbird.dts +++ b/arch/arm/boot/dts/sun7i-a20-hummingbird.dts @@ -15,6 +15,8 @@ #include "sun7i-a20.dtsi" #include "sunxi-common-regulators.dtsi" +#include <dt-bindings/gpio/gpio.h> + / { model = "Merrii A20 Hummingbird"; compatible = "merrii,a20-hummingbird", "allwinner,sun7i-a20"; @@ -25,7 +27,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; vmmc-supply = <®_vcc3v0>; bus-width = <4>; - cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ cd-inverted; status = "okay"; }; @@ -184,7 +186,7 @@ phy-mode = "rgmii"; phy-supply = <®_gmac_vdd>; /* phy reset config */ - snps,reset-gpio = <&pio 0 17 0>; /* PA17 */ + snps,reset-gpio = <&pio 0 17 GPIO_ACTIVE_HIGH>; /* PA17 */ snps,reset-active-low; /* wait 1s after reset, otherwise fail to read phy id */ snps,reset-delays-us = <0 10000 1000000>; @@ -198,13 +200,13 @@ reg_ahci_5v: ahci-5v { pinctrl-0 = <&ahci_pwr_pin_a20_hummingbird>; - gpio = <&pio 7 15 0>; /* PH15 */ + gpio = <&pio 7 15 GPIO_ACTIVE_HIGH>; /* PH15 */ status = "okay"; }; reg_usb1_vbus: usb1-vbus { pinctrl-0 = <&usb1_vbus_pin_a20_hummingbird>; - gpio = <&pio 7 2 0>; /* PH2 */ + gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>; /* PH2 */ status = "okay"; }; @@ -220,7 +222,7 @@ regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; enable-active-high; - gpio = <&pio 7 9 0>; /* PH9 */ + gpio = <&pio 7 9 GPIO_ACTIVE_HIGH>; /* PH9 */ }; reg_gmac_vdd: gmac_vdd { @@ -231,6 +233,6 @@ regulator-min-microvolt = <3000000>; regulator-max-microvolt = <3000000>; enable-active-high; - gpio = <&pio 7 16 0>; /* PH16 */ + gpio = <&pio 7 16 GPIO_ACTIVE_HIGH>; /* PH16 */ }; }; diff --git a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts b/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts index 780f1aa..a422f19 100644 --- a/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts +++ b/arch/arm/boot/dts/sun7i-a20-i12-tvbox.dts @@ -49,6 +49,8 @@ #include "sun7i-a20.dtsi" #include "sunxi-common-regulators.dtsi" +#include <dt-bindings/gpio/gpio.h> + / { model = "I12 / Q5 / QT840A A20 tvbox"; compatible = "allwinner,i12-tvbox", "allwinner,sun7i-a20"; @@ -59,7 +61,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ cd-inverted; status = "okay"; }; @@ -179,12 +181,12 @@ red { label = "i12_tvbox:red:usr"; - gpios = <&pio 7 9 1>; + gpios = <&pio 7 9 GPIO_ACTIVE_LOW>; }; blue { label = "i12_tvbox:blue:usr"; - gpios = <&pio 7 20 0>; + gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; }; }; @@ -204,7 +206,7 @@ regulator-min-microvolt = <3300000>; regulator-max-microvolt = <3300000>; enable-active-high; - gpio = <&pio 7 2 0>; + gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>; }; reg_vmmc3_io: vmmc3-io { @@ -217,7 +219,7 @@ /* This controls VCC-PI, must be always on! */ regulator-always-on; enable-active-high; - gpio = <&pio 7 12 0>; + gpio = <&pio 7 12 GPIO_ACTIVE_HIGH>; }; reg_gmac_3v3: gmac-3v3 { @@ -229,6 +231,6 @@ regulator-max-microvolt = <3300000>; startup-delay-us = <50000>; enable-active-high; - gpio = <&pio 7 21 0>; + gpio = <&pio 7 21 GPIO_ACTIVE_HIGH>; }; }; diff --git a/arch/arm/boot/dts/sun7i-a20-m3.dts b/arch/arm/boot/dts/sun7i-a20-m3.dts index 8204623..3e40ae7 100644 --- a/arch/arm/boot/dts/sun7i-a20-m3.dts +++ b/arch/arm/boot/dts/sun7i-a20-m3.dts @@ -51,6 +51,8 @@ #include "sun7i-a20.dtsi" #include "sunxi-common-regulators.dtsi" +#include <dt-bindings/gpio/gpio.h> + / { model = "Mele M3"; compatible = "mele,m3", "allwinner,sun7i-a20"; @@ -61,7 +63,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ cd-inverted; status = "okay"; }; @@ -154,7 +156,7 @@ blue { label = "m3:blue:usr"; - gpios = <&pio 7 20 0>; + gpios = <&pio 7 20 GPIO_ACTIVE_HIGH>; }; }; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts index 996da8b..0423b1c 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime.dts @@ -52,6 +52,8 @@ #include "sun7i-a20.dtsi" #include "sunxi-common-regulators.dtsi" +#include <dt-bindings/gpio/gpio.h> + / { model = "Olimex A20-OLinuXino-LIME"; compatible = "olimex,a20-olinuxino-lime", "allwinner,sun7i-a20"; @@ -62,7 +64,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ cd-inverted; status = "okay"; }; @@ -152,14 +154,14 @@ green { label = "a20-olinuxino-lime:green:usr"; - gpios = <&pio 7 2 0>; + gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; default-state = "on"; }; }; reg_ahci_5v: ahci-5v { pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>; - gpio = <&pio 2 3 0>; + gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts index 5fda1e0..ce1e28a 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-lime2.dts @@ -49,6 +49,8 @@ #include "sun7i-a20.dtsi" #include "sunxi-common-regulators.dtsi" +#include <dt-bindings/gpio/gpio.h> + / { model = "Olimex A20-OLinuXino-LIME2"; compatible = "olimex,a20-olinuxino-lime2", "allwinner,sun7i-a20"; @@ -59,7 +61,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ cd-inverted; status = "okay"; }; @@ -199,14 +201,14 @@ green { label = "a20-olinuxino-lime2:green:usr"; - gpios = <&pio 7 2 0>; + gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; default-state = "on"; }; }; reg_ahci_5v: ahci-5v { pinctrl-0 = <&ahci_pwr_pin_olinuxinolime>; - gpio = <&pio 2 3 0>; + gpio = <&pio 2 3 GPIO_ACTIVE_HIGH>; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts index c00badd..ae3dd39 100644 --- a/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts +++ b/arch/arm/boot/dts/sun7i-a20-olinuxino-micro.dts @@ -14,6 +14,8 @@ /dts-v1/; #include "sun7i-a20.dtsi" #include "sunxi-common-regulators.dtsi" + +#include <dt-bindings/gpio/gpio.h> #include <dt-bindings/input/input.h> / { @@ -37,7 +39,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ cd-inverted; status = "okay"; }; @@ -47,7 +49,7 @@ pinctrl-0 = <&mmc3_pins_a>, <&mmc3_cd_pin_olinuxinom>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 11 0>; /* PH11 */ + cd-gpios = <&pio 7 11 GPIO_ACTIVE_HIGH>; /* PH11 */ cd-inverted; status = "okay"; }; @@ -221,7 +223,7 @@ green { label = "a20-olinuxino-micro:green:usr"; - gpios = <&pio 7 2 0>; + gpios = <&pio 7 2 GPIO_ACTIVE_HIGH>; default-state = "on"; }; }; diff --git a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts index eb7b887..acce933 100644 --- a/arch/arm/boot/dts/sun7i-a20-pcduino3.dts +++ b/arch/arm/boot/dts/sun7i-a20-pcduino3.dts @@ -63,7 +63,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_reference_design>; vmmc-supply = <®_vcc3v3>; bus-width = <4>; - cd-gpios = <&pio 7 1 0>; /* PH1 */ + cd-gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */ cd-inverted; status = "okay"; }; @@ -204,7 +204,7 @@ }; reg_ahci_5v: ahci-5v { - gpio = <&pio 7 2 0>; + gpio = <&pio 7 2 GPIO_ACTIVE_HIGH>; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts index adc3a54..72ece67 100644 --- a/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts +++ b/arch/arm/boot/dts/sun8i-a23-ippo-q8h-v5.dts @@ -51,6 +51,8 @@ #include "sun8i-a23.dtsi" #include "sunxi-common-regulators.dtsi" +#include <dt-bindings/gpio/gpio.h> + / { model = "Ippo Q8H Dual Core Tablet (v5)"; compatible = "ippo,q8h-v5", "allwinner,sun8i-a23"; @@ -69,7 +71,7 @@ pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_q8h>; vmmc-supply = <®_vcc3v0>; bus-width = <4>; - cd-gpios = <&pio 1 4 0>; /* PB4 */ + cd-gpios = <&pio 1 4 GPIO_ACTIVE_HIGH>; /* PB4 */ cd-inverted; status = "okay"; }; diff --git a/arch/arm/boot/dts/sun9i-a80-optimus.dts b/arch/arm/boot/dts/sun9i-a80-optimus.dts index 7fe242a..8868c94 100644 --- a/arch/arm/boot/dts/sun9i-a80-optimus.dts +++ b/arch/arm/boot/dts/sun9i-a80-optimus.dts @@ -50,6 +50,8 @@ /dts-v1/; #include "sun9i-a80.dtsi" +#include <dt-bindings/gpio/gpio.h> + / { model = "Merrii A80 Optimus Board"; compatible = "merrii,a80-optimus", "allwinner,sun9i-a80"; @@ -106,14 +108,14 @@ led2 { label = "optimus:led2:usr"; - gpios = <&pio 7 1 0>; + gpios = <&pio 7 1 GPIO_ACTIVE_HIGH>; }; /* led3 is on PM15, in R_PIO */ led4 { label = "optimus:led4:usr"; - gpios = <&pio 7 0 0>; + gpios = <&pio 7 0 GPIO_ACTIVE_HIGH>; }; }; }; diff --git a/arch/arm/boot/dts/sunxi-common-regulators.dtsi b/arch/arm/boot/dts/sunxi-common-regulators.dtsi index d887663..d6b7983 100644 --- a/arch/arm/boot/dts/sunxi-common-regulators.dtsi +++ b/arch/arm/boot/dts/sunxi-common-regulators.dtsi @@ -47,6 +47,8 @@ * OTHER DEALINGS IN THE SOFTWARE. */ +#include <dt-bindings/gpio/gpio.h> + / { soc@01c00000 { pio: pinctrl@01c20800 { @@ -89,7 +91,7 @@ regulator-max-microvolt = <5000000>; regulator-boot-on; enable-active-high; - gpio = <&pio 1 8 0>; + gpio = <&pio 1 8 GPIO_ACTIVE_HIGH>; status = "disabled"; }; @@ -101,7 +103,7 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; enable-active-high; - gpio = <&pio 1 9 0>; + gpio = <&pio 1 9 GPIO_ACTIVE_HIGH>; status = "disabled"; }; @@ -113,7 +115,7 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; enable-active-high; - gpio = <&pio 7 6 0>; + gpio = <&pio 7 6 GPIO_ACTIVE_HIGH>; status = "disabled"; }; @@ -125,7 +127,7 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; enable-active-high; - gpio = <&pio 7 3 0>; + gpio = <&pio 7 3 GPIO_ACTIVE_HIGH>; status = "disabled"; }; |