diff options
| -rw-r--r-- | arch/arm/mach-pxa/Kconfig | 7 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/include/mach/arcom-pcmcia.h | 11 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/include/mach/viper.h | 2 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/viper.c | 20 | ||||
| -rw-r--r-- | arch/arm/mach-pxa/zeus.c | 29 | ||||
| -rw-r--r-- | drivers/pcmcia/Kconfig | 2 | ||||
| -rw-r--r-- | drivers/pcmcia/Makefile | 2 | ||||
| -rw-r--r-- | drivers/pcmcia/pxa2xx_base.c | 3 | ||||
| -rw-r--r-- | drivers/pcmcia/pxa2xx_viper.c | 119 |
9 files changed, 155 insertions, 40 deletions
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index fc553e8..e6d8e10 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -63,6 +63,7 @@ config ARCH_VIPER select HAVE_PWM select PXA_HAVE_BOARD_IRQS select PXA_HAVE_ISA_IRQS + select ARCOM_PCMCIA config MACH_ARCOM_ZEUS bool "Arcom/Eurotech ZEUS SBC" @@ -70,6 +71,7 @@ config MACH_ARCOM_ZEUS select ISA select PXA_HAVE_BOARD_IRQS select PXA_HAVE_ISA_IRQS + select ARCOM_PCMCIA config MACH_BALLOON3 bool "Balloon 3 board" @@ -186,6 +188,11 @@ config MACH_TRIZEPS_ANY endchoice +config ARCOM_PCMCIA + bool + help + Generic option for Arcom Viper/Zeus PCMCIA + config TRIZEPS_PCMCIA bool help diff --git a/arch/arm/mach-pxa/include/mach/arcom-pcmcia.h b/arch/arm/mach-pxa/include/mach/arcom-pcmcia.h new file mode 100644 index 0000000..d428be4 --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/arcom-pcmcia.h @@ -0,0 +1,11 @@ +#ifndef __ARCOM_PCMCIA_H +#define __ARCOM_PCMCIA_H + +struct arcom_pcmcia_pdata { + int cd_gpio; + int rdy_gpio; + int pwr_gpio; + void (*reset)(int state); +}; + +#endif diff --git a/arch/arm/mach-pxa/include/mach/viper.h b/arch/arm/mach-pxa/include/mach/viper.h index 10988c2..5f5fbf1 100644 --- a/arch/arm/mach-pxa/include/mach/viper.h +++ b/arch/arm/mach-pxa/include/mach/viper.h @@ -85,8 +85,6 @@ /* Interrupt and Configuration Register (VIPER_ICR) */ /* This is a write only register. Only CF_RST is used under Linux */ -extern void viper_cf_rst(int state); - #define VIPER_ICR_RETRIG (1 << 0) #define VIPER_ICR_AUTO_CLR (1 << 1) #define VIPER_ICR_R_DIS (1 << 2) diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c index cf0d71b..5352b4e 100644 --- a/arch/arm/mach-pxa/viper.c +++ b/arch/arm/mach-pxa/viper.c @@ -47,6 +47,7 @@ #include <mach/pxafb.h> #include <plat/i2c.h> #include <mach/regs-uart.h> +#include <mach/arcom-pcmcia.h> #include <mach/viper.h> #include <asm/setup.h> @@ -76,14 +77,28 @@ static void viper_icr_clear_bit(unsigned int bit) } /* This function is used from the pcmcia module to reset the CF */ -void viper_cf_rst(int state) +static void viper_cf_reset(int state) { if (state) viper_icr_set_bit(VIPER_ICR_CF_RST); else viper_icr_clear_bit(VIPER_ICR_CF_RST); } -EXPORT_SYMBOL(viper_cf_rst); + +static struct arcom_pcmcia_pdata viper_pcmcia_info = { + .cd_gpio = VIPER_CF_CD_GPIO, + .rdy_gpio = VIPER_CF_RDY_GPIO, + .pwr_gpio = VIPER_CF_POWER_GPIO, + .reset = viper_cf_reset, +}; + +static struct platform_device viper_pcmcia_device = { + .name = "viper-pcmcia", + .id = -1, + .dev = { + .platform_data = &viper_pcmcia_info, + }, +}; /* * The CPLD version register was not present on VIPER boards prior to @@ -685,6 +700,7 @@ static struct platform_device *viper_devs[] __initdata = { &viper_mtd_devices[0], &viper_mtd_devices[1], &viper_backlight_device, + &viper_pcmcia_device, }; static mfp_cfg_t viper_pin_config[] __initdata = { diff --git a/arch/arm/mach-pxa/zeus.c b/arch/arm/mach-pxa/zeus.c index ae1c3d2f..5b986a8 100644 --- a/arch/arm/mach-pxa/zeus.c +++ b/arch/arm/mach-pxa/zeus.c @@ -43,6 +43,7 @@ #include <mach/mfp-pxa27x.h> #include <mach/pm.h> #include <mach/audio.h> +#include <mach/arcom-pcmcia.h> #include <mach/zeus.h> #include "generic.h" @@ -428,6 +429,33 @@ static struct platform_device zeus_leds_device = { }, }; +static void zeus_cf_reset(int state) +{ + u16 cpld_state = __raw_readw(ZEUS_CPLD_CONTROL); + + if (state) + cpld_state |= ZEUS_CPLD_CONTROL_CF_RST; + else + cpld_state &= ~ZEUS_CPLD_CONTROL_CF_RST; + + __raw_writew(cpld_state, ZEUS_CPLD_CONTROL); +} + +static struct arcom_pcmcia_pdata zeus_pcmcia_info = { + .cd_gpio = ZEUS_CF_CD_GPIO, + .rdy_gpio = ZEUS_CF_RDY_GPIO, + .pwr_gpio = ZEUS_CF_PWEN_GPIO, + .reset = zeus_cf_reset, +}; + +static struct platform_device zeus_pcmcia_device = { + .name = "zeus-pcmcia", + .id = -1, + .dev = { + .platform_data = &zeus_pcmcia_info, + }, +}; + static struct platform_device *zeus_devices[] __initdata = { &zeus_serial_device, &zeus_mtd_devices[0], @@ -436,6 +464,7 @@ static struct platform_device *zeus_devices[] __initdata = { &zeus_sram_device, &pxa2xx_spi_ssp3_device, &zeus_leds_device, + &zeus_pcmcia_device, }; /* AC'97 */ diff --git a/drivers/pcmcia/Kconfig b/drivers/pcmcia/Kconfig index cd5082d..58bee55 100644 --- a/drivers/pcmcia/Kconfig +++ b/drivers/pcmcia/Kconfig @@ -208,7 +208,7 @@ config PCMCIA_PXA2XX depends on ARM && ARCH_PXA && PCMCIA depends on (ARCH_LUBBOCK || MACH_MAINSTONE || PXA_SHARPSL \ || MACH_ARMCORE || ARCH_PXA_PALM || TRIZEPS_PCMCIA \ - || ARCH_VIPER || ARCH_PXA_ESERIES || MACH_STARGATE2) + || ARCOM_PCMCIA || ARCH_PXA_ESERIES || MACH_STARGATE2) select PCMCIA_SOC_COMMON help Say Y here to include support for the PXA2xx PCMCIA controller diff --git a/drivers/pcmcia/Makefile b/drivers/pcmcia/Makefile index 3829383..83ff802 100644 --- a/drivers/pcmcia/Makefile +++ b/drivers/pcmcia/Makefile @@ -67,7 +67,7 @@ pxa2xx-obj-$(CONFIG_ARCH_LUBBOCK) += pxa2xx_lubbock_cs.o pxa2xx-obj-$(CONFIG_MACH_MAINSTONE) += pxa2xx_mainstone.o pxa2xx-obj-$(CONFIG_PXA_SHARPSL) += pxa2xx_sharpsl.o pxa2xx-obj-$(CONFIG_MACH_ARMCORE) += pxa2xx_cm_x2xx_cs.o -pxa2xx-obj-$(CONFIG_ARCH_VIPER) += pxa2xx_viper.o +pxa2xx-obj-$(CONFIG_ARCOM_PCMCIA) += pxa2xx_viper.o pxa2xx-obj-$(CONFIG_TRIZEPS_PCMCIA) += pxa2xx_trizeps4.o pxa2xx-obj-$(CONFIG_MACH_PALMTX) += pxa2xx_palmtx.o pxa2xx-obj-$(CONFIG_MACH_PALMTC) += pxa2xx_palmtc.o diff --git a/drivers/pcmcia/pxa2xx_base.c b/drivers/pcmcia/pxa2xx_base.c index 84dde776..87481ce 100644 --- a/drivers/pcmcia/pxa2xx_base.c +++ b/drivers/pcmcia/pxa2xx_base.c @@ -214,7 +214,8 @@ static void pxa2xx_configure_sockets(struct device *dev) MECR |= MECR_CIT; /* Set MECR:NOS (Number Of Sockets) */ - if ((ops->first + ops->nr) > 1 || machine_is_viper()) + if ((ops->first + ops->nr) > 1 || + machine_is_viper() || machine_is_arcom_zeus()) MECR |= MECR_NOS; else MECR &= ~MECR_NOS; diff --git a/drivers/pcmcia/pxa2xx_viper.c b/drivers/pcmcia/pxa2xx_viper.c index 27be2e15..a51f207 100644 --- a/drivers/pcmcia/pxa2xx_viper.c +++ b/drivers/pcmcia/pxa2xx_viper.c @@ -1,9 +1,8 @@ /* - * VIPER PCMCIA support + * Viper/Zeus PCMCIA support * Copyright 2004 Arcom Control Systems * * Maintained by Marc Zyngier <maz@misterjones.org> - * <marc.zyngier@altran.com> * * Based on: * iPAQ h2200 PCMCIA support @@ -26,37 +25,47 @@ #include <asm/irq.h> -#include <mach/viper.h> -#include <asm/mach-types.h> +#include <mach/arcom-pcmcia.h> #include "soc_common.h" #include "pxa2xx_base.h" +static struct platform_device *arcom_pcmcia_dev; + static struct pcmcia_irqs irqs[] = { - { 0, gpio_to_irq(VIPER_CF_CD_GPIO), "PCMCIA_CD" } + { + .sock = 0, + .str = "PCMCIA_CD", + }, }; +static inline struct arcom_pcmcia_pdata *viper_get_pdata(void) +{ + return arcom_pcmcia_dev->dev.platform_data; +} + static int viper_pcmcia_hw_init(struct soc_pcmcia_socket *skt) { + struct arcom_pcmcia_pdata *pdata = viper_get_pdata(); unsigned long flags; - skt->socket.pci_irq = gpio_to_irq(VIPER_CF_RDY_GPIO); + skt->socket.pci_irq = gpio_to_irq(pdata->rdy_gpio); + irqs[0].irq = gpio_to_irq(pdata->cd_gpio); - if (gpio_request(VIPER_CF_CD_GPIO, "CF detect")) + if (gpio_request(pdata->cd_gpio, "CF detect")) goto err_request_cd; - if (gpio_request(VIPER_CF_RDY_GPIO, "CF ready")) + if (gpio_request(pdata->rdy_gpio, "CF ready")) goto err_request_rdy; - if (gpio_request(VIPER_CF_POWER_GPIO, "CF power")) + if (gpio_request(pdata->pwr_gpio, "CF power")) goto err_request_pwr; local_irq_save(flags); - /* GPIO 82 is the CF power enable line. initially off */ - if (gpio_direction_output(VIPER_CF_POWER_GPIO, 0) || - gpio_direction_input(VIPER_CF_CD_GPIO) || - gpio_direction_input(VIPER_CF_RDY_GPIO)) { + if (gpio_direction_output(pdata->pwr_gpio, 0) || + gpio_direction_input(pdata->cd_gpio) || + gpio_direction_input(pdata->rdy_gpio)) { local_irq_restore(flags); goto err_dir; } @@ -66,13 +75,13 @@ static int viper_pcmcia_hw_init(struct soc_pcmcia_socket *skt) return soc_pcmcia_request_irqs(skt, irqs, ARRAY_SIZE(irqs)); err_dir: - gpio_free(VIPER_CF_POWER_GPIO); + gpio_free(pdata->pwr_gpio); err_request_pwr: - gpio_free(VIPER_CF_RDY_GPIO); + gpio_free(pdata->rdy_gpio); err_request_rdy: - gpio_free(VIPER_CF_CD_GPIO); + gpio_free(pdata->cd_gpio); err_request_cd: - printk(KERN_ERR "viper: Failed to setup PCMCIA GPIOs\n"); + dev_err(&arcom_pcmcia_dev->dev, "Failed to setup PCMCIA GPIOs\n"); return -1; } @@ -81,17 +90,21 @@ err_request_cd: */ static void viper_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt) { + struct arcom_pcmcia_pdata *pdata = viper_get_pdata(); + soc_pcmcia_free_irqs(skt, irqs, ARRAY_SIZE(irqs)); - gpio_free(VIPER_CF_POWER_GPIO); - gpio_free(VIPER_CF_RDY_GPIO); - gpio_free(VIPER_CF_CD_GPIO); + gpio_free(pdata->pwr_gpio); + gpio_free(pdata->rdy_gpio); + gpio_free(pdata->cd_gpio); } static void viper_pcmcia_socket_state(struct soc_pcmcia_socket *skt, struct pcmcia_state *state) { - state->detect = gpio_get_value(VIPER_CF_CD_GPIO) ? 0 : 1; - state->ready = gpio_get_value(VIPER_CF_RDY_GPIO) ? 1 : 0; + struct arcom_pcmcia_pdata *pdata = viper_get_pdata(); + + state->detect = !gpio_get_value(pdata->cd_gpio); + state->ready = !!gpio_get_value(pdata->rdy_gpio); state->bvd1 = 1; state->bvd2 = 1; state->wrprot = 0; @@ -102,20 +115,21 @@ static void viper_pcmcia_socket_state(struct soc_pcmcia_socket *skt, static int viper_pcmcia_configure_socket(struct soc_pcmcia_socket *skt, const socket_state_t *state) { + struct arcom_pcmcia_pdata *pdata = viper_get_pdata(); + /* Silently ignore Vpp, output enable, speaker enable. */ - viper_cf_rst(state->flags & SS_RESET); + pdata->reset(state->flags & SS_RESET); /* Apply socket voltage */ switch (state->Vcc) { case 0: - gpio_set_value(VIPER_CF_POWER_GPIO, 0); + gpio_set_value(pdata->pwr_gpio, 0); break; case 33: - gpio_set_value(VIPER_CF_POWER_GPIO, 1); + gpio_set_value(pdata->pwr_gpio, 1); break; default: - printk(KERN_ERR "%s: Unsupported Vcc:%d\n", - __func__, state->Vcc); + dev_err(&arcom_pcmcia_dev->dev, "Unsupported Vcc:%d\n", state->Vcc); return -1; } @@ -130,7 +144,7 @@ static void viper_pcmcia_socket_suspend(struct soc_pcmcia_socket *skt) { } -static struct pcmcia_low_level viper_pcmcia_ops __initdata = { +static struct pcmcia_low_level viper_pcmcia_ops = { .owner = THIS_MODULE, .hw_init = viper_pcmcia_hw_init, .hw_shutdown = viper_pcmcia_hw_shutdown, @@ -143,17 +157,25 @@ static struct pcmcia_low_level viper_pcmcia_ops __initdata = { static struct platform_device *viper_pcmcia_device; -static int __init viper_pcmcia_init(void) +static int viper_pcmcia_probe(struct platform_device *pdev) { int ret; - if (!machine_is_viper()) - return -ENODEV; + /* I can't imagine more than one device, but you never know... */ + if (arcom_pcmcia_dev) + return -EEXIST; + + if (!pdev->dev.platform_data) + return -EINVAL; viper_pcmcia_device = platform_device_alloc("pxa2xx-pcmcia", -1); if (!viper_pcmcia_device) return -ENOMEM; + arcom_pcmcia_dev = pdev; + + viper_pcmcia_device->dev.parent = &pdev->dev; + ret = platform_device_add_data(viper_pcmcia_device, &viper_pcmcia_ops, sizeof(viper_pcmcia_ops)); @@ -161,18 +183,49 @@ static int __init viper_pcmcia_init(void) if (!ret) ret = platform_device_add(viper_pcmcia_device); - if (ret) + if (ret) { platform_device_put(viper_pcmcia_device); + arcom_pcmcia_dev = NULL; + } return ret; } -static void __exit viper_pcmcia_exit(void) +static int viper_pcmcia_remove(struct platform_device *pdev) { platform_device_unregister(viper_pcmcia_device); + arcom_pcmcia_dev = NULL; + return 0; +} + +static struct platform_device_id viper_pcmcia_id_table[] = { + { .name = "viper-pcmcia", }, + { .name = "zeus-pcmcia", }, + { }, +}; + +static struct platform_driver viper_pcmcia_driver = { + .probe = viper_pcmcia_probe, + .remove = viper_pcmcia_remove, + .driver = { + .name = "arcom-pcmcia", + .owner = THIS_MODULE, + }, + .id_table = viper_pcmcia_id_table, +}; + +static int __init viper_pcmcia_init(void) +{ + return platform_driver_register(&viper_pcmcia_driver); +} + +static void __exit viper_pcmcia_exit(void) +{ + return platform_driver_unregister(&viper_pcmcia_driver); } module_init(viper_pcmcia_init); module_exit(viper_pcmcia_exit); +MODULE_DEVICE_TABLE(platform, viper_pcmcia_id_table); MODULE_LICENSE("GPL"); |