diff options
| -rw-r--r-- | Documentation/ibm-acpi.txt | 75 | ||||
| -rw-r--r-- | drivers/acpi/ibm_acpi.c | 2 |
2 files changed, 25 insertions, 52 deletions
diff --git a/Documentation/ibm-acpi.txt b/Documentation/ibm-acpi.txt index 71aa403..e50595b 100644 --- a/Documentation/ibm-acpi.txt +++ b/Documentation/ibm-acpi.txt @@ -30,9 +30,10 @@ detailed description): - ACPI sounds - temperature sensors - Experimental: embedded controller register dump - - Experimental: LCD brightness control - - Experimental: volume control + - LCD brightness control + - Volume control - Experimental: fan speed, fan enable/disable + - Experimental: WAN enable and disable A compatibility table by model and feature is maintained on the web site, http://ibm-acpi.sf.net/. I appreciate any success or failure @@ -52,40 +53,7 @@ Installation If you are compiling this driver as included in the Linux kernel sources, simply enable the CONFIG_ACPI_IBM option (Power Management / -ACPI / IBM ThinkPad Laptop Extras). The rest of this section describes -how to install this driver when downloaded from the web site. - -First, you need to get a kernel with ACPI support up and running. -Please refer to http://acpi.sourceforge.net/ for help with this -step. How successful you will be depends a lot on you ThinkPad model, -the kernel you are using and any additional patches applied. The -kernel provided with your distribution may not be good enough. I -needed to compile a 2.6.7 kernel with the 20040715 ACPI patch to get -ACPI working reliably on my ThinkPad X40. Old ThinkPad models may not -be supported at all. - -Assuming you have the basic ACPI support working (e.g. you can see the -/proc/acpi directory), follow the following steps to install this -driver: - - - unpack the archive: - - tar xzvf ibm-acpi-x.y.tar.gz; cd ibm-acpi-x.y - - - compile the driver: - - make - - - install the module in your kernel modules directory: - - make install - - - load the module: - - modprobe ibm_acpi - -After loading the module, check the "dmesg" output for any error messages. - +ACPI / IBM ThinkPad Laptop Extras). Features -------- @@ -523,13 +491,8 @@ registers contain the current battery capacity, etc. If you experiment with this, do send me your results (including some complete dumps with a description of the conditions when they were taken.) -EXPERIMENTAL: LCD brightness control -- /proc/acpi/ibm/brightness ------------------------------------------------------------------ - -This feature is marked EXPERIMENTAL because the implementation -directly accesses hardware registers and may not work as expected. USE -WITH CAUTION! To use this feature, you need to supply the -experimental=1 parameter when loading the module. +LCD brightness control -- /proc/acpi/ibm/brightness +--------------------------------------------------- This feature allows software control of the LCD brightness on ThinkPad models which don't have a hardware brightness slider. The available @@ -542,13 +505,8 @@ commands are: The <level> number range is 0 to 7, although not all of them may be distinct. The current brightness level is shown in the file. -EXPERIMENTAL: Volume control -- /proc/acpi/ibm/volume ------------------------------------------------------ - -This feature is marked EXPERIMENTAL because the implementation -directly accesses hardware registers and may not work as expected. USE -WITH CAUTION! To use this feature, you need to supply the -experimental=1 parameter when loading the module. +Volume control -- /proc/acpi/ibm/volume +--------------------------------------- This feature allows volume control on ThinkPad models which don't have a hardware volume knob. The available commands are: @@ -611,6 +569,23 @@ with the following command: echo 'level <level>' > /proc/acpi/ibm/thermal +EXPERIMENTAL: WAN -- /proc/acpi/ibm/wan +--------------------------------------- + +This feature is marked EXPERIMENTAL because the implementation +directly accesses hardware registers and may not work as expected. USE +WITH CAUTION! To use this feature, you need to supply the +experimental=1 parameter when loading the module. + +This feature shows the presence and current state of a WAN (Sierra +Wireless EV-DO) device. If WAN is installed, the following commands can +be used: + + echo enable > /proc/acpi/ibm/wan + echo disable > /proc/acpi/ibm/wan + +It was tested on a Lenovo Thinkpad X60. It should probably work on other +Thinkpad models which come with this module installed. Multiple Commands, Module Parameters ------------------------------------ diff --git a/drivers/acpi/ibm_acpi.c b/drivers/acpi/ibm_acpi.c index 15fc124..003a987 100644 --- a/drivers/acpi/ibm_acpi.c +++ b/drivers/acpi/ibm_acpi.c @@ -1702,13 +1702,11 @@ static struct ibm_struct ibms[] = { .name = "brightness", .read = brightness_read, .write = brightness_write, - .experimental = 1, }, { .name = "volume", .read = volume_read, .write = volume_write, - .experimental = 1, }, { .name = "fan", |