summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--MAINTAINERS1
-rw-r--r--drivers/spi/Kconfig4
-rw-r--r--drivers/spi/spi-bitbang.c27
-rw-r--r--drivers/spi/spi-gpio.c23
-rw-r--r--drivers/spi/spi-omap2-mcspi.c34
-rw-r--r--drivers/spi/spi-pxa2xx-pci.c133
-rw-r--r--drivers/spi/spi-pxa2xx.c263
-rw-r--r--drivers/spi/spi-s3c64xx.c2
-rw-r--r--include/linux/platform_data/spi-omap2-mcspi.h3
-rw-r--r--include/linux/pxa2xx_ssp.h9
-rw-r--r--include/linux/spi/pxa2xx_spi.h21
-rw-r--r--include/linux/spi/spi_gpio.h4
12 files changed, 148 insertions, 376 deletions
diff --git a/MAINTAINERS b/MAINTAINERS
index 212c255..1a747dd 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -7178,6 +7178,7 @@ F: drivers/clk/spear/
SPI SUBSYSTEM
M: Grant Likely <grant.likely@secretlab.ca>
+M: Mark Brown <broonie@opensource.wolfsonmicro.com>
L: spi-devel-general@lists.sourceforge.net
Q: http://patchwork.kernel.org/project/spi-devel-general/list/
T: git git://git.secretlab.ca/git/linux-2.6.git
diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig
index 2e188e1..a90393d 100644
--- a/drivers/spi/Kconfig
+++ b/drivers/spi/Kconfig
@@ -299,7 +299,7 @@ config SPI_PPC4xx
config SPI_PXA2XX
tristate "PXA2xx SSP SPI master"
- depends on (ARCH_PXA || (X86_32 && PCI)) && EXPERIMENTAL
+ depends on ARCH_PXA || PCI
select PXA_SSP if ARCH_PXA
help
This enables using a PXA2xx or Sodaville SSP port as a SPI master
@@ -307,7 +307,7 @@ config SPI_PXA2XX
additional documentation can be found a Documentation/spi/pxa2xx.
config SPI_PXA2XX_PCI
- def_bool SPI_PXA2XX && X86_32 && PCI
+ def_tristate SPI_PXA2XX && PCI
config SPI_RSPI
tristate "Renesas RSPI controller"
diff --git a/drivers/spi/spi-bitbang.c b/drivers/spi/spi-bitbang.c
index 61beaec..a63d7da 100644
--- a/drivers/spi/spi-bitbang.c
+++ b/drivers/spi/spi-bitbang.c
@@ -427,40 +427,41 @@ EXPORT_SYMBOL_GPL(spi_bitbang_transfer);
*/
int spi_bitbang_start(struct spi_bitbang *bitbang)
{
- int status;
+ struct spi_master *master = bitbang->master;
+ int status;
- if (!bitbang->master || !bitbang->chipselect)
+ if (!master || !bitbang->chipselect)
return -EINVAL;
INIT_WORK(&bitbang->work, bitbang_work);
spin_lock_init(&bitbang->lock);
INIT_LIST_HEAD(&bitbang->queue);
- if (!bitbang->master->mode_bits)
- bitbang->master->mode_bits = SPI_CPOL | SPI_CPHA | bitbang->flags;
+ if (!master->mode_bits)
+ master->mode_bits = SPI_CPOL | SPI_CPHA | bitbang->flags;
- if (!bitbang->master->transfer)
- bitbang->master->transfer = spi_bitbang_transfer;
+ if (!master->transfer)
+ master->transfer = spi_bitbang_transfer;
if (!bitbang->txrx_bufs) {
bitbang->use_dma = 0;
bitbang->txrx_bufs = spi_bitbang_bufs;
- if (!bitbang->master->setup) {
+ if (!master->setup) {
if (!bitbang->setup_transfer)
bitbang->setup_transfer =
spi_bitbang_setup_transfer;
- bitbang->master->setup = spi_bitbang_setup;
- bitbang->master->cleanup = spi_bitbang_cleanup;
+ master->setup = spi_bitbang_setup;
+ master->cleanup = spi_bitbang_cleanup;
}
- } else if (!bitbang->master->setup)
+ } else if (!master->setup)
return -EINVAL;
- if (bitbang->master->transfer == spi_bitbang_transfer &&
+ if (master->transfer == spi_bitbang_transfer &&
!bitbang->setup_transfer)
return -EINVAL;
/* this task is the only thing to touch the SPI bits */
bitbang->busy = 0;
bitbang->workqueue = create_singlethread_workqueue(
- dev_name(bitbang->master->dev.parent));
+ dev_name(master->dev.parent));
if (bitbang->workqueue == NULL) {
status = -EBUSY;
goto err1;
@@ -469,7 +470,7 @@ int spi_bitbang_start(struct spi_bitbang *bitbang)
/* driver may get busy before register() returns, especially
* if someone registered boardinfo for devices
*/
- status = spi_register_master(bitbang->master);
+ status = spi_register_master(master);
if (status < 0)
goto err2;
diff --git a/drivers/spi/spi-gpio.c b/drivers/spi/spi-gpio.c
index c7cf0b7..9ddef55 100644
--- a/drivers/spi/spi-gpio.c
+++ b/drivers/spi/spi-gpio.c
@@ -365,9 +365,26 @@ static int spi_gpio_probe_dt(struct platform_device *pdev)
if (!pdata)
return -ENOMEM;
- pdata->sck = of_get_named_gpio(np, "gpio-sck", 0);
- pdata->miso = of_get_named_gpio(np, "gpio-miso", 0);
- pdata->mosi = of_get_named_gpio(np, "gpio-mosi", 0);
+ ret = of_get_named_gpio(np, "gpio-sck", 0);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "gpio-sck property not found\n");
+ goto error_free;
+ }
+ pdata->sck = ret;
+
+ ret = of_get_named_gpio(np, "gpio-miso", 0);
+ if (ret < 0) {
+ dev_info(&pdev->dev, "gpio-miso property not found, switching to no-rx mode\n");
+ pdata->miso = SPI_GPIO_NO_MISO;
+ } else
+ pdata->miso = ret;
+
+ ret = of_get_named_gpio(np, "gpio-mosi", 0);
+ if (ret < 0) {
+ dev_info(&pdev->dev, "gpio-mosi property not found, switching to no-tx mode\n");
+ pdata->mosi = SPI_GPIO_NO_MOSI;
+ } else
+ pdata->mosi = ret;
ret = of_property_read_u32(np, "num-chipselects", &tmp);
if (ret < 0) {
diff --git a/drivers/spi/spi-omap2-mcspi.c b/drivers/spi/spi-omap2-mcspi.c
index 68446db..69945b0 100644
--- a/drivers/spi/spi-omap2-mcspi.c
+++ b/drivers/spi/spi-omap2-mcspi.c
@@ -927,6 +927,7 @@ static void omap2_mcspi_work(struct omap2_mcspi *mcspi, struct spi_message *m)
struct spi_device *spi;
struct spi_transfer *t = NULL;
+ struct spi_master *master;
int cs_active = 0;
struct omap2_mcspi_cs *cs;
struct omap2_mcspi_device_config *cd;
@@ -935,6 +936,7 @@ static void omap2_mcspi_work(struct omap2_mcspi *mcspi, struct spi_message *m)
u32 chconf;
spi = m->spi;
+ master = spi->master;
cs = spi->controller_state;
cd = spi->controller_data;
@@ -952,6 +954,14 @@ static void omap2_mcspi_work(struct omap2_mcspi *mcspi, struct spi_message *m)
if (!t->speed_hz && !t->bits_per_word)
par_override = 0;
}
+ if (cd && cd->cs_per_word) {
+ chconf = mcspi->ctx.modulctrl;
+ chconf &= ~OMAP2_MCSPI_MODULCTRL_SINGLE;
+ mcspi_write_reg(master, OMAP2_MCSPI_MODULCTRL, chconf);
+ mcspi->ctx.modulctrl =
+ mcspi_read_cs_reg(spi, OMAP2_MCSPI_MODULCTRL);
+ }
+
if (!cs_active) {
omap2_mcspi_force_cs(spi, 1);
@@ -1013,6 +1023,14 @@ static void omap2_mcspi_work(struct omap2_mcspi *mcspi, struct spi_message *m)
if (cs_active)
omap2_mcspi_force_cs(spi, 0);
+ if (cd && cd->cs_per_word) {
+ chconf = mcspi->ctx.modulctrl;
+ chconf |= OMAP2_MCSPI_MODULCTRL_SINGLE;
+ mcspi_write_reg(master, OMAP2_MCSPI_MODULCTRL, chconf);
+ mcspi->ctx.modulctrl =
+ mcspi_read_cs_reg(spi, OMAP2_MCSPI_MODULCTRL);
+ }
+
omap2_mcspi_set_enable(spi, 0);
m->status = status;
@@ -1020,7 +1038,7 @@ static void omap2_mcspi_work(struct omap2_mcspi *mcspi, struct spi_message *m)
}
static int omap2_mcspi_transfer_one_message(struct spi_master *master,
- struct spi_message *m)
+ struct spi_message *m)
{
struct omap2_mcspi *mcspi;
struct spi_transfer *t;
@@ -1041,7 +1059,7 @@ static int omap2_mcspi_transfer_one_message(struct spi_master *master,
|| (len && !(rx_buf || tx_buf))
|| (t->bits_per_word &&
( t->bits_per_word < 4
- || t->bits_per_word > 32))) {
+ || t->bits_per_word > 32))) {
dev_dbg(mcspi->dev, "transfer: %d Hz, %d %s%s, %d bpw\n",
t->speed_hz,
len,
@@ -1052,8 +1070,8 @@ static int omap2_mcspi_transfer_one_message(struct spi_master *master,
}
if (t->speed_hz && t->speed_hz < (OMAP2_MCSPI_MAX_FREQ >> 15)) {
dev_dbg(mcspi->dev, "speed_hz %d below minimum %d Hz\n",
- t->speed_hz,
- OMAP2_MCSPI_MAX_FREQ >> 15);
+ t->speed_hz,
+ OMAP2_MCSPI_MAX_FREQ >> 15);
return -EINVAL;
}
@@ -1099,7 +1117,7 @@ static int omap2_mcspi_master_setup(struct omap2_mcspi *mcspi)
return ret;
mcspi_write_reg(master, OMAP2_MCSPI_WAKEUPENABLE,
- OMAP2_MCSPI_WAKEUPENABLE_WKEN);
+ OMAP2_MCSPI_WAKEUPENABLE_WKEN);
ctx->wakeupenable = OMAP2_MCSPI_WAKEUPENABLE_WKEN;
omap2_mcspi_set_master_mode(master);
@@ -1228,7 +1246,7 @@ static int omap2_mcspi_probe(struct platform_device *pdev)
sprintf(dma_ch_name, "rx%d", i);
dma_res = platform_get_resource_byname(pdev, IORESOURCE_DMA,
- dma_ch_name);
+ dma_ch_name);
if (!dma_res) {
dev_dbg(&pdev->dev, "cannot get DMA RX channel\n");
status = -ENODEV;
@@ -1238,7 +1256,7 @@ static int omap2_mcspi_probe(struct platform_device *pdev)
mcspi->dma_channels[i].dma_rx_sync_dev = dma_res->start;
sprintf(dma_ch_name, "tx%d", i);
dma_res = platform_get_resource_byname(pdev, IORESOURCE_DMA,
- dma_ch_name);
+ dma_ch_name);
if (!dma_res) {
dev_dbg(&pdev->dev, "cannot get DMA TX channel\n");
status = -ENODEV;
@@ -1254,7 +1272,7 @@ static int omap2_mcspi_probe(struct platform_device *pdev)
pinctrl = devm_pinctrl_get_select_default(&pdev->dev);
if (IS_ERR(pinctrl))
dev_warn(&pdev->dev,
- "pins are not configured from the driver\n");
+ "pins are not configured from the driver\n");
pm_runtime_use_autosuspend(&pdev->dev);
pm_runtime_set_autosuspend_delay(&pdev->dev, SPI_AUTOSUSPEND_TIMEOUT);
diff --git a/drivers/spi/spi-pxa2xx-pci.c b/drivers/spi/spi-pxa2xx-pci.c
index cf95587..364964d 100644
--- a/drivers/spi/spi-pxa2xx-pci.c
+++ b/drivers/spi/spi-pxa2xx-pci.c
@@ -8,147 +8,58 @@
#include <linux/module.h>
#include <linux/spi/pxa2xx_spi.h>
-struct ce4100_info {
- struct ssp_device ssp;
- struct platform_device *spi_pdev;
-};
-
-static DEFINE_MUTEX(ssp_lock);
-static LIST_HEAD(ssp_list);
-
-struct ssp_device *pxa_ssp_request(int port, const char *label)
-{
- struct ssp_device *ssp = NULL;
-
- mutex_lock(&ssp_lock);
-
- list_for_each_entry(ssp, &ssp_list, node) {
- if (ssp->port_id == port && ssp->use_count == 0) {
- ssp->use_count++;
- ssp->label = label;
- break;
- }
- }
-
- mutex_unlock(&ssp_lock);
-
- if (&ssp->node == &ssp_list)
- return NULL;
-
- return ssp;
-}
-EXPORT_SYMBOL_GPL(pxa_ssp_request);
-
-void pxa_ssp_free(struct ssp_device *ssp)
-{
- mutex_lock(&ssp_lock);
- if (ssp->use_count) {
- ssp->use_count--;
- ssp->label = NULL;
- } else
- dev_err(&ssp->pdev->dev, "device already free\n");
- mutex_unlock(&ssp_lock);
-}
-EXPORT_SYMBOL_GPL(pxa_ssp_free);
-
static int ce4100_spi_probe(struct pci_dev *dev,
const struct pci_device_id *ent)
{
+ struct platform_device_info pi;
int ret;
- resource_size_t phys_beg;
- resource_size_t phys_len;
- struct ce4100_info *spi_info;
struct platform_device *pdev;
struct pxa2xx_spi_master spi_pdata;
struct ssp_device *ssp;
- ret = pci_enable_device(dev);
+ ret = pcim_enable_device(dev);
if (ret)
return ret;
- phys_beg = pci_resource_start(dev, 0);
- phys_len = pci_resource_len(dev, 0);
-
- if (!request_mem_region(phys_beg, phys_len,
- "CE4100 SPI")) {
- dev_err(&dev->dev, "Can't request register space.\n");
- ret = -EBUSY;
+ ret = pcim_iomap_regions(dev, 1 << 0, "PXA2xx SPI");
+ if (!ret)
return ret;
- }
- pdev = platform_device_alloc("pxa2xx-spi", dev->devfn);
- spi_info = kzalloc(sizeof(*spi_info), GFP_KERNEL);
- if (!pdev || !spi_info ) {
- ret = -ENOMEM;
- goto err_nomem;
- }
memset(&spi_pdata, 0, sizeof(spi_pdata));
spi_pdata.num_chipselect = dev->devfn;
- ret = platform_device_add_data(pdev, &spi_pdata, sizeof(spi_pdata));
- if (ret)
- goto err_nomem;
-
- pdev->dev.parent = &dev->dev;
- pdev->dev.of_node = dev->dev.of_node;
- ssp = &spi_info->ssp;
+ ssp = &spi_pdata.ssp;
ssp->phys_base = pci_resource_start(dev, 0);
- ssp->mmio_base = ioremap(phys_beg, phys_len);
+ ssp->mmio_base = pcim_iomap_table(dev)[0];
if (!ssp->mmio_base) {
- dev_err(&pdev->dev, "failed to ioremap() registers\n");
- ret = -EIO;
- goto err_nomem;
+ dev_err(&dev->dev, "failed to ioremap() registers\n");
+ return -EIO;
}
ssp->irq = dev->irq;
- ssp->port_id = pdev->id;
+ ssp->port_id = dev->devfn;
ssp->type = PXA25x_SSP;
- mutex_lock(&ssp_lock);
- list_add(&ssp->node, &ssp_list);
- mutex_unlock(&ssp_lock);
+ memset(&pi, 0, sizeof(pi));
+ pi.parent = &dev->dev;
+ pi.name = "pxa2xx-spi";
+ pi.id = ssp->port_id;
+ pi.data = &spi_pdata;
+ pi.size_data = sizeof(spi_pdata);
- pci_set_drvdata(dev, spi_info);
+ pdev = platform_device_register_full(&pi);
+ if (!pdev)
+ return -ENOMEM;
- ret = platform_device_add(pdev);
- if (ret)
- goto err_dev_add;
+ pci_set_drvdata(dev, pdev);
- return ret;
-
-err_dev_add:
- pci_set_drvdata(dev, NULL);
- mutex_lock(&ssp_lock);
- list_del(&ssp->node);
- mutex_unlock(&ssp_lock);
- iounmap(ssp->mmio_base);
-
-err_nomem:
- release_mem_region(phys_beg, phys_len);
- platform_device_put(pdev);
- kfree(spi_info);
- return ret;
+ return 0;
}
static void ce4100_spi_remove(struct pci_dev *dev)
{
- struct ce4100_info *spi_info;
- struct ssp_device *ssp;
-
- spi_info = pci_get_drvdata(dev);
- ssp = &spi_info->ssp;
- platform_device_unregister(spi_info->spi_pdev);
-
- iounmap(ssp->mmio_base);
- release_mem_region(pci_resource_start(dev, 0),
- pci_resource_len(dev, 0));
-
- mutex_lock(&ssp_lock);
- list_del(&ssp->node);
- mutex_unlock(&ssp_lock);
+ struct platform_device *pdev = pci_get_drvdata(dev);
- pci_set_drvdata(dev, NULL);
- pci_disable_device(dev);
- kfree(spi_info);
+ platform_device_unregister(pdev);
}
static DEFINE_PCI_DEVICE_TABLE(ce4100_spi_devices) = {
diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c
index 5c8c4f5..304cf6e 100644
--- a/drivers/spi/spi-pxa2xx.c
+++ b/drivers/spi/spi-pxa2xx.c
@@ -30,6 +30,7 @@
#include <linux/delay.h>
#include <linux/gpio.h>
#include <linux/slab.h>
+#include <linux/clk.h>
#include <asm/io.h>
#include <asm/irq.h>
@@ -47,7 +48,7 @@ MODULE_ALIAS("platform:pxa2xx-spi");
#define DMA_INT_MASK (DCSR_ENDINTR | DCSR_STARTINTR | DCSR_BUSERR)
#define RESET_DMA_CHANNEL (DCSR_NODESC | DMA_INT_MASK)
-#define IS_DMA_ALIGNED(x) ((((u32)(x)) & 0x07) == 0)
+#define IS_DMA_ALIGNED(x) IS_ALIGNED((unsigned long)(x), DMA_ALIGNMENT)
#define MAX_DMA_LEN 8191
#define DMA_ALIGNMENT 8
@@ -85,9 +86,6 @@ DEFINE_SSP_REG(SSPSP, 0x2c)
#define DONE_STATE ((void*)2)
#define ERROR_STATE ((void*)-1)
-#define QUEUE_RUNNING 0
-#define QUEUE_STOPPED 1
-
struct driver_data {
/* Driver model hookup */
struct platform_device *pdev;
@@ -117,13 +115,8 @@ struct driver_data {
u32 clear_sr;
u32 mask_sr;
- /* Driver message queue */
- struct workqueue_struct *workqueue;
- struct work_struct pump_messages;
- spinlock_t lock;
- struct list_head queue;
- int busy;
- int run;
+ /* Maximun clock rate */
+ unsigned long max_clk_rate;
/* Message Transfer pump */
struct tasklet_struct pump_transfers;
@@ -173,8 +166,6 @@ struct chip_data {
void (*cs_control)(u32 command);
};
-static void pump_messages(struct work_struct *work);
-
static void cs_assert(struct driver_data *drv_data)
{
struct chip_data *chip = drv_data->cur_chip;
@@ -444,15 +435,11 @@ static void unmap_dma_buffers(struct driver_data *drv_data)
static void giveback(struct driver_data *drv_data)
{
struct spi_transfer* last_transfer;
- unsigned long flags;
struct spi_message *msg;
- spin_lock_irqsave(&drv_data->lock, flags);
msg = drv_data->cur_msg;
drv_data->cur_msg = NULL;
drv_data->cur_transfer = NULL;
- queue_work(drv_data->workqueue, &drv_data->pump_messages);
- spin_unlock_irqrestore(&drv_data->lock, flags);
last_transfer = list_entry(msg->transfers.prev,
struct spi_transfer,
@@ -481,13 +468,7 @@ static void giveback(struct driver_data *drv_data)
*/
/* get a pointer to the next message, if any */
- spin_lock_irqsave(&drv_data->lock, flags);
- if (list_empty(&drv_data->queue))
- next_msg = NULL;
- else
- next_msg = list_entry(drv_data->queue.next,
- struct spi_message, queue);
- spin_unlock_irqrestore(&drv_data->lock, flags);
+ next_msg = spi_get_next_queued_message(drv_data->master);
/* see if the next and current messages point
* to the same chip
@@ -498,10 +479,7 @@ static void giveback(struct driver_data *drv_data)
cs_deassert(drv_data);
}
- msg->state = NULL;
- if (msg->complete)
- msg->complete(msg->context);
-
+ spi_finalize_current_message(drv_data->master);
drv_data->cur_chip = NULL;
}
@@ -917,9 +895,12 @@ static int set_dma_burst_and_threshold(struct chip_data *chip,
return retval;
}
-static unsigned int ssp_get_clk_div(struct ssp_device *ssp, int rate)
+static unsigned int ssp_get_clk_div(struct driver_data *drv_data, int rate)
{
- unsigned long ssp_clk = clk_get_rate(ssp->clk);
+ unsigned long ssp_clk = drv_data->max_clk_rate;
+ const struct ssp_device *ssp = drv_data->ssp;
+
+ rate = min_t(int, ssp_clk, rate);
if (ssp->type == PXA25x_SSP || ssp->type == CE4100_SSP)
return ((ssp_clk / (2 * rate) - 1) & 0xff) << 8;
@@ -934,7 +915,6 @@ static void pump_transfers(unsigned long data)
struct spi_transfer *transfer = NULL;
struct spi_transfer *previous = NULL;
struct chip_data *chip = NULL;
- struct ssp_device *ssp = drv_data->ssp;
void __iomem *reg = drv_data->ioaddr;
u32 clk_div = 0;
u8 bits = 0;
@@ -1031,7 +1011,7 @@ static void pump_transfers(unsigned long data)
if (transfer->bits_per_word)
bits = transfer->bits_per_word;
- clk_div = ssp_get_clk_div(ssp, speed);
+ clk_div = ssp_get_clk_div(drv_data, speed);
if (bits <= 8) {
drv_data->n_bytes = 1;
@@ -1176,31 +1156,12 @@ static void pump_transfers(unsigned long data)
write_SSCR1(cr1, reg);
}
-static void pump_messages(struct work_struct *work)
+static int pxa2xx_spi_transfer_one_message(struct spi_master *master,
+ struct spi_message *msg)
{
- struct driver_data *drv_data =
- container_of(work, struct driver_data, pump_messages);
- unsigned long flags;
-
- /* Lock queue and check for queue work */
- spin_lock_irqsave(&drv_data->lock, flags);
- if (list_empty(&drv_data->queue) || drv_data->run == QUEUE_STOPPED) {
- drv_data->busy = 0;
- spin_unlock_irqrestore(&drv_data->lock, flags);
- return;
- }
-
- /* Make sure we are not already running a message */
- if (drv_data->cur_msg) {
- spin_unlock_irqrestore(&drv_data->lock, flags);
- return;
- }
-
- /* Extract head of queue */
- drv_data->cur_msg = list_entry(drv_data->queue.next,
- struct spi_message, queue);
- list_del_init(&drv_data->cur_msg->queue);
+ struct driver_data *drv_data = spi_master_get_devdata(master);
+ drv_data->cur_msg = msg;
/* Initial message state*/
drv_data->cur_msg->state = START_STATE;
drv_data->cur_transfer = list_entry(drv_data->cur_msg->transfers.next,
@@ -1213,34 +1174,6 @@ static void pump_messages(struct work_struct *work)
/* Mark as busy and launch transfers */
tasklet_schedule(&drv_data->pump_transfers);
-
- drv_data->busy = 1;
- spin_unlock_irqrestore(&drv_data->lock, flags);
-}
-
-static int transfer(struct spi_device *spi, struct spi_message *msg)
-{
- struct driver_data *drv_data = spi_master_get_devdata(spi->master);
- unsigned long flags;
-
- spin_lock_irqsave(&drv_data->lock, flags);
-
- if (drv_data->run == QUEUE_STOPPED) {
- spin_unlock_irqrestore(&drv_data->lock, flags);
- return -ESHUTDOWN;
- }
-
- msg->actual_length = 0;
- msg->status = -EINPROGRESS;
- msg->state = START_STATE;
-
- list_add_tail(&msg->queue, &drv_data->queue);
-
- if (drv_data->run == QUEUE_RUNNING && !drv_data->busy)
- queue_work(drv_data->workqueue, &drv_data->pump_messages);
-
- spin_unlock_irqrestore(&drv_data->lock, flags);
-
return 0;
}
@@ -1287,7 +1220,6 @@ static int setup(struct spi_device *spi)
struct pxa2xx_spi_chip *chip_info = NULL;
struct chip_data *chip;
struct driver_data *drv_data = spi_master_get_devdata(spi->master);
- struct ssp_device *ssp = drv_data->ssp;
unsigned int clk_div;
uint tx_thres = TX_THRESH_DFLT;
uint rx_thres = RX_THRESH_DFLT;
@@ -1369,7 +1301,7 @@ static int setup(struct spi_device *spi)
}
}
- clk_div = ssp_get_clk_div(ssp, spi->max_speed_hz);
+ clk_div = ssp_get_clk_div(drv_data, spi->max_speed_hz);
chip->speed_hz = spi->max_speed_hz;
chip->cr0 = clk_div
@@ -1385,12 +1317,12 @@ static int setup(struct spi_device *spi)
/* NOTE: PXA25x_SSP _could_ use external clocking ... */
if (!pxa25x_ssp_comp(drv_data))
dev_dbg(&spi->dev, "%ld Hz actual, %s\n",
- clk_get_rate(ssp->clk)
+ drv_data->max_clk_rate
/ (1 + ((chip->cr0 & SSCR0_SCR(0xfff)) >> 8)),
chip->enable_dma ? "DMA" : "PIO");
else
dev_dbg(&spi->dev, "%ld Hz actual, %s\n",
- clk_get_rate(ssp->clk) / 2
+ drv_data->max_clk_rate / 2
/ (1 + ((chip->cr0 & SSCR0_SCR(0x0ff)) >> 8)),
chip->enable_dma ? "DMA" : "PIO");
@@ -1438,94 +1370,6 @@ static void cleanup(struct spi_device *spi)
kfree(chip);
}
-static int init_queue(struct driver_data *drv_data)
-{
- INIT_LIST_HEAD(&drv_data->queue);
- spin_lock_init(&drv_data->lock);
-
- drv_data->run = QUEUE_STOPPED;
- drv_data->busy = 0;
-
- tasklet_init(&drv_data->pump_transfers,
- pump_transfers, (unsigned long)drv_data);
-
- INIT_WORK(&drv_data->pump_messages, pump_messages);
- drv_data->workqueue = create_singlethread_workqueue(
- dev_name(drv_data->master->dev.parent));
- if (drv_data->workqueue == NULL)
- return -EBUSY;
-
- return 0;
-}
-
-static int start_queue(struct driver_data *drv_data)
-{
- unsigned long flags;
-
- spin_lock_irqsave(&drv_data->lock, flags);
-
- if (drv_data->run == QUEUE_RUNNING || drv_data->busy) {
- spin_unlock_irqrestore(&drv_data->lock, flags);
- return -EBUSY;
- }
-
- drv_data->run = QUEUE_RUNNING;
- drv_data->cur_msg = NULL;
- drv_data->cur_transfer = NULL;
- drv_data->cur_chip = NULL;
- spin_unlock_irqrestore(&drv_data->lock, flags);
-
- queue_work(drv_data->workqueue, &drv_data->pump_messages);
-
- return 0;
-}
-
-static int stop_queue(struct driver_data *drv_data)
-{
- unsigned long flags;
- unsigned limit = 500;
- int status = 0;
-
- spin_lock_irqsave(&drv_data->lock, flags);
-
- /* This is a bit lame, but is optimized for the common execution path.
- * A wait_queue on the drv_data->busy could be used, but then the common
- * execution path (pump_messages) would be required to call wake_up or
- * friends on every SPI message. Do this instead */
- drv_data->run = QUEUE_STOPPED;
- while ((!list_empty(&drv_data->queue) || drv_data->busy) && limit--) {
- spin_unlock_irqrestore(&drv_data->lock, flags);
- msleep(10);
- spin_lock_irqsave(&drv_data->lock, flags);
- }
-
- if (!list_empty(&drv_data->queue) || drv_data->busy)
- status = -EBUSY;
-
- spin_unlock_irqrestore(&drv_data->lock, flags);
-
- return status;
-}
-
-static int destroy_queue(struct driver_data *drv_data)
-{
- int status;
-
- status = stop_queue(drv_data);
- /* we are unloading the module or failing to load (only two calls
- * to this routine), and neither call can handle a return value.
- * However, destroy_workqueue calls flush_workqueue, and that will
- * block until all work is done. If the reason that stop_queue
- * timed out is that the work will never finish, then it does no
- * good to call destroy_workqueue, so return anyway. */
- if (status != 0)
- return status;
-
- destroy_workqueue(drv_data->workqueue);
-
- return 0;
-}
-
static int pxa2xx_spi_probe(struct platform_device *pdev)
{
struct device *dev = &pdev->dev;
@@ -1535,11 +1379,18 @@ static int pxa2xx_spi_probe(struct platform_device *pdev)
struct ssp_device *ssp;
int status;
- platform_info = dev->platform_data;
+ platform_info = dev_get_platdata(dev);
+ if (!platform_info) {
+ dev_err(&pdev->dev, "missing platform data\n");
+ return -ENODEV;
+ }
ssp = pxa_ssp_request(pdev->id, pdev->name);
- if (ssp == NULL) {
- dev_err(&pdev->dev, "failed to request SSP%d\n", pdev->id);
+ if (!ssp)
+ ssp = &platform_info->ssp;
+
+ if (!ssp->mmio_base) {
+ dev_err(&pdev->dev, "failed to get ssp\n");
return -ENODEV;
}
@@ -1561,16 +1412,15 @@ static int pxa2xx_spi_probe(struct platform_device *pdev)
/* the spi->mode bits understood by this driver: */
master->mode_bits = SPI_CPOL | SPI_CPHA | SPI_CS_HIGH;
- master->bus_num = pdev->id;
+ master->bus_num = ssp->port_id;
master->num_chipselect = platform_info->num_chipselect;
master->dma_alignment = DMA_ALIGNMENT;
master->cleanup = cleanup;
master->setup = setup;
- master->transfer = transfer;
+ master->transfer_one_message = pxa2xx_spi_transfer_one_message;
drv_data->ssp_type = ssp->type;
- drv_data->null_dma_buf = (u32 *)ALIGN((u32)(drv_data +
- sizeof(struct driver_data)), 8);
+ drv_data->null_dma_buf = (u32 *)PTR_ALIGN(&drv_data[1], DMA_ALIGNMENT);
drv_data->ioaddr = ssp->mmio_base;
drv_data->ssdr_physical = ssp->phys_base + SSDR;
@@ -1625,7 +1475,9 @@ static int pxa2xx_spi_probe(struct platform_device *pdev)
}
/* Enable SOC clock */
- clk_enable(ssp->clk);
+ clk_prepare_enable(ssp->clk);
+
+ drv_data->max_clk_rate = clk_get_rate(ssp->clk);
/* Load default SSP configuration */
write_SSCR0(0, drv_data->ioaddr);
@@ -1640,33 +1492,21 @@ static int pxa2xx_spi_probe(struct platform_device *pdev)
write_SSTO(0, drv_data->ioaddr);
write_SSPSP(0, drv_data->ioaddr);
- /* Initial and start queue */
- status = init_queue(drv_data);
- if (status != 0) {
- dev_err(&pdev->dev, "problem initializing queue\n");
- goto out_error_clock_enabled;
- }
- status = start_queue(drv_data);
- if (status != 0) {
- dev_err(&pdev->dev, "problem starting queue\n");
- goto out_error_clock_enabled;
- }
+ tasklet_init(&drv_data->pump_transfers, pump_transfers,
+ (unsigned long)drv_data);
/* Register with the SPI framework */
platform_set_drvdata(pdev, drv_data);
status = spi_register_master(master);
if (status != 0) {
dev_err(&pdev->dev, "problem registering spi master\n");
- goto out_error_queue_alloc;
+ goto out_error_clock_enabled;
}
return status;
-out_error_queue_alloc:
- destroy_queue(drv_data);
-
out_error_clock_enabled:
- clk_disable(ssp->clk);
+ clk_disable_unprepare(ssp->clk);
out_error_dma_alloc:
if (drv_data->tx_channel != -1)
@@ -1687,29 +1527,14 @@ static int pxa2xx_spi_remove(struct platform_device *pdev)
{
struct driver_data *drv_data = platform_get_drvdata(pdev);
struct ssp_device *ssp;
- int status = 0;
if (!drv_data)
return 0;
ssp = drv_data->ssp;
- /* Remove the queue */
- status = destroy_queue(drv_data);
- if (status != 0)
- /* the kernel does not check the return status of this
- * this routine (mod->exit, within the kernel). Therefore
- * nothing is gained by returning from here, the module is
- * going away regardless, and we should not leave any more
- * resources allocated than necessary. We cannot free the
- * message memory in drv_data->queue, but we can release the
- * resources below. I think the kernel should honor -EBUSY
- * returns but... */
- dev_err(&pdev->dev, "pxa2xx_spi_remove: workqueue will not "
- "complete, message memory not freed\n");
-
/* Disable the SSP at the peripheral and SOC level */
write_SSCR0(0, drv_data->ioaddr);
- clk_disable(ssp->clk);
+ clk_disable_unprepare(ssp->clk);
/* Release DMA */
if (drv_data->master_info->enable_dma) {
@@ -1749,11 +1574,11 @@ static int pxa2xx_spi_suspend(struct device *dev)
struct ssp_device *ssp = drv_data->ssp;
int status = 0;
- status = stop_queue(drv_data);
+ status = spi_master_suspend(drv_data->master);
if (status != 0)
return status;
write_SSCR0(0, drv_data->ioaddr);
- clk_disable(ssp->clk);
+ clk_disable_unprepare(ssp->clk);
return 0;
}
@@ -1772,10 +1597,10 @@ static int pxa2xx_spi_resume(struct device *dev)
DRCMR_MAPVLD | drv_data->tx_channel;
/* Enable the SSP clock */
- clk_enable(ssp->clk);
+ clk_prepare_enable(ssp->clk);
/* Start the queue running */
- status = start_queue(drv_data);
+ status = spi_master_resume(drv_data->master);
if (status != 0) {
dev_err(dev, "problem starting queue (%d)\n", status);
return status;
diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c
index d77b656..a82bfa4 100644
--- a/drivers/spi/spi-s3c64xx.c
+++ b/drivers/spi/spi-s3c64xx.c
@@ -957,6 +957,8 @@ static int s3c64xx_spi_setup(struct spi_device *spi)
if (spi->max_speed_hz >= speed) {
spi->max_speed_hz = speed;
} else {
+ dev_err(&spi->dev, "Can't set %dHz transfer speed\n",
+ spi->max_speed_hz);
err = -EINVAL;
goto setup_exit;
}
diff --git a/include/linux/platform_data/spi-omap2-mcspi.h b/include/linux/platform_data/spi-omap2-mcspi.h
index a65572d..c100456 100644
--- a/include/linux/platform_data/spi-omap2-mcspi.h
+++ b/include/linux/platform_data/spi-omap2-mcspi.h
@@ -22,6 +22,9 @@ struct omap2_mcspi_dev_attr {
struct omap2_mcspi_device_config {
unsigned turbo_mode:1;
+
+ /* toggle chip select after every word */
+ unsigned cs_per_word:1;
};
#endif
diff --git a/include/linux/pxa2xx_ssp.h b/include/linux/pxa2xx_ssp.h
index f366320..065e7f6 100644
--- a/include/linux/pxa2xx_ssp.h
+++ b/include/linux/pxa2xx_ssp.h
@@ -206,6 +206,15 @@ static inline u32 pxa_ssp_read_reg(struct ssp_device *dev, u32 reg)
return __raw_readl(dev->mmio_base + reg);
}
+#ifdef CONFIG_ARCH_PXA
struct ssp_device *pxa_ssp_request(int port, const char *label);
void pxa_ssp_free(struct ssp_device *);
+#else
+static inline struct ssp_device *pxa_ssp_request(int port, const char *label)
+{
+ return NULL;
+}
+static inline void pxa_ssp_free(struct ssp_device *ssp) {}
+#endif
+
#endif
diff --git a/include/linux/spi/pxa2xx_spi.h b/include/linux/spi/pxa2xx_spi.h
index c73d144..053b5ba 100644
--- a/include/linux/spi/pxa2xx_spi.h
+++ b/include/linux/spi/pxa2xx_spi.h
@@ -28,6 +28,9 @@ struct pxa2xx_spi_master {
u32 clock_enable;
u16 num_chipselect;
u8 enable_dma;
+
+ /* For non-PXA arches */
+ struct ssp_device ssp;
};
/* spi_board_info.controller_data for SPI slave devices,
@@ -130,23 +133,5 @@ static inline void pxa_free_dma(int dma_ch)
{
}
-/*
- * The CE4100 does not have the clk framework implemented and SPI clock can
- * not be switched on/off or the divider changed.
- */
-static inline void clk_disable(struct clk *clk)
-{
-}
-
-static inline int clk_enable(struct clk *clk)
-{
- return 0;
-}
-
-static inline unsigned long clk_get_rate(struct clk *clk)
-{
- return 3686400;
-}
-
#endif
#endif
diff --git a/include/linux/spi/spi_gpio.h b/include/linux/spi/spi_gpio.h
index 369b3d7..1634ce3 100644
--- a/include/linux/spi/spi_gpio.h
+++ b/include/linux/spi/spi_gpio.h
@@ -62,8 +62,8 @@
*/
struct spi_gpio_platform_data {
unsigned sck;
- unsigned mosi;
- unsigned miso;
+ unsigned long mosi;
+ unsigned long miso;
u16 num_chipselect;
};