diff options
-rw-r--r-- | Documentation/devicetree/bindings/regulator/mt6397-regulator.txt | 217 | ||||
-rw-r--r-- | Documentation/devicetree/bindings/regulator/pfuze100.txt | 94 | ||||
-rw-r--r-- | drivers/regulator/Kconfig | 9 | ||||
-rw-r--r-- | drivers/regulator/Makefile | 1 | ||||
-rw-r--r-- | drivers/regulator/core.c | 112 | ||||
-rw-r--r-- | drivers/regulator/max8649.c | 4 | ||||
-rw-r--r-- | drivers/regulator/mt6397-regulator.c | 332 | ||||
-rw-r--r-- | drivers/regulator/pfuze100-regulator.c | 134 | ||||
-rw-r--r-- | drivers/regulator/qcom_rpm-regulator.c | 1 | ||||
-rw-r--r-- | include/linux/regulator/mt6397-regulator.h | 49 | ||||
-rw-r--r-- | include/linux/regulator/pfuze100.h | 14 |
11 files changed, 878 insertions, 89 deletions
diff --git a/Documentation/devicetree/bindings/regulator/mt6397-regulator.txt b/Documentation/devicetree/bindings/regulator/mt6397-regulator.txt new file mode 100644 index 0000000..a42b1d6 --- /dev/null +++ b/Documentation/devicetree/bindings/regulator/mt6397-regulator.txt @@ -0,0 +1,217 @@ +Mediatek MT6397 Regulator Driver + +Required properties: +- compatible: "mediatek,mt6397-regulator" +- mt6397regulator: List of regulators provided by this controller. It is named + according to its regulator type, buck_<name> and ldo_<name>. + The definition for each of these nodes is defined using the standard binding + for regulators at Documentation/devicetree/bindings/regulator/regulator.txt. + +The valid names for regulators are:: +BUCK: + buck_vpca15, buck_vpca7, buck_vsramca15, buck_vsramca7, buck_vcore, buck_vgpu, + buck_vdrm, buck_vio18 +LDO: + ldo_vtcxo, ldo_va28, ldo_vcama, ldo_vio28, ldo_vusb, ldo_vmc, ldo_vmch, + ldo_vemc3v3, ldo_vgp1, ldo_vgp2, ldo_vgp3, ldo_vgp4, ldo_vgp5, ldo_vgp6, + ldo_vibr + +Example: + pmic { + compatible = "mediatek,mt6397"; + + mt6397regulator: mt6397regulator { + compatible = "mediatek,mt6397-regulator"; + + mt6397_vpca15_reg: buck_vpca15 { + regulator-compatible = "buck_vpca15"; + regulator-name = "vpca15"; + regulator-min-microvolt = < 850000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <200>; + }; + + mt6397_vpca7_reg: buck_vpca7 { + regulator-compatible = "buck_vpca7"; + regulator-name = "vpca7"; + regulator-min-microvolt = < 850000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <115>; + }; + + mt6397_vsramca15_reg: buck_vsramca15 { + regulator-compatible = "buck_vsramca15"; + regulator-name = "vsramca15"; + regulator-min-microvolt = < 850000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <115>; + + }; + + mt6397_vsramca7_reg: buck_vsramca7 { + regulator-compatible = "buck_vsramca7"; + regulator-name = "vsramca7"; + regulator-min-microvolt = < 850000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <115>; + + }; + + mt6397_vcore_reg: buck_vcore { + regulator-compatible = "buck_vcore"; + regulator-name = "vcore"; + regulator-min-microvolt = < 850000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <115>; + }; + + mt6397_vgpu_reg: buck_vgpu { + regulator-compatible = "buck_vgpu"; + regulator-name = "vgpu"; + regulator-min-microvolt = < 700000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <115>; + }; + + mt6397_vdrm_reg: buck_vdrm { + regulator-compatible = "buck_vdrm"; + regulator-name = "vdrm"; + regulator-min-microvolt = < 800000>; + regulator-max-microvolt = <1400000>; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <500>; + }; + + mt6397_vio18_reg: buck_vio18 { + regulator-compatible = "buck_vio18"; + regulator-name = "vio18"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <2120000>; + regulator-ramp-delay = <12500>; + regulator-enable-ramp-delay = <500>; + }; + + mt6397_vtcxo_reg: ldo_vtcxo { + regulator-compatible = "ldo_vtcxo"; + regulator-name = "vtcxo"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <90>; + }; + + mt6397_va28_reg: ldo_va28 { + regulator-compatible = "ldo_va28"; + regulator-name = "va28"; + /* fixed output 2.8 V */ + regulator-enable-ramp-delay = <218>; + }; + + mt6397_vcama_reg: ldo_vcama { + regulator-compatible = "ldo_vcama"; + regulator-name = "vcama"; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <2800000>; + regulator-enable-ramp-delay = <218>; + }; + + mt6397_vio28_reg: ldo_vio28 { + regulator-compatible = "ldo_vio28"; + regulator-name = "vio28"; + /* fixed output 2.8 V */ + regulator-enable-ramp-delay = <240>; + }; + + mt6397_usb_reg: ldo_vusb { + regulator-compatible = "ldo_vusb"; + regulator-name = "vusb"; + /* fixed output 3.3 V */ + regulator-enable-ramp-delay = <218>; + }; + + mt6397_vmc_reg: ldo_vmc { + regulator-compatible = "ldo_vmc"; + regulator-name = "vmc"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <218>; + }; + + mt6397_vmch_reg: ldo_vmch { + regulator-compatible = "ldo_vmch"; + regulator-name = "vmch"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <218>; + }; + + mt6397_vemc_3v3_reg: ldo_vemc3v3 { + regulator-compatible = "ldo_vemc3v3"; + regulator-name = "vemc_3v3"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <218>; + }; + + mt6397_vgp1_reg: ldo_vgp1 { + regulator-compatible = "ldo_vgp1"; + regulator-name = "vcamd"; + regulator-min-microvolt = <1220000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <240>; + }; + + mt6397_vgp2_reg: ldo_vgp2 { + egulator-compatible = "ldo_vgp2"; + regulator-name = "vcamio"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <218>; + }; + + mt6397_vgp3_reg: ldo_vgp3 { + regulator-compatible = "ldo_vgp3"; + regulator-name = "vcamaf"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <218>; + }; + + mt6397_vgp4_reg: ldo_vgp4 { + regulator-compatible = "ldo_vgp4"; + regulator-name = "vgp4"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <218>; + }; + + mt6397_vgp5_reg: ldo_vgp5 { + regulator-compatible = "ldo_vgp5"; + regulator-name = "vgp5"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3000000>; + regulator-enable-ramp-delay = <218>; + }; + + mt6397_vgp6_reg: ldo_vgp6 { + regulator-compatible = "ldo_vgp6"; + regulator-name = "vgp6"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <218>; + }; + + mt6397_vibr_reg: ldo_vibr { + regulator-compatible = "ldo_vibr"; + regulator-name = "vibr"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <3300000>; + regulator-enable-ramp-delay = <218>; + }; + }; + }; diff --git a/Documentation/devicetree/bindings/regulator/pfuze100.txt b/Documentation/devicetree/bindings/regulator/pfuze100.txt index 34ef5d1..9b40db8 100644 --- a/Documentation/devicetree/bindings/regulator/pfuze100.txt +++ b/Documentation/devicetree/bindings/regulator/pfuze100.txt @@ -1,7 +1,7 @@ PFUZE100 family of regulators Required properties: -- compatible: "fsl,pfuze100" or "fsl,pfuze200" +- compatible: "fsl,pfuze100", "fsl,pfuze200", "fsl,pfuze3000" - reg: I2C slave address Required child node: @@ -14,6 +14,8 @@ Required child node: sw1ab,sw1c,sw2,sw3a,sw3b,sw4,swbst,vsnvs,vrefddr,vgen1~vgen6 --PFUZE200 sw1ab,sw2,sw3a,sw3b,swbst,vsnvs,vrefddr,vgen1~vgen6 + --PFUZE3000 + sw1a,sw1b,sw2,sw3,swbst,vsnvs,vrefddr,vldo1,vldo2,vccsd,v33,vldo3,vldo4 Each regulator is defined using the standard binding for regulators. @@ -205,3 +207,93 @@ Example 2: PFUZE200 }; }; }; + +Example 3: PFUZE3000 + + pmic: pfuze3000@08 { + compatible = "fsl,pfuze3000"; + reg = <0x08>; + + regulators { + sw1a_reg: sw1a { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1475000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + /* use sw1c_reg to align with pfuze100/pfuze200 */ + sw1c_reg: sw1b { + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1475000>; + regulator-boot-on; + regulator-always-on; + regulator-ramp-delay = <6250>; + }; + + sw2_reg: sw2 { + regulator-min-microvolt = <2500000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + sw3a_reg: sw3 { + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <1650000>; + regulator-boot-on; + regulator-always-on; + }; + + swbst_reg: swbst { + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5150000>; + }; + + snvs_reg: vsnvs { + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <3000000>; + regulator-boot-on; + regulator-always-on; + }; + + vref_reg: vrefddr { + regulator-boot-on; + regulator-always-on; + }; + + vgen1_reg: vldo1 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen2_reg: vldo2 { + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1550000>; + }; + + vgen3_reg: vccsd { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen4_reg: v33 { + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <3300000>; + }; + + vgen5_reg: vldo3 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + vgen6_reg: vldo4 { + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + }; + }; diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig index c1f9c33..a6f116a 100644 --- a/drivers/regulator/Kconfig +++ b/drivers/regulator/Kconfig @@ -441,6 +441,15 @@ config REGULATOR_MC13892 Say y here to support the regulators found on the Freescale MC13892 PMIC. +config REGULATOR_MT6397 + tristate "MediaTek MT6397 PMIC" + depends on MFD_MT6397 + help + Say y here to select this option to enable the power regulator of + MediaTek MT6397 PMIC. + This driver supports the control of different power rails of device + through regulator interface. + config REGULATOR_PALMAS tristate "TI Palmas PMIC Regulators" depends on MFD_PALMAS diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 12408d6..2c4da15 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -59,6 +59,7 @@ obj-$(CONFIG_REGULATOR_MAX77843) += max77843.o obj-$(CONFIG_REGULATOR_MC13783) += mc13783-regulator.o obj-$(CONFIG_REGULATOR_MC13892) += mc13892-regulator.o obj-$(CONFIG_REGULATOR_MC13XXX_CORE) += mc13xxx-regulator-core.o +obj-$(CONFIG_REGULATOR_MT6397) += mt6397-regulator.o obj-$(CONFIG_REGULATOR_QCOM_RPM) += qcom_rpm-regulator.o obj-$(CONFIG_REGULATOR_PALMAS) += palmas-regulator.o obj-$(CONFIG_REGULATOR_PFUZE100) += pfuze100-regulator.o diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index e607baf..b899947 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -634,23 +634,32 @@ static DEVICE_ATTR(bypass, 0444, /* Calculate the new optimum regulator operating mode based on the new total * consumer load. All locks held by caller */ -static void drms_uA_update(struct regulator_dev *rdev) +static int drms_uA_update(struct regulator_dev *rdev) { struct regulator *sibling; int current_uA = 0, output_uV, input_uV, err; unsigned int mode; + /* + * first check to see if we can set modes at all, otherwise just + * tell the consumer everything is OK. + */ err = regulator_check_drms(rdev); - if (err < 0 || !rdev->desc->ops->get_optimum_mode || - (!rdev->desc->ops->get_voltage && - !rdev->desc->ops->get_voltage_sel) || - !rdev->desc->ops->set_mode) - return; + if (err < 0) + return 0; + + if (!rdev->desc->ops->get_optimum_mode) + return 0; + + if (!rdev->desc->ops->set_mode) + return -EINVAL; /* get output voltage */ output_uV = _regulator_get_voltage(rdev); - if (output_uV <= 0) - return; + if (output_uV <= 0) { + rdev_err(rdev, "invalid output voltage found\n"); + return -EINVAL; + } /* get input voltage */ input_uV = 0; @@ -658,8 +667,10 @@ static void drms_uA_update(struct regulator_dev *rdev) input_uV = regulator_get_voltage(rdev->supply); if (input_uV <= 0) input_uV = rdev->constraints->input_uV; - if (input_uV <= 0) - return; + if (input_uV <= 0) { + rdev_err(rdev, "invalid input voltage found\n"); + return -EINVAL; + } /* calc total requested load */ list_for_each_entry(sibling, &rdev->consumer_list, list) @@ -671,8 +682,17 @@ static void drms_uA_update(struct regulator_dev *rdev) /* check the new mode is allowed */ err = regulator_mode_constrain(rdev, &mode); - if (err == 0) - rdev->desc->ops->set_mode(rdev, mode); + if (err < 0) { + rdev_err(rdev, "failed to get optimum mode @ %d uA %d -> %d uV\n", + current_uA, input_uV, output_uV); + return err; + } + + err = rdev->desc->ops->set_mode(rdev, mode); + if (err < 0) + rdev_err(rdev, "failed to set optimum mode %x\n", mode); + + return err; } static int suspend_set_state(struct regulator_dev *rdev, @@ -3002,75 +3022,13 @@ EXPORT_SYMBOL_GPL(regulator_get_mode); int regulator_set_optimum_mode(struct regulator *regulator, int uA_load) { struct regulator_dev *rdev = regulator->rdev; - struct regulator *consumer; - int ret, output_uV, input_uV = 0, total_uA_load = 0; - unsigned int mode; - - if (rdev->supply) - input_uV = regulator_get_voltage(rdev->supply); + int ret; mutex_lock(&rdev->mutex); - - /* - * first check to see if we can set modes at all, otherwise just - * tell the consumer everything is OK. - */ regulator->uA_load = uA_load; - ret = regulator_check_drms(rdev); - if (ret < 0) { - ret = 0; - goto out; - } - - if (!rdev->desc->ops->get_optimum_mode) - goto out; - - /* - * we can actually do this so any errors are indicators of - * potential real failure. - */ - ret = -EINVAL; - - if (!rdev->desc->ops->set_mode) - goto out; - - /* get output voltage */ - output_uV = _regulator_get_voltage(rdev); - if (output_uV <= 0) { - rdev_err(rdev, "invalid output voltage found\n"); - goto out; - } - - /* No supply? Use constraint voltage */ - if (input_uV <= 0) - input_uV = rdev->constraints->input_uV; - if (input_uV <= 0) { - rdev_err(rdev, "invalid input voltage found\n"); - goto out; - } - - /* calc total requested load for this regulator */ - list_for_each_entry(consumer, &rdev->consumer_list, list) - total_uA_load += consumer->uA_load; - - mode = rdev->desc->ops->get_optimum_mode(rdev, - input_uV, output_uV, - total_uA_load); - ret = regulator_mode_constrain(rdev, &mode); - if (ret < 0) { - rdev_err(rdev, "failed to get optimum mode @ %d uA %d -> %d uV\n", - total_uA_load, input_uV, output_uV); - goto out; - } - - ret = rdev->desc->ops->set_mode(rdev, mode); - if (ret < 0) { - rdev_err(rdev, "failed to set optimum mode %x\n", mode); - goto out; - } - ret = mode; -out: + ret = drms_uA_update(rdev); mutex_unlock(&rdev->mutex); + return ret; } EXPORT_SYMBOL_GPL(regulator_set_optimum_mode); diff --git a/drivers/regulator/max8649.c b/drivers/regulator/max8649.c index c8bddcc..8122957 100644 --- a/drivers/regulator/max8649.c +++ b/drivers/regulator/max8649.c @@ -115,7 +115,7 @@ static unsigned int max8649_get_mode(struct regulator_dev *rdev) return REGULATOR_MODE_NORMAL; } -static struct regulator_ops max8649_dcdc_ops = { +static const struct regulator_ops max8649_dcdc_ops = { .set_voltage_sel = regulator_set_voltage_sel_regmap, .get_voltage_sel = regulator_get_voltage_sel_regmap, .list_voltage = regulator_list_voltage_linear, @@ -143,7 +143,7 @@ static struct regulator_desc dcdc_desc = { .enable_is_inverted = true, }; -static struct regmap_config max8649_regmap_config = { +static const struct regmap_config max8649_regmap_config = { .reg_bits = 8, .val_bits = 8, }; diff --git a/drivers/regulator/mt6397-regulator.c b/drivers/regulator/mt6397-regulator.c new file mode 100644 index 0000000..a5b2f47 --- /dev/null +++ b/drivers/regulator/mt6397-regulator.c @@ -0,0 +1,332 @@ +/* + * Copyright (c) 2014 MediaTek Inc. + * Author: Flora Fu <flora.fu@mediatek.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/module.h> +#include <linux/of.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/mfd/mt6397/core.h> +#include <linux/mfd/mt6397/registers.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/machine.h> +#include <linux/regulator/mt6397-regulator.h> +#include <linux/regulator/of_regulator.h> + +/* + * MT6397 regulators' information + * + * @desc: standard fields of regulator description. + * @qi: Mask for query enable signal status of regulators + * @vselon_reg: Register sections for hardware control mode of bucks + * @vselctrl_reg: Register for controlling the buck control mode. + * @vselctrl_mask: Mask for query buck's voltage control mode. + */ +struct mt6397_regulator_info { + struct regulator_desc desc; + u32 qi; + u32 vselon_reg; + u32 vselctrl_reg; + u32 vselctrl_mask; +}; + +#define MT6397_BUCK(match, vreg, min, max, step, volt_ranges, enreg, \ + vosel, vosel_mask, voselon, vosel_ctrl) \ +[MT6397_ID_##vreg] = { \ + .desc = { \ + .name = #vreg, \ + .of_match = of_match_ptr(match), \ + .ops = &mt6397_volt_range_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = MT6397_ID_##vreg, \ + .owner = THIS_MODULE, \ + .n_voltages = (max - min)/step + 1, \ + .linear_ranges = volt_ranges, \ + .n_linear_ranges = ARRAY_SIZE(volt_ranges), \ + .vsel_reg = vosel, \ + .vsel_mask = vosel_mask, \ + .enable_reg = enreg, \ + .enable_mask = BIT(0), \ + }, \ + .qi = BIT(13), \ + .vselon_reg = voselon, \ + .vselctrl_reg = vosel_ctrl, \ + .vselctrl_mask = BIT(1), \ +} + +#define MT6397_LDO(match, vreg, ldo_volt_table, enreg, enbit, vosel, \ + vosel_mask) \ +[MT6397_ID_##vreg] = { \ + .desc = { \ + .name = #vreg, \ + .of_match = of_match_ptr(match), \ + .ops = &mt6397_volt_table_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = MT6397_ID_##vreg, \ + .owner = THIS_MODULE, \ + .n_voltages = ARRAY_SIZE(ldo_volt_table), \ + .volt_table = ldo_volt_table, \ + .vsel_reg = vosel, \ + .vsel_mask = vosel_mask, \ + .enable_reg = enreg, \ + .enable_mask = BIT(enbit), \ + }, \ + .qi = BIT(15), \ +} + +#define MT6397_REG_FIXED(match, vreg, enreg, enbit, volt) \ +[MT6397_ID_##vreg] = { \ + .desc = { \ + .name = #vreg, \ + .of_match = of_match_ptr(match), \ + .ops = &mt6397_volt_fixed_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = MT6397_ID_##vreg, \ + .owner = THIS_MODULE, \ + .n_voltages = 1, \ + .enable_reg = enreg, \ + .enable_mask = BIT(enbit), \ + .min_uV = volt, \ + }, \ + .qi = BIT(15), \ +} + +static const struct regulator_linear_range buck_volt_range1[] = { + REGULATOR_LINEAR_RANGE(700000, 0, 0x7f, 6250), +}; + +static const struct regulator_linear_range buck_volt_range2[] = { + REGULATOR_LINEAR_RANGE(800000, 0, 0x7f, 6250), +}; + +static const struct regulator_linear_range buck_volt_range3[] = { + REGULATOR_LINEAR_RANGE(1500000, 0, 0x1f, 20000), +}; + +static const u32 ldo_volt_table1[] = { + 1500000, 1800000, 2500000, 2800000, +}; + +static const u32 ldo_volt_table2[] = { + 1800000, 3300000, +}; + +static const u32 ldo_volt_table3[] = { + 3000000, 3300000, +}; + +static const u32 ldo_volt_table4[] = { + 1220000, 1300000, 1500000, 1800000, 2500000, 2800000, 3000000, 3300000, +}; + +static const u32 ldo_volt_table5[] = { + 1200000, 1300000, 1500000, 1800000, 2500000, 2800000, 3000000, 3300000, +}; + +static const u32 ldo_volt_table5_v2[] = { + 1200000, 1000000, 1500000, 1800000, 2500000, 2800000, 3000000, 3300000, +}; + +static const u32 ldo_volt_table6[] = { + 1200000, 1300000, 1500000, 1800000, 2500000, 2800000, 3000000, 2000000, +}; + +static const u32 ldo_volt_table7[] = { + 1300000, 1500000, 1800000, 2000000, 2500000, 2800000, 3000000, 3300000, +}; + +static int mt6397_get_status(struct regulator_dev *rdev) +{ + int ret; + u32 regval; + struct mt6397_regulator_info *info = rdev_get_drvdata(rdev); + + ret = regmap_read(rdev->regmap, info->desc.enable_reg, ®val); + if (ret != 0) { + dev_err(&rdev->dev, "Failed to get enable reg: %d\n", ret); + return ret; + } + + return (regval & info->qi) ? REGULATOR_STATUS_ON : REGULATOR_STATUS_OFF; +} + +static struct regulator_ops mt6397_volt_range_ops = { + .list_voltage = regulator_list_voltage_linear_range, + .map_voltage = regulator_map_voltage_linear_range, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_time_sel = regulator_set_voltage_time_sel, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .get_status = mt6397_get_status, +}; + +static struct regulator_ops mt6397_volt_table_ops = { + .list_voltage = regulator_list_voltage_table, + .map_voltage = regulator_map_voltage_iterate, + .set_voltage_sel = regulator_set_voltage_sel_regmap, + .get_voltage_sel = regulator_get_voltage_sel_regmap, + .set_voltage_time_sel = regulator_set_voltage_time_sel, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .get_status = mt6397_get_status, +}; + +static struct regulator_ops mt6397_volt_fixed_ops = { + .list_voltage = regulator_list_voltage_linear, + .enable = regulator_enable_regmap, + .disable = regulator_disable_regmap, + .is_enabled = regulator_is_enabled_regmap, + .get_status = mt6397_get_status, +}; + +/* The array is indexed by id(MT6397_ID_XXX) */ +static struct mt6397_regulator_info mt6397_regulators[] = { + MT6397_BUCK("buck_vpca15", VPCA15, 700000, 1493750, 6250, + buck_volt_range1, MT6397_VCA15_CON7, MT6397_VCA15_CON9, 0x7f, + MT6397_VCA15_CON10, MT6397_VCA15_CON5), + MT6397_BUCK("buck_vpca7", VPCA7, 700000, 1493750, 6250, + buck_volt_range1, MT6397_VPCA7_CON7, MT6397_VPCA7_CON9, 0x7f, + MT6397_VPCA7_CON10, MT6397_VPCA7_CON5), + MT6397_BUCK("buck_vsramca15", VSRAMCA15, 700000, 1493750, 6250, + buck_volt_range1, MT6397_VSRMCA15_CON7, MT6397_VSRMCA15_CON9, + 0x7f, MT6397_VSRMCA15_CON10, MT6397_VSRMCA15_CON5), + MT6397_BUCK("buck_vsramca7", VSRAMCA7, 700000, 1493750, 6250, + buck_volt_range1, MT6397_VSRMCA7_CON7, MT6397_VSRMCA7_CON9, + 0x7f, MT6397_VSRMCA7_CON10, MT6397_VSRMCA7_CON5), + MT6397_BUCK("buck_vcore", VCORE, 700000, 1493750, 6250, + buck_volt_range1, MT6397_VCORE_CON7, MT6397_VCORE_CON9, 0x7f, + MT6397_VCORE_CON10, MT6397_VCORE_CON5), + MT6397_BUCK("buck_vgpu", VGPU, 700000, 1493750, 6250, buck_volt_range1, + MT6397_VGPU_CON7, MT6397_VGPU_CON9, 0x7f, + MT6397_VGPU_CON10, MT6397_VGPU_CON5), + MT6397_BUCK("buck_vdrm", VDRM, 800000, 1593750, 6250, buck_volt_range2, + MT6397_VDRM_CON7, MT6397_VDRM_CON9, 0x7f, + MT6397_VDRM_CON10, MT6397_VDRM_CON5), + MT6397_BUCK("buck_vio18", VIO18, 1500000, 2120000, 20000, + buck_volt_range3, MT6397_VIO18_CON7, MT6397_VIO18_CON9, 0x1f, + MT6397_VIO18_CON10, MT6397_VIO18_CON5), + MT6397_REG_FIXED("ldo_vtcxo", VTCXO, MT6397_ANALDO_CON0, 10, 2800000), + MT6397_REG_FIXED("ldo_va28", VA28, MT6397_ANALDO_CON1, 14, 2800000), + MT6397_LDO("ldo_vcama", VCAMA, ldo_volt_table1, + MT6397_ANALDO_CON2, 15, MT6397_ANALDO_CON6, 0xC0), + MT6397_REG_FIXED("ldo_vio28", VIO28, MT6397_DIGLDO_CON0, 14, 2800000), + MT6397_REG_FIXED("ldo_vusb", VUSB, MT6397_DIGLDO_CON1, 14, 3300000), + MT6397_LDO("ldo_vmc", VMC, ldo_volt_table2, + MT6397_DIGLDO_CON2, 12, MT6397_DIGLDO_CON29, 0x10), + MT6397_LDO("ldo_vmch", VMCH, ldo_volt_table3, + MT6397_DIGLDO_CON3, 14, MT6397_DIGLDO_CON17, 0x80), + MT6397_LDO("ldo_vemc3v3", VEMC3V3, ldo_volt_table3, + MT6397_DIGLDO_CON4, 14, MT6397_DIGLDO_CON18, 0x10), + MT6397_LDO("ldo_vgp1", VGP1, ldo_volt_table4, + MT6397_DIGLDO_CON5, 15, MT6397_DIGLDO_CON19, 0xE0), + MT6397_LDO("ldo_vgp2", VGP2, ldo_volt_table5, + MT6397_DIGLDO_CON6, 15, MT6397_DIGLDO_CON20, 0xE0), + MT6397_LDO("ldo_vgp3", VGP3, ldo_volt_table5, + MT6397_DIGLDO_CON7, 15, MT6397_DIGLDO_CON21, 0xE0), + MT6397_LDO("ldo_vgp4", VGP4, ldo_volt_table5, + MT6397_DIGLDO_CON8, 15, MT6397_DIGLDO_CON22, 0xE0), + MT6397_LDO("ldo_vgp5", VGP5, ldo_volt_table6, + MT6397_DIGLDO_CON9, 15, MT6397_DIGLDO_CON23, 0xE0), + MT6397_LDO("ldo_vgp6", VGP6, ldo_volt_table5, + MT6397_DIGLDO_CON10, 15, MT6397_DIGLDO_CON33, 0xE0), + MT6397_LDO("ldo_vibr", VIBR, ldo_volt_table7, + MT6397_DIGLDO_CON24, 15, MT6397_DIGLDO_CON25, 0xE00), +}; + +static int mt6397_set_buck_vosel_reg(struct platform_device *pdev) +{ + struct mt6397_chip *mt6397 = dev_get_drvdata(pdev->dev.parent); + int i; + u32 regval; + + for (i = 0; i < MT6397_MAX_REGULATOR; i++) { + if (mt6397_regulators[i].vselctrl_reg) { + if (regmap_read(mt6397->regmap, + mt6397_regulators[i].vselctrl_reg, + ®val) < 0) { + dev_err(&pdev->dev, + "Failed to read buck ctrl\n"); + return -EIO; + } + + if (regval & mt6397_regulators[i].vselctrl_mask) { + mt6397_regulators[i].desc.vsel_reg = + mt6397_regulators[i].vselon_reg; + } + } + } + + return 0; +} + +static int mt6397_regulator_probe(struct platform_device *pdev) +{ + struct mt6397_chip *mt6397 = dev_get_drvdata(pdev->dev.parent); + struct regulator_config config = {}; + struct regulator_dev *rdev; + int i; + u32 reg_value, version; + + /* Query buck controller to select activated voltage register part */ + if (mt6397_set_buck_vosel_reg(pdev)) + return -EIO; + + /* Read PMIC chip revision to update constraints and voltage table */ + if (regmap_read(mt6397->regmap, MT6397_CID, ®_value) < 0) { + dev_err(&pdev->dev, "Failed to read Chip ID\n"); + return -EIO; + } + dev_info(&pdev->dev, "Chip ID = 0x%x\n", reg_value); + + version = (reg_value & 0xFF); + switch (version) { + case MT6397_REGULATOR_ID91: + mt6397_regulators[MT6397_ID_VGP2].desc.volt_table = + ldo_volt_table5_v2; + break; + default: + break; + } + + for (i = 0; i < MT6397_MAX_REGULATOR; i++) { + config.dev = &pdev->dev; + config.driver_data = &mt6397_regulators[i]; + config.regmap = mt6397->regmap; + rdev = devm_regulator_register(&pdev->dev, + &mt6397_regulators[i].desc, &config); + if (IS_ERR(rdev)) { + dev_err(&pdev->dev, "failed to register %s\n", + mt6397_regulators[i].desc.name); + return PTR_ERR(rdev); + } + } + + return 0; +} + +static struct platform_driver mt6397_regulator_driver = { + .driver = { + .name = "mt6397-regulator", + }, + .probe = mt6397_regulator_probe, +}; + +module_platform_driver(mt6397_regulator_driver); + +MODULE_AUTHOR("Flora Fu <flora.fu@mediatek.com>"); +MODULE_DESCRIPTION("Regulator Driver for MediaTek MT6397 PMIC"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:mt6397-regulator"); diff --git a/drivers/regulator/pfuze100-regulator.c b/drivers/regulator/pfuze100-regulator.c index c879dff..8cc8d18 100644 --- a/drivers/regulator/pfuze100-regulator.c +++ b/drivers/regulator/pfuze100-regulator.c @@ -56,7 +56,7 @@ #define PFUZE100_VGEN5VOL 0x70 #define PFUZE100_VGEN6VOL 0x71 -enum chips { PFUZE100, PFUZE200 }; +enum chips { PFUZE100, PFUZE200, PFUZE3000 = 3 }; struct pfuze_regulator { struct regulator_desc desc; @@ -80,9 +80,18 @@ static const int pfuze100_vsnvs[] = { 1000000, 1100000, 1200000, 1300000, 1500000, 1800000, 3000000, }; +static const int pfuze3000_sw2lo[] = { + 1500000, 1550000, 1600000, 1650000, 1700000, 1750000, 1800000, 1850000, +}; + +static const int pfuze3000_sw2hi[] = { + 2500000, 2800000, 2850000, 3000000, 3100000, 3150000, 3200000, 3300000, +}; + static const struct i2c_device_id pfuze_device_id[] = { {.name = "pfuze100", .driver_data = PFUZE100}, {.name = "pfuze200", .driver_data = PFUZE200}, + {.name = "pfuze3000", .driver_data = PFUZE3000}, { } }; MODULE_DEVICE_TABLE(i2c, pfuze_device_id); @@ -90,6 +99,7 @@ MODULE_DEVICE_TABLE(i2c, pfuze_device_id); static const struct of_device_id pfuze_dt_ids[] = { { .compatible = "fsl,pfuze100", .data = (void *)PFUZE100}, { .compatible = "fsl,pfuze200", .data = (void *)PFUZE200}, + { .compatible = "fsl,pfuze3000", .data = (void *)PFUZE3000}, { } }; MODULE_DEVICE_TABLE(of, pfuze_dt_ids); @@ -219,6 +229,60 @@ static struct regulator_ops pfuze100_swb_regulator_ops = { .stby_mask = 0x20, \ } +#define PFUZE3000_VCC_REG(_chip, _name, base, min, max, step) { \ + .desc = { \ + .name = #_name, \ + .n_voltages = ((max) - (min)) / (step) + 1, \ + .ops = &pfuze100_ldo_regulator_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = _chip ## _ ## _name, \ + .owner = THIS_MODULE, \ + .min_uV = (min), \ + .uV_step = (step), \ + .vsel_reg = (base), \ + .vsel_mask = 0x3, \ + .enable_reg = (base), \ + .enable_mask = 0x10, \ + }, \ + .stby_reg = (base), \ + .stby_mask = 0x20, \ +} + + +#define PFUZE3000_SW2_REG(_chip, _name, base, min, max, step) { \ + .desc = { \ + .name = #_name,\ + .n_voltages = ((max) - (min)) / (step) + 1, \ + .ops = &pfuze100_sw_regulator_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = _chip ## _ ## _name, \ + .owner = THIS_MODULE, \ + .min_uV = (min), \ + .uV_step = (step), \ + .vsel_reg = (base) + PFUZE100_VOL_OFFSET, \ + .vsel_mask = 0x7, \ + }, \ + .stby_reg = (base) + PFUZE100_STANDBY_OFFSET, \ + .stby_mask = 0x7, \ +} + +#define PFUZE3000_SW3_REG(_chip, _name, base, min, max, step) { \ + .desc = { \ + .name = #_name,\ + .n_voltages = ((max) - (min)) / (step) + 1, \ + .ops = &pfuze100_sw_regulator_ops, \ + .type = REGULATOR_VOLTAGE, \ + .id = _chip ## _ ## _name, \ + .owner = THIS_MODULE, \ + .min_uV = (min), \ + .uV_step = (step), \ + .vsel_reg = (base) + PFUZE100_VOL_OFFSET, \ + .vsel_mask = 0xf, \ + }, \ + .stby_reg = (base) + PFUZE100_STANDBY_OFFSET, \ + .stby_mask = 0xf, \ +} + /* PFUZE100 */ static struct pfuze_regulator pfuze100_regulators[] = { PFUZE100_SW_REG(PFUZE100, SW1AB, PFUZE100_SW1ABVOL, 300000, 1875000, 25000), @@ -254,6 +318,22 @@ static struct pfuze_regulator pfuze200_regulators[] = { PFUZE100_VGEN_REG(PFUZE200, VGEN6, PFUZE100_VGEN6VOL, 1800000, 3300000, 100000), }; +static struct pfuze_regulator pfuze3000_regulators[] = { + PFUZE100_SW_REG(PFUZE3000, SW1A, PFUZE100_SW1ABVOL, 700000, 1475000, 25000), + PFUZE100_SW_REG(PFUZE3000, SW1B, PFUZE100_SW1CVOL, 700000, 1475000, 25000), + PFUZE100_SWB_REG(PFUZE3000, SW2, PFUZE100_SW2VOL, 0x7, pfuze3000_sw2lo), + PFUZE3000_SW3_REG(PFUZE3000, SW3, PFUZE100_SW3AVOL, 900000, 1650000, 50000), + PFUZE100_SWB_REG(PFUZE3000, SWBST, PFUZE100_SWBSTCON1, 0x3, pfuze100_swbst), + PFUZE100_SWB_REG(PFUZE3000, VSNVS, PFUZE100_VSNVSVOL, 0x7, pfuze100_vsnvs), + PFUZE100_FIXED_REG(PFUZE3000, VREFDDR, PFUZE100_VREFDDRCON, 750000), + PFUZE100_VGEN_REG(PFUZE3000, VLDO1, PFUZE100_VGEN1VOL, 1800000, 3300000, 100000), + PFUZE100_VGEN_REG(PFUZE3000, VLDO2, PFUZE100_VGEN2VOL, 800000, 1550000, 50000), + PFUZE3000_VCC_REG(PFUZE3000, VCCSD, PFUZE100_VGEN3VOL, 2850000, 3300000, 150000), + PFUZE3000_VCC_REG(PFUZE3000, V33, PFUZE100_VGEN4VOL, 2850000, 3300000, 150000), + PFUZE100_VGEN_REG(PFUZE3000, VLDO3, PFUZE100_VGEN5VOL, 1800000, 3300000, 100000), + PFUZE100_VGEN_REG(PFUZE3000, VLDO4, PFUZE100_VGEN6VOL, 1800000, 3300000, 100000), +}; + static struct pfuze_regulator *pfuze_regulators; #ifdef CONFIG_OF @@ -294,6 +374,24 @@ static struct of_regulator_match pfuze200_matches[] = { { .name = "vgen6", }, }; +/* PFUZE3000 */ +static struct of_regulator_match pfuze3000_matches[] = { + + { .name = "sw1a", }, + { .name = "sw1b", }, + { .name = "sw2", }, + { .name = "sw3", }, + { .name = "swbst", }, + { .name = "vsnvs", }, + { .name = "vrefddr", }, + { .name = "vldo1", }, + { .name = "vldo2", }, + { .name = "vccsd", }, + { .name = "v33", }, + { .name = "vldo3", }, + { .name = "vldo4", }, +}; + static struct of_regulator_match *pfuze_matches; static int pfuze_parse_regulators_dt(struct pfuze_chip *chip) @@ -313,6 +411,11 @@ static int pfuze_parse_regulators_dt(struct pfuze_chip *chip) } switch (chip->chip_id) { + case PFUZE3000: + pfuze_matches = pfuze3000_matches; + ret = of_regulator_match(dev, parent, pfuze3000_matches, + ARRAY_SIZE(pfuze3000_matches)); + break; case PFUZE200: pfuze_matches = pfuze200_matches; ret = of_regulator_match(dev, parent, pfuze200_matches, @@ -378,7 +481,8 @@ static int pfuze_identify(struct pfuze_chip *pfuze_chip) * as ID=8 in PFUZE100 */ dev_info(pfuze_chip->dev, "Assuming misprogrammed ID=0x8"); - } else if ((value & 0x0f) != pfuze_chip->chip_id) { + } else if ((value & 0x0f) != pfuze_chip->chip_id && + (value & 0xf0) >> 4 != pfuze_chip->chip_id) { /* device id NOT match with your setting */ dev_warn(pfuze_chip->dev, "Illegal ID: %x\n", value); return -ENODEV; @@ -417,7 +521,7 @@ static int pfuze100_regulator_probe(struct i2c_client *client, int i, ret; const struct of_device_id *match; u32 regulator_num; - u32 sw_check_start, sw_check_end; + u32 sw_check_start, sw_check_end, sw_hi = 0x40; pfuze_chip = devm_kzalloc(&client->dev, sizeof(*pfuze_chip), GFP_KERNEL); @@ -458,13 +562,19 @@ static int pfuze100_regulator_probe(struct i2c_client *client, /* use the right regulators after identify the right device */ switch (pfuze_chip->chip_id) { + case PFUZE3000: + pfuze_regulators = pfuze3000_regulators; + regulator_num = ARRAY_SIZE(pfuze3000_regulators); + sw_check_start = PFUZE3000_SW2; + sw_check_end = PFUZE3000_SW2; + sw_hi = 1 << 3; + break; case PFUZE200: pfuze_regulators = pfuze200_regulators; regulator_num = ARRAY_SIZE(pfuze200_regulators); sw_check_start = PFUZE200_SW2; sw_check_end = PFUZE200_SW3B; break; - case PFUZE100: default: pfuze_regulators = pfuze100_regulators; @@ -474,7 +584,8 @@ static int pfuze100_regulator_probe(struct i2c_client *client, break; } dev_info(&client->dev, "pfuze%s found.\n", - (pfuze_chip->chip_id == PFUZE100) ? "100" : "200"); + (pfuze_chip->chip_id == PFUZE100) ? "100" : + ((pfuze_chip->chip_id == PFUZE200) ? "200" : "3000")); memcpy(pfuze_chip->regulator_descs, pfuze_regulators, sizeof(pfuze_chip->regulator_descs)); @@ -498,10 +609,15 @@ static int pfuze100_regulator_probe(struct i2c_client *client, /* SW2~SW4 high bit check and modify the voltage value table */ if (i >= sw_check_start && i <= sw_check_end) { regmap_read(pfuze_chip->regmap, desc->vsel_reg, &val); - if (val & 0x40) { - desc->min_uV = 800000; - desc->uV_step = 50000; - desc->n_voltages = 51; + if (val & sw_hi) { + if (pfuze_chip->chip_id == PFUZE3000) { + desc->volt_table = pfuze3000_sw2hi; + desc->n_voltages = ARRAY_SIZE(pfuze3000_sw2hi); + } else { + desc->min_uV = 800000; + desc->uV_step = 50000; + desc->n_voltages = 51; + } } } diff --git a/drivers/regulator/qcom_rpm-regulator.c b/drivers/regulator/qcom_rpm-regulator.c index 3ab65c6..7678944 100644 --- a/drivers/regulator/qcom_rpm-regulator.c +++ b/drivers/regulator/qcom_rpm-regulator.c @@ -674,6 +674,7 @@ static int rpm_reg_probe(struct platform_device *pdev) vreg->desc.owner = THIS_MODULE; vreg->desc.type = REGULATOR_VOLTAGE; vreg->desc.name = pdev->dev.of_node->name; + vreg->desc.supply_name = "vin"; vreg->rpm = dev_get_drvdata(pdev->dev.parent); if (!vreg->rpm) { diff --git a/include/linux/regulator/mt6397-regulator.h b/include/linux/regulator/mt6397-regulator.h new file mode 100644 index 0000000..30cc596 --- /dev/null +++ b/include/linux/regulator/mt6397-regulator.h @@ -0,0 +1,49 @@ +/* + * Copyright (c) 2014 MediaTek Inc. + * Author: Flora Fu <flora.fu@mediatek.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __LINUX_REGULATOR_MT6397_H +#define __LINUX_REGULATOR_MT6397_H + +enum { + MT6397_ID_VPCA15 = 0, + MT6397_ID_VPCA7, + MT6397_ID_VSRAMCA15, + MT6397_ID_VSRAMCA7, + MT6397_ID_VCORE, + MT6397_ID_VGPU, + MT6397_ID_VDRM, + MT6397_ID_VIO18 = 7, + MT6397_ID_VTCXO, + MT6397_ID_VA28, + MT6397_ID_VCAMA, + MT6397_ID_VIO28, + MT6397_ID_VUSB, + MT6397_ID_VMC, + MT6397_ID_VMCH, + MT6397_ID_VEMC3V3, + MT6397_ID_VGP1, + MT6397_ID_VGP2, + MT6397_ID_VGP3, + MT6397_ID_VGP4, + MT6397_ID_VGP5, + MT6397_ID_VGP6, + MT6397_ID_VIBR, + MT6397_ID_RG_MAX, +}; + +#define MT6397_MAX_REGULATOR MT6397_ID_RG_MAX +#define MT6397_REGULATOR_ID97 0x97 +#define MT6397_REGULATOR_ID91 0x91 + +#endif /* __LINUX_REGULATOR_MT6397_H */ diff --git a/include/linux/regulator/pfuze100.h b/include/linux/regulator/pfuze100.h index 364f7a7..70c6c66 100644 --- a/include/linux/regulator/pfuze100.h +++ b/include/linux/regulator/pfuze100.h @@ -49,6 +49,20 @@ #define PFUZE200_VGEN5 11 #define PFUZE200_VGEN6 12 +#define PFUZE3000_SW1A 0 +#define PFUZE3000_SW1B 1 +#define PFUZE3000_SW2 2 +#define PFUZE3000_SW3 3 +#define PFUZE3000_SWBST 4 +#define PFUZE3000_VSNVS 5 +#define PFUZE3000_VREFDDR 6 +#define PFUZE3000_VLDO1 7 +#define PFUZE3000_VLDO2 8 +#define PFUZE3000_VCCSD 9 +#define PFUZE3000_V33 10 +#define PFUZE3000_VLDO3 11 +#define PFUZE3000_VLDO4 12 + struct regulator_init_data; struct pfuze_regulator_platform_data { |