diff options
-rw-r--r-- | arch/x86/kernel/acpi/boot.c | 2 | ||||
-rw-r--r-- | drivers/acpi/acpi_lpss.c | 12 | ||||
-rw-r--r-- | drivers/acpi/acpi_platform.c | 6 | ||||
-rw-r--r-- | drivers/acpi/button.c | 9 | ||||
-rw-r--r-- | drivers/acpi/ec.c | 49 | ||||
-rw-r--r-- | drivers/acpi/osl.c | 4 | ||||
-rw-r--r-- | drivers/acpi/sysfs.c | 9 | ||||
-rw-r--r-- | drivers/acpi/thermal.c | 43 | ||||
-rw-r--r-- | drivers/acpi/utils.c | 17 |
9 files changed, 85 insertions, 66 deletions
diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index 1f7c074..6c0b43b 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -695,7 +695,7 @@ static int __init acpi_parse_sbf(struct acpi_table_header *table) #ifdef CONFIG_HPET_TIMER #include <asm/hpet.h> -static struct __initdata resource *hpet_res; +static struct resource *hpet_res __initdata; static int __init acpi_parse_hpet(struct acpi_table_header *table) { diff --git a/drivers/acpi/acpi_lpss.c b/drivers/acpi/acpi_lpss.c index fb78bb9..d396101 100644 --- a/drivers/acpi/acpi_lpss.c +++ b/drivers/acpi/acpi_lpss.c @@ -30,6 +30,7 @@ ACPI_MODULE_NAME("acpi_lpss"); /* Offsets relative to LPSS_PRIVATE_OFFSET */ #define LPSS_GENERAL 0x08 #define LPSS_GENERAL_LTR_MODE_SW BIT(2) +#define LPSS_GENERAL_UART_RTS_OVRD BIT(3) #define LPSS_SW_LTR 0x10 #define LPSS_AUTO_LTR 0x14 #define LPSS_TX_INT 0x20 @@ -68,11 +69,16 @@ struct lpss_private_data { static void lpss_uart_setup(struct lpss_private_data *pdata) { - unsigned int tx_int_offset = pdata->dev_desc->prv_offset + LPSS_TX_INT; + unsigned int offset; u32 reg; - reg = readl(pdata->mmio_base + tx_int_offset); - writel(reg | LPSS_TX_INT_MASK, pdata->mmio_base + tx_int_offset); + offset = pdata->dev_desc->prv_offset + LPSS_TX_INT; + reg = readl(pdata->mmio_base + offset); + writel(reg | LPSS_TX_INT_MASK, pdata->mmio_base + offset); + + offset = pdata->dev_desc->prv_offset + LPSS_GENERAL; + reg = readl(pdata->mmio_base + offset); + writel(reg | LPSS_GENERAL_UART_RTS_OVRD, pdata->mmio_base + offset); } static struct lpss_device_desc lpt_dev_desc = { diff --git a/drivers/acpi/acpi_platform.c b/drivers/acpi/acpi_platform.c index c20b02b..8a4cfc7 100644 --- a/drivers/acpi/acpi_platform.c +++ b/drivers/acpi/acpi_platform.c @@ -31,6 +31,12 @@ static const struct acpi_device_id acpi_platform_device_ids[] = { { "PNP0D40" }, { "ACPI0003" }, { "VPC2004" }, + { "BCM4752" }, + + /* Intel Smart Sound Technology */ + { "INT33C8" }, + { "80860F28" }, + { } }; diff --git a/drivers/acpi/button.c b/drivers/acpi/button.c index a557738..c971929 100644 --- a/drivers/acpi/button.c +++ b/drivers/acpi/button.c @@ -383,18 +383,15 @@ static int acpi_button_add(struct acpi_device *device) switch (button->type) { case ACPI_BUTTON_TYPE_POWER: - input->evbit[0] = BIT_MASK(EV_KEY); - set_bit(KEY_POWER, input->keybit); + input_set_capability(input, EV_KEY, KEY_POWER); break; case ACPI_BUTTON_TYPE_SLEEP: - input->evbit[0] = BIT_MASK(EV_KEY); - set_bit(KEY_SLEEP, input->keybit); + input_set_capability(input, EV_KEY, KEY_SLEEP); break; case ACPI_BUTTON_TYPE_LID: - input->evbit[0] = BIT_MASK(EV_SW); - set_bit(SW_LID, input->swbit); + input_set_capability(input, EV_SW, SW_LID); break; } diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index a06d983..d5309fd 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -28,6 +28,7 @@ /* Uncomment next line to get verbose printout */ /* #define DEBUG */ +#define pr_fmt(fmt) "ACPI : EC: " fmt #include <linux/kernel.h> #include <linux/module.h> @@ -49,9 +50,6 @@ #define ACPI_EC_DEVICE_NAME "Embedded Controller" #define ACPI_EC_FILE_INFO "info" -#undef PREFIX -#define PREFIX "ACPI: EC: " - /* EC status register */ #define ACPI_EC_FLAG_OBF 0x01 /* Output buffer full */ #define ACPI_EC_FLAG_IBF 0x02 /* Input buffer full */ @@ -131,26 +129,26 @@ static int EC_FLAGS_SKIP_DSDT_SCAN; /* Not all BIOS survive early DSDT scan */ static inline u8 acpi_ec_read_status(struct acpi_ec *ec) { u8 x = inb(ec->command_addr); - pr_debug(PREFIX "---> status = 0x%2.2x\n", x); + pr_debug("---> status = 0x%2.2x\n", x); return x; } static inline u8 acpi_ec_read_data(struct acpi_ec *ec) { u8 x = inb(ec->data_addr); - pr_debug(PREFIX "---> data = 0x%2.2x\n", x); + pr_debug("---> data = 0x%2.2x\n", x); return x; } static inline void acpi_ec_write_cmd(struct acpi_ec *ec, u8 command) { - pr_debug(PREFIX "<--- command = 0x%2.2x\n", command); + pr_debug("<--- command = 0x%2.2x\n", command); outb(command, ec->command_addr); } static inline void acpi_ec_write_data(struct acpi_ec *ec, u8 data) { - pr_debug(PREFIX "<--- data = 0x%2.2x\n", data); + pr_debug("<--- data = 0x%2.2x\n", data); outb(data, ec->data_addr); } @@ -241,7 +239,7 @@ static int ec_poll(struct acpi_ec *ec) } advance_transaction(ec, acpi_ec_read_status(ec)); } while (time_before(jiffies, delay)); - pr_debug(PREFIX "controller reset, restart transaction\n"); + pr_debug("controller reset, restart transaction\n"); spin_lock_irqsave(&ec->lock, flags); start_transaction(ec); spin_unlock_irqrestore(&ec->lock, flags); @@ -309,12 +307,12 @@ static int acpi_ec_transaction(struct acpi_ec *ec, struct transaction *t) } } if (ec_wait_ibf0(ec)) { - pr_err(PREFIX "input buffer is not empty, " + pr_err("input buffer is not empty, " "aborting transaction\n"); status = -ETIME; goto end; } - pr_debug(PREFIX "transaction start (cmd=0x%02x, addr=0x%02x)\n", + pr_debug("transaction start (cmd=0x%02x, addr=0x%02x)\n", t->command, t->wdata ? t->wdata[0] : 0); /* disable GPE during transaction if storm is detected */ if (test_bit(EC_FLAGS_GPE_STORM, &ec->flags)) { @@ -331,12 +329,12 @@ static int acpi_ec_transaction(struct acpi_ec *ec, struct transaction *t) /* It is safe to enable the GPE outside of the transaction. */ acpi_enable_gpe(NULL, ec->gpe); } else if (t->irq_count > ec_storm_threshold) { - pr_info(PREFIX "GPE storm detected(%d GPEs), " + pr_info("GPE storm detected(%d GPEs), " "transactions will use polling mode\n", t->irq_count); set_bit(EC_FLAGS_GPE_STORM, &ec->flags); } - pr_debug(PREFIX "transaction end\n"); + pr_debug("transaction end\n"); end: if (ec->global_lock) acpi_release_global_lock(glk); @@ -570,12 +568,12 @@ static void acpi_ec_run(void *cxt) struct acpi_ec_query_handler *handler = cxt; if (!handler) return; - pr_debug(PREFIX "start query execution\n"); + pr_debug("start query execution\n"); if (handler->func) handler->func(handler->data); else if (handler->handle) acpi_evaluate_object(handler->handle, NULL, NULL, NULL); - pr_debug(PREFIX "stop query execution\n"); + pr_debug("stop query execution\n"); kfree(handler); } @@ -593,7 +591,8 @@ static int acpi_ec_sync_query(struct acpi_ec *ec) if (!copy) return -ENOMEM; memcpy(copy, handler, sizeof(*copy)); - pr_debug(PREFIX "push query execution (0x%2x) on queue\n", value); + pr_debug("push query execution (0x%2x) on queue\n", + value); return acpi_os_execute((copy->func) ? OSL_NOTIFY_HANDLER : OSL_GPE_HANDLER, acpi_ec_run, copy); @@ -616,7 +615,7 @@ static int ec_check_sci(struct acpi_ec *ec, u8 state) { if (state & ACPI_EC_FLAG_SCI) { if (!test_and_set_bit(EC_FLAGS_QUERY_PENDING, &ec->flags)) { - pr_debug(PREFIX "push gpe query to the queue\n"); + pr_debug("push gpe query to the queue\n"); return acpi_os_execute(OSL_NOTIFY_HANDLER, acpi_ec_gpe_query, ec); } @@ -630,7 +629,7 @@ static u32 acpi_ec_gpe_handler(acpi_handle gpe_device, struct acpi_ec *ec = data; u8 status = acpi_ec_read_status(ec); - pr_debug(PREFIX "~~~> interrupt, status:0x%02x\n", status); + pr_debug("~~~> interrupt, status:0x%02x\n", status); advance_transaction(ec, status); if (ec_transaction_done(ec) && @@ -776,7 +775,7 @@ static int ec_install_handlers(struct acpi_ec *ec) * The AE_NOT_FOUND error will be ignored and OS * continue to initialize EC. */ - printk(KERN_ERR "Fail in evaluating the _REG object" + pr_err("Fail in evaluating the _REG object" " of EC device. Broken bios is suspected.\n"); } else { acpi_remove_gpe_handler(NULL, ec->gpe, @@ -795,10 +794,10 @@ static void ec_remove_handlers(struct acpi_ec *ec) acpi_disable_gpe(NULL, ec->gpe); if (ACPI_FAILURE(acpi_remove_address_space_handler(ec->handle, ACPI_ADR_SPACE_EC, &acpi_ec_space_handler))) - pr_err(PREFIX "failed to remove space handler\n"); + pr_err("failed to remove space handler\n"); if (ACPI_FAILURE(acpi_remove_gpe_handler(NULL, ec->gpe, &acpi_ec_gpe_handler))) - pr_err(PREFIX "failed to remove gpe handler\n"); + pr_err("failed to remove gpe handler\n"); clear_bit(EC_FLAGS_HANDLERS_INSTALLED, &ec->flags); } @@ -840,7 +839,7 @@ static int acpi_ec_add(struct acpi_device *device) ret = !!request_region(ec->command_addr, 1, "EC cmd"); WARN(!ret, "Could not request EC cmd io port 0x%lx", ec->command_addr); - pr_info(PREFIX "GPE = 0x%lx, I/O: command/status = 0x%lx, data = 0x%lx\n", + pr_info("GPE = 0x%lx, I/O: command/status = 0x%lx, data = 0x%lx\n", ec->gpe, ec->command_addr, ec->data_addr); ret = ec_install_handlers(ec); @@ -931,7 +930,7 @@ static int ec_validate_ecdt(const struct dmi_system_id *id) /* MSI EC needs special treatment, enable it */ static int ec_flag_msi(const struct dmi_system_id *id) { - printk(KERN_DEBUG PREFIX "Detected MSI hardware, enabling workarounds.\n"); + pr_debug("Detected MSI hardware, enabling workarounds.\n"); EC_FLAGS_MSI = 1; EC_FLAGS_VALIDATE_ECDT = 1; return 0; @@ -1010,7 +1009,7 @@ int __init acpi_ec_ecdt_probe(void) status = acpi_get_table(ACPI_SIG_ECDT, 1, (struct acpi_table_header **)&ecdt_ptr); if (ACPI_SUCCESS(status)) { - pr_info(PREFIX "EC description table is found, configuring boot EC\n"); + pr_info("EC description table is found, configuring boot EC\n"); boot_ec->command_addr = ecdt_ptr->control.address; boot_ec->data_addr = ecdt_ptr->data.address; boot_ec->gpe = ecdt_ptr->gpe; @@ -1030,7 +1029,7 @@ int __init acpi_ec_ecdt_probe(void) /* This workaround is needed only on some broken machines, * which require early EC, but fail to provide ECDT */ - printk(KERN_DEBUG PREFIX "Look up EC in DSDT\n"); + pr_debug("Look up EC in DSDT\n"); status = acpi_get_devices(ec_device_ids[0].id, ec_parse_device, boot_ec, NULL); /* Check that acpi_get_devices actually find something */ @@ -1042,7 +1041,7 @@ int __init acpi_ec_ecdt_probe(void) saved_ec->data_addr != boot_ec->data_addr || saved_ec->gpe != boot_ec->gpe || saved_ec->handle != boot_ec->handle) - pr_info(PREFIX "ASUSTek keeps feeding us with broken " + pr_info("ASUSTek keeps feeding us with broken " "ECDT tables, which are very hard to workaround. " "Trying to use DSDT EC info instead. Please send " "output of acpidump to linux-acpi@vger.kernel.org\n"); diff --git a/drivers/acpi/osl.c b/drivers/acpi/osl.c index 88bb9d0..a0c09ad 100644 --- a/drivers/acpi/osl.c +++ b/drivers/acpi/osl.c @@ -840,7 +840,7 @@ acpi_status acpi_os_remove_interrupt_handler(u32 irq, acpi_osd_handler handler) void acpi_os_sleep(u64 ms) { - schedule_timeout_interruptible(msecs_to_jiffies(ms)); + msleep(ms); } void acpi_os_stall(u32 us) @@ -1355,7 +1355,7 @@ static int __init acpi_os_name_setup(char *str) if (!str || !*str) return 0; - for (; count-- && str && *str; str++) { + for (; count-- && *str; str++) { if (isalnum(*str) || *str == ' ' || *str == ':') *p++ = *str; else if (*str == '\'' || *str == '"') diff --git a/drivers/acpi/sysfs.c b/drivers/acpi/sysfs.c index bb6045c..db52936 100644 --- a/drivers/acpi/sysfs.c +++ b/drivers/acpi/sysfs.c @@ -564,6 +564,7 @@ static ssize_t counter_set(struct kobject *kobj, acpi_event_status status; acpi_handle handle; int result = 0; + unsigned long tmp; if (index == num_gpes + ACPI_NUM_FIXED_EVENTS + COUNT_SCI) { int i; @@ -596,8 +597,10 @@ static ssize_t counter_set(struct kobject *kobj, else if (!strcmp(buf, "clear\n") && (status & ACPI_EVENT_FLAG_SET)) result = acpi_clear_gpe(handle, index); + else if (!kstrtoul(buf, 0, &tmp)) + all_counters[index].count = tmp; else - all_counters[index].count = strtoul(buf, NULL, 0); + result = -EINVAL; } else if (index < num_gpes + ACPI_NUM_FIXED_EVENTS) { int event = index - num_gpes; if (!strcmp(buf, "disable\n") && @@ -609,8 +612,10 @@ static ssize_t counter_set(struct kobject *kobj, else if (!strcmp(buf, "clear\n") && (status & ACPI_EVENT_FLAG_SET)) result = acpi_clear_event(event); + else if (!kstrtoul(buf, 0, &tmp)) + all_counters[index].count = tmp; else - all_counters[index].count = strtoul(buf, NULL, 0); + result = -EINVAL; } else all_counters[index].count = strtoul(buf, NULL, 0); diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c index 6a03293..e600b5d 100644 --- a/drivers/acpi/thermal.c +++ b/drivers/acpi/thermal.c @@ -299,8 +299,8 @@ static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag) ACPI_DEBUG_PRINT((ACPI_DB_INFO, "No critical threshold\n")); } else if (tmp <= 2732) { - printk(KERN_WARNING FW_BUG "Invalid critical threshold " - "(%llu)\n", tmp); + pr_warn(FW_BUG "Invalid critical threshold (%llu)\n", + tmp); tz->trips.critical.flags.valid = 0; } else { tz->trips.critical.flags.valid = 1; @@ -317,8 +317,8 @@ static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag) * Allow override critical threshold */ if (crt_k > tz->trips.critical.temperature) - printk(KERN_WARNING PREFIX - "Critical threshold %d C\n", crt); + pr_warn(PREFIX "Critical threshold %d C\n", + crt); tz->trips.critical.temperature = crt_k; } } @@ -390,8 +390,7 @@ static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag) status = acpi_evaluate_reference(tz->device->handle, "_PSL", NULL, &devices); if (ACPI_FAILURE(status)) { - printk(KERN_WARNING PREFIX - "Invalid passive threshold\n"); + pr_warn(PREFIX "Invalid passive threshold\n"); tz->trips.passive.flags.valid = 0; } else @@ -453,8 +452,8 @@ static int acpi_thermal_trips_update(struct acpi_thermal *tz, int flag) status = acpi_evaluate_reference(tz->device->handle, name, NULL, &devices); if (ACPI_FAILURE(status)) { - printk(KERN_WARNING PREFIX - "Invalid active%d threshold\n", i); + pr_warn(PREFIX "Invalid active%d threshold\n", + i); tz->trips.active[i].flags.valid = 0; } else @@ -505,7 +504,7 @@ static int acpi_thermal_get_trip_points(struct acpi_thermal *tz) valid |= tz->trips.active[i].flags.valid; if (!valid) { - printk(KERN_WARNING FW_BUG "No valid trip found\n"); + pr_warn(FW_BUG "No valid trip found\n"); return -ENODEV; } return 0; @@ -923,8 +922,7 @@ static int acpi_thermal_register_thermal_zone(struct acpi_thermal *tz) acpi_bus_private_data_handler, tz->thermal_zone); if (ACPI_FAILURE(status)) { - printk(KERN_ERR PREFIX - "Error attaching device data\n"); + pr_err(PREFIX "Error attaching device data\n"); return -ENODEV; } @@ -1094,9 +1092,8 @@ static int acpi_thermal_add(struct acpi_device *device) if (result) goto free_memory; - printk(KERN_INFO PREFIX "%s [%s] (%ld C)\n", - acpi_device_name(device), acpi_device_bid(device), - KELVIN_TO_CELSIUS(tz->temperature)); + pr_info(PREFIX "%s [%s] (%ld C)\n", acpi_device_name(device), + acpi_device_bid(device), KELVIN_TO_CELSIUS(tz->temperature)); goto end; free_memory: @@ -1159,24 +1156,24 @@ static int acpi_thermal_resume(struct device *dev) static int thermal_act(const struct dmi_system_id *d) { if (act == 0) { - printk(KERN_NOTICE "ACPI: %s detected: " - "disabling all active thermal trip points\n", d->ident); + pr_notice(PREFIX "%s detected: " + "disabling all active thermal trip points\n", d->ident); act = -1; } return 0; } static int thermal_nocrt(const struct dmi_system_id *d) { - printk(KERN_NOTICE "ACPI: %s detected: " - "disabling all critical thermal trip point actions.\n", d->ident); + pr_notice(PREFIX "%s detected: " + "disabling all critical thermal trip point actions.\n", d->ident); nocrt = 1; return 0; } static int thermal_tzp(const struct dmi_system_id *d) { if (tzp == 0) { - printk(KERN_NOTICE "ACPI: %s detected: " - "enabling thermal zone polling\n", d->ident); + pr_notice(PREFIX "%s detected: " + "enabling thermal zone polling\n", d->ident); tzp = 300; /* 300 dS = 30 Seconds */ } return 0; @@ -1184,8 +1181,8 @@ static int thermal_tzp(const struct dmi_system_id *d) { static int thermal_psv(const struct dmi_system_id *d) { if (psv == 0) { - printk(KERN_NOTICE "ACPI: %s detected: " - "disabling all passive thermal trip points\n", d->ident); + pr_notice(PREFIX "%s detected: " + "disabling all passive thermal trip points\n", d->ident); psv = -1; } return 0; @@ -1238,7 +1235,7 @@ static int __init acpi_thermal_init(void) dmi_check_system(thermal_dmi_table); if (off) { - printk(KERN_NOTICE "ACPI: thermal control disabled\n"); + pr_notice(PREFIX "thermal control disabled\n"); return -ENODEV; } diff --git a/drivers/acpi/utils.c b/drivers/acpi/utils.c index 552248b..fc2cd32 100644 --- a/drivers/acpi/utils.c +++ b/drivers/acpi/utils.c @@ -169,11 +169,20 @@ acpi_extract_package(union acpi_object *package, /* * Validate output buffer. */ - if (buffer->length < size_required) { + if (buffer->length == ACPI_ALLOCATE_BUFFER) { + buffer->pointer = ACPI_ALLOCATE(size_required); + if (!buffer->pointer) + return AE_NO_MEMORY; buffer->length = size_required; - return AE_BUFFER_OVERFLOW; - } else if (buffer->length != size_required || !buffer->pointer) { - return AE_BAD_PARAMETER; + memset(buffer->pointer, 0, size_required); + } else { + if (buffer->length < size_required) { + buffer->length = size_required; + return AE_BUFFER_OVERFLOW; + } else if (buffer->length != size_required || + !buffer->pointer) { + return AE_BAD_PARAMETER; + } } head = buffer->pointer; |