diff options
| -rw-r--r-- | arch/powerpc/boot/dts/mpc8610_hpcd.dts | 23 | ||||
| -rw-r--r-- | arch/powerpc/sysdev/fsl_rio.c | 9 | ||||
| -rw-r--r-- | arch/powerpc/sysdev/fsl_soc.c | 4 | ||||
| -rw-r--r-- | arch/powerpc/sysdev/xilinx_intc.c | 2 | ||||
| -rw-r--r-- | drivers/char/xilinx_hwicap/xilinx_hwicap.c | 6 | ||||
| -rw-r--r-- | include/linux/rio.h | 2 |
6 files changed, 37 insertions, 9 deletions
diff --git a/arch/powerpc/boot/dts/mpc8610_hpcd.dts b/arch/powerpc/boot/dts/mpc8610_hpcd.dts index 1f2f1e0..bba234e 100644 --- a/arch/powerpc/boot/dts/mpc8610_hpcd.dts +++ b/arch/powerpc/boot/dts/mpc8610_hpcd.dts @@ -21,6 +21,7 @@ serial1 = &serial1; pci0 = &pci0; pci1 = &pci1; + pci2 = &pci2; }; cpus { @@ -105,7 +106,7 @@ compatible = "ns16550"; reg = <0x4600 0x100>; clock-frequency = <0>; - interrupts = <28 2>; + interrupts = <42 2>; interrupt-parent = <&mpic>; }; @@ -322,4 +323,24 @@ }; }; }; + + pci2: pcie@e0009000 { + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + device_type = "pci"; + compatible = "fsl,mpc8641-pcie"; + reg = <0xe0009000 0x00001000>; + ranges = <0x02000000 0 0x90000000 0x90000000 0 0x10000000 + 0x01000000 0 0x00000000 0xe2000000 0 0x00100000>; + bus-range = <0 255>; + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = <0x0000 0 0 1 &mpic 4 1 + 0x0000 0 0 2 &mpic 5 1 + 0x0000 0 0 3 &mpic 6 1 + 0x0000 0 0 4 &mpic 7 1>; + interrupt-parent = <&mpic>; + interrupts = <25 2>; + clock-frequency = <33333333>; + }; }; diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c index 3d92037..a0fa4eb 100644 --- a/arch/powerpc/sysdev/fsl_rio.c +++ b/arch/powerpc/sysdev/fsl_rio.c @@ -176,6 +176,7 @@ struct rio_priv { /** * fsl_rio_doorbell_send - Send a MPC85xx doorbell message + * @mport: RapidIO master port info * @index: ID of RapidIO interface * @destid: Destination ID of target device * @data: 16-bit info field of RapidIO doorbell message @@ -211,6 +212,7 @@ static int fsl_rio_doorbell_send(struct rio_mport *mport, /** * fsl_local_config_read - Generate a MPC85xx local config space read + * @mport: RapidIO master port info * @index: ID of RapdiIO interface * @offset: Offset into configuration space * @len: Length (in bytes) of the maintenance transaction @@ -232,6 +234,7 @@ static int fsl_local_config_read(struct rio_mport *mport, /** * fsl_local_config_write - Generate a MPC85xx local config space write + * @mport: RapidIO master port info * @index: ID of RapdiIO interface * @offset: Offset into configuration space * @len: Length (in bytes) of the maintenance transaction @@ -254,6 +257,7 @@ static int fsl_local_config_write(struct rio_mport *mport, /** * fsl_rio_config_read - Generate a MPC85xx read maintenance transaction + * @mport: RapidIO master port info * @index: ID of RapdiIO interface * @destid: Destination ID of transaction * @hopcount: Number of hops to target device @@ -295,6 +299,7 @@ fsl_rio_config_read(struct rio_mport *mport, int index, u16 destid, /** * fsl_rio_config_write - Generate a MPC85xx write maintenance transaction + * @mport: RapidIO master port info * @index: ID of RapdiIO interface * @destid: Destination ID of transaction * @hopcount: Number of hops to target device @@ -985,8 +990,8 @@ static inline void fsl_rio_info(struct device *dev, u32 ccsr) } /** - * fsl_rio_setup - Setup MPC85xx RapidIO interface - * @fsl_rio_setup - Setup Freescale PowerPC RapidIO interface + * fsl_rio_setup - Setup Freescale PowerPC RapidIO interface + * @dev: of_device pointer * * Initializes MPC85xx RapidIO hardware interface, configures * master port with system-specific info, and registers the diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c index 7b45670..b594087 100644 --- a/arch/powerpc/sysdev/fsl_soc.c +++ b/arch/powerpc/sysdev/fsl_soc.c @@ -389,8 +389,8 @@ static int __init gfar_of_init(void) } gfar_data.phy_id = *id; - snprintf(gfar_data.bus_id, MII_BUS_ID_SIZE, "%x", - res.start); + snprintf(gfar_data.bus_id, MII_BUS_ID_SIZE, "%llx", + (unsigned long long)res.start); of_node_put(phy); of_node_put(mdio); diff --git a/arch/powerpc/sysdev/xilinx_intc.c b/arch/powerpc/sysdev/xilinx_intc.c index ba8eea2..b7aefd0 100644 --- a/arch/powerpc/sysdev/xilinx_intc.c +++ b/arch/powerpc/sysdev/xilinx_intc.c @@ -107,7 +107,7 @@ xilinx_intc_init(struct device_node *np) } regs = ioremap(res.start, 32); - printk(KERN_INFO "Xilinx intc at 0x%08X mapped to 0x%p\n", + printk(KERN_INFO "Xilinx intc at 0x%08LX mapped to 0x%p\n", res.start, regs); /* Setup interrupt controller */ diff --git a/drivers/char/xilinx_hwicap/xilinx_hwicap.c b/drivers/char/xilinx_hwicap/xilinx_hwicap.c index dfe6907..3edf1fc 100644 --- a/drivers/char/xilinx_hwicap/xilinx_hwicap.c +++ b/drivers/char/xilinx_hwicap/xilinx_hwicap.c @@ -623,8 +623,8 @@ static int __devinit hwicap_setup(struct device *dev, int id, if (!request_mem_region(drvdata->mem_start, drvdata->mem_size, DRIVER_NAME)) { - dev_err(dev, "Couldn't lock memory region at %p\n", - (void *)regs_res->start); + dev_err(dev, "Couldn't lock memory region at %Lx\n", + regs_res->start); retval = -EBUSY; goto failed1; } @@ -643,7 +643,7 @@ static int __devinit hwicap_setup(struct device *dev, int id, mutex_init(&drvdata->sem); drvdata->is_open = 0; - dev_info(dev, "ioremap %lx to %p with size %x\n", + dev_info(dev, "ioremap %lx to %p with size %Lx\n", (unsigned long int)drvdata->mem_start, drvdata->base_address, drvdata->mem_size); diff --git a/include/linux/rio.h b/include/linux/rio.h index cfb66bb..0201849 100644 --- a/include/linux/rio.h +++ b/include/linux/rio.h @@ -163,6 +163,8 @@ enum rio_phy_type { * @ops: configuration space functions * @id: Port ID, unique among all ports * @index: Port index, unique among all port interfaces of the same type + * @sys_size: RapidIO common transport system size + * @phy_type: RapidIO phy type * @name: Port name string * @priv: Master port private data */ |