diff options
209 files changed, 4302 insertions, 3493 deletions
diff --git a/Documentation/devicetree/bindings/arm/arm-boards b/Documentation/devicetree/bindings/arm/arm-boards index 91f2614..fc81a7d 100644 --- a/Documentation/devicetree/bindings/arm/arm-boards +++ b/Documentation/devicetree/bindings/arm/arm-boards @@ -1,3 +1,15 @@ +ARM Integrator/AP (Application Platform) and Integrator/CP (Compact Platform) +----------------------------------------------------------------------------- +ARM's oldest Linux-supported platform with connectors for different core +tiles of ARMv4, ARMv5 and ARMv6 type. + +Required properties (in root node): + compatible = "arm,integrator-ap"; /* Application Platform */ + compatible = "arm,integrator-cp"; /* Compact Platform */ + +FPGA type interrupt controllers, see the versatile-fpga-irq binding doc. + + ARM Versatile Application and Platform Baseboards ------------------------------------------------- ARM's development hardware platform with connectors for customizable diff --git a/Documentation/devicetree/bindings/arm/versatile-fpga-irq.txt b/Documentation/devicetree/bindings/arm/versatile-fpga-irq.txt new file mode 100644 index 0000000..9989eda --- /dev/null +++ b/Documentation/devicetree/bindings/arm/versatile-fpga-irq.txt @@ -0,0 +1,31 @@ +* ARM Versatile FPGA interrupt controller + +One or more FPGA IRQ controllers can be synthesized in an ARM reference board +such as the Integrator or Versatile family. The output of these different +controllers are OR:ed together and fed to the CPU tile's IRQ input. Each +instance can handle up to 32 interrupts. + +Required properties: +- compatible: "arm,versatile-fpga-irq" +- interrupt-controller: Identifies the node as an interrupt controller +- #interrupt-cells: The number of cells to define the interrupts. Must be 1 + as the FPGA IRQ controller has no configuration options for interrupt + sources. The cell is a u32 and defines the interrupt number. +- reg: The register bank for the FPGA interrupt controller. +- clear-mask: a u32 number representing the mask written to clear all IRQs + on the controller at boot for example. +- valid-mask: a u32 number representing a bit mask determining which of + the interrupts are valid. Unconnected/unused lines are set to 0, and + the system till not make it possible for devices to request these + interrupts. + +Example: + +pic: pic@14000000 { + compatible = "arm,versatile-fpga-irq"; + #interrupt-cells = <1>; + interrupt-controller; + reg = <0x14000000 0x100>; + clear-mask = <0xffffffff>; + valid-mask = <0x003fffff>; +}; diff --git a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt index 548892c..7da578d 100644 --- a/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt +++ b/Documentation/devicetree/bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt @@ -7,7 +7,7 @@ as "armctrl" in the SoC documentation, hence naming of this binding. Required properties: -- compatible : should be "brcm,bcm2835-armctrl-ic.txt" +- compatible : should be "brcm,bcm2835-armctrl-ic" - reg : Specifies base physical address and size of the registers. - interrupt-controller : Identifies the node as an interrupt controller - #interrupt-cells : Specifies the number of cells needed to encode an diff --git a/Documentation/devicetree/bindings/timer/brcm,bcm2835-system-timer.txt b/Documentation/devicetree/bindings/timer/brcm,bcm2835-system-timer.txt index 2de21c2..844bd5f 100644 --- a/Documentation/devicetree/bindings/timer/brcm,bcm2835-system-timer.txt +++ b/Documentation/devicetree/bindings/timer/brcm,bcm2835-system-timer.txt @@ -7,7 +7,7 @@ free running counter values, and generates an interrupt. Required properties: -- compatible : should be "brcm,bcm2835-system-timer.txt" +- compatible : should be "brcm,bcm2835-system-timer" - reg : Specifies base physical address and size of the registers. - interrupts : A list of 4 interrupt sinks; one per timer channel. - clock-frequency : The frequency of the clock that drives the counter, in Hz. diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 8ac460a..5520b03 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -16,6 +16,7 @@ config ARM select HAVE_ARCH_JUMP_LABEL if !XIP_KERNEL select HAVE_ARCH_KGDB select HAVE_ARCH_TRACEHOOK + select HAVE_SYSCALL_TRACEPOINTS select HAVE_KPROBES if !XIP_KERNEL select HAVE_KRETPROBES if (HAVE_KPROBES) select HAVE_FUNCTION_TRACER if (!XIP_KERNEL) @@ -490,7 +491,6 @@ config ARCH_IOP32X depends on MMU select CPU_XSCALE select NEED_MACH_GPIO_H - select NEED_MACH_IO_H select NEED_RET_TO_USER select PLAT_IOP select PCI @@ -504,7 +504,6 @@ config ARCH_IOP33X depends on MMU select CPU_XSCALE select NEED_MACH_GPIO_H - select NEED_MACH_IO_H select NEED_RET_TO_USER select PLAT_IOP select PCI @@ -1402,6 +1401,16 @@ config PL310_ERRATA_769419 on systems with an outer cache, the store buffer is drained explicitly. +config ARM_ERRATA_775420 + bool "ARM errata: A data cache maintenance operation which aborts, might lead to deadlock" + depends on CPU_V7 + help + This option enables the workaround for the 775420 Cortex-A9 (r2p2, + r2p6,r2p8,r2p10,r3p0) erratum. In case a date cache maintenance + operation aborts with MMU exception, it might cause the processor + to deadlock. This workaround puts DSB before executing ISB if + an abort may occur on cache maintenance. + endmenu source "arch/arm/common/Kconfig" @@ -1758,6 +1767,7 @@ source "mm/Kconfig" config FORCE_MAX_ZONEORDER int "Maximum zone order" if ARCH_SHMOBILE range 11 64 if ARCH_SHMOBILE + default "12" if SOC_AM33XX default "9" if SA1111 default "11" help @@ -1786,8 +1796,8 @@ config ALIGNMENT_TRAP configuration it is safe to say N, otherwise say Y. config UACCESS_WITH_MEMCPY - bool "Use kernel mem{cpy,set}() for {copy_to,clear}_user() (EXPERIMENTAL)" - depends on MMU && EXPERIMENTAL + bool "Use kernel mem{cpy,set}() for {copy_to,clear}_user()" + depends on MMU default y if CPU_FEROCEON help Implement faster copy_to_user and clear_user methods for CPU @@ -1828,12 +1838,6 @@ config CC_STACKPROTECTOR neutralized via a kernel panic. This feature requires gcc version 4.2 or above. -config DEPRECATED_PARAM_STRUCT - bool "Provide old way to pass kernel parameters" - help - This was deprecated in 2001 and announced to live on for 5 years. - Some old boot loaders still use this way. - config XEN_DOM0 def_bool y depends on XEN @@ -1856,6 +1860,23 @@ config USE_OF help Include support for flattened device tree machine descriptions. +config ATAGS + bool "Support for the traditional ATAGS boot data passing" if USE_OF + default y + help + This is the traditional way of passing data to the kernel at boot + time. If you are solely relying on the flattened device tree (or + the ARM_ATAG_DTB_COMPAT option) then you may unselect this option + to remove ATAGS support from your kernel binary. If unsure, + leave this to y. + +config DEPRECATED_PARAM_STRUCT + bool "Provide old way to pass kernel parameters" + depends on ATAGS + help + This was deprecated in 2001 and announced to live on for 5 years. + Some old boot loaders still use this way. + # Compressed boot loader in ROM. Yes, we really want to ask about # TEXT and BSS so we preserve their values in the config files. config ZBOOT_ROM_TEXT @@ -1982,6 +2003,7 @@ config CMDLINE choice prompt "Kernel command line type" if CMDLINE != "" default CMDLINE_FROM_BOOTLOADER + depends on ATAGS config CMDLINE_FROM_BOOTLOADER bool "Use bootloader kernel arguments if available" @@ -2051,7 +2073,7 @@ config KEXEC config ATAGS_PROC bool "Export atags in procfs" - depends on KEXEC + depends on ATAGS && KEXEC default y help Should the atags used to boot the kernel be exported in an "atags" diff --git a/arch/arm/Makefile b/arch/arm/Makefile index 40ea991..f023e3a 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -269,7 +269,12 @@ else KBUILD_IMAGE := zImage endif -all: $(KBUILD_IMAGE) +# Build the DT binary blobs if we have OF configured +ifeq ($(CONFIG_USE_OF),y) +KBUILD_DTBS := dtbs +endif + +all: $(KBUILD_IMAGE) $(KBUILD_DTBS) boot := arch/arm/boot @@ -307,7 +312,7 @@ define archhelp echo ' uImage - U-Boot wrapped zImage' echo ' bootpImage - Combined zImage and initial RAM disk' echo ' (supply initrd image via make variable INITRD=<path>)' - echo ' dtbs - Build device tree blobs for enabled boards' + echo '* dtbs - Build device tree blobs for enabled boards' echo ' install - Install uncompressed kernel' echo ' zinstall - Install compressed kernel' echo ' uinstall - Install U-Boot wrapped compressed kernel' diff --git a/arch/arm/boot/compressed/decompress.c b/arch/arm/boot/compressed/decompress.c index f41b38c..9deb56a 100644 --- a/arch/arm/boot/compressed/decompress.c +++ b/arch/arm/boot/compressed/decompress.c @@ -32,6 +32,9 @@ extern void error(char *); # define Tracecv(c,x) #endif +/* Not needed, but used in some headers pulled in by decompressors */ +extern char * strstr(const char * s1, const char *s2); + #ifdef CONFIG_KERNEL_GZIP #include "../../../../lib/decompress_inflate.c" #endif diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 29f541f0..c1ce813 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -25,14 +25,6 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \ exynos4210-trats.dtb \ exynos5250-smdk5250.dtb dtb-$(CONFIG_ARCH_HIGHBANK) += highbank.dtb -dtb-$(CONFIG_ARCH_IMX5) += imx51-babbage.dtb \ - imx53-ard.dtb \ - imx53-evk.dtb \ - imx53-qsb.dtb \ - imx53-smd.dtb -dtb-$(CONFIG_SOC_IMX6Q) += imx6q-arm2.dtb \ - imx6q-sabrelite.dtb \ - imx6q-sabresd.dtb dtb-$(CONFIG_ARCH_LPC32XX) += ea3250.dtb phy3250.dtb dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-dns320.dtb \ kirkwood-dns325.dtb \ @@ -76,7 +68,9 @@ dtb-$(CONFIG_ARCH_OMAP2PLUS) += omap2420-h4.dtb \ omap4-pandaES.dtb \ omap4-var_som.dtb \ omap4-sdp.dtb \ - omap5-evm.dtb + omap5-evm.dtb \ + am335x-evm.dtb \ + am335x-bone.dtb dtb-$(CONFIG_ARCH_PRIMA2) += prima2-evb.dtb dtb-$(CONFIG_ARCH_U8500) += snowball.dtb dtb-$(CONFIG_ARCH_SHMOBILE) += emev2-kzm9d.dtb \ @@ -104,5 +98,8 @@ dtb-$(CONFIG_ARCH_VEXPRESS) += vexpress-v2p-ca5s.dtb \ vexpress-v2p-ca15-tc1.dtb \ vexpress-v2p-ca15_a7.dtb \ xenvm-4.2.dtb +dtb-$(CONFIG_ARCH_VT8500) += vt8500-bv07.dtb \ + wm8505-ref.dtb \ + wm8650-mid.dtb endif diff --git a/arch/arm/boot/dts/integrator.dtsi b/arch/arm/boot/dts/integrator.dtsi new file mode 100644 index 0000000..813b91d --- /dev/null +++ b/arch/arm/boot/dts/integrator.dtsi @@ -0,0 +1,76 @@ +/* + * SoC core Device Tree for the ARM Integrator platforms + */ + +/include/ "skeleton.dtsi" + +/ { + timer@13000000 { + reg = <0x13000000 0x100>; + interrupt-parent = <&pic>; + interrupts = <5>; + }; + + timer@13000100 { + reg = <0x13000100 0x100>; + interrupt-parent = <&pic>; + interrupts = <6>; + }; + + timer@13000200 { + reg = <0x13000200 0x100>; + interrupt-parent = <&pic>; + interrupts = <7>; + }; + + pic@14000000 { + compatible = "arm,versatile-fpga-irq"; + #interrupt-cells = <1>; + interrupt-controller; + reg = <0x14000000 0x100>; + clear-mask = <0xffffffff>; + }; + + flash@24000000 { + compatible = "cfi-flash"; + reg = <0x24000000 0x02000000>; + }; + + fpga { + compatible = "arm,amba-bus", "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + interrupt-parent = <&pic>; + + /* + * These PrimeCells are in the same locations and using the + * same interrupts in all Integrators, however the silicon + * version deployed is different. + */ + rtc@15000000 { + reg = <0x15000000 0x1000>; + interrupts = <8>; + }; + + uart@16000000 { + reg = <0x16000000 0x1000>; + interrupts = <1>; + }; + + uart@17000000 { + reg = <0x17000000 0x1000>; + interrupts = <2>; + }; + + kmi@18000000 { + reg = <0x18000000 0x1000>; + interrupts = <3>; + }; + + kmi@19000000 { + reg = <0x19000000 0x1000>; + interrupts = <4>; + }; + }; +}; diff --git a/arch/arm/boot/dts/integratorap.dts b/arch/arm/boot/dts/integratorap.dts new file mode 100644 index 0000000..6176775 --- /dev/null +++ b/arch/arm/boot/dts/integratorap.dts @@ -0,0 +1,68 @@ +/* + * Device Tree for the ARM Integrator/AP platform + */ + +/dts-v1/; +/include/ "integrator.dtsi" + +/ { + model = "ARM Integrator/AP"; + compatible = "arm,integrator-ap"; + + aliases { + arm,timer-primary = &timer2; + arm,timer-secondary = &timer1; + }; + + chosen { + bootargs = "root=/dev/ram0 console=ttyAM0,38400n8 earlyprintk"; + }; + + timer0: timer@13000000 { + compatible = "arm,integrator-timer"; + }; + + timer1: timer@13000100 { + compatible = "arm,integrator-timer"; + }; + + timer2: timer@13000200 { + compatible = "arm,integrator-timer"; + }; + + pic: pic@14000000 { + valid-mask = <0x003fffff>; + }; + + fpga { + /* + * The Integator/AP predates the idea to have magic numbers + * identifying the PrimeCell in hardware, thus we have to + * supply these from the device tree. + */ + rtc: rtc@15000000 { + compatible = "arm,pl030", "arm,primecell"; + arm,primecell-periphid = <0x00041030>; + }; + + uart0: uart@16000000 { + compatible = "arm,pl010", "arm,primecell"; + arm,primecell-periphid = <0x00041010>; + }; + + uart1: uart@17000000 { + compatible = "arm,pl010", "arm,primecell"; + arm,primecell-periphid = <0x00041010>; + }; + + kmi0: kmi@18000000 { + compatible = "arm,pl050", "arm,primecell"; + arm,primecell-periphid = <0x00041050>; + }; + + kmi1: kmi@19000000 { + compatible = "arm,pl050", "arm,primecell"; + arm,primecell-periphid = <0x00041050>; + }; + }; +}; diff --git a/arch/arm/boot/dts/integratorcp.dts b/arch/arm/boot/dts/integratorcp.dts new file mode 100644 index 0000000..2dd5e4e --- /dev/null +++ b/arch/arm/boot/dts/integratorcp.dts @@ -0,0 +1,110 @@ +/* + * Device Tree for the ARM Integrator/CP platform + */ + +/dts-v1/; +/include/ "integrator.dtsi" + +/ { + model = "ARM Integrator/CP"; + compatible = "arm,integrator-cp"; + + aliases { + arm,timer-primary = &timer2; + arm,timer-secondary = &timer1; + }; + + chosen { + bootargs = "root=/dev/ram0 console=ttyAMA0,38400n8 earlyprintk"; + }; + + timer0: timer@13000000 { + compatible = "arm,sp804", "arm,primecell"; + }; + + timer1: timer@13000100 { + compatible = "arm,sp804", "arm,primecell"; + }; + + timer2: timer@13000200 { + compatible = "arm,sp804", "arm,primecell"; + }; + + pic: pic@14000000 { + valid-mask = <0x1fc003ff>; + }; + + cic: cic@10000040 { + compatible = "arm,versatile-fpga-irq"; + #interrupt-cells = <1>; + interrupt-controller; + reg = <0x10000040 0x100>; + clear-mask = <0xffffffff>; + valid-mask = <0x00000007>; + }; + + sic: sic@ca000000 { + compatible = "arm,versatile-fpga-irq"; + #interrupt-cells = <1>; + interrupt-controller; + reg = <0xca000000 0x100>; + clear-mask = <0x00000fff>; + valid-mask = <0x00000fff>; + }; + + ethernet@c8000000 { + compatible = "smsc,lan91c111"; + reg = <0xc8000000 0x10>; + interrupt-parent = <&pic>; + interrupts = <27>; + }; + + fpga { + /* + * These PrimeCells are at the same location and using + * the same interrupts in all Integrators, but in the CP + * slightly newer versions are deployed. + */ + rtc@15000000 { + compatible = "arm,pl031", "arm,primecell"; + }; + + uart@16000000 { + compatible = "arm,pl011", "arm,primecell"; + }; + + uart@17000000 { + compatible = "arm,pl011", "arm,primecell"; + }; + + kmi@18000000 { + compatible = "arm,pl050", "arm,primecell"; + }; + + kmi@19000000 { + compatible = "arm,pl050", "arm,primecell"; + }; + + /* + * These PrimeCells are only available on the Integrator/CP + */ + mmc@1c000000 { + compatible = "arm,pl180", "arm,primecell"; + reg = <0x1c000000 0x1000>; + interrupts = <23 24>; + max-frequency = <515633>; + }; + + aaci@1d000000 { + compatible = "arm,pl041", "arm,primecell"; + reg = <0x1d000000 0x1000>; + interrupts = <25>; + }; + + clcd@c0000000 { + compatible = "arm,pl110", "arm,primecell"; + reg = <0xC0000000 0x1000>; + interrupts = <22>; + }; + }; +}; diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts index e60dc71..f0ba901 100644 --- a/arch/arm/boot/dts/tegra20-seaboard.dts +++ b/arch/arm/boot/dts/tegra20-seaboard.dts @@ -539,7 +539,7 @@ nvidia,invert-interrupt; }; - memory-controller@0x7000f400 { + memory-controller@7000f400 { emc-table@190000 { reg = <190000>; compatible = "nvidia,tegra20-emc-table"; diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index 67a6cd9..f3a09d0 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -170,7 +170,7 @@ reg = <0x7000e400 0x400>; }; - memory-controller@0x7000f000 { + memory-controller@7000f000 { compatible = "nvidia,tegra20-mc"; reg = <0x7000f000 0x024 0x7000f03c 0x3c4>; @@ -183,7 +183,7 @@ 0x58000000 0x02000000>; /* GART aperture */ }; - memory-controller@0x7000f400 { + memory-controller@7000f400 { compatible = "nvidia,tegra20-emc"; reg = <0x7000f400 0x200>; #address-cells = <1>; diff --git a/arch/arm/common/it8152.c b/arch/arm/common/it8152.c index c4110d1..001f491 100644 --- a/arch/arm/common/it8152.c +++ b/arch/arm/common/it8152.c @@ -284,11 +284,17 @@ int dma_set_coherent_mask(struct device *dev, u64 mask) int __init it8152_pci_setup(int nr, struct pci_sys_data *sys) { - it8152_io.start = IT8152_IO_BASE + 0x12000; - it8152_io.end = IT8152_IO_BASE + 0x12000 + 0x100000; + /* + * FIXME: use pci_ioremap_io to remap the IO space here and + * move over to the generic io.h implementation. + * This requires solving the same problem for PXA PCMCIA + * support. + */ + it8152_io.start = (unsigned long)IT8152_IO_BASE + 0x12000; + it8152_io.end = (unsigned long)IT8152_IO_BASE + 0x12000 + 0x100000; sys->mem_offset = 0x10000000; - sys->io_offset = IT8152_IO_BASE; + sys->io_offset = (unsigned long)IT8152_IO_BASE; if (request_resource(&ioport_resource, &it8152_io)) { printk(KERN_ERR "PCI: unable to allocate IO region\n"); diff --git a/arch/arm/include/asm/Kbuild b/arch/arm/include/asm/Kbuild index 960abce..8a7196c 100644 --- a/arch/arm/include/asm/Kbuild +++ b/arch/arm/include/asm/Kbuild @@ -5,16 +5,33 @@ header-y += hwcap.h generic-y += auxvec.h generic-y += bitsperlong.h generic-y += cputime.h +generic-y += current.h generic-y += emergency-restart.h generic-y += errno.h +generic-y += exec.h generic-y += ioctl.h +generic-y += ipcbuf.h generic-y += irq_regs.h generic-y += kdebug.h generic-y += local.h generic-y += local64.h +generic-y += msgbuf.h +generic-y += param.h +generic-y += parport.h generic-y += percpu.h generic-y += poll.h generic-y += resource.h generic-y += sections.h +generic-y += segment.h +generic-y += sembuf.h +generic-y += serial.h +generic-y += shmbuf.h generic-y += siginfo.h generic-y += sizes.h +generic-y += socket.h +generic-y += sockios.h +generic-y += termbits.h +generic-y += termios.h +generic-y += timex.h +generic-y += types.h +generic-y += unaligned.h diff --git a/arch/arm/include/asm/arch_timer.h b/arch/arm/include/asm/arch_timer.h index 62e7547..d40229d 100644 --- a/arch/arm/include/asm/arch_timer.h +++ b/arch/arm/include/asm/arch_timer.h @@ -2,11 +2,12 @@ #define __ASMARM_ARCH_TIMER_H #include <asm/errno.h> +#include <linux/clocksource.h> #ifdef CONFIG_ARM_ARCH_TIMER -#define ARCH_HAS_READ_CURRENT_TIMER int arch_timer_of_register(void); int arch_timer_sched_clock_init(void); +struct timecounter *arch_timer_get_timecounter(void); #else static inline int arch_timer_of_register(void) { @@ -17,6 +18,11 @@ static inline int arch_timer_sched_clock_init(void) { return -ENXIO; } + +static inline struct timecounter *arch_timer_get_timecounter(void) +{ + return NULL; +} #endif #endif diff --git a/arch/arm/include/asm/current.h b/arch/arm/include/asm/current.h deleted file mode 100644 index 75d21e2..0000000 --- a/arch/arm/include/asm/current.h +++ /dev/null @@ -1,15 +0,0 @@ -#ifndef _ASMARM_CURRENT_H -#define _ASMARM_CURRENT_H - -#include <linux/thread_info.h> - -static inline struct task_struct *get_current(void) __attribute_const__; - -static inline struct task_struct *get_current(void) -{ - return current_thread_info()->task; -} - -#define current (get_current()) - -#endif /* _ASMARM_CURRENT_H */ diff --git a/arch/arm/include/asm/delay.h b/arch/arm/include/asm/delay.h index dc61451..ab98fdd 100644 --- a/arch/arm/include/asm/delay.h +++ b/arch/arm/include/asm/delay.h @@ -15,6 +15,11 @@ #ifndef __ASSEMBLY__ +struct delay_timer { + unsigned long (*read_current_timer)(void); + unsigned long freq; +}; + extern struct arm_delay_ops { void (*delay)(unsigned long); void (*const_udelay)(unsigned long); @@ -56,6 +61,10 @@ extern void __loop_delay(unsigned long loops); extern void __loop_udelay(unsigned long usecs); extern void __loop_const_udelay(unsigned long); +/* Delay-loop timer registration. */ +#define ARCH_HAS_READ_CURRENT_TIMER +extern void register_current_timer_delay(const struct delay_timer *timer); + #endif /* __ASSEMBLY__ */ #endif /* defined(_ARM_DELAY_H) */ diff --git a/arch/arm/include/asm/exec.h b/arch/arm/include/asm/exec.h deleted file mode 100644 index 7c4fbef..0000000 --- a/arch/arm/include/asm/exec.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ASM_ARM_EXEC_H -#define __ASM_ARM_EXEC_H - -#define arch_align_stack(x) (x) - -#endif /* __ASM_ARM_EXEC_H */ diff --git a/arch/arm/include/asm/glue-cache.h b/arch/arm/include/asm/glue-cache.h index 7e30874..4f8d2c0 100644 --- a/arch/arm/include/asm/glue-cache.h +++ b/arch/arm/include/asm/glue-cache.h @@ -110,19 +110,19 @@ #endif #if defined(CONFIG_CPU_V6) || defined(CONFIG_CPU_V6K) -//# ifdef _CACHE +# ifdef _CACHE # define MULTI_CACHE 1 -//# else -//# define _CACHE v6 -//# endif +# else +# define _CACHE v6 +# endif #endif #if defined(CONFIG_CPU_V7) -//# ifdef _CACHE +# ifdef _CACHE # define MULTI_CACHE 1 -//# else -//# define _CACHE v7 -//# endif +# else +# define _CACHE v7 +# endif #endif #if !defined(_CACHE) && !defined(MULTI_CACHE) diff --git a/arch/arm/include/asm/hardirq.h b/arch/arm/include/asm/hardirq.h index 436e60b..2740c2a 100644 --- a/arch/arm/include/asm/hardirq.h +++ b/arch/arm/include/asm/hardirq.h @@ -5,7 +5,7 @@ #include <linux/threads.h> #include <asm/irq.h> -#define NR_IPI 5 +#define NR_IPI 6 typedef struct { unsigned int __softirq_pending; diff --git a/arch/arm/include/asm/hardware/linkup-l1110.h b/arch/arm/include/asm/hardware/linkup-l1110.h deleted file mode 100644 index 7ec9116..0000000 --- a/arch/arm/include/asm/hardware/linkup-l1110.h +++ /dev/null @@ -1,48 +0,0 @@ -/* -* -* Definitions for H3600 Handheld Computer -* -* Copyright 2001 Compaq Computer Corporation. -* -* Use consistent with the GNU GPL is permitted, -* provided that this copyright notice is -* preserved in its entirety in all copies and derived works. -* -* COMPAQ COMPUTER CORPORATION MAKES NO WARRANTIES, EXPRESSED OR IMPLIED, -* AS TO THE USEFULNESS OR CORRECTNESS OF THIS CODE OR ITS -* FITNESS FOR ANY PARTICULAR PURPOSE. -* -* Author: Jamey Hicks. -* -*/ - -/* LinkUp Systems PCCard/CompactFlash Interface for SA-1100 */ - -/* PC Card Status Register */ -#define LINKUP_PRS_S1 (1 << 0) /* voltage control bits S1-S4 */ -#define LINKUP_PRS_S2 (1 << 1) -#define LINKUP_PRS_S3 (1 << 2) -#define LINKUP_PRS_S4 (1 << 3) -#define LINKUP_PRS_BVD1 (1 << 4) -#define LINKUP_PRS_BVD2 (1 << 5) -#define LINKUP_PRS_VS1 (1 << 6) -#define LINKUP_PRS_VS2 (1 << 7) -#define LINKUP_PRS_RDY (1 << 8) -#define LINKUP_PRS_CD1 (1 << 9) -#define LINKUP_PRS_CD2 (1 << 10) - -/* PC Card Command Register */ -#define LINKUP_PRC_S1 (1 << 0) -#define LINKUP_PRC_S2 (1 << 1) -#define LINKUP_PRC_S3 (1 << 2) -#define LINKUP_PRC_S4 (1 << 3) -#define LINKUP_PRC_RESET (1 << 4) -#define LINKUP_PRC_APOE (1 << 5) /* Auto Power Off Enable: clears S1-S4 when either nCD goes high */ -#define LINKUP_PRC_CFE (1 << 6) /* CompactFlash mode Enable: addresses A[10:0] only, A[25:11] high */ -#define LINKUP_PRC_SOE (1 << 7) /* signal output driver enable */ -#define LINKUP_PRC_SSP (1 << 8) /* sock select polarity: 0 for socket 0, 1 for socket 1 */ -#define LINKUP_PRC_MBZ (1 << 15) /* must be zero */ - -struct linkup_l1110 { - volatile short prc; -}; diff --git a/arch/arm/include/asm/io.h b/arch/arm/include/asm/io.h index 8f4db67..35c1ed8 100644 --- a/arch/arm/include/asm/io.h +++ b/arch/arm/include/asm/io.h @@ -47,13 +47,68 @@ extern void __raw_readsb(const void __iomem *addr, void *data, int bytelen); extern void __raw_readsw(const void __iomem *addr, void *data, int wordlen); extern void __raw_readsl(const void __iomem *addr, void *data, int longlen); -#define __raw_writeb(v,a) ((void)(__chk_io_ptr(a), *(volatile unsigned char __force *)(a) = (v))) -#define __raw_writew(v,a) ((void)(__chk_io_ptr(a), *(volatile unsigned short __force *)(a) = (v))) -#define __raw_writel(v,a) ((void)(__chk_io_ptr(a), *(volatile unsigned int __force *)(a) = (v))) +#if __LINUX_ARM_ARCH__ < 6 +/* + * Half-word accesses are problematic with RiscPC due to limitations of + * the bus. Rather than special-case the machine, just let the compiler + * generate the access for CPUs prior to ARMv6. + */ +#define __raw_readw(a) (__chk_io_ptr(a), *(volatile unsigned short __force *)(a)) +#define __raw_writew(v,a) ((void)(__chk_io_ptr(a), *(volatile unsigned short __force *)(a) = (v))) +#else +/* + * When running under a hypervisor, we want to avoid I/O accesses with + * writeback addressing modes as these incur a significant performance + * overhead (the address generation must be emulated in software). + */ +static inline void __raw_writew(u16 val, volatile void __iomem *addr) +{ + asm volatile("strh %1, %0" + : "+Qo" (*(volatile u16 __force *)addr) + : "r" (val)); +} + +static inline u16 __raw_readw(const volatile void __iomem *addr) +{ + u16 val; + asm volatile("ldrh %1, %0" + : "+Qo" (*(volatile u16 __force *)addr), + "=r" (val)); + return val; +} +#endif -#define __raw_readb(a) (__chk_io_ptr(a), *(volatile unsigned char __force *)(a)) -#define __raw_readw(a) (__chk_io_ptr(a), *(volatile unsigned short __force *)(a)) -#define __raw_readl(a) (__chk_io_ptr(a), *(volatile unsigned int __force *)(a)) +static inline void __raw_writeb(u8 val, volatile void __iomem *addr) +{ + asm volatile("strb %1, %0" + : "+Qo" (*(volatile u8 __force *)addr) + : "r" (val)); +} + +static inline void __raw_writel(u32 val, volatile void __iomem *addr) +{ + asm volatile("str %1, %0" + : "+Qo" (*(volatile u32 __force *)addr) + : "r" (val)); +} + +static inline u8 __raw_readb(const volatile void __iomem *addr) +{ + u8 val; + asm volatile("ldrb %1, %0" + : "+Qo" (*(volatile u8 __force *)addr), + "=r" (val)); + return val; +} + +static inline u32 __raw_readl(const volatile void __iomem *addr) +{ + u32 val; + asm volatile("ldr %1, %0" + : "+Qo" (*(volatile u32 __force *)addr), + "=r" (val)); + return val; +} /* * Architecture ioremap implementation. diff --git a/arch/arm/include/asm/ipcbuf.h b/arch/arm/include/asm/ipcbuf.h deleted file mode 100644 index 84c7e51..0000000 --- a/arch/arm/include/asm/ipcbuf.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/ipcbuf.h> diff --git a/arch/arm/include/asm/msgbuf.h b/arch/arm/include/asm/msgbuf.h deleted file mode 100644 index 33b35b9..0000000 --- a/arch/arm/include/asm/msgbuf.h +++ /dev/null @@ -1,31 +0,0 @@ -#ifndef _ASMARM_MSGBUF_H -#define _ASMARM_MSGBUF_H - -/* - * The msqid64_ds structure for arm architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - */ - -struct msqid64_ds { - struct ipc64_perm msg_perm; - __kernel_time_t msg_stime; /* last msgsnd time */ - unsigned long __unused1; - __kernel_time_t msg_rtime; /* last msgrcv time */ - unsigned long __unused2; - __kernel_time_t msg_ctime; /* last change time */ - unsigned long __unused3; - unsigned long msg_cbytes; /* current number of bytes on queue */ - unsigned long msg_qnum; /* number of messages in queue */ - unsigned long msg_qbytes; /* max number of bytes on queue */ - __kernel_pid_t msg_lspid; /* pid of last msgsnd */ - __kernel_pid_t msg_lrpid; /* last receive pid */ - unsigned long __unused4; - unsigned long __unused5; -}; - -#endif /* _ASMARM_MSGBUF_H */ diff --git a/arch/arm/include/asm/mutex.h b/arch/arm/include/asm/mutex.h index b1479fd..87c0449 100644 --- a/arch/arm/include/asm/mutex.h +++ b/arch/arm/include/asm/mutex.h @@ -9,8 +9,13 @@ #define _ASM_MUTEX_H /* * On pre-ARMv6 hardware this results in a swp-based implementation, - * which is the most efficient. For ARMv6+, we emit a pair of exclusive - * accesses instead. + * which is the most efficient. For ARMv6+, we have exclusive memory + * accessors and use atomic_dec to avoid the extra xchg operations + * on the locking slowpaths. */ +#if __LINUX_ARM_ARCH__ < 6 #include <asm-generic/mutex-xchg.h> +#else +#include <asm-generic/mutex-dec.h> #endif +#endif /* _ASM_MUTEX_H */ diff --git a/arch/arm/include/asm/opcodes-virt.h b/arch/arm/include/asm/opcodes-virt.h new file mode 100644 index 0000000..b85665a --- /dev/null +++ b/arch/arm/include/asm/opcodes-virt.h @@ -0,0 +1,29 @@ +/* + * opcodes-virt.h: Opcode definitions for the ARM virtualization extensions + * Copyright (C) 2012 Linaro Limited + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ +#ifndef __ASM_ARM_OPCODES_VIRT_H +#define __ASM_ARM_OPCODES_VIRT_H + +#include <asm/opcodes.h> + +#define __HVC(imm16) __inst_arm_thumb32( \ + 0xE1400070 | (((imm16) & 0xFFF0) << 4) | ((imm16) & 0x000F), \ + 0xF7E08000 | (((imm16) & 0xF000) << 4) | ((imm16) & 0x0FFF) \ +) + +#endif /* ! __ASM_ARM_OPCODES_VIRT_H */ diff --git a/arch/arm/include/asm/opcodes.h b/arch/arm/include/asm/opcodes.h index 19c48de..74e211a 100644 --- a/arch/arm/include/asm/opcodes.h +++ b/arch/arm/include/asm/opcodes.h @@ -19,6 +19,33 @@ extern asmlinkage unsigned int arm_check_condition(u32 opcode, u32 psr); /* + * Assembler opcode byteswap helpers. + * These are only intended for use by this header: don't use them directly, + * because they will be suboptimal in most cases. + */ +#define ___asm_opcode_swab32(x) ( \ + (((x) << 24) & 0xFF000000) \ + | (((x) << 8) & 0x00FF0000) \ + | (((x) >> 8) & 0x0000FF00) \ + | (((x) >> 24) & 0x000000FF) \ +) +#define ___asm_opcode_swab16(x) ( \ + (((x) << 8) & 0xFF00) \ + | (((x) >> 8) & 0x00FF) \ +) +#define ___asm_opcode_swahb32(x) ( \ + (((x) << 8) & 0xFF00FF00) \ + | (((x) >> 8) & 0x00FF00FF) \ +) +#define ___asm_opcode_swahw32(x) ( \ + (((x) << 16) & 0xFFFF0000) \ + | (((x) >> 16) & 0x0000FFFF) \ +) +#define ___asm_opcode_identity32(x) ((x) & 0xFFFFFFFF) +#define ___asm_opcode_identity16(x) ((x) & 0xFFFF) + + +/* * Opcode byteswap helpers * * These macros help with converting instructions between a canonical integer @@ -41,39 +68,163 @@ extern asmlinkage unsigned int arm_check_condition(u32 opcode, u32 psr); * Note that values in the range 0x0000E800..0xE7FFFFFF intentionally do not * represent any valid Thumb-2 instruction. For this range, * __opcode_is_thumb32() and __opcode_is_thumb16() will both be false. + * + * The ___asm variants are intended only for use by this header, in situations + * involving inline assembler. For .S files, the normal __opcode_*() macros + * should do the right thing. */ +#ifdef __ASSEMBLY__ -#ifndef __ASSEMBLY__ +#define ___opcode_swab32(x) ___asm_opcode_swab32(x) +#define ___opcode_swab16(x) ___asm_opcode_swab16(x) +#define ___opcode_swahb32(x) ___asm_opcode_swahb32(x) +#define ___opcode_swahw32(x) ___asm_opcode_swahw32(x) +#define ___opcode_identity32(x) ___asm_opcode_identity32(x) +#define ___opcode_identity16(x) ___asm_opcode_identity16(x) + +#else /* ! __ASSEMBLY__ */ #include <linux/types.h> #include <linux/swab.h> +#define ___opcode_swab32(x) swab32(x) +#define ___opcode_swab16(x) swab16(x) +#define ___opcode_swahb32(x) swahb32(x) +#define ___opcode_swahw32(x) swahw32(x) +#define ___opcode_identity32(x) ((u32)(x)) +#define ___opcode_identity16(x) ((u16)(x)) + +#endif /* ! __ASSEMBLY__ */ + + #ifdef CONFIG_CPU_ENDIAN_BE8 -#define __opcode_to_mem_arm(x) swab32(x) -#define __opcode_to_mem_thumb16(x) swab16(x) -#define __opcode_to_mem_thumb32(x) swahb32(x) -#else -#define __opcode_to_mem_arm(x) ((u32)(x)) -#define __opcode_to_mem_thumb16(x) ((u16)(x)) -#define __opcode_to_mem_thumb32(x) swahw32(x) + +#define __opcode_to_mem_arm(x) ___opcode_swab32(x) +#define __opcode_to_mem_thumb16(x) ___opcode_swab16(x) +#define __opcode_to_mem_thumb32(x) ___opcode_swahb32(x) +#define ___asm_opcode_to_mem_arm(x) ___asm_opcode_swab32(x) +#define ___asm_opcode_to_mem_thumb16(x) ___asm_opcode_swab16(x) +#define ___asm_opcode_to_mem_thumb32(x) ___asm_opcode_swahb32(x) + +#else /* ! CONFIG_CPU_ENDIAN_BE8 */ + +#define __opcode_to_mem_arm(x) ___opcode_identity32(x) +#define __opcode_to_mem_thumb16(x) ___opcode_identity16(x) +#define ___asm_opcode_to_mem_arm(x) ___asm_opcode_identity32(x) +#define ___asm_opcode_to_mem_thumb16(x) ___asm_opcode_identity16(x) +#ifndef CONFIG_CPU_ENDIAN_BE32 +/* + * On BE32 systems, using 32-bit accesses to store Thumb instructions will not + * work in all cases, due to alignment constraints. For now, a correct + * version is not provided for BE32. + */ +#define __opcode_to_mem_thumb32(x) ___opcode_swahw32(x) +#define ___asm_opcode_to_mem_thumb32(x) ___asm_opcode_swahw32(x) #endif +#endif /* ! CONFIG_CPU_ENDIAN_BE8 */ + #define __mem_to_opcode_arm(x) __opcode_to_mem_arm(x) #define __mem_to_opcode_thumb16(x) __opcode_to_mem_thumb16(x) +#ifndef CONFIG_CPU_ENDIAN_BE32 #define __mem_to_opcode_thumb32(x) __opcode_to_mem_thumb32(x) +#endif /* Operations specific to Thumb opcodes */ /* Instruction size checks: */ -#define __opcode_is_thumb32(x) ((u32)(x) >= 0xE8000000UL) -#define __opcode_is_thumb16(x) ((u32)(x) < 0xE800UL) +#define __opcode_is_thumb32(x) ( \ + ((x) & 0xF8000000) == 0xE8000000 \ + || ((x) & 0xF0000000) == 0xF0000000 \ +) +#define __opcode_is_thumb16(x) ( \ + ((x) & 0xFFFF0000) == 0 \ + && !(((x) & 0xF800) == 0xE800 || ((x) & 0xF000) == 0xF000) \ +) /* Operations to construct or split 32-bit Thumb instructions: */ -#define __opcode_thumb32_first(x) ((u16)((x) >> 16)) -#define __opcode_thumb32_second(x) ((u16)(x)) -#define __opcode_thumb32_compose(first, second) \ - (((u32)(u16)(first) << 16) | (u32)(u16)(second)) +#define __opcode_thumb32_first(x) (___opcode_identity16((x) >> 16)) +#define __opcode_thumb32_second(x) (___opcode_identity16(x)) +#define __opcode_thumb32_compose(first, second) ( \ + (___opcode_identity32(___opcode_identity16(first)) << 16) \ + | ___opcode_identity32(___opcode_identity16(second)) \ +) +#define ___asm_opcode_thumb32_first(x) (___asm_opcode_identity16((x) >> 16)) +#define ___asm_opcode_thumb32_second(x) (___asm_opcode_identity16(x)) +#define ___asm_opcode_thumb32_compose(first, second) ( \ + (___asm_opcode_identity32(___asm_opcode_identity16(first)) << 16) \ + | ___asm_opcode_identity32(___asm_opcode_identity16(second)) \ +) -#endif /* __ASSEMBLY__ */ +/* + * Opcode injection helpers + * + * In rare cases it is necessary to assemble an opcode which the + * assembler does not support directly, or which would normally be + * rejected because of the CFLAGS or AFLAGS used to build the affected + * file. + * + * Before using these macros, consider carefully whether it is feasible + * instead to change the build flags for your file, or whether it really + * makes sense to support old assembler versions when building that + * particular kernel feature. + * + * The macros defined here should only be used where there is no viable + * alternative. + * + * + * __inst_arm(x): emit the specified ARM opcode + * __inst_thumb16(x): emit the specified 16-bit Thumb opcode + * __inst_thumb32(x): emit the specified 32-bit Thumb opcode + * + * __inst_arm_thumb16(arm, thumb): emit either the specified arm or + * 16-bit Thumb opcode, depending on whether an ARM or Thumb-2 + * kernel is being built + * + * __inst_arm_thumb32(arm, thumb): emit either the specified arm or + * 32-bit Thumb opcode, depending on whether an ARM or Thumb-2 + * kernel is being built + * + * + * Note that using these macros directly is poor practice. Instead, you + * should use them to define human-readable wrapper macros to encode the + * instructions that you care about. In code which might run on ARMv7 or + * above, you can usually use the __inst_arm_thumb{16,32} macros to + * specify the ARM and Thumb alternatives at the same time. This ensures + * that the correct opcode gets emitted depending on the instruction set + * used for the kernel build. + * + * Look at opcodes-virt.h for an example of how to use these macros. + */ +#include <linux/stringify.h> + +#define __inst_arm(x) ___inst_arm(___asm_opcode_to_mem_arm(x)) +#define __inst_thumb32(x) ___inst_thumb32( \ + ___asm_opcode_to_mem_thumb16(___asm_opcode_thumb32_first(x)), \ + ___asm_opcode_to_mem_thumb16(___asm_opcode_thumb32_second(x)) \ +) +#define __inst_thumb16(x) ___inst_thumb16(___asm_opcode_to_mem_thumb16(x)) + +#ifdef CONFIG_THUMB2_KERNEL +#define __inst_arm_thumb16(arm_opcode, thumb_opcode) \ + __inst_thumb16(thumb_opcode) +#define __inst_arm_thumb32(arm_opcode, thumb_opcode) \ + __inst_thumb32(thumb_opcode) +#else +#define __inst_arm_thumb16(arm_opcode, thumb_opcode) __inst_arm(arm_opcode) +#define __inst_arm_thumb32(arm_opcode, thumb_opcode) __inst_arm(arm_opcode) +#endif + +/* Helpers for the helpers. Don't use these directly. */ +#ifdef __ASSEMBLY__ +#define ___inst_arm(x) .long x +#define ___inst_thumb16(x) .short x +#define ___inst_thumb32(first, second) .short first, second +#else +#define ___inst_arm(x) ".long " __stringify(x) "\n\t" +#define ___inst_thumb16(x) ".short " __stringify(x) "\n\t" +#define ___inst_thumb32(first, second) \ + ".short " __stringify(first) ", " __stringify(second) "\n\t" +#endif #endif /* __ASM_ARM_OPCODES_H */ diff --git a/arch/arm/include/asm/param.h b/arch/arm/include/asm/param.h deleted file mode 100644 index 8b24bf94..0000000 --- a/arch/arm/include/asm/param.h +++ /dev/null @@ -1,31 +0,0 @@ -/* - * arch/arm/include/asm/param.h - * - * Copyright (C) 1995-1999 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ -#ifndef __ASM_PARAM_H -#define __ASM_PARAM_H - -#ifdef __KERNEL__ -# define HZ CONFIG_HZ /* Internal kernel timer frequency */ -# define USER_HZ 100 /* User interfaces are in "ticks" */ -# define CLOCKS_PER_SEC (USER_HZ) /* like times() */ -#else -# define HZ 100 -#endif - -#define EXEC_PAGESIZE 4096 - -#ifndef NOGROUP -#define NOGROUP (-1) -#endif - -/* max length of hostname */ -#define MAXHOSTNAMELEN 64 - -#endif - diff --git a/arch/arm/include/asm/parport.h b/arch/arm/include/asm/parport.h deleted file mode 100644 index 26e94b0..0000000 --- a/arch/arm/include/asm/parport.h +++ /dev/null @@ -1,18 +0,0 @@ -/* - * arch/arm/include/asm/parport.h: ARM-specific parport initialisation - * - * Copyright (C) 1999, 2000 Tim Waugh <tim@cyberelk.demon.co.uk> - * - * This file should only be included by drivers/parport/parport_pc.c. - */ - -#ifndef __ASMARM_PARPORT_H -#define __ASMARM_PARPORT_H - -static int __devinit parport_pc_find_isa_ports (int autoirq, int autodma); -static int __devinit parport_pc_find_nonpci_ports (int autoirq, int autodma) -{ - return parport_pc_find_isa_ports (autoirq, autodma); -} - -#endif /* !(_ASMARM_PARPORT_H) */ diff --git a/arch/arm/include/asm/segment.h b/arch/arm/include/asm/segment.h deleted file mode 100644 index 9e24c21..0000000 --- a/arch/arm/include/asm/segment.h +++ /dev/null @@ -1,11 +0,0 @@ -#ifndef __ASM_ARM_SEGMENT_H -#define __ASM_ARM_SEGMENT_H - -#define __KERNEL_CS 0x0 -#define __KERNEL_DS 0x0 - -#define __USER_CS 0x1 -#define __USER_DS 0x1 - -#endif /* __ASM_ARM_SEGMENT_H */ - diff --git a/arch/arm/include/asm/sembuf.h b/arch/arm/include/asm/sembuf.h deleted file mode 100644 index 1c02839..0000000 --- a/arch/arm/include/asm/sembuf.h +++ /dev/null @@ -1,25 +0,0 @@ -#ifndef _ASMARM_SEMBUF_H -#define _ASMARM_SEMBUF_H - -/* - * The semid64_ds structure for arm architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - */ - -struct semid64_ds { - struct ipc64_perm sem_perm; /* permissions .. see ipc.h */ - __kernel_time_t sem_otime; /* last semop time */ - unsigned long __unused1; - __kernel_time_t sem_ctime; /* last change time */ - unsigned long __unused2; - unsigned long sem_nsems; /* no. of semaphores in array */ - unsigned long __unused3; - unsigned long __unused4; -}; - -#endif /* _ASMARM_SEMBUF_H */ diff --git a/arch/arm/include/asm/serial.h b/arch/arm/include/asm/serial.h deleted file mode 100644 index ebb0490..0000000 --- a/arch/arm/include/asm/serial.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * arch/arm/include/asm/serial.h - * - * Copyright (C) 1996 Russell King. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * Changelog: - * 15-10-1996 RMK Created - */ - -#ifndef __ASM_SERIAL_H -#define __ASM_SERIAL_H - -#define BASE_BAUD (1843200 / 16) - -#endif diff --git a/arch/arm/include/asm/shmbuf.h b/arch/arm/include/asm/shmbuf.h deleted file mode 100644 index 2e5c67b..0000000 --- a/arch/arm/include/asm/shmbuf.h +++ /dev/null @@ -1,42 +0,0 @@ -#ifndef _ASMARM_SHMBUF_H -#define _ASMARM_SHMBUF_H - -/* - * The shmid64_ds structure for arm architecture. - * Note extra padding because this structure is passed back and forth - * between kernel and user space. - * - * Pad space is left for: - * - 64-bit time_t to solve y2038 problem - * - 2 miscellaneous 32-bit values - */ - -struct shmid64_ds { - struct ipc64_perm shm_perm; /* operation perms */ - size_t shm_segsz; /* size of segment (bytes) */ - __kernel_time_t shm_atime; /* last attach time */ - unsigned long __unused1; - __kernel_time_t shm_dtime; /* last detach time */ - unsigned long __unused2; - __kernel_time_t shm_ctime; /* last change time */ - unsigned long __unused3; - __kernel_pid_t shm_cpid; /* pid of creator */ - __kernel_pid_t shm_lpid; /* pid of last operator */ - unsigned long shm_nattch; /* no. of current attaches */ - unsigned long __unused4; - unsigned long __unused5; -}; - -struct shminfo64 { - unsigned long shmmax; - unsigned long shmmin; - unsigned long shmmni; - unsigned long shmseg; - unsigned long shmall; - unsigned long __unused1; - unsigned long __unused2; - unsigned long __unused3; - unsigned long __unused4; -}; - -#endif /* _ASMARM_SHMBUF_H */ diff --git a/arch/arm/include/asm/socket.h b/arch/arm/include/asm/socket.h deleted file mode 100644 index 6433cad..0000000 --- a/arch/arm/include/asm/socket.h +++ /dev/null @@ -1,72 +0,0 @@ -#ifndef _ASMARM_SOCKET_H -#define _ASMARM_SOCKET_H - -#include <asm/sockios.h> - -/* For setsockopt(2) */ -#define SOL_SOCKET 1 - -#define SO_DEBUG 1 -#define SO_REUSEADDR 2 -#define SO_TYPE 3 -#define SO_ERROR 4 -#define SO_DONTROUTE 5 -#define SO_BROADCAST 6 -#define SO_SNDBUF 7 -#define SO_RCVBUF 8 -#define SO_SNDBUFFORCE 32 -#define SO_RCVBUFFORCE 33 -#define SO_KEEPALIVE 9 -#define SO_OOBINLINE 10 -#define SO_NO_CHECK 11 -#define SO_PRIORITY 12 -#define SO_LINGER 13 -#define SO_BSDCOMPAT 14 -/* To add :#define SO_REUSEPORT 15 */ -#define SO_PASSCRED 16 -#define SO_PEERCRED 17 -#define SO_RCVLOWAT 18 -#define SO_SNDLOWAT 19 -#define SO_RCVTIMEO 20 -#define SO_SNDTIMEO 21 - -/* Security levels - as per NRL IPv6 - don't actually do anything */ -#define SO_SECURITY_AUTHENTICATION 22 -#define SO_SECURITY_ENCRYPTION_TRANSPORT 23 -#define SO_SECURITY_ENCRYPTION_NETWORK 24 - -#define SO_BINDTODEVICE 25 - -/* Socket filtering */ -#define SO_ATTACH_FILTER 26 -#define SO_DETACH_FILTER 27 - -#define SO_PEERNAME 28 -#define SO_TIMESTAMP 29 -#define SCM_TIMESTAMP SO_TIMESTAMP - -#define SO_ACCEPTCONN 30 - -#define SO_PEERSEC 31 -#define SO_PASSSEC 34 -#define SO_TIMESTAMPNS 35 -#define SCM_TIMESTAMPNS SO_TIMESTAMPNS - -#define SO_MARK 36 - -#define SO_TIMESTAMPING 37 -#define SCM_TIMESTAMPING SO_TIMESTAMPING - -#define SO_PROTOCOL 38 -#define SO_DOMAIN 39 - -#define SO_RXQ_OVFL 40 - -#define SO_WIFI_STATUS 41 -#define SCM_WIFI_STATUS SO_WIFI_STATUS -#define SO_PEEK_OFF 42 - -/* Instruct lower device to use last 4-bytes of skb data as FCS */ -#define SO_NOFCS 43 - -#endif /* _ASM_SOCKET_H */ diff --git a/arch/arm/include/asm/sockios.h b/arch/arm/include/asm/sockios.h deleted file mode 100644 index a2588a2..0000000 --- a/arch/arm/include/asm/sockios.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifndef __ARCH_ARM_SOCKIOS_H -#define __ARCH_ARM_SOCKIOS_H - -/* Socket-level I/O control calls. */ -#define FIOSETOWN 0x8901 -#define SIOCSPGRP 0x8902 -#define FIOGETOWN 0x8903 -#define SIOCGPGRP 0x8904 -#define SIOCATMARK 0x8905 -#define SIOCGSTAMP 0x8906 /* Get stamp (timeval) */ -#define SIOCGSTAMPNS 0x8907 /* Get stamp (timespec) */ - -#endif diff --git a/arch/arm/include/asm/syscall.h b/arch/arm/include/asm/syscall.h index c334a23..9fdded6 100644 --- a/arch/arm/include/asm/syscall.h +++ b/arch/arm/include/asm/syscall.h @@ -8,6 +8,11 @@ #define _ASM_ARM_SYSCALL_H #include <linux/err.h> +#include <linux/sched.h> + +#include <asm/unistd.h> + +#define NR_syscalls (__NR_syscalls) extern const unsigned long sys_call_table[]; diff --git a/arch/arm/include/asm/termbits.h b/arch/arm/include/asm/termbits.h deleted file mode 100644 index 704135d..0000000 --- a/arch/arm/include/asm/termbits.h +++ /dev/null @@ -1,198 +0,0 @@ -#ifndef __ASM_ARM_TERMBITS_H -#define __ASM_ARM_TERMBITS_H - -typedef unsigned char cc_t; -typedef unsigned int speed_t; -typedef unsigned int tcflag_t; - -#define NCCS 19 -struct termios { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ -}; - -struct termios2 { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ - speed_t c_ispeed; /* input speed */ - speed_t c_ospeed; /* output speed */ -}; - -struct ktermios { - tcflag_t c_iflag; /* input mode flags */ - tcflag_t c_oflag; /* output mode flags */ - tcflag_t c_cflag; /* control mode flags */ - tcflag_t c_lflag; /* local mode flags */ - cc_t c_line; /* line discipline */ - cc_t c_cc[NCCS]; /* control characters */ - speed_t c_ispeed; /* input speed */ - speed_t c_ospeed; /* output speed */ -}; - - -/* c_cc characters */ -#define VINTR 0 -#define VQUIT 1 -#define VERASE 2 -#define VKILL 3 -#define VEOF 4 -#define VTIME 5 -#define VMIN 6 -#define VSWTC 7 -#define VSTART 8 -#define VSTOP 9 -#define VSUSP 10 -#define VEOL 11 -#define VREPRINT 12 -#define VDISCARD 13 -#define VWERASE 14 -#define VLNEXT 15 -#define VEOL2 16 - -/* c_iflag bits */ -#define IGNBRK 0000001 -#define BRKINT 0000002 -#define IGNPAR 0000004 -#define PARMRK 0000010 -#define INPCK 0000020 -#define ISTRIP 0000040 -#define INLCR 0000100 -#define IGNCR 0000200 -#define ICRNL 0000400 -#define IUCLC 0001000 -#define IXON 0002000 -#define IXANY 0004000 -#define IXOFF 0010000 -#define IMAXBEL 0020000 -#define IUTF8 0040000 - -/* c_oflag bits */ -#define OPOST 0000001 -#define OLCUC 0000002 -#define ONLCR 0000004 -#define OCRNL 0000010 -#define ONOCR 0000020 -#define ONLRET 0000040 -#define OFILL 0000100 -#define OFDEL 0000200 -#define NLDLY 0000400 -#define NL0 0000000 -#define NL1 0000400 -#define CRDLY 0003000 -#define CR0 0000000 -#define CR1 0001000 -#define CR2 0002000 -#define CR3 0003000 -#define TABDLY 0014000 -#define TAB0 0000000 -#define TAB1 0004000 -#define TAB2 0010000 -#define TAB3 0014000 -#define XTABS 0014000 -#define BSDLY 0020000 -#define BS0 0000000 -#define BS1 0020000 -#define VTDLY 0040000 -#define VT0 0000000 -#define VT1 0040000 -#define FFDLY 0100000 -#define FF0 0000000 -#define FF1 0100000 - -/* c_cflag bit meaning */ -#define CBAUD 0010017 -#define B0 0000000 /* hang up */ -#define B50 0000001 -#define B75 0000002 -#define B110 0000003 -#define B134 0000004 -#define B150 0000005 -#define B200 0000006 -#define B300 0000007 -#define B600 0000010 -#define B1200 0000011 -#define B1800 0000012 -#define B2400 0000013 -#define B4800 0000014 -#define B9600 0000015 -#define B19200 0000016 -#define B38400 0000017 -#define EXTA B19200 -#define EXTB B38400 -#define CSIZE 0000060 -#define CS5 0000000 -#define CS6 0000020 -#define CS7 0000040 -#define CS8 0000060 -#define CSTOPB 0000100 -#define CREAD 0000200 -#define PARENB 0000400 -#define PARODD 0001000 -#define HUPCL 0002000 -#define CLOCAL 0004000 -#define CBAUDEX 0010000 -#define BOTHER 0010000 -#define B57600 0010001 -#define B115200 0010002 -#define B230400 0010003 -#define B460800 0010004 -#define B500000 0010005 -#define B576000 0010006 -#define B921600 0010007 -#define B1000000 0010010 -#define B1152000 0010011 -#define B1500000 0010012 -#define B2000000 0010013 -#define B2500000 0010014 -#define B3000000 0010015 -#define B3500000 0010016 -#define B4000000 0010017 -#define CIBAUD 002003600000 /* input baud rate */ -#define CMSPAR 010000000000 /* mark or space (stick) parity */ -#define CRTSCTS 020000000000 /* flow control */ - -#define IBSHIFT 16 - -/* c_lflag bits */ -#define ISIG 0000001 -#define ICANON 0000002 -#define XCASE 0000004 -#define ECHO 0000010 -#define ECHOE 0000020 -#define ECHOK 0000040 -#define ECHONL 0000100 -#define NOFLSH 0000200 -#define TOSTOP 0000400 -#define ECHOCTL 0001000 -#define ECHOPRT 0002000 -#define ECHOKE 0004000 -#define FLUSHO 0010000 -#define PENDIN 0040000 -#define IEXTEN 0100000 -#define EXTPROC 0200000 - -/* tcflow() and TCXONC use these */ -#define TCOOFF 0 -#define TCOON 1 -#define TCIOFF 2 -#define TCION 3 - -/* tcflush() and TCFLSH use these */ -#define TCIFLUSH 0 -#define TCOFLUSH 1 -#define TCIOFLUSH 2 - -/* tcsetattr uses these */ -#define TCSANOW 0 -#define TCSADRAIN 1 -#define TCSAFLUSH 2 - -#endif /* __ASM_ARM_TERMBITS_H */ diff --git a/arch/arm/include/asm/termios.h b/arch/arm/include/asm/termios.h deleted file mode 100644 index 293e3f1..0000000 --- a/arch/arm/include/asm/termios.h +++ /dev/null @@ -1,92 +0,0 @@ -#ifndef __ASM_ARM_TERMIOS_H -#define __ASM_ARM_TERMIOS_H - -#include <asm/termbits.h> -#include <asm/ioctls.h> - -struct winsize { - unsigned short ws_row; - unsigned short ws_col; - unsigned short ws_xpixel; - unsigned short ws_ypixel; -}; - -#define NCC 8 -struct termio { - unsigned short c_iflag; /* input mode flags */ - unsigned short c_oflag; /* output mode flags */ - unsigned short c_cflag; /* control mode flags */ - unsigned short c_lflag; /* local mode flags */ - unsigned char c_line; /* line discipline */ - unsigned char c_cc[NCC]; /* control characters */ -}; - -#ifdef __KERNEL__ -/* intr=^C quit=^| erase=del kill=^U - eof=^D vtime=\0 vmin=\1 sxtc=\0 - start=^Q stop=^S susp=^Z eol=\0 - reprint=^R discard=^U werase=^W lnext=^V - eol2=\0 -*/ -#define INIT_C_CC "\003\034\177\025\004\0\1\0\021\023\032\0\022\017\027\026\0" -#endif - -/* modem lines */ -#define TIOCM_LE 0x001 -#define TIOCM_DTR 0x002 -#define TIOCM_RTS 0x004 -#define TIOCM_ST 0x008 -#define TIOCM_SR 0x010 -#define TIOCM_CTS 0x020 -#define TIOCM_CAR 0x040 -#define TIOCM_RNG 0x080 -#define TIOCM_DSR 0x100 -#define TIOCM_CD TIOCM_CAR -#define TIOCM_RI TIOCM_RNG -#define TIOCM_OUT1 0x2000 -#define TIOCM_OUT2 0x4000 -#define TIOCM_LOOP 0x8000 - -/* ioctl (fd, TIOCSERGETLSR, &result) where result may be as below */ - -#ifdef __KERNEL__ - -/* - * Translate a "termio" structure into a "termios". Ugh. - */ -#define SET_LOW_TERMIOS_BITS(termios, termio, x) { \ - unsigned short __tmp; \ - get_user(__tmp,&(termio)->x); \ - *(unsigned short *) &(termios)->x = __tmp; \ -} - -#define user_termio_to_kernel_termios(termios, termio) \ -({ \ - SET_LOW_TERMIOS_BITS(termios, termio, c_iflag); \ - SET_LOW_TERMIOS_BITS(termios, termio, c_oflag); \ - SET_LOW_TERMIOS_BITS(termios, termio, c_cflag); \ - SET_LOW_TERMIOS_BITS(termios, termio, c_lflag); \ - copy_from_user((termios)->c_cc, (termio)->c_cc, NCC); \ -}) - -/* - * Translate a "termios" structure into a "termio". Ugh. - */ -#define kernel_termios_to_user_termio(termio, termios) \ -({ \ - put_user((termios)->c_iflag, &(termio)->c_iflag); \ - put_user((termios)->c_oflag, &(termio)->c_oflag); \ - put_user((termios)->c_cflag, &(termio)->c_cflag); \ - put_user((termios)->c_lflag, &(termio)->c_lflag); \ - put_user((termios)->c_line, &(termio)->c_line); \ - copy_to_user((termio)->c_cc, (termios)->c_cc, NCC); \ -}) - -#define user_termios_to_kernel_termios(k, u) copy_from_user(k, u, sizeof(struct termios2)) -#define kernel_termios_to_user_termios(u, k) copy_to_user(u, k, sizeof(struct termios2)) -#define user_termios_to_kernel_termios_1(k, u) copy_from_user(k, u, sizeof(struct termios)) -#define kernel_termios_to_user_termios_1(u, k) copy_to_user(u, k, sizeof(struct termios)) - -#endif /* __KERNEL__ */ - -#endif /* __ASM_ARM_TERMIOS_H */ diff --git a/arch/arm/include/asm/thread_info.h b/arch/arm/include/asm/thread_info.h index af7b0bd..f71cdab 100644 --- a/arch/arm/include/asm/thread_info.h +++ b/arch/arm/include/asm/thread_info.h @@ -59,7 +59,9 @@ struct thread_info { __u32 syscall; /* syscall number */ __u8 used_cp[16]; /* thread used copro */ unsigned long tp_value; +#ifdef CONFIG_CRUNCH struct crunch_state crunchstate; +#endif union fp_state fpstate __attribute__((aligned(8))); union vfp_state vfpstate; #ifdef CONFIG_ARM_THUMBEE @@ -148,6 +150,7 @@ extern int vfp_restore_user_hwstate(struct user_vfp __user *, #define TIF_NOTIFY_RESUME 2 /* callback before returning to user */ #define TIF_SYSCALL_TRACE 8 #define TIF_SYSCALL_AUDIT 9 +#define TIF_SYSCALL_TRACEPOINT 10 #define TIF_POLLING_NRFLAG 16 #define TIF_USING_IWMMXT 17 #define TIF_MEMDIE 18 /* is terminating due to OOM killer */ @@ -160,12 +163,13 @@ extern int vfp_restore_user_hwstate(struct user_vfp __user *, #define _TIF_NOTIFY_RESUME (1 << TIF_NOTIFY_RESUME) #define _TIF_SYSCALL_TRACE (1 << TIF_SYSCALL_TRACE) #define _TIF_SYSCALL_AUDIT (1 << TIF_SYSCALL_AUDIT) +#define _TIF_SYSCALL_TRACEPOINT (1 << TIF_SYSCALL_TRACEPOINT) #define _TIF_POLLING_NRFLAG (1 << TIF_POLLING_NRFLAG) #define _TIF_USING_IWMMXT (1 << TIF_USING_IWMMXT) #define _TIF_SECCOMP (1 << TIF_SECCOMP) /* Checks for any syscall work in entry-common.S */ -#define _TIF_SYSCALL_WORK (_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT) +#define _TIF_SYSCALL_WORK (_TIF_SYSCALL_TRACE | _TIF_SYSCALL_AUDIT | _TIF_SYSCALL_TRACEPOINT) /* * Change these and you break ASM code in entry-common.S diff --git a/arch/arm/include/asm/timex.h b/arch/arm/include/asm/timex.h index 963342a..83f2aa8 100644 --- a/arch/arm/include/asm/timex.h +++ b/arch/arm/include/asm/timex.h @@ -12,7 +12,6 @@ #ifndef _ASMARM_TIMEX_H #define _ASMARM_TIMEX_H -#include <asm/arch_timer.h> #ifdef CONFIG_ARCH_MULTIPLATFORM #define CLOCK_TICK_RATE 1000000 #else @@ -20,11 +19,6 @@ #endif typedef unsigned long cycles_t; - -#ifdef ARCH_HAS_READ_CURRENT_TIMER #define get_cycles() ({ cycles_t c; read_current_timer(&c) ? 0 : c; }) -#else -#define get_cycles() (0) -#endif #endif diff --git a/arch/arm/include/asm/types.h b/arch/arm/include/asm/types.h deleted file mode 100644 index 28beab9..0000000 --- a/arch/arm/include/asm/types.h +++ /dev/null @@ -1,16 +0,0 @@ -#ifndef __ASM_ARM_TYPES_H -#define __ASM_ARM_TYPES_H - -#include <asm-generic/int-ll64.h> - -/* - * These aren't exported outside the kernel to avoid name space clashes - */ -#ifdef __KERNEL__ - -#define BITS_PER_LONG 32 - -#endif /* __KERNEL__ */ - -#endif - diff --git a/arch/arm/include/asm/unaligned.h b/arch/arm/include/asm/unaligned.h deleted file mode 100644 index 44593a8..0000000 --- a/arch/arm/include/asm/unaligned.h +++ /dev/null @@ -1,19 +0,0 @@ -#ifndef _ASM_ARM_UNALIGNED_H -#define _ASM_ARM_UNALIGNED_H - -#include <linux/unaligned/le_byteshift.h> -#include <linux/unaligned/be_byteshift.h> -#include <linux/unaligned/generic.h> - -/* - * Select endianness - */ -#ifndef __ARMEB__ -#define get_unaligned __get_unaligned_le -#define put_unaligned __put_unaligned_le -#else -#define get_unaligned __get_unaligned_be -#define put_unaligned __put_unaligned_be -#endif - -#endif /* _ASM_ARM_UNALIGNED_H */ diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h index 2fde5fd..d9ff5cc 100644 --- a/arch/arm/include/asm/unistd.h +++ b/arch/arm/include/asm/unistd.h @@ -407,6 +407,14 @@ /* 378 for kcmp */ /* + * This may need to be greater than __NR_last_syscall+1 in order to + * account for the padding in the syscall table + */ +#ifdef __KERNEL__ +#define __NR_syscalls (380) +#endif /* __KERNEL__ */ + +/* * The following SWIs are ARM private. */ #define __ARM_NR_BASE (__NR_SYSCALL_BASE+0x0f0000) diff --git a/arch/arm/kernel/Makefile b/arch/arm/kernel/Makefile index d81f3a6d..5dfef9d 100644 --- a/arch/arm/kernel/Makefile +++ b/arch/arm/kernel/Makefile @@ -19,7 +19,9 @@ obj-y := elf.o entry-armv.o entry-common.o irq.o opcodes.o \ process.o ptrace.o return_address.o sched_clock.o \ setup.o signal.o stacktrace.o sys_arm.o time.o traps.o -obj-$(CONFIG_DEPRECATED_PARAM_STRUCT) += compat.o +obj-$(CONFIG_ATAGS) += atags_parse.o +obj-$(CONFIG_ATAGS_PROC) += atags_proc.o +obj-$(CONFIG_DEPRECATED_PARAM_STRUCT) += atags_compat.o obj-$(CONFIG_OC_ETM) += etm.o obj-$(CONFIG_CPU_IDLE) += cpuidle.o @@ -51,7 +53,6 @@ test-kprobes-objs += kprobes-test-thumb.o else test-kprobes-objs += kprobes-test-arm.o endif -obj-$(CONFIG_ATAGS_PROC) += atags.o obj-$(CONFIG_OABI_COMPAT) += sys_oabi-compat.o obj-$(CONFIG_ARM_THUMBEE) += thumbee.o obj-$(CONFIG_KGDB) += kgdb.o diff --git a/arch/arm/kernel/arch_timer.c b/arch/arm/kernel/arch_timer.c index cf25880..c8ef207 100644 --- a/arch/arm/kernel/arch_timer.c +++ b/arch/arm/kernel/arch_timer.c @@ -21,18 +21,28 @@ #include <linux/io.h> #include <asm/cputype.h> +#include <asm/delay.h> #include <asm/localtimer.h> #include <asm/arch_timer.h> #include <asm/system_info.h> #include <asm/sched_clock.h> static unsigned long arch_timer_rate; -static int arch_timer_ppi; -static int arch_timer_ppi2; + +enum ppi_nr { + PHYS_SECURE_PPI, + PHYS_NONSECURE_PPI, + VIRT_PPI, + HYP_PPI, + MAX_TIMER_PPI +}; + +static int arch_timer_ppi[MAX_TIMER_PPI]; static struct clock_event_device __percpu **arch_timer_evt; +static struct delay_timer arch_delay_timer; -extern void init_current_timer_delay(unsigned long freq); +static bool arch_timer_use_virtual = true; /* * Architected system timer support. @@ -46,50 +56,104 @@ extern void init_current_timer_delay(unsigned long freq); #define ARCH_TIMER_REG_FREQ 1 #define ARCH_TIMER_REG_TVAL 2 -static void arch_timer_reg_write(int reg, u32 val) +#define ARCH_TIMER_PHYS_ACCESS 0 +#define ARCH_TIMER_VIRT_ACCESS 1 + +/* + * These register accessors are marked inline so the compiler can + * nicely work out which register we want, and chuck away the rest of + * the code. At least it does so with a recent GCC (4.6.3). + */ +static inline void arch_timer_reg_write(const int access, const int reg, u32 val) { - switch (reg) { - case ARCH_TIMER_REG_CTRL: - asm volatile("mcr p15, 0, %0, c14, c2, 1" : : "r" (val)); - break; - case ARCH_TIMER_REG_TVAL: - asm volatile("mcr p15, 0, %0, c14, c2, 0" : : "r" (val)); - break; + if (access == ARCH_TIMER_PHYS_ACCESS) { + switch (reg) { + case ARCH_TIMER_REG_CTRL: + asm volatile("mcr p15, 0, %0, c14, c2, 1" : : "r" (val)); + break; + case ARCH_TIMER_REG_TVAL: + asm volatile("mcr p15, 0, %0, c14, c2, 0" : : "r" (val)); + break; + } + } + + if (access == ARCH_TIMER_VIRT_ACCESS) { + switch (reg) { + case ARCH_TIMER_REG_CTRL: + asm volatile("mcr p15, 0, %0, c14, c3, 1" : : "r" (val)); + break; + case ARCH_TIMER_REG_TVAL: + asm volatile("mcr p15, 0, %0, c14, c3, 0" : : "r" (val)); + break; + } } isb(); } -static u32 arch_timer_reg_read(int reg) +static inline u32 arch_timer_reg_read(const int access, const int reg) { - u32 val; + u32 val = 0; + + if (access == ARCH_TIMER_PHYS_ACCESS) { + switch (reg) { + case ARCH_TIMER_REG_CTRL: + asm volatile("mrc p15, 0, %0, c14, c2, 1" : "=r" (val)); + break; + case ARCH_TIMER_REG_TVAL: + asm volatile("mrc p15, 0, %0, c14, c2, 0" : "=r" (val)); + break; + case ARCH_TIMER_REG_FREQ: + asm volatile("mrc p15, 0, %0, c14, c0, 0" : "=r" (val)); + break; + } + } - switch (reg) { - case ARCH_TIMER_REG_CTRL: - asm volatile("mrc p15, 0, %0, c14, c2, 1" : "=r" (val)); - break; - case ARCH_TIMER_REG_FREQ: - asm volatile("mrc p15, 0, %0, c14, c0, 0" : "=r" (val)); - break; - case ARCH_TIMER_REG_TVAL: - asm volatile("mrc p15, 0, %0, c14, c2, 0" : "=r" (val)); - break; - default: - BUG(); + if (access == ARCH_TIMER_VIRT_ACCESS) { + switch (reg) { + case ARCH_TIMER_REG_CTRL: + asm volatile("mrc p15, 0, %0, c14, c3, 1" : "=r" (val)); + break; + case ARCH_TIMER_REG_TVAL: + asm volatile("mrc p15, 0, %0, c14, c3, 0" : "=r" (val)); + break; + } } return val; } -static irqreturn_t arch_timer_handler(int irq, void *dev_id) +static inline cycle_t arch_timer_counter_read(const int access) { - struct clock_event_device *evt = *(struct clock_event_device **)dev_id; - unsigned long ctrl; + cycle_t cval = 0; + + if (access == ARCH_TIMER_PHYS_ACCESS) + asm volatile("mrrc p15, 0, %Q0, %R0, c14" : "=r" (cval)); + + if (access == ARCH_TIMER_VIRT_ACCESS) + asm volatile("mrrc p15, 1, %Q0, %R0, c14" : "=r" (cval)); + + return cval; +} + +static inline cycle_t arch_counter_get_cntpct(void) +{ + return arch_timer_counter_read(ARCH_TIMER_PHYS_ACCESS); +} - ctrl = arch_timer_reg_read(ARCH_TIMER_REG_CTRL); +static inline cycle_t arch_counter_get_cntvct(void) +{ + return arch_timer_counter_read(ARCH_TIMER_VIRT_ACCESS); +} + +static irqreturn_t inline timer_handler(const int access, + struct clock_event_device *evt) +{ + unsigned long ctrl; + ctrl = arch_timer_reg_read(access, ARCH_TIMER_REG_CTRL); if (ctrl & ARCH_TIMER_CTRL_IT_STAT) { ctrl |= ARCH_TIMER_CTRL_IT_MASK; - arch_timer_reg_write(ARCH_TIMER_REG_CTRL, ctrl); + arch_timer_reg_write(access, ARCH_TIMER_REG_CTRL, ctrl); evt->event_handler(evt); return IRQ_HANDLED; } @@ -97,63 +161,100 @@ static irqreturn_t arch_timer_handler(int irq, void *dev_id) return IRQ_NONE; } -static void arch_timer_disable(void) +static irqreturn_t arch_timer_handler_virt(int irq, void *dev_id) { - unsigned long ctrl; + struct clock_event_device *evt = *(struct clock_event_device **)dev_id; - ctrl = arch_timer_reg_read(ARCH_TIMER_REG_CTRL); - ctrl &= ~ARCH_TIMER_CTRL_ENABLE; - arch_timer_reg_write(ARCH_TIMER_REG_CTRL, ctrl); + return timer_handler(ARCH_TIMER_VIRT_ACCESS, evt); } -static void arch_timer_set_mode(enum clock_event_mode mode, - struct clock_event_device *clk) +static irqreturn_t arch_timer_handler_phys(int irq, void *dev_id) { + struct clock_event_device *evt = *(struct clock_event_device **)dev_id; + + return timer_handler(ARCH_TIMER_PHYS_ACCESS, evt); +} + +static inline void timer_set_mode(const int access, int mode) +{ + unsigned long ctrl; switch (mode) { case CLOCK_EVT_MODE_UNUSED: case CLOCK_EVT_MODE_SHUTDOWN: - arch_timer_disable(); + ctrl = arch_timer_reg_read(access, ARCH_TIMER_REG_CTRL); + ctrl &= ~ARCH_TIMER_CTRL_ENABLE; + arch_timer_reg_write(access, ARCH_TIMER_REG_CTRL, ctrl); break; default: break; } } -static int arch_timer_set_next_event(unsigned long evt, - struct clock_event_device *unused) +static void arch_timer_set_mode_virt(enum clock_event_mode mode, + struct clock_event_device *clk) { - unsigned long ctrl; + timer_set_mode(ARCH_TIMER_VIRT_ACCESS, mode); +} - ctrl = arch_timer_reg_read(ARCH_TIMER_REG_CTRL); +static void arch_timer_set_mode_phys(enum clock_event_mode mode, + struct clock_event_device *clk) +{ + timer_set_mode(ARCH_TIMER_PHYS_ACCESS, mode); +} + +static inline void set_next_event(const int access, unsigned long evt) +{ + unsigned long ctrl; + ctrl = arch_timer_reg_read(access, ARCH_TIMER_REG_CTRL); ctrl |= ARCH_TIMER_CTRL_ENABLE; ctrl &= ~ARCH_TIMER_CTRL_IT_MASK; + arch_timer_reg_write(access, ARCH_TIMER_REG_TVAL, evt); + arch_timer_reg_write(access, ARCH_TIMER_REG_CTRL, ctrl); +} - arch_timer_reg_write(ARCH_TIMER_REG_TVAL, evt); - arch_timer_reg_write(ARCH_TIMER_REG_CTRL, ctrl); +static int arch_timer_set_next_event_virt(unsigned long evt, + struct clock_event_device *unused) +{ + set_next_event(ARCH_TIMER_VIRT_ACCESS, evt); + return 0; +} +static int arch_timer_set_next_event_phys(unsigned long evt, + struct clock_event_device *unused) +{ + set_next_event(ARCH_TIMER_PHYS_ACCESS, evt); return 0; } static int __cpuinit arch_timer_setup(struct clock_event_device *clk) { - /* Be safe... */ - arch_timer_disable(); - clk->features = CLOCK_EVT_FEAT_ONESHOT | CLOCK_EVT_FEAT_C3STOP; clk->name = "arch_sys_timer"; clk->rating = 450; - clk->set_mode = arch_timer_set_mode; - clk->set_next_event = arch_timer_set_next_event; - clk->irq = arch_timer_ppi; + if (arch_timer_use_virtual) { + clk->irq = arch_timer_ppi[VIRT_PPI]; + clk->set_mode = arch_timer_set_mode_virt; + clk->set_next_event = arch_timer_set_next_event_virt; + } else { + clk->irq = arch_timer_ppi[PHYS_SECURE_PPI]; + clk->set_mode = arch_timer_set_mode_phys; + clk->set_next_event = arch_timer_set_next_event_phys; + } + + clk->set_mode(CLOCK_EVT_MODE_SHUTDOWN, NULL); clockevents_config_and_register(clk, arch_timer_rate, 0xf, 0x7fffffff); *__this_cpu_ptr(arch_timer_evt) = clk; - enable_percpu_irq(clk->irq, 0); - if (arch_timer_ppi2) - enable_percpu_irq(arch_timer_ppi2, 0); + if (arch_timer_use_virtual) + enable_percpu_irq(arch_timer_ppi[VIRT_PPI], 0); + else { + enable_percpu_irq(arch_timer_ppi[PHYS_SECURE_PPI], 0); + if (arch_timer_ppi[PHYS_NONSECURE_PPI]) + enable_percpu_irq(arch_timer_ppi[PHYS_NONSECURE_PPI], 0); + } return 0; } @@ -173,8 +274,8 @@ static int arch_timer_available(void) return -ENXIO; if (arch_timer_rate == 0) { - arch_timer_reg_write(ARCH_TIMER_REG_CTRL, 0); - freq = arch_timer_reg_read(ARCH_TIMER_REG_FREQ); + freq = arch_timer_reg_read(ARCH_TIMER_PHYS_ACCESS, + ARCH_TIMER_REG_FREQ); /* Check the timer frequency. */ if (freq == 0) { @@ -185,52 +286,57 @@ static int arch_timer_available(void) arch_timer_rate = freq; } - pr_info_once("Architected local timer running at %lu.%02luMHz.\n", - arch_timer_rate / 1000000, (arch_timer_rate / 10000) % 100); + pr_info_once("Architected local timer running at %lu.%02luMHz (%s).\n", + arch_timer_rate / 1000000, (arch_timer_rate / 10000) % 100, + arch_timer_use_virtual ? "virt" : "phys"); return 0; } -static inline cycle_t arch_counter_get_cntpct(void) +static u32 notrace arch_counter_get_cntpct32(void) { - u32 cvall, cvalh; - - asm volatile("mrrc p15, 0, %0, %1, c14" : "=r" (cvall), "=r" (cvalh)); + cycle_t cnt = arch_counter_get_cntpct(); - return ((cycle_t) cvalh << 32) | cvall; -} - -static inline cycle_t arch_counter_get_cntvct(void) -{ - u32 cvall, cvalh; - - asm volatile("mrrc p15, 1, %0, %1, c14" : "=r" (cvall), "=r" (cvalh)); - - return ((cycle_t) cvalh << 32) | cvall; + /* + * The sched_clock infrastructure only knows about counters + * with at most 32bits. Forget about the upper 24 bits for the + * time being... + */ + return (u32)cnt; } static u32 notrace arch_counter_get_cntvct32(void) { - cycle_t cntvct = arch_counter_get_cntvct(); + cycle_t cnt = arch_counter_get_cntvct(); /* * The sched_clock infrastructure only knows about counters * with at most 32bits. Forget about the upper 24 bits for the * time being... */ - return (u32)(cntvct & (u32)~0); + return (u32)cnt; } static cycle_t arch_counter_read(struct clocksource *cs) { + /* + * Always use the physical counter for the clocksource. + * CNTHCTL.PL1PCTEN must be set to 1. + */ return arch_counter_get_cntpct(); } -int read_current_timer(unsigned long *timer_val) +static unsigned long arch_timer_read_current_timer(void) { - if (!arch_timer_rate) - return -ENXIO; - *timer_val = arch_counter_get_cntpct(); - return 0; + return arch_counter_get_cntpct(); +} + +static cycle_t arch_counter_read_cc(const struct cyclecounter *cc) +{ + /* + * Always use the physical counter for the clocksource. + * CNTHCTL.PL1PCTEN must be set to 1. + */ + return arch_counter_get_cntpct(); } static struct clocksource clocksource_counter = { @@ -241,14 +347,32 @@ static struct clocksource clocksource_counter = { .flags = CLOCK_SOURCE_IS_CONTINUOUS, }; +static struct cyclecounter cyclecounter = { + .read = arch_counter_read_cc, + .mask = CLOCKSOURCE_MASK(56), +}; + +static struct timecounter timecounter; + +struct timecounter *arch_timer_get_timecounter(void) +{ + return &timecounter; +} + static void __cpuinit arch_timer_stop(struct clock_event_device *clk) { pr_debug("arch_timer_teardown disable IRQ%d cpu #%d\n", clk->irq, smp_processor_id()); - disable_percpu_irq(clk->irq); - if (arch_timer_ppi2) - disable_percpu_irq(arch_timer_ppi2); - arch_timer_set_mode(CLOCK_EVT_MODE_UNUSED, clk); + + if (arch_timer_use_virtual) + disable_percpu_irq(arch_timer_ppi[VIRT_PPI]); + else { + disable_percpu_irq(arch_timer_ppi[PHYS_SECURE_PPI]); + if (arch_timer_ppi[PHYS_NONSECURE_PPI]) + disable_percpu_irq(arch_timer_ppi[PHYS_NONSECURE_PPI]); + } + + clk->set_mode(CLOCK_EVT_MODE_UNUSED, clk); } static struct local_timer_ops arch_timer_ops __cpuinitdata = { @@ -261,36 +385,48 @@ static struct clock_event_device arch_timer_global_evt; static int __init arch_timer_register(void) { int err; + int ppi; err = arch_timer_available(); if (err) - return err; + goto out; arch_timer_evt = alloc_percpu(struct clock_event_device *); - if (!arch_timer_evt) - return -ENOMEM; + if (!arch_timer_evt) { + err = -ENOMEM; + goto out; + } clocksource_register_hz(&clocksource_counter, arch_timer_rate); + cyclecounter.mult = clocksource_counter.mult; + cyclecounter.shift = clocksource_counter.shift; + timecounter_init(&timecounter, &cyclecounter, + arch_counter_get_cntpct()); + + if (arch_timer_use_virtual) { + ppi = arch_timer_ppi[VIRT_PPI]; + err = request_percpu_irq(ppi, arch_timer_handler_virt, + "arch_timer", arch_timer_evt); + } else { + ppi = arch_timer_ppi[PHYS_SECURE_PPI]; + err = request_percpu_irq(ppi, arch_timer_handler_phys, + "arch_timer", arch_timer_evt); + if (!err && arch_timer_ppi[PHYS_NONSECURE_PPI]) { + ppi = arch_timer_ppi[PHYS_NONSECURE_PPI]; + err = request_percpu_irq(ppi, arch_timer_handler_phys, + "arch_timer", arch_timer_evt); + if (err) + free_percpu_irq(arch_timer_ppi[PHYS_SECURE_PPI], + arch_timer_evt); + } + } - err = request_percpu_irq(arch_timer_ppi, arch_timer_handler, - "arch_timer", arch_timer_evt); if (err) { pr_err("arch_timer: can't register interrupt %d (%d)\n", - arch_timer_ppi, err); + ppi, err); goto out_free; } - if (arch_timer_ppi2) { - err = request_percpu_irq(arch_timer_ppi2, arch_timer_handler, - "arch_timer", arch_timer_evt); - if (err) { - pr_err("arch_timer: can't register interrupt %d (%d)\n", - arch_timer_ppi2, err); - arch_timer_ppi2 = 0; - goto out_free_irq; - } - } - err = local_timer_register(&arch_timer_ops); if (err) { /* @@ -302,21 +438,29 @@ static int __init arch_timer_register(void) arch_timer_global_evt.cpumask = cpumask_of(0); err = arch_timer_setup(&arch_timer_global_evt); } - if (err) goto out_free_irq; - init_current_timer_delay(arch_timer_rate); + /* Use the architected timer for the delay loop. */ + arch_delay_timer.read_current_timer = &arch_timer_read_current_timer; + arch_delay_timer.freq = arch_timer_rate; + register_current_timer_delay(&arch_delay_timer); return 0; out_free_irq: - free_percpu_irq(arch_timer_ppi, arch_timer_evt); - if (arch_timer_ppi2) - free_percpu_irq(arch_timer_ppi2, arch_timer_evt); + if (arch_timer_use_virtual) + free_percpu_irq(arch_timer_ppi[VIRT_PPI], arch_timer_evt); + else { + free_percpu_irq(arch_timer_ppi[PHYS_SECURE_PPI], + arch_timer_evt); + if (arch_timer_ppi[PHYS_NONSECURE_PPI]) + free_percpu_irq(arch_timer_ppi[PHYS_NONSECURE_PPI], + arch_timer_evt); + } out_free: free_percpu(arch_timer_evt); - +out: return err; } @@ -329,6 +473,7 @@ int __init arch_timer_of_register(void) { struct device_node *np; u32 freq; + int i; np = of_find_matching_node(NULL, arch_timer_of_match); if (!np) { @@ -340,22 +485,40 @@ int __init arch_timer_of_register(void) if (!of_property_read_u32(np, "clock-frequency", &freq)) arch_timer_rate = freq; - arch_timer_ppi = irq_of_parse_and_map(np, 0); - arch_timer_ppi2 = irq_of_parse_and_map(np, 1); - pr_info("arch_timer: found %s irqs %d %d\n", - np->name, arch_timer_ppi, arch_timer_ppi2); + for (i = PHYS_SECURE_PPI; i < MAX_TIMER_PPI; i++) + arch_timer_ppi[i] = irq_of_parse_and_map(np, i); + + /* + * If no interrupt provided for virtual timer, we'll have to + * stick to the physical timer. It'd better be accessible... + */ + if (!arch_timer_ppi[VIRT_PPI]) { + arch_timer_use_virtual = false; + + if (!arch_timer_ppi[PHYS_SECURE_PPI] || + !arch_timer_ppi[PHYS_NONSECURE_PPI]) { + pr_warn("arch_timer: No interrupt available, giving up\n"); + return -EINVAL; + } + } return arch_timer_register(); } int __init arch_timer_sched_clock_init(void) { + u32 (*cnt32)(void); int err; err = arch_timer_available(); if (err) return err; - setup_sched_clock(arch_counter_get_cntvct32, 32, arch_timer_rate); + if (arch_timer_use_virtual) + cnt32 = arch_counter_get_cntvct32; + else + cnt32 = arch_counter_get_cntpct32; + + setup_sched_clock(cnt32, 32, arch_timer_rate); return 0; } diff --git a/arch/arm/kernel/asm-offsets.c b/arch/arm/kernel/asm-offsets.c index 1429d89..c985b48 100644 --- a/arch/arm/kernel/asm-offsets.c +++ b/arch/arm/kernel/asm-offsets.c @@ -59,10 +59,12 @@ int main(void) DEFINE(TI_USED_CP, offsetof(struct thread_info, used_cp)); DEFINE(TI_TP_VALUE, offsetof(struct thread_info, tp_value)); DEFINE(TI_FPSTATE, offsetof(struct thread_info, fpstate)); +#ifdef CONFIG_VFP DEFINE(TI_VFPSTATE, offsetof(struct thread_info, vfpstate)); #ifdef CONFIG_SMP DEFINE(VFP_CPU, offsetof(union vfp_state, hard.cpu)); #endif +#endif #ifdef CONFIG_ARM_THUMBEE DEFINE(TI_THUMBEE_STATE, offsetof(struct thread_info, thumbee_state)); #endif diff --git a/arch/arm/kernel/atags.h b/arch/arm/kernel/atags.h index e5f028d..9edc969 100644 --- a/arch/arm/kernel/atags.h +++ b/arch/arm/kernel/atags.h @@ -3,3 +3,17 @@ extern void save_atags(struct tag *tags); #else static inline void save_atags(struct tag *tags) { } #endif + +void convert_to_tag_list(struct tag *tags); + +#ifdef CONFIG_ATAGS +struct machine_desc *setup_machine_tags(phys_addr_t __atags_pointer, unsigned int machine_nr); +#else +static inline struct machine_desc * +setup_machine_tags(phys_addr_t __atags_pointer, unsigned int machine_nr) +{ + early_print("no ATAGS support: can't continue\n"); + while (true); + unreachable(); +} +#endif diff --git a/arch/arm/kernel/compat.c b/arch/arm/kernel/atags_compat.c index 9256523..5236ad3 100644 --- a/arch/arm/kernel/compat.c +++ b/arch/arm/kernel/atags_compat.c @@ -1,5 +1,5 @@ /* - * linux/arch/arm/kernel/compat.c + * linux/arch/arm/kernel/atags_compat.c * * Copyright (C) 2001 Russell King * @@ -26,7 +26,7 @@ #include <asm/mach/arch.h> -#include "compat.h" +#include "atags.h" /* * Usage: diff --git a/arch/arm/kernel/atags_parse.c b/arch/arm/kernel/atags_parse.c new file mode 100644 index 0000000..14512e6 --- /dev/null +++ b/arch/arm/kernel/atags_parse.c @@ -0,0 +1,238 @@ +/* + * Tag parsing. + * + * Copyright (C) 1995-2001 Russell King + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* + * This is the traditional way of passing data to the kernel at boot time. Rather + * than passing a fixed inflexible structure to the kernel, we pass a list + * of variable-sized tags to the kernel. The first tag must be a ATAG_CORE + * tag for the list to be recognised (to distinguish the tagged list from + * a param_struct). The list is terminated with a zero-length tag (this tag + * is not parsed in any way). + */ + +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/fs.h> +#include <linux/root_dev.h> +#include <linux/screen_info.h> + +#include <asm/setup.h> +#include <asm/system_info.h> +#include <asm/page.h> +#include <asm/mach/arch.h> + +#include "atags.h" + +static char default_command_line[COMMAND_LINE_SIZE] __initdata = CONFIG_CMDLINE; + +#ifndef MEM_SIZE +#define MEM_SIZE (16*1024*1024) +#endif + +static struct { + struct tag_header hdr1; + struct tag_core core; + struct tag_header hdr2; + struct tag_mem32 mem; + struct tag_header hdr3; +} default_tags __initdata = { + { tag_size(tag_core), ATAG_CORE }, + { 1, PAGE_SIZE, 0xff }, + { tag_size(tag_mem32), ATAG_MEM }, + { MEM_SIZE }, + { 0, ATAG_NONE } +}; + +static int __init parse_tag_core(const struct tag *tag) +{ + if (tag->hdr.size > 2) { + if ((tag->u.core.flags & 1) == 0) + root_mountflags &= ~MS_RDONLY; + ROOT_DEV = old_decode_dev(tag->u.core.rootdev); + } + return 0; +} + +__tagtable(ATAG_CORE, parse_tag_core); + +static int __init parse_tag_mem32(const struct tag *tag) +{ + return arm_add_memory(tag->u.mem.start, tag->u.mem.size); +} + +__tagtable(ATAG_MEM, parse_tag_mem32); + +#if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_DUMMY_CONSOLE) +static int __init parse_tag_videotext(const struct tag *tag) +{ + screen_info.orig_x = tag->u.videotext.x; + screen_info.orig_y = tag->u.videotext.y; + screen_info.orig_video_page = tag->u.videotext.video_page; + screen_info.orig_video_mode = tag->u.videotext.video_mode; + screen_info.orig_video_cols = tag->u.videotext.video_cols; + screen_info.orig_video_ega_bx = tag->u.videotext.video_ega_bx; + screen_info.orig_video_lines = tag->u.videotext.video_lines; + screen_info.orig_video_isVGA = tag->u.videotext.video_isvga; + screen_info.orig_video_points = tag->u.videotext.video_points; + return 0; +} + +__tagtable(ATAG_VIDEOTEXT, parse_tag_videotext); +#endif + +#ifdef CONFIG_BLK_DEV_RAM +static int __init parse_tag_ramdisk(const struct tag *tag) +{ + extern int rd_size, rd_image_start, rd_prompt, rd_doload; + + rd_image_start = tag->u.ramdisk.start; + rd_doload = (tag->u.ramdisk.flags & 1) == 0; + rd_prompt = (tag->u.ramdisk.flags & 2) == 0; + + if (tag->u.ramdisk.size) + rd_size = tag->u.ramdisk.size; + + return 0; +} + +__tagtable(ATAG_RAMDISK, parse_tag_ramdisk); +#endif + +static int __init parse_tag_serialnr(const struct tag *tag) +{ + system_serial_low = tag->u.serialnr.low; + system_serial_high = tag->u.serialnr.high; + return 0; +} + +__tagtable(ATAG_SERIAL, parse_tag_serialnr); + +static int __init parse_tag_revision(const struct tag *tag) +{ + system_rev = tag->u.revision.rev; + return 0; +} + +__tagtable(ATAG_REVISION, parse_tag_revision); + +static int __init parse_tag_cmdline(const struct tag *tag) +{ +#if defined(CONFIG_CMDLINE_EXTEND) + strlcat(default_command_line, " ", COMMAND_LINE_SIZE); + strlcat(default_command_line, tag->u.cmdline.cmdline, + COMMAND_LINE_SIZE); +#elif defined(CONFIG_CMDLINE_FORCE) + pr_warning("Ignoring tag cmdline (using the default kernel command line)\n"); +#else + strlcpy(default_command_line, tag->u.cmdline.cmdline, + COMMAND_LINE_SIZE); +#endif + return 0; +} + +__tagtable(ATAG_CMDLINE, parse_tag_cmdline); + +/* + * Scan the tag table for this tag, and call its parse function. + * The tag table is built by the linker from all the __tagtable + * declarations. + */ +static int __init parse_tag(const struct tag *tag) +{ + extern struct tagtable __tagtable_begin, __tagtable_end; + struct tagtable *t; + + for (t = &__tagtable_begin; t < &__tagtable_end; t++) + if (tag->hdr.tag == t->tag) { + t->parse(tag); + break; + } + + return t < &__tagtable_end; +} + +/* + * Parse all tags in the list, checking both the global and architecture + * specific tag tables. + */ +static void __init parse_tags(const struct tag *t) +{ + for (; t->hdr.size; t = tag_next(t)) + if (!parse_tag(t)) + printk(KERN_WARNING + "Ignoring unrecognised tag 0x%08x\n", + t->hdr.tag); +} + +static void __init squash_mem_tags(struct tag *tag) +{ + for (; tag->hdr.size; tag = tag_next(tag)) + if (tag->hdr.tag == ATAG_MEM) + tag->hdr.tag = ATAG_NONE; +} + +struct machine_desc * __init setup_machine_tags(phys_addr_t __atags_pointer, + unsigned int machine_nr) +{ + struct tag *tags = (struct tag *)&default_tags; + struct machine_desc *mdesc = NULL, *p; + char *from = default_command_line; + + default_tags.mem.start = PHYS_OFFSET; + + /* + * locate machine in the list of supported machines. + */ + for_each_machine_desc(p) + if (machine_nr == p->nr) { + printk("Machine: %s\n", p->name); + mdesc = p; + break; + } + + if (!mdesc) { + early_print("\nError: unrecognized/unsupported machine ID" + " (r1 = 0x%08x).\n\n", machine_nr); + dump_machine_table(); /* does not return */ + } + + if (__atags_pointer) + tags = phys_to_virt(__atags_pointer); + else if (mdesc->atag_offset) + tags = (void *)(PAGE_OFFSET + mdesc->atag_offset); + +#if defined(CONFIG_DEPRECATED_PARAM_STRUCT) + /* + * If we have the old style parameters, convert them to + * a tag list. + */ + if (tags->hdr.tag != ATAG_CORE) + convert_to_tag_list(tags); +#endif + if (tags->hdr.tag != ATAG_CORE) { + early_print("Warning: Neither atags nor dtb found\n"); + tags = (struct tag *)&default_tags; + } + + if (mdesc->fixup) + mdesc->fixup(tags, &from, &meminfo); + + if (tags->hdr.tag == ATAG_CORE) { + if (meminfo.nr_banks != 0) + squash_mem_tags(tags); + save_atags(tags); + parse_tags(tags); + } + + /* parse_early_param needs a boot_command_line */ + strlcpy(boot_command_line, from, COMMAND_LINE_SIZE); + + return mdesc; +} diff --git a/arch/arm/kernel/atags.c b/arch/arm/kernel/atags_proc.c index 42a1a14..42a1a14 100644 --- a/arch/arm/kernel/atags.c +++ b/arch/arm/kernel/atags_proc.c diff --git a/arch/arm/kernel/compat.h b/arch/arm/kernel/compat.h deleted file mode 100644 index 39264ab..0000000 --- a/arch/arm/kernel/compat.h +++ /dev/null @@ -1,11 +0,0 @@ -/* - * linux/arch/arm/kernel/compat.h - * - * Copyright (C) 2001 Russell King - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -extern void convert_to_tag_list(struct tag *tags); diff --git a/arch/arm/kernel/entry-common.S b/arch/arm/kernel/entry-common.S index 978eac5..f459870 100644 --- a/arch/arm/kernel/entry-common.S +++ b/arch/arm/kernel/entry-common.S @@ -94,6 +94,15 @@ ENDPROC(ret_from_fork) .equ NR_syscalls,0 #define CALL(x) .equ NR_syscalls,NR_syscalls+1 #include "calls.S" + +/* + * Ensure that the system call table is equal to __NR_syscalls, + * which is the value the rest of the system sees + */ +.ifne NR_syscalls - __NR_syscalls +.error "__NR_syscalls is not equal to the size of the syscall table" +.endif + #undef CALL #define CALL(x) .long x diff --git a/arch/arm/kernel/machine_kexec.c b/arch/arm/kernel/machine_kexec.c index dfcdb9f..e29c333 100644 --- a/arch/arm/kernel/machine_kexec.c +++ b/arch/arm/kernel/machine_kexec.c @@ -8,7 +8,9 @@ #include <linux/reboot.h> #include <linux/io.h> #include <linux/irq.h> +#include <linux/memblock.h> #include <asm/pgtable.h> +#include <linux/of_fdt.h> #include <asm/pgalloc.h> #include <asm/mmu_context.h> #include <asm/cacheflush.h> @@ -32,6 +34,29 @@ static atomic_t waiting_for_crash_ipi; int machine_kexec_prepare(struct kimage *image) { + struct kexec_segment *current_segment; + __be32 header; + int i, err; + + /* + * No segment at default ATAGs address. try to locate + * a dtb using magic. + */ + for (i = 0; i < image->nr_segments; i++) { + current_segment = &image->segment[i]; + + err = memblock_is_region_memory(current_segment->mem, + current_segment->memsz); + if (err) + return - EINVAL; + + err = get_user(header, (__be32*)current_segment->buf); + if (err) + return err; + + if (be32_to_cpu(header) == OF_DT_HEADER) + kexec_boot_atags = current_segment->mem; + } return 0; } @@ -122,7 +147,9 @@ void machine_kexec(struct kimage *image) kexec_start_address = image->start; kexec_indirection_page = page_list; kexec_mach_type = machine_arch_type; - kexec_boot_atags = image->start - KEXEC_ARM_ZIMAGE_OFFSET + KEXEC_ARM_ATAGS_OFFSET; + if (!kexec_boot_atags) + kexec_boot_atags = image->start - KEXEC_ARM_ZIMAGE_OFFSET + KEXEC_ARM_ATAGS_OFFSET; + /* copy our kernel relocation code to the control code page */ memcpy(reboot_code_buffer, diff --git a/arch/arm/kernel/ptrace.c b/arch/arm/kernel/ptrace.c index 3e0fc5f..739db3a 100644 --- a/arch/arm/kernel/ptrace.c +++ b/arch/arm/kernel/ptrace.c @@ -30,6 +30,9 @@ #include <asm/pgtable.h> #include <asm/traps.h> +#define CREATE_TRACE_POINTS +#include <trace/events/syscalls.h> + #define REG_PC 15 #define REG_PSR 16 /* @@ -918,11 +921,11 @@ static int ptrace_syscall_trace(struct pt_regs *regs, int scno, { unsigned long ip; + current_thread_info()->syscall = scno; + if (!test_thread_flag(TIF_SYSCALL_TRACE)) return scno; - current_thread_info()->syscall = scno; - /* * IP is used to denote syscall entry/exit: * IP = 0 -> entry, =1 -> exit @@ -941,15 +944,19 @@ static int ptrace_syscall_trace(struct pt_regs *regs, int scno, asmlinkage int syscall_trace_enter(struct pt_regs *regs, int scno) { - int ret = ptrace_syscall_trace(regs, scno, PTRACE_SYSCALL_ENTER); + scno = ptrace_syscall_trace(regs, scno, PTRACE_SYSCALL_ENTER); + if (test_thread_flag(TIF_SYSCALL_TRACEPOINT)) + trace_sys_enter(regs, scno); audit_syscall_entry(AUDIT_ARCH_ARM, scno, regs->ARM_r0, regs->ARM_r1, regs->ARM_r2, regs->ARM_r3); - return ret; + return scno; } asmlinkage int syscall_trace_exit(struct pt_regs *regs, int scno) { - int ret = ptrace_syscall_trace(regs, scno, PTRACE_SYSCALL_EXIT); + scno = ptrace_syscall_trace(regs, scno, PTRACE_SYSCALL_EXIT); + if (test_thread_flag(TIF_SYSCALL_TRACEPOINT)) + trace_sys_exit(regs, scno); audit_syscall_exit(regs); - return ret; + return scno; } diff --git a/arch/arm/kernel/sched_clock.c b/arch/arm/kernel/sched_clock.c index f451539..e21bac2 100644 --- a/arch/arm/kernel/sched_clock.c +++ b/arch/arm/kernel/sched_clock.c @@ -9,6 +9,7 @@ #include <linux/init.h> #include <linux/jiffies.h> #include <linux/kernel.h> +#include <linux/moduleparam.h> #include <linux/sched.h> #include <linux/syscore_ops.h> #include <linux/timer.h> @@ -27,6 +28,9 @@ struct clock_data { static void sched_clock_poll(unsigned long wrap_ticks); static DEFINE_TIMER(sched_clock_timer, sched_clock_poll, 0, 0); +static int irqtime = -1; + +core_param(irqtime, irqtime, int, 0400); static struct clock_data cd = { .mult = NSEC_PER_SEC / HZ, @@ -157,6 +161,10 @@ void __init setup_sched_clock(u32 (*read)(void), int bits, unsigned long rate) */ cd.epoch_ns = 0; + /* Enable IRQ time accounting if we have a fast enough sched_clock */ + if (irqtime > 0 || (irqtime == -1 && rate >= 1000000)) + enable_sched_clock_irqtime(); + pr_debug("Registered %pF as sched_clock source\n", read); } diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 725f9f2..febafa0 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -21,11 +21,9 @@ #include <linux/init.h> #include <linux/kexec.h> #include <linux/of_fdt.h> -#include <linux/root_dev.h> #include <linux/cpu.h> #include <linux/interrupt.h> #include <linux/smp.h> -#include <linux/fs.h> #include <linux/proc_fs.h> #include <linux/memblock.h> #include <linux/bug.h> @@ -56,15 +54,9 @@ #include <asm/unwind.h> #include <asm/memblock.h> -#if defined(CONFIG_DEPRECATED_PARAM_STRUCT) -#include "compat.h" -#endif #include "atags.h" #include "tcm.h" -#ifndef MEM_SIZE -#define MEM_SIZE (16*1024*1024) -#endif #if defined(CONFIG_FPE_NWFPE) || defined(CONFIG_FPE_FASTFPE) char fpe_type[8]; @@ -145,7 +137,6 @@ static const char *machine_name; static char __initdata cmd_line[COMMAND_LINE_SIZE]; struct machine_desc *machine_desc __initdata; -static char default_command_line[COMMAND_LINE_SIZE] __initdata = CONFIG_CMDLINE; static union { char c[4]; unsigned long l; } endian_test __initdata = { { 'l', '?', '?', 'b' } }; #define ENDIANNESS ((char)endian_test.l) @@ -583,21 +574,6 @@ static int __init early_mem(char *p) } early_param("mem", early_mem); -static void __init -setup_ramdisk(int doload, int prompt, int image_start, unsigned int rd_sz) -{ -#ifdef CONFIG_BLK_DEV_RAM - extern int rd_size, rd_image_start, rd_prompt, rd_doload; - - rd_image_start = image_start; - rd_prompt = prompt; - rd_doload = doload; - - if (rd_sz) - rd_size = rd_sz; -#endif -} - static void __init request_standard_resources(struct machine_desc *mdesc) { struct memblock_region *region; @@ -643,35 +619,6 @@ static void __init request_standard_resources(struct machine_desc *mdesc) request_resource(&ioport_resource, &lp2); } -/* - * Tag parsing. - * - * This is the new way of passing data to the kernel at boot time. Rather - * than passing a fixed inflexible structure to the kernel, we pass a list - * of variable-sized tags to the kernel. The first tag must be a ATAG_CORE - * tag for the list to be recognised (to distinguish the tagged list from - * a param_struct). The list is terminated with a zero-length tag (this tag - * is not parsed in any way). - */ -static int __init parse_tag_core(const struct tag *tag) -{ - if (tag->hdr.size > 2) { - if ((tag->u.core.flags & 1) == 0) - root_mountflags &= ~MS_RDONLY; - ROOT_DEV = old_decode_dev(tag->u.core.rootdev); - } - return 0; -} - -__tagtable(ATAG_CORE, parse_tag_core); - -static int __init parse_tag_mem32(const struct tag *tag) -{ - return arm_add_memory(tag->u.mem.start, tag->u.mem.size); -} - -__tagtable(ATAG_MEM, parse_tag_mem32); - #if defined(CONFIG_VGA_CONSOLE) || defined(CONFIG_DUMMY_CONSOLE) struct screen_info screen_info = { .orig_video_lines = 30, @@ -681,117 +628,8 @@ struct screen_info screen_info = { .orig_video_isVGA = 1, .orig_video_points = 8 }; - -static int __init parse_tag_videotext(const struct tag *tag) -{ - screen_info.orig_x = tag->u.videotext.x; - screen_info.orig_y = tag->u.videotext.y; - screen_info.orig_video_page = tag->u.videotext.video_page; - screen_info.orig_video_mode = tag->u.videotext.video_mode; - screen_info.orig_video_cols = tag->u.videotext.video_cols; - screen_info.orig_video_ega_bx = tag->u.videotext.video_ega_bx; - screen_info.orig_video_lines = tag->u.videotext.video_lines; - screen_info.orig_video_isVGA = tag->u.videotext.video_isvga; - screen_info.orig_video_points = tag->u.videotext.video_points; - return 0; -} - -__tagtable(ATAG_VIDEOTEXT, parse_tag_videotext); #endif -static int __init parse_tag_ramdisk(const struct tag *tag) -{ - setup_ramdisk((tag->u.ramdisk.flags & 1) == 0, - (tag->u.ramdisk.flags & 2) == 0, - tag->u.ramdisk.start, tag->u.ramdisk.size); - return 0; -} - -__tagtable(ATAG_RAMDISK, parse_tag_ramdisk); - -static int __init parse_tag_serialnr(const struct tag *tag) -{ - system_serial_low = tag->u.serialnr.low; - system_serial_high = tag->u.serialnr.high; - return 0; -} - -__tagtable(ATAG_SERIAL, parse_tag_serialnr); - -static int __init parse_tag_revision(const struct tag *tag) -{ - system_rev = tag->u.revision.rev; - return 0; -} - -__tagtable(ATAG_REVISION, parse_tag_revision); - -static int __init parse_tag_cmdline(const struct tag *tag) -{ -#if defined(CONFIG_CMDLINE_EXTEND) - strlcat(default_command_line, " ", COMMAND_LINE_SIZE); - strlcat(default_command_line, tag->u.cmdline.cmdline, - COMMAND_LINE_SIZE); -#elif defined(CONFIG_CMDLINE_FORCE) - pr_warning("Ignoring tag cmdline (using the default kernel command line)\n"); -#else - strlcpy(default_command_line, tag->u.cmdline.cmdline, - COMMAND_LINE_SIZE); -#endif - return 0; -} - -__tagtable(ATAG_CMDLINE, parse_tag_cmdline); - -/* - * Scan the tag table for this tag, and call its parse function. - * The tag table is built by the linker from all the __tagtable - * declarations. - */ -static int __init parse_tag(const struct tag *tag) -{ - extern struct tagtable __tagtable_begin, __tagtable_end; - struct tagtable *t; - - for (t = &__tagtable_begin; t < &__tagtable_end; t++) - if (tag->hdr.tag == t->tag) { - t->parse(tag); - break; - } - - return t < &__tagtable_end; -} - -/* - * Parse all tags in the list, checking both the global and architecture - * specific tag tables. - */ -static void __init parse_tags(const struct tag *t) -{ - for (; t->hdr.size; t = tag_next(t)) - if (!parse_tag(t)) - printk(KERN_WARNING - "Ignoring unrecognised tag 0x%08x\n", - t->hdr.tag); -} - -/* - * This holds our defaults. - */ -static struct init_tags { - struct tag_header hdr1; - struct tag_core core; - struct tag_header hdr2; - struct tag_mem32 mem; - struct tag_header hdr3; -} init_tags __initdata = { - { tag_size(tag_core), ATAG_CORE }, - { 1, PAGE_SIZE, 0xff }, - { tag_size(tag_mem32), ATAG_MEM }, - { MEM_SIZE }, - { 0, ATAG_NONE } -}; - static int __init customize_machine(void) { /* customizes platform devices, or adds new ones */ @@ -858,78 +696,6 @@ static void __init reserve_crashkernel(void) static inline void reserve_crashkernel(void) {} #endif /* CONFIG_KEXEC */ -static void __init squash_mem_tags(struct tag *tag) -{ - for (; tag->hdr.size; tag = tag_next(tag)) - if (tag->hdr.tag == ATAG_MEM) - tag->hdr.tag = ATAG_NONE; -} - -static struct machine_desc * __init setup_machine_tags(unsigned int nr) -{ - struct tag *tags = (struct tag *)&init_tags; - struct machine_desc *mdesc = NULL, *p; - char *from = default_command_line; - - init_tags.mem.start = PHYS_OFFSET; - - /* - * locate machine in the list of supported machines. - */ - for_each_machine_desc(p) - if (nr == p->nr) { - printk("Machine: %s\n", p->name); - mdesc = p; - break; - } - - if (!mdesc) { - early_print("\nError: unrecognized/unsupported machine ID" - " (r1 = 0x%08x).\n\n", nr); - dump_machine_table(); /* does not return */ - } - - if (__atags_pointer) - tags = phys_to_virt(__atags_pointer); - else if (mdesc->atag_offset) - tags = (void *)(PAGE_OFFSET + mdesc->atag_offset); - -#if defined(CONFIG_DEPRECATED_PARAM_STRUCT) - /* - * If we have the old style parameters, convert them to - * a tag list. - */ - if (tags->hdr.tag != ATAG_CORE) - convert_to_tag_list(tags); -#endif - - if (tags->hdr.tag != ATAG_CORE) { -#if defined(CONFIG_OF) - /* - * If CONFIG_OF is set, then assume this is a reasonably - * modern system that should pass boot parameters - */ - early_print("Warning: Neither atags nor dtb found\n"); -#endif - tags = (struct tag *)&init_tags; - } - - if (mdesc->fixup) - mdesc->fixup(tags, &from, &meminfo); - - if (tags->hdr.tag == ATAG_CORE) { - if (meminfo.nr_banks != 0) - squash_mem_tags(tags); - save_atags(tags); - parse_tags(tags); - } - - /* parse_early_param needs a boot_command_line */ - strlcpy(boot_command_line, from, COMMAND_LINE_SIZE); - - return mdesc; -} - static int __init meminfo_cmp(const void *_a, const void *_b) { const struct membank *a = _a, *b = _b; @@ -944,7 +710,7 @@ void __init setup_arch(char **cmdline_p) setup_processor(); mdesc = setup_machine_fdt(__atags_pointer); if (!mdesc) - mdesc = setup_machine_tags(machine_arch_type); + mdesc = setup_machine_tags(__atags_pointer, machine_arch_type); machine_desc = mdesc; machine_name = mdesc->name; diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c index dea7a92..d100eac 100644 --- a/arch/arm/kernel/smp.c +++ b/arch/arm/kernel/smp.c @@ -59,7 +59,8 @@ struct secondary_data secondary_data; volatile int __cpuinitdata pen_release = -1; enum ipi_msg_type { - IPI_TIMER = 2, + IPI_WAKEUP, + IPI_TIMER, IPI_RESCHEDULE, IPI_CALL_FUNC, IPI_CALL_FUNC_SINGLE, @@ -414,7 +415,8 @@ void arch_send_call_function_single_ipi(int cpu) } static const char *ipi_types[NR_IPI] = { -#define S(x,s) [x - IPI_TIMER] = s +#define S(x,s) [x] = s + S(IPI_WAKEUP, "CPU wakeup interrupts"), S(IPI_TIMER, "Timer broadcast interrupts"), S(IPI_RESCHEDULE, "Rescheduling interrupts"), S(IPI_CALL_FUNC, "Function call interrupts"), @@ -567,10 +569,13 @@ void handle_IPI(int ipinr, struct pt_regs *regs) unsigned int cpu = smp_processor_id(); struct pt_regs *old_regs = set_irq_regs(regs); - if (ipinr >= IPI_TIMER && ipinr < IPI_TIMER + NR_IPI) - __inc_irq_stat(cpu, ipi_irqs[ipinr - IPI_TIMER]); + if (ipinr < NR_IPI) + __inc_irq_stat(cpu, ipi_irqs[ipinr]); switch (ipinr) { + case IPI_WAKEUP: + break; + case IPI_TIMER: irq_enter(); ipi_timer(); diff --git a/arch/arm/lib/delay.c b/arch/arm/lib/delay.c index 395d5fb..9d0a300 100644 --- a/arch/arm/lib/delay.c +++ b/arch/arm/lib/delay.c @@ -34,7 +34,18 @@ struct arm_delay_ops arm_delay_ops = { .udelay = __loop_udelay, }; -#ifdef ARCH_HAS_READ_CURRENT_TIMER +static const struct delay_timer *delay_timer; +static bool delay_calibrated; + +int read_current_timer(unsigned long *timer_val) +{ + if (!delay_timer) + return -ENXIO; + + *timer_val = delay_timer->read_current_timer(); + return 0; +} + static void __timer_delay(unsigned long cycles) { cycles_t start = get_cycles(); @@ -55,18 +66,24 @@ static void __timer_udelay(unsigned long usecs) __timer_const_udelay(usecs * UDELAY_MULT); } -void __init init_current_timer_delay(unsigned long freq) +void __init register_current_timer_delay(const struct delay_timer *timer) { - pr_info("Switching to timer-based delay loop\n"); - lpj_fine = freq / HZ; - loops_per_jiffy = lpj_fine; - arm_delay_ops.delay = __timer_delay; - arm_delay_ops.const_udelay = __timer_const_udelay; - arm_delay_ops.udelay = __timer_udelay; + if (!delay_calibrated) { + pr_info("Switching to timer-based delay loop\n"); + delay_timer = timer; + lpj_fine = timer->freq / HZ; + loops_per_jiffy = lpj_fine; + arm_delay_ops.delay = __timer_delay; + arm_delay_ops.const_udelay = __timer_const_udelay; + arm_delay_ops.udelay = __timer_udelay; + delay_calibrated = true; + } else { + pr_info("Ignoring duplicate/late registration of read_current_timer delay\n"); + } } unsigned long __cpuinit calibrate_delay_is_known(void) { + delay_calibrated = true; return lpj_fine; } -#endif diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c index 2c2d865..5315f05 100644 --- a/arch/arm/mach-at91/pm.c +++ b/arch/arm/mach-at91/pm.c @@ -153,7 +153,9 @@ static int at91_pm_verify_clocks(void) } } -#ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS + if (!IS_ENABLED(CONFIG_AT91_PROGRAMMABLE_CLOCKS)) + return 1; + /* PCK0..PCK3 must be disabled, or configured to use clk32k */ for (i = 0; i < 4; i++) { u32 css; @@ -167,7 +169,6 @@ static int at91_pm_verify_clocks(void) return 0; } } -#endif return 1; } diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c index e6f52de..da9881b 100644 --- a/arch/arm/mach-at91/setup.c +++ b/arch/arm/mach-at91/setup.c @@ -87,7 +87,7 @@ void __init at91_init_sram(int bank, unsigned long base, unsigned int length) iotable_init(desc, 1); } -static struct map_desc at91_io_desc __initdata = { +static struct map_desc at91_io_desc __initdata __maybe_unused = { .virtual = (unsigned long)AT91_VA_BASE_SYS, .pfn = __phys_to_pfn(AT91_BASE_SYS), .length = SZ_16K, diff --git a/arch/arm/mach-davinci/da850.c b/arch/arm/mach-davinci/da850.c index 6676dee..e517e10 100644 --- a/arch/arm/mach-davinci/da850.c +++ b/arch/arm/mach-davinci/da850.c @@ -939,7 +939,7 @@ static struct platform_device da850_cpufreq_device = { unsigned int da850_max_speed = 300000; -int __init da850_register_cpufreq(char *async_clk) +int da850_register_cpufreq(char *async_clk) { int i; diff --git a/arch/arm/mach-exynos/platsmp.c b/arch/arm/mach-exynos/platsmp.c index 8d57e42..f93d820 100644 --- a/arch/arm/mach-exynos/platsmp.c +++ b/arch/arm/mach-exynos/platsmp.c @@ -134,7 +134,7 @@ static int __cpuinit exynos_boot_secondary(unsigned int cpu, struct task_struct __raw_writel(virt_to_phys(exynos4_secondary_startup), CPU1_BOOT_REG); - gic_raise_softirq(cpumask_of(cpu), 1); + gic_raise_softirq(cpumask_of(cpu), 0); if (pen_release == -1) break; diff --git a/arch/arm/mach-footbridge/include/mach/irqs.h b/arch/arm/mach-footbridge/include/mach/irqs.h index 400551e..61c714c 100644 --- a/arch/arm/mach-footbridge/include/mach/irqs.h +++ b/arch/arm/mach-footbridge/include/mach/irqs.h @@ -89,8 +89,6 @@ #define IRQ_NETWINDER_VGA _ISA_IRQ(11) #define IRQ_NETWINDER_SOUND _ISA_IRQ(12) -#undef RTC_IRQ -#define RTC_IRQ IRQ_ISA_RTC_ALARM #define I8042_KBD_IRQ IRQ_ISA_KEYBOARD #define I8042_AUX_IRQ (machine_is_netwinder() ? IRQ_NETWINDER_PS2MOUSE : IRQ_ISA_PS2MOUSE) #define IRQ_FLOPPYDISK IRQ_ISA_FLOPPY diff --git a/arch/arm/mach-integrator/common.h b/arch/arm/mach-integrator/common.h index 899561d..c3ff21b 100644 --- a/arch/arm/mach-integrator/common.h +++ b/arch/arm/mach-integrator/common.h @@ -1,3 +1,6 @@ +#include <linux/amba/serial.h> +extern struct amba_pl010_data integrator_uart_data; void integrator_init_early(void); +int integrator_init(bool is_cp); void integrator_reserve(void); void integrator_restart(char, const char *); diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c index dad3cb7..ea22a17 100644 --- a/arch/arm/mach-integrator/core.c +++ b/arch/arm/mach-integrator/core.c @@ -32,7 +32,9 @@ #include <asm/mach/time.h> #include <asm/pgtable.h> -static struct amba_pl010_data integrator_uart_data; +#include "common.h" + +#ifdef CONFIG_ATAGS #define INTEGRATOR_RTC_IRQ { IRQ_RTCINT } #define INTEGRATOR_UART0_IRQ { IRQ_UARTINT0 } @@ -60,7 +62,7 @@ static struct amba_device *amba_devs[] __initdata = { &kmi1_device, }; -static int __init integrator_init(void) +int __init integrator_init(bool is_cp) { int i; @@ -69,7 +71,7 @@ static int __init integrator_init(void) * hard-code them. The Integator/CP and forward have proper cell IDs. * Else we leave them undefined to the bus driver can autoprobe them. */ - if (machine_is_integrator()) { + if (!is_cp) { rtc_device.periphid = 0x00041030; uart0_device.periphid = 0x00041010; uart1_device.periphid = 0x00041010; @@ -85,7 +87,7 @@ static int __init integrator_init(void) return 0; } -arch_initcall(integrator_init); +#endif /* * On the Integrator platform, the port RTS and DTR are provided by @@ -100,11 +102,14 @@ arch_initcall(integrator_init); static void integrator_uart_set_mctrl(struct amba_device *dev, void __iomem *base, unsigned int mctrl) { unsigned int ctrls = 0, ctrlc = 0, rts_mask, dtr_mask; + u32 phybase = dev->res.start; - if (dev == &uart0_device) { + if (phybase == INTEGRATOR_UART0_BASE) { + /* UART0 */ rts_mask = 1 << 4; dtr_mask = 1 << 5; } else { + /* UART1 */ rts_mask = 1 << 6; dtr_mask = 1 << 7; } @@ -123,7 +128,7 @@ static void integrator_uart_set_mctrl(struct amba_device *dev, void __iomem *bas __raw_writel(ctrlc, SC_CTRLC); } -static struct amba_pl010_data integrator_uart_data = { +struct amba_pl010_data integrator_uart_data = { .set_mctrl = integrator_uart_set_mctrl, }; diff --git a/arch/arm/mach-integrator/include/mach/cm.h b/arch/arm/mach-integrator/include/mach/cm.h index 1a78692e..202e6a5 100644 --- a/arch/arm/mach-integrator/include/mach/cm.h +++ b/arch/arm/mach-integrator/include/mach/cm.h @@ -3,7 +3,7 @@ */ void cm_control(u32, u32); -#define CM_CTRL IO_ADDRESS(INTEGRATOR_HDR_CTRL) +#define CM_CTRL __io_address(INTEGRATOR_HDR_CTRL) #define CM_CTRL_LED (1 << 0) #define CM_CTRL_nMBDET (1 << 1) diff --git a/arch/arm/mach-integrator/include/mach/platform.h b/arch/arm/mach-integrator/include/mach/platform.h index 4c03475..efeac5d 100644 --- a/arch/arm/mach-integrator/include/mach/platform.h +++ b/arch/arm/mach-integrator/include/mach/platform.h @@ -324,9 +324,9 @@ */ #define PHYS_PCI_V3_BASE 0x62000000 -#define PCI_MEMORY_VADDR 0xe8000000 -#define PCI_CONFIG_VADDR 0xec000000 -#define PCI_V3_VADDR 0xed000000 +#define PCI_MEMORY_VADDR IOMEM(0xe8000000) +#define PCI_CONFIG_VADDR IOMEM(0xec000000) +#define PCI_V3_VADDR IOMEM(0xed000000) /* ------------------------------------------------------------------------ * Integrator Interrupt Controllers diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c index 2215d96..e6617c1 100644 --- a/arch/arm/mach-integrator/integrator_ap.c +++ b/arch/arm/mach-integrator/integrator_ap.c @@ -34,6 +34,9 @@ #include <linux/mtd/physmap.h> #include <linux/clk.h> #include <linux/platform_data/clk-integrator.h> +#include <linux/of_irq.h> +#include <linux/of_address.h> +#include <linux/of_platform.h> #include <video/vga.h> #include <mach/hardware.h> @@ -154,27 +157,10 @@ static struct map_desc ap_io_desc[] __initdata = { static void __init ap_map_io(void) { iotable_init(ap_io_desc, ARRAY_SIZE(ap_io_desc)); - vga_base = PCI_MEMORY_VADDR; + vga_base = (unsigned long)PCI_MEMORY_VADDR; pci_map_io_early(__phys_to_pfn(PHYS_PCI_IO_BASE)); } -#define INTEGRATOR_SC_VALID_INT 0x003fffff - -static void __init ap_init_irq(void) -{ - /* Disable all interrupts initially. */ - /* Do the core module ones */ - writel(-1, VA_CMIC_BASE + IRQ_ENABLE_CLEAR); - - /* do the header card stuff next */ - writel(-1, VA_IC_BASE + IRQ_ENABLE_CLEAR); - writel(-1, VA_IC_BASE + FIQ_ENABLE_CLEAR); - - fpga_irq_init(VA_IC_BASE, "SC", IRQ_PIC_START, - -1, INTEGRATOR_SC_VALID_INT, NULL); - integrator_clk_init(false); -} - #ifdef CONFIG_PM static unsigned long ic_irq_enable; @@ -267,50 +253,6 @@ static struct physmap_flash_data ap_flash_data = { .set_vpp = ap_flash_set_vpp, }; -static struct resource cfi_flash_resource = { - .start = INTEGRATOR_FLASH_BASE, - .end = INTEGRATOR_FLASH_BASE + INTEGRATOR_FLASH_SIZE - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device cfi_flash_device = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &ap_flash_data, - }, - .num_resources = 1, - .resource = &cfi_flash_resource, -}; - -static void __init ap_init(void) -{ - unsigned long sc_dec; - int i; - - platform_device_register(&cfi_flash_device); - - sc_dec = readl(VA_SC_BASE + INTEGRATOR_SC_DEC_OFFSET); - for (i = 0; i < 4; i++) { - struct lm_device *lmdev; - - if ((sc_dec & (16 << i)) == 0) - continue; - - lmdev = kzalloc(sizeof(struct lm_device), GFP_KERNEL); - if (!lmdev) - continue; - - lmdev->resource.start = 0xc0000000 + 0x10000000 * i; - lmdev->resource.end = lmdev->resource.start + 0x0fffffff; - lmdev->resource.flags = IORESOURCE_MEM; - lmdev->irq = IRQ_AP_EXPINT0 + i; - lmdev->id = i; - - lm_device_register(lmdev); - } -} - /* * Where is the timer (VA)? */ @@ -325,9 +267,9 @@ static u32 notrace integrator_read_sched_clock(void) return -readl((void __iomem *) TIMER2_VA_BASE + TIMER_VALUE); } -static void integrator_clocksource_init(unsigned long inrate) +static void integrator_clocksource_init(unsigned long inrate, + void __iomem *base) { - void __iomem *base = (void __iomem *)TIMER2_VA_BASE; u32 ctrl = TIMER_CTRL_ENABLE | TIMER_CTRL_PERIODIC; unsigned long rate = inrate; @@ -344,7 +286,7 @@ static void integrator_clocksource_init(unsigned long inrate) setup_sched_clock(integrator_read_sched_clock, 16, rate); } -static void __iomem * const clkevt_base = (void __iomem *)TIMER1_VA_BASE; +static void __iomem * clkevt_base; /* * IRQ handler for the timer @@ -416,11 +358,13 @@ static struct irqaction integrator_timer_irq = { .dev_id = &integrator_clockevent, }; -static void integrator_clockevent_init(unsigned long inrate) +static void integrator_clockevent_init(unsigned long inrate, + void __iomem *base, int irq) { unsigned long rate = inrate; unsigned int ctrl = 0; + clkevt_base = base; /* Calculate and program a divisor */ if (rate > 0x100000 * HZ) { rate /= 256; @@ -432,7 +376,7 @@ static void integrator_clockevent_init(unsigned long inrate) timer_reload = rate / HZ; writel(ctrl, clkevt_base + TIMER_CTRL); - setup_irq(IRQ_TIMERINT1, &integrator_timer_irq); + setup_irq(irq, &integrator_timer_irq); clockevents_config_and_register(&integrator_clockevent, rate, 1, @@ -443,9 +387,153 @@ void __init ap_init_early(void) { } +#ifdef CONFIG_OF + +static void __init ap_init_timer_of(void) +{ + struct device_node *node; + const char *path; + void __iomem *base; + int err; + int irq; + struct clk *clk; + unsigned long rate; + + clk = clk_get_sys("ap_timer", NULL); + BUG_ON(IS_ERR(clk)); + clk_prepare_enable(clk); + rate = clk_get_rate(clk); + + err = of_property_read_string(of_aliases, + "arm,timer-primary", &path); + if (WARN_ON(err)) + return; + node = of_find_node_by_path(path); + base = of_iomap(node, 0); + if (WARN_ON(!base)) + return; + writel(0, base + TIMER_CTRL); + integrator_clocksource_init(rate, base); + + err = of_property_read_string(of_aliases, + "arm,timer-secondary", &path); + if (WARN_ON(err)) + return; + node = of_find_node_by_path(path); + base = of_iomap(node, 0); + if (WARN_ON(!base)) + return; + irq = irq_of_parse_and_map(node, 0); + writel(0, base + TIMER_CTRL); + integrator_clockevent_init(rate, base, irq); +} + +static struct sys_timer ap_of_timer = { + .init = ap_init_timer_of, +}; + +static const struct of_device_id fpga_irq_of_match[] __initconst = { + { .compatible = "arm,versatile-fpga-irq", .data = fpga_irq_of_init, }, + { /* Sentinel */ } +}; + +static void __init ap_init_irq_of(void) +{ + /* disable core module IRQs */ + writel(0xffffffffU, VA_CMIC_BASE + IRQ_ENABLE_CLEAR); + of_irq_init(fpga_irq_of_match); + integrator_clk_init(false); +} + +/* For the Device Tree, add in the UART callbacks as AUXDATA */ +static struct of_dev_auxdata ap_auxdata_lookup[] __initdata = { + OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_RTC_BASE, + "rtc", NULL), + OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_UART0_BASE, + "uart0", &integrator_uart_data), + OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_UART1_BASE, + "uart1", &integrator_uart_data), + OF_DEV_AUXDATA("arm,primecell", KMI0_BASE, + "kmi0", NULL), + OF_DEV_AUXDATA("arm,primecell", KMI1_BASE, + "kmi1", NULL), + OF_DEV_AUXDATA("cfi-flash", INTEGRATOR_FLASH_BASE, + "physmap-flash", &ap_flash_data), + { /* sentinel */ }, +}; + +static void __init ap_init_of(void) +{ + unsigned long sc_dec; + int i; + + of_platform_populate(NULL, of_default_bus_match_table, + ap_auxdata_lookup, NULL); + + sc_dec = readl(VA_SC_BASE + INTEGRATOR_SC_DEC_OFFSET); + for (i = 0; i < 4; i++) { + struct lm_device *lmdev; + + if ((sc_dec & (16 << i)) == 0) + continue; + + lmdev = kzalloc(sizeof(struct lm_device), GFP_KERNEL); + if (!lmdev) + continue; + + lmdev->resource.start = 0xc0000000 + 0x10000000 * i; + lmdev->resource.end = lmdev->resource.start + 0x0fffffff; + lmdev->resource.flags = IORESOURCE_MEM; + lmdev->irq = IRQ_AP_EXPINT0 + i; + lmdev->id = i; + + lm_device_register(lmdev); + } +} + +static const char * ap_dt_board_compat[] = { + "arm,integrator-ap", + NULL, +}; + +DT_MACHINE_START(INTEGRATOR_AP_DT, "ARM Integrator/AP (Device Tree)") + .reserve = integrator_reserve, + .map_io = ap_map_io, + .nr_irqs = NR_IRQS_INTEGRATOR_AP, + .init_early = ap_init_early, + .init_irq = ap_init_irq_of, + .handle_irq = fpga_handle_irq, + .timer = &ap_of_timer, + .init_machine = ap_init_of, + .restart = integrator_restart, + .dt_compat = ap_dt_board_compat, +MACHINE_END + +#endif + +#ifdef CONFIG_ATAGS + /* - * Set up timer(s). + * This is where non-devicetree initialization code is collected and stashed + * for eventual deletion. */ + +static struct resource cfi_flash_resource = { + .start = INTEGRATOR_FLASH_BASE, + .end = INTEGRATOR_FLASH_BASE + INTEGRATOR_FLASH_SIZE - 1, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device cfi_flash_device = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &ap_flash_data, + }, + .num_resources = 1, + .resource = &cfi_flash_resource, +}; + static void __init ap_init_timer(void) { struct clk *clk; @@ -460,14 +548,62 @@ static void __init ap_init_timer(void) writel(0, TIMER1_VA_BASE + TIMER_CTRL); writel(0, TIMER2_VA_BASE + TIMER_CTRL); - integrator_clocksource_init(rate); - integrator_clockevent_init(rate); + integrator_clocksource_init(rate, (void __iomem *)TIMER2_VA_BASE); + integrator_clockevent_init(rate, (void __iomem *)TIMER1_VA_BASE, + IRQ_TIMERINT1); } static struct sys_timer ap_timer = { .init = ap_init_timer, }; +#define INTEGRATOR_SC_VALID_INT 0x003fffff + +static void __init ap_init_irq(void) +{ + /* Disable all interrupts initially. */ + /* Do the core module ones */ + writel(-1, VA_CMIC_BASE + IRQ_ENABLE_CLEAR); + + /* do the header card stuff next */ + writel(-1, VA_IC_BASE + IRQ_ENABLE_CLEAR); + writel(-1, VA_IC_BASE + FIQ_ENABLE_CLEAR); + + fpga_irq_init(VA_IC_BASE, "SC", IRQ_PIC_START, + -1, INTEGRATOR_SC_VALID_INT, NULL); + integrator_clk_init(false); +} + +static void __init ap_init(void) +{ + unsigned long sc_dec; + int i; + + platform_device_register(&cfi_flash_device); + + sc_dec = readl(VA_SC_BASE + INTEGRATOR_SC_DEC_OFFSET); + for (i = 0; i < 4; i++) { + struct lm_device *lmdev; + + if ((sc_dec & (16 << i)) == 0) + continue; + + lmdev = kzalloc(sizeof(struct lm_device), GFP_KERNEL); + if (!lmdev) + continue; + + lmdev->resource.start = 0xc0000000 + 0x10000000 * i; + lmdev->resource.end = lmdev->resource.start + 0x0fffffff; + lmdev->resource.flags = IORESOURCE_MEM; + lmdev->irq = IRQ_AP_EXPINT0 + i; + lmdev->id = i; + + lm_device_register(lmdev); + } + + integrator_init(false); +} + MACHINE_START(INTEGRATOR, "ARM-Integrator") /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ .atag_offset = 0x100, @@ -481,3 +617,5 @@ MACHINE_START(INTEGRATOR, "ARM-Integrator") .init_machine = ap_init, .restart = integrator_restart, MACHINE_END + +#endif diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c index 3df5fc3..5b08e8e 100644 --- a/arch/arm/mach-integrator/integrator_cp.c +++ b/arch/arm/mach-integrator/integrator_cp.c @@ -23,6 +23,9 @@ #include <linux/gfp.h> #include <linux/mtd/physmap.h> #include <linux/platform_data/clk-integrator.h> +#include <linux/of_irq.h> +#include <linux/of_address.h> +#include <linux/of_platform.h> #include <mach/hardware.h> #include <mach/platform.h> @@ -49,16 +52,9 @@ #include "common.h" #define INTCP_PA_FLASH_BASE 0x24000000 -#define INTCP_FLASH_SIZE SZ_32M #define INTCP_PA_CLCD_BASE 0xc0000000 -#define INTCP_VA_CIC_BASE __io_address(INTEGRATOR_HDR_BASE + 0x40) -#define INTCP_VA_PIC_BASE __io_address(INTEGRATOR_IC_BASE) -#define INTCP_VA_SIC_BASE __io_address(INTEGRATOR_CP_SIC_BASE) - -#define INTCP_ETH_SIZE 0x10 - #define INTCP_VA_CTRL_BASE __io_address(INTEGRATOR_CP_CTL_BASE) #define INTCP_FLASHPROG 0x04 #define CINTEGRATOR_FLASHPROG_FLVPPEN (1 << 0) @@ -143,37 +139,6 @@ static void __init intcp_map_io(void) iotable_init(intcp_io_desc, ARRAY_SIZE(intcp_io_desc)); } -static void __init intcp_init_irq(void) -{ - u32 pic_mask, cic_mask, sic_mask; - - /* These masks are for the HW IRQ registers */ - pic_mask = ~((~0u) << (11 - IRQ_PIC_START)); - pic_mask |= (~((~0u) << (29 - 22))) << 22; - cic_mask = ~((~0u) << (1 + IRQ_CIC_END - IRQ_CIC_START)); - sic_mask = ~((~0u) << (1 + IRQ_SIC_END - IRQ_SIC_START)); - - /* - * Disable all interrupt sources - */ - writel(0xffffffff, INTCP_VA_PIC_BASE + IRQ_ENABLE_CLEAR); - writel(0xffffffff, INTCP_VA_PIC_BASE + FIQ_ENABLE_CLEAR); - writel(0xffffffff, INTCP_VA_CIC_BASE + IRQ_ENABLE_CLEAR); - writel(0xffffffff, INTCP_VA_CIC_BASE + FIQ_ENABLE_CLEAR); - writel(sic_mask, INTCP_VA_SIC_BASE + IRQ_ENABLE_CLEAR); - writel(sic_mask, INTCP_VA_SIC_BASE + FIQ_ENABLE_CLEAR); - - fpga_irq_init(INTCP_VA_PIC_BASE, "PIC", IRQ_PIC_START, - -1, pic_mask, NULL); - - fpga_irq_init(INTCP_VA_CIC_BASE, "CIC", IRQ_CIC_START, - -1, cic_mask, NULL); - - fpga_irq_init(INTCP_VA_SIC_BASE, "SIC", IRQ_SIC_START, - IRQ_CP_CPPLDINT, sic_mask, NULL); - integrator_clk_init(true); -} - /* * Flash handling. */ @@ -216,47 +181,6 @@ static struct physmap_flash_data intcp_flash_data = { .set_vpp = intcp_flash_set_vpp, }; -static struct resource intcp_flash_resource = { - .start = INTCP_PA_FLASH_BASE, - .end = INTCP_PA_FLASH_BASE + INTCP_FLASH_SIZE - 1, - .flags = IORESOURCE_MEM, -}; - -static struct platform_device intcp_flash_device = { - .name = "physmap-flash", - .id = 0, - .dev = { - .platform_data = &intcp_flash_data, - }, - .num_resources = 1, - .resource = &intcp_flash_resource, -}; - -static struct resource smc91x_resources[] = { - [0] = { - .start = INTEGRATOR_CP_ETH_BASE, - .end = INTEGRATOR_CP_ETH_BASE + INTCP_ETH_SIZE - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_CP_ETHINT, - .end = IRQ_CP_ETHINT, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device smc91x_device = { - .name = "smc91x", - .id = 0, - .num_resources = ARRAY_SIZE(smc91x_resources), - .resource = smc91x_resources, -}; - -static struct platform_device *intcp_devs[] __initdata = { - &intcp_flash_device, - &smc91x_device, -}; - /* * It seems that the card insertion interrupt remains active after * we've acknowledged it. We therefore ignore the interrupt, and @@ -278,16 +202,6 @@ static struct mmci_platform_data mmc_data = { .gpio_cd = -1, }; -#define INTEGRATOR_CP_MMC_IRQS { IRQ_CP_MMCIINT0, IRQ_CP_MMCIINT1 } -#define INTEGRATOR_CP_AACI_IRQS { IRQ_CP_AACIINT } - -static AMBA_APB_DEVICE(mmc, "mmci", 0, INTEGRATOR_CP_MMC_BASE, - INTEGRATOR_CP_MMC_IRQS, &mmc_data); - -static AMBA_APB_DEVICE(aaci, "aaci", 0, INTEGRATOR_CP_AACI_BASE, - INTEGRATOR_CP_AACI_IRQS, NULL); - - /* * CLCD support */ @@ -338,15 +252,6 @@ static struct clcd_board clcd_data = { .remove = versatile_clcd_remove_dma, }; -static AMBA_AHB_DEVICE(clcd, "clcd", 0, INTCP_PA_CLCD_BASE, - { IRQ_CP_CLCDCINT }, &clcd_data); - -static struct amba_device *amba_devs[] __initdata = { - &mmc_device, - &aaci_device, - &clcd_device, -}; - #define REFCOUNTER (__io_address(INTEGRATOR_HDR_BASE) + 0x28) static void __init intcp_init_early(void) @@ -356,16 +261,193 @@ static void __init intcp_init_early(void) #endif } -static void __init intcp_init(void) +#ifdef CONFIG_OF + +static void __init intcp_timer_init_of(void) { - int i; + struct device_node *node; + const char *path; + void __iomem *base; + int err; + int irq; + + err = of_property_read_string(of_aliases, + "arm,timer-primary", &path); + if (WARN_ON(err)) + return; + node = of_find_node_by_path(path); + base = of_iomap(node, 0); + if (WARN_ON(!base)) + return; + writel(0, base + TIMER_CTRL); + sp804_clocksource_init(base, node->name); + + err = of_property_read_string(of_aliases, + "arm,timer-secondary", &path); + if (WARN_ON(err)) + return; + node = of_find_node_by_path(path); + base = of_iomap(node, 0); + if (WARN_ON(!base)) + return; + irq = irq_of_parse_and_map(node, 0); + writel(0, base + TIMER_CTRL); + sp804_clockevents_init(base, irq, node->name); +} - platform_add_devices(intcp_devs, ARRAY_SIZE(intcp_devs)); +static struct sys_timer cp_of_timer = { + .init = intcp_timer_init_of, +}; - for (i = 0; i < ARRAY_SIZE(amba_devs); i++) { - struct amba_device *d = amba_devs[i]; - amba_device_register(d, &iomem_resource); - } +static const struct of_device_id fpga_irq_of_match[] __initconst = { + { .compatible = "arm,versatile-fpga-irq", .data = fpga_irq_of_init, }, + { /* Sentinel */ } +}; + +static void __init intcp_init_irq_of(void) +{ + of_irq_init(fpga_irq_of_match); + integrator_clk_init(true); +} + +/* + * For the Device Tree, add in the UART, MMC and CLCD specifics as AUXDATA + * and enforce the bus names since these are used for clock lookups. + */ +static struct of_dev_auxdata intcp_auxdata_lookup[] __initdata = { + OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_RTC_BASE, + "rtc", NULL), + OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_UART0_BASE, + "uart0", &integrator_uart_data), + OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_UART1_BASE, + "uart1", &integrator_uart_data), + OF_DEV_AUXDATA("arm,primecell", KMI0_BASE, + "kmi0", NULL), + OF_DEV_AUXDATA("arm,primecell", KMI1_BASE, + "kmi1", NULL), + OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_CP_MMC_BASE, + "mmci", &mmc_data), + OF_DEV_AUXDATA("arm,primecell", INTEGRATOR_CP_AACI_BASE, + "aaci", &mmc_data), + OF_DEV_AUXDATA("arm,primecell", INTCP_PA_CLCD_BASE, + "clcd", &clcd_data), + OF_DEV_AUXDATA("cfi-flash", INTCP_PA_FLASH_BASE, + "physmap-flash", &intcp_flash_data), + { /* sentinel */ }, +}; + +static void __init intcp_init_of(void) +{ + of_platform_populate(NULL, of_default_bus_match_table, + intcp_auxdata_lookup, NULL); +} + +static const char * intcp_dt_board_compat[] = { + "arm,integrator-cp", + NULL, +}; + +DT_MACHINE_START(INTEGRATOR_CP_DT, "ARM Integrator/CP (Device Tree)") + .reserve = integrator_reserve, + .map_io = intcp_map_io, + .nr_irqs = NR_IRQS_INTEGRATOR_CP, + .init_early = intcp_init_early, + .init_irq = intcp_init_irq_of, + .handle_irq = fpga_handle_irq, + .timer = &cp_of_timer, + .init_machine = intcp_init_of, + .restart = integrator_restart, + .dt_compat = intcp_dt_board_compat, +MACHINE_END + +#endif + +#ifdef CONFIG_ATAGS + +/* + * This is where non-devicetree initialization code is collected and stashed + * for eventual deletion. + */ + +#define INTCP_FLASH_SIZE SZ_32M + +static struct resource intcp_flash_resource = { + .start = INTCP_PA_FLASH_BASE, + .end = INTCP_PA_FLASH_BASE + INTCP_FLASH_SIZE - 1, + .flags = IORESOURCE_MEM, +}; + +static struct platform_device intcp_flash_device = { + .name = "physmap-flash", + .id = 0, + .dev = { + .platform_data = &intcp_flash_data, + }, + .num_resources = 1, + .resource = &intcp_flash_resource, +}; + +#define INTCP_ETH_SIZE 0x10 + +static struct resource smc91x_resources[] = { + [0] = { + .start = INTEGRATOR_CP_ETH_BASE, + .end = INTEGRATOR_CP_ETH_BASE + INTCP_ETH_SIZE - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_CP_ETHINT, + .end = IRQ_CP_ETHINT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device smc91x_device = { + .name = "smc91x", + .id = 0, + .num_resources = ARRAY_SIZE(smc91x_resources), + .resource = smc91x_resources, +}; + +static struct platform_device *intcp_devs[] __initdata = { + &intcp_flash_device, + &smc91x_device, +}; + +#define INTCP_VA_CIC_BASE __io_address(INTEGRATOR_HDR_BASE + 0x40) +#define INTCP_VA_PIC_BASE __io_address(INTEGRATOR_IC_BASE) +#define INTCP_VA_SIC_BASE __io_address(INTEGRATOR_CP_SIC_BASE) + +static void __init intcp_init_irq(void) +{ + u32 pic_mask, cic_mask, sic_mask; + + /* These masks are for the HW IRQ registers */ + pic_mask = ~((~0u) << (11 - IRQ_PIC_START)); + pic_mask |= (~((~0u) << (29 - 22))) << 22; + cic_mask = ~((~0u) << (1 + IRQ_CIC_END - IRQ_CIC_START)); + sic_mask = ~((~0u) << (1 + IRQ_SIC_END - IRQ_SIC_START)); + + /* + * Disable all interrupt sources + */ + writel(0xffffffff, INTCP_VA_PIC_BASE + IRQ_ENABLE_CLEAR); + writel(0xffffffff, INTCP_VA_PIC_BASE + FIQ_ENABLE_CLEAR); + writel(0xffffffff, INTCP_VA_CIC_BASE + IRQ_ENABLE_CLEAR); + writel(0xffffffff, INTCP_VA_CIC_BASE + FIQ_ENABLE_CLEAR); + writel(sic_mask, INTCP_VA_SIC_BASE + IRQ_ENABLE_CLEAR); + writel(sic_mask, INTCP_VA_SIC_BASE + FIQ_ENABLE_CLEAR); + + fpga_irq_init(INTCP_VA_PIC_BASE, "PIC", IRQ_PIC_START, + -1, pic_mask, NULL); + + fpga_irq_init(INTCP_VA_CIC_BASE, "CIC", IRQ_CIC_START, + -1, cic_mask, NULL); + + fpga_irq_init(INTCP_VA_SIC_BASE, "SIC", IRQ_SIC_START, + IRQ_CP_CPPLDINT, sic_mask, NULL); + + integrator_clk_init(true); } #define TIMER0_VA_BASE __io_address(INTEGRATOR_TIMER0_BASE) @@ -386,6 +468,37 @@ static struct sys_timer cp_timer = { .init = intcp_timer_init, }; +#define INTEGRATOR_CP_MMC_IRQS { IRQ_CP_MMCIINT0, IRQ_CP_MMCIINT1 } +#define INTEGRATOR_CP_AACI_IRQS { IRQ_CP_AACIINT } + +static AMBA_APB_DEVICE(mmc, "mmci", 0, INTEGRATOR_CP_MMC_BASE, + INTEGRATOR_CP_MMC_IRQS, &mmc_data); + +static AMBA_APB_DEVICE(aaci, "aaci", 0, INTEGRATOR_CP_AACI_BASE, + INTEGRATOR_CP_AACI_IRQS, NULL); + +static AMBA_AHB_DEVICE(clcd, "clcd", 0, INTCP_PA_CLCD_BASE, + { IRQ_CP_CLCDCINT }, &clcd_data); + +static struct amba_device *amba_devs[] __initdata = { + &mmc_device, + &aaci_device, + &clcd_device, +}; + +static void __init intcp_init(void) +{ + int i; + + platform_add_devices(intcp_devs, ARRAY_SIZE(intcp_devs)); + + for (i = 0; i < ARRAY_SIZE(amba_devs); i++) { + struct amba_device *d = amba_devs[i]; + amba_device_register(d, &iomem_resource); + } + integrator_init(true); +} + MACHINE_START(CINTEGRATOR, "ARM-IntegratorCP") /* Maintainer: ARM Ltd/Deep Blue Solutions Ltd */ .atag_offset = 0x100, @@ -399,3 +512,5 @@ MACHINE_START(CINTEGRATOR, "ARM-IntegratorCP") .init_machine = intcp_init, .restart = integrator_restart, MACHINE_END + +#endif diff --git a/arch/arm/mach-iop13xx/iq81340sc.c b/arch/arm/mach-iop13xx/iq81340sc.c index 060cddd..e947441 100644 --- a/arch/arm/mach-iop13xx/iq81340sc.c +++ b/arch/arm/mach-iop13xx/iq81340sc.c @@ -30,7 +30,7 @@ extern int init_atu; static int __init -iq81340sc_atux_map_irq(struct pci_dev *dev, u8 idsel, u8 pin) +iq81340sc_atux_map_irq(const struct pci_dev *dev, u8 idsel, u8 pin) { WARN_ON(idsel < 1 || idsel > 2); diff --git a/arch/arm/mach-iop13xx/pci.c b/arch/arm/mach-iop13xx/pci.c index 9082b84..2f28018 100644 --- a/arch/arm/mach-iop13xx/pci.c +++ b/arch/arm/mach-iop13xx/pci.c @@ -504,7 +504,7 @@ iop13xx_pci_abort(unsigned long addr, unsigned int fsr, struct pt_regs *regs) /* Scan an IOP13XX PCI bus. nr selects which ATU we use. */ -struct pci_bus *iop13xx_scan_bus(int nr, struct pci_sys_data *sys) +struct pci_bus * __devinit iop13xx_scan_bus(int nr, struct pci_sys_data *sys) { int which_atu; struct pci_bus *bus = NULL; diff --git a/arch/arm/mach-ks8695/include/mach/memory.h b/arch/arm/mach-ks8695/include/mach/memory.h index f7e1b9b..95e731a 100644 --- a/arch/arm/mach-ks8695/include/mach/memory.h +++ b/arch/arm/mach-ks8695/include/mach/memory.h @@ -34,7 +34,8 @@ extern struct bus_type platform_bus_type; #define __arch_dma_to_virt(dev, x) ({ (void *) (is_lbus_device(dev) ? \ __phys_to_virt(x) : __bus_to_virt(x)); }) #define __arch_virt_to_dma(dev, x) ({ is_lbus_device(dev) ? \ - (dma_addr_t)__virt_to_phys(x) : (dma_addr_t)__virt_to_bus(x); }) + (dma_addr_t)__virt_to_phys((unsigned long)x) \ + : (dma_addr_t)__virt_to_bus(x); }) #define __arch_pfn_to_dma(dev, pfn) \ ({ dma_addr_t __dma = __pfn_to_phys(pfn); \ if (!is_lbus_device(dev)) \ diff --git a/arch/arm/mach-mv78xx0/addr-map.c b/arch/arm/mach-mv78xx0/addr-map.c index 343c435..26e9876 100644 --- a/arch/arm/mach-mv78xx0/addr-map.c +++ b/arch/arm/mach-mv78xx0/addr-map.c @@ -54,7 +54,7 @@ static void __init __iomem *win_cfg_base(const struct orion_addr_map_cfg *cfg, i /* * Description of the windows needed by the platform code */ -static struct __initdata orion_addr_map_cfg addr_map_cfg = { +static struct orion_addr_map_cfg addr_map_cfg __initdata = { .num_wins = 14, .remappable_wins = 8, .win_cfg_base = win_cfg_base, diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c index 131cd48..d0cb485 100644 --- a/arch/arm/mach-mv78xx0/common.c +++ b/arch/arm/mach-mv78xx0/common.c @@ -336,7 +336,7 @@ void __init mv78xx0_init_early(void) orion_time_set_base(TIMER_VIRT_BASE); } -static void mv78xx0_timer_init(void) +static void __init_refok mv78xx0_timer_init(void) { orion_time_init(BRIDGE_VIRT_BASE, BRIDGE_INT_TIMER1_CLR, IRQ_MV78XX0_TIMER_1, get_tclk()); diff --git a/arch/arm/mach-omap1/devices.c b/arch/arm/mach-omap1/devices.c index 726c02c..d3fec92 100644 --- a/arch/arm/mach-omap1/devices.c +++ b/arch/arm/mach-omap1/devices.c @@ -231,7 +231,7 @@ void __init omap1_init_mmc(struct omap_mmc_platform_data **mmc_data, omap_mmc_add("mmci-omap", i, base, size, irq, rx_req, tx_req, mmc_data[i]); - }; + } } #endif diff --git a/arch/arm/mach-omap2/board-flash.c b/arch/arm/mach-omap2/board-flash.c index 0cabe61..e642acf 100644 --- a/arch/arm/mach-omap2/board-flash.c +++ b/arch/arm/mach-omap2/board-flash.c @@ -218,7 +218,7 @@ void __init board_flash_init(struct flash_partitions partition_info[], if (onenandcs > GPMC_CS_NUM) onenandcs = cs; break; - }; + } cs++; } diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 68ff8d5..79d4820 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -461,7 +461,7 @@ static void __init beagle_opp_init(void) mpu_dev = omap_device_get_by_hwmod_name("mpu"); iva_dev = omap_device_get_by_hwmod_name("iva"); - if (!mpu_dev || !iva_dev) { + if (IS_ERR(mpu_dev) || IS_ERR(iva_dev)) { pr_err("%s: Aiee.. no mpu/dsp devices? %p %p\n", __func__, mpu_dev, iva_dev); return; diff --git a/arch/arm/mach-omap2/board-omap3evm.c b/arch/arm/mach-omap2/board-omap3evm.c index c64e565..184ef21 100644 --- a/arch/arm/mach-omap2/board-omap3evm.c +++ b/arch/arm/mach-omap2/board-omap3evm.c @@ -88,11 +88,10 @@ enum { static u8 omap3_evm_version; -u8 get_omap3_evm_rev(void) +static u8 get_omap3_evm_rev(void) { return omap3_evm_version; } -EXPORT_SYMBOL(get_omap3_evm_rev); static void __init omap3_evm_get_revision(void) { diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c index c7f3d02..731235e 100644 --- a/arch/arm/mach-omap2/board-omap3stalker.c +++ b/arch/arm/mach-omap2/board-omap3stalker.c @@ -48,11 +48,6 @@ #include <video/omap-panel-tfp410.h> #include <linux/platform_data/spi-omap2-mcspi.h> -#include <linux/input/matrix_keypad.h> -#include <linux/spi/spi.h> -#include <linux/interrupt.h> -#include <linux/smsc911x.h> -#include <linux/i2c/at24.h> #include "sdram-micron-mt46h32m32lf-6.h" #include "mux.h" diff --git a/arch/arm/mach-omap2/board-omap4panda.c b/arch/arm/mach-omap2/board-omap4panda.c index 645e857..f62b903 100644 --- a/arch/arm/mach-omap2/board-omap4panda.c +++ b/arch/arm/mach-omap2/board-omap4panda.c @@ -247,8 +247,7 @@ static struct platform_device omap_vwlan_device = { }; static struct wl12xx_platform_data omap_panda_wlan_data __initdata = { - /* PANDA ref clock is 38.4 MHz */ - .board_ref_clock = 2, + .board_ref_clock = WL12XX_REFCLOCK_38, /* 38.4 MHz */ }; static struct twl6040_codec_data twl6040_codec = { diff --git a/arch/arm/mach-omap2/board-rx51-peripherals.c b/arch/arm/mach-omap2/board-rx51-peripherals.c index ed85fb8..020e03c 100644 --- a/arch/arm/mach-omap2/board-rx51-peripherals.c +++ b/arch/arm/mach-omap2/board-rx51-peripherals.c @@ -748,7 +748,7 @@ static struct radio_si4713_platform_data rx51_si4713_data __initdata_or_module = .subdev_board_info = &rx51_si4713_board_info, }; -static struct platform_device rx51_si4713_dev = { +static struct platform_device rx51_si4713_dev __initdata_or_module = { .name = "radio-si4713", .id = -1, .dev = { diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c index 6bcc107..a935f31 100644 --- a/arch/arm/mach-omap2/board-zoom-peripherals.c +++ b/arch/arm/mach-omap2/board-zoom-peripherals.c @@ -194,8 +194,7 @@ static struct platform_device omap_vwlan_device = { }; static struct wl12xx_platform_data omap_zoom_wlan_data __initdata = { - /* ZOOM ref clock is 26 MHz */ - .board_ref_clock = 1, + .board_ref_clock = WL12XX_REFCLOCK_26, /* 26 MHz */ }; static struct omap2_hsmmc_info mmc[] = { diff --git a/arch/arm/mach-omap2/clkt_clksel.c b/arch/arm/mach-omap2/clkt_clksel.c index eaed390..3ff2211 100644 --- a/arch/arm/mach-omap2/clkt_clksel.c +++ b/arch/arm/mach-omap2/clkt_clksel.c @@ -382,7 +382,7 @@ void omap2_init_clksel_parent(struct clk *clk) __clk_get_name(parent) : "NULL")); clk_reparent(clk, clks->parent); - }; + } found = 1; } } diff --git a/arch/arm/mach-omap2/clock33xx_data.c b/arch/arm/mach-omap2/clock33xx_data.c index b87b88c..114ab4b 100644 --- a/arch/arm/mach-omap2/clock33xx_data.c +++ b/arch/arm/mach-omap2/clock33xx_data.c @@ -1035,6 +1035,8 @@ static struct omap_clk am33xx_clks[] = { CLK(NULL, "pruss_ocp_gclk", &pruss_ocp_gclk, CK_AM33XX), CLK("davinci-mcasp.0", NULL, &mcasp0_fck, CK_AM33XX), CLK("davinci-mcasp.1", NULL, &mcasp1_fck, CK_AM33XX), + CLK(NULL, "mcasp0_fck", &mcasp0_fck, CK_AM33XX), + CLK(NULL, "mcasp1_fck", &mcasp1_fck, CK_AM33XX), CLK("NULL", "mmc2_fck", &mmc2_fck, CK_AM33XX), CLK(NULL, "mmu_fck", &mmu_fck, CK_AM33XX), CLK(NULL, "smartreflex0_fck", &smartreflex0_fck, CK_AM33XX), diff --git a/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c b/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c index 9a7792a..70294f5 100644 --- a/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c +++ b/arch/arm/mach-omap2/clockdomain2xxx_3xxx.c @@ -183,17 +183,6 @@ static int omap2_clkdm_clk_enable(struct clockdomain *clkdm) if (!clkdm->clktrctrl_mask) return 0; - /* - * The CLKDM_MISSING_IDLE_REPORTING flag documentation has - * more details on the unpleasant problem this is working - * around - */ - if (clkdm->flags & CLKDM_MISSING_IDLE_REPORTING && - !(clkdm->flags & CLKDM_CAN_FORCE_SLEEP)) { - _enable_hwsup(clkdm); - return 0; - } - hwsup = omap2_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs, clkdm->clktrctrl_mask); @@ -217,17 +206,6 @@ static int omap2_clkdm_clk_disable(struct clockdomain *clkdm) if (!clkdm->clktrctrl_mask) return 0; - /* - * The CLKDM_MISSING_IDLE_REPORTING flag documentation has - * more details on the unpleasant problem this is working - * around - */ - if ((clkdm->flags & CLKDM_MISSING_IDLE_REPORTING) && - (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)) { - omap3_clkdm_wakeup(clkdm); - return 0; - } - hwsup = omap2_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs, clkdm->clktrctrl_mask); @@ -269,6 +247,17 @@ static int omap3xxx_clkdm_clk_enable(struct clockdomain *clkdm) if (!clkdm->clktrctrl_mask) return 0; + /* + * The CLKDM_MISSING_IDLE_REPORTING flag documentation has + * more details on the unpleasant problem this is working + * around + */ + if ((clkdm->flags & CLKDM_MISSING_IDLE_REPORTING) && + (clkdm->flags & CLKDM_CAN_FORCE_WAKEUP)) { + omap3_clkdm_wakeup(clkdm); + return 0; + } + hwsup = omap2_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs, clkdm->clktrctrl_mask); @@ -292,6 +281,17 @@ static int omap3xxx_clkdm_clk_disable(struct clockdomain *clkdm) if (!clkdm->clktrctrl_mask) return 0; + /* + * The CLKDM_MISSING_IDLE_REPORTING flag documentation has + * more details on the unpleasant problem this is working + * around + */ + if (clkdm->flags & CLKDM_MISSING_IDLE_REPORTING && + !(clkdm->flags & CLKDM_CAN_FORCE_SLEEP)) { + _enable_hwsup(clkdm); + return 0; + } + hwsup = omap2_cm_is_clkdm_in_hwsup(clkdm->pwrdm.ptr->prcm_offs, clkdm->clktrctrl_mask); diff --git a/arch/arm/mach-omap2/display.c b/arch/arm/mach-omap2/display.c index 7012068..a51ece4 100644 --- a/arch/arm/mach-omap2/display.c +++ b/arch/arm/mach-omap2/display.c @@ -221,7 +221,7 @@ static struct platform_device *create_dss_pdev(const char *pdev_name, ohs[0] = oh; od = omap_device_alloc(pdev, ohs, 1, NULL, 0); - if (!od) { + if (IS_ERR(od)) { pr_err("Could not alloc omap_device for %s\n", pdev_name); r = -ENOMEM; goto err; diff --git a/arch/arm/mach-omap2/gpmc.c b/arch/arm/mach-omap2/gpmc.c index 8ab1e1b..5ac5cf3 100644 --- a/arch/arm/mach-omap2/gpmc.c +++ b/arch/arm/mach-omap2/gpmc.c @@ -838,7 +838,7 @@ static int gpmc_setup_irq(void) return request_irq(gpmc_irq, gpmc_handle_irq, 0, "gpmc", NULL); } -static __exit int gpmc_free_irq(void) +static __devexit int gpmc_free_irq(void) { int i; @@ -944,7 +944,7 @@ static __devinit int gpmc_probe(struct platform_device *pdev) return 0; } -static __exit int gpmc_remove(struct platform_device *pdev) +static __devexit int gpmc_remove(struct platform_device *pdev) { gpmc_free_irq(); gpmc_mem_exit(); diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c index 03ebf47..4d3a632 100644 --- a/arch/arm/mach-omap2/hsmmc.c +++ b/arch/arm/mach-omap2/hsmmc.c @@ -523,7 +523,7 @@ static void __init omap_hsmmc_init_one(struct omap2_hsmmc_info *hsmmcinfo, dev_set_name(&pdev->dev, "%s.%d", pdev->name, pdev->id); od = omap_device_alloc(pdev, ohs, 1, NULL, 0); - if (!od) { + if (IS_ERR(od)) { pr_err("Could not allocate od for %s\n", name); goto put_pdev; } diff --git a/arch/arm/mach-omap2/mux.c b/arch/arm/mach-omap2/mux.c index 9fe6829..701e17c 100644 --- a/arch/arm/mach-omap2/mux.c +++ b/arch/arm/mach-omap2/mux.c @@ -486,7 +486,7 @@ void omap_hwmod_mux(struct omap_hwmod_mux_info *hmux, u8 state) default: /* Nothing to be done */ break; - }; + } if (val >= 0) { omap_mux_write(pad->partition, val, diff --git a/arch/arm/mach-omap2/omap-secure.c b/arch/arm/mach-omap2/omap-secure.c index a004cb9..e089e4d 100644 --- a/arch/arm/mach-omap2/omap-secure.c +++ b/arch/arm/mach-omap2/omap-secure.c @@ -61,8 +61,8 @@ int __init omap_secure_ram_reserve_memblock(void) { u32 size = OMAP_SECURE_RAM_STORAGE; - size = ALIGN(size, SZ_1M); - omap_secure_memblock_base = arm_memblock_steal(size, SZ_1M); + size = ALIGN(size, SECTION_SIZE); + omap_secure_memblock_base = arm_memblock_steal(size, SECTION_SIZE); return 0; } diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index 299ca28..b969ab1 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -1698,6 +1698,29 @@ static bool _are_all_hardreset_lines_asserted(struct omap_hwmod *oh) } /** + * _are_any_hardreset_lines_asserted - return true if any part of @oh is + * hard-reset + * @oh: struct omap_hwmod * + * + * If any hardreset lines associated with @oh are asserted, then + * return true. Otherwise, if no hardreset lines associated with @oh + * are asserted, or if @oh has no hardreset lines, then return false. + * This function is used to avoid executing some parts of the IP block + * enable/disable sequence if any hardreset line is set. + */ +static bool _are_any_hardreset_lines_asserted(struct omap_hwmod *oh) +{ + int rst_cnt = 0; + int i; + + for (i = 0; i < oh->rst_lines_cnt && rst_cnt == 0; i++) + if (_read_hardreset(oh, oh->rst_lines[i].name) > 0) + rst_cnt++; + + return (rst_cnt) ? true : false; +} + +/** * _omap4_disable_module - enable CLKCTRL modulemode on OMAP4 * @oh: struct omap_hwmod * * @@ -1715,7 +1738,7 @@ static int _omap4_disable_module(struct omap_hwmod *oh) * Since integration code might still be doing something, only * disable if all lines are under hardreset. */ - if (!_are_all_hardreset_lines_asserted(oh)) + if (_are_any_hardreset_lines_asserted(oh)) return 0; pr_debug("omap_hwmod: %s: %s\n", oh->name, __func__); @@ -1749,12 +1772,12 @@ static int _am33xx_disable_module(struct omap_hwmod *oh) pr_debug("omap_hwmod: %s: %s\n", oh->name, __func__); + if (_are_any_hardreset_lines_asserted(oh)) + return 0; + am33xx_cm_module_disable(oh->clkdm->cm_inst, oh->clkdm->clkdm_offs, oh->prcm.omap4.clkctrl_offs); - if (_are_all_hardreset_lines_asserted(oh)) - return 0; - v = _am33xx_wait_target_disable(oh); if (v) pr_warn("omap_hwmod: %s: _wait_target_disable failed\n", diff --git a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c index 35dcdb6..bd9220e 100644 --- a/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_2xxx_ipblock_data.c @@ -219,7 +219,7 @@ struct omap_hwmod omap2xxx_l4_wkup_hwmod = { /* MPU */ static struct omap_hwmod_irq_info omap2xxx_mpu_irqs[] = { - { .name = "pmu", .irq = 3 }, + { .name = "pmu", .irq = 3 + OMAP_INTC_START }, { .irq = -1 } }; diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 2857772..f67b7ee 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -94,7 +94,7 @@ static struct omap_hwmod omap3xxx_l4_sec_hwmod = { /* MPU */ static struct omap_hwmod_irq_info omap3xxx_mpu_irqs[] = { - { .name = "pmu", .irq = 3 }, + { .name = "pmu", .irq = 3 + OMAP_INTC_START }, { .irq = -1 } }; @@ -3683,6 +3683,7 @@ static struct omap_hwmod_ocp_if *am35xx_hwmod_ocp_ifs[] __initdata = { &omap3xxx_l4_core__usb_tll_hs, &omap3xxx_l4_core__es3plus_mmc1, &omap3xxx_l4_core__es3plus_mmc2, + &omap3xxx_l4_core__hdq1w, &am35xx_mdio__l3, &am35xx_l4_core__mdio, &am35xx_emac__l3, @@ -3737,7 +3738,7 @@ int __init omap3xxx_hwmod_init(void) } else { WARN(1, "OMAP3 hwmod family init: unknown chip type\n"); return -EINVAL; - }; + } r = omap_hwmod_register_links(h); if (r < 0) @@ -3754,7 +3755,7 @@ int __init omap3xxx_hwmod_init(void) rev == OMAP3430_REV_ES3_0 || rev == OMAP3430_REV_ES3_1 || rev == OMAP3430_REV_ES3_1_2) { h = omap3430es2plus_hwmod_ocp_ifs; - }; + } if (h) { r = omap_hwmod_register_links(h); @@ -3769,7 +3770,7 @@ int __init omap3xxx_hwmod_init(void) } else if (rev == OMAP3430_REV_ES3_0 || rev == OMAP3430_REV_ES3_1 || rev == OMAP3430_REV_ES3_1_2) { h = omap3430_es3plus_hwmod_ocp_ifs; - }; + } if (h) r = omap_hwmod_register_links(h); diff --git a/arch/arm/mach-omap2/opp.c b/arch/arm/mach-omap2/opp.c index 45ad7f7..58e16ae 100644 --- a/arch/arm/mach-omap2/opp.c +++ b/arch/arm/mach-omap2/opp.c @@ -18,6 +18,7 @@ */ #include <linux/module.h> #include <linux/opp.h> +#include <linux/cpu.h> #include <plat/omap_device.h> @@ -62,13 +63,23 @@ int __init omap_init_opp_table(struct omap_opp_def *opp_def, __func__, i); return -EINVAL; } - oh = omap_hwmod_lookup(opp_def->hwmod_name); - if (!oh || !oh->od) { - pr_debug("%s: no hwmod or odev for %s, [%d] cannot add OPPs.\n", - __func__, opp_def->hwmod_name, i); - continue; + + if (!strncmp(opp_def->hwmod_name, "mpu", 3)) { + /* + * All current OMAPs share voltage rail and + * clock source, so CPU0 is used to represent + * the MPU-SS. + */ + dev = get_cpu_device(0); + } else { + oh = omap_hwmod_lookup(opp_def->hwmod_name); + if (!oh || !oh->od) { + pr_debug("%s: no hwmod or odev for %s, [%d] cannot add OPPs.\n", + __func__, opp_def->hwmod_name, i); + continue; + } + dev = &oh->od->pdev->dev; } - dev = &oh->od->pdev->dev; r = opp_add(dev, opp_def->freq, opp_def->u_volt); if (r) { diff --git a/arch/arm/mach-omap2/pm-debug.c b/arch/arm/mach-omap2/pm-debug.c index 3e1345f..46092cd 100644 --- a/arch/arm/mach-omap2/pm-debug.c +++ b/arch/arm/mach-omap2/pm-debug.c @@ -168,7 +168,7 @@ static int pm_dbg_open(struct inode *inode, struct file *file) default: return single_open(file, pm_dbg_show_timers, &inode->i_private); - }; + } } static const struct file_operations debug_fops = { diff --git a/arch/arm/mach-omap2/pm.c b/arch/arm/mach-omap2/pm.c index abefbc4..ea61c32 100644 --- a/arch/arm/mach-omap2/pm.c +++ b/arch/arm/mach-omap2/pm.c @@ -16,6 +16,7 @@ #include <linux/opp.h> #include <linux/export.h> #include <linux/suspend.h> +#include <linux/cpu.h> #include <asm/system_misc.h> @@ -169,7 +170,15 @@ static int __init omap2_set_init_voltage(char *vdd_name, char *clk_name, goto exit; } - dev = omap_device_get_by_hwmod_name(oh_name); + if (!strncmp(oh_name, "mpu", 3)) + /* + * All current OMAPs share voltage rail and clock + * source, so CPU0 is used to represent the MPU-SS. + */ + dev = get_cpu_device(0); + else + dev = omap_device_get_by_hwmod_name(oh_name); + if (IS_ERR(dev)) { pr_err("%s: Unable to get dev pointer for hwmod %s\n", __func__, oh_name); @@ -177,7 +186,7 @@ static int __init omap2_set_init_voltage(char *vdd_name, char *clk_name, } voltdm = voltdm_lookup(vdd_name); - if (IS_ERR(voltdm)) { + if (!voltdm) { pr_err("%s: unable to get vdd pointer for vdd_%s\n", __func__, vdd_name); goto exit; diff --git a/arch/arm/mach-omap2/sr_device.c b/arch/arm/mach-omap2/sr_device.c index cbeae56..f8217a5 100644 --- a/arch/arm/mach-omap2/sr_device.c +++ b/arch/arm/mach-omap2/sr_device.c @@ -122,7 +122,7 @@ static int __init sr_dev_init(struct omap_hwmod *oh, void *user) sr_data->senp_mod = 0x1; sr_data->voltdm = voltdm_lookup(sr_dev_attr->sensor_voltdm_name); - if (IS_ERR(sr_data->voltdm)) { + if (!sr_data->voltdm) { pr_err("%s: Unable to get voltage domain pointer for VDD %s\n", __func__, sr_dev_attr->sensor_voltdm_name); goto exit; diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index 8847d6e..44f9aa7 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -378,7 +378,7 @@ static void __init realtime_counter_init(void) return; } sys_clk = clk_get(NULL, "sys_clkin_ck"); - if (!sys_clk) { + if (IS_ERR(sys_clk)) { pr_err("%s: failed to get system clock handle\n", __func__); iounmap(base); return; diff --git a/arch/arm/mach-omap2/twl-common.c b/arch/arm/mach-omap2/twl-common.c index 45f7741..3f5eacc 100644 --- a/arch/arm/mach-omap2/twl-common.c +++ b/arch/arm/mach-omap2/twl-common.c @@ -158,7 +158,7 @@ static struct regulator_init_data omap3_vpll2_idata = { }; static struct regulator_consumer_supply omap3_vdd1_supply[] = { - REGULATOR_SUPPLY("vcc", "mpu.0"), + REGULATOR_SUPPLY("vcc", "cpu0"), }; static struct regulator_consumer_supply omap3_vdd2_supply[] = { diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c index fc3afc7..a103c8f 100644 --- a/arch/arm/mach-pxa/cm-x2xx.c +++ b/arch/arm/mach-pxa/cm-x2xx.c @@ -22,6 +22,7 @@ #include <asm/mach/map.h> #include <mach/pxa25x.h> +#undef GPIO24_SSP1_SFRM #include <mach/pxa27x.h> #include <mach/audio.h> #include <linux/platform_data/video-pxafb.h> diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c index 997e6da..32e0d79 100644 --- a/arch/arm/mach-pxa/palmte2.c +++ b/arch/arm/mach-pxa/palmte2.c @@ -105,6 +105,7 @@ static struct pxamci_platform_data palmte2_mci_platform_data = { .gpio_power = GPIO_NR_PALMTE2_SD_POWER, }; +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) /****************************************************************************** * GPIO keys ******************************************************************************/ @@ -132,6 +133,7 @@ static struct platform_device palmte2_pxa_keys = { .platform_data = &palmte2_pxa_keys_data, }, }; +#endif /****************************************************************************** * Backlight diff --git a/arch/arm/mach-pxa/sharpsl_pm.c b/arch/arm/mach-pxa/sharpsl_pm.c index 5a406f7..ec55c57 100644 --- a/arch/arm/mach-pxa/sharpsl_pm.c +++ b/arch/arm/mach-pxa/sharpsl_pm.c @@ -55,7 +55,6 @@ #ifdef CONFIG_PM static int sharpsl_off_charge_battery(void); static int sharpsl_check_battery_voltage(void); -static int sharpsl_fatal_check(void); #endif static int sharpsl_check_battery_temp(void); static int sharpsl_ac_check(void); @@ -686,53 +685,6 @@ static int corgi_pxa_pm_enter(suspend_state_t state) return 0; } -/* - * Check for fatal battery errors - * Fatal returns -1 - */ -static int sharpsl_fatal_check(void) -{ - int buff[5], temp, i, acin; - - dev_dbg(sharpsl_pm.dev, "sharpsl_fatal_check entered\n"); - - /* Check AC-Adapter */ - acin = sharpsl_pm.machinfo->read_devdata(SHARPSL_STATUS_ACIN); - - if (acin && (sharpsl_pm.charge_mode == CHRG_ON)) { - sharpsl_pm.machinfo->charge(0); - udelay(100); - sharpsl_pm.machinfo->discharge(1); /* enable discharge */ - mdelay(SHARPSL_WAIT_DISCHARGE_ON); - } - - if (sharpsl_pm.machinfo->discharge1) - sharpsl_pm.machinfo->discharge1(1); - - /* Check battery : check inserting battery ? */ - for (i = 0; i < 5; i++) { - buff[i] = sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT); - mdelay(SHARPSL_CHECK_BATTERY_WAIT_TIME_VOLT); - } - - if (sharpsl_pm.machinfo->discharge1) - sharpsl_pm.machinfo->discharge1(0); - - if (acin && (sharpsl_pm.charge_mode == CHRG_ON)) { - udelay(100); - sharpsl_pm.machinfo->charge(1); - sharpsl_pm.machinfo->discharge(0); - } - - temp = get_select_val(buff); - dev_dbg(sharpsl_pm.dev, "sharpsl_fatal_check: acin: %d, discharge voltage: %d, no discharge: %ld\n", acin, temp, sharpsl_pm.machinfo->read_devdata(SHARPSL_BATT_VOLT)); - - if ((acin && (temp < sharpsl_pm.machinfo->fatal_acin_volt)) || - (!acin && (temp < sharpsl_pm.machinfo->fatal_noacin_volt))) - return -1; - return 0; -} - static int sharpsl_off_charge_error(void) { dev_err(sharpsl_pm.dev, "Offline Charger: Error occurred.\n"); diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c index 392412c..c773e4d 100644 --- a/arch/arm/mach-pxa/viper.c +++ b/arch/arm/mach-pxa/viper.c @@ -768,8 +768,7 @@ static unsigned long viper_tpm; static int __init viper_tpm_setup(char *str) { - strict_strtoul(str, 10, &viper_tpm); - return 1; + return strict_strtoul(str, 10, &viper_tpm) >= 0; } __setup("tpm=", viper_tpm_setup); diff --git a/arch/arm/mach-rpc/ecard.c b/arch/arm/mach-rpc/ecard.c index b91bc87..fcb1d59 100644 --- a/arch/arm/mach-rpc/ecard.c +++ b/arch/arm/mach-rpc/ecard.c @@ -960,7 +960,9 @@ static int __init ecard_probe(int slot, unsigned irq, card_type_t type) *ecp = ec; slot_to_expcard[slot] = ec; - device_register(&ec->dev); + rc = device_register(&ec->dev); + if (rc) + goto nodev; return 0; diff --git a/arch/arm/mach-s3c24xx/irq-s3c2416.c b/arch/arm/mach-s3c24xx/irq-s3c2416.c index 23ec973..ff141b0 100644 --- a/arch/arm/mach-s3c24xx/irq-s3c2416.c +++ b/arch/arm/mach-s3c24xx/irq-s3c2416.c @@ -232,7 +232,7 @@ struct irq_chip s3c2416_irq_second = { /* IRQ initialisation code */ -static int __init s3c2416_add_sub(unsigned int base, +static int s3c2416_add_sub(unsigned int base, void (*demux)(unsigned int, struct irq_desc *), struct irq_chip *chip, @@ -251,7 +251,7 @@ static int __init s3c2416_add_sub(unsigned int base, return 0; } -static void __init s3c2416_irq_add_second(void) +static void s3c2416_irq_add_second(void) { unsigned long pend; unsigned long last; @@ -287,7 +287,7 @@ static void __init s3c2416_irq_add_second(void) } } -static int __init s3c2416_irq_add(struct device *dev, +static int s3c2416_irq_add(struct device *dev, struct subsys_interface *sif) { printk(KERN_INFO "S3C2416: IRQ Support\n"); diff --git a/arch/arm/mach-s3c24xx/irq-s3c2443.c b/arch/arm/mach-s3c24xx/irq-s3c2443.c index ac2829f..5e69109 100644 --- a/arch/arm/mach-s3c24xx/irq-s3c2443.c +++ b/arch/arm/mach-s3c24xx/irq-s3c2443.c @@ -222,7 +222,7 @@ static struct irq_chip s3c2443_irq_cam = { /* IRQ initialisation code */ -static int __init s3c2443_add_sub(unsigned int base, +static int s3c2443_add_sub(unsigned int base, void (*demux)(unsigned int, struct irq_desc *), struct irq_chip *chip, @@ -241,7 +241,7 @@ static int __init s3c2443_add_sub(unsigned int base, return 0; } -static int __init s3c2443_irq_add(struct device *dev, +static int s3c2443_irq_add(struct device *dev, struct subsys_interface *sif) { printk("S3C2443: IRQ Support\n"); diff --git a/arch/arm/mach-s3c24xx/simtec-usb.c b/arch/arm/mach-s3c24xx/simtec-usb.c index 17f8356..ddf7a3c 100644 --- a/arch/arm/mach-s3c24xx/simtec-usb.c +++ b/arch/arm/mach-s3c24xx/simtec-usb.c @@ -104,7 +104,7 @@ static struct s3c2410_hcd_info usb_simtec_info __initdata = { }; -int usb_simtec_init(void) +int __init usb_simtec_init(void) { int ret; diff --git a/arch/arm/mach-sa1100/assabet.c b/arch/arm/mach-sa1100/assabet.c index e1ccda6..6a7ad3c 100644 --- a/arch/arm/mach-sa1100/assabet.c +++ b/arch/arm/mach-sa1100/assabet.c @@ -388,7 +388,7 @@ static void __init map_sa1100_gpio_regs( void ) */ static void __init get_assabet_scr(void) { - unsigned long scr, i; + unsigned long uninitialized_var(scr), i; GPDR |= 0x3fc; /* Configure GPIO 9:2 as outputs */ GPSR = 0x3fc; /* Write 0xFF to GPIO 9:2 */ diff --git a/arch/arm/mach-sa1100/include/mach/SA-1111.h b/arch/arm/mach-sa1100/include/mach/SA-1111.h deleted file mode 100644 index c38f609..0000000 --- a/arch/arm/mach-sa1100/include/mach/SA-1111.h +++ /dev/null @@ -1,5 +0,0 @@ -/* - * Moved to new location - */ -#warning using old SA-1111.h - update to <asm/hardware/sa1111.h> -#include <asm/hardware/sa1111.h> diff --git a/arch/arm/mach-sa1100/include/mach/lart.h b/arch/arm/mach-sa1100/include/mach/lart.h deleted file mode 100644 index 8a5482d..0000000 --- a/arch/arm/mach-sa1100/include/mach/lart.h +++ /dev/null @@ -1,13 +0,0 @@ -#ifndef _INCLUDE_LART_H -#define _INCLUDE_LART_H - -#define LART_GPIO_ETH0 GPIO_GPIO0 -#define LART_IRQ_ETH0 IRQ_GPIO0 - -#define LART_GPIO_IDE GPIO_GPIO1 -#define LART_IRQ_IDE IRQ_GPIO1 - -#define LART_GPIO_UCB1200 GPIO_GPIO18 -#define LART_IRQ_UCB1200 IRQ_GPIO18 - -#endif diff --git a/arch/arm/mach-shark/pci.c b/arch/arm/mach-shark/pci.c index b8b4ab3..6d91a91 100644 --- a/arch/arm/mach-shark/pci.c +++ b/arch/arm/mach-shark/pci.c @@ -41,7 +41,7 @@ static struct hw_pci shark_pci __initdata = { static int __init shark_pci_init(void) { if (!machine_is_shark()) - return; + return -ENODEV; pcibios_min_io = 0x6000; pcibios_min_mem = 0x50000000; diff --git a/arch/arm/mach-shmobile/include/mach/common.h b/arch/arm/mach-shmobile/include/mach/common.h index ed77ab8..d47e215 100644 --- a/arch/arm/mach-shmobile/include/mach/common.h +++ b/arch/arm/mach-shmobile/include/mach/common.h @@ -100,7 +100,7 @@ static inline int shmobile_cpu_is_dead(unsigned int cpu) { return 1; } extern void shmobile_smp_init_cpus(unsigned int ncores); -static inline void shmobile_init_late(void) +static inline void __init shmobile_init_late(void) { shmobile_suspend_init(); shmobile_cpuidle_init(); diff --git a/arch/arm/mach-shmobile/smp-emev2.c b/arch/arm/mach-shmobile/smp-emev2.c index f978c5d..f674562 100644 --- a/arch/arm/mach-shmobile/smp-emev2.c +++ b/arch/arm/mach-shmobile/smp-emev2.c @@ -100,7 +100,7 @@ static int __cpuinit emev2_boot_secondary(unsigned int cpu, struct task_struct * /* Tell ROM loader about our vector (in headsmp.S) */ emev2_set_boot_vector(__pa(shmobile_secondary_vector)); - gic_raise_softirq(cpumask_of(cpu), 1); + gic_raise_softirq(cpumask_of(cpu), 0); return 0; } diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig index 5f3c03b..11680c5 100644 --- a/arch/arm/mach-tegra/Kconfig +++ b/arch/arm/mach-tegra/Kconfig @@ -16,7 +16,7 @@ config ARCH_TEGRA_2x_SOC select ARM_ERRATA_742230 select ARM_ERRATA_751472 select ARM_ERRATA_754327 - select ARM_ERRATA_764369 + select ARM_ERRATA_764369 if SMP select PL310_ERRATA_727915 if CACHE_L2X0 select PL310_ERRATA_769419 if CACHE_L2X0 select CPU_FREQ_TABLE if CPU_FREQ @@ -37,7 +37,7 @@ config ARCH_TEGRA_3x_SOC select ARM_ERRATA_743622 select ARM_ERRATA_751472 select ARM_ERRATA_754322 - select ARM_ERRATA_764369 + select ARM_ERRATA_764369 if SMP select PL310_ERRATA_769419 if CACHE_L2X0 select CPU_FREQ_TABLE if CPU_FREQ help @@ -57,8 +57,6 @@ config TEGRA_AHB which controls AHB bus master arbitration and some perfomance parameters(priority, prefech size). -comment "Tegra board type" - choice prompt "Default low-level debug console UART" default TEGRA_DEBUG_UART_NONE diff --git a/arch/arm/mach-ux500/Kconfig b/arch/arm/mach-ux500/Kconfig index c77c86c4..5848206 100644 --- a/arch/arm/mach-ux500/Kconfig +++ b/arch/arm/mach-ux500/Kconfig @@ -5,9 +5,9 @@ config UX500_SOC_COMMON default y select ARM_GIC select HAS_MTU - select PL310_ERRATA_753970 + select PL310_ERRATA_753970 if CACHE_PL310 select ARM_ERRATA_754322 - select ARM_ERRATA_764369 + select ARM_ERRATA_764369 if SMP select CACHE_L2X0 select PINCTRL select PINCTRL_NOMADIK diff --git a/arch/arm/mach-vt8500/include/mach/uncompress.h b/arch/arm/mach-vt8500/include/mach/uncompress.h index bb9e2d2..e6e81fd 100644 --- a/arch/arm/mach-vt8500/include/mach/uncompress.h +++ b/arch/arm/mach-vt8500/include/mach/uncompress.h @@ -15,15 +15,15 @@ * */ -#define UART0_PHYS 0xd8200000 -#include <asm/io.h> +#define UART0_PHYS 0xd8200000 +#define UART0_ADDR(x) *(volatile unsigned char *)(UART0_PHYS + x) static void putc(const char c) { - while (readb(UART0_PHYS + 0x1c) & 0x2) + while (UART0_ADDR(0x1c) & 0x2) /* Tx busy, wait and poll */; - writeb(c, UART0_PHYS); + UART0_ADDR(0) = c; } static void flush(void) diff --git a/arch/arm/mach-vt8500/vt8500.c b/arch/arm/mach-vt8500/vt8500.c index 587ea95..8d3871f 100644 --- a/arch/arm/mach-vt8500/vt8500.c +++ b/arch/arm/mach-vt8500/vt8500.c @@ -77,8 +77,11 @@ static void vt8500_power_off(void) void __init vt8500_init(void) { - struct device_node *np, *fb; + struct device_node *np; +#if defined(CONFIG_FB_VT8500) || defined(CONFIG_FB_WM8505) + struct device_node *fb; void __iomem *gpio_base; +#endif #ifdef CONFIG_FB_VT8500 fb = of_find_compatible_node(NULL, NULL, "via,vt8500-fb"); diff --git a/arch/arm/mm/alignment.c b/arch/arm/mm/alignment.c index 9107231..b9f60eb 100644 --- a/arch/arm/mm/alignment.c +++ b/arch/arm/mm/alignment.c @@ -699,7 +699,6 @@ do_alignment_t32_to_handler(unsigned long *pinstr, struct pt_regs *regs, unsigned long instr = *pinstr; u16 tinst1 = (instr >> 16) & 0xffff; u16 tinst2 = instr & 0xffff; - poffset->un = 0; switch (tinst1 & 0xffe0) { /* A6.3.5 Load/Store multiple */ @@ -854,9 +853,10 @@ do_alignment(unsigned long addr, unsigned int fsr, struct pt_regs *regs) break; case 0x08000000: /* ldm or stm, or thumb-2 32bit instruction */ - if (thumb2_32b) + if (thumb2_32b) { + offset.un = 0; handler = do_alignment_t32_to_handler(&instr, regs, &offset); - else + } else handler = do_alignment_ldmstm; break; diff --git a/arch/arm/mm/cache-l2x0.c b/arch/arm/mm/cache-l2x0.c index 577baf7..8a97e64 100644 --- a/arch/arm/mm/cache-l2x0.c +++ b/arch/arm/mm/cache-l2x0.c @@ -368,14 +368,18 @@ void __init l2x0_init(void __iomem *base, u32 aux_val, u32 aux_mask) /* l2x0 controller is disabled */ writel_relaxed(aux, l2x0_base + L2X0_AUX_CTRL); - l2x0_saved_regs.aux_ctrl = aux; - l2x0_inv_all(); /* enable L2X0 */ writel_relaxed(1, l2x0_base + L2X0_CTRL); } + /* Re-read it in case some bits are reserved. */ + aux = readl_relaxed(l2x0_base + L2X0_AUX_CTRL); + + /* Save the value for resuming. */ + l2x0_saved_regs.aux_ctrl = aux; + outer_cache.inv_range = l2x0_inv_range; outer_cache.clean_range = l2x0_clean_range; outer_cache.flush_range = l2x0_flush_range; diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S index 39e3fb3..3b17227 100644 --- a/arch/arm/mm/cache-v7.S +++ b/arch/arm/mm/cache-v7.S @@ -211,6 +211,9 @@ ENTRY(v7_coherent_user_range) * isn't mapped, fail with -EFAULT. */ 9001: +#ifdef CONFIG_ARM_ERRATA_775420 + dsb +#endif mov r0, #-EFAULT mov pc, lr UNWIND(.fnend ) diff --git a/arch/arm/mm/init.c b/arch/arm/mm/init.c index 9aec41f..ad722f1 100644 --- a/arch/arm/mm/init.c +++ b/arch/arm/mm/init.c @@ -324,7 +324,7 @@ phys_addr_t __init arm_memblock_steal(phys_addr_t size, phys_addr_t align) BUG_ON(!arm_memblock_steal_permitted); - phys = memblock_alloc(size, align); + phys = memblock_alloc_base(size, align, MEMBLOCK_ALLOC_ANYWHERE); memblock_free(phys, size); memblock_remove(phys, size); diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c index 9d869f9..5dcc2fd 100644 --- a/arch/arm/mm/ioremap.c +++ b/arch/arm/mm/ioremap.c @@ -248,6 +248,7 @@ void __iomem * __arm_ioremap_pfn_caller(unsigned long pfn, if (!area) return NULL; addr = (unsigned long)area->addr; + area->phys_addr = __pfn_to_phys(pfn); #if !defined(CONFIG_SMP) && !defined(CONFIG_ARM_LPAE) if (DOMAIN_IO == 0 && diff --git a/arch/arm/plat-omap/Kconfig b/arch/arm/plat-omap/Kconfig index ca83a76..c9d1c36 100644 --- a/arch/arm/plat-omap/Kconfig +++ b/arch/arm/plat-omap/Kconfig @@ -43,11 +43,13 @@ config OMAP_DEBUG_DEVICES config OMAP_DEBUG_LEDS def_bool y if NEW_LEDS + select LEDS_CLASS depends on OMAP_DEBUG_DEVICES config POWER_AVS_OMAP bool "AVS(Adaptive Voltage Scaling) support for OMAP IP versions 1&2" depends on POWER_AVS && (ARCH_OMAP3 || ARCH_OMAP4) && PM + select POWER_SUPPLY help Say Y to enable AVS(Adaptive Voltage Scaling) support on OMAP containing the version 1 or diff --git a/arch/arm/plat-omap/counter_32k.c b/arch/arm/plat-omap/counter_32k.c index 2e826f1..87ba8dd 100644 --- a/arch/arm/plat-omap/counter_32k.c +++ b/arch/arm/plat-omap/counter_32k.c @@ -52,22 +52,29 @@ static u32 notrace omap_32k_read_sched_clock(void) * nsecs and adds to a monotonically increasing timespec. */ static struct timespec persistent_ts; -static cycles_t cycles, last_cycles; +static cycles_t cycles; static unsigned int persistent_mult, persistent_shift; +static DEFINE_SPINLOCK(read_persistent_clock_lock); + static void omap_read_persistent_clock(struct timespec *ts) { unsigned long long nsecs; - cycles_t delta; - struct timespec *tsp = &persistent_ts; + cycles_t last_cycles; + unsigned long flags; + + spin_lock_irqsave(&read_persistent_clock_lock, flags); last_cycles = cycles; cycles = sync32k_cnt_reg ? __raw_readl(sync32k_cnt_reg) : 0; - delta = cycles - last_cycles; - nsecs = clocksource_cyc2ns(delta, persistent_mult, persistent_shift); + nsecs = clocksource_cyc2ns(cycles - last_cycles, + persistent_mult, persistent_shift); + + timespec_add_ns(&persistent_ts, nsecs); + + *ts = persistent_ts; - timespec_add_ns(tsp, nsecs); - *ts = *tsp; + spin_unlock_irqrestore(&read_persistent_clock_lock, flags); } /** diff --git a/arch/arm/plat-omap/omap-pm-noop.c b/arch/arm/plat-omap/omap-pm-noop.c index 9f64133..9722f41 100644 --- a/arch/arm/plat-omap/omap-pm-noop.c +++ b/arch/arm/plat-omap/omap-pm-noop.c @@ -38,7 +38,7 @@ int omap_pm_set_max_mpu_wakeup_lat(struct device *dev, long t) if (!dev || t < -1) { WARN(1, "OMAP PM: %s: invalid parameter(s)", __func__); return -EINVAL; - }; + } if (t == -1) pr_debug("OMAP PM: remove max MPU wakeup latency constraint: dev %s\n", @@ -67,7 +67,7 @@ int omap_pm_set_min_bus_tput(struct device *dev, u8 agent_id, unsigned long r) agent_id != OCP_TARGET_AGENT)) { WARN(1, "OMAP PM: %s: invalid parameter(s)", __func__); return -EINVAL; - }; + } if (r == 0) pr_debug("OMAP PM: remove min bus tput constraint: dev %s for agent_id %d\n", @@ -93,7 +93,7 @@ int omap_pm_set_max_dev_wakeup_lat(struct device *req_dev, struct device *dev, if (!req_dev || !dev || t < -1) { WARN(1, "OMAP PM: %s: invalid parameter(s)", __func__); return -EINVAL; - }; + } if (t == -1) pr_debug("OMAP PM: remove max device latency constraint: dev %s\n", @@ -123,7 +123,7 @@ int omap_pm_set_max_sdma_lat(struct device *dev, long t) if (!dev || t < -1) { WARN(1, "OMAP PM: %s: invalid parameter(s)", __func__); return -EINVAL; - }; + } if (t == -1) pr_debug("OMAP PM: remove max DMA latency constraint: dev %s\n", diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c index cee85a5..7a7d1f2 100644 --- a/arch/arm/plat-omap/omap_device.c +++ b/arch/arm/plat-omap/omap_device.c @@ -725,7 +725,7 @@ struct platform_device __init *omap_device_build_ss(const char *pdev_name, int p dev_set_name(&pdev->dev, "%s", pdev->name); od = omap_device_alloc(pdev, ohs, oh_cnt, pm_lats, pm_lats_cnt); - if (!od) + if (IS_ERR(od)) goto odbs_exit1; ret = platform_device_add_data(pdev, pdata, pdata_len); diff --git a/arch/arm/plat-versatile/fpga-irq.c b/arch/arm/plat-versatile/fpga-irq.c index 6e70d03..091ae10 100644 --- a/arch/arm/plat-versatile/fpga-irq.c +++ b/arch/arm/plat-versatile/fpga-irq.c @@ -5,6 +5,8 @@ #include <linux/io.h> #include <linux/irqdomain.h> #include <linux/module.h> +#include <linux/of.h> +#include <linux/of_address.h> #include <asm/exception.h> #include <asm/mach/irq.h> @@ -14,11 +16,17 @@ #define IRQ_RAW_STATUS 0x04 #define IRQ_ENABLE_SET 0x08 #define IRQ_ENABLE_CLEAR 0x0c +#define INT_SOFT_SET 0x10 +#define INT_SOFT_CLEAR 0x14 +#define FIQ_STATUS 0x20 +#define FIQ_RAW_STATUS 0x24 +#define FIQ_ENABLE 0x28 +#define FIQ_ENABLE_SET 0x28 +#define FIQ_ENABLE_CLEAR 0x2C /** * struct fpga_irq_data - irq data container for the FPGA IRQ controller * @base: memory offset in virtual memory - * @irq_start: first IRQ number handled by this instance * @chip: chip container for this instance * @domain: IRQ domain for this instance * @valid: mask for valid IRQs on this controller @@ -26,7 +34,6 @@ */ struct fpga_irq_data { void __iomem *base; - unsigned int irq_start; struct irq_chip chip; u32 valid; struct irq_domain *domain; @@ -125,34 +132,79 @@ static struct irq_domain_ops fpga_irqdomain_ops = { .xlate = irq_domain_xlate_onetwocell, }; -void __init fpga_irq_init(void __iomem *base, const char *name, int irq_start, - int parent_irq, u32 valid, struct device_node *node) -{ +static __init struct fpga_irq_data * +fpga_irq_prep_struct(void __iomem *base, const char *name, u32 valid) { struct fpga_irq_data *f; if (fpga_irq_id >= ARRAY_SIZE(fpga_irq_devices)) { printk(KERN_ERR "%s: too few FPGA IRQ controllers, increase CONFIG_PLAT_VERSATILE_FPGA_IRQ_NR\n", __func__); - return; + return NULL; } - f = &fpga_irq_devices[fpga_irq_id]; f->base = base; - f->irq_start = irq_start; f->chip.name = name; f->chip.irq_ack = fpga_irq_mask; f->chip.irq_mask = fpga_irq_mask; f->chip.irq_unmask = fpga_irq_unmask; f->valid = valid; + fpga_irq_id++; + + return f; +} + +void __init fpga_irq_init(void __iomem *base, const char *name, int irq_start, + int parent_irq, u32 valid, struct device_node *node) +{ + struct fpga_irq_data *f; + + f = fpga_irq_prep_struct(base, name, valid); + if (!f) + return; if (parent_irq != -1) { irq_set_handler_data(parent_irq, f); irq_set_chained_handler(parent_irq, fpga_irq_handle); } - f->domain = irq_domain_add_legacy(node, fls(valid), f->irq_start, 0, + f->domain = irq_domain_add_legacy(node, fls(valid), irq_start, 0, &fpga_irqdomain_ops, f); pr_info("FPGA IRQ chip %d \"%s\" @ %p, %u irqs\n", fpga_irq_id, name, base, f->used_irqs); +} - fpga_irq_id++; +#ifdef CONFIG_OF +int __init fpga_irq_of_init(struct device_node *node, + struct device_node *parent) +{ + struct fpga_irq_data *f; + void __iomem *base; + u32 clear_mask; + u32 valid_mask; + + if (WARN_ON(!node)) + return -ENODEV; + + base = of_iomap(node, 0); + WARN(!base, "unable to map fpga irq registers\n"); + + if (of_property_read_u32(node, "clear-mask", &clear_mask)) + clear_mask = 0; + + if (of_property_read_u32(node, "valid-mask", &valid_mask)) + valid_mask = 0; + + f = fpga_irq_prep_struct(base, node->name, valid_mask); + if (!f) + return -ENOMEM; + + writel(clear_mask, base + IRQ_ENABLE_CLEAR); + writel(clear_mask, base + FIQ_ENABLE_CLEAR); + + f->domain = irq_domain_add_linear(node, fls(valid_mask), &fpga_irqdomain_ops, f); + f->used_irqs = hweight32(valid_mask); + + pr_info("FPGA IRQ chip %d \"%s\" @ %p, %u irqs\n", + fpga_irq_id, node->name, base, f->used_irqs); + return 0; } +#endif diff --git a/arch/arm/plat-versatile/include/plat/fpga-irq.h b/arch/arm/plat-versatile/include/plat/fpga-irq.h index 91bcfb6..1fac965 100644 --- a/arch/arm/plat-versatile/include/plat/fpga-irq.h +++ b/arch/arm/plat-versatile/include/plat/fpga-irq.h @@ -7,5 +7,7 @@ struct pt_regs; void fpga_handle_irq(struct pt_regs *regs); void fpga_irq_init(void __iomem *, const char *, int, int, u32, struct device_node *node); +int fpga_irq_of_init(struct device_node *node, + struct device_node *parent); #endif diff --git a/arch/m68k/include/asm/cacheflush_no.h b/arch/m68k/include/asm/cacheflush_no.h index 7cafb53..d2b3935 100644 --- a/arch/m68k/include/asm/cacheflush_no.h +++ b/arch/m68k/include/asm/cacheflush_no.h @@ -34,10 +34,9 @@ static inline void __clear_cache_all(void) { #ifdef CACHE_INVALIDATE __asm__ __volatile__ ( - "movel %0, %%d0\n\t" - "movec %%d0, %%CACR\n\t" + "movec %0, %%CACR\n\t" "nop\n\t" - : : "i" (CACHE_INVALIDATE) : "d0" ); + : : "r" (CACHE_INVALIDATE) ); #endif } @@ -58,10 +57,9 @@ static inline void __flush_icache_all(void) { #ifdef CACHE_INVALIDATEI __asm__ __volatile__ ( - "movel %0, %%d0\n\t" - "movec %%d0, %%CACR\n\t" + "movec %0, %%CACR\n\t" "nop\n\t" - : : "i" (CACHE_INVALIDATEI) : "d0" ); + : : "r" (CACHE_INVALIDATEI) ); #endif } @@ -72,19 +70,18 @@ static inline void __flush_dcache_all(void) #endif #ifdef CACHE_INVALIDATED __asm__ __volatile__ ( - "movel %0, %%d0\n\t" - "movec %%d0, %%CACR\n\t" + "movec %0, %%CACR\n\t" "nop\n\t" - : : "i" (CACHE_INVALIDATED) : "d0" ); + : : "r" (CACHE_INVALIDATED) ); #else - /* Flush the wrtite buffer */ + /* Flush the write buffer */ __asm__ __volatile__ ( "nop" ); #endif } /* * Push cache entries at supplied address. We want to write back any dirty - * data and the invalidate the cache lines associated with this address. + * data and then invalidate the cache lines associated with this address. */ static inline void cache_push(unsigned long paddr, int len) { diff --git a/arch/m68k/include/asm/m5206sim.h b/arch/m68k/include/asm/m5206sim.h index 6972236..4cf864f 100644 --- a/arch/m68k/include/asm/m5206sim.h +++ b/arch/m68k/include/asm/m5206sim.h @@ -21,33 +21,33 @@ /* * Define the 5206 SIM register set addresses. */ -#define MCFSIM_SIMR 0x03 /* SIM Config reg (r/w) */ -#define MCFSIM_ICR1 0x14 /* Intr Ctrl reg 1 (r/w) */ -#define MCFSIM_ICR2 0x15 /* Intr Ctrl reg 2 (r/w) */ -#define MCFSIM_ICR3 0x16 /* Intr Ctrl reg 3 (r/w) */ -#define MCFSIM_ICR4 0x17 /* Intr Ctrl reg 4 (r/w) */ -#define MCFSIM_ICR5 0x18 /* Intr Ctrl reg 5 (r/w) */ -#define MCFSIM_ICR6 0x19 /* Intr Ctrl reg 6 (r/w) */ -#define MCFSIM_ICR7 0x1a /* Intr Ctrl reg 7 (r/w) */ -#define MCFSIM_ICR8 0x1b /* Intr Ctrl reg 8 (r/w) */ -#define MCFSIM_ICR9 0x1c /* Intr Ctrl reg 9 (r/w) */ -#define MCFSIM_ICR10 0x1d /* Intr Ctrl reg 10 (r/w) */ -#define MCFSIM_ICR11 0x1e /* Intr Ctrl reg 11 (r/w) */ -#define MCFSIM_ICR12 0x1f /* Intr Ctrl reg 12 (r/w) */ -#define MCFSIM_ICR13 0x20 /* Intr Ctrl reg 13 (r/w) */ +#define MCFSIM_SIMR (MCF_MBAR + 0x03) /* SIM Config reg */ +#define MCFSIM_ICR1 (MCF_MBAR + 0x14) /* Intr Ctrl reg 1 */ +#define MCFSIM_ICR2 (MCF_MBAR + 0x15) /* Intr Ctrl reg 2 */ +#define MCFSIM_ICR3 (MCF_MBAR + 0x16) /* Intr Ctrl reg 3 */ +#define MCFSIM_ICR4 (MCF_MBAR + 0x17) /* Intr Ctrl reg 4 */ +#define MCFSIM_ICR5 (MCF_MBAR + 0x18) /* Intr Ctrl reg 5 */ +#define MCFSIM_ICR6 (MCF_MBAR + 0x19) /* Intr Ctrl reg 6 */ +#define MCFSIM_ICR7 (MCF_MBAR + 0x1a) /* Intr Ctrl reg 7 */ +#define MCFSIM_ICR8 (MCF_MBAR + 0x1b) /* Intr Ctrl reg 8 */ +#define MCFSIM_ICR9 (MCF_MBAR + 0x1c) /* Intr Ctrl reg 9 */ +#define MCFSIM_ICR10 (MCF_MBAR + 0x1d) /* Intr Ctrl reg 10 */ +#define MCFSIM_ICR11 (MCF_MBAR + 0x1e) /* Intr Ctrl reg 11 */ +#define MCFSIM_ICR12 (MCF_MBAR + 0x1f) /* Intr Ctrl reg 12 */ +#define MCFSIM_ICR13 (MCF_MBAR + 0x20) /* Intr Ctrl reg 13 */ #ifdef CONFIG_M5206e -#define MCFSIM_ICR14 0x21 /* Intr Ctrl reg 14 (r/w) */ -#define MCFSIM_ICR15 0x22 /* Intr Ctrl reg 15 (r/w) */ +#define MCFSIM_ICR14 (MCF_MBAR + 0x21) /* Intr Ctrl reg 14 */ +#define MCFSIM_ICR15 (MCF_MBAR + 0x22) /* Intr Ctrl reg 15 */ #endif -#define MCFSIM_IMR 0x36 /* Interrupt Mask reg (r/w) */ -#define MCFSIM_IPR 0x3a /* Interrupt Pend reg (r/w) */ +#define MCFSIM_IMR (MCF_MBAR + 0x36) /* Interrupt Mask */ +#define MCFSIM_IPR (MCF_MBAR + 0x3a) /* Interrupt Pending */ -#define MCFSIM_RSR 0x40 /* Reset Status reg (r/w) */ -#define MCFSIM_SYPCR 0x41 /* System Protection reg (r/w)*/ +#define MCFSIM_RSR (MCF_MBAR + 0x40) /* Reset Status */ +#define MCFSIM_SYPCR (MCF_MBAR + 0x41) /* System Protection */ -#define MCFSIM_SWIVR 0x42 /* SW Watchdog intr reg (r/w) */ -#define MCFSIM_SWSR 0x43 /* SW Watchdog service (r/w) */ +#define MCFSIM_SWIVR (MCF_MBAR + 0x42) /* SW Watchdog intr */ +#define MCFSIM_SWSR (MCF_MBAR + 0x43) /* SW Watchdog srv */ #define MCFSIM_DCRR (MCF_MBAR + 0x46) /* DRAM Refresh reg (r/w) */ #define MCFSIM_DCTR (MCF_MBAR + 0x4a) /* DRAM Timing reg (r/w) */ @@ -58,36 +58,36 @@ #define MCFSIM_DMR1 (MCF_MBAR + 0x5c) /* DRAM 1 Mask reg (r/w) */ #define MCFSIM_DCR1 (MCF_MBAR + 0x63) /* DRAM 1 Control reg (r/w) */ -#define MCFSIM_CSAR0 0x64 /* CS 0 Address 0 reg (r/w) */ -#define MCFSIM_CSMR0 0x68 /* CS 0 Mask 0 reg (r/w) */ -#define MCFSIM_CSCR0 0x6e /* CS 0 Control reg (r/w) */ -#define MCFSIM_CSAR1 0x70 /* CS 1 Address reg (r/w) */ -#define MCFSIM_CSMR1 0x74 /* CS 1 Mask reg (r/w) */ -#define MCFSIM_CSCR1 0x7a /* CS 1 Control reg (r/w) */ -#define MCFSIM_CSAR2 0x7c /* CS 2 Address reg (r/w) */ -#define MCFSIM_CSMR2 0x80 /* CS 2 Mask reg (r/w) */ -#define MCFSIM_CSCR2 0x86 /* CS 2 Control reg (r/w) */ -#define MCFSIM_CSAR3 0x88 /* CS 3 Address reg (r/w) */ -#define MCFSIM_CSMR3 0x8c /* CS 3 Mask reg (r/w) */ -#define MCFSIM_CSCR3 0x92 /* CS 3 Control reg (r/w) */ -#define MCFSIM_CSAR4 0x94 /* CS 4 Address reg (r/w) */ -#define MCFSIM_CSMR4 0x98 /* CS 4 Mask reg (r/w) */ -#define MCFSIM_CSCR4 0x9e /* CS 4 Control reg (r/w) */ -#define MCFSIM_CSAR5 0xa0 /* CS 5 Address reg (r/w) */ -#define MCFSIM_CSMR5 0xa4 /* CS 5 Mask reg (r/w) */ -#define MCFSIM_CSCR5 0xaa /* CS 5 Control reg (r/w) */ -#define MCFSIM_CSAR6 0xac /* CS 6 Address reg (r/w) */ -#define MCFSIM_CSMR6 0xb0 /* CS 6 Mask reg (r/w) */ -#define MCFSIM_CSCR6 0xb6 /* CS 6 Control reg (r/w) */ -#define MCFSIM_CSAR7 0xb8 /* CS 7 Address reg (r/w) */ -#define MCFSIM_CSMR7 0xbc /* CS 7 Mask reg (r/w) */ -#define MCFSIM_CSCR7 0xc2 /* CS 7 Control reg (r/w) */ -#define MCFSIM_DMCR 0xc6 /* Default control */ +#define MCFSIM_CSAR0 (MCF_MBAR + 0x64) /* CS 0 Address reg */ +#define MCFSIM_CSMR0 (MCF_MBAR + 0x68) /* CS 0 Mask reg */ +#define MCFSIM_CSCR0 (MCF_MBAR + 0x6e) /* CS 0 Control reg */ +#define MCFSIM_CSAR1 (MCF_MBAR + 0x70) /* CS 1 Address reg */ +#define MCFSIM_CSMR1 (MCF_MBAR + 0x74) /* CS 1 Mask reg */ +#define MCFSIM_CSCR1 (MCF_MBAR + 0x7a) /* CS 1 Control reg */ +#define MCFSIM_CSAR2 (MCF_MBAR + 0x7c) /* CS 2 Address reg */ +#define MCFSIM_CSMR2 (MCF_MBAR + 0x80) /* CS 2 Mask reg */ +#define MCFSIM_CSCR2 (MCF_MBAR + 0x86) /* CS 2 Control reg */ +#define MCFSIM_CSAR3 (MCF_MBAR + 0x88) /* CS 3 Address reg */ +#define MCFSIM_CSMR3 (MCF_MBAR + 0x8c) /* CS 3 Mask reg */ +#define MCFSIM_CSCR3 (MCF_MBAR + 0x92) /* CS 3 Control reg */ +#define MCFSIM_CSAR4 (MCF_MBAR + 0x94) /* CS 4 Address reg */ +#define MCFSIM_CSMR4 (MCF_MBAR + 0x98) /* CS 4 Mask reg */ +#define MCFSIM_CSCR4 (MCF_MBAR + 0x9e) /* CS 4 Control reg */ +#define MCFSIM_CSAR5 (MCF_MBAR + 0xa0) /* CS 5 Address reg */ +#define MCFSIM_CSMR5 (MCF_MBAR + 0xa4) /* CS 5 Mask reg */ +#define MCFSIM_CSCR5 (MCF_MBAR + 0xaa) /* CS 5 Control reg */ +#define MCFSIM_CSAR6 (MCF_MBAR + 0xac) /* CS 6 Address reg */ +#define MCFSIM_CSMR6 (MCF_MBAR + 0xb0) /* CS 6 Mask reg */ +#define MCFSIM_CSCR6 (MCF_MBAR + 0xb6) /* CS 6 Control reg */ +#define MCFSIM_CSAR7 (MCF_MBAR + 0xb8) /* CS 7 Address reg */ +#define MCFSIM_CSMR7 (MCF_MBAR + 0xbc) /* CS 7 Mask reg */ +#define MCFSIM_CSCR7 (MCF_MBAR + 0xc2) /* CS 7 Control reg */ +#define MCFSIM_DMCR (MCF_MBAR + 0xc6) /* Default control */ #ifdef CONFIG_M5206e -#define MCFSIM_PAR 0xca /* Pin Assignment reg (r/w) */ +#define MCFSIM_PAR (MCF_MBAR + 0xca) /* Pin Assignment */ #else -#define MCFSIM_PAR 0xcb /* Pin Assignment reg (r/w) */ +#define MCFSIM_PAR (MCF_MBAR + 0xcb) /* Pin Assignment */ #endif #define MCFTIMER_BASE1 (MCF_MBAR + 0x100) /* Base of TIMER1 */ diff --git a/arch/m68k/include/asm/m523xsim.h b/arch/m68k/include/asm/m523xsim.h index 91d3abc..5e06b4e 100644 --- a/arch/m68k/include/asm/m523xsim.h +++ b/arch/m68k/include/asm/m523xsim.h @@ -176,21 +176,29 @@ /* * Generic GPIO support */ -#define MCFGPIO_PODR MCFGPIO_PODR_ADDR -#define MCFGPIO_PDDR MCFGPIO_PDDR_ADDR -#define MCFGPIO_PPDR MCFGPIO_PPDSDR_ADDR -#define MCFGPIO_SETR MCFGPIO_PPDSDR_ADDR -#define MCFGPIO_CLRR MCFGPIO_PCLRR_ADDR +#define MCFGPIO_PODR MCFGPIO_PODR_ADDR +#define MCFGPIO_PDDR MCFGPIO_PDDR_ADDR +#define MCFGPIO_PPDR MCFGPIO_PPDSDR_ADDR +#define MCFGPIO_SETR MCFGPIO_PPDSDR_ADDR +#define MCFGPIO_CLRR MCFGPIO_PCLRR_ADDR -#define MCFGPIO_PIN_MAX 107 -#define MCFGPIO_IRQ_MAX 8 -#define MCFGPIO_IRQ_VECBASE MCFINT_VECBASE +#define MCFGPIO_PIN_MAX 107 +#define MCFGPIO_IRQ_MAX 8 +#define MCFGPIO_IRQ_VECBASE MCFINT_VECBASE /* * Pin Assignment */ +#define MCFGPIO_PAR_AD (MCF_IPSBAR + 0x100040) +#define MCFGPIO_PAR_BUSCTL (MCF_IPSBAR + 0x100042) +#define MCFGPIO_PAR_BS (MCF_IPSBAR + 0x100044) +#define MCFGPIO_PAR_CS (MCF_IPSBAR + 0x100045) +#define MCFGPIO_PAR_SDRAM (MCF_IPSBAR + 0x100046) +#define MCFGPIO_PAR_FECI2C (MCF_IPSBAR + 0x100047) +#define MCFGPIO_PAR_UART (MCF_IPSBAR + 0x100048) #define MCFGPIO_PAR_QSPI (MCF_IPSBAR + 0x10004A) #define MCFGPIO_PAR_TIMER (MCF_IPSBAR + 0x10004C) +#define MCFGPIO_PAR_ETPU (MCF_IPSBAR + 0x10004E) /* * DMA unit base addresses. diff --git a/arch/m68k/include/asm/m5249sim.h b/arch/m68k/include/asm/m5249sim.h index 7f0c2c3..fdf45e6 100644 --- a/arch/m68k/include/asm/m5249sim.h +++ b/arch/m68k/include/asm/m5249sim.h @@ -25,41 +25,41 @@ /* * Define the 5249 SIM register set addresses. */ -#define MCFSIM_RSR 0x00 /* Reset Status reg (r/w) */ -#define MCFSIM_SYPCR 0x01 /* System Protection reg (r/w)*/ -#define MCFSIM_SWIVR 0x02 /* SW Watchdog intr reg (r/w) */ -#define MCFSIM_SWSR 0x03 /* SW Watchdog service (r/w) */ -#define MCFSIM_PAR 0x04 /* Pin Assignment reg (r/w) */ -#define MCFSIM_IRQPAR 0x06 /* Interrupt Assignment reg (r/w) */ -#define MCFSIM_MPARK 0x0C /* BUS Master Control Reg*/ -#define MCFSIM_IPR 0x40 /* Interrupt Pend reg (r/w) */ -#define MCFSIM_IMR 0x44 /* Interrupt Mask reg (r/w) */ -#define MCFSIM_AVR 0x4b /* Autovector Ctrl reg (r/w) */ -#define MCFSIM_ICR0 0x4c /* Intr Ctrl reg 0 (r/w) */ -#define MCFSIM_ICR1 0x4d /* Intr Ctrl reg 1 (r/w) */ -#define MCFSIM_ICR2 0x4e /* Intr Ctrl reg 2 (r/w) */ -#define MCFSIM_ICR3 0x4f /* Intr Ctrl reg 3 (r/w) */ -#define MCFSIM_ICR4 0x50 /* Intr Ctrl reg 4 (r/w) */ -#define MCFSIM_ICR5 0x51 /* Intr Ctrl reg 5 (r/w) */ -#define MCFSIM_ICR6 0x52 /* Intr Ctrl reg 6 (r/w) */ -#define MCFSIM_ICR7 0x53 /* Intr Ctrl reg 7 (r/w) */ -#define MCFSIM_ICR8 0x54 /* Intr Ctrl reg 8 (r/w) */ -#define MCFSIM_ICR9 0x55 /* Intr Ctrl reg 9 (r/w) */ -#define MCFSIM_ICR10 0x56 /* Intr Ctrl reg 10 (r/w) */ -#define MCFSIM_ICR11 0x57 /* Intr Ctrl reg 11 (r/w) */ - -#define MCFSIM_CSAR0 0x80 /* CS 0 Address 0 reg (r/w) */ -#define MCFSIM_CSMR0 0x84 /* CS 0 Mask 0 reg (r/w) */ -#define MCFSIM_CSCR0 0x8a /* CS 0 Control reg (r/w) */ -#define MCFSIM_CSAR1 0x8c /* CS 1 Address reg (r/w) */ -#define MCFSIM_CSMR1 0x90 /* CS 1 Mask reg (r/w) */ -#define MCFSIM_CSCR1 0x96 /* CS 1 Control reg (r/w) */ -#define MCFSIM_CSAR2 0x98 /* CS 2 Address reg (r/w) */ -#define MCFSIM_CSMR2 0x9c /* CS 2 Mask reg (r/w) */ -#define MCFSIM_CSCR2 0xa2 /* CS 2 Control reg (r/w) */ -#define MCFSIM_CSAR3 0xa4 /* CS 3 Address reg (r/w) */ -#define MCFSIM_CSMR3 0xa8 /* CS 3 Mask reg (r/w) */ -#define MCFSIM_CSCR3 0xae /* CS 3 Control reg (r/w) */ +#define MCFSIM_RSR (MCF_MBAR + 0x00) /* Reset Status */ +#define MCFSIM_SYPCR (MCF_MBAR + 0x01) /* System Protection */ +#define MCFSIM_SWIVR (MCF_MBAR + 0x02) /* SW Watchdog intr */ +#define MCFSIM_SWSR (MCF_MBAR + 0x03) /* SW Watchdog srv */ +#define MCFSIM_PAR (MCF_MBAR + 0x04) /* Pin Assignment */ +#define MCFSIM_IRQPAR (MCF_MBAR + 0x06) /* Intr Assignment */ +#define MCFSIM_MPARK (MCF_MBAR + 0x0C) /* BUS Master Ctrl */ +#define MCFSIM_IPR (MCF_MBAR + 0x40) /* Interrupt Pending */ +#define MCFSIM_IMR (MCF_MBAR + 0x44) /* Interrupt Mask */ +#define MCFSIM_AVR (MCF_MBAR + 0x4b) /* Autovector Ctrl */ +#define MCFSIM_ICR0 (MCF_MBAR + 0x4c) /* Intr Ctrl reg 0 */ +#define MCFSIM_ICR1 (MCF_MBAR + 0x4d) /* Intr Ctrl reg 1 */ +#define MCFSIM_ICR2 (MCF_MBAR + 0x4e) /* Intr Ctrl reg 2 */ +#define MCFSIM_ICR3 (MCF_MBAR + 0x4f) /* Intr Ctrl reg 3 */ +#define MCFSIM_ICR4 (MCF_MBAR + 0x50) /* Intr Ctrl reg 4 */ +#define MCFSIM_ICR5 (MCF_MBAR + 0x51) /* Intr Ctrl reg 5 */ +#define MCFSIM_ICR6 (MCF_MBAR + 0x52) /* Intr Ctrl reg 6 */ +#define MCFSIM_ICR7 (MCF_MBAR + 0x53) /* Intr Ctrl reg 7 */ +#define MCFSIM_ICR8 (MCF_MBAR + 0x54) /* Intr Ctrl reg 8 */ +#define MCFSIM_ICR9 (MCF_MBAR + 0x55) /* Intr Ctrl reg 9 */ +#define MCFSIM_ICR10 (MCF_MBAR + 0x56) /* Intr Ctrl reg 10 */ +#define MCFSIM_ICR11 (MCF_MBAR + 0x57) /* Intr Ctrl reg 11 */ + +#define MCFSIM_CSAR0 (MCF_MBAR + 0x80) /* CS 0 Address reg */ +#define MCFSIM_CSMR0 (MCF_MBAR + 0x84) /* CS 0 Mask reg */ +#define MCFSIM_CSCR0 (MCF_MBAR + 0x8a) /* CS 0 Control reg */ +#define MCFSIM_CSAR1 (MCF_MBAR + 0x8c) /* CS 1 Address reg */ +#define MCFSIM_CSMR1 (MCF_MBAR + 0x90) /* CS 1 Mask reg */ +#define MCFSIM_CSCR1 (MCF_MBAR + 0x96) /* CS 1 Control reg */ +#define MCFSIM_CSAR2 (MCF_MBAR + 0x98) /* CS 2 Address reg */ +#define MCFSIM_CSMR2 (MCF_MBAR + 0x9c) /* CS 2 Mask reg */ +#define MCFSIM_CSCR2 (MCF_MBAR + 0xa2) /* CS 2 Control reg */ +#define MCFSIM_CSAR3 (MCF_MBAR + 0xa4) /* CS 3 Address reg */ +#define MCFSIM_CSMR3 (MCF_MBAR + 0xa8) /* CS 3 Mask reg */ +#define MCFSIM_CSCR3 (MCF_MBAR + 0xae) /* CS 3 Control reg */ #define MCFSIM_DCR (MCF_MBAR + 0x100) /* DRAM Control */ #define MCFSIM_DACR0 (MCF_MBAR + 0x108) /* DRAM 0 Addr/Ctrl */ @@ -134,23 +134,23 @@ #define MCFSIM2_GPIO1ENABLE (MCF_MBAR2 + 0x0B8) /* GPIO1 enabled */ #define MCFSIM2_GPIO1FUNC (MCF_MBAR2 + 0x0BC) /* GPIO1 function */ -#define MCFSIM2_GPIOINTSTAT 0xc0 /* GPIO interrupt status */ -#define MCFSIM2_GPIOINTCLEAR 0xc0 /* GPIO interrupt clear */ -#define MCFSIM2_GPIOINTENABLE 0xc4 /* GPIO interrupt enable */ +#define MCFSIM2_GPIOINTSTAT (MCF_MBAR2 + 0xc0) /* GPIO intr status */ +#define MCFSIM2_GPIOINTCLEAR (MCF_MBAR2 + 0xc0) /* GPIO intr clear */ +#define MCFSIM2_GPIOINTENABLE (MCF_MBAR2 + 0xc4) /* GPIO intr enable */ -#define MCFSIM2_INTLEVEL1 0x140 /* Interrupt level reg 1 */ -#define MCFSIM2_INTLEVEL2 0x144 /* Interrupt level reg 2 */ -#define MCFSIM2_INTLEVEL3 0x148 /* Interrupt level reg 3 */ -#define MCFSIM2_INTLEVEL4 0x14c /* Interrupt level reg 4 */ -#define MCFSIM2_INTLEVEL5 0x150 /* Interrupt level reg 5 */ -#define MCFSIM2_INTLEVEL6 0x154 /* Interrupt level reg 6 */ -#define MCFSIM2_INTLEVEL7 0x158 /* Interrupt level reg 7 */ -#define MCFSIM2_INTLEVEL8 0x15c /* Interrupt level reg 8 */ +#define MCFSIM2_INTLEVEL1 (MCF_MBAR2 + 0x140) /* Intr level reg 1 */ +#define MCFSIM2_INTLEVEL2 (MCF_MBAR2 + 0x144) /* Intr level reg 2 */ +#define MCFSIM2_INTLEVEL3 (MCF_MBAR2 + 0x148) /* Intr level reg 3 */ +#define MCFSIM2_INTLEVEL4 (MCF_MBAR2 + 0x14c) /* Intr level reg 4 */ +#define MCFSIM2_INTLEVEL5 (MCF_MBAR2 + 0x150) /* Intr level reg 5 */ +#define MCFSIM2_INTLEVEL6 (MCF_MBAR2 + 0x154) /* Intr level reg 6 */ +#define MCFSIM2_INTLEVEL7 (MCF_MBAR2 + 0x158) /* Intr level reg 7 */ +#define MCFSIM2_INTLEVEL8 (MCF_MBAR2 + 0x15c) /* Intr level reg 8 */ -#define MCFSIM2_DMAROUTE 0x188 /* DMA routing */ +#define MCFSIM2_DMAROUTE (MCF_MBAR2 + 0x188) /* DMA routing */ -#define MCFSIM2_IDECONFIG1 0x18c /* IDEconfig1 */ -#define MCFSIM2_IDECONFIG2 0x190 /* IDEconfig2 */ +#define MCFSIM2_IDECONFIG1 (MCF_MBAR2 + 0x18c) /* IDEconfig1 */ +#define MCFSIM2_IDECONFIG2 (MCF_MBAR2 + 0x190) /* IDEconfig2 */ /* * Define the base interrupt for the second interrupt controller. diff --git a/arch/m68k/include/asm/m525xsim.h b/arch/m68k/include/asm/m525xsim.h index 6da24f6..acab61c 100644 --- a/arch/m68k/include/asm/m525xsim.h +++ b/arch/m68k/include/asm/m525xsim.h @@ -26,41 +26,41 @@ /* * Define the 525x SIM register set addresses. */ -#define MCFSIM_RSR 0x00 /* Reset Status reg (r/w) */ -#define MCFSIM_SYPCR 0x01 /* System Protection reg (r/w)*/ -#define MCFSIM_SWIVR 0x02 /* SW Watchdog intr reg (r/w) */ -#define MCFSIM_SWSR 0x03 /* SW Watchdog service (r/w) */ -#define MCFSIM_MPARK 0x0C /* BUS Master Control Reg*/ -#define MCFSIM_IPR 0x40 /* Interrupt Pend reg (r/w) */ -#define MCFSIM_IMR 0x44 /* Interrupt Mask reg (r/w) */ -#define MCFSIM_ICR0 0x4c /* Intr Ctrl reg 0 (r/w) */ -#define MCFSIM_ICR1 0x4d /* Intr Ctrl reg 1 (r/w) */ -#define MCFSIM_ICR2 0x4e /* Intr Ctrl reg 2 (r/w) */ -#define MCFSIM_ICR3 0x4f /* Intr Ctrl reg 3 (r/w) */ -#define MCFSIM_ICR4 0x50 /* Intr Ctrl reg 4 (r/w) */ -#define MCFSIM_ICR5 0x51 /* Intr Ctrl reg 5 (r/w) */ -#define MCFSIM_ICR6 0x52 /* Intr Ctrl reg 6 (r/w) */ -#define MCFSIM_ICR7 0x53 /* Intr Ctrl reg 7 (r/w) */ -#define MCFSIM_ICR8 0x54 /* Intr Ctrl reg 8 (r/w) */ -#define MCFSIM_ICR9 0x55 /* Intr Ctrl reg 9 (r/w) */ -#define MCFSIM_ICR10 0x56 /* Intr Ctrl reg 10 (r/w) */ -#define MCFSIM_ICR11 0x57 /* Intr Ctrl reg 11 (r/w) */ - -#define MCFSIM_CSAR0 0x80 /* CS 0 Address 0 reg (r/w) */ -#define MCFSIM_CSMR0 0x84 /* CS 0 Mask 0 reg (r/w) */ -#define MCFSIM_CSCR0 0x8a /* CS 0 Control reg (r/w) */ -#define MCFSIM_CSAR1 0x8c /* CS 1 Address reg (r/w) */ -#define MCFSIM_CSMR1 0x90 /* CS 1 Mask reg (r/w) */ -#define MCFSIM_CSCR1 0x96 /* CS 1 Control reg (r/w) */ -#define MCFSIM_CSAR2 0x98 /* CS 2 Address reg (r/w) */ -#define MCFSIM_CSMR2 0x9c /* CS 2 Mask reg (r/w) */ -#define MCFSIM_CSCR2 0xa2 /* CS 2 Control reg (r/w) */ -#define MCFSIM_CSAR3 0xa4 /* CS 3 Address reg (r/w) */ -#define MCFSIM_CSMR3 0xa8 /* CS 3 Mask reg (r/w) */ -#define MCFSIM_CSCR3 0xae /* CS 3 Control reg (r/w) */ -#define MCFSIM_CSAR4 0xb0 /* CS 4 Address reg (r/w) */ -#define MCFSIM_CSMR4 0xb4 /* CS 4 Mask reg (r/w) */ -#define MCFSIM_CSCR4 0xba /* CS 4 Control reg (r/w) */ +#define MCFSIM_RSR (MCF_MBAR + 0x00) /* Reset Status */ +#define MCFSIM_SYPCR (MCF_MBAR + 0x01) /* System Protection */ +#define MCFSIM_SWIVR (MCF_MBAR + 0x02) /* SW Watchdog intr */ +#define MCFSIM_SWSR (MCF_MBAR + 0x03) /* SW Watchdog srv */ +#define MCFSIM_MPARK (MCF_MBAR + 0x0C) /* BUS Master Ctrl */ +#define MCFSIM_IPR (MCF_MBAR + 0x40) /* Interrupt Pending */ +#define MCFSIM_IMR (MCF_MBAR + 0x44) /* Interrupt Mask */ +#define MCFSIM_ICR0 (MCF_MBAR + 0x4c) /* Intr Ctrl reg 0 */ +#define MCFSIM_ICR1 (MCF_MBAR + 0x4d) /* Intr Ctrl reg 1 */ +#define MCFSIM_ICR2 (MCF_MBAR + 0x4e) /* Intr Ctrl reg 2 */ +#define MCFSIM_ICR3 (MCF_MBAR + 0x4f) /* Intr Ctrl reg 3 */ +#define MCFSIM_ICR4 (MCF_MBAR + 0x50) /* Intr Ctrl reg 4 */ +#define MCFSIM_ICR5 (MCF_MBAR + 0x51) /* Intr Ctrl reg 5 */ +#define MCFSIM_ICR6 (MCF_MBAR + 0x52) /* Intr Ctrl reg 6 */ +#define MCFSIM_ICR7 (MCF_MBAR + 0x53) /* Intr Ctrl reg 7 */ +#define MCFSIM_ICR8 (MCF_MBAR + 0x54) /* Intr Ctrl reg 8 */ +#define MCFSIM_ICR9 (MCF_MBAR + 0x55) /* Intr Ctrl reg 9 */ +#define MCFSIM_ICR10 (MCF_MBAR + 0x56) /* Intr Ctrl reg 10 */ +#define MCFSIM_ICR11 (MCF_MBAR + 0x57) /* Intr Ctrl reg 11 */ + +#define MCFSIM_CSAR0 (MCF_MBAR + 0x80) /* CS 0 Address reg */ +#define MCFSIM_CSMR0 (MCF_MBAR + 0x84) /* CS 0 Mask reg */ +#define MCFSIM_CSCR0 (MCF_MBAR + 0x8a) /* CS 0 Control reg */ +#define MCFSIM_CSAR1 (MCF_MBAR + 0x8c) /* CS 1 Address reg */ +#define MCFSIM_CSMR1 (MCF_MBAR + 0x90) /* CS 1 Mask reg */ +#define MCFSIM_CSCR1 (MCF_MBAR + 0x96) /* CS 1 Control reg */ +#define MCFSIM_CSAR2 (MCF_MBAR + 0x98) /* CS 2 Address reg */ +#define MCFSIM_CSMR2 (MCF_MBAR + 0x9c) /* CS 2 Mask reg */ +#define MCFSIM_CSCR2 (MCF_MBAR + 0xa2) /* CS 2 Control reg */ +#define MCFSIM_CSAR3 (MCF_MBAR + 0xa4) /* CS 3 Address reg */ +#define MCFSIM_CSMR3 (MCF_MBAR + 0xa8) /* CS 3 Mask reg */ +#define MCFSIM_CSCR3 (MCF_MBAR + 0xae) /* CS 3 Control reg */ +#define MCFSIM_CSAR4 (MCF_MBAR + 0xb0) /* CS 4 Address reg */ +#define MCFSIM_CSMR4 (MCF_MBAR + 0xb4) /* CS 4 Mask reg */ +#define MCFSIM_CSCR4 (MCF_MBAR + 0xba) /* CS 4 Control reg */ #define MCFSIM_DCR (MCF_MBAR + 0x100) /* DRAM Control */ #define MCFSIM_DACR0 (MCF_MBAR + 0x108) /* DRAM 0 Addr/Ctrl */ diff --git a/arch/m68k/include/asm/m5272sim.h b/arch/m68k/include/asm/m5272sim.h index a58f176..1fb01bb 100644 --- a/arch/m68k/include/asm/m5272sim.h +++ b/arch/m68k/include/asm/m5272sim.h @@ -21,52 +21,52 @@ /* * Define the 5272 SIM register set addresses. */ -#define MCFSIM_SCR 0x04 /* SIM Config reg (r/w) */ -#define MCFSIM_SPR 0x06 /* System Protection reg (r/w)*/ -#define MCFSIM_PMR 0x08 /* Power Management reg (r/w) */ -#define MCFSIM_APMR 0x0e /* Active Low Power reg (r/w) */ -#define MCFSIM_DIR 0x10 /* Device Identity reg (r/w) */ - -#define MCFSIM_ICR1 0x20 /* Intr Ctrl reg 1 (r/w) */ -#define MCFSIM_ICR2 0x24 /* Intr Ctrl reg 2 (r/w) */ -#define MCFSIM_ICR3 0x28 /* Intr Ctrl reg 3 (r/w) */ -#define MCFSIM_ICR4 0x2c /* Intr Ctrl reg 4 (r/w) */ - -#define MCFSIM_ISR 0x30 /* Interrupt Source reg (r/w) */ -#define MCFSIM_PITR 0x34 /* Interrupt Transition (r/w) */ -#define MCFSIM_PIWR 0x38 /* Interrupt Wakeup reg (r/w) */ -#define MCFSIM_PIVR 0x3f /* Interrupt Vector reg (r/w( */ - -#define MCFSIM_WRRR 0x280 /* Watchdog reference (r/w) */ -#define MCFSIM_WIRR 0x284 /* Watchdog interrupt (r/w) */ -#define MCFSIM_WCR 0x288 /* Watchdog counter (r/w) */ -#define MCFSIM_WER 0x28c /* Watchdog event (r/w) */ - -#define MCFSIM_CSBR0 0x40 /* CS0 Base Address (r/w) */ -#define MCFSIM_CSOR0 0x44 /* CS0 Option (r/w) */ -#define MCFSIM_CSBR1 0x48 /* CS1 Base Address (r/w) */ -#define MCFSIM_CSOR1 0x4c /* CS1 Option (r/w) */ -#define MCFSIM_CSBR2 0x50 /* CS2 Base Address (r/w) */ -#define MCFSIM_CSOR2 0x54 /* CS2 Option (r/w) */ -#define MCFSIM_CSBR3 0x58 /* CS3 Base Address (r/w) */ -#define MCFSIM_CSOR3 0x5c /* CS3 Option (r/w) */ -#define MCFSIM_CSBR4 0x60 /* CS4 Base Address (r/w) */ -#define MCFSIM_CSOR4 0x64 /* CS4 Option (r/w) */ -#define MCFSIM_CSBR5 0x68 /* CS5 Base Address (r/w) */ -#define MCFSIM_CSOR5 0x6c /* CS5 Option (r/w) */ -#define MCFSIM_CSBR6 0x70 /* CS6 Base Address (r/w) */ -#define MCFSIM_CSOR6 0x74 /* CS6 Option (r/w) */ -#define MCFSIM_CSBR7 0x78 /* CS7 Base Address (r/w) */ -#define MCFSIM_CSOR7 0x7c /* CS7 Option (r/w) */ - -#define MCFSIM_SDCR 0x180 /* SDRAM Configuration (r/w) */ -#define MCFSIM_SDTR 0x184 /* SDRAM Timing (r/w) */ -#define MCFSIM_DCAR0 0x4c /* DRAM 0 Address reg(r/w) */ -#define MCFSIM_DCMR0 0x50 /* DRAM 0 Mask reg (r/w) */ -#define MCFSIM_DCCR0 0x57 /* DRAM 0 Control reg (r/w) */ -#define MCFSIM_DCAR1 0x58 /* DRAM 1 Address reg (r/w) */ -#define MCFSIM_DCMR1 0x5c /* DRAM 1 Mask reg (r/w) */ -#define MCFSIM_DCCR1 0x63 /* DRAM 1 Control reg (r/w) */ +#define MCFSIM_SCR (MCF_MBAR + 0x04) /* SIM Config reg */ +#define MCFSIM_SPR (MCF_MBAR + 0x06) /* System Protection */ +#define MCFSIM_PMR (MCF_MBAR + 0x08) /* Power Management */ +#define MCFSIM_APMR (MCF_MBAR + 0x0e) /* Active Low Power */ +#define MCFSIM_DIR (MCF_MBAR + 0x10) /* Device Identity */ + +#define MCFSIM_ICR1 (MCF_MBAR + 0x20) /* Intr Ctrl reg 1 */ +#define MCFSIM_ICR2 (MCF_MBAR + 0x24) /* Intr Ctrl reg 2 */ +#define MCFSIM_ICR3 (MCF_MBAR + 0x28) /* Intr Ctrl reg 3 */ +#define MCFSIM_ICR4 (MCF_MBAR + 0x2c) /* Intr Ctrl reg 4 */ + +#define MCFSIM_ISR (MCF_MBAR + 0x30) /* Intr Source */ +#define MCFSIM_PITR (MCF_MBAR + 0x34) /* Intr Transition */ +#define MCFSIM_PIWR (MCF_MBAR + 0x38) /* Intr Wakeup */ +#define MCFSIM_PIVR (MCF_MBAR + 0x3f) /* Intr Vector */ + +#define MCFSIM_WRRR (MCF_MBAR + 0x280) /* Watchdog reference */ +#define MCFSIM_WIRR (MCF_MBAR + 0x284) /* Watchdog interrupt */ +#define MCFSIM_WCR (MCF_MBAR + 0x288) /* Watchdog counter */ +#define MCFSIM_WER (MCF_MBAR + 0x28c) /* Watchdog event */ + +#define MCFSIM_CSBR0 (MCF_MBAR + 0x40) /* CS0 Base Address */ +#define MCFSIM_CSOR0 (MCF_MBAR + 0x44) /* CS0 Option */ +#define MCFSIM_CSBR1 (MCF_MBAR + 0x48) /* CS1 Base Address */ +#define MCFSIM_CSOR1 (MCF_MBAR + 0x4c) /* CS1 Option */ +#define MCFSIM_CSBR2 (MCF_MBAR + 0x50) /* CS2 Base Address */ +#define MCFSIM_CSOR2 (MCF_MBAR + 0x54) /* CS2 Option */ +#define MCFSIM_CSBR3 (MCF_MBAR + 0x58) /* CS3 Base Address */ +#define MCFSIM_CSOR3 (MCF_MBAR + 0x5c) /* CS3 Option */ +#define MCFSIM_CSBR4 (MCF_MBAR + 0x60) /* CS4 Base Address */ +#define MCFSIM_CSOR4 (MCF_MBAR + 0x64) /* CS4 Option */ +#define MCFSIM_CSBR5 (MCF_MBAR + 0x68) /* CS5 Base Address */ +#define MCFSIM_CSOR5 (MCF_MBAR + 0x6c) /* CS5 Option */ +#define MCFSIM_CSBR6 (MCF_MBAR + 0x70) /* CS6 Base Address */ +#define MCFSIM_CSOR6 (MCF_MBAR + 0x74) /* CS6 Option */ +#define MCFSIM_CSBR7 (MCF_MBAR + 0x78) /* CS7 Base Address */ +#define MCFSIM_CSOR7 (MCF_MBAR + 0x7c) /* CS7 Option */ + +#define MCFSIM_SDCR (MCF_MBAR + 0x180) /* SDRAM Config */ +#define MCFSIM_SDTR (MCF_MBAR + 0x184) /* SDRAM Timing */ +#define MCFSIM_DCAR0 (MCF_MBAR + 0x4c) /* DRAM 0 Address */ +#define MCFSIM_DCMR0 (MCF_MBAR + 0x50) /* DRAM 0 Mask */ +#define MCFSIM_DCCR0 (MCF_MBAR + 0x57) /* DRAM 0 Control */ +#define MCFSIM_DCAR1 (MCF_MBAR + 0x58) /* DRAM 1 Address */ +#define MCFSIM_DCMR1 (MCF_MBAR + 0x5c) /* DRAM 1 Mask reg */ +#define MCFSIM_DCCR1 (MCF_MBAR + 0x63) /* DRAM 1 Control */ #define MCFUART_BASE0 (MCF_MBAR + 0x100) /* Base address UART0 */ #define MCFUART_BASE1 (MCF_MBAR + 0x140) /* Base address UART1 */ @@ -132,8 +132,9 @@ /* * Generic GPIO support */ -#define MCFGPIO_PIN_MAX 48 -#define MCFGPIO_IRQ_MAX -1 -#define MCFGPIO_IRQ_VECBASE -1 +#define MCFGPIO_PIN_MAX 48 +#define MCFGPIO_IRQ_MAX -1 +#define MCFGPIO_IRQ_VECBASE -1 + /****************************************************************************/ #endif /* m5272sim_h */ diff --git a/arch/m68k/include/asm/m527xsim.h b/arch/m68k/include/asm/m527xsim.h index 71aa510..1bebbe7 100644 --- a/arch/m68k/include/asm/m527xsim.h +++ b/arch/m68k/include/asm/m527xsim.h @@ -184,19 +184,33 @@ /* * Generic GPIO support */ -#define MCFGPIO_PODR MCFGPIO_PODR_ADDR -#define MCFGPIO_PDDR MCFGPIO_PDDR_ADDR -#define MCFGPIO_PPDR MCFGPIO_PPDSDR_ADDR -#define MCFGPIO_SETR MCFGPIO_PPDSDR_ADDR -#define MCFGPIO_CLRR MCFGPIO_PCLRR_ADDR +#define MCFGPIO_PODR MCFGPIO_PODR_ADDR +#define MCFGPIO_PDDR MCFGPIO_PDDR_ADDR +#define MCFGPIO_PPDR MCFGPIO_PPDSDR_ADDR +#define MCFGPIO_SETR MCFGPIO_PPDSDR_ADDR +#define MCFGPIO_CLRR MCFGPIO_PCLRR_ADDR -#define MCFGPIO_PIN_MAX 100 -#define MCFGPIO_IRQ_MAX 8 -#define MCFGPIO_IRQ_VECBASE MCFINT_VECBASE +#define MCFGPIO_PIN_MAX 100 +#define MCFGPIO_IRQ_MAX 8 +#define MCFGPIO_IRQ_VECBASE MCFINT_VECBASE +/* + * Port Pin Assignment registers. + */ +#define MCFGPIO_PAR_AD (MCF_IPSBAR + 0x100040) +#define MCFGPIO_PAR_BUSCTL (MCF_IPSBAR + 0x100042) +#define MCFGPIO_PAR_BS (MCF_IPSBAR + 0x100044) +#define MCFGPIO_PAR_CS (MCF_IPSBAR + 0x100045) +#define MCFGPIO_PAR_SDRAM (MCF_IPSBAR + 0x100046) +#define MCFGPIO_PAR_FECI2C (MCF_IPSBAR + 0x100047) +#define MCFGPIO_PAR_UART (MCF_IPSBAR + 0x100048) #define MCFGPIO_PAR_QSPI (MCF_IPSBAR + 0x10004A) #define MCFGPIO_PAR_TIMER (MCF_IPSBAR + 0x10004C) -#endif + +#define UART0_ENABLE_MASK 0x000f +#define UART1_ENABLE_MASK 0x0ff0 +#define UART2_ENABLE_MASK 0x3000 +#endif /* CONFIG_M5271 */ #ifdef CONFIG_M5275 #define MCFGPIO_PODR_BUSCTL (MCF_IPSBAR + 0x100004) @@ -279,18 +293,36 @@ /* * Generic GPIO support */ -#define MCFGPIO_PODR MCFGPIO_PODR_BUSCTL -#define MCFGPIO_PDDR MCFGPIO_PDDR_BUSCTL -#define MCFGPIO_PPDR MCFGPIO_PPDSDR_BUSCTL -#define MCFGPIO_SETR MCFGPIO_PPDSDR_BUSCTL -#define MCFGPIO_CLRR MCFGPIO_PCLRR_BUSCTL +#define MCFGPIO_PODR MCFGPIO_PODR_BUSCTL +#define MCFGPIO_PDDR MCFGPIO_PDDR_BUSCTL +#define MCFGPIO_PPDR MCFGPIO_PPDSDR_BUSCTL +#define MCFGPIO_SETR MCFGPIO_PPDSDR_BUSCTL +#define MCFGPIO_CLRR MCFGPIO_PCLRR_BUSCTL -#define MCFGPIO_PIN_MAX 148 -#define MCFGPIO_IRQ_MAX 8 -#define MCFGPIO_IRQ_VECBASE MCFINT_VECBASE +#define MCFGPIO_PIN_MAX 148 +#define MCFGPIO_IRQ_MAX 8 +#define MCFGPIO_IRQ_VECBASE MCFINT_VECBASE +/* + * Port Pin Assignment registers. + */ +#define MCFGPIO_PAR_AD (MCF_IPSBAR + 0x100070) +#define MCFGPIO_PAR_CS (MCF_IPSBAR + 0x100071) +#define MCFGPIO_PAR_BUSCTL (MCF_IPSBAR + 0x100072) +#define MCFGPIO_PAR_USB (MCF_IPSBAR + 0x100076) +#define MCFGPIO_PAR_FEC0HL (MCF_IPSBAR + 0x100078) +#define MCFGPIO_PAR_FEC1HL (MCF_IPSBAR + 0x100079) +#define MCFGPIO_PAR_TIMER (MCF_IPSBAR + 0x10007A) +#define MCFGPIO_PAR_UART (MCF_IPSBAR + 0x10007C) #define MCFGPIO_PAR_QSPI (MCF_IPSBAR + 0x10007E) -#endif +#define MCFGPIO_PAR_SDRAM (MCF_IPSBAR + 0x100080) +#define MCFGPIO_PAR_FECI2C (MCF_IPSBAR + 0x100082) +#define MCFGPIO_PAR_BS (MCF_IPSBAR + 0x100084) + +#define UART0_ENABLE_MASK 0x000f +#define UART1_ENABLE_MASK 0x00f0 +#define UART2_ENABLE_MASK 0x3f00 +#endif /* CONFIG_M5275 */ /* * PIT timer base addresses. @@ -311,22 +343,6 @@ #define MCFEPORT_EPFR (MCF_IPSBAR + 0x130006) /* - * GPIO pins setups to enable the UARTs. - */ -#ifdef CONFIG_M5271 -#define MCF_GPIO_PAR_UART 0x100048 /* PAR UART address */ -#define UART0_ENABLE_MASK 0x000f -#define UART1_ENABLE_MASK 0x0ff0 -#define UART2_ENABLE_MASK 0x3000 -#endif -#ifdef CONFIG_M5275 -#define MCF_GPIO_PAR_UART 0x10007c /* PAR UART address */ -#define UART0_ENABLE_MASK 0x000f -#define UART1_ENABLE_MASK 0x00f0 -#define UART2_ENABLE_MASK 0x3f00 -#endif - -/* * Reset Control Unit (relative to IPSBAR). */ #define MCF_RCR (MCF_IPSBAR + 0x110000) diff --git a/arch/m68k/include/asm/m528xsim.h b/arch/m68k/include/asm/m528xsim.h index 4acb3c0..cf68ca0 100644 --- a/arch/m68k/include/asm/m528xsim.h +++ b/arch/m68k/include/asm/m528xsim.h @@ -233,23 +233,6 @@ #define MCFGPIO_IRQ_VECBASE MCFINT_VECBASE #define MCFGPIO_PIN_MAX 180 - -/* - * Derek Cheung - 6 Feb 2005 - * add I2C and QSPI register definition using Freescale's MCF5282 - */ -/* set Port AS pin for I2C or UART */ -#define MCF5282_GPIO_PASPAR (volatile u16 *) (MCF_IPSBAR + 0x00100056) - -/* Port UA Pin Assignment Register (8 Bit) */ -#define MCF5282_GPIO_PUAPAR 0x10005C - -/* Interrupt Mask Register Register Low */ -#define MCF5282_INTC0_IMRL (volatile u32 *) (MCF_IPSBAR + 0x0C0C) -/* Interrupt Control Register 7 */ -#define MCF5282_INTC0_ICR17 (volatile u8 *) (MCF_IPSBAR + 0x0C51) - - /* * Reset Control Unit (relative to IPSBAR). */ @@ -259,37 +242,5 @@ #define MCF_RCR_SWRESET 0x80 /* Software reset bit */ #define MCF_RCR_FRCSTOUT 0x40 /* Force external reset */ -/********************************************************************* -* -* Inter-IC (I2C) Module -* -*********************************************************************/ -/* Read/Write access macros for general use */ -#define MCF5282_I2C_I2ADR (volatile u8 *) (MCF_IPSBAR + 0x0300) // Address -#define MCF5282_I2C_I2FDR (volatile u8 *) (MCF_IPSBAR + 0x0304) // Freq Divider -#define MCF5282_I2C_I2CR (volatile u8 *) (MCF_IPSBAR + 0x0308) // Control -#define MCF5282_I2C_I2SR (volatile u8 *) (MCF_IPSBAR + 0x030C) // Status -#define MCF5282_I2C_I2DR (volatile u8 *) (MCF_IPSBAR + 0x0310) // Data I/O - -/* Bit level definitions and macros */ -#define MCF5282_I2C_I2ADR_ADDR(x) (((x)&0x7F)<<0x01) - -#define MCF5282_I2C_I2FDR_IC(x) (((x)&0x3F)) - -#define MCF5282_I2C_I2CR_IEN (0x80) // I2C enable -#define MCF5282_I2C_I2CR_IIEN (0x40) // interrupt enable -#define MCF5282_I2C_I2CR_MSTA (0x20) // master/slave mode -#define MCF5282_I2C_I2CR_MTX (0x10) // transmit/receive mode -#define MCF5282_I2C_I2CR_TXAK (0x08) // transmit acknowledge enable -#define MCF5282_I2C_I2CR_RSTA (0x04) // repeat start - -#define MCF5282_I2C_I2SR_ICF (0x80) // data transfer bit -#define MCF5282_I2C_I2SR_IAAS (0x40) // I2C addressed as a slave -#define MCF5282_I2C_I2SR_IBB (0x20) // I2C bus busy -#define MCF5282_I2C_I2SR_IAL (0x10) // aribitration lost -#define MCF5282_I2C_I2SR_SRW (0x04) // slave read/write -#define MCF5282_I2C_I2SR_IIF (0x02) // I2C interrupt -#define MCF5282_I2C_I2SR_RXAK (0x01) // received acknowledge - - +/****************************************************************************/ #endif /* m528xsim_h */ diff --git a/arch/m68k/include/asm/m5307sim.h b/arch/m68k/include/asm/m5307sim.h index 3bc3ada..5d0bb7e 100644 --- a/arch/m68k/include/asm/m5307sim.h +++ b/arch/m68k/include/asm/m5307sim.h @@ -23,71 +23,71 @@ /* * Define the 5307 SIM register set addresses. */ -#define MCFSIM_RSR 0x00 /* Reset Status reg (r/w) */ -#define MCFSIM_SYPCR 0x01 /* System Protection reg (r/w)*/ -#define MCFSIM_SWIVR 0x02 /* SW Watchdog intr reg (r/w) */ -#define MCFSIM_SWSR 0x03 /* SW Watchdog service (r/w) */ -#define MCFSIM_PAR 0x04 /* Pin Assignment reg (r/w) */ -#define MCFSIM_IRQPAR 0x06 /* Interrupt Assignment reg (r/w) */ -#define MCFSIM_PLLCR 0x08 /* PLL Control Reg*/ -#define MCFSIM_MPARK 0x0C /* BUS Master Control Reg*/ -#define MCFSIM_IPR 0x40 /* Interrupt Pend reg (r/w) */ -#define MCFSIM_IMR 0x44 /* Interrupt Mask reg (r/w) */ -#define MCFSIM_AVR 0x4b /* Autovector Ctrl reg (r/w) */ -#define MCFSIM_ICR0 0x4c /* Intr Ctrl reg 0 (r/w) */ -#define MCFSIM_ICR1 0x4d /* Intr Ctrl reg 1 (r/w) */ -#define MCFSIM_ICR2 0x4e /* Intr Ctrl reg 2 (r/w) */ -#define MCFSIM_ICR3 0x4f /* Intr Ctrl reg 3 (r/w) */ -#define MCFSIM_ICR4 0x50 /* Intr Ctrl reg 4 (r/w) */ -#define MCFSIM_ICR5 0x51 /* Intr Ctrl reg 5 (r/w) */ -#define MCFSIM_ICR6 0x52 /* Intr Ctrl reg 6 (r/w) */ -#define MCFSIM_ICR7 0x53 /* Intr Ctrl reg 7 (r/w) */ -#define MCFSIM_ICR8 0x54 /* Intr Ctrl reg 8 (r/w) */ -#define MCFSIM_ICR9 0x55 /* Intr Ctrl reg 9 (r/w) */ -#define MCFSIM_ICR10 0x56 /* Intr Ctrl reg 10 (r/w) */ -#define MCFSIM_ICR11 0x57 /* Intr Ctrl reg 11 (r/w) */ - -#define MCFSIM_CSAR0 0x80 /* CS 0 Address 0 reg (r/w) */ -#define MCFSIM_CSMR0 0x84 /* CS 0 Mask 0 reg (r/w) */ -#define MCFSIM_CSCR0 0x8a /* CS 0 Control reg (r/w) */ -#define MCFSIM_CSAR1 0x8c /* CS 1 Address reg (r/w) */ -#define MCFSIM_CSMR1 0x90 /* CS 1 Mask reg (r/w) */ -#define MCFSIM_CSCR1 0x96 /* CS 1 Control reg (r/w) */ +#define MCFSIM_RSR (MCF_MBAR + 0x00) /* Reset Status reg */ +#define MCFSIM_SYPCR (MCF_MBAR + 0x01) /* System Protection */ +#define MCFSIM_SWIVR (MCF_MBAR + 0x02) /* SW Watchdog intr */ +#define MCFSIM_SWSR (MCF_MBAR + 0x03) /* SW Watchdog service*/ +#define MCFSIM_PAR (MCF_MBAR + 0x04) /* Pin Assignment */ +#define MCFSIM_IRQPAR (MCF_MBAR + 0x06) /* Itr Assignment */ +#define MCFSIM_PLLCR (MCF_MBAR + 0x08) /* PLL Ctrl Reg */ +#define MCFSIM_MPARK (MCF_MBAR + 0x0C) /* BUS Master Ctrl */ +#define MCFSIM_IPR (MCF_MBAR + 0x40) /* Interrupt Pend */ +#define MCFSIM_IMR (MCF_MBAR + 0x44) /* Interrupt Mask */ +#define MCFSIM_AVR (MCF_MBAR + 0x4b) /* Autovector Ctrl */ +#define MCFSIM_ICR0 (MCF_MBAR + 0x4c) /* Intr Ctrl reg 0 */ +#define MCFSIM_ICR1 (MCF_MBAR + 0x4d) /* Intr Ctrl reg 1 */ +#define MCFSIM_ICR2 (MCF_MBAR + 0x4e) /* Intr Ctrl reg 2 */ +#define MCFSIM_ICR3 (MCF_MBAR + 0x4f) /* Intr Ctrl reg 3 */ +#define MCFSIM_ICR4 (MCF_MBAR + 0x50) /* Intr Ctrl reg 4 */ +#define MCFSIM_ICR5 (MCF_MBAR + 0x51) /* Intr Ctrl reg 5 */ +#define MCFSIM_ICR6 (MCF_MBAR + 0x52) /* Intr Ctrl reg 6 */ +#define MCFSIM_ICR7 (MCF_MBAR + 0x53) /* Intr Ctrl reg 7 */ +#define MCFSIM_ICR8 (MCF_MBAR + 0x54) /* Intr Ctrl reg 8 */ +#define MCFSIM_ICR9 (MCF_MBAR + 0x55) /* Intr Ctrl reg 9 */ +#define MCFSIM_ICR10 (MCF_MBAR + 0x56) /* Intr Ctrl reg 10 */ +#define MCFSIM_ICR11 (MCF_MBAR + 0x57) /* Intr Ctrl reg 11 */ + +#define MCFSIM_CSAR0 (MCF_MBAR + 0x80) /* CS 0 Address reg */ +#define MCFSIM_CSMR0 (MCF_MBAR + 0x84) /* CS 0 Mask reg */ +#define MCFSIM_CSCR0 (MCF_MBAR + 0x8a) /* CS 0 Control reg */ +#define MCFSIM_CSAR1 (MCF_MBAR + 0x8c) /* CS 1 Address reg */ +#define MCFSIM_CSMR1 (MCF_MBAR + 0x90) /* CS 1 Mask reg */ +#define MCFSIM_CSCR1 (MCF_MBAR + 0x96) /* CS 1 Control reg */ #ifdef CONFIG_OLDMASK -#define MCFSIM_CSBAR 0x98 /* CS Base Address reg (r/w) */ -#define MCFSIM_CSBAMR 0x9c /* CS Base Mask reg (r/w) */ -#define MCFSIM_CSMR2 0x9e /* CS 2 Mask reg (r/w) */ -#define MCFSIM_CSCR2 0xa2 /* CS 2 Control reg (r/w) */ -#define MCFSIM_CSMR3 0xaa /* CS 3 Mask reg (r/w) */ -#define MCFSIM_CSCR3 0xae /* CS 3 Control reg (r/w) */ -#define MCFSIM_CSMR4 0xb6 /* CS 4 Mask reg (r/w) */ -#define MCFSIM_CSCR4 0xba /* CS 4 Control reg (r/w) */ -#define MCFSIM_CSMR5 0xc2 /* CS 5 Mask reg (r/w) */ -#define MCFSIM_CSCR5 0xc6 /* CS 5 Control reg (r/w) */ -#define MCFSIM_CSMR6 0xce /* CS 6 Mask reg (r/w) */ -#define MCFSIM_CSCR6 0xd2 /* CS 6 Control reg (r/w) */ -#define MCFSIM_CSMR7 0xda /* CS 7 Mask reg (r/w) */ -#define MCFSIM_CSCR7 0xde /* CS 7 Control reg (r/w) */ +#define MCFSIM_CSBAR (MCF_MBAR + 0x98) /* CS Base Address */ +#define MCFSIM_CSBAMR (MCF_MBAR + 0x9c) /* CS Base Mask */ +#define MCFSIM_CSMR2 (MCF_MBAR + 0x9e) /* CS 2 Mask reg */ +#define MCFSIM_CSCR2 (MCF_MBAR + 0xa2) /* CS 2 Control reg */ +#define MCFSIM_CSMR3 (MCF_MBAR + 0xaa) /* CS 3 Mask reg */ +#define MCFSIM_CSCR3 (MCF_MBAR + 0xae) /* CS 3 Control reg */ +#define MCFSIM_CSMR4 (MCF_MBAR + 0xb6) /* CS 4 Mask reg */ +#define MCFSIM_CSCR4 (MCF_MBAR + 0xba) /* CS 4 Control reg */ +#define MCFSIM_CSMR5 (MCF_MBAR + 0xc2) /* CS 5 Mask reg */ +#define MCFSIM_CSCR5 (MCF_MBAR + 0xc6) /* CS 5 Control reg */ +#define MCFSIM_CSMR6 (MCF_MBAR + 0xce) /* CS 6 Mask reg */ +#define MCFSIM_CSCR6 (MCF_MBAR + 0xd2) /* CS 6 Control reg */ +#define MCFSIM_CSMR7 (MCF_MBAR + 0xda) /* CS 7 Mask reg */ +#define MCFSIM_CSCR7 (MCF_MBAR + 0xde) /* CS 7 Control reg */ #else -#define MCFSIM_CSAR2 0x98 /* CS 2 Address reg (r/w) */ -#define MCFSIM_CSMR2 0x9c /* CS 2 Mask reg (r/w) */ -#define MCFSIM_CSCR2 0xa2 /* CS 2 Control reg (r/w) */ -#define MCFSIM_CSAR3 0xa4 /* CS 3 Address reg (r/w) */ -#define MCFSIM_CSMR3 0xa8 /* CS 3 Mask reg (r/w) */ -#define MCFSIM_CSCR3 0xae /* CS 3 Control reg (r/w) */ -#define MCFSIM_CSAR4 0xb0 /* CS 4 Address reg (r/w) */ -#define MCFSIM_CSMR4 0xb4 /* CS 4 Mask reg (r/w) */ -#define MCFSIM_CSCR4 0xba /* CS 4 Control reg (r/w) */ -#define MCFSIM_CSAR5 0xbc /* CS 5 Address reg (r/w) */ -#define MCFSIM_CSMR5 0xc0 /* CS 5 Mask reg (r/w) */ -#define MCFSIM_CSCR5 0xc6 /* CS 5 Control reg (r/w) */ -#define MCFSIM_CSAR6 0xc8 /* CS 6 Address reg (r/w) */ -#define MCFSIM_CSMR6 0xcc /* CS 6 Mask reg (r/w) */ -#define MCFSIM_CSCR6 0xd2 /* CS 6 Control reg (r/w) */ -#define MCFSIM_CSAR7 0xd4 /* CS 7 Address reg (r/w) */ -#define MCFSIM_CSMR7 0xd8 /* CS 7 Mask reg (r/w) */ -#define MCFSIM_CSCR7 0xde /* CS 7 Control reg (r/w) */ +#define MCFSIM_CSAR2 (MCF_MBAR + 0x98) /* CS 2 Address reg */ +#define MCFSIM_CSMR2 (MCF_MBAR + 0x9c) /* CS 2 Mask reg */ +#define MCFSIM_CSCR2 (MCF_MBAR + 0xa2) /* CS 2 Control reg */ +#define MCFSIM_CSAR3 (MCF_MBAR + 0xa4) /* CS 3 Address reg */ +#define MCFSIM_CSMR3 (MCF_MBAR + 0xa8) /* CS 3 Mask reg */ +#define MCFSIM_CSCR3 (MCF_MBAR + 0xae) /* CS 3 Control reg */ +#define MCFSIM_CSAR4 (MCF_MBAR + 0xb0) /* CS 4 Address reg */ +#define MCFSIM_CSMR4 (MCF_MBAR + 0xb4) /* CS 4 Mask reg */ +#define MCFSIM_CSCR4 (MCF_MBAR + 0xba) /* CS 4 Control reg */ +#define MCFSIM_CSAR5 (MCF_MBAR + 0xbc) /* CS 5 Address reg */ +#define MCFSIM_CSMR5 (MCF_MBAR + 0xc0) /* CS 5 Mask reg */ +#define MCFSIM_CSCR5 (MCF_MBAR + 0xc6) /* CS 5 Control reg */ +#define MCFSIM_CSAR6 (MCF_MBAR + 0xc8) /* CS 6 Address reg */ +#define MCFSIM_CSMR6 (MCF_MBAR + 0xcc) /* CS 6 Mask reg */ +#define MCFSIM_CSCR6 (MCF_MBAR + 0xd2) /* CS 6 Control reg */ +#define MCFSIM_CSAR7 (MCF_MBAR + 0xd4) /* CS 7 Address reg */ +#define MCFSIM_CSMR7 (MCF_MBAR + 0xd8) /* CS 7 Mask reg */ +#define MCFSIM_CSCR7 (MCF_MBAR + 0xde) /* CS 7 Control reg */ #endif /* CONFIG_OLDMASK */ #define MCFSIM_DCR (MCF_MBAR + 0x100) /* DRAM Control */ @@ -127,9 +127,9 @@ /* * Generic GPIO support */ -#define MCFGPIO_PIN_MAX 16 -#define MCFGPIO_IRQ_MAX -1 -#define MCFGPIO_IRQ_VECBASE -1 +#define MCFGPIO_PIN_MAX 16 +#define MCFGPIO_IRQ_MAX -1 +#define MCFGPIO_IRQ_VECBASE -1 /* Definition offset address for CS2-7 -- old mask 5307 */ @@ -167,9 +167,9 @@ /* * Defines for the IRQPAR Register */ -#define IRQ5_LEVEL4 0x80 -#define IRQ3_LEVEL6 0x40 -#define IRQ1_LEVEL2 0x20 +#define IRQ5_LEVEL4 0x80 +#define IRQ3_LEVEL6 0x40 +#define IRQ1_LEVEL2 0x20 /* * Define system peripheral IRQ usage. diff --git a/arch/m68k/include/asm/m532xsim.h b/arch/m68k/include/asm/m532xsim.h index 5ca7b29..8668e47 100644 --- a/arch/m68k/include/asm/m532xsim.h +++ b/arch/m68k/include/asm/m532xsim.h @@ -15,10 +15,6 @@ #include <asm/m53xxacr.h> -#define MCF_REG32(x) (*(volatile unsigned long *)(x)) -#define MCF_REG16(x) (*(volatile unsigned short *)(x)) -#define MCF_REG08(x) (*(volatile unsigned char *)(x)) - #define MCFINT_VECBASE 64 #define MCFINT_UART0 26 /* Interrupt number for UART0 */ #define MCFINT_UART1 27 /* Interrupt number for UART1 */ @@ -38,7 +34,7 @@ #define MCF_IRQ_QSPI (MCFINT_VECBASE + MCFINT_QSPI) -#define MCF_WTM_WCR MCF_REG16(0xFC098000) +#define MCF_WTM_WCR 0xFC098000 /* * Define the 532x SIM register set addresses. @@ -152,42 +148,6 @@ #define MCFPM_PPMHR1 0xfc040038 #define MCFPM_LPCR 0xec090007 -/********************************************************************* - * - * Inter-IC (I2C) Module - * - *********************************************************************/ - -/* Read/Write access macros for general use */ -#define MCF532x_I2C_I2ADR (volatile u8 *) (0xFC058000) // Address -#define MCF532x_I2C_I2FDR (volatile u8 *) (0xFC058004) // Freq Divider -#define MCF532x_I2C_I2CR (volatile u8 *) (0xFC058008) // Control -#define MCF532x_I2C_I2SR (volatile u8 *) (0xFC05800C) // Status -#define MCF532x_I2C_I2DR (volatile u8 *) (0xFC058010) // Data I/O - -/* Bit level definitions and macros */ -#define MCF532x_I2C_I2ADR_ADDR(x) (((x)&0x7F)<<0x01) - -#define MCF532x_I2C_I2FDR_IC(x) (((x)&0x3F)) - -#define MCF532x_I2C_I2CR_IEN (0x80) // I2C enable -#define MCF532x_I2C_I2CR_IIEN (0x40) // interrupt enable -#define MCF532x_I2C_I2CR_MSTA (0x20) // master/slave mode -#define MCF532x_I2C_I2CR_MTX (0x10) // transmit/receive mode -#define MCF532x_I2C_I2CR_TXAK (0x08) // transmit acknowledge enable -#define MCF532x_I2C_I2CR_RSTA (0x04) // repeat start - -#define MCF532x_I2C_I2SR_ICF (0x80) // data transfer bit -#define MCF532x_I2C_I2SR_IAAS (0x40) // I2C addressed as a slave -#define MCF532x_I2C_I2SR_IBB (0x20) // I2C bus busy -#define MCF532x_I2C_I2SR_IAL (0x10) // aribitration lost -#define MCF532x_I2C_I2SR_SRW (0x04) // slave read/write -#define MCF532x_I2C_I2SR_IIF (0x02) // I2C interrupt -#define MCF532x_I2C_I2SR_RXAK (0x01) // received acknowledge - -#define MCF532x_PAR_FECI2C (volatile u8 *) (0xFC0A4053) - - /* * The M5329EVB board needs a help getting its devices initialized * at kernel start time if dBUG doesn't set it up (for example @@ -217,13 +177,13 @@ *********************************************************************/ /* Register read/write macros */ -#define MCF_CCM_CCR MCF_REG16(0xFC0A0004) -#define MCF_CCM_RCON MCF_REG16(0xFC0A0008) -#define MCF_CCM_CIR MCF_REG16(0xFC0A000A) -#define MCF_CCM_MISCCR MCF_REG16(0xFC0A0010) -#define MCF_CCM_CDR MCF_REG16(0xFC0A0012) -#define MCF_CCM_UHCSR MCF_REG16(0xFC0A0014) -#define MCF_CCM_UOCSR MCF_REG16(0xFC0A0016) +#define MCF_CCM_CCR 0xFC0A0004 +#define MCF_CCM_RCON 0xFC0A0008 +#define MCF_CCM_CIR 0xFC0A000A +#define MCF_CCM_MISCCR 0xFC0A0010 +#define MCF_CCM_CDR 0xFC0A0012 +#define MCF_CCM_UHCSR 0xFC0A0014 +#define MCF_CCM_UOCSR 0xFC0A0016 /* Bit definitions and macros for MCF_CCM_CCR */ #define MCF_CCM_CCR_RESERVED (0x0001) @@ -287,104 +247,29 @@ /********************************************************************* * - * DMA Timers (DTIM) - * - *********************************************************************/ - -/* Register read/write macros */ -#define MCF_DTIM0_DTMR MCF_REG16(0xFC070000) -#define MCF_DTIM0_DTXMR MCF_REG08(0xFC070002) -#define MCF_DTIM0_DTER MCF_REG08(0xFC070003) -#define MCF_DTIM0_DTRR MCF_REG32(0xFC070004) -#define MCF_DTIM0_DTCR MCF_REG32(0xFC070008) -#define MCF_DTIM0_DTCN MCF_REG32(0xFC07000C) -#define MCF_DTIM1_DTMR MCF_REG16(0xFC074000) -#define MCF_DTIM1_DTXMR MCF_REG08(0xFC074002) -#define MCF_DTIM1_DTER MCF_REG08(0xFC074003) -#define MCF_DTIM1_DTRR MCF_REG32(0xFC074004) -#define MCF_DTIM1_DTCR MCF_REG32(0xFC074008) -#define MCF_DTIM1_DTCN MCF_REG32(0xFC07400C) -#define MCF_DTIM2_DTMR MCF_REG16(0xFC078000) -#define MCF_DTIM2_DTXMR MCF_REG08(0xFC078002) -#define MCF_DTIM2_DTER MCF_REG08(0xFC078003) -#define MCF_DTIM2_DTRR MCF_REG32(0xFC078004) -#define MCF_DTIM2_DTCR MCF_REG32(0xFC078008) -#define MCF_DTIM2_DTCN MCF_REG32(0xFC07800C) -#define MCF_DTIM3_DTMR MCF_REG16(0xFC07C000) -#define MCF_DTIM3_DTXMR MCF_REG08(0xFC07C002) -#define MCF_DTIM3_DTER MCF_REG08(0xFC07C003) -#define MCF_DTIM3_DTRR MCF_REG32(0xFC07C004) -#define MCF_DTIM3_DTCR MCF_REG32(0xFC07C008) -#define MCF_DTIM3_DTCN MCF_REG32(0xFC07C00C) -#define MCF_DTIM_DTMR(x) MCF_REG16(0xFC070000+((x)*0x4000)) -#define MCF_DTIM_DTXMR(x) MCF_REG08(0xFC070002+((x)*0x4000)) -#define MCF_DTIM_DTER(x) MCF_REG08(0xFC070003+((x)*0x4000)) -#define MCF_DTIM_DTRR(x) MCF_REG32(0xFC070004+((x)*0x4000)) -#define MCF_DTIM_DTCR(x) MCF_REG32(0xFC070008+((x)*0x4000)) -#define MCF_DTIM_DTCN(x) MCF_REG32(0xFC07000C+((x)*0x4000)) - -/* Bit definitions and macros for MCF_DTIM_DTMR */ -#define MCF_DTIM_DTMR_RST (0x0001) -#define MCF_DTIM_DTMR_CLK(x) (((x)&0x0003)<<1) -#define MCF_DTIM_DTMR_FRR (0x0008) -#define MCF_DTIM_DTMR_ORRI (0x0010) -#define MCF_DTIM_DTMR_OM (0x0020) -#define MCF_DTIM_DTMR_CE(x) (((x)&0x0003)<<6) -#define MCF_DTIM_DTMR_PS(x) (((x)&0x00FF)<<8) -#define MCF_DTIM_DTMR_CE_ANY (0x00C0) -#define MCF_DTIM_DTMR_CE_FALL (0x0080) -#define MCF_DTIM_DTMR_CE_RISE (0x0040) -#define MCF_DTIM_DTMR_CE_NONE (0x0000) -#define MCF_DTIM_DTMR_CLK_DTIN (0x0006) -#define MCF_DTIM_DTMR_CLK_DIV16 (0x0004) -#define MCF_DTIM_DTMR_CLK_DIV1 (0x0002) -#define MCF_DTIM_DTMR_CLK_STOP (0x0000) - -/* Bit definitions and macros for MCF_DTIM_DTXMR */ -#define MCF_DTIM_DTXMR_MODE16 (0x01) -#define MCF_DTIM_DTXMR_DMAEN (0x80) - -/* Bit definitions and macros for MCF_DTIM_DTER */ -#define MCF_DTIM_DTER_CAP (0x01) -#define MCF_DTIM_DTER_REF (0x02) - -/* Bit definitions and macros for MCF_DTIM_DTRR */ -#define MCF_DTIM_DTRR_REF(x) (((x)&0xFFFFFFFF)<<0) - -/* Bit definitions and macros for MCF_DTIM_DTCR */ -#define MCF_DTIM_DTCR_CAP(x) (((x)&0xFFFFFFFF)<<0) - -/* Bit definitions and macros for MCF_DTIM_DTCN */ -#define MCF_DTIM_DTCN_CNT(x) (((x)&0xFFFFFFFF)<<0) - -/********************************************************************* - * * FlexBus Chip Selects (FBCS) * *********************************************************************/ /* Register read/write macros */ -#define MCF_FBCS0_CSAR MCF_REG32(0xFC008000) -#define MCF_FBCS0_CSMR MCF_REG32(0xFC008004) -#define MCF_FBCS0_CSCR MCF_REG32(0xFC008008) -#define MCF_FBCS1_CSAR MCF_REG32(0xFC00800C) -#define MCF_FBCS1_CSMR MCF_REG32(0xFC008010) -#define MCF_FBCS1_CSCR MCF_REG32(0xFC008014) -#define MCF_FBCS2_CSAR MCF_REG32(0xFC008018) -#define MCF_FBCS2_CSMR MCF_REG32(0xFC00801C) -#define MCF_FBCS2_CSCR MCF_REG32(0xFC008020) -#define MCF_FBCS3_CSAR MCF_REG32(0xFC008024) -#define MCF_FBCS3_CSMR MCF_REG32(0xFC008028) -#define MCF_FBCS3_CSCR MCF_REG32(0xFC00802C) -#define MCF_FBCS4_CSAR MCF_REG32(0xFC008030) -#define MCF_FBCS4_CSMR MCF_REG32(0xFC008034) -#define MCF_FBCS4_CSCR MCF_REG32(0xFC008038) -#define MCF_FBCS5_CSAR MCF_REG32(0xFC00803C) -#define MCF_FBCS5_CSMR MCF_REG32(0xFC008040) -#define MCF_FBCS5_CSCR MCF_REG32(0xFC008044) -#define MCF_FBCS_CSAR(x) MCF_REG32(0xFC008000+((x)*0x00C)) -#define MCF_FBCS_CSMR(x) MCF_REG32(0xFC008004+((x)*0x00C)) -#define MCF_FBCS_CSCR(x) MCF_REG32(0xFC008008+((x)*0x00C)) +#define MCF_FBCS0_CSAR 0xFC008000 +#define MCF_FBCS0_CSMR 0xFC008004 +#define MCF_FBCS0_CSCR 0xFC008008 +#define MCF_FBCS1_CSAR 0xFC00800C +#define MCF_FBCS1_CSMR 0xFC008010 +#define MCF_FBCS1_CSCR 0xFC008014 +#define MCF_FBCS2_CSAR 0xFC008018 +#define MCF_FBCS2_CSMR 0xFC00801C +#define MCF_FBCS2_CSCR 0xFC008020 +#define MCF_FBCS3_CSAR 0xFC008024 +#define MCF_FBCS3_CSMR 0xFC008028 +#define MCF_FBCS3_CSCR 0xFC00802C +#define MCF_FBCS4_CSAR 0xFC008030 +#define MCF_FBCS4_CSMR 0xFC008034 +#define MCF_FBCS4_CSCR 0xFC008038 +#define MCF_FBCS5_CSAR 0xFC00803C +#define MCF_FBCS5_CSMR 0xFC008040 +#define MCF_FBCS5_CSCR 0xFC008044 /* Bit definitions and macros for MCF_FBCS_CSAR */ #define MCF_FBCS_CSAR_BA(x) ((x)&0xFFFF0000) @@ -501,32 +386,32 @@ #define MCFGPIO_PCLRR_LCDDATAL (0xFC0A404B) #define MCFGPIO_PCLRR_LCDCTLH (0xFC0A404C) #define MCFGPIO_PCLRR_LCDCTLL (0xFC0A404D) -#define MCF_GPIO_PAR_FEC MCF_REG08(0xFC0A4050) -#define MCF_GPIO_PAR_PWM MCF_REG08(0xFC0A4051) -#define MCF_GPIO_PAR_BUSCTL MCF_REG08(0xFC0A4052) -#define MCF_GPIO_PAR_FECI2C MCF_REG08(0xFC0A4053) -#define MCF_GPIO_PAR_BE MCF_REG08(0xFC0A4054) -#define MCF_GPIO_PAR_CS MCF_REG08(0xFC0A4055) -#define MCF_GPIO_PAR_SSI MCF_REG16(0xFC0A4056) -#define MCF_GPIO_PAR_UART MCF_REG16(0xFC0A4058) -#define MCF_GPIO_PAR_QSPI MCF_REG16(0xFC0A405A) -#define MCF_GPIO_PAR_TIMER MCF_REG08(0xFC0A405C) -#define MCF_GPIO_PAR_LCDDATA MCF_REG08(0xFC0A405D) -#define MCF_GPIO_PAR_LCDCTL MCF_REG16(0xFC0A405E) -#define MCF_GPIO_PAR_IRQ MCF_REG16(0xFC0A4060) -#define MCF_GPIO_MSCR_FLEXBUS MCF_REG08(0xFC0A4064) -#define MCF_GPIO_MSCR_SDRAM MCF_REG08(0xFC0A4065) -#define MCF_GPIO_DSCR_I2C MCF_REG08(0xFC0A4068) -#define MCF_GPIO_DSCR_PWM MCF_REG08(0xFC0A4069) -#define MCF_GPIO_DSCR_FEC MCF_REG08(0xFC0A406A) -#define MCF_GPIO_DSCR_UART MCF_REG08(0xFC0A406B) -#define MCF_GPIO_DSCR_QSPI MCF_REG08(0xFC0A406C) -#define MCF_GPIO_DSCR_TIMER MCF_REG08(0xFC0A406D) -#define MCF_GPIO_DSCR_SSI MCF_REG08(0xFC0A406E) -#define MCF_GPIO_DSCR_LCD MCF_REG08(0xFC0A406F) -#define MCF_GPIO_DSCR_DEBUG MCF_REG08(0xFC0A4070) -#define MCF_GPIO_DSCR_CLKRST MCF_REG08(0xFC0A4071) -#define MCF_GPIO_DSCR_IRQ MCF_REG08(0xFC0A4072) +#define MCFGPIO_PAR_FEC (0xFC0A4050) +#define MCFGPIO_PAR_PWM (0xFC0A4051) +#define MCFGPIO_PAR_BUSCTL (0xFC0A4052) +#define MCFGPIO_PAR_FECI2C (0xFC0A4053) +#define MCFGPIO_PAR_BE (0xFC0A4054) +#define MCFGPIO_PAR_CS (0xFC0A4055) +#define MCFGPIO_PAR_SSI (0xFC0A4056) +#define MCFGPIO_PAR_UART (0xFC0A4058) +#define MCFGPIO_PAR_QSPI (0xFC0A405A) +#define MCFGPIO_PAR_TIMER (0xFC0A405C) +#define MCFGPIO_PAR_LCDDATA (0xFC0A405D) +#define MCFGPIO_PAR_LCDCTL (0xFC0A405E) +#define MCFGPIO_PAR_IRQ (0xFC0A4060) +#define MCFGPIO_MSCR_FLEXBUS (0xFC0A4064) +#define MCFGPIO_MSCR_SDRAM (0xFC0A4065) +#define MCFGPIO_DSCR_I2C (0xFC0A4068) +#define MCFGPIO_DSCR_PWM (0xFC0A4069) +#define MCFGPIO_DSCR_FEC (0xFC0A406A) +#define MCFGPIO_DSCR_UART (0xFC0A406B) +#define MCFGPIO_DSCR_QSPI (0xFC0A406C) +#define MCFGPIO_DSCR_TIMER (0xFC0A406D) +#define MCFGPIO_DSCR_SSI (0xFC0A406E) +#define MCFGPIO_DSCR_LCD (0xFC0A406F) +#define MCFGPIO_DSCR_DEBUG (0xFC0A4070) +#define MCFGPIO_DSCR_CLKRST (0xFC0A4071) +#define MCFGPIO_DSCR_IRQ (0xFC0A4072) /* Bit definitions and macros for MCF_GPIO_PODR_FECH */ #define MCF_GPIO_PODR_FECH_PODR_FECH0 (0x01) @@ -1215,709 +1100,6 @@ #define MCFGPIO_IRQ_MAX 8 #define MCFGPIO_IRQ_VECBASE MCFINT_VECBASE - -/********************************************************************* - * - * Interrupt Controller (INTC) - * - *********************************************************************/ - -/* Register read/write macros */ -#define MCF_INTC0_IPRH MCF_REG32(0xFC048000) -#define MCF_INTC0_IPRL MCF_REG32(0xFC048004) -#define MCF_INTC0_IMRH MCF_REG32(0xFC048008) -#define MCF_INTC0_IMRL MCF_REG32(0xFC04800C) -#define MCF_INTC0_INTFRCH MCF_REG32(0xFC048010) -#define MCF_INTC0_INTFRCL MCF_REG32(0xFC048014) -#define MCF_INTC0_ICONFIG MCF_REG16(0xFC04801A) -#define MCF_INTC0_SIMR MCF_REG08(0xFC04801C) -#define MCF_INTC0_CIMR MCF_REG08(0xFC04801D) -#define MCF_INTC0_CLMASK MCF_REG08(0xFC04801E) -#define MCF_INTC0_SLMASK MCF_REG08(0xFC04801F) -#define MCF_INTC0_ICR0 MCF_REG08(0xFC048040) -#define MCF_INTC0_ICR1 MCF_REG08(0xFC048041) -#define MCF_INTC0_ICR2 MCF_REG08(0xFC048042) -#define MCF_INTC0_ICR3 MCF_REG08(0xFC048043) -#define MCF_INTC0_ICR4 MCF_REG08(0xFC048044) -#define MCF_INTC0_ICR5 MCF_REG08(0xFC048045) -#define MCF_INTC0_ICR6 MCF_REG08(0xFC048046) -#define MCF_INTC0_ICR7 MCF_REG08(0xFC048047) -#define MCF_INTC0_ICR8 MCF_REG08(0xFC048048) -#define MCF_INTC0_ICR9 MCF_REG08(0xFC048049) -#define MCF_INTC0_ICR10 MCF_REG08(0xFC04804A) -#define MCF_INTC0_ICR11 MCF_REG08(0xFC04804B) -#define MCF_INTC0_ICR12 MCF_REG08(0xFC04804C) -#define MCF_INTC0_ICR13 MCF_REG08(0xFC04804D) -#define MCF_INTC0_ICR14 MCF_REG08(0xFC04804E) -#define MCF_INTC0_ICR15 MCF_REG08(0xFC04804F) -#define MCF_INTC0_ICR16 MCF_REG08(0xFC048050) -#define MCF_INTC0_ICR17 MCF_REG08(0xFC048051) -#define MCF_INTC0_ICR18 MCF_REG08(0xFC048052) -#define MCF_INTC0_ICR19 MCF_REG08(0xFC048053) -#define MCF_INTC0_ICR20 MCF_REG08(0xFC048054) -#define MCF_INTC0_ICR21 MCF_REG08(0xFC048055) -#define MCF_INTC0_ICR22 MCF_REG08(0xFC048056) -#define MCF_INTC0_ICR23 MCF_REG08(0xFC048057) -#define MCF_INTC0_ICR24 MCF_REG08(0xFC048058) -#define MCF_INTC0_ICR25 MCF_REG08(0xFC048059) -#define MCF_INTC0_ICR26 MCF_REG08(0xFC04805A) -#define MCF_INTC0_ICR27 MCF_REG08(0xFC04805B) -#define MCF_INTC0_ICR28 MCF_REG08(0xFC04805C) -#define MCF_INTC0_ICR29 MCF_REG08(0xFC04805D) -#define MCF_INTC0_ICR30 MCF_REG08(0xFC04805E) -#define MCF_INTC0_ICR31 MCF_REG08(0xFC04805F) -#define MCF_INTC0_ICR32 MCF_REG08(0xFC048060) -#define MCF_INTC0_ICR33 MCF_REG08(0xFC048061) -#define MCF_INTC0_ICR34 MCF_REG08(0xFC048062) -#define MCF_INTC0_ICR35 MCF_REG08(0xFC048063) -#define MCF_INTC0_ICR36 MCF_REG08(0xFC048064) -#define MCF_INTC0_ICR37 MCF_REG08(0xFC048065) -#define MCF_INTC0_ICR38 MCF_REG08(0xFC048066) -#define MCF_INTC0_ICR39 MCF_REG08(0xFC048067) -#define MCF_INTC0_ICR40 MCF_REG08(0xFC048068) -#define MCF_INTC0_ICR41 MCF_REG08(0xFC048069) -#define MCF_INTC0_ICR42 MCF_REG08(0xFC04806A) -#define MCF_INTC0_ICR43 MCF_REG08(0xFC04806B) -#define MCF_INTC0_ICR44 MCF_REG08(0xFC04806C) -#define MCF_INTC0_ICR45 MCF_REG08(0xFC04806D) -#define MCF_INTC0_ICR46 MCF_REG08(0xFC04806E) -#define MCF_INTC0_ICR47 MCF_REG08(0xFC04806F) -#define MCF_INTC0_ICR48 MCF_REG08(0xFC048070) -#define MCF_INTC0_ICR49 MCF_REG08(0xFC048071) -#define MCF_INTC0_ICR50 MCF_REG08(0xFC048072) -#define MCF_INTC0_ICR51 MCF_REG08(0xFC048073) -#define MCF_INTC0_ICR52 MCF_REG08(0xFC048074) -#define MCF_INTC0_ICR53 MCF_REG08(0xFC048075) -#define MCF_INTC0_ICR54 MCF_REG08(0xFC048076) -#define MCF_INTC0_ICR55 MCF_REG08(0xFC048077) -#define MCF_INTC0_ICR56 MCF_REG08(0xFC048078) -#define MCF_INTC0_ICR57 MCF_REG08(0xFC048079) -#define MCF_INTC0_ICR58 MCF_REG08(0xFC04807A) -#define MCF_INTC0_ICR59 MCF_REG08(0xFC04807B) -#define MCF_INTC0_ICR60 MCF_REG08(0xFC04807C) -#define MCF_INTC0_ICR61 MCF_REG08(0xFC04807D) -#define MCF_INTC0_ICR62 MCF_REG08(0xFC04807E) -#define MCF_INTC0_ICR63 MCF_REG08(0xFC04807F) -#define MCF_INTC0_ICR(x) MCF_REG08(0xFC048040+((x)*0x001)) -#define MCF_INTC0_SWIACK MCF_REG08(0xFC0480E0) -#define MCF_INTC0_L1IACK MCF_REG08(0xFC0480E4) -#define MCF_INTC0_L2IACK MCF_REG08(0xFC0480E8) -#define MCF_INTC0_L3IACK MCF_REG08(0xFC0480EC) -#define MCF_INTC0_L4IACK MCF_REG08(0xFC0480F0) -#define MCF_INTC0_L5IACK MCF_REG08(0xFC0480F4) -#define MCF_INTC0_L6IACK MCF_REG08(0xFC0480F8) -#define MCF_INTC0_L7IACK MCF_REG08(0xFC0480FC) -#define MCF_INTC0_LIACK(x) MCF_REG08(0xFC0480E4+((x)*0x004)) -#define MCF_INTC1_IPRH MCF_REG32(0xFC04C000) -#define MCF_INTC1_IPRL MCF_REG32(0xFC04C004) -#define MCF_INTC1_IMRH MCF_REG32(0xFC04C008) -#define MCF_INTC1_IMRL MCF_REG32(0xFC04C00C) -#define MCF_INTC1_INTFRCH MCF_REG32(0xFC04C010) -#define MCF_INTC1_INTFRCL MCF_REG32(0xFC04C014) -#define MCF_INTC1_ICONFIG MCF_REG16(0xFC04C01A) -#define MCF_INTC1_SIMR MCF_REG08(0xFC04C01C) -#define MCF_INTC1_CIMR MCF_REG08(0xFC04C01D) -#define MCF_INTC1_CLMASK MCF_REG08(0xFC04C01E) -#define MCF_INTC1_SLMASK MCF_REG08(0xFC04C01F) -#define MCF_INTC1_ICR0 MCF_REG08(0xFC04C040) -#define MCF_INTC1_ICR1 MCF_REG08(0xFC04C041) -#define MCF_INTC1_ICR2 MCF_REG08(0xFC04C042) -#define MCF_INTC1_ICR3 MCF_REG08(0xFC04C043) -#define MCF_INTC1_ICR4 MCF_REG08(0xFC04C044) -#define MCF_INTC1_ICR5 MCF_REG08(0xFC04C045) -#define MCF_INTC1_ICR6 MCF_REG08(0xFC04C046) -#define MCF_INTC1_ICR7 MCF_REG08(0xFC04C047) -#define MCF_INTC1_ICR8 MCF_REG08(0xFC04C048) -#define MCF_INTC1_ICR9 MCF_REG08(0xFC04C049) -#define MCF_INTC1_ICR10 MCF_REG08(0xFC04C04A) -#define MCF_INTC1_ICR11 MCF_REG08(0xFC04C04B) -#define MCF_INTC1_ICR12 MCF_REG08(0xFC04C04C) -#define MCF_INTC1_ICR13 MCF_REG08(0xFC04C04D) -#define MCF_INTC1_ICR14 MCF_REG08(0xFC04C04E) -#define MCF_INTC1_ICR15 MCF_REG08(0xFC04C04F) -#define MCF_INTC1_ICR16 MCF_REG08(0xFC04C050) -#define MCF_INTC1_ICR17 MCF_REG08(0xFC04C051) -#define MCF_INTC1_ICR18 MCF_REG08(0xFC04C052) -#define MCF_INTC1_ICR19 MCF_REG08(0xFC04C053) -#define MCF_INTC1_ICR20 MCF_REG08(0xFC04C054) -#define MCF_INTC1_ICR21 MCF_REG08(0xFC04C055) -#define MCF_INTC1_ICR22 MCF_REG08(0xFC04C056) -#define MCF_INTC1_ICR23 MCF_REG08(0xFC04C057) -#define MCF_INTC1_ICR24 MCF_REG08(0xFC04C058) -#define MCF_INTC1_ICR25 MCF_REG08(0xFC04C059) -#define MCF_INTC1_ICR26 MCF_REG08(0xFC04C05A) -#define MCF_INTC1_ICR27 MCF_REG08(0xFC04C05B) -#define MCF_INTC1_ICR28 MCF_REG08(0xFC04C05C) -#define MCF_INTC1_ICR29 MCF_REG08(0xFC04C05D) -#define MCF_INTC1_ICR30 MCF_REG08(0xFC04C05E) -#define MCF_INTC1_ICR31 MCF_REG08(0xFC04C05F) -#define MCF_INTC1_ICR32 MCF_REG08(0xFC04C060) -#define MCF_INTC1_ICR33 MCF_REG08(0xFC04C061) -#define MCF_INTC1_ICR34 MCF_REG08(0xFC04C062) -#define MCF_INTC1_ICR35 MCF_REG08(0xFC04C063) -#define MCF_INTC1_ICR36 MCF_REG08(0xFC04C064) -#define MCF_INTC1_ICR37 MCF_REG08(0xFC04C065) -#define MCF_INTC1_ICR38 MCF_REG08(0xFC04C066) -#define MCF_INTC1_ICR39 MCF_REG08(0xFC04C067) -#define MCF_INTC1_ICR40 MCF_REG08(0xFC04C068) -#define MCF_INTC1_ICR41 MCF_REG08(0xFC04C069) -#define MCF_INTC1_ICR42 MCF_REG08(0xFC04C06A) -#define MCF_INTC1_ICR43 MCF_REG08(0xFC04C06B) -#define MCF_INTC1_ICR44 MCF_REG08(0xFC04C06C) -#define MCF_INTC1_ICR45 MCF_REG08(0xFC04C06D) -#define MCF_INTC1_ICR46 MCF_REG08(0xFC04C06E) -#define MCF_INTC1_ICR47 MCF_REG08(0xFC04C06F) -#define MCF_INTC1_ICR48 MCF_REG08(0xFC04C070) -#define MCF_INTC1_ICR49 MCF_REG08(0xFC04C071) -#define MCF_INTC1_ICR50 MCF_REG08(0xFC04C072) -#define MCF_INTC1_ICR51 MCF_REG08(0xFC04C073) -#define MCF_INTC1_ICR52 MCF_REG08(0xFC04C074) -#define MCF_INTC1_ICR53 MCF_REG08(0xFC04C075) -#define MCF_INTC1_ICR54 MCF_REG08(0xFC04C076) -#define MCF_INTC1_ICR55 MCF_REG08(0xFC04C077) -#define MCF_INTC1_ICR56 MCF_REG08(0xFC04C078) -#define MCF_INTC1_ICR57 MCF_REG08(0xFC04C079) -#define MCF_INTC1_ICR58 MCF_REG08(0xFC04C07A) -#define MCF_INTC1_ICR59 MCF_REG08(0xFC04C07B) -#define MCF_INTC1_ICR60 MCF_REG08(0xFC04C07C) -#define MCF_INTC1_ICR61 MCF_REG08(0xFC04C07D) -#define MCF_INTC1_ICR62 MCF_REG08(0xFC04C07E) -#define MCF_INTC1_ICR63 MCF_REG08(0xFC04C07F) -#define MCF_INTC1_ICR(x) MCF_REG08(0xFC04C040+((x)*0x001)) -#define MCF_INTC1_SWIACK MCF_REG08(0xFC04C0E0) -#define MCF_INTC1_L1IACK MCF_REG08(0xFC04C0E4) -#define MCF_INTC1_L2IACK MCF_REG08(0xFC04C0E8) -#define MCF_INTC1_L3IACK MCF_REG08(0xFC04C0EC) -#define MCF_INTC1_L4IACK MCF_REG08(0xFC04C0F0) -#define MCF_INTC1_L5IACK MCF_REG08(0xFC04C0F4) -#define MCF_INTC1_L6IACK MCF_REG08(0xFC04C0F8) -#define MCF_INTC1_L7IACK MCF_REG08(0xFC04C0FC) -#define MCF_INTC1_LIACK(x) MCF_REG08(0xFC04C0E4+((x)*0x004)) -#define MCF_INTC_IPRH(x) MCF_REG32(0xFC048000+((x)*0x4000)) -#define MCF_INTC_IPRL(x) MCF_REG32(0xFC048004+((x)*0x4000)) -#define MCF_INTC_IMRH(x) MCF_REG32(0xFC048008+((x)*0x4000)) -#define MCF_INTC_IMRL(x) MCF_REG32(0xFC04800C+((x)*0x4000)) -#define MCF_INTC_INTFRCH(x) MCF_REG32(0xFC048010+((x)*0x4000)) -#define MCF_INTC_INTFRCL(x) MCF_REG32(0xFC048014+((x)*0x4000)) -#define MCF_INTC_ICONFIG(x) MCF_REG16(0xFC04801A+((x)*0x4000)) -#define MCF_INTC_SIMR(x) MCF_REG08(0xFC04801C+((x)*0x4000)) -#define MCF_INTC_CIMR(x) MCF_REG08(0xFC04801D+((x)*0x4000)) -#define MCF_INTC_CLMASK(x) MCF_REG08(0xFC04801E+((x)*0x4000)) -#define MCF_INTC_SLMASK(x) MCF_REG08(0xFC04801F+((x)*0x4000)) -#define MCF_INTC_ICR0(x) MCF_REG08(0xFC048040+((x)*0x4000)) -#define MCF_INTC_ICR1(x) MCF_REG08(0xFC048041+((x)*0x4000)) -#define MCF_INTC_ICR2(x) MCF_REG08(0xFC048042+((x)*0x4000)) -#define MCF_INTC_ICR3(x) MCF_REG08(0xFC048043+((x)*0x4000)) -#define MCF_INTC_ICR4(x) MCF_REG08(0xFC048044+((x)*0x4000)) -#define MCF_INTC_ICR5(x) MCF_REG08(0xFC048045+((x)*0x4000)) -#define MCF_INTC_ICR6(x) MCF_REG08(0xFC048046+((x)*0x4000)) -#define MCF_INTC_ICR7(x) MCF_REG08(0xFC048047+((x)*0x4000)) -#define MCF_INTC_ICR8(x) MCF_REG08(0xFC048048+((x)*0x4000)) -#define MCF_INTC_ICR9(x) MCF_REG08(0xFC048049+((x)*0x4000)) -#define MCF_INTC_ICR10(x) MCF_REG08(0xFC04804A+((x)*0x4000)) -#define MCF_INTC_ICR11(x) MCF_REG08(0xFC04804B+((x)*0x4000)) -#define MCF_INTC_ICR12(x) MCF_REG08(0xFC04804C+((x)*0x4000)) -#define MCF_INTC_ICR13(x) MCF_REG08(0xFC04804D+((x)*0x4000)) -#define MCF_INTC_ICR14(x) MCF_REG08(0xFC04804E+((x)*0x4000)) -#define MCF_INTC_ICR15(x) MCF_REG08(0xFC04804F+((x)*0x4000)) -#define MCF_INTC_ICR16(x) MCF_REG08(0xFC048050+((x)*0x4000)) -#define MCF_INTC_ICR17(x) MCF_REG08(0xFC048051+((x)*0x4000)) -#define MCF_INTC_ICR18(x) MCF_REG08(0xFC048052+((x)*0x4000)) -#define MCF_INTC_ICR19(x) MCF_REG08(0xFC048053+((x)*0x4000)) -#define MCF_INTC_ICR20(x) MCF_REG08(0xFC048054+((x)*0x4000)) -#define MCF_INTC_ICR21(x) MCF_REG08(0xFC048055+((x)*0x4000)) -#define MCF_INTC_ICR22(x) MCF_REG08(0xFC048056+((x)*0x4000)) -#define MCF_INTC_ICR23(x) MCF_REG08(0xFC048057+((x)*0x4000)) -#define MCF_INTC_ICR24(x) MCF_REG08(0xFC048058+((x)*0x4000)) -#define MCF_INTC_ICR25(x) MCF_REG08(0xFC048059+((x)*0x4000)) -#define MCF_INTC_ICR26(x) MCF_REG08(0xFC04805A+((x)*0x4000)) -#define MCF_INTC_ICR27(x) MCF_REG08(0xFC04805B+((x)*0x4000)) -#define MCF_INTC_ICR28(x) MCF_REG08(0xFC04805C+((x)*0x4000)) -#define MCF_INTC_ICR29(x) MCF_REG08(0xFC04805D+((x)*0x4000)) -#define MCF_INTC_ICR30(x) MCF_REG08(0xFC04805E+((x)*0x4000)) -#define MCF_INTC_ICR31(x) MCF_REG08(0xFC04805F+((x)*0x4000)) -#define MCF_INTC_ICR32(x) MCF_REG08(0xFC048060+((x)*0x4000)) -#define MCF_INTC_ICR33(x) MCF_REG08(0xFC048061+((x)*0x4000)) -#define MCF_INTC_ICR34(x) MCF_REG08(0xFC048062+((x)*0x4000)) -#define MCF_INTC_ICR35(x) MCF_REG08(0xFC048063+((x)*0x4000)) -#define MCF_INTC_ICR36(x) MCF_REG08(0xFC048064+((x)*0x4000)) -#define MCF_INTC_ICR37(x) MCF_REG08(0xFC048065+((x)*0x4000)) -#define MCF_INTC_ICR38(x) MCF_REG08(0xFC048066+((x)*0x4000)) -#define MCF_INTC_ICR39(x) MCF_REG08(0xFC048067+((x)*0x4000)) -#define MCF_INTC_ICR40(x) MCF_REG08(0xFC048068+((x)*0x4000)) -#define MCF_INTC_ICR41(x) MCF_REG08(0xFC048069+((x)*0x4000)) -#define MCF_INTC_ICR42(x) MCF_REG08(0xFC04806A+((x)*0x4000)) -#define MCF_INTC_ICR43(x) MCF_REG08(0xFC04806B+((x)*0x4000)) -#define MCF_INTC_ICR44(x) MCF_REG08(0xFC04806C+((x)*0x4000)) -#define MCF_INTC_ICR45(x) MCF_REG08(0xFC04806D+((x)*0x4000)) -#define MCF_INTC_ICR46(x) MCF_REG08(0xFC04806E+((x)*0x4000)) -#define MCF_INTC_ICR47(x) MCF_REG08(0xFC04806F+((x)*0x4000)) -#define MCF_INTC_ICR48(x) MCF_REG08(0xFC048070+((x)*0x4000)) -#define MCF_INTC_ICR49(x) MCF_REG08(0xFC048071+((x)*0x4000)) -#define MCF_INTC_ICR50(x) MCF_REG08(0xFC048072+((x)*0x4000)) -#define MCF_INTC_ICR51(x) MCF_REG08(0xFC048073+((x)*0x4000)) -#define MCF_INTC_ICR52(x) MCF_REG08(0xFC048074+((x)*0x4000)) -#define MCF_INTC_ICR53(x) MCF_REG08(0xFC048075+((x)*0x4000)) -#define MCF_INTC_ICR54(x) MCF_REG08(0xFC048076+((x)*0x4000)) -#define MCF_INTC_ICR55(x) MCF_REG08(0xFC048077+((x)*0x4000)) -#define MCF_INTC_ICR56(x) MCF_REG08(0xFC048078+((x)*0x4000)) -#define MCF_INTC_ICR57(x) MCF_REG08(0xFC048079+((x)*0x4000)) -#define MCF_INTC_ICR58(x) MCF_REG08(0xFC04807A+((x)*0x4000)) -#define MCF_INTC_ICR59(x) MCF_REG08(0xFC04807B+((x)*0x4000)) -#define MCF_INTC_ICR60(x) MCF_REG08(0xFC04807C+((x)*0x4000)) -#define MCF_INTC_ICR61(x) MCF_REG08(0xFC04807D+((x)*0x4000)) -#define MCF_INTC_ICR62(x) MCF_REG08(0xFC04807E+((x)*0x4000)) -#define MCF_INTC_ICR63(x) MCF_REG08(0xFC04807F+((x)*0x4000)) -#define MCF_INTC_SWIACK(x) MCF_REG08(0xFC0480E0+((x)*0x4000)) -#define MCF_INTC_L1IACK(x) MCF_REG08(0xFC0480E4+((x)*0x4000)) -#define MCF_INTC_L2IACK(x) MCF_REG08(0xFC0480E8+((x)*0x4000)) -#define MCF_INTC_L3IACK(x) MCF_REG08(0xFC0480EC+((x)*0x4000)) -#define MCF_INTC_L4IACK(x) MCF_REG08(0xFC0480F0+((x)*0x4000)) -#define MCF_INTC_L5IACK(x) MCF_REG08(0xFC0480F4+((x)*0x4000)) -#define MCF_INTC_L6IACK(x) MCF_REG08(0xFC0480F8+((x)*0x4000)) -#define MCF_INTC_L7IACK(x) MCF_REG08(0xFC0480FC+((x)*0x4000)) - -/* Bit definitions and macros for MCF_INTC_IPRH */ -#define MCF_INTC_IPRH_INT32 (0x00000001) -#define MCF_INTC_IPRH_INT33 (0x00000002) -#define MCF_INTC_IPRH_INT34 (0x00000004) -#define MCF_INTC_IPRH_INT35 (0x00000008) -#define MCF_INTC_IPRH_INT36 (0x00000010) -#define MCF_INTC_IPRH_INT37 (0x00000020) -#define MCF_INTC_IPRH_INT38 (0x00000040) -#define MCF_INTC_IPRH_INT39 (0x00000080) -#define MCF_INTC_IPRH_INT40 (0x00000100) -#define MCF_INTC_IPRH_INT41 (0x00000200) -#define MCF_INTC_IPRH_INT42 (0x00000400) -#define MCF_INTC_IPRH_INT43 (0x00000800) -#define MCF_INTC_IPRH_INT44 (0x00001000) -#define MCF_INTC_IPRH_INT45 (0x00002000) -#define MCF_INTC_IPRH_INT46 (0x00004000) -#define MCF_INTC_IPRH_INT47 (0x00008000) -#define MCF_INTC_IPRH_INT48 (0x00010000) -#define MCF_INTC_IPRH_INT49 (0x00020000) -#define MCF_INTC_IPRH_INT50 (0x00040000) -#define MCF_INTC_IPRH_INT51 (0x00080000) -#define MCF_INTC_IPRH_INT52 (0x00100000) -#define MCF_INTC_IPRH_INT53 (0x00200000) -#define MCF_INTC_IPRH_INT54 (0x00400000) -#define MCF_INTC_IPRH_INT55 (0x00800000) -#define MCF_INTC_IPRH_INT56 (0x01000000) -#define MCF_INTC_IPRH_INT57 (0x02000000) -#define MCF_INTC_IPRH_INT58 (0x04000000) -#define MCF_INTC_IPRH_INT59 (0x08000000) -#define MCF_INTC_IPRH_INT60 (0x10000000) -#define MCF_INTC_IPRH_INT61 (0x20000000) -#define MCF_INTC_IPRH_INT62 (0x40000000) -#define MCF_INTC_IPRH_INT63 (0x80000000) - -/* Bit definitions and macros for MCF_INTC_IPRL */ -#define MCF_INTC_IPRL_INT0 (0x00000001) -#define MCF_INTC_IPRL_INT1 (0x00000002) -#define MCF_INTC_IPRL_INT2 (0x00000004) -#define MCF_INTC_IPRL_INT3 (0x00000008) -#define MCF_INTC_IPRL_INT4 (0x00000010) -#define MCF_INTC_IPRL_INT5 (0x00000020) -#define MCF_INTC_IPRL_INT6 (0x00000040) -#define MCF_INTC_IPRL_INT7 (0x00000080) -#define MCF_INTC_IPRL_INT8 (0x00000100) -#define MCF_INTC_IPRL_INT9 (0x00000200) -#define MCF_INTC_IPRL_INT10 (0x00000400) -#define MCF_INTC_IPRL_INT11 (0x00000800) -#define MCF_INTC_IPRL_INT12 (0x00001000) -#define MCF_INTC_IPRL_INT13 (0x00002000) -#define MCF_INTC_IPRL_INT14 (0x00004000) -#define MCF_INTC_IPRL_INT15 (0x00008000) -#define MCF_INTC_IPRL_INT16 (0x00010000) -#define MCF_INTC_IPRL_INT17 (0x00020000) -#define MCF_INTC_IPRL_INT18 (0x00040000) -#define MCF_INTC_IPRL_INT19 (0x00080000) -#define MCF_INTC_IPRL_INT20 (0x00100000) -#define MCF_INTC_IPRL_INT21 (0x00200000) -#define MCF_INTC_IPRL_INT22 (0x00400000) -#define MCF_INTC_IPRL_INT23 (0x00800000) -#define MCF_INTC_IPRL_INT24 (0x01000000) -#define MCF_INTC_IPRL_INT25 (0x02000000) -#define MCF_INTC_IPRL_INT26 (0x04000000) -#define MCF_INTC_IPRL_INT27 (0x08000000) -#define MCF_INTC_IPRL_INT28 (0x10000000) -#define MCF_INTC_IPRL_INT29 (0x20000000) -#define MCF_INTC_IPRL_INT30 (0x40000000) -#define MCF_INTC_IPRL_INT31 (0x80000000) - -/* Bit definitions and macros for MCF_INTC_IMRH */ -#define MCF_INTC_IMRH_INT_MASK32 (0x00000001) -#define MCF_INTC_IMRH_INT_MASK33 (0x00000002) -#define MCF_INTC_IMRH_INT_MASK34 (0x00000004) -#define MCF_INTC_IMRH_INT_MASK35 (0x00000008) -#define MCF_INTC_IMRH_INT_MASK36 (0x00000010) -#define MCF_INTC_IMRH_INT_MASK37 (0x00000020) -#define MCF_INTC_IMRH_INT_MASK38 (0x00000040) -#define MCF_INTC_IMRH_INT_MASK39 (0x00000080) -#define MCF_INTC_IMRH_INT_MASK40 (0x00000100) -#define MCF_INTC_IMRH_INT_MASK41 (0x00000200) -#define MCF_INTC_IMRH_INT_MASK42 (0x00000400) -#define MCF_INTC_IMRH_INT_MASK43 (0x00000800) -#define MCF_INTC_IMRH_INT_MASK44 (0x00001000) -#define MCF_INTC_IMRH_INT_MASK45 (0x00002000) -#define MCF_INTC_IMRH_INT_MASK46 (0x00004000) -#define MCF_INTC_IMRH_INT_MASK47 (0x00008000) -#define MCF_INTC_IMRH_INT_MASK48 (0x00010000) -#define MCF_INTC_IMRH_INT_MASK49 (0x00020000) -#define MCF_INTC_IMRH_INT_MASK50 (0x00040000) -#define MCF_INTC_IMRH_INT_MASK51 (0x00080000) -#define MCF_INTC_IMRH_INT_MASK52 (0x00100000) -#define MCF_INTC_IMRH_INT_MASK53 (0x00200000) -#define MCF_INTC_IMRH_INT_MASK54 (0x00400000) -#define MCF_INTC_IMRH_INT_MASK55 (0x00800000) -#define MCF_INTC_IMRH_INT_MASK56 (0x01000000) -#define MCF_INTC_IMRH_INT_MASK57 (0x02000000) -#define MCF_INTC_IMRH_INT_MASK58 (0x04000000) -#define MCF_INTC_IMRH_INT_MASK59 (0x08000000) -#define MCF_INTC_IMRH_INT_MASK60 (0x10000000) -#define MCF_INTC_IMRH_INT_MASK61 (0x20000000) -#define MCF_INTC_IMRH_INT_MASK62 (0x40000000) -#define MCF_INTC_IMRH_INT_MASK63 (0x80000000) - -/* Bit definitions and macros for MCF_INTC_IMRL */ -#define MCF_INTC_IMRL_INT_MASK0 (0x00000001) -#define MCF_INTC_IMRL_INT_MASK1 (0x00000002) -#define MCF_INTC_IMRL_INT_MASK2 (0x00000004) -#define MCF_INTC_IMRL_INT_MASK3 (0x00000008) -#define MCF_INTC_IMRL_INT_MASK4 (0x00000010) -#define MCF_INTC_IMRL_INT_MASK5 (0x00000020) -#define MCF_INTC_IMRL_INT_MASK6 (0x00000040) -#define MCF_INTC_IMRL_INT_MASK7 (0x00000080) -#define MCF_INTC_IMRL_INT_MASK8 (0x00000100) -#define MCF_INTC_IMRL_INT_MASK9 (0x00000200) -#define MCF_INTC_IMRL_INT_MASK10 (0x00000400) -#define MCF_INTC_IMRL_INT_MASK11 (0x00000800) -#define MCF_INTC_IMRL_INT_MASK12 (0x00001000) -#define MCF_INTC_IMRL_INT_MASK13 (0x00002000) -#define MCF_INTC_IMRL_INT_MASK14 (0x00004000) -#define MCF_INTC_IMRL_INT_MASK15 (0x00008000) -#define MCF_INTC_IMRL_INT_MASK16 (0x00010000) -#define MCF_INTC_IMRL_INT_MASK17 (0x00020000) -#define MCF_INTC_IMRL_INT_MASK18 (0x00040000) -#define MCF_INTC_IMRL_INT_MASK19 (0x00080000) -#define MCF_INTC_IMRL_INT_MASK20 (0x00100000) -#define MCF_INTC_IMRL_INT_MASK21 (0x00200000) -#define MCF_INTC_IMRL_INT_MASK22 (0x00400000) -#define MCF_INTC_IMRL_INT_MASK23 (0x00800000) -#define MCF_INTC_IMRL_INT_MASK24 (0x01000000) -#define MCF_INTC_IMRL_INT_MASK25 (0x02000000) -#define MCF_INTC_IMRL_INT_MASK26 (0x04000000) -#define MCF_INTC_IMRL_INT_MASK27 (0x08000000) -#define MCF_INTC_IMRL_INT_MASK28 (0x10000000) -#define MCF_INTC_IMRL_INT_MASK29 (0x20000000) -#define MCF_INTC_IMRL_INT_MASK30 (0x40000000) -#define MCF_INTC_IMRL_INT_MASK31 (0x80000000) - -/* Bit definitions and macros for MCF_INTC_INTFRCH */ -#define MCF_INTC_INTFRCH_INTFRC32 (0x00000001) -#define MCF_INTC_INTFRCH_INTFRC33 (0x00000002) -#define MCF_INTC_INTFRCH_INTFRC34 (0x00000004) -#define MCF_INTC_INTFRCH_INTFRC35 (0x00000008) -#define MCF_INTC_INTFRCH_INTFRC36 (0x00000010) -#define MCF_INTC_INTFRCH_INTFRC37 (0x00000020) -#define MCF_INTC_INTFRCH_INTFRC38 (0x00000040) -#define MCF_INTC_INTFRCH_INTFRC39 (0x00000080) -#define MCF_INTC_INTFRCH_INTFRC40 (0x00000100) -#define MCF_INTC_INTFRCH_INTFRC41 (0x00000200) -#define MCF_INTC_INTFRCH_INTFRC42 (0x00000400) -#define MCF_INTC_INTFRCH_INTFRC43 (0x00000800) -#define MCF_INTC_INTFRCH_INTFRC44 (0x00001000) -#define MCF_INTC_INTFRCH_INTFRC45 (0x00002000) -#define MCF_INTC_INTFRCH_INTFRC46 (0x00004000) -#define MCF_INTC_INTFRCH_INTFRC47 (0x00008000) -#define MCF_INTC_INTFRCH_INTFRC48 (0x00010000) -#define MCF_INTC_INTFRCH_INTFRC49 (0x00020000) -#define MCF_INTC_INTFRCH_INTFRC50 (0x00040000) -#define MCF_INTC_INTFRCH_INTFRC51 (0x00080000) -#define MCF_INTC_INTFRCH_INTFRC52 (0x00100000) -#define MCF_INTC_INTFRCH_INTFRC53 (0x00200000) -#define MCF_INTC_INTFRCH_INTFRC54 (0x00400000) -#define MCF_INTC_INTFRCH_INTFRC55 (0x00800000) -#define MCF_INTC_INTFRCH_INTFRC56 (0x01000000) -#define MCF_INTC_INTFRCH_INTFRC57 (0x02000000) -#define MCF_INTC_INTFRCH_INTFRC58 (0x04000000) -#define MCF_INTC_INTFRCH_INTFRC59 (0x08000000) -#define MCF_INTC_INTFRCH_INTFRC60 (0x10000000) -#define MCF_INTC_INTFRCH_INTFRC61 (0x20000000) -#define MCF_INTC_INTFRCH_INTFRC62 (0x40000000) -#define MCF_INTC_INTFRCH_INTFRC63 (0x80000000) - -/* Bit definitions and macros for MCF_INTC_INTFRCL */ -#define MCF_INTC_INTFRCL_INTFRC0 (0x00000001) -#define MCF_INTC_INTFRCL_INTFRC1 (0x00000002) -#define MCF_INTC_INTFRCL_INTFRC2 (0x00000004) -#define MCF_INTC_INTFRCL_INTFRC3 (0x00000008) -#define MCF_INTC_INTFRCL_INTFRC4 (0x00000010) -#define MCF_INTC_INTFRCL_INTFRC5 (0x00000020) -#define MCF_INTC_INTFRCL_INTFRC6 (0x00000040) -#define MCF_INTC_INTFRCL_INTFRC7 (0x00000080) -#define MCF_INTC_INTFRCL_INTFRC8 (0x00000100) -#define MCF_INTC_INTFRCL_INTFRC9 (0x00000200) -#define MCF_INTC_INTFRCL_INTFRC10 (0x00000400) -#define MCF_INTC_INTFRCL_INTFRC11 (0x00000800) -#define MCF_INTC_INTFRCL_INTFRC12 (0x00001000) -#define MCF_INTC_INTFRCL_INTFRC13 (0x00002000) -#define MCF_INTC_INTFRCL_INTFRC14 (0x00004000) -#define MCF_INTC_INTFRCL_INTFRC15 (0x00008000) -#define MCF_INTC_INTFRCL_INTFRC16 (0x00010000) -#define MCF_INTC_INTFRCL_INTFRC17 (0x00020000) -#define MCF_INTC_INTFRCL_INTFRC18 (0x00040000) -#define MCF_INTC_INTFRCL_INTFRC19 (0x00080000) -#define MCF_INTC_INTFRCL_INTFRC20 (0x00100000) -#define MCF_INTC_INTFRCL_INTFRC21 (0x00200000) -#define MCF_INTC_INTFRCL_INTFRC22 (0x00400000) -#define MCF_INTC_INTFRCL_INTFRC23 (0x00800000) -#define MCF_INTC_INTFRCL_INTFRC24 (0x01000000) -#define MCF_INTC_INTFRCL_INTFRC25 (0x02000000) -#define MCF_INTC_INTFRCL_INTFRC26 (0x04000000) -#define MCF_INTC_INTFRCL_INTFRC27 (0x08000000) -#define MCF_INTC_INTFRCL_INTFRC28 (0x10000000) -#define MCF_INTC_INTFRCL_INTFRC29 (0x20000000) -#define MCF_INTC_INTFRCL_INTFRC30 (0x40000000) -#define MCF_INTC_INTFRCL_INTFRC31 (0x80000000) - -/* Bit definitions and macros for MCF_INTC_ICONFIG */ -#define MCF_INTC_ICONFIG_EMASK (0x0020) -#define MCF_INTC_ICONFIG_ELVLPRI1 (0x0200) -#define MCF_INTC_ICONFIG_ELVLPRI2 (0x0400) -#define MCF_INTC_ICONFIG_ELVLPRI3 (0x0800) -#define MCF_INTC_ICONFIG_ELVLPRI4 (0x1000) -#define MCF_INTC_ICONFIG_ELVLPRI5 (0x2000) -#define MCF_INTC_ICONFIG_ELVLPRI6 (0x4000) -#define MCF_INTC_ICONFIG_ELVLPRI7 (0x8000) - -/* Bit definitions and macros for MCF_INTC_SIMR */ -#define MCF_INTC_SIMR_SIMR(x) (((x)&0x7F)<<0) - -/* Bit definitions and macros for MCF_INTC_CIMR */ -#define MCF_INTC_CIMR_CIMR(x) (((x)&0x7F)<<0) - -/* Bit definitions and macros for MCF_INTC_CLMASK */ -#define MCF_INTC_CLMASK_CLMASK(x) (((x)&0x0F)<<0) - -/* Bit definitions and macros for MCF_INTC_SLMASK */ -#define MCF_INTC_SLMASK_SLMASK(x) (((x)&0x0F)<<0) - -/* Bit definitions and macros for MCF_INTC_ICR */ -#define MCF_INTC_ICR_IL(x) (((x)&0x07)<<0) - -/* Bit definitions and macros for MCF_INTC_SWIACK */ -#define MCF_INTC_SWIACK_VECTOR(x) (((x)&0xFF)<<0) - -/* Bit definitions and macros for MCF_INTC_LIACK */ -#define MCF_INTC_LIACK_VECTOR(x) (((x)&0xFF)<<0) - -/********************************************************************/ -/********************************************************************* -* -* LCD Controller (LCDC) -* -*********************************************************************/ - -/* Register read/write macros */ -#define MCF_LCDC_LSSAR MCF_REG32(0xFC0AC000) -#define MCF_LCDC_LSR MCF_REG32(0xFC0AC004) -#define MCF_LCDC_LVPWR MCF_REG32(0xFC0AC008) -#define MCF_LCDC_LCPR MCF_REG32(0xFC0AC00C) -#define MCF_LCDC_LCWHBR MCF_REG32(0xFC0AC010) -#define MCF_LCDC_LCCMR MCF_REG32(0xFC0AC014) -#define MCF_LCDC_LPCR MCF_REG32(0xFC0AC018) -#define MCF_LCDC_LHCR MCF_REG32(0xFC0AC01C) -#define MCF_LCDC_LVCR MCF_REG32(0xFC0AC020) -#define MCF_LCDC_LPOR MCF_REG32(0xFC0AC024) -#define MCF_LCDC_LSCR MCF_REG32(0xFC0AC028) -#define MCF_LCDC_LPCCR MCF_REG32(0xFC0AC02C) -#define MCF_LCDC_LDCR MCF_REG32(0xFC0AC030) -#define MCF_LCDC_LRMCR MCF_REG32(0xFC0AC034) -#define MCF_LCDC_LICR MCF_REG32(0xFC0AC038) -#define MCF_LCDC_LIER MCF_REG32(0xFC0AC03C) -#define MCF_LCDC_LISR MCF_REG32(0xFC0AC040) -#define MCF_LCDC_LGWSAR MCF_REG32(0xFC0AC050) -#define MCF_LCDC_LGWSR MCF_REG32(0xFC0AC054) -#define MCF_LCDC_LGWVPWR MCF_REG32(0xFC0AC058) -#define MCF_LCDC_LGWPOR MCF_REG32(0xFC0AC05C) -#define MCF_LCDC_LGWPR MCF_REG32(0xFC0AC060) -#define MCF_LCDC_LGWCR MCF_REG32(0xFC0AC064) -#define MCF_LCDC_LGWDCR MCF_REG32(0xFC0AC068) -#define MCF_LCDC_BPLUT_BASE MCF_REG32(0xFC0AC800) -#define MCF_LCDC_GWLUT_BASE MCF_REG32(0xFC0ACC00) - -/* Bit definitions and macros for MCF_LCDC_LSSAR */ -#define MCF_LCDC_LSSAR_SSA(x) (((x)&0x3FFFFFFF)<<2) - -/* Bit definitions and macros for MCF_LCDC_LSR */ -#define MCF_LCDC_LSR_YMAX(x) (((x)&0x000003FF)<<0) -#define MCF_LCDC_LSR_XMAX(x) (((x)&0x0000003F)<<20) - -/* Bit definitions and macros for MCF_LCDC_LVPWR */ -#define MCF_LCDC_LVPWR_VPW(x) (((x)&0x000003FF)<<0) - -/* Bit definitions and macros for MCF_LCDC_LCPR */ -#define MCF_LCDC_LCPR_CYP(x) (((x)&0x000003FF)<<0) -#define MCF_LCDC_LCPR_CXP(x) (((x)&0x000003FF)<<16) -#define MCF_LCDC_LCPR_OP (0x10000000) -#define MCF_LCDC_LCPR_CC(x) (((x)&0x00000003)<<30) -#define MCF_LCDC_LCPR_CC_TRANSPARENT (0x00000000) -#define MCF_LCDC_LCPR_CC_OR (0x40000000) -#define MCF_LCDC_LCPR_CC_XOR (0x80000000) -#define MCF_LCDC_LCPR_CC_AND (0xC0000000) -#define MCF_LCDC_LCPR_OP_ON (0x10000000) -#define MCF_LCDC_LCPR_OP_OFF (0x00000000) - -/* Bit definitions and macros for MCF_LCDC_LCWHBR */ -#define MCF_LCDC_LCWHBR_BD(x) (((x)&0x000000FF)<<0) -#define MCF_LCDC_LCWHBR_CH(x) (((x)&0x0000001F)<<16) -#define MCF_LCDC_LCWHBR_CW(x) (((x)&0x0000001F)<<24) -#define MCF_LCDC_LCWHBR_BK_EN (0x80000000) -#define MCF_LCDC_LCWHBR_BK_EN_ON (0x80000000) -#define MCF_LCDC_LCWHBR_BK_EN_OFF (0x00000000) - -/* Bit definitions and macros for MCF_LCDC_LCCMR */ -#define MCF_LCDC_LCCMR_CUR_COL_B(x) (((x)&0x0000003F)<<0) -#define MCF_LCDC_LCCMR_CUR_COL_G(x) (((x)&0x0000003F)<<6) -#define MCF_LCDC_LCCMR_CUR_COL_R(x) (((x)&0x0000003F)<<12) - -/* Bit definitions and macros for MCF_LCDC_LPCR */ -#define MCF_LCDC_LPCR_PCD(x) (((x)&0x0000003F)<<0) -#define MCF_LCDC_LPCR_SHARP (0x00000040) -#define MCF_LCDC_LPCR_SCLKSEL (0x00000080) -#define MCF_LCDC_LPCR_ACD(x) (((x)&0x0000007F)<<8) -#define MCF_LCDC_LPCR_ACDSEL (0x00008000) -#define MCF_LCDC_LPCR_REV_VS (0x00010000) -#define MCF_LCDC_LPCR_SWAP_SEL (0x00020000) -#define MCF_LCDC_LPCR_ENDSEL (0x00040000) -#define MCF_LCDC_LPCR_SCLKIDLE (0x00080000) -#define MCF_LCDC_LPCR_OEPOL (0x00100000) -#define MCF_LCDC_LPCR_CLKPOL (0x00200000) -#define MCF_LCDC_LPCR_LPPOL (0x00400000) -#define MCF_LCDC_LPCR_FLM (0x00800000) -#define MCF_LCDC_LPCR_PIXPOL (0x01000000) -#define MCF_LCDC_LPCR_BPIX(x) (((x)&0x00000007)<<25) -#define MCF_LCDC_LPCR_PBSIZ(x) (((x)&0x00000003)<<28) -#define MCF_LCDC_LPCR_COLOR (0x40000000) -#define MCF_LCDC_LPCR_TFT (0x80000000) -#define MCF_LCDC_LPCR_MODE_MONOCGROME (0x00000000) -#define MCF_LCDC_LPCR_MODE_CSTN (0x40000000) -#define MCF_LCDC_LPCR_MODE_TFT (0xC0000000) -#define MCF_LCDC_LPCR_PBSIZ_1 (0x00000000) -#define MCF_LCDC_LPCR_PBSIZ_2 (0x10000000) -#define MCF_LCDC_LPCR_PBSIZ_4 (0x20000000) -#define MCF_LCDC_LPCR_PBSIZ_8 (0x30000000) -#define MCF_LCDC_LPCR_BPIX_1bpp (0x00000000) -#define MCF_LCDC_LPCR_BPIX_2bpp (0x02000000) -#define MCF_LCDC_LPCR_BPIX_4bpp (0x04000000) -#define MCF_LCDC_LPCR_BPIX_8bpp (0x06000000) -#define MCF_LCDC_LPCR_BPIX_12bpp (0x08000000) -#define MCF_LCDC_LPCR_BPIX_16bpp (0x0A000000) -#define MCF_LCDC_LPCR_BPIX_18bpp (0x0C000000) - -#define MCF_LCDC_LPCR_PANEL_TYPE(x) (((x)&0x00000003)<<30) - -/* Bit definitions and macros for MCF_LCDC_LHCR */ -#define MCF_LCDC_LHCR_H_WAIT_2(x) (((x)&0x000000FF)<<0) -#define MCF_LCDC_LHCR_H_WAIT_1(x) (((x)&0x000000FF)<<8) -#define MCF_LCDC_LHCR_H_WIDTH(x) (((x)&0x0000003F)<<26) - -/* Bit definitions and macros for MCF_LCDC_LVCR */ -#define MCF_LCDC_LVCR_V_WAIT_2(x) (((x)&0x000000FF)<<0) -#define MCF_LCDC_LVCR_V_WAIT_1(x) (((x)&0x000000FF)<<8) -#define MCF_LCDC_LVCR_V_WIDTH(x) (((x)&0x0000003F)<<26) - -/* Bit definitions and macros for MCF_LCDC_LPOR */ -#define MCF_LCDC_LPOR_POS(x) (((x)&0x0000001F)<<0) - -/* Bit definitions and macros for MCF_LCDC_LPCCR */ -#define MCF_LCDC_LPCCR_PW(x) (((x)&0x000000FF)<<0) -#define MCF_LCDC_LPCCR_CC_EN (0x00000100) -#define MCF_LCDC_LPCCR_SCR(x) (((x)&0x00000003)<<9) -#define MCF_LCDC_LPCCR_LDMSK (0x00008000) -#define MCF_LCDC_LPCCR_CLS_HI_WIDTH(x) (((x)&0x000001FF)<<16) -#define MCF_LCDC_LPCCR_SCR_LINEPULSE (0x00000000) -#define MCF_LCDC_LPCCR_SCR_PIXELCLK (0x00002000) -#define MCF_LCDC_LPCCR_SCR_LCDCLOCK (0x00004000) - -/* Bit definitions and macros for MCF_LCDC_LDCR */ -#define MCF_LCDC_LDCR_TM(x) (((x)&0x0000001F)<<0) -#define MCF_LCDC_LDCR_HM(x) (((x)&0x0000001F)<<16) -#define MCF_LCDC_LDCR_BURST (0x80000000) - -/* Bit definitions and macros for MCF_LCDC_LRMCR */ -#define MCF_LCDC_LRMCR_SEL_REF (0x00000001) - -/* Bit definitions and macros for MCF_LCDC_LICR */ -#define MCF_LCDC_LICR_INTCON (0x00000001) -#define MCF_LCDC_LICR_INTSYN (0x00000004) -#define MCF_LCDC_LICR_GW_INT_CON (0x00000010) - -/* Bit definitions and macros for MCF_LCDC_LIER */ -#define MCF_LCDC_LIER_BOF_EN (0x00000001) -#define MCF_LCDC_LIER_EOF_EN (0x00000002) -#define MCF_LCDC_LIER_ERR_RES_EN (0x00000004) -#define MCF_LCDC_LIER_UDR_ERR_EN (0x00000008) -#define MCF_LCDC_LIER_GW_BOF_EN (0x00000010) -#define MCF_LCDC_LIER_GW_EOF_EN (0x00000020) -#define MCF_LCDC_LIER_GW_ERR_RES_EN (0x00000040) -#define MCF_LCDC_LIER_GW_UDR_ERR_EN (0x00000080) - -/* Bit definitions and macros for MCF_LCDC_LISR */ -#define MCF_LCDC_LISR_BOF (0x00000001) -#define MCF_LCDC_LISR_EOF (0x00000002) -#define MCF_LCDC_LISR_ERR_RES (0x00000004) -#define MCF_LCDC_LISR_UDR_ERR (0x00000008) -#define MCF_LCDC_LISR_GW_BOF (0x00000010) -#define MCF_LCDC_LISR_GW_EOF (0x00000020) -#define MCF_LCDC_LISR_GW_ERR_RES (0x00000040) -#define MCF_LCDC_LISR_GW_UDR_ERR (0x00000080) - -/* Bit definitions and macros for MCF_LCDC_LGWSAR */ -#define MCF_LCDC_LGWSAR_GWSA(x) (((x)&0x3FFFFFFF)<<2) - -/* Bit definitions and macros for MCF_LCDC_LGWSR */ -#define MCF_LCDC_LGWSR_GWH(x) (((x)&0x000003FF)<<0) -#define MCF_LCDC_LGWSR_GWW(x) (((x)&0x0000003F)<<20) - -/* Bit definitions and macros for MCF_LCDC_LGWVPWR */ -#define MCF_LCDC_LGWVPWR_GWVPW(x) (((x)&0x000003FF)<<0) - -/* Bit definitions and macros for MCF_LCDC_LGWPOR */ -#define MCF_LCDC_LGWPOR_GWPO(x) (((x)&0x0000001F)<<0) - -/* Bit definitions and macros for MCF_LCDC_LGWPR */ -#define MCF_LCDC_LGWPR_GWYP(x) (((x)&0x000003FF)<<0) -#define MCF_LCDC_LGWPR_GWXP(x) (((x)&0x000003FF)<<16) - -/* Bit definitions and macros for MCF_LCDC_LGWCR */ -#define MCF_LCDC_LGWCR_GWCKB(x) (((x)&0x0000003F)<<0) -#define MCF_LCDC_LGWCR_GWCKG(x) (((x)&0x0000003F)<<6) -#define MCF_LCDC_LGWCR_GWCKR(x) (((x)&0x0000003F)<<12) -#define MCF_LCDC_LGWCR_GW_RVS (0x00200000) -#define MCF_LCDC_LGWCR_GWE (0x00400000) -#define MCF_LCDC_LGWCR_GWCKE (0x00800000) -#define MCF_LCDC_LGWCR_GWAV(x) (((x)&0x000000FF)<<24) - -/* Bit definitions and macros for MCF_LCDC_LGWDCR */ -#define MCF_LCDC_LGWDCR_GWTM(x) (((x)&0x0000001F)<<0) -#define MCF_LCDC_LGWDCR_GWHM(x) (((x)&0x0000001F)<<16) -#define MCF_LCDC_LGWDCR_GWBT (0x80000000) - -/* Bit definitions and macros for MCF_LCDC_LSCR */ -#define MCF_LCDC_LSCR_PS_RISE_DELAY(x) (((x)&0x0000003F)<<26) -#define MCF_LCDC_LSCR_CLS_RISE_DELAY(x) (((x)&0x000000FF)<<16) -#define MCF_LCDC_LSCR_REV_TOGGLE_DELAY(x) (((x)&0x0000000F)<<8) -#define MCF_LCDC_LSCR_GRAY_2(x) (((x)&0x0000000F)<<4) -#define MCF_LCDC_LSCR_GRAY_1(x) (((x)&0x0000000F)<<0) - -/* Bit definitions and macros for MCF_LCDC_BPLUT_BASE */ -#define MCF_LCDC_BPLUT_BASE_BASE(x) (((x)&0xFFFFFFFF)<<0) - -/* Bit definitions and macros for MCF_LCDC_GWLUT_BASE */ -#define MCF_LCDC_GWLUT_BASE_BASE(x) (((x)&0xFFFFFFFF)<<0) - /********************************************************************* * * Phase Locked Loop (PLL) @@ -1925,10 +1107,10 @@ *********************************************************************/ /* Register read/write macros */ -#define MCF_PLL_PODR MCF_REG08(0xFC0C0000) -#define MCF_PLL_PLLCR MCF_REG08(0xFC0C0004) -#define MCF_PLL_PMDR MCF_REG08(0xFC0C0008) -#define MCF_PLL_PFDR MCF_REG08(0xFC0C000C) +#define MCF_PLL_PODR 0xFC0C0000 +#define MCF_PLL_PLLCR 0xFC0C0004 +#define MCF_PLL_PMDR 0xFC0C0008 +#define MCF_PLL_PFDR 0xFC0C000C /* Bit definitions and macros for MCF_PLL_PODR */ #define MCF_PLL_PODR_BUSDIV(x) (((x)&0x0F)<<0) @@ -1951,15 +1133,15 @@ *********************************************************************/ /* Register read/write macros */ -#define MCF_SCM_MPR MCF_REG32(0xFC000000) -#define MCF_SCM_PACRA MCF_REG32(0xFC000020) -#define MCF_SCM_PACRB MCF_REG32(0xFC000024) -#define MCF_SCM_PACRC MCF_REG32(0xFC000028) -#define MCF_SCM_PACRD MCF_REG32(0xFC00002C) -#define MCF_SCM_PACRE MCF_REG32(0xFC000040) -#define MCF_SCM_PACRF MCF_REG32(0xFC000044) +#define MCF_SCM_MPR 0xFC000000 +#define MCF_SCM_PACRA 0xFC000020 +#define MCF_SCM_PACRB 0xFC000024 +#define MCF_SCM_PACRC 0xFC000028 +#define MCF_SCM_PACRD 0xFC00002C +#define MCF_SCM_PACRE 0xFC000040 +#define MCF_SCM_PACRF 0xFC000044 -#define MCF_SCM_BCR MCF_REG32(0xFC040024) +#define MCF_SCM_BCR 0xFC040024 /********************************************************************* * @@ -1968,17 +1150,16 @@ *********************************************************************/ /* Register read/write macros */ -#define MCF_SDRAMC_SDMR MCF_REG32(0xFC0B8000) -#define MCF_SDRAMC_SDCR MCF_REG32(0xFC0B8004) -#define MCF_SDRAMC_SDCFG1 MCF_REG32(0xFC0B8008) -#define MCF_SDRAMC_SDCFG2 MCF_REG32(0xFC0B800C) -#define MCF_SDRAMC_LIMP_FIX MCF_REG32(0xFC0B8080) -#define MCF_SDRAMC_SDDS MCF_REG32(0xFC0B8100) -#define MCF_SDRAMC_SDCS0 MCF_REG32(0xFC0B8110) -#define MCF_SDRAMC_SDCS1 MCF_REG32(0xFC0B8114) -#define MCF_SDRAMC_SDCS2 MCF_REG32(0xFC0B8118) -#define MCF_SDRAMC_SDCS3 MCF_REG32(0xFC0B811C) -#define MCF_SDRAMC_SDCS(x) MCF_REG32(0xFC0B8110+((x)*0x004)) +#define MCF_SDRAMC_SDMR 0xFC0B8000 +#define MCF_SDRAMC_SDCR 0xFC0B8004 +#define MCF_SDRAMC_SDCFG1 0xFC0B8008 +#define MCF_SDRAMC_SDCFG2 0xFC0B800C +#define MCF_SDRAMC_LIMP_FIX 0xFC0B8080 +#define MCF_SDRAMC_SDDS 0xFC0B8100 +#define MCF_SDRAMC_SDCS0 0xFC0B8110 +#define MCF_SDRAMC_SDCS1 0xFC0B8114 +#define MCF_SDRAMC_SDCS2 0xFC0B8118 +#define MCF_SDRAMC_SDCS3 0xFC0B811C /* Bit definitions and macros for MCF_SDRAMC_SDMR */ #define MCF_SDRAMC_SDMR_CMD (0x00010000) @@ -2046,143 +1227,9 @@ #define MCF_SDRAMC_SDCS_CSSZ_2GBYTE (0x0000001E) #define MCF_SDRAMC_SDCS_CSSZ_4GBYTE (0x0000001F) -/********************************************************************* - * - * FlexCAN module registers - * - *********************************************************************/ -#define MCF_FLEXCAN_BASEADDR(x) (0xFC020000+(x)*0x0800) -#define MCF_FLEXCAN_CANMCR(x) MCF_REG32(0xFC020000+(x)*0x0800+0x00) -#define MCF_FLEXCAN_CANCTRL(x) MCF_REG32(0xFC020000+(x)*0x0800+0x04) -#define MCF_FLEXCAN_TIMER(x) MCF_REG32(0xFC020000+(x)*0x0800+0x08) -#define MCF_FLEXCAN_RXGMASK(x) MCF_REG32(0xFC020000+(x)*0x0800+0x10) -#define MCF_FLEXCAN_RX14MASK(x) MCF_REG32(0xFC020000+(x)*0x0800+0x14) -#define MCF_FLEXCAN_RX15MASK(x) MCF_REG32(0xFC020000+(x)*0x0800+0x18) -#define MCF_FLEXCAN_ERRCNT(x) MCF_REG32(0xFC020000+(x)*0x0800+0x1C) -#define MCF_FLEXCAN_ERRSTAT(x) MCF_REG32(0xFC020000+(x)*0x0800+0x20) -#define MCF_FLEXCAN_IMASK(x) MCF_REG32(0xFC020000+(x)*0x0800+0x28) -#define MCF_FLEXCAN_IFLAG(x) MCF_REG32(0xFC020000+(x)*0x0800+0x30) - -#define MCF_FLEXCAN_MB_CNT(x,y) MCF_REG32(0xFC020080+(x)*0x0800+(y)*0x10+0x0) -#define MCF_FLEXCAN_MB_ID(x,y) MCF_REG32(0xFC020080+(x)*0x0800+(y)*0x10+0x4) -#define MCF_FLEXCAN_MB_DB(x,y,z) MCF_REG08(0xFC020080+(x)*0x0800+(y)*0x10+0x8+(z)*0x1) - -/* - * FlexCAN Module Configuration Register - */ -#define CANMCR_MDIS (0x80000000) -#define CANMCR_FRZ (0x40000000) -#define CANMCR_HALT (0x10000000) -#define CANMCR_SOFTRST (0x02000000) -#define CANMCR_FRZACK (0x01000000) -#define CANMCR_SUPV (0x00800000) -#define CANMCR_MAXMB(x) ((x)&0x0F) - -/* - * FlexCAN Control Register - */ -#define CANCTRL_PRESDIV(x) (((x)&0xFF)<<24) -#define CANCTRL_RJW(x) (((x)&0x03)<<22) -#define CANCTRL_PSEG1(x) (((x)&0x07)<<19) -#define CANCTRL_PSEG2(x) (((x)&0x07)<<16) -#define CANCTRL_BOFFMSK (0x00008000) -#define CANCTRL_ERRMSK (0x00004000) -#define CANCTRL_CLKSRC (0x00002000) -#define CANCTRL_LPB (0x00001000) -#define CANCTRL_SAMP (0x00000080) -#define CANCTRL_BOFFREC (0x00000040) -#define CANCTRL_TSYNC (0x00000020) -#define CANCTRL_LBUF (0x00000010) -#define CANCTRL_LOM (0x00000008) -#define CANCTRL_PROPSEG(x) ((x)&0x07) - -/* - * FlexCAN Error Counter Register - */ -#define ERRCNT_RXECTR(x) (((x)&0xFF)<<8) -#define ERRCNT_TXECTR(x) ((x)&0xFF) - -/* - * FlexCAN Error and Status Register - */ -#define ERRSTAT_BITERR(x) (((x)&0x03)<<14) -#define ERRSTAT_ACKERR (0x00002000) -#define ERRSTAT_CRCERR (0x00001000) -#define ERRSTAT_FRMERR (0x00000800) -#define ERRSTAT_STFERR (0x00000400) -#define ERRSTAT_TXWRN (0x00000200) -#define ERRSTAT_RXWRN (0x00000100) -#define ERRSTAT_IDLE (0x00000080) -#define ERRSTAT_TXRX (0x00000040) -#define ERRSTAT_FLTCONF(x) (((x)&0x03)<<4) -#define ERRSTAT_BOFFINT (0x00000004) -#define ERRSTAT_ERRINT (0x00000002) - /* - * Interrupt Mask Register - */ -#define IMASK_BUF15M (0x8000) -#define IMASK_BUF14M (0x4000) -#define IMASK_BUF13M (0x2000) -#define IMASK_BUF12M (0x1000) -#define IMASK_BUF11M (0x0800) -#define IMASK_BUF10M (0x0400) -#define IMASK_BUF9M (0x0200) -#define IMASK_BUF8M (0x0100) -#define IMASK_BUF7M (0x0080) -#define IMASK_BUF6M (0x0040) -#define IMASK_BUF5M (0x0020) -#define IMASK_BUF4M (0x0010) -#define IMASK_BUF3M (0x0008) -#define IMASK_BUF2M (0x0004) -#define IMASK_BUF1M (0x0002) -#define IMASK_BUF0M (0x0001) -#define IMASK_BUFnM(x) (0x1<<(x)) -#define IMASK_BUFF_ENABLE_ALL (0x1111) -#define IMASK_BUFF_DISABLE_ALL (0x0000) - -/* - * Interrupt Flag Register - */ -#define IFLAG_BUF15M (0x8000) -#define IFLAG_BUF14M (0x4000) -#define IFLAG_BUF13M (0x2000) -#define IFLAG_BUF12M (0x1000) -#define IFLAG_BUF11M (0x0800) -#define IFLAG_BUF10M (0x0400) -#define IFLAG_BUF9M (0x0200) -#define IFLAG_BUF8M (0x0100) -#define IFLAG_BUF7M (0x0080) -#define IFLAG_BUF6M (0x0040) -#define IFLAG_BUF5M (0x0020) -#define IFLAG_BUF4M (0x0010) -#define IFLAG_BUF3M (0x0008) -#define IFLAG_BUF2M (0x0004) -#define IFLAG_BUF1M (0x0002) -#define IFLAG_BUF0M (0x0001) -#define IFLAG_BUFF_SET_ALL (0xFFFF) -#define IFLAG_BUFF_CLEAR_ALL (0x0000) -#define IFLAG_BUFnM(x) (0x1<<(x)) - -/* - * Message Buffers - */ -#define MB_CNT_CODE(x) (((x)&0x0F)<<24) -#define MB_CNT_SRR (0x00400000) -#define MB_CNT_IDE (0x00200000) -#define MB_CNT_RTR (0x00100000) -#define MB_CNT_LENGTH(x) (((x)&0x0F)<<16) -#define MB_CNT_TIMESTAMP(x) ((x)&0xFFFF) -#define MB_ID_STD(x) (((x)&0x07FF)<<18) -#define MB_ID_EXT(x) ((x)&0x3FFFF) - -/********************************************************************* - * * Edge Port Module (EPORT) - * - *********************************************************************/ - -/* Register read/write macros */ + */ #define MCFEPORT_EPPAR (0xFC094000) #define MCFEPORT_EPDDR (0xFC094002) #define MCFEPORT_EPIER (0xFC094003) @@ -2190,91 +1237,5 @@ #define MCFEPORT_EPPDR (0xFC094005) #define MCFEPORT_EPFR (0xFC094006) -/* Bit definitions and macros for MCF_EPORT_EPPAR */ -#define MCF_EPORT_EPPAR_EPPA1(x) (((x)&0x0003)<<2) -#define MCF_EPORT_EPPAR_EPPA2(x) (((x)&0x0003)<<4) -#define MCF_EPORT_EPPAR_EPPA3(x) (((x)&0x0003)<<6) -#define MCF_EPORT_EPPAR_EPPA4(x) (((x)&0x0003)<<8) -#define MCF_EPORT_EPPAR_EPPA5(x) (((x)&0x0003)<<10) -#define MCF_EPORT_EPPAR_EPPA6(x) (((x)&0x0003)<<12) -#define MCF_EPORT_EPPAR_EPPA7(x) (((x)&0x0003)<<14) -#define MCF_EPORT_EPPAR_LEVEL (0) -#define MCF_EPORT_EPPAR_RISING (1) -#define MCF_EPORT_EPPAR_FALLING (2) -#define MCF_EPORT_EPPAR_BOTH (3) -#define MCF_EPORT_EPPAR_EPPA7_LEVEL (0x0000) -#define MCF_EPORT_EPPAR_EPPA7_RISING (0x4000) -#define MCF_EPORT_EPPAR_EPPA7_FALLING (0x8000) -#define MCF_EPORT_EPPAR_EPPA7_BOTH (0xC000) -#define MCF_EPORT_EPPAR_EPPA6_LEVEL (0x0000) -#define MCF_EPORT_EPPAR_EPPA6_RISING (0x1000) -#define MCF_EPORT_EPPAR_EPPA6_FALLING (0x2000) -#define MCF_EPORT_EPPAR_EPPA6_BOTH (0x3000) -#define MCF_EPORT_EPPAR_EPPA5_LEVEL (0x0000) -#define MCF_EPORT_EPPAR_EPPA5_RISING (0x0400) -#define MCF_EPORT_EPPAR_EPPA5_FALLING (0x0800) -#define MCF_EPORT_EPPAR_EPPA5_BOTH (0x0C00) -#define MCF_EPORT_EPPAR_EPPA4_LEVEL (0x0000) -#define MCF_EPORT_EPPAR_EPPA4_RISING (0x0100) -#define MCF_EPORT_EPPAR_EPPA4_FALLING (0x0200) -#define MCF_EPORT_EPPAR_EPPA4_BOTH (0x0300) -#define MCF_EPORT_EPPAR_EPPA3_LEVEL (0x0000) -#define MCF_EPORT_EPPAR_EPPA3_RISING (0x0040) -#define MCF_EPORT_EPPAR_EPPA3_FALLING (0x0080) -#define MCF_EPORT_EPPAR_EPPA3_BOTH (0x00C0) -#define MCF_EPORT_EPPAR_EPPA2_LEVEL (0x0000) -#define MCF_EPORT_EPPAR_EPPA2_RISING (0x0010) -#define MCF_EPORT_EPPAR_EPPA2_FALLING (0x0020) -#define MCF_EPORT_EPPAR_EPPA2_BOTH (0x0030) -#define MCF_EPORT_EPPAR_EPPA1_LEVEL (0x0000) -#define MCF_EPORT_EPPAR_EPPA1_RISING (0x0004) -#define MCF_EPORT_EPPAR_EPPA1_FALLING (0x0008) -#define MCF_EPORT_EPPAR_EPPA1_BOTH (0x000C) - -/* Bit definitions and macros for MCF_EPORT_EPDDR */ -#define MCF_EPORT_EPDDR_EPDD1 (0x02) -#define MCF_EPORT_EPDDR_EPDD2 (0x04) -#define MCF_EPORT_EPDDR_EPDD3 (0x08) -#define MCF_EPORT_EPDDR_EPDD4 (0x10) -#define MCF_EPORT_EPDDR_EPDD5 (0x20) -#define MCF_EPORT_EPDDR_EPDD6 (0x40) -#define MCF_EPORT_EPDDR_EPDD7 (0x80) - -/* Bit definitions and macros for MCF_EPORT_EPIER */ -#define MCF_EPORT_EPIER_EPIE1 (0x02) -#define MCF_EPORT_EPIER_EPIE2 (0x04) -#define MCF_EPORT_EPIER_EPIE3 (0x08) -#define MCF_EPORT_EPIER_EPIE4 (0x10) -#define MCF_EPORT_EPIER_EPIE5 (0x20) -#define MCF_EPORT_EPIER_EPIE6 (0x40) -#define MCF_EPORT_EPIER_EPIE7 (0x80) - -/* Bit definitions and macros for MCF_EPORT_EPDR */ -#define MCF_EPORT_EPDR_EPD1 (0x02) -#define MCF_EPORT_EPDR_EPD2 (0x04) -#define MCF_EPORT_EPDR_EPD3 (0x08) -#define MCF_EPORT_EPDR_EPD4 (0x10) -#define MCF_EPORT_EPDR_EPD5 (0x20) -#define MCF_EPORT_EPDR_EPD6 (0x40) -#define MCF_EPORT_EPDR_EPD7 (0x80) - -/* Bit definitions and macros for MCF_EPORT_EPPDR */ -#define MCF_EPORT_EPPDR_EPPD1 (0x02) -#define MCF_EPORT_EPPDR_EPPD2 (0x04) -#define MCF_EPORT_EPPDR_EPPD3 (0x08) -#define MCF_EPORT_EPPDR_EPPD4 (0x10) -#define MCF_EPORT_EPPDR_EPPD5 (0x20) -#define MCF_EPORT_EPPDR_EPPD6 (0x40) -#define MCF_EPORT_EPPDR_EPPD7 (0x80) - -/* Bit definitions and macros for MCF_EPORT_EPFR */ -#define MCF_EPORT_EPFR_EPF1 (0x02) -#define MCF_EPORT_EPFR_EPF2 (0x04) -#define MCF_EPORT_EPFR_EPF3 (0x08) -#define MCF_EPORT_EPFR_EPF4 (0x10) -#define MCF_EPORT_EPFR_EPF5 (0x20) -#define MCF_EPORT_EPFR_EPF6 (0x40) -#define MCF_EPORT_EPFR_EPF7 (0x80) - /********************************************************************/ #endif /* m532xsim_h */ diff --git a/arch/m68k/include/asm/m5407sim.h b/arch/m68k/include/asm/m5407sim.h index 79f58dd..a7550bc 100644 --- a/arch/m68k/include/asm/m5407sim.h +++ b/arch/m68k/include/asm/m5407sim.h @@ -23,55 +23,55 @@ /* * Define the 5407 SIM register set addresses. */ -#define MCFSIM_RSR 0x00 /* Reset Status reg (r/w) */ -#define MCFSIM_SYPCR 0x01 /* System Protection reg (r/w)*/ -#define MCFSIM_SWIVR 0x02 /* SW Watchdog intr reg (r/w) */ -#define MCFSIM_SWSR 0x03 /* SW Watchdog service (r/w) */ -#define MCFSIM_PAR 0x04 /* Pin Assignment reg (r/w) */ -#define MCFSIM_IRQPAR 0x06 /* Interrupt Assignment reg (r/w) */ -#define MCFSIM_PLLCR 0x08 /* PLL Control Reg*/ -#define MCFSIM_MPARK 0x0C /* BUS Master Control Reg*/ -#define MCFSIM_IPR 0x40 /* Interrupt Pend reg (r/w) */ -#define MCFSIM_IMR 0x44 /* Interrupt Mask reg (r/w) */ -#define MCFSIM_AVR 0x4b /* Autovector Ctrl reg (r/w) */ -#define MCFSIM_ICR0 0x4c /* Intr Ctrl reg 0 (r/w) */ -#define MCFSIM_ICR1 0x4d /* Intr Ctrl reg 1 (r/w) */ -#define MCFSIM_ICR2 0x4e /* Intr Ctrl reg 2 (r/w) */ -#define MCFSIM_ICR3 0x4f /* Intr Ctrl reg 3 (r/w) */ -#define MCFSIM_ICR4 0x50 /* Intr Ctrl reg 4 (r/w) */ -#define MCFSIM_ICR5 0x51 /* Intr Ctrl reg 5 (r/w) */ -#define MCFSIM_ICR6 0x52 /* Intr Ctrl reg 6 (r/w) */ -#define MCFSIM_ICR7 0x53 /* Intr Ctrl reg 7 (r/w) */ -#define MCFSIM_ICR8 0x54 /* Intr Ctrl reg 8 (r/w) */ -#define MCFSIM_ICR9 0x55 /* Intr Ctrl reg 9 (r/w) */ -#define MCFSIM_ICR10 0x56 /* Intr Ctrl reg 10 (r/w) */ -#define MCFSIM_ICR11 0x57 /* Intr Ctrl reg 11 (r/w) */ - -#define MCFSIM_CSAR0 0x80 /* CS 0 Address 0 reg (r/w) */ -#define MCFSIM_CSMR0 0x84 /* CS 0 Mask 0 reg (r/w) */ -#define MCFSIM_CSCR0 0x8a /* CS 0 Control reg (r/w) */ -#define MCFSIM_CSAR1 0x8c /* CS 1 Address reg (r/w) */ -#define MCFSIM_CSMR1 0x90 /* CS 1 Mask reg (r/w) */ -#define MCFSIM_CSCR1 0x96 /* CS 1 Control reg (r/w) */ - -#define MCFSIM_CSAR2 0x98 /* CS 2 Address reg (r/w) */ -#define MCFSIM_CSMR2 0x9c /* CS 2 Mask reg (r/w) */ -#define MCFSIM_CSCR2 0xa2 /* CS 2 Control reg (r/w) */ -#define MCFSIM_CSAR3 0xa4 /* CS 3 Address reg (r/w) */ -#define MCFSIM_CSMR3 0xa8 /* CS 3 Mask reg (r/w) */ -#define MCFSIM_CSCR3 0xae /* CS 3 Control reg (r/w) */ -#define MCFSIM_CSAR4 0xb0 /* CS 4 Address reg (r/w) */ -#define MCFSIM_CSMR4 0xb4 /* CS 4 Mask reg (r/w) */ -#define MCFSIM_CSCR4 0xba /* CS 4 Control reg (r/w) */ -#define MCFSIM_CSAR5 0xbc /* CS 5 Address reg (r/w) */ -#define MCFSIM_CSMR5 0xc0 /* CS 5 Mask reg (r/w) */ -#define MCFSIM_CSCR5 0xc6 /* CS 5 Control reg (r/w) */ -#define MCFSIM_CSAR6 0xc8 /* CS 6 Address reg (r/w) */ -#define MCFSIM_CSMR6 0xcc /* CS 6 Mask reg (r/w) */ -#define MCFSIM_CSCR6 0xd2 /* CS 6 Control reg (r/w) */ -#define MCFSIM_CSAR7 0xd4 /* CS 7 Address reg (r/w) */ -#define MCFSIM_CSMR7 0xd8 /* CS 7 Mask reg (r/w) */ -#define MCFSIM_CSCR7 0xde /* CS 7 Control reg (r/w) */ +#define MCFSIM_RSR (MCF_MBAR + 0x00) /* Reset Status */ +#define MCFSIM_SYPCR (MCF_MBAR + 0x01) /* System Protection */ +#define MCFSIM_SWIVR (MCF_MBAR + 0x02) /* SW Watchdog intr */ +#define MCFSIM_SWSR (MCF_MBAR + 0x03) /* SW Watchdog service*/ +#define MCFSIM_PAR (MCF_MBAR + 0x04) /* Pin Assignment */ +#define MCFSIM_IRQPAR (MCF_MBAR + 0x06) /* Intr Assignment */ +#define MCFSIM_PLLCR (MCF_MBAR + 0x08) /* PLL Ctrl */ +#define MCFSIM_MPARK (MCF_MBAR + 0x0C) /* BUS Master Ctrl */ +#define MCFSIM_IPR (MCF_MBAR + 0x40) /* Interrupt Pending */ +#define MCFSIM_IMR (MCF_MBAR + 0x44) /* Interrupt Mask */ +#define MCFSIM_AVR (MCF_MBAR + 0x4b) /* Autovector Ctrl */ +#define MCFSIM_ICR0 (MCF_MBAR + 0x4c) /* Intr Ctrl reg 0 */ +#define MCFSIM_ICR1 (MCF_MBAR + 0x4d) /* Intr Ctrl reg 1 */ +#define MCFSIM_ICR2 (MCF_MBAR + 0x4e) /* Intr Ctrl reg 2 */ +#define MCFSIM_ICR3 (MCF_MBAR + 0x4f) /* Intr Ctrl reg 3 */ +#define MCFSIM_ICR4 (MCF_MBAR + 0x50) /* Intr Ctrl reg 4 */ +#define MCFSIM_ICR5 (MCF_MBAR + 0x51) /* Intr Ctrl reg 5 */ +#define MCFSIM_ICR6 (MCF_MBAR + 0x52) /* Intr Ctrl reg 6 */ +#define MCFSIM_ICR7 (MCF_MBAR + 0x53) /* Intr Ctrl reg 7 */ +#define MCFSIM_ICR8 (MCF_MBAR + 0x54) /* Intr Ctrl reg 8 */ +#define MCFSIM_ICR9 (MCF_MBAR + 0x55) /* Intr Ctrl reg 9 */ +#define MCFSIM_ICR10 (MCF_MBAR + 0x56) /* Intr Ctrl reg 10 */ +#define MCFSIM_ICR11 (MCF_MBAR + 0x57) /* Intr Ctrl reg 11 */ + +#define MCFSIM_CSAR0 (MCF_MBAR + 0x80) /* CS 0 Address reg */ +#define MCFSIM_CSMR0 (MCF_MBAR + 0x84) /* CS 0 Mask reg */ +#define MCFSIM_CSCR0 (MCF_MBAR + 0x8a) /* CS 0 Control reg */ +#define MCFSIM_CSAR1 (MCF_MBAR + 0x8c) /* CS 1 Address reg */ +#define MCFSIM_CSMR1 (MCF_MBAR + 0x90) /* CS 1 Mask reg */ +#define MCFSIM_CSCR1 (MCF_MBAR + 0x96) /* CS 1 Control reg */ + +#define MCFSIM_CSAR2 (MCF_MBAR + 0x98) /* CS 2 Address reg */ +#define MCFSIM_CSMR2 (MCF_MBAR + 0x9c) /* CS 2 Mask reg */ +#define MCFSIM_CSCR2 (MCF_MBAR + 0xa2) /* CS 2 Control reg */ +#define MCFSIM_CSAR3 (MCF_MBAR + 0xa4) /* CS 3 Address reg */ +#define MCFSIM_CSMR3 (MCF_MBAR + 0xa8) /* CS 3 Mask reg */ +#define MCFSIM_CSCR3 (MCF_MBAR + 0xae) /* CS 3 Control reg */ +#define MCFSIM_CSAR4 (MCF_MBAR + 0xb0) /* CS 4 Address reg */ +#define MCFSIM_CSMR4 (MCF_MBAR + 0xb4) /* CS 4 Mask reg */ +#define MCFSIM_CSCR4 (MCF_MBAR + 0xba) /* CS 4 Control reg */ +#define MCFSIM_CSAR5 (MCF_MBAR + 0xbc) /* CS 5 Address reg */ +#define MCFSIM_CSMR5 (MCF_MBAR + 0xc0) /* CS 5 Mask reg */ +#define MCFSIM_CSCR5 (MCF_MBAR + 0xc6) /* CS 5 Control reg */ +#define MCFSIM_CSAR6 (MCF_MBAR + 0xc8) /* CS 6 Address reg */ +#define MCFSIM_CSMR6 (MCF_MBAR + 0xcc) /* CS 6 Mask reg */ +#define MCFSIM_CSCR6 (MCF_MBAR + 0xd2) /* CS 6 Control reg */ +#define MCFSIM_CSAR7 (MCF_MBAR + 0xd4) /* CS 7 Address reg */ +#define MCFSIM_CSMR7 (MCF_MBAR + 0xd8) /* CS 7 Mask reg */ +#define MCFSIM_CSCR7 (MCF_MBAR + 0xde) /* CS 7 Control reg */ #define MCFSIM_DCR (MCF_MBAR + 0x100) /* DRAM Control */ #define MCFSIM_DACR0 (MCF_MBAR + 0x108) /* DRAM 0 Addr/Ctrl */ @@ -102,9 +102,9 @@ /* * Generic GPIO support */ -#define MCFGPIO_PIN_MAX 16 -#define MCFGPIO_IRQ_MAX -1 -#define MCFGPIO_IRQ_VECBASE -1 +#define MCFGPIO_PIN_MAX 16 +#define MCFGPIO_IRQ_MAX -1 +#define MCFGPIO_IRQ_VECBASE -1 /* * Some symbol defines for the above... @@ -130,9 +130,9 @@ /* * Defines for the IRQPAR Register */ -#define IRQ5_LEVEL4 0x80 -#define IRQ3_LEVEL6 0x40 -#define IRQ1_LEVEL2 0x20 +#define IRQ5_LEVEL4 0x80 +#define IRQ3_LEVEL6 0x40 +#define IRQ1_LEVEL2 0x20 /* * Define system peripheral IRQ usage. diff --git a/arch/m68k/include/asm/m54xxgpt.h b/arch/m68k/include/asm/m54xxgpt.h index df75dd8..0b69cd1 100644 --- a/arch/m68k/include/asm/m54xxgpt.h +++ b/arch/m68k/include/asm/m54xxgpt.h @@ -16,26 +16,26 @@ *********************************************************************/ /* Register read/write macros */ -#define MCF_GPT_GMS0 0x000800 -#define MCF_GPT_GCIR0 0x000804 -#define MCF_GPT_GPWM0 0x000808 -#define MCF_GPT_GSR0 0x00080C -#define MCF_GPT_GMS1 0x000810 -#define MCF_GPT_GCIR1 0x000814 -#define MCF_GPT_GPWM1 0x000818 -#define MCF_GPT_GSR1 0x00081C -#define MCF_GPT_GMS2 0x000820 -#define MCF_GPT_GCIR2 0x000824 -#define MCF_GPT_GPWM2 0x000828 -#define MCF_GPT_GSR2 0x00082C -#define MCF_GPT_GMS3 0x000830 -#define MCF_GPT_GCIR3 0x000834 -#define MCF_GPT_GPWM3 0x000838 -#define MCF_GPT_GSR3 0x00083C -#define MCF_GPT_GMS(x) (0x000800+((x)*0x010)) -#define MCF_GPT_GCIR(x) (0x000804+((x)*0x010)) -#define MCF_GPT_GPWM(x) (0x000808+((x)*0x010)) -#define MCF_GPT_GSR(x) (0x00080C+((x)*0x010)) +#define MCF_GPT_GMS0 (MCF_MBAR + 0x000800) +#define MCF_GPT_GCIR0 (MCF_MBAR + 0x000804) +#define MCF_GPT_GPWM0 (MCF_MBAR + 0x000808) +#define MCF_GPT_GSR0 (MCF_MBAR + 0x00080C) +#define MCF_GPT_GMS1 (MCF_MBAR + 0x000810) +#define MCF_GPT_GCIR1 (MCF_MBAR + 0x000814) +#define MCF_GPT_GPWM1 (MCF_MBAR + 0x000818) +#define MCF_GPT_GSR1 (MCF_MBAR + 0x00081C) +#define MCF_GPT_GMS2 (MCF_MBAR + 0x000820) +#define MCF_GPT_GCIR2 (MCF_MBAR + 0x000824) +#define MCF_GPT_GPWM2 (MCF_MBAR + 0x000828) +#define MCF_GPT_GSR2 (MCF_MBAR + 0x00082C) +#define MCF_GPT_GMS3 (MCF_MBAR + 0x000830) +#define MCF_GPT_GCIR3 (MCF_MBAR + 0x000834) +#define MCF_GPT_GPWM3 (MCF_MBAR + 0x000838) +#define MCF_GPT_GSR3 (MCF_MBAR + 0x00083C) +#define MCF_GPT_GMS(x) (MCF_MBAR + 0x000800 + ((x) * 0x010)) +#define MCF_GPT_GCIR(x) (MCF_MBAR + 0x000804 + ((x) * 0x010)) +#define MCF_GPT_GPWM(x) (MCF_MBAR + 0x000808 + ((x) * 0x010)) +#define MCF_GPT_GSR(x) (MCF_MBAR + 0x00080C + ((x) * 0x010)) /* Bit definitions and macros for MCF_GPT_GMS */ #define MCF_GPT_GMS_TMS(x) (((x)&0x00000007)<<0) diff --git a/arch/m68k/include/asm/m54xxsim.h b/arch/m68k/include/asm/m54xxsim.h index d3c5e0d..d3bd838 100644 --- a/arch/m68k/include/asm/m54xxsim.h +++ b/arch/m68k/include/asm/m54xxsim.h @@ -47,6 +47,12 @@ #define MCF_IRQ_UART3 (MCFINT_VECBASE + 32) /* + * Slice Timer support. + */ +#define MCFSLT_TIMER0 (MCF_MBAR + 0x900) /* Base addr TIMER0 */ +#define MCFSLT_TIMER1 (MCF_MBAR + 0x910) /* Base addr TIMER1 */ + +/* * Generic GPIO support */ #define MCFGPIO_PIN_MAX 0 /* I am too lazy to count */ @@ -64,15 +70,25 @@ #define MCFEPORT_EPFR (MCF_MBAR + 0xf0c) /* Flags */ /* - * Some PSC related definitions + * Pin Assignment register definitions */ -#define MCF_PAR_PSC(x) (0x000A4F-((x)&0x3)) +#define MCFGPIO_PAR_FBCTL (MCF_MBAR + 0xA40) +#define MCFGPIO_PAR_FBCS (MCF_MBAR + 0xA42) +#define MCFGPIO_PAR_DMA (MCF_MBAR + 0xA43) +#define MCFGPIO_PAR_FECI2CIRQ (MCF_MBAR + 0xA44) +#define MCFGPIO_PAR_PCIBG (MCF_MBAR + 0xA48) /* PCI bus grant */ +#define MCFGPIO_PAR_PCIBR (MCF_MBAR + 0xA4A) /* PCI */ +#define MCFGPIO_PAR_PSC0 (MCF_MBAR + 0xA4F) +#define MCFGPIO_PAR_PSC1 (MCF_MBAR + 0xA4E) +#define MCFGPIO_PAR_PSC2 (MCF_MBAR + 0xA4D) +#define MCFGPIO_PAR_PSC3 (MCF_MBAR + 0xA4C) +#define MCFGPIO_PAR_DSPI (MCF_MBAR + 0xA50) +#define MCFGPIO_PAR_TIMER (MCF_MBAR + 0xA52) + #define MCF_PAR_SDA (0x0008) #define MCF_PAR_SCL (0x0004) #define MCF_PAR_PSC_TXD (0x04) #define MCF_PAR_PSC_RXD (0x08) -#define MCF_PAR_PSC_RTS(x) (((x)&0x03)<<4) -#define MCF_PAR_PSC_CTS(x) (((x)&0x03)<<6) #define MCF_PAR_PSC_CTS_GPIO (0x00) #define MCF_PAR_PSC_CTS_BCLK (0x80) #define MCF_PAR_PSC_CTS_CTS (0xC0) @@ -81,7 +97,4 @@ #define MCF_PAR_PSC_RTS_RTS (0x30) #define MCF_PAR_PSC_CANRX (0x40) -#define MCF_PAR_PCIBG (CONFIG_MBAR + 0xa48) /* PCI bus grant */ -#define MCF_PAR_PCIBR (CONFIG_MBAR + 0xa4a) /* PCI */ - #endif /* m54xxsim_h */ diff --git a/arch/m68k/include/asm/mcfslt.h b/arch/m68k/include/asm/mcfslt.h index d0d0ecb..c2314b6 100644 --- a/arch/m68k/include/asm/mcfslt.h +++ b/arch/m68k/include/asm/mcfslt.h @@ -13,13 +13,6 @@ /****************************************************************************/ /* - * Get address specific defines for the 547x. - */ -#define MCFSLT_TIMER0 0x900 /* Base address of TIMER0 */ -#define MCFSLT_TIMER1 0x910 /* Base address of TIMER1 */ - - -/* * Define the SLT timer register set addresses. */ #define MCFSLT_STCNT 0x00 /* Terminal count */ diff --git a/arch/m68k/include/asm/nettel.h b/arch/m68k/include/asm/nettel.h index 4dec2d9..2a7a766 100644 --- a/arch/m68k/include/asm/nettel.h +++ b/arch/m68k/include/asm/nettel.h @@ -21,6 +21,7 @@ #ifdef CONFIG_COLDFIRE #include <asm/coldfire.h> #include <asm/mcfsim.h> +#include <asm/io.h> #endif /*---------------------------------------------------------------------------*/ @@ -86,16 +87,12 @@ static __inline__ void mcf_setppdata(unsigned int mask, unsigned int bits) */ static __inline__ unsigned int mcf_getppdata(void) { - volatile unsigned short *pp; - pp = (volatile unsigned short *) (MCF_MBAR + MCFSIM_PBDAT); - return((unsigned int) *pp); + return readw(MCFSIM_PBDAT); } static __inline__ void mcf_setppdata(unsigned int mask, unsigned int bits) { - volatile unsigned short *pp; - pp = (volatile unsigned short *) (MCF_MBAR + MCFSIM_PBDAT); - *pp = (*pp & ~mask) | bits; + write((readw(MCFSIM_PBDAT) & ~mask) | bits, MCFSIM_PBDAT); } #endif diff --git a/arch/m68k/platform/68VZ328/Makefile b/arch/m68k/platform/68VZ328/Makefile index a49d75e..8166741 100644 --- a/arch/m68k/platform/68VZ328/Makefile +++ b/arch/m68k/platform/68VZ328/Makefile @@ -1,11 +1,5 @@ # -# Makefile for arch/m68knommu/platform/68VZ328. +# Makefile for arch/m68k/platform/68VZ328. # obj-y := config.o -extra-$(DRAGEN2):= screen.h - -$(obj)/screen.h: $(src)/screen.xbm $(src)/xbm2lcd.pl - perl $(src)/xbm2lcd.pl < $(src)/screen.xbm > $(obj)/screen.h - -clean-files := $(obj)/screen.h diff --git a/arch/m68k/platform/coldfire/device.c b/arch/m68k/platform/coldfire/device.c index 81f0fb5..71ea4c0 100644 --- a/arch/m68k/platform/coldfire/device.c +++ b/arch/m68k/platform/coldfire/device.c @@ -347,12 +347,12 @@ static void __init mcf_uart_set_irq(void) { #ifdef MCFUART_UIVR /* UART0 interrupt setup */ - writeb(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI1, MCF_MBAR + MCFSIM_UART1ICR); + writeb(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI1, MCFSIM_UART1ICR); writeb(MCF_IRQ_UART0, MCFUART_BASE0 + MCFUART_UIVR); mcf_mapirq2imr(MCF_IRQ_UART0, MCFINTC_UART0); /* UART1 interrupt setup */ - writeb(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI2, MCF_MBAR + MCFSIM_UART2ICR); + writeb(MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI2, MCFSIM_UART2ICR); writeb(MCF_IRQ_UART1, MCFUART_BASE1 + MCFUART_UIVR); mcf_mapirq2imr(MCF_IRQ_UART1, MCFINTC_UART1); #endif diff --git a/arch/m68k/platform/coldfire/head.S b/arch/m68k/platform/coldfire/head.S index b88f571..fa31be2 100644 --- a/arch/m68k/platform/coldfire/head.S +++ b/arch/m68k/platform/coldfire/head.S @@ -60,7 +60,7 @@ #elif defined(CONFIG_M5272) .macro GET_MEM_SIZE - movel MCF_MBAR+MCFSIM_CSOR7,%d0 /* get SDRAM address mask */ + movel MCFSIM_CSOR7,%d0 /* get SDRAM address mask */ andil #0xfffff000,%d0 /* mask out chip select options */ negl %d0 /* negate bits */ .endm diff --git a/arch/m68k/platform/coldfire/intc-5249.c b/arch/m68k/platform/coldfire/intc-5249.c index f343bf7..0864b83 100644 --- a/arch/m68k/platform/coldfire/intc-5249.c +++ b/arch/m68k/platform/coldfire/intc-5249.c @@ -20,22 +20,22 @@ static void intc2_irq_gpio_mask(struct irq_data *d) { u32 imr; - imr = readl(MCF_MBAR2 + MCFSIM2_GPIOINTENABLE); + imr = readl(MCFSIM2_GPIOINTENABLE); imr &= ~(0x1 << (d->irq - MCFINTC2_GPIOIRQ0)); - writel(imr, MCF_MBAR2 + MCFSIM2_GPIOINTENABLE); + writel(imr, MCFSIM2_GPIOINTENABLE); } static void intc2_irq_gpio_unmask(struct irq_data *d) { u32 imr; - imr = readl(MCF_MBAR2 + MCFSIM2_GPIOINTENABLE); + imr = readl(MCFSIM2_GPIOINTENABLE); imr |= (0x1 << (d->irq - MCFINTC2_GPIOIRQ0)); - writel(imr, MCF_MBAR2 + MCFSIM2_GPIOINTENABLE); + writel(imr, MCFSIM2_GPIOINTENABLE); } static void intc2_irq_gpio_ack(struct irq_data *d) { - writel(0x1 << (d->irq - MCFINTC2_GPIOIRQ0), MCF_MBAR2 + MCFSIM2_GPIOINTCLEAR); + writel(0x1 << (d->irq - MCFINTC2_GPIOIRQ0), MCFSIM2_GPIOINTCLEAR); } static struct irq_chip intc2_irq_gpio_chip = { diff --git a/arch/m68k/platform/coldfire/intc-5272.c b/arch/m68k/platform/coldfire/intc-5272.c index 7160e61..d7b6956 100644 --- a/arch/m68k/platform/coldfire/intc-5272.c +++ b/arch/m68k/platform/coldfire/intc-5272.c @@ -86,7 +86,7 @@ static void intc_irq_mask(struct irq_data *d) u32 v; irq -= MCFINT_VECBASE; v = 0x8 << intc_irqmap[irq].index; - writel(v, MCF_MBAR + intc_irqmap[irq].icr); + writel(v, intc_irqmap[irq].icr); } } @@ -98,7 +98,7 @@ static void intc_irq_unmask(struct irq_data *d) u32 v; irq -= MCFINT_VECBASE; v = 0xd << intc_irqmap[irq].index; - writel(v, MCF_MBAR + intc_irqmap[irq].icr); + writel(v, intc_irqmap[irq].icr); } } @@ -111,10 +111,10 @@ static void intc_irq_ack(struct irq_data *d) irq -= MCFINT_VECBASE; if (intc_irqmap[irq].ack) { u32 v; - v = readl(MCF_MBAR + intc_irqmap[irq].icr); + v = readl(intc_irqmap[irq].icr); v &= (0x7 << intc_irqmap[irq].index); v |= (0x8 << intc_irqmap[irq].index); - writel(v, MCF_MBAR + intc_irqmap[irq].icr); + writel(v, intc_irqmap[irq].icr); } } } @@ -127,12 +127,12 @@ static int intc_irq_set_type(struct irq_data *d, unsigned int type) irq -= MCFINT_VECBASE; if (intc_irqmap[irq].ack) { u32 v; - v = readl(MCF_MBAR + MCFSIM_PITR); + v = readl(MCFSIM_PITR); if (type == IRQ_TYPE_EDGE_FALLING) v &= ~(0x1 << (32 - irq)); else v |= (0x1 << (32 - irq)); - writel(v, MCF_MBAR + MCFSIM_PITR); + writel(v, MCFSIM_PITR); } } return 0; @@ -163,10 +163,10 @@ void __init init_IRQ(void) int irq, edge; /* Mask all interrupt sources */ - writel(0x88888888, MCF_MBAR + MCFSIM_ICR1); - writel(0x88888888, MCF_MBAR + MCFSIM_ICR2); - writel(0x88888888, MCF_MBAR + MCFSIM_ICR3); - writel(0x88888888, MCF_MBAR + MCFSIM_ICR4); + writel(0x88888888, MCFSIM_ICR1); + writel(0x88888888, MCFSIM_ICR2); + writel(0x88888888, MCFSIM_ICR3); + writel(0x88888888, MCFSIM_ICR4); for (irq = 0; (irq < NR_IRQS); irq++) { irq_set_chip(irq, &intc_irq_chip); diff --git a/arch/m68k/platform/coldfire/intc.c b/arch/m68k/platform/coldfire/intc.c index 5c0c150..cce2574 100644 --- a/arch/m68k/platform/coldfire/intc.c +++ b/arch/m68k/platform/coldfire/intc.c @@ -45,23 +45,23 @@ unsigned char mcf_irq2imr[NR_IRQS]; void mcf_setimr(int index) { u16 imr; - imr = __raw_readw(MCF_MBAR + MCFSIM_IMR); - __raw_writew(imr | (0x1 << index), MCF_MBAR + MCFSIM_IMR); + imr = __raw_readw(MCFSIM_IMR); + __raw_writew(imr | (0x1 << index), MCFSIM_IMR); } void mcf_clrimr(int index) { u16 imr; - imr = __raw_readw(MCF_MBAR + MCFSIM_IMR); - __raw_writew(imr & ~(0x1 << index), MCF_MBAR + MCFSIM_IMR); + imr = __raw_readw(MCFSIM_IMR); + __raw_writew(imr & ~(0x1 << index), MCFSIM_IMR); } void mcf_maskimr(unsigned int mask) { u16 imr; - imr = __raw_readw(MCF_MBAR + MCFSIM_IMR); + imr = __raw_readw(MCFSIM_IMR); imr |= mask; - __raw_writew(imr, MCF_MBAR + MCFSIM_IMR); + __raw_writew(imr, MCFSIM_IMR); } #else @@ -69,23 +69,23 @@ void mcf_maskimr(unsigned int mask) void mcf_setimr(int index) { u32 imr; - imr = __raw_readl(MCF_MBAR + MCFSIM_IMR); - __raw_writel(imr | (0x1 << index), MCF_MBAR + MCFSIM_IMR); + imr = __raw_readl(MCFSIM_IMR); + __raw_writel(imr | (0x1 << index), MCFSIM_IMR); } void mcf_clrimr(int index) { u32 imr; - imr = __raw_readl(MCF_MBAR + MCFSIM_IMR); - __raw_writel(imr & ~(0x1 << index), MCF_MBAR + MCFSIM_IMR); + imr = __raw_readl(MCFSIM_IMR); + __raw_writel(imr & ~(0x1 << index), MCFSIM_IMR); } void mcf_maskimr(unsigned int mask) { u32 imr; - imr = __raw_readl(MCF_MBAR + MCFSIM_IMR); + imr = __raw_readl(MCFSIM_IMR); imr |= mask; - __raw_writel(imr, MCF_MBAR + MCFSIM_IMR); + __raw_writel(imr, MCFSIM_IMR); } #endif @@ -104,9 +104,9 @@ void mcf_autovector(int irq) #ifdef MCFSIM_AVR if ((irq >= EIRQ1) && (irq <= EIRQ7)) { u8 avec; - avec = __raw_readb(MCF_MBAR + MCFSIM_AVR); + avec = __raw_readb(MCFSIM_AVR); avec |= (0x1 << (irq - EIRQ1 + 1)); - __raw_writeb(avec, MCF_MBAR + MCFSIM_AVR); + __raw_writeb(avec, MCFSIM_AVR); } #endif } diff --git a/arch/m68k/platform/coldfire/m523x.c b/arch/m68k/platform/coldfire/m523x.c index d47dfd8..ff37fe9 100644 --- a/arch/m68k/platform/coldfire/m523x.c +++ b/arch/m68k/platform/coldfire/m523x.c @@ -42,14 +42,8 @@ static void __init m523x_qspi_init(void) static void __init m523x_fec_init(void) { - u16 par; - u8 v; - /* Set multi-function pins to ethernet use */ - par = readw(MCF_IPSBAR + 0x100082); - writew(par | 0xf00, MCF_IPSBAR + 0x100082); - v = readb(MCF_IPSBAR + 0x100078); - writeb(v | 0xc0, MCF_IPSBAR + 0x100078); + writeb(readb(MCFGPIO_PAR_FECI2C) | 0xf0, MCFGPIO_PAR_FECI2C); } /***************************************************************************/ diff --git a/arch/m68k/platform/coldfire/m5249.c b/arch/m68k/platform/coldfire/m5249.c index 300e729..23b19cb 100644 --- a/arch/m68k/platform/coldfire/m5249.c +++ b/arch/m68k/platform/coldfire/m5249.c @@ -57,7 +57,7 @@ static void __init m5249_qspi_init(void) { /* QSPI irq setup */ writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL4 | MCFSIM_ICR_PRI0, - MCF_MBAR + MCFSIM_QSPIICR); + MCFSIM_QSPIICR); mcf_mapirq2imr(MCF_IRQ_QSPI, MCFINTC_QSPI); } @@ -72,11 +72,11 @@ static void __init m5249_smc91x_init(void) u32 gpio; /* Set the GPIO line as interrupt source for smc91x device */ - gpio = readl(MCF_MBAR2 + MCFSIM2_GPIOINTENABLE); - writel(gpio | 0x40, MCF_MBAR2 + MCFSIM2_GPIOINTENABLE); + gpio = readl(MCFSIM2_GPIOINTENABLE); + writel(gpio | 0x40, MCFSIM2_GPIOINTENABLE); - gpio = readl(MCF_MBAR2 + MCFSIM2_INTLEVEL5); - writel(gpio | 0x04000000, MCF_MBAR2 + MCFSIM2_INTLEVEL5); + gpio = readl(MCFSIM2_INTLEVEL5); + writel(gpio | 0x04000000, MCFSIM2_INTLEVEL5); } #endif /* CONFIG_M5249C3 */ diff --git a/arch/m68k/platform/coldfire/m525x.c b/arch/m68k/platform/coldfire/m525x.c index 8ce905f..fce8f8a 100644 --- a/arch/m68k/platform/coldfire/m525x.c +++ b/arch/m68k/platform/coldfire/m525x.c @@ -30,7 +30,7 @@ static void __init m525x_qspi_init(void) /* QSPI irq setup */ writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL4 | MCFSIM_ICR_PRI0, - MCF_MBAR + MCFSIM_QSPIICR); + MCFSIM_QSPIICR); mcf_mapirq2imr(MCF_IRQ_QSPI, MCFINTC_QSPI); #endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */ } @@ -42,7 +42,7 @@ static void __init m525x_i2c_init(void) /* first I2C controller uses regular irq setup */ writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL5 | MCFSIM_ICR_PRI0, - MCF_MBAR + MCFSIM_I2CICR); + MCFSIM_I2CICR); mcf_mapirq2imr(MCF_IRQ_I2C0, MCFINTC_I2C); /* second I2C controller is completely different */ diff --git a/arch/m68k/platform/coldfire/m5272.c b/arch/m68k/platform/coldfire/m5272.c index e68bc7a..45b246d 100644 --- a/arch/m68k/platform/coldfire/m5272.c +++ b/arch/m68k/platform/coldfire/m5272.c @@ -35,13 +35,13 @@ static void __init m5272_uarts_init(void) u32 v; /* Enable the output lines for the serial ports */ - v = readl(MCF_MBAR + MCFSIM_PBCNT); + v = readl(MCFSIM_PBCNT); v = (v & ~0x000000ff) | 0x00000055; - writel(v, MCF_MBAR + MCFSIM_PBCNT); + writel(v, MCFSIM_PBCNT); - v = readl(MCF_MBAR + MCFSIM_PDCNT); + v = readl(MCFSIM_PDCNT); v = (v & ~0x000003fc) | 0x000002a8; - writel(v, MCF_MBAR + MCFSIM_PDCNT); + writel(v, MCFSIM_PDCNT); } /***************************************************************************/ @@ -50,9 +50,9 @@ static void m5272_cpu_reset(void) { local_irq_disable(); /* Set watchdog to reset, and enabled */ - __raw_writew(0, MCF_MBAR + MCFSIM_WIRR); - __raw_writew(1, MCF_MBAR + MCFSIM_WRRR); - __raw_writew(0, MCF_MBAR + MCFSIM_WCR); + __raw_writew(0, MCFSIM_WIRR); + __raw_writew(1, MCFSIM_WRRR); + __raw_writew(0, MCFSIM_WCR); for (;;) /* wait for watchdog to timeout */; } @@ -62,11 +62,8 @@ static void m5272_cpu_reset(void) void __init config_BSP(char *commandp, int size) { #if defined (CONFIG_MOD5272) - volatile unsigned char *pivrp; - /* Set base of device vectors to be 64 */ - pivrp = (volatile unsigned char *) (MCF_MBAR + MCFSIM_PIVR); - *pivrp = 0x40; + writeb(0x40, MCFSIM_PIVR); #endif #if defined(CONFIG_NETtel) || defined(CONFIG_SCALES) diff --git a/arch/m68k/platform/coldfire/m527x.c b/arch/m68k/platform/coldfire/m527x.c index b3cb378..1431ba0 100644 --- a/arch/m68k/platform/coldfire/m527x.c +++ b/arch/m68k/platform/coldfire/m527x.c @@ -53,9 +53,9 @@ static void __init m527x_uarts_init(void) /* * External Pin Mask Setting & Enable External Pin for Interface */ - sepmask = readw(MCF_IPSBAR + MCF_GPIO_PAR_UART); + sepmask = readw(MCFGPIO_PAR_UART); sepmask |= UART0_ENABLE_MASK | UART1_ENABLE_MASK | UART2_ENABLE_MASK; - writew(sepmask, MCF_IPSBAR + MCF_GPIO_PAR_UART); + writew(sepmask, MCFGPIO_PAR_UART); } /***************************************************************************/ @@ -67,19 +67,19 @@ static void __init m527x_fec_init(void) /* Set multi-function pins to ethernet mode for fec0 */ #if defined(CONFIG_M5271) - v = readb(MCF_IPSBAR + 0x100047); - writeb(v | 0xf0, MCF_IPSBAR + 0x100047); + v = readb(MCFGPIO_PAR_FECI2C); + writeb(v | 0xf0, MCFGPIO_PAR_FECI2C); #else - par = readw(MCF_IPSBAR + 0x100082); - writew(par | 0xf00, MCF_IPSBAR + 0x100082); - v = readb(MCF_IPSBAR + 0x100078); - writeb(v | 0xc0, MCF_IPSBAR + 0x100078); + par = readw(MCFGPIO_PAR_FECI2C); + writew(par | 0xf00, MCFGPIO_PAR_FECI2C); + v = readb(MCFGPIO_PAR_FEC0HL); + writeb(v | 0xc0, MCFGPIO_PAR_FEC0HL); /* Set multi-function pins to ethernet mode for fec1 */ - par = readw(MCF_IPSBAR + 0x100082); - writew(par | 0xa0, MCF_IPSBAR + 0x100082); - v = readb(MCF_IPSBAR + 0x100079); - writeb(v | 0xc0, MCF_IPSBAR + 0x100079); + par = readw(MCFGPIO_PAR_FECI2C); + writew(par | 0xa0, MCFGPIO_PAR_FECI2C); + v = readb(MCFGPIO_PAR_FEC1HL); + writeb(v | 0xc0, MCFGPIO_PAR_FEC1HL); #endif } diff --git a/arch/m68k/platform/coldfire/m528x.c b/arch/m68k/platform/coldfire/m528x.c index f1319e5..f9f7e6a 100644 --- a/arch/m68k/platform/coldfire/m528x.c +++ b/arch/m68k/platform/coldfire/m528x.c @@ -53,9 +53,9 @@ static void __init m528x_fec_init(void) u16 v16; /* Set multi-function pins to ethernet mode for fec0 */ - v16 = readw(MCF_IPSBAR + 0x100056); - writew(v16 | 0xf00, MCF_IPSBAR + 0x100056); - writeb(0xc0, MCF_IPSBAR + 0x100058); + v16 = readw(MCFGPIO_PASPAR); + writew(v16 | 0xf00, MCFGPIO_PASPAR); + writeb(0xc0, MCFGPIO_PEHLPAR); } /***************************************************************************/ diff --git a/arch/m68k/platform/coldfire/m532x.c b/arch/m68k/platform/coldfire/m532x.c index 4819a44..7951d1d 100644 --- a/arch/m68k/platform/coldfire/m532x.c +++ b/arch/m68k/platform/coldfire/m532x.c @@ -172,7 +172,7 @@ static void __init m532x_clk_init(void) static void __init m532x_qspi_init(void) { /* setup QSPS pins for QSPI with gpio CS control */ - writew(0x01f0, MCF_GPIO_PAR_QSPI); + writew(0x01f0, MCFGPIO_PAR_QSPI); } #endif /* IS_ENABLED(CONFIG_SPI_COLDFIRE_QSPI) */ @@ -182,18 +182,24 @@ static void __init m532x_qspi_init(void) static void __init m532x_uarts_init(void) { /* UART GPIO initialization */ - MCF_GPIO_PAR_UART |= 0x0FFF; + writew(readw(MCFGPIO_PAR_UART) | 0x0FFF, MCFGPIO_PAR_UART); } /***************************************************************************/ static void __init m532x_fec_init(void) { + u8 v; + /* Set multi-function pins to ethernet mode for fec0 */ - MCF_GPIO_PAR_FECI2C |= (MCF_GPIO_PAR_FECI2C_PAR_MDC_EMDC | - MCF_GPIO_PAR_FECI2C_PAR_MDIO_EMDIO); - MCF_GPIO_PAR_FEC = (MCF_GPIO_PAR_FEC_PAR_FEC_7W_FEC | - MCF_GPIO_PAR_FEC_PAR_FEC_MII_FEC); + v = readb(MCFGPIO_PAR_FECI2C); + v |= MCF_GPIO_PAR_FECI2C_PAR_MDC_EMDC | + MCF_GPIO_PAR_FECI2C_PAR_MDIO_EMDIO; + writeb(v, MCFGPIO_PAR_FECI2C); + + v = readb(MCFGPIO_PAR_FEC); + v = MCF_GPIO_PAR_FEC_PAR_FEC_7W_FEC | MCF_GPIO_PAR_FEC_PAR_FEC_MII_FEC; + writeb(v, MCFGPIO_PAR_FEC); } /***************************************************************************/ @@ -298,7 +304,7 @@ asmlinkage void __init sysinit(void) void wtm_init(void) { /* Disable watchdog timer */ - MCF_WTM_WCR = 0; + writew(0, MCF_WTM_WCR); } #define MCF_SCM_BCR_GBW (0x00000100) @@ -307,53 +313,53 @@ void wtm_init(void) void scm_init(void) { /* All masters are trusted */ - MCF_SCM_MPR = 0x77777777; + writel(0x77777777, MCF_SCM_MPR); /* Allow supervisor/user, read/write, and trusted/untrusted access to all slaves */ - MCF_SCM_PACRA = 0; - MCF_SCM_PACRB = 0; - MCF_SCM_PACRC = 0; - MCF_SCM_PACRD = 0; - MCF_SCM_PACRE = 0; - MCF_SCM_PACRF = 0; + writel(0, MCF_SCM_PACRA); + writel(0, MCF_SCM_PACRB); + writel(0, MCF_SCM_PACRC); + writel(0, MCF_SCM_PACRD); + writel(0, MCF_SCM_PACRE); + writel(0, MCF_SCM_PACRF); /* Enable bursts */ - MCF_SCM_BCR = (MCF_SCM_BCR_GBR | MCF_SCM_BCR_GBW); + writel(MCF_SCM_BCR_GBR | MCF_SCM_BCR_GBW, MCF_SCM_BCR); } void fbcs_init(void) { - MCF_GPIO_PAR_CS = 0x0000003E; + writeb(0x3E, MCFGPIO_PAR_CS); /* Latch chip select */ - MCF_FBCS1_CSAR = 0x10080000; + writel(0x10080000, MCF_FBCS1_CSAR); - MCF_FBCS1_CSCR = 0x002A3780; - MCF_FBCS1_CSMR = (MCF_FBCS_CSMR_BAM_2M | MCF_FBCS_CSMR_V); + writel(0x002A3780, MCF_FBCS1_CSCR); + writel(MCF_FBCS_CSMR_BAM_2M | MCF_FBCS_CSMR_V, MCF_FBCS1_CSMR); /* Initialize latch to drive signals to inactive states */ - *((u16 *)(0x10080000)) = 0xFFFF; + writew(0xffff, 0x10080000); /* External SRAM */ - MCF_FBCS1_CSAR = EXT_SRAM_ADDRESS; - MCF_FBCS1_CSCR = (MCF_FBCS_CSCR_PS_16 - | MCF_FBCS_CSCR_AA - | MCF_FBCS_CSCR_SBM - | MCF_FBCS_CSCR_WS(1)); - MCF_FBCS1_CSMR = (MCF_FBCS_CSMR_BAM_512K - | MCF_FBCS_CSMR_V); + writel(EXT_SRAM_ADDRESS, MCF_FBCS1_CSAR); + writel(MCF_FBCS_CSCR_PS_16 | + MCF_FBCS_CSCR_AA | + MCF_FBCS_CSCR_SBM | + MCF_FBCS_CSCR_WS(1), + MCF_FBCS1_CSCR); + writel(MCF_FBCS_CSMR_BAM_512K | MCF_FBCS_CSMR_V, MCF_FBCS1_CSMR); /* Boot Flash connected to FBCS0 */ - MCF_FBCS0_CSAR = FLASH_ADDRESS; - MCF_FBCS0_CSCR = (MCF_FBCS_CSCR_PS_16 - | MCF_FBCS_CSCR_BEM - | MCF_FBCS_CSCR_AA - | MCF_FBCS_CSCR_SBM - | MCF_FBCS_CSCR_WS(7)); - MCF_FBCS0_CSMR = (MCF_FBCS_CSMR_BAM_32M - | MCF_FBCS_CSMR_V); + writel(FLASH_ADDRESS, MCF_FBCS0_CSAR); + writel(MCF_FBCS_CSCR_PS_16 | + MCF_FBCS_CSCR_BEM | + MCF_FBCS_CSCR_AA | + MCF_FBCS_CSCR_SBM | + MCF_FBCS_CSCR_WS(7), + MCF_FBCS0_CSCR); + writel(MCF_FBCS_CSMR_BAM_32M | MCF_FBCS_CSMR_V, MCF_FBCS0_CSMR); } void sdramc_init(void) @@ -362,102 +368,102 @@ void sdramc_init(void) * Check to see if the SDRAM has already been initialized * by a run control tool */ - if (!(MCF_SDRAMC_SDCR & MCF_SDRAMC_SDCR_REF)) { + if (!(readl(MCF_SDRAMC_SDCR) & MCF_SDRAMC_SDCR_REF)) { /* SDRAM chip select initialization */ /* Initialize SDRAM chip select */ - MCF_SDRAMC_SDCS0 = (0 - | MCF_SDRAMC_SDCS_BA(SDRAM_ADDRESS) - | MCF_SDRAMC_SDCS_CSSZ(MCF_SDRAMC_SDCS_CSSZ_32MBYTE)); + writel(MCF_SDRAMC_SDCS_BA(SDRAM_ADDRESS) | + MCF_SDRAMC_SDCS_CSSZ(MCF_SDRAMC_SDCS_CSSZ_32MBYTE), + MCF_SDRAMC_SDCS0); /* * Basic configuration and initialization */ - MCF_SDRAMC_SDCFG1 = (0 - | MCF_SDRAMC_SDCFG1_SRD2RW((int)((SDRAM_CASL + 2) + 0.5 )) - | MCF_SDRAMC_SDCFG1_SWT2RD(SDRAM_TWR + 1) - | MCF_SDRAMC_SDCFG1_RDLAT((int)((SDRAM_CASL*2) + 2)) - | MCF_SDRAMC_SDCFG1_ACT2RW((int)((SDRAM_TRCD ) + 0.5)) - | MCF_SDRAMC_SDCFG1_PRE2ACT((int)((SDRAM_TRP ) + 0.5)) - | MCF_SDRAMC_SDCFG1_REF2ACT((int)(((SDRAM_TRFC) ) + 0.5)) - | MCF_SDRAMC_SDCFG1_WTLAT(3)); - MCF_SDRAMC_SDCFG2 = (0 - | MCF_SDRAMC_SDCFG2_BRD2PRE(SDRAM_BL/2 + 1) - | MCF_SDRAMC_SDCFG2_BWT2RW(SDRAM_BL/2 + SDRAM_TWR) - | MCF_SDRAMC_SDCFG2_BRD2WT((int)((SDRAM_CASL+SDRAM_BL/2-1.0)+0.5)) - | MCF_SDRAMC_SDCFG2_BL(SDRAM_BL-1)); + writel(MCF_SDRAMC_SDCFG1_SRD2RW((int)((SDRAM_CASL + 2) + 0.5)) | + MCF_SDRAMC_SDCFG1_SWT2RD(SDRAM_TWR + 1) | + MCF_SDRAMC_SDCFG1_RDLAT((int)((SDRAM_CASL * 2) + 2)) | + MCF_SDRAMC_SDCFG1_ACT2RW((int)(SDRAM_TRCD + 0.5)) | + MCF_SDRAMC_SDCFG1_PRE2ACT((int)(SDRAM_TRP + 0.5)) | + MCF_SDRAMC_SDCFG1_REF2ACT((int)(SDRAM_TRFC + 0.5)) | + MCF_SDRAMC_SDCFG1_WTLAT(3), + MCF_SDRAMC_SDCFG1); + writel(MCF_SDRAMC_SDCFG2_BRD2PRE(SDRAM_BL / 2 + 1) | + MCF_SDRAMC_SDCFG2_BWT2RW(SDRAM_BL / 2 + SDRAM_TWR) | + MCF_SDRAMC_SDCFG2_BRD2WT((int)((SDRAM_CASL + SDRAM_BL / 2 - 1.0) + 0.5)) | + MCF_SDRAMC_SDCFG2_BL(SDRAM_BL - 1), + MCF_SDRAMC_SDCFG2); /* * Precharge and enable write to SDMR */ - MCF_SDRAMC_SDCR = (0 - | MCF_SDRAMC_SDCR_MODE_EN - | MCF_SDRAMC_SDCR_CKE - | MCF_SDRAMC_SDCR_DDR - | MCF_SDRAMC_SDCR_MUX(1) - | MCF_SDRAMC_SDCR_RCNT((int)(((SDRAM_TREFI/(SYSTEM_PERIOD*64)) - 1) + 0.5)) - | MCF_SDRAMC_SDCR_PS_16 - | MCF_SDRAMC_SDCR_IPALL); + writel(MCF_SDRAMC_SDCR_MODE_EN | + MCF_SDRAMC_SDCR_CKE | + MCF_SDRAMC_SDCR_DDR | + MCF_SDRAMC_SDCR_MUX(1) | + MCF_SDRAMC_SDCR_RCNT((int)(((SDRAM_TREFI / (SYSTEM_PERIOD * 64)) - 1) + 0.5)) | + MCF_SDRAMC_SDCR_PS_16 | + MCF_SDRAMC_SDCR_IPALL, + MCF_SDRAMC_SDCR); /* * Write extended mode register */ - MCF_SDRAMC_SDMR = (0 - | MCF_SDRAMC_SDMR_BNKAD_LEMR - | MCF_SDRAMC_SDMR_AD(0x0) - | MCF_SDRAMC_SDMR_CMD); + writel(MCF_SDRAMC_SDMR_BNKAD_LEMR | + MCF_SDRAMC_SDMR_AD(0x0) | + MCF_SDRAMC_SDMR_CMD, + MCF_SDRAMC_SDMR); /* * Write mode register and reset DLL */ - MCF_SDRAMC_SDMR = (0 - | MCF_SDRAMC_SDMR_BNKAD_LMR - | MCF_SDRAMC_SDMR_AD(0x163) - | MCF_SDRAMC_SDMR_CMD); + writel(MCF_SDRAMC_SDMR_BNKAD_LMR | + MCF_SDRAMC_SDMR_AD(0x163) | + MCF_SDRAMC_SDMR_CMD, + MCF_SDRAMC_SDMR); /* * Execute a PALL command */ - MCF_SDRAMC_SDCR |= MCF_SDRAMC_SDCR_IPALL; + writel(readl(MCF_SDRAMC_SDCR) | MCF_SDRAMC_SDCR_IPALL, MCF_SDRAMC_SDCR); /* * Perform two REF cycles */ - MCF_SDRAMC_SDCR |= MCF_SDRAMC_SDCR_IREF; - MCF_SDRAMC_SDCR |= MCF_SDRAMC_SDCR_IREF; + writel(readl(MCF_SDRAMC_SDCR) | MCF_SDRAMC_SDCR_IREF, MCF_SDRAMC_SDCR); + writel(readl(MCF_SDRAMC_SDCR) | MCF_SDRAMC_SDCR_IREF, MCF_SDRAMC_SDCR); /* * Write mode register and clear reset DLL */ - MCF_SDRAMC_SDMR = (0 - | MCF_SDRAMC_SDMR_BNKAD_LMR - | MCF_SDRAMC_SDMR_AD(0x063) - | MCF_SDRAMC_SDMR_CMD); + writel(MCF_SDRAMC_SDMR_BNKAD_LMR | + MCF_SDRAMC_SDMR_AD(0x063) | + MCF_SDRAMC_SDMR_CMD, + MCF_SDRAMC_SDMR); /* * Enable auto refresh and lock SDMR */ - MCF_SDRAMC_SDCR &= ~MCF_SDRAMC_SDCR_MODE_EN; - MCF_SDRAMC_SDCR |= (0 - | MCF_SDRAMC_SDCR_REF - | MCF_SDRAMC_SDCR_DQS_OE(0xC)); + writel(readl(MCF_SDRAMC_SDCR) & ~MCF_SDRAMC_SDCR_MODE_EN, + MCF_SDRAMC_SDCR); + writel(MCF_SDRAMC_SDCR_REF | MCF_SDRAMC_SDCR_DQS_OE(0xC), + MCF_SDRAMC_SDCR); } } void gpio_init(void) { /* Enable UART0 pins */ - MCF_GPIO_PAR_UART = ( 0 - | MCF_GPIO_PAR_UART_PAR_URXD0 - | MCF_GPIO_PAR_UART_PAR_UTXD0); - - /* Initialize TIN3 as a GPIO output to enable the write - half of the latch */ - MCF_GPIO_PAR_TIMER = 0x00; - __raw_writeb(0x08, MCFGPIO_PDDR_TIMER); - __raw_writeb(0x00, MCFGPIO_PCLRR_TIMER); + writew(MCF_GPIO_PAR_UART_PAR_URXD0 | MCF_GPIO_PAR_UART_PAR_UTXD0, + MCFGPIO_PAR_UART); + /* + * Initialize TIN3 as a GPIO output to enable the write + * half of the latch. + */ + writeb(0x00, MCFGPIO_PAR_TIMER); + writeb(0x08, MCFGPIO_PDDR_TIMER); + writeb(0x00, MCFGPIO_PCLRR_TIMER); } int clock_pll(int fsys, int flags) @@ -469,7 +475,7 @@ int clock_pll(int fsys, int flags) if (fsys == 0) { /* Return current PLL output */ - mfd = MCF_PLL_PFDR; + mfd = readb(MCF_PLL_PFDR); return (fref * mfd / (BUSDIV * 4)); } @@ -495,9 +501,10 @@ int clock_pll(int fsys, int flags) * If it has then the SDRAM needs to be put into self refresh * mode before reprogramming the PLL. */ - if (MCF_SDRAMC_SDCR & MCF_SDRAMC_SDCR_REF) + if (readl(MCF_SDRAMC_SDCR) & MCF_SDRAMC_SDCR_REF) /* Put SDRAM into self refresh mode */ - MCF_SDRAMC_SDCR &= ~MCF_SDRAMC_SDCR_CKE; + writel(readl(MCF_SDRAMC_SDCR) & ~MCF_SDRAMC_SDCR_CKE, + MCF_SDRAMC_SDCR); /* * Initialize the PLL to generate the new system clock frequency. @@ -508,11 +515,10 @@ int clock_pll(int fsys, int flags) clock_limp(DEFAULT_LPD); /* Reprogram PLL for desired fsys */ - MCF_PLL_PODR = (0 - | MCF_PLL_PODR_CPUDIV(BUSDIV/3) - | MCF_PLL_PODR_BUSDIV(BUSDIV)); + writeb(MCF_PLL_PODR_CPUDIV(BUSDIV/3) | MCF_PLL_PODR_BUSDIV(BUSDIV), + MCF_PLL_PODR); - MCF_PLL_PFDR = mfd; + writeb(mfd, MCF_PLL_PFDR); /* Exit LIMP mode */ clock_exit_limp(); @@ -520,12 +526,13 @@ int clock_pll(int fsys, int flags) /* * Return the SDRAM to normal operation if it is in use. */ - if (MCF_SDRAMC_SDCR & MCF_SDRAMC_SDCR_REF) + if (readl(MCF_SDRAMC_SDCR) & MCF_SDRAMC_SDCR_REF) /* Exit self refresh mode */ - MCF_SDRAMC_SDCR |= MCF_SDRAMC_SDCR_CKE; + writel(readl(MCF_SDRAMC_SDCR) | MCF_SDRAMC_SDCR_CKE, + MCF_SDRAMC_SDCR); /* Errata - workaround for SDRAM opeartion after exiting LIMP mode */ - MCF_SDRAMC_LIMP_FIX = MCF_SDRAMC_REFRESH; + writel(MCF_SDRAMC_REFRESH, MCF_SDRAMC_LIMP_FIX); /* wait for DQS logic to relock */ for (i = 0; i < 0x200; i++) @@ -546,14 +553,12 @@ int clock_limp(int div) /* Save of the current value of the SSIDIV so we don't overwrite the value*/ - temp = (MCF_CCM_CDR & MCF_CCM_CDR_SSIDIV(0xF)); + temp = readw(MCF_CCM_CDR) & MCF_CCM_CDR_SSIDIV(0xF); /* Apply the divider to the system clock */ - MCF_CCM_CDR = ( 0 - | MCF_CCM_CDR_LPDIV(div) - | MCF_CCM_CDR_SSIDIV(temp)); + writew(MCF_CCM_CDR_LPDIV(div) | MCF_CCM_CDR_SSIDIV(temp), MCF_CCM_CDR); - MCF_CCM_MISCCR |= MCF_CCM_MISCCR_LIMP; + writew(readw(MCF_CCM_MISCCR) | MCF_CCM_MISCCR_LIMP, MCF_CCM_MISCCR); return (FREF/(3*(1 << div))); } @@ -563,10 +568,10 @@ int clock_exit_limp(void) int fout; /* Exit LIMP mode */ - MCF_CCM_MISCCR = (MCF_CCM_MISCCR & ~ MCF_CCM_MISCCR_LIMP); + writew(readw(MCF_CCM_MISCCR) & ~MCF_CCM_MISCCR_LIMP, MCF_CCM_MISCCR); /* Wait for PLL to lock */ - while (!(MCF_CCM_MISCCR & MCF_CCM_MISCCR_PLL_LOCK)) + while (!(readw(MCF_CCM_MISCCR) & MCF_CCM_MISCCR_PLL_LOCK)) ; fout = get_sys_clock(); @@ -579,10 +584,10 @@ int get_sys_clock(void) int divider; /* Test to see if device is in LIMP mode */ - if (MCF_CCM_MISCCR & MCF_CCM_MISCCR_LIMP) { - divider = MCF_CCM_CDR & MCF_CCM_CDR_LPDIV(0xF); + if (readw(MCF_CCM_MISCCR) & MCF_CCM_MISCCR_LIMP) { + divider = readw(MCF_CCM_CDR) & MCF_CCM_CDR_LPDIV(0xF); return (FREF/(2 << divider)); } else - return ((FREF * MCF_PLL_PFDR) / (BUSDIV * 4)); + return (FREF * readb(MCF_PLL_PFDR)) / (BUSDIV * 4); } diff --git a/arch/m68k/platform/coldfire/m54xx.c b/arch/m68k/platform/coldfire/m54xx.c index 2081c6c..b587bf3 100644 --- a/arch/m68k/platform/coldfire/m54xx.c +++ b/arch/m68k/platform/coldfire/m54xx.c @@ -30,14 +30,12 @@ static void __init m54xx_uarts_init(void) { /* enable io pins */ - __raw_writeb(MCF_PAR_PSC_TXD | MCF_PAR_PSC_RXD, - MCF_MBAR + MCF_PAR_PSC(0)); + __raw_writeb(MCF_PAR_PSC_TXD | MCF_PAR_PSC_RXD, MCFGPIO_PAR_PSC0); __raw_writeb(MCF_PAR_PSC_TXD | MCF_PAR_PSC_RXD | MCF_PAR_PSC_RTS_RTS, - MCF_MBAR + MCF_PAR_PSC(1)); + MCFGPIO_PAR_PSC1); __raw_writeb(MCF_PAR_PSC_TXD | MCF_PAR_PSC_RXD | MCF_PAR_PSC_RTS_RTS | - MCF_PAR_PSC_CTS_CTS, MCF_MBAR + MCF_PAR_PSC(2)); - __raw_writeb(MCF_PAR_PSC_TXD | MCF_PAR_PSC_RXD, - MCF_MBAR + MCF_PAR_PSC(3)); + MCF_PAR_PSC_CTS_CTS, MCFGPIO_PAR_PSC2); + __raw_writeb(MCF_PAR_PSC_TXD | MCF_PAR_PSC_RXD, MCFGPIO_PAR_PSC3); } /***************************************************************************/ @@ -46,10 +44,10 @@ static void mcf54xx_reset(void) { /* disable interrupts and enable the watchdog */ asm("movew #0x2700, %sr\n"); - __raw_writel(0, MCF_MBAR + MCF_GPT_GMS0); - __raw_writel(MCF_GPT_GCIR_CNT(1), MCF_MBAR + MCF_GPT_GCIR0); + __raw_writel(0, MCF_GPT_GMS0); + __raw_writel(MCF_GPT_GCIR_CNT(1), MCF_GPT_GCIR0); __raw_writel(MCF_GPT_GMS_WDEN | MCF_GPT_GMS_CE | MCF_GPT_GMS_TMS(4), - MCF_MBAR + MCF_GPT_GMS0); + MCF_GPT_GMS0); } /***************************************************************************/ diff --git a/arch/m68k/platform/coldfire/nettel.c b/arch/m68k/platform/coldfire/nettel.c index e925ea4..ddc48ec 100644 --- a/arch/m68k/platform/coldfire/nettel.c +++ b/arch/m68k/platform/coldfire/nettel.c @@ -121,14 +121,14 @@ static void __init nettel_smc91x_setmac(unsigned int ioaddr, unsigned int flasha static void __init nettel_smc91x_init(void) { - writew(0x00ec, MCF_MBAR + MCFSIM_PADDR); + writew(0x00ec, MCFSIM_PADDR); mcf_setppdata(0, 0x0080); writew(1, NETTEL_SMC0_ADDR + SMC91xx_BANKSELECT); writew(0x0067, NETTEL_SMC0_ADDR + SMC91xx_BASEADDR); mcf_setppdata(0x0080, 0); /* Set correct chip select timing for SMC9196 accesses */ - writew(0x1180, MCF_MBAR + MCFSIM_CSCR3); + writew(0x1180, MCFSIM_CSCR3); /* Set the SMC interrupts to be auto-vectored */ mcf_autovector(NETTEL_SMC0_IRQ); diff --git a/arch/m68k/platform/coldfire/pci.c b/arch/m68k/platform/coldfire/pci.c index 553210d..8572246 100644 --- a/arch/m68k/platform/coldfire/pci.c +++ b/arch/m68k/platform/coldfire/pci.c @@ -272,8 +272,8 @@ static int __init mcf_pci_init(void) PACR_EXTMINTE(0x1f), PACR); /* Set required multi-function pins for PCI bus use */ - __raw_writew(0x3ff, MCF_PAR_PCIBG); - __raw_writew(0x3ff, MCF_PAR_PCIBR); + __raw_writew(0x3ff, MCFGPIO_PAR_PCIBG); + __raw_writew(0x3ff, MCFGPIO_PAR_PCIBR); /* Set up config space for local host bus controller */ __raw_writel(PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | diff --git a/arch/m68k/platform/coldfire/reset.c b/arch/m68k/platform/coldfire/reset.c index 933e54e..f30952f 100644 --- a/arch/m68k/platform/coldfire/reset.c +++ b/arch/m68k/platform/coldfire/reset.c @@ -27,7 +27,7 @@ static void mcf_cpu_reset(void) { local_irq_disable(); /* Set watchdog to soft reset, and enabled */ - __raw_writeb(0xc0, MCF_MBAR + MCFSIM_SYPCR); + __raw_writeb(0xc0, MCFSIM_SYPCR); for (;;) /* wait for watchdog to timeout */; } diff --git a/arch/m68k/platform/coldfire/sltimers.c b/arch/m68k/platform/coldfire/sltimers.c index 2027fc2..bb5a25a 100644 --- a/arch/m68k/platform/coldfire/sltimers.c +++ b/arch/m68k/platform/coldfire/sltimers.c @@ -32,7 +32,7 @@ /* * By default use Slice Timer 1 as the profiler clock timer. */ -#define PA(a) (MCF_MBAR + MCFSLT_TIMER1 + (a)) +#define PA(a) (MCFSLT_TIMER1 + (a)) /* * Choose a reasonably fast profile timer. Make it an odd value to @@ -76,7 +76,7 @@ void mcfslt_profile_init(void) /* * By default use Slice Timer 0 as the system clock timer. */ -#define TA(a) (MCF_MBAR + MCFSLT_TIMER0 + (a)) +#define TA(a) (MCFSLT_TIMER0 + (a)) static u32 mcfslt_cycles_per_jiffy; static u32 mcfslt_cnt; diff --git a/arch/m68k/platform/coldfire/timers.c b/arch/m68k/platform/coldfire/timers.c index 0a273e7..51f6d2a 100644 --- a/arch/m68k/platform/coldfire/timers.c +++ b/arch/m68k/platform/coldfire/timers.c @@ -56,13 +56,13 @@ static void init_timer_irq(void) #ifdef MCFSIM_ICR_AUTOVEC /* Timer1 is always used as system timer */ writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL6 | MCFSIM_ICR_PRI3, - MCF_MBAR + MCFSIM_TIMER1ICR); + MCFSIM_TIMER1ICR); mcf_mapirq2imr(MCF_IRQ_TIMER, MCFINTC_TIMER1); #ifdef CONFIG_HIGHPROFILE /* Timer2 is to be used as a high speed profile timer */ writeb(MCFSIM_ICR_AUTOVEC | MCFSIM_ICR_LEVEL7 | MCFSIM_ICR_PRI3, - MCF_MBAR + MCFSIM_TIMER2ICR); + MCFSIM_TIMER2ICR); mcf_mapirq2imr(MCF_IRQ_PROFILER, MCFINTC_TIMER2); #endif #endif /* MCFSIM_ICR_AUTOVEC */ diff --git a/arch/microblaze/Kconfig b/arch/microblaze/Kconfig index ab9afca..6133bed 100644 --- a/arch/microblaze/Kconfig +++ b/arch/microblaze/Kconfig @@ -243,14 +243,11 @@ choice config MICROBLAZE_4K_PAGES bool "4k page size" -config MICROBLAZE_8K_PAGES - bool "8k page size" - config MICROBLAZE_16K_PAGES bool "16k page size" -config MICROBLAZE_32K_PAGES - bool "32k page size" +config MICROBLAZE_64K_PAGES + bool "64k page size" endchoice diff --git a/arch/microblaze/include/asm/clinkage.h b/arch/microblaze/include/asm/clinkage.h deleted file mode 100644 index 9e21843..0000000 --- a/arch/microblaze/include/asm/clinkage.h +++ /dev/null @@ -1 +0,0 @@ -#include <linux/linkage.h> diff --git a/arch/microblaze/include/asm/io.h b/arch/microblaze/include/asm/io.h index 8cdac14..4fbfdc1 100644 --- a/arch/microblaze/include/asm/io.h +++ b/arch/microblaze/include/asm/io.h @@ -35,6 +35,10 @@ extern resource_size_t isa_mem_base; #define IO_SPACE_LIMIT (0xFFFFFFFF) +/* the following is needed to support PCI with some drivers */ + +#define mmiowb() + static inline unsigned char __raw_readb(const volatile void __iomem *addr) { return *(volatile unsigned char __force *)addr; @@ -248,4 +252,94 @@ static inline void __iomem *__ioremap(phys_addr_t address, unsigned long size, #define ioport_map(port, nr) ((void __iomem *)(port)) #define ioport_unmap(addr) +/* from asm-generic/io.h */ +#ifndef insb +static inline void insb(unsigned long addr, void *buffer, int count) +{ + if (count) { + u8 *buf = buffer; + do { + u8 x = inb(addr); + *buf++ = x; + } while (--count); + } +} +#endif + +#ifndef insw +static inline void insw(unsigned long addr, void *buffer, int count) +{ + if (count) { + u16 *buf = buffer; + do { + u16 x = inw(addr); + *buf++ = x; + } while (--count); + } +} +#endif + +#ifndef insl +static inline void insl(unsigned long addr, void *buffer, int count) +{ + if (count) { + u32 *buf = buffer; + do { + u32 x = inl(addr); + *buf++ = x; + } while (--count); + } +} +#endif + +#ifndef outsb +static inline void outsb(unsigned long addr, const void *buffer, int count) +{ + if (count) { + const u8 *buf = buffer; + do { + outb(*buf++, addr); + } while (--count); + } +} +#endif + +#ifndef outsw +static inline void outsw(unsigned long addr, const void *buffer, int count) +{ + if (count) { + const u16 *buf = buffer; + do { + outw(*buf++, addr); + } while (--count); + } +} +#endif + +#ifndef outsl +static inline void outsl(unsigned long addr, const void *buffer, int count) +{ + if (count) { + const u32 *buf = buffer; + do { + outl(*buf++, addr); + } while (--count); + } +} +#endif + +#define ioread8_rep(p, dst, count) \ + insb((unsigned long) (p), (dst), (count)) +#define ioread16_rep(p, dst, count) \ + insw((unsigned long) (p), (dst), (count)) +#define ioread32_rep(p, dst, count) \ + insl((unsigned long) (p), (dst), (count)) + +#define iowrite8_rep(p, src, count) \ + outsb((unsigned long) (p), (src), (count)) +#define iowrite16_rep(p, src, count) \ + outsw((unsigned long) (p), (src), (count)) +#define iowrite32_rep(p, src, count) \ + outsl((unsigned long) (p), (src), (count)) + #endif /* _ASM_MICROBLAZE_IO_H */ diff --git a/arch/microblaze/include/asm/page.h b/arch/microblaze/include/asm/page.h index 287c548..85a5ae8 100644 --- a/arch/microblaze/include/asm/page.h +++ b/arch/microblaze/include/asm/page.h @@ -23,12 +23,10 @@ #ifdef __KERNEL__ /* PAGE_SHIFT determines the page size */ -#if defined(CONFIG_MICROBLAZE_32K_PAGES) -#define PAGE_SHIFT 15 +#if defined(CONFIG_MICROBLAZE_64K_PAGES) +#define PAGE_SHIFT 16 #elif defined(CONFIG_MICROBLAZE_16K_PAGES) #define PAGE_SHIFT 14 -#elif defined(CONFIG_MICROBLAZE_8K_PAGES) -#define PAGE_SHIFT 13 #else #define PAGE_SHIFT 12 #endif @@ -37,6 +35,8 @@ #define LOAD_OFFSET ASM_CONST((CONFIG_KERNEL_START-CONFIG_KERNEL_BASE_ADDR)) +#define PTE_SHIFT (PAGE_SHIFT - 2) /* 1024 ptes per page */ + #ifndef __ASSEMBLY__ /* MS be sure that SLAB allocates aligned objects */ @@ -71,7 +71,6 @@ extern unsigned int __page_offset; * The basic type of a PTE - 32 bit physical addressing. */ typedef unsigned long pte_basic_t; -#define PTE_SHIFT (PAGE_SHIFT - 2) /* 1024 ptes per page */ #define PTE_FMT "%.8lx" #endif /* CONFIG_MMU */ diff --git a/arch/microblaze/include/asm/pci.h b/arch/microblaze/include/asm/pci.h index a0da88b..41cc841 100644 --- a/arch/microblaze/include/asm/pci.h +++ b/arch/microblaze/include/asm/pci.h @@ -22,6 +22,8 @@ #include <asm/prom.h> #include <asm/pci-bridge.h> +#include <asm-generic/pci-dma-compat.h> + #define PCIBIOS_MIN_IO 0x1000 #define PCIBIOS_MIN_MEM 0x10000000 diff --git a/arch/microblaze/include/asm/pgtable.h b/arch/microblaze/include/asm/pgtable.h index 3ef7b9c..a7311cd 100644 --- a/arch/microblaze/include/asm/pgtable.h +++ b/arch/microblaze/include/asm/pgtable.h @@ -234,12 +234,6 @@ static inline pte_t pte_mkspecial(pte_t pte) { return pte; } #ifndef _PAGE_SHARED #define _PAGE_SHARED 0 #endif -#ifndef _PAGE_HWWRITE -#define _PAGE_HWWRITE 0 -#endif -#ifndef _PAGE_HWEXEC -#define _PAGE_HWEXEC 0 -#endif #ifndef _PAGE_EXEC #define _PAGE_EXEC 0 #endif diff --git a/arch/microblaze/kernel/head.S b/arch/microblaze/kernel/head.S index 98b17f9..eef84de 100644 --- a/arch/microblaze/kernel/head.S +++ b/arch/microblaze/kernel/head.S @@ -109,20 +109,24 @@ no_fdt_arg: #ifndef CONFIG_CMDLINE_BOOL /* * handling command line - * copy command line to __init_end. There is space for storing command line. + * copy command line directly to cmd_line placed in data section. */ + beqid r5, skip /* Skip if NULL pointer */ or r6, r0, r0 /* incremment */ - ori r4, r0, __init_end /* load address of command line */ + ori r4, r0, cmd_line /* load address of command line */ tophys(r4,r4) /* convert to phys address */ ori r3, r0, COMMAND_LINE_SIZE - 1 /* number of loops */ _copy_command_line: - lbu r2, r5, r6 /* r2=r5+r6 - r5 contain pointer to command line */ - sb r2, r4, r6 /* addr[r4+r6]= r2*/ + /* r2=r5+r6 - r5 contain pointer to command line */ + lbu r2, r5, r6 + beqid r2, skip /* Skip if no data */ + sb r2, r4, r6 /* addr[r4+r6]= r2*/ addik r6, r6, 1 /* increment counting */ bgtid r3, _copy_command_line /* loop for all entries */ - addik r3, r3, -1 /* descrement loop */ + addik r3, r3, -1 /* decrement loop */ addik r5, r4, 0 /* add new space for command line */ tovirt(r5,r5) +skip: #endif /* CONFIG_CMDLINE_BOOL */ #ifdef NOT_COMPILE diff --git a/arch/microblaze/kernel/hw_exception_handler.S b/arch/microblaze/kernel/hw_exception_handler.S index aa510f4..61b3a1f 100644 --- a/arch/microblaze/kernel/hw_exception_handler.S +++ b/arch/microblaze/kernel/hw_exception_handler.S @@ -75,6 +75,7 @@ #include <asm/mmu.h> #include <asm/pgtable.h> #include <asm/signal.h> +#include <asm/registers.h> #include <asm/asm-offsets.h> #undef DEBUG @@ -581,7 +582,7 @@ ex_handler_done: * tried to access a kernel or read-protected page - always * a SEGV). All other faults here must be stores, so no * need to check ESR_S as well. */ - andi r4, r4, 0x800 /* ESR_Z - zone protection */ + andi r4, r4, ESR_DIZ /* ESR_Z - zone protection */ bnei r4, ex2 ori r4, r0, swapper_pg_dir @@ -595,25 +596,25 @@ ex_handler_done: * tried to access a kernel or read-protected page - always * a SEGV). All other faults here must be stores, so no * need to check ESR_S as well. */ - andi r4, r4, 0x800 /* ESR_Z */ + andi r4, r4, ESR_DIZ /* ESR_Z */ bnei r4, ex2 /* get current task address */ addi r4 ,CURRENT_TASK, TOPHYS(0); lwi r4, r4, TASK_THREAD+PGDIR ex4: tophys(r4,r4) - BSRLI(r5,r3,20) /* Create L1 (pgdir/pmd) address */ - andi r5, r5, 0xffc + /* Create L1 (pgdir/pmd) address */ + BSRLI(r5,r3, PGDIR_SHIFT - 2) + andi r5, r5, PAGE_SIZE - 4 /* Assume pgdir aligned on 4K boundary, no need for "andi r4,r4,0xfffff003" */ or r4, r4, r5 lwi r4, r4, 0 /* Get L1 entry */ - andi r5, r4, 0xfffff000 /* Extract L2 (pte) base address */ + andi r5, r4, PAGE_MASK /* Extract L2 (pte) base address */ beqi r5, ex2 /* Bail if no table */ tophys(r5,r5) - BSRLI(r6,r3,10) /* Compute PTE address */ - andi r6, r6, 0xffc - andi r5, r5, 0xfffff003 + BSRLI(r6,r3,PTE_SHIFT) /* Compute PTE address */ + andi r6, r6, PAGE_SIZE - 4 or r5, r5, r6 lwi r4, r5, 0 /* Get Linux PTE */ @@ -632,7 +633,9 @@ ex_handler_done: * Many of these bits are software only. Bits we don't set * here we (properly should) assume have the appropriate value. */ - andni r4, r4, 0x0ce2 /* Make sure 20, 21 are zero */ +/* Ignore memory coherent, just LSB on ZSEL is used + EX/WR */ + andi r4, r4, PAGE_MASK | TLB_EX | TLB_WR | \ + TLB_ZSEL(1) | TLB_ATTR_MASK ori r4, r4, _PAGE_HWEXEC /* make it executable */ /* find the TLB index that caused the fault. It has to be here*/ @@ -701,18 +704,18 @@ ex_handler_done: lwi r4, r4, TASK_THREAD+PGDIR ex6: tophys(r4,r4) - BSRLI(r5,r3,20) /* Create L1 (pgdir/pmd) address */ - andi r5, r5, 0xffc + /* Create L1 (pgdir/pmd) address */ + BSRLI(r5,r3, PGDIR_SHIFT - 2) + andi r5, r5, PAGE_SIZE - 4 /* Assume pgdir aligned on 4K boundary, no need for "andi r4,r4,0xfffff003" */ or r4, r4, r5 lwi r4, r4, 0 /* Get L1 entry */ - andi r5, r4, 0xfffff000 /* Extract L2 (pte) base address */ + andi r5, r4, PAGE_MASK /* Extract L2 (pte) base address */ beqi r5, ex7 /* Bail if no table */ tophys(r5,r5) - BSRLI(r6,r3,10) /* Compute PTE address */ - andi r6, r6, 0xffc - andi r5, r5, 0xfffff003 + BSRLI(r6,r3,PTE_SHIFT) /* Compute PTE address */ + andi r6, r6, PAGE_SIZE - 4 or r5, r5, r6 lwi r4, r5, 0 /* Get Linux PTE */ @@ -731,7 +734,8 @@ ex_handler_done: * here we (properly should) assume have the appropriate value. */ brid finish_tlb_load - andni r4, r4, 0x0ce2 /* Make sure 20, 21 are zero */ + andi r4, r4, PAGE_MASK | TLB_EX | TLB_WR | \ + TLB_ZSEL(1) | TLB_ATTR_MASK ex7: /* The bailout. Restore registers to pre-exception conditions * and call the heavyweights to help us out. @@ -771,18 +775,18 @@ ex_handler_done: lwi r4, r4, TASK_THREAD+PGDIR ex9: tophys(r4,r4) - BSRLI(r5,r3,20) /* Create L1 (pgdir/pmd) address */ - andi r5, r5, 0xffc + /* Create L1 (pgdir/pmd) address */ + BSRLI(r5,r3, PGDIR_SHIFT - 2) + andi r5, r5, PAGE_SIZE - 4 /* Assume pgdir aligned on 4K boundary, no need for "andi r4,r4,0xfffff003" */ or r4, r4, r5 lwi r4, r4, 0 /* Get L1 entry */ - andi r5, r4, 0xfffff000 /* Extract L2 (pte) base address */ + andi r5, r4, PAGE_MASK /* Extract L2 (pte) base address */ beqi r5, ex10 /* Bail if no table */ tophys(r5,r5) - BSRLI(r6,r3,10) /* Compute PTE address */ - andi r6, r6, 0xffc - andi r5, r5, 0xfffff003 + BSRLI(r6,r3,PTE_SHIFT) /* Compute PTE address */ + andi r6, r6, PAGE_SIZE - 4 or r5, r5, r6 lwi r4, r5, 0 /* Get Linux PTE */ @@ -801,7 +805,8 @@ ex_handler_done: * here we (properly should) assume have the appropriate value. */ brid finish_tlb_load - andni r4, r4, 0x0ce2 /* Make sure 20, 21 are zero */ + andi r4, r4, PAGE_MASK | TLB_EX | TLB_WR | \ + TLB_ZSEL(1) | TLB_ATTR_MASK ex10: /* The bailout. Restore registers to pre-exception conditions * and call the heavyweights to help us out. @@ -854,8 +859,14 @@ ex_handler_done: * set of bits. These are size, valid, E, U0, and ensure * bits 20 and 21 are zero. */ - andi r3, r3, 0xfffff000 - ori r3, r3, 0x0c0 + andi r3, r3, PAGE_MASK +#ifdef CONFIG_MICROBLAZE_64K_PAGES + ori r3, r3, TLB_VALID | TLB_PAGESZ(PAGESZ_64K) +#elif CONFIG_MICROBLAZE_16K_PAGES + ori r3, r3, TLB_VALID | TLB_PAGESZ(PAGESZ_16K) +#else + ori r3, r3, TLB_VALID | TLB_PAGESZ(PAGESZ_4K) +#endif mts rtlbhi, r3 /* Load TLB HI */ nop diff --git a/arch/microblaze/kernel/reset.c b/arch/microblaze/kernel/reset.c index 88a0163..2e5079a 100644 --- a/arch/microblaze/kernel/reset.c +++ b/arch/microblaze/kernel/reset.c @@ -26,13 +26,14 @@ void of_platform_reset_gpio_probe(void) "hard-reset-gpios", 0); if (!gpio_is_valid(handle)) { - printk(KERN_INFO "Skipping unavailable RESET gpio %d (%s)\n", + pr_info("Skipping unavailable RESET gpio %d (%s)\n", handle, "reset"); + return; } ret = gpio_request(handle, "reset"); if (ret < 0) { - printk(KERN_INFO "GPIO pin is already allocated\n"); + pr_info("GPIO pin is already allocated\n"); return; } @@ -49,7 +50,7 @@ void of_platform_reset_gpio_probe(void) /* Setup output direction */ gpio_set_value(handle, 0); - printk(KERN_INFO "RESET: Registered gpio device: %d, current val: %d\n", + pr_info("RESET: Registered gpio device: %d, current val: %d\n", handle, reset_val); return; err: @@ -60,7 +61,10 @@ err: static void gpio_system_reset(void) { - gpio_set_value(handle, 1 - reset_val); + if (gpio_is_valid(handle)) + gpio_set_value(handle, 1 - reset_val); + else + pr_notice("Reset GPIO unavailable - halting!\n"); } #else #define gpio_system_reset() do {} while (0) @@ -72,30 +76,29 @@ void of_platform_reset_gpio_probe(void) void machine_restart(char *cmd) { - printk(KERN_NOTICE "Machine restart...\n"); + pr_notice("Machine restart...\n"); gpio_system_reset(); - dump_stack(); while (1) ; } void machine_shutdown(void) { - printk(KERN_NOTICE "Machine shutdown...\n"); + pr_notice("Machine shutdown...\n"); while (1) ; } void machine_halt(void) { - printk(KERN_NOTICE "Machine halt...\n"); + pr_notice("Machine halt...\n"); while (1) ; } void machine_power_off(void) { - printk(KERN_NOTICE "Machine power off...\n"); + pr_notice("Machine power off...\n"); while (1) ; } diff --git a/arch/microblaze/kernel/setup.c b/arch/microblaze/kernel/setup.c index 4da971d..954348f 100644 --- a/arch/microblaze/kernel/setup.c +++ b/arch/microblaze/kernel/setup.c @@ -40,7 +40,12 @@ DEFINE_PER_CPU(unsigned int, R11_SAVE); /* Temp variable for entry */ DEFINE_PER_CPU(unsigned int, CURRENT_SAVE); /* Saved current pointer */ unsigned int boot_cpuid; -char cmd_line[COMMAND_LINE_SIZE]; +/* + * Placed cmd_line to .data section because can be initialized from + * ASM code. Default position is BSS section which is cleared + * in machine_early_init(). + */ +char cmd_line[COMMAND_LINE_SIZE] __attribute__ ((section(".data"))); void __init setup_arch(char **cmdline_p) { @@ -64,7 +69,7 @@ void __init setup_arch(char **cmdline_p) xilinx_pci_init(); #if defined(CONFIG_SELFMOD_INTC) || defined(CONFIG_SELFMOD_TIMER) - printk(KERN_NOTICE "Self modified code enable\n"); + pr_notice("Self modified code enable\n"); #endif #ifdef CONFIG_VT @@ -130,12 +135,6 @@ void __init machine_early_init(const char *cmdline, unsigned int ram, memset(__bss_start, 0, __bss_stop-__bss_start); memset(_ssbss, 0, _esbss-_ssbss); - /* Copy command line passed from bootloader */ -#ifndef CONFIG_CMDLINE_BOOL - if (cmdline && cmdline[0] != '\0') - strlcpy(cmd_line, cmdline, COMMAND_LINE_SIZE); -#endif - lockdep_init(); /* initialize device tree for usage in early_printk */ diff --git a/arch/microblaze/kernel/signal.c b/arch/microblaze/kernel/signal.c index 76b9722..c1220db 100644 --- a/arch/microblaze/kernel/signal.c +++ b/arch/microblaze/kernel/signal.c @@ -290,15 +290,7 @@ handle_restart(struct pt_regs *regs, struct k_sigaction *ka, int has_handler) case -ERESTARTNOINTR: do_restart: /* offset of 4 bytes to re-execute trap (brki) instruction */ -#ifndef CONFIG_MMU regs->pc -= 4; -#else - /* offset of 8 bytes required = 4 for rtbd - offset, plus 4 for size of - "brki r14,8" - instruction. */ - regs->pc -= 8; -#endif break; } } diff --git a/arch/microblaze/kernel/timer.c b/arch/microblaze/kernel/timer.c index 522defa..aec5020 100644 --- a/arch/microblaze/kernel/timer.c +++ b/arch/microblaze/kernel/timer.c @@ -116,21 +116,21 @@ static void microblaze_timer_set_mode(enum clock_event_mode mode, { switch (mode) { case CLOCK_EVT_MODE_PERIODIC: - printk(KERN_INFO "%s: periodic\n", __func__); + pr_info("%s: periodic\n", __func__); microblaze_timer0_start_periodic(freq_div_hz); break; case CLOCK_EVT_MODE_ONESHOT: - printk(KERN_INFO "%s: oneshot\n", __func__); + pr_info("%s: oneshot\n", __func__); break; case CLOCK_EVT_MODE_UNUSED: - printk(KERN_INFO "%s: unused\n", __func__); + pr_info("%s: unused\n", __func__); break; case CLOCK_EVT_MODE_SHUTDOWN: - printk(KERN_INFO "%s: shutdown\n", __func__); + pr_info("%s: shutdown\n", __func__); microblaze_timer0_stop(); break; case CLOCK_EVT_MODE_RESUME: - printk(KERN_INFO "%s: resume\n", __func__); + pr_info("%s: resume\n", __func__); break; } } @@ -257,7 +257,15 @@ void __init time_init(void) 0 }; #endif - timer = of_find_compatible_node(NULL, NULL, "xlnx,xps-timer-1.00.a"); + prop = of_get_property(of_chosen, "system-timer", NULL); + if (prop) + timer = of_find_node_by_phandle(be32_to_cpup(prop)); + else + pr_info("No chosen timer found, using default\n"); + + if (!timer) + timer = of_find_compatible_node(NULL, NULL, + "xlnx,xps-timer-1.00.a"); BUG_ON(!timer); timer_baseaddr = be32_to_cpup(of_get_property(timer, "reg", NULL)); @@ -266,14 +274,14 @@ void __init time_init(void) timer_num = be32_to_cpup(of_get_property(timer, "xlnx,one-timer-only", NULL)); if (timer_num) { - printk(KERN_EMERG "Please enable two timers in HW\n"); + pr_emerg("Please enable two timers in HW\n"); BUG(); } #ifdef CONFIG_SELFMOD_TIMER selfmod_function((int *) arr_func, timer_baseaddr); #endif - printk(KERN_INFO "%s #0 at 0x%08x, irq=%d\n", + pr_info("%s #0 at 0x%08x, irq=%d\n", timer->name, timer_baseaddr, irq); /* If there is clock-frequency property than use it */ diff --git a/arch/s390/Kconfig b/arch/s390/Kconfig index f9acddd..c8af429 100644 --- a/arch/s390/Kconfig +++ b/arch/s390/Kconfig @@ -656,7 +656,6 @@ config S390_GUEST depends on 64BIT && EXPERIMENTAL select VIRTUALIZATION select VIRTIO - select VIRTIO_RING select VIRTIO_CONSOLE help Enabling this option adds support for virtio based paravirtual device diff --git a/arch/x86/lguest/Kconfig b/arch/x86/lguest/Kconfig index 6e121a2..7872a33 100644 --- a/arch/x86/lguest/Kconfig +++ b/arch/x86/lguest/Kconfig @@ -4,7 +4,6 @@ config LGUEST_GUEST depends on X86_32 select VIRTUALIZATION select VIRTIO - select VIRTIO_RING select VIRTIO_CONSOLE help Lguest is a tiny in-kernel hypervisor. Selecting this will diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c index c0bbeb4..0bdde8f 100644 --- a/drivers/block/virtio_blk.c +++ b/drivers/block/virtio_blk.c @@ -14,6 +14,9 @@ #define PART_BITS 4 +static bool use_bio; +module_param(use_bio, bool, S_IRUGO); + static int major; static DEFINE_IDA(vd_index_ida); @@ -23,6 +26,7 @@ struct virtio_blk { struct virtio_device *vdev; struct virtqueue *vq; + wait_queue_head_t queue_wait; /* The disk structure for the kernel. */ struct gendisk *disk; @@ -51,53 +55,244 @@ struct virtio_blk struct virtblk_req { struct request *req; + struct bio *bio; struct virtio_blk_outhdr out_hdr; struct virtio_scsi_inhdr in_hdr; + struct work_struct work; + struct virtio_blk *vblk; + int flags; u8 status; + struct scatterlist sg[]; +}; + +enum { + VBLK_IS_FLUSH = 1, + VBLK_REQ_FLUSH = 2, + VBLK_REQ_DATA = 4, + VBLK_REQ_FUA = 8, }; -static void blk_done(struct virtqueue *vq) +static inline int virtblk_result(struct virtblk_req *vbr) +{ + switch (vbr->status) { + case VIRTIO_BLK_S_OK: + return 0; + case VIRTIO_BLK_S_UNSUPP: + return -ENOTTY; + default: + return -EIO; + } +} + +static inline struct virtblk_req *virtblk_alloc_req(struct virtio_blk *vblk, + gfp_t gfp_mask) { - struct virtio_blk *vblk = vq->vdev->priv; struct virtblk_req *vbr; - unsigned int len; - unsigned long flags; - spin_lock_irqsave(vblk->disk->queue->queue_lock, flags); - while ((vbr = virtqueue_get_buf(vblk->vq, &len)) != NULL) { - int error; + vbr = mempool_alloc(vblk->pool, gfp_mask); + if (!vbr) + return NULL; - switch (vbr->status) { - case VIRTIO_BLK_S_OK: - error = 0; - break; - case VIRTIO_BLK_S_UNSUPP: - error = -ENOTTY; - break; - default: - error = -EIO; + vbr->vblk = vblk; + if (use_bio) + sg_init_table(vbr->sg, vblk->sg_elems); + + return vbr; +} + +static void virtblk_add_buf_wait(struct virtio_blk *vblk, + struct virtblk_req *vbr, + unsigned long out, + unsigned long in) +{ + DEFINE_WAIT(wait); + + for (;;) { + prepare_to_wait_exclusive(&vblk->queue_wait, &wait, + TASK_UNINTERRUPTIBLE); + + spin_lock_irq(vblk->disk->queue->queue_lock); + if (virtqueue_add_buf(vblk->vq, vbr->sg, out, in, vbr, + GFP_ATOMIC) < 0) { + spin_unlock_irq(vblk->disk->queue->queue_lock); + io_schedule(); + } else { + virtqueue_kick(vblk->vq); + spin_unlock_irq(vblk->disk->queue->queue_lock); break; } - switch (vbr->req->cmd_type) { - case REQ_TYPE_BLOCK_PC: - vbr->req->resid_len = vbr->in_hdr.residual; - vbr->req->sense_len = vbr->in_hdr.sense_len; - vbr->req->errors = vbr->in_hdr.errors; - break; - case REQ_TYPE_SPECIAL: - vbr->req->errors = (error != 0); - break; - default: - break; + } + + finish_wait(&vblk->queue_wait, &wait); +} + +static inline void virtblk_add_req(struct virtblk_req *vbr, + unsigned int out, unsigned int in) +{ + struct virtio_blk *vblk = vbr->vblk; + + spin_lock_irq(vblk->disk->queue->queue_lock); + if (unlikely(virtqueue_add_buf(vblk->vq, vbr->sg, out, in, vbr, + GFP_ATOMIC) < 0)) { + spin_unlock_irq(vblk->disk->queue->queue_lock); + virtblk_add_buf_wait(vblk, vbr, out, in); + return; + } + virtqueue_kick(vblk->vq); + spin_unlock_irq(vblk->disk->queue->queue_lock); +} + +static int virtblk_bio_send_flush(struct virtblk_req *vbr) +{ + unsigned int out = 0, in = 0; + + vbr->flags |= VBLK_IS_FLUSH; + vbr->out_hdr.type = VIRTIO_BLK_T_FLUSH; + vbr->out_hdr.sector = 0; + vbr->out_hdr.ioprio = 0; + sg_set_buf(&vbr->sg[out++], &vbr->out_hdr, sizeof(vbr->out_hdr)); + sg_set_buf(&vbr->sg[out + in++], &vbr->status, sizeof(vbr->status)); + + virtblk_add_req(vbr, out, in); + + return 0; +} + +static int virtblk_bio_send_data(struct virtblk_req *vbr) +{ + struct virtio_blk *vblk = vbr->vblk; + unsigned int num, out = 0, in = 0; + struct bio *bio = vbr->bio; + + vbr->flags &= ~VBLK_IS_FLUSH; + vbr->out_hdr.type = 0; + vbr->out_hdr.sector = bio->bi_sector; + vbr->out_hdr.ioprio = bio_prio(bio); + + sg_set_buf(&vbr->sg[out++], &vbr->out_hdr, sizeof(vbr->out_hdr)); + + num = blk_bio_map_sg(vblk->disk->queue, bio, vbr->sg + out); + + sg_set_buf(&vbr->sg[num + out + in++], &vbr->status, + sizeof(vbr->status)); + + if (num) { + if (bio->bi_rw & REQ_WRITE) { + vbr->out_hdr.type |= VIRTIO_BLK_T_OUT; + out += num; + } else { + vbr->out_hdr.type |= VIRTIO_BLK_T_IN; + in += num; } + } + + virtblk_add_req(vbr, out, in); + + return 0; +} + +static void virtblk_bio_send_data_work(struct work_struct *work) +{ + struct virtblk_req *vbr; + + vbr = container_of(work, struct virtblk_req, work); + + virtblk_bio_send_data(vbr); +} + +static void virtblk_bio_send_flush_work(struct work_struct *work) +{ + struct virtblk_req *vbr; + + vbr = container_of(work, struct virtblk_req, work); + + virtblk_bio_send_flush(vbr); +} + +static inline void virtblk_request_done(struct virtblk_req *vbr) +{ + struct virtio_blk *vblk = vbr->vblk; + struct request *req = vbr->req; + int error = virtblk_result(vbr); + + if (req->cmd_type == REQ_TYPE_BLOCK_PC) { + req->resid_len = vbr->in_hdr.residual; + req->sense_len = vbr->in_hdr.sense_len; + req->errors = vbr->in_hdr.errors; + } else if (req->cmd_type == REQ_TYPE_SPECIAL) { + req->errors = (error != 0); + } + + __blk_end_request_all(req, error); + mempool_free(vbr, vblk->pool); +} + +static inline void virtblk_bio_flush_done(struct virtblk_req *vbr) +{ + struct virtio_blk *vblk = vbr->vblk; + + if (vbr->flags & VBLK_REQ_DATA) { + /* Send out the actual write data */ + INIT_WORK(&vbr->work, virtblk_bio_send_data_work); + queue_work(virtblk_wq, &vbr->work); + } else { + bio_endio(vbr->bio, virtblk_result(vbr)); + mempool_free(vbr, vblk->pool); + } +} + +static inline void virtblk_bio_data_done(struct virtblk_req *vbr) +{ + struct virtio_blk *vblk = vbr->vblk; - __blk_end_request_all(vbr->req, error); + if (unlikely(vbr->flags & VBLK_REQ_FUA)) { + /* Send out a flush before end the bio */ + vbr->flags &= ~VBLK_REQ_DATA; + INIT_WORK(&vbr->work, virtblk_bio_send_flush_work); + queue_work(virtblk_wq, &vbr->work); + } else { + bio_endio(vbr->bio, virtblk_result(vbr)); mempool_free(vbr, vblk->pool); } +} + +static inline void virtblk_bio_done(struct virtblk_req *vbr) +{ + if (unlikely(vbr->flags & VBLK_IS_FLUSH)) + virtblk_bio_flush_done(vbr); + else + virtblk_bio_data_done(vbr); +} + +static void virtblk_done(struct virtqueue *vq) +{ + struct virtio_blk *vblk = vq->vdev->priv; + bool bio_done = false, req_done = false; + struct virtblk_req *vbr; + unsigned long flags; + unsigned int len; + + spin_lock_irqsave(vblk->disk->queue->queue_lock, flags); + do { + virtqueue_disable_cb(vq); + while ((vbr = virtqueue_get_buf(vblk->vq, &len)) != NULL) { + if (vbr->bio) { + virtblk_bio_done(vbr); + bio_done = true; + } else { + virtblk_request_done(vbr); + req_done = true; + } + } + } while (!virtqueue_enable_cb(vq)); /* In case queue is stopped waiting for more buffers. */ - blk_start_queue(vblk->disk->queue); + if (req_done) + blk_start_queue(vblk->disk->queue); spin_unlock_irqrestore(vblk->disk->queue->queue_lock, flags); + + if (bio_done) + wake_up(&vblk->queue_wait); } static bool do_req(struct request_queue *q, struct virtio_blk *vblk, @@ -106,13 +301,13 @@ static bool do_req(struct request_queue *q, struct virtio_blk *vblk, unsigned long num, out = 0, in = 0; struct virtblk_req *vbr; - vbr = mempool_alloc(vblk->pool, GFP_ATOMIC); + vbr = virtblk_alloc_req(vblk, GFP_ATOMIC); if (!vbr) /* When another request finishes we'll try again. */ return false; vbr->req = req; - + vbr->bio = NULL; if (req->cmd_flags & REQ_FLUSH) { vbr->out_hdr.type = VIRTIO_BLK_T_FLUSH; vbr->out_hdr.sector = 0; @@ -172,7 +367,8 @@ static bool do_req(struct request_queue *q, struct virtio_blk *vblk, } } - if (virtqueue_add_buf(vblk->vq, vblk->sg, out, in, vbr, GFP_ATOMIC)<0) { + if (virtqueue_add_buf(vblk->vq, vblk->sg, out, in, vbr, + GFP_ATOMIC) < 0) { mempool_free(vbr, vblk->pool); return false; } @@ -180,7 +376,7 @@ static bool do_req(struct request_queue *q, struct virtio_blk *vblk, return true; } -static void do_virtblk_request(struct request_queue *q) +static void virtblk_request(struct request_queue *q) { struct virtio_blk *vblk = q->queuedata; struct request *req; @@ -203,6 +399,34 @@ static void do_virtblk_request(struct request_queue *q) virtqueue_kick(vblk->vq); } +static void virtblk_make_request(struct request_queue *q, struct bio *bio) +{ + struct virtio_blk *vblk = q->queuedata; + struct virtblk_req *vbr; + + BUG_ON(bio->bi_phys_segments + 2 > vblk->sg_elems); + + vbr = virtblk_alloc_req(vblk, GFP_NOIO); + if (!vbr) { + bio_endio(bio, -ENOMEM); + return; + } + + vbr->bio = bio; + vbr->flags = 0; + if (bio->bi_rw & REQ_FLUSH) + vbr->flags |= VBLK_REQ_FLUSH; + if (bio->bi_rw & REQ_FUA) + vbr->flags |= VBLK_REQ_FUA; + if (bio->bi_size) + vbr->flags |= VBLK_REQ_DATA; + + if (unlikely(vbr->flags & VBLK_REQ_FLUSH)) + virtblk_bio_send_flush(vbr); + else + virtblk_bio_send_data(vbr); +} + /* return id (s/n) string for *disk to *id_str */ static int virtblk_get_id(struct gendisk *disk, char *id_str) @@ -360,7 +584,7 @@ static int init_vq(struct virtio_blk *vblk) int err = 0; /* We expect one virtqueue, for output. */ - vblk->vq = virtio_find_single_vq(vblk->vdev, blk_done, "requests"); + vblk->vq = virtio_find_single_vq(vblk->vdev, virtblk_done, "requests"); if (IS_ERR(vblk->vq)) err = PTR_ERR(vblk->vq); @@ -477,6 +701,8 @@ static int __devinit virtblk_probe(struct virtio_device *vdev) struct virtio_blk *vblk; struct request_queue *q; int err, index; + int pool_size; + u64 cap; u32 v, blk_size, sg_elems, opt_io_size; u16 min_io_size; @@ -506,10 +732,12 @@ static int __devinit virtblk_probe(struct virtio_device *vdev) goto out_free_index; } + init_waitqueue_head(&vblk->queue_wait); vblk->vdev = vdev; vblk->sg_elems = sg_elems; sg_init_table(vblk->sg, vblk->sg_elems); mutex_init(&vblk->config_lock); + INIT_WORK(&vblk->config_work, virtblk_config_changed_work); vblk->config_enable = true; @@ -517,7 +745,10 @@ static int __devinit virtblk_probe(struct virtio_device *vdev) if (err) goto out_free_vblk; - vblk->pool = mempool_create_kmalloc_pool(1,sizeof(struct virtblk_req)); + pool_size = sizeof(struct virtblk_req); + if (use_bio) + pool_size += sizeof(struct scatterlist) * sg_elems; + vblk->pool = mempool_create_kmalloc_pool(1, pool_size); if (!vblk->pool) { err = -ENOMEM; goto out_free_vq; @@ -530,12 +761,14 @@ static int __devinit virtblk_probe(struct virtio_device *vdev) goto out_mempool; } - q = vblk->disk->queue = blk_init_queue(do_virtblk_request, NULL); + q = vblk->disk->queue = blk_init_queue(virtblk_request, NULL); if (!q) { err = -ENOMEM; goto out_put_disk; } + if (use_bio) + blk_queue_make_request(q, virtblk_make_request); q->queuedata = vblk; virtblk_name_format("vd", index, vblk->disk->disk_name, DISK_NAME_LEN); @@ -620,7 +853,6 @@ static int __devinit virtblk_probe(struct virtio_device *vdev) if (!err && opt_io_size) blk_queue_io_opt(q, blk_size * opt_io_size); - add_disk(vblk->disk); err = device_create_file(disk_to_dev(vblk->disk), &dev_attr_serial); if (err) diff --git a/drivers/char/ds1620.c b/drivers/char/ds1620.c index aab9605..24ffd8c 100644 --- a/drivers/char/ds1620.c +++ b/drivers/char/ds1620.c @@ -74,21 +74,21 @@ static inline void netwinder_ds1620_reset(void) static inline void netwinder_lock(unsigned long *flags) { - spin_lock_irqsave(&nw_gpio_lock, *flags); + raw_spin_lock_irqsave(&nw_gpio_lock, *flags); } static inline void netwinder_unlock(unsigned long *flags) { - spin_unlock_irqrestore(&nw_gpio_lock, *flags); + raw_spin_unlock_irqrestore(&nw_gpio_lock, *flags); } static inline void netwinder_set_fan(int i) { unsigned long flags; - spin_lock_irqsave(&nw_gpio_lock, flags); + raw_spin_lock_irqsave(&nw_gpio_lock, flags); nw_gpio_modify_op(GPIO_FAN, i ? GPIO_FAN : 0); - spin_unlock_irqrestore(&nw_gpio_lock, flags); + raw_spin_unlock_irqrestore(&nw_gpio_lock, flags); } static inline int netwinder_get_fan(void) diff --git a/drivers/char/nwflash.c b/drivers/char/nwflash.c index a0e2f7d..e371480 100644 --- a/drivers/char/nwflash.c +++ b/drivers/char/nwflash.c @@ -583,9 +583,9 @@ static void kick_open(void) * we want to write a bit pattern XXX1 to Xilinx to enable * the write gate, which will be open for about the next 2ms. */ - spin_lock_irqsave(&nw_gpio_lock, flags); + raw_spin_lock_irqsave(&nw_gpio_lock, flags); nw_cpld_modify(CPLD_FLASH_WR_ENABLE, CPLD_FLASH_WR_ENABLE); - spin_unlock_irqrestore(&nw_gpio_lock, flags); + raw_spin_unlock_irqrestore(&nw_gpio_lock, flags); /* * let the ISA bus to catch on... diff --git a/drivers/char/virtio_console.c b/drivers/char/virtio_console.c index 060a672..8ab9c3d 100644 --- a/drivers/char/virtio_console.c +++ b/drivers/char/virtio_console.c @@ -24,6 +24,8 @@ #include <linux/err.h> #include <linux/freezer.h> #include <linux/fs.h> +#include <linux/splice.h> +#include <linux/pagemap.h> #include <linux/init.h> #include <linux/list.h> #include <linux/poll.h> @@ -474,26 +476,53 @@ static ssize_t send_control_msg(struct port *port, unsigned int event, return 0; } +struct buffer_token { + union { + void *buf; + struct scatterlist *sg; + } u; + /* If sgpages == 0 then buf is used, else sg is used */ + unsigned int sgpages; +}; + +static void reclaim_sg_pages(struct scatterlist *sg, unsigned int nrpages) +{ + int i; + struct page *page; + + for (i = 0; i < nrpages; i++) { + page = sg_page(&sg[i]); + if (!page) + break; + put_page(page); + } + kfree(sg); +} + /* Callers must take the port->outvq_lock */ static void reclaim_consumed_buffers(struct port *port) { - void *buf; + struct buffer_token *tok; unsigned int len; if (!port->portdev) { /* Device has been unplugged. vqs are already gone. */ return; } - while ((buf = virtqueue_get_buf(port->out_vq, &len))) { - kfree(buf); + while ((tok = virtqueue_get_buf(port->out_vq, &len))) { + if (tok->sgpages) + reclaim_sg_pages(tok->u.sg, tok->sgpages); + else + kfree(tok->u.buf); + kfree(tok); port->outvq_full = false; } } -static ssize_t send_buf(struct port *port, void *in_buf, size_t in_count, - bool nonblock) +static ssize_t __send_to_port(struct port *port, struct scatterlist *sg, + int nents, size_t in_count, + struct buffer_token *tok, bool nonblock) { - struct scatterlist sg[1]; struct virtqueue *out_vq; ssize_t ret; unsigned long flags; @@ -505,8 +534,7 @@ static ssize_t send_buf(struct port *port, void *in_buf, size_t in_count, reclaim_consumed_buffers(port); - sg_init_one(sg, in_buf, in_count); - ret = virtqueue_add_buf(out_vq, sg, 1, 0, in_buf, GFP_ATOMIC); + ret = virtqueue_add_buf(out_vq, sg, nents, 0, tok, GFP_ATOMIC); /* Tell Host to go! */ virtqueue_kick(out_vq); @@ -544,6 +572,37 @@ done: return in_count; } +static ssize_t send_buf(struct port *port, void *in_buf, size_t in_count, + bool nonblock) +{ + struct scatterlist sg[1]; + struct buffer_token *tok; + + tok = kmalloc(sizeof(*tok), GFP_ATOMIC); + if (!tok) + return -ENOMEM; + tok->sgpages = 0; + tok->u.buf = in_buf; + + sg_init_one(sg, in_buf, in_count); + + return __send_to_port(port, sg, 1, in_count, tok, nonblock); +} + +static ssize_t send_pages(struct port *port, struct scatterlist *sg, int nents, + size_t in_count, bool nonblock) +{ + struct buffer_token *tok; + + tok = kmalloc(sizeof(*tok), GFP_ATOMIC); + if (!tok) + return -ENOMEM; + tok->sgpages = nents; + tok->u.sg = sg; + + return __send_to_port(port, sg, nents, in_count, tok, nonblock); +} + /* * Give out the data that's requested from the buffer that we have * queued up. @@ -665,6 +724,26 @@ static ssize_t port_fops_read(struct file *filp, char __user *ubuf, return fill_readbuf(port, ubuf, count, true); } +static int wait_port_writable(struct port *port, bool nonblock) +{ + int ret; + + if (will_write_block(port)) { + if (nonblock) + return -EAGAIN; + + ret = wait_event_freezable(port->waitqueue, + !will_write_block(port)); + if (ret < 0) + return ret; + } + /* Port got hot-unplugged. */ + if (!port->guest_connected) + return -ENODEV; + + return 0; +} + static ssize_t port_fops_write(struct file *filp, const char __user *ubuf, size_t count, loff_t *offp) { @@ -681,18 +760,9 @@ static ssize_t port_fops_write(struct file *filp, const char __user *ubuf, nonblock = filp->f_flags & O_NONBLOCK; - if (will_write_block(port)) { - if (nonblock) - return -EAGAIN; - - ret = wait_event_freezable(port->waitqueue, - !will_write_block(port)); - if (ret < 0) - return ret; - } - /* Port got hot-unplugged. */ - if (!port->guest_connected) - return -ENODEV; + ret = wait_port_writable(port, nonblock); + if (ret < 0) + return ret; count = min((size_t)(32 * 1024), count); @@ -725,6 +795,93 @@ out: return ret; } +struct sg_list { + unsigned int n; + unsigned int size; + size_t len; + struct scatterlist *sg; +}; + +static int pipe_to_sg(struct pipe_inode_info *pipe, struct pipe_buffer *buf, + struct splice_desc *sd) +{ + struct sg_list *sgl = sd->u.data; + unsigned int offset, len; + + if (sgl->n == sgl->size) + return 0; + + /* Try lock this page */ + if (buf->ops->steal(pipe, buf) == 0) { + /* Get reference and unlock page for moving */ + get_page(buf->page); + unlock_page(buf->page); + + len = min(buf->len, sd->len); + sg_set_page(&(sgl->sg[sgl->n]), buf->page, len, buf->offset); + } else { + /* Failback to copying a page */ + struct page *page = alloc_page(GFP_KERNEL); + char *src = buf->ops->map(pipe, buf, 1); + char *dst; + + if (!page) + return -ENOMEM; + dst = kmap(page); + + offset = sd->pos & ~PAGE_MASK; + + len = sd->len; + if (len + offset > PAGE_SIZE) + len = PAGE_SIZE - offset; + + memcpy(dst + offset, src + buf->offset, len); + + kunmap(page); + buf->ops->unmap(pipe, buf, src); + + sg_set_page(&(sgl->sg[sgl->n]), page, len, offset); + } + sgl->n++; + sgl->len += len; + + return len; +} + +/* Faster zero-copy write by splicing */ +static ssize_t port_fops_splice_write(struct pipe_inode_info *pipe, + struct file *filp, loff_t *ppos, + size_t len, unsigned int flags) +{ + struct port *port = filp->private_data; + struct sg_list sgl; + ssize_t ret; + struct splice_desc sd = { + .total_len = len, + .flags = flags, + .pos = *ppos, + .u.data = &sgl, + }; + + ret = wait_port_writable(port, filp->f_flags & O_NONBLOCK); + if (ret < 0) + return ret; + + sgl.n = 0; + sgl.len = 0; + sgl.size = pipe->nrbufs; + sgl.sg = kmalloc(sizeof(struct scatterlist) * sgl.size, GFP_KERNEL); + if (unlikely(!sgl.sg)) + return -ENOMEM; + + sg_init_table(sgl.sg, sgl.size); + ret = __splice_from_pipe(pipe, &sd, pipe_to_sg); + if (likely(ret > 0)) + ret = send_pages(port, sgl.sg, sgl.n, sgl.len, true); + + return ret; +} + static unsigned int port_fops_poll(struct file *filp, poll_table *wait) { struct port *port; @@ -856,6 +1013,7 @@ static const struct file_operations port_fops = { .open = port_fops_open, .read = port_fops_read, .write = port_fops_write, + .splice_write = port_fops_splice_write, .poll = port_fops_poll, .release = port_fops_release, .fasync = port_fops_fasync, diff --git a/drivers/cpufreq/omap-cpufreq.c b/drivers/cpufreq/omap-cpufreq.c index 65f8e9a..1f3417a 100644 --- a/drivers/cpufreq/omap-cpufreq.c +++ b/drivers/cpufreq/omap-cpufreq.c @@ -30,20 +30,12 @@ #include <asm/smp_plat.h> #include <asm/cpu.h> -#include <plat/clock.h> -#include <plat/omap-pm.h> -#include <plat/common.h> -#include <plat/omap_device.h> - -#include <mach/hardware.h> - /* OPP tolerance in percentage */ #define OPP_TOLERANCE 4 static struct cpufreq_frequency_table *freq_table; static atomic_t freq_table_users = ATOMIC_INIT(0); static struct clk *mpu_clk; -static char *mpu_clk_name; static struct device *mpu_dev; static struct regulator *mpu_reg; @@ -108,6 +100,14 @@ static int omap_target(struct cpufreq_policy *policy, } freq = freqs.new * 1000; + ret = clk_round_rate(mpu_clk, freq); + if (IS_ERR_VALUE(ret)) { + dev_warn(mpu_dev, + "CPUfreq: Cannot find matching frequency for %lu\n", + freq); + return ret; + } + freq = ret; if (mpu_reg) { opp = opp_find_freq_ceil(mpu_dev, &freq); @@ -172,7 +172,7 @@ static int __cpuinit omap_cpu_init(struct cpufreq_policy *policy) { int result = 0; - mpu_clk = clk_get(NULL, mpu_clk_name); + mpu_clk = clk_get(NULL, "cpufreq_ck"); if (IS_ERR(mpu_clk)) return PTR_ERR(mpu_clk); @@ -253,22 +253,10 @@ static struct cpufreq_driver omap_driver = { static int __init omap_cpufreq_init(void) { - if (cpu_is_omap24xx()) - mpu_clk_name = "virt_prcm_set"; - else if (cpu_is_omap34xx()) - mpu_clk_name = "dpll1_ck"; - else if (cpu_is_omap44xx()) - mpu_clk_name = "dpll_mpu_ck"; - - if (!mpu_clk_name) { - pr_err("%s: unsupported Silicon?\n", __func__); - return -EINVAL; - } - - mpu_dev = omap_device_get_by_hwmod_name("mpu"); - if (IS_ERR(mpu_dev)) { + mpu_dev = get_cpu_device(0); + if (!mpu_dev) { pr_warning("%s: unable to get the mpu device\n", __func__); - return PTR_ERR(mpu_dev); + return -EINVAL; } mpu_reg = regulator_get(mpu_dev, "vcc"); diff --git a/drivers/lguest/lguest_device.c b/drivers/lguest/lguest_device.c index 9e8388e..fc92ccb 100644 --- a/drivers/lguest/lguest_device.c +++ b/drivers/lguest/lguest_device.c @@ -263,6 +263,9 @@ static struct virtqueue *lg_find_vq(struct virtio_device *vdev, struct virtqueue *vq; int err; + if (!name) + return NULL; + /* We must have this many virtqueues. */ if (index >= ldev->desc->num_vq) return ERR_PTR(-ENOENT); @@ -296,7 +299,7 @@ static struct virtqueue *lg_find_vq(struct virtio_device *vdev, * to 'true': the host just a(nother) SMP CPU, so we only need inter-cpu * barriers. */ - vq = vring_new_virtqueue(lvq->config.num, LGUEST_VRING_ALIGN, vdev, + vq = vring_new_virtqueue(index, lvq->config.num, LGUEST_VRING_ALIGN, vdev, true, lvq->pages, lg_notify, callback, name); if (!vq) { err = -ENOMEM; diff --git a/drivers/mmc/host/sdhci-tegra.c b/drivers/mmc/host/sdhci-tegra.c index d43e746..aa8c4de 100644 --- a/drivers/mmc/host/sdhci-tegra.c +++ b/drivers/mmc/host/sdhci-tegra.c @@ -27,7 +27,6 @@ #include <asm/gpio.h> -#include <mach/gpio-tegra.h> #include <linux/platform_data/mmc-sdhci-tegra.h> #include "sdhci-pltfm.h" diff --git a/drivers/power/avs/smartreflex.c b/drivers/power/avs/smartreflex.c index d4957b4..24768a2 100644 --- a/drivers/power/avs/smartreflex.c +++ b/drivers/power/avs/smartreflex.c @@ -930,7 +930,7 @@ static int __init omap_sr_probe(struct platform_device *pdev) if (!sr_info->base) { dev_err(&pdev->dev, "%s: ioremap fail\n", __func__); ret = -ENOMEM; - goto err_release_region; + goto err_free_name; } if (irq) @@ -969,7 +969,7 @@ static int __init omap_sr_probe(struct platform_device *pdev) dev_err(&pdev->dev, "%s: Unable to create debugfs directory\n", __func__); ret = PTR_ERR(sr_info->dbg_dir); - goto err_free_name; + goto err_debugfs; } (void) debugfs_create_file("autocomp", S_IRUGO | S_IWUSR, @@ -1013,11 +1013,11 @@ static int __init omap_sr_probe(struct platform_device *pdev) err_debugfs: debugfs_remove_recursive(sr_info->dbg_dir); -err_free_name: - kfree(sr_info->name); err_iounmap: list_del(&sr_info->node); iounmap(sr_info->base); +err_free_name: + kfree(sr_info->name); err_release_region: release_mem_region(mem->start, resource_size(mem)); err_free_devinfo: diff --git a/drivers/remoteproc/remoteproc_virtio.c b/drivers/remoteproc/remoteproc_virtio.c index 3541b44..e7a4780 100644 --- a/drivers/remoteproc/remoteproc_virtio.c +++ b/drivers/remoteproc/remoteproc_virtio.c @@ -84,6 +84,9 @@ static struct virtqueue *rp_find_vq(struct virtio_device *vdev, if (id >= ARRAY_SIZE(rvdev->vring)) return ERR_PTR(-EINVAL); + if (!name) + return NULL; + ret = rproc_alloc_vring(rvdev, id); if (ret) return ERR_PTR(ret); @@ -103,7 +106,7 @@ static struct virtqueue *rp_find_vq(struct virtio_device *vdev, * Create the new vq, and tell virtio we're not interested in * the 'weak' smp barriers, since we're talking with a real device. */ - vq = vring_new_virtqueue(len, rvring->align, vdev, false, addr, + vq = vring_new_virtqueue(id, len, rvring->align, vdev, false, addr, rproc_virtio_notify, callback, name); if (!vq) { dev_err(dev, "vring_new_virtqueue %s failed\n", name); diff --git a/drivers/rpmsg/Kconfig b/drivers/rpmsg/Kconfig index 32aead6..2bd911f 100644 --- a/drivers/rpmsg/Kconfig +++ b/drivers/rpmsg/Kconfig @@ -4,7 +4,6 @@ menu "Rpmsg drivers (EXPERIMENTAL)" config RPMSG tristate select VIRTIO - select VIRTIO_RING depends on EXPERIMENTAL endmenu diff --git a/drivers/s390/kvm/kvm_virtio.c b/drivers/s390/kvm/kvm_virtio.c index 47cccd5..7dabef6 100644 --- a/drivers/s390/kvm/kvm_virtio.c +++ b/drivers/s390/kvm/kvm_virtio.c @@ -190,6 +190,9 @@ static struct virtqueue *kvm_find_vq(struct virtio_device *vdev, if (index >= kdev->desc->num_vq) return ERR_PTR(-ENOENT); + if (!name) + return NULL; + config = kvm_vq_config(kdev->desc)+index; err = vmem_add_mapping(config->address, @@ -198,7 +201,7 @@ static struct virtqueue *kvm_find_vq(struct virtio_device *vdev, if (err) goto out; - vq = vring_new_virtqueue(config->num, KVM_S390_VIRTIO_RING_ALIGN, + vq = vring_new_virtqueue(index, config->num, KVM_S390_VIRTIO_RING_ALIGN, vdev, true, (void *) config->address, kvm_notify, callback, name); if (!vq) { diff --git a/drivers/virtio/Kconfig b/drivers/virtio/Kconfig index f38b17a..8d5bddb 100644 --- a/drivers/virtio/Kconfig +++ b/drivers/virtio/Kconfig @@ -1,11 +1,9 @@ -# Virtio always gets selected by whoever wants it. config VIRTIO tristate - -# Similarly the virtio ring implementation. -config VIRTIO_RING - tristate - depends on VIRTIO + ---help--- + This option is selected by any driver which implements the virtio + bus, such as CONFIG_VIRTIO_PCI, CONFIG_VIRTIO_MMIO, CONFIG_LGUEST, + CONFIG_RPMSG or CONFIG_S390_GUEST. menu "Virtio drivers" @@ -13,7 +11,6 @@ config VIRTIO_PCI tristate "PCI driver for virtio devices (EXPERIMENTAL)" depends on PCI && EXPERIMENTAL select VIRTIO - select VIRTIO_RING ---help--- This drivers provides support for virtio based paravirtual device drivers over PCI. This requires that your VMM has appropriate PCI @@ -26,9 +23,8 @@ config VIRTIO_PCI If unsure, say M. config VIRTIO_BALLOON - tristate "Virtio balloon driver (EXPERIMENTAL)" - select VIRTIO - select VIRTIO_RING + tristate "Virtio balloon driver" + depends on VIRTIO ---help--- This driver supports increasing and decreasing the amount of memory within a KVM guest. @@ -39,7 +35,6 @@ config VIRTIO_BALLOON tristate "Platform bus driver for memory mapped virtio devices (EXPERIMENTAL)" depends on HAS_IOMEM && EXPERIMENTAL select VIRTIO - select VIRTIO_RING ---help--- This drivers provides support for memory mapped virtio platform device driver. diff --git a/drivers/virtio/Makefile b/drivers/virtio/Makefile index 5a4c63c..9076635 100644 --- a/drivers/virtio/Makefile +++ b/drivers/virtio/Makefile @@ -1,5 +1,4 @@ -obj-$(CONFIG_VIRTIO) += virtio.o -obj-$(CONFIG_VIRTIO_RING) += virtio_ring.o +obj-$(CONFIG_VIRTIO) += virtio.o virtio_ring.o obj-$(CONFIG_VIRTIO_MMIO) += virtio_mmio.o obj-$(CONFIG_VIRTIO_PCI) += virtio_pci.o obj-$(CONFIG_VIRTIO_BALLOON) += virtio_balloon.o diff --git a/drivers/virtio/virtio.c b/drivers/virtio/virtio.c index c3b3f7f..1e8659c 100644 --- a/drivers/virtio/virtio.c +++ b/drivers/virtio/virtio.c @@ -159,7 +159,7 @@ static int virtio_dev_remove(struct device *_d) drv->remove(dev); /* Driver should have reset device. */ - BUG_ON(dev->config->get_status(dev)); + WARN_ON_ONCE(dev->config->get_status(dev)); /* Acknowledge the device's existence again. */ add_status(dev, VIRTIO_CONFIG_S_ACKNOWLEDGE); diff --git a/drivers/virtio/virtio_mmio.c b/drivers/virtio/virtio_mmio.c index 453db0c..6b1b7e1 100644 --- a/drivers/virtio/virtio_mmio.c +++ b/drivers/virtio/virtio_mmio.c @@ -131,9 +131,6 @@ struct virtio_mmio_vq_info { /* the number of entries in the queue */ unsigned int num; - /* the index of the queue */ - int queue_index; - /* the virtual address of the ring queue */ void *queue; @@ -225,11 +222,10 @@ static void vm_reset(struct virtio_device *vdev) static void vm_notify(struct virtqueue *vq) { struct virtio_mmio_device *vm_dev = to_virtio_mmio_device(vq->vdev); - struct virtio_mmio_vq_info *info = vq->priv; /* We write the queue's selector into the notification register to * signal the other end */ - writel(info->queue_index, vm_dev->base + VIRTIO_MMIO_QUEUE_NOTIFY); + writel(virtqueue_get_queue_index(vq), vm_dev->base + VIRTIO_MMIO_QUEUE_NOTIFY); } /* Notify all virtqueues on an interrupt. */ @@ -270,6 +266,7 @@ static void vm_del_vq(struct virtqueue *vq) struct virtio_mmio_device *vm_dev = to_virtio_mmio_device(vq->vdev); struct virtio_mmio_vq_info *info = vq->priv; unsigned long flags, size; + unsigned int index = virtqueue_get_queue_index(vq); spin_lock_irqsave(&vm_dev->lock, flags); list_del(&info->node); @@ -278,7 +275,7 @@ static void vm_del_vq(struct virtqueue *vq) vring_del_virtqueue(vq); /* Select and deactivate the queue */ - writel(info->queue_index, vm_dev->base + VIRTIO_MMIO_QUEUE_SEL); + writel(index, vm_dev->base + VIRTIO_MMIO_QUEUE_SEL); writel(0, vm_dev->base + VIRTIO_MMIO_QUEUE_PFN); size = PAGE_ALIGN(vring_size(info->num, VIRTIO_MMIO_VRING_ALIGN)); @@ -309,6 +306,9 @@ static struct virtqueue *vm_setup_vq(struct virtio_device *vdev, unsigned index, unsigned long flags, size; int err; + if (!name) + return NULL; + /* Select the queue we're interested in */ writel(index, vm_dev->base + VIRTIO_MMIO_QUEUE_SEL); @@ -324,7 +324,6 @@ static struct virtqueue *vm_setup_vq(struct virtio_device *vdev, unsigned index, err = -ENOMEM; goto error_kmalloc; } - info->queue_index = index; /* Allocate pages for the queue - start with a queue as big as * possible (limited by maximum size allowed by device), drop down @@ -332,11 +331,21 @@ static struct virtqueue *vm_setup_vq(struct virtio_device *vdev, unsigned index, * and two rings (which makes it "alignment_size * 2") */ info->num = readl(vm_dev->base + VIRTIO_MMIO_QUEUE_NUM_MAX); + + /* If the device reports a 0 entry queue, we won't be able to + * use it to perform I/O, and vring_new_virtqueue() can't create + * empty queues anyway, so don't bother to set up the device. + */ + if (info->num == 0) { + err = -ENOENT; + goto error_alloc_pages; + } + while (1) { size = PAGE_ALIGN(vring_size(info->num, VIRTIO_MMIO_VRING_ALIGN)); - /* Already smallest possible allocation? */ - if (size <= VIRTIO_MMIO_VRING_ALIGN * 2) { + /* Did the last iter shrink the queue below minimum size? */ + if (size < VIRTIO_MMIO_VRING_ALIGN * 2) { err = -ENOMEM; goto error_alloc_pages; } @@ -356,7 +365,7 @@ static struct virtqueue *vm_setup_vq(struct virtio_device *vdev, unsigned index, vm_dev->base + VIRTIO_MMIO_QUEUE_PFN); /* Create the vring */ - vq = vring_new_virtqueue(info->num, VIRTIO_MMIO_VRING_ALIGN, vdev, + vq = vring_new_virtqueue(index, info->num, VIRTIO_MMIO_VRING_ALIGN, vdev, true, info->queue, vm_notify, callback, name); if (!vq) { err = -ENOMEM; diff --git a/drivers/virtio/virtio_pci.c b/drivers/virtio/virtio_pci.c index 2e03d41..c33aea3 100644 --- a/drivers/virtio/virtio_pci.c +++ b/drivers/virtio/virtio_pci.c @@ -48,6 +48,7 @@ struct virtio_pci_device int msix_enabled; int intx_enabled; struct msix_entry *msix_entries; + cpumask_var_t *msix_affinity_masks; /* Name strings for interrupts. This size should be enough, * and I'm too lazy to allocate each name separately. */ char (*msix_names)[256]; @@ -79,9 +80,6 @@ struct virtio_pci_vq_info /* the number of entries in the queue */ int num; - /* the index of the queue */ - int queue_index; - /* the virtual address of the ring queue */ void *queue; @@ -202,11 +200,11 @@ static void vp_reset(struct virtio_device *vdev) static void vp_notify(struct virtqueue *vq) { struct virtio_pci_device *vp_dev = to_vp_device(vq->vdev); - struct virtio_pci_vq_info *info = vq->priv; /* we write the queue's selector into the notification register to * signal the other end */ - iowrite16(info->queue_index, vp_dev->ioaddr + VIRTIO_PCI_QUEUE_NOTIFY); + iowrite16(virtqueue_get_queue_index(vq), + vp_dev->ioaddr + VIRTIO_PCI_QUEUE_NOTIFY); } /* Handle a configuration change: Tell driver if it wants to know. */ @@ -279,6 +277,10 @@ static void vp_free_vectors(struct virtio_device *vdev) for (i = 0; i < vp_dev->msix_used_vectors; ++i) free_irq(vp_dev->msix_entries[i].vector, vp_dev); + for (i = 0; i < vp_dev->msix_vectors; i++) + if (vp_dev->msix_affinity_masks[i]) + free_cpumask_var(vp_dev->msix_affinity_masks[i]); + if (vp_dev->msix_enabled) { /* Disable the vector used for configuration */ iowrite16(VIRTIO_MSI_NO_VECTOR, @@ -296,6 +298,8 @@ static void vp_free_vectors(struct virtio_device *vdev) vp_dev->msix_names = NULL; kfree(vp_dev->msix_entries); vp_dev->msix_entries = NULL; + kfree(vp_dev->msix_affinity_masks); + vp_dev->msix_affinity_masks = NULL; } static int vp_request_msix_vectors(struct virtio_device *vdev, int nvectors, @@ -314,6 +318,15 @@ static int vp_request_msix_vectors(struct virtio_device *vdev, int nvectors, GFP_KERNEL); if (!vp_dev->msix_names) goto error; + vp_dev->msix_affinity_masks + = kzalloc(nvectors * sizeof *vp_dev->msix_affinity_masks, + GFP_KERNEL); + if (!vp_dev->msix_affinity_masks) + goto error; + for (i = 0; i < nvectors; ++i) + if (!alloc_cpumask_var(&vp_dev->msix_affinity_masks[i], + GFP_KERNEL)) + goto error; for (i = 0; i < nvectors; ++i) vp_dev->msix_entries[i].entry = i; @@ -402,7 +415,6 @@ static struct virtqueue *setup_vq(struct virtio_device *vdev, unsigned index, if (!info) return ERR_PTR(-ENOMEM); - info->queue_index = index; info->num = num; info->msix_vector = msix_vec; @@ -418,7 +430,7 @@ static struct virtqueue *setup_vq(struct virtio_device *vdev, unsigned index, vp_dev->ioaddr + VIRTIO_PCI_QUEUE_PFN); /* create the vring */ - vq = vring_new_virtqueue(info->num, VIRTIO_PCI_VRING_ALIGN, vdev, + vq = vring_new_virtqueue(index, info->num, VIRTIO_PCI_VRING_ALIGN, vdev, true, info->queue, vp_notify, callback, name); if (!vq) { err = -ENOMEM; @@ -467,7 +479,8 @@ static void vp_del_vq(struct virtqueue *vq) list_del(&info->node); spin_unlock_irqrestore(&vp_dev->lock, flags); - iowrite16(info->queue_index, vp_dev->ioaddr + VIRTIO_PCI_QUEUE_SEL); + iowrite16(virtqueue_get_queue_index(vq), + vp_dev->ioaddr + VIRTIO_PCI_QUEUE_SEL); if (vp_dev->msix_enabled) { iowrite16(VIRTIO_MSI_NO_VECTOR, @@ -542,7 +555,10 @@ static int vp_try_to_find_vqs(struct virtio_device *vdev, unsigned nvqs, vp_dev->per_vq_vectors = per_vq_vectors; allocated_vectors = vp_dev->msix_used_vectors; for (i = 0; i < nvqs; ++i) { - if (!callbacks[i] || !vp_dev->msix_enabled) + if (!names[i]) { + vqs[i] = NULL; + continue; + } else if (!callbacks[i] || !vp_dev->msix_enabled) msix_vec = VIRTIO_MSI_NO_VECTOR; else if (vp_dev->per_vq_vectors) msix_vec = allocated_vectors++; @@ -609,6 +625,35 @@ static const char *vp_bus_name(struct virtio_device *vdev) return pci_name(vp_dev->pci_dev); } +/* Setup the affinity for a virtqueue: + * - force the affinity for per vq vector + * - OR over all affinities for shared MSI + * - ignore the affinity request if we're using INTX + */ +static int vp_set_vq_affinity(struct virtqueue *vq, int cpu) +{ + struct virtio_device *vdev = vq->vdev; + struct virtio_pci_device *vp_dev = to_vp_device(vdev); + struct virtio_pci_vq_info *info = vq->priv; + struct cpumask *mask; + unsigned int irq; + + if (!vq->callback) + return -EINVAL; + + if (vp_dev->msix_enabled) { + mask = vp_dev->msix_affinity_masks[info->msix_vector]; + irq = vp_dev->msix_entries[info->msix_vector].vector; + if (cpu == -1) + irq_set_affinity_hint(irq, NULL); + else { + cpumask_set_cpu(cpu, mask); + irq_set_affinity_hint(irq, mask); + } + } + return 0; +} + static struct virtio_config_ops virtio_pci_config_ops = { .get = vp_get, .set = vp_set, @@ -620,6 +665,7 @@ static struct virtio_config_ops virtio_pci_config_ops = { .get_features = vp_get_features, .finalize_features = vp_finalize_features, .bus_name = vp_bus_name, + .set_vq_affinity = vp_set_vq_affinity, }; static void virtio_pci_release_dev(struct device *_d) @@ -673,8 +719,10 @@ static int __devinit virtio_pci_probe(struct pci_dev *pci_dev, goto out_enable_device; vp_dev->ioaddr = pci_iomap(pci_dev, 0, 0); - if (vp_dev->ioaddr == NULL) + if (vp_dev->ioaddr == NULL) { + err = -ENOMEM; goto out_req_regions; + } pci_set_drvdata(pci_dev, vp_dev); pci_set_master(pci_dev); diff --git a/drivers/virtio/virtio_ring.c b/drivers/virtio/virtio_ring.c index 5aa43c3..e639584 100644 --- a/drivers/virtio/virtio_ring.c +++ b/drivers/virtio/virtio_ring.c @@ -106,6 +106,9 @@ struct vring_virtqueue /* How to notify other side. FIXME: commonalize hcalls! */ void (*notify)(struct virtqueue *vq); + /* Index of the queue */ + int queue_index; + #ifdef DEBUG /* They're supposed to lock for us. */ unsigned int in_use; @@ -171,6 +174,13 @@ static int vring_add_indirect(struct vring_virtqueue *vq, return head; } +int virtqueue_get_queue_index(struct virtqueue *_vq) +{ + struct vring_virtqueue *vq = to_vvq(_vq); + return vq->queue_index; +} +EXPORT_SYMBOL_GPL(virtqueue_get_queue_index); + /** * virtqueue_add_buf - expose buffer to other end * @vq: the struct virtqueue we're talking about. @@ -616,7 +626,8 @@ irqreturn_t vring_interrupt(int irq, void *_vq) } EXPORT_SYMBOL_GPL(vring_interrupt); -struct virtqueue *vring_new_virtqueue(unsigned int num, +struct virtqueue *vring_new_virtqueue(unsigned int index, + unsigned int num, unsigned int vring_align, struct virtio_device *vdev, bool weak_barriers, @@ -647,6 +658,7 @@ struct virtqueue *vring_new_virtqueue(unsigned int num, vq->broken = false; vq->last_used_idx = 0; vq->num_added = 0; + vq->queue_index = index; list_add_tail(&vq->vq.list, &vdev->vqs); #ifdef DEBUG vq->in_use = false; diff --git a/drivers/watchdog/m54xx_wdt.c b/drivers/watchdog/m54xx_wdt.c index 663cad8..173494a 100644 --- a/drivers/watchdog/m54xx_wdt.c +++ b/drivers/watchdog/m54xx_wdt.c @@ -46,17 +46,17 @@ static void wdt_enable(void) unsigned int gms0; /* preserve GPIO usage, if any */ - gms0 = __raw_readl(MCF_MBAR + MCF_GPT_GMS0); + gms0 = __raw_readl(MCF_GPT_GMS0); if (gms0 & MCF_GPT_GMS_TMS_GPIO) gms0 &= (MCF_GPT_GMS_TMS_GPIO | MCF_GPT_GMS_GPIO_MASK | MCF_GPT_GMS_OD); else gms0 = MCF_GPT_GMS_TMS_GPIO | MCF_GPT_GMS_OD; - __raw_writel(gms0, MCF_MBAR + MCF_GPT_GMS0); + __raw_writel(gms0, MCF_GPT_GMS0); __raw_writel(MCF_GPT_GCIR_PRE(heartbeat*(MCF_BUSCLK/0xffff)) | - MCF_GPT_GCIR_CNT(0xffff), MCF_MBAR + MCF_GPT_GCIR0); + MCF_GPT_GCIR_CNT(0xffff), MCF_GPT_GCIR0); gms0 |= MCF_GPT_GMS_OCPW(0xA5) | MCF_GPT_GMS_WDEN | MCF_GPT_GMS_CE; - __raw_writel(gms0, MCF_MBAR + MCF_GPT_GMS0); + __raw_writel(gms0, MCF_GPT_GMS0); } static void wdt_disable(void) @@ -64,18 +64,18 @@ static void wdt_disable(void) unsigned int gms0; /* disable watchdog */ - gms0 = __raw_readl(MCF_MBAR + MCF_GPT_GMS0); + gms0 = __raw_readl(MCF_GPT_GMS0); gms0 &= ~(MCF_GPT_GMS_WDEN | MCF_GPT_GMS_CE); - __raw_writel(gms0, MCF_MBAR + MCF_GPT_GMS0); + __raw_writel(gms0, MCF_GPT_GMS0); } static void wdt_keepalive(void) { unsigned int gms0; - gms0 = __raw_readl(MCF_MBAR + MCF_GPT_GMS0); + gms0 = __raw_readl(MCF_GPT_GMS0); gms0 |= MCF_GPT_GMS_OCPW(0xA5); - __raw_writel(gms0, MCF_MBAR + MCF_GPT_GMS0); + __raw_writel(gms0, MCF_GPT_GMS0); } static int m54xx_wdt_open(struct inode *inode, struct file *file) @@ -195,8 +195,7 @@ static struct miscdevice m54xx_wdt_miscdev = { static int __init m54xx_wdt_init(void) { - if (!request_mem_region(MCF_MBAR + MCF_GPT_GCIR0, 4, - "Coldfire M54xx Watchdog")) { + if (!request_mem_region(MCF_GPT_GCIR0, 4, "Coldfire M54xx Watchdog")) { pr_warn("I/O region busy\n"); return -EBUSY; } @@ -208,7 +207,7 @@ static int __init m54xx_wdt_init(void) static void __exit m54xx_wdt_exit(void) { misc_deregister(&m54xx_wdt_miscdev); - release_mem_region(MCF_MBAR + MCF_GPT_GCIR0, 4); + release_mem_region(MCF_GPT_GCIR0, 4); } module_init(m54xx_wdt_init); diff --git a/include/linux/virtio.h b/include/linux/virtio.h index a1ba8bb..533b115 100644 --- a/include/linux/virtio.h +++ b/include/linux/virtio.h @@ -50,6 +50,8 @@ void *virtqueue_detach_unused_buf(struct virtqueue *vq); unsigned int virtqueue_get_vring_size(struct virtqueue *vq); +int virtqueue_get_queue_index(struct virtqueue *vq); + /** * virtio_device - representation of a device using virtio * @index: unique position on the virtio bus diff --git a/include/linux/virtio_config.h b/include/linux/virtio_config.h index fc457f4..e2850a7 100644 --- a/include/linux/virtio_config.h +++ b/include/linux/virtio_config.h @@ -84,7 +84,9 @@ * nvqs: the number of virtqueues to find * vqs: on success, includes new virtqueues * callbacks: array of callbacks, for each virtqueue + * include a NULL entry for vqs that do not need a callback * names: array of virtqueue names (mainly for debugging) + * include a NULL entry for vqs unused by driver * Returns 0 on success or error status * @del_vqs: free virtqueues found by find_vqs(). * @get_features: get the array of feature bits for this device. @@ -98,6 +100,7 @@ * vdev: the virtio_device * This returns a pointer to the bus name a la pci_name from which * the caller can then copy. + * @set_vq_affinity: set the affinity for a virtqueue. */ typedef void vq_callback_t(struct virtqueue *); struct virtio_config_ops { @@ -116,6 +119,7 @@ struct virtio_config_ops { u32 (*get_features)(struct virtio_device *vdev); void (*finalize_features)(struct virtio_device *vdev); const char *(*bus_name)(struct virtio_device *vdev); + int (*set_vq_affinity)(struct virtqueue *vq, int cpu); }; /* If driver didn't advertise the feature, it will never appear. */ @@ -190,5 +194,24 @@ const char *virtio_bus_name(struct virtio_device *vdev) return vdev->config->bus_name(vdev); } +/** + * virtqueue_set_affinity - setting affinity for a virtqueue + * @vq: the virtqueue + * @cpu: the cpu no. + * + * Pay attention the function are best-effort: the affinity hint may not be set + * due to config support, irq type and sharing. + * + */ +static inline +int virtqueue_set_affinity(struct virtqueue *vq, int cpu) +{ + struct virtio_device *vdev = vq->vdev; + if (vdev->config->set_vq_affinity) + return vdev->config->set_vq_affinity(vq, cpu); + return 0; +} + + #endif /* __KERNEL__ */ #endif /* _LINUX_VIRTIO_CONFIG_H */ diff --git a/include/linux/virtio_ring.h b/include/linux/virtio_ring.h index e338730..c2d793a 100644 --- a/include/linux/virtio_ring.h +++ b/include/linux/virtio_ring.h @@ -165,7 +165,8 @@ static inline int vring_need_event(__u16 event_idx, __u16 new_idx, __u16 old) struct virtio_device; struct virtqueue; -struct virtqueue *vring_new_virtqueue(unsigned int num, +struct virtqueue *vring_new_virtqueue(unsigned int index, + unsigned int num, unsigned int vring_align, struct virtio_device *vdev, bool weak_barriers, diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index cdcb594..31e4f55 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -4200,12 +4200,6 @@ static void buffer_pipe_buf_release(struct pipe_inode_info *pipe, buf->private = 0; } -static int buffer_pipe_buf_steal(struct pipe_inode_info *pipe, - struct pipe_buffer *buf) -{ - return 1; -} - static void buffer_pipe_buf_get(struct pipe_inode_info *pipe, struct pipe_buffer *buf) { @@ -4221,7 +4215,7 @@ static const struct pipe_buf_operations buffer_pipe_buf_ops = { .unmap = generic_pipe_buf_unmap, .confirm = generic_pipe_buf_confirm, .release = buffer_pipe_buf_release, - .steal = buffer_pipe_buf_steal, + .steal = generic_pipe_buf_steal, .get = buffer_pipe_buf_get, }; diff --git a/security/integrity/ima/ima.h b/security/integrity/ima/ima.h index 8180add..6ee8826 100644 --- a/security/integrity/ima/ima.h +++ b/security/integrity/ima/ima.h @@ -143,7 +143,7 @@ void ima_delete_rules(void); #ifdef CONFIG_IMA_APPRAISE int ima_appraise_measurement(struct integrity_iint_cache *iint, struct file *file, const unsigned char *filename); -int ima_must_appraise(struct inode *inode, enum ima_hooks func, int mask); +int ima_must_appraise(struct inode *inode, int mask, enum ima_hooks func); void ima_update_xattr(struct integrity_iint_cache *iint, struct file *file); #else @@ -154,8 +154,8 @@ static inline int ima_appraise_measurement(struct integrity_iint_cache *iint, return INTEGRITY_UNKNOWN; } -static inline int ima_must_appraise(struct inode *inode, - enum ima_hooks func, int mask) +static inline int ima_must_appraise(struct inode *inode, int mask, + enum ima_hooks func) { return 0; } diff --git a/security/integrity/ima/ima_appraise.c b/security/integrity/ima/ima_appraise.c index 0aa43bd..bdc8ba1 100644 --- a/security/integrity/ima/ima_appraise.c +++ b/security/integrity/ima/ima_appraise.c @@ -34,7 +34,7 @@ __setup("ima_appraise=", default_appraise_setup); * * Return 1 to appraise */ -int ima_must_appraise(struct inode *inode, enum ima_hooks func, int mask) +int ima_must_appraise(struct inode *inode, int mask, enum ima_hooks func) { if (!ima_appraise) return 0; diff --git a/sound/oss/waveartist.c b/sound/oss/waveartist.c index 24c430f..672af8b 100644 --- a/sound/oss/waveartist.c +++ b/sound/oss/waveartist.c @@ -1482,9 +1482,9 @@ vnc_mute_spkr(wavnc_info *devc) { unsigned long flags; - spin_lock_irqsave(&nw_gpio_lock, flags); + raw_spin_lock_irqsave(&nw_gpio_lock, flags); nw_cpld_modify(CPLD_UNMUTE, devc->spkr_mute_state ? 0 : CPLD_UNMUTE); - spin_unlock_irqrestore(&nw_gpio_lock, flags); + raw_spin_unlock_irqrestore(&nw_gpio_lock, flags); } static void diff --git a/tools/lguest/lguest.c b/tools/lguest/lguest.c index f759f4f..fd2f922 100644 --- a/tools/lguest/lguest.c +++ b/tools/lguest/lguest.c @@ -1299,6 +1299,7 @@ static struct device *new_device(const char *name, u16 type) dev->feature_len = 0; dev->num_vq = 0; dev->running = false; + dev->next = NULL; /* * Append to device list. Prepending to a single-linked list is diff --git a/tools/virtio/virtio-trace/Makefile b/tools/virtio/virtio-trace/Makefile new file mode 100644 index 0000000..0d23816 --- /dev/null +++ b/tools/virtio/virtio-trace/Makefile @@ -0,0 +1,13 @@ +CC = gcc +CFLAGS = -O2 -Wall -pthread + +all: trace-agent + +.c.o: + $(CC) $(CFLAGS) -c $^ -o $@ + +trace-agent: trace-agent.o trace-agent-ctl.o trace-agent-rw.o + $(CC) $(CFLAGS) -o $@ $^ + +clean: + rm -f *.o trace-agent diff --git a/tools/virtio/virtio-trace/README b/tools/virtio/virtio-trace/README new file mode 100644 index 0000000..b64845b --- /dev/null +++ b/tools/virtio/virtio-trace/README @@ -0,0 +1,118 @@ +Trace Agent for virtio-trace +============================ + +Trace agent is a user tool for sending trace data of a guest to a Host in low +overhead. Trace agent has the following functions: + - splice a page of ring-buffer to read_pipe without memory copying + - splice the page from write_pipe to virtio-console without memory copying + - write trace data to stdout by using -o option + - controlled by start/stop orders from a Host + +The trace agent operates as follows: + 1) Initialize all structures. + 2) Create a read/write thread per CPU. Each thread is bound to a CPU. + The read/write threads hold it. + 3) A controller thread does poll() for a start order of a host. + 4) After the controller of the trace agent receives a start order from a host, + the controller wake read/write threads. + 5) The read/write threads start to read trace data from ring-buffers and + write the data to virtio-serial. + 6) If the controller receives a stop order from a host, the read/write threads + stop to read trace data. + + +Files +===== + +README: this file +Makefile: Makefile of trace agent for virtio-trace +trace-agent.c: includes main function, sets up for operating trace agent +trace-agent.h: includes all structures and some macros +trace-agent-ctl.c: includes controller function for read/write threads +trace-agent-rw.c: includes read/write threads function + + +Setup +===== + +To use this trace agent for virtio-trace, we need to prepare some virtio-serial +I/Fs. + +1) Make FIFO in a host + virtio-trace uses virtio-serial pipe as trace data paths as to the number +of CPUs and a control path, so FIFO (named pipe) should be created as follows: + # mkdir /tmp/virtio-trace/ + # mkfifo /tmp/virtio-trace/trace-path-cpu{0,1,2,...,X}.{in,out} + # mkfifo /tmp/virtio-trace/agent-ctl-path.{in,out} + +For example, if a guest use three CPUs, the names are + trace-path-cpu{0,1,2}.{in.out} +and + agent-ctl-path.{in,out}. + +2) Set up of virtio-serial pipe in a host + Add qemu option to use virtio-serial pipe. + + ##virtio-serial device## + -device virtio-serial-pci,id=virtio-serial0\ + ##control path## + -chardev pipe,id=charchannel0,path=/tmp/virtio-trace/agent-ctl-path\ + -device virtserialport,bus=virtio-serial0.0,nr=1,chardev=charchannel0,\ + id=channel0,name=agent-ctl-path\ + ##data path## + -chardev pipe,id=charchannel1,path=/tmp/virtio-trace/trace-path-cpu0\ + -device virtserialport,bus=virtio-serial0.0,nr=2,chardev=charchannel0,\ + id=channel1,name=trace-path-cpu0\ + ... + +If you manage guests with libvirt, add the following tags to domain XML files. +Then, libvirt passes the same command option to qemu. + + <channel type='pipe'> + <source path='/tmp/virtio-trace/agent-ctl-path'/> + <target type='virtio' name='agent-ctl-path'/> + <address type='virtio-serial' controller='0' bus='0' port='0'/> + </channel> + <channel type='pipe'> + <source path='/tmp/virtio-trace/trace-path-cpu0'/> + <target type='virtio' name='trace-path-cpu0'/> + <address type='virtio-serial' controller='0' bus='0' port='1'/> + </channel> + ... +Here, chardev names are restricted to trace-path-cpuX and agent-ctl-path. For +example, if a guest use three CPUs, chardev names should be trace-path-cpu0, +trace-path-cpu1, trace-path-cpu2, and agent-ctl-path. + +3) Boot the guest + You can find some chardev in /dev/virtio-ports/ in the guest. + + +Run +=== + +0) Build trace agent in a guest + $ make + +1) Enable ftrace in the guest + <Example> + # echo 1 > /sys/kernel/debug/tracing/events/sched/enable + +2) Run trace agent in the guest + This agent must be operated as root. + # ./trace-agent +read/write threads in the agent wait for start order from host. If you add -o +option, trace data are output via stdout in the guest. + +3) Open FIFO in a host + # cat /tmp/virtio-trace/trace-path-cpu0.out +If a host does not open these, trace data get stuck in buffers of virtio. Then, +the guest will stop by specification of chardev in QEMU. This blocking mode may +be solved in the future. + +4) Start to read trace data by ordering from a host + A host injects read start order to the guest via virtio-serial. + # echo 1 > /tmp/virtio-trace/agent-ctl-path.in + +5) Stop to read trace data by ordering from a host + A host injects read stop order to the guest via virtio-serial. + # echo 0 > /tmp/virtio-trace/agent-ctl-path.in diff --git a/tools/virtio/virtio-trace/trace-agent-ctl.c b/tools/virtio/virtio-trace/trace-agent-ctl.c new file mode 100644 index 0000000..a2d0403 --- /dev/null +++ b/tools/virtio/virtio-trace/trace-agent-ctl.c @@ -0,0 +1,137 @@ +/* + * Controller of read/write threads for virtio-trace + * + * Copyright (C) 2012 Hitachi, Ltd. + * Created by Yoshihiro Yunomae <yoshihiro.yunomae.ez@hitachi.com> + * Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> + * + * Licensed under GPL version 2 only. + * + */ + +#define _GNU_SOURCE +#include <fcntl.h> +#include <poll.h> +#include <signal.h> +#include <stdio.h> +#include <stdlib.h> +#include <unistd.h> +#include "trace-agent.h" + +#define HOST_MSG_SIZE 256 +#define EVENT_WAIT_MSEC 100 + +static volatile sig_atomic_t global_signal_val; +bool global_sig_receive; /* default false */ +bool global_run_operation; /* default false*/ + +/* Handle SIGTERM/SIGINT/SIGQUIT to exit */ +static void signal_handler(int sig) +{ + global_signal_val = sig; +} + +int rw_ctl_init(const char *ctl_path) +{ + int ctl_fd; + + ctl_fd = open(ctl_path, O_RDONLY); + if (ctl_fd == -1) { + pr_err("Cannot open ctl_fd\n"); + goto error; + } + + return ctl_fd; + +error: + exit(EXIT_FAILURE); +} + +static int wait_order(int ctl_fd) +{ + struct pollfd poll_fd; + int ret = 0; + + while (!global_sig_receive) { + poll_fd.fd = ctl_fd; + poll_fd.events = POLLIN; + + ret = poll(&poll_fd, 1, EVENT_WAIT_MSEC); + + if (global_signal_val) { + global_sig_receive = true; + pr_info("Receive interrupt %d\n", global_signal_val); + + /* Wakes rw-threads when they are sleeping */ + if (!global_run_operation) + pthread_cond_broadcast(&cond_wakeup); + + ret = -1; + break; + } + + if (ret < 0) { + pr_err("Polling error\n"); + goto error; + } + + if (ret) + break; + }; + + return ret; + +error: + exit(EXIT_FAILURE); +} + +/* + * contol read/write threads by handling global_run_operation + */ +void *rw_ctl_loop(int ctl_fd) +{ + ssize_t rlen; + char buf[HOST_MSG_SIZE]; + int ret; + + /* Setup signal handlers */ + signal(SIGTERM, signal_handler); + signal(SIGINT, signal_handler); + signal(SIGQUIT, signal_handler); + + while (!global_sig_receive) { + + ret = wait_order(ctl_fd); + if (ret < 0) + break; + + rlen = read(ctl_fd, buf, sizeof(buf)); + if (rlen < 0) { + pr_err("read data error in ctl thread\n"); + goto error; + } + + if (rlen == 2 && buf[0] == '1') { + /* + * If host writes '1' to a control path, + * this controller wakes all read/write threads. + */ + global_run_operation = true; + pthread_cond_broadcast(&cond_wakeup); + pr_debug("Wake up all read/write threads\n"); + } else if (rlen == 2 && buf[0] == '0') { + /* + * If host writes '0' to a control path, read/write + * threads will wait for notification from Host. + */ + global_run_operation = false; + pr_debug("Stop all read/write threads\n"); + } else + pr_info("Invalid host notification: %s\n", buf); + } + + return NULL; + +error: + exit(EXIT_FAILURE); +} diff --git a/tools/virtio/virtio-trace/trace-agent-rw.c b/tools/virtio/virtio-trace/trace-agent-rw.c new file mode 100644 index 0000000..3aace5e --- /dev/null +++ b/tools/virtio/virtio-trace/trace-agent-rw.c @@ -0,0 +1,192 @@ +/* + * Read/write thread of a guest agent for virtio-trace + * + * Copyright (C) 2012 Hitachi, Ltd. + * Created by Yoshihiro Yunomae <yoshihiro.yunomae.ez@hitachi.com> + * Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> + * + * Licensed under GPL version 2 only. + * + */ + +#define _GNU_SOURCE +#include <fcntl.h> +#include <stdio.h> +#include <stdlib.h> +#include <unistd.h> +#include <sys/syscall.h> +#include "trace-agent.h" + +#define READ_WAIT_USEC 100000 + +void *rw_thread_info_new(void) +{ + struct rw_thread_info *rw_ti; + + rw_ti = zalloc(sizeof(struct rw_thread_info)); + if (rw_ti == NULL) { + pr_err("rw_thread_info zalloc error\n"); + exit(EXIT_FAILURE); + } + + rw_ti->cpu_num = -1; + rw_ti->in_fd = -1; + rw_ti->out_fd = -1; + rw_ti->read_pipe = -1; + rw_ti->write_pipe = -1; + rw_ti->pipe_size = PIPE_INIT; + + return rw_ti; +} + +void *rw_thread_init(int cpu, const char *in_path, const char *out_path, + bool stdout_flag, unsigned long pipe_size, + struct rw_thread_info *rw_ti) +{ + int data_pipe[2]; + + rw_ti->cpu_num = cpu; + + /* set read(input) fd */ + rw_ti->in_fd = open(in_path, O_RDONLY); + if (rw_ti->in_fd == -1) { + pr_err("Could not open in_fd (CPU:%d)\n", cpu); + goto error; + } + + /* set write(output) fd */ + if (!stdout_flag) { + /* virtio-serial output mode */ + rw_ti->out_fd = open(out_path, O_WRONLY); + if (rw_ti->out_fd == -1) { + pr_err("Could not open out_fd (CPU:%d)\n", cpu); + goto error; + } + } else + /* stdout mode */ + rw_ti->out_fd = STDOUT_FILENO; + + if (pipe2(data_pipe, O_NONBLOCK) < 0) { + pr_err("Could not create pipe in rw-thread(%d)\n", cpu); + goto error; + } + + /* + * Size of pipe is 64kB in default based on fs/pipe.c. + * To read/write trace data speedy, pipe size is changed. + */ + if (fcntl(*data_pipe, F_SETPIPE_SZ, pipe_size) < 0) { + pr_err("Could not change pipe size in rw-thread(%d)\n", cpu); + goto error; + } + + rw_ti->read_pipe = data_pipe[1]; + rw_ti->write_pipe = data_pipe[0]; + rw_ti->pipe_size = pipe_size; + + return NULL; + +error: + exit(EXIT_FAILURE); +} + +/* Bind a thread to a cpu */ +static void bind_cpu(int cpu_num) +{ + cpu_set_t mask; + + CPU_ZERO(&mask); + CPU_SET(cpu_num, &mask); + + /* bind my thread to cpu_num by assigning zero to the first argument */ + if (sched_setaffinity(0, sizeof(mask), &mask) == -1) + pr_err("Could not set CPU#%d affinity\n", (int)cpu_num); +} + +static void *rw_thread_main(void *thread_info) +{ + ssize_t rlen, wlen; + ssize_t ret; + struct rw_thread_info *ts = (struct rw_thread_info *)thread_info; + + bind_cpu(ts->cpu_num); + + while (1) { + /* Wait for a read order of trace data by Host OS */ + if (!global_run_operation) { + pthread_mutex_lock(&mutex_notify); + pthread_cond_wait(&cond_wakeup, &mutex_notify); + pthread_mutex_unlock(&mutex_notify); + } + + if (global_sig_receive) + break; + + /* + * Each thread read trace_pipe_raw of each cpu bounding the + * thread, so contention of multi-threads does not occur. + */ + rlen = splice(ts->in_fd, NULL, ts->read_pipe, NULL, + ts->pipe_size, SPLICE_F_MOVE | SPLICE_F_MORE); + + if (rlen < 0) { + pr_err("Splice_read in rw-thread(%d)\n", ts->cpu_num); + goto error; + } else if (rlen == 0) { + /* + * If trace data do not exist or are unreadable not + * for exceeding the page size, splice_read returns + * NULL. Then, this waits for being filled the data in a + * ring-buffer. + */ + usleep(READ_WAIT_USEC); + pr_debug("Read retry(cpu:%d)\n", ts->cpu_num); + continue; + } + + wlen = 0; + + do { + ret = splice(ts->write_pipe, NULL, ts->out_fd, NULL, + rlen - wlen, + SPLICE_F_MOVE | SPLICE_F_MORE); + + if (ret < 0) { + pr_err("Splice_write in rw-thread(%d)\n", + ts->cpu_num); + goto error; + } else if (ret == 0) + /* + * When host reader is not in time for reading + * trace data, guest will be stopped. This is + * because char dev in QEMU is not supported + * non-blocking mode. Then, writer might be + * sleep in that case. + * This sleep will be removed by supporting + * non-blocking mode. + */ + sleep(1); + wlen += ret; + } while (wlen < rlen); + } + + return NULL; + +error: + exit(EXIT_FAILURE); +} + + +pthread_t rw_thread_run(struct rw_thread_info *rw_ti) +{ + int ret; + pthread_t rw_thread_per_cpu; + + ret = pthread_create(&rw_thread_per_cpu, NULL, rw_thread_main, rw_ti); + if (ret != 0) { + pr_err("Could not create a rw thread(%d)\n", rw_ti->cpu_num); + exit(EXIT_FAILURE); + } + + return rw_thread_per_cpu; +} diff --git a/tools/virtio/virtio-trace/trace-agent.c b/tools/virtio/virtio-trace/trace-agent.c new file mode 100644 index 0000000..0a0a7dd --- /dev/null +++ b/tools/virtio/virtio-trace/trace-agent.c @@ -0,0 +1,270 @@ +/* + * Guest agent for virtio-trace + * + * Copyright (C) 2012 Hitachi, Ltd. + * Created by Yoshihiro Yunomae <yoshihiro.yunomae.ez@hitachi.com> + * Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> + * + * Licensed under GPL version 2 only. + * + */ + +#define _GNU_SOURCE +#include <limits.h> +#include <stdio.h> +#include <stdlib.h> +#include <unistd.h> +#include "trace-agent.h" + +#define PAGE_SIZE (sysconf(_SC_PAGE_SIZE)) +#define PIPE_DEF_BUFS 16 +#define PIPE_MIN_SIZE (PAGE_SIZE*PIPE_DEF_BUFS) +#define PIPE_MAX_SIZE (1024*1024) +#define READ_PATH_FMT \ + "/sys/kernel/debug/tracing/per_cpu/cpu%d/trace_pipe_raw" +#define WRITE_PATH_FMT "/dev/virtio-ports/trace-path-cpu%d" +#define CTL_PATH "/dev/virtio-ports/agent-ctl-path" + +pthread_mutex_t mutex_notify = PTHREAD_MUTEX_INITIALIZER; +pthread_cond_t cond_wakeup = PTHREAD_COND_INITIALIZER; + +static int get_total_cpus(void) +{ + int nr_cpus = (int)sysconf(_SC_NPROCESSORS_CONF); + + if (nr_cpus <= 0) { + pr_err("Could not read cpus\n"); + goto error; + } else if (nr_cpus > MAX_CPUS) { + pr_err("Exceed max cpus(%d)\n", (int)MAX_CPUS); + goto error; + } + + return nr_cpus; + +error: + exit(EXIT_FAILURE); +} + +static void *agent_info_new(void) +{ + struct agent_info *s; + int i; + + s = zalloc(sizeof(struct agent_info)); + if (s == NULL) { + pr_err("agent_info zalloc error\n"); + exit(EXIT_FAILURE); + } + + s->pipe_size = PIPE_INIT; + s->use_stdout = false; + s->cpus = get_total_cpus(); + s->ctl_fd = -1; + + /* read/write threads init */ + for (i = 0; i < s->cpus; i++) + s->rw_ti[i] = rw_thread_info_new(); + + return s; +} + +static unsigned long parse_size(const char *arg) +{ + unsigned long value, round; + char *ptr; + + value = strtoul(arg, &ptr, 10); + switch (*ptr) { + case 'K': case 'k': + value <<= 10; + break; + case 'M': case 'm': + value <<= 20; + break; + default: + break; + } + + if (value > PIPE_MAX_SIZE) { + pr_err("Pipe size must be less than 1MB\n"); + goto error; + } else if (value < PIPE_MIN_SIZE) { + pr_err("Pipe size must be over 64KB\n"); + goto error; + } + + /* Align buffer size with page unit */ + round = value & (PAGE_SIZE - 1); + value = value - round; + + return value; +error: + return 0; +} + +static void usage(char const *prg) +{ + pr_err("usage: %s [-h] [-o] [-s <size of pipe>]\n", prg); +} + +static const char *make_path(int cpu_num, bool this_is_write_path) +{ + int ret; + char *buf; + + buf = zalloc(PATH_MAX); + if (buf == NULL) { + pr_err("Could not allocate buffer\n"); + goto error; + } + + if (this_is_write_path) + /* write(output) path */ + ret = snprintf(buf, PATH_MAX, WRITE_PATH_FMT, cpu_num); + else + /* read(input) path */ + ret = snprintf(buf, PATH_MAX, READ_PATH_FMT, cpu_num); + + if (ret <= 0) { + pr_err("Failed to generate %s path(CPU#%d):%d\n", + this_is_write_path ? "read" : "write", cpu_num, ret); + goto error; + } + + return buf; + +error: + free(buf); + return NULL; +} + +static const char *make_input_path(int cpu_num) +{ + return make_path(cpu_num, false); +} + +static const char *make_output_path(int cpu_num) +{ + return make_path(cpu_num, true); +} + +static void *agent_info_init(struct agent_info *s) +{ + int cpu; + const char *in_path = NULL; + const char *out_path = NULL; + + /* init read/write threads */ + for (cpu = 0; cpu < s->cpus; cpu++) { + /* set read(input) path per read/write thread */ + in_path = make_input_path(cpu); + if (in_path == NULL) + goto error; + + /* set write(output) path per read/write thread*/ + if (!s->use_stdout) { + out_path = make_output_path(cpu); + if (out_path == NULL) + goto error; + } else + /* stdout mode */ + pr_debug("stdout mode\n"); + + rw_thread_init(cpu, in_path, out_path, s->use_stdout, + s->pipe_size, s->rw_ti[cpu]); + } + + /* init controller of read/write threads */ + s->ctl_fd = rw_ctl_init((const char *)CTL_PATH); + + return NULL; + +error: + exit(EXIT_FAILURE); +} + +static void *parse_args(int argc, char *argv[], struct agent_info *s) +{ + int cmd; + unsigned long size; + + while ((cmd = getopt(argc, argv, "hos:")) != -1) { + switch (cmd) { + /* stdout mode */ + case 'o': + s->use_stdout = true; + break; + /* size of pipe */ + case 's': + size = parse_size(optarg); + if (size == 0) + goto error; + s->pipe_size = size; + break; + case 'h': + default: + usage(argv[0]); + goto error; + } + } + + agent_info_init(s); + + return NULL; + +error: + exit(EXIT_FAILURE); +} + +static void agent_main_loop(struct agent_info *s) +{ + int cpu; + pthread_t rw_thread_per_cpu[MAX_CPUS]; + + /* Start all read/write threads */ + for (cpu = 0; cpu < s->cpus; cpu++) + rw_thread_per_cpu[cpu] = rw_thread_run(s->rw_ti[cpu]); + + rw_ctl_loop(s->ctl_fd); + + /* Finish all read/write threads */ + for (cpu = 0; cpu < s->cpus; cpu++) { + int ret; + + ret = pthread_join(rw_thread_per_cpu[cpu], NULL); + if (ret != 0) { + pr_err("pthread_join() error:%d (cpu %d)\n", ret, cpu); + exit(EXIT_FAILURE); + } + } +} + +static void agent_info_free(struct agent_info *s) +{ + int i; + + close(s->ctl_fd); + for (i = 0; i < s->cpus; i++) { + close(s->rw_ti[i]->in_fd); + close(s->rw_ti[i]->out_fd); + close(s->rw_ti[i]->read_pipe); + close(s->rw_ti[i]->write_pipe); + free(s->rw_ti[i]); + } + free(s); +} + +int main(int argc, char *argv[]) +{ + struct agent_info *s = NULL; + + s = agent_info_new(); + parse_args(argc, argv, s); + + agent_main_loop(s); + + agent_info_free(s); + + return 0; +} diff --git a/tools/virtio/virtio-trace/trace-agent.h b/tools/virtio/virtio-trace/trace-agent.h new file mode 100644 index 0000000..8de79bf --- /dev/null +++ b/tools/virtio/virtio-trace/trace-agent.h @@ -0,0 +1,75 @@ +#ifndef __TRACE_AGENT_H__ +#define __TRACE_AGENT_H__ +#include <pthread.h> +#include <stdbool.h> + +#define MAX_CPUS 256 +#define PIPE_INIT (1024*1024) + +/* + * agent_info - structure managing total information of guest agent + * @pipe_size: size of pipe (default 1MB) + * @use_stdout: set to true when o option is added (default false) + * @cpus: total number of CPUs + * @ctl_fd: fd of control path, /dev/virtio-ports/agent-ctl-path + * @rw_ti: structure managing information of read/write threads + */ +struct agent_info { + unsigned long pipe_size; + bool use_stdout; + int cpus; + int ctl_fd; + struct rw_thread_info *rw_ti[MAX_CPUS]; +}; + +/* + * rw_thread_info - structure managing a read/write thread a cpu + * @cpu_num: cpu number operating this read/write thread + * @in_fd: fd of reading trace data path in cpu_num + * @out_fd: fd of writing trace data path in cpu_num + * @read_pipe: fd of read pipe + * @write_pipe: fd of write pipe + * @pipe_size: size of pipe (default 1MB) + */ +struct rw_thread_info { + int cpu_num; + int in_fd; + int out_fd; + int read_pipe; + int write_pipe; + unsigned long pipe_size; +}; + +/* use for stopping rw threads */ +extern bool global_sig_receive; + +/* use for notification */ +extern bool global_run_operation; +extern pthread_mutex_t mutex_notify; +extern pthread_cond_t cond_wakeup; + +/* for controller of read/write threads */ +extern int rw_ctl_init(const char *ctl_path); +extern void *rw_ctl_loop(int ctl_fd); + +/* for trace read/write thread */ +extern void *rw_thread_info_new(void); +extern void *rw_thread_init(int cpu, const char *in_path, const char *out_path, + bool stdout_flag, unsigned long pipe_size, + struct rw_thread_info *rw_ti); +extern pthread_t rw_thread_run(struct rw_thread_info *rw_ti); + +static inline void *zalloc(size_t size) +{ + return calloc(1, size); +} + +#define pr_err(format, ...) fprintf(stderr, format, ## __VA_ARGS__) +#define pr_info(format, ...) fprintf(stdout, format, ## __VA_ARGS__) +#ifdef DEBUG +#define pr_debug(format, ...) fprintf(stderr, format, ## __VA_ARGS__) +#else +#define pr_debug(format, ...) do {} while (0) +#endif + +#endif /*__TRACE_AGENT_H__*/ |