summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--drivers/char/nozomi.c2
-rw-r--r--drivers/char/tty_io.c2
-rw-r--r--drivers/serial/8250_pnp.c10
-rw-r--r--drivers/serial/imx.c2
-rw-r--r--drivers/serial/serial_core.c105
-rw-r--r--drivers/serial/serial_cs.c3
-rw-r--r--fs/compat_ioctl.c3
7 files changed, 54 insertions, 73 deletions
diff --git a/drivers/char/nozomi.c b/drivers/char/nozomi.c
index 7d73cd4..2ad7d37 100644
--- a/drivers/char/nozomi.c
+++ b/drivers/char/nozomi.c
@@ -1651,10 +1651,10 @@ static void ntty_close(struct tty_struct *tty, struct file *file)
dc->open_ttys--;
port->count--;
- tty_port_tty_set(port, NULL);
if (port->count == 0) {
DBG1("close: %d", nport->token_dl);
+ tty_port_tty_set(port, NULL);
spin_lock_irqsave(&dc->spin_mutex, flags);
dc->last_ier &= ~(nport->token_dl);
writew(dc->last_ier, dc->reg_ier);
diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c
index f15df40..c6f3b48 100644
--- a/drivers/char/tty_io.c
+++ b/drivers/char/tty_io.c
@@ -1951,8 +1951,8 @@ static int tty_fasync(int fd, struct file *filp, int on)
pid = task_pid(current);
type = PIDTYPE_PID;
}
- spin_unlock_irqrestore(&tty->ctrl_lock, flags);
retval = __f_setown(filp, pid, type, 0);
+ spin_unlock_irqrestore(&tty->ctrl_lock, flags);
if (retval)
goto out;
} else {
diff --git a/drivers/serial/8250_pnp.c b/drivers/serial/8250_pnp.c
index b5496a1..24485cc 100644
--- a/drivers/serial/8250_pnp.c
+++ b/drivers/serial/8250_pnp.c
@@ -328,15 +328,7 @@ static const struct pnp_device_id pnp_dev_table[] = {
/* U.S. Robotics 56K Voice INT PnP*/
{ "USR9190", 0 },
/* Wacom tablets */
- { "WACF004", 0 },
- { "WACF005", 0 },
- { "WACF006", 0 },
- { "WACF007", 0 },
- { "WACF008", 0 },
- { "WACF009", 0 },
- { "WACF00A", 0 },
- { "WACF00B", 0 },
- { "WACF00C", 0 },
+ { "WACFXXX", 0 },
/* Compaq touchscreen */
{ "FPI2002", 0 },
/* Fujitsu Stylistic touchscreens */
diff --git a/drivers/serial/imx.c b/drivers/serial/imx.c
index 18130f1..60d665a 100644
--- a/drivers/serial/imx.c
+++ b/drivers/serial/imx.c
@@ -1088,7 +1088,7 @@ imx_console_get_options(struct imx_port *sport, int *baud,
int *parity, int *bits)
{
- if ( readl(sport->port.membase + UCR1) | UCR1_UARTEN ) {
+ if (readl(sport->port.membase + UCR1) & UCR1_UARTEN) {
/* ok, the port was enabled */
unsigned int ucr2, ubir,ubmr, uartclk;
unsigned int baud_raw;
diff --git a/drivers/serial/serial_core.c b/drivers/serial/serial_core.c
index 047530b..7f28307 100644
--- a/drivers/serial/serial_core.c
+++ b/drivers/serial/serial_core.c
@@ -385,13 +385,20 @@ uart_get_baud_rate(struct uart_port *port, struct ktermios *termios,
}
/*
- * As a last resort, if the quotient is zero,
- * default to 9600 bps
+ * As a last resort, if the range cannot be met then clip to
+ * the nearest chip supported rate.
*/
- if (!hung_up)
- tty_termios_encode_baud_rate(termios, 9600, 9600);
+ if (!hung_up) {
+ if (baud <= min)
+ tty_termios_encode_baud_rate(termios,
+ min + 1, min + 1);
+ else
+ tty_termios_encode_baud_rate(termios,
+ max - 1, max - 1);
+ }
}
-
+ /* Should never happen */
+ WARN_ON(1);
return 0;
}
@@ -2006,12 +2013,6 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *uport)
mutex_lock(&port->mutex);
- if (!console_suspend_enabled && uart_console(uport)) {
- /* we're going to avoid suspending serial console */
- mutex_unlock(&port->mutex);
- return 0;
- }
-
tty_dev = device_find_child(uport->dev, &match, serial_match_port);
if (device_may_wakeup(tty_dev)) {
enable_irq_wake(uport->irq);
@@ -2019,20 +2020,23 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *uport)
mutex_unlock(&port->mutex);
return 0;
}
- uport->suspended = 1;
+ if (console_suspend_enabled || !uart_console(uport))
+ uport->suspended = 1;
if (port->flags & ASYNC_INITIALIZED) {
const struct uart_ops *ops = uport->ops;
int tries;
- set_bit(ASYNCB_SUSPENDED, &port->flags);
- clear_bit(ASYNCB_INITIALIZED, &port->flags);
+ if (console_suspend_enabled || !uart_console(uport)) {
+ set_bit(ASYNCB_SUSPENDED, &port->flags);
+ clear_bit(ASYNCB_INITIALIZED, &port->flags);
- spin_lock_irq(&uport->lock);
- ops->stop_tx(uport);
- ops->set_mctrl(uport, 0);
- ops->stop_rx(uport);
- spin_unlock_irq(&uport->lock);
+ spin_lock_irq(&uport->lock);
+ ops->stop_tx(uport);
+ ops->set_mctrl(uport, 0);
+ ops->stop_rx(uport);
+ spin_unlock_irq(&uport->lock);
+ }
/*
* Wait for the transmitter to empty.
@@ -2047,16 +2051,18 @@ int uart_suspend_port(struct uart_driver *drv, struct uart_port *uport)
drv->dev_name,
drv->tty_driver->name_base + uport->line);
- ops->shutdown(uport);
+ if (console_suspend_enabled || !uart_console(uport))
+ ops->shutdown(uport);
}
/*
* Disable the console device before suspending.
*/
- if (uart_console(uport))
+ if (console_suspend_enabled && uart_console(uport))
console_stop(uport->cons);
- uart_change_pm(state, 3);
+ if (console_suspend_enabled || !uart_console(uport))
+ uart_change_pm(state, 3);
mutex_unlock(&port->mutex);
@@ -2073,29 +2079,6 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *uport)
mutex_lock(&port->mutex);
- if (!console_suspend_enabled && uart_console(uport)) {
- /* no need to resume serial console, it wasn't suspended */
- /*
- * First try to use the console cflag setting.
- */
- memset(&termios, 0, sizeof(struct ktermios));
- termios.c_cflag = uport->cons->cflag;
- /*
- * If that's unset, use the tty termios setting.
- */
- if (termios.c_cflag == 0)
- termios = *state->port.tty->termios;
- else {
- termios.c_ispeed = termios.c_ospeed =
- tty_termios_input_baud_rate(&termios);
- termios.c_ispeed = termios.c_ospeed =
- tty_termios_baud_rate(&termios);
- }
- uport->ops->set_termios(uport, &termios, NULL);
- mutex_unlock(&port->mutex);
- return 0;
- }
-
tty_dev = device_find_child(uport->dev, &match, serial_match_port);
if (!uport->suspended && device_may_wakeup(tty_dev)) {
disable_irq_wake(uport->irq);
@@ -2121,21 +2104,23 @@ int uart_resume_port(struct uart_driver *drv, struct uart_port *uport)
spin_lock_irq(&uport->lock);
ops->set_mctrl(uport, 0);
spin_unlock_irq(&uport->lock);
- ret = ops->startup(uport);
- if (ret == 0) {
- uart_change_speed(state, NULL);
- spin_lock_irq(&uport->lock);
- ops->set_mctrl(uport, uport->mctrl);
- ops->start_tx(uport);
- spin_unlock_irq(&uport->lock);
- set_bit(ASYNCB_INITIALIZED, &port->flags);
- } else {
- /*
- * Failed to resume - maybe hardware went away?
- * Clear the "initialized" flag so we won't try
- * to call the low level drivers shutdown method.
- */
- uart_shutdown(state);
+ if (console_suspend_enabled || !uart_console(uport)) {
+ ret = ops->startup(uport);
+ if (ret == 0) {
+ uart_change_speed(state, NULL);
+ spin_lock_irq(&uport->lock);
+ ops->set_mctrl(uport, uport->mctrl);
+ ops->start_tx(uport);
+ spin_unlock_irq(&uport->lock);
+ set_bit(ASYNCB_INITIALIZED, &port->flags);
+ } else {
+ /*
+ * Failed to resume - maybe hardware went away?
+ * Clear the "initialized" flag so we won't try
+ * to call the low level drivers shutdown method.
+ */
+ uart_shutdown(state);
+ }
}
clear_bit(ASYNCB_SUSPENDED, &port->flags);
diff --git a/drivers/serial/serial_cs.c b/drivers/serial/serial_cs.c
index 0ee7239..df85440 100644
--- a/drivers/serial/serial_cs.c
+++ b/drivers/serial/serial_cs.c
@@ -146,7 +146,8 @@ static void quirk_wakeup_oxsemi(struct pcmcia_device *link)
{
struct serial_info *info = link->priv;
- outb(12, info->c950ctrl + 1);
+ if (info->c950ctrl)
+ outb(12, info->c950ctrl + 1);
}
/* request_region? oxsemi branch does no request_region too... */
diff --git a/fs/compat_ioctl.c b/fs/compat_ioctl.c
index 332dd00..c5c45de 100644
--- a/fs/compat_ioctl.c
+++ b/fs/compat_ioctl.c
@@ -1005,6 +1005,9 @@ COMPATIBLE_IOCTL(SCSI_IOCTL_SEND_COMMAND)
COMPATIBLE_IOCTL(SCSI_IOCTL_PROBE_HOST)
COMPATIBLE_IOCTL(SCSI_IOCTL_GET_PCI)
#endif
+/* Big V (don't complain on serial console) */
+IGNORE_IOCTL(VT_OPENQRY)
+IGNORE_IOCTL(VT_GETMODE)
/* Little p (/dev/rtc, /dev/envctrl, etc.) */
COMPATIBLE_IOCTL(RTC_AIE_ON)
COMPATIBLE_IOCTL(RTC_AIE_OFF)
generated by cgit v0.10.2 at 2024-11-12 01:39:39 (GMT)