diff options
| -rw-r--r-- | Documentation/ABI/testing/sysfs-bus-iio-frequency-ad9523 | 37 | ||||
| -rw-r--r-- | drivers/iio/Kconfig | 1 | ||||
| -rw-r--r-- | drivers/iio/Makefile | 1 | ||||
| -rw-r--r-- | drivers/iio/frequency/Kconfig | 23 | ||||
| -rw-r--r-- | drivers/iio/frequency/Makefile | 5 | ||||
| -rw-r--r-- | drivers/iio/frequency/ad9523.c | 1057 | ||||
| -rw-r--r-- | include/linux/iio/frequency/ad9523.h | 195 |
7 files changed, 1319 insertions, 0 deletions
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-frequency-ad9523 b/Documentation/ABI/testing/sysfs-bus-iio-frequency-ad9523 new file mode 100644 index 0000000..2ce9c3f --- /dev/null +++ b/Documentation/ABI/testing/sysfs-bus-iio-frequency-ad9523 @@ -0,0 +1,37 @@ +What: /sys/bus/iio/devices/iio:deviceX/pll2_feedback_clk_present +What: /sys/bus/iio/devices/iio:deviceX/pll2_reference_clk_present +What: /sys/bus/iio/devices/iio:deviceX/pll1_reference_clk_a_present +What: /sys/bus/iio/devices/iio:deviceX/pll1_reference_clk_b_present +What: /sys/bus/iio/devices/iio:deviceX/pll1_reference_clk_test_present +What: /sys/bus/iio/devices/iio:deviceX/vcxo_clk_present +KernelVersion: 3.4.0 +Contact: linux-iio@vger.kernel.org +Description: + Reading returns either '1' or '0'. + '1' means that the clock in question is present. + '0' means that the clock is missing. + +What: /sys/bus/iio/devices/iio:deviceX/pllY_locked +KernelVersion: 3.4.0 +Contact: linux-iio@vger.kernel.org +Description: + Reading returns either '1' or '0'. '1' means that the + pllY is locked. + +What: /sys/bus/iio/devices/iio:deviceX/store_eeprom +KernelVersion: 3.4.0 +Contact: linux-iio@vger.kernel.org +Description: + Writing '1' stores the current device configuration into + on-chip EEPROM. After power-up or chip reset the device will + automatically load the saved configuration. + +What: /sys/bus/iio/devices/iio:deviceX/sync_dividers +KernelVersion: 3.4.0 +Contact: linux-iio@vger.kernel.org +Description: + Writing '1' triggers the clock distribution synchronization + functionality. All dividers are reset and the channels start + with their predefined phase offsets (out_altvoltageY_phase). + Writing this file has the effect as driving the external + /SYNC pin low. diff --git a/drivers/iio/Kconfig b/drivers/iio/Kconfig index cacc74d..64c88e5 100644 --- a/drivers/iio/Kconfig +++ b/drivers/iio/Kconfig @@ -51,5 +51,6 @@ config IIO_CONSUMERS_PER_TRIGGER source "drivers/iio/adc/Kconfig" source "drivers/iio/amplifiers/Kconfig" source "drivers/iio/light/Kconfig" +source "drivers/iio/frequency/Kconfig" endif # IIO diff --git a/drivers/iio/Makefile b/drivers/iio/Makefile index 060b674..bd801c0 100644 --- a/drivers/iio/Makefile +++ b/drivers/iio/Makefile @@ -12,3 +12,4 @@ obj-$(CONFIG_IIO_KFIFO_BUF) += kfifo_buf.o obj-y += adc/ obj-y += amplifiers/ obj-y += light/ +obj-y += frequency/ diff --git a/drivers/iio/frequency/Kconfig b/drivers/iio/frequency/Kconfig new file mode 100644 index 0000000..0458c92 --- /dev/null +++ b/drivers/iio/frequency/Kconfig @@ -0,0 +1,23 @@ +# +# Frequency +# Direct Digital Synthesis drivers (DDS) +# Clock Distribution device drivers +# Phase-Locked Loop (PLL) frequency synthesizers +# + +menu "Frequency Synthesizers DDS/PLL" + +menu "Clock Generator/Distribution" + +config AD9523 + tristate "Analog Devices AD9523 Low Jitter Clock Generator" + depends on SPI + help + Say yes here to build support for Analog Devices AD9523 Low Jitter + Clock Generator. The driver provides direct access via sysfs. + + To compile this driver as a module, choose M here: the + module will be called ad9523. + +endmenu +endmenu diff --git a/drivers/iio/frequency/Makefile b/drivers/iio/frequency/Makefile new file mode 100644 index 0000000..1b5b224 --- /dev/null +++ b/drivers/iio/frequency/Makefile @@ -0,0 +1,5 @@ +# +# Makefile iio/frequency +# + +obj-$(CONFIG_AD9523) += ad9523.o diff --git a/drivers/iio/frequency/ad9523.c b/drivers/iio/frequency/ad9523.c new file mode 100644 index 0000000..7272924 --- /dev/null +++ b/drivers/iio/frequency/ad9523.c @@ -0,0 +1,1057 @@ +/* + * AD9523 SPI Low Jitter Clock Generator + * + * Copyright 2012 Analog Devices Inc. + * + * Licensed under the GPL-2. + */ + +#include <linux/device.h> +#include <linux/kernel.h> +#include <linux/slab.h> +#include <linux/sysfs.h> +#include <linux/spi/spi.h> +#include <linux/regulator/consumer.h> +#include <linux/err.h> +#include <linux/module.h> +#include <linux/delay.h> + +#include <linux/iio/iio.h> +#include <linux/iio/sysfs.h> +#include <linux/iio/frequency/ad9523.h> + +#define AD9523_READ (1 << 15) +#define AD9523_WRITE (0 << 15) +#define AD9523_CNT(x) (((x) - 1) << 13) +#define AD9523_ADDR(x) ((x) & 0xFFF) + +#define AD9523_R1B (1 << 16) +#define AD9523_R2B (2 << 16) +#define AD9523_R3B (3 << 16) +#define AD9523_TRANSF_LEN(x) ((x) >> 16) + +#define AD9523_SERIAL_PORT_CONFIG (AD9523_R1B | 0x0) +#define AD9523_VERSION_REGISTER (AD9523_R1B | 0x2) +#define AD9523_PART_REGISTER (AD9523_R1B | 0x3) +#define AD9523_READBACK_CTRL (AD9523_R1B | 0x4) + +#define AD9523_EEPROM_CUSTOMER_VERSION_ID (AD9523_R2B | 0x6) + +#define AD9523_PLL1_REF_A_DIVIDER (AD9523_R2B | 0x11) +#define AD9523_PLL1_REF_B_DIVIDER (AD9523_R2B | 0x13) +#define AD9523_PLL1_REF_TEST_DIVIDER (AD9523_R1B | 0x14) +#define AD9523_PLL1_FEEDBACK_DIVIDER (AD9523_R2B | 0x17) +#define AD9523_PLL1_CHARGE_PUMP_CTRL (AD9523_R2B | 0x19) +#define AD9523_PLL1_INPUT_RECEIVERS_CTRL (AD9523_R1B | 0x1A) +#define AD9523_PLL1_REF_CTRL (AD9523_R1B | 0x1B) +#define AD9523_PLL1_MISC_CTRL (AD9523_R1B | 0x1C) +#define AD9523_PLL1_LOOP_FILTER_CTRL (AD9523_R1B | 0x1D) + +#define AD9523_PLL2_CHARGE_PUMP (AD9523_R1B | 0xF0) +#define AD9523_PLL2_FEEDBACK_DIVIDER_AB (AD9523_R1B | 0xF1) +#define AD9523_PLL2_CTRL (AD9523_R1B | 0xF2) +#define AD9523_PLL2_VCO_CTRL (AD9523_R1B | 0xF3) +#define AD9523_PLL2_VCO_DIVIDER (AD9523_R1B | 0xF4) +#define AD9523_PLL2_LOOP_FILTER_CTRL (AD9523_R2B | 0xF6) +#define AD9523_PLL2_R2_DIVIDER (AD9523_R1B | 0xF7) + +#define AD9523_CHANNEL_CLOCK_DIST(ch) (AD9523_R3B | (0x192 + 3 * ch)) + +#define AD9523_PLL1_OUTPUT_CTRL (AD9523_R1B | 0x1BA) +#define AD9523_PLL1_OUTPUT_CHANNEL_CTRL (AD9523_R1B | 0x1BB) + +#define AD9523_READBACK_0 (AD9523_R1B | 0x22C) +#define AD9523_READBACK_1 (AD9523_R1B | 0x22D) + +#define AD9523_STATUS_SIGNALS (AD9523_R3B | 0x232) +#define AD9523_POWER_DOWN_CTRL (AD9523_R1B | 0x233) +#define AD9523_IO_UPDATE (AD9523_R1B | 0x234) + +#define AD9523_EEPROM_DATA_XFER_STATUS (AD9523_R1B | 0xB00) +#define AD9523_EEPROM_ERROR_READBACK (AD9523_R1B | 0xB01) +#define AD9523_EEPROM_CTRL1 (AD9523_R1B | 0xB02) +#define AD9523_EEPROM_CTRL2 (AD9523_R1B | 0xB03) + +/* AD9523_SERIAL_PORT_CONFIG */ + +#define AD9523_SER_CONF_SDO_ACTIVE (1 << 7) +#define AD9523_SER_CONF_SOFT_RESET (1 << 5) + +/* AD9523_READBACK_CTRL */ +#define AD9523_READBACK_CTRL_READ_BUFFERED (1 << 0) + +/* AD9523_PLL1_CHARGE_PUMP_CTRL */ +#define AD9523_PLL1_CHARGE_PUMP_CURRENT_nA(x) (((x) / 500) & 0x7F) +#define AD9523_PLL1_CHARGE_PUMP_TRISTATE (1 << 7) +#define AD9523_PLL1_CHARGE_PUMP_MODE_NORMAL (3 << 8) +#define AD9523_PLL1_CHARGE_PUMP_MODE_PUMP_DOWN (2 << 8) +#define AD9523_PLL1_CHARGE_PUMP_MODE_PUMP_UP (1 << 8) +#define AD9523_PLL1_CHARGE_PUMP_MODE_TRISTATE (0 << 8) +#define AD9523_PLL1_BACKLASH_PW_MIN (0 << 10) +#define AD9523_PLL1_BACKLASH_PW_LOW (1 << 10) +#define AD9523_PLL1_BACKLASH_PW_HIGH (2 << 10) +#define AD9523_PLL1_BACKLASH_PW_MAX (3 << 10) + +/* AD9523_PLL1_INPUT_RECEIVERS_CTRL */ +#define AD9523_PLL1_REF_TEST_RCV_EN (1 << 7) +#define AD9523_PLL1_REFB_DIFF_RCV_EN (1 << 6) +#define AD9523_PLL1_REFA_DIFF_RCV_EN (1 << 5) +#define AD9523_PLL1_REFB_RCV_EN (1 << 4) +#define AD9523_PLL1_REFA_RCV_EN (1 << 3) +#define AD9523_PLL1_REFA_REFB_PWR_CTRL_EN (1 << 2) +#define AD9523_PLL1_OSC_IN_CMOS_NEG_INP_EN (1 << 1) +#define AD9523_PLL1_OSC_IN_DIFF_EN (1 << 0) + +/* AD9523_PLL1_REF_CTRL */ +#define AD9523_PLL1_BYPASS_REF_TEST_DIV_EN (1 << 7) +#define AD9523_PLL1_BYPASS_FEEDBACK_DIV_EN (1 << 6) +#define AD9523_PLL1_ZERO_DELAY_MODE_INT (1 << 5) +#define AD9523_PLL1_ZERO_DELAY_MODE_EXT (0 << 5) +#define AD9523_PLL1_OSC_IN_PLL_FEEDBACK_EN (1 << 4) +#define AD9523_PLL1_ZD_IN_CMOS_NEG_INP_EN (1 << 3) +#define AD9523_PLL1_ZD_IN_DIFF_EN (1 << 2) +#define AD9523_PLL1_REFB_CMOS_NEG_INP_EN (1 << 1) +#define AD9523_PLL1_REFA_CMOS_NEG_INP_EN (1 << 0) + +/* AD9523_PLL1_MISC_CTRL */ +#define AD9523_PLL1_REFB_INDEP_DIV_CTRL_EN (1 << 7) +#define AD9523_PLL1_OSC_CTRL_FAIL_VCC_BY2_EN (1 << 6) +#define AD9523_PLL1_REF_MODE(x) ((x) << 2) +#define AD9523_PLL1_BYPASS_REFB_DIV (1 << 1) +#define AD9523_PLL1_BYPASS_REFA_DIV (1 << 0) + +/* AD9523_PLL1_LOOP_FILTER_CTRL */ +#define AD9523_PLL1_LOOP_FILTER_RZERO(x) ((x) & 0xF) + +/* AD9523_PLL2_CHARGE_PUMP */ +#define AD9523_PLL2_CHARGE_PUMP_CURRENT_nA(x) ((x) / 3500) + +/* AD9523_PLL2_FEEDBACK_DIVIDER_AB */ +#define AD9523_PLL2_FB_NDIV_A_CNT(x) (((x) & 0x3) << 6) +#define AD9523_PLL2_FB_NDIV_B_CNT(x) (((x) & 0x3F) << 0) +#define AD9523_PLL2_FB_NDIV(a, b) (4 * (b) + (a)) + +/* AD9523_PLL2_CTRL */ +#define AD9523_PLL2_CHARGE_PUMP_MODE_NORMAL (3 << 0) +#define AD9523_PLL2_CHARGE_PUMP_MODE_PUMP_DOWN (2 << 0) +#define AD9523_PLL2_CHARGE_PUMP_MODE_PUMP_UP (1 << 0) +#define AD9523_PLL2_CHARGE_PUMP_MODE_TRISTATE (0 << 0) +#define AD9523_PLL2_BACKLASH_PW_MIN (0 << 2) +#define AD9523_PLL2_BACKLASH_PW_LOW (1 << 2) +#define AD9523_PLL2_BACKLASH_PW_HIGH (2 << 2) +#define AD9523_PLL2_BACKLASH_PW_MAX (3 << 1) +#define AD9523_PLL2_BACKLASH_CTRL_EN (1 << 4) +#define AD9523_PLL2_FREQ_DOUBLER_EN (1 << 5) +#define AD9523_PLL2_LOCK_DETECT_PWR_DOWN_EN (1 << 7) + +/* AD9523_PLL2_VCO_CTRL */ +#define AD9523_PLL2_VCO_CALIBRATE (1 << 1) +#define AD9523_PLL2_FORCE_VCO_MIDSCALE (1 << 2) +#define AD9523_PLL2_FORCE_REFERENCE_VALID (1 << 3) +#define AD9523_PLL2_FORCE_RELEASE_SYNC (1 << 4) + +/* AD9523_PLL2_VCO_DIVIDER */ +#define AD9523_PLL2_VCO_DIV_M1(x) ((((x) - 3) & 0x3) << 0) +#define AD9523_PLL2_VCO_DIV_M2(x) ((((x) - 3) & 0x3) << 4) +#define AD9523_PLL2_VCO_DIV_M1_PWR_DOWN_EN (1 << 2) +#define AD9523_PLL2_VCO_DIV_M2_PWR_DOWN_EN (1 << 6) + +/* AD9523_PLL2_LOOP_FILTER_CTRL */ +#define AD9523_PLL2_LOOP_FILTER_CPOLE1(x) (((x) & 0x7) << 0) +#define AD9523_PLL2_LOOP_FILTER_RZERO(x) (((x) & 0x7) << 3) +#define AD9523_PLL2_LOOP_FILTER_RPOLE2(x) (((x) & 0x7) << 6) +#define AD9523_PLL2_LOOP_FILTER_RZERO_BYPASS_EN (1 << 8) + +/* AD9523_PLL2_R2_DIVIDER */ +#define AD9523_PLL2_R2_DIVIDER_VAL(x) (((x) & 0x1F) << 0) + +/* AD9523_CHANNEL_CLOCK_DIST */ +#define AD9523_CLK_DIST_DIV_PHASE(x) (((x) & 0x3F) << 18) +#define AD9523_CLK_DIST_DIV_PHASE_REV(x) ((ret >> 18) & 0x3F) +#define AD9523_CLK_DIST_DIV(x) ((((x) - 1) & 0x3FF) << 8) +#define AD9523_CLK_DIST_DIV_REV(x) (((ret >> 8) & 0x3FF) + 1) +#define AD9523_CLK_DIST_INV_DIV_OUTPUT_EN (1 << 7) +#define AD9523_CLK_DIST_IGNORE_SYNC_EN (1 << 6) +#define AD9523_CLK_DIST_PWR_DOWN_EN (1 << 5) +#define AD9523_CLK_DIST_LOW_PWR_MODE_EN (1 << 4) +#define AD9523_CLK_DIST_DRIVER_MODE(x) (((x) & 0xF) << 0) + +/* AD9523_PLL1_OUTPUT_CTRL */ +#define AD9523_PLL1_OUTP_CTRL_VCO_DIV_SEL_CH6_M2 (1 << 7) +#define AD9523_PLL1_OUTP_CTRL_VCO_DIV_SEL_CH5_M2 (1 << 6) +#define AD9523_PLL1_OUTP_CTRL_VCO_DIV_SEL_CH4_M2 (1 << 5) +#define AD9523_PLL1_OUTP_CTRL_CMOS_DRV_WEAK (1 << 4) +#define AD9523_PLL1_OUTP_CTRL_OUTPUT_DIV_1 (0 << 0) +#define AD9523_PLL1_OUTP_CTRL_OUTPUT_DIV_2 (1 << 0) +#define AD9523_PLL1_OUTP_CTRL_OUTPUT_DIV_4 (2 << 0) +#define AD9523_PLL1_OUTP_CTRL_OUTPUT_DIV_8 (4 << 0) +#define AD9523_PLL1_OUTP_CTRL_OUTPUT_DIV_16 (8 << 0) + +/* AD9523_PLL1_OUTPUT_CHANNEL_CTRL */ +#define AD9523_PLL1_OUTP_CH_CTRL_OUTPUT_PWR_DOWN_EN (1 << 7) +#define AD9523_PLL1_OUTP_CH_CTRL_VCO_DIV_SEL_CH9_M2 (1 << 6) +#define AD9523_PLL1_OUTP_CH_CTRL_VCO_DIV_SEL_CH8_M2 (1 << 5) +#define AD9523_PLL1_OUTP_CH_CTRL_VCO_DIV_SEL_CH7_M2 (1 << 4) +#define AD9523_PLL1_OUTP_CH_CTRL_VCXO_SRC_SEL_CH3 (1 << 3) +#define AD9523_PLL1_OUTP_CH_CTRL_VCXO_SRC_SEL_CH2 (1 << 2) +#define AD9523_PLL1_OUTP_CH_CTRL_VCXO_SRC_SEL_CH1 (1 << 1) +#define AD9523_PLL1_OUTP_CH_CTRL_VCXO_SRC_SEL_CH0 (1 << 0) + +/* AD9523_READBACK_0 */ +#define AD9523_READBACK_0_STAT_PLL2_REF_CLK (1 << 7) +#define AD9523_READBACK_0_STAT_PLL2_FB_CLK (1 << 6) +#define AD9523_READBACK_0_STAT_VCXO (1 << 5) +#define AD9523_READBACK_0_STAT_REF_TEST (1 << 4) +#define AD9523_READBACK_0_STAT_REFB (1 << 3) +#define AD9523_READBACK_0_STAT_REFA (1 << 2) +#define AD9523_READBACK_0_STAT_PLL2_LD (1 << 1) +#define AD9523_READBACK_0_STAT_PLL1_LD (1 << 0) + +/* AD9523_READBACK_1 */ +#define AD9523_READBACK_1_HOLDOVER_ACTIVE (1 << 3) +#define AD9523_READBACK_1_AUTOMODE_SEL_REFB (1 << 2) +#define AD9523_READBACK_1_VCO_CALIB_IN_PROGRESS (1 << 0) + +/* AD9523_STATUS_SIGNALS */ +#define AD9523_STATUS_SIGNALS_SYNC_MAN_CTRL (1 << 16) +#define AD9523_STATUS_MONITOR_01_PLL12_LOCKED (0x302) +/* AD9523_POWER_DOWN_CTRL */ +#define AD9523_POWER_DOWN_CTRL_PLL1_PWR_DOWN (1 << 2) +#define AD9523_POWER_DOWN_CTRL_PLL2_PWR_DOWN (1 << 1) +#define AD9523_POWER_DOWN_CTRL_DIST_PWR_DOWN (1 << 0) + +/* AD9523_IO_UPDATE */ +#define AD9523_IO_UPDATE_EN (1 << 0) + +/* AD9523_EEPROM_DATA_XFER_STATUS */ +#define AD9523_EEPROM_DATA_XFER_IN_PROGRESS (1 << 0) + +/* AD9523_EEPROM_ERROR_READBACK */ +#define AD9523_EEPROM_ERROR_READBACK_FAIL (1 << 0) + +/* AD9523_EEPROM_CTRL1 */ +#define AD9523_EEPROM_CTRL1_SOFT_EEPROM (1 << 1) +#define AD9523_EEPROM_CTRL1_EEPROM_WRITE_PROT_DIS (1 << 0) + +/* AD9523_EEPROM_CTRL2 */ +#define AD9523_EEPROM_CTRL2_REG2EEPROM (1 << 0) + +#define AD9523_NUM_CHAN 14 +#define AD9523_NUM_CHAN_ALT_CLK_SRC 10 + +/* Helpers to avoid excess line breaks */ +#define AD_IFE(_pde, _a, _b) ((pdata->_pde) ? _a : _b) +#define AD_IF(_pde, _a) AD_IFE(_pde, _a, 0) + +enum { + AD9523_STAT_PLL1_LD, + AD9523_STAT_PLL2_LD, + AD9523_STAT_REFA, + AD9523_STAT_REFB, + AD9523_STAT_REF_TEST, + AD9523_STAT_VCXO, + AD9523_STAT_PLL2_FB_CLK, + AD9523_STAT_PLL2_REF_CLK, + AD9523_SYNC, + AD9523_EEPROM, +}; + +enum { + AD9523_VCO1, + AD9523_VCO2, + AD9523_VCXO, + AD9523_NUM_CLK_SRC, +}; + +struct ad9523_state { + struct spi_device *spi; + struct regulator *reg; + struct ad9523_platform_data *pdata; + struct iio_chan_spec ad9523_channels[AD9523_NUM_CHAN]; + + unsigned long vcxo_freq; + unsigned long vco_freq; + unsigned long vco_out_freq[AD9523_NUM_CLK_SRC]; + unsigned char vco_out_map[AD9523_NUM_CHAN_ALT_CLK_SRC]; + + /* + * DMA (thus cache coherency maintenance) requires the + * transfer buffers to live in their own cache lines. + */ + union { + __be32 d32; + u8 d8[4]; + } data[2] ____cacheline_aligned; +}; + +static int ad9523_read(struct iio_dev *indio_dev, unsigned addr) +{ + struct ad9523_state *st = iio_priv(indio_dev); + struct spi_message m; + int ret; + + /* We encode the register size 1..3 bytes into the register address. + * On transfer we get the size from the register datum, and make sure + * the result is properly aligned. + */ + + struct spi_transfer t[] = { + { + .tx_buf = &st->data[0].d8[2], + .len = 2, + }, { + .rx_buf = &st->data[1].d8[4 - AD9523_TRANSF_LEN(addr)], + .len = AD9523_TRANSF_LEN(addr), + }, + }; + + spi_message_init(&m); + spi_message_add_tail(&t[0], &m); + spi_message_add_tail(&t[1], &m); + + st->data[0].d32 = cpu_to_be32(AD9523_READ | + AD9523_CNT(AD9523_TRANSF_LEN(addr)) | + AD9523_ADDR(addr)); + + ret = spi_sync(st->spi, &m); + if (ret < 0) + dev_err(&indio_dev->dev, "read failed (%d)", ret); + else + ret = be32_to_cpu(st->data[1].d32) & (0xFFFFFF >> + (8 * (3 - AD9523_TRANSF_LEN(addr)))); + + return ret; +}; + +static int ad9523_write(struct iio_dev *indio_dev, unsigned addr, unsigned val) +{ + struct ad9523_state *st = iio_priv(indio_dev); + struct spi_message m; + int ret; + struct spi_transfer t[] = { + { + .tx_buf = &st->data[0].d8[2], + .len = 2, + }, { + .tx_buf = &st->data[1].d8[4 - AD9523_TRANSF_LEN(addr)], + .len = AD9523_TRANSF_LEN(addr), + }, + }; + + spi_message_init(&m); + spi_message_add_tail(&t[0], &m); + spi_message_add_tail(&t[1], &m); + + st->data[0].d32 = cpu_to_be32(AD9523_WRITE | + AD9523_CNT(AD9523_TRANSF_LEN(addr)) | + AD9523_ADDR(addr)); + st->data[1].d32 = cpu_to_be32(val); + + ret = spi_sync(st->spi, &m); + + if (ret < 0) + dev_err(&indio_dev->dev, "write failed (%d)", ret); + + return ret; +} + +static int ad9523_io_update(struct iio_dev *indio_dev) +{ + return ad9523_write(indio_dev, AD9523_IO_UPDATE, AD9523_IO_UPDATE_EN); +} + +static int ad9523_vco_out_map(struct iio_dev *indio_dev, + unsigned ch, bool out) +{ + struct ad9523_state *st = iio_priv(indio_dev); + int ret; + unsigned mask; + + switch (ch) { + case 0 ... 3: + ret = ad9523_read(indio_dev, AD9523_PLL1_OUTPUT_CHANNEL_CTRL); + if (ret < 0) + break; + mask = AD9523_PLL1_OUTP_CH_CTRL_VCXO_SRC_SEL_CH0 << ch; + if (out) { + ret |= mask; + out = 2; + } else { + ret &= ~mask; + } + ret = ad9523_write(indio_dev, + AD9523_PLL1_OUTPUT_CHANNEL_CTRL, ret); + break; + case 4 ... 6: + ret = ad9523_read(indio_dev, AD9523_PLL1_OUTPUT_CTRL); + if (ret < 0) + break; + mask = AD9523_PLL1_OUTP_CTRL_VCO_DIV_SEL_CH4_M2 << (ch - 4); + if (out) + ret |= mask; + else + ret &= ~mask; + ret = ad9523_write(indio_dev, AD9523_PLL1_OUTPUT_CTRL, ret); + break; + case 7 ... 9: + ret = ad9523_read(indio_dev, AD9523_PLL1_OUTPUT_CHANNEL_CTRL); + if (ret < 0) + break; + mask = AD9523_PLL1_OUTP_CH_CTRL_VCO_DIV_SEL_CH7_M2 << (ch - 7); + if (out) + ret |= mask; + else + ret &= ~mask; + ret = ad9523_write(indio_dev, + AD9523_PLL1_OUTPUT_CHANNEL_CTRL, ret); + break; + default: + return 0; + } + + st->vco_out_map[ch] = out; + + return ret; +} + +static int ad9523_set_clock_provider(struct iio_dev *indio_dev, + unsigned ch, unsigned long freq) +{ + struct ad9523_state *st = iio_priv(indio_dev); + long tmp1, tmp2; + bool use_alt_clk_src; + + switch (ch) { + case 0 ... 3: + use_alt_clk_src = (freq == st->vco_out_freq[AD9523_VCXO]); + break; + case 4 ... 9: + tmp1 = st->vco_out_freq[AD9523_VCO1] / freq; + tmp2 = st->vco_out_freq[AD9523_VCO2] / freq; + tmp1 *= freq; + tmp2 *= freq; + use_alt_clk_src = (abs(tmp1 - freq) > abs(tmp2 - freq)); + break; + default: + /* Ch 10..14: No action required, return success */ + return 0; + } + + return ad9523_vco_out_map(indio_dev, ch, use_alt_clk_src); +} + +static int ad9523_store_eeprom(struct iio_dev *indio_dev) +{ + int ret, tmp; + + ret = ad9523_write(indio_dev, AD9523_EEPROM_CTRL1, + AD9523_EEPROM_CTRL1_EEPROM_WRITE_PROT_DIS); + if (ret < 0) + return ret; + ret = ad9523_write(indio_dev, AD9523_EEPROM_CTRL2, + AD9523_EEPROM_CTRL2_REG2EEPROM); + if (ret < 0) + return ret; + + tmp = 4; + do { + msleep(16); + ret = ad9523_read(indio_dev, + AD9523_EEPROM_DATA_XFER_STATUS); + if (ret < 0) + return ret; + } while ((ret & AD9523_EEPROM_DATA_XFER_IN_PROGRESS) && tmp--); + + ret = ad9523_write(indio_dev, AD9523_EEPROM_CTRL1, 0); + if (ret < 0) + return ret; + + ret = ad9523_read(indio_dev, AD9523_EEPROM_ERROR_READBACK); + if (ret < 0) + return ret; + + if (ret & AD9523_EEPROM_ERROR_READBACK_FAIL) { + dev_err(&indio_dev->dev, "Verify EEPROM failed"); + ret = -EIO; + } + + return ret; +} + +static int ad9523_sync(struct iio_dev *indio_dev) +{ + int ret, tmp; + + ret = ad9523_read(indio_dev, AD9523_STATUS_SIGNALS); + if (ret < 0) + return ret; + + tmp = ret; + tmp |= AD9523_STATUS_SIGNALS_SYNC_MAN_CTRL; + + ret = ad9523_write(indio_dev, AD9523_STATUS_SIGNALS, tmp); + if (ret < 0) + return ret; + + ad9523_io_update(indio_dev); + tmp &= ~AD9523_STATUS_SIGNALS_SYNC_MAN_CTRL; + + ret = ad9523_write(indio_dev, AD9523_STATUS_SIGNALS, tmp); + if (ret < 0) + return ret; + + return ad9523_io_update(indio_dev); +} + +static ssize_t ad9523_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t len) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct iio_dev_attr *this_attr = to_iio_dev_attr(attr); + bool state; + int ret; + + ret = strtobool(buf, &state); + if (ret < 0) + return ret; + + if (!state) + return 0; + + mutex_lock(&indio_dev->mlock); + switch ((u32)this_attr->address) { + case AD9523_SYNC: + ret = ad9523_sync(indio_dev); + break; + case AD9523_EEPROM: + ret = ad9523_store_eeprom(indio_dev); + break; + default: + ret = -ENODEV; + } + mutex_unlock(&indio_dev->mlock); + + return ret ? ret : len; +} + +static ssize_t ad9523_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + struct iio_dev *indio_dev = dev_to_iio_dev(dev); + struct iio_dev_attr *this_attr = to_iio_dev_attr(attr); + int ret; + + mutex_lock(&indio_dev->mlock); + ret = ad9523_read(indio_dev, AD9523_READBACK_0); + if (ret >= 0) { + ret = sprintf(buf, "%d\n", !!(ret & (1 << + (u32)this_attr->address))); + } + mutex_unlock(&indio_dev->mlock); + + return ret; +} + +static IIO_DEVICE_ATTR(pll1_locked, S_IRUGO, + ad9523_show, + NULL, + AD9523_STAT_PLL1_LD); + +static IIO_DEVICE_ATTR(pll2_locked, S_IRUGO, + ad9523_show, + NULL, + AD9523_STAT_PLL2_LD); + +static IIO_DEVICE_ATTR(pll1_reference_clk_a_present, S_IRUGO, + ad9523_show, + NULL, + AD9523_STAT_REFA); + +static IIO_DEVICE_ATTR(pll1_reference_clk_b_present, S_IRUGO, + ad9523_show, + NULL, + AD9523_STAT_REFB); + +static IIO_DEVICE_ATTR(pll1_reference_clk_test_present, S_IRUGO, + ad9523_show, + NULL, + AD9523_STAT_REF_TEST); + +static IIO_DEVICE_ATTR(vcxo_clk_present, S_IRUGO, + ad9523_show, + NULL, + AD9523_STAT_VCXO); + +static IIO_DEVICE_ATTR(pll2_feedback_clk_present, S_IRUGO, + ad9523_show, + NULL, + AD9523_STAT_PLL2_FB_CLK); + +static IIO_DEVICE_ATTR(pll2_reference_clk_present, S_IRUGO, + ad9523_show, + NULL, + AD9523_STAT_PLL2_REF_CLK); + +static IIO_DEVICE_ATTR(sync_dividers, S_IWUSR, + NULL, + ad9523_store, + AD9523_SYNC); + +static IIO_DEVICE_ATTR(store_eeprom, S_IWUSR, + NULL, + ad9523_store, + AD9523_EEPROM); + +static struct attribute *ad9523_attributes[] = { + &iio_dev_attr_sync_dividers.dev_attr.attr, + &iio_dev_attr_store_eeprom.dev_attr.attr, + &iio_dev_attr_pll2_feedback_clk_present.dev_attr.attr, + &iio_dev_attr_pll2_reference_clk_present.dev_attr.attr, + &iio_dev_attr_pll1_reference_clk_a_present.dev_attr.attr, + &iio_dev_attr_pll1_reference_clk_b_present.dev_attr.attr, + &iio_dev_attr_pll1_reference_clk_test_present.dev_attr.attr, + &iio_dev_attr_vcxo_clk_present.dev_attr.attr, + &iio_dev_attr_pll1_locked.dev_attr.attr, + &iio_dev_attr_pll2_locked.dev_attr.attr, + NULL, +}; + +static const struct attribute_group ad9523_attribute_group = { + .attrs = ad9523_attributes, +}; + +static int ad9523_read_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int *val, + int *val2, + long m) +{ + struct ad9523_state *st = iio_priv(indio_dev); + unsigned code; + int ret; + + mutex_lock(&indio_dev->mlock); + ret = ad9523_read(indio_dev, AD9523_CHANNEL_CLOCK_DIST(chan->channel)); + mutex_unlock(&indio_dev->mlock); + + if (ret < 0) + return ret; + + switch (m) { + case IIO_CHAN_INFO_RAW: + *val = !(ret & AD9523_CLK_DIST_PWR_DOWN_EN); + return IIO_VAL_INT; + case IIO_CHAN_INFO_FREQUENCY: + *val = st->vco_out_freq[st->vco_out_map[chan->channel]] / + AD9523_CLK_DIST_DIV_REV(ret); + return IIO_VAL_INT; + case IIO_CHAN_INFO_PHASE: + code = (AD9523_CLK_DIST_DIV_PHASE_REV(ret) * 3141592) / + AD9523_CLK_DIST_DIV_REV(ret); + *val = code / 1000000; + *val2 = (code % 1000000) * 10; + return IIO_VAL_INT_PLUS_MICRO; + default: + return -EINVAL; + } +}; + +static int ad9523_write_raw(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + int val, + int val2, + long mask) +{ + struct ad9523_state *st = iio_priv(indio_dev); + unsigned reg; + int ret, tmp, code; + + mutex_lock(&indio_dev->mlock); + ret = ad9523_read(indio_dev, AD9523_CHANNEL_CLOCK_DIST(chan->channel)); + if (ret < 0) + goto out; + + reg = ret; + + switch (mask) { + case IIO_CHAN_INFO_RAW: + if (val) + reg &= ~AD9523_CLK_DIST_PWR_DOWN_EN; + else + reg |= AD9523_CLK_DIST_PWR_DOWN_EN; + break; + case IIO_CHAN_INFO_FREQUENCY: + if (val <= 0) { + ret = -EINVAL; + goto out; + } + ret = ad9523_set_clock_provider(indio_dev, chan->channel, val); + if (ret < 0) + goto out; + tmp = st->vco_out_freq[st->vco_out_map[chan->channel]] / val; + tmp = clamp(tmp, 1, 1024); + reg &= ~(0x3FF << 8); + reg |= AD9523_CLK_DIST_DIV(tmp); + break; + case IIO_CHAN_INFO_PHASE: + code = val * 1000000 + val2 % 1000000; + tmp = (code * AD9523_CLK_DIST_DIV_REV(ret)) / 3141592; + tmp = clamp(tmp, 0, 63); + reg &= ~AD9523_CLK_DIST_DIV_PHASE(~0); + reg |= AD9523_CLK_DIST_DIV_PHASE(tmp); + break; + default: + ret = -EINVAL; + goto out; + } + + ret = ad9523_write(indio_dev, AD9523_CHANNEL_CLOCK_DIST(chan->channel), + reg); + if (ret < 0) + goto out; + + ad9523_io_update(indio_dev); +out: + mutex_unlock(&indio_dev->mlock); + return ret; +} + +static int ad9523_reg_access(struct iio_dev *indio_dev, + unsigned reg, unsigned writeval, + unsigned *readval) +{ + int ret; + + mutex_lock(&indio_dev->mlock); + if (readval == NULL) { + ret = ad9523_write(indio_dev, reg | AD9523_R1B, writeval); + ad9523_io_update(indio_dev); + } else { + ret = ad9523_read(indio_dev, reg | AD9523_R1B); + if (ret < 0) + return ret; + *readval = ret; + ret = 0; + } + mutex_unlock(&indio_dev->mlock); + + return ret; +} + +static const struct iio_info ad9523_info = { + .read_raw = &ad9523_read_raw, + .write_raw = &ad9523_write_raw, + .debugfs_reg_access = &ad9523_reg_access, + .attrs = &ad9523_attribute_group, + .driver_module = THIS_MODULE, +}; + +static int ad9523_setup(struct iio_dev *indio_dev) +{ + struct ad9523_state *st = iio_priv(indio_dev); + struct ad9523_platform_data *pdata = st->pdata; + struct ad9523_channel_spec *chan; + unsigned long active_mask = 0; + int ret, i; + + ret = ad9523_write(indio_dev, AD9523_SERIAL_PORT_CONFIG, + AD9523_SER_CONF_SOFT_RESET | + (st->spi->mode & SPI_3WIRE ? 0 : + AD9523_SER_CONF_SDO_ACTIVE)); + if (ret < 0) + return ret; + + ret = ad9523_write(indio_dev, AD9523_READBACK_CTRL, + AD9523_READBACK_CTRL_READ_BUFFERED); + if (ret < 0) + return ret; + + ret = ad9523_io_update(indio_dev); + if (ret < 0) + return ret; + + /* + * PLL1 Setup + */ + ret = ad9523_write(indio_dev, AD9523_PLL1_REF_A_DIVIDER, + pdata->refa_r_div); + if (ret < 0) + return ret; + + ret = ad9523_write(indio_dev, AD9523_PLL1_REF_B_DIVIDER, + pdata->refb_r_div); + if (ret < 0) + return ret; + + ret = ad9523_write(indio_dev, AD9523_PLL1_FEEDBACK_DIVIDER, + pdata->pll1_feedback_div); + if (ret < 0) + return ret; + + ret = ad9523_write(indio_dev, AD9523_PLL1_CHARGE_PUMP_CTRL, + AD9523_PLL1_CHARGE_PUMP_CURRENT_nA(pdata-> + pll1_charge_pump_current_nA) | + AD9523_PLL1_CHARGE_PUMP_MODE_NORMAL | + AD9523_PLL1_BACKLASH_PW_MIN); + if (ret < 0) + return ret; + + ret = ad9523_write(indio_dev, AD9523_PLL1_INPUT_RECEIVERS_CTRL, + AD_IF(refa_diff_rcv_en, AD9523_PLL1_REFA_RCV_EN) | + AD_IF(refb_diff_rcv_en, AD9523_PLL1_REFB_RCV_EN) | + AD_IF(osc_in_diff_en, AD9523_PLL1_OSC_IN_DIFF_EN) | + AD_IF(osc_in_cmos_neg_inp_en, + AD9523_PLL1_OSC_IN_CMOS_NEG_INP_EN) | + AD_IF(refa_diff_rcv_en, AD9523_PLL1_REFA_DIFF_RCV_EN) | + AD_IF(refb_diff_rcv_en, AD9523_PLL1_REFB_DIFF_RCV_EN)); + if (ret < 0) + return ret; + + ret = ad9523_write(indio_dev, AD9523_PLL1_REF_CTRL, + AD_IF(zd_in_diff_en, AD9523_PLL1_ZD_IN_DIFF_EN) | + AD_IF(zd_in_cmos_neg_inp_en, + AD9523_PLL1_ZD_IN_CMOS_NEG_INP_EN) | + AD_IF(zero_delay_mode_internal_en, + AD9523_PLL1_ZERO_DELAY_MODE_INT) | + AD_IF(osc_in_feedback_en, AD9523_PLL1_OSC_IN_PLL_FEEDBACK_EN) | + AD_IF(refa_cmos_neg_inp_en, AD9523_PLL1_REFA_CMOS_NEG_INP_EN) | + AD_IF(refb_cmos_neg_inp_en, AD9523_PLL1_REFB_CMOS_NEG_INP_EN)); + if (ret < 0) + return ret; + + ret = ad9523_write(indio_dev, AD9523_PLL1_MISC_CTRL, + AD9523_PLL1_REFB_INDEP_DIV_CTRL_EN | + AD9523_PLL1_REF_MODE(pdata->ref_mode)); + if (ret < 0) + return ret; + + ret = ad9523_write(indio_dev, AD9523_PLL1_LOOP_FILTER_CTRL, + AD9523_PLL1_LOOP_FILTER_RZERO(pdata->pll1_loop_filter_rzero)); + if (ret < 0) + return ret; + /* + * PLL2 Setup + */ + + ret = ad9523_write(indio_dev, AD9523_PLL2_CHARGE_PUMP, + AD9523_PLL2_CHARGE_PUMP_CURRENT_nA(pdata-> + pll2_charge_pump_current_nA)); + if (ret < 0) + return ret; + + ret = ad9523_write(indio_dev, AD9523_PLL2_FEEDBACK_DIVIDER_AB, + AD9523_PLL2_FB_NDIV_A_CNT(pdata->pll2_ndiv_a_cnt) | + AD9523_PLL2_FB_NDIV_B_CNT(pdata->pll2_ndiv_b_cnt)); + if (ret < 0) + return ret; + + ret = ad9523_write(indio_dev, AD9523_PLL2_CTRL, + AD9523_PLL2_CHARGE_PUMP_MODE_NORMAL | + AD9523_PLL2_BACKLASH_CTRL_EN | + AD_IF(pll2_freq_doubler_en, AD9523_PLL2_FREQ_DOUBLER_EN)); + if (ret < 0) + return ret; + + st->vco_freq = (pdata->vcxo_freq * (pdata->pll2_freq_doubler_en ? 2 : 1) + / pdata->pll2_r2_div) * AD9523_PLL2_FB_NDIV(pdata-> + pll2_ndiv_a_cnt, pdata->pll2_ndiv_b_cnt); + + ret = ad9523_write(indio_dev, AD9523_PLL2_VCO_CTRL, + AD9523_PLL2_VCO_CALIBRATE); + if (ret < 0) + return ret; + + ret = ad9523_write(indio_dev, AD9523_PLL2_VCO_DIVIDER, + AD9523_PLL2_VCO_DIV_M1(pdata->pll2_vco_diff_m1) | + AD9523_PLL2_VCO_DIV_M2(pdata->pll2_vco_diff_m2) | + AD_IFE(pll2_vco_diff_m1, 0, + AD9523_PLL2_VCO_DIV_M1_PWR_DOWN_EN) | + AD_IFE(pll2_vco_diff_m2, 0, + AD9523_PLL2_VCO_DIV_M2_PWR_DOWN_EN)); + if (ret < 0) + return ret; + + if (pdata->pll2_vco_diff_m1) + st->vco_out_freq[AD9523_VCO1] = + st->vco_freq / pdata->pll2_vco_diff_m1; + + if (pdata->pll2_vco_diff_m2) + st->vco_out_freq[AD9523_VCO2] = + st->vco_freq / pdata->pll2_vco_diff_m2; + + st->vco_out_freq[AD9523_VCXO] = pdata->vcxo_freq; + + ret = ad9523_write(indio_dev, AD9523_PLL2_R2_DIVIDER, + AD9523_PLL2_R2_DIVIDER_VAL(pdata->pll2_r2_div)); + if (ret < 0) + return ret; + + ret = ad9523_write(indio_dev, AD9523_PLL2_LOOP_FILTER_CTRL, + AD9523_PLL2_LOOP_FILTER_CPOLE1(pdata->cpole1) | + AD9523_PLL2_LOOP_FILTER_RZERO(pdata->rzero) | + AD9523_PLL2_LOOP_FILTER_RPOLE2(pdata->rpole2) | + AD_IF(rzero_bypass_en, + AD9523_PLL2_LOOP_FILTER_RZERO_BYPASS_EN)); + if (ret < 0) + return ret; + + for (i = 0; i < pdata->num_channels; i++) { + chan = &pdata->channels[i]; + if (chan->channel_num < AD9523_NUM_CHAN) { + __set_bit(chan->channel_num, &active_mask); + ret = ad9523_write(indio_dev, + AD9523_CHANNEL_CLOCK_DIST(chan->channel_num), + AD9523_CLK_DIST_DRIVER_MODE(chan->driver_mode) | + AD9523_CLK_DIST_DIV(chan->channel_divider) | + AD9523_CLK_DIST_DIV_PHASE(chan->divider_phase) | + (chan->sync_ignore_en ? + AD9523_CLK_DIST_IGNORE_SYNC_EN : 0) | + (chan->divider_output_invert_en ? + AD9523_CLK_DIST_INV_DIV_OUTPUT_EN : 0) | + (chan->low_power_mode_en ? + AD9523_CLK_DIST_LOW_PWR_MODE_EN : 0) | + (chan->output_dis ? + AD9523_CLK_DIST_PWR_DOWN_EN : 0)); + if (ret < 0) + return ret; + + ret = ad9523_vco_out_map(indio_dev, chan->channel_num, + chan->use_alt_clock_src); + if (ret < 0) + return ret; + + st->ad9523_channels[i].type = IIO_ALTVOLTAGE; + st->ad9523_channels[i].output = 1; + st->ad9523_channels[i].indexed = 1; + st->ad9523_channels[i].channel = chan->channel_num; + st->ad9523_channels[i].extend_name = + chan->extended_name; + st->ad9523_channels[i].info_mask = + IIO_CHAN_INFO_RAW_SEPARATE_BIT | + IIO_CHAN_INFO_PHASE_SEPARATE_BIT | + IIO_CHAN_INFO_FREQUENCY_SEPARATE_BIT; + } + } + + for_each_clear_bit(i, &active_mask, AD9523_NUM_CHAN) + ad9523_write(indio_dev, + AD9523_CHANNEL_CLOCK_DIST(i), + AD9523_CLK_DIST_DRIVER_MODE(TRISTATE) | + AD9523_CLK_DIST_PWR_DOWN_EN); + + ret = ad9523_write(indio_dev, AD9523_POWER_DOWN_CTRL, 0); + if (ret < 0) + return ret; + + ret = ad9523_write(indio_dev, AD9523_STATUS_SIGNALS, + AD9523_STATUS_MONITOR_01_PLL12_LOCKED); + if (ret < 0) + return ret; + + ret = ad9523_io_update(indio_dev); + if (ret < 0) + return ret; + + return 0; +} + +static int __devinit ad9523_probe(struct spi_device *spi) +{ + struct ad9523_platform_data *pdata = spi->dev.platform_data; + struct iio_dev *indio_dev; + struct ad9523_state *st; + int ret; + + if (!pdata) { + dev_err(&spi->dev, "no platform data?\n"); + return -EINVAL; + } + + indio_dev = iio_device_alloc(sizeof(*st)); + if (indio_dev == NULL) + return -ENOMEM; + + st = iio_priv(indio_dev); + + st->reg = regulator_get(&spi->dev, "vcc"); + if (!IS_ERR(st->reg)) { + ret = regulator_enable(st->reg); + if (ret) + goto error_put_reg; + } + + spi_set_drvdata(spi, indio_dev); + st->spi = spi; + st->pdata = pdata; + + indio_dev->dev.parent = &spi->dev; + indio_dev->name = (pdata->name[0] != 0) ? pdata->name : + spi_get_device_id(spi)->name; + indio_dev->info = &ad9523_info; + indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->channels = st->ad9523_channels; + indio_dev->num_channels = pdata->num_channels; + + ret = ad9523_setup(indio_dev); + if (ret < 0) + goto error_disable_reg; + + ret = iio_device_register(indio_dev); + if (ret) + goto error_disable_reg; + + dev_info(&spi->dev, "probed %s\n", indio_dev->name); + + return 0; + +error_disable_reg: + if (!IS_ERR(st->reg)) + regulator_disable(st->reg); +error_put_reg: + if (!IS_ERR(st->reg)) + regulator_put(st->reg); + + iio_device_free(indio_dev); + + return ret; +} + +static int __devexit ad9523_remove(struct spi_device *spi) +{ + struct iio_dev *indio_dev = spi_get_drvdata(spi); + struct ad9523_state *st = iio_priv(indio_dev); + + iio_device_unregister(indio_dev); + + if (!IS_ERR(st->reg)) { + regulator_disable(st->reg); + regulator_put(st->reg); + } + + iio_device_free(indio_dev); + + return 0; +} + +static const struct spi_device_id ad9523_id[] = { + {"ad9523-1", 9523}, + {} +}; +MODULE_DEVICE_TABLE(spi, ad9523_id); + +static struct spi_driver ad9523_driver = { + .driver = { + .name = "ad9523", + .owner = THIS_MODULE, + }, + .probe = ad9523_probe, + .remove = __devexit_p(ad9523_remove), + .id_table = ad9523_id, +}; +module_spi_driver(ad9523_driver); + +MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>"); +MODULE_DESCRIPTION("Analog Devices AD9523 CLOCKDIST/PLL"); +MODULE_LICENSE("GPL v2"); diff --git a/include/linux/iio/frequency/ad9523.h b/include/linux/iio/frequency/ad9523.h new file mode 100644 index 0000000..12ce3ee --- /dev/null +++ b/include/linux/iio/frequency/ad9523.h @@ -0,0 +1,195 @@ +/* + * AD9523 SPI Low Jitter Clock Generator + * + * Copyright 2012 Analog Devices Inc. + * + * Licensed under the GPL-2. + */ + +#ifndef IIO_FREQUENCY_AD9523_H_ +#define IIO_FREQUENCY_AD9523_H_ + +enum outp_drv_mode { + TRISTATE, + LVPECL_8mA, + LVDS_4mA, + LVDS_7mA, + HSTL0_16mA, + HSTL1_8mA, + CMOS_CONF1, + CMOS_CONF2, + CMOS_CONF3, + CMOS_CONF4, + CMOS_CONF5, + CMOS_CONF6, + CMOS_CONF7, + CMOS_CONF8, + CMOS_CONF9 +}; + +enum ref_sel_mode { + NONEREVERTIVE_STAY_ON_REFB, + REVERT_TO_REFA, + SELECT_REFA, + SELECT_REFB, + EXT_REF_SEL +}; + +/** + * struct ad9523_channel_spec - Output channel configuration + * + * @channel_num: Output channel number. + * @divider_output_invert_en: Invert the polarity of the output clock. + * @sync_ignore_en: Ignore chip-level SYNC signal. + * @low_power_mode_en: Reduce power used in the differential output modes. + * @use_alt_clock_src: Channel divider uses alternative clk source. + * @output_dis: Disables, powers down the entire channel. + * @driver_mode: Output driver mode (logic level family). + * @divider_phase: Divider initial phase after a SYNC. Range 0..63 + LSB = 1/2 of a period of the divider input clock. + * @channel_divider: 10-bit channel divider. + * @extended_name: Optional descriptive channel name. + */ + +struct ad9523_channel_spec { + unsigned channel_num; + bool divider_output_invert_en; + bool sync_ignore_en; + bool low_power_mode_en; + /* CH0..CH3 VCXO, CH4..CH9 VCO2 */ + bool use_alt_clock_src; + bool output_dis; + enum outp_drv_mode driver_mode; + unsigned char divider_phase; + unsigned short channel_divider; + char extended_name[16]; +}; + +enum pll1_rzero_resistor { + RZERO_883_OHM, + RZERO_677_OHM, + RZERO_341_OHM, + RZERO_135_OHM, + RZERO_10_OHM, + RZERO_USE_EXT_RES = 8, +}; + +enum rpole2_resistor { + RPOLE2_900_OHM, + RPOLE2_450_OHM, + RPOLE2_300_OHM, + RPOLE2_225_OHM, +}; + +enum rzero_resistor { + RZERO_3250_OHM, + RZERO_2750_OHM, + RZERO_2250_OHM, + RZERO_2100_OHM, + RZERO_3000_OHM, + RZERO_2500_OHM, + RZERO_2000_OHM, + RZERO_1850_OHM, +}; + +enum cpole1_capacitor { + CPOLE1_0_PF, + CPOLE1_8_PF, + CPOLE1_16_PF, + CPOLE1_24_PF, + _CPOLE1_24_PF, /* place holder */ + CPOLE1_32_PF, + CPOLE1_40_PF, + CPOLE1_48_PF, +}; + +/** + * struct ad9523_platform_data - platform specific information + * + * @vcxo_freq: External VCXO frequency in Hz + * @refa_diff_rcv_en: REFA differential/single-ended input selection. + * @refb_diff_rcv_en: REFB differential/single-ended input selection. + * @zd_in_diff_en: Zero Delay differential/single-ended input selection. + * @osc_in_diff_en: OSC differential/ single-ended input selection. + * @refa_cmos_neg_inp_en: REFA single-ended neg./pos. input enable. + * @refb_cmos_neg_inp_en: REFB single-ended neg./pos. input enable. + * @zd_in_cmos_neg_inp_en: Zero Delay single-ended neg./pos. input enable. + * @osc_in_cmos_neg_inp_en: OSC single-ended neg./pos. input enable. + * @refa_r_div: PLL1 10-bit REFA R divider. + * @refb_r_div: PLL1 10-bit REFB R divider. + * @pll1_feedback_div: PLL1 10-bit Feedback N divider. + * @pll1_charge_pump_current_nA: Magnitude of PLL1 charge pump current (nA). + * @zero_delay_mode_internal_en: Internal, external Zero Delay mode selection. + * @osc_in_feedback_en: PLL1 feedback path, local feedback from + * the OSC_IN receiver or zero delay mode + * @pll1_loop_filter_rzero: PLL1 Loop Filter Zero Resistor selection. + * @ref_mode: Reference selection mode. + * @pll2_charge_pump_current_nA: Magnitude of PLL2 charge pump current (nA). + * @pll2_ndiv_a_cnt: PLL2 Feedback N-divider, A Counter, range 0..4. + * @pll2_ndiv_b_cnt: PLL2 Feedback N-divider, B Counter, range 0..63. + * @pll2_freq_doubler_en: PLL2 frequency doubler enable. + * @pll2_r2_div: PLL2 R2 divider, range 0..31. + * @pll2_vco_diff_m1: VCO1 divider, range 3..5. + * @pll2_vco_diff_m2: VCO2 divider, range 3..5. + * @rpole2: PLL2 loop filter Rpole resistor value. + * @rzero: PLL2 loop filter Rzero resistor value. + * @cpole1: PLL2 loop filter Cpole capacitor value. + * @rzero_bypass_en: PLL2 loop filter Rzero bypass enable. + * @num_channels: Array size of struct ad9523_channel_spec. + * @channels: Pointer to channel array. + * @name: Optional alternative iio device name. + */ + +struct ad9523_platform_data { + unsigned long vcxo_freq; + + /* Differential/ Single-Ended Input Configuration */ + bool refa_diff_rcv_en; + bool refb_diff_rcv_en; + bool zd_in_diff_en; + bool osc_in_diff_en; + + /* + * Valid if differential input disabled + * if false defaults to pos input + */ + bool refa_cmos_neg_inp_en; + bool refb_cmos_neg_inp_en; + bool zd_in_cmos_neg_inp_en; + bool osc_in_cmos_neg_inp_en; + + /* PLL1 Setting */ + unsigned short refa_r_div; + unsigned short refb_r_div; + unsigned short pll1_feedback_div; + unsigned short pll1_charge_pump_current_nA; + bool zero_delay_mode_internal_en; + bool osc_in_feedback_en; + enum pll1_rzero_resistor pll1_loop_filter_rzero; + + /* Reference */ + enum ref_sel_mode ref_mode; + + /* PLL2 Setting */ + unsigned int pll2_charge_pump_current_nA; + unsigned char pll2_ndiv_a_cnt; + unsigned char pll2_ndiv_b_cnt; + bool pll2_freq_doubler_en; + unsigned char pll2_r2_div; + unsigned char pll2_vco_diff_m1; /* 3..5 */ + unsigned char pll2_vco_diff_m2; /* 3..5 */ + + /* Loop Filter PLL2 */ + enum rpole2_resistor rpole2; + enum rzero_resistor rzero; + enum cpole1_capacitor cpole1; + bool rzero_bypass_en; + + /* Output Channel Configuration */ + int num_channels; + struct ad9523_channel_spec *channels; + + char name[SPI_NAME_SIZE]; +}; + +#endif /* IIO_FREQUENCY_AD9523_H_ */ |