diff options
| -rw-r--r-- | arch/powerpc/include/asm/pci-bridge.h | 3 | ||||
| -rw-r--r-- | arch/powerpc/include/asm/pci.h | 5 | ||||
| -rw-r--r-- | arch/powerpc/kernel/pci-common.c | 41 | ||||
| -rw-r--r-- | arch/powerpc/kernel/rtas_pci.c | 48 | ||||
| -rw-r--r-- | arch/powerpc/platforms/pseries/pci_dlpar.c | 163 | ||||
| -rw-r--r-- | drivers/pci/hotplug/rpadlpar_core.c | 69 |
6 files changed, 150 insertions, 179 deletions
diff --git a/arch/powerpc/include/asm/pci-bridge.h b/arch/powerpc/include/asm/pci-bridge.h index 2dfa8a3..fa8b3b7 100644 --- a/arch/powerpc/include/asm/pci-bridge.h +++ b/arch/powerpc/include/asm/pci-bridge.h @@ -241,9 +241,6 @@ extern void pcibios_remove_pci_devices(struct pci_bus *bus); /** Discover new pci devices under this bus, and add them */ extern void pcibios_add_pci_devices(struct pci_bus *bus); -extern void pcibios_fixup_new_pci_devices(struct pci_bus *bus); - -extern int pcibios_remove_root_bus(struct pci_controller *phb); static inline struct pci_controller *pci_bus_to_host(const struct pci_bus *bus) { diff --git a/arch/powerpc/include/asm/pci.h b/arch/powerpc/include/asm/pci.h index 32e03e6..1c721a6 100644 --- a/arch/powerpc/include/asm/pci.h +++ b/arch/powerpc/include/asm/pci.h @@ -204,15 +204,14 @@ static inline struct resource *pcibios_select_root(struct pci_dev *pdev, return root; } -extern void pcibios_setup_new_device(struct pci_dev *dev); - extern void pcibios_claim_one_bus(struct pci_bus *b); -extern void pcibios_allocate_bus_resources(struct pci_bus *bus); +extern void pcibios_finish_adding_to_bus(struct pci_bus *bus); extern void pcibios_resource_survey(void); extern struct pci_controller *init_phb_dynamic(struct device_node *dn); +extern int remove_phb_dynamic(struct pci_controller *phb); extern struct pci_dev *of_create_pci_dev(struct device_node *node, struct pci_bus *bus, int devfn); diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c index f965397..f3fd7eb 100644 --- a/arch/powerpc/kernel/pci-common.c +++ b/arch/powerpc/kernel/pci-common.c @@ -203,7 +203,7 @@ char __devinit *pcibios_setup(char *str) return str; } -void __devinit pcibios_setup_new_device(struct pci_dev *dev) +static void __devinit pcibios_setup_new_device(struct pci_dev *dev) { struct dev_archdata *sd = &dev->dev.archdata; @@ -221,7 +221,6 @@ void __devinit pcibios_setup_new_device(struct pci_dev *dev) if (ppc_md.pci_dma_dev_setup) ppc_md.pci_dma_dev_setup(dev); } -EXPORT_SYMBOL(pcibios_setup_new_device); /* * Reads the interrupt pin to determine if interrupt is use by card. @@ -1397,9 +1396,10 @@ void __init pcibios_resource_survey(void) #ifdef CONFIG_HOTPLUG -/* This is used by the pSeries hotplug driver to allocate resource +/* This is used by the PCI hotplug driver to allocate resource * of newly plugged busses. We can try to consolidate with the - * rest of the code later, for now, keep it as-is + * rest of the code later, for now, keep it as-is as our main + * resource allocation function doesn't deal with sub-trees yet. */ void __devinit pcibios_claim_one_bus(struct pci_bus *bus) { @@ -1414,6 +1414,14 @@ void __devinit pcibios_claim_one_bus(struct pci_bus *bus) if (r->parent || !r->start || !r->flags) continue; + + pr_debug("PCI: Claiming %s: " + "Resource %d: %016llx..%016llx [%x]\n", + pci_name(dev), i, + (unsigned long long)r->start, + (unsigned long long)r->end, + (unsigned int)r->flags); + pci_claim_resource(dev, i); } } @@ -1422,6 +1430,31 @@ void __devinit pcibios_claim_one_bus(struct pci_bus *bus) pcibios_claim_one_bus(child_bus); } EXPORT_SYMBOL_GPL(pcibios_claim_one_bus); + + +/* pcibios_finish_adding_to_bus + * + * This is to be called by the hotplug code after devices have been + * added to a bus, this include calling it for a PHB that is just + * being added + */ +void pcibios_finish_adding_to_bus(struct pci_bus *bus) +{ + pr_debug("PCI: Finishing adding to hotplug bus %04x:%02x\n", + pci_domain_nr(bus), bus->number); + + /* Allocate bus and devices resources */ + pcibios_allocate_bus_resources(bus); + pcibios_claim_one_bus(bus); + + /* Add new devices to global lists. Register in proc, sysfs. */ + pci_bus_add_devices(bus); + + /* Fixup EEH */ + eeh_add_device_tree_late(bus); +} +EXPORT_SYMBOL_GPL(pcibios_finish_adding_to_bus); + #endif /* CONFIG_HOTPLUG */ int pcibios_enable_device(struct pci_dev *dev, int mask) diff --git a/arch/powerpc/kernel/rtas_pci.c b/arch/powerpc/kernel/rtas_pci.c index 589a279..8869001 100644 --- a/arch/powerpc/kernel/rtas_pci.c +++ b/arch/powerpc/kernel/rtas_pci.c @@ -301,51 +301,3 @@ void __init find_and_init_phbs(void) #endif /* CONFIG_PPC32 */ } } - -/* RPA-specific bits for removing PHBs */ -int pcibios_remove_root_bus(struct pci_controller *phb) -{ - struct pci_bus *b = phb->bus; - struct resource *res; - int rc, i; - - res = b->resource[0]; - if (!res->flags) { - printk(KERN_ERR "%s: no IO resource for PHB %s\n", __func__, - b->name); - return 1; - } - - rc = pcibios_unmap_io_space(b); - if (rc) { - printk(KERN_ERR "%s: failed to unmap IO on bus %s\n", - __func__, b->name); - return 1; - } - - if (release_resource(res)) { - printk(KERN_ERR "%s: failed to release IO on bus %s\n", - __func__, b->name); - return 1; - } - - for (i = 1; i < 3; ++i) { - res = b->resource[i]; - if (!res->flags && i == 0) { - printk(KERN_ERR "%s: no MEM resource for PHB %s\n", - __func__, b->name); - return 1; - } - if (res->flags && release_resource(res)) { - printk(KERN_ERR - "%s: failed to release IO %d on bus %s\n", - __func__, i, b->name); - return 1; - } - } - - pcibios_free_controller(phb); - - return 0; -} -EXPORT_SYMBOL(pcibios_remove_root_bus); diff --git a/arch/powerpc/platforms/pseries/pci_dlpar.c b/arch/powerpc/platforms/pseries/pci_dlpar.c index 7190493..5e1ed3d 100644 --- a/arch/powerpc/platforms/pseries/pci_dlpar.c +++ b/arch/powerpc/platforms/pseries/pci_dlpar.c @@ -25,6 +25,8 @@ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ +#undef DEBUG + #include <linux/pci.h> #include <asm/pci-bridge.h> #include <asm/ppc-pci.h> @@ -69,74 +71,25 @@ EXPORT_SYMBOL_GPL(pcibios_find_pci_bus); * Remove all of the PCI devices under this bus both from the * linux pci device tree, and from the powerpc EEH address cache. */ -void -pcibios_remove_pci_devices(struct pci_bus *bus) +void pcibios_remove_pci_devices(struct pci_bus *bus) { - struct pci_dev *dev, *tmp; + struct pci_dev *dev, *tmp; + struct pci_bus *child_bus; + + /* First go down child busses */ + list_for_each_entry(child_bus, &bus->children, node) + pcibios_remove_pci_devices(child_bus); + pr_debug("PCI: Removing devices on bus %04x:%02x\n", + pci_domain_nr(bus), bus->number); list_for_each_entry_safe(dev, tmp, &bus->devices, bus_list) { + pr_debug(" * Removing %s...\n", pci_name(dev)); eeh_remove_bus_device(dev); - pci_remove_bus_device(dev); - } + pci_remove_bus_device(dev); + } } EXPORT_SYMBOL_GPL(pcibios_remove_pci_devices); -/* Must be called before pci_bus_add_devices */ -void -pcibios_fixup_new_pci_devices(struct pci_bus *bus) -{ - struct pci_dev *dev; - - list_for_each_entry(dev, &bus->devices, bus_list) { - /* Skip already-added devices */ - if (!dev->is_added) { - int i; - - /* Fill device archdata and setup iommu table */ - pcibios_setup_new_device(dev); - - pci_read_irq_line(dev); - for (i = 0; i < PCI_NUM_RESOURCES; i++) { - struct resource *r = &dev->resource[i]; - - if (r->parent || !r->start || !r->flags) - continue; - pci_claim_resource(dev, i); - } - } - } -} -EXPORT_SYMBOL_GPL(pcibios_fixup_new_pci_devices); - -static int -pcibios_pci_config_bridge(struct pci_dev *dev) -{ - u8 sec_busno; - struct pci_bus *child_bus; - - /* Get busno of downstream bus */ - pci_read_config_byte(dev, PCI_SECONDARY_BUS, &sec_busno); - - /* Add to children of PCI bridge dev->bus */ - child_bus = pci_add_new_bus(dev->bus, dev, sec_busno); - if (!child_bus) { - printk (KERN_ERR "%s: could not add second bus\n", __func__); - return -EIO; - } - sprintf(child_bus->name, "PCI Bus #%02x", child_bus->number); - - pci_scan_child_bus(child_bus); - - /* Fixup new pci devices */ - pcibios_fixup_new_pci_devices(child_bus); - - /* Make the discovered devices available */ - pci_bus_add_devices(child_bus); - - eeh_add_device_tree_late(child_bus); - return 0; -} - /** * pcibios_add_pci_devices - adds new pci devices to bus * @@ -147,10 +100,9 @@ pcibios_pci_config_bridge(struct pci_dev *dev) * is how this routine differs from other, similar pcibios * routines.) */ -void -pcibios_add_pci_devices(struct pci_bus * bus) +void pcibios_add_pci_devices(struct pci_bus * bus) { - int slotno, num, mode; + int slotno, num, mode, pass, max; struct pci_dev *dev; struct device_node *dn = pci_bus_to_OF_node(bus); @@ -162,26 +114,23 @@ pcibios_add_pci_devices(struct pci_bus * bus) if (mode == PCI_PROBE_DEVTREE) { /* use ofdt-based probe */ - of_scan_bus(dn, bus); - if (!list_empty(&bus->devices)) { - pcibios_fixup_new_pci_devices(bus); - pci_bus_add_devices(bus); - eeh_add_device_tree_late(bus); - } + of_rescan_bus(dn, bus); } else if (mode == PCI_PROBE_NORMAL) { /* use legacy probe */ slotno = PCI_SLOT(PCI_DN(dn->child)->devfn); num = pci_scan_slot(bus, PCI_DEVFN(slotno, 0)); - if (num) { - pcibios_fixup_new_pci_devices(bus); - pci_bus_add_devices(bus); - eeh_add_device_tree_late(bus); + if (!num) + return; + pcibios_setup_bus_devices(bus); + max = bus->secondary; + for (pass=0; pass < 2; pass++) + list_for_each_entry(dev, &bus->devices, bus_list) { + if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE || + dev->hdr_type == PCI_HEADER_TYPE_CARDBUS) + max = pci_scan_bridge(bus, dev, max, pass); } - - list_for_each_entry(dev, &bus->devices, bus_list) - if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE) - pcibios_pci_config_bridge(dev); } + pcibios_finish_adding_to_bus(bus); } EXPORT_SYMBOL_GPL(pcibios_add_pci_devices); @@ -190,6 +139,8 @@ struct pci_controller * __devinit init_phb_dynamic(struct device_node *dn) struct pci_controller *phb; int primary; + pr_debug("PCI: Initializing new hotplug PHB %s\n", dn->full_name); + primary = list_empty(&hose_list); phb = pcibios_alloc_controller(dn); if (!phb) @@ -203,11 +154,59 @@ struct pci_controller * __devinit init_phb_dynamic(struct device_node *dn) eeh_add_device_tree_early(dn); scan_phb(phb); - pcibios_allocate_bus_resources(phb->bus); - pcibios_fixup_new_pci_devices(phb->bus); - pci_bus_add_devices(phb->bus); - eeh_add_device_tree_late(phb->bus); + pcibios_finish_adding_to_bus(phb->bus); return phb; } EXPORT_SYMBOL_GPL(init_phb_dynamic); + +/* RPA-specific bits for removing PHBs */ +int remove_phb_dynamic(struct pci_controller *phb) +{ + struct pci_bus *b = phb->bus; + struct resource *res; + int rc, i; + + pr_debug("PCI: Removing PHB %04x:%02x... \n", + pci_domain_nr(b), b->number); + + /* We cannot to remove a root bus that has children */ + if (!(list_empty(&b->children) && list_empty(&b->devices))) + return -EBUSY; + + /* We -know- there aren't any child devices anymore at this stage + * and thus, we can safely unmap the IO space as it's not in use + */ + res = &phb->io_resource; + if (res->flags & IORESOURCE_IO) { + rc = pcibios_unmap_io_space(b); + if (rc) { + printk(KERN_ERR "%s: failed to unmap IO on bus %s\n", + __func__, b->name); + return 1; + } + } + + /* Unregister the bridge device from sysfs and remove the PCI bus */ + device_unregister(b->bridge); + phb->bus = NULL; + pci_remove_bus(b); + + /* Now release the IO resource */ + if (res->flags & IORESOURCE_IO) + release_resource(res); + + /* Release memory resources */ + for (i = 0; i < 3; ++i) { + res = &phb->mem_resources[i]; + if (!(res->flags & IORESOURCE_MEM)) + continue; + release_resource(res); + } + + /* Free pci_controller data structure */ + pcibios_free_controller(phb); + + return 0; +} +EXPORT_SYMBOL_GPL(remove_phb_dynamic); diff --git a/drivers/pci/hotplug/rpadlpar_core.c b/drivers/pci/hotplug/rpadlpar_core.c index 9c2a22f..4e3e038 100644 --- a/drivers/pci/hotplug/rpadlpar_core.c +++ b/drivers/pci/hotplug/rpadlpar_core.c @@ -14,6 +14,9 @@ * as published by the Free Software Foundation; either version * 2 of the License, or (at your option) any later version. */ + +#undef DEBUG + #include <linux/init.h> #include <linux/pci.h> #include <linux/string.h> @@ -151,20 +154,20 @@ static void dlpar_pci_add_bus(struct device_node *dn) return; } + /* Scan below the new bridge */ if (dev->hdr_type == PCI_HEADER_TYPE_BRIDGE || dev->hdr_type == PCI_HEADER_TYPE_CARDBUS) of_scan_pci_bridge(dn, dev); - pcibios_fixup_new_pci_devices(dev->subordinate); - - /* Claim new bus resources */ - pcibios_claim_one_bus(dev->bus); - /* Map IO space for child bus, which may or may not succeed */ pcibios_map_io_space(dev->subordinate); - /* Add new devices to global lists. Register in proc, sysfs. */ - pci_bus_add_devices(phb->bus); + /* Finish adding it : resource allocation, adding devices, etc... + * Note that we need to perform the finish pass on the -parent- + * bus of the EADS bridge so the bridge device itself gets + * properly added + */ + pcibios_finish_adding_to_bus(phb->bus); } static int dlpar_add_pci_slot(char *drc_name, struct device_node *dn) @@ -203,27 +206,6 @@ static int dlpar_add_pci_slot(char *drc_name, struct device_node *dn) return 0; } -static int dlpar_remove_root_bus(struct pci_controller *phb) -{ - struct pci_bus *phb_bus; - int rc; - - phb_bus = phb->bus; - if (!(list_empty(&phb_bus->children) && - list_empty(&phb_bus->devices))) { - return -EBUSY; - } - - rc = pcibios_remove_root_bus(phb); - if (rc) - return -EIO; - - device_unregister(phb_bus->bridge); - pci_remove_bus(phb_bus); - - return 0; -} - static int dlpar_remove_phb(char *drc_name, struct device_node *dn) { struct slot *slot; @@ -235,18 +217,15 @@ static int dlpar_remove_phb(char *drc_name, struct device_node *dn) /* If pci slot is hotplugable, use hotplug to remove it */ slot = find_php_slot(dn); - if (slot) { - if (rpaphp_deregister_slot(slot)) { - printk(KERN_ERR - "%s: unable to remove hotplug slot %s\n", - __func__, drc_name); - return -EIO; - } + if (slot && rpaphp_deregister_slot(slot)) { + printk(KERN_ERR "%s: unable to remove hotplug slot %s\n", + __func__, drc_name); + return -EIO; } pdn = dn->data; BUG_ON(!pdn || !pdn->phb); - rc = dlpar_remove_root_bus(pdn->phb); + rc = remove_phb_dynamic(pdn->phb); if (rc < 0) return rc; @@ -378,26 +357,38 @@ int dlpar_remove_pci_slot(char *drc_name, struct device_node *dn) if (!bus) return -EINVAL; - /* If pci slot is hotplugable, use hotplug to remove it */ + pr_debug("PCI: Removing PCI slot below EADS bridge %s\n", + bus->self ? pci_name(bus->self) : "<!PHB!>"); + slot = find_php_slot(dn); if (slot) { + pr_debug("PCI: Removing hotplug slot for %04x:%02x...\n", + pci_domain_nr(bus), bus->number); + if (rpaphp_deregister_slot(slot)) { printk(KERN_ERR "%s: unable to remove hotplug slot %s\n", __func__, drc_name); return -EIO; } - } else - pcibios_remove_pci_devices(bus); + } + + /* Remove all devices below slot */ + pcibios_remove_pci_devices(bus); + /* Unmap PCI IO space */ if (pcibios_unmap_io_space(bus)) { printk(KERN_ERR "%s: failed to unmap bus range\n", __func__); return -ERANGE; } + /* Remove the EADS bridge device itself */ BUG_ON(!bus->self); + pr_debug("PCI: Now removing bridge device %s\n", pci_name(bus->self)); + eeh_remove_bus_device(bus->self); pci_remove_bus_device(bus->self); + return 0; } |