diff options
| -rw-r--r-- | MAINTAINERS | 2 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/Kconfig | 13 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/Makefile | 1 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/board-igep0020.c | 683 |
4 files changed, 1 insertions, 698 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index 8a0cbf3..1f006f1 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -929,7 +929,7 @@ M: Javier Martinez Canillas <javier@dowhile0.org> L: linux-omap@vger.kernel.org L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained -F: arch/arm/mach-omap2/board-igep0020.c +F: arch/arm/boot/dts/omap3-igep* ARM/INCOME PXA270 SUPPORT M: Marek Vasut <marek.vasut@gmail.com> diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 7a020c5..68c9688 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -326,19 +326,6 @@ config MACH_CM_T3517 config MACH_CM_T3730 bool -config MACH_IGEP0020 - bool "IGEP v2 board" - depends on ARCH_OMAP3 - default y - select OMAP_PACKAGE_CBB - -config MACH_IGEP0030 - bool "IGEP OMAP3 module" - depends on ARCH_OMAP3 - default y - select MACH_IGEP0020 - select OMAP_PACKAGE_CBB - config MACH_SBC3530 bool "OMAP3 SBC STALKER board" depends on ARCH_OMAP3 diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 449a174..096d6bb 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -250,7 +250,6 @@ obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51-peripherals.o obj-$(CONFIG_MACH_NOKIA_RX51) += board-rx51-video.o obj-$(CONFIG_MACH_CM_T35) += board-cm-t35.o obj-$(CONFIG_MACH_CM_T3517) += board-cm-t3517.o -obj-$(CONFIG_MACH_IGEP0020) += board-igep0020.o obj-$(CONFIG_MACH_TOUCHBOOK) += board-omap3touchbook.o obj-$(CONFIG_MACH_OMAP3517EVM) += board-am3517evm.o diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c deleted file mode 100644 index d648d50..0000000 --- a/arch/arm/mach-omap2/board-igep0020.c +++ /dev/null @@ -1,683 +0,0 @@ -/* - * Copyright (C) 2009 Integration Software and Electronic Engineering. - * - * Modified from mach-omap2/board-generic.c - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/platform_device.h> -#include <linux/delay.h> -#include <linux/err.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/gpio.h> -#include <linux/interrupt.h> -#include <linux/input.h> -#include <linux/usb/phy.h> - -#include <linux/regulator/machine.h> -#include <linux/regulator/fixed.h> -#include <linux/i2c/twl.h> -#include <linux/mmc/host.h> - -#include <linux/mtd/nand.h> - -#include <asm/mach-types.h> -#include <asm/mach/arch.h> - -#include <video/omapdss.h> -#include <video/omap-panel-data.h> -#include <linux/platform_data/mtd-onenand-omap2.h> - -#include "common.h" -#include "gpmc.h" -#include "mux.h" -#include "hsmmc.h" -#include "sdram-numonyx-m65kxxxxam.h" -#include "common-board-devices.h" -#include "board-flash.h" -#include "control.h" -#include "gpmc-onenand.h" -#include "dss-common.h" - -#define IGEP2_SMSC911X_CS 5 -#define IGEP2_SMSC911X_GPIO 176 -#define IGEP2_GPIO_USBH_NRESET 24 -#define IGEP2_GPIO_LED0_GREEN 26 -#define IGEP2_GPIO_LED0_RED 27 -#define IGEP2_GPIO_LED1_RED 28 - -#define IGEP2_RB_GPIO_WIFI_NPD 94 -#define IGEP2_RB_GPIO_WIFI_NRESET 95 -#define IGEP2_RB_GPIO_BT_NRESET 137 -#define IGEP2_RC_GPIO_WIFI_NPD 138 -#define IGEP2_RC_GPIO_WIFI_NRESET 139 -#define IGEP2_RC_GPIO_BT_NRESET 137 - -#define IGEP3_GPIO_LED0_GREEN 54 -#define IGEP3_GPIO_LED0_RED 53 -#define IGEP3_GPIO_LED1_RED 16 -#define IGEP3_GPIO_USBH_NRESET 183 - -#define IGEP_SYSBOOT_MASK 0x1f -#define IGEP_SYSBOOT_NAND 0x0f -#define IGEP_SYSBOOT_ONENAND 0x10 - -/* - * IGEP2 Hardware Revision Table - * - * -------------------------------------------------------------------------- - * | Id. | Hw Rev. | HW0 (28) | WIFI_NPD | WIFI_NRESET | BT_NRESET | - * -------------------------------------------------------------------------- - * | 0 | B | high | gpio94 | gpio95 | - | - * | 0 | B/C (B-compatible) | high | gpio94 | gpio95 | gpio137 | - * | 1 | C | low | gpio138 | gpio139 | gpio137 | - * -------------------------------------------------------------------------- - */ - -#define IGEP2_BOARD_HWREV_B 0 -#define IGEP2_BOARD_HWREV_C 1 -#define IGEP3_BOARD_HWREV 2 - -static u8 hwrev; - -static void __init igep2_get_revision(void) -{ - u8 ret; - - if (machine_is_igep0030()) { - hwrev = IGEP3_BOARD_HWREV; - return; - } - - omap_mux_init_gpio(IGEP2_GPIO_LED1_RED, OMAP_PIN_INPUT); - - if (gpio_request_one(IGEP2_GPIO_LED1_RED, GPIOF_IN, "GPIO_HW0_REV")) { - pr_warning("IGEP2: Could not obtain gpio GPIO_HW0_REV\n"); - pr_err("IGEP2: Unknown Hardware Revision\n"); - return; - } - - ret = gpio_get_value(IGEP2_GPIO_LED1_RED); - if (ret == 0) { - pr_info("IGEP2: Hardware Revision C (B-NON compatible)\n"); - hwrev = IGEP2_BOARD_HWREV_C; - } else if (ret == 1) { - pr_info("IGEP2: Hardware Revision B/C (B compatible)\n"); - hwrev = IGEP2_BOARD_HWREV_B; - } else { - pr_err("IGEP2: Unknown Hardware Revision\n"); - hwrev = -1; - } - - gpio_free(IGEP2_GPIO_LED1_RED); -} - -#if defined(CONFIG_MTD_ONENAND_OMAP2) || \ - defined(CONFIG_MTD_ONENAND_OMAP2_MODULE) || \ - defined(CONFIG_MTD_NAND_OMAP2) || \ - defined(CONFIG_MTD_NAND_OMAP2_MODULE) - -#define ONENAND_MAP 0x20000000 - -/* NAND04GR4E1A ( x2 Flash built-in COMBO POP MEMORY ) - * Since the device is equipped with two DataRAMs, and two-plane NAND - * Flash memory array, these two component enables simultaneous program - * of 4KiB. Plane1 has only even blocks such as block0, block2, block4 - * while Plane2 has only odd blocks such as block1, block3, block5. - * So MTD regards it as 4KiB page size and 256KiB block size 64*(2*2048) - */ - -static struct mtd_partition igep_flash_partitions[] = { - { - .name = "X-Loader", - .offset = 0, - .size = 2 * (64*(2*2048)) - }, - { - .name = "U-Boot", - .offset = MTDPART_OFS_APPEND, - .size = 6 * (64*(2*2048)), - }, - { - .name = "Environment", - .offset = MTDPART_OFS_APPEND, - .size = 2 * (64*(2*2048)), - }, - { - .name = "Kernel", - .offset = MTDPART_OFS_APPEND, - .size = 12 * (64*(2*2048)), - }, - { - .name = "File System", - .offset = MTDPART_OFS_APPEND, - .size = MTDPART_SIZ_FULL, - }, -}; - -static inline u32 igep_get_sysboot_value(void) -{ - return omap_ctrl_readl(OMAP343X_CONTROL_STATUS) & IGEP_SYSBOOT_MASK; -} - -static void __init igep_flash_init(void) -{ - u32 mux; - mux = igep_get_sysboot_value(); - - if (mux == IGEP_SYSBOOT_NAND) { - pr_info("IGEP: initializing NAND memory device\n"); - board_nand_init(igep_flash_partitions, - ARRAY_SIZE(igep_flash_partitions), - 0, NAND_BUSWIDTH_16, nand_default_timings); - } else if (mux == IGEP_SYSBOOT_ONENAND) { - pr_info("IGEP: initializing OneNAND memory device\n"); - board_onenand_init(igep_flash_partitions, - ARRAY_SIZE(igep_flash_partitions), 0); - } else { - pr_err("IGEP: Flash: unsupported sysboot sequence found\n"); - } -} - -#else -static void __init igep_flash_init(void) {} -#endif - -#if defined(CONFIG_SMSC911X) || defined(CONFIG_SMSC911X_MODULE) - -#include <linux/smsc911x.h> -#include "gpmc-smsc911x.h" - -static struct omap_smsc911x_platform_data smsc911x_cfg = { - .cs = IGEP2_SMSC911X_CS, - .gpio_irq = IGEP2_SMSC911X_GPIO, - .gpio_reset = -EINVAL, - .flags = SMSC911X_USE_32BIT | SMSC911X_SAVE_MAC_ADDRESS, -}; - -static inline void __init igep2_init_smsc911x(void) -{ - gpmc_smsc911x_init(&smsc911x_cfg); -} - -#else -static inline void __init igep2_init_smsc911x(void) { } -#endif - -static struct regulator_consumer_supply igep_vmmc1_supply[] = { - REGULATOR_SUPPLY("vmmc", "omap_hsmmc.0"), -}; - -/* VMMC1 for OMAP VDD_MMC1 (i/o) and MMC1 card */ -static struct regulator_init_data igep_vmmc1 = { - .constraints = { - .min_uV = 1850000, - .max_uV = 3150000, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(igep_vmmc1_supply), - .consumer_supplies = igep_vmmc1_supply, -}; - -static struct regulator_consumer_supply igep_vio_supply[] = { - REGULATOR_SUPPLY("vmmc_aux", "omap_hsmmc.1"), -}; - -static struct regulator_init_data igep_vio = { - .constraints = { - .min_uV = 1800000, - .max_uV = 1800000, - .apply_uV = 1, - .valid_modes_mask = REGULATOR_MODE_NORMAL - | REGULATOR_MODE_STANDBY, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE - | REGULATOR_CHANGE_MODE - | REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(igep_vio_supply), - .consumer_supplies = igep_vio_supply, -}; - -static struct regulator_consumer_supply igep_vmmc2_supply[] = { - REGULATOR_SUPPLY("vmmc", "omap_hsmmc.1"), -}; - -static struct regulator_init_data igep_vmmc2 = { - .constraints = { - .valid_modes_mask = REGULATOR_MODE_NORMAL, - .always_on = 1, - }, - .num_consumer_supplies = ARRAY_SIZE(igep_vmmc2_supply), - .consumer_supplies = igep_vmmc2_supply, -}; - -static struct fixed_voltage_config igep_vwlan = { - .supply_name = "vwlan", - .microvolts = 3300000, - .gpio = -EINVAL, - .enabled_at_boot = 1, - .init_data = &igep_vmmc2, -}; - -static struct platform_device igep_vwlan_device = { - .name = "reg-fixed-voltage", - .id = 0, - .dev = { - .platform_data = &igep_vwlan, - }, -}; - -static struct omap2_hsmmc_info mmc[] = { - { - .mmc = 1, - .caps = MMC_CAP_4_BIT_DATA, - .gpio_cd = -EINVAL, - .gpio_wp = -EINVAL, - .deferred = true, - }, -#if defined(CONFIG_LIBERTAS_SDIO) || defined(CONFIG_LIBERTAS_SDIO_MODULE) - { - .mmc = 2, - .caps = MMC_CAP_4_BIT_DATA, - .gpio_cd = -EINVAL, - .gpio_wp = -EINVAL, - }, -#endif - {} /* Terminator */ -}; - -#if defined(CONFIG_LEDS_GPIO) || defined(CONFIG_LEDS_GPIO_MODULE) -#include <linux/leds.h> - -static struct gpio_led igep_gpio_leds[] = { - [0] = { - .name = "omap3:red:user0", - .default_state = 0, - }, - [1] = { - .name = "omap3:green:boot", - .default_state = 1, - }, - [2] = { - .name = "omap3:red:user1", - .default_state = 0, - }, - [3] = { - .name = "omap3:green:user1", - .default_state = 0, - .gpio = -EINVAL, /* gets replaced */ - .active_low = 1, - }, -}; - -static struct gpio_led_platform_data igep_led_pdata = { - .leds = igep_gpio_leds, - .num_leds = ARRAY_SIZE(igep_gpio_leds), -}; - -static struct platform_device igep_led_device = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &igep_led_pdata, - }, -}; - -static void __init igep_leds_init(void) -{ - if (machine_is_igep0020()) { - igep_gpio_leds[0].gpio = IGEP2_GPIO_LED0_RED; - igep_gpio_leds[1].gpio = IGEP2_GPIO_LED0_GREEN; - igep_gpio_leds[2].gpio = IGEP2_GPIO_LED1_RED; - } else { - igep_gpio_leds[0].gpio = IGEP3_GPIO_LED0_RED; - igep_gpio_leds[1].gpio = IGEP3_GPIO_LED0_GREEN; - igep_gpio_leds[2].gpio = IGEP3_GPIO_LED1_RED; - } - - platform_device_register(&igep_led_device); -} - -#else -static struct gpio igep_gpio_leds[] __initdata = { - { -EINVAL, GPIOF_OUT_INIT_LOW, "gpio-led:red:d0" }, - { -EINVAL, GPIOF_OUT_INIT_LOW, "gpio-led:green:d0" }, - { -EINVAL, GPIOF_OUT_INIT_LOW, "gpio-led:red:d1" }, -}; - -static inline void igep_leds_init(void) -{ - int i; - - if (machine_is_igep0020()) { - igep_gpio_leds[0].gpio = IGEP2_GPIO_LED0_RED; - igep_gpio_leds[1].gpio = IGEP2_GPIO_LED0_GREEN; - igep_gpio_leds[2].gpio = IGEP2_GPIO_LED1_RED; - } else { - igep_gpio_leds[0].gpio = IGEP3_GPIO_LED0_RED; - igep_gpio_leds[1].gpio = IGEP3_GPIO_LED0_GREEN; - igep_gpio_leds[2].gpio = IGEP3_GPIO_LED1_RED; - } - - if (gpio_request_array(igep_gpio_leds, ARRAY_SIZE(igep_gpio_leds))) { - pr_warning("IGEP v2: Could not obtain leds gpios\n"); - return; - } - - for (i = 0; i < ARRAY_SIZE(igep_gpio_leds); i++) - gpio_export(igep_gpio_leds[i].gpio, 0); -} -#endif - -static struct gpio igep2_twl_gpios[] = { - { -EINVAL, GPIOF_IN, "GPIO_EHCI_NOC" }, - { -EINVAL, GPIOF_OUT_INIT_LOW, "GPIO_USBH_CPEN" }, -}; - -static int igep_twl_gpio_setup(struct device *dev, - unsigned gpio, unsigned ngpio) -{ - int ret; - - /* gpio + 0 is "mmc0_cd" (input/IRQ) */ - mmc[0].gpio_cd = gpio + 0; - omap_hsmmc_late_init(mmc); - - /* TWL4030_GPIO_MAX + 1 == ledB (out, active low LED) */ -#if !defined(CONFIG_LEDS_GPIO) && !defined(CONFIG_LEDS_GPIO_MODULE) - ret = gpio_request_one(gpio + TWL4030_GPIO_MAX + 1, GPIOF_OUT_INIT_HIGH, - "gpio-led:green:d1"); - if (ret == 0) - gpio_export(gpio + TWL4030_GPIO_MAX + 1, 0); - else - pr_warning("IGEP: Could not obtain gpio GPIO_LED1_GREEN\n"); -#else - igep_gpio_leds[3].gpio = gpio + TWL4030_GPIO_MAX + 1; -#endif - - if (machine_is_igep0030()) - return 0; - - /* - * REVISIT: need ehci-omap hooks for external VBUS - * power switch and overcurrent detect - */ - igep2_twl_gpios[0].gpio = gpio + 1; - - /* TWL4030_GPIO_MAX + 0 == ledA, GPIO_USBH_CPEN (out, active low) */ - igep2_twl_gpios[1].gpio = gpio + TWL4030_GPIO_MAX; - - ret = gpio_request_array(igep2_twl_gpios, ARRAY_SIZE(igep2_twl_gpios)); - if (ret < 0) - pr_err("IGEP2: Could not obtain gpio for USBH_CPEN"); - - return 0; -}; - -static struct twl4030_gpio_platform_data igep_twl4030_gpio_pdata = { - .use_leds = true, - .setup = igep_twl_gpio_setup, -}; - -static int igep2_keymap[] = { - KEY(0, 0, KEY_LEFT), - KEY(0, 1, KEY_RIGHT), - KEY(0, 2, KEY_A), - KEY(0, 3, KEY_B), - KEY(1, 0, KEY_DOWN), - KEY(1, 1, KEY_UP), - KEY(1, 2, KEY_E), - KEY(1, 3, KEY_F), - KEY(2, 0, KEY_ENTER), - KEY(2, 1, KEY_I), - KEY(2, 2, KEY_J), - KEY(2, 3, KEY_K), - KEY(3, 0, KEY_M), - KEY(3, 1, KEY_N), - KEY(3, 2, KEY_O), - KEY(3, 3, KEY_P) -}; - -static struct matrix_keymap_data igep2_keymap_data = { - .keymap = igep2_keymap, - .keymap_size = ARRAY_SIZE(igep2_keymap), -}; - -static struct twl4030_keypad_data igep2_keypad_pdata = { - .keymap_data = &igep2_keymap_data, - .rows = 4, - .cols = 4, - .rep = 1, -}; - -static struct twl4030_platform_data igep_twldata = { - /* platform_data for children goes here */ - .gpio = &igep_twl4030_gpio_pdata, - .vmmc1 = &igep_vmmc1, - .vio = &igep_vio, -}; - -static struct i2c_board_info __initdata igep2_i2c3_boardinfo[] = { - { - I2C_BOARD_INFO("eeprom", 0x50), - }, -}; - -static void __init igep_i2c_init(void) -{ - int ret; - - omap3_pmic_get_config(&igep_twldata, TWL_COMMON_PDATA_USB, - TWL_COMMON_REGULATOR_VPLL2); - igep_twldata.vpll2->constraints.apply_uV = true; - igep_twldata.vpll2->constraints.name = "VDVI"; - - if (machine_is_igep0020()) { - /* - * Bus 3 is attached to the DVI port where devices like the - * pico DLP projector don't work reliably with 400kHz - */ - ret = omap_register_i2c_bus(3, 100, igep2_i2c3_boardinfo, - ARRAY_SIZE(igep2_i2c3_boardinfo)); - if (ret) - pr_warning("IGEP2: Could not register I2C3 bus (%d)\n", ret); - - igep_twldata.keypad = &igep2_keypad_pdata; - /* Get common pmic data */ - omap3_pmic_get_config(&igep_twldata, TWL_COMMON_PDATA_AUDIO, 0); - } - - omap3_pmic_init("twl4030", &igep_twldata); -} - -static struct usbhs_phy_data igep2_phy_data[] __initdata = { - { - .port = 1, - .reset_gpio = IGEP2_GPIO_USBH_NRESET, - .vcc_gpio = -EINVAL, - }, -}; - -static struct usbhs_phy_data igep3_phy_data[] __initdata = { - { - .port = 2, - .reset_gpio = IGEP3_GPIO_USBH_NRESET, - .vcc_gpio = -EINVAL, - }, -}; - -static struct usbhs_omap_platform_data igep2_usbhs_bdata __initdata = { - .port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, -}; - -static struct usbhs_omap_platform_data igep3_usbhs_bdata __initdata = { - .port_mode[1] = OMAP_EHCI_PORT_MODE_PHY, -}; - -#ifdef CONFIG_OMAP_MUX -static struct omap_board_mux board_mux[] __initdata = { - /* Display Sub System */ - OMAP3_MUX(DSS_PCLK, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_HSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_VSYNC, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_ACBIAS, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA0, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA1, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA2, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA3, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA4, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA5, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA6, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA7, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA8, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA9, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA10, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA11, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA12, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA13, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA14, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA15, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA16, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA17, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA18, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA19, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA20, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA21, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA22, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - OMAP3_MUX(DSS_DATA23, OMAP_MUX_MODE0 | OMAP_PIN_OUTPUT), - /* TFP410 PanelBus DVI Transmitte (GPIO_170) */ - OMAP3_MUX(HDQ_SIO, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT), - /* SMSC9221 LAN Controller ETH IRQ (GPIO_176) */ - OMAP3_MUX(MCSPI1_CS2, OMAP_MUX_MODE4 | OMAP_PIN_INPUT), - { .reg_offset = OMAP_MUX_TERMINATOR }, -}; -#endif - -#if defined(CONFIG_LIBERTAS_SDIO) || defined(CONFIG_LIBERTAS_SDIO_MODULE) -static struct gpio igep_wlan_bt_gpios[] __initdata = { - { -EINVAL, GPIOF_OUT_INIT_HIGH, "GPIO_WIFI_NPD" }, - { -EINVAL, GPIOF_OUT_INIT_HIGH, "GPIO_WIFI_NRESET" }, - { -EINVAL, GPIOF_OUT_INIT_HIGH, "GPIO_BT_NRESET" }, -}; - -static void __init igep_wlan_bt_init(void) -{ - int err; - - /* GPIO's for WLAN-BT combo depends on hardware revision */ - if (hwrev == IGEP2_BOARD_HWREV_B) { - igep_wlan_bt_gpios[0].gpio = IGEP2_RB_GPIO_WIFI_NPD; - igep_wlan_bt_gpios[1].gpio = IGEP2_RB_GPIO_WIFI_NRESET; - igep_wlan_bt_gpios[2].gpio = IGEP2_RB_GPIO_BT_NRESET; - } else if (hwrev == IGEP2_BOARD_HWREV_C || machine_is_igep0030()) { - igep_wlan_bt_gpios[0].gpio = IGEP2_RC_GPIO_WIFI_NPD; - igep_wlan_bt_gpios[1].gpio = IGEP2_RC_GPIO_WIFI_NRESET; - igep_wlan_bt_gpios[2].gpio = IGEP2_RC_GPIO_BT_NRESET; - } else - return; - - /* Make sure that the GPIO pins are muxed correctly */ - omap_mux_init_gpio(igep_wlan_bt_gpios[0].gpio, OMAP_PIN_OUTPUT); - omap_mux_init_gpio(igep_wlan_bt_gpios[1].gpio, OMAP_PIN_OUTPUT); - omap_mux_init_gpio(igep_wlan_bt_gpios[2].gpio, OMAP_PIN_OUTPUT); - - err = gpio_request_array(igep_wlan_bt_gpios, - ARRAY_SIZE(igep_wlan_bt_gpios)); - if (err) { - pr_warning("IGEP2: Could not obtain WIFI/BT gpios\n"); - return; - } - - gpio_export(igep_wlan_bt_gpios[0].gpio, 0); - gpio_export(igep_wlan_bt_gpios[1].gpio, 0); - gpio_export(igep_wlan_bt_gpios[2].gpio, 0); - - gpio_set_value(igep_wlan_bt_gpios[1].gpio, 0); - udelay(10); - gpio_set_value(igep_wlan_bt_gpios[1].gpio, 1); - -} -#else -static inline void __init igep_wlan_bt_init(void) { } -#endif - -static struct regulator_consumer_supply dummy_supplies[] = { - REGULATOR_SUPPLY("vddvario", "smsc911x.0"), - REGULATOR_SUPPLY("vdd33a", "smsc911x.0"), -}; - -static void __init igep_init(void) -{ - regulator_register_fixed(1, dummy_supplies, ARRAY_SIZE(dummy_supplies)); - omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); - - /* Get IGEP2 hardware revision */ - igep2_get_revision(); - - omap_hsmmc_init(mmc); - - /* Register I2C busses and drivers */ - igep_i2c_init(); - platform_device_register(&igep_vwlan_device); - omap3_igep2_display_init_of(); - omap_serial_init(); - omap_sdrc_init(m65kxxxxam_sdrc_params, - m65kxxxxam_sdrc_params); - usb_bind_phy("musb-hdrc.0.auto", 0, "twl4030_usb"); - usb_musb_init(NULL); - - igep_flash_init(); - igep_leds_init(); - omap_twl4030_audio_init("igep2", NULL); - - /* - * WLAN-BT combo module from MuRata which has a Marvell WLAN - * (88W8686) + CSR Bluetooth chipset. Uses SDIO interface. - */ - igep_wlan_bt_init(); - - if (machine_is_igep0020()) { - igep2_init_smsc911x(); - usbhs_init_phys(igep2_phy_data, ARRAY_SIZE(igep2_phy_data)); - usbhs_init(&igep2_usbhs_bdata); - } else { - usbhs_init_phys(igep3_phy_data, ARRAY_SIZE(igep3_phy_data)); - usbhs_init(&igep3_usbhs_bdata); - } -} - -MACHINE_START(IGEP0020, "IGEP v2 board") - .atag_offset = 0x100, - .reserve = omap_reserve, - .map_io = omap3_map_io, - .init_early = omap35xx_init_early, - .init_irq = omap3_init_irq, - .handle_irq = omap3_intc_handle_irq, - .init_machine = igep_init, - .init_late = omap35xx_init_late, - .init_time = omap3_sync32k_timer_init, - .restart = omap3xxx_restart, -MACHINE_END - -MACHINE_START(IGEP0030, "IGEP OMAP3 module") - .atag_offset = 0x100, - .reserve = omap_reserve, - .map_io = omap3_map_io, - .init_early = omap35xx_init_early, - .init_irq = omap3_init_irq, - .handle_irq = omap3_intc_handle_irq, - .init_machine = igep_init, - .init_late = omap35xx_init_late, - .init_time = omap3_sync32k_timer_init, - .restart = omap3xxx_restart, -MACHINE_END |