diff options
-rw-r--r-- | drivers/usb/host/isp1760-hcd.c | 136 |
1 files changed, 68 insertions, 68 deletions
diff --git a/drivers/usb/host/isp1760-hcd.c b/drivers/usb/host/isp1760-hcd.c index a46ccf9..e399e23 100644 --- a/drivers/usb/host/isp1760-hcd.c +++ b/drivers/usb/host/isp1760-hcd.c @@ -514,74 +514,6 @@ static int isp1760_hc_setup(struct usb_hcd *hcd) return priv_init(hcd); } -static int isp1760_run(struct usb_hcd *hcd) -{ - int retval; - u32 temp; - u32 command; - u32 chipid; - - hcd->uses_new_polling = 1; - - hcd->state = HC_STATE_RUNNING; - - /* Set PTD interrupt AND & OR maps */ - reg_write32(hcd->regs, HC_ATL_IRQ_MASK_AND_REG, 0); - reg_write32(hcd->regs, HC_ATL_IRQ_MASK_OR_REG, 0xffffffff); - reg_write32(hcd->regs, HC_INT_IRQ_MASK_AND_REG, 0); - reg_write32(hcd->regs, HC_INT_IRQ_MASK_OR_REG, 0xffffffff); - reg_write32(hcd->regs, HC_ISO_IRQ_MASK_AND_REG, 0); - reg_write32(hcd->regs, HC_ISO_IRQ_MASK_OR_REG, 0xffffffff); - /* step 23 passed */ - - temp = reg_read32(hcd->regs, HC_HW_MODE_CTRL); - reg_write32(hcd->regs, HC_HW_MODE_CTRL, temp | HW_GLOBAL_INTR_EN); - - command = reg_read32(hcd->regs, HC_USBCMD); - command &= ~(CMD_LRESET|CMD_RESET); - command |= CMD_RUN; - reg_write32(hcd->regs, HC_USBCMD, command); - - retval = handshake(hcd, HC_USBCMD, CMD_RUN, CMD_RUN, 250 * 1000); - if (retval) - return retval; - - /* - * XXX - * Spec says to write FLAG_CF as last config action, priv code grabs - * the semaphore while doing so. - */ - down_write(&ehci_cf_port_reset_rwsem); - reg_write32(hcd->regs, HC_CONFIGFLAG, FLAG_CF); - - retval = handshake(hcd, HC_CONFIGFLAG, FLAG_CF, FLAG_CF, 250 * 1000); - up_write(&ehci_cf_port_reset_rwsem); - if (retval) - return retval; - - chipid = reg_read32(hcd->regs, HC_CHIP_ID_REG); - dev_info(hcd->self.controller, "USB ISP %04x HW rev. %d started\n", - chipid & 0xffff, chipid >> 16); - - /* PTD Register Init Part 2, Step 28 */ - - /* Setup registers controlling PTD checking */ - reg_write32(hcd->regs, HC_ATL_PTD_LASTPTD_REG, 0x80000000); - reg_write32(hcd->regs, HC_INT_PTD_LASTPTD_REG, 0x80000000); - reg_write32(hcd->regs, HC_ISO_PTD_LASTPTD_REG, 0x00000001); - reg_write32(hcd->regs, HC_ATL_PTD_SKIPMAP_REG, 0xffffffff); - reg_write32(hcd->regs, HC_INT_PTD_SKIPMAP_REG, 0xffffffff); - reg_write32(hcd->regs, HC_ISO_PTD_SKIPMAP_REG, 0xffffffff); - reg_write32(hcd->regs, HC_BUFFER_STATUS_REG, - ATL_BUF_FILL | INT_BUF_FILL); - - /* GRR this is run-once init(), being done every time the HC starts. - * So long as they're part of class devices, we can't do it init() - * since the class device isn't created that early. - */ - return 0; -} - static u32 base_to_chip(u32 base) { return ((base - 0x400) >> 3); @@ -1326,6 +1258,74 @@ leave: return irqret; } +static int isp1760_run(struct usb_hcd *hcd) +{ + int retval; + u32 temp; + u32 command; + u32 chipid; + + hcd->uses_new_polling = 1; + + hcd->state = HC_STATE_RUNNING; + + /* Set PTD interrupt AND & OR maps */ + reg_write32(hcd->regs, HC_ATL_IRQ_MASK_AND_REG, 0); + reg_write32(hcd->regs, HC_ATL_IRQ_MASK_OR_REG, 0xffffffff); + reg_write32(hcd->regs, HC_INT_IRQ_MASK_AND_REG, 0); + reg_write32(hcd->regs, HC_INT_IRQ_MASK_OR_REG, 0xffffffff); + reg_write32(hcd->regs, HC_ISO_IRQ_MASK_AND_REG, 0); + reg_write32(hcd->regs, HC_ISO_IRQ_MASK_OR_REG, 0xffffffff); + /* step 23 passed */ + + temp = reg_read32(hcd->regs, HC_HW_MODE_CTRL); + reg_write32(hcd->regs, HC_HW_MODE_CTRL, temp | HW_GLOBAL_INTR_EN); + + command = reg_read32(hcd->regs, HC_USBCMD); + command &= ~(CMD_LRESET|CMD_RESET); + command |= CMD_RUN; + reg_write32(hcd->regs, HC_USBCMD, command); + + retval = handshake(hcd, HC_USBCMD, CMD_RUN, CMD_RUN, 250 * 1000); + if (retval) + return retval; + + /* + * XXX + * Spec says to write FLAG_CF as last config action, priv code grabs + * the semaphore while doing so. + */ + down_write(&ehci_cf_port_reset_rwsem); + reg_write32(hcd->regs, HC_CONFIGFLAG, FLAG_CF); + + retval = handshake(hcd, HC_CONFIGFLAG, FLAG_CF, FLAG_CF, 250 * 1000); + up_write(&ehci_cf_port_reset_rwsem); + if (retval) + return retval; + + chipid = reg_read32(hcd->regs, HC_CHIP_ID_REG); + dev_info(hcd->self.controller, "USB ISP %04x HW rev. %d started\n", + chipid & 0xffff, chipid >> 16); + + /* PTD Register Init Part 2, Step 28 */ + + /* Setup registers controlling PTD checking */ + reg_write32(hcd->regs, HC_ATL_PTD_LASTPTD_REG, 0x80000000); + reg_write32(hcd->regs, HC_INT_PTD_LASTPTD_REG, 0x80000000); + reg_write32(hcd->regs, HC_ISO_PTD_LASTPTD_REG, 0x00000001); + reg_write32(hcd->regs, HC_ATL_PTD_SKIPMAP_REG, 0xffffffff); + reg_write32(hcd->regs, HC_INT_PTD_SKIPMAP_REG, 0xffffffff); + reg_write32(hcd->regs, HC_ISO_PTD_SKIPMAP_REG, 0xffffffff); + reg_write32(hcd->regs, HC_BUFFER_STATUS_REG, + ATL_BUF_FILL | INT_BUF_FILL); + + /* GRR this is run-once init(), being done every time the HC starts. + * So long as they're part of class devices, we can't do it init() + * since the class device isn't created that early. + */ + return 0; +} + static int qtd_fill(struct isp1760_qtd *qtd, void *databuffer, size_t len) { qtd->data_buffer = databuffer; |