diff options
-rw-r--r-- | MAINTAINERS | 1 | ||||
-rw-r--r-- | arch/arm/boot/dts/ste-snowball.dts | 15 | ||||
-rw-r--r-- | arch/arm/configs/multi_v7_defconfig | 1 | ||||
-rw-r--r-- | arch/arm/mach-mvebu/Kconfig | 4 | ||||
-rw-r--r-- | arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi | 2 | ||||
-rw-r--r-- | drivers/bus/Kconfig | 1 |
6 files changed, 18 insertions, 6 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index 1cd38a7..25f543c 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1442,6 +1442,7 @@ F: drivers/cpufreq/mvebu-cpufreq.c F: arch/arm/configs/mvebu_*_defconfig ARM/Marvell Berlin SoC support +M: Jisheng Zhang <jszhang@marvell.com> M: Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts index b3df1c6..386eee6 100644 --- a/arch/arm/boot/dts/ste-snowball.dts +++ b/arch/arm/boot/dts/ste-snowball.dts @@ -239,14 +239,25 @@ arm,primecell-periphid = <0x10480180>; max-frequency = <100000000>; bus-width = <4>; + cap-sd-highspeed; cap-mmc-highspeed; + sd-uhs-sdr12; + sd-uhs-sdr25; + /* All direction control is used */ + st,sig-dir-cmd; + st,sig-dir-dat0; + st,sig-dir-dat2; + st,sig-dir-dat31; + st,sig-pin-fbclk; + full-pwr-cycle; vmmc-supply = <&ab8500_ldo_aux3_reg>; vqmmc-supply = <&vmmci>; pinctrl-names = "default", "sleep"; pinctrl-0 = <&sdi0_default_mode>; pinctrl-1 = <&sdi0_sleep_mode>; - cd-gpios = <&gpio6 26 GPIO_ACTIVE_LOW>; // 218 + /* GPIO218 MMC_CD */ + cd-gpios = <&gpio6 26 GPIO_ACTIVE_LOW>; status = "okay"; }; @@ -549,7 +560,7 @@ /* VMMCI level-shifter enable */ snowball_cfg3 { pins = "GPIO217_AH12"; - ste,config = <&gpio_out_lo>; + ste,config = <&gpio_out_hi>; }; /* VMMCI level-shifter voltage select */ snowball_cfg4 { diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index 437d074..11f37ed 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -850,6 +850,7 @@ CONFIG_PWM_SUN4I=y CONFIG_PWM_TEGRA=y CONFIG_PWM_VT8500=y CONFIG_PHY_HIX5HD2_SATA=y +CONFIG_E1000E=y CONFIG_PWM_STI=y CONFIG_PWM_BCM2835=y CONFIG_PWM_BRCMSTB=m diff --git a/arch/arm/mach-mvebu/Kconfig b/arch/arm/mach-mvebu/Kconfig index f9b6bd3..541647f 100644 --- a/arch/arm/mach-mvebu/Kconfig +++ b/arch/arm/mach-mvebu/Kconfig @@ -23,6 +23,7 @@ config MACH_MVEBU_V7 select CACHE_L2X0 select ARM_CPU_SUSPEND select MACH_MVEBU_ANY + select MVEBU_CLK_COREDIV config MACH_ARMADA_370 bool "Marvell Armada 370 boards" @@ -32,7 +33,6 @@ config MACH_ARMADA_370 select CPU_PJ4B select MACH_MVEBU_V7 select PINCTRL_ARMADA_370 - select MVEBU_CLK_COREDIV help Say 'Y' here if you want your kernel to support boards based on the Marvell Armada 370 SoC with device tree. @@ -50,7 +50,6 @@ config MACH_ARMADA_375 select HAVE_SMP select MACH_MVEBU_V7 select PINCTRL_ARMADA_375 - select MVEBU_CLK_COREDIV help Say 'Y' here if you want your kernel to support boards based on the Marvell Armada 375 SoC with device tree. @@ -68,7 +67,6 @@ config MACH_ARMADA_38X select HAVE_SMP select MACH_MVEBU_V7 select PINCTRL_ARMADA_38X - select MVEBU_CLK_COREDIV help Say 'Y' here if you want your kernel to support boards based on the Marvell Armada 380/385 SoC with device tree. diff --git a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi index e5e3ed6..602e2c2 100644 --- a/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi @@ -131,7 +131,7 @@ #address-cells = <0x1>; #size-cells = <0x0>; cell-index = <1>; - clocks = <&cpm_syscon0 0 3>; + clocks = <&cpm_syscon0 1 21>; status = "disabled"; }; diff --git a/drivers/bus/Kconfig b/drivers/bus/Kconfig index 7010dca..7875105 100644 --- a/drivers/bus/Kconfig +++ b/drivers/bus/Kconfig @@ -111,6 +111,7 @@ config OMAP_OCP2SCP config QCOM_EBI2 bool "Qualcomm External Bus Interface 2 (EBI2)" depends on HAS_IOMEM + depends on ARCH_QCOM || COMPILE_TEST help Say y here to enable support for the Qualcomm External Bus Interface 2, which can be used to connect things like NAND Flash, |