diff options
-rw-r--r-- | drivers/ata/ahci_xgene.c | 60 |
1 files changed, 47 insertions, 13 deletions
diff --git a/drivers/ata/ahci_xgene.c b/drivers/ata/ahci_xgene.c index 042a9bb..ee3a365 100644 --- a/drivers/ata/ahci_xgene.c +++ b/drivers/ata/ahci_xgene.c @@ -78,6 +78,7 @@ struct xgene_ahci_context { struct ahci_host_priv *hpriv; struct device *dev; + u8 last_cmd[MAX_AHCI_CHN_PERCTR]; /* tracking the last command issued*/ void __iomem *csr_core; /* Core CSR address of IP */ void __iomem *csr_diag; /* Diag CSR address of IP */ void __iomem *csr_axi; /* AXI CSR address of IP */ @@ -98,20 +99,62 @@ static int xgene_ahci_init_memram(struct xgene_ahci_context *ctx) } /** + * xgene_ahci_restart_engine - Restart the dma engine. + * @ap : ATA port of interest + * + * Restarts the dma engine inside the controller. + */ +static int xgene_ahci_restart_engine(struct ata_port *ap) +{ + struct ahci_host_priv *hpriv = ap->host->private_data; + + ahci_stop_engine(ap); + ahci_start_fis_rx(ap); + hpriv->start_engine(ap); + + return 0; +} + +/** + * xgene_ahci_qc_issue - Issue commands to the device + * @qc: Command to issue + * + * Due to Hardware errata for IDENTIFY DEVICE command, the controller cannot + * clear the BSY bit after receiving the PIO setup FIS. This results in the dma + * state machine goes into the CMFatalErrorUpdate state and locks up. By + * restarting the dma engine, it removes the controller out of lock up state. + */ +static unsigned int xgene_ahci_qc_issue(struct ata_queued_cmd *qc) +{ + struct ata_port *ap = qc->ap; + struct ahci_host_priv *hpriv = ap->host->private_data; + struct xgene_ahci_context *ctx = hpriv->plat_data; + int rc = 0; + + if (unlikely(ctx->last_cmd[ap->port_no] == ATA_CMD_ID_ATA)) + xgene_ahci_restart_engine(ap); + + rc = ahci_qc_issue(qc); + + /* Save the last command issued */ + ctx->last_cmd[ap->port_no] = qc->tf.command; + + return rc; +} + +/** * xgene_ahci_read_id - Read ID data from the specified device * @dev: device * @tf: proposed taskfile * @id: data buffer * * This custom read ID function is required due to the fact that the HW - * does not support DEVSLP and the controller state machine may get stuck - * after processing the ID query command. + * does not support DEVSLP. */ static unsigned int xgene_ahci_read_id(struct ata_device *dev, struct ata_taskfile *tf, u16 *id) { u32 err_mask; - void __iomem *port_mmio = ahci_port_base(dev->link->ap); err_mask = ata_do_dev_read_id(dev, tf, id); if (err_mask) @@ -133,16 +176,6 @@ static unsigned int xgene_ahci_read_id(struct ata_device *dev, */ id[ATA_ID_FEATURE_SUPP] &= ~(1 << 8); - /* - * Due to HW errata, restart the port if no other command active. - * Otherwise the controller may get stuck. - */ - if (!readl(port_mmio + PORT_CMD_ISSUE)) { - writel(PORT_CMD_FIS_RX, port_mmio + PORT_CMD); - readl(port_mmio + PORT_CMD); /* Force a barrier */ - writel(PORT_CMD_FIS_RX | PORT_CMD_START, port_mmio + PORT_CMD); - readl(port_mmio + PORT_CMD); /* Force a barrier */ - } return 0; } @@ -300,6 +333,7 @@ static struct ata_port_operations xgene_ahci_ops = { .host_stop = xgene_ahci_host_stop, .hardreset = xgene_ahci_hardreset, .read_id = xgene_ahci_read_id, + .qc_issue = xgene_ahci_qc_issue, }; static const struct ata_port_info xgene_ahci_port_info = { |