diff options
260 files changed, 2203 insertions, 2660 deletions
diff --git a/Documentation/devicetree/bindings/thermal/rcar-thermal.txt b/Documentation/devicetree/bindings/thermal/rcar-thermal.txt index 0ef00be..43404b1 100644 --- a/Documentation/devicetree/bindings/thermal/rcar-thermal.txt +++ b/Documentation/devicetree/bindings/thermal/rcar-thermal.txt @@ -7,7 +7,10 @@ Required properties: - "renesas,thermal-r8a73a4" (R-Mobile AP6) - "renesas,thermal-r8a7779" (R-Car H1) - "renesas,thermal-r8a7790" (R-Car H2) - - "renesas,thermal-r8a7791" (R-Car M2) + - "renesas,thermal-r8a7791" (R-Car M2-W) + - "renesas,thermal-r8a7792" (R-Car V2H) + - "renesas,thermal-r8a7793" (R-Car M2-N) + - "renesas,thermal-r8a7794" (R-Car E2) - reg : Address range of the thermal registers. The 1st reg will be recognized as common register if it has "interrupts". diff --git a/Documentation/devicetree/bindings/usb/usb-ohci.txt b/Documentation/devicetree/bindings/usb/usb-ohci.txt index b968a1a..19233b7 100644 --- a/Documentation/devicetree/bindings/usb/usb-ohci.txt +++ b/Documentation/devicetree/bindings/usb/usb-ohci.txt @@ -9,6 +9,8 @@ Optional properties: - big-endian-regs : boolean, set this for hcds with big-endian registers - big-endian-desc : boolean, set this for hcds with big-endian descriptors - big-endian : boolean, for hcds with big-endian-regs + big-endian-desc +- no-big-frame-no : boolean, set if frame_no lives in bits [15:0] of HCCA +- num-ports : u32, to override the detected port count - clocks : a list of phandle + clock specifier pairs - phys : phandle + phy specifier pair - phy-names : "usb" diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 4c81a86..479f332 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -3621,7 +3621,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted. usb-storage.delay_use= [UMS] The delay in seconds before a new device is - scanned for Logical Units (default 5). + scanned for Logical Units (default 1). usb-storage.quirks= [UMS] A list of quirks entries to supplement or diff --git a/Documentation/video4linux/vivid.txt b/Documentation/video4linux/vivid.txt index eeb11a2..e5a940e 100644 --- a/Documentation/video4linux/vivid.txt +++ b/Documentation/video4linux/vivid.txt @@ -221,12 +221,11 @@ ccs_out_mode: specify the allowed video output crop/compose/scaling combination key, not quality. multiplanar: select whether each device instance supports multi-planar formats, - and thus the V4L2 multi-planar API. By default the first device instance - is single-planar, the second multi-planar, and it keeps alternating. + and thus the V4L2 multi-planar API. By default device instances are + single-planar. This module option can override that for each instance. Values are: - 0: use alternating single and multi-planar devices. 1: this is a single-planar instance. 2: this is a multi-planar instance. @@ -975,9 +974,8 @@ is set, then the alpha component is only used for the color red and set to 0 otherwise. The driver has to be configured to support the multiplanar formats. By default -the first driver instance is single-planar, the second is multi-planar, and it -keeps alternating. This can be changed by setting the multiplanar module option, -see section 1 for more details on that option. +the driver instances are single-planar. This can be changed by setting the +multiplanar module option, see section 1 for more details on that option. If the driver instance is using the multiplanar formats/API, then the first single planar format (YUYV) and the multiplanar NV16M and NV61M formats the @@ -1021,7 +1019,7 @@ the output overlay for the video output, turn on video looping and capture to see the blended framebuffer overlay that's being written to by the second instance. This setup would require the following commands: - $ sudo modprobe vivid n_devs=2 node_types=0x10101,0x1 multiplanar=1,1 + $ sudo modprobe vivid n_devs=2 node_types=0x10101,0x1 $ v4l2-ctl -d1 --find-fb /dev/fb1 is the framebuffer associated with base address 0x12800000 $ sudo v4l2-ctl -d2 --set-fbuf fb=1 diff --git a/MAINTAINERS b/MAINTAINERS index 3c64271..ea4d005 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1543,6 +1543,7 @@ F: arch/arm/mach-pxa/include/mach/z2.h ARM/ZYNQ ARCHITECTURE M: Michal Simek <michal.simek@xilinx.com> +R: Sören Brinkmann <soren.brinkmann@xilinx.com> L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) W: http://wiki.xilinx.com T: git git://git.xilinx.com/linux-xlnx.git @@ -2071,8 +2072,9 @@ F: drivers/clocksource/bcm_kona_timer.c BROADCOM BCM2835 ARM ARCHITECTURE M: Stephen Warren <swarren@wwwdotorg.org> +M: Lee Jones <lee@kernel.org> L: linux-rpi-kernel@lists.infradead.org (moderated for non-subscribers) -T: git git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-rpi.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/rpi/linux-rpi.git S: Maintained N: bcm2835 @@ -7179,6 +7181,7 @@ F: drivers/crypto/picoxcell* PIN CONTROL SUBSYSTEM M: Linus Walleij <linus.walleij@linaro.org> +L: linux-gpio@vger.kernel.org S: Maintained F: drivers/pinctrl/ F: include/linux/pinctrl/ @@ -8483,7 +8486,6 @@ F: arch/arm/mach-s3c24xx/bast-irq.c TI DAVINCI MACHINE SUPPORT M: Sekhar Nori <nsekhar@ti.com> M: Kevin Hilman <khilman@deeprootsystems.com> -L: davinci-linux-open-source@linux.davincidsp.com (moderated for non-subscribers) T: git git://gitorious.org/linux-davinci/linux-davinci.git Q: http://patchwork.kernel.org/project/linux-davinci/list/ S: Supported @@ -8493,7 +8495,6 @@ F: drivers/i2c/busses/i2c-davinci.c TI DAVINCI SERIES MEDIA DRIVER M: Lad, Prabhakar <prabhakar.csengg@gmail.com> L: linux-media@vger.kernel.org -L: davinci-linux-open-source@linux.davincidsp.com (moderated for non-subscribers) W: http://linuxtv.org/ Q: http://patchwork.linuxtv.org/project/linux-media/list/ T: git git://linuxtv.org/mhadli/v4l-dvb-davinci_devices.git @@ -9703,11 +9704,6 @@ S: Maintained F: Documentation/hid/hiddev.txt F: drivers/hid/usbhid/ -USB/IP DRIVERS -L: linux-usb@vger.kernel.org -S: Orphan -F: drivers/staging/usbip/ - USB ISP116X DRIVER M: Olav Kongas <ok@artecdesign.ee> L: linux-usb@vger.kernel.org @@ -1,7 +1,7 @@ VERSION = 3 PATCHLEVEL = 18 SUBLEVEL = 0 -EXTRAVERSION = -rc3 +EXTRAVERSION = -rc4 NAME = Diseased Newt # *DOCUMENTATION* diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 03dc4c1..d8f6a2e 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -1187,7 +1187,7 @@ config DEBUG_UART_VIRT default 0xf1c28000 if DEBUG_SUNXI_UART0 default 0xf1c28400 if DEBUG_SUNXI_UART1 default 0xf1f02800 if DEBUG_SUNXI_R_UART - default 0xf2100000 if DEBUG_PXA_UART1 + default 0xf6200000 if DEBUG_PXA_UART1 default 0xf4090000 if ARCH_LPC32XX default 0xf4200000 if ARCH_GEMINI default 0xf7000000 if DEBUG_S3C24XX_UART && (DEBUG_S3C_UART0 || \ diff --git a/arch/arm/boot/dts/vf610-cosmic.dts b/arch/arm/boot/dts/vf610-cosmic.dts index 3fd1b74..de1b453 100644 --- a/arch/arm/boot/dts/vf610-cosmic.dts +++ b/arch/arm/boot/dts/vf610-cosmic.dts @@ -33,6 +33,13 @@ }; +&esdhc1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_esdhc1>; + bus-width = <4>; + status = "okay"; +}; + &fec1 { phy-mode = "rmii"; pinctrl-names = "default"; @@ -42,6 +49,18 @@ &iomuxc { vf610-cosmic { + pinctrl_esdhc1: esdhc1grp { + fsl,pins = < + VF610_PAD_PTA24__ESDHC1_CLK 0x31ef + VF610_PAD_PTA25__ESDHC1_CMD 0x31ef + VF610_PAD_PTA26__ESDHC1_DAT0 0x31ef + VF610_PAD_PTA27__ESDHC1_DAT1 0x31ef + VF610_PAD_PTA28__ESDHC1_DATA2 0x31ef + VF610_PAD_PTA29__ESDHC1_DAT3 0x31ef + VF610_PAD_PTB28__GPIO_98 0x219d + >; + }; + pinctrl_fec1: fec1grp { fsl,pins = < VF610_PAD_PTC9__ENET_RMII1_MDC 0x30d2 diff --git a/arch/arm/boot/dts/zynq-parallella.dts b/arch/arm/boot/dts/zynq-parallella.dts index e1f51ca..0429bbd 100644 --- a/arch/arm/boot/dts/zynq-parallella.dts +++ b/arch/arm/boot/dts/zynq-parallella.dts @@ -34,6 +34,10 @@ }; }; +&clkc { + fclk-enable = <0xf>; +}; + &gem0 { status = "okay"; phy-mode = "rgmii-id"; diff --git a/arch/arm/common/edma.c b/arch/arm/common/edma.c index d86771a..72041f0 100644 --- a/arch/arm/common/edma.c +++ b/arch/arm/common/edma.c @@ -26,6 +26,7 @@ #include <linux/io.h> #include <linux/slab.h> #include <linux/edma.h> +#include <linux/dma-mapping.h> #include <linux/of_address.h> #include <linux/of_device.h> #include <linux/of_dma.h> @@ -1623,6 +1624,11 @@ static int edma_probe(struct platform_device *pdev) struct device_node *node = pdev->dev.of_node; struct device *dev = &pdev->dev; int ret; + struct platform_device_info edma_dev_info = { + .name = "edma-dma-engine", + .dma_mask = DMA_BIT_MASK(32), + .parent = &pdev->dev, + }; if (node) { /* Check if this is a second instance registered */ @@ -1793,6 +1799,9 @@ static int edma_probe(struct platform_device *pdev) edma_write_array(j, EDMA_QRAE, i, 0x0); } arch_num_cc++; + + edma_dev_info.id = j; + platform_device_register_full(&edma_dev_info); } return 0; diff --git a/arch/arm/configs/imx_v4_v5_defconfig b/arch/arm/configs/imx_v4_v5_defconfig index e688741..e6b0007 100644 --- a/arch/arm/configs/imx_v4_v5_defconfig +++ b/arch/arm/configs/imx_v4_v5_defconfig @@ -97,6 +97,7 @@ CONFIG_SERIAL_IMX_CONSOLE=y # CONFIG_HW_RANDOM is not set CONFIG_I2C_CHARDEV=y CONFIG_I2C_IMX=y +CONFIG_SPI=y CONFIG_SPI_IMX=y CONFIG_SPI_SPIDEV=y CONFIG_GPIO_SYSFS=y diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig index 8fca6e2..6790f1b 100644 --- a/arch/arm/configs/imx_v6_v7_defconfig +++ b/arch/arm/configs/imx_v6_v7_defconfig @@ -158,6 +158,7 @@ CONFIG_I2C_CHARDEV=y CONFIG_I2C_ALGOPCF=m CONFIG_I2C_ALGOPCA=m CONFIG_I2C_IMX=y +CONFIG_SPI=y CONFIG_SPI_IMX=y CONFIG_GPIO_SYSFS=y CONFIG_GPIO_MC9S08DZ60=y diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig index f1dc7fc..3487046 100644 --- a/arch/arm/configs/multi_v7_defconfig +++ b/arch/arm/configs/multi_v7_defconfig @@ -235,6 +235,7 @@ CONFIG_SPI_TEGRA20_SLINK=y CONFIG_SPI_XILINX=y CONFIG_PINCTRL_AS3722=y CONFIG_PINCTRL_PALMAS=y +CONFIG_PINCTRL_APQ8084=y CONFIG_GPIO_SYSFS=y CONFIG_GPIO_GENERIC_PLATFORM=y CONFIG_GPIO_DWAPB=y @@ -411,6 +412,7 @@ CONFIG_NVEC_POWER=y CONFIG_NVEC_PAZ00=y CONFIG_QCOM_GSBI=y CONFIG_COMMON_CLK_QCOM=y +CONFIG_APQ_MMCC_8084=y CONFIG_MSM_GCC_8660=y CONFIG_MSM_MMCC_8960=y CONFIG_MSM_MMCC_8974=y diff --git a/arch/arm/configs/omap2plus_defconfig b/arch/arm/configs/omap2plus_defconfig index 16e719c..b3f8667 100644 --- a/arch/arm/configs/omap2plus_defconfig +++ b/arch/arm/configs/omap2plus_defconfig @@ -86,7 +86,6 @@ CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_RARP=y # CONFIG_INET_LRO is not set -CONFIG_IPV6=y CONFIG_NETFILTER=y CONFIG_CAN=m CONFIG_CAN_C_CAN=m @@ -112,6 +111,7 @@ CONFIG_MTD_OOPS=y CONFIG_MTD_CFI=y CONFIG_MTD_CFI_INTELEXT=y CONFIG_MTD_NAND=y +CONFIG_MTD_NAND_ECC_BCH=y CONFIG_MTD_NAND_OMAP2=y CONFIG_MTD_ONENAND=y CONFIG_MTD_ONENAND_VERIFY_WRITE=y @@ -317,7 +317,7 @@ CONFIG_EXT4_FS=y CONFIG_FANOTIFY=y CONFIG_QUOTA=y CONFIG_QFMT_V2=y -CONFIG_AUTOFS4_FS=y +CONFIG_AUTOFS4_FS=m CONFIG_MSDOS_FS=y CONFIG_VFAT_FS=y CONFIG_TMPFS=y diff --git a/arch/arm/configs/socfpga_defconfig b/arch/arm/configs/socfpga_defconfig index d7a5855..a2956c3 100644 --- a/arch/arm/configs/socfpga_defconfig +++ b/arch/arm/configs/socfpga_defconfig @@ -1,5 +1,6 @@ -CONFIG_EXPERIMENTAL=y CONFIG_SYSVIPC=y +CONFIG_FHANDLE=y +CONFIG_HIGH_RES_TIMERS=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 @@ -11,23 +12,17 @@ CONFIG_PROFILING=y CONFIG_OPROFILE=y CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y -CONFIG_HOTPLUG=y # CONFIG_LBDAF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_IOSCHED_DEADLINE is not set # CONFIG_IOSCHED_CFQ is not set CONFIG_ARCH_SOCFPGA=y -CONFIG_MACH_SOCFPGA_CYCLONE5=y CONFIG_ARM_THUMBEE=y -# CONFIG_ARCH_VEXPRESS_CORTEX_A5_A9_ERRATA is not set -# CONFIG_CACHE_L2X0 is not set -CONFIG_HIGH_RES_TIMERS=y CONFIG_SMP=y CONFIG_NR_CPUS=2 CONFIG_AEABI=y CONFIG_ZBOOT_ROM_TEXT=0x0 CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="" CONFIG_VFP=y CONFIG_NEON=y CONFIG_NET=y @@ -41,38 +36,30 @@ CONFIG_IP_PNP=y CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y CONFIG_IP_PNP_RARP=y +CONFIG_IPV6=y +CONFIG_NETWORK_PHY_TIMESTAMPING=y +CONFIG_VLAN_8021Q=y +CONFIG_VLAN_8021Q_GVRP=y CONFIG_CAN=y -CONFIG_CAN_RAW=y -CONFIG_CAN_BCM=y -CONFIG_CAN_GW=y -CONFIG_CAN_DEV=y -CONFIG_CAN_CALC_BITTIMING=y CONFIG_CAN_C_CAN=y CONFIG_CAN_C_CAN_PLATFORM=y CONFIG_CAN_DEBUG_DEVICES=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_DEVTMPFS=y -CONFIG_PROC_DEVICETREE=y +CONFIG_DEVTMPFS_MOUNT=y CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=2 CONFIG_BLK_DEV_RAM_SIZE=8192 +CONFIG_SRAM=y CONFIG_SCSI=y # CONFIG_SCSI_PROC_FS is not set CONFIG_BLK_DEV_SD=y # CONFIG_SCSI_LOWLEVEL is not set CONFIG_NETDEVICES=y CONFIG_STMMAC_ETH=y +CONFIG_DWMAC_SOCFPGA=y CONFIG_MICREL_PHY=y -# CONFIG_STMMAC_PHY_ID_ZERO_WORKAROUND is not set CONFIG_INPUT_EVDEV=y -CONFIG_DWMAC_SOCFPGA=y -CONFIG_PPS=y -CONFIG_NETWORK_PHY_TIMESTAMPING=y -CONFIG_PTP_1588_CLOCK=y -CONFIG_VLAN_8021Q=y -CONFIG_VLAN_8021Q_GVRP=y -CONFIG_GARP=y -CONFIG_IPV6=y # CONFIG_SERIO_SERPORT is not set CONFIG_SERIO_AMBAKMI=y CONFIG_LEGACY_PTY_COUNT=16 @@ -81,45 +68,43 @@ CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_NR_UARTS=2 CONFIG_SERIAL_8250_RUNTIME_UARTS=2 CONFIG_SERIAL_8250_DW=y +CONFIG_I2C=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_DESIGNWARE_PLATFORM=y CONFIG_GPIOLIB=y CONFIG_GPIO_SYSFS=y CONFIG_GPIO_DWAPB=y -# CONFIG_RTC_HCTOSYS is not set +CONFIG_PMBUS=y +CONFIG_SENSORS_LTC2978=y +CONFIG_SENSORS_LTC2978_REGULATOR=y CONFIG_WATCHDOG=y CONFIG_DW_WATCHDOG=y +CONFIG_REGULATOR=y +CONFIG_REGULATOR_FIXED_VOLTAGE=y +CONFIG_USB=y +CONFIG_USB_DWC2=y +CONFIG_USB_DWC2_HOST=y +CONFIG_MMC=y +CONFIG_MMC_DW=y CONFIG_EXT2_FS=y CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y CONFIG_EXT3_FS=y -CONFIG_NFS_FS=y -CONFIG_ROOT_NFS=y -# CONFIG_DNOTIFY is not set -# CONFIG_INOTIFY_USER is not set -CONFIG_FHANDLE=y +CONFIG_EXT4_FS=y CONFIG_VFAT_FS=y CONFIG_NTFS_FS=y CONFIG_NTFS_RW=y CONFIG_TMPFS=y -CONFIG_JFFS2_FS=y +CONFIG_CONFIGFS_FS=y +CONFIG_NFS_FS=y +CONFIG_ROOT_NFS=y CONFIG_NLS_CODEPAGE_437=y CONFIG_NLS_ISO8859_1=y +CONFIG_PRINTK_TIME=y +CONFIG_DEBUG_INFO=y CONFIG_MAGIC_SYSRQ=y CONFIG_DETECT_HUNG_TASK=y # CONFIG_SCHED_DEBUG is not set -CONFIG_DEBUG_INFO=y CONFIG_ENABLE_DEFAULT_TRACERS=y CONFIG_DEBUG_USER=y CONFIG_XZ_DEC=y -CONFIG_I2C=y -CONFIG_I2C_DESIGNWARE_CORE=y -CONFIG_I2C_DESIGNWARE_PLATFORM=y -CONFIG_I2C_CHARDEV=y -CONFIG_MMC=y -CONFIG_MMC_DW=y -CONFIG_PM=y -CONFIG_SUSPEND=y -CONFIG_MMC_UNSAFE_RESUME=y -CONFIG_USB=y -CONFIG_USB_DWC2=y -CONFIG_USB_DWC2_HOST=y -CONFIG_USB_DWC2_PLATFORM=y diff --git a/arch/arm/mach-imx/clk-vf610.c b/arch/arm/mach-imx/clk-vf610.c index a178184..4096372 100644 --- a/arch/arm/mach-imx/clk-vf610.c +++ b/arch/arm/mach-imx/clk-vf610.c @@ -58,8 +58,14 @@ #define PFD_PLL1_BASE (anatop_base + 0x2b0) #define PFD_PLL2_BASE (anatop_base + 0x100) #define PFD_PLL3_BASE (anatop_base + 0xf0) +#define PLL1_CTRL (anatop_base + 0x270) +#define PLL2_CTRL (anatop_base + 0x30) #define PLL3_CTRL (anatop_base + 0x10) +#define PLL4_CTRL (anatop_base + 0x70) +#define PLL5_CTRL (anatop_base + 0xe0) +#define PLL6_CTRL (anatop_base + 0xa0) #define PLL7_CTRL (anatop_base + 0x20) +#define ANA_MISC1 (anatop_base + 0x160) static void __iomem *anatop_base; static void __iomem *ccm_base; @@ -67,25 +73,34 @@ static void __iomem *ccm_base; /* sources for multiplexer clocks, this is used multiple times */ static const char *fast_sels[] = { "firc", "fxosc", }; static const char *slow_sels[] = { "sirc_32k", "sxosc", }; -static const char *pll1_sels[] = { "pll1_main", "pll1_pfd1", "pll1_pfd2", "pll1_pfd3", "pll1_pfd4", }; -static const char *pll2_sels[] = { "pll2_main", "pll2_pfd1", "pll2_pfd2", "pll2_pfd3", "pll2_pfd4", }; -static const char *sys_sels[] = { "fast_clk_sel", "slow_clk_sel", "pll2_pfd_sel", "pll2_main", "pll1_pfd_sel", "pll3_main", }; +static const char *pll1_sels[] = { "pll1_sys", "pll1_pfd1", "pll1_pfd2", "pll1_pfd3", "pll1_pfd4", }; +static const char *pll2_sels[] = { "pll2_bus", "pll2_pfd1", "pll2_pfd2", "pll2_pfd3", "pll2_pfd4", }; +static const char *pll_bypass_src_sels[] = { "fast_clk_sel", "lvds1_in", }; +static const char *pll1_bypass_sels[] = { "pll1", "pll1_bypass_src", }; +static const char *pll2_bypass_sels[] = { "pll2", "pll2_bypass_src", }; +static const char *pll3_bypass_sels[] = { "pll3", "pll3_bypass_src", }; +static const char *pll4_bypass_sels[] = { "pll4", "pll4_bypass_src", }; +static const char *pll5_bypass_sels[] = { "pll5", "pll5_bypass_src", }; +static const char *pll6_bypass_sels[] = { "pll6", "pll6_bypass_src", }; +static const char *pll7_bypass_sels[] = { "pll7", "pll7_bypass_src", }; +static const char *sys_sels[] = { "fast_clk_sel", "slow_clk_sel", "pll2_pfd_sel", "pll2_bus", "pll1_pfd_sel", "pll3_usb_otg", }; static const char *ddr_sels[] = { "pll2_pfd2", "sys_sel", }; static const char *rmii_sels[] = { "enet_ext", "audio_ext", "enet_50m", "enet_25m", }; static const char *enet_ts_sels[] = { "enet_ext", "fxosc", "audio_ext", "usb", "enet_ts", "enet_25m", "enet_50m", }; -static const char *esai_sels[] = { "audio_ext", "mlb", "spdif_rx", "pll4_main_div", }; -static const char *sai_sels[] = { "audio_ext", "mlb", "spdif_rx", "pll4_main_div", }; +static const char *esai_sels[] = { "audio_ext", "mlb", "spdif_rx", "pll4_audio_div", }; +static const char *sai_sels[] = { "audio_ext", "mlb", "spdif_rx", "pll4_audio_div", }; static const char *nfc_sels[] = { "platform_bus", "pll1_pfd1", "pll3_pfd1", "pll3_pfd3", }; -static const char *qspi_sels[] = { "pll3_main", "pll3_pfd4", "pll2_pfd4", "pll1_pfd4", }; -static const char *esdhc_sels[] = { "pll3_main", "pll3_pfd3", "pll1_pfd3", "platform_bus", }; -static const char *dcu_sels[] = { "pll1_pfd2", "pll3_main", }; +static const char *qspi_sels[] = { "pll3_usb_otg", "pll3_pfd4", "pll2_pfd4", "pll1_pfd4", }; +static const char *esdhc_sels[] = { "pll3_usb_otg", "pll3_pfd3", "pll1_pfd3", "platform_bus", }; +static const char *dcu_sels[] = { "pll1_pfd2", "pll3_usb_otg", }; static const char *gpu_sels[] = { "pll2_pfd2", "pll3_pfd2", }; -static const char *vadc_sels[] = { "pll6_main_div", "pll3_main_div", "pll3_main", }; +static const char *vadc_sels[] = { "pll6_video_div", "pll3_usb_otg_div", "pll3_usb_otg", }; /* FTM counter clock source, not module clock */ static const char *ftm_ext_sels[] = {"sirc_128k", "sxosc", "fxosc_half", "audio_ext", }; static const char *ftm_fix_sels[] = { "sxosc", "ipg_bus", }; -static struct clk_div_table pll4_main_div_table[] = { + +static struct clk_div_table pll4_audio_div_table[] = { { .val = 0, .div = 1 }, { .val = 1, .div = 2 }, { .val = 2, .div = 6 }, @@ -120,6 +135,9 @@ static void __init vf610_clocks_init(struct device_node *ccm_node) clk[VF610_CLK_AUDIO_EXT] = imx_obtain_fixed_clock("audio_ext", 0); clk[VF610_CLK_ENET_EXT] = imx_obtain_fixed_clock("enet_ext", 0); + /* Clock source from external clock via LVDs PAD */ + clk[VF610_CLK_ANACLK1] = imx_obtain_fixed_clock("anaclk1", 0); + clk[VF610_CLK_FXOSC_HALF] = imx_clk_fixed_factor("fxosc_half", "fxosc", 1, 2); np = of_find_compatible_node(NULL, NULL, "fsl,vf610-anatop"); @@ -133,31 +151,63 @@ static void __init vf610_clocks_init(struct device_node *ccm_node) clk[VF610_CLK_SLOW_CLK_SEL] = imx_clk_mux("slow_clk_sel", CCM_CCSR, 4, 1, slow_sels, ARRAY_SIZE(slow_sels)); clk[VF610_CLK_FASK_CLK_SEL] = imx_clk_mux("fast_clk_sel", CCM_CCSR, 5, 1, fast_sels, ARRAY_SIZE(fast_sels)); - clk[VF610_CLK_PLL1_MAIN] = imx_clk_fixed_factor("pll1_main", "fast_clk_sel", 22, 1); - clk[VF610_CLK_PLL1_PFD1] = imx_clk_pfd("pll1_pfd1", "pll1_main", PFD_PLL1_BASE, 0); - clk[VF610_CLK_PLL1_PFD2] = imx_clk_pfd("pll1_pfd2", "pll1_main", PFD_PLL1_BASE, 1); - clk[VF610_CLK_PLL1_PFD3] = imx_clk_pfd("pll1_pfd3", "pll1_main", PFD_PLL1_BASE, 2); - clk[VF610_CLK_PLL1_PFD4] = imx_clk_pfd("pll1_pfd4", "pll1_main", PFD_PLL1_BASE, 3); - - clk[VF610_CLK_PLL2_MAIN] = imx_clk_fixed_factor("pll2_main", "fast_clk_sel", 22, 1); - clk[VF610_CLK_PLL2_PFD1] = imx_clk_pfd("pll2_pfd1", "pll2_main", PFD_PLL2_BASE, 0); - clk[VF610_CLK_PLL2_PFD2] = imx_clk_pfd("pll2_pfd2", "pll2_main", PFD_PLL2_BASE, 1); - clk[VF610_CLK_PLL2_PFD3] = imx_clk_pfd("pll2_pfd3", "pll2_main", PFD_PLL2_BASE, 2); - clk[VF610_CLK_PLL2_PFD4] = imx_clk_pfd("pll2_pfd4", "pll2_main", PFD_PLL2_BASE, 3); - - clk[VF610_CLK_PLL3_MAIN] = imx_clk_fixed_factor("pll3_main", "fast_clk_sel", 20, 1); - clk[VF610_CLK_PLL3_PFD1] = imx_clk_pfd("pll3_pfd1", "pll3_main", PFD_PLL3_BASE, 0); - clk[VF610_CLK_PLL3_PFD2] = imx_clk_pfd("pll3_pfd2", "pll3_main", PFD_PLL3_BASE, 1); - clk[VF610_CLK_PLL3_PFD3] = imx_clk_pfd("pll3_pfd3", "pll3_main", PFD_PLL3_BASE, 2); - clk[VF610_CLK_PLL3_PFD4] = imx_clk_pfd("pll3_pfd4", "pll3_main", PFD_PLL3_BASE, 3); - - clk[VF610_CLK_PLL4_MAIN] = imx_clk_fixed_factor("pll4_main", "fast_clk_sel", 25, 1); - /* Enet pll: fixed 50Mhz */ - clk[VF610_CLK_PLL5_MAIN] = imx_clk_fixed_factor("pll5_main", "fast_clk_sel", 125, 6); - /* pll6: default 960Mhz */ - clk[VF610_CLK_PLL6_MAIN] = imx_clk_fixed_factor("pll6_main", "fast_clk_sel", 40, 1); - /* pll7: USB1 PLL at 480MHz */ - clk[VF610_CLK_PLL7_MAIN] = imx_clk_pllv3(IMX_PLLV3_USB, "pll7_main", "fast_clk_sel", PLL7_CTRL, 0x2); + clk[VF610_CLK_PLL1_BYPASS_SRC] = imx_clk_mux("pll1_bypass_src", PLL1_CTRL, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); + clk[VF610_CLK_PLL2_BYPASS_SRC] = imx_clk_mux("pll2_bypass_src", PLL2_CTRL, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); + clk[VF610_CLK_PLL3_BYPASS_SRC] = imx_clk_mux("pll3_bypass_src", PLL3_CTRL, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); + clk[VF610_CLK_PLL4_BYPASS_SRC] = imx_clk_mux("pll4_bypass_src", PLL4_CTRL, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); + clk[VF610_CLK_PLL5_BYPASS_SRC] = imx_clk_mux("pll5_bypass_src", PLL5_CTRL, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); + clk[VF610_CLK_PLL6_BYPASS_SRC] = imx_clk_mux("pll6_bypass_src", PLL6_CTRL, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); + clk[VF610_CLK_PLL7_BYPASS_SRC] = imx_clk_mux("pll7_bypass_src", PLL7_CTRL, 14, 1, pll_bypass_src_sels, ARRAY_SIZE(pll_bypass_src_sels)); + + clk[VF610_CLK_PLL1] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll1", "pll1_bypass_src", PLL1_CTRL, 0x1); + clk[VF610_CLK_PLL2] = imx_clk_pllv3(IMX_PLLV3_GENERIC, "pll2", "pll2_bypass_src", PLL2_CTRL, 0x1); + clk[VF610_CLK_PLL3] = imx_clk_pllv3(IMX_PLLV3_USB, "pll3", "pll3_bypass_src", PLL3_CTRL, 0x1); + clk[VF610_CLK_PLL4] = imx_clk_pllv3(IMX_PLLV3_AV, "pll4", "pll4_bypass_src", PLL4_CTRL, 0x7f); + clk[VF610_CLK_PLL5] = imx_clk_pllv3(IMX_PLLV3_ENET, "pll5", "pll5_bypass_src", PLL5_CTRL, 0x3); + clk[VF610_CLK_PLL6] = imx_clk_pllv3(IMX_PLLV3_AV, "pll6", "pll6_bypass_src", PLL6_CTRL, 0x7f); + clk[VF610_CLK_PLL7] = imx_clk_pllv3(IMX_PLLV3_USB, "pll7", "pll7_bypass_src", PLL7_CTRL, 0x1); + + clk[VF610_PLL1_BYPASS] = imx_clk_mux_flags("pll1_bypass", PLL1_CTRL, 16, 1, pll1_bypass_sels, ARRAY_SIZE(pll1_bypass_sels), CLK_SET_RATE_PARENT); + clk[VF610_PLL2_BYPASS] = imx_clk_mux_flags("pll2_bypass", PLL2_CTRL, 16, 1, pll2_bypass_sels, ARRAY_SIZE(pll2_bypass_sels), CLK_SET_RATE_PARENT); + clk[VF610_PLL3_BYPASS] = imx_clk_mux_flags("pll3_bypass", PLL3_CTRL, 16, 1, pll3_bypass_sels, ARRAY_SIZE(pll3_bypass_sels), CLK_SET_RATE_PARENT); + clk[VF610_PLL4_BYPASS] = imx_clk_mux_flags("pll4_bypass", PLL4_CTRL, 16, 1, pll4_bypass_sels, ARRAY_SIZE(pll4_bypass_sels), CLK_SET_RATE_PARENT); + clk[VF610_PLL5_BYPASS] = imx_clk_mux_flags("pll5_bypass", PLL5_CTRL, 16, 1, pll5_bypass_sels, ARRAY_SIZE(pll5_bypass_sels), CLK_SET_RATE_PARENT); + clk[VF610_PLL6_BYPASS] = imx_clk_mux_flags("pll6_bypass", PLL6_CTRL, 16, 1, pll6_bypass_sels, ARRAY_SIZE(pll6_bypass_sels), CLK_SET_RATE_PARENT); + clk[VF610_PLL7_BYPASS] = imx_clk_mux_flags("pll7_bypass", PLL7_CTRL, 16, 1, pll7_bypass_sels, ARRAY_SIZE(pll7_bypass_sels), CLK_SET_RATE_PARENT); + + /* Do not bypass PLLs initially */ + clk_set_parent(clk[VF610_PLL1_BYPASS], clk[VF610_CLK_PLL1]); + clk_set_parent(clk[VF610_PLL2_BYPASS], clk[VF610_CLK_PLL2]); + clk_set_parent(clk[VF610_PLL3_BYPASS], clk[VF610_CLK_PLL3]); + clk_set_parent(clk[VF610_PLL4_BYPASS], clk[VF610_CLK_PLL4]); + clk_set_parent(clk[VF610_PLL5_BYPASS], clk[VF610_CLK_PLL5]); + clk_set_parent(clk[VF610_PLL6_BYPASS], clk[VF610_CLK_PLL6]); + clk_set_parent(clk[VF610_PLL7_BYPASS], clk[VF610_CLK_PLL7]); + + clk[VF610_CLK_PLL1_SYS] = imx_clk_gate("pll1_sys", "pll1_bypass", PLL1_CTRL, 13); + clk[VF610_CLK_PLL2_BUS] = imx_clk_gate("pll2_bus", "pll2_bypass", PLL2_CTRL, 13); + clk[VF610_CLK_PLL3_USB_OTG] = imx_clk_gate("pll3_usb_otg", "pll3_bypass", PLL3_CTRL, 13); + clk[VF610_CLK_PLL4_AUDIO] = imx_clk_gate("pll4_audio", "pll4_bypass", PLL4_CTRL, 13); + clk[VF610_CLK_PLL5_ENET] = imx_clk_gate("pll5_enet", "pll5_bypass", PLL5_CTRL, 13); + clk[VF610_CLK_PLL6_VIDEO] = imx_clk_gate("pll6_video", "pll6_bypass", PLL6_CTRL, 13); + clk[VF610_CLK_PLL7_USB_HOST] = imx_clk_gate("pll7_usb_host", "pll7_bypass", PLL7_CTRL, 13); + + clk[VF610_CLK_LVDS1_IN] = imx_clk_gate_exclusive("lvds1_in", "anaclk1", ANA_MISC1, 12, BIT(10)); + + clk[VF610_CLK_PLL1_PFD1] = imx_clk_pfd("pll1_pfd1", "pll1_sys", PFD_PLL1_BASE, 0); + clk[VF610_CLK_PLL1_PFD2] = imx_clk_pfd("pll1_pfd2", "pll1_sys", PFD_PLL1_BASE, 1); + clk[VF610_CLK_PLL1_PFD3] = imx_clk_pfd("pll1_pfd3", "pll1_sys", PFD_PLL1_BASE, 2); + clk[VF610_CLK_PLL1_PFD4] = imx_clk_pfd("pll1_pfd4", "pll1_sys", PFD_PLL1_BASE, 3); + + clk[VF610_CLK_PLL2_PFD1] = imx_clk_pfd("pll2_pfd1", "pll2_bus", PFD_PLL2_BASE, 0); + clk[VF610_CLK_PLL2_PFD2] = imx_clk_pfd("pll2_pfd2", "pll2_bus", PFD_PLL2_BASE, 1); + clk[VF610_CLK_PLL2_PFD3] = imx_clk_pfd("pll2_pfd3", "pll2_bus", PFD_PLL2_BASE, 2); + clk[VF610_CLK_PLL2_PFD4] = imx_clk_pfd("pll2_pfd4", "pll2_bus", PFD_PLL2_BASE, 3); + + clk[VF610_CLK_PLL3_PFD1] = imx_clk_pfd("pll3_pfd1", "pll3_usb_otg", PFD_PLL3_BASE, 0); + clk[VF610_CLK_PLL3_PFD2] = imx_clk_pfd("pll3_pfd2", "pll3_usb_otg", PFD_PLL3_BASE, 1); + clk[VF610_CLK_PLL3_PFD3] = imx_clk_pfd("pll3_pfd3", "pll3_usb_otg", PFD_PLL3_BASE, 2); + clk[VF610_CLK_PLL3_PFD4] = imx_clk_pfd("pll3_pfd4", "pll3_usb_otg", PFD_PLL3_BASE, 3); clk[VF610_CLK_PLL1_PFD_SEL] = imx_clk_mux("pll1_pfd_sel", CCM_CCSR, 16, 3, pll1_sels, 5); clk[VF610_CLK_PLL2_PFD_SEL] = imx_clk_mux("pll2_pfd_sel", CCM_CCSR, 19, 3, pll2_sels, 5); @@ -167,12 +217,12 @@ static void __init vf610_clocks_init(struct device_node *ccm_node) clk[VF610_CLK_PLATFORM_BUS] = imx_clk_divider("platform_bus", "sys_bus", CCM_CACRR, 3, 3); clk[VF610_CLK_IPG_BUS] = imx_clk_divider("ipg_bus", "platform_bus", CCM_CACRR, 11, 2); - clk[VF610_CLK_PLL3_MAIN_DIV] = imx_clk_divider("pll3_main_div", "pll3_main", CCM_CACRR, 20, 1); - clk[VF610_CLK_PLL4_MAIN_DIV] = clk_register_divider_table(NULL, "pll4_main_div", "pll4_main", 0, CCM_CACRR, 6, 3, 0, pll4_main_div_table, &imx_ccm_lock); - clk[VF610_CLK_PLL6_MAIN_DIV] = imx_clk_divider("pll6_main_div", "pll6_main", CCM_CACRR, 21, 1); + clk[VF610_CLK_PLL3_MAIN_DIV] = imx_clk_divider("pll3_usb_otg_div", "pll3_usb_otg", CCM_CACRR, 20, 1); + clk[VF610_CLK_PLL4_MAIN_DIV] = clk_register_divider_table(NULL, "pll4_audio_div", "pll4_audio", 0, CCM_CACRR, 6, 3, 0, pll4_audio_div_table, &imx_ccm_lock); + clk[VF610_CLK_PLL6_MAIN_DIV] = imx_clk_divider("pll6_video_div", "pll6_video", CCM_CACRR, 21, 1); - clk[VF610_CLK_USBPHY0] = imx_clk_gate("usbphy0", "pll3_main", PLL3_CTRL, 6); - clk[VF610_CLK_USBPHY1] = imx_clk_gate("usbphy1", "pll7_main", PLL7_CTRL, 6); + clk[VF610_CLK_USBPHY0] = imx_clk_gate("usbphy0", "pll3_usb_otg", PLL3_CTRL, 6); + clk[VF610_CLK_USBPHY1] = imx_clk_gate("usbphy1", "pll7_usb_host", PLL7_CTRL, 6); clk[VF610_CLK_USBC0] = imx_clk_gate2("usbc0", "ipg_bus", CCM_CCGR1, CCM_CCGRx_CGn(4)); clk[VF610_CLK_USBC1] = imx_clk_gate2("usbc1", "ipg_bus", CCM_CCGR7, CCM_CCGRx_CGn(4)); @@ -191,8 +241,8 @@ static void __init vf610_clocks_init(struct device_node *ccm_node) clk[VF610_CLK_QSPI1_X1_DIV] = imx_clk_divider("qspi1_x1", "qspi1_x2", CCM_CSCDR3, 11, 1); clk[VF610_CLK_QSPI1] = imx_clk_gate2("qspi1", "qspi1_x1", CCM_CCGR8, CCM_CCGRx_CGn(4)); - clk[VF610_CLK_ENET_50M] = imx_clk_fixed_factor("enet_50m", "pll5_main", 1, 10); - clk[VF610_CLK_ENET_25M] = imx_clk_fixed_factor("enet_25m", "pll5_main", 1, 20); + clk[VF610_CLK_ENET_50M] = imx_clk_fixed_factor("enet_50m", "pll5_enet", 1, 10); + clk[VF610_CLK_ENET_25M] = imx_clk_fixed_factor("enet_25m", "pll5_enet", 1, 20); clk[VF610_CLK_ENET_SEL] = imx_clk_mux("enet_sel", CCM_CSCMR2, 4, 2, rmii_sels, 4); clk[VF610_CLK_ENET_TS_SEL] = imx_clk_mux("enet_ts_sel", CCM_CSCMR2, 0, 3, enet_ts_sels, 7); clk[VF610_CLK_ENET] = imx_clk_gate("enet", "enet_sel", CCM_CSCDR1, 24); diff --git a/arch/arm/mach-ixp4xx/include/mach/io.h b/arch/arm/mach-ixp4xx/include/mach/io.h index 559c69a..7d11979 100644 --- a/arch/arm/mach-ixp4xx/include/mach/io.h +++ b/arch/arm/mach-ixp4xx/include/mach/io.h @@ -76,7 +76,7 @@ static inline void __indirect_writeb(u8 value, volatile void __iomem *p) u32 n, byte_enables, data; if (!is_pci_memory(addr)) { - __raw_writeb(value, addr); + __raw_writeb(value, p); return; } @@ -141,7 +141,7 @@ static inline unsigned char __indirect_readb(const volatile void __iomem *p) u32 n, byte_enables, data; if (!is_pci_memory(addr)) - return __raw_readb(addr); + return __raw_readb(p); n = addr % 4; byte_enables = (0xf & ~BIT(n)) << IXP4XX_PCI_NP_CBE_BESL; diff --git a/arch/arm/mach-omap2/omap_device.c b/arch/arm/mach-omap2/omap_device.c index d22c30d..8c58b71 100644 --- a/arch/arm/mach-omap2/omap_device.c +++ b/arch/arm/mach-omap2/omap_device.c @@ -917,6 +917,10 @@ static int __init omap_device_late_idle(struct device *dev, void *data) static int __init omap_device_late_init(void) { bus_for_each_dev(&platform_bus_type, NULL, NULL, omap_device_late_idle); + + WARN(!of_have_populated_dt(), + "legacy booting deprecated, please update to boot with .dts\n"); + return 0; } omap_late_initcall_sync(omap_device_late_init); diff --git a/arch/arm/mach-pxa/include/mach/addr-map.h b/arch/arm/mach-pxa/include/mach/addr-map.h index bbf9df3..d28fe29 100644 --- a/arch/arm/mach-pxa/include/mach/addr-map.h +++ b/arch/arm/mach-pxa/include/mach/addr-map.h @@ -39,6 +39,11 @@ #define DMEMC_SIZE 0x00100000 /* + * Reserved space for low level debug virtual addresses within + * 0xf6200000..0xf6201000 + */ + +/* * Internal Memory Controller (PXA27x and later) */ #define IMEMC_PHYS 0x58000000 diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index 4ce602c..dd301be 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -35,6 +35,9 @@ CONFIG_MODULE_UNLOAD=y CONFIG_ARCH_THUNDER=y CONFIG_ARCH_VEXPRESS=y CONFIG_ARCH_XGENE=y +CONFIG_PCI=y +CONFIG_PCI_MSI=y +CONFIG_PCI_XGENE=y CONFIG_SMP=y CONFIG_PREEMPT=y CONFIG_KSM=y @@ -52,6 +55,7 @@ CONFIG_IP_PNP_DHCP=y CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_LRO is not set # CONFIG_IPV6 is not set +CONFIG_BPF_JIT=y # CONFIG_WIRELESS is not set CONFIG_NET_9P=y CONFIG_NET_9P_VIRTIO=y @@ -65,16 +69,17 @@ CONFIG_VIRTIO_BLK=y CONFIG_BLK_DEV_SD=y # CONFIG_SCSI_LOWLEVEL is not set CONFIG_ATA=y +CONFIG_SATA_AHCI=y +CONFIG_SATA_AHCI_PLATFORM=y CONFIG_AHCI_XGENE=y -CONFIG_PHY_XGENE=y CONFIG_PATA_PLATFORM=y CONFIG_PATA_OF_PLATFORM=y CONFIG_NETDEVICES=y CONFIG_TUN=y CONFIG_VIRTIO_NET=y +CONFIG_NET_XGENE=y CONFIG_SMC91X=y CONFIG_SMSC911X=y -CONFIG_NET_XGENE=y # CONFIG_WLAN is not set CONFIG_INPUT_EVDEV=y # CONFIG_SERIO_SERPORT is not set @@ -87,6 +92,11 @@ CONFIG_SERIAL_AMBA_PL011_CONSOLE=y CONFIG_SERIAL_OF_PLATFORM=y CONFIG_VIRTIO_CONSOLE=y # CONFIG_HW_RANDOM is not set +# CONFIG_HMC_DRV is not set +CONFIG_SPI=y +CONFIG_SPI_PL022=y +CONFIG_GPIO_PL061=y +CONFIG_GPIO_XGENE=y # CONFIG_HWMON is not set CONFIG_REGULATOR=y CONFIG_REGULATOR_FIXED_VOLTAGE=y @@ -97,13 +107,25 @@ CONFIG_LOGO=y # CONFIG_LOGO_LINUX_MONO is not set # CONFIG_LOGO_LINUX_VGA16 is not set CONFIG_USB=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_HCD_PLATFORM=y CONFIG_USB_ISP1760_HCD=y +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_HCD_PLATFORM=y CONFIG_USB_STORAGE=y +CONFIG_USB_ULPI=y CONFIG_MMC=y CONFIG_MMC_ARMMMCI=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_PLTFM=y +CONFIG_MMC_SPI=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_DRV_EFI=y +CONFIG_RTC_DRV_XGENE=y CONFIG_VIRTIO_BALLOON=y CONFIG_VIRTIO_MMIO=y # CONFIG_IOMMU_SUPPORT is not set +CONFIG_PHY_XGENE=y CONFIG_EXT2_FS=y CONFIG_EXT3_FS=y # CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set diff --git a/arch/arm64/include/asm/unistd32.h b/arch/arm64/include/asm/unistd32.h index da1f06b..9dfdac4 100644 --- a/arch/arm64/include/asm/unistd32.h +++ b/arch/arm64/include/asm/unistd32.h @@ -792,3 +792,5 @@ __SYSCALL(__NR_renameat2, sys_renameat2) __SYSCALL(__NR_getrandom, sys_getrandom) #define __NR_memfd_create 385 __SYSCALL(__NR_memfd_create, sys_memfd_create) +#define __NR_bpf 386 +__SYSCALL(__NR_bpf, sys_bpf) diff --git a/arch/arm64/kernel/psci.c b/arch/arm64/kernel/psci.c index 866c1c8..663da77 100644 --- a/arch/arm64/kernel/psci.c +++ b/arch/arm64/kernel/psci.c @@ -528,7 +528,7 @@ static int __maybe_unused cpu_psci_cpu_suspend(unsigned long index) if (WARN_ON_ONCE(!index)) return -EINVAL; - if (state->type == PSCI_POWER_STATE_TYPE_STANDBY) + if (state[index - 1].type == PSCI_POWER_STATE_TYPE_STANDBY) ret = psci_ops.cpu_suspend(state[index - 1], 0); else ret = __cpu_suspend(index, psci_suspend_finisher); diff --git a/arch/m68k/include/asm/unistd.h b/arch/m68k/include/asm/unistd.h index 4ef7a54..75e75d7 100644 --- a/arch/m68k/include/asm/unistd.h +++ b/arch/m68k/include/asm/unistd.h @@ -4,7 +4,7 @@ #include <uapi/asm/unistd.h> -#define NR_syscalls 354 +#define NR_syscalls 355 #define __ARCH_WANT_OLD_READDIR #define __ARCH_WANT_OLD_STAT diff --git a/arch/m68k/include/uapi/asm/unistd.h b/arch/m68k/include/uapi/asm/unistd.h index b419c6b..2c1bec9 100644 --- a/arch/m68k/include/uapi/asm/unistd.h +++ b/arch/m68k/include/uapi/asm/unistd.h @@ -359,5 +359,6 @@ #define __NR_renameat2 351 #define __NR_getrandom 352 #define __NR_memfd_create 353 +#define __NR_bpf 354 #endif /* _UAPI_ASM_M68K_UNISTD_H_ */ diff --git a/arch/m68k/kernel/syscalltable.S b/arch/m68k/kernel/syscalltable.S index 05b46c2..2ca219e 100644 --- a/arch/m68k/kernel/syscalltable.S +++ b/arch/m68k/kernel/syscalltable.S @@ -374,4 +374,5 @@ ENTRY(sys_call_table) .long sys_renameat2 .long sys_getrandom .long sys_memfd_create + .long sys_bpf diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 23cb948..5807647 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -93,6 +93,15 @@ LDFLAGS_vmlinux += -G 0 -static -n -nostdlib KBUILD_AFLAGS_MODULE += -mlong-calls KBUILD_CFLAGS_MODULE += -mlong-calls +# +# pass -msoft-float to GAS if it supports it. However on newer binutils +# (specifically newer than 2.24.51.20140728) we then also need to explicitly +# set ".set hardfloat" in all files which manipulate floating point registers. +# +ifneq ($(call as-option,-Wa$(comma)-msoft-float,),) + cflags-y += -DGAS_HAS_SET_HARDFLOAT -Wa,-msoft-float +endif + cflags-y += -ffreestanding # diff --git a/arch/mips/cavium-octeon/octeon-irq.c b/arch/mips/cavium-octeon/octeon-irq.c index 7417340..2bc4aa9 100644 --- a/arch/mips/cavium-octeon/octeon-irq.c +++ b/arch/mips/cavium-octeon/octeon-irq.c @@ -809,6 +809,7 @@ static struct irq_chip octeon_irq_chip_ciu_gpio_v2 = { .irq_set_type = octeon_irq_ciu_gpio_set_type, #ifdef CONFIG_SMP .irq_set_affinity = octeon_irq_ciu_set_affinity_v2, + .irq_cpu_offline = octeon_irq_cpu_offline_ciu, #endif .flags = IRQCHIP_SET_TYPE_MASKED, }; @@ -823,6 +824,7 @@ static struct irq_chip octeon_irq_chip_ciu_gpio = { .irq_set_type = octeon_irq_ciu_gpio_set_type, #ifdef CONFIG_SMP .irq_set_affinity = octeon_irq_ciu_set_affinity, + .irq_cpu_offline = octeon_irq_cpu_offline_ciu, #endif .flags = IRQCHIP_SET_TYPE_MASKED, }; diff --git a/arch/mips/cavium-octeon/octeon-platform.c b/arch/mips/cavium-octeon/octeon-platform.c index 6df0f4d..b67ddf0 100644 --- a/arch/mips/cavium-octeon/octeon-platform.c +++ b/arch/mips/cavium-octeon/octeon-platform.c @@ -7,22 +7,27 @@ * Copyright (C) 2008 Wind River Systems */ +#include <linux/delay.h> #include <linux/init.h> #include <linux/irq.h> #include <linux/i2c.h> #include <linux/usb.h> #include <linux/dma-mapping.h> #include <linux/module.h> +#include <linux/mutex.h> #include <linux/slab.h> #include <linux/platform_device.h> #include <linux/of_platform.h> #include <linux/of_fdt.h> #include <linux/libfdt.h> +#include <linux/usb/ehci_pdriver.h> +#include <linux/usb/ohci_pdriver.h> #include <asm/octeon/octeon.h> #include <asm/octeon/cvmx-rnm-defs.h> #include <asm/octeon/cvmx-helper.h> #include <asm/octeon/cvmx-helper-board.h> +#include <asm/octeon/cvmx-uctlx-defs.h> /* Octeon Random Number Generator. */ static int __init octeon_rng_device_init(void) @@ -68,6 +73,229 @@ device_initcall(octeon_rng_device_init); #ifdef CONFIG_USB +static DEFINE_MUTEX(octeon2_usb_clocks_mutex); + +static int octeon2_usb_clock_start_cnt; + +static void octeon2_usb_clocks_start(void) +{ + u64 div; + union cvmx_uctlx_if_ena if_ena; + union cvmx_uctlx_clk_rst_ctl clk_rst_ctl; + union cvmx_uctlx_uphy_ctl_status uphy_ctl_status; + union cvmx_uctlx_uphy_portx_ctl_status port_ctl_status; + int i; + unsigned long io_clk_64_to_ns; + + + mutex_lock(&octeon2_usb_clocks_mutex); + + octeon2_usb_clock_start_cnt++; + if (octeon2_usb_clock_start_cnt != 1) + goto exit; + + io_clk_64_to_ns = 64000000000ull / octeon_get_io_clock_rate(); + + /* + * Step 1: Wait for voltages stable. That surely happened + * before starting the kernel. + * + * Step 2: Enable SCLK of UCTL by writing UCTL0_IF_ENA[EN] = 1 + */ + if_ena.u64 = 0; + if_ena.s.en = 1; + cvmx_write_csr(CVMX_UCTLX_IF_ENA(0), if_ena.u64); + + /* Step 3: Configure the reference clock, PHY, and HCLK */ + clk_rst_ctl.u64 = cvmx_read_csr(CVMX_UCTLX_CLK_RST_CTL(0)); + + /* + * If the UCTL looks like it has already been started, skip + * the initialization, otherwise bus errors are obtained. + */ + if (clk_rst_ctl.s.hrst) + goto end_clock; + /* 3a */ + clk_rst_ctl.s.p_por = 1; + clk_rst_ctl.s.hrst = 0; + clk_rst_ctl.s.p_prst = 0; + clk_rst_ctl.s.h_clkdiv_rst = 0; + clk_rst_ctl.s.o_clkdiv_rst = 0; + clk_rst_ctl.s.h_clkdiv_en = 0; + clk_rst_ctl.s.o_clkdiv_en = 0; + cvmx_write_csr(CVMX_UCTLX_CLK_RST_CTL(0), clk_rst_ctl.u64); + + /* 3b */ + /* 12MHz crystal. */ + clk_rst_ctl.s.p_refclk_sel = 0; + clk_rst_ctl.s.p_refclk_div = 0; + cvmx_write_csr(CVMX_UCTLX_CLK_RST_CTL(0), clk_rst_ctl.u64); + + /* 3c */ + div = octeon_get_io_clock_rate() / 130000000ull; + + switch (div) { + case 0: + div = 1; + break; + case 1: + case 2: + case 3: + case 4: + break; + case 5: + div = 4; + break; + case 6: + case 7: + div = 6; + break; + case 8: + case 9: + case 10: + case 11: + div = 8; + break; + default: + div = 12; + break; + } + clk_rst_ctl.s.h_div = div; + cvmx_write_csr(CVMX_UCTLX_CLK_RST_CTL(0), clk_rst_ctl.u64); + /* Read it back, */ + clk_rst_ctl.u64 = cvmx_read_csr(CVMX_UCTLX_CLK_RST_CTL(0)); + clk_rst_ctl.s.h_clkdiv_en = 1; + cvmx_write_csr(CVMX_UCTLX_CLK_RST_CTL(0), clk_rst_ctl.u64); + /* 3d */ + clk_rst_ctl.s.h_clkdiv_rst = 1; + cvmx_write_csr(CVMX_UCTLX_CLK_RST_CTL(0), clk_rst_ctl.u64); + + /* 3e: delay 64 io clocks */ + ndelay(io_clk_64_to_ns); + + /* + * Step 4: Program the power-on reset field in the UCTL + * clock-reset-control register. + */ + clk_rst_ctl.s.p_por = 0; + cvmx_write_csr(CVMX_UCTLX_CLK_RST_CTL(0), clk_rst_ctl.u64); + + /* Step 5: Wait 1 ms for the PHY clock to start. */ + mdelay(1); + + /* + * Step 6: Program the reset input from automatic test + * equipment field in the UPHY CSR + */ + uphy_ctl_status.u64 = cvmx_read_csr(CVMX_UCTLX_UPHY_CTL_STATUS(0)); + uphy_ctl_status.s.ate_reset = 1; + cvmx_write_csr(CVMX_UCTLX_UPHY_CTL_STATUS(0), uphy_ctl_status.u64); + + /* Step 7: Wait for at least 10ns. */ + ndelay(10); + + /* Step 8: Clear the ATE_RESET field in the UPHY CSR. */ + uphy_ctl_status.s.ate_reset = 0; + cvmx_write_csr(CVMX_UCTLX_UPHY_CTL_STATUS(0), uphy_ctl_status.u64); + + /* + * Step 9: Wait for at least 20ns for UPHY to output PHY clock + * signals and OHCI_CLK48 + */ + ndelay(20); + + /* Step 10: Configure the OHCI_CLK48 and OHCI_CLK12 clocks. */ + /* 10a */ + clk_rst_ctl.s.o_clkdiv_rst = 1; + cvmx_write_csr(CVMX_UCTLX_CLK_RST_CTL(0), clk_rst_ctl.u64); + + /* 10b */ + clk_rst_ctl.s.o_clkdiv_en = 1; + cvmx_write_csr(CVMX_UCTLX_CLK_RST_CTL(0), clk_rst_ctl.u64); + + /* 10c */ + ndelay(io_clk_64_to_ns); + + /* + * Step 11: Program the PHY reset field: + * UCTL0_CLK_RST_CTL[P_PRST] = 1 + */ + clk_rst_ctl.s.p_prst = 1; + cvmx_write_csr(CVMX_UCTLX_CLK_RST_CTL(0), clk_rst_ctl.u64); + + /* Step 12: Wait 1 uS. */ + udelay(1); + + /* Step 13: Program the HRESET_N field: UCTL0_CLK_RST_CTL[HRST] = 1 */ + clk_rst_ctl.s.hrst = 1; + cvmx_write_csr(CVMX_UCTLX_CLK_RST_CTL(0), clk_rst_ctl.u64); + +end_clock: + /* Now we can set some other registers. */ + + for (i = 0; i <= 1; i++) { + port_ctl_status.u64 = + cvmx_read_csr(CVMX_UCTLX_UPHY_PORTX_CTL_STATUS(i, 0)); + /* Set txvreftune to 15 to obtain compliant 'eye' diagram. */ + port_ctl_status.s.txvreftune = 15; + port_ctl_status.s.txrisetune = 1; + port_ctl_status.s.txpreemphasistune = 1; + cvmx_write_csr(CVMX_UCTLX_UPHY_PORTX_CTL_STATUS(i, 0), + port_ctl_status.u64); + } + + /* Set uSOF cycle period to 60,000 bits. */ + cvmx_write_csr(CVMX_UCTLX_EHCI_FLA(0), 0x20ull); +exit: + mutex_unlock(&octeon2_usb_clocks_mutex); +} + +static void octeon2_usb_clocks_stop(void) +{ + mutex_lock(&octeon2_usb_clocks_mutex); + octeon2_usb_clock_start_cnt--; + mutex_unlock(&octeon2_usb_clocks_mutex); +} + +static int octeon_ehci_power_on(struct platform_device *pdev) +{ + octeon2_usb_clocks_start(); + return 0; +} + +static void octeon_ehci_power_off(struct platform_device *pdev) +{ + octeon2_usb_clocks_stop(); +} + +static struct usb_ehci_pdata octeon_ehci_pdata = { + /* Octeon EHCI matches CPU endianness. */ +#ifdef __BIG_ENDIAN + .big_endian_mmio = 1, +#endif + .power_on = octeon_ehci_power_on, + .power_off = octeon_ehci_power_off, +}; + +static void __init octeon_ehci_hw_start(void) +{ + union cvmx_uctlx_ehci_ctl ehci_ctl; + + octeon2_usb_clocks_start(); + + ehci_ctl.u64 = cvmx_read_csr(CVMX_UCTLX_EHCI_CTL(0)); + /* Use 64-bit addressing. */ + ehci_ctl.s.ehci_64b_addr_en = 1; + ehci_ctl.s.l2c_addr_msb = 0; + ehci_ctl.s.l2c_buff_emod = 1; /* Byte swapped. */ + ehci_ctl.s.l2c_desc_emod = 1; /* Byte swapped. */ + cvmx_write_csr(CVMX_UCTLX_EHCI_CTL(0), ehci_ctl.u64); + + octeon2_usb_clocks_stop(); +} + +static u64 octeon_ehci_dma_mask = DMA_BIT_MASK(64); + static int __init octeon_ehci_device_init(void) { struct platform_device *pd; @@ -88,7 +316,7 @@ static int __init octeon_ehci_device_init(void) if (octeon_is_simulation() || usb_disabled()) return 0; /* No USB in the simulator. */ - pd = platform_device_alloc("octeon-ehci", 0); + pd = platform_device_alloc("ehci-platform", 0); if (!pd) { ret = -ENOMEM; goto out; @@ -105,6 +333,10 @@ static int __init octeon_ehci_device_init(void) if (ret) goto fail; + pd->dev.dma_mask = &octeon_ehci_dma_mask; + pd->dev.platform_data = &octeon_ehci_pdata; + octeon_ehci_hw_start(); + ret = platform_device_add(pd); if (ret) goto fail; @@ -117,6 +349,41 @@ out: } device_initcall(octeon_ehci_device_init); +static int octeon_ohci_power_on(struct platform_device *pdev) +{ + octeon2_usb_clocks_start(); + return 0; +} + +static void octeon_ohci_power_off(struct platform_device *pdev) +{ + octeon2_usb_clocks_stop(); +} + +static struct usb_ohci_pdata octeon_ohci_pdata = { + /* Octeon OHCI matches CPU endianness. */ +#ifdef __BIG_ENDIAN + .big_endian_mmio = 1, +#endif + .power_on = octeon_ohci_power_on, + .power_off = octeon_ohci_power_off, +}; + +static void __init octeon_ohci_hw_start(void) +{ + union cvmx_uctlx_ohci_ctl ohci_ctl; + + octeon2_usb_clocks_start(); + + ohci_ctl.u64 = cvmx_read_csr(CVMX_UCTLX_OHCI_CTL(0)); + ohci_ctl.s.l2c_addr_msb = 0; + ohci_ctl.s.l2c_buff_emod = 1; /* Byte swapped. */ + ohci_ctl.s.l2c_desc_emod = 1; /* Byte swapped. */ + cvmx_write_csr(CVMX_UCTLX_OHCI_CTL(0), ohci_ctl.u64); + + octeon2_usb_clocks_stop(); +} + static int __init octeon_ohci_device_init(void) { struct platform_device *pd; @@ -137,7 +404,7 @@ static int __init octeon_ohci_device_init(void) if (octeon_is_simulation() || usb_disabled()) return 0; /* No USB in the simulator. */ - pd = platform_device_alloc("octeon-ohci", 0); + pd = platform_device_alloc("ohci-platform", 0); if (!pd) { ret = -ENOMEM; goto out; @@ -154,6 +421,9 @@ static int __init octeon_ohci_device_init(void) if (ret) goto fail; + pd->dev.platform_data = &octeon_ohci_pdata; + octeon_ohci_hw_start(); + ret = platform_device_add(pd); if (ret) goto fail; diff --git a/arch/mips/configs/cavium_octeon_defconfig b/arch/mips/configs/cavium_octeon_defconfig index b2476a1..e57058d 100644 --- a/arch/mips/configs/cavium_octeon_defconfig +++ b/arch/mips/configs/cavium_octeon_defconfig @@ -120,6 +120,9 @@ CONFIG_SPI_OCTEON=y # CONFIG_HWMON is not set CONFIG_WATCHDOG=y # CONFIG_USB_SUPPORT is not set +CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y +CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y +CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_RTC_CLASS=y CONFIG_RTC_DRV_DS1307=y CONFIG_STAGING=y diff --git a/arch/mips/include/asm/asmmacro-32.h b/arch/mips/include/asm/asmmacro-32.h index e38c281..cdac7b3 100644 --- a/arch/mips/include/asm/asmmacro-32.h +++ b/arch/mips/include/asm/asmmacro-32.h @@ -13,6 +13,8 @@ #include <asm/mipsregs.h> .macro fpu_save_single thread tmp=t0 + .set push + SET_HARDFLOAT cfc1 \tmp, fcr31 swc1 $f0, THREAD_FPR0_LS64(\thread) swc1 $f1, THREAD_FPR1_LS64(\thread) @@ -47,9 +49,12 @@ swc1 $f30, THREAD_FPR30_LS64(\thread) swc1 $f31, THREAD_FPR31_LS64(\thread) sw \tmp, THREAD_FCR31(\thread) + .set pop .endm .macro fpu_restore_single thread tmp=t0 + .set push + SET_HARDFLOAT lw \tmp, THREAD_FCR31(\thread) lwc1 $f0, THREAD_FPR0_LS64(\thread) lwc1 $f1, THREAD_FPR1_LS64(\thread) @@ -84,6 +89,7 @@ lwc1 $f30, THREAD_FPR30_LS64(\thread) lwc1 $f31, THREAD_FPR31_LS64(\thread) ctc1 \tmp, fcr31 + .set pop .endm .macro cpu_save_nonscratch thread diff --git a/arch/mips/include/asm/asmmacro.h b/arch/mips/include/asm/asmmacro.h index cd9a98b..6caf876 100644 --- a/arch/mips/include/asm/asmmacro.h +++ b/arch/mips/include/asm/asmmacro.h @@ -57,6 +57,8 @@ #endif /* CONFIG_CPU_MIPSR2 */ .macro fpu_save_16even thread tmp=t0 + .set push + SET_HARDFLOAT cfc1 \tmp, fcr31 sdc1 $f0, THREAD_FPR0_LS64(\thread) sdc1 $f2, THREAD_FPR2_LS64(\thread) @@ -75,11 +77,13 @@ sdc1 $f28, THREAD_FPR28_LS64(\thread) sdc1 $f30, THREAD_FPR30_LS64(\thread) sw \tmp, THREAD_FCR31(\thread) + .set pop .endm .macro fpu_save_16odd thread .set push .set mips64r2 + SET_HARDFLOAT sdc1 $f1, THREAD_FPR1_LS64(\thread) sdc1 $f3, THREAD_FPR3_LS64(\thread) sdc1 $f5, THREAD_FPR5_LS64(\thread) @@ -110,6 +114,8 @@ .endm .macro fpu_restore_16even thread tmp=t0 + .set push + SET_HARDFLOAT lw \tmp, THREAD_FCR31(\thread) ldc1 $f0, THREAD_FPR0_LS64(\thread) ldc1 $f2, THREAD_FPR2_LS64(\thread) @@ -133,6 +139,7 @@ .macro fpu_restore_16odd thread .set push .set mips64r2 + SET_HARDFLOAT ldc1 $f1, THREAD_FPR1_LS64(\thread) ldc1 $f3, THREAD_FPR3_LS64(\thread) ldc1 $f5, THREAD_FPR5_LS64(\thread) @@ -277,6 +284,7 @@ .macro cfcmsa rd, cs .set push .set noat + SET_HARDFLOAT .insn .word CFC_MSA_INSN | (\cs << 11) move \rd, $1 @@ -286,6 +294,7 @@ .macro ctcmsa cd, rs .set push .set noat + SET_HARDFLOAT move $1, \rs .word CTC_MSA_INSN | (\cd << 6) .set pop @@ -294,6 +303,7 @@ .macro ld_d wd, off, base .set push .set noat + SET_HARDFLOAT add $1, \base, \off .word LDD_MSA_INSN | (\wd << 6) .set pop @@ -302,6 +312,7 @@ .macro st_d wd, off, base .set push .set noat + SET_HARDFLOAT add $1, \base, \off .word STD_MSA_INSN | (\wd << 6) .set pop @@ -310,6 +321,7 @@ .macro copy_u_w rd, ws, n .set push .set noat + SET_HARDFLOAT .insn .word COPY_UW_MSA_INSN | (\n << 16) | (\ws << 11) /* move triggers an assembler bug... */ @@ -320,6 +332,7 @@ .macro copy_u_d rd, ws, n .set push .set noat + SET_HARDFLOAT .insn .word COPY_UD_MSA_INSN | (\n << 16) | (\ws << 11) /* move triggers an assembler bug... */ @@ -330,6 +343,7 @@ .macro insert_w wd, n, rs .set push .set noat + SET_HARDFLOAT /* move triggers an assembler bug... */ or $1, \rs, zero .word INSERT_W_MSA_INSN | (\n << 16) | (\wd << 6) @@ -339,6 +353,7 @@ .macro insert_d wd, n, rs .set push .set noat + SET_HARDFLOAT /* move triggers an assembler bug... */ or $1, \rs, zero .word INSERT_D_MSA_INSN | (\n << 16) | (\wd << 6) @@ -381,6 +396,7 @@ st_d 31, THREAD_FPR31, \thread .set push .set noat + SET_HARDFLOAT cfcmsa $1, MSA_CSR sw $1, THREAD_MSA_CSR(\thread) .set pop @@ -389,6 +405,7 @@ .macro msa_restore_all thread .set push .set noat + SET_HARDFLOAT lw $1, THREAD_MSA_CSR(\thread) ctcmsa MSA_CSR, $1 .set pop @@ -441,6 +458,7 @@ .macro msa_init_all_upper .set push .set noat + SET_HARDFLOAT not $1, zero msa_init_upper 0 .set pop diff --git a/arch/mips/include/asm/fpregdef.h b/arch/mips/include/asm/fpregdef.h index 429481f..f184ba0 100644 --- a/arch/mips/include/asm/fpregdef.h +++ b/arch/mips/include/asm/fpregdef.h @@ -14,6 +14,20 @@ #include <asm/sgidefs.h> +/* + * starting with binutils 2.24.51.20140729, MIPS binutils warn about mixing + * hardfloat and softfloat object files. The kernel build uses soft-float by + * default, so we also need to pass -msoft-float along to GAS if it supports it. + * But this in turn causes assembler errors in files which access hardfloat + * registers. We detect if GAS supports "-msoft-float" in the Makefile and + * explicitly put ".set hardfloat" where floating point registers are touched. + */ +#ifdef GAS_HAS_SET_HARDFLOAT +#define SET_HARDFLOAT .set hardfloat +#else +#define SET_HARDFLOAT +#endif + #if _MIPS_SIM == _MIPS_SIM_ABI32 /* diff --git a/arch/mips/include/asm/fpu.h b/arch/mips/include/asm/fpu.h index 4d0aeda..dd56241 100644 --- a/arch/mips/include/asm/fpu.h +++ b/arch/mips/include/asm/fpu.h @@ -145,8 +145,8 @@ static inline void lose_fpu(int save) if (is_msa_enabled()) { if (save) { save_msa(current); - asm volatile("cfc1 %0, $31" - : "=r"(current->thread.fpu.fcr31)); + current->thread.fpu.fcr31 = + read_32bit_cp1_register(CP1_STATUS); } disable_msa(); clear_thread_flag(TIF_USEDMSA); diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h index cf3b580..b46cd22 100644 --- a/arch/mips/include/asm/mipsregs.h +++ b/arch/mips/include/asm/mipsregs.h @@ -1324,7 +1324,7 @@ do { \ /* * Macros to access the floating point coprocessor control registers */ -#define read_32bit_cp1_register(source) \ +#define _read_32bit_cp1_register(source, gas_hardfloat) \ ({ \ int __res; \ \ @@ -1334,12 +1334,21 @@ do { \ " # gas fails to assemble cfc1 for some archs, \n" \ " # like Octeon. \n" \ " .set mips1 \n" \ + " "STR(gas_hardfloat)" \n" \ " cfc1 %0,"STR(source)" \n" \ " .set pop \n" \ : "=r" (__res)); \ __res; \ }) +#ifdef GAS_HAS_SET_HARDFLOAT +#define read_32bit_cp1_register(source) \ + _read_32bit_cp1_register(source, .set hardfloat) +#else +#define read_32bit_cp1_register(source) \ + _read_32bit_cp1_register(source, ) +#endif + #ifdef HAVE_AS_DSP #define rddsp(mask) \ ({ \ diff --git a/arch/mips/include/uapi/asm/unistd.h b/arch/mips/include/uapi/asm/unistd.h index fdb4923..9dc5856 100644 --- a/arch/mips/include/uapi/asm/unistd.h +++ b/arch/mips/include/uapi/asm/unistd.h @@ -375,16 +375,17 @@ #define __NR_seccomp (__NR_Linux + 352) #define __NR_getrandom (__NR_Linux + 353) #define __NR_memfd_create (__NR_Linux + 354) +#define __NR_bpf (__NR_Linux + 355) /* * Offset of the last Linux o32 flavoured syscall */ -#define __NR_Linux_syscalls 354 +#define __NR_Linux_syscalls 355 #endif /* _MIPS_SIM == _MIPS_SIM_ABI32 */ #define __NR_O32_Linux 4000 -#define __NR_O32_Linux_syscalls 354 +#define __NR_O32_Linux_syscalls 355 #if _MIPS_SIM == _MIPS_SIM_ABI64 @@ -707,16 +708,17 @@ #define __NR_seccomp (__NR_Linux + 312) #define __NR_getrandom (__NR_Linux + 313) #define __NR_memfd_create (__NR_Linux + 314) +#define __NR_bpf (__NR_Linux + 315) /* * Offset of the last Linux 64-bit flavoured syscall */ -#define __NR_Linux_syscalls 314 +#define __NR_Linux_syscalls 315 #endif /* _MIPS_SIM == _MIPS_SIM_ABI64 */ #define __NR_64_Linux 5000 -#define __NR_64_Linux_syscalls 314 +#define __NR_64_Linux_syscalls 315 #if _MIPS_SIM == _MIPS_SIM_NABI32 @@ -1043,15 +1045,16 @@ #define __NR_seccomp (__NR_Linux + 316) #define __NR_getrandom (__NR_Linux + 317) #define __NR_memfd_create (__NR_Linux + 318) +#define __NR_memfd_create (__NR_Linux + 319) /* * Offset of the last N32 flavoured syscall */ -#define __NR_Linux_syscalls 318 +#define __NR_Linux_syscalls 319 #endif /* _MIPS_SIM == _MIPS_SIM_NABI32 */ #define __NR_N32_Linux 6000 -#define __NR_N32_Linux_syscalls 318 +#define __NR_N32_Linux_syscalls 319 #endif /* _UAPI_ASM_UNISTD_H */ diff --git a/arch/mips/kernel/branch.c b/arch/mips/kernel/branch.c index 7b2df22..4d7d99d 100644 --- a/arch/mips/kernel/branch.c +++ b/arch/mips/kernel/branch.c @@ -144,7 +144,7 @@ int __mm_isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn, case mm_bc1t_op: preempt_disable(); if (is_fpu_owner()) - asm volatile("cfc1\t%0,$31" : "=r" (fcr31)); + fcr31 = read_32bit_cp1_register(CP1_STATUS); else fcr31 = current->thread.fpu.fcr31; preempt_enable(); @@ -562,11 +562,7 @@ int __compute_return_epc_for_insn(struct pt_regs *regs, case cop1_op: preempt_disable(); if (is_fpu_owner()) - asm volatile( - ".set push\n" - "\t.set mips1\n" - "\tcfc1\t%0,$31\n" - "\t.set pop" : "=r" (fcr31)); + fcr31 = read_32bit_cp1_register(CP1_STATUS); else fcr31 = current->thread.fpu.fcr31; preempt_enable(); diff --git a/arch/mips/kernel/genex.S b/arch/mips/kernel/genex.S index ac35e12..a5e26dd 100644 --- a/arch/mips/kernel/genex.S +++ b/arch/mips/kernel/genex.S @@ -358,6 +358,7 @@ NESTED(nmi_handler, PT_SIZE, sp) .set push /* gas fails to assemble cfc1 for some archs (octeon).*/ \ .set mips1 + SET_HARDFLOAT cfc1 a1, fcr31 li a2, ~(0x3f << 12) and a2, a1 diff --git a/arch/mips/kernel/r2300_fpu.S b/arch/mips/kernel/r2300_fpu.S index f31063d..5ce3b74 100644 --- a/arch/mips/kernel/r2300_fpu.S +++ b/arch/mips/kernel/r2300_fpu.S @@ -28,6 +28,8 @@ .set mips1 /* Save floating point context */ LEAF(_save_fp_context) + .set push + SET_HARDFLOAT li v0, 0 # assume success cfc1 t1,fcr31 EX(swc1 $f0,(SC_FPREGS+0)(a0)) @@ -65,6 +67,7 @@ LEAF(_save_fp_context) EX(sw t1,(SC_FPC_CSR)(a0)) cfc1 t0,$0 # implementation/version jr ra + .set pop .set nomacro EX(sw t0,(SC_FPC_EIR)(a0)) .set macro @@ -80,6 +83,8 @@ LEAF(_save_fp_context) * stack frame which might have been changed by the user. */ LEAF(_restore_fp_context) + .set push + SET_HARDFLOAT li v0, 0 # assume success EX(lw t0,(SC_FPC_CSR)(a0)) EX(lwc1 $f0,(SC_FPREGS+0)(a0)) @@ -116,6 +121,7 @@ LEAF(_restore_fp_context) EX(lwc1 $f31,(SC_FPREGS+248)(a0)) jr ra ctc1 t0,fcr31 + .set pop END(_restore_fp_context) .set reorder diff --git a/arch/mips/kernel/r2300_switch.S b/arch/mips/kernel/r2300_switch.S index 20b7b04..435ea65 100644 --- a/arch/mips/kernel/r2300_switch.S +++ b/arch/mips/kernel/r2300_switch.S @@ -120,6 +120,9 @@ LEAF(_restore_fp) #define FPU_DEFAULT 0x00000000 + .set push + SET_HARDFLOAT + LEAF(_init_fpu) mfc0 t0, CP0_STATUS li t1, ST0_CU1 @@ -165,3 +168,5 @@ LEAF(_init_fpu) mtc1 t0, $f31 jr ra END(_init_fpu) + + .set pop diff --git a/arch/mips/kernel/r4k_fpu.S b/arch/mips/kernel/r4k_fpu.S index 8352523..6c160c6 100644 --- a/arch/mips/kernel/r4k_fpu.S +++ b/arch/mips/kernel/r4k_fpu.S @@ -19,8 +19,12 @@ #include <asm/asm-offsets.h> #include <asm/regdef.h> +/* preprocessor replaces the fp in ".set fp=64" with $30 otherwise */ +#undef fp + .macro EX insn, reg, src .set push + SET_HARDFLOAT .set nomacro .ex\@: \insn \reg, \src .set pop @@ -33,12 +37,17 @@ .set arch=r4000 LEAF(_save_fp_context) + .set push + SET_HARDFLOAT cfc1 t1, fcr31 + .set pop #if defined(CONFIG_64BIT) || defined(CONFIG_CPU_MIPS32_R2) .set push + SET_HARDFLOAT #ifdef CONFIG_CPU_MIPS32_R2 - .set mips64r2 + .set mips32r2 + .set fp=64 mfc0 t0, CP0_STATUS sll t0, t0, 5 bgez t0, 1f # skip storing odd if FR=0 @@ -64,6 +73,8 @@ LEAF(_save_fp_context) 1: .set pop #endif + .set push + SET_HARDFLOAT /* Store the 16 even double precision registers */ EX sdc1 $f0, SC_FPREGS+0(a0) EX sdc1 $f2, SC_FPREGS+16(a0) @@ -84,11 +95,14 @@ LEAF(_save_fp_context) EX sw t1, SC_FPC_CSR(a0) jr ra li v0, 0 # success + .set pop END(_save_fp_context) #ifdef CONFIG_MIPS32_COMPAT /* Save 32-bit process floating point context */ LEAF(_save_fp_context32) + .set push + SET_HARDFLOAT cfc1 t1, fcr31 mfc0 t0, CP0_STATUS @@ -134,6 +148,7 @@ LEAF(_save_fp_context32) EX sw t1, SC32_FPC_CSR(a0) cfc1 t0, $0 # implementation/version EX sw t0, SC32_FPC_EIR(a0) + .set pop jr ra li v0, 0 # success @@ -150,8 +165,10 @@ LEAF(_restore_fp_context) #if defined(CONFIG_64BIT) || defined(CONFIG_CPU_MIPS32_R2) .set push + SET_HARDFLOAT #ifdef CONFIG_CPU_MIPS32_R2 - .set mips64r2 + .set mips32r2 + .set fp=64 mfc0 t0, CP0_STATUS sll t0, t0, 5 bgez t0, 1f # skip loading odd if FR=0 @@ -175,6 +192,8 @@ LEAF(_restore_fp_context) EX ldc1 $f31, SC_FPREGS+248(a0) 1: .set pop #endif + .set push + SET_HARDFLOAT EX ldc1 $f0, SC_FPREGS+0(a0) EX ldc1 $f2, SC_FPREGS+16(a0) EX ldc1 $f4, SC_FPREGS+32(a0) @@ -192,6 +211,7 @@ LEAF(_restore_fp_context) EX ldc1 $f28, SC_FPREGS+224(a0) EX ldc1 $f30, SC_FPREGS+240(a0) ctc1 t1, fcr31 + .set pop jr ra li v0, 0 # success END(_restore_fp_context) @@ -199,6 +219,8 @@ LEAF(_restore_fp_context) #ifdef CONFIG_MIPS32_COMPAT LEAF(_restore_fp_context32) /* Restore an o32 sigcontext. */ + .set push + SET_HARDFLOAT EX lw t1, SC32_FPC_CSR(a0) mfc0 t0, CP0_STATUS @@ -242,6 +264,7 @@ LEAF(_restore_fp_context32) ctc1 t1, fcr31 jr ra li v0, 0 # success + .set pop END(_restore_fp_context32) #endif diff --git a/arch/mips/kernel/r4k_switch.S b/arch/mips/kernel/r4k_switch.S index 4c4ec18..64591e6 100644 --- a/arch/mips/kernel/r4k_switch.S +++ b/arch/mips/kernel/r4k_switch.S @@ -22,6 +22,9 @@ #include <asm/asmmacro.h> +/* preprocessor replaces the fp in ".set fp=64" with $30 otherwise */ +#undef fp + /* * Offset to the current process status flags, the first 32 bytes of the * stack are not used. @@ -65,8 +68,12 @@ bgtz a3, 1f /* Save 128b MSA vector context + scalar FP control & status. */ + .set push + SET_HARDFLOAT cfc1 t1, fcr31 msa_save_all a0 + .set pop /* SET_HARDFLOAT */ + sw t1, THREAD_FCR31(a0) b 2f @@ -161,6 +168,9 @@ LEAF(_init_msa_upper) #define FPU_DEFAULT 0x00000000 + .set push + SET_HARDFLOAT + LEAF(_init_fpu) mfc0 t0, CP0_STATUS li t1, ST0_CU1 @@ -232,7 +242,8 @@ LEAF(_init_fpu) #ifdef CONFIG_CPU_MIPS32_R2 .set push - .set mips64r2 + .set mips32r2 + .set fp=64 sll t0, t0, 5 # is Status.FR set? bgez t0, 1f # no: skip setting upper 32b @@ -291,3 +302,5 @@ LEAF(_init_fpu) #endif jr ra END(_init_fpu) + + .set pop /* SET_HARDFLOAT */ diff --git a/arch/mips/kernel/r6000_fpu.S b/arch/mips/kernel/r6000_fpu.S index da0fbe4..4707738 100644 --- a/arch/mips/kernel/r6000_fpu.S +++ b/arch/mips/kernel/r6000_fpu.S @@ -18,6 +18,9 @@ .set noreorder .set mips2 + .set push + SET_HARDFLOAT + /* Save floating point context */ LEAF(_save_fp_context) mfc0 t0,CP0_STATUS @@ -85,3 +88,5 @@ 1: jr ra nop END(_restore_fp_context) + + .set pop /* SET_HARDFLOAT */ diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S index 744cd10..00cad10 100644 --- a/arch/mips/kernel/scall32-o32.S +++ b/arch/mips/kernel/scall32-o32.S @@ -579,3 +579,4 @@ EXPORT(sys_call_table) PTR sys_seccomp PTR sys_getrandom PTR sys_memfd_create + PTR sys_bpf /* 4355 */ diff --git a/arch/mips/kernel/scall64-64.S b/arch/mips/kernel/scall64-64.S index 002b1bc..5251565 100644 --- a/arch/mips/kernel/scall64-64.S +++ b/arch/mips/kernel/scall64-64.S @@ -434,4 +434,5 @@ EXPORT(sys_call_table) PTR sys_seccomp PTR sys_getrandom PTR sys_memfd_create + PTR sys_bpf /* 5315 */ .size sys_call_table,.-sys_call_table diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S index ca6cbbe..77e7439 100644 --- a/arch/mips/kernel/scall64-n32.S +++ b/arch/mips/kernel/scall64-n32.S @@ -427,4 +427,5 @@ EXPORT(sysn32_call_table) PTR sys_seccomp PTR sys_getrandom PTR sys_memfd_create + PTR sys_bpf .size sysn32_call_table,.-sysn32_call_table diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S index 9e10d11..6f8db9f 100644 --- a/arch/mips/kernel/scall64-o32.S +++ b/arch/mips/kernel/scall64-o32.S @@ -564,4 +564,5 @@ EXPORT(sys32_call_table) PTR sys_seccomp PTR sys_getrandom PTR sys_memfd_create + PTR sys_bpf /* 4355 */ .size sys32_call_table,.-sys32_call_table diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c index b3b8f0d..d21ec57 100644 --- a/arch/mips/kernel/setup.c +++ b/arch/mips/kernel/setup.c @@ -683,7 +683,8 @@ static void __init arch_mem_init(char **cmdline_p) dma_contiguous_reserve(PFN_PHYS(max_low_pfn)); /* Tell bootmem about cma reserved memblock section */ for_each_memblock(reserved, reg) - reserve_bootmem(reg->base, reg->size, BOOTMEM_DEFAULT); + if (reg->size != 0) + reserve_bootmem(reg->base, reg->size, BOOTMEM_DEFAULT); } static void __init resource_init(void) diff --git a/arch/mips/lib/r3k_dump_tlb.c b/arch/mips/lib/r3k_dump_tlb.c index 91615c2..1ef365a 100644 --- a/arch/mips/lib/r3k_dump_tlb.c +++ b/arch/mips/lib/r3k_dump_tlb.c @@ -34,7 +34,7 @@ static void dump_tlb(int first, int last) entrylo0 = read_c0_entrylo0(); /* Unused entries have a virtual address of KSEG0. */ - if ((entryhi & 0xffffe000) != 0x80000000 + if ((entryhi & 0xfffff000) != 0x80000000 && (entryhi & 0xfc0) == asid) { /* * Only print entries in use @@ -43,7 +43,7 @@ static void dump_tlb(int first, int last) printk("va=%08lx asid=%08lx" " [pa=%06lx n=%d d=%d v=%d g=%d]", - (entryhi & 0xffffe000), + (entryhi & 0xfffff000), entryhi & 0xfc0, entrylo0 & PAGE_MASK, (entrylo0 & (1 << 11)) ? 1 : 0, diff --git a/arch/mips/lib/strnlen_user.S b/arch/mips/lib/strnlen_user.S index f3af699..7d12c0d 100644 --- a/arch/mips/lib/strnlen_user.S +++ b/arch/mips/lib/strnlen_user.S @@ -40,9 +40,11 @@ FEXPORT(__strnlen_\func\()_nocheck_asm) .else EX(lbe, t0, (v0), .Lfault\@) .endif - PTR_ADDIU v0, 1 + .set noreorder bnez t0, 1b -1: PTR_SUBU v0, a0 +1: PTR_ADDIU v0, 1 + .set reorder + PTR_SUBU v0, a0 jr ra END(__strnlen_\func\()_asm) diff --git a/arch/mips/math-emu/cp1emu.c b/arch/mips/math-emu/cp1emu.c index 51a0fde..cac529a 100644 --- a/arch/mips/math-emu/cp1emu.c +++ b/arch/mips/math-emu/cp1emu.c @@ -584,11 +584,7 @@ static int isBranchInstr(struct pt_regs *regs, struct mm_decoded_insn dec_insn, if (insn.i_format.rs == bc_op) { preempt_disable(); if (is_fpu_owner()) - asm volatile( - ".set push\n" - "\t.set mips1\n" - "\tcfc1\t%0,$31\n" - "\t.set pop" : "=r" (fcr31)); + fcr31 = read_32bit_cp1_register(CP1_STATUS); else fcr31 = current->thread.fpu.fcr31; preempt_enable(); diff --git a/arch/mips/pci/msi-xlp.c b/arch/mips/pci/msi-xlp.c index fa374fe..f7ac3ed 100644 --- a/arch/mips/pci/msi-xlp.c +++ b/arch/mips/pci/msi-xlp.c @@ -443,10 +443,8 @@ static int xlp_setup_msix(uint64_t lnkbase, int node, int link, msg.data = 0xc00 | msixvec; ret = irq_set_msi_desc(xirq, desc); - if (ret < 0) { - destroy_irq(xirq); + if (ret < 0) return ret; - } write_msi_msg(xirq, &msg); return 0; diff --git a/arch/powerpc/include/asm/fadump.h b/arch/powerpc/include/asm/fadump.h index a677456..493e72f 100644 --- a/arch/powerpc/include/asm/fadump.h +++ b/arch/powerpc/include/asm/fadump.h @@ -70,39 +70,39 @@ #define CPU_UNKNOWN (~((u32)0)) /* Utility macros */ -#define SKIP_TO_NEXT_CPU(reg_entry) \ -({ \ - while (reg_entry->reg_id != REG_ID("CPUEND")) \ - reg_entry++; \ - reg_entry++; \ +#define SKIP_TO_NEXT_CPU(reg_entry) \ +({ \ + while (be64_to_cpu(reg_entry->reg_id) != REG_ID("CPUEND")) \ + reg_entry++; \ + reg_entry++; \ }) /* Kernel Dump section info */ struct fadump_section { - u32 request_flag; - u16 source_data_type; - u16 error_flags; - u64 source_address; - u64 source_len; - u64 bytes_dumped; - u64 destination_address; + __be32 request_flag; + __be16 source_data_type; + __be16 error_flags; + __be64 source_address; + __be64 source_len; + __be64 bytes_dumped; + __be64 destination_address; }; /* ibm,configure-kernel-dump header. */ struct fadump_section_header { - u32 dump_format_version; - u16 dump_num_sections; - u16 dump_status_flag; - u32 offset_first_dump_section; + __be32 dump_format_version; + __be16 dump_num_sections; + __be16 dump_status_flag; + __be32 offset_first_dump_section; /* Fields for disk dump option. */ - u32 dd_block_size; - u64 dd_block_offset; - u64 dd_num_blocks; - u32 dd_offset_disk_path; + __be32 dd_block_size; + __be64 dd_block_offset; + __be64 dd_num_blocks; + __be32 dd_offset_disk_path; /* Maximum time allowed to prevent an automatic dump-reboot. */ - u32 max_time_auto; + __be32 max_time_auto; }; /* @@ -174,15 +174,15 @@ static inline u64 str_to_u64(const char *str) /* Register save area header. */ struct fadump_reg_save_area_header { - u64 magic_number; - u32 version; - u32 num_cpu_offset; + __be64 magic_number; + __be32 version; + __be32 num_cpu_offset; }; /* Register entry. */ struct fadump_reg_entry { - u64 reg_id; - u64 reg_value; + __be64 reg_id; + __be64 reg_value; }; /* fadump crash info structure */ diff --git a/arch/powerpc/kernel/entry_64.S b/arch/powerpc/kernel/entry_64.S index 5bbd1bc..0905c8d 100644 --- a/arch/powerpc/kernel/entry_64.S +++ b/arch/powerpc/kernel/entry_64.S @@ -659,7 +659,13 @@ _GLOBAL(ret_from_except_lite) 3: #endif bl save_nvgprs + /* + * Use a non volatile GPR to save and restore our thread_info flags + * across the call to restore_interrupts. + */ + mr r30,r4 bl restore_interrupts + mr r4,r30 addi r3,r1,STACK_FRAME_OVERHEAD bl do_notify_resume b ret_from_except diff --git a/arch/powerpc/kernel/fadump.c b/arch/powerpc/kernel/fadump.c index 742694c..26d091a 100644 --- a/arch/powerpc/kernel/fadump.c +++ b/arch/powerpc/kernel/fadump.c @@ -58,7 +58,7 @@ int __init early_init_dt_scan_fw_dump(unsigned long node, const __be32 *sections; int i, num_sections; int size; - const int *token; + const __be32 *token; if (depth != 1 || strcmp(uname, "rtas") != 0) return 0; @@ -72,7 +72,7 @@ int __init early_init_dt_scan_fw_dump(unsigned long node, return 1; fw_dump.fadump_supported = 1; - fw_dump.ibm_configure_kernel_dump = *token; + fw_dump.ibm_configure_kernel_dump = be32_to_cpu(*token); /* * The 'ibm,kernel-dump' rtas node is present only if there is @@ -147,11 +147,11 @@ static unsigned long init_fadump_mem_struct(struct fadump_mem_struct *fdm, memset(fdm, 0, sizeof(struct fadump_mem_struct)); addr = addr & PAGE_MASK; - fdm->header.dump_format_version = 0x00000001; - fdm->header.dump_num_sections = 3; + fdm->header.dump_format_version = cpu_to_be32(0x00000001); + fdm->header.dump_num_sections = cpu_to_be16(3); fdm->header.dump_status_flag = 0; fdm->header.offset_first_dump_section = - (u32)offsetof(struct fadump_mem_struct, cpu_state_data); + cpu_to_be32((u32)offsetof(struct fadump_mem_struct, cpu_state_data)); /* * Fields for disk dump option. @@ -167,27 +167,27 @@ static unsigned long init_fadump_mem_struct(struct fadump_mem_struct *fdm, /* Kernel dump sections */ /* cpu state data section. */ - fdm->cpu_state_data.request_flag = FADUMP_REQUEST_FLAG; - fdm->cpu_state_data.source_data_type = FADUMP_CPU_STATE_DATA; + fdm->cpu_state_data.request_flag = cpu_to_be32(FADUMP_REQUEST_FLAG); + fdm->cpu_state_data.source_data_type = cpu_to_be16(FADUMP_CPU_STATE_DATA); fdm->cpu_state_data.source_address = 0; - fdm->cpu_state_data.source_len = fw_dump.cpu_state_data_size; - fdm->cpu_state_data.destination_address = addr; + fdm->cpu_state_data.source_len = cpu_to_be64(fw_dump.cpu_state_data_size); + fdm->cpu_state_data.destination_address = cpu_to_be64(addr); addr += fw_dump.cpu_state_data_size; /* hpte region section */ - fdm->hpte_region.request_flag = FADUMP_REQUEST_FLAG; - fdm->hpte_region.source_data_type = FADUMP_HPTE_REGION; + fdm->hpte_region.request_flag = cpu_to_be32(FADUMP_REQUEST_FLAG); + fdm->hpte_region.source_data_type = cpu_to_be16(FADUMP_HPTE_REGION); fdm->hpte_region.source_address = 0; - fdm->hpte_region.source_len = fw_dump.hpte_region_size; - fdm->hpte_region.destination_address = addr; + fdm->hpte_region.source_len = cpu_to_be64(fw_dump.hpte_region_size); + fdm->hpte_region.destination_address = cpu_to_be64(addr); addr += fw_dump.hpte_region_size; /* RMA region section */ - fdm->rmr_region.request_flag = FADUMP_REQUEST_FLAG; - fdm->rmr_region.source_data_type = FADUMP_REAL_MODE_REGION; - fdm->rmr_region.source_address = RMA_START; - fdm->rmr_region.source_len = fw_dump.boot_memory_size; - fdm->rmr_region.destination_address = addr; + fdm->rmr_region.request_flag = cpu_to_be32(FADUMP_REQUEST_FLAG); + fdm->rmr_region.source_data_type = cpu_to_be16(FADUMP_REAL_MODE_REGION); + fdm->rmr_region.source_address = cpu_to_be64(RMA_START); + fdm->rmr_region.source_len = cpu_to_be64(fw_dump.boot_memory_size); + fdm->rmr_region.destination_address = cpu_to_be64(addr); addr += fw_dump.boot_memory_size; return addr; @@ -272,7 +272,7 @@ int __init fadump_reserve_mem(void) * first kernel. */ if (fdm_active) - fw_dump.boot_memory_size = fdm_active->rmr_region.source_len; + fw_dump.boot_memory_size = be64_to_cpu(fdm_active->rmr_region.source_len); else fw_dump.boot_memory_size = fadump_calculate_reserve_size(); @@ -314,8 +314,8 @@ int __init fadump_reserve_mem(void) (unsigned long)(base >> 20)); fw_dump.fadumphdr_addr = - fdm_active->rmr_region.destination_address + - fdm_active->rmr_region.source_len; + be64_to_cpu(fdm_active->rmr_region.destination_address) + + be64_to_cpu(fdm_active->rmr_region.source_len); pr_debug("fadumphdr_addr = %p\n", (void *) fw_dump.fadumphdr_addr); } else { @@ -472,9 +472,9 @@ fadump_read_registers(struct fadump_reg_entry *reg_entry, struct pt_regs *regs) { memset(regs, 0, sizeof(struct pt_regs)); - while (reg_entry->reg_id != REG_ID("CPUEND")) { - fadump_set_regval(regs, reg_entry->reg_id, - reg_entry->reg_value); + while (be64_to_cpu(reg_entry->reg_id) != REG_ID("CPUEND")) { + fadump_set_regval(regs, be64_to_cpu(reg_entry->reg_id), + be64_to_cpu(reg_entry->reg_value)); reg_entry++; } reg_entry++; @@ -603,20 +603,20 @@ static int __init fadump_build_cpu_notes(const struct fadump_mem_struct *fdm) if (!fdm->cpu_state_data.bytes_dumped) return -EINVAL; - addr = fdm->cpu_state_data.destination_address; + addr = be64_to_cpu(fdm->cpu_state_data.destination_address); vaddr = __va(addr); reg_header = vaddr; - if (reg_header->magic_number != REGSAVE_AREA_MAGIC) { + if (be64_to_cpu(reg_header->magic_number) != REGSAVE_AREA_MAGIC) { printk(KERN_ERR "Unable to read register save area.\n"); return -ENOENT; } pr_debug("--------CPU State Data------------\n"); - pr_debug("Magic Number: %llx\n", reg_header->magic_number); - pr_debug("NumCpuOffset: %x\n", reg_header->num_cpu_offset); + pr_debug("Magic Number: %llx\n", be64_to_cpu(reg_header->magic_number)); + pr_debug("NumCpuOffset: %x\n", be32_to_cpu(reg_header->num_cpu_offset)); - vaddr += reg_header->num_cpu_offset; - num_cpus = *((u32 *)(vaddr)); + vaddr += be32_to_cpu(reg_header->num_cpu_offset); + num_cpus = be32_to_cpu(*((__be32 *)(vaddr))); pr_debug("NumCpus : %u\n", num_cpus); vaddr += sizeof(u32); reg_entry = (struct fadump_reg_entry *)vaddr; @@ -639,13 +639,13 @@ static int __init fadump_build_cpu_notes(const struct fadump_mem_struct *fdm) fdh = __va(fw_dump.fadumphdr_addr); for (i = 0; i < num_cpus; i++) { - if (reg_entry->reg_id != REG_ID("CPUSTRT")) { + if (be64_to_cpu(reg_entry->reg_id) != REG_ID("CPUSTRT")) { printk(KERN_ERR "Unable to read CPU state data\n"); rc = -ENOENT; goto error_out; } /* Lower 4 bytes of reg_value contains logical cpu id */ - cpu = reg_entry->reg_value & FADUMP_CPU_ID_MASK; + cpu = be64_to_cpu(reg_entry->reg_value) & FADUMP_CPU_ID_MASK; if (fdh && !cpumask_test_cpu(cpu, &fdh->cpu_online_mask)) { SKIP_TO_NEXT_CPU(reg_entry); continue; @@ -692,7 +692,7 @@ static int __init process_fadump(const struct fadump_mem_struct *fdm_active) return -EINVAL; /* Check if the dump data is valid. */ - if ((fdm_active->header.dump_status_flag == FADUMP_ERROR_FLAG) || + if ((be16_to_cpu(fdm_active->header.dump_status_flag) == FADUMP_ERROR_FLAG) || (fdm_active->cpu_state_data.error_flags != 0) || (fdm_active->rmr_region.error_flags != 0)) { printk(KERN_ERR "Dump taken by platform is not valid\n"); @@ -828,7 +828,7 @@ static void fadump_setup_crash_memory_ranges(void) static inline unsigned long fadump_relocate(unsigned long paddr) { if (paddr > RMA_START && paddr < fw_dump.boot_memory_size) - return fdm.rmr_region.destination_address + paddr; + return be64_to_cpu(fdm.rmr_region.destination_address) + paddr; else return paddr; } @@ -902,7 +902,7 @@ static int fadump_create_elfcore_headers(char *bufp) * to the specified destination_address. Hence set * the correct offset. */ - phdr->p_offset = fdm.rmr_region.destination_address; + phdr->p_offset = be64_to_cpu(fdm.rmr_region.destination_address); } phdr->p_paddr = mbase; @@ -951,7 +951,7 @@ static void register_fadump(void) fadump_setup_crash_memory_ranges(); - addr = fdm.rmr_region.destination_address + fdm.rmr_region.source_len; + addr = be64_to_cpu(fdm.rmr_region.destination_address) + be64_to_cpu(fdm.rmr_region.source_len); /* Initialize fadump crash info header. */ addr = init_fadump_header(addr); vaddr = __va(addr); @@ -1023,7 +1023,7 @@ void fadump_cleanup(void) /* Invalidate the registration only if dump is active. */ if (fw_dump.dump_active) { init_fadump_mem_struct(&fdm, - fdm_active->cpu_state_data.destination_address); + be64_to_cpu(fdm_active->cpu_state_data.destination_address)); fadump_invalidate_dump(&fdm); } } @@ -1063,7 +1063,7 @@ static void fadump_invalidate_release_mem(void) return; } - destination_address = fdm_active->cpu_state_data.destination_address; + destination_address = be64_to_cpu(fdm_active->cpu_state_data.destination_address); fadump_cleanup(); mutex_unlock(&fadump_mutex); @@ -1183,31 +1183,31 @@ static int fadump_region_show(struct seq_file *m, void *private) seq_printf(m, "CPU : [%#016llx-%#016llx] %#llx bytes, " "Dumped: %#llx\n", - fdm_ptr->cpu_state_data.destination_address, - fdm_ptr->cpu_state_data.destination_address + - fdm_ptr->cpu_state_data.source_len - 1, - fdm_ptr->cpu_state_data.source_len, - fdm_ptr->cpu_state_data.bytes_dumped); + be64_to_cpu(fdm_ptr->cpu_state_data.destination_address), + be64_to_cpu(fdm_ptr->cpu_state_data.destination_address) + + be64_to_cpu(fdm_ptr->cpu_state_data.source_len) - 1, + be64_to_cpu(fdm_ptr->cpu_state_data.source_len), + be64_to_cpu(fdm_ptr->cpu_state_data.bytes_dumped)); seq_printf(m, "HPTE: [%#016llx-%#016llx] %#llx bytes, " "Dumped: %#llx\n", - fdm_ptr->hpte_region.destination_address, - fdm_ptr->hpte_region.destination_address + - fdm_ptr->hpte_region.source_len - 1, - fdm_ptr->hpte_region.source_len, - fdm_ptr->hpte_region.bytes_dumped); + be64_to_cpu(fdm_ptr->hpte_region.destination_address), + be64_to_cpu(fdm_ptr->hpte_region.destination_address) + + be64_to_cpu(fdm_ptr->hpte_region.source_len) - 1, + be64_to_cpu(fdm_ptr->hpte_region.source_len), + be64_to_cpu(fdm_ptr->hpte_region.bytes_dumped)); seq_printf(m, "DUMP: [%#016llx-%#016llx] %#llx bytes, " "Dumped: %#llx\n", - fdm_ptr->rmr_region.destination_address, - fdm_ptr->rmr_region.destination_address + - fdm_ptr->rmr_region.source_len - 1, - fdm_ptr->rmr_region.source_len, - fdm_ptr->rmr_region.bytes_dumped); + be64_to_cpu(fdm_ptr->rmr_region.destination_address), + be64_to_cpu(fdm_ptr->rmr_region.destination_address) + + be64_to_cpu(fdm_ptr->rmr_region.source_len) - 1, + be64_to_cpu(fdm_ptr->rmr_region.source_len), + be64_to_cpu(fdm_ptr->rmr_region.bytes_dumped)); if (!fdm_active || (fw_dump.reserve_dump_area_start == - fdm_ptr->cpu_state_data.destination_address)) + be64_to_cpu(fdm_ptr->cpu_state_data.destination_address))) goto out; /* Dump is active. Show reserved memory region. */ @@ -1215,10 +1215,10 @@ static int fadump_region_show(struct seq_file *m, void *private) " : [%#016llx-%#016llx] %#llx bytes, " "Dumped: %#llx\n", (unsigned long long)fw_dump.reserve_dump_area_start, - fdm_ptr->cpu_state_data.destination_address - 1, - fdm_ptr->cpu_state_data.destination_address - + be64_to_cpu(fdm_ptr->cpu_state_data.destination_address) - 1, + be64_to_cpu(fdm_ptr->cpu_state_data.destination_address) - fw_dump.reserve_dump_area_start, - fdm_ptr->cpu_state_data.destination_address - + be64_to_cpu(fdm_ptr->cpu_state_data.destination_address) - fw_dump.reserve_dump_area_start); out: if (fdm_active) diff --git a/arch/powerpc/mm/init_32.c b/arch/powerpc/mm/init_32.c index cad68ff..415a51b 100644 --- a/arch/powerpc/mm/init_32.c +++ b/arch/powerpc/mm/init_32.c @@ -103,7 +103,7 @@ unsigned long __max_low_memory = MAX_LOW_MEM; /* * Check for command-line options that affect what MMU_init will do. */ -void MMU_setup(void) +void __init MMU_setup(void) { /* Check for nobats option (used in mapin_ram). */ if (strstr(boot_command_line, "nobats")) { diff --git a/arch/powerpc/platforms/powernv/opal-lpc.c b/arch/powerpc/platforms/powernv/opal-lpc.c index ad4b31d..e4169d6 100644 --- a/arch/powerpc/platforms/powernv/opal-lpc.c +++ b/arch/powerpc/platforms/powernv/opal-lpc.c @@ -216,14 +216,54 @@ static ssize_t lpc_debug_read(struct file *filp, char __user *ubuf, &data, len); if (rc) return -ENXIO; + + /* + * Now there is some trickery with the data returned by OPAL + * as it's the desired data right justified in a 32-bit BE + * word. + * + * This is a very bad interface and I'm to blame for it :-( + * + * So we can't just apply a 32-bit swap to what comes from OPAL, + * because user space expects the *bytes* to be in their proper + * respective positions (ie, LPC position). + * + * So what we really want to do here is to shift data right + * appropriately on a LE kernel. + * + * IE. If the LPC transaction has bytes B0, B1, B2 and B3 in that + * order, we have in memory written to by OPAL at the "data" + * pointer: + * + * Bytes: OPAL "data" LE "data" + * 32-bit: B0 B1 B2 B3 B0B1B2B3 B3B2B1B0 + * 16-bit: B0 B1 0000B0B1 B1B00000 + * 8-bit: B0 000000B0 B0000000 + * + * So a BE kernel will have the leftmost of the above in the MSB + * and rightmost in the LSB and can just then "cast" the u32 "data" + * down to the appropriate quantity and write it. + * + * However, an LE kernel can't. It doesn't need to swap because a + * load from data followed by a store to user are going to preserve + * the byte ordering which is the wire byte order which is what the + * user wants, but in order to "crop" to the right size, we need to + * shift right first. + */ switch(len) { case 4: rc = __put_user((u32)data, (u32 __user *)ubuf); break; case 2: +#ifdef __LITTLE_ENDIAN__ + data >>= 16; +#endif rc = __put_user((u16)data, (u16 __user *)ubuf); break; default: +#ifdef __LITTLE_ENDIAN__ + data >>= 24; +#endif rc = __put_user((u8)data, (u8 __user *)ubuf); break; } @@ -263,12 +303,31 @@ static ssize_t lpc_debug_write(struct file *filp, const char __user *ubuf, else if (todo > 1 && (pos & 1) == 0) len = 2; } + + /* + * Similarly to the read case, we have some trickery here but + * it's different to handle. We need to pass the value to OPAL in + * a register whose layout depends on the access size. We want + * to reproduce the memory layout of the user, however we aren't + * doing a load from user and a store to another memory location + * which would achieve that. Here we pass the value to OPAL via + * a register which is expected to contain the "BE" interpretation + * of the byte sequence. IE: for a 32-bit access, byte 0 should be + * in the MSB. So here we *do* need to byteswap on LE. + * + * User bytes: LE "data" OPAL "data" + * 32-bit: B0 B1 B2 B3 B3B2B1B0 B0B1B2B3 + * 16-bit: B0 B1 0000B1B0 0000B0B1 + * 8-bit: B0 000000B0 000000B0 + */ switch(len) { case 4: rc = __get_user(data, (u32 __user *)ubuf); + data = cpu_to_be32(data); break; case 2: rc = __get_user(data, (u16 __user *)ubuf); + data = cpu_to_be16(data); break; default: rc = __get_user(data, (u8 __user *)ubuf); diff --git a/arch/powerpc/platforms/pseries/dlpar.c b/arch/powerpc/platforms/pseries/dlpar.c index 6ad83bd..c22bb1b 100644 --- a/arch/powerpc/platforms/pseries/dlpar.c +++ b/arch/powerpc/platforms/pseries/dlpar.c @@ -382,7 +382,7 @@ static int dlpar_online_cpu(struct device_node *dn) BUG_ON(get_cpu_current_state(cpu) != CPU_STATE_OFFLINE); cpu_maps_update_done(); - rc = cpu_up(cpu); + rc = device_online(get_cpu_device(cpu)); if (rc) goto out; cpu_maps_update_begin(); @@ -467,7 +467,7 @@ static int dlpar_offline_cpu(struct device_node *dn) if (get_cpu_current_state(cpu) == CPU_STATE_ONLINE) { set_preferred_offline_state(cpu, CPU_STATE_OFFLINE); cpu_maps_update_done(); - rc = cpu_down(cpu); + rc = device_offline(get_cpu_device(cpu)); if (rc) goto out; cpu_maps_update_begin(); diff --git a/arch/powerpc/platforms/pseries/lpar.c b/arch/powerpc/platforms/pseries/lpar.c index 8c509d5..f6880d2 100644 --- a/arch/powerpc/platforms/pseries/lpar.c +++ b/arch/powerpc/platforms/pseries/lpar.c @@ -43,6 +43,7 @@ #include <asm/trace.h> #include <asm/firmware.h> #include <asm/plpar_wrappers.h> +#include <asm/fadump.h> #include "pseries.h" @@ -247,8 +248,17 @@ static void pSeries_lpar_hptab_clear(void) } #ifdef __LITTLE_ENDIAN__ - /* Reset exceptions to big endian */ - if (firmware_has_feature(FW_FEATURE_SET_MODE)) { + /* + * Reset exceptions to big endian. + * + * FIXME this is a hack for kexec, we need to reset the exception + * endian before starting the new kernel and this is a convenient place + * to do it. + * + * This is also called on boot when a fadump happens. In that case we + * must not change the exception endian mode. + */ + if (firmware_has_feature(FW_FEATURE_SET_MODE) && !is_fadump_active()) { long rc; rc = pseries_big_endian_exceptions(); diff --git a/arch/s390/configs/default_defconfig b/arch/s390/configs/default_defconfig index 9d94fdd..9432d0f 100644 --- a/arch/s390/configs/default_defconfig +++ b/arch/s390/configs/default_defconfig @@ -35,7 +35,6 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y -CONFIG_BLK_DEV_INTEGRITY=y CONFIG_BLK_DEV_THROTTLING=y CONFIG_PARTITION_ADVANCED=y CONFIG_IBM_PARTITION=y @@ -245,6 +244,7 @@ CONFIG_NF_TABLES_IPV4=m CONFIG_NFT_CHAIN_ROUTE_IPV4=m CONFIG_NFT_CHAIN_NAT_IPV4=m CONFIG_NF_TABLES_ARP=m +CONFIG_NF_NAT_IPV4=m CONFIG_IP_NF_IPTABLES=m CONFIG_IP_NF_MATCH_AH=m CONFIG_IP_NF_MATCH_ECN=m @@ -252,11 +252,6 @@ CONFIG_IP_NF_MATCH_RPFILTER=m CONFIG_IP_NF_MATCH_TTL=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_NF_NAT_IPV4=m -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_REDIRECT=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_TARGET_ECN=m @@ -270,6 +265,7 @@ CONFIG_NF_CONNTRACK_IPV6=m CONFIG_NF_TABLES_IPV6=m CONFIG_NFT_CHAIN_ROUTE_IPV6=m CONFIG_NFT_CHAIN_NAT_IPV6=m +CONFIG_NF_NAT_IPV6=m CONFIG_IP6_NF_IPTABLES=m CONFIG_IP6_NF_MATCH_AH=m CONFIG_IP6_NF_MATCH_EUI64=m @@ -286,9 +282,6 @@ CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_RAW=m CONFIG_IP6_NF_SECURITY=m -CONFIG_NF_NAT_IPV6=m -CONFIG_IP6_NF_TARGET_MASQUERADE=m -CONFIG_IP6_NF_TARGET_NPT=m CONFIG_NF_TABLES_BRIDGE=m CONFIG_NET_SCTPPROBE=m CONFIG_RDS=m @@ -374,14 +367,13 @@ CONFIG_BLK_DEV_SR=m CONFIG_CHR_DEV_SG=y CONFIG_CHR_DEV_SCH=m CONFIG_SCSI_ENCLOSURE=m -CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_LOGGING=y CONFIG_SCSI_SPI_ATTRS=m +CONFIG_SCSI_FC_ATTRS=y CONFIG_SCSI_SAS_LIBSAS=m CONFIG_SCSI_SRP_ATTRS=m CONFIG_ISCSI_TCP=m -CONFIG_LIBFCOE=m CONFIG_SCSI_DEBUG=m CONFIG_ZFCP=y CONFIG_SCSI_VIRTIO=m @@ -427,7 +419,6 @@ CONFIG_VIRTIO_NET=m CONFIG_NLMON=m CONFIG_VHOST_NET=m # CONFIG_NET_VENDOR_ARC is not set -# CONFIG_NET_CADENCE is not set # CONFIG_NET_VENDOR_CHELSIO is not set # CONFIG_NET_VENDOR_INTEL is not set # CONFIG_NET_VENDOR_MARVELL is not set @@ -481,14 +472,14 @@ CONFIG_JFS_FS=m CONFIG_JFS_POSIX_ACL=y CONFIG_JFS_SECURITY=y CONFIG_JFS_STATISTICS=y -CONFIG_XFS_FS=m +CONFIG_XFS_FS=y CONFIG_XFS_QUOTA=y CONFIG_XFS_POSIX_ACL=y CONFIG_XFS_RT=y CONFIG_XFS_DEBUG=y CONFIG_GFS2_FS=m CONFIG_OCFS2_FS=m -CONFIG_BTRFS_FS=m +CONFIG_BTRFS_FS=y CONFIG_BTRFS_FS_POSIX_ACL=y CONFIG_NILFS2_FS=m CONFIG_FANOTIFY=y @@ -574,7 +565,6 @@ CONFIG_DEBUG_SHIRQ=y CONFIG_DETECT_HUNG_TASK=y CONFIG_TIMER_STATS=y CONFIG_DEBUG_RT_MUTEXES=y -CONFIG_RT_MUTEX_TESTER=y CONFIG_DEBUG_WW_MUTEX_SLOWPATH=y CONFIG_PROVE_LOCKING=y CONFIG_LOCK_STAT=y @@ -600,8 +590,13 @@ CONFIG_FAULT_INJECTION_DEBUG_FS=y CONFIG_FAULT_INJECTION_STACKTRACE_FILTER=y CONFIG_LATENCYTOP=y CONFIG_DEBUG_STRICT_USER_COPY_CHECKS=y +CONFIG_IRQSOFF_TRACER=y +CONFIG_PREEMPT_TRACER=y +CONFIG_SCHED_TRACER=y +CONFIG_FTRACE_SYSCALLS=y +CONFIG_STACK_TRACER=y CONFIG_BLK_DEV_IO_TRACE=y -# CONFIG_KPROBE_EVENT is not set +CONFIG_UPROBE_EVENT=y CONFIG_LKDTM=m CONFIG_TEST_LIST_SORT=y CONFIG_KPROBES_SANITY_TEST=y @@ -609,7 +604,10 @@ CONFIG_RBTREE_TEST=y CONFIG_INTERVAL_TREE_TEST=m CONFIG_PERCPU_TEST=m CONFIG_ATOMIC64_SELFTEST=y +CONFIG_TEST_STRING_HELPERS=y +CONFIG_TEST_KSTRTOX=y CONFIG_DMA_API_DEBUG=y +CONFIG_TEST_BPF=m # CONFIG_STRICT_DEVMEM is not set CONFIG_S390_PTDUMP=y CONFIG_ENCRYPTED_KEYS=m @@ -673,12 +671,6 @@ CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=m CONFIG_X509_CERTIFICATE_PARSER=m CONFIG_CRC7=m CONFIG_CRC8=m -CONFIG_XZ_DEC_X86=y -CONFIG_XZ_DEC_POWERPC=y -CONFIG_XZ_DEC_IA64=y -CONFIG_XZ_DEC_ARM=y -CONFIG_XZ_DEC_ARMTHUMB=y -CONFIG_XZ_DEC_SPARC=y CONFIG_CORDIC=m CONFIG_CMM=m CONFIG_APPLDATA_BASE=y diff --git a/arch/s390/configs/gcov_defconfig b/arch/s390/configs/gcov_defconfig index 90f514b..219dca6 100644 --- a/arch/s390/configs/gcov_defconfig +++ b/arch/s390/configs/gcov_defconfig @@ -35,7 +35,6 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y -CONFIG_BLK_DEV_INTEGRITY=y CONFIG_BLK_DEV_THROTTLING=y CONFIG_PARTITION_ADVANCED=y CONFIG_IBM_PARTITION=y @@ -243,6 +242,7 @@ CONFIG_NF_TABLES_IPV4=m CONFIG_NFT_CHAIN_ROUTE_IPV4=m CONFIG_NFT_CHAIN_NAT_IPV4=m CONFIG_NF_TABLES_ARP=m +CONFIG_NF_NAT_IPV4=m CONFIG_IP_NF_IPTABLES=m CONFIG_IP_NF_MATCH_AH=m CONFIG_IP_NF_MATCH_ECN=m @@ -250,11 +250,6 @@ CONFIG_IP_NF_MATCH_RPFILTER=m CONFIG_IP_NF_MATCH_TTL=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_NF_NAT_IPV4=m -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_REDIRECT=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_TARGET_ECN=m @@ -268,6 +263,7 @@ CONFIG_NF_CONNTRACK_IPV6=m CONFIG_NF_TABLES_IPV6=m CONFIG_NFT_CHAIN_ROUTE_IPV6=m CONFIG_NFT_CHAIN_NAT_IPV6=m +CONFIG_NF_NAT_IPV6=m CONFIG_IP6_NF_IPTABLES=m CONFIG_IP6_NF_MATCH_AH=m CONFIG_IP6_NF_MATCH_EUI64=m @@ -284,9 +280,6 @@ CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_RAW=m CONFIG_IP6_NF_SECURITY=m -CONFIG_NF_NAT_IPV6=m -CONFIG_IP6_NF_TARGET_MASQUERADE=m -CONFIG_IP6_NF_TARGET_NPT=m CONFIG_NF_TABLES_BRIDGE=m CONFIG_NET_SCTPPROBE=m CONFIG_RDS=m @@ -371,14 +364,13 @@ CONFIG_BLK_DEV_SR=m CONFIG_CHR_DEV_SG=y CONFIG_CHR_DEV_SCH=m CONFIG_SCSI_ENCLOSURE=m -CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_LOGGING=y CONFIG_SCSI_SPI_ATTRS=m +CONFIG_SCSI_FC_ATTRS=y CONFIG_SCSI_SAS_LIBSAS=m CONFIG_SCSI_SRP_ATTRS=m CONFIG_ISCSI_TCP=m -CONFIG_LIBFCOE=m CONFIG_SCSI_DEBUG=m CONFIG_ZFCP=y CONFIG_SCSI_VIRTIO=m @@ -424,7 +416,6 @@ CONFIG_VIRTIO_NET=m CONFIG_NLMON=m CONFIG_VHOST_NET=m # CONFIG_NET_VENDOR_ARC is not set -# CONFIG_NET_CADENCE is not set # CONFIG_NET_VENDOR_CHELSIO is not set # CONFIG_NET_VENDOR_INTEL is not set # CONFIG_NET_VENDOR_MARVELL is not set @@ -478,13 +469,13 @@ CONFIG_JFS_FS=m CONFIG_JFS_POSIX_ACL=y CONFIG_JFS_SECURITY=y CONFIG_JFS_STATISTICS=y -CONFIG_XFS_FS=m +CONFIG_XFS_FS=y CONFIG_XFS_QUOTA=y CONFIG_XFS_POSIX_ACL=y CONFIG_XFS_RT=y CONFIG_GFS2_FS=m CONFIG_OCFS2_FS=m -CONFIG_BTRFS_FS=m +CONFIG_BTRFS_FS=y CONFIG_BTRFS_FS_POSIX_ACL=y CONFIG_NILFS2_FS=m CONFIG_FANOTIFY=y @@ -626,12 +617,6 @@ CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=m CONFIG_X509_CERTIFICATE_PARSER=m CONFIG_CRC7=m CONFIG_CRC8=m -CONFIG_XZ_DEC_X86=y -CONFIG_XZ_DEC_POWERPC=y -CONFIG_XZ_DEC_IA64=y -CONFIG_XZ_DEC_ARM=y -CONFIG_XZ_DEC_ARMTHUMB=y -CONFIG_XZ_DEC_SPARC=y CONFIG_CORDIC=m CONFIG_CMM=m CONFIG_APPLDATA_BASE=y diff --git a/arch/s390/configs/performance_defconfig b/arch/s390/configs/performance_defconfig index 13559d3..822c2f2 100644 --- a/arch/s390/configs/performance_defconfig +++ b/arch/s390/configs/performance_defconfig @@ -33,7 +33,6 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y -CONFIG_BLK_DEV_INTEGRITY=y CONFIG_BLK_DEV_THROTTLING=y CONFIG_PARTITION_ADVANCED=y CONFIG_IBM_PARTITION=y @@ -241,6 +240,7 @@ CONFIG_NF_TABLES_IPV4=m CONFIG_NFT_CHAIN_ROUTE_IPV4=m CONFIG_NFT_CHAIN_NAT_IPV4=m CONFIG_NF_TABLES_ARP=m +CONFIG_NF_NAT_IPV4=m CONFIG_IP_NF_IPTABLES=m CONFIG_IP_NF_MATCH_AH=m CONFIG_IP_NF_MATCH_ECN=m @@ -248,11 +248,6 @@ CONFIG_IP_NF_MATCH_RPFILTER=m CONFIG_IP_NF_MATCH_TTL=m CONFIG_IP_NF_FILTER=m CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_ULOG=m -CONFIG_NF_NAT_IPV4=m -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_REDIRECT=m CONFIG_IP_NF_MANGLE=m CONFIG_IP_NF_TARGET_CLUSTERIP=m CONFIG_IP_NF_TARGET_ECN=m @@ -266,6 +261,7 @@ CONFIG_NF_CONNTRACK_IPV6=m CONFIG_NF_TABLES_IPV6=m CONFIG_NFT_CHAIN_ROUTE_IPV6=m CONFIG_NFT_CHAIN_NAT_IPV6=m +CONFIG_NF_NAT_IPV6=m CONFIG_IP6_NF_IPTABLES=m CONFIG_IP6_NF_MATCH_AH=m CONFIG_IP6_NF_MATCH_EUI64=m @@ -282,9 +278,6 @@ CONFIG_IP6_NF_TARGET_REJECT=m CONFIG_IP6_NF_MANGLE=m CONFIG_IP6_NF_RAW=m CONFIG_IP6_NF_SECURITY=m -CONFIG_NF_NAT_IPV6=m -CONFIG_IP6_NF_TARGET_MASQUERADE=m -CONFIG_IP6_NF_TARGET_NPT=m CONFIG_NF_TABLES_BRIDGE=m CONFIG_NET_SCTPPROBE=m CONFIG_RDS=m @@ -369,14 +362,13 @@ CONFIG_BLK_DEV_SR=m CONFIG_CHR_DEV_SG=y CONFIG_CHR_DEV_SCH=m CONFIG_SCSI_ENCLOSURE=m -CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_LOGGING=y CONFIG_SCSI_SPI_ATTRS=m +CONFIG_SCSI_FC_ATTRS=y CONFIG_SCSI_SAS_LIBSAS=m CONFIG_SCSI_SRP_ATTRS=m CONFIG_ISCSI_TCP=m -CONFIG_LIBFCOE=m CONFIG_SCSI_DEBUG=m CONFIG_ZFCP=y CONFIG_SCSI_VIRTIO=m @@ -422,7 +414,6 @@ CONFIG_VIRTIO_NET=m CONFIG_NLMON=m CONFIG_VHOST_NET=m # CONFIG_NET_VENDOR_ARC is not set -# CONFIG_NET_CADENCE is not set # CONFIG_NET_VENDOR_CHELSIO is not set # CONFIG_NET_VENDOR_INTEL is not set # CONFIG_NET_VENDOR_MARVELL is not set @@ -476,13 +467,13 @@ CONFIG_JFS_FS=m CONFIG_JFS_POSIX_ACL=y CONFIG_JFS_SECURITY=y CONFIG_JFS_STATISTICS=y -CONFIG_XFS_FS=m +CONFIG_XFS_FS=y CONFIG_XFS_QUOTA=y CONFIG_XFS_POSIX_ACL=y CONFIG_XFS_RT=y CONFIG_GFS2_FS=m CONFIG_OCFS2_FS=m -CONFIG_BTRFS_FS=m +CONFIG_BTRFS_FS=y CONFIG_BTRFS_FS_POSIX_ACL=y CONFIG_NILFS2_FS=m CONFIG_FANOTIFY=y @@ -550,8 +541,11 @@ CONFIG_TIMER_STATS=y CONFIG_RCU_TORTURE_TEST=m CONFIG_RCU_CPU_STALL_TIMEOUT=60 CONFIG_LATENCYTOP=y +CONFIG_SCHED_TRACER=y +CONFIG_FTRACE_SYSCALLS=y +CONFIG_STACK_TRACER=y CONFIG_BLK_DEV_IO_TRACE=y -# CONFIG_KPROBE_EVENT is not set +CONFIG_UPROBE_EVENT=y CONFIG_LKDTM=m CONFIG_PERCPU_TEST=m CONFIG_ATOMIC64_SELFTEST=y @@ -618,12 +612,6 @@ CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=m CONFIG_X509_CERTIFICATE_PARSER=m CONFIG_CRC7=m CONFIG_CRC8=m -CONFIG_XZ_DEC_X86=y -CONFIG_XZ_DEC_POWERPC=y -CONFIG_XZ_DEC_IA64=y -CONFIG_XZ_DEC_ARM=y -CONFIG_XZ_DEC_ARMTHUMB=y -CONFIG_XZ_DEC_SPARC=y CONFIG_CORDIC=m CONFIG_CMM=m CONFIG_APPLDATA_BASE=y diff --git a/arch/s390/configs/zfcpdump_defconfig b/arch/s390/configs/zfcpdump_defconfig index e376789..9d63051 100644 --- a/arch/s390/configs/zfcpdump_defconfig +++ b/arch/s390/configs/zfcpdump_defconfig @@ -22,8 +22,8 @@ CONFIG_HZ_100=y CONFIG_CRASH_DUMP=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set # CONFIG_SECCOMP is not set -# CONFIG_IUCV is not set CONFIG_NET=y +# CONFIG_IUCV is not set CONFIG_ATM=y CONFIG_ATM_LANE=y CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" @@ -36,9 +36,9 @@ CONFIG_ENCLOSURE_SERVICES=y CONFIG_SCSI=y CONFIG_BLK_DEV_SD=y CONFIG_SCSI_ENCLOSURE=y -CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_LOGGING=y +CONFIG_SCSI_FC_ATTRS=y CONFIG_SCSI_SRP_ATTRS=y CONFIG_ZFCP=y # CONFIG_INPUT_MOUSEDEV_PSAUX is not set @@ -75,12 +75,6 @@ CONFIG_DEBUG_KERNEL=y CONFIG_RCU_CPU_STALL_TIMEOUT=60 # CONFIG_FTRACE is not set # CONFIG_STRICT_DEVMEM is not set -CONFIG_XZ_DEC_X86=y -CONFIG_XZ_DEC_POWERPC=y -CONFIG_XZ_DEC_IA64=y -CONFIG_XZ_DEC_ARM=y -CONFIG_XZ_DEC_ARMTHUMB=y -CONFIG_XZ_DEC_SPARC=y # CONFIG_PFAULT is not set # CONFIG_S390_HYPFS_FS is not set # CONFIG_VIRTUALIZATION is not set diff --git a/arch/s390/defconfig b/arch/s390/defconfig index fab35a8..785c5f2 100644 --- a/arch/s390/defconfig +++ b/arch/s390/defconfig @@ -92,10 +92,10 @@ CONFIG_CHR_DEV_ST=y CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=y -CONFIG_SCSI_MULTI_LUN=y CONFIG_SCSI_CONSTANTS=y CONFIG_SCSI_LOGGING=y CONFIG_SCSI_SCAN_ASYNC=y +CONFIG_SCSI_FC_ATTRS=y CONFIG_ZFCP=y CONFIG_SCSI_VIRTIO=y CONFIG_NETDEVICES=y @@ -164,14 +164,13 @@ CONFIG_CRYPTO_CMAC=m CONFIG_CRYPTO_XCBC=m CONFIG_CRYPTO_VMAC=m CONFIG_CRYPTO_CRC32=m -CONFIG_CRYPTO_CRCT10DIF=m CONFIG_CRYPTO_MD4=m CONFIG_CRYPTO_MICHAEL_MIC=m CONFIG_CRYPTO_RMD128=m CONFIG_CRYPTO_RMD160=m CONFIG_CRYPTO_RMD256=m CONFIG_CRYPTO_RMD320=m -CONFIG_CRYPTO_SHA256=m +CONFIG_CRYPTO_SHA256=y CONFIG_CRYPTO_SHA512=m CONFIG_CRYPTO_TGR192=m CONFIG_CRYPTO_WP512=m diff --git a/arch/s390/kernel/ftrace.c b/arch/s390/kernel/ftrace.c index 51d14fe5..ca1cabb 100644 --- a/arch/s390/kernel/ftrace.c +++ b/arch/s390/kernel/ftrace.c @@ -121,6 +121,8 @@ unsigned long __kprobes prepare_ftrace_return(unsigned long parent, { struct ftrace_graph_ent trace; + if (unlikely(ftrace_graph_is_dead())) + goto out; if (unlikely(atomic_read(¤t->tracing_graph_pause))) goto out; ip = (ip & PSW_ADDR_INSN) - MCOUNT_INSN_SIZE; diff --git a/arch/s390/kernel/vdso32/clock_gettime.S b/arch/s390/kernel/vdso32/clock_gettime.S index 48c2206..5eec9af 100644 --- a/arch/s390/kernel/vdso32/clock_gettime.S +++ b/arch/s390/kernel/vdso32/clock_gettime.S @@ -19,6 +19,7 @@ .type __kernel_clock_gettime,@function __kernel_clock_gettime: .cfi_startproc + ahi %r15,-16 basr %r5,0 0: al %r5,21f-0b(%r5) /* get &_vdso_data */ chi %r2,__CLOCK_REALTIME_COARSE @@ -34,8 +35,8 @@ __kernel_clock_gettime: 1: l %r4,__VDSO_UPD_COUNT+4(%r5) /* load update counter */ tml %r4,0x0001 /* pending update ? loop */ jnz 1b - stcke 24(%r15) /* Store TOD clock */ - lm %r0,%r1,25(%r15) + stcke 0(%r15) /* Store TOD clock */ + lm %r0,%r1,1(%r15) s %r0,__VDSO_XTIME_STAMP(%r5) /* TOD - cycle_last */ sl %r1,__VDSO_XTIME_STAMP+4(%r5) brc 3,2f @@ -70,6 +71,7 @@ __kernel_clock_gettime: 8: st %r2,0(%r3) /* store tp->tv_sec */ st %r1,4(%r3) /* store tp->tv_nsec */ lhi %r2,0 + ahi %r15,16 br %r14 /* CLOCK_MONOTONIC_COARSE */ @@ -96,8 +98,8 @@ __kernel_clock_gettime: 11: l %r4,__VDSO_UPD_COUNT+4(%r5) /* load update counter */ tml %r4,0x0001 /* pending update ? loop */ jnz 11b - stcke 24(%r15) /* Store TOD clock */ - lm %r0,%r1,25(%r15) + stcke 0(%r15) /* Store TOD clock */ + lm %r0,%r1,1(%r15) s %r0,__VDSO_XTIME_STAMP(%r5) /* TOD - cycle_last */ sl %r1,__VDSO_XTIME_STAMP+4(%r5) brc 3,12f @@ -132,11 +134,13 @@ __kernel_clock_gettime: 17: st %r2,0(%r3) /* store tp->tv_sec */ st %r1,4(%r3) /* store tp->tv_nsec */ lhi %r2,0 + ahi %r15,16 br %r14 /* Fallback to system call */ 19: lhi %r1,__NR_clock_gettime svc 0 + ahi %r15,16 br %r14 20: .long 1000000000 diff --git a/arch/s390/kernel/vdso32/gettimeofday.S b/arch/s390/kernel/vdso32/gettimeofday.S index 60def5f..719de61 100644 --- a/arch/s390/kernel/vdso32/gettimeofday.S +++ b/arch/s390/kernel/vdso32/gettimeofday.S @@ -19,6 +19,7 @@ .type __kernel_gettimeofday,@function __kernel_gettimeofday: .cfi_startproc + ahi %r15,-16 basr %r5,0 0: al %r5,13f-0b(%r5) /* get &_vdso_data */ 1: ltr %r3,%r3 /* check if tz is NULL */ @@ -29,30 +30,30 @@ __kernel_gettimeofday: l %r4,__VDSO_UPD_COUNT+4(%r5) /* load update counter */ tml %r4,0x0001 /* pending update ? loop */ jnz 1b - stcke 24(%r15) /* Store TOD clock */ - lm %r0,%r1,25(%r15) + stcke 0(%r15) /* Store TOD clock */ + lm %r0,%r1,1(%r15) s %r0,__VDSO_XTIME_STAMP(%r5) /* TOD - cycle_last */ sl %r1,__VDSO_XTIME_STAMP+4(%r5) brc 3,3f ahi %r0,-1 3: ms %r0,__VDSO_TK_MULT(%r5) /* * tk->mult */ - st %r0,24(%r15) + st %r0,0(%r15) l %r0,__VDSO_TK_MULT(%r5) ltr %r1,%r1 mr %r0,%r0 jnm 4f a %r0,__VDSO_TK_MULT(%r5) -4: al %r0,24(%r15) +4: al %r0,0(%r15) al %r0,__VDSO_XTIME_NSEC(%r5) /* + xtime */ al %r1,__VDSO_XTIME_NSEC+4(%r5) brc 12,5f ahi %r0,1 -5: mvc 24(4,%r15),__VDSO_XTIME_SEC+4(%r5) +5: mvc 0(4,%r15),__VDSO_XTIME_SEC+4(%r5) cl %r4,__VDSO_UPD_COUNT+4(%r5) /* check update counter */ jne 1b l %r4,__VDSO_TK_SHIFT(%r5) /* Timekeeper shift */ srdl %r0,0(%r4) /* >> tk->shift */ - l %r4,24(%r15) /* get tv_sec from stack */ + l %r4,0(%r15) /* get tv_sec from stack */ basr %r5,0 6: ltr %r0,%r0 jnz 7f @@ -71,6 +72,7 @@ __kernel_gettimeofday: 9: srl %r0,6 st %r0,4(%r2) /* store tv->tv_usec */ 10: slr %r2,%r2 + ahi %r15,16 br %r14 11: .long 1000000000 12: .long 274877907 diff --git a/arch/s390/kernel/vdso64/clock_gettime.S b/arch/s390/kernel/vdso64/clock_gettime.S index 9d9761f..7699e73 100644 --- a/arch/s390/kernel/vdso64/clock_gettime.S +++ b/arch/s390/kernel/vdso64/clock_gettime.S @@ -19,6 +19,7 @@ .type __kernel_clock_gettime,@function __kernel_clock_gettime: .cfi_startproc + aghi %r15,-16 larl %r5,_vdso_data cghi %r2,__CLOCK_REALTIME_COARSE je 4f @@ -37,10 +38,10 @@ __kernel_clock_gettime: 0: lg %r4,__VDSO_UPD_COUNT(%r5) /* load update counter */ tmll %r4,0x0001 /* pending update ? loop */ jnz 0b - stcke 48(%r15) /* Store TOD clock */ + stcke 0(%r15) /* Store TOD clock */ lgf %r2,__VDSO_TK_SHIFT(%r5) /* Timekeeper shift */ lg %r0,__VDSO_WTOM_SEC(%r5) - lg %r1,49(%r15) + lg %r1,1(%r15) sg %r1,__VDSO_XTIME_STAMP(%r5) /* TOD - cycle_last */ msgf %r1,__VDSO_TK_MULT(%r5) /* * tk->mult */ alg %r1,__VDSO_WTOM_NSEC(%r5) @@ -56,6 +57,7 @@ __kernel_clock_gettime: 2: stg %r0,0(%r3) /* store tp->tv_sec */ stg %r1,8(%r3) /* store tp->tv_nsec */ lghi %r2,0 + aghi %r15,16 br %r14 /* CLOCK_MONOTONIC_COARSE */ @@ -82,9 +84,9 @@ __kernel_clock_gettime: 5: lg %r4,__VDSO_UPD_COUNT(%r5) /* load update counter */ tmll %r4,0x0001 /* pending update ? loop */ jnz 5b - stcke 48(%r15) /* Store TOD clock */ + stcke 0(%r15) /* Store TOD clock */ lgf %r2,__VDSO_TK_SHIFT(%r5) /* Timekeeper shift */ - lg %r1,49(%r15) + lg %r1,1(%r15) sg %r1,__VDSO_XTIME_STAMP(%r5) /* TOD - cycle_last */ msgf %r1,__VDSO_TK_MULT(%r5) /* * tk->mult */ alg %r1,__VDSO_XTIME_NSEC(%r5) /* + tk->xtime_nsec */ @@ -101,6 +103,7 @@ __kernel_clock_gettime: 7: stg %r0,0(%r3) /* store tp->tv_sec */ stg %r1,8(%r3) /* store tp->tv_nsec */ lghi %r2,0 + aghi %r15,16 br %r14 /* CLOCK_THREAD_CPUTIME_ID for this thread */ @@ -134,11 +137,13 @@ __kernel_clock_gettime: slgr %r4,%r0 /* r4 = tv_nsec */ stg %r4,8(%r3) lghi %r2,0 + aghi %r15,16 br %r14 /* Fallback to system call */ 12: lghi %r1,__NR_clock_gettime svc 0 + aghi %r15,16 br %r14 13: .quad 1000000000 diff --git a/arch/s390/kernel/vdso64/gettimeofday.S b/arch/s390/kernel/vdso64/gettimeofday.S index 7a34499..6ce4670 100644 --- a/arch/s390/kernel/vdso64/gettimeofday.S +++ b/arch/s390/kernel/vdso64/gettimeofday.S @@ -19,6 +19,7 @@ .type __kernel_gettimeofday,@function __kernel_gettimeofday: .cfi_startproc + aghi %r15,-16 larl %r5,_vdso_data 0: ltgr %r3,%r3 /* check if tz is NULL */ je 1f @@ -28,8 +29,8 @@ __kernel_gettimeofday: lg %r4,__VDSO_UPD_COUNT(%r5) /* load update counter */ tmll %r4,0x0001 /* pending update ? loop */ jnz 0b - stcke 48(%r15) /* Store TOD clock */ - lg %r1,49(%r15) + stcke 0(%r15) /* Store TOD clock */ + lg %r1,1(%r15) sg %r1,__VDSO_XTIME_STAMP(%r5) /* TOD - cycle_last */ msgf %r1,__VDSO_TK_MULT(%r5) /* * tk->mult */ alg %r1,__VDSO_XTIME_NSEC(%r5) /* + tk->xtime_nsec */ @@ -50,6 +51,7 @@ __kernel_gettimeofday: srlg %r0,%r0,6 stg %r0,8(%r2) /* store tv->tv_usec */ 4: lghi %r2,0 + aghi %r15,16 br %r14 5: .quad 1000000000 .long 274877907 diff --git a/arch/s390/kernel/vtime.c b/arch/s390/kernel/vtime.c index 416f2a3..7f0089d 100644 --- a/arch/s390/kernel/vtime.c +++ b/arch/s390/kernel/vtime.c @@ -66,7 +66,11 @@ static int do_account_vtime(struct task_struct *tsk, int hardirq_offset) clock = S390_lowcore.last_update_clock; asm volatile( " stpt %0\n" /* Store current cpu timer value */ +#ifdef CONFIG_HAVE_MARCH_Z9_109_FEATURES + " stckf %1" /* Store current tod clock value */ +#else " stck %1" /* Store current tod clock value */ +#endif : "=m" (S390_lowcore.last_update_timer), "=m" (S390_lowcore.last_update_clock)); S390_lowcore.system_timer += timer - S390_lowcore.last_update_timer; diff --git a/drivers/base/Kconfig b/drivers/base/Kconfig index 61a33f4..df04227 100644 --- a/drivers/base/Kconfig +++ b/drivers/base/Kconfig @@ -171,20 +171,23 @@ config WANT_DEV_COREDUMP Drivers should "select" this option if they desire to use the device coredump mechanism. -config DISABLE_DEV_COREDUMP - bool "Disable device coredump" if EXPERT +config ALLOW_DEV_COREDUMP + bool "Allow device coredump" if EXPERT + default y help - Disable the device coredump mechanism despite drivers wanting to - use it; this allows for more sensitive systems or systems that - don't want to ever access the information to not have the code, - nor keep any data. + This option controls if the device coredump mechanism is available or + not; if disabled, the mechanism will be omitted even if drivers that + can use it are enabled. + Say 'N' for more sensitive systems or systems that don't want + to ever access the information to not have the code, nor keep any + data. - If unsure, say N. + If unsure, say Y. config DEV_COREDUMP bool default y if WANT_DEV_COREDUMP - depends on !DISABLE_DEV_COREDUMP + depends on ALLOW_DEV_COREDUMP config DEBUG_DRIVER bool "Driver Core verbose debug messages" diff --git a/drivers/base/core.c b/drivers/base/core.c index 14d1629..842d047 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -724,12 +724,12 @@ class_dir_create_and_add(struct class *class, struct kobject *parent_kobj) return &dir->kobj; } +static DEFINE_MUTEX(gdp_mutex); static struct kobject *get_device_parent(struct device *dev, struct device *parent) { if (dev->class) { - static DEFINE_MUTEX(gdp_mutex); struct kobject *kobj = NULL; struct kobject *parent_kobj; struct kobject *k; @@ -793,7 +793,9 @@ static void cleanup_glue_dir(struct device *dev, struct kobject *glue_dir) glue_dir->kset != &dev->class->p->glue_dirs) return; + mutex_lock(&gdp_mutex); kobject_put(glue_dir); + mutex_unlock(&gdp_mutex); } static void cleanup_device_parent(struct device *dev) diff --git a/drivers/block/rbd.c b/drivers/block/rbd.c index 0a54c58..27b71a0 100644 --- a/drivers/block/rbd.c +++ b/drivers/block/rbd.c @@ -342,7 +342,6 @@ struct rbd_device { struct list_head rq_queue; /* incoming rq queue */ spinlock_t lock; /* queue, flags, open_count */ - struct workqueue_struct *rq_wq; struct work_struct rq_work; struct rbd_image_header header; @@ -402,6 +401,8 @@ static struct kmem_cache *rbd_segment_name_cache; static int rbd_major; static DEFINE_IDA(rbd_dev_id_ida); +static struct workqueue_struct *rbd_wq; + /* * Default to false for now, as single-major requires >= 0.75 version of * userspace rbd utility. @@ -3452,7 +3453,7 @@ static void rbd_request_fn(struct request_queue *q) } if (queued) - queue_work(rbd_dev->rq_wq, &rbd_dev->rq_work); + queue_work(rbd_wq, &rbd_dev->rq_work); } /* @@ -3532,7 +3533,7 @@ static int rbd_obj_read_sync(struct rbd_device *rbd_dev, page_count = (u32) calc_pages_for(offset, length); pages = ceph_alloc_page_vector(page_count, GFP_KERNEL); if (IS_ERR(pages)) - ret = PTR_ERR(pages); + return PTR_ERR(pages); ret = -ENOMEM; obj_request = rbd_obj_request_create(object_name, offset, length, @@ -5242,16 +5243,9 @@ static int rbd_dev_device_setup(struct rbd_device *rbd_dev) set_capacity(rbd_dev->disk, rbd_dev->mapping.size / SECTOR_SIZE); set_disk_ro(rbd_dev->disk, rbd_dev->mapping.read_only); - rbd_dev->rq_wq = alloc_workqueue("%s", WQ_MEM_RECLAIM, 0, - rbd_dev->disk->disk_name); - if (!rbd_dev->rq_wq) { - ret = -ENOMEM; - goto err_out_mapping; - } - ret = rbd_bus_add_dev(rbd_dev); if (ret) - goto err_out_workqueue; + goto err_out_mapping; /* Everything's ready. Announce the disk to the world. */ @@ -5263,9 +5257,6 @@ static int rbd_dev_device_setup(struct rbd_device *rbd_dev) return ret; -err_out_workqueue: - destroy_workqueue(rbd_dev->rq_wq); - rbd_dev->rq_wq = NULL; err_out_mapping: rbd_dev_mapping_clear(rbd_dev); err_out_disk: @@ -5512,7 +5503,6 @@ static void rbd_dev_device_release(struct device *dev) { struct rbd_device *rbd_dev = dev_to_rbd_dev(dev); - destroy_workqueue(rbd_dev->rq_wq); rbd_free_disk(rbd_dev); clear_bit(RBD_DEV_FLAG_EXISTS, &rbd_dev->flags); rbd_dev_mapping_clear(rbd_dev); @@ -5716,11 +5706,21 @@ static int __init rbd_init(void) if (rc) return rc; + /* + * The number of active work items is limited by the number of + * rbd devices, so leave @max_active at default. + */ + rbd_wq = alloc_workqueue(RBD_DRV_NAME, WQ_MEM_RECLAIM, 0); + if (!rbd_wq) { + rc = -ENOMEM; + goto err_out_slab; + } + if (single_major) { rbd_major = register_blkdev(0, RBD_DRV_NAME); if (rbd_major < 0) { rc = rbd_major; - goto err_out_slab; + goto err_out_wq; } } @@ -5738,6 +5738,8 @@ static int __init rbd_init(void) err_out_blkdev: if (single_major) unregister_blkdev(rbd_major, RBD_DRV_NAME); +err_out_wq: + destroy_workqueue(rbd_wq); err_out_slab: rbd_slab_exit(); return rc; @@ -5749,6 +5751,7 @@ static void __exit rbd_exit(void) rbd_sysfs_cleanup(); if (single_major) unregister_blkdev(rbd_major, RBD_DRV_NAME); + destroy_workqueue(rbd_wq); rbd_slab_exit(); } diff --git a/drivers/dma/edma.c b/drivers/dma/edma.c index 123f578..4cfaaa5 100644 --- a/drivers/dma/edma.c +++ b/drivers/dma/edma.c @@ -1107,52 +1107,14 @@ bool edma_filter_fn(struct dma_chan *chan, void *param) } EXPORT_SYMBOL(edma_filter_fn); -static struct platform_device *pdev0, *pdev1; - -static const struct platform_device_info edma_dev_info0 = { - .name = "edma-dma-engine", - .id = 0, - .dma_mask = DMA_BIT_MASK(32), -}; - -static const struct platform_device_info edma_dev_info1 = { - .name = "edma-dma-engine", - .id = 1, - .dma_mask = DMA_BIT_MASK(32), -}; - static int edma_init(void) { - int ret = platform_driver_register(&edma_driver); - - if (ret == 0) { - pdev0 = platform_device_register_full(&edma_dev_info0); - if (IS_ERR(pdev0)) { - platform_driver_unregister(&edma_driver); - ret = PTR_ERR(pdev0); - goto out; - } - } - - if (!of_have_populated_dt() && EDMA_CTLRS == 2) { - pdev1 = platform_device_register_full(&edma_dev_info1); - if (IS_ERR(pdev1)) { - platform_driver_unregister(&edma_driver); - platform_device_unregister(pdev0); - ret = PTR_ERR(pdev1); - } - } - -out: - return ret; + return platform_driver_register(&edma_driver); } subsys_initcall(edma_init); static void __exit edma_exit(void) { - platform_device_unregister(pdev0); - if (pdev1) - platform_device_unregister(pdev1); platform_driver_unregister(&edma_driver); } module_exit(edma_exit); diff --git a/drivers/i2c/algos/i2c-algo-bit.c b/drivers/i2c/algos/i2c-algo-bit.c index 65ef966..899bede 100644 --- a/drivers/i2c/algos/i2c-algo-bit.c +++ b/drivers/i2c/algos/i2c-algo-bit.c @@ -12,11 +12,6 @@ but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - MA 02110-1301 USA. * ------------------------------------------------------------------------- */ /* With some changes from Frodo Looijaard <frodol@dds.nl>, Kyösti Mälkki diff --git a/drivers/i2c/algos/i2c-algo-pca.c b/drivers/i2c/algos/i2c-algo-pca.c index 8b10f88..580dbf0 100644 --- a/drivers/i2c/algos/i2c-algo-pca.c +++ b/drivers/i2c/algos/i2c-algo-pca.c @@ -12,11 +12,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301 USA. */ #include <linux/kernel.h> diff --git a/drivers/i2c/algos/i2c-algo-pcf.c b/drivers/i2c/algos/i2c-algo-pcf.c index 3437009..270d84b 100644 --- a/drivers/i2c/algos/i2c-algo-pcf.c +++ b/drivers/i2c/algos/i2c-algo-pcf.c @@ -14,11 +14,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301 USA. - * * With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and * Frodo Looijaard <frodol@dds.nl>, and also from Martin Bailey * <mbailey@littlefeet-inc.com> diff --git a/drivers/i2c/algos/i2c-algo-pcf.h b/drivers/i2c/algos/i2c-algo-pcf.h index 1ec703e..262ee80 100644 --- a/drivers/i2c/algos/i2c-algo-pcf.h +++ b/drivers/i2c/algos/i2c-algo-pcf.h @@ -12,12 +12,7 @@ This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - MA 02110-1301 USA. */ + GNU General Public License for more details. */ /* -------------------------------------------------------------------- */ /* With some changes from Frodo Looijaard <frodol@dds.nl> */ diff --git a/drivers/i2c/busses/i2c-ali1535.c b/drivers/i2c/busses/i2c-ali1535.c index 451e305..4f2d788 100644 --- a/drivers/i2c/busses/i2c-ali1535.c +++ b/drivers/i2c/busses/i2c-ali1535.c @@ -14,10 +14,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ /* diff --git a/drivers/i2c/busses/i2c-ali15x3.c b/drivers/i2c/busses/i2c-ali15x3.c index 2fa21ce..45c5c48 100644 --- a/drivers/i2c/busses/i2c-ali15x3.c +++ b/drivers/i2c/busses/i2c-ali15x3.c @@ -12,10 +12,6 @@ but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ /* diff --git a/drivers/i2c/busses/i2c-amd756-s4882.c b/drivers/i2c/busses/i2c-amd756-s4882.c index 41fc683..65e3240 100644 --- a/drivers/i2c/busses/i2c-amd756-s4882.c +++ b/drivers/i2c/busses/i2c-amd756-s4882.c @@ -12,10 +12,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ /* diff --git a/drivers/i2c/busses/i2c-amd756.c b/drivers/i2c/busses/i2c-amd756.c index a16f728..6c7113d 100644 --- a/drivers/i2c/busses/i2c-amd756.c +++ b/drivers/i2c/busses/i2c-amd756.c @@ -15,10 +15,6 @@ but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ /* diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91.c index 917d545..e05a672 100644 --- a/drivers/i2c/busses/i2c-at91.c +++ b/drivers/i2c/busses/i2c-at91.c @@ -434,7 +434,7 @@ static int at91_do_twi_transfer(struct at91_twi_dev *dev) } } - ret = wait_for_completion_io_timeout(&dev->cmd_complete, + ret = wait_for_completion_timeout(&dev->cmd_complete, dev->adapter.timeout); if (ret == 0) { dev_err(dev->dev, "controller timed out\n"); diff --git a/drivers/i2c/busses/i2c-au1550.c b/drivers/i2c/busses/i2c-au1550.c index 8762458..6f8c075 100644 --- a/drivers/i2c/busses/i2c-au1550.c +++ b/drivers/i2c/busses/i2c-au1550.c @@ -21,10 +21,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ #include <linux/delay.h> diff --git a/drivers/i2c/busses/i2c-cpm.c b/drivers/i2c/busses/i2c-cpm.c index f3b89a4..5bdbc71 100644 --- a/drivers/i2c/busses/i2c-cpm.c +++ b/drivers/i2c/busses/i2c-cpm.c @@ -23,10 +23,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #include <linux/kernel.h> diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c index 4d96147..d15b7c9 100644 --- a/drivers/i2c/busses/i2c-davinci.c +++ b/drivers/i2c/busses/i2c-davinci.c @@ -17,10 +17,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * ---------------------------------------------------------------------------- * */ diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-core.c index 3c20e4b..edca99d 100644 --- a/drivers/i2c/busses/i2c-designware-core.c +++ b/drivers/i2c/busses/i2c-designware-core.c @@ -18,10 +18,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * ---------------------------------------------------------------------------- * */ diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h index d66b6cb..5a410ef 100644 --- a/drivers/i2c/busses/i2c-designware-core.h +++ b/drivers/i2c/busses/i2c-designware-core.h @@ -18,10 +18,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * ---------------------------------------------------------------------------- * */ diff --git a/drivers/i2c/busses/i2c-designware-pcidrv.c b/drivers/i2c/busses/i2c-designware-pcidrv.c index d31d313..acb40f9 100644 --- a/drivers/i2c/busses/i2c-designware-pcidrv.c +++ b/drivers/i2c/busses/i2c-designware-pcidrv.c @@ -19,10 +19,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * ---------------------------------------------------------------------------- * */ diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c index a743115..373dd4d 100644 --- a/drivers/i2c/busses/i2c-designware-platdrv.c +++ b/drivers/i2c/busses/i2c-designware-platdrv.c @@ -18,10 +18,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * ---------------------------------------------------------------------------- * */ diff --git a/drivers/i2c/busses/i2c-eg20t.c b/drivers/i2c/busses/i2c-eg20t.c index a44ea13..76e699f 100644 --- a/drivers/i2c/busses/i2c-eg20t.c +++ b/drivers/i2c/busses/i2c-eg20t.c @@ -9,10 +9,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. */ #include <linux/module.h> diff --git a/drivers/i2c/busses/i2c-elektor.c b/drivers/i2c/busses/i2c-elektor.c index 4854970..92e8c0c 100644 --- a/drivers/i2c/busses/i2c-elektor.c +++ b/drivers/i2c/busses/i2c-elektor.c @@ -12,11 +12,7 @@ This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ + GNU General Public License for more details. */ /* ------------------------------------------------------------------------- */ /* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi> and even diff --git a/drivers/i2c/busses/i2c-hydra.c b/drivers/i2c/busses/i2c-hydra.c index 14d2b76..b7864cf 100644 --- a/drivers/i2c/busses/i2c-hydra.c +++ b/drivers/i2c/busses/i2c-hydra.c @@ -15,10 +15,6 @@ but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #include <linux/kernel.h> diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index 7cfc183..6ab4f1c 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -15,10 +15,6 @@ but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ /* diff --git a/drivers/i2c/busses/i2c-imx.c b/drivers/i2c/busses/i2c-imx.c index c48e46a..e9fb7cf 100644 --- a/drivers/i2c/busses/i2c-imx.c +++ b/drivers/i2c/busses/i2c-imx.c @@ -11,11 +11,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, - * USA. - * * Author: * Darius Augulis, Teltonika Inc. * diff --git a/drivers/i2c/busses/i2c-iop3xx.h b/drivers/i2c/busses/i2c-iop3xx.h index 097e270..2d6929c 100644 --- a/drivers/i2c/busses/i2c-iop3xx.h +++ b/drivers/i2c/busses/i2c-iop3xx.h @@ -11,11 +11,7 @@ This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ + GNU General Public License for more details. */ /* ------------------------------------------------------------------------- */ diff --git a/drivers/i2c/busses/i2c-isch.c b/drivers/i2c/busses/i2c-isch.c index cf99dbf..113293d 100644 --- a/drivers/i2c/busses/i2c-isch.c +++ b/drivers/i2c/busses/i2c-isch.c @@ -14,10 +14,6 @@ but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ /* diff --git a/drivers/i2c/busses/i2c-ismt.c b/drivers/i2c/busses/i2c-ismt.c index 3f6ecbf..f2b0ff0 100644 --- a/drivers/i2c/busses/i2c-ismt.c +++ b/drivers/i2c/busses/i2c-ismt.c @@ -14,10 +14,6 @@ * WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. * The full GNU General Public License is included in this distribution * in the file called LICENSE.GPL. * diff --git a/drivers/i2c/busses/i2c-nforce2-s4985.c b/drivers/i2c/busses/i2c-nforce2-s4985.c index b170bdf..88eda09 100644 --- a/drivers/i2c/busses/i2c-nforce2-s4985.c +++ b/drivers/i2c/busses/i2c-nforce2-s4985.c @@ -12,10 +12,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ /* diff --git a/drivers/i2c/busses/i2c-nforce2.c b/drivers/i2c/busses/i2c-nforce2.c index ee3a76c..70b3c91 100644 --- a/drivers/i2c/busses/i2c-nforce2.c +++ b/drivers/i2c/busses/i2c-nforce2.c @@ -17,10 +17,6 @@ but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ /* diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index 0dffb0e..26942c1 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -22,10 +22,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #include <linux/module.h> diff --git a/drivers/i2c/busses/i2c-parport-light.c b/drivers/i2c/busses/i2c-parport-light.c index 62f55fe..d1f625f 100644 --- a/drivers/i2c/busses/i2c-parport-light.c +++ b/drivers/i2c/busses/i2c-parport-light.c @@ -18,10 +18,6 @@ but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * ------------------------------------------------------------------------ */ #include <linux/kernel.h> diff --git a/drivers/i2c/busses/i2c-parport.c b/drivers/i2c/busses/i2c-parport.c index a27aae2..a1fac5a 100644 --- a/drivers/i2c/busses/i2c-parport.c +++ b/drivers/i2c/busses/i2c-parport.c @@ -18,10 +18,6 @@ but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * ------------------------------------------------------------------------ */ #include <linux/kernel.h> diff --git a/drivers/i2c/busses/i2c-parport.h b/drivers/i2c/busses/i2c-parport.h index e572f3a..4e12945 100644 --- a/drivers/i2c/busses/i2c-parport.h +++ b/drivers/i2c/busses/i2c-parport.h @@ -12,10 +12,6 @@ but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. * ------------------------------------------------------------------------ */ #define PORT_DATA 0 diff --git a/drivers/i2c/busses/i2c-pasemi.c b/drivers/i2c/busses/i2c-pasemi.c index 7a9dce4..df1dbc9 100644 --- a/drivers/i2c/busses/i2c-pasemi.c +++ b/drivers/i2c/busses/i2c-pasemi.c @@ -11,10 +11,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/module.h> diff --git a/drivers/i2c/busses/i2c-pca-isa.c b/drivers/i2c/busses/i2c-pca-isa.c index 323f061..e0eb4ca 100644 --- a/drivers/i2c/busses/i2c-pca-isa.c +++ b/drivers/i2c/busses/i2c-pca-isa.c @@ -12,10 +12,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #include <linux/kernel.h> diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c index a6f54ba..67cbec6 100644 --- a/drivers/i2c/busses/i2c-piix4.c +++ b/drivers/i2c/busses/i2c-piix4.c @@ -11,10 +11,6 @@ but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ /* diff --git a/drivers/i2c/busses/i2c-pmcmsp.c b/drivers/i2c/busses/i2c-pmcmsp.c index 8564768..177834e 100644 --- a/drivers/i2c/busses/i2c-pmcmsp.c +++ b/drivers/i2c/busses/i2c-pmcmsp.c @@ -18,10 +18,6 @@ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. */ #include <linux/kernel.h> diff --git a/drivers/i2c/busses/i2c-powermac.c b/drivers/i2c/busses/i2c-powermac.c index 01e9677..60a53c1 100644 --- a/drivers/i2c/busses/i2c-powermac.c +++ b/drivers/i2c/busses/i2c-powermac.c @@ -14,10 +14,6 @@ MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - */ #include <linux/module.h> diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c index e3b0337..6524477 100644 --- a/drivers/i2c/busses/i2c-s3c2410.c +++ b/drivers/i2c/busses/i2c-s3c2410.c @@ -14,10 +14,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/kernel.h> diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c index 8b5e79c..4855188 100644 --- a/drivers/i2c/busses/i2c-sh_mobile.c +++ b/drivers/i2c/busses/i2c-sh_mobile.c @@ -14,10 +14,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/kernel.h> diff --git a/drivers/i2c/busses/i2c-sibyte.c b/drivers/i2c/busses/i2c-sibyte.c index 0fe505d..2b6219d 100644 --- a/drivers/i2c/busses/i2c-sibyte.c +++ b/drivers/i2c/busses/i2c-sibyte.c @@ -12,10 +12,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. */ #include <linux/kernel.h> diff --git a/drivers/i2c/busses/i2c-simtec.c b/drivers/i2c/busses/i2c-simtec.c index 964e5c6..15ac839 100644 --- a/drivers/i2c/busses/i2c-simtec.c +++ b/drivers/i2c/busses/i2c-simtec.c @@ -12,10 +12,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/kernel.h> diff --git a/drivers/i2c/busses/i2c-sis5595.c b/drivers/i2c/busses/i2c-sis5595.c index ac9bc33..7d58a40 100644 --- a/drivers/i2c/busses/i2c-sis5595.c +++ b/drivers/i2c/busses/i2c-sis5595.c @@ -11,10 +11,6 @@ but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ /* Note: we assume there can only be one SIS5595 with one SMBus interface */ diff --git a/drivers/i2c/busses/i2c-sis630.c b/drivers/i2c/busses/i2c-sis630.c index c636673..1e6805b 100644 --- a/drivers/i2c/busses/i2c-sis630.c +++ b/drivers/i2c/busses/i2c-sis630.c @@ -10,10 +10,6 @@ but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ /* diff --git a/drivers/i2c/busses/i2c-sis96x.c b/drivers/i2c/busses/i2c-sis96x.c index 8dc2fc5..44b9044 100644 --- a/drivers/i2c/busses/i2c-sis96x.c +++ b/drivers/i2c/busses/i2c-sis96x.c @@ -10,10 +10,6 @@ but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ /* diff --git a/drivers/i2c/busses/i2c-taos-evm.c b/drivers/i2c/busses/i2c-taos-evm.c index 10855a0..4c7fc2d 100644 --- a/drivers/i2c/busses/i2c-taos-evm.c +++ b/drivers/i2c/busses/i2c-taos-evm.c @@ -13,10 +13,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA */ #include <linux/delay.h> diff --git a/drivers/i2c/busses/i2c-via.c b/drivers/i2c/busses/i2c-via.c index f4a1ed7..59b1d23 100644 --- a/drivers/i2c/busses/i2c-via.c +++ b/drivers/i2c/busses/i2c-via.c @@ -12,10 +12,6 @@ but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #include <linux/kernel.h> diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c index 6841200..0ee2646 100644 --- a/drivers/i2c/busses/i2c-viapro.c +++ b/drivers/i2c/busses/i2c-viapro.c @@ -13,10 +13,6 @@ but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ /* diff --git a/drivers/i2c/busses/i2c-xiic.c b/drivers/i2c/busses/i2c-xiic.c index ade9223..cc65ea0 100644 --- a/drivers/i2c/busses/i2c-xiic.c +++ b/drivers/i2c/busses/i2c-xiic.c @@ -12,10 +12,6 @@ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * * * This code was implemented by Mocean Laboratories AB when porting linux * to the automotive development board Russellville. The copyright holder diff --git a/drivers/i2c/busses/scx200_acb.c b/drivers/i2c/busses/scx200_acb.c index ff3f574..5153354 100644 --- a/drivers/i2c/busses/scx200_acb.c +++ b/drivers/i2c/busses/scx200_acb.c @@ -17,10 +17,6 @@ but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt diff --git a/drivers/i2c/i2c-boardinfo.c b/drivers/i2c/i2c-boardinfo.c index f24cc64..90e3229 100644 --- a/drivers/i2c/i2c-boardinfo.c +++ b/drivers/i2c/i2c-boardinfo.c @@ -10,11 +10,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301 USA. */ #include <linux/kernel.h> diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core.c index 2f90ac6..f43b4e1 100644 --- a/drivers/i2c/i2c-core.c +++ b/drivers/i2c/i2c-core.c @@ -10,12 +10,7 @@ This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - MA 02110-1301 USA. */ + GNU General Public License for more details. */ /* ------------------------------------------------------------------------- */ /* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi>. @@ -670,6 +665,9 @@ static int i2c_device_remove(struct device *dev) status = driver->remove(client); } + if (dev->of_node) + irq_dispose_mapping(client->irq); + dev_pm_domain_detach(&client->dev, true); return status; } diff --git a/drivers/i2c/i2c-core.h b/drivers/i2c/i2c-core.h index 18a8fd2..17700bf 100644 --- a/drivers/i2c/i2c-core.h +++ b/drivers/i2c/i2c-core.h @@ -10,11 +10,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301 USA. */ #include <linux/rwsem.h> diff --git a/drivers/i2c/i2c-dev.c b/drivers/i2c/i2c-dev.c index 80b47e8..71c7a39 100644 --- a/drivers/i2c/i2c-dev.c +++ b/drivers/i2c/i2c-dev.c @@ -14,11 +14,6 @@ but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - MA 02110-1301 USA. */ /* Note that this is a complete rewrite of Simon Vogl's i2c-dev module. diff --git a/drivers/i2c/i2c-smbus.c b/drivers/i2c/i2c-smbus.c index fc99f0d..9ebf9cb 100644 --- a/drivers/i2c/i2c-smbus.c +++ b/drivers/i2c/i2c-smbus.c @@ -13,11 +13,6 @@ * but WITHOUT ANY WARRANTY; without even the implied warranty of * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, - * MA 02110-1301 USA. */ #include <linux/kernel.h> diff --git a/drivers/i2c/i2c-stub.c b/drivers/i2c/i2c-stub.c index d241aa2..af2a94e 100644 --- a/drivers/i2c/i2c-stub.c +++ b/drivers/i2c/i2c-stub.c @@ -13,10 +13,6 @@ but WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details. - - You should have received a copy of the GNU General Public License - along with this program; if not, write to the Free Software - Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ #define DEBUG 1 diff --git a/drivers/iio/accel/kxcjk-1013.c b/drivers/iio/accel/kxcjk-1013.c index 98909a9..a23e58c 100644 --- a/drivers/iio/accel/kxcjk-1013.c +++ b/drivers/iio/accel/kxcjk-1013.c @@ -894,7 +894,7 @@ static const struct attribute_group kxcjk1013_attrs_group = { static const struct iio_event_spec kxcjk1013_event = { .type = IIO_EV_TYPE_THRESH, - .dir = IIO_EV_DIR_RISING | IIO_EV_DIR_FALLING, + .dir = IIO_EV_DIR_EITHER, .mask_separate = BIT(IIO_EV_INFO_VALUE) | BIT(IIO_EV_INFO_ENABLE) | BIT(IIO_EV_INFO_PERIOD) diff --git a/drivers/iio/light/tsl4531.c b/drivers/iio/light/tsl4531.c index a15006e..0763b86 100644 --- a/drivers/iio/light/tsl4531.c +++ b/drivers/iio/light/tsl4531.c @@ -230,9 +230,12 @@ static int tsl4531_resume(struct device *dev) return i2c_smbus_write_byte_data(to_i2c_client(dev), TSL4531_CONTROL, TSL4531_MODE_NORMAL); } -#endif static SIMPLE_DEV_PM_OPS(tsl4531_pm_ops, tsl4531_suspend, tsl4531_resume); +#define TSL4531_PM_OPS (&tsl4531_pm_ops) +#else +#define TSL4531_PM_OPS NULL +#endif static const struct i2c_device_id tsl4531_id[] = { { "tsl4531", 0 }, @@ -243,7 +246,7 @@ MODULE_DEVICE_TABLE(i2c, tsl4531_id); static struct i2c_driver tsl4531_driver = { .driver = { .name = TSL4531_DRV_NAME, - .pm = &tsl4531_pm_ops, + .pm = TSL4531_PM_OPS, .owner = THIS_MODULE, }, .probe = tsl4531_probe, diff --git a/drivers/iio/proximity/as3935.c b/drivers/iio/proximity/as3935.c index 5e780ef..8349cc0 100644 --- a/drivers/iio/proximity/as3935.c +++ b/drivers/iio/proximity/as3935.c @@ -330,7 +330,7 @@ static int as3935_probe(struct spi_device *spi) return -EINVAL; } - indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(st)); + indio_dev = devm_iio_device_alloc(&spi->dev, sizeof(*st)); if (!indio_dev) return -ENOMEM; diff --git a/drivers/irqchip/irq-armada-370-xp.c b/drivers/irqchip/irq-armada-370-xp.c index 3e238cd..6a2e168 100644 --- a/drivers/irqchip/irq-armada-370-xp.c +++ b/drivers/irqchip/irq-armada-370-xp.c @@ -43,6 +43,7 @@ #define ARMADA_370_XP_INT_CLEAR_ENABLE_OFFS (0x34) #define ARMADA_370_XP_INT_SOURCE_CTL(irq) (0x100 + irq*4) #define ARMADA_370_XP_INT_SOURCE_CPU_MASK 0xF +#define ARMADA_370_XP_INT_IRQ_FIQ_MASK(cpuid) ((BIT(0) | BIT(8)) << cpuid) #define ARMADA_370_XP_CPU_INTACK_OFFS (0x44) #define ARMADA_375_PPI_CAUSE (0x10) @@ -406,19 +407,29 @@ static void armada_370_xp_mpic_handle_cascade_irq(unsigned int irq, struct irq_desc *desc) { struct irq_chip *chip = irq_get_chip(irq); - unsigned long irqmap, irqn; + unsigned long irqmap, irqn, irqsrc, cpuid; unsigned int cascade_irq; chained_irq_enter(chip, desc); irqmap = readl_relaxed(per_cpu_int_base + ARMADA_375_PPI_CAUSE); - - if (irqmap & BIT(0)) { - armada_370_xp_handle_msi_irq(NULL, true); - irqmap &= ~BIT(0); - } + cpuid = cpu_logical_map(smp_processor_id()); for_each_set_bit(irqn, &irqmap, BITS_PER_LONG) { + irqsrc = readl_relaxed(main_int_base + + ARMADA_370_XP_INT_SOURCE_CTL(irqn)); + + /* Check if the interrupt is not masked on current CPU. + * Test IRQ (0-1) and FIQ (8-9) mask bits. + */ + if (!(irqsrc & ARMADA_370_XP_INT_IRQ_FIQ_MASK(cpuid))) + continue; + + if (irqn == 1) { + armada_370_xp_handle_msi_irq(NULL, true); + continue; + } + cascade_irq = irq_find_mapping(armada_370_xp_mpic_domain, irqn); generic_handle_irq(cascade_irq); } diff --git a/drivers/media/dvb-core/dvb_frontend.c b/drivers/media/dvb-core/dvb_frontend.c index b8579ee..2cf3057 100644 --- a/drivers/media/dvb-core/dvb_frontend.c +++ b/drivers/media/dvb-core/dvb_frontend.c @@ -962,6 +962,11 @@ static int dvb_frontend_clear_cache(struct dvb_frontend *fe) case SYS_ATSC: c->modulation = VSB_8; break; + case SYS_ISDBS: + c->symbol_rate = 28860000; + c->rolloff = ROLLOFF_35; + c->bandwidth_hz = c->symbol_rate / 100 * 135; + break; default: c->modulation = QAM_AUTO; break; @@ -2072,6 +2077,7 @@ static int dtv_set_frontend(struct dvb_frontend *fe) break; case SYS_DVBS: case SYS_TURBO: + case SYS_ISDBS: rolloff = 135; break; case SYS_DVBS2: diff --git a/drivers/media/dvb-frontends/ds3000.c b/drivers/media/dvb-frontends/ds3000.c index 335daef..9d0d034 100644 --- a/drivers/media/dvb-frontends/ds3000.c +++ b/drivers/media/dvb-frontends/ds3000.c @@ -864,6 +864,13 @@ struct dvb_frontend *ds3000_attach(const struct ds3000_config *config, memcpy(&state->frontend.ops, &ds3000_ops, sizeof(struct dvb_frontend_ops)); state->frontend.demodulator_priv = state; + + /* + * Some devices like T480 starts with voltage on. Be sure + * to turn voltage off during init, as this can otherwise + * interfere with Unicable SCR systems. + */ + ds3000_set_voltage(&state->frontend, SEC_VOLTAGE_OFF); return &state->frontend; error3: diff --git a/drivers/media/dvb-frontends/sp2.c b/drivers/media/dvb-frontends/sp2.c index 9b684d5..15bf431 100644 --- a/drivers/media/dvb-frontends/sp2.c +++ b/drivers/media/dvb-frontends/sp2.c @@ -266,7 +266,7 @@ int sp2_ci_poll_slot_status(struct dvb_ca_en50221 *en50221, return s->status; } -int sp2_init(struct sp2 *s) +static int sp2_init(struct sp2 *s) { int ret = 0; u8 buf; @@ -348,7 +348,7 @@ err: return ret; } -int sp2_exit(struct i2c_client *client) +static int sp2_exit(struct i2c_client *client) { struct sp2 *s; diff --git a/drivers/media/dvb-frontends/tc90522.c b/drivers/media/dvb-frontends/tc90522.c index d9905fb..b35d65c 100644 --- a/drivers/media/dvb-frontends/tc90522.c +++ b/drivers/media/dvb-frontends/tc90522.c @@ -216,32 +216,30 @@ static int tc90522s_get_frontend(struct dvb_frontend *fe) c->delivery_system = SYS_ISDBS; layers = 0; - ret = reg_read(state, 0xe8, val, 3); + ret = reg_read(state, 0xe6, val, 5); if (ret == 0) { - int slots; u8 v; + c->stream_id = val[0] << 8 | val[1]; + /* high/single layer */ - v = (val[0] & 0x70) >> 4; + v = (val[2] & 0x70) >> 4; c->modulation = (v == 7) ? PSK_8 : QPSK; c->fec_inner = fec_conv_sat[v]; c->layer[0].fec = c->fec_inner; c->layer[0].modulation = c->modulation; - c->layer[0].segment_count = val[1] & 0x3f; /* slots */ + c->layer[0].segment_count = val[3] & 0x3f; /* slots */ /* low layer */ - v = (val[0] & 0x07); + v = (val[2] & 0x07); c->layer[1].fec = fec_conv_sat[v]; if (v == 0) /* no low layer */ c->layer[1].segment_count = 0; else - c->layer[1].segment_count = val[2] & 0x3f; /* slots */ + c->layer[1].segment_count = val[4] & 0x3f; /* slots */ /* actually, BPSK if v==1, but not defined in fe_modulation_t */ c->layer[1].modulation = QPSK; layers = (v > 0) ? 2 : 1; - - slots = c->layer[0].segment_count + c->layer[1].segment_count; - c->symbol_rate = 28860000 * slots / 48; } /* statistics */ @@ -363,7 +361,7 @@ static int tc90522t_get_frontend(struct dvb_frontend *fe) u8 v; c->isdbt_partial_reception = val[0] & 0x01; - c->isdbt_sb_mode = (val[0] & 0xc0) == 0x01; + c->isdbt_sb_mode = (val[0] & 0xc0) == 0x40; /* layer A */ v = (val[2] & 0x78) >> 3; diff --git a/drivers/media/platform/vivid/vivid-core.c b/drivers/media/platform/vivid/vivid-core.c index 2c61a62..686c3c2 100644 --- a/drivers/media/platform/vivid/vivid-core.c +++ b/drivers/media/platform/vivid/vivid-core.c @@ -100,11 +100,9 @@ MODULE_PARM_DESC(ccs_out_mode, " output crop/compose/scale mode:\n" "\t\t bit 0=crop, 1=compose, 2=scale,\n" "\t\t -1=user-controlled (default)"); -static unsigned multiplanar[VIVID_MAX_DEVS]; +static unsigned multiplanar[VIVID_MAX_DEVS] = { [0 ... (VIVID_MAX_DEVS - 1)] = 1 }; module_param_array(multiplanar, uint, NULL, 0444); -MODULE_PARM_DESC(multiplanar, " 0 (default) is alternating single and multiplanar devices,\n" - "\t\t 1 is single planar devices,\n" - "\t\t 2 is multiplanar devices"); +MODULE_PARM_DESC(multiplanar, " 1 (default) creates a single planar device, 2 creates a multiplanar device."); /* Default: video + vbi-cap (raw and sliced) + radio rx + radio tx + sdr + vbi-out + vid-out */ static unsigned node_types[VIVID_MAX_DEVS] = { [0 ... (VIVID_MAX_DEVS - 1)] = 0x1d3d }; @@ -669,10 +667,7 @@ static int __init vivid_create_instance(int inst) /* start detecting feature set */ /* do we use single- or multi-planar? */ - if (multiplanar[inst] == 0) - dev->multiplanar = inst & 1; - else - dev->multiplanar = multiplanar[inst] > 1; + dev->multiplanar = multiplanar[inst] > 1; v4l2_info(&dev->v4l2_dev, "using %splanar format API\n", dev->multiplanar ? "multi" : "single "); diff --git a/drivers/media/rc/imon.c b/drivers/media/rc/imon.c index b8837dd..65f80b8 100644 --- a/drivers/media/rc/imon.c +++ b/drivers/media/rc/imon.c @@ -1678,7 +1678,8 @@ static void imon_incoming_packet(struct imon_context *ictx, if (press_type == 0) rc_keyup(ictx->rdev); else { - if (ictx->rc_type == RC_BIT_RC6_MCE) + if (ictx->rc_type == RC_BIT_RC6_MCE || + ictx->rc_type == RC_BIT_OTHER) rc_keydown(ictx->rdev, ictx->rc_type == RC_BIT_RC6_MCE ? RC_TYPE_RC6_MCE : RC_TYPE_OTHER, ictx->rc_scancode, ictx->rc_toggle); diff --git a/drivers/media/rc/ir-hix5hd2.c b/drivers/media/rc/ir-hix5hd2.c index 08bbd4f..b0df629 100644 --- a/drivers/media/rc/ir-hix5hd2.c +++ b/drivers/media/rc/ir-hix5hd2.c @@ -297,7 +297,7 @@ static int hix5hd2_ir_remove(struct platform_device *pdev) return 0; } -#ifdef CONFIG_PM +#ifdef CONFIG_PM_SLEEP static int hix5hd2_ir_suspend(struct device *dev) { struct hix5hd2_ir_priv *priv = dev_get_drvdata(dev); diff --git a/drivers/media/rc/ir-rc5-decoder.c b/drivers/media/rc/ir-rc5-decoder.c index 2ef7639..84fa6e9 100644 --- a/drivers/media/rc/ir-rc5-decoder.c +++ b/drivers/media/rc/ir-rc5-decoder.c @@ -53,7 +53,7 @@ static int ir_rc5_decode(struct rc_dev *dev, struct ir_raw_event ev) u32 scancode; enum rc_type protocol; - if (!(dev->enabled_protocols & (RC_BIT_RC5 | RC_BIT_RC5X))) + if (!(dev->enabled_protocols & (RC_BIT_RC5 | RC_BIT_RC5X | RC_BIT_RC5_SZ))) return 0; if (!is_timing_event(ev)) { diff --git a/drivers/media/rc/rc-ir-raw.c b/drivers/media/rc/rc-ir-raw.c index e8fff2a..b732ac6 100644 --- a/drivers/media/rc/rc-ir-raw.c +++ b/drivers/media/rc/rc-ir-raw.c @@ -262,7 +262,6 @@ int ir_raw_event_register(struct rc_dev *dev) return -ENOMEM; dev->raw->dev = dev; - dev->enabled_protocols = ~0; dev->change_protocol = change_protocol; rc = kfifo_alloc(&dev->raw->kfifo, sizeof(struct ir_raw_event) * MAX_IR_EVENT_SIZE, diff --git a/drivers/media/rc/rc-main.c b/drivers/media/rc/rc-main.c index a7991c7..8d3b74c 100644 --- a/drivers/media/rc/rc-main.c +++ b/drivers/media/rc/rc-main.c @@ -1421,6 +1421,8 @@ int rc_register_device(struct rc_dev *dev) if (dev->change_protocol) { u64 rc_type = (1 << rc_map->rc_type); + if (dev->driver_type == RC_DRIVER_IR_RAW) + rc_type |= RC_BIT_LIRC; rc = dev->change_protocol(dev, &rc_type); if (rc < 0) goto out_raw; diff --git a/drivers/mmc/core/host.c b/drivers/mmc/core/host.c index 03c53b7..270d58a 100644 --- a/drivers/mmc/core/host.c +++ b/drivers/mmc/core/host.c @@ -311,7 +311,8 @@ int mmc_of_parse(struct mmc_host *host) struct device_node *np; u32 bus_width; int len, ret; - bool cap_invert, gpio_invert; + bool cd_cap_invert, cd_gpio_invert = false; + bool ro_cap_invert, ro_gpio_invert = false; if (!host->parent || !host->parent->of_node) return 0; @@ -359,16 +360,13 @@ int mmc_of_parse(struct mmc_host *host) if (of_find_property(np, "non-removable", &len)) { host->caps |= MMC_CAP_NONREMOVABLE; } else { - if (of_property_read_bool(np, "cd-inverted")) - cap_invert = true; - else - cap_invert = false; + cd_cap_invert = of_property_read_bool(np, "cd-inverted"); if (of_find_property(np, "broken-cd", &len)) host->caps |= MMC_CAP_NEEDS_POLL; ret = mmc_gpiod_request_cd(host, "cd", 0, true, - 0, &gpio_invert); + 0, &cd_gpio_invert); if (ret) { if (ret == -EPROBE_DEFER) return ret; @@ -391,17 +389,14 @@ int mmc_of_parse(struct mmc_host *host) * both inverted, the end result is that the CD line is * not inverted. */ - if (cap_invert ^ gpio_invert) + if (cd_cap_invert ^ cd_gpio_invert) host->caps2 |= MMC_CAP2_CD_ACTIVE_HIGH; } /* Parse Write Protection */ - if (of_property_read_bool(np, "wp-inverted")) - cap_invert = true; - else - cap_invert = false; + ro_cap_invert = of_property_read_bool(np, "wp-inverted"); - ret = mmc_gpiod_request_ro(host, "wp", 0, false, 0, &gpio_invert); + ret = mmc_gpiod_request_ro(host, "wp", 0, false, 0, &ro_gpio_invert); if (ret) { if (ret == -EPROBE_DEFER) goto out; @@ -414,7 +409,7 @@ int mmc_of_parse(struct mmc_host *host) dev_info(host->parent, "Got WP GPIO\n"); /* See the comment on CD inversion above */ - if (cap_invert ^ gpio_invert) + if (ro_cap_invert ^ ro_gpio_invert) host->caps2 |= MMC_CAP2_RO_ACTIVE_HIGH; if (of_find_property(np, "cap-sd-highspeed", &len)) diff --git a/drivers/of/base.c b/drivers/of/base.c index 2305dc0..3823edf 100644 --- a/drivers/of/base.c +++ b/drivers/of/base.c @@ -1280,52 +1280,6 @@ int of_property_read_string(struct device_node *np, const char *propname, EXPORT_SYMBOL_GPL(of_property_read_string); /** - * of_property_read_string_index - Find and read a string from a multiple - * strings property. - * @np: device node from which the property value is to be read. - * @propname: name of the property to be searched. - * @index: index of the string in the list of strings - * @out_string: pointer to null terminated return string, modified only if - * return value is 0. - * - * Search for a property in a device tree node and retrieve a null - * terminated string value (pointer to data, not a copy) in the list of strings - * contained in that property. - * Returns 0 on success, -EINVAL if the property does not exist, -ENODATA if - * property does not have a value, and -EILSEQ if the string is not - * null-terminated within the length of the property data. - * - * The out_string pointer is modified only if a valid string can be decoded. - */ -int of_property_read_string_index(struct device_node *np, const char *propname, - int index, const char **output) -{ - struct property *prop = of_find_property(np, propname, NULL); - int i = 0; - size_t l = 0, total = 0; - const char *p; - - if (!prop) - return -EINVAL; - if (!prop->value) - return -ENODATA; - if (strnlen(prop->value, prop->length) >= prop->length) - return -EILSEQ; - - p = prop->value; - - for (i = 0; total < prop->length; total += l, p += l) { - l = strlen(p) + 1; - if (i++ == index) { - *output = p; - return 0; - } - } - return -ENODATA; -} -EXPORT_SYMBOL_GPL(of_property_read_string_index); - -/** * of_property_match_string() - Find string in a list and return index * @np: pointer to node containing string list property * @propname: string list property name @@ -1351,7 +1305,7 @@ int of_property_match_string(struct device_node *np, const char *propname, end = p + prop->length; for (i = 0; p < end; i++, p += l) { - l = strlen(p) + 1; + l = strnlen(p, end - p) + 1; if (p + l > end) return -EILSEQ; pr_debug("comparing %s with %s\n", string, p); @@ -1363,39 +1317,41 @@ int of_property_match_string(struct device_node *np, const char *propname, EXPORT_SYMBOL_GPL(of_property_match_string); /** - * of_property_count_strings - Find and return the number of strings from a - * multiple strings property. + * of_property_read_string_util() - Utility helper for parsing string properties * @np: device node from which the property value is to be read. * @propname: name of the property to be searched. + * @out_strs: output array of string pointers. + * @sz: number of array elements to read. + * @skip: Number of strings to skip over at beginning of list. * - * Search for a property in a device tree node and retrieve the number of null - * terminated string contain in it. Returns the number of strings on - * success, -EINVAL if the property does not exist, -ENODATA if property - * does not have a value, and -EILSEQ if the string is not null-terminated - * within the length of the property data. + * Don't call this function directly. It is a utility helper for the + * of_property_read_string*() family of functions. */ -int of_property_count_strings(struct device_node *np, const char *propname) +int of_property_read_string_helper(struct device_node *np, const char *propname, + const char **out_strs, size_t sz, int skip) { struct property *prop = of_find_property(np, propname, NULL); - int i = 0; - size_t l = 0, total = 0; - const char *p; + int l = 0, i = 0; + const char *p, *end; if (!prop) return -EINVAL; if (!prop->value) return -ENODATA; - if (strnlen(prop->value, prop->length) >= prop->length) - return -EILSEQ; - p = prop->value; + end = p + prop->length; - for (i = 0; total < prop->length; total += l, p += l, i++) - l = strlen(p) + 1; - - return i; + for (i = 0; p < end && (!out_strs || i < skip + sz); i++, p += l) { + l = strnlen(p, end - p) + 1; + if (p + l > end) + return -EILSEQ; + if (out_strs && i >= skip) + *out_strs++ = p; + } + i -= skip; + return i <= 0 ? -ENODATA : i; } -EXPORT_SYMBOL_GPL(of_property_count_strings); +EXPORT_SYMBOL_GPL(of_property_read_string_helper); void of_print_phandle_args(const char *msg, const struct of_phandle_args *args) { diff --git a/drivers/of/selftest.c b/drivers/of/selftest.c index 7800127..11b873c 100644 --- a/drivers/of/selftest.c +++ b/drivers/of/selftest.c @@ -339,8 +339,9 @@ static void __init of_selftest_parse_phandle_with_args(void) selftest(rc == -EINVAL, "expected:%i got:%i\n", -EINVAL, rc); } -static void __init of_selftest_property_match_string(void) +static void __init of_selftest_property_string(void) { + const char *strings[4]; struct device_node *np; int rc; @@ -357,13 +358,66 @@ static void __init of_selftest_property_match_string(void) rc = of_property_match_string(np, "phandle-list-names", "third"); selftest(rc == 2, "third expected:0 got:%i\n", rc); rc = of_property_match_string(np, "phandle-list-names", "fourth"); - selftest(rc == -ENODATA, "unmatched string; rc=%i", rc); + selftest(rc == -ENODATA, "unmatched string; rc=%i\n", rc); rc = of_property_match_string(np, "missing-property", "blah"); - selftest(rc == -EINVAL, "missing property; rc=%i", rc); + selftest(rc == -EINVAL, "missing property; rc=%i\n", rc); rc = of_property_match_string(np, "empty-property", "blah"); - selftest(rc == -ENODATA, "empty property; rc=%i", rc); + selftest(rc == -ENODATA, "empty property; rc=%i\n", rc); rc = of_property_match_string(np, "unterminated-string", "blah"); - selftest(rc == -EILSEQ, "unterminated string; rc=%i", rc); + selftest(rc == -EILSEQ, "unterminated string; rc=%i\n", rc); + + /* of_property_count_strings() tests */ + rc = of_property_count_strings(np, "string-property"); + selftest(rc == 1, "Incorrect string count; rc=%i\n", rc); + rc = of_property_count_strings(np, "phandle-list-names"); + selftest(rc == 3, "Incorrect string count; rc=%i\n", rc); + rc = of_property_count_strings(np, "unterminated-string"); + selftest(rc == -EILSEQ, "unterminated string; rc=%i\n", rc); + rc = of_property_count_strings(np, "unterminated-string-list"); + selftest(rc == -EILSEQ, "unterminated string array; rc=%i\n", rc); + + /* of_property_read_string_index() tests */ + rc = of_property_read_string_index(np, "string-property", 0, strings); + selftest(rc == 0 && !strcmp(strings[0], "foobar"), "of_property_read_string_index() failure; rc=%i\n", rc); + strings[0] = NULL; + rc = of_property_read_string_index(np, "string-property", 1, strings); + selftest(rc == -ENODATA && strings[0] == NULL, "of_property_read_string_index() failure; rc=%i\n", rc); + rc = of_property_read_string_index(np, "phandle-list-names", 0, strings); + selftest(rc == 0 && !strcmp(strings[0], "first"), "of_property_read_string_index() failure; rc=%i\n", rc); + rc = of_property_read_string_index(np, "phandle-list-names", 1, strings); + selftest(rc == 0 && !strcmp(strings[0], "second"), "of_property_read_string_index() failure; rc=%i\n", rc); + rc = of_property_read_string_index(np, "phandle-list-names", 2, strings); + selftest(rc == 0 && !strcmp(strings[0], "third"), "of_property_read_string_index() failure; rc=%i\n", rc); + strings[0] = NULL; + rc = of_property_read_string_index(np, "phandle-list-names", 3, strings); + selftest(rc == -ENODATA && strings[0] == NULL, "of_property_read_string_index() failure; rc=%i\n", rc); + strings[0] = NULL; + rc = of_property_read_string_index(np, "unterminated-string", 0, strings); + selftest(rc == -EILSEQ && strings[0] == NULL, "of_property_read_string_index() failure; rc=%i\n", rc); + rc = of_property_read_string_index(np, "unterminated-string-list", 0, strings); + selftest(rc == 0 && !strcmp(strings[0], "first"), "of_property_read_string_index() failure; rc=%i\n", rc); + strings[0] = NULL; + rc = of_property_read_string_index(np, "unterminated-string-list", 2, strings); /* should fail */ + selftest(rc == -EILSEQ && strings[0] == NULL, "of_property_read_string_index() failure; rc=%i\n", rc); + strings[1] = NULL; + + /* of_property_read_string_array() tests */ + rc = of_property_read_string_array(np, "string-property", strings, 4); + selftest(rc == 1, "Incorrect string count; rc=%i\n", rc); + rc = of_property_read_string_array(np, "phandle-list-names", strings, 4); + selftest(rc == 3, "Incorrect string count; rc=%i\n", rc); + rc = of_property_read_string_array(np, "unterminated-string", strings, 4); + selftest(rc == -EILSEQ, "unterminated string; rc=%i\n", rc); + /* -- An incorrectly formed string should cause a failure */ + rc = of_property_read_string_array(np, "unterminated-string-list", strings, 4); + selftest(rc == -EILSEQ, "unterminated string array; rc=%i\n", rc); + /* -- parsing the correctly formed strings should still work: */ + strings[2] = NULL; + rc = of_property_read_string_array(np, "unterminated-string-list", strings, 2); + selftest(rc == 2 && strings[2] == NULL, "of_property_read_string_array() failure; rc=%i\n", rc); + strings[1] = NULL; + rc = of_property_read_string_array(np, "phandle-list-names", strings, 1); + selftest(rc == 1 && strings[1] == NULL, "Overwrote end of string array; rc=%i, str='%s'\n", rc, strings[1]); } #define propcmp(p1, p2) (((p1)->length == (p2)->length) && \ @@ -881,7 +935,7 @@ static int __init of_selftest(void) of_selftest_find_node_by_name(); of_selftest_dynamic(); of_selftest_parse_phandle_with_args(); - of_selftest_property_match_string(); + of_selftest_property_string(); of_selftest_property_copy(); of_selftest_changeset(); of_selftest_parse_interrupts(); diff --git a/drivers/of/testcase-data/tests-phandle.dtsi b/drivers/of/testcase-data/tests-phandle.dtsi index ce0fe08..5b1527e 100644 --- a/drivers/of/testcase-data/tests-phandle.dtsi +++ b/drivers/of/testcase-data/tests-phandle.dtsi @@ -39,7 +39,9 @@ phandle-list-bad-args = <&provider2 1 0>, <&provider3 0>; empty-property; + string-property = "foobar"; unterminated-string = [40 41 42 43]; + unterminated-string-list = "first", "second", [40 41 42 43]; }; }; }; diff --git a/drivers/phy/phy-omap-usb2.c b/drivers/phy/phy-omap-usb2.c index 32c3e86..08f2da2 100644 --- a/drivers/phy/phy-omap-usb2.c +++ b/drivers/phy/phy-omap-usb2.c @@ -254,14 +254,16 @@ static int omap_usb2_probe(struct platform_device *pdev) otg->usb_phy = &phy->phy; platform_set_drvdata(pdev, phy); + pm_runtime_enable(phy->dev); generic_phy = devm_phy_create(phy->dev, NULL, &ops, NULL); - if (IS_ERR(generic_phy)) + if (IS_ERR(generic_phy)) { + pm_runtime_disable(phy->dev); return PTR_ERR(generic_phy); + } phy_set_drvdata(generic_phy, phy); - pm_runtime_enable(phy->dev); phy_provider = devm_of_phy_provider_register(phy->dev, of_phy_simple_xlate); if (IS_ERR(phy_provider)) { diff --git a/drivers/pinctrl/pinctrl-baytrail.c b/drivers/pinctrl/pinctrl-baytrail.c index e12e5b0..9dc3814 100644 --- a/drivers/pinctrl/pinctrl-baytrail.c +++ b/drivers/pinctrl/pinctrl-baytrail.c @@ -227,10 +227,14 @@ static int byt_irq_type(struct irq_data *d, unsigned type) spin_lock_irqsave(&vg->lock, flags); value = readl(reg); + WARN(value & BYT_DIRECT_IRQ_EN, + "Bad pad config for io mode, force direct_irq_en bit clearing"); + /* For level trigges the BYT_TRIG_POS and BYT_TRIG_NEG bits * are used to indicate high and low level triggering */ - value &= ~(BYT_TRIG_POS | BYT_TRIG_NEG | BYT_TRIG_LVL); + value &= ~(BYT_DIRECT_IRQ_EN | BYT_TRIG_POS | BYT_TRIG_NEG | + BYT_TRIG_LVL); switch (type) { case IRQ_TYPE_LEVEL_HIGH: @@ -318,7 +322,7 @@ static int byt_gpio_direction_output(struct gpio_chip *chip, "Potential Error: Setting GPIO with direct_irq_en to output"); reg_val = readl(reg) | BYT_DIR_MASK; - reg_val &= ~BYT_OUTPUT_EN; + reg_val &= ~(BYT_OUTPUT_EN | BYT_INPUT_EN); if (value) writel(reg_val | BYT_LEVEL, reg); diff --git a/drivers/platform/x86/acer-wmi.c b/drivers/platform/x86/acer-wmi.c index 96a0b75..26c4fd1 100644 --- a/drivers/platform/x86/acer-wmi.c +++ b/drivers/platform/x86/acer-wmi.c @@ -579,6 +579,17 @@ static const struct dmi_system_id video_vendor_dmi_table[] __initconst = { DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5741"), }, }, + { + /* + * Note no video_set_backlight_video_vendor, we must use the + * acer interface, as there is no native backlight interface. + */ + .ident = "Acer KAV80", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "KAV80"), + }, + }, {} }; diff --git a/drivers/platform/x86/asus-nb-wmi.c b/drivers/platform/x86/asus-nb-wmi.c index 3a4951f..c1a6cd6 100644 --- a/drivers/platform/x86/asus-nb-wmi.c +++ b/drivers/platform/x86/asus-nb-wmi.c @@ -182,6 +182,15 @@ static const struct dmi_system_id asus_quirks[] = { }, { .callback = dmi_matched, + .ident = "ASUSTeK COMPUTER INC. X550VB", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), + DMI_MATCH(DMI_PRODUCT_NAME, "X550VB"), + }, + .driver_data = &quirk_asus_wapf4, + }, + { + .callback = dmi_matched, .ident = "ASUSTeK COMPUTER INC. X55A", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "ASUSTeK COMPUTER INC."), diff --git a/drivers/platform/x86/ideapad-laptop.c b/drivers/platform/x86/ideapad-laptop.c index 02152de..ed494f3 100644 --- a/drivers/platform/x86/ideapad-laptop.c +++ b/drivers/platform/x86/ideapad-laptop.c @@ -837,6 +837,13 @@ static const struct dmi_system_id no_hw_rfkill_list[] = { DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo Yoga 2"), }, }, + { + .ident = "Lenovo Yoga 3 Pro 1370", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "LENOVO"), + DMI_MATCH(DMI_PRODUCT_VERSION, "Lenovo YOGA 3 Pro-1370"), + }, + }, {} }; diff --git a/drivers/platform/x86/samsung-laptop.c b/drivers/platform/x86/samsung-laptop.c index 5a59665..ff765d8 100644 --- a/drivers/platform/x86/samsung-laptop.c +++ b/drivers/platform/x86/samsung-laptop.c @@ -1561,6 +1561,16 @@ static struct dmi_system_id __initdata samsung_dmi_table[] = { }, { .callback = samsung_dmi_matched, + .ident = "NC210", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), + DMI_MATCH(DMI_PRODUCT_NAME, "NC210/NC110"), + DMI_MATCH(DMI_BOARD_NAME, "NC210/NC110"), + }, + .driver_data = &samsung_broken_acpi_video, + }, + { + .callback = samsung_dmi_matched, .ident = "730U3E/740U3E", .matches = { DMI_MATCH(DMI_SYS_VENDOR, "SAMSUNG ELECTRONICS CO., LTD."), diff --git a/drivers/platform/x86/toshiba_acpi.c b/drivers/platform/x86/toshiba_acpi.c index ef3a190..ab6151f 100644 --- a/drivers/platform/x86/toshiba_acpi.c +++ b/drivers/platform/x86/toshiba_acpi.c @@ -240,6 +240,12 @@ static const struct dmi_system_id toshiba_alt_keymap_dmi[] = { DMI_MATCH(DMI_PRODUCT_NAME, "Qosmio X75-A"), }, }, + { + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"), + DMI_MATCH(DMI_PRODUCT_NAME, "TECRA A50-A"), + }, + }, {} }; diff --git a/drivers/regulator/max1586.c b/drivers/regulator/max1586.c index 86db310..d2a8c64c 100644 --- a/drivers/regulator/max1586.c +++ b/drivers/regulator/max1586.c @@ -163,7 +163,7 @@ static int of_get_max1586_platform_data(struct device *dev, struct max1586_platform_data *pdata) { struct max1586_subdev_data *sub; - struct of_regulator_match rmatch[ARRAY_SIZE(max1586_reg)]; + struct of_regulator_match rmatch[ARRAY_SIZE(max1586_reg)] = { }; struct device_node *np = dev->of_node; int i, matched; diff --git a/drivers/regulator/max77686.c b/drivers/regulator/max77686.c index ef1af2d..f69320e 100644 --- a/drivers/regulator/max77686.c +++ b/drivers/regulator/max77686.c @@ -395,7 +395,7 @@ static int max77686_pmic_dt_parse_pdata(struct platform_device *pdev, struct max77686_dev *iodev = dev_get_drvdata(pdev->dev.parent); struct device_node *pmic_np, *regulators_np; struct max77686_regulator_data *rdata; - struct of_regulator_match rmatch; + struct of_regulator_match rmatch = { }; unsigned int i; pmic_np = iodev->dev->of_node; diff --git a/drivers/regulator/max77693.c b/drivers/regulator/max77693.c index c67ff05..d158f71 100644 --- a/drivers/regulator/max77693.c +++ b/drivers/regulator/max77693.c @@ -227,7 +227,7 @@ static int max77693_pmic_probe(struct platform_device *pdev) struct max77693_dev *iodev = dev_get_drvdata(pdev->dev.parent); struct max77693_regulator_data *rdata = NULL; int num_rdata, i; - struct regulator_config config; + struct regulator_config config = { }; num_rdata = max77693_pmic_init_rdata(&pdev->dev, &rdata); if (!rdata || num_rdata <= 0) { diff --git a/drivers/regulator/max77802.c b/drivers/regulator/max77802.c index d89792b..45fa240 100644 --- a/drivers/regulator/max77802.c +++ b/drivers/regulator/max77802.c @@ -454,7 +454,7 @@ static int max77802_pmic_dt_parse_pdata(struct platform_device *pdev, struct max77686_dev *iodev = dev_get_drvdata(pdev->dev.parent); struct device_node *pmic_np, *regulators_np; struct max77686_regulator_data *rdata; - struct of_regulator_match rmatch; + struct of_regulator_match rmatch = { }; unsigned int i; pmic_np = iodev->dev->of_node; diff --git a/drivers/regulator/max8660.c b/drivers/regulator/max8660.c index 2fc4111..7eee2ca 100644 --- a/drivers/regulator/max8660.c +++ b/drivers/regulator/max8660.c @@ -335,7 +335,7 @@ static int max8660_pdata_from_dt(struct device *dev, int matched, i; struct device_node *np; struct max8660_subdev_data *sub; - struct of_regulator_match rmatch[ARRAY_SIZE(max8660_reg)]; + struct of_regulator_match rmatch[ARRAY_SIZE(max8660_reg)] = { }; np = of_get_child_by_name(dev->of_node, "regulators"); if (!np) { diff --git a/drivers/regulator/of_regulator.c b/drivers/regulator/of_regulator.c index 7a51814..5a1d4af 100644 --- a/drivers/regulator/of_regulator.c +++ b/drivers/regulator/of_regulator.c @@ -211,7 +211,8 @@ struct regulator_init_data *regulator_of_get_init_data(struct device *dev, search = dev->of_node; if (!search) { - dev_err(dev, "Failed to find regulator container node\n"); + dev_dbg(dev, "Failed to find regulator container node '%s'\n", + desc->regulators_node); return NULL; } diff --git a/drivers/regulator/s2mpa01.c b/drivers/regulator/s2mpa01.c index 4acefa6..7633b9b 100644 --- a/drivers/regulator/s2mpa01.c +++ b/drivers/regulator/s2mpa01.c @@ -341,7 +341,7 @@ static int s2mpa01_pmic_probe(struct platform_device *pdev) { struct sec_pmic_dev *iodev = dev_get_drvdata(pdev->dev.parent); struct sec_platform_data *pdata = dev_get_platdata(iodev->dev); - struct of_regulator_match rdata[S2MPA01_REGULATOR_MAX]; + struct of_regulator_match rdata[S2MPA01_REGULATOR_MAX] = { }; struct device_node *reg_np = NULL; struct regulator_config config = { }; struct s2mpa01_info *s2mpa01; diff --git a/drivers/soc/versatile/soc-realview.c b/drivers/soc/versatile/soc-realview.c index cea8ea3..1a07bf5 100644 --- a/drivers/soc/versatile/soc-realview.c +++ b/drivers/soc/versatile/soc-realview.c @@ -26,6 +26,7 @@ static const struct of_device_id realview_soc_of_match[] = { { .compatible = "arm,realview-pb11mp-soc", }, { .compatible = "arm,realview-pba8-soc", }, { .compatible = "arm,realview-pbx-soc", }, + { } }; static u32 realview_coreid; diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c index 4482160..831ceb4 100644 --- a/drivers/spi/spi-fsl-dspi.c +++ b/drivers/spi/spi-fsl-dspi.c @@ -46,7 +46,7 @@ #define SPI_TCR 0x08 -#define SPI_CTAR(x) (0x0c + (x * 4)) +#define SPI_CTAR(x) (0x0c + (((x) & 0x3) * 4)) #define SPI_CTAR_FMSZ(x) (((x) & 0x0000000f) << 27) #define SPI_CTAR_CPOL(x) ((x) << 26) #define SPI_CTAR_CPHA(x) ((x) << 25) @@ -70,7 +70,7 @@ #define SPI_PUSHR 0x34 #define SPI_PUSHR_CONT (1 << 31) -#define SPI_PUSHR_CTAS(x) (((x) & 0x00000007) << 28) +#define SPI_PUSHR_CTAS(x) (((x) & 0x00000003) << 28) #define SPI_PUSHR_EOQ (1 << 27) #define SPI_PUSHR_CTCNT (1 << 26) #define SPI_PUSHR_PCS(x) (((1 << x) & 0x0000003f) << 16) diff --git a/drivers/spi/spi-pxa2xx.c b/drivers/spi/spi-pxa2xx.c index d8a105f..9e9e0f9 100644 --- a/drivers/spi/spi-pxa2xx.c +++ b/drivers/spi/spi-pxa2xx.c @@ -1274,7 +1274,9 @@ static int pxa2xx_spi_suspend(struct device *dev) if (status != 0) return status; write_SSCR0(0, drv_data->ioaddr); - clk_disable_unprepare(ssp->clk); + + if (!pm_runtime_suspended(dev)) + clk_disable_unprepare(ssp->clk); return 0; } @@ -1288,7 +1290,8 @@ static int pxa2xx_spi_resume(struct device *dev) pxa2xx_spi_dma_resume(drv_data); /* Enable the SSP clock */ - clk_prepare_enable(ssp->clk); + if (!pm_runtime_suspended(dev)) + clk_prepare_enable(ssp->clk); /* Restore LPSS private register bits */ lpss_ssp_setup(drv_data); diff --git a/drivers/staging/iio/meter/ade7758.h b/drivers/staging/iio/meter/ade7758.h index 0731820..e8c98cf 100644 --- a/drivers/staging/iio/meter/ade7758.h +++ b/drivers/staging/iio/meter/ade7758.h @@ -119,7 +119,6 @@ struct ade7758_state { u8 *tx; u8 *rx; struct mutex buf_lock; - const struct iio_chan_spec *ade7758_ring_channels; struct spi_transfer ring_xfer[4]; struct spi_message ring_msg; /* diff --git a/drivers/staging/iio/meter/ade7758_core.c b/drivers/staging/iio/meter/ade7758_core.c index abc6006..fb373b8 100644 --- a/drivers/staging/iio/meter/ade7758_core.c +++ b/drivers/staging/iio/meter/ade7758_core.c @@ -634,9 +634,6 @@ static const struct iio_chan_spec ade7758_channels[] = { .type = IIO_VOLTAGE, .indexed = 1, .channel = 0, - .extend_name = "raw", - .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), - .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), .address = AD7758_WT(AD7758_PHASE_A, AD7758_VOLTAGE), .scan_index = 0, .scan_type = { @@ -648,9 +645,6 @@ static const struct iio_chan_spec ade7758_channels[] = { .type = IIO_CURRENT, .indexed = 1, .channel = 0, - .extend_name = "raw", - .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), - .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), .address = AD7758_WT(AD7758_PHASE_A, AD7758_CURRENT), .scan_index = 1, .scan_type = { @@ -662,9 +656,7 @@ static const struct iio_chan_spec ade7758_channels[] = { .type = IIO_POWER, .indexed = 1, .channel = 0, - .extend_name = "apparent_raw", - .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), - .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), + .extend_name = "apparent", .address = AD7758_WT(AD7758_PHASE_A, AD7758_APP_PWR), .scan_index = 2, .scan_type = { @@ -676,9 +668,7 @@ static const struct iio_chan_spec ade7758_channels[] = { .type = IIO_POWER, .indexed = 1, .channel = 0, - .extend_name = "active_raw", - .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), - .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), + .extend_name = "active", .address = AD7758_WT(AD7758_PHASE_A, AD7758_ACT_PWR), .scan_index = 3, .scan_type = { @@ -690,9 +680,7 @@ static const struct iio_chan_spec ade7758_channels[] = { .type = IIO_POWER, .indexed = 1, .channel = 0, - .extend_name = "reactive_raw", - .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), - .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), + .extend_name = "reactive", .address = AD7758_WT(AD7758_PHASE_A, AD7758_REACT_PWR), .scan_index = 4, .scan_type = { @@ -704,9 +692,6 @@ static const struct iio_chan_spec ade7758_channels[] = { .type = IIO_VOLTAGE, .indexed = 1, .channel = 1, - .extend_name = "raw", - .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), - .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), .address = AD7758_WT(AD7758_PHASE_B, AD7758_VOLTAGE), .scan_index = 5, .scan_type = { @@ -718,9 +703,6 @@ static const struct iio_chan_spec ade7758_channels[] = { .type = IIO_CURRENT, .indexed = 1, .channel = 1, - .extend_name = "raw", - .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), - .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), .address = AD7758_WT(AD7758_PHASE_B, AD7758_CURRENT), .scan_index = 6, .scan_type = { @@ -732,9 +714,7 @@ static const struct iio_chan_spec ade7758_channels[] = { .type = IIO_POWER, .indexed = 1, .channel = 1, - .extend_name = "apparent_raw", - .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), - .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), + .extend_name = "apparent", .address = AD7758_WT(AD7758_PHASE_B, AD7758_APP_PWR), .scan_index = 7, .scan_type = { @@ -746,9 +726,7 @@ static const struct iio_chan_spec ade7758_channels[] = { .type = IIO_POWER, .indexed = 1, .channel = 1, - .extend_name = "active_raw", - .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), - .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), + .extend_name = "active", .address = AD7758_WT(AD7758_PHASE_B, AD7758_ACT_PWR), .scan_index = 8, .scan_type = { @@ -760,9 +738,7 @@ static const struct iio_chan_spec ade7758_channels[] = { .type = IIO_POWER, .indexed = 1, .channel = 1, - .extend_name = "reactive_raw", - .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), - .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), + .extend_name = "reactive", .address = AD7758_WT(AD7758_PHASE_B, AD7758_REACT_PWR), .scan_index = 9, .scan_type = { @@ -774,9 +750,6 @@ static const struct iio_chan_spec ade7758_channels[] = { .type = IIO_VOLTAGE, .indexed = 1, .channel = 2, - .extend_name = "raw", - .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), - .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), .address = AD7758_WT(AD7758_PHASE_C, AD7758_VOLTAGE), .scan_index = 10, .scan_type = { @@ -788,9 +761,6 @@ static const struct iio_chan_spec ade7758_channels[] = { .type = IIO_CURRENT, .indexed = 1, .channel = 2, - .extend_name = "raw", - .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), - .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), .address = AD7758_WT(AD7758_PHASE_C, AD7758_CURRENT), .scan_index = 11, .scan_type = { @@ -802,9 +772,7 @@ static const struct iio_chan_spec ade7758_channels[] = { .type = IIO_POWER, .indexed = 1, .channel = 2, - .extend_name = "apparent_raw", - .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), - .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), + .extend_name = "apparent", .address = AD7758_WT(AD7758_PHASE_C, AD7758_APP_PWR), .scan_index = 12, .scan_type = { @@ -816,9 +784,7 @@ static const struct iio_chan_spec ade7758_channels[] = { .type = IIO_POWER, .indexed = 1, .channel = 2, - .extend_name = "active_raw", - .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), - .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), + .extend_name = "active", .address = AD7758_WT(AD7758_PHASE_C, AD7758_ACT_PWR), .scan_index = 13, .scan_type = { @@ -830,9 +796,7 @@ static const struct iio_chan_spec ade7758_channels[] = { .type = IIO_POWER, .indexed = 1, .channel = 2, - .extend_name = "reactive_raw", - .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), - .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE), + .extend_name = "reactive", .address = AD7758_WT(AD7758_PHASE_C, AD7758_REACT_PWR), .scan_index = 14, .scan_type = { @@ -873,13 +837,14 @@ static int ade7758_probe(struct spi_device *spi) goto error_free_rx; } st->us = spi; - st->ade7758_ring_channels = &ade7758_channels[0]; mutex_init(&st->buf_lock); indio_dev->name = spi->dev.driver->name; indio_dev->dev.parent = &spi->dev; indio_dev->info = &ade7758_info; indio_dev->modes = INDIO_DIRECT_MODE; + indio_dev->channels = ade7758_channels; + indio_dev->num_channels = ARRAY_SIZE(ade7758_channels); ret = ade7758_configure_ring(indio_dev); if (ret) diff --git a/drivers/staging/iio/meter/ade7758_ring.c b/drivers/staging/iio/meter/ade7758_ring.c index c0accf8..6e90064 100644 --- a/drivers/staging/iio/meter/ade7758_ring.c +++ b/drivers/staging/iio/meter/ade7758_ring.c @@ -85,17 +85,16 @@ static irqreturn_t ade7758_trigger_handler(int irq, void *p) **/ static int ade7758_ring_preenable(struct iio_dev *indio_dev) { - struct ade7758_state *st = iio_priv(indio_dev); unsigned channel; - if (!bitmap_empty(indio_dev->active_scan_mask, indio_dev->masklength)) + if (bitmap_empty(indio_dev->active_scan_mask, indio_dev->masklength)) return -EINVAL; channel = find_first_bit(indio_dev->active_scan_mask, indio_dev->masklength); ade7758_write_waveform_type(&indio_dev->dev, - st->ade7758_ring_channels[channel].address); + indio_dev->channels[channel].address); return 0; } diff --git a/drivers/thermal/of-thermal.c b/drivers/thermal/of-thermal.c index f8eb625..62143ba 100644 --- a/drivers/thermal/of-thermal.c +++ b/drivers/thermal/of-thermal.c @@ -387,15 +387,18 @@ thermal_zone_of_sensor_register(struct device *dev, int sensor_id, int (*get_trend)(void *, long *)) { struct device_node *np, *child, *sensor_np; + struct thermal_zone_device *tzd = ERR_PTR(-ENODEV); np = of_find_node_by_name(NULL, "thermal-zones"); if (!np) return ERR_PTR(-ENODEV); - if (!dev || !dev->of_node) + if (!dev || !dev->of_node) { + of_node_put(np); return ERR_PTR(-EINVAL); + } - sensor_np = dev->of_node; + sensor_np = of_node_get(dev->of_node); for_each_child_of_node(np, child) { struct of_phandle_args sensor_specs; @@ -422,16 +425,21 @@ thermal_zone_of_sensor_register(struct device *dev, int sensor_id, } if (sensor_specs.np == sensor_np && id == sensor_id) { - of_node_put(np); - return thermal_zone_of_add_sensor(child, sensor_np, - data, - get_temp, - get_trend); + tzd = thermal_zone_of_add_sensor(child, sensor_np, + data, + get_temp, + get_trend); + of_node_put(sensor_specs.np); + of_node_put(child); + goto exit; } + of_node_put(sensor_specs.np); } +exit: + of_node_put(sensor_np); of_node_put(np); - return ERR_PTR(-ENODEV); + return tzd; } EXPORT_SYMBOL_GPL(thermal_zone_of_sensor_register); @@ -623,6 +631,7 @@ static int thermal_of_populate_trip(struct device_node *np, /* Required for cooling map matching */ trip->np = np; + of_node_get(np); return 0; } @@ -730,9 +739,14 @@ finish: return tz; free_tbps: + for (i = 0; i < tz->num_tbps; i++) + of_node_put(tz->tbps[i].cooling_device); kfree(tz->tbps); free_trips: + for (i = 0; i < tz->ntrips; i++) + of_node_put(tz->trips[i].np); kfree(tz->trips); + of_node_put(gchild); free_tz: kfree(tz); of_node_put(child); @@ -742,7 +756,13 @@ free_tz: static inline void of_thermal_free_zone(struct __thermal_zone *tz) { + int i; + + for (i = 0; i < tz->num_tbps; i++) + of_node_put(tz->tbps[i].cooling_device); kfree(tz->tbps); + for (i = 0; i < tz->ntrips; i++) + of_node_put(tz->trips[i].np); kfree(tz->trips); kfree(tz); } @@ -814,10 +834,13 @@ int __init of_parse_thermal_zones(void) /* attempting to build remaining zones still */ } } + of_node_put(np); return 0; exit_free: + of_node_put(child); + of_node_put(np); of_thermal_free_zone(tz); /* no memory available, so free what we have built */ @@ -859,4 +882,5 @@ void of_thermal_destroy_zones(void) kfree(zone->ops); of_thermal_free_zone(zone->devdata); } + of_node_put(np); } diff --git a/drivers/thermal/samsung/exynos_thermal_common.h b/drivers/thermal/samsung/exynos_thermal_common.h index 3eb2ed9..158f5aa 100644 --- a/drivers/thermal/samsung/exynos_thermal_common.h +++ b/drivers/thermal/samsung/exynos_thermal_common.h @@ -27,7 +27,7 @@ #define SENSOR_NAME_LEN 16 #define MAX_TRIP_COUNT 8 #define MAX_COOLING_DEVICE 4 -#define MAX_THRESHOLD_LEVS 5 +#define MAX_TRIMINFO_CTRL_REG 2 #define ACTIVE_INTERVAL 500 #define IDLE_INTERVAL 10000 diff --git a/drivers/thermal/samsung/exynos_tmu.c b/drivers/thermal/samsung/exynos_tmu.c index acbff14..49c0924 100644 --- a/drivers/thermal/samsung/exynos_tmu.c +++ b/drivers/thermal/samsung/exynos_tmu.c @@ -77,16 +77,6 @@ static int temp_to_code(struct exynos_tmu_data *data, u8 temp) struct exynos_tmu_platform_data *pdata = data->pdata; int temp_code; - if (pdata->cal_mode == HW_MODE) - return temp; - - if (data->soc == SOC_ARCH_EXYNOS4210) - /* temp should range between 25 and 125 */ - if (temp < 25 || temp > 125) { - temp_code = -EINVAL; - goto out; - } - switch (pdata->cal_type) { case TYPE_TWO_POINT_TRIMMING: temp_code = (temp - pdata->first_point_trim) * @@ -101,7 +91,7 @@ static int temp_to_code(struct exynos_tmu_data *data, u8 temp) temp_code = temp + pdata->default_temp_offset; break; } -out: + return temp_code; } @@ -114,16 +104,6 @@ static int code_to_temp(struct exynos_tmu_data *data, u8 temp_code) struct exynos_tmu_platform_data *pdata = data->pdata; int temp; - if (pdata->cal_mode == HW_MODE) - return temp_code; - - if (data->soc == SOC_ARCH_EXYNOS4210) - /* temp_code should range between 75 and 175 */ - if (temp_code < 75 || temp_code > 175) { - temp = -ENODATA; - goto out; - } - switch (pdata->cal_type) { case TYPE_TWO_POINT_TRIMMING: temp = (temp_code - data->temp_error1) * @@ -138,18 +118,35 @@ static int code_to_temp(struct exynos_tmu_data *data, u8 temp_code) temp = temp_code - pdata->default_temp_offset; break; } -out: + return temp; } +static void exynos_tmu_clear_irqs(struct exynos_tmu_data *data) +{ + const struct exynos_tmu_registers *reg = data->pdata->registers; + unsigned int val_irq; + + val_irq = readl(data->base + reg->tmu_intstat); + /* + * Clear the interrupts. Please note that the documentation for + * Exynos3250, Exynos4412, Exynos5250 and Exynos5260 incorrectly + * states that INTCLEAR register has a different placing of bits + * responsible for FALL IRQs than INTSTAT register. Exynos5420 + * and Exynos5440 documentation is correct (Exynos4210 doesn't + * support FALL IRQs at all). + */ + writel(val_irq, data->base + reg->tmu_intclear); +} + static int exynos_tmu_initialize(struct platform_device *pdev) { struct exynos_tmu_data *data = platform_get_drvdata(pdev); struct exynos_tmu_platform_data *pdata = data->pdata; const struct exynos_tmu_registers *reg = pdata->registers; - unsigned int status, trim_info = 0, con; + unsigned int status, trim_info = 0, con, ctrl; unsigned int rising_threshold = 0, falling_threshold = 0; - int ret = 0, threshold_code, i, trigger_levs = 0; + int ret = 0, threshold_code, i; mutex_lock(&data->lock); clk_enable(data->clk); @@ -164,11 +161,17 @@ static int exynos_tmu_initialize(struct platform_device *pdev) } } - if (TMU_SUPPORTS(pdata, TRIM_RELOAD)) - __raw_writel(1, data->base + reg->triminfo_ctrl); - - if (pdata->cal_mode == HW_MODE) - goto skip_calib_data; + if (TMU_SUPPORTS(pdata, TRIM_RELOAD)) { + for (i = 0; i < reg->triminfo_ctrl_count; i++) { + if (pdata->triminfo_reload[i]) { + ctrl = readl(data->base + + reg->triminfo_ctrl[i]); + ctrl |= pdata->triminfo_reload[i]; + writel(ctrl, data->base + + reg->triminfo_ctrl[i]); + } + } + } /* Save trimming info in order to perform calibration */ if (data->soc == SOC_ARCH_EXYNOS5440) { @@ -197,7 +200,7 @@ static int exynos_tmu_initialize(struct platform_device *pdev) trim_info = readl(data->base + reg->triminfo_data); } data->temp_error1 = trim_info & EXYNOS_TMU_TEMP_MASK; - data->temp_error2 = ((trim_info >> reg->triminfo_85_shift) & + data->temp_error2 = ((trim_info >> EXYNOS_TRIMINFO_85_SHIFT) & EXYNOS_TMU_TEMP_MASK); if (!data->temp_error1 || @@ -207,67 +210,33 @@ static int exynos_tmu_initialize(struct platform_device *pdev) if (!data->temp_error2) data->temp_error2 = - (pdata->efuse_value >> reg->triminfo_85_shift) & + (pdata->efuse_value >> EXYNOS_TRIMINFO_85_SHIFT) & EXYNOS_TMU_TEMP_MASK; -skip_calib_data: - if (pdata->max_trigger_level > MAX_THRESHOLD_LEVS) { - dev_err(&pdev->dev, "Invalid max trigger level\n"); - ret = -EINVAL; - goto out; - } - - for (i = 0; i < pdata->max_trigger_level; i++) { - if (!pdata->trigger_levels[i]) - continue; - - if ((pdata->trigger_type[i] == HW_TRIP) && - (!pdata->trigger_levels[pdata->max_trigger_level - 1])) { - dev_err(&pdev->dev, "Invalid hw trigger level\n"); - ret = -EINVAL; - goto out; - } - - /* Count trigger levels except the HW trip*/ - if (!(pdata->trigger_type[i] == HW_TRIP)) - trigger_levs++; - } - rising_threshold = readl(data->base + reg->threshold_th0); if (data->soc == SOC_ARCH_EXYNOS4210) { /* Write temperature code for threshold */ threshold_code = temp_to_code(data, pdata->threshold); - if (threshold_code < 0) { - ret = threshold_code; - goto out; - } writeb(threshold_code, data->base + reg->threshold_temp); - for (i = 0; i < trigger_levs; i++) + for (i = 0; i < pdata->non_hw_trigger_levels; i++) writeb(pdata->trigger_levels[i], data->base + reg->threshold_th0 + i * sizeof(reg->threshold_th0)); - writel(reg->intclr_rise_mask, data->base + reg->tmu_intclear); + exynos_tmu_clear_irqs(data); } else { /* Write temperature code for rising and falling threshold */ - for (i = 0; - i < trigger_levs && i < EXYNOS_MAX_TRIGGER_PER_REG; i++) { + for (i = 0; i < pdata->non_hw_trigger_levels; i++) { threshold_code = temp_to_code(data, pdata->trigger_levels[i]); - if (threshold_code < 0) { - ret = threshold_code; - goto out; - } rising_threshold &= ~(0xff << 8 * i); rising_threshold |= threshold_code << 8 * i; if (pdata->threshold_falling) { threshold_code = temp_to_code(data, pdata->trigger_levels[i] - pdata->threshold_falling); - if (threshold_code > 0) - falling_threshold |= - threshold_code << 8 * i; + falling_threshold |= threshold_code << 8 * i; } } @@ -276,9 +245,7 @@ skip_calib_data: writel(falling_threshold, data->base + reg->threshold_th1); - writel((reg->intclr_rise_mask << reg->intclr_rise_shift) | - (reg->intclr_fall_mask << reg->intclr_fall_shift), - data->base + reg->tmu_intclear); + exynos_tmu_clear_irqs(data); /* if last threshold limit is also present */ i = pdata->max_trigger_level - 1; @@ -286,10 +253,6 @@ skip_calib_data: (pdata->trigger_type[i] == HW_TRIP)) { threshold_code = temp_to_code(data, pdata->trigger_levels[i]); - if (threshold_code < 0) { - ret = threshold_code; - goto out; - } if (i == EXYNOS_MAX_TRIGGER_PER_REG - 1) { /* 1-4 level to be assigned in th0 reg */ rising_threshold &= ~(0xff << 8 * i); @@ -325,7 +288,7 @@ static void exynos_tmu_control(struct platform_device *pdev, bool on) struct exynos_tmu_data *data = platform_get_drvdata(pdev); struct exynos_tmu_platform_data *pdata = data->pdata; const struct exynos_tmu_registers *reg = pdata->registers; - unsigned int con, interrupt_en, cal_val; + unsigned int con, interrupt_en; mutex_lock(&data->lock); clk_enable(data->clk); @@ -335,15 +298,11 @@ static void exynos_tmu_control(struct platform_device *pdev, bool on) if (pdata->test_mux) con |= (pdata->test_mux << reg->test_mux_addr_shift); - if (pdata->reference_voltage) { - con &= ~(reg->buf_vref_sel_mask << reg->buf_vref_sel_shift); - con |= pdata->reference_voltage << reg->buf_vref_sel_shift; - } + con &= ~(EXYNOS_TMU_REF_VOLTAGE_MASK << EXYNOS_TMU_REF_VOLTAGE_SHIFT); + con |= pdata->reference_voltage << EXYNOS_TMU_REF_VOLTAGE_SHIFT; - if (pdata->gain) { - con &= ~(reg->buf_slope_sel_mask << reg->buf_slope_sel_shift); - con |= (pdata->gain << reg->buf_slope_sel_shift); - } + con &= ~(EXYNOS_TMU_BUF_SLOPE_SEL_MASK << EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT); + con |= (pdata->gain << EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT); if (pdata->noise_cancel_mode) { con &= ~(reg->therm_trip_mode_mask << @@ -351,29 +310,8 @@ static void exynos_tmu_control(struct platform_device *pdev, bool on) con |= (pdata->noise_cancel_mode << reg->therm_trip_mode_shift); } - if (pdata->cal_mode == HW_MODE) { - con &= ~(reg->calib_mode_mask << reg->calib_mode_shift); - cal_val = 0; - switch (pdata->cal_type) { - case TYPE_TWO_POINT_TRIMMING: - cal_val = 3; - break; - case TYPE_ONE_POINT_TRIMMING_85: - cal_val = 2; - break; - case TYPE_ONE_POINT_TRIMMING_25: - cal_val = 1; - break; - case TYPE_NONE: - break; - default: - dev_err(&pdev->dev, "Invalid calibration type, using none\n"); - } - con |= cal_val << reg->calib_mode_shift; - } - if (on) { - con |= (1 << reg->core_en_shift); + con |= (1 << EXYNOS_TMU_CORE_EN_SHIFT); interrupt_en = pdata->trigger_enable[3] << reg->inten_rise3_shift | pdata->trigger_enable[2] << reg->inten_rise2_shift | @@ -383,7 +321,7 @@ static void exynos_tmu_control(struct platform_device *pdev, bool on) interrupt_en |= interrupt_en << reg->inten_fall0_shift; } else { - con &= ~(1 << reg->core_en_shift); + con &= ~(1 << EXYNOS_TMU_CORE_EN_SHIFT); interrupt_en = 0; /* Disable all interrupts */ } writel(interrupt_en, data->base + reg->tmu_inten); @@ -404,8 +342,16 @@ static int exynos_tmu_read(struct exynos_tmu_data *data) clk_enable(data->clk); temp_code = readb(data->base + reg->tmu_cur_temp); - temp = code_to_temp(data, temp_code); + if (data->soc == SOC_ARCH_EXYNOS4210) + /* temp_code should range between 75 and 175 */ + if (temp_code < 75 || temp_code > 175) { + temp = -ENODATA; + goto out; + } + + temp = code_to_temp(data, temp_code); +out: clk_disable(data->clk); mutex_unlock(&data->lock); @@ -465,7 +411,7 @@ static void exynos_tmu_work(struct work_struct *work) struct exynos_tmu_data, irq_work); struct exynos_tmu_platform_data *pdata = data->pdata; const struct exynos_tmu_registers *reg = pdata->registers; - unsigned int val_irq, val_type; + unsigned int val_type; if (!IS_ERR(data->clk_sec)) clk_enable(data->clk_sec); @@ -483,9 +429,7 @@ static void exynos_tmu_work(struct work_struct *work) clk_enable(data->clk); /* TODO: take action based on particular interrupt */ - val_irq = readl(data->base + reg->tmu_intstat); - /* clear the interrupts */ - writel(val_irq, data->base + reg->tmu_intclear); + exynos_tmu_clear_irqs(data); clk_disable(data->clk); mutex_unlock(&data->lock); diff --git a/drivers/thermal/samsung/exynos_tmu.h b/drivers/thermal/samsung/exynos_tmu.h index 1b4a644..c58c766 100644 --- a/drivers/thermal/samsung/exynos_tmu.h +++ b/drivers/thermal/samsung/exynos_tmu.h @@ -34,11 +34,6 @@ enum calibration_type { TYPE_NONE, }; -enum calibration_mode { - SW_MODE, - HW_MODE, -}; - enum soc_type { SOC_ARCH_EXYNOS3250 = 1, SOC_ARCH_EXYNOS4210, @@ -82,46 +77,19 @@ enum soc_type { * bitfields. The register validity, offsets and bitfield values may vary * slightly across different exynos SOC's. * @triminfo_data: register containing 2 pont trimming data - * @triminfo_25_shift: shift bit of the 25 C trim value in triminfo_data reg. - * @triminfo_85_shift: shift bit of the 85 C trim value in triminfo_data reg. * @triminfo_ctrl: trim info controller register. - * @triminfo_reload_shift: shift of triminfo reload enable bit in triminfo_ctrl - reg. + * @triminfo_ctrl_count: the number of trim info controller register. * @tmu_ctrl: TMU main controller register. * @test_mux_addr_shift: shift bits of test mux address. - * @buf_vref_sel_shift: shift bits of reference voltage in tmu_ctrl register. - * @buf_vref_sel_mask: mask bits of reference voltage in tmu_ctrl register. * @therm_trip_mode_shift: shift bits of tripping mode in tmu_ctrl register. * @therm_trip_mode_mask: mask bits of tripping mode in tmu_ctrl register. * @therm_trip_en_shift: shift bits of tripping enable in tmu_ctrl register. - * @buf_slope_sel_shift: shift bits of amplifier gain value in tmu_ctrl - register. - * @buf_slope_sel_mask: mask bits of amplifier gain value in tmu_ctrl register. - * @calib_mode_shift: shift bits of calibration mode value in tmu_ctrl - register. - * @calib_mode_mask: mask bits of calibration mode value in tmu_ctrl - register. - * @therm_trip_tq_en_shift: shift bits of thermal trip enable by TQ pin in - tmu_ctrl register. - * @core_en_shift: shift bits of TMU core enable bit in tmu_ctrl register. * @tmu_status: register drescribing the TMU status. * @tmu_cur_temp: register containing the current temperature of the TMU. - * @tmu_cur_temp_shift: shift bits of current temp value in tmu_cur_temp - register. * @threshold_temp: register containing the base threshold level. * @threshold_th0: Register containing first set of rising levels. - * @threshold_th0_l0_shift: shift bits of level0 threshold temperature. - * @threshold_th0_l1_shift: shift bits of level1 threshold temperature. - * @threshold_th0_l2_shift: shift bits of level2 threshold temperature. - * @threshold_th0_l3_shift: shift bits of level3 threshold temperature. * @threshold_th1: Register containing second set of rising levels. - * @threshold_th1_l0_shift: shift bits of level0 threshold temperature. - * @threshold_th1_l1_shift: shift bits of level1 threshold temperature. - * @threshold_th1_l2_shift: shift bits of level2 threshold temperature. - * @threshold_th1_l3_shift: shift bits of level3 threshold temperature. * @threshold_th2: Register containing third set of rising levels. - * @threshold_th2_l0_shift: shift bits of level0 threshold temperature. - * @threshold_th3: Register containing fourth set of rising levels. * @threshold_th3_l0_shift: shift bits of level0 threshold temperature. * @tmu_inten: register containing the different threshold interrupt enable bits. @@ -130,68 +98,35 @@ enum soc_type { * @inten_rise2_shift: shift bits of rising 2 interrupt bits. * @inten_rise3_shift: shift bits of rising 3 interrupt bits. * @inten_fall0_shift: shift bits of falling 0 interrupt bits. - * @inten_fall1_shift: shift bits of falling 1 interrupt bits. - * @inten_fall2_shift: shift bits of falling 2 interrupt bits. - * @inten_fall3_shift: shift bits of falling 3 interrupt bits. * @tmu_intstat: Register containing the interrupt status values. * @tmu_intclear: Register for clearing the raised interrupt status. - * @intclr_fall_shift: shift bits for interrupt clear fall 0 - * @intclr_rise_shift: shift bits of all rising interrupt bits. - * @intclr_rise_mask: mask bits of all rising interrupt bits. - * @intclr_fall_mask: mask bits of all rising interrupt bits. * @emul_con: TMU emulation controller register. * @emul_temp_shift: shift bits of emulation temperature. * @emul_time_shift: shift bits of emulation time. - * @emul_time_mask: mask bits of emulation time. * @tmu_irqstatus: register to find which TMU generated interrupts. * @tmu_pmin: register to get/set the Pmin value. */ struct exynos_tmu_registers { u32 triminfo_data; - u32 triminfo_25_shift; - u32 triminfo_85_shift; - u32 triminfo_ctrl; - u32 triminfo_ctrl1; - u32 triminfo_reload_shift; + u32 triminfo_ctrl[MAX_TRIMINFO_CTRL_REG]; + u32 triminfo_ctrl_count; u32 tmu_ctrl; u32 test_mux_addr_shift; - u32 buf_vref_sel_shift; - u32 buf_vref_sel_mask; u32 therm_trip_mode_shift; u32 therm_trip_mode_mask; u32 therm_trip_en_shift; - u32 buf_slope_sel_shift; - u32 buf_slope_sel_mask; - u32 calib_mode_shift; - u32 calib_mode_mask; - u32 therm_trip_tq_en_shift; - u32 core_en_shift; u32 tmu_status; u32 tmu_cur_temp; - u32 tmu_cur_temp_shift; u32 threshold_temp; u32 threshold_th0; - u32 threshold_th0_l0_shift; - u32 threshold_th0_l1_shift; - u32 threshold_th0_l2_shift; - u32 threshold_th0_l3_shift; - u32 threshold_th1; - u32 threshold_th1_l0_shift; - u32 threshold_th1_l1_shift; - u32 threshold_th1_l2_shift; - u32 threshold_th1_l3_shift; - u32 threshold_th2; - u32 threshold_th2_l0_shift; - - u32 threshold_th3; u32 threshold_th3_l0_shift; u32 tmu_inten; @@ -200,22 +135,14 @@ struct exynos_tmu_registers { u32 inten_rise2_shift; u32 inten_rise3_shift; u32 inten_fall0_shift; - u32 inten_fall1_shift; - u32 inten_fall2_shift; - u32 inten_fall3_shift; u32 tmu_intstat; u32 tmu_intclear; - u32 intclr_fall_shift; - u32 intclr_rise_shift; - u32 intclr_fall_mask; - u32 intclr_rise_mask; u32 emul_con; u32 emul_temp_shift; u32 emul_time_shift; - u32 emul_time_mask; u32 tmu_irqstatus; u32 tmu_pmin; @@ -250,11 +177,12 @@ struct exynos_tmu_registers { * 1 = enable trigger_level[] interrupt, * 0 = disable trigger_level[] interrupt * @max_trigger_level: max trigger level supported by the TMU + * @non_hw_trigger_levels: number of defined non-hardware trigger levels * @gain: gain of amplifier in the positive-TC generator block - * 0 <= gain <= 15 + * 0 < gain <= 15 * @reference_voltage: reference voltage of amplifier * in the positive-TC generator block - * 0 <= reference_voltage <= 31 + * 0 < reference_voltage <= 31 * @noise_cancel_mode: noise cancellation mode * 000, 100, 101, 110 and 111 can be different modes * @type: determines the type of SOC @@ -265,8 +193,8 @@ struct exynos_tmu_registers { * @second_point_trim: temp value of the second point trimming * @default_temp_offset: default temperature offset in case of no trimming * @test_mux; information if SoC supports test MUX + * @triminfo_reload: reload value to read TRIMINFO register * @cal_type: calibration type for temperature - * @cal_mode: calibration mode for temperature * @freq_clip_table: Table representing frequency reduction percentage. * @freq_tab_count: Count of the above table as frequency reduction may * applicable to only some of the trigger levels. @@ -284,6 +212,7 @@ struct exynos_tmu_platform_data { enum trigger_type trigger_type[MAX_TRIP_COUNT]; bool trigger_enable[MAX_TRIP_COUNT]; u8 max_trigger_level; + u8 non_hw_trigger_levels; u8 gain; u8 reference_voltage; u8 noise_cancel_mode; @@ -295,9 +224,9 @@ struct exynos_tmu_platform_data { u8 second_point_trim; u8 default_temp_offset; u8 test_mux; + u8 triminfo_reload[MAX_TRIMINFO_CTRL_REG]; enum calibration_type cal_type; - enum calibration_mode cal_mode; enum soc_type type; struct freq_clip_table freq_tab[4]; unsigned int freq_tab_count; diff --git a/drivers/thermal/samsung/exynos_tmu_data.c b/drivers/thermal/samsung/exynos_tmu_data.c index aa8e0de..2683d28 100644 --- a/drivers/thermal/samsung/exynos_tmu_data.c +++ b/drivers/thermal/samsung/exynos_tmu_data.c @@ -27,14 +27,7 @@ #if defined(CONFIG_CPU_EXYNOS4210) static const struct exynos_tmu_registers exynos4210_tmu_registers = { .triminfo_data = EXYNOS_TMU_REG_TRIMINFO, - .triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT, - .triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT, .tmu_ctrl = EXYNOS_TMU_REG_CONTROL, - .buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT, - .buf_vref_sel_mask = EXYNOS_TMU_REF_VOLTAGE_MASK, - .buf_slope_sel_shift = EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT, - .buf_slope_sel_mask = EXYNOS_TMU_BUF_SLOPE_SEL_MASK, - .core_en_shift = EXYNOS_TMU_CORE_EN_SHIFT, .tmu_status = EXYNOS_TMU_REG_STATUS, .tmu_cur_temp = EXYNOS_TMU_REG_CURRENT_TEMP, .threshold_temp = EXYNOS4210_TMU_REG_THRESHOLD_TEMP, @@ -46,7 +39,6 @@ static const struct exynos_tmu_registers exynos4210_tmu_registers = { .inten_rise3_shift = EXYNOS_TMU_INTEN_RISE3_SHIFT, .tmu_intstat = EXYNOS_TMU_REG_INTSTAT, .tmu_intclear = EXYNOS_TMU_REG_INTCLEAR, - .intclr_rise_mask = EXYNOS4210_TMU_TRIG_LEVEL_MASK, }; struct exynos_tmu_init_data const exynos4210_default_tmu_data = { @@ -64,6 +56,7 @@ struct exynos_tmu_init_data const exynos4210_default_tmu_data = { .trigger_type[1] = THROTTLE_ACTIVE, .trigger_type[2] = SW_TRIP, .max_trigger_level = 4, + .non_hw_trigger_levels = 3, .gain = 15, .reference_voltage = 7, .cal_type = TYPE_ONE_POINT_TRIMMING, @@ -93,18 +86,14 @@ struct exynos_tmu_init_data const exynos4210_default_tmu_data = { #if defined(CONFIG_SOC_EXYNOS3250) static const struct exynos_tmu_registers exynos3250_tmu_registers = { .triminfo_data = EXYNOS_TMU_REG_TRIMINFO, - .triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT, - .triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT, + .triminfo_ctrl[0] = EXYNOS_TMU_TRIMINFO_CON1, + .triminfo_ctrl[1] = EXYNOS_TMU_TRIMINFO_CON2, + .triminfo_ctrl_count = 2, .tmu_ctrl = EXYNOS_TMU_REG_CONTROL, .test_mux_addr_shift = EXYNOS4412_MUX_ADDR_SHIFT, - .buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT, - .buf_vref_sel_mask = EXYNOS_TMU_REF_VOLTAGE_MASK, .therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT, .therm_trip_mode_mask = EXYNOS_TMU_TRIP_MODE_MASK, .therm_trip_en_shift = EXYNOS_TMU_THERM_TRIP_EN_SHIFT, - .buf_slope_sel_shift = EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT, - .buf_slope_sel_mask = EXYNOS_TMU_BUF_SLOPE_SEL_MASK, - .core_en_shift = EXYNOS_TMU_CORE_EN_SHIFT, .tmu_status = EXYNOS_TMU_REG_STATUS, .tmu_cur_temp = EXYNOS_TMU_REG_CURRENT_TEMP, .threshold_th0 = EXYNOS_THD_TEMP_RISE, @@ -116,14 +105,9 @@ static const struct exynos_tmu_registers exynos3250_tmu_registers = { .inten_fall0_shift = EXYNOS_TMU_INTEN_FALL0_SHIFT, .tmu_intstat = EXYNOS_TMU_REG_INTSTAT, .tmu_intclear = EXYNOS_TMU_REG_INTCLEAR, - .intclr_fall_shift = EXYNOS_TMU_CLEAR_FALL_INT_SHIFT, - .intclr_rise_shift = EXYNOS_TMU_RISE_INT_SHIFT, - .intclr_rise_mask = EXYNOS_TMU_RISE_INT_MASK, - .intclr_fall_mask = EXYNOS_TMU_FALL_INT_MASK, .emul_con = EXYNOS_EMUL_CON, .emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT, .emul_time_shift = EXYNOS_EMUL_TIME_SHIFT, - .emul_time_mask = EXYNOS_EMUL_TIME_MASK, }; #define EXYNOS3250_TMU_DATA \ @@ -141,6 +125,7 @@ static const struct exynos_tmu_registers exynos3250_tmu_registers = { .trigger_type[2] = SW_TRIP, \ .trigger_type[3] = HW_TRIP, \ .max_trigger_level = 4, \ + .non_hw_trigger_levels = 3, \ .gain = 8, \ .reference_voltage = 16, \ .noise_cancel_mode = 4, \ @@ -160,8 +145,10 @@ static const struct exynos_tmu_registers exynos3250_tmu_registers = { .temp_level = 95, \ }, \ .freq_tab_count = 2, \ + .triminfo_reload[0] = EXYNOS_TRIMINFO_RELOAD_ENABLE, \ + .triminfo_reload[1] = EXYNOS_TRIMINFO_RELOAD_ENABLE, \ .registers = &exynos3250_tmu_registers, \ - .features = (TMU_SUPPORT_EMULATION | \ + .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_TRIM_RELOAD | \ TMU_SUPPORT_FALLING_TRIP | TMU_SUPPORT_READY_STATUS | \ TMU_SUPPORT_EMUL_TIME) #endif @@ -182,20 +169,13 @@ struct exynos_tmu_init_data const exynos3250_default_tmu_data = { #if defined(CONFIG_SOC_EXYNOS4412) || defined(CONFIG_SOC_EXYNOS5250) static const struct exynos_tmu_registers exynos4412_tmu_registers = { .triminfo_data = EXYNOS_TMU_REG_TRIMINFO, - .triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT, - .triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT, - .triminfo_ctrl = EXYNOS_TMU_TRIMINFO_CON, - .triminfo_reload_shift = EXYNOS_TRIMINFO_RELOAD_SHIFT, + .triminfo_ctrl[0] = EXYNOS_TMU_TRIMINFO_CON2, + .triminfo_ctrl_count = 1, .tmu_ctrl = EXYNOS_TMU_REG_CONTROL, .test_mux_addr_shift = EXYNOS4412_MUX_ADDR_SHIFT, - .buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT, - .buf_vref_sel_mask = EXYNOS_TMU_REF_VOLTAGE_MASK, .therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT, .therm_trip_mode_mask = EXYNOS_TMU_TRIP_MODE_MASK, .therm_trip_en_shift = EXYNOS_TMU_THERM_TRIP_EN_SHIFT, - .buf_slope_sel_shift = EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT, - .buf_slope_sel_mask = EXYNOS_TMU_BUF_SLOPE_SEL_MASK, - .core_en_shift = EXYNOS_TMU_CORE_EN_SHIFT, .tmu_status = EXYNOS_TMU_REG_STATUS, .tmu_cur_temp = EXYNOS_TMU_REG_CURRENT_TEMP, .threshold_th0 = EXYNOS_THD_TEMP_RISE, @@ -208,14 +188,9 @@ static const struct exynos_tmu_registers exynos4412_tmu_registers = { .inten_fall0_shift = EXYNOS_TMU_INTEN_FALL0_SHIFT, .tmu_intstat = EXYNOS_TMU_REG_INTSTAT, .tmu_intclear = EXYNOS_TMU_REG_INTCLEAR, - .intclr_fall_shift = EXYNOS_TMU_CLEAR_FALL_INT_SHIFT, - .intclr_rise_shift = EXYNOS_TMU_RISE_INT_SHIFT, - .intclr_rise_mask = EXYNOS_TMU_RISE_INT_MASK, - .intclr_fall_mask = EXYNOS_TMU_FALL_INT_MASK, .emul_con = EXYNOS_EMUL_CON, .emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT, .emul_time_shift = EXYNOS_EMUL_TIME_SHIFT, - .emul_time_mask = EXYNOS_EMUL_TIME_MASK, }; #define EXYNOS4412_TMU_DATA \ @@ -233,6 +208,7 @@ static const struct exynos_tmu_registers exynos4412_tmu_registers = { .trigger_type[2] = SW_TRIP, \ .trigger_type[3] = HW_TRIP, \ .max_trigger_level = 4, \ + .non_hw_trigger_levels = 3, \ .gain = 8, \ .reference_voltage = 16, \ .noise_cancel_mode = 4, \ @@ -252,6 +228,7 @@ static const struct exynos_tmu_registers exynos4412_tmu_registers = { .temp_level = 95, \ }, \ .freq_tab_count = 2, \ + .triminfo_reload[0] = EXYNOS_TRIMINFO_RELOAD_ENABLE, \ .registers = &exynos4412_tmu_registers, \ .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_TRIM_RELOAD | \ TMU_SUPPORT_FALLING_TRIP | TMU_SUPPORT_READY_STATUS | \ @@ -286,18 +263,11 @@ struct exynos_tmu_init_data const exynos5250_default_tmu_data = { #if defined(CONFIG_SOC_EXYNOS5260) static const struct exynos_tmu_registers exynos5260_tmu_registers = { .triminfo_data = EXYNOS_TMU_REG_TRIMINFO, - .triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT, - .triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT, .tmu_ctrl = EXYNOS_TMU_REG_CONTROL, .tmu_ctrl = EXYNOS_TMU_REG_CONTROL1, - .buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT, - .buf_vref_sel_mask = EXYNOS_TMU_REF_VOLTAGE_MASK, .therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT, .therm_trip_mode_mask = EXYNOS_TMU_TRIP_MODE_MASK, .therm_trip_en_shift = EXYNOS_TMU_THERM_TRIP_EN_SHIFT, - .buf_slope_sel_shift = EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT, - .buf_slope_sel_mask = EXYNOS_TMU_BUF_SLOPE_SEL_MASK, - .core_en_shift = EXYNOS_TMU_CORE_EN_SHIFT, .tmu_status = EXYNOS_TMU_REG_STATUS, .tmu_cur_temp = EXYNOS_TMU_REG_CURRENT_TEMP, .threshold_th0 = EXYNOS_THD_TEMP_RISE, @@ -310,14 +280,9 @@ static const struct exynos_tmu_registers exynos5260_tmu_registers = { .inten_fall0_shift = EXYNOS_TMU_INTEN_FALL0_SHIFT, .tmu_intstat = EXYNOS5260_TMU_REG_INTSTAT, .tmu_intclear = EXYNOS5260_TMU_REG_INTCLEAR, - .intclr_fall_shift = EXYNOS5420_TMU_CLEAR_FALL_INT_SHIFT, - .intclr_rise_shift = EXYNOS_TMU_RISE_INT_SHIFT, - .intclr_rise_mask = EXYNOS5260_TMU_RISE_INT_MASK, - .intclr_fall_mask = EXYNOS5260_TMU_FALL_INT_MASK, .emul_con = EXYNOS5260_EMUL_CON, .emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT, .emul_time_shift = EXYNOS_EMUL_TIME_SHIFT, - .emul_time_mask = EXYNOS_EMUL_TIME_MASK, }; #define __EXYNOS5260_TMU_DATA \ @@ -335,6 +300,7 @@ static const struct exynos_tmu_registers exynos5260_tmu_registers = { .trigger_type[2] = SW_TRIP, \ .trigger_type[3] = HW_TRIP, \ .max_trigger_level = 4, \ + .non_hw_trigger_levels = 3, \ .gain = 8, \ .reference_voltage = 16, \ .noise_cancel_mode = 4, \ @@ -359,9 +325,8 @@ static const struct exynos_tmu_registers exynos5260_tmu_registers = { #define EXYNOS5260_TMU_DATA \ __EXYNOS5260_TMU_DATA \ .type = SOC_ARCH_EXYNOS5260, \ - .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_TRIM_RELOAD | \ - TMU_SUPPORT_FALLING_TRIP | TMU_SUPPORT_READY_STATUS | \ - TMU_SUPPORT_EMUL_TIME) + .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_FALLING_TRIP | \ + TMU_SUPPORT_READY_STATUS | TMU_SUPPORT_EMUL_TIME) struct exynos_tmu_init_data const exynos5260_default_tmu_data = { .tmu_data = { @@ -378,17 +343,10 @@ struct exynos_tmu_init_data const exynos5260_default_tmu_data = { #if defined(CONFIG_SOC_EXYNOS5420) static const struct exynos_tmu_registers exynos5420_tmu_registers = { .triminfo_data = EXYNOS_TMU_REG_TRIMINFO, - .triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT, - .triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT, .tmu_ctrl = EXYNOS_TMU_REG_CONTROL, - .buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT, - .buf_vref_sel_mask = EXYNOS_TMU_REF_VOLTAGE_MASK, .therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT, .therm_trip_mode_mask = EXYNOS_TMU_TRIP_MODE_MASK, .therm_trip_en_shift = EXYNOS_TMU_THERM_TRIP_EN_SHIFT, - .buf_slope_sel_shift = EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT, - .buf_slope_sel_mask = EXYNOS_TMU_BUF_SLOPE_SEL_MASK, - .core_en_shift = EXYNOS_TMU_CORE_EN_SHIFT, .tmu_status = EXYNOS_TMU_REG_STATUS, .tmu_cur_temp = EXYNOS_TMU_REG_CURRENT_TEMP, .threshold_th0 = EXYNOS_THD_TEMP_RISE, @@ -402,14 +360,9 @@ static const struct exynos_tmu_registers exynos5420_tmu_registers = { .inten_fall0_shift = EXYNOS_TMU_INTEN_FALL0_SHIFT, .tmu_intstat = EXYNOS_TMU_REG_INTSTAT, .tmu_intclear = EXYNOS_TMU_REG_INTCLEAR, - .intclr_fall_shift = EXYNOS5420_TMU_CLEAR_FALL_INT_SHIFT, - .intclr_rise_shift = EXYNOS_TMU_RISE_INT_SHIFT, - .intclr_rise_mask = EXYNOS_TMU_RISE_INT_MASK, - .intclr_fall_mask = EXYNOS_TMU_FALL_INT_MASK, .emul_con = EXYNOS_EMUL_CON, .emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT, .emul_time_shift = EXYNOS_EMUL_TIME_SHIFT, - .emul_time_mask = EXYNOS_EMUL_TIME_MASK, }; #define __EXYNOS5420_TMU_DATA \ @@ -427,6 +380,7 @@ static const struct exynos_tmu_registers exynos5420_tmu_registers = { .trigger_type[2] = SW_TRIP, \ .trigger_type[3] = HW_TRIP, \ .max_trigger_level = 4, \ + .non_hw_trigger_levels = 3, \ .gain = 8, \ .reference_voltage = 16, \ .noise_cancel_mode = 4, \ @@ -451,16 +405,15 @@ static const struct exynos_tmu_registers exynos5420_tmu_registers = { #define EXYNOS5420_TMU_DATA \ __EXYNOS5420_TMU_DATA \ .type = SOC_ARCH_EXYNOS5250, \ - .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_TRIM_RELOAD | \ - TMU_SUPPORT_FALLING_TRIP | TMU_SUPPORT_READY_STATUS | \ - TMU_SUPPORT_EMUL_TIME) + .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_FALLING_TRIP | \ + TMU_SUPPORT_READY_STATUS | TMU_SUPPORT_EMUL_TIME) #define EXYNOS5420_TMU_DATA_SHARED \ __EXYNOS5420_TMU_DATA \ .type = SOC_ARCH_EXYNOS5420_TRIMINFO, \ - .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_TRIM_RELOAD | \ - TMU_SUPPORT_FALLING_TRIP | TMU_SUPPORT_READY_STATUS | \ - TMU_SUPPORT_EMUL_TIME | TMU_SUPPORT_ADDRESS_MULTIPLE) + .features = (TMU_SUPPORT_EMULATION | TMU_SUPPORT_FALLING_TRIP | \ + TMU_SUPPORT_READY_STATUS | TMU_SUPPORT_EMUL_TIME | \ + TMU_SUPPORT_ADDRESS_MULTIPLE) struct exynos_tmu_init_data const exynos5420_default_tmu_data = { .tmu_data = { @@ -477,19 +430,10 @@ struct exynos_tmu_init_data const exynos5420_default_tmu_data = { #if defined(CONFIG_SOC_EXYNOS5440) static const struct exynos_tmu_registers exynos5440_tmu_registers = { .triminfo_data = EXYNOS5440_TMU_S0_7_TRIM, - .triminfo_25_shift = EXYNOS_TRIMINFO_25_SHIFT, - .triminfo_85_shift = EXYNOS_TRIMINFO_85_SHIFT, .tmu_ctrl = EXYNOS5440_TMU_S0_7_CTRL, - .buf_vref_sel_shift = EXYNOS_TMU_REF_VOLTAGE_SHIFT, - .buf_vref_sel_mask = EXYNOS_TMU_REF_VOLTAGE_MASK, .therm_trip_mode_shift = EXYNOS_TMU_TRIP_MODE_SHIFT, .therm_trip_mode_mask = EXYNOS_TMU_TRIP_MODE_MASK, .therm_trip_en_shift = EXYNOS_TMU_THERM_TRIP_EN_SHIFT, - .buf_slope_sel_shift = EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT, - .buf_slope_sel_mask = EXYNOS_TMU_BUF_SLOPE_SEL_MASK, - .calib_mode_shift = EXYNOS_TMU_CALIB_MODE_SHIFT, - .calib_mode_mask = EXYNOS_TMU_CALIB_MODE_MASK, - .core_en_shift = EXYNOS_TMU_CORE_EN_SHIFT, .tmu_status = EXYNOS5440_TMU_S0_7_STATUS, .tmu_cur_temp = EXYNOS5440_TMU_S0_7_TEMP, .threshold_th0 = EXYNOS5440_TMU_S0_7_TH0, @@ -504,10 +448,6 @@ static const struct exynos_tmu_registers exynos5440_tmu_registers = { .inten_fall0_shift = EXYNOS5440_TMU_INTEN_FALL0_SHIFT, .tmu_intstat = EXYNOS5440_TMU_S0_7_IRQ, .tmu_intclear = EXYNOS5440_TMU_S0_7_IRQ, - .intclr_fall_shift = EXYNOS5440_TMU_CLEAR_FALL_INT_SHIFT, - .intclr_rise_shift = EXYNOS5440_TMU_RISE_INT_SHIFT, - .intclr_rise_mask = EXYNOS5440_TMU_RISE_INT_MASK, - .intclr_fall_mask = EXYNOS5440_TMU_FALL_INT_MASK, .tmu_irqstatus = EXYNOS5440_TMU_IRQ_STATUS, .emul_con = EXYNOS5440_TMU_S0_7_DEBUG, .emul_temp_shift = EXYNOS_EMUL_DATA_SHIFT, @@ -521,11 +461,11 @@ static const struct exynos_tmu_registers exynos5440_tmu_registers = { .trigger_type[0] = SW_TRIP, \ .trigger_type[4] = HW_TRIP, \ .max_trigger_level = 5, \ + .non_hw_trigger_levels = 1, \ .gain = 5, \ .reference_voltage = 16, \ .noise_cancel_mode = 4, \ .cal_type = TYPE_ONE_POINT_TRIMMING, \ - .cal_mode = 0, \ .efuse_value = 0x5b2d, \ .min_efuse_value = 16, \ .max_efuse_value = 76, \ diff --git a/drivers/thermal/samsung/exynos_tmu_data.h b/drivers/thermal/samsung/exynos_tmu_data.h index f0979e5..65e2ea6 100644 --- a/drivers/thermal/samsung/exynos_tmu_data.h +++ b/drivers/thermal/samsung/exynos_tmu_data.h @@ -39,55 +39,31 @@ #define EXYNOS_TMU_BUF_SLOPE_SEL_SHIFT 8 #define EXYNOS_TMU_CORE_EN_SHIFT 0 +/* Exynos3250 specific registers */ +#define EXYNOS_TMU_TRIMINFO_CON1 0x10 + /* Exynos4210 specific registers */ #define EXYNOS4210_TMU_REG_THRESHOLD_TEMP 0x44 #define EXYNOS4210_TMU_REG_TRIG_LEVEL0 0x50 -#define EXYNOS4210_TMU_REG_TRIG_LEVEL1 0x54 -#define EXYNOS4210_TMU_REG_TRIG_LEVEL2 0x58 -#define EXYNOS4210_TMU_REG_TRIG_LEVEL3 0x5C -#define EXYNOS4210_TMU_REG_PAST_TEMP0 0x60 -#define EXYNOS4210_TMU_REG_PAST_TEMP1 0x64 -#define EXYNOS4210_TMU_REG_PAST_TEMP2 0x68 -#define EXYNOS4210_TMU_REG_PAST_TEMP3 0x6C - -#define EXYNOS4210_TMU_TRIG_LEVEL0_MASK 0x1 -#define EXYNOS4210_TMU_TRIG_LEVEL1_MASK 0x10 -#define EXYNOS4210_TMU_TRIG_LEVEL2_MASK 0x100 -#define EXYNOS4210_TMU_TRIG_LEVEL3_MASK 0x1000 -#define EXYNOS4210_TMU_TRIG_LEVEL_MASK 0x1111 -#define EXYNOS4210_TMU_INTCLEAR_VAL 0x1111 - -/* Exynos5250 and Exynos4412 specific registers */ -#define EXYNOS_TMU_TRIMINFO_CON 0x14 + +/* Exynos5250, Exynos4412, Exynos3250 specific registers */ +#define EXYNOS_TMU_TRIMINFO_CON2 0x14 #define EXYNOS_THD_TEMP_RISE 0x50 #define EXYNOS_THD_TEMP_FALL 0x54 #define EXYNOS_EMUL_CON 0x80 -#define EXYNOS_TRIMINFO_RELOAD_SHIFT 1 +#define EXYNOS_TRIMINFO_RELOAD_ENABLE 1 #define EXYNOS_TRIMINFO_25_SHIFT 0 #define EXYNOS_TRIMINFO_85_SHIFT 8 -#define EXYNOS_TMU_RISE_INT_MASK 0x111 -#define EXYNOS_TMU_RISE_INT_SHIFT 0 -#define EXYNOS_TMU_FALL_INT_MASK 0x111 -#define EXYNOS_TMU_CLEAR_RISE_INT 0x111 -#define EXYNOS_TMU_CLEAR_FALL_INT (0x111 << 12) -#define EXYNOS_TMU_CLEAR_FALL_INT_SHIFT 12 -#define EXYNOS5420_TMU_CLEAR_FALL_INT_SHIFT 16 -#define EXYNOS5440_TMU_CLEAR_FALL_INT_SHIFT 4 #define EXYNOS_TMU_TRIP_MODE_SHIFT 13 #define EXYNOS_TMU_TRIP_MODE_MASK 0x7 #define EXYNOS_TMU_THERM_TRIP_EN_SHIFT 12 -#define EXYNOS_TMU_CALIB_MODE_SHIFT 4 -#define EXYNOS_TMU_CALIB_MODE_MASK 0x3 #define EXYNOS_TMU_INTEN_RISE0_SHIFT 0 #define EXYNOS_TMU_INTEN_RISE1_SHIFT 4 #define EXYNOS_TMU_INTEN_RISE2_SHIFT 8 #define EXYNOS_TMU_INTEN_RISE3_SHIFT 12 #define EXYNOS_TMU_INTEN_FALL0_SHIFT 16 -#define EXYNOS_TMU_INTEN_FALL1_SHIFT 20 -#define EXYNOS_TMU_INTEN_FALL2_SHIFT 24 -#define EXYNOS_TMU_INTEN_FALL3_SHIFT 28 #define EXYNOS_EMUL_TIME 0x57F0 #define EXYNOS_EMUL_TIME_MASK 0xffff @@ -103,10 +79,6 @@ #define EXYNOS5260_TMU_REG_INTEN 0xC0 #define EXYNOS5260_TMU_REG_INTSTAT 0xC4 #define EXYNOS5260_TMU_REG_INTCLEAR 0xC8 -#define EXYNOS5260_TMU_CLEAR_RISE_INT 0x1111 -#define EXYNOS5260_TMU_CLEAR_FALL_INT (0x1111 << 16) -#define EXYNOS5260_TMU_RISE_INT_MASK 0x1111 -#define EXYNOS5260_TMU_FALL_INT_MASK 0x1111 #define EXYNOS5260_EMUL_CON 0x100 /* Exynos4412 specific */ @@ -122,29 +94,17 @@ #define EXYNOS5440_TMU_S0_7_TH0 0x110 #define EXYNOS5440_TMU_S0_7_TH1 0x130 #define EXYNOS5440_TMU_S0_7_TH2 0x150 -#define EXYNOS5440_TMU_S0_7_EVTEN 0x1F0 #define EXYNOS5440_TMU_S0_7_IRQEN 0x210 #define EXYNOS5440_TMU_S0_7_IRQ 0x230 /* exynos5440 common registers */ #define EXYNOS5440_TMU_IRQ_STATUS 0x000 #define EXYNOS5440_TMU_PMIN 0x004 -#define EXYNOS5440_TMU_TEMP 0x008 -#define EXYNOS5440_TMU_RISE_INT_MASK 0xf -#define EXYNOS5440_TMU_RISE_INT_SHIFT 0 -#define EXYNOS5440_TMU_FALL_INT_MASK 0xf #define EXYNOS5440_TMU_INTEN_RISE0_SHIFT 0 #define EXYNOS5440_TMU_INTEN_RISE1_SHIFT 1 #define EXYNOS5440_TMU_INTEN_RISE2_SHIFT 2 #define EXYNOS5440_TMU_INTEN_RISE3_SHIFT 3 #define EXYNOS5440_TMU_INTEN_FALL0_SHIFT 4 -#define EXYNOS5440_TMU_INTEN_FALL1_SHIFT 5 -#define EXYNOS5440_TMU_INTEN_FALL2_SHIFT 6 -#define EXYNOS5440_TMU_INTEN_FALL3_SHIFT 7 -#define EXYNOS5440_TMU_TH_RISE0_SHIFT 0 -#define EXYNOS5440_TMU_TH_RISE1_SHIFT 8 -#define EXYNOS5440_TMU_TH_RISE2_SHIFT 16 -#define EXYNOS5440_TMU_TH_RISE3_SHIFT 24 #define EXYNOS5440_TMU_TH_RISE4_SHIFT 24 #define EXYNOS5440_EFUSE_SWAP_OFFSET 8 diff --git a/drivers/thermal/thermal_core.c b/drivers/thermal/thermal_core.c index 9bf10aa..43b9070 100644 --- a/drivers/thermal/thermal_core.c +++ b/drivers/thermal/thermal_core.c @@ -1575,8 +1575,7 @@ struct thermal_zone_device *thermal_zone_device_register(const char *type, thermal_zone_device_update(tz); - if (!result) - return tz; + return tz; unregister: release_idr(&thermal_tz_idr, &thermal_idr_lock, tz->id); diff --git a/drivers/tty/n_tty.c b/drivers/tty/n_tty.c index 89c4cee..2e900a9 100644 --- a/drivers/tty/n_tty.c +++ b/drivers/tty/n_tty.c @@ -2413,12 +2413,17 @@ static unsigned int n_tty_poll(struct tty_struct *tty, struct file *file, poll_wait(file, &tty->read_wait, wait); poll_wait(file, &tty->write_wait, wait); + if (test_bit(TTY_OTHER_CLOSED, &tty->flags)) + mask |= POLLHUP; if (input_available_p(tty, 1)) mask |= POLLIN | POLLRDNORM; + else if (mask & POLLHUP) { + tty_flush_to_ldisc(tty); + if (input_available_p(tty, 1)) + mask |= POLLIN | POLLRDNORM; + } if (tty->packet && tty->link->ctrl_status) mask |= POLLPRI | POLLIN | POLLRDNORM; - if (test_bit(TTY_OTHER_CLOSED, &tty->flags)) - mask |= POLLHUP; if (tty_hung_up_p(file)) mask |= POLLHUP; if (!(mask & (POLLHUP | POLLIN | POLLRDNORM))) { diff --git a/drivers/tty/serial/8250/8250_mtk.c b/drivers/tty/serial/8250/8250_mtk.c index 8f37d57..de7aae5 100644 --- a/drivers/tty/serial/8250/8250_mtk.c +++ b/drivers/tty/serial/8250/8250_mtk.c @@ -81,7 +81,7 @@ mtk8250_set_termios(struct uart_port *port, struct ktermios *termios, /* Set to highest baudrate supported */ if (baud >= 1152000) baud = 921600; - quot = DIV_ROUND_CLOSEST(port->uartclk, 256 * baud); + quot = (port->uartclk / (256 * baud)) + 1; } /* diff --git a/drivers/tty/serial/of_serial.c b/drivers/tty/serial/of_serial.c index 8bc2563..56982da4 100644 --- a/drivers/tty/serial/of_serial.c +++ b/drivers/tty/serial/of_serial.c @@ -158,7 +158,7 @@ static int of_platform_serial_probe(struct platform_device *ofdev) if (of_find_property(ofdev->dev.of_node, "used-by-rtas", NULL)) return -EBUSY; - info = kmalloc(sizeof(*info), GFP_KERNEL); + info = kzalloc(sizeof(*info), GFP_KERNEL); if (info == NULL) return -ENOMEM; diff --git a/drivers/tty/serial/serial_core.c b/drivers/tty/serial/serial_core.c index df3a8c7..eaeb9a0 100644 --- a/drivers/tty/serial/serial_core.c +++ b/drivers/tty/serial/serial_core.c @@ -363,7 +363,7 @@ uart_get_baud_rate(struct uart_port *port, struct ktermios *termios, * The spd_hi, spd_vhi, spd_shi, spd_warp kludge... * Die! Die! Die! */ - if (baud == 38400) + if (try == 0 && baud == 38400) baud = altbaud; /* diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c index 16a2c02..0508a1d 100644 --- a/drivers/tty/tty_io.c +++ b/drivers/tty/tty_io.c @@ -1709,6 +1709,8 @@ int tty_release(struct inode *inode, struct file *filp) int pty_master, tty_closing, o_tty_closing, do_sleep; int idx; char buf[64]; + long timeout = 0; + int once = 1; if (tty_paranoia_check(tty, inode, __func__)) return 0; @@ -1789,11 +1791,18 @@ int tty_release(struct inode *inode, struct file *filp) if (!do_sleep) break; - printk(KERN_WARNING "%s: %s: read/write wait queue active!\n", - __func__, tty_name(tty, buf)); + if (once) { + once = 0; + printk(KERN_WARNING "%s: %s: read/write wait queue active!\n", + __func__, tty_name(tty, buf)); + } tty_unlock_pair(tty, o_tty); mutex_unlock(&tty_mutex); - schedule(); + schedule_timeout_killable(timeout); + if (timeout < 120 * HZ) + timeout = 2 * timeout + 1; + else + timeout = MAX_SCHEDULE_TIMEOUT; } /* diff --git a/drivers/tty/vt/consolemap.c b/drivers/tty/vt/consolemap.c index 610b720..59b25e0 100644 --- a/drivers/tty/vt/consolemap.c +++ b/drivers/tty/vt/consolemap.c @@ -539,6 +539,12 @@ int con_set_unimap(struct vc_data *vc, ushort ct, struct unipair __user *list) /* Save original vc_unipagdir_loc in case we allocate a new one */ p = *vc->vc_uni_pagedir_loc; + + if (!p) { + err = -EINVAL; + + goto out_unlock; + } if (p->refcount > 1) { int j, k; @@ -623,6 +629,7 @@ int con_set_unimap(struct vc_data *vc, ushort ct, struct unipair __user *list) set_inverse_transl(vc, p, i); /* Update inverse translations */ set_inverse_trans_unicode(vc, p); +out_unlock: console_unlock(); return err; } diff --git a/drivers/usb/chipidea/host.c b/drivers/usb/chipidea/host.c index 4f8eb40..48731d0 100644 --- a/drivers/usb/chipidea/host.c +++ b/drivers/usb/chipidea/host.c @@ -34,6 +34,44 @@ static struct hc_driver __read_mostly ci_ehci_hc_driver; +struct ehci_ci_priv { + struct regulator *reg_vbus; +}; + +static int ehci_ci_portpower(struct usb_hcd *hcd, int portnum, bool enable) +{ + struct ehci_hcd *ehci = hcd_to_ehci(hcd); + struct ehci_ci_priv *priv = (struct ehci_ci_priv *)ehci->priv; + struct device *dev = hcd->self.controller; + struct ci_hdrc *ci = dev_get_drvdata(dev); + int ret = 0; + int port = HCS_N_PORTS(ehci->hcs_params); + + if (priv->reg_vbus && !ci_otg_is_fsm_mode(ci)) { + if (port > 1) { + dev_warn(dev, + "Not support multi-port regulator control\n"); + return 0; + } + if (enable) + ret = regulator_enable(priv->reg_vbus); + else + ret = regulator_disable(priv->reg_vbus); + if (ret) { + dev_err(dev, + "Failed to %s vbus regulator, ret=%d\n", + enable ? "enable" : "disable", ret); + return ret; + } + } + return 0; +}; + +static const struct ehci_driver_overrides ehci_ci_overrides = { + .extra_priv_size = sizeof(struct ehci_ci_priv), + .port_power = ehci_ci_portpower, +}; + static irqreturn_t host_irq(struct ci_hdrc *ci) { return usb_hcd_irq(ci->irq, ci->hcd); @@ -43,6 +81,7 @@ static int host_start(struct ci_hdrc *ci) { struct usb_hcd *hcd; struct ehci_hcd *ehci; + struct ehci_ci_priv *priv; int ret; if (usb_disabled()) @@ -71,23 +110,15 @@ static int host_start(struct ci_hdrc *ci) ehci->has_tdi_phy_lpm = ci->hw_bank.lpm; ehci->imx28_write_fix = ci->imx28_write_fix; - /* - * vbus is always on if host is not in OTG FSM mode, - * otherwise should be controlled by OTG FSM - */ - if (ci->platdata->reg_vbus && !ci_otg_is_fsm_mode(ci)) { - ret = regulator_enable(ci->platdata->reg_vbus); - if (ret) { - dev_err(ci->dev, - "Failed to enable vbus regulator, ret=%d\n", - ret); - goto put_hcd; - } - } + priv = (struct ehci_ci_priv *)ehci->priv; + priv->reg_vbus = NULL; + + if (ci->platdata->reg_vbus) + priv->reg_vbus = ci->platdata->reg_vbus; ret = usb_add_hcd(hcd, 0, 0); if (ret) { - goto disable_reg; + goto put_hcd; } else { struct usb_otg *otg = &ci->otg; @@ -104,10 +135,6 @@ static int host_start(struct ci_hdrc *ci) return ret; -disable_reg: - if (ci->platdata->reg_vbus && !ci_otg_is_fsm_mode(ci)) - regulator_disable(ci->platdata->reg_vbus); - put_hcd: usb_put_hcd(hcd); @@ -121,8 +148,6 @@ static void host_stop(struct ci_hdrc *ci) if (hcd) { usb_remove_hcd(hcd); usb_put_hcd(hcd); - if (ci->platdata->reg_vbus && !ci_otg_is_fsm_mode(ci)) - regulator_disable(ci->platdata->reg_vbus); } } @@ -150,7 +175,7 @@ int ci_hdrc_host_init(struct ci_hdrc *ci) rdrv->name = "host"; ci->roles[CI_ROLE_HOST] = rdrv; - ehci_init_driver(&ci_ehci_hc_driver, NULL); + ehci_init_driver(&ci_ehci_hc_driver, &ehci_ci_overrides); return 0; } diff --git a/drivers/usb/chipidea/otg_fsm.c b/drivers/usb/chipidea/otg_fsm.c index 3c2ab1a..368cc8e 100644 --- a/drivers/usb/chipidea/otg_fsm.c +++ b/drivers/usb/chipidea/otg_fsm.c @@ -795,11 +795,8 @@ int ci_hdrc_otg_fsm_init(struct ci_hdrc *ci) ci->fsm_timer = devm_kzalloc(ci->dev, sizeof(struct ci_otg_fsm_timer_list), GFP_KERNEL); - if (!ci->fsm_timer) { - dev_err(ci->dev, - "Failed to allocate timer structure for ci hdrc otg!\n"); + if (!ci->fsm_timer) return -ENOMEM; - } INIT_LIST_HEAD(&ci->fsm_timer->active_timers); retval = ci_otg_init_timers(ci); diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index e934e19..546a17e8 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -60,6 +60,9 @@ static struct acm *acm_table[ACM_TTY_MINORS]; static DEFINE_MUTEX(acm_table_lock); +static void acm_tty_set_termios(struct tty_struct *tty, + struct ktermios *termios_old); + /* * acm_table accessors */ @@ -145,8 +148,15 @@ static int acm_ctrl_msg(struct acm *acm, int request, int value, /* devices aren't required to support these requests. * the cdc acm descriptor tells whether they do... */ -#define acm_set_control(acm, control) \ - acm_ctrl_msg(acm, USB_CDC_REQ_SET_CONTROL_LINE_STATE, control, NULL, 0) +static inline int acm_set_control(struct acm *acm, int control) +{ + if (acm->quirks & QUIRK_CONTROL_LINE_STATE) + return -EOPNOTSUPP; + + return acm_ctrl_msg(acm, USB_CDC_REQ_SET_CONTROL_LINE_STATE, + control, NULL, 0); +} + #define acm_set_line(acm, line) \ acm_ctrl_msg(acm, USB_CDC_REQ_SET_LINE_CODING, 0, line, sizeof *(line)) #define acm_send_break(acm, ms) \ @@ -554,6 +564,8 @@ static int acm_port_activate(struct tty_port *port, struct tty_struct *tty) goto error_submit_urb; } + acm_tty_set_termios(tty, NULL); + /* * Unthrottle device in case the TTY was closed while throttled. */ @@ -980,11 +992,12 @@ static void acm_tty_set_termios(struct tty_struct *tty, /* FIXME: Needs to clear unsupported bits in the termios */ acm->clocal = ((termios->c_cflag & CLOCAL) != 0); - if (!newline.dwDTERate) { + if (C_BAUD(tty) == B0) { newline.dwDTERate = acm->line.dwDTERate; newctrl &= ~ACM_CTRL_DTR; - } else + } else if (termios_old && (termios_old->c_cflag & CBAUD) == B0) { newctrl |= ACM_CTRL_DTR; + } if (newctrl != acm->ctrlout) acm_set_control(acm, acm->ctrlout = newctrl); @@ -1144,8 +1157,6 @@ static int acm_probe(struct usb_interface *intf, case USB_CDC_CALL_MANAGEMENT_TYPE: call_management_function = buffer[3]; call_interface_num = buffer[4]; - if ((quirks & NOT_A_MODEM) == 0 && (call_management_function & 3) != 3) - dev_err(&intf->dev, "This device cannot do calls on its own. It is not a modem.\n"); break; default: /* there are LOTS more CDC descriptors that @@ -1184,10 +1195,11 @@ next_desc: } else { control_interface = usb_ifnum_to_if(usb_dev, union_header->bMasterInterface0); data_interface = usb_ifnum_to_if(usb_dev, (data_interface_num = union_header->bSlaveInterface0)); - if (!control_interface || !data_interface) { - dev_dbg(&intf->dev, "no interfaces\n"); - return -ENODEV; - } + } + + if (!control_interface || !data_interface) { + dev_dbg(&intf->dev, "no interfaces\n"); + return -ENODEV; } if (data_interface_num != call_interface_num) @@ -1314,6 +1326,7 @@ made_compressed_probe: tty_port_init(&acm->port); acm->port.ops = &acm_port_ops; init_usb_anchor(&acm->delayed); + acm->quirks = quirks; buf = usb_alloc_coherent(usb_dev, ctrlsize, GFP_KERNEL, &acm->ctrl_dma); if (!buf) { @@ -1461,6 +1474,7 @@ alloc_fail8: &dev_attr_wCountryCodes); device_remove_file(&acm->control->dev, &dev_attr_iCountryCodeRelDate); + kfree(acm->country_codes); } device_remove_file(&acm->control->dev, &dev_attr_bmCapabilities); alloc_fail7: @@ -1681,6 +1695,9 @@ static const struct usb_device_id acm_ids[] = { { USB_DEVICE(0x0572, 0x1328), /* Shiro / Aztech USB MODEM UM-3100 */ .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ }, + { USB_DEVICE(0x20df, 0x0001), /* Simtec Electronics Entropy Key */ + .driver_info = QUIRK_CONTROL_LINE_STATE, }, + { USB_DEVICE(0x2184, 0x001c) }, /* GW Instek AFG-2225 */ { USB_DEVICE(0x22b8, 0x6425), /* Motorola MOTOMAGX phones */ }, /* Motorola H24 HSPA module: */ @@ -1796,11 +1813,6 @@ static const struct usb_device_id acm_ids[] = { /* NOTE: non-Nokia COMM/ACM/0xff is likely MSFT RNDIS... NOT a modem! */ - /* Support Lego NXT using pbLua firmware */ - { USB_DEVICE(0x0694, 0xff00), - .driver_info = NOT_A_MODEM, - }, - /* Support for Droids MuIn LCD */ { USB_DEVICE(0x04d8, 0x000b), .driver_info = NO_DATA_INTERFACE, diff --git a/drivers/usb/class/cdc-acm.h b/drivers/usb/class/cdc-acm.h index fc75651..ffeb3c8 100644 --- a/drivers/usb/class/cdc-acm.h +++ b/drivers/usb/class/cdc-acm.h @@ -121,6 +121,7 @@ struct acm { unsigned int throttle_req:1; /* throttle requested */ u8 bInterval; struct usb_anchor delayed; /* writes queued for a device about to be woken */ + unsigned long quirks; }; #define CDC_DATA_INTERFACE_TYPE 0x0a @@ -129,6 +130,6 @@ struct acm { #define NO_UNION_NORMAL BIT(0) #define SINGLE_RX_URB BIT(1) #define NO_CAP_LINE BIT(2) -#define NOT_A_MODEM BIT(3) #define NO_DATA_INTERFACE BIT(4) #define IGNORE_DEVICE BIT(5) +#define QUIRK_CONTROL_LINE_STATE BIT(6) diff --git a/drivers/usb/class/usbtmc.c b/drivers/usb/class/usbtmc.c index ec97840..960bc08 100644 --- a/drivers/usb/class/usbtmc.c +++ b/drivers/usb/class/usbtmc.c @@ -1104,10 +1104,8 @@ static int usbtmc_probe(struct usb_interface *intf, dev_dbg(&intf->dev, "%s called\n", __func__); data = devm_kzalloc(&intf->dev, sizeof(*data), GFP_KERNEL); - if (!data) { - dev_err(&intf->dev, "Unable to allocate kernel memory\n"); + if (!data) return -ENOMEM; - } data->intf = intf; data->id = id; diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 6a2a2fd..2f2118f 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -2060,6 +2060,8 @@ int usb_alloc_streams(struct usb_interface *interface, return -EINVAL; if (dev->speed != USB_SPEED_SUPER) return -EINVAL; + if (dev->state < USB_STATE_CONFIGURED) + return -ENODEV; for (i = 0; i < num_eps; i++) { /* Streams only apply to bulk endpoints. */ diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 11e80ac..c1dc42e 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -2543,11 +2543,14 @@ int usb_authorize_device(struct usb_device *usb_dev) "can't autoresume for authorization: %d\n", result); goto error_autoresume; } - result = usb_get_device_descriptor(usb_dev, sizeof(usb_dev->descriptor)); - if (result < 0) { - dev_err(&usb_dev->dev, "can't re-read device descriptor for " - "authorization: %d\n", result); - goto error_device_descriptor; + + if (usb_dev->wusb) { + result = usb_get_device_descriptor(usb_dev, sizeof(usb_dev->descriptor)); + if (result < 0) { + dev_err(&usb_dev->dev, "can't re-read device descriptor for " + "authorization: %d\n", result); + goto error_device_descriptor; + } } usb_dev->authorized = 1; @@ -3907,14 +3910,9 @@ static void usb_enable_link_state(struct usb_hcd *hcd, struct usb_device *udev, static int usb_disable_link_state(struct usb_hcd *hcd, struct usb_device *udev, enum usb3_link_state state) { - int feature; - switch (state) { case USB3_LPM_U1: - feature = USB_PORT_FEAT_U1_TIMEOUT; - break; case USB3_LPM_U2: - feature = USB_PORT_FEAT_U2_TIMEOUT; break; default: dev_warn(&udev->dev, "%s: Can't disable non-U1 or U2 state.\n", @@ -4468,9 +4466,6 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1, if (retval) goto fail; - if (hcd->usb_phy && !hdev->parent) - usb_phy_notify_connect(hcd->usb_phy, udev->speed); - /* * Some superspeed devices have finished the link training process * and attached to a superspeed hub port, but the device descriptor @@ -4627,8 +4622,7 @@ static void hub_port_connect(struct usb_hub *hub, int port1, u16 portstatus, /* Disconnect any existing devices under this port */ if (udev) { - if (hcd->usb_phy && !hdev->parent && - !(portstatus & USB_PORT_STAT_CONNECTION)) + if (hcd->usb_phy && !hdev->parent) usb_phy_notify_disconnect(hcd->usb_phy, udev->speed); usb_disconnect(&port_dev->child); } @@ -4783,6 +4777,10 @@ static void hub_port_connect(struct usb_hub *hub, int port1, u16 portstatus, port_dev->child = NULL; spin_unlock_irq(&device_state_lock); mutex_unlock(&usb_port_peer_mutex); + } else { + if (hcd->usb_phy && !hdev->parent) + usb_phy_notify_connect(hcd->usb_phy, + udev->speed); } } diff --git a/drivers/usb/core/quirks.c b/drivers/usb/core/quirks.c index 5ae883d..39b4081 100644 --- a/drivers/usb/core/quirks.c +++ b/drivers/usb/core/quirks.c @@ -97,6 +97,12 @@ static const struct usb_device_id usb_quirk_list[] = { { USB_DEVICE(0x04f3, 0x0089), .driver_info = USB_QUIRK_DEVICE_QUALIFIER }, + { USB_DEVICE(0x04f3, 0x009b), .driver_info = + USB_QUIRK_DEVICE_QUALIFIER }, + + { USB_DEVICE(0x04f3, 0x016f), .driver_info = + USB_QUIRK_DEVICE_QUALIFIER }, + /* Roland SC-8820 */ { USB_DEVICE(0x0582, 0x0007), .driver_info = USB_QUIRK_RESET_RESUME }, diff --git a/drivers/usb/dwc2/gadget.c b/drivers/usb/dwc2/gadget.c index 407f55c..200168e 100644 --- a/drivers/usb/dwc2/gadget.c +++ b/drivers/usb/dwc2/gadget.c @@ -2323,7 +2323,7 @@ irq_retry: u32 usb_status = readl(hsotg->regs + GOTGCTL); - dev_info(hsotg->dev, "%s: USBRst\n", __func__); + dev_dbg(hsotg->dev, "%s: USBRst\n", __func__); dev_dbg(hsotg->dev, "GNPTXSTS=%08x\n", readl(hsotg->regs + GNPTXSTS)); diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index a8a30b1..fafc628 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -234,7 +234,7 @@ config USB_EHCI_SH config USB_EHCI_EXYNOS tristate "EHCI support for Samsung S5P/EXYNOS SoC Series" - depends on PLAT_S5P || ARCH_EXYNOS + depends on ARCH_S5PV210 || ARCH_EXYNOS help Enable support for the Samsung Exynos SOC's on-chip EHCI controller. @@ -292,11 +292,15 @@ config USB_EHCI_HCD_PLATFORM If unsure, say N. config USB_OCTEON_EHCI - bool "Octeon on-chip EHCI support" + bool "Octeon on-chip EHCI support (DEPRECATED)" depends on CAVIUM_OCTEON_SOC default n select USB_EHCI_BIG_ENDIAN_MMIO + select USB_EHCI_HCD_PLATFORM help + This option is deprecated now and the driver was removed, use + USB_EHCI_HCD_PLATFORM instead. + Enable support for the Octeon II SOC's on-chip EHCI controller. It is needed for high-speed (480Mbit/sec) USB 2.0 device support. All CN6XXX based chips with USB are @@ -550,7 +554,7 @@ config USB_OHCI_SH config USB_OHCI_EXYNOS tristate "OHCI support for Samsung S5P/EXYNOS SoC Series" - depends on PLAT_S5P || ARCH_EXYNOS + depends on ARCH_S5PV210 || ARCH_EXYNOS help Enable support for the Samsung Exynos SOC's on-chip OHCI controller. @@ -575,12 +579,16 @@ config USB_OHCI_HCD_PLATFORM If unsure, say N. config USB_OCTEON_OHCI - bool "Octeon on-chip OHCI support" + bool "Octeon on-chip OHCI support (DEPRECATED)" depends on CAVIUM_OCTEON_SOC default USB_OCTEON_EHCI select USB_OHCI_BIG_ENDIAN_MMIO select USB_OHCI_LITTLE_ENDIAN + select USB_OHCI_HCD_PLATFORM help + This option is deprecated now and the driver was removed, use + USB_OHCI_HCD_PLATFORM instead. + Enable support for the Octeon II SOC's on-chip OHCI controller. It is needed for low-speed USB 1.0 device support. All CN6XXX based chips with USB are supported. @@ -754,12 +762,6 @@ config USB_IMX21_HCD To compile this driver as a module, choose M here: the module will be called "imx21-hcd". - - -config USB_OCTEON2_COMMON - bool - default y if USB_OCTEON_EHCI || USB_OCTEON_OHCI - config USB_HCD_BCMA tristate "BCMA usb host driver" depends on BCMA diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile index 348c243..d6216a4 100644 --- a/drivers/usb/host/Makefile +++ b/drivers/usb/host/Makefile @@ -73,7 +73,6 @@ obj-$(CONFIG_USB_ISP1760_HCD) += isp1760.o obj-$(CONFIG_USB_HWA_HCD) += hwa-hc.o obj-$(CONFIG_USB_IMX21_HCD) += imx21-hcd.o obj-$(CONFIG_USB_FSL_MPH_DR_OF) += fsl-mph-dr-of.o -obj-$(CONFIG_USB_OCTEON2_COMMON) += octeon2-common.o obj-$(CONFIG_USB_HCD_BCMA) += bcma-hcd.o obj-$(CONFIG_USB_HCD_SSB) += ssb-hcd.o obj-$(CONFIG_USB_FUSBH200_HCD) += fusbh200-hcd.o diff --git a/drivers/usb/host/ehci-atmel.c b/drivers/usb/host/ehci-atmel.c index ec9f7b7..56a8850 100644 --- a/drivers/usb/host/ehci-atmel.c +++ b/drivers/usb/host/ehci-atmel.c @@ -107,22 +107,15 @@ static int ehci_atmel_drv_probe(struct platform_device *pdev) } res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, - "Found HC with no register addr. Check %s setup!\n", - dev_name(&pdev->dev)); - retval = -ENODEV; - goto fail_request_resource; - } - hcd->rsrc_start = res->start; - hcd->rsrc_len = resource_size(res); - hcd->regs = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(hcd->regs)) { retval = PTR_ERR(hcd->regs); goto fail_request_resource; } + hcd->rsrc_start = res->start; + hcd->rsrc_len = resource_size(res); + iclk = devm_clk_get(&pdev->dev, "ehci_clk"); if (IS_ERR(iclk)) { dev_err(&pdev->dev, "Error getting interface clock\n"); diff --git a/drivers/usb/host/ehci-exynos.c b/drivers/usb/host/ehci-exynos.c index 7189f2e..f58c975 100644 --- a/drivers/usb/host/ehci-exynos.c +++ b/drivers/usb/host/ehci-exynos.c @@ -74,7 +74,6 @@ static int exynos_ehci_get_phy(struct device *dev, phy = devm_of_phy_get(dev, child, NULL); exynos_ehci->phy[phy_number] = phy; - of_node_put(child); if (IS_ERR(phy)) { ret = PTR_ERR(phy); if (ret == -EPROBE_DEFER) { @@ -188,20 +187,15 @@ skip_phy: goto fail_clk; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, "Failed to get I/O memory\n"); - err = -ENXIO; - goto fail_io; - } - - hcd->rsrc_start = res->start; - hcd->rsrc_len = resource_size(res); hcd->regs = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(hcd->regs)) { err = PTR_ERR(hcd->regs); goto fail_io; } + hcd->rsrc_start = res->start; + hcd->rsrc_len = resource_size(res); + irq = platform_get_irq(pdev, 0); if (!irq) { dev_err(&pdev->dev, "Failed to get IRQ\n"); diff --git a/drivers/usb/host/ehci-fsl.c b/drivers/usb/host/ehci-fsl.c index 2d2ae8d..fb7bd0c 100644 --- a/drivers/usb/host/ehci-fsl.c +++ b/drivers/usb/host/ehci-fsl.c @@ -93,21 +93,15 @@ static int usb_hcd_fsl_probe(const struct hc_driver *driver, } res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, - "Found HC with no register addr. Check %s setup!\n", - dev_name(&pdev->dev)); - retval = -ENODEV; - goto err2; - } - hcd->rsrc_start = res->start; - hcd->rsrc_len = resource_size(res); hcd->regs = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(hcd->regs)) { retval = PTR_ERR(hcd->regs); goto err2; } + hcd->rsrc_start = res->start; + hcd->rsrc_len = resource_size(res); + pdata->regs = hcd->regs; if (pdata->power_budget) diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 15feaf9..38bfeed 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -311,6 +311,7 @@ static void unlink_empty_async_suspended(struct ehci_hcd *ehci); static void ehci_work(struct ehci_hcd *ehci); static void start_unlink_intr(struct ehci_hcd *ehci, struct ehci_qh *qh); static void end_unlink_intr(struct ehci_hcd *ehci, struct ehci_qh *qh); +static int ehci_port_power(struct ehci_hcd *ehci, int portnum, bool enable); #include "ehci-timer.c" #include "ehci-hub.c" @@ -329,9 +330,13 @@ static void ehci_turn_off_all_ports(struct ehci_hcd *ehci) { int port = HCS_N_PORTS(ehci->hcs_params); - while (port--) + while (port--) { ehci_writel(ehci, PORT_RWC_BITS, &ehci->regs->port_status[port]); + spin_unlock_irq(&ehci->lock); + ehci_port_power(ehci, port, false); + spin_lock_irq(&ehci->lock); + } } /* @@ -1233,6 +1238,8 @@ void ehci_init_driver(struct hc_driver *drv, drv->hcd_priv_size += over->extra_priv_size; if (over->reset) drv->reset = over->reset; + if (over->port_power) + drv->port_power = over->port_power; } } EXPORT_SYMBOL_GPL(ehci_init_driver); @@ -1268,11 +1275,6 @@ MODULE_LICENSE ("GPL"); #define XILINX_OF_PLATFORM_DRIVER ehci_hcd_xilinx_of_driver #endif -#ifdef CONFIG_USB_OCTEON_EHCI -#include "ehci-octeon.c" -#define PLATFORM_DRIVER ehci_octeon_driver -#endif - #ifdef CONFIG_TILE_USB #include "ehci-tilegx.c" #define PLATFORM_DRIVER ehci_hcd_tilegx_driver diff --git a/drivers/usb/host/ehci-hub.c b/drivers/usb/host/ehci-hub.c index 5728829..118edb7 100644 --- a/drivers/usb/host/ehci-hub.c +++ b/drivers/usb/host/ehci-hub.c @@ -69,10 +69,8 @@ static void ehci_handover_companion_ports(struct ehci_hcd *ehci) if (test_bit(port, &ehci->owned_ports)) { reg = &ehci->regs->port_status[port]; status = ehci_readl(ehci, reg) & ~PORT_RWC_BITS; - if (!(status & PORT_POWER)) { - status |= PORT_POWER; - ehci_writel(ehci, status, reg); - } + if (!(status & PORT_POWER)) + ehci_port_power(ehci, port, true); } } @@ -952,9 +950,11 @@ int ehci_hub_control( clear_bit(wIndex, &ehci->port_c_suspend); break; case USB_PORT_FEAT_POWER: - if (HCS_PPC (ehci->hcs_params)) - ehci_writel(ehci, temp & ~PORT_POWER, - status_reg); + if (HCS_PPC(ehci->hcs_params)) { + spin_unlock_irqrestore(&ehci->lock, flags); + ehci_port_power(ehci, wIndex, false); + spin_lock_irqsave(&ehci->lock, flags); + } break; case USB_PORT_FEAT_C_CONNECTION: ehci_writel(ehci, temp | PORT_CSC, status_reg); @@ -1004,9 +1004,9 @@ int ehci_hub_control( */ if (((temp & PORT_OC) || (ehci->need_oc_pp_cycle)) && HCS_PPC(ehci->hcs_params)) { - ehci_writel(ehci, - temp & ~(PORT_RWC_BITS | PORT_POWER), - status_reg); + spin_unlock_irqrestore(&ehci->lock, flags); + ehci_port_power(ehci, wIndex, false); + spin_lock_irqsave(&ehci->lock, flags); temp = ehci_readl(ehci, status_reg); } } @@ -1187,9 +1187,11 @@ int ehci_hub_control( set_bit(wIndex, &ehci->suspended_ports); break; case USB_PORT_FEAT_POWER: - if (HCS_PPC (ehci->hcs_params)) - ehci_writel(ehci, temp | PORT_POWER, - status_reg); + if (HCS_PPC(ehci->hcs_params)) { + spin_unlock_irqrestore(&ehci->lock, flags); + ehci_port_power(ehci, wIndex, true); + spin_lock_irqsave(&ehci->lock, flags); + } break; case USB_PORT_FEAT_RESET: if (temp & (PORT_SUSPEND|PORT_RESUME)) @@ -1297,3 +1299,20 @@ static int ehci_port_handed_over(struct usb_hcd *hcd, int portnum) reg = &ehci->regs->port_status[portnum - 1]; return ehci_readl(ehci, reg) & PORT_OWNER; } + +static int ehci_port_power(struct ehci_hcd *ehci, int portnum, bool enable) +{ + struct usb_hcd *hcd = ehci_to_hcd(ehci); + u32 __iomem *status_reg = &ehci->regs->port_status[portnum]; + u32 temp = ehci_readl(ehci, status_reg) & ~PORT_RWC_BITS; + + if (enable) + ehci_writel(ehci, temp | PORT_POWER, status_reg); + else + ehci_writel(ehci, temp & ~PORT_POWER, status_reg); + + if (hcd->driver->port_power) + hcd->driver->port_power(hcd, portnum, enable); + + return 0; +} diff --git a/drivers/usb/host/ehci-msm.c b/drivers/usb/host/ehci-msm.c index 9dc2118..9db74ca 100644 --- a/drivers/usb/host/ehci-msm.c +++ b/drivers/usb/host/ehci-msm.c @@ -88,19 +88,13 @@ static int ehci_msm_probe(struct platform_device *pdev) } res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, "Unable to get memory resource\n"); - ret = -ENODEV; - goto put_hcd; - } - - hcd->rsrc_start = res->start; - hcd->rsrc_len = resource_size(res); hcd->regs = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(hcd->regs)) { ret = PTR_ERR(hcd->regs); goto put_hcd; } + hcd->rsrc_start = res->start; + hcd->rsrc_len = resource_size(res); /* * OTG driver takes care of PHY initialization, clock management, diff --git a/drivers/usb/host/ehci-mv.c b/drivers/usb/host/ehci-mv.c index 08147c3..849806a 100644 --- a/drivers/usb/host/ehci-mv.c +++ b/drivers/usb/host/ehci-mv.c @@ -153,7 +153,6 @@ static int mv_ehci_probe(struct platform_device *pdev) ehci_mv = devm_kzalloc(&pdev->dev, sizeof(*ehci_mv), GFP_KERNEL); if (ehci_mv == NULL) { - dev_err(&pdev->dev, "cannot allocate ehci_hcd_mv\n"); retval = -ENOMEM; goto err_put_hcd; } @@ -170,12 +169,6 @@ static int mv_ehci_probe(struct platform_device *pdev) } r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "phyregs"); - if (r == NULL) { - dev_err(&pdev->dev, "no phy I/O memory resource defined\n"); - retval = -ENODEV; - goto err_put_hcd; - } - ehci_mv->phy_regs = devm_ioremap_resource(&pdev->dev, r); if (IS_ERR(ehci_mv->phy_regs)) { retval = PTR_ERR(ehci_mv->phy_regs); @@ -183,12 +176,6 @@ static int mv_ehci_probe(struct platform_device *pdev) } r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "capregs"); - if (!r) { - dev_err(&pdev->dev, "no I/O memory resource defined\n"); - retval = -ENODEV; - goto err_put_hcd; - } - ehci_mv->cap_regs = devm_ioremap_resource(&pdev->dev, r); if (IS_ERR(ehci_mv->cap_regs)) { retval = PTR_ERR(ehci_mv->cap_regs); diff --git a/drivers/usb/host/ehci-mxc.c b/drivers/usb/host/ehci-mxc.c index dbe5e4e..c7a9b31 100644 --- a/drivers/usb/host/ehci-mxc.c +++ b/drivers/usb/host/ehci-mxc.c @@ -69,20 +69,13 @@ static int ehci_mxc_drv_probe(struct platform_device *pdev) return -ENOMEM; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(dev, "Found HC with no register addr. Check setup!\n"); - ret = -ENODEV; - goto err_alloc; - } - - hcd->rsrc_start = res->start; - hcd->rsrc_len = resource_size(res); - hcd->regs = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(hcd->regs)) { ret = PTR_ERR(hcd->regs); goto err_alloc; } + hcd->rsrc_start = res->start; + hcd->rsrc_len = resource_size(res); hcd->has_tt = 1; ehci = hcd_to_ehci(hcd); diff --git a/drivers/usb/host/ehci-octeon.c b/drivers/usb/host/ehci-octeon.c deleted file mode 100644 index 9051439..0000000 --- a/drivers/usb/host/ehci-octeon.c +++ /dev/null @@ -1,188 +0,0 @@ -/* - * EHCI HCD glue for Cavium Octeon II SOCs. - * - * Loosely based on ehci-au1xxx.c - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2010 Cavium Networks - * - */ - -#include <linux/platform_device.h> - -#include <asm/octeon/octeon.h> -#include <asm/octeon/cvmx-uctlx-defs.h> - -#define OCTEON_EHCI_HCD_NAME "octeon-ehci" - -/* Common clock init code. */ -void octeon2_usb_clocks_start(void); -void octeon2_usb_clocks_stop(void); - -static void ehci_octeon_start(void) -{ - union cvmx_uctlx_ehci_ctl ehci_ctl; - - octeon2_usb_clocks_start(); - - ehci_ctl.u64 = cvmx_read_csr(CVMX_UCTLX_EHCI_CTL(0)); - /* Use 64-bit addressing. */ - ehci_ctl.s.ehci_64b_addr_en = 1; - ehci_ctl.s.l2c_addr_msb = 0; - ehci_ctl.s.l2c_buff_emod = 1; /* Byte swapped. */ - ehci_ctl.s.l2c_desc_emod = 1; /* Byte swapped. */ - cvmx_write_csr(CVMX_UCTLX_EHCI_CTL(0), ehci_ctl.u64); -} - -static void ehci_octeon_stop(void) -{ - octeon2_usb_clocks_stop(); -} - -static const struct hc_driver ehci_octeon_hc_driver = { - .description = hcd_name, - .product_desc = "Octeon EHCI", - .hcd_priv_size = sizeof(struct ehci_hcd), - - /* - * generic hardware linkage - */ - .irq = ehci_irq, - .flags = HCD_MEMORY | HCD_USB2 | HCD_BH, - - /* - * basic lifecycle operations - */ - .reset = ehci_setup, - .start = ehci_run, - .stop = ehci_stop, - .shutdown = ehci_shutdown, - - /* - * managing i/o requests and associated device resources - */ - .urb_enqueue = ehci_urb_enqueue, - .urb_dequeue = ehci_urb_dequeue, - .endpoint_disable = ehci_endpoint_disable, - .endpoint_reset = ehci_endpoint_reset, - - /* - * scheduling support - */ - .get_frame_number = ehci_get_frame, - - /* - * root hub support - */ - .hub_status_data = ehci_hub_status_data, - .hub_control = ehci_hub_control, - .bus_suspend = ehci_bus_suspend, - .bus_resume = ehci_bus_resume, - .relinquish_port = ehci_relinquish_port, - .port_handed_over = ehci_port_handed_over, - - .clear_tt_buffer_complete = ehci_clear_tt_buffer_complete, -}; - -static u64 ehci_octeon_dma_mask = DMA_BIT_MASK(64); - -static int ehci_octeon_drv_probe(struct platform_device *pdev) -{ - struct usb_hcd *hcd; - struct ehci_hcd *ehci; - struct resource *res_mem; - int irq; - int ret; - - if (usb_disabled()) - return -ENODEV; - - irq = platform_get_irq(pdev, 0); - if (irq < 0) { - dev_err(&pdev->dev, "No irq assigned\n"); - return -ENODEV; - } - - res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (res_mem == NULL) { - dev_err(&pdev->dev, "No register space assigned\n"); - return -ENODEV; - } - - /* - * We can DMA from anywhere. But the descriptors must be in - * the lower 4GB. - */ - pdev->dev.dma_mask = &ehci_octeon_dma_mask; - ret = dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); - if (ret) - return ret; - - hcd = usb_create_hcd(&ehci_octeon_hc_driver, &pdev->dev, "octeon"); - if (!hcd) - return -ENOMEM; - - hcd->rsrc_start = res_mem->start; - hcd->rsrc_len = resource_size(res_mem); - - hcd->regs = devm_ioremap_resource(&pdev->dev, res_mem); - if (IS_ERR(hcd->regs)) { - ret = PTR_ERR(hcd->regs); - goto err1; - } - - ehci_octeon_start(); - - ehci = hcd_to_ehci(hcd); - - /* Octeon EHCI matches CPU endianness. */ -#ifdef __BIG_ENDIAN - ehci->big_endian_mmio = 1; -#endif - - ehci->caps = hcd->regs; - - ret = usb_add_hcd(hcd, irq, IRQF_SHARED); - if (ret) { - dev_dbg(&pdev->dev, "failed to add hcd with err %d\n", ret); - goto err2; - } - device_wakeup_enable(hcd->self.controller); - - platform_set_drvdata(pdev, hcd); - - return 0; -err2: - ehci_octeon_stop(); - -err1: - usb_put_hcd(hcd); - return ret; -} - -static int ehci_octeon_drv_remove(struct platform_device *pdev) -{ - struct usb_hcd *hcd = platform_get_drvdata(pdev); - - usb_remove_hcd(hcd); - - ehci_octeon_stop(); - usb_put_hcd(hcd); - - return 0; -} - -static struct platform_driver ehci_octeon_driver = { - .probe = ehci_octeon_drv_probe, - .remove = ehci_octeon_drv_remove, - .shutdown = usb_hcd_platform_shutdown, - .driver = { - .name = OCTEON_EHCI_HCD_NAME, - .owner = THIS_MODULE, - } -}; - -MODULE_ALIAS("platform:" OCTEON_EHCI_HCD_NAME); diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c index 22e15ca..3c76489 100644 --- a/drivers/usb/host/ehci-orion.c +++ b/drivers/usb/host/ehci-orion.c @@ -25,8 +25,8 @@ #include "ehci.h" -#define rdl(off) __raw_readl(hcd->regs + (off)) -#define wrl(off, val) __raw_writel((val), hcd->regs + (off)) +#define rdl(off) readl_relaxed(hcd->regs + (off)) +#define wrl(off, val) writel_relaxed((val), hcd->regs + (off)) #define USB_CMD 0x140 #define USB_MODE 0x1a8 @@ -175,15 +175,6 @@ static int ehci_orion_drv_probe(struct platform_device *pdev) goto err; } - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, - "Found HC with no register addr. Check %s setup!\n", - dev_name(&pdev->dev)); - err = -ENODEV; - goto err; - } - /* * Right now device-tree probed devices don't get dma_mask * set. Since shared usb code relies on it, set it here for @@ -193,6 +184,7 @@ static int ehci_orion_drv_probe(struct platform_device *pdev) if (err) goto err; + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); regs = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(regs)) { err = PTR_ERR(regs); diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c index 2f5b9ce..35a9aed 100644 --- a/drivers/usb/host/ehci-platform.c +++ b/drivers/usb/host/ehci-platform.c @@ -164,11 +164,6 @@ static int ehci_platform_probe(struct platform_device *dev) dev_err(&dev->dev, "no irq provided"); return irq; } - res_mem = platform_get_resource(dev, IORESOURCE_MEM, 0); - if (!res_mem) { - dev_err(&dev->dev, "no memory resource provided"); - return -ENXIO; - } hcd = usb_create_hcd(&ehci_platform_hc_driver, &dev->dev, dev_name(&dev->dev)); @@ -250,14 +245,15 @@ static int ehci_platform_probe(struct platform_device *dev) goto err_reset; } - hcd->rsrc_start = res_mem->start; - hcd->rsrc_len = resource_size(res_mem); - + res_mem = platform_get_resource(dev, IORESOURCE_MEM, 0); hcd->regs = devm_ioremap_resource(&dev->dev, res_mem); if (IS_ERR(hcd->regs)) { err = PTR_ERR(hcd->regs); goto err_power; } + hcd->rsrc_start = res_mem->start; + hcd->rsrc_len = resource_size(res_mem); + err = usb_add_hcd(hcd, irq, IRQF_SHARED); if (err) goto err_power; @@ -311,8 +307,7 @@ static int ehci_platform_remove(struct platform_device *dev) return 0; } -#ifdef CONFIG_PM - +#ifdef CONFIG_PM_SLEEP static int ehci_platform_suspend(struct device *dev) { struct usb_hcd *hcd = dev_get_drvdata(dev); @@ -348,11 +343,7 @@ static int ehci_platform_resume(struct device *dev) ehci_resume(hcd, false); return 0; } - -#else /* !CONFIG_PM */ -#define ehci_platform_suspend NULL -#define ehci_platform_resume NULL -#endif /* CONFIG_PM */ +#endif /* CONFIG_PM_SLEEP */ static const struct of_device_id vt8500_ehci_ids[] = { { .compatible = "via,vt8500-ehci", }, @@ -368,10 +359,8 @@ static const struct platform_device_id ehci_platform_table[] = { }; MODULE_DEVICE_TABLE(platform, ehci_platform_table); -static const struct dev_pm_ops ehci_platform_pm_ops = { - .suspend = ehci_platform_suspend, - .resume = ehci_platform_resume, -}; +static SIMPLE_DEV_PM_OPS(ehci_platform_pm_ops, ehci_platform_suspend, + ehci_platform_resume); static struct platform_driver ehci_platform_driver = { .id_table = ehci_platform_table, diff --git a/drivers/usb/host/ehci-sead3.c b/drivers/usb/host/ehci-sead3.c index cf12676..9b6e8d0 100644 --- a/drivers/usb/host/ehci-sead3.c +++ b/drivers/usb/host/ehci-sead3.c @@ -110,14 +110,13 @@ static int ehci_hcd_sead3_drv_probe(struct platform_device *pdev) return -ENOMEM; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - hcd->rsrc_start = res->start; - hcd->rsrc_len = resource_size(res); - hcd->regs = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(hcd->regs)) { ret = PTR_ERR(hcd->regs); goto err1; } + hcd->rsrc_start = res->start; + hcd->rsrc_len = resource_size(res); /* Root hub has integrated TT. */ hcd->has_tt = 1; diff --git a/drivers/usb/host/ehci-sh.c b/drivers/usb/host/ehci-sh.c index 9b9b9f5..0e0ce68 100644 --- a/drivers/usb/host/ehci-sh.c +++ b/drivers/usb/host/ehci-sh.c @@ -86,15 +86,6 @@ static int ehci_hcd_sh_probe(struct platform_device *pdev) if (usb_disabled()) return -ENODEV; - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, - "Found HC with no register addr. Check %s setup!\n", - dev_name(&pdev->dev)); - ret = -ENODEV; - goto fail_create_hcd; - } - irq = platform_get_irq(pdev, 0); if (irq <= 0) { dev_err(&pdev->dev, @@ -114,19 +105,18 @@ static int ehci_hcd_sh_probe(struct platform_device *pdev) goto fail_create_hcd; } - hcd->rsrc_start = res->start; - hcd->rsrc_len = resource_size(res); - + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); hcd->regs = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(hcd->regs)) { ret = PTR_ERR(hcd->regs); goto fail_request_resource; } + hcd->rsrc_start = res->start; + hcd->rsrc_len = resource_size(res); priv = devm_kzalloc(&pdev->dev, sizeof(struct ehci_sh_priv), GFP_KERNEL); if (!priv) { - dev_dbg(&pdev->dev, "error allocating priv data\n"); ret = -ENOMEM; goto fail_request_resource; } diff --git a/drivers/usb/host/ehci-spear.c b/drivers/usb/host/ehci-spear.c index 1355ff0..34e1474 100644 --- a/drivers/usb/host/ehci-spear.c +++ b/drivers/usb/host/ehci-spear.c @@ -99,18 +99,13 @@ static int spear_ehci_hcd_drv_probe(struct platform_device *pdev) } res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - retval = -ENODEV; - goto err_put_hcd; - } - - hcd->rsrc_start = res->start; - hcd->rsrc_len = resource_size(res); hcd->regs = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(hcd->regs)) { retval = PTR_ERR(hcd->regs); goto err_put_hcd; } + hcd->rsrc_start = res->start; + hcd->rsrc_len = resource_size(res); sehci = to_spear_ehci(hcd); sehci->clk = usbh_clk; diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c index aaa0197..19a9af1 100644 --- a/drivers/usb/host/ehci-tegra.c +++ b/drivers/usb/host/ehci-tegra.c @@ -460,18 +460,14 @@ static int tegra_ehci_probe(struct platform_device *pdev) "nvidia,needs-double-reset"); res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, "Failed to get I/O memory\n"); - err = -ENXIO; - goto cleanup_clk_en; - } - hcd->rsrc_start = res->start; - hcd->rsrc_len = resource_size(res); hcd->regs = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(hcd->regs)) { err = PTR_ERR(hcd->regs); goto cleanup_clk_en; } + hcd->rsrc_start = res->start; + hcd->rsrc_len = resource_size(res); + ehci->caps = hcd->regs + 0x100; ehci->has_hostpc = soc_config->has_hostpc; @@ -484,7 +480,6 @@ static int tegra_ehci_probe(struct platform_device *pdev) u_phy->otg = devm_kzalloc(&pdev->dev, sizeof(struct usb_otg), GFP_KERNEL); if (!u_phy->otg) { - dev_err(&pdev->dev, "Failed to alloc memory for otg\n"); err = -ENOMEM; goto cleanup_phy; } diff --git a/drivers/usb/host/ehci-w90x900.c b/drivers/usb/host/ehci-w90x900.c index a9303af..c305732 100644 --- a/drivers/usb/host/ehci-w90x900.c +++ b/drivers/usb/host/ehci-w90x900.c @@ -42,27 +42,20 @@ static int usb_w90x900_probe(const struct hc_driver *driver, int retval = 0, irq; unsigned long val; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - retval = -ENXIO; - goto err1; - } - hcd = usb_create_hcd(driver, &pdev->dev, "w90x900 EHCI"); if (!hcd) { retval = -ENOMEM; goto err1; } - hcd->rsrc_start = res->start; - hcd->rsrc_len = resource_size(res); - + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); hcd->regs = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(hcd->regs)) { retval = PTR_ERR(hcd->regs); goto err2; } + hcd->rsrc_start = res->start; + hcd->rsrc_len = resource_size(res); ehci = hcd_to_ehci(hcd); ehci->caps = hcd->regs; @@ -82,8 +75,10 @@ static int usb_w90x900_probe(const struct hc_driver *driver, __raw_writel(val, ehci->regs+PHY1_CTR); irq = platform_get_irq(pdev, 0); - if (irq < 0) + if (irq < 0) { + retval = irq; goto err2; + } retval = usb_add_hcd(hcd, irq, IRQF_SHARED); if (retval != 0) diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h index eee228a..6f0577b 100644 --- a/drivers/usb/host/ehci.h +++ b/drivers/usb/host/ehci.h @@ -859,6 +859,8 @@ static inline u32 hc32_to_cpup (const struct ehci_hcd *ehci, const __hc32 *x) struct ehci_driver_overrides { size_t extra_priv_size; int (*reset)(struct usb_hcd *hcd); + int (*port_power)(struct usb_hcd *hcd, + int portnum, bool enable); }; extern void ehci_init_driver(struct hc_driver *drv, diff --git a/drivers/usb/host/fotg210.h b/drivers/usb/host/fotg210.h index ac6cd1b..3bad178 100644 --- a/drivers/usb/host/fotg210.h +++ b/drivers/usb/host/fotg210.h @@ -1,6 +1,8 @@ #ifndef __LINUX_FOTG210_H #define __LINUX_FOTG210_H +#include <linux/usb/ehci-dbgp.h> + /* definitions used for the EHCI driver */ /* @@ -84,7 +86,7 @@ struct fotg210_hcd { /* one per controller */ /* glue to PCI and HCD framework */ struct fotg210_caps __iomem *caps; struct fotg210_regs __iomem *regs; - struct fotg210_dbg_port __iomem *debug; + struct ehci_dbg_port __iomem *debug; __u32 hcs_params; /* cached register copy */ spinlock_t lock; @@ -293,64 +295,6 @@ struct fotg210_regs { #define GMIR_MDEV_INT (1 << 0) }; -/* Appendix C, Debug port ... intended for use with special "debug devices" - * that can help if there's no serial console. (nonstandard enumeration.) - */ -struct fotg210_dbg_port { - u32 control; -#define DBGP_OWNER (1<<30) -#define DBGP_ENABLED (1<<28) -#define DBGP_DONE (1<<16) -#define DBGP_INUSE (1<<10) -#define DBGP_ERRCODE(x) (((x)>>7)&0x07) -# define DBGP_ERR_BAD 1 -# define DBGP_ERR_SIGNAL 2 -#define DBGP_ERROR (1<<6) -#define DBGP_GO (1<<5) -#define DBGP_OUT (1<<4) -#define DBGP_LEN(x) (((x)>>0)&0x0f) - u32 pids; -#define DBGP_PID_GET(x) (((x)>>16)&0xff) -#define DBGP_PID_SET(data, tok) (((data)<<8)|(tok)) - u32 data03; - u32 data47; - u32 address; -#define DBGP_EPADDR(dev, ep) (((dev)<<8)|(ep)) -}; - -#ifdef CONFIG_EARLY_PRINTK_DBGP -#include <linux/init.h> -extern int __init early_dbgp_init(char *s); -extern struct console early_dbgp_console; -#endif /* CONFIG_EARLY_PRINTK_DBGP */ - -struct usb_hcd; - -static inline int xen_dbgp_reset_prep(struct usb_hcd *hcd) -{ - return 1; /* Shouldn't this be 0? */ -} - -static inline int xen_dbgp_external_startup(struct usb_hcd *hcd) -{ - return -1; -} - -#ifdef CONFIG_EARLY_PRINTK_DBGP -/* Call backs from fotg210 host driver to fotg210 debug driver */ -extern int dbgp_external_startup(struct usb_hcd *); -extern int dbgp_reset_prep(struct usb_hcd *hcd); -#else -static inline int dbgp_reset_prep(struct usb_hcd *hcd) -{ - return xen_dbgp_reset_prep(hcd); -} -static inline int dbgp_external_startup(struct usb_hcd *hcd) -{ - return xen_dbgp_external_startup(hcd); -} -#endif - /*-------------------------------------------------------------------------*/ #define QTD_NEXT(fotg210, dma) cpu_to_hc32(fotg210, (u32)dma) diff --git a/drivers/usb/host/fusbh200.h b/drivers/usb/host/fusbh200.h index 6b719e0..d6e5b3d 100644 --- a/drivers/usb/host/fusbh200.h +++ b/drivers/usb/host/fusbh200.h @@ -1,6 +1,8 @@ #ifndef __LINUX_FUSBH200_H #define __LINUX_FUSBH200_H +#include <linux/usb/ehci-dbgp.h> + /* definitions used for the EHCI driver */ /* @@ -84,7 +86,7 @@ struct fusbh200_hcd { /* one per controller */ /* glue to PCI and HCD framework */ struct fusbh200_caps __iomem *caps; struct fusbh200_regs __iomem *regs; - struct fusbh200_dbg_port __iomem *debug; + struct ehci_dbg_port __iomem *debug; __u32 hcs_params; /* cached register copy */ spinlock_t lock; @@ -285,64 +287,6 @@ struct fusbh200_regs { #define BMIER_VBUS_ERR_EN (1<<0) }; -/* Appendix C, Debug port ... intended for use with special "debug devices" - * that can help if there's no serial console. (nonstandard enumeration.) - */ -struct fusbh200_dbg_port { - u32 control; -#define DBGP_OWNER (1<<30) -#define DBGP_ENABLED (1<<28) -#define DBGP_DONE (1<<16) -#define DBGP_INUSE (1<<10) -#define DBGP_ERRCODE(x) (((x)>>7)&0x07) -# define DBGP_ERR_BAD 1 -# define DBGP_ERR_SIGNAL 2 -#define DBGP_ERROR (1<<6) -#define DBGP_GO (1<<5) -#define DBGP_OUT (1<<4) -#define DBGP_LEN(x) (((x)>>0)&0x0f) - u32 pids; -#define DBGP_PID_GET(x) (((x)>>16)&0xff) -#define DBGP_PID_SET(data, tok) (((data)<<8)|(tok)) - u32 data03; - u32 data47; - u32 address; -#define DBGP_EPADDR(dev, ep) (((dev)<<8)|(ep)) -}; - -#ifdef CONFIG_EARLY_PRINTK_DBGP -#include <linux/init.h> -extern int __init early_dbgp_init(char *s); -extern struct console early_dbgp_console; -#endif /* CONFIG_EARLY_PRINTK_DBGP */ - -struct usb_hcd; - -static inline int xen_dbgp_reset_prep(struct usb_hcd *hcd) -{ - return 1; /* Shouldn't this be 0? */ -} - -static inline int xen_dbgp_external_startup(struct usb_hcd *hcd) -{ - return -1; -} - -#ifdef CONFIG_EARLY_PRINTK_DBGP -/* Call backs from fusbh200 host driver to fusbh200 debug driver */ -extern int dbgp_external_startup(struct usb_hcd *); -extern int dbgp_reset_prep(struct usb_hcd *hcd); -#else -static inline int dbgp_reset_prep(struct usb_hcd *hcd) -{ - return xen_dbgp_reset_prep(hcd); -} -static inline int dbgp_external_startup(struct usb_hcd *hcd) -{ - return xen_dbgp_external_startup(hcd); -} -#endif - /*-------------------------------------------------------------------------*/ #define QTD_NEXT(fusbh200, dma) cpu_to_hc32(fusbh200, (u32)dma) diff --git a/drivers/usb/host/hwa-hc.c b/drivers/usb/host/hwa-hc.c index d0d8fad..1db0626 100644 --- a/drivers/usb/host/hwa-hc.c +++ b/drivers/usb/host/hwa-hc.c @@ -607,7 +607,7 @@ found: wa->wa_descr = wa_descr = (struct usb_wa_descriptor *) hdr; if (le16_to_cpu(wa_descr->bcdWAVersion) > 0x0100) dev_warn(dev, "Wire Adapter v%d.%d newer than groked v1.0\n", - le16_to_cpu(wa_descr->bcdWAVersion) & 0xff00 >> 8, + (le16_to_cpu(wa_descr->bcdWAVersion) & 0xff00) >> 8, le16_to_cpu(wa_descr->bcdWAVersion) & 0x00ff); result = 0; error: diff --git a/drivers/usb/host/imx21-hcd.c b/drivers/usb/host/imx21-hcd.c index 207bad9..eb4efba 100644 --- a/drivers/usb/host/imx21-hcd.c +++ b/drivers/usb/host/imx21-hcd.c @@ -1174,11 +1174,11 @@ static int imx21_hc_urb_enqueue(struct usb_hcd *hcd, dev_vdbg(imx21->dev, "enqueue urb=%p ep=%p len=%d " - "buffer=%p dma=%08X setupBuf=%p setupDma=%08X\n", + "buffer=%p dma=%pad setupBuf=%p setupDma=%pad\n", urb, ep, urb->transfer_buffer_length, - urb->transfer_buffer, urb->transfer_dma, - urb->setup_packet, urb->setup_dma); + urb->transfer_buffer, &urb->transfer_dma, + urb->setup_packet, &urb->setup_dma); if (usb_pipeisoc(urb->pipe)) return imx21_hc_urb_enqueue_isoc(hcd, ep, urb, mem_flags); diff --git a/drivers/usb/host/octeon2-common.c b/drivers/usb/host/octeon2-common.c deleted file mode 100644 index d9df423..0000000 --- a/drivers/usb/host/octeon2-common.c +++ /dev/null @@ -1,200 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2010, 2011 Cavium Networks - */ - -#include <linux/module.h> -#include <linux/mutex.h> -#include <linux/delay.h> - -#include <asm/octeon/octeon.h> -#include <asm/octeon/cvmx-uctlx-defs.h> - -static DEFINE_MUTEX(octeon2_usb_clocks_mutex); - -static int octeon2_usb_clock_start_cnt; - -void octeon2_usb_clocks_start(void) -{ - u64 div; - union cvmx_uctlx_if_ena if_ena; - union cvmx_uctlx_clk_rst_ctl clk_rst_ctl; - union cvmx_uctlx_uphy_ctl_status uphy_ctl_status; - union cvmx_uctlx_uphy_portx_ctl_status port_ctl_status; - int i; - unsigned long io_clk_64_to_ns; - - - mutex_lock(&octeon2_usb_clocks_mutex); - - octeon2_usb_clock_start_cnt++; - if (octeon2_usb_clock_start_cnt != 1) - goto exit; - - io_clk_64_to_ns = 64000000000ull / octeon_get_io_clock_rate(); - - /* - * Step 1: Wait for voltages stable. That surely happened - * before starting the kernel. - * - * Step 2: Enable SCLK of UCTL by writing UCTL0_IF_ENA[EN] = 1 - */ - if_ena.u64 = 0; - if_ena.s.en = 1; - cvmx_write_csr(CVMX_UCTLX_IF_ENA(0), if_ena.u64); - - /* Step 3: Configure the reference clock, PHY, and HCLK */ - clk_rst_ctl.u64 = cvmx_read_csr(CVMX_UCTLX_CLK_RST_CTL(0)); - - /* - * If the UCTL looks like it has already been started, skip - * the initialization, otherwise bus errors are obtained. - */ - if (clk_rst_ctl.s.hrst) - goto end_clock; - /* 3a */ - clk_rst_ctl.s.p_por = 1; - clk_rst_ctl.s.hrst = 0; - clk_rst_ctl.s.p_prst = 0; - clk_rst_ctl.s.h_clkdiv_rst = 0; - clk_rst_ctl.s.o_clkdiv_rst = 0; - clk_rst_ctl.s.h_clkdiv_en = 0; - clk_rst_ctl.s.o_clkdiv_en = 0; - cvmx_write_csr(CVMX_UCTLX_CLK_RST_CTL(0), clk_rst_ctl.u64); - - /* 3b */ - /* 12MHz crystal. */ - clk_rst_ctl.s.p_refclk_sel = 0; - clk_rst_ctl.s.p_refclk_div = 0; - cvmx_write_csr(CVMX_UCTLX_CLK_RST_CTL(0), clk_rst_ctl.u64); - - /* 3c */ - div = octeon_get_io_clock_rate() / 130000000ull; - - switch (div) { - case 0: - div = 1; - break; - case 1: - case 2: - case 3: - case 4: - break; - case 5: - div = 4; - break; - case 6: - case 7: - div = 6; - break; - case 8: - case 9: - case 10: - case 11: - div = 8; - break; - default: - div = 12; - break; - } - clk_rst_ctl.s.h_div = div; - cvmx_write_csr(CVMX_UCTLX_CLK_RST_CTL(0), clk_rst_ctl.u64); - /* Read it back, */ - clk_rst_ctl.u64 = cvmx_read_csr(CVMX_UCTLX_CLK_RST_CTL(0)); - clk_rst_ctl.s.h_clkdiv_en = 1; - cvmx_write_csr(CVMX_UCTLX_CLK_RST_CTL(0), clk_rst_ctl.u64); - /* 3d */ - clk_rst_ctl.s.h_clkdiv_rst = 1; - cvmx_write_csr(CVMX_UCTLX_CLK_RST_CTL(0), clk_rst_ctl.u64); - - /* 3e: delay 64 io clocks */ - ndelay(io_clk_64_to_ns); - - /* - * Step 4: Program the power-on reset field in the UCTL - * clock-reset-control register. - */ - clk_rst_ctl.s.p_por = 0; - cvmx_write_csr(CVMX_UCTLX_CLK_RST_CTL(0), clk_rst_ctl.u64); - - /* Step 5: Wait 1 ms for the PHY clock to start. */ - mdelay(1); - - /* - * Step 6: Program the reset input from automatic test - * equipment field in the UPHY CSR - */ - uphy_ctl_status.u64 = cvmx_read_csr(CVMX_UCTLX_UPHY_CTL_STATUS(0)); - uphy_ctl_status.s.ate_reset = 1; - cvmx_write_csr(CVMX_UCTLX_UPHY_CTL_STATUS(0), uphy_ctl_status.u64); - - /* Step 7: Wait for at least 10ns. */ - ndelay(10); - - /* Step 8: Clear the ATE_RESET field in the UPHY CSR. */ - uphy_ctl_status.s.ate_reset = 0; - cvmx_write_csr(CVMX_UCTLX_UPHY_CTL_STATUS(0), uphy_ctl_status.u64); - - /* - * Step 9: Wait for at least 20ns for UPHY to output PHY clock - * signals and OHCI_CLK48 - */ - ndelay(20); - - /* Step 10: Configure the OHCI_CLK48 and OHCI_CLK12 clocks. */ - /* 10a */ - clk_rst_ctl.s.o_clkdiv_rst = 1; - cvmx_write_csr(CVMX_UCTLX_CLK_RST_CTL(0), clk_rst_ctl.u64); - - /* 10b */ - clk_rst_ctl.s.o_clkdiv_en = 1; - cvmx_write_csr(CVMX_UCTLX_CLK_RST_CTL(0), clk_rst_ctl.u64); - - /* 10c */ - ndelay(io_clk_64_to_ns); - - /* - * Step 11: Program the PHY reset field: - * UCTL0_CLK_RST_CTL[P_PRST] = 1 - */ - clk_rst_ctl.s.p_prst = 1; - cvmx_write_csr(CVMX_UCTLX_CLK_RST_CTL(0), clk_rst_ctl.u64); - - /* Step 12: Wait 1 uS. */ - udelay(1); - - /* Step 13: Program the HRESET_N field: UCTL0_CLK_RST_CTL[HRST] = 1 */ - clk_rst_ctl.s.hrst = 1; - cvmx_write_csr(CVMX_UCTLX_CLK_RST_CTL(0), clk_rst_ctl.u64); - -end_clock: - /* Now we can set some other registers. */ - - for (i = 0; i <= 1; i++) { - port_ctl_status.u64 = - cvmx_read_csr(CVMX_UCTLX_UPHY_PORTX_CTL_STATUS(i, 0)); - /* Set txvreftune to 15 to obtain compliant 'eye' diagram. */ - port_ctl_status.s.txvreftune = 15; - port_ctl_status.s.txrisetune = 1; - port_ctl_status.s.txpreemphasistune = 1; - cvmx_write_csr(CVMX_UCTLX_UPHY_PORTX_CTL_STATUS(i, 0), - port_ctl_status.u64); - } - - /* Set uSOF cycle period to 60,000 bits. */ - cvmx_write_csr(CVMX_UCTLX_EHCI_FLA(0), 0x20ull); -exit: - mutex_unlock(&octeon2_usb_clocks_mutex); -} -EXPORT_SYMBOL(octeon2_usb_clocks_start); - -void octeon2_usb_clocks_stop(void) -{ - mutex_lock(&octeon2_usb_clocks_mutex); - octeon2_usb_clock_start_cnt--; - mutex_unlock(&octeon2_usb_clocks_mutex); -} -EXPORT_SYMBOL(octeon2_usb_clocks_stop); diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c index e49eb4f..3940660 100644 --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -24,12 +24,8 @@ #include <linux/usb.h> #include <linux/usb/hcd.h> -#include <mach/hardware.h> #include <asm/gpio.h> -#include <mach/cpu.h> - - #include "ohci.h" #define valid_port(index) ((index) >= 0 && (index) < AT91_MAX_USBH_PORTS) @@ -137,12 +133,6 @@ static int usb_hcd_at91_probe(const struct hc_driver *driver, struct resource *res; int irq; - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_dbg(dev, "hcd probe: missing memory resource\n"); - return -ENXIO; - } - irq = platform_get_irq(pdev, 0); if (irq < 0) { dev_dbg(dev, "hcd probe: missing irq resource\n"); @@ -152,14 +142,15 @@ static int usb_hcd_at91_probe(const struct hc_driver *driver, hcd = usb_create_hcd(driver, dev, "at91"); if (!hcd) return -ENOMEM; - hcd->rsrc_start = res->start; - hcd->rsrc_len = resource_size(res); + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); hcd->regs = devm_ioremap_resource(dev, res); if (IS_ERR(hcd->regs)) { retval = PTR_ERR(hcd->regs); goto err; } + hcd->rsrc_start = res->start; + hcd->rsrc_len = resource_size(res); iclk = devm_clk_get(dev, "ohci_clk"); if (IS_ERR(iclk)) { diff --git a/drivers/usb/host/ohci-da8xx.c b/drivers/usb/host/ohci-da8xx.c index df06be6..1c76999 100644 --- a/drivers/usb/host/ohci-da8xx.c +++ b/drivers/usb/host/ohci-da8xx.c @@ -313,16 +313,13 @@ static int usb_hcd_da8xx_probe(const struct hc_driver *driver, return -ENOMEM; mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!mem) - return -ENODEV; - hcd->rsrc_start = mem->start; - hcd->rsrc_len = resource_size(mem); - hcd->regs = devm_ioremap_resource(&pdev->dev, mem); if (IS_ERR(hcd->regs)) { error = PTR_ERR(hcd->regs); goto err; } + hcd->rsrc_start = mem->start; + hcd->rsrc_len = resource_size(mem); ohci_hcd_init(hcd_to_ohci(hcd)); diff --git a/drivers/usb/host/ohci-exynos.c b/drivers/usb/host/ohci-exynos.c index d28b658..035a8a8 100644 --- a/drivers/usb/host/ohci-exynos.c +++ b/drivers/usb/host/ohci-exynos.c @@ -63,7 +63,6 @@ static int exynos_ohci_get_phy(struct device *dev, phy = devm_of_phy_get(dev, child, NULL); exynos_ohci->phy[phy_number] = phy; - of_node_put(child); if (IS_ERR(phy)) { ret = PTR_ERR(phy); if (ret == -EPROBE_DEFER) { @@ -156,19 +155,13 @@ skip_phy: goto fail_clk; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(&pdev->dev, "Failed to get I/O memory\n"); - err = -ENXIO; - goto fail_io; - } - - hcd->rsrc_start = res->start; - hcd->rsrc_len = resource_size(res); hcd->regs = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(hcd->regs)) { err = PTR_ERR(hcd->regs); goto fail_io; } + hcd->rsrc_start = res->start; + hcd->rsrc_len = resource_size(res); irq = platform_get_irq(pdev, 0); if (!irq) { diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index d664eda..1dab9df 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -1249,11 +1249,6 @@ MODULE_LICENSE ("GPL"); #define PLATFORM_DRIVER ohci_hcd_jz4740_driver #endif -#ifdef CONFIG_USB_OCTEON_OHCI -#include "ohci-octeon.c" -#define PLATFORM_DRIVER ohci_octeon_driver -#endif - #ifdef CONFIG_TILE_USB #include "ohci-tilegx.c" #define PLATFORM_DRIVER ohci_hcd_tilegx_driver diff --git a/drivers/usb/host/ohci-jz4740.c b/drivers/usb/host/ohci-jz4740.c index c2c221a..8ddd8f5 100644 --- a/drivers/usb/host/ohci-jz4740.c +++ b/drivers/usb/host/ohci-jz4740.c @@ -153,13 +153,6 @@ static int jz4740_ohci_probe(struct platform_device *pdev) struct resource *res; int irq; - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - - if (!res) { - dev_err(&pdev->dev, "Failed to get platform resource\n"); - return -ENOENT; - } - irq = platform_get_irq(pdev, 0); if (irq < 0) { dev_err(&pdev->dev, "Failed to get platform irq\n"); @@ -174,14 +167,14 @@ static int jz4740_ohci_probe(struct platform_device *pdev) jz4740_ohci = hcd_to_jz4740_hcd(hcd); - hcd->rsrc_start = res->start; - hcd->rsrc_len = resource_size(res); - + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); hcd->regs = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(hcd->regs)) { ret = PTR_ERR(hcd->regs); goto err_free; } + hcd->rsrc_start = res->start; + hcd->rsrc_len = resource_size(res); jz4740_ohci->clk = devm_clk_get(&pdev->dev, "uhc"); if (IS_ERR(jz4740_ohci->clk)) { diff --git a/drivers/usb/host/ohci-octeon.c b/drivers/usb/host/ohci-octeon.c deleted file mode 100644 index 15af895..0000000 --- a/drivers/usb/host/ohci-octeon.c +++ /dev/null @@ -1,202 +0,0 @@ -/* - * EHCI HCD glue for Cavium Octeon II SOCs. - * - * Loosely based on ehci-au1xxx.c - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2010 Cavium Networks - * - */ - -#include <linux/platform_device.h> - -#include <asm/octeon/octeon.h> -#include <asm/octeon/cvmx-uctlx-defs.h> - -#define OCTEON_OHCI_HCD_NAME "octeon-ohci" - -/* Common clock init code. */ -void octeon2_usb_clocks_start(void); -void octeon2_usb_clocks_stop(void); - -static void ohci_octeon_hw_start(void) -{ - union cvmx_uctlx_ohci_ctl ohci_ctl; - - octeon2_usb_clocks_start(); - - ohci_ctl.u64 = cvmx_read_csr(CVMX_UCTLX_OHCI_CTL(0)); - ohci_ctl.s.l2c_addr_msb = 0; - ohci_ctl.s.l2c_buff_emod = 1; /* Byte swapped. */ - ohci_ctl.s.l2c_desc_emod = 1; /* Byte swapped. */ - cvmx_write_csr(CVMX_UCTLX_OHCI_CTL(0), ohci_ctl.u64); - -} - -static void ohci_octeon_hw_stop(void) -{ - /* Undo ohci_octeon_start() */ - octeon2_usb_clocks_stop(); -} - -static int ohci_octeon_start(struct usb_hcd *hcd) -{ - struct ohci_hcd *ohci = hcd_to_ohci(hcd); - int ret; - - ret = ohci_init(ohci); - - if (ret < 0) - return ret; - - ret = ohci_run(ohci); - - if (ret < 0) { - ohci_err(ohci, "can't start %s", hcd->self.bus_name); - ohci_stop(hcd); - return ret; - } - - return 0; -} - -static const struct hc_driver ohci_octeon_hc_driver = { - .description = hcd_name, - .product_desc = "Octeon OHCI", - .hcd_priv_size = sizeof(struct ohci_hcd), - - /* - * generic hardware linkage - */ - .irq = ohci_irq, - .flags = HCD_USB11 | HCD_MEMORY, - - /* - * basic lifecycle operations - */ - .start = ohci_octeon_start, - .stop = ohci_stop, - .shutdown = ohci_shutdown, - - /* - * managing i/o requests and associated device resources - */ - .urb_enqueue = ohci_urb_enqueue, - .urb_dequeue = ohci_urb_dequeue, - .endpoint_disable = ohci_endpoint_disable, - - /* - * scheduling support - */ - .get_frame_number = ohci_get_frame, - - /* - * root hub support - */ - .hub_status_data = ohci_hub_status_data, - .hub_control = ohci_hub_control, - - .start_port_reset = ohci_start_port_reset, -}; - -static int ohci_octeon_drv_probe(struct platform_device *pdev) -{ - struct usb_hcd *hcd; - struct ohci_hcd *ohci; - void *reg_base; - struct resource *res_mem; - int irq; - int ret; - - if (usb_disabled()) - return -ENODEV; - - irq = platform_get_irq(pdev, 0); - if (irq < 0) { - dev_err(&pdev->dev, "No irq assigned\n"); - return -ENODEV; - } - - res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (res_mem == NULL) { - dev_err(&pdev->dev, "No register space assigned\n"); - return -ENODEV; - } - - /* Ohci is a 32-bit device. */ - ret = dma_coerce_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32)); - if (ret) - return ret; - - hcd = usb_create_hcd(&ohci_octeon_hc_driver, &pdev->dev, "octeon"); - if (!hcd) - return -ENOMEM; - - hcd->rsrc_start = res_mem->start; - hcd->rsrc_len = resource_size(res_mem); - - reg_base = devm_ioremap_resource(&pdev->dev, res_mem); - if (IS_ERR(reg_base)) { - ret = PTR_ERR(reg_base); - goto err1; - } - - ohci_octeon_hw_start(); - - hcd->regs = reg_base; - - ohci = hcd_to_ohci(hcd); - - /* Octeon OHCI matches CPU endianness. */ -#ifdef __BIG_ENDIAN - ohci->flags |= OHCI_QUIRK_BE_MMIO; -#endif - - ohci_hcd_init(ohci); - - ret = usb_add_hcd(hcd, irq, IRQF_SHARED); - if (ret) { - dev_dbg(&pdev->dev, "failed to add hcd with err %d\n", ret); - goto err2; - } - - device_wakeup_enable(hcd->self.controller); - - platform_set_drvdata(pdev, hcd); - - return 0; - -err2: - ohci_octeon_hw_stop(); - -err1: - usb_put_hcd(hcd); - return ret; -} - -static int ohci_octeon_drv_remove(struct platform_device *pdev) -{ - struct usb_hcd *hcd = platform_get_drvdata(pdev); - - usb_remove_hcd(hcd); - - ohci_octeon_hw_stop(); - usb_put_hcd(hcd); - - return 0; -} - -static struct platform_driver ohci_octeon_driver = { - .probe = ohci_octeon_drv_probe, - .remove = ohci_octeon_drv_remove, - .shutdown = usb_hcd_platform_shutdown, - .driver = { - .name = OCTEON_OHCI_HCD_NAME, - .owner = THIS_MODULE, - } -}; - -MODULE_ALIAS("platform:" OCTEON_OHCI_HCD_NAME); diff --git a/drivers/usb/host/ohci-platform.c b/drivers/usb/host/ohci-platform.c index 4369299..9434c1d 100644 --- a/drivers/usb/host/ohci-platform.c +++ b/drivers/usb/host/ohci-platform.c @@ -43,20 +43,6 @@ struct ohci_platform_priv { static const char hcd_name[] = "ohci-platform"; -static int ohci_platform_reset(struct usb_hcd *hcd) -{ - struct platform_device *pdev = to_platform_device(hcd->self.controller); - struct usb_ohci_pdata *pdata = dev_get_platdata(&pdev->dev); - struct ohci_hcd *ohci = hcd_to_ohci(hcd); - - if (pdata->no_big_frame_no) - ohci->flags |= OHCI_QUIRK_FRAME_NO; - if (pdata->num_ports) - ohci->num_ports = pdata->num_ports; - - return ohci_setup(hcd); -} - static int ohci_platform_power_on(struct platform_device *dev) { struct usb_hcd *hcd = platform_get_drvdata(dev); @@ -110,7 +96,6 @@ static struct hc_driver __read_mostly ohci_platform_hc_driver; static const struct ohci_driver_overrides platform_overrides __initconst = { .product_desc = "Generic Platform OHCI controller", - .reset = ohci_platform_reset, .extra_priv_size = sizeof(struct ohci_platform_priv), }; @@ -149,12 +134,6 @@ static int ohci_platform_probe(struct platform_device *dev) return irq; } - res_mem = platform_get_resource(dev, IORESOURCE_MEM, 0); - if (!res_mem) { - dev_err(&dev->dev, "no memory resource provided"); - return -ENXIO; - } - hcd = usb_create_hcd(&ohci_platform_hc_driver, &dev->dev, dev_name(&dev->dev)); if (!hcd) @@ -175,6 +154,12 @@ static int ohci_platform_probe(struct platform_device *dev) if (of_property_read_bool(dev->dev.of_node, "big-endian")) ohci->flags |= OHCI_QUIRK_BE_MMIO | OHCI_QUIRK_BE_DESC; + if (of_property_read_bool(dev->dev.of_node, "no-big-frame-no")) + ohci->flags |= OHCI_QUIRK_FRAME_NO; + + of_property_read_u32(dev->dev.of_node, "num-ports", + &ohci->num_ports); + priv->phy = devm_phy_get(&dev->dev, "usb"); if (IS_ERR(priv->phy)) { err = PTR_ERR(priv->phy); @@ -212,6 +197,10 @@ static int ohci_platform_probe(struct platform_device *dev) ohci->flags |= OHCI_QUIRK_BE_DESC; if (pdata->big_endian_mmio) ohci->flags |= OHCI_QUIRK_BE_MMIO; + if (pdata->no_big_frame_no) + ohci->flags |= OHCI_QUIRK_FRAME_NO; + if (pdata->num_ports) + ohci->num_ports = pdata->num_ports; #ifndef CONFIG_USB_OHCI_BIG_ENDIAN_MMIO if (ohci->flags & OHCI_QUIRK_BE_MMIO) { @@ -236,14 +225,15 @@ static int ohci_platform_probe(struct platform_device *dev) goto err_reset; } - hcd->rsrc_start = res_mem->start; - hcd->rsrc_len = resource_size(res_mem); - + res_mem = platform_get_resource(dev, IORESOURCE_MEM, 0); hcd->regs = devm_ioremap_resource(&dev->dev, res_mem); if (IS_ERR(hcd->regs)) { err = PTR_ERR(hcd->regs); goto err_power; } + hcd->rsrc_start = res_mem->start; + hcd->rsrc_len = resource_size(res_mem); + err = usb_add_hcd(hcd, irq, IRQF_SHARED); if (err) goto err_power; @@ -298,8 +288,7 @@ static int ohci_platform_remove(struct platform_device *dev) return 0; } -#ifdef CONFIG_PM - +#ifdef CONFIG_PM_SLEEP static int ohci_platform_suspend(struct device *dev) { struct usb_hcd *hcd = dev_get_drvdata(dev); @@ -335,11 +324,7 @@ static int ohci_platform_resume(struct device *dev) ohci_resume(hcd, false); return 0; } - -#else /* !CONFIG_PM */ -#define ohci_platform_suspend NULL -#define ohci_platform_resume NULL -#endif /* CONFIG_PM */ +#endif /* CONFIG_PM_SLEEP */ static const struct of_device_id ohci_platform_ids[] = { { .compatible = "generic-ohci", }, @@ -353,10 +338,8 @@ static const struct platform_device_id ohci_platform_table[] = { }; MODULE_DEVICE_TABLE(platform, ohci_platform_table); -static const struct dev_pm_ops ohci_platform_pm_ops = { - .suspend = ohci_platform_suspend, - .resume = ohci_platform_resume, -}; +static SIMPLE_DEV_PM_OPS(ohci_platform_pm_ops, ohci_platform_suspend, + ohci_platform_resume); static struct platform_driver ohci_platform_driver = { .id_table = ohci_platform_table, diff --git a/drivers/usb/host/ohci-pxa27x.c b/drivers/usb/host/ohci-pxa27x.c index e68f3d0..1339981 100644 --- a/drivers/usb/host/ohci-pxa27x.c +++ b/drivers/usb/host/ohci-pxa27x.c @@ -447,20 +447,13 @@ int usb_hcd_pxa27x_probe (const struct hc_driver *driver, struct platform_device return -ENOMEM; r = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!r) { - pr_err("no resource of IORESOURCE_MEM"); - retval = -ENXIO; - goto err; - } - - hcd->rsrc_start = r->start; - hcd->rsrc_len = resource_size(r); - hcd->regs = devm_ioremap_resource(&pdev->dev, r); if (IS_ERR(hcd->regs)) { retval = PTR_ERR(hcd->regs); goto err; } + hcd->rsrc_start = r->start; + hcd->rsrc_len = resource_size(r); /* initialize "struct pxa27x_ohci" */ pxa_ohci = to_pxa27x_ohci(hcd); diff --git a/drivers/usb/host/ohci-spear.c b/drivers/usb/host/ohci-spear.c index 8d58766..4a54f9d 100644 --- a/drivers/usb/host/ohci-spear.c +++ b/drivers/usb/host/ohci-spear.c @@ -74,20 +74,15 @@ static int spear_ohci_hcd_drv_probe(struct platform_device *pdev) } res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - retval = -ENODEV; - goto err_put_hcd; - } - - hcd->rsrc_start = pdev->resource[0].start; - hcd->rsrc_len = resource_size(res); - hcd->regs = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(hcd->regs)) { retval = PTR_ERR(hcd->regs); goto err_put_hcd; } + hcd->rsrc_start = pdev->resource[0].start; + hcd->rsrc_len = resource_size(res); + sohci_p = to_spear_ohci(hcd); sohci_p->clk = usbh_clk; diff --git a/drivers/usb/host/ohci.h b/drivers/usb/host/ohci.h index 59f4245..bc46228 100644 --- a/drivers/usb/host/ohci.h +++ b/drivers/usb/host/ohci.h @@ -647,23 +647,22 @@ static inline u32 hc32_to_cpup (const struct ohci_hcd *ohci, const __hc32 *x) /*-------------------------------------------------------------------------*/ -/* HCCA frame number is 16 bits, but is accessed as 32 bits since not all - * hardware handles 16 bit reads. That creates a different confusion on - * some big-endian SOC implementations. Same thing happens with PSW access. +/* + * The HCCA frame number is 16 bits, but is accessed as 32 bits since not all + * hardware handles 16 bit reads. Depending on the SoC implementation, the + * frame number can wind up in either bits [31:16] (default) or + * [15:0] (OHCI_QUIRK_FRAME_NO) on big endian hosts. + * + * Somewhat similarly, the 16-bit PSW fields in a transfer descriptor are + * reordered on BE. */ -#ifdef CONFIG_PPC_MPC52xx -#define big_endian_frame_no_quirk(ohci) (ohci->flags & OHCI_QUIRK_FRAME_NO) -#else -#define big_endian_frame_no_quirk(ohci) 0 -#endif - static inline u16 ohci_frame_no(const struct ohci_hcd *ohci) { u32 tmp; if (big_endian_desc(ohci)) { tmp = be32_to_cpup((__force __be32 *)&ohci->hcca->frame_no); - if (!big_endian_frame_no_quirk(ohci)) + if (!(ohci->flags & OHCI_QUIRK_FRAME_NO)) tmp >>= 16; } else tmp = le32_to_cpup((__force __le32 *)&ohci->hcca->frame_no); diff --git a/drivers/usb/host/oxu210hp-hcd.c b/drivers/usb/host/oxu210hp-hcd.c index 4fe79a2..75811dd 100644 --- a/drivers/usb/host/oxu210hp-hcd.c +++ b/drivers/usb/host/oxu210hp-hcd.c @@ -3846,7 +3846,6 @@ static int oxu_drv_probe(struct platform_device *pdev) */ info = devm_kzalloc(&pdev->dev, sizeof(struct oxu_info), GFP_KERNEL); if (!info) { - dev_dbg(&pdev->dev, "error allocating memory\n"); ret = -EFAULT; goto error; } diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c index 2f3aceb..dd483c1 100644 --- a/drivers/usb/host/pci-quirks.c +++ b/drivers/usb/host/pci-quirks.c @@ -233,10 +233,8 @@ commit: spin_unlock_irqrestore(&amd_lock, flags); - if (info.nb_dev) - pci_dev_put(info.nb_dev); - if (info.smbus_dev) - pci_dev_put(info.smbus_dev); + pci_dev_put(info.nb_dev); + pci_dev_put(info.smbus_dev); } else { /* no race - commit the result */ @@ -447,10 +445,8 @@ void usb_amd_dev_put(void) spin_unlock_irqrestore(&amd_lock, flags); - if (nb) - pci_dev_put(nb); - if (smbus) - pci_dev_put(smbus); + pci_dev_put(nb); + pci_dev_put(smbus); } EXPORT_SYMBOL_GPL(usb_amd_dev_put); diff --git a/drivers/usb/host/uhci-platform.c b/drivers/usb/host/uhci-platform.c index b987f1d..cf8f460 100644 --- a/drivers/usb/host/uhci-platform.c +++ b/drivers/usb/host/uhci-platform.c @@ -86,14 +86,14 @@ static int uhci_hcd_platform_probe(struct platform_device *pdev) return -ENOMEM; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - hcd->rsrc_start = res->start; - hcd->rsrc_len = resource_size(res); - hcd->regs = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(hcd->regs)) { ret = PTR_ERR(hcd->regs); goto err_rmr; } + hcd->rsrc_start = res->start; + hcd->rsrc_len = resource_size(res); + uhci = hcd_to_uhci(hcd); uhci->regs = hcd->regs; diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 280dde9..9a69b1f 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -128,20 +128,6 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) xhci->quirks |= XHCI_AVOID_BEI; } if (pdev->vendor == PCI_VENDOR_ID_INTEL && - (pdev->device == PCI_DEVICE_ID_INTEL_LYNXPOINT_XHCI || - pdev->device == PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI)) { - /* Workaround for occasional spurious wakeups from S5 (or - * any other sleep) on Haswell machines with LPT and LPT-LP - * with the new Intel BIOS - */ - /* Limit the quirk to only known vendors, as this triggers - * yet another BIOS bug on some other machines - * https://bugzilla.kernel.org/show_bug.cgi?id=66171 - */ - if (pdev->subsystem_vendor == PCI_VENDOR_ID_HP) - xhci->quirks |= XHCI_SPURIOUS_WAKEUP; - } - if (pdev->vendor == PCI_VENDOR_ID_INTEL && pdev->device == PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_XHCI) { xhci->quirks |= XHCI_SPURIOUS_REBOOT; } @@ -162,6 +148,10 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci) pdev->device == 0x3432) xhci->quirks |= XHCI_BROKEN_STREAMS; + if (pdev->vendor == PCI_VENDOR_ID_ASMEDIA && + pdev->device == 0x1042) + xhci->quirks |= XHCI_BROKEN_STREAMS; + if (xhci->quirks & XHCI_RESET_ON_RESUME) xhci_dbg_trace(xhci, trace_xhci_dbg_quirks, "QUIRK: Resetting on resume"); diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c index 3d78b0c..e68b4ec 100644 --- a/drivers/usb/host/xhci-plat.c +++ b/drivers/usb/host/xhci-plat.c @@ -83,9 +83,6 @@ static int xhci_plat_probe(struct platform_device *pdev) if (irq < 0) return -ENODEV; - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) - return -ENODEV; if (of_device_is_compatible(pdev->dev.of_node, "marvell,armada-375-xhci") || @@ -109,15 +106,16 @@ static int xhci_plat_probe(struct platform_device *pdev) if (!hcd) return -ENOMEM; - hcd->rsrc_start = res->start; - hcd->rsrc_len = resource_size(res); - + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); hcd->regs = devm_ioremap_resource(&pdev->dev, res); if (IS_ERR(hcd->regs)) { ret = PTR_ERR(hcd->regs); goto put_hcd; } + hcd->rsrc_start = res->start; + hcd->rsrc_len = resource_size(res); + /* * Not all platforms have a clk so it is not an error if the * clock does not exists. diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c index 633caf6..022dc00 100644 --- a/drivers/usb/misc/sisusbvga/sisusb.c +++ b/drivers/usb/misc/sisusbvga/sisusb.c @@ -2472,8 +2472,7 @@ sisusb_delete(struct kref *kref) if (!sisusb) return; - if (sisusb->sisusb_dev) - usb_put_dev(sisusb->sisusb_dev); + usb_put_dev(sisusb->sisusb_dev); sisusb->sisusb_dev = NULL; sisusb_free_buffers(sisusb); diff --git a/drivers/usb/misc/usb3503.c b/drivers/usb/misc/usb3503.c index ae7e120..b9af8cb 100644 --- a/drivers/usb/misc/usb3503.c +++ b/drivers/usb/misc/usb3503.c @@ -314,10 +314,8 @@ static int usb3503_i2c_probe(struct i2c_client *i2c, int err; hub = devm_kzalloc(&i2c->dev, sizeof(struct usb3503), GFP_KERNEL); - if (!hub) { - dev_err(&i2c->dev, "private data alloc fail\n"); + if (!hub) return -ENOMEM; - } i2c_set_clientdata(i2c, hub); hub->regmap = devm_regmap_init_i2c(i2c, &usb3503_regmap_config); @@ -336,10 +334,8 @@ static int usb3503_platform_probe(struct platform_device *pdev) struct usb3503 *hub; hub = devm_kzalloc(&pdev->dev, sizeof(struct usb3503), GFP_KERNEL); - if (!hub) { - dev_err(&pdev->dev, "private data alloc fail\n"); + if (!hub) return -ENOMEM; - } hub->dev = &pdev->dev; return usb3503_probe(hub); diff --git a/drivers/usb/misc/yurex.c b/drivers/usb/misc/yurex.c index c3a45da..343fa6f 100644 --- a/drivers/usb/misc/yurex.c +++ b/drivers/usb/misc/yurex.c @@ -410,7 +410,8 @@ static int yurex_release(struct inode *inode, struct file *file) return 0; } -static ssize_t yurex_read(struct file *file, char *buffer, size_t count, loff_t *ppos) +static ssize_t yurex_read(struct file *file, char __user *buffer, size_t count, + loff_t *ppos) { struct usb_yurex *dev; int retval = 0; @@ -444,7 +445,8 @@ exit: return retval; } -static ssize_t yurex_write(struct file *file, const char *user_buffer, size_t count, loff_t *ppos) +static ssize_t yurex_write(struct file *file, const char __user *user_buffer, + size_t count, loff_t *ppos) { struct usb_yurex *dev; int i, set = 0, retval = 0; diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c index 3d2bd65..02c420a 100644 --- a/drivers/usb/serial/kobil_sct.c +++ b/drivers/usb/serial/kobil_sct.c @@ -335,7 +335,8 @@ static int kobil_write(struct tty_struct *tty, struct usb_serial_port *port, port->interrupt_out_urb->transfer_buffer_length = length; priv->cur_pos = priv->cur_pos + length; - result = usb_submit_urb(port->interrupt_out_urb, GFP_NOIO); + result = usb_submit_urb(port->interrupt_out_urb, + GFP_ATOMIC); dev_dbg(&port->dev, "%s - Send write URB returns: %i\n", __func__, result); todo = priv->filled - priv->cur_pos; @@ -350,7 +351,7 @@ static int kobil_write(struct tty_struct *tty, struct usb_serial_port *port, if (priv->device_type == KOBIL_ADAPTER_B_PRODUCT_ID || priv->device_type == KOBIL_ADAPTER_K_PRODUCT_ID) { result = usb_submit_urb(port->interrupt_in_urb, - GFP_NOIO); + GFP_ATOMIC); dev_dbg(&port->dev, "%s - Send read URB returns: %i\n", __func__, result); } } diff --git a/drivers/usb/serial/opticon.c b/drivers/usb/serial/opticon.c index 4856fb7..4b7bfb3 100644 --- a/drivers/usb/serial/opticon.c +++ b/drivers/usb/serial/opticon.c @@ -215,7 +215,7 @@ static int opticon_write(struct tty_struct *tty, struct usb_serial_port *port, /* The connected devices do not have a bulk write endpoint, * to transmit data to de barcode device the control endpoint is used */ - dr = kmalloc(sizeof(struct usb_ctrlrequest), GFP_NOIO); + dr = kmalloc(sizeof(struct usb_ctrlrequest), GFP_ATOMIC); if (!dr) { count = -ENOMEM; goto error_no_dr; diff --git a/drivers/usb/storage/debug.c b/drivers/usb/storage/debug.c index e08f647..05bc379 100644 --- a/drivers/usb/storage/debug.c +++ b/drivers/usb/storage/debug.c @@ -179,17 +179,14 @@ void usb_stor_show_sense(const struct us_data *us, US_DEBUGPX("\n"); } -int usb_stor_dbg(const struct us_data *us, const char *fmt, ...) +void usb_stor_dbg(const struct us_data *us, const char *fmt, ...) { va_list args; - int r; va_start(args, fmt); - r = dev_vprintk_emit(7, &us->pusb_dev->dev, fmt, args); + dev_vprintk_emit(7, &us->pusb_dev->dev, fmt, args); va_end(args); - - return r; } EXPORT_SYMBOL_GPL(usb_stor_dbg); diff --git a/drivers/usb/storage/debug.h b/drivers/usb/storage/debug.h index b1273f0..f525203 100644 --- a/drivers/usb/storage/debug.h +++ b/drivers/usb/storage/debug.h @@ -50,15 +50,17 @@ void usb_stor_show_command(const struct us_data *us, struct scsi_cmnd *srb); void usb_stor_show_sense(const struct us_data *us, unsigned char key, unsigned char asc, unsigned char ascq); -__printf(2, 3) int usb_stor_dbg(const struct us_data *us, - const char *fmt, ...); +__printf(2, 3) void usb_stor_dbg(const struct us_data *us, + const char *fmt, ...); #define US_DEBUGPX(fmt, ...) printk(fmt, ##__VA_ARGS__) #define US_DEBUG(x) x #else __printf(2, 3) -static inline int _usb_stor_dbg(const struct us_data *us, - const char *fmt, ...) {return 1;} +static inline void _usb_stor_dbg(const struct us_data *us, + const char *fmt, ...) +{ +} #define usb_stor_dbg(us, fmt, ...) \ do { if (0) _usb_stor_dbg(us, fmt, ##__VA_ARGS__); } while (0) #define US_DEBUGPX(fmt, ...) \ diff --git a/drivers/usb/storage/initializers.c b/drivers/usb/storage/initializers.c index 4bc2fc9..31fa2e9 100644 --- a/drivers/usb/storage/initializers.c +++ b/drivers/usb/storage/initializers.c @@ -49,10 +49,9 @@ int usb_stor_euscsi_init(struct us_data *us) int result; usb_stor_dbg(us, "Attempting to init eUSCSI bridge...\n"); - us->iobuf[0] = 0x1; result = usb_stor_control_msg(us, us->send_ctrl_pipe, 0x0C, USB_RECIP_INTERFACE | USB_TYPE_VENDOR, - 0x01, 0x0, us->iobuf, 0x1, USB_CTRL_SET_TIMEOUT); + 0x01, 0x0, NULL, 0x0, 5 * HZ); usb_stor_dbg(us, "-- result is %d\n", result); return 0; @@ -100,7 +99,7 @@ int usb_stor_huawei_e220_init(struct us_data *us) result = usb_stor_control_msg(us, us->send_ctrl_pipe, USB_REQ_SET_FEATURE, USB_TYPE_STANDARD | USB_RECIP_DEVICE, - 0x01, 0x0, NULL, 0x0, 1000); + 0x01, 0x0, NULL, 0x0, 1 * HZ); usb_stor_dbg(us, "Huawei mode set result is %d\n", result); return 0; } diff --git a/drivers/usb/storage/realtek_cr.c b/drivers/usb/storage/realtek_cr.c index 8591d89..27e4a58 100644 --- a/drivers/usb/storage/realtek_cr.c +++ b/drivers/usb/storage/realtek_cr.c @@ -626,6 +626,7 @@ static int config_autodelink_after_power_on(struct us_data *us) return 0; } +#ifdef CONFIG_PM static int config_autodelink_before_power_down(struct us_data *us) { struct rts51x_chip *chip = (struct rts51x_chip *)(us->extra); @@ -716,6 +717,7 @@ static void fw5895_init(struct us_data *us) } } } +#endif #ifdef CONFIG_REALTEK_AUTOPM static void fw5895_set_mmc_wp(struct us_data *us) diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c index 22c7d43..540add2 100644 --- a/drivers/usb/storage/transport.c +++ b/drivers/usb/storage/transport.c @@ -1035,9 +1035,20 @@ int usb_stor_Bulk_max_lun(struct us_data *us) usb_stor_dbg(us, "GetMaxLUN command result is %d, data is %d\n", result, us->iobuf[0]); - /* if we have a successful request, return the result */ - if (result > 0) - return us->iobuf[0]; + /* + * If we have a successful request, return the result if valid. The + * CBW LUN field is 4 bits wide, so the value reported by the device + * should fit into that. + */ + if (result > 0) { + if (us->iobuf[0] < 16) { + return us->iobuf[0]; + } else { + dev_info(&us->pusb_intf->dev, + "Max LUN %d is not valid, using 0 instead", + us->iobuf[0]); + } + } /* * Some devices don't like GetMaxLUN. They may STALL the control @@ -1118,6 +1129,31 @@ int usb_stor_Bulk_transport(struct scsi_cmnd *srb, struct us_data *us) */ if (result == USB_STOR_XFER_LONG) fake_sense = 1; + + /* + * Sometimes a device will mistakenly skip the data phase + * and go directly to the status phase without sending a + * zero-length packet. If we get a 13-byte response here, + * check whether it really is a CSW. + */ + if (result == USB_STOR_XFER_SHORT && + srb->sc_data_direction == DMA_FROM_DEVICE && + transfer_length - scsi_get_resid(srb) == + US_BULK_CS_WRAP_LEN) { + struct scatterlist *sg = NULL; + unsigned int offset = 0; + + if (usb_stor_access_xfer_buf((unsigned char *) bcs, + US_BULK_CS_WRAP_LEN, srb, &sg, + &offset, FROM_XFER_BUF) == + US_BULK_CS_WRAP_LEN && + bcs->Signature == + cpu_to_le32(US_BULK_CS_SIGN)) { + usb_stor_dbg(us, "Device skipped data phase\n"); + scsi_set_resid(srb, transfer_length); + goto skipped_data_phase; + } + } } /* See flow chart on pg 15 of the Bulk Only Transport spec for @@ -1153,6 +1189,7 @@ int usb_stor_Bulk_transport(struct scsi_cmnd *srb, struct us_data *us) if (result != USB_STOR_XFER_GOOD) return USB_STOR_TRANSPORT_ERROR; + skipped_data_phase: /* check bulk status */ residue = le32_to_cpu(bcs->Residue); usb_stor_dbg(us, "Bulk Status S 0x%x T 0x%x R %u Stat 0x%x\n", diff --git a/drivers/usb/storage/uas.c b/drivers/usb/storage/uas.c index 89b2434..004ebc1 100644 --- a/drivers/usb/storage/uas.c +++ b/drivers/usb/storage/uas.c @@ -66,7 +66,7 @@ enum { /* Overrides scsi_pointer */ struct uas_cmd_info { unsigned int state; - unsigned int stream; + unsigned int uas_tag; struct urb *cmd_urb; struct urb *data_in_urb; struct urb *data_out_urb; @@ -173,30 +173,15 @@ static void uas_sense(struct urb *urb, struct scsi_cmnd *cmnd) cmnd->result = sense_iu->status; } -/* - * scsi-tags go from 0 - (nr_tags - 1), uas tags need to match stream-ids, - * which go from 1 - nr_streams. And we use 1 for untagged commands. - */ -static int uas_get_tag(struct scsi_cmnd *cmnd) -{ - int tag; - - if (blk_rq_tagged(cmnd->request)) - tag = cmnd->request->tag + 2; - else - tag = 1; - - return tag; -} - static void uas_log_cmd_state(struct scsi_cmnd *cmnd, const char *prefix, int status) { struct uas_cmd_info *ci = (void *)&cmnd->SCp; + struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp; scmd_printk(KERN_INFO, cmnd, - "%s %d tag %d inflight:%s%s%s%s%s%s%s%s%s%s%s%s ", - prefix, status, uas_get_tag(cmnd), + "%s %d uas-tag %d inflight:%s%s%s%s%s%s%s%s%s%s%s%s ", + prefix, status, cmdinfo->uas_tag, (ci->state & SUBMIT_STATUS_URB) ? " s-st" : "", (ci->state & ALLOC_DATA_IN_URB) ? " a-in" : "", (ci->state & SUBMIT_DATA_IN_URB) ? " s-in" : "", @@ -242,7 +227,7 @@ static int uas_try_complete(struct scsi_cmnd *cmnd, const char *caller) DATA_OUT_URB_INFLIGHT | COMMAND_ABORTED)) return -EBUSY; - devinfo->cmnd[uas_get_tag(cmnd) - 1] = NULL; + devinfo->cmnd[cmdinfo->uas_tag - 1] = NULL; uas_free_unsubmitted_urbs(cmnd); cmnd->scsi_done(cmnd); return 0; @@ -289,7 +274,7 @@ static void uas_stat_cmplt(struct urb *urb) idx = be16_to_cpup(&iu->tag) - 1; if (idx >= MAX_CMNDS || !devinfo->cmnd[idx]) { dev_err(&urb->dev->dev, - "stat urb: no pending cmd for tag %d\n", idx + 1); + "stat urb: no pending cmd for uas-tag %d\n", idx + 1); goto out; } @@ -427,7 +412,8 @@ static struct urb *uas_alloc_data_urb(struct uas_dev_info *devinfo, gfp_t gfp, goto out; usb_fill_bulk_urb(urb, udev, pipe, NULL, sdb->length, uas_data_cmplt, cmnd); - urb->stream_id = cmdinfo->stream; + if (devinfo->use_streams) + urb->stream_id = cmdinfo->uas_tag; urb->num_sgs = udev->bus->sg_tablesize ? sdb->table.nents : 0; urb->sg = sdb->table.sgl; out: @@ -451,7 +437,8 @@ static struct urb *uas_alloc_sense_urb(struct uas_dev_info *devinfo, gfp_t gfp, usb_fill_bulk_urb(urb, udev, devinfo->status_pipe, iu, sizeof(*iu), uas_stat_cmplt, cmnd->device->host); - urb->stream_id = cmdinfo->stream; + if (devinfo->use_streams) + urb->stream_id = cmdinfo->uas_tag; urb->transfer_flags |= URB_FREE_BUFFER; out: return urb; @@ -465,6 +452,7 @@ static struct urb *uas_alloc_cmd_urb(struct uas_dev_info *devinfo, gfp_t gfp, { struct usb_device *udev = devinfo->udev; struct scsi_device *sdev = cmnd->device; + struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp; struct urb *urb = usb_alloc_urb(0, gfp); struct command_iu *iu; int len; @@ -481,7 +469,7 @@ static struct urb *uas_alloc_cmd_urb(struct uas_dev_info *devinfo, gfp_t gfp, goto free; iu->iu_id = IU_ID_COMMAND; - iu->tag = cpu_to_be16(uas_get_tag(cmnd)); + iu->tag = cpu_to_be16(cmdinfo->uas_tag); iu->prio_attr = UAS_SIMPLE_TAG; iu->len = len; int_to_scsilun(sdev->lun, &iu->lun); @@ -608,8 +596,7 @@ static int uas_queuecommand_lck(struct scsi_cmnd *cmnd, struct uas_dev_info *devinfo = sdev->hostdata; struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp; unsigned long flags; - unsigned int stream; - int err; + int idx, err; BUILD_BUG_ON(sizeof(struct uas_cmd_info) > sizeof(struct scsi_pointer)); @@ -635,8 +622,12 @@ static int uas_queuecommand_lck(struct scsi_cmnd *cmnd, return 0; } - stream = uas_get_tag(cmnd); - if (devinfo->cmnd[stream - 1]) { + /* Find a free uas-tag */ + for (idx = 0; idx < devinfo->qdepth; idx++) { + if (!devinfo->cmnd[idx]) + break; + } + if (idx == devinfo->qdepth) { spin_unlock_irqrestore(&devinfo->lock, flags); return SCSI_MLQUEUE_DEVICE_BUSY; } @@ -644,7 +635,7 @@ static int uas_queuecommand_lck(struct scsi_cmnd *cmnd, cmnd->scsi_done = done; memset(cmdinfo, 0, sizeof(*cmdinfo)); - cmdinfo->stream = stream; + cmdinfo->uas_tag = idx + 1; /* uas-tag == usb-stream-id, so 1 based */ cmdinfo->state = SUBMIT_STATUS_URB | ALLOC_CMD_URB | SUBMIT_CMD_URB; switch (cmnd->sc_data_direction) { @@ -659,10 +650,8 @@ static int uas_queuecommand_lck(struct scsi_cmnd *cmnd, break; } - if (!devinfo->use_streams) { + if (!devinfo->use_streams) cmdinfo->state &= ~(SUBMIT_DATA_IN_URB | SUBMIT_DATA_OUT_URB); - cmdinfo->stream = 0; - } err = uas_submit_urbs(cmnd, devinfo, GFP_ATOMIC); if (err) { @@ -674,7 +663,7 @@ static int uas_queuecommand_lck(struct scsi_cmnd *cmnd, uas_add_work(cmdinfo); } - devinfo->cmnd[stream - 1] = cmnd; + devinfo->cmnd[idx] = cmnd; spin_unlock_irqrestore(&devinfo->lock, flags); return 0; } @@ -702,7 +691,7 @@ static int uas_eh_abort_handler(struct scsi_cmnd *cmnd) cmdinfo->state |= COMMAND_ABORTED; /* Drop all refs to this cmnd, kill data urbs to break their ref */ - devinfo->cmnd[uas_get_tag(cmnd) - 1] = NULL; + devinfo->cmnd[cmdinfo->uas_tag - 1] = NULL; if (cmdinfo->state & DATA_IN_URB_INFLIGHT) data_in_urb = usb_get_urb(cmdinfo->data_in_urb); if (cmdinfo->state & DATA_OUT_URB_INFLIGHT) @@ -818,13 +807,6 @@ static struct scsi_host_template uas_host_template = { .cmd_per_lun = 1, /* until we override it */ .skip_settle_delay = 1, .ordered_tag = 1, - - /* - * The uas drivers expects tags not to be bigger than the maximum - * per-device queue depth, which is not true with the blk-mq tag - * allocator. - */ - .disable_blk_mq = true, }; #define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \ diff --git a/drivers/usb/storage/unusual_uas.h b/drivers/usb/storage/unusual_uas.h index 8511b54..2fefaf9 100644 --- a/drivers/usb/storage/unusual_uas.h +++ b/drivers/usb/storage/unusual_uas.h @@ -54,6 +54,20 @@ UNUSUAL_DEV(0x0bc2, 0x3312, 0x0000, 0x9999, USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_NO_ATA_1X), +/* Reported-by: Hans de Goede <hdegoede@redhat.com> */ +UNUSUAL_DEV(0x0bc2, 0x3320, 0x0000, 0x9999, + "Seagate", + "Expansion Desk", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_NO_ATA_1X), + +/* Reported-by: Bogdan Mihalcea <bogdan.mihalcea@infim.ro> */ +UNUSUAL_DEV(0x0bc2, 0xa003, 0x0000, 0x9999, + "Seagate", + "Backup Plus", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_NO_ATA_1X), + /* https://bbs.archlinux.org/viewtopic.php?id=183190 */ UNUSUAL_DEV(0x0bc2, 0xab20, 0x0000, 0x9999, "Seagate", @@ -61,6 +75,13 @@ UNUSUAL_DEV(0x0bc2, 0xab20, 0x0000, 0x9999, USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_NO_ATA_1X), +/* https://bbs.archlinux.org/viewtopic.php?id=183190 */ +UNUSUAL_DEV(0x0bc2, 0xab21, 0x0000, 0x9999, + "Seagate", + "Backup+ BK", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_NO_ATA_1X), + /* Reported-by: Claudio Bizzarri <claudio.bizzarri@gmail.com> */ UNUSUAL_DEV(0x152d, 0x0567, 0x0000, 0x9999, "JMicron", @@ -75,3 +96,10 @@ UNUSUAL_DEV(0x174c, 0x5106, 0x0000, 0x9999, "ASM1051", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_IGNORE_UAS), + +/* Reported-by: Hans de Goede <hdegoede@redhat.com> */ +UNUSUAL_DEV(0x2109, 0x0711, 0x0000, 0x9999, + "VIA", + "VL711", + USB_SC_DEVICE, USB_PR_DEVICE, NULL, + US_FL_NO_ATA_1X), diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c index 9d66ce6..d468d02 100644 --- a/drivers/usb/storage/usb.c +++ b/drivers/usb/storage/usb.c @@ -884,7 +884,9 @@ static void usb_stor_scan_dwork(struct work_struct *work) dev_dbg(dev, "starting scan\n"); /* For bulk-only devices, determine the max LUN value */ - if (us->protocol == USB_PR_BULK && !(us->fflags & US_FL_SINGLE_LUN)) { + if (us->protocol == USB_PR_BULK && + !(us->fflags & US_FL_SINGLE_LUN) && + !(us->fflags & US_FL_SCM_MULT_TARG)) { mutex_lock(&us->dev_mutex); us->max_lun = usb_stor_Bulk_max_lun(us); mutex_unlock(&us->dev_mutex); @@ -983,21 +985,31 @@ int usb_stor_probe2(struct us_data *us) usb_stor_dbg(us, "Transport: %s\n", us->transport_name); usb_stor_dbg(us, "Protocol: %s\n", us->protocol_name); + if (us->fflags & US_FL_SCM_MULT_TARG) { + /* + * SCM eUSCSI bridge devices can have different numbers + * of LUNs on different targets; allow all to be probed. + */ + us->max_lun = 7; + /* The eUSCSI itself has ID 7, so avoid scanning that */ + us_to_host(us)->this_id = 7; + /* max_id is 8 initially, so no need to set it here */ + } else { + /* In the normal case there is only a single target */ + us_to_host(us)->max_id = 1; + /* + * Like Windows, we won't store the LUN bits in CDB[1] for + * SCSI-2 devices using the Bulk-Only transport (even though + * this violates the SCSI spec). + */ + if (us->transport == usb_stor_Bulk_transport) + us_to_host(us)->no_scsi2_lun_in_cdb = 1; + } + /* fix for single-lun devices */ if (us->fflags & US_FL_SINGLE_LUN) us->max_lun = 0; - if (!(us->fflags & US_FL_SCM_MULT_TARG)) - us_to_host(us)->max_id = 1; - - /* - * Like Windows, we won't store the LUN bits in CDB[1] for SCSI-2 - * devices using the Bulk-Only transport (even though this violates - * the SCSI spec). - */ - if (us->transport == usb_stor_Bulk_transport) - us_to_host(us)->no_scsi2_lun_in_cdb = 1; - /* Find the endpoints and calculate pipe values */ result = get_pipes(us); if (result) diff --git a/drivers/usb/usbip/vhci_hcd.c b/drivers/usb/usbip/vhci_hcd.c index c02374b..cc1b03e 100644 --- a/drivers/usb/usbip/vhci_hcd.c +++ b/drivers/usb/usbip/vhci_hcd.c @@ -518,8 +518,7 @@ static int vhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, dev_info(dev, "SetAddress Request (%d) to port %d\n", ctrlreq->wValue, vdev->rhport); - if (vdev->udev) - usb_put_dev(vdev->udev); + usb_put_dev(vdev->udev); vdev->udev = usb_get_dev(urb->dev); spin_lock(&vdev->ud.lock); @@ -539,8 +538,7 @@ static int vhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, usbip_dbg_vhci_hc( "Not yet?:Get_Descriptor to device 0 (get max pipe size)\n"); - if (vdev->udev) - usb_put_dev(vdev->udev); + usb_put_dev(vdev->udev); vdev->udev = usb_get_dev(urb->dev); goto out; @@ -831,8 +829,7 @@ static void vhci_device_reset(struct usbip_device *ud) vdev->speed = 0; vdev->devid = 0; - if (vdev->udev) - usb_put_dev(vdev->udev); + usb_put_dev(vdev->udev); vdev->udev = NULL; if (ud->tcp_socket) { diff --git a/drivers/uwb/rsv.c b/drivers/uwb/rsv.c index 0887ae9..536ad42 100644 --- a/drivers/uwb/rsv.c +++ b/drivers/uwb/rsv.c @@ -213,7 +213,7 @@ void uwb_rsv_backoff_win_timer(unsigned long arg) bow->total_expired = 0; bow->window = UWB_DRP_BACKOFF_WIN_MIN >> 1; } - dev_dbg(dev, "backoff_win_timer total_expired=%d, n=%d\n: ", bow->total_expired, bow->n); + dev_dbg(dev, "backoff_win_timer total_expired=%d, n=%d\n", bow->total_expired, bow->n); /* try to relocate all the "to be moved" relocations */ uwb_rsv_handle_drp_avail_change(rc); @@ -234,7 +234,7 @@ void uwb_rsv_backoff_win_increment(struct uwb_rc *rc) bow->window <<= 1; bow->n = prandom_u32() & (bow->window - 1); - dev_dbg(dev, "new_window=%d, n=%d\n: ", bow->window, bow->n); + dev_dbg(dev, "new_window=%d, n=%d\n", bow->window, bow->n); /* reset the timer associated variables */ timeout_us = bow->n * UWB_SUPERFRAME_LENGTH_US; diff --git a/fs/btrfs/file-item.c b/fs/btrfs/file-item.c index 783a943..84a2d18 100644 --- a/fs/btrfs/file-item.c +++ b/fs/btrfs/file-item.c @@ -413,7 +413,7 @@ int btrfs_lookup_csums_range(struct btrfs_root *root, u64 start, u64 end, ret = 0; fail: while (ret < 0 && !list_empty(&tmplist)) { - sums = list_entry(&tmplist, struct btrfs_ordered_sum, list); + sums = list_entry(tmplist.next, struct btrfs_ordered_sum, list); list_del(&sums->list); kfree(sums); } diff --git a/fs/ocfs2/cluster/tcp.c b/fs/ocfs2/cluster/tcp.c index 97de0fb..a960440 100644 --- a/fs/ocfs2/cluster/tcp.c +++ b/fs/ocfs2/cluster/tcp.c @@ -925,7 +925,7 @@ static int o2net_send_tcp_msg(struct socket *sock, struct kvec *vec, size_t veclen, size_t total) { int ret; - struct msghdr msg; + struct msghdr msg = {.msg_flags = 0,}; if (sock == NULL) { ret = -EINVAL; diff --git a/fs/overlayfs/readdir.c b/fs/overlayfs/readdir.c index 4e9d7c1..2a7ef4f 100644 --- a/fs/overlayfs/readdir.c +++ b/fs/overlayfs/readdir.c @@ -168,7 +168,7 @@ static void ovl_cache_put(struct ovl_dir_file *od, struct dentry *dentry) { struct ovl_dir_cache *cache = od->cache; - list_del(&od->cursor.l_node); + list_del_init(&od->cursor.l_node); WARN_ON(cache->refcount <= 0); cache->refcount--; if (!cache->refcount) { diff --git a/fs/xfs/xfs_bmap_util.c b/fs/xfs/xfs_bmap_util.c index 92e8f99..2810026 100644 --- a/fs/xfs/xfs_bmap_util.c +++ b/fs/xfs/xfs_bmap_util.c @@ -1338,7 +1338,10 @@ xfs_free_file_space( goto out; } - +/* + * Preallocate and zero a range of a file. This mechanism has the allocation + * semantics of fallocate and in addition converts data in the range to zeroes. + */ int xfs_zero_file_space( struct xfs_inode *ip, @@ -1346,65 +1349,30 @@ xfs_zero_file_space( xfs_off_t len) { struct xfs_mount *mp = ip->i_mount; - uint granularity; - xfs_off_t start_boundary; - xfs_off_t end_boundary; + uint blksize; int error; trace_xfs_zero_file_space(ip); - granularity = max_t(uint, 1 << mp->m_sb.sb_blocklog, PAGE_CACHE_SIZE); + blksize = 1 << mp->m_sb.sb_blocklog; /* - * Round the range of extents we are going to convert inwards. If the - * offset is aligned, then it doesn't get changed so we zero from the - * start of the block offset points to. + * Punch a hole and prealloc the range. We use hole punch rather than + * unwritten extent conversion for two reasons: + * + * 1.) Hole punch handles partial block zeroing for us. + * + * 2.) If prealloc returns ENOSPC, the file range is still zero-valued + * by virtue of the hole punch. */ - start_boundary = round_up(offset, granularity); - end_boundary = round_down(offset + len, granularity); - - ASSERT(start_boundary >= offset); - ASSERT(end_boundary <= offset + len); - - if (start_boundary < end_boundary - 1) { - /* - * Writeback the range to ensure any inode size updates due to - * appending writes make it to disk (otherwise we could just - * punch out the delalloc blocks). - */ - error = filemap_write_and_wait_range(VFS_I(ip)->i_mapping, - start_boundary, end_boundary - 1); - if (error) - goto out; - truncate_pagecache_range(VFS_I(ip), start_boundary, - end_boundary - 1); - - /* convert the blocks */ - error = xfs_alloc_file_space(ip, start_boundary, - end_boundary - start_boundary - 1, - XFS_BMAPI_PREALLOC | XFS_BMAPI_CONVERT); - if (error) - goto out; - - /* We've handled the interior of the range, now for the edges */ - if (start_boundary != offset) { - error = xfs_iozero(ip, offset, start_boundary - offset); - if (error) - goto out; - } - - if (end_boundary != offset + len) - error = xfs_iozero(ip, end_boundary, - offset + len - end_boundary); - - } else { - /* - * It's either a sub-granularity range or the range spanned lies - * partially across two adjacent blocks. - */ - error = xfs_iozero(ip, offset, len); - } + error = xfs_free_file_space(ip, offset, len); + if (error) + goto out; + error = xfs_alloc_file_space(ip, round_down(offset, blksize), + round_up(offset + len, blksize) - + round_down(offset, blksize), + XFS_BMAPI_PREALLOC); out: return error; diff --git a/fs/xfs/xfs_itable.c b/fs/xfs/xfs_itable.c index f1deb96..894924a 100644 --- a/fs/xfs/xfs_itable.c +++ b/fs/xfs/xfs_itable.c @@ -236,8 +236,10 @@ xfs_bulkstat_grab_ichunk( XFS_WANT_CORRUPTED_RETURN(stat == 1); /* Check if the record contains the inode in request */ - if (irec->ir_startino + XFS_INODES_PER_CHUNK <= agino) - return -EINVAL; + if (irec->ir_startino + XFS_INODES_PER_CHUNK <= agino) { + *icount = 0; + return 0; + } idx = agino - irec->ir_startino + 1; if (idx < XFS_INODES_PER_CHUNK && @@ -262,75 +264,76 @@ xfs_bulkstat_grab_ichunk( #define XFS_BULKSTAT_UBLEFT(ubleft) ((ubleft) >= statstruct_size) +struct xfs_bulkstat_agichunk { + char __user **ac_ubuffer;/* pointer into user's buffer */ + int ac_ubleft; /* bytes left in user's buffer */ + int ac_ubelem; /* spaces used in user's buffer */ +}; + /* * Process inodes in chunk with a pointer to a formatter function * that will iget the inode and fill in the appropriate structure. */ -int +static int xfs_bulkstat_ag_ichunk( struct xfs_mount *mp, xfs_agnumber_t agno, struct xfs_inobt_rec_incore *irbp, bulkstat_one_pf formatter, size_t statstruct_size, - struct xfs_bulkstat_agichunk *acp) + struct xfs_bulkstat_agichunk *acp, + xfs_agino_t *last_agino) { - xfs_ino_t lastino = acp->ac_lastino; char __user **ubufp = acp->ac_ubuffer; - int ubleft = acp->ac_ubleft; - int ubelem = acp->ac_ubelem; - int chunkidx, clustidx; + int chunkidx; int error = 0; - xfs_agino_t agino; + xfs_agino_t agino = irbp->ir_startino; - for (agino = irbp->ir_startino, chunkidx = clustidx = 0; - XFS_BULKSTAT_UBLEFT(ubleft) && - irbp->ir_freecount < XFS_INODES_PER_CHUNK; - chunkidx++, clustidx++, agino++) { - int fmterror; /* bulkstat formatter result */ + for (chunkidx = 0; chunkidx < XFS_INODES_PER_CHUNK; + chunkidx++, agino++) { + int fmterror; int ubused; - xfs_ino_t ino = XFS_AGINO_TO_INO(mp, agno, agino); - ASSERT(chunkidx < XFS_INODES_PER_CHUNK); + /* inode won't fit in buffer, we are done */ + if (acp->ac_ubleft < statstruct_size) + break; /* Skip if this inode is free */ - if (XFS_INOBT_MASK(chunkidx) & irbp->ir_free) { - lastino = ino; + if (XFS_INOBT_MASK(chunkidx) & irbp->ir_free) continue; - } - - /* - * Count used inodes as free so we can tell when the - * chunk is used up. - */ - irbp->ir_freecount++; /* Get the inode and fill in a single buffer */ ubused = statstruct_size; - error = formatter(mp, ino, *ubufp, ubleft, &ubused, &fmterror); - if (fmterror == BULKSTAT_RV_NOTHING) { - if (error && error != -ENOENT && error != -EINVAL) { - ubleft = 0; - break; - } - lastino = ino; - continue; - } - if (fmterror == BULKSTAT_RV_GIVEUP) { - ubleft = 0; + error = formatter(mp, XFS_AGINO_TO_INO(mp, agno, agino), + *ubufp, acp->ac_ubleft, &ubused, &fmterror); + + if (fmterror == BULKSTAT_RV_GIVEUP || + (error && error != -ENOENT && error != -EINVAL)) { + acp->ac_ubleft = 0; ASSERT(error); break; } - if (*ubufp) - *ubufp += ubused; - ubleft -= ubused; - ubelem++; - lastino = ino; + + /* be careful not to leak error if at end of chunk */ + if (fmterror == BULKSTAT_RV_NOTHING || error) { + error = 0; + continue; + } + + *ubufp += ubused; + acp->ac_ubleft -= ubused; + acp->ac_ubelem++; } - acp->ac_lastino = lastino; - acp->ac_ubleft = ubleft; - acp->ac_ubelem = ubelem; + /* + * Post-update *last_agino. At this point, agino will always point one + * inode past the last inode we processed successfully. Hence we + * substract that inode when setting the *last_agino cursor so that we + * return the correct cookie to userspace. On the next bulkstat call, + * the inode under the lastino cookie will be skipped as we have already + * processed it here. + */ + *last_agino = agino - 1; return error; } @@ -353,45 +356,33 @@ xfs_bulkstat( xfs_agino_t agino; /* inode # in allocation group */ xfs_agnumber_t agno; /* allocation group number */ xfs_btree_cur_t *cur; /* btree cursor for ialloc btree */ - int end_of_ag; /* set if we've seen the ag end */ - int error; /* error code */ - int fmterror;/* bulkstat formatter result */ - int i; /* loop index */ - int icount; /* count of inodes good in irbuf */ size_t irbsize; /* size of irec buffer in bytes */ - xfs_ino_t ino; /* inode number (filesystem) */ - xfs_inobt_rec_incore_t *irbp; /* current irec buffer pointer */ xfs_inobt_rec_incore_t *irbuf; /* start of irec buffer */ - xfs_inobt_rec_incore_t *irbufend; /* end of good irec buffer entries */ - xfs_ino_t lastino; /* last inode number returned */ int nirbuf; /* size of irbuf */ - int rval; /* return value error code */ - int tmp; /* result value from btree calls */ int ubcount; /* size of user's buffer */ - int ubleft; /* bytes left in user's buffer */ - char __user *ubufp; /* pointer into user's buffer */ - int ubelem; /* spaces used in user's buffer */ + struct xfs_bulkstat_agichunk ac; + int error = 0; /* * Get the last inode value, see if there's nothing to do. */ - ino = (xfs_ino_t)*lastinop; - lastino = ino; - agno = XFS_INO_TO_AGNO(mp, ino); - agino = XFS_INO_TO_AGINO(mp, ino); + agno = XFS_INO_TO_AGNO(mp, *lastinop); + agino = XFS_INO_TO_AGINO(mp, *lastinop); if (agno >= mp->m_sb.sb_agcount || - ino != XFS_AGINO_TO_INO(mp, agno, agino)) { + *lastinop != XFS_AGINO_TO_INO(mp, agno, agino)) { *done = 1; *ubcountp = 0; return 0; } ubcount = *ubcountp; /* statstruct's */ - ubleft = ubcount * statstruct_size; /* bytes */ - *ubcountp = ubelem = 0; + ac.ac_ubuffer = &ubuffer; + ac.ac_ubleft = ubcount * statstruct_size; /* bytes */; + ac.ac_ubelem = 0; + + *ubcountp = 0; *done = 0; - fmterror = 0; - ubufp = ubuffer; + irbuf = kmem_zalloc_greedy(&irbsize, PAGE_SIZE, PAGE_SIZE * 4); if (!irbuf) return -ENOMEM; @@ -402,9 +393,13 @@ xfs_bulkstat( * Loop over the allocation groups, starting from the last * inode returned; 0 means start of the allocation group. */ - rval = 0; - while (XFS_BULKSTAT_UBLEFT(ubleft) && agno < mp->m_sb.sb_agcount) { - cond_resched(); + while (agno < mp->m_sb.sb_agcount) { + struct xfs_inobt_rec_incore *irbp = irbuf; + struct xfs_inobt_rec_incore *irbufend = irbuf + nirbuf; + bool end_of_ag = false; + int icount = 0; + int stat; + error = xfs_ialloc_read_agi(mp, NULL, agno, &agbp); if (error) break; @@ -414,10 +409,6 @@ xfs_bulkstat( */ cur = xfs_inobt_init_cursor(mp, NULL, agbp, agno, XFS_BTNUM_INO); - irbp = irbuf; - irbufend = irbuf + nirbuf; - end_of_ag = 0; - icount = 0; if (agino > 0) { /* * In the middle of an allocation group, we need to get @@ -427,22 +418,23 @@ xfs_bulkstat( error = xfs_bulkstat_grab_ichunk(cur, agino, &icount, &r); if (error) - break; + goto del_cursor; if (icount) { irbp->ir_startino = r.ir_startino; irbp->ir_freecount = r.ir_freecount; irbp->ir_free = r.ir_free; irbp++; - agino = r.ir_startino + XFS_INODES_PER_CHUNK; } /* Increment to the next record */ - error = xfs_btree_increment(cur, 0, &tmp); + error = xfs_btree_increment(cur, 0, &stat); } else { /* Start of ag. Lookup the first inode chunk */ - error = xfs_inobt_lookup(cur, 0, XFS_LOOKUP_GE, &tmp); + error = xfs_inobt_lookup(cur, 0, XFS_LOOKUP_GE, &stat); + } + if (error || stat == 0) { + end_of_ag = true; + goto del_cursor; } - if (error) - break; /* * Loop through inode btree records in this ag, @@ -451,10 +443,10 @@ xfs_bulkstat( while (irbp < irbufend && icount < ubcount) { struct xfs_inobt_rec_incore r; - error = xfs_inobt_get_rec(cur, &r, &i); - if (error || i == 0) { - end_of_ag = 1; - break; + error = xfs_inobt_get_rec(cur, &r, &stat); + if (error || stat == 0) { + end_of_ag = true; + goto del_cursor; } /* @@ -469,77 +461,79 @@ xfs_bulkstat( irbp++; icount += XFS_INODES_PER_CHUNK - r.ir_freecount; } - /* - * Set agino to after this chunk and bump the cursor. - */ - agino = r.ir_startino + XFS_INODES_PER_CHUNK; - error = xfs_btree_increment(cur, 0, &tmp); + error = xfs_btree_increment(cur, 0, &stat); + if (error || stat == 0) { + end_of_ag = true; + goto del_cursor; + } cond_resched(); } + /* - * Drop the btree buffers and the agi buffer. - * We can't hold any of the locks these represent - * when calling iget. + * Drop the btree buffers and the agi buffer as we can't hold any + * of the locks these represent when calling iget. If there is a + * pending error, then we are done. */ +del_cursor: xfs_btree_del_cursor(cur, XFS_BTREE_NOERROR); xfs_buf_relse(agbp); + if (error) + break; /* - * Now format all the good inodes into the user's buffer. + * Now format all the good inodes into the user's buffer. The + * call to xfs_bulkstat_ag_ichunk() sets up the agino pointer + * for the next loop iteration. */ irbufend = irbp; for (irbp = irbuf; - irbp < irbufend && XFS_BULKSTAT_UBLEFT(ubleft); irbp++) { - struct xfs_bulkstat_agichunk ac; - - ac.ac_lastino = lastino; - ac.ac_ubuffer = &ubuffer; - ac.ac_ubleft = ubleft; - ac.ac_ubelem = ubelem; + irbp < irbufend && ac.ac_ubleft >= statstruct_size; + irbp++) { error = xfs_bulkstat_ag_ichunk(mp, agno, irbp, - formatter, statstruct_size, &ac); + formatter, statstruct_size, &ac, + &agino); if (error) - rval = error; - - lastino = ac.ac_lastino; - ubleft = ac.ac_ubleft; - ubelem = ac.ac_ubelem; + break; cond_resched(); } + /* - * Set up for the next loop iteration. + * If we've run out of space or had a formatting error, we + * are now done */ - if (XFS_BULKSTAT_UBLEFT(ubleft)) { - if (end_of_ag) { - agno++; - agino = 0; - } else - agino = XFS_INO_TO_AGINO(mp, lastino); - } else + if (ac.ac_ubleft < statstruct_size || error) break; + + if (end_of_ag) { + agno++; + agino = 0; + } } /* * Done, we're either out of filesystem or space to put the data. */ kmem_free(irbuf); - *ubcountp = ubelem; + *ubcountp = ac.ac_ubelem; + /* - * Found some inodes, return them now and return the error next time. + * We found some inodes, so clear the error status and return them. + * The lastino pointer will point directly at the inode that triggered + * any error that occurred, so on the next call the error will be + * triggered again and propagated to userspace as there will be no + * formatted inodes in the buffer. */ - if (ubelem) - rval = 0; - if (agno >= mp->m_sb.sb_agcount) { - /* - * If we ran out of filesystem, mark lastino as off - * the end of the filesystem, so the next call - * will return immediately. - */ - *lastinop = (xfs_ino_t)XFS_AGINO_TO_INO(mp, agno, 0); + if (ac.ac_ubelem) + error = 0; + + /* + * If we ran out of filesystem, lastino will point off the end of + * the filesystem so the next call will return immediately. + */ + *lastinop = XFS_AGINO_TO_INO(mp, agno, agino); + if (agno >= mp->m_sb.sb_agcount) *done = 1; - } else - *lastinop = (xfs_ino_t)lastino; - return rval; + return error; } int diff --git a/fs/xfs/xfs_itable.h b/fs/xfs/xfs_itable.h index aaed080..6ea8b39 100644 --- a/fs/xfs/xfs_itable.h +++ b/fs/xfs/xfs_itable.h @@ -30,22 +30,6 @@ typedef int (*bulkstat_one_pf)(struct xfs_mount *mp, int *ubused, int *stat); -struct xfs_bulkstat_agichunk { - xfs_ino_t ac_lastino; /* last inode returned */ - char __user **ac_ubuffer;/* pointer into user's buffer */ - int ac_ubleft; /* bytes left in user's buffer */ - int ac_ubelem; /* spaces used in user's buffer */ -}; - -int -xfs_bulkstat_ag_ichunk( - struct xfs_mount *mp, - xfs_agnumber_t agno, - struct xfs_inobt_rec_incore *irbp, - bulkstat_one_pf formatter, - size_t statstruct_size, - struct xfs_bulkstat_agichunk *acp); - /* * Values for stat return value. */ diff --git a/include/dt-bindings/clock/vf610-clock.h b/include/dt-bindings/clock/vf610-clock.h index d6b56b2..801c0ac 100644 --- a/include/dt-bindings/clock/vf610-clock.h +++ b/include/dt-bindings/clock/vf610-clock.h @@ -21,24 +21,24 @@ #define VF610_CLK_FASK_CLK_SEL 8 #define VF610_CLK_AUDIO_EXT 9 #define VF610_CLK_ENET_EXT 10 -#define VF610_CLK_PLL1_MAIN 11 +#define VF610_CLK_PLL1_SYS 11 #define VF610_CLK_PLL1_PFD1 12 #define VF610_CLK_PLL1_PFD2 13 #define VF610_CLK_PLL1_PFD3 14 #define VF610_CLK_PLL1_PFD4 15 -#define VF610_CLK_PLL2_MAIN 16 +#define VF610_CLK_PLL2_BUS 16 #define VF610_CLK_PLL2_PFD1 17 #define VF610_CLK_PLL2_PFD2 18 #define VF610_CLK_PLL2_PFD3 19 #define VF610_CLK_PLL2_PFD4 20 -#define VF610_CLK_PLL3_MAIN 21 +#define VF610_CLK_PLL3_USB_OTG 21 #define VF610_CLK_PLL3_PFD1 22 #define VF610_CLK_PLL3_PFD2 23 #define VF610_CLK_PLL3_PFD3 24 #define VF610_CLK_PLL3_PFD4 25 -#define VF610_CLK_PLL4_MAIN 26 -#define VF610_CLK_PLL5_MAIN 27 -#define VF610_CLK_PLL6_MAIN 28 +#define VF610_CLK_PLL4_AUDIO 26 +#define VF610_CLK_PLL5_ENET 27 +#define VF610_CLK_PLL6_VIDEO 28 #define VF610_CLK_PLL3_MAIN_DIV 29 #define VF610_CLK_PLL4_MAIN_DIV 30 #define VF610_CLK_PLL6_MAIN_DIV 31 @@ -166,9 +166,32 @@ #define VF610_CLK_DMAMUX3 153 #define VF610_CLK_FLEXCAN0_EN 154 #define VF610_CLK_FLEXCAN1_EN 155 -#define VF610_CLK_PLL7_MAIN 156 +#define VF610_CLK_PLL7_USB_HOST 156 #define VF610_CLK_USBPHY0 157 #define VF610_CLK_USBPHY1 158 -#define VF610_CLK_END 159 +#define VF610_CLK_LVDS1_IN 159 +#define VF610_CLK_ANACLK1 160 +#define VF610_CLK_PLL1_BYPASS_SRC 161 +#define VF610_CLK_PLL2_BYPASS_SRC 162 +#define VF610_CLK_PLL3_BYPASS_SRC 163 +#define VF610_CLK_PLL4_BYPASS_SRC 164 +#define VF610_CLK_PLL5_BYPASS_SRC 165 +#define VF610_CLK_PLL6_BYPASS_SRC 166 +#define VF610_CLK_PLL7_BYPASS_SRC 167 +#define VF610_CLK_PLL1 168 +#define VF610_CLK_PLL2 169 +#define VF610_CLK_PLL3 170 +#define VF610_CLK_PLL4 171 +#define VF610_CLK_PLL5 172 +#define VF610_CLK_PLL6 173 +#define VF610_CLK_PLL7 174 +#define VF610_PLL1_BYPASS 175 +#define VF610_PLL2_BYPASS 176 +#define VF610_PLL3_BYPASS 177 +#define VF610_PLL4_BYPASS 178 +#define VF610_PLL5_BYPASS 179 +#define VF610_PLL6_BYPASS 180 +#define VF610_PLL7_BYPASS 181 +#define VF610_CLK_END 182 #endif /* __DT_BINDINGS_CLOCK_VF610_H */ diff --git a/include/linux/cma.h b/include/linux/cma.h index 0430ed0..a93438b 100644 --- a/include/linux/cma.h +++ b/include/linux/cma.h @@ -18,12 +18,12 @@ struct cma; extern phys_addr_t cma_get_base(struct cma *cma); extern unsigned long cma_get_size(struct cma *cma); -extern int __init cma_declare_contiguous(phys_addr_t size, - phys_addr_t base, phys_addr_t limit, +extern int __init cma_declare_contiguous(phys_addr_t base, + phys_addr_t size, phys_addr_t limit, phys_addr_t alignment, unsigned int order_per_bit, bool fixed, struct cma **res_cma); -extern int cma_init_reserved_mem(phys_addr_t size, - phys_addr_t base, int order_per_bit, +extern int cma_init_reserved_mem(phys_addr_t base, + phys_addr_t size, int order_per_bit, struct cma **res_cma); extern struct page *cma_alloc(struct cma *cma, int count, unsigned int align); extern bool cma_release(struct cma *cma, struct page *pages, int count); diff --git a/include/linux/of.h b/include/linux/of.h index 6545e7a..29f0adc 100644 --- a/include/linux/of.h +++ b/include/linux/of.h @@ -267,14 +267,12 @@ extern int of_property_read_u64(const struct device_node *np, extern int of_property_read_string(struct device_node *np, const char *propname, const char **out_string); -extern int of_property_read_string_index(struct device_node *np, - const char *propname, - int index, const char **output); extern int of_property_match_string(struct device_node *np, const char *propname, const char *string); -extern int of_property_count_strings(struct device_node *np, - const char *propname); +extern int of_property_read_string_helper(struct device_node *np, + const char *propname, + const char **out_strs, size_t sz, int index); extern int of_device_is_compatible(const struct device_node *device, const char *); extern int of_device_is_available(const struct device_node *device); @@ -486,15 +484,9 @@ static inline int of_property_read_string(struct device_node *np, return -ENOSYS; } -static inline int of_property_read_string_index(struct device_node *np, - const char *propname, int index, - const char **out_string) -{ - return -ENOSYS; -} - -static inline int of_property_count_strings(struct device_node *np, - const char *propname) +static inline int of_property_read_string_helper(struct device_node *np, + const char *propname, + const char **out_strs, size_t sz, int index) { return -ENOSYS; } @@ -668,6 +660,70 @@ static inline int of_property_count_u64_elems(const struct device_node *np, } /** + * of_property_read_string_array() - Read an array of strings from a multiple + * strings property. + * @np: device node from which the property value is to be read. + * @propname: name of the property to be searched. + * @out_strs: output array of string pointers. + * @sz: number of array elements to read. + * + * Search for a property in a device tree node and retrieve a list of + * terminated string values (pointer to data, not a copy) in that property. + * + * If @out_strs is NULL, the number of strings in the property is returned. + */ +static inline int of_property_read_string_array(struct device_node *np, + const char *propname, const char **out_strs, + size_t sz) +{ + return of_property_read_string_helper(np, propname, out_strs, sz, 0); +} + +/** + * of_property_count_strings() - Find and return the number of strings from a + * multiple strings property. + * @np: device node from which the property value is to be read. + * @propname: name of the property to be searched. + * + * Search for a property in a device tree node and retrieve the number of null + * terminated string contain in it. Returns the number of strings on + * success, -EINVAL if the property does not exist, -ENODATA if property + * does not have a value, and -EILSEQ if the string is not null-terminated + * within the length of the property data. + */ +static inline int of_property_count_strings(struct device_node *np, + const char *propname) +{ + return of_property_read_string_helper(np, propname, NULL, 0, 0); +} + +/** + * of_property_read_string_index() - Find and read a string from a multiple + * strings property. + * @np: device node from which the property value is to be read. + * @propname: name of the property to be searched. + * @index: index of the string in the list of strings + * @out_string: pointer to null terminated return string, modified only if + * return value is 0. + * + * Search for a property in a device tree node and retrieve a null + * terminated string value (pointer to data, not a copy) in the list of strings + * contained in that property. + * Returns 0 on success, -EINVAL if the property does not exist, -ENODATA if + * property does not have a value, and -EILSEQ if the string is not + * null-terminated within the length of the property data. + * + * The out_string pointer is modified only if a valid string can be decoded. + */ +static inline int of_property_read_string_index(struct device_node *np, + const char *propname, + int index, const char **output) +{ + int rc = of_property_read_string_helper(np, propname, output, 1, index); + return rc < 0 ? rc : 0; +} + +/** * of_property_read_bool - Findfrom a property * @np: device node from which the property value is to be read. * @propname: name of the property to be searched. diff --git a/include/linux/pci-acpi.h b/include/linux/pci-acpi.h index 64dacb7..24c7728 100644 --- a/include/linux/pci-acpi.h +++ b/include/linux/pci-acpi.h @@ -41,8 +41,13 @@ static inline acpi_handle acpi_pci_get_bridge_handle(struct pci_bus *pbus) if (pci_is_root_bus(pbus)) dev = pbus->bridge; - else + else { + /* If pbus is a virtual bus, there is no bridge to it */ + if (!pbus->self) + return NULL; + dev = &pbus->self->dev; + } return ACPI_HANDLE(dev); } diff --git a/include/linux/usb/ehci-dbgp.h b/include/linux/usb/ehci-dbgp.h new file mode 100644 index 0000000..7344d9e --- /dev/null +++ b/include/linux/usb/ehci-dbgp.h @@ -0,0 +1,83 @@ +/* + * Standalone EHCI usb debug driver + * + * Originally written by: + * Eric W. Biederman" <ebiederm@xmission.com> and + * Yinghai Lu <yhlu.kernel@gmail.com> + * + * Changes for early/late printk and HW errata: + * Jason Wessel <jason.wessel@windriver.com> + * Copyright (C) 2009 Wind River Systems, Inc. + * + */ + +#ifndef __LINUX_USB_EHCI_DBGP_H +#define __LINUX_USB_EHCI_DBGP_H + +#include <linux/console.h> +#include <linux/types.h> + +/* Appendix C, Debug port ... intended for use with special "debug devices" + * that can help if there's no serial console. (nonstandard enumeration.) + */ +struct ehci_dbg_port { + u32 control; +#define DBGP_OWNER (1<<30) +#define DBGP_ENABLED (1<<28) +#define DBGP_DONE (1<<16) +#define DBGP_INUSE (1<<10) +#define DBGP_ERRCODE(x) (((x)>>7)&0x07) +# define DBGP_ERR_BAD 1 +# define DBGP_ERR_SIGNAL 2 +#define DBGP_ERROR (1<<6) +#define DBGP_GO (1<<5) +#define DBGP_OUT (1<<4) +#define DBGP_LEN(x) (((x)>>0)&0x0f) + u32 pids; +#define DBGP_PID_GET(x) (((x)>>16)&0xff) +#define DBGP_PID_SET(data, tok) (((data)<<8)|(tok)) + u32 data03; + u32 data47; + u32 address; +#define DBGP_EPADDR(dev, ep) (((dev)<<8)|(ep)) +}; + +#ifdef CONFIG_EARLY_PRINTK_DBGP +extern int early_dbgp_init(char *s); +extern struct console early_dbgp_console; +#endif /* CONFIG_EARLY_PRINTK_DBGP */ + +struct usb_hcd; + +#ifdef CONFIG_XEN_DOM0 +extern int xen_dbgp_reset_prep(struct usb_hcd *); +extern int xen_dbgp_external_startup(struct usb_hcd *); +#else +static inline int xen_dbgp_reset_prep(struct usb_hcd *hcd) +{ + return 1; /* Shouldn't this be 0? */ +} + +static inline int xen_dbgp_external_startup(struct usb_hcd *hcd) +{ + return -1; +} +#endif + +#ifdef CONFIG_EARLY_PRINTK_DBGP +/* Call backs from ehci host driver to ehci debug driver */ +extern int dbgp_external_startup(struct usb_hcd *); +extern int dbgp_reset_prep(struct usb_hcd *); +#else +static inline int dbgp_reset_prep(struct usb_hcd *hcd) +{ + return xen_dbgp_reset_prep(hcd); +} + +static inline int dbgp_external_startup(struct usb_hcd *hcd) +{ + return xen_dbgp_external_startup(hcd); +} +#endif + +#endif /* __LINUX_USB_EHCI_DBGP_H */ diff --git a/include/linux/usb/ehci_def.h b/include/linux/usb/ehci_def.h index daec99a..966889a 100644 --- a/include/linux/usb/ehci_def.h +++ b/include/linux/usb/ehci_def.h @@ -19,6 +19,8 @@ #ifndef __LINUX_USB_EHCI_DEF_H #define __LINUX_USB_EHCI_DEF_H +#include <linux/usb/ehci-dbgp.h> + /* EHCI register interface, corresponds to EHCI Revision 0.95 specification */ /* Section 2.2 Host Controller Capability Registers */ @@ -190,67 +192,4 @@ struct ehci_regs { #define USBMODE_EX_HC (3<<0) /* host controller mode */ }; -/* Appendix C, Debug port ... intended for use with special "debug devices" - * that can help if there's no serial console. (nonstandard enumeration.) - */ -struct ehci_dbg_port { - u32 control; -#define DBGP_OWNER (1<<30) -#define DBGP_ENABLED (1<<28) -#define DBGP_DONE (1<<16) -#define DBGP_INUSE (1<<10) -#define DBGP_ERRCODE(x) (((x)>>7)&0x07) -# define DBGP_ERR_BAD 1 -# define DBGP_ERR_SIGNAL 2 -#define DBGP_ERROR (1<<6) -#define DBGP_GO (1<<5) -#define DBGP_OUT (1<<4) -#define DBGP_LEN(x) (((x)>>0)&0x0f) - u32 pids; -#define DBGP_PID_GET(x) (((x)>>16)&0xff) -#define DBGP_PID_SET(data, tok) (((data)<<8)|(tok)) - u32 data03; - u32 data47; - u32 address; -#define DBGP_EPADDR(dev, ep) (((dev)<<8)|(ep)) -}; - -#ifdef CONFIG_EARLY_PRINTK_DBGP -#include <linux/init.h> -extern int __init early_dbgp_init(char *s); -extern struct console early_dbgp_console; -#endif /* CONFIG_EARLY_PRINTK_DBGP */ - -struct usb_hcd; - -#ifdef CONFIG_XEN_DOM0 -extern int xen_dbgp_reset_prep(struct usb_hcd *); -extern int xen_dbgp_external_startup(struct usb_hcd *); -#else -static inline int xen_dbgp_reset_prep(struct usb_hcd *hcd) -{ - return 1; /* Shouldn't this be 0? */ -} - -static inline int xen_dbgp_external_startup(struct usb_hcd *hcd) -{ - return -1; -} -#endif - -#ifdef CONFIG_EARLY_PRINTK_DBGP -/* Call backs from ehci host driver to ehci debug driver */ -extern int dbgp_external_startup(struct usb_hcd *); -extern int dbgp_reset_prep(struct usb_hcd *hcd); -#else -static inline int dbgp_reset_prep(struct usb_hcd *hcd) -{ - return xen_dbgp_reset_prep(hcd); -} -static inline int dbgp_external_startup(struct usb_hcd *hcd) -{ - return xen_dbgp_external_startup(hcd); -} -#endif - #endif /* __LINUX_USB_EHCI_DEF_H */ diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h index cd96a2b..9cf7e35 100644 --- a/include/linux/usb/hcd.h +++ b/include/linux/usb/hcd.h @@ -379,6 +379,9 @@ struct hc_driver { int (*disable_usb3_lpm_timeout)(struct usb_hcd *, struct usb_device *, enum usb3_link_state state); int (*find_raw_port_number)(struct usb_hcd *, int); + /* Call for power on/off the port if necessary */ + int (*port_power)(struct usb_hcd *hcd, int portnum, bool enable); + }; static inline int hcd_giveback_urb_in_bh(struct usb_hcd *hcd) @@ -124,6 +124,7 @@ static int __init cma_activate_area(struct cma *cma) err: kfree(cma->bitmap); + cma->count = 0; return -EINVAL; } @@ -217,9 +218,8 @@ int __init cma_declare_contiguous(phys_addr_t base, phys_addr_t highmem_start = __pa(high_memory); int ret = 0; - pr_debug("%s(size %lx, base %08lx, limit %08lx alignment %08lx)\n", - __func__, (unsigned long)size, (unsigned long)base, - (unsigned long)limit, (unsigned long)alignment); + pr_debug("%s(size %pa, base %pa, limit %pa alignment %pa)\n", + __func__, &size, &base, &limit, &alignment); if (cma_area_count == ARRAY_SIZE(cma_areas)) { pr_err("Not enough slots for CMA reserved regions!\n"); @@ -244,52 +244,72 @@ int __init cma_declare_contiguous(phys_addr_t base, size = ALIGN(size, alignment); limit &= ~(alignment - 1); + if (!base) + fixed = false; + /* size should be aligned with order_per_bit */ if (!IS_ALIGNED(size >> PAGE_SHIFT, 1 << order_per_bit)) return -EINVAL; /* - * adjust limit to avoid crossing low/high memory boundary for - * automatically allocated regions + * If allocating at a fixed base the request region must not cross the + * low/high memory boundary. */ - if (((limit == 0 || limit > memblock_end) && - (memblock_end - size < highmem_start && - memblock_end > highmem_start)) || - (!fixed && limit > highmem_start && limit - size < highmem_start)) { - limit = highmem_start; - } - - if (fixed && base < highmem_start && base+size > highmem_start) { + if (fixed && base < highmem_start && base + size > highmem_start) { ret = -EINVAL; - pr_err("Region at %08lx defined on low/high memory boundary (%08lx)\n", - (unsigned long)base, (unsigned long)highmem_start); + pr_err("Region at %pa defined on low/high memory boundary (%pa)\n", + &base, &highmem_start); goto err; } + /* + * If the limit is unspecified or above the memblock end, its effective + * value will be the memblock end. Set it explicitly to simplify further + * checks. + */ + if (limit == 0 || limit > memblock_end) + limit = memblock_end; + /* Reserve memory */ - if (base && fixed) { + if (fixed) { if (memblock_is_region_reserved(base, size) || memblock_reserve(base, size) < 0) { ret = -EBUSY; goto err; } } else { - phys_addr_t addr = memblock_alloc_range(size, alignment, base, - limit); + phys_addr_t addr = 0; + + /* + * All pages in the reserved area must come from the same zone. + * If the requested region crosses the low/high memory boundary, + * try allocating from high memory first and fall back to low + * memory in case of failure. + */ + if (base < highmem_start && limit > highmem_start) { + addr = memblock_alloc_range(size, alignment, + highmem_start, limit); + limit = highmem_start; + } + if (!addr) { - ret = -ENOMEM; - goto err; - } else { - base = addr; + addr = memblock_alloc_range(size, alignment, base, + limit); + if (!addr) { + ret = -ENOMEM; + goto err; + } } + + base = addr; } ret = cma_init_reserved_mem(base, size, order_per_bit, res_cma); if (ret) goto err; - pr_info("Reserved %ld MiB at %08lx\n", (unsigned long)size / SZ_1M, - (unsigned long)base); + pr_info("Reserved %ld MiB at %pa\n", (unsigned long)size / SZ_1M, + &base); return 0; err: diff --git a/mm/truncate.c b/mm/truncate.c index 261eaf6..f1e4d60 100644 --- a/mm/truncate.c +++ b/mm/truncate.c @@ -715,8 +715,9 @@ EXPORT_SYMBOL(truncate_pagecache); * necessary) to @newsize. It will be typically be called from the filesystem's * setattr function when ATTR_SIZE is passed in. * - * Must be called with inode_mutex held and before all filesystem specific - * block truncation has been performed. + * Must be called with a lock serializing truncates and writes (generally + * i_mutex but e.g. xfs uses a different lock) and before all filesystem + * specific block truncation has been performed. */ void truncate_setsize(struct inode *inode, loff_t newsize) { @@ -755,7 +756,6 @@ void pagecache_isize_extended(struct inode *inode, loff_t from, loff_t to) struct page *page; pgoff_t index; - WARN_ON(!mutex_is_locked(&inode->i_mutex)); WARN_ON(to > inode->i_size); if (from >= to || bsize == PAGE_CACHE_SIZE) diff --git a/net/ceph/auth_x.c b/net/ceph/auth_x.c index de6662b..7e38b72 100644 --- a/net/ceph/auth_x.c +++ b/net/ceph/auth_x.c @@ -149,6 +149,7 @@ static int process_one_ticket(struct ceph_auth_client *ac, struct ceph_crypto_key old_key; void *ticket_buf = NULL; void *tp, *tpend; + void **ptp; struct ceph_timespec new_validity; struct ceph_crypto_key new_session_key; struct ceph_buffer *new_ticket_blob; @@ -208,25 +209,19 @@ static int process_one_ticket(struct ceph_auth_client *ac, goto out; } tp = ticket_buf; - dlen = ceph_decode_32(&tp); + ptp = &tp; + tpend = *ptp + dlen; } else { /* unencrypted */ - ceph_decode_32_safe(p, end, dlen, bad); - ticket_buf = kmalloc(dlen, GFP_NOFS); - if (!ticket_buf) { - ret = -ENOMEM; - goto out; - } - tp = ticket_buf; - ceph_decode_need(p, end, dlen, bad); - ceph_decode_copy(p, ticket_buf, dlen); + ptp = p; + tpend = end; } - tpend = tp + dlen; + ceph_decode_32_safe(ptp, tpend, dlen, bad); dout(" ticket blob is %d bytes\n", dlen); - ceph_decode_need(&tp, tpend, 1 + sizeof(u64), bad); - blob_struct_v = ceph_decode_8(&tp); - new_secret_id = ceph_decode_64(&tp); - ret = ceph_decode_buffer(&new_ticket_blob, &tp, tpend); + ceph_decode_need(ptp, tpend, 1 + sizeof(u64), bad); + blob_struct_v = ceph_decode_8(ptp); + new_secret_id = ceph_decode_64(ptp); + ret = ceph_decode_buffer(&new_ticket_blob, ptp, tpend); if (ret) goto out; diff --git a/net/ceph/messenger.c b/net/ceph/messenger.c index 559c9f6..8d1653c 100644 --- a/net/ceph/messenger.c +++ b/net/ceph/messenger.c @@ -484,7 +484,7 @@ static int ceph_tcp_connect(struct ceph_connection *con) IPPROTO_TCP, &sock); if (ret) return ret; - sock->sk->sk_allocation = GFP_NOFS; + sock->sk->sk_allocation = GFP_NOFS | __GFP_MEMALLOC; #ifdef CONFIG_LOCKDEP lockdep_set_class(&sock->sk->sk_lock, &socket_class); @@ -509,6 +509,9 @@ static int ceph_tcp_connect(struct ceph_connection *con) return ret; } + + sk_set_memalloc(sock->sk); + con->sock = sock; return 0; } @@ -2769,8 +2772,11 @@ static void con_work(struct work_struct *work) { struct ceph_connection *con = container_of(work, struct ceph_connection, work.work); + unsigned long pflags = current->flags; bool fault; + current->flags |= PF_MEMALLOC; + mutex_lock(&con->mutex); while (true) { int ret; @@ -2824,6 +2830,8 @@ static void con_work(struct work_struct *work) con_fault_finish(con); con->ops->put(con); + + tsk_restore_flags(current, pflags, PF_MEMALLOC); } /* diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index c9cf248..da03693 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -291,18 +291,14 @@ static void alc880_unsol_event(struct hda_codec *codec, unsigned int res) /* additional initialization for ALC888 variants */ static void alc888_coef_init(struct hda_codec *codec) { - if (alc_get_coef0(codec) == 0x20) - /* alc888S-VC */ - alc_write_coef_idx(codec, 7, 0x830); - else - /* alc888-VB */ - alc_write_coef_idx(codec, 7, 0x3030); -} - -/* additional initialization for ALC889 variants */ -static void alc889_coef_init(struct hda_codec *codec) -{ - alc_update_coef_idx(codec, 7, 0, 0x2010); + switch (alc_get_coef0(codec) & 0x00f0) { + /* alc888-VA */ + case 0x00: + /* alc888-VB */ + case 0x10: + alc_update_coef_idx(codec, 7, 0, 0x2030); /* Turn EAPD to High */ + break; + } } /* turn on/off EAPD control (only if available) */ @@ -359,25 +355,15 @@ static void alc_auto_init_amp(struct hda_codec *codec, int type) case 0x10ec0260: alc_update_coefex_idx(codec, 0x1a, 7, 0, 0x2010); break; - case 0x10ec0262: case 0x10ec0880: case 0x10ec0882: case 0x10ec0883: case 0x10ec0885: - case 0x10ec0887: - /*case 0x10ec0889:*/ /* this causes an SPDIF problem */ - case 0x10ec0900: - alc889_coef_init(codec); + alc_update_coef_idx(codec, 7, 0, 0x2030); break; case 0x10ec0888: alc888_coef_init(codec); break; -#if 0 /* XXX: This may cause the silent output on speaker on some machines */ - case 0x10ec0267: - case 0x10ec0268: - alc_update_coef_idx(codec, 7, 0, 0x3000); - break; -#endif /* XXX */ } break; } @@ -1710,7 +1696,7 @@ static void alc889_fixup_coef(struct hda_codec *codec, { if (action != HDA_FIXUP_ACT_INIT) return; - alc889_coef_init(codec); + alc_update_coef_idx(codec, 7, 0, 0x2030); } /* toggle speaker-output according to the hp-jack state */ @@ -3350,6 +3336,27 @@ static void alc269_fixup_hp_gpio_mic1_led(struct hda_codec *codec, } } +static void alc280_fixup_hp_gpio4(struct hda_codec *codec, + const struct hda_fixup *fix, int action) +{ + /* Like hp_gpio_mic1_led, but also needs GPIO4 low to enable headphone amp */ + struct alc_spec *spec = codec->spec; + static const struct hda_verb gpio_init[] = { + { 0x01, AC_VERB_SET_GPIO_MASK, 0x18 }, + { 0x01, AC_VERB_SET_GPIO_DIRECTION, 0x18 }, + {} + }; + + if (action == HDA_FIXUP_ACT_PRE_PROBE) { + spec->gen.vmaster_mute.hook = alc269_fixup_hp_gpio_mute_hook; + spec->gen.cap_sync_hook = alc269_fixup_hp_cap_mic_mute_hook; + spec->gpio_led = 0; + spec->cap_mute_led_nid = 0x18; + snd_hda_add_verbs(codec, gpio_init); + codec->power_filter = led_power_filter; + } +} + static void alc269_fixup_hp_line1_mic1_led(struct hda_codec *codec, const struct hda_fixup *fix, int action) { @@ -4217,6 +4224,7 @@ enum { ALC283_FIXUP_BXBT2807_MIC, ALC255_FIXUP_DELL_WMI_MIC_MUTE_LED, ALC282_FIXUP_ASPIRE_V5_PINS, + ALC280_FIXUP_HP_GPIO4, }; static const struct hda_fixup alc269_fixups[] = { @@ -4680,7 +4688,10 @@ static const struct hda_fixup alc269_fixups[] = { { }, }, }, - + [ALC280_FIXUP_HP_GPIO4] = { + .type = HDA_FIXUP_FUNC, + .v.func = alc280_fixup_hp_gpio4, + }, }; static const struct snd_pci_quirk alc269_fixup_tbl[] = { @@ -4728,21 +4739,16 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x103c, 0x22cf, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1), SND_PCI_QUIRK(0x103c, 0x22dc, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED), SND_PCI_QUIRK(0x103c, 0x22fb, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED), - SND_PCI_QUIRK(0x103c, 0x8004, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED), /* ALC290 */ SND_PCI_QUIRK(0x103c, 0x221b, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED), SND_PCI_QUIRK(0x103c, 0x2221, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED), SND_PCI_QUIRK(0x103c, 0x2225, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED), SND_PCI_QUIRK(0x103c, 0x2246, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED), - SND_PCI_QUIRK(0x103c, 0x2247, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED), - SND_PCI_QUIRK(0x103c, 0x2248, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED), - SND_PCI_QUIRK(0x103c, 0x2249, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED), SND_PCI_QUIRK(0x103c, 0x2253, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED), SND_PCI_QUIRK(0x103c, 0x2254, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED), SND_PCI_QUIRK(0x103c, 0x2255, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED), SND_PCI_QUIRK(0x103c, 0x2256, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED), SND_PCI_QUIRK(0x103c, 0x2257, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED), - SND_PCI_QUIRK(0x103c, 0x2258, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED), SND_PCI_QUIRK(0x103c, 0x2259, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED), SND_PCI_QUIRK(0x103c, 0x225a, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED), SND_PCI_QUIRK(0x103c, 0x2260, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1), @@ -4751,7 +4757,6 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x103c, 0x2265, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1), SND_PCI_QUIRK(0x103c, 0x2272, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED), SND_PCI_QUIRK(0x103c, 0x2273, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED), - SND_PCI_QUIRK(0x103c, 0x2277, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED), SND_PCI_QUIRK(0x103c, 0x2278, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED), SND_PCI_QUIRK(0x103c, 0x227f, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1), SND_PCI_QUIRK(0x103c, 0x2282, "HP", ALC269_FIXUP_HP_MUTE_LED_MIC1), @@ -4804,7 +4809,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x17aa, 0x220e, "Thinkpad T440p", ALC292_FIXUP_TPT440_DOCK), SND_PCI_QUIRK(0x17aa, 0x2210, "Thinkpad T540p", ALC292_FIXUP_TPT440_DOCK), SND_PCI_QUIRK(0x17aa, 0x2212, "Thinkpad T440", ALC292_FIXUP_TPT440_DOCK), - SND_PCI_QUIRK(0x17aa, 0x2214, "Thinkpad", ALC269_FIXUP_LIMIT_INT_MIC_BOOST), + SND_PCI_QUIRK(0x17aa, 0x2214, "Thinkpad X240", ALC292_FIXUP_TPT440_DOCK), SND_PCI_QUIRK(0x17aa, 0x2215, "Thinkpad", ALC269_FIXUP_LIMIT_INT_MIC_BOOST), SND_PCI_QUIRK(0x17aa, 0x3978, "IdeaPad Y410P", ALC269_FIXUP_NO_SHUTUP), SND_PCI_QUIRK(0x17aa, 0x5013, "Thinkpad", ALC269_FIXUP_LIMIT_INT_MIC_BOOST), @@ -4984,6 +4989,19 @@ static const struct snd_hda_pin_quirk alc269_pin_fixup_tbl[] = { {0x17, 0x40000000}, {0x1d, 0x40700001}, {0x21, 0x02211040}), + SND_HDA_PIN_QUIRK(0x10ec0280, 0x103c, "HP", ALC280_FIXUP_HP_GPIO4, + {0x12, 0x90a60130}, + {0x13, 0x40000000}, + {0x14, 0x90170110}, + {0x15, 0x0421101f}, + {0x16, 0x411111f0}, + {0x17, 0x411111f0}, + {0x18, 0x411111f0}, + {0x19, 0x411111f0}, + {0x1a, 0x04a11020}, + {0x1b, 0x411111f0}, + {0x1d, 0x40748605}, + {0x1e, 0x411111f0}), SND_HDA_PIN_QUIRK(0x10ec0280, 0x103c, "HP", ALC269_FIXUP_HP_GPIO_MIC1_LED, {0x12, 0x90a60140}, {0x13, 0x40000000}, @@ -5651,6 +5669,35 @@ static void alc662_fixup_led_gpio1(struct hda_codec *codec, } } +static struct coef_fw alc668_coefs[] = { + WRITE_COEF(0x01, 0xbebe), WRITE_COEF(0x02, 0xaaaa), WRITE_COEF(0x03, 0x0), + WRITE_COEF(0x04, 0x0180), WRITE_COEF(0x06, 0x0), WRITE_COEF(0x07, 0x0f80), + WRITE_COEF(0x08, 0x0031), WRITE_COEF(0x0a, 0x0060), WRITE_COEF(0x0b, 0x0), + WRITE_COEF(0x0c, 0x7cf7), WRITE_COEF(0x0d, 0x1080), WRITE_COEF(0x0e, 0x7f7f), + WRITE_COEF(0x0f, 0xcccc), WRITE_COEF(0x10, 0xddcc), WRITE_COEF(0x11, 0x0001), + WRITE_COEF(0x13, 0x0), WRITE_COEF(0x14, 0x2aa0), WRITE_COEF(0x17, 0xa940), + WRITE_COEF(0x19, 0x0), WRITE_COEF(0x1a, 0x0), WRITE_COEF(0x1b, 0x0), + WRITE_COEF(0x1c, 0x0), WRITE_COEF(0x1d, 0x0), WRITE_COEF(0x1e, 0x7418), + WRITE_COEF(0x1f, 0x0804), WRITE_COEF(0x20, 0x4200), WRITE_COEF(0x21, 0x0468), + WRITE_COEF(0x22, 0x8ccc), WRITE_COEF(0x23, 0x0250), WRITE_COEF(0x24, 0x7418), + WRITE_COEF(0x27, 0x0), WRITE_COEF(0x28, 0x8ccc), WRITE_COEF(0x2a, 0xff00), + WRITE_COEF(0x2b, 0x8000), WRITE_COEF(0xa7, 0xff00), WRITE_COEF(0xa8, 0x8000), + WRITE_COEF(0xaa, 0x2e17), WRITE_COEF(0xab, 0xa0c0), WRITE_COEF(0xac, 0x0), + WRITE_COEF(0xad, 0x0), WRITE_COEF(0xae, 0x2ac6), WRITE_COEF(0xaf, 0xa480), + WRITE_COEF(0xb0, 0x0), WRITE_COEF(0xb1, 0x0), WRITE_COEF(0xb2, 0x0), + WRITE_COEF(0xb3, 0x0), WRITE_COEF(0xb4, 0x0), WRITE_COEF(0xb5, 0x1040), + WRITE_COEF(0xb6, 0xd697), WRITE_COEF(0xb7, 0x902b), WRITE_COEF(0xb8, 0xd697), + WRITE_COEF(0xb9, 0x902b), WRITE_COEF(0xba, 0xb8ba), WRITE_COEF(0xbb, 0xaaab), + WRITE_COEF(0xbc, 0xaaaf), WRITE_COEF(0xbd, 0x6aaa), WRITE_COEF(0xbe, 0x1c02), + WRITE_COEF(0xc0, 0x00ff), WRITE_COEF(0xc1, 0x0fa6), + {} +}; + +static void alc668_restore_default_value(struct hda_codec *codec) +{ + alc_process_coef_fw(codec, alc668_coefs); +} + enum { ALC662_FIXUP_ASPIRE, ALC662_FIXUP_LED_GPIO1, @@ -6118,8 +6165,15 @@ static int patch_alc662(struct hda_codec *codec) alc_fix_pll_init(codec, 0x20, 0x04, 15); - spec->init_hook = alc662_fill_coef; - alc662_fill_coef(codec); + switch (codec->vendor_id) { + case 0x10ec0668: + spec->init_hook = alc668_restore_default_value; + break; + default: + spec->init_hook = alc662_fill_coef; + alc662_fill_coef(codec); + break; + } snd_hda_pick_fixup(codec, alc662_fixup_models, alc662_fixup_tbl, alc662_fixups); diff --git a/sound/usb/card.c b/sound/usb/card.c index 7ecd0e8..f61ebb1 100644 --- a/sound/usb/card.c +++ b/sound/usb/card.c @@ -591,18 +591,19 @@ static void snd_usb_audio_disconnect(struct usb_device *dev, { struct snd_card *card; struct list_head *p; + bool was_shutdown; if (chip == (void *)-1L) return; card = chip->card; down_write(&chip->shutdown_rwsem); + was_shutdown = chip->shutdown; chip->shutdown = 1; up_write(&chip->shutdown_rwsem); mutex_lock(®ister_mutex); - chip->num_interfaces--; - if (chip->num_interfaces <= 0) { + if (!was_shutdown) { struct snd_usb_endpoint *ep; snd_card_disconnect(card); @@ -622,6 +623,10 @@ static void snd_usb_audio_disconnect(struct usb_device *dev, list_for_each(p, &chip->mixer_list) { snd_usb_mixer_disconnect(p); } + } + + chip->num_interfaces--; + if (chip->num_interfaces <= 0) { usb_chip[chip->index] = NULL; mutex_unlock(®ister_mutex); snd_card_free_when_closed(card); diff --git a/tools/testing/selftests/ftrace/ftracetest b/tools/testing/selftests/ftrace/ftracetest index a8f81c7..5152476 100755 --- a/tools/testing/selftests/ftrace/ftracetest +++ b/tools/testing/selftests/ftrace/ftracetest @@ -82,7 +82,7 @@ parse_opts() { # opts } # Parameters -DEBUGFS_DIR=`grep debugfs /proc/mounts | cut -f2 -d' '` +DEBUGFS_DIR=`grep debugfs /proc/mounts | cut -f2 -d' ' | head -1` TRACING_DIR=$DEBUGFS_DIR/tracing TOP_DIR=`absdir $0` TEST_DIR=$TOP_DIR/test.d |