diff options
156 files changed, 9148 insertions, 2183 deletions
diff --git a/Documentation/devicetree/bindings/phy/apm-xgene-phy.txt b/Documentation/devicetree/bindings/phy/apm-xgene-phy.txt new file mode 100644 index 0000000..5f3a65a --- /dev/null +++ b/Documentation/devicetree/bindings/phy/apm-xgene-phy.txt @@ -0,0 +1,79 @@ +* APM X-Gene 15Gbps Multi-purpose PHY nodes + +PHY nodes are defined to describe on-chip 15Gbps Multi-purpose PHY. Each +PHY (pair of lanes) has its own node. + +Required properties: +- compatible : Shall be "apm,xgene-phy". +- reg : PHY memory resource is the SDS PHY access resource. +- #phy-cells : Shall be 1 as it expects one argument for setting + the mode of the PHY. Possible values are 0 (SATA), + 1 (SGMII), 2 (PCIe), 3 (USB), and 4 (XFI). + +Optional properties: +- status : Shall be "ok" if enabled or "disabled" if disabled. + Default is "ok". +- clocks : Reference to the clock entry. +- apm,tx-eye-tuning : Manual control to fine tune the capture of the serial + bit lines from the automatic calibrated position. + Two set of 3-tuple setting for each (up to 3) + supported link speed on the host. Range from 0 to + 127 in unit of one bit period. Default is 10. +- apm,tx-eye-direction : Eye tuning manual control direction. 0 means sample + data earlier than the nominal sampling point. 1 means + sample data later than the nominal sampling point. + Two set of 3-tuple setting for each (up to 3) + supported link speed on the host. Default is 0. +- apm,tx-boost-gain : Frequency boost AC (LSB 3-bit) and DC (2-bit) + gain control. Two set of 3-tuple setting for each + (up to 3) supported link speed on the host. Range is + between 0 to 31 in unit of dB. Default is 3. +- apm,tx-amplitude : Amplitude control. Two set of 3-tuple setting for + each (up to 3) supported link speed on the host. + Range is between 0 to 199500 in unit of uV. + Default is 199500 uV. +- apm,tx-pre-cursor1 : 1st pre-cursor emphasis taps control. Two set of + 3-tuple setting for each (up to 3) supported link + speed on the host. Range is 0 to 273000 in unit of + uV. Default is 0. +- apm,tx-pre-cursor2 : 2st pre-cursor emphasis taps control. Two set of + 3-tuple setting for each (up to 3) supported link + speed on the host. Range is 0 to 127400 in unit uV. + Default is 0x0. +- apm,tx-post-cursor : Post-cursor emphasis taps control. Two set of + 3-tuple setting for Gen1, Gen2, and Gen3. Range is + between 0 to 0x1f in unit of 18.2mV. Default is 0xf. +- apm,tx-speed : Tx operating speed. One set of 3-tuple for each + supported link speed on the host. + 0 = 1-2Gbps + 1 = 2-4Gbps (1st tuple default) + 2 = 4-8Gbps + 3 = 8-15Gbps (2nd tuple default) + 4 = 2.5-4Gbps + 5 = 4-5Gbps + 6 = 5-6Gbps + 7 = 6-16Gbps (3rd tuple default) + +NOTE: PHY override parameters are board specific setting. + +Example: + phy1: phy@1f21a000 { + compatible = "apm,xgene-phy"; + reg = <0x0 0x1f21a000 0x0 0x100>; + #phy-cells = <1>; + status = "disabled"; + }; + + phy2: phy@1f22a000 { + compatible = "apm,xgene-phy"; + reg = <0x0 0x1f22a000 0x0 0x100>; + #phy-cells = <1>; + status = "ok"; + }; + + phy3: phy@1f23a000 { + compatible = "apm,xgene-phy"; + reg = <0x0 0x1f23a000 0x0 0x100>; + #phy-cells = <1>; + status = "ok"; + }; diff --git a/Documentation/devicetree/bindings/phy/samsung-phy.txt b/Documentation/devicetree/bindings/phy/samsung-phy.txt index c0fccaa..28f9edb 100644 --- a/Documentation/devicetree/bindings/phy/samsung-phy.txt +++ b/Documentation/devicetree/bindings/phy/samsung-phy.txt @@ -20,3 +20,57 @@ Required properties: - compatible : should be "samsung,exynos5250-dp-video-phy"; - reg : offset and length of the Display Port PHY register set; - #phy-cells : from the generic PHY bindings, must be 0; + +Samsung S5P/EXYNOS SoC series USB PHY +------------------------------------------------- + +Required properties: +- compatible : should be one of the listed compatibles: + - "samsung,exynos4210-usb2-phy" + - "samsung,exynos4x12-usb2-phy" + - "samsung,exynos5250-usb2-phy" +- reg : a list of registers used by phy driver + - first and obligatory is the location of phy modules registers +- samsung,sysreg-phandle - handle to syscon used to control the system registers +- samsung,pmureg-phandle - handle to syscon used to control PMU registers +- #phy-cells : from the generic phy bindings, must be 1; +- clocks and clock-names: + - the "phy" clock is required by the phy module, used as a gate + - the "ref" clock is used to get the rate of the clock provided to the + PHY module + +The first phandle argument in the PHY specifier identifies the PHY, its +meaning is compatible dependent. For the currently supported SoCs (Exynos 4210 +and Exynos 4212) it is as follows: + 0 - USB device ("device"), + 1 - USB host ("host"), + 2 - HSIC0 ("hsic0"), + 3 - HSIC1 ("hsic1"), + +Exynos 4210 and Exynos 4212 use mode switching and require that mode switch +register is supplied. + +Example: + +For Exynos 4412 (compatible with Exynos 4212): + +usbphy: phy@125b0000 { + compatible = "samsung,exynos4x12-usb2-phy"; + reg = <0x125b0000 0x100>; + clocks = <&clock 305>, <&clock 2>; + clock-names = "phy", "ref"; + status = "okay"; + #phy-cells = <1>; + samsung,sysreg-phandle = <&sys_reg>; + samsung,pmureg-phandle = <&pmu_reg>; +}; + +Then the PHY can be used in other nodes such as: + +phy-consumer@12340000 { + phys = <&usbphy 2>; + phy-names = "phy"; +}; + +Refer to DT bindings documentation of particular PHY consumer devices for more +information about required PHYs and the way of specification. diff --git a/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt b/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt new file mode 100644 index 0000000..a82361b --- /dev/null +++ b/Documentation/devicetree/bindings/phy/sun4i-usb-phy.txt @@ -0,0 +1,26 @@ +Allwinner sun4i USB PHY +----------------------- + +Required properties: +- compatible : should be one of "allwinner,sun4i-a10-usb-phy", + "allwinner,sun5i-a13-usb-phy" or "allwinner,sun7i-a20-usb-phy" +- reg : a list of offset + length pairs +- reg-names : "phy_ctrl", "pmu1" and for sun4i or sun7i "pmu2" +- #phy-cells : from the generic phy bindings, must be 1 +- clocks : phandle + clock specifier for the phy clock +- clock-names : "usb_phy" +- resets : a list of phandle + reset specifier pairs +- reset-names : "usb0_reset", "usb1_reset" and for sun4i or sun7i "usb2_reset" + +Example: + usbphy: phy@0x01c13400 { + #phy-cells = <1>; + compatible = "allwinner,sun4i-a10-usb-phy"; + /* phy base regs, phy1 pmu reg, phy2 pmu reg */ + reg = <0x01c13400 0x10 0x01c14800 0x4 0x01c1c800 0x4>; + reg-names = "phy_ctrl", "pmu1", "pmu2"; + clocks = <&usb_clk 8>; + clock-names = "usb_phy"; + resets = <&usb_clk 1>, <&usb_clk 2>; + reset-names = "usb1_reset", "usb2_reset"; + }; diff --git a/Documentation/devicetree/bindings/phy/ti-phy.txt b/Documentation/devicetree/bindings/phy/ti-phy.txt new file mode 100644 index 0000000..788fb0f --- /dev/null +++ b/Documentation/devicetree/bindings/phy/ti-phy.txt @@ -0,0 +1,86 @@ +TI PHY: DT DOCUMENTATION FOR PHYs in TI PLATFORMs + +OMAP CONTROL PHY + +Required properties: + - compatible: Should be one of + "ti,control-phy-otghs" - if it has otghs_control mailbox register as on OMAP4. + "ti,control-phy-usb2" - if it has Power down bit in control_dev_conf register + e.g. USB2_PHY on OMAP5. + "ti,control-phy-pipe3" - if it has DPLL and individual Rx & Tx power control + e.g. USB3 PHY and SATA PHY on OMAP5. + "ti,control-phy-usb2-dra7" - if it has power down register like USB2 PHY on + DRA7 platform. + "ti,control-phy-usb2-am437" - if it has power down register like USB2 PHY on + AM437 platform. + - reg : Address and length of the register set for the device. It contains + the address of "otghs_control" for control-phy-otghs or "power" register + for other types. + - reg-names: should be "otghs_control" control-phy-otghs and "power" for + other types. + +omap_control_usb: omap-control-usb@4a002300 { + compatible = "ti,control-phy-otghs"; + reg = <0x4a00233c 0x4>; + reg-names = "otghs_control"; +}; + +OMAP USB2 PHY + +Required properties: + - compatible: Should be "ti,omap-usb2" + - reg : Address and length of the register set for the device. + - #phy-cells: determine the number of cells that should be given in the + phandle while referencing this phy. + +Optional properties: + - ctrl-module : phandle of the control module used by PHY driver to power on + the PHY. + +This is usually a subnode of ocp2scp to which it is connected. + +usb2phy@4a0ad080 { + compatible = "ti,omap-usb2"; + reg = <0x4a0ad080 0x58>; + ctrl-module = <&omap_control_usb>; + #phy-cells = <0>; +}; + +TI PIPE3 PHY + +Required properties: + - compatible: Should be "ti,phy-usb3" or "ti,phy-pipe3-sata". + "ti,omap-usb3" is deprecated. + - reg : Address and length of the register set for the device. + - reg-names: The names of the register addresses corresponding to the registers + filled in "reg". + - #phy-cells: determine the number of cells that should be given in the + phandle while referencing this phy. + - clocks: a list of phandles and clock-specifier pairs, one for each entry in + clock-names. + - clock-names: should include: + * "wkupclk" - wakeup clock. + * "sysclk" - system clock. + * "refclk" - reference clock. + +Optional properties: + - ctrl-module : phandle of the control module used by PHY driver to power on + the PHY. + +This is usually a subnode of ocp2scp to which it is connected. + +usb3phy@4a084400 { + compatible = "ti,phy-usb3"; + reg = <0x4a084400 0x80>, + <0x4a084800 0x64>, + <0x4a084c00 0x40>; + reg-names = "phy_rx", "phy_tx", "pll_ctrl"; + ctrl-module = <&omap_control_usb>; + #phy-cells = <0>; + clocks = <&usb_phy_cm_clk32k>, + <&sys_clkin>, + <&usb_otg_ss_refclk960m>; + clock-names = "wkupclk", + "sysclk", + "refclk"; +}; diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-imx.txt b/Documentation/devicetree/bindings/usb/ci-hdrc-imx.txt index b4b5b79..a6a32cb 100644 --- a/Documentation/devicetree/bindings/usb/ci-hdrc-imx.txt +++ b/Documentation/devicetree/bindings/usb/ci-hdrc-imx.txt @@ -18,6 +18,7 @@ Optional properties: - vbus-supply: regulator for vbus - disable-over-current: disable over current detect - external-vbus-divider: enables off-chip resistor divider for Vbus +- maximum-speed: limit the maximum connection speed to "full-speed". Examples: usb@02184000 { /* USB OTG */ @@ -28,4 +29,5 @@ usb@02184000 { /* USB OTG */ fsl,usbmisc = <&usbmisc 0>; disable-over-current; external-vbus-divider; + maximum-speed = "full-speed"; }; diff --git a/Documentation/devicetree/bindings/usb/ci-hdrc-zevio.txt b/Documentation/devicetree/bindings/usb/ci-hdrc-zevio.txt new file mode 100644 index 0000000..abbcb2a --- /dev/null +++ b/Documentation/devicetree/bindings/usb/ci-hdrc-zevio.txt @@ -0,0 +1,17 @@ +* LSI Zevio USB OTG Controller + +Required properties: +- compatible: Should be "lsi,zevio-usb" +- reg: Should contain registers location and length +- interrupts: Should contain controller interrupt + +Optional properties: +- vbus-supply: regulator for vbus + +Examples: + usb0: usb@b0000000 { + reg = <0xb0000000 0x1000>; + compatible = "lsi,zevio-usb"; + interrupts = <8>; + vbus-supply = <&vbus_reg>; + }; diff --git a/Documentation/devicetree/bindings/usb/dwc3.txt b/Documentation/devicetree/bindings/usb/dwc3.txt index e807635..471366d 100644 --- a/Documentation/devicetree/bindings/usb/dwc3.txt +++ b/Documentation/devicetree/bindings/usb/dwc3.txt @@ -6,11 +6,13 @@ Required properties: - compatible: must be "snps,dwc3" - reg : Address and length of the register set for the device - interrupts: Interrupts used by the dwc3 controller. + +Optional properties: - usb-phy : array of phandle for the PHY device. The first element in the array is expected to be a handle to the USB2/HS PHY and the second element is expected to be a handle to the USB3/SS PHY - -Optional properties: + - phys: from the *Generic PHY* bindings + - phy-names: from the *Generic PHY* bindings - tx-fifo-resize: determines if the FIFO *has* to be reallocated. This is usually a subnode to DWC3 glue to which it is connected. diff --git a/Documentation/devicetree/bindings/usb/mxs-phy.txt b/Documentation/devicetree/bindings/usb/mxs-phy.txt index 5835b27..cef181a 100644 --- a/Documentation/devicetree/bindings/usb/mxs-phy.txt +++ b/Documentation/devicetree/bindings/usb/mxs-phy.txt @@ -1,13 +1,19 @@ * Freescale MXS USB Phy Device Required properties: -- compatible: Should be "fsl,imx23-usbphy" +- compatible: should contain: + * "fsl,imx23-usbphy" for imx23 and imx28 + * "fsl,imx6q-usbphy" for imx6dq and imx6dl + * "fsl,imx6sl-usbphy" for imx6sl + "fsl,imx23-usbphy" is still a fallback for other strings - reg: Should contain registers location and length - interrupts: Should contain phy interrupt +- fsl,anatop: phandle for anatop register, it is only for imx6 SoC series Example: usbphy1: usbphy@020c9000 { compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy"; reg = <0x020c9000 0x1000>; interrupts = <0 44 0x04>; + fsl,anatop = <&anatop>; }; diff --git a/Documentation/devicetree/bindings/usb/omap-usb.txt b/Documentation/devicetree/bindings/usb/omap-usb.txt index c495135..38b2fae 100644 --- a/Documentation/devicetree/bindings/usb/omap-usb.txt +++ b/Documentation/devicetree/bindings/usb/omap-usb.txt @@ -76,27 +76,3 @@ omap_dwc3 { ranges; }; -OMAP CONTROL USB - -Required properties: - - compatible: Should be one of - "ti,control-phy-otghs" - if it has otghs_control mailbox register as on OMAP4. - "ti,control-phy-usb2" - if it has Power down bit in control_dev_conf register - e.g. USB2_PHY on OMAP5. - "ti,control-phy-pipe3" - if it has DPLL and individual Rx & Tx power control - e.g. USB3 PHY and SATA PHY on OMAP5. - "ti,control-phy-dra7usb2" - if it has power down register like USB2 PHY on - DRA7 platform. - "ti,control-phy-am437usb2" - if it has power down register like USB2 PHY on - AM437 platform. - - reg : Address and length of the register set for the device. It contains - the address of "otghs_control" for control-phy-otghs or "power" register - for other types. - - reg-names: should be "otghs_control" control-phy-otghs and "power" for - other types. - -omap_control_usb: omap-control-usb@4a002300 { - compatible = "ti,control-phy-otghs"; - reg = <0x4a00233c 0x4>; - reg-names = "otghs_control"; -}; diff --git a/Documentation/devicetree/bindings/usb/usb-ehci.txt b/Documentation/devicetree/bindings/usb/usb-ehci.txt index fa18612..ff151ec 100644 --- a/Documentation/devicetree/bindings/usb/usb-ehci.txt +++ b/Documentation/devicetree/bindings/usb/usb-ehci.txt @@ -1,19 +1,20 @@ USB EHCI controllers Required properties: - - compatible : should be "usb-ehci". + - compatible : should be "generic-ehci". - reg : should contain at least address and length of the standard EHCI register set for the device. Optional platform-dependent registers (debug-port or other) can be also specified here, but only after definition of standard EHCI registers. - interrupts : one EHCI interrupt should be described here. -If device registers are implemented in big endian mode, the device -node should have "big-endian-regs" property. -If controller implementation operates with big endian descriptors, -"big-endian-desc" property should be specified. -If both big endian registers and descriptors are used by the controller -implementation, "big-endian" property can be specified instead of having -both "big-endian-regs" and "big-endian-desc". + +Optional properties: + - big-endian-regs : boolean, set this for hcds with big-endian registers + - big-endian-desc : boolean, set this for hcds with big-endian descriptors + - big-endian : boolean, for hcds with big-endian-regs + big-endian-desc + - clocks : a list of phandle + clock specifier pairs + - phys : phandle + phy specifier pair + - phy-names : "usb" Example (Sequoia 440EPx): ehci@e0000300 { @@ -23,3 +24,13 @@ Example (Sequoia 440EPx): reg = <0 e0000300 90 0 e0000390 70>; big-endian; }; + +Example (Allwinner sun4i A10 SoC): + ehci0: usb@01c14000 { + compatible = "allwinner,sun4i-a10-ehci", "generic-ehci"; + reg = <0x01c14000 0x100>; + interrupts = <39>; + clocks = <&ahb_gates 1>; + phys = <&usbphy 1>; + phy-names = "usb"; + }; diff --git a/Documentation/devicetree/bindings/usb/usb-ohci.txt b/Documentation/devicetree/bindings/usb/usb-ohci.txt new file mode 100644 index 0000000..45f67d9 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/usb-ohci.txt @@ -0,0 +1,25 @@ +USB OHCI controllers + +Required properties: +- compatible : "generic-ohci" +- reg : ohci controller register range (address and length) +- interrupts : ohci controller interrupt + +Optional properties: +- big-endian-regs : boolean, set this for hcds with big-endian registers +- big-endian-desc : boolean, set this for hcds with big-endian descriptors +- big-endian : boolean, for hcds with big-endian-regs + big-endian-desc +- clocks : a list of phandle + clock specifier pairs +- phys : phandle + phy specifier pair +- phy-names : "usb" + +Example: + + ohci0: usb@01c14400 { + compatible = "allwinner,sun4i-a10-ohci", "generic-ohci"; + reg = <0x01c14400 0x100>; + interrupts = <64>; + clocks = <&usb_clk 6>, <&ahb_gates 2>; + phys = <&usbphy 1>; + phy-names = "usb"; + }; diff --git a/Documentation/devicetree/bindings/usb/usb-phy.txt b/Documentation/devicetree/bindings/usb/usb-phy.txt deleted file mode 100644 index c0245c8..0000000 --- a/Documentation/devicetree/bindings/usb/usb-phy.txt +++ /dev/null @@ -1,48 +0,0 @@ -USB PHY - -OMAP USB2 PHY - -Required properties: - - compatible: Should be "ti,omap-usb2" - - reg : Address and length of the register set for the device. - - #phy-cells: determine the number of cells that should be given in the - phandle while referencing this phy. - -Optional properties: - - ctrl-module : phandle of the control module used by PHY driver to power on - the PHY. - -This is usually a subnode of ocp2scp to which it is connected. - -usb2phy@4a0ad080 { - compatible = "ti,omap-usb2"; - reg = <0x4a0ad080 0x58>; - ctrl-module = <&omap_control_usb>; - #phy-cells = <0>; -}; - -OMAP USB3 PHY - -Required properties: - - compatible: Should be "ti,omap-usb3" - - reg : Address and length of the register set for the device. - - reg-names: The names of the register addresses corresponding to the registers - filled in "reg". - - #phy-cells: determine the number of cells that should be given in the - phandle while referencing this phy. - -Optional properties: - - ctrl-module : phandle of the control module used by PHY driver to power on - the PHY. - -This is usually a subnode of ocp2scp to which it is connected. - -usb3phy@4a084400 { - compatible = "ti,omap-usb3"; - reg = <0x4a084400 0x80>, - <0x4a084800 0x64>, - <0x4a084c00 0x40>; - reg-names = "phy_rx", "phy_tx", "pll_ctrl"; - ctrl-module = <&omap_control_usb>; - #phy-cells = <0>; -}; diff --git a/Documentation/devicetree/bindings/usb/platform-uhci.txt b/Documentation/devicetree/bindings/usb/usb-uhci.txt index a4fb071..2981334 100644 --- a/Documentation/devicetree/bindings/usb/platform-uhci.txt +++ b/Documentation/devicetree/bindings/usb/usb-uhci.txt @@ -2,14 +2,14 @@ Generic Platform UHCI Controller ----------------------------------------------------- Required properties: -- compatible : "platform-uhci" +- compatible : "generic-uhci" (deprecated: "platform-uhci") - reg : Should contain 1 register ranges(address and length) - interrupts : UHCI controller interrupt Example: uhci@d8007b00 { - compatible = "platform-uhci"; + compatible = "generic-uhci"; reg = <0xd8007b00 0x200>; interrupts = <43>; }; diff --git a/Documentation/devicetree/bindings/usb/usb-xhci.txt b/Documentation/devicetree/bindings/usb/usb-xhci.txt index 5752df0..90f8f60 100644 --- a/Documentation/devicetree/bindings/usb/usb-xhci.txt +++ b/Documentation/devicetree/bindings/usb/usb-xhci.txt @@ -1,14 +1,14 @@ USB xHCI controllers Required properties: - - compatible: should be "xhci-platform". + - compatible: should be "generic-xhci" (deprecated: "xhci-platform"). - reg: should contain address and length of the standard XHCI register set for the device. - interrupts: one XHCI interrupt should be described here. Example: usb@f0931000 { - compatible = "xhci-platform"; + compatible = "generic-xhci"; reg = <0xf0931000 0x8c8>; interrupts = <0x0 0x4e 0x0>; }; diff --git a/Documentation/devicetree/bindings/usb/via,vt8500-ehci.txt b/Documentation/devicetree/bindings/usb/via,vt8500-ehci.txt deleted file mode 100644 index 17b3ad1..0000000 --- a/Documentation/devicetree/bindings/usb/via,vt8500-ehci.txt +++ /dev/null @@ -1,15 +0,0 @@ -VIA/Wondermedia VT8500 EHCI Controller ------------------------------------------------------ - -Required properties: -- compatible : "via,vt8500-ehci" -- reg : Should contain 1 register ranges(address and length) -- interrupts : ehci controller interrupt - -Example: - - ehci@d8007900 { - compatible = "via,vt8500-ehci"; - reg = <0xd8007900 0x200>; - interrupts = <43>; - }; diff --git a/Documentation/devicetree/bindings/usb/vt8500-ehci.txt b/Documentation/devicetree/bindings/usb/vt8500-ehci.txt deleted file mode 100644 index 5fb8fd6..0000000 --- a/Documentation/devicetree/bindings/usb/vt8500-ehci.txt +++ /dev/null @@ -1,12 +0,0 @@ -VIA VT8500 and Wondermedia WM8xxx SoC USB controllers. - -Required properties: - - compatible: Should be "via,vt8500-ehci" or "wm,prizm-ehci". - - reg: Address range of the ehci registers. size should be 0x200 - - interrupts: Should contain the ehci interrupt. - -usb: ehci@D8007100 { - compatible = "wm,prizm-ehci", "usb-ehci"; - reg = <0xD8007100 0x200>; - interrupts = <1>; -}; diff --git a/Documentation/phy/samsung-usb2.txt b/Documentation/phy/samsung-usb2.txt new file mode 100644 index 0000000..ed12d43 --- /dev/null +++ b/Documentation/phy/samsung-usb2.txt @@ -0,0 +1,135 @@ +.------------------------------------------------------------------------------+ +| Samsung USB 2.0 PHY adaptation layer | ++-----------------------------------------------------------------------------+' + +| 1. Description ++---------------- + +The architecture of the USB 2.0 PHY module in Samsung SoCs is similar +among many SoCs. In spite of the similarities it proved difficult to +create a one driver that would fit all these PHY controllers. Often +the differences were minor and were found in particular bits of the +registers of the PHY. In some rare cases the order of register writes or +the PHY powering up process had to be altered. This adaptation layer is +a compromise between having separate drivers and having a single driver +with added support for many special cases. + +| 2. Files description ++---------------------- + +- phy-samsung-usb2.c + This is the main file of the adaptation layer. This file contains + the probe function and provides two callbacks to the Generic PHY + Framework. This two callbacks are used to power on and power off the + phy. They carry out the common work that has to be done on all version + of the PHY module. Depending on which SoC was chosen they execute SoC + specific callbacks. The specific SoC version is selected by choosing + the appropriate compatible string. In addition, this file contains + struct of_device_id definitions for particular SoCs. + +- phy-samsung-usb2.h + This is the include file. It declares the structures used by this + driver. In addition it should contain extern declarations for + structures that describe particular SoCs. + +| 3. Supporting SoCs ++-------------------- + +To support a new SoC a new file should be added to the drivers/phy +directory. Each SoC's configuration is stored in an instance of the +struct samsung_usb2_phy_config. + +struct samsung_usb2_phy_config { + const struct samsung_usb2_common_phy *phys; + int (*rate_to_clk)(unsigned long, u32 *); + unsigned int num_phys; + bool has_mode_switch; +}; + +The num_phys is the number of phys handled by the driver. *phys is an +array that contains the configuration for each phy. The has_mode_switch +property is a boolean flag that determines whether the SoC has USB host +and device on a single pair of pins. If so, a special register has to +be modified to change the internal routing of these pins between a USB +device or host module. + +For example the configuration for Exynos 4210 is following: + +const struct samsung_usb2_phy_config exynos4210_usb2_phy_config = { + .has_mode_switch = 0, + .num_phys = EXYNOS4210_NUM_PHYS, + .phys = exynos4210_phys, + .rate_to_clk = exynos4210_rate_to_clk, +} + +- int (*rate_to_clk)(unsigned long, u32 *) + The rate_to_clk callback is to convert the rate of the clock + used as the reference clock for the PHY module to the value + that should be written in the hardware register. + +The exynos4210_phys configuration array is as follows: + +static const struct samsung_usb2_common_phy exynos4210_phys[] = { + { + .label = "device", + .id = EXYNOS4210_DEVICE, + .power_on = exynos4210_power_on, + .power_off = exynos4210_power_off, + }, + { + .label = "host", + .id = EXYNOS4210_HOST, + .power_on = exynos4210_power_on, + .power_off = exynos4210_power_off, + }, + { + .label = "hsic0", + .id = EXYNOS4210_HSIC0, + .power_on = exynos4210_power_on, + .power_off = exynos4210_power_off, + }, + { + .label = "hsic1", + .id = EXYNOS4210_HSIC1, + .power_on = exynos4210_power_on, + .power_off = exynos4210_power_off, + }, + {}, +}; + +- int (*power_on)(struct samsung_usb2_phy_instance *); +- int (*power_off)(struct samsung_usb2_phy_instance *); + These two callbacks are used to power on and power off the phy + by modifying appropriate registers. + +Final change to the driver is adding appropriate compatible value to the +phy-samsung-usb2.c file. In case of Exynos 4210 the following lines were +added to the struct of_device_id samsung_usb2_phy_of_match[] array: + +#ifdef CONFIG_PHY_EXYNOS4210_USB2 + { + .compatible = "samsung,exynos4210-usb2-phy", + .data = &exynos4210_usb2_phy_config, + }, +#endif + +To add further flexibility to the driver the Kconfig file enables to +include support for selected SoCs in the compiled driver. The Kconfig +entry for Exynos 4210 is following: + +config PHY_EXYNOS4210_USB2 + bool "Support for Exynos 4210" + depends on PHY_SAMSUNG_USB2 + depends on CPU_EXYNOS4210 + help + Enable USB PHY support for Exynos 4210. This option requires that + Samsung USB 2.0 PHY driver is enabled and means that support for this + particular SoC is compiled in the driver. In case of Exynos 4210 four + phys are available - device, host, HSCI0 and HSCI1. + +The newly created file that supports the new SoC has to be also added to the +Makefile. In case of Exynos 4210 the added line is following: + +obj-$(CONFIG_PHY_EXYNOS4210_USB2) += phy-exynos4210-usb2.o + +After completing these steps the support for the new SoC should be ready. diff --git a/MAINTAINERS b/MAINTAINERS index 48a8840..7fe5977 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -9130,8 +9130,7 @@ S: Maintained F: drivers/net/wireless/ath/ar5523/ USB ATTACHED SCSI -M: Matthew Wilcox <willy@linux.intel.com> -M: Sarah Sharp <sarah.a.sharp@linux.intel.com> +M: Hans de Goede <hdegoede@redhat.com> M: Gerd Hoffmann <kraxel@redhat.com> L: linux-usb@vger.kernel.org L: linux-scsi@vger.kernel.org @@ -9357,7 +9356,7 @@ S: Maintained F: drivers/net/wireless/rndis_wlan.c USB XHCI DRIVER -M: Sarah Sharp <sarah.a.sharp@linux.intel.com> +M: Mathias Nyman <mathias.nyman@intel.com> L: linux-usb@vger.kernel.org S: Supported F: drivers/usb/host/xhci* diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 1594945..b76ae41 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -534,7 +534,6 @@ config ARCH_DOVE select PINCTRL select PINCTRL_DOVE select PLAT_ORION_LEGACY - select USB_ARCH_HAS_EHCI help Support for the Marvell Dove SoC 88AP510 @@ -633,7 +632,6 @@ config ARCH_LPC32XX select GENERIC_CLOCKEVENTS select HAVE_IDE select HAVE_PWM - select USB_ARCH_HAS_OHCI select USE_OF help Support for the NXP LPC32XX family of processors @@ -770,7 +768,6 @@ config ARCH_S3C64XX select SAMSUNG_ATAGS select SAMSUNG_WAKEMASK select SAMSUNG_WDT_RESET - select USB_ARCH_HAS_OHCI help Samsung S3C64XX series based systems diff --git a/arch/arm/mach-exynos/Kconfig b/arch/arm/mach-exynos/Kconfig index 4c414af..8d197dc 100644 --- a/arch/arm/mach-exynos/Kconfig +++ b/arch/arm/mach-exynos/Kconfig @@ -36,7 +36,6 @@ config ARCH_EXYNOS5 select HAVE_ARM_SCU if SMP select HAVE_SMP select PINCTRL - select USB_ARCH_HAS_XHCI help Samsung EXYNOS5 (Cortex-A15) SoC based systems diff --git a/arch/arm/mach-omap2/Kconfig b/arch/arm/mach-omap2/Kconfig index 0af7ca0..6fb91fb 100644 --- a/arch/arm/mach-omap2/Kconfig +++ b/arch/arm/mach-omap2/Kconfig @@ -21,7 +21,6 @@ config ARCH_OMAP3 select PM_OPP if PM select PM_RUNTIME if CPU_IDLE select SOC_HAS_OMAP2_SDRC - select USB_ARCH_HAS_EHCI if USB_SUPPORT config ARCH_OMAP4 bool "TI OMAP4" @@ -42,7 +41,6 @@ config ARCH_OMAP4 select PL310_ERRATA_727915 select PM_OPP if PM select PM_RUNTIME if CPU_IDLE - select USB_ARCH_HAS_EHCI if USB_SUPPORT select ARM_ERRATA_754322 select ARM_ERRATA_775420 diff --git a/arch/arm/mach-shmobile/Kconfig b/arch/arm/mach-shmobile/Kconfig index f6db7dc..3b8c874 100644 --- a/arch/arm/mach-shmobile/Kconfig +++ b/arch/arm/mach-shmobile/Kconfig @@ -114,8 +114,6 @@ config ARCH_R8A7778 select CPU_V7 select SH_CLK_CPG select ARM_GIC - select USB_ARCH_HAS_EHCI - select USB_ARCH_HAS_OHCI select SYS_SUPPORTS_SH_TMU config ARCH_R8A7779 @@ -124,8 +122,6 @@ config ARCH_R8A7779 select ARM_GIC select CPU_V7 select SH_CLK_CPG - select USB_ARCH_HAS_EHCI - select USB_ARCH_HAS_OHCI select RENESAS_INTC_IRQPIN select SYS_SUPPORTS_SH_TMU diff --git a/arch/arm/mach-tegra/Kconfig b/arch/arm/mach-tegra/Kconfig index b1232d8..4926bd1 100644 --- a/arch/arm/mach-tegra/Kconfig +++ b/arch/arm/mach-tegra/Kconfig @@ -19,7 +19,6 @@ config ARCH_TEGRA select RESET_CONTROLLER select SOC_BUS select SPARSE_IRQ - select USB_ARCH_HAS_EHCI if USB_SUPPORT select USB_ULPI if USB_PHY select USB_ULPI_VIEWPORT if USB_PHY select USE_OF diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 95fa1f1..cb1da37 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -67,8 +67,6 @@ config MIPS_ALCHEMY select SYS_SUPPORTS_APM_EMULATION select ARCH_REQUIRE_GPIOLIB select SYS_SUPPORTS_ZBOOT - select USB_ARCH_HAS_OHCI - select USB_ARCH_HAS_EHCI config AR7 bool "Texas Instruments AR7" @@ -360,7 +358,6 @@ config MIPS_SEAD3 select SYS_SUPPORTS_LITTLE_ENDIAN select SYS_SUPPORTS_SMARTMIPS select SYS_SUPPORTS_MICROMIPS - select USB_ARCH_HAS_EHCI select USB_EHCI_BIG_ENDIAN_DESC select USB_EHCI_BIG_ENDIAN_MMIO select USE_OF @@ -718,8 +715,6 @@ config CAVIUM_OCTEON_SOC select SWAP_IO_SPACE select HW_HAS_PCI select ZONE_DMA32 - select USB_ARCH_HAS_OHCI - select USB_ARCH_HAS_EHCI select HOLES_IN_ZONE select ARCH_REQUIRE_GPIOLIB help @@ -756,8 +751,6 @@ config NLM_XLR_BOARD select ZONE_DMA32 if 64BIT select SYNC_R4K select SYS_HAS_EARLY_PRINTK - select USB_ARCH_HAS_OHCI if USB_SUPPORT - select USB_ARCH_HAS_EHCI if USB_SUPPORT select SYS_SUPPORTS_ZBOOT select SYS_SUPPORTS_ZBOOT_UART16550 help diff --git a/arch/mips/ath79/Kconfig b/arch/mips/ath79/Kconfig index 3995e31..dfc6020 100644 --- a/arch/mips/ath79/Kconfig +++ b/arch/mips/ath79/Kconfig @@ -74,34 +74,26 @@ config ATH79_MACH_UBNT_XM endmenu config SOC_AR71XX - select USB_ARCH_HAS_EHCI - select USB_ARCH_HAS_OHCI select HW_HAS_PCI def_bool n config SOC_AR724X - select USB_ARCH_HAS_EHCI - select USB_ARCH_HAS_OHCI select HW_HAS_PCI select PCI_AR724X if PCI def_bool n config SOC_AR913X - select USB_ARCH_HAS_EHCI def_bool n config SOC_AR933X - select USB_ARCH_HAS_EHCI def_bool n config SOC_AR934X - select USB_ARCH_HAS_EHCI select HW_HAS_PCI select PCI_AR724X if PCI def_bool n config SOC_QCA955X - select USB_ARCH_HAS_EHCI select HW_HAS_PCI select PCI_AR724X if PCI def_bool n diff --git a/arch/mips/ralink/Kconfig b/arch/mips/ralink/Kconfig index 1bfd1c1..4a29665 100644 --- a/arch/mips/ralink/Kconfig +++ b/arch/mips/ralink/Kconfig @@ -20,19 +20,13 @@ choice config SOC_RT305X bool "RT305x" select USB_ARCH_HAS_HCD - select USB_ARCH_HAS_OHCI - select USB_ARCH_HAS_EHCI config SOC_RT3883 bool "RT3883" - select USB_ARCH_HAS_OHCI - select USB_ARCH_HAS_EHCI select HW_HAS_PCI config SOC_MT7620 bool "MT7620" - select USB_ARCH_HAS_OHCI - select USB_ARCH_HAS_EHCI endchoice diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig index d6c7506..dc1a264 100644 --- a/arch/powerpc/platforms/44x/Kconfig +++ b/arch/powerpc/platforms/44x/Kconfig @@ -265,7 +265,6 @@ config 440EP select PPC_FPU select IBM440EP_ERR42 select IBM_EMAC_ZMII - select USB_ARCH_HAS_OHCI config 440EPX bool diff --git a/arch/powerpc/platforms/ps3/Kconfig b/arch/powerpc/platforms/ps3/Kconfig index e87c194..56f2740 100644 --- a/arch/powerpc/platforms/ps3/Kconfig +++ b/arch/powerpc/platforms/ps3/Kconfig @@ -2,10 +2,8 @@ config PPC_PS3 bool "Sony PS3" depends on PPC64 && PPC_BOOK3S select PPC_CELL - select USB_ARCH_HAS_OHCI select USB_OHCI_LITTLE_ENDIAN select USB_OHCI_BIG_ENDIAN_MMIO - select USB_ARCH_HAS_EHCI select USB_EHCI_BIG_ENDIAN_MMIO select PPC_PCI_CHOICE help diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index 364d204..1399383 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -347,7 +347,6 @@ config CPU_SUBTYPE_SH7720 select CPU_HAS_DSP select SYS_SUPPORTS_SH_CMT select ARCH_WANT_OPTIONAL_GPIOLIB - select USB_ARCH_HAS_OHCI select USB_OHCI_SH if USB_OHCI_HCD select PINCTRL help @@ -358,7 +357,6 @@ config CPU_SUBTYPE_SH7721 select CPU_SH3 select CPU_HAS_DSP select SYS_SUPPORTS_SH_CMT - select USB_ARCH_HAS_OHCI select USB_OHCI_SH if USB_OHCI_HCD help Select SH7721 if you have a SH3-DSP SH7721 CPU. @@ -436,8 +434,6 @@ config CPU_SUBTYPE_SH7734 select CPU_SH4A select CPU_SHX2 select ARCH_WANT_OPTIONAL_GPIOLIB - select USB_ARCH_HAS_OHCI - select USB_ARCH_HAS_EHCI select PINCTRL help Select SH7734 if you have a SH4A SH7734 CPU. @@ -447,8 +443,6 @@ config CPU_SUBTYPE_SH7757 select CPU_SH4A select CPU_SHX2 select ARCH_WANT_OPTIONAL_GPIOLIB - select USB_ARCH_HAS_OHCI - select USB_ARCH_HAS_EHCI select PINCTRL help Select SH7757 if you have a SH4A SH7757 CPU. @@ -456,7 +450,6 @@ config CPU_SUBTYPE_SH7757 config CPU_SUBTYPE_SH7763 bool "Support SH7763 processor" select CPU_SH4A - select USB_ARCH_HAS_OHCI select USB_OHCI_SH if USB_OHCI_HCD help Select SH7763 if you have a SH4A SH7763(R5S77631) CPU. @@ -485,9 +478,7 @@ config CPU_SUBTYPE_SH7786 select CPU_HAS_PTEAEX select GENERIC_CLOCKEVENTS_BROADCAST if SMP select ARCH_WANT_OPTIONAL_GPIOLIB - select USB_ARCH_HAS_OHCI select USB_OHCI_SH if USB_OHCI_HCD - select USB_ARCH_HAS_EHCI select USB_EHCI_SH if USB_EHCI_HCD select PINCTRL diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c index cc32a6f..2448d75 100644 --- a/drivers/hid/hid-core.c +++ b/drivers/hid/hid-core.c @@ -2278,6 +2278,7 @@ static const struct hid_device_id hid_ignore_list[] = { { HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_1_PHIDGETSERVO_20) }, { HID_USB_DEVICE(USB_VENDOR_ID_WISEGROUP, USB_DEVICE_ID_8_8_4_IF_KIT) }, { HID_USB_DEVICE(USB_VENDOR_ID_YEALINK, USB_DEVICE_ID_YEALINK_P1K_P4K_B2K) }, + { HID_USB_DEVICE(USB_VENDOR_ID_RISO_KAGAKU, USB_DEVICE_ID_RI_KA_WEBMAIL) }, { } }; diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h index 22f28d6..830de69 100644 --- a/drivers/hid/hid-ids.h +++ b/drivers/hid/hid-ids.h @@ -961,4 +961,7 @@ #define USB_DEVICE_ID_PRIMAX_KEYBOARD 0x4e05 +#define USB_VENDOR_ID_RISO_KAGAKU 0x1294 /* Riso Kagaku Corp. */ +#define USB_DEVICE_ID_RI_KA_WEBMAIL 0x1320 /* Webmail Notifier */ + #endif diff --git a/drivers/phy/Kconfig b/drivers/phy/Kconfig index c7a551c..8d3c49c 100644 --- a/drivers/phy/Kconfig +++ b/drivers/phy/Kconfig @@ -16,30 +16,56 @@ config GENERIC_PHY framework should select this config. config PHY_EXYNOS_MIPI_VIDEO - depends on HAS_IOMEM tristate "S5P/EXYNOS SoC series MIPI CSI-2/DSI PHY driver" + depends on HAS_IOMEM + depends on ARCH_S5PV210 || ARCH_EXYNOS || COMPILE_TEST + select GENERIC_PHY + default y if ARCH_S5PV210 || ARCH_EXYNOS help Support for MIPI CSI-2 and MIPI DSI DPHY found on Samsung S5P and EXYNOS SoCs. config PHY_MVEBU_SATA def_bool y - depends on ARCH_KIRKWOOD || ARCH_DOVE + depends on ARCH_KIRKWOOD || ARCH_DOVE || MACH_DOVE depends on OF select GENERIC_PHY +config OMAP_CONTROL_PHY + tristate "OMAP CONTROL PHY Driver" + help + Enable this to add support for the PHY part present in the control + module. This driver has API to power on the USB2 PHY and to write to + the mailbox. The mailbox is present only in omap4 and the register to + power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an + additional register to power on USB3 PHY/SATA PHY/PCIE PHY + (PIPE3 PHY). + config OMAP_USB2 tristate "OMAP USB2 PHY Driver" depends on ARCH_OMAP2PLUS depends on USB_PHY select GENERIC_PHY - select OMAP_CONTROL_USB + select OMAP_CONTROL_PHY + depends on OMAP_OCP2SCP help Enable this to support the transceiver that is part of SOC. This driver takes care of all the PHY functionality apart from comparator. The USB OTG controller communicates with the comparator using this driver. +config TI_PIPE3 + tristate "TI PIPE3 PHY Driver" + depends on ARCH_OMAP2PLUS || COMPILE_TEST + select GENERIC_PHY + select OMAP_CONTROL_PHY + depends on OMAP_OCP2SCP + help + Enable this to support the PIPE3 PHY that is part of TI SOCs. This + driver takes care of all the PHY functionality apart from comparator. + This driver interacts with the "OMAP Control PHY Driver" to power + on/off the PHY. + config TWL4030_USB tristate "TWL4030 USB Transceiver Driver" depends on TWL4030_CORE && REGULATOR_TWL4030 && USB_MUSB_OMAP2PLUS @@ -54,6 +80,8 @@ config TWL4030_USB config PHY_EXYNOS_DP_VIDEO tristate "EXYNOS SoC series Display Port PHY driver" depends on OF + depends on ARCH_EXYNOS || COMPILE_TEST + default ARCH_EXYNOS select GENERIC_PHY help Support for Display Port PHY found on Samsung EXYNOS SoCs. @@ -65,4 +93,77 @@ config BCM_KONA_USB2_PHY help Enable this to support the Broadcom Kona USB 2.0 PHY. +config PHY_EXYNOS5250_SATA + tristate "Exynos5250 Sata SerDes/PHY driver" + depends on SOC_EXYNOS5250 + depends on HAS_IOMEM + depends on OF + select GENERIC_PHY + select I2C + select I2C_S3C2410 + select MFD_SYSCON + help + Enable this to support SATA SerDes/Phy found on Samsung's + Exynos5250 based SoCs.This SerDes/Phy supports SATA 1.5 Gb/s, + SATA 3.0 Gb/s, SATA 6.0 Gb/s speeds. It supports one SATA host + port to accept one SATA device. + +config PHY_SUN4I_USB + tristate "Allwinner sunxi SoC USB PHY driver" + depends on ARCH_SUNXI && HAS_IOMEM && OF + select GENERIC_PHY + help + Enable this to support the transceiver that is part of Allwinner + sunxi SoCs. + + This driver controls the entire USB PHY block, both the USB OTG + parts, as well as the 2 regular USB 2 host PHYs. + +config PHY_SAMSUNG_USB2 + tristate "Samsung USB 2.0 PHY driver" + select GENERIC_PHY + select MFD_SYSCON + help + Enable this to support the Samsung USB 2.0 PHY driver for Samsung + SoCs. This driver provides the interface for USB 2.0 PHY. Support for + particular SoCs has to be enabled in addition to this driver. Number + and type of supported phys depends on the SoC. + +config PHY_EXYNOS4210_USB2 + bool "Support for Exynos 4210" + depends on PHY_SAMSUNG_USB2 + depends on CPU_EXYNOS4210 + help + Enable USB PHY support for Exynos 4210. This option requires that + Samsung USB 2.0 PHY driver is enabled and means that support for this + particular SoC is compiled in the driver. In case of Exynos 4210 four + phys are available - device, host, HSIC0 and HSIC1. + +config PHY_EXYNOS4X12_USB2 + bool "Support for Exynos 4x12" + depends on PHY_SAMSUNG_USB2 + depends on (SOC_EXYNOS4212 || SOC_EXYNOS4412) + help + Enable USB PHY support for Exynos 4x12. This option requires that + Samsung USB 2.0 PHY driver is enabled and means that support for this + particular SoC is compiled in the driver. In case of Exynos 4x12 four + phys are available - device, host, HSIC0 and HSIC1. + +config PHY_EXYNOS5250_USB2 + bool "Support for Exynos 5250" + depends on PHY_SAMSUNG_USB2 + depends on SOC_EXYNOS5250 + help + Enable USB PHY support for Exynos 5250. This option requires that + Samsung USB 2.0 PHY driver is enabled and means that support for this + particular SoC is compiled in the driver. In case of Exynos 5250 four + phys are available - device, host, HSIC0 and HSIC. + +config PHY_XGENE + tristate "APM X-Gene 15Gbps PHY support" + depends on HAS_IOMEM && OF && (ARM64 || COMPILE_TEST) + select GENERIC_PHY + help + This option enables support for APM X-Gene SoC multi-purpose PHY. + endmenu diff --git a/drivers/phy/Makefile b/drivers/phy/Makefile index b57c253..2faf78e 100644 --- a/drivers/phy/Makefile +++ b/drivers/phy/Makefile @@ -7,5 +7,14 @@ obj-$(CONFIG_BCM_KONA_USB2_PHY) += phy-bcm-kona-usb2.o obj-$(CONFIG_PHY_EXYNOS_DP_VIDEO) += phy-exynos-dp-video.o obj-$(CONFIG_PHY_EXYNOS_MIPI_VIDEO) += phy-exynos-mipi-video.o obj-$(CONFIG_PHY_MVEBU_SATA) += phy-mvebu-sata.o +obj-$(CONFIG_OMAP_CONTROL_PHY) += phy-omap-control.o obj-$(CONFIG_OMAP_USB2) += phy-omap-usb2.o +obj-$(CONFIG_TI_PIPE3) += phy-ti-pipe3.o obj-$(CONFIG_TWL4030_USB) += phy-twl4030-usb.o +obj-$(CONFIG_PHY_EXYNOS5250_SATA) += phy-exynos5250-sata.o +obj-$(CONFIG_PHY_SUN4I_USB) += phy-sun4i-usb.o +obj-$(CONFIG_PHY_SAMSUNG_USB2) += phy-samsung-usb2.o +obj-$(CONFIG_PHY_EXYNOS4210_USB2) += phy-exynos4210-usb2.o +obj-$(CONFIG_PHY_EXYNOS4X12_USB2) += phy-exynos4x12-usb2.o +obj-$(CONFIG_PHY_EXYNOS5250_USB2) += phy-exynos5250-usb2.o +obj-$(CONFIG_PHY_XGENE) += phy-xgene.o diff --git a/drivers/phy/phy-bcm-kona-usb2.c b/drivers/phy/phy-bcm-kona-usb2.c index efc5c1a..e94f5a6 100644 --- a/drivers/phy/phy-bcm-kona-usb2.c +++ b/drivers/phy/phy-bcm-kona-usb2.c @@ -128,10 +128,8 @@ static int bcm_kona_usb2_probe(struct platform_device *pdev) phy_provider = devm_of_phy_provider_register(dev, of_phy_simple_xlate); - if (IS_ERR(phy_provider)) - return PTR_ERR(phy_provider); - return 0; + return PTR_ERR_OR_ZERO(phy_provider); } static const struct of_device_id bcm_kona_usb2_dt_ids[] = { diff --git a/drivers/phy/phy-core.c b/drivers/phy/phy-core.c index 6c73837..623b71c 100644 --- a/drivers/phy/phy-core.c +++ b/drivers/phy/phy-core.c @@ -274,8 +274,8 @@ int phy_power_off(struct phy *phy) EXPORT_SYMBOL_GPL(phy_power_off); /** - * of_phy_get() - lookup and obtain a reference to a phy by phandle - * @dev: device that requests this phy + * _of_phy_get() - lookup and obtain a reference to a phy by phandle + * @np: device_node for which to get the phy * @index: the index of the phy * * Returns the phy associated with the given phandle value, @@ -284,20 +284,17 @@ EXPORT_SYMBOL_GPL(phy_power_off); * not yet loaded. This function uses of_xlate call back function provided * while registering the phy_provider to find the phy instance. */ -static struct phy *of_phy_get(struct device *dev, int index) +static struct phy *_of_phy_get(struct device_node *np, int index) { int ret; struct phy_provider *phy_provider; struct phy *phy = NULL; struct of_phandle_args args; - ret = of_parse_phandle_with_args(dev->of_node, "phys", "#phy-cells", + ret = of_parse_phandle_with_args(np, "phys", "#phy-cells", index, &args); - if (ret) { - dev_dbg(dev, "failed to get phy in %s node\n", - dev->of_node->full_name); + if (ret) return ERR_PTR(-ENODEV); - } mutex_lock(&phy_provider_mutex); phy_provider = of_phy_provider_lookup(args.np); @@ -317,6 +314,36 @@ err0: } /** + * of_phy_get() - lookup and obtain a reference to a phy using a device_node. + * @np: device_node for which to get the phy + * @con_id: name of the phy from device's point of view + * + * Returns the phy driver, after getting a refcount to it; or + * -ENODEV if there is no such phy. The caller is responsible for + * calling phy_put() to release that count. + */ +struct phy *of_phy_get(struct device_node *np, const char *con_id) +{ + struct phy *phy = NULL; + int index = 0; + + if (con_id) + index = of_property_match_string(np, "phy-names", con_id); + + phy = _of_phy_get(np, index); + if (IS_ERR(phy)) + return phy; + + if (!try_module_get(phy->ops->owner)) + return ERR_PTR(-EPROBE_DEFER); + + get_device(&phy->dev); + + return phy; +} +EXPORT_SYMBOL_GPL(of_phy_get); + +/** * phy_put() - release the PHY * @phy: the phy returned by phy_get() * @@ -407,7 +434,7 @@ struct phy *phy_get(struct device *dev, const char *string) if (dev->of_node) { index = of_property_match_string(dev->of_node, "phy-names", string); - phy = of_phy_get(dev, index); + phy = _of_phy_get(dev->of_node, index); } else { phy = phy_lookup(dev, string); } @@ -499,6 +526,37 @@ struct phy *devm_phy_optional_get(struct device *dev, const char *string) EXPORT_SYMBOL_GPL(devm_phy_optional_get); /** + * devm_of_phy_get() - lookup and obtain a reference to a phy. + * @dev: device that requests this phy + * @np: node containing the phy + * @con_id: name of the phy from device's point of view + * + * Gets the phy using of_phy_get(), and associates a device with it using + * devres. On driver detach, release function is invoked on the devres data, + * then, devres data is freed. + */ +struct phy *devm_of_phy_get(struct device *dev, struct device_node *np, + const char *con_id) +{ + struct phy **ptr, *phy; + + ptr = devres_alloc(devm_phy_release, sizeof(*ptr), GFP_KERNEL); + if (!ptr) + return ERR_PTR(-ENOMEM); + + phy = of_phy_get(np, con_id); + if (!IS_ERR(phy)) { + *ptr = phy; + devres_add(dev, ptr); + } else { + devres_free(ptr); + } + + return phy; +} +EXPORT_SYMBOL_GPL(devm_of_phy_get); + +/** * phy_create() - create a new phy * @dev: device that is creating the new phy * @ops: function pointers for performing phy operations diff --git a/drivers/phy/phy-exynos4210-usb2.c b/drivers/phy/phy-exynos4210-usb2.c new file mode 100644 index 0000000..236a52a --- /dev/null +++ b/drivers/phy/phy-exynos4210-usb2.c @@ -0,0 +1,261 @@ +/* + * Samsung SoC USB 1.1/2.0 PHY driver - Exynos 4210 support + * + * Copyright (C) 2013 Samsung Electronics Co., Ltd. + * Author: Kamil Debski <k.debski@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/phy/phy.h> +#include <linux/regmap.h> +#include "phy-samsung-usb2.h" + +/* Exynos USB PHY registers */ + +/* PHY power control */ +#define EXYNOS_4210_UPHYPWR 0x0 + +#define EXYNOS_4210_UPHYPWR_PHY0_SUSPEND BIT(0) +#define EXYNOS_4210_UPHYPWR_PHY0_PWR BIT(3) +#define EXYNOS_4210_UPHYPWR_PHY0_OTG_PWR BIT(4) +#define EXYNOS_4210_UPHYPWR_PHY0_SLEEP BIT(5) +#define EXYNOS_4210_UPHYPWR_PHY0 ( \ + EXYNOS_4210_UPHYPWR_PHY0_SUSPEND | \ + EXYNOS_4210_UPHYPWR_PHY0_PWR | \ + EXYNOS_4210_UPHYPWR_PHY0_OTG_PWR | \ + EXYNOS_4210_UPHYPWR_PHY0_SLEEP) + +#define EXYNOS_4210_UPHYPWR_PHY1_SUSPEND BIT(6) +#define EXYNOS_4210_UPHYPWR_PHY1_PWR BIT(7) +#define EXYNOS_4210_UPHYPWR_PHY1_SLEEP BIT(8) +#define EXYNOS_4210_UPHYPWR_PHY1 ( \ + EXYNOS_4210_UPHYPWR_PHY1_SUSPEND | \ + EXYNOS_4210_UPHYPWR_PHY1_PWR | \ + EXYNOS_4210_UPHYPWR_PHY1_SLEEP) + +#define EXYNOS_4210_UPHYPWR_HSIC0_SUSPEND BIT(9) +#define EXYNOS_4210_UPHYPWR_HSIC0_SLEEP BIT(10) +#define EXYNOS_4210_UPHYPWR_HSIC0 ( \ + EXYNOS_4210_UPHYPWR_HSIC0_SUSPEND | \ + EXYNOS_4210_UPHYPWR_HSIC0_SLEEP) + +#define EXYNOS_4210_UPHYPWR_HSIC1_SUSPEND BIT(11) +#define EXYNOS_4210_UPHYPWR_HSIC1_SLEEP BIT(12) +#define EXYNOS_4210_UPHYPWR_HSIC1 ( \ + EXYNOS_4210_UPHYPWR_HSIC1_SUSPEND | \ + EXYNOS_4210_UPHYPWR_HSIC1_SLEEP) + +/* PHY clock control */ +#define EXYNOS_4210_UPHYCLK 0x4 + +#define EXYNOS_4210_UPHYCLK_PHYFSEL_MASK (0x3 << 0) +#define EXYNOS_4210_UPHYCLK_PHYFSEL_OFFSET 0 +#define EXYNOS_4210_UPHYCLK_PHYFSEL_48MHZ (0x0 << 0) +#define EXYNOS_4210_UPHYCLK_PHYFSEL_24MHZ (0x3 << 0) +#define EXYNOS_4210_UPHYCLK_PHYFSEL_12MHZ (0x2 << 0) + +#define EXYNOS_4210_UPHYCLK_PHY0_ID_PULLUP BIT(2) +#define EXYNOS_4210_UPHYCLK_PHY0_COMMON_ON BIT(4) +#define EXYNOS_4210_UPHYCLK_PHY1_COMMON_ON BIT(7) + +/* PHY reset control */ +#define EXYNOS_4210_UPHYRST 0x8 + +#define EXYNOS_4210_URSTCON_PHY0 BIT(0) +#define EXYNOS_4210_URSTCON_OTG_HLINK BIT(1) +#define EXYNOS_4210_URSTCON_OTG_PHYLINK BIT(2) +#define EXYNOS_4210_URSTCON_PHY1_ALL BIT(3) +#define EXYNOS_4210_URSTCON_PHY1_P0 BIT(4) +#define EXYNOS_4210_URSTCON_PHY1_P1P2 BIT(5) +#define EXYNOS_4210_URSTCON_HOST_LINK_ALL BIT(6) +#define EXYNOS_4210_URSTCON_HOST_LINK_P0 BIT(7) +#define EXYNOS_4210_URSTCON_HOST_LINK_P1 BIT(8) +#define EXYNOS_4210_URSTCON_HOST_LINK_P2 BIT(9) + +/* Isolation, configured in the power management unit */ +#define EXYNOS_4210_USB_ISOL_DEVICE_OFFSET 0x704 +#define EXYNOS_4210_USB_ISOL_DEVICE BIT(0) +#define EXYNOS_4210_USB_ISOL_HOST_OFFSET 0x708 +#define EXYNOS_4210_USB_ISOL_HOST BIT(0) + +/* USBYPHY1 Floating prevention */ +#define EXYNOS_4210_UPHY1CON 0x34 +#define EXYNOS_4210_UPHY1CON_FLOAT_PREVENTION 0x1 + +/* Mode switching SUB Device <-> Host */ +#define EXYNOS_4210_MODE_SWITCH_OFFSET 0x21c +#define EXYNOS_4210_MODE_SWITCH_MASK 1 +#define EXYNOS_4210_MODE_SWITCH_DEVICE 0 +#define EXYNOS_4210_MODE_SWITCH_HOST 1 + +enum exynos4210_phy_id { + EXYNOS4210_DEVICE, + EXYNOS4210_HOST, + EXYNOS4210_HSIC0, + EXYNOS4210_HSIC1, + EXYNOS4210_NUM_PHYS, +}; + +/* + * exynos4210_rate_to_clk() converts the supplied clock rate to the value that + * can be written to the phy register. + */ +static int exynos4210_rate_to_clk(unsigned long rate, u32 *reg) +{ + switch (rate) { + case 12 * MHZ: + *reg = EXYNOS_4210_UPHYCLK_PHYFSEL_12MHZ; + break; + case 24 * MHZ: + *reg = EXYNOS_4210_UPHYCLK_PHYFSEL_24MHZ; + break; + case 48 * MHZ: + *reg = EXYNOS_4210_UPHYCLK_PHYFSEL_48MHZ; + break; + default: + return -EINVAL; + } + + return 0; +} + +static void exynos4210_isol(struct samsung_usb2_phy_instance *inst, bool on) +{ + struct samsung_usb2_phy_driver *drv = inst->drv; + u32 offset; + u32 mask; + + switch (inst->cfg->id) { + case EXYNOS4210_DEVICE: + offset = EXYNOS_4210_USB_ISOL_DEVICE_OFFSET; + mask = EXYNOS_4210_USB_ISOL_DEVICE; + break; + case EXYNOS4210_HOST: + offset = EXYNOS_4210_USB_ISOL_HOST_OFFSET; + mask = EXYNOS_4210_USB_ISOL_HOST; + break; + default: + return; + }; + + regmap_update_bits(drv->reg_pmu, offset, mask, on ? 0 : mask); +} + +static void exynos4210_phy_pwr(struct samsung_usb2_phy_instance *inst, bool on) +{ + struct samsung_usb2_phy_driver *drv = inst->drv; + u32 rstbits = 0; + u32 phypwr = 0; + u32 rst; + u32 pwr; + u32 clk; + + switch (inst->cfg->id) { + case EXYNOS4210_DEVICE: + phypwr = EXYNOS_4210_UPHYPWR_PHY0; + rstbits = EXYNOS_4210_URSTCON_PHY0; + break; + case EXYNOS4210_HOST: + phypwr = EXYNOS_4210_UPHYPWR_PHY1; + rstbits = EXYNOS_4210_URSTCON_PHY1_ALL | + EXYNOS_4210_URSTCON_PHY1_P0 | + EXYNOS_4210_URSTCON_PHY1_P1P2 | + EXYNOS_4210_URSTCON_HOST_LINK_ALL | + EXYNOS_4210_URSTCON_HOST_LINK_P0; + writel(on, drv->reg_phy + EXYNOS_4210_UPHY1CON); + break; + case EXYNOS4210_HSIC0: + phypwr = EXYNOS_4210_UPHYPWR_HSIC0; + rstbits = EXYNOS_4210_URSTCON_PHY1_P1P2 | + EXYNOS_4210_URSTCON_HOST_LINK_P1; + break; + case EXYNOS4210_HSIC1: + phypwr = EXYNOS_4210_UPHYPWR_HSIC1; + rstbits = EXYNOS_4210_URSTCON_PHY1_P1P2 | + EXYNOS_4210_URSTCON_HOST_LINK_P2; + break; + }; + + if (on) { + clk = readl(drv->reg_phy + EXYNOS_4210_UPHYCLK); + clk &= ~EXYNOS_4210_UPHYCLK_PHYFSEL_MASK; + clk |= drv->ref_reg_val << EXYNOS_4210_UPHYCLK_PHYFSEL_OFFSET; + writel(clk, drv->reg_phy + EXYNOS_4210_UPHYCLK); + + pwr = readl(drv->reg_phy + EXYNOS_4210_UPHYPWR); + pwr &= ~phypwr; + writel(pwr, drv->reg_phy + EXYNOS_4210_UPHYPWR); + + rst = readl(drv->reg_phy + EXYNOS_4210_UPHYRST); + rst |= rstbits; + writel(rst, drv->reg_phy + EXYNOS_4210_UPHYRST); + udelay(10); + rst &= ~rstbits; + writel(rst, drv->reg_phy + EXYNOS_4210_UPHYRST); + /* The following delay is necessary for the reset sequence to be + * completed */ + udelay(80); + } else { + pwr = readl(drv->reg_phy + EXYNOS_4210_UPHYPWR); + pwr |= phypwr; + writel(pwr, drv->reg_phy + EXYNOS_4210_UPHYPWR); + } +} + +static int exynos4210_power_on(struct samsung_usb2_phy_instance *inst) +{ + /* Order of initialisation is important - first power then isolation */ + exynos4210_phy_pwr(inst, 1); + exynos4210_isol(inst, 0); + + return 0; +} + +static int exynos4210_power_off(struct samsung_usb2_phy_instance *inst) +{ + exynos4210_isol(inst, 1); + exynos4210_phy_pwr(inst, 0); + + return 0; +} + + +static const struct samsung_usb2_common_phy exynos4210_phys[] = { + { + .label = "device", + .id = EXYNOS4210_DEVICE, + .power_on = exynos4210_power_on, + .power_off = exynos4210_power_off, + }, + { + .label = "host", + .id = EXYNOS4210_HOST, + .power_on = exynos4210_power_on, + .power_off = exynos4210_power_off, + }, + { + .label = "hsic0", + .id = EXYNOS4210_HSIC0, + .power_on = exynos4210_power_on, + .power_off = exynos4210_power_off, + }, + { + .label = "hsic1", + .id = EXYNOS4210_HSIC1, + .power_on = exynos4210_power_on, + .power_off = exynos4210_power_off, + }, + {}, +}; + +const struct samsung_usb2_phy_config exynos4210_usb2_phy_config = { + .has_mode_switch = 0, + .num_phys = EXYNOS4210_NUM_PHYS, + .phys = exynos4210_phys, + .rate_to_clk = exynos4210_rate_to_clk, +}; diff --git a/drivers/phy/phy-exynos4x12-usb2.c b/drivers/phy/phy-exynos4x12-usb2.c new file mode 100644 index 0000000..d92a7cc --- /dev/null +++ b/drivers/phy/phy-exynos4x12-usb2.c @@ -0,0 +1,328 @@ +/* + * Samsung SoC USB 1.1/2.0 PHY driver - Exynos 4x12 support + * + * Copyright (C) 2013 Samsung Electronics Co., Ltd. + * Author: Kamil Debski <k.debski@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/phy/phy.h> +#include <linux/regmap.h> +#include "phy-samsung-usb2.h" + +/* Exynos USB PHY registers */ + +/* PHY power control */ +#define EXYNOS_4x12_UPHYPWR 0x0 + +#define EXYNOS_4x12_UPHYPWR_PHY0_SUSPEND BIT(0) +#define EXYNOS_4x12_UPHYPWR_PHY0_PWR BIT(3) +#define EXYNOS_4x12_UPHYPWR_PHY0_OTG_PWR BIT(4) +#define EXYNOS_4x12_UPHYPWR_PHY0_SLEEP BIT(5) +#define EXYNOS_4x12_UPHYPWR_PHY0 ( \ + EXYNOS_4x12_UPHYPWR_PHY0_SUSPEND | \ + EXYNOS_4x12_UPHYPWR_PHY0_PWR | \ + EXYNOS_4x12_UPHYPWR_PHY0_OTG_PWR | \ + EXYNOS_4x12_UPHYPWR_PHY0_SLEEP) + +#define EXYNOS_4x12_UPHYPWR_PHY1_SUSPEND BIT(6) +#define EXYNOS_4x12_UPHYPWR_PHY1_PWR BIT(7) +#define EXYNOS_4x12_UPHYPWR_PHY1_SLEEP BIT(8) +#define EXYNOS_4x12_UPHYPWR_PHY1 ( \ + EXYNOS_4x12_UPHYPWR_PHY1_SUSPEND | \ + EXYNOS_4x12_UPHYPWR_PHY1_PWR | \ + EXYNOS_4x12_UPHYPWR_PHY1_SLEEP) + +#define EXYNOS_4x12_UPHYPWR_HSIC0_SUSPEND BIT(9) +#define EXYNOS_4x12_UPHYPWR_HSIC0_PWR BIT(10) +#define EXYNOS_4x12_UPHYPWR_HSIC0_SLEEP BIT(11) +#define EXYNOS_4x12_UPHYPWR_HSIC0 ( \ + EXYNOS_4x12_UPHYPWR_HSIC0_SUSPEND | \ + EXYNOS_4x12_UPHYPWR_HSIC0_PWR | \ + EXYNOS_4x12_UPHYPWR_HSIC0_SLEEP) + +#define EXYNOS_4x12_UPHYPWR_HSIC1_SUSPEND BIT(12) +#define EXYNOS_4x12_UPHYPWR_HSIC1_PWR BIT(13) +#define EXYNOS_4x12_UPHYPWR_HSIC1_SLEEP BIT(14) +#define EXYNOS_4x12_UPHYPWR_HSIC1 ( \ + EXYNOS_4x12_UPHYPWR_HSIC1_SUSPEND | \ + EXYNOS_4x12_UPHYPWR_HSIC1_PWR | \ + EXYNOS_4x12_UPHYPWR_HSIC1_SLEEP) + +/* PHY clock control */ +#define EXYNOS_4x12_UPHYCLK 0x4 + +#define EXYNOS_4x12_UPHYCLK_PHYFSEL_MASK (0x7 << 0) +#define EXYNOS_4x12_UPHYCLK_PHYFSEL_OFFSET 0 +#define EXYNOS_4x12_UPHYCLK_PHYFSEL_9MHZ6 (0x0 << 0) +#define EXYNOS_4x12_UPHYCLK_PHYFSEL_10MHZ (0x1 << 0) +#define EXYNOS_4x12_UPHYCLK_PHYFSEL_12MHZ (0x2 << 0) +#define EXYNOS_4x12_UPHYCLK_PHYFSEL_19MHZ2 (0x3 << 0) +#define EXYNOS_4x12_UPHYCLK_PHYFSEL_20MHZ (0x4 << 0) +#define EXYNOS_4x12_UPHYCLK_PHYFSEL_24MHZ (0x5 << 0) +#define EXYNOS_4x12_UPHYCLK_PHYFSEL_50MHZ (0x7 << 0) + +#define EXYNOS_4x12_UPHYCLK_PHY0_ID_PULLUP BIT(3) +#define EXYNOS_4x12_UPHYCLK_PHY0_COMMON_ON BIT(4) +#define EXYNOS_4x12_UPHYCLK_PHY1_COMMON_ON BIT(7) + +#define EXYNOS_4x12_UPHYCLK_HSIC_REFCLK_MASK (0x7f << 10) +#define EXYNOS_4x12_UPHYCLK_HSIC_REFCLK_OFFSET 10 +#define EXYNOS_4x12_UPHYCLK_HSIC_REFCLK_12MHZ (0x24 << 10) +#define EXYNOS_4x12_UPHYCLK_HSIC_REFCLK_15MHZ (0x1c << 10) +#define EXYNOS_4x12_UPHYCLK_HSIC_REFCLK_16MHZ (0x1a << 10) +#define EXYNOS_4x12_UPHYCLK_HSIC_REFCLK_19MHZ2 (0x15 << 10) +#define EXYNOS_4x12_UPHYCLK_HSIC_REFCLK_20MHZ (0x14 << 10) + +/* PHY reset control */ +#define EXYNOS_4x12_UPHYRST 0x8 + +#define EXYNOS_4x12_URSTCON_PHY0 BIT(0) +#define EXYNOS_4x12_URSTCON_OTG_HLINK BIT(1) +#define EXYNOS_4x12_URSTCON_OTG_PHYLINK BIT(2) +#define EXYNOS_4x12_URSTCON_HOST_PHY BIT(3) +#define EXYNOS_4x12_URSTCON_PHY1 BIT(4) +#define EXYNOS_4x12_URSTCON_HSIC0 BIT(5) +#define EXYNOS_4x12_URSTCON_HSIC1 BIT(6) +#define EXYNOS_4x12_URSTCON_HOST_LINK_ALL BIT(7) +#define EXYNOS_4x12_URSTCON_HOST_LINK_P0 BIT(8) +#define EXYNOS_4x12_URSTCON_HOST_LINK_P1 BIT(9) +#define EXYNOS_4x12_URSTCON_HOST_LINK_P2 BIT(10) + +/* Isolation, configured in the power management unit */ +#define EXYNOS_4x12_USB_ISOL_OFFSET 0x704 +#define EXYNOS_4x12_USB_ISOL_OTG BIT(0) +#define EXYNOS_4x12_USB_ISOL_HSIC0_OFFSET 0x708 +#define EXYNOS_4x12_USB_ISOL_HSIC0 BIT(0) +#define EXYNOS_4x12_USB_ISOL_HSIC1_OFFSET 0x70c +#define EXYNOS_4x12_USB_ISOL_HSIC1 BIT(0) + +/* Mode switching SUB Device <-> Host */ +#define EXYNOS_4x12_MODE_SWITCH_OFFSET 0x21c +#define EXYNOS_4x12_MODE_SWITCH_MASK 1 +#define EXYNOS_4x12_MODE_SWITCH_DEVICE 0 +#define EXYNOS_4x12_MODE_SWITCH_HOST 1 + +enum exynos4x12_phy_id { + EXYNOS4x12_DEVICE, + EXYNOS4x12_HOST, + EXYNOS4x12_HSIC0, + EXYNOS4x12_HSIC1, + EXYNOS4x12_NUM_PHYS, +}; + +/* + * exynos4x12_rate_to_clk() converts the supplied clock rate to the value that + * can be written to the phy register. + */ +static int exynos4x12_rate_to_clk(unsigned long rate, u32 *reg) +{ + /* EXYNOS_4x12_UPHYCLK_PHYFSEL_MASK */ + + switch (rate) { + case 9600 * KHZ: + *reg = EXYNOS_4x12_UPHYCLK_PHYFSEL_9MHZ6; + break; + case 10 * MHZ: + *reg = EXYNOS_4x12_UPHYCLK_PHYFSEL_10MHZ; + break; + case 12 * MHZ: + *reg = EXYNOS_4x12_UPHYCLK_PHYFSEL_12MHZ; + break; + case 19200 * KHZ: + *reg = EXYNOS_4x12_UPHYCLK_PHYFSEL_19MHZ2; + break; + case 20 * MHZ: + *reg = EXYNOS_4x12_UPHYCLK_PHYFSEL_20MHZ; + break; + case 24 * MHZ: + *reg = EXYNOS_4x12_UPHYCLK_PHYFSEL_24MHZ; + break; + case 50 * MHZ: + *reg = EXYNOS_4x12_UPHYCLK_PHYFSEL_50MHZ; + break; + default: + return -EINVAL; + } + + return 0; +} + +static void exynos4x12_isol(struct samsung_usb2_phy_instance *inst, bool on) +{ + struct samsung_usb2_phy_driver *drv = inst->drv; + u32 offset; + u32 mask; + + switch (inst->cfg->id) { + case EXYNOS4x12_DEVICE: + case EXYNOS4x12_HOST: + offset = EXYNOS_4x12_USB_ISOL_OFFSET; + mask = EXYNOS_4x12_USB_ISOL_OTG; + break; + case EXYNOS4x12_HSIC0: + offset = EXYNOS_4x12_USB_ISOL_HSIC0_OFFSET; + mask = EXYNOS_4x12_USB_ISOL_HSIC0; + break; + case EXYNOS4x12_HSIC1: + offset = EXYNOS_4x12_USB_ISOL_HSIC1_OFFSET; + mask = EXYNOS_4x12_USB_ISOL_HSIC1; + break; + default: + return; + }; + + regmap_update_bits(drv->reg_pmu, offset, mask, on ? 0 : mask); +} + +static void exynos4x12_setup_clk(struct samsung_usb2_phy_instance *inst) +{ + struct samsung_usb2_phy_driver *drv = inst->drv; + u32 clk; + + clk = readl(drv->reg_phy + EXYNOS_4x12_UPHYCLK); + clk &= ~EXYNOS_4x12_UPHYCLK_PHYFSEL_MASK; + clk |= drv->ref_reg_val << EXYNOS_4x12_UPHYCLK_PHYFSEL_OFFSET; + writel(clk, drv->reg_phy + EXYNOS_4x12_UPHYCLK); +} + +static void exynos4x12_phy_pwr(struct samsung_usb2_phy_instance *inst, bool on) +{ + struct samsung_usb2_phy_driver *drv = inst->drv; + u32 rstbits = 0; + u32 phypwr = 0; + u32 rst; + u32 pwr; + u32 mode = 0; + u32 switch_mode = 0; + + switch (inst->cfg->id) { + case EXYNOS4x12_DEVICE: + phypwr = EXYNOS_4x12_UPHYPWR_PHY0; + rstbits = EXYNOS_4x12_URSTCON_PHY0; + mode = EXYNOS_4x12_MODE_SWITCH_DEVICE; + switch_mode = 1; + break; + case EXYNOS4x12_HOST: + phypwr = EXYNOS_4x12_UPHYPWR_PHY1; + rstbits = EXYNOS_4x12_URSTCON_HOST_PHY; + mode = EXYNOS_4x12_MODE_SWITCH_HOST; + switch_mode = 1; + break; + case EXYNOS4x12_HSIC0: + phypwr = EXYNOS_4x12_UPHYPWR_HSIC0; + rstbits = EXYNOS_4x12_URSTCON_HSIC1 | + EXYNOS_4x12_URSTCON_HOST_LINK_P0 | + EXYNOS_4x12_URSTCON_HOST_PHY; + break; + case EXYNOS4x12_HSIC1: + phypwr = EXYNOS_4x12_UPHYPWR_HSIC1; + rstbits = EXYNOS_4x12_URSTCON_HSIC1 | + EXYNOS_4x12_URSTCON_HOST_LINK_P1; + break; + }; + + if (on) { + if (switch_mode) + regmap_update_bits(drv->reg_sys, + EXYNOS_4x12_MODE_SWITCH_OFFSET, + EXYNOS_4x12_MODE_SWITCH_MASK, mode); + + pwr = readl(drv->reg_phy + EXYNOS_4x12_UPHYPWR); + pwr &= ~phypwr; + writel(pwr, drv->reg_phy + EXYNOS_4x12_UPHYPWR); + + rst = readl(drv->reg_phy + EXYNOS_4x12_UPHYRST); + rst |= rstbits; + writel(rst, drv->reg_phy + EXYNOS_4x12_UPHYRST); + udelay(10); + rst &= ~rstbits; + writel(rst, drv->reg_phy + EXYNOS_4x12_UPHYRST); + /* The following delay is necessary for the reset sequence to be + * completed */ + udelay(80); + } else { + pwr = readl(drv->reg_phy + EXYNOS_4x12_UPHYPWR); + pwr |= phypwr; + writel(pwr, drv->reg_phy + EXYNOS_4x12_UPHYPWR); + } +} + +static int exynos4x12_power_on(struct samsung_usb2_phy_instance *inst) +{ + struct samsung_usb2_phy_driver *drv = inst->drv; + + inst->enabled = 1; + exynos4x12_setup_clk(inst); + exynos4x12_phy_pwr(inst, 1); + exynos4x12_isol(inst, 0); + + /* Power on the device, as it is necessary for HSIC to work */ + if (inst->cfg->id == EXYNOS4x12_HSIC0) { + struct samsung_usb2_phy_instance *device = + &drv->instances[EXYNOS4x12_DEVICE]; + exynos4x12_phy_pwr(device, 1); + exynos4x12_isol(device, 0); + } + + return 0; +} + +static int exynos4x12_power_off(struct samsung_usb2_phy_instance *inst) +{ + struct samsung_usb2_phy_driver *drv = inst->drv; + struct samsung_usb2_phy_instance *device = + &drv->instances[EXYNOS4x12_DEVICE]; + + inst->enabled = 0; + exynos4x12_isol(inst, 1); + exynos4x12_phy_pwr(inst, 0); + + if (inst->cfg->id == EXYNOS4x12_HSIC0 && !device->enabled) { + exynos4x12_isol(device, 1); + exynos4x12_phy_pwr(device, 0); + } + + return 0; +} + + +static const struct samsung_usb2_common_phy exynos4x12_phys[] = { + { + .label = "device", + .id = EXYNOS4x12_DEVICE, + .power_on = exynos4x12_power_on, + .power_off = exynos4x12_power_off, + }, + { + .label = "host", + .id = EXYNOS4x12_HOST, + .power_on = exynos4x12_power_on, + .power_off = exynos4x12_power_off, + }, + { + .label = "hsic0", + .id = EXYNOS4x12_HSIC0, + .power_on = exynos4x12_power_on, + .power_off = exynos4x12_power_off, + }, + { + .label = "hsic1", + .id = EXYNOS4x12_HSIC1, + .power_on = exynos4x12_power_on, + .power_off = exynos4x12_power_off, + }, + {}, +}; + +const struct samsung_usb2_phy_config exynos4x12_usb2_phy_config = { + .has_mode_switch = 1, + .num_phys = EXYNOS4x12_NUM_PHYS, + .phys = exynos4x12_phys, + .rate_to_clk = exynos4x12_rate_to_clk, +}; diff --git a/drivers/phy/phy-exynos5250-sata.c b/drivers/phy/phy-exynos5250-sata.c new file mode 100644 index 0000000..c9361b7 --- /dev/null +++ b/drivers/phy/phy-exynos5250-sata.c @@ -0,0 +1,251 @@ +/* + * Samsung SATA SerDes(PHY) driver + * + * Copyright (C) 2013 Samsung Electronics Co., Ltd. + * Authors: Girish K S <ks.giri@samsung.com> + * Yuvaraj Kumar C D <yuvaraj.cd@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/i2c.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/phy/phy.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/spinlock.h> +#include <linux/mfd/syscon.h> + +#define SATAPHY_CONTROL_OFFSET 0x0724 +#define EXYNOS5_SATAPHY_PMU_ENABLE BIT(0) +#define EXYNOS5_SATA_RESET 0x4 +#define RESET_GLOBAL_RST_N BIT(0) +#define RESET_CMN_RST_N BIT(1) +#define RESET_CMN_BLOCK_RST_N BIT(2) +#define RESET_CMN_I2C_RST_N BIT(3) +#define RESET_TX_RX_PIPE_RST_N BIT(4) +#define RESET_TX_RX_BLOCK_RST_N BIT(5) +#define RESET_TX_RX_I2C_RST_N (BIT(6) | BIT(7)) +#define LINK_RESET 0xf0000 +#define EXYNOS5_SATA_MODE0 0x10 +#define SATA_SPD_GEN3 BIT(1) +#define EXYNOS5_SATA_CTRL0 0x14 +#define CTRL0_P0_PHY_CALIBRATED_SEL BIT(9) +#define CTRL0_P0_PHY_CALIBRATED BIT(8) +#define EXYNOS5_SATA_PHSATA_CTRLM 0xe0 +#define PHCTRLM_REF_RATE BIT(1) +#define PHCTRLM_HIGH_SPEED BIT(0) +#define EXYNOS5_SATA_PHSATA_STATM 0xf0 +#define PHSTATM_PLL_LOCKED BIT(0) + +#define PHY_PLL_TIMEOUT (usecs_to_jiffies(1000)) + +struct exynos_sata_phy { + struct phy *phy; + struct clk *phyclk; + void __iomem *regs; + struct regmap *pmureg; + struct i2c_client *client; +}; + +static int wait_for_reg_status(void __iomem *base, u32 reg, u32 checkbit, + u32 status) +{ + unsigned long timeout = jiffies + PHY_PLL_TIMEOUT; + + while (time_before(jiffies, timeout)) { + if ((readl(base + reg) & checkbit) == status) + return 0; + } + + return -EFAULT; +} + +static int exynos_sata_phy_power_on(struct phy *phy) +{ + struct exynos_sata_phy *sata_phy = phy_get_drvdata(phy); + + return regmap_update_bits(sata_phy->pmureg, SATAPHY_CONTROL_OFFSET, + EXYNOS5_SATAPHY_PMU_ENABLE, true); + +} + +static int exynos_sata_phy_power_off(struct phy *phy) +{ + struct exynos_sata_phy *sata_phy = phy_get_drvdata(phy); + + return regmap_update_bits(sata_phy->pmureg, SATAPHY_CONTROL_OFFSET, + EXYNOS5_SATAPHY_PMU_ENABLE, false); + +} + +static int exynos_sata_phy_init(struct phy *phy) +{ + u32 val = 0; + int ret = 0; + u8 buf[] = { 0x3a, 0x0b }; + struct exynos_sata_phy *sata_phy = phy_get_drvdata(phy); + + ret = regmap_update_bits(sata_phy->pmureg, SATAPHY_CONTROL_OFFSET, + EXYNOS5_SATAPHY_PMU_ENABLE, true); + if (ret != 0) + dev_err(&sata_phy->phy->dev, "phy init failed\n"); + + writel(val, sata_phy->regs + EXYNOS5_SATA_RESET); + + val = readl(sata_phy->regs + EXYNOS5_SATA_RESET); + val |= RESET_GLOBAL_RST_N | RESET_CMN_RST_N | RESET_CMN_BLOCK_RST_N + | RESET_CMN_I2C_RST_N | RESET_TX_RX_PIPE_RST_N + | RESET_TX_RX_BLOCK_RST_N | RESET_TX_RX_I2C_RST_N; + writel(val, sata_phy->regs + EXYNOS5_SATA_RESET); + + val = readl(sata_phy->regs + EXYNOS5_SATA_RESET); + val |= LINK_RESET; + writel(val, sata_phy->regs + EXYNOS5_SATA_RESET); + + val = readl(sata_phy->regs + EXYNOS5_SATA_RESET); + val |= RESET_CMN_RST_N; + writel(val, sata_phy->regs + EXYNOS5_SATA_RESET); + + val = readl(sata_phy->regs + EXYNOS5_SATA_PHSATA_CTRLM); + val &= ~PHCTRLM_REF_RATE; + writel(val, sata_phy->regs + EXYNOS5_SATA_PHSATA_CTRLM); + + /* High speed enable for Gen3 */ + val = readl(sata_phy->regs + EXYNOS5_SATA_PHSATA_CTRLM); + val |= PHCTRLM_HIGH_SPEED; + writel(val, sata_phy->regs + EXYNOS5_SATA_PHSATA_CTRLM); + + val = readl(sata_phy->regs + EXYNOS5_SATA_CTRL0); + val |= CTRL0_P0_PHY_CALIBRATED_SEL | CTRL0_P0_PHY_CALIBRATED; + writel(val, sata_phy->regs + EXYNOS5_SATA_CTRL0); + + val = readl(sata_phy->regs + EXYNOS5_SATA_MODE0); + val |= SATA_SPD_GEN3; + writel(val, sata_phy->regs + EXYNOS5_SATA_MODE0); + + ret = i2c_master_send(sata_phy->client, buf, sizeof(buf)); + if (ret < 0) + return ret; + + /* release cmu reset */ + val = readl(sata_phy->regs + EXYNOS5_SATA_RESET); + val &= ~RESET_CMN_RST_N; + writel(val, sata_phy->regs + EXYNOS5_SATA_RESET); + + val = readl(sata_phy->regs + EXYNOS5_SATA_RESET); + val |= RESET_CMN_RST_N; + writel(val, sata_phy->regs + EXYNOS5_SATA_RESET); + + ret = wait_for_reg_status(sata_phy->regs, + EXYNOS5_SATA_PHSATA_STATM, + PHSTATM_PLL_LOCKED, 1); + if (ret < 0) + dev_err(&sata_phy->phy->dev, + "PHY PLL locking failed\n"); + return ret; +} + +static struct phy_ops exynos_sata_phy_ops = { + .init = exynos_sata_phy_init, + .power_on = exynos_sata_phy_power_on, + .power_off = exynos_sata_phy_power_off, + .owner = THIS_MODULE, +}; + +static int exynos_sata_phy_probe(struct platform_device *pdev) +{ + struct exynos_sata_phy *sata_phy; + struct device *dev = &pdev->dev; + struct resource *res; + struct phy_provider *phy_provider; + struct device_node *node; + int ret = 0; + + sata_phy = devm_kzalloc(dev, sizeof(*sata_phy), GFP_KERNEL); + if (!sata_phy) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + + sata_phy->regs = devm_ioremap_resource(dev, res); + if (IS_ERR(sata_phy->regs)) + return PTR_ERR(sata_phy->regs); + + sata_phy->pmureg = syscon_regmap_lookup_by_phandle(dev->of_node, + "samsung,syscon-phandle"); + if (IS_ERR(sata_phy->pmureg)) { + dev_err(dev, "syscon regmap lookup failed.\n"); + return PTR_ERR(sata_phy->pmureg); + } + + node = of_parse_phandle(dev->of_node, + "samsung,exynos-sataphy-i2c-phandle", 0); + if (!node) + return -EINVAL; + + sata_phy->client = of_find_i2c_device_by_node(node); + if (!sata_phy->client) + return -EPROBE_DEFER; + + dev_set_drvdata(dev, sata_phy); + + sata_phy->phyclk = devm_clk_get(dev, "sata_phyctrl"); + if (IS_ERR(sata_phy->phyclk)) { + dev_err(dev, "failed to get clk for PHY\n"); + return PTR_ERR(sata_phy->phyclk); + } + + ret = clk_prepare_enable(sata_phy->phyclk); + if (ret < 0) { + dev_err(dev, "failed to enable source clk\n"); + return ret; + } + + sata_phy->phy = devm_phy_create(dev, &exynos_sata_phy_ops, NULL); + if (IS_ERR(sata_phy->phy)) { + clk_disable_unprepare(sata_phy->phyclk); + dev_err(dev, "failed to create PHY\n"); + return PTR_ERR(sata_phy->phy); + } + + phy_set_drvdata(sata_phy->phy, sata_phy); + + phy_provider = devm_of_phy_provider_register(dev, + of_phy_simple_xlate); + if (IS_ERR(phy_provider)) { + clk_disable_unprepare(sata_phy->phyclk); + return PTR_ERR(phy_provider); + } + + return 0; +} + +static const struct of_device_id exynos_sata_phy_of_match[] = { + { .compatible = "samsung,exynos5250-sata-phy" }, + { }, +}; +MODULE_DEVICE_TABLE(of, exynos_sata_phy_of_match); + +static struct platform_driver exynos_sata_phy_driver = { + .probe = exynos_sata_phy_probe, + .driver = { + .of_match_table = exynos_sata_phy_of_match, + .name = "samsung,sata-phy", + .owner = THIS_MODULE, + } +}; +module_platform_driver(exynos_sata_phy_driver); + +MODULE_DESCRIPTION("Samsung SerDes PHY driver"); +MODULE_LICENSE("GPL V2"); +MODULE_AUTHOR("Girish K S <ks.giri@samsung.com>"); +MODULE_AUTHOR("Yuvaraj C D <yuvaraj.cd@samsung.com>"); diff --git a/drivers/phy/phy-exynos5250-usb2.c b/drivers/phy/phy-exynos5250-usb2.c new file mode 100644 index 0000000..94179af --- /dev/null +++ b/drivers/phy/phy-exynos5250-usb2.c @@ -0,0 +1,404 @@ +/* + * Samsung SoC USB 1.1/2.0 PHY driver - Exynos 5250 support + * + * Copyright (C) 2013 Samsung Electronics Co., Ltd. + * Author: Kamil Debski <k.debski@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/delay.h> +#include <linux/io.h> +#include <linux/phy/phy.h> +#include <linux/regmap.h> +#include "phy-samsung-usb2.h" + +/* Exynos USB PHY registers */ +#define EXYNOS_5250_REFCLKSEL_CRYSTAL 0x0 +#define EXYNOS_5250_REFCLKSEL_XO 0x1 +#define EXYNOS_5250_REFCLKSEL_CLKCORE 0x2 + +#define EXYNOS_5250_FSEL_9MHZ6 0x0 +#define EXYNOS_5250_FSEL_10MHZ 0x1 +#define EXYNOS_5250_FSEL_12MHZ 0x2 +#define EXYNOS_5250_FSEL_19MHZ2 0x3 +#define EXYNOS_5250_FSEL_20MHZ 0x4 +#define EXYNOS_5250_FSEL_24MHZ 0x5 +#define EXYNOS_5250_FSEL_50MHZ 0x7 + +/* Normal host */ +#define EXYNOS_5250_HOSTPHYCTRL0 0x0 + +#define EXYNOS_5250_HOSTPHYCTRL0_PHYSWRSTALL BIT(31) +#define EXYNOS_5250_HOSTPHYCTRL0_REFCLKSEL_SHIFT 19 +#define EXYNOS_5250_HOSTPHYCTRL0_REFCLKSEL_MASK \ + (0x3 << EXYNOS_5250_HOSTPHYCTRL0_REFCLKSEL_SHIFT) +#define EXYNOS_5250_HOSTPHYCTRL0_FSEL_SHIFT 16 +#define EXYNOS_5250_HOSTPHYCTRL0_FSEL_MASK \ + (0x7 << EXYNOS_5250_HOSTPHYCTRL0_FSEL_SHIFT) +#define EXYNOS_5250_HOSTPHYCTRL0_TESTBURNIN BIT(11) +#define EXYNOS_5250_HOSTPHYCTRL0_RETENABLE BIT(10) +#define EXYNOS_5250_HOSTPHYCTRL0_COMMON_ON_N BIT(9) +#define EXYNOS_5250_HOSTPHYCTRL0_VATESTENB_MASK (0x3 << 7) +#define EXYNOS_5250_HOSTPHYCTRL0_VATESTENB_DUAL (0x0 << 7) +#define EXYNOS_5250_HOSTPHYCTRL0_VATESTENB_ID0 (0x1 << 7) +#define EXYNOS_5250_HOSTPHYCTRL0_VATESTENB_ANALOGTEST (0x2 << 7) +#define EXYNOS_5250_HOSTPHYCTRL0_SIDDQ BIT(6) +#define EXYNOS_5250_HOSTPHYCTRL0_FORCESLEEP BIT(5) +#define EXYNOS_5250_HOSTPHYCTRL0_FORCESUSPEND BIT(4) +#define EXYNOS_5250_HOSTPHYCTRL0_WORDINTERFACE BIT(3) +#define EXYNOS_5250_HOSTPHYCTRL0_UTMISWRST BIT(2) +#define EXYNOS_5250_HOSTPHYCTRL0_LINKSWRST BIT(1) +#define EXYNOS_5250_HOSTPHYCTRL0_PHYSWRST BIT(0) + +/* HSIC0 & HSIC1 */ +#define EXYNOS_5250_HSICPHYCTRL1 0x10 +#define EXYNOS_5250_HSICPHYCTRL2 0x20 + +#define EXYNOS_5250_HSICPHYCTRLX_REFCLKSEL_MASK (0x3 << 23) +#define EXYNOS_5250_HSICPHYCTRLX_REFCLKSEL_DEFAULT (0x2 << 23) +#define EXYNOS_5250_HSICPHYCTRLX_REFCLKDIV_MASK (0x7f << 16) +#define EXYNOS_5250_HSICPHYCTRLX_REFCLKDIV_12 (0x24 << 16) +#define EXYNOS_5250_HSICPHYCTRLX_REFCLKDIV_15 (0x1c << 16) +#define EXYNOS_5250_HSICPHYCTRLX_REFCLKDIV_16 (0x1a << 16) +#define EXYNOS_5250_HSICPHYCTRLX_REFCLKDIV_19_2 (0x15 << 16) +#define EXYNOS_5250_HSICPHYCTRLX_REFCLKDIV_20 (0x14 << 16) +#define EXYNOS_5250_HSICPHYCTRLX_SIDDQ BIT(6) +#define EXYNOS_5250_HSICPHYCTRLX_FORCESLEEP BIT(5) +#define EXYNOS_5250_HSICPHYCTRLX_FORCESUSPEND BIT(4) +#define EXYNOS_5250_HSICPHYCTRLX_WORDINTERFACE BIT(3) +#define EXYNOS_5250_HSICPHYCTRLX_UTMISWRST BIT(2) +#define EXYNOS_5250_HSICPHYCTRLX_PHYSWRST BIT(0) + +/* EHCI control */ +#define EXYNOS_5250_HOSTEHCICTRL 0x30 +#define EXYNOS_5250_HOSTEHCICTRL_ENAINCRXALIGN BIT(29) +#define EXYNOS_5250_HOSTEHCICTRL_ENAINCR4 BIT(28) +#define EXYNOS_5250_HOSTEHCICTRL_ENAINCR8 BIT(27) +#define EXYNOS_5250_HOSTEHCICTRL_ENAINCR16 BIT(26) +#define EXYNOS_5250_HOSTEHCICTRL_AUTOPPDONOVRCUREN BIT(25) +#define EXYNOS_5250_HOSTEHCICTRL_FLADJVAL0_SHIFT 19 +#define EXYNOS_5250_HOSTEHCICTRL_FLADJVAL0_MASK \ + (0x3f << EXYNOS_5250_HOSTEHCICTRL_FLADJVAL0_SHIFT) +#define EXYNOS_5250_HOSTEHCICTRL_FLADJVAL1_SHIFT 13 +#define EXYNOS_5250_HOSTEHCICTRL_FLADJVAL1_MASK \ + (0x3f << EXYNOS_5250_HOSTEHCICTRL_FLADJVAL1_SHIFT) +#define EXYNOS_5250_HOSTEHCICTRL_FLADJVAL2_SHIFT 7 +#define EXYNOS_5250_HOSTEHCICTRL_FLADJVAL0_MASK \ + (0x3f << EXYNOS_5250_HOSTEHCICTRL_FLADJVAL0_SHIFT) +#define EXYNOS_5250_HOSTEHCICTRL_FLADJVALHOST_SHIFT 1 +#define EXYNOS_5250_HOSTEHCICTRL_FLADJVALHOST_MASK \ + (0x1 << EXYNOS_5250_HOSTEHCICTRL_FLADJVALHOST_SHIFT) +#define EXYNOS_5250_HOSTEHCICTRL_SIMULATIONMODE BIT(0) + +/* OHCI control */ +#define EXYNOS_5250_HOSTOHCICTRL 0x34 +#define EXYNOS_5250_HOSTOHCICTRL_FRAMELENVAL_SHIFT 1 +#define EXYNOS_5250_HOSTOHCICTRL_FRAMELENVAL_MASK \ + (0x3ff << EXYNOS_5250_HOSTOHCICTRL_FRAMELENVAL_SHIFT) +#define EXYNOS_5250_HOSTOHCICTRL_FRAMELENVALEN BIT(0) + +/* USBOTG */ +#define EXYNOS_5250_USBOTGSYS 0x38 +#define EXYNOS_5250_USBOTGSYS_PHYLINK_SW_RESET BIT(14) +#define EXYNOS_5250_USBOTGSYS_LINK_SW_RST_UOTG BIT(13) +#define EXYNOS_5250_USBOTGSYS_PHY_SW_RST BIT(12) +#define EXYNOS_5250_USBOTGSYS_REFCLKSEL_SHIFT 9 +#define EXYNOS_5250_USBOTGSYS_REFCLKSEL_MASK \ + (0x3 << EXYNOS_5250_USBOTGSYS_REFCLKSEL_SHIFT) +#define EXYNOS_5250_USBOTGSYS_ID_PULLUP BIT(8) +#define EXYNOS_5250_USBOTGSYS_COMMON_ON BIT(7) +#define EXYNOS_5250_USBOTGSYS_FSEL_SHIFT 4 +#define EXYNOS_5250_USBOTGSYS_FSEL_MASK \ + (0x3 << EXYNOS_5250_USBOTGSYS_FSEL_SHIFT) +#define EXYNOS_5250_USBOTGSYS_FORCE_SLEEP BIT(3) +#define EXYNOS_5250_USBOTGSYS_OTGDISABLE BIT(2) +#define EXYNOS_5250_USBOTGSYS_SIDDQ_UOTG BIT(1) +#define EXYNOS_5250_USBOTGSYS_FORCE_SUSPEND BIT(0) + +/* Isolation, configured in the power management unit */ +#define EXYNOS_5250_USB_ISOL_OTG_OFFSET 0x704 +#define EXYNOS_5250_USB_ISOL_OTG BIT(0) +#define EXYNOS_5250_USB_ISOL_HOST_OFFSET 0x708 +#define EXYNOS_5250_USB_ISOL_HOST BIT(0) + +/* Mode swtich register */ +#define EXYNOS_5250_MODE_SWITCH_OFFSET 0x230 +#define EXYNOS_5250_MODE_SWITCH_MASK 1 +#define EXYNOS_5250_MODE_SWITCH_DEVICE 0 +#define EXYNOS_5250_MODE_SWITCH_HOST 1 + +enum exynos4x12_phy_id { + EXYNOS5250_DEVICE, + EXYNOS5250_HOST, + EXYNOS5250_HSIC0, + EXYNOS5250_HSIC1, + EXYNOS5250_NUM_PHYS, +}; + +/* + * exynos5250_rate_to_clk() converts the supplied clock rate to the value that + * can be written to the phy register. + */ +static int exynos5250_rate_to_clk(unsigned long rate, u32 *reg) +{ + /* EXYNOS_5250_FSEL_MASK */ + + switch (rate) { + case 9600 * KHZ: + *reg = EXYNOS_5250_FSEL_9MHZ6; + break; + case 10 * MHZ: + *reg = EXYNOS_5250_FSEL_10MHZ; + break; + case 12 * MHZ: + *reg = EXYNOS_5250_FSEL_12MHZ; + break; + case 19200 * KHZ: + *reg = EXYNOS_5250_FSEL_19MHZ2; + break; + case 20 * MHZ: + *reg = EXYNOS_5250_FSEL_20MHZ; + break; + case 24 * MHZ: + *reg = EXYNOS_5250_FSEL_24MHZ; + break; + case 50 * MHZ: + *reg = EXYNOS_5250_FSEL_50MHZ; + break; + default: + return -EINVAL; + } + + return 0; +} + +static void exynos5250_isol(struct samsung_usb2_phy_instance *inst, bool on) +{ + struct samsung_usb2_phy_driver *drv = inst->drv; + u32 offset; + u32 mask; + + switch (inst->cfg->id) { + case EXYNOS5250_DEVICE: + offset = EXYNOS_5250_USB_ISOL_OTG_OFFSET; + mask = EXYNOS_5250_USB_ISOL_OTG; + break; + case EXYNOS5250_HOST: + offset = EXYNOS_5250_USB_ISOL_HOST_OFFSET; + mask = EXYNOS_5250_USB_ISOL_HOST; + break; + default: + return; + }; + + regmap_update_bits(drv->reg_pmu, offset, mask, on ? 0 : mask); +} + +static int exynos5250_power_on(struct samsung_usb2_phy_instance *inst) +{ + struct samsung_usb2_phy_driver *drv = inst->drv; + u32 ctrl0; + u32 otg; + u32 ehci; + u32 ohci; + u32 hsic; + + switch (inst->cfg->id) { + case EXYNOS5250_DEVICE: + regmap_update_bits(drv->reg_sys, + EXYNOS_5250_MODE_SWITCH_OFFSET, + EXYNOS_5250_MODE_SWITCH_MASK, + EXYNOS_5250_MODE_SWITCH_DEVICE); + + /* OTG configuration */ + otg = readl(drv->reg_phy + EXYNOS_5250_USBOTGSYS); + /* The clock */ + otg &= ~EXYNOS_5250_USBOTGSYS_FSEL_MASK; + otg |= drv->ref_reg_val << EXYNOS_5250_USBOTGSYS_FSEL_SHIFT; + /* Reset */ + otg &= ~(EXYNOS_5250_USBOTGSYS_FORCE_SUSPEND | + EXYNOS_5250_USBOTGSYS_FORCE_SLEEP | + EXYNOS_5250_USBOTGSYS_SIDDQ_UOTG); + otg |= EXYNOS_5250_USBOTGSYS_PHY_SW_RST | + EXYNOS_5250_USBOTGSYS_PHYLINK_SW_RESET | + EXYNOS_5250_USBOTGSYS_LINK_SW_RST_UOTG | + EXYNOS_5250_USBOTGSYS_OTGDISABLE; + /* Ref clock */ + otg &= ~EXYNOS_5250_USBOTGSYS_REFCLKSEL_MASK; + otg |= EXYNOS_5250_REFCLKSEL_CLKCORE << + EXYNOS_5250_USBOTGSYS_REFCLKSEL_SHIFT; + writel(otg, drv->reg_phy + EXYNOS_5250_USBOTGSYS); + udelay(100); + otg &= ~(EXYNOS_5250_USBOTGSYS_PHY_SW_RST | + EXYNOS_5250_USBOTGSYS_LINK_SW_RST_UOTG | + EXYNOS_5250_USBOTGSYS_PHYLINK_SW_RESET | + EXYNOS_5250_USBOTGSYS_OTGDISABLE); + writel(otg, drv->reg_phy + EXYNOS_5250_USBOTGSYS); + + + break; + case EXYNOS5250_HOST: + case EXYNOS5250_HSIC0: + case EXYNOS5250_HSIC1: + /* Host registers configuration */ + ctrl0 = readl(drv->reg_phy + EXYNOS_5250_HOSTPHYCTRL0); + /* The clock */ + ctrl0 &= ~EXYNOS_5250_HOSTPHYCTRL0_FSEL_MASK; + ctrl0 |= drv->ref_reg_val << + EXYNOS_5250_HOSTPHYCTRL0_FSEL_SHIFT; + + /* Reset */ + ctrl0 &= ~(EXYNOS_5250_HOSTPHYCTRL0_PHYSWRST | + EXYNOS_5250_HOSTPHYCTRL0_PHYSWRSTALL | + EXYNOS_5250_HOSTPHYCTRL0_SIDDQ | + EXYNOS_5250_HOSTPHYCTRL0_FORCESUSPEND | + EXYNOS_5250_HOSTPHYCTRL0_FORCESLEEP); + ctrl0 |= EXYNOS_5250_HOSTPHYCTRL0_LINKSWRST | + EXYNOS_5250_HOSTPHYCTRL0_UTMISWRST | + EXYNOS_5250_HOSTPHYCTRL0_COMMON_ON_N; + writel(ctrl0, drv->reg_phy + EXYNOS_5250_HOSTPHYCTRL0); + udelay(10); + ctrl0 &= ~(EXYNOS_5250_HOSTPHYCTRL0_LINKSWRST | + EXYNOS_5250_HOSTPHYCTRL0_UTMISWRST); + writel(ctrl0, drv->reg_phy + EXYNOS_5250_HOSTPHYCTRL0); + + /* OTG configuration */ + otg = readl(drv->reg_phy + EXYNOS_5250_USBOTGSYS); + /* The clock */ + otg &= ~EXYNOS_5250_USBOTGSYS_FSEL_MASK; + otg |= drv->ref_reg_val << EXYNOS_5250_USBOTGSYS_FSEL_SHIFT; + /* Reset */ + otg &= ~(EXYNOS_5250_USBOTGSYS_FORCE_SUSPEND | + EXYNOS_5250_USBOTGSYS_FORCE_SLEEP | + EXYNOS_5250_USBOTGSYS_SIDDQ_UOTG); + otg |= EXYNOS_5250_USBOTGSYS_PHY_SW_RST | + EXYNOS_5250_USBOTGSYS_PHYLINK_SW_RESET | + EXYNOS_5250_USBOTGSYS_LINK_SW_RST_UOTG | + EXYNOS_5250_USBOTGSYS_OTGDISABLE; + /* Ref clock */ + otg &= ~EXYNOS_5250_USBOTGSYS_REFCLKSEL_MASK; + otg |= EXYNOS_5250_REFCLKSEL_CLKCORE << + EXYNOS_5250_USBOTGSYS_REFCLKSEL_SHIFT; + writel(otg, drv->reg_phy + EXYNOS_5250_USBOTGSYS); + udelay(10); + otg &= ~(EXYNOS_5250_USBOTGSYS_PHY_SW_RST | + EXYNOS_5250_USBOTGSYS_LINK_SW_RST_UOTG | + EXYNOS_5250_USBOTGSYS_PHYLINK_SW_RESET); + + /* HSIC phy configuration */ + hsic = (EXYNOS_5250_HSICPHYCTRLX_REFCLKDIV_12 | + EXYNOS_5250_HSICPHYCTRLX_REFCLKSEL_DEFAULT | + EXYNOS_5250_HSICPHYCTRLX_PHYSWRST); + writel(hsic, drv->reg_phy + EXYNOS_5250_HSICPHYCTRL1); + writel(hsic, drv->reg_phy + EXYNOS_5250_HSICPHYCTRL2); + udelay(10); + hsic &= ~EXYNOS_5250_HSICPHYCTRLX_PHYSWRST; + writel(hsic, drv->reg_phy + EXYNOS_5250_HSICPHYCTRL1); + writel(hsic, drv->reg_phy + EXYNOS_5250_HSICPHYCTRL2); + /* The following delay is necessary for the reset sequence to be + * completed */ + udelay(80); + + /* Enable EHCI DMA burst */ + ehci = readl(drv->reg_phy + EXYNOS_5250_HOSTEHCICTRL); + ehci |= EXYNOS_5250_HOSTEHCICTRL_ENAINCRXALIGN | + EXYNOS_5250_HOSTEHCICTRL_ENAINCR4 | + EXYNOS_5250_HOSTEHCICTRL_ENAINCR8 | + EXYNOS_5250_HOSTEHCICTRL_ENAINCR16; + writel(ehci, drv->reg_phy + EXYNOS_5250_HOSTEHCICTRL); + + /* OHCI settings */ + ohci = readl(drv->reg_phy + EXYNOS_5250_HOSTOHCICTRL); + /* Following code is based on the old driver */ + ohci |= 0x1 << 3; + writel(ohci, drv->reg_phy + EXYNOS_5250_HOSTOHCICTRL); + + break; + } + inst->enabled = 1; + exynos5250_isol(inst, 0); + + return 0; +} + +static int exynos5250_power_off(struct samsung_usb2_phy_instance *inst) +{ + struct samsung_usb2_phy_driver *drv = inst->drv; + u32 ctrl0; + u32 otg; + u32 hsic; + + inst->enabled = 0; + exynos5250_isol(inst, 1); + + switch (inst->cfg->id) { + case EXYNOS5250_DEVICE: + otg = readl(drv->reg_phy + EXYNOS_5250_USBOTGSYS); + otg |= (EXYNOS_5250_USBOTGSYS_FORCE_SUSPEND | + EXYNOS_5250_USBOTGSYS_SIDDQ_UOTG | + EXYNOS_5250_USBOTGSYS_FORCE_SLEEP); + writel(otg, drv->reg_phy + EXYNOS_5250_USBOTGSYS); + break; + case EXYNOS5250_HOST: + ctrl0 = readl(drv->reg_phy + EXYNOS_5250_HOSTPHYCTRL0); + ctrl0 |= (EXYNOS_5250_HOSTPHYCTRL0_SIDDQ | + EXYNOS_5250_HOSTPHYCTRL0_FORCESUSPEND | + EXYNOS_5250_HOSTPHYCTRL0_FORCESLEEP | + EXYNOS_5250_HOSTPHYCTRL0_PHYSWRST | + EXYNOS_5250_HOSTPHYCTRL0_PHYSWRSTALL); + writel(ctrl0, drv->reg_phy + EXYNOS_5250_HOSTPHYCTRL0); + break; + case EXYNOS5250_HSIC0: + case EXYNOS5250_HSIC1: + hsic = (EXYNOS_5250_HSICPHYCTRLX_REFCLKDIV_12 | + EXYNOS_5250_HSICPHYCTRLX_REFCLKSEL_DEFAULT | + EXYNOS_5250_HSICPHYCTRLX_SIDDQ | + EXYNOS_5250_HSICPHYCTRLX_FORCESLEEP | + EXYNOS_5250_HSICPHYCTRLX_FORCESUSPEND + ); + writel(hsic, drv->reg_phy + EXYNOS_5250_HSICPHYCTRL1); + writel(hsic, drv->reg_phy + EXYNOS_5250_HSICPHYCTRL2); + break; + } + + return 0; +} + + +static const struct samsung_usb2_common_phy exynos5250_phys[] = { + { + .label = "device", + .id = EXYNOS5250_DEVICE, + .power_on = exynos5250_power_on, + .power_off = exynos5250_power_off, + }, + { + .label = "host", + .id = EXYNOS5250_HOST, + .power_on = exynos5250_power_on, + .power_off = exynos5250_power_off, + }, + { + .label = "hsic0", + .id = EXYNOS5250_HSIC0, + .power_on = exynos5250_power_on, + .power_off = exynos5250_power_off, + }, + { + .label = "hsic1", + .id = EXYNOS5250_HSIC1, + .power_on = exynos5250_power_on, + .power_off = exynos5250_power_off, + }, + {}, +}; + +const struct samsung_usb2_phy_config exynos5250_usb2_phy_config = { + .has_mode_switch = 1, + .num_phys = EXYNOS5250_NUM_PHYS, + .phys = exynos5250_phys, + .rate_to_clk = exynos5250_rate_to_clk, +}; diff --git a/drivers/usb/phy/phy-omap-control.c b/drivers/phy/phy-omap-control.c index e725318..311b4f9 100644 --- a/drivers/usb/phy/phy-omap-control.c +++ b/drivers/phy/phy-omap-control.c @@ -1,5 +1,5 @@ /* - * omap-control-usb.c - The USB part of control module. + * omap-control-phy.c - The PHY part of control module. * * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com * This program is free software; you can redistribute it and/or modify @@ -24,36 +24,36 @@ #include <linux/err.h> #include <linux/io.h> #include <linux/clk.h> -#include <linux/usb/omap_control_usb.h> +#include <linux/phy/omap_control_phy.h> /** - * omap_control_usb_phy_power - power on/off the phy using control module reg + * omap_control_phy_power - power on/off the phy using control module reg * @dev: the control module device * @on: 0 or 1, based on powering on or off the PHY */ -void omap_control_usb_phy_power(struct device *dev, int on) +void omap_control_phy_power(struct device *dev, int on) { u32 val; unsigned long rate; - struct omap_control_usb *control_usb; + struct omap_control_phy *control_phy; if (IS_ERR(dev) || !dev) { pr_err("%s: invalid device\n", __func__); return; } - control_usb = dev_get_drvdata(dev); - if (!control_usb) { - dev_err(dev, "%s: invalid control usb device\n", __func__); + control_phy = dev_get_drvdata(dev); + if (!control_phy) { + dev_err(dev, "%s: invalid control phy device\n", __func__); return; } - if (control_usb->type == OMAP_CTRL_TYPE_OTGHS) + if (control_phy->type == OMAP_CTRL_TYPE_OTGHS) return; - val = readl(control_usb->power); + val = readl(control_phy->power); - switch (control_usb->type) { + switch (control_phy->type) { case OMAP_CTRL_TYPE_USB2: if (on) val &= ~OMAP_CTRL_DEV_PHY_PD; @@ -62,19 +62,20 @@ void omap_control_usb_phy_power(struct device *dev, int on) break; case OMAP_CTRL_TYPE_PIPE3: - rate = clk_get_rate(control_usb->sys_clk); + rate = clk_get_rate(control_phy->sys_clk); rate = rate/1000000; if (on) { - val &= ~(OMAP_CTRL_USB_PWRCTL_CLK_CMD_MASK | - OMAP_CTRL_USB_PWRCTL_CLK_FREQ_MASK); - val |= OMAP_CTRL_USB3_PHY_TX_RX_POWERON << - OMAP_CTRL_USB_PWRCTL_CLK_CMD_SHIFT; - val |= rate << OMAP_CTRL_USB_PWRCTL_CLK_FREQ_SHIFT; + val &= ~(OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_MASK | + OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_MASK); + val |= OMAP_CTRL_PIPE3_PHY_TX_RX_POWERON << + OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT; + val |= rate << + OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_SHIFT; } else { - val &= ~OMAP_CTRL_USB_PWRCTL_CLK_CMD_MASK; - val |= OMAP_CTRL_USB3_PHY_TX_RX_POWEROFF << - OMAP_CTRL_USB_PWRCTL_CLK_CMD_SHIFT; + val &= ~OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_MASK; + val |= OMAP_CTRL_PIPE3_PHY_TX_RX_POWEROFF << + OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT; } break; @@ -100,66 +101,66 @@ void omap_control_usb_phy_power(struct device *dev, int on) break; default: dev_err(dev, "%s: type %d not recognized\n", - __func__, control_usb->type); + __func__, control_phy->type); break; } - writel(val, control_usb->power); + writel(val, control_phy->power); } -EXPORT_SYMBOL_GPL(omap_control_usb_phy_power); +EXPORT_SYMBOL_GPL(omap_control_phy_power); /** * omap_control_usb_host_mode - set AVALID, VBUSVALID and ID pin in grounded - * @ctrl_usb: struct omap_control_usb * + * @ctrl_phy: struct omap_control_phy * * * Writes to the mailbox register to notify the usb core that a usb * device has been connected. */ -static void omap_control_usb_host_mode(struct omap_control_usb *ctrl_usb) +static void omap_control_usb_host_mode(struct omap_control_phy *ctrl_phy) { u32 val; - val = readl(ctrl_usb->otghs_control); + val = readl(ctrl_phy->otghs_control); val &= ~(OMAP_CTRL_DEV_IDDIG | OMAP_CTRL_DEV_SESSEND); val |= OMAP_CTRL_DEV_AVALID | OMAP_CTRL_DEV_VBUSVALID; - writel(val, ctrl_usb->otghs_control); + writel(val, ctrl_phy->otghs_control); } /** * omap_control_usb_device_mode - set AVALID, VBUSVALID and ID pin in high * impedance - * @ctrl_usb: struct omap_control_usb * + * @ctrl_phy: struct omap_control_phy * * * Writes to the mailbox register to notify the usb core that it has been * connected to a usb host. */ -static void omap_control_usb_device_mode(struct omap_control_usb *ctrl_usb) +static void omap_control_usb_device_mode(struct omap_control_phy *ctrl_phy) { u32 val; - val = readl(ctrl_usb->otghs_control); + val = readl(ctrl_phy->otghs_control); val &= ~OMAP_CTRL_DEV_SESSEND; val |= OMAP_CTRL_DEV_IDDIG | OMAP_CTRL_DEV_AVALID | OMAP_CTRL_DEV_VBUSVALID; - writel(val, ctrl_usb->otghs_control); + writel(val, ctrl_phy->otghs_control); } /** * omap_control_usb_set_sessionend - Enable SESSIONEND and IDIG to high * impedance - * @ctrl_usb: struct omap_control_usb * + * @ctrl_phy: struct omap_control_phy * * * Writes to the mailbox register to notify the usb core it's now in * disconnected state. */ -static void omap_control_usb_set_sessionend(struct omap_control_usb *ctrl_usb) +static void omap_control_usb_set_sessionend(struct omap_control_phy *ctrl_phy) { u32 val; - val = readl(ctrl_usb->otghs_control); + val = readl(ctrl_phy->otghs_control); val &= ~(OMAP_CTRL_DEV_AVALID | OMAP_CTRL_DEV_VBUSVALID); val |= OMAP_CTRL_DEV_IDDIG | OMAP_CTRL_DEV_SESSEND; - writel(val, ctrl_usb->otghs_control); + writel(val, ctrl_phy->otghs_control); } /** @@ -174,30 +175,30 @@ static void omap_control_usb_set_sessionend(struct omap_control_usb *ctrl_usb) void omap_control_usb_set_mode(struct device *dev, enum omap_control_usb_mode mode) { - struct omap_control_usb *ctrl_usb; + struct omap_control_phy *ctrl_phy; if (IS_ERR(dev) || !dev) return; - ctrl_usb = dev_get_drvdata(dev); + ctrl_phy = dev_get_drvdata(dev); - if (!ctrl_usb) { - dev_err(dev, "Invalid control usb device\n"); + if (!ctrl_phy) { + dev_err(dev, "Invalid control phy device\n"); return; } - if (ctrl_usb->type != OMAP_CTRL_TYPE_OTGHS) + if (ctrl_phy->type != OMAP_CTRL_TYPE_OTGHS) return; switch (mode) { case USB_MODE_HOST: - omap_control_usb_host_mode(ctrl_usb); + omap_control_usb_host_mode(ctrl_phy); break; case USB_MODE_DEVICE: - omap_control_usb_device_mode(ctrl_usb); + omap_control_usb_device_mode(ctrl_phy); break; case USB_MODE_DISCONNECT: - omap_control_usb_set_sessionend(ctrl_usb); + omap_control_usb_set_sessionend(ctrl_phy); break; default: dev_vdbg(dev, "invalid omap control usb mode\n"); @@ -207,13 +208,13 @@ EXPORT_SYMBOL_GPL(omap_control_usb_set_mode); #ifdef CONFIG_OF -static const enum omap_control_usb_type otghs_data = OMAP_CTRL_TYPE_OTGHS; -static const enum omap_control_usb_type usb2_data = OMAP_CTRL_TYPE_USB2; -static const enum omap_control_usb_type pipe3_data = OMAP_CTRL_TYPE_PIPE3; -static const enum omap_control_usb_type dra7usb2_data = OMAP_CTRL_TYPE_DRA7USB2; -static const enum omap_control_usb_type am437usb2_data = OMAP_CTRL_TYPE_AM437USB2; +static const enum omap_control_phy_type otghs_data = OMAP_CTRL_TYPE_OTGHS; +static const enum omap_control_phy_type usb2_data = OMAP_CTRL_TYPE_USB2; +static const enum omap_control_phy_type pipe3_data = OMAP_CTRL_TYPE_PIPE3; +static const enum omap_control_phy_type dra7usb2_data = OMAP_CTRL_TYPE_DRA7USB2; +static const enum omap_control_phy_type am437usb2_data = OMAP_CTRL_TYPE_AM437USB2; -static const struct of_device_id omap_control_usb_id_table[] = { +static const struct of_device_id omap_control_phy_id_table[] = { { .compatible = "ti,control-phy-otghs", .data = &otghs_data, @@ -227,93 +228,93 @@ static const struct of_device_id omap_control_usb_id_table[] = { .data = &pipe3_data, }, { - .compatible = "ti,control-phy-dra7usb2", + .compatible = "ti,control-phy-usb2-dra7", .data = &dra7usb2_data, }, { - .compatible = "ti,control-phy-am437usb2", + .compatible = "ti,control-phy-usb2-am437", .data = &am437usb2_data, }, {}, }; -MODULE_DEVICE_TABLE(of, omap_control_usb_id_table); +MODULE_DEVICE_TABLE(of, omap_control_phy_id_table); #endif -static int omap_control_usb_probe(struct platform_device *pdev) +static int omap_control_phy_probe(struct platform_device *pdev) { struct resource *res; const struct of_device_id *of_id; - struct omap_control_usb *control_usb; + struct omap_control_phy *control_phy; - of_id = of_match_device(of_match_ptr(omap_control_usb_id_table), - &pdev->dev); + of_id = of_match_device(of_match_ptr(omap_control_phy_id_table), + &pdev->dev); if (!of_id) return -EINVAL; - control_usb = devm_kzalloc(&pdev->dev, sizeof(*control_usb), + control_phy = devm_kzalloc(&pdev->dev, sizeof(*control_phy), GFP_KERNEL); - if (!control_usb) { - dev_err(&pdev->dev, "unable to alloc memory for control usb\n"); + if (!control_phy) { + dev_err(&pdev->dev, "unable to alloc memory for control phy\n"); return -ENOMEM; } - control_usb->dev = &pdev->dev; - control_usb->type = *(enum omap_control_usb_type *)of_id->data; + control_phy->dev = &pdev->dev; + control_phy->type = *(enum omap_control_phy_type *)of_id->data; - if (control_usb->type == OMAP_CTRL_TYPE_OTGHS) { + if (control_phy->type == OMAP_CTRL_TYPE_OTGHS) { res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "otghs_control"); - control_usb->otghs_control = devm_ioremap_resource( + control_phy->otghs_control = devm_ioremap_resource( &pdev->dev, res); - if (IS_ERR(control_usb->otghs_control)) - return PTR_ERR(control_usb->otghs_control); + if (IS_ERR(control_phy->otghs_control)) + return PTR_ERR(control_phy->otghs_control); } else { res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "power"); - control_usb->power = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(control_usb->power)) { + control_phy->power = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(control_phy->power)) { dev_err(&pdev->dev, "Couldn't get power register\n"); - return PTR_ERR(control_usb->power); + return PTR_ERR(control_phy->power); } } - if (control_usb->type == OMAP_CTRL_TYPE_PIPE3) { - control_usb->sys_clk = devm_clk_get(control_usb->dev, + if (control_phy->type == OMAP_CTRL_TYPE_PIPE3) { + control_phy->sys_clk = devm_clk_get(control_phy->dev, "sys_clkin"); - if (IS_ERR(control_usb->sys_clk)) { + if (IS_ERR(control_phy->sys_clk)) { pr_err("%s: unable to get sys_clkin\n", __func__); return -EINVAL; } } - dev_set_drvdata(control_usb->dev, control_usb); + dev_set_drvdata(control_phy->dev, control_phy); return 0; } -static struct platform_driver omap_control_usb_driver = { - .probe = omap_control_usb_probe, +static struct platform_driver omap_control_phy_driver = { + .probe = omap_control_phy_probe, .driver = { - .name = "omap-control-usb", + .name = "omap-control-phy", .owner = THIS_MODULE, - .of_match_table = of_match_ptr(omap_control_usb_id_table), + .of_match_table = of_match_ptr(omap_control_phy_id_table), }, }; -static int __init omap_control_usb_init(void) +static int __init omap_control_phy_init(void) { - return platform_driver_register(&omap_control_usb_driver); + return platform_driver_register(&omap_control_phy_driver); } -subsys_initcall(omap_control_usb_init); +subsys_initcall(omap_control_phy_init); -static void __exit omap_control_usb_exit(void) +static void __exit omap_control_phy_exit(void) { - platform_driver_unregister(&omap_control_usb_driver); + platform_driver_unregister(&omap_control_phy_driver); } -module_exit(omap_control_usb_exit); +module_exit(omap_control_phy_exit); -MODULE_ALIAS("platform: omap_control_usb"); +MODULE_ALIAS("platform: omap_control_phy"); MODULE_AUTHOR("Texas Instruments Inc."); -MODULE_DESCRIPTION("OMAP Control Module USB Driver"); +MODULE_DESCRIPTION("OMAP Control Module PHY Driver"); MODULE_LICENSE("GPL v2"); diff --git a/drivers/phy/phy-omap-usb2.c b/drivers/phy/phy-omap-usb2.c index 7699752..a2205a8 100644 --- a/drivers/phy/phy-omap-usb2.c +++ b/drivers/phy/phy-omap-usb2.c @@ -21,16 +21,19 @@ #include <linux/slab.h> #include <linux/of.h> #include <linux/io.h> -#include <linux/usb/omap_usb.h> +#include <linux/phy/omap_usb.h> #include <linux/usb/phy_companion.h> #include <linux/clk.h> #include <linux/err.h> #include <linux/pm_runtime.h> #include <linux/delay.h> -#include <linux/usb/omap_control_usb.h> +#include <linux/phy/omap_control_phy.h> #include <linux/phy/phy.h> #include <linux/of_platform.h> +#define USB2PHY_DISCON_BYP_LATCH (1 << 31) +#define USB2PHY_ANA_CONFIG1 0x4c + /** * omap_usb2_set_comparator - links the comparator present in the sytem with * this phy @@ -98,65 +101,116 @@ static int omap_usb_set_peripheral(struct usb_otg *otg, return 0; } -static int omap_usb2_suspend(struct usb_phy *x, int suspend) +static int omap_usb_power_off(struct phy *x) { - struct omap_usb *phy = phy_to_omapusb(x); - int ret; + struct omap_usb *phy = phy_get_drvdata(x); - if (suspend && !phy->is_suspended) { - omap_control_usb_phy_power(phy->control_dev, 0); - pm_runtime_put_sync(phy->dev); - phy->is_suspended = 1; - } else if (!suspend && phy->is_suspended) { - ret = pm_runtime_get_sync(phy->dev); - if (ret < 0) { - dev_err(phy->dev, "get_sync failed with err %d\n", ret); - return ret; - } - omap_control_usb_phy_power(phy->control_dev, 1); - phy->is_suspended = 0; - } + omap_control_phy_power(phy->control_dev, 0); return 0; } -static int omap_usb_power_off(struct phy *x) +static int omap_usb_power_on(struct phy *x) { struct omap_usb *phy = phy_get_drvdata(x); - omap_control_usb_phy_power(phy->control_dev, 0); + omap_control_phy_power(phy->control_dev, 1); return 0; } -static int omap_usb_power_on(struct phy *x) +static int omap_usb_init(struct phy *x) { struct omap_usb *phy = phy_get_drvdata(x); - - omap_control_usb_phy_power(phy->control_dev, 1); + u32 val; + + if (phy->flags & OMAP_USB2_CALIBRATE_FALSE_DISCONNECT) { + /* + * + * Reduce the sensitivity of internal PHY by enabling the + * DISCON_BYP_LATCH of the USB2PHY_ANA_CONFIG1 register. This + * resolves issues with certain devices which can otherwise + * be prone to false disconnects. + * + */ + val = omap_usb_readl(phy->phy_base, USB2PHY_ANA_CONFIG1); + val |= USB2PHY_DISCON_BYP_LATCH; + omap_usb_writel(phy->phy_base, USB2PHY_ANA_CONFIG1, val); + } return 0; } static struct phy_ops ops = { + .init = omap_usb_init, .power_on = omap_usb_power_on, .power_off = omap_usb_power_off, .owner = THIS_MODULE, }; +#ifdef CONFIG_OF +static const struct usb_phy_data omap_usb2_data = { + .label = "omap_usb2", + .flags = OMAP_USB2_HAS_START_SRP | OMAP_USB2_HAS_SET_VBUS, +}; + +static const struct usb_phy_data omap5_usb2_data = { + .label = "omap5_usb2", + .flags = 0, +}; + +static const struct usb_phy_data dra7x_usb2_data = { + .label = "dra7x_usb2", + .flags = OMAP_USB2_CALIBRATE_FALSE_DISCONNECT, +}; + +static const struct usb_phy_data am437x_usb2_data = { + .label = "am437x_usb2", + .flags = 0, +}; + +static const struct of_device_id omap_usb2_id_table[] = { + { + .compatible = "ti,omap-usb2", + .data = &omap_usb2_data, + }, + { + .compatible = "ti,omap5-usb2", + .data = &omap5_usb2_data, + }, + { + .compatible = "ti,dra7x-usb2", + .data = &dra7x_usb2_data, + }, + { + .compatible = "ti,am437x-usb2", + .data = &am437x_usb2_data, + }, + {}, +}; +MODULE_DEVICE_TABLE(of, omap_usb2_id_table); +#endif + static int omap_usb2_probe(struct platform_device *pdev) { struct omap_usb *phy; struct phy *generic_phy; + struct resource *res; struct phy_provider *phy_provider; struct usb_otg *otg; struct device_node *node = pdev->dev.of_node; struct device_node *control_node; struct platform_device *control_pdev; + const struct of_device_id *of_id; + struct usb_phy_data *phy_data; + + of_id = of_match_device(of_match_ptr(omap_usb2_id_table), &pdev->dev); - if (!node) + if (!of_id) return -EINVAL; + phy_data = (struct usb_phy_data *)of_id->data; + phy = devm_kzalloc(&pdev->dev, sizeof(*phy), GFP_KERNEL); if (!phy) { dev_err(&pdev->dev, "unable to allocate memory for USB2 PHY\n"); @@ -172,11 +226,18 @@ static int omap_usb2_probe(struct platform_device *pdev) phy->dev = &pdev->dev; phy->phy.dev = phy->dev; - phy->phy.label = "omap-usb2"; - phy->phy.set_suspend = omap_usb2_suspend; + phy->phy.label = phy_data->label; phy->phy.otg = otg; phy->phy.type = USB_PHY_TYPE_USB2; + if (phy_data->flags & OMAP_USB2_CALIBRATE_FALSE_DISCONNECT) { + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + phy->phy_base = devm_ioremap_resource(&pdev->dev, res); + if (!phy->phy_base) + return -ENOMEM; + phy->flags |= OMAP_USB2_CALIBRATE_FALSE_DISCONNECT; + } + control_node = of_parse_phandle(node, "ctrl-module", 0); if (!control_node) { dev_err(&pdev->dev, "Failed to get control device phandle\n"); @@ -190,14 +251,14 @@ static int omap_usb2_probe(struct platform_device *pdev) } phy->control_dev = &control_pdev->dev; - - phy->is_suspended = 1; - omap_control_usb_phy_power(phy->control_dev, 0); + omap_control_phy_power(phy->control_dev, 0); otg->set_host = omap_usb_set_host; otg->set_peripheral = omap_usb_set_peripheral; - otg->set_vbus = omap_usb_set_vbus; - otg->start_srp = omap_usb_start_srp; + if (phy_data->flags & OMAP_USB2_HAS_SET_VBUS) + otg->set_vbus = omap_usb_set_vbus; + if (phy_data->flags & OMAP_USB2_HAS_START_SRP) + otg->start_srp = omap_usb_start_srp; otg->phy = &phy->phy; platform_set_drvdata(pdev, phy); @@ -297,14 +358,6 @@ static const struct dev_pm_ops omap_usb2_pm_ops = { #define DEV_PM_OPS NULL #endif -#ifdef CONFIG_OF -static const struct of_device_id omap_usb2_id_table[] = { - { .compatible = "ti,omap-usb2" }, - {} -}; -MODULE_DEVICE_TABLE(of, omap_usb2_id_table); -#endif - static struct platform_driver omap_usb2_driver = { .probe = omap_usb2_probe, .remove = omap_usb2_remove, diff --git a/drivers/phy/phy-samsung-usb2.c b/drivers/phy/phy-samsung-usb2.c new file mode 100644 index 0000000..8a8c6bc --- /dev/null +++ b/drivers/phy/phy-samsung-usb2.c @@ -0,0 +1,228 @@ +/* + * Samsung SoC USB 1.1/2.0 PHY driver + * + * Copyright (C) 2013 Samsung Electronics Co., Ltd. + * Author: Kamil Debski <k.debski@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/clk.h> +#include <linux/mfd/syscon.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/phy/phy.h> +#include <linux/platform_device.h> +#include <linux/spinlock.h> +#include "phy-samsung-usb2.h" + +static int samsung_usb2_phy_power_on(struct phy *phy) +{ + struct samsung_usb2_phy_instance *inst = phy_get_drvdata(phy); + struct samsung_usb2_phy_driver *drv = inst->drv; + int ret; + + dev_dbg(drv->dev, "Request to power_on \"%s\" usb phy\n", + inst->cfg->label); + ret = clk_prepare_enable(drv->clk); + if (ret) + goto err_main_clk; + ret = clk_prepare_enable(drv->ref_clk); + if (ret) + goto err_instance_clk; + if (inst->cfg->power_on) { + spin_lock(&drv->lock); + ret = inst->cfg->power_on(inst); + spin_unlock(&drv->lock); + } + + return 0; + +err_instance_clk: + clk_disable_unprepare(drv->clk); +err_main_clk: + return ret; +} + +static int samsung_usb2_phy_power_off(struct phy *phy) +{ + struct samsung_usb2_phy_instance *inst = phy_get_drvdata(phy); + struct samsung_usb2_phy_driver *drv = inst->drv; + int ret = 0; + + dev_dbg(drv->dev, "Request to power_off \"%s\" usb phy\n", + inst->cfg->label); + if (inst->cfg->power_off) { + spin_lock(&drv->lock); + ret = inst->cfg->power_off(inst); + spin_unlock(&drv->lock); + } + clk_disable_unprepare(drv->ref_clk); + clk_disable_unprepare(drv->clk); + return ret; +} + +static struct phy_ops samsung_usb2_phy_ops = { + .power_on = samsung_usb2_phy_power_on, + .power_off = samsung_usb2_phy_power_off, + .owner = THIS_MODULE, +}; + +static struct phy *samsung_usb2_phy_xlate(struct device *dev, + struct of_phandle_args *args) +{ + struct samsung_usb2_phy_driver *drv; + + drv = dev_get_drvdata(dev); + if (!drv) + return ERR_PTR(-EINVAL); + + if (WARN_ON(args->args[0] >= drv->cfg->num_phys)) + return ERR_PTR(-ENODEV); + + return drv->instances[args->args[0]].phy; +} + +static const struct of_device_id samsung_usb2_phy_of_match[] = { +#ifdef CONFIG_PHY_EXYNOS4210_USB2 + { + .compatible = "samsung,exynos4210-usb2-phy", + .data = &exynos4210_usb2_phy_config, + }, +#endif +#ifdef CONFIG_PHY_EXYNOS4X12_USB2 + { + .compatible = "samsung,exynos4x12-usb2-phy", + .data = &exynos4x12_usb2_phy_config, + }, +#endif +#ifdef CONFIG_PHY_EXYNOS5250_USB2 + { + .compatible = "samsung,exynos5250-usb2-phy", + .data = &exynos5250_usb2_phy_config, + }, +#endif + { }, +}; + +static int samsung_usb2_phy_probe(struct platform_device *pdev) +{ + const struct of_device_id *match; + const struct samsung_usb2_phy_config *cfg; + struct device *dev = &pdev->dev; + struct phy_provider *phy_provider; + struct resource *mem; + struct samsung_usb2_phy_driver *drv; + int i, ret; + + if (!pdev->dev.of_node) { + dev_err(dev, "This driver is required to be instantiated from device tree\n"); + return -EINVAL; + } + + match = of_match_node(samsung_usb2_phy_of_match, pdev->dev.of_node); + if (!match) { + dev_err(dev, "of_match_node() failed\n"); + return -EINVAL; + } + cfg = match->data; + + drv = devm_kzalloc(dev, sizeof(struct samsung_usb2_phy_driver) + + cfg->num_phys * sizeof(struct samsung_usb2_phy_instance), + GFP_KERNEL); + if (!drv) + return -ENOMEM; + + dev_set_drvdata(dev, drv); + spin_lock_init(&drv->lock); + + drv->cfg = cfg; + drv->dev = dev; + + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + drv->reg_phy = devm_ioremap_resource(dev, mem); + if (IS_ERR(drv->reg_phy)) { + dev_err(dev, "Failed to map register memory (phy)\n"); + return PTR_ERR(drv->reg_phy); + } + + drv->reg_pmu = syscon_regmap_lookup_by_phandle(pdev->dev.of_node, + "samsung,pmureg-phandle"); + if (IS_ERR(drv->reg_pmu)) { + dev_err(dev, "Failed to map PMU registers (via syscon)\n"); + return PTR_ERR(drv->reg_pmu); + } + + if (drv->cfg->has_mode_switch) { + drv->reg_sys = syscon_regmap_lookup_by_phandle( + pdev->dev.of_node, "samsung,sysreg-phandle"); + if (IS_ERR(drv->reg_sys)) { + dev_err(dev, "Failed to map system registers (via syscon)\n"); + return PTR_ERR(drv->reg_sys); + } + } + + drv->clk = devm_clk_get(dev, "phy"); + if (IS_ERR(drv->clk)) { + dev_err(dev, "Failed to get clock of phy controller\n"); + return PTR_ERR(drv->clk); + } + + drv->ref_clk = devm_clk_get(dev, "ref"); + if (IS_ERR(drv->ref_clk)) { + dev_err(dev, "Failed to get reference clock for the phy controller\n"); + return PTR_ERR(drv->ref_clk); + } + + drv->ref_rate = clk_get_rate(drv->ref_clk); + if (drv->cfg->rate_to_clk) { + ret = drv->cfg->rate_to_clk(drv->ref_rate, &drv->ref_reg_val); + if (ret) + return ret; + } + + for (i = 0; i < drv->cfg->num_phys; i++) { + char *label = drv->cfg->phys[i].label; + struct samsung_usb2_phy_instance *p = &drv->instances[i]; + + dev_dbg(dev, "Creating phy \"%s\"\n", label); + p->phy = devm_phy_create(dev, &samsung_usb2_phy_ops, NULL); + if (IS_ERR(p->phy)) { + dev_err(drv->dev, "Failed to create usb2_phy \"%s\"\n", + label); + return PTR_ERR(p->phy); + } + + p->cfg = &drv->cfg->phys[i]; + p->drv = drv; + phy_set_bus_width(p->phy, 8); + phy_set_drvdata(p->phy, p); + } + + phy_provider = devm_of_phy_provider_register(dev, + samsung_usb2_phy_xlate); + if (IS_ERR(phy_provider)) { + dev_err(drv->dev, "Failed to register phy provider\n"); + return PTR_ERR(phy_provider); + } + + return 0; +} + +static struct platform_driver samsung_usb2_phy_driver = { + .probe = samsung_usb2_phy_probe, + .driver = { + .of_match_table = samsung_usb2_phy_of_match, + .name = "samsung-usb2-phy", + .owner = THIS_MODULE, + } +}; + +module_platform_driver(samsung_usb2_phy_driver); +MODULE_DESCRIPTION("Samsung S5P/EXYNOS SoC USB PHY driver"); +MODULE_AUTHOR("Kamil Debski <k.debski@samsung.com>"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:samsung-usb2-phy"); diff --git a/drivers/phy/phy-samsung-usb2.h b/drivers/phy/phy-samsung-usb2.h new file mode 100644 index 0000000..45b3170 --- /dev/null +++ b/drivers/phy/phy-samsung-usb2.h @@ -0,0 +1,67 @@ +/* + * Samsung SoC USB 1.1/2.0 PHY driver + * + * Copyright (C) 2013 Samsung Electronics Co., Ltd. + * Author: Kamil Debski <k.debski@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _PHY_EXYNOS_USB2_H +#define _PHY_EXYNOS_USB2_H + +#include <linux/clk.h> +#include <linux/phy/phy.h> +#include <linux/device.h> +#include <linux/regmap.h> +#include <linux/spinlock.h> + +#define KHZ 1000 +#define MHZ (KHZ * KHZ) + +struct samsung_usb2_phy_driver; +struct samsung_usb2_phy_instance; +struct samsung_usb2_phy_config; + +struct samsung_usb2_phy_instance { + const struct samsung_usb2_common_phy *cfg; + struct phy *phy; + struct samsung_usb2_phy_driver *drv; + bool enabled; +}; + +struct samsung_usb2_phy_driver { + const struct samsung_usb2_phy_config *cfg; + struct clk *clk; + struct clk *ref_clk; + unsigned long ref_rate; + u32 ref_reg_val; + struct device *dev; + void __iomem *reg_phy; + struct regmap *reg_pmu; + struct regmap *reg_sys; + spinlock_t lock; + struct samsung_usb2_phy_instance instances[0]; +}; + +struct samsung_usb2_common_phy { + int (*power_on)(struct samsung_usb2_phy_instance *); + int (*power_off)(struct samsung_usb2_phy_instance *); + unsigned int id; + char *label; +}; + + +struct samsung_usb2_phy_config { + const struct samsung_usb2_common_phy *phys; + int (*rate_to_clk)(unsigned long, u32 *); + unsigned int num_phys; + bool has_mode_switch; +}; + +extern const struct samsung_usb2_phy_config exynos4210_usb2_phy_config; +extern const struct samsung_usb2_phy_config exynos4x12_usb2_phy_config; +extern const struct samsung_usb2_phy_config exynos5250_usb2_phy_config; +#endif diff --git a/drivers/phy/phy-sun4i-usb.c b/drivers/phy/phy-sun4i-usb.c new file mode 100644 index 0000000..e6e6c4b --- /dev/null +++ b/drivers/phy/phy-sun4i-usb.c @@ -0,0 +1,331 @@ +/* + * Allwinner sun4i USB phy driver + * + * Copyright (C) 2014 Hans de Goede <hdegoede@redhat.com> + * + * Based on code from + * Allwinner Technology Co., Ltd. <www.allwinnertech.com> + * + * Modelled after: Samsung S5P/EXYNOS SoC series MIPI CSIS/DSIM DPHY driver + * Copyright (C) 2013 Samsung Electronics Co., Ltd. + * Author: Sylwester Nawrocki <s.nawrocki@samsung.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/phy/phy.h> +#include <linux/platform_device.h> +#include <linux/regulator/consumer.h> +#include <linux/reset.h> + +#define REG_ISCR 0x00 +#define REG_PHYCTL 0x04 +#define REG_PHYBIST 0x08 +#define REG_PHYTUNE 0x0c + +#define PHYCTL_DATA BIT(7) + +#define SUNXI_AHB_ICHR8_EN BIT(10) +#define SUNXI_AHB_INCR4_BURST_EN BIT(9) +#define SUNXI_AHB_INCRX_ALIGN_EN BIT(8) +#define SUNXI_ULPI_BYPASS_EN BIT(0) + +/* Common Control Bits for Both PHYs */ +#define PHY_PLL_BW 0x03 +#define PHY_RES45_CAL_EN 0x0c + +/* Private Control Bits for Each PHY */ +#define PHY_TX_AMPLITUDE_TUNE 0x20 +#define PHY_TX_SLEWRATE_TUNE 0x22 +#define PHY_VBUSVALID_TH_SEL 0x25 +#define PHY_PULLUP_RES_SEL 0x27 +#define PHY_OTG_FUNC_EN 0x28 +#define PHY_VBUS_DET_EN 0x29 +#define PHY_DISCON_TH_SEL 0x2a + +#define MAX_PHYS 3 + +struct sun4i_usb_phy_data { + struct clk *clk; + void __iomem *base; + struct mutex mutex; + int num_phys; + u32 disc_thresh; + struct sun4i_usb_phy { + struct phy *phy; + void __iomem *pmu; + struct regulator *vbus; + struct reset_control *reset; + int index; + } phys[MAX_PHYS]; +}; + +#define to_sun4i_usb_phy_data(phy) \ + container_of((phy), struct sun4i_usb_phy_data, phys[(phy)->index]) + +static void sun4i_usb_phy_write(struct sun4i_usb_phy *phy, u32 addr, u32 data, + int len) +{ + struct sun4i_usb_phy_data *phy_data = to_sun4i_usb_phy_data(phy); + u32 temp, usbc_bit = BIT(phy->index * 2); + int i; + + mutex_lock(&phy_data->mutex); + + for (i = 0; i < len; i++) { + temp = readl(phy_data->base + REG_PHYCTL); + + /* clear the address portion */ + temp &= ~(0xff << 8); + + /* set the address */ + temp |= ((addr + i) << 8); + writel(temp, phy_data->base + REG_PHYCTL); + + /* set the data bit and clear usbc bit*/ + temp = readb(phy_data->base + REG_PHYCTL); + if (data & 0x1) + temp |= PHYCTL_DATA; + else + temp &= ~PHYCTL_DATA; + temp &= ~usbc_bit; + writeb(temp, phy_data->base + REG_PHYCTL); + + /* pulse usbc_bit */ + temp = readb(phy_data->base + REG_PHYCTL); + temp |= usbc_bit; + writeb(temp, phy_data->base + REG_PHYCTL); + + temp = readb(phy_data->base + REG_PHYCTL); + temp &= ~usbc_bit; + writeb(temp, phy_data->base + REG_PHYCTL); + + data >>= 1; + } + mutex_unlock(&phy_data->mutex); +} + +static void sun4i_usb_phy_passby(struct sun4i_usb_phy *phy, int enable) +{ + u32 bits, reg_value; + + if (!phy->pmu) + return; + + bits = SUNXI_AHB_ICHR8_EN | SUNXI_AHB_INCR4_BURST_EN | + SUNXI_AHB_INCRX_ALIGN_EN | SUNXI_ULPI_BYPASS_EN; + + reg_value = readl(phy->pmu); + + if (enable) + reg_value |= bits; + else + reg_value &= ~bits; + + writel(reg_value, phy->pmu); +} + +static int sun4i_usb_phy_init(struct phy *_phy) +{ + struct sun4i_usb_phy *phy = phy_get_drvdata(_phy); + struct sun4i_usb_phy_data *data = to_sun4i_usb_phy_data(phy); + int ret; + + ret = clk_prepare_enable(data->clk); + if (ret) + return ret; + + ret = reset_control_deassert(phy->reset); + if (ret) { + clk_disable_unprepare(data->clk); + return ret; + } + + /* Adjust PHY's magnitude and rate */ + sun4i_usb_phy_write(phy, PHY_TX_AMPLITUDE_TUNE, 0x14, 5); + + /* Disconnect threshold adjustment */ + sun4i_usb_phy_write(phy, PHY_DISCON_TH_SEL, data->disc_thresh, 2); + + sun4i_usb_phy_passby(phy, 1); + + return 0; +} + +static int sun4i_usb_phy_exit(struct phy *_phy) +{ + struct sun4i_usb_phy *phy = phy_get_drvdata(_phy); + struct sun4i_usb_phy_data *data = to_sun4i_usb_phy_data(phy); + + sun4i_usb_phy_passby(phy, 0); + reset_control_assert(phy->reset); + clk_disable_unprepare(data->clk); + + return 0; +} + +static int sun4i_usb_phy_power_on(struct phy *_phy) +{ + struct sun4i_usb_phy *phy = phy_get_drvdata(_phy); + int ret = 0; + + if (phy->vbus) + ret = regulator_enable(phy->vbus); + + return ret; +} + +static int sun4i_usb_phy_power_off(struct phy *_phy) +{ + struct sun4i_usb_phy *phy = phy_get_drvdata(_phy); + + if (phy->vbus) + regulator_disable(phy->vbus); + + return 0; +} + +static struct phy_ops sun4i_usb_phy_ops = { + .init = sun4i_usb_phy_init, + .exit = sun4i_usb_phy_exit, + .power_on = sun4i_usb_phy_power_on, + .power_off = sun4i_usb_phy_power_off, + .owner = THIS_MODULE, +}; + +static struct phy *sun4i_usb_phy_xlate(struct device *dev, + struct of_phandle_args *args) +{ + struct sun4i_usb_phy_data *data = dev_get_drvdata(dev); + + if (WARN_ON(args->args[0] == 0 || args->args[0] >= data->num_phys)) + return ERR_PTR(-ENODEV); + + return data->phys[args->args[0]].phy; +} + +static int sun4i_usb_phy_probe(struct platform_device *pdev) +{ + struct sun4i_usb_phy_data *data; + struct device *dev = &pdev->dev; + struct device_node *np = dev->of_node; + void __iomem *pmu = NULL; + struct phy_provider *phy_provider; + struct reset_control *reset; + struct regulator *vbus; + struct resource *res; + struct phy *phy; + char name[16]; + int i; + + data = devm_kzalloc(dev, sizeof(*data), GFP_KERNEL); + if (!data) + return -ENOMEM; + + mutex_init(&data->mutex); + + if (of_device_is_compatible(np, "allwinner,sun5i-a13-usb-phy")) + data->num_phys = 2; + else + data->num_phys = 3; + + if (of_device_is_compatible(np, "allwinner,sun4i-a10-usb-phy")) + data->disc_thresh = 3; + else + data->disc_thresh = 2; + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "phy_ctrl"); + data->base = devm_ioremap_resource(dev, res); + if (IS_ERR(data->base)) + return PTR_ERR(data->base); + + data->clk = devm_clk_get(dev, "usb_phy"); + if (IS_ERR(data->clk)) { + dev_err(dev, "could not get usb_phy clock\n"); + return PTR_ERR(data->clk); + } + + /* Skip 0, 0 is the phy for otg which is not yet supported. */ + for (i = 1; i < data->num_phys; i++) { + snprintf(name, sizeof(name), "usb%d_vbus", i); + vbus = devm_regulator_get_optional(dev, name); + if (IS_ERR(vbus)) { + if (PTR_ERR(vbus) == -EPROBE_DEFER) + return -EPROBE_DEFER; + vbus = NULL; + } + + snprintf(name, sizeof(name), "usb%d_reset", i); + reset = devm_reset_control_get(dev, name); + if (IS_ERR(reset)) { + dev_err(dev, "failed to get reset %s\n", name); + return PTR_ERR(reset); + } + + if (i) { /* No pmu for usbc0 */ + snprintf(name, sizeof(name), "pmu%d", i); + res = platform_get_resource_byname(pdev, + IORESOURCE_MEM, name); + pmu = devm_ioremap_resource(dev, res); + if (IS_ERR(pmu)) + return PTR_ERR(pmu); + } + + phy = devm_phy_create(dev, &sun4i_usb_phy_ops, NULL); + if (IS_ERR(phy)) { + dev_err(dev, "failed to create PHY %d\n", i); + return PTR_ERR(phy); + } + + data->phys[i].phy = phy; + data->phys[i].pmu = pmu; + data->phys[i].vbus = vbus; + data->phys[i].reset = reset; + data->phys[i].index = i; + phy_set_drvdata(phy, &data->phys[i]); + } + + dev_set_drvdata(dev, data); + phy_provider = devm_of_phy_provider_register(dev, sun4i_usb_phy_xlate); + if (IS_ERR(phy_provider)) + return PTR_ERR(phy_provider); + + return 0; +} + +static const struct of_device_id sun4i_usb_phy_of_match[] = { + { .compatible = "allwinner,sun4i-a10-usb-phy" }, + { .compatible = "allwinner,sun5i-a13-usb-phy" }, + { .compatible = "allwinner,sun7i-a20-usb-phy" }, + { }, +}; +MODULE_DEVICE_TABLE(of, sun4i_usb_phy_of_match); + +static struct platform_driver sun4i_usb_phy_driver = { + .probe = sun4i_usb_phy_probe, + .driver = { + .of_match_table = sun4i_usb_phy_of_match, + .name = "sun4i-usb-phy", + .owner = THIS_MODULE, + } +}; +module_platform_driver(sun4i_usb_phy_driver); + +MODULE_DESCRIPTION("Allwinner sun4i USB phy driver"); +MODULE_AUTHOR("Hans de Goede <hdegoede@redhat.com>"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/phy/phy-ti-pipe3.c b/drivers/phy/phy-ti-pipe3.c new file mode 100644 index 0000000..5913676 --- /dev/null +++ b/drivers/phy/phy-ti-pipe3.c @@ -0,0 +1,470 @@ +/* + * phy-ti-pipe3 - PIPE3 PHY driver. + * + * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * Author: Kishon Vijay Abraham I <kishon@ti.com> + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + */ + +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/slab.h> +#include <linux/phy/phy.h> +#include <linux/of.h> +#include <linux/clk.h> +#include <linux/err.h> +#include <linux/io.h> +#include <linux/pm_runtime.h> +#include <linux/delay.h> +#include <linux/phy/omap_control_phy.h> +#include <linux/of_platform.h> + +#define PLL_STATUS 0x00000004 +#define PLL_GO 0x00000008 +#define PLL_CONFIGURATION1 0x0000000C +#define PLL_CONFIGURATION2 0x00000010 +#define PLL_CONFIGURATION3 0x00000014 +#define PLL_CONFIGURATION4 0x00000020 + +#define PLL_REGM_MASK 0x001FFE00 +#define PLL_REGM_SHIFT 0x9 +#define PLL_REGM_F_MASK 0x0003FFFF +#define PLL_REGM_F_SHIFT 0x0 +#define PLL_REGN_MASK 0x000001FE +#define PLL_REGN_SHIFT 0x1 +#define PLL_SELFREQDCO_MASK 0x0000000E +#define PLL_SELFREQDCO_SHIFT 0x1 +#define PLL_SD_MASK 0x0003FC00 +#define PLL_SD_SHIFT 10 +#define SET_PLL_GO 0x1 +#define PLL_LDOPWDN BIT(15) +#define PLL_TICOPWDN BIT(16) +#define PLL_LOCK 0x2 +#define PLL_IDLE 0x1 + +/* + * This is an Empirical value that works, need to confirm the actual + * value required for the PIPE3PHY_PLL_CONFIGURATION2.PLL_IDLE status + * to be correctly reflected in the PIPE3PHY_PLL_STATUS register. + */ +#define PLL_IDLE_TIME 100 /* in milliseconds */ +#define PLL_LOCK_TIME 100 /* in milliseconds */ + +struct pipe3_dpll_params { + u16 m; + u8 n; + u8 freq:3; + u8 sd; + u32 mf; +}; + +struct pipe3_dpll_map { + unsigned long rate; + struct pipe3_dpll_params params; +}; + +struct ti_pipe3 { + void __iomem *pll_ctrl_base; + struct device *dev; + struct device *control_dev; + struct clk *wkupclk; + struct clk *sys_clk; + struct clk *refclk; + struct pipe3_dpll_map *dpll_map; +}; + +static struct pipe3_dpll_map dpll_map_usb[] = { + {12000000, {1250, 5, 4, 20, 0} }, /* 12 MHz */ + {16800000, {3125, 20, 4, 20, 0} }, /* 16.8 MHz */ + {19200000, {1172, 8, 4, 20, 65537} }, /* 19.2 MHz */ + {20000000, {1000, 7, 4, 10, 0} }, /* 20 MHz */ + {26000000, {1250, 12, 4, 20, 0} }, /* 26 MHz */ + {38400000, {3125, 47, 4, 20, 92843} }, /* 38.4 MHz */ + { }, /* Terminator */ +}; + +static struct pipe3_dpll_map dpll_map_sata[] = { + {12000000, {1000, 7, 4, 6, 0} }, /* 12 MHz */ + {16800000, {714, 7, 4, 6, 0} }, /* 16.8 MHz */ + {19200000, {625, 7, 4, 6, 0} }, /* 19.2 MHz */ + {20000000, {600, 7, 4, 6, 0} }, /* 20 MHz */ + {26000000, {461, 7, 4, 6, 0} }, /* 26 MHz */ + {38400000, {312, 7, 4, 6, 0} }, /* 38.4 MHz */ + { }, /* Terminator */ +}; + +static inline u32 ti_pipe3_readl(void __iomem *addr, unsigned offset) +{ + return __raw_readl(addr + offset); +} + +static inline void ti_pipe3_writel(void __iomem *addr, unsigned offset, + u32 data) +{ + __raw_writel(data, addr + offset); +} + +static struct pipe3_dpll_params *ti_pipe3_get_dpll_params(struct ti_pipe3 *phy) +{ + unsigned long rate; + struct pipe3_dpll_map *dpll_map = phy->dpll_map; + + rate = clk_get_rate(phy->sys_clk); + + for (; dpll_map->rate; dpll_map++) { + if (rate == dpll_map->rate) + return &dpll_map->params; + } + + dev_err(phy->dev, "No DPLL configuration for %lu Hz SYS CLK\n", rate); + + return NULL; +} + +static int ti_pipe3_power_off(struct phy *x) +{ + struct ti_pipe3 *phy = phy_get_drvdata(x); + + omap_control_phy_power(phy->control_dev, 0); + + return 0; +} + +static int ti_pipe3_power_on(struct phy *x) +{ + struct ti_pipe3 *phy = phy_get_drvdata(x); + + omap_control_phy_power(phy->control_dev, 1); + + return 0; +} + +static int ti_pipe3_dpll_wait_lock(struct ti_pipe3 *phy) +{ + u32 val; + unsigned long timeout; + + timeout = jiffies + msecs_to_jiffies(PLL_LOCK_TIME); + do { + cpu_relax(); + val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_STATUS); + if (val & PLL_LOCK) + break; + } while (!time_after(jiffies, timeout)); + + if (!(val & PLL_LOCK)) { + dev_err(phy->dev, "DPLL failed to lock\n"); + return -EBUSY; + } + + return 0; +} + +static int ti_pipe3_dpll_program(struct ti_pipe3 *phy) +{ + u32 val; + struct pipe3_dpll_params *dpll_params; + + dpll_params = ti_pipe3_get_dpll_params(phy); + if (!dpll_params) + return -EINVAL; + + val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION1); + val &= ~PLL_REGN_MASK; + val |= dpll_params->n << PLL_REGN_SHIFT; + ti_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION1, val); + + val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2); + val &= ~PLL_SELFREQDCO_MASK; + val |= dpll_params->freq << PLL_SELFREQDCO_SHIFT; + ti_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION2, val); + + val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION1); + val &= ~PLL_REGM_MASK; + val |= dpll_params->m << PLL_REGM_SHIFT; + ti_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION1, val); + + val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION4); + val &= ~PLL_REGM_F_MASK; + val |= dpll_params->mf << PLL_REGM_F_SHIFT; + ti_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION4, val); + + val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION3); + val &= ~PLL_SD_MASK; + val |= dpll_params->sd << PLL_SD_SHIFT; + ti_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION3, val); + + ti_pipe3_writel(phy->pll_ctrl_base, PLL_GO, SET_PLL_GO); + + return ti_pipe3_dpll_wait_lock(phy); +} + +static int ti_pipe3_init(struct phy *x) +{ + struct ti_pipe3 *phy = phy_get_drvdata(x); + u32 val; + int ret = 0; + + /* Bring it out of IDLE if it is IDLE */ + val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2); + if (val & PLL_IDLE) { + val &= ~PLL_IDLE; + ti_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION2, val); + ret = ti_pipe3_dpll_wait_lock(phy); + } + + /* Program the DPLL only if not locked */ + val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_STATUS); + if (!(val & PLL_LOCK)) + if (ti_pipe3_dpll_program(phy)) + return -EINVAL; + + return ret; +} + +static int ti_pipe3_exit(struct phy *x) +{ + struct ti_pipe3 *phy = phy_get_drvdata(x); + u32 val; + unsigned long timeout; + + /* SATA DPLL can't be powered down due to Errata i783 */ + if (of_device_is_compatible(phy->dev->of_node, "ti,phy-pipe3-sata")) + return 0; + + /* Put DPLL in IDLE mode */ + val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2); + val |= PLL_IDLE; + ti_pipe3_writel(phy->pll_ctrl_base, PLL_CONFIGURATION2, val); + + /* wait for LDO and Oscillator to power down */ + timeout = jiffies + msecs_to_jiffies(PLL_IDLE_TIME); + do { + cpu_relax(); + val = ti_pipe3_readl(phy->pll_ctrl_base, PLL_STATUS); + if ((val & PLL_TICOPWDN) && (val & PLL_LDOPWDN)) + break; + } while (!time_after(jiffies, timeout)); + + if (!(val & PLL_TICOPWDN) || !(val & PLL_LDOPWDN)) { + dev_err(phy->dev, "Failed to power down: PLL_STATUS 0x%x\n", + val); + return -EBUSY; + } + + return 0; +} +static struct phy_ops ops = { + .init = ti_pipe3_init, + .exit = ti_pipe3_exit, + .power_on = ti_pipe3_power_on, + .power_off = ti_pipe3_power_off, + .owner = THIS_MODULE, +}; + +#ifdef CONFIG_OF +static const struct of_device_id ti_pipe3_id_table[]; +#endif + +static int ti_pipe3_probe(struct platform_device *pdev) +{ + struct ti_pipe3 *phy; + struct phy *generic_phy; + struct phy_provider *phy_provider; + struct resource *res; + struct device_node *node = pdev->dev.of_node; + struct device_node *control_node; + struct platform_device *control_pdev; + const struct of_device_id *match; + + match = of_match_device(of_match_ptr(ti_pipe3_id_table), &pdev->dev); + if (!match) + return -EINVAL; + + phy = devm_kzalloc(&pdev->dev, sizeof(*phy), GFP_KERNEL); + if (!phy) { + dev_err(&pdev->dev, "unable to alloc mem for TI PIPE3 PHY\n"); + return -ENOMEM; + } + + phy->dpll_map = (struct pipe3_dpll_map *)match->data; + if (!phy->dpll_map) { + dev_err(&pdev->dev, "no DPLL data\n"); + return -EINVAL; + } + + res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pll_ctrl"); + phy->pll_ctrl_base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(phy->pll_ctrl_base)) + return PTR_ERR(phy->pll_ctrl_base); + + phy->dev = &pdev->dev; + + if (!of_device_is_compatible(node, "ti,phy-pipe3-sata")) { + + phy->wkupclk = devm_clk_get(phy->dev, "wkupclk"); + if (IS_ERR(phy->wkupclk)) { + dev_err(&pdev->dev, "unable to get wkupclk\n"); + return PTR_ERR(phy->wkupclk); + } + + phy->refclk = devm_clk_get(phy->dev, "refclk"); + if (IS_ERR(phy->refclk)) { + dev_err(&pdev->dev, "unable to get refclk\n"); + return PTR_ERR(phy->refclk); + } + } else { + phy->wkupclk = ERR_PTR(-ENODEV); + phy->refclk = ERR_PTR(-ENODEV); + } + + phy->sys_clk = devm_clk_get(phy->dev, "sysclk"); + if (IS_ERR(phy->sys_clk)) { + dev_err(&pdev->dev, "unable to get sysclk\n"); + return -EINVAL; + } + + control_node = of_parse_phandle(node, "ctrl-module", 0); + if (!control_node) { + dev_err(&pdev->dev, "Failed to get control device phandle\n"); + return -EINVAL; + } + + control_pdev = of_find_device_by_node(control_node); + if (!control_pdev) { + dev_err(&pdev->dev, "Failed to get control device\n"); + return -EINVAL; + } + + phy->control_dev = &control_pdev->dev; + + omap_control_phy_power(phy->control_dev, 0); + + platform_set_drvdata(pdev, phy); + pm_runtime_enable(phy->dev); + + generic_phy = devm_phy_create(phy->dev, &ops, NULL); + if (IS_ERR(generic_phy)) + return PTR_ERR(generic_phy); + + phy_set_drvdata(generic_phy, phy); + phy_provider = devm_of_phy_provider_register(phy->dev, + of_phy_simple_xlate); + if (IS_ERR(phy_provider)) + return PTR_ERR(phy_provider); + + pm_runtime_get(&pdev->dev); + + return 0; +} + +static int ti_pipe3_remove(struct platform_device *pdev) +{ + if (!pm_runtime_suspended(&pdev->dev)) + pm_runtime_put(&pdev->dev); + pm_runtime_disable(&pdev->dev); + + return 0; +} + +#ifdef CONFIG_PM_RUNTIME + +static int ti_pipe3_runtime_suspend(struct device *dev) +{ + struct ti_pipe3 *phy = dev_get_drvdata(dev); + + if (!IS_ERR(phy->wkupclk)) + clk_disable_unprepare(phy->wkupclk); + if (!IS_ERR(phy->refclk)) + clk_disable_unprepare(phy->refclk); + + return 0; +} + +static int ti_pipe3_runtime_resume(struct device *dev) +{ + u32 ret = 0; + struct ti_pipe3 *phy = dev_get_drvdata(dev); + + if (!IS_ERR(phy->refclk)) { + ret = clk_prepare_enable(phy->refclk); + if (ret) { + dev_err(phy->dev, "Failed to enable refclk %d\n", ret); + goto err1; + } + } + + if (!IS_ERR(phy->wkupclk)) { + ret = clk_prepare_enable(phy->wkupclk); + if (ret) { + dev_err(phy->dev, "Failed to enable wkupclk %d\n", ret); + goto err2; + } + } + + return 0; + +err2: + if (!IS_ERR(phy->refclk)) + clk_disable_unprepare(phy->refclk); + +err1: + return ret; +} + +static const struct dev_pm_ops ti_pipe3_pm_ops = { + SET_RUNTIME_PM_OPS(ti_pipe3_runtime_suspend, + ti_pipe3_runtime_resume, NULL) +}; + +#define DEV_PM_OPS (&ti_pipe3_pm_ops) +#else +#define DEV_PM_OPS NULL +#endif + +#ifdef CONFIG_OF +static const struct of_device_id ti_pipe3_id_table[] = { + { + .compatible = "ti,phy-usb3", + .data = dpll_map_usb, + }, + { + .compatible = "ti,omap-usb3", + .data = dpll_map_usb, + }, + { + .compatible = "ti,phy-pipe3-sata", + .data = dpll_map_sata, + }, + {} +}; +MODULE_DEVICE_TABLE(of, ti_pipe3_id_table); +#endif + +static struct platform_driver ti_pipe3_driver = { + .probe = ti_pipe3_probe, + .remove = ti_pipe3_remove, + .driver = { + .name = "ti-pipe3", + .owner = THIS_MODULE, + .pm = DEV_PM_OPS, + .of_match_table = of_match_ptr(ti_pipe3_id_table), + }, +}; + +module_platform_driver(ti_pipe3_driver); + +MODULE_ALIAS("platform: ti_pipe3"); +MODULE_AUTHOR("Texas Instruments Inc."); +MODULE_DESCRIPTION("TI PIPE3 phy driver"); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/phy/phy-twl4030-usb.c b/drivers/phy/phy-twl4030-usb.c index c3ace1d..2e0e9b3 100644 --- a/drivers/phy/phy-twl4030-usb.c +++ b/drivers/phy/phy-twl4030-usb.c @@ -338,7 +338,7 @@ static void twl4030_usb_set_mode(struct twl4030_usb *twl, int mode) dev_err(twl->dev, "unsupported T2 transceiver mode %d\n", mode); break; - }; + } } static void twl4030_i2c_access(struct twl4030_usb *twl, int on) @@ -661,7 +661,7 @@ static int twl4030_usb_probe(struct platform_device *pdev) struct phy_provider *phy_provider; struct phy_init_data *init_data = NULL; - twl = devm_kzalloc(&pdev->dev, sizeof *twl, GFP_KERNEL); + twl = devm_kzalloc(&pdev->dev, sizeof(*twl), GFP_KERNEL); if (!twl) return -ENOMEM; @@ -676,7 +676,7 @@ static int twl4030_usb_probe(struct platform_device *pdev) return -EINVAL; } - otg = devm_kzalloc(&pdev->dev, sizeof *otg, GFP_KERNEL); + otg = devm_kzalloc(&pdev->dev, sizeof(*otg), GFP_KERNEL); if (!otg) return -ENOMEM; diff --git a/drivers/phy/phy-xgene.c b/drivers/phy/phy-xgene.c new file mode 100644 index 0000000..4aa1ccd --- /dev/null +++ b/drivers/phy/phy-xgene.c @@ -0,0 +1,1750 @@ +/* + * AppliedMicro X-Gene Multi-purpose PHY driver + * + * Copyright (c) 2014, Applied Micro Circuits Corporation + * Author: Loc Ho <lho@apm.com> + * Tuan Phan <tphan@apm.com> + * Suman Tripathi <stripathi@apm.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see <http://www.gnu.org/licenses/>. + * + * The APM X-Gene PHY consists of two PLL clock macro's (CMU) and lanes. + * The first PLL clock macro is used for internal reference clock. The second + * PLL clock macro is used to generate the clock for the PHY. This driver + * configures the first PLL CMU, the second PLL CMU, and programs the PHY to + * operate according to the mode of operation. The first PLL CMU is only + * required if internal clock is enabled. + * + * Logical Layer Out Of HW module units: + * + * ----------------- + * | Internal | |------| + * | Ref PLL CMU |----| | ------------- --------- + * ------------ ---- | MUX |-----|PHY PLL CMU|----| Serdes| + * | | | | --------- + * External Clock ------| | ------------- + * |------| + * + * The Ref PLL CMU CSR (Configuration System Registers) is accessed + * indirectly from the SDS offset at 0x2000. It is only required for + * internal reference clock. + * The PHY PLL CMU CSR is accessed indirectly from the SDS offset at 0x0000. + * The Serdes CSR is accessed indirectly from the SDS offset at 0x0400. + * + * The Ref PLL CMU can be located within the same PHY IP or outside the PHY IP + * due to shared Ref PLL CMU. For PHY with Ref PLL CMU shared with another IP, + * it is located outside the PHY IP. This is the case for the PHY located + * at 0x1f23a000 (SATA Port 4/5). For such PHY, another resource is required + * to located the SDS/Ref PLL CMU module and its clock for that IP enabled. + * + * Currently, this driver only supports Gen3 SATA mode with external clock. + */ +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/delay.h> +#include <linux/phy/phy.h> +#include <linux/clk.h> + +/* Max 2 lanes per a PHY unit */ +#define MAX_LANE 2 + +/* Register offset inside the PHY */ +#define SERDES_PLL_INDIRECT_OFFSET 0x0000 +#define SERDES_PLL_REF_INDIRECT_OFFSET 0x2000 +#define SERDES_INDIRECT_OFFSET 0x0400 +#define SERDES_LANE_STRIDE 0x0200 + +/* Some default Serdes parameters */ +#define DEFAULT_SATA_TXBOOST_GAIN { 0x1e, 0x1e, 0x1e } +#define DEFAULT_SATA_TXEYEDIRECTION { 0x0, 0x0, 0x0 } +#define DEFAULT_SATA_TXEYETUNING { 0xa, 0xa, 0xa } +#define DEFAULT_SATA_SPD_SEL { 0x1, 0x3, 0x7 } +#define DEFAULT_SATA_TXAMP { 0x8, 0x8, 0x8 } +#define DEFAULT_SATA_TXCN1 { 0x2, 0x2, 0x2 } +#define DEFAULT_SATA_TXCN2 { 0x0, 0x0, 0x0 } +#define DEFAULT_SATA_TXCP1 { 0xa, 0xa, 0xa } + +#define SATA_SPD_SEL_GEN3 0x7 +#define SATA_SPD_SEL_GEN2 0x3 +#define SATA_SPD_SEL_GEN1 0x1 + +#define SSC_DISABLE 0 +#define SSC_ENABLE 1 + +#define FBDIV_VAL_50M 0x77 +#define REFDIV_VAL_50M 0x1 +#define FBDIV_VAL_100M 0x3B +#define REFDIV_VAL_100M 0x0 + +/* SATA Clock/Reset CSR */ +#define SATACLKENREG 0x00000000 +#define SATA0_CORE_CLKEN 0x00000002 +#define SATA1_CORE_CLKEN 0x00000004 +#define SATASRESETREG 0x00000004 +#define SATA_MEM_RESET_MASK 0x00000020 +#define SATA_MEM_RESET_RD(src) (((src) & 0x00000020) >> 5) +#define SATA_SDS_RESET_MASK 0x00000004 +#define SATA_CSR_RESET_MASK 0x00000001 +#define SATA_CORE_RESET_MASK 0x00000002 +#define SATA_PMCLK_RESET_MASK 0x00000010 +#define SATA_PCLK_RESET_MASK 0x00000008 + +/* SDS CSR used for PHY Indirect access */ +#define SATA_ENET_SDS_PCS_CTL0 0x00000000 +#define REGSPEC_CFG_I_TX_WORDMODE0_SET(dst, src) \ + (((dst) & ~0x00070000) | (((u32) (src) << 16) & 0x00070000)) +#define REGSPEC_CFG_I_RX_WORDMODE0_SET(dst, src) \ + (((dst) & ~0x00e00000) | (((u32) (src) << 21) & 0x00e00000)) +#define SATA_ENET_SDS_CTL0 0x0000000c +#define REGSPEC_CFG_I_CUSTOMER_PIN_MODE0_SET(dst, src) \ + (((dst) & ~0x00007fff) | (((u32) (src)) & 0x00007fff)) +#define SATA_ENET_SDS_CTL1 0x00000010 +#define CFG_I_SPD_SEL_CDR_OVR1_SET(dst, src) \ + (((dst) & ~0x0000000f) | (((u32) (src)) & 0x0000000f)) +#define SATA_ENET_SDS_RST_CTL 0x00000024 +#define SATA_ENET_SDS_IND_CMD_REG 0x0000003c +#define CFG_IND_WR_CMD_MASK 0x00000001 +#define CFG_IND_RD_CMD_MASK 0x00000002 +#define CFG_IND_CMD_DONE_MASK 0x00000004 +#define CFG_IND_ADDR_SET(dst, src) \ + (((dst) & ~0x003ffff0) | (((u32) (src) << 4) & 0x003ffff0)) +#define SATA_ENET_SDS_IND_RDATA_REG 0x00000040 +#define SATA_ENET_SDS_IND_WDATA_REG 0x00000044 +#define SATA_ENET_CLK_MACRO_REG 0x0000004c +#define I_RESET_B_SET(dst, src) \ + (((dst) & ~0x00000001) | (((u32) (src)) & 0x00000001)) +#define I_PLL_FBDIV_SET(dst, src) \ + (((dst) & ~0x001ff000) | (((u32) (src) << 12) & 0x001ff000)) +#define I_CUSTOMEROV_SET(dst, src) \ + (((dst) & ~0x00000f80) | (((u32) (src) << 7) & 0x00000f80)) +#define O_PLL_LOCK_RD(src) (((src) & 0x40000000) >> 30) +#define O_PLL_READY_RD(src) (((src) & 0x80000000) >> 31) + +/* PLL Clock Macro Unit (CMU) CSR accessing from SDS indirectly */ +#define CMU_REG0 0x00000 +#define CMU_REG0_PLL_REF_SEL_MASK 0x00002000 +#define CMU_REG0_PLL_REF_SEL_SET(dst, src) \ + (((dst) & ~0x00002000) | (((u32) (src) << 13) & 0x00002000)) +#define CMU_REG0_PDOWN_MASK 0x00004000 +#define CMU_REG0_CAL_COUNT_RESOL_SET(dst, src) \ + (((dst) & ~0x000000e0) | (((u32) (src) << 5) & 0x000000e0)) +#define CMU_REG1 0x00002 +#define CMU_REG1_PLL_CP_SET(dst, src) \ + (((dst) & ~0x00003c00) | (((u32) (src) << 10) & 0x00003c00)) +#define CMU_REG1_PLL_MANUALCAL_SET(dst, src) \ + (((dst) & ~0x00000008) | (((u32) (src) << 3) & 0x00000008)) +#define CMU_REG1_PLL_CP_SEL_SET(dst, src) \ + (((dst) & ~0x000003e0) | (((u32) (src) << 5) & 0x000003e0)) +#define CMU_REG1_REFCLK_CMOS_SEL_MASK 0x00000001 +#define CMU_REG1_REFCLK_CMOS_SEL_SET(dst, src) \ + (((dst) & ~0x00000001) | (((u32) (src) << 0) & 0x00000001)) +#define CMU_REG2 0x00004 +#define CMU_REG2_PLL_REFDIV_SET(dst, src) \ + (((dst) & ~0x0000c000) | (((u32) (src) << 14) & 0x0000c000)) +#define CMU_REG2_PLL_LFRES_SET(dst, src) \ + (((dst) & ~0x0000001e) | (((u32) (src) << 1) & 0x0000001e)) +#define CMU_REG2_PLL_FBDIV_SET(dst, src) \ + (((dst) & ~0x00003fe0) | (((u32) (src) << 5) & 0x00003fe0)) +#define CMU_REG3 0x00006 +#define CMU_REG3_VCOVARSEL_SET(dst, src) \ + (((dst) & ~0x0000000f) | (((u32) (src) << 0) & 0x0000000f)) +#define CMU_REG3_VCO_MOMSEL_INIT_SET(dst, src) \ + (((dst) & ~0x000003f0) | (((u32) (src) << 4) & 0x000003f0)) +#define CMU_REG3_VCO_MANMOMSEL_SET(dst, src) \ + (((dst) & ~0x0000fc00) | (((u32) (src) << 10) & 0x0000fc00)) +#define CMU_REG4 0x00008 +#define CMU_REG5 0x0000a +#define CMU_REG5_PLL_LFSMCAP_SET(dst, src) \ + (((dst) & ~0x0000c000) | (((u32) (src) << 14) & 0x0000c000)) +#define CMU_REG5_PLL_LOCK_RESOLUTION_SET(dst, src) \ + (((dst) & ~0x0000000e) | (((u32) (src) << 1) & 0x0000000e)) +#define CMU_REG5_PLL_LFCAP_SET(dst, src) \ + (((dst) & ~0x00003000) | (((u32) (src) << 12) & 0x00003000)) +#define CMU_REG5_PLL_RESETB_MASK 0x00000001 +#define CMU_REG6 0x0000c +#define CMU_REG6_PLL_VREGTRIM_SET(dst, src) \ + (((dst) & ~0x00000600) | (((u32) (src) << 9) & 0x00000600)) +#define CMU_REG6_MAN_PVT_CAL_SET(dst, src) \ + (((dst) & ~0x00000004) | (((u32) (src) << 2) & 0x00000004)) +#define CMU_REG7 0x0000e +#define CMU_REG7_PLL_CALIB_DONE_RD(src) ((0x00004000 & (u32) (src)) >> 14) +#define CMU_REG7_VCO_CAL_FAIL_RD(src) ((0x00000c00 & (u32) (src)) >> 10) +#define CMU_REG8 0x00010 +#define CMU_REG9 0x00012 +#define CMU_REG9_WORD_LEN_8BIT 0x000 +#define CMU_REG9_WORD_LEN_10BIT 0x001 +#define CMU_REG9_WORD_LEN_16BIT 0x002 +#define CMU_REG9_WORD_LEN_20BIT 0x003 +#define CMU_REG9_WORD_LEN_32BIT 0x004 +#define CMU_REG9_WORD_LEN_40BIT 0x005 +#define CMU_REG9_WORD_LEN_64BIT 0x006 +#define CMU_REG9_WORD_LEN_66BIT 0x007 +#define CMU_REG9_TX_WORD_MODE_CH1_SET(dst, src) \ + (((dst) & ~0x00000380) | (((u32) (src) << 7) & 0x00000380)) +#define CMU_REG9_TX_WORD_MODE_CH0_SET(dst, src) \ + (((dst) & ~0x00000070) | (((u32) (src) << 4) & 0x00000070)) +#define CMU_REG9_PLL_POST_DIVBY2_SET(dst, src) \ + (((dst) & ~0x00000008) | (((u32) (src) << 3) & 0x00000008)) +#define CMU_REG9_VBG_BYPASSB_SET(dst, src) \ + (((dst) & ~0x00000004) | (((u32) (src) << 2) & 0x00000004)) +#define CMU_REG9_IGEN_BYPASS_SET(dst, src) \ + (((dst) & ~0x00000002) | (((u32) (src) << 1) & 0x00000002)) +#define CMU_REG10 0x00014 +#define CMU_REG10_VREG_REFSEL_SET(dst, src) \ + (((dst) & ~0x00000001) | (((u32) (src) << 0) & 0x00000001)) +#define CMU_REG11 0x00016 +#define CMU_REG12 0x00018 +#define CMU_REG12_STATE_DELAY9_SET(dst, src) \ + (((dst) & ~0x000000f0) | (((u32) (src) << 4) & 0x000000f0)) +#define CMU_REG13 0x0001a +#define CMU_REG14 0x0001c +#define CMU_REG15 0x0001e +#define CMU_REG16 0x00020 +#define CMU_REG16_PVT_DN_MAN_ENA_MASK 0x00000001 +#define CMU_REG16_PVT_UP_MAN_ENA_MASK 0x00000002 +#define CMU_REG16_VCOCAL_WAIT_BTW_CODE_SET(dst, src) \ + (((dst) & ~0x0000001c) | (((u32) (src) << 2) & 0x0000001c)) +#define CMU_REG16_CALIBRATION_DONE_OVERRIDE_SET(dst, src) \ + (((dst) & ~0x00000040) | (((u32) (src) << 6) & 0x00000040)) +#define CMU_REG16_BYPASS_PLL_LOCK_SET(dst, src) \ + (((dst) & ~0x00000020) | (((u32) (src) << 5) & 0x00000020)) +#define CMU_REG17 0x00022 +#define CMU_REG17_PVT_CODE_R2A_SET(dst, src) \ + (((dst) & ~0x00007f00) | (((u32) (src) << 8) & 0x00007f00)) +#define CMU_REG17_RESERVED_7_SET(dst, src) \ + (((dst) & ~0x000000e0) | (((u32) (src) << 5) & 0x000000e0)) +#define CMU_REG17_PVT_TERM_MAN_ENA_MASK 0x00008000 +#define CMU_REG18 0x00024 +#define CMU_REG19 0x00026 +#define CMU_REG20 0x00028 +#define CMU_REG21 0x0002a +#define CMU_REG22 0x0002c +#define CMU_REG23 0x0002e +#define CMU_REG24 0x00030 +#define CMU_REG25 0x00032 +#define CMU_REG26 0x00034 +#define CMU_REG26_FORCE_PLL_LOCK_SET(dst, src) \ + (((dst) & ~0x00000001) | (((u32) (src) << 0) & 0x00000001)) +#define CMU_REG27 0x00036 +#define CMU_REG28 0x00038 +#define CMU_REG29 0x0003a +#define CMU_REG30 0x0003c +#define CMU_REG30_LOCK_COUNT_SET(dst, src) \ + (((dst) & ~0x00000006) | (((u32) (src) << 1) & 0x00000006)) +#define CMU_REG30_PCIE_MODE_SET(dst, src) \ + (((dst) & ~0x00000008) | (((u32) (src) << 3) & 0x00000008)) +#define CMU_REG31 0x0003e +#define CMU_REG32 0x00040 +#define CMU_REG32_FORCE_VCOCAL_START_MASK 0x00004000 +#define CMU_REG32_PVT_CAL_WAIT_SEL_SET(dst, src) \ + (((dst) & ~0x00000006) | (((u32) (src) << 1) & 0x00000006)) +#define CMU_REG32_IREF_ADJ_SET(dst, src) \ + (((dst) & ~0x00000180) | (((u32) (src) << 7) & 0x00000180)) +#define CMU_REG33 0x00042 +#define CMU_REG34 0x00044 +#define CMU_REG34_VCO_CAL_VTH_LO_MAX_SET(dst, src) \ + (((dst) & ~0x0000000f) | (((u32) (src) << 0) & 0x0000000f)) +#define CMU_REG34_VCO_CAL_VTH_HI_MAX_SET(dst, src) \ + (((dst) & ~0x00000f00) | (((u32) (src) << 8) & 0x00000f00)) +#define CMU_REG34_VCO_CAL_VTH_LO_MIN_SET(dst, src) \ + (((dst) & ~0x000000f0) | (((u32) (src) << 4) & 0x000000f0)) +#define CMU_REG34_VCO_CAL_VTH_HI_MIN_SET(dst, src) \ + (((dst) & ~0x0000f000) | (((u32) (src) << 12) & 0x0000f000)) +#define CMU_REG35 0x00046 +#define CMU_REG35_PLL_SSC_MOD_SET(dst, src) \ + (((dst) & ~0x0000fe00) | (((u32) (src) << 9) & 0x0000fe00)) +#define CMU_REG36 0x00048 +#define CMU_REG36_PLL_SSC_EN_SET(dst, src) \ + (((dst) & ~0x00000010) | (((u32) (src) << 4) & 0x00000010)) +#define CMU_REG36_PLL_SSC_VSTEP_SET(dst, src) \ + (((dst) & ~0x0000ffc0) | (((u32) (src) << 6) & 0x0000ffc0)) +#define CMU_REG36_PLL_SSC_DSMSEL_SET(dst, src) \ + (((dst) & ~0x00000020) | (((u32) (src) << 5) & 0x00000020)) +#define CMU_REG37 0x0004a +#define CMU_REG38 0x0004c +#define CMU_REG39 0x0004e + +/* PHY lane CSR accessing from SDS indirectly */ +#define RXTX_REG0 0x000 +#define RXTX_REG0_CTLE_EQ_HR_SET(dst, src) \ + (((dst) & ~0x0000f800) | (((u32) (src) << 11) & 0x0000f800)) +#define RXTX_REG0_CTLE_EQ_QR_SET(dst, src) \ + (((dst) & ~0x000007c0) | (((u32) (src) << 6) & 0x000007c0)) +#define RXTX_REG0_CTLE_EQ_FR_SET(dst, src) \ + (((dst) & ~0x0000003e) | (((u32) (src) << 1) & 0x0000003e)) +#define RXTX_REG1 0x002 +#define RXTX_REG1_RXACVCM_SET(dst, src) \ + (((dst) & ~0x0000f000) | (((u32) (src) << 12) & 0x0000f000)) +#define RXTX_REG1_CTLE_EQ_SET(dst, src) \ + (((dst) & ~0x00000f80) | (((u32) (src) << 7) & 0x00000f80)) +#define RXTX_REG1_RXVREG1_SET(dst, src) \ + (((dst) & ~0x00000060) | (((u32) (src) << 5) & 0x00000060)) +#define RXTX_REG1_RXIREF_ADJ_SET(dst, src) \ + (((dst) & ~0x00000006) | (((u32) (src) << 1) & 0x00000006)) +#define RXTX_REG2 0x004 +#define RXTX_REG2_VTT_ENA_SET(dst, src) \ + (((dst) & ~0x00000100) | (((u32) (src) << 8) & 0x00000100)) +#define RXTX_REG2_TX_FIFO_ENA_SET(dst, src) \ + (((dst) & ~0x00000020) | (((u32) (src) << 5) & 0x00000020)) +#define RXTX_REG2_VTT_SEL_SET(dst, src) \ + (((dst) & ~0x000000c0) | (((u32) (src) << 6) & 0x000000c0)) +#define RXTX_REG4 0x008 +#define RXTX_REG4_TX_LOOPBACK_BUF_EN_MASK 0x00000040 +#define RXTX_REG4_TX_DATA_RATE_SET(dst, src) \ + (((dst) & ~0x0000c000) | (((u32) (src) << 14) & 0x0000c000)) +#define RXTX_REG4_TX_WORD_MODE_SET(dst, src) \ + (((dst) & ~0x00003800) | (((u32) (src) << 11) & 0x00003800)) +#define RXTX_REG5 0x00a +#define RXTX_REG5_TX_CN1_SET(dst, src) \ + (((dst) & ~0x0000f800) | (((u32) (src) << 11) & 0x0000f800)) +#define RXTX_REG5_TX_CP1_SET(dst, src) \ + (((dst) & ~0x000007e0) | (((u32) (src) << 5) & 0x000007e0)) +#define RXTX_REG5_TX_CN2_SET(dst, src) \ + (((dst) & ~0x0000001f) | (((u32) (src) << 0) & 0x0000001f)) +#define RXTX_REG6 0x00c +#define RXTX_REG6_TXAMP_CNTL_SET(dst, src) \ + (((dst) & ~0x00000780) | (((u32) (src) << 7) & 0x00000780)) +#define RXTX_REG6_TXAMP_ENA_SET(dst, src) \ + (((dst) & ~0x00000040) | (((u32) (src) << 6) & 0x00000040)) +#define RXTX_REG6_RX_BIST_ERRCNT_RD_SET(dst, src) \ + (((dst) & ~0x00000001) | (((u32) (src) << 0) & 0x00000001)) +#define RXTX_REG6_TX_IDLE_SET(dst, src) \ + (((dst) & ~0x00000008) | (((u32) (src) << 3) & 0x00000008)) +#define RXTX_REG6_RX_BIST_RESYNC_SET(dst, src) \ + (((dst) & ~0x00000002) | (((u32) (src) << 1) & 0x00000002)) +#define RXTX_REG7 0x00e +#define RXTX_REG7_RESETB_RXD_MASK 0x00000100 +#define RXTX_REG7_RESETB_RXA_MASK 0x00000080 +#define RXTX_REG7_BIST_ENA_RX_SET(dst, src) \ + (((dst) & ~0x00000040) | (((u32) (src) << 6) & 0x00000040)) +#define RXTX_REG7_RX_WORD_MODE_SET(dst, src) \ + (((dst) & ~0x00003800) | (((u32) (src) << 11) & 0x00003800)) +#define RXTX_REG8 0x010 +#define RXTX_REG8_CDR_LOOP_ENA_SET(dst, src) \ + (((dst) & ~0x00004000) | (((u32) (src) << 14) & 0x00004000)) +#define RXTX_REG8_CDR_BYPASS_RXLOS_SET(dst, src) \ + (((dst) & ~0x00000800) | (((u32) (src) << 11) & 0x00000800)) +#define RXTX_REG8_SSC_ENABLE_SET(dst, src) \ + (((dst) & ~0x00000200) | (((u32) (src) << 9) & 0x00000200)) +#define RXTX_REG8_SD_VREF_SET(dst, src) \ + (((dst) & ~0x000000f0) | (((u32) (src) << 4) & 0x000000f0)) +#define RXTX_REG8_SD_DISABLE_SET(dst, src) \ + (((dst) & ~0x00000100) | (((u32) (src) << 8) & 0x00000100)) +#define RXTX_REG7 0x00e +#define RXTX_REG7_RESETB_RXD_SET(dst, src) \ + (((dst) & ~0x00000100) | (((u32) (src) << 8) & 0x00000100)) +#define RXTX_REG7_RESETB_RXA_SET(dst, src) \ + (((dst) & ~0x00000080) | (((u32) (src) << 7) & 0x00000080)) +#define RXTX_REG7_LOOP_BACK_ENA_CTLE_MASK 0x00004000 +#define RXTX_REG7_LOOP_BACK_ENA_CTLE_SET(dst, src) \ + (((dst) & ~0x00004000) | (((u32) (src) << 14) & 0x00004000)) +#define RXTX_REG11 0x016 +#define RXTX_REG11_PHASE_ADJUST_LIMIT_SET(dst, src) \ + (((dst) & ~0x0000f800) | (((u32) (src) << 11) & 0x0000f800)) +#define RXTX_REG12 0x018 +#define RXTX_REG12_LATCH_OFF_ENA_SET(dst, src) \ + (((dst) & ~0x00002000) | (((u32) (src) << 13) & 0x00002000)) +#define RXTX_REG12_SUMOS_ENABLE_SET(dst, src) \ + (((dst) & ~0x00000004) | (((u32) (src) << 2) & 0x00000004)) +#define RXTX_REG12_RX_DET_TERM_ENABLE_MASK 0x00000002 +#define RXTX_REG12_RX_DET_TERM_ENABLE_SET(dst, src) \ + (((dst) & ~0x00000002) | (((u32) (src) << 1) & 0x00000002)) +#define RXTX_REG13 0x01a +#define RXTX_REG14 0x01c +#define RXTX_REG14_CLTE_LATCAL_MAN_PROG_SET(dst, src) \ + (((dst) & ~0x0000003f) | (((u32) (src) << 0) & 0x0000003f)) +#define RXTX_REG14_CTLE_LATCAL_MAN_ENA_SET(dst, src) \ + (((dst) & ~0x00000040) | (((u32) (src) << 6) & 0x00000040)) +#define RXTX_REG26 0x034 +#define RXTX_REG26_PERIOD_ERROR_LATCH_SET(dst, src) \ + (((dst) & ~0x00003800) | (((u32) (src) << 11) & 0x00003800)) +#define RXTX_REG26_BLWC_ENA_SET(dst, src) \ + (((dst) & ~0x00000008) | (((u32) (src) << 3) & 0x00000008)) +#define RXTX_REG21 0x02a +#define RXTX_REG21_DO_LATCH_CALOUT_RD(src) ((0x0000fc00 & (u32) (src)) >> 10) +#define RXTX_REG21_XO_LATCH_CALOUT_RD(src) ((0x000003f0 & (u32) (src)) >> 4) +#define RXTX_REG21_LATCH_CAL_FAIL_ODD_RD(src) ((0x0000000f & (u32)(src))) +#define RXTX_REG22 0x02c +#define RXTX_REG22_SO_LATCH_CALOUT_RD(src) ((0x000003f0 & (u32) (src)) >> 4) +#define RXTX_REG22_EO_LATCH_CALOUT_RD(src) ((0x0000fc00 & (u32) (src)) >> 10) +#define RXTX_REG22_LATCH_CAL_FAIL_EVEN_RD(src) ((0x0000000f & (u32)(src))) +#define RXTX_REG23 0x02e +#define RXTX_REG23_DE_LATCH_CALOUT_RD(src) ((0x0000fc00 & (u32) (src)) >> 10) +#define RXTX_REG23_XE_LATCH_CALOUT_RD(src) ((0x000003f0 & (u32) (src)) >> 4) +#define RXTX_REG24 0x030 +#define RXTX_REG24_EE_LATCH_CALOUT_RD(src) ((0x0000fc00 & (u32) (src)) >> 10) +#define RXTX_REG24_SE_LATCH_CALOUT_RD(src) ((0x000003f0 & (u32) (src)) >> 4) +#define RXTX_REG27 0x036 +#define RXTX_REG28 0x038 +#define RXTX_REG31 0x03e +#define RXTX_REG38 0x04c +#define RXTX_REG38_CUSTOMER_PINMODE_INV_SET(dst, src) \ + (((dst) & 0x0000fffe) | (((u32) (src) << 1) & 0x0000fffe)) +#define RXTX_REG39 0x04e +#define RXTX_REG40 0x050 +#define RXTX_REG41 0x052 +#define RXTX_REG42 0x054 +#define RXTX_REG43 0x056 +#define RXTX_REG44 0x058 +#define RXTX_REG45 0x05a +#define RXTX_REG46 0x05c +#define RXTX_REG47 0x05e +#define RXTX_REG48 0x060 +#define RXTX_REG49 0x062 +#define RXTX_REG50 0x064 +#define RXTX_REG51 0x066 +#define RXTX_REG52 0x068 +#define RXTX_REG53 0x06a +#define RXTX_REG54 0x06c +#define RXTX_REG55 0x06e +#define RXTX_REG61 0x07a +#define RXTX_REG61_ISCAN_INBERT_SET(dst, src) \ + (((dst) & ~0x00000010) | (((u32) (src) << 4) & 0x00000010)) +#define RXTX_REG61_LOADFREQ_SHIFT_SET(dst, src) \ + (((dst) & ~0x00000008) | (((u32) (src) << 3) & 0x00000008)) +#define RXTX_REG61_EYE_COUNT_WIDTH_SEL_SET(dst, src) \ + (((dst) & ~0x000000c0) | (((u32) (src) << 6) & 0x000000c0)) +#define RXTX_REG61_SPD_SEL_CDR_SET(dst, src) \ + (((dst) & ~0x00003c00) | (((u32) (src) << 10) & 0x00003c00)) +#define RXTX_REG62 0x07c +#define RXTX_REG62_PERIOD_H1_QLATCH_SET(dst, src) \ + (((dst) & ~0x00003800) | (((u32) (src) << 11) & 0x00003800)) +#define RXTX_REG81 0x0a2 +#define RXTX_REG89_MU_TH7_SET(dst, src) \ + (((dst) & ~0x0000f800) | (((u32) (src) << 11) & 0x0000f800)) +#define RXTX_REG89_MU_TH8_SET(dst, src) \ + (((dst) & ~0x000007c0) | (((u32) (src) << 6) & 0x000007c0)) +#define RXTX_REG89_MU_TH9_SET(dst, src) \ + (((dst) & ~0x0000003e) | (((u32) (src) << 1) & 0x0000003e)) +#define RXTX_REG96 0x0c0 +#define RXTX_REG96_MU_FREQ1_SET(dst, src) \ + (((dst) & ~0x0000f800) | (((u32) (src) << 11) & 0x0000f800)) +#define RXTX_REG96_MU_FREQ2_SET(dst, src) \ + (((dst) & ~0x000007c0) | (((u32) (src) << 6) & 0x000007c0)) +#define RXTX_REG96_MU_FREQ3_SET(dst, src) \ + (((dst) & ~0x0000003e) | (((u32) (src) << 1) & 0x0000003e)) +#define RXTX_REG99 0x0c6 +#define RXTX_REG99_MU_PHASE1_SET(dst, src) \ + (((dst) & ~0x0000f800) | (((u32) (src) << 11) & 0x0000f800)) +#define RXTX_REG99_MU_PHASE2_SET(dst, src) \ + (((dst) & ~0x000007c0) | (((u32) (src) << 6) & 0x000007c0)) +#define RXTX_REG99_MU_PHASE3_SET(dst, src) \ + (((dst) & ~0x0000003e) | (((u32) (src) << 1) & 0x0000003e)) +#define RXTX_REG102 0x0cc +#define RXTX_REG102_FREQLOOP_LIMIT_SET(dst, src) \ + (((dst) & ~0x00000060) | (((u32) (src) << 5) & 0x00000060)) +#define RXTX_REG114 0x0e4 +#define RXTX_REG121 0x0f2 +#define RXTX_REG121_SUMOS_CAL_CODE_RD(src) ((0x0000003e & (u32)(src)) >> 0x1) +#define RXTX_REG125 0x0fa +#define RXTX_REG125_PQ_REG_SET(dst, src) \ + (((dst) & ~0x0000fe00) | (((u32) (src) << 9) & 0x0000fe00)) +#define RXTX_REG125_SIGN_PQ_SET(dst, src) \ + (((dst) & ~0x00000100) | (((u32) (src) << 8) & 0x00000100)) +#define RXTX_REG125_SIGN_PQ_2C_SET(dst, src) \ + (((dst) & ~0x00000080) | (((u32) (src) << 7) & 0x00000080)) +#define RXTX_REG125_PHZ_MANUALCODE_SET(dst, src) \ + (((dst) & ~0x0000007c) | (((u32) (src) << 2) & 0x0000007c)) +#define RXTX_REG125_PHZ_MANUAL_SET(dst, src) \ + (((dst) & ~0x00000002) | (((u32) (src) << 1) & 0x00000002)) +#define RXTX_REG127 0x0fe +#define RXTX_REG127_FORCE_SUM_CAL_START_MASK 0x00000002 +#define RXTX_REG127_FORCE_LAT_CAL_START_MASK 0x00000004 +#define RXTX_REG127_FORCE_SUM_CAL_START_SET(dst, src) \ + (((dst) & ~0x00000002) | (((u32) (src) << 1) & 0x00000002)) +#define RXTX_REG127_FORCE_LAT_CAL_START_SET(dst, src) \ + (((dst) & ~0x00000004) | (((u32) (src) << 2) & 0x00000004)) +#define RXTX_REG127_LATCH_MAN_CAL_ENA_SET(dst, src) \ + (((dst) & ~0x00000008) | (((u32) (src) << 3) & 0x00000008)) +#define RXTX_REG127_DO_LATCH_MANCAL_SET(dst, src) \ + (((dst) & ~0x0000fc00) | (((u32) (src) << 10) & 0x0000fc00)) +#define RXTX_REG127_XO_LATCH_MANCAL_SET(dst, src) \ + (((dst) & ~0x000003f0) | (((u32) (src) << 4) & 0x000003f0)) +#define RXTX_REG128 0x100 +#define RXTX_REG128_LATCH_CAL_WAIT_SEL_SET(dst, src) \ + (((dst) & ~0x0000000c) | (((u32) (src) << 2) & 0x0000000c)) +#define RXTX_REG128_EO_LATCH_MANCAL_SET(dst, src) \ + (((dst) & ~0x0000fc00) | (((u32) (src) << 10) & 0x0000fc00)) +#define RXTX_REG128_SO_LATCH_MANCAL_SET(dst, src) \ + (((dst) & ~0x000003f0) | (((u32) (src) << 4) & 0x000003f0)) +#define RXTX_REG129 0x102 +#define RXTX_REG129_DE_LATCH_MANCAL_SET(dst, src) \ + (((dst) & ~0x0000fc00) | (((u32) (src) << 10) & 0x0000fc00)) +#define RXTX_REG129_XE_LATCH_MANCAL_SET(dst, src) \ + (((dst) & ~0x000003f0) | (((u32) (src) << 4) & 0x000003f0)) +#define RXTX_REG130 0x104 +#define RXTX_REG130_EE_LATCH_MANCAL_SET(dst, src) \ + (((dst) & ~0x0000fc00) | (((u32) (src) << 10) & 0x0000fc00)) +#define RXTX_REG130_SE_LATCH_MANCAL_SET(dst, src) \ + (((dst) & ~0x000003f0) | (((u32) (src) << 4) & 0x000003f0)) +#define RXTX_REG145 0x122 +#define RXTX_REG145_TX_IDLE_SATA_SET(dst, src) \ + (((dst) & ~0x00000001) | (((u32) (src) << 0) & 0x00000001)) +#define RXTX_REG145_RXES_ENA_SET(dst, src) \ + (((dst) & ~0x00000002) | (((u32) (src) << 1) & 0x00000002)) +#define RXTX_REG145_RXDFE_CONFIG_SET(dst, src) \ + (((dst) & ~0x0000c000) | (((u32) (src) << 14) & 0x0000c000)) +#define RXTX_REG145_RXVWES_LATENA_SET(dst, src) \ + (((dst) & ~0x00000004) | (((u32) (src) << 2) & 0x00000004)) +#define RXTX_REG147 0x126 +#define RXTX_REG148 0x128 + +/* Clock macro type */ +enum cmu_type_t { + REF_CMU = 0, /* Clock macro is the internal reference clock */ + PHY_CMU = 1, /* Clock macro is the PLL for the Serdes */ +}; + +enum mux_type_t { + MUX_SELECT_ATA = 0, /* Switch the MUX to ATA */ + MUX_SELECT_SGMMII = 0, /* Switch the MUX to SGMII */ +}; + +enum clk_type_t { + CLK_EXT_DIFF = 0, /* External differential */ + CLK_INT_DIFF = 1, /* Internal differential */ + CLK_INT_SING = 2, /* Internal single ended */ +}; + +enum phy_mode { + MODE_SATA = 0, /* List them for simple reference */ + MODE_SGMII = 1, + MODE_PCIE = 2, + MODE_USB = 3, + MODE_XFI = 4, + MODE_MAX +}; + +struct xgene_sata_override_param { + u32 speed[MAX_LANE]; /* Index for override parameter per lane */ + u32 txspeed[3]; /* Tx speed */ + u32 txboostgain[MAX_LANE*3]; /* Tx freq boost and gain control */ + u32 txeyetuning[MAX_LANE*3]; /* Tx eye tuning */ + u32 txeyedirection[MAX_LANE*3]; /* Tx eye tuning direction */ + u32 txamplitude[MAX_LANE*3]; /* Tx amplitude control */ + u32 txprecursor_cn1[MAX_LANE*3]; /* Tx emphasis taps 1st pre-cursor */ + u32 txprecursor_cn2[MAX_LANE*3]; /* Tx emphasis taps 2nd pre-cursor */ + u32 txpostcursor_cp1[MAX_LANE*3]; /* Tx emphasis taps post-cursor */ +}; + +struct xgene_phy_ctx { + struct device *dev; + struct phy *phy; + enum phy_mode mode; /* Mode of operation */ + enum clk_type_t clk_type; /* Input clock selection */ + void __iomem *sds_base; /* PHY CSR base addr */ + struct clk *clk; /* Optional clock */ + + /* Override Serdes parameters */ + struct xgene_sata_override_param sata_param; +}; + +/* + * For chip earlier than A3 version, enable this flag. + * To enable, pass boot argument phy_xgene.preA3Chip=1 + */ +static int preA3Chip; +MODULE_PARM_DESC(preA3Chip, "Enable pre-A3 chip support (1=enable 0=disable)"); +module_param_named(preA3Chip, preA3Chip, int, 0444); + +static void sds_wr(void __iomem *csr_base, u32 indirect_cmd_reg, + u32 indirect_data_reg, u32 addr, u32 data) +{ + unsigned long deadline = jiffies + HZ; + u32 val; + u32 cmd; + + cmd = CFG_IND_WR_CMD_MASK | CFG_IND_CMD_DONE_MASK; + cmd = CFG_IND_ADDR_SET(cmd, addr); + writel(data, csr_base + indirect_data_reg); + readl(csr_base + indirect_data_reg); /* Force a barrier */ + writel(cmd, csr_base + indirect_cmd_reg); + readl(csr_base + indirect_cmd_reg); /* Force a barrier */ + do { + val = readl(csr_base + indirect_cmd_reg); + } while (!(val & CFG_IND_CMD_DONE_MASK) && + time_before(jiffies, deadline)); + if (!(val & CFG_IND_CMD_DONE_MASK)) + pr_err("SDS WR timeout at 0x%p offset 0x%08X value 0x%08X\n", + csr_base + indirect_cmd_reg, addr, data); +} + +static void sds_rd(void __iomem *csr_base, u32 indirect_cmd_reg, + u32 indirect_data_reg, u32 addr, u32 *data) +{ + unsigned long deadline = jiffies + HZ; + u32 val; + u32 cmd; + + cmd = CFG_IND_RD_CMD_MASK | CFG_IND_CMD_DONE_MASK; + cmd = CFG_IND_ADDR_SET(cmd, addr); + writel(cmd, csr_base + indirect_cmd_reg); + readl(csr_base + indirect_cmd_reg); /* Force a barrier */ + do { + val = readl(csr_base + indirect_cmd_reg); + } while (!(val & CFG_IND_CMD_DONE_MASK) && + time_before(jiffies, deadline)); + *data = readl(csr_base + indirect_data_reg); + if (!(val & CFG_IND_CMD_DONE_MASK)) + pr_err("SDS WR timeout at 0x%p offset 0x%08X value 0x%08X\n", + csr_base + indirect_cmd_reg, addr, *data); +} + +static void cmu_wr(struct xgene_phy_ctx *ctx, enum cmu_type_t cmu_type, + u32 reg, u32 data) +{ + void __iomem *sds_base = ctx->sds_base; + u32 val; + + if (cmu_type == REF_CMU) + reg += SERDES_PLL_REF_INDIRECT_OFFSET; + else + reg += SERDES_PLL_INDIRECT_OFFSET; + sds_wr(sds_base, SATA_ENET_SDS_IND_CMD_REG, + SATA_ENET_SDS_IND_WDATA_REG, reg, data); + sds_rd(sds_base, SATA_ENET_SDS_IND_CMD_REG, + SATA_ENET_SDS_IND_RDATA_REG, reg, &val); + pr_debug("CMU WR addr 0x%X value 0x%08X <-> 0x%08X\n", reg, data, val); +} + +static void cmu_rd(struct xgene_phy_ctx *ctx, enum cmu_type_t cmu_type, + u32 reg, u32 *data) +{ + void __iomem *sds_base = ctx->sds_base; + + if (cmu_type == REF_CMU) + reg += SERDES_PLL_REF_INDIRECT_OFFSET; + else + reg += SERDES_PLL_INDIRECT_OFFSET; + sds_rd(sds_base, SATA_ENET_SDS_IND_CMD_REG, + SATA_ENET_SDS_IND_RDATA_REG, reg, data); + pr_debug("CMU RD addr 0x%X value 0x%08X\n", reg, *data); +} + +static void cmu_toggle1to0(struct xgene_phy_ctx *ctx, enum cmu_type_t cmu_type, + u32 reg, u32 bits) +{ + u32 val; + + cmu_rd(ctx, cmu_type, reg, &val); + val |= bits; + cmu_wr(ctx, cmu_type, reg, val); + cmu_rd(ctx, cmu_type, reg, &val); + val &= ~bits; + cmu_wr(ctx, cmu_type, reg, val); +} + +static void cmu_clrbits(struct xgene_phy_ctx *ctx, enum cmu_type_t cmu_type, + u32 reg, u32 bits) +{ + u32 val; + + cmu_rd(ctx, cmu_type, reg, &val); + val &= ~bits; + cmu_wr(ctx, cmu_type, reg, val); +} + +static void cmu_setbits(struct xgene_phy_ctx *ctx, enum cmu_type_t cmu_type, + u32 reg, u32 bits) +{ + u32 val; + + cmu_rd(ctx, cmu_type, reg, &val); + val |= bits; + cmu_wr(ctx, cmu_type, reg, val); +} + +static void serdes_wr(struct xgene_phy_ctx *ctx, int lane, u32 reg, u32 data) +{ + void __iomem *sds_base = ctx->sds_base; + u32 val; + + reg += SERDES_INDIRECT_OFFSET; + reg += lane * SERDES_LANE_STRIDE; + sds_wr(sds_base, SATA_ENET_SDS_IND_CMD_REG, + SATA_ENET_SDS_IND_WDATA_REG, reg, data); + sds_rd(sds_base, SATA_ENET_SDS_IND_CMD_REG, + SATA_ENET_SDS_IND_RDATA_REG, reg, &val); + pr_debug("SERDES WR addr 0x%X value 0x%08X <-> 0x%08X\n", reg, data, + val); +} + +static void serdes_rd(struct xgene_phy_ctx *ctx, int lane, u32 reg, u32 *data) +{ + void __iomem *sds_base = ctx->sds_base; + + reg += SERDES_INDIRECT_OFFSET; + reg += lane * SERDES_LANE_STRIDE; + sds_rd(sds_base, SATA_ENET_SDS_IND_CMD_REG, + SATA_ENET_SDS_IND_RDATA_REG, reg, data); + pr_debug("SERDES RD addr 0x%X value 0x%08X\n", reg, *data); +} + +static void serdes_clrbits(struct xgene_phy_ctx *ctx, int lane, u32 reg, + u32 bits) +{ + u32 val; + + serdes_rd(ctx, lane, reg, &val); + val &= ~bits; + serdes_wr(ctx, lane, reg, val); +} + +static void serdes_setbits(struct xgene_phy_ctx *ctx, int lane, u32 reg, + u32 bits) +{ + u32 val; + + serdes_rd(ctx, lane, reg, &val); + val |= bits; + serdes_wr(ctx, lane, reg, val); +} + +static void xgene_phy_cfg_cmu_clk_type(struct xgene_phy_ctx *ctx, + enum cmu_type_t cmu_type, + enum clk_type_t clk_type) +{ + u32 val; + + /* Set the reset sequence delay for TX ready assertion */ + cmu_rd(ctx, cmu_type, CMU_REG12, &val); + val = CMU_REG12_STATE_DELAY9_SET(val, 0x1); + cmu_wr(ctx, cmu_type, CMU_REG12, val); + /* Set the programmable stage delays between various enable stages */ + cmu_wr(ctx, cmu_type, CMU_REG13, 0x0222); + cmu_wr(ctx, cmu_type, CMU_REG14, 0x2225); + + /* Configure clock type */ + if (clk_type == CLK_EXT_DIFF) { + /* Select external clock mux */ + cmu_rd(ctx, cmu_type, CMU_REG0, &val); + val = CMU_REG0_PLL_REF_SEL_SET(val, 0x0); + cmu_wr(ctx, cmu_type, CMU_REG0, val); + /* Select CMOS as reference clock */ + cmu_rd(ctx, cmu_type, CMU_REG1, &val); + val = CMU_REG1_REFCLK_CMOS_SEL_SET(val, 0x0); + cmu_wr(ctx, cmu_type, CMU_REG1, val); + dev_dbg(ctx->dev, "Set external reference clock\n"); + } else if (clk_type == CLK_INT_DIFF) { + /* Select internal clock mux */ + cmu_rd(ctx, cmu_type, CMU_REG0, &val); + val = CMU_REG0_PLL_REF_SEL_SET(val, 0x1); + cmu_wr(ctx, cmu_type, CMU_REG0, val); + /* Select CMOS as reference clock */ + cmu_rd(ctx, cmu_type, CMU_REG1, &val); + val = CMU_REG1_REFCLK_CMOS_SEL_SET(val, 0x1); + cmu_wr(ctx, cmu_type, CMU_REG1, val); + dev_dbg(ctx->dev, "Set internal reference clock\n"); + } else if (clk_type == CLK_INT_SING) { + /* + * NOTE: This clock type is NOT support for controller + * whose internal clock shared in the PCIe controller + * + * Select internal clock mux + */ + cmu_rd(ctx, cmu_type, CMU_REG1, &val); + val = CMU_REG1_REFCLK_CMOS_SEL_SET(val, 0x1); + cmu_wr(ctx, cmu_type, CMU_REG1, val); + /* Select CML as reference clock */ + cmu_rd(ctx, cmu_type, CMU_REG1, &val); + val = CMU_REG1_REFCLK_CMOS_SEL_SET(val, 0x0); + cmu_wr(ctx, cmu_type, CMU_REG1, val); + dev_dbg(ctx->dev, + "Set internal single ended reference clock\n"); + } +} + +static void xgene_phy_sata_cfg_cmu_core(struct xgene_phy_ctx *ctx, + enum cmu_type_t cmu_type, + enum clk_type_t clk_type) +{ + u32 val; + int ref_100MHz; + + if (cmu_type == REF_CMU) { + /* Set VCO calibration voltage threshold */ + cmu_rd(ctx, cmu_type, CMU_REG34, &val); + val = CMU_REG34_VCO_CAL_VTH_LO_MAX_SET(val, 0x7); + val = CMU_REG34_VCO_CAL_VTH_HI_MAX_SET(val, 0xc); + val = CMU_REG34_VCO_CAL_VTH_LO_MIN_SET(val, 0x3); + val = CMU_REG34_VCO_CAL_VTH_HI_MIN_SET(val, 0x8); + cmu_wr(ctx, cmu_type, CMU_REG34, val); + } + + /* Set the VCO calibration counter */ + cmu_rd(ctx, cmu_type, CMU_REG0, &val); + if (cmu_type == REF_CMU || preA3Chip) + val = CMU_REG0_CAL_COUNT_RESOL_SET(val, 0x4); + else + val = CMU_REG0_CAL_COUNT_RESOL_SET(val, 0x7); + cmu_wr(ctx, cmu_type, CMU_REG0, val); + + /* Configure PLL for calibration */ + cmu_rd(ctx, cmu_type, CMU_REG1, &val); + val = CMU_REG1_PLL_CP_SET(val, 0x1); + if (cmu_type == REF_CMU || preA3Chip) + val = CMU_REG1_PLL_CP_SEL_SET(val, 0x5); + else + val = CMU_REG1_PLL_CP_SEL_SET(val, 0x3); + if (cmu_type == REF_CMU) + val = CMU_REG1_PLL_MANUALCAL_SET(val, 0x0); + else + val = CMU_REG1_PLL_MANUALCAL_SET(val, 0x1); + cmu_wr(ctx, cmu_type, CMU_REG1, val); + + if (cmu_type != REF_CMU) + cmu_clrbits(ctx, cmu_type, CMU_REG5, CMU_REG5_PLL_RESETB_MASK); + + /* Configure the PLL for either 100MHz or 50MHz */ + cmu_rd(ctx, cmu_type, CMU_REG2, &val); + if (cmu_type == REF_CMU) { + val = CMU_REG2_PLL_LFRES_SET(val, 0xa); + ref_100MHz = 1; + } else { + val = CMU_REG2_PLL_LFRES_SET(val, 0x3); + if (clk_type == CLK_EXT_DIFF) + ref_100MHz = 0; + else + ref_100MHz = 1; + } + if (ref_100MHz) { + val = CMU_REG2_PLL_FBDIV_SET(val, FBDIV_VAL_100M); + val = CMU_REG2_PLL_REFDIV_SET(val, REFDIV_VAL_100M); + } else { + val = CMU_REG2_PLL_FBDIV_SET(val, FBDIV_VAL_50M); + val = CMU_REG2_PLL_REFDIV_SET(val, REFDIV_VAL_50M); + } + cmu_wr(ctx, cmu_type, CMU_REG2, val); + + /* Configure the VCO */ + cmu_rd(ctx, cmu_type, CMU_REG3, &val); + if (cmu_type == REF_CMU) { + val = CMU_REG3_VCOVARSEL_SET(val, 0x3); + val = CMU_REG3_VCO_MOMSEL_INIT_SET(val, 0x10); + } else { + val = CMU_REG3_VCOVARSEL_SET(val, 0xF); + if (preA3Chip) + val = CMU_REG3_VCO_MOMSEL_INIT_SET(val, 0x15); + else + val = CMU_REG3_VCO_MOMSEL_INIT_SET(val, 0x1a); + val = CMU_REG3_VCO_MANMOMSEL_SET(val, 0x15); + } + cmu_wr(ctx, cmu_type, CMU_REG3, val); + + /* Disable force PLL lock */ + cmu_rd(ctx, cmu_type, CMU_REG26, &val); + val = CMU_REG26_FORCE_PLL_LOCK_SET(val, 0x0); + cmu_wr(ctx, cmu_type, CMU_REG26, val); + + /* Setup PLL loop filter */ + cmu_rd(ctx, cmu_type, CMU_REG5, &val); + val = CMU_REG5_PLL_LFSMCAP_SET(val, 0x3); + val = CMU_REG5_PLL_LFCAP_SET(val, 0x3); + if (cmu_type == REF_CMU || !preA3Chip) + val = CMU_REG5_PLL_LOCK_RESOLUTION_SET(val, 0x7); + else + val = CMU_REG5_PLL_LOCK_RESOLUTION_SET(val, 0x4); + cmu_wr(ctx, cmu_type, CMU_REG5, val); + + /* Enable or disable manual calibration */ + cmu_rd(ctx, cmu_type, CMU_REG6, &val); + val = CMU_REG6_PLL_VREGTRIM_SET(val, preA3Chip ? 0x0 : 0x2); + val = CMU_REG6_MAN_PVT_CAL_SET(val, preA3Chip ? 0x1 : 0x0); + cmu_wr(ctx, cmu_type, CMU_REG6, val); + + /* Configure lane for 20-bits */ + if (cmu_type == PHY_CMU) { + cmu_rd(ctx, cmu_type, CMU_REG9, &val); + val = CMU_REG9_TX_WORD_MODE_CH1_SET(val, + CMU_REG9_WORD_LEN_20BIT); + val = CMU_REG9_TX_WORD_MODE_CH0_SET(val, + CMU_REG9_WORD_LEN_20BIT); + val = CMU_REG9_PLL_POST_DIVBY2_SET(val, 0x1); + if (!preA3Chip) { + val = CMU_REG9_VBG_BYPASSB_SET(val, 0x0); + val = CMU_REG9_IGEN_BYPASS_SET(val , 0x0); + } + cmu_wr(ctx, cmu_type, CMU_REG9, val); + + if (!preA3Chip) { + cmu_rd(ctx, cmu_type, CMU_REG10, &val); + val = CMU_REG10_VREG_REFSEL_SET(val, 0x1); + cmu_wr(ctx, cmu_type, CMU_REG10, val); + } + } + + cmu_rd(ctx, cmu_type, CMU_REG16, &val); + val = CMU_REG16_CALIBRATION_DONE_OVERRIDE_SET(val, 0x1); + val = CMU_REG16_BYPASS_PLL_LOCK_SET(val, 0x1); + if (cmu_type == REF_CMU || preA3Chip) + val = CMU_REG16_VCOCAL_WAIT_BTW_CODE_SET(val, 0x4); + else + val = CMU_REG16_VCOCAL_WAIT_BTW_CODE_SET(val, 0x7); + cmu_wr(ctx, cmu_type, CMU_REG16, val); + + /* Configure for SATA */ + cmu_rd(ctx, cmu_type, CMU_REG30, &val); + val = CMU_REG30_PCIE_MODE_SET(val, 0x0); + val = CMU_REG30_LOCK_COUNT_SET(val, 0x3); + cmu_wr(ctx, cmu_type, CMU_REG30, val); + + /* Disable state machine bypass */ + cmu_wr(ctx, cmu_type, CMU_REG31, 0xF); + + cmu_rd(ctx, cmu_type, CMU_REG32, &val); + val = CMU_REG32_PVT_CAL_WAIT_SEL_SET(val, 0x3); + if (cmu_type == REF_CMU || preA3Chip) + val = CMU_REG32_IREF_ADJ_SET(val, 0x3); + else + val = CMU_REG32_IREF_ADJ_SET(val, 0x1); + cmu_wr(ctx, cmu_type, CMU_REG32, val); + + /* Set VCO calibration threshold */ + if (cmu_type != REF_CMU && preA3Chip) + cmu_wr(ctx, cmu_type, CMU_REG34, 0x8d27); + else + cmu_wr(ctx, cmu_type, CMU_REG34, 0x873c); + + /* Set CTLE Override and override waiting from state machine */ + cmu_wr(ctx, cmu_type, CMU_REG37, 0xF00F); +} + +static void xgene_phy_ssc_enable(struct xgene_phy_ctx *ctx, + enum cmu_type_t cmu_type) +{ + u32 val; + + /* Set SSC modulation value */ + cmu_rd(ctx, cmu_type, CMU_REG35, &val); + val = CMU_REG35_PLL_SSC_MOD_SET(val, 98); + cmu_wr(ctx, cmu_type, CMU_REG35, val); + + /* Enable SSC, set vertical step and DSM value */ + cmu_rd(ctx, cmu_type, CMU_REG36, &val); + val = CMU_REG36_PLL_SSC_VSTEP_SET(val, 30); + val = CMU_REG36_PLL_SSC_EN_SET(val, 1); + val = CMU_REG36_PLL_SSC_DSMSEL_SET(val, 1); + cmu_wr(ctx, cmu_type, CMU_REG36, val); + + /* Reset the PLL */ + cmu_clrbits(ctx, cmu_type, CMU_REG5, CMU_REG5_PLL_RESETB_MASK); + cmu_setbits(ctx, cmu_type, CMU_REG5, CMU_REG5_PLL_RESETB_MASK); + + /* Force VCO calibration to restart */ + cmu_toggle1to0(ctx, cmu_type, CMU_REG32, + CMU_REG32_FORCE_VCOCAL_START_MASK); +} + +static void xgene_phy_sata_cfg_lanes(struct xgene_phy_ctx *ctx) +{ + u32 val; + u32 reg; + int i; + int lane; + + for (lane = 0; lane < MAX_LANE; lane++) { + serdes_wr(ctx, lane, RXTX_REG147, 0x6); + + /* Set boost control for quarter, half, and full rate */ + serdes_rd(ctx, lane, RXTX_REG0, &val); + val = RXTX_REG0_CTLE_EQ_HR_SET(val, 0x10); + val = RXTX_REG0_CTLE_EQ_QR_SET(val, 0x10); + val = RXTX_REG0_CTLE_EQ_FR_SET(val, 0x10); + serdes_wr(ctx, lane, RXTX_REG0, val); + + /* Set boost control value */ + serdes_rd(ctx, lane, RXTX_REG1, &val); + val = RXTX_REG1_RXACVCM_SET(val, 0x7); + val = RXTX_REG1_CTLE_EQ_SET(val, + ctx->sata_param.txboostgain[lane * 3 + + ctx->sata_param.speed[lane]]); + serdes_wr(ctx, lane, RXTX_REG1, val); + + /* Latch VTT value based on the termination to ground and + enable TX FIFO */ + serdes_rd(ctx, lane, RXTX_REG2, &val); + val = RXTX_REG2_VTT_ENA_SET(val, 0x1); + val = RXTX_REG2_VTT_SEL_SET(val, 0x1); + val = RXTX_REG2_TX_FIFO_ENA_SET(val, 0x1); + serdes_wr(ctx, lane, RXTX_REG2, val); + + /* Configure Tx for 20-bits */ + serdes_rd(ctx, lane, RXTX_REG4, &val); + val = RXTX_REG4_TX_WORD_MODE_SET(val, CMU_REG9_WORD_LEN_20BIT); + serdes_wr(ctx, lane, RXTX_REG4, val); + + if (!preA3Chip) { + serdes_rd(ctx, lane, RXTX_REG1, &val); + val = RXTX_REG1_RXVREG1_SET(val, 0x2); + val = RXTX_REG1_RXIREF_ADJ_SET(val, 0x2); + serdes_wr(ctx, lane, RXTX_REG1, val); + } + + /* Set pre-emphasis first 1 and 2, and post-emphasis values */ + serdes_rd(ctx, lane, RXTX_REG5, &val); + val = RXTX_REG5_TX_CN1_SET(val, + ctx->sata_param.txprecursor_cn1[lane * 3 + + ctx->sata_param.speed[lane]]); + val = RXTX_REG5_TX_CP1_SET(val, + ctx->sata_param.txpostcursor_cp1[lane * 3 + + ctx->sata_param.speed[lane]]); + val = RXTX_REG5_TX_CN2_SET(val, + ctx->sata_param.txprecursor_cn2[lane * 3 + + ctx->sata_param.speed[lane]]); + serdes_wr(ctx, lane, RXTX_REG5, val); + + /* Set TX amplitude value */ + serdes_rd(ctx, lane, RXTX_REG6, &val); + val = RXTX_REG6_TXAMP_CNTL_SET(val, + ctx->sata_param.txamplitude[lane * 3 + + ctx->sata_param.speed[lane]]); + val = RXTX_REG6_TXAMP_ENA_SET(val, 0x1); + val = RXTX_REG6_TX_IDLE_SET(val, 0x0); + val = RXTX_REG6_RX_BIST_RESYNC_SET(val, 0x0); + val = RXTX_REG6_RX_BIST_ERRCNT_RD_SET(val, 0x0); + serdes_wr(ctx, lane, RXTX_REG6, val); + + /* Configure Rx for 20-bits */ + serdes_rd(ctx, lane, RXTX_REG7, &val); + val = RXTX_REG7_BIST_ENA_RX_SET(val, 0x0); + val = RXTX_REG7_RX_WORD_MODE_SET(val, CMU_REG9_WORD_LEN_20BIT); + serdes_wr(ctx, lane, RXTX_REG7, val); + + /* Set CDR and LOS values and enable Rx SSC */ + serdes_rd(ctx, lane, RXTX_REG8, &val); + val = RXTX_REG8_CDR_LOOP_ENA_SET(val, 0x1); + val = RXTX_REG8_CDR_BYPASS_RXLOS_SET(val, 0x0); + val = RXTX_REG8_SSC_ENABLE_SET(val, 0x1); + val = RXTX_REG8_SD_DISABLE_SET(val, 0x0); + val = RXTX_REG8_SD_VREF_SET(val, 0x4); + serdes_wr(ctx, lane, RXTX_REG8, val); + + /* Set phase adjust upper/lower limits */ + serdes_rd(ctx, lane, RXTX_REG11, &val); + val = RXTX_REG11_PHASE_ADJUST_LIMIT_SET(val, 0x0); + serdes_wr(ctx, lane, RXTX_REG11, val); + + /* Enable Latch Off; disable SUMOS and Tx termination */ + serdes_rd(ctx, lane, RXTX_REG12, &val); + val = RXTX_REG12_LATCH_OFF_ENA_SET(val, 0x1); + val = RXTX_REG12_SUMOS_ENABLE_SET(val, 0x0); + val = RXTX_REG12_RX_DET_TERM_ENABLE_SET(val, 0x0); + serdes_wr(ctx, lane, RXTX_REG12, val); + + /* Set period error latch to 512T and enable BWL */ + serdes_rd(ctx, lane, RXTX_REG26, &val); + val = RXTX_REG26_PERIOD_ERROR_LATCH_SET(val, 0x0); + val = RXTX_REG26_BLWC_ENA_SET(val, 0x1); + serdes_wr(ctx, lane, RXTX_REG26, val); + + serdes_wr(ctx, lane, RXTX_REG28, 0x0); + + /* Set DFE loop preset value */ + serdes_wr(ctx, lane, RXTX_REG31, 0x0); + + /* Set Eye Monitor counter width to 12-bit */ + serdes_rd(ctx, lane, RXTX_REG61, &val); + val = RXTX_REG61_ISCAN_INBERT_SET(val, 0x1); + val = RXTX_REG61_LOADFREQ_SHIFT_SET(val, 0x0); + val = RXTX_REG61_EYE_COUNT_WIDTH_SEL_SET(val, 0x0); + serdes_wr(ctx, lane, RXTX_REG61, val); + + serdes_rd(ctx, lane, RXTX_REG62, &val); + val = RXTX_REG62_PERIOD_H1_QLATCH_SET(val, 0x0); + serdes_wr(ctx, lane, RXTX_REG62, val); + + /* Set BW select tap X for DFE loop */ + for (i = 0; i < 9; i++) { + reg = RXTX_REG81 + i * 2; + serdes_rd(ctx, lane, reg, &val); + val = RXTX_REG89_MU_TH7_SET(val, 0xe); + val = RXTX_REG89_MU_TH8_SET(val, 0xe); + val = RXTX_REG89_MU_TH9_SET(val, 0xe); + serdes_wr(ctx, lane, reg, val); + } + + /* Set BW select tap X for frequency adjust loop */ + for (i = 0; i < 3; i++) { + reg = RXTX_REG96 + i * 2; + serdes_rd(ctx, lane, reg, &val); + val = RXTX_REG96_MU_FREQ1_SET(val, 0x10); + val = RXTX_REG96_MU_FREQ2_SET(val, 0x10); + val = RXTX_REG96_MU_FREQ3_SET(val, 0x10); + serdes_wr(ctx, lane, reg, val); + } + + /* Set BW select tap X for phase adjust loop */ + for (i = 0; i < 3; i++) { + reg = RXTX_REG99 + i * 2; + serdes_rd(ctx, lane, reg, &val); + val = RXTX_REG99_MU_PHASE1_SET(val, 0x7); + val = RXTX_REG99_MU_PHASE2_SET(val, 0x7); + val = RXTX_REG99_MU_PHASE3_SET(val, 0x7); + serdes_wr(ctx, lane, reg, val); + } + + serdes_rd(ctx, lane, RXTX_REG102, &val); + val = RXTX_REG102_FREQLOOP_LIMIT_SET(val, 0x0); + serdes_wr(ctx, lane, RXTX_REG102, val); + + serdes_wr(ctx, lane, RXTX_REG114, 0xffe0); + + serdes_rd(ctx, lane, RXTX_REG125, &val); + val = RXTX_REG125_SIGN_PQ_SET(val, + ctx->sata_param.txeyedirection[lane * 3 + + ctx->sata_param.speed[lane]]); + val = RXTX_REG125_PQ_REG_SET(val, + ctx->sata_param.txeyetuning[lane * 3 + + ctx->sata_param.speed[lane]]); + val = RXTX_REG125_PHZ_MANUAL_SET(val, 0x1); + serdes_wr(ctx, lane, RXTX_REG125, val); + + serdes_rd(ctx, lane, RXTX_REG127, &val); + val = RXTX_REG127_LATCH_MAN_CAL_ENA_SET(val, 0x0); + serdes_wr(ctx, lane, RXTX_REG127, val); + + serdes_rd(ctx, lane, RXTX_REG128, &val); + val = RXTX_REG128_LATCH_CAL_WAIT_SEL_SET(val, 0x3); + serdes_wr(ctx, lane, RXTX_REG128, val); + + serdes_rd(ctx, lane, RXTX_REG145, &val); + val = RXTX_REG145_RXDFE_CONFIG_SET(val, 0x3); + val = RXTX_REG145_TX_IDLE_SATA_SET(val, 0x0); + if (preA3Chip) { + val = RXTX_REG145_RXES_ENA_SET(val, 0x1); + val = RXTX_REG145_RXVWES_LATENA_SET(val, 0x1); + } else { + val = RXTX_REG145_RXES_ENA_SET(val, 0x0); + val = RXTX_REG145_RXVWES_LATENA_SET(val, 0x0); + } + serdes_wr(ctx, lane, RXTX_REG145, val); + + /* + * Set Rx LOS filter clock rate, sample rate, and threshold + * windows + */ + for (i = 0; i < 4; i++) { + reg = RXTX_REG148 + i * 2; + serdes_wr(ctx, lane, reg, 0xFFFF); + } + } +} + +static int xgene_phy_cal_rdy_chk(struct xgene_phy_ctx *ctx, + enum cmu_type_t cmu_type, + enum clk_type_t clk_type) +{ + void __iomem *csr_serdes = ctx->sds_base; + int loop; + u32 val; + + /* Release PHY main reset */ + writel(0xdf, csr_serdes + SATA_ENET_SDS_RST_CTL); + readl(csr_serdes + SATA_ENET_SDS_RST_CTL); /* Force a barrier */ + + if (cmu_type != REF_CMU) { + cmu_setbits(ctx, cmu_type, CMU_REG5, CMU_REG5_PLL_RESETB_MASK); + /* + * As per PHY design spec, the PLL reset requires a minimum + * of 800us. + */ + usleep_range(800, 1000); + + cmu_rd(ctx, cmu_type, CMU_REG1, &val); + val = CMU_REG1_PLL_MANUALCAL_SET(val, 0x0); + cmu_wr(ctx, cmu_type, CMU_REG1, val); + /* + * As per PHY design spec, the PLL auto calibration requires + * a minimum of 800us. + */ + usleep_range(800, 1000); + + cmu_toggle1to0(ctx, cmu_type, CMU_REG32, + CMU_REG32_FORCE_VCOCAL_START_MASK); + /* + * As per PHY design spec, the PLL requires a minimum of + * 800us to settle. + */ + usleep_range(800, 1000); + } + + if (!preA3Chip) + goto skip_manual_cal; + + /* + * Configure the termination resister calibration + * The serial receive pins, RXP/RXN, have TERMination resistor + * that is required to be calibrated. + */ + cmu_rd(ctx, cmu_type, CMU_REG17, &val); + val = CMU_REG17_PVT_CODE_R2A_SET(val, 0x12); + val = CMU_REG17_RESERVED_7_SET(val, 0x0); + cmu_wr(ctx, cmu_type, CMU_REG17, val); + cmu_toggle1to0(ctx, cmu_type, CMU_REG17, + CMU_REG17_PVT_TERM_MAN_ENA_MASK); + /* + * The serial transmit pins, TXP/TXN, have Pull-UP and Pull-DOWN + * resistors that are required to the calibrated. + * Configure the pull DOWN calibration + */ + cmu_rd(ctx, cmu_type, CMU_REG17, &val); + val = CMU_REG17_PVT_CODE_R2A_SET(val, 0x29); + val = CMU_REG17_RESERVED_7_SET(val, 0x0); + cmu_wr(ctx, cmu_type, CMU_REG17, val); + cmu_toggle1to0(ctx, cmu_type, CMU_REG16, + CMU_REG16_PVT_DN_MAN_ENA_MASK); + /* Configure the pull UP calibration */ + cmu_rd(ctx, cmu_type, CMU_REG17, &val); + val = CMU_REG17_PVT_CODE_R2A_SET(val, 0x28); + val = CMU_REG17_RESERVED_7_SET(val, 0x0); + cmu_wr(ctx, cmu_type, CMU_REG17, val); + cmu_toggle1to0(ctx, cmu_type, CMU_REG16, + CMU_REG16_PVT_UP_MAN_ENA_MASK); + +skip_manual_cal: + /* Poll the PLL calibration completion status for at least 1 ms */ + loop = 100; + do { + cmu_rd(ctx, cmu_type, CMU_REG7, &val); + if (CMU_REG7_PLL_CALIB_DONE_RD(val)) + break; + /* + * As per PHY design spec, PLL calibration status requires + * a minimum of 10us to be updated. + */ + usleep_range(10, 100); + } while (--loop > 0); + + cmu_rd(ctx, cmu_type, CMU_REG7, &val); + dev_dbg(ctx->dev, "PLL calibration %s\n", + CMU_REG7_PLL_CALIB_DONE_RD(val) ? "done" : "failed"); + if (CMU_REG7_VCO_CAL_FAIL_RD(val)) { + dev_err(ctx->dev, + "PLL calibration failed due to VCO failure\n"); + return -1; + } + dev_dbg(ctx->dev, "PLL calibration successful\n"); + + cmu_rd(ctx, cmu_type, CMU_REG15, &val); + dev_dbg(ctx->dev, "PHY Tx is %sready\n", val & 0x300 ? "" : "not "); + return 0; +} + +static void xgene_phy_pdwn_force_vco(struct xgene_phy_ctx *ctx, + enum cmu_type_t cmu_type, + enum clk_type_t clk_type) +{ + u32 val; + + dev_dbg(ctx->dev, "Reset VCO and re-start again\n"); + if (cmu_type == PHY_CMU) { + cmu_rd(ctx, cmu_type, CMU_REG16, &val); + val = CMU_REG16_VCOCAL_WAIT_BTW_CODE_SET(val, 0x7); + cmu_wr(ctx, cmu_type, CMU_REG16, val); + } + + cmu_toggle1to0(ctx, cmu_type, CMU_REG0, CMU_REG0_PDOWN_MASK); + cmu_toggle1to0(ctx, cmu_type, CMU_REG32, + CMU_REG32_FORCE_VCOCAL_START_MASK); +} + +static int xgene_phy_hw_init_sata(struct xgene_phy_ctx *ctx, + enum clk_type_t clk_type, int ssc_enable) +{ + void __iomem *sds_base = ctx->sds_base; + u32 val; + int i; + + /* Configure the PHY for operation */ + dev_dbg(ctx->dev, "Reset PHY\n"); + /* Place PHY into reset */ + writel(0x0, sds_base + SATA_ENET_SDS_RST_CTL); + val = readl(sds_base + SATA_ENET_SDS_RST_CTL); /* Force a barrier */ + /* Release PHY lane from reset (active high) */ + writel(0x20, sds_base + SATA_ENET_SDS_RST_CTL); + readl(sds_base + SATA_ENET_SDS_RST_CTL); /* Force a barrier */ + /* Release all PHY module out of reset except PHY main reset */ + writel(0xde, sds_base + SATA_ENET_SDS_RST_CTL); + readl(sds_base + SATA_ENET_SDS_RST_CTL); /* Force a barrier */ + + /* Set the operation speed */ + val = readl(sds_base + SATA_ENET_SDS_CTL1); + val = CFG_I_SPD_SEL_CDR_OVR1_SET(val, + ctx->sata_param.txspeed[ctx->sata_param.speed[0]]); + writel(val, sds_base + SATA_ENET_SDS_CTL1); + + dev_dbg(ctx->dev, "Set the customer pin mode to SATA\n"); + val = readl(sds_base + SATA_ENET_SDS_CTL0); + val = REGSPEC_CFG_I_CUSTOMER_PIN_MODE0_SET(val, 0x4421); + writel(val, sds_base + SATA_ENET_SDS_CTL0); + + /* Configure the clock macro unit (CMU) clock type */ + xgene_phy_cfg_cmu_clk_type(ctx, PHY_CMU, clk_type); + + /* Configure the clock macro */ + xgene_phy_sata_cfg_cmu_core(ctx, PHY_CMU, clk_type); + + /* Enable SSC if enabled */ + if (ssc_enable) + xgene_phy_ssc_enable(ctx, PHY_CMU); + + /* Configure PHY lanes */ + xgene_phy_sata_cfg_lanes(ctx); + + /* Set Rx/Tx 20-bit */ + val = readl(sds_base + SATA_ENET_SDS_PCS_CTL0); + val = REGSPEC_CFG_I_RX_WORDMODE0_SET(val, 0x3); + val = REGSPEC_CFG_I_TX_WORDMODE0_SET(val, 0x3); + writel(val, sds_base + SATA_ENET_SDS_PCS_CTL0); + + /* Start PLL calibration and try for three times */ + i = 10; + do { + if (!xgene_phy_cal_rdy_chk(ctx, PHY_CMU, clk_type)) + break; + /* If failed, toggle the VCO power signal and start again */ + xgene_phy_pdwn_force_vco(ctx, PHY_CMU, clk_type); + } while (--i > 0); + /* Even on failure, allow to continue any way */ + if (i <= 0) + dev_err(ctx->dev, "PLL calibration failed\n"); + + return 0; +} + +static int xgene_phy_hw_initialize(struct xgene_phy_ctx *ctx, + enum clk_type_t clk_type, + int ssc_enable) +{ + int rc; + + dev_dbg(ctx->dev, "PHY init clk type %d\n", clk_type); + + if (ctx->mode == MODE_SATA) { + rc = xgene_phy_hw_init_sata(ctx, clk_type, ssc_enable); + if (rc) + return rc; + } else { + dev_err(ctx->dev, "Un-supported customer pin mode %d\n", + ctx->mode); + return -ENODEV; + } + + return 0; +} + +/* + * Receiver Offset Calibration: + * + * Calibrate the receiver signal path offset in two steps - summar and + * latch calibrations + */ +static void xgene_phy_force_lat_summer_cal(struct xgene_phy_ctx *ctx, int lane) +{ + int i; + struct { + u32 reg; + u32 val; + } serdes_reg[] = { + {RXTX_REG38, 0x0}, + {RXTX_REG39, 0xff00}, + {RXTX_REG40, 0xffff}, + {RXTX_REG41, 0xffff}, + {RXTX_REG42, 0xffff}, + {RXTX_REG43, 0xffff}, + {RXTX_REG44, 0xffff}, + {RXTX_REG45, 0xffff}, + {RXTX_REG46, 0xffff}, + {RXTX_REG47, 0xfffc}, + {RXTX_REG48, 0x0}, + {RXTX_REG49, 0x0}, + {RXTX_REG50, 0x0}, + {RXTX_REG51, 0x0}, + {RXTX_REG52, 0x0}, + {RXTX_REG53, 0x0}, + {RXTX_REG54, 0x0}, + {RXTX_REG55, 0x0}, + }; + + /* Start SUMMER calibration */ + serdes_setbits(ctx, lane, RXTX_REG127, + RXTX_REG127_FORCE_SUM_CAL_START_MASK); + /* + * As per PHY design spec, the Summer calibration requires a minimum + * of 100us to complete. + */ + usleep_range(100, 500); + serdes_clrbits(ctx, lane, RXTX_REG127, + RXTX_REG127_FORCE_SUM_CAL_START_MASK); + /* + * As per PHY design spec, the auto calibration requires a minimum + * of 100us to complete. + */ + usleep_range(100, 500); + + /* Start latch calibration */ + serdes_setbits(ctx, lane, RXTX_REG127, + RXTX_REG127_FORCE_LAT_CAL_START_MASK); + /* + * As per PHY design spec, the latch calibration requires a minimum + * of 100us to complete. + */ + usleep_range(100, 500); + serdes_clrbits(ctx, lane, RXTX_REG127, + RXTX_REG127_FORCE_LAT_CAL_START_MASK); + + /* Configure the PHY lane for calibration */ + serdes_wr(ctx, lane, RXTX_REG28, 0x7); + serdes_wr(ctx, lane, RXTX_REG31, 0x7e00); + serdes_clrbits(ctx, lane, RXTX_REG4, + RXTX_REG4_TX_LOOPBACK_BUF_EN_MASK); + serdes_clrbits(ctx, lane, RXTX_REG7, + RXTX_REG7_LOOP_BACK_ENA_CTLE_MASK); + for (i = 0; i < ARRAY_SIZE(serdes_reg); i++) + serdes_wr(ctx, lane, serdes_reg[i].reg, + serdes_reg[i].val); +} + +static void xgene_phy_reset_rxd(struct xgene_phy_ctx *ctx, int lane) +{ + /* Reset digital Rx */ + serdes_clrbits(ctx, lane, RXTX_REG7, RXTX_REG7_RESETB_RXD_MASK); + /* As per PHY design spec, the reset requires a minimum of 100us. */ + usleep_range(100, 150); + serdes_setbits(ctx, lane, RXTX_REG7, RXTX_REG7_RESETB_RXD_MASK); +} + +static int xgene_phy_get_avg(int accum, int samples) +{ + return (accum + (samples / 2)) / samples; +} + +static void xgene_phy_gen_avg_val(struct xgene_phy_ctx *ctx, int lane) +{ + int max_loop = 10; + int avg_loop = 0; + int lat_do = 0, lat_xo = 0, lat_eo = 0, lat_so = 0; + int lat_de = 0, lat_xe = 0, lat_ee = 0, lat_se = 0; + int sum_cal = 0; + int lat_do_itr, lat_xo_itr, lat_eo_itr, lat_so_itr; + int lat_de_itr, lat_xe_itr, lat_ee_itr, lat_se_itr; + int sum_cal_itr; + int fail_even; + int fail_odd; + u32 val; + + dev_dbg(ctx->dev, "Generating avg calibration value for lane %d\n", + lane); + + /* Enable RX Hi-Z termination */ + serdes_setbits(ctx, lane, RXTX_REG12, + RXTX_REG12_RX_DET_TERM_ENABLE_MASK); + /* Turn off DFE */ + serdes_wr(ctx, lane, RXTX_REG28, 0x0000); + /* DFE Presets to zero */ + serdes_wr(ctx, lane, RXTX_REG31, 0x0000); + + /* + * Receiver Offset Calibration: + * Calibrate the receiver signal path offset in two steps - summar + * and latch calibration. + * Runs the "Receiver Offset Calibration multiple times to determine + * the average value to use. + */ + while (avg_loop < max_loop) { + /* Start the calibration */ + xgene_phy_force_lat_summer_cal(ctx, lane); + + serdes_rd(ctx, lane, RXTX_REG21, &val); + lat_do_itr = RXTX_REG21_DO_LATCH_CALOUT_RD(val); + lat_xo_itr = RXTX_REG21_XO_LATCH_CALOUT_RD(val); + fail_odd = RXTX_REG21_LATCH_CAL_FAIL_ODD_RD(val); + + serdes_rd(ctx, lane, RXTX_REG22, &val); + lat_eo_itr = RXTX_REG22_EO_LATCH_CALOUT_RD(val); + lat_so_itr = RXTX_REG22_SO_LATCH_CALOUT_RD(val); + fail_even = RXTX_REG22_LATCH_CAL_FAIL_EVEN_RD(val); + + serdes_rd(ctx, lane, RXTX_REG23, &val); + lat_de_itr = RXTX_REG23_DE_LATCH_CALOUT_RD(val); + lat_xe_itr = RXTX_REG23_XE_LATCH_CALOUT_RD(val); + + serdes_rd(ctx, lane, RXTX_REG24, &val); + lat_ee_itr = RXTX_REG24_EE_LATCH_CALOUT_RD(val); + lat_se_itr = RXTX_REG24_SE_LATCH_CALOUT_RD(val); + + serdes_rd(ctx, lane, RXTX_REG121, &val); + sum_cal_itr = RXTX_REG121_SUMOS_CAL_CODE_RD(val); + + /* Check for failure. If passed, sum them for averaging */ + if ((fail_even == 0 || fail_even == 1) && + (fail_odd == 0 || fail_odd == 1)) { + lat_do += lat_do_itr; + lat_xo += lat_xo_itr; + lat_eo += lat_eo_itr; + lat_so += lat_so_itr; + lat_de += lat_de_itr; + lat_xe += lat_xe_itr; + lat_ee += lat_ee_itr; + lat_se += lat_se_itr; + sum_cal += sum_cal_itr; + + dev_dbg(ctx->dev, "Iteration %d:\n", avg_loop); + dev_dbg(ctx->dev, "DO 0x%x XO 0x%x EO 0x%x SO 0x%x\n", + lat_do_itr, lat_xo_itr, lat_eo_itr, + lat_so_itr); + dev_dbg(ctx->dev, "DE 0x%x XE 0x%x EE 0x%x SE 0x%x\n", + lat_de_itr, lat_xe_itr, lat_ee_itr, + lat_se_itr); + dev_dbg(ctx->dev, "SUM 0x%x\n", sum_cal_itr); + ++avg_loop; + } else { + dev_err(ctx->dev, + "Receiver calibration failed at %d loop\n", + avg_loop); + } + xgene_phy_reset_rxd(ctx, lane); + } + + /* Update latch manual calibration with average value */ + serdes_rd(ctx, lane, RXTX_REG127, &val); + val = RXTX_REG127_DO_LATCH_MANCAL_SET(val, + xgene_phy_get_avg(lat_do, max_loop)); + val = RXTX_REG127_XO_LATCH_MANCAL_SET(val, + xgene_phy_get_avg(lat_xo, max_loop)); + serdes_wr(ctx, lane, RXTX_REG127, val); + + serdes_rd(ctx, lane, RXTX_REG128, &val); + val = RXTX_REG128_EO_LATCH_MANCAL_SET(val, + xgene_phy_get_avg(lat_eo, max_loop)); + val = RXTX_REG128_SO_LATCH_MANCAL_SET(val, + xgene_phy_get_avg(lat_so, max_loop)); + serdes_wr(ctx, lane, RXTX_REG128, val); + + serdes_rd(ctx, lane, RXTX_REG129, &val); + val = RXTX_REG129_DE_LATCH_MANCAL_SET(val, + xgene_phy_get_avg(lat_de, max_loop)); + val = RXTX_REG129_XE_LATCH_MANCAL_SET(val, + xgene_phy_get_avg(lat_xe, max_loop)); + serdes_wr(ctx, lane, RXTX_REG129, val); + + serdes_rd(ctx, lane, RXTX_REG130, &val); + val = RXTX_REG130_EE_LATCH_MANCAL_SET(val, + xgene_phy_get_avg(lat_ee, max_loop)); + val = RXTX_REG130_SE_LATCH_MANCAL_SET(val, + xgene_phy_get_avg(lat_se, max_loop)); + serdes_wr(ctx, lane, RXTX_REG130, val); + + /* Update SUMMER calibration with average value */ + serdes_rd(ctx, lane, RXTX_REG14, &val); + val = RXTX_REG14_CLTE_LATCAL_MAN_PROG_SET(val, + xgene_phy_get_avg(sum_cal, max_loop)); + serdes_wr(ctx, lane, RXTX_REG14, val); + + dev_dbg(ctx->dev, "Average Value:\n"); + dev_dbg(ctx->dev, "DO 0x%x XO 0x%x EO 0x%x SO 0x%x\n", + xgene_phy_get_avg(lat_do, max_loop), + xgene_phy_get_avg(lat_xo, max_loop), + xgene_phy_get_avg(lat_eo, max_loop), + xgene_phy_get_avg(lat_so, max_loop)); + dev_dbg(ctx->dev, "DE 0x%x XE 0x%x EE 0x%x SE 0x%x\n", + xgene_phy_get_avg(lat_de, max_loop), + xgene_phy_get_avg(lat_xe, max_loop), + xgene_phy_get_avg(lat_ee, max_loop), + xgene_phy_get_avg(lat_se, max_loop)); + dev_dbg(ctx->dev, "SUM 0x%x\n", + xgene_phy_get_avg(sum_cal, max_loop)); + + serdes_rd(ctx, lane, RXTX_REG14, &val); + val = RXTX_REG14_CTLE_LATCAL_MAN_ENA_SET(val, 0x1); + serdes_wr(ctx, lane, RXTX_REG14, val); + dev_dbg(ctx->dev, "Enable Manual Summer calibration\n"); + + serdes_rd(ctx, lane, RXTX_REG127, &val); + val = RXTX_REG127_LATCH_MAN_CAL_ENA_SET(val, 0x1); + dev_dbg(ctx->dev, "Enable Manual Latch calibration\n"); + serdes_wr(ctx, lane, RXTX_REG127, val); + + /* Disable RX Hi-Z termination */ + serdes_rd(ctx, lane, RXTX_REG12, &val); + val = RXTX_REG12_RX_DET_TERM_ENABLE_SET(val, 0); + serdes_wr(ctx, lane, RXTX_REG12, val); + /* Turn on DFE */ + serdes_wr(ctx, lane, RXTX_REG28, 0x0007); + /* Set DFE preset */ + serdes_wr(ctx, lane, RXTX_REG31, 0x7e00); +} + +static int xgene_phy_hw_init(struct phy *phy) +{ + struct xgene_phy_ctx *ctx = phy_get_drvdata(phy); + int rc; + int i; + + rc = xgene_phy_hw_initialize(ctx, CLK_EXT_DIFF, SSC_DISABLE); + if (rc) { + dev_err(ctx->dev, "PHY initialize failed %d\n", rc); + return rc; + } + + /* Setup clock properly after PHY configuration */ + if (!IS_ERR(ctx->clk)) { + /* HW requires an toggle of the clock */ + clk_prepare_enable(ctx->clk); + clk_disable_unprepare(ctx->clk); + clk_prepare_enable(ctx->clk); + } + + /* Compute average value */ + for (i = 0; i < MAX_LANE; i++) + xgene_phy_gen_avg_val(ctx, i); + + dev_dbg(ctx->dev, "PHY initialized\n"); + return 0; +} + +static const struct phy_ops xgene_phy_ops = { + .init = xgene_phy_hw_init, + .owner = THIS_MODULE, +}; + +static struct phy *xgene_phy_xlate(struct device *dev, + struct of_phandle_args *args) +{ + struct xgene_phy_ctx *ctx = dev_get_drvdata(dev); + + if (args->args_count <= 0) + return ERR_PTR(-EINVAL); + if (args->args[0] < MODE_SATA || args->args[0] >= MODE_MAX) + return ERR_PTR(-EINVAL); + + ctx->mode = args->args[0]; + return ctx->phy; +} + +static void xgene_phy_get_param(struct platform_device *pdev, + const char *name, u32 *buffer, + int count, u32 *default_val, + u32 conv_factor) +{ + int i; + + if (!of_property_read_u32_array(pdev->dev.of_node, name, buffer, + count)) { + for (i = 0; i < count; i++) + buffer[i] /= conv_factor; + return; + } + /* Does not exist, load default */ + for (i = 0; i < count; i++) + buffer[i] = default_val[i % 3]; +} + +static int xgene_phy_probe(struct platform_device *pdev) +{ + struct phy_provider *phy_provider; + struct xgene_phy_ctx *ctx; + struct resource *res; + int rc = 0; + u32 default_spd[] = DEFAULT_SATA_SPD_SEL; + u32 default_txboost_gain[] = DEFAULT_SATA_TXBOOST_GAIN; + u32 default_txeye_direction[] = DEFAULT_SATA_TXEYEDIRECTION; + u32 default_txeye_tuning[] = DEFAULT_SATA_TXEYETUNING; + u32 default_txamp[] = DEFAULT_SATA_TXAMP; + u32 default_txcn1[] = DEFAULT_SATA_TXCN1; + u32 default_txcn2[] = DEFAULT_SATA_TXCN2; + u32 default_txcp1[] = DEFAULT_SATA_TXCP1; + int i; + + ctx = devm_kzalloc(&pdev->dev, sizeof(*ctx), GFP_KERNEL); + if (!ctx) + return -ENOMEM; + + ctx->dev = &pdev->dev; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + ctx->sds_base = devm_ioremap_resource(&pdev->dev, res); + if (IS_ERR(ctx->sds_base)) { + rc = PTR_ERR(ctx->sds_base); + goto error; + } + + /* Retrieve optional clock */ + ctx->clk = clk_get(&pdev->dev, NULL); + + /* Load override paramaters */ + xgene_phy_get_param(pdev, "apm,tx-eye-tuning", + ctx->sata_param.txeyetuning, 6, default_txeye_tuning, 1); + xgene_phy_get_param(pdev, "apm,tx-eye-direction", + ctx->sata_param.txeyedirection, 6, default_txeye_direction, 1); + xgene_phy_get_param(pdev, "apm,tx-boost-gain", + ctx->sata_param.txboostgain, 6, default_txboost_gain, 1); + xgene_phy_get_param(pdev, "apm,tx-amplitude", + ctx->sata_param.txamplitude, 6, default_txamp, 13300); + xgene_phy_get_param(pdev, "apm,tx-pre-cursor1", + ctx->sata_param.txprecursor_cn1, 6, default_txcn1, 18200); + xgene_phy_get_param(pdev, "apm,tx-pre-cursor2", + ctx->sata_param.txprecursor_cn2, 6, default_txcn2, 18200); + xgene_phy_get_param(pdev, "apm,tx-post-cursor", + ctx->sata_param.txpostcursor_cp1, 6, default_txcp1, 18200); + xgene_phy_get_param(pdev, "apm,tx-speed", + ctx->sata_param.txspeed, 3, default_spd, 1); + for (i = 0; i < MAX_LANE; i++) + ctx->sata_param.speed[i] = 2; /* Default to Gen3 */ + + ctx->dev = &pdev->dev; + platform_set_drvdata(pdev, ctx); + + ctx->phy = devm_phy_create(ctx->dev, &xgene_phy_ops, NULL); + if (IS_ERR(ctx->phy)) { + dev_dbg(&pdev->dev, "Failed to create PHY\n"); + rc = PTR_ERR(ctx->phy); + goto error; + } + phy_set_drvdata(ctx->phy, ctx); + + phy_provider = devm_of_phy_provider_register(ctx->dev, + xgene_phy_xlate); + if (IS_ERR(phy_provider)) { + rc = PTR_ERR(phy_provider); + goto error; + } + + return 0; + +error: + return rc; +} + +static const struct of_device_id xgene_phy_of_match[] = { + {.compatible = "apm,xgene-phy",}, + {}, +}; +MODULE_DEVICE_TABLE(of, xgene_phy_of_match); + +static struct platform_driver xgene_phy_driver = { + .probe = xgene_phy_probe, + .driver = { + .name = "xgene-phy", + .owner = THIS_MODULE, + .of_match_table = xgene_phy_of_match, + }, +}; +module_platform_driver(xgene_phy_driver); + +MODULE_DESCRIPTION("APM X-Gene Multi-Purpose PHY driver"); +MODULE_AUTHOR("Loc Ho <lho@apm.com>"); +MODULE_LICENSE("GPL v2"); +MODULE_VERSION("0.1"); diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig index 2e6b832..e0cad44 100644 --- a/drivers/usb/Kconfig +++ b/drivers/usb/Kconfig @@ -2,10 +2,6 @@ # USB device configuration # -# These are unused now, remove them once they are no longer selected -config USB_ARCH_HAS_OHCI - bool - config USB_OHCI_BIG_ENDIAN_DESC bool @@ -17,18 +13,12 @@ config USB_OHCI_LITTLE_ENDIAN default n if STB03xxx || PPC_MPC52xx default y -config USB_ARCH_HAS_EHCI - bool - config USB_EHCI_BIG_ENDIAN_MMIO bool config USB_EHCI_BIG_ENDIAN_DESC bool -config USB_ARCH_HAS_XHCI - bool - menuconfig USB_SUPPORT bool "USB support" depends on HAS_IOMEM diff --git a/drivers/usb/chipidea/Makefile b/drivers/usb/chipidea/Makefile index 7345d21..480bd4d 100644 --- a/drivers/usb/chipidea/Makefile +++ b/drivers/usb/chipidea/Makefile @@ -10,6 +10,7 @@ ci_hdrc-$(CONFIG_USB_CHIPIDEA_DEBUG) += debug.o # Glue/Bridge layers go here obj-$(CONFIG_USB_CHIPIDEA) += ci_hdrc_msm.o +obj-$(CONFIG_USB_CHIPIDEA) += ci_hdrc_zevio.o # PCI doesn't provide stubs, need to check ifneq ($(CONFIG_PCI),) diff --git a/drivers/usb/chipidea/bits.h b/drivers/usb/chipidea/bits.h index a857131..83d06c145 100644 --- a/drivers/usb/chipidea/bits.h +++ b/drivers/usb/chipidea/bits.h @@ -50,12 +50,14 @@ #define PORTSC_PTC (0x0FUL << 16) #define PORTSC_PHCD(d) ((d) ? BIT(22) : BIT(23)) /* PTS and PTW for non lpm version only */ +#define PORTSC_PFSC BIT(24) #define PORTSC_PTS(d) \ (u32)((((d) & 0x3) << 30) | (((d) & 0x4) ? BIT(25) : 0)) #define PORTSC_PTW BIT(28) #define PORTSC_STS BIT(29) /* DEVLC */ +#define DEVLC_PFSC BIT(23) #define DEVLC_PSPD (0x03UL << 25) #define DEVLC_PSPD_HS (0x02UL << 25) #define DEVLC_PTW BIT(27) diff --git a/drivers/usb/chipidea/ci.h b/drivers/usb/chipidea/ci.h index 88b80f7..e206406 100644 --- a/drivers/usb/chipidea/ci.h +++ b/drivers/usb/chipidea/ci.h @@ -196,8 +196,6 @@ struct ci_hdrc { struct ci_hdrc_platform_data *platdata; int vbus_active; - /* FIXME: some day, we'll not use global phy */ - bool global_phy; struct usb_phy *transceiver; struct usb_hcd *hcd; struct dentry *debugfs; diff --git a/drivers/usb/chipidea/ci_hdrc_imx.c b/drivers/usb/chipidea/ci_hdrc_imx.c index c00f772..2e58f8d 100644 --- a/drivers/usb/chipidea/ci_hdrc_imx.c +++ b/drivers/usb/chipidea/ci_hdrc_imx.c @@ -96,7 +96,7 @@ static int ci_hdrc_imx_probe(struct platform_device *pdev) { struct ci_hdrc_imx_data *data; struct ci_hdrc_platform_data pdata = { - .name = "ci_hdrc_imx", + .name = dev_name(&pdev->dev), .capoffset = DEF_CAPOFFSET, .flags = CI_HDRC_REQUIRE_TRANSCEIVER | CI_HDRC_DISABLE_STREAMING, diff --git a/drivers/usb/chipidea/ci_hdrc_zevio.c b/drivers/usb/chipidea/ci_hdrc_zevio.c new file mode 100644 index 0000000..3bf6489 --- /dev/null +++ b/drivers/usb/chipidea/ci_hdrc_zevio.c @@ -0,0 +1,72 @@ +/* + * Copyright (C) 2013 Daniel Tang <tangrs@tangrs.id.au> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2, as + * published by the Free Software Foundation. + * + * Based off drivers/usb/chipidea/ci_hdrc_msm.c + * + */ + +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/usb/gadget.h> +#include <linux/usb/chipidea.h> + +#include "ci.h" + +static struct ci_hdrc_platform_data ci_hdrc_zevio_platdata = { + .name = "ci_hdrc_zevio", + .flags = CI_HDRC_REGS_SHARED, + .capoffset = DEF_CAPOFFSET, +}; + +static int ci_hdrc_zevio_probe(struct platform_device *pdev) +{ + struct platform_device *ci_pdev; + + dev_dbg(&pdev->dev, "ci_hdrc_zevio_probe\n"); + + ci_pdev = ci_hdrc_add_device(&pdev->dev, + pdev->resource, pdev->num_resources, + &ci_hdrc_zevio_platdata); + + if (IS_ERR(ci_pdev)) { + dev_err(&pdev->dev, "ci_hdrc_add_device failed!\n"); + return PTR_ERR(ci_pdev); + } + + platform_set_drvdata(pdev, ci_pdev); + + return 0; +} + +static int ci_hdrc_zevio_remove(struct platform_device *pdev) +{ + struct platform_device *ci_pdev = platform_get_drvdata(pdev); + + ci_hdrc_remove_device(ci_pdev); + + return 0; +} + +static const struct of_device_id ci_hdrc_zevio_dt_ids[] = { + { .compatible = "lsi,zevio-usb", }, + { /* sentinel */ } +}; + +static struct platform_driver ci_hdrc_zevio_driver = { + .probe = ci_hdrc_zevio_probe, + .remove = ci_hdrc_zevio_remove, + .driver = { + .name = "zevio_usb", + .owner = THIS_MODULE, + .of_match_table = ci_hdrc_zevio_dt_ids, + }, +}; + +MODULE_DEVICE_TABLE(of, ci_hdrc_zevio_dt_ids); +module_platform_driver(ci_hdrc_zevio_driver); + +MODULE_LICENSE("GPL v2"); diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c index 33f22bc..ca6831c 100644 --- a/drivers/usb/chipidea/core.c +++ b/drivers/usb/chipidea/core.c @@ -64,6 +64,7 @@ #include <linux/usb/otg.h> #include <linux/usb/chipidea.h> #include <linux/usb/of.h> +#include <linux/of.h> #include <linux/phy.h> #include <linux/regulator/consumer.h> @@ -298,6 +299,13 @@ int hw_device_reset(struct ci_hdrc *ci, u32 mode) if (ci->platdata->flags & CI_HDRC_DISABLE_STREAMING) hw_write(ci, OP_USBMODE, USBMODE_CI_SDIS, USBMODE_CI_SDIS); + if (ci->platdata->flags & CI_HDRC_FORCE_FULLSPEED) { + if (ci->hw_bank.lpm) + hw_write(ci, OP_DEVLC, DEVLC_PFSC, DEVLC_PFSC); + else + hw_write(ci, OP_PORTSC, PORTSC_PFSC, PORTSC_PFSC); + } + /* USBMODE should be configured step by step */ hw_write(ci, OP_USBMODE, USBMODE_CM, USBMODE_CM_IDLE); hw_write(ci, OP_USBMODE, USBMODE_CM, mode); @@ -412,6 +420,9 @@ static int ci_get_platdata(struct device *dev, } } + if (of_usb_get_maximum_speed(dev->of_node) == USB_SPEED_FULL) + platdata->flags |= CI_HDRC_FORCE_FULLSPEED; + return 0; } @@ -496,33 +507,6 @@ static void ci_get_otg_capable(struct ci_hdrc *ci) } } -static int ci_usb_phy_init(struct ci_hdrc *ci) -{ - if (ci->platdata->phy) { - ci->transceiver = ci->platdata->phy; - return usb_phy_init(ci->transceiver); - } else { - ci->global_phy = true; - ci->transceiver = usb_get_phy(USB_PHY_TYPE_USB2); - if (IS_ERR(ci->transceiver)) - ci->transceiver = NULL; - - return 0; - } -} - -static void ci_usb_phy_destroy(struct ci_hdrc *ci) -{ - if (!ci->transceiver) - return; - - otg_set_peripheral(ci->transceiver->otg, NULL); - if (ci->global_phy) - usb_put_phy(ci->transceiver); - else - usb_phy_shutdown(ci->transceiver); -} - static int ci_hdrc_probe(struct platform_device *pdev) { struct device *dev = &pdev->dev; @@ -532,7 +516,7 @@ static int ci_hdrc_probe(struct platform_device *pdev) int ret; enum usb_dr_mode dr_mode; - if (!dev->platform_data) { + if (!dev_get_platdata(dev)) { dev_err(dev, "platform data missing\n"); return -ENODEV; } @@ -549,7 +533,7 @@ static int ci_hdrc_probe(struct platform_device *pdev) } ci->dev = dev; - ci->platdata = dev->platform_data; + ci->platdata = dev_get_platdata(dev); ci->imx28_write_fix = !!(ci->platdata->flags & CI_HDRC_IMX28_WRITE_FIX); @@ -561,7 +545,26 @@ static int ci_hdrc_probe(struct platform_device *pdev) hw_phymode_configure(ci); - ret = ci_usb_phy_init(ci); + if (ci->platdata->phy) + ci->transceiver = ci->platdata->phy; + else + ci->transceiver = devm_usb_get_phy(dev, USB_PHY_TYPE_USB2); + + if (IS_ERR(ci->transceiver)) { + ret = PTR_ERR(ci->transceiver); + /* + * if -ENXIO is returned, it means PHY layer wasn't + * enabled, so it makes no sense to return -EPROBE_DEFER + * in that case, since no PHY driver will ever probe. + */ + if (ret == -ENXIO) + return ret; + + dev_err(dev, "no usb2 phy configured\n"); + return -EPROBE_DEFER; + } + + ret = usb_phy_init(ci->transceiver); if (ret) { dev_err(dev, "unable to init phy: %d\n", ret); return ret; @@ -572,8 +575,8 @@ static int ci_hdrc_probe(struct platform_device *pdev) ci->irq = platform_get_irq(pdev, 0); if (ci->irq < 0) { dev_err(dev, "missing IRQ\n"); - ret = -ENODEV; - goto destroy_phy; + ret = ci->irq; + goto deinit_phy; } ci_get_otg_capable(ci); @@ -590,23 +593,12 @@ static int ci_hdrc_probe(struct platform_device *pdev) ret = ci_hdrc_gadget_init(ci); if (ret) dev_info(dev, "doesn't support gadget\n"); - if (!ret && ci->transceiver) { - ret = otg_set_peripheral(ci->transceiver->otg, - &ci->gadget); - /* - * If we implement all USB functions using chipidea drivers, - * it doesn't need to call above API, meanwhile, if we only - * use gadget function, calling above API is useless. - */ - if (ret && ret != -ENOTSUPP) - goto destroy_phy; - } } if (!ci->roles[CI_ROLE_HOST] && !ci->roles[CI_ROLE_GADGET]) { dev_err(dev, "no supported roles\n"); ret = -ENODEV; - goto destroy_phy; + goto deinit_phy; } if (ci->is_otg) { @@ -663,8 +655,8 @@ static int ci_hdrc_probe(struct platform_device *pdev) free_irq(ci->irq, ci); stop: ci_role_destroy(ci); -destroy_phy: - ci_usb_phy_destroy(ci); +deinit_phy: + usb_phy_shutdown(ci->transceiver); return ret; } @@ -677,7 +669,8 @@ static int ci_hdrc_remove(struct platform_device *pdev) free_irq(ci->irq, ci); ci_role_destroy(ci); ci_hdrc_enter_lpm(ci, true); - ci_usb_phy_destroy(ci); + usb_phy_shutdown(ci->transceiver); + kfree(ci->hw_bank.regmap); return 0; } diff --git a/drivers/usb/chipidea/udc.c b/drivers/usb/chipidea/udc.c index 4ab2cb6..7739c64 100644 --- a/drivers/usb/chipidea/udc.c +++ b/drivers/usb/chipidea/udc.c @@ -178,19 +178,6 @@ static int hw_ep_get_halt(struct ci_hdrc *ci, int num, int dir) } /** - * hw_test_and_clear_setup_status: test & clear setup status (execute without - * interruption) - * @n: endpoint number - * - * This function returns setup status - */ -static int hw_test_and_clear_setup_status(struct ci_hdrc *ci, int n) -{ - n = ep_to_bit(ci, n); - return hw_test_and_clear(ci, OP_ENDPTSETUPSTAT, BIT(n)); -} - -/** * hw_ep_prime: primes endpoint (execute without interruption) * @num: endpoint number * @dir: endpoint direction @@ -962,6 +949,156 @@ __acquires(hwep->lock) } /** + * isr_setup_packet_handler: setup packet handler + * @ci: UDC descriptor + * + * This function handles setup packet + */ +static void isr_setup_packet_handler(struct ci_hdrc *ci) +__releases(ci->lock) +__acquires(ci->lock) +{ + struct ci_hw_ep *hwep = &ci->ci_hw_ep[0]; + struct usb_ctrlrequest req; + int type, num, dir, err = -EINVAL; + u8 tmode = 0; + + /* + * Flush data and handshake transactions of previous + * setup packet. + */ + _ep_nuke(ci->ep0out); + _ep_nuke(ci->ep0in); + + /* read_setup_packet */ + do { + hw_test_and_set_setup_guard(ci); + memcpy(&req, &hwep->qh.ptr->setup, sizeof(req)); + } while (!hw_test_and_clear_setup_guard(ci)); + + type = req.bRequestType; + + ci->ep0_dir = (type & USB_DIR_IN) ? TX : RX; + + switch (req.bRequest) { + case USB_REQ_CLEAR_FEATURE: + if (type == (USB_DIR_OUT|USB_RECIP_ENDPOINT) && + le16_to_cpu(req.wValue) == + USB_ENDPOINT_HALT) { + if (req.wLength != 0) + break; + num = le16_to_cpu(req.wIndex); + dir = num & USB_ENDPOINT_DIR_MASK; + num &= USB_ENDPOINT_NUMBER_MASK; + if (dir) /* TX */ + num += ci->hw_ep_max / 2; + if (!ci->ci_hw_ep[num].wedge) { + spin_unlock(&ci->lock); + err = usb_ep_clear_halt( + &ci->ci_hw_ep[num].ep); + spin_lock(&ci->lock); + if (err) + break; + } + err = isr_setup_status_phase(ci); + } else if (type == (USB_DIR_OUT|USB_RECIP_DEVICE) && + le16_to_cpu(req.wValue) == + USB_DEVICE_REMOTE_WAKEUP) { + if (req.wLength != 0) + break; + ci->remote_wakeup = 0; + err = isr_setup_status_phase(ci); + } else { + goto delegate; + } + break; + case USB_REQ_GET_STATUS: + if (type != (USB_DIR_IN|USB_RECIP_DEVICE) && + type != (USB_DIR_IN|USB_RECIP_ENDPOINT) && + type != (USB_DIR_IN|USB_RECIP_INTERFACE)) + goto delegate; + if (le16_to_cpu(req.wLength) != 2 || + le16_to_cpu(req.wValue) != 0) + break; + err = isr_get_status_response(ci, &req); + break; + case USB_REQ_SET_ADDRESS: + if (type != (USB_DIR_OUT|USB_RECIP_DEVICE)) + goto delegate; + if (le16_to_cpu(req.wLength) != 0 || + le16_to_cpu(req.wIndex) != 0) + break; + ci->address = (u8)le16_to_cpu(req.wValue); + ci->setaddr = true; + err = isr_setup_status_phase(ci); + break; + case USB_REQ_SET_FEATURE: + if (type == (USB_DIR_OUT|USB_RECIP_ENDPOINT) && + le16_to_cpu(req.wValue) == + USB_ENDPOINT_HALT) { + if (req.wLength != 0) + break; + num = le16_to_cpu(req.wIndex); + dir = num & USB_ENDPOINT_DIR_MASK; + num &= USB_ENDPOINT_NUMBER_MASK; + if (dir) /* TX */ + num += ci->hw_ep_max / 2; + + spin_unlock(&ci->lock); + err = usb_ep_set_halt(&ci->ci_hw_ep[num].ep); + spin_lock(&ci->lock); + if (!err) + isr_setup_status_phase(ci); + } else if (type == (USB_DIR_OUT|USB_RECIP_DEVICE)) { + if (req.wLength != 0) + break; + switch (le16_to_cpu(req.wValue)) { + case USB_DEVICE_REMOTE_WAKEUP: + ci->remote_wakeup = 1; + err = isr_setup_status_phase(ci); + break; + case USB_DEVICE_TEST_MODE: + tmode = le16_to_cpu(req.wIndex) >> 8; + switch (tmode) { + case TEST_J: + case TEST_K: + case TEST_SE0_NAK: + case TEST_PACKET: + case TEST_FORCE_EN: + ci->test_mode = tmode; + err = isr_setup_status_phase( + ci); + break; + default: + break; + } + default: + goto delegate; + } + } else { + goto delegate; + } + break; + default: +delegate: + if (req.wLength == 0) /* no data phase */ + ci->ep0_dir = TX; + + spin_unlock(&ci->lock); + err = ci->driver->setup(&ci->gadget, &req); + spin_lock(&ci->lock); + break; + } + + if (err < 0) { + spin_unlock(&ci->lock); + if (usb_ep_set_halt(&hwep->ep)) + dev_err(ci->dev, "error: ep_set_halt\n"); + spin_lock(&ci->lock); + } +} + +/** * isr_tr_complete_handler: transaction complete interrupt handler * @ci: UDC descriptor * @@ -972,12 +1109,10 @@ __releases(ci->lock) __acquires(ci->lock) { unsigned i; - u8 tmode = 0; + int err; for (i = 0; i < ci->hw_ep_max; i++) { struct ci_hw_ep *hwep = &ci->ci_hw_ep[i]; - int type, num, dir, err = -EINVAL; - struct usb_ctrlrequest req; if (hwep->ep.desc == NULL) continue; /* not configured */ @@ -997,148 +1132,10 @@ __acquires(ci->lock) } } - if (hwep->type != USB_ENDPOINT_XFER_CONTROL || - !hw_test_and_clear_setup_status(ci, i)) - continue; - - if (i != 0) { - dev_warn(ci->dev, "ctrl traffic at endpoint %d\n", i); - continue; - } - - /* - * Flush data and handshake transactions of previous - * setup packet. - */ - _ep_nuke(ci->ep0out); - _ep_nuke(ci->ep0in); - - /* read_setup_packet */ - do { - hw_test_and_set_setup_guard(ci); - memcpy(&req, &hwep->qh.ptr->setup, sizeof(req)); - } while (!hw_test_and_clear_setup_guard(ci)); - - type = req.bRequestType; - - ci->ep0_dir = (type & USB_DIR_IN) ? TX : RX; - - switch (req.bRequest) { - case USB_REQ_CLEAR_FEATURE: - if (type == (USB_DIR_OUT|USB_RECIP_ENDPOINT) && - le16_to_cpu(req.wValue) == - USB_ENDPOINT_HALT) { - if (req.wLength != 0) - break; - num = le16_to_cpu(req.wIndex); - dir = num & USB_ENDPOINT_DIR_MASK; - num &= USB_ENDPOINT_NUMBER_MASK; - if (dir) /* TX */ - num += ci->hw_ep_max/2; - if (!ci->ci_hw_ep[num].wedge) { - spin_unlock(&ci->lock); - err = usb_ep_clear_halt( - &ci->ci_hw_ep[num].ep); - spin_lock(&ci->lock); - if (err) - break; - } - err = isr_setup_status_phase(ci); - } else if (type == (USB_DIR_OUT|USB_RECIP_DEVICE) && - le16_to_cpu(req.wValue) == - USB_DEVICE_REMOTE_WAKEUP) { - if (req.wLength != 0) - break; - ci->remote_wakeup = 0; - err = isr_setup_status_phase(ci); - } else { - goto delegate; - } - break; - case USB_REQ_GET_STATUS: - if (type != (USB_DIR_IN|USB_RECIP_DEVICE) && - type != (USB_DIR_IN|USB_RECIP_ENDPOINT) && - type != (USB_DIR_IN|USB_RECIP_INTERFACE)) - goto delegate; - if (le16_to_cpu(req.wLength) != 2 || - le16_to_cpu(req.wValue) != 0) - break; - err = isr_get_status_response(ci, &req); - break; - case USB_REQ_SET_ADDRESS: - if (type != (USB_DIR_OUT|USB_RECIP_DEVICE)) - goto delegate; - if (le16_to_cpu(req.wLength) != 0 || - le16_to_cpu(req.wIndex) != 0) - break; - ci->address = (u8)le16_to_cpu(req.wValue); - ci->setaddr = true; - err = isr_setup_status_phase(ci); - break; - case USB_REQ_SET_FEATURE: - if (type == (USB_DIR_OUT|USB_RECIP_ENDPOINT) && - le16_to_cpu(req.wValue) == - USB_ENDPOINT_HALT) { - if (req.wLength != 0) - break; - num = le16_to_cpu(req.wIndex); - dir = num & USB_ENDPOINT_DIR_MASK; - num &= USB_ENDPOINT_NUMBER_MASK; - if (dir) /* TX */ - num += ci->hw_ep_max/2; - - spin_unlock(&ci->lock); - err = usb_ep_set_halt(&ci->ci_hw_ep[num].ep); - spin_lock(&ci->lock); - if (!err) - isr_setup_status_phase(ci); - } else if (type == (USB_DIR_OUT|USB_RECIP_DEVICE)) { - if (req.wLength != 0) - break; - switch (le16_to_cpu(req.wValue)) { - case USB_DEVICE_REMOTE_WAKEUP: - ci->remote_wakeup = 1; - err = isr_setup_status_phase(ci); - break; - case USB_DEVICE_TEST_MODE: - tmode = le16_to_cpu(req.wIndex) >> 8; - switch (tmode) { - case TEST_J: - case TEST_K: - case TEST_SE0_NAK: - case TEST_PACKET: - case TEST_FORCE_EN: - ci->test_mode = tmode; - err = isr_setup_status_phase( - ci); - break; - default: - break; - } - default: - goto delegate; - } - } else { - goto delegate; - } - break; - default: -delegate: - if (req.wLength == 0) /* no data phase */ - ci->ep0_dir = TX; - - spin_unlock(&ci->lock); - err = ci->driver->setup(&ci->gadget, &req); - spin_lock(&ci->lock); - break; - } - - if (err < 0) { - spin_unlock(&ci->lock); - if (usb_ep_set_halt(&hwep->ep)) - dev_err(ci->dev, "error: ep_set_halt\n"); - spin_lock(&ci->lock); - } + /* Only handle setup packet below */ + if (i == 0 && + hw_test_and_clear(ci, OP_ENDPTSETUPSTAT, BIT(0))) + isr_setup_packet_handler(ci); } } @@ -1193,6 +1190,11 @@ static int ep_enable(struct usb_ep *ep, hwep->qh.ptr->td.next |= cpu_to_le32(TD_TERMINATE); /* needed? */ + if (hwep->num != 0 && hwep->type == USB_ENDPOINT_XFER_CONTROL) { + dev_err(hwep->ci->dev, "Set control xfer at non-ep0\n"); + retval = -EINVAL; + } + /* * Enable endpoints in the HW other than ep0 as ep0 * is always enabled @@ -1837,12 +1839,6 @@ void ci_hdrc_gadget_destroy(struct ci_hdrc *ci) dma_pool_destroy(ci->td_pool); dma_pool_destroy(ci->qh_pool); - - if (ci->transceiver) { - otg_set_peripheral(ci->transceiver->otg, NULL); - if (ci->global_phy) - usb_put_phy(ci->transceiver); - } } static int udc_id_switch_for_device(struct ci_hdrc *ci) diff --git a/drivers/usb/core/config.c b/drivers/usb/core/config.c index 062967c..1ab4df1 100644 --- a/drivers/usb/core/config.c +++ b/drivers/usb/core/config.c @@ -10,7 +10,6 @@ #define USB_MAXALTSETTING 128 /* Hard limit */ -#define USB_MAXENDPOINTS 30 /* Hard limit */ #define USB_MAXCONFIG 8 /* Arbitrary limit */ diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index 2a8afe6..257876e 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -769,6 +769,88 @@ static int check_ctrlrecip(struct usb_dev_state *ps, unsigned int requesttype, return ret; } +static struct usb_host_endpoint *ep_to_host_endpoint(struct usb_device *dev, + unsigned char ep) +{ + if (ep & USB_ENDPOINT_DIR_MASK) + return dev->ep_in[ep & USB_ENDPOINT_NUMBER_MASK]; + else + return dev->ep_out[ep & USB_ENDPOINT_NUMBER_MASK]; +} + +static int parse_usbdevfs_streams(struct usb_dev_state *ps, + struct usbdevfs_streams __user *streams, + unsigned int *num_streams_ret, + unsigned int *num_eps_ret, + struct usb_host_endpoint ***eps_ret, + struct usb_interface **intf_ret) +{ + unsigned int i, num_streams, num_eps; + struct usb_host_endpoint **eps; + struct usb_interface *intf = NULL; + unsigned char ep; + int ifnum, ret; + + if (get_user(num_streams, &streams->num_streams) || + get_user(num_eps, &streams->num_eps)) + return -EFAULT; + + if (num_eps < 1 || num_eps > USB_MAXENDPOINTS) + return -EINVAL; + + /* The XHCI controller allows max 2 ^ 16 streams */ + if (num_streams_ret && (num_streams < 2 || num_streams > 65536)) + return -EINVAL; + + eps = kmalloc(num_eps * sizeof(*eps), GFP_KERNEL); + if (!eps) + return -ENOMEM; + + for (i = 0; i < num_eps; i++) { + if (get_user(ep, &streams->eps[i])) { + ret = -EFAULT; + goto error; + } + eps[i] = ep_to_host_endpoint(ps->dev, ep); + if (!eps[i]) { + ret = -EINVAL; + goto error; + } + + /* usb_alloc/free_streams operate on an usb_interface */ + ifnum = findintfep(ps->dev, ep); + if (ifnum < 0) { + ret = ifnum; + goto error; + } + + if (i == 0) { + ret = checkintf(ps, ifnum); + if (ret < 0) + goto error; + intf = usb_ifnum_to_if(ps->dev, ifnum); + } else { + /* Verify all eps belong to the same interface */ + if (ifnum != intf->altsetting->desc.bInterfaceNumber) { + ret = -EINVAL; + goto error; + } + } + } + + if (num_streams_ret) + *num_streams_ret = num_streams; + *num_eps_ret = num_eps; + *eps_ret = eps; + *intf_ret = intf; + + return 0; + +error: + kfree(eps); + return ret; +} + static int match_devt(struct device *dev, void *data) { return dev->devt == (dev_t) (unsigned long) data; @@ -1043,6 +1125,20 @@ static int proc_bulk(struct usb_dev_state *ps, void __user *arg) return ret; } +static void check_reset_of_active_ep(struct usb_device *udev, + unsigned int epnum, char *ioctl_name) +{ + struct usb_host_endpoint **eps; + struct usb_host_endpoint *ep; + + eps = (epnum & USB_DIR_IN) ? udev->ep_in : udev->ep_out; + ep = eps[epnum & 0x0f]; + if (ep && !list_empty(&ep->urb_list)) + dev_warn(&udev->dev, "Process %d (%s) called USBDEVFS_%s for active endpoint 0x%02x\n", + task_pid_nr(current), current->comm, + ioctl_name, epnum); +} + static int proc_resetep(struct usb_dev_state *ps, void __user *arg) { unsigned int ep; @@ -1056,6 +1152,7 @@ static int proc_resetep(struct usb_dev_state *ps, void __user *arg) ret = checkintf(ps, ret); if (ret) return ret; + check_reset_of_active_ep(ps->dev, ep, "RESETEP"); usb_reset_endpoint(ps->dev, ep); return 0; } @@ -1074,6 +1171,7 @@ static int proc_clearhalt(struct usb_dev_state *ps, void __user *arg) ret = checkintf(ps, ret); if (ret) return ret; + check_reset_of_active_ep(ps->dev, ep, "CLEAR_HALT"); if (ep & USB_DIR_IN) pipe = usb_rcvbulkpipe(ps->dev, ep & 0x7f); else @@ -1127,6 +1225,9 @@ static int proc_setintf(struct usb_dev_state *ps, void __user *arg) return -EFAULT; if ((ret = checkintf(ps, setintf.interface))) return ret; + + destroy_async_on_interface(ps, setintf.interface); + return usb_set_interface(ps->dev, setintf.interface, setintf.altsetting); } @@ -1189,6 +1290,8 @@ static int proc_do_submiturb(struct usb_dev_state *ps, struct usbdevfs_urb *uurb struct usb_ctrlrequest *dr = NULL; unsigned int u, totlen, isofrmlen; int i, ret, is_in, num_sgs = 0, ifnum = -1; + int number_of_packets = 0; + unsigned int stream_id = 0; void *buf; if (uurb->flags & ~(USBDEVFS_URB_ISO_ASAP | @@ -1209,15 +1312,10 @@ static int proc_do_submiturb(struct usb_dev_state *ps, struct usbdevfs_urb *uurb if (ret) return ret; } - if ((uurb->endpoint & USB_ENDPOINT_DIR_MASK) != 0) { - is_in = 1; - ep = ps->dev->ep_in[uurb->endpoint & USB_ENDPOINT_NUMBER_MASK]; - } else { - is_in = 0; - ep = ps->dev->ep_out[uurb->endpoint & USB_ENDPOINT_NUMBER_MASK]; - } + ep = ep_to_host_endpoint(ps->dev, uurb->endpoint); if (!ep) return -ENOENT; + is_in = (uurb->endpoint & USB_ENDPOINT_DIR_MASK) != 0; u = 0; switch(uurb->type) { @@ -1242,7 +1340,6 @@ static int proc_do_submiturb(struct usb_dev_state *ps, struct usbdevfs_urb *uurb le16_to_cpup(&dr->wIndex)); if (ret) goto error; - uurb->number_of_packets = 0; uurb->buffer_length = le16_to_cpup(&dr->wLength); uurb->buffer += 8; if ((dr->bRequestType & USB_DIR_IN) && uurb->buffer_length) { @@ -1272,17 +1369,17 @@ static int proc_do_submiturb(struct usb_dev_state *ps, struct usbdevfs_urb *uurb uurb->type = USBDEVFS_URB_TYPE_INTERRUPT; goto interrupt_urb; } - uurb->number_of_packets = 0; num_sgs = DIV_ROUND_UP(uurb->buffer_length, USB_SG_SIZE); if (num_sgs == 1 || num_sgs > ps->dev->bus->sg_tablesize) num_sgs = 0; + if (ep->streams) + stream_id = uurb->stream_id; break; case USBDEVFS_URB_TYPE_INTERRUPT: if (!usb_endpoint_xfer_int(&ep->desc)) return -EINVAL; interrupt_urb: - uurb->number_of_packets = 0; break; case USBDEVFS_URB_TYPE_ISO: @@ -1292,15 +1389,16 @@ static int proc_do_submiturb(struct usb_dev_state *ps, struct usbdevfs_urb *uurb return -EINVAL; if (!usb_endpoint_xfer_isoc(&ep->desc)) return -EINVAL; + number_of_packets = uurb->number_of_packets; isofrmlen = sizeof(struct usbdevfs_iso_packet_desc) * - uurb->number_of_packets; + number_of_packets; if (!(isopkt = kmalloc(isofrmlen, GFP_KERNEL))) return -ENOMEM; if (copy_from_user(isopkt, iso_frame_desc, isofrmlen)) { ret = -EFAULT; goto error; } - for (totlen = u = 0; u < uurb->number_of_packets; u++) { + for (totlen = u = 0; u < number_of_packets; u++) { /* * arbitrary limit need for USB 3.0 * bMaxBurst (0~15 allowed, 1~16 packets) @@ -1331,7 +1429,7 @@ static int proc_do_submiturb(struct usb_dev_state *ps, struct usbdevfs_urb *uurb ret = -EFAULT; goto error; } - as = alloc_async(uurb->number_of_packets); + as = alloc_async(number_of_packets); if (!as) { ret = -ENOMEM; goto error; @@ -1425,7 +1523,8 @@ static int proc_do_submiturb(struct usb_dev_state *ps, struct usbdevfs_urb *uurb as->urb->setup_packet = (unsigned char *)dr; dr = NULL; as->urb->start_frame = uurb->start_frame; - as->urb->number_of_packets = uurb->number_of_packets; + as->urb->number_of_packets = number_of_packets; + as->urb->stream_id = stream_id; if (uurb->type == USBDEVFS_URB_TYPE_ISO || ps->dev->speed == USB_SPEED_HIGH) as->urb->interval = 1 << min(15, ep->desc.bInterval - 1); @@ -1433,7 +1532,7 @@ static int proc_do_submiturb(struct usb_dev_state *ps, struct usbdevfs_urb *uurb as->urb->interval = ep->desc.bInterval; as->urb->context = as; as->urb->complete = async_completed; - for (totlen = u = 0; u < uurb->number_of_packets; u++) { + for (totlen = u = 0; u < number_of_packets; u++) { as->urb->iso_frame_desc[u].offset = totlen; as->urb->iso_frame_desc[u].length = isopkt[u].length; totlen += isopkt[u].length; @@ -1983,6 +2082,45 @@ static int proc_disconnect_claim(struct usb_dev_state *ps, void __user *arg) return claimintf(ps, dc.interface); } +static int proc_alloc_streams(struct usb_dev_state *ps, void __user *arg) +{ + unsigned num_streams, num_eps; + struct usb_host_endpoint **eps; + struct usb_interface *intf; + int r; + + r = parse_usbdevfs_streams(ps, arg, &num_streams, &num_eps, + &eps, &intf); + if (r) + return r; + + destroy_async_on_interface(ps, + intf->altsetting[0].desc.bInterfaceNumber); + + r = usb_alloc_streams(intf, eps, num_eps, num_streams, GFP_KERNEL); + kfree(eps); + return r; +} + +static int proc_free_streams(struct usb_dev_state *ps, void __user *arg) +{ + unsigned num_eps; + struct usb_host_endpoint **eps; + struct usb_interface *intf; + int r; + + r = parse_usbdevfs_streams(ps, arg, NULL, &num_eps, &eps, &intf); + if (r) + return r; + + destroy_async_on_interface(ps, + intf->altsetting[0].desc.bInterfaceNumber); + + r = usb_free_streams(intf, eps, num_eps, GFP_KERNEL); + kfree(eps); + return r; +} + /* * NOTE: All requests here that have interface numbers as parameters * are assuming that somehow the configuration has been prevented from @@ -2159,6 +2297,12 @@ static long usbdev_do_ioctl(struct file *file, unsigned int cmd, case USBDEVFS_DISCONNECT_CLAIM: ret = proc_disconnect_claim(ps, p); break; + case USBDEVFS_ALLOC_STREAMS: + ret = proc_alloc_streams(ps, p); + break; + case USBDEVFS_FREE_STREAMS: + ret = proc_free_streams(ps, p); + break; } usb_unlock_device(dev); if (ret >= 0) diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index ab90a01..888881e 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -312,9 +312,9 @@ static int usb_probe_interface(struct device *dev) return error; } - id = usb_match_id(intf, driver->id_table); + id = usb_match_dynamic_id(intf, driver); if (!id) - id = usb_match_dynamic_id(intf, driver); + id = usb_match_id(intf, driver->id_table); if (!id) return error; @@ -400,8 +400,9 @@ static int usb_unbind_interface(struct device *dev) { struct usb_driver *driver = to_usb_driver(dev->driver); struct usb_interface *intf = to_usb_interface(dev); + struct usb_host_endpoint *ep, **eps = NULL; struct usb_device *udev; - int error, r, lpm_disable_error; + int i, j, error, r, lpm_disable_error; intf->condition = USB_INTERFACE_UNBINDING; @@ -425,6 +426,26 @@ static int usb_unbind_interface(struct device *dev) driver->disconnect(intf); usb_cancel_queued_reset(intf); + /* Free streams */ + for (i = 0, j = 0; i < intf->cur_altsetting->desc.bNumEndpoints; i++) { + ep = &intf->cur_altsetting->endpoint[i]; + if (ep->streams == 0) + continue; + if (j == 0) { + eps = kmalloc(USB_MAXENDPOINTS * sizeof(void *), + GFP_KERNEL); + if (!eps) { + dev_warn(dev, "oom, leaking streams\n"); + break; + } + } + eps[j++] = ep; + } + if (j) { + usb_free_streams(intf, eps, j, GFP_KERNEL); + kfree(eps); + } + /* Reset other interface state. * We cannot do a Set-Interface if the device is suspended or * if it is prepared for a system sleep (since installing a new @@ -990,8 +1011,7 @@ EXPORT_SYMBOL_GPL(usb_deregister); * it doesn't support pre_reset/post_reset/reset_resume or * because it doesn't support suspend/resume. * - * The caller must hold @intf's device's lock, but not its pm_mutex - * and not @intf->dev.sem. + * The caller must hold @intf's device's lock, but not @intf's lock. */ void usb_forced_unbind_intf(struct usb_interface *intf) { @@ -1004,16 +1024,37 @@ void usb_forced_unbind_intf(struct usb_interface *intf) intf->needs_binding = 1; } +/* + * Unbind drivers for @udev's marked interfaces. These interfaces have + * the needs_binding flag set, for example by usb_resume_interface(). + * + * The caller must hold @udev's device lock. + */ +static void unbind_marked_interfaces(struct usb_device *udev) +{ + struct usb_host_config *config; + int i; + struct usb_interface *intf; + + config = udev->actconfig; + if (config) { + for (i = 0; i < config->desc.bNumInterfaces; ++i) { + intf = config->interface[i]; + if (intf->dev.driver && intf->needs_binding) + usb_forced_unbind_intf(intf); + } + } +} + /* Delayed forced unbinding of a USB interface driver and scan * for rebinding. * - * The caller must hold @intf's device's lock, but not its pm_mutex - * and not @intf->dev.sem. + * The caller must hold @intf's device's lock, but not @intf's lock. * * Note: Rebinds will be skipped if a system sleep transition is in * progress and the PM "complete" callback hasn't occurred yet. */ -void usb_rebind_intf(struct usb_interface *intf) +static void usb_rebind_intf(struct usb_interface *intf) { int rc; @@ -1030,68 +1071,66 @@ void usb_rebind_intf(struct usb_interface *intf) } } -#ifdef CONFIG_PM - -/* Unbind drivers for @udev's interfaces that don't support suspend/resume - * There is no check for reset_resume here because it can be determined - * only during resume whether reset_resume is needed. +/* + * Rebind drivers to @udev's marked interfaces. These interfaces have + * the needs_binding flag set. * * The caller must hold @udev's device lock. */ -static void unbind_no_pm_drivers_interfaces(struct usb_device *udev) +static void rebind_marked_interfaces(struct usb_device *udev) { struct usb_host_config *config; int i; struct usb_interface *intf; - struct usb_driver *drv; config = udev->actconfig; if (config) { for (i = 0; i < config->desc.bNumInterfaces; ++i) { intf = config->interface[i]; - - if (intf->dev.driver) { - drv = to_usb_driver(intf->dev.driver); - if (!drv->suspend || !drv->resume) - usb_forced_unbind_intf(intf); - } + if (intf->needs_binding) + usb_rebind_intf(intf); } } } -/* Unbind drivers for @udev's interfaces that failed to support reset-resume. - * These interfaces have the needs_binding flag set by usb_resume_interface(). +/* + * Unbind all of @udev's marked interfaces and then rebind all of them. + * This ordering is necessary because some drivers claim several interfaces + * when they are first probed. * * The caller must hold @udev's device lock. */ -static void unbind_no_reset_resume_drivers_interfaces(struct usb_device *udev) +void usb_unbind_and_rebind_marked_interfaces(struct usb_device *udev) { - struct usb_host_config *config; - int i; - struct usb_interface *intf; - - config = udev->actconfig; - if (config) { - for (i = 0; i < config->desc.bNumInterfaces; ++i) { - intf = config->interface[i]; - if (intf->dev.driver && intf->needs_binding) - usb_forced_unbind_intf(intf); - } - } + unbind_marked_interfaces(udev); + rebind_marked_interfaces(udev); } -static void do_rebind_interfaces(struct usb_device *udev) +#ifdef CONFIG_PM + +/* Unbind drivers for @udev's interfaces that don't support suspend/resume + * There is no check for reset_resume here because it can be determined + * only during resume whether reset_resume is needed. + * + * The caller must hold @udev's device lock. + */ +static void unbind_no_pm_drivers_interfaces(struct usb_device *udev) { struct usb_host_config *config; int i; struct usb_interface *intf; + struct usb_driver *drv; config = udev->actconfig; if (config) { for (i = 0; i < config->desc.bNumInterfaces; ++i) { intf = config->interface[i]; - if (intf->needs_binding) - usb_rebind_intf(intf); + + if (intf->dev.driver) { + drv = to_usb_driver(intf->dev.driver); + if (!drv->suspend || !drv->resume) + usb_forced_unbind_intf(intf); + } } } } @@ -1420,7 +1459,7 @@ int usb_resume_complete(struct device *dev) * whose needs_binding flag is set */ if (udev->state != USB_STATE_NOTATTACHED) - do_rebind_interfaces(udev); + rebind_marked_interfaces(udev); return 0; } @@ -1442,7 +1481,7 @@ int usb_resume(struct device *dev, pm_message_t msg) pm_runtime_disable(dev); pm_runtime_set_active(dev); pm_runtime_enable(dev); - unbind_no_reset_resume_drivers_interfaces(udev); + unbind_marked_interfaces(udev); } /* Avoid PM error messages for devices disconnected while suspended diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c index 2518c32..9c4e292 100644 --- a/drivers/usb/core/hcd.c +++ b/drivers/usb/core/hcd.c @@ -2049,7 +2049,7 @@ int usb_alloc_streams(struct usb_interface *interface, { struct usb_hcd *hcd; struct usb_device *dev; - int i; + int i, ret; dev = interface_to_usbdev(interface); hcd = bus_to_hcd(dev->bus); @@ -2058,13 +2058,24 @@ int usb_alloc_streams(struct usb_interface *interface, if (dev->speed != USB_SPEED_SUPER) return -EINVAL; - /* Streams only apply to bulk endpoints. */ - for (i = 0; i < num_eps; i++) + for (i = 0; i < num_eps; i++) { + /* Streams only apply to bulk endpoints. */ if (!usb_endpoint_xfer_bulk(&eps[i]->desc)) return -EINVAL; + /* Re-alloc is not allowed */ + if (eps[i]->streams) + return -EINVAL; + } - return hcd->driver->alloc_streams(hcd, dev, eps, num_eps, + ret = hcd->driver->alloc_streams(hcd, dev, eps, num_eps, num_streams, mem_flags); + if (ret < 0) + return ret; + + for (i = 0; i < num_eps; i++) + eps[i]->streams = ret; + + return ret; } EXPORT_SYMBOL_GPL(usb_alloc_streams); @@ -2078,8 +2089,7 @@ EXPORT_SYMBOL_GPL(usb_alloc_streams); * Reverts a group of bulk endpoints back to not using stream IDs. * Can fail if we are given bad arguments, or HCD is broken. * - * Return: On success, the number of allocated streams. On failure, a negative - * error code. + * Return: 0 on success. On failure, a negative error code. */ int usb_free_streams(struct usb_interface *interface, struct usb_host_endpoint **eps, unsigned int num_eps, @@ -2087,19 +2097,26 @@ int usb_free_streams(struct usb_interface *interface, { struct usb_hcd *hcd; struct usb_device *dev; - int i; + int i, ret; dev = interface_to_usbdev(interface); hcd = bus_to_hcd(dev->bus); if (dev->speed != USB_SPEED_SUPER) return -EINVAL; - /* Streams only apply to bulk endpoints. */ + /* Double-free is not allowed */ for (i = 0; i < num_eps; i++) - if (!eps[i] || !usb_endpoint_xfer_bulk(&eps[i]->desc)) + if (!eps[i] || !eps[i]->streams) return -EINVAL; - return hcd->driver->free_streams(hcd, dev, eps, num_eps, mem_flags); + ret = hcd->driver->free_streams(hcd, dev, eps, num_eps, mem_flags); + if (ret < 0) + return ret; + + for (i = 0; i < num_eps; i++) + eps[i]->streams = 0; + + return ret; } EXPORT_SYMBOL_GPL(usb_free_streams); diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 6107358..090469e 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -141,19 +141,27 @@ static int usb_device_supports_lpm(struct usb_device *udev) return 0; } - /* All USB 3.0 must support LPM, but we need their max exit latency - * information from the SuperSpeed Extended Capabilities BOS descriptor. + /* + * According to the USB 3.0 spec, all USB 3.0 devices must support LPM. + * However, there are some that don't, and they set the U1/U2 exit + * latencies to zero. */ if (!udev->bos->ss_cap) { - dev_warn(&udev->dev, "No LPM exit latency info found. " - "Power management will be impacted.\n"); + dev_info(&udev->dev, "No LPM exit latency info found, disabling LPM.\n"); + return 0; + } + + if (udev->bos->ss_cap->bU1devExitLat == 0 && + udev->bos->ss_cap->bU2DevExitLat == 0) { + if (udev->parent) + dev_info(&udev->dev, "LPM exit latency is zeroed, disabling LPM.\n"); + else + dev_info(&udev->dev, "We don't know the algorithms for LPM for this host, disabling LPM.\n"); return 0; } - if (udev->parent->lpm_capable) - return 1; - dev_warn(&udev->dev, "Parent hub missing LPM exit latency info. " - "Power management will be impacted.\n"); + if (!udev->parent || udev->parent->lpm_capable) + return 1; return 0; } @@ -499,7 +507,8 @@ static void led_work (struct work_struct *work) changed++; } if (changed) - schedule_delayed_work(&hub->leds, LED_CYCLE_PERIOD); + queue_delayed_work(system_power_efficient_wq, + &hub->leds, LED_CYCLE_PERIOD); } /* use a short timeout for hub/port status fetches */ @@ -1041,7 +1050,8 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) if (type == HUB_INIT) { delay = hub_power_on(hub, false); INIT_DELAYED_WORK(&hub->init_work, hub_init_func2); - schedule_delayed_work(&hub->init_work, + queue_delayed_work(system_power_efficient_wq, + &hub->init_work, msecs_to_jiffies(delay)); /* Suppress autosuspend until init is done */ @@ -1195,7 +1205,8 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) /* Don't do a long sleep inside a workqueue routine */ if (type == HUB_INIT2) { INIT_DELAYED_WORK(&hub->init_work, hub_init_func3); - schedule_delayed_work(&hub->init_work, + queue_delayed_work(system_power_efficient_wq, + &hub->init_work, msecs_to_jiffies(delay)); return; /* Continues at init3: below */ } else { @@ -1209,7 +1220,8 @@ static void hub_activate(struct usb_hub *hub, enum hub_activation_type type) if (status < 0) dev_err(hub->intfdev, "activate --> %d\n", status); if (hub->has_indicators && blinkenlights) - schedule_delayed_work(&hub->leds, LED_CYCLE_PERIOD); + queue_delayed_work(system_power_efficient_wq, + &hub->leds, LED_CYCLE_PERIOD); /* Scan all ports that need attention */ kick_khubd(hub); @@ -3095,9 +3107,19 @@ static int finish_port_resume(struct usb_device *udev) * operation is carried out here, after the port has been * resumed. */ - if (udev->reset_resume) + if (udev->reset_resume) { + /* + * If the device morphs or switches modes when it is reset, + * we don't want to perform a reset-resume. We'll fail the + * resume, which will cause a logical disconnect, and then + * the device will be rediscovered. + */ retry_reset_resume: - status = usb_reset_and_verify_device(udev); + if (udev->quirks & USB_QUIRK_RESET) + status = -ENODEV; + else + status = usb_reset_and_verify_device(udev); + } /* 10.5.4.5 says be sure devices in the tree are still there. * For now let's assume the device didn't go crazy on resume, @@ -3960,7 +3982,7 @@ static void hub_set_initial_usb2_lpm_policy(struct usb_device *udev) connect_type = usb_get_hub_port_connect_type(udev->parent, udev->portnum); - if ((udev->bos->ext_cap->bmAttributes & USB_BESL_SUPPORT) || + if ((udev->bos->ext_cap->bmAttributes & cpu_to_le32(USB_BESL_SUPPORT)) || connect_type == USB_PORT_CONNECT_TYPE_HARD_WIRED) { udev->usb2_hw_lpm_allowed = 1; usb_set_usb2_hardware_lpm(udev, 1); @@ -4109,8 +4131,12 @@ hub_port_init (struct usb_hub *hub, struct usb_device *udev, int port1, did_new_scheme = true; retval = hub_enable_device(udev); - if (retval < 0) + if (retval < 0) { + dev_err(&udev->dev, + "hub failed to enable device, error %d\n", + retval); goto fail; + } #define GET_DESCRIPTOR_BUFSIZE 64 buf = kmalloc(GET_DESCRIPTOR_BUFSIZE, GFP_NOIO); @@ -4313,7 +4339,8 @@ check_highspeed (struct usb_hub *hub, struct usb_device *udev, int port1) /* hub LEDs are probably harder to miss than syslog */ if (hub->has_indicators) { hub->indicator[port1-1] = INDICATOR_GREEN_BLINK; - schedule_delayed_work (&hub->leds, 0); + queue_delayed_work(system_power_efficient_wq, + &hub->leds, 0); } } kfree(qual); @@ -4542,7 +4569,9 @@ static void hub_port_connect_change(struct usb_hub *hub, int port1, if (hub->has_indicators) { hub->indicator[port1-1] = INDICATOR_AMBER_BLINK; - schedule_delayed_work (&hub->leds, 0); + queue_delayed_work( + system_power_efficient_wq, + &hub->leds, 0); } status = -ENOTCONN; /* Don't retry */ goto loop_disable; @@ -4741,6 +4770,8 @@ static void hub_events(void) /* deal with port status changes */ for (i = 1; i <= hdev->maxchild; i++) { + struct usb_device *udev = hub->ports[i - 1]->child; + if (test_bit(i, hub->busy_bits)) continue; connect_change = test_bit(i, hub->change_bits); @@ -4839,8 +4870,6 @@ static void hub_events(void) */ if (hub_port_warm_reset_required(hub, portstatus)) { int status; - struct usb_device *udev = - hub->ports[i - 1]->child; dev_dbg(hub_dev, "warm reset port %d\n", i); if (!udev || @@ -4857,6 +4886,24 @@ static void hub_events(void) usb_unlock_device(udev); connect_change = 0; } + /* + * On disconnect USB3 protocol ports transit from U0 to + * SS.Inactive to Rx.Detect. If this happens a warm- + * reset is not needed, but a (re)connect may happen + * before khubd runs and sees the disconnect, and the + * device may be an unknown state. + * + * If the port went through SS.Inactive without khubd + * seeing it the C_LINK_STATE change flag will be set, + * and we reset the dev to put it in a known state. + */ + } else if (udev && hub_is_superspeed(hub->hdev) && + (portchange & USB_PORT_STAT_C_LINK_STATE) && + (portstatus & USB_PORT_STAT_CONNECTION)) { + usb_lock_device(udev); + usb_reset_device(udev); + usb_unlock_device(udev); + connect_change = 0; } if (connect_change) @@ -5114,7 +5161,7 @@ static int usb_reset_and_verify_device(struct usb_device *udev) struct usb_hcd *hcd = bus_to_hcd(udev->bus); struct usb_device_descriptor descriptor = udev->descriptor; struct usb_host_bos *bos; - int i, ret = 0; + int i, j, ret = 0; int port1 = udev->portnum; if (udev->state == USB_STATE_NOTATTACHED || @@ -5240,6 +5287,9 @@ static int usb_reset_and_verify_device(struct usb_device *udev) ret); goto re_enumerate; } + /* Resetting also frees any allocated streams */ + for (j = 0; j < intf->cur_altsetting->desc.bNumEndpoints; j++) + intf->cur_altsetting->endpoint[j].streams = 0; } done: @@ -5342,10 +5392,11 @@ int usb_reset_device(struct usb_device *udev) else if (cintf->condition == USB_INTERFACE_BOUND) rebind = 1; + if (rebind) + cintf->needs_binding = 1; } - if (ret == 0 && rebind) - usb_rebind_intf(cintf); } + usb_unbind_and_rebind_marked_interfaces(udev); } usb_autosuspend_device(udev); diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index 08d95e9..3cdcd0a 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -1293,8 +1293,7 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate) struct usb_interface *iface; struct usb_host_interface *alt; struct usb_hcd *hcd = bus_to_hcd(dev->bus); - int ret; - int manual = 0; + int i, ret, manual = 0; unsigned int epaddr; unsigned int pipe; @@ -1329,6 +1328,10 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate) mutex_unlock(hcd->bandwidth_mutex); return -ENOMEM; } + /* Changing alt-setting also frees any allocated streams */ + for (i = 0; i < iface->cur_altsetting->desc.bNumEndpoints; i++) + iface->cur_altsetting->endpoint[i].streams = 0; + ret = usb_hcd_alloc_bandwidth(dev, NULL, iface->cur_altsetting, alt); if (ret < 0) { dev_info(&dev->dev, "Not enough bandwidth for altsetting %d\n", diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h index a875328..75bf649 100644 --- a/drivers/usb/core/usb.h +++ b/drivers/usb/core/usb.h @@ -55,7 +55,7 @@ extern int usb_match_one_id_intf(struct usb_device *dev, extern int usb_match_device(struct usb_device *dev, const struct usb_device_id *id); extern void usb_forced_unbind_intf(struct usb_interface *intf); -extern void usb_rebind_intf(struct usb_interface *intf); +extern void usb_unbind_and_rebind_marked_interfaces(struct usb_device *udev); extern void usb_hub_release_all_ports(struct usb_device *hdev, struct usb_dev_state *owner); diff --git a/drivers/usb/dwc2/core_intr.c b/drivers/usb/dwc2/core_intr.c index 8205799..c93918b 100644 --- a/drivers/usb/dwc2/core_intr.c +++ b/drivers/usb/dwc2/core_intr.c @@ -72,6 +72,26 @@ static const char *dwc2_op_state_str(struct dwc2_hsotg *hsotg) } /** + * dwc2_handle_usb_port_intr - handles OTG PRTINT interrupts. + * When the PRTINT interrupt fires, there are certain status bits in the Host + * Port that needs to get cleared. + * + * @hsotg: Programming view of DWC_otg controller + */ +static void dwc2_handle_usb_port_intr(struct dwc2_hsotg *hsotg) +{ + u32 hprt0 = readl(hsotg->regs + HPRT0); + + if (hprt0 & HPRT0_ENACHG) { + hprt0 &= ~HPRT0_ENA; + writel(hprt0, hsotg->regs + HPRT0); + } + + /* Clear interrupt */ + writel(GINTSTS_PRTINT, hsotg->regs + GINTSTS); +} + +/** * dwc2_handle_mode_mismatch_intr() - Logs a mode mismatch warning message * * @hsotg: Programming view of DWC_otg controller @@ -479,9 +499,8 @@ irqreturn_t dwc2_handle_common_intr(int irq, void *dev) if (dwc2_is_device_mode(hsotg)) { dev_dbg(hsotg->dev, " --Port interrupt received in Device mode--\n"); - gintsts = GINTSTS_PRTINT; - writel(gintsts, hsotg->regs + GINTSTS); - retval = 1; + dwc2_handle_usb_port_intr(hsotg); + retval = IRQ_HANDLED; } } diff --git a/drivers/usb/dwc2/hcd_intr.c b/drivers/usb/dwc2/hcd_intr.c index 012f17e..47b9eb5 100644 --- a/drivers/usb/dwc2/hcd_intr.c +++ b/drivers/usb/dwc2/hcd_intr.c @@ -975,8 +975,8 @@ static void dwc2_hc_xfercomp_intr(struct dwc2_hsotg *hsotg, struct dwc2_qtd *qtd) { struct dwc2_hcd_urb *urb = qtd->urb; - int pipe_type = dwc2_hcd_get_pipe_type(&urb->pipe_info); enum dwc2_halt_status halt_status = DWC2_HC_XFER_COMPLETE; + int pipe_type; int urb_xfer_done; if (dbg_hc(chan)) @@ -984,6 +984,11 @@ static void dwc2_hc_xfercomp_intr(struct dwc2_hsotg *hsotg, "--Host Channel %d Interrupt: Transfer Complete--\n", chnum); + if (!urb) + goto handle_xfercomp_done; + + pipe_type = dwc2_hcd_get_pipe_type(&urb->pipe_info); + if (hsotg->core_params->dma_desc_enable > 0) { dwc2_hcd_complete_xfer_ddma(hsotg, chan, chnum, halt_status); if (pipe_type == USB_ENDPOINT_XFER_ISOC) @@ -1005,9 +1010,6 @@ static void dwc2_hc_xfercomp_intr(struct dwc2_hsotg *hsotg, } } - if (!urb) - goto handle_xfercomp_done; - /* Update the QTD and URB states */ switch (pipe_type) { case USB_ENDPOINT_XFER_CONTROL: @@ -1105,7 +1107,7 @@ static void dwc2_hc_stall_intr(struct dwc2_hsotg *hsotg, struct dwc2_qtd *qtd) { struct dwc2_hcd_urb *urb = qtd->urb; - int pipe_type = dwc2_hcd_get_pipe_type(&urb->pipe_info); + int pipe_type; dev_dbg(hsotg->dev, "--Host Channel %d Interrupt: STALL Received--\n", chnum); @@ -1119,6 +1121,8 @@ static void dwc2_hc_stall_intr(struct dwc2_hsotg *hsotg, if (!urb) goto handle_stall_halt; + pipe_type = dwc2_hcd_get_pipe_type(&urb->pipe_info); + if (pipe_type == USB_ENDPOINT_XFER_CONTROL) dwc2_host_complete(hsotg, qtd, -EPIPE); diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index a49217a..d001417 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -61,9 +61,10 @@ void dwc3_set_mode(struct dwc3 *dwc, u32 mode) * dwc3_core_soft_reset - Issues core soft reset and PHY reset * @dwc: pointer to our context structure */ -static void dwc3_core_soft_reset(struct dwc3 *dwc) +static int dwc3_core_soft_reset(struct dwc3 *dwc) { u32 reg; + int ret; /* Before Resetting PHY, put Core in Reset */ reg = dwc3_readl(dwc->regs, DWC3_GCTL); @@ -82,6 +83,15 @@ static void dwc3_core_soft_reset(struct dwc3 *dwc) usb_phy_init(dwc->usb2_phy); usb_phy_init(dwc->usb3_phy); + ret = phy_init(dwc->usb2_generic_phy); + if (ret < 0) + return ret; + + ret = phy_init(dwc->usb3_generic_phy); + if (ret < 0) { + phy_exit(dwc->usb2_generic_phy); + return ret; + } mdelay(100); /* Clear USB3 PHY reset */ @@ -100,6 +110,8 @@ static void dwc3_core_soft_reset(struct dwc3 *dwc) reg = dwc3_readl(dwc->regs, DWC3_GCTL); reg &= ~DWC3_GCTL_CORESOFTRESET; dwc3_writel(dwc->regs, DWC3_GCTL, reg); + + return 0; } /** @@ -242,6 +254,90 @@ static void dwc3_event_buffers_cleanup(struct dwc3 *dwc) } } +static int dwc3_alloc_scratch_buffers(struct dwc3 *dwc) +{ + if (!dwc->has_hibernation) + return 0; + + if (!dwc->nr_scratch) + return 0; + + dwc->scratchbuf = kmalloc_array(dwc->nr_scratch, + DWC3_SCRATCHBUF_SIZE, GFP_KERNEL); + if (!dwc->scratchbuf) + return -ENOMEM; + + return 0; +} + +static int dwc3_setup_scratch_buffers(struct dwc3 *dwc) +{ + dma_addr_t scratch_addr; + u32 param; + int ret; + + if (!dwc->has_hibernation) + return 0; + + if (!dwc->nr_scratch) + return 0; + + /* should never fall here */ + if (!WARN_ON(dwc->scratchbuf)) + return 0; + + scratch_addr = dma_map_single(dwc->dev, dwc->scratchbuf, + dwc->nr_scratch * DWC3_SCRATCHBUF_SIZE, + DMA_BIDIRECTIONAL); + if (dma_mapping_error(dwc->dev, scratch_addr)) { + dev_err(dwc->dev, "failed to map scratch buffer\n"); + ret = -EFAULT; + goto err0; + } + + dwc->scratch_addr = scratch_addr; + + param = lower_32_bits(scratch_addr); + + ret = dwc3_send_gadget_generic_command(dwc, + DWC3_DGCMD_SET_SCRATCHPAD_ADDR_LO, param); + if (ret < 0) + goto err1; + + param = upper_32_bits(scratch_addr); + + ret = dwc3_send_gadget_generic_command(dwc, + DWC3_DGCMD_SET_SCRATCHPAD_ADDR_HI, param); + if (ret < 0) + goto err1; + + return 0; + +err1: + dma_unmap_single(dwc->dev, dwc->scratch_addr, dwc->nr_scratch * + DWC3_SCRATCHBUF_SIZE, DMA_BIDIRECTIONAL); + +err0: + return ret; +} + +static void dwc3_free_scratch_buffers(struct dwc3 *dwc) +{ + if (!dwc->has_hibernation) + return; + + if (!dwc->nr_scratch) + return; + + /* should never fall here */ + if (!WARN_ON(dwc->scratchbuf)) + return; + + dma_unmap_single(dwc->dev, dwc->scratch_addr, dwc->nr_scratch * + DWC3_SCRATCHBUF_SIZE, DMA_BIDIRECTIONAL); + kfree(dwc->scratchbuf); +} + static void dwc3_core_num_eps(struct dwc3 *dwc) { struct dwc3_hwparams *parms = &dwc->hwparams; @@ -277,6 +373,7 @@ static void dwc3_cache_hwparams(struct dwc3 *dwc) static int dwc3_core_init(struct dwc3 *dwc) { unsigned long timeout; + u32 hwparams4 = dwc->hwparams.hwparams4; u32 reg; int ret; @@ -306,7 +403,9 @@ static int dwc3_core_init(struct dwc3 *dwc) cpu_relax(); } while (true); - dwc3_core_soft_reset(dwc); + ret = dwc3_core_soft_reset(dwc); + if (ret) + goto err0; reg = dwc3_readl(dwc->regs, DWC3_GCTL); reg &= ~DWC3_GCTL_SCALEDOWN_MASK; @@ -314,7 +413,29 @@ static int dwc3_core_init(struct dwc3 *dwc) switch (DWC3_GHWPARAMS1_EN_PWROPT(dwc->hwparams.hwparams1)) { case DWC3_GHWPARAMS1_EN_PWROPT_CLK: - reg &= ~DWC3_GCTL_DSBLCLKGTNG; + /** + * WORKAROUND: DWC3 revisions between 2.10a and 2.50a have an + * issue which would cause xHCI compliance tests to fail. + * + * Because of that we cannot enable clock gating on such + * configurations. + * + * Refers to: + * + * STAR#9000588375: Clock Gating, SOF Issues when ref_clk-Based + * SOF/ITP Mode Used + */ + if ((dwc->dr_mode == USB_DR_MODE_HOST || + dwc->dr_mode == USB_DR_MODE_OTG) && + (dwc->revision >= DWC3_REVISION_210A && + dwc->revision <= DWC3_REVISION_250A)) + reg |= DWC3_GCTL_DSBLCLKGTNG | DWC3_GCTL_SOFITPSYNC; + else + reg &= ~DWC3_GCTL_DSBLCLKGTNG; + break; + case DWC3_GHWPARAMS1_EN_PWROPT_HIB: + /* enable hibernation here */ + dwc->nr_scratch = DWC3_GHWPARAMS4_HIBER_SCRATCHBUFS(hwparams4); break; default: dev_dbg(dwc->dev, "No power optimization available\n"); @@ -333,16 +454,36 @@ static int dwc3_core_init(struct dwc3 *dwc) dwc3_writel(dwc->regs, DWC3_GCTL, reg); + ret = dwc3_alloc_scratch_buffers(dwc); + if (ret) + goto err1; + + ret = dwc3_setup_scratch_buffers(dwc); + if (ret) + goto err2; + return 0; +err2: + dwc3_free_scratch_buffers(dwc); + +err1: + usb_phy_shutdown(dwc->usb2_phy); + usb_phy_shutdown(dwc->usb3_phy); + phy_exit(dwc->usb2_generic_phy); + phy_exit(dwc->usb3_generic_phy); + err0: return ret; } static void dwc3_core_exit(struct dwc3 *dwc) { + dwc3_free_scratch_buffers(dwc); usb_phy_shutdown(dwc->usb2_phy); usb_phy_shutdown(dwc->usb3_phy); + phy_exit(dwc->usb2_generic_phy); + phy_exit(dwc->usb3_generic_phy); } #define DWC3_ALIGN_MASK (16 - 1) @@ -411,32 +552,52 @@ static int dwc3_probe(struct platform_device *pdev) if (IS_ERR(dwc->usb2_phy)) { ret = PTR_ERR(dwc->usb2_phy); - - /* - * if -ENXIO is returned, it means PHY layer wasn't - * enabled, so it makes no sense to return -EPROBE_DEFER - * in that case, since no PHY driver will ever probe. - */ - if (ret == -ENXIO) + if (ret == -ENXIO || ret == -ENODEV) { + dwc->usb2_phy = NULL; + } else if (ret == -EPROBE_DEFER) { return ret; - - dev_err(dev, "no usb2 phy configured\n"); - return -EPROBE_DEFER; + } else { + dev_err(dev, "no usb2 phy configured\n"); + return ret; + } } if (IS_ERR(dwc->usb3_phy)) { ret = PTR_ERR(dwc->usb3_phy); + if (ret == -ENXIO || ret == -ENODEV) { + dwc->usb3_phy = NULL; + } else if (ret == -EPROBE_DEFER) { + return ret; + } else { + dev_err(dev, "no usb3 phy configured\n"); + return ret; + } + } - /* - * if -ENXIO is returned, it means PHY layer wasn't - * enabled, so it makes no sense to return -EPROBE_DEFER - * in that case, since no PHY driver will ever probe. - */ - if (ret == -ENXIO) + dwc->usb2_generic_phy = devm_phy_get(dev, "usb2-phy"); + if (IS_ERR(dwc->usb2_generic_phy)) { + ret = PTR_ERR(dwc->usb2_generic_phy); + if (ret == -ENOSYS || ret == -ENODEV) { + dwc->usb2_generic_phy = NULL; + } else if (ret == -EPROBE_DEFER) { + return ret; + } else { + dev_err(dev, "no usb2 phy configured\n"); return ret; + } + } - dev_err(dev, "no usb3 phy configured\n"); - return -EPROBE_DEFER; + dwc->usb3_generic_phy = devm_phy_get(dev, "usb3-phy"); + if (IS_ERR(dwc->usb3_generic_phy)) { + ret = PTR_ERR(dwc->usb3_generic_phy); + if (ret == -ENOSYS || ret == -ENODEV) { + dwc->usb3_generic_phy = NULL; + } else if (ret == -EPROBE_DEFER) { + return ret; + } else { + dev_err(dev, "no usb3 phy configured\n"); + return ret; + } } dwc->xhci_resources[0].start = res->start; @@ -479,6 +640,14 @@ static int dwc3_probe(struct platform_device *pdev) goto err0; } + if (IS_ENABLED(CONFIG_USB_DWC3_HOST)) + dwc->dr_mode = USB_DR_MODE_HOST; + else if (IS_ENABLED(CONFIG_USB_DWC3_GADGET)) + dwc->dr_mode = USB_DR_MODE_PERIPHERAL; + + if (dwc->dr_mode == USB_DR_MODE_UNKNOWN) + dwc->dr_mode = USB_DR_MODE_OTG; + ret = dwc3_core_init(dwc); if (ret) { dev_err(dev, "failed to initialize core\n"); @@ -487,21 +656,20 @@ static int dwc3_probe(struct platform_device *pdev) usb_phy_set_suspend(dwc->usb2_phy, 0); usb_phy_set_suspend(dwc->usb3_phy, 0); + ret = phy_power_on(dwc->usb2_generic_phy); + if (ret < 0) + goto err1; + + ret = phy_power_on(dwc->usb3_generic_phy); + if (ret < 0) + goto err_usb2phy_power; ret = dwc3_event_buffers_setup(dwc); if (ret) { dev_err(dwc->dev, "failed to setup event buffers\n"); - goto err1; + goto err_usb3phy_power; } - if (IS_ENABLED(CONFIG_USB_DWC3_HOST)) - dwc->dr_mode = USB_DR_MODE_HOST; - else if (IS_ENABLED(CONFIG_USB_DWC3_GADGET)) - dwc->dr_mode = USB_DR_MODE_PERIPHERAL; - - if (dwc->dr_mode == USB_DR_MODE_UNKNOWN) - dwc->dr_mode = USB_DR_MODE_OTG; - switch (dwc->dr_mode) { case USB_DR_MODE_PERIPHERAL: dwc3_set_mode(dwc, DWC3_GCTL_PRTCAP_DEVICE); @@ -568,6 +736,12 @@ err3: err2: dwc3_event_buffers_cleanup(dwc); +err_usb3phy_power: + phy_power_off(dwc->usb3_generic_phy); + +err_usb2phy_power: + phy_power_off(dwc->usb2_generic_phy); + err1: usb_phy_set_suspend(dwc->usb2_phy, 1); usb_phy_set_suspend(dwc->usb3_phy, 1); @@ -585,6 +759,8 @@ static int dwc3_remove(struct platform_device *pdev) usb_phy_set_suspend(dwc->usb2_phy, 1); usb_phy_set_suspend(dwc->usb3_phy, 1); + phy_power_off(dwc->usb2_generic_phy); + phy_power_off(dwc->usb3_generic_phy); pm_runtime_put_sync(&pdev->dev); pm_runtime_disable(&pdev->dev); @@ -682,6 +858,8 @@ static int dwc3_suspend(struct device *dev) usb_phy_shutdown(dwc->usb3_phy); usb_phy_shutdown(dwc->usb2_phy); + phy_exit(dwc->usb2_generic_phy); + phy_exit(dwc->usb3_generic_phy); return 0; } @@ -690,9 +868,17 @@ static int dwc3_resume(struct device *dev) { struct dwc3 *dwc = dev_get_drvdata(dev); unsigned long flags; + int ret; usb_phy_init(dwc->usb3_phy); usb_phy_init(dwc->usb2_phy); + ret = phy_init(dwc->usb2_generic_phy); + if (ret < 0) + return ret; + + ret = phy_init(dwc->usb3_generic_phy); + if (ret < 0) + goto err_usb2phy_init; spin_lock_irqsave(&dwc->lock, flags); @@ -716,6 +902,11 @@ static int dwc3_resume(struct device *dev) pm_runtime_enable(dev); return 0; + +err_usb2phy_init: + phy_exit(dwc->usb2_generic_phy); + + return ret; } static const struct dev_pm_ops dwc3_dev_pm_ops = { diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index f8af8d4..57332e3 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -31,11 +31,14 @@ #include <linux/usb/gadget.h> #include <linux/usb/otg.h> +#include <linux/phy/phy.h> + /* Global constants */ #define DWC3_EP0_BOUNCE_SIZE 512 #define DWC3_ENDPOINTS_NUM 32 #define DWC3_XHCI_RESOURCES_NUM 2 +#define DWC3_SCRATCHBUF_SIZE 4096 /* each buffer is assumed to be 4KiB */ #define DWC3_EVENT_SIZE 4 /* bytes */ #define DWC3_EVENT_MAX_NUM 64 /* 2 events/endpoint */ #define DWC3_EVENT_BUFFERS_SIZE (DWC3_EVENT_SIZE * DWC3_EVENT_MAX_NUM) @@ -157,6 +160,7 @@ #define DWC3_GCTL_PRTCAP_OTG 3 #define DWC3_GCTL_CORESOFTRESET (1 << 11) +#define DWC3_GCTL_SOFITPSYNC (1 << 10) #define DWC3_GCTL_SCALEDOWN(n) ((n) << 4) #define DWC3_GCTL_SCALEDOWN_MASK DWC3_GCTL_SCALEDOWN(3) #define DWC3_GCTL_DISSCRAMBLE (1 << 3) @@ -318,7 +322,7 @@ /* Device Endpoint Command Register */ #define DWC3_DEPCMD_PARAM_SHIFT 16 #define DWC3_DEPCMD_PARAM(x) ((x) << DWC3_DEPCMD_PARAM_SHIFT) -#define DWC3_DEPCMD_GET_RSC_IDX(x) (((x) >> DWC3_DEPCMD_PARAM_SHIFT) & 0x7f) +#define DWC3_DEPCMD_GET_RSC_IDX(x) (((x) >> DWC3_DEPCMD_PARAM_SHIFT) & 0x7f) #define DWC3_DEPCMD_STATUS(x) (((x) >> 15) & 1) #define DWC3_DEPCMD_HIPRI_FORCERM (1 << 11) #define DWC3_DEPCMD_CMDACT (1 << 10) @@ -393,6 +397,7 @@ struct dwc3_event_buffer { * @busy_slot: first slot which is owned by HW * @desc: usb_endpoint_descriptor pointer * @dwc: pointer to DWC controller + * @saved_state: ep state saved during hibernation * @flags: endpoint flags (wedged, stalled, ...) * @current_trb: index of current used trb * @number: endpoint number (1 - 15) @@ -415,6 +420,7 @@ struct dwc3_ep { const struct usb_ss_ep_comp_descriptor *comp_desc; struct dwc3 *dwc; + u32 saved_state; unsigned flags; #define DWC3_EP_ENABLED (1 << 0) #define DWC3_EP_STALL (1 << 1) @@ -598,6 +604,7 @@ struct dwc3_scratchpad_array { * @ep0_trb: dma address of ep0_trb * @ep0_usb_req: dummy req used while handling STD USB requests * @ep0_bounce_addr: dma address of ep0_bounce + * @scratch_addr: dma address of scratchbuf * @lock: for synchronizing * @dev: pointer to our struct device * @xhci: pointer to our xHCI child @@ -606,6 +613,7 @@ struct dwc3_scratchpad_array { * @gadget_driver: pointer to the gadget driver * @regs: base address for our registers * @regs_size: address space size + * @nr_scratch: number of scratch buffers * @num_event_buffers: calculated number of event buffers * @u1u2: only used on revisions <1.83a for workaround * @maximum_speed: maximum speed requested (mainly for testing purposes) @@ -613,16 +621,10 @@ struct dwc3_scratchpad_array { * @dr_mode: requested mode of operation * @usb2_phy: pointer to USB2 PHY * @usb3_phy: pointer to USB3 PHY + * @usb2_generic_phy: pointer to USB2 PHY + * @usb3_generic_phy: pointer to USB3 PHY * @dcfg: saved contents of DCFG register * @gctl: saved contents of GCTL register - * @is_selfpowered: true when we are selfpowered - * @three_stage_setup: set if we perform a three phase setup - * @ep0_bounced: true when we used bounce buffer - * @ep0_expect_in: true when we expect a DATA IN transfer - * @start_config_issued: true when StartConfig command has been issued - * @setup_packet_pending: true when there's a Setup Packet in FIFO. Workaround - * @needs_fifo_resize: not all users might want fifo resizing, flag it - * @resize_fifos: tells us it's ok to reconfigure our TxFIFO sizes. * @isoch_delay: wValue from Set Isochronous Delay request; * @u2sel: parameter from Set SEL request. * @u2pel: parameter from Set SEL request. @@ -637,15 +639,31 @@ struct dwc3_scratchpad_array { * @mem: points to start of memory which is used for this struct. * @hwparams: copy of hwparams registers * @root: debugfs root folder pointer + * @regset: debugfs pointer to regdump file + * @test_mode: true when we're entering a USB test mode + * @test_mode_nr: test feature selector + * @delayed_status: true when gadget driver asks for delayed status + * @ep0_bounced: true when we used bounce buffer + * @ep0_expect_in: true when we expect a DATA IN transfer + * @has_hibernation: true when dwc3 was configured with Hibernation + * @is_selfpowered: true when we are selfpowered + * @needs_fifo_resize: not all users might want fifo resizing, flag it + * @pullups_connected: true when Run/Stop bit is set + * @resize_fifos: tells us it's ok to reconfigure our TxFIFO sizes. + * @setup_packet_pending: true when there's a Setup Packet in FIFO. Workaround + * @start_config_issued: true when StartConfig command has been issued + * @three_stage_setup: set if we perform a three phase setup */ struct dwc3 { struct usb_ctrlrequest *ctrl_req; struct dwc3_trb *ep0_trb; void *ep0_bounce; + void *scratchbuf; u8 *setup_buf; dma_addr_t ctrl_req_addr; dma_addr_t ep0_trb_addr; dma_addr_t ep0_bounce_addr; + dma_addr_t scratch_addr; struct dwc3_request ep0_usb_req; /* device lock */ @@ -665,6 +683,9 @@ struct dwc3 { struct usb_phy *usb2_phy; struct usb_phy *usb3_phy; + struct phy *usb2_generic_phy; + struct phy *usb3_generic_phy; + void __iomem *regs; size_t regs_size; @@ -674,6 +695,7 @@ struct dwc3 { u32 dcfg; u32 gctl; + u32 nr_scratch; u32 num_event_buffers; u32 u1u2; u32 maximum_speed; @@ -695,17 +717,9 @@ struct dwc3 { #define DWC3_REVISION_230A 0x5533230a #define DWC3_REVISION_240A 0x5533240a #define DWC3_REVISION_250A 0x5533250a - - unsigned is_selfpowered:1; - unsigned three_stage_setup:1; - unsigned ep0_bounced:1; - unsigned ep0_expect_in:1; - unsigned start_config_issued:1; - unsigned setup_packet_pending:1; - unsigned delayed_status:1; - unsigned needs_fifo_resize:1; - unsigned resize_fifos:1; - unsigned pullups_connected:1; +#define DWC3_REVISION_260A 0x5533260a +#define DWC3_REVISION_270A 0x5533270a +#define DWC3_REVISION_280A 0x5533280a enum dwc3_ep0_next ep0_next_event; enum dwc3_ep0_state ep0state; @@ -730,6 +744,18 @@ struct dwc3 { u8 test_mode; u8 test_mode_nr; + + unsigned delayed_status:1; + unsigned ep0_bounced:1; + unsigned ep0_expect_in:1; + unsigned has_hibernation:1; + unsigned is_selfpowered:1; + unsigned needs_fifo_resize:1; + unsigned pullups_connected:1; + unsigned resize_fifos:1; + unsigned setup_packet_pending:1; + unsigned start_config_issued:1; + unsigned three_stage_setup:1; }; /* -------------------------------------------------------------------------- */ @@ -815,15 +841,15 @@ struct dwc3_event_depevt { * 12 - VndrDevTstRcved * @reserved15_12: Reserved, not used * @event_info: Information about this event - * @reserved31_24: Reserved, not used + * @reserved31_25: Reserved, not used */ struct dwc3_event_devt { u32 one_bit:1; u32 device_event:7; u32 type:4; u32 reserved15_12:4; - u32 event_info:8; - u32 reserved31_24:8; + u32 event_info:9; + u32 reserved31_25:7; } __packed; /** @@ -856,6 +882,19 @@ union dwc3_event { struct dwc3_event_gevt gevt; }; +/** + * struct dwc3_gadget_ep_cmd_params - representation of endpoint command + * parameters + * @param2: third parameter + * @param1: second parameter + * @param0: first parameter + */ +struct dwc3_gadget_ep_cmd_params { + u32 param2; + u32 param1; + u32 param0; +}; + /* * DWC3 Features to be used as Driver Data */ @@ -881,11 +920,31 @@ static inline void dwc3_host_exit(struct dwc3 *dwc) #if IS_ENABLED(CONFIG_USB_DWC3_GADGET) || IS_ENABLED(CONFIG_USB_DWC3_DUAL_ROLE) int dwc3_gadget_init(struct dwc3 *dwc); void dwc3_gadget_exit(struct dwc3 *dwc); +int dwc3_gadget_set_test_mode(struct dwc3 *dwc, int mode); +int dwc3_gadget_get_link_state(struct dwc3 *dwc); +int dwc3_gadget_set_link_state(struct dwc3 *dwc, enum dwc3_link_state state); +int dwc3_send_gadget_ep_cmd(struct dwc3 *dwc, unsigned ep, + unsigned cmd, struct dwc3_gadget_ep_cmd_params *params); +int dwc3_send_gadget_generic_command(struct dwc3 *dwc, int cmd, u32 param); #else static inline int dwc3_gadget_init(struct dwc3 *dwc) { return 0; } static inline void dwc3_gadget_exit(struct dwc3 *dwc) { } +static inline int dwc3_gadget_set_test_mode(struct dwc3 *dwc, int mode) +{ return 0; } +static inline int dwc3_gadget_get_link_state(struct dwc3 *dwc) +{ return 0; } +static inline int dwc3_gadget_set_link_state(struct dwc3 *dwc, + enum dwc3_link_state state) +{ return 0; } + +static inline int dwc3_send_gadget_ep_cmd(struct dwc3 *dwc, unsigned ep, + unsigned cmd, struct dwc3_gadget_ep_cmd_params *params) +{ return 0; } +static inline int dwc3_send_gadget_generic_command(struct dwc3 *dwc, + int cmd, u32 param) +{ return 0; } #endif /* power management interface */ diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c index b1d7ee6..1160ff4 100644 --- a/drivers/usb/dwc3/dwc3-omap.c +++ b/drivers/usb/dwc3/dwc3-omap.c @@ -423,11 +423,6 @@ static int dwc3_omap_probe(struct platform_device *pdev) } res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - dev_err(dev, "missing memory base resource\n"); - return -EINVAL; - } - base = devm_ioremap_resource(dev, res); if (IS_ERR(base)) return PTR_ERR(base); diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 2da0a5a..a740eac 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -68,6 +68,22 @@ int dwc3_gadget_set_test_mode(struct dwc3 *dwc, int mode) } /** + * dwc3_gadget_get_link_state - Gets current state of USB Link + * @dwc: pointer to our context structure + * + * Caller should take care of locking. This function will + * return the link state on success (>= 0) or -ETIMEDOUT. + */ +int dwc3_gadget_get_link_state(struct dwc3 *dwc) +{ + u32 reg; + + reg = dwc3_readl(dwc->regs, DWC3_DSTS); + + return DWC3_DSTS_USBLNKST(reg); +} + +/** * dwc3_gadget_set_link_state - Sets USB Link to a particular State * @dwc: pointer to our context structure * @state: the state to put link into @@ -417,7 +433,7 @@ static int dwc3_gadget_start_config(struct dwc3 *dwc, struct dwc3_ep *dep) static int dwc3_gadget_set_ep_config(struct dwc3 *dwc, struct dwc3_ep *dep, const struct usb_endpoint_descriptor *desc, const struct usb_ss_ep_comp_descriptor *comp_desc, - bool ignore) + bool ignore, bool restore) { struct dwc3_gadget_ep_cmd_params params; @@ -436,6 +452,11 @@ static int dwc3_gadget_set_ep_config(struct dwc3 *dwc, struct dwc3_ep *dep, if (ignore) params.param0 |= DWC3_DEPCFG_IGN_SEQ_NUM; + if (restore) { + params.param0 |= DWC3_DEPCFG_ACTION_RESTORE; + params.param2 |= dep->saved_state; + } + params.param1 = DWC3_DEPCFG_XFER_COMPLETE_EN | DWC3_DEPCFG_XFER_NOT_READY_EN; @@ -494,7 +515,7 @@ static int dwc3_gadget_set_xfer_resource(struct dwc3 *dwc, struct dwc3_ep *dep) static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep, const struct usb_endpoint_descriptor *desc, const struct usb_ss_ep_comp_descriptor *comp_desc, - bool ignore) + bool ignore, bool restore) { struct dwc3 *dwc = dep->dwc; u32 reg; @@ -508,7 +529,8 @@ static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep, return ret; } - ret = dwc3_gadget_set_ep_config(dwc, dep, desc, comp_desc, ignore); + ret = dwc3_gadget_set_ep_config(dwc, dep, desc, comp_desc, ignore, + restore); if (ret) return ret; @@ -548,13 +570,13 @@ static int __dwc3_gadget_ep_enable(struct dwc3_ep *dep, return 0; } -static void dwc3_stop_active_transfer(struct dwc3 *dwc, u32 epnum); +static void dwc3_stop_active_transfer(struct dwc3 *dwc, u32 epnum, bool force); static void dwc3_remove_requests(struct dwc3 *dwc, struct dwc3_ep *dep) { struct dwc3_request *req; if (!list_empty(&dep->req_queued)) { - dwc3_stop_active_transfer(dwc, dep->number); + dwc3_stop_active_transfer(dwc, dep->number, true); /* - giveback all requests to gadget driver */ while (!list_empty(&dep->req_queued)) { @@ -659,7 +681,7 @@ static int dwc3_gadget_ep_enable(struct usb_ep *ep, } spin_lock_irqsave(&dwc->lock, flags); - ret = __dwc3_gadget_ep_enable(dep, desc, ep->comp_desc, false); + ret = __dwc3_gadget_ep_enable(dep, desc, ep->comp_desc, false, false); spin_unlock_irqrestore(&dwc->lock, flags); return ret; @@ -771,9 +793,6 @@ static void dwc3_prepare_one_trb(struct dwc3_ep *dep, trb->ctrl = DWC3_TRBCTL_ISOCHRONOUS_FIRST; else trb->ctrl = DWC3_TRBCTL_ISOCHRONOUS; - - if (!req->request.no_interrupt && !chain) - trb->ctrl |= DWC3_TRB_CTRL_IOC; break; case USB_ENDPOINT_XFER_BULK: @@ -788,6 +807,9 @@ static void dwc3_prepare_one_trb(struct dwc3_ep *dep, BUG(); } + if (!req->request.no_interrupt && !chain) + trb->ctrl |= DWC3_TRB_CTRL_IOC; + if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) { trb->ctrl |= DWC3_TRB_CTRL_ISP_IMI; trb->ctrl |= DWC3_TRB_CTRL_CSP; @@ -1077,7 +1099,7 @@ static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req) */ if (usb_endpoint_xfer_isoc(dep->endpoint.desc)) { if (list_empty(&dep->req_queued)) { - dwc3_stop_active_transfer(dwc, dep->number); + dwc3_stop_active_transfer(dwc, dep->number, true); dep->flags = DWC3_EP_ENABLED; } return 0; @@ -1107,6 +1129,23 @@ static int __dwc3_gadget_ep_queue(struct dwc3_ep *dep, struct dwc3_request *req) return ret; } + /* + * 4. Stream Capable Bulk Endpoints. We need to start the transfer + * right away, otherwise host will not know we have streams to be + * handled. + */ + if (dep->stream_capable) { + int ret; + + ret = __dwc3_gadget_kick_transfer(dep, 0, true); + if (ret && ret != -EBUSY) { + struct dwc3 *dwc = dep->dwc; + + dev_dbg(dwc->dev, "%s: failed to kick transfers\n", + dep->name); + } + } + return 0; } @@ -1163,7 +1202,7 @@ static int dwc3_gadget_ep_dequeue(struct usb_ep *ep, } if (r == req) { /* wait until it is processed */ - dwc3_stop_active_transfer(dwc, dep->number); + dwc3_stop_active_transfer(dwc, dep->number, true); goto out1; } dev_err(dwc->dev, "request %p was not queued to %s\n", @@ -1194,8 +1233,7 @@ int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value) ret = dwc3_send_gadget_ep_cmd(dwc, dep->number, DWC3_DEPCMD_SETSTALL, ¶ms); if (ret) - dev_err(dwc->dev, "failed to %s STALL on %s\n", - value ? "set" : "clear", + dev_err(dwc->dev, "failed to set STALL on %s\n", dep->name); else dep->flags |= DWC3_EP_STALL; @@ -1203,8 +1241,7 @@ int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value) ret = dwc3_send_gadget_ep_cmd(dwc, dep->number, DWC3_DEPCMD_CLEARSTALL, ¶ms); if (ret) - dev_err(dwc->dev, "failed to %s STALL on %s\n", - value ? "set" : "clear", + dev_err(dwc->dev, "failed to clear STALL on %s\n", dep->name); else dep->flags &= ~(DWC3_EP_STALL | DWC3_EP_WEDGE); @@ -1387,7 +1424,7 @@ static int dwc3_gadget_set_selfpowered(struct usb_gadget *g, return 0; } -static int dwc3_gadget_run_stop(struct dwc3 *dwc, int is_on) +static int dwc3_gadget_run_stop(struct dwc3 *dwc, int is_on, int suspend) { u32 reg; u32 timeout = 500; @@ -1402,9 +1439,17 @@ static int dwc3_gadget_run_stop(struct dwc3 *dwc, int is_on) if (dwc->revision >= DWC3_REVISION_194A) reg &= ~DWC3_DCTL_KEEP_CONNECT; reg |= DWC3_DCTL_RUN_STOP; + + if (dwc->has_hibernation) + reg |= DWC3_DCTL_KEEP_CONNECT; + dwc->pullups_connected = true; } else { reg &= ~DWC3_DCTL_RUN_STOP; + + if (dwc->has_hibernation && !suspend) + reg &= ~DWC3_DCTL_KEEP_CONNECT; + dwc->pullups_connected = false; } @@ -1442,7 +1487,7 @@ static int dwc3_gadget_pullup(struct usb_gadget *g, int is_on) is_on = !!is_on; spin_lock_irqsave(&dwc->lock, flags); - ret = dwc3_gadget_run_stop(dwc, is_on); + ret = dwc3_gadget_run_stop(dwc, is_on, false); spin_unlock_irqrestore(&dwc->lock, flags); return ret; @@ -1549,14 +1594,16 @@ static int dwc3_gadget_start(struct usb_gadget *g, dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512); dep = dwc->eps[0]; - ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL, false); + ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL, false, + false); if (ret) { dev_err(dwc->dev, "failed to enable %s\n", dep->name); goto err2; } dep = dwc->eps[1]; - ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL, false); + ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL, false, + false); if (ret) { dev_err(dwc->dev, "failed to enable %s\n", dep->name); goto err3; @@ -1849,15 +1896,12 @@ static int dwc3_cleanup_done_reqs(struct dwc3 *dwc, struct dwc3_ep *dep, */ dep->flags = DWC3_EP_PENDING_REQUEST; } else { - dwc3_stop_active_transfer(dwc, dep->number); + dwc3_stop_active_transfer(dwc, dep->number, true); dep->flags = DWC3_EP_ENABLED; } return 1; } - if ((event->status & DEPEVT_STATUS_IOC) && - (trb->ctrl & DWC3_TRB_CTRL_IOC)) - return 0; return 1; } @@ -1999,7 +2043,25 @@ static void dwc3_disconnect_gadget(struct dwc3 *dwc) } } -static void dwc3_stop_active_transfer(struct dwc3 *dwc, u32 epnum) +static void dwc3_suspend_gadget(struct dwc3 *dwc) +{ + if (dwc->gadget_driver && dwc->gadget_driver->suspend) { + spin_unlock(&dwc->lock); + dwc->gadget_driver->suspend(&dwc->gadget); + spin_lock(&dwc->lock); + } +} + +static void dwc3_resume_gadget(struct dwc3 *dwc) +{ + if (dwc->gadget_driver && dwc->gadget_driver->resume) { + spin_unlock(&dwc->lock); + dwc->gadget_driver->resume(&dwc->gadget); + spin_lock(&dwc->lock); + } +} + +static void dwc3_stop_active_transfer(struct dwc3 *dwc, u32 epnum, bool force) { struct dwc3_ep *dep; struct dwc3_gadget_ep_cmd_params params; @@ -2031,7 +2093,8 @@ static void dwc3_stop_active_transfer(struct dwc3 *dwc, u32 epnum) */ cmd = DWC3_DEPCMD_ENDTRANSFER; - cmd |= DWC3_DEPCMD_HIPRI_FORCERM | DWC3_DEPCMD_CMDIOC; + cmd |= force ? DWC3_DEPCMD_HIPRI_FORCERM : 0; + cmd |= DWC3_DEPCMD_CMDIOC; cmd |= DWC3_DEPCMD_PARAM(dep->resource_index); memset(¶ms, 0, sizeof(params)); ret = dwc3_send_gadget_ep_cmd(dwc, dep->number, cmd, ¶ms); @@ -2260,17 +2323,23 @@ static void dwc3_gadget_conndone_interrupt(struct dwc3 *dwc) reg |= DWC3_DCTL_HIRD_THRES(12); dwc3_writel(dwc->regs, DWC3_DCTL, reg); + } else { + reg = dwc3_readl(dwc->regs, DWC3_DCTL); + reg &= ~DWC3_DCTL_HIRD_THRES_MASK; + dwc3_writel(dwc->regs, DWC3_DCTL, reg); } dep = dwc->eps[0]; - ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL, true); + ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL, true, + false); if (ret) { dev_err(dwc->dev, "failed to enable %s\n", dep->name); return; } dep = dwc->eps[1]; - ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL, true); + ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL, true, + false); if (ret) { dev_err(dwc->dev, "failed to enable %s\n", dep->name); return; @@ -2378,9 +2447,50 @@ static void dwc3_gadget_linksts_change_interrupt(struct dwc3 *dwc, dwc->link_state = next; + switch (next) { + case DWC3_LINK_STATE_U1: + if (dwc->speed == USB_SPEED_SUPER) + dwc3_suspend_gadget(dwc); + break; + case DWC3_LINK_STATE_U2: + case DWC3_LINK_STATE_U3: + dwc3_suspend_gadget(dwc); + break; + case DWC3_LINK_STATE_RESUME: + dwc3_resume_gadget(dwc); + break; + default: + /* do nothing */ + break; + } + dev_vdbg(dwc->dev, "%s link %d\n", __func__, dwc->link_state); } +static void dwc3_gadget_hibernation_interrupt(struct dwc3 *dwc, + unsigned int evtinfo) +{ + unsigned int is_ss = evtinfo & BIT(4); + + /** + * WORKAROUND: DWC3 revison 2.20a with hibernation support + * have a known issue which can cause USB CV TD.9.23 to fail + * randomly. + * + * Because of this issue, core could generate bogus hibernation + * events which SW needs to ignore. + * + * Refers to: + * + * STAR#9000546576: Device Mode Hibernation: Issue in USB 2.0 + * Device Fallback from SuperSpeed + */ + if (is_ss ^ (dwc->speed == USB_SPEED_SUPER)) + return; + + /* enter hibernation here */ +} + static void dwc3_gadget_interrupt(struct dwc3 *dwc, const struct dwc3_event_devt *event) { @@ -2397,6 +2507,13 @@ static void dwc3_gadget_interrupt(struct dwc3 *dwc, case DWC3_DEVICE_EVENT_WAKEUP: dwc3_gadget_wakeup_interrupt(dwc); break; + case DWC3_DEVICE_EVENT_HIBER_REQ: + if (dev_WARN_ONCE(dwc->dev, !dwc->has_hibernation, + "unexpected hibernation event\n")) + break; + + dwc3_gadget_hibernation_interrupt(dwc, event->event_info); + break; case DWC3_DEVICE_EVENT_LINK_STATUS_CHANGE: dwc3_gadget_linksts_change_interrupt(dwc, event->event_info); break; @@ -2661,8 +2778,10 @@ void dwc3_gadget_exit(struct dwc3 *dwc) int dwc3_gadget_prepare(struct dwc3 *dwc) { - if (dwc->pullups_connected) + if (dwc->pullups_connected) { dwc3_gadget_disable_irq(dwc); + dwc3_gadget_run_stop(dwc, true, true); + } return 0; } @@ -2671,7 +2790,7 @@ void dwc3_gadget_complete(struct dwc3 *dwc) { if (dwc->pullups_connected) { dwc3_gadget_enable_irq(dwc); - dwc3_gadget_run_stop(dwc, true); + dwc3_gadget_run_stop(dwc, true, false); } } @@ -2694,12 +2813,14 @@ int dwc3_gadget_resume(struct dwc3 *dwc) dwc3_gadget_ep0_desc.wMaxPacketSize = cpu_to_le16(512); dep = dwc->eps[0]; - ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL, false); + ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL, false, + false); if (ret) goto err0; dep = dwc->eps[1]; - ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL, false); + ret = __dwc3_gadget_ep_enable(dep, &dwc3_gadget_ep0_desc, NULL, false, + false); if (ret) goto err1; diff --git a/drivers/usb/dwc3/gadget.h b/drivers/usb/dwc3/gadget.h index febe1aa..a0ee75b 100644 --- a/drivers/usb/dwc3/gadget.h +++ b/drivers/usb/dwc3/gadget.h @@ -56,12 +56,6 @@ struct dwc3; /* DEPXFERCFG parameter 0 */ #define DWC3_DEPXFERCFG_NUM_XFER_RES(n) ((n) & 0xffff) -struct dwc3_gadget_ep_cmd_params { - u32 param2; - u32 param1; - u32 param0; -}; - /* -------------------------------------------------------------------------- */ #define to_dwc3_request(r) (container_of(r, struct dwc3_request, request)) @@ -85,9 +79,6 @@ static inline void dwc3_gadget_move_request_queued(struct dwc3_request *req) void dwc3_gadget_giveback(struct dwc3_ep *dep, struct dwc3_request *req, int status); -int dwc3_gadget_set_test_mode(struct dwc3 *dwc, int mode); -int dwc3_gadget_set_link_state(struct dwc3 *dwc, enum dwc3_link_state state); - void dwc3_ep0_interrupt(struct dwc3 *dwc, const struct dwc3_event_depevt *event); void dwc3_ep0_out_start(struct dwc3 *dwc); @@ -95,9 +86,6 @@ int dwc3_gadget_ep0_set_halt(struct usb_ep *ep, int value); int dwc3_gadget_ep0_queue(struct usb_ep *ep, struct usb_request *request, gfp_t gfp_flags); int __dwc3_gadget_ep_set_halt(struct dwc3_ep *dep, int value); -int dwc3_send_gadget_ep_cmd(struct dwc3 *dwc, unsigned ep, - unsigned cmd, struct dwc3_gadget_ep_cmd_params *params); -int dwc3_send_gadget_generic_command(struct dwc3 *dwc, int cmd, u32 param); /** * dwc3_gadget_ep_get_transfer_index - Gets transfer index from HW diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index 8154165..3557c7e 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -226,7 +226,7 @@ config USB_GR_UDC config USB_OMAP tristate "OMAP USB Device Controller" depends on ARCH_OMAP1 - select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_H4_OTG + select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3 help Many Texas Instruments OMAP processors have flexible full speed USB device controllers, with support for up to 30 @@ -301,7 +301,6 @@ config USB_PXA27X gadget drivers to also be dynamically linked. config USB_S3C_HSOTG - depends on ARM tristate "Designware/S3C HS/OtG USB Device controller" help The Designware USB2.0 high-speed gadget controller diff --git a/drivers/usb/gadget/at91_udc.c b/drivers/usb/gadget/at91_udc.c index cea8c20..f605ad8 100644 --- a/drivers/usb/gadget/at91_udc.c +++ b/drivers/usb/gadget/at91_udc.c @@ -1758,15 +1758,15 @@ static int at91udc_probe(struct platform_device *pdev) /* newer chips have more FIFO memory than rm9200 */ if (cpu_is_at91sam9260() || cpu_is_at91sam9g20()) { - usb_ep_set_maxpacket_limit(&udc->ep[0].ep, 64); - usb_ep_set_maxpacket_limit(&udc->ep[3].ep, 64); - usb_ep_set_maxpacket_limit(&udc->ep[4].ep, 512); - usb_ep_set_maxpacket_limit(&udc->ep[5].ep, 512); + udc->ep[0].maxpacket = 64; + udc->ep[3].maxpacket = 64; + udc->ep[4].maxpacket = 512; + udc->ep[5].maxpacket = 512; } else if (cpu_is_at91sam9261() || cpu_is_at91sam9g10()) { - usb_ep_set_maxpacket_limit(&udc->ep[3].ep, 64); + udc->ep[3].maxpacket = 64; } else if (cpu_is_at91sam9263()) { - usb_ep_set_maxpacket_limit(&udc->ep[0].ep, 64); - usb_ep_set_maxpacket_limit(&udc->ep[3].ep, 64); + udc->ep[0].maxpacket = 64; + udc->ep[3].maxpacket = 64; } udc->udp_baseaddr = ioremap(res->start, resource_size(res)); diff --git a/drivers/usb/gadget/atmel_usba_udc.c b/drivers/usb/gadget/atmel_usba_udc.c index 52771d4..9f65324 100644 --- a/drivers/usb/gadget/atmel_usba_udc.c +++ b/drivers/usb/gadget/atmel_usba_udc.c @@ -1661,7 +1661,7 @@ static irqreturn_t usba_udc_irq(int irq, void *devid) if (dma_status) { int i; - for (i = 1; i < USBA_NR_ENDPOINTS; i++) + for (i = 1; i < USBA_NR_DMAS; i++) if (dma_status & (1 << i)) usba_dma_irq(udc, &udc->usba_ep[i]); } @@ -1670,7 +1670,7 @@ static irqreturn_t usba_udc_irq(int irq, void *devid) if (ep_status) { int i; - for (i = 0; i < USBA_NR_ENDPOINTS; i++) + for (i = 0; i < udc->num_ep; i++) if (ep_status & (1 << i)) { if (ep_is_control(&udc->usba_ep[i])) usba_control_irq(udc, &udc->usba_ep[i]); @@ -1827,12 +1827,12 @@ static int atmel_usba_stop(struct usb_gadget *gadget, toggle_bias(0); usba_writel(udc, CTRL, USBA_DISABLE_MASK); - udc->driver = NULL; - clk_disable_unprepare(udc->hclk); clk_disable_unprepare(udc->pclk); - DBG(DBG_GADGET, "unregistered driver `%s'\n", driver->driver.name); + DBG(DBG_GADGET, "unregistered driver `%s'\n", udc->driver->driver.name); + + udc->driver = NULL; return 0; } @@ -1914,6 +1914,12 @@ static struct usba_ep * atmel_udc_of_init(struct platform_device *pdev, i++; } + if (i == 0) { + dev_err(&pdev->dev, "of_probe: no endpoint specified\n"); + ret = -EINVAL; + goto err; + } + return eps; err: return ERR_PTR(ret); diff --git a/drivers/usb/gadget/atmel_usba_udc.h b/drivers/usb/gadget/atmel_usba_udc.h index 2922db5..a70706e 100644 --- a/drivers/usb/gadget/atmel_usba_udc.h +++ b/drivers/usb/gadget/atmel_usba_udc.h @@ -210,7 +210,7 @@ #define USBA_FIFO_BASE(x) ((x) << 16) /* Synth parameters */ -#define USBA_NR_ENDPOINTS 7 +#define USBA_NR_DMAS 7 #define EP0_FIFO_SIZE 64 #define EP0_EPT_SIZE USBA_EPT_SIZE_64 diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c index d742bed..fab9064 100644 --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -1139,7 +1139,7 @@ struct usb_string *usb_gstrings_attach(struct usb_composite_dev *cdev, uc = copy_gadget_strings(sp, n_gstrings, n_strings); if (IS_ERR(uc)) - return ERR_PTR(PTR_ERR(uc)); + return ERR_CAST(uc); n_gs = get_containers_gs(uc); ret = usb_string_ids_tab(cdev, n_gs[0]->strings); diff --git a/drivers/usb/gadget/f_fs.c b/drivers/usb/gadget/f_fs.c index 2b43343..2e164dc 100644 --- a/drivers/usb/gadget/f_fs.c +++ b/drivers/usb/gadget/f_fs.c @@ -28,6 +28,10 @@ #include <linux/usb/composite.h> #include <linux/usb/functionfs.h> +#include <linux/aio.h> +#include <linux/mmu_context.h> +#include <linux/poll.h> + #include "u_fs.h" #include "configfs.h" @@ -99,6 +103,14 @@ static struct ffs_function *ffs_func_from_usb(struct usb_function *f) } +static inline enum ffs_setup_state +ffs_setup_state_clear_cancelled(struct ffs_data *ffs) +{ + return (enum ffs_setup_state) + cmpxchg(&ffs->setup_state, FFS_SETUP_CANCELLED, FFS_NO_SETUP); +} + + static void ffs_func_eps_disable(struct ffs_function *func); static int __must_check ffs_func_eps_enable(struct ffs_function *func); @@ -122,8 +134,8 @@ struct ffs_ep { struct usb_ep *ep; /* P: ffs->eps_lock */ struct usb_request *req; /* P: epfile->mutex */ - /* [0]: full speed, [1]: high speed */ - struct usb_endpoint_descriptor *descs[2]; + /* [0]: full speed, [1]: high speed, [2]: super speed */ + struct usb_endpoint_descriptor *descs[3]; u8 num; @@ -148,6 +160,25 @@ struct ffs_epfile { unsigned char _pad; }; +/* ffs_io_data structure ***************************************************/ + +struct ffs_io_data { + bool aio; + bool read; + + struct kiocb *kiocb; + const struct iovec *iovec; + unsigned long nr_segs; + char __user *buf; + size_t len; + + struct mm_struct *mm; + struct work_struct work; + + struct usb_ep *ep; + struct usb_request *req; +}; + static int __must_check ffs_epfiles_create(struct ffs_data *ffs); static void ffs_epfiles_destroy(struct ffs_epfile *epfiles, unsigned count); @@ -161,8 +192,10 @@ ffs_sb_create_file(struct super_block *sb, const char *name, void *data, DEFINE_MUTEX(ffs_lock); EXPORT_SYMBOL(ffs_lock); -static struct ffs_dev *ffs_find_dev(const char *name); +static struct ffs_dev *_ffs_find_dev(const char *name); +static struct ffs_dev *_ffs_alloc_dev(void); static int _ffs_name_dev(struct ffs_dev *dev, const char *name); +static void _ffs_free_dev(struct ffs_dev *dev); static void *ffs_acquire_dev(const char *dev_name); static void ffs_release_dev(struct ffs_data *ffs_data); static int ffs_ready(struct ffs_data *ffs); @@ -218,7 +251,7 @@ static int __ffs_ep0_queue_wait(struct ffs_data *ffs, char *data, size_t len) } ffs->setup_state = FFS_NO_SETUP; - return ffs->ep0req_status; + return req->status ? req->status : req->actual; } static int __ffs_ep0_stall(struct ffs_data *ffs) @@ -244,7 +277,7 @@ static ssize_t ffs_ep0_write(struct file *file, const char __user *buf, ENTER(); /* Fast check if setup was canceled */ - if (FFS_SETUP_STATE(ffs) == FFS_SETUP_CANCELED) + if (ffs_setup_state_clear_cancelled(ffs) == FFS_SETUP_CANCELLED) return -EIDRM; /* Acquire mutex */ @@ -310,8 +343,8 @@ static ssize_t ffs_ep0_write(struct file *file, const char __user *buf, * rather then _irqsave */ spin_lock_irq(&ffs->ev.waitq.lock); - switch (FFS_SETUP_STATE(ffs)) { - case FFS_SETUP_CANCELED: + switch (ffs_setup_state_clear_cancelled(ffs)) { + case FFS_SETUP_CANCELLED: ret = -EIDRM; goto done_spin; @@ -346,7 +379,7 @@ static ssize_t ffs_ep0_write(struct file *file, const char __user *buf, /* * We are guaranteed to be still in FFS_ACTIVE state * but the state of setup could have changed from - * FFS_SETUP_PENDING to FFS_SETUP_CANCELED so we need + * FFS_SETUP_PENDING to FFS_SETUP_CANCELLED so we need * to check for that. If that happened we copied data * from user space in vain but it's unlikely. * @@ -355,7 +388,8 @@ static ssize_t ffs_ep0_write(struct file *file, const char __user *buf, * transition can be performed and it's protected by * mutex. */ - if (FFS_SETUP_STATE(ffs) == FFS_SETUP_CANCELED) { + if (ffs_setup_state_clear_cancelled(ffs) == + FFS_SETUP_CANCELLED) { ret = -EIDRM; done_spin: spin_unlock_irq(&ffs->ev.waitq.lock); @@ -421,7 +455,7 @@ static ssize_t ffs_ep0_read(struct file *file, char __user *buf, ENTER(); /* Fast check if setup was canceled */ - if (FFS_SETUP_STATE(ffs) == FFS_SETUP_CANCELED) + if (ffs_setup_state_clear_cancelled(ffs) == FFS_SETUP_CANCELLED) return -EIDRM; /* Acquire mutex */ @@ -441,8 +475,8 @@ static ssize_t ffs_ep0_read(struct file *file, char __user *buf, */ spin_lock_irq(&ffs->ev.waitq.lock); - switch (FFS_SETUP_STATE(ffs)) { - case FFS_SETUP_CANCELED: + switch (ffs_setup_state_clear_cancelled(ffs)) { + case FFS_SETUP_CANCELLED: ret = -EIDRM; break; @@ -489,7 +523,8 @@ static ssize_t ffs_ep0_read(struct file *file, char __user *buf, spin_lock_irq(&ffs->ev.waitq.lock); /* See ffs_ep0_write() */ - if (FFS_SETUP_STATE(ffs) == FFS_SETUP_CANCELED) { + if (ffs_setup_state_clear_cancelled(ffs) == + FFS_SETUP_CANCELLED) { ret = -EIDRM; break; } @@ -558,6 +593,45 @@ static long ffs_ep0_ioctl(struct file *file, unsigned code, unsigned long value) return ret; } +static unsigned int ffs_ep0_poll(struct file *file, poll_table *wait) +{ + struct ffs_data *ffs = file->private_data; + unsigned int mask = POLLWRNORM; + int ret; + + poll_wait(file, &ffs->ev.waitq, wait); + + ret = ffs_mutex_lock(&ffs->mutex, file->f_flags & O_NONBLOCK); + if (unlikely(ret < 0)) + return mask; + + switch (ffs->state) { + case FFS_READ_DESCRIPTORS: + case FFS_READ_STRINGS: + mask |= POLLOUT; + break; + + case FFS_ACTIVE: + switch (ffs->setup_state) { + case FFS_NO_SETUP: + if (ffs->ev.count) + mask |= POLLIN; + break; + + case FFS_SETUP_PENDING: + case FFS_SETUP_CANCELLED: + mask |= (POLLIN | POLLOUT); + break; + } + case FFS_CLOSING: + break; + } + + mutex_unlock(&ffs->mutex); + + return mask; +} + static const struct file_operations ffs_ep0_operations = { .llseek = no_llseek, @@ -566,6 +640,7 @@ static const struct file_operations ffs_ep0_operations = { .read = ffs_ep0_read, .release = ffs_ep0_release, .unlocked_ioctl = ffs_ep0_ioctl, + .poll = ffs_ep0_poll, }; @@ -581,8 +656,52 @@ static void ffs_epfile_io_complete(struct usb_ep *_ep, struct usb_request *req) } } -static ssize_t ffs_epfile_io(struct file *file, - char __user *buf, size_t len, int read) +static void ffs_user_copy_worker(struct work_struct *work) +{ + struct ffs_io_data *io_data = container_of(work, struct ffs_io_data, + work); + int ret = io_data->req->status ? io_data->req->status : + io_data->req->actual; + + if (io_data->read && ret > 0) { + int i; + size_t pos = 0; + use_mm(io_data->mm); + for (i = 0; i < io_data->nr_segs; i++) { + if (unlikely(copy_to_user(io_data->iovec[i].iov_base, + &io_data->buf[pos], + io_data->iovec[i].iov_len))) { + ret = -EFAULT; + break; + } + pos += io_data->iovec[i].iov_len; + } + unuse_mm(io_data->mm); + } + + aio_complete(io_data->kiocb, ret, ret); + + usb_ep_free_request(io_data->ep, io_data->req); + + io_data->kiocb->private = NULL; + if (io_data->read) + kfree(io_data->iovec); + kfree(io_data->buf); + kfree(io_data); +} + +static void ffs_epfile_async_io_complete(struct usb_ep *_ep, + struct usb_request *req) +{ + struct ffs_io_data *io_data = req->context; + + ENTER(); + + INIT_WORK(&io_data->work, ffs_user_copy_worker); + schedule_work(&io_data->work); +} + +static ssize_t ffs_epfile_io(struct file *file, struct ffs_io_data *io_data) { struct ffs_epfile *epfile = file->private_data; struct ffs_ep *ep; @@ -612,7 +731,7 @@ static ssize_t ffs_epfile_io(struct file *file, } /* Do we halt? */ - halt = !read == !epfile->in; + halt = (!io_data->read == !epfile->in); if (halt && epfile->isoc) { ret = -EINVAL; goto error; @@ -630,15 +749,32 @@ static ssize_t ffs_epfile_io(struct file *file, * Controller may require buffer size to be aligned to * maxpacketsize of an out endpoint. */ - data_len = read ? usb_ep_align_maybe(gadget, ep->ep, len) : len; + data_len = io_data->read ? + usb_ep_align_maybe(gadget, ep->ep, io_data->len) : + io_data->len; data = kmalloc(data_len, GFP_KERNEL); if (unlikely(!data)) return -ENOMEM; - - if (!read && unlikely(copy_from_user(data, buf, len))) { - ret = -EFAULT; - goto error; + if (io_data->aio && !io_data->read) { + int i; + size_t pos = 0; + for (i = 0; i < io_data->nr_segs; i++) { + if (unlikely(copy_from_user(&data[pos], + io_data->iovec[i].iov_base, + io_data->iovec[i].iov_len))) { + ret = -EFAULT; + goto error; + } + pos += io_data->iovec[i].iov_len; + } + } else { + if (!io_data->read && + unlikely(__copy_from_user(data, io_data->buf, + io_data->len))) { + ret = -EFAULT; + goto error; + } } } @@ -661,40 +797,78 @@ static ssize_t ffs_epfile_io(struct file *file, ret = -EBADMSG; } else { /* Fire the request */ - DECLARE_COMPLETION_ONSTACK(done); + struct usb_request *req; - struct usb_request *req = ep->req; - req->context = &done; - req->complete = ffs_epfile_io_complete; - req->buf = data; - req->length = data_len; + if (io_data->aio) { + req = usb_ep_alloc_request(ep->ep, GFP_KERNEL); + if (unlikely(!req)) + goto error_lock; - ret = usb_ep_queue(ep->ep, req, GFP_ATOMIC); + req->buf = data; + req->length = io_data->len; - spin_unlock_irq(&epfile->ffs->eps_lock); + io_data->buf = data; + io_data->ep = ep->ep; + io_data->req = req; - if (unlikely(ret < 0)) { - /* nop */ - } else if (unlikely(wait_for_completion_interruptible(&done))) { - ret = -EINTR; - usb_ep_dequeue(ep->ep, req); + req->context = io_data; + req->complete = ffs_epfile_async_io_complete; + + ret = usb_ep_queue(ep->ep, req, GFP_ATOMIC); + if (unlikely(ret)) { + usb_ep_free_request(ep->ep, req); + goto error_lock; + } + ret = -EIOCBQUEUED; + + spin_unlock_irq(&epfile->ffs->eps_lock); } else { - /* - * XXX We may end up silently droping data here. - * Since data_len (i.e. req->length) may be bigger - * than len (after being rounded up to maxpacketsize), - * we may end up with more data then user space has - * space for. - */ - ret = ep->status; - if (read && ret > 0 && - unlikely(copy_to_user(buf, data, - min_t(size_t, ret, len)))) - ret = -EFAULT; + DECLARE_COMPLETION_ONSTACK(done); + + req = ep->req; + req->buf = data; + req->length = io_data->len; + + req->context = &done; + req->complete = ffs_epfile_io_complete; + + ret = usb_ep_queue(ep->ep, req, GFP_ATOMIC); + + spin_unlock_irq(&epfile->ffs->eps_lock); + + if (unlikely(ret < 0)) { + /* nop */ + } else if (unlikely( + wait_for_completion_interruptible(&done))) { + ret = -EINTR; + usb_ep_dequeue(ep->ep, req); + } else { + /* + * XXX We may end up silently droping data + * here. Since data_len (i.e. req->length) may + * be bigger than len (after being rounded up + * to maxpacketsize), we may end up with more + * data then user space has space for. + */ + ret = ep->status; + if (io_data->read && ret > 0) { + ret = min_t(size_t, ret, io_data->len); + + if (unlikely(copy_to_user(io_data->buf, + data, ret))) + ret = -EFAULT; + } + } + kfree(data); } } mutex_unlock(&epfile->mutex); + return ret; + +error_lock: + spin_unlock_irq(&epfile->ffs->eps_lock); + mutex_unlock(&epfile->mutex); error: kfree(data); return ret; @@ -704,17 +878,31 @@ static ssize_t ffs_epfile_write(struct file *file, const char __user *buf, size_t len, loff_t *ptr) { + struct ffs_io_data io_data; + ENTER(); - return ffs_epfile_io(file, (char __user *)buf, len, 0); + io_data.aio = false; + io_data.read = false; + io_data.buf = (char * __user)buf; + io_data.len = len; + + return ffs_epfile_io(file, &io_data); } static ssize_t ffs_epfile_read(struct file *file, char __user *buf, size_t len, loff_t *ptr) { + struct ffs_io_data io_data; + ENTER(); - return ffs_epfile_io(file, buf, len, 1); + io_data.aio = false; + io_data.read = true; + io_data.buf = buf; + io_data.len = len; + + return ffs_epfile_io(file, &io_data); } static int @@ -733,6 +921,89 @@ ffs_epfile_open(struct inode *inode, struct file *file) return 0; } +static int ffs_aio_cancel(struct kiocb *kiocb) +{ + struct ffs_io_data *io_data = kiocb->private; + struct ffs_epfile *epfile = kiocb->ki_filp->private_data; + int value; + + ENTER(); + + spin_lock_irq(&epfile->ffs->eps_lock); + + if (likely(io_data && io_data->ep && io_data->req)) + value = usb_ep_dequeue(io_data->ep, io_data->req); + else + value = -EINVAL; + + spin_unlock_irq(&epfile->ffs->eps_lock); + + return value; +} + +static ssize_t ffs_epfile_aio_write(struct kiocb *kiocb, + const struct iovec *iovec, + unsigned long nr_segs, loff_t loff) +{ + struct ffs_io_data *io_data; + + ENTER(); + + io_data = kmalloc(sizeof(*io_data), GFP_KERNEL); + if (unlikely(!io_data)) + return -ENOMEM; + + io_data->aio = true; + io_data->read = false; + io_data->kiocb = kiocb; + io_data->iovec = iovec; + io_data->nr_segs = nr_segs; + io_data->len = kiocb->ki_nbytes; + io_data->mm = current->mm; + + kiocb->private = io_data; + + kiocb_set_cancel_fn(kiocb, ffs_aio_cancel); + + return ffs_epfile_io(kiocb->ki_filp, io_data); +} + +static ssize_t ffs_epfile_aio_read(struct kiocb *kiocb, + const struct iovec *iovec, + unsigned long nr_segs, loff_t loff) +{ + struct ffs_io_data *io_data; + struct iovec *iovec_copy; + + ENTER(); + + iovec_copy = kmalloc_array(nr_segs, sizeof(*iovec_copy), GFP_KERNEL); + if (unlikely(!iovec_copy)) + return -ENOMEM; + + memcpy(iovec_copy, iovec, sizeof(struct iovec)*nr_segs); + + io_data = kmalloc(sizeof(*io_data), GFP_KERNEL); + if (unlikely(!io_data)) { + kfree(iovec_copy); + return -ENOMEM; + } + + io_data->aio = true; + io_data->read = true; + io_data->kiocb = kiocb; + io_data->iovec = iovec_copy; + io_data->nr_segs = nr_segs; + io_data->len = kiocb->ki_nbytes; + io_data->mm = current->mm; + + kiocb->private = io_data; + + kiocb_set_cancel_fn(kiocb, ffs_aio_cancel); + + return ffs_epfile_io(kiocb->ki_filp, io_data); +} + static int ffs_epfile_release(struct inode *inode, struct file *file) { @@ -789,6 +1060,8 @@ static const struct file_operations ffs_epfile_operations = { .open = ffs_epfile_open, .write = ffs_epfile_write, .read = ffs_epfile_read, + .aio_write = ffs_epfile_aio_write, + .aio_read = ffs_epfile_aio_read, .release = ffs_epfile_release, .unlocked_ioctl = ffs_epfile_ioctl, }; @@ -1172,7 +1445,7 @@ static void ffs_data_clear(struct ffs_data *ffs) if (ffs->epfiles) ffs_epfiles_destroy(ffs->epfiles, ffs->eps_count); - kfree(ffs->raw_descs); + kfree(ffs->raw_descs_data); kfree(ffs->raw_strings); kfree(ffs->stringtabs); } @@ -1184,14 +1457,15 @@ static void ffs_data_reset(struct ffs_data *ffs) ffs_data_clear(ffs); ffs->epfiles = NULL; + ffs->raw_descs_data = NULL; ffs->raw_descs = NULL; ffs->raw_strings = NULL; ffs->stringtabs = NULL; ffs->raw_descs_length = 0; - ffs->raw_fs_descs_length = 0; ffs->fs_descs_count = 0; ffs->hs_descs_count = 0; + ffs->ss_descs_count = 0; ffs->strings_count = 0; ffs->interfaces_count = 0; @@ -1334,7 +1608,24 @@ static int ffs_func_eps_enable(struct ffs_function *func) spin_lock_irqsave(&func->ffs->eps_lock, flags); do { struct usb_endpoint_descriptor *ds; - ds = ep->descs[ep->descs[1] ? 1 : 0]; + int desc_idx; + + if (ffs->gadget->speed == USB_SPEED_SUPER) + desc_idx = 2; + else if (ffs->gadget->speed == USB_SPEED_HIGH) + desc_idx = 1; + else + desc_idx = 0; + + /* fall-back to lower speed if desc missing for current speed */ + do { + ds = ep->descs[desc_idx]; + } while (!ds && --desc_idx >= 0); + + if (!ds) { + ret = -EINVAL; + break; + } ep->ep->driver_data = ep; ep->ep->desc = ds; @@ -1469,6 +1760,12 @@ static int __must_check ffs_do_desc(char *data, unsigned len, } break; + case USB_DT_SS_ENDPOINT_COMP: + pr_vdebug("EP SS companion descriptor\n"); + if (length != sizeof(struct usb_ss_ep_comp_descriptor)) + goto inv_length; + break; + case USB_DT_OTHER_SPEED_CONFIG: case USB_DT_INTERFACE_POWER: case USB_DT_DEBUG: @@ -1579,60 +1876,76 @@ static int __ffs_data_do_entity(enum ffs_entity_type type, static int __ffs_data_got_descs(struct ffs_data *ffs, char *const _data, size_t len) { - unsigned fs_count, hs_count; - int fs_len, ret = -EINVAL; - char *data = _data; + char *data = _data, *raw_descs; + unsigned counts[3], flags; + int ret = -EINVAL, i; ENTER(); - if (unlikely(get_unaligned_le32(data) != FUNCTIONFS_DESCRIPTORS_MAGIC || - get_unaligned_le32(data + 4) != len)) + if (get_unaligned_le32(data + 4) != len) goto error; - fs_count = get_unaligned_le32(data + 8); - hs_count = get_unaligned_le32(data + 12); - if (!fs_count && !hs_count) - goto einval; - - data += 16; - len -= 16; - - if (likely(fs_count)) { - fs_len = ffs_do_descs(fs_count, data, len, - __ffs_data_do_entity, ffs); - if (unlikely(fs_len < 0)) { - ret = fs_len; + switch (get_unaligned_le32(data)) { + case FUNCTIONFS_DESCRIPTORS_MAGIC: + flags = FUNCTIONFS_HAS_FS_DESC | FUNCTIONFS_HAS_HS_DESC; + data += 8; + len -= 8; + break; + case FUNCTIONFS_DESCRIPTORS_MAGIC_V2: + flags = get_unaligned_le32(data + 8); + if (flags & ~(FUNCTIONFS_HAS_FS_DESC | + FUNCTIONFS_HAS_HS_DESC | + FUNCTIONFS_HAS_SS_DESC)) { + ret = -ENOSYS; goto error; } + data += 12; + len -= 12; + break; + default: + goto error; + } - data += fs_len; - len -= fs_len; - } else { - fs_len = 0; + /* Read fs_count, hs_count and ss_count (if present) */ + for (i = 0; i < 3; ++i) { + if (!(flags & (1 << i))) { + counts[i] = 0; + } else if (len < 4) { + goto error; + } else { + counts[i] = get_unaligned_le32(data); + data += 4; + len -= 4; + } } - if (likely(hs_count)) { - ret = ffs_do_descs(hs_count, data, len, + /* Read descriptors */ + raw_descs = data; + for (i = 0; i < 3; ++i) { + if (!counts[i]) + continue; + ret = ffs_do_descs(counts[i], data, len, __ffs_data_do_entity, ffs); - if (unlikely(ret < 0)) + if (ret < 0) goto error; - } else { - ret = 0; + data += ret; + len -= ret; } - if (unlikely(len != ret)) - goto einval; + if (raw_descs == data || len) { + ret = -EINVAL; + goto error; + } - ffs->raw_fs_descs_length = fs_len; - ffs->raw_descs_length = fs_len + ret; - ffs->raw_descs = _data; - ffs->fs_descs_count = fs_count; - ffs->hs_descs_count = hs_count; + ffs->raw_descs_data = _data; + ffs->raw_descs = raw_descs; + ffs->raw_descs_length = data - raw_descs; + ffs->fs_descs_count = counts[0]; + ffs->hs_descs_count = counts[1]; + ffs->ss_descs_count = counts[2]; return 0; -einval: - ret = -EINVAL; error: kfree(_data); return ret; @@ -1789,7 +2102,7 @@ static void __ffs_event_add(struct ffs_data *ffs, * the source does nothing. */ if (ffs->setup_state == FFS_SETUP_PENDING) - ffs->setup_state = FFS_SETUP_CANCELED; + ffs->setup_state = FFS_SETUP_CANCELLED; switch (type) { case FUNCTIONFS_RESUME: @@ -1850,21 +2163,28 @@ static int __ffs_func_bind_do_descs(enum ffs_entity_type type, u8 *valuep, struct usb_endpoint_descriptor *ds = (void *)desc; struct ffs_function *func = priv; struct ffs_ep *ffs_ep; - - /* - * If hs_descriptors is not NULL then we are reading hs - * descriptors now - */ - const int isHS = func->function.hs_descriptors != NULL; - unsigned idx; + unsigned ep_desc_id, idx; + static const char *speed_names[] = { "full", "high", "super" }; if (type != FFS_DESCRIPTOR) return 0; - if (isHS) + /* + * If ss_descriptors is not NULL, we are reading super speed + * descriptors; if hs_descriptors is not NULL, we are reading high + * speed descriptors; otherwise, we are reading full speed + * descriptors. + */ + if (func->function.ss_descriptors) { + ep_desc_id = 2; + func->function.ss_descriptors[(long)valuep] = desc; + } else if (func->function.hs_descriptors) { + ep_desc_id = 1; func->function.hs_descriptors[(long)valuep] = desc; - else + } else { + ep_desc_id = 0; func->function.fs_descriptors[(long)valuep] = desc; + } if (!desc || desc->bDescriptorType != USB_DT_ENDPOINT) return 0; @@ -1872,13 +2192,13 @@ static int __ffs_func_bind_do_descs(enum ffs_entity_type type, u8 *valuep, idx = (ds->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK) - 1; ffs_ep = func->eps + idx; - if (unlikely(ffs_ep->descs[isHS])) { - pr_vdebug("two %sspeed descriptors for EP %d\n", - isHS ? "high" : "full", + if (unlikely(ffs_ep->descs[ep_desc_id])) { + pr_err("two %sspeed descriptors for EP %d\n", + speed_names[ep_desc_id], ds->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK); return -EINVAL; } - ffs_ep->descs[isHS] = ds; + ffs_ep->descs[ep_desc_id] = ds; ffs_dump_mem(": Original ep desc", ds, ds->bLength); if (ffs_ep->ep) { @@ -2022,8 +2342,10 @@ static int _ffs_func_bind(struct usb_configuration *c, const int full = !!func->ffs->fs_descs_count; const int high = gadget_is_dualspeed(func->gadget) && func->ffs->hs_descs_count; + const int super = gadget_is_superspeed(func->gadget) && + func->ffs->ss_descs_count; - int ret; + int fs_len, hs_len, ret; /* Make it a single chunk, less management later on */ vla_group(d); @@ -2032,15 +2354,16 @@ static int _ffs_func_bind(struct usb_configuration *c, full ? ffs->fs_descs_count + 1 : 0); vla_item_with_sz(d, struct usb_descriptor_header *, hs_descs, high ? ffs->hs_descs_count + 1 : 0); + vla_item_with_sz(d, struct usb_descriptor_header *, ss_descs, + super ? ffs->ss_descs_count + 1 : 0); vla_item_with_sz(d, short, inums, ffs->interfaces_count); - vla_item_with_sz(d, char, raw_descs, - high ? ffs->raw_descs_length : ffs->raw_fs_descs_length); + vla_item_with_sz(d, char, raw_descs, ffs->raw_descs_length); char *vlabuf; ENTER(); - /* Only high speed but not supported by gadget? */ - if (unlikely(!(full | high))) + /* Has descriptors only for speeds gadget does not support */ + if (unlikely(!(full | high | super))) return -ENOTSUPP; /* Allocate a single chunk, less management later on */ @@ -2050,8 +2373,10 @@ static int _ffs_func_bind(struct usb_configuration *c, /* Zero */ memset(vla_ptr(vlabuf, d, eps), 0, d_eps__sz); - memcpy(vla_ptr(vlabuf, d, raw_descs), ffs->raw_descs + 16, - d_raw_descs__sz); + /* Copy descriptors */ + memcpy(vla_ptr(vlabuf, d, raw_descs), ffs->raw_descs, + ffs->raw_descs_length); + memset(vla_ptr(vlabuf, d, inums), 0xff, d_inums__sz); for (ret = ffs->eps_count; ret; --ret) { struct ffs_ep *ptr; @@ -2073,22 +2398,38 @@ static int _ffs_func_bind(struct usb_configuration *c, */ if (likely(full)) { func->function.fs_descriptors = vla_ptr(vlabuf, d, fs_descs); - ret = ffs_do_descs(ffs->fs_descs_count, - vla_ptr(vlabuf, d, raw_descs), - d_raw_descs__sz, - __ffs_func_bind_do_descs, func); - if (unlikely(ret < 0)) + fs_len = ffs_do_descs(ffs->fs_descs_count, + vla_ptr(vlabuf, d, raw_descs), + d_raw_descs__sz, + __ffs_func_bind_do_descs, func); + if (unlikely(fs_len < 0)) { + ret = fs_len; goto error; + } } else { - ret = 0; + fs_len = 0; } if (likely(high)) { func->function.hs_descriptors = vla_ptr(vlabuf, d, hs_descs); - ret = ffs_do_descs(ffs->hs_descs_count, - vla_ptr(vlabuf, d, raw_descs) + ret, - d_raw_descs__sz - ret, - __ffs_func_bind_do_descs, func); + hs_len = ffs_do_descs(ffs->hs_descs_count, + vla_ptr(vlabuf, d, raw_descs) + fs_len, + d_raw_descs__sz - fs_len, + __ffs_func_bind_do_descs, func); + if (unlikely(hs_len < 0)) { + ret = hs_len; + goto error; + } + } else { + hs_len = 0; + } + + if (likely(super)) { + func->function.ss_descriptors = vla_ptr(vlabuf, d, ss_descs); + ret = ffs_do_descs(ffs->ss_descs_count, + vla_ptr(vlabuf, d, raw_descs) + fs_len + hs_len, + d_raw_descs__sz - fs_len - hs_len, + __ffs_func_bind_do_descs, func); if (unlikely(ret < 0)) goto error; } @@ -2099,7 +2440,8 @@ static int _ffs_func_bind(struct usb_configuration *c, * now. */ ret = ffs_do_descs(ffs->fs_descs_count + - (high ? ffs->hs_descs_count : 0), + (high ? ffs->hs_descs_count : 0) + + (super ? ffs->ss_descs_count : 0), vla_ptr(vlabuf, d, raw_descs), d_raw_descs__sz, __ffs_func_bind_do_nums, func); if (unlikely(ret < 0)) @@ -2258,7 +2600,7 @@ static int ffs_func_revmap_intf(struct ffs_function *func, u8 intf) static LIST_HEAD(ffs_devices); -static struct ffs_dev *_ffs_find_dev(const char *name) +static struct ffs_dev *_ffs_do_find_dev(const char *name) { struct ffs_dev *dev; @@ -2275,7 +2617,7 @@ static struct ffs_dev *_ffs_find_dev(const char *name) /* * ffs_lock must be taken by the caller of this function */ -static struct ffs_dev *ffs_get_single_dev(void) +static struct ffs_dev *_ffs_get_single_dev(void) { struct ffs_dev *dev; @@ -2291,15 +2633,15 @@ static struct ffs_dev *ffs_get_single_dev(void) /* * ffs_lock must be taken by the caller of this function */ -static struct ffs_dev *ffs_find_dev(const char *name) +static struct ffs_dev *_ffs_find_dev(const char *name) { struct ffs_dev *dev; - dev = ffs_get_single_dev(); + dev = _ffs_get_single_dev(); if (dev) return dev; - return _ffs_find_dev(name); + return _ffs_do_find_dev(name); } /* Configfs support *********************************************************/ @@ -2335,7 +2677,7 @@ static void ffs_free_inst(struct usb_function_instance *f) opts = to_f_fs_opts(f); ffs_dev_lock(); - ffs_free_dev(opts->dev); + _ffs_free_dev(opts->dev); ffs_dev_unlock(); kfree(opts); } @@ -2390,7 +2732,7 @@ static struct usb_function_instance *ffs_alloc_inst(void) opts->func_inst.set_inst_name = ffs_set_inst_name; opts->func_inst.free_func_inst = ffs_free_inst; ffs_dev_lock(); - dev = ffs_alloc_dev(); + dev = _ffs_alloc_dev(); ffs_dev_unlock(); if (IS_ERR(dev)) { kfree(opts); @@ -2446,6 +2788,7 @@ static void ffs_func_unbind(struct usb_configuration *c, */ func->function.fs_descriptors = NULL; func->function.hs_descriptors = NULL; + func->function.ss_descriptors = NULL; func->interfaces_nums = NULL; ffs_event_add(ffs, FUNCTIONFS_UNBIND); @@ -2478,12 +2821,12 @@ static struct usb_function *ffs_alloc(struct usb_function_instance *fi) /* * ffs_lock must be taken by the caller of this function */ -struct ffs_dev *ffs_alloc_dev(void) +static struct ffs_dev *_ffs_alloc_dev(void) { struct ffs_dev *dev; int ret; - if (ffs_get_single_dev()) + if (_ffs_get_single_dev()) return ERR_PTR(-EBUSY); dev = kzalloc(sizeof(*dev), GFP_KERNEL); @@ -2511,10 +2854,10 @@ static int _ffs_name_dev(struct ffs_dev *dev, const char *name) { struct ffs_dev *existing; - existing = _ffs_find_dev(name); + existing = _ffs_do_find_dev(name); if (existing) return -EBUSY; - + dev->name = name; return 0; @@ -2555,7 +2898,7 @@ EXPORT_SYMBOL(ffs_single_dev); /* * ffs_lock must be taken by the caller of this function */ -void ffs_free_dev(struct ffs_dev *dev) +static void _ffs_free_dev(struct ffs_dev *dev) { list_del(&dev->entry); if (dev->name_allocated) @@ -2572,7 +2915,7 @@ static void *ffs_acquire_dev(const char *dev_name) ENTER(); ffs_dev_lock(); - ffs_dev = ffs_find_dev(dev_name); + ffs_dev = _ffs_find_dev(dev_name); if (!ffs_dev) ffs_dev = ERR_PTR(-ENODEV); else if (ffs_dev->mounted) @@ -2595,11 +2938,12 @@ static void ffs_release_dev(struct ffs_data *ffs_data) ffs_dev_lock(); ffs_dev = ffs_data->private_data; - if (ffs_dev) + if (ffs_dev) { ffs_dev->mounted = false; - - if (ffs_dev->ffs_release_dev_callback) - ffs_dev->ffs_release_dev_callback(ffs_dev); + + if (ffs_dev->ffs_release_dev_callback) + ffs_dev->ffs_release_dev_callback(ffs_dev); + } ffs_dev_unlock(); } diff --git a/drivers/usb/gadget/f_subset.c b/drivers/usb/gadget/f_subset.c index f1a5919..df4a0dcb 100644 --- a/drivers/usb/gadget/f_subset.c +++ b/drivers/usb/gadget/f_subset.c @@ -276,7 +276,7 @@ static int geth_set_alt(struct usb_function *f, unsigned intf, unsigned alt) } net = gether_connect(&geth->port); - return IS_ERR(net) ? PTR_ERR(net) : 0; + return PTR_RET(net); } static void geth_disable(struct usb_function *f) diff --git a/drivers/usb/gadget/gr_udc.c b/drivers/usb/gadget/gr_udc.c index 914cbd8..f984ee7 100644 --- a/drivers/usb/gadget/gr_udc.c +++ b/drivers/usb/gadget/gr_udc.c @@ -225,14 +225,8 @@ static void gr_dfs_create(struct gr_udc *dev) const char *name = "gr_udc_state"; dev->dfs_root = debugfs_create_dir(dev_name(dev->dev), NULL); - if (IS_ERR(dev->dfs_root)) { - dev_err(dev->dev, "Failed to create debugfs directory\n"); - return; - } - dev->dfs_state = debugfs_create_file(name, 0444, dev->dfs_root, - dev, &gr_dfs_fops); - if (IS_ERR(dev->dfs_state)) - dev_err(dev->dev, "Failed to create debugfs file %s\n", name); + dev->dfs_state = debugfs_create_file(name, 0444, dev->dfs_root, dev, + &gr_dfs_fops); } static void gr_dfs_delete(struct gr_udc *dev) diff --git a/drivers/usb/gadget/inode.c b/drivers/usb/gadget/inode.c index b94c049..b5be6f03 100644 --- a/drivers/usb/gadget/inode.c +++ b/drivers/usb/gadget/inode.c @@ -439,11 +439,9 @@ ep_write (struct file *fd, const char __user *buf, size_t len, loff_t *ptr) /* FIXME writebehind for O_NONBLOCK and poll(), qlen = 1 */ value = -ENOMEM; - kbuf = kmalloc (len, GFP_KERNEL); - if (!kbuf) - goto free1; - if (copy_from_user (kbuf, buf, len)) { - value = -EFAULT; + kbuf = memdup_user(buf, len); + if (!kbuf) { + value = PTR_ERR(kbuf); goto free1; } @@ -452,7 +450,6 @@ ep_write (struct file *fd, const char __user *buf, size_t len, loff_t *ptr) data->name, len, (int) value); free1: mutex_unlock(&data->lock); - kfree (kbuf); return value; } diff --git a/drivers/usb/gadget/lpc32xx_udc.c b/drivers/usb/gadget/lpc32xx_udc.c index 049ebab..a139894 100644 --- a/drivers/usb/gadget/lpc32xx_udc.c +++ b/drivers/usb/gadget/lpc32xx_udc.c @@ -3295,9 +3295,9 @@ usb_clk_enable_fail: pll_set_fail: clk_disable(udc->usb_pll_clk); pll_enable_fail: - clk_put(udc->usb_slv_clk); -usb_otg_clk_get_fail: clk_put(udc->usb_otg_clk); +usb_otg_clk_get_fail: + clk_put(udc->usb_slv_clk); usb_clk_get_fail: clk_put(udc->usb_pll_clk); pll_get_fail: diff --git a/drivers/usb/gadget/printer.c b/drivers/usb/gadget/printer.c index 69b76ef..6474081 100644 --- a/drivers/usb/gadget/printer.c +++ b/drivers/usb/gadget/printer.c @@ -427,12 +427,17 @@ setup_rx_reqs(struct printer_dev *dev) req->length = USB_BUFSIZE; req->complete = rx_complete; + /* here, we unlock, and only unlock, to avoid deadlock. */ + spin_unlock(&dev->lock); error = usb_ep_queue(dev->out_ep, req, GFP_ATOMIC); + spin_lock(&dev->lock); if (error) { DBG(dev, "rx submit --> %d\n", error); list_add(&req->list, &dev->rx_reqs); break; - } else { + } + /* if the req is empty, then add it into dev->rx_reqs_active. */ + else if (list_empty(&req->list)) { list_add(&req->list, &dev->rx_reqs_active); } } @@ -1133,6 +1138,7 @@ static int __init printer_bind_config(struct usb_configuration *c) NULL, "g_printer"); if (IS_ERR(dev->pdev)) { ERROR(dev, "Failed to create device: g_printer\n"); + status = PTR_ERR(dev->pdev); goto fail; } diff --git a/drivers/usb/gadget/s3c-hsotg.c b/drivers/usb/gadget/s3c-hsotg.c index 1172eae..2a9cb67 100644 --- a/drivers/usb/gadget/s3c-hsotg.c +++ b/drivers/usb/gadget/s3c-hsotg.c @@ -617,7 +617,7 @@ static int s3c_hsotg_write_fifo(struct s3c_hsotg *hsotg, to_write = DIV_ROUND_UP(to_write, 4); data = hs_req->req.buf + buf_pos; - writesl(hsotg->regs + EPFIFO(hs_ep->index), data, to_write); + iowrite32_rep(hsotg->regs + EPFIFO(hs_ep->index), data, to_write); return (to_write >= can_write) ? -ENOSPC : 0; } @@ -720,8 +720,8 @@ static void s3c_hsotg_start_req(struct s3c_hsotg *hsotg, ureq->length, ureq->actual); if (0) dev_dbg(hsotg->dev, - "REQ buf %p len %d dma 0x%08x noi=%d zp=%d snok=%d\n", - ureq->buf, length, ureq->dma, + "REQ buf %p len %d dma 0x%pad noi=%d zp=%d snok=%d\n", + ureq->buf, length, &ureq->dma, ureq->no_interrupt, ureq->zero, ureq->short_not_ok); maxreq = get_ep_limit(hs_ep); @@ -789,8 +789,8 @@ static void s3c_hsotg_start_req(struct s3c_hsotg *hsotg, dma_reg = dir_in ? DIEPDMA(index) : DOEPDMA(index); writel(ureq->dma, hsotg->regs + dma_reg); - dev_dbg(hsotg->dev, "%s: 0x%08x => 0x%08x\n", - __func__, ureq->dma, dma_reg); + dev_dbg(hsotg->dev, "%s: 0x%pad => 0x%08x\n", + __func__, &ureq->dma, dma_reg); } ctrl |= DxEPCTL_EPEna; /* ensure ep enabled */ @@ -1186,6 +1186,41 @@ static void s3c_hsotg_enqueue_setup(struct s3c_hsotg *hsotg); static void s3c_hsotg_disconnect(struct s3c_hsotg *hsotg); /** + * s3c_hsotg_stall_ep0 - stall ep0 + * @hsotg: The device state + * + * Set stall for ep0 as response for setup request. + */ +static void s3c_hsotg_stall_ep0(struct s3c_hsotg *hsotg) { + struct s3c_hsotg_ep *ep0 = &hsotg->eps[0]; + u32 reg; + u32 ctrl; + + dev_dbg(hsotg->dev, "ep0 stall (dir=%d)\n", ep0->dir_in); + reg = (ep0->dir_in) ? DIEPCTL0 : DOEPCTL0; + + /* + * DxEPCTL_Stall will be cleared by EP once it has + * taken effect, so no need to clear later. + */ + + ctrl = readl(hsotg->regs + reg); + ctrl |= DxEPCTL_Stall; + ctrl |= DxEPCTL_CNAK; + writel(ctrl, hsotg->regs + reg); + + dev_dbg(hsotg->dev, + "written DxEPCTL=0x%08x to %08x (DxEPCTL=0x%08x)\n", + ctrl, reg, readl(hsotg->regs + reg)); + + /* + * complete won't be called, so we enqueue + * setup request here + */ + s3c_hsotg_enqueue_setup(hsotg); +} + +/** * s3c_hsotg_process_control - process a control request * @hsotg: The device state * @ctrl: The control request received @@ -1262,38 +1297,8 @@ static void s3c_hsotg_process_control(struct s3c_hsotg *hsotg, * so respond with a STALL for the status stage to indicate failure. */ - if (ret < 0) { - u32 reg; - u32 ctrl; - - dev_dbg(hsotg->dev, "ep0 stall (dir=%d)\n", ep0->dir_in); - reg = (ep0->dir_in) ? DIEPCTL0 : DOEPCTL0; - - /* - * DxEPCTL_Stall will be cleared by EP once it has - * taken effect, so no need to clear later. - */ - - ctrl = readl(hsotg->regs + reg); - ctrl |= DxEPCTL_Stall; - ctrl |= DxEPCTL_CNAK; - writel(ctrl, hsotg->regs + reg); - - dev_dbg(hsotg->dev, - "written DxEPCTL=0x%08x to %08x (DxEPCTL=0x%08x)\n", - ctrl, reg, readl(hsotg->regs + reg)); - - /* - * don't believe we need to anything more to get the EP - * to reply with a STALL packet - */ - - /* - * complete won't be called, so we enqueue - * setup request here - */ - s3c_hsotg_enqueue_setup(hsotg); - } + if (ret < 0) + s3c_hsotg_stall_ep0(hsotg); } /** @@ -1488,7 +1493,7 @@ static void s3c_hsotg_rx_data(struct s3c_hsotg *hsotg, int ep_idx, int size) * note, we might over-write the buffer end by 3 bytes depending on * alignment of the data. */ - readsl(fifo, hs_req->req.buf + read_ptr, to_read); + ioread32_rep(fifo, hs_req->req.buf + read_ptr, to_read); } /** @@ -2832,6 +2837,15 @@ static int s3c_hsotg_ep_sethalt(struct usb_ep *ep, int value) dev_info(hs->dev, "%s(ep %p %s, %d)\n", __func__, ep, ep->name, value); + if (index == 0) { + if (value) + s3c_hsotg_stall_ep0(hs); + else + dev_warn(hs->dev, + "%s: can't clear halt on ep0\n", __func__); + return 0; + } + /* write both IN and OUT control registers */ epreg = DIEPCTL(index); @@ -3760,10 +3774,55 @@ static int s3c_hsotg_remove(struct platform_device *pdev) return 0; } -#if 1 -#define s3c_hsotg_suspend NULL -#define s3c_hsotg_resume NULL -#endif +static int s3c_hsotg_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct s3c_hsotg *hsotg = platform_get_drvdata(pdev); + unsigned long flags; + int ret = 0; + + if (hsotg->driver) + dev_info(hsotg->dev, "suspending usb gadget %s\n", + hsotg->driver->driver.name); + + spin_lock_irqsave(&hsotg->lock, flags); + s3c_hsotg_disconnect(hsotg); + s3c_hsotg_phy_disable(hsotg); + hsotg->gadget.speed = USB_SPEED_UNKNOWN; + spin_unlock_irqrestore(&hsotg->lock, flags); + + if (hsotg->driver) { + int ep; + for (ep = 0; ep < hsotg->num_of_eps; ep++) + s3c_hsotg_ep_disable(&hsotg->eps[ep].ep); + + ret = regulator_bulk_disable(ARRAY_SIZE(hsotg->supplies), + hsotg->supplies); + } + + return ret; +} + +static int s3c_hsotg_resume(struct platform_device *pdev) +{ + struct s3c_hsotg *hsotg = platform_get_drvdata(pdev); + unsigned long flags; + int ret = 0; + + if (hsotg->driver) { + dev_info(hsotg->dev, "resuming usb gadget %s\n", + hsotg->driver->driver.name); + ret = regulator_bulk_enable(ARRAY_SIZE(hsotg->supplies), + hsotg->supplies); + } + + spin_lock_irqsave(&hsotg->lock, flags); + hsotg->last_rst = jiffies; + s3c_hsotg_phy_enable(hsotg); + s3c_hsotg_core_init(hsotg); + spin_unlock_irqrestore(&hsotg->lock, flags); + + return ret; +} #ifdef CONFIG_OF static const struct of_device_id s3c_hsotg_of_ids[] = { diff --git a/drivers/usb/gadget/s3c-hsudc.c b/drivers/usb/gadget/s3c-hsudc.c index ea4bbfe..10c6a12 100644 --- a/drivers/usb/gadget/s3c-hsudc.c +++ b/drivers/usb/gadget/s3c-hsudc.c @@ -1344,7 +1344,6 @@ static int s3c_hsudc_probe(struct platform_device *pdev) return 0; err_add_udc: -err_add_device: clk_disable(hsudc->uclk); err_res: if (!IS_ERR_OR_NULL(hsudc->transceiver)) diff --git a/drivers/usb/gadget/tcm_usb_gadget.c b/drivers/usb/gadget/tcm_usb_gadget.c index 0f8aad7..460c266 100644 --- a/drivers/usb/gadget/tcm_usb_gadget.c +++ b/drivers/usb/gadget/tcm_usb_gadget.c @@ -1613,7 +1613,7 @@ static struct se_wwn *usbg_make_tport( return ERR_PTR(-ENOMEM); } tport->tport_wwpn = wwpn; - snprintf(tport->tport_name, sizeof(tport->tport_name), wnn_name); + snprintf(tport->tport_name, sizeof(tport->tport_name), "%s", wnn_name); return &tport->tport_wwn; } diff --git a/drivers/usb/gadget/u_ether.c b/drivers/usb/gadget/u_ether.c index b7d4f82..50d09c2 100644 --- a/drivers/usb/gadget/u_ether.c +++ b/drivers/usb/gadget/u_ether.c @@ -48,6 +48,8 @@ #define UETH__VERSION "29-May-2008" +#define GETHER_NAPI_WEIGHT 32 + struct eth_dev { /* lock is held while accessing port_usb */ @@ -72,6 +74,7 @@ struct eth_dev { struct sk_buff_head *list); struct work_struct work; + struct napi_struct rx_napi; unsigned long todo; #define WORK_RX_MEMORY 0 @@ -253,18 +256,16 @@ enomem: DBG(dev, "rx submit --> %d\n", retval); if (skb) dev_kfree_skb_any(skb); - spin_lock_irqsave(&dev->req_lock, flags); - list_add(&req->list, &dev->rx_reqs); - spin_unlock_irqrestore(&dev->req_lock, flags); } return retval; } static void rx_complete(struct usb_ep *ep, struct usb_request *req) { - struct sk_buff *skb = req->context, *skb2; + struct sk_buff *skb = req->context; struct eth_dev *dev = ep->driver_data; int status = req->status; + bool rx_queue = 0; switch (status) { @@ -288,30 +289,8 @@ static void rx_complete(struct usb_ep *ep, struct usb_request *req) } else { skb_queue_tail(&dev->rx_frames, skb); } - skb = NULL; - - skb2 = skb_dequeue(&dev->rx_frames); - while (skb2) { - if (status < 0 - || ETH_HLEN > skb2->len - || skb2->len > VLAN_ETH_FRAME_LEN) { - dev->net->stats.rx_errors++; - dev->net->stats.rx_length_errors++; - DBG(dev, "rx length %d\n", skb2->len); - dev_kfree_skb_any(skb2); - goto next_frame; - } - skb2->protocol = eth_type_trans(skb2, dev->net); - dev->net->stats.rx_packets++; - dev->net->stats.rx_bytes += skb2->len; - - /* no buffer copies needed, unless hardware can't - * use skb buffers. - */ - status = netif_rx(skb2); -next_frame: - skb2 = skb_dequeue(&dev->rx_frames); - } + if (!status) + rx_queue = 1; break; /* software-driven interface shutdown */ @@ -334,22 +313,20 @@ quiesce: /* FALLTHROUGH */ default: + rx_queue = 1; + dev_kfree_skb_any(skb); dev->net->stats.rx_errors++; DBG(dev, "rx status %d\n", status); break; } - if (skb) - dev_kfree_skb_any(skb); - if (!netif_running(dev->net)) { clean: spin_lock(&dev->req_lock); list_add(&req->list, &dev->rx_reqs); spin_unlock(&dev->req_lock); - req = NULL; - } - if (req) - rx_submit(dev, req, GFP_ATOMIC); + + if (rx_queue && likely(napi_schedule_prep(&dev->rx_napi))) + __napi_schedule(&dev->rx_napi); } static int prealloc(struct list_head *list, struct usb_ep *ep, unsigned n) @@ -414,16 +391,24 @@ static void rx_fill(struct eth_dev *dev, gfp_t gfp_flags) { struct usb_request *req; unsigned long flags; + int rx_counts = 0; /* fill unused rxq slots with some skb */ spin_lock_irqsave(&dev->req_lock, flags); while (!list_empty(&dev->rx_reqs)) { + + if (++rx_counts > qlen(dev->gadget, dev->qmult)) + break; + req = container_of(dev->rx_reqs.next, struct usb_request, list); list_del_init(&req->list); spin_unlock_irqrestore(&dev->req_lock, flags); if (rx_submit(dev, req, gfp_flags) < 0) { + spin_lock_irqsave(&dev->req_lock, flags); + list_add(&req->list, &dev->rx_reqs); + spin_unlock_irqrestore(&dev->req_lock, flags); defer_kevent(dev, WORK_RX_MEMORY); return; } @@ -433,6 +418,41 @@ static void rx_fill(struct eth_dev *dev, gfp_t gfp_flags) spin_unlock_irqrestore(&dev->req_lock, flags); } +static int gether_poll(struct napi_struct *napi, int budget) +{ + struct eth_dev *dev = container_of(napi, struct eth_dev, rx_napi); + struct sk_buff *skb; + unsigned int work_done = 0; + int status = 0; + + while ((skb = skb_dequeue(&dev->rx_frames))) { + if (status < 0 + || ETH_HLEN > skb->len + || skb->len > VLAN_ETH_FRAME_LEN) { + dev->net->stats.rx_errors++; + dev->net->stats.rx_length_errors++; + DBG(dev, "rx length %d\n", skb->len); + dev_kfree_skb_any(skb); + continue; + } + skb->protocol = eth_type_trans(skb, dev->net); + dev->net->stats.rx_packets++; + dev->net->stats.rx_bytes += skb->len; + + status = netif_rx_ni(skb); + } + + if (netif_running(dev->net)) { + rx_fill(dev, GFP_KERNEL); + work_done++; + } + + if (work_done < budget) + napi_complete(&dev->rx_napi); + + return work_done; +} + static void eth_work(struct work_struct *work) { struct eth_dev *dev = container_of(work, struct eth_dev, work); @@ -625,6 +645,7 @@ static void eth_start(struct eth_dev *dev, gfp_t gfp_flags) /* and open the tx floodgates */ atomic_set(&dev->tx_qlen, 0); netif_wake_queue(dev->net); + napi_enable(&dev->rx_napi); } static int eth_open(struct net_device *net) @@ -651,6 +672,7 @@ static int eth_stop(struct net_device *net) unsigned long flags; VDBG(dev, "%s\n", __func__); + napi_disable(&dev->rx_napi); netif_stop_queue(net); DBG(dev, "stop stats: rx/tx %ld/%ld, errs %ld/%ld\n", @@ -768,6 +790,7 @@ struct eth_dev *gether_setup_name(struct usb_gadget *g, return ERR_PTR(-ENOMEM); dev = netdev_priv(net); + netif_napi_add(net, &dev->rx_napi, gether_poll, GETHER_NAPI_WEIGHT); spin_lock_init(&dev->lock); spin_lock_init(&dev->req_lock); INIT_WORK(&dev->work, eth_work); @@ -830,6 +853,7 @@ struct net_device *gether_setup_name_default(const char *netname) return ERR_PTR(-ENOMEM); dev = netdev_priv(net); + netif_napi_add(net, &dev->rx_napi, gether_poll, GETHER_NAPI_WEIGHT); spin_lock_init(&dev->lock); spin_lock_init(&dev->req_lock); INIT_WORK(&dev->work, eth_work); @@ -1113,6 +1137,7 @@ void gether_disconnect(struct gether *link) { struct eth_dev *dev = link->ioport; struct usb_request *req; + struct sk_buff *skb; WARN_ON(!dev); if (!dev) @@ -1139,6 +1164,12 @@ void gether_disconnect(struct gether *link) spin_lock(&dev->req_lock); } spin_unlock(&dev->req_lock); + + spin_lock(&dev->rx_frames.lock); + while ((skb = __skb_dequeue(&dev->rx_frames))) + dev_kfree_skb_any(skb); + spin_unlock(&dev->rx_frames.lock); + link->in_ep->driver_data = NULL; link->in_ep->desc = NULL; diff --git a/drivers/usb/gadget/u_fs.h b/drivers/usb/gadget/u_fs.h index bc2d371..bf0ba37 100644 --- a/drivers/usb/gadget/u_fs.h +++ b/drivers/usb/gadget/u_fs.h @@ -65,10 +65,8 @@ static inline void ffs_dev_unlock(void) mutex_unlock(&ffs_lock); } -struct ffs_dev *ffs_alloc_dev(void); int ffs_name_dev(struct ffs_dev *dev, const char *name); int ffs_single_dev(struct ffs_dev *dev); -void ffs_free_dev(struct ffs_dev *dev); struct ffs_epfile; struct ffs_function; @@ -125,7 +123,7 @@ enum ffs_setup_state { * setup. If this state is set read/write on ep0 return * -EIDRM. This state is only set when adding event. */ - FFS_SETUP_CANCELED + FFS_SETUP_CANCELLED }; struct ffs_data { @@ -156,7 +154,6 @@ struct ffs_data { */ struct usb_request *ep0req; /* P: mutex */ struct completion ep0req_completion; /* P: mutex */ - int ep0req_status; /* P: mutex */ /* reference counter */ atomic_t ref; @@ -168,19 +165,18 @@ struct ffs_data { /* * Possible transitions: - * + FFS_NO_SETUP -> FFS_SETUP_PENDING -- P: ev.waitq.lock + * + FFS_NO_SETUP -> FFS_SETUP_PENDING -- P: ev.waitq.lock * happens only in ep0 read which is P: mutex - * + FFS_SETUP_PENDING -> FFS_NO_SETUP -- P: ev.waitq.lock + * + FFS_SETUP_PENDING -> FFS_NO_SETUP -- P: ev.waitq.lock * happens only in ep0 i/o which is P: mutex - * + FFS_SETUP_PENDING -> FFS_SETUP_CANCELED -- P: ev.waitq.lock - * + FFS_SETUP_CANCELED -> FFS_NO_SETUP -- cmpxchg + * + FFS_SETUP_PENDING -> FFS_SETUP_CANCELLED -- P: ev.waitq.lock + * + FFS_SETUP_CANCELLED -> FFS_NO_SETUP -- cmpxchg + * + * This field should never be accessed directly and instead + * ffs_setup_state_clear_cancelled function should be used. */ enum ffs_setup_state setup_state; -#define FFS_SETUP_STATE(ffs) \ - ((enum ffs_setup_state)cmpxchg(&(ffs)->setup_state, \ - FFS_SETUP_CANCELED, FFS_NO_SETUP)) - /* Events & such. */ struct { u8 types[4]; @@ -210,16 +206,16 @@ struct ffs_data { /* filled by __ffs_data_got_descs() */ /* - * Real descriptors are 16 bytes after raw_descs (so you need - * to skip 16 bytes (ie. ffs->raw_descs + 16) to get to the - * first full speed descriptor). raw_descs_length and - * raw_fs_descs_length do not have those 16 bytes added. + * raw_descs is what you kfree, real_descs points inside of raw_descs, + * where full speed, high speed and super speed descriptors start. + * real_descs_length is the length of all those descriptors. */ + const void *raw_descs_data; const void *raw_descs; unsigned raw_descs_length; - unsigned raw_fs_descs_length; unsigned fs_descs_count; unsigned hs_descs_count; + unsigned ss_descs_count; unsigned short strings_count; unsigned short interfaces_count; diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index a9707da..e22b826 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -584,7 +584,6 @@ config FHCI_DEBUG config USB_U132_HCD tristate "Elan U132 Adapter Host Controller" depends on USB_FTDI_ELAN - default M help The U132 adapter is a USB to CardBus adapter specifically designed for PC cards that contain an OHCI host controller. Typical PC cards diff --git a/drivers/usb/host/ehci-platform.c b/drivers/usb/host/ehci-platform.c index 01536cf..b3a0e11 100644 --- a/drivers/usb/host/ehci-platform.c +++ b/drivers/usb/host/ehci-platform.c @@ -3,6 +3,7 @@ * * Copyright 2007 Steven Brown <sbrown@cortland.com> * Copyright 2010-2012 Hauke Mehrtens <hauke@hauke-m.de> + * Copyright 2014 Hans de Goede <hdegoede@redhat.com> * * Derived from the ohci-ssb driver * Copyright 2007 Michael Buesch <m@bues.ch> @@ -18,6 +19,7 @@ * * Licensed under the GNU/GPL. See COPYING for details. */ +#include <linux/clk.h> #include <linux/dma-mapping.h> #include <linux/err.h> #include <linux/kernel.h> @@ -25,6 +27,7 @@ #include <linux/io.h> #include <linux/module.h> #include <linux/of.h> +#include <linux/phy/phy.h> #include <linux/platform_device.h> #include <linux/usb.h> #include <linux/usb/hcd.h> @@ -33,6 +36,13 @@ #include "ehci.h" #define DRIVER_DESC "EHCI generic platform driver" +#define EHCI_MAX_CLKS 3 +#define hcd_to_ehci_priv(h) ((struct ehci_platform_priv *)hcd_to_ehci(h)->priv) + +struct ehci_platform_priv { + struct clk *clks[EHCI_MAX_CLKS]; + struct phy *phy; +}; static const char hcd_name[] = "ehci-platform"; @@ -45,8 +55,6 @@ static int ehci_platform_reset(struct usb_hcd *hcd) hcd->has_tt = pdata->has_tt; ehci->has_synopsys_hc_bug = pdata->has_synopsys_hc_bug; - ehci->big_endian_desc = pdata->big_endian_desc; - ehci->big_endian_mmio = pdata->big_endian_mmio; if (pdata->pre_setup) { retval = pdata->pre_setup(hcd); @@ -64,38 +72,91 @@ static int ehci_platform_reset(struct usb_hcd *hcd) return 0; } +static int ehci_platform_power_on(struct platform_device *dev) +{ + struct usb_hcd *hcd = platform_get_drvdata(dev); + struct ehci_platform_priv *priv = hcd_to_ehci_priv(hcd); + int clk, ret; + + for (clk = 0; clk < EHCI_MAX_CLKS && priv->clks[clk]; clk++) { + ret = clk_prepare_enable(priv->clks[clk]); + if (ret) + goto err_disable_clks; + } + + if (priv->phy) { + ret = phy_init(priv->phy); + if (ret) + goto err_disable_clks; + + ret = phy_power_on(priv->phy); + if (ret) + goto err_exit_phy; + } + + return 0; + +err_exit_phy: + phy_exit(priv->phy); +err_disable_clks: + while (--clk >= 0) + clk_disable_unprepare(priv->clks[clk]); + + return ret; +} + +static void ehci_platform_power_off(struct platform_device *dev) +{ + struct usb_hcd *hcd = platform_get_drvdata(dev); + struct ehci_platform_priv *priv = hcd_to_ehci_priv(hcd); + int clk; + + if (priv->phy) { + phy_power_off(priv->phy); + phy_exit(priv->phy); + } + + for (clk = EHCI_MAX_CLKS - 1; clk >= 0; clk--) + if (priv->clks[clk]) + clk_disable_unprepare(priv->clks[clk]); +} + static struct hc_driver __read_mostly ehci_platform_hc_driver; static const struct ehci_driver_overrides platform_overrides __initconst = { - .reset = ehci_platform_reset, + .reset = ehci_platform_reset, + .extra_priv_size = sizeof(struct ehci_platform_priv), }; -static struct usb_ehci_pdata ehci_platform_defaults; +static struct usb_ehci_pdata ehci_platform_defaults = { + .power_on = ehci_platform_power_on, + .power_suspend = ehci_platform_power_off, + .power_off = ehci_platform_power_off, +}; static int ehci_platform_probe(struct platform_device *dev) { struct usb_hcd *hcd; struct resource *res_mem; - struct usb_ehci_pdata *pdata; - int irq; - int err; + struct usb_ehci_pdata *pdata = dev_get_platdata(&dev->dev); + struct ehci_platform_priv *priv; + struct ehci_hcd *ehci; + int err, irq, clk = 0; if (usb_disabled()) return -ENODEV; /* - * use reasonable defaults so platforms don't have to provide these. - * with DT probing on ARM, none of these are set. + * Use reasonable defaults so platforms don't have to provide these + * with DT probing on ARM. */ - if (!dev_get_platdata(&dev->dev)) - dev->dev.platform_data = &ehci_platform_defaults; + if (!pdata) + pdata = &ehci_platform_defaults; err = dma_coerce_mask_and_coherent(&dev->dev, DMA_BIT_MASK(32)); if (err) return err; - pdata = dev_get_platdata(&dev->dev); - irq = platform_get_irq(dev, 0); if (irq < 0) { dev_err(&dev->dev, "no irq provided"); @@ -107,17 +168,72 @@ static int ehci_platform_probe(struct platform_device *dev) return -ENXIO; } + hcd = usb_create_hcd(&ehci_platform_hc_driver, &dev->dev, + dev_name(&dev->dev)); + if (!hcd) + return -ENOMEM; + + platform_set_drvdata(dev, hcd); + dev->dev.platform_data = pdata; + priv = hcd_to_ehci_priv(hcd); + ehci = hcd_to_ehci(hcd); + + if (pdata == &ehci_platform_defaults && dev->dev.of_node) { + if (of_property_read_bool(dev->dev.of_node, "big-endian-regs")) + ehci->big_endian_mmio = 1; + + if (of_property_read_bool(dev->dev.of_node, "big-endian-desc")) + ehci->big_endian_desc = 1; + + if (of_property_read_bool(dev->dev.of_node, "big-endian")) + ehci->big_endian_mmio = ehci->big_endian_desc = 1; + + priv->phy = devm_phy_get(&dev->dev, "usb"); + if (IS_ERR(priv->phy)) { + err = PTR_ERR(priv->phy); + if (err == -EPROBE_DEFER) + goto err_put_hcd; + priv->phy = NULL; + } + + for (clk = 0; clk < EHCI_MAX_CLKS; clk++) { + priv->clks[clk] = of_clk_get(dev->dev.of_node, clk); + if (IS_ERR(priv->clks[clk])) { + err = PTR_ERR(priv->clks[clk]); + if (err == -EPROBE_DEFER) + goto err_put_clks; + priv->clks[clk] = NULL; + break; + } + } + } + + if (pdata->big_endian_desc) + ehci->big_endian_desc = 1; + if (pdata->big_endian_mmio) + ehci->big_endian_mmio = 1; + +#ifndef CONFIG_USB_EHCI_BIG_ENDIAN_MMIO + if (ehci->big_endian_mmio) { + dev_err(&dev->dev, + "Error: CONFIG_USB_EHCI_BIG_ENDIAN_MMIO not set\n"); + err = -EINVAL; + goto err_put_clks; + } +#endif +#ifndef CONFIG_USB_EHCI_BIG_ENDIAN_DESC + if (ehci->big_endian_desc) { + dev_err(&dev->dev, + "Error: CONFIG_USB_EHCI_BIG_ENDIAN_DESC not set\n"); + err = -EINVAL; + goto err_put_clks; + } +#endif + if (pdata->power_on) { err = pdata->power_on(dev); if (err < 0) - return err; - } - - hcd = usb_create_hcd(&ehci_platform_hc_driver, &dev->dev, - dev_name(&dev->dev)); - if (!hcd) { - err = -ENOMEM; - goto err_power; + goto err_put_clks; } hcd->rsrc_start = res_mem->start; @@ -126,22 +242,28 @@ static int ehci_platform_probe(struct platform_device *dev) hcd->regs = devm_ioremap_resource(&dev->dev, res_mem); if (IS_ERR(hcd->regs)) { err = PTR_ERR(hcd->regs); - goto err_put_hcd; + goto err_power; } err = usb_add_hcd(hcd, irq, IRQF_SHARED); if (err) - goto err_put_hcd; + goto err_power; device_wakeup_enable(hcd->self.controller); platform_set_drvdata(dev, hcd); return err; -err_put_hcd: - usb_put_hcd(hcd); err_power: if (pdata->power_off) pdata->power_off(dev); +err_put_clks: + while (--clk >= 0) + clk_put(priv->clks[clk]); +err_put_hcd: + if (pdata == &ehci_platform_defaults) + dev->dev.platform_data = NULL; + + usb_put_hcd(hcd); return err; } @@ -150,13 +272,19 @@ static int ehci_platform_remove(struct platform_device *dev) { struct usb_hcd *hcd = platform_get_drvdata(dev); struct usb_ehci_pdata *pdata = dev_get_platdata(&dev->dev); + struct ehci_platform_priv *priv = hcd_to_ehci_priv(hcd); + int clk; usb_remove_hcd(hcd); - usb_put_hcd(hcd); if (pdata->power_off) pdata->power_off(dev); + for (clk = 0; clk < EHCI_MAX_CLKS && priv->clks[clk]; clk++) + clk_put(priv->clks[clk]); + + usb_put_hcd(hcd); + if (pdata == &ehci_platform_defaults) dev->dev.platform_data = NULL; @@ -207,8 +335,10 @@ static int ehci_platform_resume(struct device *dev) static const struct of_device_id vt8500_ehci_ids[] = { { .compatible = "via,vt8500-ehci", }, { .compatible = "wm,prizm-ehci", }, + { .compatible = "generic-ehci", }, {} }; +MODULE_DEVICE_TABLE(of, vt8500_ehci_ids); static const struct platform_device_id ehci_platform_table[] = { { "ehci-platform", 0 }, diff --git a/drivers/usb/host/ehci-tegra.c b/drivers/usb/host/ehci-tegra.c index af28b74..27ac6ad 100644 --- a/drivers/usb/host/ehci-tegra.c +++ b/drivers/usb/host/ehci-tegra.c @@ -38,10 +38,6 @@ #include "ehci.h" -#define TEGRA_USB_BASE 0xC5000000 -#define TEGRA_USB2_BASE 0xC5004000 -#define TEGRA_USB3_BASE 0xC5008000 - #define PORT_WAKE_BITS (PORT_WKOC_E|PORT_WKDISC_E|PORT_WKCONN_E) #define TEGRA_USB_DMA_ALIGN 32 diff --git a/drivers/usb/host/hwa-hc.c b/drivers/usb/host/hwa-hc.c index e076699..d0d8fad 100644 --- a/drivers/usb/host/hwa-hc.c +++ b/drivers/usb/host/hwa-hc.c @@ -261,8 +261,44 @@ static int __hwahc_op_wusbhc_start(struct wusbhc *wusbhc) dev_err(dev, "cannot listen to notifications: %d\n", result); goto error_stop; } + /* + * If WUSB_QUIRK_ALEREON_HWA_DISABLE_XFER_NOTIFICATIONS is set, + * disable transfer notifications. + */ + if (hwahc->wa.quirks & + WUSB_QUIRK_ALEREON_HWA_DISABLE_XFER_NOTIFICATIONS) { + struct usb_host_interface *cur_altsetting = + hwahc->wa.usb_iface->cur_altsetting; + + result = usb_control_msg(hwahc->wa.usb_dev, + usb_sndctrlpipe(hwahc->wa.usb_dev, 0), + WA_REQ_ALEREON_DISABLE_XFER_NOTIFICATIONS, + USB_DIR_OUT | USB_TYPE_VENDOR | + USB_RECIP_INTERFACE, + WA_REQ_ALEREON_FEATURE_SET, + cur_altsetting->desc.bInterfaceNumber, + NULL, 0, + USB_CTRL_SET_TIMEOUT); + /* + * If we successfully sent the control message, start DTI here + * because no transfer notifications will be received which is + * where DTI is normally started. + */ + if (result == 0) + result = wa_dti_start(&hwahc->wa); + else + result = 0; /* OK. Continue normally. */ + + if (result < 0) { + dev_err(dev, "cannot start DTI: %d\n", result); + goto error_dti_start; + } + } + return result; +error_dti_start: + wa_nep_disarm(&hwahc->wa); error_stop: __wa_clear_feature(&hwahc->wa, WA_ENABLE); return result; @@ -827,10 +863,12 @@ static void hwahc_disconnect(struct usb_interface *usb_iface) static struct usb_device_id hwahc_id_table[] = { /* Alereon 5310 */ { USB_DEVICE_AND_INTERFACE_INFO(0x13dc, 0x5310, 0xe0, 0x02, 0x01), - .driver_info = WUSB_QUIRK_ALEREON_HWA_CONCAT_ISOC }, + .driver_info = WUSB_QUIRK_ALEREON_HWA_CONCAT_ISOC | + WUSB_QUIRK_ALEREON_HWA_DISABLE_XFER_NOTIFICATIONS }, /* Alereon 5611 */ { USB_DEVICE_AND_INTERFACE_INFO(0x13dc, 0x5611, 0xe0, 0x02, 0x01), - .driver_info = WUSB_QUIRK_ALEREON_HWA_CONCAT_ISOC }, + .driver_info = WUSB_QUIRK_ALEREON_HWA_CONCAT_ISOC | + WUSB_QUIRK_ALEREON_HWA_DISABLE_XFER_NOTIFICATIONS }, /* FIXME: use class labels for this */ { USB_INTERFACE_INFO(0xe0, 0x02, 0x01), }, {}, diff --git a/drivers/usb/host/ohci-platform.c b/drivers/usb/host/ohci-platform.c index 68f674c..b6002c9 100644 --- a/drivers/usb/host/ohci-platform.c +++ b/drivers/usb/host/ohci-platform.c @@ -3,6 +3,7 @@ * * Copyright 2007 Michael Buesch <m@bues.ch> * Copyright 2011-2012 Hauke Mehrtens <hauke@hauke-m.de> + * Copyright 2014 Hans de Goede <hdegoede@redhat.com> * * Derived from the OCHI-SSB driver * Derived from the OHCI-PCI driver @@ -14,11 +15,14 @@ * Licensed under the GNU/GPL. See COPYING for details. */ +#include <linux/clk.h> +#include <linux/dma-mapping.h> #include <linux/hrtimer.h> #include <linux/io.h> #include <linux/kernel.h> #include <linux/module.h> #include <linux/err.h> +#include <linux/phy/phy.h> #include <linux/platform_device.h> #include <linux/usb/ohci_pdriver.h> #include <linux/usb.h> @@ -27,6 +31,13 @@ #include "ohci.h" #define DRIVER_DESC "OHCI generic platform driver" +#define OHCI_MAX_CLKS 3 +#define hcd_to_ohci_priv(h) ((struct ohci_platform_priv *)hcd_to_ohci(h)->priv) + +struct ohci_platform_priv { + struct clk *clks[OHCI_MAX_CLKS]; + struct phy *phy; +}; static const char hcd_name[] = "ohci-platform"; @@ -36,10 +47,6 @@ static int ohci_platform_reset(struct usb_hcd *hcd) struct usb_ohci_pdata *pdata = dev_get_platdata(&pdev->dev); struct ohci_hcd *ohci = hcd_to_ohci(hcd); - if (pdata->big_endian_desc) - ohci->flags |= OHCI_QUIRK_BE_DESC; - if (pdata->big_endian_mmio) - ohci->flags |= OHCI_QUIRK_BE_MMIO; if (pdata->no_big_frame_no) ohci->flags |= OHCI_QUIRK_FRAME_NO; if (pdata->num_ports) @@ -48,11 +55,67 @@ static int ohci_platform_reset(struct usb_hcd *hcd) return ohci_setup(hcd); } +static int ohci_platform_power_on(struct platform_device *dev) +{ + struct usb_hcd *hcd = platform_get_drvdata(dev); + struct ohci_platform_priv *priv = hcd_to_ohci_priv(hcd); + int clk, ret; + + for (clk = 0; clk < OHCI_MAX_CLKS && priv->clks[clk]; clk++) { + ret = clk_prepare_enable(priv->clks[clk]); + if (ret) + goto err_disable_clks; + } + + if (priv->phy) { + ret = phy_init(priv->phy); + if (ret) + goto err_disable_clks; + + ret = phy_power_on(priv->phy); + if (ret) + goto err_exit_phy; + } + + return 0; + +err_exit_phy: + phy_exit(priv->phy); +err_disable_clks: + while (--clk >= 0) + clk_disable_unprepare(priv->clks[clk]); + + return ret; +} + +static void ohci_platform_power_off(struct platform_device *dev) +{ + struct usb_hcd *hcd = platform_get_drvdata(dev); + struct ohci_platform_priv *priv = hcd_to_ohci_priv(hcd); + int clk; + + if (priv->phy) { + phy_power_off(priv->phy); + phy_exit(priv->phy); + } + + for (clk = OHCI_MAX_CLKS - 1; clk >= 0; clk--) + if (priv->clks[clk]) + clk_disable_unprepare(priv->clks[clk]); +} + static struct hc_driver __read_mostly ohci_platform_hc_driver; static const struct ohci_driver_overrides platform_overrides __initconst = { - .product_desc = "Generic Platform OHCI controller", - .reset = ohci_platform_reset, + .product_desc = "Generic Platform OHCI controller", + .reset = ohci_platform_reset, + .extra_priv_size = sizeof(struct ohci_platform_priv), +}; + +static struct usb_ohci_pdata ohci_platform_defaults = { + .power_on = ohci_platform_power_on, + .power_suspend = ohci_platform_power_off, + .power_off = ohci_platform_power_off, }; static int ohci_platform_probe(struct platform_device *dev) @@ -60,17 +123,24 @@ static int ohci_platform_probe(struct platform_device *dev) struct usb_hcd *hcd; struct resource *res_mem; struct usb_ohci_pdata *pdata = dev_get_platdata(&dev->dev); - int irq; - int err = -ENOMEM; - - if (!pdata) { - WARN_ON(1); - return -ENODEV; - } + struct ohci_platform_priv *priv; + struct ohci_hcd *ohci; + int err, irq, clk = 0; if (usb_disabled()) return -ENODEV; + /* + * Use reasonable defaults so platforms don't have to provide these + * with DT probing on ARM. + */ + if (!pdata) + pdata = &ohci_platform_defaults; + + err = dma_coerce_mask_and_coherent(&dev->dev, DMA_BIT_MASK(32)); + if (err) + return err; + irq = platform_get_irq(dev, 0); if (irq < 0) { dev_err(&dev->dev, "no irq provided"); @@ -83,17 +153,72 @@ static int ohci_platform_probe(struct platform_device *dev) return -ENXIO; } + hcd = usb_create_hcd(&ohci_platform_hc_driver, &dev->dev, + dev_name(&dev->dev)); + if (!hcd) + return -ENOMEM; + + platform_set_drvdata(dev, hcd); + dev->dev.platform_data = pdata; + priv = hcd_to_ohci_priv(hcd); + ohci = hcd_to_ohci(hcd); + + if (pdata == &ohci_platform_defaults && dev->dev.of_node) { + if (of_property_read_bool(dev->dev.of_node, "big-endian-regs")) + ohci->flags |= OHCI_QUIRK_BE_MMIO; + + if (of_property_read_bool(dev->dev.of_node, "big-endian-desc")) + ohci->flags |= OHCI_QUIRK_BE_DESC; + + if (of_property_read_bool(dev->dev.of_node, "big-endian")) + ohci->flags |= OHCI_QUIRK_BE_MMIO | OHCI_QUIRK_BE_DESC; + + priv->phy = devm_phy_get(&dev->dev, "usb"); + if (IS_ERR(priv->phy)) { + err = PTR_ERR(priv->phy); + if (err == -EPROBE_DEFER) + goto err_put_hcd; + priv->phy = NULL; + } + + for (clk = 0; clk < OHCI_MAX_CLKS; clk++) { + priv->clks[clk] = of_clk_get(dev->dev.of_node, clk); + if (IS_ERR(priv->clks[clk])) { + err = PTR_ERR(priv->clks[clk]); + if (err == -EPROBE_DEFER) + goto err_put_clks; + priv->clks[clk] = NULL; + break; + } + } + } + + if (pdata->big_endian_desc) + ohci->flags |= OHCI_QUIRK_BE_DESC; + if (pdata->big_endian_mmio) + ohci->flags |= OHCI_QUIRK_BE_MMIO; + +#ifndef CONFIG_USB_OHCI_BIG_ENDIAN_MMIO + if (ohci->flags & OHCI_QUIRK_BE_MMIO) { + dev_err(&dev->dev, + "Error: CONFIG_USB_OHCI_BIG_ENDIAN_MMIO not set\n"); + err = -EINVAL; + goto err_put_clks; + } +#endif +#ifndef CONFIG_USB_OHCI_BIG_ENDIAN_DESC + if (ohci->flags & OHCI_QUIRK_BE_DESC) { + dev_err(&dev->dev, + "Error: CONFIG_USB_OHCI_BIG_ENDIAN_DESC not set\n"); + err = -EINVAL; + goto err_put_clks; + } +#endif + if (pdata->power_on) { err = pdata->power_on(dev); if (err < 0) - return err; - } - - hcd = usb_create_hcd(&ohci_platform_hc_driver, &dev->dev, - dev_name(&dev->dev)); - if (!hcd) { - err = -ENOMEM; - goto err_power; + goto err_put_clks; } hcd->rsrc_start = res_mem->start; @@ -102,11 +227,11 @@ static int ohci_platform_probe(struct platform_device *dev) hcd->regs = devm_ioremap_resource(&dev->dev, res_mem); if (IS_ERR(hcd->regs)) { err = PTR_ERR(hcd->regs); - goto err_put_hcd; + goto err_power; } err = usb_add_hcd(hcd, irq, IRQF_SHARED); if (err) - goto err_put_hcd; + goto err_power; device_wakeup_enable(hcd->self.controller); @@ -114,11 +239,17 @@ static int ohci_platform_probe(struct platform_device *dev) return err; -err_put_hcd: - usb_put_hcd(hcd); err_power: if (pdata->power_off) pdata->power_off(dev); +err_put_clks: + while (--clk >= 0) + clk_put(priv->clks[clk]); +err_put_hcd: + if (pdata == &ohci_platform_defaults) + dev->dev.platform_data = NULL; + + usb_put_hcd(hcd); return err; } @@ -127,13 +258,22 @@ static int ohci_platform_remove(struct platform_device *dev) { struct usb_hcd *hcd = platform_get_drvdata(dev); struct usb_ohci_pdata *pdata = dev_get_platdata(&dev->dev); + struct ohci_platform_priv *priv = hcd_to_ohci_priv(hcd); + int clk; usb_remove_hcd(hcd); - usb_put_hcd(hcd); if (pdata->power_off) pdata->power_off(dev); + for (clk = 0; clk < OHCI_MAX_CLKS && priv->clks[clk]; clk++) + clk_put(priv->clks[clk]); + + usb_put_hcd(hcd); + + if (pdata == &ohci_platform_defaults) + dev->dev.platform_data = NULL; + return 0; } @@ -180,6 +320,12 @@ static int ohci_platform_resume(struct device *dev) #define ohci_platform_resume NULL #endif /* CONFIG_PM */ +static const struct of_device_id ohci_platform_ids[] = { + { .compatible = "generic-ohci", }, + { } +}; +MODULE_DEVICE_TABLE(of, ohci_platform_ids); + static const struct platform_device_id ohci_platform_table[] = { { "ohci-platform", 0 }, { } @@ -200,6 +346,7 @@ static struct platform_driver ohci_platform_driver = { .owner = THIS_MODULE, .name = "ohci-platform", .pm = &ohci_platform_pm_ops, + .of_match_table = ohci_platform_ids, } }; diff --git a/drivers/usb/host/uhci-platform.c b/drivers/usb/host/uhci-platform.c index 44e6c9d..01833ab 100644 --- a/drivers/usb/host/uhci-platform.c +++ b/drivers/usb/host/uhci-platform.c @@ -148,6 +148,7 @@ static void uhci_hcd_platform_shutdown(struct platform_device *op) } static const struct of_device_id platform_uhci_ids[] = { + { .compatible = "generic-uhci", }, { .compatible = "platform-uhci", }, {} }; diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index 9992fbf..1ad6bc1 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -732,9 +732,11 @@ int xhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, /* Set the U1 and U2 exit latencies. */ memcpy(buf, &usb_bos_descriptor, USB_DT_BOS_SIZE + USB_DT_USB_SS_CAP_SIZE); - temp = readl(&xhci->cap_regs->hcs_params3); - buf[12] = HCS_U1_LATENCY(temp); - put_unaligned_le16(HCS_U2_LATENCY(temp), &buf[13]); + if ((xhci->quirks & XHCI_LPM_SUPPORT)) { + temp = readl(&xhci->cap_regs->hcs_params3); + buf[12] = HCS_U1_LATENCY(temp); + put_unaligned_le16(HCS_U2_LATENCY(temp), &buf[13]); + } /* Indicate whether the host has LTM support. */ temp = readl(&xhci->cap_regs->hcc_params); diff --git a/drivers/usb/host/xhci-mem.c b/drivers/usb/host/xhci-mem.c index bce4391..c089668 100644 --- a/drivers/usb/host/xhci-mem.c +++ b/drivers/usb/host/xhci-mem.c @@ -149,14 +149,140 @@ static void xhci_link_rings(struct xhci_hcd *xhci, struct xhci_ring *ring, } } +/* + * We need a radix tree for mapping physical addresses of TRBs to which stream + * ID they belong to. We need to do this because the host controller won't tell + * us which stream ring the TRB came from. We could store the stream ID in an + * event data TRB, but that doesn't help us for the cancellation case, since the + * endpoint may stop before it reaches that event data TRB. + * + * The radix tree maps the upper portion of the TRB DMA address to a ring + * segment that has the same upper portion of DMA addresses. For example, say I + * have segments of size 1KB, that are always 1KB aligned. A segment may + * start at 0x10c91000 and end at 0x10c913f0. If I use the upper 10 bits, the + * key to the stream ID is 0x43244. I can use the DMA address of the TRB to + * pass the radix tree a key to get the right stream ID: + * + * 0x10c90fff >> 10 = 0x43243 + * 0x10c912c0 >> 10 = 0x43244 + * 0x10c91400 >> 10 = 0x43245 + * + * Obviously, only those TRBs with DMA addresses that are within the segment + * will make the radix tree return the stream ID for that ring. + * + * Caveats for the radix tree: + * + * The radix tree uses an unsigned long as a key pair. On 32-bit systems, an + * unsigned long will be 32-bits; on a 64-bit system an unsigned long will be + * 64-bits. Since we only request 32-bit DMA addresses, we can use that as the + * key on 32-bit or 64-bit systems (it would also be fine if we asked for 64-bit + * PCI DMA addresses on a 64-bit system). There might be a problem on 32-bit + * extended systems (where the DMA address can be bigger than 32-bits), + * if we allow the PCI dma mask to be bigger than 32-bits. So don't do that. + */ +static int xhci_insert_segment_mapping(struct radix_tree_root *trb_address_map, + struct xhci_ring *ring, + struct xhci_segment *seg, + gfp_t mem_flags) +{ + unsigned long key; + int ret; + + key = (unsigned long)(seg->dma >> TRB_SEGMENT_SHIFT); + /* Skip any segments that were already added. */ + if (radix_tree_lookup(trb_address_map, key)) + return 0; + + ret = radix_tree_maybe_preload(mem_flags); + if (ret) + return ret; + ret = radix_tree_insert(trb_address_map, + key, ring); + radix_tree_preload_end(); + return ret; +} + +static void xhci_remove_segment_mapping(struct radix_tree_root *trb_address_map, + struct xhci_segment *seg) +{ + unsigned long key; + + key = (unsigned long)(seg->dma >> TRB_SEGMENT_SHIFT); + if (radix_tree_lookup(trb_address_map, key)) + radix_tree_delete(trb_address_map, key); +} + +static int xhci_update_stream_segment_mapping( + struct radix_tree_root *trb_address_map, + struct xhci_ring *ring, + struct xhci_segment *first_seg, + struct xhci_segment *last_seg, + gfp_t mem_flags) +{ + struct xhci_segment *seg; + struct xhci_segment *failed_seg; + int ret; + + if (WARN_ON_ONCE(trb_address_map == NULL)) + return 0; + + seg = first_seg; + do { + ret = xhci_insert_segment_mapping(trb_address_map, + ring, seg, mem_flags); + if (ret) + goto remove_streams; + if (seg == last_seg) + return 0; + seg = seg->next; + } while (seg != first_seg); + + return 0; + +remove_streams: + failed_seg = seg; + seg = first_seg; + do { + xhci_remove_segment_mapping(trb_address_map, seg); + if (seg == failed_seg) + return ret; + seg = seg->next; + } while (seg != first_seg); + + return ret; +} + +static void xhci_remove_stream_mapping(struct xhci_ring *ring) +{ + struct xhci_segment *seg; + + if (WARN_ON_ONCE(ring->trb_address_map == NULL)) + return; + + seg = ring->first_seg; + do { + xhci_remove_segment_mapping(ring->trb_address_map, seg); + seg = seg->next; + } while (seg != ring->first_seg); +} + +static int xhci_update_stream_mapping(struct xhci_ring *ring, gfp_t mem_flags) +{ + return xhci_update_stream_segment_mapping(ring->trb_address_map, ring, + ring->first_seg, ring->last_seg, mem_flags); +} + /* XXX: Do we need the hcd structure in all these functions? */ void xhci_ring_free(struct xhci_hcd *xhci, struct xhci_ring *ring) { if (!ring) return; - if (ring->first_seg) + if (ring->first_seg) { + if (ring->type == TYPE_STREAM) + xhci_remove_stream_mapping(ring); xhci_free_segments_for_ring(xhci, ring->first_seg); + } kfree(ring); } @@ -349,6 +475,21 @@ int xhci_ring_expansion(struct xhci_hcd *xhci, struct xhci_ring *ring, if (ret) return -ENOMEM; + if (ring->type == TYPE_STREAM) + ret = xhci_update_stream_segment_mapping(ring->trb_address_map, + ring, first, last, flags); + if (ret) { + struct xhci_segment *next; + do { + next = first->next; + xhci_segment_free(xhci, first); + if (first == last) + break; + first = next; + } while (true); + return ret; + } + xhci_link_rings(xhci, ring, first, last, num_segs); xhci_dbg_trace(xhci, trace_xhci_dbg_ring_expansion, "ring expansion succeed, now has %d segments", @@ -434,12 +575,12 @@ static void xhci_free_stream_ctx(struct xhci_hcd *xhci, struct xhci_stream_ctx *stream_ctx, dma_addr_t dma) { struct device *dev = xhci_to_hcd(xhci)->self.controller; + size_t size = sizeof(struct xhci_stream_ctx) * num_stream_ctxs; - if (num_stream_ctxs > MEDIUM_STREAM_ARRAY_SIZE) - dma_free_coherent(dev, - sizeof(struct xhci_stream_ctx)*num_stream_ctxs, + if (size > MEDIUM_STREAM_ARRAY_SIZE) + dma_free_coherent(dev, size, stream_ctx, dma); - else if (num_stream_ctxs <= SMALL_STREAM_ARRAY_SIZE) + else if (size <= SMALL_STREAM_ARRAY_SIZE) return dma_pool_free(xhci->small_streams_pool, stream_ctx, dma); else @@ -462,12 +603,12 @@ static struct xhci_stream_ctx *xhci_alloc_stream_ctx(struct xhci_hcd *xhci, gfp_t mem_flags) { struct device *dev = xhci_to_hcd(xhci)->self.controller; + size_t size = sizeof(struct xhci_stream_ctx) * num_stream_ctxs; - if (num_stream_ctxs > MEDIUM_STREAM_ARRAY_SIZE) - return dma_alloc_coherent(dev, - sizeof(struct xhci_stream_ctx)*num_stream_ctxs, + if (size > MEDIUM_STREAM_ARRAY_SIZE) + return dma_alloc_coherent(dev, size, dma, mem_flags); - else if (num_stream_ctxs <= SMALL_STREAM_ARRAY_SIZE) + else if (size <= SMALL_STREAM_ARRAY_SIZE) return dma_pool_alloc(xhci->small_streams_pool, mem_flags, dma); else @@ -510,36 +651,6 @@ struct xhci_ring *xhci_stream_id_to_ring( * The number of stream contexts in the stream context array may be bigger than * the number of streams the driver wants to use. This is because the number of * stream context array entries must be a power of two. - * - * We need a radix tree for mapping physical addresses of TRBs to which stream - * ID they belong to. We need to do this because the host controller won't tell - * us which stream ring the TRB came from. We could store the stream ID in an - * event data TRB, but that doesn't help us for the cancellation case, since the - * endpoint may stop before it reaches that event data TRB. - * - * The radix tree maps the upper portion of the TRB DMA address to a ring - * segment that has the same upper portion of DMA addresses. For example, say I - * have segments of size 1KB, that are always 64-byte aligned. A segment may - * start at 0x10c91000 and end at 0x10c913f0. If I use the upper 10 bits, the - * key to the stream ID is 0x43244. I can use the DMA address of the TRB to - * pass the radix tree a key to get the right stream ID: - * - * 0x10c90fff >> 10 = 0x43243 - * 0x10c912c0 >> 10 = 0x43244 - * 0x10c91400 >> 10 = 0x43245 - * - * Obviously, only those TRBs with DMA addresses that are within the segment - * will make the radix tree return the stream ID for that ring. - * - * Caveats for the radix tree: - * - * The radix tree uses an unsigned long as a key pair. On 32-bit systems, an - * unsigned long will be 32-bits; on a 64-bit system an unsigned long will be - * 64-bits. Since we only request 32-bit DMA addresses, we can use that as the - * key on 32-bit or 64-bit systems (it would also be fine if we asked for 64-bit - * PCI DMA addresses on a 64-bit system). There might be a problem on 32-bit - * extended systems (where the DMA address can be bigger than 32-bits), - * if we allow the PCI dma mask to be bigger than 32-bits. So don't do that. */ struct xhci_stream_info *xhci_alloc_stream_info(struct xhci_hcd *xhci, unsigned int num_stream_ctxs, @@ -548,7 +659,6 @@ struct xhci_stream_info *xhci_alloc_stream_info(struct xhci_hcd *xhci, struct xhci_stream_info *stream_info; u32 cur_stream; struct xhci_ring *cur_ring; - unsigned long key; u64 addr; int ret; @@ -603,6 +713,7 @@ struct xhci_stream_info *xhci_alloc_stream_info(struct xhci_hcd *xhci, if (!cur_ring) goto cleanup_rings; cur_ring->stream_id = cur_stream; + cur_ring->trb_address_map = &stream_info->trb_address_map; /* Set deq ptr, cycle bit, and stream context type */ addr = cur_ring->first_seg->dma | SCT_FOR_CTX(SCT_PRI_TR) | @@ -612,10 +723,7 @@ struct xhci_stream_info *xhci_alloc_stream_info(struct xhci_hcd *xhci, xhci_dbg(xhci, "Setting stream %d ring ptr to 0x%08llx\n", cur_stream, (unsigned long long) addr); - key = (unsigned long) - (cur_ring->first_seg->dma >> TRB_SEGMENT_SHIFT); - ret = radix_tree_insert(&stream_info->trb_address_map, - key, cur_ring); + ret = xhci_update_stream_mapping(cur_ring, mem_flags); if (ret) { xhci_ring_free(xhci, cur_ring); stream_info->stream_rings[cur_stream] = NULL; @@ -635,9 +743,6 @@ cleanup_rings: for (cur_stream = 1; cur_stream < num_streams; cur_stream++) { cur_ring = stream_info->stream_rings[cur_stream]; if (cur_ring) { - addr = cur_ring->first_seg->dma; - radix_tree_delete(&stream_info->trb_address_map, - addr >> TRB_SEGMENT_SHIFT); xhci_ring_free(xhci, cur_ring); stream_info->stream_rings[cur_stream] = NULL; } @@ -698,7 +803,6 @@ void xhci_free_stream_info(struct xhci_hcd *xhci, { int cur_stream; struct xhci_ring *cur_ring; - dma_addr_t addr; if (!stream_info) return; @@ -707,9 +811,6 @@ void xhci_free_stream_info(struct xhci_hcd *xhci, cur_stream++) { cur_ring = stream_info->stream_rings[cur_stream]; if (cur_ring) { - addr = cur_ring->first_seg->dma; - radix_tree_delete(&stream_info->trb_address_map, - addr >> TRB_SEGMENT_SHIFT); xhci_ring_free(xhci, cur_ring); stream_info->stream_rings[cur_stream] = NULL; } @@ -1711,7 +1812,6 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci) if (xhci->lpm_command) xhci_free_command(xhci, xhci->lpm_command); - xhci->cmd_ring_reserved_trbs = 0; if (xhci->cmd_ring) xhci_ring_free(xhci, xhci->cmd_ring); xhci->cmd_ring = NULL; @@ -1776,6 +1876,7 @@ void xhci_mem_cleanup(struct xhci_hcd *xhci) } no_bw: + xhci->cmd_ring_reserved_trbs = 0; xhci->num_usb2_ports = 0; xhci->num_usb3_ports = 0; xhci->num_active_eps = 0; @@ -2274,11 +2375,12 @@ int xhci_mem_init(struct xhci_hcd *xhci, gfp_t flags) /* * Initialize the ring segment pool. The ring must be a contiguous * structure comprised of TRBs. The TRBs must be 16 byte aligned, - * however, the command ring segment needs 64-byte aligned segments, - * so we pick the greater alignment need. + * however, the command ring segment needs 64-byte aligned segments + * and our use of dma addresses in the trb_address_map radix tree needs + * TRB_SEGMENT_SIZE alignment, so we pick the greater alignment need. */ xhci->segment_pool = dma_pool_create("xHCI ring segments", dev, - TRB_SEGMENT_SIZE, 64, xhci->page_size); + TRB_SEGMENT_SIZE, TRB_SEGMENT_SIZE, xhci->page_size); /* See Table 46 and Note on Figure 55 */ xhci->device_pool = dma_pool_create("xHCI input/output contexts", dev, diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c index 04f986d..47390e3 100644 --- a/drivers/usb/host/xhci-pci.c +++ b/drivers/usb/host/xhci-pci.c @@ -190,6 +190,10 @@ static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) struct usb_hcd *hcd; driver = (struct hc_driver *)id->driver_data; + + /* Prevent runtime suspending between USB-2 and USB-3 initialization */ + pm_runtime_get_noresume(&dev->dev); + /* Register the USB 2.0 roothub. * FIXME: USB core must know to register the USB 2.0 roothub first. * This is sort of silly, because we could just set the HCD driver flags @@ -199,7 +203,7 @@ static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) retval = usb_hcd_pci_probe(dev, id); if (retval) - return retval; + goto put_runtime_pm; /* USB 2.0 roothub is stored in the PCI device now. */ hcd = dev_get_drvdata(&dev->dev); @@ -222,11 +226,11 @@ static int xhci_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) goto put_usb3_hcd; /* Roothub already marked as USB 3.0 speed */ - /* We know the LPM timeout algorithms for this host, let the USB core - * enable and disable LPM for devices under the USB 3.0 roothub. - */ - if (xhci->quirks & XHCI_LPM_SUPPORT) - hcd_to_bus(xhci->shared_hcd)->root_hub->lpm_capable = 1; + if (HCC_MAX_PSA(xhci->hcc_params) >= 4) + xhci->shared_hcd->can_do_streams = 1; + + /* USB-2 and USB-3 roothubs initialized, allow runtime pm suspend */ + pm_runtime_put_noidle(&dev->dev); return 0; @@ -234,6 +238,8 @@ put_usb3_hcd: usb_put_hcd(xhci->shared_hcd); dealloc_usb2_hcd: usb_hcd_pci_remove(dev); +put_runtime_pm: + pm_runtime_put_noidle(&dev->dev); return retval; } diff --git a/drivers/usb/host/xhci-plat.c b/drivers/usb/host/xhci-plat.c index 8abda5c..151901c 100644 --- a/drivers/usb/host/xhci-plat.c +++ b/drivers/usb/host/xhci-plat.c @@ -158,6 +158,9 @@ static int xhci_plat_probe(struct platform_device *pdev) */ *((struct xhci_hcd **) xhci->shared_hcd->hcd_priv) = xhci; + if (HCC_MAX_PSA(xhci->hcc_params) >= 4) + xhci->shared_hcd->can_do_streams = 1; + ret = usb_add_hcd(xhci->shared_hcd, irq, IRQF_SHARED); if (ret) goto put_usb3_hcd; @@ -226,6 +229,7 @@ static const struct dev_pm_ops xhci_plat_pm_ops = { #ifdef CONFIG_OF static const struct of_device_id usb_xhci_of_match[] = { + { .compatible = "generic-xhci" }, { .compatible = "xhci-platform" }, { }, }; diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 0ed64eb..5f926be 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -546,9 +546,9 @@ void xhci_find_new_dequeue_state(struct xhci_hcd *xhci, struct xhci_dequeue_state *state) { struct xhci_virt_device *dev = xhci->devs[slot_id]; + struct xhci_virt_ep *ep = &dev->eps[ep_index]; struct xhci_ring *ep_ring; struct xhci_generic_trb *trb; - struct xhci_ep_ctx *ep_ctx; dma_addr_t addr; ep_ring = xhci_triad_to_transfer_ring(xhci, slot_id, @@ -573,8 +573,16 @@ void xhci_find_new_dequeue_state(struct xhci_hcd *xhci, /* Dig out the cycle state saved by the xHC during the stop ep cmd */ xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb, "Finding endpoint context"); - ep_ctx = xhci_get_ep_ctx(xhci, dev->out_ctx, ep_index); - state->new_cycle_state = 0x1 & le64_to_cpu(ep_ctx->deq); + /* 4.6.9 the css flag is written to the stream context for streams */ + if (ep->ep_state & EP_HAS_STREAMS) { + struct xhci_stream_ctx *ctx = + &ep->stream_info->stream_ctx_array[stream_id]; + state->new_cycle_state = 0x1 & le64_to_cpu(ctx->stream_ring); + } else { + struct xhci_ep_ctx *ep_ctx + = xhci_get_ep_ctx(xhci, dev->out_ctx, ep_index); + state->new_cycle_state = 0x1 & le64_to_cpu(ep_ctx->deq); + } state->new_deq_ptr = cur_td->last_trb; xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb, @@ -892,6 +900,57 @@ remove_finished_td: /* Return to the event handler with xhci->lock re-acquired */ } +static void xhci_kill_ring_urbs(struct xhci_hcd *xhci, struct xhci_ring *ring) +{ + struct xhci_td *cur_td; + + while (!list_empty(&ring->td_list)) { + cur_td = list_first_entry(&ring->td_list, + struct xhci_td, td_list); + list_del_init(&cur_td->td_list); + if (!list_empty(&cur_td->cancelled_td_list)) + list_del_init(&cur_td->cancelled_td_list); + xhci_giveback_urb_in_irq(xhci, cur_td, -ESHUTDOWN); + } +} + +static void xhci_kill_endpoint_urbs(struct xhci_hcd *xhci, + int slot_id, int ep_index) +{ + struct xhci_td *cur_td; + struct xhci_virt_ep *ep; + struct xhci_ring *ring; + + ep = &xhci->devs[slot_id]->eps[ep_index]; + if ((ep->ep_state & EP_HAS_STREAMS) || + (ep->ep_state & EP_GETTING_NO_STREAMS)) { + int stream_id; + + for (stream_id = 0; stream_id < ep->stream_info->num_streams; + stream_id++) { + xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb, + "Killing URBs for slot ID %u, ep index %u, stream %u", + slot_id, ep_index, stream_id + 1); + xhci_kill_ring_urbs(xhci, + ep->stream_info->stream_rings[stream_id]); + } + } else { + ring = ep->ring; + if (!ring) + return; + xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb, + "Killing URBs for slot ID %u, ep index %u", + slot_id, ep_index); + xhci_kill_ring_urbs(xhci, ring); + } + while (!list_empty(&ep->cancelled_td_list)) { + cur_td = list_first_entry(&ep->cancelled_td_list, + struct xhci_td, cancelled_td_list); + list_del_init(&cur_td->cancelled_td_list); + xhci_giveback_urb_in_irq(xhci, cur_td, -ESHUTDOWN); + } +} + /* Watchdog timer function for when a stop endpoint command fails to complete. * In this case, we assume the host controller is broken or dying or dead. The * host may still be completing some other events, so we have to be careful to @@ -915,9 +974,6 @@ void xhci_stop_endpoint_command_watchdog(unsigned long arg) { struct xhci_hcd *xhci; struct xhci_virt_ep *ep; - struct xhci_virt_ep *temp_ep; - struct xhci_ring *ring; - struct xhci_td *cur_td; int ret, i, j; unsigned long flags; @@ -974,34 +1030,8 @@ void xhci_stop_endpoint_command_watchdog(unsigned long arg) for (i = 0; i < MAX_HC_SLOTS; i++) { if (!xhci->devs[i]) continue; - for (j = 0; j < 31; j++) { - temp_ep = &xhci->devs[i]->eps[j]; - ring = temp_ep->ring; - if (!ring) - continue; - xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb, - "Killing URBs for slot ID %u, " - "ep index %u", i, j); - while (!list_empty(&ring->td_list)) { - cur_td = list_first_entry(&ring->td_list, - struct xhci_td, - td_list); - list_del_init(&cur_td->td_list); - if (!list_empty(&cur_td->cancelled_td_list)) - list_del_init(&cur_td->cancelled_td_list); - xhci_giveback_urb_in_irq(xhci, cur_td, - -ESHUTDOWN); - } - while (!list_empty(&temp_ep->cancelled_td_list)) { - cur_td = list_first_entry( - &temp_ep->cancelled_td_list, - struct xhci_td, - cancelled_td_list); - list_del_init(&cur_td->cancelled_td_list); - xhci_giveback_urb_in_irq(xhci, cur_td, - -ESHUTDOWN); - } - } + for (j = 0; j < 31; j++) + xhci_kill_endpoint_urbs(xhci, i, j); } spin_unlock_irqrestore(&xhci->lock, flags); xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb, @@ -1073,17 +1103,18 @@ static void xhci_handle_cmd_set_deq(struct xhci_hcd *xhci, int slot_id, unsigned int stream_id; struct xhci_ring *ep_ring; struct xhci_virt_device *dev; + struct xhci_virt_ep *ep; struct xhci_ep_ctx *ep_ctx; struct xhci_slot_ctx *slot_ctx; ep_index = TRB_TO_EP_INDEX(le32_to_cpu(trb->generic.field[3])); stream_id = TRB_TO_STREAM_ID(le32_to_cpu(trb->generic.field[2])); dev = xhci->devs[slot_id]; + ep = &dev->eps[ep_index]; ep_ring = xhci_stream_id_to_ring(dev, ep_index, stream_id); if (!ep_ring) { - xhci_warn(xhci, "WARN Set TR deq ptr command for " - "freed stream ID %u\n", + xhci_warn(xhci, "WARN Set TR deq ptr command for freed stream ID %u\n", stream_id); /* XXX: Harmless??? */ dev->eps[ep_index].ep_state &= ~SET_DEQ_PENDING; @@ -1099,12 +1130,10 @@ static void xhci_handle_cmd_set_deq(struct xhci_hcd *xhci, int slot_id, switch (cmd_comp_code) { case COMP_TRB_ERR: - xhci_warn(xhci, "WARN Set TR Deq Ptr cmd invalid because " - "of stream ID configuration\n"); + xhci_warn(xhci, "WARN Set TR Deq Ptr cmd invalid because of stream ID configuration\n"); break; case COMP_CTX_STATE: - xhci_warn(xhci, "WARN Set TR Deq Ptr cmd failed due " - "to incorrect slot or ep state.\n"); + xhci_warn(xhci, "WARN Set TR Deq Ptr cmd failed due to incorrect slot or ep state.\n"); ep_state = le32_to_cpu(ep_ctx->ep_info); ep_state &= EP_STATE_MASK; slot_state = le32_to_cpu(slot_ctx->dev_state); @@ -1114,13 +1143,12 @@ static void xhci_handle_cmd_set_deq(struct xhci_hcd *xhci, int slot_id, slot_state, ep_state); break; case COMP_EBADSLT: - xhci_warn(xhci, "WARN Set TR Deq Ptr cmd failed because " - "slot %u was not enabled.\n", slot_id); + xhci_warn(xhci, "WARN Set TR Deq Ptr cmd failed because slot %u was not enabled.\n", + slot_id); break; default: - xhci_warn(xhci, "WARN Set TR Deq Ptr cmd with unknown " - "completion code of %u.\n", - cmd_comp_code); + xhci_warn(xhci, "WARN Set TR Deq Ptr cmd with unknown completion code of %u.\n", + cmd_comp_code); break; } /* OK what do we do now? The endpoint state is hosed, and we @@ -1130,23 +1158,28 @@ static void xhci_handle_cmd_set_deq(struct xhci_hcd *xhci, int slot_id, * cancelling URBs, which might not be an error... */ } else { + u64 deq; + /* 4.6.10 deq ptr is written to the stream ctx for streams */ + if (ep->ep_state & EP_HAS_STREAMS) { + struct xhci_stream_ctx *ctx = + &ep->stream_info->stream_ctx_array[stream_id]; + deq = le64_to_cpu(ctx->stream_ring) & SCTX_DEQ_MASK; + } else { + deq = le64_to_cpu(ep_ctx->deq) & ~EP_CTX_CYCLE_MASK; + } xhci_dbg_trace(xhci, trace_xhci_dbg_cancel_urb, - "Successful Set TR Deq Ptr cmd, deq = @%08llx", - le64_to_cpu(ep_ctx->deq)); - if (xhci_trb_virt_to_dma(dev->eps[ep_index].queued_deq_seg, - dev->eps[ep_index].queued_deq_ptr) == - (le64_to_cpu(ep_ctx->deq) & ~(EP_CTX_CYCLE_MASK))) { + "Successful Set TR Deq Ptr cmd, deq = @%08llx", deq); + if (xhci_trb_virt_to_dma(ep->queued_deq_seg, + ep->queued_deq_ptr) == deq) { /* Update the ring's dequeue segment and dequeue pointer * to reflect the new position. */ update_ring_for_set_deq_completion(xhci, dev, ep_ring, ep_index); } else { - xhci_warn(xhci, "Mismatch between completed Set TR Deq " - "Ptr command & xHCI internal state.\n"); + xhci_warn(xhci, "Mismatch between completed Set TR Deq Ptr command & xHCI internal state.\n"); xhci_warn(xhci, "ep deq seg = %p, deq ptr = %p\n", - dev->eps[ep_index].queued_deq_seg, - dev->eps[ep_index].queued_deq_ptr); + ep->queued_deq_seg, ep->queued_deq_ptr); } } @@ -4070,6 +4103,7 @@ static int queue_set_tr_deq(struct xhci_hcd *xhci, int slot_id, u32 trb_slot_id = SLOT_ID_FOR_TRB(slot_id); u32 trb_ep_index = EP_ID_FOR_TRB(ep_index); u32 trb_stream_id = STREAM_ID_FOR_TRB(stream_id); + u32 trb_sct = 0; u32 type = TRB_TYPE(TRB_SET_DEQ); struct xhci_virt_ep *ep; @@ -4088,7 +4122,9 @@ static int queue_set_tr_deq(struct xhci_hcd *xhci, int slot_id, } ep->queued_deq_seg = deq_seg; ep->queued_deq_ptr = deq_ptr; - return queue_command(xhci, lower_32_bits(addr) | cycle_state, + if (stream_id) + trb_sct = SCT_FOR_TRB(SCT_PRI_TR); + return queue_command(xhci, lower_32_bits(addr) | trb_sct | cycle_state, upper_32_bits(addr), trb_stream_id, trb_slot_id | trb_ep_index | type, false); } diff --git a/drivers/usb/host/xhci.c b/drivers/usb/host/xhci.c index 924a6cc..8fe4e12 100644 --- a/drivers/usb/host/xhci.c +++ b/drivers/usb/host/xhci.c @@ -390,6 +390,10 @@ static int xhci_try_enable_msi(struct usb_hcd *hcd) } legacy_irq: + if (!strlen(hcd->irq_descr)) + snprintf(hcd->irq_descr, sizeof(hcd->irq_descr), "%s:usb%d", + hcd->driver->description, hcd->self.busnum); + /* fall back to legacy interrupt*/ ret = request_irq(pdev->irq, &usb_hcd_irq, IRQF_SHARED, hcd->irq_descr, hcd); @@ -2678,6 +2682,20 @@ static int xhci_configure_endpoint(struct xhci_hcd *xhci, return ret; } +static void xhci_check_bw_drop_ep_streams(struct xhci_hcd *xhci, + struct xhci_virt_device *vdev, int i) +{ + struct xhci_virt_ep *ep = &vdev->eps[i]; + + if (ep->ep_state & EP_HAS_STREAMS) { + xhci_warn(xhci, "WARN: endpoint 0x%02x has streams on set_interface, freeing streams.\n", + xhci_get_endpoint_address(i)); + xhci_free_stream_info(xhci, ep->stream_info); + ep->stream_info = NULL; + ep->ep_state &= ~EP_HAS_STREAMS; + } +} + /* Called after one or more calls to xhci_add_endpoint() or * xhci_drop_endpoint(). If this call fails, the USB core is expected * to call xhci_reset_bandwidth(). @@ -2742,8 +2760,10 @@ int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev) /* Free any rings that were dropped, but not changed. */ for (i = 1; i < 31; ++i) { if ((le32_to_cpu(ctrl_ctx->drop_flags) & (1 << (i + 1))) && - !(le32_to_cpu(ctrl_ctx->add_flags) & (1 << (i + 1)))) + !(le32_to_cpu(ctrl_ctx->add_flags) & (1 << (i + 1)))) { xhci_free_or_cache_endpoint_ring(xhci, virt_dev, i); + xhci_check_bw_drop_ep_streams(xhci, virt_dev, i); + } } xhci_zero_in_ctx(xhci, virt_dev); /* @@ -2759,6 +2779,7 @@ int xhci_check_bandwidth(struct usb_hcd *hcd, struct usb_device *udev) if (virt_dev->eps[i].ring) { xhci_free_or_cache_endpoint_ring(xhci, virt_dev, i); } + xhci_check_bw_drop_ep_streams(xhci, virt_dev, i); virt_dev->eps[i].ring = virt_dev->eps[i].new_ring; virt_dev->eps[i].new_ring = NULL; } @@ -2954,7 +2975,7 @@ static int xhci_check_streams_endpoint(struct xhci_hcd *xhci, ret = xhci_check_args(xhci_to_hcd(xhci), udev, ep, 1, true, __func__); if (ret <= 0) return -EINVAL; - if (ep->ss_ep_comp.bmAttributes == 0) { + if (usb_ss_max_streams(&ep->ss_ep_comp) == 0) { xhci_warn(xhci, "WARN: SuperSpeed Endpoint Companion" " descriptor for ep 0x%x does not support streams\n", ep->desc.bEndpointAddress); @@ -3121,6 +3142,12 @@ int xhci_alloc_streams(struct usb_hcd *hcd, struct usb_device *udev, xhci_dbg(xhci, "Driver wants %u stream IDs (including stream 0).\n", num_streams); + /* MaxPSASize value 0 (2 streams) means streams are not supported */ + if (HCC_MAX_PSA(xhci->hcc_params) < 4) { + xhci_dbg(xhci, "xHCI controller does not support streams.\n"); + return -ENOSYS; + } + config_cmd = xhci_alloc_command(xhci, true, true, mem_flags); if (!config_cmd) { xhci_dbg(xhci, "Could not allocate xHCI command structure.\n"); @@ -3519,6 +3546,8 @@ int xhci_discover_or_reset_device(struct usb_hcd *hcd, struct usb_device *udev) struct xhci_virt_ep *ep = &virt_dev->eps[i]; if (ep->ep_state & EP_HAS_STREAMS) { + xhci_warn(xhci, "WARN: endpoint 0x%02x has streams on device reset, freeing streams.\n", + xhci_get_endpoint_address(i)); xhci_free_stream_info(xhci, ep->stream_info); ep->stream_info = NULL; ep->ep_state &= ~EP_HAS_STREAMS; diff --git a/drivers/usb/host/xhci.h b/drivers/usb/host/xhci.h index 58ed9d0..d280e92 100644 --- a/drivers/usb/host/xhci.h +++ b/drivers/usb/host/xhci.h @@ -703,6 +703,7 @@ struct xhci_ep_ctx { /* deq bitmasks */ #define EP_CTX_CYCLE_MASK (1 << 0) +#define SCTX_DEQ_MASK (~0xfL) /** @@ -1118,9 +1119,10 @@ enum xhci_setup_dev { #define TRB_TO_SUSPEND_PORT(p) (((p) & (1 << 23)) >> 23) #define LAST_EP_INDEX 30 -/* Set TR Dequeue Pointer command TRB fields */ +/* Set TR Dequeue Pointer command TRB fields, 6.4.3.9 */ #define TRB_TO_STREAM_ID(p) ((((p) & (0xffff << 16)) >> 16)) #define STREAM_ID_FOR_TRB(p) ((((p)) & 0xffff) << 16) +#define SCT_FOR_TRB(p) (((p) << 1) & 0x7) /* Port Status Change Event TRB fields */ @@ -1341,6 +1343,7 @@ struct xhci_ring { unsigned int num_trbs_free_temp; enum xhci_ring_type type; bool last_td_was_short; + struct radix_tree_root *trb_address_map; }; struct xhci_erst_entry { diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig index ba5f70f..1bca274d 100644 --- a/drivers/usb/misc/Kconfig +++ b/drivers/usb/misc/Kconfig @@ -128,7 +128,6 @@ config USB_IDMOUSE config USB_FTDI_ELAN tristate "Elan PCMCIA CardBus Adapter USB Client" - default M help ELAN's Uxxx series of adapters are USB to PCMCIA CardBus adapters. Currently only the U132 adapter is available. diff --git a/drivers/usb/misc/sisusbvga/sisusb.c b/drivers/usb/misc/sisusbvga/sisusb.c index de98906..06b5d77 100644 --- a/drivers/usb/misc/sisusbvga/sisusb.c +++ b/drivers/usb/misc/sisusbvga/sisusb.c @@ -2123,8 +2123,8 @@ sisusb_get_ramconfig(struct sisusb_usb_data *sisusb) u8 tmp8, tmp82, ramtype; int bw = 0; char *ramtypetext1 = NULL; - const char *ramtypetext2[] = { "SDR SDRAM", "SDR SGRAM", - "DDR SDRAM", "DDR SGRAM" }; + static const char ram_datarate[4] = {'S', 'S', 'D', 'D'}; + static const char ram_dynamictype[4] = {'D', 'G', 'D', 'G'}; static const int busSDR[4] = {64, 64, 128, 128}; static const int busDDR[4] = {32, 32, 64, 64}; static const int busDDRA[4] = {64+32, 64+32 , (64+32)*2, (64+32)*2}; @@ -2156,8 +2156,10 @@ sisusb_get_ramconfig(struct sisusb_usb_data *sisusb) break; } - dev_info(&sisusb->sisusb_dev->dev, "%dMB %s %s, bus width %d\n", (sisusb->vramsize >> 20), ramtypetext1, - ramtypetext2[ramtype], bw); + + dev_info(&sisusb->sisusb_dev->dev, "%dMB %s %cDR S%cRAM, bus width %d\n", + sisusb->vramsize >> 20, ramtypetext1, + ram_datarate[ramtype], ram_dynamictype[ramtype], bw); } static int diff --git a/drivers/usb/misc/usbled.c b/drivers/usb/misc/usbled.c index 78eb4ff..bdef0d6 100644 --- a/drivers/usb/misc/usbled.c +++ b/drivers/usb/misc/usbled.c @@ -22,8 +22,27 @@ enum led_type { DELCOM_VISUAL_SIGNAL_INDICATOR, DREAM_CHEEKY_WEBMAIL_NOTIFIER, + RISO_KAGAKU_LED }; +/* the Webmail LED made by RISO KAGAKU CORP. decodes a color index + internally, we want to keep the red+green+blue sysfs api, so we decode + from 1-bit RGB to the riso kagaku color index according to this table... */ + +static unsigned const char riso_kagaku_tbl[] = { +/* R+2G+4B -> riso kagaku color index */ + [0] = 0, /* black */ + [1] = 2, /* red */ + [2] = 1, /* green */ + [3] = 5, /* yellow */ + [4] = 3, /* blue */ + [5] = 6, /* magenta */ + [6] = 4, /* cyan */ + [7] = 7 /* white */ +}; + +#define RISO_KAGAKU_IX(r,g,b) riso_kagaku_tbl[((r)?1:0)+((g)?2:0)+((b)?4:0)] + /* table of devices that work with this driver */ static const struct usb_device_id id_table[] = { { USB_DEVICE(0x0fc5, 0x1223), @@ -32,6 +51,8 @@ static const struct usb_device_id id_table[] = { .driver_info = DREAM_CHEEKY_WEBMAIL_NOTIFIER }, { USB_DEVICE(0x1d34, 0x000a), .driver_info = DREAM_CHEEKY_WEBMAIL_NOTIFIER }, + { USB_DEVICE(0x1294, 0x1320), + .driver_info = RISO_KAGAKU_LED }, { }, }; MODULE_DEVICE_TABLE(usb, id_table); @@ -48,6 +69,7 @@ static void change_color(struct usb_led *led) { int retval = 0; unsigned char *buffer; + int actlength; buffer = kmalloc(8, GFP_KERNEL); if (!buffer) { @@ -104,6 +126,18 @@ static void change_color(struct usb_led *led) 2000); break; + case RISO_KAGAKU_LED: + buffer[0] = RISO_KAGAKU_IX(led->red, led->green, led->blue); + buffer[1] = 0; + buffer[2] = 0; + buffer[3] = 0; + buffer[4] = 0; + + retval = usb_interrupt_msg(led->udev, + usb_sndctrlpipe(led->udev, 2), + buffer, 5, &actlength, 1000 /*ms timeout*/); + break; + default: dev_err(&led->udev->dev, "unknown device type %d\n", led->type); } diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig index 688dc8b..8b78979 100644 --- a/drivers/usb/musb/Kconfig +++ b/drivers/usb/musb/Kconfig @@ -43,6 +43,7 @@ config USB_MUSB_HOST config USB_MUSB_GADGET bool "Gadget only mode" depends on USB_GADGET=y || USB_GADGET=USB_MUSB_HDRC + depends on HAS_DMA help Select this when you want to use MUSB in gadget mode only, thereby the host feature will be regressed. @@ -50,6 +51,7 @@ config USB_MUSB_GADGET config USB_MUSB_DUAL_ROLE bool "Dual Role mode" depends on ((USB=y || USB=USB_MUSB_HDRC) && (USB_GADGET=y || USB_GADGET=USB_MUSB_HDRC)) + depends on HAS_DMA help This is the default mode of working of MUSB controller where both host and gadget features are enabled. diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 239ad0b..0757690 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -438,7 +438,6 @@ void musb_hnp_stop(struct musb *musb) static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb, u8 devctl) { - struct usb_otg *otg = musb->xceiv->otg; irqreturn_t handled = IRQ_NONE; dev_dbg(musb->controller, "<== DevCtl=%02x, int_usb=0x%x\n", devctl, @@ -656,7 +655,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb, break; case OTG_STATE_B_PERIPHERAL: musb_g_suspend(musb); - musb->is_active = otg->gadget->b_hnp_enable; + musb->is_active = musb->g.b_hnp_enable; if (musb->is_active) { musb->xceiv->state = OTG_STATE_B_WAIT_ACON; dev_dbg(musb->controller, "HNP: Setting timer for b_ase0_brst\n"); @@ -672,7 +671,7 @@ static irqreturn_t musb_stage0_irq(struct musb *musb, u8 int_usb, break; case OTG_STATE_A_HOST: musb->xceiv->state = OTG_STATE_A_SUSPEND; - musb->is_active = otg->host->b_hnp_enable; + musb->is_active = musb->hcd->self.b_hnp_enable; break; case OTG_STATE_B_HOST: /* Transition to B_PERIPHERAL, see 6.8.2.6 p 44 */ diff --git a/drivers/usb/musb/musb_cppi41.c b/drivers/usb/musb/musb_cppi41.c index f889296..7b8bbf5 100644 --- a/drivers/usb/musb/musb_cppi41.c +++ b/drivers/usb/musb/musb_cppi41.c @@ -39,6 +39,7 @@ struct cppi41_dma_channel { u32 transferred; u32 packet_sz; struct list_head tx_check; + struct work_struct dma_completion; }; #define MUSB_DMA_NUM_CHANNELS 15 @@ -112,6 +113,18 @@ static bool musb_is_tx_fifo_empty(struct musb_hw_ep *hw_ep) return true; } +static bool is_isoc(struct musb_hw_ep *hw_ep, bool in) +{ + if (in && hw_ep->in_qh) { + if (hw_ep->in_qh->type == USB_ENDPOINT_XFER_ISOC) + return true; + } else if (hw_ep->out_qh) { + if (hw_ep->out_qh->type == USB_ENDPOINT_XFER_ISOC) + return true; + } + return false; +} + static void cppi41_dma_callback(void *private_data); static void cppi41_trans_done(struct cppi41_dma_channel *cppi41_channel) @@ -119,7 +132,8 @@ static void cppi41_trans_done(struct cppi41_dma_channel *cppi41_channel) struct musb_hw_ep *hw_ep = cppi41_channel->hw_ep; struct musb *musb = hw_ep->musb; - if (!cppi41_channel->prog_len) { + if (!cppi41_channel->prog_len || + (cppi41_channel->channel.status == MUSB_DMA_STATUS_FREE)) { /* done, complete */ cppi41_channel->channel.actual_len = @@ -165,6 +179,32 @@ static void cppi41_trans_done(struct cppi41_dma_channel *cppi41_channel) } } +static void cppi_trans_done_work(struct work_struct *work) +{ + unsigned long flags; + struct cppi41_dma_channel *cppi41_channel = + container_of(work, struct cppi41_dma_channel, dma_completion); + struct cppi41_dma_controller *controller = cppi41_channel->controller; + struct musb *musb = controller->musb; + struct musb_hw_ep *hw_ep = cppi41_channel->hw_ep; + bool empty; + + if (!cppi41_channel->is_tx && is_isoc(hw_ep, 1)) { + spin_lock_irqsave(&musb->lock, flags); + cppi41_trans_done(cppi41_channel); + spin_unlock_irqrestore(&musb->lock, flags); + } else { + empty = musb_is_tx_fifo_empty(hw_ep); + if (empty) { + spin_lock_irqsave(&musb->lock, flags); + cppi41_trans_done(cppi41_channel); + spin_unlock_irqrestore(&musb->lock, flags); + } else { + schedule_work(&cppi41_channel->dma_completion); + } + } +} + static enum hrtimer_restart cppi41_recheck_tx_req(struct hrtimer *timer) { struct cppi41_dma_controller *controller; @@ -228,6 +268,14 @@ static void cppi41_dma_callback(void *private_data) transferred < cppi41_channel->packet_sz) cppi41_channel->prog_len = 0; + if (!cppi41_channel->is_tx) { + if (is_isoc(hw_ep, 1)) + schedule_work(&cppi41_channel->dma_completion); + else + cppi41_trans_done(cppi41_channel); + goto out; + } + empty = musb_is_tx_fifo_empty(hw_ep); if (empty) { cppi41_trans_done(cppi41_channel); @@ -264,6 +312,10 @@ static void cppi41_dma_callback(void *private_data) goto out; } } + if (is_isoc(hw_ep, 0)) { + schedule_work(&cppi41_channel->dma_completion); + goto out; + } list_add_tail(&cppi41_channel->tx_check, &controller->early_tx_list); if (!hrtimer_active(&controller->early_tx)) { @@ -448,12 +500,25 @@ static int cppi41_dma_channel_program(struct dma_channel *channel, dma_addr_t dma_addr, u32 len) { int ret; + struct cppi41_dma_channel *cppi41_channel = channel->private_data; + int hb_mult = 0; BUG_ON(channel->status == MUSB_DMA_STATUS_UNKNOWN || channel->status == MUSB_DMA_STATUS_BUSY); + if (is_host_active(cppi41_channel->controller->musb)) { + if (cppi41_channel->is_tx) + hb_mult = cppi41_channel->hw_ep->out_qh->hb_mult; + else + hb_mult = cppi41_channel->hw_ep->in_qh->hb_mult; + } + channel->status = MUSB_DMA_STATUS_BUSY; channel->actual_len = 0; + + if (hb_mult) + packet_sz = hb_mult * (packet_sz & 0x7FF); + ret = cppi41_configure_channel(channel, packet_sz, mode, dma_addr, len); if (!ret) channel->status = MUSB_DMA_STATUS_FREE; @@ -607,6 +672,8 @@ static int cppi41_dma_controller_start(struct cppi41_dma_controller *controller) cppi41_channel->port_num = port; cppi41_channel->is_tx = is_tx; INIT_LIST_HEAD(&cppi41_channel->tx_check); + INIT_WORK(&cppi41_channel->dma_completion, + cppi_trans_done_work); musb_dma = &cppi41_channel->channel; musb_dma->private_data = cppi41_channel; diff --git a/drivers/usb/musb/musb_dsps.c b/drivers/usb/musb/musb_dsps.c index 7a109ea..3372ded 100644 --- a/drivers/usb/musb/musb_dsps.c +++ b/drivers/usb/musb/musb_dsps.c @@ -45,6 +45,8 @@ #include <linux/of_irq.h> #include <linux/usb/of.h> +#include <linux/debugfs.h> + #include "musb_core.h" static const struct of_device_id musb_dsps_of_match[]; @@ -136,6 +138,26 @@ struct dsps_glue { unsigned long last_timer; /* last timer data for each instance */ struct dsps_context context; + struct debugfs_regset32 regset; + struct dentry *dbgfs_root; +}; + +static const struct debugfs_reg32 dsps_musb_regs[] = { + { "revision", 0x00 }, + { "control", 0x14 }, + { "status", 0x18 }, + { "eoi", 0x24 }, + { "intr0_stat", 0x30 }, + { "intr1_stat", 0x34 }, + { "intr0_set", 0x38 }, + { "intr1_set", 0x3c }, + { "txmode", 0x70 }, + { "rxmode", 0x74 }, + { "autoreq", 0xd0 }, + { "srpfixtime", 0xd4 }, + { "tdown", 0xd8 }, + { "phy_utmi", 0xe0 }, + { "mode", 0xe8 }, }; static void dsps_musb_try_idle(struct musb *musb, unsigned long timeout) @@ -368,6 +390,30 @@ out: return ret; } +static int dsps_musb_dbg_init(struct musb *musb, struct dsps_glue *glue) +{ + struct dentry *root; + struct dentry *file; + char buf[128]; + + sprintf(buf, "%s.dsps", dev_name(musb->controller)); + root = debugfs_create_dir(buf, NULL); + if (!root) + return -ENOMEM; + glue->dbgfs_root = root; + + glue->regset.regs = dsps_musb_regs; + glue->regset.nregs = ARRAY_SIZE(dsps_musb_regs); + glue->regset.base = musb->ctrl_base; + + file = debugfs_create_regset32("regdump", S_IRUGO, root, &glue->regset); + if (!file) { + debugfs_remove_recursive(root); + return -ENOMEM; + } + return 0; +} + static int dsps_musb_init(struct musb *musb) { struct device *dev = musb->controller; @@ -377,6 +423,7 @@ static int dsps_musb_init(struct musb *musb) void __iomem *reg_base; struct resource *r; u32 rev, val; + int ret; r = platform_get_resource_byname(parent, IORESOURCE_MEM, "control"); if (!r) @@ -410,6 +457,10 @@ static int dsps_musb_init(struct musb *musb) val &= ~(1 << wrp->otg_disable); dsps_writel(musb->ctrl_base, wrp->phy_utmi, val); + ret = dsps_musb_dbg_init(musb, glue); + if (ret) + return ret; + return 0; } @@ -616,7 +667,7 @@ static int dsps_probe(struct platform_device *pdev) wrp = match->data; /* allocate glue */ - glue = kzalloc(sizeof(*glue), GFP_KERNEL); + glue = devm_kzalloc(&pdev->dev, sizeof(*glue), GFP_KERNEL); if (!glue) { dev_err(&pdev->dev, "unable to allocate glue memory\n"); return -ENOMEM; @@ -644,7 +695,6 @@ err3: pm_runtime_put(&pdev->dev); err2: pm_runtime_disable(&pdev->dev); - kfree(glue); return ret; } @@ -657,7 +707,9 @@ static int dsps_remove(struct platform_device *pdev) /* disable usbss clocks */ pm_runtime_put(&pdev->dev); pm_runtime_disable(&pdev->dev); - kfree(glue); + + debugfs_remove_recursive(glue->dbgfs_root); + return 0; } diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index abb38c3..eb06291 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -1694,7 +1694,8 @@ void musb_host_rx(struct musb *musb, u8 epnum) | MUSB_RXCSR_RXPKTRDY); musb_writew(hw_ep->regs, MUSB_RXCSR, val); -#if defined(CONFIG_USB_INVENTRA_DMA) || defined(CONFIG_USB_UX500_DMA) +#if defined(CONFIG_USB_INVENTRA_DMA) || defined(CONFIG_USB_UX500_DMA) || \ + defined(CONFIG_USB_TI_CPPI41_DMA) if (usb_pipeisoc(pipe)) { struct usb_iso_packet_descriptor *d; @@ -1707,10 +1708,30 @@ void musb_host_rx(struct musb *musb, u8 epnum) if (d->status != -EILSEQ && d->status != -EOVERFLOW) d->status = 0; - if (++qh->iso_idx >= urb->number_of_packets) + if (++qh->iso_idx >= urb->number_of_packets) { done = true; - else + } else { +#if defined(CONFIG_USB_TI_CPPI41_DMA) + struct dma_controller *c; + dma_addr_t *buf; + u32 length, ret; + + c = musb->dma_controller; + buf = (void *) + urb->iso_frame_desc[qh->iso_idx].offset + + (u32)urb->transfer_dma; + + length = + urb->iso_frame_desc[qh->iso_idx].length; + + val |= MUSB_RXCSR_DMAENAB; + musb_writew(hw_ep->regs, MUSB_RXCSR, val); + + ret = c->channel_program(dma, qh->maxpacket, + 0, (u32) buf, length); +#endif done = false; + } } else { /* done if urb buffer is full or short packet is recd */ @@ -1750,7 +1771,8 @@ void musb_host_rx(struct musb *musb, u8 epnum) } /* we are expecting IN packets */ -#if defined(CONFIG_USB_INVENTRA_DMA) || defined(CONFIG_USB_UX500_DMA) +#if defined(CONFIG_USB_INVENTRA_DMA) || defined(CONFIG_USB_UX500_DMA) || \ + defined(CONFIG_USB_TI_CPPI41_DMA) if (dma) { struct dma_controller *c; u16 rx_count; diff --git a/drivers/usb/musb/omap2430.c b/drivers/usb/musb/omap2430.c index 8aa59a2..d341c14 100644 --- a/drivers/usb/musb/omap2430.c +++ b/drivers/usb/musb/omap2430.c @@ -37,7 +37,7 @@ #include <linux/err.h> #include <linux/delay.h> #include <linux/usb/musb-omap.h> -#include <linux/usb/omap_control_usb.h> +#include <linux/phy/omap_control_phy.h> #include <linux/of_platform.h> #include "musb_core.h" diff --git a/drivers/usb/phy/Kconfig b/drivers/usb/phy/Kconfig index 7d1451d..416e0c8 100644 --- a/drivers/usb/phy/Kconfig +++ b/drivers/usb/phy/Kconfig @@ -75,27 +75,6 @@ config NOP_USB_XCEIV built-in with usb ip or which are autonomous and doesn't require any phy programming such as ISP1x04 etc. -config OMAP_CONTROL_USB - tristate "OMAP CONTROL USB Driver" - depends on ARCH_OMAP2PLUS || COMPILE_TEST - help - Enable this to add support for the USB part present in the control - module. This driver has API to power on the USB2 PHY and to write to - the mailbox. The mailbox is present only in omap4 and the register to - power on the USB2 PHY is present in OMAP4 and OMAP5. OMAP5 has an - additional register to power on USB3 PHY. - -config OMAP_USB3 - tristate "OMAP USB3 PHY Driver" - depends on ARCH_OMAP2PLUS || COMPILE_TEST - select OMAP_CONTROL_USB - select USB_PHY - help - Enable this to support the USB3 PHY that is part of SOC. This - driver takes care of all the PHY functionality apart from comparator. - This driver interacts with the "OMAP Control USB Driver" to power - on/off the PHY. - config AM335X_CONTROL_USB tristate diff --git a/drivers/usb/phy/Makefile b/drivers/usb/phy/Makefile index be58ada..f8fa719 100644 --- a/drivers/usb/phy/Makefile +++ b/drivers/usb/phy/Makefile @@ -13,11 +13,9 @@ obj-$(CONFIG_ISP1301_OMAP) += phy-isp1301-omap.o obj-$(CONFIG_MV_U3D_PHY) += phy-mv-u3d-usb.o obj-$(CONFIG_NOP_USB_XCEIV) += phy-generic.o obj-$(CONFIG_TAHVO_USB) += phy-tahvo.o -obj-$(CONFIG_OMAP_CONTROL_USB) += phy-omap-control.o obj-$(CONFIG_AM335X_CONTROL_USB) += phy-am335x-control.o obj-$(CONFIG_AM335X_PHY_USB) += phy-am335x.o obj-$(CONFIG_OMAP_OTG) += phy-omap-otg.o -obj-$(CONFIG_OMAP_USB3) += phy-omap-usb3.o obj-$(CONFIG_SAMSUNG_USBPHY) += phy-samsung-usb.o obj-$(CONFIG_SAMSUNG_USB2PHY) += phy-samsung-usb2.o obj-$(CONFIG_SAMSUNG_USB3PHY) += phy-samsung-usb3.o diff --git a/drivers/usb/phy/phy-fsm-usb.c b/drivers/usb/phy/phy-fsm-usb.c index 7aa314e..c47e5a6 100644 --- a/drivers/usb/phy/phy-fsm-usb.c +++ b/drivers/usb/phy/phy-fsm-usb.c @@ -317,10 +317,12 @@ int otg_statemachine(struct otg_fsm *fsm) otg_set_state(fsm, OTG_STATE_A_WAIT_VFALL); break; case OTG_STATE_A_HOST: - if ((!fsm->a_bus_req || fsm->a_suspend_req_inf) && + if (fsm->id || fsm->a_bus_drop) + otg_set_state(fsm, OTG_STATE_A_WAIT_VFALL); + else if ((!fsm->a_bus_req || fsm->a_suspend_req_inf) && fsm->otg->host->b_hnp_enable) otg_set_state(fsm, OTG_STATE_A_SUSPEND); - else if (fsm->id || !fsm->b_conn || fsm->a_bus_drop) + else if (!fsm->b_conn) otg_set_state(fsm, OTG_STATE_A_WAIT_BCON); else if (!fsm->a_vbus_vld) otg_set_state(fsm, OTG_STATE_A_VBUS_ERR); @@ -346,8 +348,7 @@ int otg_statemachine(struct otg_fsm *fsm) otg_set_state(fsm, OTG_STATE_A_VBUS_ERR); break; case OTG_STATE_A_WAIT_VFALL: - if (fsm->a_wait_vfall_tmout || fsm->id || fsm->a_bus_req || - (!fsm->a_sess_vld && !fsm->b_conn)) + if (fsm->a_wait_vfall_tmout) otg_set_state(fsm, OTG_STATE_A_IDLE); break; case OTG_STATE_A_VBUS_ERR: diff --git a/drivers/usb/phy/phy-msm-usb.c b/drivers/usb/phy/phy-msm-usb.c index d204f74..5b37b81 100644 --- a/drivers/usb/phy/phy-msm-usb.c +++ b/drivers/usb/phy/phy-msm-usb.c @@ -1428,7 +1428,8 @@ static int __init msm_otg_probe(struct platform_device *pdev) motg->phy.otg = kzalloc(sizeof(struct usb_otg), GFP_KERNEL); if (!motg->phy.otg) { dev_err(&pdev->dev, "unable to allocate msm_otg\n"); - return -ENOMEM; + ret = -ENOMEM; + goto free_motg; } motg->pdata = dev_get_platdata(&pdev->dev); diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c index b42897b..c42bdf0 100644 --- a/drivers/usb/phy/phy-mxs-usb.c +++ b/drivers/usb/phy/phy-mxs-usb.c @@ -1,5 +1,5 @@ /* - * Copyright 2012 Freescale Semiconductor, Inc. + * Copyright 2012-2013 Freescale Semiconductor, Inc. * Copyright (C) 2012 Marek Vasut <marex@denx.de> * on behalf of DENX Software Engineering GmbH * @@ -20,6 +20,9 @@ #include <linux/delay.h> #include <linux/err.h> #include <linux/io.h> +#include <linux/of_device.h> +#include <linux/regmap.h> +#include <linux/mfd/syscon.h> #define DRIVER_NAME "mxs_phy" @@ -28,18 +31,134 @@ #define HW_USBPHY_CTRL_SET 0x34 #define HW_USBPHY_CTRL_CLR 0x38 +#define HW_USBPHY_DEBUG_SET 0x54 +#define HW_USBPHY_DEBUG_CLR 0x58 + +#define HW_USBPHY_IP 0x90 +#define HW_USBPHY_IP_SET 0x94 +#define HW_USBPHY_IP_CLR 0x98 + #define BM_USBPHY_CTRL_SFTRST BIT(31) #define BM_USBPHY_CTRL_CLKGATE BIT(30) +#define BM_USBPHY_CTRL_ENAUTOSET_USBCLKS BIT(26) +#define BM_USBPHY_CTRL_ENAUTOCLR_USBCLKGATE BIT(25) +#define BM_USBPHY_CTRL_ENVBUSCHG_WKUP BIT(23) +#define BM_USBPHY_CTRL_ENIDCHG_WKUP BIT(22) +#define BM_USBPHY_CTRL_ENDPDMCHG_WKUP BIT(21) +#define BM_USBPHY_CTRL_ENAUTOCLR_PHY_PWD BIT(20) +#define BM_USBPHY_CTRL_ENAUTOCLR_CLKGATE BIT(19) +#define BM_USBPHY_CTRL_ENAUTO_PWRON_PLL BIT(18) #define BM_USBPHY_CTRL_ENUTMILEVEL3 BIT(15) #define BM_USBPHY_CTRL_ENUTMILEVEL2 BIT(14) #define BM_USBPHY_CTRL_ENHOSTDISCONDETECT BIT(1) +#define BM_USBPHY_IP_FIX (BIT(17) | BIT(18)) + +#define BM_USBPHY_DEBUG_CLKGATE BIT(30) + +/* Anatop Registers */ +#define ANADIG_ANA_MISC0 0x150 +#define ANADIG_ANA_MISC0_SET 0x154 +#define ANADIG_ANA_MISC0_CLR 0x158 + +#define ANADIG_USB1_VBUS_DET_STAT 0x1c0 +#define ANADIG_USB2_VBUS_DET_STAT 0x220 + +#define ANADIG_USB1_LOOPBACK_SET 0x1e4 +#define ANADIG_USB1_LOOPBACK_CLR 0x1e8 +#define ANADIG_USB2_LOOPBACK_SET 0x244 +#define ANADIG_USB2_LOOPBACK_CLR 0x248 + +#define BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG BIT(12) +#define BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG_SL BIT(11) + +#define BM_ANADIG_USB1_VBUS_DET_STAT_VBUS_VALID BIT(3) +#define BM_ANADIG_USB2_VBUS_DET_STAT_VBUS_VALID BIT(3) + +#define BM_ANADIG_USB1_LOOPBACK_UTMI_DIG_TST1 BIT(2) +#define BM_ANADIG_USB1_LOOPBACK_TSTI_TX_EN BIT(5) +#define BM_ANADIG_USB2_LOOPBACK_UTMI_DIG_TST1 BIT(2) +#define BM_ANADIG_USB2_LOOPBACK_TSTI_TX_EN BIT(5) + +#define to_mxs_phy(p) container_of((p), struct mxs_phy, phy) + +/* Do disconnection between PHY and controller without vbus */ +#define MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS BIT(0) + +/* + * The PHY will be in messy if there is a wakeup after putting + * bus to suspend (set portsc.suspendM) but before setting PHY to low + * power mode (set portsc.phcd). + */ +#define MXS_PHY_ABNORMAL_IN_SUSPEND BIT(1) + +/* + * The SOF sends too fast after resuming, it will cause disconnection + * between host and high speed device. + */ +#define MXS_PHY_SENDING_SOF_TOO_FAST BIT(2) + +/* + * IC has bug fixes logic, they include + * MXS_PHY_ABNORMAL_IN_SUSPEND and MXS_PHY_SENDING_SOF_TOO_FAST + * which are described at above flags, the RTL will handle it + * according to different versions. + */ +#define MXS_PHY_NEED_IP_FIX BIT(3) + +struct mxs_phy_data { + unsigned int flags; +}; + +static const struct mxs_phy_data imx23_phy_data = { + .flags = MXS_PHY_ABNORMAL_IN_SUSPEND | MXS_PHY_SENDING_SOF_TOO_FAST, +}; + +static const struct mxs_phy_data imx6q_phy_data = { + .flags = MXS_PHY_SENDING_SOF_TOO_FAST | + MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS | + MXS_PHY_NEED_IP_FIX, +}; + +static const struct mxs_phy_data imx6sl_phy_data = { + .flags = MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS | + MXS_PHY_NEED_IP_FIX, +}; + +static const struct of_device_id mxs_phy_dt_ids[] = { + { .compatible = "fsl,imx6sl-usbphy", .data = &imx6sl_phy_data, }, + { .compatible = "fsl,imx6q-usbphy", .data = &imx6q_phy_data, }, + { .compatible = "fsl,imx23-usbphy", .data = &imx23_phy_data, }, + { /* sentinel */ } +}; +MODULE_DEVICE_TABLE(of, mxs_phy_dt_ids); + struct mxs_phy { struct usb_phy phy; struct clk *clk; + const struct mxs_phy_data *data; + struct regmap *regmap_anatop; + int port_id; }; -#define to_mxs_phy(p) container_of((p), struct mxs_phy, phy) +static inline bool is_imx6q_phy(struct mxs_phy *mxs_phy) +{ + return mxs_phy->data == &imx6q_phy_data; +} + +static inline bool is_imx6sl_phy(struct mxs_phy *mxs_phy) +{ + return mxs_phy->data == &imx6sl_phy_data; +} + +/* + * PHY needs some 32K cycles to switch from 32K clock to + * bus (such as AHB/AXI, etc) clock. + */ +static void mxs_phy_clock_switch_delay(void) +{ + usleep_range(300, 400); +} static int mxs_phy_hw_init(struct mxs_phy *mxs_phy) { @@ -53,19 +172,105 @@ static int mxs_phy_hw_init(struct mxs_phy *mxs_phy) /* Power up the PHY */ writel(0, base + HW_USBPHY_PWD); - /* enable FS/LS device */ - writel(BM_USBPHY_CTRL_ENUTMILEVEL2 | - BM_USBPHY_CTRL_ENUTMILEVEL3, + /* + * USB PHY Ctrl Setting + * - Auto clock/power on + * - Enable full/low speed support + */ + writel(BM_USBPHY_CTRL_ENAUTOSET_USBCLKS | + BM_USBPHY_CTRL_ENAUTOCLR_USBCLKGATE | + BM_USBPHY_CTRL_ENAUTOCLR_PHY_PWD | + BM_USBPHY_CTRL_ENAUTOCLR_CLKGATE | + BM_USBPHY_CTRL_ENAUTO_PWRON_PLL | + BM_USBPHY_CTRL_ENUTMILEVEL2 | + BM_USBPHY_CTRL_ENUTMILEVEL3, base + HW_USBPHY_CTRL_SET); + if (mxs_phy->data->flags & MXS_PHY_NEED_IP_FIX) + writel(BM_USBPHY_IP_FIX, base + HW_USBPHY_IP_SET); + return 0; } +/* Return true if the vbus is there */ +static bool mxs_phy_get_vbus_status(struct mxs_phy *mxs_phy) +{ + unsigned int vbus_value; + + if (mxs_phy->port_id == 0) + regmap_read(mxs_phy->regmap_anatop, + ANADIG_USB1_VBUS_DET_STAT, + &vbus_value); + else if (mxs_phy->port_id == 1) + regmap_read(mxs_phy->regmap_anatop, + ANADIG_USB2_VBUS_DET_STAT, + &vbus_value); + + if (vbus_value & BM_ANADIG_USB1_VBUS_DET_STAT_VBUS_VALID) + return true; + else + return false; +} + +static void __mxs_phy_disconnect_line(struct mxs_phy *mxs_phy, bool disconnect) +{ + void __iomem *base = mxs_phy->phy.io_priv; + u32 reg; + + if (disconnect) + writel_relaxed(BM_USBPHY_DEBUG_CLKGATE, + base + HW_USBPHY_DEBUG_CLR); + + if (mxs_phy->port_id == 0) { + reg = disconnect ? ANADIG_USB1_LOOPBACK_SET + : ANADIG_USB1_LOOPBACK_CLR; + regmap_write(mxs_phy->regmap_anatop, reg, + BM_ANADIG_USB1_LOOPBACK_UTMI_DIG_TST1 | + BM_ANADIG_USB1_LOOPBACK_TSTI_TX_EN); + } else if (mxs_phy->port_id == 1) { + reg = disconnect ? ANADIG_USB2_LOOPBACK_SET + : ANADIG_USB2_LOOPBACK_CLR; + regmap_write(mxs_phy->regmap_anatop, reg, + BM_ANADIG_USB2_LOOPBACK_UTMI_DIG_TST1 | + BM_ANADIG_USB2_LOOPBACK_TSTI_TX_EN); + } + + if (!disconnect) + writel_relaxed(BM_USBPHY_DEBUG_CLKGATE, + base + HW_USBPHY_DEBUG_SET); + + /* Delay some time, and let Linestate be SE0 for controller */ + if (disconnect) + usleep_range(500, 1000); +} + +static void mxs_phy_disconnect_line(struct mxs_phy *mxs_phy, bool on) +{ + bool vbus_is_on = false; + + /* If the SoCs don't need to disconnect line without vbus, quit */ + if (!(mxs_phy->data->flags & MXS_PHY_DISCONNECT_LINE_WITHOUT_VBUS)) + return; + + /* If the SoCs don't have anatop, quit */ + if (!mxs_phy->regmap_anatop) + return; + + vbus_is_on = mxs_phy_get_vbus_status(mxs_phy); + + if (on && !vbus_is_on) + __mxs_phy_disconnect_line(mxs_phy, true); + else + __mxs_phy_disconnect_line(mxs_phy, false); + +} + static int mxs_phy_init(struct usb_phy *phy) { int ret; struct mxs_phy *mxs_phy = to_mxs_phy(phy); + mxs_phy_clock_switch_delay(); ret = clk_prepare_enable(mxs_phy->clk); if (ret) return ret; @@ -94,6 +299,7 @@ static int mxs_phy_suspend(struct usb_phy *x, int suspend) x->io_priv + HW_USBPHY_CTRL_SET); clk_disable_unprepare(mxs_phy->clk); } else { + mxs_phy_clock_switch_delay(); ret = clk_prepare_enable(mxs_phy->clk); if (ret) return ret; @@ -105,11 +311,28 @@ static int mxs_phy_suspend(struct usb_phy *x, int suspend) return 0; } +static int mxs_phy_set_wakeup(struct usb_phy *x, bool enabled) +{ + struct mxs_phy *mxs_phy = to_mxs_phy(x); + u32 value = BM_USBPHY_CTRL_ENVBUSCHG_WKUP | + BM_USBPHY_CTRL_ENDPDMCHG_WKUP | + BM_USBPHY_CTRL_ENIDCHG_WKUP; + if (enabled) { + mxs_phy_disconnect_line(mxs_phy, true); + writel_relaxed(value, x->io_priv + HW_USBPHY_CTRL_SET); + } else { + writel_relaxed(value, x->io_priv + HW_USBPHY_CTRL_CLR); + mxs_phy_disconnect_line(mxs_phy, false); + } + + return 0; +} + static int mxs_phy_on_connect(struct usb_phy *phy, enum usb_device_speed speed) { - dev_dbg(phy->dev, "%s speed device has connected\n", - (speed == USB_SPEED_HIGH) ? "high" : "non-high"); + dev_dbg(phy->dev, "%s device has connected\n", + (speed == USB_SPEED_HIGH) ? "HS" : "FS/LS"); if (speed == USB_SPEED_HIGH) writel(BM_USBPHY_CTRL_ENHOSTDISCONDETECT, @@ -121,8 +344,8 @@ static int mxs_phy_on_connect(struct usb_phy *phy, static int mxs_phy_on_disconnect(struct usb_phy *phy, enum usb_device_speed speed) { - dev_dbg(phy->dev, "%s speed device has disconnected\n", - (speed == USB_SPEED_HIGH) ? "high" : "non-high"); + dev_dbg(phy->dev, "%s device has disconnected\n", + (speed == USB_SPEED_HIGH) ? "HS" : "FS/LS"); if (speed == USB_SPEED_HIGH) writel(BM_USBPHY_CTRL_ENHOSTDISCONDETECT, @@ -138,6 +361,9 @@ static int mxs_phy_probe(struct platform_device *pdev) struct clk *clk; struct mxs_phy *mxs_phy; int ret; + const struct of_device_id *of_id = + of_match_device(mxs_phy_dt_ids, &pdev->dev); + struct device_node *np = pdev->dev.of_node; res = platform_get_resource(pdev, IORESOURCE_MEM, 0); base = devm_ioremap_resource(&pdev->dev, res); @@ -157,6 +383,22 @@ static int mxs_phy_probe(struct platform_device *pdev) return -ENOMEM; } + /* Some SoCs don't have anatop registers */ + if (of_get_property(np, "fsl,anatop", NULL)) { + mxs_phy->regmap_anatop = syscon_regmap_lookup_by_phandle + (np, "fsl,anatop"); + if (IS_ERR(mxs_phy->regmap_anatop)) { + dev_dbg(&pdev->dev, + "failed to find regmap for anatop\n"); + return PTR_ERR(mxs_phy->regmap_anatop); + } + } + + ret = of_alias_get_id(np, "usbphy"); + if (ret < 0) + dev_dbg(&pdev->dev, "failed to get alias id, errno %d\n", ret); + mxs_phy->port_id = ret; + mxs_phy->phy.io_priv = base; mxs_phy->phy.dev = &pdev->dev; mxs_phy->phy.label = DRIVER_NAME; @@ -166,11 +408,15 @@ static int mxs_phy_probe(struct platform_device *pdev) mxs_phy->phy.notify_connect = mxs_phy_on_connect; mxs_phy->phy.notify_disconnect = mxs_phy_on_disconnect; mxs_phy->phy.type = USB_PHY_TYPE_USB2; + mxs_phy->phy.set_wakeup = mxs_phy_set_wakeup; mxs_phy->clk = clk; + mxs_phy->data = of_id->data; platform_set_drvdata(pdev, mxs_phy); + device_set_wakeup_capable(&pdev->dev, true); + ret = usb_add_phy_dev(&mxs_phy->phy); if (ret) return ret; @@ -187,11 +433,46 @@ static int mxs_phy_remove(struct platform_device *pdev) return 0; } -static const struct of_device_id mxs_phy_dt_ids[] = { - { .compatible = "fsl,imx23-usbphy", }, - { /* sentinel */ } -}; -MODULE_DEVICE_TABLE(of, mxs_phy_dt_ids); +#ifdef CONFIG_PM_SLEEP +static void mxs_phy_enable_ldo_in_suspend(struct mxs_phy *mxs_phy, bool on) +{ + unsigned int reg = on ? ANADIG_ANA_MISC0_SET : ANADIG_ANA_MISC0_CLR; + + /* If the SoCs don't have anatop, quit */ + if (!mxs_phy->regmap_anatop) + return; + + if (is_imx6q_phy(mxs_phy)) + regmap_write(mxs_phy->regmap_anatop, reg, + BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG); + else if (is_imx6sl_phy(mxs_phy)) + regmap_write(mxs_phy->regmap_anatop, + reg, BM_ANADIG_ANA_MISC0_STOP_MODE_CONFIG_SL); +} + +static int mxs_phy_system_suspend(struct device *dev) +{ + struct mxs_phy *mxs_phy = dev_get_drvdata(dev); + + if (device_may_wakeup(dev)) + mxs_phy_enable_ldo_in_suspend(mxs_phy, true); + + return 0; +} + +static int mxs_phy_system_resume(struct device *dev) +{ + struct mxs_phy *mxs_phy = dev_get_drvdata(dev); + + if (device_may_wakeup(dev)) + mxs_phy_enable_ldo_in_suspend(mxs_phy, false); + + return 0; +} +#endif /* CONFIG_PM_SLEEP */ + +static SIMPLE_DEV_PM_OPS(mxs_phy_pm, mxs_phy_system_suspend, + mxs_phy_system_resume); static struct platform_driver mxs_phy_driver = { .probe = mxs_phy_probe, @@ -200,6 +481,7 @@ static struct platform_driver mxs_phy_driver = { .name = DRIVER_NAME, .owner = THIS_MODULE, .of_match_table = mxs_phy_dt_ids, + .pm = &mxs_phy_pm, }, }; diff --git a/drivers/usb/phy/phy-omap-usb3.c b/drivers/usb/phy/phy-omap-usb3.c deleted file mode 100644 index 0c6ba29..0000000 --- a/drivers/usb/phy/phy-omap-usb3.c +++ /dev/null @@ -1,361 +0,0 @@ -/* - * omap-usb3 - USB PHY, talking to dwc3 controller in OMAP. - * - * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * Author: Kishon Vijay Abraham I <kishon@ti.com> - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - */ - -#include <linux/module.h> -#include <linux/platform_device.h> -#include <linux/slab.h> -#include <linux/usb/omap_usb.h> -#include <linux/of.h> -#include <linux/clk.h> -#include <linux/err.h> -#include <linux/pm_runtime.h> -#include <linux/delay.h> -#include <linux/usb/omap_control_usb.h> -#include <linux/of_platform.h> - -#define PLL_STATUS 0x00000004 -#define PLL_GO 0x00000008 -#define PLL_CONFIGURATION1 0x0000000C -#define PLL_CONFIGURATION2 0x00000010 -#define PLL_CONFIGURATION3 0x00000014 -#define PLL_CONFIGURATION4 0x00000020 - -#define PLL_REGM_MASK 0x001FFE00 -#define PLL_REGM_SHIFT 0x9 -#define PLL_REGM_F_MASK 0x0003FFFF -#define PLL_REGM_F_SHIFT 0x0 -#define PLL_REGN_MASK 0x000001FE -#define PLL_REGN_SHIFT 0x1 -#define PLL_SELFREQDCO_MASK 0x0000000E -#define PLL_SELFREQDCO_SHIFT 0x1 -#define PLL_SD_MASK 0x0003FC00 -#define PLL_SD_SHIFT 0x9 -#define SET_PLL_GO 0x1 -#define PLL_TICOPWDN 0x10000 -#define PLL_LOCK 0x2 -#define PLL_IDLE 0x1 - -/* - * This is an Empirical value that works, need to confirm the actual - * value required for the USB3PHY_PLL_CONFIGURATION2.PLL_IDLE status - * to be correctly reflected in the USB3PHY_PLL_STATUS register. - */ -# define PLL_IDLE_TIME 100; - -struct usb_dpll_map { - unsigned long rate; - struct usb_dpll_params params; -}; - -static struct usb_dpll_map dpll_map[] = { - {12000000, {1250, 5, 4, 20, 0} }, /* 12 MHz */ - {16800000, {3125, 20, 4, 20, 0} }, /* 16.8 MHz */ - {19200000, {1172, 8, 4, 20, 65537} }, /* 19.2 MHz */ - {20000000, {1000, 7, 4, 10, 0} }, /* 20 MHz */ - {26000000, {1250, 12, 4, 20, 0} }, /* 26 MHz */ - {38400000, {3125, 47, 4, 20, 92843} }, /* 38.4 MHz */ -}; - -static struct usb_dpll_params *omap_usb3_get_dpll_params(unsigned long rate) -{ - int i; - - for (i = 0; i < ARRAY_SIZE(dpll_map); i++) { - if (rate == dpll_map[i].rate) - return &dpll_map[i].params; - } - - return NULL; -} - -static int omap_usb3_suspend(struct usb_phy *x, int suspend) -{ - struct omap_usb *phy = phy_to_omapusb(x); - int val; - int timeout = PLL_IDLE_TIME; - - if (suspend && !phy->is_suspended) { - val = omap_usb_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2); - val |= PLL_IDLE; - omap_usb_writel(phy->pll_ctrl_base, PLL_CONFIGURATION2, val); - - do { - val = omap_usb_readl(phy->pll_ctrl_base, PLL_STATUS); - if (val & PLL_TICOPWDN) - break; - udelay(1); - } while (--timeout); - - omap_control_usb_phy_power(phy->control_dev, 0); - - phy->is_suspended = 1; - } else if (!suspend && phy->is_suspended) { - phy->is_suspended = 0; - - val = omap_usb_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2); - val &= ~PLL_IDLE; - omap_usb_writel(phy->pll_ctrl_base, PLL_CONFIGURATION2, val); - - do { - val = omap_usb_readl(phy->pll_ctrl_base, PLL_STATUS); - if (!(val & PLL_TICOPWDN)) - break; - udelay(1); - } while (--timeout); - } - - return 0; -} - -static void omap_usb_dpll_relock(struct omap_usb *phy) -{ - u32 val; - unsigned long timeout; - - omap_usb_writel(phy->pll_ctrl_base, PLL_GO, SET_PLL_GO); - - timeout = jiffies + msecs_to_jiffies(20); - do { - val = omap_usb_readl(phy->pll_ctrl_base, PLL_STATUS); - if (val & PLL_LOCK) - break; - } while (!WARN_ON(time_after(jiffies, timeout))); -} - -static int omap_usb_dpll_lock(struct omap_usb *phy) -{ - u32 val; - unsigned long rate; - struct usb_dpll_params *dpll_params; - - rate = clk_get_rate(phy->sys_clk); - dpll_params = omap_usb3_get_dpll_params(rate); - if (!dpll_params) { - dev_err(phy->dev, - "No DPLL configuration for %lu Hz SYS CLK\n", rate); - return -EINVAL; - } - - val = omap_usb_readl(phy->pll_ctrl_base, PLL_CONFIGURATION1); - val &= ~PLL_REGN_MASK; - val |= dpll_params->n << PLL_REGN_SHIFT; - omap_usb_writel(phy->pll_ctrl_base, PLL_CONFIGURATION1, val); - - val = omap_usb_readl(phy->pll_ctrl_base, PLL_CONFIGURATION2); - val &= ~PLL_SELFREQDCO_MASK; - val |= dpll_params->freq << PLL_SELFREQDCO_SHIFT; - omap_usb_writel(phy->pll_ctrl_base, PLL_CONFIGURATION2, val); - - val = omap_usb_readl(phy->pll_ctrl_base, PLL_CONFIGURATION1); - val &= ~PLL_REGM_MASK; - val |= dpll_params->m << PLL_REGM_SHIFT; - omap_usb_writel(phy->pll_ctrl_base, PLL_CONFIGURATION1, val); - - val = omap_usb_readl(phy->pll_ctrl_base, PLL_CONFIGURATION4); - val &= ~PLL_REGM_F_MASK; - val |= dpll_params->mf << PLL_REGM_F_SHIFT; - omap_usb_writel(phy->pll_ctrl_base, PLL_CONFIGURATION4, val); - - val = omap_usb_readl(phy->pll_ctrl_base, PLL_CONFIGURATION3); - val &= ~PLL_SD_MASK; - val |= dpll_params->sd << PLL_SD_SHIFT; - omap_usb_writel(phy->pll_ctrl_base, PLL_CONFIGURATION3, val); - - omap_usb_dpll_relock(phy); - - return 0; -} - -static int omap_usb3_init(struct usb_phy *x) -{ - struct omap_usb *phy = phy_to_omapusb(x); - int ret; - - ret = omap_usb_dpll_lock(phy); - if (ret) - return ret; - - omap_control_usb_phy_power(phy->control_dev, 1); - - return 0; -} - -static int omap_usb3_probe(struct platform_device *pdev) -{ - struct omap_usb *phy; - struct resource *res; - struct device_node *node = pdev->dev.of_node; - struct device_node *control_node; - struct platform_device *control_pdev; - - if (!node) - return -EINVAL; - - phy = devm_kzalloc(&pdev->dev, sizeof(*phy), GFP_KERNEL); - if (!phy) { - dev_err(&pdev->dev, "unable to alloc mem for OMAP USB3 PHY\n"); - return -ENOMEM; - } - - res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pll_ctrl"); - phy->pll_ctrl_base = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(phy->pll_ctrl_base)) - return PTR_ERR(phy->pll_ctrl_base); - - phy->dev = &pdev->dev; - - phy->phy.dev = phy->dev; - phy->phy.label = "omap-usb3"; - phy->phy.init = omap_usb3_init; - phy->phy.set_suspend = omap_usb3_suspend; - phy->phy.type = USB_PHY_TYPE_USB3; - - phy->is_suspended = 1; - phy->wkupclk = devm_clk_get(phy->dev, "usb_phy_cm_clk32k"); - if (IS_ERR(phy->wkupclk)) { - dev_err(&pdev->dev, "unable to get usb_phy_cm_clk32k\n"); - return PTR_ERR(phy->wkupclk); - } - clk_prepare(phy->wkupclk); - - phy->optclk = devm_clk_get(phy->dev, "usb_otg_ss_refclk960m"); - if (IS_ERR(phy->optclk)) { - dev_err(&pdev->dev, "unable to get usb_otg_ss_refclk960m\n"); - return PTR_ERR(phy->optclk); - } - clk_prepare(phy->optclk); - - phy->sys_clk = devm_clk_get(phy->dev, "sys_clkin"); - if (IS_ERR(phy->sys_clk)) { - pr_err("%s: unable to get sys_clkin\n", __func__); - return -EINVAL; - } - - control_node = of_parse_phandle(node, "ctrl-module", 0); - if (!control_node) { - dev_err(&pdev->dev, "Failed to get control device phandle\n"); - return -EINVAL; - } - control_pdev = of_find_device_by_node(control_node); - if (!control_pdev) { - dev_err(&pdev->dev, "Failed to get control device\n"); - return -EINVAL; - } - - phy->control_dev = &control_pdev->dev; - - omap_control_usb_phy_power(phy->control_dev, 0); - usb_add_phy_dev(&phy->phy); - - platform_set_drvdata(pdev, phy); - - pm_runtime_enable(phy->dev); - pm_runtime_get(&pdev->dev); - - return 0; -} - -static int omap_usb3_remove(struct platform_device *pdev) -{ - struct omap_usb *phy = platform_get_drvdata(pdev); - - clk_unprepare(phy->wkupclk); - clk_unprepare(phy->optclk); - usb_remove_phy(&phy->phy); - if (!pm_runtime_suspended(&pdev->dev)) - pm_runtime_put(&pdev->dev); - pm_runtime_disable(&pdev->dev); - - return 0; -} - -#ifdef CONFIG_PM_RUNTIME - -static int omap_usb3_runtime_suspend(struct device *dev) -{ - struct platform_device *pdev = to_platform_device(dev); - struct omap_usb *phy = platform_get_drvdata(pdev); - - clk_disable(phy->wkupclk); - clk_disable(phy->optclk); - - return 0; -} - -static int omap_usb3_runtime_resume(struct device *dev) -{ - u32 ret = 0; - struct platform_device *pdev = to_platform_device(dev); - struct omap_usb *phy = platform_get_drvdata(pdev); - - ret = clk_enable(phy->optclk); - if (ret) { - dev_err(phy->dev, "Failed to enable optclk %d\n", ret); - goto err1; - } - - ret = clk_enable(phy->wkupclk); - if (ret) { - dev_err(phy->dev, "Failed to enable wkupclk %d\n", ret); - goto err2; - } - - return 0; - -err2: - clk_disable(phy->optclk); - -err1: - return ret; -} - -static const struct dev_pm_ops omap_usb3_pm_ops = { - SET_RUNTIME_PM_OPS(omap_usb3_runtime_suspend, omap_usb3_runtime_resume, - NULL) -}; - -#define DEV_PM_OPS (&omap_usb3_pm_ops) -#else -#define DEV_PM_OPS NULL -#endif - -#ifdef CONFIG_OF -static const struct of_device_id omap_usb3_id_table[] = { - { .compatible = "ti,omap-usb3" }, - {} -}; -MODULE_DEVICE_TABLE(of, omap_usb3_id_table); -#endif - -static struct platform_driver omap_usb3_driver = { - .probe = omap_usb3_probe, - .remove = omap_usb3_remove, - .driver = { - .name = "omap-usb3", - .owner = THIS_MODULE, - .pm = DEV_PM_OPS, - .of_match_table = of_match_ptr(omap_usb3_id_table), - }, -}; - -module_platform_driver(omap_usb3_driver); - -MODULE_ALIAS("platform: omap_usb3"); -MODULE_AUTHOR("Texas Instruments Inc."); -MODULE_DESCRIPTION("OMAP USB3 phy driver"); -MODULE_LICENSE("GPL v2"); diff --git a/drivers/usb/phy/phy-rcar-gen2-usb.c b/drivers/usb/phy/phy-rcar-gen2-usb.c index 551e0a6..388d89f 100644 --- a/drivers/usb/phy/phy-rcar-gen2-usb.c +++ b/drivers/usb/phy/phy-rcar-gen2-usb.c @@ -177,15 +177,15 @@ static int rcar_gen2_usb_phy_probe(struct platform_device *pdev) struct clk *clk; int retval; - pdata = dev_get_platdata(&pdev->dev); + pdata = dev_get_platdata(dev); if (!pdata) { dev_err(dev, "No platform data\n"); return -EINVAL; } - clk = devm_clk_get(&pdev->dev, "usbhs"); + clk = devm_clk_get(dev, "usbhs"); if (IS_ERR(clk)) { - dev_err(&pdev->dev, "Can't get the clock\n"); + dev_err(dev, "Can't get the clock\n"); return PTR_ERR(clk); } diff --git a/drivers/usb/phy/phy-twl6030-usb.c b/drivers/usb/phy/phy-twl6030-usb.c index 214172b..04778cf 100644 --- a/drivers/usb/phy/phy-twl6030-usb.c +++ b/drivers/usb/phy/phy-twl6030-usb.c @@ -27,7 +27,7 @@ #include <linux/io.h> #include <linux/usb/musb-omap.h> #include <linux/usb/phy_companion.h> -#include <linux/usb/omap_usb.h> +#include <linux/phy/omap_usb.h> #include <linux/i2c/twl.h> #include <linux/regulator/consumer.h> #include <linux/err.h> diff --git a/drivers/usb/phy/phy-ulpi.c b/drivers/usb/phy/phy-ulpi.c index 217339d..17ea3f2 100644 --- a/drivers/usb/phy/phy-ulpi.c +++ b/drivers/usb/phy/phy-ulpi.c @@ -47,6 +47,8 @@ struct ulpi_info { static struct ulpi_info ulpi_ids[] = { ULPI_INFO(ULPI_ID(0x04cc, 0x1504), "NXP ISP1504"), ULPI_INFO(ULPI_ID(0x0424, 0x0006), "SMSC USB331x"), + ULPI_INFO(ULPI_ID(0x0424, 0x0007), "SMSC USB3320"), + ULPI_INFO(ULPI_ID(0x0451, 0x1507), "TI TUSB1210"), }; static int ulpi_set_otg_flags(struct usb_phy *phy) diff --git a/drivers/usb/serial/ch341.c b/drivers/usb/serial/ch341.c index 82371f6..2d72aa3 100644 --- a/drivers/usb/serial/ch341.c +++ b/drivers/usb/serial/ch341.c @@ -323,11 +323,11 @@ static int ch341_open(struct tty_struct *tty, struct usb_serial_port *port) if (r) goto out; - dev_dbg(&port->dev, "%s - submitting interrupt urb", __func__); + dev_dbg(&port->dev, "%s - submitting interrupt urb\n", __func__); r = usb_submit_urb(port->interrupt_in_urb, GFP_KERNEL); if (r) { - dev_err(&port->dev, "%s - failed submitting interrupt urb," - " error %d\n", __func__, r); + dev_err(&port->dev, "%s - failed to submit interrupt urb: %d\n", + __func__, r); ch341_close(port); goto out; } diff --git a/drivers/usb/serial/cyberjack.c b/drivers/usb/serial/cyberjack.c index 0ac3b3b..2916dea 100644 --- a/drivers/usb/serial/cyberjack.c +++ b/drivers/usb/serial/cyberjack.c @@ -220,7 +220,7 @@ static int cyberjack_write(struct tty_struct *tty, result = usb_submit_urb(port->write_urb, GFP_ATOMIC); if (result) { dev_err(&port->dev, - "%s - failed submitting write urb, error %d", + "%s - failed submitting write urb, error %d\n", __func__, result); /* Throw away data. No better idea what to do with it. */ priv->wrfilled = 0; diff --git a/drivers/usb/serial/cypress_m8.c b/drivers/usb/serial/cypress_m8.c index bccb122..01bf533 100644 --- a/drivers/usb/serial/cypress_m8.c +++ b/drivers/usb/serial/cypress_m8.c @@ -279,7 +279,7 @@ static int analyze_baud_rate(struct usb_serial_port *port, speed_t new_rate) * the generic firmware, but are not used with * NMEA and SiRF protocols */ dev_dbg(&port->dev, - "%s - failed setting baud rate, unsupported speed of %d on Earthmate GPS", + "%s - failed setting baud rate, unsupported speed of %d on Earthmate GPS\n", __func__, new_rate); return -1; } @@ -1224,7 +1224,6 @@ static void cypress_write_int_callback(struct urb *urb) struct usb_serial_port *port = urb->context; struct cypress_private *priv = usb_get_serial_port_data(port); struct device *dev = &urb->dev->dev; - int result; int status = urb->status; switch (status) { @@ -1239,21 +1238,9 @@ static void cypress_write_int_callback(struct urb *urb) __func__, status); priv->write_urb_in_use = 0; return; - case -EPIPE: /* no break needed; clear halt and resubmit */ - if (!priv->comm_is_ok) - break; - usb_clear_halt(port->serial->dev, 0x02); - /* error in the urb, so we have to resubmit it */ - dev_dbg(dev, "%s - nonzero write bulk status received: %d\n", - __func__, status); - port->interrupt_out_urb->transfer_buffer_length = 1; - result = usb_submit_urb(port->interrupt_out_urb, GFP_ATOMIC); - if (!result) - return; - dev_err(dev, "%s - failed resubmitting write urb, error %d\n", - __func__, result); - cypress_set_dead(port); - break; + case -EPIPE: + /* Cannot call usb_clear_halt while in_interrupt */ + /* FALLTHROUGH */ default: dev_err(dev, "%s - unexpected nonzero write status received: %d\n", __func__, status); diff --git a/drivers/usb/serial/generic.c b/drivers/usb/serial/generic.c index b63ce02..1bd1922 100644 --- a/drivers/usb/serial/generic.c +++ b/drivers/usb/serial/generic.c @@ -332,9 +332,9 @@ void usb_serial_generic_process_read_urb(struct urb *urb) * stuff like 3G modems, so shortcircuit it in the 99.9999999% of * cases where the USB serial is not a console anyway. */ - if (!port->port.console || !port->sysrq) + if (!port->port.console || !port->sysrq) { tty_insert_flip_string(&port->port, ch, urb->actual_length); - else { + } else { for (i = 0; i < urb->actual_length; i++, ch++) { if (!usb_serial_handle_sysrq_char(port, *ch)) tty_insert_flip_char(&port->port, *ch, TTY_NORMAL); @@ -359,24 +359,38 @@ void usb_serial_generic_read_bulk_callback(struct urb *urb) dev_dbg(&port->dev, "%s - urb %d, len %d\n", __func__, i, urb->actual_length); - - if (urb->status) { - dev_dbg(&port->dev, "%s - non-zero urb status: %d\n", - __func__, urb->status); + switch (urb->status) { + case 0: + break; + case -ENOENT: + case -ECONNRESET: + case -ESHUTDOWN: + dev_dbg(&port->dev, "%s - urb stopped: %d\n", + __func__, urb->status); return; + case -EPIPE: + dev_err(&port->dev, "%s - urb stopped: %d\n", + __func__, urb->status); + return; + default: + dev_err(&port->dev, "%s - nonzero urb status: %d\n", + __func__, urb->status); + goto resubmit; } usb_serial_debug_data(&port->dev, __func__, urb->actual_length, data); port->serial->type->process_read_urb(urb); +resubmit: /* Throttle the device if requested by tty */ spin_lock_irqsave(&port->lock, flags); port->throttled = port->throttle_req; if (!port->throttled) { spin_unlock_irqrestore(&port->lock, flags); usb_serial_generic_submit_read_urb(port, i, GFP_ATOMIC); - } else + } else { spin_unlock_irqrestore(&port->lock, flags); + } } EXPORT_SYMBOL_GPL(usb_serial_generic_read_bulk_callback); @@ -384,29 +398,38 @@ void usb_serial_generic_write_bulk_callback(struct urb *urb) { unsigned long flags; struct usb_serial_port *port = urb->context; - int status = urb->status; int i; - for (i = 0; i < ARRAY_SIZE(port->write_urbs); ++i) + for (i = 0; i < ARRAY_SIZE(port->write_urbs); ++i) { if (port->write_urbs[i] == urb) break; - + } spin_lock_irqsave(&port->lock, flags); port->tx_bytes -= urb->transfer_buffer_length; set_bit(i, &port->write_urbs_free); spin_unlock_irqrestore(&port->lock, flags); - if (status) { - dev_dbg(&port->dev, "%s - non-zero urb status: %d\n", - __func__, status); - - spin_lock_irqsave(&port->lock, flags); - kfifo_reset_out(&port->write_fifo); - spin_unlock_irqrestore(&port->lock, flags); - } else { - usb_serial_generic_write_start(port, GFP_ATOMIC); + switch (urb->status) { + case 0: + break; + case -ENOENT: + case -ECONNRESET: + case -ESHUTDOWN: + dev_dbg(&port->dev, "%s - urb stopped: %d\n", + __func__, urb->status); + return; + case -EPIPE: + dev_err_console(port, "%s - urb stopped: %d\n", + __func__, urb->status); + return; + default: + dev_err_console(port, "%s - nonzero urb status: %d\n", + __func__, urb->status); + goto resubmit; } +resubmit: + usb_serial_generic_write_start(port, GFP_ATOMIC); usb_serial_port_softint(port); } EXPORT_SYMBOL_GPL(usb_serial_generic_write_bulk_callback); diff --git a/drivers/usb/serial/iuu_phoenix.c b/drivers/usb/serial/iuu_phoenix.c index d00dae1..5ad4a0f 100644 --- a/drivers/usb/serial/iuu_phoenix.c +++ b/drivers/usb/serial/iuu_phoenix.c @@ -1151,7 +1151,7 @@ static ssize_t vcc_mode_store(struct device *dev, goto fail_store_vcc_mode; } - dev_dbg(dev, "%s: setting vcc_mode = %ld", __func__, v); + dev_dbg(dev, "%s: setting vcc_mode = %ld\n", __func__, v); if ((v != 3) && (v != 5)) { dev_err(dev, "%s - vcc_mode %ld is invalid\n", __func__, v); diff --git a/drivers/usb/serial/keyspan.c b/drivers/usb/serial/keyspan.c index 265c677..d3acaea 100644 --- a/drivers/usb/serial/keyspan.c +++ b/drivers/usb/serial/keyspan.c @@ -397,17 +397,6 @@ static void usa26_instat_callback(struct urb *urb) msg = (struct keyspan_usa26_portStatusMessage *)data; -#if 0 - dev_dbg(&urb->dev->dev, - "%s - port status: port %d cts %d dcd %d dsr %d ri %d toff %d txoff %d rxen %d cr %d", - __func__, msg->port, msg->hskia_cts, msg->gpia_dcd, msg->dsr, - msg->ri, msg->_txOff, msg->_txXoff, msg->rxEnabled, - msg->controlResponse); -#endif - - /* Now do something useful with the data */ - - /* Check port number from message and retrieve private data */ if (msg->port >= serial->num_ports) { dev_dbg(&urb->dev->dev, "%s - Unexpected port number %d\n", __func__, msg->port); @@ -523,9 +512,6 @@ static void usa28_instat_callback(struct urb *urb) goto exit; } - /*dev_dbg(&urb->dev->dev, "%s %12ph", __func__, data);*/ - - /* Now do something useful with the data */ msg = (struct keyspan_usa28_portStatusMessage *)data; /* Check port number from message and retrieve private data */ @@ -605,9 +591,6 @@ static void usa49_instat_callback(struct urb *urb) goto exit; } - /*dev_dbg(&urb->dev->dev, "%s: %11ph", __func__, data);*/ - - /* Now do something useful with the data */ msg = (struct keyspan_usa49_portStatusMessage *)data; /* Check port number from message and retrieve private data */ @@ -1793,12 +1776,6 @@ static int keyspan_usa28_send_setup(struct usb_serial *serial, err = usb_submit_urb(this_urb, GFP_ATOMIC); if (err != 0) dev_dbg(&port->dev, "%s - usb_submit_urb(setup) failed\n", __func__); -#if 0 - else { - dev_dbg(&port->dev, "%s - usb_submit_urb(setup) OK %d bytes\n", __func__, - this_urb->transfer_buffer_length); - } -#endif return 0; } @@ -1976,13 +1953,6 @@ static int keyspan_usa49_send_setup(struct usb_serial *serial, err = usb_submit_urb(this_urb, GFP_ATOMIC); if (err != 0) dev_dbg(&port->dev, "%s - usb_submit_urb(setup) failed (%d)\n", __func__, err); -#if 0 - else { - dev_dbg(&port->dev, "%s - usb_submit_urb(%d) OK %d bytes (end %d)\n", __func__, - outcont_urb, this_urb->transfer_buffer_length, - usb_pipeendpoint(this_urb->pipe)); - } -#endif return 0; } diff --git a/drivers/usb/serial/keyspan_pda.c b/drivers/usb/serial/keyspan_pda.c index e972412..742d827 100644 --- a/drivers/usb/serial/keyspan_pda.c +++ b/drivers/usb/serial/keyspan_pda.c @@ -189,7 +189,7 @@ exit: retval = usb_submit_urb(urb, GFP_ATOMIC); if (retval) dev_err(&port->dev, - "%s - usb_submit_urb failed with result %d", + "%s - usb_submit_urb failed with result %d\n", __func__, retval); } diff --git a/drivers/usb/serial/kl5kusb105.c b/drivers/usb/serial/kl5kusb105.c index c88cc49..d7440b7 100644 --- a/drivers/usb/serial/kl5kusb105.c +++ b/drivers/usb/serial/kl5kusb105.c @@ -201,7 +201,7 @@ static int klsi_105_get_line_state(struct usb_serial_port *port, else { status = get_unaligned_le16(status_buf); - dev_info(&port->serial->dev->dev, "read status %x %x", + dev_info(&port->serial->dev->dev, "read status %x %x\n", status_buf[0], status_buf[1]); *line_state_p = klsi_105_status2linestate(status); @@ -464,7 +464,7 @@ static void klsi_105_set_termios(struct tty_struct *tty, priv->cfg.baudrate = kl5kusb105a_sio_b115200; break; default: - dev_dbg(dev, "KLSI USB->Serial converter: unsupported baudrate request, using default of 9600"); + dev_dbg(dev, "unsupported baudrate, using 9600\n"); priv->cfg.baudrate = kl5kusb105a_sio_b9600; baud = 9600; break; diff --git a/drivers/usb/serial/kobil_sct.c b/drivers/usb/serial/kobil_sct.c index 618c1c1..fee2423 100644 --- a/drivers/usb/serial/kobil_sct.c +++ b/drivers/usb/serial/kobil_sct.c @@ -557,7 +557,8 @@ static int kobil_ioctl(struct tty_struct *tty, ); dev_dbg(&port->dev, - "%s - Send reset_all_queues (FLUSH) URB returns: %i", __func__, result); + "%s - Send reset_all_queues (FLUSH) URB returns: %i\n", + __func__, result); kfree(transfer_buffer); return (result < 0) ? -EIO: 0; default: diff --git a/drivers/usb/serial/mos7720.c b/drivers/usb/serial/mos7720.c index 4eb2772..dfd728a 100644 --- a/drivers/usb/serial/mos7720.c +++ b/drivers/usb/serial/mos7720.c @@ -209,7 +209,7 @@ static int write_mos_reg(struct usb_serial *serial, unsigned int serial_portnum, index, NULL, 0, MOS_WDR_TIMEOUT); if (status < 0) dev_err(&usbdev->dev, - "mos7720: usb_control_msg() failed: %d", status); + "mos7720: usb_control_msg() failed: %d\n", status); return status; } @@ -240,7 +240,7 @@ static int read_mos_reg(struct usb_serial *serial, unsigned int serial_portnum, *data = *buf; else if (status < 0) dev_err(&usbdev->dev, - "mos7720: usb_control_msg() failed: %d", status); + "mos7720: usb_control_msg() failed: %d\n", status); kfree(buf); return status; @@ -399,7 +399,7 @@ static int write_parport_reg_nonblock(struct mos7715_parport *mos_parport, &mos_parport->deferred_urbs); spin_unlock_irqrestore(&mos_parport->listlock, flags); tasklet_schedule(&mos_parport->urb_tasklet); - dev_dbg(&usbdev->dev, "tasklet scheduled"); + dev_dbg(&usbdev->dev, "tasklet scheduled\n"); return 0; } @@ -418,7 +418,7 @@ static int write_parport_reg_nonblock(struct mos7715_parport *mos_parport, mutex_unlock(&serial->disc_mutex); if (ret_val) { dev_err(&usbdev->dev, - "%s: submit_urb() failed: %d", __func__, ret_val); + "%s: submit_urb() failed: %d\n", __func__, ret_val); spin_lock_irqsave(&mos_parport->listlock, flags); list_del(&urbtrack->urblist_entry); spin_unlock_irqrestore(&mos_parport->listlock, flags); @@ -656,7 +656,7 @@ static size_t parport_mos7715_write_compat(struct parport *pp, parport_epilogue(pp); if (retval) { dev_err(&mos_parport->serial->dev->dev, - "mos7720: usb_bulk_msg() failed: %d", retval); + "mos7720: usb_bulk_msg() failed: %d\n", retval); return 0; } return actual_len; @@ -875,7 +875,7 @@ static void mos7715_interrupt_callback(struct urb *urb) if (!(iir & 0x01)) { /* serial port interrupt pending */ switch (iir & 0x0f) { case SERIAL_IIR_RLS: - dev_dbg(dev, "Serial Port: Receiver status error or address bit detected in 9-bit mode\n\n"); + dev_dbg(dev, "Serial Port: Receiver status error or address bit detected in 9-bit mode\n"); break; case SERIAL_IIR_CTI: dev_dbg(dev, "Serial Port: Receiver time out\n"); diff --git a/drivers/usb/serial/mos7840.c b/drivers/usb/serial/mos7840.c index e9d967f..393be56 100644 --- a/drivers/usb/serial/mos7840.c +++ b/drivers/usb/serial/mos7840.c @@ -522,11 +522,11 @@ static void mos7840_set_led_callback(struct urb *urb) case -ENOENT: case -ESHUTDOWN: /* This urb is terminated, clean up */ - dev_dbg(&urb->dev->dev, "%s - urb shutting down with status: %d", + dev_dbg(&urb->dev->dev, "%s - urb shutting down: %d\n", __func__, urb->status); break; default: - dev_dbg(&urb->dev->dev, "%s - nonzero urb status received: %d", + dev_dbg(&urb->dev->dev, "%s - nonzero urb status: %d\n", __func__, urb->status); } } diff --git a/drivers/usb/serial/quatech2.c b/drivers/usb/serial/quatech2.c index 7725ed2..504f5bf 100644 --- a/drivers/usb/serial/quatech2.c +++ b/drivers/usb/serial/quatech2.c @@ -372,7 +372,7 @@ static int qt2_open(struct tty_struct *tty, struct usb_serial_port *port) device_port, data, 2, QT2_USB_TIMEOUT); if (status < 0) { - dev_err(&port->dev, "%s - open port failed %i", __func__, + dev_err(&port->dev, "%s - open port failed %i\n", __func__, status); kfree(data); return status; diff --git a/drivers/usb/serial/spcp8x5.c b/drivers/usb/serial/spcp8x5.c index 4ec04f7..ef0dbf0 100644 --- a/drivers/usb/serial/spcp8x5.c +++ b/drivers/usb/serial/spcp8x5.c @@ -220,9 +220,9 @@ static int spcp8x5_get_msr(struct usb_serial_port *port, u8 *status) GET_UART_STATUS, GET_UART_STATUS_TYPE, 0, GET_UART_STATUS_MSR, buf, 1, 100); if (ret < 0) - dev_err(&port->dev, "failed to get modem status: %d", ret); + dev_err(&port->dev, "failed to get modem status: %d\n", ret); - dev_dbg(&port->dev, "0xc0:0x22:0:6 %d - 0x02%x", ret, *buf); + dev_dbg(&port->dev, "0xc0:0x22:0:6 %d - 0x02%x\n", ret, *buf); *status = *buf; kfree(buf); @@ -342,8 +342,7 @@ static void spcp8x5_set_termios(struct tty_struct *tty, case 1000000: buf[0] = 0x0b; break; default: - dev_err(&port->dev, "spcp825 driver does not support the " - "baudrate requested, using default of 9600.\n"); + dev_err(&port->dev, "unsupported baudrate, using 9600\n"); } /* Set Data Length : 00:5bit, 01:6bit, 10:7bit, 11:8bit */ diff --git a/drivers/usb/serial/symbolserial.c b/drivers/usb/serial/symbolserial.c index 9fa7dd4..8fceec7 100644 --- a/drivers/usb/serial/symbolserial.c +++ b/drivers/usb/serial/symbolserial.c @@ -74,9 +74,7 @@ static void symbol_int_callback(struct urb *urb) tty_insert_flip_string(&port->port, &data[1], data_length); tty_flip_buffer_push(&port->port); } else { - dev_dbg(&port->dev, - "Improper amount of data received from the device, " - "%d bytes", urb->actual_length); + dev_dbg(&port->dev, "%s - short packet\n", __func__); } exit: diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index ec7cea5..3dd3ff8 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -293,7 +293,7 @@ static int ti_startup(struct usb_serial *serial) int status; dev_dbg(&dev->dev, - "%s - product 0x%4X, num configurations %d, configuration value %d", + "%s - product 0x%4X, num configurations %d, configuration value %d\n", __func__, le16_to_cpu(dev->descriptor.idProduct), dev->descriptor.bNumConfigurations, dev->actconfig->desc.bConfigurationValue); @@ -803,7 +803,7 @@ static void ti_set_termios(struct tty_struct *tty, tty_encode_baud_rate(tty, baud, baud); dev_dbg(&port->dev, - "%s - BaudRate=%d, wBaudRate=%d, wFlags=0x%04X, bDataBits=%d, bParity=%d, bStopBits=%d, cXon=%d, cXoff=%d, bUartMode=%d", + "%s - BaudRate=%d, wBaudRate=%d, wFlags=0x%04X, bDataBits=%d, bParity=%d, bStopBits=%d, cXon=%d, cXoff=%d, bUartMode=%d\n", __func__, baud, config->wBaudRate, config->wFlags, config->bDataBits, config->bParity, config->bStopBits, config->cXon, config->cXoff, config->bUartMode); diff --git a/drivers/usb/serial/usb-serial.c b/drivers/usb/serial/usb-serial.c index 7c9dc28..81fc0df 100644 --- a/drivers/usb/serial/usb-serial.c +++ b/drivers/usb/serial/usb-serial.c @@ -868,7 +868,7 @@ static int usb_serial_probe(struct usb_interface *interface, max_endpoints = max(max_endpoints, (int)serial->num_ports); serial->num_port_pointers = max_endpoints; - dev_dbg(ddev, "setting up %d port structures for this device", max_endpoints); + dev_dbg(ddev, "setting up %d port structure(s)\n", max_endpoints); for (i = 0; i < max_endpoints; ++i) { port = kzalloc(sizeof(struct usb_serial_port), GFP_KERNEL); if (!port) @@ -923,9 +923,8 @@ static int usb_serial_probe(struct usb_interface *interface, port = serial->port[i]; if (kfifo_alloc(&port->write_fifo, PAGE_SIZE, GFP_KERNEL)) goto probe_error; - buffer_size = serial->type->bulk_out_size; - if (!buffer_size) - buffer_size = usb_endpoint_maxp(endpoint); + buffer_size = max_t(int, serial->type->bulk_out_size, + usb_endpoint_maxp(endpoint)); port->bulk_out_size = buffer_size; port->bulk_out_endpointAddress = endpoint->bEndpointAddress; @@ -1034,7 +1033,7 @@ static int usb_serial_probe(struct usb_interface *interface, for (i = 0; i < num_ports; ++i) { port = serial->port[i]; dev_set_name(&port->dev, "ttyUSB%d", port->minor); - dev_dbg(ddev, "registering %s", dev_name(&port->dev)); + dev_dbg(ddev, "registering %s\n", dev_name(&port->dev)); device_enable_async_suspend(&port->dev); retval = device_add(&port->dev); @@ -1161,9 +1160,9 @@ static int usb_serial_reset_resume(struct usb_interface *intf) usb_serial_unpoison_port_urbs(serial); serial->suspending = 0; - if (serial->type->reset_resume) + if (serial->type->reset_resume) { rv = serial->type->reset_resume(serial); - else { + } else { rv = -EOPNOTSUPP; intf->needs_binding = 1; } @@ -1338,9 +1337,9 @@ static int usb_serial_register(struct usb_serial_driver *driver) if (retval) { pr_err("problem %d when registering driver %s\n", retval, driver->description); list_del(&driver->driver_list); - } else + } else { pr_info("USB Serial support registered for %s\n", driver->description); - + } mutex_unlock(&table_lock); return retval; } diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig index 1dd0604..13b5bfb 100644 --- a/drivers/usb/storage/Kconfig +++ b/drivers/usb/storage/Kconfig @@ -204,7 +204,7 @@ config USB_STORAGE_ENE_UB6250 config USB_UAS tristate "USB Attached SCSI" - depends on SCSI && BROKEN + depends on SCSI && USB_STORAGE help The USB Attached SCSI protocol is supported by some USB storage devices. It permits higher performance by supporting diff --git a/drivers/usb/storage/uas-detect.h b/drivers/usb/storage/uas-detect.h new file mode 100644 index 0000000..bb05b98 --- /dev/null +++ b/drivers/usb/storage/uas-detect.h @@ -0,0 +1,96 @@ +#include <linux/usb.h> +#include <linux/usb/hcd.h> +#include "usb.h" + +static int uas_is_interface(struct usb_host_interface *intf) +{ + return (intf->desc.bInterfaceClass == USB_CLASS_MASS_STORAGE && + intf->desc.bInterfaceSubClass == USB_SC_SCSI && + intf->desc.bInterfaceProtocol == USB_PR_UAS); +} + +static int uas_isnt_supported(struct usb_device *udev) +{ + struct usb_hcd *hcd = bus_to_hcd(udev->bus); + + dev_warn(&udev->dev, "The driver for the USB controller %s does not " + "support scatter-gather which is\n", + hcd->driver->description); + dev_warn(&udev->dev, "required by the UAS driver. Please try an" + "alternative USB controller if you wish to use UAS.\n"); + return -ENODEV; +} + +static int uas_find_uas_alt_setting(struct usb_interface *intf) +{ + int i; + struct usb_device *udev = interface_to_usbdev(intf); + int sg_supported = udev->bus->sg_tablesize != 0; + + for (i = 0; i < intf->num_altsetting; i++) { + struct usb_host_interface *alt = &intf->altsetting[i]; + + if (uas_is_interface(alt)) { + if (!sg_supported) + return uas_isnt_supported(udev); + return alt->desc.bAlternateSetting; + } + } + + return -ENODEV; +} + +static int uas_find_endpoints(struct usb_host_interface *alt, + struct usb_host_endpoint *eps[]) +{ + struct usb_host_endpoint *endpoint = alt->endpoint; + unsigned i, n_endpoints = alt->desc.bNumEndpoints; + + for (i = 0; i < n_endpoints; i++) { + unsigned char *extra = endpoint[i].extra; + int len = endpoint[i].extralen; + while (len >= 3) { + if (extra[1] == USB_DT_PIPE_USAGE) { + unsigned pipe_id = extra[2]; + if (pipe_id > 0 && pipe_id < 5) + eps[pipe_id - 1] = &endpoint[i]; + break; + } + len -= extra[0]; + extra += extra[0]; + } + } + + if (!eps[0] || !eps[1] || !eps[2] || !eps[3]) + return -ENODEV; + + return 0; +} + +static int uas_use_uas_driver(struct usb_interface *intf, + const struct usb_device_id *id) +{ + struct usb_host_endpoint *eps[4] = { }; + struct usb_device *udev = interface_to_usbdev(intf); + struct usb_hcd *hcd = bus_to_hcd(udev->bus); + unsigned long flags = id->driver_info; + int r, alt; + + usb_stor_adjust_quirks(udev, &flags); + + if (flags & US_FL_IGNORE_UAS) + return 0; + + if (udev->speed >= USB_SPEED_SUPER && !hcd->can_do_streams) + return 0; + + alt = uas_find_uas_alt_setting(intf); + if (alt < 0) + return 0; + + r = uas_find_endpoints(&intf->altsetting[alt], eps); + if (r < 0) + return 0; + + return 1; +} diff --git a/drivers/usb/storage/uas.c b/drivers/usb/storage/uas.c index d966b59..a7ac97c 100644 --- a/drivers/usb/storage/uas.c +++ b/drivers/usb/storage/uas.c @@ -2,6 +2,7 @@ * USB Attached SCSI * Note that this is not the same as the USB Mass Storage driver * + * Copyright Hans de Goede <hdegoede@redhat.com> for Red Hat, Inc. 2013 * Copyright Matthew Wilcox for Intel Corp, 2010 * Copyright Sarah Sharp for Intel Corp, 2010 * @@ -13,17 +14,21 @@ #include <linux/types.h> #include <linux/module.h> #include <linux/usb.h> +#include <linux/usb_usual.h> #include <linux/usb/hcd.h> #include <linux/usb/storage.h> #include <linux/usb/uas.h> #include <scsi/scsi.h> +#include <scsi/scsi_eh.h> #include <scsi/scsi_dbg.h> #include <scsi/scsi_cmnd.h> #include <scsi/scsi_device.h> #include <scsi/scsi_host.h> #include <scsi/scsi_tcq.h> +#include "uas-detect.h" + /* * The r00-r01c specs define this version of the SENSE IU data structure. * It's still in use by several different firmware releases. @@ -45,12 +50,17 @@ struct uas_dev_info { struct usb_anchor sense_urbs; struct usb_anchor data_urbs; int qdepth, resetting; - struct response_ui response; + struct response_iu response; unsigned cmd_pipe, status_pipe, data_in_pipe, data_out_pipe; unsigned use_streams:1; unsigned uas_sense_old:1; + unsigned running_task:1; + unsigned shutdown:1; struct scsi_cmnd *cmnd; spinlock_t lock; + struct work_struct work; + struct list_head inflight_list; + struct list_head dead_list; }; enum { @@ -85,103 +95,117 @@ static int uas_submit_urbs(struct scsi_cmnd *cmnd, struct uas_dev_info *devinfo, gfp_t gfp); static void uas_do_work(struct work_struct *work); static int uas_try_complete(struct scsi_cmnd *cmnd, const char *caller); +static void uas_free_streams(struct uas_dev_info *devinfo); +static void uas_log_cmd_state(struct scsi_cmnd *cmnd, const char *caller); -static DECLARE_WORK(uas_work, uas_do_work); -static DEFINE_SPINLOCK(uas_work_lock); -static LIST_HEAD(uas_work_list); - +/* Must be called with devinfo->lock held, will temporary unlock the lock */ static void uas_unlink_data_urbs(struct uas_dev_info *devinfo, - struct uas_cmd_info *cmdinfo) + struct uas_cmd_info *cmdinfo, + unsigned long *lock_flags) { - unsigned long flags; - /* * The UNLINK_DATA_URBS flag makes sure uas_try_complete * (called by urb completion) doesn't release cmdinfo * underneath us. */ - spin_lock_irqsave(&devinfo->lock, flags); cmdinfo->state |= UNLINK_DATA_URBS; - spin_unlock_irqrestore(&devinfo->lock, flags); + spin_unlock_irqrestore(&devinfo->lock, *lock_flags); if (cmdinfo->data_in_urb) usb_unlink_urb(cmdinfo->data_in_urb); if (cmdinfo->data_out_urb) usb_unlink_urb(cmdinfo->data_out_urb); - spin_lock_irqsave(&devinfo->lock, flags); + spin_lock_irqsave(&devinfo->lock, *lock_flags); cmdinfo->state &= ~UNLINK_DATA_URBS; - spin_unlock_irqrestore(&devinfo->lock, flags); } static void uas_do_work(struct work_struct *work) { + struct uas_dev_info *devinfo = + container_of(work, struct uas_dev_info, work); struct uas_cmd_info *cmdinfo; - struct uas_cmd_info *temp; - struct list_head list; unsigned long flags; int err; - spin_lock_irq(&uas_work_lock); - list_replace_init(&uas_work_list, &list); - spin_unlock_irq(&uas_work_lock); - - list_for_each_entry_safe(cmdinfo, temp, &list, list) { + spin_lock_irqsave(&devinfo->lock, flags); + list_for_each_entry(cmdinfo, &devinfo->inflight_list, list) { struct scsi_pointer *scp = (void *)cmdinfo; - struct scsi_cmnd *cmnd = container_of(scp, - struct scsi_cmnd, SCp); - struct uas_dev_info *devinfo = (void *)cmnd->device->hostdata; - spin_lock_irqsave(&devinfo->lock, flags); - err = uas_submit_urbs(cmnd, cmnd->device->hostdata, GFP_ATOMIC); + struct scsi_cmnd *cmnd = container_of(scp, struct scsi_cmnd, + SCp); + + if (!(cmdinfo->state & IS_IN_WORK_LIST)) + continue; + + err = uas_submit_urbs(cmnd, cmnd->device->hostdata, GFP_NOIO); if (!err) cmdinfo->state &= ~IS_IN_WORK_LIST; - spin_unlock_irqrestore(&devinfo->lock, flags); - if (err) { - list_del(&cmdinfo->list); - spin_lock_irq(&uas_work_lock); - list_add_tail(&cmdinfo->list, &uas_work_list); - spin_unlock_irq(&uas_work_lock); - schedule_work(&uas_work); - } + else + schedule_work(&devinfo->work); } + spin_unlock_irqrestore(&devinfo->lock, flags); } -static void uas_abort_work(struct uas_dev_info *devinfo) +static void uas_mark_cmd_dead(struct uas_dev_info *devinfo, + struct uas_cmd_info *cmdinfo, + int result, const char *caller) +{ + struct scsi_pointer *scp = (void *)cmdinfo; + struct scsi_cmnd *cmnd = container_of(scp, struct scsi_cmnd, SCp); + + uas_log_cmd_state(cmnd, caller); + WARN_ON_ONCE(!spin_is_locked(&devinfo->lock)); + WARN_ON_ONCE(cmdinfo->state & COMMAND_ABORTED); + cmdinfo->state |= COMMAND_ABORTED; + cmdinfo->state &= ~IS_IN_WORK_LIST; + cmnd->result = result << 16; + list_move_tail(&cmdinfo->list, &devinfo->dead_list); +} + +static void uas_abort_inflight(struct uas_dev_info *devinfo, int result, + const char *caller) { struct uas_cmd_info *cmdinfo; struct uas_cmd_info *temp; - struct list_head list; unsigned long flags; - spin_lock_irq(&uas_work_lock); - list_replace_init(&uas_work_list, &list); - spin_unlock_irq(&uas_work_lock); + spin_lock_irqsave(&devinfo->lock, flags); + list_for_each_entry_safe(cmdinfo, temp, &devinfo->inflight_list, list) + uas_mark_cmd_dead(devinfo, cmdinfo, result, caller); + spin_unlock_irqrestore(&devinfo->lock, flags); +} + +static void uas_add_work(struct uas_cmd_info *cmdinfo) +{ + struct scsi_pointer *scp = (void *)cmdinfo; + struct scsi_cmnd *cmnd = container_of(scp, struct scsi_cmnd, SCp); + struct uas_dev_info *devinfo = cmnd->device->hostdata; + + WARN_ON_ONCE(!spin_is_locked(&devinfo->lock)); + cmdinfo->state |= IS_IN_WORK_LIST; + schedule_work(&devinfo->work); +} + +static void uas_zap_dead(struct uas_dev_info *devinfo) +{ + struct uas_cmd_info *cmdinfo; + struct uas_cmd_info *temp; + unsigned long flags; spin_lock_irqsave(&devinfo->lock, flags); - list_for_each_entry_safe(cmdinfo, temp, &list, list) { + list_for_each_entry_safe(cmdinfo, temp, &devinfo->dead_list, list) { struct scsi_pointer *scp = (void *)cmdinfo; - struct scsi_cmnd *cmnd = container_of(scp, - struct scsi_cmnd, SCp); - struct uas_dev_info *di = (void *)cmnd->device->hostdata; - - if (di == devinfo) { - cmdinfo->state |= COMMAND_ABORTED; - cmdinfo->state &= ~IS_IN_WORK_LIST; - if (devinfo->resetting) { - /* uas_stat_cmplt() will not do that - * when a device reset is in - * progress */ - cmdinfo->state &= ~COMMAND_INFLIGHT; - } - uas_try_complete(cmnd, __func__); - } else { - /* not our uas device, relink into list */ - list_del(&cmdinfo->list); - spin_lock_irq(&uas_work_lock); - list_add_tail(&cmdinfo->list, &uas_work_list); - spin_unlock_irq(&uas_work_lock); - } + struct scsi_cmnd *cmnd = container_of(scp, struct scsi_cmnd, + SCp); + uas_log_cmd_state(cmnd, __func__); + WARN_ON_ONCE(!(cmdinfo->state & COMMAND_ABORTED)); + /* all urbs are killed, clear inflight bits */ + cmdinfo->state &= ~(COMMAND_INFLIGHT | + DATA_IN_URB_INFLIGHT | + DATA_OUT_URB_INFLIGHT); + uas_try_complete(cmnd, __func__); } + devinfo->running_task = 0; spin_unlock_irqrestore(&devinfo->lock, flags); } @@ -259,20 +283,19 @@ static int uas_try_complete(struct scsi_cmnd *cmnd, const char *caller) struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp; struct uas_dev_info *devinfo = (void *)cmnd->device->hostdata; - WARN_ON(!spin_is_locked(&devinfo->lock)); + WARN_ON_ONCE(!spin_is_locked(&devinfo->lock)); if (cmdinfo->state & (COMMAND_INFLIGHT | DATA_IN_URB_INFLIGHT | DATA_OUT_URB_INFLIGHT | UNLINK_DATA_URBS)) return -EBUSY; - BUG_ON(cmdinfo->state & COMMAND_COMPLETED); + WARN_ON_ONCE(cmdinfo->state & COMMAND_COMPLETED); cmdinfo->state |= COMMAND_COMPLETED; usb_free_urb(cmdinfo->data_in_urb); usb_free_urb(cmdinfo->data_out_urb); - if (cmdinfo->state & COMMAND_ABORTED) { + if (cmdinfo->state & COMMAND_ABORTED) scmd_printk(KERN_INFO, cmnd, "abort completed\n"); - cmnd->result = DID_ABORT << 16; - } + list_del(&cmdinfo->list); cmnd->scsi_done(cmnd); return 0; } @@ -286,11 +309,7 @@ static void uas_xfer_data(struct urb *urb, struct scsi_cmnd *cmnd, cmdinfo->state |= direction | SUBMIT_STATUS_URB; err = uas_submit_urbs(cmnd, cmnd->device->hostdata, GFP_ATOMIC); if (err) { - spin_lock(&uas_work_lock); - list_add_tail(&cmdinfo->list, &uas_work_list); - cmdinfo->state |= IS_IN_WORK_LIST; - spin_unlock(&uas_work_lock); - schedule_work(&uas_work); + uas_add_work(cmdinfo); } } @@ -298,14 +317,20 @@ static void uas_stat_cmplt(struct urb *urb) { struct iu *iu = urb->transfer_buffer; struct Scsi_Host *shost = urb->context; - struct uas_dev_info *devinfo = (void *)shost->hostdata[0]; + struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata; struct scsi_cmnd *cmnd; struct uas_cmd_info *cmdinfo; unsigned long flags; u16 tag; if (urb->status) { - dev_err(&urb->dev->dev, "URB BAD STATUS %d\n", urb->status); + if (urb->status == -ENOENT) { + dev_err(&urb->dev->dev, "stat urb: killed, stream %d\n", + urb->stream_id); + } else { + dev_err(&urb->dev->dev, "stat urb: status %d\n", + urb->status); + } usb_free_urb(urb); return; } @@ -324,6 +349,9 @@ static void uas_stat_cmplt(struct urb *urb) if (!cmnd) { if (iu->iu_id == IU_ID_RESPONSE) { + if (!devinfo->running_task) + dev_warn(&urb->dev->dev, + "stat urb: recv unexpected response iu\n"); /* store results for uas_eh_task_mgmt() */ memcpy(&devinfo->response, iu, sizeof(devinfo->response)); } @@ -346,17 +374,25 @@ static void uas_stat_cmplt(struct urb *urb) uas_sense(urb, cmnd); if (cmnd->result != 0) { /* cancel data transfers on error */ - spin_unlock_irqrestore(&devinfo->lock, flags); - uas_unlink_data_urbs(devinfo, cmdinfo); - spin_lock_irqsave(&devinfo->lock, flags); + uas_unlink_data_urbs(devinfo, cmdinfo, &flags); } cmdinfo->state &= ~COMMAND_INFLIGHT; uas_try_complete(cmnd, __func__); break; case IU_ID_READ_READY: + if (!cmdinfo->data_in_urb || + (cmdinfo->state & DATA_IN_URB_INFLIGHT)) { + scmd_printk(KERN_ERR, cmnd, "unexpected read rdy\n"); + break; + } uas_xfer_data(urb, cmnd, SUBMIT_DATA_IN_URB); break; case IU_ID_WRITE_READY: + if (!cmdinfo->data_out_urb || + (cmdinfo->state & DATA_OUT_URB_INFLIGHT)) { + scmd_printk(KERN_ERR, cmnd, "unexpected write rdy\n"); + break; + } uas_xfer_data(urb, cmnd, SUBMIT_DATA_OUT_URB); break; default: @@ -383,8 +419,15 @@ static void uas_data_cmplt(struct urb *urb) sdb = scsi_out(cmnd); cmdinfo->state &= ~DATA_OUT_URB_INFLIGHT; } - BUG_ON(sdb == NULL); - if (urb->status) { + if (sdb == NULL) { + WARN_ON_ONCE(1); + } else if (urb->status) { + if (urb->status != -ECONNRESET) { + uas_log_cmd_state(cmnd, __func__); + scmd_printk(KERN_ERR, cmnd, + "data cmplt err %d stream %d\n", + urb->status, urb->stream_id); + } /* error: no data transfered */ sdb->resid = sdb->length; } else { @@ -394,6 +437,17 @@ static void uas_data_cmplt(struct urb *urb) spin_unlock_irqrestore(&devinfo->lock, flags); } +static void uas_cmd_cmplt(struct urb *urb) +{ + struct scsi_cmnd *cmnd = urb->context; + + if (urb->status) { + uas_log_cmd_state(cmnd, __func__); + scmd_printk(KERN_ERR, cmnd, "cmd cmplt err %d\n", urb->status); + } + usb_free_urb(urb); +} + static struct urb *uas_alloc_data_urb(struct uas_dev_info *devinfo, gfp_t gfp, unsigned int pipe, u16 stream_id, struct scsi_cmnd *cmnd, @@ -408,8 +462,7 @@ static struct urb *uas_alloc_data_urb(struct uas_dev_info *devinfo, gfp_t gfp, goto out; usb_fill_bulk_urb(urb, udev, pipe, NULL, sdb->length, uas_data_cmplt, cmnd); - if (devinfo->use_streams) - urb->stream_id = stream_id; + urb->stream_id = stream_id; urb->num_sgs = udev->bus->sg_tablesize ? sdb->table.nents : 0; urb->sg = sdb->table.sgl; out: @@ -442,7 +495,7 @@ static struct urb *uas_alloc_sense_urb(struct uas_dev_info *devinfo, gfp_t gfp, } static struct urb *uas_alloc_cmd_urb(struct uas_dev_info *devinfo, gfp_t gfp, - struct scsi_cmnd *cmnd, u16 stream_id) + struct scsi_cmnd *cmnd) { struct usb_device *udev = devinfo->udev; struct scsi_device *sdev = cmnd->device; @@ -472,7 +525,7 @@ static struct urb *uas_alloc_cmd_urb(struct uas_dev_info *devinfo, gfp_t gfp, memcpy(iu->cdb, cmnd->cmnd, cmnd->cmd_len); usb_fill_bulk_urb(urb, udev, devinfo->cmd_pipe, iu, sizeof(*iu) + len, - usb_free_urb, NULL); + uas_cmd_cmplt, cmnd); urb->transfer_flags |= URB_FREE_BUFFER; out: return urb; @@ -512,13 +565,17 @@ static int uas_submit_task_urb(struct scsi_cmnd *cmnd, gfp_t gfp, } usb_fill_bulk_urb(urb, udev, devinfo->cmd_pipe, iu, sizeof(*iu), - usb_free_urb, NULL); + uas_cmd_cmplt, cmnd); urb->transfer_flags |= URB_FREE_BUFFER; + usb_anchor_urb(urb, &devinfo->cmd_urbs); err = usb_submit_urb(urb, gfp); - if (err) + if (err) { + usb_unanchor_urb(urb); + uas_log_cmd_state(cmnd, __func__); + scmd_printk(KERN_ERR, cmnd, "task submission err %d\n", err); goto err; - usb_anchor_urb(urb, &devinfo->cmd_urbs); + } return 0; @@ -533,38 +590,43 @@ err: * daft to me. */ -static int uas_submit_sense_urb(struct Scsi_Host *shost, - gfp_t gfp, unsigned int stream) +static struct urb *uas_submit_sense_urb(struct scsi_cmnd *cmnd, + gfp_t gfp, unsigned int stream) { - struct uas_dev_info *devinfo = (void *)shost->hostdata[0]; + struct Scsi_Host *shost = cmnd->device->host; + struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata; struct urb *urb; + int err; urb = uas_alloc_sense_urb(devinfo, gfp, shost, stream); if (!urb) - return SCSI_MLQUEUE_DEVICE_BUSY; - if (usb_submit_urb(urb, gfp)) { + return NULL; + usb_anchor_urb(urb, &devinfo->sense_urbs); + err = usb_submit_urb(urb, gfp); + if (err) { + usb_unanchor_urb(urb); + uas_log_cmd_state(cmnd, __func__); shost_printk(KERN_INFO, shost, - "sense urb submission failure\n"); + "sense urb submission error %d stream %d\n", + err, stream); usb_free_urb(urb); - return SCSI_MLQUEUE_DEVICE_BUSY; + return NULL; } - usb_anchor_urb(urb, &devinfo->sense_urbs); - return 0; + return urb; } static int uas_submit_urbs(struct scsi_cmnd *cmnd, struct uas_dev_info *devinfo, gfp_t gfp) { struct uas_cmd_info *cmdinfo = (void *)&cmnd->SCp; + struct urb *urb; int err; - WARN_ON(!spin_is_locked(&devinfo->lock)); + WARN_ON_ONCE(!spin_is_locked(&devinfo->lock)); if (cmdinfo->state & SUBMIT_STATUS_URB) { - err = uas_submit_sense_urb(cmnd->device->host, gfp, - cmdinfo->stream); - if (err) { - return err; - } + urb = uas_submit_sense_urb(cmnd, gfp, cmdinfo->stream); + if (!urb) + return SCSI_MLQUEUE_DEVICE_BUSY; cmdinfo->state &= ~SUBMIT_STATUS_URB; } @@ -578,14 +640,18 @@ static int uas_submit_urbs(struct scsi_cmnd *cmnd, } if (cmdinfo->state & SUBMIT_DATA_IN_URB) { - if (usb_submit_urb(cmdinfo->data_in_urb, gfp)) { + usb_anchor_urb(cmdinfo->data_in_urb, &devinfo->data_urbs); + err = usb_submit_urb(cmdinfo->data_in_urb, gfp); + if (err) { + usb_unanchor_urb(cmdinfo->data_in_urb); + uas_log_cmd_state(cmnd, __func__); scmd_printk(KERN_INFO, cmnd, - "data in urb submission failure\n"); + "data in urb submission error %d stream %d\n", + err, cmdinfo->data_in_urb->stream_id); return SCSI_MLQUEUE_DEVICE_BUSY; } cmdinfo->state &= ~SUBMIT_DATA_IN_URB; cmdinfo->state |= DATA_IN_URB_INFLIGHT; - usb_anchor_urb(cmdinfo->data_in_urb, &devinfo->data_urbs); } if (cmdinfo->state & ALLOC_DATA_OUT_URB) { @@ -598,33 +664,37 @@ static int uas_submit_urbs(struct scsi_cmnd *cmnd, } if (cmdinfo->state & SUBMIT_DATA_OUT_URB) { - if (usb_submit_urb(cmdinfo->data_out_urb, gfp)) { + usb_anchor_urb(cmdinfo->data_out_urb, &devinfo->data_urbs); + err = usb_submit_urb(cmdinfo->data_out_urb, gfp); + if (err) { + usb_unanchor_urb(cmdinfo->data_out_urb); + uas_log_cmd_state(cmnd, __func__); scmd_printk(KERN_INFO, cmnd, - "data out urb submission failure\n"); + "data out urb submission error %d stream %d\n", + err, cmdinfo->data_out_urb->stream_id); return SCSI_MLQUEUE_DEVICE_BUSY; } cmdinfo->state &= ~SUBMIT_DATA_OUT_URB; cmdinfo->state |= DATA_OUT_URB_INFLIGHT; - usb_anchor_urb(cmdinfo->data_out_urb, &devinfo->data_urbs); } if (cmdinfo->state & ALLOC_CMD_URB) { - cmdinfo->cmd_urb = uas_alloc_cmd_urb(devinfo, gfp, cmnd, - cmdinfo->stream); + cmdinfo->cmd_urb = uas_alloc_cmd_urb(devinfo, gfp, cmnd); if (!cmdinfo->cmd_urb) return SCSI_MLQUEUE_DEVICE_BUSY; cmdinfo->state &= ~ALLOC_CMD_URB; } if (cmdinfo->state & SUBMIT_CMD_URB) { - usb_get_urb(cmdinfo->cmd_urb); - if (usb_submit_urb(cmdinfo->cmd_urb, gfp)) { + usb_anchor_urb(cmdinfo->cmd_urb, &devinfo->cmd_urbs); + err = usb_submit_urb(cmdinfo->cmd_urb, gfp); + if (err) { + usb_unanchor_urb(cmdinfo->cmd_urb); + uas_log_cmd_state(cmnd, __func__); scmd_printk(KERN_INFO, cmnd, - "cmd urb submission failure\n"); + "cmd urb submission error %d\n", err); return SCSI_MLQUEUE_DEVICE_BUSY; } - usb_anchor_urb(cmdinfo->cmd_urb, &devinfo->cmd_urbs); - usb_put_urb(cmdinfo->cmd_urb); cmdinfo->cmd_urb = NULL; cmdinfo->state &= ~SUBMIT_CMD_URB; cmdinfo->state |= COMMAND_INFLIGHT; @@ -644,18 +714,22 @@ static int uas_queuecommand_lck(struct scsi_cmnd *cmnd, BUILD_BUG_ON(sizeof(struct uas_cmd_info) > sizeof(struct scsi_pointer)); + spin_lock_irqsave(&devinfo->lock, flags); + if (devinfo->resetting) { cmnd->result = DID_ERROR << 16; cmnd->scsi_done(cmnd); + spin_unlock_irqrestore(&devinfo->lock, flags); return 0; } - spin_lock_irqsave(&devinfo->lock, flags); if (devinfo->cmnd) { spin_unlock_irqrestore(&devinfo->lock, flags); return SCSI_MLQUEUE_DEVICE_BUSY; } + memset(cmdinfo, 0, sizeof(*cmdinfo)); + if (blk_rq_tagged(cmnd->request)) { cmdinfo->stream = cmnd->request->tag + 2; } else { @@ -692,13 +766,10 @@ static int uas_queuecommand_lck(struct scsi_cmnd *cmnd, spin_unlock_irqrestore(&devinfo->lock, flags); return SCSI_MLQUEUE_DEVICE_BUSY; } - spin_lock(&uas_work_lock); - list_add_tail(&cmdinfo->list, &uas_work_list); - cmdinfo->state |= IS_IN_WORK_LIST; - spin_unlock(&uas_work_lock); - schedule_work(&uas_work); + uas_add_work(cmdinfo); } + list_add_tail(&cmdinfo->list, &devinfo->inflight_list); spin_unlock_irqrestore(&devinfo->lock, flags); return 0; } @@ -709,46 +780,78 @@ static int uas_eh_task_mgmt(struct scsi_cmnd *cmnd, const char *fname, u8 function) { struct Scsi_Host *shost = cmnd->device->host; - struct uas_dev_info *devinfo = (void *)shost->hostdata[0]; - u16 tag = devinfo->qdepth - 1; + struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata; + u16 tag = devinfo->qdepth; unsigned long flags; + struct urb *sense_urb; + int result = SUCCESS; spin_lock_irqsave(&devinfo->lock, flags); + + if (devinfo->resetting) { + spin_unlock_irqrestore(&devinfo->lock, flags); + return FAILED; + } + + if (devinfo->running_task) { + shost_printk(KERN_INFO, shost, + "%s: %s: error already running a task\n", + __func__, fname); + spin_unlock_irqrestore(&devinfo->lock, flags); + return FAILED; + } + + devinfo->running_task = 1; memset(&devinfo->response, 0, sizeof(devinfo->response)); - if (uas_submit_sense_urb(shost, GFP_ATOMIC, tag)) { + sense_urb = uas_submit_sense_urb(cmnd, GFP_NOIO, + devinfo->use_streams ? tag : 0); + if (!sense_urb) { shost_printk(KERN_INFO, shost, "%s: %s: submit sense urb failed\n", __func__, fname); + devinfo->running_task = 0; spin_unlock_irqrestore(&devinfo->lock, flags); return FAILED; } - if (uas_submit_task_urb(cmnd, GFP_ATOMIC, function, tag)) { + if (uas_submit_task_urb(cmnd, GFP_NOIO, function, tag)) { shost_printk(KERN_INFO, shost, "%s: %s: submit task mgmt urb failed\n", __func__, fname); + devinfo->running_task = 0; spin_unlock_irqrestore(&devinfo->lock, flags); + usb_kill_urb(sense_urb); return FAILED; } spin_unlock_irqrestore(&devinfo->lock, flags); if (usb_wait_anchor_empty_timeout(&devinfo->sense_urbs, 3000) == 0) { + /* + * Note we deliberately do not clear running_task here. If we + * allow new tasks to be submitted, there is no way to figure + * out if a received response_iu is for the failed task or for + * the new one. A bus-reset will eventually clear running_task. + */ shost_printk(KERN_INFO, shost, "%s: %s timed out\n", __func__, fname); return FAILED; } + + spin_lock_irqsave(&devinfo->lock, flags); + devinfo->running_task = 0; if (be16_to_cpu(devinfo->response.tag) != tag) { shost_printk(KERN_INFO, shost, "%s: %s failed (wrong tag %d/%d)\n", __func__, fname, be16_to_cpu(devinfo->response.tag), tag); - return FAILED; - } - if (devinfo->response.response_code != RC_TMF_COMPLETE) { + result = FAILED; + } else if (devinfo->response.response_code != RC_TMF_COMPLETE) { shost_printk(KERN_INFO, shost, "%s: %s failed (rc 0x%x)\n", __func__, fname, devinfo->response.response_code); - return FAILED; + result = FAILED; } - return SUCCESS; + spin_unlock_irqrestore(&devinfo->lock, flags); + + return result; } static int uas_eh_abort_handler(struct scsi_cmnd *cmnd) @@ -758,22 +861,19 @@ static int uas_eh_abort_handler(struct scsi_cmnd *cmnd) unsigned long flags; int ret; - uas_log_cmd_state(cmnd, __func__); spin_lock_irqsave(&devinfo->lock, flags); - cmdinfo->state |= COMMAND_ABORTED; - if (cmdinfo->state & IS_IN_WORK_LIST) { - spin_lock(&uas_work_lock); - list_del(&cmdinfo->list); - cmdinfo->state &= ~IS_IN_WORK_LIST; - spin_unlock(&uas_work_lock); + + if (devinfo->resetting) { + spin_unlock_irqrestore(&devinfo->lock, flags); + return FAILED; } + + uas_mark_cmd_dead(devinfo, cmdinfo, DID_ABORT, __func__); if (cmdinfo->state & COMMAND_INFLIGHT) { spin_unlock_irqrestore(&devinfo->lock, flags); ret = uas_eh_task_mgmt(cmnd, "ABORT TASK", TMF_ABORT_TASK); } else { - spin_unlock_irqrestore(&devinfo->lock, flags); - uas_unlink_data_urbs(devinfo, cmdinfo); - spin_lock_irqsave(&devinfo->lock, flags); + uas_unlink_data_urbs(devinfo, cmdinfo, &flags); uas_try_complete(cmnd, __func__); spin_unlock_irqrestore(&devinfo->lock, flags); ret = SUCCESS; @@ -795,14 +895,25 @@ static int uas_eh_bus_reset_handler(struct scsi_cmnd *cmnd) struct usb_device *udev = devinfo->udev; int err; + err = usb_lock_device_for_reset(udev, devinfo->intf); + if (err) { + shost_printk(KERN_ERR, sdev->host, + "%s FAILED to get lock err %d\n", __func__, err); + return FAILED; + } + + shost_printk(KERN_INFO, sdev->host, "%s start\n", __func__); devinfo->resetting = 1; - uas_abort_work(devinfo); + uas_abort_inflight(devinfo, DID_RESET, __func__); usb_kill_anchored_urbs(&devinfo->cmd_urbs); usb_kill_anchored_urbs(&devinfo->sense_urbs); usb_kill_anchored_urbs(&devinfo->data_urbs); + uas_zap_dead(devinfo); err = usb_reset_device(udev); devinfo->resetting = 0; + usb_unlock_device(udev); + if (err) { shost_printk(KERN_INFO, sdev->host, "%s FAILED\n", __func__); return FAILED; @@ -814,7 +925,25 @@ static int uas_eh_bus_reset_handler(struct scsi_cmnd *cmnd) static int uas_slave_alloc(struct scsi_device *sdev) { - sdev->hostdata = (void *)sdev->host->hostdata[0]; + sdev->hostdata = (void *)sdev->host->hostdata; + + /* USB has unusual DMA-alignment requirements: Although the + * starting address of each scatter-gather element doesn't matter, + * the length of each element except the last must be divisible + * by the Bulk maxpacket value. There's currently no way to + * express this by block-layer constraints, so we'll cop out + * and simply require addresses to be aligned at 512-byte + * boundaries. This is okay since most block I/O involves + * hardware sectors that are multiples of 512 bytes in length, + * and since host controllers up through USB 2.0 have maxpacket + * values no larger than 512. + * + * But it doesn't suffice for Wireless USB, where Bulk maxpacket + * values can be as large as 2048. To make that work properly + * will require changes to the block layer. + */ + blk_queue_update_dma_alignment(sdev->request_queue, (512 - 1)); + return 0; } @@ -822,7 +951,7 @@ static int uas_slave_configure(struct scsi_device *sdev) { struct uas_dev_info *devinfo = sdev->hostdata; scsi_set_tag_type(sdev, MSG_ORDERED_TAG); - scsi_activate_tcq(sdev, devinfo->qdepth - 3); + scsi_activate_tcq(sdev, devinfo->qdepth - 2); return 0; } @@ -843,7 +972,14 @@ static struct scsi_host_template uas_host_template = { .ordered_tag = 1, }; +#define UNUSUAL_DEV(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax, \ + vendorName, productName, useProtocol, useTransport, \ + initFunction, flags) \ +{ USB_DEVICE_VER(id_vendor, id_product, bcdDeviceMin, bcdDeviceMax), \ + .driver_info = (flags) } + static struct usb_device_id uas_usb_ids[] = { +# include "unusual_uas.h" { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, USB_SC_SCSI, USB_PR_BULK) }, { USB_INTERFACE_INFO(USB_CLASS_MASS_STORAGE, USB_SC_SCSI, USB_PR_UAS) }, /* 0xaa is a prototype device I happen to have access to */ @@ -852,105 +988,55 @@ static struct usb_device_id uas_usb_ids[] = { }; MODULE_DEVICE_TABLE(usb, uas_usb_ids); -static int uas_is_interface(struct usb_host_interface *intf) -{ - return (intf->desc.bInterfaceClass == USB_CLASS_MASS_STORAGE && - intf->desc.bInterfaceSubClass == USB_SC_SCSI && - intf->desc.bInterfaceProtocol == USB_PR_UAS); -} - -static int uas_isnt_supported(struct usb_device *udev) -{ - struct usb_hcd *hcd = bus_to_hcd(udev->bus); - - dev_warn(&udev->dev, "The driver for the USB controller %s does not " - "support scatter-gather which is\n", - hcd->driver->description); - dev_warn(&udev->dev, "required by the UAS driver. Please try an" - "alternative USB controller if you wish to use UAS.\n"); - return -ENODEV; -} +#undef UNUSUAL_DEV static int uas_switch_interface(struct usb_device *udev, - struct usb_interface *intf) + struct usb_interface *intf) { - int i; - int sg_supported = udev->bus->sg_tablesize != 0; - - for (i = 0; i < intf->num_altsetting; i++) { - struct usb_host_interface *alt = &intf->altsetting[i]; - - if (uas_is_interface(alt)) { - if (!sg_supported) - return uas_isnt_supported(udev); - return usb_set_interface(udev, - alt->desc.bInterfaceNumber, - alt->desc.bAlternateSetting); - } - } + int alt; + + alt = uas_find_uas_alt_setting(intf); + if (alt < 0) + return alt; - return -ENODEV; + return usb_set_interface(udev, + intf->altsetting[0].desc.bInterfaceNumber, alt); } -static void uas_configure_endpoints(struct uas_dev_info *devinfo) +static int uas_configure_endpoints(struct uas_dev_info *devinfo) { struct usb_host_endpoint *eps[4] = { }; - struct usb_interface *intf = devinfo->intf; struct usb_device *udev = devinfo->udev; - struct usb_host_endpoint *endpoint = intf->cur_altsetting->endpoint; - unsigned i, n_endpoints = intf->cur_altsetting->desc.bNumEndpoints; + int r; devinfo->uas_sense_old = 0; devinfo->cmnd = NULL; - for (i = 0; i < n_endpoints; i++) { - unsigned char *extra = endpoint[i].extra; - int len = endpoint[i].extralen; - while (len > 1) { - if (extra[1] == USB_DT_PIPE_USAGE) { - unsigned pipe_id = extra[2]; - if (pipe_id > 0 && pipe_id < 5) - eps[pipe_id - 1] = &endpoint[i]; - break; - } - len -= extra[0]; - extra += extra[0]; - } - } + r = uas_find_endpoints(devinfo->intf->cur_altsetting, eps); + if (r) + return r; - /* - * Assume that if we didn't find a control pipe descriptor, we're - * using a device with old firmware that happens to be set up like - * this. - */ - if (!eps[0]) { - devinfo->cmd_pipe = usb_sndbulkpipe(udev, 1); - devinfo->status_pipe = usb_rcvbulkpipe(udev, 1); - devinfo->data_in_pipe = usb_rcvbulkpipe(udev, 2); - devinfo->data_out_pipe = usb_sndbulkpipe(udev, 2); - - eps[1] = usb_pipe_endpoint(udev, devinfo->status_pipe); - eps[2] = usb_pipe_endpoint(udev, devinfo->data_in_pipe); - eps[3] = usb_pipe_endpoint(udev, devinfo->data_out_pipe); - } else { - devinfo->cmd_pipe = usb_sndbulkpipe(udev, - eps[0]->desc.bEndpointAddress); - devinfo->status_pipe = usb_rcvbulkpipe(udev, - eps[1]->desc.bEndpointAddress); - devinfo->data_in_pipe = usb_rcvbulkpipe(udev, - eps[2]->desc.bEndpointAddress); - devinfo->data_out_pipe = usb_sndbulkpipe(udev, - eps[3]->desc.bEndpointAddress); - } + devinfo->cmd_pipe = usb_sndbulkpipe(udev, + usb_endpoint_num(&eps[0]->desc)); + devinfo->status_pipe = usb_rcvbulkpipe(udev, + usb_endpoint_num(&eps[1]->desc)); + devinfo->data_in_pipe = usb_rcvbulkpipe(udev, + usb_endpoint_num(&eps[2]->desc)); + devinfo->data_out_pipe = usb_sndbulkpipe(udev, + usb_endpoint_num(&eps[3]->desc)); - devinfo->qdepth = usb_alloc_streams(devinfo->intf, eps + 1, 3, 256, - GFP_KERNEL); - if (devinfo->qdepth < 0) { + if (udev->speed != USB_SPEED_SUPER) { devinfo->qdepth = 256; devinfo->use_streams = 0; } else { + devinfo->qdepth = usb_alloc_streams(devinfo->intf, eps + 1, + 3, 256, GFP_KERNEL); + if (devinfo->qdepth < 0) + return devinfo->qdepth; devinfo->use_streams = 1; } + + return 0; } static void uas_free_streams(struct uas_dev_info *devinfo) @@ -964,30 +1050,23 @@ static void uas_free_streams(struct uas_dev_info *devinfo) usb_free_streams(devinfo->intf, eps, 3, GFP_KERNEL); } -/* - * XXX: What I'd like to do here is register a SCSI host for each USB host in - * the system. Follow usb-storage's design of registering a SCSI host for - * each USB device for the moment. Can implement this by walking up the - * USB hierarchy until we find a USB host. - */ static int uas_probe(struct usb_interface *intf, const struct usb_device_id *id) { - int result; - struct Scsi_Host *shost; + int result = -ENOMEM; + struct Scsi_Host *shost = NULL; struct uas_dev_info *devinfo; struct usb_device *udev = interface_to_usbdev(intf); - if (uas_switch_interface(udev, intf)) + if (!uas_use_uas_driver(intf, id)) return -ENODEV; - devinfo = kmalloc(sizeof(struct uas_dev_info), GFP_KERNEL); - if (!devinfo) - return -ENOMEM; + if (uas_switch_interface(udev, intf)) + return -ENODEV; - result = -ENOMEM; - shost = scsi_host_alloc(&uas_host_template, sizeof(void *)); + shost = scsi_host_alloc(&uas_host_template, + sizeof(struct uas_dev_info)); if (!shost) - goto free; + goto set_alt0; shost->max_cmd_len = 16 + 252; shost->max_id = 1; @@ -995,33 +1074,40 @@ static int uas_probe(struct usb_interface *intf, const struct usb_device_id *id) shost->max_channel = 0; shost->sg_tablesize = udev->bus->sg_tablesize; + devinfo = (struct uas_dev_info *)shost->hostdata; devinfo->intf = intf; devinfo->udev = udev; devinfo->resetting = 0; + devinfo->running_task = 0; + devinfo->shutdown = 0; init_usb_anchor(&devinfo->cmd_urbs); init_usb_anchor(&devinfo->sense_urbs); init_usb_anchor(&devinfo->data_urbs); spin_lock_init(&devinfo->lock); - uas_configure_endpoints(devinfo); + INIT_WORK(&devinfo->work, uas_do_work); + INIT_LIST_HEAD(&devinfo->inflight_list); + INIT_LIST_HEAD(&devinfo->dead_list); - result = scsi_init_shared_tag_map(shost, devinfo->qdepth - 3); + result = uas_configure_endpoints(devinfo); if (result) - goto free; + goto set_alt0; - result = scsi_add_host(shost, &intf->dev); + result = scsi_init_shared_tag_map(shost, devinfo->qdepth - 2); if (result) - goto deconfig_eps; + goto free_streams; - shost->hostdata[0] = (unsigned long)devinfo; + result = scsi_add_host(shost, &intf->dev); + if (result) + goto free_streams; scsi_scan_host(shost); usb_set_intfdata(intf, shost); return result; -deconfig_eps: +free_streams: uas_free_streams(devinfo); - free: - kfree(devinfo); +set_alt0: + usb_set_interface(udev, intf->altsetting[0].desc.bInterfaceNumber, 0); if (shost) scsi_host_put(shost); return result; @@ -1029,45 +1115,146 @@ deconfig_eps: static int uas_pre_reset(struct usb_interface *intf) { -/* XXX: Need to return 1 if it's not our device in error handling */ + struct Scsi_Host *shost = usb_get_intfdata(intf); + struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata; + unsigned long flags; + + if (devinfo->shutdown) + return 0; + + /* Block new requests */ + spin_lock_irqsave(shost->host_lock, flags); + scsi_block_requests(shost); + spin_unlock_irqrestore(shost->host_lock, flags); + + /* Wait for any pending requests to complete */ + flush_work(&devinfo->work); + if (usb_wait_anchor_empty_timeout(&devinfo->sense_urbs, 5000) == 0) { + shost_printk(KERN_ERR, shost, "%s: timed out\n", __func__); + return 1; + } + + uas_free_streams(devinfo); + return 0; } static int uas_post_reset(struct usb_interface *intf) { -/* XXX: Need to return 1 if it's not our device in error handling */ + struct Scsi_Host *shost = usb_get_intfdata(intf); + struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata; + unsigned long flags; + + if (devinfo->shutdown) + return 0; + + if (uas_configure_endpoints(devinfo) != 0) { + shost_printk(KERN_ERR, shost, + "%s: alloc streams error after reset", __func__); + return 1; + } + + spin_lock_irqsave(shost->host_lock, flags); + scsi_report_bus_reset(shost, 0); + spin_unlock_irqrestore(shost->host_lock, flags); + + scsi_unblock_requests(shost); + + return 0; +} + +static int uas_suspend(struct usb_interface *intf, pm_message_t message) +{ + struct Scsi_Host *shost = usb_get_intfdata(intf); + struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata; + + /* Wait for any pending requests to complete */ + flush_work(&devinfo->work); + if (usb_wait_anchor_empty_timeout(&devinfo->sense_urbs, 5000) == 0) { + shost_printk(KERN_ERR, shost, "%s: timed out\n", __func__); + return -ETIME; + } + + return 0; +} + +static int uas_resume(struct usb_interface *intf) +{ + return 0; +} + +static int uas_reset_resume(struct usb_interface *intf) +{ + struct Scsi_Host *shost = usb_get_intfdata(intf); + struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata; + unsigned long flags; + + if (uas_configure_endpoints(devinfo) != 0) { + shost_printk(KERN_ERR, shost, + "%s: alloc streams error after reset", __func__); + return -EIO; + } + + spin_lock_irqsave(shost->host_lock, flags); + scsi_report_bus_reset(shost, 0); + spin_unlock_irqrestore(shost->host_lock, flags); + return 0; } static void uas_disconnect(struct usb_interface *intf) { struct Scsi_Host *shost = usb_get_intfdata(intf); - struct uas_dev_info *devinfo = (void *)shost->hostdata[0]; + struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata; devinfo->resetting = 1; - uas_abort_work(devinfo); + cancel_work_sync(&devinfo->work); + uas_abort_inflight(devinfo, DID_NO_CONNECT, __func__); usb_kill_anchored_urbs(&devinfo->cmd_urbs); usb_kill_anchored_urbs(&devinfo->sense_urbs); usb_kill_anchored_urbs(&devinfo->data_urbs); + uas_zap_dead(devinfo); scsi_remove_host(shost); uas_free_streams(devinfo); - kfree(devinfo); + scsi_host_put(shost); } /* - * XXX: Should this plug into libusual so we can auto-upgrade devices from - * Bulk-Only to UAS? + * Put the device back in usb-storage mode on shutdown, as some BIOS-es + * hang on reboot when the device is still in uas mode. Note the reset is + * necessary as some devices won't revert to usb-storage mode without it. */ +static void uas_shutdown(struct device *dev) +{ + struct usb_interface *intf = to_usb_interface(dev); + struct usb_device *udev = interface_to_usbdev(intf); + struct Scsi_Host *shost = usb_get_intfdata(intf); + struct uas_dev_info *devinfo = (struct uas_dev_info *)shost->hostdata; + + if (system_state != SYSTEM_RESTART) + return; + + devinfo->shutdown = 1; + uas_free_streams(devinfo); + usb_set_interface(udev, intf->altsetting[0].desc.bInterfaceNumber, 0); + usb_reset_device(udev); +} + static struct usb_driver uas_driver = { .name = "uas", .probe = uas_probe, .disconnect = uas_disconnect, .pre_reset = uas_pre_reset, .post_reset = uas_post_reset, + .suspend = uas_suspend, + .resume = uas_resume, + .reset_resume = uas_reset_resume, + .drvwrap.driver.shutdown = uas_shutdown, .id_table = uas_usb_ids, }; module_usb_driver(uas_driver); MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Matthew Wilcox and Sarah Sharp"); +MODULE_AUTHOR( + "Hans de Goede <hdegoede@redhat.com>, Matthew Wilcox and Sarah Sharp"); diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index adbeb25..f4a82291 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -2086,6 +2086,11 @@ UNUSUAL_DEV( 0xed10, 0x7636, 0x0001, 0x0001, "Digital MP3 Audio Player", USB_SC_DEVICE, USB_PR_DEVICE, NULL, US_FL_NOT_LOCKABLE ), +/* Unusual uas devices */ +#if IS_ENABLED(CONFIG_USB_UAS) +#include "unusual_uas.h" +#endif + /* Control/Bulk transport for all SubClass values */ USUAL_DEV(USB_SC_RBC, USB_PR_CB), USUAL_DEV(USB_SC_8020, USB_PR_CB), diff --git a/drivers/usb/storage/unusual_uas.h b/drivers/usb/storage/unusual_uas.h new file mode 100644 index 0000000..7244444 --- /dev/null +++ b/drivers/usb/storage/unusual_uas.h @@ -0,0 +1,52 @@ +/* Driver for USB Attached SCSI devices - Unusual Devices File + * + * (c) 2013 Hans de Goede <hdegoede@redhat.com> + * + * Based on the same file for the usb-storage driver, which is: + * (c) 2000-2002 Matthew Dharm (mdharm-usb@one-eyed-alien.net) + * (c) 2000 Adam J. Richter (adam@yggdrasil.com), Yggdrasil Computing, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2, or (at your option) any + * later version. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +/* + * IMPORTANT NOTE: This file must be included in another file which defines + * a UNUSUAL_DEV macro before this file is included. + */ + +/* + * If you edit this file, please try to keep it sorted first by VendorID, + * then by ProductID. + * + * If you want to add an entry for this file, be sure to include the + * following information: + * - a patch that adds the entry for your device, including your + * email address right above the entry (plus maybe a brief + * explanation of the reason for the entry), + * - lsusb -v output for the device + * Send your submission to Hans de Goede <hdegoede@redhat.com> + * and don't forget to CC: the USB development list <linux-usb@vger.kernel.org> + */ + +/* + * This is an example entry for the US_FL_IGNORE_UAS flag. Once we have an + * actual entry using US_FL_IGNORE_UAS this entry should be removed. + * + * UNUSUAL_DEV( 0xabcd, 0x1234, 0x0100, 0x0100, + * "Example", + * "Storage with broken UAS", + * USB_SC_DEVICE, USB_PR_DEVICE, NULL, + * US_FL_IGNORE_UAS), + */ diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c index 1c0b89f..f1c9626 100644 --- a/drivers/usb/storage/usb.c +++ b/drivers/usb/storage/usb.c @@ -72,6 +72,10 @@ #include "sierra_ms.h" #include "option_ms.h" +#if IS_ENABLED(CONFIG_USB_UAS) +#include "uas-detect.h" +#endif + /* Some informational data */ MODULE_AUTHOR("Matthew Dharm <mdharm-usb@one-eyed-alien.net>"); MODULE_DESCRIPTION("USB Mass Storage driver for Linux"); @@ -459,14 +463,14 @@ static int associate_dev(struct us_data *us, struct usb_interface *intf) #define TOLOWER(x) ((x) | 0x20) /* Adjust device flags based on the "quirks=" module parameter */ -static void adjust_quirks(struct us_data *us) +void usb_stor_adjust_quirks(struct usb_device *udev, unsigned long *fflags) { char *p; - u16 vid = le16_to_cpu(us->pusb_dev->descriptor.idVendor); - u16 pid = le16_to_cpu(us->pusb_dev->descriptor.idProduct); + u16 vid = le16_to_cpu(udev->descriptor.idVendor); + u16 pid = le16_to_cpu(udev->descriptor.idProduct); unsigned f = 0; unsigned int mask = (US_FL_SANE_SENSE | US_FL_BAD_SENSE | - US_FL_FIX_CAPACITY | + US_FL_FIX_CAPACITY | US_FL_IGNORE_UAS | US_FL_CAPACITY_HEURISTICS | US_FL_IGNORE_DEVICE | US_FL_NOT_LOCKABLE | US_FL_MAX_SECTORS_64 | US_FL_CAPACITY_OK | US_FL_IGNORE_RESIDUE | @@ -537,14 +541,18 @@ static void adjust_quirks(struct us_data *us) case 's': f |= US_FL_SINGLE_LUN; break; + case 'u': + f |= US_FL_IGNORE_UAS; + break; case 'w': f |= US_FL_NO_WP_DETECT; break; /* Ignore unrecognized flag characters */ } } - us->fflags = (us->fflags & ~mask) | f; + *fflags = (*fflags & ~mask) | f; } +EXPORT_SYMBOL_GPL(usb_stor_adjust_quirks); /* Get the unusual_devs entries and the string descriptors */ static int get_device_info(struct us_data *us, const struct usb_device_id *id, @@ -564,7 +572,7 @@ static int get_device_info(struct us_data *us, const struct usb_device_id *id, idesc->bInterfaceProtocol : unusual_dev->useTransport; us->fflags = id->driver_info; - adjust_quirks(us); + usb_stor_adjust_quirks(us->pusb_dev, &us->fflags); if (us->fflags & US_FL_IGNORE_DEVICE) { dev_info(pdev, "device ignored\n"); @@ -1035,6 +1043,12 @@ static int storage_probe(struct usb_interface *intf, int result; int size; + /* If uas is enabled and this device can do uas then ignore it. */ +#if IS_ENABLED(CONFIG_USB_UAS) + if (uas_use_uas_driver(intf, id)) + return -ENXIO; +#endif + /* * If the device isn't standard (is handled by a subdriver * module) then don't accept it. diff --git a/drivers/usb/storage/usb.h b/drivers/usb/storage/usb.h index 75f70f0..307e339 100644 --- a/drivers/usb/storage/usb.h +++ b/drivers/usb/storage/usb.h @@ -201,4 +201,7 @@ extern int usb_stor_probe1(struct us_data **pus, extern int usb_stor_probe2(struct us_data *us); extern void usb_stor_disconnect(struct usb_interface *intf); +extern void usb_stor_adjust_quirks(struct usb_device *dev, + unsigned long *fflags); + #endif diff --git a/drivers/usb/wusbcore/devconnect.c b/drivers/usb/wusbcore/devconnect.c index 3b959e8..0677139 100644 --- a/drivers/usb/wusbcore/devconnect.c +++ b/drivers/usb/wusbcore/devconnect.c @@ -284,7 +284,7 @@ void wusbhc_devconnect_ack(struct wusbhc *wusbhc, struct wusb_dn_connect *dnc, struct device *dev = wusbhc->dev; struct wusb_dev *wusb_dev; struct wusb_port *port; - unsigned idx, devnum; + unsigned idx; mutex_lock(&wusbhc->mutex); @@ -312,8 +312,6 @@ void wusbhc_devconnect_ack(struct wusbhc *wusbhc, struct wusb_dn_connect *dnc, goto error_unlock; } - devnum = idx + 2; - /* Make sure we are using no crypto on that "virtual port" */ wusbhc->set_ptk(wusbhc, idx, 0, NULL, 0); diff --git a/drivers/usb/wusbcore/wa-hc.c b/drivers/usb/wusbcore/wa-hc.c index 368360f..252c7bd 100644 --- a/drivers/usb/wusbcore/wa-hc.c +++ b/drivers/usb/wusbcore/wa-hc.c @@ -75,8 +75,6 @@ void __wa_destroy(struct wahc *wa) if (wa->dti_urb) { usb_kill_urb(wa->dti_urb); usb_put_urb(wa->dti_urb); - usb_kill_urb(wa->buf_in_urb); - usb_put_urb(wa->buf_in_urb); } kfree(wa->dti_buf); wa_nep_destroy(wa); diff --git a/drivers/usb/wusbcore/wa-hc.h b/drivers/usb/wusbcore/wa-hc.h index a2ef84b..f2a8d29 100644 --- a/drivers/usb/wusbcore/wa-hc.h +++ b/drivers/usb/wusbcore/wa-hc.h @@ -125,7 +125,8 @@ struct wa_rpipe { enum wa_dti_state { WA_DTI_TRANSFER_RESULT_PENDING, - WA_DTI_ISOC_PACKET_STATUS_PENDING + WA_DTI_ISOC_PACKET_STATUS_PENDING, + WA_DTI_BUF_IN_DATA_PENDING }; enum wa_quirks { @@ -134,8 +135,20 @@ enum wa_quirks { * requests to be concatenated and not sent as separate packets. */ WUSB_QUIRK_ALEREON_HWA_CONCAT_ISOC = 0x01, + /* + * The Alereon HWA can be instructed to not send transfer notifications + * as an optimization. + */ + WUSB_QUIRK_ALEREON_HWA_DISABLE_XFER_NOTIFICATIONS = 0x02, }; +enum wa_vendor_specific_requests { + WA_REQ_ALEREON_DISABLE_XFER_NOTIFICATIONS = 0x4C, + WA_REQ_ALEREON_FEATURE_SET = 0x01, + WA_REQ_ALEREON_FEATURE_CLEAR = 0x00, +}; + +#define WA_MAX_BUF_IN_URBS 4 /** * Instance of a HWA Host Controller * @@ -206,7 +219,9 @@ struct wahc { u32 dti_isoc_xfer_in_progress; u8 dti_isoc_xfer_seg; struct urb *dti_urb; /* URB for reading xfer results */ - struct urb *buf_in_urb; /* URB for reading data in */ + /* URBs for reading data in */ + struct urb buf_in_urbs[WA_MAX_BUF_IN_URBS]; + int active_buf_in_urbs; /* number of buf_in_urbs active. */ struct edc dti_edc; /* DTI error density counter */ void *dti_buf; size_t dti_buf_size; @@ -234,6 +249,7 @@ struct wahc { extern int wa_create(struct wahc *wa, struct usb_interface *iface, kernel_ulong_t); extern void __wa_destroy(struct wahc *wa); +extern int wa_dti_start(struct wahc *wa); void wa_reset_all(struct wahc *wa); @@ -275,6 +291,8 @@ static inline void wa_rpipe_init(struct wahc *wa) static inline void wa_init(struct wahc *wa) { + int index; + edc_init(&wa->nep_edc); atomic_set(&wa->notifs_queued, 0); wa->dti_state = WA_DTI_TRANSFER_RESULT_PENDING; @@ -288,6 +306,10 @@ static inline void wa_init(struct wahc *wa) INIT_WORK(&wa->xfer_error_work, wa_process_errored_transfers_run); wa->dto_in_use = 0; atomic_set(&wa->xfer_id_count, 1); + /* init the buf in URBs */ + for (index = 0; index < WA_MAX_BUF_IN_URBS; ++index) + usb_init_urb(&(wa->buf_in_urbs[index])); + wa->active_buf_in_urbs = 0; } /** diff --git a/drivers/usb/wusbcore/wa-rpipe.c b/drivers/usb/wusbcore/wa-rpipe.c index 6ca80a4..6d6da12 100644 --- a/drivers/usb/wusbcore/wa-rpipe.c +++ b/drivers/usb/wusbcore/wa-rpipe.c @@ -298,7 +298,7 @@ static struct usb_wireless_ep_comp_descriptor *rpipe_epc_find( break; } itr += hdr->bLength; - itr_size -= hdr->bDescriptorType; + itr_size -= hdr->bLength; } out: return epcd; diff --git a/drivers/usb/wusbcore/wa-xfer.c b/drivers/usb/wusbcore/wa-xfer.c index 3cd96e9..c8e2a47 100644 --- a/drivers/usb/wusbcore/wa-xfer.c +++ b/drivers/usb/wusbcore/wa-xfer.c @@ -167,6 +167,8 @@ struct wa_xfer { static void __wa_populate_dto_urb_isoc(struct wa_xfer *xfer, struct wa_seg *seg, int curr_iso_frame); +static void wa_complete_remaining_xfer_segs(struct wa_xfer *xfer, + int starting_index, enum wa_seg_status status); static inline void wa_xfer_init(struct wa_xfer *xfer) { @@ -367,13 +369,13 @@ static unsigned __wa_xfer_is_done(struct wa_xfer *xfer) break; case WA_SEG_ERROR: xfer->result = seg->result; - dev_dbg(dev, "xfer %p ID %08X#%u: ERROR result %zu(0x%08zX)\n", + dev_dbg(dev, "xfer %p ID %08X#%u: ERROR result %zi(0x%08zX)\n", xfer, wa_xfer_id(xfer), seg->index, seg->result, seg->result); goto out; case WA_SEG_ABORTED: xfer->result = seg->result; - dev_dbg(dev, "xfer %p ID %08X#%u: ABORTED result %zu(0x%08zX)\n", + dev_dbg(dev, "xfer %p ID %08X#%u: ABORTED result %zi(0x%08zX)\n", xfer, wa_xfer_id(xfer), seg->index, seg->result, seg->result); goto out; @@ -390,6 +392,24 @@ out: } /* + * Mark the given segment as done. Return true if this completes the xfer. + * This should only be called for segs that have been submitted to an RPIPE. + * Delayed segs are not marked as submitted so they do not need to be marked + * as done when cleaning up. + * + * xfer->lock has to be locked + */ +static unsigned __wa_xfer_mark_seg_as_done(struct wa_xfer *xfer, + struct wa_seg *seg, enum wa_seg_status status) +{ + seg->status = status; + xfer->segs_done++; + + /* check for done. */ + return __wa_xfer_is_done(xfer); +} + +/* * Search for a transfer list ID on the HCD's URB list * * For 32 bit architectures, we use the pointer itself; for 64 bits, a @@ -416,12 +436,51 @@ out: struct wa_xfer_abort_buffer { struct urb urb; + struct wahc *wa; struct wa_xfer_abort cmd; }; static void __wa_xfer_abort_cb(struct urb *urb) { struct wa_xfer_abort_buffer *b = urb->context; + struct wahc *wa = b->wa; + + /* + * If the abort request URB failed, then the HWA did not get the abort + * command. Forcibly clean up the xfer without waiting for a Transfer + * Result from the HWA. + */ + if (urb->status < 0) { + struct wa_xfer *xfer; + struct device *dev = &wa->usb_iface->dev; + + xfer = wa_xfer_get_by_id(wa, le32_to_cpu(b->cmd.dwTransferID)); + dev_err(dev, "%s: Transfer Abort request failed. result: %d\n", + __func__, urb->status); + if (xfer) { + unsigned long flags; + int done; + struct wa_rpipe *rpipe = xfer->ep->hcpriv; + + dev_err(dev, "%s: cleaning up xfer %p ID 0x%08X.\n", + __func__, xfer, wa_xfer_id(xfer)); + spin_lock_irqsave(&xfer->lock, flags); + /* mark all segs as aborted. */ + wa_complete_remaining_xfer_segs(xfer, 0, + WA_SEG_ABORTED); + done = __wa_xfer_is_done(xfer); + spin_unlock_irqrestore(&xfer->lock, flags); + if (done) + wa_xfer_completion(xfer); + wa_xfer_delayed_run(rpipe); + wa_xfer_put(xfer); + } else { + dev_err(dev, "%s: xfer ID 0x%08X already gone.\n", + __func__, le32_to_cpu(b->cmd.dwTransferID)); + } + } + + wa_put(wa); /* taken in __wa_xfer_abort */ usb_put_urb(&b->urb); } @@ -449,6 +508,7 @@ static int __wa_xfer_abort(struct wa_xfer *xfer) b->cmd.bRequestType = WA_XFER_ABORT; b->cmd.wRPipe = rpipe->descr.wRPipeIndex; b->cmd.dwTransferID = wa_xfer_id_le32(xfer); + b->wa = wa_get(xfer->wa); usb_init_urb(&b->urb); usb_fill_bulk_urb(&b->urb, xfer->wa->usb_dev, @@ -462,6 +522,7 @@ static int __wa_xfer_abort(struct wa_xfer *xfer) error_submit: + wa_put(xfer->wa); if (printk_ratelimit()) dev_err(dev, "xfer %p: Can't submit abort request: %d\n", xfer, result); @@ -733,6 +794,8 @@ static void wa_seg_dto_cb(struct urb *urb) seg->isoc_frame_offset + seg->isoc_frame_index); /* resubmit the URB with the next isoc frame. */ + /* take a ref on resubmit. */ + wa_xfer_get(xfer); result = usb_submit_urb(seg->dto_urb, GFP_ATOMIC); if (result < 0) { dev_err(dev, "xfer 0x%08X#%u: DTO submit failed: %d\n", @@ -760,9 +823,13 @@ static void wa_seg_dto_cb(struct urb *urb) goto error_default; } + /* taken when this URB was submitted. */ + wa_xfer_put(xfer); return; error_dto_submit: + /* taken on resubmit attempt. */ + wa_xfer_put(xfer); error_default: spin_lock_irqsave(&xfer->lock, flags); rpipe = xfer->ep->hcpriv; @@ -772,12 +839,10 @@ error_default: wa_reset_all(wa); } if (seg->status != WA_SEG_ERROR) { - seg->status = WA_SEG_ERROR; seg->result = urb->status; - xfer->segs_done++; __wa_xfer_abort(xfer); rpipe_ready = rpipe_avail_inc(rpipe); - done = __wa_xfer_is_done(xfer); + done = __wa_xfer_mark_seg_as_done(xfer, seg, WA_SEG_ERROR); } spin_unlock_irqrestore(&xfer->lock, flags); if (holding_dto) { @@ -788,7 +853,8 @@ error_default: wa_xfer_completion(xfer); if (rpipe_ready) wa_xfer_delayed_run(rpipe); - + /* taken when this URB was submitted. */ + wa_xfer_put(xfer); } /* @@ -842,12 +908,11 @@ static void wa_seg_iso_pack_desc_cb(struct urb *urb) } if (seg->status != WA_SEG_ERROR) { usb_unlink_urb(seg->dto_urb); - seg->status = WA_SEG_ERROR; seg->result = urb->status; - xfer->segs_done++; __wa_xfer_abort(xfer); rpipe_ready = rpipe_avail_inc(rpipe); - done = __wa_xfer_is_done(xfer); + done = __wa_xfer_mark_seg_as_done(xfer, seg, + WA_SEG_ERROR); } spin_unlock_irqrestore(&xfer->lock, flags); if (done) @@ -855,6 +920,8 @@ static void wa_seg_iso_pack_desc_cb(struct urb *urb) if (rpipe_ready) wa_xfer_delayed_run(rpipe); } + /* taken when this URB was submitted. */ + wa_xfer_put(xfer); } /* @@ -919,18 +986,18 @@ static void wa_seg_tr_cb(struct urb *urb) } usb_unlink_urb(seg->isoc_pack_desc_urb); usb_unlink_urb(seg->dto_urb); - seg->status = WA_SEG_ERROR; seg->result = urb->status; - xfer->segs_done++; __wa_xfer_abort(xfer); rpipe_ready = rpipe_avail_inc(rpipe); - done = __wa_xfer_is_done(xfer); + done = __wa_xfer_mark_seg_as_done(xfer, seg, WA_SEG_ERROR); spin_unlock_irqrestore(&xfer->lock, flags); if (done) wa_xfer_completion(xfer); if (rpipe_ready) wa_xfer_delayed_run(rpipe); } + /* taken when this URB was submitted. */ + wa_xfer_put(xfer); } /* @@ -940,7 +1007,7 @@ static void wa_seg_tr_cb(struct urb *urb) */ static struct scatterlist *wa_xfer_create_subset_sg(struct scatterlist *in_sg, const unsigned int bytes_transferred, - const unsigned int bytes_to_transfer, unsigned int *out_num_sgs) + const unsigned int bytes_to_transfer, int *out_num_sgs) { struct scatterlist *out_sg; unsigned int bytes_processed = 0, offset_into_current_page_data = 0, @@ -1094,14 +1161,13 @@ static int __wa_populate_dto_urb(struct wa_xfer *xfer, */ static int __wa_xfer_setup_segs(struct wa_xfer *xfer, size_t xfer_hdr_size) { - int result, cnt, iso_frame_offset; + int result, cnt, isoc_frame_offset = 0; size_t alloc_size = sizeof(*xfer->seg[0]) - sizeof(xfer->seg[0]->xfer_hdr) + xfer_hdr_size; struct usb_device *usb_dev = xfer->wa->usb_dev; const struct usb_endpoint_descriptor *dto_epd = xfer->wa->dto_epd; struct wa_seg *seg; size_t buf_itr, buf_size, buf_itr_size; - int isoc_frame_offset = 0; result = -ENOMEM; xfer->seg = kcalloc(xfer->segs, sizeof(xfer->seg[0]), GFP_ATOMIC); @@ -1109,7 +1175,6 @@ static int __wa_xfer_setup_segs(struct wa_xfer *xfer, size_t xfer_hdr_size) goto error_segs_kzalloc; buf_itr = 0; buf_size = xfer->urb->transfer_buffer_length; - iso_frame_offset = 0; for (cnt = 0; cnt < xfer->segs; cnt++) { size_t iso_pkt_descr_size = 0; int seg_isoc_frame_count = 0, seg_isoc_size = 0; @@ -1318,30 +1383,41 @@ static int __wa_seg_submit(struct wa_rpipe *rpipe, struct wa_xfer *xfer, /* default to done unless we encounter a multi-frame isoc segment. */ *dto_done = 1; + /* + * Take a ref for each segment urb so the xfer cannot disappear until + * all of the callbacks run. + */ + wa_xfer_get(xfer); /* submit the transfer request. */ + seg->status = WA_SEG_SUBMITTED; result = usb_submit_urb(&seg->tr_urb, GFP_ATOMIC); if (result < 0) { pr_err("%s: xfer %p#%u: REQ submit failed: %d\n", __func__, xfer, seg->index, result); - goto error_seg_submit; + wa_xfer_put(xfer); + goto error_tr_submit; } /* submit the isoc packet descriptor if present. */ if (seg->isoc_pack_desc_urb) { + wa_xfer_get(xfer); result = usb_submit_urb(seg->isoc_pack_desc_urb, GFP_ATOMIC); seg->isoc_frame_index = 0; if (result < 0) { pr_err("%s: xfer %p#%u: ISO packet descriptor submit failed: %d\n", __func__, xfer, seg->index, result); + wa_xfer_put(xfer); goto error_iso_pack_desc_submit; } } /* submit the out data if this is an out request. */ if (seg->dto_urb) { struct wahc *wa = xfer->wa; + wa_xfer_get(xfer); result = usb_submit_urb(seg->dto_urb, GFP_ATOMIC); if (result < 0) { pr_err("%s: xfer %p#%u: DTO submit failed: %d\n", __func__, xfer, seg->index, result); + wa_xfer_put(xfer); goto error_dto_submit; } /* @@ -1353,7 +1429,6 @@ static int __wa_seg_submit(struct wa_rpipe *rpipe, struct wa_xfer *xfer, && (seg->isoc_frame_count > 1)) *dto_done = 0; } - seg->status = WA_SEG_SUBMITTED; rpipe_avail_dec(rpipe); return 0; @@ -1361,7 +1436,7 @@ error_dto_submit: usb_unlink_urb(seg->isoc_pack_desc_urb); error_iso_pack_desc_submit: usb_unlink_urb(&seg->tr_urb); -error_seg_submit: +error_tr_submit: seg->status = WA_SEG_ERROR; seg->result = result; *dto_done = 1; @@ -1393,6 +1468,12 @@ static int __wa_xfer_delayed_run(struct wa_rpipe *rpipe, int *dto_waiting) list_node); list_del(&seg->list_node); xfer = seg->xfer; + /* + * Get a reference to the xfer in case the callbacks for the + * URBs submitted by __wa_seg_submit attempt to complete + * the xfer before this function completes. + */ + wa_xfer_get(xfer); result = __wa_seg_submit(rpipe, xfer, seg, &dto_done); /* release the dto resource if this RPIPE is done with it. */ if (dto_done) @@ -1401,13 +1482,23 @@ static int __wa_xfer_delayed_run(struct wa_rpipe *rpipe, int *dto_waiting) xfer, wa_xfer_id(xfer), seg->index, atomic_read(&rpipe->segs_available), result); if (unlikely(result < 0)) { + int done; + spin_unlock_irqrestore(&rpipe->seg_lock, flags); spin_lock_irqsave(&xfer->lock, flags); __wa_xfer_abort(xfer); + /* + * This seg was marked as submitted when it was put on + * the RPIPE seg_list. Mark it done. + */ xfer->segs_done++; + done = __wa_xfer_is_done(xfer); spin_unlock_irqrestore(&xfer->lock, flags); + if (done) + wa_xfer_completion(xfer); spin_lock_irqsave(&rpipe->seg_lock, flags); } + wa_xfer_put(xfer); } /* * Mark this RPIPE as waiting if dto was not acquired, there are @@ -1592,12 +1683,19 @@ static int wa_urb_enqueue_b(struct wa_xfer *xfer) dev_err(&(urb->dev->dev), "%s: error_xfer_setup\n", __func__); goto error_xfer_setup; } + /* + * Get a xfer reference since __wa_xfer_submit starts asynchronous + * operations that may try to complete the xfer before this function + * exits. + */ + wa_xfer_get(xfer); result = __wa_xfer_submit(xfer); if (result < 0) { dev_err(&(urb->dev->dev), "%s: error_xfer_submit\n", __func__); goto error_xfer_submit; } spin_unlock_irqrestore(&xfer->lock, flags); + wa_xfer_put(xfer); return 0; /* @@ -1623,6 +1721,7 @@ error_xfer_submit: spin_unlock_irqrestore(&xfer->lock, flags); if (done) wa_xfer_completion(xfer); + wa_xfer_put(xfer); /* return success since the completion routine will run. */ return 0; } @@ -1832,20 +1931,20 @@ int wa_urb_dequeue(struct wahc *wa, struct urb *urb, int status) /* check if it is safe to unlink. */ spin_lock_irqsave(&wa->xfer_list_lock, flags); result = usb_hcd_check_unlink_urb(&(wa->wusb->usb_hcd), urb, status); + if ((result == 0) && urb->hcpriv) { + /* + * Get a xfer ref to prevent a race with wa_xfer_giveback + * cleaning up the xfer while we are working with it. + */ + wa_xfer_get(urb->hcpriv); + } spin_unlock_irqrestore(&wa->xfer_list_lock, flags); if (result) return result; xfer = urb->hcpriv; - if (xfer == NULL) { - /* - * Nothing setup yet enqueue will see urb->status != - * -EINPROGRESS (by hcd layer) and bail out with - * error, no need to do completion - */ - BUG_ON(urb->status == -EINPROGRESS); - goto out; - } + if (xfer == NULL) + return -ENOENT; spin_lock_irqsave(&xfer->lock, flags); pr_debug("%s: DEQUEUE xfer id 0x%08X\n", __func__, wa_xfer_id(xfer)); rpipe = xfer->ep->hcpriv; @@ -1856,6 +1955,16 @@ int wa_urb_dequeue(struct wahc *wa, struct urb *urb, int status) result = -ENOENT; goto out_unlock; } + /* + * Check for done to avoid racing with wa_xfer_giveback and completing + * twice. + */ + if (__wa_xfer_is_done(xfer)) { + pr_debug("%s: xfer %p id 0x%08X already done.\n", __func__, + xfer, wa_xfer_id(xfer)); + result = -ENOENT; + goto out_unlock; + } /* Check the delayed list -> if there, release and complete */ spin_lock_irqsave(&wa->xfer_list_lock, flags2); if (!list_empty(&xfer->list_node) && xfer->seg == NULL) @@ -1865,6 +1974,11 @@ int wa_urb_dequeue(struct wahc *wa, struct urb *urb, int status) goto out_unlock; /* setup(), enqueue_b() completes */ /* Ok, the xfer is in flight already, it's been setup and submitted.*/ xfer_abort_pending = __wa_xfer_abort(xfer) >= 0; + /* + * grab the rpipe->seg_lock here to prevent racing with + * __wa_xfer_delayed_run. + */ + spin_lock(&rpipe->seg_lock); for (cnt = 0; cnt < xfer->segs; cnt++) { seg = xfer->seg[cnt]; pr_debug("%s: xfer id 0x%08X#%d status = %d\n", @@ -1885,16 +1999,24 @@ int wa_urb_dequeue(struct wahc *wa, struct urb *urb, int status) */ seg->status = WA_SEG_ABORTED; seg->result = -ENOENT; - spin_lock_irqsave(&rpipe->seg_lock, flags2); list_del(&seg->list_node); xfer->segs_done++; - spin_unlock_irqrestore(&rpipe->seg_lock, flags2); break; case WA_SEG_DONE: case WA_SEG_ERROR: case WA_SEG_ABORTED: break; /* + * The buf_in data for a segment in the + * WA_SEG_DTI_PENDING state is actively being read. + * Let wa_buf_in_cb handle it since it will be called + * and will increment xfer->segs_done. Cleaning up + * here could cause wa_buf_in_cb to access the xfer + * after it has been completed/freed. + */ + case WA_SEG_DTI_PENDING: + break; + /* * In the states below, the HWA device already knows * about the transfer. If an abort request was sent, * allow the HWA to process it and wait for the @@ -1903,7 +2025,6 @@ int wa_urb_dequeue(struct wahc *wa, struct urb *urb, int status) */ case WA_SEG_SUBMITTED: case WA_SEG_PENDING: - case WA_SEG_DTI_PENDING: /* * Check if the abort was successfully sent. This could * be false if the HWA has been removed but we haven't @@ -1917,6 +2038,7 @@ int wa_urb_dequeue(struct wahc *wa, struct urb *urb, int status) break; } } + spin_unlock(&rpipe->seg_lock); xfer->result = urb->status; /* -ENOENT or -ECONNRESET */ done = __wa_xfer_is_done(xfer); spin_unlock_irqrestore(&xfer->lock, flags); @@ -1924,11 +2046,12 @@ int wa_urb_dequeue(struct wahc *wa, struct urb *urb, int status) wa_xfer_completion(xfer); if (rpipe_ready) wa_xfer_delayed_run(rpipe); + wa_xfer_put(xfer); return result; out_unlock: spin_unlock_irqrestore(&xfer->lock, flags); -out: + wa_xfer_put(xfer); return result; dequeue_delayed: @@ -1937,6 +2060,7 @@ dequeue_delayed: xfer->result = urb->status; spin_unlock_irqrestore(&xfer->lock, flags); wa_xfer_giveback(xfer); + wa_xfer_put(xfer); usb_put_urb(urb); /* we got a ref in enqueue() */ return 0; } @@ -1996,15 +2120,17 @@ static int wa_xfer_status_to_errno(u8 status) * no other segment transfer results will be returned from the device. * Mark the remaining submitted or pending xfers as completed so that * the xfer will complete cleanly. + * + * xfer->lock must be held + * */ static void wa_complete_remaining_xfer_segs(struct wa_xfer *xfer, - struct wa_seg *incoming_seg, enum wa_seg_status status) + int starting_index, enum wa_seg_status status) { int index; struct wa_rpipe *rpipe = xfer->ep->hcpriv; - for (index = incoming_seg->index + 1; index < xfer->segs_submitted; - index++) { + for (index = starting_index; index < xfer->segs_submitted; index++) { struct wa_seg *current_seg = xfer->seg[index]; BUG_ON(current_seg == NULL); @@ -2033,73 +2159,110 @@ static void wa_complete_remaining_xfer_segs(struct wa_xfer *xfer, } } -/* Populate the wa->buf_in_urb based on the current isoc transfer state. */ -static void __wa_populate_buf_in_urb_isoc(struct wahc *wa, struct wa_xfer *xfer, - struct wa_seg *seg, int curr_iso_frame) +/* Populate the given urb based on the current isoc transfer state. */ +static int __wa_populate_buf_in_urb_isoc(struct wahc *wa, + struct urb *buf_in_urb, struct wa_xfer *xfer, struct wa_seg *seg) { - BUG_ON(wa->buf_in_urb->status == -EINPROGRESS); + int urb_start_frame = seg->isoc_frame_index + seg->isoc_frame_offset; + int seg_index, total_len = 0, urb_frame_index = urb_start_frame; + struct usb_iso_packet_descriptor *iso_frame_desc = + xfer->urb->iso_frame_desc; + const int dti_packet_size = usb_endpoint_maxp(wa->dti_epd); + int next_frame_contiguous; + struct usb_iso_packet_descriptor *iso_frame; + + BUG_ON(buf_in_urb->status == -EINPROGRESS); + + /* + * If the current frame actual_length is contiguous with the next frame + * and actual_length is a multiple of the DTI endpoint max packet size, + * combine the current frame with the next frame in a single URB. This + * reduces the number of URBs that must be submitted in that case. + */ + seg_index = seg->isoc_frame_index; + do { + next_frame_contiguous = 0; + + iso_frame = &iso_frame_desc[urb_frame_index]; + total_len += iso_frame->actual_length; + ++urb_frame_index; + ++seg_index; + + if (seg_index < seg->isoc_frame_count) { + struct usb_iso_packet_descriptor *next_iso_frame; + + next_iso_frame = &iso_frame_desc[urb_frame_index]; + + if ((iso_frame->offset + iso_frame->actual_length) == + next_iso_frame->offset) + next_frame_contiguous = 1; + } + } while (next_frame_contiguous + && ((iso_frame->actual_length % dti_packet_size) == 0)); /* this should always be 0 before a resubmit. */ - wa->buf_in_urb->num_mapped_sgs = 0; - wa->buf_in_urb->transfer_dma = xfer->urb->transfer_dma + - xfer->urb->iso_frame_desc[curr_iso_frame].offset; - wa->buf_in_urb->transfer_buffer_length = - xfer->urb->iso_frame_desc[curr_iso_frame].length; - wa->buf_in_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; - wa->buf_in_urb->transfer_buffer = NULL; - wa->buf_in_urb->sg = NULL; - wa->buf_in_urb->num_sgs = 0; - wa->buf_in_urb->context = seg; + buf_in_urb->num_mapped_sgs = 0; + buf_in_urb->transfer_dma = xfer->urb->transfer_dma + + iso_frame_desc[urb_start_frame].offset; + buf_in_urb->transfer_buffer_length = total_len; + buf_in_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; + buf_in_urb->transfer_buffer = NULL; + buf_in_urb->sg = NULL; + buf_in_urb->num_sgs = 0; + buf_in_urb->context = seg; + + /* return the number of frames included in this URB. */ + return seg_index - seg->isoc_frame_index; } -/* Populate the wa->buf_in_urb based on the current transfer state. */ -static int wa_populate_buf_in_urb(struct wahc *wa, struct wa_xfer *xfer, +/* Populate the given urb based on the current transfer state. */ +static int wa_populate_buf_in_urb(struct urb *buf_in_urb, struct wa_xfer *xfer, unsigned int seg_idx, unsigned int bytes_transferred) { int result = 0; struct wa_seg *seg = xfer->seg[seg_idx]; - BUG_ON(wa->buf_in_urb->status == -EINPROGRESS); + BUG_ON(buf_in_urb->status == -EINPROGRESS); /* this should always be 0 before a resubmit. */ - wa->buf_in_urb->num_mapped_sgs = 0; + buf_in_urb->num_mapped_sgs = 0; if (xfer->is_dma) { - wa->buf_in_urb->transfer_dma = xfer->urb->transfer_dma + buf_in_urb->transfer_dma = xfer->urb->transfer_dma + (seg_idx * xfer->seg_size); - wa->buf_in_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; - wa->buf_in_urb->transfer_buffer = NULL; - wa->buf_in_urb->sg = NULL; - wa->buf_in_urb->num_sgs = 0; + buf_in_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; + buf_in_urb->transfer_buffer = NULL; + buf_in_urb->sg = NULL; + buf_in_urb->num_sgs = 0; } else { /* do buffer or SG processing. */ - wa->buf_in_urb->transfer_flags &= ~URB_NO_TRANSFER_DMA_MAP; + buf_in_urb->transfer_flags &= ~URB_NO_TRANSFER_DMA_MAP; if (xfer->urb->transfer_buffer) { - wa->buf_in_urb->transfer_buffer = + buf_in_urb->transfer_buffer = xfer->urb->transfer_buffer + (seg_idx * xfer->seg_size); - wa->buf_in_urb->sg = NULL; - wa->buf_in_urb->num_sgs = 0; + buf_in_urb->sg = NULL; + buf_in_urb->num_sgs = 0; } else { /* allocate an SG list to store seg_size bytes and copy the subset of the xfer->urb->sg that matches the buffer subset we are about to read. */ - wa->buf_in_urb->sg = wa_xfer_create_subset_sg( + buf_in_urb->sg = wa_xfer_create_subset_sg( xfer->urb->sg, seg_idx * xfer->seg_size, bytes_transferred, - &(wa->buf_in_urb->num_sgs)); + &(buf_in_urb->num_sgs)); - if (!(wa->buf_in_urb->sg)) { - wa->buf_in_urb->num_sgs = 0; + if (!(buf_in_urb->sg)) { + buf_in_urb->num_sgs = 0; result = -ENOMEM; } - wa->buf_in_urb->transfer_buffer = NULL; + buf_in_urb->transfer_buffer = NULL; } } - wa->buf_in_urb->transfer_buffer_length = bytes_transferred; - wa->buf_in_urb->context = seg; + buf_in_urb->transfer_buffer_length = bytes_transferred; + buf_in_urb->context = seg; return result; } @@ -2124,6 +2287,7 @@ static void wa_xfer_result_chew(struct wahc *wa, struct wa_xfer *xfer, u8 usb_status; unsigned rpipe_ready = 0; unsigned bytes_transferred = le32_to_cpu(xfer_result->dwTransferLength); + struct urb *buf_in_urb = &(wa->buf_in_urbs[0]); spin_lock_irqsave(&xfer->lock, flags); seg_idx = xfer_result->bTransferSegment & 0x7f; @@ -2147,7 +2311,7 @@ static void wa_xfer_result_chew(struct wahc *wa, struct wa_xfer *xfer, } if (usb_status & 0x80) { seg->result = wa_xfer_status_to_errno(usb_status); - dev_err(dev, "DTI: xfer %p#:%08X:%u failed (0x%02x)\n", + dev_err(dev, "DTI: xfer %p 0x%08X:#%u failed (0x%02x)\n", xfer, xfer->id, seg->index, usb_status); seg->status = ((usb_status & 0x7F) == WA_XFER_STATUS_ABORTED) ? WA_SEG_ABORTED : WA_SEG_ERROR; @@ -2162,7 +2326,8 @@ static void wa_xfer_result_chew(struct wahc *wa, struct wa_xfer *xfer, * transfers with data or below for no data, the xfer will complete. */ if (xfer_result->bTransferSegment & 0x80) - wa_complete_remaining_xfer_segs(xfer, seg, WA_SEG_DONE); + wa_complete_remaining_xfer_segs(xfer, seg->index + 1, + WA_SEG_DONE); if (usb_pipeisoc(xfer->urb->pipe) && (le32_to_cpu(xfer_result->dwNumOfPackets) > 0)) { /* set up WA state to read the isoc packet status next. */ @@ -2173,20 +2338,21 @@ static void wa_xfer_result_chew(struct wahc *wa, struct wa_xfer *xfer, && (bytes_transferred > 0)) { /* IN data phase: read to buffer */ seg->status = WA_SEG_DTI_PENDING; - result = wa_populate_buf_in_urb(wa, xfer, seg_idx, + result = wa_populate_buf_in_urb(buf_in_urb, xfer, seg_idx, bytes_transferred); if (result < 0) goto error_buf_in_populate; - result = usb_submit_urb(wa->buf_in_urb, GFP_ATOMIC); - if (result < 0) + ++(wa->active_buf_in_urbs); + result = usb_submit_urb(buf_in_urb, GFP_ATOMIC); + if (result < 0) { + --(wa->active_buf_in_urbs); goto error_submit_buf_in; + } } else { /* OUT data phase or no data, complete it -- */ - seg->status = WA_SEG_DONE; seg->result = bytes_transferred; - xfer->segs_done++; rpipe_ready = rpipe_avail_inc(rpipe); - done = __wa_xfer_is_done(xfer); + done = __wa_xfer_mark_seg_as_done(xfer, seg, WA_SEG_DONE); } spin_unlock_irqrestore(&xfer->lock, flags); if (done) @@ -2205,15 +2371,15 @@ error_submit_buf_in: dev_err(dev, "xfer %p#%u: can't submit DTI data phase: %d\n", xfer, seg_idx, result); seg->result = result; - kfree(wa->buf_in_urb->sg); - wa->buf_in_urb->sg = NULL; + kfree(buf_in_urb->sg); + buf_in_urb->sg = NULL; error_buf_in_populate: __wa_xfer_abort(xfer); seg->status = WA_SEG_ERROR; error_complete: xfer->segs_done++; rpipe_ready = rpipe_avail_inc(rpipe); - wa_complete_remaining_xfer_segs(xfer, seg, seg->status); + wa_complete_remaining_xfer_segs(xfer, seg->index + 1, seg->status); done = __wa_xfer_is_done(xfer); /* * queue work item to clear STALL for control endpoints. @@ -2315,16 +2481,16 @@ static int wa_process_iso_packet_status(struct wahc *wa, struct urb *urb) for (seg_index = 0; seg_index < seg->isoc_frame_count; ++seg_index) { struct usb_iso_packet_descriptor *iso_frame_desc = xfer->urb->iso_frame_desc; - const int urb_frame_index = + const int xfer_frame_index = seg->isoc_frame_offset + seg_index; - iso_frame_desc[urb_frame_index].status = + iso_frame_desc[xfer_frame_index].status = wa_xfer_status_to_errno( le16_to_cpu(status_array[seg_index].PacketStatus)); - iso_frame_desc[urb_frame_index].actual_length = + iso_frame_desc[xfer_frame_index].actual_length = le16_to_cpu(status_array[seg_index].PacketLength); /* track the number of frames successfully transferred. */ - if (iso_frame_desc[urb_frame_index].actual_length > 0) { + if (iso_frame_desc[xfer_frame_index].actual_length > 0) { /* save the starting frame index for buf_in_urb. */ if (!data_frame_count) first_frame_index = seg_index; @@ -2333,30 +2499,64 @@ static int wa_process_iso_packet_status(struct wahc *wa, struct urb *urb) } if (xfer->is_inbound && data_frame_count) { - int result; + int result, total_frames_read = 0, urb_index = 0; + struct urb *buf_in_urb; + /* IN data phase: read to buffer */ + seg->status = WA_SEG_DTI_PENDING; + + /* start with the first frame with data. */ seg->isoc_frame_index = first_frame_index; - /* submit a read URB for the first frame with data. */ - __wa_populate_buf_in_urb_isoc(wa, xfer, seg, - seg->isoc_frame_index + seg->isoc_frame_offset); + /* submit up to WA_MAX_BUF_IN_URBS read URBs. */ + do { + int urb_frame_index, urb_frame_count; + struct usb_iso_packet_descriptor *iso_frame_desc; + + buf_in_urb = &(wa->buf_in_urbs[urb_index]); + urb_frame_count = __wa_populate_buf_in_urb_isoc(wa, + buf_in_urb, xfer, seg); + /* advance frame index to start of next read URB. */ + seg->isoc_frame_index += urb_frame_count; + total_frames_read += urb_frame_count; + + ++(wa->active_buf_in_urbs); + result = usb_submit_urb(buf_in_urb, GFP_ATOMIC); + + /* skip 0-byte frames. */ + urb_frame_index = + seg->isoc_frame_offset + seg->isoc_frame_index; + iso_frame_desc = + &(xfer->urb->iso_frame_desc[urb_frame_index]); + while ((seg->isoc_frame_index < + seg->isoc_frame_count) && + (iso_frame_desc->actual_length == 0)) { + ++(seg->isoc_frame_index); + ++iso_frame_desc; + } + ++urb_index; + + } while ((result == 0) && (urb_index < WA_MAX_BUF_IN_URBS) + && (seg->isoc_frame_index < + seg->isoc_frame_count)); - result = usb_submit_urb(wa->buf_in_urb, GFP_ATOMIC); if (result < 0) { + --(wa->active_buf_in_urbs); dev_err(dev, "DTI Error: Could not submit buf in URB (%d)", result); wa_reset_all(wa); - } else if (data_frame_count > 1) - /* If we need to read multiple frames, set DTI busy. */ + } else if (data_frame_count > total_frames_read) + /* If we need to read more frames, set DTI busy. */ dti_busy = 1; } else { /* OUT transfer or no more IN data, complete it -- */ - seg->status = WA_SEG_DONE; - xfer->segs_done++; rpipe_ready = rpipe_avail_inc(rpipe); - done = __wa_xfer_is_done(xfer); + done = __wa_xfer_mark_seg_as_done(xfer, seg, WA_SEG_DONE); } spin_unlock_irqrestore(&xfer->lock, flags); - wa->dti_state = WA_DTI_TRANSFER_RESULT_PENDING; + if (dti_busy) + wa->dti_state = WA_DTI_BUF_IN_DATA_PENDING; + else + wa->dti_state = WA_DTI_TRANSFER_RESULT_PENDING; if (done) wa_xfer_completion(xfer); if (rpipe_ready) @@ -2388,8 +2588,9 @@ static void wa_buf_in_cb(struct urb *urb) struct wahc *wa; struct device *dev; struct wa_rpipe *rpipe; - unsigned rpipe_ready = 0, seg_index, isoc_data_frame_count = 0; + unsigned rpipe_ready = 0, isoc_data_frame_count = 0; unsigned long flags; + int resubmit_dti = 0, active_buf_in_urbs; u8 done = 0; /* free the sg if it was used. */ @@ -2399,19 +2600,20 @@ static void wa_buf_in_cb(struct urb *urb) spin_lock_irqsave(&xfer->lock, flags); wa = xfer->wa; dev = &wa->usb_iface->dev; + --(wa->active_buf_in_urbs); + active_buf_in_urbs = wa->active_buf_in_urbs; if (usb_pipeisoc(xfer->urb->pipe)) { + struct usb_iso_packet_descriptor *iso_frame_desc = + xfer->urb->iso_frame_desc; + int seg_index; + /* - * Find the next isoc frame with data. Bail out after - * isoc_data_frame_count > 1 since there is no need to walk - * the entire frame array. We just need to know if - * isoc_data_frame_count is 0, 1, or >1. + * Find the next isoc frame with data and count how many + * frames with data remain. */ - seg_index = seg->isoc_frame_index + 1; - while ((seg_index < seg->isoc_frame_count) - && (isoc_data_frame_count <= 1)) { - struct usb_iso_packet_descriptor *iso_frame_desc = - xfer->urb->iso_frame_desc; + seg_index = seg->isoc_frame_index; + while (seg_index < seg->isoc_frame_count) { const int urb_frame_index = seg->isoc_frame_offset + seg_index; @@ -2432,24 +2634,39 @@ static void wa_buf_in_cb(struct urb *urb) seg->result += urb->actual_length; if (isoc_data_frame_count > 0) { - int result; - /* submit a read URB for the first frame with data. */ - __wa_populate_buf_in_urb_isoc(wa, xfer, seg, - seg->isoc_frame_index + seg->isoc_frame_offset); - result = usb_submit_urb(wa->buf_in_urb, GFP_ATOMIC); + int result, urb_frame_count; + + /* submit a read URB for the next frame with data. */ + urb_frame_count = __wa_populate_buf_in_urb_isoc(wa, urb, + xfer, seg); + /* advance index to start of next read URB. */ + seg->isoc_frame_index += urb_frame_count; + ++(wa->active_buf_in_urbs); + result = usb_submit_urb(urb, GFP_ATOMIC); if (result < 0) { + --(wa->active_buf_in_urbs); dev_err(dev, "DTI Error: Could not submit buf in URB (%d)", result); wa_reset_all(wa); } - } else { + /* + * If we are in this callback and + * isoc_data_frame_count > 0, it means that the dti_urb + * submission was delayed in wa_dti_cb. Once + * we submit the last buf_in_urb, we can submit the + * delayed dti_urb. + */ + resubmit_dti = (isoc_data_frame_count == + urb_frame_count); + } else if (active_buf_in_urbs == 0) { rpipe = xfer->ep->hcpriv; - seg->status = WA_SEG_DONE; - dev_dbg(dev, "xfer %p#%u: data in done (%zu bytes)\n", - xfer, seg->index, seg->result); - xfer->segs_done++; + dev_dbg(dev, + "xfer %p 0x%08X#%u: data in done (%zu bytes)\n", + xfer, wa_xfer_id(xfer), seg->index, + seg->result); rpipe_ready = rpipe_avail_inc(rpipe); - done = __wa_xfer_is_done(xfer); + done = __wa_xfer_mark_seg_as_done(xfer, seg, + WA_SEG_DONE); } spin_unlock_irqrestore(&xfer->lock, flags); if (done) @@ -2461,37 +2678,44 @@ static void wa_buf_in_cb(struct urb *urb) case -ENOENT: /* as it was done by the who unlinked us */ break; default: /* Other errors ... */ + /* + * Error on data buf read. Only resubmit DTI if it hasn't + * already been done by previously hitting this error or by a + * successful completion of the previous buf_in_urb. + */ + resubmit_dti = wa->dti_state != WA_DTI_TRANSFER_RESULT_PENDING; spin_lock_irqsave(&xfer->lock, flags); rpipe = xfer->ep->hcpriv; if (printk_ratelimit()) - dev_err(dev, "xfer %p#%u: data in error %d\n", - xfer, seg->index, urb->status); + dev_err(dev, "xfer %p 0x%08X#%u: data in error %d\n", + xfer, wa_xfer_id(xfer), seg->index, + urb->status); if (edc_inc(&wa->nep_edc, EDC_MAX_ERRORS, EDC_ERROR_TIMEFRAME)){ dev_err(dev, "DTO: URB max acceptable errors " "exceeded, resetting device\n"); wa_reset_all(wa); } - seg->status = WA_SEG_ERROR; seg->result = urb->status; - xfer->segs_done++; rpipe_ready = rpipe_avail_inc(rpipe); - __wa_xfer_abort(xfer); - done = __wa_xfer_is_done(xfer); + if (active_buf_in_urbs == 0) + done = __wa_xfer_mark_seg_as_done(xfer, seg, + WA_SEG_ERROR); + else + __wa_xfer_abort(xfer); spin_unlock_irqrestore(&xfer->lock, flags); if (done) wa_xfer_completion(xfer); if (rpipe_ready) wa_xfer_delayed_run(rpipe); } - /* - * If we are in this callback and isoc_data_frame_count > 0, it means - * that the dti_urb submission was delayed in wa_dti_cb. Once - * isoc_data_frame_count gets to 1, we can submit the deferred URB - * since the last buf_in_urb was just submitted. - */ - if (isoc_data_frame_count == 1) { - int result = usb_submit_urb(wa->dti_urb, GFP_ATOMIC); + + if (resubmit_dti) { + int result; + + wa->dti_state = WA_DTI_TRANSFER_RESULT_PENDING; + + result = usb_submit_urb(wa->dti_urb, GFP_ATOMIC); if (result < 0) { dev_err(dev, "DTI Error: Could not submit DTI URB (%d)\n", result); @@ -2561,11 +2785,15 @@ static void wa_dti_cb(struct urb *urb) xfer_result->hdr.bNotifyType); break; } + xfer_id = le32_to_cpu(xfer_result->dwTransferID); usb_status = xfer_result->bTransferStatus & 0x3f; - if (usb_status == WA_XFER_STATUS_NOT_FOUND) + if (usb_status == WA_XFER_STATUS_NOT_FOUND) { /* taken care of already */ + dev_dbg(dev, "%s: xfer 0x%08X#%u not found.\n", + __func__, xfer_id, + xfer_result->bTransferSegment & 0x7f); break; - xfer_id = le32_to_cpu(xfer_result->dwTransferID); + } xfer = wa_xfer_get_by_id(wa, xfer_id); if (xfer == NULL) { /* FIXME: transaction not found. */ @@ -2614,6 +2842,54 @@ out: } /* + * Initialize the DTI URB for reading transfer result notifications and also + * the buffer-in URB, for reading buffers. Then we just submit the DTI URB. + */ +int wa_dti_start(struct wahc *wa) +{ + const struct usb_endpoint_descriptor *dti_epd = wa->dti_epd; + struct device *dev = &wa->usb_iface->dev; + int result = -ENOMEM, index; + + if (wa->dti_urb != NULL) /* DTI URB already started */ + goto out; + + wa->dti_urb = usb_alloc_urb(0, GFP_KERNEL); + if (wa->dti_urb == NULL) { + dev_err(dev, "Can't allocate DTI URB\n"); + goto error_dti_urb_alloc; + } + usb_fill_bulk_urb( + wa->dti_urb, wa->usb_dev, + usb_rcvbulkpipe(wa->usb_dev, 0x80 | dti_epd->bEndpointAddress), + wa->dti_buf, wa->dti_buf_size, + wa_dti_cb, wa); + + /* init the buf in URBs */ + for (index = 0; index < WA_MAX_BUF_IN_URBS; ++index) { + usb_fill_bulk_urb( + &(wa->buf_in_urbs[index]), wa->usb_dev, + usb_rcvbulkpipe(wa->usb_dev, + 0x80 | dti_epd->bEndpointAddress), + NULL, 0, wa_buf_in_cb, wa); + } + result = usb_submit_urb(wa->dti_urb, GFP_KERNEL); + if (result < 0) { + dev_err(dev, "DTI Error: Could not submit DTI URB (%d) resetting\n", + result); + goto error_dti_urb_submit; + } +out: + return 0; + +error_dti_urb_submit: + usb_put_urb(wa->dti_urb); + wa->dti_urb = NULL; +error_dti_urb_alloc: + return result; +} +EXPORT_SYMBOL_GPL(wa_dti_start); +/* * Transfer complete notification * * Called from the notif.c code. We get a notification on EP2 saying @@ -2627,15 +2903,10 @@ out: * Follow up in wa_dti_cb(), as that's where the whole state * machine starts. * - * So here we just initialize the DTI URB for reading transfer result - * notifications and also the buffer-in URB, for reading buffers. Then - * we just submit the DTI URB. - * * @wa shall be referenced */ void wa_handle_notif_xfer(struct wahc *wa, struct wa_notif_hdr *notif_hdr) { - int result; struct device *dev = &wa->usb_iface->dev; struct wa_notif_xfer *notif_xfer; const struct usb_endpoint_descriptor *dti_epd = wa->dti_epd; @@ -2649,45 +2920,13 @@ void wa_handle_notif_xfer(struct wahc *wa, struct wa_notif_hdr *notif_hdr) notif_xfer->bEndpoint, dti_epd->bEndpointAddress); goto error; } - if (wa->dti_urb != NULL) /* DTI URB already started */ - goto out; - wa->dti_urb = usb_alloc_urb(0, GFP_KERNEL); - if (wa->dti_urb == NULL) { - dev_err(dev, "Can't allocate DTI URB\n"); - goto error_dti_urb_alloc; - } - usb_fill_bulk_urb( - wa->dti_urb, wa->usb_dev, - usb_rcvbulkpipe(wa->usb_dev, 0x80 | notif_xfer->bEndpoint), - wa->dti_buf, wa->dti_buf_size, - wa_dti_cb, wa); + /* attempt to start the DTI ep processing. */ + if (wa_dti_start(wa) < 0) + goto error; - wa->buf_in_urb = usb_alloc_urb(0, GFP_KERNEL); - if (wa->buf_in_urb == NULL) { - dev_err(dev, "Can't allocate BUF-IN URB\n"); - goto error_buf_in_urb_alloc; - } - usb_fill_bulk_urb( - wa->buf_in_urb, wa->usb_dev, - usb_rcvbulkpipe(wa->usb_dev, 0x80 | notif_xfer->bEndpoint), - NULL, 0, wa_buf_in_cb, wa); - result = usb_submit_urb(wa->dti_urb, GFP_KERNEL); - if (result < 0) { - dev_err(dev, "DTI Error: Could not submit DTI URB (%d) resetting\n", - result); - goto error_dti_urb_submit; - } -out: return; -error_dti_urb_submit: - usb_put_urb(wa->buf_in_urb); - wa->buf_in_urb = NULL; -error_buf_in_urb_alloc: - usb_put_urb(wa->dti_urb); - wa->dti_urb = NULL; -error_dti_urb_alloc: error: wa_reset_all(wa); } diff --git a/include/linux/usb/omap_control_usb.h b/include/linux/phy/omap_control_phy.h index 69ae383..5450403 100644 --- a/include/linux/usb/omap_control_usb.h +++ b/include/linux/phy/omap_control_phy.h @@ -1,5 +1,5 @@ /* - * omap_control_usb.h - Header file for the USB part of control module. + * omap_control_phy.h - Header file for the PHY part of control module. * * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com * This program is free software; you can redistribute it and/or modify @@ -16,10 +16,10 @@ * */ -#ifndef __OMAP_CONTROL_USB_H__ -#define __OMAP_CONTROL_USB_H__ +#ifndef __OMAP_CONTROL_PHY_H__ +#define __OMAP_CONTROL_PHY_H__ -enum omap_control_usb_type { +enum omap_control_phy_type { OMAP_CTRL_TYPE_OTGHS = 1, /* Mailbox OTGHS_CONTROL */ OMAP_CTRL_TYPE_USB2, /* USB2_PHY, power down in CONTROL_DEV_CONF */ OMAP_CTRL_TYPE_PIPE3, /* PIPE3 PHY, DPLL & seperate Rx/Tx power */ @@ -27,7 +27,7 @@ enum omap_control_usb_type { OMAP_CTRL_TYPE_AM437USB2, /* USB2 PHY, power e.g. AM437x */ }; -struct omap_control_usb { +struct omap_control_phy { struct device *dev; u32 __iomem *otghs_control; @@ -36,7 +36,7 @@ struct omap_control_usb { struct clk *sys_clk; - enum omap_control_usb_type type; + enum omap_control_phy_type type; }; enum omap_control_usb_mode { @@ -54,14 +54,14 @@ enum omap_control_usb_mode { #define OMAP_CTRL_DEV_SESSEND BIT(3) #define OMAP_CTRL_DEV_IDDIG BIT(4) -#define OMAP_CTRL_USB_PWRCTL_CLK_CMD_MASK 0x003FC000 -#define OMAP_CTRL_USB_PWRCTL_CLK_CMD_SHIFT 0xE +#define OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_MASK 0x003FC000 +#define OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_CMD_SHIFT 0xE -#define OMAP_CTRL_USB_PWRCTL_CLK_FREQ_MASK 0xFFC00000 -#define OMAP_CTRL_USB_PWRCTL_CLK_FREQ_SHIFT 0x16 +#define OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_MASK 0xFFC00000 +#define OMAP_CTRL_PIPE3_PHY_PWRCTL_CLK_FREQ_SHIFT 0x16 -#define OMAP_CTRL_USB3_PHY_TX_RX_POWERON 0x3 -#define OMAP_CTRL_USB3_PHY_TX_RX_POWEROFF 0x0 +#define OMAP_CTRL_PIPE3_PHY_TX_RX_POWERON 0x3 +#define OMAP_CTRL_PIPE3_PHY_TX_RX_POWEROFF 0x0 #define OMAP_CTRL_USB2_PHY_PD BIT(28) @@ -70,13 +70,13 @@ enum omap_control_usb_mode { #define AM437X_CTRL_USB2_OTGVDET_EN BIT(19) #define AM437X_CTRL_USB2_OTGSESSEND_EN BIT(20) -#if IS_ENABLED(CONFIG_OMAP_CONTROL_USB) -extern void omap_control_usb_phy_power(struct device *dev, int on); -extern void omap_control_usb_set_mode(struct device *dev, - enum omap_control_usb_mode mode); +#if IS_ENABLED(CONFIG_OMAP_CONTROL_PHY) +void omap_control_phy_power(struct device *dev, int on); +void omap_control_usb_set_mode(struct device *dev, + enum omap_control_usb_mode mode); #else -static inline void omap_control_usb_phy_power(struct device *dev, int on) +static inline void omap_control_phy_power(struct device *dev, int on) { } @@ -86,4 +86,4 @@ static inline void omap_control_usb_set_mode(struct device *dev, } #endif -#endif /* __OMAP_CONTROL_USB_H__ */ +#endif /* __OMAP_CONTROL_PHY_H__ */ diff --git a/include/linux/usb/omap_usb.h b/include/linux/phy/omap_usb.h index 6ae2936..dc2c541 100644 --- a/include/linux/usb/omap_usb.h +++ b/include/linux/phy/omap_usb.h @@ -34,14 +34,24 @@ struct omap_usb { struct usb_phy phy; struct phy_companion *comparator; void __iomem *pll_ctrl_base; + void __iomem *phy_base; struct device *dev; struct device *control_dev; struct clk *wkupclk; - struct clk *sys_clk; struct clk *optclk; - u8 is_suspended:1; + u8 flags; }; +struct usb_phy_data { + const char *label; + u8 flags; +}; + +/* Driver Flags */ +#define OMAP_USB2_HAS_START_SRP (1 << 0) +#define OMAP_USB2_HAS_SET_VBUS (1 << 1) +#define OMAP_USB2_CALIBRATE_FALSE_DISCONNECT (1 << 2) + #define phy_to_omapusb(x) container_of((x), struct omap_usb, phy) #if defined(CONFIG_OMAP_USB2) || defined(CONFIG_OMAP_USB2_MODULE) diff --git a/include/linux/phy/phy.h b/include/linux/phy/phy.h index 3f83459..e2f5ca9 100644 --- a/include/linux/phy/phy.h +++ b/include/linux/phy/phy.h @@ -149,8 +149,11 @@ struct phy *phy_get(struct device *dev, const char *string); struct phy *phy_optional_get(struct device *dev, const char *string); struct phy *devm_phy_get(struct device *dev, const char *string); struct phy *devm_phy_optional_get(struct device *dev, const char *string); +struct phy *devm_of_phy_get(struct device *dev, struct device_node *np, + const char *con_id); void phy_put(struct phy *phy); void devm_phy_put(struct device *dev, struct phy *phy); +struct phy *of_phy_get(struct device_node *np, const char *con_id); struct phy *of_phy_simple_xlate(struct device *dev, struct of_phandle_args *args); struct phy *phy_create(struct device *dev, const struct phy_ops *ops, @@ -251,6 +254,13 @@ static inline struct phy *devm_phy_optional_get(struct device *dev, return ERR_PTR(-ENOSYS); } +static inline struct phy *devm_of_phy_get(struct device *dev, + struct device_node *np, + const char *con_id) +{ + return ERR_PTR(-ENOSYS); +} + static inline void phy_put(struct phy *phy) { } @@ -259,6 +269,11 @@ static inline void devm_phy_put(struct device *dev, struct phy *phy) { } +static inline struct phy *of_phy_get(struct device_node *np, const char *con_id) +{ + return ERR_PTR(-ENOSYS); +} + static inline struct phy *of_phy_simple_xlate(struct device *dev, struct of_phandle_args *args) { diff --git a/include/linux/usb.h b/include/linux/usb.h index b55600a..6b7ec37 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -57,6 +57,7 @@ struct ep_device; * @extra: descriptors following this endpoint in the configuration * @extralen: how many bytes of "extra" are valid * @enabled: URBs may be submitted to this endpoint + * @streams: number of USB-3 streams allocated on the endpoint * * USB requests are always queued to a given endpoint, identified by a * descriptor within an active interface in a given USB configuration. @@ -71,6 +72,7 @@ struct usb_host_endpoint { unsigned char *extra; /* Extra descriptors */ int extralen; int enabled; + int streams; }; /* host-side wrapper for one interface setting's parsed descriptors */ @@ -202,6 +204,8 @@ static inline void usb_set_intfdata(struct usb_interface *intf, void *data) struct usb_interface *usb_get_intf(struct usb_interface *intf); void usb_put_intf(struct usb_interface *intf); +/* Hard limit */ +#define USB_MAXENDPOINTS 30 /* this maximum is arbitrary */ #define USB_MAXINTERFACES 32 #define USB_MAXIADS (USB_MAXINTERFACES/2) diff --git a/include/linux/usb/chipidea.h b/include/linux/usb/chipidea.h index 708bd11..bbe779f 100644 --- a/include/linux/usb/chipidea.h +++ b/include/linux/usb/chipidea.h @@ -25,6 +25,7 @@ struct ci_hdrc_platform_data { */ #define CI_HDRC_DUAL_ROLE_NOT_OTG BIT(4) #define CI_HDRC_IMX28_WRITE_FIX BIT(5) +#define CI_HDRC_FORCE_FULLSPEED BIT(6) enum usb_dr_mode dr_mode; #define CI_HDRC_CONTROLLER_RESET_EVENT 0 #define CI_HDRC_CONTROLLER_STOPPED_EVENT 1 diff --git a/include/linux/usb/hcd.h b/include/linux/usb/hcd.h index efe8d8a..485cd5e 100644 --- a/include/linux/usb/hcd.h +++ b/include/linux/usb/hcd.h @@ -143,6 +143,7 @@ struct usb_hcd { unsigned authorized_default:1; unsigned has_tt:1; /* Integrated TT in root hub */ unsigned amd_resume_bug:1; /* AMD remote wakeup quirk */ + unsigned can_do_streams:1; /* HC supports streams */ unsigned int irq; /* irq allocated */ void __iomem *regs; /* device memory/io */ diff --git a/include/linux/usb/phy.h b/include/linux/usb/phy.h index 6c0b1c5..353053a 100644 --- a/include/linux/usb/phy.h +++ b/include/linux/usb/phy.h @@ -111,6 +111,13 @@ struct usb_phy { int (*set_suspend)(struct usb_phy *x, int suspend); + /* + * Set wakeup enable for PHY, in that case, the PHY can be + * woken up from suspend status due to external events, + * like vbus change, dp/dm change and id. + */ + int (*set_wakeup)(struct usb_phy *x, bool enabled); + /* notify phy connect status change */ int (*notify_connect)(struct usb_phy *x, enum usb_device_speed speed); @@ -265,6 +272,15 @@ usb_phy_set_suspend(struct usb_phy *x, int suspend) } static inline int +usb_phy_set_wakeup(struct usb_phy *x, bool enabled) +{ + if (x && x->set_wakeup) + return x->set_wakeup(x, enabled); + else + return 0; +} + +static inline int usb_phy_notify_connect(struct usb_phy *x, enum usb_device_speed speed) { if (x && x->notify_connect) diff --git a/include/linux/usb/serial.h b/include/linux/usb/serial.h index 704a1ab..9bb547c 100644 --- a/include/linux/usb/serial.h +++ b/include/linux/usb/serial.h @@ -190,7 +190,8 @@ static inline void usb_set_serial_data(struct usb_serial *serial, void *data) * @num_ports: the number of different ports this device will have. * @bulk_in_size: minimum number of bytes to allocate for bulk-in buffer * (0 = end-point size) - * @bulk_out_size: bytes to allocate for bulk-out buffer (0 = end-point size) + * @bulk_out_size: minimum number of bytes to allocate for bulk-out buffer + * (0 = end-point size) * @calc_num_ports: pointer to a function to determine how many ports this * device has dynamically. It will be called after the probe() * callback is called, but before attach() diff --git a/include/linux/usb/uas.h b/include/linux/usb/uas.h index 5499ab5..3fc8e8b 100644 --- a/include/linux/usb/uas.h +++ b/include/linux/usb/uas.h @@ -9,7 +9,7 @@ struct iu { __u8 iu_id; __u8 rsvd1; __be16 tag; -}; +} __attribute__((__packed__)); enum { IU_ID_COMMAND = 0x01, @@ -52,7 +52,7 @@ struct command_iu { __u8 rsvd7; struct scsi_lun lun; __u8 cdb[16]; /* XXX: Overflow-checking tools may misunderstand */ -}; +} __attribute__((__packed__)); struct task_mgmt_iu { __u8 iu_id; @@ -62,7 +62,7 @@ struct task_mgmt_iu { __u8 rsvd2; __be16 task_tag; struct scsi_lun lun; -}; +} __attribute__((__packed__)); /* * Also used for the Read Ready and Write Ready IUs since they have the @@ -77,15 +77,15 @@ struct sense_iu { __u8 rsvd7[7]; __be16 len; __u8 sense[SCSI_SENSE_BUFFERSIZE]; -}; +} __attribute__((__packed__)); -struct response_ui { +struct response_iu { __u8 iu_id; __u8 rsvd1; __be16 tag; - __be16 add_response_info; + __u8 add_response_info[3]; __u8 response_code; -}; +} __attribute__((__packed__)); struct usb_pipe_usage_descriptor { __u8 bLength; diff --git a/include/linux/usb_usual.h b/include/linux/usb_usual.h index 6303568..1a64b26 100644 --- a/include/linux/usb_usual.h +++ b/include/linux/usb_usual.h @@ -67,8 +67,10 @@ /* Initial READ(10) (and others) must be retried */ \ US_FLAG(WRITE_CACHE, 0x00200000) \ /* Write Cache status is not available */ \ - US_FLAG(NEEDS_CAP16, 0x00400000) - /* cannot handle READ_CAPACITY_10 */ + US_FLAG(NEEDS_CAP16, 0x00400000) \ + /* cannot handle READ_CAPACITY_10 */ \ + US_FLAG(IGNORE_UAS, 0x00800000) \ + /* Device advertises UAS but it is broken */ #define US_FLAG(name, value) US_FL_##name = value , enum { US_DO_ALL_FLAGS }; diff --git a/include/uapi/linux/usb/functionfs.h b/include/uapi/linux/usb/functionfs.h index d6b0128..2a4b4a7 100644 --- a/include/uapi/linux/usb/functionfs.h +++ b/include/uapi/linux/usb/functionfs.h @@ -10,9 +10,15 @@ enum { FUNCTIONFS_DESCRIPTORS_MAGIC = 1, - FUNCTIONFS_STRINGS_MAGIC = 2 + FUNCTIONFS_STRINGS_MAGIC = 2, + FUNCTIONFS_DESCRIPTORS_MAGIC_V2 = 3, }; +enum functionfs_flags { + FUNCTIONFS_HAS_FS_DESC = 1, + FUNCTIONFS_HAS_HS_DESC = 2, + FUNCTIONFS_HAS_SS_DESC = 4, +}; #ifndef __KERNEL__ @@ -29,29 +35,39 @@ struct usb_endpoint_descriptor_no_audio { /* - * All numbers must be in little endian order. - */ - -struct usb_functionfs_descs_head { - __le32 magic; - __le32 length; - __le32 fs_count; - __le32 hs_count; -} __attribute__((packed)); - -/* * Descriptors format: * * | off | name | type | description | * |-----+-----------+--------------+--------------------------------------| - * | 0 | magic | LE32 | FUNCTIONFS_{FS,HS}_DESCRIPTORS_MAGIC | + * | 0 | magic | LE32 | FUNCTIONFS_DESCRIPTORS_MAGIC_V2 | + * | 4 | length | LE32 | length of the whole data chunk | + * | 8 | flags | LE32 | combination of functionfs_flags | + * | | fs_count | LE32 | number of full-speed descriptors | + * | | hs_count | LE32 | number of high-speed descriptors | + * | | ss_count | LE32 | number of super-speed descriptors | + * | | fs_descrs | Descriptor[] | list of full-speed descriptors | + * | | hs_descrs | Descriptor[] | list of high-speed descriptors | + * | | ss_descrs | Descriptor[] | list of super-speed descriptors | + * + * Depending on which flags are set, various fields may be missing in the + * structure. Any flags that are not recognised cause the whole block to be + * rejected with -ENOSYS. + * + * Legacy descriptors format: + * + * | off | name | type | description | + * |-----+-----------+--------------+--------------------------------------| + * | 0 | magic | LE32 | FUNCTIONFS_DESCRIPTORS_MAGIC | * | 4 | length | LE32 | length of the whole data chunk | * | 8 | fs_count | LE32 | number of full-speed descriptors | * | 12 | hs_count | LE32 | number of high-speed descriptors | * | 16 | fs_descrs | Descriptor[] | list of full-speed descriptors | * | | hs_descrs | Descriptor[] | list of high-speed descriptors | * - * descs are just valid USB descriptors and have the following format: + * All numbers must be in little endian order. + * + * Descriptor[] is an array of valid USB descriptors which have the following + * format: * * | off | name | type | description | * |-----+-----------------+------+--------------------------| diff --git a/include/uapi/linux/usbdevice_fs.h b/include/uapi/linux/usbdevice_fs.h index 0c65e4b..abe5f4b 100644 --- a/include/uapi/linux/usbdevice_fs.h +++ b/include/uapi/linux/usbdevice_fs.h @@ -102,7 +102,10 @@ struct usbdevfs_urb { int buffer_length; int actual_length; int start_frame; - int number_of_packets; + union { + int number_of_packets; /* Only used for isoc urbs */ + unsigned int stream_id; /* Only used with bulk streams */ + }; int error_count; unsigned int signr; /* signal to be sent on completion, or 0 if none should be sent. */ @@ -144,6 +147,11 @@ struct usbdevfs_disconnect_claim { char driver[USBDEVFS_MAXDRIVERNAME + 1]; }; +struct usbdevfs_streams { + unsigned int num_streams; /* Not used by USBDEVFS_FREE_STREAMS */ + unsigned int num_eps; + unsigned char eps[0]; +}; #define USBDEVFS_CONTROL _IOWR('U', 0, struct usbdevfs_ctrltransfer) #define USBDEVFS_CONTROL32 _IOWR('U', 0, struct usbdevfs_ctrltransfer32) @@ -176,5 +184,7 @@ struct usbdevfs_disconnect_claim { #define USBDEVFS_RELEASE_PORT _IOR('U', 25, unsigned int) #define USBDEVFS_GET_CAPABILITIES _IOR('U', 26, __u32) #define USBDEVFS_DISCONNECT_CLAIM _IOR('U', 27, struct usbdevfs_disconnect_claim) +#define USBDEVFS_ALLOC_STREAMS _IOR('U', 28, struct usbdevfs_streams) +#define USBDEVFS_FREE_STREAMS _IOR('U', 29, struct usbdevfs_streams) #endif /* _UAPI_LINUX_USBDEVICE_FS_H */ |