diff options
-rw-r--r-- | drivers/net/ethernet/intel/e1000e/82571.h | 2 | ||||
-rw-r--r-- | drivers/net/ethernet/intel/e1000e/defines.h | 3 | ||||
-rw-r--r-- | drivers/net/ethernet/intel/e1000e/ethtool.c | 6 | ||||
-rw-r--r-- | drivers/net/ethernet/intel/e1000e/netdev.c | 5 |
4 files changed, 7 insertions, 9 deletions
diff --git a/drivers/net/ethernet/intel/e1000e/82571.h b/drivers/net/ethernet/intel/e1000e/82571.h index 85cb1a3..08e24dc 100644 --- a/drivers/net/ethernet/intel/e1000e/82571.h +++ b/drivers/net/ethernet/intel/e1000e/82571.h @@ -44,6 +44,8 @@ #define E1000_EIAC_82574 0x000DC /* Ext. Interrupt Auto Clear - RW */ #define E1000_EIAC_MASK_82574 0x01F00000 +#define E1000_IVAR_INT_ALLOC_VALID 0x8 + /* Manageability Operation Mode mask */ #define E1000_NVM_INIT_CTRL2_MNGM 0x6000 diff --git a/drivers/net/ethernet/intel/e1000e/defines.h b/drivers/net/ethernet/intel/e1000e/defines.h index e6fe090..b7c664f 100644 --- a/drivers/net/ethernet/intel/e1000e/defines.h +++ b/drivers/net/ethernet/intel/e1000e/defines.h @@ -216,6 +216,8 @@ #define E1000_CTRL_MEHE 0x00080000 /* Memory Error Handling Enable */ #define E1000_CTRL_SWDPIN0 0x00040000 /* SWDPIN 0 value */ #define E1000_CTRL_SWDPIN1 0x00080000 /* SWDPIN 1 value */ +#define E1000_CTRL_ADVD3WUC 0x00100000 /* D3 WUC */ +#define E1000_CTRL_EN_PHY_PWR_MGMT 0x00200000 /* PHY PM enable */ #define E1000_CTRL_SWDPIO0 0x00400000 /* SWDPIN 0 Input or output */ #define E1000_CTRL_RST 0x04000000 /* Global reset */ #define E1000_CTRL_RFCE 0x08000000 /* Receive Flow Control enable */ @@ -310,6 +312,7 @@ /* SerDes Control */ #define E1000_SCTL_DISABLE_SERDES_LOOPBACK 0x0400 +#define E1000_SCTL_ENABLE_SERDES_LOOPBACK 0x0410 /* Receive Checksum Control */ #define E1000_RXCSUM_TUOFL 0x00000200 /* TCP / UDP checksum offload */ diff --git a/drivers/net/ethernet/intel/e1000e/ethtool.c b/drivers/net/ethernet/intel/e1000e/ethtool.c index 23d5d90..8f5832c 100644 --- a/drivers/net/ethernet/intel/e1000e/ethtool.c +++ b/drivers/net/ethernet/intel/e1000e/ethtool.c @@ -1432,8 +1432,7 @@ static int e1000_set_82571_fiber_loopback(struct e1000_adapter *adapter) /* special write to serdes control register to enable SerDes analog * loopback */ -#define E1000_SERDES_LB_ON 0x410 - ew32(SCTL, E1000_SERDES_LB_ON); + ew32(SCTL, E1000_SCTL_ENABLE_SERDES_LOOPBACK); e1e_flush(); usleep_range(10000, 20000); @@ -1527,8 +1526,7 @@ static void e1000_loopback_cleanup(struct e1000_adapter *adapter) case e1000_82572: if (hw->phy.media_type == e1000_media_type_fiber || hw->phy.media_type == e1000_media_type_internal_serdes) { -#define E1000_SERDES_LB_OFF 0x400 - ew32(SCTL, E1000_SERDES_LB_OFF); + ew32(SCTL, E1000_SCTL_DISABLE_SERDES_LOOPBACK); e1e_flush(); usleep_range(10000, 20000); break; diff --git a/drivers/net/ethernet/intel/e1000e/netdev.c b/drivers/net/ethernet/intel/e1000e/netdev.c index b085ce1..b4eab18 100644 --- a/drivers/net/ethernet/intel/e1000e/netdev.c +++ b/drivers/net/ethernet/intel/e1000e/netdev.c @@ -1957,7 +1957,6 @@ static void e1000_configure_msix(struct e1000_adapter *adapter) ew32(RFCTL, rfctl); } -#define E1000_IVAR_INT_ALLOC_VALID 0x8 /* Configure Rx vector */ rx_ring->ims_val = E1000_IMS_RXQ0; adapter->eiac_mask |= rx_ring->ims_val; @@ -5911,10 +5910,6 @@ static int __e1000_shutdown(struct pci_dev *pdev, bool *enable_wake, } ctrl = er32(CTRL); - /* advertise wake from D3Cold */ - #define E1000_CTRL_ADVD3WUC 0x00100000 - /* phy power management enable */ - #define E1000_CTRL_EN_PHY_PWR_MGMT 0x00200000 ctrl |= E1000_CTRL_ADVD3WUC; if (!(adapter->flags2 & FLAG2_HAS_PHY_WAKEUP)) ctrl |= E1000_CTRL_EN_PHY_PWR_MGMT; |