summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--Documentation/devicetree/bindings/regulator/ltc3676.txt94
-rw-r--r--Documentation/devicetree/bindings/regulator/pv88080.txt23
-rw-r--r--Documentation/devicetree/bindings/regulator/regulator.txt2
-rw-r--r--drivers/mfd/tps65218.c9
-rw-r--r--drivers/regulator/Kconfig10
-rw-r--r--drivers/regulator/Makefile1
-rw-r--r--drivers/regulator/core.c154
-rw-r--r--drivers/regulator/dbx500-prcmu.c18
-rw-r--r--drivers/regulator/devres.c7
-rw-r--r--drivers/regulator/hi6421-regulator.c3
-rw-r--r--drivers/regulator/ltc3676.c420
-rw-r--r--drivers/regulator/pv88080-regulator.c263
-rw-r--r--drivers/regulator/pv88080-regulator.h114
-rw-r--r--drivers/regulator/pwm-regulator.c10
-rw-r--r--drivers/regulator/rk808-regulator.c3
-rw-r--r--drivers/regulator/tps65218-regulator.c8
-rw-r--r--drivers/regulator/tps65910-regulator.c6
-rw-r--r--include/linux/mfd/tps65218.h6
-rw-r--r--include/linux/regulator/consumer.h3
-rw-r--r--include/linux/regulator/driver.h10
20 files changed, 981 insertions, 183 deletions
diff --git a/Documentation/devicetree/bindings/regulator/ltc3676.txt b/Documentation/devicetree/bindings/regulator/ltc3676.txt
new file mode 100644
index 0000000..d4eb366
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/ltc3676.txt
@@ -0,0 +1,94 @@
+Linear Technology LTC3676 8-output regulators
+
+Required properties:
+- compatible: "lltc,ltc3676"
+- reg: I2C slave address
+
+Required child node:
+- regulators: Contains eight regulator child nodes sw1, sw2, sw3, sw4,
+ ldo1, ldo2, ldo3, and ldo4, specifying the initialization data as
+ documented in Documentation/devicetree/bindings/regulator/regulator.txt.
+
+Each regulator is defined using the standard binding for regulators. The
+nodes for sw1, sw2, sw3, sw4, ldo1, ldo2 and ldo4 additionally need to specify
+the resistor values of their external feedback voltage dividers:
+
+Required properties (not on ldo3):
+- lltc,fb-voltage-divider: An array of two integers containing the resistor
+ values R1 and R2 of the feedback voltage divider in ohms.
+
+Regulators sw1, sw2, sw3, sw4 can regulate the feedback reference from:
+412.5mV to 800mV in 12.5 mV steps. The output voltage thus ranges between
+0.4125 * (1 + R1/R2) V and 0.8 * (1 + R1/R2) V.
+
+Regulators ldo1, ldo2, and ldo4 have a fixed 0.725 V reference and thus output
+0.725 * (1 + R1/R2) V. The ldo3 regulator is fixed to 1.8 V. The ldo1 standby
+regulator can not be disabled and thus should have the regulator-always-on
+property set.
+
+Example:
+
+ ltc3676: pmic@3c {
+ compatible = "lltc,ltc3676";
+ reg = <0x3c>;
+
+ regulators {
+ sw1_reg: sw1 {
+ regulator-min-microvolt = <674400>;
+ regulator-max-microvolt = <1308000>;
+ lltc,fb-voltage-divider = <127000 200000>;
+ regulator-ramp-delay = <7000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw2_reg: sw2 {
+ regulator-min-microvolt = <1033310>;
+ regulator-max-microvolt = <200400>;
+ lltc,fb-voltage-divider = <301000 200000>;
+ regulator-ramp-delay = <7000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw3_reg: sw3 {
+ regulator-min-microvolt = <674400>;
+ regulator-max-microvolt = <130800>;
+ lltc,fb-voltage-divider = <127000 200000>;
+ regulator-ramp-delay = <7000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ sw4_reg: sw4 {
+ regulator-min-microvolt = <868310>;
+ regulator-max-microvolt = <168400>;
+ lltc,fb-voltage-divider = <221000 200000>;
+ regulator-ramp-delay = <7000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo2_reg: ldo2 {
+ regulator-min-microvolt = <2490375>;
+ regulator-max-microvolt = <2490375>;
+ lltc,fb-voltage-divider = <487000 200000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ ldo3_reg: ldo3 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-boot-on;
+ };
+
+ ldo4_reg: ldo4 {
+ regulator-min-microvolt = <3023250>;
+ regulator-max-microvolt = <3023250>;
+ lltc,fb-voltage-divider = <634000 200000>;
+ regulator-boot-on;
+ regulator-always-on;
+ };
+ };
+ };
diff --git a/Documentation/devicetree/bindings/regulator/pv88080.txt b/Documentation/devicetree/bindings/regulator/pv88080.txt
index 38a6142..e6e4b9c 100644
--- a/Documentation/devicetree/bindings/regulator/pv88080.txt
+++ b/Documentation/devicetree/bindings/regulator/pv88080.txt
@@ -1,22 +1,28 @@
* Powerventure Semiconductor PV88080 Voltage Regulator
Required properties:
-- compatible: "pvs,pv88080".
-- reg: I2C slave address, usually 0x49.
+- compatible: Must be one of the following, depending on the
+ silicon version:
+ - "pvs,pv88080" (DEPRECATED)
+
+ - "pvs,pv88080-aa" for PV88080 AA or AB silicon
+ - "pvs,pv88080-ba" for PV88080 BA or BB silicon
+ NOTE: The use of the compatibles with no silicon version is deprecated.
+- reg: I2C slave address, usually 0x49
- interrupts: the interrupt outputs of the controller
- regulators: A node that houses a sub-node for each regulator within the
device. Each sub-node is identified using the node's name, with valid
values listed below. The content of each sub-node is defined by the
standard binding for regulators; see regulator.txt.
- BUCK1, BUCK2, and BUCK3.
+ BUCK1, BUCK2, BUCK3 and HVBUCK.
Optional properties:
- Any optional property defined in regulator.txt
-Example
+Example:
pmic: pv88080@49 {
- compatible = "pvs,pv88080";
+ compatible = "pvs,pv88080-ba";
reg = <0x49>;
interrupt-parent = <&gpio>;
interrupts = <24 24>;
@@ -45,5 +51,12 @@ Example
regulator-min-microamp = <1496000>;
regulator-max-microamp = <4189000>;
};
+
+ HVBUCK {
+ regulator-name = "hvbuck";
+ regulator-min-microvolt = < 5000>;
+ regulator-max-microvolt = <1275000>;
+ };
};
};
+
diff --git a/Documentation/devicetree/bindings/regulator/regulator.txt b/Documentation/devicetree/bindings/regulator/regulator.txt
index ecfc593..6ab5aef 100644
--- a/Documentation/devicetree/bindings/regulator/regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/regulator.txt
@@ -13,7 +13,7 @@ Optional properties:
- regulator-allow-bypass: allow the regulator to go into bypass mode
- regulator-allow-set-load: allow the regulator performance level to be configured
- <name>-supply: phandle to the parent supply/regulator node
-- regulator-ramp-delay: ramp delay for regulator(in uV/uS)
+- regulator-ramp-delay: ramp delay for regulator(in uV/us)
For hardware which supports disabling ramp rate, it should be explicitly
initialised to zero (regulator-ramp-delay = <0>) for disabling ramp delay.
- regulator-enable-ramp-delay: The time taken, in microseconds, for the supply
diff --git a/drivers/mfd/tps65218.c b/drivers/mfd/tps65218.c
index 80b9dc3..ba610ad 100644
--- a/drivers/mfd/tps65218.c
+++ b/drivers/mfd/tps65218.c
@@ -219,6 +219,7 @@ static int tps65218_probe(struct i2c_client *client,
struct tps65218 *tps;
const struct of_device_id *match;
int ret;
+ unsigned int chipid;
match = of_match_device(of_tps65218_match_table, &client->dev);
if (!match) {
@@ -250,6 +251,14 @@ static int tps65218_probe(struct i2c_client *client,
if (ret < 0)
return ret;
+ ret = tps65218_reg_read(tps, TPS65218_REG_CHIPID, &chipid);
+ if (ret) {
+ dev_err(tps->dev, "Failed to read chipid: %d\n", ret);
+ return ret;
+ }
+
+ tps->rev = chipid & TPS65218_CHIPID_REV_MASK;
+
ret = of_platform_populate(client->dev.of_node, NULL, NULL,
&client->dev);
if (ret < 0)
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 6c88e31..4c2631a 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -353,6 +353,14 @@ config REGULATOR_LTC3589
This enables support for the LTC3589, LTC3589-1, and LTC3589-2
8-output regulators controlled via I2C.
+config REGULATOR_LTC3676
+ tristate "LTC3676 8-output voltage regulator"
+ depends on I2C
+ select REGMAP_I2C
+ help
+ This enables support for the LTC3676
+ 8-output regulators controlled via I2C.
+
config REGULATOR_MAX14577
tristate "Maxim 14577/77836 regulator"
depends on MFD_MAX14577
@@ -820,7 +828,7 @@ config REGULATOR_TPS65912
This driver supports TPS65912 voltage regulator chip.
config REGULATOR_TPS80031
- tristate "TI TPS80031/TPS80032 power regualtor driver"
+ tristate "TI TPS80031/TPS80032 power regulator driver"
depends on MFD_TPS80031
help
TPS80031/ TPS80032 Fully Integrated Power Management with Power
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index f3da9ee..2142a5d 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -47,6 +47,7 @@ obj-$(CONFIG_REGULATOR_LP8788) += lp8788-buck.o
obj-$(CONFIG_REGULATOR_LP8788) += lp8788-ldo.o
obj-$(CONFIG_REGULATOR_LP8755) += lp8755.o
obj-$(CONFIG_REGULATOR_LTC3589) += ltc3589.o
+obj-$(CONFIG_REGULATOR_LTC3676) += ltc3676.o
obj-$(CONFIG_REGULATOR_MAX14577) += max14577-regulator.o
obj-$(CONFIG_REGULATOR_MAX1586) += max1586.o
obj-$(CONFIG_REGULATOR_MAX77620) += max77620-regulator.o
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index db320e8..67426c0 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -679,24 +679,6 @@ static int drms_uA_update(struct regulator_dev *rdev)
!rdev->desc->ops->set_load)
return -EINVAL;
- /* get output voltage */
- output_uV = _regulator_get_voltage(rdev);
- if (output_uV <= 0) {
- rdev_err(rdev, "invalid output voltage found\n");
- return -EINVAL;
- }
-
- /* get input voltage */
- input_uV = 0;
- if (rdev->supply)
- input_uV = regulator_get_voltage(rdev->supply);
- if (input_uV <= 0)
- input_uV = rdev->constraints->input_uV;
- if (input_uV <= 0) {
- rdev_err(rdev, "invalid input voltage found\n");
- return -EINVAL;
- }
-
/* calc total requested load */
list_for_each_entry(sibling, &rdev->consumer_list, list)
current_uA += sibling->uA_load;
@@ -709,6 +691,24 @@ static int drms_uA_update(struct regulator_dev *rdev)
if (err < 0)
rdev_err(rdev, "failed to set load %d\n", current_uA);
} else {
+ /* get output voltage */
+ output_uV = _regulator_get_voltage(rdev);
+ if (output_uV <= 0) {
+ rdev_err(rdev, "invalid output voltage found\n");
+ return -EINVAL;
+ }
+
+ /* get input voltage */
+ input_uV = 0;
+ if (rdev->supply)
+ input_uV = regulator_get_voltage(rdev->supply);
+ if (input_uV <= 0)
+ input_uV = rdev->constraints->input_uV;
+ if (input_uV <= 0) {
+ rdev_err(rdev, "invalid input voltage found\n");
+ return -EINVAL;
+ }
+
/* now get the optimum mode for our new total regulator load */
mode = rdev->desc->ops->get_optimum_mode(rdev, input_uV,
output_uV, current_uA);
@@ -2743,6 +2743,24 @@ static int _regulator_call_set_voltage_sel(struct regulator_dev *rdev,
return ret;
}
+static int _regulator_set_voltage_time(struct regulator_dev *rdev,
+ int old_uV, int new_uV)
+{
+ unsigned int ramp_delay = 0;
+
+ if (rdev->constraints->ramp_delay)
+ ramp_delay = rdev->constraints->ramp_delay;
+ else if (rdev->desc->ramp_delay)
+ ramp_delay = rdev->desc->ramp_delay;
+
+ if (ramp_delay == 0) {
+ rdev_warn(rdev, "ramp_delay not set\n");
+ return 0;
+ }
+
+ return DIV_ROUND_UP(abs(new_uV - old_uV), ramp_delay);
+}
+
static int _regulator_do_set_voltage(struct regulator_dev *rdev,
int min_uV, int max_uV)
{
@@ -2751,6 +2769,8 @@ static int _regulator_do_set_voltage(struct regulator_dev *rdev,
int best_val = 0;
unsigned int selector;
int old_selector = -1;
+ const struct regulator_ops *ops = rdev->desc->ops;
+ int old_uV = _regulator_get_voltage(rdev);
trace_regulator_set_voltage(rdev_get_name(rdev), min_uV, max_uV);
@@ -2762,29 +2782,28 @@ static int _regulator_do_set_voltage(struct regulator_dev *rdev,
* info to call set_voltage_time_sel().
*/
if (_regulator_is_enabled(rdev) &&
- rdev->desc->ops->set_voltage_time_sel &&
- rdev->desc->ops->get_voltage_sel) {
- old_selector = rdev->desc->ops->get_voltage_sel(rdev);
+ ops->set_voltage_time_sel && ops->get_voltage_sel) {
+ old_selector = ops->get_voltage_sel(rdev);
if (old_selector < 0)
return old_selector;
}
- if (rdev->desc->ops->set_voltage) {
+ if (ops->set_voltage) {
ret = _regulator_call_set_voltage(rdev, min_uV, max_uV,
&selector);
if (ret >= 0) {
- if (rdev->desc->ops->list_voltage)
- best_val = rdev->desc->ops->list_voltage(rdev,
- selector);
+ if (ops->list_voltage)
+ best_val = ops->list_voltage(rdev,
+ selector);
else
best_val = _regulator_get_voltage(rdev);
}
- } else if (rdev->desc->ops->set_voltage_sel) {
+ } else if (ops->set_voltage_sel) {
ret = regulator_map_voltage(rdev, min_uV, max_uV);
if (ret >= 0) {
- best_val = rdev->desc->ops->list_voltage(rdev, ret);
+ best_val = ops->list_voltage(rdev, ret);
if (min_uV <= best_val && max_uV >= best_val) {
selector = ret;
if (old_selector == selector)
@@ -2800,34 +2819,50 @@ static int _regulator_do_set_voltage(struct regulator_dev *rdev,
ret = -EINVAL;
}
- /* Call set_voltage_time_sel if successfully obtained old_selector */
- if (ret == 0 && !rdev->constraints->ramp_disable && old_selector >= 0
- && old_selector != selector) {
+ if (ret)
+ goto out;
- delay = rdev->desc->ops->set_voltage_time_sel(rdev,
- old_selector, selector);
- if (delay < 0) {
- rdev_warn(rdev, "set_voltage_time_sel() failed: %d\n",
- delay);
- delay = 0;
+ if (ops->set_voltage_time_sel) {
+ /*
+ * Call set_voltage_time_sel if successfully obtained
+ * old_selector
+ */
+ if (old_selector >= 0 && old_selector != selector)
+ delay = ops->set_voltage_time_sel(rdev, old_selector,
+ selector);
+ } else {
+ if (old_uV != best_val) {
+ if (ops->set_voltage_time)
+ delay = ops->set_voltage_time(rdev, old_uV,
+ best_val);
+ else
+ delay = _regulator_set_voltage_time(rdev,
+ old_uV,
+ best_val);
}
+ }
- /* Insert any necessary delays */
- if (delay >= 1000) {
- mdelay(delay / 1000);
- udelay(delay % 1000);
- } else if (delay) {
- udelay(delay);
- }
+ if (delay < 0) {
+ rdev_warn(rdev, "failed to get delay: %d\n", delay);
+ delay = 0;
}
- if (ret == 0 && best_val >= 0) {
+ /* Insert any necessary delays */
+ if (delay >= 1000) {
+ mdelay(delay / 1000);
+ udelay(delay % 1000);
+ } else if (delay) {
+ udelay(delay);
+ }
+
+ if (best_val >= 0) {
unsigned long data = best_val;
_notifier_call_chain(rdev, REGULATOR_EVENT_VOLTAGE_CHANGE,
(void *)data);
}
+out:
trace_regulator_set_voltage_complete(rdev_get_name(rdev), best_val);
return ret;
@@ -2998,9 +3033,13 @@ int regulator_set_voltage_time(struct regulator *regulator,
int voltage;
int i;
+ if (ops->set_voltage_time)
+ return ops->set_voltage_time(rdev, old_uV, new_uV);
+ else if (!ops->set_voltage_time_sel)
+ return _regulator_set_voltage_time(rdev, old_uV, new_uV);
+
/* Currently requires operations to do this */
- if (!ops->list_voltage || !ops->set_voltage_time_sel
- || !rdev->desc->n_voltages)
+ if (!ops->list_voltage || !rdev->desc->n_voltages)
return -EINVAL;
for (i = 0; i < rdev->desc->n_voltages; i++) {
@@ -3039,19 +3078,8 @@ int regulator_set_voltage_time_sel(struct regulator_dev *rdev,
unsigned int old_selector,
unsigned int new_selector)
{
- unsigned int ramp_delay = 0;
int old_volt, new_volt;
- if (rdev->constraints->ramp_delay)
- ramp_delay = rdev->constraints->ramp_delay;
- else if (rdev->desc->ramp_delay)
- ramp_delay = rdev->desc->ramp_delay;
-
- if (ramp_delay == 0) {
- rdev_warn(rdev, "ramp_delay not set\n");
- return 0;
- }
-
/* sanity check */
if (!rdev->desc->ops->list_voltage)
return -EINVAL;
@@ -3059,7 +3087,11 @@ int regulator_set_voltage_time_sel(struct regulator_dev *rdev,
old_volt = rdev->desc->ops->list_voltage(rdev, old_selector);
new_volt = rdev->desc->ops->list_voltage(rdev, new_selector);
- return DIV_ROUND_UP(abs(new_volt - old_volt), ramp_delay);
+ if (rdev->desc->ops->set_voltage_time)
+ return rdev->desc->ops->set_voltage_time(rdev, old_volt,
+ new_volt);
+ else
+ return _regulator_set_voltage_time(rdev, old_volt, new_volt);
}
EXPORT_SYMBOL_GPL(regulator_set_voltage_time_sel);
@@ -3483,10 +3515,8 @@ int regulator_bulk_get(struct device *dev, int num_consumers,
consumers[i].consumer = NULL;
for (i = 0; i < num_consumers; i++) {
- consumers[i].consumer = _regulator_get(dev,
- consumers[i].supply,
- false,
- !consumers[i].optional);
+ consumers[i].consumer = regulator_get(dev,
+ consumers[i].supply);
if (IS_ERR(consumers[i].consumer)) {
ret = PTR_ERR(consumers[i].consumer);
dev_err(dev, "Failed to get supply '%s': %d\n",
diff --git a/drivers/regulator/dbx500-prcmu.c b/drivers/regulator/dbx500-prcmu.c
index 3963dfa..8976141 100644
--- a/drivers/regulator/dbx500-prcmu.c
+++ b/drivers/regulator/dbx500-prcmu.c
@@ -75,24 +75,6 @@ static struct ux500_regulator_debug {
u8 *state_after_suspend;
} rdebug;
-void ux500_regulator_suspend_debug(void)
-{
- int i;
-
- for (i = 0; i < rdebug.num_regulators; i++)
- rdebug.state_before_suspend[i] =
- rdebug.regulator_array[i].is_enabled;
-}
-
-void ux500_regulator_resume_debug(void)
-{
- int i;
-
- for (i = 0; i < rdebug.num_regulators; i++)
- rdebug.state_after_suspend[i] =
- rdebug.regulator_array[i].is_enabled;
-}
-
static int ux500_regulator_power_state_cnt_print(struct seq_file *s, void *p)
{
/* print power state count */
diff --git a/drivers/regulator/devres.c b/drivers/regulator/devres.c
index 6ad8ab4..6ec1d40 100644
--- a/drivers/regulator/devres.c
+++ b/drivers/regulator/devres.c
@@ -164,11 +164,8 @@ int devm_regulator_bulk_get(struct device *dev, int num_consumers,
consumers[i].consumer = NULL;
for (i = 0; i < num_consumers; i++) {
- consumers[i].consumer = _devm_regulator_get(dev,
- consumers[i].supply,
- consumers[i].optional ?
- OPTIONAL_GET :
- NORMAL_GET);
+ consumers[i].consumer = devm_regulator_get(dev,
+ consumers[i].supply);
if (IS_ERR(consumers[i].consumer)) {
ret = PTR_ERR(consumers[i].consumer);
dev_err(dev, "Failed to get supply '%s': %d\n",
diff --git a/drivers/regulator/hi6421-regulator.c b/drivers/regulator/hi6421-regulator.c
index 42dc5fb..62c5f54 100644
--- a/drivers/regulator/hi6421-regulator.c
+++ b/drivers/regulator/hi6421-regulator.c
@@ -477,7 +477,8 @@ static int hi6421_regulator_buck_set_mode(struct regulator_dev *rdev,
return 0;
}
-unsigned int hi6421_regulator_ldo_get_optimum_mode(struct regulator_dev *rdev,
+static unsigned int
+hi6421_regulator_ldo_get_optimum_mode(struct regulator_dev *rdev,
int input_uV, int output_uV, int load_uA)
{
struct hi6421_regulator_info *info = rdev_get_drvdata(rdev);
diff --git a/drivers/regulator/ltc3676.c b/drivers/regulator/ltc3676.c
new file mode 100644
index 0000000..e2b476c
--- /dev/null
+++ b/drivers/regulator/ltc3676.c
@@ -0,0 +1,420 @@
+/*
+ * Copyright (C) 2016 Gateworks Corporation, Inc. All Rights Reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/of.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/of_regulator.h>
+
+#define DRIVER_NAME "ltc3676"
+
+/* LTC3676 Registers */
+#define LTC3676_BUCK1 0x01
+#define LTC3676_BUCK2 0x02
+#define LTC3676_BUCK3 0x03
+#define LTC3676_BUCK4 0x04
+#define LTC3676_LDOA 0x05
+#define LTC3676_LDOB 0x06
+#define LTC3676_SQD1 0x07
+#define LTC3676_SQD2 0x08
+#define LTC3676_CNTRL 0x09
+#define LTC3676_DVB1A 0x0A
+#define LTC3676_DVB1B 0x0B
+#define LTC3676_DVB2A 0x0C
+#define LTC3676_DVB2B 0x0D
+#define LTC3676_DVB3A 0x0E
+#define LTC3676_DVB3B 0x0F
+#define LTC3676_DVB4A 0x10
+#define LTC3676_DVB4B 0x11
+#define LTC3676_MSKIRQ 0x12
+#define LTC3676_MSKPG 0x13
+#define LTC3676_USER 0x14
+#define LTC3676_IRQSTAT 0x15
+#define LTC3676_PGSTATL 0x16
+#define LTC3676_PGSTATRT 0x17
+#define LTC3676_HRST 0x1E
+#define LTC3676_CLIRQ 0x1F
+
+#define LTC3676_DVBxA_REF_SELECT BIT(5)
+
+#define LTC3676_IRQSTAT_PGOOD_TIMEOUT BIT(3)
+#define LTC3676_IRQSTAT_UNDERVOLT_WARN BIT(4)
+#define LTC3676_IRQSTAT_UNDERVOLT_FAULT BIT(5)
+#define LTC3676_IRQSTAT_THERMAL_WARN BIT(6)
+#define LTC3676_IRQSTAT_THERMAL_FAULT BIT(7)
+
+enum ltc3676_reg {
+ LTC3676_SW1,
+ LTC3676_SW2,
+ LTC3676_SW3,
+ LTC3676_SW4,
+ LTC3676_LDO1,
+ LTC3676_LDO2,
+ LTC3676_LDO3,
+ LTC3676_LDO4,
+ LTC3676_NUM_REGULATORS,
+};
+
+struct ltc3676 {
+ struct regmap *regmap;
+ struct device *dev;
+ struct regulator_desc regulator_descs[LTC3676_NUM_REGULATORS];
+ struct regulator_dev *regulators[LTC3676_NUM_REGULATORS];
+};
+
+static int ltc3676_set_suspend_voltage(struct regulator_dev *rdev, int uV)
+{
+ struct ltc3676 *ltc3676 = rdev_get_drvdata(rdev);
+ struct device *dev = ltc3676->dev;
+ int dcdc = rdev_get_id(rdev);
+ int sel;
+
+ dev_dbg(dev, "%s id=%d uV=%d\n", __func__, dcdc, uV);
+ sel = regulator_map_voltage_linear(rdev, uV, uV);
+ if (sel < 0)
+ return sel;
+
+ /* DVBB register follows right after the corresponding DVBA register */
+ return regmap_update_bits(ltc3676->regmap, rdev->desc->vsel_reg + 1,
+ rdev->desc->vsel_mask, sel);
+}
+
+static int ltc3676_set_suspend_mode(struct regulator_dev *rdev,
+ unsigned int mode)
+{
+ struct ltc3676 *ltc3676= rdev_get_drvdata(rdev);
+ struct device *dev = ltc3676->dev;
+ int mask, val;
+ int dcdc = rdev_get_id(rdev);
+
+ dev_dbg(dev, "%s id=%d mode=%d\n", __func__, dcdc, mode);
+
+ mask = LTC3676_DVBxA_REF_SELECT;
+ switch (mode) {
+ case REGULATOR_MODE_STANDBY:
+ val = 0; /* select DVBxA */
+ break;
+ case REGULATOR_MODE_NORMAL:
+ val = LTC3676_DVBxA_REF_SELECT; /* select DVBxB */
+ break;
+ default:
+ dev_warn(&rdev->dev, "%s: regulator mode: 0x%x not supported\n",
+ rdev->desc->name, mode);
+ return -EINVAL;
+ }
+
+ return regmap_update_bits(ltc3676->regmap, rdev->desc->vsel_reg,
+ mask, val);
+}
+
+static inline unsigned int ltc3676_scale(unsigned int uV, u32 r1, u32 r2)
+{
+ uint64_t tmp;
+ if (uV == 0)
+ return 0;
+ tmp = (uint64_t)uV * r1;
+ do_div(tmp, r2);
+ return uV + (unsigned int)tmp;
+}
+
+static int ltc3676_of_parse_cb(struct device_node *np,
+ const struct regulator_desc *desc,
+ struct regulator_config *config)
+{
+ struct ltc3676 *ltc3676 = config->driver_data;
+ struct regulator_desc *rdesc = &ltc3676->regulator_descs[desc->id];
+ u32 r[2];
+ int ret;
+
+ /* LDO3 has a fixed output */
+ if (desc->id == LTC3676_LDO3)
+ return 0;
+
+ ret = of_property_read_u32_array(np, "lltc,fb-voltage-divider", r, 2);
+ if (ret) {
+ dev_err(ltc3676->dev, "Failed to parse voltage divider: %d\n",
+ ret);
+ return ret;
+ }
+
+ rdesc->min_uV = ltc3676_scale(desc->min_uV, r[0], r[1]);
+ rdesc->uV_step = ltc3676_scale(desc->uV_step, r[0], r[1]);
+ rdesc->fixed_uV = ltc3676_scale(desc->fixed_uV, r[0], r[1]);
+
+ return 0;
+}
+
+/* SW1, SW2, SW3, SW4 linear 0.8V-3.3V with scalar via R1/R2 feeback res */
+static struct regulator_ops ltc3676_linear_regulator_ops = {
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .list_voltage = regulator_list_voltage_linear,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .set_suspend_voltage = ltc3676_set_suspend_voltage,
+ .set_suspend_mode = ltc3676_set_suspend_mode,
+};
+
+/* LDO1 always on fixed 0.8V-3.3V via scalar via R1/R2 feeback res */
+static struct regulator_ops ltc3676_fixed_standby_regulator_ops = {
+};
+
+/* LDO2, LDO3 fixed (LDO2 has external scalar via R1/R2 feedback res) */
+static struct regulator_ops ltc3676_fixed_regulator_ops = {
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+};
+
+#define LTC3676_REG(_id, _name, _ops, en_reg, en_bit, dvba_reg, dvb_mask) \
+ [LTC3676_ ## _id] = { \
+ .name = #_name, \
+ .of_match = of_match_ptr(#_name), \
+ .regulators_node = of_match_ptr("regulators"), \
+ .of_parse_cb = ltc3676_of_parse_cb, \
+ .n_voltages = (dvb_mask) + 1, \
+ .min_uV = (dvba_reg) ? 412500 : 0, \
+ .uV_step = (dvba_reg) ? 12500 : 0, \
+ .ramp_delay = (dvba_reg) ? 800 : 0, \
+ .fixed_uV = (dvb_mask) ? 0 : 725000, \
+ .ops = &ltc3676_ ## _ops ## _regulator_ops, \
+ .type = REGULATOR_VOLTAGE, \
+ .id = LTC3676_ ## _id, \
+ .owner = THIS_MODULE, \
+ .vsel_reg = (dvba_reg), \
+ .vsel_mask = (dvb_mask), \
+ .enable_reg = (en_reg), \
+ .enable_mask = (1 << en_bit), \
+ }
+
+#define LTC3676_LINEAR_REG(_id, _name, _en, _dvba) \
+ LTC3676_REG(_id, _name, linear, \
+ LTC3676_ ## _en, 7, \
+ LTC3676_ ## _dvba, 0x1f)
+
+#define LTC3676_FIXED_REG(_id, _name, _en_reg, _en_bit) \
+ LTC3676_REG(_id, _name, fixed, LTC3676_ ## _en_reg, _en_bit, 0, 0)
+
+static struct regulator_desc ltc3676_regulators[LTC3676_NUM_REGULATORS] = {
+ LTC3676_LINEAR_REG(SW1, sw1, BUCK1, DVB1A),
+ LTC3676_LINEAR_REG(SW2, sw2, BUCK2, DVB2A),
+ LTC3676_LINEAR_REG(SW3, sw3, BUCK3, DVB3A),
+ LTC3676_LINEAR_REG(SW4, sw4, BUCK4, DVB4A),
+ LTC3676_REG(LDO1, ldo1, fixed_standby, 0, 0, 0, 0),
+ LTC3676_FIXED_REG(LDO2, ldo2, LDOA, 2),
+ LTC3676_FIXED_REG(LDO3, ldo3, LDOA, 5),
+ LTC3676_FIXED_REG(LDO4, ldo4, LDOB, 2),
+};
+
+static bool ltc3676_writeable_reg(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case LTC3676_IRQSTAT:
+ case LTC3676_BUCK1:
+ case LTC3676_BUCK2:
+ case LTC3676_BUCK3:
+ case LTC3676_BUCK4:
+ case LTC3676_LDOA:
+ case LTC3676_LDOB:
+ case LTC3676_SQD1:
+ case LTC3676_SQD2:
+ case LTC3676_CNTRL:
+ case LTC3676_DVB1A:
+ case LTC3676_DVB1B:
+ case LTC3676_DVB2A:
+ case LTC3676_DVB2B:
+ case LTC3676_DVB3A:
+ case LTC3676_DVB3B:
+ case LTC3676_DVB4A:
+ case LTC3676_DVB4B:
+ case LTC3676_MSKIRQ:
+ case LTC3676_MSKPG:
+ case LTC3676_USER:
+ case LTC3676_HRST:
+ case LTC3676_CLIRQ:
+ return true;
+ }
+ return false;
+}
+
+static bool ltc3676_readable_reg(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case LTC3676_IRQSTAT:
+ case LTC3676_BUCK1:
+ case LTC3676_BUCK2:
+ case LTC3676_BUCK3:
+ case LTC3676_BUCK4:
+ case LTC3676_LDOA:
+ case LTC3676_LDOB:
+ case LTC3676_SQD1:
+ case LTC3676_SQD2:
+ case LTC3676_CNTRL:
+ case LTC3676_DVB1A:
+ case LTC3676_DVB1B:
+ case LTC3676_DVB2A:
+ case LTC3676_DVB2B:
+ case LTC3676_DVB3A:
+ case LTC3676_DVB3B:
+ case LTC3676_DVB4A:
+ case LTC3676_DVB4B:
+ case LTC3676_MSKIRQ:
+ case LTC3676_MSKPG:
+ case LTC3676_USER:
+ case LTC3676_HRST:
+ case LTC3676_CLIRQ:
+ return true;
+ }
+ return false;
+}
+
+static bool ltc3676_volatile_reg(struct device *dev, unsigned int reg)
+{
+ switch (reg) {
+ case LTC3676_IRQSTAT:
+ case LTC3676_PGSTATL:
+ case LTC3676_PGSTATRT:
+ return true;
+ }
+ return false;
+}
+
+static const struct regmap_config ltc3676_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 8,
+ .writeable_reg = ltc3676_writeable_reg,
+ .readable_reg = ltc3676_readable_reg,
+ .volatile_reg = ltc3676_volatile_reg,
+ .max_register = LTC3676_CLIRQ,
+ .use_single_rw = true,
+ .cache_type = REGCACHE_RBTREE,
+};
+
+static irqreturn_t ltc3676_isr(int irq, void *dev_id)
+{
+ struct ltc3676 *ltc3676 = dev_id;
+ struct device *dev = ltc3676->dev;
+ unsigned int i, irqstat, event;
+
+ regmap_read(ltc3676->regmap, LTC3676_IRQSTAT, &irqstat);
+
+ dev_dbg(dev, "irq%d irqstat=0x%02x\n", irq, irqstat);
+ if (irqstat & LTC3676_IRQSTAT_THERMAL_WARN) {
+ dev_warn(dev, "Over-temperature Warning\n");
+ event = REGULATOR_EVENT_OVER_TEMP;
+ for (i = 0; i < LTC3676_NUM_REGULATORS; i++)
+ regulator_notifier_call_chain(ltc3676->regulators[i],
+ event, NULL);
+ }
+
+ if (irqstat & LTC3676_IRQSTAT_UNDERVOLT_WARN) {
+ dev_info(dev, "Undervoltage Warning\n");
+ event = REGULATOR_EVENT_UNDER_VOLTAGE;
+ for (i = 0; i < LTC3676_NUM_REGULATORS; i++)
+ regulator_notifier_call_chain(ltc3676->regulators[i],
+ event, NULL);
+ }
+
+ /* Clear warning condition */
+ regmap_write(ltc3676->regmap, LTC3676_CLIRQ, 0);
+
+ return IRQ_HANDLED;
+}
+
+static int ltc3676_regulator_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct device *dev = &client->dev;
+ struct regulator_init_data *init_data = dev_get_platdata(dev);
+ struct regulator_desc *descs;
+ struct ltc3676 *ltc3676;
+ int i, ret;
+
+ ltc3676 = devm_kzalloc(dev, sizeof(*ltc3676), GFP_KERNEL);
+ if (!ltc3676)
+ return -ENOMEM;
+
+ i2c_set_clientdata(client, ltc3676);
+ ltc3676->dev = dev;
+
+ descs = ltc3676->regulator_descs;
+ memcpy(descs, ltc3676_regulators, sizeof(ltc3676_regulators));
+ descs[LTC3676_LDO3].fixed_uV = 1800000; /* LDO3 is fixed 1.8V */
+
+ ltc3676->regmap = devm_regmap_init_i2c(client, &ltc3676_regmap_config);
+ if (IS_ERR(ltc3676->regmap)) {
+ ret = PTR_ERR(ltc3676->regmap);
+ dev_err(dev, "failed to initialize regmap: %d\n", ret);
+ return ret;
+ }
+
+ for (i = 0; i < LTC3676_NUM_REGULATORS; i++) {
+ struct regulator_desc *desc = &ltc3676->regulator_descs[i];
+ struct regulator_config config = { };
+
+ if (init_data)
+ config.init_data = &init_data[i];
+
+ config.dev = dev;
+ config.driver_data = ltc3676;
+
+ ltc3676->regulators[i] = devm_regulator_register(dev, desc,
+ &config);
+ if (IS_ERR(ltc3676->regulators[i])) {
+ ret = PTR_ERR(ltc3676->regulators[i]);
+ dev_err(dev, "failed to register regulator %s: %d\n",
+ desc->name, ret);
+ return ret;
+ }
+ }
+
+ regmap_write(ltc3676->regmap, LTC3676_CLIRQ, 0);
+ if (client->irq) {
+ ret = devm_request_threaded_irq(dev, client->irq, NULL,
+ ltc3676_isr,
+ IRQF_TRIGGER_LOW | IRQF_ONESHOT,
+ client->name, ltc3676);
+ if (ret) {
+ dev_err(dev, "Failed to request IRQ: %d\n", ret);
+ return ret;
+ }
+ }
+
+ return 0;
+}
+
+static const struct i2c_device_id ltc3676_i2c_id[] = {
+ { "ltc3676" },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, ltc3676_i2c_id);
+
+static struct i2c_driver ltc3676_driver = {
+ .driver = {
+ .name = DRIVER_NAME,
+ },
+ .probe = ltc3676_regulator_probe,
+ .id_table = ltc3676_i2c_id,
+};
+module_i2c_driver(ltc3676_driver);
+
+MODULE_AUTHOR("Tim Harvey <tharvey@gateworks.com>");
+MODULE_DESCRIPTION("Regulator driver for Linear Technology LTC1376");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/regulator/pv88080-regulator.c b/drivers/regulator/pv88080-regulator.c
index 81950bd..954a20e 100644
--- a/drivers/regulator/pv88080-regulator.c
+++ b/drivers/regulator/pv88080-regulator.c
@@ -16,6 +16,7 @@
#include <linux/err.h>
#include <linux/i2c.h>
#include <linux/module.h>
+#include <linux/of.h>
#include <linux/init.h>
#include <linux/slab.h>
#include <linux/regulator/driver.h>
@@ -26,7 +27,7 @@
#include <linux/regulator/of_regulator.h>
#include "pv88080-regulator.h"
-#define PV88080_MAX_REGULATORS 3
+#define PV88080_MAX_REGULATORS 4
/* PV88080 REGULATOR IDs */
enum {
@@ -34,6 +35,12 @@ enum {
PV88080_ID_BUCK1,
PV88080_ID_BUCK2,
PV88080_ID_BUCK3,
+ PV88080_ID_HVBUCK,
+};
+
+enum pv88080_types {
+ TYPE_PV88080_AA,
+ TYPE_PV88080_BA,
};
struct pv88080_regulator {
@@ -42,7 +49,8 @@ struct pv88080_regulator {
unsigned int n_current_limits;
const int *current_limits;
unsigned int limit_mask;
- unsigned int conf;
+ unsigned int mode_reg;
+ unsigned int limit_reg;
unsigned int conf2;
unsigned int conf5;
};
@@ -51,6 +59,8 @@ struct pv88080 {
struct device *dev;
struct regmap *regmap;
struct regulator_dev *rdev[PV88080_MAX_REGULATORS];
+ unsigned long type;
+ const struct pv88080_compatible_regmap *regmap_config;
};
struct pv88080_buck_voltage {
@@ -59,6 +69,30 @@ struct pv88080_buck_voltage {
int uV_step;
};
+struct pv88080_buck_regmap {
+ /* REGS */
+ int buck_enable_reg;
+ int buck_vsel_reg;
+ int buck_mode_reg;
+ int buck_limit_reg;
+ int buck_vdac_range_reg;
+ int buck_vrange_gain_reg;
+ /* MASKS */
+ int buck_enable_mask;
+ int buck_vsel_mask;
+ int buck_limit_mask;
+};
+
+struct pv88080_compatible_regmap {
+ /* BUCK1, 2, 3 */
+ struct pv88080_buck_regmap buck_regmap[PV88080_MAX_REGULATORS-1];
+ /* HVBUCK */
+ int hvbuck_enable_reg;
+ int hvbuck_vsel_reg;
+ int hvbuck_enable_mask;
+ int hvbuck_vsel_mask;
+};
+
static const struct regmap_config pv88080_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
@@ -89,13 +123,111 @@ static const struct pv88080_buck_voltage pv88080_buck_vol[2] = {
},
};
+static const struct pv88080_compatible_regmap pv88080_aa_regs = {
+ /* BUCK1 */
+ .buck_regmap[0] = {
+ .buck_enable_reg = PV88080AA_REG_BUCK1_CONF0,
+ .buck_vsel_reg = PV88080AA_REG_BUCK1_CONF0,
+ .buck_mode_reg = PV88080AA_REG_BUCK1_CONF1,
+ .buck_limit_reg = PV88080AA_REG_BUCK1_CONF1,
+ .buck_vdac_range_reg = PV88080AA_REG_BUCK1_CONF2,
+ .buck_vrange_gain_reg = PV88080AA_REG_BUCK1_CONF5,
+ .buck_enable_mask = PV88080_BUCK1_EN,
+ .buck_vsel_mask = PV88080_VBUCK1_MASK,
+ .buck_limit_mask = PV88080_BUCK1_ILIM_MASK,
+ },
+ /* BUCK2 */
+ .buck_regmap[1] = {
+ .buck_enable_reg = PV88080AA_REG_BUCK2_CONF0,
+ .buck_vsel_reg = PV88080AA_REG_BUCK2_CONF0,
+ .buck_mode_reg = PV88080AA_REG_BUCK2_CONF1,
+ .buck_limit_reg = PV88080AA_REG_BUCK2_CONF1,
+ .buck_vdac_range_reg = PV88080AA_REG_BUCK2_CONF2,
+ .buck_vrange_gain_reg = PV88080AA_REG_BUCK2_CONF5,
+ .buck_enable_mask = PV88080_BUCK2_EN,
+ .buck_vsel_mask = PV88080_VBUCK2_MASK,
+ .buck_limit_mask = PV88080_BUCK2_ILIM_MASK,
+ },
+ /* BUCK3 */
+ .buck_regmap[2] = {
+ .buck_enable_reg = PV88080AA_REG_BUCK3_CONF0,
+ .buck_vsel_reg = PV88080AA_REG_BUCK3_CONF0,
+ .buck_mode_reg = PV88080AA_REG_BUCK3_CONF1,
+ .buck_limit_reg = PV88080AA_REG_BUCK3_CONF1,
+ .buck_vdac_range_reg = PV88080AA_REG_BUCK3_CONF2,
+ .buck_vrange_gain_reg = PV88080AA_REG_BUCK3_CONF5,
+ .buck_enable_mask = PV88080_BUCK3_EN,
+ .buck_vsel_mask = PV88080_VBUCK3_MASK,
+ .buck_limit_mask = PV88080_BUCK3_ILIM_MASK,
+ },
+ /* HVBUCK */
+ .hvbuck_enable_reg = PV88080AA_REG_HVBUCK_CONF2,
+ .hvbuck_vsel_reg = PV88080AA_REG_HVBUCK_CONF1,
+ .hvbuck_enable_mask = PV88080_HVBUCK_EN,
+ .hvbuck_vsel_mask = PV88080_VHVBUCK_MASK,
+};
+
+static const struct pv88080_compatible_regmap pv88080_ba_regs = {
+ /* BUCK1 */
+ .buck_regmap[0] = {
+ .buck_enable_reg = PV88080BA_REG_BUCK1_CONF0,
+ .buck_vsel_reg = PV88080BA_REG_BUCK1_CONF0,
+ .buck_mode_reg = PV88080BA_REG_BUCK1_CONF1,
+ .buck_limit_reg = PV88080BA_REG_BUCK1_CONF1,
+ .buck_vdac_range_reg = PV88080BA_REG_BUCK1_CONF2,
+ .buck_vrange_gain_reg = PV88080BA_REG_BUCK1_CONF5,
+ .buck_enable_mask = PV88080_BUCK1_EN,
+ .buck_vsel_mask = PV88080_VBUCK1_MASK,
+ .buck_limit_mask = PV88080_BUCK1_ILIM_MASK,
+ },
+ /* BUCK2 */
+ .buck_regmap[1] = {
+ .buck_enable_reg = PV88080BA_REG_BUCK2_CONF0,
+ .buck_vsel_reg = PV88080BA_REG_BUCK2_CONF0,
+ .buck_mode_reg = PV88080BA_REG_BUCK2_CONF1,
+ .buck_limit_reg = PV88080BA_REG_BUCK2_CONF1,
+ .buck_vdac_range_reg = PV88080BA_REG_BUCK2_CONF2,
+ .buck_vrange_gain_reg = PV88080BA_REG_BUCK2_CONF5,
+ .buck_enable_mask = PV88080_BUCK2_EN,
+ .buck_vsel_mask = PV88080_VBUCK2_MASK,
+ .buck_limit_mask = PV88080_BUCK2_ILIM_MASK,
+ },
+ /* BUCK3 */
+ .buck_regmap[2] = {
+ .buck_enable_reg = PV88080BA_REG_BUCK3_CONF0,
+ .buck_vsel_reg = PV88080BA_REG_BUCK3_CONF0,
+ .buck_mode_reg = PV88080BA_REG_BUCK3_CONF1,
+ .buck_limit_reg = PV88080BA_REG_BUCK3_CONF1,
+ .buck_vdac_range_reg = PV88080BA_REG_BUCK3_CONF2,
+ .buck_vrange_gain_reg = PV88080BA_REG_BUCK3_CONF5,
+ .buck_enable_mask = PV88080_BUCK3_EN,
+ .buck_vsel_mask = PV88080_VBUCK3_MASK,
+ .buck_limit_mask = PV88080_BUCK3_ILIM_MASK,
+ },
+ /* HVBUCK */
+ .hvbuck_enable_reg = PV88080BA_REG_HVBUCK_CONF2,
+ .hvbuck_vsel_reg = PV88080BA_REG_HVBUCK_CONF1,
+ .hvbuck_enable_mask = PV88080_HVBUCK_EN,
+ .hvbuck_vsel_mask = PV88080_VHVBUCK_MASK,
+};
+
+#ifdef CONFIG_OF
+static const struct of_device_id pv88080_dt_ids[] = {
+ { .compatible = "pvs,pv88080", .data = (void *)TYPE_PV88080_AA },
+ { .compatible = "pvs,pv88080-aa", .data = (void *)TYPE_PV88080_AA },
+ { .compatible = "pvs,pv88080-ba", .data = (void *)TYPE_PV88080_BA },
+ {},
+};
+MODULE_DEVICE_TABLE(of, pv88080_dt_ids);
+#endif
+
static unsigned int pv88080_buck_get_mode(struct regulator_dev *rdev)
{
struct pv88080_regulator *info = rdev_get_drvdata(rdev);
unsigned int data;
int ret, mode = 0;
- ret = regmap_read(rdev->regmap, info->conf, &data);
+ ret = regmap_read(rdev->regmap, info->mode_reg, &data);
if (ret < 0)
return ret;
@@ -136,7 +268,7 @@ static int pv88080_buck_set_mode(struct regulator_dev *rdev,
return -EINVAL;
}
- return regmap_update_bits(rdev->regmap, info->conf,
+ return regmap_update_bits(rdev->regmap, info->mode_reg,
PV88080_BUCK1_MODE_MASK, val);
}
@@ -151,7 +283,7 @@ static int pv88080_set_current_limit(struct regulator_dev *rdev, int min,
if (min <= info->current_limits[i]
&& max >= info->current_limits[i]) {
return regmap_update_bits(rdev->regmap,
- info->conf,
+ info->limit_reg,
info->limit_mask,
i << PV88080_BUCK1_ILIM_SHIFT);
}
@@ -166,7 +298,7 @@ static int pv88080_get_current_limit(struct regulator_dev *rdev)
unsigned int data;
int ret;
- ret = regmap_read(rdev->regmap, info->conf, &data);
+ ret = regmap_read(rdev->regmap, info->limit_reg, &data);
if (ret < 0)
return ret;
@@ -187,6 +319,15 @@ static struct regulator_ops pv88080_buck_ops = {
.get_current_limit = pv88080_get_current_limit,
};
+static struct regulator_ops pv88080_hvbuck_ops = {
+ .enable = regulator_enable_regmap,
+ .disable = regulator_disable_regmap,
+ .is_enabled = regulator_is_enabled_regmap,
+ .set_voltage_sel = regulator_set_voltage_sel_regmap,
+ .get_voltage_sel = regulator_get_voltage_sel_regmap,
+ .list_voltage = regulator_list_voltage_linear,
+};
+
#define PV88080_BUCK(chip, regl_name, min, step, max, limits_array) \
{\
.desc = {\
@@ -200,17 +341,25 @@ static struct regulator_ops pv88080_buck_ops = {
.min_uV = min, \
.uV_step = step, \
.n_voltages = ((max) - (min))/(step) + 1, \
- .enable_reg = PV88080_REG_##regl_name##_CONF0, \
- .enable_mask = PV88080_##regl_name##_EN, \
- .vsel_reg = PV88080_REG_##regl_name##_CONF0, \
- .vsel_mask = PV88080_V##regl_name##_MASK, \
},\
.current_limits = limits_array, \
.n_current_limits = ARRAY_SIZE(limits_array), \
- .limit_mask = PV88080_##regl_name##_ILIM_MASK, \
- .conf = PV88080_REG_##regl_name##_CONF1, \
- .conf2 = PV88080_REG_##regl_name##_CONF2, \
- .conf5 = PV88080_REG_##regl_name##_CONF5, \
+}
+
+#define PV88080_HVBUCK(chip, regl_name, min, step, max) \
+{\
+ .desc = {\
+ .id = chip##_ID_##regl_name,\
+ .name = __stringify(chip##_##regl_name),\
+ .of_match = of_match_ptr(#regl_name),\
+ .regulators_node = of_match_ptr("regulators"),\
+ .type = REGULATOR_VOLTAGE,\
+ .owner = THIS_MODULE,\
+ .ops = &pv88080_hvbuck_ops,\
+ .min_uV = min, \
+ .uV_step = step, \
+ .n_voltages = ((max) - (min))/(step) + 1, \
+ },\
}
static struct pv88080_regulator pv88080_regulator_info[] = {
@@ -220,6 +369,7 @@ static struct pv88080_regulator pv88080_regulator_info[] = {
pv88080_buck23_limits),
PV88080_BUCK(PV88080, BUCK3, 600000, 6250, 1393750,
pv88080_buck23_limits),
+ PV88080_HVBUCK(PV88080, HVBUCK, 0, 5000, 1275000),
};
static irqreturn_t pv88080_irq_handler(int irq, void *data)
@@ -280,6 +430,8 @@ static int pv88080_i2c_probe(struct i2c_client *i2c,
{
struct regulator_init_data *init_data = dev_get_platdata(&i2c->dev);
struct pv88080 *chip;
+ const struct pv88080_compatible_regmap *regmap_config;
+ const struct of_device_id *match;
struct regulator_config config = { };
int i, error, ret;
unsigned int conf2, conf5;
@@ -297,6 +449,17 @@ static int pv88080_i2c_probe(struct i2c_client *i2c,
return error;
}
+ if (i2c->dev.of_node) {
+ match = of_match_node(pv88080_dt_ids, i2c->dev.of_node);
+ if (!match) {
+ dev_err(chip->dev, "Failed to get of_match_node\n");
+ return -EINVAL;
+ }
+ chip->type = (unsigned long)match->data;
+ } else {
+ chip->type = id->driver_data;
+ }
+
i2c_set_clientdata(i2c, chip);
if (i2c->irq != 0) {
@@ -336,31 +499,58 @@ static int pv88080_i2c_probe(struct i2c_client *i2c,
"Failed to update mask reg: %d\n", ret);
return ret;
}
-
} else {
dev_warn(chip->dev, "No IRQ configured\n");
}
+ switch (chip->type) {
+ case TYPE_PV88080_AA:
+ chip->regmap_config = &pv88080_aa_regs;
+ break;
+ case TYPE_PV88080_BA:
+ chip->regmap_config = &pv88080_ba_regs;
+ break;
+ }
+
+ regmap_config = chip->regmap_config;
config.dev = chip->dev;
config.regmap = chip->regmap;
- for (i = 0; i < PV88080_MAX_REGULATORS; i++) {
+ /* Registeration for BUCK1, 2, 3 */
+ for (i = 0; i < PV88080_MAX_REGULATORS-1; i++) {
if (init_data)
config.init_data = &init_data[i];
+ pv88080_regulator_info[i].limit_reg
+ = regmap_config->buck_regmap[i].buck_limit_reg;
+ pv88080_regulator_info[i].limit_mask
+ = regmap_config->buck_regmap[i].buck_limit_mask;
+ pv88080_regulator_info[i].mode_reg
+ = regmap_config->buck_regmap[i].buck_mode_reg;
+ pv88080_regulator_info[i].conf2
+ = regmap_config->buck_regmap[i].buck_vdac_range_reg;
+ pv88080_regulator_info[i].conf5
+ = regmap_config->buck_regmap[i].buck_vrange_gain_reg;
+ pv88080_regulator_info[i].desc.enable_reg
+ = regmap_config->buck_regmap[i].buck_enable_reg;
+ pv88080_regulator_info[i].desc.enable_mask
+ = regmap_config->buck_regmap[i].buck_enable_mask;
+ pv88080_regulator_info[i].desc.vsel_reg
+ = regmap_config->buck_regmap[i].buck_vsel_reg;
+ pv88080_regulator_info[i].desc.vsel_mask
+ = regmap_config->buck_regmap[i].buck_vsel_mask;
+
ret = regmap_read(chip->regmap,
- pv88080_regulator_info[i].conf2, &conf2);
+ pv88080_regulator_info[i].conf2, &conf2);
if (ret < 0)
return ret;
-
conf2 = ((conf2 >> PV88080_BUCK_VDAC_RANGE_SHIFT) &
PV88080_BUCK_VDAC_RANGE_MASK);
ret = regmap_read(chip->regmap,
- pv88080_regulator_info[i].conf5, &conf5);
+ pv88080_regulator_info[i].conf5, &conf5);
if (ret < 0)
return ret;
-
conf5 = ((conf5 >> PV88080_BUCK_VRANGE_GAIN_SHIFT) &
PV88080_BUCK_VRANGE_GAIN_MASK);
@@ -383,23 +573,38 @@ static int pv88080_i2c_probe(struct i2c_client *i2c,
}
}
+ pv88080_regulator_info[PV88080_ID_HVBUCK].desc.enable_reg
+ = regmap_config->hvbuck_enable_reg;
+ pv88080_regulator_info[PV88080_ID_HVBUCK].desc.enable_mask
+ = regmap_config->hvbuck_enable_mask;
+ pv88080_regulator_info[PV88080_ID_HVBUCK].desc.vsel_reg
+ = regmap_config->hvbuck_vsel_reg;
+ pv88080_regulator_info[PV88080_ID_HVBUCK].desc.vsel_mask
+ = regmap_config->hvbuck_vsel_mask;
+
+ /* Registeration for HVBUCK */
+ if (init_data)
+ config.init_data = &init_data[PV88080_ID_HVBUCK];
+
+ config.driver_data = (void *)&pv88080_regulator_info[PV88080_ID_HVBUCK];
+ chip->rdev[PV88080_ID_HVBUCK] = devm_regulator_register(chip->dev,
+ &pv88080_regulator_info[PV88080_ID_HVBUCK].desc, &config);
+ if (IS_ERR(chip->rdev[PV88080_ID_HVBUCK])) {
+ dev_err(chip->dev, "Failed to register PV88080 regulator\n");
+ return PTR_ERR(chip->rdev[PV88080_ID_HVBUCK]);
+ }
+
return 0;
}
static const struct i2c_device_id pv88080_i2c_id[] = {
- {"pv88080", 0},
+ { "pv88080", TYPE_PV88080_AA },
+ { "pv88080-aa", TYPE_PV88080_AA },
+ { "pv88080-ba", TYPE_PV88080_BA },
{},
};
MODULE_DEVICE_TABLE(i2c, pv88080_i2c_id);
-#ifdef CONFIG_OF
-static const struct of_device_id pv88080_dt_ids[] = {
- { .compatible = "pvs,pv88080", .data = &pv88080_i2c_id[0] },
- {},
-};
-MODULE_DEVICE_TABLE(of, pv88080_dt_ids);
-#endif
-
static struct i2c_driver pv88080_regulator_driver = {
.driver = {
.name = "pv88080",
diff --git a/drivers/regulator/pv88080-regulator.h b/drivers/regulator/pv88080-regulator.h
index 5e9afde..ae25ff3 100644
--- a/drivers/regulator/pv88080-regulator.h
+++ b/drivers/regulator/pv88080-regulator.h
@@ -17,55 +17,75 @@
#define __PV88080_REGISTERS_H__
/* System Control and Event Registers */
-#define PV88080_REG_EVENT_A 0x04
-#define PV88080_REG_MASK_A 0x09
-#define PV88080_REG_MASK_B 0x0a
-#define PV88080_REG_MASK_C 0x0b
-
-/* Regulator Registers */
-#define PV88080_REG_BUCK1_CONF0 0x27
-#define PV88080_REG_BUCK1_CONF1 0x28
-#define PV88080_REG_BUCK1_CONF2 0x59
-#define PV88080_REG_BUCK1_CONF5 0x5c
-#define PV88080_REG_BUCK2_CONF0 0x29
-#define PV88080_REG_BUCK2_CONF1 0x2a
-#define PV88080_REG_BUCK2_CONF2 0x61
-#define PV88080_REG_BUCK2_CONF5 0x64
-#define PV88080_REG_BUCK3_CONF0 0x2b
-#define PV88080_REG_BUCK3_CONF1 0x2c
-#define PV88080_REG_BUCK3_CONF2 0x69
-#define PV88080_REG_BUCK3_CONF5 0x6c
+#define PV88080_REG_EVENT_A 0x04
+#define PV88080_REG_MASK_A 0x09
+#define PV88080_REG_MASK_B 0x0A
+#define PV88080_REG_MASK_C 0x0B
+
+/* Regulator Registers - rev. AA */
+#define PV88080AA_REG_HVBUCK_CONF1 0x2D
+#define PV88080AA_REG_HVBUCK_CONF2 0x2E
+#define PV88080AA_REG_BUCK1_CONF0 0x27
+#define PV88080AA_REG_BUCK1_CONF1 0x28
+#define PV88080AA_REG_BUCK1_CONF2 0x59
+#define PV88080AA_REG_BUCK1_CONF5 0x5C
+#define PV88080AA_REG_BUCK2_CONF0 0x29
+#define PV88080AA_REG_BUCK2_CONF1 0x2A
+#define PV88080AA_REG_BUCK2_CONF2 0x61
+#define PV88080AA_REG_BUCK2_CONF5 0x64
+#define PV88080AA_REG_BUCK3_CONF0 0x2B
+#define PV88080AA_REG_BUCK3_CONF1 0x2C
+#define PV88080AA_REG_BUCK3_CONF2 0x69
+#define PV88080AA_REG_BUCK3_CONF5 0x6C
+
+/* Regulator Registers - rev. BA */
+#define PV88080BA_REG_HVBUCK_CONF1 0x33
+#define PV88080BA_REG_HVBUCK_CONF2 0x34
+#define PV88080BA_REG_BUCK1_CONF0 0x2A
+#define PV88080BA_REG_BUCK1_CONF1 0x2C
+#define PV88080BA_REG_BUCK1_CONF2 0x5A
+#define PV88080BA_REG_BUCK1_CONF5 0x5D
+#define PV88080BA_REG_BUCK2_CONF0 0x2D
+#define PV88080BA_REG_BUCK2_CONF1 0x2F
+#define PV88080BA_REG_BUCK2_CONF2 0x63
+#define PV88080BA_REG_BUCK2_CONF5 0x66
+#define PV88080BA_REG_BUCK3_CONF0 0x30
+#define PV88080BA_REG_BUCK3_CONF1 0x32
+#define PV88080BA_REG_BUCK3_CONF2 0x6C
+#define PV88080BA_REG_BUCK3_CONF5 0x6F
/* PV88080_REG_EVENT_A (addr=0x04) */
#define PV88080_E_VDD_FLT 0x01
-#define PV88080_E_OVER_TEMP 0x02
+#define PV88080_E_OVER_TEMP 0x02
/* PV88080_REG_MASK_A (addr=0x09) */
#define PV88080_M_VDD_FLT 0x01
-#define PV88080_M_OVER_TEMP 0x02
+#define PV88080_M_OVER_TEMP 0x02
-/* PV88080_REG_BUCK1_CONF0 (addr=0x27) */
+/* PV88080_REG_BUCK1_CONF0 (addr=0x27|0x2A) */
#define PV88080_BUCK1_EN 0x80
-#define PV88080_VBUCK1_MASK 0x7F
-/* PV88080_REG_BUCK2_CONF0 (addr=0x29) */
+#define PV88080_VBUCK1_MASK 0x7F
+
+/* PV88080_REG_BUCK2_CONF0 (addr=0x29|0x2D) */
#define PV88080_BUCK2_EN 0x80
-#define PV88080_VBUCK2_MASK 0x7F
-/* PV88080_REG_BUCK3_CONF0 (addr=0x2b) */
+#define PV88080_VBUCK2_MASK 0x7F
+
+/* PV88080_REG_BUCK3_CONF0 (addr=0x2B|0x30) */
#define PV88080_BUCK3_EN 0x80
-#define PV88080_VBUCK3_MASK 0x7F
+#define PV88080_VBUCK3_MASK 0x7F
-/* PV88080_REG_BUCK1_CONF1 (addr=0x28) */
-#define PV88080_BUCK1_ILIM_SHIFT 2
+/* PV88080_REG_BUCK1_CONF1 (addr=0x28|0x2C) */
+#define PV88080_BUCK1_ILIM_SHIFT 2
#define PV88080_BUCK1_ILIM_MASK 0x0C
#define PV88080_BUCK1_MODE_MASK 0x03
-/* PV88080_REG_BUCK2_CONF1 (addr=0x2a) */
-#define PV88080_BUCK2_ILIM_SHIFT 2
+/* PV88080_REG_BUCK2_CONF1 (addr=0x2A|0x2F) */
+#define PV88080_BUCK2_ILIM_SHIFT 2
#define PV88080_BUCK2_ILIM_MASK 0x0C
#define PV88080_BUCK2_MODE_MASK 0x03
-/* PV88080_REG_BUCK3_CONF1 (addr=0x2c) */
-#define PV88080_BUCK3_ILIM_SHIFT 2
+/* PV88080_REG_BUCK3_CONF1 (addr=0x2C|0x32) */
+#define PV88080_BUCK3_ILIM_SHIFT 2
#define PV88080_BUCK3_ILIM_MASK 0x0C
#define PV88080_BUCK3_MODE_MASK 0x03
@@ -73,20 +93,26 @@
#define PV88080_BUCK_MODE_AUTO 0x01
#define PV88080_BUCK_MODE_SYNC 0x02
-/* PV88080_REG_BUCK2_CONF2 (addr=0x61) */
-/* PV88080_REG_BUCK3_CONF2 (addr=0x69) */
-#define PV88080_BUCK_VDAC_RANGE_SHIFT 7
-#define PV88080_BUCK_VDAC_RANGE_MASK 0x01
+/* PV88080_REG_HVBUCK_CONF1 (addr=0x2D|0x33) */
+#define PV88080_VHVBUCK_MASK 0xFF
+
+/* PV88080_REG_HVBUCK_CONF1 (addr=0x2E|0x34) */
+#define PV88080_HVBUCK_EN 0x01
+
+/* PV88080_REG_BUCK2_CONF2 (addr=0x61|0x63) */
+/* PV88080_REG_BUCK3_CONF2 (addr=0x69|0x6C) */
+#define PV88080_BUCK_VDAC_RANGE_SHIFT 7
+#define PV88080_BUCK_VDAC_RANGE_MASK 0x01
-#define PV88080_BUCK_VDAC_RANGE_1 0x00
-#define PV88080_BUCK_VDAC_RANGE_2 0x01
+#define PV88080_BUCK_VDAC_RANGE_1 0x00
+#define PV88080_BUCK_VDAC_RANGE_2 0x01
-/* PV88080_REG_BUCK2_CONF5 (addr=0x64) */
-/* PV88080_REG_BUCK3_CONF5 (addr=0x6c) */
-#define PV88080_BUCK_VRANGE_GAIN_SHIFT 0
-#define PV88080_BUCK_VRANGE_GAIN_MASK 0x01
+/* PV88080_REG_BUCK2_CONF5 (addr=0x64|0x66) */
+/* PV88080_REG_BUCK3_CONF5 (addr=0x6C|0x6F) */
+#define PV88080_BUCK_VRANGE_GAIN_SHIFT 0
+#define PV88080_BUCK_VRANGE_GAIN_MASK 0x01
-#define PV88080_BUCK_VRANGE_GAIN_1 0x00
-#define PV88080_BUCK_VRANGE_GAIN_2 0x01
+#define PV88080_BUCK_VRANGE_GAIN_1 0x00
+#define PV88080_BUCK_VRANGE_GAIN_2 0x01
#endif /* __PV88080_REGISTERS_H__ */
diff --git a/drivers/regulator/pwm-regulator.c b/drivers/regulator/pwm-regulator.c
index c245242..1b88e0e1 100644
--- a/drivers/regulator/pwm-regulator.c
+++ b/drivers/regulator/pwm-regulator.c
@@ -10,7 +10,6 @@
* published by the Free Software Foundation.
*/
-#include <linux/delay.h>
#include <linux/module.h>
#include <linux/init.h>
#include <linux/err.h>
@@ -194,12 +193,10 @@ static int pwm_regulator_set_voltage(struct regulator_dev *rdev,
unsigned int min_uV_duty = drvdata->continuous.min_uV_dutycycle;
unsigned int max_uV_duty = drvdata->continuous.max_uV_dutycycle;
unsigned int duty_unit = drvdata->continuous.dutycycle_unit;
- unsigned int ramp_delay = rdev->constraints->ramp_delay;
int min_uV = rdev->constraints->min_uV;
int max_uV = rdev->constraints->max_uV;
int diff_uV = max_uV - min_uV;
struct pwm_state pstate;
- int old_uV = pwm_regulator_get_voltage(rdev);
unsigned int diff_duty;
unsigned int dutycycle;
int ret;
@@ -233,13 +230,6 @@ static int pwm_regulator_set_voltage(struct regulator_dev *rdev,
return ret;
}
- if ((ramp_delay == 0) || !pwm_regulator_is_enabled(rdev))
- return 0;
-
- /* Ramp delay is in uV/uS. Adjust to uS and delay */
- ramp_delay = DIV_ROUND_UP(abs(req_min_uV - old_uV), ramp_delay);
- usleep_range(ramp_delay, ramp_delay + DIV_ROUND_UP(ramp_delay, 10));
-
return 0;
}
diff --git a/drivers/regulator/rk808-regulator.c b/drivers/regulator/rk808-regulator.c
index 40d07ba..a676749 100644
--- a/drivers/regulator/rk808-regulator.c
+++ b/drivers/regulator/rk808-regulator.c
@@ -533,8 +533,7 @@ static int rk808_regulator_probe(struct platform_device *pdev)
static struct platform_driver rk808_regulator_driver = {
.probe = rk808_regulator_probe,
.driver = {
- .name = "rk808-regulator",
- .owner = THIS_MODULE,
+ .name = "rk808-regulator"
},
};
diff --git a/drivers/regulator/tps65218-regulator.c b/drivers/regulator/tps65218-regulator.c
index d1e631d..eb0f5b1 100644
--- a/drivers/regulator/tps65218-regulator.c
+++ b/drivers/regulator/tps65218-regulator.c
@@ -180,6 +180,14 @@ static int tps65218_pmic_set_suspend_disable(struct regulator_dev *dev)
if (rid < TPS65218_DCDC_1 || rid > TPS65218_LDO_1)
return -EINVAL;
+ /*
+ * Certain revisions of TPS65218 will need to have DCDC3 regulator
+ * enabled always, otherwise an immediate system reboot will occur
+ * during poweroff.
+ */
+ if (rid == TPS65218_DCDC_3 && tps->rev == TPS65218_REV_2_1)
+ return 0;
+
if (!tps->info[rid]->strobe) {
if (rid == TPS65218_DCDC_3)
tps->info[rid]->strobe = 3;
diff --git a/drivers/regulator/tps65910-regulator.c b/drivers/regulator/tps65910-regulator.c
index fb991ec..696116e 100644
--- a/drivers/regulator/tps65910-regulator.c
+++ b/drivers/regulator/tps65910-regulator.c
@@ -1111,6 +1111,12 @@ static int tps65910_probe(struct platform_device *pdev)
pmic->num_regulators = ARRAY_SIZE(tps65910_regs);
pmic->ext_sleep_control = tps65910_ext_sleep_control;
info = tps65910_regs;
+ /* Work around silicon erratum SWCZ010: output programmed
+ * voltage level can go higher than expected or crash
+ * Workaround: use no synchronization of DCDC clocks
+ */
+ tps65910_reg_clear_bits(pmic->mfd, TPS65910_DCDCCTRL,
+ DCDCCTRL_DCDCCKSYNC_MASK);
break;
case TPS65911:
pmic->get_ctrl_reg = &tps65911_get_ctrl_register;
diff --git a/include/linux/mfd/tps65218.h b/include/linux/mfd/tps65218.h
index 7fdf532..d1db952 100644
--- a/include/linux/mfd/tps65218.h
+++ b/include/linux/mfd/tps65218.h
@@ -63,6 +63,11 @@
#define TPS65218_CHIPID_CHIP_MASK 0xF8
#define TPS65218_CHIPID_REV_MASK 0x07
+#define TPS65218_REV_1_0 0x0
+#define TPS65218_REV_1_1 0x1
+#define TPS65218_REV_2_0 0x2
+#define TPS65218_REV_2_1 0x3
+
#define TPS65218_INT1_VPRG BIT(5)
#define TPS65218_INT1_AC BIT(4)
#define TPS65218_INT1_PB BIT(3)
@@ -267,6 +272,7 @@ struct tps_info {
struct tps65218 {
struct device *dev;
unsigned int id;
+ u8 rev;
struct mutex tps_lock; /* lock guarding the data structure */
/* IRQ Data */
diff --git a/include/linux/regulator/consumer.h b/include/linux/regulator/consumer.h
index cae500b..6921082 100644
--- a/include/linux/regulator/consumer.h
+++ b/include/linux/regulator/consumer.h
@@ -140,8 +140,6 @@ struct regulator;
*
* @supply: The name of the supply. Initialised by the user before
* using the bulk regulator APIs.
- * @optional: The supply should be considered optional. Initialised by the user
- * before using the bulk regulator APIs.
* @consumer: The regulator consumer for the supply. This will be managed
* by the bulk API.
*
@@ -151,7 +149,6 @@ struct regulator;
*/
struct regulator_bulk_data {
const char *supply;
- bool optional;
struct regulator *consumer;
/* private: Internal use */
diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h
index fcfa40a..37b5324 100644
--- a/include/linux/regulator/driver.h
+++ b/include/linux/regulator/driver.h
@@ -113,10 +113,14 @@ struct regulator_linear_range {
* stabilise after being enabled, in microseconds.
* @set_ramp_delay: Set the ramp delay for the regulator. The driver should
* select ramp delay equal to or less than(closest) ramp_delay.
+ * @set_voltage_time: Time taken for the regulator voltage output voltage
+ * to stabilise after being set to a new value, in microseconds.
+ * The function receives the from and to voltage as input, it
+ * should return the worst case.
* @set_voltage_time_sel: Time taken for the regulator voltage output voltage
* to stabilise after being set to a new value, in microseconds.
- * The function provides the from and to voltage selector, the
- * function should return the worst case.
+ * The function receives the from and to voltage selector as
+ * input, it should return the worst case.
* @set_soft_start: Enable soft start for the regulator.
*
* @set_suspend_voltage: Set the voltage for the regulator when the system
@@ -168,6 +172,8 @@ struct regulator_ops {
/* Time taken to enable or set voltage on the regulator */
int (*enable_time) (struct regulator_dev *);
int (*set_ramp_delay) (struct regulator_dev *, int ramp_delay);
+ int (*set_voltage_time) (struct regulator_dev *, int old_uV,
+ int new_uV);
int (*set_voltage_time_sel) (struct regulator_dev *,
unsigned int old_selector,
unsigned int new_selector);
generated by cgit v0.10.2 at 2024-11-02 14:42:04 (GMT)