diff options
| -rw-r--r-- | Documentation/devicetree/bindings/usb/omap-usb.txt | 5 | ||||
| -rw-r--r-- | drivers/usb/dwc3/Kconfig | 1 | ||||
| -rw-r--r-- | drivers/usb/dwc3/dwc3-omap.c | 125 | ||||
| -rw-r--r-- | include/linux/usb/dwc3-omap.h | 30 |
4 files changed, 112 insertions, 49 deletions
diff --git a/Documentation/devicetree/bindings/usb/omap-usb.txt b/Documentation/devicetree/bindings/usb/omap-usb.txt index 57e71f6..9088ab0 100644 --- a/Documentation/devicetree/bindings/usb/omap-usb.txt +++ b/Documentation/devicetree/bindings/usb/omap-usb.txt @@ -53,6 +53,11 @@ OMAP DWC3 GLUE It should be set to "1" for HW mode and "2" for SW mode. - ranges: the child address space are mapped 1:1 onto the parent address space +Optional Properties: + - extcon : phandle for the extcon device omap dwc3 uses to detect + connect/disconnect events. + - vbus-supply : phandle to the regulator device tree node if needed. + Sub-nodes: The dwc3 core should be added as subnode to omap dwc3 glue. - dwc3 : diff --git a/drivers/usb/dwc3/Kconfig b/drivers/usb/dwc3/Kconfig index 2378958..4c855e5 100644 --- a/drivers/usb/dwc3/Kconfig +++ b/drivers/usb/dwc3/Kconfig @@ -1,6 +1,7 @@ config USB_DWC3 tristate "DesignWare USB3 DRD Core Support" depends on (USB || USB_GADGET) && GENERIC_HARDIRQS && HAS_DMA + depends on EXTCON select USB_XHCI_PLATFORM if USB_SUPPORT && USB_XHCI_HCD help Say Y or M here if your system has a Dual Role SuperSpeed diff --git a/drivers/usb/dwc3/dwc3-omap.c b/drivers/usb/dwc3/dwc3-omap.c index 077f110b..b26c2a4 100644 --- a/drivers/usb/dwc3/dwc3-omap.c +++ b/drivers/usb/dwc3/dwc3-omap.c @@ -43,13 +43,15 @@ #include <linux/spinlock.h> #include <linux/platform_device.h> #include <linux/platform_data/dwc3-omap.h> -#include <linux/usb/dwc3-omap.h> #include <linux/pm_runtime.h> #include <linux/dma-mapping.h> #include <linux/ioport.h> #include <linux/io.h> #include <linux/of.h> #include <linux/of_platform.h> +#include <linux/extcon.h> +#include <linux/extcon/of_extcon.h> +#include <linux/regulator/consumer.h> #include <linux/usb/otg.h> @@ -155,9 +157,21 @@ struct dwc3_omap { u32 revision; u32 dma_status:1; + + struct extcon_specific_cable_nb extcon_vbus_dev; + struct extcon_specific_cable_nb extcon_id_dev; + struct notifier_block vbus_nb; + struct notifier_block id_nb; + + struct regulator *vbus_reg; }; -static struct dwc3_omap *_omap; +enum omap_dwc3_vbus_id_status { + OMAP_DWC3_ID_FLOAT, + OMAP_DWC3_ID_GROUND, + OMAP_DWC3_VBUS_OFF, + OMAP_DWC3_VBUS_VALID, +}; static inline u32 dwc3_omap_readl(void __iomem *base, u32 offset) { @@ -221,18 +235,24 @@ static void dwc3_omap_write_irq0_set(struct dwc3_omap *omap, u32 value) omap->irq0_offset, value); } -int dwc3_omap_mailbox(enum omap_dwc3_vbus_id_status status) +static void dwc3_omap_set_mailbox(struct dwc3_omap *omap, + enum omap_dwc3_vbus_id_status status) { - u32 val; - struct dwc3_omap *omap = _omap; - - if (!omap) - return -EPROBE_DEFER; + int ret; + u32 val; switch (status) { case OMAP_DWC3_ID_GROUND: dev_dbg(omap->dev, "ID GND\n"); + if (omap->vbus_reg) { + ret = regulator_enable(omap->vbus_reg); + if (ret) { + dev_dbg(omap->dev, "regulator enable failed\n"); + return; + } + } + val = dwc3_omap_read_utmi_status(omap); val &= ~(USBOTGSS_UTMI_OTG_STATUS_IDDIG | USBOTGSS_UTMI_OTG_STATUS_VBUSVALID @@ -255,6 +275,9 @@ int dwc3_omap_mailbox(enum omap_dwc3_vbus_id_status status) break; case OMAP_DWC3_ID_FLOAT: + if (omap->vbus_reg) + regulator_disable(omap->vbus_reg); + case OMAP_DWC3_VBUS_OFF: dev_dbg(omap->dev, "VBUS Disconnect\n"); @@ -268,12 +291,9 @@ int dwc3_omap_mailbox(enum omap_dwc3_vbus_id_status status) break; default: - dev_dbg(omap->dev, "ID float\n"); + dev_dbg(omap->dev, "invalid state\n"); } - - return 0; } -EXPORT_SYMBOL_GPL(dwc3_omap_mailbox); static irqreturn_t dwc3_omap_interrupt(int irq, void *_omap) { @@ -366,6 +386,32 @@ static void dwc3_omap_disable_irqs(struct dwc3_omap *omap) static u64 dwc3_omap_dma_mask = DMA_BIT_MASK(32); +static int dwc3_omap_id_notifier(struct notifier_block *nb, + unsigned long event, void *ptr) +{ + struct dwc3_omap *omap = container_of(nb, struct dwc3_omap, id_nb); + + if (event) + dwc3_omap_set_mailbox(omap, OMAP_DWC3_ID_GROUND); + else + dwc3_omap_set_mailbox(omap, OMAP_DWC3_ID_FLOAT); + + return NOTIFY_DONE; +} + +static int dwc3_omap_vbus_notifier(struct notifier_block *nb, + unsigned long event, void *ptr) +{ + struct dwc3_omap *omap = container_of(nb, struct dwc3_omap, vbus_nb); + + if (event) + dwc3_omap_set_mailbox(omap, OMAP_DWC3_VBUS_VALID); + else + dwc3_omap_set_mailbox(omap, OMAP_DWC3_VBUS_OFF); + + return NOTIFY_DONE; +} + static int dwc3_omap_probe(struct platform_device *pdev) { struct device_node *node = pdev->dev.of_node; @@ -373,6 +419,8 @@ static int dwc3_omap_probe(struct platform_device *pdev) struct dwc3_omap *omap; struct resource *res; struct device *dev = &pdev->dev; + struct extcon_dev *edev; + struct regulator *vbus_reg = NULL; int ret = -ENOMEM; int irq; @@ -415,19 +463,22 @@ static int dwc3_omap_probe(struct platform_device *pdev) return -ENOMEM; } + if (of_property_read_bool(node, "vbus-supply")) { + vbus_reg = devm_regulator_get(dev, "vbus"); + if (IS_ERR(vbus_reg)) { + dev_err(dev, "vbus init failed\n"); + return PTR_ERR(vbus_reg); + } + } + spin_lock_init(&omap->lock); omap->dev = dev; omap->irq = irq; omap->base = base; + omap->vbus_reg = vbus_reg; dev->dma_mask = &dwc3_omap_dma_mask; - /* - * REVISIT if we ever have two instances of the wrapper, we will be - * in big trouble - */ - _omap = omap; - pm_runtime_enable(dev); ret = pm_runtime_get_sync(dev); if (ret < 0) { @@ -502,14 +553,46 @@ static int dwc3_omap_probe(struct platform_device *pdev) dwc3_omap_enable_irqs(omap); + if (of_property_read_bool(node, "extcon")) { + edev = of_extcon_get_extcon_dev(dev, 0); + if (IS_ERR(edev)) { + dev_vdbg(dev, "couldn't get extcon device\n"); + ret = PTR_ERR(edev); + goto err2; + } + + omap->vbus_nb.notifier_call = dwc3_omap_vbus_notifier; + ret = extcon_register_interest(&omap->extcon_vbus_dev, + edev->name, "USB", &omap->vbus_nb); + if (ret < 0) + dev_vdbg(dev, "failed to register notifier for USB\n"); + omap->id_nb.notifier_call = dwc3_omap_id_notifier; + ret = extcon_register_interest(&omap->extcon_id_dev, edev->name, + "USB-HOST", &omap->id_nb); + if (ret < 0) + dev_vdbg(dev, + "failed to register notifier for USB-HOST\n"); + + if (extcon_get_cable_state(edev, "USB") == true) + dwc3_omap_set_mailbox(omap, OMAP_DWC3_VBUS_VALID); + if (extcon_get_cable_state(edev, "USB-HOST") == true) + dwc3_omap_set_mailbox(omap, OMAP_DWC3_ID_GROUND); + } + ret = of_platform_populate(node, NULL, NULL, dev); if (ret) { dev_err(&pdev->dev, "failed to create dwc3 core\n"); - goto err2; + goto err3; } return 0; +err3: + if (omap->extcon_vbus_dev.edev) + extcon_unregister_interest(&omap->extcon_vbus_dev); + if (omap->extcon_id_dev.edev) + extcon_unregister_interest(&omap->extcon_id_dev); + err2: dwc3_omap_disable_irqs(omap); @@ -526,6 +609,10 @@ static int dwc3_omap_remove(struct platform_device *pdev) { struct dwc3_omap *omap = platform_get_drvdata(pdev); + if (omap->extcon_vbus_dev.edev) + extcon_unregister_interest(&omap->extcon_vbus_dev); + if (omap->extcon_id_dev.edev) + extcon_unregister_interest(&omap->extcon_id_dev); dwc3_omap_disable_irqs(omap); pm_runtime_put_sync(&pdev->dev); pm_runtime_disable(&pdev->dev); diff --git a/include/linux/usb/dwc3-omap.h b/include/linux/usb/dwc3-omap.h deleted file mode 100644 index 5615f4d..0000000 --- a/include/linux/usb/dwc3-omap.h +++ /dev/null @@ -1,30 +0,0 @@ -/* - * Copyright (C) 2013 by Texas Instruments - * - * The Inventra Controller Driver for Linux is free software; you - * can redistribute it and/or modify it under the terms of the GNU - * General Public License version 2 as published by the Free Software - * Foundation. - */ - -#ifndef __DWC3_OMAP_H__ -#define __DWC3_OMAP_H__ - -enum omap_dwc3_vbus_id_status { - OMAP_DWC3_UNKNOWN = 0, - OMAP_DWC3_ID_GROUND, - OMAP_DWC3_ID_FLOAT, - OMAP_DWC3_VBUS_VALID, - OMAP_DWC3_VBUS_OFF, -}; - -#if (defined(CONFIG_USB_DWC3) || defined(CONFIG_USB_DWC3_MODULE)) -extern int dwc3_omap_mailbox(enum omap_dwc3_vbus_id_status status); -#else -static inline int dwc3_omap_mailbox(enum omap_dwc3_vbus_id_status status) -{ - return -ENODEV; -} -#endif - -#endif /* __DWC3_OMAP_H__ */ |