diff options
-rw-r--r-- | Documentation/devicetree/bindings/vendor-prefixes.txt | 1 | ||||
-rw-r--r-- | arch/arm/boot/dts/Makefile | 3 | ||||
-rw-r--r-- | arch/arm/boot/dts/dove-cubox-es.dts | 12 | ||||
-rw-r--r-- | arch/arm/boot/dts/dove-cubox.dts | 3 | ||||
-rw-r--r-- | arch/arm/boot/dts/kirkwood-net2big.dts | 30 | ||||
-rw-r--r-- | arch/arm/boot/dts/kirkwood-net5big.dts | 83 | ||||
-rw-r--r-- | arch/arm/boot/dts/kirkwood-netxbig.dtsi | 180 |
7 files changed, 309 insertions, 3 deletions
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt index 46a311e..4c4883e 100644 --- a/Documentation/devicetree/bindings/vendor-prefixes.txt +++ b/Documentation/devicetree/bindings/vendor-prefixes.txt @@ -122,6 +122,7 @@ sii Seiko Instruments, Inc. sirf SiRF Technology, Inc. smsc Standard Microsystems Corporation snps Synopsys, Inc. +solidrun SolidRun spansion Spansion Inc. st STMicroelectronics ste ST-Ericsson diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 81bd72a..41c73a1 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -125,6 +125,8 @@ kirkwood := \ kirkwood-lsxhl.dtb \ kirkwood-mplcec4.dtb \ kirkwood-mv88f6281gtw-ge.dtb \ + kirkwood-net2big.dtb \ + kirkwood-net5big.dtb \ kirkwood-netgear_readynas_duo_v2.dtb \ kirkwood-netgear_readynas_nv+_v2.dtb \ kirkwood-ns2.dtb \ @@ -471,6 +473,7 @@ dtb-$(CONFIG_MACH_ARMADA_XP) += \ armada-xp-openblocks-ax3-4.dtb dtb-$(CONFIG_MACH_DOVE) += dove-cm-a510.dtb \ dove-cubox.dtb \ + dove-cubox-es.dtb \ dove-d2plug.dtb \ dove-d3plug.dtb \ dove-dove-db.dtb diff --git a/arch/arm/boot/dts/dove-cubox-es.dts b/arch/arm/boot/dts/dove-cubox-es.dts new file mode 100644 index 0000000..e28ef05 --- /dev/null +++ b/arch/arm/boot/dts/dove-cubox-es.dts @@ -0,0 +1,12 @@ +#include "dove-cubox.dts" + +/ { + model = "SolidRun CuBox (Engineering Sample)"; + compatible = "solidrun,cubox-es", "solidrun,cubox", "marvell,dove"; +}; + +&sdio0 { + /* sdio0 card detect is connected to wrong pin on CuBox ES */ + cd-gpios = <&gpio0 12 1>; + pinctrl-0 = <&pmx_sdio0 &pmx_gpio_12>; +}; diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/dove-cubox.dts index 7a70f4ca..aae7efc 100644 --- a/arch/arm/boot/dts/dove-cubox.dts +++ b/arch/arm/boot/dts/dove-cubox.dts @@ -111,9 +111,6 @@ &sdio0 { status = "okay"; - /* sdio0 card detect is connected to wrong pin on CuBox */ - cd-gpios = <&gpio0 12 1>; - pinctrl-0 = <&pmx_sdio0 &pmx_gpio_12>; }; &spi0 { diff --git a/arch/arm/boot/dts/kirkwood-net2big.dts b/arch/arm/boot/dts/kirkwood-net2big.dts new file mode 100644 index 0000000..a98decc --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-net2big.dts @@ -0,0 +1,30 @@ +/* + * Device Tree file for LaCie 2Big Network v2 + * + * Copyright (C) 2014 + * + * Andrew Lunn <andrew@lunn.ch> + * + * Based on netxbig_v2-setup.c, + * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. +*/ + +/dts-v1/; + +#include "kirkwood.dtsi" +#include "kirkwood-6281.dtsi" +#include "kirkwood-netxbig.dtsi" + +/ { + model = "LaCie 2Big Network v2"; + compatible = "lacie,net2big_v2", "lacie,netxbig", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-net5big.dts b/arch/arm/boot/dts/kirkwood-net5big.dts new file mode 100644 index 0000000..d2887ed --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-net5big.dts @@ -0,0 +1,83 @@ +/* + * Device Tree file for LaCie 5Big Network v2 + * + * Copyright (C) 2014 + * + * Andrew Lunn <andrew@lunn.ch> + * + * Based on netxbig_v2-setup.c, + * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. +*/ + +/dts-v1/; + +#include "kirkwood.dtsi" +#include "kirkwood-6281.dtsi" +#include "kirkwood-netxbig.dtsi" + +/ { + model = "LaCie 5Big Network v2"; + compatible = "lacie,net5big_v2", "lacie,netxbig", "marvell,kirkwood-88f6281", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; + }; + +}; + +®ulators { + regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "hdd2power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio1 9 GPIO_ACTIVE_HIGH>; + }; + + regulator@4 { + compatible = "regulator-fixed"; + reg = <4>; + regulator-name = "hdd3power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio1 10 GPIO_ACTIVE_HIGH>; + }; + + regulator@5 { + compatible = "regulator-fixed"; + reg = <5>; + regulator-name = "hdd4power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio1 11 GPIO_ACTIVE_HIGH>; + }; +}; + +&mdio { + ethphy1: ethernet-phy@1 { + reg = <0>; + }; +}; + +ð1 { + status = "okay"; + ethernet1-port@0 { + phy-handle = <ðphy1>; + }; +}; + diff --git a/arch/arm/boot/dts/kirkwood-netxbig.dtsi b/arch/arm/boot/dts/kirkwood-netxbig.dtsi new file mode 100644 index 0000000..fd75720 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-netxbig.dtsi @@ -0,0 +1,180 @@ +/* + * Device Tree common file for LaCie 2Big and 5Big Network v2 + * + * Copyright (C) 2014 + * + * Andrew Lunn <andrew@lunn.ch> + * + * Based on netxbig_v2-setup.c, + * Copyright (C) 2010 Simon Guinot <sguinot@lacie.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. +*/ + +#include "kirkwood.dtsi" +#include "kirkwood-6281.dtsi" + +/ { + chosen { + bootargs = "console=ttyS0,115200n8"; + stdout-path = &uart0; + }; + + ocp@f1000000 { + serial@12000 { + status = "okay"; + }; + + spi@10600 { + status = "okay"; + + flash@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "mxicy,mx25l4005a"; + reg = <0>; + spi-max-frequency = <20000000>; + mode = <0>; + + partition@0 { + reg = <0x0 0x80000>; + label = "u-boot"; + }; + }; + }; + + sata@80000 { + status = "okay"; + nr-ports = <2>; + }; + + }; + + gpio-keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + /* + * button@1 and button@2 represent a three position rocker + * switch. Thus the conventional KEY_POWER does not fit + */ + button@1 { + label = "Back power switch (on|auto)"; + linux,code = <KEY_ESC>; + linux,input-type = <5>; + gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; + }; + button@2 { + label = "Back power switch (auto|off)"; + linux,code = <KEY_1>; + linux,input-type = <5>; + gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; + }; + button@3 { + label = "Function button"; + linux,code = <KEY_OPTION>; + gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; + }; + + }; + + gpio-poweroff { + compatible = "gpio-poweroff"; + gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>; + }; + + regulators: regulators { + status = "okay"; + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + + regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "hdd0power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 16 GPIO_ACTIVE_HIGH>; + }; + + regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "hdd1power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 17 GPIO_ACTIVE_HIGH>; + }; + + clocks { + g762_clk: g762-oscillator { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; + }; +}; + +&mdio { + status = "okay"; + + ethphy0: ethernet-phy@0 { + reg = <8>; + }; + + ethphy1: ethernet-phy@1 { + reg = <0>; + }; +}; + +ð0 { + status = "okay"; + ethernet0-port@0 { + phy-handle = <ðphy0>; + }; +}; + +&pinctrl { + pinctrl-names = "default"; + + pmx_button_function: pmx-button-function { + marvell,pins = "mpp34"; + marvell,function = "gpio"; + }; + pmx_button_power_off: pmx-button-power-off { + marvell,pins = "mpp15"; + marvell,function = "gpio"; + }; + pmx_button_power_on: pmx-button-power-on { + marvell,pins = "mpp13"; + marvell,function = "gpio"; + }; +}; + +&i2c0 { + status = "okay"; + + eeprom@50 { + compatible = "atmel,24c04"; + pagesize = <16>; + reg = <0x50>; + }; + + g762@3e { + compatible = "gmt,g762"; + reg = <0x3e>; + clocks = <&g762_clk>; + }; +}; |