diff options
30 files changed, 2325 insertions, 2758 deletions
diff --git a/drivers/scsi/isci/Makefile b/drivers/scsi/isci/Makefile index 522e7a7..ccc8c53 100644 --- a/drivers/scsi/isci/Makefile +++ b/drivers/scsi/isci/Makefile @@ -10,20 +10,19 @@ obj-$(CONFIG_SCSI_ISCI) += isci.o isci-objs := init.o phy.o request.o sata.o \ remote_device.o port.o timers.o \ host.o task.o probe_roms.o \ + stp_remote_device.o \ + smp_remote_device.o \ + remote_node_context.o \ + remote_node_table.o \ core/scic_sds_controller.o \ - core/scic_sds_remote_device.o \ core/scic_sds_request.o \ core/scic_sds_stp_request.o \ core/scic_sds_stp_packet_request.o \ - core/scic_sds_stp_remote_device.o \ core/scic_sds_port.o \ core/scic_sds_port_configuration_agent.o \ core/scic_sds_phy.o \ core/scic_sds_ssp_request.o \ - core/scic_sds_remote_node_context.o \ core/scic_sds_smp_request.o \ - core/scic_sds_smp_remote_device.o \ - core/scic_sds_remote_node_table.o \ core/scic_sds_unsolicited_frame_control.o \ core/sci_base_state_machine.o \ core/sci_util.o diff --git a/drivers/scsi/isci/core/scic_remote_device.h b/drivers/scsi/isci/core/scic_remote_device.h deleted file mode 100644 index 23e90af..0000000 --- a/drivers/scsi/isci/core/scic_remote_device.h +++ /dev/null @@ -1,282 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#ifndef _SCIC_REMOTE_DEVICE_H_ -#define _SCIC_REMOTE_DEVICE_H_ - -/** - * This file contains all of the interface methods that can be called by an - * SCIC user on the device object. - * - * - */ - - -#include "sci_status.h" -#include "intel_sas.h" - -struct scic_sds_port; -struct scic_sds_remote_device; - -/** - * - * - * - */ -enum scic_remote_device_not_ready_reason_code { - SCIC_REMOTE_DEVICE_NOT_READY_START_REQUESTED, - SCIC_REMOTE_DEVICE_NOT_READY_STOP_REQUESTED, - SCIC_REMOTE_DEVICE_NOT_READY_SATA_REQUEST_STARTED, - SCIC_REMOTE_DEVICE_NOT_READY_SATA_SDB_ERROR_FIS_RECEIVED, - SCIC_REMOTE_DEVICE_NOT_READY_SMP_REQUEST_STARTED, - - SCIC_REMOTE_DEVICE_NOT_READY_REASON_CODE_MAX - -}; - -/** - * scic_remote_device_construct() - This method will perform the construction - * common to all remote device objects. - * @sci_port: SAS/SATA port through which this device is accessed. - * @sci_dev: remote device to construct - * - * It isn't necessary to call scic_remote_device_destruct() for device objects - * that have only called this method for construction. Once subsequent - * construction methods have been invoked (e.g. - * scic_remote_device_da_construct()), then destruction should occur. none - */ -void scic_remote_device_construct(struct scic_sds_port *sci_port, - struct scic_sds_remote_device *sci_dev); - -/** - * scic_remote_device_da_construct() - This method will construct a - * SCIC_REMOTE_DEVICE object for a direct attached (da) device. The - * information (e.g. IAF, Signature FIS, etc.) necessary to build the device - * is known to the SCI Core since it is contained in the scic_phy object. - * @remote_device: This parameter specifies the remote device to be destructed. - * - * The user must have previously called scic_remote_device_construct() Remote - * device objects are a limited resource. As such, they must be protected. - * Thus calls to construct and destruct are mutually exclusive and - * non-reentrant. Indicate if the remote device was successfully constructed. - * SCI_SUCCESS Returned if the device was successfully constructed. - * SCI_FAILURE_DEVICE_EXISTS Returned if the device has already been - * constructed. If it's an additional phy for the target, then call - * scic_remote_device_da_add_phy(). SCI_FAILURE_UNSUPPORTED_PROTOCOL Returned - * if the supplied parameters necessitate creation of a remote device for which - * the protocol is not supported by the underlying controller hardware. - * SCI_FAILURE_INSUFFICIENT_RESOURCES This value is returned if the core - * controller associated with the supplied parameters is unable to support - * additional remote devices. - */ -enum sci_status scic_remote_device_da_construct( - struct scic_sds_remote_device *remote_device); - -/** - * scic_remote_device_ea_construct() - This method will construct an - * SCIC_REMOTE_DEVICE object for an expander attached (ea) device from an - * SMP Discover Response. - * @remote_device: This parameter specifies the remote device to be destructed. - * @discover_response: This parameter specifies the SMP Discovery Response to - * be used in device creation. - * - * The user must have previously called scic_remote_device_construct() Remote - * device objects are a limited resource. As such, they must be protected. - * Thus calls to construct and destruct are mutually exclusive and - * non-reentrant. Indicate if the remote device was successfully constructed. - * SCI_SUCCESS Returned if the device was successfully constructed. - * SCI_FAILURE_DEVICE_EXISTS Returned if the device has already been - * constructed. If it's an additional phy for the target, then call - * scic_ea_remote_device_add_phy(). SCI_FAILURE_UNSUPPORTED_PROTOCOL Returned - * if the supplied parameters necessitate creation of a remote device for which - * the protocol is not supported by the underlying controller hardware. - * SCI_FAILURE_INSUFFICIENT_RESOURCES This value is returned if the core - * controller associated with the supplied parameters is unable to support - * additional remote devices. - */ -enum sci_status scic_remote_device_ea_construct( - struct scic_sds_remote_device *remote_device, - struct smp_response_discover *discover_response); - -/** - * scic_remote_device_destruct() - This method is utilized to free up a core's - * remote device object. - * @remote_device: This parameter specifies the remote device to be destructed. - * - * Remote device objects are a limited resource. As such, they must be - * protected. Thus calls to construct and destruct are mutually exclusive and - * non-reentrant. The return value shall indicate if the device was - * successfully destructed or if some failure occurred. enum sci_status This value - * is returned if the device is successfully destructed. - * SCI_FAILURE_INVALID_REMOTE_DEVICE This value is returned if the supplied - * device isn't valid (e.g. it's already been destoryed, the handle isn't - * valid, etc.). - */ -enum sci_status scic_remote_device_destruct( - struct scic_sds_remote_device *remote_device); - - - - - -/** - * scic_remote_device_start() - This method will start the supplied remote - * device. This method enables normal IO requests to flow through to the - * remote device. - * @remote_device: This parameter specifies the device to be started. - * @timeout: This parameter specifies the number of milliseconds in which the - * start operation should complete. - * - * An indication of whether the device was successfully started. SCI_SUCCESS - * This value is returned if the device was successfully started. - * SCI_FAILURE_INVALID_PHY This value is returned if the user attempts to start - * the device when there have been no phys added to it. - */ -enum sci_status scic_remote_device_start( - struct scic_sds_remote_device *remote_device, - u32 timeout); - -/** - * scic_remote_device_stop() - This method will stop both transmission and - * reception of link activity for the supplied remote device. This method - * disables normal IO requests from flowing through to the remote device. - * @remote_device: This parameter specifies the device to be stopped. - * @timeout: This parameter specifies the number of milliseconds in which the - * stop operation should complete. - * - * An indication of whether the device was successfully stopped. SCI_SUCCESS - * This value is returned if the transmission and reception for the device was - * successfully stopped. - */ -enum sci_status scic_remote_device_stop( - struct scic_sds_remote_device *remote_device, - u32 timeout); - -/** - * scic_remote_device_reset() - This method will reset the device making it - * ready for operation. This method must be called anytime the device is - * reset either through a SMP phy control or a port hard reset request. - * @remote_device: This parameter specifies the device to be reset. - * - * This method does not actually cause the device hardware to be reset. This - * method resets the software object so that it will be operational after a - * device hardware reset completes. An indication of whether the device reset - * was accepted. SCI_SUCCESS This value is returned if the device reset is - * started. - */ -enum sci_status scic_remote_device_reset( - struct scic_sds_remote_device *remote_device); - -/** - * scic_remote_device_reset_complete() - This method informs the device object - * that the reset operation is complete and the device can resume operation - * again. - * @remote_device: This parameter specifies the device which is to be informed - * of the reset complete operation. - * - * An indication that the device is resuming operation. SCI_SUCCESS the device - * is resuming operation. - */ -enum sci_status scic_remote_device_reset_complete( - struct scic_sds_remote_device *remote_device); - - - -/** - * scic_remote_device_get_connection_rate() - This method simply returns the - * link rate at which communications to the remote device occur. - * @remote_device: This parameter specifies the device for which to get the - * connection rate. - * - * Return the link rate at which we transfer for the supplied remote device. - */ -enum sas_linkrate scic_remote_device_get_connection_rate( - struct scic_sds_remote_device *remote_device); - -/** - * scic_remote_device_get_protocols() - This method will indicate which - * protocols are supported by this remote device. - * @remote_device: This parameter specifies the device for which to return the - * protocol. - * @protocols: This parameter specifies the output values, from the remote - * device object, which indicate the protocols supported by the supplied - * remote_device. - * - * The type of protocols supported by this device. The values are returned as - * part of a bit mask in order to allow for multi-protocol support. - */ -void scic_remote_device_get_protocols( - struct scic_sds_remote_device *remote_device, - struct smp_discover_response_protocols *protocols); - - -#if !defined(DISABLE_ATAPI) -/** - * scic_remote_device_is_atapi() - - * @this_device: The device whose type is to be decided. - * - * This method first decide whether a device is a stp target, then decode the - * signature fis of a DA STP device to tell whether it is a standard end disk - * or an ATAPI device. bool Indicate a device is ATAPI device or not. - */ -bool scic_remote_device_is_atapi( - struct scic_sds_remote_device *device_handle); -#else /* !defined(DISABLE_ATAPI) */ -#define scic_remote_device_is_atapi(device_handle) false -#endif /* !defined(DISABLE_ATAPI) */ - - -#endif /* _SCIC_REMOTE_DEVICE_H_ */ - diff --git a/drivers/scsi/isci/core/scic_sds_controller.c b/drivers/scsi/isci/core/scic_sds_controller.c index 63f4cd1..c684d9e 100644 --- a/drivers/scsi/isci/core/scic_sds_controller.c +++ b/drivers/scsi/isci/core/scic_sds_controller.c @@ -57,13 +57,12 @@ #include "scic_controller.h" #include "scic_phy.h" #include "scic_port.h" -#include "scic_remote_device.h" #include "scic_sds_controller.h" #include "scu_registers.h" #include "scic_sds_phy.h" #include "scic_sds_port_configuration_agent.h" #include "scic_sds_port.h" -#include "scic_sds_remote_device.h" +#include "remote_device.h" #include "scic_sds_request.h" #include "sci_environment.h" #include "sci_util.h" diff --git a/drivers/scsi/isci/core/scic_sds_controller.h b/drivers/scsi/isci/core/scic_sds_controller.h index 4bb9a43..e15c4e2 100644 --- a/drivers/scsi/isci/core/scic_sds_controller.h +++ b/drivers/scsi/isci/core/scic_sds_controller.h @@ -73,7 +73,7 @@ #include "scic_config_parameters.h" #include "scic_sds_port.h" #include "scic_sds_phy.h" -#include "scic_sds_remote_node_table.h" +#include "remote_node_table.h" #include "scu_registers.h" #include "scu_constants.h" #include "scu_remote_node_context.h" diff --git a/drivers/scsi/isci/core/scic_sds_phy.c b/drivers/scsi/isci/core/scic_sds_phy.c index 34bd3b2..0901846 100644 --- a/drivers/scsi/isci/core/scic_sds_phy.c +++ b/drivers/scsi/isci/core/scic_sds_phy.c @@ -61,7 +61,7 @@ #include "scic_sds_controller.h" #include "scic_sds_phy.h" #include "scic_sds_port.h" -#include "scic_sds_remote_node_context.h" +#include "remote_node_context.h" #include "sci_environment.h" #include "sci_util.h" #include "scu_event_codes.h" diff --git a/drivers/scsi/isci/core/scic_sds_port.c b/drivers/scsi/isci/core/scic_sds_port.c index a8d7e51..b07e48e 100644 --- a/drivers/scsi/isci/core/scic_sds_port.c +++ b/drivers/scsi/isci/core/scic_sds_port.c @@ -60,8 +60,8 @@ #include "scic_sds_controller.h" #include "scic_sds_phy.h" #include "scic_sds_port.h" -#include "scic_sds_remote_device.h" -#include "scic_sds_remote_node_context.h" +#include "remote_device.h" +#include "remote_node_context.h" #include "scic_sds_request.h" #include "sci_environment.h" #include "scu_registers.h" diff --git a/drivers/scsi/isci/core/scic_sds_remote_device.c b/drivers/scsi/isci/core/scic_sds_remote_device.c deleted file mode 100644 index d314e2b..0000000 --- a/drivers/scsi/isci/core/scic_sds_remote_device.c +++ /dev/null @@ -1,1664 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#include "intel_sas.h" -#include "scic_controller.h" -#include "scic_phy.h" -#include "scic_port.h" -#include "scic_remote_device.h" -#include "scic_sds_controller.h" -#include "scic_sds_phy.h" -#include "scic_sds_port.h" -#include "scic_sds_remote_device.h" -#include "scic_sds_remote_node_context.h" -#include "scic_sds_request.h" -#include "sci_environment.h" -#include "sci_util.h" -#include "scu_event_codes.h" - - -#define SCIC_SDS_REMOTE_DEVICE_RESET_TIMEOUT (1000) - -enum sci_status scic_remote_device_da_construct( - struct scic_sds_remote_device *sci_dev) -{ - enum sci_status status; - u16 remote_node_index; - struct sci_sas_identify_address_frame_protocols protocols; - - /* - * This information is request to determine how many remote node context - * entries will be needed to store the remote node. - */ - scic_sds_port_get_attached_protocols(sci_dev->owning_port, &protocols); - sci_dev->target_protocols.u.all = protocols.u.all; - sci_dev->is_direct_attached = true; -#if !defined(DISABLE_ATAPI) - sci_dev->is_atapi = scic_sds_remote_device_is_atapi(sci_dev); -#endif - - status = scic_sds_controller_allocate_remote_node_context( - sci_dev->owning_port->owning_controller, - sci_dev, - &remote_node_index); - - if (status == SCI_SUCCESS) { - sci_dev->rnc.remote_node_index = remote_node_index; - - scic_sds_port_get_attached_sas_address( - sci_dev->owning_port, &sci_dev->device_address); - - if (sci_dev->target_protocols.u.bits.attached_ssp_target) { - sci_dev->has_ready_substate_machine = false; - } else if (sci_dev->target_protocols.u.bits.attached_stp_target) { - sci_dev->has_ready_substate_machine = true; - - sci_base_state_machine_construct( - &sci_dev->ready_substate_machine, - &sci_dev->parent, - scic_sds_stp_remote_device_ready_substate_table, - SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE); - } else if (sci_dev->target_protocols.u.bits.attached_smp_target) { - sci_dev->has_ready_substate_machine = true; - - /* add the SMP ready substate machine construction here */ - sci_base_state_machine_construct( - &sci_dev->ready_substate_machine, - &sci_dev->parent, - scic_sds_smp_remote_device_ready_substate_table, - SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE); - } - - sci_dev->connection_rate = scic_sds_port_get_max_allowed_speed( - sci_dev->owning_port); - - /* / @todo Should I assign the port width by reading all of the phys on the port? */ - sci_dev->device_port_width = 1; - } - - return status; -} - - -static void scic_sds_remote_device_get_info_from_smp_discover_response( - struct scic_sds_remote_device *sci_dev, - struct smp_response_discover *discover_response) -{ - /* decode discover_response to set sas_address to sci_dev. */ - sci_dev->device_address.high = - discover_response->attached_sas_address.high; - - sci_dev->device_address.low = - discover_response->attached_sas_address.low; - - sci_dev->target_protocols.u.all = discover_response->protocols.u.all; -} - - -enum sci_status scic_remote_device_ea_construct( - struct scic_sds_remote_device *sci_dev, - struct smp_response_discover *discover_response) -{ - enum sci_status status; - struct scic_sds_controller *scic; - - scic = scic_sds_port_get_controller(sci_dev->owning_port); - - scic_sds_remote_device_get_info_from_smp_discover_response( - sci_dev, discover_response); - - status = scic_sds_controller_allocate_remote_node_context( - scic, sci_dev, &sci_dev->rnc.remote_node_index); - - if (status == SCI_SUCCESS) { - if (sci_dev->target_protocols.u.bits.attached_ssp_target) { - sci_dev->has_ready_substate_machine = false; - } else if (sci_dev->target_protocols.u.bits.attached_smp_target) { - sci_dev->has_ready_substate_machine = true; - - /* add the SMP ready substate machine construction here */ - sci_base_state_machine_construct( - &sci_dev->ready_substate_machine, - &sci_dev->parent, - scic_sds_smp_remote_device_ready_substate_table, - SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE); - } else if (sci_dev->target_protocols.u.bits.attached_stp_target) { - sci_dev->has_ready_substate_machine = true; - - sci_base_state_machine_construct( - &sci_dev->ready_substate_machine, - &sci_dev->parent, - scic_sds_stp_remote_device_ready_substate_table, - SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE); - } - - /* - * For SAS-2 the physical link rate is actually a logical link - * rate that incorporates multiplexing. The SCU doesn't - * incorporate multiplexing and for the purposes of the - * connection the logical link rate is that same as the - * physical. Furthermore, the SAS-2 and SAS-1.1 fields overlay - * one another, so this code works for both situations. */ - sci_dev->connection_rate = min_t(u16, - scic_sds_port_get_max_allowed_speed(sci_dev->owning_port), - discover_response->u2.sas1_1.negotiated_physical_link_rate - ); - - /* / @todo Should I assign the port width by reading all of the phys on the port? */ - sci_dev->device_port_width = 1; - } - - return status; -} - -enum sci_status scic_remote_device_destruct( - struct scic_sds_remote_device *sci_dev) -{ - return sci_dev->state_handlers->destruct_handler(sci_dev); -} - - -enum sci_status scic_remote_device_start( - struct scic_sds_remote_device *sci_dev, - u32 timeout) -{ - return sci_dev->state_handlers->start_handler(sci_dev); -} - - -enum sci_status scic_remote_device_stop( - struct scic_sds_remote_device *sci_dev, - u32 timeout) -{ - return sci_dev->state_handlers->stop_handler(sci_dev); -} - - -enum sci_status scic_remote_device_reset( - struct scic_sds_remote_device *sci_dev) -{ - return sci_dev->state_handlers->reset_handler(sci_dev); -} - - -enum sci_status scic_remote_device_reset_complete( - struct scic_sds_remote_device *sci_dev) -{ - return sci_dev->state_handlers->reset_complete_handler(sci_dev); -} - - -enum sas_linkrate scic_remote_device_get_connection_rate( - struct scic_sds_remote_device *sci_dev) -{ - return sci_dev->connection_rate; -} - - -void scic_remote_device_get_protocols( - struct scic_sds_remote_device *sci_dev, - struct smp_discover_response_protocols *pr) -{ - pr->u.all = sci_dev->target_protocols.u.all; -} - -#if !defined(DISABLE_ATAPI) -bool scic_remote_device_is_atapi(struct scic_sds_remote_device *sci_dev) -{ - return sci_dev->is_atapi; -} -#endif - - -/* - * ***************************************************************************** - * * SCU DRIVER STANDARD (SDS) REMOTE DEVICE IMPLEMENTATIONS - * ***************************************************************************** */ - -/** - * - * - * Remote device timer requirements - */ -#define SCIC_SDS_REMOTE_DEVICE_MINIMUM_TIMER_COUNT (0) -#define SCIC_SDS_REMOTE_DEVICE_MAXIMUM_TIMER_COUNT (SCI_MAX_REMOTE_DEVICES) - - -/** - * - * @sci_dev: The remote device for which the suspend is being requested. - * - * This method invokes the remote device suspend state handler. enum sci_status - */ -enum sci_status scic_sds_remote_device_suspend( - struct scic_sds_remote_device *sci_dev, - u32 suspend_type) -{ - return sci_dev->state_handlers->suspend_handler(sci_dev, suspend_type); -} - -/** - * - * @sci_dev: The remote device for which the resume is being requested. - * - * This method invokes the remote device resume state handler. enum sci_status - */ -enum sci_status scic_sds_remote_device_resume( - struct scic_sds_remote_device *sci_dev) -{ - return sci_dev->state_handlers->resume_handler(sci_dev); -} - -/** - * - * @sci_dev: The remote device for which the event handling is being - * requested. - * @frame_index: This is the frame index that is being processed. - * - * This method invokes the frame handler for the remote device state machine - * enum sci_status - */ -enum sci_status scic_sds_remote_device_frame_handler( - struct scic_sds_remote_device *sci_dev, - u32 frame_index) -{ - return sci_dev->state_handlers->frame_handler(sci_dev, frame_index); -} - -/** - * - * @sci_dev: The remote device for which the event handling is being - * requested. - * @event_code: This is the event code that is to be processed. - * - * This method invokes the remote device event handler. enum sci_status - */ -enum sci_status scic_sds_remote_device_event_handler( - struct scic_sds_remote_device *sci_dev, - u32 event_code) -{ - return sci_dev->state_handlers->event_handler(sci_dev, event_code); -} - -/** - * - * @controller: The controller that is starting the io request. - * @sci_dev: The remote device for which the start io handling is being - * requested. - * @io_request: The io request that is being started. - * - * This method invokes the remote device start io handler. enum sci_status - */ -enum sci_status scic_sds_remote_device_start_io( - struct scic_sds_controller *controller, - struct scic_sds_remote_device *sci_dev, - struct scic_sds_request *io_request) -{ - return sci_dev->state_handlers->start_io_handler( - sci_dev, io_request); -} - -/** - * - * @controller: The controller that is completing the io request. - * @sci_dev: The remote device for which the complete io handling is being - * requested. - * @io_request: The io request that is being completed. - * - * This method invokes the remote device complete io handler. enum sci_status - */ -enum sci_status scic_sds_remote_device_complete_io( - struct scic_sds_controller *controller, - struct scic_sds_remote_device *sci_dev, - struct scic_sds_request *io_request) -{ - return sci_dev->state_handlers->complete_io_handler( - sci_dev, io_request); -} - -/** - * - * @controller: The controller that is starting the task request. - * @sci_dev: The remote device for which the start task handling is being - * requested. - * @io_request: The task request that is being started. - * - * This method invokes the remote device start task handler. enum sci_status - */ -enum sci_status scic_sds_remote_device_start_task( - struct scic_sds_controller *controller, - struct scic_sds_remote_device *sci_dev, - struct scic_sds_request *io_request) -{ - return sci_dev->state_handlers->start_task_handler( - sci_dev, io_request); -} - -/** - * - * @controller: The controller that is completing the task request. - * @sci_dev: The remote device for which the complete task handling is - * being requested. - * @io_request: The task request that is being completed. - * - * This method invokes the remote device complete task handler. enum sci_status - */ - -/** - * - * @sci_dev: - * @request: - * - * This method takes the request and bulids an appropriate SCU context for the - * request and then requests the controller to post the request. none - */ -void scic_sds_remote_device_post_request( - struct scic_sds_remote_device *sci_dev, - u32 request) -{ - u32 context; - - context = scic_sds_remote_device_build_command_context(sci_dev, request); - - scic_sds_controller_post_request( - scic_sds_remote_device_get_controller(sci_dev), - context - ); -} - -#if !defined(DISABLE_ATAPI) -/** - * - * @sci_dev: The device to be checked. - * - * This method check the signature fis of a stp device to decide whether a - * device is atapi or not. true if a device is atapi device. False if a device - * is not atapi. - */ -bool scic_sds_remote_device_is_atapi( - struct scic_sds_remote_device *sci_dev) -{ - if (!sci_dev->target_protocols.u.bits.attached_stp_target) - return false; - else if (sci_dev->is_direct_attached) { - struct scic_sds_phy *phy; - struct scic_sata_phy_properties properties; - struct sata_fis_reg_d2h *signature_fis; - phy = scic_sds_port_get_a_connected_phy(sci_dev->owning_port); - scic_sata_phy_get_properties(phy, &properties); - - /* decode the signature fis. */ - signature_fis = &(properties.signature_fis); - - if ((signature_fis->sector_count == 0x01) - && (signature_fis->lba_low == 0x01) - && (signature_fis->lba_mid == 0x14) - && (signature_fis->lba_high == 0xEB) - && ((signature_fis->device & 0x5F) == 0x00) - ) { - /* An ATA device supporting the PACKET command set. */ - return true; - } else - return false; - } else { - /* Expander supported ATAPI device is not currently supported. */ - return false; - } -} -#endif - -/** - * - * @user_parameter: This is cast to a remote device object. - * - * This method is called once the remote node context is ready to be freed. - * The remote device can now report that its stop operation is complete. none - */ -static void scic_sds_cb_remote_device_rnc_destruct_complete( - void *user_parameter) -{ - struct scic_sds_remote_device *sci_dev; - - sci_dev = (struct scic_sds_remote_device *)user_parameter; - - BUG_ON(sci_dev->started_request_count != 0); - - sci_base_state_machine_change_state(&sci_dev->state_machine, - SCI_BASE_REMOTE_DEVICE_STATE_STOPPED); -} - -/** - * - * @user_parameter: This is cast to a remote device object. - * - * This method is called once the remote node context has transisitioned to a - * ready state. This is the indication that the remote device object can also - * transition to ready. none - */ -static void scic_sds_remote_device_resume_complete_handler( - void *user_parameter) -{ - struct scic_sds_remote_device *sci_dev; - - sci_dev = (struct scic_sds_remote_device *)user_parameter; - - if ( - sci_base_state_machine_get_state(&sci_dev->state_machine) - != SCI_BASE_REMOTE_DEVICE_STATE_READY - ) { - sci_base_state_machine_change_state( - &sci_dev->state_machine, - SCI_BASE_REMOTE_DEVICE_STATE_READY - ); - } -} - -/** - * - * @device: This parameter specifies the device for which the request is being - * started. - * @request: This parameter specifies the request being started. - * @status: This parameter specifies the current start operation status. - * - * This method will perform the STP request start processing common to IO - * requests and task requests of all types. none - */ -void scic_sds_remote_device_start_request( - struct scic_sds_remote_device *sci_dev, - struct scic_sds_request *sci_req, - enum sci_status status) -{ - /* We still have a fault in starting the io complete it on the port */ - if (status == SCI_SUCCESS) - scic_sds_remote_device_increment_request_count(sci_dev); - else{ - sci_dev->owning_port->state_handlers->complete_io_handler( - sci_dev->owning_port, sci_dev, sci_req - ); - } -} - - -/** - * - * @request: This parameter specifies the request being continued. - * - * This method will continue to post tc for a STP request. This method usually - * serves as a callback when RNC gets resumed during a task management - * sequence. none - */ -void scic_sds_remote_device_continue_request(void *dev) -{ - struct scic_sds_remote_device *sci_dev = dev; - - /* we need to check if this request is still valid to continue. */ - if (sci_dev->working_request) - scic_controller_continue_io(sci_dev->working_request); -} - -/** - * - * @user_parameter: This is cast to a remote device object. - * - * This method is called once the remote node context has reached a suspended - * state. The remote device can now report that its suspend operation is - * complete. none - */ - -/** - * This method will terminate all of the IO requests in the controllers IO - * request table that were targeted for this device. - * @sci_dev: This parameter specifies the remote device for which to - * attempt to terminate all requests. - * - * This method returns an indication as to whether all requests were - * successfully terminated. If a single request fails to be terminated, then - * this method will return the failure. - */ -static enum sci_status scic_sds_remote_device_terminate_requests( - struct scic_sds_remote_device *sci_dev) -{ - enum sci_status status = SCI_SUCCESS; - enum sci_status terminate_status = SCI_SUCCESS; - struct scic_sds_request *sci_req; - u32 index; - u32 request_count = sci_dev->started_request_count; - - for (index = 0; - (index < SCI_MAX_IO_REQUESTS) && (request_count > 0); - index++) { - sci_req = sci_dev->owning_port->owning_controller->io_request_table[index]; - - if ((sci_req != NULL) && (sci_req->target_device == sci_dev)) { - terminate_status = scic_controller_terminate_request( - sci_dev->owning_port->owning_controller, - sci_dev, - sci_req - ); - - if (terminate_status != SCI_SUCCESS) - status = terminate_status; - - request_count--; - } - } - - return status; -} - -static enum sci_status -default_device_handler(struct scic_sds_remote_device *sci_dev, - const char *func) -{ - dev_warn(scirdev_to_dev(sci_dev), - "%s: in wrong state: %d\n", func, - sci_base_state_machine_get_state(&sci_dev->state_machine)); - return SCI_FAILURE_INVALID_STATE; -} - -enum sci_status scic_sds_remote_device_default_start_handler( - struct scic_sds_remote_device *sci_dev) -{ - return default_device_handler(sci_dev, __func__); -} - -static enum sci_status scic_sds_remote_device_default_stop_handler( - struct scic_sds_remote_device *sci_dev) -{ - return default_device_handler(sci_dev, __func__); -} - -enum sci_status scic_sds_remote_device_default_fail_handler( - struct scic_sds_remote_device *sci_dev) -{ - return default_device_handler(sci_dev, __func__); -} - -enum sci_status scic_sds_remote_device_default_destruct_handler( - struct scic_sds_remote_device *sci_dev) -{ - return default_device_handler(sci_dev, __func__); -} - -enum sci_status scic_sds_remote_device_default_reset_handler( - struct scic_sds_remote_device *sci_dev) -{ - return default_device_handler(sci_dev, __func__); -} - -enum sci_status scic_sds_remote_device_default_reset_complete_handler( - struct scic_sds_remote_device *sci_dev) -{ - return default_device_handler(sci_dev, __func__); -} - -enum sci_status scic_sds_remote_device_default_suspend_handler( - struct scic_sds_remote_device *sci_dev, u32 suspend_type) -{ - return default_device_handler(sci_dev, __func__); -} - -enum sci_status scic_sds_remote_device_default_resume_handler( - struct scic_sds_remote_device *sci_dev) -{ - return default_device_handler(sci_dev, __func__); -} - -/** - * - * @device: The struct scic_sds_remote_device which is then cast into a - * struct scic_sds_remote_device. - * @event_code: The event code that the struct scic_sds_controller wants the device - * object to process. - * - * This method is the default event handler. It will call the RNC state - * machine handler for any RNC events otherwise it will log a warning and - * returns a failure. enum sci_status SCI_FAILURE_INVALID_STATE - */ -static enum sci_status scic_sds_remote_device_core_event_handler( - struct scic_sds_remote_device *sci_dev, - u32 event_code, - bool is_ready_state) -{ - enum sci_status status; - - switch (scu_get_event_type(event_code)) { - case SCU_EVENT_TYPE_RNC_OPS_MISC: - case SCU_EVENT_TYPE_RNC_SUSPEND_TX: - case SCU_EVENT_TYPE_RNC_SUSPEND_TX_RX: - status = scic_sds_remote_node_context_event_handler(&sci_dev->rnc, event_code); - break; - case SCU_EVENT_TYPE_PTX_SCHEDULE_EVENT: - - if (scu_get_event_code(event_code) == SCU_EVENT_IT_NEXUS_TIMEOUT) { - status = SCI_SUCCESS; - - /* Suspend the associated RNC */ - scic_sds_remote_node_context_suspend(&sci_dev->rnc, - SCI_SOFTWARE_SUSPENSION, - NULL, NULL); - - dev_dbg(scirdev_to_dev(sci_dev), - "%s: device: %p event code: %x: %s\n", - __func__, sci_dev, event_code, - (is_ready_state) - ? "I_T_Nexus_Timeout event" - : "I_T_Nexus_Timeout event in wrong state"); - - break; - } - /* Else, fall through and treat as unhandled... */ - - default: - dev_dbg(scirdev_to_dev(sci_dev), - "%s: device: %p event code: %x: %s\n", - __func__, sci_dev, event_code, - (is_ready_state) - ? "unexpected event" - : "unexpected event in wrong state"); - status = SCI_FAILURE_INVALID_STATE; - break; - } - - return status; -} -/** - * - * @device: The struct scic_sds_remote_device which is then cast into a - * struct scic_sds_remote_device. - * @event_code: The event code that the struct scic_sds_controller wants the device - * object to process. - * - * This method is the default event handler. It will call the RNC state - * machine handler for any RNC events otherwise it will log a warning and - * returns a failure. enum sci_status SCI_FAILURE_INVALID_STATE - */ -static enum sci_status scic_sds_remote_device_default_event_handler( - struct scic_sds_remote_device *sci_dev, - u32 event_code) -{ - return scic_sds_remote_device_core_event_handler(sci_dev, - event_code, - false); -} - -/** - * - * @device: The struct scic_sds_remote_device which is then cast into a - * struct scic_sds_remote_device. - * @frame_index: The frame index for which the struct scic_sds_controller wants this - * device object to process. - * - * This method is the default unsolicited frame handler. It logs a warning, - * releases the frame and returns a failure. enum sci_status - * SCI_FAILURE_INVALID_STATE - */ -enum sci_status scic_sds_remote_device_default_frame_handler( - struct scic_sds_remote_device *sci_dev, - u32 frame_index) -{ - dev_warn(scirdev_to_dev(sci_dev), - "%s: SCIC Remote Device requested to handle frame %x " - "while in wrong state %d\n", - __func__, - frame_index, - sci_base_state_machine_get_state( - &sci_dev->state_machine)); - - /* Return the frame back to the controller */ - scic_sds_controller_release_frame( - scic_sds_remote_device_get_controller(sci_dev), frame_index - ); - - return SCI_FAILURE_INVALID_STATE; -} - -enum sci_status scic_sds_remote_device_default_start_request_handler( - struct scic_sds_remote_device *sci_dev, - struct scic_sds_request *request) -{ - return default_device_handler(sci_dev, __func__); -} - -enum sci_status scic_sds_remote_device_default_complete_request_handler( - struct scic_sds_remote_device *sci_dev, - struct scic_sds_request *request) -{ - return default_device_handler(sci_dev, __func__); -} - -enum sci_status scic_sds_remote_device_default_continue_request_handler( - struct scic_sds_remote_device *sci_dev, - struct scic_sds_request *request) -{ - return default_device_handler(sci_dev, __func__); -} - -/** - * - * @device: The struct scic_sds_remote_device which is then cast into a - * struct scic_sds_remote_device. - * @frame_index: The frame index for which the struct scic_sds_controller wants this - * device object to process. - * - * This method is a general ssp frame handler. In most cases the device object - * needs to route the unsolicited frame processing to the io request object. - * This method decodes the tag for the io request object and routes the - * unsolicited frame to that object. enum sci_status SCI_FAILURE_INVALID_STATE - */ -enum sci_status scic_sds_remote_device_general_frame_handler( - struct scic_sds_remote_device *sci_dev, - u32 frame_index) -{ - enum sci_status result; - struct sci_ssp_frame_header *frame_header; - struct scic_sds_request *io_request; - - result = scic_sds_unsolicited_frame_control_get_header( - &(scic_sds_remote_device_get_controller(sci_dev)->uf_control), - frame_index, - (void **)&frame_header - ); - - if (SCI_SUCCESS == result) { - io_request = scic_sds_controller_get_io_request_from_tag( - scic_sds_remote_device_get_controller(sci_dev), frame_header->tag); - - if ((io_request == NULL) - || (io_request->target_device != sci_dev)) { - /* - * We could not map this tag to a valid IO request - * Just toss the frame and continue */ - scic_sds_controller_release_frame( - scic_sds_remote_device_get_controller(sci_dev), frame_index - ); - } else { - /* The IO request is now in charge of releasing the frame */ - result = io_request->state_handlers->frame_handler( - io_request, frame_index); - } - } - - return result; -} - -/** - * - * @[in]: sci_dev This is the device object that is receiving the event. - * @[in]: event_code The event code to process. - * - * This is a common method for handling events reported to the remote device - * from the controller object. enum sci_status - */ -enum sci_status scic_sds_remote_device_general_event_handler( - struct scic_sds_remote_device *sci_dev, - u32 event_code) -{ - return scic_sds_remote_device_core_event_handler(sci_dev, - event_code, - true); -} - -/* - * ***************************************************************************** - * * STOPPED STATE HANDLERS - * ***************************************************************************** */ - -/** - * - * @device: - * - * This method takes the struct scic_sds_remote_device from a stopped state and - * attempts to start it. The RNC buffer for the device is constructed and the - * device state machine is transitioned to the - * SCIC_BASE_REMOTE_DEVICE_STATE_STARTING. enum sci_status SCI_SUCCESS if there is - * an RNC buffer available to construct the remote device. - * SCI_FAILURE_INSUFFICIENT_RESOURCES if there is no RNC buffer available in - * which to construct the remote device. - */ -static enum sci_status scic_sds_remote_device_stopped_state_start_handler( - struct scic_sds_remote_device *sci_dev) -{ - enum sci_status status; - - status = scic_sds_remote_node_context_resume(&sci_dev->rnc, - scic_sds_remote_device_resume_complete_handler, sci_dev); - - if (status == SCI_SUCCESS) - sci_base_state_machine_change_state(&sci_dev->state_machine, - SCI_BASE_REMOTE_DEVICE_STATE_STARTING); - - return status; -} - -static enum sci_status scic_sds_remote_device_stopped_state_stop_handler( - struct scic_sds_remote_device *sci_dev) -{ - return SCI_SUCCESS; -} - -/** - * - * @sci_dev: The struct scic_sds_remote_device which is cast into a - * struct scic_sds_remote_device. - * - * This method will destruct a struct scic_sds_remote_device that is in a stopped - * state. This is the only state from which a destruct request will succeed. - * The RNi for this struct scic_sds_remote_device is returned to the free pool and the - * device object transitions to the SCI_BASE_REMOTE_DEVICE_STATE_FINAL. - * enum sci_status SCI_SUCCESS - */ -static enum sci_status scic_sds_remote_device_stopped_state_destruct_handler( - struct scic_sds_remote_device *sci_dev) -{ - struct scic_sds_controller *scic; - - scic = scic_sds_remote_device_get_controller(sci_dev); - scic_sds_controller_free_remote_node_context(scic, sci_dev, - sci_dev->rnc.remote_node_index); - sci_dev->rnc.remote_node_index = SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX; - - sci_base_state_machine_change_state(&sci_dev->state_machine, - SCI_BASE_REMOTE_DEVICE_STATE_FINAL); - - return SCI_SUCCESS; -} - -/* - * ***************************************************************************** - * * STARTING STATE HANDLERS - * ***************************************************************************** */ - -static enum sci_status scic_sds_remote_device_starting_state_stop_handler( - struct scic_sds_remote_device *sci_dev) -{ - /* - * This device has not yet started so there had better be no IO requests - */ - BUG_ON(sci_dev->started_request_count != 0); - - /* - * Destroy the remote node context - */ - scic_sds_remote_node_context_destruct(&sci_dev->rnc, - scic_sds_cb_remote_device_rnc_destruct_complete, sci_dev); - - /* - * Transition to the stopping state and wait for the remote node to - * complete being posted and invalidated. - */ - sci_base_state_machine_change_state(&sci_dev->state_machine, - SCI_BASE_REMOTE_DEVICE_STATE_STOPPING); - - return SCI_SUCCESS; -} - -enum sci_status scic_sds_remote_device_ready_state_stop_handler( - struct scic_sds_remote_device *sci_dev) -{ - enum sci_status status = SCI_SUCCESS; - - /* Request the parent state machine to transition to the stopping state */ - sci_base_state_machine_change_state(&sci_dev->state_machine, - SCI_BASE_REMOTE_DEVICE_STATE_STOPPING); - - if (sci_dev->started_request_count == 0) { - scic_sds_remote_node_context_destruct(&sci_dev->rnc, - scic_sds_cb_remote_device_rnc_destruct_complete, - sci_dev); - } else - status = scic_sds_remote_device_terminate_requests(sci_dev); - - return status; -} - -/** - * - * @device: The struct scic_sds_remote_device object which is cast to a - * struct scic_sds_remote_device object. - * - * This is the ready state device reset handler enum sci_status - */ -enum sci_status scic_sds_remote_device_ready_state_reset_handler( - struct scic_sds_remote_device *sci_dev) -{ - /* Request the parent state machine to transition to the stopping state */ - sci_base_state_machine_change_state(&sci_dev->state_machine, - SCI_BASE_REMOTE_DEVICE_STATE_RESETTING); - - return SCI_SUCCESS; -} - -/* - * This method will attempt to start a task request for this device object. The - * remote device object will issue the start request for the task and if - * successful it will start the request for the port object then increment its - * own requet count. enum sci_status SCI_SUCCESS if the task request is started for - * this device object. SCI_FAILURE_INSUFFICIENT_RESOURCES if the io request - * object could not get the resources to start. - */ -static enum sci_status scic_sds_remote_device_ready_state_start_task_handler( - struct scic_sds_remote_device *sci_dev, - struct scic_sds_request *request) -{ - enum sci_status result; - - /* See if the port is in a state where we can start the IO request */ - result = scic_sds_port_start_io( - scic_sds_remote_device_get_port(sci_dev), sci_dev, request); - - if (result == SCI_SUCCESS) { - result = scic_sds_remote_node_context_start_task(&sci_dev->rnc, - request); - if (result == SCI_SUCCESS) - result = scic_sds_request_start(request); - - scic_sds_remote_device_start_request(sci_dev, request, result); - } - - return result; -} - -/* - * This method will attempt to start an io request for this device object. The - * remote device object will issue the start request for the io and if - * successful it will start the request for the port object then increment its - * own requet count. enum sci_status SCI_SUCCESS if the io request is started for - * this device object. SCI_FAILURE_INSUFFICIENT_RESOURCES if the io request - * object could not get the resources to start. - */ -static enum sci_status scic_sds_remote_device_ready_state_start_io_handler( - struct scic_sds_remote_device *sci_dev, - struct scic_sds_request *request) -{ - enum sci_status result; - - /* See if the port is in a state where we can start the IO request */ - result = scic_sds_port_start_io( - scic_sds_remote_device_get_port(sci_dev), sci_dev, request); - - if (result == SCI_SUCCESS) { - result = scic_sds_remote_node_context_start_io(&sci_dev->rnc, request); - if (result == SCI_SUCCESS) - result = scic_sds_request_start(request); - - scic_sds_remote_device_start_request(sci_dev, request, result); - } - - return result; -} - -/* - * This method will complete the request for the remote device object. The - * method will call the completion handler for the request object and if - * successful it will complete the request on the port object then decrement - * its own started_request_count. enum sci_status - */ -static enum sci_status scic_sds_remote_device_ready_state_complete_request_handler( - struct scic_sds_remote_device *sci_dev, - struct scic_sds_request *request) -{ - enum sci_status result; - - result = scic_sds_request_complete(request); - - if (result != SCI_SUCCESS) - return result; - - /* See if the port is in a state - * where we can start the IO request */ - result = scic_sds_port_complete_io( - scic_sds_remote_device_get_port(sci_dev), - sci_dev, request); - - if (result == SCI_SUCCESS) - scic_sds_remote_device_decrement_request_count(sci_dev); - - return result; -} - -/* - * ***************************************************************************** - * * STOPPING STATE HANDLERS - * ***************************************************************************** */ - -/** - * - * @sci_dev: The struct scic_sds_remote_device which is cast into a - * struct scic_sds_remote_device. - * - * This method will stop a struct scic_sds_remote_device that is already in the - * SCI_BASE_REMOTE_DEVICE_STATE_STOPPING state. This is not considered an error - * since we allow a stop request on a device that is alreay stopping or - * stopped. enum sci_status SCI_SUCCESS - */ -static enum sci_status scic_sds_remote_device_stopping_state_stop_handler( - struct scic_sds_remote_device *device) -{ - /* - * All requests should have been terminated, but if there is an - * attempt to stop a device already in the stopping state, then - * try again to terminate. */ - return scic_sds_remote_device_terminate_requests(device); -} - - -/** - * - * @device: The device object for which the request is completing. - * @request: The task request that is being completed. - * - * This method completes requests for this struct scic_sds_remote_device while it is - * in the SCI_BASE_REMOTE_DEVICE_STATE_STOPPING state. This method calls the - * complete method for the request object and if that is successful the port - * object is called to complete the task request. Then the device object itself - * completes the task request. If struct scic_sds_remote_device started_request_count - * goes to 0 and the invalidate RNC request has completed the device object can - * transition to the SCI_BASE_REMOTE_DEVICE_STATE_STOPPED. enum sci_status - */ -static enum sci_status scic_sds_remote_device_stopping_state_complete_request_handler( - struct scic_sds_remote_device *sci_dev, - struct scic_sds_request *request) -{ - enum sci_status status = SCI_SUCCESS; - - status = scic_sds_request_complete(request); - - if (status != SCI_SUCCESS) - return status; - - status = scic_sds_port_complete_io(scic_sds_remote_device_get_port(sci_dev), - sci_dev, request); - if (status != SCI_SUCCESS) - return status; - - scic_sds_remote_device_decrement_request_count(sci_dev); - - if (scic_sds_remote_device_get_request_count(sci_dev) == 0) - scic_sds_remote_node_context_destruct(&sci_dev->rnc, - scic_sds_cb_remote_device_rnc_destruct_complete, - sci_dev); - return SCI_SUCCESS; -} - -/** - * - * @device: The struct scic_sds_remote_device which is to be cast into a - * struct scic_sds_remote_device object. - * - * This method will complete the reset operation when the device is in the - * resetting state. enum sci_status - */ -static enum sci_status scic_sds_remote_device_resetting_state_reset_complete_handler( - struct scic_sds_remote_device *sci_dev) -{ - - sci_base_state_machine_change_state( - &sci_dev->state_machine, - SCI_BASE_REMOTE_DEVICE_STATE_READY - ); - - return SCI_SUCCESS; -} - -/** - * - * @device: The struct scic_sds_remote_device which is to be cast into a - * struct scic_sds_remote_device object. - * - * This method will stop the remote device while in the resetting state. - * enum sci_status - */ -static enum sci_status scic_sds_remote_device_resetting_state_stop_handler( - struct scic_sds_remote_device *sci_dev) -{ - sci_base_state_machine_change_state( - &sci_dev->state_machine, - SCI_BASE_REMOTE_DEVICE_STATE_STOPPING - ); - - return SCI_SUCCESS; -} - -/* - * This method completes requests for this struct scic_sds_remote_device while it is - * in the SCI_BASE_REMOTE_DEVICE_STATE_RESETTING state. This method calls the - * complete method for the request object and if that is successful the port - * object is called to complete the task request. Then the device object itself - * completes the task request. enum sci_status - */ -static enum sci_status scic_sds_remote_device_resetting_state_complete_request_handler( - struct scic_sds_remote_device *sci_dev, - struct scic_sds_request *request) -{ - enum sci_status status = SCI_SUCCESS; - - status = scic_sds_request_complete(request); - - if (status == SCI_SUCCESS) { - status = scic_sds_port_complete_io( - scic_sds_remote_device_get_port(sci_dev), - sci_dev, request); - - if (status == SCI_SUCCESS) { - scic_sds_remote_device_decrement_request_count(sci_dev); - } - } - - return status; -} - -/* - * ***************************************************************************** - * * FAILED STATE HANDLERS - * ***************************************************************************** */ - -/** - * - * @device: The struct scic_sds_remote_device which is to be cast into a - * struct scic_sds_remote_device object. - * - * This method handles the remove request for a failed struct scic_sds_remote_device - * object. The method will transition the device object to the - * SCIC_BASE_REMOTE_DEVICE_STATE_STOPPING. enum sci_status SCI_SUCCESS - */ - -/* --------------------------------------------------------------------------- */ - -static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_state_handler_table[] = { - [SCI_BASE_REMOTE_DEVICE_STATE_INITIAL] = { - .start_handler = scic_sds_remote_device_default_start_handler, - .stop_handler = scic_sds_remote_device_default_stop_handler, - .fail_handler = scic_sds_remote_device_default_fail_handler, - .destruct_handler = scic_sds_remote_device_default_destruct_handler, - .reset_handler = scic_sds_remote_device_default_reset_handler, - .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, - .start_io_handler = scic_sds_remote_device_default_start_request_handler, - .complete_io_handler = scic_sds_remote_device_default_complete_request_handler, - .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, - .start_task_handler = scic_sds_remote_device_default_start_request_handler, - .complete_task_handler = scic_sds_remote_device_default_complete_request_handler, - .suspend_handler = scic_sds_remote_device_default_suspend_handler, - .resume_handler = scic_sds_remote_device_default_resume_handler, - .event_handler = scic_sds_remote_device_default_event_handler, - .frame_handler = scic_sds_remote_device_default_frame_handler - }, - [SCI_BASE_REMOTE_DEVICE_STATE_STOPPED] = { - .start_handler = scic_sds_remote_device_stopped_state_start_handler, - .stop_handler = scic_sds_remote_device_stopped_state_stop_handler, - .fail_handler = scic_sds_remote_device_default_fail_handler, - .destruct_handler = scic_sds_remote_device_stopped_state_destruct_handler, - .reset_handler = scic_sds_remote_device_default_reset_handler, - .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, - .start_io_handler = scic_sds_remote_device_default_start_request_handler, - .complete_io_handler = scic_sds_remote_device_default_complete_request_handler, - .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, - .start_task_handler = scic_sds_remote_device_default_start_request_handler, - .complete_task_handler = scic_sds_remote_device_default_complete_request_handler, - .suspend_handler = scic_sds_remote_device_default_suspend_handler, - .resume_handler = scic_sds_remote_device_default_resume_handler, - .event_handler = scic_sds_remote_device_default_event_handler, - .frame_handler = scic_sds_remote_device_default_frame_handler - }, - [SCI_BASE_REMOTE_DEVICE_STATE_STARTING] = { - .start_handler = scic_sds_remote_device_default_start_handler, - .stop_handler = scic_sds_remote_device_starting_state_stop_handler, - .fail_handler = scic_sds_remote_device_default_fail_handler, - .destruct_handler = scic_sds_remote_device_default_destruct_handler, - .reset_handler = scic_sds_remote_device_default_reset_handler, - .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, - .start_io_handler = scic_sds_remote_device_default_start_request_handler, - .complete_io_handler = scic_sds_remote_device_default_complete_request_handler, - .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, - .start_task_handler = scic_sds_remote_device_default_start_request_handler, - .complete_task_handler = scic_sds_remote_device_default_complete_request_handler, - .suspend_handler = scic_sds_remote_device_default_suspend_handler, - .resume_handler = scic_sds_remote_device_default_resume_handler, - .event_handler = scic_sds_remote_device_general_event_handler, - .frame_handler = scic_sds_remote_device_default_frame_handler - }, - [SCI_BASE_REMOTE_DEVICE_STATE_READY] = { - .start_handler = scic_sds_remote_device_default_start_handler, - .stop_handler = scic_sds_remote_device_ready_state_stop_handler, - .fail_handler = scic_sds_remote_device_default_fail_handler, - .destruct_handler = scic_sds_remote_device_default_destruct_handler, - .reset_handler = scic_sds_remote_device_ready_state_reset_handler, - .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, - .start_io_handler = scic_sds_remote_device_ready_state_start_io_handler, - .complete_io_handler = scic_sds_remote_device_ready_state_complete_request_handler, - .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, - .start_task_handler = scic_sds_remote_device_ready_state_start_task_handler, - .complete_task_handler = scic_sds_remote_device_ready_state_complete_request_handler, - .suspend_handler = scic_sds_remote_device_default_suspend_handler, - .resume_handler = scic_sds_remote_device_default_resume_handler, - .event_handler = scic_sds_remote_device_general_event_handler, - .frame_handler = scic_sds_remote_device_general_frame_handler, - }, - [SCI_BASE_REMOTE_DEVICE_STATE_STOPPING] = { - .start_handler = scic_sds_remote_device_default_start_handler, - .stop_handler = scic_sds_remote_device_stopping_state_stop_handler, - .fail_handler = scic_sds_remote_device_default_fail_handler, - .destruct_handler = scic_sds_remote_device_default_destruct_handler, - .reset_handler = scic_sds_remote_device_default_reset_handler, - .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, - .start_io_handler = scic_sds_remote_device_default_start_request_handler, - .complete_io_handler = scic_sds_remote_device_stopping_state_complete_request_handler, - .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, - .start_task_handler = scic_sds_remote_device_default_start_request_handler, - .complete_task_handler = scic_sds_remote_device_stopping_state_complete_request_handler, - .suspend_handler = scic_sds_remote_device_default_suspend_handler, - .resume_handler = scic_sds_remote_device_default_resume_handler, - .event_handler = scic_sds_remote_device_general_event_handler, - .frame_handler = scic_sds_remote_device_general_frame_handler - }, - [SCI_BASE_REMOTE_DEVICE_STATE_FAILED] = { - .start_handler = scic_sds_remote_device_default_start_handler, - .stop_handler = scic_sds_remote_device_default_stop_handler, - .fail_handler = scic_sds_remote_device_default_fail_handler, - .destruct_handler = scic_sds_remote_device_default_destruct_handler, - .reset_handler = scic_sds_remote_device_default_reset_handler, - .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, - .start_io_handler = scic_sds_remote_device_default_start_request_handler, - .complete_io_handler = scic_sds_remote_device_default_complete_request_handler, - .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, - .start_task_handler = scic_sds_remote_device_default_start_request_handler, - .complete_task_handler = scic_sds_remote_device_default_complete_request_handler, - .suspend_handler = scic_sds_remote_device_default_suspend_handler, - .resume_handler = scic_sds_remote_device_default_resume_handler, - .event_handler = scic_sds_remote_device_default_event_handler, - .frame_handler = scic_sds_remote_device_general_frame_handler - }, - [SCI_BASE_REMOTE_DEVICE_STATE_RESETTING] = { - .start_handler = scic_sds_remote_device_default_start_handler, - .stop_handler = scic_sds_remote_device_resetting_state_stop_handler, - .fail_handler = scic_sds_remote_device_default_fail_handler, - .destruct_handler = scic_sds_remote_device_default_destruct_handler, - .reset_handler = scic_sds_remote_device_default_reset_handler, - .reset_complete_handler = scic_sds_remote_device_resetting_state_reset_complete_handler, - .start_io_handler = scic_sds_remote_device_default_start_request_handler, - .complete_io_handler = scic_sds_remote_device_resetting_state_complete_request_handler, - .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, - .start_task_handler = scic_sds_remote_device_default_start_request_handler, - .complete_task_handler = scic_sds_remote_device_resetting_state_complete_request_handler, - .suspend_handler = scic_sds_remote_device_default_suspend_handler, - .resume_handler = scic_sds_remote_device_default_resume_handler, - .event_handler = scic_sds_remote_device_default_event_handler, - .frame_handler = scic_sds_remote_device_general_frame_handler - }, - [SCI_BASE_REMOTE_DEVICE_STATE_FINAL] = { - .start_handler = scic_sds_remote_device_default_start_handler, - .stop_handler = scic_sds_remote_device_default_stop_handler, - .fail_handler = scic_sds_remote_device_default_fail_handler, - .destruct_handler = scic_sds_remote_device_default_destruct_handler, - .reset_handler = scic_sds_remote_device_default_reset_handler, - .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, - .start_io_handler = scic_sds_remote_device_default_start_request_handler, - .complete_io_handler = scic_sds_remote_device_default_complete_request_handler, - .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, - .start_task_handler = scic_sds_remote_device_default_start_request_handler, - .complete_task_handler = scic_sds_remote_device_default_complete_request_handler, - .suspend_handler = scic_sds_remote_device_default_suspend_handler, - .resume_handler = scic_sds_remote_device_default_resume_handler, - .event_handler = scic_sds_remote_device_default_event_handler, - .frame_handler = scic_sds_remote_device_default_frame_handler - } -}; - -/** - * - * @object: This is the struct sci_base_object that is cast into a - * struct scic_sds_remote_device. - * - * This is the enter method for the SCI_BASE_REMOTE_DEVICE_STATE_INITIAL it - * immediatly transitions the remote device object to the stopped state. none - */ -static void scic_sds_remote_device_initial_state_enter( - struct sci_base_object *object) -{ - struct scic_sds_remote_device *sci_dev = (struct scic_sds_remote_device *)object; - - sci_dev = container_of(object, typeof(*sci_dev), parent); - SET_STATE_HANDLER(sci_dev, scic_sds_remote_device_state_handler_table, - SCI_BASE_REMOTE_DEVICE_STATE_INITIAL); - - /* Initial state is a transitional state to the stopped state */ - sci_base_state_machine_change_state(&sci_dev->state_machine, - SCI_BASE_REMOTE_DEVICE_STATE_STOPPED); -} - -/** - * - * @object: This is the struct sci_base_object that is cast into a - * struct scic_sds_remote_device. - * - * This is the enter function for the SCI_BASE_REMOTE_DEVICE_STATE_INITIAL it - * sets the stopped state handlers and if this state is entered from the - * SCI_BASE_REMOTE_DEVICE_STATE_STOPPING then the SCI User is informed that the - * device stop is complete. none - */ -static void scic_sds_remote_device_stopped_state_enter( - struct sci_base_object *object) -{ - struct scic_sds_remote_device *sci_dev; - struct scic_sds_controller *scic; - struct isci_remote_device *idev; - struct isci_host *ihost; - u32 prev_state; - - sci_dev = container_of(object, typeof(*sci_dev), parent); - scic = scic_sds_remote_device_get_controller(sci_dev); - ihost = sci_object_get_association(scic); - idev = sci_object_get_association(sci_dev); - - SET_STATE_HANDLER(sci_dev, scic_sds_remote_device_state_handler_table, - SCI_BASE_REMOTE_DEVICE_STATE_STOPPED); - - /* If we are entering from the stopping state let the SCI User know that - * the stop operation has completed. - */ - prev_state = sci_dev->state_machine.previous_state_id; - if (prev_state == SCI_BASE_REMOTE_DEVICE_STATE_STOPPING) - isci_remote_device_stop_complete(ihost, idev, SCI_SUCCESS); - - scic_sds_controller_remote_device_stopped(scic, sci_dev); -} - -/** - * - * @object: This is the struct sci_base_object that is cast into a - * struct scic_sds_remote_device. - * - * This is the enter function for the SCI_BASE_REMOTE_DEVICE_STATE_STARTING it - * sets the starting state handlers, sets the device not ready, and posts the - * remote node context to the hardware. none - */ -static void scic_sds_remote_device_starting_state_enter(struct sci_base_object *object) -{ - struct scic_sds_remote_device *sci_dev = container_of(object, typeof(*sci_dev), - parent); - struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev); - struct isci_host *ihost = sci_object_get_association(scic); - struct isci_remote_device *idev = sci_object_get_association(sci_dev); - - SET_STATE_HANDLER(sci_dev, scic_sds_remote_device_state_handler_table, - SCI_BASE_REMOTE_DEVICE_STATE_STARTING); - - isci_remote_device_not_ready(ihost, idev, - SCIC_REMOTE_DEVICE_NOT_READY_START_REQUESTED); -} - -static void scic_sds_remote_device_starting_state_exit(struct sci_base_object *object) -{ - struct scic_sds_remote_device *sci_dev = container_of(object, typeof(*sci_dev), - parent); - struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev); - struct isci_host *ihost = sci_object_get_association(scic); - struct isci_remote_device *idev = sci_object_get_association(sci_dev); - - /* - * @todo Check the device object for the proper return code for this - * callback - */ - isci_remote_device_start_complete(ihost, idev, SCI_SUCCESS); -} - -/** - * - * @object: This is the struct sci_base_object that is cast into a - * struct scic_sds_remote_device. - * - * This is the enter function for the SCI_BASE_REMOTE_DEVICE_STATE_READY it sets - * the ready state handlers, and starts the ready substate machine. none - */ -static void scic_sds_remote_device_ready_state_enter(struct sci_base_object *object) -{ - struct scic_sds_remote_device *sci_dev = container_of(object, typeof(*sci_dev), - parent); - struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev); - struct isci_host *ihost = sci_object_get_association(scic); - struct isci_remote_device *idev = sci_object_get_association(sci_dev); - - SET_STATE_HANDLER(sci_dev, - scic_sds_remote_device_state_handler_table, - SCI_BASE_REMOTE_DEVICE_STATE_READY); - - scic->remote_device_sequence[sci_dev->rnc.remote_node_index]++; - - if (sci_dev->has_ready_substate_machine) - sci_base_state_machine_start(&sci_dev->ready_substate_machine); - else - isci_remote_device_ready(ihost, idev); -} - -/** - * - * @object: This is the struct sci_base_object that is cast into a - * struct scic_sds_remote_device. - * - * This is the exit function for the SCI_BASE_REMOTE_DEVICE_STATE_READY it does - * nothing. none - */ -static void scic_sds_remote_device_ready_state_exit( - struct sci_base_object *object) -{ - struct scic_sds_remote_device *sci_dev = container_of(object, typeof(*sci_dev), - parent); - if (sci_dev->has_ready_substate_machine) - sci_base_state_machine_stop(&sci_dev->ready_substate_machine); - else { - struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev); - struct isci_host *ihost = sci_object_get_association(scic); - struct isci_remote_device *idev = sci_object_get_association(sci_dev); - - isci_remote_device_not_ready(ihost, idev, - SCIC_REMOTE_DEVICE_NOT_READY_STOP_REQUESTED); - } -} - -/** - * - * @object: This is the struct sci_base_object that is cast into a - * struct scic_sds_remote_device. - * - * This is the enter method for the SCI_BASE_REMOTE_DEVICE_STATE_STOPPING it - * sets the stopping state handlers and posts an RNC invalidate request to the - * SCU hardware. none - */ -static void scic_sds_remote_device_stopping_state_enter( - struct sci_base_object *object) -{ - struct scic_sds_remote_device *sci_dev = (struct scic_sds_remote_device *)object; - - SET_STATE_HANDLER( - sci_dev, - scic_sds_remote_device_state_handler_table, - SCI_BASE_REMOTE_DEVICE_STATE_STOPPING - ); -} - -/** - * - * @object: This is the struct sci_base_object that is cast into a - * struct scic_sds_remote_device. - * - * This is the enter method for the SCI_BASE_REMOTE_DEVICE_STATE_FAILED it sets - * the stopping state handlers. none - */ -static void scic_sds_remote_device_failed_state_enter( - struct sci_base_object *object) -{ - struct scic_sds_remote_device *sci_dev = (struct scic_sds_remote_device *)object; - - SET_STATE_HANDLER( - sci_dev, - scic_sds_remote_device_state_handler_table, - SCI_BASE_REMOTE_DEVICE_STATE_FAILED - ); -} - -/** - * - * @object: This is the struct sci_base_object that is cast into a - * struct scic_sds_remote_device. - * - * This is the enter method for the SCI_BASE_REMOTE_DEVICE_STATE_RESETTING it - * sets the resetting state handlers. none - */ -static void scic_sds_remote_device_resetting_state_enter( - struct sci_base_object *object) -{ - struct scic_sds_remote_device *sci_dev = (struct scic_sds_remote_device *)object; - - SET_STATE_HANDLER( - sci_dev, - scic_sds_remote_device_state_handler_table, - SCI_BASE_REMOTE_DEVICE_STATE_RESETTING - ); - - scic_sds_remote_node_context_suspend( - &sci_dev->rnc, SCI_SOFTWARE_SUSPENSION, NULL, NULL); -} - -/** - * - * @object: This is the struct sci_base_object that is cast into a - * struct scic_sds_remote_device. - * - * This is the exit method for the SCI_BASE_REMOTE_DEVICE_STATE_RESETTING it - * does nothing. none - */ -static void scic_sds_remote_device_resetting_state_exit( - struct sci_base_object *object) -{ - struct scic_sds_remote_device *sci_dev = (struct scic_sds_remote_device *)object; - - scic_sds_remote_node_context_resume(&sci_dev->rnc, NULL, NULL); -} - -/** - * - * @object: This is the struct sci_base_object that is cast into a - * struct scic_sds_remote_device. - * - * This is the enter method for the SCI_BASE_REMOTE_DEVICE_STATE_FINAL it sets - * the final state handlers. none - */ -static void scic_sds_remote_device_final_state_enter( - struct sci_base_object *object) -{ - struct scic_sds_remote_device *sci_dev = (struct scic_sds_remote_device *)object; - - SET_STATE_HANDLER( - sci_dev, - scic_sds_remote_device_state_handler_table, - SCI_BASE_REMOTE_DEVICE_STATE_FINAL - ); -} - -/* --------------------------------------------------------------------------- */ - -static const struct sci_base_state scic_sds_remote_device_state_table[] = { - [SCI_BASE_REMOTE_DEVICE_STATE_INITIAL] = { - .enter_state = scic_sds_remote_device_initial_state_enter, - }, - [SCI_BASE_REMOTE_DEVICE_STATE_STOPPED] = { - .enter_state = scic_sds_remote_device_stopped_state_enter, - }, - [SCI_BASE_REMOTE_DEVICE_STATE_STARTING] = { - .enter_state = scic_sds_remote_device_starting_state_enter, - .exit_state = scic_sds_remote_device_starting_state_exit - }, - [SCI_BASE_REMOTE_DEVICE_STATE_READY] = { - .enter_state = scic_sds_remote_device_ready_state_enter, - .exit_state = scic_sds_remote_device_ready_state_exit - }, - [SCI_BASE_REMOTE_DEVICE_STATE_STOPPING] = { - .enter_state = scic_sds_remote_device_stopping_state_enter, - }, - [SCI_BASE_REMOTE_DEVICE_STATE_FAILED] = { - .enter_state = scic_sds_remote_device_failed_state_enter, - }, - [SCI_BASE_REMOTE_DEVICE_STATE_RESETTING] = { - .enter_state = scic_sds_remote_device_resetting_state_enter, - .exit_state = scic_sds_remote_device_resetting_state_exit - }, - [SCI_BASE_REMOTE_DEVICE_STATE_FINAL] = { - .enter_state = scic_sds_remote_device_final_state_enter, - }, -}; - -void scic_remote_device_construct(struct scic_sds_port *sci_port, - struct scic_sds_remote_device *sci_dev) -{ - sci_dev->owning_port = sci_port; - sci_dev->started_request_count = 0; - sci_dev->parent.private = NULL; - - sci_base_state_machine_construct( - &sci_dev->state_machine, - &sci_dev->parent, - scic_sds_remote_device_state_table, - SCI_BASE_REMOTE_DEVICE_STATE_INITIAL - ); - - sci_base_state_machine_start( - &sci_dev->state_machine - ); - - scic_sds_remote_node_context_construct(&sci_dev->rnc, - SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX); - - sci_object_set_association(&sci_dev->rnc, sci_dev); -} diff --git a/drivers/scsi/isci/core/scic_sds_remote_device.h b/drivers/scsi/isci/core/scic_sds_remote_device.h deleted file mode 100644 index bff44b8..0000000 --- a/drivers/scsi/isci/core/scic_sds_remote_device.h +++ /dev/null @@ -1,694 +0,0 @@ -/* - * This file is provided under a dual BSD/GPLv2 license. When using or - * redistributing this file, you may do so under either license. - * - * GPL LICENSE SUMMARY - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of version 2 of the GNU General Public License as - * published by the Free Software Foundation. - * - * This program is distributed in the hope that it will be useful, but - * WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU - * General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 51 Franklin St - Fifth Floor, Boston, MA 02110-1301 USA. - * The full GNU General Public License is included in this distribution - * in the file called LICENSE.GPL. - * - * BSD LICENSE - * - * Copyright(c) 2008 - 2011 Intel Corporation. All rights reserved. - * All rights reserved. - * - * Redistribution and use in source and binary forms, with or without - * modification, are permitted provided that the following conditions - * are met: - * - * * Redistributions of source code must retain the above copyright - * notice, this list of conditions and the following disclaimer. - * * Redistributions in binary form must reproduce the above copyright - * notice, this list of conditions and the following disclaimer in - * the documentation and/or other materials provided with the - * distribution. - * * Neither the name of Intel Corporation nor the names of its - * contributors may be used to endorse or promote products derived - * from this software without specific prior written permission. - * - * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS - * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT - * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR - * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT - * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, - * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT - * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, - * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY - * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE - * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - */ - -#ifndef _SCIC_SDS_REMOTE_DEVICE_H_ -#define _SCIC_SDS_REMOTE_DEVICE_H_ - -#include "intel_sas.h" -#include "scu_remote_node_context.h" -#include "scic_sds_remote_node_context.h" -#include <scsi/libsas.h> - -/** - * enum scic_sds_remote_device_states - This enumeration depicts all the states - * for the common remote device state machine. - * - * - */ -enum scic_sds_remote_device_states { - /** - * Simply the initial state for the base remote device state machine. - */ - SCI_BASE_REMOTE_DEVICE_STATE_INITIAL, - - /** - * This state indicates that the remote device has successfully been - * stopped. In this state no new IO operations are permitted. - * This state is entered from the INITIAL state. - * This state is entered from the STOPPING state. - */ - SCI_BASE_REMOTE_DEVICE_STATE_STOPPED, - - /** - * This state indicates the the remote device is in the process of - * becoming ready (i.e. starting). In this state no new IO operations - * are permitted. - * This state is entered from the STOPPED state. - */ - SCI_BASE_REMOTE_DEVICE_STATE_STARTING, - - /** - * This state indicates the remote device is now ready. Thus, the user - * is able to perform IO operations on the remote device. - * This state is entered from the STARTING state. - */ - SCI_BASE_REMOTE_DEVICE_STATE_READY, - - /** - * This state indicates that the remote device is in the process of - * stopping. In this state no new IO operations are permitted, but - * existing IO operations are allowed to complete. - * This state is entered from the READY state. - * This state is entered from the FAILED state. - */ - SCI_BASE_REMOTE_DEVICE_STATE_STOPPING, - - /** - * This state indicates that the remote device has failed. - * In this state no new IO operations are permitted. - * This state is entered from the INITIALIZING state. - * This state is entered from the READY state. - */ - SCI_BASE_REMOTE_DEVICE_STATE_FAILED, - - /** - * This state indicates the device is being reset. - * In this state no new IO operations are permitted. - * This state is entered from the READY state. - */ - SCI_BASE_REMOTE_DEVICE_STATE_RESETTING, - - /** - * Simply the final state for the base remote device state machine. - */ - SCI_BASE_REMOTE_DEVICE_STATE_FINAL, -}; - -/** - * enum scic_sds_ssp_remote_device_ready_substates - - * - * This is the enumeration of the ready substates for the - * struct scic_sds_remote_device. - */ -enum scic_sds_ssp_remote_device_ready_substates { - /** - * This is the initial state for the remote device ready substate. - */ - SCIC_SDS_SSP_REMOTE_DEVICE_READY_SUBSTATE_INITIAL, - - /** - * This is the ready operational substate for the remote device. - * This is the normal operational state for a remote device. - */ - SCIC_SDS_SSP_REMOTE_DEVICE_READY_SUBSTATE_OPERATIONAL, - - /** - * This is the suspended state for the remote device. This is the state - * that the device is placed in when a RNC suspend is received by - * the SCU hardware. - */ - SCIC_SDS_SSP_REMOTE_DEVICE_READY_SUBSTATE_SUSPENDED, - - /** - * This is the final state that the device is placed in before a change - * to the base state machine. - */ - SCIC_SDS_SSP_REMOTE_DEVICE_READY_SUBSTATE_FINAL, - - SCIC_SDS_SSP_REMOTE_DEVICE_READY_MAX_SUBSTATES -}; - -/** - * enum scic_sds_stp_remote_device_ready_substates - - * - * This is the enumeration for the struct scic_sds_remote_device ready substates - * for the STP remote device. - */ -enum scic_sds_stp_remote_device_ready_substates { - /** - * This is the idle substate for the stp remote device. When there are no - * active IO for the device it is is in this state. - */ - SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE, - - /** - * This is the command state for for the STP remote device. This state is - * entered when the device is processing a non-NCQ command. The device object - * will fail any new start IO requests until this command is complete. - */ - SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD, - - /** - * This is the NCQ state for the STP remote device. This state is entered - * when the device is processing an NCQ reuqest. It will remain in this state - * so long as there is one or more NCQ requests being processed. - */ - SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ, - - /** - * This is the NCQ error state for the STP remote device. This state is - * entered when an SDB error FIS is received by the device object while in the - * NCQ state. The device object will only accept a READ LOG command while in - * this state. - */ - SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR, - -#if !defined(DISABLE_ATAPI) - /** - * This is the ATAPI error state for the STP ATAPI remote device. This state is - * entered when ATAPI device sends error status FIS without data while the device - * object is in CMD state. A suspension event is expected in this state. The device - * object will resume right away. - */ - SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_ATAPI_ERROR, -#endif - - /** - * This is the READY substate indicates the device is waiting for the RESET task - * coming to be recovered from certain hardware specific error. - */ - SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_AWAIT_RESET, -}; - -/** - * enum scic_sds_smp_remote_device_ready_substates - - * - * This is the enumeration of the ready substates for the SMP REMOTE DEVICE. - */ -enum scic_sds_smp_remote_device_ready_substates { - /** - * This is the ready operational substate for the remote device. This is the - * normal operational state for a remote device. - */ - SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE, - - /** - * This is the suspended state for the remote device. This is the state that - * the device is placed in when a RNC suspend is received by the SCU hardware. - */ - SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD, -}; - -/** - * struct scic_sds_remote_device - This structure contains the data for an SCU - * implementation of the SCU Core device data. - * - * - */ -struct scic_sds_remote_device { - /** - * The field specifies that the parent object for the base remote - * device is the base object itself. - */ - struct sci_base_object parent; - - /** - * This field contains the information for the base remote device state - * machine. - */ - struct sci_base_state_machine state_machine; - - /** - * This field is the programmed device port width. This value is - * written to the RCN data structure to tell the SCU how many open - * connections this device can have. - */ - u32 device_port_width; - - /** - * This field is the programmed connection rate for this remote device. It is - * used to program the TC with the maximum allowed connection rate. - */ - enum sas_linkrate connection_rate; - - /** - * This field contains the allowed target protocols for this remote device. - */ - struct smp_discover_response_protocols target_protocols; - - /** - * This field contains the device SAS address. - */ - struct sci_sas_address device_address; - - /** - * This filed is assinged the value of true if the device is directly - * attached to the port. - */ - bool is_direct_attached; - -#if !defined(DISABLE_ATAPI) - /** - * This filed is assinged the value of true if the device is an ATAPI - * device. - */ - bool is_atapi; -#endif - - /** - * This filed contains a pointer back to the port to which this device - * is assigned. - */ - struct scic_sds_port *owning_port; - - /** - * This field contains the SCU silicon remote node context specific - * information. - */ - struct scic_sds_remote_node_context rnc; - - /** - * This field contains the stated request count for the remote device. The - * device can not reach the SCI_BASE_REMOTE_DEVICE_STATE_STOPPED until all - * requests are complete and the rnc_posted value is false. - */ - u32 started_request_count; - - /** - * This field contains a pointer to the working request object. It is only - * used only for SATA requests since the unsolicited frames we get from the - * hardware have no Tag value to look up the io request object. - */ - struct scic_sds_request *working_request; - - /** - * This field contains the reason for the remote device going not_ready. It is - * assigned in the state handlers and used in the state transition. - */ - u32 not_ready_reason; - - /** - * This field is true if this remote device has an initialzied ready substate - * machine. SSP devices do not have a ready substate machine and STP devices - * have a ready substate machine. - */ - bool has_ready_substate_machine; - - /** - * This field contains the state machine for the ready substate machine for - * this struct scic_sds_remote_device object. - */ - struct sci_base_state_machine ready_substate_machine; - - /** - * This field maintains the set of state handlers for the remote device - * object. These are changed each time the remote device enters a new state. - */ - const struct scic_sds_remote_device_state_handler *state_handlers; -}; - -static inline struct scic_sds_remote_device *rnc_to_dev(struct scic_sds_remote_node_context *rnc) -{ - struct scic_sds_remote_device *sci_dev; - - sci_dev = container_of(rnc, typeof(*sci_dev), rnc); - - return sci_dev; -} - -typedef enum sci_status (*scic_sds_remote_device_request_handler_t)( - struct scic_sds_remote_device *device, - struct scic_sds_request *request); - -typedef enum sci_status (*scic_sds_remote_device_high_priority_request_complete_handler_t)( - struct scic_sds_remote_device *device, - struct scic_sds_request *request, - void *, - enum sci_io_status); - -typedef enum sci_status (*scic_sds_remote_device_handler_t)( - struct scic_sds_remote_device *sci_dev); - -typedef enum sci_status (*scic_sds_remote_device_suspend_handler_t)( - struct scic_sds_remote_device *sci_dev, - u32 suspend_type); - -typedef enum sci_status (*scic_sds_remote_device_resume_handler_t)( - struct scic_sds_remote_device *sci_dev); - -typedef enum sci_status (*scic_sds_remote_device_frame_handler_t)( - struct scic_sds_remote_device *sci_dev, - u32 frame_index); - -typedef enum sci_status (*scic_sds_remote_device_event_handler_t)( - struct scic_sds_remote_device *sci_dev, - u32 event_code); - -typedef void (*scic_sds_remote_device_ready_not_ready_handler_t)( - struct scic_sds_remote_device *sci_dev); - -/** - * struct scic_sds_remote_device_state_handler - This structure conains the - * state handlers that are needed to process requests for the SCU remote - * device objects. - * - * - */ -struct scic_sds_remote_device_state_handler { - /** - * The start_handler specifies the method invoked when a user - * attempts to start a remote device. - */ - scic_sds_remote_device_handler_t start_handler; - - /** - * The stop_handler specifies the method invoked when a user attempts to - * stop a remote device. - */ - scic_sds_remote_device_handler_t stop_handler; - - /** - * The fail_handler specifies the method invoked when a remote device - * failure has occurred. A failure may be due to an inability to - * initialize/configure the device. - */ - scic_sds_remote_device_handler_t fail_handler; - - /** - * The destruct_handler specifies the method invoked when attempting to - * destruct a remote device. - */ - scic_sds_remote_device_handler_t destruct_handler; - - /** - * The reset handler specifies the method invloked when requesting to - * reset a remote device. - */ - scic_sds_remote_device_handler_t reset_handler; - - /** - * The reset complete handler specifies the method invloked when - * reporting that a reset has completed to the remote device. - */ - scic_sds_remote_device_handler_t reset_complete_handler; - - /** - * The start_io_handler specifies the method invoked when a user - * attempts to start an IO request for a remote device. - */ - scic_sds_remote_device_request_handler_t start_io_handler; - - /** - * The complete_io_handler specifies the method invoked when a user - * attempts to complete an IO request for a remote device. - */ - scic_sds_remote_device_request_handler_t complete_io_handler; - - /** - * The continue_io_handler specifies the method invoked when a user - * attempts to continue an IO request for a remote device. - */ - scic_sds_remote_device_request_handler_t continue_io_handler; - - /** - * The start_task_handler specifies the method invoked when a user - * attempts to start a task management request for a remote device. - */ - scic_sds_remote_device_request_handler_t start_task_handler; - - /** - * The complete_task_handler specifies the method invoked when a user - * attempts to complete a task management request for a remote device. - */ - scic_sds_remote_device_request_handler_t complete_task_handler; - - - scic_sds_remote_device_suspend_handler_t suspend_handler; - scic_sds_remote_device_resume_handler_t resume_handler; - scic_sds_remote_device_event_handler_t event_handler; - scic_sds_remote_device_frame_handler_t frame_handler; -}; - -extern const struct sci_base_state scic_sds_ssp_remote_device_ready_substate_table[]; -extern const struct sci_base_state scic_sds_stp_remote_device_ready_substate_table[]; -extern const struct sci_base_state scic_sds_smp_remote_device_ready_substate_table[]; - -/** - * scic_sds_remote_device_increment_request_count() - - * - * This macro incrments the request count for this device - */ -#define scic_sds_remote_device_increment_request_count(sci_dev) \ - ((sci_dev)->started_request_count++) - -/** - * scic_sds_remote_device_decrement_request_count() - - * - * This macro decrements the request count for this device. This count will - * never decrment past 0. - */ -#define scic_sds_remote_device_decrement_request_count(sci_dev) \ - ((sci_dev)->started_request_count > 0 ? \ - (sci_dev)->started_request_count-- : 0) - -/** - * scic_sds_remote_device_get_request_count() - - * - * This is a helper macro to return the current device request count. - */ -#define scic_sds_remote_device_get_request_count(sci_dev) \ - ((sci_dev)->started_request_count) - -/** - * scic_sds_remote_device_get_port() - - * - * This macro returns the owning port of this remote device obejct. - */ -#define scic_sds_remote_device_get_port(sci_dev) \ - ((sci_dev)->owning_port) - -/** - * scic_sds_remote_device_get_controller() - - * - * This macro returns the controller object that contains this device object - */ -#define scic_sds_remote_device_get_controller(sci_dev) \ - scic_sds_port_get_controller(scic_sds_remote_device_get_port(sci_dev)) - -/** - * scic_sds_remote_device_set_state_handlers() - - * - * This macro sets the remote device state handlers pointer and is set on entry - * to each device state. - */ -#define scic_sds_remote_device_set_state_handlers(sci_dev, handlers) \ - ((sci_dev)->state_handlers = (handlers)) - -/** - * scic_sds_remote_device_get_port() - - * - * This macro returns the owning port of this device - */ -#define scic_sds_remote_device_get_port(sci_dev) \ - ((sci_dev)->owning_port) - -/** - * scic_sds_remote_device_get_sequence() - - * - * This macro returns the remote device sequence value - */ -#define scic_sds_remote_device_get_sequence(sci_dev) \ - (\ - scic_sds_remote_device_get_controller(sci_dev)-> \ - remote_device_sequence[(sci_dev)->rnc.remote_node_index] \ - ) - -/** - * scic_sds_remote_device_get_controller_peg() - - * - * This macro returns the controllers protocol engine group - */ -#define scic_sds_remote_device_get_controller_peg(sci_dev) \ - (\ - scic_sds_controller_get_protocol_engine_group(\ - scic_sds_port_get_controller(\ - scic_sds_remote_device_get_port(sci_dev) \ - ) \ - ) \ - ) - -/** - * scic_sds_remote_device_get_port_index() - - * - * This macro returns the port index for the devices owning port - */ -#define scic_sds_remote_device_get_port_index(sci_dev) \ - (scic_sds_port_get_index(scic_sds_remote_device_get_port(sci_dev))) - -/** - * scic_sds_remote_device_get_index() - - * - * This macro returns the remote node index for this device object - */ -#define scic_sds_remote_device_get_index(sci_dev) \ - ((sci_dev)->rnc.remote_node_index) - -/** - * scic_sds_remote_device_build_command_context() - - * - * This macro builds a remote device context for the SCU post request operation - */ -#define scic_sds_remote_device_build_command_context(device, command) \ - ((command) \ - | (scic_sds_remote_device_get_controller_peg((device)) << SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) \ - | (scic_sds_remote_device_get_port_index((device)) << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT) \ - | (scic_sds_remote_device_get_index((device))) \ - ) - -/** - * scic_sds_remote_device_set_working_request() - - * - * This macro makes the working request assingment for the remote device - * object. To clear the working request use this macro with a NULL request - * object. - */ -#define scic_sds_remote_device_set_working_request(device, request) \ - ((device)->working_request = (request)) - -enum sci_status scic_sds_remote_device_frame_handler( - struct scic_sds_remote_device *sci_dev, - u32 frame_index); - -enum sci_status scic_sds_remote_device_event_handler( - struct scic_sds_remote_device *sci_dev, - u32 event_code); - -enum sci_status scic_sds_remote_device_start_io( - struct scic_sds_controller *controller, - struct scic_sds_remote_device *sci_dev, - struct scic_sds_request *io_request); - -enum sci_status scic_sds_remote_device_complete_io( - struct scic_sds_controller *controller, - struct scic_sds_remote_device *sci_dev, - struct scic_sds_request *io_request); - -enum sci_status scic_sds_remote_device_resume( - struct scic_sds_remote_device *sci_dev); - -enum sci_status scic_sds_remote_device_suspend( - struct scic_sds_remote_device *sci_dev, - u32 suspend_type); - -enum sci_status scic_sds_remote_device_start_task( - struct scic_sds_controller *controller, - struct scic_sds_remote_device *sci_dev, - struct scic_sds_request *io_request); - -void scic_sds_remote_device_post_request( - struct scic_sds_remote_device *sci_dev, - u32 request); - -#if !defined(DISABLE_ATAPI) -bool scic_sds_remote_device_is_atapi( - struct scic_sds_remote_device *sci_dev); -#else /* !defined(DISABLE_ATAPI) */ -#define scic_sds_remote_device_is_atapi(sci_dev) false -#endif /* !defined(DISABLE_ATAPI) */ - -void scic_sds_remote_device_start_request( - struct scic_sds_remote_device *sci_dev, - struct scic_sds_request *sci_req, - enum sci_status status); - -void scic_sds_remote_device_continue_request(void *sci_dev); - -enum sci_status scic_sds_remote_device_default_start_handler( - struct scic_sds_remote_device *sci_dev); - -enum sci_status scic_sds_remote_device_default_fail_handler( - struct scic_sds_remote_device *sci_dev); - -enum sci_status scic_sds_remote_device_default_destruct_handler( - struct scic_sds_remote_device *sci_dev); - -enum sci_status scic_sds_remote_device_default_reset_handler( - struct scic_sds_remote_device *device); - -enum sci_status scic_sds_remote_device_default_reset_complete_handler( - struct scic_sds_remote_device *device); - -enum sci_status scic_sds_remote_device_default_start_request_handler( - struct scic_sds_remote_device *device, - struct scic_sds_request *request); - -enum sci_status scic_sds_remote_device_default_complete_request_handler( - struct scic_sds_remote_device *device, - struct scic_sds_request *request); - -enum sci_status scic_sds_remote_device_default_continue_request_handler( - struct scic_sds_remote_device *device, - struct scic_sds_request *request); - -enum sci_status scic_sds_remote_device_default_suspend_handler( - struct scic_sds_remote_device *sci_dev, - u32 suspend_type); - -enum sci_status scic_sds_remote_device_default_resume_handler( - struct scic_sds_remote_device *sci_dev); - - -enum sci_status scic_sds_remote_device_default_frame_handler( - struct scic_sds_remote_device *sci_dev, - u32 frame_index); - -enum sci_status scic_sds_remote_device_ready_state_stop_handler( - struct scic_sds_remote_device *device); - -enum sci_status scic_sds_remote_device_ready_state_reset_handler( - struct scic_sds_remote_device *device); - -enum sci_status scic_sds_remote_device_general_frame_handler( - struct scic_sds_remote_device *sci_dev, - u32 frame_index); - -enum sci_status scic_sds_remote_device_general_event_handler( - struct scic_sds_remote_device *sci_dev, - u32 event_code); - -enum sci_status scic_sds_ssp_remote_device_ready_suspended_substate_resume_handler( - struct scic_sds_remote_device *sci_dev); - -#endif /* _SCIC_SDS_REMOTE_DEVICE_H_ */ diff --git a/drivers/scsi/isci/core/scic_sds_request.c b/drivers/scsi/isci/core/scic_sds_request.c index 63ebbf3..dfb9412 100644 --- a/drivers/scsi/isci/core/scic_sds_request.c +++ b/drivers/scsi/isci/core/scic_sds_request.c @@ -59,11 +59,10 @@ #include "intel_sat.h" #include "scic_controller.h" #include "scic_io_request.h" -#include "scic_remote_device.h" #include "scic_sds_controller.h" #include "scu_registers.h" #include "scic_sds_port.h" -#include "scic_sds_remote_device.h" +#include "remote_device.h" #include "scic_sds_request.h" #include "scic_sds_smp_request.h" #include "scic_sds_stp_request.h" diff --git a/drivers/scsi/isci/core/scic_sds_smp_request.c b/drivers/scsi/isci/core/scic_sds_smp_request.c index 3274d62..1790f25 100644 --- a/drivers/scsi/isci/core/scic_sds_smp_request.c +++ b/drivers/scsi/isci/core/scic_sds_smp_request.c @@ -56,9 +56,8 @@ #include "intel_sas.h" #include "sci_base_state_machine.h" #include "scic_controller.h" -#include "scic_remote_device.h" #include "scic_sds_controller.h" -#include "scic_sds_remote_device.h" +#include "remote_device.h" #include "scic_sds_request.h" #include "scic_sds_smp_request.h" #include "sci_environment.h" diff --git a/drivers/scsi/isci/core/scic_sds_stp_packet_request.c b/drivers/scsi/isci/core/scic_sds_stp_packet_request.c index e4d2bf5..1cb77bb 100644 --- a/drivers/scsi/isci/core/scic_sds_stp_packet_request.c +++ b/drivers/scsi/isci/core/scic_sds_stp_packet_request.c @@ -61,9 +61,8 @@ #include "sati_translator_sequence.h" #include "sci_base_state.h" #include "scic_controller.h" -#include "scic_remote_device.h" #include "scic_sds_controller.h" -#include "scic_sds_remote_device.h" +#include "remote_device.h" #include "scic_sds_request.h" #include "scic_sds_stp_packet_request.h" #include "scic_user_callback.h" diff --git a/drivers/scsi/isci/core/scic_sds_stp_request.c b/drivers/scsi/isci/core/scic_sds_stp_request.c index ab01f8d..59c5f1b 100644 --- a/drivers/scsi/isci/core/scic_sds_stp_request.c +++ b/drivers/scsi/isci/core/scic_sds_stp_request.c @@ -60,9 +60,8 @@ #include "sci_base_state.h" #include "sci_base_state_machine.h" #include "scic_io_request.h" -#include "scic_remote_device.h" #include "scic_sds_controller.h" -#include "scic_sds_remote_device.h" +#include "remote_device.h" #include "scic_sds_request.h" #include "scic_sds_stp_pio_request.h" #include "scic_sds_stp_request.h" diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c index 3aceb92..676bcdb 100644 --- a/drivers/scsi/isci/host.c +++ b/drivers/scsi/isci/host.c @@ -55,14 +55,12 @@ #include "isci.h" #include "scic_io_request.h" -#include "scic_remote_device.h" #include "scic_port.h" - #include "port.h" #include "request.h" #include "host.h" #include "probe_roms.h" -#include "core/scic_sds_controller.h" +#include "scic_sds_controller.h" irqreturn_t isci_msix_isr(int vec, void *data) { diff --git a/drivers/scsi/isci/host.h b/drivers/scsi/isci/host.h index 21bd7d8..8dc8d1c 100644 --- a/drivers/scsi/isci/host.h +++ b/drivers/scsi/isci/host.h @@ -61,7 +61,6 @@ /*#include "task.h"*/ #include "timers.h" #include "remote_device.h" -#include "scic_remote_device.h" #define DRV_NAME "isci" #define SCI_PCI_BAR_COUNT 2 diff --git a/drivers/scsi/isci/init.c b/drivers/scsi/isci/init.c index a23ea2c..f7ca9e8 100644 --- a/drivers/scsi/isci/init.c +++ b/drivers/scsi/isci/init.c @@ -62,7 +62,6 @@ #include "isci.h" #include "task.h" #include "sci_controller_constants.h" -#include "scic_remote_device.h" #include "sci_environment.h" #include "probe_roms.h" diff --git a/drivers/scsi/isci/port.c b/drivers/scsi/isci/port.c index cf78cf0..430b29e 100644 --- a/drivers/scsi/isci/port.c +++ b/drivers/scsi/isci/port.c @@ -63,7 +63,6 @@ #include <linux/workqueue.h> #include "isci.h" #include "scic_io_request.h" -#include "scic_remote_device.h" #include "scic_phy.h" #include "scic_sds_phy.h" #include "scic_port.h" diff --git a/drivers/scsi/isci/port.h b/drivers/scsi/isci/port.h index 76546fd..eeac7bb 100644 --- a/drivers/scsi/isci/port.h +++ b/drivers/scsi/isci/port.h @@ -64,6 +64,7 @@ struct isci_phy; struct isci_host; +struct scic_sds_phy; enum isci_status { diff --git a/drivers/scsi/isci/probe_roms.c b/drivers/scsi/isci/probe_roms.c index 2df8d8e..933d811 100644 --- a/drivers/scsi/isci/probe_roms.c +++ b/drivers/scsi/isci/probe_roms.c @@ -33,7 +33,6 @@ #include "isci.h" #include "task.h" #include "sci_controller_constants.h" -#include "scic_remote_device.h" #include "sci_environment.h" #include "probe_roms.h" diff --git a/drivers/scsi/isci/remote_device.c b/drivers/scsi/isci/remote_device.c index 1553221..6b9ea90 100644 --- a/drivers/scsi/isci/remote_device.c +++ b/drivers/scsi/isci/remote_device.c @@ -52,18 +52,1169 @@ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ - +#include "intel_sas.h" #include "isci.h" -#include "scic_io_request.h" -#include "scic_remote_device.h" -#include "scic_phy.h" -#include "scic_port.h" #include "port.h" #include "remote_device.h" #include "request.h" +#include "scic_controller.h" +#include "scic_io_request.h" +#include "scic_phy.h" +#include "scic_port.h" +#include "scic_sds_controller.h" +#include "scic_sds_phy.h" +#include "scic_sds_port.h" +#include "remote_node_context.h" +#include "scic_sds_request.h" +#include "sci_environment.h" +#include "sci_util.h" +#include "scu_event_codes.h" #include "task.h" +enum sci_status scic_remote_device_stop( + struct scic_sds_remote_device *sci_dev, + u32 timeout) +{ + return sci_dev->state_handlers->stop_handler(sci_dev); +} + + +enum sci_status scic_remote_device_reset( + struct scic_sds_remote_device *sci_dev) +{ + return sci_dev->state_handlers->reset_handler(sci_dev); +} + + +enum sci_status scic_remote_device_reset_complete( + struct scic_sds_remote_device *sci_dev) +{ + return sci_dev->state_handlers->reset_complete_handler(sci_dev); +} + + +enum sas_linkrate scic_remote_device_get_connection_rate( + struct scic_sds_remote_device *sci_dev) +{ + return sci_dev->connection_rate; +} + + +void scic_remote_device_get_protocols( + struct scic_sds_remote_device *sci_dev, + struct smp_discover_response_protocols *pr) +{ + pr->u.all = sci_dev->target_protocols.u.all; +} + +#if !defined(DISABLE_ATAPI) +bool scic_remote_device_is_atapi(struct scic_sds_remote_device *sci_dev) +{ + return sci_dev->is_atapi; +} +#endif + + +/** + * + * + * Remote device timer requirements + */ +#define SCIC_SDS_REMOTE_DEVICE_MINIMUM_TIMER_COUNT (0) +#define SCIC_SDS_REMOTE_DEVICE_MAXIMUM_TIMER_COUNT (SCI_MAX_REMOTE_DEVICES) + + +/** + * + * @sci_dev: The remote device for which the suspend is being requested. + * + * This method invokes the remote device suspend state handler. enum sci_status + */ +enum sci_status scic_sds_remote_device_suspend( + struct scic_sds_remote_device *sci_dev, + u32 suspend_type) +{ + return sci_dev->state_handlers->suspend_handler(sci_dev, suspend_type); +} + +/** + * + * @sci_dev: The remote device for which the event handling is being + * requested. + * @frame_index: This is the frame index that is being processed. + * + * This method invokes the frame handler for the remote device state machine + * enum sci_status + */ +enum sci_status scic_sds_remote_device_frame_handler( + struct scic_sds_remote_device *sci_dev, + u32 frame_index) +{ + return sci_dev->state_handlers->frame_handler(sci_dev, frame_index); +} + +/** + * + * @sci_dev: The remote device for which the event handling is being + * requested. + * @event_code: This is the event code that is to be processed. + * + * This method invokes the remote device event handler. enum sci_status + */ +enum sci_status scic_sds_remote_device_event_handler( + struct scic_sds_remote_device *sci_dev, + u32 event_code) +{ + return sci_dev->state_handlers->event_handler(sci_dev, event_code); +} + +/** + * + * @controller: The controller that is starting the io request. + * @sci_dev: The remote device for which the start io handling is being + * requested. + * @io_request: The io request that is being started. + * + * This method invokes the remote device start io handler. enum sci_status + */ +enum sci_status scic_sds_remote_device_start_io( + struct scic_sds_controller *controller, + struct scic_sds_remote_device *sci_dev, + struct scic_sds_request *io_request) +{ + return sci_dev->state_handlers->start_io_handler( + sci_dev, io_request); +} + +/** + * + * @controller: The controller that is completing the io request. + * @sci_dev: The remote device for which the complete io handling is being + * requested. + * @io_request: The io request that is being completed. + * + * This method invokes the remote device complete io handler. enum sci_status + */ +enum sci_status scic_sds_remote_device_complete_io( + struct scic_sds_controller *controller, + struct scic_sds_remote_device *sci_dev, + struct scic_sds_request *io_request) +{ + return sci_dev->state_handlers->complete_io_handler( + sci_dev, io_request); +} + +/** + * + * @controller: The controller that is starting the task request. + * @sci_dev: The remote device for which the start task handling is being + * requested. + * @io_request: The task request that is being started. + * + * This method invokes the remote device start task handler. enum sci_status + */ +enum sci_status scic_sds_remote_device_start_task( + struct scic_sds_controller *controller, + struct scic_sds_remote_device *sci_dev, + struct scic_sds_request *io_request) +{ + return sci_dev->state_handlers->start_task_handler( + sci_dev, io_request); +} + +/** + * + * @controller: The controller that is completing the task request. + * @sci_dev: The remote device for which the complete task handling is + * being requested. + * @io_request: The task request that is being completed. + * + * This method invokes the remote device complete task handler. enum sci_status + */ + +/** + * + * @sci_dev: + * @request: + * + * This method takes the request and bulids an appropriate SCU context for the + * request and then requests the controller to post the request. none + */ +void scic_sds_remote_device_post_request( + struct scic_sds_remote_device *sci_dev, + u32 request) +{ + u32 context; + + context = scic_sds_remote_device_build_command_context(sci_dev, request); + + scic_sds_controller_post_request( + scic_sds_remote_device_get_controller(sci_dev), + context + ); +} + +#if !defined(DISABLE_ATAPI) +/** + * + * @sci_dev: The device to be checked. + * + * This method check the signature fis of a stp device to decide whether a + * device is atapi or not. true if a device is atapi device. False if a device + * is not atapi. + */ +bool scic_sds_remote_device_is_atapi( + struct scic_sds_remote_device *sci_dev) +{ + if (!sci_dev->target_protocols.u.bits.attached_stp_target) + return false; + else if (sci_dev->is_direct_attached) { + struct scic_sds_phy *phy; + struct scic_sata_phy_properties properties; + struct sata_fis_reg_d2h *signature_fis; + phy = scic_sds_port_get_a_connected_phy(sci_dev->owning_port); + scic_sata_phy_get_properties(phy, &properties); + + /* decode the signature fis. */ + signature_fis = &(properties.signature_fis); + + if ((signature_fis->sector_count == 0x01) + && (signature_fis->lba_low == 0x01) + && (signature_fis->lba_mid == 0x14) + && (signature_fis->lba_high == 0xEB) + && ((signature_fis->device & 0x5F) == 0x00) + ) { + /* An ATA device supporting the PACKET command set. */ + return true; + } else + return false; + } else { + /* Expander supported ATAPI device is not currently supported. */ + return false; + } +} +#endif + +/** + * + * @user_parameter: This is cast to a remote device object. + * + * This method is called once the remote node context is ready to be freed. + * The remote device can now report that its stop operation is complete. none + */ +static void scic_sds_cb_remote_device_rnc_destruct_complete( + void *user_parameter) +{ + struct scic_sds_remote_device *sci_dev; + + sci_dev = (struct scic_sds_remote_device *)user_parameter; + + BUG_ON(sci_dev->started_request_count != 0); + + sci_base_state_machine_change_state(&sci_dev->state_machine, + SCI_BASE_REMOTE_DEVICE_STATE_STOPPED); +} + +/** + * + * @user_parameter: This is cast to a remote device object. + * + * This method is called once the remote node context has transisitioned to a + * ready state. This is the indication that the remote device object can also + * transition to ready. none + */ +static void scic_sds_remote_device_resume_complete_handler( + void *user_parameter) +{ + struct scic_sds_remote_device *sci_dev; + + sci_dev = (struct scic_sds_remote_device *)user_parameter; + + if ( + sci_base_state_machine_get_state(&sci_dev->state_machine) + != SCI_BASE_REMOTE_DEVICE_STATE_READY + ) { + sci_base_state_machine_change_state( + &sci_dev->state_machine, + SCI_BASE_REMOTE_DEVICE_STATE_READY + ); + } +} + +/** + * + * @device: This parameter specifies the device for which the request is being + * started. + * @request: This parameter specifies the request being started. + * @status: This parameter specifies the current start operation status. + * + * This method will perform the STP request start processing common to IO + * requests and task requests of all types. none + */ +void scic_sds_remote_device_start_request( + struct scic_sds_remote_device *sci_dev, + struct scic_sds_request *sci_req, + enum sci_status status) +{ + /* We still have a fault in starting the io complete it on the port */ + if (status == SCI_SUCCESS) + scic_sds_remote_device_increment_request_count(sci_dev); + else{ + sci_dev->owning_port->state_handlers->complete_io_handler( + sci_dev->owning_port, sci_dev, sci_req + ); + } +} + + +/** + * + * @request: This parameter specifies the request being continued. + * + * This method will continue to post tc for a STP request. This method usually + * serves as a callback when RNC gets resumed during a task management + * sequence. none + */ +void scic_sds_remote_device_continue_request(void *dev) +{ + struct scic_sds_remote_device *sci_dev = dev; + /* we need to check if this request is still valid to continue. */ + if (sci_dev->working_request) + scic_controller_continue_io(sci_dev->working_request); +} + +/** + * This method will terminate all of the IO requests in the controllers IO + * request table that were targeted for this device. + * @sci_dev: This parameter specifies the remote device for which to + * attempt to terminate all requests. + * + * This method returns an indication as to whether all requests were + * successfully terminated. If a single request fails to be terminated, then + * this method will return the failure. + */ +static enum sci_status scic_sds_remote_device_terminate_requests( + struct scic_sds_remote_device *sci_dev) +{ + enum sci_status status = SCI_SUCCESS; + enum sci_status terminate_status = SCI_SUCCESS; + struct scic_sds_request *sci_req; + u32 index; + u32 request_count = sci_dev->started_request_count; + + for (index = 0; + (index < SCI_MAX_IO_REQUESTS) && (request_count > 0); + index++) { + sci_req = sci_dev->owning_port->owning_controller->io_request_table[index]; + + if ((sci_req != NULL) && (sci_req->target_device == sci_dev)) { + terminate_status = scic_controller_terminate_request( + sci_dev->owning_port->owning_controller, + sci_dev, + sci_req + ); + + if (terminate_status != SCI_SUCCESS) + status = terminate_status; + + request_count--; + } + } + + return status; +} + +static enum sci_status +default_device_handler(struct scic_sds_remote_device *sci_dev, + const char *func) +{ + dev_warn(scirdev_to_dev(sci_dev), + "%s: in wrong state: %d\n", func, + sci_base_state_machine_get_state(&sci_dev->state_machine)); + return SCI_FAILURE_INVALID_STATE; +} + +enum sci_status scic_sds_remote_device_default_start_handler( + struct scic_sds_remote_device *sci_dev) +{ + return default_device_handler(sci_dev, __func__); +} + +static enum sci_status scic_sds_remote_device_default_stop_handler( + struct scic_sds_remote_device *sci_dev) +{ + return default_device_handler(sci_dev, __func__); +} + +enum sci_status scic_sds_remote_device_default_fail_handler( + struct scic_sds_remote_device *sci_dev) +{ + return default_device_handler(sci_dev, __func__); +} + +enum sci_status scic_sds_remote_device_default_destruct_handler( + struct scic_sds_remote_device *sci_dev) +{ + return default_device_handler(sci_dev, __func__); +} + +enum sci_status scic_sds_remote_device_default_reset_handler( + struct scic_sds_remote_device *sci_dev) +{ + return default_device_handler(sci_dev, __func__); +} + +enum sci_status scic_sds_remote_device_default_reset_complete_handler( + struct scic_sds_remote_device *sci_dev) +{ + return default_device_handler(sci_dev, __func__); +} + +enum sci_status scic_sds_remote_device_default_suspend_handler( + struct scic_sds_remote_device *sci_dev, u32 suspend_type) +{ + return default_device_handler(sci_dev, __func__); +} + +enum sci_status scic_sds_remote_device_default_resume_handler( + struct scic_sds_remote_device *sci_dev) +{ + return default_device_handler(sci_dev, __func__); +} + +/** + * + * @device: The struct scic_sds_remote_device which is then cast into a + * struct scic_sds_remote_device. + * @event_code: The event code that the struct scic_sds_controller wants the device + * object to process. + * + * This method is the default event handler. It will call the RNC state + * machine handler for any RNC events otherwise it will log a warning and + * returns a failure. enum sci_status SCI_FAILURE_INVALID_STATE + */ +static enum sci_status scic_sds_remote_device_core_event_handler( + struct scic_sds_remote_device *sci_dev, + u32 event_code, + bool is_ready_state) +{ + enum sci_status status; + + switch (scu_get_event_type(event_code)) { + case SCU_EVENT_TYPE_RNC_OPS_MISC: + case SCU_EVENT_TYPE_RNC_SUSPEND_TX: + case SCU_EVENT_TYPE_RNC_SUSPEND_TX_RX: + status = scic_sds_remote_node_context_event_handler(&sci_dev->rnc, event_code); + break; + case SCU_EVENT_TYPE_PTX_SCHEDULE_EVENT: + + if (scu_get_event_code(event_code) == SCU_EVENT_IT_NEXUS_TIMEOUT) { + status = SCI_SUCCESS; + + /* Suspend the associated RNC */ + scic_sds_remote_node_context_suspend(&sci_dev->rnc, + SCI_SOFTWARE_SUSPENSION, + NULL, NULL); + + dev_dbg(scirdev_to_dev(sci_dev), + "%s: device: %p event code: %x: %s\n", + __func__, sci_dev, event_code, + (is_ready_state) + ? "I_T_Nexus_Timeout event" + : "I_T_Nexus_Timeout event in wrong state"); + + break; + } + /* Else, fall through and treat as unhandled... */ + + default: + dev_dbg(scirdev_to_dev(sci_dev), + "%s: device: %p event code: %x: %s\n", + __func__, sci_dev, event_code, + (is_ready_state) + ? "unexpected event" + : "unexpected event in wrong state"); + status = SCI_FAILURE_INVALID_STATE; + break; + } + + return status; +} +/** + * + * @device: The struct scic_sds_remote_device which is then cast into a + * struct scic_sds_remote_device. + * @event_code: The event code that the struct scic_sds_controller wants the device + * object to process. + * + * This method is the default event handler. It will call the RNC state + * machine handler for any RNC events otherwise it will log a warning and + * returns a failure. enum sci_status SCI_FAILURE_INVALID_STATE + */ +static enum sci_status scic_sds_remote_device_default_event_handler( + struct scic_sds_remote_device *sci_dev, + u32 event_code) +{ + return scic_sds_remote_device_core_event_handler(sci_dev, + event_code, + false); +} + +/** + * + * @device: The struct scic_sds_remote_device which is then cast into a + * struct scic_sds_remote_device. + * @frame_index: The frame index for which the struct scic_sds_controller wants this + * device object to process. + * + * This method is the default unsolicited frame handler. It logs a warning, + * releases the frame and returns a failure. enum sci_status + * SCI_FAILURE_INVALID_STATE + */ +enum sci_status scic_sds_remote_device_default_frame_handler( + struct scic_sds_remote_device *sci_dev, + u32 frame_index) +{ + dev_warn(scirdev_to_dev(sci_dev), + "%s: SCIC Remote Device requested to handle frame %x " + "while in wrong state %d\n", + __func__, + frame_index, + sci_base_state_machine_get_state( + &sci_dev->state_machine)); + + /* Return the frame back to the controller */ + scic_sds_controller_release_frame( + scic_sds_remote_device_get_controller(sci_dev), frame_index + ); + + return SCI_FAILURE_INVALID_STATE; +} + +enum sci_status scic_sds_remote_device_default_start_request_handler( + struct scic_sds_remote_device *sci_dev, + struct scic_sds_request *request) +{ + return default_device_handler(sci_dev, __func__); +} + +enum sci_status scic_sds_remote_device_default_complete_request_handler( + struct scic_sds_remote_device *sci_dev, + struct scic_sds_request *request) +{ + return default_device_handler(sci_dev, __func__); +} + +enum sci_status scic_sds_remote_device_default_continue_request_handler( + struct scic_sds_remote_device *sci_dev, + struct scic_sds_request *request) +{ + return default_device_handler(sci_dev, __func__); +} + +/** + * + * @device: The struct scic_sds_remote_device which is then cast into a + * struct scic_sds_remote_device. + * @frame_index: The frame index for which the struct scic_sds_controller wants this + * device object to process. + * + * This method is a general ssp frame handler. In most cases the device object + * needs to route the unsolicited frame processing to the io request object. + * This method decodes the tag for the io request object and routes the + * unsolicited frame to that object. enum sci_status SCI_FAILURE_INVALID_STATE + */ +enum sci_status scic_sds_remote_device_general_frame_handler( + struct scic_sds_remote_device *sci_dev, + u32 frame_index) +{ + enum sci_status result; + struct sci_ssp_frame_header *frame_header; + struct scic_sds_request *io_request; + + result = scic_sds_unsolicited_frame_control_get_header( + &(scic_sds_remote_device_get_controller(sci_dev)->uf_control), + frame_index, + (void **)&frame_header + ); + + if (SCI_SUCCESS == result) { + io_request = scic_sds_controller_get_io_request_from_tag( + scic_sds_remote_device_get_controller(sci_dev), frame_header->tag); + + if ((io_request == NULL) + || (io_request->target_device != sci_dev)) { + /* + * We could not map this tag to a valid IO request + * Just toss the frame and continue */ + scic_sds_controller_release_frame( + scic_sds_remote_device_get_controller(sci_dev), frame_index + ); + } else { + /* The IO request is now in charge of releasing the frame */ + result = io_request->state_handlers->frame_handler( + io_request, frame_index); + } + } + + return result; +} + +/** + * + * @[in]: sci_dev This is the device object that is receiving the event. + * @[in]: event_code The event code to process. + * + * This is a common method for handling events reported to the remote device + * from the controller object. enum sci_status + */ +enum sci_status scic_sds_remote_device_general_event_handler( + struct scic_sds_remote_device *sci_dev, + u32 event_code) +{ + return scic_sds_remote_device_core_event_handler(sci_dev, + event_code, + true); +} + +/* + * ***************************************************************************** + * * STOPPED STATE HANDLERS + * ***************************************************************************** */ + +/** + * + * @device: + * + * This method takes the struct scic_sds_remote_device from a stopped state and + * attempts to start it. The RNC buffer for the device is constructed and the + * device state machine is transitioned to the + * SCIC_BASE_REMOTE_DEVICE_STATE_STARTING. enum sci_status SCI_SUCCESS if there is + * an RNC buffer available to construct the remote device. + * SCI_FAILURE_INSUFFICIENT_RESOURCES if there is no RNC buffer available in + * which to construct the remote device. + */ +static enum sci_status scic_sds_remote_device_stopped_state_start_handler( + struct scic_sds_remote_device *sci_dev) +{ + enum sci_status status; + + status = scic_sds_remote_node_context_resume(&sci_dev->rnc, + scic_sds_remote_device_resume_complete_handler, sci_dev); + + if (status == SCI_SUCCESS) + sci_base_state_machine_change_state(&sci_dev->state_machine, + SCI_BASE_REMOTE_DEVICE_STATE_STARTING); + + return status; +} + +static enum sci_status scic_sds_remote_device_stopped_state_stop_handler( + struct scic_sds_remote_device *sci_dev) +{ + return SCI_SUCCESS; +} + +/** + * + * @sci_dev: The struct scic_sds_remote_device which is cast into a + * struct scic_sds_remote_device. + * + * This method will destruct a struct scic_sds_remote_device that is in a stopped + * state. This is the only state from which a destruct request will succeed. + * The RNi for this struct scic_sds_remote_device is returned to the free pool and the + * device object transitions to the SCI_BASE_REMOTE_DEVICE_STATE_FINAL. + * enum sci_status SCI_SUCCESS + */ +static enum sci_status scic_sds_remote_device_stopped_state_destruct_handler( + struct scic_sds_remote_device *sci_dev) +{ + struct scic_sds_controller *scic; + + scic = scic_sds_remote_device_get_controller(sci_dev); + scic_sds_controller_free_remote_node_context(scic, sci_dev, + sci_dev->rnc.remote_node_index); + sci_dev->rnc.remote_node_index = SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX; + + sci_base_state_machine_change_state(&sci_dev->state_machine, + SCI_BASE_REMOTE_DEVICE_STATE_FINAL); + + return SCI_SUCCESS; +} + +/* + * ***************************************************************************** + * * STARTING STATE HANDLERS + * ***************************************************************************** */ + +static enum sci_status scic_sds_remote_device_starting_state_stop_handler( + struct scic_sds_remote_device *sci_dev) +{ + /* + * This device has not yet started so there had better be no IO requests + */ + BUG_ON(sci_dev->started_request_count != 0); + + /* + * Destroy the remote node context + */ + scic_sds_remote_node_context_destruct(&sci_dev->rnc, + scic_sds_cb_remote_device_rnc_destruct_complete, sci_dev); + + /* + * Transition to the stopping state and wait for the remote node to + * complete being posted and invalidated. + */ + sci_base_state_machine_change_state(&sci_dev->state_machine, + SCI_BASE_REMOTE_DEVICE_STATE_STOPPING); + + return SCI_SUCCESS; +} + +enum sci_status scic_sds_remote_device_ready_state_stop_handler( + struct scic_sds_remote_device *sci_dev) +{ + enum sci_status status = SCI_SUCCESS; + + /* Request the parent state machine to transition to the stopping state */ + sci_base_state_machine_change_state(&sci_dev->state_machine, + SCI_BASE_REMOTE_DEVICE_STATE_STOPPING); + + if (sci_dev->started_request_count == 0) { + scic_sds_remote_node_context_destruct(&sci_dev->rnc, + scic_sds_cb_remote_device_rnc_destruct_complete, + sci_dev); + } else + status = scic_sds_remote_device_terminate_requests(sci_dev); + + return status; +} + +/** + * + * @device: The struct scic_sds_remote_device object which is cast to a + * struct scic_sds_remote_device object. + * + * This is the ready state device reset handler enum sci_status + */ +enum sci_status scic_sds_remote_device_ready_state_reset_handler( + struct scic_sds_remote_device *sci_dev) +{ + /* Request the parent state machine to transition to the stopping state */ + sci_base_state_machine_change_state(&sci_dev->state_machine, + SCI_BASE_REMOTE_DEVICE_STATE_RESETTING); + + return SCI_SUCCESS; +} + +/* + * This method will attempt to start a task request for this device object. The + * remote device object will issue the start request for the task and if + * successful it will start the request for the port object then increment its + * own requet count. enum sci_status SCI_SUCCESS if the task request is started for + * this device object. SCI_FAILURE_INSUFFICIENT_RESOURCES if the io request + * object could not get the resources to start. + */ +static enum sci_status scic_sds_remote_device_ready_state_start_task_handler( + struct scic_sds_remote_device *sci_dev, + struct scic_sds_request *request) +{ + enum sci_status result; + + /* See if the port is in a state where we can start the IO request */ + result = scic_sds_port_start_io( + scic_sds_remote_device_get_port(sci_dev), sci_dev, request); + + if (result == SCI_SUCCESS) { + result = scic_sds_remote_node_context_start_task(&sci_dev->rnc, + request); + if (result == SCI_SUCCESS) + result = scic_sds_request_start(request); + + scic_sds_remote_device_start_request(sci_dev, request, result); + } + + return result; +} + +/* + * This method will attempt to start an io request for this device object. The + * remote device object will issue the start request for the io and if + * successful it will start the request for the port object then increment its + * own requet count. enum sci_status SCI_SUCCESS if the io request is started for + * this device object. SCI_FAILURE_INSUFFICIENT_RESOURCES if the io request + * object could not get the resources to start. + */ +static enum sci_status scic_sds_remote_device_ready_state_start_io_handler( + struct scic_sds_remote_device *sci_dev, + struct scic_sds_request *request) +{ + enum sci_status result; + + /* See if the port is in a state where we can start the IO request */ + result = scic_sds_port_start_io( + scic_sds_remote_device_get_port(sci_dev), sci_dev, request); + + if (result == SCI_SUCCESS) { + result = scic_sds_remote_node_context_start_io(&sci_dev->rnc, request); + if (result == SCI_SUCCESS) + result = scic_sds_request_start(request); + + scic_sds_remote_device_start_request(sci_dev, request, result); + } + + return result; +} + +/* + * This method will complete the request for the remote device object. The + * method will call the completion handler for the request object and if + * successful it will complete the request on the port object then decrement + * its own started_request_count. enum sci_status + */ +static enum sci_status scic_sds_remote_device_ready_state_complete_request_handler( + struct scic_sds_remote_device *sci_dev, + struct scic_sds_request *request) +{ + enum sci_status result; + + result = scic_sds_request_complete(request); + + if (result != SCI_SUCCESS) + return result; + + /* See if the port is in a state + * where we can start the IO request */ + result = scic_sds_port_complete_io( + scic_sds_remote_device_get_port(sci_dev), + sci_dev, request); + + if (result == SCI_SUCCESS) + scic_sds_remote_device_decrement_request_count(sci_dev); + + return result; +} + +/* + * ***************************************************************************** + * * STOPPING STATE HANDLERS + * ***************************************************************************** */ + +/** + * + * @sci_dev: The struct scic_sds_remote_device which is cast into a + * struct scic_sds_remote_device. + * + * This method will stop a struct scic_sds_remote_device that is already in the + * SCI_BASE_REMOTE_DEVICE_STATE_STOPPING state. This is not considered an error + * since we allow a stop request on a device that is alreay stopping or + * stopped. enum sci_status SCI_SUCCESS + */ +static enum sci_status scic_sds_remote_device_stopping_state_stop_handler( + struct scic_sds_remote_device *device) +{ + /* + * All requests should have been terminated, but if there is an + * attempt to stop a device already in the stopping state, then + * try again to terminate. */ + return scic_sds_remote_device_terminate_requests(device); +} + + +/** + * + * @device: The device object for which the request is completing. + * @request: The task request that is being completed. + * + * This method completes requests for this struct scic_sds_remote_device while it is + * in the SCI_BASE_REMOTE_DEVICE_STATE_STOPPING state. This method calls the + * complete method for the request object and if that is successful the port + * object is called to complete the task request. Then the device object itself + * completes the task request. If struct scic_sds_remote_device started_request_count + * goes to 0 and the invalidate RNC request has completed the device object can + * transition to the SCI_BASE_REMOTE_DEVICE_STATE_STOPPED. enum sci_status + */ +static enum sci_status scic_sds_remote_device_stopping_state_complete_request_handler( + struct scic_sds_remote_device *sci_dev, + struct scic_sds_request *request) +{ + enum sci_status status = SCI_SUCCESS; + + status = scic_sds_request_complete(request); + + if (status != SCI_SUCCESS) + return status; + + status = scic_sds_port_complete_io(scic_sds_remote_device_get_port(sci_dev), + sci_dev, request); + if (status != SCI_SUCCESS) + return status; + + scic_sds_remote_device_decrement_request_count(sci_dev); + + if (scic_sds_remote_device_get_request_count(sci_dev) == 0) + scic_sds_remote_node_context_destruct(&sci_dev->rnc, + scic_sds_cb_remote_device_rnc_destruct_complete, + sci_dev); + return SCI_SUCCESS; +} + +/** + * + * @device: The struct scic_sds_remote_device which is to be cast into a + * struct scic_sds_remote_device object. + * + * This method will complete the reset operation when the device is in the + * resetting state. enum sci_status + */ +static enum sci_status scic_sds_remote_device_resetting_state_reset_complete_handler( + struct scic_sds_remote_device *sci_dev) +{ + + sci_base_state_machine_change_state( + &sci_dev->state_machine, + SCI_BASE_REMOTE_DEVICE_STATE_READY + ); + + return SCI_SUCCESS; +} + +/** + * + * @device: The struct scic_sds_remote_device which is to be cast into a + * struct scic_sds_remote_device object. + * + * This method will stop the remote device while in the resetting state. + * enum sci_status + */ +static enum sci_status scic_sds_remote_device_resetting_state_stop_handler( + struct scic_sds_remote_device *sci_dev) +{ + sci_base_state_machine_change_state( + &sci_dev->state_machine, + SCI_BASE_REMOTE_DEVICE_STATE_STOPPING + ); + + return SCI_SUCCESS; +} + +/* + * This method completes requests for this struct scic_sds_remote_device while it is + * in the SCI_BASE_REMOTE_DEVICE_STATE_RESETTING state. This method calls the + * complete method for the request object and if that is successful the port + * object is called to complete the task request. Then the device object itself + * completes the task request. enum sci_status + */ +static enum sci_status scic_sds_remote_device_resetting_state_complete_request_handler( + struct scic_sds_remote_device *sci_dev, + struct scic_sds_request *request) +{ + enum sci_status status = SCI_SUCCESS; + + status = scic_sds_request_complete(request); + + if (status == SCI_SUCCESS) { + status = scic_sds_port_complete_io( + scic_sds_remote_device_get_port(sci_dev), + sci_dev, request); + + if (status == SCI_SUCCESS) { + scic_sds_remote_device_decrement_request_count(sci_dev); + } + } + + return status; +} + +static const struct scic_sds_remote_device_state_handler scic_sds_remote_device_state_handler_table[] = { + [SCI_BASE_REMOTE_DEVICE_STATE_INITIAL] = { + .start_handler = scic_sds_remote_device_default_start_handler, + .stop_handler = scic_sds_remote_device_default_stop_handler, + .fail_handler = scic_sds_remote_device_default_fail_handler, + .destruct_handler = scic_sds_remote_device_default_destruct_handler, + .reset_handler = scic_sds_remote_device_default_reset_handler, + .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, + .start_io_handler = scic_sds_remote_device_default_start_request_handler, + .complete_io_handler = scic_sds_remote_device_default_complete_request_handler, + .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, + .start_task_handler = scic_sds_remote_device_default_start_request_handler, + .complete_task_handler = scic_sds_remote_device_default_complete_request_handler, + .suspend_handler = scic_sds_remote_device_default_suspend_handler, + .resume_handler = scic_sds_remote_device_default_resume_handler, + .event_handler = scic_sds_remote_device_default_event_handler, + .frame_handler = scic_sds_remote_device_default_frame_handler + }, + [SCI_BASE_REMOTE_DEVICE_STATE_STOPPED] = { + .start_handler = scic_sds_remote_device_stopped_state_start_handler, + .stop_handler = scic_sds_remote_device_stopped_state_stop_handler, + .fail_handler = scic_sds_remote_device_default_fail_handler, + .destruct_handler = scic_sds_remote_device_stopped_state_destruct_handler, + .reset_handler = scic_sds_remote_device_default_reset_handler, + .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, + .start_io_handler = scic_sds_remote_device_default_start_request_handler, + .complete_io_handler = scic_sds_remote_device_default_complete_request_handler, + .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, + .start_task_handler = scic_sds_remote_device_default_start_request_handler, + .complete_task_handler = scic_sds_remote_device_default_complete_request_handler, + .suspend_handler = scic_sds_remote_device_default_suspend_handler, + .resume_handler = scic_sds_remote_device_default_resume_handler, + .event_handler = scic_sds_remote_device_default_event_handler, + .frame_handler = scic_sds_remote_device_default_frame_handler + }, + [SCI_BASE_REMOTE_DEVICE_STATE_STARTING] = { + .start_handler = scic_sds_remote_device_default_start_handler, + .stop_handler = scic_sds_remote_device_starting_state_stop_handler, + .fail_handler = scic_sds_remote_device_default_fail_handler, + .destruct_handler = scic_sds_remote_device_default_destruct_handler, + .reset_handler = scic_sds_remote_device_default_reset_handler, + .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, + .start_io_handler = scic_sds_remote_device_default_start_request_handler, + .complete_io_handler = scic_sds_remote_device_default_complete_request_handler, + .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, + .start_task_handler = scic_sds_remote_device_default_start_request_handler, + .complete_task_handler = scic_sds_remote_device_default_complete_request_handler, + .suspend_handler = scic_sds_remote_device_default_suspend_handler, + .resume_handler = scic_sds_remote_device_default_resume_handler, + .event_handler = scic_sds_remote_device_general_event_handler, + .frame_handler = scic_sds_remote_device_default_frame_handler + }, + [SCI_BASE_REMOTE_DEVICE_STATE_READY] = { + .start_handler = scic_sds_remote_device_default_start_handler, + .stop_handler = scic_sds_remote_device_ready_state_stop_handler, + .fail_handler = scic_sds_remote_device_default_fail_handler, + .destruct_handler = scic_sds_remote_device_default_destruct_handler, + .reset_handler = scic_sds_remote_device_ready_state_reset_handler, + .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, + .start_io_handler = scic_sds_remote_device_ready_state_start_io_handler, + .complete_io_handler = scic_sds_remote_device_ready_state_complete_request_handler, + .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, + .start_task_handler = scic_sds_remote_device_ready_state_start_task_handler, + .complete_task_handler = scic_sds_remote_device_ready_state_complete_request_handler, + .suspend_handler = scic_sds_remote_device_default_suspend_handler, + .resume_handler = scic_sds_remote_device_default_resume_handler, + .event_handler = scic_sds_remote_device_general_event_handler, + .frame_handler = scic_sds_remote_device_general_frame_handler, + }, + [SCI_BASE_REMOTE_DEVICE_STATE_STOPPING] = { + .start_handler = scic_sds_remote_device_default_start_handler, + .stop_handler = scic_sds_remote_device_stopping_state_stop_handler, + .fail_handler = scic_sds_remote_device_default_fail_handler, + .destruct_handler = scic_sds_remote_device_default_destruct_handler, + .reset_handler = scic_sds_remote_device_default_reset_handler, + .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, + .start_io_handler = scic_sds_remote_device_default_start_request_handler, + .complete_io_handler = scic_sds_remote_device_stopping_state_complete_request_handler, + .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, + .start_task_handler = scic_sds_remote_device_default_start_request_handler, + .complete_task_handler = scic_sds_remote_device_stopping_state_complete_request_handler, + .suspend_handler = scic_sds_remote_device_default_suspend_handler, + .resume_handler = scic_sds_remote_device_default_resume_handler, + .event_handler = scic_sds_remote_device_general_event_handler, + .frame_handler = scic_sds_remote_device_general_frame_handler + }, + [SCI_BASE_REMOTE_DEVICE_STATE_FAILED] = { + .start_handler = scic_sds_remote_device_default_start_handler, + .stop_handler = scic_sds_remote_device_default_stop_handler, + .fail_handler = scic_sds_remote_device_default_fail_handler, + .destruct_handler = scic_sds_remote_device_default_destruct_handler, + .reset_handler = scic_sds_remote_device_default_reset_handler, + .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, + .start_io_handler = scic_sds_remote_device_default_start_request_handler, + .complete_io_handler = scic_sds_remote_device_default_complete_request_handler, + .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, + .start_task_handler = scic_sds_remote_device_default_start_request_handler, + .complete_task_handler = scic_sds_remote_device_default_complete_request_handler, + .suspend_handler = scic_sds_remote_device_default_suspend_handler, + .resume_handler = scic_sds_remote_device_default_resume_handler, + .event_handler = scic_sds_remote_device_default_event_handler, + .frame_handler = scic_sds_remote_device_general_frame_handler + }, + [SCI_BASE_REMOTE_DEVICE_STATE_RESETTING] = { + .start_handler = scic_sds_remote_device_default_start_handler, + .stop_handler = scic_sds_remote_device_resetting_state_stop_handler, + .fail_handler = scic_sds_remote_device_default_fail_handler, + .destruct_handler = scic_sds_remote_device_default_destruct_handler, + .reset_handler = scic_sds_remote_device_default_reset_handler, + .reset_complete_handler = scic_sds_remote_device_resetting_state_reset_complete_handler, + .start_io_handler = scic_sds_remote_device_default_start_request_handler, + .complete_io_handler = scic_sds_remote_device_resetting_state_complete_request_handler, + .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, + .start_task_handler = scic_sds_remote_device_default_start_request_handler, + .complete_task_handler = scic_sds_remote_device_resetting_state_complete_request_handler, + .suspend_handler = scic_sds_remote_device_default_suspend_handler, + .resume_handler = scic_sds_remote_device_default_resume_handler, + .event_handler = scic_sds_remote_device_default_event_handler, + .frame_handler = scic_sds_remote_device_general_frame_handler + }, + [SCI_BASE_REMOTE_DEVICE_STATE_FINAL] = { + .start_handler = scic_sds_remote_device_default_start_handler, + .stop_handler = scic_sds_remote_device_default_stop_handler, + .fail_handler = scic_sds_remote_device_default_fail_handler, + .destruct_handler = scic_sds_remote_device_default_destruct_handler, + .reset_handler = scic_sds_remote_device_default_reset_handler, + .reset_complete_handler = scic_sds_remote_device_default_reset_complete_handler, + .start_io_handler = scic_sds_remote_device_default_start_request_handler, + .complete_io_handler = scic_sds_remote_device_default_complete_request_handler, + .continue_io_handler = scic_sds_remote_device_default_continue_request_handler, + .start_task_handler = scic_sds_remote_device_default_start_request_handler, + .complete_task_handler = scic_sds_remote_device_default_complete_request_handler, + .suspend_handler = scic_sds_remote_device_default_suspend_handler, + .resume_handler = scic_sds_remote_device_default_resume_handler, + .event_handler = scic_sds_remote_device_default_event_handler, + .frame_handler = scic_sds_remote_device_default_frame_handler + } +}; + +static void scic_sds_remote_device_initial_state_enter( + struct sci_base_object *object) +{ + struct scic_sds_remote_device *sci_dev = (struct scic_sds_remote_device *)object; + + sci_dev = container_of(object, typeof(*sci_dev), parent); + SET_STATE_HANDLER(sci_dev, scic_sds_remote_device_state_handler_table, + SCI_BASE_REMOTE_DEVICE_STATE_INITIAL); + + /* Initial state is a transitional state to the stopped state */ + sci_base_state_machine_change_state(&sci_dev->state_machine, + SCI_BASE_REMOTE_DEVICE_STATE_STOPPED); +} + +/** + * isci_remote_device_change_state() - This function gets the status of the + * remote_device object. + * @isci_device: This parameter points to the isci_remote_device object + * + * status of the object as a isci_status enum. + */ +void isci_remote_device_change_state( + struct isci_remote_device *isci_device, + enum isci_status status) +{ + unsigned long flags; + + spin_lock_irqsave(&isci_device->state_lock, flags); + isci_device->status = status; + spin_unlock_irqrestore(&isci_device->state_lock, flags); +} + +/** + * scic_remote_device_destruct() - free remote node context and destruct + * @remote_device: This parameter specifies the remote device to be destructed. + * + * Remote device objects are a limited resource. As such, they must be + * protected. Thus calls to construct and destruct are mutually exclusive and + * non-reentrant. The return value shall indicate if the device was + * successfully destructed or if some failure occurred. enum sci_status This value + * is returned if the device is successfully destructed. + * SCI_FAILURE_INVALID_REMOTE_DEVICE This value is returned if the supplied + * device isn't valid (e.g. it's already been destoryed, the handle isn't + * valid, etc.). + */ +static enum sci_status scic_remote_device_destruct(struct scic_sds_remote_device *sci_dev) +{ + return sci_dev->state_handlers->destruct_handler(sci_dev); +} /** * isci_remote_device_deconstruct() - This function frees an isci_remote_device. @@ -98,6 +1249,418 @@ static void isci_remote_device_deconstruct(struct isci_host *ihost, struct isci_ wake_up(&ihost->eventq); } +/** + * isci_remote_device_stop_complete() - This function is called by the scic + * when the remote device stop has completed. We mark the isci device as not + * ready and remove the isci remote device. + * @ihost: This parameter specifies the isci host object. + * @idev: This parameter specifies the remote device. + * @status: This parameter specifies status of the completion. + * + */ +static void isci_remote_device_stop_complete(struct isci_host *ihost, + struct isci_remote_device *idev) +{ + dev_dbg(&ihost->pdev->dev, "%s: complete idev = %p\n", __func__, idev); + + isci_remote_device_change_state(idev, isci_stopped); + + /* after stop, we can tear down resources. */ + isci_remote_device_deconstruct(ihost, idev); +} + +static void scic_sds_remote_device_stopped_state_enter( + struct sci_base_object *object) +{ + struct scic_sds_remote_device *sci_dev; + struct scic_sds_controller *scic; + struct isci_remote_device *idev; + struct isci_host *ihost; + u32 prev_state; + + sci_dev = container_of(object, typeof(*sci_dev), parent); + scic = scic_sds_remote_device_get_controller(sci_dev); + ihost = sci_object_get_association(scic); + idev = sci_object_get_association(sci_dev); + + SET_STATE_HANDLER(sci_dev, scic_sds_remote_device_state_handler_table, + SCI_BASE_REMOTE_DEVICE_STATE_STOPPED); + + /* If we are entering from the stopping state let the SCI User know that + * the stop operation has completed. + */ + prev_state = sci_dev->state_machine.previous_state_id; + if (prev_state == SCI_BASE_REMOTE_DEVICE_STATE_STOPPING) + isci_remote_device_stop_complete(ihost, idev); + + scic_sds_controller_remote_device_stopped(scic, sci_dev); +} + +static void scic_sds_remote_device_starting_state_enter(struct sci_base_object *object) +{ + struct scic_sds_remote_device *sci_dev = container_of(object, typeof(*sci_dev), + parent); + struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev); + struct isci_host *ihost = sci_object_get_association(scic); + struct isci_remote_device *idev = sci_object_get_association(sci_dev); + + SET_STATE_HANDLER(sci_dev, scic_sds_remote_device_state_handler_table, + SCI_BASE_REMOTE_DEVICE_STATE_STARTING); + + isci_remote_device_not_ready(ihost, idev, + SCIC_REMOTE_DEVICE_NOT_READY_START_REQUESTED); +} + +static void scic_sds_remote_device_ready_state_enter(struct sci_base_object *object) +{ + struct scic_sds_remote_device *sci_dev = container_of(object, typeof(*sci_dev), + parent); + struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev); + struct isci_host *ihost = sci_object_get_association(scic); + struct isci_remote_device *idev = sci_object_get_association(sci_dev); + + SET_STATE_HANDLER(sci_dev, + scic_sds_remote_device_state_handler_table, + SCI_BASE_REMOTE_DEVICE_STATE_READY); + + scic->remote_device_sequence[sci_dev->rnc.remote_node_index]++; + + if (sci_dev->has_ready_substate_machine) + sci_base_state_machine_start(&sci_dev->ready_substate_machine); + else + isci_remote_device_ready(ihost, idev); +} + +static void scic_sds_remote_device_ready_state_exit( + struct sci_base_object *object) +{ + struct scic_sds_remote_device *sci_dev = container_of(object, typeof(*sci_dev), + parent); + if (sci_dev->has_ready_substate_machine) + sci_base_state_machine_stop(&sci_dev->ready_substate_machine); + else { + struct scic_sds_controller *scic = scic_sds_remote_device_get_controller(sci_dev); + struct isci_host *ihost = sci_object_get_association(scic); + struct isci_remote_device *idev = sci_object_get_association(sci_dev); + + isci_remote_device_not_ready(ihost, idev, + SCIC_REMOTE_DEVICE_NOT_READY_STOP_REQUESTED); + } +} + +static void scic_sds_remote_device_stopping_state_enter( + struct sci_base_object *object) +{ + struct scic_sds_remote_device *sci_dev = (struct scic_sds_remote_device *)object; + + SET_STATE_HANDLER( + sci_dev, + scic_sds_remote_device_state_handler_table, + SCI_BASE_REMOTE_DEVICE_STATE_STOPPING + ); +} + +static void scic_sds_remote_device_failed_state_enter( + struct sci_base_object *object) +{ + struct scic_sds_remote_device *sci_dev = (struct scic_sds_remote_device *)object; + + SET_STATE_HANDLER( + sci_dev, + scic_sds_remote_device_state_handler_table, + SCI_BASE_REMOTE_DEVICE_STATE_FAILED + ); +} + +static void scic_sds_remote_device_resetting_state_enter( + struct sci_base_object *object) +{ + struct scic_sds_remote_device *sci_dev = (struct scic_sds_remote_device *)object; + + SET_STATE_HANDLER( + sci_dev, + scic_sds_remote_device_state_handler_table, + SCI_BASE_REMOTE_DEVICE_STATE_RESETTING + ); + + scic_sds_remote_node_context_suspend( + &sci_dev->rnc, SCI_SOFTWARE_SUSPENSION, NULL, NULL); +} + +static void scic_sds_remote_device_resetting_state_exit( + struct sci_base_object *object) +{ + struct scic_sds_remote_device *sci_dev = (struct scic_sds_remote_device *)object; + + scic_sds_remote_node_context_resume(&sci_dev->rnc, NULL, NULL); +} + +static void scic_sds_remote_device_final_state_enter( + struct sci_base_object *object) +{ + struct scic_sds_remote_device *sci_dev = (struct scic_sds_remote_device *)object; + + SET_STATE_HANDLER( + sci_dev, + scic_sds_remote_device_state_handler_table, + SCI_BASE_REMOTE_DEVICE_STATE_FINAL + ); +} + + +static const struct sci_base_state scic_sds_remote_device_state_table[] = { + [SCI_BASE_REMOTE_DEVICE_STATE_INITIAL] = { + .enter_state = scic_sds_remote_device_initial_state_enter, + }, + [SCI_BASE_REMOTE_DEVICE_STATE_STOPPED] = { + .enter_state = scic_sds_remote_device_stopped_state_enter, + }, + [SCI_BASE_REMOTE_DEVICE_STATE_STARTING] = { + .enter_state = scic_sds_remote_device_starting_state_enter, + }, + [SCI_BASE_REMOTE_DEVICE_STATE_READY] = { + .enter_state = scic_sds_remote_device_ready_state_enter, + .exit_state = scic_sds_remote_device_ready_state_exit + }, + [SCI_BASE_REMOTE_DEVICE_STATE_STOPPING] = { + .enter_state = scic_sds_remote_device_stopping_state_enter, + }, + [SCI_BASE_REMOTE_DEVICE_STATE_FAILED] = { + .enter_state = scic_sds_remote_device_failed_state_enter, + }, + [SCI_BASE_REMOTE_DEVICE_STATE_RESETTING] = { + .enter_state = scic_sds_remote_device_resetting_state_enter, + .exit_state = scic_sds_remote_device_resetting_state_exit + }, + [SCI_BASE_REMOTE_DEVICE_STATE_FINAL] = { + .enter_state = scic_sds_remote_device_final_state_enter, + }, +}; + +/** + * scic_remote_device_construct() - This method will perform the construction + * common to all remote device objects. + * @sci_port: SAS/SATA port through which this device is accessed. + * @sci_dev: remote device to construct + * + * It isn't necessary to call scic_remote_device_destruct() for device objects + * that have only called this method for construction. Once subsequent + * construction methods have been invoked (e.g. + * scic_remote_device_da_construct()), then destruction should occur. none + */ +static void scic_remote_device_construct(struct scic_sds_port *sci_port, + struct scic_sds_remote_device *sci_dev) +{ + sci_dev->owning_port = sci_port; + sci_dev->started_request_count = 0; + sci_dev->parent.private = NULL; + + sci_base_state_machine_construct( + &sci_dev->state_machine, + &sci_dev->parent, + scic_sds_remote_device_state_table, + SCI_BASE_REMOTE_DEVICE_STATE_INITIAL + ); + + sci_base_state_machine_start( + &sci_dev->state_machine + ); + + scic_sds_remote_node_context_construct(&sci_dev->rnc, + SCIC_SDS_REMOTE_NODE_CONTEXT_INVALID_INDEX); + + sci_object_set_association(&sci_dev->rnc, sci_dev); +} + +/** + * scic_remote_device_da_construct() - This method will construct a + * SCIC_REMOTE_DEVICE object for a direct attached (da) device. The + * information (e.g. IAF, Signature FIS, etc.) necessary to build the device + * is known to the SCI Core since it is contained in the scic_phy object. + * @remote_device: This parameter specifies the remote device to be destructed. + * + * The user must have previously called scic_remote_device_construct() Remote + * device objects are a limited resource. As such, they must be protected. + * Thus calls to construct and destruct are mutually exclusive and + * non-reentrant. Indicate if the remote device was successfully constructed. + * SCI_SUCCESS Returned if the device was successfully constructed. + * SCI_FAILURE_DEVICE_EXISTS Returned if the device has already been + * constructed. If it's an additional phy for the target, then call + * scic_remote_device_da_add_phy(). SCI_FAILURE_UNSUPPORTED_PROTOCOL Returned + * if the supplied parameters necessitate creation of a remote device for which + * the protocol is not supported by the underlying controller hardware. + * SCI_FAILURE_INSUFFICIENT_RESOURCES This value is returned if the core + * controller associated with the supplied parameters is unable to support + * additional remote devices. + */ +static enum sci_status scic_remote_device_da_construct(struct scic_sds_remote_device *sci_dev) +{ + enum sci_status status; + u16 remote_node_index; + struct sci_sas_identify_address_frame_protocols protocols; + + /* + * This information is request to determine how many remote node context + * entries will be needed to store the remote node. + */ + scic_sds_port_get_attached_protocols(sci_dev->owning_port, &protocols); + sci_dev->target_protocols.u.all = protocols.u.all; + sci_dev->is_direct_attached = true; +#if !defined(DISABLE_ATAPI) + sci_dev->is_atapi = scic_sds_remote_device_is_atapi(sci_dev); +#endif + + status = scic_sds_controller_allocate_remote_node_context( + sci_dev->owning_port->owning_controller, + sci_dev, + &remote_node_index); + + if (status == SCI_SUCCESS) { + sci_dev->rnc.remote_node_index = remote_node_index; + + scic_sds_port_get_attached_sas_address( + sci_dev->owning_port, &sci_dev->device_address); + + if (sci_dev->target_protocols.u.bits.attached_ssp_target) { + sci_dev->has_ready_substate_machine = false; + } else if (sci_dev->target_protocols.u.bits.attached_stp_target) { + sci_dev->has_ready_substate_machine = true; + + sci_base_state_machine_construct( + &sci_dev->ready_substate_machine, + &sci_dev->parent, + scic_sds_stp_remote_device_ready_substate_table, + SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE); + } else if (sci_dev->target_protocols.u.bits.attached_smp_target) { + sci_dev->has_ready_substate_machine = true; + + /* add the SMP ready substate machine construction here */ + sci_base_state_machine_construct( + &sci_dev->ready_substate_machine, + &sci_dev->parent, + scic_sds_smp_remote_device_ready_substate_table, + SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE); + } + + sci_dev->connection_rate = scic_sds_port_get_max_allowed_speed( + sci_dev->owning_port); + + /* / @todo Should I assign the port width by reading all of the phys on the port? */ + sci_dev->device_port_width = 1; + } + + return status; +} + +static void scic_sds_remote_device_get_info_from_smp_discover_response( + struct scic_sds_remote_device *sci_dev, + struct smp_response_discover *discover_response) +{ + /* decode discover_response to set sas_address to sci_dev. */ + sci_dev->device_address.high = + discover_response->attached_sas_address.high; + + sci_dev->device_address.low = + discover_response->attached_sas_address.low; + + sci_dev->target_protocols.u.all = discover_response->protocols.u.all; +} + +/** + * scic_remote_device_ea_construct() - This method will construct an + * SCIC_REMOTE_DEVICE object for an expander attached (ea) device from an + * SMP Discover Response. + * @remote_device: This parameter specifies the remote device to be destructed. + * @discover_response: This parameter specifies the SMP Discovery Response to + * be used in device creation. + * + * The user must have previously called scic_remote_device_construct() Remote + * device objects are a limited resource. As such, they must be protected. + * Thus calls to construct and destruct are mutually exclusive and + * non-reentrant. Indicate if the remote device was successfully constructed. + * SCI_SUCCESS Returned if the device was successfully constructed. + * SCI_FAILURE_DEVICE_EXISTS Returned if the device has already been + * constructed. If it's an additional phy for the target, then call + * scic_ea_remote_device_add_phy(). SCI_FAILURE_UNSUPPORTED_PROTOCOL Returned + * if the supplied parameters necessitate creation of a remote device for which + * the protocol is not supported by the underlying controller hardware. + * SCI_FAILURE_INSUFFICIENT_RESOURCES This value is returned if the core + * controller associated with the supplied parameters is unable to support + * additional remote devices. + */ +static enum sci_status scic_remote_device_ea_construct(struct scic_sds_remote_device *sci_dev, + struct smp_response_discover *discover_response) +{ + enum sci_status status; + struct scic_sds_controller *scic; + + scic = scic_sds_port_get_controller(sci_dev->owning_port); + + scic_sds_remote_device_get_info_from_smp_discover_response( + sci_dev, discover_response); + + status = scic_sds_controller_allocate_remote_node_context( + scic, sci_dev, &sci_dev->rnc.remote_node_index); + + if (status == SCI_SUCCESS) { + if (sci_dev->target_protocols.u.bits.attached_ssp_target) { + sci_dev->has_ready_substate_machine = false; + } else if (sci_dev->target_protocols.u.bits.attached_smp_target) { + sci_dev->has_ready_substate_machine = true; + + /* add the SMP ready substate machine construction here */ + sci_base_state_machine_construct( + &sci_dev->ready_substate_machine, + &sci_dev->parent, + scic_sds_smp_remote_device_ready_substate_table, + SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE); + } else if (sci_dev->target_protocols.u.bits.attached_stp_target) { + sci_dev->has_ready_substate_machine = true; + + sci_base_state_machine_construct( + &sci_dev->ready_substate_machine, + &sci_dev->parent, + scic_sds_stp_remote_device_ready_substate_table, + SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE); + } + + /* + * For SAS-2 the physical link rate is actually a logical link + * rate that incorporates multiplexing. The SCU doesn't + * incorporate multiplexing and for the purposes of the + * connection the logical link rate is that same as the + * physical. Furthermore, the SAS-2 and SAS-1.1 fields overlay + * one another, so this code works for both situations. */ + sci_dev->connection_rate = min_t(u16, + scic_sds_port_get_max_allowed_speed(sci_dev->owning_port), + discover_response->u2.sas1_1.negotiated_physical_link_rate + ); + + /* / @todo Should I assign the port width by reading all of the phys on the port? */ + sci_dev->device_port_width = 1; + } + + return status; +} + +/** + * scic_remote_device_start() - This method will start the supplied remote + * device. This method enables normal IO requests to flow through to the + * remote device. + * @remote_device: This parameter specifies the device to be started. + * @timeout: This parameter specifies the number of milliseconds in which the + * start operation should complete. + * + * An indication of whether the device was successfully started. SCI_SUCCESS + * This value is returned if the device was successfully started. + * SCI_FAILURE_INVALID_PHY This value is returned if the user attempts to start + * the device when there have been no phys added to it. + */ +static enum sci_status scic_remote_device_start(struct scic_sds_remote_device *sci_dev, + u32 timeout) +{ + return sci_dev->state_handlers->start_handler(sci_dev); +} /** * isci_remote_device_construct() - This function calls the scic remote device @@ -307,51 +1870,6 @@ void isci_remote_device_not_ready(struct isci_host *ihost, } /** - * isci_remote_device_stop_complete() - This function is called by the scic - * when the remote device stop has completed. We mark the isci device as not - * ready and remove the isci remote device. - * @isci_host: This parameter specifies the isci host object. - * @isci_device: This parameter specifies the remote device. - * @status: This parameter specifies status of the completion. - * - */ -void isci_remote_device_stop_complete( - struct isci_host *isci_host, - struct isci_remote_device *isci_device, - enum sci_status status) -{ - dev_dbg(&isci_host->pdev->dev, - "%s: complete isci_device = %p, status = 0x%x\n", - __func__, - isci_device, - status); - - isci_remote_device_change_state(isci_device, isci_stopped); - - /* after stop, we can tear down resources. */ - isci_remote_device_deconstruct(isci_host, isci_device); - -} - -/** - * isci_remote_device_start_complete() - This function is called by the scic - * when the remote device start has completed - * @isci_host: This parameter specifies the isci host object. - * @isci_device: This parameter specifies the remote device. - * @status: This parameter specifies status of the completion. - * - */ -void isci_remote_device_start_complete( - struct isci_host *isci_host, - struct isci_remote_device *isci_device, - enum sci_status status) -{ - - -} - - -/** * isci_remote_device_stop() - This function is called internally to stop the * remote device. * @isci_host: This parameter specifies the isci host object. @@ -572,21 +2090,3 @@ void isci_device_clear_reset_pending(struct isci_host *ihost, struct isci_remote } spin_unlock_irqrestore(&ihost->scic_lock, flags); } - -/** - * isci_remote_device_change_state() - This function gets the status of the - * remote_device object. - * @isci_device: This parameter points to the isci_remote_device object - * - * status of the object as a isci_status enum. - */ -void isci_remote_device_change_state( - struct isci_remote_device *isci_device, - enum isci_status status) -{ - unsigned long flags; - - spin_lock_irqsave(&isci_device->state_lock, flags); - isci_device->status = status; - spin_unlock_irqrestore(&isci_device->state_lock, flags); -} diff --git a/drivers/scsi/isci/remote_device.h b/drivers/scsi/isci/remote_device.h index aeda395..9d8fcbf 100644 --- a/drivers/scsi/isci/remote_device.h +++ b/drivers/scsi/isci/remote_device.h @@ -53,11 +53,127 @@ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -#if !defined(_ISCI_REMOTE_DEVICE_H_) +#ifndef _ISCI_REMOTE_DEVICE_H_ #define _ISCI_REMOTE_DEVICE_H_ -#include "scic_sds_remote_device.h" +#include <scsi/libsas.h> +#include "sci_status.h" +#include "intel_sas.h" +#include "scu_remote_node_context.h" +#include "remote_node_context.h" +#include "port.h" -struct isci_host; +enum scic_remote_device_not_ready_reason_code { + SCIC_REMOTE_DEVICE_NOT_READY_START_REQUESTED, + SCIC_REMOTE_DEVICE_NOT_READY_STOP_REQUESTED, + SCIC_REMOTE_DEVICE_NOT_READY_SATA_REQUEST_STARTED, + SCIC_REMOTE_DEVICE_NOT_READY_SATA_SDB_ERROR_FIS_RECEIVED, + SCIC_REMOTE_DEVICE_NOT_READY_SMP_REQUEST_STARTED, + + SCIC_REMOTE_DEVICE_NOT_READY_REASON_CODE_MAX + +}; + +struct scic_sds_remote_device { + /** + * The field specifies that the parent object for the base remote + * device is the base object itself. + */ + struct sci_base_object parent; + + /** + * This field contains the information for the base remote device state + * machine. + */ + struct sci_base_state_machine state_machine; + + /** + * This field is the programmed device port width. This value is + * written to the RCN data structure to tell the SCU how many open + * connections this device can have. + */ + u32 device_port_width; + + /** + * This field is the programmed connection rate for this remote device. It is + * used to program the TC with the maximum allowed connection rate. + */ + enum sas_linkrate connection_rate; + + /** + * This field contains the allowed target protocols for this remote device. + */ + struct smp_discover_response_protocols target_protocols; + + /** + * This field contains the device SAS address. + */ + struct sci_sas_address device_address; + + /** + * This filed is assinged the value of true if the device is directly + * attached to the port. + */ + bool is_direct_attached; + +#if !defined(DISABLE_ATAPI) + /** + * This filed is assinged the value of true if the device is an ATAPI + * device. + */ + bool is_atapi; +#endif + + /** + * This filed contains a pointer back to the port to which this device + * is assigned. + */ + struct scic_sds_port *owning_port; + + /** + * This field contains the SCU silicon remote node context specific + * information. + */ + struct scic_sds_remote_node_context rnc; + + /** + * This field contains the stated request count for the remote device. The + * device can not reach the SCI_BASE_REMOTE_DEVICE_STATE_STOPPED until all + * requests are complete and the rnc_posted value is false. + */ + u32 started_request_count; + + /** + * This field contains a pointer to the working request object. It is only + * used only for SATA requests since the unsolicited frames we get from the + * hardware have no Tag value to look up the io request object. + */ + struct scic_sds_request *working_request; + + /** + * This field contains the reason for the remote device going not_ready. It is + * assigned in the state handlers and used in the state transition. + */ + u32 not_ready_reason; + + /** + * This field is true if this remote device has an initialzied ready substate + * machine. SSP devices do not have a ready substate machine and STP devices + * have a ready substate machine. + */ + bool has_ready_substate_machine; + + /** + * This field contains the state machine for the ready substate machine for + * this struct scic_sds_remote_device object. + */ + struct sci_base_state_machine ready_substate_machine; + + /** + * This field maintains the set of state handlers for the remote device + * object. These are changed each time the remote device enters a new state. + */ + const struct scic_sds_remote_device_state_handler *state_handlers; +}; struct isci_remote_device { enum isci_status status; @@ -75,12 +191,6 @@ struct isci_remote_device { #define ISCI_REMOTE_DEVICE_START_TIMEOUT 5000 -void isci_remote_device_start_complete(struct isci_host *ihost, - struct isci_remote_device *idev, - enum sci_status); -void isci_remote_device_stop_complete(struct isci_host *ihost, - struct isci_remote_device *idev, - enum sci_status); enum sci_status isci_remote_device_stop(struct isci_host *ihost, struct isci_remote_device *idev); void isci_remote_device_nuke_requests(struct isci_host *ihost, @@ -97,5 +207,619 @@ void isci_device_clear_reset_pending(struct isci_host *ihost, struct isci_remote_device *idev); void isci_remote_device_change_state(struct isci_remote_device *idev, enum isci_status status); +/** + * scic_remote_device_stop() - This method will stop both transmission and + * reception of link activity for the supplied remote device. This method + * disables normal IO requests from flowing through to the remote device. + * @remote_device: This parameter specifies the device to be stopped. + * @timeout: This parameter specifies the number of milliseconds in which the + * stop operation should complete. + * + * An indication of whether the device was successfully stopped. SCI_SUCCESS + * This value is returned if the transmission and reception for the device was + * successfully stopped. + */ +enum sci_status scic_remote_device_stop( + struct scic_sds_remote_device *remote_device, + u32 timeout); + +/** + * scic_remote_device_reset() - This method will reset the device making it + * ready for operation. This method must be called anytime the device is + * reset either through a SMP phy control or a port hard reset request. + * @remote_device: This parameter specifies the device to be reset. + * + * This method does not actually cause the device hardware to be reset. This + * method resets the software object so that it will be operational after a + * device hardware reset completes. An indication of whether the device reset + * was accepted. SCI_SUCCESS This value is returned if the device reset is + * started. + */ +enum sci_status scic_remote_device_reset( + struct scic_sds_remote_device *remote_device); + +/** + * scic_remote_device_reset_complete() - This method informs the device object + * that the reset operation is complete and the device can resume operation + * again. + * @remote_device: This parameter specifies the device which is to be informed + * of the reset complete operation. + * + * An indication that the device is resuming operation. SCI_SUCCESS the device + * is resuming operation. + */ +enum sci_status scic_remote_device_reset_complete( + struct scic_sds_remote_device *remote_device); + + + +/** + * scic_remote_device_get_connection_rate() - This method simply returns the + * link rate at which communications to the remote device occur. + * @remote_device: This parameter specifies the device for which to get the + * connection rate. + * + * Return the link rate at which we transfer for the supplied remote device. + */ +enum sas_linkrate scic_remote_device_get_connection_rate( + struct scic_sds_remote_device *remote_device); + +/** + * scic_remote_device_get_protocols() - This method will indicate which + * protocols are supported by this remote device. + * @remote_device: This parameter specifies the device for which to return the + * protocol. + * @protocols: This parameter specifies the output values, from the remote + * device object, which indicate the protocols supported by the supplied + * remote_device. + * + * The type of protocols supported by this device. The values are returned as + * part of a bit mask in order to allow for multi-protocol support. + */ +void scic_remote_device_get_protocols( + struct scic_sds_remote_device *remote_device, + struct smp_discover_response_protocols *protocols); + + +#if !defined(DISABLE_ATAPI) +/** + * scic_remote_device_is_atapi() - + * @this_device: The device whose type is to be decided. + * + * This method first decide whether a device is a stp target, then decode the + * signature fis of a DA STP device to tell whether it is a standard end disk + * or an ATAPI device. bool Indicate a device is ATAPI device or not. + */ +bool scic_remote_device_is_atapi( + struct scic_sds_remote_device *device_handle); +#else /* !defined(DISABLE_ATAPI) */ +#define scic_remote_device_is_atapi(device_handle) false +#endif /* !defined(DISABLE_ATAPI) */ + + + +/** + * enum scic_sds_remote_device_states - This enumeration depicts all the states + * for the common remote device state machine. + * + * + */ +enum scic_sds_remote_device_states { + /** + * Simply the initial state for the base remote device state machine. + */ + SCI_BASE_REMOTE_DEVICE_STATE_INITIAL, + + /** + * This state indicates that the remote device has successfully been + * stopped. In this state no new IO operations are permitted. + * This state is entered from the INITIAL state. + * This state is entered from the STOPPING state. + */ + SCI_BASE_REMOTE_DEVICE_STATE_STOPPED, + + /** + * This state indicates the the remote device is in the process of + * becoming ready (i.e. starting). In this state no new IO operations + * are permitted. + * This state is entered from the STOPPED state. + */ + SCI_BASE_REMOTE_DEVICE_STATE_STARTING, + + /** + * This state indicates the remote device is now ready. Thus, the user + * is able to perform IO operations on the remote device. + * This state is entered from the STARTING state. + */ + SCI_BASE_REMOTE_DEVICE_STATE_READY, + + /** + * This state indicates that the remote device is in the process of + * stopping. In this state no new IO operations are permitted, but + * existing IO operations are allowed to complete. + * This state is entered from the READY state. + * This state is entered from the FAILED state. + */ + SCI_BASE_REMOTE_DEVICE_STATE_STOPPING, + + /** + * This state indicates that the remote device has failed. + * In this state no new IO operations are permitted. + * This state is entered from the INITIALIZING state. + * This state is entered from the READY state. + */ + SCI_BASE_REMOTE_DEVICE_STATE_FAILED, + + /** + * This state indicates the device is being reset. + * In this state no new IO operations are permitted. + * This state is entered from the READY state. + */ + SCI_BASE_REMOTE_DEVICE_STATE_RESETTING, + + /** + * Simply the final state for the base remote device state machine. + */ + SCI_BASE_REMOTE_DEVICE_STATE_FINAL, +}; + +/** + * enum scic_sds_ssp_remote_device_ready_substates - + * + * This is the enumeration of the ready substates for the + * struct scic_sds_remote_device. + */ +enum scic_sds_ssp_remote_device_ready_substates { + /** + * This is the initial state for the remote device ready substate. + */ + SCIC_SDS_SSP_REMOTE_DEVICE_READY_SUBSTATE_INITIAL, + + /** + * This is the ready operational substate for the remote device. + * This is the normal operational state for a remote device. + */ + SCIC_SDS_SSP_REMOTE_DEVICE_READY_SUBSTATE_OPERATIONAL, + + /** + * This is the suspended state for the remote device. This is the state + * that the device is placed in when a RNC suspend is received by + * the SCU hardware. + */ + SCIC_SDS_SSP_REMOTE_DEVICE_READY_SUBSTATE_SUSPENDED, + + /** + * This is the final state that the device is placed in before a change + * to the base state machine. + */ + SCIC_SDS_SSP_REMOTE_DEVICE_READY_SUBSTATE_FINAL, + + SCIC_SDS_SSP_REMOTE_DEVICE_READY_MAX_SUBSTATES +}; + +/** + * enum scic_sds_stp_remote_device_ready_substates - + * + * This is the enumeration for the struct scic_sds_remote_device ready substates + * for the STP remote device. + */ +enum scic_sds_stp_remote_device_ready_substates { + /** + * This is the idle substate for the stp remote device. When there are no + * active IO for the device it is is in this state. + */ + SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_IDLE, + + /** + * This is the command state for for the STP remote device. This state is + * entered when the device is processing a non-NCQ command. The device object + * will fail any new start IO requests until this command is complete. + */ + SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_CMD, + + /** + * This is the NCQ state for the STP remote device. This state is entered + * when the device is processing an NCQ reuqest. It will remain in this state + * so long as there is one or more NCQ requests being processed. + */ + SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ, + + /** + * This is the NCQ error state for the STP remote device. This state is + * entered when an SDB error FIS is received by the device object while in the + * NCQ state. The device object will only accept a READ LOG command while in + * this state. + */ + SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_NCQ_ERROR, + +#if !defined(DISABLE_ATAPI) + /** + * This is the ATAPI error state for the STP ATAPI remote device. This state is + * entered when ATAPI device sends error status FIS without data while the device + * object is in CMD state. A suspension event is expected in this state. The device + * object will resume right away. + */ + SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_ATAPI_ERROR, +#endif + + /** + * This is the READY substate indicates the device is waiting for the RESET task + * coming to be recovered from certain hardware specific error. + */ + SCIC_SDS_STP_REMOTE_DEVICE_READY_SUBSTATE_AWAIT_RESET, +}; + +/** + * enum scic_sds_smp_remote_device_ready_substates - + * + * This is the enumeration of the ready substates for the SMP REMOTE DEVICE. + */ +enum scic_sds_smp_remote_device_ready_substates { + /** + * This is the ready operational substate for the remote device. This is the + * normal operational state for a remote device. + */ + SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_IDLE, + + /** + * This is the suspended state for the remote device. This is the state that + * the device is placed in when a RNC suspend is received by the SCU hardware. + */ + SCIC_SDS_SMP_REMOTE_DEVICE_READY_SUBSTATE_CMD, +}; + +static inline struct scic_sds_remote_device *rnc_to_dev(struct scic_sds_remote_node_context *rnc) +{ + struct scic_sds_remote_device *sci_dev; + + sci_dev = container_of(rnc, typeof(*sci_dev), rnc); + + return sci_dev; +} + +typedef enum sci_status (*scic_sds_remote_device_request_handler_t)( + struct scic_sds_remote_device *device, + struct scic_sds_request *request); + +typedef enum sci_status (*scic_sds_remote_device_high_priority_request_complete_handler_t)( + struct scic_sds_remote_device *device, + struct scic_sds_request *request, + void *, + enum sci_io_status); + +typedef enum sci_status (*scic_sds_remote_device_handler_t)( + struct scic_sds_remote_device *sci_dev); + +typedef enum sci_status (*scic_sds_remote_device_suspend_handler_t)( + struct scic_sds_remote_device *sci_dev, + u32 suspend_type); + +typedef enum sci_status (*scic_sds_remote_device_resume_handler_t)( + struct scic_sds_remote_device *sci_dev); + +typedef enum sci_status (*scic_sds_remote_device_frame_handler_t)( + struct scic_sds_remote_device *sci_dev, + u32 frame_index); + +typedef enum sci_status (*scic_sds_remote_device_event_handler_t)( + struct scic_sds_remote_device *sci_dev, + u32 event_code); + +typedef void (*scic_sds_remote_device_ready_not_ready_handler_t)( + struct scic_sds_remote_device *sci_dev); + +/** + * struct scic_sds_remote_device_state_handler - This structure conains the + * state handlers that are needed to process requests for the SCU remote + * device objects. + * + * + */ +struct scic_sds_remote_device_state_handler { + /** + * The start_handler specifies the method invoked when a user + * attempts to start a remote device. + */ + scic_sds_remote_device_handler_t start_handler; + + /** + * The stop_handler specifies the method invoked when a user attempts to + * stop a remote device. + */ + scic_sds_remote_device_handler_t stop_handler; + + /** + * The fail_handler specifies the method invoked when a remote device + * failure has occurred. A failure may be due to an inability to + * initialize/configure the device. + */ + scic_sds_remote_device_handler_t fail_handler; + + /** + * The destruct_handler specifies the method invoked when attempting to + * destruct a remote device. + */ + scic_sds_remote_device_handler_t destruct_handler; + + /** + * The reset handler specifies the method invloked when requesting to + * reset a remote device. + */ + scic_sds_remote_device_handler_t reset_handler; + + /** + * The reset complete handler specifies the method invloked when + * reporting that a reset has completed to the remote device. + */ + scic_sds_remote_device_handler_t reset_complete_handler; + + /** + * The start_io_handler specifies the method invoked when a user + * attempts to start an IO request for a remote device. + */ + scic_sds_remote_device_request_handler_t start_io_handler; + + /** + * The complete_io_handler specifies the method invoked when a user + * attempts to complete an IO request for a remote device. + */ + scic_sds_remote_device_request_handler_t complete_io_handler; + + /** + * The continue_io_handler specifies the method invoked when a user + * attempts to continue an IO request for a remote device. + */ + scic_sds_remote_device_request_handler_t continue_io_handler; + + /** + * The start_task_handler specifies the method invoked when a user + * attempts to start a task management request for a remote device. + */ + scic_sds_remote_device_request_handler_t start_task_handler; + + /** + * The complete_task_handler specifies the method invoked when a user + * attempts to complete a task management request for a remote device. + */ + scic_sds_remote_device_request_handler_t complete_task_handler; + + + scic_sds_remote_device_suspend_handler_t suspend_handler; + scic_sds_remote_device_resume_handler_t resume_handler; + scic_sds_remote_device_event_handler_t event_handler; + scic_sds_remote_device_frame_handler_t frame_handler; +}; + +extern const struct sci_base_state scic_sds_ssp_remote_device_ready_substate_table[]; +extern const struct sci_base_state scic_sds_stp_remote_device_ready_substate_table[]; +extern const struct sci_base_state scic_sds_smp_remote_device_ready_substate_table[]; + +/** + * scic_sds_remote_device_increment_request_count() - + * + * This macro incrments the request count for this device + */ +#define scic_sds_remote_device_increment_request_count(sci_dev) \ + ((sci_dev)->started_request_count++) + +/** + * scic_sds_remote_device_decrement_request_count() - + * + * This macro decrements the request count for this device. This count will + * never decrment past 0. + */ +#define scic_sds_remote_device_decrement_request_count(sci_dev) \ + ((sci_dev)->started_request_count > 0 ? \ + (sci_dev)->started_request_count-- : 0) + +/** + * scic_sds_remote_device_get_request_count() - + * + * This is a helper macro to return the current device request count. + */ +#define scic_sds_remote_device_get_request_count(sci_dev) \ + ((sci_dev)->started_request_count) + +/** + * scic_sds_remote_device_get_port() - + * + * This macro returns the owning port of this remote device obejct. + */ +#define scic_sds_remote_device_get_port(sci_dev) \ + ((sci_dev)->owning_port) + +/** + * scic_sds_remote_device_get_controller() - + * + * This macro returns the controller object that contains this device object + */ +#define scic_sds_remote_device_get_controller(sci_dev) \ + scic_sds_port_get_controller(scic_sds_remote_device_get_port(sci_dev)) + +/** + * scic_sds_remote_device_set_state_handlers() - + * + * This macro sets the remote device state handlers pointer and is set on entry + * to each device state. + */ +#define scic_sds_remote_device_set_state_handlers(sci_dev, handlers) \ + ((sci_dev)->state_handlers = (handlers)) + +/** + * scic_sds_remote_device_get_port() - + * + * This macro returns the owning port of this device + */ +#define scic_sds_remote_device_get_port(sci_dev) \ + ((sci_dev)->owning_port) + +/** + * scic_sds_remote_device_get_sequence() - + * + * This macro returns the remote device sequence value + */ +#define scic_sds_remote_device_get_sequence(sci_dev) \ + (\ + scic_sds_remote_device_get_controller(sci_dev)-> \ + remote_device_sequence[(sci_dev)->rnc.remote_node_index] \ + ) + +/** + * scic_sds_remote_device_get_controller_peg() - + * + * This macro returns the controllers protocol engine group + */ +#define scic_sds_remote_device_get_controller_peg(sci_dev) \ + (\ + scic_sds_controller_get_protocol_engine_group(\ + scic_sds_port_get_controller(\ + scic_sds_remote_device_get_port(sci_dev) \ + ) \ + ) \ + ) + +/** + * scic_sds_remote_device_get_port_index() - + * + * This macro returns the port index for the devices owning port + */ +#define scic_sds_remote_device_get_port_index(sci_dev) \ + (scic_sds_port_get_index(scic_sds_remote_device_get_port(sci_dev))) + +/** + * scic_sds_remote_device_get_index() - + * + * This macro returns the remote node index for this device object + */ +#define scic_sds_remote_device_get_index(sci_dev) \ + ((sci_dev)->rnc.remote_node_index) + +/** + * scic_sds_remote_device_build_command_context() - + * + * This macro builds a remote device context for the SCU post request operation + */ +#define scic_sds_remote_device_build_command_context(device, command) \ + ((command) \ + | (scic_sds_remote_device_get_controller_peg((device)) << SCU_CONTEXT_COMMAND_PROTOCOL_ENGINE_GROUP_SHIFT) \ + | (scic_sds_remote_device_get_port_index((device)) << SCU_CONTEXT_COMMAND_LOGICAL_PORT_SHIFT) \ + | (scic_sds_remote_device_get_index((device))) \ + ) + +/** + * scic_sds_remote_device_set_working_request() - + * + * This macro makes the working request assingment for the remote device + * object. To clear the working request use this macro with a NULL request + * object. + */ +#define scic_sds_remote_device_set_working_request(device, request) \ + ((device)->working_request = (request)) + +enum sci_status scic_sds_remote_device_frame_handler( + struct scic_sds_remote_device *sci_dev, + u32 frame_index); + +enum sci_status scic_sds_remote_device_event_handler( + struct scic_sds_remote_device *sci_dev, + u32 event_code); + +enum sci_status scic_sds_remote_device_start_io( + struct scic_sds_controller *controller, + struct scic_sds_remote_device *sci_dev, + struct scic_sds_request *io_request); + +enum sci_status scic_sds_remote_device_complete_io( + struct scic_sds_controller *controller, + struct scic_sds_remote_device *sci_dev, + struct scic_sds_request *io_request); + +enum sci_status scic_sds_remote_device_resume( + struct scic_sds_remote_device *sci_dev); + +enum sci_status scic_sds_remote_device_suspend( + struct scic_sds_remote_device *sci_dev, + u32 suspend_type); + +enum sci_status scic_sds_remote_device_start_task( + struct scic_sds_controller *controller, + struct scic_sds_remote_device *sci_dev, + struct scic_sds_request *io_request); + +void scic_sds_remote_device_post_request( + struct scic_sds_remote_device *sci_dev, + u32 request); + +#if !defined(DISABLE_ATAPI) +bool scic_sds_remote_device_is_atapi( + struct scic_sds_remote_device *sci_dev); +#else /* !defined(DISABLE_ATAPI) */ +#define scic_sds_remote_device_is_atapi(sci_dev) false +#endif /* !defined(DISABLE_ATAPI) */ + +void scic_sds_remote_device_start_request( + struct scic_sds_remote_device *sci_dev, + struct scic_sds_request *sci_req, + enum sci_status status); + +void scic_sds_remote_device_continue_request(void *sci_dev); + +enum sci_status scic_sds_remote_device_default_start_handler( + struct scic_sds_remote_device *sci_dev); + +enum sci_status scic_sds_remote_device_default_fail_handler( + struct scic_sds_remote_device *sci_dev); + +enum sci_status scic_sds_remote_device_default_destruct_handler( + struct scic_sds_remote_device *sci_dev); + +enum sci_status scic_sds_remote_device_default_reset_handler( + struct scic_sds_remote_device *device); + +enum sci_status scic_sds_remote_device_default_reset_complete_handler( + struct scic_sds_remote_device *device); + +enum sci_status scic_sds_remote_device_default_start_request_handler( + struct scic_sds_remote_device *device, + struct scic_sds_request *request); + +enum sci_status scic_sds_remote_device_default_complete_request_handler( + struct scic_sds_remote_device *device, + struct scic_sds_request *request); + +enum sci_status scic_sds_remote_device_default_continue_request_handler( + struct scic_sds_remote_device *device, + struct scic_sds_request *request); + +enum sci_status scic_sds_remote_device_default_suspend_handler( + struct scic_sds_remote_device *sci_dev, + u32 suspend_type); + +enum sci_status scic_sds_remote_device_default_resume_handler( + struct scic_sds_remote_device *sci_dev); + + +enum sci_status scic_sds_remote_device_default_frame_handler( + struct scic_sds_remote_device *sci_dev, + u32 frame_index); + +enum sci_status scic_sds_remote_device_ready_state_stop_handler( + struct scic_sds_remote_device *device); + +enum sci_status scic_sds_remote_device_ready_state_reset_handler( + struct scic_sds_remote_device *device); + +enum sci_status scic_sds_remote_device_general_frame_handler( + struct scic_sds_remote_device *sci_dev, + u32 frame_index); + +enum sci_status scic_sds_remote_device_general_event_handler( + struct scic_sds_remote_device *sci_dev, + u32 event_code); + +enum sci_status scic_sds_ssp_remote_device_ready_suspended_substate_resume_handler( + struct scic_sds_remote_device *sci_dev); + + #endif /* !defined(_ISCI_REMOTE_DEVICE_H_) */ diff --git a/drivers/scsi/isci/core/scic_sds_remote_node_context.c b/drivers/scsi/isci/remote_node_context.c index e1d58f88..bdf0b51 100644 --- a/drivers/scsi/isci/core/scic_sds_remote_node_context.c +++ b/drivers/scsi/isci/remote_node_context.c @@ -54,11 +54,10 @@ */ #include "sci_base_state_machine.h" -#include "scic_remote_device.h" #include "scic_sds_controller.h" #include "scic_sds_port.h" -#include "scic_sds_remote_device.h" -#include "scic_sds_remote_node_context.h" +#include "remote_device.h" +#include "remote_node_context.h" #include "sci_environment.h" #include "sci_util.h" #include "scu_event_codes.h" diff --git a/drivers/scsi/isci/core/scic_sds_remote_node_context.h b/drivers/scsi/isci/remote_node_context.h index b3f2546..b3f2546 100644 --- a/drivers/scsi/isci/core/scic_sds_remote_node_context.h +++ b/drivers/scsi/isci/remote_node_context.h diff --git a/drivers/scsi/isci/core/scic_sds_remote_node_table.c b/drivers/scsi/isci/remote_node_table.c index 77919a2..8886146 100644 --- a/drivers/scsi/isci/core/scic_sds_remote_node_table.c +++ b/drivers/scsi/isci/remote_node_table.c @@ -61,8 +61,8 @@ */ #include "sci_util.h" #include "sci_environment.h" -#include "scic_sds_remote_node_table.h" -#include "scic_sds_remote_node_context.h" +#include "remote_node_table.h" +#include "remote_node_context.h" /** * diff --git a/drivers/scsi/isci/core/scic_sds_remote_node_table.h b/drivers/scsi/isci/remote_node_table.h index 9c02a6c..9c02a6c 100644 --- a/drivers/scsi/isci/core/scic_sds_remote_node_table.h +++ b/drivers/scsi/isci/remote_node_table.h diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c index 8d2125b..ff5c05a 100644 --- a/drivers/scsi/isci/request.c +++ b/drivers/scsi/isci/request.c @@ -54,7 +54,6 @@ */ #include "isci.h" -#include "scic_remote_device.h" #include "scic_io_request.h" #include "scic_task_request.h" #include "scic_port.h" diff --git a/drivers/scsi/isci/sata.c b/drivers/scsi/isci/sata.c index c941d909..53ce0c2 100644 --- a/drivers/scsi/isci/sata.c +++ b/drivers/scsi/isci/sata.c @@ -54,8 +54,7 @@ */ #include "isci.h" -#include "scic_remote_device.h" -#include "scic_sds_remote_device.h" +#include "remote_device.h" #include "scic_io_request.h" #include "scic_task_request.h" #include "task.h" diff --git a/drivers/scsi/isci/core/scu_remote_node_context.h b/drivers/scsi/isci/scu_remote_node_context.h index 33745ad..33745ad 100644 --- a/drivers/scsi/isci/core/scu_remote_node_context.h +++ b/drivers/scsi/isci/scu_remote_node_context.h diff --git a/drivers/scsi/isci/core/scic_sds_smp_remote_device.c b/drivers/scsi/isci/smp_remote_device.c index cd55c0a..718ddaf 100644 --- a/drivers/scsi/isci/core/scic_sds_smp_remote_device.c +++ b/drivers/scsi/isci/smp_remote_device.c @@ -53,10 +53,9 @@ * OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ -#include "scic_remote_device.h" #include "scic_sds_controller.h" #include "scic_sds_port.h" -#include "scic_sds_remote_device.h" +#include "remote_device.h" #include "scic_sds_request.h" #include "sci_environment.h" #include "sci_util.h" diff --git a/drivers/scsi/isci/core/scic_sds_stp_remote_device.c b/drivers/scsi/isci/stp_remote_device.c index 848cb47..b81f21f 100644 --- a/drivers/scsi/isci/core/scic_sds_stp_remote_device.c +++ b/drivers/scsi/isci/stp_remote_device.c @@ -57,10 +57,9 @@ #include "intel_sata.h" #include "intel_sat.h" #include "sci_base_state.h" -#include "scic_remote_device.h" #include "scic_sds_controller.h" #include "scic_sds_port.h" -#include "scic_sds_remote_device.h" +#include "remote_device.h" #include "scic_sds_request.h" #include "sci_environment.h" #include "sci_util.h" diff --git a/drivers/scsi/isci/task.c b/drivers/scsi/isci/task.c index f54f523..e011d66 100644 --- a/drivers/scsi/isci/task.c +++ b/drivers/scsi/isci/task.c @@ -56,10 +56,9 @@ #include <linux/completion.h> #include <linux/irqflags.h> #include "scic_task_request.h" -#include "scic_remote_device.h" #include "scic_io_request.h" -#include "scic_sds_remote_device.h" -#include "scic_sds_remote_node_context.h" +#include "remote_device.h" +#include "remote_node_context.h" #include "isci.h" #include "request.h" #include "sata.h" |