diff options
238 files changed, 12679 insertions, 4211 deletions
diff --git a/Documentation/devicetree/bindings/arm/arm-boards b/Documentation/devicetree/bindings/arm/arm-boards index 5fac246..3509707 100644 --- a/Documentation/devicetree/bindings/arm/arm-boards +++ b/Documentation/devicetree/bindings/arm/arm-boards @@ -14,6 +14,9 @@ Required nodes: - core-module: the root node to the Integrator platforms must have a core-module with regs and the compatible string "arm,core-module-integrator" +- external-bus-interface: the root node to the Integrator platforms + must have an external bus interface with regs and the + compatible-string "arm,external-bus-interface" Required properties for the core module: - regs: the location and size of the core module registers, one @@ -48,6 +51,11 @@ Required nodes: reg = <0x10000000 0x200>; }; + ebi@12000000 { + compatible = "arm,external-bus-interface"; + reg = <0x12000000 0x100>; + }; + syscon { compatible = "arm,integrator-ap-syscon"; reg = <0x11000000 0x100>; diff --git a/Documentation/devicetree/bindings/arm/atmel-aic.txt b/Documentation/devicetree/bindings/arm/atmel-aic.txt index ad03121..2742e9c 100644 --- a/Documentation/devicetree/bindings/arm/atmel-aic.txt +++ b/Documentation/devicetree/bindings/arm/atmel-aic.txt @@ -2,6 +2,7 @@ Required properties: - compatible: Should be "atmel,<chip>-aic" + <chip> can be "at91rm9200" or "sama5d3" - interrupt-controller: Identifies the node as an interrupt controller. - interrupt-parent: For single AIC system, it is an empty property. - #interrupt-cells: The number of cells to define the interrupts. It should be 3. diff --git a/Documentation/devicetree/bindings/arm/atmel-at91.txt b/Documentation/devicetree/bindings/arm/atmel-at91.txt index 78530e6..16f60b4 100644 --- a/Documentation/devicetree/bindings/arm/atmel-at91.txt +++ b/Documentation/devicetree/bindings/arm/atmel-at91.txt @@ -58,7 +58,8 @@ Example: }; RAMC SDRAM/DDR Controller required properties: -- compatible: Should be "atmel,at91sam9260-sdramc", +- compatible: Should be "atmel,at91rm9200-sdramc", + "atmel,at91sam9260-sdramc", "atmel,at91sam9g45-ddramc", - reg: Should contain registers location and length For at91sam9263 and at91sam9g45 you must specify 2 entries. diff --git a/Documentation/devicetree/bindings/arm/moxart.txt b/Documentation/devicetree/bindings/arm/moxart.txt new file mode 100644 index 0000000..11087ed --- /dev/null +++ b/Documentation/devicetree/bindings/arm/moxart.txt @@ -0,0 +1,12 @@ +MOXA ART device tree bindings + +Boards with the MOXA ART SoC shall have the following properties: + +Required root node property: + +compatible = "moxa,moxart"; + +Boards: + +- UC-7112-LX: embedded computer + compatible = "moxa,moxart-uc-7112-lx", "moxa,moxart" diff --git a/Documentation/devicetree/bindings/arm/samsung/sysreg.txt b/Documentation/devicetree/bindings/arm/samsung/sysreg.txt index 5039c0a..0ab3251 100644 --- a/Documentation/devicetree/bindings/arm/samsung/sysreg.txt +++ b/Documentation/devicetree/bindings/arm/samsung/sysreg.txt @@ -1,7 +1,12 @@ SAMSUNG S5P/Exynos SoC series System Registers (SYSREG) Properties: - - name : should be 'sysreg'; - compatible : should contain "samsung,<chip name>-sysreg", "syscon"; For Exynos4 SoC series it should be "samsung,exynos4-sysreg", "syscon"; - reg : offset and length of the register set. + +Example: + syscon@10010000 { + compatible = "samsung,exynos4-sysreg", "syscon"; + reg = <0x10010000 0x400>; + }; diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-div6-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,cpg-div6-clocks.txt new file mode 100644 index 0000000..952e373 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/renesas,cpg-div6-clocks.txt @@ -0,0 +1,28 @@ +* Renesas CPG DIV6 Clock + +The CPG DIV6 clocks are variable factor clocks provided by the Clock Pulse +Generator (CPG). They clock input is divided by a configurable factor from 1 +to 64. + +Required Properties: + + - compatible: Must be one of the following + - "renesas,r8a7790-div6-clock" for R8A7790 (R-Car H2) DIV6 clocks + - "renesas,r8a7791-div6-clock" for R8A7791 (R-Car M2) DIV6 clocks + - "renesas,cpg-div6-clock" for generic DIV6 clocks + - reg: Base address and length of the memory resource used by the DIV6 clock + - clocks: Reference to the parent clock + - #clock-cells: Must be 0 + - clock-output-names: The name of the clock as a free-form string + + +Example +------- + + sd2_clk: sd2_clk@e6150078 { + compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock"; + reg = <0 0xe6150078 0 4>; + clocks = <&pll1_div2_clk>; + #clock-cells = <0>; + clock-output-names = "sd2"; + }; diff --git a/Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt new file mode 100644 index 0000000..a6a352c --- /dev/null +++ b/Documentation/devicetree/bindings/clock/renesas,cpg-mstp-clocks.txt @@ -0,0 +1,51 @@ +* Renesas CPG Module Stop (MSTP) Clocks + +The CPG can gate SoC device clocks. The gates are organized in groups of up to +32 gates. + +This device tree binding describes a single 32 gate clocks group per node. +Clocks are referenced by user nodes by the MSTP node phandle and the clock +index in the group, from 0 to 31. + +Required Properties: + + - compatible: Must be one of the following + - "renesas,r8a7790-mstp-clocks" for R8A7790 (R-Car H2) MSTP gate clocks + - "renesas,r8a7791-mstp-clocks" for R8A7791 (R-Car M2) MSTP gate clocks + - "renesas,cpg-mstp-clock" for generic MSTP gate clocks + - reg: Base address and length of the I/O mapped registers used by the MSTP + clocks. The first register is the clock control register and is mandatory. + The second register is the clock status register and is optional when not + implemented in hardware. + - clocks: Reference to the parent clocks, one per output clock. The parents + must appear in the same order as the output clocks. + - #clock-cells: Must be 1 + - clock-output-names: The name of the clocks as free-form strings + - renesas,indices: Indices of the gate clocks into the group (0 to 31) + +The clocks, clock-output-names and renesas,indices properties contain one +entry per gate clock. The MSTP groups are sparsely populated. Unimplemented +gate clocks must not be declared. + + +Example +------- + + #include <dt-bindings/clock/r8a7790-clock.h> + + mstp3_clks: mstp3_clks@e615013c { + compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>; + clocks = <&cp_clk>, <&mmc1_clk>, <&sd3_clk>, <&sd2_clk>, + <&cpg_clocks R8A7790_CLK_SD1>, <&cpg_clocks R8A7790_CLK_SD0>, + <&mmc0_clk>; + #clock-cells = <1>; + clock-output-names = + "tpu0", "mmcif1", "sdhi3", "sdhi2", + "sdhi1", "sdhi0", "mmcif0"; + renesas,clock-indices = < + R8A7790_CLK_TPU0 R8A7790_CLK_MMCIF1 R8A7790_CLK_SDHI3 + R8A7790_CLK_SDHI2 R8A7790_CLK_SDHI1 R8A7790_CLK_SDHI0 + R8A7790_CLK_MMCIF0 + >; + }; diff --git a/Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt b/Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt new file mode 100644 index 0000000..7b41c2f --- /dev/null +++ b/Documentation/devicetree/bindings/clock/renesas,rcar-gen2-cpg-clocks.txt @@ -0,0 +1,32 @@ +* Renesas R-Car Gen2 Clock Pulse Generator (CPG) + +The CPG generates core clocks for the R-Car Gen2 SoCs. It includes three PLLs +and several fixed ratio dividers. + +Required Properties: + + - compatible: Must be one of + - "renesas,r8a7790-cpg-clocks" for the r8a7790 CPG + - "renesas,r8a7791-cpg-clocks" for the r8a7791 CPG + - "renesas,rcar-gen2-cpg-clocks" for the generic R-Car Gen2 CPG + + - reg: Base address and length of the memory resource used by the CPG + + - clocks: Reference to the parent clock + - #clock-cells: Must be 1 + - clock-output-names: The names of the clocks. Supported clocks are "main", + "pll0", "pll1", "pll3", "lb", "qspi", "sdh", "sd0", "sd1" and "z" + + +Example +------- + + cpg_clocks: cpg_clocks@e6150000 { + compatible = "renesas,r8a7790-cpg-clocks", + "renesas,rcar-gen2-cpg-clocks"; + reg = <0 0xe6150000 0 0x1000>; + clocks = <&extal_clk>; + #clock-cells = <1>; + clock-output-names = "main", "pll0, "pll1", "pll3", + "lb", "qspi", "sdh", "sd0", "sd1", "z"; + }; diff --git a/Documentation/devicetree/bindings/dma/ste-dma40.txt b/Documentation/devicetree/bindings/dma/ste-dma40.txt index a8c21c2..1f5729f 100644 --- a/Documentation/devicetree/bindings/dma/ste-dma40.txt +++ b/Documentation/devicetree/bindings/dma/ste-dma40.txt @@ -50,6 +50,9 @@ Each dmas request consists of 4 cells: 0x00000008: Use fixed channel: Use automatic channel selection when unset Use DMA request line number when set + 0x00000010: Set channel as high priority: + Normal priority when unset + High priority when set Example: diff --git a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt index c67b975..532b1d4 100644 --- a/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt +++ b/Documentation/devicetree/bindings/mmc/exynos-dw-mshc.txt @@ -16,6 +16,8 @@ Required Properties: specific extensions. - "samsung,exynos5250-dw-mshc": for controllers with Samsung Exynos5250 specific extensions. + - "samsung,exynos5420-dw-mshc": for controllers with Samsung Exynos5420 + specific extensions. * samsung,dw-mshc-ciu-div: Specifies the divider value for the card interface unit (ciu) clock. This property is applicable only for Exynos5 SoC's and diff --git a/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.txt b/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.txt index b5a86d2..167d5da 100644 --- a/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.txt +++ b/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.txt @@ -31,38 +31,58 @@ Required properties: 7: .. i: Local Timer Interrupt n -Example 1: In this example, the system uses only the first global timer - interrupt generated by MCT and the remaining three global timer - interrupts are unused. Two local timer interrupts have been - specified. + For MCT block that uses a per-processor interrupt for local timers, such + as ones compatible with "samsung,exynos4412-mct", only one local timer + interrupt might be specified, meaning that all local timers use the same + per processor interrupt. + +Example 1: In this example, the IP contains two local timers, using separate + interrupts, so two local timer interrupts have been specified, + in addition to four global timer interrupts. mct@10050000 { compatible = "samsung,exynos4210-mct"; reg = <0x10050000 0x800>; - interrupts = <0 57 0>, <0 0 0>, <0 0 0>, <0 0 0>, + interrupts = <0 57 0>, <0 69 0>, <0 70 0>, <0 71 0>, <0 42 0>, <0 48 0>; }; -Example 2: In this example, the MCT global and local timer interrupts are - connected to two separate interrupt controllers. Hence, an - interrupt-map is created to map the interrupts to the respective - interrupt controllers. +Example 2: In this example, the timer interrupts are connected to two separate + interrupt controllers. Hence, an interrupt-map is created to map + the interrupts to the respective interrupt controllers. mct@101C0000 { compatible = "samsung,exynos4210-mct"; reg = <0x101C0000 0x800>; - interrupt-controller; - #interrups-cells = <2>; interrupt-parent = <&mct_map>; - interrupts = <0 0>, <1 0>, <2 0>, <3 0>, - <4 0>, <5 0>; + interrupts = <0>, <1>, <2>, <3>, <4>, <5>; mct_map: mct-map { - #interrupt-cells = <2>; + #interrupt-cells = <1>; #address-cells = <0>; #size-cells = <0>; - interrupt-map = <0x0 0 &combiner 23 3>, - <0x4 0 &gic 0 120 0>, - <0x5 0 &gic 0 121 0>; + interrupt-map = <0 &gic 0 57 0>, + <1 &gic 0 69 0>, + <2 &combiner 12 6>, + <3 &combiner 12 7>, + <4 &gic 0 42 0>, + <5 &gic 0 48 0>; }; }; + +Example 3: In this example, the IP contains four local timers, but using + a per-processor interrupt to handle them. Either all the local + timer interrupts can be specified, with the same interrupt specifier + value or just the first one. + + mct@10050000 { + compatible = "samsung,exynos4412-mct"; + reg = <0x10050000 0x800>; + + /* Both ways are possible in this case. Either: */ + interrupts = <0 57 0>, <0 69 0>, <0 70 0>, <0 71 0>, + <0 42 0>; + /* or: */ + interrupts = <0 57 0>, <0 69 0>, <0 70 0>, <0 71 0>, + <0 42 0>, <0 42 0>, <0 42 0>, <0 42 0>; + }; diff --git a/Documentation/devicetree/bindings/usb/keystone-phy.txt b/Documentation/devicetree/bindings/usb/keystone-phy.txt new file mode 100644 index 0000000..f37b3a8 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/keystone-phy.txt @@ -0,0 +1,20 @@ +TI Keystone USB PHY + +Required properties: + - compatible: should be "ti,keystone-usbphy". + - #address-cells, #size-cells : should be '1' if the device has sub-nodes + with 'reg' property. + - reg : Address and length of the usb phy control register set. + +The main purpose of this PHY driver is to enable the USB PHY reference clock +gate on the Keystone SOC for both the USB2 and USB3 PHY. Otherwise it is just +an NOP PHY driver. Hence this node is referenced as both the usb2 and usb3 +phy node in the USB Glue layer driver node. + +usb_phy: usb_phy@2620738 { + compatible = "ti,keystone-usbphy"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x2620738 32>; + status = "disabled"; +}; diff --git a/Documentation/devicetree/bindings/usb/keystone-usb.txt b/Documentation/devicetree/bindings/usb/keystone-usb.txt new file mode 100644 index 0000000..60527d3 --- /dev/null +++ b/Documentation/devicetree/bindings/usb/keystone-usb.txt @@ -0,0 +1,42 @@ +TI Keystone Soc USB Controller + +DWC3 GLUE + +Required properties: + - compatible: should be "ti,keystone-dwc3". + - #address-cells, #size-cells : should be '1' if the device has sub-nodes + with 'reg' property. + - reg : Address and length of the register set for the USB subsystem on + the SOC. + - interrupts : The irq number of this device that is used to interrupt the + MPU. + - ranges: allows valid 1:1 translation between child's address space and + parent's address space. + - clocks: Clock IDs array as required by the controller. + - clock-names: names of clocks correseponding to IDs in the clock property. + +Sub-nodes: +The dwc3 core should be added as subnode to Keystone DWC3 glue. +- dwc3 : + The binding details of dwc3 can be found in: + Documentation/devicetree/bindings/usb/dwc3.txt + +Example: + usb: usb@2680000 { + compatible = "ti,keystone-dwc3"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x2680000 0x10000>; + clocks = <&clkusb>; + clock-names = "usb"; + interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>; + ranges; + status = "disabled"; + + dwc3@2690000 { + compatible = "synopsys,dwc3"; + reg = <0x2690000 0x70000>; + interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>; + usb-phy = <&usb_phy>, <&usb_phy>; + }; + }; diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index 91896a3..faa38bc 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -31,6 +31,7 @@ dtb-$(CONFIG_ARCH_AT91) += pm9g45.dtb dtb-$(CONFIG_ARCH_AT91) += at91sam9n12ek.dtb # sam9x5 dtb-$(CONFIG_ARCH_AT91) += at91-ariag25.dtb +dtb-$(CONFIG_ARCH_AT91) += at91-cosino_mega2560.dtb dtb-$(CONFIG_ARCH_AT91) += at91sam9g15ek.dtb dtb-$(CONFIG_ARCH_AT91) += at91sam9g25ek.dtb dtb-$(CONFIG_ARCH_AT91) += at91sam9g35ek.dtb @@ -41,6 +42,8 @@ dtb-$(CONFIG_ARCH_AT91) += sama5d31ek.dtb dtb-$(CONFIG_ARCH_AT91) += sama5d33ek.dtb dtb-$(CONFIG_ARCH_AT91) += sama5d34ek.dtb dtb-$(CONFIG_ARCH_AT91) += sama5d35ek.dtb +dtb-$(CONFIG_ARCH_AT91) += sama5d36ek.dtb + dtb-$(CONFIG_ARCH_ATLAS6) += atlas6-evb.dtb dtb-$(CONFIG_ARCH_BCM2835) += bcm2835-rpi-b.dtb dtb-$(CONFIG_ARCH_BCM_MOBILE) += bcm11351-brt.dtb \ @@ -64,10 +67,12 @@ dtb-$(CONFIG_ARCH_EXYNOS) += exynos4210-origen.dtb \ exynos4412-odroidx.dtb \ exynos4412-origen.dtb \ exynos4412-smdk4412.dtb \ + exynos4412-tiny4412.dtb \ exynos4412-trats2.dtb \ exynos5250-arndale.dtb \ exynos5250-smdk5250.dtb \ exynos5250-snow.dtb \ + exynos5420-arndale-octa.dtb \ exynos5420-smdk5420.dtb \ exynos5440-sd5v1.dtb \ exynos5440-ssdk5440.dtb @@ -91,11 +96,13 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \ kirkwood-iomega_ix2_200.dtb \ kirkwood-is2.dtb \ kirkwood-km_kirkwood.dtb \ + kirkwood-laplug.dtb \ kirkwood-lschlv2.dtb \ kirkwood-lsxhl.dtb \ kirkwood-mplcec4.dtb \ kirkwood-mv88f6281gtw-ge.dtb \ kirkwood-netgear_readynas_duo_v2.dtb \ + kirkwood-netgear_readynas_nv+_v2.dtb \ kirkwood-ns2.dtb \ kirkwood-ns2lite.dtb \ kirkwood-ns2max.dtb \ @@ -110,6 +117,7 @@ dtb-$(CONFIG_ARCH_KIRKWOOD) += kirkwood-cloudbox.dtb \ kirkwood-ts219-6281.dtb \ kirkwood-ts219-6282.dtb dtb-$(CONFIG_ARCH_MARCO) += marco-evb.dtb +dtb-$(CONFIG_ARCH_MOXART) += moxart-uc7112lx.dtb dtb-$(CONFIG_ARCH_MSM) += qcom-msm8660-surf.dtb \ qcom-msm8960-cdp.dtb dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \ @@ -120,6 +128,7 @@ dtb-$(CONFIG_ARCH_MVEBU) += armada-370-db.dtb \ armada-xp-axpwifiap.dtb \ armada-xp-db.dtb \ armada-xp-gp.dtb \ + armada-xp-netgear-rn2120.dtb \ armada-xp-matrix.dtb \ armada-xp-openblocks-ax3-4.dtb dtb-$(CONFIG_ARCH_MXC) += \ @@ -261,6 +270,7 @@ dtb-$(CONFIG_ARCH_SUNXI) += \ sun4i-a10-hackberry.dtb \ sun5i-a10s-olinuxino-micro.dtb \ sun5i-a13-olinuxino.dtb \ + sun5i-a13-olinuxino-micro.dtb \ sun6i-a31-colombus.dtb \ sun7i-a20-cubieboard2.dtb \ sun7i-a20-cubietruck.dtb \ diff --git a/arch/arm/boot/dts/animeo_ip.dts b/arch/arm/boot/dts/animeo_ip.dts index 3a1de9e..3c4f6d9 100644 --- a/arch/arm/boot/dts/animeo_ip.dts +++ b/arch/arm/boot/dts/animeo_ip.dts @@ -90,34 +90,19 @@ nand-on-flash-bbt; status = "okay"; - at91bootstrap@0 { - label = "at91bootstrap"; - reg = <0x0 0x8000>; - }; - - barebox@8000 { + barebox@0 { label = "barebox"; - reg = <0x8000 0x40000>; - }; - - bareboxenv@48000 { - label = "bareboxenv"; - reg = <0x48000 0x8000>; - }; - - user_block@0x50000 { - label = "user_block"; - reg = <0x50000 0xb0000>; + reg = <0x0 0x58000>; }; - kernel@100000 { - label = "kernel"; - reg = <0x100000 0x1b0000>; + u_boot_env@58000 { + label = "u_boot_env"; + reg = <0x58000 0x8000>; }; - root@2b0000 { - label = "root"; - reg = <0x2b0000 0x1D50000>; + ubi@60000 { + label = "ubi"; + reg = <0x60000 0x1FA0000>; }; }; diff --git a/arch/arm/boot/dts/armada-370-mirabox.dts b/arch/arm/boot/dts/armada-370-mirabox.dts index 2471d9d..944e878 100644 --- a/arch/arm/boot/dts/armada-370-mirabox.dts +++ b/arch/arm/boot/dts/armada-370-mirabox.dts @@ -74,13 +74,13 @@ green_pwr_led { label = "mirabox:green:pwr"; gpios = <&gpio1 31 1>; - linux,default-trigger = "heartbeat"; + default-state = "keep"; }; blue_stat_led { label = "mirabox:blue:stat"; gpios = <&gpio2 0 1>; - linux,default-trigger = "cpu0"; + default-state = "off"; }; green_stat_led { @@ -139,6 +139,27 @@ reg = <0x25>; }; }; + + nand@d0000 { + status = "okay"; + num-cs = <1>; + marvell,nand-keep-config; + marvell,nand-enable-arbiter; + nand-on-flash-bbt; + + partition@0 { + label = "U-Boot"; + reg = <0 0x400000>; + }; + partition@400000 { + label = "Linux"; + reg = <0x400000 0x400000>; + }; + partition@800000 { + label = "Filesystem"; + reg = <0x800000 0x3f800000>; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/armada-370-netgear-rn102.dts b/arch/arm/boot/dts/armada-370-netgear-rn102.dts index 8ac2ac1..651aeb5 100644 --- a/arch/arm/boot/dts/armada-370-netgear-rn102.dts +++ b/arch/arm/boot/dts/armada-370-netgear-rn102.dts @@ -11,6 +11,8 @@ /dts-v1/; +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> #include "armada-370.dtsi" / { @@ -62,6 +64,7 @@ marvell,pins = "mpp57"; marvell,function = "gpio"; }; + sata1_led_pin: sata1-led-pin { marvell,pins = "mpp15"; marvell,function = "gpio"; @@ -77,6 +80,21 @@ marvell,function = "gpio"; }; + backup_button_pin: backup-button-pin { + marvell,pins = "mpp58"; + marvell,function = "gpio"; + }; + + power_button_pin: power-button-pin { + marvell,pins = "mpp62"; + marvell,function = "gpio"; + }; + + reset_button_pin: reset-button-pin { + marvell,pins = "mpp6"; + marvell,function = "gpio"; + }; + poweroff: poweroff { marvell,pins = "mpp8"; marvell,function = "gpio"; @@ -84,7 +102,7 @@ }; mdio { - phy0: ethernet-phy@0 { + phy0: ethernet-phy@0 { /* Marvell 88E1318 */ reg = <0>; }; }; @@ -104,6 +122,11 @@ clock-frequency = <100000>; status = "okay"; + isl12057: isl12057@68 { + compatible = "isl,isl12057"; + reg = <0x68>; + }; + g762: g762@3e { compatible = "gmt,g762"; reg = <0x3e>; @@ -113,82 +136,116 @@ pwm_polarity = <0>; }; }; + + nand@d0000 { + status = "okay"; + num-cs = <1>; + marvell,nand-keep-config; + marvell,nand-enable-arbiter; + nand-on-flash-bbt; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x180000>; /* 1.5MB */ + read-only; + }; + + partition@180000 { + label = "u-boot-env"; + reg = <0x180000 0x20000>; /* 128KB */ + read-only; + }; + + partition@200000 { + label = "uImage"; + reg = <0x0200000 0x600000>; /* 6MB */ + }; + + partition@800000 { + label = "minirootfs"; + reg = <0x0800000 0x400000>; /* 4MB */ + }; + + /* Last MB is for the BBT, i.e. not writable */ + partition@c00000 { + label = "ubifs"; + reg = <0x0c00000 0x7400000>; /* 116MB */ + }; + }; }; }; clocks { - #address-cells = <1>; - #size-cells = <0>; - - g762_clk: fixedclk { + g762_clk: g762-oscillator { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <8192>; }; }; - gpio_leds { + gpio-leds { compatible = "gpio-leds"; - pinctrl-0 = < &power_led_pin - &sata1_led_pin - &sata2_led_pin - &backup_led_pin >; + pinctrl-0 = <&power_led_pin + &sata1_led_pin + &sata2_led_pin + &backup_led_pin>; pinctrl-names = "default"; - blue_power_led { + blue-power-led { label = "rn102:blue:pwr"; - gpios = <&gpio1 25 1>; /* GPIO 57 Active Low */ - linux,default-trigger = "heartbeat"; + gpios = <&gpio1 25 GPIO_ACTIVE_LOW>; + default-state = "keep"; }; - green_sata1_led { + green-sata1-led { label = "rn102:green:sata1"; - gpios = <&gpio0 15 1>; /* GPIO 15 Active Low */ + gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; default-state = "on"; }; - green_sata2_led { + green-sata2-led { label = "rn102:green:sata2"; - gpios = <&gpio0 14 1>; /* GPIO 14 Active Low */ + gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; default-state = "on"; }; - green_backup_led { + green-backup-led { label = "rn102:green:backup"; - gpios = <&gpio1 24 1>; /* GPIO 56 Active Low */ + gpios = <&gpio1 24 GPIO_ACTIVE_LOW>; default-state = "on"; }; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; + pinctrl-0 = <&power_button_pin + &reset_button_pin + &backup_button_pin>; + pinctrl-names = "default"; - button@1 { + power-button { label = "Power Button"; - linux,code = <116>; /* KEY_POWER */ - gpios = <&gpio1 30 0>; + linux,code = <KEY_POWER>; + gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>; }; - button@2 { + reset-button { label = "Reset Button"; - linux,code = <0x198>; /* KEY_RESTART */ - gpios = <&gpio0 6 1>; + linux,code = <KEY_RESTART>; + gpios = <&gpio0 6 GPIO_ACTIVE_LOW>; }; - button@3 { + backup-button { label = "Backup Button"; - linux,code = <133>; /* KEY_COPY */ - gpios = <&gpio1 26 1>; + linux,code = <KEY_COPY>; + gpios = <&gpio1 26 GPIO_ACTIVE_LOW>; }; }; - gpio_poweroff { + gpio-poweroff { compatible = "gpio-poweroff"; pinctrl-0 = <&poweroff>; pinctrl-names = "default"; - gpios = <&gpio0 8 1>; + gpios = <&gpio0 8 GPIO_ACTIVE_LOW>; }; - }; diff --git a/arch/arm/boot/dts/armada-370-netgear-rn104.dts b/arch/arm/boot/dts/armada-370-netgear-rn104.dts index b0b32f5..4e27587 100644 --- a/arch/arm/boot/dts/armada-370-netgear-rn104.dts +++ b/arch/arm/boot/dts/armada-370-netgear-rn104.dts @@ -11,6 +11,8 @@ /dts-v1/; +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> #include "armada-370.dtsi" / { @@ -58,12 +60,12 @@ marvell,function = "gpio"; }; - backup_key_pin: backup-key-pin { + backup_button_pin: backup-button-pin { marvell,pins = "mpp52"; marvell,function = "gpio"; }; - power_key_pin: power-key-pin { + power_button_pin: power-button-pin { marvell,pins = "mpp62"; marvell,function = "gpio"; }; @@ -78,18 +80,18 @@ marvell,function = "gpio"; }; - reset_key_pin: reset-key-pin { + reset_button_pin: reset-button-pin { marvell,pins = "mpp65"; marvell,function = "gpio"; }; }; mdio { - phy0: ethernet-phy@0 { + phy0: ethernet-phy@0 { /* Marvell 88E1318 */ reg = <0>; }; - phy1: ethernet-phy@1 { + phy1: ethernet-phy@1 { /* Marvell 88E1318 */ reg = <1>; }; }; @@ -115,6 +117,11 @@ clock-frequency = <100000>; status = "okay"; + isl12057: isl12057@68 { + compatible = "isl,isl12057"; + reg = <0x68>; + }; + g762: g762@3e { compatible = "gmt,g762"; reg = <0x3e>; @@ -123,71 +130,133 @@ fan_startv = <1>; pwm_polarity = <0>; }; + + pca9554: pca9554@23 { + compatible = "nxp,pca9554"; + gpio-controller; + #gpio-cells = <2>; + reg = <0x23>; + }; + }; + + nand@d0000 { + status = "okay"; + num-cs = <1>; + marvell,nand-keep-config; + marvell,nand-enable-arbiter; + nand-on-flash-bbt; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x180000>; /* 1.5MB */ + read-only; + }; + + partition@180000 { + label = "u-boot-env"; + reg = <0x180000 0x20000>; /* 128KB */ + read-only; + }; + + partition@200000 { + label = "uImage"; + reg = <0x0200000 0x600000>; /* 6MB */ + }; + + partition@800000 { + label = "minirootfs"; + reg = <0x0800000 0x400000>; /* 4MB */ + }; + + /* Last MB is for the BBT, i.e. not writable */ + partition@c00000 { + label = "ubifs"; + reg = <0x0c00000 0x7400000>; /* 116MB */ + }; }; }; }; clocks { - #address-cells = <1>; - #size-cells = <0>; - - g762_clk: fixedclk { + g762_clk: g762-oscillator { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <8192>; }; }; - gpio_leds { + gpio-leds { compatible = "gpio-leds"; pinctrl-0 = <&backup_led_pin &power_led_pin>; pinctrl-names = "default"; - blue_backup_led { + blue-backup-led { label = "rn104:blue:backup"; - gpios = <&gpio1 31 0>; /* GPIO 63 Active High */ + gpios = <&gpio1 31 GPIO_ACTIVE_HIGH>; default-state = "off"; }; - blue_power_led { + blue-power-led { label = "rn104:blue:pwr"; - gpios = <&gpio2 0 1>; /* GPIO 64 Active Low */ + gpios = <&gpio2 0 GPIO_ACTIVE_LOW>; linux,default-trigger = "keep"; }; + + blue-sata1-led { + label = "rn104:blue:sata1"; + gpios = <&pca9554 0 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + blue-sata2-led { + label = "rn104:blue:sata2"; + gpios = <&pca9554 1 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + blue-sata3-led { + label = "rn104:blue:sata3"; + gpios = <&pca9554 2 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + + blue-sata4-led { + label = "rn104:blue:sata4"; + gpios = <&pca9554 3 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - pinctrl-0 = <&backup_key_pin - &power_key_pin - &reset_key_pin>; + pinctrl-0 = <&backup_button_pin + &power_button_pin + &reset_button_pin>; pinctrl-names = "default"; - button@1 { + backup-button { label = "Backup Button"; - linux,code = <133>; /* KEY_COPY */ - gpios = <&gpio1 20 1>; + linux,code = <KEY_COPY>; + gpios = <&gpio1 20 GPIO_ACTIVE_LOW>; }; - button@2 { + power-button { label = "Power Button"; - linux,code = <116>; /* KEY_POWER */ - gpios = <&gpio1 30 0>; + linux,code = <KEY_POWER>; + gpios = <&gpio1 30 GPIO_ACTIVE_HIGH>; }; - button@3 { + reset-button { label = "Reset Button"; - linux,code = <0x198>; /* KEY_RESTART */ - gpios = <&gpio2 1 1>; + linux,code = <KEY_RESTART>; + gpios = <&gpio2 1 GPIO_ACTIVE_LOW>; }; }; - gpio_poweroff { + gpio-poweroff { compatible = "gpio-poweroff"; pinctrl-0 = <&poweroff>; pinctrl-names = "default"; - gpios = <&gpio1 28 1>; + gpios = <&gpio1 28 GPIO_ACTIVE_LOW>; }; }; diff --git a/arch/arm/boot/dts/armada-370-rd.dts b/arch/arm/boot/dts/armada-370-rd.dts index f81810a..abbb807 100644 --- a/arch/arm/boot/dts/armada-370-rd.dts +++ b/arch/arm/boot/dts/armada-370-rd.dts @@ -104,6 +104,27 @@ gpios = <&gpio0 6 1>; }; }; + + nand@d0000 { + status = "okay"; + num-cs = <1>; + marvell,nand-keep-config; + marvell,nand-enable-arbiter; + nand-on-flash-bbt; + + partition@0 { + label = "U-Boot"; + reg = <0 0x800000>; + }; + partition@800000 { + label = "Linux"; + reg = <0x800000 0x800000>; + }; + partition@1000000 { + label = "Filesystem"; + reg = <0x1000000 0x3f000000>; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/armada-370-xp.dtsi b/arch/arm/boot/dts/armada-370-xp.dtsi index 80ffacd..74b5964 100644 --- a/arch/arm/boot/dts/armada-370-xp.dtsi +++ b/arch/arm/boot/dts/armada-370-xp.dtsi @@ -103,22 +103,52 @@ #size-cells = <1>; ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>; - mbusc: mbus-controller@20000 { - compatible = "marvell,mbus-controller"; - reg = <0x20000 0x100>, <0x20180 0x20>; + rtc@10300 { + compatible = "marvell,orion-rtc"; + reg = <0x10300 0x20>; + interrupts = <50>; }; - mpic: interrupt-controller@20000 { - compatible = "marvell,mpic"; - #interrupt-cells = <1>; - #size-cells = <1>; - interrupt-controller; - msi-controller; + spi0: spi@10600 { + compatible = "marvell,orion-spi"; + reg = <0x10600 0x28>; + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + interrupts = <30>; + clocks = <&coreclk 0>; + status = "disabled"; }; - coherency-fabric@20200 { - compatible = "marvell,coherency-fabric"; - reg = <0x20200 0xb0>, <0x21010 0x1c>; + spi1: spi@10680 { + compatible = "marvell,orion-spi"; + reg = <0x10680 0x28>; + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + interrupts = <92>; + clocks = <&coreclk 0>; + status = "disabled"; + }; + + i2c0: i2c@11000 { + compatible = "marvell,mv64xxx-i2c"; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <31>; + timeout-ms = <1000>; + clocks = <&coreclk 0>; + status = "disabled"; + }; + + i2c1: i2c@11100 { + compatible = "marvell,mv64xxx-i2c"; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <32>; + timeout-ms = <1000>; + clocks = <&coreclk 0>; + status = "disabled"; }; serial@12000 { @@ -146,25 +176,41 @@ clock-output-names = "nand"; }; + mbusc: mbus-controller@20000 { + compatible = "marvell,mbus-controller"; + reg = <0x20000 0x100>, <0x20180 0x20>; + }; + + mpic: interrupt-controller@20000 { + compatible = "marvell,mpic"; + #interrupt-cells = <1>; + #size-cells = <1>; + interrupt-controller; + msi-controller; + }; + + coherency-fabric@20200 { + compatible = "marvell,coherency-fabric"; + reg = <0x20200 0xb0>, <0x21010 0x1c>; + }; + timer@20300 { reg = <0x20300 0x30>, <0x21040 0x30>; interrupts = <37>, <38>, <39>, <40>, <5>, <6>; }; - sata@a0000 { - compatible = "marvell,armada-370-sata"; - reg = <0xa0000 0x5000>; - interrupts = <55>; - clocks = <&gateclk 15>, <&gateclk 30>; - clock-names = "0", "1"; + usb@50000 { + compatible = "marvell,orion-ehci"; + reg = <0x50000 0x500>; + interrupts = <45>; status = "disabled"; }; - mdio { - #address-cells = <1>; - #size-cells = <0>; - compatible = "marvell,orion-mdio"; - reg = <0x72004 0x4>; + usb@51000 { + compatible = "marvell,orion-ehci"; + reg = <0x51000 0x500>; + interrupts = <46>; + status = "disabled"; }; eth0: ethernet@70000 { @@ -175,6 +221,13 @@ status = "disabled"; }; + mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "marvell,orion-mdio"; + reg = <0x72004 0x4>; + }; + eth1: ethernet@74000 { compatible = "marvell,armada-370-neta"; reg = <0x74000 0x4000>; @@ -183,32 +236,25 @@ status = "disabled"; }; - i2c0: i2c@11000 { - compatible = "marvell,mv64xxx-i2c"; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <31>; - timeout-ms = <1000>; - clocks = <&coreclk 0>; + sata@a0000 { + compatible = "marvell,armada-370-sata"; + reg = <0xa0000 0x5000>; + interrupts = <55>; + clocks = <&gateclk 15>, <&gateclk 30>; + clock-names = "0", "1"; status = "disabled"; }; - i2c1: i2c@11100 { - compatible = "marvell,mv64xxx-i2c"; + nand@d0000 { + compatible = "marvell,armada370-nand"; + reg = <0xd0000 0x54>; #address-cells = <1>; - #size-cells = <0>; - interrupts = <32>; - timeout-ms = <1000>; - clocks = <&coreclk 0>; + #size-cells = <1>; + interrupts = <113>; + clocks = <&coredivclk 0>; status = "disabled"; }; - rtc@10300 { - compatible = "marvell,orion-rtc"; - reg = <0x10300 0x20>; - interrupts = <50>; - }; - mvsdio@d4000 { compatible = "marvell,orion-sdio"; reg = <0xd4000 0x200>; @@ -220,43 +266,6 @@ cap-mmc-highspeed; status = "disabled"; }; - - usb@50000 { - compatible = "marvell,orion-ehci"; - reg = <0x50000 0x500>; - interrupts = <45>; - status = "disabled"; - }; - - usb@51000 { - compatible = "marvell,orion-ehci"; - reg = <0x51000 0x500>; - interrupts = <46>; - status = "disabled"; - }; - - spi0: spi@10600 { - compatible = "marvell,orion-spi"; - reg = <0x10600 0x28>; - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - interrupts = <30>; - clocks = <&coreclk 0>; - status = "disabled"; - }; - - spi1: spi@10680 { - compatible = "marvell,orion-spi"; - reg = <0x10680 0x28>; - #address-cells = <1>; - #size-cells = <0>; - cell-index = <1>; - interrupts = <92>; - clocks = <&coreclk 0>; - status = "disabled"; - }; - }; }; diff --git a/arch/arm/boot/dts/armada-370.dtsi b/arch/arm/boot/dts/armada-370.dtsi index 7a4b82e..0d8530c 100644 --- a/arch/arm/boot/dts/armada-370.dtsi +++ b/arch/arm/boot/dts/armada-370.dtsi @@ -91,11 +91,6 @@ }; internal-regs { - system-controller@18200 { - compatible = "marvell,armada-370-xp-system-controller"; - reg = <0x18200 0x100>; - }; - L2: l2-cache { compatible = "marvell,aurora-outer-cache"; reg = <0x08000 0x1000>; @@ -103,8 +98,17 @@ wt-override; }; - interrupt-controller@20000 { - reg = <0x20a00 0x1d0>, <0x21870 0x58>; + i2c0: i2c@11000 { + reg = <0x11000 0x20>; + }; + + i2c1: i2c@11100 { + reg = <0x11100 0x20>; + }; + + system-controller@18200 { + compatible = "marvell,armada-370-xp-system-controller"; + reg = <0x18200 0x100>; }; pinctrl { @@ -163,9 +167,11 @@ interrupts = <91>; }; - timer@20300 { - compatible = "marvell,armada-370-timer"; - clocks = <&coreclk 2>; + gateclk: clock-gating-control@18220 { + compatible = "marvell,armada-370-gating-clock"; + reg = <0x18220 0x4>; + clocks = <&coreclk 0>; + #clock-cells = <1>; }; coreclk: mvebu-sar@18230 { @@ -174,11 +180,28 @@ #clock-cells = <1>; }; - gateclk: clock-gating-control@18220 { - compatible = "marvell,armada-370-gating-clock"; - reg = <0x18220 0x4>; + thermal@18300 { + compatible = "marvell,armada370-thermal"; + reg = <0x18300 0x4 + 0x18304 0x4>; + status = "okay"; + }; + + interrupt-controller@20000 { + reg = <0x20a00 0x1d0>, <0x21870 0x58>; + }; + + timer@20300 { + compatible = "marvell,armada-370-timer"; + clocks = <&coreclk 2>; + }; + + usb@50000 { + clocks = <&coreclk 0>; + }; + + usb@51000 { clocks = <&coreclk 0>; - #clock-cells = <1>; }; xor@60800 { @@ -218,29 +241,6 @@ dmacap,memset; }; }; - - i2c0: i2c@11000 { - reg = <0x11000 0x20>; - }; - - i2c1: i2c@11100 { - reg = <0x11100 0x20>; - }; - - usb@50000 { - clocks = <&coreclk 0>; - }; - - usb@51000 { - clocks = <&coreclk 0>; - }; - - thermal@18300 { - compatible = "marvell,armada370-thermal"; - reg = <0x18300 0x4 - 0x18304 0x4>; - status = "okay"; - }; }; }; }; diff --git a/arch/arm/boot/dts/armada-xp-gp.dts b/arch/arm/boot/dts/armada-xp-gp.dts index 2298e4a..274e2ad 100644 --- a/arch/arm/boot/dts/armada-xp-gp.dts +++ b/arch/arm/boot/dts/armada-xp-gp.dts @@ -175,6 +175,14 @@ spi-max-frequency = <108000000>; }; }; + + nand@d0000 { + status = "okay"; + num-cs = <1>; + marvell,nand-keep-config; + marvell,nand-enable-arbiter; + nand-on-flash-bbt; + }; }; }; }; diff --git a/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts new file mode 100644 index 0000000..ff049ee --- /dev/null +++ b/arch/arm/boot/dts/armada-xp-netgear-rn2120.dts @@ -0,0 +1,327 @@ +/* + * Device Tree file for NETGEAR ReadyNAS 2120 + * + * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +/dts-v1/; + +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> +#include "armada-xp-mv78230.dtsi" + +/ { + model = "NETGEAR ReadyNAS 2120"; + compatible = "netgear,readynas-2120", "marvell,armadaxp-mv78230", "marvell,armadaxp", "marvell,armada-370-xp"; + + chosen { + bootargs = "console=ttyS0,115200 earlyprintk"; + }; + + memory { + device_type = "memory"; + reg = <0 0x00000000 0 0x80000000>; /* 2GB */ + }; + + soc { + ranges = <MBUS_ID(0xf0, 0x01) 0 0 0xd0000000 0x100000 + MBUS_ID(0x01, 0x1d) 0 0 0xfff00000 0x100000>; + + pcie-controller { + status = "okay"; + + /* Connected to first Marvell 88SE9170 SATA controller */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + + /* Connected to second Marvell 88SE9170 SATA controller */ + pcie@2,0 { + /* Port 0, Lane 1 */ + status = "okay"; + }; + + /* Connected to Fresco Logic FL1009 USB 3.0 controller */ + pcie@5,0 { + /* Port 1, Lane 0 */ + status = "okay"; + }; + }; + + internal-regs { + pinctrl { + poweroff: poweroff { + marvell,pins = "mpp42"; + marvell,function = "gpio"; + }; + + power_button_pin: power-button-pin { + marvell,pins = "mpp27"; + marvell,function = "gpio"; + }; + + reset_button_pin: reset-button-pin { + marvell,pins = "mpp41"; + marvell,function = "gpio"; + }; + + sata1_led_pin: sata1-led-pin { + marvell,pins = "mpp31"; + marvell,function = "gpio"; + }; + + sata2_led_pin: sata2-led-pin { + marvell,pins = "mpp40"; + marvell,function = "gpio"; + }; + + sata3_led_pin: sata3-led-pin { + marvell,pins = "mpp44"; + marvell,function = "gpio"; + }; + + sata4_led_pin: sata4-led-pin { + marvell,pins = "mpp47"; + marvell,function = "gpio"; + }; + + sata1_power_pin: sata1-power-pin { + marvell,pins = "mpp24"; + marvell,function = "gpio"; + }; + + sata2_power_pin: sata2-power-pin { + marvell,pins = "mpp25"; + marvell,function = "gpio"; + }; + + sata3_power_pin: sata3-power-pin { + marvell,pins = "mpp26"; + marvell,function = "gpio"; + }; + + sata4_power_pin: sata4-power-pin { + marvell,pins = "mpp28"; + marvell,function = "gpio"; + }; + + sata1_pres_pin: sata1-pres-pin { + marvell,pins = "mpp32"; + marvell,function = "gpio"; + }; + + sata2_pres_pin: sata2-pres-pin { + marvell,pins = "mpp33"; + marvell,function = "gpio"; + }; + + sata3_pres_pin: sata3-pres-pin { + marvell,pins = "mpp34"; + marvell,function = "gpio"; + }; + + sata4_pres_pin: sata4-pres-pin { + marvell,pins = "mpp35"; + marvell,function = "gpio"; + }; + + err_led_pin: err-led-pin { + marvell,pins = "mpp45"; + marvell,function = "gpio"; + }; + }; + + serial@12000 { + clocks = <&coreclk 0>; + status = "okay"; + }; + + mdio { + phy0: ethernet-phy@0 { /* Marvell 88E1318 */ + reg = <0>; + }; + + phy1: ethernet-phy@1 { /* Marvell 88E1318 */ + reg = <1>; + }; + }; + + ethernet@70000 { + status = "okay"; + phy = <&phy0>; + phy-mode = "rgmii-id"; + }; + + ethernet@74000 { + status = "okay"; + phy = <&phy1>; + phy-mode = "rgmii-id"; + }; + + /* Front USB 2.0 port */ + usb@50000 { + status = "okay"; + }; + + i2c@11000 { + compatible = "marvell,mv64xxx-i2c"; + clock-frequency = <400000>; + status = "okay"; + + isl12057: isl12057@68 { + compatible = "isl,isl12057"; + reg = <0x68>; + }; + + /* Controller for rear fan #1 of 3 (Protechnic + * MGT4012XB-O20, 8000RPM) near eSATA port */ + g762_fan1: g762@3e { + compatible = "gmt,g762"; + reg = <0x3e>; + clocks = <&g762_clk>; /* input clock */ + fan_gear_mode = <0>; + fan_startv = <1>; + pwm_polarity = <0>; + }; + + /* Controller for rear (center) fan #2 of 3 */ + g762_fan2: g762@48 { + compatible = "gmt,g762"; + reg = <0x48>; + clocks = <&g762_clk>; /* input clock */ + fan_gear_mode = <0>; + fan_startv = <1>; + pwm_polarity = <0>; + }; + + /* Controller for rear fan #3 of 3 */ + g762_fan3: g762@49 { + compatible = "gmt,g762"; + reg = <0x49>; + clocks = <&g762_clk>; /* input clock */ + fan_gear_mode = <0>; + fan_startv = <1>; + pwm_polarity = <0>; + }; + + /* Temperature sensor */ + g751: g751@4c { + compatible = "gmt,g751"; + reg = <0x4c>; + }; + }; + + nand@d0000 { + status = "okay"; + num-cs = <1>; + marvell,nand-keep-config; + marvell,nand-enable-arbiter; + nand-on-flash-bbt; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x180000>; /* 1.5MB */ + read-only; + }; + + partition@180000 { + label = "u-boot-env"; + reg = <0x180000 0x20000>; /* 128KB */ + read-only; + }; + + partition@200000 { + label = "uImage"; + reg = <0x0200000 0x600000>; /* 6MB */ + }; + + partition@800000 { + label = "minirootfs"; + reg = <0x0800000 0x400000>; /* 4MB */ + }; + + /* Last MB is for the BBT, i.e. not writable */ + partition@c00000 { + label = "ubifs"; + reg = <0x0c00000 0x7400000>; /* 116MB */ + }; + }; + }; + }; + + clocks { + g762_clk: g762-oscillator { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-0 = <&sata1_led_pin &sata2_led_pin &err_led_pin + &sata3_led_pin &sata4_led_pin>; + pinctrl-names = "default"; + + red-sata1-led { + label = "rn2120:red:sata1"; + gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + red-sata2-led { + label = "rn2120:red:sata2"; + gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + red-sata3-led { + label = "rn2120:red:sata3"; + gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + red-sata4-led { + label = "rn2120:red:sata4"; + gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; + default-state = "off"; + }; + + red-err-led { + label = "rn2120:red:err"; + gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; + default-state = "off"; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-0 = <&power_button_pin &reset_button_pin>; + pinctrl-names = "default"; + + power-button { + label = "Power Button"; + linux,code = <KEY_POWER>; + gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>; + }; + + reset-button { + label = "Reset Button"; + linux,code = <KEY_RESTART>; + gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-poweroff { + compatible = "gpio-poweroff"; + pinctrl-0 = <&poweroff>; + pinctrl-names = "default"; + gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; + }; +}; diff --git a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts index 5695afc..99bcf76 100644 --- a/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts +++ b/arch/arm/boot/dts/armada-xp-openblocks-ax3-4.dts @@ -103,8 +103,7 @@ green_led { label = "green_led"; gpios = <&gpio1 21 1>; - default-state = "off"; - linux,default-trigger = "heartbeat"; + default-state = "keep"; }; }; diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi index 281c644..b8b84a2 100644 --- a/arch/arm/boot/dts/armada-xp.dtsi +++ b/arch/arm/boot/dts/armada-xp.dtsi @@ -42,13 +42,14 @@ wt-override; }; - interrupt-controller@20000 { - reg = <0x20a00 0x2d0>, <0x21070 0x58>; + i2c0: i2c@11000 { + compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c"; + reg = <0x11000 0x100>; }; - armada-370-xp-pmsu@22000 { - compatible = "marvell,armada-370-xp-pmsu"; - reg = <0x22100 0x430>, <0x20800 0x20>; + i2c1: i2c@11100 { + compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c"; + reg = <0x11100 0x100>; }; serial@12200 { @@ -68,10 +69,16 @@ status = "disabled"; }; - timer@20300 { - compatible = "marvell,armada-xp-timer"; - clocks = <&coreclk 2>, <&refclk>; - clock-names = "nbclk", "fixed"; + system-controller@18200 { + compatible = "marvell,armada-370-xp-system-controller"; + reg = <0x18200 0x500>; + }; + + gateclk: clock-gating-control@18220 { + compatible = "marvell,armada-xp-gating-clock"; + reg = <0x18220 0x4>; + clocks = <&coreclk 0>; + #clock-cells = <1>; }; coreclk: mvebu-sar@18230 { @@ -80,6 +87,13 @@ #clock-cells = <1>; }; + thermal@182b0 { + compatible = "marvell,armadaxp-thermal"; + reg = <0x182b0 0x4 + 0x184d0 0x4>; + status = "okay"; + }; + cpuclk: clock-complex@18700 { #clock-cells = <1>; compatible = "marvell,armada-xp-cpu-clock"; @@ -87,16 +101,19 @@ clocks = <&coreclk 1>; }; - gateclk: clock-gating-control@18220 { - compatible = "marvell,armada-xp-gating-clock"; - reg = <0x18220 0x4>; - clocks = <&coreclk 0>; - #clock-cells = <1>; + interrupt-controller@20000 { + reg = <0x20a00 0x2d0>, <0x21070 0x58>; }; - system-controller@18200 { - compatible = "marvell,armada-370-xp-system-controller"; - reg = <0x18200 0x500>; + timer@20300 { + compatible = "marvell,armada-xp-timer"; + clocks = <&coreclk 2>, <&refclk>; + clock-names = "nbclk", "fixed"; + }; + + armada-370-xp-pmsu@22000 { + compatible = "marvell,armada-370-xp-pmsu"; + reg = <0x22100 0x400>, <0x20800 0x20>; }; eth2: ethernet@30000 { @@ -107,6 +124,22 @@ status = "disabled"; }; + usb@50000 { + clocks = <&gateclk 18>; + }; + + usb@51000 { + clocks = <&gateclk 19>; + }; + + usb@52000 { + compatible = "marvell,orion-ehci"; + reg = <0x52000 0x500>; + interrupts = <47>; + clocks = <&gateclk 20>; + status = "disabled"; + }; + xor@60900 { compatible = "marvell,orion-xor"; reg = <0x60900 0x100 @@ -146,39 +179,6 @@ dmacap,memset; }; }; - - i2c0: i2c@11000 { - compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c"; - reg = <0x11000 0x100>; - }; - - i2c1: i2c@11100 { - compatible = "marvell,mv78230-i2c", "marvell,mv64xxx-i2c"; - reg = <0x11100 0x100>; - }; - - usb@50000 { - clocks = <&gateclk 18>; - }; - - usb@51000 { - clocks = <&gateclk 19>; - }; - - usb@52000 { - compatible = "marvell,orion-ehci"; - reg = <0x52000 0x500>; - interrupts = <47>; - clocks = <&gateclk 20>; - status = "disabled"; - }; - - thermal@182b0 { - compatible = "marvell,armadaxp-thermal"; - reg = <0x182b0 0x4 - 0x184d0 0x4>; - status = "okay"; - }; }; }; diff --git a/arch/arm/boot/dts/at91-cosino.dtsi b/arch/arm/boot/dts/at91-cosino.dtsi new file mode 100644 index 0000000..2093c4d --- /dev/null +++ b/arch/arm/boot/dts/at91-cosino.dtsi @@ -0,0 +1,122 @@ +/* + * at91-cosino.dtsi - Device Tree file for Cosino core module + * + * Copyright (C) 2013 - Rodolfo Giometti <giometti@linux.it> + * HCE Engineering + * + * Derived from at91sam9x5ek.dtsi by: + * Copyright (C) 2012 Atmel, + * 2012 Nicolas Ferre <nicolas.ferre@atmel.com> + * + * Licensed under GPLv2 or later. + */ + +#include "at91sam9g35.dtsi" + +/ { + model = "HCE Cosino core module"; + compatible = "hce,cosino", "atmel,at91sam9x5", "atmel,at91sam9"; + + chosen { + bootargs = "console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait"; + }; + + memory { + reg = <0x20000000 0x8000000>; + }; + + clocks { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + main_clock: clock@0 { + compatible = "atmel,osc", "fixed-clock"; + clock-frequency = <12000000>; + }; + }; + + ahb { + apb { + mmc0: mmc@f0008000 { + pinctrl-0 = < + &pinctrl_board_mmc0 + &pinctrl_mmc0_slot0_clk_cmd_dat0 + &pinctrl_mmc0_slot0_dat1_3>; + status = "okay"; + slot@0 { + reg = <0>; + bus-width = <4>; + cd-gpios = <&pioD 15 GPIO_ACTIVE_HIGH>; + }; + }; + + dbgu: serial@fffff200 { + status = "okay"; + }; + + usart0: serial@f801c000 { + status = "okay"; + }; + + i2c0: i2c@f8010000 { + status = "okay"; + }; + + adc0: adc@f804c000 { + atmel,adc-clock-rate = <1000000>; + atmel,adc-ts-wires = <4>; + atmel,adc-ts-pressure-threshold = <10000>; + status = "okay"; + }; + + pinctrl@fffff400 { + mmc0 { + pinctrl_board_mmc0: mmc0-board { + atmel,pins = + <AT91_PIOD 15 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>; /* PD15 gpio CD pin pull up and deglitch */ + }; + }; + }; + + watchdog@fffffe40 { + status = "okay"; + }; + }; + + nand0: nand@40000000 { + nand-bus-width = <8>; + nand-ecc-mode = "hw"; + atmel,has-pmecc; /* Enable PMECC */ + atmel,pmecc-cap = <4>; + atmel,pmecc-sector-size = <512>; + nand-on-flash-bbt; + status = "okay"; + + at91bootstrap@0 { + label = "at91bootstrap"; + reg = <0x0 0x40000>; + }; + + uboot@40000 { + label = "u-boot"; + reg = <0x40000 0x80000>; + }; + + ubootenv@c0000 { + label = "U-Boot Env"; + reg = <0xc0000 0x140000>; + }; + + kernel@200000 { + label = "kernel"; + reg = <0x200000 0x600000>; + }; + + rootfs@800000 { + label = "rootfs"; + reg = <0x800000 0x0f800000>; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/at91-cosino_mega2560.dts b/arch/arm/boot/dts/at91-cosino_mega2560.dts new file mode 100644 index 0000000..f9415dd --- /dev/null +++ b/arch/arm/boot/dts/at91-cosino_mega2560.dts @@ -0,0 +1,84 @@ +/* + * at91-cosino_mega2560.dts - Device Tree file for Cosino board with + * Mega 2560 extension + * + * Copyright (C) 2013 - Rodolfo Giometti <giometti@linux.it> + * HCE Engineering + * + * Derived from at91sam9g35ek.dts by: + * Copyright (C) 2012 Atmel, + * 2012 Nicolas Ferre <nicolas.ferre@atmel.com> + * + * Licensed under GPLv2 or later. + */ + +/dts-v1/; +#include "at91-cosino.dtsi" + +/ { + model = "HCE Cosino Mega 2560"; + compatible = "hce,cosino_mega2560", "atmel,at91sam9x5", "atmel,at91sam9"; + + ahb { + apb { + macb0: ethernet@f802c000 { + phy-mode = "rmii"; + status = "okay"; + }; + + adc0: adc@f804c000 { + atmel,adc-clock-rate = <1000000>; + atmel,adc-ts-wires = <4>; + atmel,adc-ts-pressure-threshold = <10000>; + status = "okay"; + }; + + + tsadcc: tsadcc@f804c000 { + status = "okay"; + }; + + rtc@fffffeb0 { + status = "okay"; + }; + + usart1: serial@f8020000 { + status = "okay"; + }; + + usart2: serial@f8024000 { + status = "okay"; + }; + + usb2: gadget@f803c000 { + atmel,vbus-gpio = <&pioB 16 GPIO_ACTIVE_HIGH>; + status = "okay"; + }; + + mmc1: mmc@f000c000 { + pinctrl-0 = < + &pinctrl_mmc1_slot0_clk_cmd_dat0 + &pinctrl_mmc1_slot0_dat1_3>; + status = "okay"; + slot@0 { + reg = <0>; + bus-width = <4>; + non-removable; + }; + }; + }; + + usb0: ohci@00600000 { + status = "okay"; + num-ports = <3>; + atmel,vbus-gpio = <0 /* &pioD 18 GPIO_ACTIVE_LOW */ + &pioD 19 GPIO_ACTIVE_LOW + &pioD 20 GPIO_ACTIVE_LOW + >; + }; + + usb1: ehci@00700000 { + status = "okay"; + }; + }; +}; diff --git a/arch/arm/boot/dts/at91rm9200.dtsi b/arch/arm/boot/dts/at91rm9200.dtsi index f770655..c61b16f 100644 --- a/arch/arm/boot/dts/at91rm9200.dtsi +++ b/arch/arm/boot/dts/at91rm9200.dtsi @@ -191,12 +191,12 @@ AT91_PIOA 18 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA18 periph A */ }; - pinctrl_uart0_rts: uart0_rts-0 { + pinctrl_uart0_cts: uart0_cts-0 { atmel,pins = <AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA20 periph A */ }; - pinctrl_uart0_cts: uart0_cts-0 { + pinctrl_uart0_rts: uart0_rts-0 { atmel,pins = <AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA21 periph A */ }; diff --git a/arch/arm/boot/dts/at91rm9200ek.dts b/arch/arm/boot/dts/at91rm9200ek.dts index d2d72c3..df6b0aa 100644 --- a/arch/arm/boot/dts/at91rm9200ek.dts +++ b/arch/arm/boot/dts/at91rm9200ek.dts @@ -29,10 +29,22 @@ ahb { apb { - dbgu: serial@fffff200 { + usb1: gadget@fffb0000 { + atmel,vbus-gpio = <&pioD 4 GPIO_ACTIVE_HIGH>; + atmel,pullup-gpio = <&pioD 5 GPIO_ACTIVE_HIGH>; status = "okay"; }; + macb0: ethernet@fffbc000 { + phy-mode = "rmii"; + status = "okay"; + + phy0: ethernet-phy { + interrupt-parent = <&pioC>; + interrupts = <4 IRQ_TYPE_EDGE_BOTH>; + }; + }; + usart1: serial@fffc4000 { pinctrl-0 = <&pinctrl_uart1 @@ -44,16 +56,6 @@ status = "okay"; }; - macb0: ethernet@fffbc000 { - phy-mode = "rmii"; - status = "okay"; - }; - - usb1: gadget@fffb0000 { - atmel,vbus-gpio = <&pioD 4 GPIO_ACTIVE_HIGH>; - status = "okay"; - }; - spi0: spi@fffe0000 { status = "okay"; cs-gpios = <&pioA 3 0>, <0>, <0>, <0>; @@ -63,12 +65,45 @@ reg = <0>; }; }; + + dbgu: serial@fffff200 { + status = "okay"; + }; }; usb0: ohci@00300000 { num-ports = <2>; status = "okay"; }; + + nor_flash@10000000 { + compatible = "cfi-flash"; + reg = <0x10000000 0x800000>; + linux,mtd-name = "physmap-flash.0"; + bank-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + + barebox@0 { + label = "barebox"; + reg = <0x00000 0x40000>; + }; + + bareboxenv@40000 { + label = "bareboxenv"; + reg = <0x40000 0x10000>; + }; + + kernel@50000 { + label = "kernel"; + reg = <0x50000 0x300000>; + }; + + root@350000 { + label = "root"; + reg = <0x350000 0x4B0000>; + }; + }; }; leds { diff --git a/arch/arm/boot/dts/at91sam9263.dtsi b/arch/arm/boot/dts/at91sam9263.dtsi index d5bd65f..c8fa9b9 100644 --- a/arch/arm/boot/dts/at91sam9263.dtsi +++ b/arch/arm/boot/dts/at91sam9263.dtsi @@ -30,6 +30,7 @@ i2c0 = &i2c0; ssc0 = &ssc0; ssc1 = &ssc1; + pwm0 = &pwm0; }; cpus { #address-cells = <0>; @@ -366,6 +367,34 @@ }; }; + fb { + pinctrl_fb: fb-0 { + atmel,pins = + <AT91_PIOC 1 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC1 periph A */ + AT91_PIOC 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC2 periph A */ + AT91_PIOC 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC3 periph A */ + AT91_PIOB 9 AT91_PERIPH_B AT91_PINCTRL_NONE /* PB9 periph B */ + AT91_PIOC 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC6 periph A */ + AT91_PIOC 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC7 periph A */ + AT91_PIOC 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC8 periph A */ + AT91_PIOC 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC9 periph A */ + AT91_PIOC 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC10 periph A */ + AT91_PIOC 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC11 periph A */ + AT91_PIOC 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC14 periph A */ + AT91_PIOC 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC15 periph A */ + AT91_PIOC 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC16 periph A */ + AT91_PIOC 12 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC12 periph B */ + AT91_PIOC 18 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC18 periph A */ + AT91_PIOC 19 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC19 periph A */ + AT91_PIOC 22 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC22 periph A */ + AT91_PIOC 23 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC23 periph A */ + AT91_PIOC 24 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC24 periph A */ + AT91_PIOC 17 AT91_PERIPH_B AT91_PINCTRL_NONE /* PC17 periph B */ + AT91_PIOC 26 AT91_PERIPH_A AT91_PINCTRL_NONE /* PC26 periph A */ + AT91_PIOC 27 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PC27 periph A */ + }; + }; + pioA: gpio@fffff200 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff200 0x200>; @@ -547,6 +576,23 @@ pinctrl-0 = <&pinctrl_spi1>; status = "disabled"; }; + + pwm0: pwm@fffb8000 { + compatible = "atmel,at91sam9rl-pwm"; + reg = <0xfffb8000 0x300>; + interrupts = <20 IRQ_TYPE_LEVEL_HIGH 4>; + #pwm-cells = <3>; + status = "disabled"; + }; + }; + + fb0: fb@0x00700000 { + compatible = "atmel,at91sam9263-lcdc"; + reg = <0x00700000 0x1000>; + interrupts = <26 IRQ_TYPE_LEVEL_HIGH 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fb>; + status = "disabled"; }; nand0: nand@40000000 { diff --git a/arch/arm/boot/dts/at91sam9263ek.dts b/arch/arm/boot/dts/at91sam9263ek.dts index 70f835b..15009c9 100644 --- a/arch/arm/boot/dts/at91sam9263ek.dts +++ b/arch/arm/boot/dts/at91sam9263ek.dts @@ -95,6 +95,36 @@ }; }; + fb0: fb@0x00700000 { + display = <&display0>; + status = "okay"; + + display0: display { + bits-per-pixel = <16>; + atmel,lcdcon-backlight; + atmel,dmacon = <0x1>; + atmel,lcdcon2 = <0x80008002>; + atmel,guard-time = <1>; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <4965000>; + hactive = <240>; + vactive = <320>; + hback-porch = <1>; + hfront-porch = <33>; + vback-porch = <1>; + vfront-porch = <0>; + hsync-len = <5>; + vsync-len = <1>; + hsync-active = <1>; + vsync-active = <1>; + }; + }; + }; + }; + nand0: nand@40000000 { nand-bus-width = <8>; nand-ecc-mode = "soft"; diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi index c3e5148..ef0857c 100644 --- a/arch/arm/boot/dts/at91sam9g45.dtsi +++ b/arch/arm/boot/dts/at91sam9g45.dtsi @@ -37,6 +37,7 @@ i2c1 = &i2c1; ssc0 = &ssc0; ssc1 = &ssc1; + pwm0 = &pwm0; }; cpus { #address-cells = <0>; @@ -143,6 +144,22 @@ }; }; + i2c0 { + pinctrl_i2c0: i2c0-0 { + atmel,pins = + <AT91_PIOA 21 AT91_PERIPH_A AT91_PINCTRL_NONE /* PA21 periph A TWCK0 */ + AT91_PIOA 20 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PA20 periph A TWD0 */ + }; + }; + + i2c1 { + pinctrl_i2c1: i2c1-0 { + atmel,pins = + <AT91_PIOB 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PB11 periph A TWCK1 */ + AT91_PIOB 10 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PB10 periph A TWD1 */ + }; + }; + usart0 { pinctrl_usart0: usart0-0 { atmel,pins = @@ -425,6 +442,42 @@ }; }; + fb { + pinctrl_fb: fb-0 { + atmel,pins = + <AT91_PIOE 0 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE0 periph A */ + AT91_PIOE 2 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE2 periph A */ + AT91_PIOE 3 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE3 periph A */ + AT91_PIOE 4 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE4 periph A */ + AT91_PIOE 5 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE5 periph A */ + AT91_PIOE 6 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE6 periph A */ + AT91_PIOE 7 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE7 periph A */ + AT91_PIOE 8 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE8 periph A */ + AT91_PIOE 9 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE9 periph A */ + AT91_PIOE 10 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE10 periph A */ + AT91_PIOE 11 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE11 periph A */ + AT91_PIOE 12 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE12 periph A */ + AT91_PIOE 13 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE13 periph A */ + AT91_PIOE 14 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE14 periph A */ + AT91_PIOE 15 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE15 periph A */ + AT91_PIOE 16 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE16 periph A */ + AT91_PIOE 17 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE17 periph A */ + AT91_PIOE 18 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE18 periph A */ + AT91_PIOE 19 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE19 periph A */ + AT91_PIOE 20 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE20 periph A */ + AT91_PIOE 21 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE21 periph A */ + AT91_PIOE 22 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE22 periph A */ + AT91_PIOE 23 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE23 periph A */ + AT91_PIOE 24 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE24 periph A */ + AT91_PIOE 25 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE25 periph A */ + AT91_PIOE 26 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE26 periph A */ + AT91_PIOE 27 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE27 periph A */ + AT91_PIOE 28 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE28 periph A */ + AT91_PIOE 29 AT91_PERIPH_A AT91_PINCTRL_NONE /* PE29 periph A */ + AT91_PIOE 30 AT91_PERIPH_A AT91_PINCTRL_NONE>; /* PE30 periph A */ + }; + }; + pioA: gpio@fffff200 { compatible = "atmel,at91rm9200-gpio"; reg = <0xfffff200 0x200>; @@ -542,6 +595,8 @@ compatible = "atmel,at91sam9g10-i2c"; reg = <0xfff84000 0x100>; interrupts = <12 IRQ_TYPE_LEVEL_HIGH 6>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -551,6 +606,8 @@ compatible = "atmel,at91sam9g10-i2c"; reg = <0xfff88000 0x100>; interrupts = <13 IRQ_TYPE_LEVEL_HIGH 6>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1>; #address-cells = <1>; #size-cells = <0>; status = "disabled"; @@ -614,10 +671,19 @@ }; }; + pwm0: pwm@fffb8000 { + compatible = "atmel,at91sam9rl-pwm"; + reg = <0xfffb8000 0x300>; + interrupts = <19 IRQ_TYPE_LEVEL_HIGH 4>; + #pwm-cells = <3>; + status = "disabled"; + }; + mmc0: mmc@fff80000 { compatible = "atmel,hsmci"; reg = <0xfff80000 0x600>; interrupts = <11 IRQ_TYPE_LEVEL_HIGH 0>; + pinctrl-names = "default"; dmas = <&dma 1 AT91_DMA_CFG_PER_ID(0)>; dma-names = "rxtx"; #address-cells = <1>; @@ -629,6 +695,7 @@ compatible = "atmel,hsmci"; reg = <0xfffd0000 0x600>; interrupts = <29 IRQ_TYPE_LEVEL_HIGH 0>; + pinctrl-names = "default"; dmas = <&dma 1 AT91_DMA_CFG_PER_ID(13)>; dma-names = "rxtx"; #address-cells = <1>; @@ -727,6 +794,15 @@ }; }; + fb0: fb@0x00500000 { + compatible = "atmel,at91sam9g45-lcdc"; + reg = <0x00500000 0x1000>; + interrupts = <23 IRQ_TYPE_LEVEL_HIGH 3>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_fb>; + status = "disabled"; + }; + nand0: nand@40000000 { compatible = "atmel,at91rm9200-nand"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/at91sam9m10g45ek.dts b/arch/arm/boot/dts/at91sam9m10g45ek.dts index a4b00e5..7ff665a 100644 --- a/arch/arm/boot/dts/at91sam9m10g45ek.dts +++ b/arch/arm/boot/dts/at91sam9m10g45ek.dts @@ -105,6 +105,14 @@ AT91_PIOD 29 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP>; /* PD29 gpio WP pin pull up */ }; }; + + pwm0 { + pinctrl_pwm_leds: pwm-led { + atmel,pins = + <AT91_PIOD 0 AT91_PERIPH_B AT91_PINCTRL_PULL_UP /* PD0 periph B */ + AT91_PIOD 31 AT91_PERIPH_B AT91_PINCTRL_PULL_UP>; /* PD31 periph B */ + }; + }; }; spi0: spi@fffa4000{ @@ -121,6 +129,42 @@ atmel,vbus-gpio = <&pioB 19 GPIO_ACTIVE_HIGH>; status = "okay"; }; + + pwm0: pwm@fffb8000 { + status = "okay"; + + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_pwm_leds>; + }; + }; + + fb0: fb@0x00500000 { + display = <&display0>; + status = "okay"; + + display0: display { + bits-per-pixel = <32>; + atmel,lcdcon-backlight; + atmel,dmacon = <0x1>; + atmel,lcdcon2 = <0x80008002>; + atmel,guard-time = <9>; + atmel,lcd-wiring-mode = "RGB"; + + display-timings { + native-mode = <&timing0>; + timing0: timing0 { + clock-frequency = <9000000>; + hactive = <480>; + vactive = <272>; + hback-porch = <1>; + hfront-porch = <1>; + vback-porch = <40>; + vfront-porch = <1>; + hsync-len = <45>; + vsync-len = <1>; + }; + }; + }; }; nand0: nand@40000000 { @@ -165,16 +209,22 @@ gpios = <&pioD 30 GPIO_ACTIVE_HIGH>; linux,default-trigger = "heartbeat"; }; + }; + + pwmleds { + compatible = "pwm-leds"; d6 { label = "d6"; - gpios = <&pioD 0 GPIO_ACTIVE_LOW>; + pwms = <&pwm0 3 5000 0>; + max-brightness = <255>; linux,default-trigger = "nand-disk"; }; d7 { label = "d7"; - gpios = <&pioD 31 GPIO_ACTIVE_LOW>; + pwms = <&pwm0 1 5000 0>; + max-brightness = <255>; linux,default-trigger = "mmc0"; }; }; diff --git a/arch/arm/boot/dts/at91sam9n12.dtsi b/arch/arm/boot/dts/at91sam9n12.dtsi index 6224f9f..7248270 100644 --- a/arch/arm/boot/dts/at91sam9n12.dtsi +++ b/arch/arm/boot/dts/at91sam9n12.dtsi @@ -33,6 +33,7 @@ i2c0 = &i2c0; i2c1 = &i2c1; ssc0 = &ssc0; + pwm0 = &pwm0; }; cpus { #address-cells = <0>; @@ -542,6 +543,14 @@ reg = <0xfffffe40 0x10>; status = "disabled"; }; + + pwm0: pwm@f8034000 { + compatible = "atmel,at91sam9rl-pwm"; + reg = <0xf8034000 0x300>; + interrupts = <18 IRQ_TYPE_LEVEL_HIGH 4>; + #pwm-cells = <3>; + status = "disabled"; + }; }; nand0: nand@40000000 { diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi index 40267a1..6e5e9cf 100644 --- a/arch/arm/boot/dts/at91sam9x5.dtsi +++ b/arch/arm/boot/dts/at91sam9x5.dtsi @@ -35,6 +35,7 @@ i2c1 = &i2c1; i2c2 = &i2c2; ssc0 = &ssc0; + pwm0 = &pwm0; }; cpus { #address-cells = <0>; @@ -762,6 +763,14 @@ interrupts = <1 IRQ_TYPE_LEVEL_HIGH 7>; status = "disabled"; }; + + pwm0: pwm@f8034000 { + compatible = "atmel,at91sam9rl-pwm"; + reg = <0xf8034000 0x300>; + interrupts = <18 IRQ_TYPE_LEVEL_HIGH 4>; + #pwm-cells = <3>; + status = "disabled"; + }; }; nand0: nand@40000000 { diff --git a/arch/arm/boot/dts/atlas6.dtsi b/arch/arm/boot/dts/atlas6.dtsi index 978bab4..f8674bc 100644 --- a/arch/arm/boot/dts/atlas6.dtsi +++ b/arch/arm/boot/dts/atlas6.dtsi @@ -27,6 +27,15 @@ timebase-frequency = <0>; bus-frequency = <0>; clock-frequency = <0>; + clocks = <&clks 12>; + operating-points = < + /* kHz uV */ + 200000 1025000 + 400000 1025000 + 600000 1050000 + 800000 1100000 + >; + clock-latency = <150000>; }; }; @@ -69,6 +78,7 @@ cphifbg@88030000 { compatible = "sirf,prima2-cphifbg"; reg = <0x88030000 0x1000>; + clocks = <&clks 42>; }; }; @@ -546,6 +556,12 @@ sirf,function = "usp1"; }; }; + usp1_uart_nostreamctrl_pins_a: usp1@1 { + usp1 { + sirf,pins = "usp1_uart_nostreamctrl_grp"; + sirf,function = "usp1_uart_nostreamctrl"; + }; + }; usb0_upli_drvbus_pins_a: usb0_upli_drvbus@0 { usb0_upli_drvbus { sirf,pins = "usb0_upli_drvbusgrp"; @@ -636,6 +652,7 @@ reg = <0x56100000 0x100000>; interrupts = <38>; status = "disabled"; + bus-width = <4>; clocks = <&clks 36>; }; @@ -645,6 +662,7 @@ reg = <0x56200000 0x100000>; interrupts = <23>; status = "disabled"; + bus-width = <4>; clocks = <&clks 37>; }; @@ -654,6 +672,7 @@ reg = <0x56300000 0x100000>; interrupts = <23>; status = "disabled"; + bus-width = <4>; clocks = <&clks 37>; }; @@ -663,6 +682,7 @@ reg = <0x56500000 0x100000>; interrupts = <39>; status = "disabled"; + bus-width = <4>; clocks = <&clks 38>; }; @@ -697,6 +717,12 @@ interrupts = <52 53 54>; }; + minigpsrtc@2000 { + compatible = "sirf,prima2-minigpsrtc"; + reg = <0x2000 0x1000>; + interrupts = <54>; + }; + pwrc@3000 { compatible = "sirf,prima2-pwrc"; reg = <0x3000 0x1000>; diff --git a/arch/arm/boot/dts/bcm2835-rpi-b.dts b/arch/arm/boot/dts/bcm2835-rpi-b.dts index 6e9deb7..2a3b1c1 100644 --- a/arch/arm/boot/dts/bcm2835-rpi-b.dts +++ b/arch/arm/boot/dts/bcm2835-rpi-b.dts @@ -23,10 +23,15 @@ &gpio { pinctrl-names = "default"; - pinctrl-0 = <&alt0 &alt3>; + pinctrl-0 = <&gpioout &alt0 &alt3>; + + gpioout: gpioout { + brcm,pins = <6>; + brcm,function = <1>; /* GPIO out */ + }; alt0: alt0 { - brcm,pins = <0 1 2 3 4 5 6 7 8 9 10 11 14 15 40 45>; + brcm,pins = <0 1 2 3 4 5 7 8 9 10 11 14 15 40 45>; brcm,function = <4>; /* alt0 */ }; diff --git a/arch/arm/boot/dts/bcm2835.dtsi b/arch/arm/boot/dts/bcm2835.dtsi index aa537ed..b021c96 100644 --- a/arch/arm/boot/dts/bcm2835.dtsi +++ b/arch/arm/boot/dts/bcm2835.dtsi @@ -107,6 +107,12 @@ clocks = <&clk_mmc>; status = "disabled"; }; + + usb { + compatible = "brcm,bcm2835-usb"; + reg = <0x7e980000 0x10000>; + interrupts = <1 9>; + }; }; clocks { diff --git a/arch/arm/boot/dts/da850-evm.dts b/arch/arm/boot/dts/da850-evm.dts index 588ce58..1e11e5a 100644 --- a/arch/arm/boot/dts/da850-evm.dts +++ b/arch/arm/boot/dts/da850-evm.dts @@ -101,6 +101,9 @@ pinctrl-names = "default"; pinctrl-0 = <&mii_pins>; }; + gpio: gpio@1e26000 { + status = "okay"; + }; }; nand_cs3@62000000 { status = "okay"; diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi index 8d17346..b695548 100644 --- a/arch/arm/boot/dts/da850.dtsi +++ b/arch/arm/boot/dts/da850.dtsi @@ -8,6 +8,7 @@ * option) any later version. */ #include "skeleton.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> / { arm { @@ -256,6 +257,19 @@ 36 >; }; + gpio: gpio@1e26000 { + compatible = "ti,dm6441-gpio"; + gpio-controller; + reg = <0x226000 0x1000>; + interrupts = <42 IRQ_TYPE_EDGE_BOTH + 43 IRQ_TYPE_EDGE_BOTH 44 IRQ_TYPE_EDGE_BOTH + 45 IRQ_TYPE_EDGE_BOTH 46 IRQ_TYPE_EDGE_BOTH + 47 IRQ_TYPE_EDGE_BOTH 48 IRQ_TYPE_EDGE_BOTH + 49 IRQ_TYPE_EDGE_BOTH 50 IRQ_TYPE_EDGE_BOTH>; + ti,ngpio = <144>; + ti,davinci-gpio-unbanked = <0>; + status = "disabled"; + }; }; nand_cs3@62000000 { compatible = "ti,davinci-nand"; diff --git a/arch/arm/boot/dts/dove-cubox.dts b/arch/arm/boot/dts/dove-cubox.dts index 8349a24..7a70f4ca 100644 --- a/arch/arm/boot/dts/dove-cubox.dts +++ b/arch/arm/boot/dts/dove-cubox.dts @@ -23,7 +23,7 @@ power { label = "Power"; gpios = <&gpio0 18 1>; - linux,default-trigger = "default-on"; + default-state = "keep"; }; }; diff --git a/arch/arm/boot/dts/dove.dtsi b/arch/arm/boot/dts/dove.dtsi index 113a8bc..8de1031 100644 --- a/arch/arm/boot/dts/dove.dtsi +++ b/arch/arm/boot/dts/dove.dtsi @@ -107,51 +107,29 @@ 0xffffe000 MBUS_ID(0x03, 0x01) 0 0x0000800 /* CESA SRAM 2k */ 0xfffff000 MBUS_ID(0x0d, 0x00) 0 0x0000800>; /* PMU SRAM 2k */ - mbusc: mbus-ctrl@20000 { - compatible = "marvell,mbus-controller"; - reg = <0x20000 0x80>, <0x800100 0x8>; - }; - - timer: timer@20300 { - compatible = "marvell,orion-timer"; - reg = <0x20300 0x20>; - interrupt-parent = <&bridge_intc>; - interrupts = <1>, <2>; + spi0: spi-ctrl@10600 { + compatible = "marvell,orion-spi"; + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + interrupts = <6>; + reg = <0x10600 0x28>; clocks = <&core_clk 0>; + pinctrl-0 = <&pmx_spi0>; + pinctrl-names = "default"; + status = "disabled"; }; - intc: main-interrupt-ctrl@20200 { - compatible = "marvell,orion-intc"; - interrupt-controller; - #interrupt-cells = <1>; - reg = <0x20200 0x10>, <0x20210 0x10>; - }; - - bridge_intc: bridge-interrupt-ctrl@20110 { - compatible = "marvell,orion-bridge-intc"; - interrupt-controller; - #interrupt-cells = <1>; - reg = <0x20110 0x8>; - interrupts = <0>; - marvell,#interrupts = <5>; - }; - - core_clk: core-clocks@d0214 { - compatible = "marvell,dove-core-clock"; - reg = <0xd0214 0x4>; - #clock-cells = <1>; - }; - - gate_clk: clock-gating-ctrl@d0038 { - compatible = "marvell,dove-gating-clock"; - reg = <0xd0038 0x4>; + i2c0: i2c-ctrl@11000 { + compatible = "marvell,mv64xxx-i2c"; + reg = <0x11000 0x20>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <11>; + clock-frequency = <400000>; + timeout-ms = <1000>; clocks = <&core_clk 0>; - #clock-cells = <1>; - }; - - thermal: thermal-diode@d001c { - compatible = "marvell,dove-thermal"; - reg = <0xd001c 0x0c>, <0xd005c 0x08>; + status = "disabled"; }; uart0: serial@12000 { @@ -192,34 +170,224 @@ status = "disabled"; }; - gpio0: gpio-ctrl@d0400 { - compatible = "marvell,orion-gpio"; - #gpio-cells = <2>; - gpio-controller; - reg = <0xd0400 0x20>; - ngpios = <32>; + spi1: spi-ctrl@14600 { + compatible = "marvell,orion-spi"; + #address-cells = <1>; + #size-cells = <0>; + cell-index = <1>; + interrupts = <5>; + reg = <0x14600 0x28>; + clocks = <&core_clk 0>; + status = "disabled"; + }; + + mbusc: mbus-ctrl@20000 { + compatible = "marvell,mbus-controller"; + reg = <0x20000 0x80>, <0x800100 0x8>; + }; + + bridge_intc: bridge-interrupt-ctrl@20110 { + compatible = "marvell,orion-bridge-intc"; interrupt-controller; - #interrupt-cells = <2>; - interrupts = <12>, <13>, <14>, <60>; + #interrupt-cells = <1>; + reg = <0x20110 0x8>; + interrupts = <0>; + marvell,#interrupts = <5>; }; - gpio1: gpio-ctrl@d0420 { - compatible = "marvell,orion-gpio"; - #gpio-cells = <2>; - gpio-controller; - reg = <0xd0420 0x20>; - ngpios = <32>; + intc: main-interrupt-ctrl@20200 { + compatible = "marvell,orion-intc"; interrupt-controller; - #interrupt-cells = <2>; - interrupts = <61>; + #interrupt-cells = <1>; + reg = <0x20200 0x10>, <0x20210 0x10>; }; - gpio2: gpio-ctrl@e8400 { - compatible = "marvell,orion-gpio"; - #gpio-cells = <2>; - gpio-controller; - reg = <0xe8400 0x0c>; - ngpios = <8>; + timer: timer@20300 { + compatible = "marvell,orion-timer"; + reg = <0x20300 0x20>; + interrupt-parent = <&bridge_intc>; + interrupts = <1>, <2>; + clocks = <&core_clk 0>; + }; + + crypto: crypto-engine@30000 { + compatible = "marvell,orion-crypto"; + reg = <0x30000 0x10000>, + <0xffffe000 0x800>; + reg-names = "regs", "sram"; + interrupts = <31>; + clocks = <&gate_clk 15>; + status = "okay"; + }; + + ehci0: usb-host@50000 { + compatible = "marvell,orion-ehci"; + reg = <0x50000 0x1000>; + interrupts = <24>; + clocks = <&gate_clk 0>; + status = "okay"; + }; + + ehci1: usb-host@51000 { + compatible = "marvell,orion-ehci"; + reg = <0x51000 0x1000>; + interrupts = <25>; + clocks = <&gate_clk 1>; + status = "okay"; + }; + + xor0: dma-engine@60800 { + compatible = "marvell,orion-xor"; + reg = <0x60800 0x100 + 0x60a00 0x100>; + clocks = <&gate_clk 23>; + status = "okay"; + + channel0 { + interrupts = <39>; + dmacap,memcpy; + dmacap,xor; + }; + + channel1 { + interrupts = <40>; + dmacap,memcpy; + dmacap,xor; + }; + }; + + xor1: dma-engine@60900 { + compatible = "marvell,orion-xor"; + reg = <0x60900 0x100 + 0x60b00 0x100>; + clocks = <&gate_clk 24>; + status = "okay"; + + channel0 { + interrupts = <42>; + dmacap,memcpy; + dmacap,xor; + }; + + channel1 { + interrupts = <43>; + dmacap,memcpy; + dmacap,xor; + }; + }; + + sdio1: sdio-host@90000 { + compatible = "marvell,dove-sdhci"; + reg = <0x90000 0x100>; + interrupts = <36>, <38>; + clocks = <&gate_clk 9>; + pinctrl-0 = <&pmx_sdio1>; + pinctrl-names = "default"; + status = "disabled"; + }; + + eth: ethernet-ctrl@72000 { + compatible = "marvell,orion-eth"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x72000 0x4000>; + clocks = <&gate_clk 2>; + marvell,tx-checksum-limit = <1600>; + status = "disabled"; + + ethernet-port@0 { + device_type = "network"; + compatible = "marvell,orion-eth-port"; + reg = <0>; + interrupts = <29>; + /* overwrite MAC address in bootloader */ + local-mac-address = [00 00 00 00 00 00]; + phy-handle = <ðphy>; + }; + }; + + mdio: mdio-bus@72004 { + compatible = "marvell,orion-mdio"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x72004 0x84>; + interrupts = <30>; + clocks = <&gate_clk 2>; + status = "disabled"; + + ethphy: ethernet-phy { + device_type = "ethernet-phy"; + /* set phy address in board file */ + }; + }; + + sdio0: sdio-host@92000 { + compatible = "marvell,dove-sdhci"; + reg = <0x92000 0x100>; + interrupts = <35>, <37>; + clocks = <&gate_clk 8>; + pinctrl-0 = <&pmx_sdio0>; + pinctrl-names = "default"; + status = "disabled"; + }; + + sata0: sata-host@a0000 { + compatible = "marvell,orion-sata"; + reg = <0xa0000 0x2400>; + interrupts = <62>; + clocks = <&gate_clk 3>; + phys = <&sata_phy0>; + phy-names = "port0"; + nr-ports = <1>; + status = "disabled"; + }; + + sata_phy0: sata-phy@a2000 { + compatible = "marvell,mvebu-sata-phy"; + reg = <0xa2000 0x0334>; + clocks = <&gate_clk 3>; + clock-names = "sata"; + #phy-cells = <0>; + status = "ok"; + }; + + audio0: audio-controller@b0000 { + compatible = "marvell,dove-audio"; + reg = <0xb0000 0x2210>; + interrupts = <19>, <20>; + clocks = <&gate_clk 12>; + clock-names = "internal"; + status = "disabled"; + }; + + audio1: audio-controller@b4000 { + compatible = "marvell,dove-audio"; + reg = <0xb4000 0x2210>; + interrupts = <21>, <22>; + clocks = <&gate_clk 13>; + clock-names = "internal"; + status = "disabled"; + }; + + thermal: thermal-diode@d001c { + compatible = "marvell,dove-thermal"; + reg = <0xd001c 0x0c>, <0xd005c 0x08>; + }; + + gate_clk: clock-gating-ctrl@d0038 { + compatible = "marvell,dove-gating-clock"; + reg = <0xd0038 0x4>; + clocks = <&core_clk 0>; + #clock-cells = <1>; + }; + + pmu_intc: pmu-interrupt-ctrl@d0050 { + compatible = "marvell,dove-pmu-intc"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0xd0050 0x8>; + interrupts = <33>; + marvell,#interrupts = <7>; }; pinctrl: pin-ctrl@d0200 { @@ -413,193 +581,47 @@ }; }; - spi0: spi-ctrl@10600 { - compatible = "marvell,orion-spi"; - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - interrupts = <6>; - reg = <0x10600 0x28>; - clocks = <&core_clk 0>; - pinctrl-0 = <&pmx_spi0>; - pinctrl-names = "default"; - status = "disabled"; - }; - - spi1: spi-ctrl@14600 { - compatible = "marvell,orion-spi"; - #address-cells = <1>; - #size-cells = <0>; - cell-index = <1>; - interrupts = <5>; - reg = <0x14600 0x28>; - clocks = <&core_clk 0>; - status = "disabled"; - }; - - i2c0: i2c-ctrl@11000 { - compatible = "marvell,mv64xxx-i2c"; - reg = <0x11000 0x20>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <11>; - clock-frequency = <400000>; - timeout-ms = <1000>; - clocks = <&core_clk 0>; - status = "disabled"; - }; - - ehci0: usb-host@50000 { - compatible = "marvell,orion-ehci"; - reg = <0x50000 0x1000>; - interrupts = <24>; - clocks = <&gate_clk 0>; - status = "okay"; - }; - - ehci1: usb-host@51000 { - compatible = "marvell,orion-ehci"; - reg = <0x51000 0x1000>; - interrupts = <25>; - clocks = <&gate_clk 1>; - status = "okay"; - }; - - sdio0: sdio-host@92000 { - compatible = "marvell,dove-sdhci"; - reg = <0x92000 0x100>; - interrupts = <35>, <37>; - clocks = <&gate_clk 8>; - pinctrl-0 = <&pmx_sdio0>; - pinctrl-names = "default"; - status = "disabled"; + core_clk: core-clocks@d0214 { + compatible = "marvell,dove-core-clock"; + reg = <0xd0214 0x4>; + #clock-cells = <1>; }; - sdio1: sdio-host@90000 { - compatible = "marvell,dove-sdhci"; - reg = <0x90000 0x100>; - interrupts = <36>, <38>; - clocks = <&gate_clk 9>; - pinctrl-0 = <&pmx_sdio1>; - pinctrl-names = "default"; - status = "disabled"; + gpio0: gpio-ctrl@d0400 { + compatible = "marvell,orion-gpio"; + #gpio-cells = <2>; + gpio-controller; + reg = <0xd0400 0x20>; + ngpios = <32>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <12>, <13>, <14>, <60>; }; - sata0: sata-host@a0000 { - compatible = "marvell,orion-sata"; - reg = <0xa0000 0x2400>; - interrupts = <62>; - clocks = <&gate_clk 3>; - nr-ports = <1>; - status = "disabled"; + gpio1: gpio-ctrl@d0420 { + compatible = "marvell,orion-gpio"; + #gpio-cells = <2>; + gpio-controller; + reg = <0xd0420 0x20>; + ngpios = <32>; + interrupt-controller; + #interrupt-cells = <2>; + interrupts = <61>; }; rtc: real-time-clock@d8500 { compatible = "marvell,orion-rtc"; reg = <0xd8500 0x20>; + interrupt-parent = <&pmu_intc>; + interrupts = <5>; }; - crypto: crypto-engine@30000 { - compatible = "marvell,orion-crypto"; - reg = <0x30000 0x10000>, - <0xffffe000 0x800>; - reg-names = "regs", "sram"; - interrupts = <31>; - clocks = <&gate_clk 15>; - status = "okay"; - }; - - xor0: dma-engine@60800 { - compatible = "marvell,orion-xor"; - reg = <0x60800 0x100 - 0x60a00 0x100>; - clocks = <&gate_clk 23>; - status = "okay"; - - channel0 { - interrupts = <39>; - dmacap,memcpy; - dmacap,xor; - }; - - channel1 { - interrupts = <40>; - dmacap,memcpy; - dmacap,xor; - }; - }; - - xor1: dma-engine@60900 { - compatible = "marvell,orion-xor"; - reg = <0x60900 0x100 - 0x60b00 0x100>; - clocks = <&gate_clk 24>; - status = "okay"; - - channel0 { - interrupts = <42>; - dmacap,memcpy; - dmacap,xor; - }; - - channel1 { - interrupts = <43>; - dmacap,memcpy; - dmacap,xor; - }; - }; - - mdio: mdio-bus@72004 { - compatible = "marvell,orion-mdio"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x72004 0x84>; - interrupts = <30>; - clocks = <&gate_clk 2>; - status = "disabled"; - - ethphy: ethernet-phy { - device-type = "ethernet-phy"; - /* set phy address in board file */ - }; - }; - - eth: ethernet-ctrl@72000 { - compatible = "marvell,orion-eth"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x72000 0x4000>; - clocks = <&gate_clk 2>; - marvell,tx-checksum-limit = <1600>; - status = "disabled"; - - ethernet-port@0 { - device_type = "network"; - compatible = "marvell,orion-eth-port"; - reg = <0>; - interrupts = <29>; - /* overwrite MAC address in bootloader */ - local-mac-address = [00 00 00 00 00 00]; - phy-handle = <ðphy>; - }; - }; - - audio0: audio-controller@b0000 { - compatible = "marvell,dove-audio"; - reg = <0xb0000 0x2210>; - interrupts = <19>, <20>; - clocks = <&gate_clk 12>; - clock-names = "internal"; - status = "disabled"; - }; - - audio1: audio-controller@b4000 { - compatible = "marvell,dove-audio"; - reg = <0xb4000 0x2210>; - interrupts = <21>, <22>; - clocks = <&gate_clk 13>; - clock-names = "internal"; - status = "disabled"; + gpio2: gpio-ctrl@e8400 { + compatible = "marvell,orion-gpio"; + #gpio-cells = <2>; + gpio-controller; + reg = <0xe8400 0x0c>; + ngpios = <8>; }; }; }; diff --git a/arch/arm/boot/dts/emev2-kzm9d.dts b/arch/arm/boot/dts/emev2-kzm9d.dts index 861aa7d..50ccd15 100644 --- a/arch/arm/boot/dts/emev2-kzm9d.dts +++ b/arch/arm/boot/dts/emev2-kzm9d.dts @@ -9,7 +9,10 @@ */ /dts-v1/; -/include/ "emev2.dtsi" +#include "emev2.dtsi" +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/irq.h> / { model = "EMEV2 KZM9D Board"; @@ -47,11 +50,46 @@ reg = <0x20000000 0x10000>; phy-mode = "mii"; interrupt-parent = <&gpio0>; - interrupts = <1 1>; /* active high */ + interrupts = <1 IRQ_TYPE_EDGE_RISING>; reg-io-width = <4>; smsc,irq-active-high; smsc,irq-push-pull; vddvario-supply = <®_1p8v>; vdd33a-supply = <®_3p3v>; }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + + button@1 { + debounce_interval = <50>; + wakeup = <1>; + label = "DSW2-1"; + linux,code = <KEY_1>; + gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; + }; + button@2 { + debounce_interval = <50>; + wakeup = <1>; + label = "DSW2-2"; + linux,code = <KEY_2>; + gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; + }; + button@3 { + debounce_interval = <50>; + wakeup = <1>; + label = "DSW2-3"; + linux,code = <KEY_3>; + gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>; + }; + button@4 { + debounce_interval = <50>; + wakeup = <1>; + label = "DSW2-4"; + linux,code = <KEY_4>; + gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>; + }; + }; }; diff --git a/arch/arm/boot/dts/emev2.dtsi b/arch/arm/boot/dts/emev2.dtsi index 9063a443..e37985f 100644 --- a/arch/arm/boot/dts/emev2.dtsi +++ b/arch/arm/boot/dts/emev2.dtsi @@ -8,7 +8,8 @@ * kind, whether express or implied. */ -/include/ "skeleton.dtsi" +#include "skeleton.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> / { compatible = "renesas,emev2"; @@ -48,44 +49,129 @@ pmu { compatible = "arm,cortex-a9-pmu"; - interrupts = <0 120 4>, - <0 121 4>; + interrupts = <0 120 IRQ_TYPE_LEVEL_HIGH>, + <0 121 IRQ_TYPE_LEVEL_HIGH>; + }; + + smu@e0110000 { + compatible = "renesas,emev2-smu"; + reg = <0xe0110000 0x10000>; + #address-cells = <2>; + #size-cells = <0>; + + c32ki: c32ki { + compatible = "fixed-clock"; + clock-frequency = <32768>; + #clock-cells = <0>; + }; + pll3_fo: pll3_fo { + compatible = "fixed-factor-clock"; + clocks = <&c32ki>; + clock-div = <1>; + clock-mult = <7000>; + #clock-cells = <0>; + }; + usia_u0_sclkdiv: usia_u0_sclkdiv { + compatible = "renesas,emev2-smu-clkdiv"; + reg = <0x610 0>; + clocks = <&pll3_fo>; + #clock-cells = <0>; + }; + usib_u1_sclkdiv: usib_u1_sclkdiv { + compatible = "renesas,emev2-smu-clkdiv"; + reg = <0x65c 0>; + clocks = <&pll3_fo>; + #clock-cells = <0>; + }; + usib_u2_sclkdiv: usib_u2_sclkdiv { + compatible = "renesas,emev2-smu-clkdiv"; + reg = <0x65c 16>; + clocks = <&pll3_fo>; + #clock-cells = <0>; + }; + usib_u3_sclkdiv: usib_u3_sclkdiv { + compatible = "renesas,emev2-smu-clkdiv"; + reg = <0x660 0>; + clocks = <&pll3_fo>; + #clock-cells = <0>; + }; + usia_u0_sclk: usia_u0_sclk { + compatible = "renesas,emev2-smu-gclk"; + reg = <0x4a0 1>; + clocks = <&usia_u0_sclkdiv>; + #clock-cells = <0>; + }; + usib_u1_sclk: usib_u1_sclk { + compatible = "renesas,emev2-smu-gclk"; + reg = <0x4b8 1>; + clocks = <&usib_u1_sclkdiv>; + #clock-cells = <0>; + }; + usib_u2_sclk: usib_u2_sclk { + compatible = "renesas,emev2-smu-gclk"; + reg = <0x4bc 1>; + clocks = <&usib_u2_sclkdiv>; + #clock-cells = <0>; + }; + usib_u3_sclk: usib_u3_sclk { + compatible = "renesas,emev2-smu-gclk"; + reg = <0x4c0 1>; + clocks = <&usib_u3_sclkdiv>; + #clock-cells = <0>; + }; + sti_sclk: sti_sclk { + compatible = "renesas,emev2-smu-gclk"; + reg = <0x528 1>; + clocks = <&c32ki>; + #clock-cells = <0>; + }; }; sti@e0180000 { compatible = "renesas,em-sti"; reg = <0xe0180000 0x54>; - interrupts = <0 125 0>; + interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&sti_sclk>; + clock-names = "sclk"; }; uart@e1020000 { compatible = "renesas,em-uart"; reg = <0xe1020000 0x38>; - interrupts = <0 8 0>; + interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&usia_u0_sclk>; + clock-names = "sclk"; }; uart@e1030000 { compatible = "renesas,em-uart"; reg = <0xe1030000 0x38>; - interrupts = <0 9 0>; + interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&usib_u1_sclk>; + clock-names = "sclk"; }; uart@e1040000 { compatible = "renesas,em-uart"; reg = <0xe1040000 0x38>; - interrupts = <0 10 0>; + interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&usib_u2_sclk>; + clock-names = "sclk"; }; uart@e1050000 { compatible = "renesas,em-uart"; reg = <0xe1050000 0x38>; - interrupts = <0 11 0>; + interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&usib_u3_sclk>; + clock-names = "sclk"; }; gpio0: gpio@e0050000 { compatible = "renesas,em-gio"; reg = <0xe0050000 0x2c>, <0xe0050040 0x20>; - interrupts = <0 67 0>, <0 68 0>; + interrupts = <0 67 IRQ_TYPE_LEVEL_HIGH>, + <0 68 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; #gpio-cells = <2>; ngpios = <32>; @@ -95,7 +181,8 @@ gpio1: gpio@e0050080 { compatible = "renesas,em-gio"; reg = <0xe0050080 0x2c>, <0xe00500c0 0x20>; - interrupts = <0 69 0>, <0 70 0>; + interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>, + <0 70 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; #gpio-cells = <2>; ngpios = <32>; @@ -105,7 +192,8 @@ gpio2: gpio@e0050100 { compatible = "renesas,em-gio"; reg = <0xe0050100 0x2c>, <0xe0050140 0x20>; - interrupts = <0 71 0>, <0 72 0>; + interrupts = <0 71 IRQ_TYPE_LEVEL_HIGH>, + <0 72 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; #gpio-cells = <2>; ngpios = <32>; @@ -115,7 +203,8 @@ gpio3: gpio@e0050180 { compatible = "renesas,em-gio"; reg = <0xe0050180 0x2c>, <0xe00501c0 0x20>; - interrupts = <0 73 0>, <0 74 0>; + interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>, + <0 74 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; #gpio-cells = <2>; ngpios = <32>; @@ -125,7 +214,8 @@ gpio4: gpio@e0050200 { compatible = "renesas,em-gio"; reg = <0xe0050200 0x2c>, <0xe0050240 0x20>; - interrupts = <0 75 0>, <0 76 0>; + interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>, + <0 76 IRQ_TYPE_LEVEL_HIGH>; gpio-controller; #gpio-cells = <2>; ngpios = <31>; diff --git a/arch/arm/boot/dts/exynos4.dtsi b/arch/arm/boot/dts/exynos4.dtsi index a73eeb5..08452e1 100644 --- a/arch/arm/boot/dts/exynos4.dtsi +++ b/arch/arm/boot/dts/exynos4.dtsi @@ -85,21 +85,21 @@ reg = <0x10023CE0 0x20>; }; - gic:interrupt-controller@10490000 { + gic: interrupt-controller@10490000 { compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; interrupt-controller; reg = <0x10490000 0x1000>, <0x10480000 0x100>; }; - combiner:interrupt-controller@10440000 { + combiner: interrupt-controller@10440000 { compatible = "samsung,exynos4210-combiner"; #interrupt-cells = <2>; interrupt-controller; reg = <0x10440000 0x1000>; }; - sys_reg: sysreg { + sys_reg: syscon@10010000 { compatible = "samsung,exynos4-sysreg", "syscon"; reg = <0x10010000 0x400>; }; diff --git a/arch/arm/boot/dts/exynos4210.dtsi b/arch/arm/boot/dts/exynos4210.dtsi index 057d682..48ecd7a 100644 --- a/arch/arm/boot/dts/exynos4210.dtsi +++ b/arch/arm/boot/dts/exynos4210.dtsi @@ -36,11 +36,11 @@ reg = <0x10023CA0 0x20>; }; - gic:interrupt-controller@10490000 { + gic: interrupt-controller@10490000 { cpu-offset = <0x8000>; }; - combiner:interrupt-controller@10440000 { + combiner: interrupt-controller@10440000 { samsung,combiner-nr = <16>; interrupts = <0 0 0>, <0 1 0>, <0 2 0>, <0 3 0>, <0 4 0>, <0 5 0>, <0 6 0>, <0 7 0>, @@ -51,24 +51,21 @@ mct@10050000 { compatible = "samsung,exynos4210-mct"; reg = <0x10050000 0x800>; - interrupt-controller; - #interrups-cells = <2>; interrupt-parent = <&mct_map>; - interrupts = <0 0>, <1 0>, <2 0>, <3 0>, - <4 0>, <5 0>; + interrupts = <0>, <1>, <2>, <3>, <4>, <5>; clocks = <&clock 3>, <&clock 344>; clock-names = "fin_pll", "mct"; mct_map: mct-map { - #interrupt-cells = <2>; + #interrupt-cells = <1>; #address-cells = <0>; #size-cells = <0>; - interrupt-map = <0x0 0 &gic 0 57 0>, - <0x1 0 &gic 0 69 0>, - <0x2 0 &combiner 12 6>, - <0x3 0 &combiner 12 7>, - <0x4 0 &gic 0 42 0>, - <0x5 0 &gic 0 48 0>; + interrupt-map = <0 &gic 0 57 0>, + <1 &gic 0 69 0>, + <2 &combiner 12 6>, + <3 &combiner 12 7>, + <4 &gic 0 42 0>, + <5 &gic 0 48 0>; }; }; diff --git a/arch/arm/boot/dts/exynos4212.dtsi b/arch/arm/boot/dts/exynos4212.dtsi index 6f34d7f..94a43f9 100644 --- a/arch/arm/boot/dts/exynos4212.dtsi +++ b/arch/arm/boot/dts/exynos4212.dtsi @@ -22,7 +22,7 @@ / { compatible = "samsung,exynos4212"; - gic:interrupt-controller@10490000 { + gic: interrupt-controller@10490000 { cpu-offset = <0x8000>; }; @@ -34,26 +34,4 @@ <0 12 0>, <0 13 0>, <0 14 0>, <0 15 0>, <0 107 0>, <0 108 0>; }; - - mct@10050000 { - compatible = "samsung,exynos4412-mct"; - reg = <0x10050000 0x800>; - interrupt-controller; - #interrups-cells = <2>; - interrupt-parent = <&mct_map>; - interrupts = <0 0>, <1 0>, <2 0>, <3 0>, - <4 0>, <5 0>; - - mct_map: mct-map { - #interrupt-cells = <2>; - #address-cells = <0>; - #size-cells = <0>; - interrupt-map = <0x0 0 &gic 0 57 0>, - <0x1 0 &combiner 12 5>, - <0x2 0 &combiner 12 6>, - <0x3 0 &combiner 12 7>, - <0x4 0 &gic 1 12 0>, - <0x5 0 &gic 1 12 0>; - }; - }; }; diff --git a/arch/arm/boot/dts/exynos4412-tiny4412.dts b/arch/arm/boot/dts/exynos4412-tiny4412.dts new file mode 100644 index 0000000..0a98312 --- /dev/null +++ b/arch/arm/boot/dts/exynos4412-tiny4412.dts @@ -0,0 +1,93 @@ +/* + * FriendlyARM's Exynos4412 based TINY4412 board device tree source + * + * Copyright (c) 2013 Alex Ling <kasimling@gmail.com> + * + * Device tree source file for FriendlyARM's TINY4412 board which is based on + * Samsung's Exynos4412 SoC. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/dts-v1/; +#include "exynos4412.dtsi" + +/ { + model = "FriendlyARM TINY4412 board based on Exynos4412"; + compatible = "friendlyarm,tiny4412", "samsung,exynos4412"; + + memory { + reg = <0x40000000 0x40000000>; + }; + + leds { + compatible = "gpio-leds"; + + led1 { + label = "led1"; + gpios = <&gpm4 0 1>; + default-state = "off"; + linux,default-trigger = "heartbeat"; + }; + + led2 { + label = "led2"; + gpios = <&gpm4 1 1>; + default-state = "off"; + }; + + led3 { + label = "led3"; + gpios = <&gpm4 2 1>; + default-state = "off"; + }; + + led4 { + label = "led4"; + gpios = <&gpm4 3 1>; + default-state = "off"; + linux,default-trigger = "mmc0"; + }; + }; + + rtc@10070000 { + status = "okay"; + }; + + sdhci@12530000 { + bus-width = <4>; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; + pinctrl-names = "default"; + status = "okay"; + }; + + serial@13800000 { + status = "okay"; + }; + + serial@13810000 { + status = "okay"; + }; + + serial@13820000 { + status = "okay"; + }; + + serial@13830000 { + status = "okay"; + }; + + fixed-rate-clocks { + xxti { + compatible = "samsung,clock-xxti"; + clock-frequency = <0>; + }; + + xusbxti { + compatible = "samsung,clock-xusbxti"; + clock-frequency = <24000000>; + }; + }; +}; diff --git a/arch/arm/boot/dts/exynos4412.dtsi b/arch/arm/boot/dts/exynos4412.dtsi index 85812bd..87b339c 100644 --- a/arch/arm/boot/dts/exynos4412.dtsi +++ b/arch/arm/boot/dts/exynos4412.dtsi @@ -22,7 +22,7 @@ / { compatible = "samsung,exynos4412"; - gic:interrupt-controller@10490000 { + gic: interrupt-controller@10490000 { cpu-offset = <0x4000>; }; @@ -35,30 +35,4 @@ <0 107 0>, <0 108 0>, <0 48 0>, <0 42 0>; }; - mct@10050000 { - compatible = "samsung,exynos4412-mct"; - reg = <0x10050000 0x800>; - interrupt-controller; - #interrups-cells = <2>; - interrupt-parent = <&mct_map>; - interrupts = <0 0>, <1 0>, <2 0>, <3 0>, - <4 0>, <5 0>, <6 0>, <7 0>; - clocks = <&clock 3>, <&clock 344>; - clock-names = "fin_pll", "mct"; - - mct_map: mct-map { - #interrupt-cells = <2>; - #address-cells = <0>; - #size-cells = <0>; - interrupt-map = <0x0 0 &gic 0 57 0>, - <0x1 0 &combiner 12 5>, - <0x2 0 &combiner 12 6>, - <0x3 0 &combiner 12 7>, - <0x4 0 &gic 1 12 0>, - <0x5 0 &gic 1 12 0>, - <0x6 0 &gic 1 12 0>, - <0x7 0 &gic 1 12 0>; - }; - }; - }; diff --git a/arch/arm/boot/dts/exynos4x12.dtsi b/arch/arm/boot/dts/exynos4x12.dtsi index 1917c82..5c412aa 100644 --- a/arch/arm/boot/dts/exynos4x12.dtsi +++ b/arch/arm/boot/dts/exynos4x12.dtsi @@ -42,6 +42,26 @@ #clock-cells = <1>; }; + mct@10050000 { + compatible = "samsung,exynos4412-mct"; + reg = <0x10050000 0x800>; + interrupt-parent = <&mct_map>; + interrupts = <0>, <1>, <2>, <3>, <4>; + clocks = <&clock 3>, <&clock 344>; + clock-names = "fin_pll", "mct"; + + mct_map: mct-map { + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = <0 &gic 0 57 0>, + <1 &combiner 12 5>, + <2 &combiner 12 6>, + <3 &combiner 12 7>, + <4 &gic 1 12 0>; + }; + }; + pinctrl_0: pinctrl@11400000 { compatible = "samsung,exynos4x12-pinctrl"; reg = <0x11400000 0x1000>; diff --git a/arch/arm/boot/dts/exynos5.dtsi b/arch/arm/boot/dts/exynos5.dtsi index 074739d..258dca4 100644 --- a/arch/arm/boot/dts/exynos5.dtsi +++ b/arch/arm/boot/dts/exynos5.dtsi @@ -23,7 +23,7 @@ reg = <0x10000000 0x100>; }; - combiner:interrupt-controller@10440000 { + combiner: interrupt-controller@10440000 { compatible = "samsung,exynos4210-combiner"; #interrupt-cells = <2>; interrupt-controller; @@ -39,7 +39,7 @@ <0 28 0>, <0 29 0>, <0 30 0>, <0 31 0>; }; - gic:interrupt-controller@10481000 { + gic: interrupt-controller@10481000 { compatible = "arm,cortex-a15-gic", "arm,cortex-a9-gic"; #interrupt-cells = <3>; interrupt-controller; @@ -50,27 +50,6 @@ interrupts = <1 9 0xf04>; }; - dwmmc_0: dwmmc0@12200000 { - compatible = "samsung,exynos5250-dw-mshc"; - interrupts = <0 75 0>; - #address-cells = <1>; - #size-cells = <0>; - }; - - dwmmc_1: dwmmc1@12210000 { - compatible = "samsung,exynos5250-dw-mshc"; - interrupts = <0 76 0>; - #address-cells = <1>; - #size-cells = <0>; - }; - - dwmmc_2: dwmmc2@12220000 { - compatible = "samsung,exynos5250-dw-mshc"; - interrupts = <0 77 0>; - #address-cells = <1>; - #size-cells = <0>; - }; - serial@12C00000 { compatible = "samsung,exynos4210-uart"; reg = <0x12C00000 0x100>; diff --git a/arch/arm/boot/dts/exynos5250-arndale.dts b/arch/arm/boot/dts/exynos5250-arndale.dts index bbfb23f..b42e658 100644 --- a/arch/arm/boot/dts/exynos5250-arndale.dts +++ b/arch/arm/boot/dts/exynos5250-arndale.dts @@ -34,6 +34,7 @@ samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <20000>; samsung,i2c-slave-addr = <0x66>; + status = "okay"; s5m8767_pmic@66 { compatible = "samsung,s5m8767-pmic"; @@ -266,7 +267,7 @@ buck2_reg: BUCK2 { regulator-name = "vdd_arm"; - regulator-min-microvolt = <925000>; + regulator-min-microvolt = <912500>; regulator-max-microvolt = <1300000>; regulator-always-on; regulator-boot-on; @@ -321,11 +322,9 @@ }; }; - i2c@12C70000 { - status = "disabled"; - }; - i2c@12C80000 { + status = "okay"; + samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <66000>; samsung,i2c-slave-addr = <0x50>; @@ -337,7 +336,10 @@ }; i2c@12C90000 { + status = "okay"; + wm1811a@1a { + compatible = "wlf,wm1811"; reg = <0x1a>; @@ -355,23 +357,9 @@ }; }; - i2c@12CA0000 { - status = "disabled"; - }; - - i2c@12CB0000 { - status = "disabled"; - }; - - i2c@12CC0000 { - status = "disabled"; - }; - - i2c@12CD0000 { - status = "disabled"; - }; - i2c@12CE0000 { + status = "okay"; + samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <66000>; samsung,i2c-slave-addr = <0x38>; @@ -382,15 +370,11 @@ }; }; - i2c@121D0000 { - status = "disabled"; - }; - - dwmmc_0: dwmmc0@12200000 { + mmc_0: mmc@12200000 { + status = "okay"; num-slots = <1>; supports-highspeed; broken-cd; - fifo-depth = <0x80>; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <2 3>; @@ -405,14 +389,10 @@ }; }; - dwmmc_1: dwmmc1@12210000 { - status = "disabled"; - }; - - dwmmc_2: dwmmc2@12220000 { + mmc_2: mmc@12220000 { + status = "okay"; num-slots = <1>; supports-highspeed; - fifo-depth = <0x80>; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <2 3>; @@ -428,26 +408,10 @@ }; }; - dwmmc_3: dwmmc3@12230000 { - status = "disabled"; - }; - i2s0: i2s@03830000 { status = "okay"; }; - spi_0: spi@12d20000 { - status = "disabled"; - }; - - spi_1: spi@12d30000 { - status = "disabled"; - }; - - spi_2: spi@12d40000 { - status = "disabled"; - }; - gpio_keys { compatible = "gpio-keys"; diff --git a/arch/arm/boot/dts/cros5250-common.dtsi b/arch/arm/boot/dts/exynos5250-cros-common.dtsi index 9b186ac..9a61494 100644 --- a/arch/arm/boot/dts/cros5250-common.dtsi +++ b/arch/arm/boot/dts/exynos5250-cros-common.dtsi @@ -37,6 +37,7 @@ }; i2c@12C60000 { + status = "okay"; samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <378000>; @@ -185,6 +186,7 @@ }; i2c@12C70000 { + status = "okay"; samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <378000>; @@ -198,6 +200,7 @@ }; i2c@12C80000 { + status = "okay"; samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <66000>; @@ -208,30 +211,31 @@ }; i2c@12C90000 { + status = "okay"; samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <66000>; }; i2c@12CA0000 { + status = "okay"; samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <66000>; }; i2c@12CB0000 { + status = "okay"; samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <66000>; }; - i2c@12CC0000 { - status = "disabled"; - }; - i2c@12CD0000 { + status = "okay"; samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <66000>; }; i2c@12CE0000 { + status = "okay"; samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <378000>; @@ -241,11 +245,10 @@ }; }; - dwmmc0@12200000 { + mmc@12200000 { num-slots = <1>; supports-highspeed; broken-cd; - fifo-depth = <0x80>; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <2 3>; @@ -259,14 +262,9 @@ }; }; - dwmmc1@12210000 { - status = "disabled"; - }; - - dwmmc2@12220000 { + mmc@12220000 { num-slots = <1>; supports-highspeed; - fifo-depth = <0x80>; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <2 3>; @@ -281,11 +279,10 @@ }; }; - dwmmc3@12230000 { + mmc@12230000 { num-slots = <1>; supports-highspeed; broken-cd; - fifo-depth = <0x80>; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <2 3>; @@ -298,19 +295,12 @@ }; }; - spi_0: spi@12d20000 { - status = "disabled"; - }; - spi_1: spi@12d30000 { + status = "okay"; samsung,spi-src-clk = <0>; num-cs = <1>; }; - spi_2: spi@12d40000 { - status = "disabled"; - }; - hdmi { hpd-gpio = <&gpx3 7 0>; }; diff --git a/arch/arm/boot/dts/exynos5250-smdk5250.dts b/arch/arm/boot/dts/exynos5250-smdk5250.dts index f86d567..3e69837 100644 --- a/arch/arm/boot/dts/exynos5250-smdk5250.dts +++ b/arch/arm/boot/dts/exynos5250-smdk5250.dts @@ -30,6 +30,7 @@ i2c@12C60000 { samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <20000>; + status = "okay"; eeprom@50 { compatible = "samsung,s524ad0xd1"; @@ -37,7 +38,7 @@ }; }; - vdd:fixed-regulator@0 { + vdd: fixed-regulator@0 { compatible = "regulator-fixed"; regulator-name = "vdd-supply"; regulator-min-microvolt = <1800000>; @@ -45,7 +46,7 @@ regulator-always-on; }; - dbvdd:fixed-regulator@1 { + dbvdd: fixed-regulator@1 { compatible = "regulator-fixed"; regulator-name = "dbvdd-supply"; regulator-min-microvolt = <3300000>; @@ -53,7 +54,7 @@ regulator-always-on; }; - spkvdd:fixed-regulator@2 { + spkvdd: fixed-regulator@2 { compatible = "regulator-fixed"; regulator-name = "spkvdd-supply"; regulator-min-microvolt = <5000000>; @@ -64,6 +65,7 @@ i2c@12C70000 { samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <20000>; + status = "okay"; eeprom@51 { compatible = "samsung,s524ad0xd1"; @@ -77,6 +79,9 @@ gpio-controller; #gpio-cells = <2>; + clocks = <&codec_mclk>; + clock-names = "MCLK1"; + AVDD2-supply = <&vdd>; CPVDD-supply = <&vdd>; DBVDD-supply = <&dbvdd>; @@ -89,6 +94,7 @@ samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <40000>; samsung,i2c-slave-addr = <0x38>; + status = "okay"; sata-phy { compatible = "samsung,sata-phy"; @@ -103,6 +109,7 @@ i2c@12C80000 { samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <66000>; + status = "okay"; hdmiddc@50 { compatible = "samsung,exynos4210-hdmiddc"; @@ -110,29 +117,10 @@ }; }; - i2c@12C90000 { - status = "disabled"; - }; - - i2c@12CA0000 { - status = "disabled"; - }; - - i2c@12CB0000 { - status = "disabled"; - }; - - i2c@12CC0000 { - status = "disabled"; - }; - - i2c@12CD0000 { - status = "disabled"; - }; - i2c@12CE0000 { samsung,i2c-sda-delay = <100>; samsung,i2c-max-bus-freq = <66000>; + status = "okay"; hdmiphy@38 { compatible = "samsung,exynos4212-hdmiphy"; @@ -140,11 +128,11 @@ }; }; - dwmmc0@12200000 { + mmc@12200000 { + status = "okay"; num-slots = <1>; supports-highspeed; broken-cd; - fifo-depth = <0x80>; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <2 3>; @@ -158,14 +146,10 @@ }; }; - dwmmc1@12210000 { - status = "disabled"; - }; - - dwmmc2@12220000 { + mmc@12220000 { + status = "okay"; num-slots = <1>; supports-highspeed; - fifo-depth = <0x80>; card-detect-delay = <200>; samsung,dw-mshc-ciu-div = <3>; samsung,dw-mshc-sdr-timing = <2 3>; @@ -180,15 +164,13 @@ }; }; - dwmmc3@12230000 { - status = "disabled"; - }; - spi_0: spi@12d20000 { status = "disabled"; }; spi_1: spi@12d30000 { + status = "okay"; + w25q80bw@0 { #address-cells = <1>; #size-cells = <1>; @@ -214,10 +196,6 @@ }; }; - spi_2: spi@12d40000 { - status = "disabled"; - }; - hdmi { hpd-gpio = <&gpx3 7 0>; }; @@ -279,5 +257,11 @@ compatible = "samsung,clock-xxti"; clock-frequency = <24000000>; }; + + codec_mclk: codec-mclk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <16934000>; + }; }; }; diff --git a/arch/arm/boot/dts/exynos5250-snow.dts b/arch/arm/boot/dts/exynos5250-snow.dts index c65f52a..7e45eea 100644 --- a/arch/arm/boot/dts/exynos5250-snow.dts +++ b/arch/arm/boot/dts/exynos5250-snow.dts @@ -10,7 +10,7 @@ /dts-v1/; #include "exynos5250.dtsi" -#include "cros5250-common.dtsi" +#include "exynos5250-cros-common.dtsi" / { model = "Google Snow"; @@ -172,11 +172,20 @@ }; }; + mmc@12200000 { + status = "okay"; + }; + + mmc@12220000 { + status = "okay"; + }; + /* * On Snow we've got SIP WiFi and so can keep drive strengths low to * reduce EMI. */ - dwmmc3@12230000 { + mmc@12230000 { + status = "okay"; slot@0 { pinctrl-names = "default"; pinctrl-0 = <&sd3_clk &sd3_cmd &sd3_bus4>; diff --git a/arch/arm/boot/dts/exynos5250.dtsi b/arch/arm/boot/dts/exynos5250.dtsi index 6feaa1c..587dd3e 100644 --- a/arch/arm/boot/dts/exynos5250.dtsi +++ b/arch/arm/boot/dts/exynos5250.dtsi @@ -33,10 +33,10 @@ gsc1 = &gsc_1; gsc2 = &gsc_2; gsc3 = &gsc_3; - mshc0 = &dwmmc_0; - mshc1 = &dwmmc_1; - mshc2 = &dwmmc_2; - mshc3 = &dwmmc_3; + mshc0 = &mmc_0; + mshc1 = &mmc_1; + mshc2 = &mmc_2; + mshc3 = &mmc_3; i2c0 = &i2c_0; i2c1 = &i2c_1; i2c2 = &i2c_2; @@ -244,6 +244,7 @@ clock-names = "i2c"; pinctrl-names = "default"; pinctrl-0 = <&i2c0_bus>; + status = "disabled"; }; i2c_1: i2c@12C70000 { @@ -256,6 +257,7 @@ clock-names = "i2c"; pinctrl-names = "default"; pinctrl-0 = <&i2c1_bus>; + status = "disabled"; }; i2c_2: i2c@12C80000 { @@ -268,6 +270,7 @@ clock-names = "i2c"; pinctrl-names = "default"; pinctrl-0 = <&i2c2_bus>; + status = "disabled"; }; i2c_3: i2c@12C90000 { @@ -280,6 +283,7 @@ clock-names = "i2c"; pinctrl-names = "default"; pinctrl-0 = <&i2c3_bus>; + status = "disabled"; }; i2c_4: i2c@12CA0000 { @@ -292,6 +296,7 @@ clock-names = "i2c"; pinctrl-names = "default"; pinctrl-0 = <&i2c4_bus>; + status = "disabled"; }; i2c_5: i2c@12CB0000 { @@ -304,6 +309,7 @@ clock-names = "i2c"; pinctrl-names = "default"; pinctrl-0 = <&i2c5_bus>; + status = "disabled"; }; i2c_6: i2c@12CC0000 { @@ -316,6 +322,7 @@ clock-names = "i2c"; pinctrl-names = "default"; pinctrl-0 = <&i2c6_bus>; + status = "disabled"; }; i2c_7: i2c@12CD0000 { @@ -328,6 +335,7 @@ clock-names = "i2c"; pinctrl-names = "default"; pinctrl-0 = <&i2c7_bus>; + status = "disabled"; }; i2c_8: i2c@12CE0000 { @@ -338,6 +346,7 @@ #size-cells = <0>; clocks = <&clock 302>; clock-names = "i2c"; + status = "disabled"; }; i2c@121D0000 { @@ -347,10 +356,12 @@ #size-cells = <0>; clocks = <&clock 288>; clock-names = "i2c"; + status = "disabled"; }; spi_0: spi@12d20000 { compatible = "samsung,exynos4210-spi"; + status = "disabled"; reg = <0x12d20000 0x100>; interrupts = <0 66 0>; dmas = <&pdma0 5 @@ -366,6 +377,7 @@ spi_1: spi@12d30000 { compatible = "samsung,exynos4210-spi"; + status = "disabled"; reg = <0x12d30000 0x100>; interrupts = <0 67 0>; dmas = <&pdma1 5 @@ -381,6 +393,7 @@ spi_2: spi@12d40000 { compatible = "samsung,exynos4210-spi"; + status = "disabled"; reg = <0x12d40000 0x100>; interrupts = <0 68 0>; dmas = <&pdma0 7 @@ -394,25 +407,43 @@ pinctrl-0 = <&spi2_bus>; }; - dwmmc_0: dwmmc0@12200000 { + mmc_0: mmc@12200000 { + compatible = "samsung,exynos5250-dw-mshc"; + interrupts = <0 75 0>; + #address-cells = <1>; + #size-cells = <0>; reg = <0x12200000 0x1000>; clocks = <&clock 280>, <&clock 139>; clock-names = "biu", "ciu"; + fifo-depth = <0x80>; + status = "disabled"; }; - dwmmc_1: dwmmc1@12210000 { + mmc_1: mmc@12210000 { + compatible = "samsung,exynos5250-dw-mshc"; + interrupts = <0 76 0>; + #address-cells = <1>; + #size-cells = <0>; reg = <0x12210000 0x1000>; clocks = <&clock 281>, <&clock 140>; clock-names = "biu", "ciu"; + fifo-depth = <0x80>; + status = "disabled"; }; - dwmmc_2: dwmmc2@12220000 { + mmc_2: mmc@12220000 { + compatible = "samsung,exynos5250-dw-mshc"; + interrupts = <0 77 0>; + #address-cells = <1>; + #size-cells = <0>; reg = <0x12220000 0x1000>; clocks = <&clock 282>, <&clock 141>; clock-names = "biu", "ciu"; + fifo-depth = <0x80>; + status = "disabled"; }; - dwmmc_3: dwmmc3@12230000 { + mmc_3: mmc@12230000 { compatible = "samsung,exynos5250-dw-mshc"; reg = <0x12230000 0x1000>; interrupts = <0 78 0>; @@ -420,6 +451,8 @@ #size-cells = <0>; clocks = <&clock 283>, <&clock 142>; clock-names = "biu", "ciu"; + fifo-depth = <0x80>; + status = "disabled"; }; i2s0: i2s@03830000 { @@ -528,6 +561,15 @@ }; }; + pwm: pwm@12dd0000 { + compatible = "samsung,exynos4210-pwm"; + reg = <0x12dd0000 0x100>; + samsung,pwm-outputs = <0>, <1>, <2>, <3>; + #pwm-cells = <3>; + clocks = <&clock 311>; + clock-names = "timers"; + }; + amba { #address-cells = <1>; #size-cells = <1>; diff --git a/arch/arm/boot/dts/exynos5420-arndale-octa.dts b/arch/arm/boot/dts/exynos5420-arndale-octa.dts new file mode 100644 index 0000000..7340745 --- /dev/null +++ b/arch/arm/boot/dts/exynos5420-arndale-octa.dts @@ -0,0 +1,66 @@ +/* + * Samsung's Exynos5420 based Arndale Octa board device tree source + * + * Copyright (c) 2013 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/dts-v1/; +#include "exynos5420.dtsi" + +/ { + model = "Insignal Arndale Octa evaluation board based on EXYNOS5420"; + compatible = "insignal,arndale-octa", "samsung,exynos5420"; + + memory { + reg = <0x20000000 0x80000000>; + }; + + chosen { + bootargs = "console=ttySAC3,115200"; + }; + + fixed-rate-clocks { + oscclk { + compatible = "samsung,exynos5420-oscclk"; + clock-frequency = <24000000>; + }; + }; + + mmc@12200000 { + status = "okay"; + broken-cd; + supports-highspeed; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <0 4>; + samsung,dw-mshc-ddr-timing = <0 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>; + + slot@0 { + reg = <0>; + bus-width = <8>; + }; + }; + + mmc@12220000 { + status = "okay"; + supports-highspeed; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; + + slot@0 { + reg = <0>; + bus-width = <4>; + }; + }; +}; diff --git a/arch/arm/boot/dts/exynos5420-smdk5420.dts b/arch/arm/boot/dts/exynos5420-smdk5420.dts index 79524c7..fb5a1e2 100644 --- a/arch/arm/boot/dts/exynos5420-smdk5420.dts +++ b/arch/arm/boot/dts/exynos5420-smdk5420.dts @@ -31,6 +31,39 @@ }; }; + mmc@12200000 { + status = "okay"; + broken-cd; + supports-highspeed; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <0 4>; + samsung,dw-mshc-ddr-timing = <0 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_bus4 &sd0_bus8>; + + slot@0 { + reg = <0>; + bus-width = <8>; + }; + }; + + mmc@12220000 { + status = "okay"; + supports-highspeed; + card-detect-delay = <200>; + samsung,dw-mshc-ciu-div = <3>; + samsung,dw-mshc-sdr-timing = <2 3>; + samsung,dw-mshc-ddr-timing = <1 2>; + pinctrl-names = "default"; + pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_cd &sd2_bus4>; + + slot@0 { + reg = <0>; + bus-width = <4>; + }; + }; + dp-controller@145B0000 { pinctrl-names = "default"; pinctrl-0 = <&dp_hpd>; diff --git a/arch/arm/boot/dts/exynos5420.dtsi b/arch/arm/boot/dts/exynos5420.dtsi index 09aa06c..11dd202 100644 --- a/arch/arm/boot/dts/exynos5420.dtsi +++ b/arch/arm/boot/dts/exynos5420.dtsi @@ -22,6 +22,9 @@ compatible = "samsung,exynos5420"; aliases { + mshc0 = &mmc_0; + mshc1 = &mmc_1; + mshc2 = &mmc_2; pinctrl0 = &pinctrl_0; pinctrl1 = &pinctrl_1; pinctrl2 = &pinctrl_2; @@ -31,6 +34,18 @@ i2c1 = &i2c_1; i2c2 = &i2c_2; i2c3 = &i2c_3; + i2c4 = &hsi2c_4; + i2c5 = &hsi2c_5; + i2c6 = &hsi2c_6; + i2c7 = &hsi2c_7; + i2c8 = &hsi2c_8; + i2c9 = &hsi2c_9; + i2c10 = &hsi2c_10; + gsc0 = &gsc_0; + gsc1 = &gsc_1; + spi0 = &spi_0; + spi1 = &spi_1; + spi2 = &spi_2; }; cpus { @@ -64,6 +79,34 @@ reg = <0x3>; clock-frequency = <1800000000>; }; + + cpu4: cpu@100 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x100>; + clock-frequency = <1000000000>; + }; + + cpu5: cpu@101 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x101>; + clock-frequency = <1000000000>; + }; + + cpu6: cpu@102 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x102>; + clock-frequency = <1000000000>; + }; + + cpu7: cpu@103 { + device_type = "cpu"; + compatible = "arm,cortex-a7"; + reg = <0x103>; + clock-frequency = <1000000000>; + }; }; clock: clock-controller@10010000 { @@ -88,13 +131,50 @@ clock-names = "mfc"; }; + mmc_0: mmc@12200000 { + compatible = "samsung,exynos5420-dw-mshc-smu"; + interrupts = <0 75 0>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x12200000 0x2000>; + clocks = <&clock 351>, <&clock 132>; + clock-names = "biu", "ciu"; + fifo-depth = <0x40>; + status = "disabled"; + }; + + mmc_1: mmc@12210000 { + compatible = "samsung,exynos5420-dw-mshc-smu"; + interrupts = <0 76 0>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x12210000 0x2000>; + clocks = <&clock 352>, <&clock 133>; + clock-names = "biu", "ciu"; + fifo-depth = <0x40>; + status = "disabled"; + }; + + mmc_2: mmc@12220000 { + compatible = "samsung,exynos5420-dw-mshc"; + interrupts = <0 77 0>; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x12220000 0x1000>; + clocks = <&clock 353>, <&clock 134>; + clock-names = "biu", "ciu"; + fifo-depth = <0x40>; + status = "disabled"; + }; + mct@101C0000 { compatible = "samsung,exynos4210-mct"; reg = <0x101C0000 0x800>; interrupt-controller; #interrups-cells = <1>; interrupt-parent = <&mct_map>; - interrupts = <0>, <1>, <2>, <3>, <4>, <5>, <6>, <7>; + interrupts = <0>, <1>, <2>, <3>, <4>, <5>, <6>, <7>, + <8>, <9>, <10>, <11>; clocks = <&clock 1>, <&clock 315>; clock-names = "fin_pll", "mct"; @@ -109,7 +189,11 @@ <4 &gic 0 120 0>, <5 &gic 0 121 0>, <6 &gic 0 122 0>, - <7 &gic 0 123 0>; + <7 &gic 0 123 0>, + <8 &gic 0 128 0>, + <9 &gic 0 129 0>, + <10 &gic 0 130 0>, + <11 &gic 0 131 0>; }; }; @@ -190,6 +274,106 @@ status = "okay"; }; + amba { + #address-cells = <1>; + #size-cells = <1>; + compatible = "arm,amba-bus"; + interrupt-parent = <&gic>; + ranges; + + pdma0: pdma@121A0000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x121A0000 0x1000>; + interrupts = <0 34 0>; + clocks = <&clock 362>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + }; + + pdma1: pdma@121B0000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x121B0000 0x1000>; + interrupts = <0 35 0>; + clocks = <&clock 363>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <32>; + }; + + mdma0: mdma@10800000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x10800000 0x1000>; + interrupts = <0 33 0>; + clocks = <&clock 473>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <1>; + }; + + mdma1: mdma@11C10000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x11C10000 0x1000>; + interrupts = <0 124 0>; + clocks = <&clock 442>; + clock-names = "apb_pclk"; + #dma-cells = <1>; + #dma-channels = <8>; + #dma-requests = <1>; + }; + }; + + spi_0: spi@12d20000 { + compatible = "samsung,exynos4210-spi"; + reg = <0x12d20000 0x100>; + interrupts = <0 66 0>; + dmas = <&pdma0 5 + &pdma0 4>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&spi0_bus>; + clocks = <&clock 271>, <&clock 135>; + clock-names = "spi", "spi_busclk0"; + status = "disabled"; + }; + + spi_1: spi@12d30000 { + compatible = "samsung,exynos4210-spi"; + reg = <0x12d30000 0x100>; + interrupts = <0 67 0>; + dmas = <&pdma1 5 + &pdma1 4>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&spi1_bus>; + clocks = <&clock 272>, <&clock 136>; + clock-names = "spi", "spi_busclk0"; + status = "disabled"; + }; + + spi_2: spi@12d40000 { + compatible = "samsung,exynos4210-spi"; + reg = <0x12d40000 0x100>; + interrupts = <0 68 0>; + dmas = <&pdma0 7 + &pdma0 6>; + dma-names = "tx", "rx"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&spi2_bus>; + clocks = <&clock 273>, <&clock 137>; + clock-names = "spi", "spi_busclk0"; + status = "disabled"; + }; + serial@12C00000 { clocks = <&clock 257>, <&clock 128>; clock-names = "uart", "clk_uart_baud0"; @@ -210,6 +394,15 @@ clock-names = "uart", "clk_uart_baud0"; }; + pwm: pwm@12dd0000 { + compatible = "samsung,exynos4210-pwm"; + reg = <0x12dd0000 0x100>; + samsung,pwm-outputs = <0>, <1>, <2>, <3>; + #pwm-cells = <3>; + clocks = <&clock 279>; + clock-names = "timers"; + }; + dp_phy: video-phy@10040728 { compatible = "samsung,exynos5250-dp-video-phy"; reg = <0x10040728 4>; @@ -292,6 +485,97 @@ status = "disabled"; }; + hsi2c_4: i2c@12CA0000 { + compatible = "samsung,exynos5-hsi2c"; + reg = <0x12CA0000 0x1000>; + interrupts = <0 60 0>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c4_hs_bus>; + clocks = <&clock 265>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_5: i2c@12CB0000 { + compatible = "samsung,exynos5-hsi2c"; + reg = <0x12CB0000 0x1000>; + interrupts = <0 61 0>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c5_hs_bus>; + clocks = <&clock 266>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_6: i2c@12CC0000 { + compatible = "samsung,exynos5-hsi2c"; + reg = <0x12CC0000 0x1000>; + interrupts = <0 62 0>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c6_hs_bus>; + clocks = <&clock 267>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_7: i2c@12CD0000 { + compatible = "samsung,exynos5-hsi2c"; + reg = <0x12CD0000 0x1000>; + interrupts = <0 63 0>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c7_hs_bus>; + clocks = <&clock 268>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_8: i2c@12E00000 { + compatible = "samsung,exynos5-hsi2c"; + reg = <0x12E00000 0x1000>; + interrupts = <0 87 0>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c8_hs_bus>; + clocks = <&clock 281>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_9: i2c@12E10000 { + compatible = "samsung,exynos5-hsi2c"; + reg = <0x12E10000 0x1000>; + interrupts = <0 88 0>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c9_hs_bus>; + clocks = <&clock 282>; + clock-names = "hsi2c"; + status = "disabled"; + }; + + hsi2c_10: i2c@12E20000 { + compatible = "samsung,exynos5-hsi2c"; + reg = <0x12E20000 0x1000>; + interrupts = <0 203 0>; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&i2c10_hs_bus>; + clocks = <&clock 283>; + clock-names = "hsi2c"; + status = "disabled"; + }; + hdmi@14530000 { compatible = "samsung,exynos4212-hdmi"; reg = <0x14530000 0x70000>; @@ -310,4 +594,62 @@ clocks = <&clock 431>, <&clock 143>; clock-names = "mixer", "sclk_hdmi"; }; + + gsc_0: video-scaler@13e00000 { + compatible = "samsung,exynos5-gsc"; + reg = <0x13e00000 0x1000>; + interrupts = <0 85 0>; + clocks = <&clock 465>; + clock-names = "gscl"; + samsung,power-domain = <&gsc_pd>; + }; + + gsc_1: video-scaler@13e10000 { + compatible = "samsung,exynos5-gsc"; + reg = <0x13e10000 0x1000>; + interrupts = <0 86 0>; + clocks = <&clock 466>; + clock-names = "gscl"; + samsung,power-domain = <&gsc_pd>; + }; + + tmu_cpu0: tmu@10060000 { + compatible = "samsung,exynos5420-tmu"; + reg = <0x10060000 0x100>; + interrupts = <0 65 0>; + clocks = <&clock 318>; + clock-names = "tmu_apbif"; + }; + + tmu_cpu1: tmu@10064000 { + compatible = "samsung,exynos5420-tmu"; + reg = <0x10064000 0x100>; + interrupts = <0 183 0>; + clocks = <&clock 318>; + clock-names = "tmu_apbif"; + }; + + tmu_cpu2: tmu@10068000 { + compatible = "samsung,exynos5420-tmu-ext-triminfo"; + reg = <0x10068000 0x100>, <0x1006c000 0x4>; + interrupts = <0 184 0>; + clocks = <&clock 318>, <&clock 318>; + clock-names = "tmu_apbif", "tmu_triminfo_apbif"; + }; + + tmu_cpu3: tmu@1006c000 { + compatible = "samsung,exynos5420-tmu-ext-triminfo"; + reg = <0x1006c000 0x100>, <0x100a0000 0x4>; + interrupts = <0 185 0>; + clocks = <&clock 318>, <&clock 319>; + clock-names = "tmu_apbif", "tmu_triminfo_apbif"; + }; + + tmu_gpu: tmu@100a0000 { + compatible = "samsung,exynos5420-tmu-ext-triminfo"; + reg = <0x100a0000 0x100>, <0x10068000 0x4>; + interrupts = <0 215 0>; + clocks = <&clock 319>, <&clock 318>; + clock-names = "tmu_apbif", "tmu_triminfo_apbif"; + }; }; diff --git a/arch/arm/boot/dts/exynos5440.dtsi b/arch/arm/boot/dts/exynos5440.dtsi index 8da1070..02a0a12 100644 --- a/arch/arm/boot/dts/exynos5440.dtsi +++ b/arch/arm/boot/dts/exynos5440.dtsi @@ -29,7 +29,7 @@ #clock-cells = <1>; }; - gic:interrupt-controller@2E0000 { + gic: interrupt-controller@2E0000 { compatible = "arm,cortex-a15-gic"; #interrupt-cells = <3>; interrupt-controller; diff --git a/arch/arm/boot/dts/integrator.dtsi b/arch/arm/boot/dts/integrator.dtsi index 0f06f86..88e3d477 100644 --- a/arch/arm/boot/dts/integrator.dtsi +++ b/arch/arm/boot/dts/integrator.dtsi @@ -10,6 +10,11 @@ reg = <0x10000000 0x200>; }; + ebi@12000000 { + compatible = "arm,external-bus-interface"; + reg = <0x12000000 0x100>; + }; + timer@13000000 { reg = <0x13000000 0x100>; interrupt-parent = <&pic>; diff --git a/arch/arm/boot/dts/k2hk-evm.dts b/arch/arm/boot/dts/k2hk-evm.dts new file mode 100644 index 0000000..eaefdfe --- /dev/null +++ b/arch/arm/boot/dts/k2hk-evm.dts @@ -0,0 +1,63 @@ +/* + * Copyright 2013 Texas Instruments, Inc. + * + * Keystone 2 Kepler/Hawking EVM device tree + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ +/dts-v1/; + +#include "keystone.dtsi" + +/ { + compatible = "ti,keystone-evm"; + + soc { + clock { + refclksys: refclksys { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <122880000>; + clock-output-names = "refclk-sys"; + }; + + refclkpass: refclkpass { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <122880000>; + clock-output-names = "refclk-pass"; + }; + + refclkarm: refclkarm { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "refclk-arm"; + }; + + refclkddr3a: refclkddr3a { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <100000000>; + clock-output-names = "refclk-ddr3a"; + }; + + refclkddr3b: refclkddr3b { + #clock-cells = <0>; + compatible = "fixed-clock"; + clock-frequency = <100000000>; + clock-output-names = "refclk-ddr3b"; + }; + }; + }; +}; + +&usb_phy { + status = "okay"; +}; + +&usb { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/keystone-clocks.dtsi b/arch/arm/boot/dts/keystone-clocks.dtsi index d6713b1..2363593 100644 --- a/arch/arm/boot/dts/keystone-clocks.dtsi +++ b/arch/arm/boot/dts/keystone-clocks.dtsi @@ -13,17 +13,10 @@ clocks { #size-cells = <1>; ranges; - refclkmain: refclkmain { - #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <122880000>; - clock-output-names = "refclk-main"; - }; - mainpllclk: mainpllclk@2310110 { #clock-cells = <0>; compatible = "ti,keystone,main-pll-clock"; - clocks = <&refclkmain>; + clocks = <&refclksys>; reg = <0x02620350 4>, <0x02310110 4>; reg-names = "control", "multiplier"; fixed-postdiv = <2>; @@ -32,47 +25,43 @@ clocks { papllclk: papllclk@2620358 { #clock-cells = <0>; compatible = "ti,keystone,pll-clock"; - clocks = <&refclkmain>; + clocks = <&refclkpass>; clock-output-names = "pa-pll-clk"; reg = <0x02620358 4>; reg-names = "control"; - fixed-postdiv = <6>; }; - ddr3allclk: ddr3apllclk@2620360 { + ddr3apllclk: ddr3apllclk@2620360 { #clock-cells = <0>; compatible = "ti,keystone,pll-clock"; - clocks = <&refclkmain>; + clocks = <&refclkddr3a>; clock-output-names = "ddr-3a-pll-clk"; reg = <0x02620360 4>; reg-names = "control"; - fixed-postdiv = <6>; }; - ddr3bllclk: ddr3bpllclk@2620368 { + ddr3bpllclk: ddr3bpllclk@2620368 { #clock-cells = <0>; compatible = "ti,keystone,pll-clock"; - clocks = <&refclkmain>; + clocks = <&refclkddr3b>; clock-output-names = "ddr-3b-pll-clk"; reg = <0x02620368 4>; reg-names = "control"; - fixed-postdiv = <6>; }; armpllclk: armpllclk@2620370 { #clock-cells = <0>; compatible = "ti,keystone,pll-clock"; - clocks = <&refclkmain>; + clocks = <&refclkarm>; clock-output-names = "arm-pll-clk"; reg = <0x02620370 4>; reg-names = "control"; - fixed-postdiv = <6>; }; mainmuxclk: mainmuxclk@2310108 { #clock-cells = <0>; compatible = "ti,keystone,pll-mux-clock"; - clocks = <&mainpllclk>, <&refclkmain>; + clocks = <&mainpllclk>, <&refclksys>; reg = <0x02310108 4>; bit-shift = <23>; bit-mask = <1>; @@ -135,6 +124,15 @@ clocks { clock-output-names = "chipclk13"; }; + paclk13: paclk13 { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clocks = <&papllclk>; + clock-div = <3>; + clock-mult = <1>; + clock-output-names = "paclk13"; + }; + chipclk14: chipclk14 { #clock-cells = <0>; compatible = "fixed-factor-clock"; diff --git a/arch/arm/boot/dts/keystone.dts b/arch/arm/boot/dts/keystone.dtsi index 100bdf5..b420290 100644 --- a/arch/arm/boot/dts/keystone.dts +++ b/arch/arm/boot/dts/keystone.dtsi @@ -6,14 +6,12 @@ * published by the Free Software Foundation. */ -/dts-v1/; #include <dt-bindings/interrupt-controller/arm-gic.h> #include "skeleton.dtsi" / { model = "Texas Instruments Keystone 2 SoC"; - compatible = "ti,keystone-evm"; #address-cells = <2>; #size-cells = <2>; interrupt-parent = <&gic>; @@ -64,7 +62,11 @@ #address-cells = <1>; interrupt-controller; reg = <0x0 0x02561000 0x0 0x1000>, - <0x0 0x02562000 0x0 0x2000>; + <0x0 0x02562000 0x0 0x2000>, + <0x0 0x02564000 0x0 0x1000>, + <0x0 0x02566000 0x0 0x2000>; + interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(4) | + IRQ_TYPE_LEVEL_HIGH)>; }; timer { @@ -179,5 +181,32 @@ interrupts = <GIC_SPI 300 IRQ_TYPE_EDGE_RISING>; clocks = <&clkspi>; }; + + usb_phy: usb_phy@2620738 { + compatible = "ti,keystone-usbphy"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x2620738 32>; + status = "disabled"; + }; + + usb: usb@2680000 { + compatible = "ti,keystone-dwc3"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x2680000 0x10000>; + clocks = <&clkusb>; + clock-names = "usb"; + interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>; + ranges; + status = "disabled"; + + dwc3@2690000 { + compatible = "synopsys,dwc3"; + reg = <0x2690000 0x70000>; + interrupts = <GIC_SPI 393 IRQ_TYPE_EDGE_RISING>; + usb-phy = <&usb_phy>, <&usb_phy>; + }; + }; }; }; diff --git a/arch/arm/boot/dts/kirkwood-6192.dtsi b/arch/arm/boot/dts/kirkwood-6192.dtsi new file mode 100644 index 0000000..3916937 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-6192.dtsi @@ -0,0 +1,107 @@ +/ { + mbus { + pcie-controller { + compatible = "marvell,kirkwood-pcie"; + status = "disabled"; + device_type = "pci"; + + #address-cells = <3>; + #size-cells = <2>; + + bus-range = <0x00 0xff>; + + ranges = + <0x82000000 0 0x40000 MBUS_ID(0xf0, 0x01) 0x40000 0 0x00002000 + 0x82000000 0x1 0 MBUS_ID(0x04, 0xe8) 0 1 0 /* Port 0.0 MEM */ + 0x81000000 0x1 0 MBUS_ID(0x04, 0xe0) 0 1 0 /* Port 0.0 IO */>; + + pcie@1,0 { + device_type = "pci"; + assigned-addresses = <0x82000800 0 0x00040000 0 0x2000>; + reg = <0x0800 0 0 0 0>; + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + ranges = <0x82000000 0 0 0x82000000 0x1 0 1 0 + 0x81000000 0 0 0x81000000 0x1 0 1 0>; + interrupt-map-mask = <0 0 0 0>; + interrupt-map = <0 0 0 0 &intc 9>; + marvell,pcie-port = <0>; + marvell,pcie-lane = <0>; + clocks = <&gate_clk 2>; + status = "disabled"; + }; + }; + }; + + ocp@f1000000 { + pinctrl: pinctrl@10000 { + compatible = "marvell,88f6192-pinctrl"; + reg = <0x10000 0x20>; + + pmx_nand: pmx-nand { + marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3", + "mpp4", "mpp5", "mpp18", + "mpp19"; + marvell,function = "nand"; + }; + pmx_sata0: pmx-sata0 { + marvell,pins = "mpp5", "mpp21", "mpp23"; + marvell,function = "sata0"; + }; + pmx_sata1: pmx-sata1 { + marvell,pins = "mpp4", "mpp20", "mpp22"; + marvell,function = "sata1"; + }; + pmx_spi: pmx-spi { + marvell,pins = "mpp0", "mpp1", "mpp2", "mpp3"; + marvell,function = "spi"; + }; + pmx_twsi0: pmx-twsi0 { + marvell,pins = "mpp8", "mpp9"; + marvell,function = "twsi0"; + }; + pmx_uart0: pmx-uart0 { + marvell,pins = "mpp10", "mpp11"; + marvell,function = "uart0"; + }; + pmx_uart1: pmx-uart1 { + marvell,pins = "mpp13", "mpp14"; + marvell,function = "uart1"; + }; + pmx_sdio: pmx-sdio { + marvell,pins = "mpp12", "mpp13", "mpp14", + "mpp15", "mpp16", "mpp17"; + marvell,function = "sdio"; + }; + }; + + rtc@10300 { + compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc"; + reg = <0x10300 0x20>; + interrupts = <53>; + clocks = <&gate_clk 7>; + }; + + sata@80000 { + compatible = "marvell,orion-sata"; + reg = <0x80000 0x5000>; + interrupts = <21>; + clocks = <&gate_clk 14>, <&gate_clk 15>; + clock-names = "0", "1"; + status = "disabled"; + }; + + mvsdio@90000 { + compatible = "marvell,orion-sdio"; + reg = <0x90000 0x200>; + interrupts = <28>; + clocks = <&gate_clk 4>; + bus-width = <4>; + cap-sdio-irq; + cap-sd-highspeed; + cap-mmc-highspeed; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-6281.dtsi b/arch/arm/boot/dts/kirkwood-6281.dtsi index 650ef30..416d96e 100644 --- a/arch/arm/boot/dts/kirkwood-6281.dtsi +++ b/arch/arm/boot/dts/kirkwood-6281.dtsi @@ -89,6 +89,8 @@ interrupts = <21>; clocks = <&gate_clk 14>, <&gate_clk 15>; clock-names = "0", "1"; + phys = <&sata_phy0>, <&sata_phy1>; + phy-names = "port0", "port1"; status = "disabled"; }; @@ -97,6 +99,8 @@ reg = <0x90000 0x200>; interrupts = <28>; clocks = <&gate_clk 4>; + pinctrl-0 = <&pmx_sdio>; + pinctrl-names = "default"; bus-width = <4>; cap-sdio-irq; cap-sd-highspeed; diff --git a/arch/arm/boot/dts/kirkwood-6282.dtsi b/arch/arm/boot/dts/kirkwood-6282.dtsi index 3933a33..2902e0d 100644 --- a/arch/arm/boot/dts/kirkwood-6282.dtsi +++ b/arch/arm/boot/dts/kirkwood-6282.dtsi @@ -104,6 +104,12 @@ }; }; + thermal@10078 { + compatible = "marvell,kirkwood-thermal"; + reg = <0x10078 0x4>; + status = "okay"; + }; + rtc@10300 { compatible = "marvell,kirkwood-rtc", "marvell,orion-rtc"; reg = <0x10300 0x20>; @@ -111,12 +117,25 @@ clocks = <&gate_clk 7>; }; + i2c@11100 { + compatible = "marvell,mv64xxx-i2c"; + reg = <0x11100 0x20>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <32>; + clock-frequency = <100000>; + clocks = <&gate_clk 7>; + status = "disabled"; + }; + sata@80000 { compatible = "marvell,orion-sata"; reg = <0x80000 0x5000>; interrupts = <21>; clocks = <&gate_clk 14>, <&gate_clk 15>; clock-names = "0", "1"; + phys = <&sata_phy0>, <&sata_phy1>; + phy-names = "port0", "port1"; status = "disabled"; }; @@ -125,29 +144,13 @@ reg = <0x90000 0x200>; interrupts = <28>; clocks = <&gate_clk 4>; + pinctrl-0 = <&pmx_sdio>; + pinctrl-names = "default"; bus-width = <4>; cap-sdio-irq; cap-sd-highspeed; cap-mmc-highspeed; status = "disabled"; }; - - thermal@10078 { - compatible = "marvell,kirkwood-thermal"; - reg = <0x10078 0x4>; - status = "okay"; - }; - - i2c@11100 { - compatible = "marvell,mv64xxx-i2c"; - reg = <0x11100 0x20>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <32>; - clock-frequency = <100000>; - clocks = <&gate_clk 7>; - status = "disabled"; - }; - }; }; diff --git a/arch/arm/boot/dts/kirkwood-cloudbox.dts b/arch/arm/boot/dts/kirkwood-cloudbox.dts index 142b9cd..bb4df40 100644 --- a/arch/arm/boot/dts/kirkwood-cloudbox.dts +++ b/arch/arm/boot/dts/kirkwood-cloudbox.dts @@ -66,8 +66,8 @@ button@1 { label = "Power push button"; - linux,code = <116>; - gpios = <&gpio0 16 1>; + linux,code = <KEY_POWER>; + gpios = <&gpio0 16 GPIO_ACTIVE_LOW>; }; }; @@ -76,17 +76,17 @@ red-fail { label = "cloudbox:red:fail"; - gpios = <&gpio0 14 0>; + gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>; }; blue-sata { label = "cloudbox:blue:sata"; - gpios = <&gpio0 15 0>; + gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; }; }; gpio_poweroff { compatible = "gpio-poweroff"; - gpios = <&gpio0 17 0>; + gpios = <&gpio0 17 GPIO_ACTIVE_HIGH>; }; }; diff --git a/arch/arm/boot/dts/kirkwood-db.dtsi b/arch/arm/boot/dts/kirkwood-db.dtsi index 053aa20..afebc15 100644 --- a/arch/arm/boot/dts/kirkwood-db.dtsi +++ b/arch/arm/boot/dts/kirkwood-db.dtsi @@ -51,8 +51,8 @@ mvsdio@90000 { pinctrl-0 = <&pmx_sdio_gpios>; pinctrl-names = "default"; - wp-gpios = <&gpio1 5 0>; - cd-gpios = <&gpio1 6 0>; + wp-gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; + cd-gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; status = "okay"; }; }; diff --git a/arch/arm/boot/dts/kirkwood-dns320.dts b/arch/arm/boot/dts/kirkwood-dns320.dts index e112ca6..bf7fe8a 100644 --- a/arch/arm/boot/dts/kirkwood-dns320.dts +++ b/arch/arm/boot/dts/kirkwood-dns320.dts @@ -24,24 +24,24 @@ blue-power { label = "dns320:blue:power"; - gpios = <&gpio0 26 1>; /* GPIO 26 Active Low */ - linux,default-trigger = "default-on"; + gpios = <&gpio0 26 GPIO_ACTIVE_LOW>; + default-state = "keep"; }; blue-usb { label = "dns320:blue:usb"; - gpios = <&gpio1 11 1>; /* GPIO 43 Active Low */ + gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; }; orange-l_hdd { label = "dns320:orange:l_hdd"; - gpios = <&gpio0 28 1>; /* GPIO 28 Active Low */ + gpios = <&gpio0 28 GPIO_ACTIVE_LOW>; }; orange-r_hdd { label = "dns320:orange:r_hdd"; - gpios = <&gpio0 27 1>; /* GPIO 27 Active Low */ + gpios = <&gpio0 27 GPIO_ACTIVE_LOW>; }; orange-usb { label = "dns320:orange:usb"; - gpios = <&gpio1 3 1>; /* GPIO 35 Active Low */ + gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; /* GPIO 35 */ }; }; diff --git a/arch/arm/boot/dts/kirkwood-dns325.dts b/arch/arm/boot/dts/kirkwood-dns325.dts index 5119fb8..cb9978c 100644 --- a/arch/arm/boot/dts/kirkwood-dns325.dts +++ b/arch/arm/boot/dts/kirkwood-dns325.dts @@ -24,24 +24,24 @@ white-power { label = "dns325:white:power"; - gpios = <&gpio0 26 1>; /* GPIO 26 Active Low */ - linux,default-trigger = "default-on"; + gpios = <&gpio0 26 GPIO_ACTIVE_LOW>; + default-state = "keep"; }; white-usb { label = "dns325:white:usb"; - gpios = <&gpio1 11 1>; /* GPIO 43 Active Low */ + gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; /* GPIO 43 */ }; red-l_hdd { label = "dns325:red:l_hdd"; - gpios = <&gpio0 28 1>; /* GPIO 28 Active Low */ + gpios = <&gpio0 28 GPIO_ACTIVE_LOW>; }; red-r_hdd { label = "dns325:red:r_hdd"; - gpios = <&gpio0 27 1>; /* GPIO 27 Active Low */ + gpios = <&gpio0 27 GPIO_ACTIVE_LOW>; }; red-usb { label = "dns325:red:usb"; - gpios = <&gpio0 29 1>; /* GPIO 29 Active Low */ + gpios = <&gpio0 29 GPIO_ACTIVE_LOW>; }; }; diff --git a/arch/arm/boot/dts/kirkwood-dnskw.dtsi b/arch/arm/boot/dts/kirkwood-dnskw.dtsi index aefa375..1208756 100644 --- a/arch/arm/boot/dts/kirkwood-dnskw.dtsi +++ b/arch/arm/boot/dts/kirkwood-dnskw.dtsi @@ -15,18 +15,18 @@ button@1 { label = "Power button"; - linux,code = <116>; - gpios = <&gpio1 2 1>; + linux,code = <KEY_POWER>; + gpios = <&gpio1 2 GPIO_ACTIVE_LOW>; }; button@2 { label = "USB unmount button"; - linux,code = <161>; - gpios = <&gpio1 15 1>; + linux,code = <KEY_EJECTCD>; + gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; }; button@3 { label = "Reset button"; - linux,code = <0x198>; - gpios = <&gpio1 16 1>; + linux,code = <KEY_RESTART>; + gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; }; }; @@ -35,8 +35,8 @@ compatible = "gpio-fan"; pinctrl-0 = <&pmx_fan_high_speed &pmx_fan_low_speed>; pinctrl-names = "default"; - gpios = <&gpio1 14 1 - &gpio1 13 1>; + gpios = <&gpio1 14 GPIO_ACTIVE_LOW + &gpio1 13 GPIO_ACTIVE_LOW>; gpio-fan,speed-map = <0 0 3000 1 6000 2>; @@ -46,7 +46,7 @@ compatible = "gpio-poweroff"; pinctrl-0 = <&pmx_power_off>; pinctrl-names = "default"; - gpios = <&gpio1 4 0>; + gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; }; ocp@f1000000 { diff --git a/arch/arm/boot/dts/kirkwood-dockstar.dts b/arch/arm/boot/dts/kirkwood-dockstar.dts index 33ff368..2a41c75 100644 --- a/arch/arm/boot/dts/kirkwood-dockstar.dts +++ b/arch/arm/boot/dts/kirkwood-dockstar.dts @@ -42,12 +42,12 @@ health { label = "status:green:health"; - gpios = <&gpio1 14 1>; - linux,default-trigger = "default-on"; + gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; + default-state = "keep"; }; fault { label = "status:orange:fault"; - gpios = <&gpio1 15 1>; + gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; }; }; regulators { diff --git a/arch/arm/boot/dts/kirkwood-dreamplug.dts b/arch/arm/boot/dts/kirkwood-dreamplug.dts index 6f62af9..a755837 100644 --- a/arch/arm/boot/dts/kirkwood-dreamplug.dts +++ b/arch/arm/boot/dts/kirkwood-dreamplug.dts @@ -87,15 +87,15 @@ bluetooth { label = "dreamplug:blue:bluetooth"; - gpios = <&gpio1 15 1>; + gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; }; wifi { label = "dreamplug:green:wifi"; - gpios = <&gpio1 16 1>; + gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; }; wifi-ap { label = "dreamplug:green:wifi_ap"; - gpios = <&gpio1 17 1>; + gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; }; }; }; diff --git a/arch/arm/boot/dts/kirkwood-goflexnet.dts b/arch/arm/boot/dts/kirkwood-goflexnet.dts index a43bebb..c2e5129 100644 --- a/arch/arm/boot/dts/kirkwood-goflexnet.dts +++ b/arch/arm/boot/dts/kirkwood-goflexnet.dts @@ -85,44 +85,44 @@ health { label = "status:green:health"; - gpios = <&gpio1 14 1>; - linux,default-trigger = "default-on"; + gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; + default-state = "keep"; }; fault { label = "status:orange:fault"; - gpios = <&gpio1 15 1>; + gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; }; left0 { label = "status:white:left0"; - gpios = <&gpio1 10 0>; + gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; }; left1 { label = "status:white:left1"; - gpios = <&gpio1 11 0>; + gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>; }; left2 { label = "status:white:left2"; - gpios = <&gpio1 12 0>; + gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>; }; left3 { label = "status:white:left3"; - gpios = <&gpio1 13 0>; + gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>; }; right0 { label = "status:white:right0"; - gpios = <&gpio1 6 0>; + gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; }; right1 { label = "status:white:right1"; - gpios = <&gpio1 7 0>; + gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; }; right2 { label = "status:white:right2"; - gpios = <&gpio1 8 0>; + gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; }; right3 { label = "status:white:right3"; - gpios = <&gpio1 9 0>; + gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; }; }; regulators { @@ -141,7 +141,7 @@ enable-active-high; regulator-always-on; regulator-boot-on; - gpio = <&gpio0 29 0>; + gpio = <&gpio0 29 GPIO_ACTIVE_HIGH>; }; }; }; diff --git a/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts b/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts index d30a91a..0b557d5 100644 --- a/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts +++ b/arch/arm/boot/dts/kirkwood-guruplug-server-plus.dts @@ -45,10 +45,10 @@ nr-ports = <1>; }; + /* AzureWave AW-GH381 WiFi/BT */ mvsdio@90000 { status = "okay"; - /* No CD or WP GPIOs */ - broken-cd; + non-removable; }; }; @@ -60,19 +60,19 @@ health-r { label = "guruplug:red:health"; - gpios = <&gpio1 14 1>; + gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; }; health-g { label = "guruplug:green:health"; - gpios = <&gpio1 15 1>; + gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; }; wmode-r { label = "guruplug:red:wmode"; - gpios = <&gpio1 16 1>; + gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; }; wmode-g { label = "guruplug:green:wmode"; - gpios = <&gpio1 17 1>; + gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; }; }; }; diff --git a/arch/arm/boot/dts/kirkwood-ib62x0.dts b/arch/arm/boot/dts/kirkwood-ib62x0.dts index c5fb02f..6ccc788 100644 --- a/arch/arm/boot/dts/kirkwood-ib62x0.dts +++ b/arch/arm/boot/dts/kirkwood-ib62x0.dts @@ -63,13 +63,13 @@ button@1 { label = "USB Copy"; - linux,code = <133>; - gpios = <&gpio0 29 1>; + linux,code = <KEY_COPY>; + gpios = <&gpio0 29 GPIO_ACTIVE_LOW>; }; button@2 { label = "Reset"; - linux,code = <0x198>; - gpios = <&gpio0 28 1>; + linux,code = <KEY_RESTART>; + gpios = <&gpio0 28 GPIO_ACTIVE_LOW>; }; }; @@ -81,16 +81,16 @@ green-os { label = "ib62x0:green:os"; - gpios = <&gpio0 25 0>; - linux,default-trigger = "default-on"; + gpios = <&gpio0 25 GPIO_ACTIVE_HIGH>; + default-state = "keep"; }; red-os { label = "ib62x0:red:os"; - gpios = <&gpio0 22 0>; + gpios = <&gpio0 22 GPIO_ACTIVE_HIGH>; }; usb-copy { label = "ib62x0:red:usb_copy"; - gpios = <&gpio0 27 0>; + gpios = <&gpio0 27 GPIO_ACTIVE_HIGH>; }; }; @@ -98,7 +98,7 @@ compatible = "gpio-poweroff"; pinctrl-0 = <&pmx_power_off>; pinctrl-names = "default"; - gpios = <&gpio0 24 0>; + gpios = <&gpio0 24 GPIO_ACTIVE_HIGH>; }; }; diff --git a/arch/arm/boot/dts/kirkwood-iconnect.dts b/arch/arm/boot/dts/kirkwood-iconnect.dts index 4a62b20..f763629 100644 --- a/arch/arm/boot/dts/kirkwood-iconnect.dts +++ b/arch/arm/boot/dts/kirkwood-iconnect.dts @@ -94,37 +94,37 @@ led-level { label = "led_level"; - gpios = <&gpio1 9 0>; - linux,default-trigger = "default-on"; + gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; + default-state = "on"; }; power-blue { label = "power:blue"; - gpios = <&gpio1 10 0>; - linux,default-trigger = "timer"; + gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; + default-state = "keep"; }; power-red { label = "power:red"; - gpios = <&gpio1 11 0>; + gpios = <&gpio1 11 GPIO_ACTIVE_HIGH>; }; usb1 { label = "usb1:blue"; - gpios = <&gpio1 12 0>; + gpios = <&gpio1 12 GPIO_ACTIVE_HIGH>; }; usb2 { label = "usb2:blue"; - gpios = <&gpio1 13 0>; + gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>; }; usb3 { label = "usb3:blue"; - gpios = <&gpio1 14 0>; + gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>; }; usb4 { label = "usb4:blue"; - gpios = <&gpio1 15 0>; + gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; }; otb { label = "otb:blue"; - gpios = <&gpio1 16 0>; + gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>; }; }; @@ -137,14 +137,14 @@ button@1 { label = "OTB Button"; - linux,code = <133>; - gpios = <&gpio1 3 1>; + linux,code = <KEY_COPY>; + gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; debounce-interval = <100>; }; button@2 { label = "Reset"; - linux,code = <0x198>; - gpios = <&gpio0 12 1>; + linux,code = <KEY_RESTART>; + gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; debounce-interval = <100>; }; }; diff --git a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts index d15395d..5890006 100644 --- a/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts +++ b/arch/arm/boot/dts/kirkwood-iomega_ix2_200.dts @@ -127,20 +127,20 @@ power_led { label = "status:white:power_led"; - gpios = <&gpio0 16 0>; - linux,default-trigger = "default-on"; + gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>; + default-state = "keep"; }; rebuild_led { label = "status:white:rebuild_led"; - gpios = <&gpio1 4 0>; + gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>; }; health_led { label = "status:red:health_led"; - gpios = <&gpio1 5 0>; + gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>; }; backup_led { label = "status:blue:backup_led"; - gpios = <&gpio0 15 0>; + gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; }; }; gpio-keys { @@ -154,18 +154,18 @@ Power { label = "Power Button"; - linux,code = <116>; - gpios = <&gpio0 14 1>; + linux,code = <KEY_POWER>; + gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; }; Reset { label = "Reset Button"; - linux,code = <0x198>; - gpios = <&gpio0 12 1>; + linux,code = <KEY_RESTART>; + gpios = <&gpio0 12 GPIO_ACTIVE_LOW>; }; OTB { label = "OTB Button"; - linux,code = <133>; - gpios = <&gpio1 3 1>; + linux,code = <KEY_COPY>; + gpios = <&gpio1 3 GPIO_ACTIVE_LOW>; }; }; }; diff --git a/arch/arm/boot/dts/kirkwood-km_kirkwood.dts b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts index cd44f37..5b5808e 100644 --- a/arch/arm/boot/dts/kirkwood-km_kirkwood.dts +++ b/arch/arm/boot/dts/kirkwood-km_kirkwood.dts @@ -38,8 +38,8 @@ i2c@0 { compatible = "i2c-gpio"; - gpios = < &gpio0 8 0 /* sda */ - &gpio0 9 0 >; /* scl */ + gpios = < &gpio0 8 GPIO_ACTIVE_HIGH /* sda */ + &gpio0 9 GPIO_ACTIVE_HIGH>; /* scl */ i2c-gpio,delay-us = <2>; /* ~100 kHz */ }; }; diff --git a/arch/arm/boot/dts/kirkwood-laplug.dts b/arch/arm/boot/dts/kirkwood-laplug.dts new file mode 100644 index 0000000..c9e82ef --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-laplug.dts @@ -0,0 +1,175 @@ +/* + * Copyright (C) 2013 Maxime Hadjinlian <maxime.hadjinlian@gmail.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +/dts-v1/; + +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include "kirkwood.dtsi" +#include "kirkwood-6192.dtsi" + +/ { + model = "LaCie LaPlug"; + compatible = "lacie,laplug", "marvell,kirkwood-88f6192", "marvell,kirkwood"; + + memory { + device_type = "memory"; + reg = <0x00000000 0x8000000>; /* 128 MB */ + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + }; + + mbus { + pcie-controller { + status = "okay"; + pcie@1,0 { + status = "okay"; + }; + }; + }; + + ocp@f1000000 { + serial@12000 { + pinctrl-0 = <&pmx_uart0>; + pinctrl-names = "default"; + status = "okay"; + }; + + i2c@11000 { + pinctrl-0 = <&pmx_twsi0>; + pinctrl-names = "default"; + status = "okay"; + + eeprom@50 { + compatible = "at,24c04"; + pagesize = <16>; + reg = <0x50>; + }; + }; + + pinctrl: pinctrl@10000 { + pmx_usb_power_enable: pmx-usb-power-enable { + marvell,pins = "mpp14"; + marvell,function = "gpio"; + }; + }; + }; + + gpio_keys { + compatible = "gpio-keys"; + + button@1{ + label = "Power push button"; + linux,code = <KEY_POWER>; + gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + red-fail { + label = "laplug_v2:red:power"; + gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; + }; + blue-power { + label = "laplug_v2:blue:power"; + gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + }; + + gpio_poweroff { + compatible = "gpio-poweroff"; + gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&pmx_usb_power_enable>; + pinctrl-names = "default"; + + usb_power_back1: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "USB Power Back 1"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 15 GPIO_ACTIVE_HIGH>; + }; + + usb_power_back2: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "USB Power Back 2"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio0 28 GPIO_ACTIVE_HIGH>; + }; + + usb_power_front: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "USB Power Front"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio1 3 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&nand { + /* Total size : 512MB */ + status = "okay"; + pinctrl-0 = <&pmx_nand>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x100000>; /* 1MB */ + read-only; + }; + + partition@100000 { + label = "uImage"; + reg = <0x100000 0x1000000>; /* 16MB */ + }; + + partition@1100000 { + label = "rootfs"; + reg = <0x1100000 0x1EF00000>; /* 495MB */ + }; +}; + +&mdio { + status = "okay"; + + ethphy0: ethernet-phy@0 { + device_type = "ethernet-phy"; + reg = <0>; + }; +}; + +ð0 { + status = "okay"; + ethernet0-port@0 { + phy-handle = <ðphy0>; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-lsxl.dtsi b/arch/arm/boot/dts/kirkwood-lsxl.dtsi index 4e8f9e4..fc1cd3b 100644 --- a/arch/arm/boot/dts/kirkwood-lsxl.dtsi +++ b/arch/arm/boot/dts/kirkwood-lsxl.dtsi @@ -108,20 +108,20 @@ button@1 { label = "Function Button"; - linux,code = <357>; - gpios = <&gpio1 9 1>; + linux,code = <KEY_OPTION>; + gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; }; button@2 { label = "Power-on Switch"; - linux,code = <0>; + linux,code = <KEY_RESERVED>; linux,input-type = <5>; - gpios = <&gpio1 10 1>; + gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; }; button@3 { label = "Power-auto Switch"; - linux,code = <1>; + linux,code = <KEY_ESC>; linux,input-type = <5>; - gpios = <&gpio1 11 1>; + gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; }; }; @@ -134,28 +134,28 @@ led@1 { label = "lsxl:blue:func"; - gpios = <&gpio1 4 1>; + gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; }; led@2 { label = "lsxl:red:alarm"; - gpios = <&gpio1 5 1>; + gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; }; led@3 { label = "lsxl:amber:info"; - gpios = <&gpio1 6 1>; + gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; }; led@4 { label = "lsxl:blue:power"; - gpios = <&gpio1 7 1>; - linux,default-trigger = "default-on"; + gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; + default-state = "keep"; }; led@5 { label = "lsxl:red:func"; - gpios = <&gpio1 16 1>; + gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; }; }; @@ -163,13 +163,13 @@ compatible = "gpio-fan"; pinctrl-0 = <&pmx_fan_low &pmx_fan_high &pmx_fan_lock>; pinctrl-names = "default"; - gpios = <&gpio0 19 1 - &gpio0 18 1>; + gpios = <&gpio0 19 GPIO_ACTIVE_LOW + &gpio0 18 GPIO_ACTIVE_LOW>; gpio-fan,speed-map = <0 3 1500 2 3250 1 5000 0>; - alarm-gpios = <&gpio1 8 0>; + alarm-gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; }; restart_poweroff { diff --git a/arch/arm/boot/dts/kirkwood-mplcec4.dts b/arch/arm/boot/dts/kirkwood-mplcec4.dts index 6c1ec27..c20607c 100644 --- a/arch/arm/boot/dts/kirkwood-mplcec4.dts +++ b/arch/arm/boot/dts/kirkwood-mplcec4.dts @@ -110,7 +110,7 @@ pinctrl-0 = <&pmx_sdio &pmx_sdio_cd>; pinctrl-names = "default"; status = "okay"; - cd-gpios = <&gpio1 15 1>; + cd-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; /* No WP GPIO */ }; }; @@ -126,36 +126,36 @@ health { label = "status:green:health"; - gpios = <&gpio0 7 1>; + gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; }; user1o { label = "user1:orange"; - gpios = <&gpio1 8 1>; + gpios = <&gpio1 8 GPIO_ACTIVE_LOW>; default-state = "on"; }; user1g { label = "user1:green"; - gpios = <&gpio1 9 1>; + gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; default-state = "on"; }; user0o { label = "user0:orange"; - gpios = <&gpio1 12 1>; + gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; default-state = "on"; }; user0g { label = "user0:green"; - gpios = <&gpio1 13 1>; + gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; default-state = "on"; }; misc { label = "status:orange:misc"; - gpios = <&gpio1 14 1>; + gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; default-state = "on"; }; diff --git a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts index 6317e1d..dc86429 100644 --- a/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts +++ b/arch/arm/boot/dts/kirkwood-mv88f6281gtw-ge.dts @@ -90,17 +90,17 @@ green-status { label = "gtw:green:Status"; - gpios = <&gpio0 20 0>; + gpios = <&gpio0 20 GPIO_ACTIVE_HIGH>; }; red-status { label = "gtw:red:Status"; - gpios = <&gpio0 21 0>; + gpios = <&gpio0 21 GPIO_ACTIVE_HIGH>; }; green-usb { label = "gtw:green:USB"; - gpios = <&gpio0 12 0>; + gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; }; }; @@ -113,13 +113,13 @@ button@1 { label = "SWR Button"; - linux,code = <0x198>; /* KEY_RESTART */ - gpios = <&gpio1 15 1>; + linux,code = <KEY_RESTART>; + gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; }; button@2 { label = "WPS Button"; - linux,code = <0x211>; /* KEY_WPS_BUTTON */ - gpios = <&gpio1 14 1>; + linux,code = <KEY_WPS_BUTTON>; + gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; }; }; }; diff --git a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts index e6a102c..4d2a8db 100644 --- a/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts +++ b/arch/arm/boot/dts/kirkwood-netgear_readynas_duo_v2.dts @@ -1,3 +1,14 @@ +/* + * Device Tree file for NETGEAR ReadyNAS Duo v2 + * + * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + /dts-v1/; #include "kirkwood.dtsi" @@ -32,41 +43,50 @@ marvell,pins = "mpp47"; marvell,function = "gpio"; }; + pmx_button_backup: pmx-button-backup { marvell,pins = "mpp45"; marvell,function = "gpio"; }; + pmx_button_reset: pmx-button-reset { marvell,pins = "mpp13"; marvell,function = "gpio"; }; + pmx_led_blue_power: pmx-led-blue-power { marvell,pins = "mpp31"; marvell,function = "gpio"; }; + pmx_led_blue_activity: pmx-led-blue-activity { marvell,pins = "mpp38"; marvell,function = "gpio"; }; + pmx_led_blue_disk1: pmx-led-blue-disk1 { marvell,pins = "mpp23"; marvell,function = "gpio"; }; + pmx_led_blue_disk2: pmx-led-blue-disk2 { marvell,pins = "mpp22"; marvell,function = "gpio"; }; + pmx_led_blue_backup: pmx-led-blue-backup { marvell,pins = "mpp29"; marvell,function = "gpio"; }; + + pmx_poweroff: pmx-poweroff { + marvell,pins = "mpp30"; + marvell,function = "gpio"; + }; }; clocks { - #address-cells = <1>; - #size-cells = <0>; - - g762_clk: fixedclk { + g762_clk: g762-oscillator { compatible = "fixed-clock"; #clock-cells = <0>; clock-frequency = <8192>; @@ -112,69 +132,80 @@ power_led { label = "status:blue:power_led"; - gpios = <&gpio0 31 1>; /* GPIO 31 Active Low */ - linux,default-trigger = "default-on"; + gpios = <&gpio0 31 GPIO_ACTIVE_LOW>; + default-state = "keep"; }; + activity_led { label = "status:blue:activity_led"; - gpios = <&gpio1 6 1>; /* GPIO 38 Active Low */ + gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; }; + disk1_led { label = "status:blue:disk1_led"; - gpios = <&gpio0 23 1>; /* GPIO 23 Active Low */ + gpios = <&gpio0 23 GPIO_ACTIVE_LOW>; }; + disk2_led { label = "status:blue:disk2_led"; - gpios = <&gpio0 22 1>; /* GPIO 22 Active Low */ + gpios = <&gpio0 22 GPIO_ACTIVE_LOW>; }; + backup_led { label = "status:blue:backup_led"; - gpios = <&gpio0 29 1>; /* GPIO 29 Active Low*/ + gpios = <&gpio0 29 GPIO_ACTIVE_LOW>; }; }; - gpio_keys { + gpio-keys { compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; pinctrl-0 = <&pmx_button_power &pmx_button_backup &pmx_button_reset>; pinctrl-names = "default"; - button@1 { + power-button { label = "Power Button"; - linux,code = <116>; /* KEY_POWER */ - gpios = <&gpio1 15 1>; + linux,code = <KEY_POWER>; + gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; }; - button@2 { + + reset-button { label = "Reset Button"; - linux,code = <0x198>; /* KEY_RESTART */ - gpios = <&gpio0 13 1>; + linux,code = <KEY_RESTART>; + gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; }; - button@3 { + + backup-button { label = "Backup Button"; - linux,code = <133>; /* KEY_COPY */ - gpios = <&gpio1 13 1>; + linux,code = <KEY_COPY>; + gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; }; }; - regulators { - compatible = "simple-bus"; - #address-cells = <1>; - #size-cells = <0>; - - usb_power: regulator@1 { - compatible = "regulator-fixed"; - reg = <1>; - regulator-name = "USB 3.0 Power"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - regulator-always-on; - regulator-boot-on; - gpio = <&gpio1 14 0>; - }; - }; + gpio-poweroff { + compatible = "gpio-poweroff"; + pinctrl-0 = <&pmx_poweroff>; + pinctrl-names = "default"; + gpios = <&gpio0 30 GPIO_ACTIVE_LOW>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + usb3_regulator: usb3-regulator { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "USB 3.0 Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>; + }; + }; }; &nand { @@ -210,7 +241,7 @@ &mdio { status = "okay"; - ethphy0: ethernet-phy@0 { + ethphy0: ethernet-phy@0 { /* Marvell 88E1318 */ device_type = "ethernet-phy"; reg = <0>; }; diff --git a/arch/arm/boot/dts/kirkwood-netgear_readynas_nv+_v2.dts b/arch/arm/boot/dts/kirkwood-netgear_readynas_nv+_v2.dts new file mode 100644 index 0000000..7c8a0d9 --- /dev/null +++ b/arch/arm/boot/dts/kirkwood-netgear_readynas_nv+_v2.dts @@ -0,0 +1,268 @@ +/* + * Device Tree file for NETGEAR ReadyNAS NV+ v2 + * + * Copyright (C) 2013, Arnaud EBALARD <arno@natisbad.org> + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +/dts-v1/; + +#include "kirkwood.dtsi" +#include "kirkwood-6282.dtsi" + +/ { + model = "NETGEAR ReadyNAS NV+ v2"; + compatible = "netgear,readynas-nv+-v2", "netgear,readynas", "marvell,kirkwood-88f6282", "marvell,kirkwood"; + + memory { /* 256 MB */ + device_type = "memory"; + reg = <0x00000000 0x10000000>; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk"; + }; + + mbus { + pcie-controller { + status = "okay"; + + /* Connected to NEC uPD720200 USB 3.0 controller */ + pcie@1,0 { + /* Port 0, Lane 0 */ + status = "okay"; + }; + }; + }; + + ocp@f1000000 { + pinctrl: pinctrl@10000 { + pmx_button_power: pmx-button-power { + marvell,pins = "mpp47"; + marvell,function = "gpio"; + }; + + pmx_button_backup: pmx-button-backup { + marvell,pins = "mpp45"; + marvell,function = "gpio"; + }; + + pmx_button_reset: pmx-button-reset { + marvell,pins = "mpp13"; + marvell,function = "gpio"; + }; + + pmx_led_blue_power: pmx-led-blue-power { + marvell,pins = "mpp31"; + marvell,function = "gpio"; + }; + + pmx_led_blue_backup: pmx-led-blue-backup { + marvell,pins = "mpp22"; + marvell,function = "gpio"; + }; + + pmx_led_blue_disk1: pmx-led-blue-disk1 { + marvell,pins = "mpp20"; + marvell,function = "gpio"; + }; + + pmx_led_blue_disk2: pmx-led-blue-disk2 { + marvell,pins = "mpp23"; + marvell,function = "gpio"; + }; + + pmx_led_blue_disk3: pmx-led-blue-disk3 { + marvell,pins = "mpp24"; + marvell,function = "gpio"; + }; + + pmx_led_blue_disk4: pmx-led-blue-disk4 { + marvell,pins = "mpp29"; + marvell,function = "gpio"; + }; + + pmx_poweroff: pmx-poweroff { + marvell,pins = "mpp30"; + marvell,function = "gpio"; + }; + }; + + clocks { + g762_clk: g762-oscillator { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <8192>; + }; + }; + + i2c@11000 { + status = "okay"; + + rs5c372a: rs5c372a@32 { + compatible = "ricoh,rs5c372a"; + reg = <0x32>; + }; + + g762: g762@3e { + compatible = "gmt,g762"; + reg = <0x3e>; + clocks = <&g762_clk>; /* input clock */ + fan_gear_mode = <0>; + fan_startv = <1>; + pwm_polarity = <0>; + }; + }; + + serial@12000 { + pinctrl-0 = <&pmx_uart0>; + pinctrl-names = "default"; + status = "okay"; + }; + + sata@80000 { /* Connected to Marvell 88SM4140 SATA port multiplier */ + status = "okay"; + nr-ports = <1>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-0 = < &pmx_led_blue_power &pmx_led_blue_backup + &pmx_led_blue_disk1 &pmx_led_blue_disk2 + &pmx_led_blue_disk3 &pmx_led_blue_disk3 >; + pinctrl-names = "default"; + + power_led { + label = "status:blue:power_led"; + gpios = <&gpio0 31 GPIO_ACTIVE_LOW>; + linux,default-trigger = "default-on"; + }; + + backup_led { + label = "status:blue:backup_led"; + gpios = <&gpio0 22 GPIO_ACTIVE_LOW>; + }; + + disk1_led { + label = "status:blue:disk1_led"; + gpios = <&gpio0 20 GPIO_ACTIVE_LOW>; + }; + + disk2_led { + label = "status:blue:disk2_led"; + gpios = <&gpio0 23 GPIO_ACTIVE_LOW>; + }; + + disk3_led { + label = "status:blue:disk3_led"; + gpios = <&gpio0 24 GPIO_ACTIVE_LOW>; + }; + + disk4_led { + label = "status:blue:disk4_led"; + gpios = <&gpio0 29 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-0 = <&pmx_button_power &pmx_button_backup + &pmx_button_reset>; + pinctrl-names = "default"; + + power-button { + label = "Power Button"; + linux,code = <KEY_POWER>; + gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; + }; + + reset-button { + label = "Reset Button"; + linux,code = <KEY_RESTART>; + gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; + }; + + backup-button { + label = "Backup Button"; + linux,code = <KEY_COPY>; + gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-poweroff { + compatible = "gpio-poweroff"; + pinctrl-0 = <&pmx_poweroff>; + pinctrl-names = "default"; + gpios = <&gpio0 30 GPIO_ACTIVE_LOW>; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + usb3_regulator: usb3-regulator { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "USB 3.0 Power"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-always-on; + regulator-boot-on; + gpio = <&gpio1 14 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&nand { + status = "okay"; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x180000>; + read-only; + }; + + partition@180000 { + label = "u-boot-env"; + reg = <0x180000 0x20000>; + }; + + partition@200000 { + label = "uImage"; + reg = <0x0200000 0x600000>; + }; + + partition@800000 { + label = "minirootfs"; + reg = <0x0800000 0x1000000>; + }; + + partition@1800000 { + label = "jffs2"; + reg = <0x1800000 0x6800000>; + }; +}; + +&mdio { + status = "okay"; + + ethphy0: ethernet-phy@0 { /* Marvell 88E1318 */ + device_type = "ethernet-phy"; + reg = <0>; + }; +}; + +ð0 { + status = "okay"; + + ethernet0-port@0 { + phy-handle = <ðphy0>; + }; +}; diff --git a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi index 2fcb82e..ae1ccbe 100644 --- a/arch/arm/boot/dts/kirkwood-ns2-common.dtsi +++ b/arch/arm/boot/dts/kirkwood-ns2-common.dtsi @@ -64,8 +64,8 @@ button@1 { label = "Power push button"; - linux,code = <116>; - gpios = <&gpio1 0 0>; + linux,code = <KEY_POWER>; + gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>; }; }; @@ -74,13 +74,13 @@ red-fail { label = "ns2:red:fail"; - gpios = <&gpio0 12 0>; + gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; }; }; gpio_poweroff { compatible = "gpio-poweroff"; - gpios = <&gpio0 31 0>; + gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>; }; }; diff --git a/arch/arm/boot/dts/kirkwood-ns2lite.dts b/arch/arm/boot/dts/kirkwood-ns2lite.dts index 2796070..1f2ca60 100644 --- a/arch/arm/boot/dts/kirkwood-ns2lite.dts +++ b/arch/arm/boot/dts/kirkwood-ns2lite.dts @@ -25,8 +25,8 @@ blue-sata { label = "ns2:blue:sata"; - gpios = <&gpio0 30 1>; - linux,default-trigger = "default-on"; + gpios = <&gpio0 30 GPIO_ACTIVE_LOW>; + linux,default-trigger = "ide-disk"; }; }; }; diff --git a/arch/arm/boot/dts/kirkwood-ns2max.dts b/arch/arm/boot/dts/kirkwood-ns2max.dts index defdc77..72c78d0 100644 --- a/arch/arm/boot/dts/kirkwood-ns2max.dts +++ b/arch/arm/boot/dts/kirkwood-ns2max.dts @@ -22,10 +22,10 @@ gpio_fan { compatible = "gpio-fan"; - gpios = <&gpio0 22 1 - &gpio0 7 1 - &gpio1 1 1 - &gpio0 23 1>; + gpios = <&gpio0 22 GPIO_ACTIVE_LOW + &gpio0 7 GPIO_ACTIVE_LOW + &gpio1 1 GPIO_ACTIVE_LOW + &gpio0 23 GPIO_ACTIVE_LOW>; gpio-fan,speed-map = < 0 0 1500 15 @@ -36,7 +36,7 @@ 3300 10 4300 9 5500 8>; - alarm-gpios = <&gpio0 25 1>; + alarm-gpios = <&gpio0 25 GPIO_ACTIVE_LOW>; }; ns2-leds { diff --git a/arch/arm/boot/dts/kirkwood-ns2mini.dts b/arch/arm/boot/dts/kirkwood-ns2mini.dts index adbafdd..c441bf6 100644 --- a/arch/arm/boot/dts/kirkwood-ns2mini.dts +++ b/arch/arm/boot/dts/kirkwood-ns2mini.dts @@ -23,10 +23,10 @@ gpio_fan { compatible = "gpio-fan"; - gpios = <&gpio0 22 1 - &gpio0 7 1 - &gpio1 1 1 - &gpio0 23 1>; + gpios = <&gpio0 22 GPIO_ACTIVE_LOW + &gpio0 7 GPIO_ACTIVE_LOW + &gpio1 1 GPIO_ACTIVE_LOW + &gpio0 23 GPIO_ACTIVE_LOW>; gpio-fan,speed-map = < 0 0 3000 15 @@ -37,7 +37,7 @@ 7140 10 7980 9 9200 8>; - alarm-gpios = <&gpio0 25 1>; + alarm-gpios = <&gpio0 25 GPIO_ACTIVE_LOW>; }; ns2-leds { diff --git a/arch/arm/boot/dts/kirkwood-nsa310-common.dtsi b/arch/arm/boot/dts/kirkwood-nsa310-common.dtsi index e3f915d..aa78c2d 100644 --- a/arch/arm/boot/dts/kirkwood-nsa310-common.dtsi +++ b/arch/arm/boot/dts/kirkwood-nsa310-common.dtsi @@ -40,7 +40,7 @@ compatible = "gpio-poweroff"; pinctrl-0 = <&pmx_pwr_off>; pinctrl-names = "default"; - gpios = <&gpio1 16 0>; + gpios = <&gpio1 16 GPIO_ACTIVE_HIGH>; }; regulators { @@ -58,7 +58,7 @@ regulator-max-microvolt = <5000000>; regulator-always-on; regulator-boot-on; - gpio = <&gpio0 21 0>; + gpio = <&gpio0 21 GPIO_ACTIVE_HIGH>; }; }; }; diff --git a/arch/arm/boot/dts/kirkwood-nsa310.dts b/arch/arm/boot/dts/kirkwood-nsa310.dts index b5418bc..03fa24c 100644 --- a/arch/arm/boot/dts/kirkwood-nsa310.dts +++ b/arch/arm/boot/dts/kirkwood-nsa310.dts @@ -119,18 +119,18 @@ button@1 { label = "Power Button"; - linux,code = <116>; - gpios = <&gpio1 14 0>; + linux,code = <KEY_POWER>; + gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>; }; button@2 { label = "Copy Button"; - linux,code = <133>; - gpios = <&gpio1 5 1>; + linux,code = <KEY_COPY>; + gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; }; button@3 { label = "Reset Button"; - linux,code = <0x198>; - gpios = <&gpio1 4 1>; + linux,code = <KEY_RESTART>; + gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; }; }; @@ -145,43 +145,43 @@ green-sys { label = "nsa310:green:sys"; - gpios = <&gpio0 28 0>; + gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>; }; red-sys { label = "nsa310:red:sys"; - gpios = <&gpio0 29 0>; + gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>; }; green-hdd { label = "nsa310:green:hdd"; - gpios = <&gpio1 9 0>; + gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; }; red-hdd { label = "nsa310:red:hdd"; - gpios = <&gpio1 10 0>; + gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; }; green-esata { label = "nsa310:green:esata"; - gpios = <&gpio0 12 0>; + gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; }; red-esata { label = "nsa310:red:esata"; - gpios = <&gpio0 13 0>; + gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; }; green-usb { label = "nsa310:green:usb"; - gpios = <&gpio0 15 0>; + gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; }; red-usb { label = "nsa310:red:usb"; - gpios = <&gpio0 16 0>; + gpios = <&gpio0 16 GPIO_ACTIVE_HIGH>; }; green-copy { label = "nsa310:green:copy"; - gpios = <&gpio1 7 0>; + gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; }; red-copy { label = "nsa310:red:copy"; - gpios = <&gpio1 8 0>; + gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; }; }; }; diff --git a/arch/arm/boot/dts/kirkwood-nsa310a.dts b/arch/arm/boot/dts/kirkwood-nsa310a.dts index ab0212b..a5e7794 100644 --- a/arch/arm/boot/dts/kirkwood-nsa310a.dts +++ b/arch/arm/boot/dts/kirkwood-nsa310a.dts @@ -107,18 +107,18 @@ button@1 { label = "Power Button"; - linux,code = <116>; - gpios = <&gpio1 14 0>; + linux,code = <KEY_POWER>; + gpios = <&gpio1 14 GPIO_ACTIVE_HIGH>; }; button@2 { label = "Copy Button"; - linux,code = <133>; - gpios = <&gpio1 5 1>; + linux,code = <KEY_COPY>; + gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; }; button@3 { label = "Reset Button"; - linux,code = <0x198>; - gpios = <&gpio1 4 1>; + linux,code = <KEY_RESTART>; + gpios = <&gpio1 4 GPIO_ACTIVE_LOW>; }; }; @@ -127,39 +127,39 @@ green-sys { label = "nsa310:green:sys"; - gpios = <&gpio0 28 0>; + gpios = <&gpio0 28 GPIO_ACTIVE_HIGH>; }; red-sys { label = "nsa310:red:sys"; - gpios = <&gpio0 29 0>; + gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>; }; green-hdd { label = "nsa310:green:hdd"; - gpios = <&gpio1 9 0>; + gpios = <&gpio1 9 GPIO_ACTIVE_HIGH>; }; red-hdd { label = "nsa310:red:hdd"; - gpios = <&gpio1 10 0>; + gpios = <&gpio1 10 GPIO_ACTIVE_HIGH>; }; green-esata { label = "nsa310:green:esata"; - gpios = <&gpio0 12 0>; + gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; }; red-esata { label = "nsa310:red:esata"; - gpios = <&gpio0 13 0>; + gpios = <&gpio0 13 GPIO_ACTIVE_HIGH>; }; green-usb { label = "nsa310:green:usb"; - gpios = <&gpio0 15 0>; + gpios = <&gpio0 15 GPIO_ACTIVE_HIGH>; }; green-copy { label = "nsa310:green:copy"; - gpios = <&gpio1 7 0>; + gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; }; red-copy { label = "nsa310:red:copy"; - gpios = <&gpio1 8 0>; + gpios = <&gpio1 8 GPIO_ACTIVE_HIGH>; }; }; }; diff --git a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts index f0e3d21..5c6a4f1 100644 --- a/arch/arm/boot/dts/kirkwood-openblocks_a6.dts +++ b/arch/arm/boot/dts/kirkwood-openblocks_a6.dts @@ -101,17 +101,17 @@ led-red { label = "obsa6:red:stat"; - gpios = <&gpio1 9 1>; + gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; }; led-green { label = "obsa6:green:stat"; - gpios = <&gpio1 10 1>; + gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; }; led-yellow { label = "obsa6:yellow:stat"; - gpios = <&gpio1 11 1>; + gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; }; }; @@ -124,8 +124,8 @@ button@1 { label = "Init Button"; - linux,code = <116>; - gpios = <&gpio1 6 0>; + linux,code = <KEY_POWER>; + gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; }; }; }; diff --git a/arch/arm/boot/dts/kirkwood-openblocks_a7.dts b/arch/arm/boot/dts/kirkwood-openblocks_a7.dts index 851fb2a..c054ef6 100644 --- a/arch/arm/boot/dts/kirkwood-openblocks_a7.dts +++ b/arch/arm/boot/dts/kirkwood-openblocks_a7.dts @@ -126,17 +126,17 @@ led-red { label = "obsa7:red:stat"; - gpios = <&gpio1 9 1>; + gpios = <&gpio1 9 GPIO_ACTIVE_LOW>; }; led-green { label = "obsa7:green:stat"; - gpios = <&gpio1 10 1>; + gpios = <&gpio1 10 GPIO_ACTIVE_LOW>; }; led-yellow { label = "obsa7:yellow:stat"; - gpios = <&gpio1 11 1>; + gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; }; }; @@ -149,8 +149,8 @@ button@1 { label = "Init Button"; - linux,code = <116>; - gpios = <&gpio1 6 0>; + linux,code = <KEY_POWER>; + gpios = <&gpio1 6 GPIO_ACTIVE_HIGH>; }; }; }; diff --git a/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi b/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi index 1173d7f..7b1cd99 100644 --- a/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi +++ b/arch/arm/boot/dts/kirkwood-sheevaplug-common.dtsi @@ -1,5 +1,5 @@ /* - * kirkwood-sheevaplug-common.dts - Common parts for Sheevaplugs + * kirkwood-sheevaplug-common.dtsi - Common parts for Sheevaplugs * * Copyright (C) 2013 Simon Baatz <gmbnomis@gmail.com> * diff --git a/arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts b/arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts index eac6a21..e2b4ea4 100644 --- a/arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts +++ b/arch/arm/boot/dts/kirkwood-sheevaplug-esata.dts @@ -24,8 +24,8 @@ pinctrl-0 = <&pmx_sdio &pmx_sdio_cd &pmx_sdio_wp>; pinctrl-names = "default"; status = "okay"; - cd-gpios = <&gpio1 12 1>; - wp-gpios = <&gpio1 15 0>; + cd-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; + wp-gpios = <&gpio1 15 GPIO_ACTIVE_HIGH>; }; }; @@ -36,8 +36,8 @@ health { label = "sheevaplug:blue:health"; - gpios = <&gpio1 17 1>; - linux,default-trigger = "default-on"; + gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; + default-state = "keep"; }; }; }; diff --git a/arch/arm/boot/dts/kirkwood-sheevaplug.dts b/arch/arm/boot/dts/kirkwood-sheevaplug.dts index bb61918..82f6abf 100644 --- a/arch/arm/boot/dts/kirkwood-sheevaplug.dts +++ b/arch/arm/boot/dts/kirkwood-sheevaplug.dts @@ -1,5 +1,5 @@ /* - * kirkwood-sheevaplug-esata.dts - Device tree file for Sheevaplug + * kirkwood-sheevaplug.dts - Device tree file for Sheevaplug * * Copyright (C) 2013 Simon Baatz <gmbnomis@gmail.com> * @@ -31,13 +31,13 @@ health { label = "sheevaplug:blue:health"; - gpios = <&gpio1 17 1>; - linux,default-trigger = "default-on"; + gpios = <&gpio1 17 GPIO_ACTIVE_LOW>; + default-state = "keep"; }; misc { label = "sheevaplug:red:misc"; - gpios = <&gpio1 14 1>; + gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; }; }; }; diff --git a/arch/arm/boot/dts/kirkwood-topkick.dts b/arch/arm/boot/dts/kirkwood-topkick.dts index 320da67..40d6adf 100644 --- a/arch/arm/boot/dts/kirkwood-topkick.dts +++ b/arch/arm/boot/dts/kirkwood-topkick.dts @@ -131,25 +131,25 @@ disk { label = "topkick:yellow:disk"; - gpios = <&gpio0 21 1>; + gpios = <&gpio0 21 GPIO_ACTIVE_LOW>; linux,default-trigger = "ide-disk"; }; system2 { label = "topkick:red:system"; - gpios = <&gpio1 5 1>; + gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; }; system { label = "topkick:blue:system"; - gpios = <&gpio1 6 1>; + gpios = <&gpio1 6 GPIO_ACTIVE_LOW>; default-state = "on"; }; wifi { label = "topkick:green:wifi"; - gpios = <&gpio1 7 1>; + gpios = <&gpio1 7 GPIO_ACTIVE_LOW>; }; wifi2 { label = "topkick:yellow:wifi"; - gpios = <&gpio1 16 1>; + gpios = <&gpio1 16 GPIO_ACTIVE_LOW>; }; }; regulators { diff --git a/arch/arm/boot/dts/kirkwood-ts219-6281.dts b/arch/arm/boot/dts/kirkwood-ts219-6281.dts index f755bc1..c17ae45 100644 --- a/arch/arm/boot/dts/kirkwood-ts219-6281.dts +++ b/arch/arm/boot/dts/kirkwood-ts219-6281.dts @@ -41,13 +41,13 @@ button@1 { label = "USB Copy"; - linux,code = <133>; - gpios = <&gpio0 15 1>; + linux,code = <KEY_COPY>; + gpios = <&gpio0 15 GPIO_ACTIVE_LOW>; }; button@2 { label = "Reset"; - linux,code = <0x198>; - gpios = <&gpio0 16 1>; + linux,code = <KEY_RESTART>; + gpios = <&gpio0 16 GPIO_ACTIVE_LOW>; }; }; }; diff --git a/arch/arm/boot/dts/kirkwood-ts219-6282.dts b/arch/arm/boot/dts/kirkwood-ts219-6282.dts index 345562f..0713d072 100644 --- a/arch/arm/boot/dts/kirkwood-ts219-6282.dts +++ b/arch/arm/boot/dts/kirkwood-ts219-6282.dts @@ -51,13 +51,13 @@ button@1 { label = "USB Copy"; - linux,code = <133>; - gpios = <&gpio1 11 1>; + linux,code = <KEY_COPY>; + gpios = <&gpio1 11 GPIO_ACTIVE_LOW>; }; button@2 { label = "Reset"; - linux,code = <0x198>; - gpios = <&gpio1 5 1>; + linux,code = <KEY_RESTART>; + gpios = <&gpio1 5 GPIO_ACTIVE_LOW>; }; }; }; diff --git a/arch/arm/boot/dts/kirkwood.dtsi b/arch/arm/boot/dts/kirkwood.dtsi index 8b73c80..81e6c40 100644 --- a/arch/arm/boot/dts/kirkwood.dtsi +++ b/arch/arm/boot/dts/kirkwood.dtsi @@ -1,4 +1,6 @@ /include/ "skeleton.dtsi" +#include <dt-bindings/input/input.h> +#include <dt-bindings/gpio/gpio.h> #define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16)) @@ -68,39 +70,21 @@ #address-cells = <1>; #size-cells = <1>; - mbusc: mbus-controller@20000 { - compatible = "marvell,mbus-controller"; - reg = <0x20000 0x80>, <0x1500 0x20>; - }; - - timer: timer@20300 { - compatible = "marvell,orion-timer"; - reg = <0x20300 0x20>; - interrupt-parent = <&bridge_intc>; - interrupts = <1>, <2>; - clocks = <&core_clk 0>; - }; - - intc: main-interrupt-ctrl@20200 { - compatible = "marvell,orion-intc"; - interrupt-controller; - #interrupt-cells = <1>; - reg = <0x20200 0x10>, <0x20210 0x10>; - }; - - bridge_intc: bridge-interrupt-ctrl@20110 { - compatible = "marvell,orion-bridge-intc"; - interrupt-controller; - #interrupt-cells = <1>; - reg = <0x20110 0x8>; - interrupts = <1>; - marvell,#interrupts = <6>; - }; - core_clk: core-clocks@10030 { compatible = "marvell,kirkwood-core-clock"; reg = <0x10030 0x4>; - #clock-cells = <1>; + #clock-cells = <1>; + }; + + spi@10600 { + compatible = "marvell,orion-spi"; + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + interrupts = <23>; + reg = <0x10600 0x28>; + clocks = <&gate_clk 7>; + status = "disabled"; }; gpio0: gpio@10100 { @@ -127,6 +111,17 @@ clocks = <&gate_clk 7>; }; + i2c@11000 { + compatible = "marvell,mv64xxx-i2c"; + reg = <0x11000 0x20>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <29>; + clock-frequency = <100000>; + clocks = <&gate_clk 7>; + status = "disabled"; + }; + serial@12000 { compatible = "ns16550a"; reg = <0x12000 0x100>; @@ -145,15 +140,18 @@ status = "disabled"; }; - spi@10600 { - compatible = "marvell,orion-spi"; - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - interrupts = <23>; - reg = <0x10600 0x28>; - clocks = <&gate_clk 7>; - status = "disabled"; + mbusc: mbus-controller@20000 { + compatible = "marvell,mbus-controller"; + reg = <0x20000 0x80>, <0x1500 0x20>; + }; + + bridge_intc: bridge-interrupt-ctrl@20110 { + compatible = "marvell,orion-bridge-intc"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x20110 0x8>; + interrupts = <1>; + marvell,#interrupts = <6>; }; gate_clk: clock-gating-control@2011c { @@ -163,6 +161,21 @@ #clock-cells = <1>; }; + intc: main-interrupt-ctrl@20200 { + compatible = "marvell,orion-intc"; + interrupt-controller; + #interrupt-cells = <1>; + reg = <0x20200 0x10>, <0x20210 0x10>; + }; + + timer: timer@20300 { + compatible = "marvell,orion-timer"; + reg = <0x20300 0x20>; + interrupt-parent = <&bridge_intc>; + interrupts = <1>, <2>; + clocks = <&core_clk 0>; + }; + wdt: watchdog-timer@20300 { compatible = "marvell,orion-wdt"; reg = <0x20300 0x28>; @@ -172,6 +185,14 @@ status = "okay"; }; + ehci@50000 { + compatible = "marvell,orion-ehci"; + reg = <0x50000 0x1000>; + interrupts = <19>; + clocks = <&gate_clk 3>; + status = "okay"; + }; + xor@60800 { compatible = "marvell,orion-xor"; reg = <0x60800 0x100 @@ -212,37 +233,6 @@ }; }; - ehci@50000 { - compatible = "marvell,orion-ehci"; - reg = <0x50000 0x1000>; - interrupts = <19>; - clocks = <&gate_clk 3>; - status = "okay"; - }; - - i2c@11000 { - compatible = "marvell,mv64xxx-i2c"; - reg = <0x11000 0x20>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <29>; - clock-frequency = <100000>; - clocks = <&gate_clk 7>; - status = "disabled"; - }; - - mdio: mdio-bus@72004 { - compatible = "marvell,orion-mdio"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x72004 0x84>; - interrupts = <46>; - clocks = <&gate_clk 0>; - status = "disabled"; - - /* add phy nodes in board file */ - }; - eth0: ethernet-controller@72000 { compatible = "marvell,kirkwood-eth"; #address-cells = <1>; @@ -263,6 +253,18 @@ }; }; + mdio: mdio-bus@72004 { + compatible = "marvell,orion-mdio"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x72004 0x84>; + interrupts = <46>; + clocks = <&gate_clk 0>; + status = "disabled"; + + /* add phy nodes in board file */ + }; + eth1: ethernet-controller@76000 { compatible = "marvell,kirkwood-eth"; #address-cells = <1>; @@ -282,5 +284,23 @@ /* set phy-handle property in board file */ }; }; + + sata_phy0: sata-phy@82000 { + compatible = "marvell,mvebu-sata-phy"; + reg = <0x82000 0x0334>; + clocks = <&gate_clk 14>; + clock-names = "sata"; + #phy-cells = <0>; + status = "ok"; + }; + + sata_phy1: sata-phy@84000 { + compatible = "marvell,mvebu-sata-phy"; + reg = <0x84000 0x0334>; + clocks = <&gate_clk 15>; + clock-names = "sata"; + #phy-cells = <0>; + status = "ok"; + }; }; }; diff --git a/arch/arm/boot/dts/moxart-uc7112lx.dts b/arch/arm/boot/dts/moxart-uc7112lx.dts new file mode 100644 index 0000000..90749d5 --- /dev/null +++ b/arch/arm/boot/dts/moxart-uc7112lx.dts @@ -0,0 +1,109 @@ +/* moxart-uc7112lx.dts - Device Tree file for MOXA UC-7112-LX + * + * Copyright (C) 2013 Jonas Jensen <jonas.jensen@gmail.com> + * + * Licensed under GPLv2 or later. + */ + +/dts-v1/; +/include/ "moxart.dtsi" + +/ { + model = "MOXA UC-7112-LX"; + compatible = "moxa,moxart-uc-7112-lx", "moxa,moxart"; + + memory { + device_type = "memory"; + reg = <0x0 0x2000000>; + }; + + flash@80000000,0 { + compatible = "numonyx,js28f128", "cfi-flash"; + reg = <0x80000000 0x1000000>; + bank-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "bootloader"; + reg = <0x0 0x40000>; + }; + partition@40000 { + label = "linux kernel"; + reg = <0x40000 0x1C0000>; + }; + partition@200000 { + label = "root filesystem"; + reg = <0x200000 0x800000>; + }; + partition@a00000 { + label = "user filesystem"; + reg = <0xa00000 0x600000>; + }; + }; + + leds { + compatible = "gpio-leds"; + user-led { + label = "ready-led"; + gpios = <&gpio 27 0x1>; + default-state = "on"; + linux,default-trigger = "default-on"; + }; + }; + + gpio_keys_polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <500>; + button@25 { + label = "GPIO Reset"; + linux,code = <116>; + gpios = <&gpio 25 1>; + }; + }; + + chosen { + bootargs = "console=ttyS0,115200n8 earlyprintk root=/dev/mmcblk0p1 rw rootwait"; + }; +}; + +&clk_pll { + clocks = <&ref12>; +}; + +&sdhci { + status = "okay"; +}; + +&mdio0 { + status = "okay"; + + ethphy0: ethernet-phy@1 { + device_type = "ethernet-phy"; + compatible = "moxa,moxart-rtl8201cp", "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; +}; + +&mdio1 { + status = "okay"; + + ethphy1: ethernet-phy@1 { + device_type = "ethernet-phy"; + compatible = "moxa,moxart-rtl8201cp", "ethernet-phy-ieee802.3-c22"; + reg = <1>; + }; +}; + +&mac0 { + status = "okay"; +}; + +&mac1 { + status = "okay"; +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm/boot/dts/moxart.dtsi b/arch/arm/boot/dts/moxart.dtsi new file mode 100644 index 0000000..da1d8ef --- /dev/null +++ b/arch/arm/boot/dts/moxart.dtsi @@ -0,0 +1,154 @@ +/* moxart.dtsi - Device Tree Include file for MOXA ART family SoC + * + * Copyright (C) 2013 Jonas Jensen <jonas.jensen@gmail.com> + * + * Licensed under GPLv2 or later. + */ + +/include/ "skeleton.dtsi" + +/ { + compatible = "moxa,moxart"; + model = "MOXART"; + interrupt-parent = <&intc>; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + compatible = "faraday,fa526"; + reg = <0>; + }; + }; + + clocks { + #address-cells = <1>; + #size-cells = <0>; + + ref12: ref12M { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <12000000>; + }; + }; + + soc { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <1>; + reg = <0x90000000 0x10000000>; + ranges; + + intc: interrupt-controller@98800000 { + compatible = "moxa,moxart-ic"; + reg = <0x98800000 0x38>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-mask = <0x00080000>; + }; + + clk_pll: clk_pll@98100000 { + compatible = "moxa,moxart-pll-clock"; + #clock-cells = <0>; + reg = <0x98100000 0x34>; + }; + + clk_apb: clk_apb@98100000 { + compatible = "moxa,moxart-apb-clock"; + #clock-cells = <0>; + reg = <0x98100000 0x34>; + clocks = <&clk_pll>; + }; + + timer: timer@98400000 { + compatible = "moxa,moxart-timer"; + reg = <0x98400000 0x42>; + interrupts = <19 1>; + clocks = <&clk_apb>; + }; + + gpio: gpio@98700000 { + gpio-controller; + #gpio-cells = <2>; + compatible = "moxa,moxart-gpio"; + reg = <0x98700000 0xC>; + }; + + rtc: rtc { + compatible = "moxa,moxart-rtc"; + gpio-rtc-sclk = <&gpio 5 0>; + gpio-rtc-data = <&gpio 6 0>; + gpio-rtc-reset = <&gpio 7 0>; + }; + + dma: dma@90500000 { + compatible = "moxa,moxart-dma"; + reg = <0x90500080 0x40>; + interrupts = <24 0>; + #dma-cells = <1>; + }; + + watchdog: watchdog@98500000 { + compatible = "moxa,moxart-watchdog"; + reg = <0x98500000 0x10>; + clocks = <&clk_apb>; + }; + + sdhci: sdhci@98e00000 { + compatible = "moxa,moxart-sdhci"; + reg = <0x98e00000 0x5C>; + interrupts = <5 0>; + clocks = <&clk_apb>; + dmas = <&dma 5>, + <&dma 5>; + dma-names = "tx", "rx"; + status = "disabled"; + }; + + mdio0: mdio@90900090 { + compatible = "moxa,moxart-mdio"; + reg = <0x90900090 0x8>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + mdio1: mdio@92000090 { + compatible = "moxa,moxart-mdio"; + reg = <0x92000090 0x8>; + #address-cells = <1>; + #size-cells = <0>; + status = "disabled"; + }; + + mac0: mac@90900000 { + compatible = "moxa,moxart-mac"; + reg = <0x90900000 0x90>; + interrupts = <25 0>; + phy-handle = <ðphy0>; + phy-mode = "mii"; + status = "disabled"; + }; + + mac1: mac@92000000 { + compatible = "moxa,moxart-mac"; + reg = <0x92000000 0x90>; + interrupts = <27 0>; + phy-handle = <ðphy1>; + phy-mode = "mii"; + status = "disabled"; + }; + + uart0: uart@98200000 { + compatible = "ns16550a"; + reg = <0x98200000 0x20>; + interrupts = <31 8>; + reg-shift = <2>; + reg-io-width = <4>; + clock-frequency = <14745600>; + status = "disabled"; + }; + }; +}; diff --git a/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts b/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts index aed83de..fcc5bb6 100644 --- a/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts +++ b/arch/arm/boot/dts/orion5x-lacie-ethernet-disk-mini-v2.dts @@ -58,7 +58,7 @@ status = "okay"; ethphy: ethernet-phy { - device-type = "ethernet-phy"; + device_type = "ethernet-phy"; reg = <8>; }; }; diff --git a/arch/arm/boot/dts/orion5x.dtsi b/arch/arm/boot/dts/orion5x.dtsi index e06c37e..9f51538 100644 --- a/arch/arm/boot/dts/orion5x.dtsi +++ b/arch/arm/boot/dts/orion5x.dtsi @@ -42,6 +42,25 @@ interrupts = <6>, <7>, <8>, <9>; }; + spi@10600 { + compatible = "marvell,orion-spi"; + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + reg = <0x10600 0x28>; + status = "disabled"; + }; + + i2c@11000 { + compatible = "marvell,mv64xxx-i2c"; + reg = <0x11000 0x20>; + #address-cells = <1>; + #size-cells = <0>; + interrupts = <5>; + clock-frequency = <100000>; + status = "disabled"; + }; + serial@12000 { compatible = "ns16550a"; reg = <0x12000 0x100>; @@ -60,15 +79,6 @@ status = "disabled"; }; - spi@10600 { - compatible = "marvell,orion-spi"; - #address-cells = <1>; - #size-cells = <0>; - cell-index = <0>; - reg = <0x10600 0x28>; - status = "disabled"; - }; - wdt@20300 { compatible = "marvell,orion-wdt"; reg = <0x20300 0x28>; @@ -82,30 +92,6 @@ status = "disabled"; }; - ehci@a0000 { - compatible = "marvell,orion-ehci"; - reg = <0xa0000 0x1000>; - interrupts = <12>; - status = "disabled"; - }; - - sata@80000 { - compatible = "marvell,orion-sata"; - reg = <0x80000 0x5000>; - interrupts = <29>; - status = "disabled"; - }; - - i2c@11000 { - compatible = "marvell,mv64xxx-i2c"; - reg = <0x11000 0x20>; - #address-cells = <1>; - #size-cells = <0>; - interrupts = <5>; - clock-frequency = <100000>; - status = "disabled"; - }; - xor@60900 { compatible = "marvell,orion-xor"; reg = <0x60900 0x100 @@ -125,26 +111,6 @@ }; }; - crypto@90000 { - compatible = "marvell,orion-crypto"; - reg = <0x90000 0x10000>, - <0xf2200000 0x800>; - reg-names = "regs", "sram"; - interrupts = <28>; - status = "okay"; - }; - - mdio: mdio-bus@72004 { - compatible = "marvell,orion-mdio"; - #address-cells = <1>; - #size-cells = <0>; - reg = <0x72004 0x84>; - interrupts = <22>; - status = "disabled"; - - /* add phy nodes in board file */ - }; - eth: ethernet-controller@72000 { compatible = "marvell,orion-eth"; #address-cells = <1>; @@ -162,5 +128,39 @@ /* set phy-handle property in board file */ }; }; + + mdio: mdio-bus@72004 { + compatible = "marvell,orion-mdio"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0x72004 0x84>; + interrupts = <22>; + status = "disabled"; + + /* add phy nodes in board file */ + }; + + sata@80000 { + compatible = "marvell,orion-sata"; + reg = <0x80000 0x5000>; + interrupts = <29>; + status = "disabled"; + }; + + crypto@90000 { + compatible = "marvell,orion-crypto"; + reg = <0x90000 0x10000>, + <0xf2200000 0x800>; + reg-names = "regs", "sram"; + interrupts = <28>; + status = "okay"; + }; + + ehci@a0000 { + compatible = "marvell,orion-ehci"; + reg = <0xa0000 0x1000>; + interrupts = <12>; + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/prima2.dtsi b/arch/arm/boot/dts/prima2.dtsi index daee5894..0e21993 100644 --- a/arch/arm/boot/dts/prima2.dtsi +++ b/arch/arm/boot/dts/prima2.dtsi @@ -29,6 +29,15 @@ timebase-frequency = <0>; bus-frequency = <0>; clock-frequency = <0>; + clocks = <&clks 12>; + operating-points = < + /* kHz uV */ + 200000 1025000 + 400000 1025000 + 664000 1050000 + 800000 1100000 + >; + clock-latency = <150000>; }; }; @@ -80,6 +89,7 @@ cphifbg@88030000 { compatible = "sirf,prima2-cphifbg"; reg = <0x88030000 0x1000>; + clocks = <&clks 42>; }; }; @@ -540,6 +550,18 @@ "usp0_uart_nostreamctrl"; }; }; + usp0_only_utfs_pins_a: usp0@2 { + usp0 { + sirf,pins = "usp0_only_utfs_grp"; + sirf,function = "usp0_only_utfs"; + }; + }; + usp0_only_urfs_pins_a: usp0@3 { + usp0 { + sirf,pins = "usp0_only_urfs_grp"; + sirf,function = "usp0_only_urfs"; + }; + }; usp1_pins_a: usp1@0 { usp1 { sirf,pins = "usp1grp"; @@ -648,6 +670,9 @@ compatible = "sirf,prima2-sdhc"; reg = <0x56000000 0x100000>; interrupts = <38>; + status = "disabled"; + bus-width = <8>; + clocks = <&clks 36>; }; sd1: sdhci@56100000 { @@ -655,6 +680,9 @@ compatible = "sirf,prima2-sdhc"; reg = <0x56100000 0x100000>; interrupts = <38>; + status = "disabled"; + bus-width = <4>; + clocks = <&clks 36>; }; sd2: sdhci@56200000 { @@ -662,6 +690,8 @@ compatible = "sirf,prima2-sdhc"; reg = <0x56200000 0x100000>; interrupts = <23>; + status = "disabled"; + clocks = <&clks 37>; }; sd3: sdhci@56300000 { @@ -669,6 +699,8 @@ compatible = "sirf,prima2-sdhc"; reg = <0x56300000 0x100000>; interrupts = <23>; + status = "disabled"; + clocks = <&clks 37>; }; sd4: sdhci@56400000 { @@ -676,6 +708,8 @@ compatible = "sirf,prima2-sdhc"; reg = <0x56400000 0x100000>; interrupts = <39>; + status = "disabled"; + clocks = <&clks 38>; }; sd5: sdhci@56500000 { @@ -683,6 +717,7 @@ compatible = "sirf,prima2-sdhc"; reg = <0x56500000 0x100000>; interrupts = <39>; + clocks = <&clks 38>; }; pci-copy@57900000 { @@ -716,6 +751,12 @@ interrupts = <52 53 54>; }; + minigpsrtc@2000 { + compatible = "sirf,prima2-minigpsrtc"; + reg = <0x2000 0x1000>; + interrupts = <54>; + }; + pwrc@3000 { compatible = "sirf,prima2-pwrc"; reg = <0x3000 0x1000>; diff --git a/arch/arm/boot/dts/pxa27x.dtsi b/arch/arm/boot/dts/pxa27x.dtsi index d7c5d72..a705469 100644 --- a/arch/arm/boot/dts/pxa27x.dtsi +++ b/arch/arm/boot/dts/pxa27x.dtsi @@ -10,5 +10,29 @@ marvell,intc-priority; marvell,intc-nr-irqs = <34>; }; + + pwm0: pwm@40b00000 { + compatible = "marvell,pxa270-pwm", "marvell,pxa250-pwm"; + reg = <0x40b00000 0x10>; + #pwm-cells = <1>; + }; + + pwm1: pwm@40b00010 { + compatible = "marvell,pxa270-pwm", "marvell,pxa250-pwm"; + reg = <0x40b00010 0x10>; + #pwm-cells = <1>; + }; + + pwm2: pwm@40c00000 { + compatible = "marvell,pxa270-pwm", "marvell,pxa250-pwm"; + reg = <0x40c00000 0x10>; + #pwm-cells = <1>; + }; + + pwm3: pwm@40c00010 { + compatible = "marvell,pxa270-pwm", "marvell,pxa250-pwm"; + reg = <0x40c00010 0x10>; + #pwm-cells = <1>; + }; }; }; diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi index 2ebb4f0..6ac9496 100644 --- a/arch/arm/boot/dts/qcom-msm8974.dtsi +++ b/arch/arm/boot/dts/qcom-msm8974.dtsi @@ -29,5 +29,69 @@ <1 1 0xf08>; clock-frequency = <19200000>; }; + + timer@f9020000 { + #address-cells = <1>; + #size-cells = <1>; + ranges; + compatible = "arm,armv7-timer-mem"; + reg = <0xf9020000 0x1000>; + clock-frequency = <19200000>; + + frame@f9021000 { + frame-number = <0>; + interrupts = <0 8 0x4>, + <0 7 0x4>; + reg = <0xf9021000 0x1000>, + <0xf9022000 0x1000>; + }; + + frame@f9023000 { + frame-number = <1>; + interrupts = <0 9 0x4>; + reg = <0xf9023000 0x1000>; + status = "disabled"; + }; + + frame@f9024000 { + frame-number = <2>; + interrupts = <0 10 0x4>; + reg = <0xf9024000 0x1000>; + status = "disabled"; + }; + + frame@f9025000 { + frame-number = <3>; + interrupts = <0 11 0x4>; + reg = <0xf9025000 0x1000>; + status = "disabled"; + }; + + frame@f9026000 { + frame-number = <4>; + interrupts = <0 12 0x4>; + reg = <0xf9026000 0x1000>; + status = "disabled"; + }; + + frame@f9027000 { + frame-number = <5>; + interrupts = <0 13 0x4>; + reg = <0xf9027000 0x1000>; + status = "disabled"; + }; + + frame@f9028000 { + frame-number = <6>; + interrupts = <0 14 0x4>; + reg = <0xf9028000 0x1000>; + status = "disabled"; + }; + }; + + restart@fc4ab000 { + compatible = "qcom,pshold"; + reg = <0xfc4ab000 0x4>; + }; }; }; diff --git a/arch/arm/boot/dts/r7s72100-genmai.dts b/arch/arm/boot/dts/r7s72100-genmai.dts index 1fb20f2..b1deaf7 100644 --- a/arch/arm/boot/dts/r7s72100-genmai.dts +++ b/arch/arm/boot/dts/r7s72100-genmai.dts @@ -9,7 +9,7 @@ */ /dts-v1/; -/include/ "r7s72100.dtsi" +#include "r7s72100.dtsi" / { model = "Genmai"; diff --git a/arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts b/arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts index 9443e93..70b1fff 100644 --- a/arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts +++ b/arch/arm/boot/dts/r8a73a4-ape6evm-reference.dts @@ -9,7 +9,7 @@ */ /dts-v1/; -/include/ "r8a73a4.dtsi" +#include "r8a73a4.dtsi" #include <dt-bindings/gpio/gpio.h> / { @@ -25,6 +25,11 @@ reg = <0 0x40000000 0 0x40000000>; }; + memory@200000000 { + device_type = "memory"; + reg = <2 0x00000000 0 0x40000000>; + }; + vcc_mmc0: regulator@0 { compatible = "regulator-fixed"; regulator-name = "MMC0 Vcc"; @@ -88,22 +93,22 @@ pinctrl-0 = <&scifa0_pins>; pinctrl-names = "default"; - scifa0_pins: scifa0 { + scifa0_pins: serial0 { renesas,groups = "scifa0_data"; renesas,function = "scifa0"; }; - mmc0_pins: mmcif { + mmc0_pins: mmc { renesas,groups = "mmc0_data8", "mmc0_ctrl"; renesas,function = "mmc0"; }; - sdhi0_pins: sdhi0 { + sdhi0_pins: sd0 { renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd"; renesas,function = "sdhi0"; }; - sdhi1_pins: sdhi1 { + sdhi1_pins: sd1 { renesas,groups = "sdhi1_data4", "sdhi1_ctrl"; renesas,function = "sdhi1"; }; diff --git a/arch/arm/boot/dts/r8a73a4-ape6evm.dts b/arch/arm/boot/dts/r8a73a4-ape6evm.dts index 91436b5..ce085fa 100644 --- a/arch/arm/boot/dts/r8a73a4-ape6evm.dts +++ b/arch/arm/boot/dts/r8a73a4-ape6evm.dts @@ -9,7 +9,8 @@ */ /dts-v1/; -/include/ "r8a73a4.dtsi" +#include "r8a73a4.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> / { model = "APE6EVM"; @@ -24,6 +25,11 @@ reg = <0 0x40000000 0 0x40000000>; }; + memory@200000000 { + device_type = "memory"; + reg = <2 0x00000000 0 0x40000000>; + }; + ape6evm_fixed_3v3: fixedregulator@0 { compatible = "regulator-fixed"; regulator-name = "3V3"; @@ -40,7 +46,7 @@ compatible = "smsc,lan9118", "smsc,lan9115"; reg = <0x08000000 0x1000>; interrupt-parent = <&irqc1>; - interrupts = <8 0x4>; + interrupts = <8 IRQ_TYPE_LEVEL_HIGH>; phy-mode = "mii"; reg-io-width = <4>; smsc,irq-active-high; diff --git a/arch/arm/boot/dts/r8a73a4.dtsi b/arch/arm/boot/dts/r8a73a4.dtsi index 287e047..62d0211 100644 --- a/arch/arm/boot/dts/r8a73a4.dtsi +++ b/arch/arm/boot/dts/r8a73a4.dtsi @@ -9,6 +9,9 @@ * kind, whether express or implied. */ +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> + / { compatible = "renesas,r8a73a4"; interrupt-parent = <&gic>; @@ -36,15 +39,15 @@ <0 0xf1002000 0 0x1000>, <0 0xf1004000 0 0x2000>, <0 0xf1006000 0 0x2000>; - interrupts = <1 9 0xf04>; + interrupts = <1 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; }; timer { compatible = "arm,armv7-timer"; - interrupts = <1 13 0xf08>, - <1 14 0xf08>, - <1 11 0xf08>, - <1 10 0xf08>; + interrupts = <1 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <1 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <1 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <1 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; }; irqc0: interrupt-controller@e61c0000 { @@ -53,14 +56,38 @@ interrupt-controller; reg = <0 0xe61c0000 0 0x200>; interrupt-parent = <&gic>; - interrupts = <0 0 4>, <0 1 4>, <0 2 4>, <0 3 4>, - <0 4 4>, <0 5 4>, <0 6 4>, <0 7 4>, - <0 8 4>, <0 9 4>, <0 10 4>, <0 11 4>, - <0 12 4>, <0 13 4>, <0 14 4>, <0 15 4>, - <0 16 4>, <0 17 4>, <0 18 4>, <0 19 4>, - <0 20 4>, <0 21 4>, <0 22 4>, <0 23 4>, - <0 24 4>, <0 25 4>, <0 26 4>, <0 27 4>, - <0 28 4>, <0 29 4>, <0 30 4>, <0 31 4>; + interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>, + <0 1 IRQ_TYPE_LEVEL_HIGH>, + <0 2 IRQ_TYPE_LEVEL_HIGH>, + <0 3 IRQ_TYPE_LEVEL_HIGH>, + <0 4 IRQ_TYPE_LEVEL_HIGH>, + <0 5 IRQ_TYPE_LEVEL_HIGH>, + <0 6 IRQ_TYPE_LEVEL_HIGH>, + <0 7 IRQ_TYPE_LEVEL_HIGH>, + <0 8 IRQ_TYPE_LEVEL_HIGH>, + <0 9 IRQ_TYPE_LEVEL_HIGH>, + <0 10 IRQ_TYPE_LEVEL_HIGH>, + <0 11 IRQ_TYPE_LEVEL_HIGH>, + <0 12 IRQ_TYPE_LEVEL_HIGH>, + <0 13 IRQ_TYPE_LEVEL_HIGH>, + <0 14 IRQ_TYPE_LEVEL_HIGH>, + <0 15 IRQ_TYPE_LEVEL_HIGH>, + <0 16 IRQ_TYPE_LEVEL_HIGH>, + <0 17 IRQ_TYPE_LEVEL_HIGH>, + <0 18 IRQ_TYPE_LEVEL_HIGH>, + <0 19 IRQ_TYPE_LEVEL_HIGH>, + <0 20 IRQ_TYPE_LEVEL_HIGH>, + <0 21 IRQ_TYPE_LEVEL_HIGH>, + <0 22 IRQ_TYPE_LEVEL_HIGH>, + <0 23 IRQ_TYPE_LEVEL_HIGH>, + <0 24 IRQ_TYPE_LEVEL_HIGH>, + <0 25 IRQ_TYPE_LEVEL_HIGH>, + <0 26 IRQ_TYPE_LEVEL_HIGH>, + <0 27 IRQ_TYPE_LEVEL_HIGH>, + <0 28 IRQ_TYPE_LEVEL_HIGH>, + <0 29 IRQ_TYPE_LEVEL_HIGH>, + <0 30 IRQ_TYPE_LEVEL_HIGH>, + <0 31 IRQ_TYPE_LEVEL_HIGH>; }; irqc1: interrupt-controller@e61c0200 { @@ -69,13 +96,32 @@ interrupt-controller; reg = <0 0xe61c0200 0 0x200>; interrupt-parent = <&gic>; - interrupts = <0 32 4>, <0 33 4>, <0 34 4>, <0 35 4>, - <0 36 4>, <0 37 4>, <0 38 4>, <0 39 4>, - <0 40 4>, <0 41 4>, <0 42 4>, <0 43 4>, - <0 44 4>, <0 45 4>, <0 46 4>, <0 47 4>, - <0 48 4>, <0 49 4>, <0 50 4>, <0 51 4>, - <0 52 4>, <0 53 4>, <0 54 4>, <0 55 4>, - <0 56 4>, <0 57 4>; + interrupts = <0 32 IRQ_TYPE_LEVEL_HIGH>, + <0 33 IRQ_TYPE_LEVEL_HIGH>, + <0 34 IRQ_TYPE_LEVEL_HIGH>, + <0 35 IRQ_TYPE_LEVEL_HIGH>, + <0 36 IRQ_TYPE_LEVEL_HIGH>, + <0 37 IRQ_TYPE_LEVEL_HIGH>, + <0 38 IRQ_TYPE_LEVEL_HIGH>, + <0 39 IRQ_TYPE_LEVEL_HIGH>, + <0 40 IRQ_TYPE_LEVEL_HIGH>, + <0 41 IRQ_TYPE_LEVEL_HIGH>, + <0 42 IRQ_TYPE_LEVEL_HIGH>, + <0 43 IRQ_TYPE_LEVEL_HIGH>, + <0 44 IRQ_TYPE_LEVEL_HIGH>, + <0 45 IRQ_TYPE_LEVEL_HIGH>, + <0 46 IRQ_TYPE_LEVEL_HIGH>, + <0 47 IRQ_TYPE_LEVEL_HIGH>, + <0 48 IRQ_TYPE_LEVEL_HIGH>, + <0 49 IRQ_TYPE_LEVEL_HIGH>, + <0 50 IRQ_TYPE_LEVEL_HIGH>, + <0 51 IRQ_TYPE_LEVEL_HIGH>, + <0 52 IRQ_TYPE_LEVEL_HIGH>, + <0 53 IRQ_TYPE_LEVEL_HIGH>, + <0 54 IRQ_TYPE_LEVEL_HIGH>, + <0 55 IRQ_TYPE_LEVEL_HIGH>, + <0 56 IRQ_TYPE_LEVEL_HIGH>, + <0 57 IRQ_TYPE_LEVEL_HIGH>; }; dmac: dma-multiplexer@0 { @@ -91,27 +137,27 @@ compatible = "renesas,shdma-r8a73a4"; reg = <0 0xe6700020 0 0x89e0>; interrupt-parent = <&gic>; - interrupts = <0 220 4 - 0 200 4 - 0 201 4 - 0 202 4 - 0 203 4 - 0 204 4 - 0 205 4 - 0 206 4 - 0 207 4 - 0 208 4 - 0 209 4 - 0 210 4 - 0 211 4 - 0 212 4 - 0 213 4 - 0 214 4 - 0 215 4 - 0 216 4 - 0 217 4 - 0 218 4 - 0 219 4>; + interrupts = <0 220 IRQ_TYPE_LEVEL_HIGH + 0 200 IRQ_TYPE_LEVEL_HIGH + 0 201 IRQ_TYPE_LEVEL_HIGH + 0 202 IRQ_TYPE_LEVEL_HIGH + 0 203 IRQ_TYPE_LEVEL_HIGH + 0 204 IRQ_TYPE_LEVEL_HIGH + 0 205 IRQ_TYPE_LEVEL_HIGH + 0 206 IRQ_TYPE_LEVEL_HIGH + 0 207 IRQ_TYPE_LEVEL_HIGH + 0 208 IRQ_TYPE_LEVEL_HIGH + 0 209 IRQ_TYPE_LEVEL_HIGH + 0 210 IRQ_TYPE_LEVEL_HIGH + 0 211 IRQ_TYPE_LEVEL_HIGH + 0 212 IRQ_TYPE_LEVEL_HIGH + 0 213 IRQ_TYPE_LEVEL_HIGH + 0 214 IRQ_TYPE_LEVEL_HIGH + 0 215 IRQ_TYPE_LEVEL_HIGH + 0 216 IRQ_TYPE_LEVEL_HIGH + 0 217 IRQ_TYPE_LEVEL_HIGH + 0 218 IRQ_TYPE_LEVEL_HIGH + 0 219 IRQ_TYPE_LEVEL_HIGH>; interrupt-names = "error", "ch0", "ch1", "ch2", "ch3", "ch4", "ch5", "ch6", "ch7", @@ -126,7 +172,7 @@ reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>, <0 0xe61f0200 0 0x38>, <0 0xe61f0300 0 0x38>; interrupt-parent = <&gic>; - interrupts = <0 69 4>; + interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>; }; i2c0: i2c@e6500000 { @@ -135,7 +181,7 @@ compatible = "renesas,rmobile-iic"; reg = <0 0xe6500000 0 0x428>; interrupt-parent = <&gic>; - interrupts = <0 174 0x4>; + interrupts = <0 174 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -145,7 +191,7 @@ compatible = "renesas,rmobile-iic"; reg = <0 0xe6510000 0 0x428>; interrupt-parent = <&gic>; - interrupts = <0 175 0x4>; + interrupts = <0 175 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -155,7 +201,7 @@ compatible = "renesas,rmobile-iic"; reg = <0 0xe6520000 0 0x428>; interrupt-parent = <&gic>; - interrupts = <0 176 0x4>; + interrupts = <0 176 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -165,7 +211,7 @@ compatible = "renesas,rmobile-iic"; reg = <0 0xe6530000 0 0x428>; interrupt-parent = <&gic>; - interrupts = <0 177 0x4>; + interrupts = <0 177 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -175,7 +221,7 @@ compatible = "renesas,rmobile-iic"; reg = <0 0xe6540000 0 0x428>; interrupt-parent = <&gic>; - interrupts = <0 178 0x4>; + interrupts = <0 178 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -185,7 +231,7 @@ compatible = "renesas,rmobile-iic"; reg = <0 0xe60b0000 0 0x428>; interrupt-parent = <&gic>; - interrupts = <0 179 0x4>; + interrupts = <0 179 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -195,7 +241,7 @@ compatible = "renesas,rmobile-iic"; reg = <0 0xe6550000 0 0x428>; interrupt-parent = <&gic>; - interrupts = <0 184 0x4>; + interrupts = <0 184 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -205,7 +251,7 @@ compatible = "renesas,rmobile-iic"; reg = <0 0xe6560000 0 0x428>; interrupt-parent = <&gic>; - interrupts = <0 185 0x4>; + interrupts = <0 185 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -215,24 +261,24 @@ compatible = "renesas,rmobile-iic"; reg = <0 0xe6570000 0 0x428>; interrupt-parent = <&gic>; - interrupts = <0 173 0x4>; + interrupts = <0 173 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; - mmcif0: mmcif@ee200000 { + mmcif0: mmc@ee200000 { compatible = "renesas,sh-mmcif"; reg = <0 0xee200000 0 0x80>; interrupt-parent = <&gic>; - interrupts = <0 169 0x4>; + interrupts = <0 169 IRQ_TYPE_LEVEL_HIGH>; reg-io-width = <4>; status = "disabled"; }; - mmcif1: mmcif@ee220000 { + mmcif1: mmc@ee220000 { compatible = "renesas,sh-mmcif"; reg = <0 0xee220000 0 0x80>; interrupt-parent = <&gic>; - interrupts = <0 170 0x4>; + interrupts = <0 170 IRQ_TYPE_LEVEL_HIGH>; reg-io-width = <4>; status = "disabled"; }; @@ -242,31 +288,47 @@ reg = <0 0xe6050000 0 0x9000>; gpio-controller; #gpio-cells = <2>; + interrupts-extended = + <&irqc0 0 0>, <&irqc0 1 0>, <&irqc0 2 0>, <&irqc0 3 0>, + <&irqc0 4 0>, <&irqc0 5 0>, <&irqc0 6 0>, <&irqc0 7 0>, + <&irqc0 8 0>, <&irqc0 9 0>, <&irqc0 10 0>, <&irqc0 11 0>, + <&irqc0 12 0>, <&irqc0 13 0>, <&irqc0 14 0>, <&irqc0 15 0>, + <&irqc0 16 0>, <&irqc0 17 0>, <&irqc0 18 0>, <&irqc0 19 0>, + <&irqc0 20 0>, <&irqc0 21 0>, <&irqc0 22 0>, <&irqc0 23 0>, + <&irqc0 24 0>, <&irqc0 25 0>, <&irqc0 26 0>, <&irqc0 27 0>, + <&irqc0 28 0>, <&irqc0 29 0>, <&irqc0 30 0>, <&irqc0 31 0>, + <&irqc1 0 0>, <&irqc1 1 0>, <&irqc1 2 0>, <&irqc1 3 0>, + <&irqc1 4 0>, <&irqc1 5 0>, <&irqc1 6 0>, <&irqc1 7 0>, + <&irqc1 8 0>, <&irqc1 9 0>, <&irqc1 10 0>, <&irqc1 11 0>, + <&irqc1 12 0>, <&irqc1 13 0>, <&irqc1 14 0>, <&irqc1 15 0>, + <&irqc1 16 0>, <&irqc1 17 0>, <&irqc1 18 0>, <&irqc1 19 0>, + <&irqc1 20 0>, <&irqc1 21 0>, <&irqc1 22 0>, <&irqc1 23 0>, + <&irqc1 24 0>, <&irqc1 25 0>; }; - sdhi0: sdhi@ee100000 { + sdhi0: sd@ee100000 { compatible = "renesas,sdhi-r8a73a4"; reg = <0 0xee100000 0 0x100>; interrupt-parent = <&gic>; - interrupts = <0 165 4>; + interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>; cap-sd-highspeed; status = "disabled"; }; - sdhi1: sdhi@ee120000 { + sdhi1: sd@ee120000 { compatible = "renesas,sdhi-r8a73a4"; reg = <0 0xee120000 0 0x100>; interrupt-parent = <&gic>; - interrupts = <0 166 4>; + interrupts = <0 166 IRQ_TYPE_LEVEL_HIGH>; cap-sd-highspeed; status = "disabled"; }; - sdhi2: sdhi@ee140000 { + sdhi2: sd@ee140000 { compatible = "renesas,sdhi-r8a73a4"; reg = <0 0xee140000 0 0x100>; interrupt-parent = <&gic>; - interrupts = <0 167 4>; + interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH>; cap-sd-highspeed; status = "disabled"; }; diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts index 1c56c5e..95a849b 100644 --- a/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts +++ b/arch/arm/boot/dts/r8a7740-armadillo800eva-reference.dts @@ -9,8 +9,9 @@ */ /dts-v1/; -/include/ "r8a7740.dtsi" +#include "r8a7740.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> #include <dt-bindings/pwm/pwm.h> / { @@ -62,6 +63,44 @@ enable-active-high; }; + reg_5p0v: regulator@3 { + compatible = "regulator-fixed"; + regulator-name = "fixed-5.0V"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + regulator-boot-on; + }; + + gpio-keys { + compatible = "gpio-keys"; + + power-key { + gpios = <&pfc 99 GPIO_ACTIVE_LOW>; + linux,code = <116>; + label = "SW3"; + gpio-key,wakeup; + }; + + back-key { + gpios = <&pfc 100 GPIO_ACTIVE_LOW>; + linux,code = <158>; + label = "SW4"; + }; + + menu-key { + gpios = <&pfc 97 GPIO_ACTIVE_LOW>; + linux,code = <139>; + label = "SW5"; + }; + + home-key { + gpios = <&pfc 98 GPIO_ACTIVE_LOW>; + linux,code = <102>; + label = "SW6"; + }; + }; + leds { compatible = "gpio-leds"; led1 { @@ -85,32 +124,58 @@ default-brightness-level = <9>; pinctrl-0 = <&backlight_pins>; pinctrl-names = "default"; + power-supply = <®_5p0v>; + enable-gpios = <&pfc 61 GPIO_ACTIVE_HIGH>; + }; + + sound { + compatible = "simple-audio-card"; + + simple-audio-card,format = "i2s"; + + simple-audio-card,cpu { + sound-dai = <&sh_fsi2 0>; + bitclock-inversion; + }; + + simple-audio-card,codec { + sound-dai = <&wm8978>; + bitclock-master; + frame-master; + system-clock-frequency = <12288000>; + }; }; }; &i2c0 { status = "okay"; - touchscreen: st1232@55 { + touchscreen@55 { compatible = "sitronix,st1232"; reg = <0x55>; interrupt-parent = <&irqpin1>; - interrupts = <2 0>; /* IRQ10: hwirq 2 on irqpin1 */ + interrupts = <2 IRQ_TYPE_LEVEL_LOW>; pinctrl-0 = <&st1232_pins>; pinctrl-names = "default"; gpios = <&pfc 166 GPIO_ACTIVE_LOW>; }; + + wm8978: wm8978@1a { + #sound-dai-cells = <0>; + compatible = "wlf,wm8978"; + reg = <0x1a>; + }; }; &pfc { pinctrl-0 = <&scifa1_pins>; pinctrl-names = "default"; - scifa1_pins: scifa1 { + scifa1_pins: serial1 { renesas,groups = "scifa1_data"; renesas,function = "scifa1"; }; - st1232_pins: st1232 { + st1232_pins: touchscreen { renesas,groups = "intc_irq10"; renesas,function = "intc"; }; @@ -125,10 +190,16 @@ renesas,function = "mmc0"; }; - sdhi0_pins: sdhi0 { + sdhi0_pins: sd0 { renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_wp"; renesas,function = "sdhi0"; }; + + fsia_pins: sounda { + renesas,groups = "fsia_sclk_in", "fsia_mclk_out", + "fsia_data_in_1", "fsia_data_out_0"; + renesas,function = "fsia"; + }; }; &tpu { @@ -155,3 +226,10 @@ cd-gpios = <&pfc 167 GPIO_ACTIVE_LOW>; status = "okay"; }; + +&sh_fsi2 { + pinctrl-0 = <&fsia_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; diff --git a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts index 426cd9c..a06a11e 100644 --- a/arch/arm/boot/dts/r8a7740-armadillo800eva.dts +++ b/arch/arm/boot/dts/r8a7740-armadillo800eva.dts @@ -9,7 +9,7 @@ */ /dts-v1/; -/include/ "r8a7740.dtsi" +#include "r8a7740.dtsi" / { model = "armadillo 800 eva"; diff --git a/arch/arm/boot/dts/r8a7740.dtsi b/arch/arm/boot/dts/r8a7740.dtsi index ae1e230..8280884 100644 --- a/arch/arm/boot/dts/r8a7740.dtsi +++ b/arch/arm/boot/dts/r8a7740.dtsi @@ -10,6 +10,8 @@ /include/ "skeleton.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> + / { compatible = "renesas,r8a7740"; @@ -34,12 +36,12 @@ pmu { compatible = "arm,cortex-a9-pmu"; - interrupts = <0 83 4>; + interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH>; }; /* irqpin0: IRQ0 - IRQ7 */ irqpin0: irqpin@e6900000 { - compatible = "renesas,intc-irqpin"; + compatible = "renesas,intc-irqpin-r8a7740", "renesas,intc-irqpin"; #interrupt-cells = <2>; interrupt-controller; reg = <0xe6900000 4>, @@ -48,19 +50,19 @@ <0xe6900040 1>, <0xe6900060 1>; interrupt-parent = <&gic>; - interrupts = <0 149 0x4 - 0 149 0x4 - 0 149 0x4 - 0 149 0x4 - 0 149 0x4 - 0 149 0x4 - 0 149 0x4 - 0 149 0x4>; + interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH + 0 149 IRQ_TYPE_LEVEL_HIGH + 0 149 IRQ_TYPE_LEVEL_HIGH + 0 149 IRQ_TYPE_LEVEL_HIGH + 0 149 IRQ_TYPE_LEVEL_HIGH + 0 149 IRQ_TYPE_LEVEL_HIGH + 0 149 IRQ_TYPE_LEVEL_HIGH + 0 149 IRQ_TYPE_LEVEL_HIGH>; }; /* irqpin1: IRQ8 - IRQ15 */ irqpin1: irqpin@e6900004 { - compatible = "renesas,intc-irqpin"; + compatible = "renesas,intc-irqpin-r8a7740", "renesas,intc-irqpin"; #interrupt-cells = <2>; interrupt-controller; reg = <0xe6900004 4>, @@ -69,19 +71,19 @@ <0xe6900044 1>, <0xe6900064 1>; interrupt-parent = <&gic>; - interrupts = <0 149 0x4 - 0 149 0x4 - 0 149 0x4 - 0 149 0x4 - 0 149 0x4 - 0 149 0x4 - 0 149 0x4 - 0 149 0x4>; + interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH + 0 149 IRQ_TYPE_LEVEL_HIGH + 0 149 IRQ_TYPE_LEVEL_HIGH + 0 149 IRQ_TYPE_LEVEL_HIGH + 0 149 IRQ_TYPE_LEVEL_HIGH + 0 149 IRQ_TYPE_LEVEL_HIGH + 0 149 IRQ_TYPE_LEVEL_HIGH + 0 149 IRQ_TYPE_LEVEL_HIGH>; }; /* irqpin2: IRQ16 - IRQ23 */ irqpin2: irqpin@e6900008 { - compatible = "renesas,intc-irqpin"; + compatible = "renesas,intc-irqpin-r8a7740", "renesas,intc-irqpin"; #interrupt-cells = <2>; interrupt-controller; reg = <0xe6900008 4>, @@ -90,19 +92,19 @@ <0xe6900048 1>, <0xe6900068 1>; interrupt-parent = <&gic>; - interrupts = <0 149 0x4 - 0 149 0x4 - 0 149 0x4 - 0 149 0x4 - 0 149 0x4 - 0 149 0x4 - 0 149 0x4 - 0 149 0x4>; + interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH + 0 149 IRQ_TYPE_LEVEL_HIGH + 0 149 IRQ_TYPE_LEVEL_HIGH + 0 149 IRQ_TYPE_LEVEL_HIGH + 0 149 IRQ_TYPE_LEVEL_HIGH + 0 149 IRQ_TYPE_LEVEL_HIGH + 0 149 IRQ_TYPE_LEVEL_HIGH + 0 149 IRQ_TYPE_LEVEL_HIGH>; }; /* irqpin3: IRQ24 - IRQ31 */ irqpin3: irqpin@e690000c { - compatible = "renesas,intc-irqpin"; + compatible = "renesas,intc-irqpin-r8a7740", "renesas,intc-irqpin"; #interrupt-cells = <2>; interrupt-controller; reg = <0xe690000c 4>, @@ -111,14 +113,14 @@ <0xe690004c 1>, <0xe690006c 1>; interrupt-parent = <&gic>; - interrupts = <0 149 0x4 - 0 149 0x4 - 0 149 0x4 - 0 149 0x4 - 0 149 0x4 - 0 149 0x4 - 0 149 0x4 - 0 149 0x4>; + interrupts = <0 149 IRQ_TYPE_LEVEL_HIGH + 0 149 IRQ_TYPE_LEVEL_HIGH + 0 149 IRQ_TYPE_LEVEL_HIGH + 0 149 IRQ_TYPE_LEVEL_HIGH + 0 149 IRQ_TYPE_LEVEL_HIGH + 0 149 IRQ_TYPE_LEVEL_HIGH + 0 149 IRQ_TYPE_LEVEL_HIGH + 0 149 IRQ_TYPE_LEVEL_HIGH>; }; i2c0: i2c@fff20000 { @@ -127,10 +129,10 @@ compatible = "renesas,rmobile-iic"; reg = <0xfff20000 0x425>; interrupt-parent = <&gic>; - interrupts = <0 201 0x4 - 0 202 0x4 - 0 203 0x4 - 0 204 0x4>; + interrupts = <0 201 IRQ_TYPE_LEVEL_HIGH + 0 202 IRQ_TYPE_LEVEL_HIGH + 0 203 IRQ_TYPE_LEVEL_HIGH + 0 204 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -140,10 +142,10 @@ compatible = "renesas,rmobile-iic"; reg = <0xe6c20000 0x425>; interrupt-parent = <&gic>; - interrupts = <0 70 0x4 - 0 71 0x4 - 0 72 0x4 - 0 73 0x4>; + interrupts = <0 70 IRQ_TYPE_LEVEL_HIGH + 0 71 IRQ_TYPE_LEVEL_HIGH + 0 72 IRQ_TYPE_LEVEL_HIGH + 0 73 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -153,6 +155,15 @@ <0xe605800c 0x20>; gpio-controller; #gpio-cells = <2>; + interrupts-extended = + <&irqpin0 0 0>, <&irqpin0 1 0>, <&irqpin0 2 0>, <&irqpin0 3 0>, + <&irqpin0 4 0>, <&irqpin0 5 0>, <&irqpin0 6 0>, <&irqpin0 7 0>, + <&irqpin1 0 0>, <&irqpin1 1 0>, <&irqpin1 2 0>, <&irqpin1 3 0>, + <&irqpin1 4 0>, <&irqpin1 5 0>, <&irqpin1 6 0>, <&irqpin1 7 0>, + <&irqpin2 0 0>, <&irqpin2 1 0>, <&irqpin2 2 0>, <&irqpin2 3 0>, + <&irqpin2 4 0>, <&irqpin2 5 0>, <&irqpin2 6 0>, <&irqpin2 7 0>, + <&irqpin3 0 0>, <&irqpin3 1 0>, <&irqpin3 2 0>, <&irqpin3 3 0>, + <&irqpin3 4 0>, <&irqpin3 5 0>, <&irqpin3 6 0>, <&irqpin3 7 0>; }; tpu: pwm@e6600000 { @@ -162,36 +173,57 @@ #pwm-cells = <3>; }; - mmcif0: mmcif@e6bd0000 { + mmcif0: mmc@e6bd0000 { compatible = "renesas,sh-mmcif"; reg = <0xe6bd0000 0x100>; interrupt-parent = <&gic>; - interrupts = <0 56 4 - 0 57 4>; + interrupts = <0 56 IRQ_TYPE_LEVEL_HIGH + 0 57 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; - sdhi0: sdhi@e6850000 { + sdhi0: sd@e6850000 { compatible = "renesas,sdhi-r8a7740"; reg = <0xe6850000 0x100>; interrupt-parent = <&gic>; - interrupts = <0 117 4 - 0 118 4 - 0 119 4>; + interrupts = <0 117 IRQ_TYPE_LEVEL_HIGH + 0 118 IRQ_TYPE_LEVEL_HIGH + 0 119 IRQ_TYPE_LEVEL_HIGH>; cap-sd-highspeed; cap-sdio-irq; status = "disabled"; }; - sdhi1: sdhi@e6860000 { + sdhi1: sd@e6860000 { compatible = "renesas,sdhi-r8a7740"; reg = <0xe6860000 0x100>; interrupt-parent = <&gic>; - interrupts = <0 121 4 - 0 122 4 - 0 123 4>; + interrupts = <0 121 IRQ_TYPE_LEVEL_HIGH + 0 122 IRQ_TYPE_LEVEL_HIGH + 0 123 IRQ_TYPE_LEVEL_HIGH>; + cap-sd-highspeed; + cap-sdio-irq; + status = "disabled"; + }; + + sdhi2: sd@e6870000 { + compatible = "renesas,sdhi-r8a7740"; + reg = <0xe6870000 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 125 IRQ_TYPE_LEVEL_HIGH + 0 126 IRQ_TYPE_LEVEL_HIGH + 0 127 IRQ_TYPE_LEVEL_HIGH>; cap-sd-highspeed; cap-sdio-irq; status = "disabled"; }; + + sh_fsi2: sound@fe1f0000 { + #sound-dai-cells = <1>; + compatible = "renesas,sh_fsi2"; + reg = <0xfe1f0000 0x400>; + interrupt-parent = <&gic>; + interrupts = <0 9 0x4>; + status = "disabled"; + }; }; diff --git a/arch/arm/boot/dts/r8a7778-bockw-reference.dts b/arch/arm/boot/dts/r8a7778-bockw-reference.dts index 969e386..bb62c7a 100644 --- a/arch/arm/boot/dts/r8a7778-bockw-reference.dts +++ b/arch/arm/boot/dts/r8a7778-bockw-reference.dts @@ -15,7 +15,8 @@ */ /dts-v1/; -/include/ "r8a7778.dtsi" +#include "r8a7778.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> / { model = "bockw"; @@ -45,13 +46,65 @@ phy-mode = "mii"; interrupt-parent = <&irqpin>; - interrupts = <0 0>; /* IRQ0: hwirq 0 on irqpin */ + interrupts = <0 IRQ_TYPE_EDGE_FALLING>; reg-io-width = <4>; vddvario-supply = <&fixedregulator3v3>; vdd33a-supply = <&fixedregulator3v3>; }; + +}; + +&mmcif { + pinctrl-0 = <&mmc_pins>; + pinctrl-names = "default"; + + vmmc-supply = <&fixedregulator3v3>; + bus-width = <8>; + broken-cd; + status = "okay"; }; &irqpin { status = "okay"; }; + +&pfc { + pinctrl-0 = <&scif0_pins>; + pinctrl-names = "default"; + + scif0_pins: serial0 { + renesas,groups = "scif0_data_a", "scif0_ctrl"; + renesas,function = "scif0"; + }; + + mmc_pins: mmc { + renesas,groups = "mmc_data8", "mmc_ctrl"; + renesas,function = "mmc"; + }; + + sdhi0_pins: sd0 { + renesas,groups = "sdhi0_data4", "sdhi0_ctrl", + "sdhi0_cd", "sdhi0_wp"; + renesas,function = "sdhi0"; + }; + + hspi0_pins: hspi0 { + renesas,groups = "hspi0_a"; + renesas,function = "hspi0"; + }; +}; + +&sdhi0 { + pinctrl-0 = <&sdhi0_pins>; + pinctrl-names = "default"; + + vmmc-supply = <&fixedregulator3v3>; + bus-width = <4>; + status = "okay"; +}; + +&hspi0 { + pinctrl-0 = <&hspi0_pins>; + pinctrl-names = "default"; + status = "okay"; +}; diff --git a/arch/arm/boot/dts/r8a7778-bockw.dts b/arch/arm/boot/dts/r8a7778-bockw.dts index 12bbebc..46a884d 100644 --- a/arch/arm/boot/dts/r8a7778-bockw.dts +++ b/arch/arm/boot/dts/r8a7778-bockw.dts @@ -15,7 +15,7 @@ */ /dts-v1/; -/include/ "r8a7778.dtsi" +#include "r8a7778.dtsi" / { model = "bockw"; diff --git a/arch/arm/boot/dts/r8a7778.dtsi b/arch/arm/boot/dts/r8a7778.dtsi index a6308a3..ddb3bd7 100644 --- a/arch/arm/boot/dts/r8a7778.dtsi +++ b/arch/arm/boot/dts/r8a7778.dtsi @@ -16,6 +16,8 @@ /include/ "skeleton.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> + / { compatible = "renesas,r8a7778"; @@ -25,6 +27,12 @@ }; }; + aliases { + spi0 = &hspi0; + spi1 = &hspi1; + spi2 = &hspi2; + }; + gic: interrupt-controller@fe438000 { compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; @@ -35,7 +43,7 @@ /* irqpin: IRQ0 - IRQ3 */ irqpin: irqpin@fe78001c { - compatible = "renesas,intc-irqpin"; + compatible = "renesas,intc-irqpin-r8a7778", "renesas,intc-irqpin"; #interrupt-cells = <2>; interrupt-controller; status = "disabled"; /* default off */ @@ -45,10 +53,10 @@ <0xfe780044 4>, <0xfe780064 4>; interrupt-parent = <&gic>; - interrupts = <0 27 0x4 - 0 28 0x4 - 0 29 0x4 - 0 30 0x4>; + interrupts = <0 27 IRQ_TYPE_LEVEL_HIGH + 0 28 IRQ_TYPE_LEVEL_HIGH + 0 29 IRQ_TYPE_LEVEL_HIGH + 0 30 IRQ_TYPE_LEVEL_HIGH>; sense-bitfield-width = <2>; }; @@ -56,7 +64,7 @@ compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar"; reg = <0xffc40000 0x2c>; interrupt-parent = <&gic>; - interrupts = <0 103 0x4>; + interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 0 32>; @@ -68,7 +76,7 @@ compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar"; reg = <0xffc41000 0x2c>; interrupt-parent = <&gic>; - interrupts = <0 103 0x4>; + interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 32 32>; @@ -80,7 +88,7 @@ compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar"; reg = <0xffc42000 0x2c>; interrupt-parent = <&gic>; - interrupts = <0 103 0x4>; + interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 64 32>; @@ -92,7 +100,7 @@ compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar"; reg = <0xffc43000 0x2c>; interrupt-parent = <&gic>; - interrupts = <0 103 0x4>; + interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 96 32>; @@ -104,7 +112,7 @@ compatible = "renesas,gpio-r8a7778", "renesas,gpio-rcar"; reg = <0xffc44000 0x2c>; interrupt-parent = <&gic>; - interrupts = <0 103 0x4>; + interrupts = <0 103 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 128 27>; @@ -114,6 +122,148 @@ pfc: pfc@fffc0000 { compatible = "renesas,pfc-r8a7778"; - reg = <0xfffc000 0x118>; + reg = <0xfffc0000 0x118>; + }; + + i2c0: i2c@ffc70000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7778"; + reg = <0xffc70000 0x1000>; + interrupt-parent = <&gic>; + interrupts = <0 67 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + i2c1: i2c@ffc71000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7778"; + reg = <0xffc71000 0x1000>; + interrupt-parent = <&gic>; + interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + i2c2: i2c@ffc72000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7778"; + reg = <0xffc72000 0x1000>; + interrupt-parent = <&gic>; + interrupts = <0 76 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + i2c3: i2c@ffc73000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7778"; + reg = <0xffc73000 0x1000>; + interrupt-parent = <&gic>; + interrupts = <0 77 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + mmcif: mmc@ffe4e000 { + compatible = "renesas,sh-mmcif"; + reg = <0xffe4e000 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 61 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + sdhi0: sd@ffe4c000 { + compatible = "renesas,sdhi-r8a7778"; + reg = <0xffe4c000 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 87 IRQ_TYPE_LEVEL_HIGH>; + cap-sd-highspeed; + cap-sdio-irq; + status = "disabled"; + }; + + sdhi1: sd@ffe4d000 { + compatible = "renesas,sdhi-r8a7778"; + reg = <0xffe4d000 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH>; + cap-sd-highspeed; + cap-sdio-irq; + status = "disabled"; + }; + + sdhi2: sd@ffe4f000 { + compatible = "renesas,sdhi-r8a7778"; + reg = <0xffe4f000 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>; + cap-sd-highspeed; + cap-sdio-irq; + status = "disabled"; + }; + + i2c0: i2c@ffc70000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7778"; + reg = <0xffc70000 0x1000>; + interrupt-parent = <&gic>; + interrupts = <0 67 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + i2c1: i2c@ffc71000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7778"; + reg = <0xffc71000 0x1000>; + interrupt-parent = <&gic>; + interrupts = <0 78 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + i2c2: i2c@ffc72000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7778"; + reg = <0xffc72000 0x1000>; + interrupt-parent = <&gic>; + interrupts = <0 76 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + i2c3: i2c@ffc73000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "renesas,i2c-r8a7778"; + reg = <0xffc73000 0x1000>; + interrupt-parent = <&gic>; + interrupts = <0 77 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + hspi0: spi@fffc7000 { + compatible = "renesas,hspi"; + reg = <0xfffc7000 0x18>; + interrupt-controller = <&gic>; + interrupts = <0 63 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + hspi1: spi@fffc8000 { + compatible = "renesas,hspi"; + reg = <0xfffc8000 0x18>; + interrupt-controller = <&gic>; + interrupts = <0 84 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + hspi2: spi@fffc6000 { + compatible = "renesas,hspi"; + reg = <0xfffc6000 0x18>; + interrupt-controller = <&gic>; + interrupts = <0 85 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/r8a7779-marzen-reference.dts b/arch/arm/boot/dts/r8a7779-marzen-reference.dts index ab4110a..76f5eef 100644 --- a/arch/arm/boot/dts/r8a7779-marzen-reference.dts +++ b/arch/arm/boot/dts/r8a7779-marzen-reference.dts @@ -10,8 +10,9 @@ */ /dts-v1/; -/include/ "r8a7779.dtsi" +#include "r8a7779.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> / { model = "marzen"; @@ -43,7 +44,7 @@ phy-mode = "mii"; interrupt-parent = <&irqpin0>; - interrupts = <1 0>; /* IRQ1: hwirq 1 on irqpin0 */ + interrupts = <1 IRQ_TYPE_EDGE_FALLING>; reg-io-width = <4>; vddvario-supply = <&fixedregulator3v3>; vdd33a-supply = <&fixedregulator3v3>; @@ -68,7 +69,7 @@ }; &pfc { - pinctrl-0 = <&scif2_pins &scif4_pins &sdhi0_pins>; + pinctrl-0 = <&scif2_pins &scif4_pins>; pinctrl-names = "default"; lan0_pins: lan0 { @@ -82,19 +83,38 @@ }; }; - scif2_pins: scif2 { + scif2_pins: serial2 { renesas,groups = "scif2_data_c"; renesas,function = "scif2"; }; - scif4_pins: scif4 { + scif4_pins: serial4 { renesas,groups = "scif4_data"; renesas,function = "scif4"; }; - sdhi0_pins: sdhi0 { - renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd", - "sdhi0_wp"; + sdhi0_pins: sd0 { + renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd"; renesas,function = "sdhi0"; }; + + hspi0_pins: hspi0 { + renesas,groups = "hspi0"; + renesas,function = "hspi0"; + }; +}; + +&sdhi0 { + pinctrl-0 = <&sdhi0_pins>; + pinctrl-names = "default"; + + vmmc-supply = <&fixedregulator3v3>; + bus-width = <4>; + status = "okay"; +}; + +&hspi0 { + pinctrl-0 = <&hspi0_pins>; + pinctrl-names = "default"; + status = "okay"; }; diff --git a/arch/arm/boot/dts/r8a7779-marzen.dts b/arch/arm/boot/dts/r8a7779-marzen.dts index f3f7f79..a7af2c2 100644 --- a/arch/arm/boot/dts/r8a7779-marzen.dts +++ b/arch/arm/boot/dts/r8a7779-marzen.dts @@ -10,7 +10,7 @@ */ /dts-v1/; -/include/ "r8a7779.dtsi" +#include "r8a7779.dtsi" / { model = "marzen"; diff --git a/arch/arm/boot/dts/r8a7779.dtsi b/arch/arm/boot/dts/r8a7779.dtsi index 19faeac..d0561d4 100644 --- a/arch/arm/boot/dts/r8a7779.dtsi +++ b/arch/arm/boot/dts/r8a7779.dtsi @@ -11,6 +11,8 @@ /include/ "skeleton.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> + / { compatible = "renesas,r8a7779"; @@ -40,6 +42,12 @@ }; }; + aliases { + spi0 = &hspi0; + spi1 = &hspi1; + spi2 = &hspi2; + }; + gic: interrupt-controller@f0001000 { compatible = "arm,cortex-a9-gic"; #interrupt-cells = <3>; @@ -52,7 +60,7 @@ compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; reg = <0xffc40000 0x2c>; interrupt-parent = <&gic>; - interrupts = <0 141 0x4>; + interrupts = <0 141 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 0 32>; @@ -64,7 +72,7 @@ compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; reg = <0xffc41000 0x2c>; interrupt-parent = <&gic>; - interrupts = <0 142 0x4>; + interrupts = <0 142 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 32 32>; @@ -76,7 +84,7 @@ compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; reg = <0xffc42000 0x2c>; interrupt-parent = <&gic>; - interrupts = <0 143 0x4>; + interrupts = <0 143 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 64 32>; @@ -88,7 +96,7 @@ compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; reg = <0xffc43000 0x2c>; interrupt-parent = <&gic>; - interrupts = <0 144 0x4>; + interrupts = <0 144 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 96 32>; @@ -100,7 +108,7 @@ compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; reg = <0xffc44000 0x2c>; interrupt-parent = <&gic>; - interrupts = <0 145 0x4>; + interrupts = <0 145 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 128 32>; @@ -112,7 +120,7 @@ compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; reg = <0xffc45000 0x2c>; interrupt-parent = <&gic>; - interrupts = <0 146 0x4>; + interrupts = <0 146 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 160 32>; @@ -124,7 +132,7 @@ compatible = "renesas,gpio-r8a7779", "renesas,gpio-rcar"; reg = <0xffc46000 0x2c>; interrupt-parent = <&gic>; - interrupts = <0 147 0x4>; + interrupts = <0 147 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 192 9>; @@ -133,7 +141,7 @@ }; irqpin0: irqpin@fe780010 { - compatible = "renesas,intc-irqpin"; + compatible = "renesas,intc-irqpin-r8a7779", "renesas,intc-irqpin"; #interrupt-cells = <2>; status = "disabled"; interrupt-controller; @@ -143,50 +151,50 @@ <0xfe780044 4>, <0xfe780064 4>; interrupt-parent = <&gic>; - interrupts = <0 27 0x4 - 0 28 0x4 - 0 29 0x4 - 0 30 0x4>; + interrupts = <0 27 IRQ_TYPE_LEVEL_HIGH + 0 28 IRQ_TYPE_LEVEL_HIGH + 0 29 IRQ_TYPE_LEVEL_HIGH + 0 30 IRQ_TYPE_LEVEL_HIGH>; sense-bitfield-width = <2>; }; i2c0: i2c@ffc70000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,rmobile-iic"; + compatible = "renesas,i2c-r8a7779"; reg = <0xffc70000 0x1000>; interrupt-parent = <&gic>; - interrupts = <0 79 0x4>; + interrupts = <0 79 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; i2c1: i2c@ffc71000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,rmobile-iic"; + compatible = "renesas,i2c-r8a7779"; reg = <0xffc71000 0x1000>; interrupt-parent = <&gic>; - interrupts = <0 82 0x4>; + interrupts = <0 82 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; i2c2: i2c@ffc72000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,rmobile-iic"; + compatible = "renesas,i2c-r8a7779"; reg = <0xffc72000 0x1000>; interrupt-parent = <&gic>; - interrupts = <0 80 0x4>; + interrupts = <0 80 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; i2c3: i2c@ffc73000 { #address-cells = <1>; #size-cells = <0>; - compatible = "renesas,rmobile-iic"; + compatible = "renesas,i2c-r8a7779"; reg = <0xffc73000 0x1000>; interrupt-parent = <&gic>; - interrupts = <0 81 0x4>; + interrupts = <0 81 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -204,6 +212,70 @@ compatible = "renesas,rcar-sata"; reg = <0xfc600000 0x2000>; interrupt-parent = <&gic>; - interrupts = <0 100 0x4>; + interrupts = <0 100 IRQ_TYPE_LEVEL_HIGH>; + }; + + sdhi0: sd@ffe4c000 { + compatible = "renesas,sdhi-r8a7779"; + reg = <0xffe4c000 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH>; + cap-sd-highspeed; + cap-sdio-irq; + status = "disabled"; + }; + + sdhi1: sd@ffe4d000 { + compatible = "renesas,sdhi-r8a7779"; + reg = <0xffe4d000 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 105 IRQ_TYPE_LEVEL_HIGH>; + cap-sd-highspeed; + cap-sdio-irq; + status = "disabled"; + }; + + sdhi2: sd@ffe4e000 { + compatible = "renesas,sdhi-r8a7779"; + reg = <0xffe4e000 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 107 IRQ_TYPE_LEVEL_HIGH>; + cap-sd-highspeed; + cap-sdio-irq; + status = "disabled"; + }; + + sdhi3: sd@ffe4f000 { + compatible = "renesas,sdhi-r8a7779"; + reg = <0xffe4f000 0x100>; + interrupt-parent = <&gic>; + interrupts = <0 106 IRQ_TYPE_LEVEL_HIGH>; + cap-sd-highspeed; + cap-sdio-irq; + status = "disabled"; + }; + + hspi0: spi@fffc7000 { + compatible = "renesas,hspi"; + reg = <0xfffc7000 0x18>; + interrupt-controller = <&gic>; + interrupts = <0 73 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + hspi1: spi@fffc8000 { + compatible = "renesas,hspi"; + reg = <0xfffc8000 0x18>; + interrupt-controller = <&gic>; + interrupts = <0 74 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; + }; + + hspi2: spi@fffc6000 { + compatible = "renesas,hspi"; + reg = <0xfffc6000 0x18>; + interrupt-controller = <&gic>; + interrupts = <0 75 IRQ_TYPE_LEVEL_HIGH>; + status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/r8a7790-lager-reference.dts b/arch/arm/boot/dts/r8a7790-lager-reference.dts deleted file mode 100644 index c462ef1..0000000 --- a/arch/arm/boot/dts/r8a7790-lager-reference.dts +++ /dev/null @@ -1,45 +0,0 @@ -/* - * Device Tree Source for the Lager board - * - * Copyright (C) 2013 Renesas Solutions Corp. - * - * This file is licensed under the terms of the GNU General Public License - * version 2. This program is licensed "as is" without any warranty of any - * kind, whether express or implied. - */ - -/dts-v1/; -/include/ "r8a7790.dtsi" -#include <dt-bindings/gpio/gpio.h> - -/ { - model = "Lager"; - compatible = "renesas,lager-reference", "renesas,r8a7790"; - - chosen { - bootargs = "console=ttySC6,115200 ignore_loglevel rw"; - }; - - memory@40000000 { - device_type = "memory"; - reg = <0 0x40000000 0 0x80000000>; - }; - - lbsc { - #address-cells = <1>; - #size-cells = <1>; - }; - - leds { - compatible = "gpio-leds"; - led6 { - gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>; - }; - led7 { - gpios = <&gpio4 23 GPIO_ACTIVE_HIGH>; - }; - led8 { - gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>; - }; - }; -}; diff --git a/arch/arm/boot/dts/r8a7790-lager.dts b/arch/arm/boot/dts/r8a7790-lager.dts index 203bd08..57569cb 100644 --- a/arch/arm/boot/dts/r8a7790-lager.dts +++ b/arch/arm/boot/dts/r8a7790-lager.dts @@ -9,7 +9,8 @@ */ /dts-v1/; -/include/ "r8a7790.dtsi" +#include "r8a7790.dtsi" +#include <dt-bindings/gpio/gpio.h> / { model = "Lager"; @@ -24,8 +25,69 @@ reg = <0 0x40000000 0 0x80000000>; }; + memory@180000000 { + device_type = "memory"; + reg = <1 0x80000000 0 0x80000000>; + }; + lbsc { #address-cells = <1>; #size-cells = <1>; }; + + leds { + compatible = "gpio-leds"; + led6 { + gpios = <&gpio4 22 GPIO_ACTIVE_HIGH>; + }; + led7 { + gpios = <&gpio4 23 GPIO_ACTIVE_HIGH>; + }; + led8 { + gpios = <&gpio5 17 GPIO_ACTIVE_HIGH>; + }; + }; + + fixedregulator3v3: fixedregulator@0 { + compatible = "regulator-fixed"; + regulator-name = "fixed-3.3V"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; +}; + +&extal_clk { + clock-frequency = <20000000>; +}; + +&pfc { + pinctrl-0 = <&scif0_pins &scif1_pins>; + pinctrl-names = "default"; + + scif0_pins: serial0 { + renesas,groups = "scif0_data"; + renesas,function = "scif0"; + }; + + scif1_pins: serial1 { + renesas,groups = "scif1_data"; + renesas,function = "scif1"; + }; + + mmc1_pins: mmc1 { + renesas,groups = "mmc1_data8", "mmc1_ctrl"; + renesas,function = "mmc1"; + }; +}; + +&mmcif1 { + pinctrl-0 = <&mmc1_pins>; + pinctrl-names = "default"; + + vmmc-supply = <&fixedregulator3v3>; + bus-width = <8>; + non-removable; + status = "okay"; }; diff --git a/arch/arm/boot/dts/r8a7790.dtsi b/arch/arm/boot/dts/r8a7790.dtsi index 9987dd0e..f48487c 100644 --- a/arch/arm/boot/dts/r8a7790.dtsi +++ b/arch/arm/boot/dts/r8a7790.dtsi @@ -8,6 +8,10 @@ * kind, whether express or implied. */ +#include <dt-bindings/clock/r8a7790-clock.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> + / { compatible = "renesas,r8a7790"; interrupt-parent = <&gic>; @@ -84,14 +88,14 @@ <0 0xf1002000 0 0x1000>, <0 0xf1004000 0 0x2000>, <0 0xf1006000 0 0x2000>; - interrupts = <1 9 0xf04>; + interrupts = <1 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; }; gpio0: gpio@e6050000 { compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar"; reg = <0 0xe6050000 0 0x50>; interrupt-parent = <&gic>; - interrupts = <0 4 0x4>; + interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 0 32>; @@ -103,7 +107,7 @@ compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar"; reg = <0 0xe6051000 0 0x50>; interrupt-parent = <&gic>; - interrupts = <0 5 0x4>; + interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 32 32>; @@ -115,7 +119,7 @@ compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar"; reg = <0 0xe6052000 0 0x50>; interrupt-parent = <&gic>; - interrupts = <0 6 0x4>; + interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 64 32>; @@ -127,7 +131,7 @@ compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar"; reg = <0 0xe6053000 0 0x50>; interrupt-parent = <&gic>; - interrupts = <0 7 0x4>; + interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 96 32>; @@ -139,7 +143,7 @@ compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar"; reg = <0 0xe6054000 0 0x50>; interrupt-parent = <&gic>; - interrupts = <0 8 0x4>; + interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 128 32>; @@ -151,7 +155,7 @@ compatible = "renesas,gpio-r8a7790", "renesas,gpio-rcar"; reg = <0 0xe6055000 0 0x50>; interrupt-parent = <&gic>; - interrupts = <0 9 0x4>; + interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>; #gpio-cells = <2>; gpio-controller; gpio-ranges = <&pfc 0 160 32>; @@ -159,21 +163,31 @@ interrupt-controller; }; + thermal@e61f0000 { + compatible = "renesas,thermal-r8a7790", "renesas,rcar-thermal"; + reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>; + interrupt-parent = <&gic>; + interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>; + }; + timer { compatible = "arm,armv7-timer"; - interrupts = <1 13 0xf08>, - <1 14 0xf08>, - <1 11 0xf08>, - <1 10 0xf08>; + interrupts = <1 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <1 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <1 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <1 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; }; irqc0: interrupt-controller@e61c0000 { - compatible = "renesas,irqc"; + compatible = "renesas,irqc-r8a7790", "renesas,irqc"; #interrupt-cells = <2>; interrupt-controller; reg = <0 0xe61c0000 0 0x200>; interrupt-parent = <&gic>; - interrupts = <0 0 4>, <0 1 4>, <0 2 4>, <0 3 4>; + interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>, + <0 1 IRQ_TYPE_LEVEL_HIGH>, + <0 2 IRQ_TYPE_LEVEL_HIGH>, + <0 3 IRQ_TYPE_LEVEL_HIGH>; }; i2c0: i2c@e6508000 { @@ -182,7 +196,8 @@ compatible = "renesas,i2c-r8a7790"; reg = <0 0xe6508000 0 0x40>; interrupt-parent = <&gic>; - interrupts = <0 287 0x4>; + interrupts = <0 287 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7790_CLK_I2C0>; status = "disabled"; }; @@ -192,7 +207,8 @@ compatible = "renesas,i2c-r8a7790"; reg = <0 0xe6518000 0 0x40>; interrupt-parent = <&gic>; - interrupts = <0 288 0x4>; + interrupts = <0 288 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7790_CLK_I2C1>; status = "disabled"; }; @@ -202,7 +218,8 @@ compatible = "renesas,i2c-r8a7790"; reg = <0 0xe6530000 0 0x40>; interrupt-parent = <&gic>; - interrupts = <0 286 0x4>; + interrupts = <0 286 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7790_CLK_I2C2>; status = "disabled"; }; @@ -212,24 +229,27 @@ compatible = "renesas,i2c-r8a7790"; reg = <0 0xe6540000 0 0x40>; interrupt-parent = <&gic>; - interrupts = <0 290 0x4>; + interrupts = <0 290 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7790_CLK_I2C3>; status = "disabled"; }; mmcif0: mmcif@ee200000 { - compatible = "renesas,sh-mmcif"; + compatible = "renesas,mmcif-r8a7790", "renesas,sh-mmcif"; reg = <0 0xee200000 0 0x80>; interrupt-parent = <&gic>; - interrupts = <0 169 0x4>; + interrupts = <0 169 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7790_CLK_MMCIF0>; reg-io-width = <4>; status = "disabled"; }; - mmcif1: mmcif@ee220000 { - compatible = "renesas,sh-mmcif"; + mmcif1: mmc@ee220000 { + compatible = "renesas,mmcif-r8a7790", "renesas,sh-mmcif"; reg = <0 0xee220000 0 0x80>; interrupt-parent = <&gic>; - interrupts = <0 170 0x4>; + interrupts = <0 170 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7790_CLK_MMCIF1>; reg-io-width = <4>; status = "disabled"; }; @@ -239,39 +259,372 @@ reg = <0 0xe6060000 0 0x250>; }; - sdhi0: sdhi@ee100000 { + sdhi0: sd@ee100000 { compatible = "renesas,sdhi-r8a7790"; reg = <0 0xee100000 0 0x200>; interrupt-parent = <&gic>; - interrupts = <0 165 4>; + interrupts = <0 165 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7790_CLK_SDHI0>; cap-sd-highspeed; status = "disabled"; }; - sdhi1: sdhi@ee120000 { + sdhi1: sd@ee120000 { compatible = "renesas,sdhi-r8a7790"; reg = <0 0xee120000 0 0x200>; interrupt-parent = <&gic>; - interrupts = <0 166 4>; + interrupts = <0 166 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7790_CLK_SDHI1>; cap-sd-highspeed; status = "disabled"; }; - sdhi2: sdhi@ee140000 { + sdhi2: sd@ee140000 { compatible = "renesas,sdhi-r8a7790"; reg = <0 0xee140000 0 0x100>; interrupt-parent = <&gic>; - interrupts = <0 167 4>; + interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7790_CLK_SDHI2>; cap-sd-highspeed; status = "disabled"; }; - sdhi3: sdhi@ee160000 { + sdhi3: sd@ee160000 { compatible = "renesas,sdhi-r8a7790"; reg = <0 0xee160000 0 0x100>; interrupt-parent = <&gic>; - interrupts = <0 168 4>; + interrupts = <0 168 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&mstp3_clks R8A7790_CLK_SDHI3>; cap-sd-highspeed; status = "disabled"; }; + + clocks { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* External root clock */ + extal_clk: extal_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overriden by the board. */ + clock-frequency = <0>; + clock-output-names = "extal"; + }; + + /* Special CPG clocks */ + cpg_clocks: cpg_clocks@e6150000 { + compatible = "renesas,r8a7790-cpg-clocks", + "renesas,rcar-gen2-cpg-clocks"; + reg = <0 0xe6150000 0 0x1000>; + clocks = <&extal_clk>; + #clock-cells = <1>; + clock-output-names = "main", "pll0", "pll1", "pll3", + "lb", "qspi", "sdh", "sd0", "sd1", + "z"; + }; + + /* Variable factor clocks */ + sd2_clk: sd2_clk@e6150078 { + compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock"; + reg = <0 0xe6150078 0 4>; + clocks = <&pll1_div2_clk>; + #clock-cells = <0>; + clock-output-names = "sd2"; + }; + sd3_clk: sd3_clk@e615007c { + compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock"; + reg = <0 0xe615007c 0 4>; + clocks = <&pll1_div2_clk>; + #clock-cells = <0>; + clock-output-names = "sd3"; + }; + mmc0_clk: mmc0_clk@e6150240 { + compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock"; + reg = <0 0xe6150240 0 4>; + clocks = <&pll1_div2_clk>; + #clock-cells = <0>; + clock-output-names = "mmc0"; + }; + mmc1_clk: mmc1_clk@e6150244 { + compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock"; + reg = <0 0xe6150244 0 4>; + clocks = <&pll1_div2_clk>; + #clock-cells = <0>; + clock-output-names = "mmc1"; + }; + ssp_clk: ssp_clk@e6150248 { + compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock"; + reg = <0 0xe6150248 0 4>; + clocks = <&pll1_div2_clk>; + #clock-cells = <0>; + clock-output-names = "ssp"; + }; + ssprs_clk: ssprs_clk@e615024c { + compatible = "renesas,r8a7790-div6-clock", "renesas,cpg-div6-clock"; + reg = <0 0xe615024c 0 4>; + clocks = <&pll1_div2_clk>; + #clock-cells = <0>; + clock-output-names = "ssprs"; + }; + + /* Fixed factor clocks */ + pll1_div2_clk: pll1_div2_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7790_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <2>; + clock-mult = <1>; + clock-output-names = "pll1_div2"; + }; + z2_clk: z2_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7790_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <2>; + clock-mult = <1>; + clock-output-names = "z2"; + }; + zg_clk: zg_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7790_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <3>; + clock-mult = <1>; + clock-output-names = "zg"; + }; + zx_clk: zx_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7790_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <3>; + clock-mult = <1>; + clock-output-names = "zx"; + }; + zs_clk: zs_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7790_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <6>; + clock-mult = <1>; + clock-output-names = "zs"; + }; + hp_clk: hp_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7790_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <12>; + clock-mult = <1>; + clock-output-names = "hp"; + }; + i_clk: i_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7790_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <2>; + clock-mult = <1>; + clock-output-names = "i"; + }; + b_clk: b_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7790_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <12>; + clock-mult = <1>; + clock-output-names = "b"; + }; + p_clk: p_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7790_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <24>; + clock-mult = <1>; + clock-output-names = "p"; + }; + cl_clk: cl_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7790_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <48>; + clock-mult = <1>; + clock-output-names = "cl"; + }; + m2_clk: m2_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7790_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <8>; + clock-mult = <1>; + clock-output-names = "m2"; + }; + imp_clk: imp_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7790_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <4>; + clock-mult = <1>; + clock-output-names = "imp"; + }; + rclk_clk: rclk_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7790_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <(48 * 1024)>; + clock-mult = <1>; + clock-output-names = "rclk"; + }; + oscclk_clk: oscclk_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7790_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <(12 * 1024)>; + clock-mult = <1>; + clock-output-names = "oscclk"; + }; + zb3_clk: zb3_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7790_CLK_PLL3>; + #clock-cells = <0>; + clock-div = <4>; + clock-mult = <1>; + clock-output-names = "zb3"; + }; + zb3d2_clk: zb3d2_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7790_CLK_PLL3>; + #clock-cells = <0>; + clock-div = <8>; + clock-mult = <1>; + clock-output-names = "zb3d2"; + }; + ddr_clk: ddr_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7790_CLK_PLL3>; + #clock-cells = <0>; + clock-div = <8>; + clock-mult = <1>; + clock-output-names = "ddr"; + }; + mp_clk: mp_clk { + compatible = "fixed-factor-clock"; + clocks = <&pll1_div2_clk>; + #clock-cells = <0>; + clock-div = <15>; + clock-mult = <1>; + clock-output-names = "mp"; + }; + cp_clk: cp_clk { + compatible = "fixed-factor-clock"; + clocks = <&extal_clk>; + #clock-cells = <0>; + clock-div = <2>; + clock-mult = <1>; + clock-output-names = "cp"; + }; + + /* Gate clocks */ + mstp0_clks: mstp0_clks@e6150130 { + compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe6150130 0 4>, <0 0xe6150030 0 4>; + clocks = <&mp_clk>; + #clock-cells = <1>; + renesas,clock-indices = <R8A7790_CLK_MSIOF0>; + clock-output-names = "msiof0"; + }; + mstp1_clks: mstp1_clks@e6150134 { + compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe6150134 0 4>, <0 0xe6150038 0 4>; + clocks = <&p_clk>, <&p_clk>, <&p_clk>, <&rclk_clk>, + <&cp_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>, + <&zs_clk>; + #clock-cells = <1>; + renesas,clock-indices = < + R8A7790_CLK_TMU1 R8A7790_CLK_TMU3 R8A7790_CLK_TMU2 + R8A7790_CLK_CMT0 R8A7790_CLK_TMU0 R8A7790_CLK_VSP1_DU1 + R8A7790_CLK_VSP1_DU0 R8A7790_CLK_VSP1_RT R8A7790_CLK_VSP1_SY + >; + clock-output-names = + "tmu1", "tmu3", "tmu2", "cmt0", "tmu0", "vsp1-du1", + "vsp1-du0", "vsp1-rt", "vsp1-sy"; + }; + mstp2_clks: mstp2_clks@e6150138 { + compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe6150138 0 4>, <0 0xe6150040 0 4>; + clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>, + <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>; + #clock-cells = <1>; + renesas,clock-indices = < + R8A7790_CLK_SCIFA2 R8A7790_CLK_SCIFA1 R8A7790_CLK_SCIFA0 + R8A7790_CLK_MSIOF2 R8A7790_CLK_SCIFB0 R8A7790_CLK_SCIFB1 + R8A7790_CLK_MSIOF1 R8A7790_CLK_MSIOF3 R8A7790_CLK_SCIFB2 + >; + clock-output-names = + "scifa2", "scifa1", "scifa0", "msiof2", "scifb0", + "scifb1", "msiof1", "msiof3", "scifb2"; + }; + mstp3_clks: mstp3_clks@e615013c { + compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>; + clocks = <&cp_clk>, <&mmc1_clk>, <&sd3_clk>, <&sd2_clk>, + <&cpg_clocks R8A7790_CLK_SD1>, <&cpg_clocks R8A7790_CLK_SD0>, + <&mmc0_clk>, <&rclk_clk>; + #clock-cells = <1>; + renesas,clock-indices = < + R8A7790_CLK_TPU0 R8A7790_CLK_MMCIF1 R8A7790_CLK_SDHI3 + R8A7790_CLK_SDHI2 R8A7790_CLK_SDHI1 R8A7790_CLK_SDHI0 + R8A7790_CLK_MMCIF0 R8A7790_CLK_CMT1 + >; + clock-output-names = + "tpu0", "mmcif1", "sdhi3", "sdhi2", + "sdhi1", "sdhi0", "mmcif0", "cmt1"; + }; + mstp5_clks: mstp5_clks@e6150144 { + compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe6150144 0 4>, <0 0xe615003c 0 4>; + clocks = <&extal_clk>, <&p_clk>; + #clock-cells = <1>; + renesas,clock-indices = <R8A7790_CLK_THERMAL R8A7790_CLK_PWM>; + clock-output-names = "thermal", "pwm"; + }; + mstp7_clks: mstp7_clks@e615014c { + compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe615014c 0 4>, <0 0xe61501c4 0 4>; + clocks = <&mp_clk>, <&mp_clk>, <&zs_clk>, <&zs_clk>, <&p_clk>, + <&p_clk>, <&zx_clk>, <&zx_clk>, <&zx_clk>, <&zx_clk>, + <&zx_clk>; + #clock-cells = <1>; + renesas,clock-indices = < + R8A7790_CLK_EHCI R8A7790_CLK_HSUSB R8A7790_CLK_HSCIF1 + R8A7790_CLK_HSCIF0 R8A7790_CLK_SCIF1 R8A7790_CLK_SCIF0 + R8A7790_CLK_DU2 R8A7790_CLK_DU1 R8A7790_CLK_DU0 + R8A7790_CLK_LVDS1 R8A7790_CLK_LVDS0 + >; + clock-output-names = + "ehci", "hsusb", "hscif1", "hscif0", "scif1", + "scif0", "du2", "du1", "du0", "lvds1", "lvds0"; + }; + mstp8_clks: mstp8_clks@e6150990 { + compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe6150990 0 4>, <0 0xe61509a0 0 4>; + clocks = <&p_clk>; + #clock-cells = <1>; + renesas,clock-indices = <R8A7790_CLK_ETHER>; + clock-output-names = "ether"; + }; + mstp9_clks: mstp9_clks@e6150994 { + compatible = "renesas,r8a7790-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe6150994 0 4>, <0 0xe61509a4 0 4>; + clocks = <&p_clk>, <&p_clk>, <&cpg_clocks R8A7790_CLK_QSPI>, + <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>; + #clock-cells = <1>; + renesas,clock-indices = < + R8A7790_CLK_RCAN1 R8A7790_CLK_RCAN0 R8A7790_CLK_QSPI_MOD + R8A7790_CLK_I2C3 R8A7790_CLK_I2C2 R8A7790_CLK_I2C1 + R8A7790_CLK_I2C0 + >; + clock-output-names = + "rcan1", "rcan0", "qspi_mod", "i2c3", "i2c2", "i2c1", "i2c0"; + }; + }; }; diff --git a/arch/arm/boot/dts/r8a7791-koelsch-reference.dts b/arch/arm/boot/dts/r8a7791-koelsch-reference.dts new file mode 100644 index 0000000..588ca17 --- /dev/null +++ b/arch/arm/boot/dts/r8a7791-koelsch-reference.dts @@ -0,0 +1,115 @@ +/* + * Device Tree Source for the Koelsch board + * + * Copyright (C) 2013 Renesas Electronics Corporation + * Copyright (C) 2013 Renesas Solutions Corp. + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +/dts-v1/; +#include "r8a7791.dtsi" +#include <dt-bindings/gpio/gpio.h> + +/ { + model = "Koelsch"; + compatible = "renesas,koelsch-reference", "renesas,r8a7791"; + + chosen { + bootargs = "console=ttySC6,115200 ignore_loglevel rw root=/dev/nfs ip=dhcp"; + }; + + memory@40000000 { + device_type = "memory"; + reg = <0 0x40000000 0 0x80000000>; + }; + + lbsc { + #address-cells = <1>; + #size-cells = <1>; + }; + + gpio-keys { + compatible = "gpio-keys"; + + key-a { + gpios = <&gpio7 0 GPIO_ACTIVE_LOW>; + linux,code = <30>; + label = "SW30"; + gpio-key,wakeup; + debounce-interval = <20>; + }; + key-b { + gpios = <&gpio7 1 GPIO_ACTIVE_LOW>; + linux,code = <48>; + label = "SW31"; + gpio-key,wakeup; + debounce-interval = <20>; + }; + key-c { + gpios = <&gpio7 2 GPIO_ACTIVE_LOW>; + linux,code = <46>; + label = "SW32"; + gpio-key,wakeup; + debounce-interval = <20>; + }; + key-d { + gpios = <&gpio7 3 GPIO_ACTIVE_LOW>; + linux,code = <32>; + label = "SW33"; + gpio-key,wakeup; + debounce-interval = <20>; + }; + key-e { + gpios = <&gpio7 4 GPIO_ACTIVE_LOW>; + linux,code = <18>; + label = "SW34"; + gpio-key,wakeup; + debounce-interval = <20>; + }; + key-f { + gpios = <&gpio7 5 GPIO_ACTIVE_LOW>; + linux,code = <33>; + label = "SW35"; + gpio-key,wakeup; + debounce-interval = <20>; + }; + key-g { + gpios = <&gpio7 6 GPIO_ACTIVE_LOW>; + linux,code = <34>; + label = "SW36"; + gpio-key,wakeup; + debounce-interval = <20>; + }; + }; + + leds { + compatible = "gpio-leds"; + led6 { + gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>; + }; + led7 { + gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>; + }; + led8 { + gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&pfc { + pinctrl-0 = <&scif0_pins &scif1_pins>; + pinctrl-names = "default"; + + scif0_pins: serial0 { + renesas,groups = "scif0_data_d"; + renesas,function = "scif0"; + }; + + scif1_pins: serial1 { + renesas,groups = "scif1_data_d"; + renesas,function = "scif1"; + }; +}; diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index 1ce5250..fd556c3 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -10,7 +10,8 @@ */ /dts-v1/; -/include/ "r8a7791.dtsi" +#include "r8a7791.dtsi" +#include <dt-bindings/gpio/gpio.h> / { model = "Koelsch"; @@ -29,4 +30,36 @@ #address-cells = <1>; #size-cells = <1>; }; + + leds { + compatible = "gpio-leds"; + led6 { + gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>; + }; + led7 { + gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>; + }; + led8 { + gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>; + }; + }; +}; + +&extal_clk { + clock-frequency = <20000000>; +}; + +&pfc { + pinctrl-0 = <&scif0_pins &scif1_pins>; + pinctrl-names = "default"; + + scif0_pins: serial0 { + renesas,groups = "scif0_data_d"; + renesas,function = "scif0"; + }; + + scif1_pins: serial1 { + renesas,groups = "scif1_data_d"; + renesas,function = "scif1"; + }; }; diff --git a/arch/arm/boot/dts/r8a7791.dtsi b/arch/arm/boot/dts/r8a7791.dtsi index fea5cfe..19c6550 100644 --- a/arch/arm/boot/dts/r8a7791.dtsi +++ b/arch/arm/boot/dts/r8a7791.dtsi @@ -9,6 +9,10 @@ * kind, whether express or implied. */ +#include <dt-bindings/clock/r8a7791-clock.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/interrupt-controller/irq.h> + / { compatible = "renesas,r8a7791"; interrupt-parent = <&gic>; @@ -43,32 +47,463 @@ <0 0xf1002000 0 0x1000>, <0 0xf1004000 0 0x2000>, <0 0xf1006000 0 0x2000>; - interrupts = <1 9 0xf04>; + interrupts = <1 9 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>; + }; + + gpio0: gpio@e6050000 { + compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar"; + reg = <0 0xe6050000 0 0x50>; + interrupt-parent = <&gic>; + interrupts = <0 4 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 0 32>; + #interrupt-cells = <2>; + interrupt-controller; + }; + + gpio1: gpio@e6051000 { + compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar"; + reg = <0 0xe6051000 0 0x50>; + interrupt-parent = <&gic>; + interrupts = <0 5 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 32 32>; + #interrupt-cells = <2>; + interrupt-controller; + }; + + gpio2: gpio@e6052000 { + compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar"; + reg = <0 0xe6052000 0 0x50>; + interrupt-parent = <&gic>; + interrupts = <0 6 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 64 32>; + #interrupt-cells = <2>; + interrupt-controller; + }; + + gpio3: gpio@e6053000 { + compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar"; + reg = <0 0xe6053000 0 0x50>; + interrupt-parent = <&gic>; + interrupts = <0 7 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 96 32>; + #interrupt-cells = <2>; + interrupt-controller; + }; + + gpio4: gpio@e6054000 { + compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar"; + reg = <0 0xe6054000 0 0x50>; + interrupt-parent = <&gic>; + interrupts = <0 8 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 128 32>; + #interrupt-cells = <2>; + interrupt-controller; + }; + + gpio5: gpio@e6055000 { + compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar"; + reg = <0 0xe6055000 0 0x50>; + interrupt-parent = <&gic>; + interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 160 32>; + #interrupt-cells = <2>; + interrupt-controller; + }; + + gpio6: gpio@e6055400 { + compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar"; + reg = <0 0xe6055400 0 0x50>; + interrupt-parent = <&gic>; + interrupts = <0 10 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 192 32>; + #interrupt-cells = <2>; + interrupt-controller; + }; + + gpio7: gpio@e6055800 { + compatible = "renesas,gpio-r8a7791", "renesas,gpio-rcar"; + reg = <0 0xe6055800 0 0x50>; + interrupt-parent = <&gic>; + interrupts = <0 11 IRQ_TYPE_LEVEL_HIGH>; + #gpio-cells = <2>; + gpio-controller; + gpio-ranges = <&pfc 0 224 26>; + #interrupt-cells = <2>; + interrupt-controller; + }; + + thermal@e61f0000 { + compatible = "renesas,thermal-r8a7791", "renesas,rcar-thermal"; + reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>; + interrupt-parent = <&gic>; + interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>; }; timer { compatible = "arm,armv7-timer"; - interrupts = <1 13 0xf08>, - <1 14 0xf08>, - <1 11 0xf08>, - <1 10 0xf08>; + interrupts = <1 13 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <1 14 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <1 11 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>, + <1 10 (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_LOW)>; }; irqc0: interrupt-controller@e61c0000 { - compatible = "renesas,irqc"; + compatible = "renesas,irqc-r8a7791", "renesas,irqc"; #interrupt-cells = <2>; interrupt-controller; reg = <0 0xe61c0000 0 0x200>; interrupt-parent = <&gic>; - interrupts = <0 0 4>, - <0 1 4>, - <0 2 4>, - <0 3 4>, - <0 12 4>, - <0 13 4>, - <0 14 4>, - <0 15 4>, - <0 16 4>, - <0 17 4>; + interrupts = <0 0 IRQ_TYPE_LEVEL_HIGH>, + <0 1 IRQ_TYPE_LEVEL_HIGH>, + <0 2 IRQ_TYPE_LEVEL_HIGH>, + <0 3 IRQ_TYPE_LEVEL_HIGH>, + <0 12 IRQ_TYPE_LEVEL_HIGH>, + <0 13 IRQ_TYPE_LEVEL_HIGH>, + <0 14 IRQ_TYPE_LEVEL_HIGH>, + <0 15 IRQ_TYPE_LEVEL_HIGH>, + <0 16 IRQ_TYPE_LEVEL_HIGH>, + <0 17 IRQ_TYPE_LEVEL_HIGH>; + }; + + pfc: pfc@e6060000 { + compatible = "renesas,pfc-r8a7791"; + reg = <0 0xe6060000 0 0x250>; + #gpio-range-cells = <3>; + }; + + clocks { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + /* External root clock */ + extal_clk: extal_clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + /* This value must be overriden by the board. */ + clock-frequency = <0>; + clock-output-names = "extal"; + }; + + /* Special CPG clocks */ + cpg_clocks: cpg_clocks@e6150000 { + compatible = "renesas,r8a7791-cpg-clocks", + "renesas,rcar-gen2-cpg-clocks"; + reg = <0 0xe6150000 0 0x1000>; + clocks = <&extal_clk>; + #clock-cells = <1>; + clock-output-names = "main", "pll0", "pll1", "pll3", + "lb", "qspi", "sdh", "sd0", "z"; + }; + + /* Variable factor clocks */ + sd1_clk: sd2_clk@e6150078 { + compatible = "renesas,r8a7791-div6-clock", "renesas,cpg-div6-clock"; + reg = <0 0xe6150078 0 4>; + clocks = <&pll1_div2_clk>; + #clock-cells = <0>; + clock-output-names = "sd1"; + }; + sd2_clk: sd3_clk@e615007c { + compatible = "renesas,r8a7791-div6-clock", "renesas,cpg-div6-clock"; + reg = <0 0xe615007c 0 4>; + clocks = <&pll1_div2_clk>; + #clock-cells = <0>; + clock-output-names = "sd2"; + }; + mmc0_clk: mmc0_clk@e6150240 { + compatible = "renesas,r8a7791-div6-clock", "renesas,cpg-div6-clock"; + reg = <0 0xe6150240 0 4>; + clocks = <&pll1_div2_clk>; + #clock-cells = <0>; + clock-output-names = "mmc0"; + }; + ssp_clk: ssp_clk@e6150248 { + compatible = "renesas,r8a7791-div6-clock", "renesas,cpg-div6-clock"; + reg = <0 0xe6150248 0 4>; + clocks = <&pll1_div2_clk>; + #clock-cells = <0>; + clock-output-names = "ssp"; + }; + ssprs_clk: ssprs_clk@e615024c { + compatible = "renesas,r8a7791-div6-clock", "renesas,cpg-div6-clock"; + reg = <0 0xe615024c 0 4>; + clocks = <&pll1_div2_clk>; + #clock-cells = <0>; + clock-output-names = "ssprs"; + }; + + /* Fixed factor clocks */ + pll1_div2_clk: pll1_div2_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7791_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <2>; + clock-mult = <1>; + clock-output-names = "pll1_div2"; + }; + zg_clk: zg_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7791_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <3>; + clock-mult = <1>; + clock-output-names = "zg"; + }; + zx_clk: zx_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7791_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <3>; + clock-mult = <1>; + clock-output-names = "zx"; + }; + zs_clk: zs_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7791_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <6>; + clock-mult = <1>; + clock-output-names = "zs"; + }; + hp_clk: hp_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7791_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <12>; + clock-mult = <1>; + clock-output-names = "hp"; + }; + i_clk: i_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7791_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <2>; + clock-mult = <1>; + clock-output-names = "i"; + }; + b_clk: b_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7791_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <12>; + clock-mult = <1>; + clock-output-names = "b"; + }; + p_clk: p_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7791_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <24>; + clock-mult = <1>; + clock-output-names = "p"; + }; + cl_clk: cl_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7791_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <48>; + clock-mult = <1>; + clock-output-names = "cl"; + }; + m2_clk: m2_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7791_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <8>; + clock-mult = <1>; + clock-output-names = "m2"; + }; + imp_clk: imp_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7791_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <4>; + clock-mult = <1>; + clock-output-names = "imp"; + }; + rclk_clk: rclk_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7791_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <(48 * 1024)>; + clock-mult = <1>; + clock-output-names = "rclk"; + }; + oscclk_clk: oscclk_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7791_CLK_PLL1>; + #clock-cells = <0>; + clock-div = <(12 * 1024)>; + clock-mult = <1>; + clock-output-names = "oscclk"; + }; + zb3_clk: zb3_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7791_CLK_PLL3>; + #clock-cells = <0>; + clock-div = <4>; + clock-mult = <1>; + clock-output-names = "zb3"; + }; + zb3d2_clk: zb3d2_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7791_CLK_PLL3>; + #clock-cells = <0>; + clock-div = <8>; + clock-mult = <1>; + clock-output-names = "zb3d2"; + }; + ddr_clk: ddr_clk { + compatible = "fixed-factor-clock"; + clocks = <&cpg_clocks R8A7791_CLK_PLL3>; + #clock-cells = <0>; + clock-div = <8>; + clock-mult = <1>; + clock-output-names = "ddr"; + }; + mp_clk: mp_clk { + compatible = "fixed-factor-clock"; + clocks = <&pll1_div2_clk>; + #clock-cells = <0>; + clock-div = <15>; + clock-mult = <1>; + clock-output-names = "mp"; + }; + cp_clk: cp_clk { + compatible = "fixed-factor-clock"; + clocks = <&extal_clk>; + #clock-cells = <0>; + clock-div = <2>; + clock-mult = <1>; + clock-output-names = "cp"; + }; + + /* Gate clocks */ + mstp0_clks: mstp0_clks@e6150130 { + compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe6150130 0 4>, <0 0xe6150030 0 4>; + clocks = <&mp_clk>; + #clock-cells = <1>; + renesas,clock-indices = <R8A7791_CLK_MSIOF0>; + clock-output-names = "msiof0"; + }; + mstp1_clks: mstp1_clks@e6150134 { + compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe6150134 0 4>, <0 0xe6150038 0 4>; + clocks = <&p_clk>, <&p_clk>, <&p_clk>, <&rclk_clk>, + <&cp_clk>, <&zs_clk>, <&zs_clk>, <&zs_clk>; + #clock-cells = <1>; + renesas,clock-indices = < + R8A7791_CLK_TMU1 R8A7791_CLK_TMU3 R8A7791_CLK_TMU2 + R8A7791_CLK_CMT0 R8A7791_CLK_TMU0 R8A7791_CLK_VSP1_DU1 + R8A7791_CLK_VSP1_DU0 R8A7791_CLK_VSP1_SY + >; + clock-output-names = + "tmu1", "tmu3", "tmu2", "cmt0", "tmu0", "vsp1-du1", + "vsp1-du0", "vsp1-sy"; + }; + mstp2_clks: mstp2_clks@e6150138 { + compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe6150138 0 4>, <0 0xe6150040 0 4>; + clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>, <&mp_clk>, + <&mp_clk>, <&mp_clk>, <&mp_clk>; + #clock-cells = <1>; + renesas,clock-indices = < + R8A7791_CLK_SCIFA2 R8A7791_CLK_SCIFA1 R8A7791_CLK_SCIFA0 + R8A7791_CLK_MSIOF2 R8A7791_CLK_SCIFB0 R8A7791_CLK_SCIFB1 + R8A7791_CLK_MSIOF1 R8A7791_CLK_SCIFB2 + >; + clock-output-names = + "scifa2", "scifa1", "scifa0", "misof2", "scifb0", + "scifb1", "msiof1", "scifb2"; + }; + mstp3_clks: mstp3_clks@e615013c { + compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe615013c 0 4>, <0 0xe6150048 0 4>; + clocks = <&cp_clk>, <&sd2_clk>, <&sd1_clk>, + <&cpg_clocks R8A7791_CLK_SD0>, <&mmc0_clk>, <&rclk_clk>; + #clock-cells = <1>; + renesas,clock-indices = < + R8A7791_CLK_TPU0 R8A7791_CLK_SDHI2 R8A7791_CLK_SDHI1 + R8A7791_CLK_SDHI0 R8A7791_CLK_MMCIF0 R8A7791_CLK_CMT1 + >; + clock-output-names = + "tpu0", "sdhi2", "sdhi1", "sdhi0", "mmcif0", "cmt1"; + }; + mstp5_clks: mstp5_clks@e6150144 { + compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe6150144 0 4>, <0 0xe615003c 0 4>; + clocks = <&extal_clk>, <&p_clk>; + #clock-cells = <1>; + renesas,clock-indices = <R8A7791_CLK_THERMAL R8A7791_CLK_PWM>; + clock-output-names = "thermal", "pwm"; + }; + mstp7_clks: mstp7_clks@e615014c { + compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe615014c 0 4>, <0 0xe61501c4 0 4>; + clocks = <&mp_clk>, <&zs_clk>, <&p_clk>, <&p_clk>, <&zs_clk>, + <&zs_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, + <&zx_clk>, <&zx_clk>, <&zx_clk>; + #clock-cells = <1>; + renesas,clock-indices = < + R8A7791_CLK_HSUSB R8A7791_CLK_HSCIF2 R8A7791_CLK_SCIF5 + R8A7791_CLK_SCIF4 R8A7791_CLK_HSCIF1 R8A7791_CLK_HSCIF0 + R8A7791_CLK_SCIF3 R8A7791_CLK_SCIF2 R8A7791_CLK_SCIF1 + R8A7791_CLK_SCIF0 R8A7791_CLK_DU1 R8A7791_CLK_DU0 + R8A7791_CLK_LVDS0 + >; + clock-output-names = + "hsusb", "hscif2", "scif5", "scif4", "hscif1", "hscif0", + "scif3", "scif2", "scif1", "scif0", "du1", "du0", "lvds0"; + }; + mstp8_clks: mstp8_clks@e6150990 { + compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe6150990 0 4>, <0 0xe61509a0 0 4>; + clocks = <&p_clk>; + #clock-cells = <1>; + renesas,clock-indices = <R8A7791_CLK_ETHER>; + clock-output-names = "ether"; + }; + mstp9_clks: mstp9_clks@e6150994 { + compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe6150994 0 4>, <0 0xe61509a4 0 4>; + clocks = <&p_clk>, <&p_clk>, <&cpg_clocks R8A7791_CLK_QSPI>, + <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, <&p_clk>, + <&p_clk>; + #clock-cells = <1>; + renesas,clock-indices = < + R8A7791_CLK_RCAN1 R8A7791_CLK_RCAN0 R8A7791_CLK_QSPI_MOD + R8A7791_CLK_I2C4 R8A7791_CLK_I2C4 R8A7791_CLK_I2C3 + R8A7791_CLK_I2C2 R8A7791_CLK_I2C1 R8A7791_CLK_I2C0 + >; + clock-output-names = + "rcan1", "rcan0", "qspi_mod", "i2c5", "i2c4", "i2c3", + "i2c2", "i2c1", "i2c0"; + }; + mstp11_clks: mstp11_clks@e615099c { + compatible = "renesas,r8a7791-mstp-clocks", "renesas,cpg-mstp-clocks"; + reg = <0 0xe615099c 0 4>, <0 0xe61509ac 0 4>; + clocks = <&mp_clk>, <&mp_clk>, <&mp_clk>; + #clock-cells = <1>; + renesas,clock-indices = < + R8A7791_CLK_SCIFA3 R8A7791_CLK_SCIFA4 R8A7791_CLK_SCIFA5 + >; + clock-output-names = "scifa3", "scifa4", "scifa5"; + }; }; }; diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi index de9fece..1105558 100644 --- a/arch/arm/boot/dts/sama5d3.dtsi +++ b/arch/arm/boot/dts/sama5d3.dtsi @@ -1,6 +1,6 @@ /* * sama5d3.dtsi - Device Tree Include file for SAMA5D3 family SoC - * applies to SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35 SoC + * applies to SAMA5D31, SAMA5D33, SAMA5D34, SAMA5D35, SAMA5D36 SoC * * Copyright (C) 2013 Atmel, * 2013 Ludovic Desroches <ludovic.desroches@atmel.com> @@ -37,6 +37,7 @@ i2c2 = &i2c2; ssc0 = &ssc0; ssc1 = &ssc1; + pwm0 = &pwm0; }; cpus { #address-cells = <1>; @@ -179,6 +180,15 @@ status = "disabled"; }; + pwm0: pwm@f002c000 { + compatible = "atmel,sama5d3-pwm"; + reg = <0xf002c000 0x300>; + interrupts = <28 IRQ_TYPE_LEVEL_HIGH 4>; + #pwm-cells = <3>; + clocks = <&pwm_clk>; + status = "disabled"; + }; + isi: isi@f0034000 { compatible = "atmel,at91sam9g45-isi"; reg = <0xf0034000 0x4000>; @@ -304,6 +314,8 @@ dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(11)>, <&dma1 2 AT91_DMA_CFG_PER_ID(12)>; dma-names = "tx", "rx"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c2>; #address-cells = <1>; #size-cells = <0>; clocks = <&twi2_clk>; @@ -333,21 +345,35 @@ }; sha@f8034000 { - compatible = "atmel,sam9g46-sha"; + compatible = "atmel,at91sam9g46-sha"; reg = <0xf8034000 0x100>; interrupts = <42 IRQ_TYPE_LEVEL_HIGH 0>; + dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(17)>; + dma-names = "tx"; + clocks = <&sha_clk>; + clock-names = "sha_clk"; }; aes@f8038000 { - compatible = "atmel,sam9g46-aes"; + compatible = "atmel,at91sam9g46-aes"; reg = <0xf8038000 0x100>; - interrupts = <43 4 0>; + interrupts = <43 IRQ_TYPE_LEVEL_HIGH 0>; + dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(18)>, + <&dma1 2 AT91_DMA_CFG_PER_ID(19)>; + dma-names = "tx", "rx"; + clocks = <&aes_clk>; + clock-names = "aes_clk"; }; tdes@f803c000 { - compatible = "atmel,sam9g46-tdes"; + compatible = "atmel,at91sam9g46-tdes"; reg = <0xf803c000 0x100>; interrupts = <44 IRQ_TYPE_LEVEL_HIGH 0>; + dmas = <&dma1 2 AT91_DMA_CFG_PER_ID(20)>, + <&dma1 2 AT91_DMA_CFG_PER_ID(21)>; + dma-names = "tx", "rx"; + clocks = <&tdes_clk>; + clock-names = "tdes_clk"; }; dma0: dma-controller@ffffe600 { @@ -486,6 +512,14 @@ }; }; + i2c2 { + pinctrl_i2c2: i2c2-0 { + atmel,pins = + <AT91_PIOA 18 AT91_PERIPH_B AT91_PINCTRL_NONE /* TWD2 pin, conflicts with LCDDAT18, ISI_D2 */ + AT91_PIOA 19 AT91_PERIPH_B AT91_PINCTRL_NONE>; /* TWCK2 pin, conflicts with LCDDAT19, ISI_D3 */ + }; + }; + isi { pinctrl_isi: isi-0 { atmel,pins = diff --git a/arch/arm/boot/dts/sama5d36.dtsi b/arch/arm/boot/dts/sama5d36.dtsi new file mode 100644 index 0000000..6c31c26 --- /dev/null +++ b/arch/arm/boot/dts/sama5d36.dtsi @@ -0,0 +1,20 @@ +/* + * sama5d36.dtsi - Device Tree Include file for SAMA5D36 SoC + * + * Copyright (C) 2013 Atmel, + * 2013 Josh Wu <josh.wu@atmel.com> + * + * Licensed under GPLv2 or later. + */ +#include "sama5d3.dtsi" +#include "sama5d3_can.dtsi" +#include "sama5d3_emac.dtsi" +#include "sama5d3_gmac.dtsi" +#include "sama5d3_lcd.dtsi" +#include "sama5d3_mci2.dtsi" +#include "sama5d3_tcb1.dtsi" +#include "sama5d3_uart.dtsi" + +/ { + compatible = "atmel,samad36", "atmel,sama5d3", "atmel,sama5"; +}; diff --git a/arch/arm/boot/dts/sama5d36ek.dts b/arch/arm/boot/dts/sama5d36ek.dts new file mode 100644 index 0000000..59576c6 --- /dev/null +++ b/arch/arm/boot/dts/sama5d36ek.dts @@ -0,0 +1,53 @@ +/* + * sama5d36ek.dts - Device Tree file for SAMA5D36-EK board + * + * Copyright (C) 2013 Atmel, + * 2013 Josh Wu <josh.wu@atmel.com> + * + * Licensed under GPLv2 or later. + */ +/dts-v1/; +#include "sama5d36.dtsi" +#include "sama5d3xmb.dtsi" +#include "sama5d3xdm.dtsi" + +/ { + model = "Atmel SAMA5D36-EK"; + compatible = "atmel,sama5d36ek", "atmel,sama5d3xmb", "atmel,sama5d3xcm", "atmel,sama5d36", "atmel,sama5d3", "atmel,sama5"; + + ahb { + apb { + spi0: spi@f0004000 { + status = "okay"; + }; + + ssc0: ssc@f0008000 { + status = "okay"; + }; + + can0: can@f000c000 { + status = "okay"; + }; + + i2c0: i2c@f0014000 { + status = "okay"; + }; + + i2c1: i2c@f0018000 { + status = "okay"; + }; + + macb0: ethernet@f0028000 { + status = "okay"; + }; + + macb1: ethernet@f802c000 { + status = "okay"; + }; + }; + }; + + sound { + status = "okay"; + }; +}; diff --git a/arch/arm/boot/dts/sama5d3_uart.dtsi b/arch/arm/boot/dts/sama5d3_uart.dtsi index 49d4d76..a9fa75e 100644 --- a/arch/arm/boot/dts/sama5d3_uart.dtsi +++ b/arch/arm/boot/dts/sama5d3_uart.dtsi @@ -12,6 +12,11 @@ #include <dt-bindings/clk/at91.h> / { + aliases { + serial5 = &uart0; + serial6 = &uart1; + }; + ahb { apb { pinctrl@fffff200 { diff --git a/arch/arm/boot/dts/sama5d3xdm.dtsi b/arch/arm/boot/dts/sama5d3xdm.dtsi index 1c296d6..f9bdde5 100644 --- a/arch/arm/boot/dts/sama5d3xdm.dtsi +++ b/arch/arm/boot/dts/sama5d3xdm.dtsi @@ -18,6 +18,7 @@ interrupts = <31 0x0>; pinctrl-names = "default"; pinctrl-0 = <&pinctrl_qt1070_irq>; + wakeup-source; }; }; diff --git a/arch/arm/boot/dts/sh7372-mackerel.dts b/arch/arm/boot/dts/sh7372-mackerel.dts index 8acf51e..a759a27 100644 --- a/arch/arm/boot/dts/sh7372-mackerel.dts +++ b/arch/arm/boot/dts/sh7372-mackerel.dts @@ -9,7 +9,7 @@ */ /dts-v1/; -/include/ "sh7372.dtsi" +#include "sh7372.dtsi" / { model = "Mackerel (AP4 EVM 2nd)"; diff --git a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts index 8ee06dd..eb8886b 100644 --- a/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts +++ b/arch/arm/boot/dts/sh73a0-kzm9g-reference.dts @@ -12,8 +12,9 @@ */ /dts-v1/; -/include/ "sh73a0.dtsi" +#include "sh73a0.dtsi" #include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/interrupt-controller/irq.h> / { model = "KZM-A9-GT"; @@ -82,7 +83,7 @@ reg = <0x10000000 0x100>; phy-mode = "mii"; interrupt-parent = <&irqpin0>; - interrupts = <3 0>; /* active low */ + interrupts = <3 IRQ_TYPE_EDGE_FALLING>; reg-io-width = <4>; smsc,irq-push-pull; smsc,save-mac-address; @@ -105,6 +106,66 @@ gpios = <&pfc 23 GPIO_ACTIVE_LOW>; }; }; + + gpio-keys { + compatible = "gpio-keys"; + + back-key { + gpios = <&pcf8575 8 GPIO_ACTIVE_LOW>; + linux,code = <158>; + label = "SW3"; + }; + + right-key { + gpios = <&pcf8575 9 GPIO_ACTIVE_LOW>; + linux,code = <106>; + label = "SW2-R"; + }; + + left-key { + gpios = <&pcf8575 10 GPIO_ACTIVE_LOW>; + linux,code = <105>; + label = "SW2-L"; + }; + + enter-key { + gpios = <&pcf8575 11 GPIO_ACTIVE_LOW>; + linux,code = <28>; + label = "SW2-P"; + }; + + up-key { + gpios = <&pcf8575 12 GPIO_ACTIVE_LOW>; + linux,code = <103>; + label = "SW2-U"; + }; + + down-key { + gpios = <&pcf8575 13 GPIO_ACTIVE_LOW>; + linux,code = <108>; + label = "SW2-D"; + }; + + home-key { + gpios = <&pcf8575 14 GPIO_ACTIVE_LOW>; + linux,code = <102>; + label = "SW1"; + }; + }; + + sound { + compatible = "simple-audio-card"; + simple-audio-card,format = "left_j"; + simple-audio-card,cpu { + sound-dai = <&sh_fsi2 0>; + }; + simple-audio-card,codec { + sound-dai = <&ak4648>; + bitclock-master; + frame-master; + system-clock-frequency = <11289600>; + }; + }; }; &i2c0 { @@ -179,12 +240,29 @@ }; }; }; + + ak4648: ak4648@0x12 { + #sound-dai-cells = <0>; + compatible = "asahi-kasei,ak4648"; + reg = <0x12>; + }; }; &i2c3 { pinctrl-0 = <&i2c3_pins>; pinctrl-names = "default"; status = "okay"; + + pcf8575: gpio@20 { + compatible = "nxp,pcf8575"; + reg = <0x20>; + interrupt-parent = <&irqpin2>; + interrupts = <3 IRQ_TYPE_EDGE_FALLING>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + }; }; &mmcif { @@ -205,7 +283,7 @@ renesas,function = "i2c3"; }; - mmcif_pins: mmcif { + mmcif_pins: mmc { mux { renesas,groups = "mmc0_data8_0", "mmc0_ctrl_0"; renesas,function = "mmc0"; @@ -217,20 +295,26 @@ }; }; - scifa4_pins: scifa4 { + scifa4_pins: serial4 { renesas,groups = "scifa4_data", "scifa4_ctrl"; renesas,function = "scifa4"; }; - sdhi0_pins: sdhi0 { + sdhi0_pins: sd0 { renesas,groups = "sdhi0_data4", "sdhi0_ctrl", "sdhi0_cd", "sdhi0_wp"; renesas,function = "sdhi0"; }; - sdhi2_pins: sdhi2 { + sdhi2_pins: sd2 { renesas,groups = "sdhi2_data4", "sdhi2_ctrl"; renesas,function = "sdhi2"; }; + + fsia_pins: sounda { + renesas,groups = "fsia_mclk_in", "fsia_sclk_in", + "fsia_data_in", "fsia_data_out"; + renesas,function = "fsia"; + }; }; &sdhi0 { @@ -251,3 +335,10 @@ broken-cd; status = "okay"; }; + +&sh_fsi2 { + pinctrl-0 = <&fsia_pins>; + pinctrl-names = "default"; + + status = "okay"; +}; diff --git a/arch/arm/boot/dts/sh73a0-kzm9g.dts b/arch/arm/boot/dts/sh73a0-kzm9g.dts index 0f1ca77..27c5f42 100644 --- a/arch/arm/boot/dts/sh73a0-kzm9g.dts +++ b/arch/arm/boot/dts/sh73a0-kzm9g.dts @@ -9,7 +9,7 @@ */ /dts-v1/; -/include/ "sh73a0.dtsi" +#include "sh73a0.dtsi" / { model = "KZM-A9-GT"; diff --git a/arch/arm/boot/dts/sh73a0.dtsi b/arch/arm/boot/dts/sh73a0.dtsi index fcf2688..b7bd3b9 100644 --- a/arch/arm/boot/dts/sh73a0.dtsi +++ b/arch/arm/boot/dts/sh73a0.dtsi @@ -10,6 +10,8 @@ /include/ "skeleton.dtsi" +#include <dt-bindings/interrupt-controller/irq.h> + / { compatible = "renesas,sh73a0"; @@ -40,12 +42,12 @@ pmu { compatible = "arm,cortex-a9-pmu"; - interrupts = <0 55 4>, - <0 56 4>; + interrupts = <0 55 IRQ_TYPE_LEVEL_HIGH>, + <0 56 IRQ_TYPE_LEVEL_HIGH>; }; irqpin0: irqpin@e6900000 { - compatible = "renesas,intc-irqpin"; + compatible = "renesas,intc-irqpin-sh73a0", "renesas,intc-irqpin"; #interrupt-cells = <2>; interrupt-controller; reg = <0xe6900000 4>, @@ -54,18 +56,18 @@ <0xe6900040 1>, <0xe6900060 1>; interrupt-parent = <&gic>; - interrupts = <0 1 0x4 - 0 2 0x4 - 0 3 0x4 - 0 4 0x4 - 0 5 0x4 - 0 6 0x4 - 0 7 0x4 - 0 8 0x4>; + interrupts = <0 1 IRQ_TYPE_LEVEL_HIGH + 0 2 IRQ_TYPE_LEVEL_HIGH + 0 3 IRQ_TYPE_LEVEL_HIGH + 0 4 IRQ_TYPE_LEVEL_HIGH + 0 5 IRQ_TYPE_LEVEL_HIGH + 0 6 IRQ_TYPE_LEVEL_HIGH + 0 7 IRQ_TYPE_LEVEL_HIGH + 0 8 IRQ_TYPE_LEVEL_HIGH>; }; irqpin1: irqpin@e6900004 { - compatible = "renesas,intc-irqpin"; + compatible = "renesas,intc-irqpin-sh73a0", "renesas,intc-irqpin"; #interrupt-cells = <2>; interrupt-controller; reg = <0xe6900004 4>, @@ -74,19 +76,19 @@ <0xe6900044 1>, <0xe6900064 1>; interrupt-parent = <&gic>; - interrupts = <0 9 0x4 - 0 10 0x4 - 0 11 0x4 - 0 12 0x4 - 0 13 0x4 - 0 14 0x4 - 0 15 0x4 - 0 16 0x4>; + interrupts = <0 9 IRQ_TYPE_LEVEL_HIGH + 0 10 IRQ_TYPE_LEVEL_HIGH + 0 11 IRQ_TYPE_LEVEL_HIGH + 0 12 IRQ_TYPE_LEVEL_HIGH + 0 13 IRQ_TYPE_LEVEL_HIGH + 0 14 IRQ_TYPE_LEVEL_HIGH + 0 15 IRQ_TYPE_LEVEL_HIGH + 0 16 IRQ_TYPE_LEVEL_HIGH>; control-parent; }; irqpin2: irqpin@e6900008 { - compatible = "renesas,intc-irqpin"; + compatible = "renesas,intc-irqpin-sh73a0", "renesas,intc-irqpin"; #interrupt-cells = <2>; interrupt-controller; reg = <0xe6900008 4>, @@ -95,18 +97,18 @@ <0xe6900048 1>, <0xe6900068 1>; interrupt-parent = <&gic>; - interrupts = <0 17 0x4 - 0 18 0x4 - 0 19 0x4 - 0 20 0x4 - 0 21 0x4 - 0 22 0x4 - 0 23 0x4 - 0 24 0x4>; + interrupts = <0 17 IRQ_TYPE_LEVEL_HIGH + 0 18 IRQ_TYPE_LEVEL_HIGH + 0 19 IRQ_TYPE_LEVEL_HIGH + 0 20 IRQ_TYPE_LEVEL_HIGH + 0 21 IRQ_TYPE_LEVEL_HIGH + 0 22 IRQ_TYPE_LEVEL_HIGH + 0 23 IRQ_TYPE_LEVEL_HIGH + 0 24 IRQ_TYPE_LEVEL_HIGH>; }; irqpin3: irqpin@e690000c { - compatible = "renesas,intc-irqpin"; + compatible = "renesas,intc-irqpin-sh73a0", "renesas,intc-irqpin"; #interrupt-cells = <2>; interrupt-controller; reg = <0xe690000c 4>, @@ -115,14 +117,14 @@ <0xe690004c 1>, <0xe690006c 1>; interrupt-parent = <&gic>; - interrupts = <0 25 0x4 - 0 26 0x4 - 0 27 0x4 - 0 28 0x4 - 0 29 0x4 - 0 30 0x4 - 0 31 0x4 - 0 32 0x4>; + interrupts = <0 25 IRQ_TYPE_LEVEL_HIGH + 0 26 IRQ_TYPE_LEVEL_HIGH + 0 27 IRQ_TYPE_LEVEL_HIGH + 0 28 IRQ_TYPE_LEVEL_HIGH + 0 29 IRQ_TYPE_LEVEL_HIGH + 0 30 IRQ_TYPE_LEVEL_HIGH + 0 31 IRQ_TYPE_LEVEL_HIGH + 0 32 IRQ_TYPE_LEVEL_HIGH>; }; i2c0: i2c@e6820000 { @@ -131,10 +133,10 @@ compatible = "renesas,rmobile-iic"; reg = <0xe6820000 0x425>; interrupt-parent = <&gic>; - interrupts = <0 167 0x4 - 0 168 0x4 - 0 169 0x4 - 0 170 0x4>; + interrupts = <0 167 IRQ_TYPE_LEVEL_HIGH + 0 168 IRQ_TYPE_LEVEL_HIGH + 0 169 IRQ_TYPE_LEVEL_HIGH + 0 170 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -144,10 +146,10 @@ compatible = "renesas,rmobile-iic"; reg = <0xe6822000 0x425>; interrupt-parent = <&gic>; - interrupts = <0 51 0x4 - 0 52 0x4 - 0 53 0x4 - 0 54 0x4>; + interrupts = <0 51 IRQ_TYPE_LEVEL_HIGH + 0 52 IRQ_TYPE_LEVEL_HIGH + 0 53 IRQ_TYPE_LEVEL_HIGH + 0 54 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -157,10 +159,10 @@ compatible = "renesas,rmobile-iic"; reg = <0xe6824000 0x425>; interrupt-parent = <&gic>; - interrupts = <0 171 0x4 - 0 172 0x4 - 0 173 0x4 - 0 174 0x4>; + interrupts = <0 171 IRQ_TYPE_LEVEL_HIGH + 0 172 IRQ_TYPE_LEVEL_HIGH + 0 173 IRQ_TYPE_LEVEL_HIGH + 0 174 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -170,10 +172,10 @@ compatible = "renesas,rmobile-iic"; reg = <0xe6826000 0x425>; interrupt-parent = <&gic>; - interrupts = <0 183 0x4 - 0 184 0x4 - 0 185 0x4 - 0 186 0x4>; + interrupts = <0 183 IRQ_TYPE_LEVEL_HIGH + 0 184 IRQ_TYPE_LEVEL_HIGH + 0 185 IRQ_TYPE_LEVEL_HIGH + 0 186 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; @@ -183,52 +185,52 @@ compatible = "renesas,rmobile-iic"; reg = <0xe6828000 0x425>; interrupt-parent = <&gic>; - interrupts = <0 187 0x4 - 0 188 0x4 - 0 189 0x4 - 0 190 0x4>; + interrupts = <0 187 IRQ_TYPE_LEVEL_HIGH + 0 188 IRQ_TYPE_LEVEL_HIGH + 0 189 IRQ_TYPE_LEVEL_HIGH + 0 190 IRQ_TYPE_LEVEL_HIGH>; status = "disabled"; }; - mmcif: mmcif@e6bd0000 { + mmcif: mmc@e6bd0000 { compatible = "renesas,sh-mmcif"; reg = <0xe6bd0000 0x100>; interrupt-parent = <&gic>; - interrupts = <0 140 0x4 - 0 141 0x4>; + interrupts = <0 140 IRQ_TYPE_LEVEL_HIGH + 0 141 IRQ_TYPE_LEVEL_HIGH>; reg-io-width = <4>; status = "disabled"; }; - sdhi0: sdhi@ee100000 { - compatible = "renesas,sdhi-r8a7740"; + sdhi0: sd@ee100000 { + compatible = "renesas,sdhi-sh73a0"; reg = <0xee100000 0x100>; interrupt-parent = <&gic>; - interrupts = <0 83 4 - 0 84 4 - 0 85 4>; + interrupts = <0 83 IRQ_TYPE_LEVEL_HIGH + 0 84 IRQ_TYPE_LEVEL_HIGH + 0 85 IRQ_TYPE_LEVEL_HIGH>; cap-sd-highspeed; status = "disabled"; }; /* SDHI1 and SDHI2 have no CD pins, no need for CD IRQ */ - sdhi1: sdhi@ee120000 { - compatible = "renesas,sdhi-r8a7740"; + sdhi1: sd@ee120000 { + compatible = "renesas,sdhi-sh73a0"; reg = <0xee120000 0x100>; interrupt-parent = <&gic>; - interrupts = <0 88 4 - 0 89 4>; + interrupts = <0 88 IRQ_TYPE_LEVEL_HIGH + 0 89 IRQ_TYPE_LEVEL_HIGH>; toshiba,mmc-wrprotect-disable; cap-sd-highspeed; status = "disabled"; }; - sdhi2: sdhi@ee140000 { - compatible = "renesas,sdhi-r8a7740"; + sdhi2: sd@ee140000 { + compatible = "renesas,sdhi-sh73a0"; reg = <0xee140000 0x100>; interrupt-parent = <&gic>; - interrupts = <0 104 4 - 0 105 4>; + interrupts = <0 104 IRQ_TYPE_LEVEL_HIGH + 0 105 IRQ_TYPE_LEVEL_HIGH>; toshiba,mmc-wrprotect-disable; cap-sd-highspeed; status = "disabled"; @@ -240,5 +242,23 @@ <0xe605801c 0x1c>; gpio-controller; #gpio-cells = <2>; + interrupts-extended = + <&irqpin0 0 0>, <&irqpin0 1 0>, <&irqpin0 2 0>, <&irqpin0 3 0>, + <&irqpin0 4 0>, <&irqpin0 5 0>, <&irqpin0 6 0>, <&irqpin0 7 0>, + <&irqpin1 0 0>, <&irqpin1 1 0>, <&irqpin1 2 0>, <&irqpin1 3 0>, + <&irqpin1 4 0>, <&irqpin1 5 0>, <&irqpin1 6 0>, <&irqpin1 7 0>, + <&irqpin2 0 0>, <&irqpin2 1 0>, <&irqpin2 2 0>, <&irqpin2 3 0>, + <&irqpin2 4 0>, <&irqpin2 5 0>, <&irqpin2 6 0>, <&irqpin2 7 0>, + <&irqpin3 0 0>, <&irqpin3 1 0>, <&irqpin3 2 0>, <&irqpin3 3 0>, + <&irqpin3 4 0>, <&irqpin3 5 0>, <&irqpin3 6 0>, <&irqpin3 7 0>; + }; + + sh_fsi2: sound@ec230000 { + #sound-dai-cells = <1>; + compatible = "renesas,sh_fsi2"; + reg = <0xec230000 0x400>; + interrupt-parent = <&gic>; + interrupts = <0 146 0x4>; + status = "disabled"; }; }; diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi index f936476..537f1a5 100644 --- a/arch/arm/boot/dts/socfpga.dtsi +++ b/arch/arm/boot/dts/socfpga.dtsi @@ -79,6 +79,8 @@ #dma-cells = <1>; #dma-channels = <8>; #dma-requests = <32>; + clocks = <&l4_main_clk>; + clock-names = "apb_pclk"; }; }; @@ -467,6 +469,8 @@ interrupts = <0 38 0x04>; cache-unified; cache-level = <2>; + arm,tag-latency = <1 1 1>; + arm,data-latency = <2 1 1>; }; /* Local timer */ diff --git a/arch/arm/boot/dts/st-pincfg.h b/arch/arm/boot/dts/st-pincfg.h index 8c45d85..4851c38 100644 --- a/arch/arm/boot/dts/st-pincfg.h +++ b/arch/arm/boot/dts/st-pincfg.h @@ -15,7 +15,7 @@ /* Pull Up */ #define PU (1 << 26) /* Open Drain */ -#define OD (1 << 26) +#define OD (1 << 25) #define RT (1 << 23) #define INVERTCLK (1 << 22) #define CLKNOTDATA (1 << 21) diff --git a/arch/arm/boot/dts/ste-dbx5x0.dtsi b/arch/arm/boot/dts/ste-dbx5x0.dtsi index 7da99fe..e0853ea 100644 --- a/arch/arm/boot/dts/ste-dbx5x0.dtsi +++ b/arch/arm/boot/dts/ste-dbx5x0.dtsi @@ -913,6 +913,10 @@ interrupts = <0 31 IRQ_TYPE_LEVEL_HIGH>; v-ape-supply = <&db8500_vape_reg>; + dmas = <&dma 31 0 0x12>, /* Logical - DevToMem - HighPrio */ + <&dma 31 0 0x10>; /* Logical - MemToDev - HighPrio */ + dma-names = "rx", "tx"; + clocks = <&prcc_kclk 1 3>, <&prcc_pclk 1 3>; clock-names = "msp", "apb_pclk"; @@ -925,6 +929,9 @@ interrupts = <0 62 IRQ_TYPE_LEVEL_HIGH>; v-ape-supply = <&db8500_vape_reg>; + dmas = <&dma 30 0 0x10>; /* Logical - MemToDev - HighPrio */ + dma-names = "tx"; + clocks = <&prcc_kclk 1 4>, <&prcc_pclk 1 4>; clock-names = "msp", "apb_pclk"; @@ -938,6 +945,11 @@ interrupts = <0 98 IRQ_TYPE_LEVEL_HIGH>; v-ape-supply = <&db8500_vape_reg>; + dmas = <&dma 14 0 0x12>, /* Logical - DevToMem - HighPrio */ + <&dma 14 1 0x19>; /* Physical Chan 1 - MemToDev + HighPrio - Fixed */ + dma-names = "rx", "tx"; + clocks = <&prcc_kclk 2 3>, <&prcc_pclk 2 5>; clock-names = "msp", "apb_pclk"; @@ -950,6 +962,9 @@ interrupts = <0 62 IRQ_TYPE_LEVEL_HIGH>; v-ape-supply = <&db8500_vape_reg>; + dmas = <&dma 30 0 0x12>; /* Logical - DevToMem - HighPrio */ + dma-names = "rx"; + clocks = <&prcc_kclk 1 10>, <&prcc_pclk 1 11>; clock-names = "msp", "apb_pclk"; @@ -987,6 +1002,23 @@ status = "disabled"; }; + mcde@a0350000 { + compatible = "stericsson,mcde"; + reg = <0xa0350000 0x1000>, /* MCDE */ + <0xa0351000 0x1000>, /* DSI link 1 */ + <0xa0352000 0x1000>, /* DSI link 2 */ + <0xa0353000 0x1000>; /* DSI link 3 */ + interrupts = <0 48 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&prcmu_clk PRCMU_MCDECLK>, /* Main MCDE clock */ + <&prcmu_clk PRCMU_LCDCLK>, /* LCD clock */ + <&prcmu_clk PRCMU_PLLDSI>, /* HDMI clock */ + <&prcmu_clk PRCMU_DSI0CLK>, /* DSI 0 */ + <&prcmu_clk PRCMU_DSI1CLK>, /* DSI 1 */ + <&prcmu_clk PRCMU_DSI0ESCCLK>, /* TVout clock 0 */ + <&prcmu_clk PRCMU_DSI1ESCCLK>, /* TVout clock 1 */ + <&prcmu_clk PRCMU_DSI2ESCCLK>; /* TVout clock 2 */ + }; + cryp@a03cb000 { compatible = "stericsson,ux500-cryp"; reg = <0xa03cb000 0x1000>; diff --git a/arch/arm/boot/dts/ste-href-family-pinctrl.dtsi b/arch/arm/boot/dts/ste-href-family-pinctrl.dtsi new file mode 100644 index 0000000..addfcc7 --- /dev/null +++ b/arch/arm/boot/dts/ste-href-family-pinctrl.dtsi @@ -0,0 +1,745 @@ +/* + * Copyright 2013 Linaro Ltd. + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +#include "ste-nomadik-pinctrl.dtsi" + +/ { + soc { + pinctrl { + /* Settings for all UART default and sleep states */ + uart0 { + uart0_default_mode: uart0_default { + default_mux { + ste,function = "u0"; + ste,pins = "u0_a_1"; + }; + default_cfg1 { + ste,pins = "GPIO0_AJ5", "GPIO2_AH4"; /* CTS+RXD */ + ste,config = <&in_pu>; + }; + + default_cfg2 { + ste,pins = "GPIO1_AJ3", "GPIO3_AH3"; /* RTS+TXD */ + ste,config = <&out_hi>; + }; + }; + + uart0_sleep_mode: uart0_sleep { + sleep_cfg1 { + ste,pins = "GPIO0_AJ5", "GPIO2_AH4"; /* CTS+RXD */ + ste,config = <&slpm_in_wkup_pdis>; + }; + + sleep_cfg2 { + ste,pins = "GPIO1_AJ3"; /* RTS */ + ste,config = <&slpm_out_hi_wkup_pdis>; + }; + + sleep_cfg3 { + ste,pins = "GPIO3_AH3"; /* TXD */ + ste,config = <&slpm_out_wkup_pdis>; + }; + }; + }; + + uart1 { + uart1_default_mode: uart1_default { + default_mux { + ste,function = "u1"; + ste,pins = "u1rxtx_a_1"; + }; + default_cfg1 { + ste,pins = "GPIO4_AH6"; /* RXD */ + ste,config = <&in_pu>; + }; + + default_cfg2 { + ste,pins = "GPIO5_AG6"; /* TXD */ + ste,config = <&out_hi>; + }; + }; + + uart1_sleep_mode: uart1_sleep { + sleep_cfg1 { + ste,pins = "GPIO4_AH6"; /* RXD */ + ste,config = <&slpm_in_wkup_pdis>; + }; + + sleep_cfg2 { + ste,pins = "GPIO5_AG6"; /* TXD */ + ste,config = <&slpm_out_wkup_pdis>; + }; + }; + }; + + uart2 { + uart2_default_mode: uart2_default { + default_mux { + ste,function = "u2"; + ste,pins = "u2rxtx_c_1"; + }; + default_cfg1 { + ste,pins = "GPIO29_W2"; /* RXD */ + ste,config = <&in_pu>; + }; + + default_cfg2 { + ste,pins = "GPIO30_W3"; /* TXD */ + ste,config = <&out_hi>; + }; + }; + + uart2_sleep_mode: uart2_sleep { + sleep_cfg1 { + ste,pins = "GPIO29_W2"; /* RXD */ + ste,config = <&in_wkup_pdis>; + }; + + sleep_cfg2 { + ste,pins = "GPIO30_W3"; /* TXD */ + ste,config = <&out_wkup_pdis>; + }; + }; + }; + + /* Settings for all I2C default and sleep states */ + i2c0 { + i2c0_default_mode: i2c_default { + default_mux { + ste,function = "i2c0"; + ste,pins = "i2c0_a_1"; + }; + default_cfg1 { + ste,pins = "GPIO147_C15", "GPIO148_B16"; /* SDA/SCL */ + ste,config = <&in_pu>; + }; + }; + + i2c0_sleep_mode: i2c_sleep { + sleep_cfg1 { + ste,pins = "GPIO147_C15", "GPIO148_B16"; /* SDA/SCL */ + ste,config = <&slpm_in_wkup_pdis>; + }; + }; + }; + + i2c1 { + i2c1_default_mode: i2c_default { + default_mux { + ste,function = "i2c1"; + ste,pins = "i2c1_b_2"; + }; + default_cfg1 { + ste,pins = "GPIO16_AD3", "GPIO17_AD4"; /* SDA/SCL */ + ste,config = <&in_pu>; + }; + }; + + i2c1_sleep_mode: i2c_sleep { + sleep_cfg1 { + ste,pins = "GPIO16_AD3", "GPIO17_AD4"; /* SDA/SCL */ + ste,config = <&slpm_in_wkup_pdis>; + }; + }; + }; + + i2c2 { + i2c2_default_mode: i2c_default { + default_mux { + ste,function = "i2c2"; + ste,pins = "i2c2_b_2"; + }; + default_cfg1 { + ste,pins = "GPIO10_AF5", "GPIO11_AG4"; /* SDA/SCL */ + ste,config = <&in_pu>; + }; + }; + + i2c2_sleep_mode: i2c_sleep { + sleep_cfg1 { + ste,pins = "GPIO10_AF5", "GPIO11_AG4"; /* SDA/SCL */ + ste,config = <&slpm_in_wkup_pdis>; + }; + }; + }; + + i2c3 { + i2c3_default_mode: i2c_default { + default_mux { + ste,function = "i2c3"; + ste,pins = "i2c3_c_2"; + }; + default_cfg1 { + ste,pins = "GPIO229_AG7", "GPIO230_AF7"; /* SDA/SCL */ + ste,config = <&in_pu>; + }; + }; + + i2c3_sleep_mode: i2c_sleep { + sleep_cfg1 { + ste,pins = "GPIO229_AG7", "GPIO230_AF7"; /* SDA/SCL */ + ste,config = <&slpm_in_wkup_pdis>; + }; + }; + }; + + /* + * Activating I2C4 will conflict with UART1 about the same pins so do not + * enable I2C4 and UART1 at the same time. + */ + i2c4 { + i2c4_default_mode: i2c_default { + default_mux { + ste,function = "i2c4"; + ste,pins = "i2c4_b_1"; + }; + default_cfg1 { + ste,pins = "GPIO4_AH6", "GPIO5_AG6"; /* SDA/SCL */ + ste,config = <&in_pu>; + }; + }; + + i2c4_sleep_mode: i2c_sleep { + sleep_cfg1 { + ste,pins = "GPIO4_AH6", "GPIO5_AG6"; /* SDA/SCL */ + ste,config = <&slpm_in_wkup_pdis>; + }; + }; + }; + + /* Settings for all SPI default and sleep states */ + spi2 { + spi2_default_mode: spi_default { + default_mux { + ste,function = "spi2"; + ste,pins = "spi2_oc1_2"; + }; + default_cfg1 { + ste,pins = "GPIO216_AG12"; /* FRM */ + ste,config = <&gpio_out_hi>; + }; + default_cfg2 { + ste,pins = "GPIO218_AH11"; /* RXD */ + ste,config = <&in_pd>; + }; + default_cfg3 { + ste,pins = + "GPIO215_AH13", /* TXD */ + "GPIO217_AH12"; /* CLK */ + ste,config = <&out_lo>; + }; + }; + + spi2_idle_mode: spi_idle { + /* + * The idle mode is basically sleep mode sans wakeups. Also + * note that we have muxes the pins off the function here + * as we do not state any muxing. + */ + idle_cfg1 { + ste,pins = "GPIO218_AH11"; /* RXD */ + ste,config = <&slpm_in_pdis>; + }; + idle_cfg2 { + ste,pins = "GPIO215_AH13"; /* TXD */ + ste,config = <&slpm_out_lo_pdis>; + }; + idle_cfg3 { + ste,pins = "GPIO217_AH12"; /* CLK */ + ste,config = <&slpm_pdis>; + }; + }; + + spi2_sleep_mode: spi_sleep { + sleep_cfg1 { + ste,pins = + "GPIO216_AG12", /* FRM */ + "GPIO218_AH11"; /* RXD */ + ste,config = <&slpm_in_wkup_pdis>; + }; + sleep_cfg2 { + ste,pins = "GPIO215_AH13"; /* TXD */ + ste,config = <&slpm_out_lo_wkup_pdis>; + }; + sleep_cfg3 { + ste,pins = "GPIO217_AH12"; /* CLK */ + ste,config = <&slpm_wkup_pdis>; + }; + }; + }; + + /* Settings for all MMC/SD/SDIO default and sleep states */ + sdi0 { + /* This is the external SD card slot, 4 bits wide */ + sdi0_default_mode: sdi0_default { + default_mux { + ste,function = "mc0"; + ste,pins = "mc0_a_1"; + }; + default_cfg1 { + ste,pins = + "GPIO18_AC2", /* CMDDIR */ + "GPIO19_AC1", /* DAT0DIR */ + "GPIO20_AB4"; /* DAT2DIR */ + ste,config = <&out_hi>; + }; + default_cfg2 { + ste,pins = "GPIO22_AA3"; /* FBCLK */ + ste,config = <&in_nopull>; + }; + default_cfg3 { + ste,pins = "GPIO23_AA4"; /* CLK */ + ste,config = <&out_lo>; + }; + default_cfg4 { + ste,pins = + "GPIO24_AB2", /* CMD */ + "GPIO25_Y4", /* DAT0 */ + "GPIO26_Y2", /* DAT1 */ + "GPIO27_AA2", /* DAT2 */ + "GPIO28_AA1"; /* DAT3 */ + ste,config = <&in_pu>; + }; + }; + + sdi0_sleep_mode: sdi0_sleep { + sleep_cfg1 { + ste,pins = + "GPIO18_AC2", /* CMDDIR */ + "GPIO19_AC1", /* DAT0DIR */ + "GPIO20_AB4"; /* DAT2DIR */ + ste,config = <&slpm_out_hi_wkup_pdis>; + }; + sleep_cfg2 { + ste,pins = + "GPIO22_AA3", /* FBCLK */ + "GPIO24_AB2", /* CMD */ + "GPIO25_Y4", /* DAT0 */ + "GPIO26_Y2", /* DAT1 */ + "GPIO27_AA2", /* DAT2 */ + "GPIO28_AA1"; /* DAT3 */ + ste,config = <&slpm_in_wkup_pdis>; + }; + sleep_cfg3 { + ste,pins = "GPIO23_AA4"; /* CLK */ + ste,config = <&slpm_out_lo_wkup_pdis>; + }; + }; + }; + + sdi1 { + /* This is the WLAN SDIO 4 bits wide */ + sdi1_default_mode: sdi1_default { + default_mux { + ste,function = "mc1"; + ste,pins = "mc1_a_1"; + }; + default_cfg1 { + ste,pins = "GPIO208_AH16"; /* CLK */ + ste,config = <&out_lo>; + }; + default_cfg2 { + ste,pins = "GPIO209_AG15"; /* FBCLK */ + ste,config = <&in_nopull>; + }; + default_cfg3 { + ste,pins = + "GPIO210_AJ15", /* CMD */ + "GPIO211_AG14", /* DAT0 */ + "GPIO212_AF13", /* DAT1 */ + "GPIO213_AG13", /* DAT2 */ + "GPIO214_AH15"; /* DAT3 */ + ste,config = <&in_pu>; + }; + }; + + sdi1_sleep_mode: sdi1_sleep { + sleep_cfg1 { + ste,pins = "GPIO208_AH16"; /* CLK */ + ste,config = <&slpm_out_lo_wkup_pdis>; + }; + sleep_cfg2 { + ste,pins = + "GPIO209_AG15", /* FBCLK */ + "GPIO210_AJ15", /* CMD */ + "GPIO211_AG14", /* DAT0 */ + "GPIO212_AF13", /* DAT1 */ + "GPIO213_AG13", /* DAT2 */ + "GPIO214_AH15"; /* DAT3 */ + ste,config = <&slpm_in_wkup_pdis>; + }; + }; + }; + + sdi2 { + /* This is the eMMC 8 bits wide, usually PoP eMMC */ + sdi2_default_mode: sdi2_default { + default_mux { + ste,function = "mc2"; + ste,pins = "mc2_a_1"; + }; + default_cfg1 { + ste,pins = "GPIO128_A5"; /* CLK */ + ste,config = <&out_lo>; + }; + default_cfg2 { + ste,pins = "GPIO130_C8"; /* FBCLK */ + ste,config = <&in_nopull>; + }; + default_cfg3 { + ste,pins = + "GPIO129_B4", /* CMD */ + "GPIO131_A12", /* DAT0 */ + "GPIO132_C10", /* DAT1 */ + "GPIO133_B10", /* DAT2 */ + "GPIO134_B9", /* DAT3 */ + "GPIO135_A9", /* DAT4 */ + "GPIO136_C7", /* DAT5 */ + "GPIO137_A7", /* DAT6 */ + "GPIO138_C5"; /* DAT7 */ + ste,config = <&in_pu>; + }; + }; + + sdi2_sleep_mode: sdi2_sleep { + sleep_cfg1 { + ste,pins = "GPIO128_A5"; /* CLK */ + ste,config = <&out_lo_wkup_pdis>; + }; + sleep_cfg2 { + ste,pins = + "GPIO130_C8", /* FBCLK */ + "GPIO129_B4"; /* CMD */ + ste,config = <&in_wkup_pdis_en>; + }; + sleep_cfg3 { + ste,pins = + "GPIO131_A12", /* DAT0 */ + "GPIO132_C10", /* DAT1 */ + "GPIO133_B10", /* DAT2 */ + "GPIO134_B9", /* DAT3 */ + "GPIO135_A9", /* DAT4 */ + "GPIO136_C7", /* DAT5 */ + "GPIO137_A7", /* DAT6 */ + "GPIO138_C5"; /* DAT7 */ + ste,config = <&in_wkup_pdis>; + }; + }; + }; + + sdi4 { + /* This is the eMMC 8 bits wide, usually PCB-mounted eMMC */ + sdi4_default_mode: sdi4_default { + default_mux { + ste,function = "mc4"; + ste,pins = "mc4_a_1"; + }; + default_cfg1 { + ste,pins = "GPIO203_AE23"; /* CLK */ + ste,config = <&out_lo>; + }; + default_cfg2 { + ste,pins = "GPIO202_AF25"; /* FBCLK */ + ste,config = <&in_nopull>; + }; + default_cfg3 { + ste,pins = + "GPIO201_AF24", /* CMD */ + "GPIO200_AH26", /* DAT0 */ + "GPIO199_AH23", /* DAT1 */ + "GPIO198_AG25", /* DAT2 */ + "GPIO197_AH24", /* DAT3 */ + "GPIO207_AJ23", /* DAT4 */ + "GPIO206_AG24", /* DAT5 */ + "GPIO205_AG23", /* DAT6 */ + "GPIO204_AF23"; /* DAT7 */ + ste,config = <&in_pu>; + }; + }; + + sdi4_sleep_mode: sdi4_sleep { + sleep_cfg1 { + ste,pins = "GPIO203_AE23"; /* CLK */ + ste,config = <&out_lo_wkup_pdis>; + }; + sleep_cfg2 { + ste,pins = + "GPIO202_AF25", /* FBCLK */ + "GPIO201_AF24", /* CMD */ + "GPIO200_AH26", /* DAT0 */ + "GPIO199_AH23", /* DAT1 */ + "GPIO198_AG25", /* DAT2 */ + "GPIO197_AH24", /* DAT3 */ + "GPIO207_AJ23", /* DAT4 */ + "GPIO206_AG24", /* DAT5 */ + "GPIO205_AG23", /* DAT6 */ + "GPIO204_AF23"; /* DAT7 */ + ste,config = <&slpm_in_wkup_pdis>; + }; + }; + }; + + /* + * Multi-rate serial ports (MSPs) - MSP3 output is internal and + * cannot be muxed onto any pins. + */ + msp0 { + msp0_default_mode: msp0_default { + default_msp0_mux { + ste,function = "msp0"; + ste,pins = "msp0txrx_a_1", "msp0tfstck_a_1"; + }; + default_msp0_cfg { + ste,pins = + "GPIO12_AC4", /* TXD */ + "GPIO15_AC3", /* RXD */ + "GPIO13_AF3", /* TFS */ + "GPIO14_AE3"; /* TCK */ + ste,config = <&in_nopull>; + }; + }; + }; + + msp1 { + msp1_default_mode: msp1_default { + default_mux { + ste,function = "msp1"; + ste,pins = "msp1txrx_a_1", "msp1_a_1"; + }; + default_cfg1 { + ste,pins = "GPIO33_AF2"; + ste,config = <&out_lo>; + }; + default_cfg2 { + ste,pins = + "GPIO34_AE1", + "GPIO35_AE2", + "GPIO36_AG2"; + ste,config = <&in_nopull>; + }; + + }; + }; + + msp2 { + msp2_default_mode: msp2_default { + /* MSP2 usually used for HDMI audio */ + default_mux { + ste,function = "msp2"; + ste,pins = "msp2_a_1"; + }; + default_cfg1 { + ste,pins = + "GPIO193_AH27", /* TXD */ + "GPIO194_AF27", /* TCK */ + "GPIO195_AG28"; /* TFS */ + ste,config = <&in_pd>; + }; + default_cfg2 { + ste,pins = "GPIO196_AG26"; /* RXD */ + ste,config = <&out_lo>; + }; + }; + }; + + + musb { + musb_default_mode: musb_default { + default_mux { + ste,function = "usb"; + ste,pins = "usb_a_1"; + }; + default_cfg1 { + ste,pins = + "GPIO256_AF28", /* NXT */ + "GPIO258_AD29", /* XCLK */ + "GPIO259_AC29", /* DIR */ + "GPIO260_AD28", /* DAT7 */ + "GPIO261_AD26", /* DAT6 */ + "GPIO262_AE26", /* DAT5 */ + "GPIO263_AG29", /* DAT4 */ + "GPIO264_AE27", /* DAT3 */ + "GPIO265_AD27", /* DAT2 */ + "GPIO266_AC28", /* DAT1 */ + "GPIO267_AC27"; /* DAT0 */ + ste,config = <&in_nopull>; + }; + default_cfg2 { + ste,pins = "GPIO257_AE29"; /* STP */ + ste,config = <&out_hi>; + }; + }; + + musb_sleep_mode: musb_sleep { + sleep_cfg1 { + ste,pins = + "GPIO256_AF28", /* NXT */ + "GPIO258_AD29", /* XCLK */ + "GPIO259_AC29"; /* DIR */ + ste,config = <&slpm_wkup_pdis_en>; + }; + sleep_cfg2 { + ste,pins = "GPIO257_AE29"; /* STP */ + ste,config = <&slpm_out_hi_wkup_pdis>; + }; + sleep_cfg3 { + ste,pins = + "GPIO260_AD28", /* DAT7 */ + "GPIO261_AD26", /* DAT6 */ + "GPIO262_AE26", /* DAT5 */ + "GPIO263_AG29", /* DAT4 */ + "GPIO264_AE27", /* DAT3 */ + "GPIO265_AD27", /* DAT2 */ + "GPIO266_AC28", /* DAT1 */ + "GPIO267_AC27"; /* DAT0 */ + ste,config = <&slpm_in_wkup_pdis_en>; + }; + }; + }; + + mcde { + lcd_default_mode: lcd_default { + default_mux { + /* Mux in VSI0 and all the data lines */ + ste,function = "lcd"; + ste,pins = + "lcdvsi0_a_1", /* VSI0 for LCD */ + "lcd_d0_d7_a_1", /* Data lines */ + "lcd_d8_d11_a_1", /* TV-out */ + "lcdaclk_b_1", /* Clock line for TV-out */ + "lcdvsi1_a_1"; /* VSI1 for HDMI */ + }; + default_cfg1 { + ste,pins = + "GPIO68_E1", /* VSI0 */ + "GPIO69_E2"; /* VSI1 */ + ste,config = <&in_pu>; + }; + }; + lcd_sleep_mode: lcd_sleep { + sleep_cfg1 { + ste,pins = "GPIO69_E2"; /* VSI1 */ + ste,config = <&slpm_in_wkup_pdis>; + }; + }; + }; + + ske { + /* SKE keys on position 2 in an 8x8 matrix */ + ske_kpa2_default_mode: ske_kpa2_default { + default_mux { + ste,function = "kp"; + ste,pins = "kp_a_2"; + }; + default_cfg1 { + ste,pins = + "GPIO153_B17", /* I7 */ + "GPIO154_C16", /* I6 */ + "GPIO155_C19", /* I5 */ + "GPIO156_C17", /* I4 */ + "GPIO161_D21", /* I3 */ + "GPIO162_D20", /* I2 */ + "GPIO163_C20", /* I1 */ + "GPIO164_B21"; /* I0 */ + ste,config = <&in_pd>; + }; + default_cfg2 { + ste,pins = + "GPIO157_A18", /* O7 */ + "GPIO158_C18", /* O6 */ + "GPIO159_B19", /* O5 */ + "GPIO160_B20", /* O4 */ + "GPIO165_C21", /* O3 */ + "GPIO166_A22", /* O2 */ + "GPIO167_B24", /* O1 */ + "GPIO168_C22"; /* O0 */ + ste,config = <&out_lo>; + }; + }; + ske_kpa2_sleep_mode: ske_kpa2_sleep { + sleep_cfg1 { + ste,pins = + "GPIO153_B17", /* I7 */ + "GPIO154_C16", /* I6 */ + "GPIO155_C19", /* I5 */ + "GPIO156_C17", /* I4 */ + "GPIO161_D21", /* I3 */ + "GPIO162_D20", /* I2 */ + "GPIO163_C20", /* I1 */ + "GPIO164_B21"; /* I0 */ + ste,config = <&slpm_in_pu_wkup_pdis_en>; + }; + sleep_cfg2 { + ste,pins = + "GPIO157_A18", /* O7 */ + "GPIO158_C18", /* O6 */ + "GPIO159_B19", /* O5 */ + "GPIO160_B20", /* O4 */ + "GPIO165_C21", /* O3 */ + "GPIO166_A22", /* O2 */ + "GPIO167_B24", /* O1 */ + "GPIO168_C22"; /* O0 */ + ste,config = <&slpm_out_lo_pdis>; + }; + }; + /* + * SKE keys on position 1 and "other C1" combi giving + * six rows of six keys. + */ + ske_kpaoc1_default_mode: ske_kpaoc1_default { + default_mux { + ste,function = "kp"; + ste,pins = "kp_a_1", "kp_oc1_1"; + }; + default_cfg1 { + ste,pins = + "GPIO91_B6", /* KP_O0 */ + "GPIO90_A3", /* KP_O1 */ + "GPIO87_B3", /* KP_O2 */ + "GPIO86_C6", /* KP_O3 */ + "GPIO96_D8", /* KP_O6 */ + "GPIO94_D7"; /* KP_O7 */ + ste,config = <&out_lo>; + }; + default_cfg2 { + ste,pins = + "GPIO93_B7", /* KP_I0 */ + "GPIO92_D6", /* KP_I1 */ + "GPIO89_E6", /* KP_I2 */ + "GPIO88_C4", /* KP_I3 */ + "GPIO97_D9", /* KP_I6 */ + "GPIO95_E8"; /* KP_I7 */ + ste,config = <&in_pu>; + }; + }; + }; + + wlan { + wlan_default_mode: wlan_default { + /* + * Activate this mode with the WLAN chip. + * These are plain GPIO pins used by WLAN + */ + default_cfg1 { + ste,pins = + "GPIO226_AF8", /* WLAN_PMU_EN */ + "GPIO85_D5"; /* WLAN_ENA */ + ste,config = <&gpio_out_lo>; + }; + default_cfg2 { + ste,pins = "GPIO4_AH6"; /* WLAN_IRQ on UART1 */ + ste,config = <&gpio_in_pu>; + }; + }; + }; + }; + }; +}; diff --git a/arch/arm/boot/dts/ste-href-stuib.dtsi b/arch/arm/boot/dts/ste-href-stuib.dtsi index 76704ec..1c35744 100644 --- a/arch/arm/boot/dts/ste-href-stuib.dtsi +++ b/arch/arm/boot/dts/ste-href-stuib.dtsi @@ -12,6 +12,28 @@ #include <dt-bindings/interrupt-controller/irq.h> / { + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + vdd-supply = <&ab8500_ldo_aux1_reg>; + pinctrl-names = "default"; + pinctrl-0 = <&prox_stuib_mode>, <&hall_stuib_mode>; + + button@139 { + /* Proximity sensor */ + gpios = <&gpio6 25 0x4>; + linux,code = <11>; /* SW_FRONT_PROXIMITY */ + label = "SFH7741 Proximity Sensor"; + }; + button@145 { + /* Hall sensor */ + gpios = <&gpio4 17 0x4>; + linux,code = <0>; /* SW_LID */ + label = "HED54XXU11 Hall Effect Sensor"; + }; + }; + soc { i2c@80004000 { stmpe1601: stmpe1601@40 { @@ -74,5 +96,24 @@ rohm,flip-y; }; }; + + pinctrl { + prox { + prox_stuib_mode: prox_stuib { + stuib_cfg { + ste,pins = "GPIO217_AH12"; + ste,config = <&gpio_in_pu>; + }; + }; + }; + hall { + hall_stuib_mode: stuib_tvk { + stuib_cfg { + ste,pins = "GPIO145_C13"; + ste,config = <&gpio_in_pu>; + }; + }; + }; + }; }; }; diff --git a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi index 76d3ef1..c405653 100644 --- a/arch/arm/boot/dts/ste-href-tvk1281618.dtsi +++ b/arch/arm/boot/dts/ste-href-tvk1281618.dtsi @@ -14,27 +14,105 @@ #include <dt-bindings/interrupt-controller/irq.h> / { + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + vdd-supply = <&ab8500_ldo_aux1_reg>; + pinctrl-names = "default"; + pinctrl-0 = <&prox_tvk_mode>, <&hall_tvk_mode>; + + button@139 { + /* Proximity sensor */ + gpios = <&gpio6 25 0x4>; + linux,code = <11>; /* SW_FRONT_PROXIMITY */ + label = "SFH7741 Proximity Sensor"; + }; + button@145 { + /* Hall sensor */ + gpios = <&gpio4 17 0x4>; + linux,code = <0>; /* SW_LID */ + label = "HED54XXU11 Hall Effect Sensor"; + }; + }; + soc { - /* Add Synaptics touch screen, TC35892 keypad etc here */ + /* Add Synaptics touch screen, TC35893 keypad etc here */ i2c@80004000 { - tc3589x@44 { - compatible = "tc3589x"; + tc35893@44 { + compatible = "toshiba,tc35893"; reg = <0x44>; interrupt-parent = <&gpio6>; interrupts = <26 IRQ_TYPE_EDGE_RISING>; + pinctrl-names = "default"; + pinctrl-0 = <&tc35893_tvk_mode>; interrupt-controller; - #interrupt-cells = <2>; + #interrupt-cells = <1>; tc3589x_gpio { - compatible = "tc3589x-gpio"; - interrupts = <0 IRQ_TYPE_EDGE_RISING>; + compatible = "toshiba,tc3589x-gpio"; + interrupts = <0>; interrupt-controller; #interrupt-cells = <2>; gpio-controller; #gpio-cells = <2>; }; + tc3589x_keypad { + compatible = "toshiba,tc3589x-keypad"; + interrupts = <6>; + debounce-delay-ms = <4>; + keypad,num-columns = <8>; + keypad,num-rows = <8>; + linux,no-autorepeat; + linux,wakeup; + linux,keymap = <0x0301006b + 0x04010066 + 0x06040072 + 0x040200d7 + 0x0303006a + 0x0205000e + 0x0607008b + 0x0500001c + 0x0403000b + 0x03040034 + 0x05020067 + 0x0305006c + 0x040500e7 + 0x0005009e + 0x06020073 + 0x01030039 + 0x07060069 + 0x050500d9>; + }; + }; + }; + pinctrl { + /* Pull up this GPIO pin */ + tc35893 { + tc35893_tvk_mode: tc35893_tvk { + tvk_cfg { + ste,pins = "GPIO218_AH11"; + ste,config = <&gpio_in_pu>; + }; + }; + }; + prox { + prox_tvk_mode: prox_tvk { + tvk_cfg { + ste,pins = "GPIO217_AH12"; + ste,config = <&gpio_in_pu>; + }; + }; + }; + hall { + hall_tvk_mode: hall_tvk { + tvk_cfg { + ste,pins = "GPIO145_C13"; + ste,config = <&gpio_in_pu>; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/ste-href.dtsi b/arch/arm/boot/dts/ste-href.dtsi index aa3f020..0c1e8d8 100644 --- a/arch/arm/boot/dts/ste-href.dtsi +++ b/arch/arm/boot/dts/ste-href.dtsi @@ -11,37 +11,57 @@ #include <dt-bindings/interrupt-controller/irq.h> #include "ste-dbx5x0.dtsi" +#include "ste-href-family-pinctrl.dtsi" / { memory { reg = <0x00000000 0x20000000>; }; - gpio_keys { - compatible = "gpio-keys"; - #address-cells = <1>; - #size-cells = <0>; - - button@1 { - linux,code = <11>; - label = "SFH7741 Proximity Sensor"; + soc { + usb_per5@a03e0000 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&musb_default_mode>; + pinctrl-1 = <&musb_sleep_mode>; }; - }; - soc { uart@80120000 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&uart0_default_mode>; + pinctrl-1 = <&uart0_sleep_mode>; status = "okay"; }; uart@80121000 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&uart1_default_mode>; + pinctrl-1 = <&uart1_sleep_mode>; status = "okay"; }; uart@80007000 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&uart2_default_mode>; + pinctrl-1 = <&uart2_sleep_mode>; status = "okay"; }; + i2c@80004000 { + pinctrl-names = "default","sleep"; + pinctrl-0 = <&i2c0_default_mode>; + pinctrl-1 = <&i2c0_sleep_mode>; + }; + + i2c@80122000 { + pinctrl-names = "default","sleep"; + pinctrl-0 = <&i2c1_default_mode>; + pinctrl-1 = <&i2c1_sleep_mode>; + }; + i2c@80128000 { + pinctrl-names = "default","sleep"; + pinctrl-0 = <&i2c2_default_mode>; + pinctrl-1 = <&i2c2_sleep_mode>; lp5521@33 { compatible = "national,lp5521"; reg = <0x33>; @@ -85,6 +105,12 @@ }; }; + i2c@80110000 { + pinctrl-names = "default","sleep"; + pinctrl-0 = <&i2c3_default_mode>; + pinctrl-1 = <&i2c3_sleep_mode>; + }; + // External Micro SD slot sdi0_per1@80126000 { arm,primecell-periphid = <0x10480180>; @@ -94,8 +120,9 @@ mmc-cap-mmc-highspeed; vmmc-supply = <&ab8500_ldo_aux3_reg>; vqmmc-supply = <&vmmci>; - - cd-gpios = <&tc3589x_gpio 3 0x4>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdi0_default_mode>; + pinctrl-1 = <&sdi0_sleep_mode>; status = "okay"; }; @@ -105,6 +132,9 @@ arm,primecell-periphid = <0x10480180>; max-frequency = <100000000>; bus-width = <4>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdi1_default_mode>; + pinctrl-1 = <&sdi1_sleep_mode>; status = "okay"; }; @@ -115,6 +145,9 @@ max-frequency = <100000000>; bus-width = <8>; mmc-cap-mmc-highspeed; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdi2_default_mode>; + pinctrl-1 = <&sdi2_sleep_mode>; status = "okay"; }; @@ -126,6 +159,9 @@ bus-width = <8>; mmc-cap-mmc-highspeed; vmmc-supply = <&ab8500_ldo_aux2_reg>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdi4_default_mode>; + pinctrl-1 = <&sdi4_sleep_mode>; status = "okay"; }; @@ -137,7 +173,21 @@ stericsson,audio-codec = <&codec>; }; + msp0: msp@80123000 { + pinctrl-names = "default"; + pinctrl-0 = <&msp0_default_mode>; + status = "okay"; + }; + msp1: msp@80124000 { + pinctrl-names = "default"; + pinctrl-0 = <&msp1_default_mode>; + status = "okay"; + }; + + msp2: msp@80117000 { + pinctrl-names = "default"; + pinctrl-0 = <&msp2_default_mode>; status = "okay"; }; @@ -198,5 +248,11 @@ }; }; }; + + mcde@a0350000 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&lcd_default_mode>; + pinctrl-1 = <&lcd_sleep_mode>; + }; }; }; diff --git a/arch/arm/boot/dts/ste-hrefprev60.dtsi b/arch/arm/boot/dts/ste-hrefprev60.dtsi index b2cd7bc..40f0ecd 100644 --- a/arch/arm/boot/dts/ste-hrefprev60.dtsi +++ b/arch/arm/boot/dts/ste-hrefprev60.dtsi @@ -28,18 +28,20 @@ reg = <0x33>; }; - tc3589x@42 { - compatible = "tc3589x"; + tc35892@42 { + compatible = "toshiba,tc35892"; reg = <0x42>; interrupt-parent = <&gpio6>; interrupts = <25 IRQ_TYPE_EDGE_RISING>; + pinctrl-names = "default"; + pinctrl-0 = <&tc35892_hrefprev60_mode>; interrupt-controller; - #interrupt-cells = <2>; + #interrupt-cells = <1>; tc3589x_gpio: tc3589x_gpio { compatible = "tc3589x-gpio"; - interrupts = <0 IRQ_TYPE_EDGE_RISING>; + interrupts = <0>; interrupt-controller; #interrupt-cells = <2>; @@ -49,11 +51,77 @@ }; }; + ssp@80002000 { + /* + * On the first generation boards, this SSP/SPI port was connected + * to the AB8500. + */ + pinctrl-names = "default"; + pinctrl-0 = <&ssp0_hrefprev60_mode>; + }; + + // External Micro SD slot + sdi0_per1@80126000 { + cd-gpios = <&tc3589x_gpio 3 0x4>; + }; + vmmci: regulator-gpio { gpios = <&tc3589x_gpio 18 0x4>; enable-gpio = <&tc3589x_gpio 17 0x4>; + }; + + pinctrl { + /* Set this up using hogs */ + pinctrl-names = "default"; + pinctrl-0 = <&ipgpio_hrefprev60_mode>; - status = "okay"; + ssp0 { + ssp0_hrefprev60_mode: ssp0_hrefprev60_default { + hrefprev60_mux { + ste,function = "ssp0"; + ste,pins = "ssp0_a_1"; + }; + hrefprev60_cfg1 { + ste,pins = "GPIO145_C13"; /* RXD */ + ste,config = <&in_pd>; + }; + + }; + }; + sdi0 { + /* This additional pin needed on early MOP500 and HREFs previous to v60 */ + sdi0_default_mode: sdi0_default { + hrefprev60_mux { + ste,function = "mc0"; + ste,pins = "mc0dat31dir_a_1"; + }; + hrefprev60_cfg1 { + ste,pins = "GPIO21_AB3"; /* DAT31DIR */ + ste,config = <&out_hi>; + }; + + }; + }; + tc35892 { + tc35892_hrefprev60_mode: tc35892_hrefprev60 { + hrefprev60_cfg { + ste,pins = "GPIO217_AH12"; + ste,config = <&gpio_in_pu>; + }; + }; + }; + ipgpio { + ipgpio_hrefprev60_mode: ipgpio_hrefprev60 { + hrefprev60_mux { + ste,function = "ipgpio"; + ste,pins = "ipgpio0_c_1", "ipgpio1_c_1"; + }; + hrefprev60_cfg1 { + ste,pins = "GPIO6_AF6", "GPIO7_AG5"; + ste,config = <&in_pu>; + }; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/ste-hrefv60plus.dtsi b/arch/arm/boot/dts/ste-hrefv60plus.dtsi index aed511b..3b6d118 100644 --- a/arch/arm/boot/dts/ste-hrefv60plus.dtsi +++ b/arch/arm/boot/dts/ste-hrefv60plus.dtsi @@ -16,55 +16,226 @@ model = "ST-Ericsson HREF (v60+) platform with Device Tree"; compatible = "st-ericsson,hrefv60+", "st-ericsson,u8500"; - gpio_keys { - button@1 { - gpios = <&gpio5 25 0x4>; - }; - }; - soc { // External Micro SD slot sdi0_per1@80126000 { - arm,primecell-periphid = <0x10480180>; - max-frequency = <100000000>; - bus-width = <4>; - mmc-cap-sd-highspeed; - mmc-cap-mmc-highspeed; - vmmc-supply = <&ab8500_ldo_aux3_reg>; - cd-gpios = <&gpio2 31 0x4>; // 95 - - status = "okay"; }; - // WLAN SDIO channel - sdi1_per2@80118000 { - arm,primecell-periphid = <0x10480180>; - max-frequency = <100000000>; - bus-width = <4>; - - status = "okay"; - }; - - // PoP:ed eMMC - sdi2_per3@80005000 { - arm,primecell-periphid = <0x10480180>; - max-frequency = <100000000>; - bus-width = <8>; - mmc-cap-mmc-highspeed; - - status = "okay"; + vmmci: regulator-gpio { + gpios = <&gpio0 5 0x4>; + enable-gpio = <&gpio5 9 0x4>; }; - // On-board eMMC - sdi4_per2@80114000 { - arm,primecell-periphid = <0x10480180>; - max-frequency = <100000000>; - bus-width = <8>; - mmc-cap-mmc-highspeed; - vmmc-supply = <&ab8500_ldo_aux2_reg>; + pinctrl { + /* + * Set this up using hogs, as time goes by and as seems fit, these + * can be moved over to being controlled by respective device. + */ + pinctrl-names = "default"; + pinctrl-0 = <&ipgpio_hrefv60_mode>, + <&accel_hrefv60_mode>, + <&magneto_hrefv60_mode>, + <&etm_hrefv60_mode>, + <&nahj_hrefv60_mode>, + <&nfc_hrefv60_mode>, + <&force_hrefv60_mode>, + <&dipro_hrefv60_mode>, + <&vaudio_hf_hrefv60_mode>, + <&gbf_hrefv60_mode>, + <&hdtv_hrefv60_mode>, + <&touch_hrefv60_mode>; - status = "okay"; + sdi0 { + /* SD card detect GPIO pin, extend default state */ + sdi0_default_mode: sdi0_default { + default_hrefv60_cfg1 { + ste,pins = "GPIO95_E8"; + ste,config = <&gpio_in_pu>; + }; + }; + }; + ipgpio { + /* + * XENON Flashgun on image processor GPIO (controlled from image + * processor firmware), mux in these image processor GPIO lines 0 + * (XENON_FLASH_ID), 1 (XENON_READY) and there is an assistant + * LED on IP GPIO 4 (XENON_EN2) on altfunction C, that need bias + * from GPIO21 so pull up 0, 1 and drive 4 and GPIO21 low as output. + */ + ipgpio_hrefv60_mode: ipgpio_hrefv60 { + hrefv60_mux { + ste,function = "ipgpio"; + ste,pins = "ipgpio0_c_1", "ipgpio1_c_1", "ipgpio4_c_1"; + }; + hrefv60_cfg1 { + ste,pins = "GPIO6_AF6", "GPIO7_AG5"; + ste,config = <&in_pu>; + }; + hrefv60_cfg2 { + ste,pins = "GPIO21_AB3"; + ste,config = <&gpio_out_lo>; + }; + hrefv60_cfg3 { + ste,pins = "GPIO64_F3"; + ste,config = <&out_lo>; + }; + }; + }; + accelerometer { + accel_hrefv60_mode: accel_hrefv60 { + /* Accelerometer interrupt lines 1 & 2 */ + hrefv60_cfg1 { + ste,pins = "GPIO82_C1", "GPIO83_D3"; + ste,config = <&gpio_in_pu>; + }; + }; + }; + magnetometer { + magneto_hrefv60_mode: magneto_hrefv60 { + /* Magnetometer uses GPIO 31 and 32, pull these up/down respectively */ + hrefv60_cfg1 { + ste,pins = "GPIO31_V3"; + ste,config = <&gpio_in_pu>; + }; + hrefv60_cfg2 { + ste,pins = "GPIO32_V2"; + ste,config = <&gpio_in_pd>; + }; + }; + }; + etm { + /* + * Drive D19-D23 for the ETM PTM trace interface low, + * (presumably pins are unconnected therefore grounded here, + * the "other alt C1" setting enables these pins) + */ + etm_hrefv60_mode: etm_hrefv60 { + hrefv60_cfg1 { + ste,pins = + "GPIO70_G5", + "GPIO71_G4", + "GPIO72_H4", + "GPIO73_H3", + "GPIO74_J3"; + ste,config = <&gpio_out_lo>; + }; + }; + }; + nahj { + nahj_hrefv60_mode: nahj_hrefv60 { + /* NAHJ CTRL on GPIO76 to low, CTRL_INV on GPIO216 to high */ + hrefv60_cfg1 { + ste,pins = "GPIO76_J2"; + ste,config = <&gpio_out_lo>; + }; + hrefv60_cfg2 { + ste,pins = "GPIO216_AG12"; + ste,config = <&gpio_out_hi>; + }; + }; + }; + nfc { + nfc_hrefv60_mode: nfc_hrefv60 { + /* NFC ENA and RESET to low, pulldown IRQ line */ + hrefv60_cfg1 { + ste,pins = + "GPIO77_H1", /* NFC_ENA */ + "GPIO142_C11"; /* NFC_RESET */ + ste,config = <&gpio_out_lo>; + }; + hrefv60_cfg2 { + ste,pins = "GPIO144_B13"; /* NFC_IRQ */ + ste,config = <&gpio_in_pd>; + }; + }; + }; + force { + force_hrefv60_mode: force_hrefv60 { + hrefv60_cfg1 { + ste,pins = "GPIO91_B6"; /* FORCE_SENSING_INT */ + ste,config = <&gpio_in_pu>; + }; + hrefv60_cfg2 { + ste,pins = + "GPIO92_D6", /* FORCE_SENSING_RST */ + "GPIO97_D9"; /* FORCE_SENSING_WU */ + ste,config = <&gpio_out_lo>; + }; + }; + }; + dipro { + dipro_hrefv60_mode: dipro_hrefv60 { + hrefv60_cfg1 { + ste,pins = "GPIO139_C9"; /* DIPRO_INT */ + ste,config = <&gpio_in_pu>; + }; + }; + }; + vaudio_hf { + vaudio_hf_hrefv60_mode: vaudio_hf_hrefv60 { + /* Audio Amplifier HF enable GPIO */ + hrefv60_cfg1 { + ste,pins = "GPIO149_B14"; /* VAUDIO_HF_EN, enable MAX8968 */ + ste,config = <&gpio_out_hi>; + }; + }; + }; + gbf { + gbf_hrefv60_mode: gbf_hrefv60 { + /* + * GBF (GPS, Bluetooth, FM-radio) interface, + * pull low to reset state + */ + hrefv60_cfg1 { + ste,pins = "GPIO171_D23"; /* GBF_ENA_RESET */ + ste,config = <&gpio_out_lo>; + }; + }; + }; + hdtv { + hdtv_hrefv60_mode: hdtv_hrefv60 { + /* MSP : HDTV INTERFACE GPIO line */ + hrefv60_cfg1 { + ste,pins = "GPIO192_AJ27"; + ste,config = <&gpio_in_pd>; + }; + }; + }; + touch { + touch_hrefv60_mode: touch_hrefv60 { + /* + * Touch screen uses GPIO 143 for RST1, GPIO 146 for RST2 and + * GPIO 67 for interrupts. Pull-up the IRQ line and drive both + * reset signals low. + */ + hrefv60_cfg1 { + ste,pins = "GPIO143_D12", "GPIO146_D13"; + ste,config = <&gpio_out_lo>; + }; + hrefv60_cfg2 { + ste,pins = "GPIO67_G2"; + ste,config = <&gpio_in_pu>; + }; + }; + }; + mcde { + lcd_hrefv60_mode: lcd_hrefv60 { + /* + * Display Interface 1 uses GPIO 65 for RST (reset). + * Display Interface 2 uses GPIO 66 for RST (reset). + * Drive DISP1 reset high (not reset), driver DISP2 reset low (reset) + */ + hrefv60_cfg1 { + ste,pins ="GPIO65_F1"; + ste,config = <&gpio_out_hi>; + }; + hrefv60_cfg2 { + ste,pins ="GPIO66_G3"; + ste,config = <&gpio_out_lo>; + }; + }; + }; }; }; }; diff --git a/arch/arm/boot/dts/ste-nomadik-pinctrl.dtsi b/arch/arm/boot/dts/ste-nomadik-pinctrl.dtsi index efddee9..e6f22b2 100644 --- a/arch/arm/boot/dts/ste-nomadik-pinctrl.dtsi +++ b/arch/arm/boot/dts/ste-nomadik-pinctrl.dtsi @@ -31,17 +31,57 @@ ste,output = <OUTPUT_LOW>; }; + gpio_in_pu: gpio_input_pull_up { + ste,gpio = <GPIOMODE_ENABLED>; + ste,input = <INPUT_PULLUP>; + }; + + gpio_in_pd: gpio_input_pull_down { + ste,gpio = <GPIOMODE_ENABLED>; + ste,input = <INPUT_PULLDOWN>; + }; + gpio_out_lo: gpio_output_low { ste,gpio = <GPIOMODE_ENABLED>; ste,output = <OUTPUT_LOW>; }; + gpio_out_hi: gpio_output_high { + ste,gpio = <GPIOMODE_ENABLED>; + ste,output = <OUTPUT_HIGH>; + }; + + slpm_pdis: slpm_pdis { + ste,sleep = <SLPM_ENABLED>; + ste,sleep-wakeup = <SLPM_WAKEUP_DISABLE>; + ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>; + }; + + slpm_wkup_pdis: slpm_wkup_pdis { + ste,sleep = <SLPM_ENABLED>; + ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>; + ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>; + }; + + slpm_wkup_pdis_en: slpm_wkup_pdis_en { + ste,sleep = <SLPM_ENABLED>; + ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>; + ste,sleep-pull-disable = <SLPM_PDIS_ENABLED>; + }; + slpm_in_pu: slpm_in_pu { ste,sleep = <SLPM_ENABLED>; ste,sleep-input = <SLPM_INPUT_PULLUP>; ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>; }; + slpm_in_pdis: slpm_in_pdis { + ste,sleep = <SLPM_ENABLED>; + ste,sleep-input = <SLPM_DIR_INPUT>; + ste,sleep-wakeup = <SLPM_WAKEUP_DISABLE>; + ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>; + }; + slpm_in_wkup_pdis: slpm_in_wkup_pdis { ste,sleep = <SLPM_ENABLED>; ste,sleep-input = <SLPM_DIR_INPUT>; @@ -49,6 +89,20 @@ ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>; }; + slpm_in_wkup_pdis_en: slpm_in_wkup_pdis_en { + ste,sleep = <SLPM_ENABLED>; + ste,sleep-input = <SLPM_DIR_INPUT>; + ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>; + ste,sleep-pull-disable = <SLPM_PDIS_ENABLED>; + }; + + slpm_in_pu_wkup_pdis_en: slpm_in_wkup_pdis_en { + ste,sleep = <SLPM_ENABLED>; + ste,sleep-input = <SLPM_INPUT_PULLUP>; + ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>; + ste,sleep-pull-disable = <SLPM_PDIS_ENABLED>; + }; + slpm_out_lo: slpm_out_lo { ste,sleep = <SLPM_ENABLED>; ste,sleep-output = <SLPM_OUTPUT_LOW>; @@ -68,6 +122,20 @@ ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>; }; + slpm_out_lo_pdis: slpm_out_lo_pdis { + ste,sleep = <SLPM_ENABLED>; + ste,sleep-output = <SLPM_OUTPUT_LOW>; + ste,sleep-wakeup = <SLPM_WAKEUP_DISABLE>; + ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>; + }; + + slpm_out_lo_wkup_pdis: slpm_out_lo_wkup_pdis { + ste,sleep = <SLPM_ENABLED>; + ste,sleep-output = <SLPM_OUTPUT_LOW>; + ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>; + ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>; + }; + slpm_out_wkup_pdis: slpm_out_wkup_pdis { ste,sleep = <SLPM_ENABLED>; ste,sleep-output = <SLPM_DIR_OUTPUT>; @@ -81,6 +149,18 @@ ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>; }; + in_wkup_pdis_en: in_wkup_pdis_en { + ste,sleep-input = <SLPM_DIR_INPUT>; + ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>; + ste,sleep-pull-disable = <SLPM_PDIS_ENABLED>; + }; + + out_lo_wkup_pdis: out_lo_wkup_pdis { + ste,sleep-output = <SLPM_OUTPUT_LOW>; + ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>; + ste,sleep-pull-disable = <SLPM_PDIS_DISABLED>; + }; + out_hi_wkup_pdis: out_hi_wkup_pdis { ste,sleep-output = <SLPM_OUTPUT_HIGH>; ste,sleep-wakeup = <SLPM_WAKEUP_ENABLE>; diff --git a/arch/arm/boot/dts/ste-nomadik-s8815.dts b/arch/arm/boot/dts/ste-nomadik-s8815.dts index 16c3888..f557feb 100644 --- a/arch/arm/boot/dts/ste-nomadik-s8815.dts +++ b/arch/arm/boot/dts/ste-nomadik-s8815.dts @@ -67,10 +67,6 @@ /* Custom board node with GPIO pins to active etc */ usb-s8815 { - /* The S8815 is using this very GPIO pin for the SMSC91x IRQs */ - ethernet-gpio { - gpios = <&gpio3 8 0x1>; - }; /* This will bias the MMC/SD card detect line */ mmcsd-gpio { gpios = <&gpio3 16 0x1>; diff --git a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi index 79425e3..5acc044 100644 --- a/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi +++ b/arch/arm/boot/dts/ste-nomadik-stn8815.dtsi @@ -769,14 +769,14 @@ #size-cells = <1>; ranges; - vica: intc@0x10140000 { + vica: intc@10140000 { compatible = "arm,versatile-vic"; interrupt-controller; #interrupt-cells = <1>; reg = <0x10140000 0x20>; }; - vicb: intc@0x10140020 { + vicb: intc@10140020 { compatible = "arm,versatile-vic"; interrupt-controller; #interrupt-cells = <1>; diff --git a/arch/arm/boot/dts/ste-snowball.dts b/arch/arm/boot/dts/ste-snowball.dts index f0b39f8..97d5d21 100644 --- a/arch/arm/boot/dts/ste-snowball.dts +++ b/arch/arm/boot/dts/ste-snowball.dts @@ -11,6 +11,7 @@ /dts-v1/; #include "ste-dbx5x0.dtsi" +#include "ste-href-family-pinctrl.dtsi" / { model = "Calao Systems Snowball platform with device tree"; @@ -75,6 +76,8 @@ leds { compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&gpioled_snowball_mode>; used-led { label = "user_led"; gpios = <&gpio4 14 0x4>; @@ -84,6 +87,11 @@ }; soc { + usb_per5@a03e0000 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&musb_default_mode>; + pinctrl-1 = <&musb_sleep_mode>; + }; sound { compatible = "stericsson,snd-soc-mop500"; @@ -92,7 +100,21 @@ stericsson,audio-codec = <&codec>; }; + msp0: msp@80123000 { + pinctrl-names = "default"; + pinctrl-0 = <&msp0_default_mode>; + status = "okay"; + }; + msp1: msp@80124000 { + pinctrl-names = "default"; + pinctrl-0 = <&msp1_default_mode>; + status = "okay"; + }; + + msp2: msp@80117000 { + pinctrl-names = "default"; + pinctrl-0 = <&msp2_default_mode>; status = "okay"; }; @@ -110,6 +132,8 @@ interrupt-parent = <&gpio4>; vdd33a-supply = <&en_3v3_reg>; vddvario-supply = <&db8500_vape_reg>; + pinctrl-names = "default"; + pinctrl-0 = <ð_snowball_mode>; reg-shift = <1>; reg-io-width = <2>; @@ -122,10 +146,8 @@ }; vmmci: regulator-gpio { - gpios = <&gpio6 25 0x4>; - enable-gpio = <&gpio7 4 0x4>; - - status = "okay"; + gpios = <&gpio7 4 0x4>; + enable-gpio = <&gpio6 25 0x4>; }; // External Micro SD slot @@ -136,6 +158,9 @@ mmc-cap-mmc-highspeed; vmmc-supply = <&ab8500_ldo_aux3_reg>; vqmmc-supply = <&vmmci>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdi0_default_mode>; + pinctrl-1 = <&sdi0_sleep_mode>; cd-gpios = <&gpio6 26 0x4>; // 218 cd-inverted; @@ -143,6 +168,27 @@ status = "okay"; }; + // WLAN SDIO channel + sdi1_per2@80118000 { + arm,primecell-periphid = <0x10480180>; + max-frequency = <100000000>; + bus-width = <4>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdi1_default_mode>; + pinctrl-1 = <&sdi1_sleep_mode>; + + status = "okay"; + }; + + // Unused PoP eMMC - register and put it to sleep by default */ + sdi2_per3@80005000 { + arm,primecell-periphid = <0x10480180>; + pinctrl-names = "default"; + pinctrl-0 = <&sdi2_sleep_mode>; + + status = "okay"; + }; + // On-board eMMC sdi4_per2@80114000 { arm,primecell-periphid = <0x10480180>; @@ -150,22 +196,63 @@ bus-width = <8>; mmc-cap-mmc-highspeed; vmmc-supply = <&ab8500_ldo_aux2_reg>; + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&sdi4_default_mode>; + pinctrl-1 = <&sdi4_sleep_mode>; status = "okay"; }; uart@80120000 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&uart0_default_mode>; + pinctrl-1 = <&uart0_sleep_mode>; status = "okay"; }; uart@80121000 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&uart1_default_mode>; + pinctrl-1 = <&uart1_sleep_mode>; status = "okay"; }; uart@80007000 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&uart2_default_mode>; + pinctrl-1 = <&uart2_sleep_mode>; status = "okay"; }; + i2c@80004000 { + pinctrl-names = "default","sleep"; + pinctrl-0 = <&i2c0_default_mode>; + pinctrl-1 = <&i2c0_sleep_mode>; + }; + + i2c@80122000 { + pinctrl-names = "default","sleep"; + pinctrl-0 = <&i2c1_default_mode>; + pinctrl-1 = <&i2c1_sleep_mode>; + }; + + i2c@80128000 { + pinctrl-names = "default","sleep"; + pinctrl-0 = <&i2c2_default_mode>; + pinctrl-1 = <&i2c2_sleep_mode>; + }; + + i2c@80110000 { + pinctrl-names = "default","sleep"; + pinctrl-0 = <&i2c3_default_mode>; + pinctrl-1 = <&i2c3_sleep_mode>; + }; + + ssp@80002000 { + pinctrl-names = "default"; + pinctrl-0 = <&ssp0_snowball_mode>; + }; + cpufreq-cooling { status = "okay"; }; @@ -266,5 +353,141 @@ }; }; }; + + pinctrl { + /* + * Set this up using hogs, as time goes by and as seems fit, these + * can be moved over to being controlled by respective device. + */ + pinctrl-names = "default"; + pinctrl-0 = <&accel_snowball_mode>, + <&magneto_snowball_mode>, + <&gbf_snowball_mode>, + <&wlan_snowball_mode>; + + ethernet { + /* + * Mux in "SM" which is used for the + * SMSC911x Ethernet adapter + */ + eth_snowball_mode: eth_snowball { + snowball_mux { + ste,function = "sm"; + ste,pins = "sm_b_1"; + }; + /* LAN IRQ pin */ + snowball_cfg1 { + ste,pins = "GPIO140_B11"; + ste,config = <&in_nopull>; + }; + /* LAN reset pin */ + snowball_cfg2 { + ste,pins = "GPIO141_C12"; + ste,config = <&gpio_out_hi>; + }; + + }; + }; + sdi0 { + sdi0_default_mode: sdi0_default { + snowball_mux { + ste,function = "mc0"; + ste,pins = "mc0dat31dir_a_1"; + }; + snowball_cfg1 { + ste,pins = "GPIO21_AB3"; /* DAT31DIR */ + ste,config = <&out_hi>; + }; + + }; + }; + ssp0 { + ssp0_snowball_mode: ssp0_snowball_default { + snowball_mux { + ste,function = "ssp0"; + ste,pins = "ssp0_a_1"; + }; + snowball_cfg1 { + ste,pins = "GPIO144_B13"; /* FRM */ + ste,config = <&gpio_out_hi>; + }; + snowball_cfg2 { + ste,pins = "GPIO145_C13"; /* RXD */ + ste,config = <&in_pd>; + }; + snowball_cfg3 { + ste,pins = + "GPIO146_D13", /* TXD */ + "GPIO143_D12"; /* CLK */ + ste,config = <&out_lo>; + }; + + }; + }; + gpio_led { + gpioled_snowball_mode: gpioled_default { + snowball_cfg1 { + ste,pins = "GPIO142_C11"; + ste,config = <&gpio_out_hi>; + }; + + }; + }; + accelerometer { + accel_snowball_mode: accel_snowball { + /* Accelerometer lines */ + snowball_cfg1 { + ste,pins = + "GPIO163_C20", /* ACCEL_IRQ1 */ + "GPIO164_B21"; /* ACCEL_IRQ2 */ + ste,config = <&gpio_in_pu>; + }; + }; + }; + magnetometer { + magneto_snowball_mode: magneto_snowball { + snowball_cfg1 { + ste,pins = "GPIO165_C21"; /* MAG_DRDY */ + ste,config = <&gpio_in_pu>; + }; + }; + }; + gbf { + gbf_snowball_mode: gbf_snowball { + /* + * GBF (GPS, Bluetooth, FM-radio) interface, + * pull low to reset state + */ + snowball_cfg1 { + ste,pins = "GPIO171_D23"; /* GBF_ENA_RESET */ + ste,config = <&gpio_out_lo>; + }; + }; + }; + wlan { + wlan_snowball_mode: wlan_snowball { + /* + * Activate this mode with the WLAN chip. + * These are plain GPIO pins used by WLAN + */ + snowball_cfg1 { + ste,pins = + "GPIO161_D21", /* WLAN_PMU_EN */ + "GPIO215_AH13"; /* WLAN_ENA */ + ste,config = <&gpio_out_lo>; + }; + snowball_cfg2 { + ste,pins = "GPIO216_AG12"; /* WLAN_IRQ */ + ste,config = <&gpio_in_pu>; + }; + }; + }; + }; + + mcde@a0350000 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&lcd_default_mode>; + pinctrl-1 = <&lcd_sleep_mode>; + }; }; }; diff --git a/arch/arm/boot/dts/stih415-pinctrl.dtsi b/arch/arm/boot/dts/stih415-pinctrl.dtsi index 1d322b2..e56449d 100644 --- a/arch/arm/boot/dts/stih415-pinctrl.dtsi +++ b/arch/arm/boot/dts/stih415-pinctrl.dtsi @@ -86,6 +86,24 @@ }; }; }; + + sbc_i2c0 { + pinctrl_sbc_i2c0_default: sbc_i2c0-default { + st,pins { + sda = <&PIO4 6 ALT1 BIDIR>; + scl = <&PIO4 5 ALT1 BIDIR>; + }; + }; + }; + + sbc_i2c1 { + pinctrl_sbc_i2c1_default: sbc_i2c1-default { + st,pins { + sda = <&PIO3 2 ALT2 BIDIR>; + scl = <&PIO3 1 ALT2 BIDIR>; + }; + }; + }; }; pin-controller-front { @@ -143,6 +161,24 @@ reg = <0x7000 0x100>; st,bank-name = "PIO12"; }; + + i2c0 { + pinctrl_i2c0_default: i2c0-default { + st,pins { + sda = <&PIO9 3 ALT1 BIDIR>; + scl = <&PIO9 2 ALT1 BIDIR>; + }; + }; + }; + + i2c1 { + pinctrl_i2c1_default: i2c1-default { + st,pins { + sda = <&PIO12 1 ALT1 BIDIR>; + scl = <&PIO12 0 ALT1 BIDIR>; + }; + }; + }; }; pin-controller-rear { diff --git a/arch/arm/boot/dts/stih415.dtsi b/arch/arm/boot/dts/stih415.dtsi index 74ab8de..d9c7dd1 100644 --- a/arch/arm/boot/dts/stih415.dtsi +++ b/arch/arm/boot/dts/stih415.dtsi @@ -9,6 +9,7 @@ #include "stih41x.dtsi" #include "stih415-clock.dtsi" #include "stih415-pinctrl.dtsi" +#include <dt-bindings/interrupt-controller/arm-gic.h> / { L2: cache-controller { @@ -83,5 +84,57 @@ pinctrl-names = "default"; pinctrl-0 = <&pinctrl_sbc_serial1>; }; + + i2c@fed40000 { + compatible = "st,comms-ssc4-i2c"; + reg = <0xfed40000 0x110>; + interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&CLKS_ICN_REG_0>; + clock-names = "ssc"; + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0_default>; + + status = "disabled"; + }; + + i2c@fed41000 { + compatible = "st,comms-ssc4-i2c"; + reg = <0xfed41000 0x110>; + interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&CLKS_ICN_REG_0>; + clock-names = "ssc"; + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1_default>; + + status = "disabled"; + }; + + i2c@fe540000 { + compatible = "st,comms-ssc4-i2c"; + reg = <0xfe540000 0x110>; + interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&CLK_SYSIN>; + clock-names = "ssc"; + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sbc_i2c0_default>; + + status = "disabled"; + }; + + i2c@fe541000 { + compatible = "st,comms-ssc4-i2c"; + reg = <0xfe541000 0x110>; + interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&CLK_SYSIN>; + clock-names = "ssc"; + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sbc_i2c1_default>; + + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/stih416-pinctrl.dtsi b/arch/arm/boot/dts/stih416-pinctrl.dtsi index 0f246c9..b29ff4b 100644 --- a/arch/arm/boot/dts/stih416-pinctrl.dtsi +++ b/arch/arm/boot/dts/stih416-pinctrl.dtsi @@ -97,6 +97,24 @@ }; }; }; + + sbc_i2c0 { + pinctrl_sbc_i2c0_default: sbc_i2c0-default { + st,pins { + sda = <&PIO4 6 ALT1 BIDIR>; + scl = <&PIO4 5 ALT1 BIDIR>; + }; + }; + }; + + sbc_i2c1 { + pinctrl_sbc_i2c1_default: sbc_i2c1-default { + st,pins { + sda = <&PIO3 2 ALT2 BIDIR>; + scl = <&PIO3 1 ALT2 BIDIR>; + }; + }; + }; }; pin-controller-front { @@ -175,6 +193,23 @@ }; }; + i2c0 { + pinctrl_i2c0_default: i2c0-default { + st,pins { + sda = <&PIO9 3 ALT1 BIDIR>; + scl = <&PIO9 2 ALT1 BIDIR>; + }; + }; + }; + + i2c1 { + pinctrl_i2c1_default: i2c1-default { + st,pins { + sda = <&PIO12 1 ALT1 BIDIR>; + scl = <&PIO12 0 ALT1 BIDIR>; + }; + }; + }; }; pin-controller-rear { diff --git a/arch/arm/boot/dts/stih416.dtsi b/arch/arm/boot/dts/stih416.dtsi index 1a0326e..b7ab47b 100644 --- a/arch/arm/boot/dts/stih416.dtsi +++ b/arch/arm/boot/dts/stih416.dtsi @@ -9,6 +9,7 @@ #include "stih41x.dtsi" #include "stih416-clock.dtsi" #include "stih416-pinctrl.dtsi" +#include <dt-bindings/interrupt-controller/arm-gic.h> / { L2: cache-controller { compatible = "arm,pl310-cache"; @@ -92,5 +93,57 @@ pinctrl-0 = <&pinctrl_sbc_serial1>; clocks = <&CLK_SYSIN>; }; + + i2c@fed40000 { + compatible = "st,comms-ssc4-i2c"; + reg = <0xfed40000 0x110>; + interrupts = <GIC_SPI 187 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&CLK_S_ICN_REG_0>; + clock-names = "ssc"; + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c0_default>; + + status = "disabled"; + }; + + i2c@fed41000 { + compatible = "st,comms-ssc4-i2c"; + reg = <0xfed41000 0x110>; + interrupts = <GIC_SPI 188 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&CLK_S_ICN_REG_0>; + clock-names = "ssc"; + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_i2c1_default>; + + status = "disabled"; + }; + + i2c@fe540000 { + compatible = "st,comms-ssc4-i2c"; + reg = <0xfe540000 0x110>; + interrupts = <GIC_SPI 206 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&CLK_SYSIN>; + clock-names = "ssc"; + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sbc_i2c0_default>; + + status = "disabled"; + }; + + i2c@fe541000 { + compatible = "st,comms-ssc4-i2c"; + reg = <0xfe541000 0x110>; + interrupts = <GIC_SPI 207 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&CLK_SYSIN>; + clock-names = "ssc"; + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sbc_i2c1_default>; + + status = "disabled"; + }; }; }; diff --git a/arch/arm/boot/dts/stih41x-b2000.dtsi b/arch/arm/boot/dts/stih41x-b2000.dtsi index 8e694d2..1e6aa92 100644 --- a/arch/arm/boot/dts/stih41x-b2000.dtsi +++ b/arch/arm/boot/dts/stih41x-b2000.dtsi @@ -37,5 +37,14 @@ }; }; + /* HDMI Tx I2C */ + i2c@fed41000 { + /* HDMI V1.3a supports Standard mode only */ + clock-frequency = <100000>; + i2c-min-scl-pulse-width-us = <0>; + i2c-min-sda-pulse-width-us = <5>; + + status = "okay"; + }; }; }; diff --git a/arch/arm/boot/dts/stih41x-b2020.dtsi b/arch/arm/boot/dts/stih41x-b2020.dtsi index 133e181..0ef0a69 100644 --- a/arch/arm/boot/dts/stih41x-b2020.dtsi +++ b/arch/arm/boot/dts/stih41x-b2020.dtsi @@ -38,5 +38,27 @@ default-state = "off"; }; }; + + i2c@fed40000 { + status = "okay"; + }; + + /* HDMI Tx I2C */ + i2c@fed41000 { + /* HDMI V1.3a supports Standard mode only */ + clock-frequency = <100000>; + i2c-min-scl-pulse-width-us = <0>; + i2c-min-sda-pulse-width-us = <5>; + + status = "okay"; + }; + + i2c@fe540000 { + status = "okay"; + }; + + i2c@fe541000 { + status = "okay"; + }; }; }; diff --git a/arch/arm/boot/dts/sun4i-a10-a1000.dts b/arch/arm/boot/dts/sun4i-a10-a1000.dts index eb4d73b..d4b081d 100644 --- a/arch/arm/boot/dts/sun4i-a10-a1000.dts +++ b/arch/arm/boot/dts/sun4i-a10-a1000.dts @@ -18,10 +18,6 @@ model = "Mele A1000"; compatible = "mele,a1000", "allwinner,sun4i-a10"; - aliases { - serial0 = &uart0; - }; - soc@01c00000 { emac: ethernet@01c0b000 { pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts index 425a7db..b139ee6 100644 --- a/arch/arm/boot/dts/sun4i-a10-cubieboard.dts +++ b/arch/arm/boot/dts/sun4i-a10-cubieboard.dts @@ -17,15 +17,6 @@ model = "Cubietech Cubieboard"; compatible = "cubietech,a10-cubieboard", "allwinner,sun4i-a10"; - aliases { - serial0 = &uart0; - serial1 = &uart1; - }; - - chosen { - bootargs = "earlyprintk console=ttyS0,115200"; - }; - soc@01c00000 { emac: ethernet@01c0b000 { pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/sun4i-a10-hackberry.dts b/arch/arm/boot/dts/sun4i-a10-hackberry.dts index b3ae51f..3a1595f 100644 --- a/arch/arm/boot/dts/sun4i-a10-hackberry.dts +++ b/arch/arm/boot/dts/sun4i-a10-hackberry.dts @@ -18,10 +18,6 @@ model = "Miniand Hackberry"; compatible = "miniand,hackberry", "allwinner,sun4i-a10"; - chosen { - bootargs = "earlyprintk console=ttyS0,115200"; - }; - soc@01c00000 { emac: ethernet@01c0b000 { pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts index 0c1447c..70b3323 100644 --- a/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts +++ b/arch/arm/boot/dts/sun4i-a10-mini-xplus.dts @@ -18,10 +18,6 @@ model = "PineRiver Mini X-Plus"; compatible = "pineriver,mini-xplus", "allwinner,sun4i-a10"; - chosen { - bootargs = "earlyprintk console=ttyS0,115200"; - }; - soc@01c00000 { uart0: serial@01c28000 { pinctrl-names = "default"; diff --git a/arch/arm/boot/dts/sun4i-a10.dtsi b/arch/arm/boot/dts/sun4i-a10.dtsi index 319cc6b..040bb0e 100644 --- a/arch/arm/boot/dts/sun4i-a10.dtsi +++ b/arch/arm/boot/dts/sun4i-a10.dtsi @@ -15,6 +15,12 @@ / { interrupt-parent = <&intc>; + aliases { + ethernet0 = &emac; + serial0 = &uart0; + serial1 = &uart1; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -66,6 +72,29 @@ clocks = <&osc24M>; }; + pll4: pll4@01c20018 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-pll1-clk"; + reg = <0x01c20018 0x4>; + clocks = <&osc24M>; + }; + + pll5: pll5@01c20020 { + #clock-cells = <1>; + compatible = "allwinner,sun4i-pll5-clk"; + reg = <0x01c20020 0x4>; + clocks = <&osc24M>; + clock-output-names = "pll5_ddr", "pll5_other"; + }; + + pll6: pll6@01c20028 { + #clock-cells = <1>; + compatible = "allwinner,sun4i-pll6-clk"; + reg = <0x01c20028 0x4>; + clocks = <&osc24M>; + clock-output-names = "pll6_sata", "pll6_other", "pll6"; + }; + /* dummy is 200M */ cpu: cpu@01c20054 { #clock-cells = <0>; @@ -131,12 +160,11 @@ "apb0_ir1", "apb0_keypad"; }; - /* dummy is pll62 */ apb1_mux: apb1_mux@01c20058 { #clock-cells = <0>; compatible = "allwinner,sun4i-apb1-mux-clk"; reg = <0x01c20058 0x4>; - clocks = <&osc24M>, <&dummy>, <&osc32k>; + clocks = <&osc24M>, <&pll6 1>, <&osc32k>; }; apb1: apb1@01c20058 { @@ -158,6 +186,126 @@ "apb1_uart4", "apb1_uart5", "apb1_uart6", "apb1_uart7"; }; + + nand_clk: clk@01c20080 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c20080 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "nand"; + }; + + ms_clk: clk@01c20084 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c20084 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "ms"; + }; + + mmc0_clk: clk@01c20088 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c20088 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "mmc0"; + }; + + mmc1_clk: clk@01c2008c { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c2008c 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "mmc1"; + }; + + mmc2_clk: clk@01c20090 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c20090 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "mmc2"; + }; + + mmc3_clk: clk@01c20094 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c20094 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "mmc3"; + }; + + ts_clk: clk@01c20098 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c20098 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "ts"; + }; + + ss_clk: clk@01c2009c { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c2009c 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "ss"; + }; + + spi0_clk: clk@01c200a0 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c200a0 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "spi0"; + }; + + spi1_clk: clk@01c200a4 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c200a4 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "spi1"; + }; + + spi2_clk: clk@01c200a8 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c200a8 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "spi2"; + }; + + pata_clk: clk@01c200ac { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c200ac 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "pata"; + }; + + ir0_clk: clk@01c200b0 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c200b0 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "ir0"; + }; + + ir1_clk: clk@01c200b4 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c200b4 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "ir1"; + }; + + spi3_clk: clk@01c200d4 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c200d4 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "spi3"; + }; }; soc@01c00000 { @@ -266,11 +414,23 @@ reg = <0x01c20c90 0x10>; }; + rtc: rtc@01c20d00 { + compatible = "allwinner,sun4i-rtc"; + reg = <0x01c20d00 0x20>; + interrupts = <24>; + }; + sid: eeprom@01c23800 { compatible = "allwinner,sun4i-sid"; reg = <0x01c23800 0x10>; }; + rtp: rtp@01c25000 { + compatible = "allwinner,sun4i-ts"; + reg = <0x01c25000 0x100>; + interrupts = <29>; + }; + uart0: serial@01c28000 { compatible = "snps,dw-apb-uart"; reg = <0x01c28000 0x400>; diff --git a/arch/arm/boot/dts/sun5i-a10s.dtsi b/arch/arm/boot/dts/sun5i-a10s.dtsi index e674c94..ea16054 100644 --- a/arch/arm/boot/dts/sun5i-a10s.dtsi +++ b/arch/arm/boot/dts/sun5i-a10s.dtsi @@ -16,6 +16,10 @@ / { interrupt-parent = <&intc>; + aliases { + ethernet0 = &emac; + }; + cpus { cpu@0 { compatible = "arm,cortex-a8"; @@ -63,6 +67,29 @@ clocks = <&osc24M>; }; + pll4: pll4@01c20018 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-pll1-clk"; + reg = <0x01c20018 0x4>; + clocks = <&osc24M>; + }; + + pll5: pll5@01c20020 { + #clock-cells = <1>; + compatible = "allwinner,sun4i-pll5-clk"; + reg = <0x01c20020 0x4>; + clocks = <&osc24M>; + clock-output-names = "pll5_ddr", "pll5_other"; + }; + + pll6: pll6@01c20028 { + #clock-cells = <1>; + compatible = "allwinner,sun4i-pll6-clk"; + reg = <0x01c20028 0x4>; + clocks = <&osc24M>; + clock-output-names = "pll6_sata", "pll6_other", "pll6"; + }; + /* dummy is 200M */ cpu: cpu@01c20054 { #clock-cells = <0>; @@ -123,12 +150,11 @@ "apb0_ir", "apb0_keypad"; }; - /* dummy is pll62 */ apb1_mux: apb1_mux@01c20058 { #clock-cells = <0>; compatible = "allwinner,sun4i-apb1-mux-clk"; reg = <0x01c20058 0x4>; - clocks = <&osc24M>, <&dummy>, <&osc32k>; + clocks = <&osc24M>, <&pll6 1>, <&osc32k>; }; apb1: apb1@01c20058 { @@ -147,6 +173,102 @@ "apb1_i2c2", "apb1_uart0", "apb1_uart1", "apb1_uart2", "apb1_uart3"; }; + + nand_clk: clk@01c20080 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c20080 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "nand"; + }; + + ms_clk: clk@01c20084 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c20084 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "ms"; + }; + + mmc0_clk: clk@01c20088 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c20088 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "mmc0"; + }; + + mmc1_clk: clk@01c2008c { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c2008c 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "mmc1"; + }; + + mmc2_clk: clk@01c20090 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c20090 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "mmc2"; + }; + + ts_clk: clk@01c20098 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c20098 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "ts"; + }; + + ss_clk: clk@01c2009c { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c2009c 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "ss"; + }; + + spi0_clk: clk@01c200a0 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c200a0 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "spi0"; + }; + + spi1_clk: clk@01c200a4 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c200a4 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "spi1"; + }; + + spi2_clk: clk@01c200a8 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c200a8 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "spi2"; + }; + + ir0_clk: clk@01c200b0 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c200b0 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "ir0"; + }; + + mbus_clk: clk@01c2015c { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c2015c 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "mbus"; + }; }; soc@01c00000 { @@ -260,6 +382,12 @@ reg = <0x01c23800 0x10>; }; + rtp: rtp@01c25000 { + compatible = "allwinner,sun4i-ts"; + reg = <0x01c25000 0x100>; + interrupts = <29>; + }; + uart0: serial@01c28000 { compatible = "snps,dw-apb-uart"; reg = <0x01c28000 0x400>; diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts new file mode 100644 index 0000000..fe2ce0a --- /dev/null +++ b/arch/arm/boot/dts/sun5i-a13-olinuxino-micro.dts @@ -0,0 +1,68 @@ +/* + * Copyright 2012 Maxime Ripard + * Copyright 2013 Hans de Goede <hdegoede@redhat.com> + * + * Maxime Ripard <maxime.ripard@free-electrons.com> + * + * The code contained herein is licensed under the GNU General Public + * License. You may obtain a copy of the GNU General Public License + * Version 2 or later at the following locations: + * + * http://www.opensource.org/licenses/gpl-license.html + * http://www.gnu.org/copyleft/gpl.html + */ + +/dts-v1/; +/include/ "sun5i-a13.dtsi" + +/ { + model = "Olimex A13-Olinuxino Micro"; + compatible = "olimex,a13-olinuxino-micro", "allwinner,sun5i-a13"; + + soc@01c00000 { + pinctrl@01c20800 { + led_pins_olinuxinom: led_pins@0 { + allwinner,pins = "PG9"; + allwinner,function = "gpio_out"; + allwinner,drive = <1>; + allwinner,pull = <0>; + }; + }; + + uart1: serial@01c28400 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_pins_b>; + status = "okay"; + }; + + i2c0: i2c@01c2ac00 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + }; + + i2c1: i2c@01c2b000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; + }; + + i2c2: i2c@01c2b400 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_pins_olinuxinom>; + + power { + label = "a13-olinuxino-micro:green:power"; + gpios = <&pio 6 9 0>; + default-state = "on"; + }; + }; +}; diff --git a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts index 9e508dc..a4ba5ff 100644 --- a/arch/arm/boot/dts/sun5i-a13-olinuxino.dts +++ b/arch/arm/boot/dts/sun5i-a13-olinuxino.dts @@ -18,10 +18,6 @@ model = "Olimex A13-Olinuxino"; compatible = "olimex,a13-olinuxino", "allwinner,sun5i-a13"; - chosen { - bootargs = "earlyprintk console=ttyS0,115200"; - }; - soc@01c00000 { pinctrl@01c20800 { led_pins_olinuxino: led_pins@0 { diff --git a/arch/arm/boot/dts/sun5i-a13.dtsi b/arch/arm/boot/dts/sun5i-a13.dtsi index 1ccd75d..320335a 100644 --- a/arch/arm/boot/dts/sun5i-a13.dtsi +++ b/arch/arm/boot/dts/sun5i-a13.dtsi @@ -67,6 +67,29 @@ clocks = <&osc24M>; }; + pll4: pll4@01c20018 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-pll1-clk"; + reg = <0x01c20018 0x4>; + clocks = <&osc24M>; + }; + + pll5: pll5@01c20020 { + #clock-cells = <1>; + compatible = "allwinner,sun4i-pll5-clk"; + reg = <0x01c20020 0x4>; + clocks = <&osc24M>; + clock-output-names = "pll5_ddr", "pll5_other"; + }; + + pll6: pll6@01c20028 { + #clock-cells = <1>; + compatible = "allwinner,sun4i-pll6-clk"; + reg = <0x01c20028 0x4>; + clocks = <&osc24M>; + clock-output-names = "pll6_sata", "pll6_other", "pll6"; + }; + /* dummy is 200M */ cpu: cpu@01c20054 { #clock-cells = <0>; @@ -125,12 +148,11 @@ clock-output-names = "apb0_codec", "apb0_pio", "apb0_ir"; }; - /* dummy is pll6 */ apb1_mux: apb1_mux@01c20058 { #clock-cells = <0>; compatible = "allwinner,sun4i-apb1-mux-clk"; reg = <0x01c20058 0x4>; - clocks = <&osc24M>, <&dummy>, <&osc32k>; + clocks = <&osc24M>, <&pll6 1>, <&osc32k>; }; apb1: apb1@01c20058 { @@ -148,6 +170,102 @@ clock-output-names = "apb1_i2c0", "apb1_i2c1", "apb1_i2c2", "apb1_uart1", "apb1_uart3"; }; + + nand_clk: clk@01c20080 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c20080 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "nand"; + }; + + ms_clk: clk@01c20084 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c20084 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "ms"; + }; + + mmc0_clk: clk@01c20088 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c20088 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "mmc0"; + }; + + mmc1_clk: clk@01c2008c { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c2008c 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "mmc1"; + }; + + mmc2_clk: clk@01c20090 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c20090 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "mmc2"; + }; + + ts_clk: clk@01c20098 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c20098 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "ts"; + }; + + ss_clk: clk@01c2009c { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c2009c 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "ss"; + }; + + spi0_clk: clk@01c200a0 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c200a0 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "spi0"; + }; + + spi1_clk: clk@01c200a4 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c200a4 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "spi1"; + }; + + spi2_clk: clk@01c200a8 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c200a8 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "spi2"; + }; + + ir0_clk: clk@01c200b0 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c200b0 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "ir0"; + }; + + mbus_clk: clk@01c2015c { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c2015c 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "mbus"; + }; }; soc@01c00000 { @@ -227,6 +345,12 @@ reg = <0x01c23800 0x10>; }; + rtp: rtp@01c25000 { + compatible = "allwinner,sun4i-ts"; + reg = <0x01c25000 0x100>; + interrupts = <29>; + }; + uart1: serial@01c28400 { compatible = "snps,dw-apb-uart"; reg = <0x01c28400 0x400>; diff --git a/arch/arm/boot/dts/sun6i-a31.dtsi b/arch/arm/boot/dts/sun6i-a31.dtsi index 7f5878c..5256ad9 100644 --- a/arch/arm/boot/dts/sun6i-a31.dtsi +++ b/arch/arm/boot/dts/sun6i-a31.dtsi @@ -212,6 +212,24 @@ }; }; + ahb1_rst: reset@01c202c0 { + #reset-cells = <1>; + compatible = "allwinner,sun6i-a31-ahb1-reset"; + reg = <0x01c202c0 0xc>; + }; + + apb1_rst: reset@01c202d0 { + #reset-cells = <1>; + compatible = "allwinner,sun6i-a31-clock-reset"; + reg = <0x01c202d0 0x4>; + }; + + apb2_rst: reset@01c202d8 { + #reset-cells = <1>; + compatible = "allwinner,sun6i-a31-clock-reset"; + reg = <0x01c202d8 0x4>; + }; + timer@01c20c00 { compatible = "allwinner,sun4i-timer"; reg = <0x01c20c00 0xa0>; @@ -235,6 +253,7 @@ reg-shift = <2>; reg-io-width = <4>; clocks = <&apb2_gates 16>; + resets = <&apb2_rst 16>; status = "disabled"; }; @@ -245,6 +264,7 @@ reg-shift = <2>; reg-io-width = <4>; clocks = <&apb2_gates 17>; + resets = <&apb2_rst 17>; status = "disabled"; }; @@ -255,6 +275,7 @@ reg-shift = <2>; reg-io-width = <4>; clocks = <&apb2_gates 18>; + resets = <&apb2_rst 18>; status = "disabled"; }; @@ -265,6 +286,7 @@ reg-shift = <2>; reg-io-width = <4>; clocks = <&apb2_gates 19>; + resets = <&apb2_rst 19>; status = "disabled"; }; @@ -275,6 +297,7 @@ reg-shift = <2>; reg-io-width = <4>; clocks = <&apb2_gates 20>; + resets = <&apb2_rst 20>; status = "disabled"; }; @@ -285,6 +308,7 @@ reg-shift = <2>; reg-io-width = <4>; clocks = <&apb2_gates 21>; + resets = <&apb2_rst 21>; status = "disabled"; }; @@ -298,5 +322,15 @@ #interrupt-cells = <3>; interrupts = <1 9 0xf04>; }; + + cpucfg@01f01c00 { + compatible = "allwinner,sun6i-a31-cpuconfig"; + reg = <0x01f01c00 0x300>; + }; + + prcm@01f01c00 { + compatible = "allwinner,sun6i-a31-prcm"; + reg = <0x01f01400 0x200>; + }; }; }; diff --git a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts index 8a1009d..f9dcb61 100644 --- a/arch/arm/boot/dts/sun7i-a20-cubietruck.dts +++ b/arch/arm/boot/dts/sun7i-a20-cubietruck.dts @@ -33,6 +33,24 @@ pinctrl-0 = <&uart0_pins_a>; status = "okay"; }; + + i2c0: i2c@01c2ac00 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins_a>; + status = "okay"; + }; + + i2c1: i2c@01c2b000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c1_pins_a>; + status = "okay"; + }; + + i2c2: i2c@01c2b400 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c2_pins_a>; + status = "okay"; + }; }; leds { diff --git a/arch/arm/boot/dts/sun7i-a20.dtsi b/arch/arm/boot/dts/sun7i-a20.dtsi index 0135039..119f066 100644 --- a/arch/arm/boot/dts/sun7i-a20.dtsi +++ b/arch/arm/boot/dts/sun7i-a20.dtsi @@ -16,6 +16,10 @@ / { interrupt-parent = <&gic>; + aliases { + ethernet0 = &emac; + }; + cpus { #address-cells = <1>; #size-cells = <0>; @@ -49,10 +53,11 @@ clock-frequency = <24000000>; }; - osc32k: osc32k { + osc32k: clk@0 { #clock-cells = <0>; compatible = "fixed-clock"; clock-frequency = <32768>; + clock-output-names = "osc32k"; }; pll1: pll1@01c20000 { @@ -62,23 +67,34 @@ clocks = <&osc24M>; }; - /* - * This is a dummy clock, to be used as placeholder on - * other mux clocks when a specific parent clock is not - * yet implemented. It should be dropped when the driver - * is complete. - */ - pll6: pll6 { + pll4: pll4@01c20018 { #clock-cells = <0>; - compatible = "fixed-clock"; - clock-frequency = <0>; + compatible = "allwinner,sun4i-pll1-clk"; + reg = <0x01c20018 0x4>; + clocks = <&osc24M>; + }; + + pll5: pll5@01c20020 { + #clock-cells = <1>; + compatible = "allwinner,sun4i-pll5-clk"; + reg = <0x01c20020 0x4>; + clocks = <&osc24M>; + clock-output-names = "pll5_ddr", "pll5_other"; + }; + + pll6: pll6@01c20028 { + #clock-cells = <1>; + compatible = "allwinner,sun4i-pll6-clk"; + reg = <0x01c20028 0x4>; + clocks = <&osc24M>; + clock-output-names = "pll6_sata", "pll6_other", "pll6"; }; cpu: cpu@01c20054 { #clock-cells = <0>; compatible = "allwinner,sun4i-cpu-clk"; reg = <0x01c20054 0x4>; - clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll6>; + clocks = <&osc32k>, <&osc24M>, <&pll1>, <&pll6 1>; }; axi: axi@01c20054 { @@ -137,7 +153,7 @@ #clock-cells = <0>; compatible = "allwinner,sun4i-apb1-mux-clk"; reg = <0x01c20058 0x4>; - clocks = <&osc24M>, <&pll6>, <&osc32k>; + clocks = <&osc24M>, <&pll6 1>, <&osc32k>; }; apb1: apb1@01c20058 { @@ -159,6 +175,162 @@ "apb1_uart2", "apb1_uart3", "apb1_uart4", "apb1_uart5", "apb1_uart6", "apb1_uart7"; }; + + nand_clk: clk@01c20080 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c20080 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "nand"; + }; + + ms_clk: clk@01c20084 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c20084 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "ms"; + }; + + mmc0_clk: clk@01c20088 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c20088 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "mmc0"; + }; + + mmc1_clk: clk@01c2008c { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c2008c 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "mmc1"; + }; + + mmc2_clk: clk@01c20090 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c20090 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "mmc2"; + }; + + mmc3_clk: clk@01c20094 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c20094 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "mmc3"; + }; + + ts_clk: clk@01c20098 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c20098 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "ts"; + }; + + ss_clk: clk@01c2009c { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c2009c 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "ss"; + }; + + spi0_clk: clk@01c200a0 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c200a0 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "spi0"; + }; + + spi1_clk: clk@01c200a4 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c200a4 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "spi1"; + }; + + spi2_clk: clk@01c200a8 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c200a8 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "spi2"; + }; + + pata_clk: clk@01c200ac { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c200ac 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "pata"; + }; + + ir0_clk: clk@01c200b0 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c200b0 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "ir0"; + }; + + ir1_clk: clk@01c200b4 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c200b4 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "ir1"; + }; + + spi3_clk: clk@01c200d4 { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c200d4 0x4>; + clocks = <&osc24M>, <&pll6 1>, <&pll5 1>; + clock-output-names = "spi3"; + }; + + mbus_clk: clk@01c2015c { + #clock-cells = <0>; + compatible = "allwinner,sun4i-mod0-clk"; + reg = <0x01c2015c 0x4>; + clocks = <&osc24M>, <&pll6 2>, <&pll5 1>; + clock-output-names = "mbus"; + }; + + /* + * Dummy clock used by output clocks + */ + osc24M_32k: clk@1 { + #clock-cells = <0>; + compatible = "fixed-factor-clock"; + clock-div = <750>; + clock-mult = <1>; + clocks = <&osc24M>; + clock-output-names = "osc24M_32k"; + }; + + clk_out_a: clk@01c201f0 { + #clock-cells = <0>; + compatible = "allwinner,sun7i-a20-out-clk"; + reg = <0x01c201f0 0x4>; + clocks = <&osc24M_32k>, <&osc32k>, <&osc24M>; + clock-output-names = "clk_out_a"; + }; + + clk_out_b: clk@01c201f4 { + #clock-cells = <0>; + compatible = "allwinner,sun7i-a20-out-clk"; + reg = <0x01c201f4 0x4>; + clocks = <&osc24M_32k>, <&osc32k>, <&osc24M>; + clock-output-names = "clk_out_b"; + }; }; soc@01c00000 { @@ -246,6 +418,20 @@ allwinner,drive = <0>; allwinner,pull = <0>; }; + + clk_out_a_pins_a: clk_out_a@0 { + allwinner,pins = "PI12"; + allwinner,function = "clk_out_a"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; + + clk_out_b_pins_a: clk_out_b@0 { + allwinner,pins = "PI13"; + allwinner,function = "clk_out_b"; + allwinner,drive = <0>; + allwinner,pull = <0>; + }; }; timer@01c20c00 { @@ -265,11 +451,23 @@ reg = <0x01c20c90 0x10>; }; + rtc: rtc@01c20d00 { + compatible = "allwinner,sun7i-a20-rtc"; + reg = <0x01c20d00 0x20>; + interrupts = <0 24 1>; + }; + sid: eeprom@01c23800 { compatible = "allwinner,sun7i-a20-sid"; reg = <0x01c23800 0x200>; }; + rtp: rtp@01c25000 { + compatible = "allwinner,sun4i-ts"; + reg = <0x01c25000 0x100>; + interrupts = <0 29 4>; + }; + uart0: serial@01c28000 { compatible = "snps,dw-apb-uart"; reg = <0x01c28000 0x400>; diff --git a/arch/arm/boot/dts/tegra114-dalmore.dts b/arch/arm/boot/dts/tegra114-dalmore.dts index cb5ec23..73aecfb 100644 --- a/arch/arm/boot/dts/tegra114-dalmore.dts +++ b/arch/arm/boot/dts/tegra114-dalmore.dts @@ -7,11 +7,42 @@ model = "NVIDIA Tegra114 Dalmore evaluation board"; compatible = "nvidia,dalmore", "nvidia,tegra114"; + aliases { + rtc0 = "/i2c@7000d000/tps65913@58"; + rtc1 = "/rtc@7000e000"; + }; + memory { reg = <0x80000000 0x40000000>; }; - pinmux { + host1x@50000000 { + hdmi@54280000 { + status = "okay"; + + vdd-supply = <&vdd_hdmi_reg>; + pll-supply = <&palmas_smps3_reg>; + + nvidia,ddc-i2c-bus = <&hdmi_ddc>; + nvidia,hpd-gpio = + <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>; + }; + + dsi@54300000 { + status = "okay"; + + panel@0 { + compatible = "panasonic,vvx10f004b00", + "simple-panel"; + reg = <0>; + + power-supply = <&avdd_lcd_reg>; + backlight = <&backlight>; + }; + }; + }; + + pinmux@70000868 { pinctrl-names = "default"; pinctrl-0 = <&state_default>; @@ -19,41 +50,41 @@ clk1_out_pw4 { nvidia,pins = "clk1_out_pw4"; nvidia,function = "extperiph1"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - nvidia,enable-input = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; dap1_din_pn1 { nvidia,pins = "dap1_din_pn1"; nvidia,function = "i2s0"; - nvidia,pull = <0>; - nvidia,tristate = <1>; - nvidia,enable-input = <1>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; dap1_dout_pn2 { nvidia,pins = "dap1_dout_pn2", "dap1_fs_pn0", "dap1_sclk_pn3"; nvidia,function = "i2s0"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - nvidia,enable-input = <1>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; dap2_din_pa4 { nvidia,pins = "dap2_din_pa4"; nvidia,function = "i2s1"; - nvidia,pull = <0>; - nvidia,tristate = <1>; - nvidia,enable-input = <1>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; dap2_dout_pa5 { nvidia,pins = "dap2_dout_pa5", "dap2_fs_pa2", "dap2_sclk_pa3"; nvidia,function = "i2s1"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - nvidia,enable-input = <1>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; dap4_din_pp5 { nvidia,pins = "dap4_din_pp5", @@ -61,17 +92,17 @@ "dap4_fs_pp4", "dap4_sclk_pp7"; nvidia,function = "i2s3"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - nvidia,enable-input = <1>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; dvfs_pwm_px0 { nvidia,pins = "dvfs_pwm_px0", "dvfs_clk_px2"; nvidia,function = "cldvfs"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - nvidia,enable-input = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; ulpi_clk_py0 { nvidia,pins = "ulpi_clk_py0", @@ -84,128 +115,128 @@ "ulpi_data6_po7", "ulpi_data7_po0"; nvidia,function = "ulpi"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - nvidia,enable-input = <1>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; ulpi_dir_py1 { nvidia,pins = "ulpi_dir_py1", "ulpi_nxt_py2"; nvidia,function = "ulpi"; - nvidia,pull = <0>; - nvidia,tristate = <1>; - nvidia,enable-input = <1>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; ulpi_stp_py3 { nvidia,pins = "ulpi_stp_py3"; nvidia,function = "ulpi"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - nvidia,enable-input = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; cam_i2c_scl_pbb1 { nvidia,pins = "cam_i2c_scl_pbb1", "cam_i2c_sda_pbb2"; nvidia,function = "i2c3"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - nvidia,enable-input = <1>; - nvidia,lock = <0>; - nvidia,open-drain = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; }; cam_mclk_pcc0 { nvidia,pins = "cam_mclk_pcc0", "pbb0"; nvidia,function = "vi_alt3"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - nvidia,enable-input = <0>; - nvidia,lock = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; }; gen2_i2c_scl_pt5 { nvidia,pins = "gen2_i2c_scl_pt5", "gen2_i2c_sda_pt6"; nvidia,function = "i2c2"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - nvidia,enable-input = <1>; - nvidia,lock = <0>; - nvidia,open-drain = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; }; gmi_a16_pj7 { nvidia,pins = "gmi_a16_pj7"; nvidia,function = "uartd"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - nvidia,enable-input = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; gmi_a17_pb0 { nvidia,pins = "gmi_a17_pb0", "gmi_a18_pb1"; nvidia,function = "uartd"; - nvidia,pull = <0>; - nvidia,tristate = <1>; - nvidia,enable-input = <1>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; gmi_a19_pk7 { nvidia,pins = "gmi_a19_pk7"; nvidia,function = "uartd"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - nvidia,enable-input = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; gmi_ad5_pg5 { nvidia,pins = "gmi_ad5_pg5", "gmi_cs6_n_pi3", "gmi_wr_n_pi0"; nvidia,function = "spi4"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - nvidia,enable-input = <1>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; gmi_ad6_pg6 { nvidia,pins = "gmi_ad6_pg6", "gmi_ad7_pg7"; nvidia,function = "spi4"; - nvidia,pull = <2>; - nvidia,tristate = <0>; - nvidia,enable-input = <1>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; gmi_ad12_ph4 { nvidia,pins = "gmi_ad12_ph4"; nvidia,function = "rsvd4"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - nvidia,enable-input = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; gmi_ad9_ph1 { nvidia,pins = "gmi_ad9_ph1"; nvidia,function = "pwm1"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - nvidia,enable-input = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; gmi_cs1_n_pj2 { nvidia,pins = "gmi_cs1_n_pj2", "gmi_oe_n_pi1"; nvidia,function = "soc"; - nvidia,pull = <0>; - nvidia,tristate = <1>; - nvidia,enable-input = <1>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; clk2_out_pw5 { nvidia,pins = "clk2_out_pw5"; nvidia,function = "extperiph2"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - nvidia,enable-input = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; sdmmc1_clk_pz0 { nvidia,pins = "sdmmc1_clk_pz0"; nvidia,function = "sdmmc1"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - nvidia,enable-input = <1>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; sdmmc1_cmd_pz1 { nvidia,pins = "sdmmc1_cmd_pz1", @@ -214,23 +245,23 @@ "sdmmc1_dat2_py5", "sdmmc1_dat3_py4"; nvidia,function = "sdmmc1"; - nvidia,pull = <2>; - nvidia,tristate = <0>; - nvidia,enable-input = <1>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; sdmmc1_wp_n_pv3 { nvidia,pins = "sdmmc1_wp_n_pv3"; nvidia,function = "spi4"; - nvidia,pull = <2>; - nvidia,tristate = <0>; - nvidia,enable-input = <0>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; sdmmc3_clk_pa6 { nvidia,pins = "sdmmc3_clk_pa6"; nvidia,function = "sdmmc3"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - nvidia,enable-input = <1>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; sdmmc3_cmd_pa7 { nvidia,pins = "sdmmc3_cmd_pa7", @@ -242,16 +273,16 @@ "sdmmc3_clk_lb_out_pee4", "sdmmc3_clk_lb_in_pee5"; nvidia,function = "sdmmc3"; - nvidia,pull = <2>; - nvidia,tristate = <0>; - nvidia,enable-input = <1>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; sdmmc4_clk_pcc4 { nvidia,pins = "sdmmc4_clk_pcc4"; nvidia,function = "sdmmc4"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - nvidia,enable-input = <1>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; sdmmc4_cmd_pt7 { nvidia,pins = "sdmmc4_cmd_pt7", @@ -264,16 +295,16 @@ "sdmmc4_dat6_paa6", "sdmmc4_dat7_paa7"; nvidia,function = "sdmmc4"; - nvidia,pull = <2>; - nvidia,tristate = <0>; - nvidia,enable-input = <1>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; clk_32k_out_pa0 { nvidia,pins = "clk_32k_out_pa0"; nvidia,function = "blink"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - nvidia,enable-input = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; kb_col0_pq0 { nvidia,pins = "kb_col0_pq0", @@ -283,265 +314,265 @@ "kb_row1_pr1", "kb_row2_pr2"; nvidia,function = "kbc"; - nvidia,pull = <2>; - nvidia,tristate = <0>; - nvidia,enable-input = <1>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; dap3_din_pp1 { nvidia,pins = "dap3_din_pp1", "dap3_sclk_pp3"; nvidia,function = "displayb"; - nvidia,pull = <0>; - nvidia,tristate = <1>; - nvidia,enable-input = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; pv0 { nvidia,pins = "pv0"; nvidia,function = "rsvd4"; - nvidia,pull = <0>; - nvidia,tristate = <1>; - nvidia,enable-input = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; kb_row7_pr7 { nvidia,pins = "kb_row7_pr7"; nvidia,function = "rsvd2"; - nvidia,pull = <2>; - nvidia,tristate = <0>; - nvidia,enable-input = <1>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; kb_row10_ps2 { nvidia,pins = "kb_row10_ps2"; nvidia,function = "uarta"; - nvidia,pull = <0>; - nvidia,tristate = <1>; - nvidia,enable-input = <1>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; kb_row9_ps1 { nvidia,pins = "kb_row9_ps1"; nvidia,function = "uarta"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - nvidia,enable-input = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; pwr_i2c_scl_pz6 { nvidia,pins = "pwr_i2c_scl_pz6", "pwr_i2c_sda_pz7"; nvidia,function = "i2cpwr"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - nvidia,enable-input = <1>; - nvidia,lock = <0>; - nvidia,open-drain = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; }; sys_clk_req_pz5 { nvidia,pins = "sys_clk_req_pz5"; nvidia,function = "sysclk"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - nvidia,enable-input = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; core_pwr_req { nvidia,pins = "core_pwr_req"; nvidia,function = "pwron"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - nvidia,enable-input = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; cpu_pwr_req { nvidia,pins = "cpu_pwr_req"; nvidia,function = "cpu"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - nvidia,enable-input = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; pwr_int_n { nvidia,pins = "pwr_int_n"; nvidia,function = "pmi"; - nvidia,pull = <0>; - nvidia,tristate = <1>; - nvidia,enable-input = <1>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; reset_out_n { nvidia,pins = "reset_out_n"; nvidia,function = "reset_out_n"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - nvidia,enable-input = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; clk3_out_pee0 { nvidia,pins = "clk3_out_pee0"; nvidia,function = "extperiph3"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - nvidia,enable-input = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; gen1_i2c_scl_pc4 { nvidia,pins = "gen1_i2c_scl_pc4", "gen1_i2c_sda_pc5"; nvidia,function = "i2c1"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - nvidia,enable-input = <1>; - nvidia,lock = <0>; - nvidia,open-drain = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; }; uart2_cts_n_pj5 { nvidia,pins = "uart2_cts_n_pj5"; nvidia,function = "uartb"; - nvidia,pull = <0>; - nvidia,tristate = <1>; - nvidia,enable-input = <1>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; uart2_rts_n_pj6 { nvidia,pins = "uart2_rts_n_pj6"; nvidia,function = "uartb"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - nvidia,enable-input = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; uart2_rxd_pc3 { nvidia,pins = "uart2_rxd_pc3"; nvidia,function = "irda"; - nvidia,pull = <0>; - nvidia,tristate = <1>; - nvidia,enable-input = <1>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; uart2_txd_pc2 { nvidia,pins = "uart2_txd_pc2"; nvidia,function = "irda"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - nvidia,enable-input = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; uart3_cts_n_pa1 { nvidia,pins = "uart3_cts_n_pa1", "uart3_rxd_pw7"; nvidia,function = "uartc"; - nvidia,pull = <0>; - nvidia,tristate = <1>; - nvidia,enable-input = <1>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; uart3_rts_n_pc0 { nvidia,pins = "uart3_rts_n_pc0", "uart3_txd_pw6"; nvidia,function = "uartc"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - nvidia,enable-input = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; owr { nvidia,pins = "owr"; nvidia,function = "owr"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - nvidia,enable-input = <1>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; hdmi_cec_pee3 { nvidia,pins = "hdmi_cec_pee3"; nvidia,function = "cec"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - nvidia,enable-input = <1>; - nvidia,lock = <0>; - nvidia,open-drain = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; }; ddc_scl_pv4 { nvidia,pins = "ddc_scl_pv4", "ddc_sda_pv5"; nvidia,function = "i2c4"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - nvidia,enable-input = <1>; - nvidia,lock = <0>; - nvidia,rcv-sel = <1>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + nvidia,rcv-sel = <TEGRA_PIN_ENABLE>; }; spdif_in_pk6 { nvidia,pins = "spdif_in_pk6"; nvidia,function = "usb"; - nvidia,pull = <2>; - nvidia,tristate = <0>; - nvidia,enable-input = <1>; - nvidia,lock = <0>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; }; usb_vbus_en0_pn4 { nvidia,pins = "usb_vbus_en0_pn4"; nvidia,function = "usb"; - nvidia,pull = <2>; - nvidia,tristate = <0>; - nvidia,enable-input = <1>; - nvidia,lock = <0>; - nvidia,open-drain = <1>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; }; gpio_x6_aud_px6 { nvidia,pins = "gpio_x6_aud_px6"; nvidia,function = "spi6"; - nvidia,pull = <2>; - nvidia,tristate = <1>; - nvidia,enable-input = <1>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; gpio_x4_aud_px4 { nvidia,pins = "gpio_x4_aud_px4", "gpio_x7_aud_px7"; nvidia,function = "rsvd1"; - nvidia,pull = <1>; - nvidia,tristate = <0>; - nvidia,enable-input = <0>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; gpio_x5_aud_px5 { nvidia,pins = "gpio_x5_aud_px5"; nvidia,function = "rsvd1"; - nvidia,pull = <2>; - nvidia,tristate = <0>; - nvidia,enable-input = <1>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; gpio_w2_aud_pw2 { nvidia,pins = "gpio_w2_aud_pw2"; nvidia,function = "rsvd2"; - nvidia,pull = <2>; - nvidia,tristate = <0>; - nvidia,enable-input = <1>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; gpio_w3_aud_pw3 { nvidia,pins = "gpio_w3_aud_pw3"; nvidia,function = "spi6"; - nvidia,pull = <2>; - nvidia,tristate = <0>; - nvidia,enable-input = <1>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; gpio_x1_aud_px1 { nvidia,pins = "gpio_x1_aud_px1"; nvidia,function = "rsvd4"; - nvidia,pull = <1>; - nvidia,tristate = <0>; - nvidia,enable-input = <1>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; gpio_x3_aud_px3 { nvidia,pins = "gpio_x3_aud_px3"; nvidia,function = "rsvd4"; - nvidia,pull = <2>; - nvidia,tristate = <0>; - nvidia,enable-input = <1>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; dap3_fs_pp0 { nvidia,pins = "dap3_fs_pp0"; nvidia,function = "i2s2"; - nvidia,pull = <1>; - nvidia,tristate = <0>; - nvidia,enable-input = <0>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; dap3_dout_pp2 { nvidia,pins = "dap3_dout_pp2"; nvidia,function = "i2s2"; - nvidia,pull = <1>; - nvidia,tristate = <0>; - nvidia,enable-input = <0>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; pv1 { nvidia,pins = "pv1"; nvidia,function = "rsvd1"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - nvidia,enable-input = <1>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; pbb3 { nvidia,pins = "pbb3", @@ -549,25 +580,25 @@ "pbb6", "pbb7"; nvidia,function = "rsvd4"; - nvidia,pull = <1>; - nvidia,tristate = <0>; - nvidia,enable-input = <0>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; pcc1 { nvidia,pins = "pcc1", "pcc2"; nvidia,function = "rsvd4"; - nvidia,pull = <1>; - nvidia,tristate = <0>; - nvidia,enable-input = <1>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; gmi_ad0_pg0 { nvidia,pins = "gmi_ad0_pg0", "gmi_ad1_pg1"; nvidia,function = "gmi"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - nvidia,enable-input = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; gmi_ad10_ph2 { nvidia,pins = "gmi_ad10_ph2", @@ -576,17 +607,17 @@ "gmi_ad8_ph0", "gmi_clk_pk1"; nvidia,function = "gmi"; - nvidia,pull = <1>; - nvidia,tristate = <0>; - nvidia,enable-input = <0>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; gmi_ad2_pg2 { nvidia,pins = "gmi_ad2_pg2", "gmi_ad3_pg3"; nvidia,function = "gmi"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - nvidia,enable-input = <1>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; gmi_adv_n_pk0 { nvidia,pins = "gmi_adv_n_pk0", @@ -598,39 +629,39 @@ "gmi_iordy_pi5", "gmi_wp_n_pc7"; nvidia,function = "gmi"; - nvidia,pull = <2>; - nvidia,tristate = <0>; - nvidia,enable-input = <1>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; gmi_cs3_n_pk4 { nvidia,pins = "gmi_cs3_n_pk4"; nvidia,function = "gmi"; - nvidia,pull = <2>; - nvidia,tristate = <0>; - nvidia,enable-input = <0>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; clk2_req_pcc5 { nvidia,pins = "clk2_req_pcc5"; nvidia,function = "rsvd4"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - nvidia,enable-input = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; kb_col3_pq3 { nvidia,pins = "kb_col3_pq3", "kb_col6_pq6", "kb_col7_pq7"; nvidia,function = "kbc"; - nvidia,pull = <2>; - nvidia,tristate = <0>; - nvidia,enable-input = <0>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; kb_col5_pq5 { nvidia,pins = "kb_col5_pq5"; nvidia,function = "kbc"; - nvidia,pull = <2>; - nvidia,tristate = <0>; - nvidia,enable-input = <1>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; kb_row3_pr3 { nvidia,pins = "kb_row3_pr3", @@ -638,77 +669,77 @@ "kb_row6_pr6", "kb_row8_ps0"; nvidia,function = "kbc"; - nvidia,pull = <1>; - nvidia,tristate = <0>; - nvidia,enable-input = <1>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; clk3_req_pee1 { nvidia,pins = "clk3_req_pee1"; nvidia,function = "rsvd4"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - nvidia,enable-input = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; pu4 { nvidia,pins = "pu4"; nvidia,function = "displayb"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - nvidia,enable-input = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; pu5 { nvidia,pins = "pu5", "pu6"; nvidia,function = "displayb"; - nvidia,pull = <0>; - nvidia,tristate = <0>; - nvidia,enable-input = <1>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; hdmi_int_pn7 { nvidia,pins = "hdmi_int_pn7"; nvidia,function = "rsvd1"; - nvidia,pull = <1>; - nvidia,tristate = <0>; - nvidia,enable-input = <1>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; }; clk1_req_pee2 { nvidia,pins = "clk1_req_pee2", "usb_vbus_en1_pn5"; nvidia,function = "rsvd4"; - nvidia,pull = <1>; - nvidia,tristate = <1>; - nvidia,enable-input = <0>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; }; drive_sdio1 { nvidia,pins = "drive_sdio1"; - nvidia,high-speed-mode = <1>; - nvidia,schmitt = <0>; - nvidia,low-power-mode = <3>; + nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>; + nvidia,schmitt = <TEGRA_PIN_DISABLE>; + nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>; nvidia,pull-down-strength = <36>; nvidia,pull-up-strength = <20>; - nvidia,slew-rate-rising = <2>; - nvidia,slew-rate-falling = <2>; + nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOW>; + nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOW>; }; drive_sdio3 { nvidia,pins = "drive_sdio3"; - nvidia,high-speed-mode = <1>; - nvidia,schmitt = <0>; - nvidia,low-power-mode = <3>; + nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>; + nvidia,schmitt = <TEGRA_PIN_DISABLE>; + nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>; nvidia,pull-down-strength = <22>; nvidia,pull-up-strength = <36>; - nvidia,slew-rate-rising = <0>; - nvidia,slew-rate-falling = <0>; + nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>; + nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>; }; drive_gma { nvidia,pins = "drive_gma"; - nvidia,high-speed-mode = <1>; - nvidia,schmitt = <0>; - nvidia,low-power-mode = <3>; + nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>; + nvidia,schmitt = <TEGRA_PIN_DISABLE>; + nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>; nvidia,pull-down-strength = <2>; nvidia,pull-up-strength = <1>; - nvidia,slew-rate-rising = <0>; - nvidia,slew-rate-falling = <0>; + nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>; + nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>; nvidia,drive-type = <1>; }; }; @@ -718,11 +749,15 @@ status = "okay"; }; + pwm@7000a000 { + status = "okay"; + }; + i2c@7000c000 { status = "okay"; clock-frequency = <100000>; - battery: smart-battery { + battery: smart-battery@b { compatible = "ti,bq20z45", "sbs,sbs-battery"; reg = <0xb>; battery-name = "battery"; @@ -731,7 +766,7 @@ power-supplies = <&charger>; }; - rt5640: rt5640 { + rt5640: rt5640@1c { compatible = "realtek,rt5640"; reg = <0x1c>; interrupt-parent = <&gpio>; @@ -749,11 +784,15 @@ }; }; + hdmi_ddc: i2c@7000c700 { + status = "okay"; + }; + i2c@7000d000 { status = "okay"; clock-frequency = <400000>; - tps51632 { + tps51632@43 { compatible = "ti,tps51632"; reg = <0x43>; regulator-name = "vdd-cpu"; @@ -763,7 +802,7 @@ regulator-always-on; }; - tps65090 { + tps65090@48 { compatible = "ti,tps65090"; reg = <0x48>; interrupt-parent = <&gpio>; @@ -806,7 +845,7 @@ regulator-boot-on; }; - fet1 { + vdd_bl_reg: fet1 { regulator-name = "vdd-lcd-bl"; }; @@ -814,7 +853,7 @@ regulator-name = "vdd-modem-3v3"; }; - fet4 { + avdd_lcd_reg: fet4 { regulator-name = "avdd-lcd"; }; @@ -846,7 +885,7 @@ }; }; - palmas: tps65913 { + palmas: tps65913@58 { compatible = "ti,palmas"; reg = <0x58>; interrupts = <0 86 IRQ_TYPE_LEVEL_LOW>; @@ -1046,7 +1085,7 @@ }; }; - pmc { + pmc@7000e400 { nvidia,invert-interrupt; nvidia,suspend-mode = <1>; nvidia,cpu-pwr-good-time = <500>; @@ -1057,7 +1096,7 @@ nvidia,sys-clock-req-active-high; }; - ahub { + ahub@70080000 { i2s@70080400 { status = "okay"; }; @@ -1084,12 +1123,23 @@ vbus-supply = <&usb3_vbus_reg>; }; + backlight: backlight { + compatible = "pwm-backlight"; + + enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>; + power-supply = <&vdd_bl_reg>; + pwms = <&pwm 1 1000000>; + + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + }; + clocks { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <0>; - clk32k_in: clock { + clk32k_in: clock@0 { compatible = "fixed-clock"; reg=<0>; #clock-cells = <0>; @@ -1150,16 +1200,6 @@ gpio = <&gpio TEGRA_GPIO(H, 5) GPIO_ACTIVE_HIGH>; }; - lcd_bl_en_reg: regulator@2 { - compatible = "regulator-fixed"; - reg = <2>; - regulator-name = "lcd_bl_en"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; - enable-active-high; - gpio = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>; - }; - usb1_vbus_reg: regulator@3 { compatible = "regulator-fixed"; reg = <3>; diff --git a/arch/arm/boot/dts/tegra114.dtsi b/arch/arm/boot/dts/tegra114.dtsi index 731249f..389e987 100644 --- a/arch/arm/boot/dts/tegra114.dtsi +++ b/arch/arm/boot/dts/tegra114.dtsi @@ -1,5 +1,6 @@ #include <dt-bindings/clock/tegra114-car.h> #include <dt-bindings/gpio/tegra-gpio.h> +#include <dt-bindings/pinctrl/pinctrl-tegra.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include "skeleton.dtsi" @@ -15,7 +16,113 @@ serial3 = &uartd; }; - gic: interrupt-controller { + host1x@50000000 { + compatible = "nvidia,tegra114-host1x", "simple-bus"; + reg = <0x50000000 0x00028000>; + interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, /* syncpt */ + <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>; /* general */ + clocks = <&tegra_car TEGRA114_CLK_HOST1X>; + resets = <&tegra_car 28>; + reset-names = "host1x"; + + #address-cells = <1>; + #size-cells = <1>; + + ranges = <0x54000000 0x54000000 0x01000000>; + + gr2d@54140000 { + compatible = "nvidia,tegra114-gr2d", "nvidia,tegra20-gr2d"; + reg = <0x54140000 0x00040000>; + interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA114_CLK_GR2D>; + resets = <&tegra_car 21>; + reset-names = "2d"; + }; + + gr3d@54180000 { + compatible = "nvidia,tegra114-gr3d", "nvidia,tegra20-gr3d"; + reg = <0x54180000 0x00040000>; + clocks = <&tegra_car TEGRA114_CLK_GR3D>; + resets = <&tegra_car 24>; + reset-names = "3d"; + }; + + dc@54200000 { + compatible = "nvidia,tegra114-dc", "nvidia,tegra20-dc"; + reg = <0x54200000 0x00040000>; + interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA114_CLK_DISP1>, + <&tegra_car TEGRA114_CLK_PLL_P>; + clock-names = "dc", "parent"; + resets = <&tegra_car 27>; + reset-names = "dc"; + + rgb { + status = "disabled"; + }; + }; + + dc@54240000 { + compatible = "nvidia,tegra114-dc", "nvidia,tegra20-dc"; + reg = <0x54240000 0x00040000>; + interrupts = <GIC_SPI 74 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA114_CLK_DISP2>, + <&tegra_car TEGRA114_CLK_PLL_P>; + clock-names = "dc", "parent"; + resets = <&tegra_car 26>; + reset-names = "dc"; + + rgb { + status = "disabled"; + }; + }; + + hdmi@54280000 { + compatible = "nvidia,tegra114-hdmi"; + reg = <0x54280000 0x00040000>; + interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA114_CLK_HDMI>, + <&tegra_car TEGRA114_CLK_PLL_D2_OUT0>; + clock-names = "hdmi", "parent"; + resets = <&tegra_car 51>; + reset-names = "hdmi"; + status = "disabled"; + }; + + dsi@54300000 { + compatible = "nvidia,tegra114-dsi"; + reg = <0x54300000 0x00040000>; + clocks = <&tegra_car TEGRA114_CLK_DSIA>, + <&tegra_car TEGRA114_CLK_DSIALP>, + <&tegra_car TEGRA114_CLK_PLL_D_OUT0>; + clock-names = "dsi", "lp", "parent"; + resets = <&tegra_car 48>; + reset-names = "dsi"; + nvidia,mipi-calibrate = <&mipi 0x060>; /* DSIA & DSIB pads */ + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + }; + + dsi@54400000 { + compatible = "nvidia,tegra114-dsi"; + reg = <0x54400000 0x00040000>; + clocks = <&tegra_car TEGRA114_CLK_DSIB>, + <&tegra_car TEGRA114_CLK_DSIBLP>, + <&tegra_car TEGRA114_CLK_PLL_D2_OUT0>; + clock-names = "dsi", "lp", "parent"; + resets = <&tegra_car 82>; + reset-names = "dsi"; + nvidia,mipi-calibrate = <&mipi 0x180>; /* DSIC & DSID pads */ + status = "disabled"; + + #address-cells = <1>; + #size-cells = <0>; + }; + }; + + gic: interrupt-controller@50041000 { compatible = "arm,cortex-a15-gic"; #interrupt-cells = <3>; interrupt-controller; @@ -39,14 +146,14 @@ clocks = <&tegra_car TEGRA114_CLK_TIMER>; }; - tegra_car: clock { + tegra_car: clock@60006000 { compatible = "nvidia,tegra114-car"; reg = <0x60006000 0x1000>; #clock-cells = <1>; #reset-cells = <1>; }; - apbdma: dma { + apbdma: dma@6000a000 { compatible = "nvidia,tegra114-apbdma"; reg = <0x6000a000 0x1400>; interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, @@ -87,12 +194,12 @@ #dma-cells = <1>; }; - ahb: ahb { + ahb: ahb@6000c004 { compatible = "nvidia,tegra114-ahb", "nvidia,tegra30-ahb"; reg = <0x6000c004 0x14c>; }; - gpio: gpio { + gpio: gpio@6000d000 { compatible = "nvidia,tegra114-gpio", "nvidia,tegra30-gpio"; reg = <0x6000d000 0x1000>; interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, @@ -109,7 +216,7 @@ interrupt-controller; }; - pinmux: pinmux { + pinmux: pinmux@70000868 { compatible = "nvidia,tegra114-pinmux"; reg = <0x70000868 0x148 /* Pad control registers */ 0x70003000 0x40c>; /* Mux registers */ @@ -175,7 +282,7 @@ status = "disabled"; }; - pwm: pwm { + pwm: pwm@7000a000 { compatible = "nvidia,tegra114-pwm", "nvidia,tegra20-pwm"; reg = <0x7000a000 0x100>; #pwm-cells = <2>; @@ -350,14 +457,14 @@ status = "disabled"; }; - rtc { + rtc@7000e000 { compatible = "nvidia,tegra114-rtc", "nvidia,tegra20-rtc"; reg = <0x7000e000 0x100>; interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; clocks = <&tegra_car TEGRA114_CLK_RTC>; }; - kbc { + kbc@7000e200 { compatible = "nvidia,tegra114-kbc"; reg = <0x7000e200 0x100>; interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; @@ -367,14 +474,14 @@ status = "disabled"; }; - pmc { + pmc@7000e400 { compatible = "nvidia,tegra114-pmc"; reg = <0x7000e400 0x400>; clocks = <&tegra_car TEGRA114_CLK_PCLK>, <&clk32k_in>; clock-names = "pclk", "clk32k_in"; }; - iommu { + iommu@70019010 { compatible = "nvidia,tegra114-smmu", "nvidia,tegra30-smmu"; reg = <0x70019010 0x02c 0x700191f0 0x010 @@ -385,7 +492,7 @@ nvidia,ahb = <&ahb>; }; - ahub { + ahub@70080000 { compatible = "nvidia,tegra114-ahub"; reg = <0x70080000 0x200>, <0x70080200 0x100>, @@ -479,6 +586,13 @@ }; }; + mipi: mipi@700e3000 { + compatible = "nvidia,tegra114-mipi"; + reg = <0x700e3000 0x100>; + clocks = <&tegra_car TEGRA114_CLK_MIPI_CAL>; + #nvidia,mipi-calibrate-cells = <1>; + }; + sdhci@78000000 { compatible = "nvidia,tegra114-sdhci", "nvidia,tegra30-sdhci"; reg = <0x78000000 0x200>; diff --git a/arch/arm/boot/dts/tegra124-venice2.dts b/arch/arm/boot/dts/tegra124-venice2.dts index 431d67a..c6dcef5 100644 --- a/arch/arm/boot/dts/tegra124-venice2.dts +++ b/arch/arm/boot/dts/tegra124-venice2.dts @@ -1,19 +1,917 @@ /dts-v1/; +#include <dt-bindings/input/input.h> #include "tegra124.dtsi" / { model = "NVIDIA Tegra124 Venice2"; compatible = "nvidia,venice2", "nvidia,tegra124"; + aliases { + rtc0 = "/i2c@7000d000/as3722@40"; + rtc1 = "/rtc@7000e000"; + }; + memory { reg = <0x80000000 0x80000000>; }; + pinmux: pinmux@70000868 { + pinctrl-names = "default"; + pinctrl-0 = <&pinmux_default>; + + pinmux_default: common { + dap_mclk1_pw4 { + nvidia,pins = "dap_mclk1_pw4"; + nvidia,function = "extperiph1"; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + dap1_din_pn1 { + nvidia,pins = "dap1_din_pn1"; + nvidia,function = "i2s0"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + }; + dap1_dout_pn2 { + nvidia,pins = "dap1_dout_pn2", + "dap1_fs_pn0", + "dap1_sclk_pn3"; + nvidia,function = "i2s0"; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + }; + dap2_din_pa4 { + nvidia,pins = "dap2_din_pa4"; + nvidia,function = "i2s1"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + dap2_dout_pa5 { + nvidia,pins = "dap2_dout_pa5", + "dap2_fs_pa2", + "dap2_sclk_pa3"; + nvidia,function = "i2s1"; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + dvfs_pwm_px0 { + nvidia,pins = "dvfs_pwm_px0", + "dvfs_clk_px2"; + nvidia,function = "cldvfs"; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + ulpi_clk_py0 { + nvidia,pins = "ulpi_clk_py0", + "ulpi_nxt_py2", + "ulpi_stp_py3"; + nvidia,function = "spi1"; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + ulpi_dir_py1 { + nvidia,pins = "ulpi_dir_py1"; + nvidia,function = "spi1"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + cam_i2c_scl_pbb1 { + nvidia,pins = "cam_i2c_scl_pbb1", + "cam_i2c_sda_pbb2"; + nvidia,function = "i2c3"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + gen2_i2c_scl_pt5 { + nvidia,pins = "gen2_i2c_scl_pt5", + "gen2_i2c_sda_pt6"; + nvidia,function = "i2c2"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + pg4 { + nvidia,pins = "pg4", + "pg5", + "pg6", + "pi3"; + nvidia,function = "spi4"; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + pg7 { + nvidia,pins = "pg7"; + nvidia,function = "spi4"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + ph1 { + nvidia,pins = "ph1"; + nvidia,function = "pwm1"; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + pk0 { + nvidia,pins = "pk0", + "kb_row15_ps7", + "clk_32k_out_pa0"; + nvidia,function = "soc"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sdmmc1_clk_pz0 { + nvidia,pins = "sdmmc1_clk_pz0", + "sdmmc1_cmd_pz1", + "sdmmc1_dat0_py7", + "sdmmc1_dat1_py6", + "sdmmc1_dat2_py5", + "sdmmc1_dat3_py4"; + nvidia,function = "sdmmc1"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + sdmmc1_cmd_pz1 { + nvidia,pins = "sdmmc1_cmd_pz1", + "sdmmc1_dat0_py7", + "sdmmc1_dat1_py6", + "sdmmc1_dat2_py5", + "sdmmc1_dat3_py4"; + nvidia,function = "sdmmc1"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + sdmmc3_clk_pa6 { + nvidia,pins = "sdmmc3_clk_pa6"; + nvidia,function = "sdmmc3"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + sdmmc3_cmd_pa7 { + nvidia,pins = "sdmmc3_cmd_pa7", + "sdmmc3_dat0_pb7", + "sdmmc3_dat1_pb6", + "sdmmc3_dat2_pb5", + "sdmmc3_dat3_pb4", + "sdmmc3_clk_lb_out_pee4", + "sdmmc3_clk_lb_in_pee5"; + nvidia,function = "sdmmc3"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + sdmmc4_clk_pcc4 { + nvidia,pins = "sdmmc4_clk_pcc4"; + nvidia,function = "sdmmc4"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + sdmmc4_cmd_pt7 { + nvidia,pins = "sdmmc4_cmd_pt7", + "sdmmc4_dat0_paa0", + "sdmmc4_dat1_paa1", + "sdmmc4_dat2_paa2", + "sdmmc4_dat3_paa3", + "sdmmc4_dat4_paa4", + "sdmmc4_dat5_paa5", + "sdmmc4_dat6_paa6", + "sdmmc4_dat7_paa7"; + nvidia,function = "sdmmc4"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + pwr_i2c_scl_pz6 { + nvidia,pins = "pwr_i2c_scl_pz6", + "pwr_i2c_sda_pz7"; + nvidia,function = "i2cpwr"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + jtag_rtck { + nvidia,pins = "jtag_rtck"; + nvidia,function = "rtck"; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + clk_32k_in { + nvidia,pins = "clk_32k_in"; + nvidia,function = "clk"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + core_pwr_req { + nvidia,pins = "core_pwr_req"; + nvidia,function = "pwron"; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + cpu_pwr_req { + nvidia,pins = "cpu_pwr_req"; + nvidia,function = "cpu"; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + pwr_int_n { + nvidia,pins = "pwr_int_n"; + nvidia,function = "pmi"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + reset_out_n { + nvidia,pins = "reset_out_n"; + nvidia,function = "reset_out_n"; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + clk3_out_pee0 { + nvidia,pins = "clk3_out_pee0"; + nvidia,function = "extperiph3"; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + dap4_din_pp5 { + nvidia,pins = "dap4_din_pp5"; + nvidia,function = "i2s3"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + }; + dap4_dout_pp6 { + nvidia,pins = "dap4_dout_pp6", + "dap4_fs_pp4", + "dap4_sclk_pp7"; + nvidia,function = "i2s3"; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + }; + gen1_i2c_sda_pc5 { + nvidia,pins = "gen1_i2c_sda_pc5", + "gen1_i2c_scl_pc4"; + nvidia,function = "i2c1"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + uart2_cts_n_pj5 { + nvidia,pins = "uart2_cts_n_pj5"; + nvidia,function = "uartb"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + uart2_rts_n_pj6 { + nvidia,pins = "uart2_rts_n_pj6"; + nvidia,function = "uartb"; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + uart2_rxd_pc3 { + nvidia,pins = "uart2_rxd_pc3"; + nvidia,function = "irda"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + uart2_txd_pc2 { + nvidia,pins = "uart2_txd_pc2"; + nvidia,function = "irda"; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + uart3_cts_n_pa1 { + nvidia,pins = "uart3_cts_n_pa1", + "uart3_rxd_pw7"; + nvidia,function = "uartc"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + uart3_rts_n_pc0 { + nvidia,pins = "uart3_rts_n_pc0", + "uart3_txd_pw6"; + nvidia,function = "uartc"; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + hdmi_cec_pee3 { + nvidia,pins = "hdmi_cec_pee3"; + nvidia,function = "cec"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_DISABLE>; + }; + hdmi_int_pn7 { + nvidia,pins = "hdmi_int_pn7"; + nvidia,function = "rsvd1"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + }; + ddc_scl_pv4 { + nvidia,pins = "ddc_scl_pv4", + "ddc_sda_pv5"; + nvidia,function = "i2c4"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + nvidia,rcv-sel = <TEGRA_PIN_ENABLE>; + }; + pj7 { + nvidia,pins = "pj7", + "pk7"; + nvidia,function = "uartd"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + pb0 { + nvidia,pins = "pb0", + "pb1"; + nvidia,function = "uartd"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + ph0 { + nvidia,pins = "ph0"; + nvidia,function = "pwm0"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row10_ps2 { + nvidia,pins = "kb_row10_ps2"; + nvidia,function = "uarta"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_row9_ps1 { + nvidia,pins = "kb_row9_ps1"; + nvidia,function = "uarta"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + kb_row6_pr6 { + nvidia,pins = "kb_row6_pr6"; + nvidia,function = "displaya_alt"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + usb_vbus_en0_pn4 { + nvidia,pins = "usb_vbus_en0_pn4"; + nvidia,function = "usb"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + usb_vbus_en1_pn5 { + nvidia,pins = "usb_vbus_en1_pn5"; + nvidia,function = "usb"; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,lock = <TEGRA_PIN_DISABLE>; + nvidia,open-drain = <TEGRA_PIN_ENABLE>; + }; + drive_sdio1 { + nvidia,pins = "drive_sdio1"; + nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>; + nvidia,schmitt = <TEGRA_PIN_DISABLE>; + nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>; + nvidia,pull-down-strength = <32>; + nvidia,pull-up-strength = <42>; + nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>; + nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>; + }; + drive_sdio3 { + nvidia,pins = "drive_sdio3"; + nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>; + nvidia,schmitt = <TEGRA_PIN_DISABLE>; + nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>; + nvidia,pull-down-strength = <20>; + nvidia,pull-up-strength = <36>; + nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>; + nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>; + }; + drive_gma { + nvidia,pins = "drive_gma"; + nvidia,high-speed-mode = <TEGRA_PIN_ENABLE>; + nvidia,schmitt = <TEGRA_PIN_DISABLE>; + nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>; + nvidia,pull-down-strength = <1>; + nvidia,pull-up-strength = <2>; + nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>; + nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>; + nvidia,drive-type = <1>; + }; + als_irq_l { + nvidia,pins = "gpio_x3_aud_px3"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + codec_irq_l { + nvidia,pins = "ph4"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + lcd_bl_en { + nvidia,pins = "ph2"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + touch_irq_l { + nvidia,pins = "gpio_w3_aud_pw3"; + nvidia,function = "spi6"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + tpm_davint_l { + nvidia,pins = "ph6"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + ts_irq_l { + nvidia,pins = "pk2"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + ts_reset_l { + nvidia,pins = "pk4"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ts_shdn_l { + nvidia,pins = "pk1"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ph7 { + nvidia,pins = "ph7"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + kb_col0_ap { + nvidia,pins = "kb_col0_pq0"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + lid_open { + nvidia,pins = "kb_row4_pr4"; + nvidia,function = "rsvd3"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + en_vdd_sd { + nvidia,pins = "kb_row0_pr0"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + ac_ok { + nvidia,pins = "pj0"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + sensor_irq_l { + nvidia,pins = "pi6"; + nvidia,function = "gmi"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + wifi_en { + nvidia,pins = "gpio_x7_aud_px7"; + nvidia,function = "rsvd4"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_DISABLE>; + }; + wifi_rst_l { + nvidia,pins = "clk2_req_pcc5"; + nvidia,function = "dap"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + hp_det_l { + nvidia,pins = "ulpi_data1_po2"; + nvidia,function = "spi3"; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; + nvidia,enable-input = <TEGRA_PIN_ENABLE>; + }; + }; + }; + serial@70006000 { status = "okay"; }; + pwm: pwm@7000a000 { + status = "okay"; + }; + + i2c@7000c000 { + status = "okay"; + clock-frequency = <100000>; + + acodec: audio-codec@10 { + compatible = "maxim,max98090"; + reg = <0x10>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(H, 4) GPIO_ACTIVE_HIGH>; + }; + }; + + i2c@7000c400 { + status = "okay"; + clock-frequency = <100000>; + }; + + i2c@7000c500 { + status = "okay"; + clock-frequency = <100000>; + }; + + i2c@7000c700 { + status = "okay"; + clock-frequency = <100000>; + }; + + i2c@7000d000 { + status = "okay"; + clock-frequency = <400000>; + + as3722: as3722@40 { + compatible = "ams,as3722"; + reg = <0x40>; + interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>; + + #interrupt-cells = <2>; + interrupt-controller; + + gpio-controller; + #gpio-cells = <2>; + + pinctrl-names = "default"; + pinctrl-0 = <&as3722_default>; + + as3722_default: pinmux { + gpio0 { + pins = "gpio0"; + function = "gpio"; + bias-pull-down; + }; + + gpio1_2_4_7 { + pins = "gpio1", "gpio2", "gpio4", "gpio7"; + function = "gpio"; + bias-pull-up; + }; + + gpio3_6 { + pins = "gpio3", "gpio6"; + bias-high-impedance; + }; + + gpio5 { + pins = "gpio5"; + function = "clk32k-out"; + }; + }; + + regulators { + vsup-sd2-supply = <&vdd_ac_bat_reg>; + vsup-sd3-supply = <&vdd_ac_bat_reg>; + vsup-sd4-supply = <&vdd_ac_bat_reg>; + vsup-sd5-supply = <&vdd_ac_bat_reg>; + vin-ldo0-supply = <&as3722_sd2>; + vin-ldo1-6-supply = <&vdd_ac_bat_reg>; + vin-ldo2-5-7-supply = <&as3722_sd5>; + vin-ldo3-4-supply = <&vdd_ac_bat_reg>; + vin-ldo9-10-supply = <&vdd_ac_bat_reg>; + vin-ldo11-supply = <&vdd_ac_bat_reg>; + + sd0 { + regulator-name = "vdd-cpu"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1400000>; + regulator-min-microamp = <3500000>; + regulator-max-microamp = <3500000>; + regulator-always-on; + regulator-boot-on; + ams,external-control = <2>; + }; + + sd1 { + regulator-name = "vdd-core"; + regulator-min-microvolt = <700000>; + regulator-max-microvolt = <1350000>; + regulator-min-microamp = <2500000>; + regulator-max-microamp = <2500000>; + regulator-always-on; + regulator-boot-on; + ams,external-control = <1>; + }; + + as3722_sd2: sd2 { + regulator-name = "vddio-ddr"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + + sd3 { + regulator-name = "vddio-ddr-2phase"; + regulator-min-microvolt = <1350000>; + regulator-max-microvolt = <1350000>; + regulator-always-on; + regulator-boot-on; + }; + + sd4 { + regulator-name = "avdd-pex-sata"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + regulator-boot-on; + regulator-always-on; + }; + + as3722_sd5: sd5 { + regulator-name = "vddio-sys"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-boot-on; + regulator-always-on; + }; + + sd6 { + regulator-name = "vdd-gpu"; + regulator-min-microvolt = <650000>; + regulator-max-microvolt = <1200000>; + regulator-min-microamp = <3500000>; + regulator-max-microamp = <3500000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo0 { + regulator-name = "avdd_pll"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + regulator-boot-on; + regulator-always-on; + ams,external-control = <1>; + }; + + ldo1 { + regulator-name = "run-cam-1.8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + + ldo2 { + regulator-name = "gen-avdd,vddio-hsic"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo3 { + regulator-name = "vdd-rtc"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-boot-on; + regulator-always-on; + ams,enable-tracking; + }; + + ldo4 { + regulator-name = "vdd-cam"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo5 { + regulator-name = "vdd-cam-front"; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; + }; + + ldo6 { + regulator-name = "vddio-sdmmc3"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + regulator-always-on; + }; + + ldo7 { + regulator-name = "vdd-cam-rear"; + regulator-min-microvolt = <1050000>; + regulator-max-microvolt = <1050000>; + }; + + ldo9 { + regulator-name = "vdd-touch"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo10 { + regulator-name = "vdd-cam-af"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + }; + + ldo11 { + regulator-name = "vpp-fuse"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + }; + }; + }; + + spi@7000d400 { + status = "okay"; + + cros-ec@0 { + compatible = "google,cros-ec-spi"; + spi-max-frequency = <4000000>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(C, 7) IRQ_TYPE_LEVEL_LOW>; + reg = <0>; + + google,cros-ec-spi-msg-delay = <2000>; + + cros-ec-keyb { + compatible = "google,cros-ec-keyb"; + keypad,num-rows = <8>; + keypad,num-columns = <13>; + google,needs-ghost-filter; + + linux,keymap = < + MATRIX_KEY(0x00, 0x01, KEY_LEFTMETA) + MATRIX_KEY(0x00, 0x02, KEY_F1) + MATRIX_KEY(0x00, 0x03, KEY_B) + MATRIX_KEY(0x00, 0x04, KEY_F10) + MATRIX_KEY(0x00, 0x06, KEY_N) + MATRIX_KEY(0x00, 0x08, KEY_EQUAL) + MATRIX_KEY(0x00, 0x0a, KEY_RIGHTALT) + + MATRIX_KEY(0x01, 0x01, KEY_ESC) + MATRIX_KEY(0x01, 0x02, KEY_F4) + MATRIX_KEY(0x01, 0x03, KEY_G) + MATRIX_KEY(0x01, 0x04, KEY_F7) + MATRIX_KEY(0x01, 0x06, KEY_H) + MATRIX_KEY(0x01, 0x08, KEY_APOSTROPHE) + MATRIX_KEY(0x01, 0x09, KEY_F9) + MATRIX_KEY(0x01, 0x0b, KEY_BACKSPACE) + + MATRIX_KEY(0x02, 0x00, KEY_LEFTCTRL) + MATRIX_KEY(0x02, 0x01, KEY_TAB) + MATRIX_KEY(0x02, 0x02, KEY_F3) + MATRIX_KEY(0x02, 0x03, KEY_T) + MATRIX_KEY(0x02, 0x04, KEY_F6) + MATRIX_KEY(0x02, 0x05, KEY_RIGHTBRACE) + MATRIX_KEY(0x02, 0x06, KEY_Y) + MATRIX_KEY(0x02, 0x07, KEY_102ND) + MATRIX_KEY(0x02, 0x08, KEY_LEFTBRACE) + MATRIX_KEY(0x02, 0x09, KEY_F8) + + MATRIX_KEY(0x03, 0x01, KEY_GRAVE) + MATRIX_KEY(0x03, 0x02, KEY_F2) + MATRIX_KEY(0x03, 0x03, KEY_5) + MATRIX_KEY(0x03, 0x04, KEY_F5) + MATRIX_KEY(0x03, 0x06, KEY_6) + MATRIX_KEY(0x03, 0x08, KEY_MINUS) + MATRIX_KEY(0x03, 0x0b, KEY_BACKSLASH) + + MATRIX_KEY(0x04, 0x00, KEY_RIGHTCTRL) + MATRIX_KEY(0x04, 0x01, KEY_A) + MATRIX_KEY(0x04, 0x02, KEY_D) + MATRIX_KEY(0x04, 0x03, KEY_F) + MATRIX_KEY(0x04, 0x04, KEY_S) + MATRIX_KEY(0x04, 0x05, KEY_K) + MATRIX_KEY(0x04, 0x06, KEY_J) + MATRIX_KEY(0x04, 0x08, KEY_SEMICOLON) + MATRIX_KEY(0x04, 0x09, KEY_L) + MATRIX_KEY(0x04, 0x0a, KEY_BACKSLASH) + MATRIX_KEY(0x04, 0x0b, KEY_ENTER) + + MATRIX_KEY(0x05, 0x01, KEY_Z) + MATRIX_KEY(0x05, 0x02, KEY_C) + MATRIX_KEY(0x05, 0x03, KEY_V) + MATRIX_KEY(0x05, 0x04, KEY_X) + MATRIX_KEY(0x05, 0x05, KEY_COMMA) + MATRIX_KEY(0x05, 0x06, KEY_M) + MATRIX_KEY(0x05, 0x07, KEY_LEFTSHIFT) + MATRIX_KEY(0x05, 0x08, KEY_SLASH) + MATRIX_KEY(0x05, 0x09, KEY_DOT) + MATRIX_KEY(0x05, 0x0b, KEY_SPACE) + + MATRIX_KEY(0x06, 0x01, KEY_1) + MATRIX_KEY(0x06, 0x02, KEY_3) + MATRIX_KEY(0x06, 0x03, KEY_4) + MATRIX_KEY(0x06, 0x04, KEY_2) + MATRIX_KEY(0x06, 0x05, KEY_8) + MATRIX_KEY(0x06, 0x06, KEY_7) + MATRIX_KEY(0x06, 0x08, KEY_0) + MATRIX_KEY(0x06, 0x09, KEY_9) + MATRIX_KEY(0x06, 0x0a, KEY_LEFTALT) + MATRIX_KEY(0x06, 0x0b, KEY_DOWN) + MATRIX_KEY(0x06, 0x0c, KEY_RIGHT) + + MATRIX_KEY(0x07, 0x01, KEY_Q) + MATRIX_KEY(0x07, 0x02, KEY_E) + MATRIX_KEY(0x07, 0x03, KEY_R) + MATRIX_KEY(0x07, 0x04, KEY_W) + MATRIX_KEY(0x07, 0x05, KEY_I) + MATRIX_KEY(0x07, 0x06, KEY_U) + MATRIX_KEY(0x07, 0x07, KEY_RIGHTSHIFT) + MATRIX_KEY(0x07, 0x08, KEY_P) + MATRIX_KEY(0x07, 0x09, KEY_O) + MATRIX_KEY(0x07, 0x0b, KEY_UP) + MATRIX_KEY(0x07, 0x0c, KEY_LEFT) + >; + }; + }; + }; + pmc@7000e400 { nvidia,invert-interrupt; nvidia,suspend-mode = <1>; @@ -24,4 +922,170 @@ nvidia,core-power-req-active-high; nvidia,sys-clock-req-active-high; }; + + sdhci@700b0400 { + cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_HIGH>; + power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>; + status = "okay"; + bus-width = <4>; + }; + + sdhci@700b0600 { + status = "okay"; + bus-width = <8>; + }; + + ahub@70300000 { + i2s@70301100 { + status = "okay"; + }; + }; + + clocks { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + clk32k_in: clock@0 { + compatible = "fixed-clock"; + reg=<0>; + #clock-cells = <0>; + clock-frequency = <32768>; + }; + }; + + gpio-keys { + compatible = "gpio-keys"; + + power { + label = "Power"; + gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>; + linux,code = <KEY_POWER>; + debounce-interval = <10>; + gpio-key,wakeup; + }; + }; + + regulators { + compatible = "simple-bus"; + #address-cells = <1>; + #size-cells = <0>; + + vdd_ac_bat_reg: regulator@0 { + compatible = "regulator-fixed"; + reg = <0>; + regulator-name = "vdd_ac_bat"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + vdd_3v3_reg: regulator@1 { + compatible = "regulator-fixed"; + reg = <1>; + regulator-name = "vdd_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + enable-active-high; + gpio = <&as3722 1 GPIO_ACTIVE_HIGH>; + }; + + vdd_3v3_modem_reg: regulator@2 { + compatible = "regulator-fixed"; + reg = <2>; + regulator-name = "vdd-modem-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&as3722 2 GPIO_ACTIVE_HIGH>; + }; + + vdd_hdmi_5v0_reg: regulator@3 { + compatible = "regulator-fixed"; + reg = <3>; + regulator-name = "vdd-hdmi-5v0"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>; + }; + + vdd_bl_reg: regulator@4 { + compatible = "regulator-fixed"; + reg = <4>; + regulator-name = "vdd-bl"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_LOW>; + }; + + vdd_ts_sw_5v0: regulator@5 { + compatible = "regulator-fixed"; + reg = <5>; + regulator-name = "vdd_ts_sw"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + regulator-boot-on; + gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_LOW>; + }; + + usb1_vbus_reg: regulator@6 { + compatible = "regulator-fixed"; + reg = <6>; + regulator-name = "usb1_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + enable-active-high; + gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>; + gpio-open-drain; + }; + + usb3_vbus_reg: regulator@7 { + compatible = "regulator-fixed"; + reg = <7>; + regulator-name = "usb3_vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-boot-on; + enable-active-high; + gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>; + gpio-open-drain; + }; + + panel_3v3_reg: regulator@8 { + compatible = "regulator-fixed"; + reg = <8>; + regulator-name = "panel_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + enable-active-high; + gpio = <&as3722 4 GPIO_ACTIVE_HIGH>; + }; + }; + + sound { + compatible = "nvidia,tegra-audio-max98090-venice2", + "nvidia,tegra-audio-max98090"; + nvidia,model = "NVIDIA Tegra Venice2"; + + nvidia,audio-routing = + "Headphones", "HPR", + "Headphones", "HPL", + "Speakers", "SPKR", + "Speakers", "SPKL", + "Mic Jack", "MICBIAS", + "IN34", "Mic Jack"; + + nvidia,i2s-controller = <&tegra_i2s1>; + nvidia,audio-codec = <&acodec>; + + clocks = <&tegra_car TEGRA124_CLK_PLL_A>, + <&tegra_car TEGRA124_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA124_CLK_EXTERN1>; + clock-names = "pll_a", "pll_a_out0", "mclk"; + }; }; diff --git a/arch/arm/boot/dts/tegra124.dtsi b/arch/arm/boot/dts/tegra124.dtsi index b741300..ec0698a 100644 --- a/arch/arm/boot/dts/tegra124.dtsi +++ b/arch/arm/boot/dts/tegra124.dtsi @@ -1,4 +1,6 @@ +#include <dt-bindings/clock/tegra124-car.h> #include <dt-bindings/gpio/tegra-gpio.h> +#include <dt-bindings/pinctrl/pinctrl-tegra.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include "skeleton.dtsi" @@ -28,6 +30,14 @@ <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 122 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA124_CLK_TIMER>; + }; + + tegra_car: clock@60006000 { + compatible = "nvidia,tegra124-car"; + reg = <0x60006000 0x1000>; + #clock-cells = <1>; + #reset-cells = <1>; }; gpio: gpio@6000d000 { @@ -47,6 +57,53 @@ interrupt-controller; }; + apbdma: dma@60020000 { + compatible = "nvidia,tegra124-apbdma", "nvidia,tegra148-apbdma"; + reg = <0x60020000 0x1400>; + interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 109 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 110 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 114 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 119 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA124_CLK_APBDMA>; + resets = <&tegra_car 34>; + reset-names = "dma"; + #dma-cells = <1>; + }; + + pinmux: pinmux@70000868 { + compatible = "nvidia,tegra124-pinmux"; + reg = <0x70000868 0x164>, /* Pad control registers */ + <0x70003000 0x434>; /* Mux registers */ + }; + /* * There are two serial driver i.e. 8250 based simple serial * driver and APB DMA based serial driver for higher baudrate @@ -60,6 +117,11 @@ reg = <0x70006000 0x40>; reg-shift = <2>; interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA124_CLK_UARTA>; + resets = <&tegra_car 6>; + reset-names = "serial"; + dmas = <&apbdma 8>, <&apbdma 8>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -68,6 +130,11 @@ reg = <0x70006040 0x40>; reg-shift = <2>; interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA124_CLK_UARTB>; + resets = <&tegra_car 7>; + reset-names = "serial"; + dmas = <&apbdma 9>, <&apbdma 9>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -76,6 +143,11 @@ reg = <0x70006200 0x40>; reg-shift = <2>; interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA124_CLK_UARTC>; + resets = <&tegra_car 55>; + reset-names = "serial"; + dmas = <&apbdma 10>, <&apbdma 10>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -84,6 +156,11 @@ reg = <0x70006300 0x40>; reg-shift = <2>; interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA124_CLK_UARTD>; + resets = <&tegra_car 65>; + reset-names = "serial"; + dmas = <&apbdma 19>, <&apbdma 19>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -92,6 +169,201 @@ reg = <0x70006400 0x40>; reg-shift = <2>; interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA124_CLK_UARTE>; + resets = <&tegra_car 66>; + reset-names = "serial"; + dmas = <&apbdma 20>, <&apbdma 20>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + pwm@7000a000 { + compatible = "nvidia,tegra124-pwm", "nvidia,tegra20-pwm"; + reg = <0x7000a000 0x100>; + #pwm-cells = <2>; + clocks = <&tegra_car TEGRA124_CLK_PWM>; + resets = <&tegra_car 17>; + reset-names = "pwm"; + status = "disabled"; + }; + + i2c@7000c000 { + compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c"; + reg = <0x7000c000 0x100>; + interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car TEGRA124_CLK_I2C1>; + clock-names = "div-clk"; + resets = <&tegra_car 12>; + reset-names = "i2c"; + dmas = <&apbdma 21>, <&apbdma 21>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + i2c@7000c400 { + compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c"; + reg = <0x7000c400 0x100>; + interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car TEGRA124_CLK_I2C2>; + clock-names = "div-clk"; + resets = <&tegra_car 54>; + reset-names = "i2c"; + dmas = <&apbdma 22>, <&apbdma 22>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + i2c@7000c500 { + compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c"; + reg = <0x7000c500 0x100>; + interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car TEGRA124_CLK_I2C3>; + clock-names = "div-clk"; + resets = <&tegra_car 67>; + reset-names = "i2c"; + dmas = <&apbdma 23>, <&apbdma 23>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + i2c@7000c700 { + compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c"; + reg = <0x7000c700 0x100>; + interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car TEGRA124_CLK_I2C4>; + clock-names = "div-clk"; + resets = <&tegra_car 103>; + reset-names = "i2c"; + dmas = <&apbdma 26>, <&apbdma 26>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + i2c@7000d000 { + compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c"; + reg = <0x7000d000 0x100>; + interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car TEGRA124_CLK_I2C5>; + clock-names = "div-clk"; + resets = <&tegra_car 47>; + reset-names = "i2c"; + dmas = <&apbdma 24>, <&apbdma 24>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + i2c@7000d100 { + compatible = "nvidia,tegra124-i2c", "nvidia,tegra114-i2c"; + reg = <0x7000d100 0x100>; + interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car TEGRA124_CLK_I2C6>; + clock-names = "div-clk"; + resets = <&tegra_car 166>; + reset-names = "i2c"; + dmas = <&apbdma 30>, <&apbdma 30>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + spi@7000d400 { + compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi"; + reg = <0x7000d400 0x200>; + interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car TEGRA124_CLK_SBC1>; + clock-names = "spi"; + resets = <&tegra_car 41>; + reset-names = "spi"; + dmas = <&apbdma 15>, <&apbdma 15>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + spi@7000d600 { + compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi"; + reg = <0x7000d600 0x200>; + interrupts = <GIC_SPI 82 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car TEGRA124_CLK_SBC2>; + clock-names = "spi"; + resets = <&tegra_car 44>; + reset-names = "spi"; + dmas = <&apbdma 16>, <&apbdma 16>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + spi@7000d800 { + compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi"; + reg = <0x7000d800 0x200>; + interrupts = <GIC_SPI 83 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car TEGRA124_CLK_SBC3>; + clock-names = "spi"; + resets = <&tegra_car 46>; + reset-names = "spi"; + dmas = <&apbdma 17>, <&apbdma 17>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + spi@7000da00 { + compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi"; + reg = <0x7000da00 0x200>; + interrupts = <GIC_SPI 93 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car TEGRA124_CLK_SBC4>; + clock-names = "spi"; + resets = <&tegra_car 68>; + reset-names = "spi"; + dmas = <&apbdma 18>, <&apbdma 18>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + spi@7000dc00 { + compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi"; + reg = <0x7000dc00 0x200>; + interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car TEGRA124_CLK_SBC5>; + clock-names = "spi"; + resets = <&tegra_car 104>; + reset-names = "spi"; + dmas = <&apbdma 27>, <&apbdma 27>; + dma-names = "rx", "tx"; + status = "disabled"; + }; + + spi@7000de00 { + compatible = "nvidia,tegra124-spi", "nvidia,tegra114-spi"; + reg = <0x7000de00 0x200>; + interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; + #address-cells = <1>; + #size-cells = <0>; + clocks = <&tegra_car TEGRA124_CLK_SBC6>; + clock-names = "spi"; + resets = <&tegra_car 105>; + reset-names = "spi"; + dmas = <&apbdma 28>, <&apbdma 28>; + dma-names = "rx", "tx"; status = "disabled"; }; @@ -99,11 +371,157 @@ compatible = "nvidia,tegra124-rtc", "nvidia,tegra20-rtc"; reg = <0x7000e000 0x100>; interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA124_CLK_RTC>; }; pmc@7000e400 { compatible = "nvidia,tegra124-pmc"; reg = <0x7000e400 0x400>; + clocks = <&tegra_car TEGRA124_CLK_PCLK>, <&clk32k_in>; + clock-names = "pclk", "clk32k_in"; + }; + + sdhci@700b0000 { + compatible = "nvidia,tegra124-sdhci"; + reg = <0x700b0000 0x200>; + interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA124_CLK_SDMMC1>; + resets = <&tegra_car 14>; + reset-names = "sdhci"; + status = "disable"; + }; + + sdhci@700b0200 { + compatible = "nvidia,tegra124-sdhci"; + reg = <0x700b0200 0x200>; + interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA124_CLK_SDMMC2>; + resets = <&tegra_car 9>; + reset-names = "sdhci"; + status = "disable"; + }; + + sdhci@700b0400 { + compatible = "nvidia,tegra124-sdhci"; + reg = <0x700b0400 0x200>; + interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA124_CLK_SDMMC3>; + resets = <&tegra_car 69>; + reset-names = "sdhci"; + status = "disable"; + }; + + sdhci@700b0600 { + compatible = "nvidia,tegra124-sdhci"; + reg = <0x700b0600 0x200>; + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA124_CLK_SDMMC4>; + resets = <&tegra_car 15>; + reset-names = "sdhci"; + status = "disable"; + }; + + ahub@70300000 { + compatible = "nvidia,tegra124-ahub"; + reg = <0x70300000 0x200>, + <0x70300800 0x800>, + <0x70300200 0x600>; + interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&tegra_car TEGRA124_CLK_D_AUDIO>, + <&tegra_car TEGRA124_CLK_APBIF>; + clock-names = "d_audio", "apbif"; + resets = <&tegra_car 106>, /* d_audio */ + <&tegra_car 107>, /* apbif */ + <&tegra_car 30>, /* i2s0 */ + <&tegra_car 11>, /* i2s1 */ + <&tegra_car 18>, /* i2s2 */ + <&tegra_car 101>, /* i2s3 */ + <&tegra_car 102>, /* i2s4 */ + <&tegra_car 108>, /* dam0 */ + <&tegra_car 109>, /* dam1 */ + <&tegra_car 110>, /* dam2 */ + <&tegra_car 10>, /* spdif */ + <&tegra_car 153>, /* amx */ + <&tegra_car 185>, /* amx1 */ + <&tegra_car 154>, /* adx */ + <&tegra_car 180>, /* adx1 */ + <&tegra_car 186>, /* afc0 */ + <&tegra_car 187>, /* afc1 */ + <&tegra_car 188>, /* afc2 */ + <&tegra_car 189>, /* afc3 */ + <&tegra_car 190>, /* afc4 */ + <&tegra_car 191>; /* afc5 */ + reset-names = "d_audio", "apbif", "i2s0", "i2s1", "i2s2", + "i2s3", "i2s4", "dam0", "dam1", "dam2", + "spdif", "amx", "amx1", "adx", "adx1", + "afc0", "afc1", "afc2", "afc3", "afc4", "afc5"; + dmas = <&apbdma 1>, <&apbdma 1>, + <&apbdma 2>, <&apbdma 2>, + <&apbdma 3>, <&apbdma 3>, + <&apbdma 4>, <&apbdma 4>, + <&apbdma 6>, <&apbdma 6>, + <&apbdma 7>, <&apbdma 7>, + <&apbdma 12>, <&apbdma 12>, + <&apbdma 13>, <&apbdma 13>, + <&apbdma 14>, <&apbdma 14>, + <&apbdma 29>, <&apbdma 29>; + dma-names = "rx0", "tx0", "rx1", "tx1", "rx2", "tx2", + "rx3", "tx3", "rx4", "tx4", "rx5", "tx5", + "rx6", "tx6", "rx7", "tx7", "rx8", "tx8", + "rx9", "tx9"; + ranges; + #address-cells = <1>; + #size-cells = <1>; + + tegra_i2s0: i2s@70301000 { + compatible = "nvidia,tegra124-i2s"; + reg = <0x70301000 0x100>; + nvidia,ahub-cif-ids = <4 4>; + clocks = <&tegra_car TEGRA124_CLK_I2S0>; + resets = <&tegra_car 30>; + reset-names = "i2s"; + status = "disabled"; + }; + + tegra_i2s1: i2s@70301100 { + compatible = "nvidia,tegra124-i2s"; + reg = <0x70301100 0x100>; + nvidia,ahub-cif-ids = <5 5>; + clocks = <&tegra_car TEGRA124_CLK_I2S1>; + resets = <&tegra_car 11>; + reset-names = "i2s"; + status = "disabled"; + }; + + tegra_i2s2: i2s@70301200 { + compatible = "nvidia,tegra124-i2s"; + reg = <0x70301200 0x100>; + nvidia,ahub-cif-ids = <6 6>; + clocks = <&tegra_car TEGRA124_CLK_I2S2>; + resets = <&tegra_car 18>; + reset-names = "i2s"; + status = "disabled"; + }; + + tegra_i2s3: i2s@70301300 { + compatible = "nvidia,tegra124-i2s"; + reg = <0x70301300 0x100>; + nvidia,ahub-cif-ids = <7 7>; + clocks = <&tegra_car TEGRA124_CLK_I2S3>; + resets = <&tegra_car 101>; + reset-names = "i2s"; + status = "disabled"; + }; + + tegra_i2s4: i2s@70301400 { + compatible = "nvidia,tegra124-i2s"; + reg = <0x70301400 0x100>; + nvidia,ahub-cif-ids = <8 8>; + clocks = <&tegra_car TEGRA124_CLK_I2S4>; + resets = <&tegra_car 102>; + reset-names = "i2s"; + status = "disabled"; + }; }; cpus { diff --git a/arch/arm/boot/dts/tegra20-colibri-512.dtsi b/arch/arm/boot/dts/tegra20-colibri-512.dtsi index cbe89ff..8e0066a 100644 --- a/arch/arm/boot/dts/tegra20-colibri-512.dtsi +++ b/arch/arm/boot/dts/tegra20-colibri-512.dtsi @@ -4,12 +4,17 @@ model = "Toradex Colibri T20 512MB"; compatible = "toradex,colibri_t20-512", "nvidia,tegra20"; + aliases { + rtc0 = "/i2c@7000d000/tps6586x@34"; + rtc1 = "/rtc@7000e000"; + }; + memory { reg = <0x00000000 0x20000000>; }; - host1x { - hdmi { + host1x@50000000 { + hdmi@54280000 { vdd-supply = <&hdmi_vdd_reg>; pll-supply = <&hdmi_pll_reg>; @@ -19,7 +24,7 @@ }; }; - pinmux { + pinmux@70000014 { pinctrl-names = "default"; pinctrl-0 = <&state_default>; @@ -27,20 +32,20 @@ audio_refclk { nvidia,pins = "cdev1"; nvidia,function = "plla_out"; - nvidia,pull = <0>; - nvidia,tristate = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; crt { nvidia,pins = "crtp"; nvidia,function = "crt"; - nvidia,pull = <0>; - nvidia,tristate = <1>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; }; dap3 { nvidia,pins = "dap3"; nvidia,function = "dap3"; - nvidia,pull = <0>; - nvidia,tristate = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; displaya { nvidia,pins = "ld0", "ld1", "ld2", "ld3", @@ -50,155 +55,163 @@ "lhs", "lpw0", "lpw2", "lsc0", "lsc1", "lsck", "lsda", "lspi", "lvs"; nvidia,function = "displaya"; - nvidia,tristate = <1>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; }; gpio_dte { nvidia,pins = "dte"; nvidia,function = "rsvd1"; - nvidia,pull = <0>; - nvidia,tristate = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; gpio_gmi { nvidia,pins = "ata", "atc", "atd", "ate", "dap1", "dap2", "dap4", "gpu", "irrx", "irtx", "spia", "spib", "spic"; nvidia,function = "gmi"; - nvidia,pull = <0>; - nvidia,tristate = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; gpio_pta { nvidia,pins = "pta"; nvidia,function = "rsvd4"; - nvidia,pull = <0>; - nvidia,tristate = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; gpio_uac { nvidia,pins = "uac"; nvidia,function = "rsvd2"; - nvidia,pull = <0>; - nvidia,tristate = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; hdint { nvidia,pins = "hdint"; nvidia,function = "hdmi"; - nvidia,tristate = <1>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; }; i2c1 { nvidia,pins = "rm"; nvidia,function = "i2c1"; - nvidia,pull = <0>; - nvidia,tristate = <1>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; }; i2c3 { nvidia,pins = "dtf"; nvidia,function = "i2c3"; - nvidia,pull = <0>; - nvidia,tristate = <1>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; }; i2cddc { nvidia,pins = "ddc"; nvidia,function = "i2c2"; - nvidia,pull = <2>; - nvidia,tristate = <1>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; }; i2cp { nvidia,pins = "i2cp"; nvidia,function = "i2cp"; - nvidia,pull = <0>; - nvidia,tristate = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; irda { nvidia,pins = "uad"; nvidia,function = "irda"; - nvidia,pull = <0>; - nvidia,tristate = <1>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; }; nand { nvidia,pins = "kbca", "kbcc", "kbcd", "kbce", "kbcf"; nvidia,function = "nand"; - nvidia,pull = <0>; - nvidia,tristate = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; owc { nvidia,pins = "owc"; nvidia,function = "owr"; - nvidia,pull = <0>; - nvidia,tristate = <1>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; }; pmc { nvidia,pins = "pmc"; nvidia,function = "pwr_on"; - nvidia,tristate = <0>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; pwm { nvidia,pins = "sdb", "sdc", "sdd"; nvidia,function = "pwm"; - nvidia,tristate = <1>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; }; sdio4 { nvidia,pins = "atb", "gma", "gme"; nvidia,function = "sdio4"; - nvidia,pull = <0>; - nvidia,tristate = <1>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; }; spi1 { nvidia,pins = "spid", "spie", "spif"; nvidia,function = "spi1"; - nvidia,pull = <0>; - nvidia,tristate = <1>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; }; spi4 { nvidia,pins = "slxa", "slxc", "slxd", "slxk"; nvidia,function = "spi4"; - nvidia,pull = <0>; - nvidia,tristate = <1>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; }; uarta { nvidia,pins = "sdio1"; nvidia,function = "uarta"; - nvidia,pull = <0>; - nvidia,tristate = <1>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; }; uartd { nvidia,pins = "gmc"; nvidia,function = "uartd"; - nvidia,pull = <0>; - nvidia,tristate = <1>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; }; ulpi { nvidia,pins = "uaa", "uab", "uda"; nvidia,function = "ulpi"; - nvidia,pull = <0>; - nvidia,tristate = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; ulpi_refclk { nvidia,pins = "cdev2"; nvidia,function = "pllp_out4"; - nvidia,pull = <0>; - nvidia,tristate = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; usb_gpio { nvidia,pins = "spig", "spih"; nvidia,function = "spi2_alt"; - nvidia,pull = <0>; - nvidia,tristate = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; vi { nvidia,pins = "dta", "dtb", "dtc", "dtd"; nvidia,function = "vi"; - nvidia,pull = <0>; - nvidia,tristate = <1>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; }; vi_sc { nvidia,pins = "csus"; nvidia,function = "vi_sensor_clk"; - nvidia,pull = <0>; - nvidia,tristate = <1>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; }; }; }; + ac97: ac97@70002000 { + status = "okay"; + nvidia,codec-reset-gpio = <&gpio TEGRA_GPIO(V, 0) + GPIO_ACTIVE_HIGH>; + nvidia,codec-sync-gpio = <&gpio TEGRA_GPIO(P, 0) + GPIO_ACTIVE_HIGH>; + }; + i2c@7000c000 { clock-frequency = <400000>; }; @@ -225,15 +238,15 @@ #gpio-cells = <2>; gpio-controller; - sys-supply = <&vdd_5v0_reg>; + sys-supply = <&vdd_3v3_reg>; vin-sm0-supply = <&sys_reg>; vin-sm1-supply = <&sys_reg>; vin-sm2-supply = <&sys_reg>; vinldo01-supply = <&sm2_reg>; - vinldo23-supply = <&sm2_reg>; - vinldo4-supply = <&sm2_reg>; - vinldo678-supply = <&sm2_reg>; - vinldo9-supply = <&sm2_reg>; + vinldo23-supply = <&vdd_3v3_reg>; + vinldo4-supply = <&vdd_3v3_reg>; + vinldo678-supply = <&vdd_3v3_reg>; + vinldo9-supply = <&vdd_3v3_reg>; regulators { #address-cells = <1>; @@ -250,8 +263,8 @@ reg = <1>; regulator-compatible = "sm0"; regulator-name = "vdd_sm0,vdd_core"; - regulator-min-microvolt = <1275000>; - regulator-max-microvolt = <1275000>; + regulator-min-microvolt = <1200000>; + regulator-max-microvolt = <1200000>; regulator-always-on; }; @@ -259,8 +272,8 @@ reg = <2>; regulator-compatible = "sm1"; regulator-name = "vdd_sm1,vdd_cpu"; - regulator-min-microvolt = <1100000>; - regulator-max-microvolt = <1100000>; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; regulator-always-on; }; @@ -316,8 +329,8 @@ reg = <10>; regulator-compatible = "ldo6"; regulator-name = "vdd_ldo6,avdd_vdac,vddio_vi,vddio_cam"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; + regulator-min-microvolt = <2850000>; + regulator-max-microvolt = <2850000>; }; hdmi_vdd_reg: regulator@11 { @@ -362,7 +375,7 @@ }; }; - pmc { + pmc@7000e400 { nvidia,suspend-mode = <1>; nvidia,cpu-pwr-good-time = <5000>; nvidia,cpu-pwr-off-time = <5000>; @@ -442,14 +455,6 @@ }; }; - ac97: ac97 { - status = "okay"; - nvidia,codec-reset-gpio = <&gpio TEGRA_GPIO(V, 0) - GPIO_ACTIVE_HIGH>; - nvidia,codec-sync-gpio = <&gpio TEGRA_GPIO(P, 0) - GPIO_ACTIVE_HIGH>; - }; - usb@c5004000 { status = "okay"; nvidia,phy-reset-gpio = <&gpio TEGRA_GPIO(V, 1) @@ -471,7 +476,7 @@ #address-cells = <1>; #size-cells = <0>; - clk32k_in: clock { + clk32k_in: clock@0 { compatible = "fixed-clock"; reg=<0>; #clock-cells = <0>; @@ -479,37 +484,17 @@ }; }; - sound { - compatible = "nvidia,tegra-audio-wm9712-colibri_t20", - "nvidia,tegra-audio-wm9712"; - nvidia,model = "Colibri T20 AC97 Audio"; - - nvidia,audio-routing = - "Headphone", "HPOUTL", - "Headphone", "HPOUTR", - "LineIn", "LINEINL", - "LineIn", "LINEINR", - "Mic", "MIC1"; - - nvidia,ac97-controller = <&ac97>; - - clocks = <&tegra_car TEGRA20_CLK_PLL_A>, - <&tegra_car TEGRA20_CLK_PLL_A_OUT0>, - <&tegra_car TEGRA20_CLK_CDEV1>; - clock-names = "pll_a", "pll_a_out0", "mclk"; - }; - regulators { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <0>; - vdd_5v0_reg: regulator@100 { + vdd_3v3_reg: regulator@100 { compatible = "regulator-fixed"; reg = <100>; - regulator-name = "vdd_5v0"; - regulator-min-microvolt = <5000000>; - regulator-max-microvolt = <5000000>; + regulator-name = "vdd_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; regulator-always-on; }; @@ -525,4 +510,24 @@ gpio = <&gpio TEGRA_GPIO(BB, 1) GPIO_ACTIVE_HIGH>; }; }; + + sound { + compatible = "nvidia,tegra-audio-wm9712-colibri_t20", + "nvidia,tegra-audio-wm9712"; + nvidia,model = "Colibri T20 AC97 Audio"; + + nvidia,audio-routing = + "Headphone", "HPOUTL", + "Headphone", "HPOUTR", + "LineIn", "LINEINL", + "LineIn", "LINEINR", + "Mic", "MIC1"; + + nvidia,ac97-controller = <&ac97>; + + clocks = <&tegra_car TEGRA20_CLK_PLL_A>, + <&tegra_car TEGRA20_CLK_PLL_A_OUT0>, + <&tegra_car TEGRA20_CLK_CDEV1>; + clock-names = "pll_a", "pll_a_out0", "mclk"; + }; }; diff --git a/arch/arm/boot/dts/tegra20-harmony.dts b/arch/arm/boot/dts/tegra20-harmony.dts index e156ab3..3fb1f50 100644 --- a/arch/arm/boot/dts/tegra20-harmony.dts +++ b/arch/arm/boot/dts/tegra20-harmony.dts @@ -1,17 +1,31 @@ /dts-v1/; +#include <dt-bindings/input/input.h> #include "tegra20.dtsi" / { model = "NVIDIA Tegra20 Harmony evaluation board"; compatible = "nvidia,harmony", "nvidia,tegra20"; + aliases { + rtc0 = "/i2c@7000d000/tps6586x@34"; + rtc1 = "/rtc@7000e000"; + }; + memory { reg = <0x00000000 0x40000000>; }; - host1x { - hdmi { + host1x@50000000 { + dc@54200000 { + rgb { + status = "okay"; + + nvidia,panel = <&panel>; + }; + }; + + hdmi@54280000 { status = "okay"; vdd-supply = <&hdmi_vdd_reg>; @@ -23,7 +37,7 @@ }; }; - pinmux { + pinmux@70000014 { pinctrl-names = "default"; pinctrl-0 = <&state_default>; @@ -184,50 +198,50 @@ "gmb", "gmc", "gmd", "gme", "gpu7", "gpv", "i2cp", "pta", "rm", "slxa", "slxk", "spia", "spib", "uac"; - nvidia,pull = <0>; - nvidia,tristate = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; conf_ck32 { nvidia,pins = "ck32", "ddrc", "pmca", "pmcb", "pmcc", "pmcd", "pmce", "xm2c", "xm2d"; - nvidia,pull = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; }; conf_csus { nvidia,pins = "csus", "spid", "spif"; - nvidia,pull = <1>; - nvidia,tristate = <1>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; }; conf_crtp { nvidia,pins = "crtp", "dap2", "dap3", "dap4", "dtc", "dte", "dtf", "gpu", "sdio1", "slxc", "slxd", "spdi", "spdo", "spig", "uda"; - nvidia,pull = <0>; - nvidia,tristate = <1>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; }; conf_ddc { nvidia,pins = "ddc", "dta", "dtd", "kbca", "kbcb", "kbcc", "kbcd", "kbce", "kbcf", "sdc"; - nvidia,pull = <2>; - nvidia,tristate = <0>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; conf_hdint { nvidia,pins = "hdint", "lcsn", "ldc", "lm1", "lpw1", "lsc1", "lsck", "lsda", "lsdi", "lvp0", "owc", "sdb"; - nvidia,tristate = <1>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; }; conf_irrx { nvidia,pins = "irrx", "irtx", "sdd", "spic", "spie", "spih", "uaa", "uab", "uad", "uca", "ucb"; - nvidia,pull = <2>; - nvidia,tristate = <1>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; }; conf_lc { nvidia,pins = "lc", "ls"; - nvidia,pull = <2>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; }; conf_ld0 { nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4", @@ -237,12 +251,12 @@ "lhp1", "lhp2", "lhs", "lm0", "lpp", "lpw0", "lpw2", "lsc0", "lspi", "lvp1", "lvs", "pmc"; - nvidia,tristate = <0>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; conf_ld17_0 { nvidia,pins = "ld17_0", "ld19_18", "ld21_20", "ld23_22"; - nvidia,pull = <1>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; }; }; }; @@ -255,6 +269,10 @@ status = "okay"; }; + pwm: pwm@7000a000 { + status = "okay"; + }; + i2c@7000c000 { status = "okay"; clock-frequency = <400000>; @@ -415,7 +433,124 @@ }; }; - pmc { + kbc@7000e200 { + status = "okay"; + nvidia,debounce-delay-ms = <2>; + nvidia,repeat-delay-ms = <160>; + nvidia,kbc-row-pins = <0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15>; + nvidia,kbc-col-pins = <16 17 18 19 20 21 22 23>; + linux,keymap = <MATRIX_KEY(0x00, 0x02, KEY_W) + MATRIX_KEY(0x00, 0x03, KEY_S) + MATRIX_KEY(0x00, 0x04, KEY_A) + MATRIX_KEY(0x00, 0x05, KEY_Z) + MATRIX_KEY(0x00, 0x07, KEY_FN) + MATRIX_KEY(0x01, 0x07, KEY_MENU) + MATRIX_KEY(0x02, 0x06, KEY_LEFTALT) + MATRIX_KEY(0x02, 0x07, KEY_RIGHTALT) + MATRIX_KEY(0x03, 0x00, KEY_5) + MATRIX_KEY(0x03, 0x01, KEY_4) + MATRIX_KEY(0x03, 0x02, KEY_R) + MATRIX_KEY(0x03, 0x03, KEY_E) + MATRIX_KEY(0x03, 0x04, KEY_F) + MATRIX_KEY(0x03, 0x05, KEY_D) + MATRIX_KEY(0x03, 0x06, KEY_X) + MATRIX_KEY(0x04, 0x00, KEY_7) + MATRIX_KEY(0x04, 0x01, KEY_6) + MATRIX_KEY(0x04, 0x02, KEY_T) + MATRIX_KEY(0x04, 0x03, KEY_H) + MATRIX_KEY(0x04, 0x04, KEY_G) + MATRIX_KEY(0x04, 0x05, KEY_V) + MATRIX_KEY(0x04, 0x06, KEY_C) + MATRIX_KEY(0x04, 0x07, KEY_SPACE) + MATRIX_KEY(0x05, 0x00, KEY_9) + MATRIX_KEY(0x05, 0x01, KEY_8) + MATRIX_KEY(0x05, 0x02, KEY_U) + MATRIX_KEY(0x05, 0x03, KEY_Y) + MATRIX_KEY(0x05, 0x04, KEY_J) + MATRIX_KEY(0x05, 0x05, KEY_N) + MATRIX_KEY(0x05, 0x06, KEY_B) + MATRIX_KEY(0x05, 0x07, KEY_BACKSLASH) + MATRIX_KEY(0x06, 0x00, KEY_MINUS) + MATRIX_KEY(0x06, 0x01, KEY_0) + MATRIX_KEY(0x06, 0x02, KEY_O) + MATRIX_KEY(0x06, 0x03, KEY_I) + MATRIX_KEY(0x06, 0x04, KEY_L) + MATRIX_KEY(0x06, 0x05, KEY_K) + MATRIX_KEY(0x06, 0x06, KEY_COMMA) + MATRIX_KEY(0x06, 0x07, KEY_M) + MATRIX_KEY(0x07, 0x01, KEY_EQUAL) + MATRIX_KEY(0x07, 0x02, KEY_RIGHTBRACE) + MATRIX_KEY(0x07, 0x03, KEY_ENTER) + MATRIX_KEY(0x07, 0x07, KEY_MENU) + MATRIX_KEY(0x08, 0x04, KEY_LEFTSHIFT) + MATRIX_KEY(0x08, 0x05, KEY_RIGHTSHIFT) + MATRIX_KEY(0x09, 0x05, KEY_LEFTCTRL) + MATRIX_KEY(0x09, 0x07, KEY_RIGHTCTRL) + MATRIX_KEY(0x0B, 0x00, KEY_LEFTBRACE) + MATRIX_KEY(0x0B, 0x01, KEY_P) + MATRIX_KEY(0x0B, 0x02, KEY_APOSTROPHE) + MATRIX_KEY(0x0B, 0x03, KEY_SEMICOLON) + MATRIX_KEY(0x0B, 0x04, KEY_SLASH) + MATRIX_KEY(0x0B, 0x05, KEY_DOT) + MATRIX_KEY(0x0C, 0x00, KEY_F10) + MATRIX_KEY(0x0C, 0x01, KEY_F9) + MATRIX_KEY(0x0C, 0x02, KEY_BACKSPACE) + MATRIX_KEY(0x0C, 0x03, KEY_3) + MATRIX_KEY(0x0C, 0x04, KEY_2) + MATRIX_KEY(0x0C, 0x05, KEY_UP) + MATRIX_KEY(0x0C, 0x06, KEY_PRINT) + MATRIX_KEY(0x0C, 0x07, KEY_PAUSE) + MATRIX_KEY(0x0D, 0x00, KEY_INSERT) + MATRIX_KEY(0x0D, 0x01, KEY_DELETE) + MATRIX_KEY(0x0D, 0x03, KEY_PAGEUP ) + MATRIX_KEY(0x0D, 0x04, KEY_PAGEDOWN) + MATRIX_KEY(0x0D, 0x05, KEY_RIGHT) + MATRIX_KEY(0x0D, 0x06, KEY_DOWN) + MATRIX_KEY(0x0D, 0x07, KEY_LEFT) + MATRIX_KEY(0x0E, 0x00, KEY_F11) + MATRIX_KEY(0x0E, 0x01, KEY_F12) + MATRIX_KEY(0x0E, 0x02, KEY_F8) + MATRIX_KEY(0x0E, 0x03, KEY_Q) + MATRIX_KEY(0x0E, 0x04, KEY_F4) + MATRIX_KEY(0x0E, 0x05, KEY_F3) + MATRIX_KEY(0x0E, 0x06, KEY_1) + MATRIX_KEY(0x0E, 0x07, KEY_F7) + MATRIX_KEY(0x0F, 0x00, KEY_ESC) + MATRIX_KEY(0x0F, 0x01, KEY_GRAVE) + MATRIX_KEY(0x0F, 0x02, KEY_F5) + MATRIX_KEY(0x0F, 0x03, KEY_TAB) + MATRIX_KEY(0x0F, 0x04, KEY_F1) + MATRIX_KEY(0x0F, 0x05, KEY_F2) + MATRIX_KEY(0x0F, 0x06, KEY_CAPSLOCK) + MATRIX_KEY(0x0F, 0x07, KEY_F6) + MATRIX_KEY(0x14, 0x00, KEY_KP7) + MATRIX_KEY(0x15, 0x00, KEY_KP9) + MATRIX_KEY(0x15, 0x01, KEY_KP8) + MATRIX_KEY(0x15, 0x02, KEY_KP4) + MATRIX_KEY(0x15, 0x04, KEY_KP1) + MATRIX_KEY(0x16, 0x01, KEY_KPSLASH) + MATRIX_KEY(0x16, 0x02, KEY_KP6) + MATRIX_KEY(0x16, 0x03, KEY_KP5) + MATRIX_KEY(0x16, 0x04, KEY_KP3) + MATRIX_KEY(0x16, 0x05, KEY_KP2) + MATRIX_KEY(0x16, 0x07, KEY_KP0) + MATRIX_KEY(0x1B, 0x01, KEY_KPASTERISK) + MATRIX_KEY(0x1B, 0x03, KEY_KPMINUS) + MATRIX_KEY(0x1B, 0x04, KEY_KPPLUS) + MATRIX_KEY(0x1B, 0x05, KEY_KPDOT) + MATRIX_KEY(0x1C, 0x05, KEY_VOLUMEUP) + MATRIX_KEY(0x1D, 0x03, KEY_HOME) + MATRIX_KEY(0x1D, 0x04, KEY_END) + MATRIX_KEY(0x1D, 0x05, KEY_BRIGHTNESSUP) + MATRIX_KEY(0x1D, 0x06, KEY_VOLUMEDOWN) + MATRIX_KEY(0x1D, 0x07, KEY_BRIGHTNESSDOWN) + MATRIX_KEY(0x1E, 0x00, KEY_NUMLOCK) + MATRIX_KEY(0x1E, 0x01, KEY_SCROLLLOCK) + MATRIX_KEY(0x1E, 0x02, KEY_MUTE) + MATRIX_KEY(0x1F, 0x04, KEY_QUESTION)>; + }; + + pmc@7000e400 { nvidia,invert-interrupt; nvidia,suspend-mode = <1>; nvidia,cpu-pwr-good-time = <5000>; @@ -425,7 +560,7 @@ nvidia,sys-clock-req-active-high; }; - pcie-controller { + pcie-controller@80003000 { pex-clk-supply = <&pci_clk_reg>; vdd-supply = <&pci_vdd_reg>; status = "okay"; @@ -483,12 +618,23 @@ bus-width = <8>; }; + backlight: backlight { + compatible = "pwm-backlight"; + + enable-gpios = <&gpio TEGRA_GPIO(B, 5) GPIO_ACTIVE_HIGH>; + power-supply = <&vdd_bl_reg>; + pwms = <&pwm 0 5000000>; + + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + }; + clocks { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <0>; - clk32k_in: clock { + clk32k_in: clock@0 { compatible = "fixed-clock"; reg=<0>; #clock-cells = <0>; @@ -502,126 +648,18 @@ power { label = "Power"; gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>; - linux,code = <116>; /* KEY_POWER */ + linux,code = <KEY_POWER>; gpio-key,wakeup; }; }; - kbc { - status = "okay"; - nvidia,debounce-delay-ms = <2>; - nvidia,repeat-delay-ms = <160>; - nvidia,kbc-row-pins = <0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15>; - nvidia,kbc-col-pins = <16 17 18 19 20 21 22 23>; - linux,keymap = <0x00020011 /* KEY_W */ - 0x0003001F /* KEY_S */ - 0x0004001E /* KEY_A */ - 0x0005002C /* KEY_Z */ - 0x000701D0 /* KEY_FN */ - 0x0107008B /* KEY_MENU */ - 0x02060038 /* KEY_LEFTALT */ - 0x02070064 /* KEY_RIGHTALT */ - 0x03000006 /* KEY_5 */ - 0x03010005 /* KEY_4 */ - 0x03020013 /* KEY_R */ - 0x03030012 /* KEY_E */ - 0x03040021 /* KEY_F */ - 0x03050020 /* KEY_D */ - 0x0306002D /* KEY_X */ - 0x04000008 /* KEY_7 */ - 0x04010007 /* KEY_6 */ - 0x04020014 /* KEY_T */ - 0x04030023 /* KEY_H */ - 0x04040022 /* KEY_G */ - 0x0405002F /* KEY_V */ - 0x0406002E /* KEY_C */ - 0x04070039 /* KEY_SPACE */ - 0x0500000A /* KEY_9 */ - 0x05010009 /* KEY_8 */ - 0x05020016 /* KEY_U */ - 0x05030015 /* KEY_Y */ - 0x05040024 /* KEY_J */ - 0x05050031 /* KEY_N */ - 0x05060030 /* KEY_B */ - 0x0507002B /* KEY_BACKSLASH */ - 0x0600000C /* KEY_MINUS */ - 0x0601000B /* KEY_0 */ - 0x06020018 /* KEY_O */ - 0x06030017 /* KEY_I */ - 0x06040026 /* KEY_L */ - 0x06050025 /* KEY_K */ - 0x06060033 /* KEY_COMMA */ - 0x06070032 /* KEY_M */ - 0x0701000D /* KEY_EQUAL */ - 0x0702001B /* KEY_RIGHTBRACE */ - 0x0703001C /* KEY_ENTER */ - 0x0707008B /* KEY_MENU */ - 0x0804002A /* KEY_LEFTSHIFT */ - 0x08050036 /* KEY_RIGHTSHIFT */ - 0x0905001D /* KEY_LEFTCTRL */ - 0x09070061 /* KEY_RIGHTCTRL */ - 0x0B00001A /* KEY_LEFTBRACE */ - 0x0B010019 /* KEY_P */ - 0x0B020028 /* KEY_APOSTROPHE */ - 0x0B030027 /* KEY_SEMICOLON */ - 0x0B040035 /* KEY_SLASH */ - 0x0B050034 /* KEY_DOT */ - 0x0C000044 /* KEY_F10 */ - 0x0C010043 /* KEY_F9 */ - 0x0C02000E /* KEY_BACKSPACE */ - 0x0C030004 /* KEY_3 */ - 0x0C040003 /* KEY_2 */ - 0x0C050067 /* KEY_UP */ - 0x0C0600D2 /* KEY_PRINT */ - 0x0C070077 /* KEY_PAUSE */ - 0x0D00006E /* KEY_INSERT */ - 0x0D01006F /* KEY_DELETE */ - 0x0D030068 /* KEY_PAGEUP */ - 0x0D04006D /* KEY_PAGEDOWN */ - 0x0D05006A /* KEY_RIGHT */ - 0x0D06006C /* KEY_DOWN */ - 0x0D070069 /* KEY_LEFT */ - 0x0E000057 /* KEY_F11 */ - 0x0E010058 /* KEY_F12 */ - 0x0E020042 /* KEY_F8 */ - 0x0E030010 /* KEY_Q */ - 0x0E04003E /* KEY_F4 */ - 0x0E05003D /* KEY_F3 */ - 0x0E060002 /* KEY_1 */ - 0x0E070041 /* KEY_F7 */ - 0x0F000001 /* KEY_ESC */ - 0x0F010029 /* KEY_GRAVE */ - 0x0F02003F /* KEY_F5 */ - 0x0F03000F /* KEY_TAB */ - 0x0F04003B /* KEY_F1 */ - 0x0F05003C /* KEY_F2 */ - 0x0F06003A /* KEY_CAPSLOCK */ - 0x0F070040 /* KEY_F6 */ - 0x14000047 /* KEY_KP7 */ - 0x15000049 /* KEY_KP9 */ - 0x15010048 /* KEY_KP8 */ - 0x1502004B /* KEY_KP4 */ - 0x1504004F /* KEY_KP1 */ - 0x1601004E /* KEY_KPSLASH */ - 0x1602004D /* KEY_KP6 */ - 0x1603004C /* KEY_KP5 */ - 0x16040051 /* KEY_KP3 */ - 0x16050050 /* KEY_KP2 */ - 0x16070052 /* KEY_KP0 */ - 0x1B010037 /* KEY_KPASTERISK */ - 0x1B03004A /* KEY_KPMINUS */ - 0x1B04004E /* KEY_KPPLUS */ - 0x1B050053 /* KEY_KPDOT */ - 0x1C050073 /* KEY_VOLUMEUP */ - 0x1D030066 /* KEY_HOME */ - 0x1D04006B /* KEY_END */ - 0x1D0500E1 /* KEY_BRIGHTNESSUP */ - 0x1D060072 /* KEY_VOLUMEDOWN */ - 0x1D0700E0 /* KEY_BRIGHTNESSDOWN */ - 0x1E000045 /* KEY_NUMLOCK */ - 0x1E010046 /* KEY_SCROLLLOCK */ - 0x1E020071 /* KEY_MUTE */ - 0x1F0400D6>; /* KEY_QUESTION */ + panel: panel { + compatible = "auo,b101aw03", "simple-panel"; + + power-supply = <&vdd_pnl_reg>; + enable-gpios = <&gpio TEGRA_GPIO(B, 2) GPIO_ACTIVE_HIGH>; + + backlight = <&backlight>; }; regulators { @@ -667,7 +705,7 @@ enable-active-high; }; - regulator@4 { + vdd_pnl_reg: regulator@4 { compatible = "regulator-fixed"; reg = <4>; regulator-name = "vdd_pnl"; @@ -677,7 +715,7 @@ enable-active-high; }; - regulator@5 { + vdd_bl_reg: regulator@5 { compatible = "regulator-fixed"; reg = <5>; regulator-name = "vdd_bl"; diff --git a/arch/arm/boot/dts/tegra20-iris-512.dts b/arch/arm/boot/dts/tegra20-iris-512.dts index f2222bd..8cfb83f 100644 --- a/arch/arm/boot/dts/tegra20-iris-512.dts +++ b/arch/arm/boot/dts/tegra20-iris-512.dts @@ -6,61 +6,61 @@ model = "Toradex Colibri T20 512MB on Iris"; compatible = "toradex,iris", "toradex,colibri_t20-512", "nvidia,tegra20"; - host1x { - hdmi { + host1x@50000000 { + hdmi@54280000 { status = "okay"; }; }; - pinmux { + pinmux@70000014 { state_default: pinmux { hdint { - nvidia,tristate = <0>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; i2cddc { - nvidia,tristate = <0>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; sdio4 { - nvidia,tristate = <0>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; uarta { - nvidia,tristate = <0>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; uartd { - nvidia,tristate = <0>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; }; }; - usb@c5000000 { + serial@70006000 { status = "okay"; }; - usb-phy@c5000000 { + serial@70006300 { status = "okay"; }; - usb@c5008000 { + i2c_ddc: i2c@7000c400 { status = "okay"; }; - usb-phy@c5008000 { + usb@c5000000 { status = "okay"; }; - serial@70006000 { + usb-phy@c5000000 { status = "okay"; }; - serial@70006300 { + usb@c5008000 { status = "okay"; }; - i2c_ddc: i2c@7000c400 { + usb-phy@c5008000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/tegra20-medcom-wide.dts b/arch/arm/boot/dts/tegra20-medcom-wide.dts index 7580578..6d3a4cb 100644 --- a/arch/arm/boot/dts/tegra20-medcom-wide.dts +++ b/arch/arm/boot/dts/tegra20-medcom-wide.dts @@ -6,7 +6,7 @@ model = "Avionic Design Medcom-Wide board"; compatible = "ad,medcom-wide", "ad,tamonten", "nvidia,tegra20"; - pwm { + pwm@7000a000 { status = "okay"; }; diff --git a/arch/arm/boot/dts/tegra20-paz00.dts b/arch/arm/boot/dts/tegra20-paz00.dts index e57fb3ae..c7cd8e6 100644 --- a/arch/arm/boot/dts/tegra20-paz00.dts +++ b/arch/arm/boot/dts/tegra20-paz00.dts @@ -1,17 +1,23 @@ /dts-v1/; +#include <dt-bindings/input/input.h> #include "tegra20.dtsi" / { model = "Toshiba AC100 / Dynabook AZ"; compatible = "compal,paz00", "nvidia,tegra20"; + aliases { + rtc0 = "/i2c@7000d000/tps6586x@34"; + rtc1 = "/rtc@7000e000"; + }; + memory { reg = <0x00000000 0x20000000>; }; - host1x { - hdmi { + host1x@50000000 { + hdmi@54280000 { status = "okay"; vdd-supply = <&hdmi_vdd_reg>; @@ -23,7 +29,7 @@ }; }; - pinmux { + pinmux@70000014 { pinctrl-names = "default"; pinctrl-0 = <&state_default>; @@ -177,39 +183,39 @@ "gpu", "gpu7", "gpv", "i2cp", "pta", "rm", "sdio1", "slxk", "spdo", "uac", "uda"; - nvidia,pull = <0>; - nvidia,tristate = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; conf_ck32 { nvidia,pins = "ck32", "ddrc", "pmca", "pmcb", "pmcc", "pmcd", "pmce", "xm2c", "xm2d"; - nvidia,pull = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; }; conf_crtp { nvidia,pins = "crtp", "dap3", "dap4", "dtb", "dtc", "dte", "slxa", "slxc", "slxd", "spdi"; - nvidia,pull = <0>; - nvidia,tristate = <1>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; }; conf_csus { nvidia,pins = "csus", "spia", "spib", "spid", "spif"; - nvidia,pull = <1>; - nvidia,tristate = <1>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; }; conf_ddc { nvidia,pins = "ddc", "irrx", "irtx", "kbca", "kbcb", "kbcc", "kbcd", "kbce", "kbcf", "spic", "spig", "uaa", "uab"; - nvidia,pull = <2>; - nvidia,tristate = <0>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; conf_dta { nvidia,pins = "dta", "dtd", "owc", "sdc", "sdd", "spie", "spih", "uad", "uca", "ucb"; - nvidia,pull = <2>; - nvidia,tristate = <1>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; }; conf_hdint { nvidia,pins = "hdint", "ld0", "ld1", "ld2", @@ -218,23 +224,23 @@ "ld13", "ld14", "ld15", "ld16", "ld17", "ldc", "ldi", "lhs", "lsc0", "lspi", "lvs", "pmc"; - nvidia,tristate = <0>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; conf_lc { nvidia,pins = "lc", "ls"; - nvidia,pull = <2>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; }; conf_lcsn { nvidia,pins = "lcsn", "lhp0", "lhp1", "lhp2", "lm0", "lm1", "lpp", "lpw0", "lpw1", "lpw2", "lsc1", "lsck", "lsda", "lsdi", "lvp0", "lvp1", "sdb"; - nvidia,tristate = <1>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; }; conf_ld17_0 { nvidia,pins = "ld17_0", "ld19_18", "ld21_20", "ld23_22"; - nvidia,pull = <1>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; }; }; }; @@ -268,7 +274,7 @@ clock-frequency = <100000>; }; - nvec { + nvec@7000c500 { compatible = "nvidia,nvec"; reg = <0x7000c500 0x100>; interrupts = <GIC_SPI 92 IRQ_TYPE_LEVEL_HIGH>; @@ -417,7 +423,7 @@ }; }; - pmc { + pmc@7000e400 { nvidia,invert-interrupt; nvidia,suspend-mode = <1>; nvidia,cpu-pwr-good-time = <2000>; @@ -474,7 +480,7 @@ #address-cells = <1>; #size-cells = <0>; - clk32k_in: clock { + clk32k_in: clock@0 { compatible = "fixed-clock"; reg=<0>; #clock-cells = <0>; @@ -488,7 +494,7 @@ power { label = "Power"; gpios = <&gpio TEGRA_GPIO(J, 7) GPIO_ACTIVE_LOW>; - linux,code = <116>; /* KEY_POWER */ + linux,code = <KEY_POWER>; gpio-key,wakeup; }; }; diff --git a/arch/arm/boot/dts/tegra20-plutux.dts b/arch/arm/boot/dts/tegra20-plutux.dts index d7a358a..29051a2 100644 --- a/arch/arm/boot/dts/tegra20-plutux.dts +++ b/arch/arm/boot/dts/tegra20-plutux.dts @@ -6,8 +6,8 @@ model = "Avionic Design Plutux board"; compatible = "ad,plutux", "ad,tamonten", "nvidia,tegra20"; - host1x { - hdmi { + host1x@50000000 { + hdmi@54280000 { status = "okay"; }; }; diff --git a/arch/arm/boot/dts/tegra20-seaboard.dts b/arch/arm/boot/dts/tegra20-seaboard.dts index 315aae2..a11b6e7 100644 --- a/arch/arm/boot/dts/tegra20-seaboard.dts +++ b/arch/arm/boot/dts/tegra20-seaboard.dts @@ -1,17 +1,23 @@ /dts-v1/; +#include <dt-bindings/input/input.h> #include "tegra20.dtsi" / { model = "NVIDIA Seaboard"; compatible = "nvidia,seaboard", "nvidia,tegra20"; + aliases { + rtc0 = "/i2c@7000d000/tps6586x@34"; + rtc1 = "/rtc@7000e000"; + }; + memory { reg = <0x00000000 0x40000000>; }; - host1x { - hdmi { + host1x@50000000 { + hdmi@54280000 { status = "okay"; vdd-supply = <&hdmi_vdd_reg>; @@ -23,7 +29,7 @@ }; }; - pinmux { + pinmux@70000014 { pinctrl-names = "default"; pinctrl-0 = <&state_default>; @@ -189,53 +195,53 @@ "irtx", "pta", "rm", "sdc", "sdd", "slxd", "slxk", "spdi", "spdo", "uac", "uad", "uca", "ucb", "uda"; - nvidia,pull = <0>; - nvidia,tristate = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; conf_ate { nvidia,pins = "ate", "csus", "dap3", "gpv", "owc", "slxc", "spib", "spid", "spie"; - nvidia,pull = <0>; - nvidia,tristate = <1>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; }; conf_ck32 { nvidia,pins = "ck32", "ddrc", "pmca", "pmcb", "pmcc", "pmcd", "pmce", "xm2c", "xm2d"; - nvidia,pull = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; }; conf_crtp { nvidia,pins = "crtp", "gmb", "slxa", "spia", "spig", "spih"; - nvidia,pull = <2>; - nvidia,tristate = <1>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; }; conf_dta { nvidia,pins = "dta", "dtb", "dtc", "dtd"; - nvidia,pull = <1>; - nvidia,tristate = <0>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; conf_dte { nvidia,pins = "dte", "spif"; - nvidia,pull = <1>; - nvidia,tristate = <1>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; }; conf_hdint { nvidia,pins = "hdint", "lcsn", "ldc", "lm1", "lpw1", "lsc1", "lsck", "lsda", "lsdi", "lvp0"; - nvidia,tristate = <1>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; }; conf_kbca { nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd", "kbce", "kbcf", "sdio1", "spic", "uaa", "uab"; - nvidia,pull = <2>; - nvidia,tristate = <0>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; conf_lc { nvidia,pins = "lc", "ls"; - nvidia,pull = <2>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; }; conf_ld0 { nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4", @@ -245,22 +251,22 @@ "lhp1", "lhp2", "lhs", "lm0", "lpp", "lpw0", "lpw2", "lsc0", "lspi", "lvp1", "lvs", "pmc", "sdb"; - nvidia,tristate = <0>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; conf_ld17_0 { nvidia,pins = "ld17_0", "ld19_18", "ld21_20", "ld23_22"; - nvidia,pull = <1>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; }; drive_sdio1 { nvidia,pins = "drive_sdio1"; - nvidia,high-speed-mode = <0>; - nvidia,schmitt = <0>; - nvidia,low-power-mode = <3>; + nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>; + nvidia,schmitt = <TEGRA_PIN_DISABLE>; + nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>; nvidia,pull-down-strength = <31>; nvidia,pull-up-strength = <31>; - nvidia,slew-rate-rising = <3>; - nvidia,slew-rate-falling = <3>; + nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOWEST>; + nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOWEST>; }; }; @@ -386,6 +392,13 @@ status = "okay"; clock-frequency = <400000>; + magnetometer@c { + compatible = "ak,ak8975"; + reg = <0xc>; + interrupt-parent = <&gpio>; + interrupts = <TEGRA_GPIO(N, 5) IRQ_TYPE_LEVEL_HIGH>; + }; + pmic: tps6586x@34 { compatible = "ti,tps6586x"; reg = <0x34>; @@ -507,16 +520,149 @@ compatible = "onnn,nct1008"; reg = <0x4c>; }; + }; - magnetometer@c { - compatible = "ak,ak8975"; - reg = <0xc>; - interrupt-parent = <&gpio>; - interrupts = <TEGRA_GPIO(N, 5) IRQ_TYPE_LEVEL_HIGH>; - }; + kbc@7000e200 { + status = "okay"; + nvidia,debounce-delay-ms = <32>; + nvidia,repeat-delay-ms = <160>; + nvidia,ghost-filter; + nvidia,kbc-row-pins = <0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15>; + nvidia,kbc-col-pins = <16 17 18 19 20 21 22 23>; + linux,keymap = <MATRIX_KEY(0x00, 0x02, KEY_W) + MATRIX_KEY(0x00, 0x03, KEY_S) + MATRIX_KEY(0x00, 0x04, KEY_A) + MATRIX_KEY(0x00, 0x05, KEY_Z) + MATRIX_KEY(0x00, 0x07, KEY_FN) + + MATRIX_KEY(0x01, 0x07, KEY_LEFTMETA) + MATRIX_KEY(0x02, 0x06, KEY_RIGHTALT) + MATRIX_KEY(0x02, 0x07, KEY_LEFTALT) + + MATRIX_KEY(0x03, 0x00, KEY_5) + MATRIX_KEY(0x03, 0x01, KEY_4) + MATRIX_KEY(0x03, 0x02, KEY_R) + MATRIX_KEY(0x03, 0x03, KEY_E) + MATRIX_KEY(0x03, 0x04, KEY_F) + MATRIX_KEY(0x03, 0x05, KEY_D) + MATRIX_KEY(0x03, 0x06, KEY_X) + + MATRIX_KEY(0x04, 0x00, KEY_7) + MATRIX_KEY(0x04, 0x01, KEY_6) + MATRIX_KEY(0x04, 0x02, KEY_T) + MATRIX_KEY(0x04, 0x03, KEY_H) + MATRIX_KEY(0x04, 0x04, KEY_G) + MATRIX_KEY(0x04, 0x05, KEY_V) + MATRIX_KEY(0x04, 0x06, KEY_C) + MATRIX_KEY(0x04, 0x07, KEY_SPACE) + + MATRIX_KEY(0x05, 0x00, KEY_9) + MATRIX_KEY(0x05, 0x01, KEY_8) + MATRIX_KEY(0x05, 0x02, KEY_U) + MATRIX_KEY(0x05, 0x03, KEY_Y) + MATRIX_KEY(0x05, 0x04, KEY_J) + MATRIX_KEY(0x05, 0x05, KEY_N) + MATRIX_KEY(0x05, 0x06, KEY_B) + MATRIX_KEY(0x05, 0x07, KEY_BACKSLASH) + + MATRIX_KEY(0x06, 0x00, KEY_MINUS) + MATRIX_KEY(0x06, 0x01, KEY_0) + MATRIX_KEY(0x06, 0x02, KEY_O) + MATRIX_KEY(0x06, 0x03, KEY_I) + MATRIX_KEY(0x06, 0x04, KEY_L) + MATRIX_KEY(0x06, 0x05, KEY_K) + MATRIX_KEY(0x06, 0x06, KEY_COMMA) + MATRIX_KEY(0x06, 0x07, KEY_M) + + MATRIX_KEY(0x07, 0x01, KEY_EQUAL) + MATRIX_KEY(0x07, 0x02, KEY_RIGHTBRACE) + MATRIX_KEY(0x07, 0x03, KEY_ENTER) + MATRIX_KEY(0x07, 0x07, KEY_MENU) + + MATRIX_KEY(0x08, 0x04, KEY_RIGHTSHIFT) + MATRIX_KEY(0x08, 0x05, KEY_LEFTSHIFT) + + MATRIX_KEY(0x09, 0x05, KEY_RIGHTCTRL) + MATRIX_KEY(0x09, 0x07, KEY_LEFTCTRL) + + MATRIX_KEY(0x0B, 0x00, KEY_LEFTBRACE) + MATRIX_KEY(0x0B, 0x01, KEY_P) + MATRIX_KEY(0x0B, 0x02, KEY_APOSTROPHE) + MATRIX_KEY(0x0B, 0x03, KEY_SEMICOLON) + MATRIX_KEY(0x0B, 0x04, KEY_SLASH) + MATRIX_KEY(0x0B, 0x05, KEY_DOT) + + MATRIX_KEY(0x0C, 0x00, KEY_F10) + MATRIX_KEY(0x0C, 0x01, KEY_F9) + MATRIX_KEY(0x0C, 0x02, KEY_BACKSPACE) + MATRIX_KEY(0x0C, 0x03, KEY_3) + MATRIX_KEY(0x0C, 0x04, KEY_2) + MATRIX_KEY(0x0C, 0x05, KEY_UP) + MATRIX_KEY(0x0C, 0x06, KEY_PRINT) + MATRIX_KEY(0x0C, 0x07, KEY_PAUSE) + + MATRIX_KEY(0x0D, 0x00, KEY_INSERT) + MATRIX_KEY(0x0D, 0x01, KEY_DELETE) + MATRIX_KEY(0x0D, 0x03, KEY_PAGEUP ) + MATRIX_KEY(0x0D, 0x04, KEY_PAGEDOWN) + MATRIX_KEY(0x0D, 0x05, KEY_RIGHT) + MATRIX_KEY(0x0D, 0x06, KEY_DOWN) + MATRIX_KEY(0x0D, 0x07, KEY_LEFT) + + MATRIX_KEY(0x0E, 0x00, KEY_F11) + MATRIX_KEY(0x0E, 0x01, KEY_F12) + MATRIX_KEY(0x0E, 0x02, KEY_F8) + MATRIX_KEY(0x0E, 0x03, KEY_Q) + MATRIX_KEY(0x0E, 0x04, KEY_F4) + MATRIX_KEY(0x0E, 0x05, KEY_F3) + MATRIX_KEY(0x0E, 0x06, KEY_1) + MATRIX_KEY(0x0E, 0x07, KEY_F7) + + MATRIX_KEY(0x0F, 0x00, KEY_ESC) + MATRIX_KEY(0x0F, 0x01, KEY_GRAVE) + MATRIX_KEY(0x0F, 0x02, KEY_F5) + MATRIX_KEY(0x0F, 0x03, KEY_TAB) + MATRIX_KEY(0x0F, 0x04, KEY_F1) + MATRIX_KEY(0x0F, 0x05, KEY_F2) + MATRIX_KEY(0x0F, 0x06, KEY_CAPSLOCK) + MATRIX_KEY(0x0F, 0x07, KEY_F6) + + /* Software Handled Function Keys */ + MATRIX_KEY(0x14, 0x00, KEY_KP7) + + MATRIX_KEY(0x15, 0x00, KEY_KP9) + MATRIX_KEY(0x15, 0x01, KEY_KP8) + MATRIX_KEY(0x15, 0x02, KEY_KP4) + MATRIX_KEY(0x15, 0x04, KEY_KP1) + + MATRIX_KEY(0x16, 0x01, KEY_KPSLASH) + MATRIX_KEY(0x16, 0x02, KEY_KP6) + MATRIX_KEY(0x16, 0x03, KEY_KP5) + MATRIX_KEY(0x16, 0x04, KEY_KP3) + MATRIX_KEY(0x16, 0x05, KEY_KP2) + MATRIX_KEY(0x16, 0x07, KEY_KP0) + + MATRIX_KEY(0x1B, 0x01, KEY_KPASTERISK) + MATRIX_KEY(0x1B, 0x03, KEY_KPMINUS) + MATRIX_KEY(0x1B, 0x04, KEY_KPPLUS) + MATRIX_KEY(0x1B, 0x05, KEY_KPDOT) + + MATRIX_KEY(0x1C, 0x05, KEY_VOLUMEUP) + + MATRIX_KEY(0x1D, 0x03, KEY_HOME) + MATRIX_KEY(0x1D, 0x04, KEY_END) + MATRIX_KEY(0x1D, 0x05, KEY_BRIGHTNESSDOWN) + MATRIX_KEY(0x1D, 0x06, KEY_VOLUMEDOWN) + MATRIX_KEY(0x1D, 0x07, KEY_BRIGHTNESSUP) + + MATRIX_KEY(0x1E, 0x00, KEY_NUMLOCK) + MATRIX_KEY(0x1E, 0x01, KEY_SCROLLLOCK) + MATRIX_KEY(0x1E, 0x02, KEY_MUTE) + + MATRIX_KEY(0x1F, 0x04, KEY_HELP)>; }; - pmc { + pmc@7000e400 { nvidia,invert-interrupt; nvidia,suspend-mode = <1>; nvidia,cpu-pwr-good-time = <5000>; @@ -621,7 +767,7 @@ #address-cells = <1>; #size-cells = <0>; - clk32k_in: clock { + clk32k_in: clock@0 { compatible = "fixed-clock"; reg=<0>; #clock-cells = <0>; @@ -635,7 +781,7 @@ power { label = "Power"; gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>; - linux,code = <116>; /* KEY_POWER */ + linux,code = <KEY_POWER>; gpio-key,wakeup; }; @@ -649,145 +795,6 @@ }; }; - kbc { - status = "okay"; - nvidia,debounce-delay-ms = <32>; - nvidia,repeat-delay-ms = <160>; - nvidia,ghost-filter; - nvidia,kbc-row-pins = <0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15>; - nvidia,kbc-col-pins = <16 17 18 19 20 21 22 23>; - linux,keymap = <0x00020011 /* KEY_W */ - 0x0003001F /* KEY_S */ - 0x0004001E /* KEY_A */ - 0x0005002C /* KEY_Z */ - 0x000701d0 /* KEY_FN */ - - 0x0107007D /* KEY_LEFTMETA */ - 0x02060064 /* KEY_RIGHTALT */ - 0x02070038 /* KEY_LEFTALT */ - - 0x03000006 /* KEY_5 */ - 0x03010005 /* KEY_4 */ - 0x03020013 /* KEY_R */ - 0x03030012 /* KEY_E */ - 0x03040021 /* KEY_F */ - 0x03050020 /* KEY_D */ - 0x0306002D /* KEY_X */ - - 0x04000008 /* KEY_7 */ - 0x04010007 /* KEY_6 */ - 0x04020014 /* KEY_T */ - 0x04030023 /* KEY_H */ - 0x04040022 /* KEY_G */ - 0x0405002F /* KEY_V */ - 0x0406002E /* KEY_C */ - 0x04070039 /* KEY_SPACE */ - - 0x0500000A /* KEY_9 */ - 0x05010009 /* KEY_8 */ - 0x05020016 /* KEY_U */ - 0x05030015 /* KEY_Y */ - 0x05040024 /* KEY_J */ - 0x05050031 /* KEY_N */ - 0x05060030 /* KEY_B */ - 0x0507002B /* KEY_BACKSLASH */ - - 0x0600000C /* KEY_MINUS */ - 0x0601000B /* KEY_0 */ - 0x06020018 /* KEY_O */ - 0x06030017 /* KEY_I */ - 0x06040026 /* KEY_L */ - 0x06050025 /* KEY_K */ - 0x06060033 /* KEY_COMMA */ - 0x06070032 /* KEY_M */ - - 0x0701000D /* KEY_EQUAL */ - 0x0702001B /* KEY_RIGHTBRACE */ - 0x0703001C /* KEY_ENTER */ - 0x0707008B /* KEY_MENU */ - - 0x08040036 /* KEY_RIGHTSHIFT */ - 0x0805002A /* KEY_LEFTSHIFT */ - - 0x09050061 /* KEY_RIGHTCTRL */ - 0x0907001D /* KEY_LEFTCTRL */ - - 0x0B00001A /* KEY_LEFTBRACE */ - 0x0B010019 /* KEY_P */ - 0x0B020028 /* KEY_APOSTROPHE */ - 0x0B030027 /* KEY_SEMICOLON */ - 0x0B040035 /* KEY_SLASH */ - 0x0B050034 /* KEY_DOT */ - - 0x0C000044 /* KEY_F10 */ - 0x0C010043 /* KEY_F9 */ - 0x0C02000E /* KEY_BACKSPACE */ - 0x0C030004 /* KEY_3 */ - 0x0C040003 /* KEY_2 */ - 0x0C050067 /* KEY_UP */ - 0x0C0600D2 /* KEY_PRINT */ - 0x0C070077 /* KEY_PAUSE */ - - 0x0D00006E /* KEY_INSERT */ - 0x0D01006F /* KEY_DELETE */ - 0x0D030068 /* KEY_PAGEUP */ - 0x0D04006D /* KEY_PAGEDOWN */ - 0x0D05006A /* KEY_RIGHT */ - 0x0D06006C /* KEY_DOWN */ - 0x0D070069 /* KEY_LEFT */ - - 0x0E000057 /* KEY_F11 */ - 0x0E010058 /* KEY_F12 */ - 0x0E020042 /* KEY_F8 */ - 0x0E030010 /* KEY_Q */ - 0x0E04003E /* KEY_F4 */ - 0x0E05003D /* KEY_F3 */ - 0x0E060002 /* KEY_1 */ - 0x0E070041 /* KEY_F7 */ - - 0x0F000001 /* KEY_ESC */ - 0x0F010029 /* KEY_GRAVE */ - 0x0F02003F /* KEY_F5 */ - 0x0F03000F /* KEY_TAB */ - 0x0F04003B /* KEY_F1 */ - 0x0F05003C /* KEY_F2 */ - 0x0F06003A /* KEY_CAPSLOCK */ - 0x0F070040 /* KEY_F6 */ - - /* Software Handled Function Keys */ - 0x14000047 /* KEY_KP7 */ - - 0x15000049 /* KEY_KP9 */ - 0x15010048 /* KEY_KP8 */ - 0x1502004B /* KEY_KP4 */ - 0x1504004F /* KEY_KP1 */ - - 0x1601004E /* KEY_KPSLASH */ - 0x1602004D /* KEY_KP6 */ - 0x1603004C /* KEY_KP5 */ - 0x16040051 /* KEY_KP3 */ - 0x16050050 /* KEY_KP2 */ - 0x16070052 /* KEY_KP0 */ - - 0x1B010037 /* KEY_KPASTERISK */ - 0x1B03004A /* KEY_KPMINUS */ - 0x1B04004E /* KEY_KPPLUS */ - 0x1B050053 /* KEY_KPDOT */ - - 0x1C050073 /* KEY_VOLUMEUP */ - - 0x1D030066 /* KEY_HOME */ - 0x1D04006B /* KEY_END */ - 0x1D0500E0 /* KEY_BRIGHTNESSDOWN */ - 0x1D060072 /* KEY_VOLUMEDOWN */ - 0x1D0700E1 /* KEY_BRIGHTNESSUP */ - - 0x1E000045 /* KEY_NUMLOCK */ - 0x1E010046 /* KEY_SCROLLLOCK */ - 0x1E020071 /* KEY_MUTE */ - - 0x1F04008A>; /* KEY_HELP */ - }; regulators { compatible = "simple-bus"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/tegra20-tamonten.dtsi b/arch/arm/boot/dts/tegra20-tamonten.dtsi index 7726dab..a1b0d96 100644 --- a/arch/arm/boot/dts/tegra20-tamonten.dtsi +++ b/arch/arm/boot/dts/tegra20-tamonten.dtsi @@ -4,12 +4,17 @@ model = "Avionic Design Tamonten SOM"; compatible = "ad,tamonten", "nvidia,tegra20"; + aliases { + rtc0 = "/i2c@7000d000/tps6586x@34"; + rtc1 = "/rtc@7000e000"; + }; + memory { reg = <0x00000000 0x20000000>; }; - host1x { - hdmi { + host1x@50000000 { + hdmi@54280000 { vdd-supply = <&hdmi_vdd_reg>; pll-supply = <&hdmi_pll_reg>; @@ -19,7 +24,7 @@ }; }; - pinmux { + pinmux@70000014 { pinctrl-names = "default"; pinctrl-0 = <&state_default>; @@ -176,50 +181,50 @@ "gmb", "gmc", "gmd", "gme", "gpu7", "gpv", "i2cp", "pta", "rm", "slxa", "slxk", "spia", "spib", "uac"; - nvidia,pull = <0>; - nvidia,tristate = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; conf_ck32 { nvidia,pins = "ck32", "ddrc", "pmca", "pmcb", "pmcc", "pmcd", "pmce", "xm2c", "xm2d"; - nvidia,pull = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; }; conf_csus { nvidia,pins = "csus", "spid", "spif"; - nvidia,pull = <1>; - nvidia,tristate = <1>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; }; conf_crtp { nvidia,pins = "crtp", "dap2", "dap3", "dap4", "dtc", "dte", "dtf", "gpu", "sdio1", "slxc", "slxd", "spdi", "spdo", "spig", "uda"; - nvidia,pull = <0>; - nvidia,tristate = <1>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; }; conf_ddc { nvidia,pins = "ddc", "dta", "dtd", "kbca", "kbcb", "kbcc", "kbcd", "kbce", "kbcf", "sdc"; - nvidia,pull = <2>; - nvidia,tristate = <0>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; conf_hdint { nvidia,pins = "hdint", "lcsn", "ldc", "lm1", "lpw1", "lsc1", "lsck", "lsda", "lsdi", "lvp0", "owc", "sdb"; - nvidia,tristate = <1>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; }; conf_irrx { nvidia,pins = "irrx", "irtx", "sdd", "spic", "spie", "spih", "uaa", "uab", "uad", "uca", "ucb"; - nvidia,pull = <2>; - nvidia,tristate = <1>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; }; conf_lc { nvidia,pins = "lc", "ls"; - nvidia,pull = <2>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; }; conf_ld0 { nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4", @@ -229,12 +234,12 @@ "lhp1", "lhp2", "lhs", "lm0", "lpp", "lpw0", "lpw2", "lsc0", "lspi", "lvp1", "lvs", "pmc"; - nvidia,tristate = <0>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; conf_ld17_0 { nvidia,pins = "ld17_0", "ld19_18", "ld21_20", "ld23_22"; - nvidia,pull = <1>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; }; }; @@ -457,7 +462,7 @@ }; }; - pmc { + pmc@7000e400 { nvidia,invert-interrupt; nvidia,suspend-mode = <1>; nvidia,cpu-pwr-good-time = <5000>; @@ -467,7 +472,7 @@ nvidia,sys-clock-req-active-high; }; - pcie-controller { + pcie-controller@80003000 { pex-clk-supply = <&pci_clk_reg>; vdd-supply = <&pci_vdd_reg>; }; @@ -492,7 +497,7 @@ #address-cells = <1>; #size-cells = <0>; - clk32k_in: clock { + clk32k_in: clock@0 { compatible = "fixed-clock"; reg=<0>; #clock-cells = <0>; diff --git a/arch/arm/boot/dts/tegra20-tec.dts b/arch/arm/boot/dts/tegra20-tec.dts index 3ada3cb..890562c 100644 --- a/arch/arm/boot/dts/tegra20-tec.dts +++ b/arch/arm/boot/dts/tegra20-tec.dts @@ -6,8 +6,8 @@ model = "Avionic Design Tamonten Evaluation Carrier"; compatible = "ad,tec", "ad,tamonten", "nvidia,tegra20"; - host1x { - hdmi { + host1x@50000000 { + hdmi@54280000 { status = "okay"; }; }; @@ -32,7 +32,7 @@ }; }; - pcie-controller { + pcie-controller@80003000 { status = "okay"; pci@1,0 { diff --git a/arch/arm/boot/dts/tegra20-trimslice.dts b/arch/arm/boot/dts/tegra20-trimslice.dts index 78deea5..216fa6d 100644 --- a/arch/arm/boot/dts/tegra20-trimslice.dts +++ b/arch/arm/boot/dts/tegra20-trimslice.dts @@ -1,17 +1,23 @@ /dts-v1/; +#include <dt-bindings/input/input.h> #include "tegra20.dtsi" / { model = "Compulab TrimSlice board"; compatible = "compulab,trimslice", "nvidia,tegra20"; + aliases { + rtc0 = "/i2c@7000c500/rtc@56"; + rtc1 = "/rtc@7000e000"; + }; + memory { reg = <0x00000000 0x40000000>; }; - host1x { - hdmi { + host1x@50000000 { + hdmi@54280000 { status = "okay"; vdd-supply = <&hdmi_vdd_reg>; @@ -23,7 +29,7 @@ }; }; - pinmux { + pinmux@70000014 { pinctrl-names = "default"; pinctrl-0 = <&state_default>; @@ -191,49 +197,49 @@ "dtb", "dtc", "dtd", "dte", "gmb", "gme", "i2cp", "pta", "slxc", "slxd", "spdi", "spdo", "uda"; - nvidia,pull = <0>; - nvidia,tristate = <1>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; }; conf_atb { nvidia,pins = "atb", "cdev1", "cdev2", "dap1", "gma", "gmc", "gmd", "gpu", "gpu7", "gpv", "sdio1", "slxa", "slxk", "uac"; - nvidia,pull = <0>; - nvidia,tristate = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; conf_ck32 { nvidia,pins = "ck32", "ddrc", "pmca", "pmcb", "pmcc", "pmcd", "pmce", "xm2c", "xm2d"; - nvidia,pull = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; }; conf_csus { nvidia,pins = "csus", "spia", "spib", "spid", "spif"; - nvidia,pull = <1>; - nvidia,tristate = <1>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; }; conf_ddc { nvidia,pins = "ddc", "dtf", "rm", "sdc", "sdd"; - nvidia,pull = <2>; - nvidia,tristate = <0>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; conf_hdint { nvidia,pins = "hdint", "lcsn", "ldc", "lm1", "lpw1", "lsc1", "lsck", "lsda", "lsdi", "lvp0", "pmc"; - nvidia,tristate = <1>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; }; conf_irrx { nvidia,pins = "irrx", "irtx", "kbca", "kbcb", "kbcc", "kbcd", "kbce", "kbcf", "owc", "spic", "spie", "spig", "spih", "uaa", "uab", "uad", "uca", "ucb"; - nvidia,pull = <2>; - nvidia,tristate = <1>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; }; conf_lc { nvidia,pins = "lc", "ls"; - nvidia,pull = <2>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; }; conf_ld0 { nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4", @@ -243,17 +249,17 @@ "lhp1", "lhp2", "lhs", "lm0", "lpp", "lpw0", "lpw2", "lsc0", "lspi", "lvp1", "lvs", "sdb"; - nvidia,tristate = <0>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; conf_ld17_0 { nvidia,pins = "ld17_0", "ld19_18", "ld21_20", "ld23_22"; - nvidia,pull = <1>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; }; conf_spif { nvidia,pins = "spif"; - nvidia,pull = <1>; - nvidia,tristate = <0>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; }; }; @@ -301,7 +307,7 @@ }; }; - pmc { + pmc@7000e400 { nvidia,suspend-mode = <1>; nvidia,cpu-pwr-good-time = <5000>; nvidia,cpu-pwr-off-time = <5000>; @@ -310,7 +316,7 @@ nvidia,sys-clock-req-active-high; }; - pcie-controller { + pcie-controller@80003000 { status = "okay"; pex-clk-supply = <&pci_clk_reg>; vdd-supply = <&pci_vdd_reg>; @@ -366,7 +372,7 @@ #address-cells = <1>; #size-cells = <0>; - clk32k_in: clock { + clk32k_in: clock@0 { compatible = "fixed-clock"; reg=<0>; #clock-cells = <0>; @@ -380,7 +386,7 @@ power { label = "Power"; gpios = <&gpio TEGRA_GPIO(X, 6) GPIO_ACTIVE_LOW>; - linux,code = <116>; /* KEY_POWER */ + linux,code = <KEY_POWER>; gpio-key,wakeup; }; }; diff --git a/arch/arm/boot/dts/tegra20-ventana.dts b/arch/arm/boot/dts/tegra20-ventana.dts index aab872c..571d12e 100644 --- a/arch/arm/boot/dts/tegra20-ventana.dts +++ b/arch/arm/boot/dts/tegra20-ventana.dts @@ -1,17 +1,23 @@ /dts-v1/; +#include <dt-bindings/input/input.h> #include "tegra20.dtsi" / { model = "NVIDIA Tegra20 Ventana evaluation board"; compatible = "nvidia,ventana", "nvidia,tegra20"; + aliases { + rtc0 = "/i2c@7000d000/tps6586x@34"; + rtc1 = "/rtc@7000e000"; + }; + memory { reg = <0x00000000 0x40000000>; }; - host1x { - hdmi { + host1x@50000000 { + hdmi@54280000 { status = "okay"; vdd-supply = <&hdmi_vdd_reg>; @@ -23,7 +29,7 @@ }; }; - pinmux { + pinmux@70000014 { pinctrl-names = "default"; pinctrl-0 = <&state_default>; @@ -189,50 +195,50 @@ "irtx", "pta", "rm", "sdc", "sdd", "slxc", "slxd", "slxk", "spdi", "spdo", "uac", "uad", "uca", "ucb", "uda"; - nvidia,pull = <0>; - nvidia,tristate = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; conf_ate { nvidia,pins = "ate", "csus", "dap3", "gmd", "gpv", "owc", "spia", "spib", "spic", "spid", "spie", "spig"; - nvidia,pull = <0>; - nvidia,tristate = <1>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; }; conf_ck32 { nvidia,pins = "ck32", "ddrc", "pmca", "pmcb", "pmcc", "pmcd", "pmce", "xm2c", "xm2d"; - nvidia,pull = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; }; conf_crtp { nvidia,pins = "crtp", "gmb", "slxa", "spih"; - nvidia,pull = <2>; - nvidia,tristate = <1>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; }; conf_dta { nvidia,pins = "dta", "dtb", "dtc", "dtd"; - nvidia,pull = <1>; - nvidia,tristate = <0>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; conf_dte { nvidia,pins = "dte", "spif"; - nvidia,pull = <1>; - nvidia,tristate = <1>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; }; conf_hdint { nvidia,pins = "hdint", "lcsn", "ldc", "lm1", "lpw1", "lsck", "lsda", "lsdi", "lvp0"; - nvidia,tristate = <1>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; }; conf_kbca { nvidia,pins = "kbca", "kbcb", "kbcc", "kbcd", "kbce", "kbcf", "sdio1", "uaa", "uab"; - nvidia,pull = <2>; - nvidia,tristate = <0>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; conf_lc { nvidia,pins = "lc", "ls"; - nvidia,pull = <2>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; }; conf_ld0 { nvidia,pins = "ld0", "ld1", "ld2", "ld3", "ld4", @@ -242,22 +248,22 @@ "lhp1", "lhp2", "lhs", "lm0", "lpp", "lpw0", "lpw2", "lsc0", "lsc1", "lspi", "lvp1", "lvs", "pmc", "sdb"; - nvidia,tristate = <0>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; conf_ld17_0 { nvidia,pins = "ld17_0", "ld19_18", "ld21_20", "ld23_22"; - nvidia,pull = <1>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; }; drive_sdio1 { nvidia,pins = "drive_sdio1"; - nvidia,high-speed-mode = <0>; - nvidia,schmitt = <1>; - nvidia,low-power-mode = <3>; + nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>; + nvidia,schmitt = <TEGRA_PIN_ENABLE>; + nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_1>; nvidia,pull-down-strength = <31>; nvidia,pull-up-strength = <31>; - nvidia,slew-rate-rising = <3>; - nvidia,slew-rate-falling = <3>; + nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_SLOWEST>; + nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_SLOWEST>; }; }; @@ -492,7 +498,7 @@ }; }; - pmc { + pmc@7000e400 { nvidia,invert-interrupt; nvidia,suspend-mode = <1>; nvidia,cpu-pwr-good-time = <2000>; @@ -556,7 +562,7 @@ #address-cells = <1>; #size-cells = <0>; - clk32k_in: clock { + clk32k_in: clock@0 { compatible = "fixed-clock"; reg=<0>; #clock-cells = <0>; @@ -570,7 +576,7 @@ power { label = "Power"; gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>; - linux,code = <116>; /* KEY_POWER */ + linux,code = <KEY_POWER>; gpio-key,wakeup; }; }; diff --git a/arch/arm/boot/dts/tegra20-whistler.dts b/arch/arm/boot/dts/tegra20-whistler.dts index d33a73cf..1843725 100644 --- a/arch/arm/boot/dts/tegra20-whistler.dts +++ b/arch/arm/boot/dts/tegra20-whistler.dts @@ -1,17 +1,23 @@ /dts-v1/; +#include <dt-bindings/input/input.h> #include "tegra20.dtsi" / { model = "NVIDIA Tegra20 Whistler evaluation board"; compatible = "nvidia,whistler", "nvidia,tegra20"; + aliases { + rtc0 = "/i2c@7000d000/max8907@3c"; + rtc1 = "/rtc@7000e000"; + }; + memory { reg = <0x00000000 0x20000000>; }; - host1x { - hdmi { + host1x@50000000 { + hdmi@54280000 { status = "okay"; vdd-supply = <&hdmi_vdd_reg>; @@ -23,7 +29,7 @@ }; }; - pinmux { + pinmux@70000014 { pinctrl-names = "default"; pinctrl-0 = <&state_default>; @@ -189,8 +195,8 @@ "kbcf", "sdc", "sdd", "spie", "spig", "spih", "uaa", "uab", "uad", "uca", "ucb"; - nvidia,pull = <2>; - nvidia,tristate = <0>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; conf_atd { nvidia,pins = "atd", "ate", "cdev1", "csus", @@ -198,54 +204,54 @@ "dtf", "gpu", "gpu7", "gpv", "i2cp", "rm", "sdio1", "slxa", "slxc", "slxd", "slxk", "spdi", "spdo", "uac", "uda"; - nvidia,pull = <0>; - nvidia,tristate = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; conf_cdev2 { nvidia,pins = "cdev2", "spia", "spib"; - nvidia,pull = <1>; - nvidia,tristate = <1>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; }; conf_ck32 { nvidia,pins = "ck32", "ddrc", "lc", "pmca", "pmcb", "pmcc", "pmcd", "xm2c", "xm2d"; - nvidia,pull = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; }; conf_crtp { nvidia,pins = "crtp"; - nvidia,pull = <0>; - nvidia,tristate = <1>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; }; conf_dta { nvidia,pins = "dta", "dtb", "dtc", "dtd", "spid", "spif"; - nvidia,pull = <1>; - nvidia,tristate = <0>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; conf_gme { nvidia,pins = "gme", "owc", "pta", "spic"; - nvidia,pull = <2>; - nvidia,tristate = <1>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_ENABLE>; }; conf_ld17_0 { nvidia,pins = "ld17_0", "ld19_18", "ld21_20", "ld23_22"; - nvidia,pull = <1>; + nvidia,pull = <TEGRA_PIN_PULL_DOWN>; }; conf_ls { nvidia,pins = "ls", "pmce"; - nvidia,pull = <2>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; }; drive_dap1 { nvidia,pins = "drive_dap1"; - nvidia,high-speed-mode = <0>; - nvidia,schmitt = <1>; - nvidia,low-power-mode = <0>; + nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>; + nvidia,schmitt = <TEGRA_PIN_ENABLE>; + nvidia,low-power-mode = <TEGRA_PIN_LP_DRIVE_DIV_8>; nvidia,pull-down-strength = <0>; nvidia,pull-up-strength = <0>; - nvidia,slew-rate-rising = <0>; - nvidia,slew-rate-falling = <0>; + nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FASTEST>; + nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FASTEST>; }; }; }; @@ -495,7 +501,20 @@ }; }; - pmc { + kbc@7000e200 { + status = "okay"; + nvidia,debounce-delay-ms = <20>; + nvidia,repeat-delay-ms = <160>; + nvidia,kbc-row-pins = <0 1 2>; + nvidia,kbc-col-pins = <16 17>; + nvidia,wakeup-source; + linux,keymap = <MATRIX_KEY(0x00, 0x00, KEY_POWER) + MATRIX_KEY(0x01, 0x00, KEY_HOME) + MATRIX_KEY(0x01, 0x01, KEY_BACK) + MATRIX_KEY(0x02, 0x01, KEY_MENU)>; + }; + + pmc@7000e400 { nvidia,invert-interrupt; nvidia,suspend-mode = <1>; nvidia,cpu-pwr-good-time = <2000>; @@ -543,7 +562,7 @@ #address-cells = <1>; #size-cells = <0>; - clk32k_in: clock { + clk32k_in: clock@0 { compatible = "fixed-clock"; reg=<0>; #clock-cells = <0>; @@ -551,25 +570,12 @@ }; }; - kbc { - status = "okay"; - nvidia,debounce-delay-ms = <20>; - nvidia,repeat-delay-ms = <160>; - nvidia,kbc-row-pins = <0 1 2>; - nvidia,kbc-col-pins = <16 17>; - nvidia,wakeup-source; - linux,keymap = <0x00000074 /* KEY_POWER */ - 0x01000066 /* KEY_HOME */ - 0x0101009E /* KEY_BACK */ - 0x0201008B>; /* KEY_MENU */ - }; - regulators { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <0>; - usb0_vbus_reg: regulator { + usb0_vbus_reg: regulator@0 { compatible = "regulator-fixed"; reg = <0>; regulator-name = "usb0_vbus"; diff --git a/arch/arm/boot/dts/tegra20.dtsi b/arch/arm/boot/dts/tegra20.dtsi index c90d0aa..480ecda 100644 --- a/arch/arm/boot/dts/tegra20.dtsi +++ b/arch/arm/boot/dts/tegra20.dtsi @@ -1,5 +1,6 @@ #include <dt-bindings/clock/tegra20-car.h> #include <dt-bindings/gpio/tegra-gpio.h> +#include <dt-bindings/pinctrl/pinctrl-tegra.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include "skeleton.dtsi" @@ -16,7 +17,7 @@ serial4 = &uarte; }; - host1x { + host1x@50000000 { compatible = "nvidia,tegra20-host1x", "simple-bus"; reg = <0x50000000 0x00024000>; interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, /* syncpt */ @@ -30,7 +31,7 @@ ranges = <0x54000000 0x54000000 0x04000000>; - mpe { + mpe@54040000 { compatible = "nvidia,tegra20-mpe"; reg = <0x54040000 0x00040000>; interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; @@ -39,7 +40,7 @@ reset-names = "mpe"; }; - vi { + vi@54080000 { compatible = "nvidia,tegra20-vi"; reg = <0x54080000 0x00040000>; interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; @@ -48,7 +49,7 @@ reset-names = "vi"; }; - epp { + epp@540c0000 { compatible = "nvidia,tegra20-epp"; reg = <0x540c0000 0x00040000>; interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; @@ -57,7 +58,7 @@ reset-names = "epp"; }; - isp { + isp@54100000 { compatible = "nvidia,tegra20-isp"; reg = <0x54100000 0x00040000>; interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; @@ -66,7 +67,7 @@ reset-names = "isp"; }; - gr2d { + gr2d@54140000 { compatible = "nvidia,tegra20-gr2d"; reg = <0x54140000 0x00040000>; interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; @@ -75,9 +76,9 @@ reset-names = "2d"; }; - gr3d { + gr3d@54140000 { compatible = "nvidia,tegra20-gr3d"; - reg = <0x54180000 0x00040000>; + reg = <0x54140000 0x00040000>; clocks = <&tegra_car TEGRA20_CLK_GR3D>; resets = <&tegra_car 24>; reset-names = "3d"; @@ -113,7 +114,7 @@ }; }; - hdmi { + hdmi@54280000 { compatible = "nvidia,tegra20-hdmi"; reg = <0x54280000 0x00040000>; interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; @@ -125,7 +126,7 @@ status = "disabled"; }; - tvo { + tvo@542c0000 { compatible = "nvidia,tegra20-tvo"; reg = <0x542c0000 0x00040000>; interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; @@ -133,9 +134,9 @@ status = "disabled"; }; - dsi { + dsi@542c0000 { compatible = "nvidia,tegra20-dsi"; - reg = <0x54300000 0x00040000>; + reg = <0x542c0000 0x00040000>; clocks = <&tegra_car TEGRA20_CLK_DSI>; resets = <&tegra_car 48>; reset-names = "dsi"; @@ -151,7 +152,7 @@ clocks = <&tegra_car TEGRA20_CLK_TWD>; }; - intc: interrupt-controller { + intc: interrupt-controller@50041000 { compatible = "arm,cortex-a9-gic"; reg = <0x50041000 0x1000 0x50040100 0x0100>; @@ -159,7 +160,7 @@ #interrupt-cells = <3>; }; - cache-controller { + cache-controller@50043000 { compatible = "arm,pl310-cache"; reg = <0x50043000 0x1000>; arm,data-latency = <5 5 2>; @@ -178,14 +179,14 @@ clocks = <&tegra_car TEGRA20_CLK_TIMER>; }; - tegra_car: clock { + tegra_car: clock@60006000 { compatible = "nvidia,tegra20-car"; reg = <0x60006000 0x1000>; #clock-cells = <1>; #reset-cells = <1>; }; - apbdma: dma { + apbdma: dma@6000a000 { compatible = "nvidia,tegra20-apbdma"; reg = <0x6000a000 0x1200>; interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, @@ -210,12 +211,12 @@ #dma-cells = <1>; }; - ahb { + ahb@6000c004 { compatible = "nvidia,tegra20-ahb"; reg = <0x6000c004 0x10c>; /* AHB Arbitration + Gizmo Controller */ }; - gpio: gpio { + gpio: gpio@6000d000 { compatible = "nvidia,tegra20-gpio"; reg = <0x6000d000 0x1000>; interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, @@ -231,7 +232,7 @@ interrupt-controller; }; - pinmux: pinmux { + pinmux: pinmux@70000014 { compatible = "nvidia,tegra20-pinmux"; reg = <0x70000014 0x10 /* Tri-state registers */ 0x70000080 0x20 /* Mux registers */ @@ -239,12 +240,12 @@ 0x70000868 0xa8>; /* Pad control registers */ }; - das { + das@70000c00 { compatible = "nvidia,tegra20-das"; reg = <0x70000c00 0x80>; }; - tegra_ac97: ac97 { + tegra_ac97: ac97@70002000 { compatible = "nvidia,tegra20-ac97"; reg = <0x70002000 0x200>; interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>; @@ -352,7 +353,7 @@ status = "disabled"; }; - pwm: pwm { + pwm: pwm@7000a000 { compatible = "nvidia,tegra20-pwm"; reg = <0x7000a000 0x100>; #pwm-cells = <2>; @@ -362,7 +363,7 @@ status = "disabled"; }; - rtc { + rtc@7000e000 { compatible = "nvidia,tegra20-rtc"; reg = <0x7000e000 0x100>; interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; @@ -503,7 +504,7 @@ status = "disabled"; }; - kbc { + kbc@7000e200 { compatible = "nvidia,tegra20-kbc"; reg = <0x7000e200 0x100>; interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; @@ -513,7 +514,7 @@ status = "disabled"; }; - pmc { + pmc@7000e400 { compatible = "nvidia,tegra20-pmc"; reg = <0x7000e400 0x400>; clocks = <&tegra_car TEGRA20_CLK_PCLK>, <&clk32k_in>; @@ -527,7 +528,7 @@ interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; }; - iommu { + iommu@7000f024 { compatible = "nvidia,tegra20-gart"; reg = <0x7000f024 0x00000018 /* controller registers */ 0x58000000 0x02000000>; /* GART aperture */ @@ -540,7 +541,7 @@ #size-cells = <0>; }; - pcie-controller { + pcie-controller@80003000 { compatible = "nvidia,tegra20-pcie"; device_type = "pci"; reg = <0x80003000 0x00000800 /* PADS registers */ diff --git a/arch/arm/boot/dts/tegra30-beaver.dts b/arch/arm/boot/dts/tegra30-beaver.dts index 08cad69..e93fe45b 100644 --- a/arch/arm/boot/dts/tegra30-beaver.dts +++ b/arch/arm/boot/dts/tegra30-beaver.dts @@ -6,11 +6,16 @@ model = "NVIDIA Tegra30 Beaver evaluation board"; compatible = "nvidia,beaver", "nvidia,tegra30"; + aliases { + rtc0 = "/i2c@7000d000/tps65911@2d"; + rtc1 = "/rtc@7000e000"; + }; + memory { reg = <0x80000000 0x7ff00000>; }; - pcie-controller { + pcie-controller@00003000 { status = "okay"; pex-clk-supply = <&sys_3v3_pexs_reg>; vdd-supply = <&ldo1_reg>; @@ -31,8 +36,8 @@ }; }; - host1x { - hdmi { + host1x@50000000 { + hdmi@54280000 { status = "okay"; vdd-supply = <&sys_3v3_reg>; @@ -44,7 +49,7 @@ }; }; - pinmux { + pinmux@70000868 { pinctrl-names = "default"; pinctrl-0 = <&state_default>; @@ -52,8 +57,8 @@ sdmmc1_clk_pz0 { nvidia,pins = "sdmmc1_clk_pz0"; nvidia,function = "sdmmc1"; - nvidia,pull = <0>; - nvidia,tristate = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; sdmmc1_cmd_pz1 { nvidia,pins = "sdmmc1_cmd_pz1", @@ -62,14 +67,14 @@ "sdmmc1_dat2_py5", "sdmmc1_dat3_py4"; nvidia,function = "sdmmc1"; - nvidia,pull = <2>; - nvidia,tristate = <0>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; sdmmc3_clk_pa6 { nvidia,pins = "sdmmc3_clk_pa6"; nvidia,function = "sdmmc3"; - nvidia,pull = <0>; - nvidia,tristate = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; sdmmc3_cmd_pa7 { nvidia,pins = "sdmmc3_cmd_pa7", @@ -78,15 +83,15 @@ "sdmmc3_dat2_pb5", "sdmmc3_dat3_pb4"; nvidia,function = "sdmmc3"; - nvidia,pull = <2>; - nvidia,tristate = <0>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; sdmmc4_clk_pcc4 { nvidia,pins = "sdmmc4_clk_pcc4", "sdmmc4_rst_n_pcc3"; nvidia,function = "sdmmc4"; - nvidia,pull = <0>; - nvidia,tristate = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; sdmmc4_dat0_paa0 { nvidia,pins = "sdmmc4_dat0_paa0", @@ -98,8 +103,8 @@ "sdmmc4_dat6_paa6", "sdmmc4_dat7_paa7"; nvidia,function = "sdmmc4"; - nvidia,pull = <2>; - nvidia,tristate = <0>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; dap2_fs_pa2 { nvidia,pins = "dap2_fs_pa2", @@ -107,18 +112,18 @@ "dap2_din_pa4", "dap2_dout_pa5"; nvidia,function = "i2s1"; - nvidia,pull = <0>; - nvidia,tristate = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; pex_l1_prsnt_n_pdd4 { nvidia,pins = "pex_l1_prsnt_n_pdd4", "pex_l1_clkreq_n_pdd6"; - nvidia,pull = <2>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; }; sdio3 { nvidia,pins = "drive_sdio3"; - nvidia,high-speed-mode = <0>; - nvidia,schmitt = <0>; + nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>; + nvidia,schmitt = <TEGRA_PIN_DISABLE>; nvidia,pull-down-strength = <46>; nvidia,pull-up-strength = <42>; nvidia,slew-rate-rising = <1>; @@ -159,7 +164,7 @@ status = "okay"; clock-frequency = <100000>; - rt5640: rt5640 { + rt5640: rt5640@1c { compatible = "realtek,rt5640"; reg = <0x1c>; interrupt-parent = <&gpio>; @@ -168,19 +173,6 @@ <&gpio TEGRA_GPIO(X, 2) GPIO_ACTIVE_HIGH>; }; - tps62361 { - compatible = "ti,tps62361"; - reg = <0x60>; - - regulator-name = "tps62361-vout"; - regulator-min-microvolt = <500000>; - regulator-max-microvolt = <1500000>; - regulator-boot-on; - regulator-always-on; - ti,vsel0-state-high; - ti,vsel1-state-high; - }; - pmic: tps65911@2d { compatible = "ti,tps65911"; reg = <0x2d>; @@ -284,6 +276,19 @@ }; }; }; + + tps62361@60 { + compatible = "ti,tps62361"; + reg = <0x60>; + + regulator-name = "tps62361-vout"; + regulator-min-microvolt = <500000>; + regulator-max-microvolt = <1500000>; + regulator-boot-on; + regulator-always-on; + ti,vsel0-state-high; + ti,vsel1-state-high; + }; }; spi@7000da00 { @@ -296,13 +301,7 @@ }; }; - ahub { - i2s@70080400 { - status = "okay"; - }; - }; - - pmc { + pmc@7000e400 { status = "okay"; nvidia,invert-interrupt; nvidia,suspend-mode = <1>; @@ -314,6 +313,12 @@ nvidia,sys-clock-req-active-high; }; + ahub@70080000 { + i2s@70080400 { + status = "okay"; + }; + }; + sdhci@78000000 { status = "okay"; cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>; @@ -328,6 +333,15 @@ non-removable; }; + usb@7d004000 { + status = "okay"; + }; + + phy2: usb-phy@7d004000 { + vbus-supply = <&sys_3v3_reg>; + status = "okay"; + }; + usb@7d008000 { status = "okay"; }; @@ -342,7 +356,7 @@ #address-cells = <1>; #size-cells = <0>; - clk32k_in: clock { + clk32k_in: clock@0 { compatible = "fixed-clock"; reg=<0>; #clock-cells = <0>; @@ -350,6 +364,19 @@ }; }; + gpio-leds { + compatible = "gpio-leds"; + + gpled1 { + label = "LED1"; /* CR5A1 (blue) */ + gpios = <&gpio TEGRA_GPIO(L, 1) GPIO_ACTIVE_HIGH>; + }; + gpled2 { + label = "LED2"; /* CR4A2 (green) */ + gpios = <&gpio TEGRA_GPIO(L, 0) GPIO_ACTIVE_HIGH>; + }; + }; + regulators { compatible = "simple-bus"; #address-cells = <1>; @@ -453,19 +480,6 @@ }; }; - gpio-leds { - compatible = "gpio-leds"; - - gpled1 { - label = "LED1"; /* CR5A1 (blue) */ - gpios = <&gpio TEGRA_GPIO(L, 1) GPIO_ACTIVE_HIGH>; - }; - gpled2 { - label = "LED2"; /* CR4A2 (green) */ - gpios = <&gpio TEGRA_GPIO(L, 0) GPIO_ACTIVE_HIGH>; - }; - }; - sound { compatible = "nvidia,tegra-audio-rt5640-beaver", "nvidia,tegra-audio-rt5640"; diff --git a/arch/arm/boot/dts/tegra30-cardhu-a02.dts b/arch/arm/boot/dts/tegra30-cardhu-a02.dts index 1082c5e..c9bfedc 100644 --- a/arch/arm/boot/dts/tegra30-cardhu-a02.dts +++ b/arch/arm/boot/dts/tegra30-cardhu-a02.dts @@ -8,6 +8,13 @@ model = "NVIDIA Tegra30 Cardhu A02 evaluation board"; compatible = "nvidia,cardhu-a02", "nvidia,cardhu", "nvidia,tegra30"; + sdhci@78000400 { + status = "okay"; + power-gpios = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_HIGH>; + bus-width = <4>; + keep-power-in-suspend; + }; + regulators { compatible = "simple-bus"; #address-cells = <1>; @@ -83,12 +90,5 @@ gpio = <&gpio TEGRA_GPIO(K, 3) GPIO_ACTIVE_HIGH>; }; }; - - sdhci@78000400 { - status = "okay"; - power-gpios = <&gpio TEGRA_GPIO(D, 4) GPIO_ACTIVE_HIGH>; - bus-width = <4>; - keep-power-in-suspend; - }; }; diff --git a/arch/arm/boot/dts/tegra30-cardhu-a04.dts b/arch/arm/boot/dts/tegra30-cardhu-a04.dts index bf012bdd..fadf55e 100644 --- a/arch/arm/boot/dts/tegra30-cardhu-a04.dts +++ b/arch/arm/boot/dts/tegra30-cardhu-a04.dts @@ -8,6 +8,13 @@ model = "NVIDIA Tegra30 Cardhu A04 (A05, A06, A07) evaluation board"; compatible = "nvidia,cardhu-a04", "nvidia,cardhu", "nvidia,tegra30"; + sdhci@78000400 { + status = "okay"; + power-gpios = <&gpio TEGRA_GPIO(D, 3) GPIO_ACTIVE_HIGH>; + bus-width = <4>; + keep-power-in-suspend; + }; + regulators { compatible = "simple-bus"; #address-cells = <1>; @@ -95,11 +102,4 @@ gpio = <&gpio TEGRA_GPIO(DD, 0) GPIO_ACTIVE_HIGH>; }; }; - - sdhci@78000400 { - status = "okay"; - power-gpios = <&gpio TEGRA_GPIO(D, 3) GPIO_ACTIVE_HIGH>; - bus-width = <4>; - keep-power-in-suspend; - }; }; diff --git a/arch/arm/boot/dts/tegra30-cardhu.dtsi b/arch/arm/boot/dts/tegra30-cardhu.dtsi index 5ea7dfa..9104224 100644 --- a/arch/arm/boot/dts/tegra30-cardhu.dtsi +++ b/arch/arm/boot/dts/tegra30-cardhu.dtsi @@ -27,11 +27,16 @@ model = "NVIDIA Tegra30 Cardhu evaluation board"; compatible = "nvidia,cardhu", "nvidia,tegra30"; + aliases { + rtc0 = "/i2c@7000d000/tps6586x@34"; + rtc1 = "/rtc@7000e000"; + }; + memory { reg = <0x80000000 0x40000000>; }; - pcie-controller { + pcie-controller@00003000 { status = "okay"; pex-clk-supply = <&pex_hvdd_3v3_reg>; vdd-supply = <&ldo1_reg>; @@ -51,7 +56,17 @@ }; }; - pinmux { + host1x@50000000 { + dc@54200000 { + rgb { + status = "okay"; + + nvidia,panel = <&panel>; + }; + }; + }; + + pinmux@70000868 { pinctrl-names = "default"; pinctrl-0 = <&state_default>; @@ -59,8 +74,8 @@ sdmmc1_clk_pz0 { nvidia,pins = "sdmmc1_clk_pz0"; nvidia,function = "sdmmc1"; - nvidia,pull = <0>; - nvidia,tristate = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; sdmmc1_cmd_pz1 { nvidia,pins = "sdmmc1_cmd_pz1", @@ -69,14 +84,14 @@ "sdmmc1_dat2_py5", "sdmmc1_dat3_py4"; nvidia,function = "sdmmc1"; - nvidia,pull = <2>; - nvidia,tristate = <0>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; sdmmc3_clk_pa6 { nvidia,pins = "sdmmc3_clk_pa6"; nvidia,function = "sdmmc3"; - nvidia,pull = <0>; - nvidia,tristate = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; sdmmc3_cmd_pa7 { nvidia,pins = "sdmmc3_cmd_pa7", @@ -85,15 +100,15 @@ "sdmmc3_dat2_pb5", "sdmmc3_dat3_pb4"; nvidia,function = "sdmmc3"; - nvidia,pull = <2>; - nvidia,tristate = <0>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; sdmmc4_clk_pcc4 { nvidia,pins = "sdmmc4_clk_pcc4", "sdmmc4_rst_n_pcc3"; nvidia,function = "sdmmc4"; - nvidia,pull = <0>; - nvidia,tristate = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; sdmmc4_dat0_paa0 { nvidia,pins = "sdmmc4_dat0_paa0", @@ -105,8 +120,8 @@ "sdmmc4_dat6_paa6", "sdmmc4_dat7_paa7"; nvidia,function = "sdmmc4"; - nvidia,pull = <2>; - nvidia,tristate = <0>; + nvidia,pull = <TEGRA_PIN_PULL_UP>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; dap2_fs_pa2 { nvidia,pins = "dap2_fs_pa2", @@ -114,17 +129,17 @@ "dap2_din_pa4", "dap2_dout_pa5"; nvidia,function = "i2s1"; - nvidia,pull = <0>; - nvidia,tristate = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; sdio3 { nvidia,pins = "drive_sdio3"; - nvidia,high-speed-mode = <0>; - nvidia,schmitt = <0>; + nvidia,high-speed-mode = <TEGRA_PIN_DISABLE>; + nvidia,schmitt = <TEGRA_PIN_DISABLE>; nvidia,pull-down-strength = <46>; nvidia,pull-up-strength = <42>; - nvidia,slew-rate-rising = <1>; - nvidia,slew-rate-falling = <1>; + nvidia,slew-rate-rising = <TEGRA_PIN_SLEW_RATE_FAST>; + nvidia,slew-rate-falling = <TEGRA_PIN_SLEW_RATE_FAST>; }; uart3_txd_pw6 { nvidia,pins = "uart3_txd_pw6", @@ -132,8 +147,8 @@ "uart3_rts_n_pc0", "uart3_rxd_pw7"; nvidia,function = "uartc"; - nvidia,pull = <0>; - nvidia,tristate = <0>; + nvidia,pull = <TEGRA_PIN_PULL_NONE>; + nvidia,tristate = <TEGRA_PIN_DISABLE>; }; }; }; @@ -147,7 +162,11 @@ status = "okay"; }; - i2c@7000c000 { + pwm@7000a000 { + status = "okay"; + }; + + panelddc: i2c@7000c000 { status = "okay"; clock-frequency = <100000>; }; @@ -302,7 +321,7 @@ interrupts = <TEGRA_GPIO(CC, 2) IRQ_TYPE_LEVEL_LOW>; }; - tps62361 { + tps62361@60 { compatible = "ti,tps62361"; reg = <0x60>; @@ -326,13 +345,7 @@ }; }; - ahub { - i2s@70080400 { - status = "okay"; - }; - }; - - pmc { + pmc@7000e400 { status = "okay"; nvidia,invert-interrupt; nvidia,suspend-mode = <1>; @@ -344,6 +357,12 @@ nvidia,sys-clock-req-active-high; }; + ahub@70080000 { + i2s@70080400 { + status = "okay"; + }; + }; + sdhci@78000000 { status = "okay"; cd-gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>; @@ -367,12 +386,23 @@ status = "okay"; }; + backlight: backlight { + compatible = "pwm-backlight"; + + enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>; + power-supply = <&vdd_bl_reg>; + pwms = <&pwm 0 5000000>; + + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <6>; + }; + clocks { compatible = "simple-bus"; #address-cells = <1>; #size-cells = <0>; - clk32k_in: clock { + clk32k_in: clock@0 { compatible = "fixed-clock"; reg=<0>; #clock-cells = <0>; @@ -380,6 +410,16 @@ }; }; + panel: panel { + compatible = "chunghwa,claa101wb01", "simple-panel"; + ddc-i2c-bus = <&panelddc>; + + power-supply = <&vdd_pnl1_reg>; + enable-gpios = <&gpio TEGRA_GPIO(L, 2) GPIO_ACTIVE_HIGH>; + + backlight = <&backlight>; + }; + regulators { compatible = "simple-bus"; #address-cells = <1>; diff --git a/arch/arm/boot/dts/tegra30.dtsi b/arch/arm/boot/dts/tegra30.dtsi index 31259b0..ed8e770 100644 --- a/arch/arm/boot/dts/tegra30.dtsi +++ b/arch/arm/boot/dts/tegra30.dtsi @@ -1,5 +1,6 @@ #include <dt-bindings/clock/tegra30-car.h> #include <dt-bindings/gpio/tegra-gpio.h> +#include <dt-bindings/pinctrl/pinctrl-tegra.h> #include <dt-bindings/interrupt-controller/arm-gic.h> #include "skeleton.dtsi" @@ -16,7 +17,7 @@ serial4 = &uarte; }; - pcie-controller { + pcie-controller@00003000 { compatible = "nvidia,tegra30-pcie"; device_type = "pci"; reg = <0x00003000 0x00000800 /* PADS registers */ @@ -89,7 +90,7 @@ }; }; - host1x { + host1x@50000000 { compatible = "nvidia,tegra30-host1x", "simple-bus"; reg = <0x50000000 0x00024000>; interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>, /* syncpt */ @@ -103,7 +104,7 @@ ranges = <0x54000000 0x54000000 0x04000000>; - mpe { + mpe@54040000 { compatible = "nvidia,tegra30-mpe"; reg = <0x54040000 0x00040000>; interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>; @@ -112,7 +113,7 @@ reset-names = "mpe"; }; - vi { + vi@54080000 { compatible = "nvidia,tegra30-vi"; reg = <0x54080000 0x00040000>; interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>; @@ -121,7 +122,7 @@ reset-names = "vi"; }; - epp { + epp@540c0000 { compatible = "nvidia,tegra30-epp"; reg = <0x540c0000 0x00040000>; interrupts = <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>; @@ -130,7 +131,7 @@ reset-names = "epp"; }; - isp { + isp@54100000 { compatible = "nvidia,tegra30-isp"; reg = <0x54100000 0x00040000>; interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>; @@ -139,7 +140,7 @@ reset-names = "isp"; }; - gr2d { + gr2d@54140000 { compatible = "nvidia,tegra30-gr2d"; reg = <0x54140000 0x00040000>; interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>; @@ -148,7 +149,7 @@ clocks = <&tegra_car TEGRA30_CLK_GR2D>; }; - gr3d { + gr3d@54180000 { compatible = "nvidia,tegra30-gr3d"; reg = <0x54180000 0x00040000>; clocks = <&tegra_car TEGRA30_CLK_GR3D @@ -189,7 +190,7 @@ }; }; - hdmi { + hdmi@54280000 { compatible = "nvidia,tegra30-hdmi"; reg = <0x54280000 0x00040000>; interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>; @@ -201,7 +202,7 @@ status = "disabled"; }; - tvo { + tvo@542c0000 { compatible = "nvidia,tegra30-tvo"; reg = <0x542c0000 0x00040000>; interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_HIGH>; @@ -209,7 +210,7 @@ status = "disabled"; }; - dsi { + dsi@54300000 { compatible = "nvidia,tegra30-dsi"; reg = <0x54300000 0x00040000>; clocks = <&tegra_car TEGRA30_CLK_DSIA>; @@ -227,7 +228,7 @@ clocks = <&tegra_car TEGRA30_CLK_TWD>; }; - intc: interrupt-controller { + intc: interrupt-controller@50041000 { compatible = "arm,cortex-a9-gic"; reg = <0x50041000 0x1000 0x50040100 0x0100>; @@ -235,7 +236,7 @@ #interrupt-cells = <3>; }; - cache-controller { + cache-controller@50043000 { compatible = "arm,pl310-cache"; reg = <0x50043000 0x1000>; arm,data-latency = <6 6 2>; @@ -256,14 +257,14 @@ clocks = <&tegra_car TEGRA30_CLK_TIMER>; }; - tegra_car: clock { + tegra_car: clock@60006000 { compatible = "nvidia,tegra30-car"; reg = <0x60006000 0x1000>; #clock-cells = <1>; #reset-cells = <1>; }; - apbdma: dma { + apbdma: dma@6000a000 { compatible = "nvidia,tegra30-apbdma", "nvidia,tegra20-apbdma"; reg = <0x6000a000 0x1400>; interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, @@ -304,12 +305,12 @@ #dma-cells = <1>; }; - ahb: ahb { + ahb: ahb@6000c004 { compatible = "nvidia,tegra30-ahb"; reg = <0x6000c004 0x14c>; /* AHB Arbitration + Gizmo Controller */ }; - gpio: gpio { + gpio: gpio@6000d000 { compatible = "nvidia,tegra30-gpio"; reg = <0x6000d000 0x1000>; interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>, @@ -326,7 +327,7 @@ interrupt-controller; }; - pinmux: pinmux { + pinmux: pinmux@70000868 { compatible = "nvidia,tegra30-pinmux"; reg = <0x70000868 0xd4 /* Pad control registers */ 0x70003000 0x3e4>; /* Mux registers */ @@ -405,7 +406,7 @@ status = "disabled"; }; - pwm: pwm { + pwm: pwm@7000a000 { compatible = "nvidia,tegra30-pwm", "nvidia,tegra20-pwm"; reg = <0x7000a000 0x100>; #pwm-cells = <2>; @@ -415,7 +416,7 @@ status = "disabled"; }; - rtc { + rtc@7000e000 { compatible = "nvidia,tegra30-rtc", "nvidia,tegra20-rtc"; reg = <0x7000e000 0x100>; interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; @@ -586,7 +587,7 @@ status = "disabled"; }; - kbc { + kbc@7000e200 { compatible = "nvidia,tegra30-kbc", "nvidia,tegra20-kbc"; reg = <0x7000e200 0x100>; interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>; @@ -596,14 +597,14 @@ status = "disabled"; }; - pmc { + pmc@7000e400 { compatible = "nvidia,tegra30-pmc"; reg = <0x7000e400 0x400>; clocks = <&tegra_car TEGRA30_CLK_PCLK>, <&clk32k_in>; clock-names = "pclk", "clk32k_in"; }; - memory-controller { + memory-controller@7000f000 { compatible = "nvidia,tegra30-mc"; reg = <0x7000f000 0x010 0x7000f03c 0x1b4 @@ -612,7 +613,7 @@ interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; }; - iommu { + iommu@7000f010 { compatible = "nvidia,tegra30-smmu"; reg = <0x7000f010 0x02c 0x7000f1f0 0x010 @@ -622,7 +623,7 @@ nvidia,ahb = <&ahb>; }; - ahub { + ahub@70080000 { compatible = "nvidia,tegra30-ahub"; reg = <0x70080000 0x200 0x70080200 0x100>; @@ -784,7 +785,7 @@ compatible = "nvidia,tegra30-ehci", "usb-ehci"; reg = <0x7d004000 0x4000>; interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>; - phy_type = "ulpi"; + phy_type = "utmi"; clocks = <&tegra_car TEGRA30_CLK_USB2>; resets = <&tegra_car 58>; reset-names = "usb"; @@ -794,12 +795,23 @@ phy2: usb-phy@7d004000 { compatible = "nvidia,tegra30-usb-phy"; - reg = <0x7d004000 0x4000>; - phy_type = "ulpi"; + reg = <0x7d004000 0x4000 0x7d000000 0x4000>; + phy_type = "utmi"; clocks = <&tegra_car TEGRA30_CLK_USB2>, <&tegra_car TEGRA30_CLK_PLL_U>, - <&tegra_car TEGRA30_CLK_CDEV2>; - clock-names = "reg", "pll_u", "ulpi-link"; + <&tegra_car TEGRA30_CLK_USBD>; + clock-names = "reg", "pll_u", "utmi-pads"; + nvidia,hssync-start-delay = <9>; + nvidia,idle-wait-delay = <17>; + nvidia,elastic-limit = <16>; + nvidia,term-range-adj = <6>; + nvidia,xcvr-setup = <51>; + nvidia.xcvr-setup-use-fuses; + nvidia,xcvr-lsfslew = <2>; + nvidia,xcvr-lsrslew = <2>; + nvidia,xcvr-hsslew = <32>; + nvidia,hssquelch-level = <2>; + nvidia,hsdiscon-level = <5>; status = "disabled"; }; diff --git a/arch/arm/boot/dts/zynq-7000.dtsi b/arch/arm/boot/dts/zynq-7000.dtsi index e7f73b2..5d7681b 100644 --- a/arch/arm/boot/dts/zynq-7000.dtsi +++ b/arch/arm/boot/dts/zynq-7000.dtsi @@ -15,6 +15,25 @@ / { compatible = "xlnx,zynq-7000"; + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + compatible = "arm,cortex-a9"; + device_type = "cpu"; + reg = <0>; + clocks = <&clkc 3>; + }; + + cpu@1 { + compatible = "arm,cortex-a9"; + device_type = "cpu"; + reg = <1>; + clocks = <&clkc 3>; + }; + }; + pmu { compatible = "arm,cortex-a9-pmu"; interrupts = <0 5 4>, <0 6 4>; @@ -65,6 +84,24 @@ interrupts = <0 50 4>; }; + gem0: ethernet@e000b000 { + compatible = "cdns,gem"; + reg = <0xe000b000 0x4000>; + status = "disabled"; + interrupts = <0 22 4>; + clocks = <&clkc 30>, <&clkc 30>, <&clkc 13>; + clock-names = "pclk", "hclk", "tx_clk"; + }; + + gem1: ethernet@e000c000 { + compatible = "cdns,gem"; + reg = <0xe000c000 0x4000>; + status = "disabled"; + interrupts = <0 45 4>; + clocks = <&clkc 31>, <&clkc 31>, <&clkc 14>; + clock-names = "pclk", "hclk", "tx_clk"; + }; + slcr: slcr@f8000000 { compatible = "xlnx,zynq-slcr"; reg = <0xF8000000 0x1000>; @@ -106,7 +143,6 @@ compatible = "cdns,ttc"; clocks = <&clkc 6>; reg = <0xF8001000 0x1000>; - clock-ranges; }; ttc1: ttc1@f8002000 { @@ -115,7 +151,6 @@ compatible = "cdns,ttc"; clocks = <&clkc 6>; reg = <0xF8002000 0x1000>; - clock-ranges; }; scutimer: scutimer@f8f00600 { interrupt-parent = <&intc>; diff --git a/arch/arm/boot/dts/zynq-zc702.dts b/arch/arm/boot/dts/zynq-zc702.dts index 21aea99..34d680a 100644 --- a/arch/arm/boot/dts/zynq-zc702.dts +++ b/arch/arm/boot/dts/zynq-zc702.dts @@ -29,6 +29,11 @@ }; +&gem0 { + status = "okay"; + phy-mode = "rgmii"; +}; + &uart1 { status = "okay"; }; diff --git a/arch/arm/boot/dts/zynq-zc706.dts b/arch/arm/boot/dts/zynq-zc706.dts index 79009e0..b2835d5 100644 --- a/arch/arm/boot/dts/zynq-zc706.dts +++ b/arch/arm/boot/dts/zynq-zc706.dts @@ -30,6 +30,11 @@ }; +&gem0 { + status = "okay"; + phy-mode = "rgmii"; +}; + &uart1 { status = "okay"; }; diff --git a/arch/arm/boot/dts/zynq-zed.dts b/arch/arm/boot/dts/zynq-zed.dts index d6acf2b..2eda068 100644 --- a/arch/arm/boot/dts/zynq-zed.dts +++ b/arch/arm/boot/dts/zynq-zed.dts @@ -30,6 +30,11 @@ }; +&gem0 { + status = "okay"; + phy-mode = "rgmii"; +}; + &uart1 { status = "okay"; }; diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c index 473e21b..17c0fe6 100644 --- a/arch/arm/mach-integrator/integrator_ap.c +++ b/arch/arm/mach-integrator/integrator_ap.c @@ -63,6 +63,9 @@ /* Base address to the AP system controller */ void __iomem *ap_syscon_base; +/* Base address to the external bus interface */ +static void __iomem *ebi_base; + /* * All IO addresses are mapped onto VA 0xFFFx.xxxx, where x.xxxx @@ -72,15 +75,11 @@ void __iomem *ap_syscon_base; * just for now). */ #define VA_IC_BASE __io_address(INTEGRATOR_IC_BASE) -#define VA_EBI_BASE __io_address(INTEGRATOR_EBI_BASE) -#define VA_CMIC_BASE __io_address(INTEGRATOR_HDR_IC) /* * Logical Physical * ef000000 Cache flush - * f1000000 10000000 Core module registers * f1100000 11000000 System controller registers - * f1200000 12000000 EBI registers * f1300000 13000000 Counter/Timer * f1400000 14000000 Interrupt controller * f1600000 16000000 UART 0 @@ -91,16 +90,6 @@ void __iomem *ap_syscon_base; static struct map_desc ap_io_desc[] __initdata __maybe_unused = { { - .virtual = IO_ADDRESS(INTEGRATOR_HDR_BASE), - .pfn = __phys_to_pfn(INTEGRATOR_HDR_BASE), - .length = SZ_4K, - .type = MT_DEVICE - }, { - .virtual = IO_ADDRESS(INTEGRATOR_EBI_BASE), - .pfn = __phys_to_pfn(INTEGRATOR_EBI_BASE), - .length = SZ_4K, - .type = MT_DEVICE - }, { .virtual = IO_ADDRESS(INTEGRATOR_CT_BASE), .pfn = __phys_to_pfn(INTEGRATOR_CT_BASE), .length = SZ_4K, @@ -174,9 +163,6 @@ device_initcall(irq_syscore_init); /* * Flash handling. */ -#define EBI_CSR1 (VA_EBI_BASE + INTEGRATOR_EBI_CSR1_OFFSET) -#define EBI_LOCK (VA_EBI_BASE + INTEGRATOR_EBI_LOCK_OFFSET) - static int ap_flash_init(struct platform_device *dev) { u32 tmp; @@ -184,13 +170,15 @@ static int ap_flash_init(struct platform_device *dev) writel(INTEGRATOR_SC_CTRL_nFLVPPEN | INTEGRATOR_SC_CTRL_nFLWP, ap_syscon_base + INTEGRATOR_SC_CTRLC_OFFSET); - tmp = readl(EBI_CSR1) | INTEGRATOR_EBI_WRITE_ENABLE; - writel(tmp, EBI_CSR1); + tmp = readl(ebi_base + INTEGRATOR_EBI_CSR1_OFFSET) | + INTEGRATOR_EBI_WRITE_ENABLE; + writel(tmp, ebi_base + INTEGRATOR_EBI_CSR1_OFFSET); - if (!(readl(EBI_CSR1) & INTEGRATOR_EBI_WRITE_ENABLE)) { - writel(0xa05f, EBI_LOCK); - writel(tmp, EBI_CSR1); - writel(0, EBI_LOCK); + if (!(readl(ebi_base + INTEGRATOR_EBI_CSR1_OFFSET) + & INTEGRATOR_EBI_WRITE_ENABLE)) { + writel(0xa05f, ebi_base + INTEGRATOR_EBI_LOCK_OFFSET); + writel(tmp, ebi_base + INTEGRATOR_EBI_CSR1_OFFSET); + writel(0, ebi_base + INTEGRATOR_EBI_LOCK_OFFSET); } return 0; } @@ -202,13 +190,15 @@ static void ap_flash_exit(struct platform_device *dev) writel(INTEGRATOR_SC_CTRL_nFLVPPEN | INTEGRATOR_SC_CTRL_nFLWP, ap_syscon_base + INTEGRATOR_SC_CTRLC_OFFSET); - tmp = readl(EBI_CSR1) & ~INTEGRATOR_EBI_WRITE_ENABLE; - writel(tmp, EBI_CSR1); + tmp = readl(ebi_base + INTEGRATOR_EBI_CSR1_OFFSET) & + ~INTEGRATOR_EBI_WRITE_ENABLE; + writel(tmp, ebi_base + INTEGRATOR_EBI_CSR1_OFFSET); - if (readl(EBI_CSR1) & INTEGRATOR_EBI_WRITE_ENABLE) { - writel(0xa05f, EBI_LOCK); - writel(tmp, EBI_CSR1); - writel(0, EBI_LOCK); + if (readl(ebi_base + INTEGRATOR_EBI_CSR1_OFFSET) & + INTEGRATOR_EBI_WRITE_ENABLE) { + writel(0xa05f, ebi_base + INTEGRATOR_EBI_LOCK_OFFSET); + writel(tmp, ebi_base + INTEGRATOR_EBI_CSR1_OFFSET); + writel(0, ebi_base + INTEGRATOR_EBI_LOCK_OFFSET); } } @@ -475,11 +465,17 @@ static const struct of_device_id ap_syscon_match[] = { { }, }; +static const struct of_device_id ebi_match[] = { + { .compatible = "arm,external-bus-interface"}, + { }, +}; + static void __init ap_init_of(void) { unsigned long sc_dec; struct device_node *root; struct device_node *syscon; + struct device_node *ebi; struct device *parent; struct soc_device *soc_dev; struct soc_device_attribute *soc_dev_attr; @@ -495,10 +491,16 @@ static void __init ap_init_of(void) syscon = of_find_matching_node(root, ap_syscon_match); if (!syscon) return; + ebi = of_find_matching_node(root, ebi_match); + if (!ebi) + return; ap_syscon_base = of_iomap(syscon, 0); if (!ap_syscon_base) return; + ebi_base = of_iomap(ebi, 0); + if (!ebi_base) + return; ap_sc_id = readl(ap_syscon_base); diff --git a/arch/arm/mach-integrator/integrator_cp.c b/arch/arm/mach-integrator/integrator_cp.c index 4fc0a19..5e84149 100644 --- a/arch/arm/mach-integrator/integrator_cp.c +++ b/arch/arm/mach-integrator/integrator_cp.c @@ -64,9 +64,6 @@ static void __iomem *intcp_con_base; /* * Logical Physical - * f1000000 10000000 Core module registers - * f1100000 11000000 System controller registers - * f1200000 12000000 EBI registers * f1300000 13000000 Counter/Timer * f1400000 14000000 Interrupt controller * f1600000 16000000 UART 0 @@ -74,21 +71,10 @@ static void __iomem *intcp_con_base; * f1a00000 1a000000 Debug LEDs * fc900000 c9000000 GPIO * fca00000 ca000000 SIC - * fcb00000 cb000000 CP system control */ static struct map_desc intcp_io_desc[] __initdata __maybe_unused = { { - .virtual = IO_ADDRESS(INTEGRATOR_HDR_BASE), - .pfn = __phys_to_pfn(INTEGRATOR_HDR_BASE), - .length = SZ_4K, - .type = MT_DEVICE - }, { - .virtual = IO_ADDRESS(INTEGRATOR_EBI_BASE), - .pfn = __phys_to_pfn(INTEGRATOR_EBI_BASE), - .length = SZ_4K, - .type = MT_DEVICE - }, { .virtual = IO_ADDRESS(INTEGRATOR_CT_BASE), .pfn = __phys_to_pfn(INTEGRATOR_CT_BASE), .length = SZ_4K, diff --git a/arch/arm/mach-nomadik/cpu-8815.c b/arch/arm/mach-nomadik/cpu-8815.c index cce2c9d..4a1065e 100644 --- a/arch/arm/mach-nomadik/cpu-8815.c +++ b/arch/arm/mach-nomadik/cpu-8815.c @@ -110,38 +110,6 @@ static void cpu8815_restart(enum reboot_mode mode, const char *cmd) } /* - * The SMSC911x IRQ is connected to a GPIO pin, but the driver expects - * to simply request an IRQ passed as a resource. So the GPIO pin needs - * to be requested by this hog and set as input. - */ -static int __init cpu8815_eth_init(void) -{ - struct device_node *eth; - int gpio, irq, err; - - eth = of_find_node_by_path("/usb-s8815/ethernet-gpio"); - if (!eth) { - pr_info("could not find any ethernet GPIO\n"); - return 0; - } - gpio = of_get_gpio(eth, 0); - err = gpio_request(gpio, "eth_irq"); - if (err) { - pr_info("failed to request ethernet GPIO\n"); - return -ENODEV; - } - err = gpio_direction_input(gpio); - if (err) { - pr_info("failed to set ethernet GPIO as input\n"); - return -ENODEV; - } - irq = gpio_to_irq(gpio); - pr_info("enabled USB-S8815 ethernet GPIO %d, IRQ %d\n", gpio, irq); - return 0; -} -device_initcall(cpu8815_eth_init); - -/* * This GPIO pin turns on a line that is used to detect card insertion * on this board. */ diff --git a/arch/arm/mach-shmobile/board-bockw-reference.c b/arch/arm/mach-shmobile/board-bockw-reference.c index 1687df9..875cf3f 100644 --- a/arch/arm/mach-shmobile/board-bockw-reference.c +++ b/arch/arm/mach-shmobile/board-bockw-reference.c @@ -27,14 +27,6 @@ * see board-bock.c for checking detail of dip-switch */ -static const struct pinctrl_map bockw_pinctrl_map[] = { - /* SCIF0 */ - PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.0", "pfc-r8a7778", - "scif0_data_a", "scif0"), - PIN_MAP_MUX_GROUP_DEFAULT("sh-sci.0", "pfc-r8a7778", - "scif0_ctrl", "scif0"), -}; - #define FPGA 0x18200000 #define IRQ0MR 0x30 #define COMCTLR 0x101c @@ -44,10 +36,6 @@ static void __init bockw_init(void) r8a7778_clock_init(); r8a7778_init_irq_extpin_dt(1); - - pinctrl_register_mappings(bockw_pinctrl_map, - ARRAY_SIZE(bockw_pinctrl_map)); - r8a7778_pinmux_init(); r8a7778_add_dt_devices(); fpga = ioremap_nocache(FPGA, SZ_1M); diff --git a/arch/arm/mach-shmobile/board-marzen.c b/arch/arm/mach-shmobile/board-marzen.c index 4f9e3ec..d832a44 100644 --- a/arch/arm/mach-shmobile/board-marzen.c +++ b/arch/arm/mach-shmobile/board-marzen.c @@ -347,8 +347,6 @@ static const struct pinctrl_map marzen_pinctrl_map[] = { "sdhi0_ctrl", "sdhi0"), PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7779", "sdhi0_cd", "sdhi0"), - PIN_MAP_MUX_GROUP_DEFAULT("sh_mobile_sdhi.0", "pfc-r8a7779", - "sdhi0_wp", "sdhi0"), /* SMSC */ PIN_MAP_MUX_GROUP_DEFAULT("smsc911x", "pfc-r8a7779", "intc_irq1_b", "intc"), diff --git a/arch/arm/mach-shmobile/clock-r8a73a4.c b/arch/arm/mach-shmobile/clock-r8a73a4.c index 571409b..7348d58 100644 --- a/arch/arm/mach-shmobile/clock-r8a73a4.c +++ b/arch/arm/mach-shmobile/clock-r8a73a4.c @@ -584,15 +584,15 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("rcar_thermal", &mstp_clks[MSTP522]), CLKDEV_DEV_ID("e6520000.i2c", &mstp_clks[MSTP300]), CLKDEV_DEV_ID("sh_mmcif.1", &mstp_clks[MSTP305]), - CLKDEV_DEV_ID("ee220000.mmcif", &mstp_clks[MSTP305]), + CLKDEV_DEV_ID("ee220000.mmc", &mstp_clks[MSTP305]), CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP312]), - CLKDEV_DEV_ID("ee140000.sdhi", &mstp_clks[MSTP312]), + CLKDEV_DEV_ID("ee140000.sd", &mstp_clks[MSTP312]), CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]), - CLKDEV_DEV_ID("ee120000.sdhi", &mstp_clks[MSTP313]), + CLKDEV_DEV_ID("ee120000.sd", &mstp_clks[MSTP313]), CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]), - CLKDEV_DEV_ID("ee100000.sdhi", &mstp_clks[MSTP314]), + CLKDEV_DEV_ID("ee100000.sd", &mstp_clks[MSTP314]), CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP315]), - CLKDEV_DEV_ID("ee200000.mmcif", &mstp_clks[MSTP315]), + CLKDEV_DEV_ID("ee200000.mmc", &mstp_clks[MSTP315]), CLKDEV_DEV_ID("e6550000.i2c", &mstp_clks[MSTP316]), CLKDEV_DEV_ID("e6560000.i2c", &mstp_clks[MSTP317]), CLKDEV_DEV_ID("e6500000.i2c", &mstp_clks[MSTP318]), diff --git a/arch/arm/mach-shmobile/clock-r8a7740.c b/arch/arm/mach-shmobile/clock-r8a7740.c index e9a3c64..dd989f9 100644 --- a/arch/arm/mach-shmobile/clock-r8a7740.c +++ b/arch/arm/mach-shmobile/clock-r8a7740.c @@ -590,18 +590,18 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("e6c20000.i2c", &mstp_clks[MSTP323]), CLKDEV_DEV_ID("renesas_usbhs", &mstp_clks[MSTP320]), CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]), - CLKDEV_DEV_ID("e6850000.sdhi", &mstp_clks[MSTP314]), + CLKDEV_DEV_ID("e6850000.sd", &mstp_clks[MSTP314]), CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]), - CLKDEV_DEV_ID("e6860000.sdhi", &mstp_clks[MSTP313]), + CLKDEV_DEV_ID("e6860000.sd", &mstp_clks[MSTP313]), CLKDEV_DEV_ID("sh_mmcif", &mstp_clks[MSTP312]), - CLKDEV_DEV_ID("e6bd0000.mmcif", &mstp_clks[MSTP312]), + CLKDEV_DEV_ID("e6bd0000.mmc", &mstp_clks[MSTP312]), CLKDEV_DEV_ID("r8a7740-gether", &mstp_clks[MSTP309]), CLKDEV_DEV_ID("e9a00000.sh-eth", &mstp_clks[MSTP309]), CLKDEV_DEV_ID("renesas-tpu-pwm", &mstp_clks[MSTP304]), CLKDEV_DEV_ID("e6600000.pwm", &mstp_clks[MSTP304]), CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP415]), - CLKDEV_DEV_ID("e6870000.sdhi", &mstp_clks[MSTP415]), + CLKDEV_DEV_ID("e6870000.sd", &mstp_clks[MSTP415]), /* ICK */ CLKDEV_ICK_ID("host", "renesas_usbhs", &mstp_clks[MSTP416]), diff --git a/arch/arm/mach-shmobile/clock-r8a7778.c b/arch/arm/mach-shmobile/clock-r8a7778.c index dfb0fff..9783945 100644 --- a/arch/arm/mach-shmobile/clock-r8a7778.c +++ b/arch/arm/mach-shmobile/clock-r8a7778.c @@ -184,13 +184,13 @@ static struct clk_lookup lookups[] = { /* MSTP32 clocks */ CLKDEV_DEV_ID("sh_mmcif", &mstp_clks[MSTP331]), /* MMC */ - CLKDEV_DEV_ID("ffe4e000.mmcif", &mstp_clks[MSTP331]), /* MMC */ + CLKDEV_DEV_ID("ffe4e000.mmc", &mstp_clks[MSTP331]), /* MMC */ CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP323]), /* SDHI0 */ - CLKDEV_DEV_ID("ffe4c000.sdhi", &mstp_clks[MSTP323]), /* SDHI0 */ + CLKDEV_DEV_ID("ffe4c000.sd", &mstp_clks[MSTP323]), /* SDHI0 */ CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP322]), /* SDHI1 */ - CLKDEV_DEV_ID("ffe4d000.sdhi", &mstp_clks[MSTP322]), /* SDHI1 */ + CLKDEV_DEV_ID("ffe4d000.sd", &mstp_clks[MSTP322]), /* SDHI1 */ CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP321]), /* SDHI2 */ - CLKDEV_DEV_ID("ffe4f000.sdhi", &mstp_clks[MSTP321]), /* SDHI2 */ + CLKDEV_DEV_ID("ffe4f000.sd", &mstp_clks[MSTP321]), /* SDHI2 */ CLKDEV_DEV_ID("r8a777x-ether", &mstp_clks[MSTP114]), /* Ether */ CLKDEV_DEV_ID("r8a7778-vin.0", &mstp_clks[MSTP110]), /* VIN0 */ CLKDEV_DEV_ID("r8a7778-vin.1", &mstp_clks[MSTP109]), /* VIN1 */ diff --git a/arch/arm/mach-shmobile/clock-r8a7779.c b/arch/arm/mach-shmobile/clock-r8a7779.c index b545c8d..f1fb89b 100644 --- a/arch/arm/mach-shmobile/clock-r8a7779.c +++ b/arch/arm/mach-shmobile/clock-r8a7779.c @@ -204,13 +204,13 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("sh-hspi.2", &mstp_clks[MSTP007]), /* HSPI2 */ CLKDEV_DEV_ID("fffc6000.spi", &mstp_clks[MSTP007]), /* HSPI2 */ CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP323]), /* SDHI0 */ - CLKDEV_DEV_ID("ffe4c000.sdhi", &mstp_clks[MSTP323]), /* SDHI0 */ + CLKDEV_DEV_ID("ffe4c000.sd", &mstp_clks[MSTP323]), /* SDHI0 */ CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP322]), /* SDHI1 */ - CLKDEV_DEV_ID("ffe4d000.sdhi", &mstp_clks[MSTP322]), /* SDHI1 */ + CLKDEV_DEV_ID("ffe4d000.sd", &mstp_clks[MSTP322]), /* SDHI1 */ CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP321]), /* SDHI2 */ - CLKDEV_DEV_ID("ffe4e000.sdhi", &mstp_clks[MSTP321]), /* SDHI2 */ + CLKDEV_DEV_ID("ffe4e000.sd", &mstp_clks[MSTP321]), /* SDHI2 */ CLKDEV_DEV_ID("sh_mobile_sdhi.3", &mstp_clks[MSTP320]), /* SDHI3 */ - CLKDEV_DEV_ID("ffe4f000.sdhi", &mstp_clks[MSTP320]), /* SDHI3 */ + CLKDEV_DEV_ID("ffe4f000.sd", &mstp_clks[MSTP320]), /* SDHI3 */ CLKDEV_DEV_ID("rcar-du-r8a7779", &mstp_clks[MSTP103]), /* DU */ }; diff --git a/arch/arm/mach-shmobile/clock-r8a7790.c b/arch/arm/mach-shmobile/clock-r8a7790.c index 3055244..f44987a 100644 --- a/arch/arm/mach-shmobile/clock-r8a7790.c +++ b/arch/arm/mach-shmobile/clock-r8a7790.c @@ -302,17 +302,17 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("r8a7790-ether", &mstp_clks[MSTP813]), CLKDEV_DEV_ID("e61f0000.thermal", &mstp_clks[MSTP522]), CLKDEV_DEV_ID("rcar_thermal", &mstp_clks[MSTP522]), - CLKDEV_DEV_ID("ee200000.mmcif", &mstp_clks[MSTP315]), + CLKDEV_DEV_ID("ee200000.mmc", &mstp_clks[MSTP315]), CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP315]), - CLKDEV_DEV_ID("ee100000.sdhi", &mstp_clks[MSTP314]), + CLKDEV_DEV_ID("ee100000.sd", &mstp_clks[MSTP314]), CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]), - CLKDEV_DEV_ID("ee120000.sdhi", &mstp_clks[MSTP313]), + CLKDEV_DEV_ID("ee120000.sd", &mstp_clks[MSTP313]), CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]), - CLKDEV_DEV_ID("ee140000.sdhi", &mstp_clks[MSTP312]), + CLKDEV_DEV_ID("ee140000.sd", &mstp_clks[MSTP312]), CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP312]), - CLKDEV_DEV_ID("ee160000.sdhi", &mstp_clks[MSTP311]), + CLKDEV_DEV_ID("ee160000.sd", &mstp_clks[MSTP311]), CLKDEV_DEV_ID("sh_mobile_sdhi.3", &mstp_clks[MSTP311]), - CLKDEV_DEV_ID("ee220000.mmcif", &mstp_clks[MSTP305]), + CLKDEV_DEV_ID("ee220000.mmc", &mstp_clks[MSTP305]), CLKDEV_DEV_ID("sh_mmcif.1", &mstp_clks[MSTP305]), CLKDEV_DEV_ID("sh_cmt.0", &mstp_clks[MSTP124]), CLKDEV_DEV_ID("qspi.0", &mstp_clks[MSTP917]), diff --git a/arch/arm/mach-shmobile/clock-sh73a0.c b/arch/arm/mach-shmobile/clock-sh73a0.c index 87e349d..23edf83 100644 --- a/arch/arm/mach-shmobile/clock-sh73a0.c +++ b/arch/arm/mach-shmobile/clock-sh73a0.c @@ -658,13 +658,13 @@ static struct clk_lookup lookups[] = { CLKDEV_DEV_ID("e6822000.i2c", &mstp_clks[MSTP323]), /* I2C1 */ CLKDEV_DEV_ID("renesas_usbhs", &mstp_clks[MSTP322]), /* USB */ CLKDEV_DEV_ID("sh_mobile_sdhi.0", &mstp_clks[MSTP314]), /* SDHI0 */ - CLKDEV_DEV_ID("ee100000.sdhi", &mstp_clks[MSTP314]), /* SDHI0 */ + CLKDEV_DEV_ID("ee100000.sd", &mstp_clks[MSTP314]), /* SDHI0 */ CLKDEV_DEV_ID("sh_mobile_sdhi.1", &mstp_clks[MSTP313]), /* SDHI1 */ - CLKDEV_DEV_ID("ee120000.sdhi", &mstp_clks[MSTP313]), /* SDHI1 */ + CLKDEV_DEV_ID("ee120000.sd", &mstp_clks[MSTP313]), /* SDHI1 */ CLKDEV_DEV_ID("sh_mmcif.0", &mstp_clks[MSTP312]), /* MMCIF0 */ - CLKDEV_DEV_ID("e6bd0000.mmcif", &mstp_clks[MSTP312]), /* MMCIF0 */ + CLKDEV_DEV_ID("e6bd0000.mmc", &mstp_clks[MSTP312]), /* MMCIF0 */ CLKDEV_DEV_ID("sh_mobile_sdhi.2", &mstp_clks[MSTP311]), /* SDHI2 */ - CLKDEV_DEV_ID("ee140000.sdhi", &mstp_clks[MSTP311]), /* SDHI2 */ + CLKDEV_DEV_ID("ee140000.sd", &mstp_clks[MSTP311]), /* SDHI2 */ CLKDEV_DEV_ID("renesas-tpu-pwm.0", &mstp_clks[MSTP304]), /* TPU0 */ CLKDEV_DEV_ID("renesas-tpu-pwm.1", &mstp_clks[MSTP303]), /* TPU1 */ CLKDEV_DEV_ID("renesas-tpu-pwm.2", &mstp_clks[MSTP302]), /* TPU2 */ diff --git a/arch/arm/mach-ux500/Makefile b/arch/arm/mach-ux500/Makefile index 616b96e..d05ba75 100644 --- a/arch/arm/mach-ux500/Makefile +++ b/arch/arm/mach-ux500/Makefile @@ -2,10 +2,10 @@ # Makefile for the linux kernel, U8500 machine. # -obj-y := cpu.o devices.o id.o timer.o pm.o +obj-y := cpu.o id.o timer.o pm.o obj-$(CONFIG_CACHE_L2X0) += cache-l2x0.o -obj-$(CONFIG_UX500_SOC_DB8500) += cpu-db8500.o devices-db8500.o -obj-$(CONFIG_MACH_MOP500) += board-mop500.o board-mop500-sdi.o \ +obj-$(CONFIG_UX500_SOC_DB8500) += cpu-db8500.o +obj-$(CONFIG_MACH_MOP500) += board-mop500-sdi.o \ board-mop500-regulators.o \ board-mop500-pins.o \ board-mop500-audio.o diff --git a/arch/arm/mach-ux500/board-mop500-audio.c b/arch/arm/mach-ux500/board-mop500-audio.c index 43d6cb8..9309ad4 100644 --- a/arch/arm/mach-ux500/board-mop500-audio.c +++ b/arch/arm/mach-ux500/board-mop500-audio.c @@ -7,16 +7,13 @@ #include <linux/platform_device.h> #include <linux/init.h> #include <linux/gpio.h> -#include <linux/platform_data/pinctrl-nomadik.h> #include <linux/platform_data/dma-ste-dma40.h> -#include "devices.h" #include "irqs.h" #include <linux/platform_data/asoc-ux500-msp.h> #include "ste-dma40-db8500.h" #include "board-mop500.h" -#include "devices-db8500.h" static struct stedma40_chan_cfg msp0_dma_rx = { .high_priority = true, diff --git a/arch/arm/mach-ux500/board-mop500-pins.c b/arch/arm/mach-ux500/board-mop500-pins.c index 0efb156..f63619b 100644 --- a/arch/arm/mach-ux500/board-mop500-pins.c +++ b/arch/arm/mach-ux500/board-mop500-pins.c @@ -10,94 +10,18 @@ #include <linux/string.h> #include <linux/pinctrl/machine.h> #include <linux/pinctrl/pinconf-generic.h> -#include <linux/platform_data/pinctrl-nomadik.h> #include <asm/mach-types.h> #include "board-mop500.h" -enum custom_pin_cfg_t { - PINS_FOR_DEFAULT, - PINS_FOR_U9500, -}; - -static enum custom_pin_cfg_t pinsfor; - /* These simply sets bias for pins */ #define BIAS(a,b) static unsigned long a[] = { b } -BIAS(pd, PIN_PULL_DOWN); -BIAS(in_nopull, PIN_INPUT_NOPULL); -BIAS(in_nopull_slpm_nowkup, PIN_INPUT_NOPULL|PIN_SLPM_WAKEUP_DISABLE); -BIAS(in_pu, PIN_INPUT_PULLUP); -BIAS(in_pd, PIN_INPUT_PULLDOWN); -BIAS(out_hi, PIN_OUTPUT_HIGH); -BIAS(out_lo, PIN_OUTPUT_LOW); -BIAS(out_lo_slpm_nowkup, PIN_OUTPUT_LOW|PIN_SLPM_WAKEUP_DISABLE); - BIAS(abx500_out_lo, PIN_CONF_PACKED(PIN_CONFIG_OUTPUT, 0)); BIAS(abx500_in_pd, PIN_CONF_PACKED(PIN_CONFIG_BIAS_PULL_DOWN, 1)); BIAS(abx500_in_nopull, PIN_CONF_PACKED(PIN_CONFIG_BIAS_PULL_DOWN, 0)); -/* These also force them into GPIO mode */ -BIAS(gpio_in_pu, PIN_INPUT_PULLUP|PIN_GPIOMODE_ENABLED); -BIAS(gpio_in_pd, PIN_INPUT_PULLDOWN|PIN_GPIOMODE_ENABLED); -BIAS(gpio_in_pu_slpm_gpio_nopull, PIN_INPUT_PULLUP|PIN_GPIOMODE_ENABLED|PIN_SLPM_GPIO|PIN_SLPM_INPUT_NOPULL); -BIAS(gpio_in_pd_slpm_gpio_nopull, PIN_INPUT_PULLDOWN|PIN_GPIOMODE_ENABLED|PIN_SLPM_GPIO|PIN_SLPM_INPUT_NOPULL); -BIAS(gpio_out_hi, PIN_OUTPUT_HIGH|PIN_GPIOMODE_ENABLED); -BIAS(gpio_out_lo, PIN_OUTPUT_LOW|PIN_GPIOMODE_ENABLED); -/* Sleep modes */ -BIAS(slpm_in_wkup_pdis, PIN_SLEEPMODE_ENABLED| - PIN_SLPM_DIR_INPUT|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED); -BIAS(slpm_in_wkup_pdis_en, PIN_SLEEPMODE_ENABLED| - PIN_SLPM_DIR_INPUT|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_ENABLED); -BIAS(slpm_wkup_pdis, PIN_SLEEPMODE_ENABLED| - PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED); -BIAS(slpm_wkup_pdis_en, PIN_SLEEPMODE_ENABLED| - PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_ENABLED); -BIAS(slpm_out_lo_pdis, PIN_SLEEPMODE_ENABLED| - PIN_SLPM_OUTPUT_LOW|PIN_SLPM_WAKEUP_DISABLE|PIN_SLPM_PDIS_DISABLED); -BIAS(slpm_out_lo_wkup_pdis, PIN_SLEEPMODE_ENABLED| - PIN_SLPM_OUTPUT_LOW|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED); -BIAS(slpm_out_hi_wkup_pdis, PIN_SLEEPMODE_ENABLED|PIN_SLPM_OUTPUT_HIGH| - PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED); -BIAS(slpm_in_nopull_wkup_pdis, PIN_SLEEPMODE_ENABLED| - PIN_SLPM_INPUT_NOPULL|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED); -BIAS(slpm_in_pu_wkup_pdis_en, PIN_SLEEPMODE_ENABLED|PIN_SLPM_INPUT_PULLUP| - PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_ENABLED); -BIAS(slpm_out_wkup_pdis, PIN_SLEEPMODE_ENABLED| - PIN_SLPM_DIR_OUTPUT|PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED); -BIAS(out_lo_wkup_pdis, PIN_SLPM_OUTPUT_LOW| - PIN_SLPM_WAKEUP_ENABLE|PIN_SLPM_PDIS_DISABLED); -BIAS(in_wkup_pdis_en, PIN_SLPM_DIR_INPUT|PIN_SLPM_WAKEUP_ENABLE| - PIN_SLPM_PDIS_ENABLED); -BIAS(in_wkup_pdis, PIN_SLPM_DIR_INPUT|PIN_SLPM_WAKEUP_ENABLE| - PIN_SLPM_PDIS_DISABLED); -BIAS(out_wkup_pdis, PIN_SLPM_DIR_OUTPUT|PIN_SLPM_WAKEUP_ENABLE| - PIN_SLPM_PDIS_DISABLED); - -/* We use these to define hog settings that are always done on boot */ -#define DB8500_MUX_HOG(group,func) \ - PIN_MAP_MUX_GROUP_HOG_DEFAULT("pinctrl-db8500", group, func) -#define DB8500_PIN_HOG(pin,conf) \ - PIN_MAP_CONFIGS_PIN_HOG_DEFAULT("pinctrl-db8500", pin, conf) - -/* These are default states associated with device and changed runtime */ -#define DB8500_MUX(group,func,dev) \ - PIN_MAP_MUX_GROUP_DEFAULT(dev, "pinctrl-db8500", group, func) -#define DB8500_PIN(pin,conf,dev) \ - PIN_MAP_CONFIGS_PIN_DEFAULT(dev, "pinctrl-db8500", pin, conf) -#define DB8500_PIN_IDLE(pin, conf, dev) \ - PIN_MAP_CONFIGS_PIN(dev, PINCTRL_STATE_IDLE, "pinctrl-db8500", \ - pin, conf) -#define DB8500_PIN_SLEEP(pin, conf, dev) \ - PIN_MAP_CONFIGS_PIN(dev, PINCTRL_STATE_SLEEP, "pinctrl-db8500", \ - pin, conf) -#define DB8500_MUX_STATE(group, func, dev, state) \ - PIN_MAP_MUX_GROUP(dev, state, "pinctrl-db8500", group, func) -#define DB8500_PIN_STATE(pin, conf, dev, state) \ - PIN_MAP_CONFIGS_PIN(dev, state, "pinctrl-db8500", pin, conf) - #define AB8500_MUX_HOG(group, func) \ PIN_MAP_MUX_GROUP_HOG_DEFAULT("pinctrl-ab8500.0", group, func) #define AB8500_PIN_HOG(pin, conf) \ @@ -344,725 +268,8 @@ static struct pinctrl_map __initdata ab8505_pinmap[] = { AB8505_PIN_HOG("GPIO53_D15", in_pd), }; -/* Pin control settings */ -static struct pinctrl_map __initdata mop500_family_pinmap[] = { - /* - * uMSP0, mux in 4 pins, regular placement of RX/TX - * explicitly set the pins to no pull - */ - DB8500_MUX_HOG("msp0txrx_a_1", "msp0"), - DB8500_MUX_HOG("msp0tfstck_a_1", "msp0"), - DB8500_PIN_HOG("GPIO12_AC4", in_nopull), /* TXD */ - DB8500_PIN_HOG("GPIO15_AC3", in_nopull), /* RXD */ - DB8500_PIN_HOG("GPIO13_AF3", in_nopull), /* TFS */ - DB8500_PIN_HOG("GPIO14_AE3", in_nopull), /* TCK */ - /* MSP2 for HDMI, pull down TXD, TCK, TFS */ - DB8500_MUX_HOG("msp2_a_1", "msp2"), - DB8500_PIN_HOG("GPIO193_AH27", in_pd), /* TXD */ - DB8500_PIN_HOG("GPIO194_AF27", in_pd), /* TCK */ - DB8500_PIN_HOG("GPIO195_AG28", in_pd), /* TFS */ - DB8500_PIN_HOG("GPIO196_AG26", out_lo), /* RXD */ - /* - * LCD, set TE0 (using LCD VSI0) and D14 (touch screen interrupt) to - * pull-up - * TODO: is this really correct? Snowball doesn't have a LCD. - */ - DB8500_MUX_HOG("lcdvsi0_a_1", "lcd"), - DB8500_PIN_HOG("GPIO68_E1", in_pu), - DB8500_PIN_HOG("GPIO84_C2", gpio_in_pu), - /* - * STMPE1601/tc35893 keypad IRQ GPIO 218 - * TODO: set for snowball and HREF really?? - */ - DB8500_PIN_HOG("GPIO218_AH11", gpio_in_pu), - /* - * UART0, we do not mux in u0 here. - * uart-0 pins gpio configuration should be kept intact to prevent - * a glitch in tx line when the tty dev is opened. Later these pins - * are configured by uart driver - */ - DB8500_PIN_HOG("GPIO0_AJ5", in_pu), /* CTS */ - DB8500_PIN_HOG("GPIO1_AJ3", out_hi), /* RTS */ - DB8500_PIN_HOG("GPIO2_AH4", in_pu), /* RXD */ - DB8500_PIN_HOG("GPIO3_AH3", out_hi), /* TXD */ - /* - * Mux in UART2 on altfunction C and set pull-ups. - * TODO: is this used on U8500 variants and Snowball really? - * The setting on GPIO31 conflicts with magnetometer use on hrefv60 - */ - /* default state for UART2 */ - DB8500_MUX("u2rxtx_c_1", "u2", "uart2"), - DB8500_PIN("GPIO29_W2", in_pu, "uart2"), /* RXD */ - DB8500_PIN("GPIO30_W3", out_hi, "uart2"), /* TXD */ - /* Sleep state for UART2 */ - DB8500_PIN_SLEEP("GPIO29_W2", in_wkup_pdis, "uart2"), - DB8500_PIN_SLEEP("GPIO30_W3", out_wkup_pdis, "uart2"), - /* - * The following pin sets were known as "runtime pins" before being - * converted to the pinctrl model. Here we model them as "default" - * states. - */ - /* Mux in UART0 after initialization */ - DB8500_MUX("u0_a_1", "u0", "uart0"), - DB8500_PIN("GPIO0_AJ5", in_pu, "uart0"), /* CTS */ - DB8500_PIN("GPIO1_AJ3", out_hi, "uart0"), /* RTS */ - DB8500_PIN("GPIO2_AH4", in_pu, "uart0"), /* RXD */ - DB8500_PIN("GPIO3_AH3", out_hi, "uart0"), /* TXD */ - /* Sleep state for UART0 */ - DB8500_PIN_SLEEP("GPIO0_AJ5", slpm_in_wkup_pdis, "uart0"), - DB8500_PIN_SLEEP("GPIO1_AJ3", slpm_out_hi_wkup_pdis, "uart0"), - DB8500_PIN_SLEEP("GPIO2_AH4", slpm_in_wkup_pdis, "uart0"), - DB8500_PIN_SLEEP("GPIO3_AH3", slpm_out_wkup_pdis, "uart0"), - /* Mux in UART1 after initialization */ - DB8500_MUX("u1rxtx_a_1", "u1", "uart1"), - DB8500_PIN("GPIO4_AH6", in_pu, "uart1"), /* RXD */ - DB8500_PIN("GPIO5_AG6", out_hi, "uart1"), /* TXD */ - /* Sleep state for UART1 */ - DB8500_PIN_SLEEP("GPIO4_AH6", slpm_in_wkup_pdis, "uart1"), - DB8500_PIN_SLEEP("GPIO5_AG6", slpm_out_wkup_pdis, "uart1"), - /* MSP1 for ALSA codec */ - DB8500_MUX_HOG("msp1txrx_a_1", "msp1"), - DB8500_MUX_HOG("msp1_a_1", "msp1"), - DB8500_PIN_HOG("GPIO33_AF2", out_lo_slpm_nowkup), - DB8500_PIN_HOG("GPIO34_AE1", in_nopull_slpm_nowkup), - DB8500_PIN_HOG("GPIO35_AE2", in_nopull_slpm_nowkup), - DB8500_PIN_HOG("GPIO36_AG2", in_nopull_slpm_nowkup), - /* Mux in LCD data lines 8 thru 11 and LCDA CLK for MCDE TVOUT */ - DB8500_MUX("lcd_d8_d11_a_1", "lcd", "mcde-tvout"), - DB8500_MUX("lcdaclk_b_1", "lcda", "mcde-tvout"), - /* Mux in LCD VSI1 and pull it up for MCDE HDMI output */ - DB8500_MUX("lcdvsi1_a_1", "lcd", "0-0070"), - DB8500_PIN("GPIO69_E2", in_pu, "0-0070"), - /* LCD VSI1 sleep state */ - DB8500_PIN_SLEEP("GPIO69_E2", slpm_in_wkup_pdis, "0-0070"), - /* Mux in i2c0 block, default state */ - DB8500_MUX("i2c0_a_1", "i2c0", "nmk-i2c.0"), - /* i2c0 sleep state */ - DB8500_PIN_SLEEP("GPIO147_C15", slpm_in_nopull_wkup_pdis, "nmk-i2c.0"), /* SDA */ - DB8500_PIN_SLEEP("GPIO148_B16", slpm_in_nopull_wkup_pdis, "nmk-i2c.0"), /* SCL */ - /* Mux in i2c1 block, default state */ - DB8500_MUX("i2c1_b_2", "i2c1", "nmk-i2c.1"), - /* i2c1 sleep state */ - DB8500_PIN_SLEEP("GPIO16_AD3", slpm_in_nopull_wkup_pdis, "nmk-i2c.1"), /* SDA */ - DB8500_PIN_SLEEP("GPIO17_AD4", slpm_in_nopull_wkup_pdis, "nmk-i2c.1"), /* SCL */ - /* Mux in i2c2 block, default state */ - DB8500_MUX("i2c2_b_2", "i2c2", "nmk-i2c.2"), - /* i2c2 sleep state */ - DB8500_PIN_SLEEP("GPIO10_AF5", slpm_in_nopull_wkup_pdis, "nmk-i2c.2"), /* SDA */ - DB8500_PIN_SLEEP("GPIO11_AG4", slpm_in_nopull_wkup_pdis, "nmk-i2c.2"), /* SCL */ - /* Mux in i2c3 block, default state */ - DB8500_MUX("i2c3_c_2", "i2c3", "nmk-i2c.3"), - /* i2c3 sleep state */ - DB8500_PIN_SLEEP("GPIO229_AG7", slpm_in_nopull_wkup_pdis, "nmk-i2c.3"), /* SDA */ - DB8500_PIN_SLEEP("GPIO230_AF7", slpm_in_nopull_wkup_pdis, "nmk-i2c.3"), /* SCL */ - /* Mux in SDI0 (here called MC0) used for removable MMC/SD/SDIO cards */ - DB8500_MUX("mc0_a_1", "mc0", "sdi0"), - DB8500_PIN("GPIO18_AC2", out_hi, "sdi0"), /* CMDDIR */ - DB8500_PIN("GPIO19_AC1", out_hi, "sdi0"), /* DAT0DIR */ - DB8500_PIN("GPIO20_AB4", out_hi, "sdi0"), /* DAT2DIR */ - DB8500_PIN("GPIO22_AA3", in_nopull, "sdi0"), /* FBCLK */ - DB8500_PIN("GPIO23_AA4", out_lo, "sdi0"), /* CLK */ - DB8500_PIN("GPIO24_AB2", in_pu, "sdi0"), /* CMD */ - DB8500_PIN("GPIO25_Y4", in_pu, "sdi0"), /* DAT0 */ - DB8500_PIN("GPIO26_Y2", in_pu, "sdi0"), /* DAT1 */ - DB8500_PIN("GPIO27_AA2", in_pu, "sdi0"), /* DAT2 */ - DB8500_PIN("GPIO28_AA1", in_pu, "sdi0"), /* DAT3 */ - /* SDI0 sleep state */ - DB8500_PIN_SLEEP("GPIO18_AC2", slpm_out_hi_wkup_pdis, "sdi0"), - DB8500_PIN_SLEEP("GPIO19_AC1", slpm_out_hi_wkup_pdis, "sdi0"), - DB8500_PIN_SLEEP("GPIO20_AB4", slpm_out_hi_wkup_pdis, "sdi0"), - DB8500_PIN_SLEEP("GPIO22_AA3", slpm_in_wkup_pdis, "sdi0"), - DB8500_PIN_SLEEP("GPIO23_AA4", slpm_out_lo_wkup_pdis, "sdi0"), - DB8500_PIN_SLEEP("GPIO24_AB2", slpm_in_wkup_pdis, "sdi0"), - DB8500_PIN_SLEEP("GPIO25_Y4", slpm_in_wkup_pdis, "sdi0"), - DB8500_PIN_SLEEP("GPIO26_Y2", slpm_in_wkup_pdis, "sdi0"), - DB8500_PIN_SLEEP("GPIO27_AA2", slpm_in_wkup_pdis, "sdi0"), - DB8500_PIN_SLEEP("GPIO28_AA1", slpm_in_wkup_pdis, "sdi0"), - - /* Mux in SDI1 (here called MC1) used for SDIO for CW1200 WLAN */ - DB8500_MUX("mc1_a_1", "mc1", "sdi1"), - DB8500_PIN("GPIO208_AH16", out_lo, "sdi1"), /* CLK */ - DB8500_PIN("GPIO209_AG15", in_nopull, "sdi1"), /* FBCLK */ - DB8500_PIN("GPIO210_AJ15", in_pu, "sdi1"), /* CMD */ - DB8500_PIN("GPIO211_AG14", in_pu, "sdi1"), /* DAT0 */ - DB8500_PIN("GPIO212_AF13", in_pu, "sdi1"), /* DAT1 */ - DB8500_PIN("GPIO213_AG13", in_pu, "sdi1"), /* DAT2 */ - DB8500_PIN("GPIO214_AH15", in_pu, "sdi1"), /* DAT3 */ - /* SDI1 sleep state */ - DB8500_PIN_SLEEP("GPIO208_AH16", slpm_out_lo_wkup_pdis, "sdi1"), /* CLK */ - DB8500_PIN_SLEEP("GPIO209_AG15", slpm_in_wkup_pdis, "sdi1"), /* FBCLK */ - DB8500_PIN_SLEEP("GPIO210_AJ15", slpm_in_wkup_pdis, "sdi1"), /* CMD */ - DB8500_PIN_SLEEP("GPIO211_AG14", slpm_in_wkup_pdis, "sdi1"), /* DAT0 */ - DB8500_PIN_SLEEP("GPIO212_AF13", slpm_in_wkup_pdis, "sdi1"), /* DAT1 */ - DB8500_PIN_SLEEP("GPIO213_AG13", slpm_in_wkup_pdis, "sdi1"), /* DAT2 */ - DB8500_PIN_SLEEP("GPIO214_AH15", slpm_in_wkup_pdis, "sdi1"), /* DAT3 */ - - /* Mux in SDI2 (here called MC2) used for for PoP eMMC */ - DB8500_MUX("mc2_a_1", "mc2", "sdi2"), - DB8500_PIN("GPIO128_A5", out_lo, "sdi2"), /* CLK */ - DB8500_PIN("GPIO129_B4", in_pu, "sdi2"), /* CMD */ - DB8500_PIN("GPIO130_C8", in_nopull, "sdi2"), /* FBCLK */ - DB8500_PIN("GPIO131_A12", in_pu, "sdi2"), /* DAT0 */ - DB8500_PIN("GPIO132_C10", in_pu, "sdi2"), /* DAT1 */ - DB8500_PIN("GPIO133_B10", in_pu, "sdi2"), /* DAT2 */ - DB8500_PIN("GPIO134_B9", in_pu, "sdi2"), /* DAT3 */ - DB8500_PIN("GPIO135_A9", in_pu, "sdi2"), /* DAT4 */ - DB8500_PIN("GPIO136_C7", in_pu, "sdi2"), /* DAT5 */ - DB8500_PIN("GPIO137_A7", in_pu, "sdi2"), /* DAT6 */ - DB8500_PIN("GPIO138_C5", in_pu, "sdi2"), /* DAT7 */ - /* SDI2 sleep state */ - DB8500_PIN_SLEEP("GPIO128_A5", out_lo_wkup_pdis, "sdi2"), /* CLK */ - DB8500_PIN_SLEEP("GPIO129_B4", in_wkup_pdis_en, "sdi2"), /* CMD */ - DB8500_PIN_SLEEP("GPIO130_C8", in_wkup_pdis_en, "sdi2"), /* FBCLK */ - DB8500_PIN_SLEEP("GPIO131_A12", in_wkup_pdis, "sdi2"), /* DAT0 */ - DB8500_PIN_SLEEP("GPIO132_C10", in_wkup_pdis, "sdi2"), /* DAT1 */ - DB8500_PIN_SLEEP("GPIO133_B10", in_wkup_pdis, "sdi2"), /* DAT2 */ - DB8500_PIN_SLEEP("GPIO134_B9", in_wkup_pdis, "sdi2"), /* DAT3 */ - DB8500_PIN_SLEEP("GPIO135_A9", in_wkup_pdis, "sdi2"), /* DAT4 */ - DB8500_PIN_SLEEP("GPIO136_C7", in_wkup_pdis, "sdi2"), /* DAT5 */ - DB8500_PIN_SLEEP("GPIO137_A7", in_wkup_pdis, "sdi2"), /* DAT6 */ - DB8500_PIN_SLEEP("GPIO138_C5", in_wkup_pdis, "sdi2"), /* DAT7 */ - - /* Mux in SDI4 (here called MC4) used for for PCB-mounted eMMC */ - DB8500_MUX("mc4_a_1", "mc4", "sdi4"), - DB8500_PIN("GPIO197_AH24", in_pu, "sdi4"), /* DAT3 */ - DB8500_PIN("GPIO198_AG25", in_pu, "sdi4"), /* DAT2 */ - DB8500_PIN("GPIO199_AH23", in_pu, "sdi4"), /* DAT1 */ - DB8500_PIN("GPIO200_AH26", in_pu, "sdi4"), /* DAT0 */ - DB8500_PIN("GPIO201_AF24", in_pu, "sdi4"), /* CMD */ - DB8500_PIN("GPIO202_AF25", in_nopull, "sdi4"), /* FBCLK */ - DB8500_PIN("GPIO203_AE23", out_lo, "sdi4"), /* CLK */ - DB8500_PIN("GPIO204_AF23", in_pu, "sdi4"), /* DAT7 */ - DB8500_PIN("GPIO205_AG23", in_pu, "sdi4"), /* DAT6 */ - DB8500_PIN("GPIO206_AG24", in_pu, "sdi4"), /* DAT5 */ - DB8500_PIN("GPIO207_AJ23", in_pu, "sdi4"), /* DAT4 */ - /*SDI4 sleep state */ - DB8500_PIN_SLEEP("GPIO197_AH24", slpm_in_wkup_pdis, "sdi4"), /* DAT3 */ - DB8500_PIN_SLEEP("GPIO198_AG25", slpm_in_wkup_pdis, "sdi4"), /* DAT2 */ - DB8500_PIN_SLEEP("GPIO199_AH23", slpm_in_wkup_pdis, "sdi4"), /* DAT1 */ - DB8500_PIN_SLEEP("GPIO200_AH26", slpm_in_wkup_pdis, "sdi4"), /* DAT0 */ - DB8500_PIN_SLEEP("GPIO201_AF24", slpm_in_wkup_pdis, "sdi4"), /* CMD */ - DB8500_PIN_SLEEP("GPIO202_AF25", slpm_in_wkup_pdis, "sdi4"), /* FBCLK */ - DB8500_PIN_SLEEP("GPIO203_AE23", slpm_out_lo_wkup_pdis, "sdi4"), /* CLK */ - DB8500_PIN_SLEEP("GPIO204_AF23", slpm_in_wkup_pdis, "sdi4"), /* DAT7 */ - DB8500_PIN_SLEEP("GPIO205_AG23", slpm_in_wkup_pdis, "sdi4"), /* DAT6 */ - DB8500_PIN_SLEEP("GPIO206_AG24", slpm_in_wkup_pdis, "sdi4"), /* DAT5 */ - DB8500_PIN_SLEEP("GPIO207_AJ23", slpm_in_wkup_pdis, "sdi4"), /* DAT4 */ - - /* Mux in USB pins, drive STP high */ - /* USB default state */ - DB8500_MUX("usb_a_1", "usb", "ab8500-usb.0"), - DB8500_PIN("GPIO257_AE29", out_hi, "ab8500-usb.0"), /* STP */ - /* USB sleep state */ - DB8500_PIN_SLEEP("GPIO256_AF28", slpm_wkup_pdis_en, "ab8500-usb.0"), /* NXT */ - DB8500_PIN_SLEEP("GPIO257_AE29", slpm_out_hi_wkup_pdis, "ab8500-usb.0"), /* STP */ - DB8500_PIN_SLEEP("GPIO258_AD29", slpm_wkup_pdis_en, "ab8500-usb.0"), /* XCLK */ - DB8500_PIN_SLEEP("GPIO259_AC29", slpm_wkup_pdis_en, "ab8500-usb.0"), /* DIR */ - DB8500_PIN_SLEEP("GPIO260_AD28", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT7 */ - DB8500_PIN_SLEEP("GPIO261_AD26", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT6 */ - DB8500_PIN_SLEEP("GPIO262_AE26", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT5 */ - DB8500_PIN_SLEEP("GPIO263_AG29", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT4 */ - DB8500_PIN_SLEEP("GPIO264_AE27", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT3 */ - DB8500_PIN_SLEEP("GPIO265_AD27", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT2 */ - DB8500_PIN_SLEEP("GPIO266_AC28", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT1 */ - DB8500_PIN_SLEEP("GPIO267_AC27", slpm_in_wkup_pdis_en, "ab8500-usb.0"), /* DAT0 */ - - /* Mux in SPI2 pins on the "other C1" altfunction */ - DB8500_MUX("spi2_oc1_2", "spi2", "spi2"), - DB8500_PIN("GPIO216_AG12", gpio_out_hi, "spi2"), /* FRM */ - DB8500_PIN("GPIO218_AH11", in_pd, "spi2"), /* RXD */ - DB8500_PIN("GPIO215_AH13", out_lo, "spi2"), /* TXD */ - DB8500_PIN("GPIO217_AH12", out_lo, "spi2"), /* CLK */ - /* SPI2 idle state */ - DB8500_PIN_IDLE("GPIO218_AH11", slpm_in_wkup_pdis, "spi2"), /* RXD */ - DB8500_PIN_IDLE("GPIO215_AH13", slpm_out_lo_wkup_pdis, "spi2"), /* TXD */ - DB8500_PIN_IDLE("GPIO217_AH12", slpm_wkup_pdis, "spi2"), /* CLK */ - /* SPI2 sleep state */ - DB8500_PIN_SLEEP("GPIO216_AG12", slpm_in_wkup_pdis, "spi2"), /* FRM */ - DB8500_PIN_SLEEP("GPIO218_AH11", slpm_in_wkup_pdis, "spi2"), /* RXD */ - DB8500_PIN_SLEEP("GPIO215_AH13", slpm_out_lo_wkup_pdis, "spi2"), /* TXD */ - DB8500_PIN_SLEEP("GPIO217_AH12", slpm_wkup_pdis, "spi2"), /* CLK */ - - /* ske default state */ - DB8500_MUX("kp_a_2", "kp", "nmk-ske-keypad"), - DB8500_PIN("GPIO153_B17", in_pd, "nmk-ske-keypad"), /* I7 */ - DB8500_PIN("GPIO154_C16", in_pd, "nmk-ske-keypad"), /* I6 */ - DB8500_PIN("GPIO155_C19", in_pd, "nmk-ske-keypad"), /* I5 */ - DB8500_PIN("GPIO156_C17", in_pd, "nmk-ske-keypad"), /* I4 */ - DB8500_PIN("GPIO161_D21", in_pd, "nmk-ske-keypad"), /* I3 */ - DB8500_PIN("GPIO162_D20", in_pd, "nmk-ske-keypad"), /* I2 */ - DB8500_PIN("GPIO163_C20", in_pd, "nmk-ske-keypad"), /* I1 */ - DB8500_PIN("GPIO164_B21", in_pd, "nmk-ske-keypad"), /* I0 */ - DB8500_PIN("GPIO157_A18", out_lo, "nmk-ske-keypad"), /* O7 */ - DB8500_PIN("GPIO158_C18", out_lo, "nmk-ske-keypad"), /* O6 */ - DB8500_PIN("GPIO159_B19", out_lo, "nmk-ske-keypad"), /* O5 */ - DB8500_PIN("GPIO160_B20", out_lo, "nmk-ske-keypad"), /* O4 */ - DB8500_PIN("GPIO165_C21", out_lo, "nmk-ske-keypad"), /* O3 */ - DB8500_PIN("GPIO166_A22", out_lo, "nmk-ske-keypad"), /* O2 */ - DB8500_PIN("GPIO167_B24", out_lo, "nmk-ske-keypad"), /* O1 */ - DB8500_PIN("GPIO168_C22", out_lo, "nmk-ske-keypad"), /* O0 */ - /* ske sleep state */ - DB8500_PIN_SLEEP("GPIO153_B17", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I7 */ - DB8500_PIN_SLEEP("GPIO154_C16", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I6 */ - DB8500_PIN_SLEEP("GPIO155_C19", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I5 */ - DB8500_PIN_SLEEP("GPIO156_C17", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I4 */ - DB8500_PIN_SLEEP("GPIO161_D21", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I3 */ - DB8500_PIN_SLEEP("GPIO162_D20", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I2 */ - DB8500_PIN_SLEEP("GPIO163_C20", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I1 */ - DB8500_PIN_SLEEP("GPIO164_B21", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I0 */ - DB8500_PIN_SLEEP("GPIO157_A18", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O7 */ - DB8500_PIN_SLEEP("GPIO158_C18", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O6 */ - DB8500_PIN_SLEEP("GPIO159_B19", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O5 */ - DB8500_PIN_SLEEP("GPIO160_B20", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O4 */ - DB8500_PIN_SLEEP("GPIO165_C21", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O3 */ - DB8500_PIN_SLEEP("GPIO166_A22", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O2 */ - DB8500_PIN_SLEEP("GPIO167_B24", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O1 */ - DB8500_PIN_SLEEP("GPIO168_C22", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O0 */ - - /* STM APE pins states */ - DB8500_MUX_STATE("stmape_c_1", "stmape", - "stm", "ape_mipi34"), - DB8500_PIN_STATE("GPIO70_G5", in_nopull, - "stm", "ape_mipi34"), /* clk */ - DB8500_PIN_STATE("GPIO71_G4", in_nopull, - "stm", "ape_mipi34"), /* dat3 */ - DB8500_PIN_STATE("GPIO72_H4", in_nopull, - "stm", "ape_mipi34"), /* dat2 */ - DB8500_PIN_STATE("GPIO73_H3", in_nopull, - "stm", "ape_mipi34"), /* dat1 */ - DB8500_PIN_STATE("GPIO74_J3", in_nopull, - "stm", "ape_mipi34"), /* dat0 */ - - DB8500_PIN_STATE("GPIO70_G5", slpm_out_lo_pdis, - "stm", "ape_mipi34_sleep"), /* clk */ - DB8500_PIN_STATE("GPIO71_G4", slpm_out_lo_pdis, - "stm", "ape_mipi34_sleep"), /* dat3 */ - DB8500_PIN_STATE("GPIO72_H4", slpm_out_lo_pdis, - "stm", "ape_mipi34_sleep"), /* dat2 */ - DB8500_PIN_STATE("GPIO73_H3", slpm_out_lo_pdis, - "stm", "ape_mipi34_sleep"), /* dat1 */ - DB8500_PIN_STATE("GPIO74_J3", slpm_out_lo_pdis, - "stm", "ape_mipi34_sleep"), /* dat0 */ - - DB8500_MUX_STATE("stmape_oc1_1", "stmape", - "stm", "ape_microsd"), - DB8500_PIN_STATE("GPIO23_AA4", in_nopull, - "stm", "ape_microsd"), /* clk */ - DB8500_PIN_STATE("GPIO25_Y4", in_nopull, - "stm", "ape_microsd"), /* dat0 */ - DB8500_PIN_STATE("GPIO26_Y2", in_nopull, - "stm", "ape_microsd"), /* dat1 */ - DB8500_PIN_STATE("GPIO27_AA2", in_nopull, - "stm", "ape_microsd"), /* dat2 */ - DB8500_PIN_STATE("GPIO28_AA1", in_nopull, - "stm", "ape_microsd"), /* dat3 */ - - DB8500_PIN_STATE("GPIO23_AA4", slpm_out_lo_wkup_pdis, - "stm", "ape_microsd_sleep"), /* clk */ - DB8500_PIN_STATE("GPIO25_Y4", slpm_in_wkup_pdis, - "stm", "ape_microsd_sleep"), /* dat0 */ - DB8500_PIN_STATE("GPIO26_Y2", slpm_in_wkup_pdis, - "stm", "ape_microsd_sleep"), /* dat1 */ - DB8500_PIN_STATE("GPIO27_AA2", slpm_in_wkup_pdis, - "stm", "ape_microsd_sleep"), /* dat2 */ - DB8500_PIN_STATE("GPIO28_AA1", slpm_in_wkup_pdis, - "stm", "ape_microsd_sleep"), /* dat3 */ - - /* STM Modem pins states */ - DB8500_MUX_STATE("stmmod_oc3_2", "stmmod", - "stm", "mod_mipi34"), - DB8500_MUX_STATE("uartmodrx_oc3_1", "uartmod", - "stm", "mod_mipi34"), - DB8500_MUX_STATE("uartmodtx_oc3_1", "uartmod", - "stm", "mod_mipi34"), - DB8500_PIN_STATE("GPIO70_G5", in_nopull, - "stm", "mod_mipi34"), /* clk */ - DB8500_PIN_STATE("GPIO71_G4", in_nopull, - "stm", "mod_mipi34"), /* dat3 */ - DB8500_PIN_STATE("GPIO72_H4", in_nopull, - "stm", "mod_mipi34"), /* dat2 */ - DB8500_PIN_STATE("GPIO73_H3", in_nopull, - "stm", "mod_mipi34"), /* dat1 */ - DB8500_PIN_STATE("GPIO74_J3", in_nopull, - "stm", "mod_mipi34"), /* dat0 */ - DB8500_PIN_STATE("GPIO75_H2", in_pu, - "stm", "mod_mipi34"), /* uartmod rx */ - DB8500_PIN_STATE("GPIO76_J2", out_lo, - "stm", "mod_mipi34"), /* uartmod tx */ - - DB8500_PIN_STATE("GPIO70_G5", slpm_out_lo_pdis, - "stm", "mod_mipi34_sleep"), /* clk */ - DB8500_PIN_STATE("GPIO71_G4", slpm_out_lo_pdis, - "stm", "mod_mipi34_sleep"), /* dat3 */ - DB8500_PIN_STATE("GPIO72_H4", slpm_out_lo_pdis, - "stm", "mod_mipi34_sleep"), /* dat2 */ - DB8500_PIN_STATE("GPIO73_H3", slpm_out_lo_pdis, - "stm", "mod_mipi34_sleep"), /* dat1 */ - DB8500_PIN_STATE("GPIO74_J3", slpm_out_lo_pdis, - "stm", "mod_mipi34_sleep"), /* dat0 */ - DB8500_PIN_STATE("GPIO75_H2", slpm_in_wkup_pdis, - "stm", "mod_mipi34_sleep"), /* uartmod rx */ - DB8500_PIN_STATE("GPIO76_J2", slpm_out_lo_wkup_pdis, - "stm", "mod_mipi34_sleep"), /* uartmod tx */ - - DB8500_MUX_STATE("stmmod_b_1", "stmmod", - "stm", "mod_microsd"), - DB8500_MUX_STATE("uartmodrx_oc3_1", "uartmod", - "stm", "mod_microsd"), - DB8500_MUX_STATE("uartmodtx_oc3_1", "uartmod", - "stm", "mod_microsd"), - DB8500_PIN_STATE("GPIO23_AA4", in_nopull, - "stm", "mod_microsd"), /* clk */ - DB8500_PIN_STATE("GPIO25_Y4", in_nopull, - "stm", "mod_microsd"), /* dat0 */ - DB8500_PIN_STATE("GPIO26_Y2", in_nopull, - "stm", "mod_microsd"), /* dat1 */ - DB8500_PIN_STATE("GPIO27_AA2", in_nopull, - "stm", "mod_microsd"), /* dat2 */ - DB8500_PIN_STATE("GPIO28_AA1", in_nopull, - "stm", "mod_microsd"), /* dat3 */ - DB8500_PIN_STATE("GPIO75_H2", in_pu, - "stm", "mod_microsd"), /* uartmod rx */ - DB8500_PIN_STATE("GPIO76_J2", out_lo, - "stm", "mod_microsd"), /* uartmod tx */ - - DB8500_PIN_STATE("GPIO23_AA4", slpm_out_lo_wkup_pdis, - "stm", "mod_microsd_sleep"), /* clk */ - DB8500_PIN_STATE("GPIO25_Y4", slpm_in_wkup_pdis, - "stm", "mod_microsd_sleep"), /* dat0 */ - DB8500_PIN_STATE("GPIO26_Y2", slpm_in_wkup_pdis, - "stm", "mod_microsd_sleep"), /* dat1 */ - DB8500_PIN_STATE("GPIO27_AA2", slpm_in_wkup_pdis, - "stm", "mod_microsd_sleep"), /* dat2 */ - DB8500_PIN_STATE("GPIO28_AA1", slpm_in_wkup_pdis, - "stm", "mod_microsd_sleep"), /* dat3 */ - DB8500_PIN_STATE("GPIO75_H2", slpm_in_wkup_pdis, - "stm", "mod_microsd_sleep"), /* uartmod rx */ - DB8500_PIN_STATE("GPIO76_J2", slpm_out_lo_wkup_pdis, - "stm", "mod_microsd_sleep"), /* uartmod tx */ - - /* STM dual Modem/APE pins state */ - DB8500_MUX_STATE("stmmod_oc3_2", "stmmod", - "stm", "mod_mipi34_ape_mipi60"), - DB8500_MUX_STATE("stmape_c_2", "stmape", - "stm", "mod_mipi34_ape_mipi60"), - DB8500_MUX_STATE("uartmodrx_oc3_1", "uartmod", - "stm", "mod_mipi34_ape_mipi60"), - DB8500_MUX_STATE("uartmodtx_oc3_1", "uartmod", - "stm", "mod_mipi34_ape_mipi60"), - DB8500_PIN_STATE("GPIO70_G5", in_nopull, - "stm", "mod_mipi34_ape_mipi60"), /* clk */ - DB8500_PIN_STATE("GPIO71_G4", in_nopull, - "stm", "mod_mipi34_ape_mipi60"), /* dat3 */ - DB8500_PIN_STATE("GPIO72_H4", in_nopull, - "stm", "mod_mipi34_ape_mipi60"), /* dat2 */ - DB8500_PIN_STATE("GPIO73_H3", in_nopull, - "stm", "mod_mipi34_ape_mipi60"), /* dat1 */ - DB8500_PIN_STATE("GPIO74_J3", in_nopull, - "stm", "mod_mipi34_ape_mipi60"), /* dat0 */ - DB8500_PIN_STATE("GPIO75_H2", in_pu, - "stm", "mod_mipi34_ape_mipi60"), /* uartmod rx */ - DB8500_PIN_STATE("GPIO76_J2", out_lo, - "stm", "mod_mipi34_ape_mipi60"), /* uartmod tx */ - DB8500_PIN_STATE("GPIO155_C19", in_nopull, - "stm", "mod_mipi34_ape_mipi60"), /* clk */ - DB8500_PIN_STATE("GPIO156_C17", in_nopull, - "stm", "mod_mipi34_ape_mipi60"), /* dat3 */ - DB8500_PIN_STATE("GPIO157_A18", in_nopull, - "stm", "mod_mipi34_ape_mipi60"), /* dat2 */ - DB8500_PIN_STATE("GPIO158_C18", in_nopull, - "stm", "mod_mipi34_ape_mipi60"), /* dat1 */ - DB8500_PIN_STATE("GPIO159_B19", in_nopull, - "stm", "mod_mipi34_ape_mipi60"), /* dat0 */ - - DB8500_PIN_STATE("GPIO70_G5", slpm_out_lo_pdis, - "stm", "mod_mipi34_ape_mipi60_sleep"), /* clk */ - DB8500_PIN_STATE("GPIO71_G4", slpm_out_lo_pdis, - "stm", "mod_mipi34_ape_mipi60_sleep"), /* dat3 */ - DB8500_PIN_STATE("GPIO72_H4", slpm_out_lo_pdis, - "stm", "mod_mipi34_ape_mipi60_sleep"), /* dat2 */ - DB8500_PIN_STATE("GPIO73_H3", slpm_out_lo_pdis, - "stm", "mod_mipi34_ape_mipi60_sleep"), /* dat1 */ - DB8500_PIN_STATE("GPIO74_J3", slpm_out_lo_pdis, - "stm", "mod_mipi34_ape_mipi60_sleep"), /* dat0 */ - DB8500_PIN_STATE("GPIO75_H2", slpm_in_wkup_pdis, - "stm", "mod_mipi34_ape_mipi60_sleep"), /* uartmod rx */ - DB8500_PIN_STATE("GPIO76_J2", slpm_out_lo_wkup_pdis, - "stm", "mod_mipi34_ape_mipi60_sleep"), /* uartmod tx */ - DB8500_PIN_STATE("GPIO155_C19", slpm_in_wkup_pdis, - "stm", "mod_mipi34_ape_mipi60_sleep"), /* clk */ - DB8500_PIN_STATE("GPIO156_C17", slpm_in_wkup_pdis, - "stm", "mod_mipi34_ape_mipi60_sleep"), /* dat3 */ - DB8500_PIN_STATE("GPIO157_A18", slpm_in_wkup_pdis, - "stm", "mod_mipi34_ape_mipi60_sleep"), /* dat2 */ - DB8500_PIN_STATE("GPIO158_C18", slpm_in_wkup_pdis, - "stm", "mod_mipi34_ape_mipi60_sleep"), /* dat1 */ - DB8500_PIN_STATE("GPIO159_B19", slpm_in_wkup_pdis, - "stm", "mod_mipi34_ape_mipi60_sleep"), /* dat0 */ -}; - -/* - * These are specifically for the MOP500 and HREFP (pre-v60) version of the - * board, which utilized a TC35892 GPIO expander instead of using a lot of - * on-chip pins as the HREFv60 and later does. - */ -static struct pinctrl_map __initdata mop500_pinmap[] = { - /* Mux in SSP0, pull down RXD pin */ - DB8500_MUX_HOG("ssp0_a_1", "ssp0"), - DB8500_PIN_HOG("GPIO145_C13", pd), - /* - * XENON Flashgun on image processor GPIO (controlled from image - * processor firmware), mux in these image processor GPIO lines 0 - * (XENON_FLASH_ID) and 1 (XENON_READY) on altfunction C and pull up - * the pins. - */ - DB8500_MUX_HOG("ipgpio0_c_1", "ipgpio"), - DB8500_MUX_HOG("ipgpio1_c_1", "ipgpio"), - DB8500_PIN_HOG("GPIO6_AF6", in_pu), - DB8500_PIN_HOG("GPIO7_AG5", in_pu), - /* TC35892 IRQ, pull up the line, let the driver mux in the pin */ - DB8500_PIN_HOG("GPIO217_AH12", gpio_in_pu), - /* Mux in UART1 and set the pull-ups */ - DB8500_MUX_HOG("u1rxtx_a_1", "u1"), - DB8500_PIN_HOG("GPIO4_AH6", in_pu), /* RXD */ - DB8500_PIN_HOG("GPIO5_AG6", out_hi), /* TXD */ - /* - * Runtime stuff: make it possible to mux in the SKE keypad - * and bias the pins - */ - /* ske default state */ - DB8500_MUX("kp_a_2", "kp", "nmk-ske-keypad"), - DB8500_PIN("GPIO153_B17", in_pu, "nmk-ske-keypad"), /* I7 */ - DB8500_PIN("GPIO154_C16", in_pu, "nmk-ske-keypad"), /* I6 */ - DB8500_PIN("GPIO155_C19", in_pu, "nmk-ske-keypad"), /* I5 */ - DB8500_PIN("GPIO156_C17", in_pu, "nmk-ske-keypad"), /* I4 */ - DB8500_PIN("GPIO161_D21", in_pu, "nmk-ske-keypad"), /* I3 */ - DB8500_PIN("GPIO162_D20", in_pu, "nmk-ske-keypad"), /* I2 */ - DB8500_PIN("GPIO163_C20", in_pu, "nmk-ske-keypad"), /* I1 */ - DB8500_PIN("GPIO164_B21", in_pu, "nmk-ske-keypad"), /* I0 */ - DB8500_PIN("GPIO157_A18", out_lo, "nmk-ske-keypad"), /* O7 */ - DB8500_PIN("GPIO158_C18", out_lo, "nmk-ske-keypad"), /* O6 */ - DB8500_PIN("GPIO159_B19", out_lo, "nmk-ske-keypad"), /* O5 */ - DB8500_PIN("GPIO160_B20", out_lo, "nmk-ske-keypad"), /* O4 */ - DB8500_PIN("GPIO165_C21", out_lo, "nmk-ske-keypad"), /* O3 */ - DB8500_PIN("GPIO166_A22", out_lo, "nmk-ske-keypad"), /* O2 */ - DB8500_PIN("GPIO167_B24", out_lo, "nmk-ske-keypad"), /* O1 */ - DB8500_PIN("GPIO168_C22", out_lo, "nmk-ske-keypad"), /* O0 */ - /* ske sleep state */ - DB8500_PIN_SLEEP("GPIO153_B17", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I7 */ - DB8500_PIN_SLEEP("GPIO154_C16", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I6 */ - DB8500_PIN_SLEEP("GPIO155_C19", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I5 */ - DB8500_PIN_SLEEP("GPIO156_C17", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I4 */ - DB8500_PIN_SLEEP("GPIO161_D21", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I3 */ - DB8500_PIN_SLEEP("GPIO162_D20", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I2 */ - DB8500_PIN_SLEEP("GPIO163_C20", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I1 */ - DB8500_PIN_SLEEP("GPIO164_B21", slpm_in_pu_wkup_pdis_en, "nmk-ske-keypad"), /* I0 */ - DB8500_PIN_SLEEP("GPIO157_A18", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O7 */ - DB8500_PIN_SLEEP("GPIO158_C18", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O6 */ - DB8500_PIN_SLEEP("GPIO159_B19", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O5 */ - DB8500_PIN_SLEEP("GPIO160_B20", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O4 */ - DB8500_PIN_SLEEP("GPIO165_C21", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O3 */ - DB8500_PIN_SLEEP("GPIO166_A22", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O2 */ - DB8500_PIN_SLEEP("GPIO167_B24", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O1 */ - DB8500_PIN_SLEEP("GPIO168_C22", slpm_out_lo_pdis, "nmk-ske-keypad"), /* O0 */ - - /* Mux in and drive the SDI0 DAT31DIR line high at runtime */ - DB8500_MUX("mc0dat31dir_a_1", "mc0", "sdi0"), - DB8500_PIN("GPIO21_AB3", out_hi, "sdi0"), -}; - -/* - * The HREFv60 series of platforms is using available pins on the DB8500 - * insteaf of the Toshiba I2C GPIO expander, reusing some pins like the SSP0 - * and SSP1 ports (previously connected to the AB8500) as generic GPIO lines. - */ -static struct pinctrl_map __initdata hrefv60_pinmap[] = { - /* Drive WLAN_ENA low */ - DB8500_PIN_HOG("GPIO85_D5", gpio_out_lo), /* WLAN_ENA */ - /* - * XENON Flashgun on image processor GPIO (controlled from image - * processor firmware), mux in these image processor GPIO lines 0 - * (XENON_FLASH_ID), 1 (XENON_READY) and there is an assistant - * LED on IP GPIO 4 (XENON_EN2) on altfunction C, that need bias - * from GPIO21 so pull up 0, 1 and drive 4 and GPIO21 low as output. - */ - DB8500_MUX_HOG("ipgpio0_c_1", "ipgpio"), - DB8500_MUX_HOG("ipgpio1_c_1", "ipgpio"), - DB8500_MUX_HOG("ipgpio4_c_1", "ipgpio"), - DB8500_PIN_HOG("GPIO6_AF6", in_pu), /* XENON_FLASH_ID */ - DB8500_PIN_HOG("GPIO7_AG5", in_pu), /* XENON_READY */ - DB8500_PIN_HOG("GPIO21_AB3", gpio_out_lo), /* XENON_EN1 */ - DB8500_PIN_HOG("GPIO64_F3", out_lo), /* XENON_EN2 */ - /* Magnetometer uses GPIO 31 and 32, pull these up/down respectively */ - DB8500_PIN_HOG("GPIO31_V3", gpio_in_pu), /* EN1 */ - DB8500_PIN_HOG("GPIO32_V2", gpio_in_pd), /* DRDY */ - /* - * Display Interface 1 uses GPIO 65 for RST (reset). - * Display Interface 2 uses GPIO 66 for RST (reset). - * Drive DISP1 reset high (not reset), driver DISP2 reset low (reset) - */ - DB8500_PIN_HOG("GPIO65_F1", gpio_out_hi), /* DISP1 NO RST */ - DB8500_PIN_HOG("GPIO66_G3", gpio_out_lo), /* DISP2 RST */ - /* - * Touch screen uses GPIO 143 for RST1, GPIO 146 for RST2 and - * GPIO 67 for interrupts. Pull-up the IRQ line and drive both - * reset signals low. - */ - DB8500_PIN_HOG("GPIO143_D12", gpio_out_lo), /* TOUCH_RST1 */ - DB8500_PIN_HOG("GPIO67_G2", gpio_in_pu), /* TOUCH_INT2 */ - DB8500_PIN_HOG("GPIO146_D13", gpio_out_lo), /* TOUCH_RST2 */ - /* - * Drive D19-D23 for the ETM PTM trace interface low, - * (presumably pins are unconnected therefore grounded here, - * the "other alt C1" setting enables these pins) - */ - DB8500_PIN_HOG("GPIO70_G5", gpio_out_lo), - DB8500_PIN_HOG("GPIO71_G4", gpio_out_lo), - DB8500_PIN_HOG("GPIO72_H4", gpio_out_lo), - DB8500_PIN_HOG("GPIO73_H3", gpio_out_lo), - DB8500_PIN_HOG("GPIO74_J3", gpio_out_lo), - /* NAHJ CTRL on GPIO 76 to low, CTRL_INV on GPIO216 to high */ - DB8500_PIN_HOG("GPIO76_J2", gpio_out_lo), /* CTRL */ - DB8500_PIN_HOG("GPIO216_AG12", gpio_out_hi), /* CTRL_INV */ - /* NFC ENA and RESET to low, pulldown IRQ line */ - DB8500_PIN_HOG("GPIO77_H1", gpio_out_lo), /* NFC_ENA */ - DB8500_PIN_HOG("GPIO144_B13", gpio_in_pd), /* NFC_IRQ */ - DB8500_PIN_HOG("GPIO142_C11", gpio_out_lo), /* NFC_RESET */ - /* - * SKE keyboard partly on alt A and partly on "Other alt C1" - * Driver KP_O1,2,3,6,7 low and pull up KP_I 0,2,3 for three - * rows of 6 keys, then pull up force sensing interrup and - * drive reset and force sensing WU low. - */ - DB8500_MUX_HOG("kp_a_1", "kp"), - DB8500_MUX_HOG("kp_oc1_1", "kp"), - DB8500_PIN_HOG("GPIO90_A3", out_lo), /* KP_O1 */ - DB8500_PIN_HOG("GPIO87_B3", out_lo), /* KP_O2 */ - DB8500_PIN_HOG("GPIO86_C6", out_lo), /* KP_O3 */ - DB8500_PIN_HOG("GPIO96_D8", out_lo), /* KP_O6 */ - DB8500_PIN_HOG("GPIO94_D7", out_lo), /* KP_O7 */ - DB8500_PIN_HOG("GPIO93_B7", in_pu), /* KP_I0 */ - DB8500_PIN_HOG("GPIO89_E6", in_pu), /* KP_I2 */ - DB8500_PIN_HOG("GPIO88_C4", in_pu), /* KP_I3 */ - DB8500_PIN_HOG("GPIO91_B6", gpio_in_pu), /* FORCE_SENSING_INT */ - DB8500_PIN_HOG("GPIO92_D6", gpio_out_lo), /* FORCE_SENSING_RST */ - DB8500_PIN_HOG("GPIO97_D9", gpio_out_lo), /* FORCE_SENSING_WU */ - /* DiPro Sensor interrupt */ - DB8500_PIN_HOG("GPIO139_C9", gpio_in_pu), /* DIPRO_INT */ - /* Audio Amplifier HF enable */ - DB8500_PIN_HOG("GPIO149_B14", gpio_out_hi), /* VAUDIO_HF_EN, enable MAX8968 */ - /* GBF interface, pull low to reset state */ - DB8500_PIN_HOG("GPIO171_D23", gpio_out_lo), /* GBF_ENA_RESET */ - /* MSP : HDTV INTERFACE GPIO line */ - DB8500_PIN_HOG("GPIO192_AJ27", gpio_in_pd), - /* Accelerometer interrupt lines */ - DB8500_PIN_HOG("GPIO82_C1", gpio_in_pu), /* ACC_INT1 */ - DB8500_PIN_HOG("GPIO83_D3", gpio_in_pu), /* ACC_INT2 */ - /* SD card detect GPIO pin */ - DB8500_PIN_HOG("GPIO95_E8", gpio_in_pu), - /* - * Runtime stuff - * Pull up/down of some sensor GPIO pins, for proximity, HAL sensor - * etc. - */ - DB8500_PIN("GPIO217_AH12", gpio_in_pu_slpm_gpio_nopull, "gpio-keys.0"), - DB8500_PIN("GPIO145_C13", gpio_in_pd_slpm_gpio_nopull, "gpio-keys.0"), - DB8500_PIN("GPIO139_C9", gpio_in_pu_slpm_gpio_nopull, "gpio-keys.0"), -}; - -static struct pinctrl_map __initdata u9500_pinmap[] = { - /* Mux in UART1 (just RX/TX) and set the pull-ups */ - DB8500_MUX_HOG("u1rxtx_a_1", "u1"), - DB8500_PIN_HOG("GPIO4_AH6", in_pu), - DB8500_PIN_HOG("GPIO5_AG6", out_hi), - /* WLAN_IRQ line */ - DB8500_PIN_HOG("GPIO144_B13", gpio_in_pu), - /* HSI */ - DB8500_MUX_HOG("hsir_a_1", "hsi"), - DB8500_MUX_HOG("hsit_a_2", "hsi"), - DB8500_PIN_HOG("GPIO219_AG10", in_pd), /* RX FLA0 */ - DB8500_PIN_HOG("GPIO220_AH10", in_pd), /* RX DAT0 */ - DB8500_PIN_HOG("GPIO221_AJ11", out_lo), /* RX RDY0 */ - DB8500_PIN_HOG("GPIO222_AJ9", out_lo), /* TX FLA0 */ - DB8500_PIN_HOG("GPIO223_AH9", out_lo), /* TX DAT0 */ - DB8500_PIN_HOG("GPIO224_AG9", in_pd), /* TX RDY0 */ - DB8500_PIN_HOG("GPIO225_AG8", in_pd), /* CAWAKE0 */ - DB8500_PIN_HOG("GPIO226_AF8", gpio_out_hi), /* ACWAKE0 */ -}; - -static struct pinctrl_map __initdata u8500_pinmap[] = { - DB8500_PIN_HOG("GPIO226_AF8", gpio_out_lo), /* WLAN_PMU_EN */ - DB8500_PIN_HOG("GPIO4_AH6", gpio_in_pu), /* WLAN_IRQ */ -}; - -static struct pinctrl_map __initdata snowball_pinmap[] = { - /* Mux in SSP0 connected to AB8500, pull down RXD pin */ - DB8500_MUX_HOG("ssp0_a_1", "ssp0"), - DB8500_PIN_HOG("GPIO145_C13", pd), - /* Always drive the MC0 DAT31DIR line high on these boards */ - DB8500_PIN_HOG("GPIO21_AB3", out_hi), - /* Mux in "SM" which is used for the SMSC911x Ethernet adapter */ - DB8500_MUX_HOG("sm_b_1", "sm"), - /* User LED */ - DB8500_PIN_HOG("GPIO142_C11", gpio_out_hi), - /* Drive RSTn_LAN high */ - DB8500_PIN_HOG("GPIO141_C12", gpio_out_hi), - /* Accelerometer/Magnetometer */ - DB8500_PIN_HOG("GPIO163_C20", gpio_in_pu), /* ACCEL_IRQ1 */ - DB8500_PIN_HOG("GPIO164_B21", gpio_in_pu), /* ACCEL_IRQ2 */ - DB8500_PIN_HOG("GPIO165_C21", gpio_in_pu), /* MAG_DRDY */ - /* WLAN/GBF */ - DB8500_PIN_HOG("GPIO161_D21", gpio_out_lo), /* WLAN_PMU_EN */ - DB8500_PIN_HOG("GPIO171_D23", gpio_out_hi), /* GBF_ENA */ - DB8500_PIN_HOG("GPIO215_AH13", gpio_out_lo), /* WLAN_ENA */ - DB8500_PIN_HOG("GPIO216_AG12", gpio_in_pu), /* WLAN_IRQ */ -}; - -/* - * passing "pinsfor=" in kernel cmdline allows for custom - * configuration of GPIOs on u8500 derived boards. - */ -static int __init early_pinsfor(char *p) -{ - pinsfor = PINS_FOR_DEFAULT; - - if (strcmp(p, "u9500-21") == 0) - pinsfor = PINS_FOR_U9500; - - return 0; -} -early_param("pinsfor", early_pinsfor); - -int pins_for_u9500(void) -{ - if (pinsfor == PINS_FOR_U9500) - return 1; - - return 0; -} - -static void __init mop500_href_family_pinmaps_init(void) -{ - switch (pinsfor) { - case PINS_FOR_U9500: - pinctrl_register_mappings(u9500_pinmap, - ARRAY_SIZE(u9500_pinmap)); - break; - case PINS_FOR_DEFAULT: - pinctrl_register_mappings(u8500_pinmap, - ARRAY_SIZE(u8500_pinmap)); - default: - break; - } -} - void __init mop500_pinmaps_init(void) { - pinctrl_register_mappings(mop500_family_pinmap, - ARRAY_SIZE(mop500_family_pinmap)); - pinctrl_register_mappings(mop500_pinmap, - ARRAY_SIZE(mop500_pinmap)); - mop500_href_family_pinmaps_init(); if (machine_is_u8520()) pinctrl_register_mappings(ab8505_pinmap, ARRAY_SIZE(ab8505_pinmap)); @@ -1073,23 +280,12 @@ void __init mop500_pinmaps_init(void) void __init snowball_pinmaps_init(void) { - pinctrl_register_mappings(mop500_family_pinmap, - ARRAY_SIZE(mop500_family_pinmap)); - pinctrl_register_mappings(snowball_pinmap, - ARRAY_SIZE(snowball_pinmap)); - pinctrl_register_mappings(u8500_pinmap, - ARRAY_SIZE(u8500_pinmap)); pinctrl_register_mappings(ab8500_pinmap, ARRAY_SIZE(ab8500_pinmap)); } void __init hrefv60_pinmaps_init(void) { - pinctrl_register_mappings(mop500_family_pinmap, - ARRAY_SIZE(mop500_family_pinmap)); - pinctrl_register_mappings(hrefv60_pinmap, - ARRAY_SIZE(hrefv60_pinmap)); - mop500_href_family_pinmaps_init(); pinctrl_register_mappings(ab8500_pinmap, ARRAY_SIZE(ab8500_pinmap)); } diff --git a/arch/arm/mach-ux500/board-mop500-regulators.c b/arch/arm/mach-ux500/board-mop500-regulators.c index 0dc44c6..a4e139a 100644 --- a/arch/arm/mach-ux500/board-mop500-regulators.c +++ b/arch/arm/mach-ux500/board-mop500-regulators.c @@ -30,20 +30,6 @@ struct regulator_init_data gpio_en_3v3_regulator = { .consumer_supplies = gpio_en_3v3_consumers, }; -static struct regulator_consumer_supply sdi0_reg_consumers[] = { - REGULATOR_SUPPLY("vqmmc", "sdi0"), -}; - -struct regulator_init_data sdi0_reg_init_data = { - .constraints = { - .min_uV = 1800000, - .max_uV = 2900000, - .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE|REGULATOR_CHANGE_STATUS, - }, - .num_consumer_supplies = ARRAY_SIZE(sdi0_reg_consumers), - .consumer_supplies = sdi0_reg_consumers, -}; - /* * TPS61052 regulator */ diff --git a/arch/arm/mach-ux500/board-mop500-regulators.h b/arch/arm/mach-ux500/board-mop500-regulators.h index 039f513..9bece38 100644 --- a/arch/arm/mach-ux500/board-mop500-regulators.h +++ b/arch/arm/mach-ux500/board-mop500-regulators.h @@ -18,7 +18,6 @@ extern struct ab8500_regulator_platform_data ab8500_regulator_plat_data; extern struct ab8500_regulator_platform_data ab8505_regulator_plat_data; extern struct regulator_init_data tps61052_regulator; extern struct regulator_init_data gpio_en_3v3_regulator; -extern struct regulator_init_data sdi0_reg_init_data; void mop500_regulator_init(void); diff --git a/arch/arm/mach-ux500/board-mop500-sdi.c b/arch/arm/mach-ux500/board-mop500-sdi.c index 26600a1..fcbf3a1 100644 --- a/arch/arm/mach-ux500/board-mop500-sdi.c +++ b/arch/arm/mach-ux500/board-mop500-sdi.c @@ -14,10 +14,8 @@ #include <linux/platform_data/dma-ste-dma40.h> #include <asm/mach-types.h> -#include "devices.h" #include "db8500-regs.h" -#include "devices-db8500.h" #include "board-mop500.h" #include "ste-dma40-db8500.h" diff --git a/arch/arm/mach-ux500/board-mop500.c b/arch/arm/mach-ux500/board-mop500.c deleted file mode 100644 index 514d40b..0000000 --- a/arch/arm/mach-ux500/board-mop500.c +++ /dev/null @@ -1,78 +0,0 @@ -/* - * Copyright (C) 2008-2012 ST-Ericsson - * - * Author: Srinidhi KASAGAR <srinidhi.kasagar@stericsson.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2, as - * published by the Free Software Foundation. - * - */ -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/interrupt.h> -#include <linux/platform_device.h> -#include <linux/clk.h> -#include <linux/io.h> -#include <linux/platform_data/db8500_thermal.h> -#include <linux/amba/bus.h> -#include <linux/amba/pl022.h> -#include <linux/mfd/abx500/ab8500.h> -#include <linux/regulator/ab8500.h> -#include <linux/regulator/fixed.h> -#include <linux/regulator/driver.h> -#include <linux/mfd/tps6105x.h> -#include <linux/platform_data/leds-lp55xx.h> -#include <linux/input.h> -#include <linux/delay.h> -#include <linux/leds.h> -#include <linux/pinctrl/consumer.h> -#include <linux/platform_data/pinctrl-nomadik.h> -#include <linux/platform_data/dma-ste-dma40.h> - -#include <asm/mach-types.h> - -#include "setup.h" -#include "devices.h" -#include "irqs.h" - -#include "ste-dma40-db8500.h" -#include "db8500-regs.h" -#include "devices-db8500.h" -#include "board-mop500.h" -#include "board-mop500-regulators.h" - -struct ab8500_platform_data ab8500_platdata = { - .irq_base = MOP500_AB8500_IRQ_BASE, - .regulator = &ab8500_regulator_plat_data, -}; - -#ifdef CONFIG_STE_DMA40 -static struct stedma40_chan_cfg ssp0_dma_cfg_rx = { - .mode = STEDMA40_MODE_LOGICAL, - .dir = DMA_DEV_TO_MEM, - .dev_type = DB8500_DMA_DEV8_SSP0, -}; - -static struct stedma40_chan_cfg ssp0_dma_cfg_tx = { - .mode = STEDMA40_MODE_LOGICAL, - .dir = DMA_MEM_TO_DEV, - .dev_type = DB8500_DMA_DEV8_SSP0, -}; -#endif - -struct pl022_ssp_controller ssp0_plat = { - .bus_id = 0, -#ifdef CONFIG_STE_DMA40 - .enable_dma = 1, - .dma_filter = stedma40_filter, - .dma_rx_param = &ssp0_dma_cfg_rx, - .dma_tx_param = &ssp0_dma_cfg_tx, -#else - .enable_dma = 0, -#endif - /* on this platform, gpio 31,142,144,214 & - * 224 are connected as chip selects - */ - .num_chipselect = 5, -}; diff --git a/arch/arm/mach-ux500/board-mop500.h b/arch/arm/mach-ux500/board-mop500.h index 511d6fe..d48e866 100644 --- a/arch/arm/mach-ux500/board-mop500.h +++ b/arch/arm/mach-ux500/board-mop500.h @@ -87,7 +87,6 @@ extern struct msp_i2s_platform_data msp0_platform_data; extern struct msp_i2s_platform_data msp1_platform_data; extern struct msp_i2s_platform_data msp2_platform_data; extern struct msp_i2s_platform_data msp3_platform_data; -extern struct pl022_ssp_controller ssp0_plat; void __init mop500_pinmaps_init(void); void __init snowball_pinmaps_init(void); diff --git a/arch/arm/mach-ux500/cpu-db8500.c b/arch/arm/mach-ux500/cpu-db8500.c index 12c7e5c..bc8a618 100644 --- a/arch/arm/mach-ux500/cpu-db8500.c +++ b/arch/arm/mach-ux500/cpu-db8500.c @@ -21,21 +21,32 @@ #include <linux/of.h> #include <linux/of_platform.h> #include <linux/regulator/machine.h> -#include <linux/platform_data/pinctrl-nomadik.h> #include <linux/random.h> #include <asm/pmu.h> #include <asm/mach/map.h> #include "setup.h" -#include "devices.h" #include "irqs.h" -#include "devices-db8500.h" -#include "db8500-regs.h" +#include "board-mop500-regulators.h" #include "board-mop500.h" +#include "db8500-regs.h" #include "id.h" +struct ab8500_platform_data ab8500_platdata = { + .irq_base = MOP500_AB8500_IRQ_BASE, + .regulator = &ab8500_regulator_plat_data, +}; + +struct prcmu_pdata db8500_prcmu_pdata = { + .ab_platdata = &ab8500_platdata, + .ab_irq = IRQ_DB8500_AB8500, + .irq_base = IRQ_PRCMU_BASE, + .version_offset = DB8500_PRCMU_FW_VERSION_OFFSET, + .legacy_offset = DB8500_PRCMU_LEGACY_OFFSET, +}; + /* minimum static i/o mapping required to boot U8500 platforms */ static struct map_desc u8500_uart_io_desc[] __initdata = { __IO_DEV_DESC(U8500_UART0_BASE, SZ_4K), @@ -159,17 +170,10 @@ static struct of_dev_auxdata u8500_auxdata_lookup[] __initdata = { OF_DEV_AUXDATA("stericsson,ux500-hash", 0xa03c2000, "hash1", NULL), OF_DEV_AUXDATA("stericsson,snd-soc-mop500", 0, "snd-soc-mop500.0", NULL), - /* Requires device name bindings. */ - OF_DEV_AUXDATA("stericsson,db8500-pinctrl", U8500_PRCMU_BASE, - "pinctrl-db8500", NULL), {}, }; static struct of_dev_auxdata u8540_auxdata_lookup[] __initdata = { - /* Requires DMA bindings. */ - OF_DEV_AUXDATA("arm,pl011", 0x80120000, "uart0", NULL), - OF_DEV_AUXDATA("arm,pl011", 0x80121000, "uart1", NULL), - OF_DEV_AUXDATA("arm,pl011", 0x80007000, "uart2", NULL), OF_DEV_AUXDATA("stericsson,db8500-prcmu", 0x80157000, "db8500-prcmu", &db8500_prcmu_pdata), {}, diff --git a/arch/arm/mach-ux500/cpu.c b/arch/arm/mach-ux500/cpu.c index f84d439..d11ac4b 100644 --- a/arch/arm/mach-ux500/cpu.c +++ b/arch/arm/mach-ux500/cpu.c @@ -25,7 +25,6 @@ #include <asm/mach/map.h> #include "setup.h" -#include "devices.h" #include "board-mop500.h" #include "db8500-regs.h" @@ -64,12 +63,7 @@ void __init ux500_init_irq(void) } else ux500_unknown_soc(); -#ifdef CONFIG_OF - if (of_have_populated_dt()) - irqchip_init(); - else -#endif - gic_init(0, 29, dist_base, cpu_base); + irqchip_init(); /* * Init clocks here so that they are available for system timer @@ -79,16 +73,11 @@ void __init ux500_init_irq(void) prcmu_early_init(U8500_PRCMU_BASE, SZ_8K - 1); ux500_pm_init(U8500_PRCMU_BASE, SZ_8K - 1); - if (of_have_populated_dt()) - u8500_of_clk_init(U8500_CLKRST1_BASE, - U8500_CLKRST2_BASE, - U8500_CLKRST3_BASE, - U8500_CLKRST5_BASE, - U8500_CLKRST6_BASE); - else - u8500_clk_init(U8500_CLKRST1_BASE, U8500_CLKRST2_BASE, - U8500_CLKRST3_BASE, U8500_CLKRST5_BASE, - U8500_CLKRST6_BASE); + u8500_of_clk_init(U8500_CLKRST1_BASE, + U8500_CLKRST2_BASE, + U8500_CLKRST3_BASE, + U8500_CLKRST5_BASE, + U8500_CLKRST6_BASE); } else if (cpu_is_u9540()) { prcmu_early_init(U8500_PRCMU_BASE, SZ_8K - 1); ux500_pm_init(U8500_PRCMU_BASE, SZ_8K - 1); diff --git a/arch/arm/mach-ux500/devices-db8500.c b/arch/arm/mach-ux500/devices-db8500.c deleted file mode 100644 index c59f89d..0000000 --- a/arch/arm/mach-ux500/devices-db8500.c +++ /dev/null @@ -1,28 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson - * License terms: GNU General Public License (GPL) version 2 - */ - -#include <linux/kernel.h> -#include <linux/platform_device.h> -#include <linux/interrupt.h> -#include <linux/io.h> -#include <linux/amba/bus.h> -#include <linux/amba/pl022.h> -#include <linux/mfd/dbx500-prcmu.h> - -#include "setup.h" -#include "irqs.h" - -#include "db8500-regs.h" -#include "devices-db8500.h" - -struct prcmu_pdata db8500_prcmu_pdata = { - .ab_platdata = &ab8500_platdata, - .ab_irq = IRQ_DB8500_AB8500, - .irq_base = IRQ_PRCMU_BASE, - .version_offset = DB8500_PRCMU_FW_VERSION_OFFSET, - .legacy_offset = DB8500_PRCMU_LEGACY_OFFSET, -}; diff --git a/arch/arm/mach-ux500/devices-db8500.h b/arch/arm/mach-ux500/devices-db8500.h deleted file mode 100644 index b8ffc99..0000000 --- a/arch/arm/mach-ux500/devices-db8500.h +++ /dev/null @@ -1,19 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson - * License terms: GNU General Public License (GPL), version 2. - */ - -#ifndef __DEVICES_DB8500_H -#define __DEVICES_DB8500_H - -#include "irqs.h" -#include "db8500-regs.h" - -struct platform_device; - -extern struct ab8500_platform_data ab8500_platdata; -extern struct prcmu_pdata db8500_prcmu_pdata; - -#endif diff --git a/arch/arm/mach-ux500/devices.c b/arch/arm/mach-ux500/devices.c deleted file mode 100644 index 0f9e52b..0000000 --- a/arch/arm/mach-ux500/devices.c +++ /dev/null @@ -1,26 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * Author: Rabin Vincent <rabin.vincent@stericsson.com> for ST-Ericsson - * License terms: GNU General Public License (GPL) version 2 - */ - -#include <linux/kernel.h> -#include <linux/platform_device.h> -#include <linux/interrupt.h> -#include <linux/io.h> -#include <linux/amba/bus.h> - -#include "setup.h" - -#include "db8500-regs.h" - -void __init amba_add_devices(struct amba_device *devs[], int num) -{ - int i; - - for (i = 0; i < num; i++) { - struct amba_device *d = devs[i]; - amba_device_register(d, &iomem_resource); - } -} diff --git a/arch/arm/mach-ux500/devices.h b/arch/arm/mach-ux500/devices.h deleted file mode 100644 index 5bca7c6..0000000 --- a/arch/arm/mach-ux500/devices.h +++ /dev/null @@ -1,15 +0,0 @@ -/* - * Copyright (C) ST-Ericsson SA 2010 - * - * License terms: GNU General Public License (GPL) version 2 - */ - -#ifndef __ASM_ARCH_DEVICES_H__ -#define __ASM_ARCH_DEVICES_H__ - -struct platform_device; -struct amba_device; - -extern struct amba_device ux500_pl031_device; - -#endif diff --git a/arch/arm/mach-ux500/setup.h b/arch/arm/mach-ux500/setup.h index b1dd858..2dea8b5 100644 --- a/arch/arm/mach-ux500/setup.h +++ b/arch/arm/mach-ux500/setup.h @@ -19,17 +19,11 @@ void ux500_restart(enum reboot_mode mode, const char *cmd); void __init ux500_map_io(void); -extern void __init u8500_map_io(void); - -extern struct device * __init u8500_init_devices(void); extern void __init ux500_init_irq(void); extern struct device *ux500_soc_device_init(const char *soc_id); -struct amba_device; -extern void __init amba_add_devices(struct amba_device *devs[], int num); - extern void ux500_timer_init(void); #define __IO_DEV_DESC(x, sz) { \ diff --git a/arch/arm/mach-ux500/timer.c b/arch/arm/mach-ux500/timer.c index 05a4ff7..87efda0 100644 --- a/arch/arm/mach-ux500/timer.c +++ b/arch/arm/mach-ux500/timer.c @@ -10,40 +10,12 @@ #include <linux/clocksource.h> #include <linux/of.h> #include <linux/of_address.h> -#include <linux/platform_data/clocksource-nomadik-mtu.h> - -#include <asm/smp_twd.h> #include "setup.h" -#include "irqs.h" #include "db8500-regs.h" #include "id.h" -#ifdef CONFIG_HAVE_ARM_TWD -static DEFINE_TWD_LOCAL_TIMER(u8500_twd_local_timer, - U8500_TWD_BASE, IRQ_LOCALTIMER); - -static void __init ux500_twd_init(void) -{ - struct twd_local_timer *twd_local_timer; - int err; - - /* Use this to switch local timer base if changed in new ASICs */ - twd_local_timer = &u8500_twd_local_timer; - - if (of_have_populated_dt()) - clocksource_of_init(); - else { - err = twd_local_timer_register(twd_local_timer); - if (err) - pr_err("twd_local_timer_register failed %d\n", err); - } -} -#else -#define ux500_twd_init() do { } while(0) -#endif - const static struct of_device_id prcmu_timer_of_match[] __initconst = { { .compatible = "stericsson,db8500-prcmu-timer-4", }, { }, @@ -51,54 +23,26 @@ const static struct of_device_id prcmu_timer_of_match[] __initconst = { void __init ux500_timer_init(void) { - void __iomem *mtu_timer_base; void __iomem *prcmu_timer_base; void __iomem *tmp_base; struct device_node *np; - if (cpu_is_u8500_family() || cpu_is_ux540_family()) { - mtu_timer_base = __io_address(U8500_MTU0_BASE); + if (cpu_is_u8500_family() || cpu_is_ux540_family()) prcmu_timer_base = __io_address(U8500_PRCMU_TIMER_4_BASE); - } else { + else ux500_unknown_soc(); - } - /* TODO: Once MTU has been DT:ed place code above into else. */ - if (of_have_populated_dt()) { -#ifdef CONFIG_OF - np = of_find_matching_node(NULL, prcmu_timer_of_match); - if (!np) -#endif - goto dt_fail; + np = of_find_matching_node(NULL, prcmu_timer_of_match); + if (!np) + goto dt_fail; - tmp_base = of_iomap(np, 0); - if (!tmp_base) - goto dt_fail; + tmp_base = of_iomap(np, 0); + if (!tmp_base) + goto dt_fail; - prcmu_timer_base = tmp_base; - } + prcmu_timer_base = tmp_base; dt_fail: - /* Doing it the old fashioned way. */ - - /* - * Here we register the timerblocks active in the system. - * Localtimers (twd) is started when both cpu is up and running. - * MTU register a clocksource, clockevent and sched_clock. - * Since the MTU is located in the VAPE power domain - * it will be cleared in sleep which makes it unsuitable. - * We however need it as a timer tick (clockevent) - * during boot to calibrate delay until twd is started. - * RTC-RTT have problems as timer tick during boot since it is - * depending on delay which is not yet calibrated. RTC-RTT is in the - * always-on powerdomain and is used as clockevent instead of twd when - * sleeping. - * The PRCMU timer 4 register a clocksource and - * sched_clock with higher rating then MTU since is always-on. - * - */ - if (!of_have_populated_dt()) - nmdk_timer_init(mtu_timer_base, IRQ_MTU0); clksrc_dbx500_prcmu_init(prcmu_timer_base); - ux500_twd_init(); + clocksource_of_init(); } diff --git a/drivers/clk/Makefile b/drivers/clk/Makefile index ace7309..a3b7c5d 100644 --- a/drivers/clk/Makefile +++ b/drivers/clk/Makefile @@ -36,6 +36,7 @@ obj-$(CONFIG_PLAT_SAMSUNG) += samsung/ obj-$(CONFIG_COMMON_CLK_XGENE) += clk-xgene.o obj-$(CONFIG_COMMON_CLK_KEYSTONE) += keystone/ obj-$(CONFIG_COMMON_CLK_AT91) += at91/ +obj-$(CONFIG_ARCH_SHMOBILE_MULTI) += shmobile/ obj-$(CONFIG_X86) += x86/ diff --git a/drivers/clk/shmobile/Makefile b/drivers/clk/shmobile/Makefile new file mode 100644 index 0000000..706adc6 --- /dev/null +++ b/drivers/clk/shmobile/Makefile @@ -0,0 +1,7 @@ +obj-$(CONFIG_ARCH_R8A7790) += clk-rcar-gen2.o +obj-$(CONFIG_ARCH_R8A7791) += clk-rcar-gen2.o +obj-$(CONFIG_ARCH_SHMOBILE_MULTI) += clk-div6.o +obj-$(CONFIG_ARCH_SHMOBILE_MULTI) += clk-mstp.o + +# for emply built-in.o +obj-n := dummy diff --git a/drivers/clk/shmobile/clk-div6.c b/drivers/clk/shmobile/clk-div6.c new file mode 100644 index 0000000..aac4756 --- /dev/null +++ b/drivers/clk/shmobile/clk-div6.c @@ -0,0 +1,185 @@ +/* + * r8a7790 Common Clock Framework support + * + * Copyright (C) 2013 Renesas Solutions Corp. + * + * Contact: Laurent Pinchart <laurent.pinchart@ideasonboard.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + */ + +#include <linux/clk-provider.h> +#include <linux/clkdev.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/kernel.h> +#include <linux/of.h> +#include <linux/of_address.h> + +#define CPG_DIV6_CKSTP BIT(8) +#define CPG_DIV6_DIV(d) ((d) & 0x3f) +#define CPG_DIV6_DIV_MASK 0x3f + +/** + * struct div6_clock - MSTP gating clock + * @hw: handle between common and hardware-specific interfaces + * @reg: IO-remapped register + * @div: divisor value (1-64) + */ +struct div6_clock { + struct clk_hw hw; + void __iomem *reg; + unsigned int div; +}; + +#define to_div6_clock(_hw) container_of(_hw, struct div6_clock, hw) + +static int cpg_div6_clock_enable(struct clk_hw *hw) +{ + struct div6_clock *clock = to_div6_clock(hw); + + clk_writel(CPG_DIV6_DIV(clock->div - 1), clock->reg); + + return 0; +} + +static void cpg_div6_clock_disable(struct clk_hw *hw) +{ + struct div6_clock *clock = to_div6_clock(hw); + + /* DIV6 clocks require the divisor field to be non-zero when stopping + * the clock. + */ + clk_writel(CPG_DIV6_CKSTP | CPG_DIV6_DIV(CPG_DIV6_DIV_MASK), + clock->reg); +} + +static int cpg_div6_clock_is_enabled(struct clk_hw *hw) +{ + struct div6_clock *clock = to_div6_clock(hw); + + return !(clk_readl(clock->reg) & CPG_DIV6_CKSTP); +} + +static unsigned long cpg_div6_clock_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct div6_clock *clock = to_div6_clock(hw); + unsigned int div = (clk_readl(clock->reg) & CPG_DIV6_DIV_MASK) + 1; + + return parent_rate / div; +} + +static unsigned int cpg_div6_clock_calc_div(unsigned long rate, + unsigned long parent_rate) +{ + unsigned int div; + + div = DIV_ROUND_CLOSEST(parent_rate, rate); + return clamp_t(unsigned int, div, 1, 64); +} + +static long cpg_div6_clock_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *parent_rate) +{ + unsigned int div = cpg_div6_clock_calc_div(rate, *parent_rate); + + return *parent_rate / div; +} + +static int cpg_div6_clock_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct div6_clock *clock = to_div6_clock(hw); + unsigned int div = cpg_div6_clock_calc_div(rate, parent_rate); + + clock->div = div; + + /* Only program the new divisor if the clock isn't stopped. */ + if (!(clk_readl(clock->reg) & CPG_DIV6_CKSTP)) + clk_writel(CPG_DIV6_DIV(clock->div - 1), clock->reg); + + return 0; +} + +static const struct clk_ops cpg_div6_clock_ops = { + .enable = cpg_div6_clock_enable, + .disable = cpg_div6_clock_disable, + .is_enabled = cpg_div6_clock_is_enabled, + .recalc_rate = cpg_div6_clock_recalc_rate, + .round_rate = cpg_div6_clock_round_rate, + .set_rate = cpg_div6_clock_set_rate, +}; + +static void __init cpg_div6_clock_init(struct device_node *np) +{ + struct clk_init_data init; + struct div6_clock *clock; + const char *parent_name; + const char *name; + struct clk *clk; + int ret; + + clock = kzalloc(sizeof(*clock), GFP_KERNEL); + if (!clock) { + pr_err("%s: failed to allocate %s DIV6 clock\n", + __func__, np->name); + return; + } + + /* Remap the clock register and read the divisor. Disabling the + * clock overwrites the divisor, so we need to cache its value for the + * enable operation. + */ + clock->reg = of_iomap(np, 0); + if (clock->reg == NULL) { + pr_err("%s: failed to map %s DIV6 clock register\n", + __func__, np->name); + goto error; + } + + clock->div = (clk_readl(clock->reg) & CPG_DIV6_DIV_MASK) + 1; + + /* Parse the DT properties. */ + ret = of_property_read_string(np, "clock-output-names", &name); + if (ret < 0) { + pr_err("%s: failed to get %s DIV6 clock output name\n", + __func__, np->name); + goto error; + } + + parent_name = of_clk_get_parent_name(np, 0); + if (parent_name == NULL) { + pr_err("%s: failed to get %s DIV6 clock parent name\n", + __func__, np->name); + goto error; + } + + /* Register the clock. */ + init.name = name; + init.ops = &cpg_div6_clock_ops; + init.flags = CLK_IS_BASIC; + init.parent_names = &parent_name; + init.num_parents = 1; + + clock->hw.init = &init; + + clk = clk_register(NULL, &clock->hw); + if (IS_ERR(clk)) { + pr_err("%s: failed to register %s DIV6 clock (%ld)\n", + __func__, np->name, PTR_ERR(clk)); + goto error; + } + + of_clk_add_provider(np, of_clk_src_simple_get, clk); + + return; + +error: + if (clock->reg) + iounmap(clock->reg); + kfree(clock); +} +CLK_OF_DECLARE(cpg_div6_clk, "renesas,cpg-div6-clock", cpg_div6_clock_init); diff --git a/drivers/clk/shmobile/clk-mstp.c b/drivers/clk/shmobile/clk-mstp.c new file mode 100644 index 0000000..e576b60 --- /dev/null +++ b/drivers/clk/shmobile/clk-mstp.c @@ -0,0 +1,229 @@ +/* + * R-Car MSTP clocks + * + * Copyright (C) 2013 Ideas On Board SPRL + * + * Contact: Laurent Pinchart <laurent.pinchart@ideasonboard.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + */ + +#include <linux/clk-provider.h> +#include <linux/clkdev.h> +#include <linux/io.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/spinlock.h> + +/* + * MSTP clocks. We can't use standard gate clocks as we need to poll on the + * status register when enabling the clock. + */ + +#define MSTP_MAX_CLOCKS 32 + +/** + * struct mstp_clock_group - MSTP gating clocks group + * + * @data: clocks in this group + * @smstpcr: module stop control register + * @mstpsr: module stop status register (optional) + * @lock: protects writes to SMSTPCR + */ +struct mstp_clock_group { + struct clk_onecell_data data; + void __iomem *smstpcr; + void __iomem *mstpsr; + spinlock_t lock; +}; + +/** + * struct mstp_clock - MSTP gating clock + * @hw: handle between common and hardware-specific interfaces + * @bit_index: control bit index + * @group: MSTP clocks group + */ +struct mstp_clock { + struct clk_hw hw; + u32 bit_index; + struct mstp_clock_group *group; +}; + +#define to_mstp_clock(_hw) container_of(_hw, struct mstp_clock, hw) + +static int cpg_mstp_clock_endisable(struct clk_hw *hw, bool enable) +{ + struct mstp_clock *clock = to_mstp_clock(hw); + struct mstp_clock_group *group = clock->group; + u32 bitmask = BIT(clock->bit_index); + unsigned long flags; + unsigned int i; + u32 value; + + spin_lock_irqsave(&group->lock, flags); + + value = clk_readl(group->smstpcr); + if (enable) + value &= ~bitmask; + else + value |= bitmask; + clk_writel(value, group->smstpcr); + + spin_unlock_irqrestore(&group->lock, flags); + + if (!enable || !group->mstpsr) + return 0; + + for (i = 1000; i > 0; --i) { + if (!(clk_readl(group->mstpsr) & bitmask)) + break; + cpu_relax(); + } + + if (!i) { + pr_err("%s: failed to enable %p[%d]\n", __func__, + group->smstpcr, clock->bit_index); + return -ETIMEDOUT; + } + + return 0; +} + +static int cpg_mstp_clock_enable(struct clk_hw *hw) +{ + return cpg_mstp_clock_endisable(hw, true); +} + +static void cpg_mstp_clock_disable(struct clk_hw *hw) +{ + cpg_mstp_clock_endisable(hw, false); +} + +static int cpg_mstp_clock_is_enabled(struct clk_hw *hw) +{ + struct mstp_clock *clock = to_mstp_clock(hw); + struct mstp_clock_group *group = clock->group; + u32 value; + + if (group->mstpsr) + value = clk_readl(group->mstpsr); + else + value = clk_readl(group->smstpcr); + + return !!(value & BIT(clock->bit_index)); +} + +static const struct clk_ops cpg_mstp_clock_ops = { + .enable = cpg_mstp_clock_enable, + .disable = cpg_mstp_clock_disable, + .is_enabled = cpg_mstp_clock_is_enabled, +}; + +static struct clk * __init +cpg_mstp_clock_register(const char *name, const char *parent_name, + unsigned int index, struct mstp_clock_group *group) +{ + struct clk_init_data init; + struct mstp_clock *clock; + struct clk *clk; + + clock = kzalloc(sizeof(*clock), GFP_KERNEL); + if (!clock) { + pr_err("%s: failed to allocate MSTP clock.\n", __func__); + return ERR_PTR(-ENOMEM); + } + + init.name = name; + init.ops = &cpg_mstp_clock_ops; + init.flags = CLK_IS_BASIC; + init.parent_names = &parent_name; + init.num_parents = 1; + + clock->bit_index = index; + clock->group = group; + clock->hw.init = &init; + + clk = clk_register(NULL, &clock->hw); + + if (IS_ERR(clk)) + kfree(clock); + + return clk; +} + +static void __init cpg_mstp_clocks_init(struct device_node *np) +{ + struct mstp_clock_group *group; + struct clk **clks; + unsigned int i; + + group = kzalloc(sizeof(*group), GFP_KERNEL); + clks = kzalloc(MSTP_MAX_CLOCKS * sizeof(*clks), GFP_KERNEL); + if (group == NULL || clks == NULL) { + kfree(group); + kfree(clks); + pr_err("%s: failed to allocate group\n", __func__); + return; + } + + spin_lock_init(&group->lock); + group->data.clks = clks; + + group->smstpcr = of_iomap(np, 0); + group->mstpsr = of_iomap(np, 1); + + if (group->smstpcr == NULL) { + pr_err("%s: failed to remap SMSTPCR\n", __func__); + kfree(group); + kfree(clks); + return; + } + + for (i = 0; i < MSTP_MAX_CLOCKS; ++i) { + const char *parent_name; + const char *name; + u32 clkidx; + int ret; + + /* Skip clocks with no name. */ + ret = of_property_read_string_index(np, "clock-output-names", + i, &name); + if (ret < 0 || strlen(name) == 0) + continue; + + parent_name = of_clk_get_parent_name(np, i); + ret = of_property_read_u32_index(np, "renesas,clock-indices", i, + &clkidx); + if (parent_name == NULL || ret < 0) + break; + + if (clkidx >= MSTP_MAX_CLOCKS) { + pr_err("%s: invalid clock %s %s index %u)\n", + __func__, np->name, name, clkidx); + continue; + } + + clks[clkidx] = cpg_mstp_clock_register(name, parent_name, i, + group); + if (!IS_ERR(clks[clkidx])) { + group->data.clk_num = max(group->data.clk_num, clkidx); + /* + * Register a clkdev to let board code retrieve the + * clock by name and register aliases for non-DT + * devices. + * + * FIXME: Remove this when all devices that require a + * clock will be instantiated from DT. + */ + clk_register_clkdev(clks[clkidx], name, NULL); + } else { + pr_err("%s: failed to register %s %s clock (%ld)\n", + __func__, np->name, name, PTR_ERR(clks[clkidx])); + } + } + + of_clk_add_provider(np, of_clk_src_onecell_get, &group->data); +} +CLK_OF_DECLARE(cpg_mstp_clks, "renesas,cpg-mstp-clocks", cpg_mstp_clocks_init); diff --git a/drivers/clk/shmobile/clk-rcar-gen2.c b/drivers/clk/shmobile/clk-rcar-gen2.c new file mode 100644 index 0000000..a59ec21 --- /dev/null +++ b/drivers/clk/shmobile/clk-rcar-gen2.c @@ -0,0 +1,298 @@ +/* + * rcar_gen2 Core CPG Clocks + * + * Copyright (C) 2013 Ideas On Board SPRL + * + * Contact: Laurent Pinchart <laurent.pinchart@ideasonboard.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; version 2 of the License. + */ + +#include <linux/clk-provider.h> +#include <linux/clkdev.h> +#include <linux/clk/shmobile.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/math64.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/spinlock.h> + +struct rcar_gen2_cpg { + struct clk_onecell_data data; + spinlock_t lock; + void __iomem *reg; +}; + +#define CPG_SDCKCR 0x00000074 +#define CPG_PLL0CR 0x000000d8 +#define CPG_FRQCRC 0x000000e0 +#define CPG_FRQCRC_ZFC_MASK (0x1f << 8) +#define CPG_FRQCRC_ZFC_SHIFT 8 + +/* ----------------------------------------------------------------------------- + * Z Clock + * + * Traits of this clock: + * prepare - clk_prepare only ensures that parents are prepared + * enable - clk_enable only ensures that parents are enabled + * rate - rate is adjustable. clk->rate = parent->rate * mult / 32 + * parent - fixed parent. No clk_set_parent support + */ + +struct cpg_z_clk { + struct clk_hw hw; + void __iomem *reg; +}; + +#define to_z_clk(_hw) container_of(_hw, struct cpg_z_clk, hw) + +static unsigned long cpg_z_clk_recalc_rate(struct clk_hw *hw, + unsigned long parent_rate) +{ + struct cpg_z_clk *zclk = to_z_clk(hw); + unsigned int mult; + unsigned int val; + + val = (clk_readl(zclk->reg) & CPG_FRQCRC_ZFC_MASK) + >> CPG_FRQCRC_ZFC_SHIFT; + mult = 32 - val; + + return div_u64((u64)parent_rate * mult, 32); +} + +static long cpg_z_clk_round_rate(struct clk_hw *hw, unsigned long rate, + unsigned long *parent_rate) +{ + unsigned long prate = *parent_rate; + unsigned int mult; + + if (!prate) + prate = 1; + + mult = div_u64((u64)rate * 32, prate); + mult = clamp(mult, 1U, 32U); + + return *parent_rate / 32 * mult; +} + +static int cpg_z_clk_set_rate(struct clk_hw *hw, unsigned long rate, + unsigned long parent_rate) +{ + struct cpg_z_clk *zclk = to_z_clk(hw); + unsigned int mult; + u32 val; + + mult = div_u64((u64)rate * 32, parent_rate); + mult = clamp(mult, 1U, 32U); + + val = clk_readl(zclk->reg); + val &= ~CPG_FRQCRC_ZFC_MASK; + val |= (32 - mult) << CPG_FRQCRC_ZFC_SHIFT; + clk_writel(val, zclk->reg); + + return 0; +} + +static const struct clk_ops cpg_z_clk_ops = { + .recalc_rate = cpg_z_clk_recalc_rate, + .round_rate = cpg_z_clk_round_rate, + .set_rate = cpg_z_clk_set_rate, +}; + +static struct clk * __init cpg_z_clk_register(struct rcar_gen2_cpg *cpg) +{ + static const char *parent_name = "pll0"; + struct clk_init_data init; + struct cpg_z_clk *zclk; + struct clk *clk; + + zclk = kzalloc(sizeof(*zclk), GFP_KERNEL); + if (!zclk) + return ERR_PTR(-ENOMEM); + + init.name = "z"; + init.ops = &cpg_z_clk_ops; + init.flags = 0; + init.parent_names = &parent_name; + init.num_parents = 1; + + zclk->reg = cpg->reg + CPG_FRQCRC; + zclk->hw.init = &init; + + clk = clk_register(NULL, &zclk->hw); + if (IS_ERR(clk)) + kfree(zclk); + + return clk; +} + +/* ----------------------------------------------------------------------------- + * CPG Clock Data + */ + +/* + * MD EXTAL PLL0 PLL1 PLL3 + * 14 13 19 (MHz) *1 *1 + *--------------------------------------------------- + * 0 0 0 15 x 1 x172/2 x208/2 x106 + * 0 0 1 15 x 1 x172/2 x208/2 x88 + * 0 1 0 20 x 1 x130/2 x156/2 x80 + * 0 1 1 20 x 1 x130/2 x156/2 x66 + * 1 0 0 26 / 2 x200/2 x240/2 x122 + * 1 0 1 26 / 2 x200/2 x240/2 x102 + * 1 1 0 30 / 2 x172/2 x208/2 x106 + * 1 1 1 30 / 2 x172/2 x208/2 x88 + * + * *1 : Table 7.6 indicates VCO ouput (PLLx = VCO/2) + */ +#define CPG_PLL_CONFIG_INDEX(md) ((((md) & BIT(14)) >> 12) | \ + (((md) & BIT(13)) >> 12) | \ + (((md) & BIT(19)) >> 19)) +struct cpg_pll_config { + unsigned int extal_div; + unsigned int pll1_mult; + unsigned int pll3_mult; +}; + +static const struct cpg_pll_config cpg_pll_configs[8] __initconst = { + { 1, 208, 106 }, { 1, 208, 88 }, { 1, 156, 80 }, { 1, 156, 66 }, + { 2, 240, 122 }, { 2, 240, 102 }, { 2, 208, 106 }, { 2, 208, 88 }, +}; + +/* SDHI divisors */ +static const struct clk_div_table cpg_sdh_div_table[] = { + { 0, 2 }, { 1, 3 }, { 2, 4 }, { 3, 6 }, + { 4, 8 }, { 5, 12 }, { 6, 16 }, { 7, 18 }, + { 8, 24 }, { 10, 36 }, { 11, 48 }, { 0, 0 }, +}; + +static const struct clk_div_table cpg_sd01_div_table[] = { + { 5, 12 }, { 6, 16 }, { 7, 18 }, { 8, 24 }, + { 10, 36 }, { 11, 48 }, { 12, 10 }, { 0, 0 }, +}; + +/* ----------------------------------------------------------------------------- + * Initialization + */ + +static u32 cpg_mode __initdata; + +static struct clk * __init +rcar_gen2_cpg_register_clock(struct device_node *np, struct rcar_gen2_cpg *cpg, + const struct cpg_pll_config *config, + const char *name) +{ + const struct clk_div_table *table = NULL; + const char *parent_name = "main"; + unsigned int shift; + unsigned int mult = 1; + unsigned int div = 1; + + if (!strcmp(name, "main")) { + parent_name = of_clk_get_parent_name(np, 0); + div = config->extal_div; + } else if (!strcmp(name, "pll0")) { + /* PLL0 is a configurable multiplier clock. Register it as a + * fixed factor clock for now as there's no generic multiplier + * clock implementation and we currently have no need to change + * the multiplier value. + */ + u32 value = clk_readl(cpg->reg + CPG_PLL0CR); + mult = ((value >> 24) & ((1 << 7) - 1)) + 1; + } else if (!strcmp(name, "pll1")) { + mult = config->pll1_mult / 2; + } else if (!strcmp(name, "pll3")) { + mult = config->pll3_mult; + } else if (!strcmp(name, "lb")) { + div = cpg_mode & BIT(18) ? 36 : 24; + } else if (!strcmp(name, "qspi")) { + div = (cpg_mode & (BIT(3) | BIT(2) | BIT(1))) == BIT(2) + ? 16 : 20; + } else if (!strcmp(name, "sdh")) { + table = cpg_sdh_div_table; + shift = 8; + } else if (!strcmp(name, "sd0")) { + table = cpg_sd01_div_table; + shift = 4; + } else if (!strcmp(name, "sd1")) { + table = cpg_sd01_div_table; + shift = 0; + } else if (!strcmp(name, "z")) { + return cpg_z_clk_register(cpg); + } else { + return ERR_PTR(-EINVAL); + } + + if (!table) + return clk_register_fixed_factor(NULL, name, parent_name, 0, + mult, div); + else + return clk_register_divider_table(NULL, name, parent_name, 0, + cpg->reg + CPG_SDCKCR, shift, + 4, 0, table, &cpg->lock); +} + +static void __init rcar_gen2_cpg_clocks_init(struct device_node *np) +{ + const struct cpg_pll_config *config; + struct rcar_gen2_cpg *cpg; + struct clk **clks; + unsigned int i; + int num_clks; + + num_clks = of_property_count_strings(np, "clock-output-names"); + if (num_clks < 0) { + pr_err("%s: failed to count clocks\n", __func__); + return; + } + + cpg = kzalloc(sizeof(*cpg), GFP_KERNEL); + clks = kzalloc(num_clks * sizeof(*clks), GFP_KERNEL); + if (cpg == NULL || clks == NULL) { + /* We're leaking memory on purpose, there's no point in cleaning + * up as the system won't boot anyway. + */ + pr_err("%s: failed to allocate cpg\n", __func__); + return; + } + + spin_lock_init(&cpg->lock); + + cpg->data.clks = clks; + cpg->data.clk_num = num_clks; + + cpg->reg = of_iomap(np, 0); + if (WARN_ON(cpg->reg == NULL)) + return; + + config = &cpg_pll_configs[CPG_PLL_CONFIG_INDEX(cpg_mode)]; + + for (i = 0; i < num_clks; ++i) { + const char *name; + struct clk *clk; + + of_property_read_string_index(np, "clock-output-names", i, + &name); + + clk = rcar_gen2_cpg_register_clock(np, cpg, config, name); + if (IS_ERR(clk)) + pr_err("%s: failed to register %s %s clock (%ld)\n", + __func__, np->name, name, PTR_ERR(clk)); + else + cpg->data.clks[i] = clk; + } + + of_clk_add_provider(np, of_clk_src_onecell_get, &cpg->data); +} +CLK_OF_DECLARE(rcar_gen2_cpg_clks, "renesas,rcar-gen2-cpg-clocks", + rcar_gen2_cpg_clocks_init); + +void __init rcar_gen2_clocks_init(u32 mode) +{ + cpg_mode = mode; + + of_clk_init(NULL); +} diff --git a/drivers/clocksource/exynos_mct.c b/drivers/clocksource/exynos_mct.c index 62b0de6..48f76bc 100644 --- a/drivers/clocksource/exynos_mct.c +++ b/drivers/clocksource/exynos_mct.c @@ -71,6 +71,10 @@ enum { MCT_L1_IRQ, MCT_L2_IRQ, MCT_L3_IRQ, + MCT_L4_IRQ, + MCT_L5_IRQ, + MCT_L6_IRQ, + MCT_L7_IRQ, MCT_NR_IRQS, }; diff --git a/drivers/clocksource/nomadik-mtu.c b/drivers/clocksource/nomadik-mtu.c index 152a3f3..a709cfa 100644 --- a/drivers/clocksource/nomadik-mtu.c +++ b/drivers/clocksource/nomadik-mtu.c @@ -20,7 +20,6 @@ #include <linux/jiffies.h> #include <linux/delay.h> #include <linux/err.h> -#include <linux/platform_data/clocksource-nomadik-mtu.h> #include <linux/sched_clock.h> #include <asm/mach/time.h> @@ -103,7 +102,7 @@ static int nmdk_clkevt_next(unsigned long evt, struct clock_event_device *ev) return 0; } -void nmdk_clkevt_reset(void) +static void nmdk_clkevt_reset(void) { if (clkevt_periodic) { /* Timer: configure load and background-load, and fire it up */ @@ -144,7 +143,7 @@ static void nmdk_clkevt_mode(enum clock_event_mode mode, } } -void nmdk_clksrc_reset(void) +static void nmdk_clksrc_reset(void) { /* Disable */ writel(0, mtu_base + MTU_CR(0)); @@ -192,8 +191,8 @@ static struct irqaction nmdk_timer_irq = { .dev_id = &nmdk_clkevt, }; -static void __init __nmdk_timer_init(void __iomem *base, int irq, - struct clk *pclk, struct clk *clk) +static void __init nmdk_timer_init(void __iomem *base, int irq, + struct clk *pclk, struct clk *clk) { unsigned long rate; @@ -245,18 +244,6 @@ static void __init __nmdk_timer_init(void __iomem *base, int irq, register_current_timer_delay(&mtu_delay_timer); } -void __init nmdk_timer_init(void __iomem *base, int irq) -{ - struct clk *clk0, *pclk0; - - pclk0 = clk_get_sys("mtu0", "apb_pclk"); - BUG_ON(IS_ERR(pclk0)); - clk0 = clk_get_sys("mtu0", NULL); - BUG_ON(IS_ERR(clk0)); - - __nmdk_timer_init(base, irq, pclk0, clk0); -} - static void __init nmdk_timer_of_init(struct device_node *node) { struct clk *pclk; @@ -280,7 +267,7 @@ static void __init nmdk_timer_of_init(struct device_node *node) if (irq <= 0) panic("Can't parse IRQ"); - __nmdk_timer_init(base, irq, pclk, clk); + nmdk_timer_init(base, irq, pclk, clk); } CLOCKSOURCE_OF_DECLARE(nomadik_mtu, "st,nomadik-mtu", nmdk_timer_of_init); diff --git a/drivers/dma/ste_dma40.c b/drivers/dma/ste_dma40.c index b8c031b..00a2de9 100644 --- a/drivers/dma/ste_dma40.c +++ b/drivers/dma/ste_dma40.c @@ -2409,6 +2409,7 @@ static void d40_set_prio_realtime(struct d40_chan *d40c) #define D40_DT_FLAGS_DIR(flags) ((flags >> 1) & 0x1) #define D40_DT_FLAGS_BIG_ENDIAN(flags) ((flags >> 2) & 0x1) #define D40_DT_FLAGS_FIXED_CHAN(flags) ((flags >> 3) & 0x1) +#define D40_DT_FLAGS_HIGH_PRIO(flags) ((flags >> 4) & 0x1) static struct dma_chan *d40_xlate(struct of_phandle_args *dma_spec, struct of_dma *ofdma) @@ -2446,6 +2447,9 @@ static struct dma_chan *d40_xlate(struct of_phandle_args *dma_spec, cfg.use_fixed_channel = true; } + if (D40_DT_FLAGS_HIGH_PRIO(flags)) + cfg.high_priority = true; + return dma_request_channel(cap, stedma40_filter, &cfg); } diff --git a/drivers/pinctrl/pinctrl-nomadik.c b/drivers/pinctrl/pinctrl-nomadik.c index cd2b1a1..53a1111 100644 --- a/drivers/pinctrl/pinctrl-nomadik.c +++ b/drivers/pinctrl/pinctrl-nomadik.c @@ -4,7 +4,7 @@ * Copyright (C) 2008,2009 STMicroelectronics * Copyright (C) 2009 Alessandro Rubini <rubini@unipv.it> * Rewritten based on work by Prafulla WADASKAR <prafulla.wadaskar@st.com> - * Copyright (C) 2011 Linus Walleij <linus.walleij@linaro.org> + * Copyright (C) 2011-2013 Linus Walleij <linus.walleij@linaro.org> * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -33,7 +33,6 @@ #include <linux/pinctrl/pinconf.h> /* Since we request GPIOs from ourself */ #include <linux/pinctrl/consumer.h> -#include <linux/platform_data/pinctrl-nomadik.h> #include "pinctrl-nomadik.h" #include "core.h" @@ -45,6 +44,221 @@ * Symbols in this file are called "nmk_gpio" for "nomadik gpio" */ +/* + * pin configurations are represented by 32-bit integers: + * + * bit 0.. 8 - Pin Number (512 Pins Maximum) + * bit 9..10 - Alternate Function Selection + * bit 11..12 - Pull up/down state + * bit 13 - Sleep mode behaviour + * bit 14 - Direction + * bit 15 - Value (if output) + * bit 16..18 - SLPM pull up/down state + * bit 19..20 - SLPM direction + * bit 21..22 - SLPM Value (if output) + * bit 23..25 - PDIS value (if input) + * bit 26 - Gpio mode + * bit 27 - Sleep mode + * + * to facilitate the definition, the following macros are provided + * + * PIN_CFG_DEFAULT - default config (0): + * pull up/down = disabled + * sleep mode = input/wakeup + * direction = input + * value = low + * SLPM direction = same as normal + * SLPM pull = same as normal + * SLPM value = same as normal + * + * PIN_CFG - default config with alternate function + */ + +typedef unsigned long pin_cfg_t; + +#define PIN_NUM_MASK 0x1ff +#define PIN_NUM(x) ((x) & PIN_NUM_MASK) + +#define PIN_ALT_SHIFT 9 +#define PIN_ALT_MASK (0x3 << PIN_ALT_SHIFT) +#define PIN_ALT(x) (((x) & PIN_ALT_MASK) >> PIN_ALT_SHIFT) +#define PIN_GPIO (NMK_GPIO_ALT_GPIO << PIN_ALT_SHIFT) +#define PIN_ALT_A (NMK_GPIO_ALT_A << PIN_ALT_SHIFT) +#define PIN_ALT_B (NMK_GPIO_ALT_B << PIN_ALT_SHIFT) +#define PIN_ALT_C (NMK_GPIO_ALT_C << PIN_ALT_SHIFT) + +#define PIN_PULL_SHIFT 11 +#define PIN_PULL_MASK (0x3 << PIN_PULL_SHIFT) +#define PIN_PULL(x) (((x) & PIN_PULL_MASK) >> PIN_PULL_SHIFT) +#define PIN_PULL_NONE (NMK_GPIO_PULL_NONE << PIN_PULL_SHIFT) +#define PIN_PULL_UP (NMK_GPIO_PULL_UP << PIN_PULL_SHIFT) +#define PIN_PULL_DOWN (NMK_GPIO_PULL_DOWN << PIN_PULL_SHIFT) + +#define PIN_SLPM_SHIFT 13 +#define PIN_SLPM_MASK (0x1 << PIN_SLPM_SHIFT) +#define PIN_SLPM(x) (((x) & PIN_SLPM_MASK) >> PIN_SLPM_SHIFT) +#define PIN_SLPM_MAKE_INPUT (NMK_GPIO_SLPM_INPUT << PIN_SLPM_SHIFT) +#define PIN_SLPM_NOCHANGE (NMK_GPIO_SLPM_NOCHANGE << PIN_SLPM_SHIFT) +/* These two replace the above in DB8500v2+ */ +#define PIN_SLPM_WAKEUP_ENABLE (NMK_GPIO_SLPM_WAKEUP_ENABLE << PIN_SLPM_SHIFT) +#define PIN_SLPM_WAKEUP_DISABLE (NMK_GPIO_SLPM_WAKEUP_DISABLE << PIN_SLPM_SHIFT) +#define PIN_SLPM_USE_MUX_SETTINGS_IN_SLEEP PIN_SLPM_WAKEUP_DISABLE + +#define PIN_SLPM_GPIO PIN_SLPM_WAKEUP_ENABLE /* In SLPM, pin is a gpio */ +#define PIN_SLPM_ALTFUNC PIN_SLPM_WAKEUP_DISABLE /* In SLPM, pin is altfunc */ + +#define PIN_DIR_SHIFT 14 +#define PIN_DIR_MASK (0x1 << PIN_DIR_SHIFT) +#define PIN_DIR(x) (((x) & PIN_DIR_MASK) >> PIN_DIR_SHIFT) +#define PIN_DIR_INPUT (0 << PIN_DIR_SHIFT) +#define PIN_DIR_OUTPUT (1 << PIN_DIR_SHIFT) + +#define PIN_VAL_SHIFT 15 +#define PIN_VAL_MASK (0x1 << PIN_VAL_SHIFT) +#define PIN_VAL(x) (((x) & PIN_VAL_MASK) >> PIN_VAL_SHIFT) +#define PIN_VAL_LOW (0 << PIN_VAL_SHIFT) +#define PIN_VAL_HIGH (1 << PIN_VAL_SHIFT) + +#define PIN_SLPM_PULL_SHIFT 16 +#define PIN_SLPM_PULL_MASK (0x7 << PIN_SLPM_PULL_SHIFT) +#define PIN_SLPM_PULL(x) \ + (((x) & PIN_SLPM_PULL_MASK) >> PIN_SLPM_PULL_SHIFT) +#define PIN_SLPM_PULL_NONE \ + ((1 + NMK_GPIO_PULL_NONE) << PIN_SLPM_PULL_SHIFT) +#define PIN_SLPM_PULL_UP \ + ((1 + NMK_GPIO_PULL_UP) << PIN_SLPM_PULL_SHIFT) +#define PIN_SLPM_PULL_DOWN \ + ((1 + NMK_GPIO_PULL_DOWN) << PIN_SLPM_PULL_SHIFT) + +#define PIN_SLPM_DIR_SHIFT 19 +#define PIN_SLPM_DIR_MASK (0x3 << PIN_SLPM_DIR_SHIFT) +#define PIN_SLPM_DIR(x) \ + (((x) & PIN_SLPM_DIR_MASK) >> PIN_SLPM_DIR_SHIFT) +#define PIN_SLPM_DIR_INPUT ((1 + 0) << PIN_SLPM_DIR_SHIFT) +#define PIN_SLPM_DIR_OUTPUT ((1 + 1) << PIN_SLPM_DIR_SHIFT) + +#define PIN_SLPM_VAL_SHIFT 21 +#define PIN_SLPM_VAL_MASK (0x3 << PIN_SLPM_VAL_SHIFT) +#define PIN_SLPM_VAL(x) \ + (((x) & PIN_SLPM_VAL_MASK) >> PIN_SLPM_VAL_SHIFT) +#define PIN_SLPM_VAL_LOW ((1 + 0) << PIN_SLPM_VAL_SHIFT) +#define PIN_SLPM_VAL_HIGH ((1 + 1) << PIN_SLPM_VAL_SHIFT) + +#define PIN_SLPM_PDIS_SHIFT 23 +#define PIN_SLPM_PDIS_MASK (0x3 << PIN_SLPM_PDIS_SHIFT) +#define PIN_SLPM_PDIS(x) \ + (((x) & PIN_SLPM_PDIS_MASK) >> PIN_SLPM_PDIS_SHIFT) +#define PIN_SLPM_PDIS_NO_CHANGE (0 << PIN_SLPM_PDIS_SHIFT) +#define PIN_SLPM_PDIS_DISABLED (1 << PIN_SLPM_PDIS_SHIFT) +#define PIN_SLPM_PDIS_ENABLED (2 << PIN_SLPM_PDIS_SHIFT) + +#define PIN_LOWEMI_SHIFT 25 +#define PIN_LOWEMI_MASK (0x1 << PIN_LOWEMI_SHIFT) +#define PIN_LOWEMI(x) (((x) & PIN_LOWEMI_MASK) >> PIN_LOWEMI_SHIFT) +#define PIN_LOWEMI_DISABLED (0 << PIN_LOWEMI_SHIFT) +#define PIN_LOWEMI_ENABLED (1 << PIN_LOWEMI_SHIFT) + +#define PIN_GPIOMODE_SHIFT 26 +#define PIN_GPIOMODE_MASK (0x1 << PIN_GPIOMODE_SHIFT) +#define PIN_GPIOMODE(x) (((x) & PIN_GPIOMODE_MASK) >> PIN_GPIOMODE_SHIFT) +#define PIN_GPIOMODE_DISABLED (0 << PIN_GPIOMODE_SHIFT) +#define PIN_GPIOMODE_ENABLED (1 << PIN_GPIOMODE_SHIFT) + +#define PIN_SLEEPMODE_SHIFT 27 +#define PIN_SLEEPMODE_MASK (0x1 << PIN_SLEEPMODE_SHIFT) +#define PIN_SLEEPMODE(x) (((x) & PIN_SLEEPMODE_MASK) >> PIN_SLEEPMODE_SHIFT) +#define PIN_SLEEPMODE_DISABLED (0 << PIN_SLEEPMODE_SHIFT) +#define PIN_SLEEPMODE_ENABLED (1 << PIN_SLEEPMODE_SHIFT) + + +/* Shortcuts. Use these instead of separate DIR, PULL, and VAL. */ +#define PIN_INPUT_PULLDOWN (PIN_DIR_INPUT | PIN_PULL_DOWN) +#define PIN_INPUT_PULLUP (PIN_DIR_INPUT | PIN_PULL_UP) +#define PIN_INPUT_NOPULL (PIN_DIR_INPUT | PIN_PULL_NONE) +#define PIN_OUTPUT_LOW (PIN_DIR_OUTPUT | PIN_VAL_LOW) +#define PIN_OUTPUT_HIGH (PIN_DIR_OUTPUT | PIN_VAL_HIGH) + +#define PIN_SLPM_INPUT_PULLDOWN (PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_DOWN) +#define PIN_SLPM_INPUT_PULLUP (PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_UP) +#define PIN_SLPM_INPUT_NOPULL (PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_NONE) +#define PIN_SLPM_OUTPUT_LOW (PIN_SLPM_DIR_OUTPUT | PIN_SLPM_VAL_LOW) +#define PIN_SLPM_OUTPUT_HIGH (PIN_SLPM_DIR_OUTPUT | PIN_SLPM_VAL_HIGH) + +#define PIN_CFG_DEFAULT (0) + +#define PIN_CFG(num, alt) \ + (PIN_CFG_DEFAULT |\ + (PIN_NUM(num) | PIN_##alt)) + +#define PIN_CFG_INPUT(num, alt, pull) \ + (PIN_CFG_DEFAULT |\ + (PIN_NUM(num) | PIN_##alt | PIN_INPUT_##pull)) + +#define PIN_CFG_OUTPUT(num, alt, val) \ + (PIN_CFG_DEFAULT |\ + (PIN_NUM(num) | PIN_##alt | PIN_OUTPUT_##val)) + +/* + * "nmk_gpio" and "NMK_GPIO" stand for "Nomadik GPIO", leaving + * the "gpio" namespace for generic and cross-machine functions + */ + +#define GPIO_BLOCK_SHIFT 5 +#define NMK_GPIO_PER_CHIP (1 << GPIO_BLOCK_SHIFT) + +/* Register in the logic block */ +#define NMK_GPIO_DAT 0x00 +#define NMK_GPIO_DATS 0x04 +#define NMK_GPIO_DATC 0x08 +#define NMK_GPIO_PDIS 0x0c +#define NMK_GPIO_DIR 0x10 +#define NMK_GPIO_DIRS 0x14 +#define NMK_GPIO_DIRC 0x18 +#define NMK_GPIO_SLPC 0x1c +#define NMK_GPIO_AFSLA 0x20 +#define NMK_GPIO_AFSLB 0x24 +#define NMK_GPIO_LOWEMI 0x28 + +#define NMK_GPIO_RIMSC 0x40 +#define NMK_GPIO_FIMSC 0x44 +#define NMK_GPIO_IS 0x48 +#define NMK_GPIO_IC 0x4c +#define NMK_GPIO_RWIMSC 0x50 +#define NMK_GPIO_FWIMSC 0x54 +#define NMK_GPIO_WKS 0x58 +/* These appear in DB8540 and later ASICs */ +#define NMK_GPIO_EDGELEVEL 0x5C +#define NMK_GPIO_LEVEL 0x60 + + +/* Pull up/down values */ +enum nmk_gpio_pull { + NMK_GPIO_PULL_NONE, + NMK_GPIO_PULL_UP, + NMK_GPIO_PULL_DOWN, +}; + +/* Sleep mode */ +enum nmk_gpio_slpm { + NMK_GPIO_SLPM_INPUT, + NMK_GPIO_SLPM_WAKEUP_ENABLE = NMK_GPIO_SLPM_INPUT, + NMK_GPIO_SLPM_NOCHANGE, + NMK_GPIO_SLPM_WAKEUP_DISABLE = NMK_GPIO_SLPM_NOCHANGE, +}; + +/* + * Platform data to register a block: only the initial gpio/irq number. + */ +struct nmk_gpio_platform_data { + char *name; + int first_gpio; + int first_irq; + int num_gpio; + u32 (*get_secondary_status)(unsigned int bank); + void (*set_ioforce)(bool enable); + bool supports_sleepmode; +}; + struct nmk_gpio_chip { struct gpio_chip chip; struct irq_domain *domain; @@ -1026,7 +1240,7 @@ static const struct irq_domain_ops nmk_gpio_irq_simple_ops = { static int nmk_gpio_probe(struct platform_device *dev) { - struct nmk_gpio_platform_data *pdata = dev->dev.platform_data; + struct nmk_gpio_platform_data *pdata; struct device_node *np = dev->dev.of_node; struct nmk_gpio_chip *nmk_chip; struct gpio_chip *chip; @@ -1034,32 +1248,24 @@ static int nmk_gpio_probe(struct platform_device *dev) struct clk *clk; int secondary_irq; void __iomem *base; - int irq_start = 0; int irq; int ret; - if (!pdata && !np) { - dev_err(&dev->dev, "No platform data or device tree found\n"); - return -ENODEV; - } - - if (np) { - pdata = devm_kzalloc(&dev->dev, sizeof(*pdata), GFP_KERNEL); - if (!pdata) - return -ENOMEM; - - if (of_get_property(np, "st,supports-sleepmode", NULL)) - pdata->supports_sleepmode = true; + pdata = devm_kzalloc(&dev->dev, sizeof(*pdata), GFP_KERNEL); + if (!pdata) + return -ENOMEM; - if (of_property_read_u32(np, "gpio-bank", &dev->id)) { - dev_err(&dev->dev, "gpio-bank property not found\n"); - return -EINVAL; - } + if (of_get_property(np, "st,supports-sleepmode", NULL)) + pdata->supports_sleepmode = true; - pdata->first_gpio = dev->id * NMK_GPIO_PER_CHIP; - pdata->num_gpio = NMK_GPIO_PER_CHIP; + if (of_property_read_u32(np, "gpio-bank", &dev->id)) { + dev_err(&dev->dev, "gpio-bank property not found\n"); + return -EINVAL; } + pdata->first_gpio = dev->id * NMK_GPIO_PER_CHIP; + pdata->num_gpio = NMK_GPIO_PER_CHIP; + irq = platform_get_irq(dev, 0); if (irq < 0) return irq; @@ -1107,10 +1313,7 @@ static int nmk_gpio_probe(struct platform_device *dev) clk_enable(nmk_chip->clk); nmk_chip->lowemi = readl_relaxed(nmk_chip->addr + NMK_GPIO_LOWEMI); clk_disable(nmk_chip->clk); - -#ifdef CONFIG_OF_GPIO chip->of_node = np; -#endif ret = gpiochip_add(&nmk_chip->chip); if (ret) @@ -1122,10 +1325,8 @@ static int nmk_gpio_probe(struct platform_device *dev) platform_set_drvdata(dev, nmk_chip); - if (!np) - irq_start = pdata->first_irq; nmk_chip->domain = irq_domain_add_simple(np, - NMK_GPIO_PER_CHIP, irq_start, + NMK_GPIO_PER_CHIP, 0, &nmk_gpio_irq_simple_ops, nmk_chip); if (!nmk_chip->domain) { dev_err(&dev->dev, "failed to create irqdomain\n"); @@ -1858,11 +2059,10 @@ static int nmk_pinctrl_resume(struct platform_device *pdev) static int nmk_pinctrl_probe(struct platform_device *pdev) { - const struct platform_device_id *platid = platform_get_device_id(pdev); + const struct of_device_id *match; struct device_node *np = pdev->dev.of_node; struct device_node *prcm_np; struct nmk_pinctrl *npct; - struct resource *res; unsigned int version = 0; int i; @@ -1870,16 +2070,10 @@ static int nmk_pinctrl_probe(struct platform_device *pdev) if (!npct) return -ENOMEM; - if (platid) - version = platid->driver_data; - else if (np) { - const struct of_device_id *match; - - match = of_match_device(nmk_pinctrl_match, &pdev->dev); - if (!match) - return -ENODEV; - version = (unsigned int) match->data; - } + match = of_match_device(nmk_pinctrl_match, &pdev->dev); + if (!match) + return -ENODEV; + version = (unsigned int) match->data; /* Poke in other ASIC variants here */ if (version == PINCTRL_NMK_STN8815) @@ -1889,17 +2083,9 @@ static int nmk_pinctrl_probe(struct platform_device *pdev) if (version == PINCTRL_NMK_DB8540) nmk_pinctrl_db8540_init(&npct->soc); - if (np) { - prcm_np = of_parse_phandle(np, "prcm", 0); - if (prcm_np) - npct->prcm_base = of_iomap(prcm_np, 0); - } - - /* Allow platform passed information to over-write DT. */ - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (res) - npct->prcm_base = devm_ioremap(&pdev->dev, res->start, - resource_size(res)); + prcm_np = of_parse_phandle(np, "prcm", 0); + if (prcm_np) + npct->prcm_base = of_iomap(prcm_np, 0); if (!npct->prcm_base) { if (version == PINCTRL_NMK_STN8815) { dev_info(&pdev->dev, @@ -1958,13 +2144,6 @@ static struct platform_driver nmk_gpio_driver = { .probe = nmk_gpio_probe, }; -static const struct platform_device_id nmk_pinctrl_id[] = { - { "pinctrl-stn8815", PINCTRL_NMK_STN8815 }, - { "pinctrl-db8500", PINCTRL_NMK_DB8500 }, - { "pinctrl-db8540", PINCTRL_NMK_DB8540 }, - { } -}; - static struct platform_driver nmk_pinctrl_driver = { .driver = { .owner = THIS_MODULE, @@ -1972,7 +2151,6 @@ static struct platform_driver nmk_pinctrl_driver = { .of_match_table = nmk_pinctrl_match, }, .probe = nmk_pinctrl_probe, - .id_table = nmk_pinctrl_id, #ifdef CONFIG_PM .suspend = nmk_pinctrl_suspend, .resume = nmk_pinctrl_resume, diff --git a/drivers/pinctrl/pinctrl-nomadik.h b/drivers/pinctrl/pinctrl-nomadik.h index bcd4191..d8215f1 100644 --- a/drivers/pinctrl/pinctrl-nomadik.h +++ b/drivers/pinctrl/pinctrl-nomadik.h @@ -1,13 +1,23 @@ #ifndef PINCTRL_PINCTRL_NOMADIK_H #define PINCTRL_PINCTRL_NOMADIK_H -#include <linux/platform_data/pinctrl-nomadik.h> - /* Package definitions */ #define PINCTRL_NMK_STN8815 0 #define PINCTRL_NMK_DB8500 1 #define PINCTRL_NMK_DB8540 2 +/* Alternate functions: function C is set in hw by setting both A and B */ +#define NMK_GPIO_ALT_GPIO 0 +#define NMK_GPIO_ALT_A 1 +#define NMK_GPIO_ALT_B 2 +#define NMK_GPIO_ALT_C (NMK_GPIO_ALT_A | NMK_GPIO_ALT_B) + +#define NMK_GPIO_ALT_CX_SHIFT 2 +#define NMK_GPIO_ALT_C1 ((1<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C) +#define NMK_GPIO_ALT_C2 ((2<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C) +#define NMK_GPIO_ALT_C3 ((3<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C) +#define NMK_GPIO_ALT_C4 ((4<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C) + #define PRCM_GPIOCR_ALTCX(pin_num,\ altc1_used, altc1_ri, altc1_cb,\ altc2_used, altc2_ri, altc2_cb,\ diff --git a/include/dt-bindings/clock/r8a7790-clock.h b/include/dt-bindings/clock/r8a7790-clock.h index 420f0b0..859e9be 100644 --- a/include/dt-bindings/clock/r8a7790-clock.h +++ b/include/dt-bindings/clock/r8a7790-clock.h @@ -22,6 +22,9 @@ #define R8A7790_CLK_SD1 8 #define R8A7790_CLK_Z 9 +/* MSTP0 */ +#define R8A7790_CLK_MSIOF0 0 + /* MSTP1 */ #define R8A7790_CLK_TMU1 11 #define R8A7790_CLK_TMU3 21 @@ -37,8 +40,11 @@ #define R8A7790_CLK_SCIFA2 2 #define R8A7790_CLK_SCIFA1 3 #define R8A7790_CLK_SCIFA0 4 +#define R8A7790_CLK_MSIOF2 5 #define R8A7790_CLK_SCIFB0 6 #define R8A7790_CLK_SCIFB1 7 +#define R8A7790_CLK_MSIOF1 8 +#define R8A7790_CLK_MSIOF3 15 #define R8A7790_CLK_SCIFB2 16 #define R8A7790_CLK_SYS_DMAC0 18 #define R8A7790_CLK_SYS_DMAC1 19 @@ -91,6 +97,7 @@ #define R8A7790_CLK_GPIO0 12 #define R8A7790_CLK_RCAN1 15 #define R8A7790_CLK_RCAN0 16 +#define R8A7790_CLK_QSPI_MOD 17 #define R8A7790_CLK_IICDVFS 26 #define R8A7790_CLK_I2C3 28 #define R8A7790_CLK_I2C2 29 diff --git a/include/dt-bindings/clock/r8a7791-clock.h b/include/dt-bindings/clock/r8a7791-clock.h index df1715b..30f82f2 100644 --- a/include/dt-bindings/clock/r8a7791-clock.h +++ b/include/dt-bindings/clock/r8a7791-clock.h @@ -21,6 +21,9 @@ #define R8A7791_CLK_SD0 7 #define R8A7791_CLK_Z 8 +/* MSTP0 */ +#define R8A7791_CLK_MSIOF0 0 + /* MSTP1 */ #define R8A7791_CLK_TMU1 11 #define R8A7791_CLK_TMU3 21 @@ -35,8 +38,10 @@ #define R8A7791_CLK_SCIFA2 2 #define R8A7791_CLK_SCIFA1 3 #define R8A7791_CLK_SCIFA0 4 +#define R8A7791_CLK_MSIOF2 5 #define R8A7791_CLK_SCIFB0 6 #define R8A7791_CLK_SCIFB1 7 +#define R8A7791_CLK_MSIOF1 8 #define R8A7791_CLK_SCIFB2 16 #define R8A7791_CLK_DMAC 18 @@ -89,6 +94,7 @@ #define R8A7791_CLK_GPIO0 12 #define R8A7791_CLK_RCAN1 15 #define R8A7791_CLK_RCAN0 16 +#define R8A7791_CLK_QSPI_MOD 17 #define R8A7791_CLK_I2C5 25 #define R8A7791_CLK_IICDVFS 26 #define R8A7791_CLK_I2C4 27 diff --git a/include/dt-bindings/gpio/tegra-gpio.h b/include/dt-bindings/gpio/tegra-gpio.h index 4d179c0..197dc28 100644 --- a/include/dt-bindings/gpio/tegra-gpio.h +++ b/include/dt-bindings/gpio/tegra-gpio.h @@ -43,6 +43,7 @@ #define TEGRA_GPIO_BANK_ID_CC 28 #define TEGRA_GPIO_BANK_ID_DD 29 #define TEGRA_GPIO_BANK_ID_EE 30 +#define TEGRA_GPIO_BANK_ID_FF 31 #define TEGRA_GPIO(bank, offset) \ ((TEGRA_GPIO_BANK_ID_##bank * 8) + offset) diff --git a/include/dt-bindings/pinctrl/pinctrl-tegra.h b/include/dt-bindings/pinctrl/pinctrl-tegra.h new file mode 100644 index 0000000..ebafa49 --- /dev/null +++ b/include/dt-bindings/pinctrl/pinctrl-tegra.h @@ -0,0 +1,45 @@ +/* + * This header provides constants for Tegra pinctrl bindings. + * + * Copyright (c) 2013, NVIDIA CORPORATION. All rights reserved. + * + * Author: Laxman Dewangan <ldewangan@nvidia.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms and conditions of the GNU General Public License, + * version 2, as published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for + * more details. + */ + +#ifndef _DT_BINDINGS_PINCTRL_TEGRA_H +#define _DT_BINDINGS_PINCTRL_TEGRA_H + +/* + * Enable/disable for diffeent dt properties. This is applicable for + * properties nvidia,enable-input, nvidia,tristate, nvidia,open-drain, + * nvidia,lock, nvidia,rcv-sel, nvidia,high-speed-mode, nvidia,schmitt. + */ +#define TEGRA_PIN_DISABLE 0 +#define TEGRA_PIN_ENABLE 1 + +#define TEGRA_PIN_PULL_NONE 0 +#define TEGRA_PIN_PULL_DOWN 1 +#define TEGRA_PIN_PULL_UP 2 + +/* Low power mode driver */ +#define TEGRA_PIN_LP_DRIVE_DIV_8 0 +#define TEGRA_PIN_LP_DRIVE_DIV_4 1 +#define TEGRA_PIN_LP_DRIVE_DIV_2 2 +#define TEGRA_PIN_LP_DRIVE_DIV_1 3 + +/* Rising/Falling slew rate */ +#define TEGRA_PIN_SLEW_RATE_FASTEST 0 +#define TEGRA_PIN_SLEW_RATE_FAST 1 +#define TEGRA_PIN_SLEW_RATE_SLOW 2 +#define TEGRA_PIN_SLEW_RATE_SLOWEST 3 + +#endif diff --git a/include/linux/clk/shmobile.h b/include/linux/clk/shmobile.h new file mode 100644 index 0000000..f9bf080 --- /dev/null +++ b/include/linux/clk/shmobile.h @@ -0,0 +1,19 @@ +/* + * Copyright 2013 Ideas On Board SPRL + * + * Contact: Laurent Pinchart <laurent.pinchart@ideasonboard.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +#ifndef __LINUX_CLK_SHMOBILE_H_ +#define __LINUX_CLK_SHMOBILE_H_ + +#include <linux/types.h> + +void rcar_gen2_clocks_init(u32 mode); + +#endif diff --git a/include/linux/platform_data/clocksource-nomadik-mtu.h b/include/linux/platform_data/clocksource-nomadik-mtu.h deleted file mode 100644 index 8008897..0000000 --- a/include/linux/platform_data/clocksource-nomadik-mtu.h +++ /dev/null @@ -1,9 +0,0 @@ -#ifndef __PLAT_MTU_H -#define __PLAT_MTU_H - -void nmdk_timer_init(void __iomem *base, int irq); -void nmdk_clkevt_reset(void); -void nmdk_clksrc_reset(void); - -#endif /* __PLAT_MTU_H */ - diff --git a/include/linux/platform_data/pinctrl-nomadik.h b/include/linux/platform_data/pinctrl-nomadik.h deleted file mode 100644 index abf5bed..0000000 --- a/include/linux/platform_data/pinctrl-nomadik.h +++ /dev/null @@ -1,242 +0,0 @@ -/* - * Structures and registers for GPIO access in the Nomadik SoC - * - * Copyright (C) 2008 STMicroelectronics - * Author: Prafulla WADASKAR <prafulla.wadaskar@st.com> - * Copyright (C) 2009 Alessandro Rubini <rubini@unipv.it> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#ifndef __PLAT_NOMADIK_GPIO -#define __PLAT_NOMADIK_GPIO - -/* - * pin configurations are represented by 32-bit integers: - * - * bit 0.. 8 - Pin Number (512 Pins Maximum) - * bit 9..10 - Alternate Function Selection - * bit 11..12 - Pull up/down state - * bit 13 - Sleep mode behaviour - * bit 14 - Direction - * bit 15 - Value (if output) - * bit 16..18 - SLPM pull up/down state - * bit 19..20 - SLPM direction - * bit 21..22 - SLPM Value (if output) - * bit 23..25 - PDIS value (if input) - * bit 26 - Gpio mode - * bit 27 - Sleep mode - * - * to facilitate the definition, the following macros are provided - * - * PIN_CFG_DEFAULT - default config (0): - * pull up/down = disabled - * sleep mode = input/wakeup - * direction = input - * value = low - * SLPM direction = same as normal - * SLPM pull = same as normal - * SLPM value = same as normal - * - * PIN_CFG - default config with alternate function - */ - -typedef unsigned long pin_cfg_t; - -#define PIN_NUM_MASK 0x1ff -#define PIN_NUM(x) ((x) & PIN_NUM_MASK) - -#define PIN_ALT_SHIFT 9 -#define PIN_ALT_MASK (0x3 << PIN_ALT_SHIFT) -#define PIN_ALT(x) (((x) & PIN_ALT_MASK) >> PIN_ALT_SHIFT) -#define PIN_GPIO (NMK_GPIO_ALT_GPIO << PIN_ALT_SHIFT) -#define PIN_ALT_A (NMK_GPIO_ALT_A << PIN_ALT_SHIFT) -#define PIN_ALT_B (NMK_GPIO_ALT_B << PIN_ALT_SHIFT) -#define PIN_ALT_C (NMK_GPIO_ALT_C << PIN_ALT_SHIFT) - -#define PIN_PULL_SHIFT 11 -#define PIN_PULL_MASK (0x3 << PIN_PULL_SHIFT) -#define PIN_PULL(x) (((x) & PIN_PULL_MASK) >> PIN_PULL_SHIFT) -#define PIN_PULL_NONE (NMK_GPIO_PULL_NONE << PIN_PULL_SHIFT) -#define PIN_PULL_UP (NMK_GPIO_PULL_UP << PIN_PULL_SHIFT) -#define PIN_PULL_DOWN (NMK_GPIO_PULL_DOWN << PIN_PULL_SHIFT) - -#define PIN_SLPM_SHIFT 13 -#define PIN_SLPM_MASK (0x1 << PIN_SLPM_SHIFT) -#define PIN_SLPM(x) (((x) & PIN_SLPM_MASK) >> PIN_SLPM_SHIFT) -#define PIN_SLPM_MAKE_INPUT (NMK_GPIO_SLPM_INPUT << PIN_SLPM_SHIFT) -#define PIN_SLPM_NOCHANGE (NMK_GPIO_SLPM_NOCHANGE << PIN_SLPM_SHIFT) -/* These two replace the above in DB8500v2+ */ -#define PIN_SLPM_WAKEUP_ENABLE (NMK_GPIO_SLPM_WAKEUP_ENABLE << PIN_SLPM_SHIFT) -#define PIN_SLPM_WAKEUP_DISABLE (NMK_GPIO_SLPM_WAKEUP_DISABLE << PIN_SLPM_SHIFT) -#define PIN_SLPM_USE_MUX_SETTINGS_IN_SLEEP PIN_SLPM_WAKEUP_DISABLE - -#define PIN_SLPM_GPIO PIN_SLPM_WAKEUP_ENABLE /* In SLPM, pin is a gpio */ -#define PIN_SLPM_ALTFUNC PIN_SLPM_WAKEUP_DISABLE /* In SLPM, pin is altfunc */ - -#define PIN_DIR_SHIFT 14 -#define PIN_DIR_MASK (0x1 << PIN_DIR_SHIFT) -#define PIN_DIR(x) (((x) & PIN_DIR_MASK) >> PIN_DIR_SHIFT) -#define PIN_DIR_INPUT (0 << PIN_DIR_SHIFT) -#define PIN_DIR_OUTPUT (1 << PIN_DIR_SHIFT) - -#define PIN_VAL_SHIFT 15 -#define PIN_VAL_MASK (0x1 << PIN_VAL_SHIFT) -#define PIN_VAL(x) (((x) & PIN_VAL_MASK) >> PIN_VAL_SHIFT) -#define PIN_VAL_LOW (0 << PIN_VAL_SHIFT) -#define PIN_VAL_HIGH (1 << PIN_VAL_SHIFT) - -#define PIN_SLPM_PULL_SHIFT 16 -#define PIN_SLPM_PULL_MASK (0x7 << PIN_SLPM_PULL_SHIFT) -#define PIN_SLPM_PULL(x) \ - (((x) & PIN_SLPM_PULL_MASK) >> PIN_SLPM_PULL_SHIFT) -#define PIN_SLPM_PULL_NONE \ - ((1 + NMK_GPIO_PULL_NONE) << PIN_SLPM_PULL_SHIFT) -#define PIN_SLPM_PULL_UP \ - ((1 + NMK_GPIO_PULL_UP) << PIN_SLPM_PULL_SHIFT) -#define PIN_SLPM_PULL_DOWN \ - ((1 + NMK_GPIO_PULL_DOWN) << PIN_SLPM_PULL_SHIFT) - -#define PIN_SLPM_DIR_SHIFT 19 -#define PIN_SLPM_DIR_MASK (0x3 << PIN_SLPM_DIR_SHIFT) -#define PIN_SLPM_DIR(x) \ - (((x) & PIN_SLPM_DIR_MASK) >> PIN_SLPM_DIR_SHIFT) -#define PIN_SLPM_DIR_INPUT ((1 + 0) << PIN_SLPM_DIR_SHIFT) -#define PIN_SLPM_DIR_OUTPUT ((1 + 1) << PIN_SLPM_DIR_SHIFT) - -#define PIN_SLPM_VAL_SHIFT 21 -#define PIN_SLPM_VAL_MASK (0x3 << PIN_SLPM_VAL_SHIFT) -#define PIN_SLPM_VAL(x) \ - (((x) & PIN_SLPM_VAL_MASK) >> PIN_SLPM_VAL_SHIFT) -#define PIN_SLPM_VAL_LOW ((1 + 0) << PIN_SLPM_VAL_SHIFT) -#define PIN_SLPM_VAL_HIGH ((1 + 1) << PIN_SLPM_VAL_SHIFT) - -#define PIN_SLPM_PDIS_SHIFT 23 -#define PIN_SLPM_PDIS_MASK (0x3 << PIN_SLPM_PDIS_SHIFT) -#define PIN_SLPM_PDIS(x) \ - (((x) & PIN_SLPM_PDIS_MASK) >> PIN_SLPM_PDIS_SHIFT) -#define PIN_SLPM_PDIS_NO_CHANGE (0 << PIN_SLPM_PDIS_SHIFT) -#define PIN_SLPM_PDIS_DISABLED (1 << PIN_SLPM_PDIS_SHIFT) -#define PIN_SLPM_PDIS_ENABLED (2 << PIN_SLPM_PDIS_SHIFT) - -#define PIN_LOWEMI_SHIFT 25 -#define PIN_LOWEMI_MASK (0x1 << PIN_LOWEMI_SHIFT) -#define PIN_LOWEMI(x) (((x) & PIN_LOWEMI_MASK) >> PIN_LOWEMI_SHIFT) -#define PIN_LOWEMI_DISABLED (0 << PIN_LOWEMI_SHIFT) -#define PIN_LOWEMI_ENABLED (1 << PIN_LOWEMI_SHIFT) - -#define PIN_GPIOMODE_SHIFT 26 -#define PIN_GPIOMODE_MASK (0x1 << PIN_GPIOMODE_SHIFT) -#define PIN_GPIOMODE(x) (((x) & PIN_GPIOMODE_MASK) >> PIN_GPIOMODE_SHIFT) -#define PIN_GPIOMODE_DISABLED (0 << PIN_GPIOMODE_SHIFT) -#define PIN_GPIOMODE_ENABLED (1 << PIN_GPIOMODE_SHIFT) - -#define PIN_SLEEPMODE_SHIFT 27 -#define PIN_SLEEPMODE_MASK (0x1 << PIN_SLEEPMODE_SHIFT) -#define PIN_SLEEPMODE(x) (((x) & PIN_SLEEPMODE_MASK) >> PIN_SLEEPMODE_SHIFT) -#define PIN_SLEEPMODE_DISABLED (0 << PIN_SLEEPMODE_SHIFT) -#define PIN_SLEEPMODE_ENABLED (1 << PIN_SLEEPMODE_SHIFT) - - -/* Shortcuts. Use these instead of separate DIR, PULL, and VAL. */ -#define PIN_INPUT_PULLDOWN (PIN_DIR_INPUT | PIN_PULL_DOWN) -#define PIN_INPUT_PULLUP (PIN_DIR_INPUT | PIN_PULL_UP) -#define PIN_INPUT_NOPULL (PIN_DIR_INPUT | PIN_PULL_NONE) -#define PIN_OUTPUT_LOW (PIN_DIR_OUTPUT | PIN_VAL_LOW) -#define PIN_OUTPUT_HIGH (PIN_DIR_OUTPUT | PIN_VAL_HIGH) - -#define PIN_SLPM_INPUT_PULLDOWN (PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_DOWN) -#define PIN_SLPM_INPUT_PULLUP (PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_UP) -#define PIN_SLPM_INPUT_NOPULL (PIN_SLPM_DIR_INPUT | PIN_SLPM_PULL_NONE) -#define PIN_SLPM_OUTPUT_LOW (PIN_SLPM_DIR_OUTPUT | PIN_SLPM_VAL_LOW) -#define PIN_SLPM_OUTPUT_HIGH (PIN_SLPM_DIR_OUTPUT | PIN_SLPM_VAL_HIGH) - -#define PIN_CFG_DEFAULT (0) - -#define PIN_CFG(num, alt) \ - (PIN_CFG_DEFAULT |\ - (PIN_NUM(num) | PIN_##alt)) - -#define PIN_CFG_INPUT(num, alt, pull) \ - (PIN_CFG_DEFAULT |\ - (PIN_NUM(num) | PIN_##alt | PIN_INPUT_##pull)) - -#define PIN_CFG_OUTPUT(num, alt, val) \ - (PIN_CFG_DEFAULT |\ - (PIN_NUM(num) | PIN_##alt | PIN_OUTPUT_##val)) - -/* - * "nmk_gpio" and "NMK_GPIO" stand for "Nomadik GPIO", leaving - * the "gpio" namespace for generic and cross-machine functions - */ - -#define GPIO_BLOCK_SHIFT 5 -#define NMK_GPIO_PER_CHIP (1 << GPIO_BLOCK_SHIFT) - -/* Register in the logic block */ -#define NMK_GPIO_DAT 0x00 -#define NMK_GPIO_DATS 0x04 -#define NMK_GPIO_DATC 0x08 -#define NMK_GPIO_PDIS 0x0c -#define NMK_GPIO_DIR 0x10 -#define NMK_GPIO_DIRS 0x14 -#define NMK_GPIO_DIRC 0x18 -#define NMK_GPIO_SLPC 0x1c -#define NMK_GPIO_AFSLA 0x20 -#define NMK_GPIO_AFSLB 0x24 -#define NMK_GPIO_LOWEMI 0x28 - -#define NMK_GPIO_RIMSC 0x40 -#define NMK_GPIO_FIMSC 0x44 -#define NMK_GPIO_IS 0x48 -#define NMK_GPIO_IC 0x4c -#define NMK_GPIO_RWIMSC 0x50 -#define NMK_GPIO_FWIMSC 0x54 -#define NMK_GPIO_WKS 0x58 -/* These appear in DB8540 and later ASICs */ -#define NMK_GPIO_EDGELEVEL 0x5C -#define NMK_GPIO_LEVEL 0x60 - -/* Alternate functions: function C is set in hw by setting both A and B */ -#define NMK_GPIO_ALT_GPIO 0 -#define NMK_GPIO_ALT_A 1 -#define NMK_GPIO_ALT_B 2 -#define NMK_GPIO_ALT_C (NMK_GPIO_ALT_A | NMK_GPIO_ALT_B) - -#define NMK_GPIO_ALT_CX_SHIFT 2 -#define NMK_GPIO_ALT_C1 ((1<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C) -#define NMK_GPIO_ALT_C2 ((2<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C) -#define NMK_GPIO_ALT_C3 ((3<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C) -#define NMK_GPIO_ALT_C4 ((4<<NMK_GPIO_ALT_CX_SHIFT) | NMK_GPIO_ALT_C) - -/* Pull up/down values */ -enum nmk_gpio_pull { - NMK_GPIO_PULL_NONE, - NMK_GPIO_PULL_UP, - NMK_GPIO_PULL_DOWN, -}; - -/* Sleep mode */ -enum nmk_gpio_slpm { - NMK_GPIO_SLPM_INPUT, - NMK_GPIO_SLPM_WAKEUP_ENABLE = NMK_GPIO_SLPM_INPUT, - NMK_GPIO_SLPM_NOCHANGE, - NMK_GPIO_SLPM_WAKEUP_DISABLE = NMK_GPIO_SLPM_NOCHANGE, -}; - -/* - * Platform data to register a block: only the initial gpio/irq number. - */ -struct nmk_gpio_platform_data { - char *name; - int first_gpio; - int first_irq; - int num_gpio; - u32 (*get_secondary_status)(unsigned int bank); - void (*set_ioforce)(bool enable); - bool supports_sleepmode; -}; - -#endif /* __PLAT_NOMADIK_GPIO */ |