diff options
-rw-r--r-- | drivers/cpufreq/Kconfig | 10 | ||||
-rw-r--r-- | drivers/cpufreq/Makefile | 1 | ||||
-rw-r--r-- | drivers/cpufreq/ls1x-cpufreq.c | 223 |
3 files changed, 234 insertions, 0 deletions
diff --git a/drivers/cpufreq/Kconfig b/drivers/cpufreq/Kconfig index 73df7db..4de4dfa 100644 --- a/drivers/cpufreq/Kconfig +++ b/drivers/cpufreq/Kconfig @@ -249,6 +249,16 @@ config LOONGSON2_CPUFREQ If in doubt, say N. +config LOONGSON1_CPUFREQ + tristate "Loongson1 CPUFreq Driver" + help + This option adds a CPUFreq driver for loongson1 processors which + support software configurable cpu frequency. + + For details, take a look at <file:Documentation/cpu-freq/>. + + If in doubt, say N. + endmenu menu "PowerPC CPU frequency scaling drivers" diff --git a/drivers/cpufreq/Makefile b/drivers/cpufreq/Makefile index 40c53dc..215e447 100644 --- a/drivers/cpufreq/Makefile +++ b/drivers/cpufreq/Makefile @@ -98,6 +98,7 @@ obj-$(CONFIG_CRIS_MACH_ARTPEC3) += cris-artpec3-cpufreq.o obj-$(CONFIG_ETRAXFS) += cris-etraxfs-cpufreq.o obj-$(CONFIG_IA64_ACPI_CPUFREQ) += ia64-acpi-cpufreq.o obj-$(CONFIG_LOONGSON2_CPUFREQ) += loongson2_cpufreq.o +obj-$(CONFIG_LOONGSON1_CPUFREQ) += ls1x-cpufreq.o obj-$(CONFIG_SH_CPU_FREQ) += sh-cpufreq.o obj-$(CONFIG_SPARC_US2E_CPUFREQ) += sparc-us2e-cpufreq.o obj-$(CONFIG_SPARC_US3_CPUFREQ) += sparc-us3-cpufreq.o diff --git a/drivers/cpufreq/ls1x-cpufreq.c b/drivers/cpufreq/ls1x-cpufreq.c new file mode 100644 index 0000000..25fbd6a --- /dev/null +++ b/drivers/cpufreq/ls1x-cpufreq.c @@ -0,0 +1,223 @@ +/* + * CPU Frequency Scaling for Loongson 1 SoC + * + * Copyright (C) 2014 Zhang, Keguang <keguang.zhang@gmail.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. + */ + +#include <linux/clk.h> +#include <linux/clk-provider.h> +#include <linux/cpu.h> +#include <linux/cpufreq.h> +#include <linux/delay.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/slab.h> + +#include <asm/mach-loongson1/cpufreq.h> +#include <asm/mach-loongson1/loongson1.h> + +static struct { + struct device *dev; + struct clk *clk; /* CPU clk */ + struct clk *mux_clk; /* MUX of CPU clk */ + struct clk *pll_clk; /* PLL clk */ + struct clk *osc_clk; /* OSC clk */ + unsigned int max_freq; + unsigned int min_freq; +} ls1x_cpufreq; + +static int ls1x_cpufreq_notifier(struct notifier_block *nb, + unsigned long val, void *data) +{ + if (val == CPUFREQ_POSTCHANGE) + current_cpu_data.udelay_val = loops_per_jiffy; + + return NOTIFY_OK; +} + +static struct notifier_block ls1x_cpufreq_notifier_block = { + .notifier_call = ls1x_cpufreq_notifier +}; + +static int ls1x_cpufreq_target(struct cpufreq_policy *policy, + unsigned int index) +{ + unsigned int old_freq, new_freq; + + old_freq = policy->cur; + new_freq = policy->freq_table[index].frequency; + + /* + * The procedure of reconfiguring CPU clk is as below. + * + * - Reparent CPU clk to OSC clk + * - Reset CPU clock (very important) + * - Reconfigure CPU DIV + * - Reparent CPU clk back to CPU DIV clk + */ + + dev_dbg(ls1x_cpufreq.dev, "%u KHz --> %u KHz\n", old_freq, new_freq); + clk_set_parent(policy->clk, ls1x_cpufreq.osc_clk); + __raw_writel(__raw_readl(LS1X_CLK_PLL_DIV) | RST_CPU_EN | RST_CPU, + LS1X_CLK_PLL_DIV); + __raw_writel(__raw_readl(LS1X_CLK_PLL_DIV) & ~(RST_CPU_EN | RST_CPU), + LS1X_CLK_PLL_DIV); + clk_set_rate(ls1x_cpufreq.mux_clk, new_freq * 1000); + clk_set_parent(policy->clk, ls1x_cpufreq.mux_clk); + + return 0; +} + +static int ls1x_cpufreq_init(struct cpufreq_policy *policy) +{ + struct cpufreq_frequency_table *freq_tbl; + unsigned int pll_freq, freq; + int steps, i, ret; + + pll_freq = clk_get_rate(ls1x_cpufreq.pll_clk) / 1000; + + steps = 1 << DIV_CPU_WIDTH; + freq_tbl = kzalloc(sizeof(*freq_tbl) * steps, GFP_KERNEL); + if (!freq_tbl) { + dev_err(ls1x_cpufreq.dev, + "failed to alloc cpufreq_frequency_table\n"); + ret = -ENOMEM; + goto out; + } + + for (i = 0; i < (steps - 1); i++) { + freq = pll_freq / (i + 1); + if ((freq < ls1x_cpufreq.min_freq) || + (freq > ls1x_cpufreq.max_freq)) + freq_tbl[i].frequency = CPUFREQ_ENTRY_INVALID; + else + freq_tbl[i].frequency = freq; + dev_dbg(ls1x_cpufreq.dev, + "cpufreq table: index %d: frequency %d\n", i, + freq_tbl[i].frequency); + } + freq_tbl[i].frequency = CPUFREQ_TABLE_END; + + policy->clk = ls1x_cpufreq.clk; + ret = cpufreq_generic_init(policy, freq_tbl, 0); + if (ret) + kfree(freq_tbl); +out: + return ret; +} + +static int ls1x_cpufreq_exit(struct cpufreq_policy *policy) +{ + kfree(policy->freq_table); + return 0; +} + +static struct cpufreq_driver ls1x_cpufreq_driver = { + .name = "cpufreq-ls1x", + .flags = CPUFREQ_STICKY | CPUFREQ_NEED_INITIAL_FREQ_CHECK, + .verify = cpufreq_generic_frequency_table_verify, + .target_index = ls1x_cpufreq_target, + .get = cpufreq_generic_get, + .init = ls1x_cpufreq_init, + .exit = ls1x_cpufreq_exit, + .attr = cpufreq_generic_attr, +}; + +static int ls1x_cpufreq_remove(struct platform_device *pdev) +{ + cpufreq_unregister_notifier(&ls1x_cpufreq_notifier_block, + CPUFREQ_TRANSITION_NOTIFIER); + cpufreq_unregister_driver(&ls1x_cpufreq_driver); + + return 0; +} + +static int ls1x_cpufreq_probe(struct platform_device *pdev) +{ + struct plat_ls1x_cpufreq *pdata = pdev->dev.platform_data; + struct clk *clk; + int ret; + + if (!pdata || !pdata->clk_name || !pdata->osc_clk_name) + return -EINVAL; + + ls1x_cpufreq.dev = &pdev->dev; + + clk = devm_clk_get(&pdev->dev, pdata->clk_name); + if (IS_ERR(clk)) { + dev_err(ls1x_cpufreq.dev, "unable to get %s clock\n", + pdata->clk_name); + ret = PTR_ERR(clk); + goto out; + } + ls1x_cpufreq.clk = clk; + + clk = clk_get_parent(clk); + if (IS_ERR(clk)) { + dev_err(ls1x_cpufreq.dev, "unable to get parent of %s clock\n", + __clk_get_name(ls1x_cpufreq.clk)); + ret = PTR_ERR(clk); + goto out; + } + ls1x_cpufreq.mux_clk = clk; + + clk = clk_get_parent(clk); + if (IS_ERR(clk)) { + dev_err(ls1x_cpufreq.dev, "unable to get parent of %s clock\n", + __clk_get_name(ls1x_cpufreq.mux_clk)); + ret = PTR_ERR(clk); + goto out; + } + ls1x_cpufreq.pll_clk = clk; + + clk = devm_clk_get(&pdev->dev, pdata->osc_clk_name); + if (IS_ERR(clk)) { + dev_err(ls1x_cpufreq.dev, "unable to get %s clock\n", + pdata->osc_clk_name); + ret = PTR_ERR(clk); + goto out; + } + ls1x_cpufreq.osc_clk = clk; + + ls1x_cpufreq.max_freq = pdata->max_freq; + ls1x_cpufreq.min_freq = pdata->min_freq; + + ret = cpufreq_register_driver(&ls1x_cpufreq_driver); + if (ret) { + dev_err(ls1x_cpufreq.dev, + "failed to register cpufreq driver: %d\n", ret); + goto out; + } + + ret = cpufreq_register_notifier(&ls1x_cpufreq_notifier_block, + CPUFREQ_TRANSITION_NOTIFIER); + + if (!ret) + goto out; + + dev_err(ls1x_cpufreq.dev, "failed to register cpufreq notifier: %d\n", + ret); + + cpufreq_unregister_driver(&ls1x_cpufreq_driver); +out: + return ret; +} + +static struct platform_driver ls1x_cpufreq_platdrv = { + .driver = { + .name = "ls1x-cpufreq", + .owner = THIS_MODULE, + }, + .probe = ls1x_cpufreq_probe, + .remove = ls1x_cpufreq_remove, +}; + +module_platform_driver(ls1x_cpufreq_platdrv); + +MODULE_AUTHOR("Kelvin Cheung <keguang.zhang@gmail.com>"); +MODULE_DESCRIPTION("Loongson 1 CPUFreq driver"); +MODULE_LICENSE("GPL"); |