diff options
555 files changed, 11264 insertions, 9462 deletions
diff --git a/Documentation/ABI/testing/sysfs-class-scsi_host b/Documentation/ABI/testing/sysfs-class-scsi_host new file mode 100644 index 0000000..29a4f89 --- /dev/null +++ b/Documentation/ABI/testing/sysfs-class-scsi_host @@ -0,0 +1,13 @@ +What: /sys/class/scsi_host/hostX/isci_id +Date: June 2011 +Contact: Dave Jiang <dave.jiang@intel.com> +Description: + This file contains the enumerated host ID for the Intel + SCU controller. The Intel(R) C600 Series Chipset SATA/SAS + Storage Control Unit embeds up to two 4-port controllers in + a single PCI device. The controllers are enumerated in order + which usually means the lowest number scsi_host corresponds + with the first controller, but this association is not + guaranteed. The 'isci_id' attribute unambiguously identifies + the controller index: '0' for the first controller, + '1' for the second. diff --git a/Documentation/cgroups/memory.txt b/Documentation/cgroups/memory.txt index 6f3c598..06eb6d9 100644 --- a/Documentation/cgroups/memory.txt +++ b/Documentation/cgroups/memory.txt @@ -380,7 +380,7 @@ will be charged as a new owner of it. 5.2 stat file -5.2.1 memory.stat file includes following statistics +memory.stat file includes following statistics # per-memory cgroup local status cache - # of bytes of page cache memory. @@ -438,89 +438,6 @@ Note: file_mapped is accounted only when the memory cgroup is owner of page cache.) -5.2.2 memory.vmscan_stat - -memory.vmscan_stat includes statistics information for memory scanning and -freeing, reclaiming. The statistics shows memory scanning information since -memory cgroup creation and can be reset to 0 by writing 0 as - - #echo 0 > ../memory.vmscan_stat - -This file contains following statistics. - -[param]_[file_or_anon]_pages_by_[reason]_[under_heararchy] -[param]_elapsed_ns_by_[reason]_[under_hierarchy] - -For example, - - scanned_file_pages_by_limit indicates the number of scanned - file pages at vmscan. - -Now, 3 parameters are supported - - scanned - the number of pages scanned by vmscan - rotated - the number of pages activated at vmscan - freed - the number of pages freed by vmscan - -If "rotated" is high against scanned/freed, the memcg seems busy. - -Now, 2 reason are supported - - limit - the memory cgroup's limit - system - global memory pressure + softlimit - (global memory pressure not under softlimit is not handled now) - -When under_hierarchy is added in the tail, the number indicates the -total memcg scan of its children and itself. - -elapsed_ns is a elapsed time in nanosecond. This may include sleep time -and not indicates CPU usage. So, please take this as just showing -latency. - -Here is an example. - -# cat /cgroup/memory/A/memory.vmscan_stat -scanned_pages_by_limit 9471864 -scanned_anon_pages_by_limit 6640629 -scanned_file_pages_by_limit 2831235 -rotated_pages_by_limit 4243974 -rotated_anon_pages_by_limit 3971968 -rotated_file_pages_by_limit 272006 -freed_pages_by_limit 2318492 -freed_anon_pages_by_limit 962052 -freed_file_pages_by_limit 1356440 -elapsed_ns_by_limit 351386416101 -scanned_pages_by_system 0 -scanned_anon_pages_by_system 0 -scanned_file_pages_by_system 0 -rotated_pages_by_system 0 -rotated_anon_pages_by_system 0 -rotated_file_pages_by_system 0 -freed_pages_by_system 0 -freed_anon_pages_by_system 0 -freed_file_pages_by_system 0 -elapsed_ns_by_system 0 -scanned_pages_by_limit_under_hierarchy 9471864 -scanned_anon_pages_by_limit_under_hierarchy 6640629 -scanned_file_pages_by_limit_under_hierarchy 2831235 -rotated_pages_by_limit_under_hierarchy 4243974 -rotated_anon_pages_by_limit_under_hierarchy 3971968 -rotated_file_pages_by_limit_under_hierarchy 272006 -freed_pages_by_limit_under_hierarchy 2318492 -freed_anon_pages_by_limit_under_hierarchy 962052 -freed_file_pages_by_limit_under_hierarchy 1356440 -elapsed_ns_by_limit_under_hierarchy 351386416101 -scanned_pages_by_system_under_hierarchy 0 -scanned_anon_pages_by_system_under_hierarchy 0 -scanned_file_pages_by_system_under_hierarchy 0 -rotated_pages_by_system_under_hierarchy 0 -rotated_anon_pages_by_system_under_hierarchy 0 -rotated_file_pages_by_system_under_hierarchy 0 -freed_pages_by_system_under_hierarchy 0 -freed_anon_pages_by_system_under_hierarchy 0 -freed_file_pages_by_system_under_hierarchy 0 -elapsed_ns_by_system_under_hierarchy 0 - 5.3 swappiness Similar to /proc/sys/vm/swappiness, but affecting a hierarchy of groups only. diff --git a/Documentation/hwmon/coretemp b/Documentation/hwmon/coretemp index fa8776a..84d46c0 100644 --- a/Documentation/hwmon/coretemp +++ b/Documentation/hwmon/coretemp @@ -35,13 +35,6 @@ the Out-Of-Spec bit. Following table summarizes the exported sysfs files: All Sysfs entries are named with their core_id (represented here by 'X'). tempX_input - Core temperature (in millidegrees Celsius). tempX_max - All cooling devices should be turned on (on Core2). - Initialized with IA32_THERM_INTERRUPT. When the CPU - temperature reaches this temperature, an interrupt is - generated and tempX_max_alarm is set. -tempX_max_hyst - If the CPU temperature falls below than temperature, - an interrupt is generated and tempX_max_alarm is reset. -tempX_max_alarm - Set if the temperature reaches or exceeds tempX_max. - Reset if the temperature drops to or below tempX_max_hyst. tempX_crit - Maximum junction temperature (in millidegrees Celsius). tempX_crit_alarm - Set when Out-of-spec bit is set, never clears. Correct CPU operation is no longer guaranteed. @@ -49,9 +42,10 @@ tempX_label - Contains string "Core X", where X is processor number. For Package temp, this will be "Physical id Y", where Y is the package number. -The TjMax temperature is set to 85 degrees C if undocumented model specific -register (UMSR) 0xee has bit 30 set. If not the TjMax is 100 degrees C as -(sometimes) documented in processor datasheet. +On CPU models which support it, TjMax is read from a model-specific register. +On other models, it is set to an arbitrary value based on weak heuristics. +If these heuristics don't work for you, you can pass the correct TjMax value +as a module parameter (tjmax). Appendix A. Known TjMax lists (TBD): Some information comes from ark.intel.com diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 614d038..854ed5ca 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -2086,9 +2086,12 @@ bytes respectively. Such letter suffixes can also be entirely omitted. Override pmtimer IOPort with a hex value. e.g. pmtmr=0x508 - pnp.debug [PNP] - Enable PNP debug messages. This depends on the - CONFIG_PNP_DEBUG_MESSAGES option. + pnp.debug=1 [PNP] + Enable PNP debug messages (depends on the + CONFIG_PNP_DEBUG_MESSAGES option). Change at run-time + via /sys/module/pnp/parameters/debug. We always show + current resource usage; turning this on also shows + possible settings and some assignment information. pnpacpi= [ACPI] { off } diff --git a/Documentation/networking/dmfe.txt b/Documentation/networking/dmfe.txt index 8006c22..25320bf 100644 --- a/Documentation/networking/dmfe.txt +++ b/Documentation/networking/dmfe.txt @@ -1,3 +1,5 @@ +Note: This driver doesn't have a maintainer. + Davicom DM9102(A)/DM9132/DM9801 fast ethernet driver for Linux. This program is free software; you can redistribute it and/or @@ -55,7 +57,6 @@ Test and make sure PCI latency is now correct for all cases. Authors: Sten Wang <sten_wang@davicom.com.tw > : Original Author -Tobias Ringstrom <tori@unhappy.mine.nu> : Current Maintainer Contributors: diff --git a/Documentation/vm/transhuge.txt b/Documentation/vm/transhuge.txt index 0924aac..29bdf62 100644 --- a/Documentation/vm/transhuge.txt +++ b/Documentation/vm/transhuge.txt @@ -123,10 +123,11 @@ be automatically shutdown if it's set to "never". khugepaged runs usually at low frequency so while one may not want to invoke defrag algorithms synchronously during the page faults, it should be worth invoking defrag at least in khugepaged. However it's -also possible to disable defrag in khugepaged: +also possible to disable defrag in khugepaged by writing 0 or enable +defrag in khugepaged by writing 1: -echo yes >/sys/kernel/mm/transparent_hugepage/khugepaged/defrag -echo no >/sys/kernel/mm/transparent_hugepage/khugepaged/defrag +echo 0 >/sys/kernel/mm/transparent_hugepage/khugepaged/defrag +echo 1 >/sys/kernel/mm/transparent_hugepage/khugepaged/defrag You can also control how many pages khugepaged should scan at each pass: diff --git a/MAINTAINERS b/MAINTAINERS index 28f65c2..ae8820e 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -1278,7 +1278,6 @@ F: drivers/input/misc/ati_remote2.c ATLX ETHERNET DRIVERS M: Jay Cliburn <jcliburn@gmail.com> M: Chris Snook <chris.snook@gmail.com> -M: Jie Yang <jie.yang@atheros.com> L: netdev@vger.kernel.org W: http://sourceforge.net/projects/atl1 W: http://atl1.sourceforge.net @@ -1574,7 +1573,6 @@ F: drivers/scsi/bfa/ BROCADE BNA 10 GIGABIT ETHERNET DRIVER M: Rasesh Mody <rmody@brocade.com> -M: Debashis Dutt <ddutt@brocade.com> L: netdev@vger.kernel.org S: Supported F: drivers/net/bna/ @@ -1758,7 +1756,6 @@ F: Documentation/zh_CN/ CISCO VIC ETHERNET NIC DRIVER M: Christian Benvenuti <benve@cisco.com> -M: Vasanthy Kolluri <vkolluri@cisco.com> M: Roopa Prabhu <roprabhu@cisco.com> M: David Wang <dwang2@cisco.com> S: Supported @@ -3262,6 +3259,17 @@ F: Documentation/input/multi-touch-protocol.txt F: drivers/input/input-mt.c K: \b(ABS|SYN)_MT_ +INTEL C600 SERIES SAS CONTROLLER DRIVER +M: Intel SCU Linux support <intel-linux-scu@intel.com> +M: Dan Williams <dan.j.williams@intel.com> +M: Dave Jiang <dave.jiang@intel.com> +M: Ed Nadolski <edmund.nadolski@intel.com> +L: linux-scsi@vger.kernel.org +T: git git://git.kernel.org/pub/scm/linux/kernel/git/djbw/isci.git +S: Maintained +F: drivers/scsi/isci/ +F: firmware/isci/ + INTEL IDLE DRIVER M: Len Brown <lenb@kernel.org> L: linux-pm@lists.linux-foundation.org @@ -4404,7 +4412,8 @@ L: netfilter@vger.kernel.org L: coreteam@netfilter.org W: http://www.netfilter.org/ W: http://www.iptables.org/ -T: git git://git.kernel.org/pub/scm/linux/kernel/git/kaber/nf-2.6.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-2.6.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf-next-2.6.git S: Supported F: include/linux/netfilter* F: include/linux/netfilter/ @@ -4774,7 +4783,7 @@ F: drivers/net/wireless/orinoco/ OSD LIBRARY and FILESYSTEM M: Boaz Harrosh <bharrosh@panasas.com> -M: Benny Halevy <bhalevy@panasas.com> +M: Benny Halevy <bhalevy@tonian.com> L: osd-dev@open-osd.org W: http://open-osd.org T: git git://git.open-osd.org/open-osd.git @@ -7200,6 +7209,9 @@ W: http://opensource.wolfsonmicro.com/content/linux-drivers-wolfson-devices S: Supported F: Documentation/hwmon/wm83?? F: drivers/leds/leds-wm83*.c +F: drivers/input/misc/wm831x-on.c +F: drivers/input/touchscreen/wm831x-ts.c +F: drivers/input/touchscreen/wm97*.c F: drivers/mfd/wm8*.c F: drivers/power/wm83*.c F: drivers/rtc/rtc-wm83*.c @@ -7209,6 +7221,7 @@ F: drivers/watchdog/wm83*_wdt.c F: include/linux/mfd/wm831x/ F: include/linux/mfd/wm8350/ F: include/linux/mfd/wm8400* +F: include/linux/wm97xx.h F: include/sound/wm????.h F: sound/soc/codecs/wm* @@ -1,7 +1,7 @@ VERSION = 3 PATCHLEVEL = 1 SUBLEVEL = 0 -EXTRAVERSION = -rc6 +EXTRAVERSION = -rc8 NAME = "Divemaster Edition" # *DOCUMENTATION* diff --git a/arch/alpha/Kconfig b/arch/alpha/Kconfig index 60cde53..8bb9362 100644 --- a/arch/alpha/Kconfig +++ b/arch/alpha/Kconfig @@ -51,7 +51,7 @@ config GENERIC_CMOS_UPDATE def_bool y config GENERIC_GPIO - def_bool y + bool config ZONE_DMA bool diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 3269576..bea81d0 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -724,9 +724,6 @@ config ARCH_S3C64XX select SAMSUNG_IRQ_VIC_TIMER select SAMSUNG_IRQ_UART select S3C_GPIO_TRACK - select S3C_GPIO_PULL_UPDOWN - select S3C_GPIO_CFG_S3C24XX - select S3C_GPIO_CFG_S3C64XX select S3C_DEV_NAND select USB_ARCH_HAS_OHCI select SAMSUNG_GPIOLIB_4BIT @@ -1283,6 +1280,20 @@ config ARM_ERRATA_364296 processor into full low interrupt latency mode. ARM11MPCore is not affected. +config ARM_ERRATA_764369 + bool "ARM errata: Data cache line maintenance operation by MVA may not succeed" + depends on CPU_V7 && SMP + help + This option enables the workaround for erratum 764369 + affecting Cortex-A9 MPCore with two or more processors (all + current revisions). Under certain timing circumstances, a data + cache line maintenance operation by MVA targeting an Inner + Shareable memory region may fail to proceed up to either the + Point of Coherency or to the Point of Unification of the + system. This workaround adds a DSB instruction before the + relevant cache maintenance functions and sets a specific bit + in the diagnostic control register of the SCU. + endmenu source "arch/arm/common/Kconfig" diff --git a/arch/arm/boot/dts/tegra-harmony.dts b/arch/arm/boot/dts/tegra-harmony.dts index 4c05334..e581866 100644 --- a/arch/arm/boot/dts/tegra-harmony.dts +++ b/arch/arm/boot/dts/tegra-harmony.dts @@ -57,14 +57,14 @@ }; sdhci@c8000200 { - gpios = <&gpio 69 0>, /* cd, gpio PI5 */ - <&gpio 57 0>, /* wp, gpio PH1 */ - <&gpio 155 0>; /* power, gpio PT3 */ + cd-gpios = <&gpio 69 0>; /* gpio PI5 */ + wp-gpios = <&gpio 57 0>; /* gpio PH1 */ + power-gpios = <&gpio 155 0>; /* gpio PT3 */ }; sdhci@c8000600 { - gpios = <&gpio 58 0>, /* cd, gpio PH2 */ - <&gpio 59 0>, /* wp, gpio PH3 */ - <&gpio 70 0>; /* power, gpio PI6 */ + cd-gpios = <&gpio 58 0>; /* gpio PH2 */ + wp-gpios = <&gpio 59 0>; /* gpio PH3 */ + power-gpios = <&gpio 70 0>; /* gpio PI6 */ }; }; diff --git a/arch/arm/boot/dts/tegra-seaboard.dts b/arch/arm/boot/dts/tegra-seaboard.dts index 1940cae..64cedca 100644 --- a/arch/arm/boot/dts/tegra-seaboard.dts +++ b/arch/arm/boot/dts/tegra-seaboard.dts @@ -21,8 +21,8 @@ }; sdhci@c8000400 { - gpios = <&gpio 69 0>, /* cd, gpio PI5 */ - <&gpio 57 0>, /* wp, gpio PH1 */ - <&gpio 70 0>; /* power, gpio PI6 */ + cd-gpios = <&gpio 69 0>; /* gpio PI5 */ + wp-gpios = <&gpio 57 0>; /* gpio PH1 */ + power-gpios = <&gpio 70 0>; /* gpio PI6 */ }; }; diff --git a/arch/arm/include/asm/futex.h b/arch/arm/include/asm/futex.h index 8c73900..253cc86 100644 --- a/arch/arm/include/asm/futex.h +++ b/arch/arm/include/asm/futex.h @@ -25,17 +25,17 @@ #ifdef CONFIG_SMP -#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \ +#define __futex_atomic_op(insn, ret, oldval, tmp, uaddr, oparg) \ smp_mb(); \ __asm__ __volatile__( \ - "1: ldrex %1, [%2]\n" \ + "1: ldrex %1, [%3]\n" \ " " insn "\n" \ - "2: strex %1, %0, [%2]\n" \ - " teq %1, #0\n" \ + "2: strex %2, %0, [%3]\n" \ + " teq %2, #0\n" \ " bne 1b\n" \ " mov %0, #0\n" \ - __futex_atomic_ex_table("%4") \ - : "=&r" (ret), "=&r" (oldval) \ + __futex_atomic_ex_table("%5") \ + : "=&r" (ret), "=&r" (oldval), "=&r" (tmp) \ : "r" (uaddr), "r" (oparg), "Ir" (-EFAULT) \ : "cc", "memory") @@ -73,14 +73,14 @@ futex_atomic_cmpxchg_inatomic(u32 *uval, u32 __user *uaddr, #include <linux/preempt.h> #include <asm/domain.h> -#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \ +#define __futex_atomic_op(insn, ret, oldval, tmp, uaddr, oparg) \ __asm__ __volatile__( \ - "1: " T(ldr) " %1, [%2]\n" \ + "1: " T(ldr) " %1, [%3]\n" \ " " insn "\n" \ - "2: " T(str) " %0, [%2]\n" \ + "2: " T(str) " %0, [%3]\n" \ " mov %0, #0\n" \ - __futex_atomic_ex_table("%4") \ - : "=&r" (ret), "=&r" (oldval) \ + __futex_atomic_ex_table("%5") \ + : "=&r" (ret), "=&r" (oldval), "=&r" (tmp) \ : "r" (uaddr), "r" (oparg), "Ir" (-EFAULT) \ : "cc", "memory") @@ -117,7 +117,7 @@ futex_atomic_op_inuser (int encoded_op, u32 __user *uaddr) int cmp = (encoded_op >> 24) & 15; int oparg = (encoded_op << 8) >> 20; int cmparg = (encoded_op << 20) >> 20; - int oldval = 0, ret; + int oldval = 0, ret, tmp; if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28)) oparg = 1 << oparg; @@ -129,19 +129,19 @@ futex_atomic_op_inuser (int encoded_op, u32 __user *uaddr) switch (op) { case FUTEX_OP_SET: - __futex_atomic_op("mov %0, %3", ret, oldval, uaddr, oparg); + __futex_atomic_op("mov %0, %4", ret, oldval, tmp, uaddr, oparg); break; case FUTEX_OP_ADD: - __futex_atomic_op("add %0, %1, %3", ret, oldval, uaddr, oparg); + __futex_atomic_op("add %0, %1, %4", ret, oldval, tmp, uaddr, oparg); break; case FUTEX_OP_OR: - __futex_atomic_op("orr %0, %1, %3", ret, oldval, uaddr, oparg); + __futex_atomic_op("orr %0, %1, %4", ret, oldval, tmp, uaddr, oparg); break; case FUTEX_OP_ANDN: - __futex_atomic_op("and %0, %1, %3", ret, oldval, uaddr, ~oparg); + __futex_atomic_op("and %0, %1, %4", ret, oldval, tmp, uaddr, ~oparg); break; case FUTEX_OP_XOR: - __futex_atomic_op("eor %0, %1, %3", ret, oldval, uaddr, oparg); + __futex_atomic_op("eor %0, %1, %4", ret, oldval, tmp, uaddr, oparg); break; default: ret = -ENOSYS; diff --git a/arch/arm/include/asm/hardware/pl080.h b/arch/arm/include/asm/hardware/pl080.h index e4a04e4..33c78d7 100644 --- a/arch/arm/include/asm/hardware/pl080.h +++ b/arch/arm/include/asm/hardware/pl080.h @@ -21,6 +21,9 @@ * OneNAND features. */ +#ifndef ASM_PL080_H +#define ASM_PL080_H + #define PL080_INT_STATUS (0x00) #define PL080_TC_STATUS (0x04) #define PL080_TC_CLEAR (0x08) @@ -138,3 +141,4 @@ struct pl080s_lli { u32 control1; }; +#endif /* ASM_PL080_H */ diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h index 2c04ed5..c60a294 100644 --- a/arch/arm/include/asm/unistd.h +++ b/arch/arm/include/asm/unistd.h @@ -478,8 +478,8 @@ /* * Unimplemented (or alternatively implemented) syscalls */ -#define __IGNORE_fadvise64_64 1 -#define __IGNORE_migrate_pages 1 +#define __IGNORE_fadvise64_64 +#define __IGNORE_migrate_pages #endif /* __KERNEL__ */ #endif /* __ASM_ARM_UNISTD_H */ diff --git a/arch/arm/kernel/smp_scu.c b/arch/arm/kernel/smp_scu.c index 79ed5e7..7fcddb7 100644 --- a/arch/arm/kernel/smp_scu.c +++ b/arch/arm/kernel/smp_scu.c @@ -13,6 +13,7 @@ #include <asm/smp_scu.h> #include <asm/cacheflush.h> +#include <asm/cputype.h> #define SCU_CTRL 0x00 #define SCU_CONFIG 0x04 @@ -37,6 +38,15 @@ void __init scu_enable(void __iomem *scu_base) { u32 scu_ctrl; +#ifdef CONFIG_ARM_ERRATA_764369 + /* Cortex-A9 only */ + if ((read_cpuid(CPUID_ID) & 0xff0ffff0) == 0x410fc090) { + scu_ctrl = __raw_readl(scu_base + 0x30); + if (!(scu_ctrl & 1)) + __raw_writel(scu_ctrl | 0x1, scu_base + 0x30); + } +#endif + scu_ctrl = __raw_readl(scu_base + SCU_CTRL); /* already enabled? */ if (scu_ctrl & 1) diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index bf977f8..4e66f62 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S @@ -23,8 +23,10 @@ #if defined(CONFIG_SMP_ON_UP) && !defined(CONFIG_DEBUG_SPINLOCK) #define ARM_EXIT_KEEP(x) x +#define ARM_EXIT_DISCARD(x) #else #define ARM_EXIT_KEEP(x) +#define ARM_EXIT_DISCARD(x) x #endif OUTPUT_ARCH(arm) @@ -39,6 +41,11 @@ jiffies = jiffies_64 + 4; SECTIONS { /* + * XXX: The linker does not define how output sections are + * assigned to input sections when there are multiple statements + * matching the same input section name. There is no documented + * order of matching. + * * unwind exit sections must be discarded before the rest of the * unwind sections get included. */ @@ -47,6 +54,9 @@ SECTIONS *(.ARM.extab.exit.text) ARM_CPU_DISCARD(*(.ARM.exidx.cpuexit.text)) ARM_CPU_DISCARD(*(.ARM.extab.cpuexit.text)) + ARM_EXIT_DISCARD(EXIT_TEXT) + ARM_EXIT_DISCARD(EXIT_DATA) + EXIT_CALL #ifndef CONFIG_HOTPLUG *(.ARM.exidx.devexit.text) *(.ARM.extab.devexit.text) @@ -58,6 +68,8 @@ SECTIONS #ifndef CONFIG_SMP_ON_UP *(.alt.smp.init) #endif + *(.discard) + *(.discard.*) } #ifdef CONFIG_XIP_KERNEL @@ -279,9 +291,6 @@ SECTIONS STABS_DEBUG .comment 0 : { *(.comment) } - - /* Default discards */ - DISCARDS } /* diff --git a/arch/arm/mach-dove/common.c b/arch/arm/mach-dove/common.c index 83dce85..a9e0dae 100644 --- a/arch/arm/mach-dove/common.c +++ b/arch/arm/mach-dove/common.c @@ -158,7 +158,7 @@ void __init dove_spi0_init(void) void __init dove_spi1_init(void) { - orion_spi_init(DOVE_SPI1_PHYS_BASE, get_tclk()); + orion_spi_1_init(DOVE_SPI1_PHYS_BASE, get_tclk()); } /***************************************************************************** diff --git a/arch/arm/mach-exynos4/Kconfig b/arch/arm/mach-exynos4/Kconfig index fec2385..2dad16c 100644 --- a/arch/arm/mach-exynos4/Kconfig +++ b/arch/arm/mach-exynos4/Kconfig @@ -11,7 +11,7 @@ if ARCH_EXYNOS4 config CPU_EXYNOS4210 bool - select S3C_PL330_DMA + select SAMSUNG_DMADEV help Enable EXYNOS4210 CPU support @@ -136,6 +136,14 @@ config MACH_SMDKV310 select S3C_DEV_RTC select S3C_DEV_WDT select S3C_DEV_I2C1 + select S5P_DEV_FIMC0 + select S5P_DEV_FIMC1 + select S5P_DEV_FIMC2 + select S5P_DEV_FIMC3 + select S5P_DEV_I2C_HDMIPHY + select S5P_DEV_MFC + select S5P_DEV_TV + select S5P_DEV_USB_EHCI select S3C_DEV_HSMMC select S3C_DEV_HSMMC1 select S3C_DEV_HSMMC2 @@ -150,6 +158,7 @@ config MACH_SMDKV310 select EXYNOS4_SETUP_I2C1 select EXYNOS4_SETUP_KEYPAD select EXYNOS4_SETUP_SDHCI + select EXYNOS4_SETUP_USB_PHY help Machine support for Samsung SMDKV310 @@ -175,19 +184,26 @@ config MACH_UNIVERSAL_C210 select S5P_DEV_FIMC1 select S5P_DEV_FIMC2 select S5P_DEV_FIMC3 + select S5P_DEV_CSIS0 + select S5P_DEV_FIMD0 select S3C_DEV_HSMMC select S3C_DEV_HSMMC2 select S3C_DEV_HSMMC3 select S3C_DEV_I2C1 select S3C_DEV_I2C3 select S3C_DEV_I2C5 + select S5P_DEV_I2C_HDMIPHY select S5P_DEV_MFC select S5P_DEV_ONENAND + select S5P_DEV_TV select EXYNOS4_DEV_PD + select EXYNOS4_SETUP_FIMD0 select EXYNOS4_SETUP_I2C1 select EXYNOS4_SETUP_I2C3 select EXYNOS4_SETUP_I2C5 select EXYNOS4_SETUP_SDHCI + select EXYNOS4_SETUP_FIMC + select S5P_SETUP_MIPIPHY help Machine support for Samsung Mobile Universal S5PC210 Reference Board. @@ -196,6 +212,8 @@ config MACH_NURI bool "Mobile NURI Board" select CPU_EXYNOS4210 select S3C_DEV_WDT + select S3C_DEV_RTC + select S5P_DEV_FIMD0 select S3C_DEV_HSMMC select S3C_DEV_HSMMC2 select S3C_DEV_HSMMC3 @@ -205,6 +223,7 @@ config MACH_NURI select S5P_DEV_MFC select S5P_DEV_USB_EHCI select EXYNOS4_DEV_PD + select EXYNOS4_SETUP_FIMD0 select EXYNOS4_SETUP_I2C1 select EXYNOS4_SETUP_I2C3 select EXYNOS4_SETUP_I2C5 @@ -220,8 +239,22 @@ config MACH_ORIGEN select CPU_EXYNOS4210 select S3C_DEV_RTC select S3C_DEV_WDT + select S3C_DEV_HSMMC select S3C_DEV_HSMMC2 + select S5P_DEV_FIMC0 + select S5P_DEV_FIMC1 + select S5P_DEV_FIMC2 + select S5P_DEV_FIMC3 + select S5P_DEV_FIMD0 + select S5P_DEV_I2C_HDMIPHY + select S5P_DEV_TV + select S5P_DEV_USB_EHCI + select EXYNOS4_DEV_PD + select SAMSUNG_DEV_BACKLIGHT + select SAMSUNG_DEV_PWM + select EXYNOS4_SETUP_FIMD0 select EXYNOS4_SETUP_SDHCI + select EXYNOS4_SETUP_USB_PHY help Machine support for ORIGEN based on Samsung EXYNOS4210 diff --git a/arch/arm/mach-exynos4/clock.c b/arch/arm/mach-exynos4/clock.c index 2a037cc..db61691 100644 --- a/arch/arm/mach-exynos4/clock.c +++ b/arch/arm/mach-exynos4/clock.c @@ -111,6 +111,11 @@ struct clk clk_sclk_usbphy1 = { .name = "sclk_usbphy1", }; +static struct clk dummy_apb_pclk = { + .name = "apb_pclk", + .id = -1, +}; + static int exynos4_clksrc_mask_top_ctrl(struct clk *clk, int enable) { return s5p_gatectrl(S5P_CLKSRC_MASK_TOP, clk, enable); @@ -146,6 +151,11 @@ static int exynos4_clk_ip_mfc_ctrl(struct clk *clk, int enable) return s5p_gatectrl(S5P_CLKGATE_IP_MFC, clk, enable); } +static int exynos4_clksrc_mask_tv_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P_CLKSRC_MASK_TV, clk, enable); +} + static int exynos4_clk_ip_cam_ctrl(struct clk *clk, int enable) { return s5p_gatectrl(S5P_CLKGATE_IP_CAM, clk, enable); @@ -186,6 +196,16 @@ static int exynos4_clk_ip_perir_ctrl(struct clk *clk, int enable) return s5p_gatectrl(S5P_CLKGATE_IP_PERIR, clk, enable); } +static int exynos4_clk_hdmiphy_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P_HDMI_PHY_CONTROL, clk, enable); +} + +static int exynos4_clk_dac_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P_DAC_PHY_CONTROL, clk, enable); +} + /* Core list of CMU_CPU side */ static struct clksrc_clk clk_mout_apll = { @@ -503,13 +523,48 @@ static struct clk init_clocks_off[] = { .enable = exynos4_clk_ip_fsys_ctrl, .ctrlbit = (1 << 9), }, { - .name = "pdma", - .devname = "s3c-pl330.0", + .name = "dac", + .devname = "s5p-sdo", + .enable = exynos4_clk_ip_tv_ctrl, + .ctrlbit = (1 << 2), + }, { + .name = "mixer", + .devname = "s5p-mixer", + .enable = exynos4_clk_ip_tv_ctrl, + .ctrlbit = (1 << 1), + }, { + .name = "vp", + .devname = "s5p-mixer", + .enable = exynos4_clk_ip_tv_ctrl, + .ctrlbit = (1 << 0), + }, { + .name = "hdmi", + .devname = "exynos4-hdmi", + .enable = exynos4_clk_ip_tv_ctrl, + .ctrlbit = (1 << 3), + }, { + .name = "hdmiphy", + .devname = "exynos4-hdmi", + .enable = exynos4_clk_hdmiphy_ctrl, + .ctrlbit = (1 << 0), + }, { + .name = "dacphy", + .devname = "s5p-sdo", + .enable = exynos4_clk_dac_ctrl, + .ctrlbit = (1 << 0), + }, { + .name = "sata", + .parent = &clk_aclk_133.clk, + .enable = exynos4_clk_ip_fsys_ctrl, + .ctrlbit = (1 << 10), + }, { + .name = "dma", + .devname = "dma-pl330.0", .enable = exynos4_clk_ip_fsys_ctrl, .ctrlbit = (1 << 0), }, { - .name = "pdma", - .devname = "s3c-pl330.1", + .name = "dma", + .devname = "dma-pl330.1", .enable = exynos4_clk_ip_fsys_ctrl, .ctrlbit = (1 << 1), }, { @@ -630,6 +685,12 @@ static struct clk init_clocks_off[] = { .enable = exynos4_clk_ip_peril_ctrl, .ctrlbit = (1 << 13), }, { + .name = "i2c", + .devname = "s3c2440-hdmiphy-i2c", + .parent = &clk_aclk_100.clk, + .enable = exynos4_clk_ip_peril_ctrl, + .ctrlbit = (1 << 14), + }, { .name = "SYSMMU_MDMA", .enable = exynos4_clk_ip_image_ctrl, .ctrlbit = (1 << 5), @@ -831,6 +892,81 @@ static struct clksrc_sources clkset_mout_mfc = { .nr_sources = ARRAY_SIZE(clkset_mout_mfc_list), }; +static struct clk *clkset_sclk_dac_list[] = { + [0] = &clk_sclk_vpll.clk, + [1] = &clk_sclk_hdmiphy, +}; + +static struct clksrc_sources clkset_sclk_dac = { + .sources = clkset_sclk_dac_list, + .nr_sources = ARRAY_SIZE(clkset_sclk_dac_list), +}; + +static struct clksrc_clk clk_sclk_dac = { + .clk = { + .name = "sclk_dac", + .enable = exynos4_clksrc_mask_tv_ctrl, + .ctrlbit = (1 << 8), + }, + .sources = &clkset_sclk_dac, + .reg_src = { .reg = S5P_CLKSRC_TV, .shift = 8, .size = 1 }, +}; + +static struct clksrc_clk clk_sclk_pixel = { + .clk = { + .name = "sclk_pixel", + .parent = &clk_sclk_vpll.clk, + }, + .reg_div = { .reg = S5P_CLKDIV_TV, .shift = 0, .size = 4 }, +}; + +static struct clk *clkset_sclk_hdmi_list[] = { + [0] = &clk_sclk_pixel.clk, + [1] = &clk_sclk_hdmiphy, +}; + +static struct clksrc_sources clkset_sclk_hdmi = { + .sources = clkset_sclk_hdmi_list, + .nr_sources = ARRAY_SIZE(clkset_sclk_hdmi_list), +}; + +static struct clksrc_clk clk_sclk_hdmi = { + .clk = { + .name = "sclk_hdmi", + .enable = exynos4_clksrc_mask_tv_ctrl, + .ctrlbit = (1 << 0), + }, + .sources = &clkset_sclk_hdmi, + .reg_src = { .reg = S5P_CLKSRC_TV, .shift = 0, .size = 1 }, +}; + +static struct clk *clkset_sclk_mixer_list[] = { + [0] = &clk_sclk_dac.clk, + [1] = &clk_sclk_hdmi.clk, +}; + +static struct clksrc_sources clkset_sclk_mixer = { + .sources = clkset_sclk_mixer_list, + .nr_sources = ARRAY_SIZE(clkset_sclk_mixer_list), +}; + +static struct clksrc_clk clk_sclk_mixer = { + .clk = { + .name = "sclk_mixer", + .enable = exynos4_clksrc_mask_tv_ctrl, + .ctrlbit = (1 << 4), + }, + .sources = &clkset_sclk_mixer, + .reg_src = { .reg = S5P_CLKSRC_TV, .shift = 4, .size = 1 }, +}; + +static struct clksrc_clk *sclk_tv[] = { + &clk_sclk_dac, + &clk_sclk_pixel, + &clk_sclk_hdmi, + &clk_sclk_mixer, +}; + static struct clksrc_clk clk_dout_mmc0 = { .clk = { .name = "dout_mmc0", @@ -948,8 +1084,7 @@ static struct clksrc_clk clksrcs[] = { .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 28, .size = 4 }, }, { .clk = { - .name = "sclk_cam", - .devname = "exynos4-fimc.0", + .name = "sclk_cam0", .enable = exynos4_clksrc_mask_cam_ctrl, .ctrlbit = (1 << 16), }, @@ -958,8 +1093,7 @@ static struct clksrc_clk clksrcs[] = { .reg_div = { .reg = S5P_CLKDIV_CAM, .shift = 16, .size = 4 }, }, { .clk = { - .name = "sclk_cam", - .devname = "exynos4-fimc.1", + .name = "sclk_cam1", .enable = exynos4_clksrc_mask_cam_ctrl, .ctrlbit = (1 << 20), }, @@ -1159,6 +1293,71 @@ static struct clk_ops exynos4_fout_apll_ops = { .get_rate = exynos4_fout_apll_get_rate, }; +static u32 vpll_div[][8] = { + { 54000000, 3, 53, 3, 1024, 0, 17, 0 }, + { 108000000, 3, 53, 2, 1024, 0, 17, 0 }, +}; + +static unsigned long exynos4_vpll_get_rate(struct clk *clk) +{ + return clk->rate; +} + +static int exynos4_vpll_set_rate(struct clk *clk, unsigned long rate) +{ + unsigned int vpll_con0, vpll_con1 = 0; + unsigned int i; + + /* Return if nothing changed */ + if (clk->rate == rate) + return 0; + + vpll_con0 = __raw_readl(S5P_VPLL_CON0); + vpll_con0 &= ~(0x1 << 27 | \ + PLL90XX_MDIV_MASK << PLL46XX_MDIV_SHIFT | \ + PLL90XX_PDIV_MASK << PLL46XX_PDIV_SHIFT | \ + PLL90XX_SDIV_MASK << PLL46XX_SDIV_SHIFT); + + vpll_con1 = __raw_readl(S5P_VPLL_CON1); + vpll_con1 &= ~(PLL46XX_MRR_MASK << PLL46XX_MRR_SHIFT | \ + PLL46XX_MFR_MASK << PLL46XX_MFR_SHIFT | \ + PLL4650C_KDIV_MASK << PLL46XX_KDIV_SHIFT); + + for (i = 0; i < ARRAY_SIZE(vpll_div); i++) { + if (vpll_div[i][0] == rate) { + vpll_con0 |= vpll_div[i][1] << PLL46XX_PDIV_SHIFT; + vpll_con0 |= vpll_div[i][2] << PLL46XX_MDIV_SHIFT; + vpll_con0 |= vpll_div[i][3] << PLL46XX_SDIV_SHIFT; + vpll_con1 |= vpll_div[i][4] << PLL46XX_KDIV_SHIFT; + vpll_con1 |= vpll_div[i][5] << PLL46XX_MFR_SHIFT; + vpll_con1 |= vpll_div[i][6] << PLL46XX_MRR_SHIFT; + vpll_con0 |= vpll_div[i][7] << 27; + break; + } + } + + if (i == ARRAY_SIZE(vpll_div)) { + printk(KERN_ERR "%s: Invalid Clock VPLL Frequency\n", + __func__); + return -EINVAL; + } + + __raw_writel(vpll_con0, S5P_VPLL_CON0); + __raw_writel(vpll_con1, S5P_VPLL_CON1); + + /* Wait for VPLL lock */ + while (!(__raw_readl(S5P_VPLL_CON0) & (1 << PLL46XX_LOCKED_SHIFT))) + continue; + + clk->rate = rate; + return 0; +} + +static struct clk_ops exynos4_vpll_ops = { + .get_rate = exynos4_vpll_get_rate, + .set_rate = exynos4_vpll_set_rate, +}; + void __init_or_cpufreq exynos4_setup_clocks(void) { struct clk *xtal_clk; @@ -1216,6 +1415,7 @@ void __init_or_cpufreq exynos4_setup_clocks(void) clk_fout_apll.ops = &exynos4_fout_apll_ops; clk_fout_mpll.rate = mpll; clk_fout_epll.rate = epll; + clk_fout_vpll.ops = &exynos4_vpll_ops; clk_fout_vpll.rate = vpll; printk(KERN_INFO "EXYNOS4: PLL settings, A=%ld, M=%ld, E=%ld V=%ld", @@ -1243,7 +1443,10 @@ void __init_or_cpufreq exynos4_setup_clocks(void) } static struct clk *clks[] __initdata = { - /* Nothing here yet */ + &clk_sclk_hdmi27m, + &clk_sclk_hdmiphy, + &clk_sclk_usbphy0, + &clk_sclk_usbphy1, }; #ifdef CONFIG_PM_SLEEP @@ -1277,6 +1480,9 @@ void __init exynos4_register_clocks(void) for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++) s3c_register_clksrc(sysclks[ptr], 1); + for (ptr = 0; ptr < ARRAY_SIZE(sclk_tv); ptr++) + s3c_register_clksrc(sclk_tv[ptr], 1); + s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs)); s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks)); @@ -1284,5 +1490,7 @@ void __init exynos4_register_clocks(void) s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); register_syscore_ops(&exynos4_clock_syscore_ops); + s3c24xx_register_clock(&dummy_apb_pclk); + s3c_pwmclk_init(); } diff --git a/arch/arm/mach-exynos4/cpu.c b/arch/arm/mach-exynos4/cpu.c index a348434..5b1765b 100644 --- a/arch/arm/mach-exynos4/cpu.c +++ b/arch/arm/mach-exynos4/cpu.c @@ -28,6 +28,7 @@ #include <plat/fimc-core.h> #include <plat/iic-core.h> #include <plat/reset.h> +#include <plat/tv-core.h> #include <mach/regs-irq.h> #include <mach/regs-pmu.h> @@ -182,6 +183,7 @@ void __init exynos4_map_io(void) s3c_i2c2_setname("s3c2440-i2c"); s5p_fb_setname(0, "exynos4-fb"); + s5p_hdmi_setname("exynos4-hdmi"); } void __init exynos4_init_clocks(int xtal) diff --git a/arch/arm/mach-exynos4/dma.c b/arch/arm/mach-exynos4/dma.c index 564bb53..9667c61 100644 --- a/arch/arm/mach-exynos4/dma.c +++ b/arch/arm/mach-exynos4/dma.c @@ -21,151 +21,229 @@ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ -#include <linux/platform_device.h> #include <linux/dma-mapping.h> +#include <linux/amba/bus.h> +#include <linux/amba/pl330.h> +#include <asm/irq.h> #include <plat/devs.h> #include <plat/irqs.h> #include <mach/map.h> #include <mach/irqs.h> - -#include <plat/s3c-pl330-pdata.h> +#include <mach/dma.h> static u64 dma_dmamask = DMA_BIT_MASK(32); -static struct resource exynos4_pdma0_resource[] = { - [0] = { - .start = EXYNOS4_PA_PDMA0, - .end = EXYNOS4_PA_PDMA0 + SZ_4K, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_PDMA0, - .end = IRQ_PDMA0, - .flags = IORESOURCE_IRQ, +struct dma_pl330_peri pdma0_peri[28] = { + { + .peri_id = (u8)DMACH_PCM0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_PCM0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_PCM2_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_PCM2_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_MSM_REQ0, + }, { + .peri_id = (u8)DMACH_MSM_REQ2, + }, { + .peri_id = (u8)DMACH_SPI0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_SPI0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_SPI2_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_SPI2_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_I2S0S_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_I2S0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_I2S0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_UART0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_UART2_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART2_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_UART4_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART4_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_SLIMBUS0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_SLIMBUS0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_SLIMBUS2_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_SLIMBUS2_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_SLIMBUS4_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_SLIMBUS4_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_AC97_MICIN, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_AC97_PCMIN, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_AC97_PCMOUT, + .rqtype = MEMTODEV, }, }; -static struct s3c_pl330_platdata exynos4_pdma0_pdata = { - .peri = { - [0] = DMACH_PCM0_RX, - [1] = DMACH_PCM0_TX, - [2] = DMACH_PCM2_RX, - [3] = DMACH_PCM2_TX, - [4] = DMACH_MSM_REQ0, - [5] = DMACH_MSM_REQ2, - [6] = DMACH_SPI0_RX, - [7] = DMACH_SPI0_TX, - [8] = DMACH_SPI2_RX, - [9] = DMACH_SPI2_TX, - [10] = DMACH_I2S0S_TX, - [11] = DMACH_I2S0_RX, - [12] = DMACH_I2S0_TX, - [13] = DMACH_I2S2_RX, - [14] = DMACH_I2S2_TX, - [15] = DMACH_UART0_RX, - [16] = DMACH_UART0_TX, - [17] = DMACH_UART2_RX, - [18] = DMACH_UART2_TX, - [19] = DMACH_UART4_RX, - [20] = DMACH_UART4_TX, - [21] = DMACH_SLIMBUS0_RX, - [22] = DMACH_SLIMBUS0_TX, - [23] = DMACH_SLIMBUS2_RX, - [24] = DMACH_SLIMBUS2_TX, - [25] = DMACH_SLIMBUS4_RX, - [26] = DMACH_SLIMBUS4_TX, - [27] = DMACH_AC97_MICIN, - [28] = DMACH_AC97_PCMIN, - [29] = DMACH_AC97_PCMOUT, - [30] = DMACH_MAX, - [31] = DMACH_MAX, - }, +struct dma_pl330_platdata exynos4_pdma0_pdata = { + .nr_valid_peri = ARRAY_SIZE(pdma0_peri), + .peri = pdma0_peri, }; -static struct platform_device exynos4_device_pdma0 = { - .name = "s3c-pl330", - .id = 0, - .num_resources = ARRAY_SIZE(exynos4_pdma0_resource), - .resource = exynos4_pdma0_resource, - .dev = { +struct amba_device exynos4_device_pdma0 = { + .dev = { + .init_name = "dma-pl330.0", .dma_mask = &dma_dmamask, .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = &exynos4_pdma0_pdata, }, + .res = { + .start = EXYNOS4_PA_PDMA0, + .end = EXYNOS4_PA_PDMA0 + SZ_4K, + .flags = IORESOURCE_MEM, + }, + .irq = {IRQ_PDMA0, NO_IRQ}, + .periphid = 0x00041330, }; -static struct resource exynos4_pdma1_resource[] = { - [0] = { - .start = EXYNOS4_PA_PDMA1, - .end = EXYNOS4_PA_PDMA1 + SZ_4K, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_PDMA1, - .end = IRQ_PDMA1, - .flags = IORESOURCE_IRQ, +struct dma_pl330_peri pdma1_peri[25] = { + { + .peri_id = (u8)DMACH_PCM0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_PCM0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_PCM1_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_PCM1_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_MSM_REQ1, + }, { + .peri_id = (u8)DMACH_MSM_REQ3, + }, { + .peri_id = (u8)DMACH_SPI1_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_SPI1_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_I2S0S_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_I2S0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_I2S0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_I2S1_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_I2S1_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_UART0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_UART1_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART1_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_UART3_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART3_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_SLIMBUS1_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_SLIMBUS1_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_SLIMBUS3_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_SLIMBUS3_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_SLIMBUS5_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_SLIMBUS5_TX, + .rqtype = MEMTODEV, }, }; -static struct s3c_pl330_platdata exynos4_pdma1_pdata = { - .peri = { - [0] = DMACH_PCM0_RX, - [1] = DMACH_PCM0_TX, - [2] = DMACH_PCM1_RX, - [3] = DMACH_PCM1_TX, - [4] = DMACH_MSM_REQ1, - [5] = DMACH_MSM_REQ3, - [6] = DMACH_SPI1_RX, - [7] = DMACH_SPI1_TX, - [8] = DMACH_I2S0S_TX, - [9] = DMACH_I2S0_RX, - [10] = DMACH_I2S0_TX, - [11] = DMACH_I2S1_RX, - [12] = DMACH_I2S1_TX, - [13] = DMACH_UART0_RX, - [14] = DMACH_UART0_TX, - [15] = DMACH_UART1_RX, - [16] = DMACH_UART1_TX, - [17] = DMACH_UART3_RX, - [18] = DMACH_UART3_TX, - [19] = DMACH_SLIMBUS1_RX, - [20] = DMACH_SLIMBUS1_TX, - [21] = DMACH_SLIMBUS3_RX, - [22] = DMACH_SLIMBUS3_TX, - [23] = DMACH_SLIMBUS5_RX, - [24] = DMACH_SLIMBUS5_TX, - [25] = DMACH_SLIMBUS0AUX_RX, - [26] = DMACH_SLIMBUS0AUX_TX, - [27] = DMACH_SPDIF, - [28] = DMACH_MAX, - [29] = DMACH_MAX, - [30] = DMACH_MAX, - [31] = DMACH_MAX, - }, +struct dma_pl330_platdata exynos4_pdma1_pdata = { + .nr_valid_peri = ARRAY_SIZE(pdma1_peri), + .peri = pdma1_peri, }; -static struct platform_device exynos4_device_pdma1 = { - .name = "s3c-pl330", - .id = 1, - .num_resources = ARRAY_SIZE(exynos4_pdma1_resource), - .resource = exynos4_pdma1_resource, - .dev = { +struct amba_device exynos4_device_pdma1 = { + .dev = { + .init_name = "dma-pl330.1", .dma_mask = &dma_dmamask, .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = &exynos4_pdma1_pdata, }, -}; - -static struct platform_device *exynos4_dmacs[] __initdata = { - &exynos4_device_pdma0, - &exynos4_device_pdma1, + .res = { + .start = EXYNOS4_PA_PDMA1, + .end = EXYNOS4_PA_PDMA1 + SZ_4K, + .flags = IORESOURCE_MEM, + }, + .irq = {IRQ_PDMA1, NO_IRQ}, + .periphid = 0x00041330, }; static int __init exynos4_dma_init(void) { - platform_add_devices(exynos4_dmacs, ARRAY_SIZE(exynos4_dmacs)); + amba_device_register(&exynos4_device_pdma0, &iomem_resource); + amba_device_register(&exynos4_device_pdma1, &iomem_resource); return 0; } diff --git a/arch/arm/mach-exynos4/include/mach/clkdev.h b/arch/arm/mach-exynos4/include/mach/clkdev.h deleted file mode 100644 index 7dffa83..0000000 --- a/arch/arm/mach-exynos4/include/mach/clkdev.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef __MACH_CLKDEV_H__ -#define __MACH_CLKDEV_H__ - -#define __clk_get(clk) ({ 1; }) -#define __clk_put(clk) do {} while (0) - -#endif diff --git a/arch/arm/mach-exynos4/include/mach/dma.h b/arch/arm/mach-exynos4/include/mach/dma.h index 81209eb..201842a 100644 --- a/arch/arm/mach-exynos4/include/mach/dma.h +++ b/arch/arm/mach-exynos4/include/mach/dma.h @@ -20,7 +20,7 @@ #ifndef __MACH_DMA_H #define __MACH_DMA_H -/* This platform uses the common S3C DMA API driver for PL330 */ -#include <plat/s3c-dma-pl330.h> +/* This platform uses the common DMA API driver for PL330 */ +#include <plat/dma-pl330.h> #endif /* __MACH_DMA_H */ diff --git a/arch/arm/mach-exynos4/include/mach/i2c-hdmiphy.h b/arch/arm/mach-exynos4/include/mach/i2c-hdmiphy.h new file mode 100644 index 0000000..9dbe317 --- /dev/null +++ b/arch/arm/mach-exynos4/include/mach/i2c-hdmiphy.h @@ -0,0 +1,16 @@ +/* + * Copyright (C) 2011 Samsung Electronics Co., Ltd. + * + * S5P series i2c hdmiphy helper definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef PLAT_S5P_I2C_HDMIPHY_H_ +#define PLAT_S5P_I2C_HDMIPHY_H_ + +#define S5P_I2C_HDMIPHY_BUS_NUM (8) + +#endif diff --git a/arch/arm/mach-exynos4/include/mach/irqs.h b/arch/arm/mach-exynos4/include/mach/irqs.h index 2d3f6bc..dfd4b7e 100644 --- a/arch/arm/mach-exynos4/include/mach/irqs.h +++ b/arch/arm/mach-exynos4/include/mach/irqs.h @@ -95,7 +95,11 @@ #define IRQ_2D IRQ_SPI(89) #define IRQ_PCIE IRQ_SPI(90) +#define IRQ_MIXER IRQ_SPI(91) +#define IRQ_HDMI IRQ_SPI(92) +#define IRQ_IIC_HDMIPHY IRQ_SPI(93) #define IRQ_MFC IRQ_SPI(94) +#define IRQ_SDO IRQ_SPI(95) #define IRQ_AUDIO_SS IRQ_SPI(96) #define IRQ_I2S0 IRQ_SPI(97) diff --git a/arch/arm/mach-exynos4/include/mach/map.h b/arch/arm/mach-exynos4/include/mach/map.h index 9f97eb8..918a979 100644 --- a/arch/arm/mach-exynos4/include/mach/map.h +++ b/arch/arm/mach-exynos4/include/mach/map.h @@ -112,6 +112,12 @@ #define EXYNOS4_PA_UART 0x13800000 +#define EXYNOS4_PA_VP 0x12C00000 +#define EXYNOS4_PA_MIXER 0x12C10000 +#define EXYNOS4_PA_SDO 0x12C20000 +#define EXYNOS4_PA_HDMI 0x12D00000 +#define EXYNOS4_PA_IIC_HDMIPHY 0x138E0000 + #define EXYNOS4_PA_IIC(x) (0x13860000 + ((x) * 0x10000)) #define EXYNOS4_PA_ADC 0x13910000 @@ -161,6 +167,12 @@ #define S5P_PA_TIMER EXYNOS4_PA_TIMER #define S5P_PA_EHCI EXYNOS4_PA_EHCI +#define S5P_PA_SDO EXYNOS4_PA_SDO +#define S5P_PA_VP EXYNOS4_PA_VP +#define S5P_PA_MIXER EXYNOS4_PA_MIXER +#define S5P_PA_HDMI EXYNOS4_PA_HDMI +#define S5P_PA_IIC_HDMIPHY EXYNOS4_PA_IIC_HDMIPHY + #define SAMSUNG_PA_KEYPAD EXYNOS4_PA_KEYPAD /* UART */ diff --git a/arch/arm/mach-exynos4/include/mach/pm-core.h b/arch/arm/mach-exynos4/include/mach/pm-core.h index 1df3b81..9d8da51e3 100644 --- a/arch/arm/mach-exynos4/include/mach/pm-core.h +++ b/arch/arm/mach-exynos4/include/mach/pm-core.h @@ -14,6 +14,10 @@ * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ + +#ifndef __ASM_ARCH_PM_CORE_H +#define __ASM_ARCH_PM_CORE_H __FILE__ + #include <mach/regs-pmu.h> static inline void s3c_pm_debug_init_uart(void) @@ -53,7 +57,9 @@ static inline void s3c_pm_restored_gpios(void) /* nothing here yet */ } -static inline void s3c_pm_saved_gpios(void) +static inline void samsung_pm_saved_gpios(void) { /* nothing here yet */ } + +#endif /* __ASM_ARCH_PM_CORE_H */ diff --git a/arch/arm/mach-exynos4/include/mach/pmu.h b/arch/arm/mach-exynos4/include/mach/pmu.h index a952904..632dd56 100644 --- a/arch/arm/mach-exynos4/include/mach/pmu.h +++ b/arch/arm/mach-exynos4/include/mach/pmu.h @@ -13,6 +13,8 @@ #ifndef __ASM_ARCH_PMU_H #define __ASM_ARCH_PMU_H __FILE__ +#define PMU_TABLE_END NULL + enum sys_powerdown { SYS_AFTR, SYS_LPA, @@ -20,6 +22,11 @@ enum sys_powerdown { NUM_SYS_POWERDOWN, }; +struct exynos4_pmu_conf { + void __iomem *reg; + unsigned int val[NUM_SYS_POWERDOWN]; +}; + extern void exynos4_sys_powerdown_conf(enum sys_powerdown mode); #endif /* __ASM_ARCH_PMU_H */ diff --git a/arch/arm/mach-exynos4/include/mach/regs-pmu.h b/arch/arm/mach-exynos4/include/mach/regs-pmu.h index cdf9b47..4fff8e9 100644 --- a/arch/arm/mach-exynos4/include/mach/regs-pmu.h +++ b/arch/arm/mach-exynos4/include/mach/regs-pmu.h @@ -25,9 +25,10 @@ #define S5P_USE_STANDBY_WFI0 (1 << 16) #define S5P_USE_STANDBY_WFI1 (1 << 17) +#define S5P_USE_STANDBYWFI_ISP_ARM (1 << 18) #define S5P_USE_STANDBY_WFE0 (1 << 24) #define S5P_USE_STANDBY_WFE1 (1 << 25) -#define S5P_USE_MASK ((0x3 << 16) | (0x3 << 24)) +#define S5P_USE_STANDBYWFE_ISP_ARM (1 << 26) #define S5P_SWRESET S5P_PMUREG(0x0400) @@ -35,15 +36,17 @@ #define S5P_EINT_WAKEUP_MASK S5P_PMUREG(0x0604) #define S5P_WAKEUP_MASK S5P_PMUREG(0x0608) -#define S5P_USBHOST_PHY_CONTROL S5P_PMUREG(0x0708) -#define S5P_USBHOST_PHY_ENABLE (1 << 0) +#define S5P_HDMI_PHY_CONTROL S5P_PMUREG(0x0700) +#define S5P_HDMI_PHY_ENABLE (1 << 0) + +#define S5P_DAC_PHY_CONTROL S5P_PMUREG(0x070C) +#define S5P_DAC_PHY_ENABLE (1 << 0) #define S5P_MIPI_DPHY_CONTROL(n) S5P_PMUREG(0x0710 + (n) * 4) #define S5P_MIPI_DPHY_ENABLE (1 << 0) #define S5P_MIPI_DPHY_SRESETN (1 << 1) #define S5P_MIPI_DPHY_MRESETN (1 << 2) -#define S5P_PMU_SATA_PHY_CONTROL S5P_PMUREG(0x0720) #define S5P_INFORM0 S5P_PMUREG(0x0800) #define S5P_INFORM1 S5P_PMUREG(0x0804) #define S5P_INFORM2 S5P_PMUREG(0x0808) @@ -76,7 +79,6 @@ #define S5P_CMU_CLKSTOP_MFC_LOWPWR S5P_PMUREG(0x1148) #define S5P_CMU_CLKSTOP_G3D_LOWPWR S5P_PMUREG(0x114C) #define S5P_CMU_CLKSTOP_LCD0_LOWPWR S5P_PMUREG(0x1150) -#define S5P_CMU_CLKSTOP_LCD1_LOWPWR S5P_PMUREG(0x1154) #define S5P_CMU_CLKSTOP_MAUDIO_LOWPWR S5P_PMUREG(0x1158) #define S5P_CMU_CLKSTOP_GPS_LOWPWR S5P_PMUREG(0x115C) #define S5P_CMU_RESET_CAM_LOWPWR S5P_PMUREG(0x1160) @@ -84,7 +86,6 @@ #define S5P_CMU_RESET_MFC_LOWPWR S5P_PMUREG(0x1168) #define S5P_CMU_RESET_G3D_LOWPWR S5P_PMUREG(0x116C) #define S5P_CMU_RESET_LCD0_LOWPWR S5P_PMUREG(0x1170) -#define S5P_CMU_RESET_LCD1_LOWPWR S5P_PMUREG(0x1174) #define S5P_CMU_RESET_MAUDIO_LOWPWR S5P_PMUREG(0x1178) #define S5P_CMU_RESET_GPS_LOWPWR S5P_PMUREG(0x117C) #define S5P_TOP_BUS_LOWPWR S5P_PMUREG(0x1180) @@ -92,14 +93,11 @@ #define S5P_TOP_PWR_LOWPWR S5P_PMUREG(0x1188) #define S5P_LOGIC_RESET_LOWPWR S5P_PMUREG(0x11A0) #define S5P_ONENAND_MEM_LOWPWR S5P_PMUREG(0x11C0) -#define S5P_MODIMIF_MEM_LOWPWR S5P_PMUREG(0x11C4) #define S5P_G2D_ACP_MEM_LOWPWR S5P_PMUREG(0x11C8) #define S5P_USBOTG_MEM_LOWPWR S5P_PMUREG(0x11CC) #define S5P_HSMMC_MEM_LOWPWR S5P_PMUREG(0x11D0) #define S5P_CSSYS_MEM_LOWPWR S5P_PMUREG(0x11D4) #define S5P_SECSS_MEM_LOWPWR S5P_PMUREG(0x11D8) -#define S5P_PCIE_MEM_LOWPWR S5P_PMUREG(0x11E0) -#define S5P_SATA_MEM_LOWPWR S5P_PMUREG(0x11E4) #define S5P_PAD_RETENTION_DRAM_LOWPWR S5P_PMUREG(0x1200) #define S5P_PAD_RETENTION_MAUDIO_LOWPWR S5P_PMUREG(0x1204) #define S5P_PAD_RETENTION_GPIO_LOWPWR S5P_PMUREG(0x1220) @@ -120,7 +118,6 @@ #define S5P_MFC_LOWPWR S5P_PMUREG(0x1388) #define S5P_G3D_LOWPWR S5P_PMUREG(0x138C) #define S5P_LCD0_LOWPWR S5P_PMUREG(0x1390) -#define S5P_LCD1_LOWPWR S5P_PMUREG(0x1394) #define S5P_MAUDIO_LOWPWR S5P_PMUREG(0x1398) #define S5P_GPS_LOWPWR S5P_PMUREG(0x139C) #define S5P_GPS_ALIVE_LOWPWR S5P_PMUREG(0x13A0) @@ -156,7 +153,6 @@ #define S5P_PMU_MFC_CONF S5P_PMUREG(0x3C40) #define S5P_PMU_G3D_CONF S5P_PMUREG(0x3C60) #define S5P_PMU_LCD0_CONF S5P_PMUREG(0x3C80) -#define S5P_PMU_LCD1_CONF S5P_PMUREG(0x3CA0) #define S5P_PMU_GPS_CONF S5P_PMUREG(0x3CE0) #define S5P_PMU_SATA_PHY_CONTROL_EN 0x1 @@ -165,4 +161,60 @@ #define S5P_CHECK_SLEEP 0x00000BAD +/* Only for EXYNOS4210 */ +#define S5P_USBHOST_PHY_CONTROL S5P_PMUREG(0x0708) +#define S5P_USBHOST_PHY_ENABLE (1 << 0) + +#define S5P_PMU_SATA_PHY_CONTROL S5P_PMUREG(0x0720) + +#define S5P_CMU_CLKSTOP_LCD1_LOWPWR S5P_PMUREG(0x1154) +#define S5P_CMU_RESET_LCD1_LOWPWR S5P_PMUREG(0x1174) +#define S5P_MODIMIF_MEM_LOWPWR S5P_PMUREG(0x11C4) +#define S5P_PCIE_MEM_LOWPWR S5P_PMUREG(0x11E0) +#define S5P_SATA_MEM_LOWPWR S5P_PMUREG(0x11E4) +#define S5P_LCD1_LOWPWR S5P_PMUREG(0x1394) + +#define S5P_PMU_LCD1_CONF S5P_PMUREG(0x3CA0) + +/* Only for EXYNOS4212 */ +#define S5P_ISP_ARM_LOWPWR S5P_PMUREG(0x1050) +#define S5P_DIS_IRQ_ISP_ARM_LOCAL_LOWPWR S5P_PMUREG(0x1054) +#define S5P_DIS_IRQ_ISP_ARM_CENTRAL_LOWPWR S5P_PMUREG(0x1058) +#define S5P_CMU_ACLKSTOP_COREBLK_LOWPWR S5P_PMUREG(0x1110) +#define S5P_CMU_SCLKSTOP_COREBLK_LOWPWR S5P_PMUREG(0x1114) +#define S5P_CMU_RESET_COREBLK_LOWPWR S5P_PMUREG(0x111C) +#define S5P_MPLLUSER_SYSCLK_LOWPWR S5P_PMUREG(0x1130) +#define S5P_CMU_CLKSTOP_ISP_LOWPWR S5P_PMUREG(0x1154) +#define S5P_CMU_RESET_ISP_LOWPWR S5P_PMUREG(0x1174) +#define S5P_TOP_BUS_COREBLK_LOWPWR S5P_PMUREG(0x1190) +#define S5P_TOP_RETENTION_COREBLK_LOWPWR S5P_PMUREG(0x1194) +#define S5P_TOP_PWR_COREBLK_LOWPWR S5P_PMUREG(0x1198) +#define S5P_OSCCLK_GATE_LOWPWR S5P_PMUREG(0x11A4) +#define S5P_LOGIC_RESET_COREBLK_LOWPWR S5P_PMUREG(0x11B0) +#define S5P_OSCCLK_GATE_COREBLK_LOWPWR S5P_PMUREG(0x11B4) +#define S5P_HSI_MEM_LOWPWR S5P_PMUREG(0x11C4) +#define S5P_ROTATOR_MEM_LOWPWR S5P_PMUREG(0x11DC) +#define S5P_PAD_RETENTION_GPIO_COREBLK_LOWPWR S5P_PMUREG(0x123C) +#define S5P_PAD_ISOLATION_COREBLK_LOWPWR S5P_PMUREG(0x1250) +#define S5P_GPIO_MODE_COREBLK_LOWPWR S5P_PMUREG(0x1320) +#define S5P_TOP_ASB_RESET_LOWPWR S5P_PMUREG(0x1344) +#define S5P_TOP_ASB_ISOLATION_LOWPWR S5P_PMUREG(0x1348) +#define S5P_ISP_LOWPWR S5P_PMUREG(0x1394) +#define S5P_DRAM_FREQ_DOWN_LOWPWR S5P_PMUREG(0x13B0) +#define S5P_DDRPHY_DLLOFF_LOWPWR S5P_PMUREG(0x13B4) +#define S5P_CMU_SYSCLK_ISP_LOWPWR S5P_PMUREG(0x13B8) +#define S5P_CMU_SYSCLK_GPS_LOWPWR S5P_PMUREG(0x13BC) +#define S5P_LPDDR_PHY_DLL_LOCK_LOWPWR S5P_PMUREG(0x13C0) + +#define S5P_ARM_L2_0_OPTION S5P_PMUREG(0x2608) +#define S5P_ARM_L2_1_OPTION S5P_PMUREG(0x2628) +#define S5P_ONENAND_MEM_OPTION S5P_PMUREG(0x2E08) +#define S5P_HSI_MEM_OPTION S5P_PMUREG(0x2E28) +#define S5P_G2D_ACP_MEM_OPTION S5P_PMUREG(0x2E48) +#define S5P_USBOTG_MEM_OPTION S5P_PMUREG(0x2E68) +#define S5P_HSMMC_MEM_OPTION S5P_PMUREG(0x2E88) +#define S5P_CSSYS_MEM_OPTION S5P_PMUREG(0x2EA8) +#define S5P_SECSS_MEM_OPTION S5P_PMUREG(0x2EC8) +#define S5P_ROTATOR_MEM_OPTION S5P_PMUREG(0x2F48) + #endif /* __ASM_ARCH_REGS_PMU_H */ diff --git a/arch/arm/mach-exynos4/mach-nuri.c b/arch/arm/mach-exynos4/mach-nuri.c index 43be71b..bbd13f4 100644 --- a/arch/arm/mach-exynos4/mach-nuri.c +++ b/arch/arm/mach-exynos4/mach-nuri.c @@ -32,10 +32,12 @@ #include <asm/mach-types.h> #include <plat/adc.h> +#include <plat/regs-fb-v4.h> #include <plat/regs-serial.h> #include <plat/exynos4.h> #include <plat/cpu.h> #include <plat/devs.h> +#include <plat/fb.h> #include <plat/sdhci.h> #include <plat/ehci.h> #include <plat/clock.h> @@ -199,6 +201,33 @@ static struct platform_device nuri_gpio_keys = { }, }; +/* Frame Buffer */ +static struct s3c_fb_pd_win nuri_fb_win0 = { + .win_mode = { + .left_margin = 64, + .right_margin = 16, + .upper_margin = 64, + .lower_margin = 1, + .hsync_len = 48, + .vsync_len = 3, + .xres = 1280, + .yres = 800, + .refresh = 60, + }, + .max_bpp = 24, + .default_bpp = 16, + .virtual_x = 1280, + .virtual_y = 800, +}; + +static struct s3c_fb_platdata nuri_fb_pdata __initdata = { + .win[0] = &nuri_fb_win0, + .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB | + VIDCON0_CLKSEL_LCD, + .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, + .setup_gpio = exynos4_fimd0_gpio_setup_24bpp, +}; + static void nuri_lcd_power_on(struct plat_lcd_data *pd, unsigned int power) { int gpio = EXYNOS4_GPE1(5); @@ -1092,6 +1121,7 @@ static struct platform_device *nuri_devices[] __initdata = { /* Samsung Platform Devices */ &s3c_device_i2c5, /* PMIC should initialize first */ &emmc_fixed_voltage, + &s5p_device_fimd0, &s3c_device_hsmmc0, &s3c_device_hsmmc2, &s3c_device_hsmmc3, @@ -1106,6 +1136,7 @@ static struct platform_device *nuri_devices[] __initdata = { &s5p_device_mfc_l, &s5p_device_mfc_r, &exynos4_device_pd[PD_MFC], + &exynos4_device_pd[PD_LCD0], /* NURI Devices */ &nuri_gpio_keys, @@ -1142,12 +1173,15 @@ static void __init nuri_machine_init(void) i2c9_devs[I2C9_MAX17042].irq = gpio_to_irq(EXYNOS4_GPX2(3)); i2c_register_board_info(9, i2c9_devs, ARRAY_SIZE(i2c9_devs)); + s5p_fimd0_set_platdata(&nuri_fb_pdata); + nuri_ehci_init(); clk_xusbxti.rate = 24000000; /* Last */ platform_add_devices(nuri_devices, ARRAY_SIZE(nuri_devices)); s5p_device_mfc.dev.parent = &exynos4_device_pd[PD_MFC].dev; + s5p_device_fimd0.dev.parent = &exynos4_device_pd[PD_LCD0].dev; } MACHINE_START(NURI, "NURI") diff --git a/arch/arm/mach-exynos4/mach-origen.c b/arch/arm/mach-exynos4/mach-origen.c index b5f6f38..71db848 100644 --- a/arch/arm/mach-exynos4/mach-origen.c +++ b/arch/arm/mach-exynos4/mach-origen.c @@ -14,16 +14,31 @@ #include <linux/platform_device.h> #include <linux/io.h> #include <linux/input.h> +#include <linux/pwm_backlight.h> +#include <linux/gpio_keys.h> +#include <linux/i2c.h> +#include <linux/regulator/machine.h> +#include <linux/mfd/max8997.h> +#include <linux/lcd.h> #include <asm/mach/arch.h> #include <asm/mach-types.h> +#include <video/platform_lcd.h> + #include <plat/regs-serial.h> +#include <plat/regs-fb-v4.h> #include <plat/exynos4.h> #include <plat/cpu.h> #include <plat/devs.h> #include <plat/sdhci.h> #include <plat/iic.h> +#include <plat/ehci.h> +#include <plat/clock.h> +#include <plat/gpio-cfg.h> +#include <plat/backlight.h> +#include <plat/pd.h> +#include <plat/fb.h> #include <mach/map.h> @@ -72,19 +87,543 @@ static struct s3c2410_uartcfg origen_uartcfgs[] __initdata = { }, }; +static struct regulator_consumer_supply __initdata ldo3_consumer[] = { + REGULATOR_SUPPLY("vdd11", "s5p-mipi-csis.0"), /* MIPI */ +}; +static struct regulator_consumer_supply __initdata ldo6_consumer[] = { + REGULATOR_SUPPLY("vdd18", "s5p-mipi-csis.0"), /* MIPI */ +}; +static struct regulator_consumer_supply __initdata ldo7_consumer[] = { + REGULATOR_SUPPLY("avdd", "alc5625"), /* Realtek ALC5625 */ +}; +static struct regulator_consumer_supply __initdata ldo8_consumer[] = { + REGULATOR_SUPPLY("vdd", "s5p-adc"), /* ADC */ +}; +static struct regulator_consumer_supply __initdata ldo9_consumer[] = { + REGULATOR_SUPPLY("dvdd", "swb-a31"), /* AR6003 WLAN & CSR 8810 BT */ +}; +static struct regulator_consumer_supply __initdata ldo11_consumer[] = { + REGULATOR_SUPPLY("dvdd", "alc5625"), /* Realtek ALC5625 */ +}; +static struct regulator_consumer_supply __initdata ldo14_consumer[] = { + REGULATOR_SUPPLY("avdd18", "swb-a31"), /* AR6003 WLAN & CSR 8810 BT */ +}; +static struct regulator_consumer_supply __initdata ldo17_consumer[] = { + REGULATOR_SUPPLY("vdd33", "swb-a31"), /* AR6003 WLAN & CSR 8810 BT */ +}; +static struct regulator_consumer_supply __initdata buck1_consumer[] = { + REGULATOR_SUPPLY("vdd_arm", NULL), /* CPUFREQ */ +}; +static struct regulator_consumer_supply __initdata buck2_consumer[] = { + REGULATOR_SUPPLY("vdd_int", NULL), /* CPUFREQ */ +}; +static struct regulator_consumer_supply __initdata buck3_consumer[] = { + REGULATOR_SUPPLY("vdd_g3d", "mali_drm"), /* G3D */ +}; +static struct regulator_consumer_supply __initdata buck7_consumer[] = { + REGULATOR_SUPPLY("vcc", "platform-lcd"), /* LCD */ +}; + +static struct regulator_init_data __initdata max8997_ldo1_data = { + .constraints = { + .name = "VDD_ABB_3.3V", + .min_uV = 3300000, + .max_uV = 3300000, + .apply_uV = 1, + .state_mem = { + .disabled = 1, + }, + }, +}; + +static struct regulator_init_data __initdata max8997_ldo2_data = { + .constraints = { + .name = "VDD_ALIVE_1.1V", + .min_uV = 1100000, + .max_uV = 1100000, + .apply_uV = 1, + .always_on = 1, + .state_mem = { + .enabled = 1, + }, + }, +}; + +static struct regulator_init_data __initdata max8997_ldo3_data = { + .constraints = { + .name = "VMIPI_1.1V", + .min_uV = 1100000, + .max_uV = 1100000, + .apply_uV = 1, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(ldo3_consumer), + .consumer_supplies = ldo3_consumer, +}; + +static struct regulator_init_data __initdata max8997_ldo4_data = { + .constraints = { + .name = "VDD_RTC_1.8V", + .min_uV = 1800000, + .max_uV = 1800000, + .apply_uV = 1, + .always_on = 1, + .state_mem = { + .disabled = 1, + }, + }, +}; + +static struct regulator_init_data __initdata max8997_ldo6_data = { + .constraints = { + .name = "VMIPI_1.8V", + .min_uV = 1800000, + .max_uV = 1800000, + .apply_uV = 1, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(ldo6_consumer), + .consumer_supplies = ldo6_consumer, +}; + +static struct regulator_init_data __initdata max8997_ldo7_data = { + .constraints = { + .name = "VDD_AUD_1.8V", + .min_uV = 1800000, + .max_uV = 1800000, + .apply_uV = 1, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(ldo7_consumer), + .consumer_supplies = ldo7_consumer, +}; + +static struct regulator_init_data __initdata max8997_ldo8_data = { + .constraints = { + .name = "VADC_3.3V", + .min_uV = 3300000, + .max_uV = 3300000, + .apply_uV = 1, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(ldo8_consumer), + .consumer_supplies = ldo8_consumer, +}; + +static struct regulator_init_data __initdata max8997_ldo9_data = { + .constraints = { + .name = "DVDD_SWB_2.8V", + .min_uV = 2800000, + .max_uV = 2800000, + .apply_uV = 1, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(ldo9_consumer), + .consumer_supplies = ldo9_consumer, +}; + +static struct regulator_init_data __initdata max8997_ldo10_data = { + .constraints = { + .name = "VDD_PLL_1.1V", + .min_uV = 1100000, + .max_uV = 1100000, + .apply_uV = 1, + .always_on = 1, + .state_mem = { + .disabled = 1, + }, + }, +}; + +static struct regulator_init_data __initdata max8997_ldo11_data = { + .constraints = { + .name = "VDD_AUD_3V", + .min_uV = 3000000, + .max_uV = 3000000, + .apply_uV = 1, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(ldo11_consumer), + .consumer_supplies = ldo11_consumer, +}; + +static struct regulator_init_data __initdata max8997_ldo14_data = { + .constraints = { + .name = "AVDD18_SWB_1.8V", + .min_uV = 1800000, + .max_uV = 1800000, + .apply_uV = 1, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(ldo14_consumer), + .consumer_supplies = ldo14_consumer, +}; + +static struct regulator_init_data __initdata max8997_ldo17_data = { + .constraints = { + .name = "VDD_SWB_3.3V", + .min_uV = 3300000, + .max_uV = 3300000, + .apply_uV = 1, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(ldo17_consumer), + .consumer_supplies = ldo17_consumer, +}; + +static struct regulator_init_data __initdata max8997_ldo21_data = { + .constraints = { + .name = "VDD_MIF_1.2V", + .min_uV = 1200000, + .max_uV = 1200000, + .apply_uV = 1, + .always_on = 1, + .state_mem = { + .disabled = 1, + }, + }, +}; + +static struct regulator_init_data __initdata max8997_buck1_data = { + .constraints = { + .name = "VDD_ARM_1.2V", + .min_uV = 950000, + .max_uV = 1350000, + .always_on = 1, + .boot_on = 1, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(buck1_consumer), + .consumer_supplies = buck1_consumer, +}; + +static struct regulator_init_data __initdata max8997_buck2_data = { + .constraints = { + .name = "VDD_INT_1.1V", + .min_uV = 900000, + .max_uV = 1100000, + .always_on = 1, + .boot_on = 1, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(buck2_consumer), + .consumer_supplies = buck2_consumer, +}; + +static struct regulator_init_data __initdata max8997_buck3_data = { + .constraints = { + .name = "VDD_G3D_1.1V", + .min_uV = 900000, + .max_uV = 1100000, + .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE | + REGULATOR_CHANGE_STATUS, + .state_mem = { + .disabled = 1, + }, + }, + .num_consumer_supplies = ARRAY_SIZE(buck3_consumer), + .consumer_supplies = buck3_consumer, +}; + +static struct regulator_init_data __initdata max8997_buck5_data = { + .constraints = { + .name = "VDDQ_M1M2_1.2V", + .min_uV = 1200000, + .max_uV = 1200000, + .apply_uV = 1, + .always_on = 1, + .state_mem = { + .disabled = 1, + }, + }, +}; + +static struct regulator_init_data __initdata max8997_buck7_data = { + .constraints = { + .name = "VDD_LCD_3.3V", + .min_uV = 3300000, + .max_uV = 3300000, + .boot_on = 1, + .apply_uV = 1, + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + .state_mem = { + .disabled = 1 + }, + }, + .num_consumer_supplies = ARRAY_SIZE(buck7_consumer), + .consumer_supplies = buck7_consumer, +}; + +static struct max8997_regulator_data __initdata origen_max8997_regulators[] = { + { MAX8997_LDO1, &max8997_ldo1_data }, + { MAX8997_LDO2, &max8997_ldo2_data }, + { MAX8997_LDO3, &max8997_ldo3_data }, + { MAX8997_LDO4, &max8997_ldo4_data }, + { MAX8997_LDO6, &max8997_ldo6_data }, + { MAX8997_LDO7, &max8997_ldo7_data }, + { MAX8997_LDO8, &max8997_ldo8_data }, + { MAX8997_LDO9, &max8997_ldo9_data }, + { MAX8997_LDO10, &max8997_ldo10_data }, + { MAX8997_LDO11, &max8997_ldo11_data }, + { MAX8997_LDO14, &max8997_ldo14_data }, + { MAX8997_LDO17, &max8997_ldo17_data }, + { MAX8997_LDO21, &max8997_ldo21_data }, + { MAX8997_BUCK1, &max8997_buck1_data }, + { MAX8997_BUCK2, &max8997_buck2_data }, + { MAX8997_BUCK3, &max8997_buck3_data }, + { MAX8997_BUCK5, &max8997_buck5_data }, + { MAX8997_BUCK7, &max8997_buck7_data }, +}; + +struct max8997_platform_data __initdata origen_max8997_pdata = { + .num_regulators = ARRAY_SIZE(origen_max8997_regulators), + .regulators = origen_max8997_regulators, + + .wakeup = true, + .buck1_gpiodvs = false, + .buck2_gpiodvs = false, + .buck5_gpiodvs = false, + .irq_base = IRQ_GPIO_END + 1, + + .ignore_gpiodvs_side_effect = true, + .buck125_default_idx = 0x0, + + .buck125_gpios[0] = EXYNOS4_GPX0(0), + .buck125_gpios[1] = EXYNOS4_GPX0(1), + .buck125_gpios[2] = EXYNOS4_GPX0(2), + + .buck1_voltage[0] = 1350000, + .buck1_voltage[1] = 1300000, + .buck1_voltage[2] = 1250000, + .buck1_voltage[3] = 1200000, + .buck1_voltage[4] = 1150000, + .buck1_voltage[5] = 1100000, + .buck1_voltage[6] = 1000000, + .buck1_voltage[7] = 950000, + + .buck2_voltage[0] = 1100000, + .buck2_voltage[1] = 1100000, + .buck2_voltage[2] = 1100000, + .buck2_voltage[3] = 1100000, + .buck2_voltage[4] = 1000000, + .buck2_voltage[5] = 1000000, + .buck2_voltage[6] = 1000000, + .buck2_voltage[7] = 1000000, + + .buck5_voltage[0] = 1200000, + .buck5_voltage[1] = 1200000, + .buck5_voltage[2] = 1200000, + .buck5_voltage[3] = 1200000, + .buck5_voltage[4] = 1200000, + .buck5_voltage[5] = 1200000, + .buck5_voltage[6] = 1200000, + .buck5_voltage[7] = 1200000, +}; + +/* I2C0 */ +static struct i2c_board_info i2c0_devs[] __initdata = { + { + I2C_BOARD_INFO("max8997", (0xCC >> 1)), + .platform_data = &origen_max8997_pdata, + .irq = IRQ_EINT(4), + }, +}; + +static struct s3c_sdhci_platdata origen_hsmmc0_pdata __initdata = { + .cd_type = S3C_SDHCI_CD_INTERNAL, + .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, +}; + static struct s3c_sdhci_platdata origen_hsmmc2_pdata __initdata = { - .cd_type = S3C_SDHCI_CD_GPIO, - .ext_cd_gpio = EXYNOS4_GPK2(2), - .ext_cd_gpio_invert = 1, + .cd_type = S3C_SDHCI_CD_INTERNAL, .clk_type = S3C_SDHCI_CLK_DIV_EXTERNAL, }; +/* USB EHCI */ +static struct s5p_ehci_platdata origen_ehci_pdata; + +static void __init origen_ehci_init(void) +{ + struct s5p_ehci_platdata *pdata = &origen_ehci_pdata; + + s5p_ehci_set_platdata(pdata); +} + +static struct gpio_keys_button origen_gpio_keys_table[] = { + { + .code = KEY_MENU, + .gpio = EXYNOS4_GPX1(5), + .desc = "gpio-keys: KEY_MENU", + .type = EV_KEY, + .active_low = 1, + .wakeup = 1, + .debounce_interval = 1, + }, { + .code = KEY_HOME, + .gpio = EXYNOS4_GPX1(6), + .desc = "gpio-keys: KEY_HOME", + .type = EV_KEY, + .active_low = 1, + .wakeup = 1, + .debounce_interval = 1, + }, { + .code = KEY_BACK, + .gpio = EXYNOS4_GPX1(7), + .desc = "gpio-keys: KEY_BACK", + .type = EV_KEY, + .active_low = 1, + .wakeup = 1, + .debounce_interval = 1, + }, { + .code = KEY_UP, + .gpio = EXYNOS4_GPX2(0), + .desc = "gpio-keys: KEY_UP", + .type = EV_KEY, + .active_low = 1, + .wakeup = 1, + .debounce_interval = 1, + }, { + .code = KEY_DOWN, + .gpio = EXYNOS4_GPX2(1), + .desc = "gpio-keys: KEY_DOWN", + .type = EV_KEY, + .active_low = 1, + .wakeup = 1, + .debounce_interval = 1, + }, +}; + +static struct gpio_keys_platform_data origen_gpio_keys_data = { + .buttons = origen_gpio_keys_table, + .nbuttons = ARRAY_SIZE(origen_gpio_keys_table), +}; + +static struct platform_device origen_device_gpiokeys = { + .name = "gpio-keys", + .dev = { + .platform_data = &origen_gpio_keys_data, + }, +}; + +static void lcd_hv070wsa_set_power(struct plat_lcd_data *pd, unsigned int power) +{ + int ret; + + if (power) + ret = gpio_request_one(EXYNOS4_GPE3(4), + GPIOF_OUT_INIT_HIGH, "GPE3_4"); + else + ret = gpio_request_one(EXYNOS4_GPE3(4), + GPIOF_OUT_INIT_LOW, "GPE3_4"); + + gpio_free(EXYNOS4_GPE3(4)); + + if (ret) + pr_err("failed to request gpio for LCD power: %d\n", ret); +} + +static struct plat_lcd_data origen_lcd_hv070wsa_data = { + .set_power = lcd_hv070wsa_set_power, +}; + +static struct platform_device origen_lcd_hv070wsa = { + .name = "platform-lcd", + .dev.parent = &s5p_device_fimd0.dev, + .dev.platform_data = &origen_lcd_hv070wsa_data, +}; + +static struct s3c_fb_pd_win origen_fb_win0 = { + .win_mode = { + .left_margin = 64, + .right_margin = 16, + .upper_margin = 64, + .lower_margin = 16, + .hsync_len = 48, + .vsync_len = 3, + .xres = 1024, + .yres = 600, + }, + .max_bpp = 32, + .default_bpp = 24, +}; + +static struct s3c_fb_platdata origen_lcd_pdata __initdata = { + .win[0] = &origen_fb_win0, + .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB, + .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, + .setup_gpio = exynos4_fimd0_gpio_setup_24bpp, +}; + static struct platform_device *origen_devices[] __initdata = { &s3c_device_hsmmc2, + &s3c_device_hsmmc0, + &s3c_device_i2c0, &s3c_device_rtc, &s3c_device_wdt, + &s5p_device_ehci, + &s5p_device_fimc0, + &s5p_device_fimc1, + &s5p_device_fimc2, + &s5p_device_fimc3, + &s5p_device_fimd0, + &s5p_device_hdmi, + &s5p_device_i2c_hdmiphy, + &s5p_device_mixer, + &exynos4_device_pd[PD_LCD0], + &exynos4_device_pd[PD_TV], + &origen_device_gpiokeys, + &origen_lcd_hv070wsa, +}; + +/* LCD Backlight data */ +static struct samsung_bl_gpio_info origen_bl_gpio_info = { + .no = EXYNOS4_GPD0(0), + .func = S3C_GPIO_SFN(2), }; +static struct platform_pwm_backlight_data origen_bl_data = { + .pwm_id = 0, + .pwm_period_ns = 1000, +}; + +static void s5p_tv_setup(void) +{ + /* Direct HPD to HDMI chip */ + gpio_request_one(EXYNOS4_GPX3(7), GPIOF_IN, "hpd-plug"); + s3c_gpio_cfgpin(EXYNOS4_GPX3(7), S3C_GPIO_SFN(0x3)); + s3c_gpio_setpull(EXYNOS4_GPX3(7), S3C_GPIO_PULL_NONE); +} + static void __init origen_map_io(void) { s5p_init_io(NULL, 0, S5P_VA_CHIPID); @@ -92,10 +631,42 @@ static void __init origen_map_io(void) s3c24xx_init_uarts(origen_uartcfgs, ARRAY_SIZE(origen_uartcfgs)); } +static void __init origen_power_init(void) +{ + gpio_request(EXYNOS4_GPX0(4), "PMIC_IRQ"); + s3c_gpio_cfgpin(EXYNOS4_GPX0(4), S3C_GPIO_SFN(0xf)); + s3c_gpio_setpull(EXYNOS4_GPX0(4), S3C_GPIO_PULL_NONE); +} + static void __init origen_machine_init(void) { + origen_power_init(); + + s3c_i2c0_set_platdata(NULL); + i2c_register_board_info(0, i2c0_devs, ARRAY_SIZE(i2c0_devs)); + + /* + * Since sdhci instance 2 can contain a bootable media, + * sdhci instance 0 is registered after instance 2. + */ s3c_sdhci2_set_platdata(&origen_hsmmc2_pdata); + s3c_sdhci0_set_platdata(&origen_hsmmc0_pdata); + + origen_ehci_init(); + clk_xusbxti.rate = 24000000; + + s5p_tv_setup(); + s5p_i2c_hdmiphy_set_platdata(NULL); + + s5p_fimd0_set_platdata(&origen_lcd_pdata); + platform_add_devices(origen_devices, ARRAY_SIZE(origen_devices)); + s5p_device_fimd0.dev.parent = &exynos4_device_pd[PD_LCD0].dev; + + s5p_device_hdmi.dev.parent = &exynos4_device_pd[PD_TV].dev; + s5p_device_mixer.dev.parent = &exynos4_device_pd[PD_TV].dev; + + samsung_bl_set(&origen_bl_gpio_info, &origen_bl_data); } MACHINE_START(ORIGEN, "ORIGEN") diff --git a/arch/arm/mach-exynos4/mach-smdkv310.c b/arch/arm/mach-exynos4/mach-smdkv310.c index 2c1a076..cec2afa 100644 --- a/arch/arm/mach-exynos4/mach-smdkv310.c +++ b/arch/arm/mach-exynos4/mach-smdkv310.c @@ -37,6 +37,9 @@ #include <plat/pd.h> #include <plat/gpio-cfg.h> #include <plat/backlight.h> +#include <plat/mfc.h> +#include <plat/ehci.h> +#include <plat/clock.h> #include <mach/map.h> @@ -232,17 +235,36 @@ static struct i2c_board_info i2c_devs1[] __initdata = { {I2C_BOARD_INFO("wm8994", 0x1a),}, }; +/* USB EHCI */ +static struct s5p_ehci_platdata smdkv310_ehci_pdata; + +static void __init smdkv310_ehci_init(void) +{ + struct s5p_ehci_platdata *pdata = &smdkv310_ehci_pdata; + + s5p_ehci_set_platdata(pdata); +} + static struct platform_device *smdkv310_devices[] __initdata = { &s3c_device_hsmmc0, &s3c_device_hsmmc1, &s3c_device_hsmmc2, &s3c_device_hsmmc3, &s3c_device_i2c1, + &s5p_device_i2c_hdmiphy, &s3c_device_rtc, &s3c_device_wdt, + &s5p_device_ehci, + &s5p_device_fimc0, + &s5p_device_fimc1, + &s5p_device_fimc2, + &s5p_device_fimc3, &exynos4_device_ac97, &exynos4_device_i2s0, &samsung_device_keypad, + &s5p_device_mfc, + &s5p_device_mfc_l, + &s5p_device_mfc_r, &exynos4_device_pd[PD_MFC], &exynos4_device_pd[PD_G3D], &exynos4_device_pd[PD_LCD0], @@ -258,6 +280,8 @@ static struct platform_device *smdkv310_devices[] __initdata = { &smdkv310_lcd_lte480wv, &smdkv310_smsc911x, &exynos4_device_ahci, + &s5p_device_hdmi, + &s5p_device_mixer, }; static void __init smdkv310_smsc911x_init(void) @@ -294,6 +318,18 @@ static struct platform_pwm_backlight_data smdkv310_bl_data = { .pwm_period_ns = 1000, }; +static void s5p_tv_setup(void) +{ + /* direct HPD to HDMI chip */ + WARN_ON(gpio_request_one(EXYNOS4_GPX3(7), GPIOF_IN, "hpd-plug")); + s3c_gpio_cfgpin(EXYNOS4_GPX3(7), S3C_GPIO_SFN(0x3)); + s3c_gpio_setpull(EXYNOS4_GPX3(7), S3C_GPIO_PULL_NONE); + + /* setup dependencies between TV devices */ + s5p_device_hdmi.dev.parent = &exynos4_device_pd[PD_TV].dev; + s5p_device_mixer.dev.parent = &exynos4_device_pd[PD_TV].dev; +} + static void __init smdkv310_map_io(void) { s5p_init_io(NULL, 0, S5P_VA_CHIPID); @@ -301,6 +337,11 @@ static void __init smdkv310_map_io(void) s3c24xx_init_uarts(smdkv310_uartcfgs, ARRAY_SIZE(smdkv310_uartcfgs)); } +static void __init smdkv310_reserve(void) +{ + s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20); +} + static void __init smdkv310_machine_init(void) { s3c_i2c1_set_platdata(NULL); @@ -313,12 +354,19 @@ static void __init smdkv310_machine_init(void) s3c_sdhci2_set_platdata(&smdkv310_hsmmc2_pdata); s3c_sdhci3_set_platdata(&smdkv310_hsmmc3_pdata); + s5p_tv_setup(); + s5p_i2c_hdmiphy_set_platdata(NULL); + samsung_keypad_set_platdata(&smdkv310_keypad_data); samsung_bl_set(&smdkv310_bl_gpio_info, &smdkv310_bl_data); s5p_fimd0_set_platdata(&smdkv310_lcd0_pdata); + smdkv310_ehci_init(); + clk_xusbxti.rate = 24000000; + platform_add_devices(smdkv310_devices, ARRAY_SIZE(smdkv310_devices)); + s5p_device_mfc.dev.parent = &exynos4_device_pd[PD_MFC].dev; } MACHINE_START(SMDKV310, "SMDKV310") @@ -329,6 +377,7 @@ MACHINE_START(SMDKV310, "SMDKV310") .map_io = smdkv310_map_io, .init_machine = smdkv310_machine_init, .timer = &exynos4_timer, + .reserve = &smdkv310_reserve, MACHINE_END MACHINE_START(SMDKC210, "SMDKC210") diff --git a/arch/arm/mach-exynos4/mach-universal_c210.c b/arch/arm/mach-exynos4/mach-universal_c210.c index b3b5d89..18cf5c7 100644 --- a/arch/arm/mach-exynos4/mach-universal_c210.c +++ b/arch/arm/mach-exynos4/mach-universal_c210.c @@ -13,6 +13,7 @@ #include <linux/i2c.h> #include <linux/gpio_keys.h> #include <linux/gpio.h> +#include <linux/fb.h> #include <linux/mfd/max8998.h> #include <linux/regulator/machine.h> #include <linux/regulator/fixed.h> @@ -31,12 +32,21 @@ #include <plat/devs.h> #include <plat/iic.h> #include <plat/gpio-cfg.h> +#include <plat/fb.h> #include <plat/mfc.h> #include <plat/sdhci.h> #include <plat/pd.h> +#include <plat/regs-fb-v4.h> +#include <plat/fimc-core.h> +#include <plat/camport.h> +#include <plat/mipi_csis.h> #include <mach/map.h> +#include <media/v4l2-mediabus.h> +#include <media/s5p_fimc.h> +#include <media/m5mols.h> + /* Following are default values for UCON, ULCON and UFCON UART registers */ #define UNIVERSAL_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ S3C2410_UCON_RXILEVEL | \ @@ -110,6 +120,9 @@ static struct regulator_consumer_supply lp3974_buck1_consumer = static struct regulator_consumer_supply lp3974_buck2_consumer = REGULATOR_SUPPLY("vddg3d", NULL); +static struct regulator_consumer_supply lp3974_buck3_consumer = + REGULATOR_SUPPLY("vdet", "s5p-sdo"); + static struct regulator_init_data lp3974_buck1_data = { .constraints = { .name = "VINT_1.1V", @@ -153,6 +166,8 @@ static struct regulator_init_data lp3974_buck3_data = { .enabled = 1, }, }, + .num_consumer_supplies = 1, + .consumer_supplies = &lp3974_buck3_consumer, }; static struct regulator_init_data lp3974_buck4_data = { @@ -181,6 +196,12 @@ static struct regulator_init_data lp3974_ldo2_data = { }, }; +static struct regulator_consumer_supply lp3974_ldo3_consumer[] = { + REGULATOR_SUPPLY("vdd", "exynos4-hdmi"), + REGULATOR_SUPPLY("vdd_pll", "exynos4-hdmi"), + REGULATOR_SUPPLY("vdd11", "s5p-mipi-csis.0"), +}; + static struct regulator_init_data lp3974_ldo3_data = { .constraints = { .name = "VUSB+MIPI_1.1V", @@ -192,6 +213,12 @@ static struct regulator_init_data lp3974_ldo3_data = { .disabled = 1, }, }, + .num_consumer_supplies = ARRAY_SIZE(lp3974_ldo3_consumer), + .consumer_supplies = lp3974_ldo3_consumer, +}; + +static struct regulator_consumer_supply lp3974_ldo4_consumer[] = { + REGULATOR_SUPPLY("vdd_osc", "exynos4-hdmi"), }; static struct regulator_init_data lp3974_ldo4_data = { @@ -205,6 +232,8 @@ static struct regulator_init_data lp3974_ldo4_data = { .disabled = 1, }, }, + .num_consumer_supplies = ARRAY_SIZE(lp3974_ldo4_consumer), + .consumer_supplies = lp3974_ldo4_consumer, }; static struct regulator_init_data lp3974_ldo5_data = { @@ -233,6 +262,10 @@ static struct regulator_init_data lp3974_ldo6_data = { }, }; +static struct regulator_consumer_supply lp3974_ldo7_consumer[] = { + REGULATOR_SUPPLY("vdd18", "s5p-mipi-csis.0"), +}; + static struct regulator_init_data lp3974_ldo7_data = { .constraints = { .name = "VLCD+VMIPI_1.8V", @@ -244,6 +277,12 @@ static struct regulator_init_data lp3974_ldo7_data = { .disabled = 1, }, }, + .num_consumer_supplies = ARRAY_SIZE(lp3974_ldo7_consumer), + .consumer_supplies = lp3974_ldo7_consumer, +}; + +static struct regulator_consumer_supply lp3974_ldo8_consumer[] = { + REGULATOR_SUPPLY("vdd33a_dac", "s5p-sdo"), }; static struct regulator_init_data lp3974_ldo8_data = { @@ -257,6 +296,8 @@ static struct regulator_init_data lp3974_ldo8_data = { .disabled = 1, }, }, + .num_consumer_supplies = ARRAY_SIZE(lp3974_ldo8_consumer), + .consumer_supplies = lp3974_ldo8_consumer, }; static struct regulator_init_data lp3974_ldo9_data = { @@ -286,6 +327,9 @@ static struct regulator_init_data lp3974_ldo10_data = { }, }; +static struct regulator_consumer_supply lp3974_ldo11_consumer = + REGULATOR_SUPPLY("dig_28", "0-001f"); + static struct regulator_init_data lp3974_ldo11_data = { .constraints = { .name = "CAM_AF_3.3V", @@ -297,6 +341,8 @@ static struct regulator_init_data lp3974_ldo11_data = { .disabled = 1, }, }, + .num_consumer_supplies = 1, + .consumer_supplies = &lp3974_ldo11_consumer, }; static struct regulator_init_data lp3974_ldo12_data = { @@ -325,6 +371,9 @@ static struct regulator_init_data lp3974_ldo13_data = { }, }; +static struct regulator_consumer_supply lp3974_ldo14_consumer = + REGULATOR_SUPPLY("dig_18", "0-001f"); + static struct regulator_init_data lp3974_ldo14_data = { .constraints = { .name = "CAM_I_HOST_1.8V", @@ -336,8 +385,14 @@ static struct regulator_init_data lp3974_ldo14_data = { .disabled = 1, }, }, + .num_consumer_supplies = 1, + .consumer_supplies = &lp3974_ldo14_consumer, }; + +static struct regulator_consumer_supply lp3974_ldo15_consumer = + REGULATOR_SUPPLY("dig_12", "0-001f"); + static struct regulator_init_data lp3974_ldo15_data = { .constraints = { .name = "CAM_S_DIG+FM33_CORE_1.2V", @@ -349,6 +404,12 @@ static struct regulator_init_data lp3974_ldo15_data = { .disabled = 1, }, }, + .num_consumer_supplies = 1, + .consumer_supplies = &lp3974_ldo15_consumer, +}; + +static struct regulator_consumer_supply lp3974_ldo16_consumer[] = { + REGULATOR_SUPPLY("a_sensor", "0-001f"), }; static struct regulator_init_data lp3974_ldo16_data = { @@ -362,6 +423,8 @@ static struct regulator_init_data lp3974_ldo16_data = { .disabled = 1, }, }, + .num_consumer_supplies = ARRAY_SIZE(lp3974_ldo16_consumer), + .consumer_supplies = lp3974_ldo16_consumer, }; static struct regulator_init_data lp3974_ldo17_data = { @@ -472,6 +535,43 @@ static struct max8998_platform_data universal_lp3974_pdata = { .wakeup = true, }; + +enum fixed_regulator_id { + FIXED_REG_ID_MMC0, + FIXED_REG_ID_HDMI_5V, + FIXED_REG_ID_CAM_S_IF, + FIXED_REG_ID_CAM_I_CORE, + FIXED_REG_ID_CAM_VT_DIO, +}; + +static struct regulator_consumer_supply hdmi_fixed_consumer = + REGULATOR_SUPPLY("hdmi-en", "exynos4-hdmi"); + +static struct regulator_init_data hdmi_fixed_voltage_init_data = { + .constraints = { + .name = "HDMI_5V", + .valid_ops_mask = REGULATOR_CHANGE_STATUS, + }, + .num_consumer_supplies = 1, + .consumer_supplies = &hdmi_fixed_consumer, +}; + +static struct fixed_voltage_config hdmi_fixed_voltage_config = { + .supply_name = "HDMI_EN1", + .microvolts = 5000000, + .gpio = EXYNOS4_GPE0(1), + .enable_high = true, + .init_data = &hdmi_fixed_voltage_init_data, +}; + +static struct platform_device hdmi_fixed_voltage = { + .name = "reg-fixed-voltage", + .id = FIXED_REG_ID_HDMI_5V, + .dev = { + .platform_data = &hdmi_fixed_voltage_config, + }, +}; + /* GPIO I2C 5 (PMIC) */ static struct i2c_board_info i2c5_devs[] __initdata = { { @@ -573,6 +673,11 @@ static void __init universal_touchkey_init(void) gpio_direction_output(gpio, 1); } +static struct s3c2410_platform_i2c universal_i2c0_platdata __initdata = { + .frequency = 300 * 1000, + .sda_delay = 200, +}; + /* GPIO KEYS */ static struct gpio_keys_button universal_gpio_keys_tables[] = { { @@ -658,7 +763,7 @@ static struct fixed_voltage_config mmc0_fixed_voltage_config = { static struct platform_device mmc0_fixed_voltage = { .name = "reg-fixed-voltage", - .id = 0, + .id = FIXED_REG_ID_MMC0, .dev = { .platform_data = &mmc0_fixed_voltage_config, }, @@ -692,18 +797,170 @@ static void __init universal_sdhci_init(void) s3c_sdhci3_set_platdata(&universal_hsmmc3_data); } -/* I2C0 */ -static struct i2c_board_info i2c0_devs[] __initdata = { - /* Camera, To be updated */ -}; - /* I2C1 */ static struct i2c_board_info i2c1_devs[] __initdata = { /* Gyro, To be updated */ }; +/* Frame Buffer */ +static struct s3c_fb_pd_win universal_fb_win0 = { + .win_mode = { + .left_margin = 16, + .right_margin = 16, + .upper_margin = 2, + .lower_margin = 28, + .hsync_len = 2, + .vsync_len = 1, + .xres = 480, + .yres = 800, + .refresh = 55, + }, + .max_bpp = 32, + .default_bpp = 16, +}; + +static struct s3c_fb_platdata universal_lcd_pdata __initdata = { + .win[0] = &universal_fb_win0, + .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB | + VIDCON0_CLKSEL_LCD, + .vidcon1 = VIDCON1_INV_VCLK | VIDCON1_INV_VDEN + | VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, + .setup_gpio = exynos4_fimd0_gpio_setup_24bpp, +}; + +static struct regulator_consumer_supply cam_i_core_supply = + REGULATOR_SUPPLY("core", "0-001f"); + +static struct regulator_init_data cam_i_core_reg_init_data = { + .constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS }, + .num_consumer_supplies = 1, + .consumer_supplies = &cam_i_core_supply, +}; + +static struct fixed_voltage_config cam_i_core_fixed_voltage_cfg = { + .supply_name = "CAM_I_CORE_1.2V", + .microvolts = 1200000, + .gpio = EXYNOS4_GPE2(2), /* CAM_8M_CORE_EN */ + .enable_high = 1, + .init_data = &cam_i_core_reg_init_data, +}; + +static struct platform_device cam_i_core_fixed_reg_dev = { + .name = "reg-fixed-voltage", .id = FIXED_REG_ID_CAM_I_CORE, + .dev = { .platform_data = &cam_i_core_fixed_voltage_cfg }, +}; + +static struct regulator_consumer_supply cam_s_if_supply = + REGULATOR_SUPPLY("d_sensor", "0-001f"); + +static struct regulator_init_data cam_s_if_reg_init_data = { + .constraints = { .valid_ops_mask = REGULATOR_CHANGE_STATUS }, + .num_consumer_supplies = 1, + .consumer_supplies = &cam_s_if_supply, +}; + +static struct fixed_voltage_config cam_s_if_fixed_voltage_cfg = { + .supply_name = "CAM_S_IF_1.8V", + .microvolts = 1800000, + .gpio = EXYNOS4_GPE3(0), /* CAM_PWR_EN1 */ + .enable_high = 1, + .init_data = &cam_s_if_reg_init_data, +}; + +static struct platform_device cam_s_if_fixed_reg_dev = { + .name = "reg-fixed-voltage", .id = FIXED_REG_ID_CAM_S_IF, + .dev = { .platform_data = &cam_s_if_fixed_voltage_cfg }, +}; + +static struct s5p_platform_mipi_csis mipi_csis_platdata = { + .clk_rate = 166000000UL, + .lanes = 2, + .alignment = 32, + .hs_settle = 12, + .phy_enable = s5p_csis_phy_enable, +}; + +#define GPIO_CAM_LEVEL_EN(n) EXYNOS4_GPE4(n + 3) +#define GPIO_CAM_8M_ISP_INT EXYNOS4_GPX1(5) /* XEINT_13 */ +#define GPIO_CAM_MEGA_nRST EXYNOS4_GPE2(5) + +static int m5mols_set_power(struct device *dev, int on) +{ + gpio_set_value(GPIO_CAM_LEVEL_EN(1), !on); + gpio_set_value(GPIO_CAM_LEVEL_EN(2), !!on); + return 0; +} + +static struct m5mols_platform_data m5mols_platdata = { + .gpio_reset = GPIO_CAM_MEGA_nRST, + .reset_polarity = 0, + .set_power = m5mols_set_power, +}; + +static struct i2c_board_info m5mols_board_info = { + I2C_BOARD_INFO("M5MOLS", 0x1F), + .platform_data = &m5mols_platdata, +}; + +static struct s5p_fimc_isp_info universal_camera_sensors[] = { + { + .mux_id = 0, + .flags = V4L2_MBUS_PCLK_SAMPLE_FALLING | + V4L2_MBUS_VSYNC_ACTIVE_LOW, + .bus_type = FIMC_MIPI_CSI2, + .board_info = &m5mols_board_info, + .i2c_bus_num = 0, + .clk_frequency = 21600000UL, + .csi_data_align = 32, + }, +}; + +static struct s5p_platform_fimc fimc_md_platdata = { + .isp_info = universal_camera_sensors, + .num_clients = ARRAY_SIZE(universal_camera_sensors), +}; + +struct platform_device s5p_device_fimc_md = { + .name = "s5p-fimc-md", + .id = -1, +}; + +static struct gpio universal_camera_gpios[] = { + { GPIO_CAM_LEVEL_EN(1), GPIOF_OUT_INIT_HIGH, "CAM_LVL_EN1" }, + { GPIO_CAM_LEVEL_EN(2), GPIOF_OUT_INIT_LOW, "CAM_LVL_EN2" }, + { GPIO_CAM_8M_ISP_INT, GPIOF_IN, "8M_ISP_INT" }, + { GPIO_CAM_MEGA_nRST, GPIOF_OUT_INIT_LOW, "CAM_8M_NRST" }, +}; + +static void universal_camera_init(void) +{ + s3c_set_platdata(&mipi_csis_platdata, sizeof(mipi_csis_platdata), + &s5p_device_mipi_csis0); + s3c_set_platdata(&fimc_md_platdata, sizeof(fimc_md_platdata), + &s5p_device_fimc_md); + + if (gpio_request_array(universal_camera_gpios, + ARRAY_SIZE(universal_camera_gpios))) { + pr_err("%s: GPIO request failed\n", __func__); + return; + } + + if (!s3c_gpio_cfgpin(GPIO_CAM_8M_ISP_INT, S3C_GPIO_SFN(0xf))) + m5mols_board_info.irq = gpio_to_irq(GPIO_CAM_8M_ISP_INT); + else + pr_err("Failed to configure 8M_ISP_INT GPIO\n"); + + /* Free GPIOs controlled directly by the sensor drivers. */ + gpio_free(GPIO_CAM_MEGA_nRST); + gpio_free(GPIO_CAM_8M_ISP_INT); + + if (exynos4_fimc_setup_gpio(S5P_CAMPORT_A)) + pr_err("Camera port A setup failed\n"); +} + static struct platform_device *universal_devices[] __initdata = { /* Samsung Platform Devices */ + &s5p_device_mipi_csis0, &s5p_device_fimc0, &s5p_device_fimc1, &s5p_device_fimc2, @@ -712,17 +969,30 @@ static struct platform_device *universal_devices[] __initdata = { &s3c_device_hsmmc0, &s3c_device_hsmmc2, &s3c_device_hsmmc3, + &s3c_device_i2c0, &s3c_device_i2c3, &s3c_device_i2c5, + &s5p_device_i2c_hdmiphy, + &hdmi_fixed_voltage, + &exynos4_device_pd[PD_TV], + &s5p_device_hdmi, + &s5p_device_sdo, + &s5p_device_mixer, /* Universal Devices */ &i2c_gpio12, &universal_gpio_keys, &s5p_device_onenand, + &s5p_device_fimd0, &s5p_device_mfc, &s5p_device_mfc_l, &s5p_device_mfc_r, &exynos4_device_pd[PD_MFC], + &exynos4_device_pd[PD_LCD0], + &exynos4_device_pd[PD_CAM], + &cam_i_core_fixed_reg_dev, + &cam_s_if_fixed_reg_dev, + &s5p_device_fimc_md, }; static void __init universal_map_io(void) @@ -732,6 +1002,20 @@ static void __init universal_map_io(void) s3c24xx_init_uarts(universal_uartcfgs, ARRAY_SIZE(universal_uartcfgs)); } +void s5p_tv_setup(void) +{ + /* direct HPD to HDMI chip */ + gpio_request(EXYNOS4_GPX3(7), "hpd-plug"); + + gpio_direction_input(EXYNOS4_GPX3(7)); + s3c_gpio_cfgpin(EXYNOS4_GPX3(7), S3C_GPIO_SFN(0x3)); + s3c_gpio_setpull(EXYNOS4_GPX3(7), S3C_GPIO_PULL_NONE); + + /* setup dependencies between TV devices */ + s5p_device_hdmi.dev.parent = &exynos4_device_pd[PD_TV].dev; + s5p_device_mixer.dev.parent = &exynos4_device_pd[PD_TV].dev; +} + static void __init universal_reserve(void) { s5p_mfc_reserve_mem(0x43000000, 8 << 20, 0x51000000, 8 << 20); @@ -740,8 +1024,9 @@ static void __init universal_reserve(void) static void __init universal_machine_init(void) { universal_sdhci_init(); + s5p_tv_setup(); - i2c_register_board_info(0, i2c0_devs, ARRAY_SIZE(i2c0_devs)); + s3c_i2c0_set_platdata(&universal_i2c0_platdata); i2c_register_board_info(1, i2c1_devs, ARRAY_SIZE(i2c1_devs)); universal_tsp_init(); @@ -749,15 +1034,28 @@ static void __init universal_machine_init(void) i2c_register_board_info(3, i2c3_devs, ARRAY_SIZE(i2c3_devs)); s3c_i2c5_set_platdata(NULL); + s5p_i2c_hdmiphy_set_platdata(NULL); i2c_register_board_info(5, i2c5_devs, ARRAY_SIZE(i2c5_devs)); + s5p_fimd0_set_platdata(&universal_lcd_pdata); + universal_touchkey_init(); i2c_register_board_info(I2C_GPIO_BUS_12, i2c_gpio12_devs, ARRAY_SIZE(i2c_gpio12_devs)); + universal_camera_init(); + /* Last */ platform_add_devices(universal_devices, ARRAY_SIZE(universal_devices)); + s5p_device_mfc.dev.parent = &exynos4_device_pd[PD_MFC].dev; + s5p_device_fimd0.dev.parent = &exynos4_device_pd[PD_LCD0].dev; + + s5p_device_fimc0.dev.parent = &exynos4_device_pd[PD_CAM].dev; + s5p_device_fimc1.dev.parent = &exynos4_device_pd[PD_CAM].dev; + s5p_device_fimc2.dev.parent = &exynos4_device_pd[PD_CAM].dev; + s5p_device_fimc3.dev.parent = &exynos4_device_pd[PD_CAM].dev; + s5p_device_mipi_csis0.dev.parent = &exynos4_device_pd[PD_CAM].dev; } MACHINE_START(UNIVERSAL_C210, "UNIVERSAL_C210") diff --git a/arch/arm/mach-exynos4/pm.c b/arch/arm/mach-exynos4/pm.c index 62e4f43..509a435 100644 --- a/arch/arm/mach-exynos4/pm.c +++ b/arch/arm/mach-exynos4/pm.c @@ -339,6 +339,13 @@ static int exynos4_pm_suspend(void) tmp &= ~S5P_CENTRAL_LOWPWR_CFG; __raw_writel(tmp, S5P_CENTRAL_SEQ_CONFIGURATION); + if (soc_is_exynos4212()) { + tmp = __raw_readl(S5P_CENTRAL_SEQ_OPTION); + tmp &= ~(S5P_USE_STANDBYWFI_ISP_ARM | + S5P_USE_STANDBYWFE_ISP_ARM); + __raw_writel(tmp, S5P_CENTRAL_SEQ_OPTION); + } + /* Save Power control register */ asm ("mrc p15, 0, %0, c15, c0, 0" : "=r" (tmp) : : "cc"); diff --git a/arch/arm/mach-exynos4/pmu.c b/arch/arm/mach-exynos4/pmu.c index 7ea9eb2..bba48f5 100644 --- a/arch/arm/mach-exynos4/pmu.c +++ b/arch/arm/mach-exynos4/pmu.c @@ -16,160 +16,215 @@ #include <mach/regs-clock.h> #include <mach/pmu.h> -static void __iomem *sys_powerdown_reg[] = { - S5P_ARM_CORE0_LOWPWR, - S5P_DIS_IRQ_CORE0, - S5P_DIS_IRQ_CENTRAL0, - S5P_ARM_CORE1_LOWPWR, - S5P_DIS_IRQ_CORE1, - S5P_DIS_IRQ_CENTRAL1, - S5P_ARM_COMMON_LOWPWR, - S5P_L2_0_LOWPWR, - S5P_L2_1_LOWPWR, - S5P_CMU_ACLKSTOP_LOWPWR, - S5P_CMU_SCLKSTOP_LOWPWR, - S5P_CMU_RESET_LOWPWR, - S5P_APLL_SYSCLK_LOWPWR, - S5P_MPLL_SYSCLK_LOWPWR, - S5P_VPLL_SYSCLK_LOWPWR, - S5P_EPLL_SYSCLK_LOWPWR, - S5P_CMU_CLKSTOP_GPS_ALIVE_LOWPWR, - S5P_CMU_RESET_GPSALIVE_LOWPWR, - S5P_CMU_CLKSTOP_CAM_LOWPWR, - S5P_CMU_CLKSTOP_TV_LOWPWR, - S5P_CMU_CLKSTOP_MFC_LOWPWR, - S5P_CMU_CLKSTOP_G3D_LOWPWR, - S5P_CMU_CLKSTOP_LCD0_LOWPWR, - S5P_CMU_CLKSTOP_LCD1_LOWPWR, - S5P_CMU_CLKSTOP_MAUDIO_LOWPWR, - S5P_CMU_CLKSTOP_GPS_LOWPWR, - S5P_CMU_RESET_CAM_LOWPWR, - S5P_CMU_RESET_TV_LOWPWR, - S5P_CMU_RESET_MFC_LOWPWR, - S5P_CMU_RESET_G3D_LOWPWR, - S5P_CMU_RESET_LCD0_LOWPWR, - S5P_CMU_RESET_LCD1_LOWPWR, - S5P_CMU_RESET_MAUDIO_LOWPWR, - S5P_CMU_RESET_GPS_LOWPWR, - S5P_TOP_BUS_LOWPWR, - S5P_TOP_RETENTION_LOWPWR, - S5P_TOP_PWR_LOWPWR, - S5P_LOGIC_RESET_LOWPWR, - S5P_ONENAND_MEM_LOWPWR, - S5P_MODIMIF_MEM_LOWPWR, - S5P_G2D_ACP_MEM_LOWPWR, - S5P_USBOTG_MEM_LOWPWR, - S5P_HSMMC_MEM_LOWPWR, - S5P_CSSYS_MEM_LOWPWR, - S5P_SECSS_MEM_LOWPWR, - S5P_PCIE_MEM_LOWPWR, - S5P_SATA_MEM_LOWPWR, - S5P_PAD_RETENTION_DRAM_LOWPWR, - S5P_PAD_RETENTION_MAUDIO_LOWPWR, - S5P_PAD_RETENTION_GPIO_LOWPWR, - S5P_PAD_RETENTION_UART_LOWPWR, - S5P_PAD_RETENTION_MMCA_LOWPWR, - S5P_PAD_RETENTION_MMCB_LOWPWR, - S5P_PAD_RETENTION_EBIA_LOWPWR, - S5P_PAD_RETENTION_EBIB_LOWPWR, - S5P_PAD_RETENTION_ISOLATION_LOWPWR, - S5P_PAD_RETENTION_ALV_SEL_LOWPWR, - S5P_XUSBXTI_LOWPWR, - S5P_XXTI_LOWPWR, - S5P_EXT_REGULATOR_LOWPWR, - S5P_GPIO_MODE_LOWPWR, - S5P_GPIO_MODE_MAUDIO_LOWPWR, - S5P_CAM_LOWPWR, - S5P_TV_LOWPWR, - S5P_MFC_LOWPWR, - S5P_G3D_LOWPWR, - S5P_LCD0_LOWPWR, - S5P_LCD1_LOWPWR, - S5P_MAUDIO_LOWPWR, - S5P_GPS_LOWPWR, - S5P_GPS_ALIVE_LOWPWR, +static struct exynos4_pmu_conf *exynos4_pmu_config; + +static struct exynos4_pmu_conf exynos4210_pmu_config[] = { + /* { .reg = address, .val = { AFTR, LPA, SLEEP } */ + { S5P_ARM_CORE0_LOWPWR, { 0x0, 0x0, 0x2 } }, + { S5P_DIS_IRQ_CORE0, { 0x0, 0x0, 0x0 } }, + { S5P_DIS_IRQ_CENTRAL0, { 0x0, 0x0, 0x0 } }, + { S5P_ARM_CORE1_LOWPWR, { 0x0, 0x0, 0x2 } }, + { S5P_DIS_IRQ_CORE1, { 0x0, 0x0, 0x0 } }, + { S5P_DIS_IRQ_CENTRAL1, { 0x0, 0x0, 0x0 } }, + { S5P_ARM_COMMON_LOWPWR, { 0x0, 0x0, 0x2 } }, + { S5P_L2_0_LOWPWR, { 0x2, 0x2, 0x3 } }, + { S5P_L2_1_LOWPWR, { 0x2, 0x2, 0x3 } }, + { S5P_CMU_ACLKSTOP_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_CMU_SCLKSTOP_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_CMU_RESET_LOWPWR, { 0x1, 0x1, 0x0 } }, + { S5P_APLL_SYSCLK_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_MPLL_SYSCLK_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_VPLL_SYSCLK_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_EPLL_SYSCLK_LOWPWR, { 0x1, 0x1, 0x0 } }, + { S5P_CMU_CLKSTOP_GPS_ALIVE_LOWPWR, { 0x1, 0x1, 0x0 } }, + { S5P_CMU_RESET_GPSALIVE_LOWPWR, { 0x1, 0x1, 0x0 } }, + { S5P_CMU_CLKSTOP_CAM_LOWPWR, { 0x1, 0x1, 0x0 } }, + { S5P_CMU_CLKSTOP_TV_LOWPWR, { 0x1, 0x1, 0x0 } }, + { S5P_CMU_CLKSTOP_MFC_LOWPWR, { 0x1, 0x1, 0x0 } }, + { S5P_CMU_CLKSTOP_G3D_LOWPWR, { 0x1, 0x1, 0x0 } }, + { S5P_CMU_CLKSTOP_LCD0_LOWPWR, { 0x1, 0x1, 0x0 } }, + { S5P_CMU_CLKSTOP_LCD1_LOWPWR, { 0x1, 0x1, 0x0 } }, + { S5P_CMU_CLKSTOP_MAUDIO_LOWPWR, { 0x1, 0x1, 0x0 } }, + { S5P_CMU_CLKSTOP_GPS_LOWPWR, { 0x1, 0x1, 0x0 } }, + { S5P_CMU_RESET_CAM_LOWPWR, { 0x1, 0x1, 0x0 } }, + { S5P_CMU_RESET_TV_LOWPWR, { 0x1, 0x1, 0x0 } }, + { S5P_CMU_RESET_MFC_LOWPWR, { 0x1, 0x1, 0x0 } }, + { S5P_CMU_RESET_G3D_LOWPWR, { 0x1, 0x1, 0x0 } }, + { S5P_CMU_RESET_LCD0_LOWPWR, { 0x1, 0x1, 0x0 } }, + { S5P_CMU_RESET_LCD1_LOWPWR, { 0x1, 0x1, 0x0 } }, + { S5P_CMU_RESET_MAUDIO_LOWPWR, { 0x1, 0x1, 0x0 } }, + { S5P_CMU_RESET_GPS_LOWPWR, { 0x1, 0x1, 0x0 } }, + { S5P_TOP_BUS_LOWPWR, { 0x3, 0x0, 0x0 } }, + { S5P_TOP_RETENTION_LOWPWR, { 0x1, 0x0, 0x1 } }, + { S5P_TOP_PWR_LOWPWR, { 0x3, 0x0, 0x3 } }, + { S5P_LOGIC_RESET_LOWPWR, { 0x1, 0x1, 0x0 } }, + { S5P_ONENAND_MEM_LOWPWR, { 0x3, 0x0, 0x0 } }, + { S5P_MODIMIF_MEM_LOWPWR, { 0x3, 0x0, 0x0 } }, + { S5P_G2D_ACP_MEM_LOWPWR, { 0x3, 0x0, 0x0 } }, + { S5P_USBOTG_MEM_LOWPWR, { 0x3, 0x0, 0x0 } }, + { S5P_HSMMC_MEM_LOWPWR, { 0x3, 0x0, 0x0 } }, + { S5P_CSSYS_MEM_LOWPWR, { 0x3, 0x0, 0x0 } }, + { S5P_SECSS_MEM_LOWPWR, { 0x3, 0x0, 0x0 } }, + { S5P_PCIE_MEM_LOWPWR, { 0x3, 0x0, 0x0 } }, + { S5P_SATA_MEM_LOWPWR, { 0x3, 0x0, 0x0 } }, + { S5P_PAD_RETENTION_DRAM_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_PAD_RETENTION_MAUDIO_LOWPWR, { 0x1, 0x1, 0x0 } }, + { S5P_PAD_RETENTION_GPIO_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_PAD_RETENTION_UART_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_PAD_RETENTION_MMCA_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_PAD_RETENTION_MMCB_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_PAD_RETENTION_EBIA_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_PAD_RETENTION_EBIB_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_PAD_RETENTION_ISOLATION_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_PAD_RETENTION_ALV_SEL_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_XUSBXTI_LOWPWR, { 0x1, 0x1, 0x0 } }, + { S5P_XXTI_LOWPWR, { 0x1, 0x1, 0x0 } }, + { S5P_EXT_REGULATOR_LOWPWR, { 0x1, 0x1, 0x0 } }, + { S5P_GPIO_MODE_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_GPIO_MODE_MAUDIO_LOWPWR, { 0x1, 0x1, 0x0 } }, + { S5P_CAM_LOWPWR, { 0x7, 0x0, 0x0 } }, + { S5P_TV_LOWPWR, { 0x7, 0x0, 0x0 } }, + { S5P_MFC_LOWPWR, { 0x7, 0x0, 0x0 } }, + { S5P_G3D_LOWPWR, { 0x7, 0x0, 0x0 } }, + { S5P_LCD0_LOWPWR, { 0x7, 0x0, 0x0 } }, + { S5P_LCD1_LOWPWR, { 0x7, 0x0, 0x0 } }, + { S5P_MAUDIO_LOWPWR, { 0x7, 0x7, 0x0 } }, + { S5P_GPS_LOWPWR, { 0x7, 0x0, 0x0 } }, + { S5P_GPS_ALIVE_LOWPWR, { 0x7, 0x0, 0x0 } }, + { PMU_TABLE_END,}, }; -static const unsigned int sys_powerdown_val[][NUM_SYS_POWERDOWN] = { - /* { AFTR, LPA, SLEEP }*/ - { 0, 0, 2 }, /* ARM_CORE0 */ - { 0, 0, 0 }, /* ARM_DIS_IRQ_CORE0 */ - { 0, 0, 0 }, /* ARM_DIS_IRQ_CENTRAL0 */ - { 0, 0, 2 }, /* ARM_CORE1 */ - { 0, 0, 0 }, /* ARM_DIS_IRQ_CORE1 */ - { 0, 0, 0 }, /* ARM_DIS_IRQ_CENTRAL1 */ - { 0, 0, 2 }, /* ARM_COMMON */ - { 2, 2, 3 }, /* ARM_CPU_L2_0 */ - { 2, 2, 3 }, /* ARM_CPU_L2_1 */ - { 1, 0, 0 }, /* CMU_ACLKSTOP */ - { 1, 0, 0 }, /* CMU_SCLKSTOP */ - { 1, 1, 0 }, /* CMU_RESET */ - { 1, 0, 0 }, /* APLL_SYSCLK */ - { 1, 0, 0 }, /* MPLL_SYSCLK */ - { 1, 0, 0 }, /* VPLL_SYSCLK */ - { 1, 1, 0 }, /* EPLL_SYSCLK */ - { 1, 1, 0 }, /* CMU_CLKSTOP_GPS_ALIVE */ - { 1, 1, 0 }, /* CMU_RESET_GPS_ALIVE */ - { 1, 1, 0 }, /* CMU_CLKSTOP_CAM */ - { 1, 1, 0 }, /* CMU_CLKSTOP_TV */ - { 1, 1, 0 }, /* CMU_CLKSTOP_MFC */ - { 1, 1, 0 }, /* CMU_CLKSTOP_G3D */ - { 1, 1, 0 }, /* CMU_CLKSTOP_LCD0 */ - { 1, 1, 0 }, /* CMU_CLKSTOP_LCD1 */ - { 1, 1, 0 }, /* CMU_CLKSTOP_MAUDIO */ - { 1, 1, 0 }, /* CMU_CLKSTOP_GPS */ - { 1, 1, 0 }, /* CMU_RESET_CAM */ - { 1, 1, 0 }, /* CMU_RESET_TV */ - { 1, 1, 0 }, /* CMU_RESET_MFC */ - { 1, 1, 0 }, /* CMU_RESET_G3D */ - { 1, 1, 0 }, /* CMU_RESET_LCD0 */ - { 1, 1, 0 }, /* CMU_RESET_LCD1 */ - { 1, 1, 0 }, /* CMU_RESET_MAUDIO */ - { 1, 1, 0 }, /* CMU_RESET_GPS */ - { 3, 0, 0 }, /* TOP_BUS */ - { 1, 0, 1 }, /* TOP_RETENTION */ - { 3, 0, 3 }, /* TOP_PWR */ - { 1, 1, 0 }, /* LOGIC_RESET */ - { 3, 0, 0 }, /* ONENAND_MEM */ - { 3, 0, 0 }, /* MODIMIF_MEM */ - { 3, 0, 0 }, /* G2D_ACP_MEM */ - { 3, 0, 0 }, /* USBOTG_MEM */ - { 3, 0, 0 }, /* HSMMC_MEM */ - { 3, 0, 0 }, /* CSSYS_MEM */ - { 3, 0, 0 }, /* SECSS_MEM */ - { 3, 0, 0 }, /* PCIE_MEM */ - { 3, 0, 0 }, /* SATA_MEM */ - { 1, 0, 0 }, /* PAD_RETENTION_DRAM */ - { 1, 1, 0 }, /* PAD_RETENTION_MAUDIO */ - { 1, 0, 0 }, /* PAD_RETENTION_GPIO */ - { 1, 0, 0 }, /* PAD_RETENTION_UART */ - { 1, 0, 0 }, /* PAD_RETENTION_MMCA */ - { 1, 0, 0 }, /* PAD_RETENTION_MMCB */ - { 1, 0, 0 }, /* PAD_RETENTION_EBIA */ - { 1, 0, 0 }, /* PAD_RETENTION_EBIB */ - { 1, 0, 0 }, /* PAD_RETENTION_ISOLATION */ - { 1, 0, 0 }, /* PAD_RETENTION_ALV_SEL */ - { 1, 1, 0 }, /* XUSBXTI */ - { 1, 1, 0 }, /* XXTI */ - { 1, 1, 0 }, /* EXT_REGULATOR */ - { 1, 0, 0 }, /* GPIO_MODE */ - { 1, 1, 0 }, /* GPIO_MODE_MAUDIO */ - { 7, 0, 0 }, /* CAM */ - { 7, 0, 0 }, /* TV */ - { 7, 0, 0 }, /* MFC */ - { 7, 0, 0 }, /* G3D */ - { 7, 0, 0 }, /* LCD0 */ - { 7, 0, 0 }, /* LCD1 */ - { 7, 7, 0 }, /* MAUDIO */ - { 7, 0, 0 }, /* GPS */ - { 7, 0, 0 }, /* GPS_ALIVE */ +static struct exynos4_pmu_conf exynos4212_pmu_config[] = { + { S5P_ARM_CORE0_LOWPWR, { 0x0, 0x0, 0x2 } }, + { S5P_DIS_IRQ_CORE0, { 0x0, 0x0, 0x0 } }, + { S5P_DIS_IRQ_CENTRAL0, { 0x0, 0x0, 0x0 } }, + { S5P_ARM_CORE1_LOWPWR, { 0x0, 0x0, 0x2 } }, + { S5P_DIS_IRQ_CORE1, { 0x0, 0x0, 0x0 } }, + { S5P_DIS_IRQ_CENTRAL1, { 0x0, 0x0, 0x0 } }, + { S5P_ISP_ARM_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_DIS_IRQ_ISP_ARM_LOCAL_LOWPWR, { 0x0, 0x0, 0x0 } }, + { S5P_DIS_IRQ_ISP_ARM_CENTRAL_LOWPWR, { 0x0, 0x0, 0x0 } }, + { S5P_ARM_COMMON_LOWPWR, { 0x0, 0x0, 0x2 } }, + { S5P_L2_0_LOWPWR, { 0x0, 0x0, 0x3 } }, + /* XXX_OPTION register should be set other field */ + { S5P_ARM_L2_0_OPTION, { 0x10, 0x10, 0x0 } }, + { S5P_L2_1_LOWPWR, { 0x0, 0x0, 0x3 } }, + { S5P_ARM_L2_1_OPTION, { 0x10, 0x10, 0x0 } }, + { S5P_CMU_ACLKSTOP_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_CMU_SCLKSTOP_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_CMU_RESET_LOWPWR, { 0x1, 0x1, 0x0 } }, + { S5P_DRAM_FREQ_DOWN_LOWPWR, { 0x1, 0x1, 0x1 } }, + { S5P_DDRPHY_DLLOFF_LOWPWR, { 0x1, 0x1, 0x1 } }, + { S5P_LPDDR_PHY_DLL_LOCK_LOWPWR, { 0x1, 0x1, 0x1 } }, + { S5P_CMU_ACLKSTOP_COREBLK_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_CMU_SCLKSTOP_COREBLK_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_CMU_RESET_COREBLK_LOWPWR, { 0x1, 0x1, 0x0 } }, + { S5P_APLL_SYSCLK_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_MPLL_SYSCLK_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_VPLL_SYSCLK_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_EPLL_SYSCLK_LOWPWR, { 0x1, 0x1, 0x0 } }, + { S5P_MPLLUSER_SYSCLK_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_CMU_CLKSTOP_GPS_ALIVE_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_CMU_RESET_GPSALIVE_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_CMU_CLKSTOP_CAM_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_CMU_CLKSTOP_TV_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_CMU_CLKSTOP_MFC_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_CMU_CLKSTOP_G3D_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_CMU_CLKSTOP_LCD0_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_CMU_CLKSTOP_ISP_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_CMU_CLKSTOP_MAUDIO_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_CMU_CLKSTOP_GPS_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_CMU_RESET_CAM_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_CMU_RESET_TV_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_CMU_RESET_MFC_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_CMU_RESET_G3D_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_CMU_RESET_LCD0_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_CMU_RESET_ISP_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_CMU_RESET_MAUDIO_LOWPWR, { 0x1, 0x1, 0x0 } }, + { S5P_CMU_RESET_GPS_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_TOP_BUS_LOWPWR, { 0x3, 0x0, 0x0 } }, + { S5P_TOP_RETENTION_LOWPWR, { 0x1, 0x0, 0x1 } }, + { S5P_TOP_PWR_LOWPWR, { 0x3, 0x0, 0x3 } }, + { S5P_TOP_BUS_COREBLK_LOWPWR, { 0x3, 0x0, 0x0 } }, + { S5P_TOP_RETENTION_COREBLK_LOWPWR, { 0x1, 0x0, 0x1 } }, + { S5P_TOP_PWR_COREBLK_LOWPWR, { 0x3, 0x0, 0x3 } }, + { S5P_LOGIC_RESET_LOWPWR, { 0x1, 0x1, 0x0 } }, + { S5P_OSCCLK_GATE_LOWPWR, { 0x1, 0x0, 0x1 } }, + { S5P_LOGIC_RESET_COREBLK_LOWPWR, { 0x1, 0x1, 0x0 } }, + { S5P_OSCCLK_GATE_COREBLK_LOWPWR, { 0x1, 0x0, 0x1 } }, + { S5P_ONENAND_MEM_LOWPWR, { 0x3, 0x0, 0x0 } }, + { S5P_ONENAND_MEM_OPTION, { 0x10, 0x10, 0x0 } }, + { S5P_HSI_MEM_LOWPWR, { 0x3, 0x0, 0x0 } }, + { S5P_HSI_MEM_OPTION, { 0x10, 0x10, 0x0 } }, + { S5P_G2D_ACP_MEM_LOWPWR, { 0x3, 0x0, 0x0 } }, + { S5P_G2D_ACP_MEM_OPTION, { 0x10, 0x10, 0x0 } }, + { S5P_USBOTG_MEM_LOWPWR, { 0x3, 0x0, 0x0 } }, + { S5P_USBOTG_MEM_OPTION, { 0x10, 0x10, 0x0 } }, + { S5P_HSMMC_MEM_LOWPWR, { 0x3, 0x0, 0x0 } }, + { S5P_HSMMC_MEM_OPTION, { 0x10, 0x10, 0x0 } }, + { S5P_CSSYS_MEM_LOWPWR, { 0x3, 0x0, 0x0 } }, + { S5P_CSSYS_MEM_OPTION, { 0x10, 0x10, 0x0 } }, + { S5P_SECSS_MEM_LOWPWR, { 0x3, 0x0, 0x0 } }, + { S5P_SECSS_MEM_OPTION, { 0x10, 0x10, 0x0 } }, + { S5P_ROTATOR_MEM_LOWPWR, { 0x3, 0x0, 0x0 } }, + { S5P_ROTATOR_MEM_OPTION, { 0x10, 0x10, 0x0 } }, + { S5P_PAD_RETENTION_DRAM_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_PAD_RETENTION_MAUDIO_LOWPWR, { 0x1, 0x1, 0x0 } }, + { S5P_PAD_RETENTION_GPIO_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_PAD_RETENTION_UART_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_PAD_RETENTION_MMCA_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_PAD_RETENTION_MMCB_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_PAD_RETENTION_EBIA_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_PAD_RETENTION_EBIB_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_PAD_RETENTION_GPIO_COREBLK_LOWPWR,{ 0x1, 0x0, 0x0 } }, + { S5P_PAD_RETENTION_ISOLATION_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_PAD_ISOLATION_COREBLK_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_PAD_RETENTION_ALV_SEL_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_XUSBXTI_LOWPWR, { 0x1, 0x1, 0x0 } }, + { S5P_XXTI_LOWPWR, { 0x1, 0x1, 0x0 } }, + { S5P_EXT_REGULATOR_LOWPWR, { 0x1, 0x1, 0x0 } }, + { S5P_GPIO_MODE_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_GPIO_MODE_COREBLK_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_GPIO_MODE_MAUDIO_LOWPWR, { 0x1, 0x1, 0x0 } }, + { S5P_TOP_ASB_RESET_LOWPWR, { 0x1, 0x1, 0x1 } }, + { S5P_TOP_ASB_ISOLATION_LOWPWR, { 0x1, 0x0, 0x1 } }, + { S5P_CAM_LOWPWR, { 0x7, 0x0, 0x0 } }, + { S5P_TV_LOWPWR, { 0x7, 0x0, 0x0 } }, + { S5P_MFC_LOWPWR, { 0x7, 0x0, 0x0 } }, + { S5P_G3D_LOWPWR, { 0x7, 0x0, 0x0 } }, + { S5P_LCD0_LOWPWR, { 0x7, 0x0, 0x0 } }, + { S5P_ISP_LOWPWR, { 0x7, 0x0, 0x0 } }, + { S5P_MAUDIO_LOWPWR, { 0x7, 0x7, 0x0 } }, + { S5P_GPS_LOWPWR, { 0x7, 0x0, 0x0 } }, + { S5P_GPS_ALIVE_LOWPWR, { 0x7, 0x0, 0x0 } }, + { S5P_CMU_SYSCLK_ISP_LOWPWR, { 0x1, 0x0, 0x0 } }, + { S5P_CMU_SYSCLK_GPS_LOWPWR, { 0x1, 0x0, 0x0 } }, + { PMU_TABLE_END,}, }; void exynos4_sys_powerdown_conf(enum sys_powerdown mode) { - unsigned int count = ARRAY_SIZE(sys_powerdown_reg); + unsigned int i; + + for (i = 0; (exynos4_pmu_config[i].reg != PMU_TABLE_END) ; i++) + __raw_writel(exynos4_pmu_config[i].val[mode], + exynos4_pmu_config[i].reg); +} + +static int __init exynos4_pmu_init(void) +{ + exynos4_pmu_config = exynos4210_pmu_config; + + if (soc_is_exynos4210()) { + exynos4_pmu_config = exynos4210_pmu_config; + pr_info("EXYNOS4210 PMU Initialize\n"); + } else if (soc_is_exynos4212()) { + exynos4_pmu_config = exynos4212_pmu_config; + pr_info("EXYNOS4212 PMU Initialize\n"); + } else { + pr_info("EXYNOS4: PMU not supported\n"); + } - for (; count > 0; count--) - __raw_writel(sys_powerdown_val[count - 1][mode], - sys_powerdown_reg[count - 1]); + return 0; } +arch_initcall(exynos4_pmu_init); diff --git a/arch/arm/mach-exynos4/setup-sdhci.c b/arch/arm/mach-exynos4/setup-sdhci.c index 1e83f8c..92937b4 100644 --- a/arch/arm/mach-exynos4/setup-sdhci.c +++ b/arch/arm/mach-exynos4/setup-sdhci.c @@ -10,16 +10,7 @@ * published by the Free Software Foundation. */ -#include <linux/kernel.h> #include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/platform_device.h> -#include <linux/io.h> - -#include <linux/mmc/card.h> -#include <linux/mmc/host.h> - -#include <plat/regs-sdhci.h> /* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */ @@ -29,41 +20,3 @@ char *exynos4_hsmmc_clksrcs[4] = { [2] = "sclk_mmc", /* mmc_bus */ [3] = NULL, }; - -void exynos4_setup_sdhci_cfg_card(struct platform_device *dev, void __iomem *r, - struct mmc_ios *ios, struct mmc_card *card) -{ - u32 ctrl2, ctrl3; - - /* don't need to alter anything according to card-type */ - - ctrl2 = readl(r + S3C_SDHCI_CONTROL2); - - /* select base clock source to HCLK */ - - ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK; - - /* - * clear async mode, enable conflict mask, rx feedback ctrl, SD - * clk hold and no use debounce count - */ - - ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR | - S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK | - S3C_SDHCI_CTRL2_ENFBCLKRX | - S3C_SDHCI_CTRL2_DFCNT_NONE | - S3C_SDHCI_CTRL2_ENCLKOUTHOLD); - - /* Tx and Rx feedback clock delay control */ - - if (ios->clock < 25 * 1000000) - ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 | - S3C_SDHCI_CTRL3_FCSEL2 | - S3C_SDHCI_CTRL3_FCSEL1 | - S3C_SDHCI_CTRL3_FCSEL0); - else - ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0); - - writel(ctrl2, r + S3C_SDHCI_CONTROL2); - writel(ctrl3, r + S3C_SDHCI_CONTROL3); -} diff --git a/arch/arm/mach-integrator/integrator_ap.c b/arch/arm/mach-integrator/integrator_ap.c index fcf0ae9..8cdc730 100644 --- a/arch/arm/mach-integrator/integrator_ap.c +++ b/arch/arm/mach-integrator/integrator_ap.c @@ -32,6 +32,7 @@ #include <linux/interrupt.h> #include <linux/io.h> #include <linux/mtd/physmap.h> +#include <video/vga.h> #include <mach/hardware.h> #include <mach/platform.h> @@ -154,6 +155,7 @@ static struct map_desc ap_io_desc[] __initdata = { static void __init ap_map_io(void) { iotable_init(ap_io_desc, ARRAY_SIZE(ap_io_desc)); + vga_base = PCI_MEMORY_VADDR; } #define INTEGRATOR_SC_VALID_INT 0x003fffff diff --git a/arch/arm/mach-integrator/pci_v3.c b/arch/arm/mach-integrator/pci_v3.c index dd56bfb..11b86e5 100644 --- a/arch/arm/mach-integrator/pci_v3.c +++ b/arch/arm/mach-integrator/pci_v3.c @@ -27,7 +27,6 @@ #include <linux/spinlock.h> #include <linux/init.h> #include <linux/io.h> -#include <video/vga.h> #include <mach/hardware.h> #include <mach/platform.h> @@ -505,7 +504,6 @@ void __init pci_v3_preinit(void) pcibios_min_io = 0x6000; pcibios_min_mem = 0x00100000; - vga_base = PCI_MEMORY_VADDR; /* * Hook in our fault handler for PCI errors diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig index 7245a55..5261a7e 100644 --- a/arch/arm/mach-s3c2410/Kconfig +++ b/arch/arm/mach-s3c2410/Kconfig @@ -6,9 +6,7 @@ config CPU_S3C2410 bool depends on ARCH_S3C2410 select CPU_ARM920T - select S3C_GPIO_PULL_UP select S3C2410_CLOCK - select S3C2410_GPIO select CPU_LLSERIAL_S3C2410 select S3C2410_PM if PM select S3C2410_CPUFREQ if CPU_FREQ_S3C24XX @@ -28,11 +26,6 @@ config S3C2410_PM help Power Management code common to S3C2410 and better -config S3C2410_GPIO - bool - help - GPIO code for S3C2410 and similar processors - config SIMTEC_NOR bool help diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile index 8169535..782fd81 100644 --- a/arch/arm/mach-s3c2410/Makefile +++ b/arch/arm/mach-s3c2410/Makefile @@ -13,7 +13,6 @@ obj-$(CONFIG_CPU_S3C2410) += s3c2410.o obj-$(CONFIG_CPU_S3C2410_DMA) += dma.o obj-$(CONFIG_CPU_S3C2410_DMA) += dma.o obj-$(CONFIG_S3C2410_PM) += pm.o sleep.o -obj-$(CONFIG_S3C2410_GPIO) += gpio.o obj-$(CONFIG_S3C2410_CPUFREQ) += cpu-freq.o obj-$(CONFIG_S3C2410_PLLTABLE) += pll.o diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c index 0d8e043..dbe43df 100644 --- a/arch/arm/mach-s3c2410/dma.c +++ b/arch/arm/mach-s3c2410/dma.c @@ -47,38 +47,26 @@ static struct s3c24xx_dma_map __initdata s3c2410_dma_mappings[] = { .channels[0] = S3C2410_DCON_CH0_SDI | DMA_CH_VALID, .channels[2] = S3C2410_DCON_CH2_SDI | DMA_CH_VALID, .channels[3] = S3C2410_DCON_CH3_SDI | DMA_CH_VALID, - .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO, - .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO, }, [DMACH_SPI0] = { .name = "spi0", .channels[1] = S3C2410_DCON_CH1_SPI | DMA_CH_VALID, - .hw_addr.to = S3C2410_PA_SPI + S3C2410_SPTDAT, - .hw_addr.from = S3C2410_PA_SPI + S3C2410_SPRDAT, }, [DMACH_SPI1] = { .name = "spi1", .channels[3] = S3C2410_DCON_CH3_SPI | DMA_CH_VALID, - .hw_addr.to = S3C2410_PA_SPI + 0x20 + S3C2410_SPTDAT, - .hw_addr.from = S3C2410_PA_SPI + 0x20 + S3C2410_SPRDAT, }, [DMACH_UART0] = { .name = "uart0", .channels[0] = S3C2410_DCON_CH0_UART0 | DMA_CH_VALID, - .hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH, - .hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH, }, [DMACH_UART1] = { .name = "uart1", .channels[1] = S3C2410_DCON_CH1_UART1 | DMA_CH_VALID, - .hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH, - .hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH, }, [DMACH_UART2] = { .name = "uart2", .channels[3] = S3C2410_DCON_CH3_UART2 | DMA_CH_VALID, - .hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH, - .hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH, }, [DMACH_TIMER] = { .name = "timer", @@ -90,12 +78,10 @@ static struct s3c24xx_dma_map __initdata s3c2410_dma_mappings[] = { .name = "i2s-sdi", .channels[1] = S3C2410_DCON_CH1_I2SSDI | DMA_CH_VALID, .channels[2] = S3C2410_DCON_CH2_I2SSDI | DMA_CH_VALID, - .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO, }, [DMACH_I2S_OUT] = { .name = "i2s-sdo", .channels[2] = S3C2410_DCON_CH2_I2SSDO | DMA_CH_VALID, - .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO, }, [DMACH_USB_EP1] = { .name = "usb-ep1", diff --git a/arch/arm/mach-s3c2410/gpio.c b/arch/arm/mach-s3c2410/gpio.c deleted file mode 100644 index 9664e01..0000000 --- a/arch/arm/mach-s3c2410/gpio.c +++ /dev/null @@ -1,72 +0,0 @@ -/* linux/arch/arm/mach-s3c2410/gpio.c - * - * Copyright (c) 2004-2006 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2410 GPIO support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA - */ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/io.h> - -#include <mach/hardware.h> -#include <mach/gpio-fns.h> -#include <asm/irq.h> - -#include <mach/regs-gpio.h> - -int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on, - unsigned int config) -{ - void __iomem *reg = S3C24XX_EINFLT0; - unsigned long flags; - unsigned long val; - - if (pin < S3C2410_GPG(8) || pin > S3C2410_GPG(15)) - return -EINVAL; - - config &= 0xff; - - pin -= S3C2410_GPG(8); - reg += pin & ~3; - - local_irq_save(flags); - - /* update filter width and clock source */ - - val = __raw_readl(reg); - val &= ~(0xff << ((pin & 3) * 8)); - val |= config << ((pin & 3) * 8); - __raw_writel(val, reg); - - /* update filter enable */ - - val = __raw_readl(S3C24XX_EXTINT2); - val &= ~(1 << ((pin * 4) + 3)); - val |= on << ((pin * 4) + 3); - __raw_writel(val, S3C24XX_EXTINT2); - - local_irq_restore(flags); - - return 0; -} - -EXPORT_SYMBOL(s3c2410_gpio_irqfilter); diff --git a/arch/arm/mach-s3c2410/include/mach/dma.h b/arch/arm/mach-s3c2410/include/mach/dma.h index b2b2a5b..ae8e482 100644 --- a/arch/arm/mach-s3c2410/include/mach/dma.h +++ b/arch/arm/mach-s3c2410/include/mach/dma.h @@ -13,7 +13,6 @@ #ifndef __ASM_ARCH_DMA_H #define __ASM_ARCH_DMA_H __FILE__ -#include <plat/dma.h> #include <linux/sysdev.h> #define MAX_DMA_TRANSFER_SIZE 0x100000 /* Data Unit is half word */ @@ -51,6 +50,18 @@ enum dma_ch { DMACH_MAX, /* the end entry */ }; +static inline bool samsung_dma_has_circular(void) +{ + return false; +} + +static inline bool samsung_dma_is_dmadev(void) +{ + return false; +} + +#include <plat/dma.h> + #define DMACH_LOW_LEVEL (1<<28) /* use this to specifiy hardware ch no */ /* we have 4 dma channels */ @@ -163,7 +174,7 @@ struct s3c2410_dma_chan { struct s3c2410_dma_client *client; /* channel configuration */ - enum s3c2410_dmasrc source; + enum dma_data_direction source; enum dma_ch req_ch; unsigned long dev_addr; unsigned long load_timeout; @@ -196,9 +207,4 @@ struct s3c2410_dma_chan { typedef unsigned long dma_device_t; -static inline bool s3c_dma_has_circular(void) -{ - return false; -} - #endif /* __ASM_ARCH_DMA_H */ diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-fns.h b/arch/arm/mach-s3c2410/include/mach/gpio-fns.h index bab1392..c53ad34 100644 --- a/arch/arm/mach-s3c2410/include/mach/gpio-fns.h +++ b/arch/arm/mach-s3c2410/include/mach/gpio-fns.h @@ -1,98 +1 @@ -/* arch/arm/mach-s3c2410/include/mach/gpio-fns.h - * - * Copyright (c) 2003-2009 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C2410 - hardware - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __MACH_GPIO_FNS_H -#define __MACH_GPIO_FNS_H __FILE__ - -/* These functions are in the to-be-removed category and it is strongly - * encouraged not to use these in new code. They will be marked deprecated - * very soon. - * - * Most of the functionality can be either replaced by the gpiocfg calls - * for the s3c platform or by the generic GPIOlib API. - * - * As of 2.6.35-rc, these will be removed, with the few drivers using them - * either replaced or given a wrapper until the calls can be removed. -*/ - -#include <plat/gpio-cfg.h> - -static inline void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int cfg) -{ - /* 1:1 mapping between cfgpin and setcfg calls at the moment */ - s3c_gpio_cfgpin(pin, cfg); -} - -/* external functions for GPIO support - * - * These allow various different clients to access the same GPIO - * registers without conflicting. If your driver only owns the entire - * GPIO register, then it is safe to ioremap/__raw_{read|write} to it. -*/ - -extern unsigned int s3c2410_gpio_getcfg(unsigned int pin); - -/* s3c2410_gpio_getirq - * - * turn the given pin number into the corresponding IRQ number - * - * returns: - * < 0 = no interrupt for this pin - * >=0 = interrupt number for the pin -*/ - -extern int s3c2410_gpio_getirq(unsigned int pin); - -/* s3c2410_gpio_irqfilter - * - * set the irq filtering on the given pin - * - * on = 0 => disable filtering - * 1 => enable filtering - * - * config = S3C2410_EINTFLT_PCLK or S3C2410_EINTFLT_EXTCLK orred with - * width of filter (0 through 63) - * - * -*/ - -extern int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on, - unsigned int config); - -/* s3c2410_gpio_pullup - * - * This call should be replaced with s3c_gpio_setpull(). - * - * As a note, there is currently no distinction between pull-up and pull-down - * in the s3c24xx series devices with only an on/off configuration. - */ - -/* s3c2410_gpio_pullup - * - * configure the pull-up control on the given pin - * - * to = 1 => disable the pull-up - * 0 => enable the pull-up - * - * eg; - * - * s3c2410_gpio_pullup(S3C2410_GPB(0), 0); - * s3c2410_gpio_pullup(S3C2410_GPE(8), 0); -*/ - -extern void s3c2410_gpio_pullup(unsigned int pin, unsigned int to); - -extern void s3c2410_gpio_setpin(unsigned int pin, unsigned int to); - -extern unsigned int s3c2410_gpio_getpin(unsigned int pin); - -#endif /* __MACH_GPIO_FNS_H */ +#include <plat/gpio-fns.h> diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-track.h b/arch/arm/mach-s3c2410/include/mach/gpio-track.h index d67819d..c410a07 100644 --- a/arch/arm/mach-s3c2410/include/mach/gpio-track.h +++ b/arch/arm/mach-s3c2410/include/mach/gpio-track.h @@ -17,11 +17,11 @@ #include <mach/regs-gpio.h> -extern struct s3c_gpio_chip s3c24xx_gpios[]; +extern struct samsung_gpio_chip s3c24xx_gpios[]; -static inline struct s3c_gpio_chip *s3c_gpiolib_getchip(unsigned int pin) +static inline struct samsung_gpio_chip *samsung_gpiolib_getchip(unsigned int pin) { - struct s3c_gpio_chip *chip; + struct samsung_gpio_chip *chip; if (pin > S3C_GPIO_END) return NULL; diff --git a/arch/arm/mach-s3c2410/include/mach/map.h b/arch/arm/mach-s3c2410/include/mach/map.h index 425552d..4cf495f 100644 --- a/arch/arm/mach-s3c2410/include/mach/map.h +++ b/arch/arm/mach-s3c2410/include/mach/map.h @@ -14,9 +14,53 @@ #define __ASM_ARCH_MAP_H #include <plat/map-base.h> -#include <plat/map.h> -#define S3C2410_ADDR(x) S3C_ADDR(x) +/* + * S3C2410 UART offset is 0x4000 but the other SoCs are 0x400. + * So need to define it, and here is to avoid redefinition warning. + */ +#define S3C_UART_OFFSET (0x4000) + +#include <plat/map-s3c.h> + +/* + * interrupt controller is the first thing we put in, to make + * the assembly code for the irq detection easier + */ +#define S3C2410_PA_IRQ (0x4A000000) +#define S3C24XX_SZ_IRQ SZ_1M + +/* memory controller registers */ +#define S3C2410_PA_MEMCTRL (0x48000000) +#define S3C24XX_SZ_MEMCTRL SZ_1M + +/* UARTs */ +#define S3C_VA_UARTx(uart) (S3C_VA_UART + ((uart * S3C_UART_OFFSET))) + +/* Timers */ +#define S3C2410_PA_TIMER (0x51000000) +#define S3C24XX_SZ_TIMER SZ_1M + +/* Clock and Power management */ +#define S3C24XX_SZ_CLKPWR SZ_1M + +/* USB Device port */ +#define S3C2410_PA_USBDEV (0x52000000) +#define S3C24XX_SZ_USBDEV SZ_1M + +/* Watchdog */ +#define S3C2410_PA_WATCHDOG (0x53000000) +#define S3C24XX_SZ_WATCHDOG SZ_1M + +/* Standard size definitions for peripheral blocks. */ + +#define S3C24XX_SZ_UART SZ_1M +#define S3C24XX_SZ_IIS SZ_1M +#define S3C24XX_SZ_ADC SZ_1M +#define S3C24XX_SZ_SPI SZ_1M +#define S3C24XX_SZ_SDI SZ_1M +#define S3C24XX_SZ_NAND SZ_1M +#define S3C24XX_SZ_GPIO SZ_1M /* USB host controller */ #define S3C2410_PA_USBHOST (0x49000000) @@ -75,10 +119,8 @@ /* S3C2412 memory and IO controls */ #define S3C2412_PA_SSMC (0x4F000000) -#define S3C2412_VA_SSMC S3C_ADDR_CPU(0x00000000) #define S3C2412_PA_EBI (0x48800000) -#define S3C2412_VA_EBI S3C_ADDR_CPU(0x00010000) /* physical addresses of all the chip-select areas */ @@ -100,12 +142,10 @@ #define S3C24XX_PA_DMA S3C2410_PA_DMA #define S3C24XX_PA_CLKPWR S3C2410_PA_CLKPWR #define S3C24XX_PA_LCD S3C2410_PA_LCD -#define S3C24XX_PA_UART S3C2410_PA_UART #define S3C24XX_PA_TIMER S3C2410_PA_TIMER #define S3C24XX_PA_USBDEV S3C2410_PA_USBDEV #define S3C24XX_PA_WATCHDOG S3C2410_PA_WATCHDOG #define S3C24XX_PA_IIS S3C2410_PA_IIS -#define S3C24XX_PA_GPIO S3C2410_PA_GPIO #define S3C24XX_PA_RTC S3C2410_PA_RTC #define S3C24XX_PA_ADC S3C2410_PA_ADC #define S3C24XX_PA_SPI S3C2410_PA_SPI diff --git a/arch/arm/mach-s3c2410/include/mach/pm-core.h b/arch/arm/mach-s3c2410/include/mach/pm-core.h index 45eea52..2eef7e6 100644 --- a/arch/arm/mach-s3c2410/include/mach/pm-core.h +++ b/arch/arm/mach-s3c2410/include/mach/pm-core.h @@ -64,4 +64,4 @@ static inline void s3c_pm_arch_update_uart(void __iomem *regs, } static inline void s3c_pm_restored_gpios(void) { } -static inline void s3c_pm_saved_gpios(void) { } +static inline void samsung_pm_saved_gpios(void) { } diff --git a/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h b/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h index 5e06c72..df6434f 100644 --- a/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h +++ b/arch/arm/mach-s3c2410/include/mach/regs-s3c2443-clock.h @@ -102,6 +102,7 @@ #define S3C2443_PCLKCON_UART3 (1<<3) #define S3C2443_PCLKCON_IIC (1<<4) #define S3C2443_PCLKCON_SDI (1<<5) +#define S3C2443_PCLKCON_HSSPI (1<<6) #define S3C2443_PCLKCON_ADC (1<<7) #define S3C2443_PCLKCON_AC97 (1<<8) #define S3C2443_PCLKCON_IIS (1<<9) diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c index 2a2fa06..a9201ea 100644 --- a/arch/arm/mach-s3c2410/mach-h1940.c +++ b/arch/arm/mach-s3c2410/mach-h1940.c @@ -696,9 +696,9 @@ static void __init h1940_init(void) S3C2410_MISCCR_USBSUSPND0 | S3C2410_MISCCR_USBSUSPND1, 0x0); - tmp = (0x78 << S3C24XX_PLLCON_MDIVSHIFT) - | (0x02 << S3C24XX_PLLCON_PDIVSHIFT) - | (0x03 << S3C24XX_PLLCON_SDIVSHIFT); + tmp = (0x78 << S3C24XX_PLL_MDIV_SHIFT) + | (0x02 << S3C24XX_PLL_PDIV_SHIFT) + | (0x03 << S3C24XX_PLL_SDIV_SHIFT); writel(tmp, S3C2410_UPLLCON); gpio_request(S3C2410_GPC(0), "LCD power"); diff --git a/arch/arm/mach-s3c2410/s3c2410.c b/arch/arm/mach-s3c2410/s3c2410.c index f1d3bd8..a99c2f4 100644 --- a/arch/arm/mach-s3c2410/s3c2410.c +++ b/arch/arm/mach-s3c2410/s3c2410.c @@ -72,8 +72,8 @@ void __init s3c2410_init_uarts(struct s3c2410_uartcfg *cfg, int no) void __init s3c2410_map_io(void) { - s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_1up; - s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_1up; + s3c24xx_gpiocfg_default.set_pull = s3c24xx_gpio_setpull_1up; + s3c24xx_gpiocfg_default.get_pull = s3c24xx_gpio_getpull_1up; iotable_init(s3c2410_iodesc, ARRAY_SIZE(s3c2410_iodesc)); } diff --git a/arch/arm/mach-s3c2412/Kconfig b/arch/arm/mach-s3c2412/Kconfig index c2cf4e5..b8b9029 100644 --- a/arch/arm/mach-s3c2412/Kconfig +++ b/arch/arm/mach-s3c2412/Kconfig @@ -9,7 +9,6 @@ config CPU_S3C2412 select CPU_LLSERIAL_S3C2440 select S3C2412_PM if PM select S3C2412_DMA if S3C2410_DMA - select S3C2410_GPIO help Support for the S3C2412 and S3C2413 SoCs from the S3C24XX line diff --git a/arch/arm/mach-s3c2412/Makefile b/arch/arm/mach-s3c2412/Makefile index 6c48a91..7e4d95f 100644 --- a/arch/arm/mach-s3c2412/Makefile +++ b/arch/arm/mach-s3c2412/Makefile @@ -12,7 +12,6 @@ obj- := obj-$(CONFIG_CPU_S3C2412) += s3c2412.o obj-$(CONFIG_CPU_S3C2412) += irq.o obj-$(CONFIG_CPU_S3C2412) += clock.o -obj-$(CONFIG_CPU_S3C2412) += gpio.o obj-$(CONFIG_S3C2412_DMA) += dma.o obj-$(CONFIG_S3C2412_PM) += pm.o obj-$(CONFIG_S3C2412_PM_SLEEP) += sleep.o diff --git a/arch/arm/mach-s3c2412/dma.c b/arch/arm/mach-s3c2412/dma.c index 7abecfc..d2a7d5ef 100644 --- a/arch/arm/mach-s3c2412/dma.c +++ b/arch/arm/mach-s3c2412/dma.c @@ -50,64 +50,46 @@ static struct s3c24xx_dma_map __initdata s3c2412_dma_mappings[] = { .name = "sdi", .channels = MAP(S3C2412_DMAREQSEL_SDI), .channels_rx = MAP(S3C2412_DMAREQSEL_SDI), - .hw_addr.to = S3C2410_PA_SDI + S3C2410_SDIDATA, - .hw_addr.from = S3C2410_PA_SDI + S3C2410_SDIDATA, }, [DMACH_SPI0] = { .name = "spi0", .channels = MAP(S3C2412_DMAREQSEL_SPI0TX), .channels_rx = MAP(S3C2412_DMAREQSEL_SPI0RX), - .hw_addr.to = S3C2410_PA_SPI + S3C2410_SPTDAT, - .hw_addr.from = S3C2410_PA_SPI + S3C2410_SPRDAT, }, [DMACH_SPI1] = { .name = "spi1", .channels = MAP(S3C2412_DMAREQSEL_SPI1TX), .channels_rx = MAP(S3C2412_DMAREQSEL_SPI1RX), - .hw_addr.to = S3C2410_PA_SPI + S3C2412_SPI1 + S3C2410_SPTDAT, - .hw_addr.from = S3C2410_PA_SPI + S3C2412_SPI1 + S3C2410_SPRDAT, }, [DMACH_UART0] = { .name = "uart0", .channels = MAP(S3C2412_DMAREQSEL_UART0_0), .channels_rx = MAP(S3C2412_DMAREQSEL_UART0_0), - .hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH, - .hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH, }, [DMACH_UART1] = { .name = "uart1", .channels = MAP(S3C2412_DMAREQSEL_UART1_0), .channels_rx = MAP(S3C2412_DMAREQSEL_UART1_0), - .hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH, - .hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH, }, [DMACH_UART2] = { .name = "uart2", .channels = MAP(S3C2412_DMAREQSEL_UART2_0), .channels_rx = MAP(S3C2412_DMAREQSEL_UART2_0), - .hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH, - .hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH, }, [DMACH_UART0_SRC2] = { .name = "uart0", .channels = MAP(S3C2412_DMAREQSEL_UART0_1), .channels_rx = MAP(S3C2412_DMAREQSEL_UART0_1), - .hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH, - .hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH, }, [DMACH_UART1_SRC2] = { .name = "uart1", .channels = MAP(S3C2412_DMAREQSEL_UART1_1), .channels_rx = MAP(S3C2412_DMAREQSEL_UART1_1), - .hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH, - .hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH, }, [DMACH_UART2_SRC2] = { .name = "uart2", .channels = MAP(S3C2412_DMAREQSEL_UART2_1), .channels_rx = MAP(S3C2412_DMAREQSEL_UART2_1), - .hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH, - .hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH, }, [DMACH_TIMER] = { .name = "timer", @@ -148,11 +130,11 @@ static struct s3c24xx_dma_map __initdata s3c2412_dma_mappings[] = { static void s3c2412_dma_direction(struct s3c2410_dma_chan *chan, struct s3c24xx_dma_map *map, - enum s3c2410_dmasrc dir) + enum dma_data_direction dir) { unsigned long chsel; - if (dir == S3C2410_DMASRC_HW) + if (dir == DMA_FROM_DEVICE) chsel = map->channels_rx[0]; else chsel = map->channels[0]; diff --git a/arch/arm/mach-s3c2412/gpio.c b/arch/arm/mach-s3c2412/gpio.c index 3404a87..4526f6b 100644 --- a/arch/arm/mach-s3c2412/gpio.c +++ b/arch/arm/mach-s3c2412/gpio.c @@ -28,7 +28,7 @@ int s3c2412_gpio_set_sleepcfg(unsigned int pin, unsigned int state) { - struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin); + struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin); unsigned long offs = pin - chip->chip.base; unsigned long flags; unsigned long slpcon; diff --git a/arch/arm/mach-s3c2416/Kconfig b/arch/arm/mach-s3c2416/Kconfig index 69b48a7..84c7b03 100644 --- a/arch/arm/mach-s3c2416/Kconfig +++ b/arch/arm/mach-s3c2416/Kconfig @@ -13,7 +13,6 @@ config CPU_S3C2416 select CPU_ARM926T select S3C2416_DMA if S3C2410_DMA select CPU_LLSERIAL_S3C2440 - select S3C_GPIO_PULL_UPDOWN select SAMSUNG_CLKSRC select S3C2443_CLOCK help diff --git a/arch/arm/mach-s3c2416/clock.c b/arch/arm/mach-s3c2416/clock.c index 21a5e81..72b7c62 100644 --- a/arch/arm/mach-s3c2416/clock.c +++ b/arch/arm/mach-s3c2416/clock.c @@ -21,7 +21,6 @@ #include <plat/cpu.h> #include <plat/cpu-freq.h> -#include <plat/pll6553x.h> #include <plat/pll.h> #include <asm/mach/map.h> @@ -38,6 +37,32 @@ static unsigned int armdiv[8] = { [7] = 8, }; +static struct clksrc_clk hsspi_eplldiv = { + .clk = { + .name = "hsspi-eplldiv", + .parent = &clk_esysclk.clk, + .ctrlbit = (1 << 14), + .enable = s3c2443_clkcon_enable_s, + }, + .reg_div = { .reg = S3C2443_CLKDIV1, .size = 2, .shift = 24 }, +}; + +static struct clk *hsspi_sources[] = { + [0] = &hsspi_eplldiv.clk, + [1] = NULL, /* to fix */ +}; + +static struct clksrc_clk hsspi_mux = { + .clk = { + .name = "hsspi-if", + }, + .sources = &(struct clksrc_sources) { + .sources = hsspi_sources, + .nr_sources = ARRAY_SIZE(hsspi_sources), + }, + .reg_src = { .reg = S3C2443_CLKSRC, .size = 1, .shift = 18 }, +}; + static struct clksrc_clk hsmmc_div[] = { [0] = { .clk = { @@ -114,6 +139,8 @@ void __init_or_cpufreq s3c2416_setup_clocks(void) static struct clksrc_clk *clksrcs[] __initdata = { + &hsspi_eplldiv, + &hsspi_mux, &hsmmc_div[0], &hsmmc_div[1], &hsmmc_mux[0], diff --git a/arch/arm/mach-s3c2416/s3c2416.c b/arch/arm/mach-s3c2416/s3c2416.c index 494ce91..3156b7a 100644 --- a/arch/arm/mach-s3c2416/s3c2416.c +++ b/arch/arm/mach-s3c2416/s3c2416.c @@ -118,8 +118,8 @@ void __init s3c2416_init_uarts(struct s3c2410_uartcfg *cfg, int no) void __init s3c2416_map_io(void) { - s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_updown; - s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_updown; + s3c24xx_gpiocfg_default.set_pull = samsung_gpio_setpull_updown; + s3c24xx_gpiocfg_default.get_pull = samsung_gpio_getpull_updown; /* initialize device information early */ s3c2416_default_sdhci0(); diff --git a/arch/arm/mach-s3c2416/setup-sdhci.c b/arch/arm/mach-s3c2416/setup-sdhci.c index ed34fad..cee5395 100644 --- a/arch/arm/mach-s3c2416/setup-sdhci.c +++ b/arch/arm/mach-s3c2416/setup-sdhci.c @@ -12,17 +12,7 @@ * published by the Free Software Foundation. */ -#include <linux/kernel.h> #include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/platform_device.h> -#include <linux/io.h> - -#include <linux/mmc/card.h> -#include <linux/mmc/host.h> - -#include <plat/regs-sdhci.h> -#include <plat/sdhci.h> /* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */ @@ -32,30 +22,3 @@ char *s3c2416_hsmmc_clksrcs[4] = { [2] = "hsmmc-if", /* [3] = "48m", - note not successfully used yet */ }; - -void s3c2416_setup_sdhci_cfg_card(struct platform_device *dev, - void __iomem *r, - struct mmc_ios *ios, - struct mmc_card *card) -{ - u32 ctrl2, ctrl3; - - ctrl2 = __raw_readl(r + S3C_SDHCI_CONTROL2); - ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK; - ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR | - S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK | - S3C_SDHCI_CTRL2_ENFBCLKRX | - S3C_SDHCI_CTRL2_DFCNT_NONE | - S3C_SDHCI_CTRL2_ENCLKOUTHOLD); - - if (ios->clock < 25 * 1000000) - ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 | - S3C_SDHCI_CTRL3_FCSEL2 | - S3C_SDHCI_CTRL3_FCSEL1 | - S3C_SDHCI_CTRL3_FCSEL0); - else - ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0); - - __raw_writel(ctrl2, r + S3C_SDHCI_CONTROL2); - __raw_writel(ctrl3, r + S3C_SDHCI_CONTROL3); -} diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig index 50825a3..914e620 100644 --- a/arch/arm/mach-s3c2440/Kconfig +++ b/arch/arm/mach-s3c2440/Kconfig @@ -5,10 +5,8 @@ config CPU_S3C2440 bool select CPU_ARM920T - select S3C_GPIO_PULL_UP select S3C2410_CLOCK select S3C2410_PM if PM - select S3C2410_GPIO select S3C2440_DMA if S3C2410_DMA select CPU_S3C244X select CPU_LLSERIAL_S3C2440 @@ -18,9 +16,7 @@ config CPU_S3C2440 config CPU_S3C2442 bool select CPU_ARM920T - select S3C_GPIO_PULL_DOWN select S3C2410_CLOCK - select S3C2410_GPIO select S3C2410_PM if PM select CPU_S3C244X select CPU_LLSERIAL_S3C2440 diff --git a/arch/arm/mach-s3c2440/dma.c b/arch/arm/mach-s3c2440/dma.c index 3b0529f..0e73f8f 100644 --- a/arch/arm/mach-s3c2440/dma.c +++ b/arch/arm/mach-s3c2440/dma.c @@ -48,38 +48,26 @@ static struct s3c24xx_dma_map __initdata s3c2440_dma_mappings[] = { .channels[1] = S3C2440_DCON_CH1_SDI | DMA_CH_VALID, .channels[2] = S3C2410_DCON_CH2_SDI | DMA_CH_VALID, .channels[3] = S3C2410_DCON_CH3_SDI | DMA_CH_VALID, - .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO, - .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO, }, [DMACH_SPI0] = { .name = "spi0", .channels[1] = S3C2410_DCON_CH1_SPI | DMA_CH_VALID, - .hw_addr.to = S3C2410_PA_SPI + S3C2410_SPTDAT, - .hw_addr.from = S3C2410_PA_SPI + S3C2410_SPRDAT, }, [DMACH_SPI1] = { .name = "spi1", .channels[3] = S3C2410_DCON_CH3_SPI | DMA_CH_VALID, - .hw_addr.to = S3C2410_PA_SPI + 0x20 + S3C2410_SPTDAT, - .hw_addr.from = S3C2410_PA_SPI + 0x20 + S3C2410_SPRDAT, }, [DMACH_UART0] = { .name = "uart0", .channels[0] = S3C2410_DCON_CH0_UART0 | DMA_CH_VALID, - .hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH, - .hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH, }, [DMACH_UART1] = { .name = "uart1", .channels[1] = S3C2410_DCON_CH1_UART1 | DMA_CH_VALID, - .hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH, - .hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH, }, [DMACH_UART2] = { .name = "uart2", .channels[3] = S3C2410_DCON_CH3_UART2 | DMA_CH_VALID, - .hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH, - .hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH, }, [DMACH_TIMER] = { .name = "timer", @@ -91,31 +79,26 @@ static struct s3c24xx_dma_map __initdata s3c2440_dma_mappings[] = { .name = "i2s-sdi", .channels[1] = S3C2410_DCON_CH1_I2SSDI | DMA_CH_VALID, .channels[2] = S3C2410_DCON_CH2_I2SSDI | DMA_CH_VALID, - .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO, }, [DMACH_I2S_OUT] = { .name = "i2s-sdo", .channels[0] = S3C2440_DCON_CH0_I2SSDO | DMA_CH_VALID, .channels[2] = S3C2410_DCON_CH2_I2SSDO | DMA_CH_VALID, - .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO, }, [DMACH_PCM_IN] = { .name = "pcm-in", .channels[0] = S3C2440_DCON_CH0_PCMIN | DMA_CH_VALID, .channels[2] = S3C2440_DCON_CH2_PCMIN | DMA_CH_VALID, - .hw_addr.from = S3C2440_PA_AC97 + S3C_AC97_PCM_DATA, }, [DMACH_PCM_OUT] = { .name = "pcm-out", .channels[1] = S3C2440_DCON_CH1_PCMOUT | DMA_CH_VALID, .channels[3] = S3C2440_DCON_CH3_PCMOUT | DMA_CH_VALID, - .hw_addr.to = S3C2440_PA_AC97 + S3C_AC97_PCM_DATA, }, [DMACH_MIC_IN] = { .name = "mic-in", .channels[2] = S3C2440_DCON_CH2_MICIN | DMA_CH_VALID, .channels[3] = S3C2440_DCON_CH3_MICIN | DMA_CH_VALID, - .hw_addr.from = S3C2440_PA_AC97 + S3C_AC97_MIC_DATA, }, [DMACH_USB_EP1] = { .name = "usb-ep1", diff --git a/arch/arm/mach-s3c2440/s3c2440.c b/arch/arm/mach-s3c2440/s3c2440.c index ce99ff7..fc84e481 100644 --- a/arch/arm/mach-s3c2440/s3c2440.c +++ b/arch/arm/mach-s3c2440/s3c2440.c @@ -68,6 +68,6 @@ void __init s3c2440_map_io(void) { s3c244x_map_io(); - s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_1up; - s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_1up; + s3c24xx_gpiocfg_default.set_pull = s3c24xx_gpio_setpull_1up; + s3c24xx_gpiocfg_default.get_pull = s3c24xx_gpio_getpull_1up; } diff --git a/arch/arm/mach-s3c2440/s3c2442.c b/arch/arm/mach-s3c2440/s3c2442.c index 9ad99f8..48e273c 100644 --- a/arch/arm/mach-s3c2440/s3c2442.c +++ b/arch/arm/mach-s3c2440/s3c2442.c @@ -180,6 +180,6 @@ void __init s3c2442_map_io(void) { s3c244x_map_io(); - s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_1down; - s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_1down; + s3c24xx_gpiocfg_default.set_pull = s3c24xx_gpio_setpull_1down; + s3c24xx_gpiocfg_default.get_pull = s3c24xx_gpio_getpull_1down; } diff --git a/arch/arm/mach-s3c2443/Kconfig b/arch/arm/mach-s3c2443/Kconfig index d8eb868..8814031 100644 --- a/arch/arm/mach-s3c2443/Kconfig +++ b/arch/arm/mach-s3c2443/Kconfig @@ -10,7 +10,6 @@ config CPU_S3C2443 select CPU_LLSERIAL_S3C2440 select SAMSUNG_CLKSRC select S3C2443_CLOCK - select S3C_GPIO_PULL_S3C2443 help Support for the S3C2443 SoC from the S3C24XX line diff --git a/arch/arm/mach-s3c2443/clock.c b/arch/arm/mach-s3c2443/clock.c index a1a7176..cd51d04 100644 --- a/arch/arm/mach-s3c2443/clock.c +++ b/arch/arm/mach-s3c2443/clock.c @@ -57,10 +57,6 @@ /* clock selections */ -static struct clk clk_i2s_ext = { - .name = "i2s-ext", -}; - /* armdiv * * this clock is sourced from msysclk and can have a number of @@ -128,7 +124,7 @@ static int s3c2443_armclk_setrate(struct clk *clk, unsigned long rate) unsigned long clkcon0; clkcon0 = __raw_readl(S3C2443_CLKDIV0); - clkcon0 &= S3C2443_CLKDIV0_ARMDIV_MASK; + clkcon0 &= ~S3C2443_CLKDIV0_ARMDIV_MASK; clkcon0 |= val << S3C2443_CLKDIV0_ARMDIV_SHIFT; __raw_writel(clkcon0, S3C2443_CLKDIV0); } @@ -173,7 +169,7 @@ static struct clksrc_clk clk_arm = { static struct clksrc_clk clk_hsspi = { .clk = { - .name = "hsspi", + .name = "hsspi-if", .parent = &clk_esysclk.clk, .ctrlbit = S3C2443_SCLKCON_HSSPICLK, .enable = s3c2443_clkcon_enable_s, @@ -235,48 +231,6 @@ static struct clk clk_hsmmc = { }, }; -/* i2s_eplldiv - * - * This clock is the output from the I2S divisor of ESYSCLK, and is separate - * from the mux that comes after it (cannot merge into one single clock) -*/ - -static struct clksrc_clk clk_i2s_eplldiv = { - .clk = { - .name = "i2s-eplldiv", - .parent = &clk_esysclk.clk, - }, - .reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 12, }, -}; - -/* i2s-ref - * - * i2s bus reference clock, selectable from external, esysclk or epllref - * - * Note, this used to be two clocks, but was compressed into one. -*/ - -struct clk *clk_i2s_srclist[] = { - [0] = &clk_i2s_eplldiv.clk, - [1] = &clk_i2s_ext, - [2] = &clk_epllref.clk, - [3] = &clk_epllref.clk, -}; - -static struct clksrc_clk clk_i2s = { - .clk = { - .name = "i2s-if", - .ctrlbit = S3C2443_SCLKCON_I2SCLK, - .enable = s3c2443_clkcon_enable_s, - - }, - .sources = &(struct clksrc_sources) { - .sources = clk_i2s_srclist, - .nr_sources = ARRAY_SIZE(clk_i2s_srclist), - }, - .reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 14 }, -}; - /* standard clock definitions */ static struct clk init_clocks_off[] = { @@ -286,11 +240,6 @@ static struct clk init_clocks_off[] = { .enable = s3c2443_clkcon_enable_p, .ctrlbit = S3C2443_PCLKCON_SDI, }, { - .name = "iis", - .parent = &clk_p, - .enable = s3c2443_clkcon_enable_p, - .ctrlbit = S3C2443_PCLKCON_IIS, - }, { .name = "spi", .devname = "s3c2410-spi.0", .parent = &clk_p, @@ -312,8 +261,6 @@ static struct clk init_clocks[] = { static struct clksrc_clk *clksrcs[] __initdata = { &clk_arm, - &clk_i2s_eplldiv, - &clk_i2s, &clk_hsspi, &clk_hsmmc_div, }; diff --git a/arch/arm/mach-s3c2443/dma.c b/arch/arm/mach-s3c2443/dma.c index 3f65868..fe52151 100644 --- a/arch/arm/mach-s3c2443/dma.c +++ b/arch/arm/mach-s3c2443/dma.c @@ -54,68 +54,46 @@ static struct s3c24xx_dma_map __initdata s3c2443_dma_mappings[] = { [DMACH_SDI] = { .name = "sdi", .channels = MAP(S3C2443_DMAREQSEL_SDI), - .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO, - .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO, }, [DMACH_SPI0] = { .name = "spi0", .channels = MAP(S3C2443_DMAREQSEL_SPI0TX), - .hw_addr.to = S3C2410_PA_SPI + S3C2410_SPTDAT, - .hw_addr.from = S3C2410_PA_SPI + S3C2410_SPRDAT, }, [DMACH_SPI1] = { .name = "spi1", .channels = MAP(S3C2443_DMAREQSEL_SPI1TX), - .hw_addr.to = S3C2410_PA_SPI + 0x20 + S3C2410_SPTDAT, - .hw_addr.from = S3C2410_PA_SPI + 0x20 + S3C2410_SPRDAT, }, [DMACH_UART0] = { .name = "uart0", .channels = MAP(S3C2443_DMAREQSEL_UART0_0), - .hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH, - .hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH, }, [DMACH_UART1] = { .name = "uart1", .channels = MAP(S3C2443_DMAREQSEL_UART1_0), - .hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH, - .hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH, }, [DMACH_UART2] = { .name = "uart2", .channels = MAP(S3C2443_DMAREQSEL_UART2_0), - .hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH, - .hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH, }, [DMACH_UART3] = { .name = "uart3", .channels = MAP(S3C2443_DMAREQSEL_UART3_0), - .hw_addr.to = S3C2443_PA_UART3 + S3C2410_UTXH, - .hw_addr.from = S3C2443_PA_UART3 + S3C2410_URXH, }, [DMACH_UART0_SRC2] = { .name = "uart0", .channels = MAP(S3C2443_DMAREQSEL_UART0_1), - .hw_addr.to = S3C2410_PA_UART0 + S3C2410_UTXH, - .hw_addr.from = S3C2410_PA_UART0 + S3C2410_URXH, }, [DMACH_UART1_SRC2] = { .name = "uart1", .channels = MAP(S3C2443_DMAREQSEL_UART1_1), - .hw_addr.to = S3C2410_PA_UART1 + S3C2410_UTXH, - .hw_addr.from = S3C2410_PA_UART1 + S3C2410_URXH, }, [DMACH_UART2_SRC2] = { .name = "uart2", .channels = MAP(S3C2443_DMAREQSEL_UART2_1), - .hw_addr.to = S3C2410_PA_UART2 + S3C2410_UTXH, - .hw_addr.from = S3C2410_PA_UART2 + S3C2410_URXH, }, [DMACH_UART3_SRC2] = { .name = "uart3", .channels = MAP(S3C2443_DMAREQSEL_UART3_1), - .hw_addr.to = S3C2443_PA_UART3 + S3C2410_UTXH, - .hw_addr.from = S3C2443_PA_UART3 + S3C2410_URXH, }, [DMACH_TIMER] = { .name = "timer", @@ -124,27 +102,22 @@ static struct s3c24xx_dma_map __initdata s3c2443_dma_mappings[] = { [DMACH_I2S_IN] = { .name = "i2s-sdi", .channels = MAP(S3C2443_DMAREQSEL_I2SRX), - .hw_addr.from = S3C2410_PA_IIS + S3C2410_IISFIFO, }, [DMACH_I2S_OUT] = { .name = "i2s-sdo", .channels = MAP(S3C2443_DMAREQSEL_I2STX), - .hw_addr.to = S3C2410_PA_IIS + S3C2410_IISFIFO, }, [DMACH_PCM_IN] = { .name = "pcm-in", .channels = MAP(S3C2443_DMAREQSEL_PCMIN), - .hw_addr.from = S3C2440_PA_AC97 + S3C_AC97_PCM_DATA, }, [DMACH_PCM_OUT] = { .name = "pcm-out", .channels = MAP(S3C2443_DMAREQSEL_PCMOUT), - .hw_addr.to = S3C2440_PA_AC97 + S3C_AC97_PCM_DATA, }, [DMACH_MIC_IN] = { .name = "mic-in", .channels = MAP(S3C2443_DMAREQSEL_MICIN), - .hw_addr.from = S3C2440_PA_AC97 + S3C_AC97_MIC_DATA, }, }; diff --git a/arch/arm/mach-s3c2443/s3c2443.c b/arch/arm/mach-s3c2443/s3c2443.c index e6a28ba..5df6458 100644 --- a/arch/arm/mach-s3c2443/s3c2443.c +++ b/arch/arm/mach-s3c2443/s3c2443.c @@ -90,8 +90,8 @@ void __init s3c2443_init_uarts(struct s3c2410_uartcfg *cfg, int no) void __init s3c2443_map_io(void) { - s3c24xx_gpiocfg_default.set_pull = s3c_gpio_setpull_s3c2443; - s3c24xx_gpiocfg_default.get_pull = s3c_gpio_getpull_s3c2443; + s3c24xx_gpiocfg_default.set_pull = s3c2443_gpio_setpull; + s3c24xx_gpiocfg_default.get_pull = s3c2443_gpio_getpull; iotable_init(s3c2443_iodesc, ARRAY_SIZE(s3c2443_iodesc)); } diff --git a/arch/arm/mach-s3c64xx/Kconfig b/arch/arm/mach-s3c64xx/Kconfig index f057b6a..5552e04 100644 --- a/arch/arm/mach-s3c64xx/Kconfig +++ b/arch/arm/mach-s3c64xx/Kconfig @@ -288,5 +288,6 @@ config MACH_WLF_CRAGG_6410 select S3C_DEV_RTC select S3C64XX_DEV_SPI select S3C24XX_GPIO_EXTRA128 + select I2C help Machine support for the Wolfson Cragganmore S3C6410 variant. diff --git a/arch/arm/mach-s3c64xx/Makefile b/arch/arm/mach-s3c64xx/Makefile index 61b4034..902ab9a 100644 --- a/arch/arm/mach-s3c64xx/Makefile +++ b/arch/arm/mach-s3c64xx/Makefile @@ -13,7 +13,6 @@ obj- := # Core files obj-y += cpu.o obj-y += clock.o -obj-y += gpiolib.o # Core support for S3C6400 system @@ -55,7 +54,7 @@ obj-$(CONFIG_MACH_HMT) += mach-hmt.o obj-$(CONFIG_MACH_SMARTQ) += mach-smartq.o obj-$(CONFIG_MACH_SMARTQ5) += mach-smartq5.o obj-$(CONFIG_MACH_SMARTQ7) += mach-smartq7.o -obj-$(CONFIG_MACH_WLF_CRAGG_6410) += mach-crag6410.o +obj-$(CONFIG_MACH_WLF_CRAGG_6410) += mach-crag6410.o mach-crag6410-module.o # device support diff --git a/arch/arm/mach-s3c64xx/clock.c b/arch/arm/mach-s3c64xx/clock.c index 8cf39e3..39c238d 100644 --- a/arch/arm/mach-s3c64xx/clock.c +++ b/arch/arm/mach-s3c64xx/clock.c @@ -25,13 +25,13 @@ #include <mach/regs-sys.h> #include <mach/regs-clock.h> -#include <mach/pll.h> #include <plat/cpu.h> #include <plat/devs.h> #include <plat/cpu-freq.h> #include <plat/clock.h> #include <plat/clock-clksrc.h> +#include <plat/pll.h> /* fin_apll, fin_mpll and fin_epll are all the same clock, which we call * ext_xtal_mux for want of an actual name from the manual. @@ -735,7 +735,8 @@ void __init_or_cpufreq s3c6400_setup_clocks(void) /* For now assume the mux always selects the crystal */ clk_ext_xtal_mux.parent = xtal_clk; - epll = s3c6400_get_epll(xtal); + epll = s3c_get_pll6553x(xtal, __raw_readl(S3C_EPLL_CON0), + __raw_readl(S3C_EPLL_CON1)); mpll = s3c6400_get_pll(xtal, __raw_readl(S3C_MPLL_CON)); apll = s3c6400_get_pll(xtal, __raw_readl(S3C_APLL_CON)); @@ -744,7 +745,13 @@ void __init_or_cpufreq s3c6400_setup_clocks(void) printk(KERN_INFO "S3C64XX: PLL settings, A=%ld, M=%ld, E=%ld\n", apll, mpll, epll); - hclk2 = mpll / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK2); + if(__raw_readl(S3C64XX_OTHERS) & S3C64XX_OTHERS_SYNCMUXSEL) + /* Synchronous mode */ + hclk2 = apll / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK2); + else + /* Asynchronous mode */ + hclk2 = mpll / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK2); + hclk = hclk2 / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK); pclk = hclk2 / GET_DIV(clkdiv0, S3C6400_CLKDIV0_PCLK); diff --git a/arch/arm/mach-s3c64xx/cpu.c b/arch/arm/mach-s3c64xx/cpu.c index 6c498f9..cefd7f6 100644 --- a/arch/arm/mach-s3c64xx/cpu.c +++ b/arch/arm/mach-s3c64xx/cpu.c @@ -33,8 +33,8 @@ #include <plat/devs.h> #include <plat/clock.h> -#include <mach/s3c6400.h> -#include <mach/s3c6410.h> +#include <plat/s3c6400.h> +#include <plat/s3c6410.h> /* table of supported CPUs */ diff --git a/arch/arm/mach-s3c64xx/dma.c b/arch/arm/mach-s3c64xx/dma.c index 204bfaf..17d62f4 100644 --- a/arch/arm/mach-s3c64xx/dma.c +++ b/arch/arm/mach-s3c64xx/dma.c @@ -147,14 +147,14 @@ static void s3c64xx_dma_fill_lli(struct s3c2410_dma_chan *chan, u32 control0, control1; switch (chan->source) { - case S3C2410_DMASRC_HW: + case DMA_FROM_DEVICE: src = chan->dev_addr; dst = data; control0 = PL080_CONTROL_SRC_AHB2; control0 |= PL080_CONTROL_DST_INCR; break; - case S3C2410_DMASRC_MEM: + case DMA_TO_DEVICE: src = data; dst = chan->dev_addr; control0 = PL080_CONTROL_DST_AHB2; @@ -416,7 +416,7 @@ EXPORT_SYMBOL(s3c2410_dma_enqueue); int s3c2410_dma_devconfig(enum dma_ch channel, - enum s3c2410_dmasrc source, + enum dma_data_direction source, unsigned long devaddr) { struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); @@ -437,11 +437,11 @@ int s3c2410_dma_devconfig(enum dma_ch channel, pr_debug("%s: peripheral %d\n", __func__, peripheral); switch (source) { - case S3C2410_DMASRC_HW: + case DMA_FROM_DEVICE: config = 2 << PL080_CONFIG_FLOW_CONTROL_SHIFT; config |= peripheral << PL080_CONFIG_SRC_SEL_SHIFT; break; - case S3C2410_DMASRC_MEM: + case DMA_TO_DEVICE: config = 1 << PL080_CONFIG_FLOW_CONTROL_SHIFT; config |= peripheral << PL080_CONFIG_DST_SEL_SHIFT; break; @@ -740,7 +740,7 @@ static int __init s3c64xx_dma_init(void) } /* Set all DMA configuration to be DMA, not SDMA */ - writel(0xffffff, S3C_SYSREG(0x110)); + writel(0xffffff, S3C64XX_SDMA_SEL); /* Register standard DMA controllers */ s3c64xx_dma_init1(0, DMACH_UART0, IRQ_DMA0, 0x75000000); diff --git a/arch/arm/mach-s3c64xx/gpiolib.c b/arch/arm/mach-s3c64xx/gpiolib.c deleted file mode 100644 index 92b0908..0000000 --- a/arch/arm/mach-s3c64xx/gpiolib.c +++ /dev/null @@ -1,290 +0,0 @@ -/* arch/arm/plat-s3c64xx/gpiolib.c - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * S3C64XX - GPIOlib support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/irq.h> -#include <linux/io.h> -#include <linux/gpio.h> - -#include <mach/map.h> - -#include <plat/gpio-core.h> -#include <plat/gpio-cfg.h> -#include <plat/gpio-cfg-helpers.h> -#include <mach/regs-gpio.h> - -/* GPIO bank summary: - * - * Bank GPIOs Style SlpCon ExtInt Group - * A 8 4Bit Yes 1 - * B 7 4Bit Yes 1 - * C 8 4Bit Yes 2 - * D 5 4Bit Yes 3 - * E 5 4Bit Yes None - * F 16 2Bit Yes 4 [1] - * G 7 4Bit Yes 5 - * H 10 4Bit[2] Yes 6 - * I 16 2Bit Yes None - * J 12 2Bit Yes None - * K 16 4Bit[2] No None - * L 15 4Bit[2] No None - * M 6 4Bit No IRQ_EINT - * N 16 2Bit No IRQ_EINT - * O 16 2Bit Yes 7 - * P 15 2Bit Yes 8 - * Q 9 2Bit Yes 9 - * - * [1] BANKF pins 14,15 do not form part of the external interrupt sources - * [2] BANK has two control registers, GPxCON0 and GPxCON1 - */ - -static struct s3c_gpio_cfg gpio_4bit_cfg_noint = { - .set_config = s3c_gpio_setcfg_s3c64xx_4bit, - .get_config = s3c_gpio_getcfg_s3c64xx_4bit, - .set_pull = s3c_gpio_setpull_updown, - .get_pull = s3c_gpio_getpull_updown, -}; - -static struct s3c_gpio_cfg gpio_4bit_cfg_eint0111 = { - .cfg_eint = 7, - .set_config = s3c_gpio_setcfg_s3c64xx_4bit, - .get_config = s3c_gpio_getcfg_s3c64xx_4bit, - .set_pull = s3c_gpio_setpull_updown, - .get_pull = s3c_gpio_getpull_updown, -}; - -static struct s3c_gpio_cfg gpio_4bit_cfg_eint0011 = { - .cfg_eint = 3, - .get_config = s3c_gpio_getcfg_s3c64xx_4bit, - .set_config = s3c_gpio_setcfg_s3c64xx_4bit, - .set_pull = s3c_gpio_setpull_updown, - .get_pull = s3c_gpio_getpull_updown, -}; - -static int s3c64xx_gpio2int_gpm(struct gpio_chip *chip, unsigned pin) -{ - return pin < 5 ? IRQ_EINT(23) + pin : -ENXIO; -} - -static struct s3c_gpio_chip gpio_4bit[] = { - { - .base = S3C64XX_GPA_BASE, - .config = &gpio_4bit_cfg_eint0111, - .chip = { - .base = S3C64XX_GPA(0), - .ngpio = S3C64XX_GPIO_A_NR, - .label = "GPA", - }, - }, { - .base = S3C64XX_GPB_BASE, - .config = &gpio_4bit_cfg_eint0111, - .chip = { - .base = S3C64XX_GPB(0), - .ngpio = S3C64XX_GPIO_B_NR, - .label = "GPB", - }, - }, { - .base = S3C64XX_GPC_BASE, - .config = &gpio_4bit_cfg_eint0111, - .chip = { - .base = S3C64XX_GPC(0), - .ngpio = S3C64XX_GPIO_C_NR, - .label = "GPC", - }, - }, { - .base = S3C64XX_GPD_BASE, - .config = &gpio_4bit_cfg_eint0111, - .chip = { - .base = S3C64XX_GPD(0), - .ngpio = S3C64XX_GPIO_D_NR, - .label = "GPD", - }, - }, { - .base = S3C64XX_GPE_BASE, - .config = &gpio_4bit_cfg_noint, - .chip = { - .base = S3C64XX_GPE(0), - .ngpio = S3C64XX_GPIO_E_NR, - .label = "GPE", - }, - }, { - .base = S3C64XX_GPG_BASE, - .config = &gpio_4bit_cfg_eint0111, - .chip = { - .base = S3C64XX_GPG(0), - .ngpio = S3C64XX_GPIO_G_NR, - .label = "GPG", - }, - }, { - .base = S3C64XX_GPM_BASE, - .config = &gpio_4bit_cfg_eint0011, - .chip = { - .base = S3C64XX_GPM(0), - .ngpio = S3C64XX_GPIO_M_NR, - .label = "GPM", - .to_irq = s3c64xx_gpio2int_gpm, - }, - }, -}; - -static int s3c64xx_gpio2int_gpl(struct gpio_chip *chip, unsigned pin) -{ - return pin >= 8 ? IRQ_EINT(16) + pin - 8 : -ENXIO; -} - -static struct s3c_gpio_chip gpio_4bit2[] = { - { - .base = S3C64XX_GPH_BASE + 0x4, - .config = &gpio_4bit_cfg_eint0111, - .chip = { - .base = S3C64XX_GPH(0), - .ngpio = S3C64XX_GPIO_H_NR, - .label = "GPH", - }, - }, { - .base = S3C64XX_GPK_BASE + 0x4, - .config = &gpio_4bit_cfg_noint, - .chip = { - .base = S3C64XX_GPK(0), - .ngpio = S3C64XX_GPIO_K_NR, - .label = "GPK", - }, - }, { - .base = S3C64XX_GPL_BASE + 0x4, - .config = &gpio_4bit_cfg_eint0011, - .chip = { - .base = S3C64XX_GPL(0), - .ngpio = S3C64XX_GPIO_L_NR, - .label = "GPL", - .to_irq = s3c64xx_gpio2int_gpl, - }, - }, -}; - -static struct s3c_gpio_cfg gpio_2bit_cfg_noint = { - .set_config = s3c_gpio_setcfg_s3c24xx, - .get_config = s3c_gpio_getcfg_s3c24xx, - .set_pull = s3c_gpio_setpull_updown, - .get_pull = s3c_gpio_getpull_updown, -}; - -static struct s3c_gpio_cfg gpio_2bit_cfg_eint10 = { - .cfg_eint = 2, - .set_config = s3c_gpio_setcfg_s3c24xx, - .get_config = s3c_gpio_getcfg_s3c24xx, - .set_pull = s3c_gpio_setpull_updown, - .get_pull = s3c_gpio_getpull_updown, -}; - -static struct s3c_gpio_cfg gpio_2bit_cfg_eint11 = { - .cfg_eint = 3, - .set_config = s3c_gpio_setcfg_s3c24xx, - .get_config = s3c_gpio_getcfg_s3c24xx, - .set_pull = s3c_gpio_setpull_updown, - .get_pull = s3c_gpio_getpull_updown, -}; - -static struct s3c_gpio_chip gpio_2bit[] = { - { - .base = S3C64XX_GPF_BASE, - .config = &gpio_2bit_cfg_eint11, - .chip = { - .base = S3C64XX_GPF(0), - .ngpio = S3C64XX_GPIO_F_NR, - .label = "GPF", - }, - }, { - .base = S3C64XX_GPI_BASE, - .config = &gpio_2bit_cfg_noint, - .chip = { - .base = S3C64XX_GPI(0), - .ngpio = S3C64XX_GPIO_I_NR, - .label = "GPI", - }, - }, { - .base = S3C64XX_GPJ_BASE, - .config = &gpio_2bit_cfg_noint, - .chip = { - .base = S3C64XX_GPJ(0), - .ngpio = S3C64XX_GPIO_J_NR, - .label = "GPJ", - }, - }, { - .base = S3C64XX_GPN_BASE, - .irq_base = IRQ_EINT(0), - .config = &gpio_2bit_cfg_eint10, - .chip = { - .base = S3C64XX_GPN(0), - .ngpio = S3C64XX_GPIO_N_NR, - .label = "GPN", - .to_irq = samsung_gpiolib_to_irq, - }, - }, { - .base = S3C64XX_GPO_BASE, - .config = &gpio_2bit_cfg_eint11, - .chip = { - .base = S3C64XX_GPO(0), - .ngpio = S3C64XX_GPIO_O_NR, - .label = "GPO", - }, - }, { - .base = S3C64XX_GPP_BASE, - .config = &gpio_2bit_cfg_eint11, - .chip = { - .base = S3C64XX_GPP(0), - .ngpio = S3C64XX_GPIO_P_NR, - .label = "GPP", - }, - }, { - .base = S3C64XX_GPQ_BASE, - .config = &gpio_2bit_cfg_eint11, - .chip = { - .base = S3C64XX_GPQ(0), - .ngpio = S3C64XX_GPIO_Q_NR, - .label = "GPQ", - }, - }, -}; - -static __init void s3c64xx_gpiolib_add_2bit(struct s3c_gpio_chip *chip) -{ - chip->pm = __gpio_pm(&s3c_gpio_pm_2bit); -} - -static __init void s3c64xx_gpiolib_add(struct s3c_gpio_chip *chips, - int nr_chips, - void (*fn)(struct s3c_gpio_chip *)) -{ - for (; nr_chips > 0; nr_chips--, chips++) { - if (fn) - (fn)(chips); - s3c_gpiolib_add(chips); - } -} - -static __init int s3c64xx_gpiolib_init(void) -{ - s3c64xx_gpiolib_add(gpio_4bit, ARRAY_SIZE(gpio_4bit), - samsung_gpiolib_add_4bit); - - s3c64xx_gpiolib_add(gpio_4bit2, ARRAY_SIZE(gpio_4bit2), - samsung_gpiolib_add_4bit2); - - s3c64xx_gpiolib_add(gpio_2bit, ARRAY_SIZE(gpio_2bit), - s3c64xx_gpiolib_add_2bit); - - return 0; -} - -core_initcall(s3c64xx_gpiolib_init); diff --git a/arch/arm/mach-s3c64xx/include/mach/clkdev.h b/arch/arm/mach-s3c64xx/include/mach/clkdev.h deleted file mode 100644 index 7dffa83..0000000 --- a/arch/arm/mach-s3c64xx/include/mach/clkdev.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef __MACH_CLKDEV_H__ -#define __MACH_CLKDEV_H__ - -#define __clk_get(clk) ({ 1; }) -#define __clk_put(clk) do {} while (0) - -#endif diff --git a/arch/arm/mach-s3c64xx/include/mach/crag6410.h b/arch/arm/mach-s3c64xx/include/mach/crag6410.h new file mode 100644 index 0000000..be9074e --- /dev/null +++ b/arch/arm/mach-s3c64xx/include/mach/crag6410.h @@ -0,0 +1,23 @@ +/* Cragganmore 6410 shared definitions + * + * Copyright 2011 Wolfson Microelectronics plc + * Mark Brown <broonie@opensource.wolfsonmicro.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef MACH_CRAG6410_H +#define MACH_CRAG6410_H + +#include <linux/gpio.h> + +#define BANFF_PMIC_IRQ_BASE IRQ_BOARD_START +#define GLENFARCLAS_PMIC_IRQ_BASE (IRQ_BOARD_START + 64) + +#define PCA935X_GPIO_BASE GPIO_BOARD_START +#define CODEC_GPIO_BASE (GPIO_BOARD_START + 8) +#define GLENFARCLAS_PMIC_GPIO_BASE (GPIO_BOARD_START + 16) + +#endif diff --git a/arch/arm/mach-s3c64xx/include/mach/dma.h b/arch/arm/mach-s3c64xx/include/mach/dma.h index 0a5d926..fe1a98c 100644 --- a/arch/arm/mach-s3c64xx/include/mach/dma.h +++ b/arch/arm/mach-s3c64xx/include/mach/dma.h @@ -58,11 +58,15 @@ enum dma_ch { DMACH_MAX /* the end */ }; -static __inline__ bool s3c_dma_has_circular(void) +static inline bool samsung_dma_has_circular(void) { return true; } +static inline bool samsung_dma_is_dmadev(void) +{ + return false; +} #define S3C2410_DMAF_CIRCULAR (1 << 0) #include <plat/dma.h> @@ -95,7 +99,7 @@ struct s3c2410_dma_chan { unsigned char peripheral; unsigned int flags; - enum s3c2410_dmasrc source; + enum dma_data_direction source; dma_addr_t dev_addr; diff --git a/arch/arm/mach-s3c64xx/include/mach/map.h b/arch/arm/mach-s3c64xx/include/mach/map.h index a1f13f0..23a1d71 100644 --- a/arch/arm/mach-s3c64xx/include/mach/map.h +++ b/arch/arm/mach-s3c64xx/include/mach/map.h @@ -16,6 +16,7 @@ #define __ASM_ARCH_MAP_H __FILE__ #include <plat/map-base.h> +#include <plat/map-s3c.h> /* * Post-mux Chip Select Regions Xm0CSn_ @@ -83,7 +84,6 @@ #define S3C64XX_PA_IIC1 (0x7F00F000) #define S3C64XX_PA_GPIO (0x7F008000) -#define S3C64XX_VA_GPIO S3C_ADDR_CPU(0x00000000) #define S3C64XX_SZ_GPIO SZ_4K #define S3C64XX_PA_SDRAM (0x50000000) @@ -94,16 +94,10 @@ #define S3C64XX_PA_VIC1 (0x71300000) #define S3C64XX_PA_MODEM (0x74108000) -#define S3C64XX_VA_MODEM S3C_ADDR_CPU(0x00100000) #define S3C64XX_PA_USBHOST (0x74300000) #define S3C64XX_PA_USB_HSPHY (0x7C100000) -#define S3C64XX_VA_USB_HSPHY S3C_ADDR_CPU(0x00200000) - -/* place VICs close together */ -#define VA_VIC0 (S3C_VA_IRQ + 0x00) -#define VA_VIC1 (S3C_VA_IRQ + 0x10000) /* compatibiltiy defines. */ #define S3C_PA_TIMER S3C64XX_PA_TIMER @@ -119,7 +113,6 @@ #define S3C_PA_FB S3C64XX_PA_FB #define S3C_PA_USBHOST S3C64XX_PA_USBHOST #define S3C_PA_USB_HSOTG S3C64XX_PA_USB_HSOTG -#define S3C_VA_USB_HSPHY S3C64XX_VA_USB_HSPHY #define S3C_PA_RTC S3C64XX_PA_RTC #define S3C_PA_WDT S3C64XX_PA_WATCHDOG diff --git a/arch/arm/mach-s3c64xx/include/mach/pll.h b/arch/arm/mach-s3c64xx/include/mach/pll.h deleted file mode 100644 index 5ef0bb6..0000000 --- a/arch/arm/mach-s3c64xx/include/mach/pll.h +++ /dev/null @@ -1,45 +0,0 @@ -/* arch/arm/plat-s3c64xx/include/plat/pll.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * S3C64XX PLL code - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#define S3C6400_PLL_MDIV_MASK ((1 << (25-16+1)) - 1) -#define S3C6400_PLL_PDIV_MASK ((1 << (13-8+1)) - 1) -#define S3C6400_PLL_SDIV_MASK ((1 << (2-0+1)) - 1) -#define S3C6400_PLL_MDIV_SHIFT (16) -#define S3C6400_PLL_PDIV_SHIFT (8) -#define S3C6400_PLL_SDIV_SHIFT (0) - -#include <asm/div64.h> -#include <plat/pll6553x.h> - -static inline unsigned long s3c6400_get_pll(unsigned long baseclk, - u32 pllcon) -{ - u32 mdiv, pdiv, sdiv; - u64 fvco = baseclk; - - mdiv = (pllcon >> S3C6400_PLL_MDIV_SHIFT) & S3C6400_PLL_MDIV_MASK; - pdiv = (pllcon >> S3C6400_PLL_PDIV_SHIFT) & S3C6400_PLL_PDIV_MASK; - sdiv = (pllcon >> S3C6400_PLL_SDIV_SHIFT) & S3C6400_PLL_SDIV_MASK; - - fvco *= mdiv; - do_div(fvco, (pdiv << sdiv)); - - return (unsigned long)fvco; -} - -static inline unsigned long s3c6400_get_epll(unsigned long baseclk) -{ - return s3c_get_pll6553x(baseclk, __raw_readl(S3C_EPLL_CON0), - __raw_readl(S3C_EPLL_CON1)); -} diff --git a/arch/arm/mach-s3c64xx/include/mach/pm-core.h b/arch/arm/mach-s3c64xx/include/mach/pm-core.h index 38659be..fcf3dca 100644 --- a/arch/arm/mach-s3c64xx/include/mach/pm-core.h +++ b/arch/arm/mach-s3c64xx/include/mach/pm-core.h @@ -104,7 +104,7 @@ static inline void s3c_pm_restored_gpios(void) __raw_writel(0, S3C64XX_SLPEN); } -static inline void s3c_pm_saved_gpios(void) +static inline void samsung_pm_saved_gpios(void) { /* turn on the sleep mode and keep it there, as it seems that during * suspend the xCON registers get re-set and thus you can end up with diff --git a/arch/arm/mach-s3c64xx/include/mach/pwm-clock.h b/arch/arm/mach-s3c64xx/include/mach/pwm-clock.h deleted file mode 100644 index b25bede..0000000 --- a/arch/arm/mach-s3c64xx/include/mach/pwm-clock.h +++ /dev/null @@ -1,56 +0,0 @@ -/* linux/arch/arm/mach-s3c6400/include/mach/pwm-clock.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * S3C64xx - pwm clock and timer support - */ - -/** - * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk - * @tcfg: The timer TCFG1 register bits shifted down to 0. - * - * Return true if the given configuration from TCFG1 is a TCLK instead - * any of the TDIV clocks. - */ -static inline int pwm_cfg_src_is_tclk(unsigned long tcfg) -{ - return tcfg >= S3C64XX_TCFG1_MUX_TCLK; -} - -/** - * tcfg_to_divisor() - convert tcfg1 setting to a divisor - * @tcfg1: The tcfg1 setting, shifted down. - * - * Get the divisor value for the given tcfg1 setting. We assume the - * caller has already checked to see if this is not a TCLK source. - */ -static inline unsigned long tcfg_to_divisor(unsigned long tcfg1) -{ - return 1 << tcfg1; -} - -/** - * pwm_tdiv_has_div1() - does the tdiv setting have a /1 - * - * Return true if we have a /1 in the tdiv setting. - */ -static inline unsigned int pwm_tdiv_has_div1(void) -{ - return 1; -} - -/** - * pwm_tdiv_div_bits() - calculate TCFG1 divisor value. - * @div: The divisor to calculate the bit information for. - * - * Turn a divisor into the necessary bit field for TCFG1. - */ -static inline unsigned long pwm_tdiv_div_bits(unsigned int div) -{ - return ilog2(div); -} - -#define S3C_TCFG1_MUX_TCLK S3C64XX_TCFG1_MUX_TCLK diff --git a/arch/arm/mach-s3c64xx/include/mach/regs-sys.h b/arch/arm/mach-s3c64xx/include/mach/regs-sys.h index 69b78d9..b91e020 100644 --- a/arch/arm/mach-s3c64xx/include/mach/regs-sys.h +++ b/arch/arm/mach-s3c64xx/include/mach/regs-sys.h @@ -21,8 +21,11 @@ #define S3C64XX_AHB_CON1 S3C_SYSREG(0x104) #define S3C64XX_AHB_CON2 S3C_SYSREG(0x108) +#define S3C64XX_SDMA_SEL S3C_SYSREG(0x110) + #define S3C64XX_OTHERS S3C_SYSREG(0x900) #define S3C64XX_OTHERS_USBMASK (1 << 16) +#define S3C64XX_OTHERS_SYNCMUXSEL (1 << 6) #endif /* _PLAT_REGS_SYS_H */ diff --git a/arch/arm/mach-s3c64xx/mach-anw6410.c b/arch/arm/mach-s3c64xx/mach-anw6410.c index cb88643..d2a68d2 100644 --- a/arch/arm/mach-s3c64xx/mach-anw6410.c +++ b/arch/arm/mach-s3c64xx/mach-anw6410.c @@ -45,7 +45,7 @@ #include <plat/fb.h> #include <plat/regs-fb-v4.h> -#include <mach/s3c6410.h> +#include <plat/s3c6410.h> #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> diff --git a/arch/arm/mach-s3c64xx/mach-crag6410-module.c b/arch/arm/mach-s3c64xx/mach-crag6410-module.c new file mode 100644 index 0000000..6666856 --- /dev/null +++ b/arch/arm/mach-s3c64xx/mach-crag6410-module.c @@ -0,0 +1,182 @@ +/* Speyside modules for Cragganmore - board data probing + * + * Copyright 2011 Wolfson Microelectronics plc + * Mark Brown <broonie@opensource.wolfsonmicro.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/i2c.h> + +#include <linux/mfd/wm831x/irq.h> +#include <linux/mfd/wm831x/gpio.h> + +#include <sound/wm8996.h> +#include <sound/wm8962.h> +#include <sound/wm9081.h> + +#include <mach/crag6410.h> + +static struct wm8996_retune_mobile_config wm8996_retune[] = { + { + .name = "Sub LPF", + .rate = 48000, + .regs = { + 0x6318, 0x6300, 0x1000, 0x0000, 0x0004, 0x2000, 0xF000, + 0x0000, 0x0004, 0x2000, 0xF000, 0x0000, 0x0004, 0x2000, + 0xF000, 0x0000, 0x0004, 0x1000, 0x0800, 0x4000 + }, + }, + { + .name = "Sub HPF", + .rate = 48000, + .regs = { + 0x000A, 0x6300, 0x1000, 0x0000, 0x0004, 0x2000, 0xF000, + 0x0000, 0x0004, 0x2000, 0xF000, 0x0000, 0x0004, 0x2000, + 0xF000, 0x0000, 0x0004, 0x1000, 0x0800, 0x4000 + }, + }, +}; + +static struct wm8996_pdata wm8996_pdata __initdata = { + .ldo_ena = S3C64XX_GPN(7), + .gpio_base = CODEC_GPIO_BASE, + .micdet_def = 1, + .inl_mode = WM8996_DIFFERRENTIAL_1, + .inr_mode = WM8996_DIFFERRENTIAL_1, + + .irq_flags = IRQF_TRIGGER_RISING, + + .gpio_default = { + 0x8001, /* GPIO1 == ADCLRCLK1 */ + 0x8001, /* GPIO2 == ADCLRCLK2, input due to CPU */ + 0x0141, /* GPIO3 == HP_SEL */ + 0x0002, /* GPIO4 == IRQ */ + 0x020e, /* GPIO5 == CLKOUT */ + }, + + .retune_mobile_cfgs = wm8996_retune, + .num_retune_mobile_cfgs = ARRAY_SIZE(wm8996_retune), +}; + +static struct wm8962_pdata wm8962_pdata __initdata = { + .gpio_init = { + 0, + WM8962_GPIO_FN_OPCLK, + WM8962_GPIO_FN_DMICCLK, + 0, + 0x8000 | WM8962_GPIO_FN_DMICDAT, + WM8962_GPIO_FN_IRQ, /* Open drain mode */ + }, + .irq_active_low = true, +}; + +static struct wm9081_pdata wm9081_pdata __initdata = { + .irq_high = false, + .irq_cmos = false, +}; + +static const struct i2c_board_info wm1254_devs[] = { + { I2C_BOARD_INFO("wm8996", 0x1a), + .platform_data = &wm8996_pdata, + .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2, + }, + { I2C_BOARD_INFO("wm9081", 0x6c), + .platform_data = &wm9081_pdata, }, +}; + +static const struct i2c_board_info wm1255_devs[] = { + { I2C_BOARD_INFO("wm5100", 0x1a), + .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2, + }, + { I2C_BOARD_INFO("wm9081", 0x6c), + .platform_data = &wm9081_pdata, }, +}; + +static const struct i2c_board_info wm1259_devs[] = { + { I2C_BOARD_INFO("wm8962", 0x1a), + .platform_data = &wm8962_pdata, + .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2, + }, +}; + + +static __devinitdata const struct { + u8 id; + const char *name; + const struct i2c_board_info *i2c_devs; + int num_i2c_devs; +} gf_mods[] = { + { .id = 0x01, .name = "1250-EV1 Springbank" }, + { .id = 0x02, .name = "1251-EV1 Jura" }, + { .id = 0x03, .name = "1252-EV1 Glenlivet" }, + { .id = 0x11, .name = "6249-EV2 Glenfarclas", }, + { .id = 0x21, .name = "1275-EV1 Mortlach" }, + { .id = 0x25, .name = "1274-EV1 Glencadam" }, + { .id = 0x31, .name = "1253-EV1 Tomatin", }, + { .id = 0x39, .name = "1254-EV1 Dallas Dhu", + .i2c_devs = wm1254_devs, .num_i2c_devs = ARRAY_SIZE(wm1254_devs) }, + { .id = 0x3a, .name = "1259-EV1 Tobermory", + .i2c_devs = wm1259_devs, .num_i2c_devs = ARRAY_SIZE(wm1259_devs) }, + { .id = 0x3b, .name = "1255-EV1 Kilchoman", + .i2c_devs = wm1255_devs, .num_i2c_devs = ARRAY_SIZE(wm1255_devs) }, + { .id = 0x3c, .name = "1273-EV1 Longmorn" }, +}; + +static __devinit int wlf_gf_module_probe(struct i2c_client *i2c, + const struct i2c_device_id *i2c_id) +{ + int ret, i, j, id, rev; + + ret = i2c_smbus_read_byte_data(i2c, 0); + if (ret < 0) { + dev_err(&i2c->dev, "Failed to read ID: %d\n", ret); + return ret; + } + + id = (ret & 0xfe) >> 2; + rev = ret & 0x3; + for (i = 0; i < ARRAY_SIZE(gf_mods); i++) + if (id == gf_mods[i].id) + break; + + if (i < ARRAY_SIZE(gf_mods)) { + dev_info(&i2c->dev, "%s revision %d\n", + gf_mods[i].name, rev + 1); + for (j = 0; j < gf_mods[i].num_i2c_devs; j++) { + if (!i2c_new_device(i2c->adapter, + &(gf_mods[i].i2c_devs[j]))) + dev_err(&i2c->dev, + "Failed to register dev: %d\n", ret); + } + } else { + dev_warn(&i2c->dev, "Unknown module ID %d revision %d\n", + id, rev); + } + + return 0; +} + +static const struct i2c_device_id wlf_gf_module_id[] = { + { "wlf-gf-module", 0 }, + { } +}; + +static struct i2c_driver wlf_gf_module_driver = { + .driver = { + .name = "wlf-gf-module", + .owner = THIS_MODULE, + }, + .probe = wlf_gf_module_probe, + .id_table = wlf_gf_module_id, +}; + +static int __init wlf_gf_module_register(void) +{ + return i2c_add_driver(&wlf_gf_module_driver); +} +module_init(wlf_gf_module_register); diff --git a/arch/arm/mach-s3c64xx/mach-crag6410.c b/arch/arm/mach-s3c64xx/mach-crag6410.c index af0c2fe..fb3d9cd 100644 --- a/arch/arm/mach-s3c64xx/mach-crag6410.c +++ b/arch/arm/mach-s3c64xx/mach-crag6410.c @@ -43,13 +43,14 @@ #include <mach/hardware.h> #include <mach/map.h> -#include <mach/s3c6410.h> #include <mach/regs-sys.h> #include <mach/regs-gpio.h> #include <mach/regs-modem.h> +#include <mach/crag6410.h> #include <mach/regs-gpio-memport.h> +#include <plat/s3c6410.h> #include <plat/regs-serial.h> #include <plat/regs-fb-v4.h> #include <plat/fb.h> @@ -65,17 +66,6 @@ #include <plat/iic.h> #include <plat/pm.h> -#include <sound/wm8996.h> -#include <sound/wm8962.h> -#include <sound/wm9081.h> - -#define BANFF_PMIC_IRQ_BASE IRQ_BOARD_START -#define GLENFARCLAS_PMIC_IRQ_BASE (IRQ_BOARD_START + 64) - -#define PCA935X_GPIO_BASE GPIO_BOARD_START -#define CODEC_GPIO_BASE (GPIO_BOARD_START + 8) -#define GLENFARCLAS_PMIC_GPIO_BASE (GPIO_BOARD_START + 16) - /* serial port setup */ #define UCON (S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK) @@ -287,6 +277,11 @@ static struct platform_device speyside_device = { .id = -1, }; +static struct platform_device lowland_device = { + .name = "lowland", + .id = -1, +}; + static struct platform_device speyside_wm8962_device = { .name = "speyside-wm8962", .id = -1, @@ -295,6 +290,8 @@ static struct platform_device speyside_wm8962_device = { static struct regulator_consumer_supply wallvdd_consumers[] = { REGULATOR_SUPPLY("SPKVDD1", "1-001a"), REGULATOR_SUPPLY("SPKVDD2", "1-001a"), + REGULATOR_SUPPLY("SPKVDDL", "1-001a"), + REGULATOR_SUPPLY("SPKVDDR", "1-001a"), }; static struct regulator_init_data wallvdd_data = { @@ -329,9 +326,6 @@ static struct platform_device *crag6410_devices[] __initdata = { &s3c_device_fb, &s3c_device_ohci, &s3c_device_usb_hsotg, - &s3c_device_adc, - &s3c_device_rtc, - &s3c_device_ts, &s3c_device_timer[0], &s3c64xx_device_iis0, &s3c64xx_device_iis1, @@ -345,6 +339,7 @@ static struct platform_device *crag6410_devices[] __initdata = { &crag6410_backlight_device, &speyside_device, &speyside_wm8962_device, + &lowland_device, &wallvdd_device, }; @@ -353,6 +348,12 @@ static struct pca953x_platform_data crag6410_pca_data = { .irq_base = 0, }; +/* VDDARM is controlled by DVS1 connected to GPK(0) */ +static struct wm831x_buckv_pdata vddarm_pdata = { + .dvs_control_src = 1, + .dvs_gpio = S3C64XX_GPK(0), +}; + static struct regulator_consumer_supply vddarm_consumers[] __initdata = { REGULATOR_SUPPLY("vddarm", NULL), }; @@ -368,6 +369,7 @@ static struct regulator_init_data vddarm __initdata = { .num_consumer_supplies = ARRAY_SIZE(vddarm_consumers), .consumer_supplies = vddarm_consumers, .supply_regulator = "WALLVDD", + .driver_data = &vddarm_pdata, }; static struct regulator_init_data vddint __initdata = { @@ -503,6 +505,8 @@ static struct wm831x_pdata crag_pmic_pdata __initdata = { .backup = &banff_backup_pdata, .gpio_defaults = { + /* GPIO5: DVS1_REQ - CMOS, DBVDD, active high */ + [4] = WM831X_GPN_DIR | WM831X_GPN_POL | WM831X_GPN_ENA | 0x8, /* GPIO11: Touchscreen data - CMOS, DBVDD, active high*/ [10] = WM831X_GPN_POL | WM831X_GPN_ENA | 0x6, /* GPIO12: Touchscreen pen down - CMOS, DBVDD, active high*/ @@ -560,8 +564,12 @@ static struct regulator_init_data pvdd_1v2 __initdata = { }; static struct regulator_consumer_supply pvdd_1v8_consumers[] __initdata = { + REGULATOR_SUPPLY("LDOVDD", "1-001a"), REGULATOR_SUPPLY("PLLVDD", "1-001a"), REGULATOR_SUPPLY("DBVDD", "1-001a"), + REGULATOR_SUPPLY("DBVDD1", "1-001a"), + REGULATOR_SUPPLY("DBVDD2", "1-001a"), + REGULATOR_SUPPLY("DBVDD3", "1-001a"), REGULATOR_SUPPLY("CPVDD", "1-001a"), REGULATOR_SUPPLY("AVDD2", "1-001a"), REGULATOR_SUPPLY("DCVDD", "1-001a"), @@ -614,81 +622,16 @@ static struct wm831x_pdata glenfarclas_pmic_pdata __initdata = { .disable_touch = true, }; -static struct wm8996_retune_mobile_config wm8996_retune[] = { - { - .name = "Sub LPF", - .rate = 48000, - .regs = { - 0x6318, 0x6300, 0x1000, 0x0000, 0x0004, 0x2000, 0xF000, - 0x0000, 0x0004, 0x2000, 0xF000, 0x0000, 0x0004, 0x2000, - 0xF000, 0x0000, 0x0004, 0x1000, 0x0800, 0x4000 - }, - }, - { - .name = "Sub HPF", - .rate = 48000, - .regs = { - 0x000A, 0x6300, 0x1000, 0x0000, 0x0004, 0x2000, 0xF000, - 0x0000, 0x0004, 0x2000, 0xF000, 0x0000, 0x0004, 0x2000, - 0xF000, 0x0000, 0x0004, 0x1000, 0x0800, 0x4000 - }, - }, -}; - -static struct wm8996_pdata wm8996_pdata __initdata = { - .ldo_ena = S3C64XX_GPN(7), - .gpio_base = CODEC_GPIO_BASE, - .micdet_def = 1, - .inl_mode = WM8996_DIFFERRENTIAL_1, - .inr_mode = WM8996_DIFFERRENTIAL_1, - - .irq_flags = IRQF_TRIGGER_RISING, - - .gpio_default = { - 0x8001, /* GPIO1 == ADCLRCLK1 */ - 0x8001, /* GPIO2 == ADCLRCLK2, input due to CPU */ - 0x0141, /* GPIO3 == HP_SEL */ - 0x0002, /* GPIO4 == IRQ */ - 0x020e, /* GPIO5 == CLKOUT */ - }, - - .retune_mobile_cfgs = wm8996_retune, - .num_retune_mobile_cfgs = ARRAY_SIZE(wm8996_retune), -}; - -static struct wm8962_pdata wm8962_pdata __initdata = { - .gpio_init = { - 0, - WM8962_GPIO_FN_OPCLK, - WM8962_GPIO_FN_DMICCLK, - 0, - 0x8000 | WM8962_GPIO_FN_DMICDAT, - WM8962_GPIO_FN_IRQ, /* Open drain mode */ - }, - .irq_active_low = true, -}; - -static struct wm9081_pdata wm9081_pdata __initdata = { - .irq_high = false, - .irq_cmos = false, -}; - static struct i2c_board_info i2c_devs1[] __initdata = { { I2C_BOARD_INFO("wm8311", 0x34), .irq = S3C_EINT(0), .platform_data = &glenfarclas_pmic_pdata }, + { I2C_BOARD_INFO("wlf-gf-module", 0x24) }, + { I2C_BOARD_INFO("wlf-gf-module", 0x25) }, + { I2C_BOARD_INFO("wlf-gf-module", 0x26) }, + { I2C_BOARD_INFO("wm1250-ev1", 0x27) }, - { I2C_BOARD_INFO("wm8996", 0x1a), - .platform_data = &wm8996_pdata, - .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2, - }, - { I2C_BOARD_INFO("wm9081", 0x6c), - .platform_data = &wm9081_pdata, }, - { I2C_BOARD_INFO("wm8962", 0x1a), - .platform_data = &wm8962_pdata, - .irq = GLENFARCLAS_PMIC_IRQ_BASE + WM831X_IRQ_GPIO_2, - }, }; static void __init crag6410_map_io(void) diff --git a/arch/arm/mach-s3c64xx/mach-hmt.c b/arch/arm/mach-s3c64xx/mach-hmt.c index b3d93cc..61f4fde 100644 --- a/arch/arm/mach-s3c64xx/mach-hmt.c +++ b/arch/arm/mach-s3c64xx/mach-hmt.c @@ -37,7 +37,7 @@ #include <plat/fb.h> #include <plat/nand.h> -#include <mach/s3c6410.h> +#include <plat/s3c6410.h> #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> diff --git a/arch/arm/mach-s3c64xx/mach-mini6410.c b/arch/arm/mach-s3c64xx/mach-mini6410.c index 527f49b..5abb6d4 100644 --- a/arch/arm/mach-s3c64xx/mach-mini6410.c +++ b/arch/arm/mach-s3c64xx/mach-mini6410.c @@ -32,8 +32,8 @@ #include <mach/regs-gpio.h> #include <mach/regs-modem.h> #include <mach/regs-srom.h> -#include <mach/s3c6410.h> +#include <plat/s3c6410.h> #include <plat/adc.h> #include <plat/cpu.h> #include <plat/devs.h> @@ -205,12 +205,6 @@ static struct platform_device mini6410_lcd_powerdev = { .dev.platform_data = &mini6410_lcd_power_data, }; -static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = { - .delay = 10000, - .presc = 49, - .oversampling_shift = 2, -}; - static struct platform_device *mini6410_devices[] __initdata = { &mini6410_device_eth, &s3c_device_hsmmc0, @@ -319,7 +313,7 @@ static void __init mini6410_machine_init(void) s3c_nand_set_platdata(&mini6410_nand_info); s3c_fb_set_platdata(&mini6410_lcd_pdata); - s3c24xx_ts_set_platdata(&s3c_ts_platform); + s3c24xx_ts_set_platdata(NULL); /* configure nCS1 width to 16 bits */ diff --git a/arch/arm/mach-s3c64xx/mach-ncp.c b/arch/arm/mach-s3c64xx/mach-ncp.c index 01c6857..0f4316a 100644 --- a/arch/arm/mach-s3c64xx/mach-ncp.c +++ b/arch/arm/mach-s3c64xx/mach-ncp.c @@ -39,7 +39,7 @@ #include <plat/iic.h> #include <plat/fb.h> -#include <mach/s3c6410.h> +#include <plat/s3c6410.h> #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> diff --git a/arch/arm/mach-s3c64xx/mach-real6410.c b/arch/arm/mach-s3c64xx/mach-real6410.c index 95b04b1..1073d81 100644 --- a/arch/arm/mach-s3c64xx/mach-real6410.c +++ b/arch/arm/mach-s3c64xx/mach-real6410.c @@ -33,8 +33,8 @@ #include <mach/regs-gpio.h> #include <mach/regs-modem.h> #include <mach/regs-srom.h> -#include <mach/s3c6410.h> +#include <plat/s3c6410.h> #include <plat/adc.h> #include <plat/cpu.h> #include <plat/devs.h> @@ -198,12 +198,6 @@ static struct platform_device *real6410_devices[] __initdata = { &s3c_device_ohci, }; -static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = { - .delay = 10000, - .presc = 49, - .oversampling_shift = 2, -}; - static void __init real6410_map_io(void) { u32 tmp; @@ -300,7 +294,7 @@ static void __init real6410_machine_init(void) s3c_fb_set_platdata(&real6410_lcd_pdata); s3c_nand_set_platdata(&real6410_nand_info); - s3c24xx_ts_set_platdata(&s3c_ts_platform); + s3c24xx_ts_set_platdata(NULL); /* configure nCS1 width to 16 bits */ diff --git a/arch/arm/mach-s3c64xx/mach-smartq5.c b/arch/arm/mach-s3c64xx/mach-smartq5.c index 342e8df..30e906b 100644 --- a/arch/arm/mach-s3c64xx/mach-smartq5.c +++ b/arch/arm/mach-s3c64xx/mach-smartq5.c @@ -22,8 +22,8 @@ #include <mach/map.h> #include <mach/regs-gpio.h> -#include <mach/s3c6410.h> +#include <plat/s3c6410.h> #include <plat/cpu.h> #include <plat/devs.h> #include <plat/fb.h> diff --git a/arch/arm/mach-s3c64xx/mach-smartq7.c b/arch/arm/mach-s3c64xx/mach-smartq7.c index 5796397..9a71c2b 100644 --- a/arch/arm/mach-s3c64xx/mach-smartq7.c +++ b/arch/arm/mach-s3c64xx/mach-smartq7.c @@ -22,8 +22,8 @@ #include <mach/map.h> #include <mach/regs-gpio.h> -#include <mach/s3c6410.h> +#include <plat/s3c6410.h> #include <plat/cpu.h> #include <plat/devs.h> #include <plat/fb.h> diff --git a/arch/arm/mach-s3c64xx/mach-smdk6400.c b/arch/arm/mach-s3c64xx/mach-smdk6400.c index 3cca642..fc7cb03 100644 --- a/arch/arm/mach-s3c64xx/mach-smdk6400.c +++ b/arch/arm/mach-s3c64xx/mach-smdk6400.c @@ -31,7 +31,7 @@ #include <plat/regs-serial.h> -#include <mach/s3c6400.h> +#include <plat/s3c6400.h> #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> diff --git a/arch/arm/mach-s3c64xx/mach-smdk6410.c b/arch/arm/mach-s3c64xx/mach-smdk6410.c index a9f3183..a817d62 100644 --- a/arch/arm/mach-s3c64xx/mach-smdk6410.c +++ b/arch/arm/mach-s3c64xx/mach-smdk6410.c @@ -63,7 +63,7 @@ #include <plat/fb.h> #include <plat/gpio-cfg.h> -#include <mach/s3c6410.h> +#include <plat/s3c6410.h> #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> @@ -619,12 +619,6 @@ static struct i2c_board_info i2c_devs1[] __initdata = { { I2C_BOARD_INFO("24c128", 0x57), }, /* Samsung S524AD0XD1 */ }; -static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = { - .delay = 10000, - .presc = 49, - .oversampling_shift = 2, -}; - /* LCD Backlight data */ static struct samsung_bl_gpio_info smdk6410_bl_gpio_info = { .no = S3C64XX_GPF(15), @@ -666,7 +660,7 @@ static void __init smdk6410_machine_init(void) samsung_keypad_set_platdata(&smdk6410_keypad_data); - s3c24xx_ts_set_platdata(&s3c_ts_platform); + s3c24xx_ts_set_platdata(NULL); /* configure nCS1 width to 16 bits */ diff --git a/arch/arm/mach-s3c64xx/pm.c b/arch/arm/mach-s3c64xx/pm.c index 055e285..b375cd5 100644 --- a/arch/arm/mach-s3c64xx/pm.c +++ b/arch/arm/mach-s3c64xx/pm.c @@ -29,6 +29,7 @@ #include <mach/regs-clock.h> #include <mach/regs-syscon-power.h> #include <mach/regs-gpio-memport.h> +#include <mach/regs-modem.h> #ifdef CONFIG_S3C_PM_DEBUG_LED_SMDK void s3c_pm_debug_smdkled(u32 set, u32 clear) @@ -85,6 +86,9 @@ static struct sleep_save misc_save[] = { SAVE_ITEM(S3C64XX_MEM0CONSLP0), SAVE_ITEM(S3C64XX_MEM0CONSLP1), SAVE_ITEM(S3C64XX_MEM1CONSLP), + + SAVE_ITEM(S3C64XX_SDMA_SEL), + SAVE_ITEM(S3C64XX_MODEM_MIFPCON), }; void s3c_pm_configure_extint(void) diff --git a/arch/arm/mach-s3c64xx/s3c6400.c b/arch/arm/mach-s3c64xx/s3c6400.c index 5e93fe3..7a3bc32 100644 --- a/arch/arm/mach-s3c64xx/s3c6400.c +++ b/arch/arm/mach-s3c64xx/s3c6400.c @@ -38,7 +38,7 @@ #include <plat/sdhci.h> #include <plat/iic-core.h> #include <plat/onenand-core.h> -#include <mach/s3c6400.h> +#include <plat/s3c6400.h> void __init s3c6400_map_io(void) { diff --git a/arch/arm/mach-s3c64xx/s3c6410.c b/arch/arm/mach-s3c64xx/s3c6410.c index 312aa6b..4117003 100644 --- a/arch/arm/mach-s3c64xx/s3c6410.c +++ b/arch/arm/mach-s3c64xx/s3c6410.c @@ -41,8 +41,8 @@ #include <plat/adc-core.h> #include <plat/iic-core.h> #include <plat/onenand-core.h> -#include <mach/s3c6400.h> -#include <mach/s3c6410.h> +#include <plat/s3c6400.h> +#include <plat/s3c6410.h> void __init s3c6410_map_io(void) { diff --git a/arch/arm/mach-s3c64xx/setup-sdhci.c b/arch/arm/mach-s3c64xx/setup-sdhci.c index f344a22..c75a71b 100644 --- a/arch/arm/mach-s3c64xx/setup-sdhci.c +++ b/arch/arm/mach-s3c64xx/setup-sdhci.c @@ -12,17 +12,7 @@ * published by the Free Software Foundation. */ -#include <linux/kernel.h> #include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/platform_device.h> -#include <linux/io.h> - -#include <linux/mmc/card.h> -#include <linux/mmc/host.h> - -#include <plat/regs-sdhci.h> -#include <plat/sdhci.h> /* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */ @@ -32,41 +22,3 @@ char *s3c64xx_hsmmc_clksrcs[4] = { [2] = "mmc_bus", /* [3] = "48m", - note not successfully used yet */ }; - -void s3c6400_setup_sdhci_cfg_card(struct platform_device *dev, - void __iomem *r, - struct mmc_ios *ios, - struct mmc_card *card) -{ - u32 ctrl2, ctrl3; - - ctrl2 = readl(r + S3C_SDHCI_CONTROL2); - ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK; - ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR | - S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK | - S3C_SDHCI_CTRL2_ENFBCLKRX | - S3C_SDHCI_CTRL2_DFCNT_NONE | - S3C_SDHCI_CTRL2_ENCLKOUTHOLD); - - if (ios->clock < 25 * 1000000) - ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 | - S3C_SDHCI_CTRL3_FCSEL2 | - S3C_SDHCI_CTRL3_FCSEL1 | - S3C_SDHCI_CTRL3_FCSEL0); - else - ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0); - - pr_debug("%s: CTRL 2=%08x, 3=%08x\n", __func__, ctrl2, ctrl3); - writel(ctrl2, r + S3C_SDHCI_CONTROL2); - writel(ctrl3, r + S3C_SDHCI_CONTROL3); -} - -void s3c6410_setup_sdhci_cfg_card(struct platform_device *dev, - void __iomem *r, - struct mmc_ios *ios, - struct mmc_card *card) -{ - writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA, r + S3C64XX_SDHCI_CONTROL4); - - s3c6400_setup_sdhci_cfg_card(dev, r, ios, card); -} diff --git a/arch/arm/mach-s5p64x0/Kconfig b/arch/arm/mach-s5p64x0/Kconfig index 65c7518..e361c41 100644 --- a/arch/arm/mach-s5p64x0/Kconfig +++ b/arch/arm/mach-s5p64x0/Kconfig @@ -9,18 +9,24 @@ if ARCH_S5P64X0 config CPU_S5P6440 bool - select S3C_PL330_DMA + select SAMSUNG_DMADEV select S5P_HRT help Enable S5P6440 CPU support config CPU_S5P6450 bool - select S3C_PL330_DMA + select SAMSUNG_DMADEV select S5P_HRT help Enable S5P6450 CPU support +config S5P64X0_SETUP_FB_24BPP + bool + help + Common setup code for S5P64X0 based boards with a LCD display + through RGB interface. + config S5P64X0_SETUP_I2C1 bool help @@ -31,6 +37,7 @@ config S5P64X0_SETUP_I2C1 config MACH_SMDK6440 bool "SMDK6440" select CPU_S5P6440 + select S3C_DEV_FB select S3C_DEV_I2C1 select S3C_DEV_RTC select S3C_DEV_WDT @@ -39,6 +46,7 @@ config MACH_SMDK6440 select SAMSUNG_DEV_BACKLIGHT select SAMSUNG_DEV_PWM select SAMSUNG_DEV_TS + select S5P64X0_SETUP_FB_24BPP select S5P64X0_SETUP_I2C1 help Machine support for the Samsung SMDK6440 @@ -46,6 +54,7 @@ config MACH_SMDK6440 config MACH_SMDK6450 bool "SMDK6450" select CPU_S5P6450 + select S3C_DEV_FB select S3C_DEV_I2C1 select S3C_DEV_RTC select S3C_DEV_WDT @@ -54,6 +63,7 @@ config MACH_SMDK6450 select SAMSUNG_DEV_BACKLIGHT select SAMSUNG_DEV_PWM select SAMSUNG_DEV_TS + select S5P64X0_SETUP_FB_24BPP select S5P64X0_SETUP_I2C1 help Machine support for the Samsung SMDK6450 diff --git a/arch/arm/mach-s5p64x0/Makefile b/arch/arm/mach-s5p64x0/Makefile index 5f6afdf..eb74680 100644 --- a/arch/arm/mach-s5p64x0/Makefile +++ b/arch/arm/mach-s5p64x0/Makefile @@ -12,7 +12,7 @@ obj- := # Core support for S5P64X0 system -obj-$(CONFIG_ARCH_S5P64X0) += cpu.o init.o clock.o dma.o gpiolib.o +obj-$(CONFIG_ARCH_S5P64X0) += cpu.o init.o clock.o dma.o obj-$(CONFIG_ARCH_S5P64X0) += setup-i2c0.o irq-eint.o obj-$(CONFIG_CPU_S5P6440) += clock-s5p6440.o obj-$(CONFIG_CPU_S5P6450) += clock-s5p6450.o @@ -28,3 +28,4 @@ obj-y += dev-audio.o obj-$(CONFIG_S3C64XX_DEV_SPI) += dev-spi.o obj-$(CONFIG_S5P64X0_SETUP_I2C1) += setup-i2c1.o +obj-$(CONFIG_S5P64X0_SETUP_FB_24BPP) += setup-fb-24bpp.o diff --git a/arch/arm/mach-s5p64x0/clock-s5p6440.c b/arch/arm/mach-s5p64x0/clock-s5p6440.c index 0e9cd30..c54c65d 100644 --- a/arch/arm/mach-s5p64x0/clock-s5p6440.c +++ b/arch/arm/mach-s5p64x0/clock-s5p6440.c @@ -146,7 +146,8 @@ static struct clk init_clocks_off[] = { .enable = s5p64x0_hclk0_ctrl, .ctrlbit = (1 << 8), }, { - .name = "pdma", + .name = "dma", + .devname = "dma-pl330", .parent = &clk_hclk_low.clk, .enable = s5p64x0_hclk0_ctrl, .ctrlbit = (1 << 12), @@ -499,6 +500,11 @@ static struct clksrc_clk *sysclks[] = { &clk_pclk_low, }; +static struct clk dummy_apb_pclk = { + .name = "apb_pclk", + .id = -1, +}; + void __init_or_cpufreq s5p6440_setup_clocks(void) { struct clk *xtal_clk; @@ -581,5 +587,7 @@ void __init s5p6440_register_clocks(void) s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); + s3c24xx_register_clock(&dummy_apb_pclk); + s3c_pwmclk_init(); } diff --git a/arch/arm/mach-s5p64x0/clock-s5p6450.c b/arch/arm/mach-s5p64x0/clock-s5p6450.c index d9dc16c..2d04abf 100644 --- a/arch/arm/mach-s5p64x0/clock-s5p6450.c +++ b/arch/arm/mach-s5p64x0/clock-s5p6450.c @@ -179,7 +179,8 @@ static struct clk init_clocks_off[] = { .enable = s5p64x0_hclk0_ctrl, .ctrlbit = (1 << 3), }, { - .name = "pdma", + .name = "dma", + .devname = "dma-pl330", .parent = &clk_hclk_low.clk, .enable = s5p64x0_hclk0_ctrl, .ctrlbit = (1 << 12), @@ -553,6 +554,11 @@ static struct clksrc_clk *sysclks[] = { &clk_sclk_audio0, }; +static struct clk dummy_apb_pclk = { + .name = "apb_pclk", + .id = -1, +}; + void __init_or_cpufreq s5p6450_setup_clocks(void) { struct clk *xtal_clk; @@ -632,5 +638,7 @@ void __init s5p6450_register_clocks(void) s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); + s3c24xx_register_clock(&dummy_apb_pclk); + s3c_pwmclk_init(); } diff --git a/arch/arm/mach-s5p64x0/cpu.c b/arch/arm/mach-s5p64x0/cpu.c index a5c0095..617da3b 100644 --- a/arch/arm/mach-s5p64x0/cpu.c +++ b/arch/arm/mach-s5p64x0/cpu.c @@ -38,6 +38,7 @@ #include <plat/s5p6440.h> #include <plat/s5p6450.h> #include <plat/adc-core.h> +#include <plat/fb-core.h> /* Initial IO mappings */ @@ -108,6 +109,7 @@ void __init s5p6440_map_io(void) { /* initialize any device information early */ s3c_adc_setname("s3c64xx-adc"); + s3c_fb_setname("s5p64x0-fb"); iotable_init(s5p64x0_iodesc, ARRAY_SIZE(s5p64x0_iodesc)); iotable_init(s5p6440_iodesc, ARRAY_SIZE(s5p6440_iodesc)); @@ -117,6 +119,7 @@ void __init s5p6450_map_io(void) { /* initialize any device information early */ s3c_adc_setname("s3c64xx-adc"); + s3c_fb_setname("s5p64x0-fb"); iotable_init(s5p64x0_iodesc, ARRAY_SIZE(s5p64x0_iodesc)); iotable_init(s5p6450_iodesc, ARRAY_SIZE(s5p6450_iodesc)); diff --git a/arch/arm/mach-s5p64x0/dma.c b/arch/arm/mach-s5p64x0/dma.c index 0e5b3e6..442dd4a 100644 --- a/arch/arm/mach-s5p64x0/dma.c +++ b/arch/arm/mach-s5p64x0/dma.c @@ -21,115 +21,208 @@ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ -#include <linux/platform_device.h> #include <linux/dma-mapping.h> +#include <linux/amba/bus.h> +#include <linux/amba/pl330.h> + +#include <asm/irq.h> #include <mach/map.h> #include <mach/irqs.h> #include <mach/regs-clock.h> +#include <mach/dma.h> #include <plat/cpu.h> #include <plat/devs.h> -#include <plat/s3c-pl330-pdata.h> +#include <plat/irqs.h> static u64 dma_dmamask = DMA_BIT_MASK(32); -static struct resource s5p64x0_pdma_resource[] = { - [0] = { - .start = S5P64X0_PA_PDMA, - .end = S5P64X0_PA_PDMA + SZ_4K, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_DMA0, - .end = IRQ_DMA0, - .flags = IORESOURCE_IRQ, +struct dma_pl330_peri s5p6440_pdma_peri[22] = { + { + .peri_id = (u8)DMACH_UART0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_UART1_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART1_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_UART2_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART2_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_UART3_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART3_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = DMACH_MAX, + }, { + .peri_id = DMACH_MAX, + }, { + .peri_id = (u8)DMACH_PCM0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_PCM0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_I2S0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_I2S0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_SPI0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_SPI0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_MAX, + }, { + .peri_id = (u8)DMACH_MAX, + }, { + .peri_id = (u8)DMACH_MAX, + }, { + .peri_id = (u8)DMACH_MAX, + }, { + .peri_id = (u8)DMACH_SPI1_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_SPI1_RX, + .rqtype = DEVTOMEM, }, }; -static struct s3c_pl330_platdata s5p6440_pdma_pdata = { - .peri = { - [0] = DMACH_UART0_RX, - [1] = DMACH_UART0_TX, - [2] = DMACH_UART1_RX, - [3] = DMACH_UART1_TX, - [4] = DMACH_UART2_RX, - [5] = DMACH_UART2_TX, - [6] = DMACH_UART3_RX, - [7] = DMACH_UART3_TX, - [8] = DMACH_MAX, - [9] = DMACH_MAX, - [10] = DMACH_PCM0_TX, - [11] = DMACH_PCM0_RX, - [12] = DMACH_I2S0_TX, - [13] = DMACH_I2S0_RX, - [14] = DMACH_SPI0_TX, - [15] = DMACH_SPI0_RX, - [16] = DMACH_MAX, - [17] = DMACH_MAX, - [18] = DMACH_MAX, - [19] = DMACH_MAX, - [20] = DMACH_SPI1_TX, - [21] = DMACH_SPI1_RX, - [22] = DMACH_MAX, - [23] = DMACH_MAX, - [24] = DMACH_MAX, - [25] = DMACH_MAX, - [26] = DMACH_MAX, - [27] = DMACH_MAX, - [28] = DMACH_MAX, - [29] = DMACH_PWM, - [30] = DMACH_MAX, - [31] = DMACH_MAX, - }, +struct dma_pl330_platdata s5p6440_pdma_pdata = { + .nr_valid_peri = ARRAY_SIZE(s5p6440_pdma_peri), + .peri = s5p6440_pdma_peri, }; -static struct s3c_pl330_platdata s5p6450_pdma_pdata = { - .peri = { - [0] = DMACH_UART0_RX, - [1] = DMACH_UART0_TX, - [2] = DMACH_UART1_RX, - [3] = DMACH_UART1_TX, - [4] = DMACH_UART2_RX, - [5] = DMACH_UART2_TX, - [6] = DMACH_UART3_RX, - [7] = DMACH_UART3_TX, - [8] = DMACH_UART4_RX, - [9] = DMACH_UART4_TX, - [10] = DMACH_PCM0_TX, - [11] = DMACH_PCM0_RX, - [12] = DMACH_I2S0_TX, - [13] = DMACH_I2S0_RX, - [14] = DMACH_SPI0_TX, - [15] = DMACH_SPI0_RX, - [16] = DMACH_PCM1_TX, - [17] = DMACH_PCM1_RX, - [18] = DMACH_PCM2_TX, - [19] = DMACH_PCM2_RX, - [20] = DMACH_SPI1_TX, - [21] = DMACH_SPI1_RX, - [22] = DMACH_USI_TX, - [23] = DMACH_USI_RX, - [24] = DMACH_MAX, - [25] = DMACH_I2S1_TX, - [26] = DMACH_I2S1_RX, - [27] = DMACH_I2S2_TX, - [28] = DMACH_I2S2_RX, - [29] = DMACH_PWM, - [30] = DMACH_UART5_RX, - [31] = DMACH_UART5_TX, +struct dma_pl330_peri s5p6450_pdma_peri[32] = { + { + .peri_id = (u8)DMACH_UART0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_UART1_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART1_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_UART2_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART2_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_UART3_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART3_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_UART4_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART4_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_PCM0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_PCM0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_I2S0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_I2S0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_SPI0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_SPI0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_PCM1_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_PCM1_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_PCM2_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_PCM2_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_SPI1_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_SPI1_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_USI_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_USI_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_MAX, + }, { + .peri_id = (u8)DMACH_I2S1_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_I2S1_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_I2S2_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_I2S2_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_PWM, + }, { + .peri_id = (u8)DMACH_UART5_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART5_TX, + .rqtype = MEMTODEV, }, }; -static struct platform_device s5p64x0_device_pdma = { - .name = "s3c-pl330", - .id = -1, - .num_resources = ARRAY_SIZE(s5p64x0_pdma_resource), - .resource = s5p64x0_pdma_resource, - .dev = { +struct dma_pl330_platdata s5p6450_pdma_pdata = { + .nr_valid_peri = ARRAY_SIZE(s5p6450_pdma_peri), + .peri = s5p6450_pdma_peri, +}; + +struct amba_device s5p64x0_device_pdma = { + .dev = { + .init_name = "dma-pl330", .dma_mask = &dma_dmamask, .coherent_dma_mask = DMA_BIT_MASK(32), }, + .res = { + .start = S5P64X0_PA_PDMA, + .end = S5P64X0_PA_PDMA + SZ_4K, + .flags = IORESOURCE_MEM, + }, + .irq = {IRQ_DMA0, NO_IRQ}, + .periphid = 0x00041330, }; static int __init s5p64x0_dma_init(void) @@ -139,7 +232,7 @@ static int __init s5p64x0_dma_init(void) else s5p64x0_device_pdma.dev.platform_data = &s5p6440_pdma_pdata; - platform_device_register(&s5p64x0_device_pdma); + amba_device_register(&s5p64x0_device_pdma, &iomem_resource); return 0; } diff --git a/arch/arm/mach-s5p64x0/include/mach/clkdev.h b/arch/arm/mach-s5p64x0/include/mach/clkdev.h deleted file mode 100644 index 7dffa83..0000000 --- a/arch/arm/mach-s5p64x0/include/mach/clkdev.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef __MACH_CLKDEV_H__ -#define __MACH_CLKDEV_H__ - -#define __clk_get(clk) ({ 1; }) -#define __clk_put(clk) do {} while (0) - -#endif diff --git a/arch/arm/mach-s5p64x0/include/mach/dma.h b/arch/arm/mach-s5p64x0/include/mach/dma.h index 81209eb..5a622af 100644 --- a/arch/arm/mach-s5p64x0/include/mach/dma.h +++ b/arch/arm/mach-s5p64x0/include/mach/dma.h @@ -20,7 +20,7 @@ #ifndef __MACH_DMA_H #define __MACH_DMA_H -/* This platform uses the common S3C DMA API driver for PL330 */ -#include <plat/s3c-dma-pl330.h> +/* This platform uses the common common DMA API driver for PL330 */ +#include <plat/dma-pl330.h> #endif /* __MACH_DMA_H */ diff --git a/arch/arm/mach-s5p64x0/include/mach/irqs.h b/arch/arm/mach-s5p64x0/include/mach/irqs.h index 5837a36..53982db 100644 --- a/arch/arm/mach-s5p64x0/include/mach/irqs.h +++ b/arch/arm/mach-s5p64x0/include/mach/irqs.h @@ -87,6 +87,10 @@ #define IRQ_I2S0 IRQ_I2SV40 +#define IRQ_LCD_FIFO IRQ_DISPCON0 +#define IRQ_LCD_VSYNC IRQ_DISPCON1 +#define IRQ_LCD_SYSTEM IRQ_DISPCON2 + /* S5P6450 EINT feature will be added */ /* diff --git a/arch/arm/mach-s5p64x0/include/mach/map.h b/arch/arm/mach-s5p64x0/include/mach/map.h index 95c9125..c5ef50c 100644 --- a/arch/arm/mach-s5p64x0/include/mach/map.h +++ b/arch/arm/mach-s5p64x0/include/mach/map.h @@ -47,6 +47,8 @@ #define S5P64X0_PA_HSMMC(x) (0xED800000 + ((x) * 0x100000)) +#define S5P64X0_PA_FB 0xEE000000 + #define S5P64X0_PA_I2S 0xF2000000 #define S5P6450_PA_I2S1 0xF2800000 #define S5P6450_PA_I2S2 0xF2900000 @@ -64,6 +66,7 @@ #define S3C_PA_IIC1 S5P6440_PA_IIC1 #define S3C_PA_RTC S5P64X0_PA_RTC #define S3C_PA_WDT S5P64X0_PA_WDT +#define S3C_PA_FB S5P64X0_PA_FB #define S5P_PA_CHIPID S5P64X0_PA_CHIPID #define S5P_PA_SROMC S5P64X0_PA_SROMC diff --git a/arch/arm/mach-s5p64x0/include/mach/pwm-clock.h b/arch/arm/mach-s5p64x0/include/mach/pwm-clock.h deleted file mode 100644 index 19fff8b..0000000 --- a/arch/arm/mach-s5p64x0/include/mach/pwm-clock.h +++ /dev/null @@ -1,68 +0,0 @@ -/* linux/arch/arm/mach-s5p64x0/include/mach/pwm-clock.h - * - * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * S5P64X0 - pwm clock and timer support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_PWMCLK_H -#define __ASM_ARCH_PWMCLK_H __FILE__ - -/** - * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk - * @tcfg: The timer TCFG1 register bits shifted down to 0. - * - * Return true if the given configuration from TCFG1 is a TCLK instead - * any of the TDIV clocks. - */ -static inline int pwm_cfg_src_is_tclk(unsigned long tcfg) -{ - return 0; -} - -/** - * tcfg_to_divisor() - convert tcfg1 setting to a divisor - * @tcfg1: The tcfg1 setting, shifted down. - * - * Get the divisor value for the given tcfg1 setting. We assume the - * caller has already checked to see if this is not a TCLK source. - */ -static inline unsigned long tcfg_to_divisor(unsigned long tcfg1) -{ - return 1 << tcfg1; -} - -/** - * pwm_tdiv_has_div1() - does the tdiv setting have a /1 - * - * Return true if we have a /1 in the tdiv setting. - */ -static inline unsigned int pwm_tdiv_has_div1(void) -{ - return 1; -} - -/** - * pwm_tdiv_div_bits() - calculate TCFG1 divisor value. - * @div: The divisor to calculate the bit information for. - * - * Turn a divisor into the necessary bit field for TCFG1. - */ -static inline unsigned long pwm_tdiv_div_bits(unsigned int div) -{ - return ilog2(div); -} - -#define S3C_TCFG1_MUX_TCLK 0 - -#endif /* __ASM_ARCH_PWMCLK_H */ diff --git a/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h b/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h index 6ce2547..88269ec 100644 --- a/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h +++ b/arch/arm/mach-s5p64x0/include/mach/regs-gpio.h @@ -34,6 +34,10 @@ #define S5P6450_GPQ_BASE (S5P_VA_GPIO + 0x0180) #define S5P6450_GPS_BASE (S5P_VA_GPIO + 0x0300) +#define S5P64X0_SPCON0 (S5P_VA_GPIO + 0x1A0) +#define S5P64X0_SPCON0_LCD_SEL_MASK (0x3 << 0) +#define S5P64X0_SPCON0_LCD_SEL_RGB (0x1 << 0) + /* External interrupt control registers for group0 */ #define EINT0CON0_OFFSET (0x900) diff --git a/arch/arm/mach-s5p64x0/mach-smdk6440.c b/arch/arm/mach-s5p64x0/mach-smdk6440.c index 346f8df..b0465d4 100644 --- a/arch/arm/mach-s5p64x0/mach-smdk6440.c +++ b/arch/arm/mach-s5p64x0/mach-smdk6440.c @@ -23,6 +23,9 @@ #include <linux/clk.h> #include <linux/gpio.h> #include <linux/pwm_backlight.h> +#include <linux/fb.h> + +#include <video/platform_lcd.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -47,6 +50,8 @@ #include <plat/ts.h> #include <plat/s5p-time.h> #include <plat/backlight.h> +#include <plat/fb.h> +#include <plat/regs-fb.h> #define SMDK6440_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ S3C2410_UCON_RXILEVEL | \ @@ -92,6 +97,59 @@ static struct s3c2410_uartcfg smdk6440_uartcfgs[] __initdata = { }, }; +/* Frame Buffer */ +static struct s3c_fb_pd_win smdk6440_fb_win0 = { + .win_mode = { + .left_margin = 8, + .right_margin = 13, + .upper_margin = 7, + .lower_margin = 5, + .hsync_len = 3, + .vsync_len = 1, + .xres = 800, + .yres = 480, + }, + .max_bpp = 32, + .default_bpp = 24, +}; + +static struct s3c_fb_platdata smdk6440_lcd_pdata __initdata = { + .win[0] = &smdk6440_fb_win0, + .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB, + .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, + .setup_gpio = s5p64x0_fb_gpio_setup_24bpp, +}; + +/* LCD power controller */ +static void smdk6440_lte480_reset_power(struct plat_lcd_data *pd, + unsigned int power) +{ + int err; + + if (power) { + err = gpio_request(S5P6440_GPN(5), "GPN"); + if (err) { + printk(KERN_ERR "failed to request GPN for lcd reset\n"); + return; + } + + gpio_direction_output(S5P6440_GPN(5), 1); + gpio_set_value(S5P6440_GPN(5), 0); + gpio_set_value(S5P6440_GPN(5), 1); + gpio_free(S5P6440_GPN(5)); + } +} + +static struct plat_lcd_data smdk6440_lcd_power_data = { + .set_power = smdk6440_lte480_reset_power, +}; + +static struct platform_device smdk6440_lcd_lte480wv = { + .name = "platform-lcd", + .dev.parent = &s3c_device_fb.dev, + .dev.platform_data = &smdk6440_lcd_power_data, +}; + static struct platform_device *smdk6440_devices[] __initdata = { &s3c_device_adc, &s3c_device_rtc, @@ -101,6 +159,8 @@ static struct platform_device *smdk6440_devices[] __initdata = { &s3c_device_wdt, &samsung_asoc_dma, &s5p6440_device_iis, + &s3c_device_fb, + &smdk6440_lcd_lte480wv, }; static struct s3c2410_platform_i2c s5p6440_i2c0_data __initdata = { @@ -129,12 +189,6 @@ static struct i2c_board_info smdk6440_i2c_devs1[] __initdata = { /* To be populated */ }; -static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = { - .delay = 10000, - .presc = 49, - .oversampling_shift = 2, -}; - /* LCD Backlight data */ static struct samsung_bl_gpio_info smdk6440_bl_gpio_info = { .no = S5P6440_GPF(15), @@ -153,9 +207,20 @@ static void __init smdk6440_map_io(void) s5p_set_timer_source(S5P_PWM3, S5P_PWM4); } +static void s5p6440_set_lcd_interface(void) +{ + unsigned int cfg; + + /* select TFT LCD type (RGB I/F) */ + cfg = __raw_readl(S5P64X0_SPCON0); + cfg &= ~S5P64X0_SPCON0_LCD_SEL_MASK; + cfg |= S5P64X0_SPCON0_LCD_SEL_RGB; + __raw_writel(cfg, S5P64X0_SPCON0); +} + static void __init smdk6440_machine_init(void) { - s3c24xx_ts_set_platdata(&s3c_ts_platform); + s3c24xx_ts_set_platdata(NULL); s3c_i2c0_set_platdata(&s5p6440_i2c0_data); s3c_i2c1_set_platdata(&s5p6440_i2c1_data); @@ -166,6 +231,9 @@ static void __init smdk6440_machine_init(void) samsung_bl_set(&smdk6440_bl_gpio_info, &smdk6440_bl_data); + s5p6440_set_lcd_interface(); + s3c_fb_set_platdata(&smdk6440_lcd_pdata); + platform_add_devices(smdk6440_devices, ARRAY_SIZE(smdk6440_devices)); } diff --git a/arch/arm/mach-s5p64x0/mach-smdk6450.c b/arch/arm/mach-s5p64x0/mach-smdk6450.c index 33f2adf..2a69caa 100644 --- a/arch/arm/mach-s5p64x0/mach-smdk6450.c +++ b/arch/arm/mach-s5p64x0/mach-smdk6450.c @@ -23,6 +23,9 @@ #include <linux/clk.h> #include <linux/gpio.h> #include <linux/pwm_backlight.h> +#include <linux/fb.h> + +#include <video/platform_lcd.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> @@ -47,6 +50,8 @@ #include <plat/ts.h> #include <plat/s5p-time.h> #include <plat/backlight.h> +#include <plat/fb.h> +#include <plat/regs-fb.h> #define SMDK6450_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ S3C2410_UCON_RXILEVEL | \ @@ -110,6 +115,59 @@ static struct s3c2410_uartcfg smdk6450_uartcfgs[] __initdata = { #endif }; +/* Frame Buffer */ +static struct s3c_fb_pd_win smdk6450_fb_win0 = { + .win_mode = { + .left_margin = 8, + .right_margin = 13, + .upper_margin = 7, + .lower_margin = 5, + .hsync_len = 3, + .vsync_len = 1, + .xres = 800, + .yres = 480, + }, + .max_bpp = 32, + .default_bpp = 24, +}; + +static struct s3c_fb_platdata smdk6450_lcd_pdata __initdata = { + .win[0] = &smdk6450_fb_win0, + .vidcon0 = VIDCON0_VIDOUT_RGB | VIDCON0_PNRMODE_RGB, + .vidcon1 = VIDCON1_INV_HSYNC | VIDCON1_INV_VSYNC, + .setup_gpio = s5p64x0_fb_gpio_setup_24bpp, +}; + +/* LCD power controller */ +static void smdk6450_lte480_reset_power(struct plat_lcd_data *pd, + unsigned int power) +{ + int err; + + if (power) { + err = gpio_request(S5P6450_GPN(5), "GPN"); + if (err) { + printk(KERN_ERR "failed to request GPN for lcd reset\n"); + return; + } + + gpio_direction_output(S5P6450_GPN(5), 1); + gpio_set_value(S5P6450_GPN(5), 0); + gpio_set_value(S5P6450_GPN(5), 1); + gpio_free(S5P6450_GPN(5)); + } +} + +static struct plat_lcd_data smdk6450_lcd_power_data = { + .set_power = smdk6450_lte480_reset_power, +}; + +static struct platform_device smdk6450_lcd_lte480wv = { + .name = "platform-lcd", + .dev.parent = &s3c_device_fb.dev, + .dev.platform_data = &smdk6450_lcd_power_data, +}; + static struct platform_device *smdk6450_devices[] __initdata = { &s3c_device_adc, &s3c_device_rtc, @@ -119,6 +177,9 @@ static struct platform_device *smdk6450_devices[] __initdata = { &s3c_device_wdt, &samsung_asoc_dma, &s5p6450_device_iis0, + &s3c_device_fb, + &smdk6450_lcd_lte480wv, + /* s5p6450_device_spi0 will be added */ }; @@ -148,12 +209,6 @@ static struct i2c_board_info smdk6450_i2c_devs1[] __initdata = { { I2C_BOARD_INFO("24c128", 0x57), },/* Samsung S524AD0XD1 EEPROM */ }; -static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = { - .delay = 10000, - .presc = 49, - .oversampling_shift = 2, -}; - /* LCD Backlight data */ static struct samsung_bl_gpio_info smdk6450_bl_gpio_info = { .no = S5P6450_GPF(15), @@ -172,9 +227,20 @@ static void __init smdk6450_map_io(void) s5p_set_timer_source(S5P_PWM3, S5P_PWM4); } +static void s5p6450_set_lcd_interface(void) +{ + unsigned int cfg; + + /* select TFT LCD type (RGB I/F) */ + cfg = __raw_readl(S5P64X0_SPCON0); + cfg &= ~S5P64X0_SPCON0_LCD_SEL_MASK; + cfg |= S5P64X0_SPCON0_LCD_SEL_RGB; + __raw_writel(cfg, S5P64X0_SPCON0); +} + static void __init smdk6450_machine_init(void) { - s3c24xx_ts_set_platdata(&s3c_ts_platform); + s3c24xx_ts_set_platdata(NULL); s3c_i2c0_set_platdata(&s5p6450_i2c0_data); s3c_i2c1_set_platdata(&s5p6450_i2c1_data); @@ -185,6 +251,9 @@ static void __init smdk6450_machine_init(void) samsung_bl_set(&smdk6450_bl_gpio_info, &smdk6450_bl_data); + s5p6450_set_lcd_interface(); + s3c_fb_set_platdata(&smdk6450_lcd_pdata); + platform_add_devices(smdk6450_devices, ARRAY_SIZE(smdk6450_devices)); } diff --git a/arch/arm/mach-s5p64x0/setup-fb-24bpp.c b/arch/arm/mach-s5p64x0/setup-fb-24bpp.c new file mode 100644 index 0000000..f346ee4 --- /dev/null +++ b/arch/arm/mach-s5p64x0/setup-fb-24bpp.c @@ -0,0 +1,29 @@ +/* linux/arch/arm/mach-s5p64x0/setup-fb-24bpp.c + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * Base S5P64X0 GPIO setup information for LCD framebuffer + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/fb.h> +#include <linux/gpio.h> + +#include <plat/cpu.h> +#include <plat/fb.h> +#include <plat/gpio-cfg.h> + +void s5p64x0_fb_gpio_setup_24bpp(void) +{ + if (soc_is_s5p6440()) { + s3c_gpio_cfgrange_nopull(S5P6440_GPI(0), 16, S3C_GPIO_SFN(2)); + s3c_gpio_cfgrange_nopull(S5P6440_GPJ(0), 12, S3C_GPIO_SFN(2)); + } else if (soc_is_s5p6450()) { + s3c_gpio_cfgrange_nopull(S5P6450_GPI(0), 16, S3C_GPIO_SFN(2)); + s3c_gpio_cfgrange_nopull(S5P6450_GPJ(0), 12, S3C_GPIO_SFN(2)); + } +} diff --git a/arch/arm/mach-s5pc100/Kconfig b/arch/arm/mach-s5pc100/Kconfig index e8a33c4..e538a4c 100644 --- a/arch/arm/mach-s5pc100/Kconfig +++ b/arch/arm/mach-s5pc100/Kconfig @@ -10,7 +10,7 @@ if ARCH_S5PC100 config CPU_S5PC100 bool select S5P_EXT_INT - select S3C_PL330_DMA + select SAMSUNG_DMADEV help Enable S5PC100 CPU support diff --git a/arch/arm/mach-s5pc100/clock.c b/arch/arm/mach-s5pc100/clock.c index ff5cbb3..8d47709 100644 --- a/arch/arm/mach-s5pc100/clock.c +++ b/arch/arm/mach-s5pc100/clock.c @@ -33,6 +33,11 @@ static struct clk s5p_clk_otgphy = { .name = "otg_phy", }; +static struct clk dummy_apb_pclk = { + .name = "apb_pclk", + .id = -1, +}; + static struct clk *clk_src_mout_href_list[] = { [0] = &s5p_clk_27m, [1] = &clk_fin_hpll, @@ -454,14 +459,14 @@ static struct clk init_clocks_off[] = { .enable = s5pc100_d1_0_ctrl, .ctrlbit = (1 << 2), }, { - .name = "pdma", - .devname = "s3c-pl330.1", + .name = "dma", + .devname = "dma-pl330.1", .parent = &clk_div_d1_bus.clk, .enable = s5pc100_d1_0_ctrl, .ctrlbit = (1 << 1), }, { - .name = "pdma", - .devname = "s3c-pl330.0", + .name = "dma", + .devname = "dma-pl330.0", .parent = &clk_div_d1_bus.clk, .enable = s5pc100_d1_0_ctrl, .ctrlbit = (1 << 0), @@ -1276,5 +1281,7 @@ void __init s5pc100_register_clocks(void) s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); + s3c24xx_register_clock(&dummy_apb_pclk); + s3c_pwmclk_init(); } diff --git a/arch/arm/mach-s5pc100/dma.c b/arch/arm/mach-s5pc100/dma.c index bf4cd0f..065a087 100644 --- a/arch/arm/mach-s5pc100/dma.c +++ b/arch/arm/mach-s5pc100/dma.c @@ -1,4 +1,8 @@ -/* +/* linux/arch/arm/mach-s5pc100/dma.c + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * * Copyright (C) 2010 Samsung Electronics Co. Ltd. * Jaswinder Singh <jassi.brar@samsung.com> * @@ -17,150 +21,246 @@ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ -#include <linux/platform_device.h> #include <linux/dma-mapping.h> +#include <linux/amba/bus.h> +#include <linux/amba/pl330.h> +#include <asm/irq.h> #include <plat/devs.h> +#include <plat/irqs.h> #include <mach/map.h> #include <mach/irqs.h> - -#include <plat/s3c-pl330-pdata.h> +#include <mach/dma.h> static u64 dma_dmamask = DMA_BIT_MASK(32); -static struct resource s5pc100_pdma0_resource[] = { - [0] = { - .start = S5PC100_PA_PDMA0, - .end = S5PC100_PA_PDMA0 + SZ_4K, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_PDMA0, - .end = IRQ_PDMA0, - .flags = IORESOURCE_IRQ, +struct dma_pl330_peri pdma0_peri[30] = { + { + .peri_id = (u8)DMACH_UART0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_UART1_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART1_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_UART2_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART2_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_UART3_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART3_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = DMACH_IRDA, + }, { + .peri_id = (u8)DMACH_I2S0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_I2S0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_I2S0S_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_I2S1_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_I2S1_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_I2S2_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_I2S2_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_SPI0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_SPI0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_SPI1_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_SPI1_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_SPI2_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_SPI2_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_AC97_MICIN, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_AC97_PCMIN, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_AC97_PCMOUT, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_EXTERNAL, + }, { + .peri_id = (u8)DMACH_PWM, + }, { + .peri_id = (u8)DMACH_SPDIF, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_HSI_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_HSI_TX, + .rqtype = MEMTODEV, }, }; -static struct s3c_pl330_platdata s5pc100_pdma0_pdata = { - .peri = { - [0] = DMACH_UART0_RX, - [1] = DMACH_UART0_TX, - [2] = DMACH_UART1_RX, - [3] = DMACH_UART1_TX, - [4] = DMACH_UART2_RX, - [5] = DMACH_UART2_TX, - [6] = DMACH_UART3_RX, - [7] = DMACH_UART3_TX, - [8] = DMACH_IRDA, - [9] = DMACH_I2S0_RX, - [10] = DMACH_I2S0_TX, - [11] = DMACH_I2S0S_TX, - [12] = DMACH_I2S1_RX, - [13] = DMACH_I2S1_TX, - [14] = DMACH_I2S2_RX, - [15] = DMACH_I2S2_TX, - [16] = DMACH_SPI0_RX, - [17] = DMACH_SPI0_TX, - [18] = DMACH_SPI1_RX, - [19] = DMACH_SPI1_TX, - [20] = DMACH_SPI2_RX, - [21] = DMACH_SPI2_TX, - [22] = DMACH_AC97_MICIN, - [23] = DMACH_AC97_PCMIN, - [24] = DMACH_AC97_PCMOUT, - [25] = DMACH_EXTERNAL, - [26] = DMACH_PWM, - [27] = DMACH_SPDIF, - [28] = DMACH_HSI_RX, - [29] = DMACH_HSI_TX, - [30] = DMACH_MAX, - [31] = DMACH_MAX, - }, +struct dma_pl330_platdata s5pc100_pdma0_pdata = { + .nr_valid_peri = ARRAY_SIZE(pdma0_peri), + .peri = pdma0_peri, }; -static struct platform_device s5pc100_device_pdma0 = { - .name = "s3c-pl330", - .id = 0, - .num_resources = ARRAY_SIZE(s5pc100_pdma0_resource), - .resource = s5pc100_pdma0_resource, - .dev = { +struct amba_device s5pc100_device_pdma0 = { + .dev = { + .init_name = "dma-pl330.0", .dma_mask = &dma_dmamask, .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = &s5pc100_pdma0_pdata, }, -}; - -static struct resource s5pc100_pdma1_resource[] = { - [0] = { - .start = S5PC100_PA_PDMA1, - .end = S5PC100_PA_PDMA1 + SZ_4K, + .res = { + .start = S5PC100_PA_PDMA0, + .end = S5PC100_PA_PDMA0 + SZ_4K, .flags = IORESOURCE_MEM, }, - [1] = { - .start = IRQ_PDMA1, - .end = IRQ_PDMA1, - .flags = IORESOURCE_IRQ, - }, + .irq = {IRQ_PDMA0, NO_IRQ}, + .periphid = 0x00041330, }; -static struct s3c_pl330_platdata s5pc100_pdma1_pdata = { - .peri = { - [0] = DMACH_UART0_RX, - [1] = DMACH_UART0_TX, - [2] = DMACH_UART1_RX, - [3] = DMACH_UART1_TX, - [4] = DMACH_UART2_RX, - [5] = DMACH_UART2_TX, - [6] = DMACH_UART3_RX, - [7] = DMACH_UART3_TX, - [8] = DMACH_IRDA, - [9] = DMACH_I2S0_RX, - [10] = DMACH_I2S0_TX, - [11] = DMACH_I2S0S_TX, - [12] = DMACH_I2S1_RX, - [13] = DMACH_I2S1_TX, - [14] = DMACH_I2S2_RX, - [15] = DMACH_I2S2_TX, - [16] = DMACH_SPI0_RX, - [17] = DMACH_SPI0_TX, - [18] = DMACH_SPI1_RX, - [19] = DMACH_SPI1_TX, - [20] = DMACH_SPI2_RX, - [21] = DMACH_SPI2_TX, - [22] = DMACH_PCM0_RX, - [23] = DMACH_PCM0_TX, - [24] = DMACH_PCM1_RX, - [25] = DMACH_PCM1_TX, - [26] = DMACH_MSM_REQ0, - [27] = DMACH_MSM_REQ1, - [28] = DMACH_MSM_REQ2, - [29] = DMACH_MSM_REQ3, - [30] = DMACH_MAX, - [31] = DMACH_MAX, +struct dma_pl330_peri pdma1_peri[30] = { + { + .peri_id = (u8)DMACH_UART0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_UART1_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART1_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_UART2_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART2_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_UART3_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART3_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = DMACH_IRDA, + }, { + .peri_id = (u8)DMACH_I2S0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_I2S0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_I2S0S_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_I2S1_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_I2S1_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_I2S2_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_I2S2_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_SPI0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_SPI0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_SPI1_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_SPI1_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_SPI2_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_SPI2_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_PCM0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_PCM1_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_PCM1_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_PCM1_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_MSM_REQ0, + }, { + .peri_id = (u8)DMACH_MSM_REQ1, + }, { + .peri_id = (u8)DMACH_MSM_REQ2, + }, { + .peri_id = (u8)DMACH_MSM_REQ3, }, }; -static struct platform_device s5pc100_device_pdma1 = { - .name = "s3c-pl330", - .id = 1, - .num_resources = ARRAY_SIZE(s5pc100_pdma1_resource), - .resource = s5pc100_pdma1_resource, - .dev = { +struct dma_pl330_platdata s5pc100_pdma1_pdata = { + .nr_valid_peri = ARRAY_SIZE(pdma1_peri), + .peri = pdma1_peri, +}; + +struct amba_device s5pc100_device_pdma1 = { + .dev = { + .init_name = "dma-pl330.1", .dma_mask = &dma_dmamask, .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = &s5pc100_pdma1_pdata, }, -}; - -static struct platform_device *s5pc100_dmacs[] __initdata = { - &s5pc100_device_pdma0, - &s5pc100_device_pdma1, + .res = { + .start = S5PC100_PA_PDMA1, + .end = S5PC100_PA_PDMA1 + SZ_4K, + .flags = IORESOURCE_MEM, + }, + .irq = {IRQ_PDMA1, NO_IRQ}, + .periphid = 0x00041330, }; static int __init s5pc100_dma_init(void) { - platform_add_devices(s5pc100_dmacs, ARRAY_SIZE(s5pc100_dmacs)); + amba_device_register(&s5pc100_device_pdma0, &iomem_resource); + amba_device_register(&s5pc100_device_pdma1, &iomem_resource); return 0; } diff --git a/arch/arm/mach-s5pc100/include/mach/clkdev.h b/arch/arm/mach-s5pc100/include/mach/clkdev.h deleted file mode 100644 index 7dffa83..0000000 --- a/arch/arm/mach-s5pc100/include/mach/clkdev.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef __MACH_CLKDEV_H__ -#define __MACH_CLKDEV_H__ - -#define __clk_get(clk) ({ 1; }) -#define __clk_put(clk) do {} while (0) - -#endif diff --git a/arch/arm/mach-s5pc100/include/mach/dma.h b/arch/arm/mach-s5pc100/include/mach/dma.h index 81209eb..201842a 100644 --- a/arch/arm/mach-s5pc100/include/mach/dma.h +++ b/arch/arm/mach-s5pc100/include/mach/dma.h @@ -20,7 +20,7 @@ #ifndef __MACH_DMA_H #define __MACH_DMA_H -/* This platform uses the common S3C DMA API driver for PL330 */ -#include <plat/s3c-dma-pl330.h> +/* This platform uses the common DMA API driver for PL330 */ +#include <plat/dma-pl330.h> #endif /* __MACH_DMA_H */ diff --git a/arch/arm/mach-s5pc100/include/mach/pwm-clock.h b/arch/arm/mach-s5pc100/include/mach/pwm-clock.h deleted file mode 100644 index b34d2f7..0000000 --- a/arch/arm/mach-s5pc100/include/mach/pwm-clock.h +++ /dev/null @@ -1,56 +0,0 @@ -/* linux/arch/arm/mach-s5pc100/include/mach/pwm-clock.h - * - * Copyright 2009 Samsung Electronics Co. - * Byungho Min <bhmin@samsung.com> - * - * S5PC100 - pwm clock and timer support - * - * Based on mach-s3c6400/include/mach/pwm-clock.h - */ - -/** - * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk - * @tcfg: The timer TCFG1 register bits shifted down to 0. - * - * Return true if the given configuration from TCFG1 is a TCLK instead - * any of the TDIV clocks. - */ -static inline int pwm_cfg_src_is_tclk(unsigned long tcfg) -{ - return tcfg >= S3C64XX_TCFG1_MUX_TCLK; -} - -/** - * tcfg_to_divisor() - convert tcfg1 setting to a divisor - * @tcfg1: The tcfg1 setting, shifted down. - * - * Get the divisor value for the given tcfg1 setting. We assume the - * caller has already checked to see if this is not a TCLK source. - */ -static inline unsigned long tcfg_to_divisor(unsigned long tcfg1) -{ - return 1 << tcfg1; -} - -/** - * pwm_tdiv_has_div1() - does the tdiv setting have a /1 - * - * Return true if we have a /1 in the tdiv setting. - */ -static inline unsigned int pwm_tdiv_has_div1(void) -{ - return 1; -} - -/** - * pwm_tdiv_div_bits() - calculate TCFG1 divisor value. - * @div: The divisor to calculate the bit information for. - * - * Turn a divisor into the necessary bit field for TCFG1. - */ -static inline unsigned long pwm_tdiv_div_bits(unsigned int div) -{ - return ilog2(div); -} - -#define S3C_TCFG1_MUX_TCLK S3C64XX_TCFG1_MUX_TCLK diff --git a/arch/arm/mach-s5pc100/mach-smdkc100.c b/arch/arm/mach-s5pc100/mach-smdkc100.c index 227d890..0b70762 100644 --- a/arch/arm/mach-s5pc100/mach-smdkc100.c +++ b/arch/arm/mach-s5pc100/mach-smdkc100.c @@ -203,12 +203,6 @@ static struct platform_device *smdkc100_devices[] __initdata = { &s5pc100_device_spdif, }; -static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = { - .delay = 10000, - .presc = 49, - .oversampling_shift = 2, -}; - /* LCD Backlight data */ static struct samsung_bl_gpio_info smdkc100_bl_gpio_info = { .no = S5PC100_GPD(0), @@ -228,7 +222,7 @@ static void __init smdkc100_map_io(void) static void __init smdkc100_machine_init(void) { - s3c24xx_ts_set_platdata(&s3c_ts_platform); + s3c24xx_ts_set_platdata(NULL); /* I2C */ s3c_i2c0_set_platdata(NULL); diff --git a/arch/arm/mach-s5pc100/setup-sdhci.c b/arch/arm/mach-s5pc100/setup-sdhci.c index be25879..6418c6e 100644 --- a/arch/arm/mach-s5pc100/setup-sdhci.c +++ b/arch/arm/mach-s5pc100/setup-sdhci.c @@ -11,17 +11,7 @@ * published by the Free Software Foundation. */ -#include <linux/kernel.h> #include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/platform_device.h> -#include <linux/io.h> - -#include <linux/mmc/card.h> -#include <linux/mmc/host.h> - -#include <plat/regs-sdhci.h> -#include <plat/sdhci.h> /* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */ @@ -31,35 +21,3 @@ char *s5pc100_hsmmc_clksrcs[4] = { [2] = "sclk_mmc", /* mmc_bus */ /* [3] = "48m", - note not successfully used yet */ }; - - -void s5pc100_setup_sdhci0_cfg_card(struct platform_device *dev, - void __iomem *r, - struct mmc_ios *ios, - struct mmc_card *card) -{ - u32 ctrl2, ctrl3; - - /* don't need to alter anything according to card-type */ - - writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA, r + S3C64XX_SDHCI_CONTROL4); - - ctrl2 = readl(r + S3C_SDHCI_CONTROL2); - ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK; - ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR | - S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK | - S3C_SDHCI_CTRL2_ENFBCLKRX | - S3C_SDHCI_CTRL2_DFCNT_NONE | - S3C_SDHCI_CTRL2_ENCLKOUTHOLD); - - if (ios->clock < 25 * 1000000) - ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 | - S3C_SDHCI_CTRL3_FCSEL2 | - S3C_SDHCI_CTRL3_FCSEL1 | - S3C_SDHCI_CTRL3_FCSEL0); - else - ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0); - - writel(ctrl2, r + S3C_SDHCI_CONTROL2); - writel(ctrl3, r + S3C_SDHCI_CONTROL3); -} diff --git a/arch/arm/mach-s5pv210/Kconfig b/arch/arm/mach-s5pv210/Kconfig index 69dd87c..f22c683 100644 --- a/arch/arm/mach-s5pv210/Kconfig +++ b/arch/arm/mach-s5pv210/Kconfig @@ -11,10 +11,9 @@ if ARCH_S5PV210 config CPU_S5PV210 bool - select S3C_PL330_DMA + select SAMSUNG_DMADEV select S5P_EXT_INT select S5P_HRT - select S5PV210_PM if PM help Enable S5PV210 CPU support @@ -94,11 +93,13 @@ config MACH_GONI select S3C_DEV_USB_HSOTG select S5P_DEV_ONENAND select SAMSUNG_DEV_KEYPAD + select S5P_DEV_TV select S5PV210_SETUP_FB_24BPP select S5PV210_SETUP_I2C1 select S5PV210_SETUP_I2C2 select S5PV210_SETUP_KEYPAD select S5PV210_SETUP_SDHCI + select S5PV210_SETUP_FIMC help Machine support for Samsung GONI board S5PC110(MCP) is one of package option of S5PV210 @@ -169,9 +170,4 @@ config MACH_TORBRECK endmenu -config S5PV210_PM - bool - help - Power Management code common to S5PV210 - endif diff --git a/arch/arm/mach-s5pv210/Makefile b/arch/arm/mach-s5pv210/Makefile index 599a3c0..ef7e466 100644 --- a/arch/arm/mach-s5pv210/Makefile +++ b/arch/arm/mach-s5pv210/Makefile @@ -14,7 +14,7 @@ obj- := obj-$(CONFIG_CPU_S5PV210) += cpu.o init.o clock.o dma.o obj-$(CONFIG_CPU_S5PV210) += setup-i2c0.o -obj-$(CONFIG_S5PV210_PM) += pm.o sleep.o +obj-$(CONFIG_PM) += pm.o sleep.o # machine support diff --git a/arch/arm/mach-s5pv210/clock.c b/arch/arm/mach-s5pv210/clock.c index 52a8e60..4c5ac7a 100644 --- a/arch/arm/mach-s5pv210/clock.c +++ b/arch/arm/mach-s5pv210/clock.c @@ -174,6 +174,16 @@ static int s5pv210_clk_mask1_ctrl(struct clk *clk, int enable) return s5p_gatectrl(S5P_CLK_SRC_MASK1, clk, enable); } +static int exynos4_clk_hdmiphy_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P_HDMI_PHY_CONTROL, clk, enable); +} + +static int exynos4_clk_dac_ctrl(struct clk *clk, int enable) +{ + return s5p_gatectrl(S5P_DAC_PHY_CONTROL, clk, enable); +} + static struct clk clk_sclk_hdmi27m = { .name = "sclk_hdmi27m", .rate = 27000000, @@ -203,6 +213,11 @@ static struct clk clk_pcmcdclk2 = { .name = "pcmcdclk", }; +static struct clk dummy_apb_pclk = { + .name = "apb_pclk", + .id = -1, +}; + static struct clk *clkset_vpllsrc_list[] = { [0] = &clk_fin_vpll, [1] = &clk_sclk_hdmi27m, @@ -289,14 +304,14 @@ static struct clk_ops clk_fout_apll_ops = { static struct clk init_clocks_off[] = { { - .name = "pdma", - .devname = "s3c-pl330.0", + .name = "dma", + .devname = "dma-pl330.0", .parent = &clk_hclk_psys.clk, .enable = s5pv210_clk_ip0_ctrl, .ctrlbit = (1 << 3), }, { - .name = "pdma", - .devname = "s3c-pl330.1", + .name = "dma", + .devname = "dma-pl330.1", .parent = &clk_hclk_psys.clk, .enable = s5pv210_clk_ip0_ctrl, .ctrlbit = (1 << 4), @@ -330,6 +345,40 @@ static struct clk init_clocks_off[] = { .enable = s5pv210_clk_ip0_ctrl, .ctrlbit = (1 << 16), }, { + .name = "dac", + .devname = "s5p-sdo", + .parent = &clk_hclk_dsys.clk, + .enable = s5pv210_clk_ip1_ctrl, + .ctrlbit = (1 << 10), + }, { + .name = "mixer", + .devname = "s5p-mixer", + .parent = &clk_hclk_dsys.clk, + .enable = s5pv210_clk_ip1_ctrl, + .ctrlbit = (1 << 9), + }, { + .name = "vp", + .devname = "s5p-mixer", + .parent = &clk_hclk_dsys.clk, + .enable = s5pv210_clk_ip1_ctrl, + .ctrlbit = (1 << 8), + }, { + .name = "hdmi", + .devname = "s5pv210-hdmi", + .parent = &clk_hclk_dsys.clk, + .enable = s5pv210_clk_ip1_ctrl, + .ctrlbit = (1 << 11), + }, { + .name = "hdmiphy", + .devname = "s5pv210-hdmi", + .enable = exynos4_clk_hdmiphy_ctrl, + .ctrlbit = (1 << 0), + }, { + .name = "dacphy", + .devname = "s5p-sdo", + .enable = exynos4_clk_dac_ctrl, + .ctrlbit = (1 << 0), + }, { .name = "otg", .parent = &clk_hclk_psys.clk, .enable = s5pv210_clk_ip1_ctrl, @@ -407,6 +456,12 @@ static struct clk init_clocks_off[] = { .enable = s5pv210_clk_ip3_ctrl, .ctrlbit = (1<<9), }, { + .name = "i2c", + .devname = "s3c2440-hdmiphy-i2c", + .parent = &clk_pclk_psys.clk, + .enable = s5pv210_clk_ip3_ctrl, + .ctrlbit = (1 << 11), + }, { .name = "spi", .devname = "s3c64xx-spi.0", .parent = &clk_pclk_psys.clk, @@ -594,6 +649,23 @@ static struct clksrc_sources clkset_sclk_mixer = { .nr_sources = ARRAY_SIZE(clkset_sclk_mixer_list), }; +static struct clksrc_clk clk_sclk_mixer = { + .clk = { + .name = "sclk_mixer", + .enable = s5pv210_clk_mask0_ctrl, + .ctrlbit = (1 << 1), + }, + .sources = &clkset_sclk_mixer, + .reg_src = { .reg = S5P_CLK_SRC1, .shift = 4, .size = 1 }, +}; + +static struct clksrc_clk *sclk_tv[] = { + &clk_sclk_dac, + &clk_sclk_pixel, + &clk_sclk_hdmi, + &clk_sclk_mixer, +}; + static struct clk *clkset_sclk_audio0_list[] = { [0] = &clk_ext_xtal_mux, [1] = &clk_pcmcdclk0, @@ -777,14 +849,6 @@ static struct clksrc_clk clksrcs[] = { .reg_div = { .reg = S5P_CLK_DIV4, .shift = 28, .size = 4 }, }, { .clk = { - .name = "sclk_mixer", - .enable = s5pv210_clk_mask0_ctrl, - .ctrlbit = (1 << 1), - }, - .sources = &clkset_sclk_mixer, - .reg_src = { .reg = S5P_CLK_SRC1, .shift = 4, .size = 1 }, - }, { - .clk = { .name = "sclk_fimc", .devname = "s5pv210-fimc.0", .enable = s5pv210_clk_mask1_ctrl, @@ -815,8 +879,7 @@ static struct clksrc_clk clksrcs[] = { .reg_div = { .reg = S5P_CLK_DIV3, .shift = 20, .size = 4 }, }, { .clk = { - .name = "sclk_cam", - .devname = "s5pv210-fimc.0", + .name = "sclk_cam0", .enable = s5pv210_clk_mask0_ctrl, .ctrlbit = (1 << 3), }, @@ -825,8 +888,7 @@ static struct clksrc_clk clksrcs[] = { .reg_div = { .reg = S5P_CLK_DIV1, .shift = 12, .size = 4 }, }, { .clk = { - .name = "sclk_cam", - .devname = "s5pv210-fimc.1", + .name = "sclk_cam1", .enable = s5pv210_clk_mask0_ctrl, .ctrlbit = (1 << 4), }, @@ -975,9 +1037,6 @@ static struct clksrc_clk *sysclks[] = { &clk_pclk_psys, &clk_vpllsrc, &clk_sclk_vpll, - &clk_sclk_dac, - &clk_sclk_pixel, - &clk_sclk_hdmi, &clk_mout_dmc0, &clk_sclk_dmc0, &clk_sclk_audio0, @@ -1062,6 +1121,61 @@ static struct clk_ops s5pv210_epll_ops = { .get_rate = s5p_epll_get_rate, }; +static u32 vpll_div[][5] = { + { 54000000, 3, 53, 3, 0 }, + { 108000000, 3, 53, 2, 0 }, +}; + +static unsigned long s5pv210_vpll_get_rate(struct clk *clk) +{ + return clk->rate; +} + +static int s5pv210_vpll_set_rate(struct clk *clk, unsigned long rate) +{ + unsigned int vpll_con; + unsigned int i; + + /* Return if nothing changed */ + if (clk->rate == rate) + return 0; + + vpll_con = __raw_readl(S5P_VPLL_CON); + vpll_con &= ~(0x1 << 27 | \ + PLL90XX_MDIV_MASK << PLL90XX_MDIV_SHIFT | \ + PLL90XX_PDIV_MASK << PLL90XX_PDIV_SHIFT | \ + PLL90XX_SDIV_MASK << PLL90XX_SDIV_SHIFT); + + for (i = 0; i < ARRAY_SIZE(vpll_div); i++) { + if (vpll_div[i][0] == rate) { + vpll_con |= vpll_div[i][1] << PLL90XX_PDIV_SHIFT; + vpll_con |= vpll_div[i][2] << PLL90XX_MDIV_SHIFT; + vpll_con |= vpll_div[i][3] << PLL90XX_SDIV_SHIFT; + vpll_con |= vpll_div[i][4] << 27; + break; + } + } + + if (i == ARRAY_SIZE(vpll_div)) { + printk(KERN_ERR "%s: Invalid Clock VPLL Frequency\n", + __func__); + return -EINVAL; + } + + __raw_writel(vpll_con, S5P_VPLL_CON); + + /* Wait for VPLL lock */ + while (!(__raw_readl(S5P_VPLL_CON) & (1 << PLL90XX_LOCKED_SHIFT))) + continue; + + clk->rate = rate; + return 0; +} +static struct clk_ops s5pv210_vpll_ops = { + .get_rate = s5pv210_vpll_get_rate, + .set_rate = s5pv210_vpll_set_rate, +}; + void __init_or_cpufreq s5pv210_setup_clocks(void) { struct clk *xtal_clk; @@ -1110,6 +1224,7 @@ void __init_or_cpufreq s5pv210_setup_clocks(void) clk_fout_apll.ops = &clk_fout_apll_ops; clk_fout_mpll.rate = mpll; clk_fout_epll.rate = epll; + clk_fout_vpll.ops = &s5pv210_vpll_ops; clk_fout_vpll.rate = vpll; printk(KERN_INFO "S5PV210: PLL settings, A=%ld, M=%ld, E=%ld V=%ld", @@ -1155,11 +1270,15 @@ void __init s5pv210_register_clocks(void) for (ptr = 0; ptr < ARRAY_SIZE(sysclks); ptr++) s3c_register_clksrc(sysclks[ptr], 1); + for (ptr = 0; ptr < ARRAY_SIZE(sclk_tv); ptr++) + s3c_register_clksrc(sclk_tv[ptr], 1); + s3c_register_clksrc(clksrcs, ARRAY_SIZE(clksrcs)); s3c_register_clocks(init_clocks, ARRAY_SIZE(init_clocks)); s3c_register_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); s3c_disable_clocks(init_clocks_off, ARRAY_SIZE(init_clocks_off)); + s3c24xx_register_clock(&dummy_apb_pclk); s3c_pwmclk_init(); } diff --git a/arch/arm/mach-s5pv210/cpu.c b/arch/arm/mach-s5pv210/cpu.c index 79907ec..6b8cdcc 100644 --- a/arch/arm/mach-s5pv210/cpu.c +++ b/arch/arm/mach-s5pv210/cpu.c @@ -41,6 +41,7 @@ #include <plat/keypad-core.h> #include <plat/sdhci.h> #include <plat/reset.h> +#include <plat/tv-core.h> /* Initial IO mappings */ @@ -143,6 +144,9 @@ void __init s5pv210_map_io(void) /* Use s5pv210-keypad instead of samsung-keypad */ samsung_keypad_setname("s5pv210-keypad"); + + /* setup TV devices */ + s5p_hdmi_setname("s5pv210-hdmi"); } void __init s5pv210_init_clocks(int xtal) diff --git a/arch/arm/mach-s5pv210/dma.c b/arch/arm/mach-s5pv210/dma.c index 497d343..86b749c 100644 --- a/arch/arm/mach-s5pv210/dma.c +++ b/arch/arm/mach-s5pv210/dma.c @@ -1,4 +1,8 @@ -/* +/* linux/arch/arm/mach-s5pv210/dma.c + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * * Copyright (C) 2010 Samsung Electronics Co. Ltd. * Jaswinder Singh <jassi.brar@samsung.com> * @@ -17,151 +21,240 @@ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ -#include <linux/platform_device.h> #include <linux/dma-mapping.h> +#include <linux/amba/bus.h> +#include <linux/amba/pl330.h> +#include <asm/irq.h> #include <plat/devs.h> #include <plat/irqs.h> #include <mach/map.h> #include <mach/irqs.h> - -#include <plat/s3c-pl330-pdata.h> +#include <mach/dma.h> static u64 dma_dmamask = DMA_BIT_MASK(32); -static struct resource s5pv210_pdma0_resource[] = { - [0] = { - .start = S5PV210_PA_PDMA0, - .end = S5PV210_PA_PDMA0 + SZ_4K, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_PDMA0, - .end = IRQ_PDMA0, - .flags = IORESOURCE_IRQ, +struct dma_pl330_peri pdma0_peri[28] = { + { + .peri_id = (u8)DMACH_UART0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_UART1_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART1_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_UART2_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART2_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_UART3_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART3_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = DMACH_MAX, + }, { + .peri_id = (u8)DMACH_I2S0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_I2S0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_I2S0S_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_I2S1_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_I2S1_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_MAX, + }, { + .peri_id = (u8)DMACH_MAX, + }, { + .peri_id = (u8)DMACH_SPI0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_SPI0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_SPI1_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_SPI1_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_MAX, + }, { + .peri_id = (u8)DMACH_MAX, + }, { + .peri_id = (u8)DMACH_AC97_MICIN, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_AC97_PCMIN, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_AC97_PCMOUT, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_MAX, + }, { + .peri_id = (u8)DMACH_PWM, + }, { + .peri_id = (u8)DMACH_SPDIF, + .rqtype = MEMTODEV, }, }; -static struct s3c_pl330_platdata s5pv210_pdma0_pdata = { - .peri = { - [0] = DMACH_UART0_RX, - [1] = DMACH_UART0_TX, - [2] = DMACH_UART1_RX, - [3] = DMACH_UART1_TX, - [4] = DMACH_UART2_RX, - [5] = DMACH_UART2_TX, - [6] = DMACH_UART3_RX, - [7] = DMACH_UART3_TX, - [8] = DMACH_MAX, - [9] = DMACH_I2S0_RX, - [10] = DMACH_I2S0_TX, - [11] = DMACH_I2S0S_TX, - [12] = DMACH_I2S1_RX, - [13] = DMACH_I2S1_TX, - [14] = DMACH_MAX, - [15] = DMACH_MAX, - [16] = DMACH_SPI0_RX, - [17] = DMACH_SPI0_TX, - [18] = DMACH_SPI1_RX, - [19] = DMACH_SPI1_TX, - [20] = DMACH_MAX, - [21] = DMACH_MAX, - [22] = DMACH_AC97_MICIN, - [23] = DMACH_AC97_PCMIN, - [24] = DMACH_AC97_PCMOUT, - [25] = DMACH_MAX, - [26] = DMACH_PWM, - [27] = DMACH_SPDIF, - [28] = DMACH_MAX, - [29] = DMACH_MAX, - [30] = DMACH_MAX, - [31] = DMACH_MAX, - }, +struct dma_pl330_platdata s5pv210_pdma0_pdata = { + .nr_valid_peri = ARRAY_SIZE(pdma0_peri), + .peri = pdma0_peri, }; -static struct platform_device s5pv210_device_pdma0 = { - .name = "s3c-pl330", - .id = 0, - .num_resources = ARRAY_SIZE(s5pv210_pdma0_resource), - .resource = s5pv210_pdma0_resource, - .dev = { +struct amba_device s5pv210_device_pdma0 = { + .dev = { + .init_name = "dma-pl330.0", .dma_mask = &dma_dmamask, .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = &s5pv210_pdma0_pdata, }, -}; - -static struct resource s5pv210_pdma1_resource[] = { - [0] = { - .start = S5PV210_PA_PDMA1, - .end = S5PV210_PA_PDMA1 + SZ_4K, + .res = { + .start = S5PV210_PA_PDMA0, + .end = S5PV210_PA_PDMA0 + SZ_4K, .flags = IORESOURCE_MEM, }, - [1] = { - .start = IRQ_PDMA1, - .end = IRQ_PDMA1, - .flags = IORESOURCE_IRQ, - }, + .irq = {IRQ_PDMA0, NO_IRQ}, + .periphid = 0x00041330, }; -static struct s3c_pl330_platdata s5pv210_pdma1_pdata = { - .peri = { - [0] = DMACH_UART0_RX, - [1] = DMACH_UART0_TX, - [2] = DMACH_UART1_RX, - [3] = DMACH_UART1_TX, - [4] = DMACH_UART2_RX, - [5] = DMACH_UART2_TX, - [6] = DMACH_UART3_RX, - [7] = DMACH_UART3_TX, - [8] = DMACH_MAX, - [9] = DMACH_I2S0_RX, - [10] = DMACH_I2S0_TX, - [11] = DMACH_I2S0S_TX, - [12] = DMACH_I2S1_RX, - [13] = DMACH_I2S1_TX, - [14] = DMACH_I2S2_RX, - [15] = DMACH_I2S2_TX, - [16] = DMACH_SPI0_RX, - [17] = DMACH_SPI0_TX, - [18] = DMACH_SPI1_RX, - [19] = DMACH_SPI1_TX, - [20] = DMACH_MAX, - [21] = DMACH_MAX, - [22] = DMACH_PCM0_RX, - [23] = DMACH_PCM0_TX, - [24] = DMACH_PCM1_RX, - [25] = DMACH_PCM1_TX, - [26] = DMACH_MSM_REQ0, - [27] = DMACH_MSM_REQ1, - [28] = DMACH_MSM_REQ2, - [29] = DMACH_MSM_REQ3, - [30] = DMACH_PCM2_RX, - [31] = DMACH_PCM2_TX, +struct dma_pl330_peri pdma1_peri[32] = { + { + .peri_id = (u8)DMACH_UART0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_UART1_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART1_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_UART2_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART2_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_UART3_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_UART3_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = DMACH_MAX, + }, { + .peri_id = (u8)DMACH_I2S0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_I2S0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_I2S0S_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_I2S1_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_I2S1_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_I2S2_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_I2S2_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_SPI0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_SPI0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_SPI1_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_SPI1_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_MAX, + }, { + .peri_id = (u8)DMACH_MAX, + }, { + .peri_id = (u8)DMACH_PCM0_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_PCM0_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_PCM1_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_PCM1_TX, + .rqtype = MEMTODEV, + }, { + .peri_id = (u8)DMACH_MSM_REQ0, + }, { + .peri_id = (u8)DMACH_MSM_REQ1, + }, { + .peri_id = (u8)DMACH_MSM_REQ2, + }, { + .peri_id = (u8)DMACH_MSM_REQ3, + }, { + .peri_id = (u8)DMACH_PCM2_RX, + .rqtype = DEVTOMEM, + }, { + .peri_id = (u8)DMACH_PCM2_TX, + .rqtype = MEMTODEV, }, }; -static struct platform_device s5pv210_device_pdma1 = { - .name = "s3c-pl330", - .id = 1, - .num_resources = ARRAY_SIZE(s5pv210_pdma1_resource), - .resource = s5pv210_pdma1_resource, - .dev = { +struct dma_pl330_platdata s5pv210_pdma1_pdata = { + .nr_valid_peri = ARRAY_SIZE(pdma1_peri), + .peri = pdma1_peri, +}; + +struct amba_device s5pv210_device_pdma1 = { + .dev = { + .init_name = "dma-pl330.1", .dma_mask = &dma_dmamask, .coherent_dma_mask = DMA_BIT_MASK(32), .platform_data = &s5pv210_pdma1_pdata, }, -}; - -static struct platform_device *s5pv210_dmacs[] __initdata = { - &s5pv210_device_pdma0, - &s5pv210_device_pdma1, + .res = { + .start = S5PV210_PA_PDMA1, + .end = S5PV210_PA_PDMA1 + SZ_4K, + .flags = IORESOURCE_MEM, + }, + .irq = {IRQ_PDMA1, NO_IRQ}, + .periphid = 0x00041330, }; static int __init s5pv210_dma_init(void) { - platform_add_devices(s5pv210_dmacs, ARRAY_SIZE(s5pv210_dmacs)); + amba_device_register(&s5pv210_device_pdma0, &iomem_resource); + amba_device_register(&s5pv210_device_pdma1, &iomem_resource); return 0; } diff --git a/arch/arm/mach-s5pv210/include/mach/clkdev.h b/arch/arm/mach-s5pv210/include/mach/clkdev.h deleted file mode 100644 index 7dffa83..0000000 --- a/arch/arm/mach-s5pv210/include/mach/clkdev.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef __MACH_CLKDEV_H__ -#define __MACH_CLKDEV_H__ - -#define __clk_get(clk) ({ 1; }) -#define __clk_put(clk) do {} while (0) - -#endif diff --git a/arch/arm/mach-s5pv210/include/mach/dma.h b/arch/arm/mach-s5pv210/include/mach/dma.h index 81209eb..201842a 100644 --- a/arch/arm/mach-s5pv210/include/mach/dma.h +++ b/arch/arm/mach-s5pv210/include/mach/dma.h @@ -20,7 +20,7 @@ #ifndef __MACH_DMA_H #define __MACH_DMA_H -/* This platform uses the common S3C DMA API driver for PL330 */ -#include <plat/s3c-dma-pl330.h> +/* This platform uses the common DMA API driver for PL330 */ +#include <plat/dma-pl330.h> #endif /* __MACH_DMA_H */ diff --git a/arch/arm/mach-s5pv210/include/mach/i2c-hdmiphy.h b/arch/arm/mach-s5pv210/include/mach/i2c-hdmiphy.h new file mode 100644 index 0000000..6afa624 --- /dev/null +++ b/arch/arm/mach-s5pv210/include/mach/i2c-hdmiphy.h @@ -0,0 +1,16 @@ +/* + * Copyright (C) 2011 Samsung Electronics Co., Ltd. + * + * S5P series i2c hdmiphy helper definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef PLAT_S5P_I2C_HDMIPHY_H_ +#define PLAT_S5P_I2C_HDMIPHY_H_ + +#define S5P_I2C_HDMIPHY_BUS_NUM (3) + +#endif diff --git a/arch/arm/mach-s5pv210/include/mach/irqs.h b/arch/arm/mach-s5pv210/include/mach/irqs.h index b9f9ec3..5e0de3a 100644 --- a/arch/arm/mach-s5pv210/include/mach/irqs.h +++ b/arch/arm/mach-s5pv210/include/mach/irqs.h @@ -56,7 +56,7 @@ #define IRQ_SPI2 S5P_IRQ_VIC1(17) #define IRQ_IRDA S5P_IRQ_VIC1(18) #define IRQ_IIC2 S5P_IRQ_VIC1(19) -#define IRQ_IIC3 S5P_IRQ_VIC1(20) +#define IRQ_IIC_HDMIPHY S5P_IRQ_VIC1(20) #define IRQ_HSIRX S5P_IRQ_VIC1(21) #define IRQ_HSITX S5P_IRQ_VIC1(22) #define IRQ_UHOST S5P_IRQ_VIC1(23) @@ -86,7 +86,7 @@ #define IRQ_HDMI S5P_IRQ_VIC2(12) #define IRQ_IIC1 S5P_IRQ_VIC2(13) #define IRQ_MFC S5P_IRQ_VIC2(14) -#define IRQ_TVENC S5P_IRQ_VIC2(15) +#define IRQ_SDO S5P_IRQ_VIC2(15) #define IRQ_I2S0 S5P_IRQ_VIC2(16) #define IRQ_I2S1 S5P_IRQ_VIC2(17) #define IRQ_I2S2 S5P_IRQ_VIC2(18) diff --git a/arch/arm/mach-s5pv210/include/mach/map.h b/arch/arm/mach-s5pv210/include/mach/map.h index aac343c..7ff609f 100644 --- a/arch/arm/mach-s5pv210/include/mach/map.h +++ b/arch/arm/mach-s5pv210/include/mach/map.h @@ -90,6 +90,12 @@ #define S5PV210_PA_FIMC1 0xFB300000 #define S5PV210_PA_FIMC2 0xFB400000 +#define S5PV210_PA_SDO 0xF9000000 +#define S5PV210_PA_VP 0xF9100000 +#define S5PV210_PA_MIXER 0xF9200000 +#define S5PV210_PA_HDMI 0xFA100000 +#define S5PV210_PA_IIC_HDMIPHY 0xFA900000 + /* Compatibiltiy Defines */ #define S3C_PA_FB S5PV210_PA_FB @@ -110,6 +116,13 @@ #define S5P_PA_FIMC2 S5PV210_PA_FIMC2 #define S5P_PA_MIPI_CSIS0 S5PV210_PA_MIPI_CSIS #define S5P_PA_MFC S5PV210_PA_MFC +#define S5P_PA_IIC_HDMIPHY S5PV210_PA_IIC_HDMIPHY + +#define S5P_PA_SDO S5PV210_PA_SDO +#define S5P_PA_VP S5PV210_PA_VP +#define S5P_PA_MIXER S5PV210_PA_MIXER +#define S5P_PA_HDMI S5PV210_PA_HDMI + #define S5P_PA_ONENAND S5PC110_PA_ONENAND #define S5P_PA_ONENAND_DMA S5PC110_PA_ONENAND_DMA #define S5P_PA_SDRAM S5PV210_PA_SDRAM diff --git a/arch/arm/mach-s5pv210/include/mach/pm-core.h b/arch/arm/mach-s5pv210/include/mach/pm-core.h index 3e22109..eba8aea 100644 --- a/arch/arm/mach-s5pv210/include/mach/pm-core.h +++ b/arch/arm/mach-s5pv210/include/mach/pm-core.h @@ -43,4 +43,4 @@ static inline void s3c_pm_arch_update_uart(void __iomem *regs, } static inline void s3c_pm_restored_gpios(void) { } -static inline void s3c_pm_saved_gpios(void) { } +static inline void samsung_pm_saved_gpios(void) { } diff --git a/arch/arm/mach-s5pv210/include/mach/pwm-clock.h b/arch/arm/mach-s5pv210/include/mach/pwm-clock.h deleted file mode 100644 index f8a9f1b..0000000 --- a/arch/arm/mach-s5pv210/include/mach/pwm-clock.h +++ /dev/null @@ -1,70 +0,0 @@ -/* linux/arch/arm/mach-s5pv210/include/mach/pwm-clock.h - * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * Based on arch/arm/mach-s3c64xx/include/mach/pwm-clock.h - * - * S5PV210 - pwm clock and timer support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_ARCH_PWMCLK_H -#define __ASM_ARCH_PWMCLK_H __FILE__ - -/** - * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk - * @tcfg: The timer TCFG1 register bits shifted down to 0. - * - * Return true if the given configuration from TCFG1 is a TCLK instead - * any of the TDIV clocks. - */ -static inline int pwm_cfg_src_is_tclk(unsigned long tcfg) -{ - return tcfg == S3C64XX_TCFG1_MUX_TCLK; -} - -/** - * tcfg_to_divisor() - convert tcfg1 setting to a divisor - * @tcfg1: The tcfg1 setting, shifted down. - * - * Get the divisor value for the given tcfg1 setting. We assume the - * caller has already checked to see if this is not a TCLK source. - */ -static inline unsigned long tcfg_to_divisor(unsigned long tcfg1) -{ - return 1 << tcfg1; -} - -/** - * pwm_tdiv_has_div1() - does the tdiv setting have a /1 - * - * Return true if we have a /1 in the tdiv setting. - */ -static inline unsigned int pwm_tdiv_has_div1(void) -{ - return 1; -} - -/** - * pwm_tdiv_div_bits() - calculate TCFG1 divisor value. - * @div: The divisor to calculate the bit information for. - * - * Turn a divisor into the necessary bit field for TCFG1. - */ -static inline unsigned long pwm_tdiv_div_bits(unsigned int div) -{ - return ilog2(div); -} - -#define S3C_TCFG1_MUX_TCLK S3C64XX_TCFG1_MUX_TCLK - -#endif /* __ASM_ARCH_PWMCLK_H */ diff --git a/arch/arm/mach-s5pv210/include/mach/regs-clock.h b/arch/arm/mach-s5pv210/include/mach/regs-clock.h index 78925c5..032de66 100644 --- a/arch/arm/mach-s5pv210/include/mach/regs-clock.h +++ b/arch/arm/mach-s5pv210/include/mach/regs-clock.h @@ -144,8 +144,9 @@ #define S5P_OTHERS S5P_CLKREG(0xE000) #define S5P_OM_STAT S5P_CLKREG(0xE100) +#define S5P_HDMI_PHY_CONTROL S5P_CLKREG(0xE804) #define S5P_USB_PHY_CONTROL S5P_CLKREG(0xE80C) -#define S5P_DAC_CONTROL S5P_CLKREG(0xE810) +#define S5P_DAC_PHY_CONTROL S5P_CLKREG(0xE810) #define S5P_MIPI_DPHY_CONTROL(x) S5P_CLKREG(0xE814) #define S5P_MIPI_DPHY_ENABLE (1 << 0) #define S5P_MIPI_DPHY_SRESETN (1 << 1) diff --git a/arch/arm/mach-s5pv210/mach-goni.c b/arch/arm/mach-s5pv210/mach-goni.c index 85c2d51..01e4867 100644 --- a/arch/arm/mach-s5pv210/mach-goni.c +++ b/arch/arm/mach-s5pv210/mach-goni.c @@ -48,6 +48,11 @@ #include <plat/s5p-time.h> #include <plat/mfc.h> #include <plat/regs-fb-v4.h> +#include <plat/camport.h> + +#include <media/v4l2-mediabus.h> +#include <media/s5p_fimc.h> +#include <media/noon010pc30.h> /* Following are default values for UCON, ULCON and UFCON UART registers */ #define GONI_UCON_DEFAULT (S3C2410_UCON_TXILEVEL | \ @@ -272,6 +277,14 @@ static void __init goni_tsp_init(void) i2c2_devs[0].irq = gpio_to_irq(gpio); } +static void goni_camera_init(void) +{ + s5pv210_fimc_setup_gpio(S5P_CAMPORT_A); + + /* Set max driver strength on CAM_A_CLKOUT pin. */ + s5p_gpio_set_drvstr(S5PV210_GPE1(3), S5P_GPIO_DRVSTR_LV4); +} + /* MAX8998 regulators */ #if defined(CONFIG_REGULATOR_MAX8998) || defined(CONFIG_REGULATOR_MAX8998_MODULE) @@ -285,6 +298,7 @@ static struct regulator_consumer_supply goni_ldo5_consumers[] = { static struct regulator_consumer_supply goni_ldo8_consumers[] = { REGULATOR_SUPPLY("vusb_d", "s3c-hsotg"), + REGULATOR_SUPPLY("vdd33a_dac", "s5p-sdo"), }; static struct regulator_consumer_supply goni_ldo11_consumers[] = { @@ -475,6 +489,10 @@ static struct regulator_consumer_supply buck1_consumer = static struct regulator_consumer_supply buck2_consumer = REGULATOR_SUPPLY("vddint", NULL); +static struct regulator_consumer_supply buck3_consumer = + REGULATOR_SUPPLY("vdet", "s5p-sdo"); + + static struct regulator_init_data goni_buck1_data = { .constraints = { .name = "VARM_1.2V", @@ -511,6 +529,8 @@ static struct regulator_init_data goni_buck3_data = { .enabled = 1, }, }, + .num_consumer_supplies = 1, + .consumer_supplies = &buck3_consumer, }; static struct regulator_init_data goni_buck4_data = { @@ -801,6 +821,39 @@ static void goni_setup_sdhci(void) s3c_sdhci2_set_platdata(&goni_hsmmc2_data); }; +static struct noon010pc30_platform_data noon010pc30_pldata = { + .clk_rate = 16000000UL, + .gpio_nreset = S5PV210_GPB(2), /* CAM_CIF_NRST */ + .gpio_nstby = S5PV210_GPB(0), /* CAM_CIF_NSTBY */ +}; + +static struct i2c_board_info noon010pc30_board_info = { + I2C_BOARD_INFO("NOON010PC30", 0x60 >> 1), + .platform_data = &noon010pc30_pldata, +}; + +static struct s5p_fimc_isp_info goni_camera_sensors[] = { + { + .mux_id = 0, + .flags = V4L2_MBUS_PCLK_SAMPLE_FALLING | + V4L2_MBUS_VSYNC_ACTIVE_LOW, + .bus_type = FIMC_ITU_601, + .board_info = &noon010pc30_board_info, + .i2c_bus_num = 0, + .clk_frequency = 16000000UL, + }, +}; + +struct s5p_platform_fimc goni_fimc_md_platdata __initdata = { + .isp_info = goni_camera_sensors, + .num_clients = ARRAY_SIZE(goni_camera_sensors), +}; + +struct platform_device s5p_device_fimc_md = { + .name = "s5p-fimc-md", + .id = -1, +}; + static struct platform_device *goni_devices[] __initdata = { &s3c_device_fb, &s5p_device_onenand, @@ -812,10 +865,13 @@ static struct platform_device *goni_devices[] __initdata = { &s5p_device_mfc, &s5p_device_mfc_l, &s5p_device_mfc_r, + &s5p_device_mixer, + &s5p_device_sdo, &s3c_device_i2c0, &s5p_device_fimc0, &s5p_device_fimc1, &s5p_device_fimc2, + &s5p_device_fimc_md, &s3c_device_hsmmc0, &s3c_device_hsmmc1, &s3c_device_hsmmc2, @@ -884,6 +940,12 @@ static void __init goni_machine_init(void) /* FB */ s3c_fb_set_platdata(&goni_lcd_pdata); + /* FIMC */ + s3c_set_platdata(&goni_fimc_md_platdata, sizeof(goni_fimc_md_platdata), + &s5p_device_fimc_md); + + goni_camera_init(); + /* SPI */ spi_register_board_info(spi_board_info, ARRAY_SIZE(spi_board_info)); diff --git a/arch/arm/mach-s5pv210/mach-smdkv210.c b/arch/arm/mach-s5pv210/mach-smdkv210.c index 5e011fc..4b27bca 100644 --- a/arch/arm/mach-s5pv210/mach-smdkv210.c +++ b/arch/arm/mach-s5pv210/mach-smdkv210.c @@ -265,12 +265,6 @@ static struct i2c_board_info smdkv210_i2c_devs2[] __initdata = { /* To Be Updated */ }; -static struct s3c2410_ts_mach_info s3c_ts_platform __initdata = { - .delay = 10000, - .presc = 49, - .oversampling_shift = 2, -}; - /* LCD Backlight data */ static struct samsung_bl_gpio_info smdkv210_bl_gpio_info = { .no = S5PV210_GPD0(3), @@ -296,7 +290,7 @@ static void __init smdkv210_machine_init(void) smdkv210_dm9000_init(); samsung_keypad_set_platdata(&smdkv210_keypad_data); - s3c24xx_ts_set_platdata(&s3c_ts_platform); + s3c24xx_ts_set_platdata(NULL); s3c_i2c0_set_platdata(NULL); s3c_i2c1_set_platdata(NULL); diff --git a/arch/arm/mach-s5pv210/setup-sdhci.c b/arch/arm/mach-s5pv210/setup-sdhci.c index a83b6c9..6b8ccc4 100644 --- a/arch/arm/mach-s5pv210/setup-sdhci.c +++ b/arch/arm/mach-s5pv210/setup-sdhci.c @@ -10,17 +10,7 @@ * published by the Free Software Foundation. */ -#include <linux/kernel.h> #include <linux/types.h> -#include <linux/interrupt.h> -#include <linux/platform_device.h> -#include <linux/io.h> - -#include <linux/mmc/card.h> -#include <linux/mmc/host.h> - -#include <plat/regs-sdhci.h> -#include <plat/sdhci.h> /* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */ @@ -30,34 +20,3 @@ char *s5pv210_hsmmc_clksrcs[4] = { [2] = "sclk_mmc", /* mmc_bus */ /* [3] = NULL, - reserved */ }; - -void s5pv210_setup_sdhci_cfg_card(struct platform_device *dev, - void __iomem *r, - struct mmc_ios *ios, - struct mmc_card *card) -{ - u32 ctrl2, ctrl3; - - /* don't need to alter anything according to card-type */ - - writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA, r + S3C64XX_SDHCI_CONTROL4); - - ctrl2 = readl(r + S3C_SDHCI_CONTROL2); - ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK; - ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR | - S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK | - S3C_SDHCI_CTRL2_ENFBCLKRX | - S3C_SDHCI_CTRL2_DFCNT_NONE | - S3C_SDHCI_CTRL2_ENCLKOUTHOLD); - - if (ios->clock < 25 * 1000000) - ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 | - S3C_SDHCI_CTRL3_FCSEL2 | - S3C_SDHCI_CTRL3_FCSEL1 | - S3C_SDHCI_CTRL3_FCSEL0); - else - ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0); - - writel(ctrl2, r + S3C_SDHCI_CONTROL2); - writel(ctrl3, r + S3C_SDHCI_CONTROL3); -} diff --git a/arch/arm/mm/cache-v7.S b/arch/arm/mm/cache-v7.S index 3b24bfa..07c4bc8 100644 --- a/arch/arm/mm/cache-v7.S +++ b/arch/arm/mm/cache-v7.S @@ -174,6 +174,10 @@ ENTRY(v7_coherent_user_range) dcache_line_size r2, r3 sub r3, r2, #1 bic r12, r0, r3 +#ifdef CONFIG_ARM_ERRATA_764369 + ALT_SMP(W(dsb)) + ALT_UP(W(nop)) +#endif 1: USER( mcr p15, 0, r12, c7, c11, 1 ) @ clean D line to the point of unification add r12, r12, r2 @@ -223,6 +227,10 @@ ENTRY(v7_flush_kern_dcache_area) add r1, r0, r1 sub r3, r2, #1 bic r0, r0, r3 +#ifdef CONFIG_ARM_ERRATA_764369 + ALT_SMP(W(dsb)) + ALT_UP(W(nop)) +#endif 1: mcr p15, 0, r0, c7, c14, 1 @ clean & invalidate D line / unified line add r0, r0, r2 @@ -247,6 +255,10 @@ v7_dma_inv_range: sub r3, r2, #1 tst r0, r3 bic r0, r0, r3 +#ifdef CONFIG_ARM_ERRATA_764369 + ALT_SMP(W(dsb)) + ALT_UP(W(nop)) +#endif mcrne p15, 0, r0, c7, c14, 1 @ clean & invalidate D / U line tst r1, r3 @@ -270,6 +282,10 @@ v7_dma_clean_range: dcache_line_size r2, r3 sub r3, r2, #1 bic r0, r0, r3 +#ifdef CONFIG_ARM_ERRATA_764369 + ALT_SMP(W(dsb)) + ALT_UP(W(nop)) +#endif 1: mcr p15, 0, r0, c7, c10, 1 @ clean D / U line add r0, r0, r2 @@ -288,6 +304,10 @@ ENTRY(v7_dma_flush_range) dcache_line_size r2, r3 sub r3, r2, #1 bic r0, r0, r3 +#ifdef CONFIG_ARM_ERRATA_764369 + ALT_SMP(W(dsb)) + ALT_UP(W(nop)) +#endif 1: mcr p15, 0, r0, c7, c14, 1 @ clean & invalidate D / U line add r0, r0, r2 diff --git a/arch/arm/mm/dma-mapping.c b/arch/arm/mm/dma-mapping.c index 0a0a1e7..c3ff82f 100644 --- a/arch/arm/mm/dma-mapping.c +++ b/arch/arm/mm/dma-mapping.c @@ -324,6 +324,8 @@ __dma_alloc(struct device *dev, size_t size, dma_addr_t *handle, gfp_t gfp, if (addr) *handle = pfn_to_dma(dev, page_to_pfn(page)); + else + __dma_free_buffer(page, size); return addr; } diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig index 8c5b302..d8973ac 100644 --- a/arch/arm/plat-s3c24xx/Kconfig +++ b/arch/arm/plat-s3c24xx/Kconfig @@ -9,7 +9,6 @@ config PLAT_S3C24XX select NO_IOPORT select ARCH_REQUIRE_GPIOLIB select S3C_DEV_NAND - select S3C_GPIO_CFG_S3C24XX help Base platform code for any Samsung S3C24XX device diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile index 0291bd6..e4f4649 100644 --- a/arch/arm/plat-s3c24xx/Makefile +++ b/arch/arm/plat-s3c24xx/Makefile @@ -15,8 +15,6 @@ obj- := obj-y += cpu.o obj-y += irq.o obj-y += devs.o -obj-y += gpio.o -obj-y += gpiolib.o obj-y += clock.o obj-$(CONFIG_S3C24XX_DCLK) += clock-dclk.o diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c index 539bd0e..53754bcf 100644 --- a/arch/arm/plat-s3c24xx/dma.c +++ b/arch/arm/plat-s3c24xx/dma.c @@ -1094,14 +1094,14 @@ EXPORT_SYMBOL(s3c2410_dma_config); * * configure the dma source/destination hardware type and address * - * source: S3C2410_DMASRC_HW: source is hardware - * S3C2410_DMASRC_MEM: source is memory + * source: DMA_FROM_DEVICE: source is hardware + * DMA_TO_DEVICE: source is memory * * devaddr: physical address of the source */ int s3c2410_dma_devconfig(enum dma_ch channel, - enum s3c2410_dmasrc source, + enum dma_data_direction source, unsigned long devaddr) { struct s3c2410_dma_chan *chan = s3c_dma_lookup_channel(channel); @@ -1131,7 +1131,7 @@ int s3c2410_dma_devconfig(enum dma_ch channel, hwcfg |= S3C2410_DISRCC_INC; switch (source) { - case S3C2410_DMASRC_HW: + case DMA_FROM_DEVICE: /* source is hardware */ pr_debug("%s: hw source, devaddr=%08lx, hwcfg=%d\n", __func__, devaddr, hwcfg); @@ -1142,7 +1142,7 @@ int s3c2410_dma_devconfig(enum dma_ch channel, chan->addr_reg = dma_regaddr(chan, S3C2410_DMA_DIDST); break; - case S3C2410_DMASRC_MEM: + case DMA_TO_DEVICE: /* source is memory */ pr_debug("%s: mem source, devaddr=%08lx, hwcfg=%d\n", __func__, devaddr, hwcfg); diff --git a/arch/arm/plat-s3c24xx/gpio.c b/arch/arm/plat-s3c24xx/gpio.c deleted file mode 100644 index 2f3d7c0..0000000 --- a/arch/arm/plat-s3c24xx/gpio.c +++ /dev/null @@ -1,96 +0,0 @@ -/* linux/arch/arm/plat-s3c24xx/gpio.c - * - * Copyright (c) 2004-2010 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C24XX GPIO support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA -*/ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/gpio.h> -#include <linux/io.h> - -#include <mach/hardware.h> -#include <mach/gpio-fns.h> -#include <asm/irq.h> - -#include <mach/regs-gpio.h> - -#include <plat/gpio-core.h> - -/* gpiolib wrappers until these are totally eliminated */ - -void s3c2410_gpio_pullup(unsigned int pin, unsigned int to) -{ - int ret; - - WARN_ON(to); /* should be none of these left */ - - if (!to) { - /* if pull is enabled, try first with up, and if that - * fails, try using down */ - - ret = s3c_gpio_setpull(pin, S3C_GPIO_PULL_UP); - if (ret) - s3c_gpio_setpull(pin, S3C_GPIO_PULL_DOWN); - } else { - s3c_gpio_setpull(pin, S3C_GPIO_PULL_NONE); - } -} -EXPORT_SYMBOL(s3c2410_gpio_pullup); - -void s3c2410_gpio_setpin(unsigned int pin, unsigned int to) -{ - /* do this via gpiolib until all users removed */ - - gpio_request(pin, "temporary"); - gpio_set_value(pin, to); - gpio_free(pin); -} - -EXPORT_SYMBOL(s3c2410_gpio_setpin); - -unsigned int s3c2410_gpio_getpin(unsigned int pin) -{ - struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin); - unsigned long offs = pin - chip->chip.base; - - return __raw_readl(chip->base + 0x04) & (1<< offs); -} - -EXPORT_SYMBOL(s3c2410_gpio_getpin); - -unsigned int s3c2410_modify_misccr(unsigned int clear, unsigned int change) -{ - unsigned long flags; - unsigned long misccr; - - local_irq_save(flags); - misccr = __raw_readl(S3C24XX_MISCCR); - misccr &= ~clear; - misccr ^= change; - __raw_writel(misccr, S3C24XX_MISCCR); - local_irq_restore(flags); - - return misccr; -} - -EXPORT_SYMBOL(s3c2410_modify_misccr); diff --git a/arch/arm/plat-s3c24xx/gpiolib.c b/arch/arm/plat-s3c24xx/gpiolib.c deleted file mode 100644 index 243b641..0000000 --- a/arch/arm/plat-s3c24xx/gpiolib.c +++ /dev/null @@ -1,229 +0,0 @@ -/* linux/arch/arm/plat-s3c24xx/gpiolib.c - * - * Copyright (c) 2008-2010 Simtec Electronics - * http://armlinux.simtec.co.uk/ - * Ben Dooks <ben@simtec.co.uk> - * - * S3C24XX GPIOlib support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License. -*/ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/sysdev.h> -#include <linux/ioport.h> -#include <linux/io.h> -#include <linux/gpio.h> - -#include <plat/gpio-core.h> -#include <plat/gpio-cfg.h> -#include <plat/gpio-cfg-helpers.h> -#include <mach/hardware.h> -#include <asm/irq.h> -#include <plat/pm.h> - -#include <mach/regs-gpio.h> - -static int s3c24xx_gpiolib_banka_input(struct gpio_chip *chip, unsigned offset) -{ - return -EINVAL; -} - -static int s3c24xx_gpiolib_banka_output(struct gpio_chip *chip, - unsigned offset, int value) -{ - struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); - void __iomem *base = ourchip->base; - unsigned long flags; - unsigned long dat; - unsigned long con; - - local_irq_save(flags); - - con = __raw_readl(base + 0x00); - dat = __raw_readl(base + 0x04); - - dat &= ~(1 << offset); - if (value) - dat |= 1 << offset; - - __raw_writel(dat, base + 0x04); - - con &= ~(1 << offset); - - __raw_writel(con, base + 0x00); - __raw_writel(dat, base + 0x04); - - local_irq_restore(flags); - return 0; -} - -static int s3c24xx_gpiolib_bankf_toirq(struct gpio_chip *chip, unsigned offset) -{ - if (offset < 4) - return IRQ_EINT0 + offset; - - if (offset < 8) - return IRQ_EINT4 + offset - 4; - - return -EINVAL; -} - -static struct s3c_gpio_cfg s3c24xx_gpiocfg_banka = { - .set_config = s3c_gpio_setcfg_s3c24xx_a, - .get_config = s3c_gpio_getcfg_s3c24xx_a, -}; - -struct s3c_gpio_cfg s3c24xx_gpiocfg_default = { - .set_config = s3c_gpio_setcfg_s3c24xx, - .get_config = s3c_gpio_getcfg_s3c24xx, -}; - -struct s3c_gpio_chip s3c24xx_gpios[] = { - [0] = { - .base = S3C2410_GPACON, - .pm = __gpio_pm(&s3c_gpio_pm_1bit), - .config = &s3c24xx_gpiocfg_banka, - .chip = { - .base = S3C2410_GPA(0), - .owner = THIS_MODULE, - .label = "GPIOA", - .ngpio = 24, - .direction_input = s3c24xx_gpiolib_banka_input, - .direction_output = s3c24xx_gpiolib_banka_output, - }, - }, - [1] = { - .base = S3C2410_GPBCON, - .pm = __gpio_pm(&s3c_gpio_pm_2bit), - .chip = { - .base = S3C2410_GPB(0), - .owner = THIS_MODULE, - .label = "GPIOB", - .ngpio = 16, - }, - }, - [2] = { - .base = S3C2410_GPCCON, - .pm = __gpio_pm(&s3c_gpio_pm_2bit), - .chip = { - .base = S3C2410_GPC(0), - .owner = THIS_MODULE, - .label = "GPIOC", - .ngpio = 16, - }, - }, - [3] = { - .base = S3C2410_GPDCON, - .pm = __gpio_pm(&s3c_gpio_pm_2bit), - .chip = { - .base = S3C2410_GPD(0), - .owner = THIS_MODULE, - .label = "GPIOD", - .ngpio = 16, - }, - }, - [4] = { - .base = S3C2410_GPECON, - .pm = __gpio_pm(&s3c_gpio_pm_2bit), - .chip = { - .base = S3C2410_GPE(0), - .label = "GPIOE", - .owner = THIS_MODULE, - .ngpio = 16, - }, - }, - [5] = { - .base = S3C2410_GPFCON, - .pm = __gpio_pm(&s3c_gpio_pm_2bit), - .chip = { - .base = S3C2410_GPF(0), - .owner = THIS_MODULE, - .label = "GPIOF", - .ngpio = 8, - .to_irq = s3c24xx_gpiolib_bankf_toirq, - }, - }, - [6] = { - .base = S3C2410_GPGCON, - .pm = __gpio_pm(&s3c_gpio_pm_2bit), - .irq_base = IRQ_EINT8, - .chip = { - .base = S3C2410_GPG(0), - .owner = THIS_MODULE, - .label = "GPIOG", - .ngpio = 16, - .to_irq = samsung_gpiolib_to_irq, - }, - }, { - .base = S3C2410_GPHCON, - .pm = __gpio_pm(&s3c_gpio_pm_2bit), - .chip = { - .base = S3C2410_GPH(0), - .owner = THIS_MODULE, - .label = "GPIOH", - .ngpio = 11, - }, - }, - /* GPIOS for the S3C2443 and later devices. */ - { - .base = S3C2440_GPJCON, - .pm = __gpio_pm(&s3c_gpio_pm_2bit), - .chip = { - .base = S3C2410_GPJ(0), - .owner = THIS_MODULE, - .label = "GPIOJ", - .ngpio = 16, - }, - }, { - .base = S3C2443_GPKCON, - .pm = __gpio_pm(&s3c_gpio_pm_2bit), - .chip = { - .base = S3C2410_GPK(0), - .owner = THIS_MODULE, - .label = "GPIOK", - .ngpio = 16, - }, - }, { - .base = S3C2443_GPLCON, - .pm = __gpio_pm(&s3c_gpio_pm_2bit), - .chip = { - .base = S3C2410_GPL(0), - .owner = THIS_MODULE, - .label = "GPIOL", - .ngpio = 15, - }, - }, { - .base = S3C2443_GPMCON, - .pm = __gpio_pm(&s3c_gpio_pm_2bit), - .chip = { - .base = S3C2410_GPM(0), - .owner = THIS_MODULE, - .label = "GPIOM", - .ngpio = 2, - }, - }, -}; - - -static __init int s3c24xx_gpiolib_init(void) -{ - struct s3c_gpio_chip *chip = s3c24xx_gpios; - int gpn; - - for (gpn = 0; gpn < ARRAY_SIZE(s3c24xx_gpios); gpn++, chip++) { - if (!chip->config) - chip->config = &s3c24xx_gpiocfg_default; - - s3c_gpiolib_add(chip); - } - - return 0; -} - -core_initcall(s3c24xx_gpiolib_init); diff --git a/arch/arm/plat-s3c24xx/include/mach/clkdev.h b/arch/arm/plat-s3c24xx/include/mach/clkdev.h deleted file mode 100644 index 7dffa83..0000000 --- a/arch/arm/plat-s3c24xx/include/mach/clkdev.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef __MACH_CLKDEV_H__ -#define __MACH_CLKDEV_H__ - -#define __clk_get(clk) ({ 1; }) -#define __clk_put(clk) do {} while (0) - -#endif diff --git a/arch/arm/plat-s3c24xx/include/mach/pwm-clock.h b/arch/arm/plat-s3c24xx/include/mach/pwm-clock.h deleted file mode 100644 index a087de2..0000000 --- a/arch/arm/plat-s3c24xx/include/mach/pwm-clock.h +++ /dev/null @@ -1,55 +0,0 @@ -/* linux/arch/arm/plat-s3c24xx/include/mach/pwm-clock.h - * - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * S3C24xx - pwm clock and timer support - */ - -/** - * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk - * @cfg: The timer TCFG1 register bits shifted down to 0. - * - * Return true if the given configuration from TCFG1 is a TCLK instead - * any of the TDIV clocks. - */ -static inline int pwm_cfg_src_is_tclk(unsigned long tcfg) -{ - return tcfg == S3C2410_TCFG1_MUX_TCLK; -} - -/** - * tcfg_to_divisor() - convert tcfg1 setting to a divisor - * @tcfg1: The tcfg1 setting, shifted down. - * - * Get the divisor value for the given tcfg1 setting. We assume the - * caller has already checked to see if this is not a TCLK source. - */ -static inline unsigned long tcfg_to_divisor(unsigned long tcfg1) -{ - return 1 << (1 + tcfg1); -} - -/** - * pwm_tdiv_has_div1() - does the tdiv setting have a /1 - * - * Return true if we have a /1 in the tdiv setting. - */ -static inline unsigned int pwm_tdiv_has_div1(void) -{ - return 0; -} - -/** - * pwm_tdiv_div_bits() - calculate TCFG1 divisor value. - * @div: The divisor to calculate the bit information for. - * - * Turn a divisor into the necessary bit field for TCFG1. - */ -static inline unsigned long pwm_tdiv_div_bits(unsigned int div) -{ - return ilog2(div) - 1; -} - -#define S3C_TCFG1_MUX_TCLK S3C2410_TCFG1_MUX_TCLK diff --git a/arch/arm/plat-s3c24xx/include/plat/map.h b/arch/arm/plat-s3c24xx/include/plat/map.h deleted file mode 100644 index bd534d3..0000000 --- a/arch/arm/plat-s3c24xx/include/plat/map.h +++ /dev/null @@ -1,100 +0,0 @@ -/* linux/include/asm-arm/plat-s3c24xx/map.h - * - * Copyright (c) 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * - * S3C24XX - Memory map definitions - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#ifndef __ASM_PLAT_S3C24XX_MAP_H -#define __ASM_PLAT_S3C24XX_MAP_H - -/* interrupt controller is the first thing we put in, to make - * the assembly code for the irq detection easier - */ -#define S3C24XX_VA_IRQ S3C_VA_IRQ -#define S3C2410_PA_IRQ (0x4A000000) -#define S3C24XX_SZ_IRQ SZ_1M - -/* memory controller registers */ -#define S3C24XX_VA_MEMCTRL S3C_VA_MEM -#define S3C2410_PA_MEMCTRL (0x48000000) -#define S3C24XX_SZ_MEMCTRL SZ_1M - -/* UARTs */ -#define S3C24XX_VA_UART S3C_VA_UART -#define S3C2410_PA_UART (0x50000000) -#define S3C24XX_SZ_UART SZ_1M -#define S3C_UART_OFFSET (0x4000) - -#define S3C_VA_UARTx(uart) (S3C_VA_UART + ((uart * S3C_UART_OFFSET))) - -/* Timers */ -#define S3C24XX_VA_TIMER S3C_VA_TIMER -#define S3C2410_PA_TIMER (0x51000000) -#define S3C24XX_SZ_TIMER SZ_1M - -/* Clock and Power management */ -#define S3C24XX_VA_CLKPWR S3C_VA_SYS -#define S3C24XX_SZ_CLKPWR SZ_1M - -/* USB Device port */ -#define S3C2410_PA_USBDEV (0x52000000) -#define S3C24XX_SZ_USBDEV SZ_1M - -/* Watchdog */ -#define S3C24XX_VA_WATCHDOG S3C_VA_WATCHDOG -#define S3C2410_PA_WATCHDOG (0x53000000) -#define S3C24XX_SZ_WATCHDOG SZ_1M - -/* Standard size definitions for peripheral blocks. */ - -#define S3C24XX_SZ_IIS SZ_1M -#define S3C24XX_SZ_ADC SZ_1M -#define S3C24XX_SZ_SPI SZ_1M -#define S3C24XX_SZ_SDI SZ_1M -#define S3C24XX_SZ_NAND SZ_1M - -/* GPIO ports */ - -/* the calculation for the VA of this must ensure that - * it is the same distance apart from the UART in the - * phsyical address space, as the initial mapping for the IO - * is done as a 1:1 mapping. This puts it (currently) at - * 0xFA800000, which is not in the way of any current mapping - * by the base system. -*/ - -#define S3C2410_PA_GPIO (0x56000000) -#define S3C24XX_VA_GPIO ((S3C24XX_PA_GPIO - S3C24XX_PA_UART) + S3C24XX_VA_UART) -#define S3C24XX_SZ_GPIO SZ_1M - - -/* ISA style IO, for each machine to sort out mappings for, if it - * implements it. We reserve two 16M regions for ISA. - */ - -#define S3C24XX_VA_ISA_WORD S3C2410_ADDR(0x02000000) -#define S3C24XX_VA_ISA_BYTE S3C2410_ADDR(0x03000000) - -/* deal with the registers that move under the 2412/2413 */ - -#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413) -#ifndef __ASSEMBLY__ -extern void __iomem *s3c24xx_va_gpio2; -#endif -#ifdef CONFIG_CPU_S3C2412_ONLY -#define S3C24XX_VA_GPIO2 (S3C24XX_VA_GPIO + 0x10) -#else -#define S3C24XX_VA_GPIO2 s3c24xx_va_gpio2 -#endif -#else -#define s3c24xx_va_gpio2 S3C24XX_VA_GPIO -#define S3C24XX_VA_GPIO2 S3C24XX_VA_GPIO -#endif - -#endif /* __ASM_PLAT_S3C24XX_MAP_H */ diff --git a/arch/arm/plat-s3c24xx/include/plat/pll.h b/arch/arm/plat-s3c24xx/include/plat/pll.h deleted file mode 100644 index 005729a..0000000 --- a/arch/arm/plat-s3c24xx/include/plat/pll.h +++ /dev/null @@ -1,62 +0,0 @@ -/* linux/arch/arm/plat-s3c24xx/include/plat/pll.h - * - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * S3C24xx - common pll registers and code - */ - -#define S3C24XX_PLLCON_MDIVSHIFT 12 -#define S3C24XX_PLLCON_PDIVSHIFT 4 -#define S3C24XX_PLLCON_SDIVSHIFT 0 -#define S3C24XX_PLLCON_MDIVMASK ((1<<(1+(19-12)))-1) -#define S3C24XX_PLLCON_PDIVMASK ((1<<5)-1) -#define S3C24XX_PLLCON_SDIVMASK 3 - -#include <asm/div64.h> - -static inline unsigned int -s3c24xx_get_pll(unsigned int pllval, unsigned int baseclk) -{ - unsigned int mdiv, pdiv, sdiv; - uint64_t fvco; - - mdiv = pllval >> S3C24XX_PLLCON_MDIVSHIFT; - pdiv = pllval >> S3C24XX_PLLCON_PDIVSHIFT; - sdiv = pllval >> S3C24XX_PLLCON_SDIVSHIFT; - - mdiv &= S3C24XX_PLLCON_MDIVMASK; - pdiv &= S3C24XX_PLLCON_PDIVMASK; - sdiv &= S3C24XX_PLLCON_SDIVMASK; - - fvco = (uint64_t)baseclk * (mdiv + 8); - do_div(fvco, (pdiv + 2) << sdiv); - - return (unsigned int)fvco; -} - -#define S3C2416_PLL_M_SHIFT (14) -#define S3C2416_PLL_P_SHIFT (5) -#define S3C2416_PLL_S_MASK (7) -#define S3C2416_PLL_M_MASK ((1 << 10) - 1) -#define S3C2416_PLL_P_MASK (63) - -static inline unsigned int -s3c2416_get_pll(unsigned int pllval, unsigned int baseclk) -{ - unsigned int m, p, s; - uint64_t fvco; - - m = pllval >> S3C2416_PLL_M_SHIFT; - p = pllval >> S3C2416_PLL_P_SHIFT; - - s = pllval & S3C2416_PLL_S_MASK; - m &= S3C2416_PLL_M_MASK; - p &= S3C2416_PLL_P_MASK; - - fvco = (uint64_t)baseclk * m; - do_div(fvco, (p << s)); - - return (unsigned int)fvco; -} diff --git a/arch/arm/plat-s3c24xx/include/plat/regs-iis.h b/arch/arm/plat-s3c24xx/include/plat/regs-iis.h deleted file mode 100644 index cc44e0e..0000000 --- a/arch/arm/plat-s3c24xx/include/plat/regs-iis.h +++ /dev/null @@ -1,68 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/regs-iis.h - * - * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk> - * http://www.simtec.co.uk/products/SWLINUX/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C2410 IIS register definition -*/ - -#ifndef __ASM_ARCH_REGS_IIS_H -#define __ASM_ARCH_REGS_IIS_H - -#define S3C2410_IISCON (0x00) - -#define S3C2410_IISCON_LRINDEX (1<<8) -#define S3C2410_IISCON_TXFIFORDY (1<<7) -#define S3C2410_IISCON_RXFIFORDY (1<<6) -#define S3C2410_IISCON_TXDMAEN (1<<5) -#define S3C2410_IISCON_RXDMAEN (1<<4) -#define S3C2410_IISCON_TXIDLE (1<<3) -#define S3C2410_IISCON_RXIDLE (1<<2) -#define S3C2410_IISCON_PSCEN (1<<1) -#define S3C2410_IISCON_IISEN (1<<0) - -#define S3C2410_IISMOD (0x04) - -#define S3C2440_IISMOD_MPLL (1<<9) -#define S3C2410_IISMOD_SLAVE (1<<8) -#define S3C2410_IISMOD_NOXFER (0<<6) -#define S3C2410_IISMOD_RXMODE (1<<6) -#define S3C2410_IISMOD_TXMODE (2<<6) -#define S3C2410_IISMOD_TXRXMODE (3<<6) -#define S3C2410_IISMOD_LR_LLOW (0<<5) -#define S3C2410_IISMOD_LR_RLOW (1<<5) -#define S3C2410_IISMOD_IIS (0<<4) -#define S3C2410_IISMOD_MSB (1<<4) -#define S3C2410_IISMOD_8BIT (0<<3) -#define S3C2410_IISMOD_16BIT (1<<3) -#define S3C2410_IISMOD_BITMASK (1<<3) -#define S3C2410_IISMOD_256FS (0<<2) -#define S3C2410_IISMOD_384FS (1<<2) -#define S3C2410_IISMOD_16FS (0<<0) -#define S3C2410_IISMOD_32FS (1<<0) -#define S3C2410_IISMOD_48FS (2<<0) -#define S3C2410_IISMOD_FS_MASK (3<<0) - -#define S3C2410_IISPSR (0x08) -#define S3C2410_IISPSR_INTMASK (31<<5) -#define S3C2410_IISPSR_INTSHIFT (5) -#define S3C2410_IISPSR_EXTMASK (31<<0) -#define S3C2410_IISPSR_EXTSHFIT (0) - -#define S3C2410_IISFCON (0x0c) - -#define S3C2410_IISFCON_TXDMA (1<<15) -#define S3C2410_IISFCON_RXDMA (1<<14) -#define S3C2410_IISFCON_TXENABLE (1<<13) -#define S3C2410_IISFCON_RXENABLE (1<<12) -#define S3C2410_IISFCON_TXMASK (0x3f << 6) -#define S3C2410_IISFCON_TXSHIFT (6) -#define S3C2410_IISFCON_RXMASK (0x3f) -#define S3C2410_IISFCON_RXSHIFT (0) - -#define S3C2410_IISFIFO (0x10) -#endif /* __ASM_ARCH_REGS_IIS_H */ diff --git a/arch/arm/plat-s3c24xx/include/plat/regs-spi.h b/arch/arm/plat-s3c24xx/include/plat/regs-spi.h deleted file mode 100644 index 892e2f6..0000000 --- a/arch/arm/plat-s3c24xx/include/plat/regs-spi.h +++ /dev/null @@ -1,81 +0,0 @@ -/* arch/arm/mach-s3c2410/include/mach/regs-spi.h - * - * Copyright (c) 2004 Fetron GmbH - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - * - * S3C2410 SPI register definition -*/ - -#ifndef __ASM_ARCH_REGS_SPI_H -#define __ASM_ARCH_REGS_SPI_H - -#define S3C2410_SPI1 (0x20) -#define S3C2412_SPI1 (0x100) - -#define S3C2410_SPCON (0x00) - -#define S3C2412_SPCON_RXFIFO_RB2 (0<<14) -#define S3C2412_SPCON_RXFIFO_RB4 (1<<14) -#define S3C2412_SPCON_RXFIFO_RB12 (2<<14) -#define S3C2412_SPCON_RXFIFO_RB14 (3<<14) -#define S3C2412_SPCON_TXFIFO_RB2 (0<<12) -#define S3C2412_SPCON_TXFIFO_RB4 (1<<12) -#define S3C2412_SPCON_TXFIFO_RB12 (2<<12) -#define S3C2412_SPCON_TXFIFO_RB14 (3<<12) -#define S3C2412_SPCON_RXFIFO_RESET (1<<11) /* RxFIFO reset */ -#define S3C2412_SPCON_TXFIFO_RESET (1<<10) /* TxFIFO reset */ -#define S3C2412_SPCON_RXFIFO_EN (1<<9) /* RxFIFO Enable */ -#define S3C2412_SPCON_TXFIFO_EN (1<<8) /* TxFIFO Enable */ - -#define S3C2412_SPCON_DIRC_RX (1<<7) - -#define S3C2410_SPCON_SMOD_DMA (2<<5) /* DMA mode */ -#define S3C2410_SPCON_SMOD_INT (1<<5) /* interrupt mode */ -#define S3C2410_SPCON_SMOD_POLL (0<<5) /* polling mode */ -#define S3C2410_SPCON_ENSCK (1<<4) /* Enable SCK */ -#define S3C2410_SPCON_MSTR (1<<3) /* Master/Slave select - 0: slave, 1: master */ -#define S3C2410_SPCON_CPOL_HIGH (1<<2) /* Clock polarity select */ -#define S3C2410_SPCON_CPOL_LOW (0<<2) /* Clock polarity select */ - -#define S3C2410_SPCON_CPHA_FMTB (1<<1) /* Clock Phase Select */ -#define S3C2410_SPCON_CPHA_FMTA (0<<1) /* Clock Phase Select */ - -#define S3C2410_SPCON_TAGD (1<<0) /* Tx auto garbage data mode */ - - -#define S3C2410_SPSTA (0x04) - -#define S3C2412_SPSTA_RXFIFO_AE (1<<11) -#define S3C2412_SPSTA_TXFIFO_AE (1<<10) -#define S3C2412_SPSTA_RXFIFO_ERROR (1<<9) -#define S3C2412_SPSTA_TXFIFO_ERROR (1<<8) -#define S3C2412_SPSTA_RXFIFO_FIFO (1<<7) -#define S3C2412_SPSTA_RXFIFO_EMPTY (1<<6) -#define S3C2412_SPSTA_TXFIFO_NFULL (1<<5) -#define S3C2412_SPSTA_TXFIFO_EMPTY (1<<4) - -#define S3C2410_SPSTA_DCOL (1<<2) /* Data Collision Error */ -#define S3C2410_SPSTA_MULD (1<<1) /* Multi Master Error */ -#define S3C2410_SPSTA_READY (1<<0) /* Data Tx/Rx ready */ -#define S3C2412_SPSTA_READY_ORG (1<<3) - -#define S3C2410_SPPIN (0x08) - -#define S3C2410_SPPIN_ENMUL (1<<2) /* Multi Master Error detect */ -#define S3C2410_SPPIN_RESERVED (1<<1) -#define S3C2410_SPPIN_KEEP (1<<0) /* Master Out keep */ - -#define S3C2410_SPPRE (0x0C) -#define S3C2410_SPTDAT (0x10) -#define S3C2410_SPRDAT (0x14) - -#define S3C2412_TXFIFO (0x18) -#define S3C2412_RXFIFO (0x18) -#define S3C2412_SPFIC (0x24) - - -#endif /* __ASM_ARCH_REGS_SPI_H */ diff --git a/arch/arm/plat-s3c24xx/s3c2443-clock.c b/arch/arm/plat-s3c24xx/s3c2443-clock.c index 59552c0..07a4c81 100644 --- a/arch/arm/plat-s3c24xx/s3c2443-clock.c +++ b/arch/arm/plat-s3c24xx/s3c2443-clock.c @@ -205,9 +205,64 @@ static struct clksrc_clk clksrc_clks[] = { }, }; +static struct clk clk_i2s_ext = { + .name = "i2s-ext", +}; + +/* i2s_eplldiv + * + * This clock is the output from the I2S divisor of ESYSCLK, and is separate + * from the mux that comes after it (cannot merge into one single clock) +*/ + +static struct clksrc_clk clk_i2s_eplldiv = { + .clk = { + .name = "i2s-eplldiv", + .parent = &clk_esysclk.clk, + }, + .reg_div = { .reg = S3C2443_CLKDIV1, .size = 4, .shift = 12, }, +}; + +/* i2s-ref + * + * i2s bus reference clock, selectable from external, esysclk or epllref + * + * Note, this used to be two clocks, but was compressed into one. +*/ + +static struct clk *clk_i2s_srclist[] = { + [0] = &clk_i2s_eplldiv.clk, + [1] = &clk_i2s_ext, + [2] = &clk_epllref.clk, + [3] = &clk_epllref.clk, +}; + +static struct clksrc_clk clk_i2s = { + .clk = { + .name = "i2s-if", + .ctrlbit = S3C2443_SCLKCON_I2SCLK, + .enable = s3c2443_clkcon_enable_s, + + }, + .sources = &(struct clksrc_sources) { + .sources = clk_i2s_srclist, + .nr_sources = ARRAY_SIZE(clk_i2s_srclist), + }, + .reg_src = { .reg = S3C2443_CLKSRC, .size = 2, .shift = 14 }, +}; static struct clk init_clocks_off[] = { { + .name = "iis", + .parent = &clk_p, + .enable = s3c2443_clkcon_enable_p, + .ctrlbit = S3C2443_PCLKCON_IIS, + }, { + .name = "hsspi", + .parent = &clk_p, + .enable = s3c2443_clkcon_enable_p, + .ctrlbit = S3C2443_PCLKCON_HSSPI, + }, { .name = "adc", .parent = &clk_p, .enable = s3c2443_clkcon_enable_p, @@ -406,6 +461,8 @@ static struct clk *clks[] __initdata = { }; static struct clksrc_clk *clksrcs[] __initdata = { + &clk_i2s_eplldiv, + &clk_i2s, &clk_usb_bus_host, &clk_epllref, &clk_esysclk, diff --git a/arch/arm/plat-s5p/Kconfig b/arch/arm/plat-s5p/Kconfig index 9843c95..f9241a7 100644 --- a/arch/arm/plat-s5p/Kconfig +++ b/arch/arm/plat-s5p/Kconfig @@ -16,9 +16,6 @@ config PLAT_S5P select S3C_GPIO_TRACK select S5P_GPIO_DRVSTR select SAMSUNG_GPIOLIB_4BIT - select S3C_GPIO_CFG_S3C64XX - select S3C_GPIO_PULL_UPDOWN - select S3C_GPIO_CFG_S3C24XX select PLAT_SAMSUNG select SAMSUNG_CLKSRC select SAMSUNG_IRQ_VIC_TIMER @@ -76,6 +73,11 @@ config S5P_DEV_FIMD0 help Compile in platform device definitions for FIMD controller 0 +config S5P_DEV_I2C_HDMIPHY + bool + help + Compile in platform device definitions for I2C HDMIPHY controller + config S5P_DEV_MFC bool help @@ -96,6 +98,11 @@ config S5P_DEV_CSIS1 help Compile in platform device definitions for MIPI-CSIS channel 1 +config S5P_DEV_TV + bool + help + Compile in platform device definition for TV interface + config S5P_DEV_USB_EHCI bool help diff --git a/arch/arm/plat-s5p/Makefile b/arch/arm/plat-s5p/Makefile index 4b53e04..1812019 100644 --- a/arch/arm/plat-s5p/Makefile +++ b/arch/arm/plat-s5p/Makefile @@ -31,8 +31,10 @@ obj-$(CONFIG_S5P_DEV_FIMC1) += dev-fimc1.o obj-$(CONFIG_S5P_DEV_FIMC2) += dev-fimc2.o obj-$(CONFIG_S5P_DEV_FIMC3) += dev-fimc3.o obj-$(CONFIG_S5P_DEV_FIMD0) += dev-fimd0.o +obj-$(CONFIG_S5P_DEV_I2C_HDMIPHY) += dev-i2c-hdmiphy.o obj-$(CONFIG_S5P_DEV_ONENAND) += dev-onenand.o obj-$(CONFIG_S5P_DEV_CSIS0) += dev-csis0.o obj-$(CONFIG_S5P_DEV_CSIS1) += dev-csis1.o +obj-$(CONFIG_S5P_DEV_TV) += dev-tv.o obj-$(CONFIG_S5P_DEV_USB_EHCI) += dev-ehci.o obj-$(CONFIG_S5P_SETUP_MIPIPHY) += setup-mipiphy.o diff --git a/arch/arm/plat-s5p/dev-i2c-hdmiphy.c b/arch/arm/plat-s5p/dev-i2c-hdmiphy.c new file mode 100644 index 0000000..37343f1 --- /dev/null +++ b/arch/arm/plat-s5p/dev-i2c-hdmiphy.c @@ -0,0 +1,59 @@ +/* + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * S5P series device definition for i2c for hdmiphy device + * + * Based on plat-samsung/dev-i2c7.c + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/gfp.h> +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/platform_device.h> + +#include <mach/irqs.h> +#include <mach/map.h> +#include <mach/i2c-hdmiphy.h> + +#include <plat/regs-iic.h> +#include <plat/devs.h> +#include <plat/cpu.h> +#include <plat/iic.h> + +static struct resource s5p_i2c_resource[] = { + [0] = { + .start = S5P_PA_IIC_HDMIPHY, + .end = S5P_PA_IIC_HDMIPHY + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_IIC_HDMIPHY, + .end = IRQ_IIC_HDMIPHY, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device s5p_device_i2c_hdmiphy = { + .name = "s3c2440-hdmiphy-i2c", + .id = -1, + .num_resources = ARRAY_SIZE(s5p_i2c_resource), + .resource = s5p_i2c_resource, +}; + +void __init s5p_i2c_hdmiphy_set_platdata(struct s3c2410_platform_i2c *pd) +{ + struct s3c2410_platform_i2c *npd; + + if (!pd) { + pd = &default_i2c_data; + pd->bus_num = S5P_I2C_HDMIPHY_BUS_NUM; + } + + npd = s3c_set_platdata(pd, sizeof(struct s3c2410_platform_i2c), + &s5p_device_i2c_hdmiphy); +} diff --git a/arch/arm/plat-s5p/dev-tv.c b/arch/arm/plat-s5p/dev-tv.c new file mode 100644 index 0000000..361a1b6 --- /dev/null +++ b/arch/arm/plat-s5p/dev-tv.c @@ -0,0 +1,98 @@ +/* linux/arch/arm/plat-s5p/dev-tv.c + * + * Copyright (C) 2011 Samsung Electronics Co.Ltd + * Author: Tomasz Stanislawski <t.stanislaws@samsung.com> + * + * S5P series device definition for TV device + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/dma-mapping.h> + +#include <mach/irqs.h> +#include <mach/map.h> + +#include <plat/devs.h> + +/* HDMI interface */ +static struct resource s5p_hdmi_resources[] = { + [0] = { + .start = S5P_PA_HDMI, + .end = S5P_PA_HDMI + SZ_1M - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_HDMI, + .end = IRQ_HDMI, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device s5p_device_hdmi = { + .name = "s5p-hdmi", + .id = -1, + .num_resources = ARRAY_SIZE(s5p_hdmi_resources), + .resource = s5p_hdmi_resources, +}; +EXPORT_SYMBOL(s5p_device_hdmi); + +/* SDO interface */ +static struct resource s5p_sdo_resources[] = { + [0] = { + .start = S5P_PA_SDO, + .end = S5P_PA_SDO + SZ_64K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_SDO, + .end = IRQ_SDO, + .flags = IORESOURCE_IRQ, + } +}; + +struct platform_device s5p_device_sdo = { + .name = "s5p-sdo", + .id = -1, + .num_resources = ARRAY_SIZE(s5p_sdo_resources), + .resource = s5p_sdo_resources, +}; +EXPORT_SYMBOL(s5p_device_sdo); + +/* MIXER */ +static struct resource s5p_mixer_resources[] = { + [0] = { + .start = S5P_PA_MIXER, + .end = S5P_PA_MIXER + SZ_64K - 1, + .flags = IORESOURCE_MEM, + .name = "mxr" + }, + [1] = { + .start = S5P_PA_VP, + .end = S5P_PA_VP + SZ_64K - 1, + .flags = IORESOURCE_MEM, + .name = "vp" + }, + [2] = { + .start = IRQ_MIXER, + .end = IRQ_MIXER, + .flags = IORESOURCE_IRQ, + .name = "irq" + } +}; + +static u64 s5p_tv_dmamask = DMA_BIT_MASK(32); + +struct platform_device s5p_device_mixer = { + .name = "s5p-mixer", + .id = -1, + .num_resources = ARRAY_SIZE(s5p_mixer_resources), + .resource = s5p_mixer_resources, + .dev = { + .coherent_dma_mask = DMA_BIT_MASK(32), + .dma_mask = &s5p_tv_dmamask, + } +}; +EXPORT_SYMBOL(s5p_device_mixer); diff --git a/arch/arm/plat-s5p/irq-gpioint.c b/arch/arm/plat-s5p/irq-gpioint.c index f71078e..a566523 100644 --- a/arch/arm/plat-s5p/irq-gpioint.c +++ b/arch/arm/plat-s5p/irq-gpioint.c @@ -37,7 +37,7 @@ struct s5p_gpioint_bank { int start; int nr_groups; int irq; - struct s3c_gpio_chip **chips; + struct samsung_gpio_chip **chips; void (*handler)(unsigned int, struct irq_desc *); }; @@ -87,7 +87,7 @@ static void s5p_gpioint_handler(unsigned int irq, struct irq_desc *desc) chained_irq_enter(chip, desc); for (group = 0; group < bank->nr_groups; group++) { - struct s3c_gpio_chip *chip = bank->chips[group]; + struct samsung_gpio_chip *chip = bank->chips[group]; if (!chip) continue; @@ -110,27 +110,28 @@ static void s5p_gpioint_handler(unsigned int irq, struct irq_desc *desc) chained_irq_exit(chip, desc); } -static __init int s5p_gpioint_add(struct s3c_gpio_chip *chip) +static __init int s5p_gpioint_add(struct samsung_gpio_chip *chip) { static int used_gpioint_groups = 0; int group = chip->group; - struct s5p_gpioint_bank *bank = NULL; + struct s5p_gpioint_bank *b, *bank = NULL; struct irq_chip_generic *gc; struct irq_chip_type *ct; if (used_gpioint_groups >= S5P_GPIOINT_GROUP_COUNT) return -ENOMEM; - list_for_each_entry(bank, &banks, list) { - if (group >= bank->start && - group < bank->start + bank->nr_groups) + list_for_each_entry(b, &banks, list) { + if (group >= b->start && group < b->start + b->nr_groups) { + bank = b; break; + } } if (!bank) return -EINVAL; if (!bank->handler) { - bank->chips = kzalloc(sizeof(struct s3c_gpio_chip *) * + bank->chips = kzalloc(sizeof(struct samsung_gpio_chip *) * bank->nr_groups, GFP_KERNEL); if (!bank->chips) return -ENOMEM; @@ -173,7 +174,7 @@ static __init int s5p_gpioint_add(struct s3c_gpio_chip *chip) int __init s5p_register_gpio_interrupt(int pin) { - struct s3c_gpio_chip *my_chip = s3c_gpiolib_getchip(pin); + struct samsung_gpio_chip *my_chip = samsung_gpiolib_getchip(pin); int offset, group; int ret; diff --git a/arch/arm/plat-samsung/Kconfig b/arch/arm/plat-samsung/Kconfig index b3e1065..74714c1 100644 --- a/arch/arm/plat-samsung/Kconfig +++ b/arch/arm/plat-samsung/Kconfig @@ -79,39 +79,12 @@ config SAMSUNG_GPIOLIB_4BIT configuration. GPIOlib shall be compiled only for S3C64XX and S5P series of processors. -config S3C_GPIO_CFG_S3C24XX - bool - help - Internal configuration to enable S3C24XX style GPIO configuration - functions. - config S3C_GPIO_CFG_S3C64XX bool help Internal configuration to enable S3C64XX style GPIO configuration functions. -config S3C_GPIO_PULL_UPDOWN - bool - help - Internal configuration to enable the correct GPIO pull helper - -config S3C_GPIO_PULL_S3C2443 - bool - select S3C_GPIO_PULL_UPDOWN - help - Internal configuration to enable the correct GPIO pull helper for S3C2443-style GPIO - -config S3C_GPIO_PULL_DOWN - bool - help - Internal configuration to enable the correct GPIO pull helper - -config S3C_GPIO_PULL_UP - bool - help - Internal configuration to enable the correct GPIO pull helper - config S5P_GPIO_DRVSTR bool help @@ -300,11 +273,14 @@ config S3C_DMA help Internal configuration for S3C DMA core -config S3C_PL330_DMA +config SAMSUNG_DMADEV bool - select PL330 + select DMADEVICES + select PL330_DMA if (CPU_EXYNOS4210 || CPU_S5PV210 || CPU_S5PC100 || \ + CPU_S5P6450 || CPU_S5P6440) + select ARM_AMBA help - S3C DMA API Driver for PL330 DMAC. + Use DMA device engine for PL330 DMAC. comment "Power management" diff --git a/arch/arm/plat-samsung/Makefile b/arch/arm/plat-samsung/Makefile index 3de756d..5a54354 100644 --- a/arch/arm/plat-samsung/Makefile +++ b/arch/arm/plat-samsung/Makefile @@ -15,8 +15,6 @@ obj-y += init.o cpu.o obj-$(CONFIG_ARCH_USES_GETTIMEOFFSET) += time.o obj-y += clock.o obj-y += pwm-clock.o -obj-y += gpio.o -obj-y += gpio-config.o obj-y += dev-asocdma.o obj-$(CONFIG_SAMSUNG_CLKSRC) += clock-clksrc.o @@ -63,9 +61,9 @@ obj-$(CONFIG_SAMSUNG_DEV_BACKLIGHT) += dev-backlight.o # DMA support -obj-$(CONFIG_S3C_DMA) += dma.o +obj-$(CONFIG_S3C_DMA) += dma.o s3c-dma-ops.o -obj-$(CONFIG_S3C_PL330_DMA) += s3c-pl330.o +obj-$(CONFIG_SAMSUNG_DMADEV) += dma-ops.o # PM support diff --git a/arch/arm/plat-samsung/dev-hsmmc.c b/arch/arm/plat-samsung/dev-hsmmc.c index db7a65c..06825c4 100644 --- a/arch/arm/plat-samsung/dev-hsmmc.c +++ b/arch/arm/plat-samsung/dev-hsmmc.c @@ -58,22 +58,5 @@ struct platform_device s3c_device_hsmmc0 = { void s3c_sdhci0_set_platdata(struct s3c_sdhci_platdata *pd) { - struct s3c_sdhci_platdata *set = &s3c_hsmmc0_def_platdata; - - set->cd_type = pd->cd_type; - set->ext_cd_init = pd->ext_cd_init; - set->ext_cd_cleanup = pd->ext_cd_cleanup; - set->ext_cd_gpio = pd->ext_cd_gpio; - set->ext_cd_gpio_invert = pd->ext_cd_gpio_invert; - - if (pd->max_width) - set->max_width = pd->max_width; - if (pd->cfg_gpio) - set->cfg_gpio = pd->cfg_gpio; - if (pd->cfg_card) - set->cfg_card = pd->cfg_card; - if (pd->host_caps) - set->host_caps |= pd->host_caps; - if (pd->clk_type) - set->clk_type = pd->clk_type; + s3c_sdhci_set_platdata(pd, &s3c_hsmmc0_def_platdata); } diff --git a/arch/arm/plat-samsung/dev-hsmmc1.c b/arch/arm/plat-samsung/dev-hsmmc1.c index 2497321..4524ef4 100644 --- a/arch/arm/plat-samsung/dev-hsmmc1.c +++ b/arch/arm/plat-samsung/dev-hsmmc1.c @@ -58,22 +58,5 @@ struct platform_device s3c_device_hsmmc1 = { void s3c_sdhci1_set_platdata(struct s3c_sdhci_platdata *pd) { - struct s3c_sdhci_platdata *set = &s3c_hsmmc1_def_platdata; - - set->cd_type = pd->cd_type; - set->ext_cd_init = pd->ext_cd_init; - set->ext_cd_cleanup = pd->ext_cd_cleanup; - set->ext_cd_gpio = pd->ext_cd_gpio; - set->ext_cd_gpio_invert = pd->ext_cd_gpio_invert; - - if (pd->max_width) - set->max_width = pd->max_width; - if (pd->cfg_gpio) - set->cfg_gpio = pd->cfg_gpio; - if (pd->cfg_card) - set->cfg_card = pd->cfg_card; - if (pd->host_caps) - set->host_caps |= pd->host_caps; - if (pd->clk_type) - set->clk_type = pd->clk_type; + s3c_sdhci_set_platdata(pd, &s3c_hsmmc1_def_platdata); } diff --git a/arch/arm/plat-samsung/dev-hsmmc2.c b/arch/arm/plat-samsung/dev-hsmmc2.c index f60aedb..9cede96 100644 --- a/arch/arm/plat-samsung/dev-hsmmc2.c +++ b/arch/arm/plat-samsung/dev-hsmmc2.c @@ -59,22 +59,5 @@ struct platform_device s3c_device_hsmmc2 = { void s3c_sdhci2_set_platdata(struct s3c_sdhci_platdata *pd) { - struct s3c_sdhci_platdata *set = &s3c_hsmmc2_def_platdata; - - set->cd_type = pd->cd_type; - set->ext_cd_init = pd->ext_cd_init; - set->ext_cd_cleanup = pd->ext_cd_cleanup; - set->ext_cd_gpio = pd->ext_cd_gpio; - set->ext_cd_gpio_invert = pd->ext_cd_gpio_invert; - - if (pd->max_width) - set->max_width = pd->max_width; - if (pd->cfg_gpio) - set->cfg_gpio = pd->cfg_gpio; - if (pd->cfg_card) - set->cfg_card = pd->cfg_card; - if (pd->host_caps) - set->host_caps |= pd->host_caps; - if (pd->clk_type) - set->clk_type = pd->clk_type; + s3c_sdhci_set_platdata(pd, &s3c_hsmmc2_def_platdata); } diff --git a/arch/arm/plat-samsung/dev-hsmmc3.c b/arch/arm/plat-samsung/dev-hsmmc3.c index ede776f..0358ef4 100644 --- a/arch/arm/plat-samsung/dev-hsmmc3.c +++ b/arch/arm/plat-samsung/dev-hsmmc3.c @@ -62,22 +62,5 @@ struct platform_device s3c_device_hsmmc3 = { void s3c_sdhci3_set_platdata(struct s3c_sdhci_platdata *pd) { - struct s3c_sdhci_platdata *set = &s3c_hsmmc3_def_platdata; - - set->cd_type = pd->cd_type; - set->ext_cd_init = pd->ext_cd_init; - set->ext_cd_cleanup = pd->ext_cd_cleanup; - set->ext_cd_gpio = pd->ext_cd_gpio; - set->ext_cd_gpio_invert = pd->ext_cd_gpio_invert; - - if (pd->max_width) - set->max_width = pd->max_width; - if (pd->cfg_gpio) - set->cfg_gpio = pd->cfg_gpio; - if (pd->cfg_card) - set->cfg_card = pd->cfg_card; - if (pd->host_caps) - set->host_caps |= pd->host_caps; - if (pd->clk_type) - set->clk_type = pd->clk_type; + s3c_sdhci_set_platdata(pd, &s3c_hsmmc3_def_platdata); } diff --git a/arch/arm/plat-samsung/dev-ts.c b/arch/arm/plat-samsung/dev-ts.c index 82543f0..5f3d46a 100644 --- a/arch/arm/plat-samsung/dev-ts.c +++ b/arch/arm/plat-samsung/dev-ts.c @@ -43,8 +43,17 @@ struct platform_device s3c_device_ts = { .resource = s3c_ts_resource, }; +static struct s3c2410_ts_mach_info default_ts_data __initdata = { + .delay = 10000, + .presc = 49, + .oversampling_shift = 2, +}; + void __init s3c24xx_ts_set_platdata(struct s3c2410_ts_mach_info *pd) { + if (!pd) + pd = &default_ts_data; + s3c_set_platdata(pd, sizeof(struct s3c2410_ts_mach_info), &s3c_device_ts); } diff --git a/arch/arm/plat-samsung/dma-ops.c b/arch/arm/plat-samsung/dma-ops.c new file mode 100644 index 0000000..6e3d9ab --- /dev/null +++ b/arch/arm/plat-samsung/dma-ops.c @@ -0,0 +1,131 @@ +/* linux/arch/arm/plat-samsung/dma-ops.c + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Samsung DMA Operations + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/amba/pl330.h> +#include <linux/scatterlist.h> + +#include <mach/dma.h> + +static inline bool pl330_filter(struct dma_chan *chan, void *param) +{ + struct dma_pl330_peri *peri = chan->private; + return peri->peri_id == (unsigned)param; +} + +static unsigned samsung_dmadev_request(enum dma_ch dma_ch, + struct samsung_dma_info *info) +{ + struct dma_chan *chan; + dma_cap_mask_t mask; + struct dma_slave_config slave_config; + + dma_cap_zero(mask); + dma_cap_set(info->cap, mask); + + chan = dma_request_channel(mask, pl330_filter, (void *)dma_ch); + + if (info->direction == DMA_FROM_DEVICE) { + memset(&slave_config, 0, sizeof(struct dma_slave_config)); + slave_config.direction = info->direction; + slave_config.src_addr = info->fifo; + slave_config.src_addr_width = info->width; + slave_config.src_maxburst = 1; + dmaengine_slave_config(chan, &slave_config); + } else if (info->direction == DMA_TO_DEVICE) { + memset(&slave_config, 0, sizeof(struct dma_slave_config)); + slave_config.direction = info->direction; + slave_config.dst_addr = info->fifo; + slave_config.dst_addr_width = info->width; + slave_config.dst_maxburst = 1; + dmaengine_slave_config(chan, &slave_config); + } + + return (unsigned)chan; +} + +static int samsung_dmadev_release(unsigned ch, + struct s3c2410_dma_client *client) +{ + dma_release_channel((struct dma_chan *)ch); + + return 0; +} + +static int samsung_dmadev_prepare(unsigned ch, + struct samsung_dma_prep_info *info) +{ + struct scatterlist sg; + struct dma_chan *chan = (struct dma_chan *)ch; + struct dma_async_tx_descriptor *desc; + + switch (info->cap) { + case DMA_SLAVE: + sg_init_table(&sg, 1); + sg_dma_len(&sg) = info->len; + sg_set_page(&sg, pfn_to_page(PFN_DOWN(info->buf)), + info->len, offset_in_page(info->buf)); + sg_dma_address(&sg) = info->buf; + + desc = chan->device->device_prep_slave_sg(chan, + &sg, 1, info->direction, DMA_PREP_INTERRUPT); + break; + case DMA_CYCLIC: + desc = chan->device->device_prep_dma_cyclic(chan, + info->buf, info->len, info->period, info->direction); + break; + default: + dev_err(&chan->dev->device, "unsupported format\n"); + return -EFAULT; + } + + if (!desc) { + dev_err(&chan->dev->device, "cannot prepare cyclic dma\n"); + return -EFAULT; + } + + desc->callback = info->fp; + desc->callback_param = info->fp_param; + + dmaengine_submit((struct dma_async_tx_descriptor *)desc); + + return 0; +} + +static inline int samsung_dmadev_trigger(unsigned ch) +{ + dma_async_issue_pending((struct dma_chan *)ch); + + return 0; +} + +static inline int samsung_dmadev_flush(unsigned ch) +{ + return dmaengine_terminate_all((struct dma_chan *)ch); +} + +struct samsung_dma_ops dmadev_ops = { + .request = samsung_dmadev_request, + .release = samsung_dmadev_release, + .prepare = samsung_dmadev_prepare, + .trigger = samsung_dmadev_trigger, + .started = NULL, + .flush = samsung_dmadev_flush, + .stop = samsung_dmadev_flush, +}; + +void *samsung_dmadev_get_ops(void) +{ + return &dmadev_ops; +} +EXPORT_SYMBOL(samsung_dmadev_get_ops); diff --git a/arch/arm/plat-samsung/gpio-config.c b/arch/arm/plat-samsung/gpio-config.c deleted file mode 100644 index 1c0b040..0000000 --- a/arch/arm/plat-samsung/gpio-config.c +++ /dev/null @@ -1,431 +0,0 @@ -/* linux/arch/arm/plat-s3c/gpio-config.c - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008-2010 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * S3C series GPIO configuration core - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/gpio.h> -#include <linux/io.h> - -#include <plat/gpio-core.h> -#include <plat/gpio-cfg.h> -#include <plat/gpio-cfg-helpers.h> - -int s3c_gpio_cfgpin(unsigned int pin, unsigned int config) -{ - struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin); - unsigned long flags; - int offset; - int ret; - - if (!chip) - return -EINVAL; - - offset = pin - chip->chip.base; - - s3c_gpio_lock(chip, flags); - ret = s3c_gpio_do_setcfg(chip, offset, config); - s3c_gpio_unlock(chip, flags); - - return ret; -} -EXPORT_SYMBOL(s3c_gpio_cfgpin); - -int s3c_gpio_cfgpin_range(unsigned int start, unsigned int nr, - unsigned int cfg) -{ - int ret; - - for (; nr > 0; nr--, start++) { - ret = s3c_gpio_cfgpin(start, cfg); - if (ret != 0) - return ret; - } - - return 0; -} -EXPORT_SYMBOL_GPL(s3c_gpio_cfgpin_range); - -int s3c_gpio_cfgall_range(unsigned int start, unsigned int nr, - unsigned int cfg, s3c_gpio_pull_t pull) -{ - int ret; - - for (; nr > 0; nr--, start++) { - s3c_gpio_setpull(start, pull); - ret = s3c_gpio_cfgpin(start, cfg); - if (ret != 0) - return ret; - } - - return 0; -} -EXPORT_SYMBOL_GPL(s3c_gpio_cfgall_range); - -unsigned s3c_gpio_getcfg(unsigned int pin) -{ - struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin); - unsigned long flags; - unsigned ret = 0; - int offset; - - if (chip) { - offset = pin - chip->chip.base; - - s3c_gpio_lock(chip, flags); - ret = s3c_gpio_do_getcfg(chip, offset); - s3c_gpio_unlock(chip, flags); - } - - return ret; -} -EXPORT_SYMBOL(s3c_gpio_getcfg); - - -int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull) -{ - struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin); - unsigned long flags; - int offset, ret; - - if (!chip) - return -EINVAL; - - offset = pin - chip->chip.base; - - s3c_gpio_lock(chip, flags); - ret = s3c_gpio_do_setpull(chip, offset, pull); - s3c_gpio_unlock(chip, flags); - - return ret; -} -EXPORT_SYMBOL(s3c_gpio_setpull); - -s3c_gpio_pull_t s3c_gpio_getpull(unsigned int pin) -{ - struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin); - unsigned long flags; - int offset; - u32 pup = 0; - - if (chip) { - offset = pin - chip->chip.base; - - s3c_gpio_lock(chip, flags); - pup = s3c_gpio_do_getpull(chip, offset); - s3c_gpio_unlock(chip, flags); - } - - return (__force s3c_gpio_pull_t)pup; -} -EXPORT_SYMBOL(s3c_gpio_getpull); - -#ifdef CONFIG_S3C_GPIO_CFG_S3C24XX -int s3c_gpio_setcfg_s3c24xx_a(struct s3c_gpio_chip *chip, - unsigned int off, unsigned int cfg) -{ - void __iomem *reg = chip->base; - unsigned int shift = off; - u32 con; - - if (s3c_gpio_is_cfg_special(cfg)) { - cfg &= 0xf; - - /* Map output to 0, and SFN2 to 1 */ - cfg -= 1; - if (cfg > 1) - return -EINVAL; - - cfg <<= shift; - } - - con = __raw_readl(reg); - con &= ~(0x1 << shift); - con |= cfg; - __raw_writel(con, reg); - - return 0; -} - -unsigned s3c_gpio_getcfg_s3c24xx_a(struct s3c_gpio_chip *chip, - unsigned int off) -{ - u32 con; - - con = __raw_readl(chip->base); - con >>= off; - con &= 1; - con++; - - return S3C_GPIO_SFN(con); -} - -int s3c_gpio_setcfg_s3c24xx(struct s3c_gpio_chip *chip, - unsigned int off, unsigned int cfg) -{ - void __iomem *reg = chip->base; - unsigned int shift = off * 2; - u32 con; - - if (s3c_gpio_is_cfg_special(cfg)) { - cfg &= 0xf; - if (cfg > 3) - return -EINVAL; - - cfg <<= shift; - } - - con = __raw_readl(reg); - con &= ~(0x3 << shift); - con |= cfg; - __raw_writel(con, reg); - - return 0; -} - -unsigned int s3c_gpio_getcfg_s3c24xx(struct s3c_gpio_chip *chip, - unsigned int off) -{ - u32 con; - - con = __raw_readl(chip->base); - con >>= off * 2; - con &= 3; - - /* this conversion works for IN and OUT as well as special mode */ - return S3C_GPIO_SPECIAL(con); -} -#endif - -#ifdef CONFIG_S3C_GPIO_CFG_S3C64XX -int s3c_gpio_setcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip, - unsigned int off, unsigned int cfg) -{ - void __iomem *reg = chip->base; - unsigned int shift = (off & 7) * 4; - u32 con; - - if (off < 8 && chip->chip.ngpio > 8) - reg -= 4; - - if (s3c_gpio_is_cfg_special(cfg)) { - cfg &= 0xf; - cfg <<= shift; - } - - con = __raw_readl(reg); - con &= ~(0xf << shift); - con |= cfg; - __raw_writel(con, reg); - - return 0; -} - -unsigned s3c_gpio_getcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip, - unsigned int off) -{ - void __iomem *reg = chip->base; - unsigned int shift = (off & 7) * 4; - u32 con; - - if (off < 8 && chip->chip.ngpio > 8) - reg -= 4; - - con = __raw_readl(reg); - con >>= shift; - con &= 0xf; - - /* this conversion works for IN and OUT as well as special mode */ - return S3C_GPIO_SPECIAL(con); -} - -#endif /* CONFIG_S3C_GPIO_CFG_S3C64XX */ - -#ifdef CONFIG_S3C_GPIO_PULL_UPDOWN -int s3c_gpio_setpull_updown(struct s3c_gpio_chip *chip, - unsigned int off, s3c_gpio_pull_t pull) -{ - void __iomem *reg = chip->base + 0x08; - int shift = off * 2; - u32 pup; - - pup = __raw_readl(reg); - pup &= ~(3 << shift); - pup |= pull << shift; - __raw_writel(pup, reg); - - return 0; -} - -s3c_gpio_pull_t s3c_gpio_getpull_updown(struct s3c_gpio_chip *chip, - unsigned int off) -{ - void __iomem *reg = chip->base + 0x08; - int shift = off * 2; - u32 pup = __raw_readl(reg); - - pup >>= shift; - pup &= 0x3; - return (__force s3c_gpio_pull_t)pup; -} - -#ifdef CONFIG_S3C_GPIO_PULL_S3C2443 -int s3c_gpio_setpull_s3c2443(struct s3c_gpio_chip *chip, - unsigned int off, s3c_gpio_pull_t pull) -{ - switch (pull) { - case S3C_GPIO_PULL_NONE: - pull = 0x01; - break; - case S3C_GPIO_PULL_UP: - pull = 0x00; - break; - case S3C_GPIO_PULL_DOWN: - pull = 0x02; - break; - } - return s3c_gpio_setpull_updown(chip, off, pull); -} - -s3c_gpio_pull_t s3c_gpio_getpull_s3c2443(struct s3c_gpio_chip *chip, - unsigned int off) -{ - s3c_gpio_pull_t pull; - - pull = s3c_gpio_getpull_updown(chip, off); - - switch (pull) { - case 0x00: - pull = S3C_GPIO_PULL_UP; - break; - case 0x01: - case 0x03: - pull = S3C_GPIO_PULL_NONE; - break; - case 0x02: - pull = S3C_GPIO_PULL_DOWN; - break; - } - - return pull; -} -#endif -#endif - -#if defined(CONFIG_S3C_GPIO_PULL_UP) || defined(CONFIG_S3C_GPIO_PULL_DOWN) -static int s3c_gpio_setpull_1(struct s3c_gpio_chip *chip, - unsigned int off, s3c_gpio_pull_t pull, - s3c_gpio_pull_t updown) -{ - void __iomem *reg = chip->base + 0x08; - u32 pup = __raw_readl(reg); - - if (pull == updown) - pup &= ~(1 << off); - else if (pull == S3C_GPIO_PULL_NONE) - pup |= (1 << off); - else - return -EINVAL; - - __raw_writel(pup, reg); - return 0; -} - -static s3c_gpio_pull_t s3c_gpio_getpull_1(struct s3c_gpio_chip *chip, - unsigned int off, s3c_gpio_pull_t updown) -{ - void __iomem *reg = chip->base + 0x08; - u32 pup = __raw_readl(reg); - - pup &= (1 << off); - return pup ? S3C_GPIO_PULL_NONE : updown; -} -#endif /* CONFIG_S3C_GPIO_PULL_UP || CONFIG_S3C_GPIO_PULL_DOWN */ - -#ifdef CONFIG_S3C_GPIO_PULL_UP -s3c_gpio_pull_t s3c_gpio_getpull_1up(struct s3c_gpio_chip *chip, - unsigned int off) -{ - return s3c_gpio_getpull_1(chip, off, S3C_GPIO_PULL_UP); -} - -int s3c_gpio_setpull_1up(struct s3c_gpio_chip *chip, - unsigned int off, s3c_gpio_pull_t pull) -{ - return s3c_gpio_setpull_1(chip, off, pull, S3C_GPIO_PULL_UP); -} -#endif /* CONFIG_S3C_GPIO_PULL_UP */ - -#ifdef CONFIG_S3C_GPIO_PULL_DOWN -s3c_gpio_pull_t s3c_gpio_getpull_1down(struct s3c_gpio_chip *chip, - unsigned int off) -{ - return s3c_gpio_getpull_1(chip, off, S3C_GPIO_PULL_DOWN); -} - -int s3c_gpio_setpull_1down(struct s3c_gpio_chip *chip, - unsigned int off, s3c_gpio_pull_t pull) -{ - return s3c_gpio_setpull_1(chip, off, pull, S3C_GPIO_PULL_DOWN); -} -#endif /* CONFIG_S3C_GPIO_PULL_DOWN */ - -#ifdef CONFIG_S5P_GPIO_DRVSTR -s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin) -{ - struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin); - unsigned int off; - void __iomem *reg; - int shift; - u32 drvstr; - - if (!chip) - return -EINVAL; - - off = pin - chip->chip.base; - shift = off * 2; - reg = chip->base + 0x0C; - - drvstr = __raw_readl(reg); - drvstr = drvstr >> shift; - drvstr &= 0x3; - - return (__force s5p_gpio_drvstr_t)drvstr; -} -EXPORT_SYMBOL(s5p_gpio_get_drvstr); - -int s5p_gpio_set_drvstr(unsigned int pin, s5p_gpio_drvstr_t drvstr) -{ - struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin); - unsigned int off; - void __iomem *reg; - int shift; - u32 tmp; - - if (!chip) - return -EINVAL; - - off = pin - chip->chip.base; - shift = off * 2; - reg = chip->base + 0x0C; - - tmp = __raw_readl(reg); - tmp &= ~(0x3 << shift); - tmp |= drvstr << shift; - - __raw_writel(tmp, reg); - - return 0; -} -EXPORT_SYMBOL(s5p_gpio_set_drvstr); -#endif /* CONFIG_S5P_GPIO_DRVSTR */ diff --git a/arch/arm/plat-samsung/gpio.c b/arch/arm/plat-samsung/gpio.c deleted file mode 100644 index 7743c4b..0000000 --- a/arch/arm/plat-samsung/gpio.c +++ /dev/null @@ -1,167 +0,0 @@ -/* linux/arch/arm/plat-s3c/gpio.c - * - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * S3C series GPIO core - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/init.h> -#include <linux/io.h> -#include <linux/gpio.h> -#include <linux/spinlock.h> - -#include <plat/gpio-core.h> - -#ifdef CONFIG_S3C_GPIO_TRACK -struct s3c_gpio_chip *s3c_gpios[S3C_GPIO_END]; - -static __init void s3c_gpiolib_track(struct s3c_gpio_chip *chip) -{ - unsigned int gpn; - int i; - - gpn = chip->chip.base; - for (i = 0; i < chip->chip.ngpio; i++, gpn++) { - BUG_ON(gpn >= ARRAY_SIZE(s3c_gpios)); - s3c_gpios[gpn] = chip; - } -} -#endif /* CONFIG_S3C_GPIO_TRACK */ - -/* Default routines for controlling GPIO, based on the original S3C24XX - * GPIO functions which deal with the case where each gpio bank of the - * chip is as following: - * - * base + 0x00: Control register, 2 bits per gpio - * gpio n: 2 bits starting at (2*n) - * 00 = input, 01 = output, others mean special-function - * base + 0x04: Data register, 1 bit per gpio - * bit n: data bit n -*/ - -static int s3c_gpiolib_input(struct gpio_chip *chip, unsigned offset) -{ - struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); - void __iomem *base = ourchip->base; - unsigned long flags; - unsigned long con; - - s3c_gpio_lock(ourchip, flags); - - con = __raw_readl(base + 0x00); - con &= ~(3 << (offset * 2)); - - __raw_writel(con, base + 0x00); - - s3c_gpio_unlock(ourchip, flags); - return 0; -} - -static int s3c_gpiolib_output(struct gpio_chip *chip, - unsigned offset, int value) -{ - struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); - void __iomem *base = ourchip->base; - unsigned long flags; - unsigned long dat; - unsigned long con; - - s3c_gpio_lock(ourchip, flags); - - dat = __raw_readl(base + 0x04); - dat &= ~(1 << offset); - if (value) - dat |= 1 << offset; - __raw_writel(dat, base + 0x04); - - con = __raw_readl(base + 0x00); - con &= ~(3 << (offset * 2)); - con |= 1 << (offset * 2); - - __raw_writel(con, base + 0x00); - __raw_writel(dat, base + 0x04); - - s3c_gpio_unlock(ourchip, flags); - return 0; -} - -static void s3c_gpiolib_set(struct gpio_chip *chip, - unsigned offset, int value) -{ - struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); - void __iomem *base = ourchip->base; - unsigned long flags; - unsigned long dat; - - s3c_gpio_lock(ourchip, flags); - - dat = __raw_readl(base + 0x04); - dat &= ~(1 << offset); - if (value) - dat |= 1 << offset; - __raw_writel(dat, base + 0x04); - - s3c_gpio_unlock(ourchip, flags); -} - -static int s3c_gpiolib_get(struct gpio_chip *chip, unsigned offset) -{ - struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); - unsigned long val; - - val = __raw_readl(ourchip->base + 0x04); - val >>= offset; - val &= 1; - - return val; -} - -__init void s3c_gpiolib_add(struct s3c_gpio_chip *chip) -{ - struct gpio_chip *gc = &chip->chip; - int ret; - - BUG_ON(!chip->base); - BUG_ON(!gc->label); - BUG_ON(!gc->ngpio); - - spin_lock_init(&chip->lock); - - if (!gc->direction_input) - gc->direction_input = s3c_gpiolib_input; - if (!gc->direction_output) - gc->direction_output = s3c_gpiolib_output; - if (!gc->set) - gc->set = s3c_gpiolib_set; - if (!gc->get) - gc->get = s3c_gpiolib_get; - -#ifdef CONFIG_PM - if (chip->pm != NULL) { - if (!chip->pm->save || !chip->pm->resume) - printk(KERN_ERR "gpio: %s has missing PM functions\n", - gc->label); - } else - printk(KERN_ERR "gpio: %s has no PM function\n", gc->label); -#endif - - /* gpiochip_add() prints own failure message on error. */ - ret = gpiochip_add(gc); - if (ret >= 0) - s3c_gpiolib_track(chip); -} - -int samsung_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset) -{ - struct s3c_gpio_chip *s3c_chip = container_of(chip, - struct s3c_gpio_chip, chip); - - return s3c_chip->irq_base + offset; -} diff --git a/arch/arm/plat-s3c24xx/include/plat/audio-simtec.h b/arch/arm/plat-samsung/include/plat/audio-simtec.h index de5e88f..5345364 100644 --- a/arch/arm/plat-s3c24xx/include/plat/audio-simtec.h +++ b/arch/arm/plat-samsung/include/plat/audio-simtec.h @@ -1,4 +1,4 @@ -/* arch/arm/plat-s3c24xx/include/plat/audio-simtec.h +/* arch/arm/plat-samsung/include/plat/audio-simtec.h * * Copyright 2008 Simtec Electronics * http://armlinux.simtec.co.uk/ diff --git a/arch/arm/plat-s5p/include/plat/camport.h b/arch/arm/plat-samsung/include/plat/camport.h index 71688c8..a5708bf 100644 --- a/arch/arm/plat-s5p/include/plat/camport.h +++ b/arch/arm/plat-samsung/include/plat/camport.h @@ -8,8 +8,8 @@ * published by the Free Software Foundation. */ -#ifndef PLAT_S5P_CAMPORT_H_ -#define PLAT_S5P_CAMPORT_H_ __FILE__ +#ifndef __PLAT_SAMSUNG_CAMPORT_H_ +#define __PLAT_SAMSUNG_CAMPORT_H_ __FILE__ enum s5p_camport_id { S5P_CAMPORT_A, @@ -25,4 +25,4 @@ enum s5p_camport_id { int s5pv210_fimc_setup_gpio(enum s5p_camport_id id); int exynos4_fimc_setup_gpio(enum s5p_camport_id id); -#endif +#endif /* __PLAT_SAMSUNG_CAMPORT_H */ diff --git a/arch/arm/plat-s3c24xx/include/plat/common-smdk.h b/arch/arm/plat-samsung/include/plat/common-smdk.h index 58d9094..ba028f1 100644 --- a/arch/arm/plat-s3c24xx/include/plat/common-smdk.h +++ b/arch/arm/plat-samsung/include/plat/common-smdk.h @@ -1,4 +1,4 @@ -/* linux/include/asm-arm/plat-s3c24xx/common-smdk.h +/* linux/arch/arm/plat-samsung/include/plat/common-smdk.h * * Copyright (c) 2006 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> diff --git a/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h b/arch/arm/plat-samsung/include/plat/cpu-freq-core.h index d623235..dac4760 100644 --- a/arch/arm/plat-s3c24xx/include/plat/cpu-freq-core.h +++ b/arch/arm/plat-samsung/include/plat/cpu-freq-core.h @@ -1,4 +1,4 @@ -/* arch/arm/plat-s3c/include/plat/cpu-freq.h +/* arch/arm/plat-samsung/include/plat/cpu-freq-core.h * * Copyright (c) 2006-2009 Simtec Electronics * http://armlinux.simtec.co.uk/ @@ -195,7 +195,8 @@ struct s3c_cpufreq_info { extern int s3c_cpufreq_register(struct s3c_cpufreq_info *info); -extern int s3c_plltab_register(struct cpufreq_frequency_table *plls, unsigned int plls_no); +extern int s3c_plltab_register(struct cpufreq_frequency_table *plls, + unsigned int plls_no); /* exports and utilities for debugfs */ extern struct s3c_cpufreq_config *s3c_cpufreq_getconfig(void); diff --git a/arch/arm/plat-samsung/include/plat/devs.h b/arch/arm/plat-samsung/include/plat/devs.h index 24ebb1e..ee5014a 100644 --- a/arch/arm/plat-samsung/include/plat/devs.h +++ b/arch/arm/plat-samsung/include/plat/devs.h @@ -62,6 +62,7 @@ extern struct platform_device s3c_device_i2c4; extern struct platform_device s3c_device_i2c5; extern struct platform_device s3c_device_i2c6; extern struct platform_device s3c_device_i2c7; +extern struct platform_device s5p_device_i2c_hdmiphy; extern struct platform_device s3c_device_rtc; extern struct platform_device s3c_device_adc; extern struct platform_device s3c_device_sdi; @@ -142,6 +143,11 @@ extern struct platform_device s5p_device_fimc3; extern struct platform_device s5p_device_mfc; extern struct platform_device s5p_device_mfc_l; extern struct platform_device s5p_device_mfc_r; + +extern struct platform_device s5p_device_hdmi; +extern struct platform_device s5p_device_mixer; +extern struct platform_device s5p_device_sdo; + extern struct platform_device s5p_device_mipi_csis0; extern struct platform_device s5p_device_mipi_csis1; diff --git a/arch/arm/plat-samsung/include/plat/dma-ops.h b/arch/arm/plat-samsung/include/plat/dma-ops.h new file mode 100644 index 0000000..4c1a363 --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/dma-ops.h @@ -0,0 +1,63 @@ +/* arch/arm/plat-samsung/include/plat/dma-ops.h + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Samsung DMA support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __SAMSUNG_DMA_OPS_H_ +#define __SAMSUNG_DMA_OPS_H_ __FILE__ + +#include <linux/dmaengine.h> + +struct samsung_dma_prep_info { + enum dma_transaction_type cap; + enum dma_data_direction direction; + dma_addr_t buf; + unsigned long period; + unsigned long len; + void (*fp)(void *data); + void *fp_param; +}; + +struct samsung_dma_info { + enum dma_transaction_type cap; + enum dma_data_direction direction; + enum dma_slave_buswidth width; + dma_addr_t fifo; + struct s3c2410_dma_client *client; +}; + +struct samsung_dma_ops { + unsigned (*request)(enum dma_ch ch, struct samsung_dma_info *info); + int (*release)(unsigned ch, struct s3c2410_dma_client *client); + int (*prepare)(unsigned ch, struct samsung_dma_prep_info *info); + int (*trigger)(unsigned ch); + int (*started)(unsigned ch); + int (*flush)(unsigned ch); + int (*stop)(unsigned ch); +}; + +extern void *samsung_dmadev_get_ops(void); +extern void *s3c_dma_get_ops(void); + +static inline void *__samsung_dma_get_ops(void) +{ + if (samsung_dma_is_dmadev()) + return samsung_dmadev_get_ops(); + else + return s3c_dma_get_ops(); +} + +/* + * samsung_dma_get_ops + * get the set of samsung dma operations + */ +#define samsung_dma_get_ops() __samsung_dma_get_ops() + +#endif /* __SAMSUNG_DMA_OPS_H_ */ diff --git a/arch/arm/plat-samsung/include/plat/s3c-dma-pl330.h b/arch/arm/plat-samsung/include/plat/dma-pl330.h index 8107442..2e55e59 100644 --- a/arch/arm/plat-samsung/include/plat/s3c-dma-pl330.h +++ b/arch/arm/plat-samsung/include/plat/dma-pl330.h @@ -8,11 +8,8 @@ * (at your option) any later version. */ -#ifndef __S3C_DMA_PL330_H_ -#define __S3C_DMA_PL330_H_ - -#define S3C2410_DMAF_AUTOSTART (1 << 0) -#define S3C2410_DMAF_CIRCULAR (1 << 1) +#ifndef __DMA_PL330_H_ +#define __DMA_PL330_H_ __FILE__ /* * PL330 can assign any channel to communicate with @@ -20,7 +17,7 @@ * For the sake of consistency across client drivers, * We keep the channel names unchanged and only add * missing peripherals are added. - * Order is not important since S3C PL330 API driver + * Order is not important since DMA PL330 API driver * use these just as IDs. */ enum dma_ch { @@ -88,11 +85,20 @@ enum dma_ch { DMACH_MAX, }; -static inline bool s3c_dma_has_circular(void) +struct s3c2410_dma_client { + char *name; +}; + +static inline bool samsung_dma_has_circular(void) +{ + return true; +} + +static inline bool samsung_dma_is_dmadev(void) { return true; } -#include <plat/dma.h> +#include <plat/dma-ops.h> -#endif /* __S3C_DMA_PL330_H_ */ +#endif /* __DMA_PL330_H_ */ diff --git a/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h b/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h index 336d5ac..1c1ed54 100644 --- a/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h +++ b/arch/arm/plat-samsung/include/plat/dma-s3c24xx.h @@ -18,11 +18,6 @@ extern struct s3c2410_dma_chan s3c2410_chans[S3C_DMA_CHANNELS]; #define DMA_CH_VALID (1<<31) #define DMA_CH_NEVER (1<<30) -struct s3c24xx_dma_addr { - unsigned long from; - unsigned long to; -}; - /* struct s3c24xx_dma_map * * this holds the mapping information for the channel selected @@ -31,7 +26,6 @@ struct s3c24xx_dma_addr { struct s3c24xx_dma_map { const char *name; - struct s3c24xx_dma_addr hw_addr; unsigned long channels[S3C_DMA_CHANNELS]; unsigned long channels_rx[S3C_DMA_CHANNELS]; @@ -47,7 +41,7 @@ struct s3c24xx_dma_selection { void (*direction)(struct s3c2410_dma_chan *chan, struct s3c24xx_dma_map *map, - enum s3c2410_dmasrc dir); + enum dma_data_direction dir); }; extern int s3c24xx_dma_init_map(struct s3c24xx_dma_selection *sel); diff --git a/arch/arm/plat-samsung/include/plat/dma.h b/arch/arm/plat-samsung/include/plat/dma.h index 8c273b7..b906112 100644 --- a/arch/arm/plat-samsung/include/plat/dma.h +++ b/arch/arm/plat-samsung/include/plat/dma.h @@ -10,17 +10,14 @@ * published by the Free Software Foundation. */ +#include <linux/dma-mapping.h> + enum s3c2410_dma_buffresult { S3C2410_RES_OK, S3C2410_RES_ERR, S3C2410_RES_ABORT }; -enum s3c2410_dmasrc { - S3C2410_DMASRC_HW, /* source is memory */ - S3C2410_DMASRC_MEM /* source is hardware */ -}; - /* enum s3c2410_chan_op * * operation codes passed to the DMA code by the user, and also used @@ -112,7 +109,7 @@ extern int s3c2410_dma_config(enum dma_ch channel, int xferunit); */ extern int s3c2410_dma_devconfig(enum dma_ch channel, - enum s3c2410_dmasrc source, unsigned long devaddr); + enum dma_data_direction source, unsigned long devaddr); /* s3c2410_dma_getposition * @@ -126,3 +123,4 @@ extern int s3c2410_dma_set_opfn(enum dma_ch, s3c2410_dma_opfn_t rtn); extern int s3c2410_dma_set_buffdone_fn(enum dma_ch, s3c2410_dma_cbfn_t rtn); +#include <plat/dma-ops.h> diff --git a/arch/arm/plat-s5p/include/plat/ehci.h b/arch/arm/plat-samsung/include/plat/ehci.h index 6ae6810..5f28cae 100644 --- a/arch/arm/plat-s5p/include/plat/ehci.h +++ b/arch/arm/plat-samsung/include/plat/ehci.h @@ -8,8 +8,8 @@ * option) any later version. */ -#ifndef __PLAT_S5P_EHCI_H -#define __PLAT_S5P_EHCI_H +#ifndef __PLAT_SAMSUNG_EHCI_H +#define __PLAT_SAMSUNG_EHCI_H __FILE__ struct s5p_ehci_platdata { int (*phy_init)(struct platform_device *pdev, int type); @@ -18,4 +18,4 @@ struct s5p_ehci_platdata { extern void s5p_ehci_set_platdata(struct s5p_ehci_platdata *pd); -#endif /* __PLAT_S5P_EHCI_H */ +#endif /* __PLAT_SAMSUNG_EHCI_H */ diff --git a/arch/arm/plat-s5p/include/plat/exynos4.h b/arch/arm/plat-samsung/include/plat/exynos4.h index f680a14..20d73bf 100644 --- a/arch/arm/plat-s5p/include/plat/exynos4.h +++ b/arch/arm/plat-samsung/include/plat/exynos4.h @@ -1,4 +1,4 @@ -/* linux/arch/arm/plat-s5p/include/plat/exynos4.h +/* linux/arch/arm/plat-samsung/include/plat/exynos4.h * * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. * http://www.samsung.com diff --git a/arch/arm/plat-samsung/include/plat/fb.h b/arch/arm/plat-samsung/include/plat/fb.h index 01f10e4..0fedf47 100644 --- a/arch/arm/plat-samsung/include/plat/fb.h +++ b/arch/arm/plat-samsung/include/plat/fb.h @@ -109,4 +109,11 @@ extern void s5pv210_fb_gpio_setup_24bpp(void); */ extern void exynos4_fimd0_gpio_setup_24bpp(void); +/** + * s5p64x0_fb_gpio_setup_24bpp() - S5P6440/S5P6450 setup function for 24bpp LCD + * + * Initialise the GPIO for an 24bpp LCD display on the RGB interface. + */ +extern void s5p64x0_fb_gpio_setup_24bpp(void); + #endif /* __PLAT_S3C_FB_H */ diff --git a/arch/arm/plat-s3c24xx/include/plat/fiq.h b/arch/arm/plat-samsung/include/plat/fiq.h index 8521b83..535d06a 100644 --- a/arch/arm/plat-s3c24xx/include/plat/fiq.h +++ b/arch/arm/plat-samsung/include/plat/fiq.h @@ -1,4 +1,4 @@ -/* linux/include/asm-arm/plat-s3c24xx/fiq.h +/* linux/arch/arm/plat-samsung/include/plat/fiq.h * * Copyright (c) 2009 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h b/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h index 9a4e53d..a181d7c 100644 --- a/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h +++ b/arch/arm/plat-samsung/include/plat/gpio-cfg-helpers.h @@ -1,11 +1,11 @@ -/* linux/arch/arm/plat-s3c/include/plat/gpio-cfg-helper.h +/* linux/arch/arm/plat-samsung/include/plat/gpio-cfg-helper.h * * Copyright 2008 Openmoko, Inc. * Copyright 2008 Simtec Electronics * http://armlinux.simtec.co.uk/ * Ben Dooks <ben@simtec.co.uk> * - * S3C Platform - GPIO pin configuration helper definitions + * Samsung Platform - GPIO pin configuration helper definitions * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -24,120 +24,30 @@ * by disabling interrupts. */ -static inline int s3c_gpio_do_setcfg(struct s3c_gpio_chip *chip, - unsigned int off, unsigned int config) +static inline int samsung_gpio_do_setcfg(struct samsung_gpio_chip *chip, + unsigned int off, unsigned int config) { return (chip->config->set_config)(chip, off, config); } -static inline unsigned s3c_gpio_do_getcfg(struct s3c_gpio_chip *chip, - unsigned int off) +static inline unsigned samsung_gpio_do_getcfg(struct samsung_gpio_chip *chip, + unsigned int off) { return (chip->config->get_config)(chip, off); } -static inline int s3c_gpio_do_setpull(struct s3c_gpio_chip *chip, - unsigned int off, s3c_gpio_pull_t pull) +static inline int samsung_gpio_do_setpull(struct samsung_gpio_chip *chip, + unsigned int off, samsung_gpio_pull_t pull) { return (chip->config->set_pull)(chip, off, pull); } -static inline s3c_gpio_pull_t s3c_gpio_do_getpull(struct s3c_gpio_chip *chip, - unsigned int off) +static inline samsung_gpio_pull_t samsung_gpio_do_getpull(struct samsung_gpio_chip *chip, + unsigned int off) { return chip->config->get_pull(chip, off); } -/** - * s3c_gpio_setcfg_s3c24xx - S3C24XX style GPIO configuration. - * @chip: The gpio chip that is being configured. - * @off: The offset for the GPIO being configured. - * @cfg: The configuration value to set. - * - * This helper deal with the GPIO cases where the control register - * has two bits of configuration per gpio, which have the following - * functions: - * 00 = input - * 01 = output - * 1x = special function -*/ -extern int s3c_gpio_setcfg_s3c24xx(struct s3c_gpio_chip *chip, - unsigned int off, unsigned int cfg); - -/** - * s3c_gpio_getcfg_s3c24xx - S3C24XX style GPIO configuration read. - * @chip: The gpio chip that is being configured. - * @off: The offset for the GPIO being configured. - * - * The reverse of s3c_gpio_setcfg_s3c24xx(). Will return a value whicg - * could be directly passed back to s3c_gpio_setcfg_s3c24xx(), from the - * S3C_GPIO_SPECIAL() macro. - */ -unsigned int s3c_gpio_getcfg_s3c24xx(struct s3c_gpio_chip *chip, - unsigned int off); - -/** - * s3c_gpio_setcfg_s3c24xx_a - S3C24XX style GPIO configuration (Bank A) - * @chip: The gpio chip that is being configured. - * @off: The offset for the GPIO being configured. - * @cfg: The configuration value to set. - * - * This helper deal with the GPIO cases where the control register - * has one bit of configuration for the gpio, where setting the bit - * means the pin is in special function mode and unset means output. -*/ -extern int s3c_gpio_setcfg_s3c24xx_a(struct s3c_gpio_chip *chip, - unsigned int off, unsigned int cfg); - - -/** - * s3c_gpio_getcfg_s3c24xx_a - S3C24XX style GPIO configuration read (Bank A) - * @chip: The gpio chip that is being configured. - * @off: The offset for the GPIO being configured. - * - * The reverse of s3c_gpio_setcfg_s3c24xx_a() turning an GPIO into a usable - * GPIO configuration value. - * - * @sa s3c_gpio_getcfg_s3c24xx - * @sa s3c_gpio_getcfg_s3c64xx_4bit - */ -extern unsigned s3c_gpio_getcfg_s3c24xx_a(struct s3c_gpio_chip *chip, - unsigned int off); - -/** - * s3c_gpio_setcfg_s3c64xx_4bit - S3C64XX 4bit single register GPIO config. - * @chip: The gpio chip that is being configured. - * @off: The offset for the GPIO being configured. - * @cfg: The configuration value to set. - * - * This helper deal with the GPIO cases where the control register has 4 bits - * of control per GPIO, generally in the form of: - * 0000 = Input - * 0001 = Output - * others = Special functions (dependent on bank) - * - * Note, since the code to deal with the case where there are two control - * registers instead of one, we do not have a separate set of functions for - * each case. -*/ -extern int s3c_gpio_setcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip, - unsigned int off, unsigned int cfg); - - -/** - * s3c_gpio_getcfg_s3c64xx_4bit - S3C64XX 4bit single register GPIO config read. - * @chip: The gpio chip that is being configured. - * @off: The offset for the GPIO being configured. - * - * The reverse of s3c_gpio_setcfg_s3c64xx_4bit(), turning a gpio configuration - * register setting into a value the software can use, such as could be passed - * to s3c_gpio_setcfg_s3c64xx_4bit(). - * - * @sa s3c_gpio_getcfg_s3c24xx - */ -extern unsigned s3c_gpio_getcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip, - unsigned int off); - /* Pull-{up,down} resistor controls. * * S3C2410,S3C2440 = Pull-UP, @@ -147,7 +57,7 @@ extern unsigned s3c_gpio_getcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip, */ /** - * s3c_gpio_setpull_1up() - Pull configuration for choice of up or none. + * s3c24xx_gpio_setpull_1up() - Pull configuration for choice of up or none. * @chip: The gpio chip that is being configured. * @off: The offset for the GPIO being configured. * @param: pull: The pull mode being requested. @@ -155,11 +65,11 @@ extern unsigned s3c_gpio_getcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip, * This is a helper function for the case where we have GPIOs with one * bit configuring the presence of a pull-up resistor. */ -extern int s3c_gpio_setpull_1up(struct s3c_gpio_chip *chip, - unsigned int off, s3c_gpio_pull_t pull); +extern int s3c24xx_gpio_setpull_1up(struct samsung_gpio_chip *chip, + unsigned int off, samsung_gpio_pull_t pull); /** - * s3c_gpio_setpull_1down() - Pull configuration for choice of down or none + * s3c24xx_gpio_setpull_1down() - Pull configuration for choice of down or none * @chip: The gpio chip that is being configured * @off: The offset for the GPIO being configured * @param: pull: The pull mode being requested @@ -167,11 +77,13 @@ extern int s3c_gpio_setpull_1up(struct s3c_gpio_chip *chip, * This is a helper function for the case where we have GPIOs with one * bit configuring the presence of a pull-down resistor. */ -extern int s3c_gpio_setpull_1down(struct s3c_gpio_chip *chip, - unsigned int off, s3c_gpio_pull_t pull); +extern int s3c24xx_gpio_setpull_1down(struct samsung_gpio_chip *chip, + unsigned int off, samsung_gpio_pull_t pull); /** - * s3c_gpio_setpull_upown() - Pull configuration for choice of up, down or none + * samsung_gpio_setpull_upown() - Pull configuration for choice of up, + * down or none + * * @chip: The gpio chip that is being configured. * @off: The offset for the GPIO being configured. * @param: pull: The pull mode being requested. @@ -183,45 +95,46 @@ extern int s3c_gpio_setpull_1down(struct s3c_gpio_chip *chip, * 01 = Pull-up resistor connected * 10 = Pull-down resistor connected */ -extern int s3c_gpio_setpull_updown(struct s3c_gpio_chip *chip, - unsigned int off, s3c_gpio_pull_t pull); - +extern int samsung_gpio_setpull_updown(struct samsung_gpio_chip *chip, + unsigned int off, samsung_gpio_pull_t pull); /** - * s3c_gpio_getpull_updown() - Get configuration for choice of up, down or none + * samsung_gpio_getpull_updown() - Get configuration for choice of up, + * down or none + * * @chip: The gpio chip that the GPIO pin belongs to * @off: The offset to the pin to get the configuration of. * - * This helper function reads the state of the pull-{up,down} resistor for the - * given GPIO in the same case as s3c_gpio_setpull_upown. + * This helper function reads the state of the pull-{up,down} resistor + * for the given GPIO in the same case as samsung_gpio_setpull_upown. */ -extern s3c_gpio_pull_t s3c_gpio_getpull_updown(struct s3c_gpio_chip *chip, - unsigned int off); +extern samsung_gpio_pull_t samsung_gpio_getpull_updown(struct samsung_gpio_chip *chip, + unsigned int off); /** - * s3c_gpio_getpull_1up() - Get configuration for choice of up or none + * s3c24xx_gpio_getpull_1up() - Get configuration for choice of up or none * @chip: The gpio chip that the GPIO pin belongs to * @off: The offset to the pin to get the configuration of. * * This helper function reads the state of the pull-up resistor for the - * given GPIO in the same case as s3c_gpio_setpull_1up. + * given GPIO in the same case as s3c24xx_gpio_setpull_1up. */ -extern s3c_gpio_pull_t s3c_gpio_getpull_1up(struct s3c_gpio_chip *chip, - unsigned int off); +extern samsung_gpio_pull_t s3c24xx_gpio_getpull_1up(struct samsung_gpio_chip *chip, + unsigned int off); /** - * s3c_gpio_getpull_1down() - Get configuration for choice of down or none + * s3c24xx_gpio_getpull_1down() - Get configuration for choice of down or none * @chip: The gpio chip that the GPIO pin belongs to * @off: The offset to the pin to get the configuration of. * * This helper function reads the state of the pull-down resistor for the - * given GPIO in the same case as s3c_gpio_setpull_1down. + * given GPIO in the same case as s3c24xx_gpio_setpull_1down. */ -extern s3c_gpio_pull_t s3c_gpio_getpull_1down(struct s3c_gpio_chip *chip, - unsigned int off); +extern samsung_gpio_pull_t s3c24xx_gpio_getpull_1down(struct samsung_gpio_chip *chip, + unsigned int off); /** - * s3c_gpio_setpull_s3c2443() - Pull configuration for s3c2443. + * s3c2443_gpio_setpull() - Pull configuration for s3c2443. * @chip: The gpio chip that is being configured. * @off: The offset for the GPIO being configured. * @param: pull: The pull mode being requested. @@ -233,19 +146,18 @@ extern s3c_gpio_pull_t s3c_gpio_getpull_1down(struct s3c_gpio_chip *chip, * 10 = Pull-down resistor connected * x1 = No pull up resistor */ -extern int s3c_gpio_setpull_s3c2443(struct s3c_gpio_chip *chip, - unsigned int off, s3c_gpio_pull_t pull); +extern int s3c2443_gpio_setpull(struct samsung_gpio_chip *chip, + unsigned int off, samsung_gpio_pull_t pull); /** - * s3c_gpio_getpull_s3c2443() - Get configuration for s3c2443 pull resistors + * s3c2443_gpio_getpull() - Get configuration for s3c2443 pull resistors * @chip: The gpio chip that the GPIO pin belongs to. * @off: The offset to the pin to get the configuration of. * * This helper function reads the state of the pull-{up,down} resistor for the - * given GPIO in the same case as s3c_gpio_setpull_upown. + * given GPIO in the same case as samsung_gpio_setpull_upown. */ -extern s3c_gpio_pull_t s3c_gpio_getpull_s3c2443(struct s3c_gpio_chip *chip, +extern samsung_gpio_pull_t s3c2443_gpio_getpull(struct samsung_gpio_chip *chip, unsigned int off); #endif /* __PLAT_GPIO_CFG_HELPERS_H */ - diff --git a/arch/arm/plat-samsung/include/plat/gpio-cfg.h b/arch/arm/plat-samsung/include/plat/gpio-cfg.h index 1762dcb..d48245b 100644 --- a/arch/arm/plat-samsung/include/plat/gpio-cfg.h +++ b/arch/arm/plat-samsung/include/plat/gpio-cfg.h @@ -24,14 +24,14 @@ #ifndef __PLAT_GPIO_CFG_H #define __PLAT_GPIO_CFG_H __FILE__ -typedef unsigned int __bitwise__ s3c_gpio_pull_t; +typedef unsigned int __bitwise__ samsung_gpio_pull_t; typedef unsigned int __bitwise__ s5p_gpio_drvstr_t; /* forward declaration if gpio-core.h hasn't been included */ -struct s3c_gpio_chip; +struct samsung_gpio_chip; /** - * struct s3c_gpio_cfg GPIO configuration + * struct samsung_gpio_cfg GPIO configuration * @cfg_eint: Configuration setting when used for external interrupt source * @get_pull: Read the current pull configuration for the GPIO * @set_pull: Set the current pull configuraiton for the GPIO @@ -44,20 +44,20 @@ struct s3c_gpio_chip; * per-bank configuration information that other systems such as the * external interrupt code will need. * - * @sa s3c_gpio_cfgpin + * @sa samsung_gpio_cfgpin * @sa s3c_gpio_getcfg * @sa s3c_gpio_setpull * @sa s3c_gpio_getpull */ -struct s3c_gpio_cfg { +struct samsung_gpio_cfg { unsigned int cfg_eint; - s3c_gpio_pull_t (*get_pull)(struct s3c_gpio_chip *chip, unsigned offs); - int (*set_pull)(struct s3c_gpio_chip *chip, unsigned offs, - s3c_gpio_pull_t pull); + samsung_gpio_pull_t (*get_pull)(struct samsung_gpio_chip *chip, unsigned offs); + int (*set_pull)(struct samsung_gpio_chip *chip, unsigned offs, + samsung_gpio_pull_t pull); - unsigned (*get_config)(struct s3c_gpio_chip *chip, unsigned offs); - int (*set_config)(struct s3c_gpio_chip *chip, unsigned offs, + unsigned (*get_config)(struct samsung_gpio_chip *chip, unsigned offs); + int (*set_config)(struct samsung_gpio_chip *chip, unsigned offs, unsigned config); }; @@ -69,7 +69,7 @@ struct s3c_gpio_cfg { #define S3C_GPIO_OUTPUT (S3C_GPIO_SPECIAL(1)) #define S3C_GPIO_SFN(x) (S3C_GPIO_SPECIAL(x)) -#define s3c_gpio_is_cfg_special(_cfg) \ +#define samsung_gpio_is_cfg_special(_cfg) \ (((_cfg) & S3C_GPIO_SPECIAL_MARK) == S3C_GPIO_SPECIAL_MARK) /** @@ -128,9 +128,9 @@ extern int s3c_gpio_cfgpin_range(unsigned int start, unsigned int nr, * up or down settings, and it may be dependent on the chip that is being * used to whether the particular mode is available. */ -#define S3C_GPIO_PULL_NONE ((__force s3c_gpio_pull_t)0x00) -#define S3C_GPIO_PULL_DOWN ((__force s3c_gpio_pull_t)0x01) -#define S3C_GPIO_PULL_UP ((__force s3c_gpio_pull_t)0x02) +#define S3C_GPIO_PULL_NONE ((__force samsung_gpio_pull_t)0x00) +#define S3C_GPIO_PULL_DOWN ((__force samsung_gpio_pull_t)0x01) +#define S3C_GPIO_PULL_UP ((__force samsung_gpio_pull_t)0x02) /** * s3c_gpio_setpull() - set the state of a gpio pin pull resistor @@ -143,7 +143,7 @@ extern int s3c_gpio_cfgpin_range(unsigned int start, unsigned int nr, * * @pull is one of S3C_GPIO_PULL_NONE, S3C_GPIO_PULL_DOWN or S3C_GPIO_PULL_UP. */ -extern int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull); +extern int s3c_gpio_setpull(unsigned int pin, samsung_gpio_pull_t pull); /** * s3c_gpio_getpull() - get the pull resistor state of a gpio pin @@ -151,7 +151,7 @@ extern int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull); * * Read the pull resistor value for the specified pin. */ -extern s3c_gpio_pull_t s3c_gpio_getpull(unsigned int pin); +extern samsung_gpio_pull_t s3c_gpio_getpull(unsigned int pin); /* configure `all` aspects of an gpio */ @@ -170,7 +170,7 @@ extern s3c_gpio_pull_t s3c_gpio_getpull(unsigned int pin); * @sa s3c_gpio_cfgpin_range */ extern int s3c_gpio_cfgall_range(unsigned int start, unsigned int nr, - unsigned int cfg, s3c_gpio_pull_t pull); + unsigned int cfg, samsung_gpio_pull_t pull); static inline int s3c_gpio_cfgrange_nopull(unsigned int pin, unsigned int size, unsigned int cfg) diff --git a/arch/arm/plat-samsung/include/plat/gpio-core.h b/arch/arm/plat-samsung/include/plat/gpio-core.h index 8cad4cf..1fe6917 100644 --- a/arch/arm/plat-samsung/include/plat/gpio-core.h +++ b/arch/arm/plat-samsung/include/plat/gpio-core.h @@ -25,22 +25,22 @@ * specific code. */ -struct s3c_gpio_chip; +struct samsung_gpio_chip; /** - * struct s3c_gpio_pm - power management (suspend/resume) information + * struct samsung_gpio_pm - power management (suspend/resume) information * @save: Routine to save the state of the GPIO block * @resume: Routine to resume the GPIO block. */ -struct s3c_gpio_pm { - void (*save)(struct s3c_gpio_chip *chip); - void (*resume)(struct s3c_gpio_chip *chip); +struct samsung_gpio_pm { + void (*save)(struct samsung_gpio_chip *chip); + void (*resume)(struct samsung_gpio_chip *chip); }; -struct s3c_gpio_cfg; +struct samsung_gpio_cfg; /** - * struct s3c_gpio_chip - wrapper for specific implementation of gpio + * struct samsung_gpio_chip - wrapper for specific implementation of gpio * @chip: The chip structure to be exported via gpiolib. * @base: The base pointer to the gpio configuration registers. * @group: The group register number for gpio interrupt support. @@ -60,10 +60,10 @@ struct s3c_gpio_cfg; * CPU cores trying to get one lock for different GPIO banks, where each * bank of GPIO has its own register space and configuration registers. */ -struct s3c_gpio_chip { +struct samsung_gpio_chip { struct gpio_chip chip; - struct s3c_gpio_cfg *config; - struct s3c_gpio_pm *pm; + struct samsung_gpio_cfg *config; + struct samsung_gpio_pm *pm; void __iomem *base; int irq_base; int group; @@ -73,58 +73,11 @@ struct s3c_gpio_chip { #endif }; -static inline struct s3c_gpio_chip *to_s3c_gpio(struct gpio_chip *gpc) +static inline struct samsung_gpio_chip *to_samsung_gpio(struct gpio_chip *gpc) { - return container_of(gpc, struct s3c_gpio_chip, chip); + return container_of(gpc, struct samsung_gpio_chip, chip); } -/** s3c_gpiolib_add() - add the s3c specific version of a gpio_chip. - * @chip: The chip to register - * - * This is a wrapper to gpiochip_add() that takes our specific gpio chip - * information and makes the necessary alterations for the platform and - * notes the information for use with the configuration systems and any - * other parts of the system. - */ -extern void s3c_gpiolib_add(struct s3c_gpio_chip *chip); - -/* CONFIG_S3C_GPIO_TRACK enables the tracking of the s3c specific gpios - * for use with the configuration calls, and other parts of the s3c gpiolib - * support code. - * - * Not all s3c support code will need this, as some configurations of cpu - * may only support one or two different configuration options and have an - * easy gpio to s3c_gpio_chip mapping function. If this is the case, then - * the machine support file should provide its own s3c_gpiolib_getchip() - * and any other necessary functions. - */ - -/** - * samsung_gpiolib_add_4bit_chips - 4bit single register GPIO config. - * @chip: The gpio chip that is being configured. - * @nr_chips: The no of chips (gpio ports) for the GPIO being configured. - * - * This helper deal with the GPIO cases where the control register has 4 bits - * of control per GPIO, generally in the form of: - * 0000 = Input - * 0001 = Output - * others = Special functions (dependent on bank) - * - * Note, since the code to deal with the case where there are two control - * registers instead of one, we do not have a separate set of function - * (samsung_gpiolib_add_4bit2_chips)for each case. - */ -extern void samsung_gpiolib_add_4bit_chips(struct s3c_gpio_chip *chip, - int nr_chips); -extern void samsung_gpiolib_add_4bit2_chips(struct s3c_gpio_chip *chip, - int nr_chips); -extern void samsung_gpiolib_add_2bit_chips(struct s3c_gpio_chip *chip, - int nr_chips); - -extern void samsung_gpiolib_add_4bit(struct s3c_gpio_chip *chip); -extern void samsung_gpiolib_add_4bit2(struct s3c_gpio_chip *chip); - - /** * samsung_gpiolib_to_irq - convert gpio pin to irq number * @chip: The gpio chip that the pin belongs to. @@ -136,36 +89,36 @@ extern void samsung_gpiolib_add_4bit2(struct s3c_gpio_chip *chip); extern int samsung_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset); /* exported for core SoC support to change */ -extern struct s3c_gpio_cfg s3c24xx_gpiocfg_default; +extern struct samsung_gpio_cfg s3c24xx_gpiocfg_default; #ifdef CONFIG_S3C_GPIO_TRACK -extern struct s3c_gpio_chip *s3c_gpios[S3C_GPIO_END]; +extern struct samsung_gpio_chip *s3c_gpios[S3C_GPIO_END]; -static inline struct s3c_gpio_chip *s3c_gpiolib_getchip(unsigned int chip) +static inline struct samsung_gpio_chip *samsung_gpiolib_getchip(unsigned int chip) { return (chip < S3C_GPIO_END) ? s3c_gpios[chip] : NULL; } #else -/* machine specific code should provide s3c_gpiolib_getchip */ +/* machine specific code should provide samsung_gpiolib_getchip */ #include <mach/gpio-track.h> -static inline void s3c_gpiolib_track(struct s3c_gpio_chip *chip) { } +static inline void s3c_gpiolib_track(struct samsung_gpio_chip *chip) { } #endif #ifdef CONFIG_PM -extern struct s3c_gpio_pm s3c_gpio_pm_1bit; -extern struct s3c_gpio_pm s3c_gpio_pm_2bit; -extern struct s3c_gpio_pm s3c_gpio_pm_4bit; +extern struct samsung_gpio_pm samsung_gpio_pm_1bit; +extern struct samsung_gpio_pm samsung_gpio_pm_2bit; +extern struct samsung_gpio_pm samsung_gpio_pm_4bit; #define __gpio_pm(x) x #else -#define s3c_gpio_pm_1bit NULL -#define s3c_gpio_pm_2bit NULL -#define s3c_gpio_pm_4bit NULL +#define samsung_gpio_pm_1bit NULL +#define samsung_gpio_pm_2bit NULL +#define samsung_gpio_pm_4bit NULL #define __gpio_pm(x) NULL #endif /* CONFIG_PM */ /* locking wrappers to deal with multiple access to the same gpio bank */ -#define s3c_gpio_lock(_oc, _fl) spin_lock_irqsave(&(_oc)->lock, _fl) -#define s3c_gpio_unlock(_oc, _fl) spin_unlock_irqrestore(&(_oc)->lock, _fl) +#define samsung_gpio_lock(_oc, _fl) spin_lock_irqsave(&(_oc)->lock, _fl) +#define samsung_gpio_unlock(_oc, _fl) spin_unlock_irqrestore(&(_oc)->lock, _fl) diff --git a/arch/arm/plat-samsung/include/plat/gpio-fns.h b/arch/arm/plat-samsung/include/plat/gpio-fns.h new file mode 100644 index 0000000..bab1392 --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/gpio-fns.h @@ -0,0 +1,98 @@ +/* arch/arm/mach-s3c2410/include/mach/gpio-fns.h + * + * Copyright (c) 2003-2009 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * S3C2410 - hardware + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __MACH_GPIO_FNS_H +#define __MACH_GPIO_FNS_H __FILE__ + +/* These functions are in the to-be-removed category and it is strongly + * encouraged not to use these in new code. They will be marked deprecated + * very soon. + * + * Most of the functionality can be either replaced by the gpiocfg calls + * for the s3c platform or by the generic GPIOlib API. + * + * As of 2.6.35-rc, these will be removed, with the few drivers using them + * either replaced or given a wrapper until the calls can be removed. +*/ + +#include <plat/gpio-cfg.h> + +static inline void s3c2410_gpio_cfgpin(unsigned int pin, unsigned int cfg) +{ + /* 1:1 mapping between cfgpin and setcfg calls at the moment */ + s3c_gpio_cfgpin(pin, cfg); +} + +/* external functions for GPIO support + * + * These allow various different clients to access the same GPIO + * registers without conflicting. If your driver only owns the entire + * GPIO register, then it is safe to ioremap/__raw_{read|write} to it. +*/ + +extern unsigned int s3c2410_gpio_getcfg(unsigned int pin); + +/* s3c2410_gpio_getirq + * + * turn the given pin number into the corresponding IRQ number + * + * returns: + * < 0 = no interrupt for this pin + * >=0 = interrupt number for the pin +*/ + +extern int s3c2410_gpio_getirq(unsigned int pin); + +/* s3c2410_gpio_irqfilter + * + * set the irq filtering on the given pin + * + * on = 0 => disable filtering + * 1 => enable filtering + * + * config = S3C2410_EINTFLT_PCLK or S3C2410_EINTFLT_EXTCLK orred with + * width of filter (0 through 63) + * + * +*/ + +extern int s3c2410_gpio_irqfilter(unsigned int pin, unsigned int on, + unsigned int config); + +/* s3c2410_gpio_pullup + * + * This call should be replaced with s3c_gpio_setpull(). + * + * As a note, there is currently no distinction between pull-up and pull-down + * in the s3c24xx series devices with only an on/off configuration. + */ + +/* s3c2410_gpio_pullup + * + * configure the pull-up control on the given pin + * + * to = 1 => disable the pull-up + * 0 => enable the pull-up + * + * eg; + * + * s3c2410_gpio_pullup(S3C2410_GPB(0), 0); + * s3c2410_gpio_pullup(S3C2410_GPE(8), 0); +*/ + +extern void s3c2410_gpio_pullup(unsigned int pin, unsigned int to); + +extern void s3c2410_gpio_setpin(unsigned int pin, unsigned int to); + +extern unsigned int s3c2410_gpio_getpin(unsigned int pin); + +#endif /* __MACH_GPIO_FNS_H */ diff --git a/arch/arm/plat-samsung/include/plat/iic.h b/arch/arm/plat-samsung/include/plat/iic.h index 56b0059..51d52e7 100644 --- a/arch/arm/plat-samsung/include/plat/iic.h +++ b/arch/arm/plat-samsung/include/plat/iic.h @@ -60,6 +60,7 @@ extern void s3c_i2c4_set_platdata(struct s3c2410_platform_i2c *i2c); extern void s3c_i2c5_set_platdata(struct s3c2410_platform_i2c *i2c); extern void s3c_i2c6_set_platdata(struct s3c2410_platform_i2c *i2c); extern void s3c_i2c7_set_platdata(struct s3c2410_platform_i2c *i2c); +extern void s5p_i2c_hdmiphy_set_platdata(struct s3c2410_platform_i2c *i2c); /* defined by architecture to configure gpio */ extern void s3c_i2c0_cfg_gpio(struct platform_device *dev); diff --git a/arch/arm/plat-s3c24xx/include/plat/irq.h b/arch/arm/plat-samsung/include/plat/irq.h index ec087d6..e21a89b 100644 --- a/arch/arm/plat-s3c24xx/include/plat/irq.h +++ b/arch/arm/plat-samsung/include/plat/irq.h @@ -1,4 +1,4 @@ -/* linux/include/asm-arm/plat-s3c24xx/irq.h +/* linux/arch/arm/plat-samsung/include/plat/irq.h * * Copyright (c) 2004-2005 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> @@ -25,9 +25,9 @@ extern struct irq_chip s3c_irq_level_chip; extern struct irq_chip s3c_irq_chip; -static inline void -s3c_irqsub_mask(unsigned int irqno, unsigned int parentbit, - int subcheck) +static inline void s3c_irqsub_mask(unsigned int irqno, + unsigned int parentbit, + int subcheck) { unsigned long mask; unsigned long submask; @@ -39,17 +39,16 @@ s3c_irqsub_mask(unsigned int irqno, unsigned int parentbit, /* check to see if we need to mask the parent IRQ */ - if ((submask & subcheck) == subcheck) { + if ((submask & subcheck) == subcheck) __raw_writel(mask | parentbit, S3C2410_INTMSK); - } /* write back masks */ __raw_writel(submask, S3C2410_INTSUBMSK); } -static inline void -s3c_irqsub_unmask(unsigned int irqno, unsigned int parentbit) +static inline void s3c_irqsub_unmask(unsigned int irqno, + unsigned int parentbit) { unsigned long mask; unsigned long submask; @@ -66,8 +65,9 @@ s3c_irqsub_unmask(unsigned int irqno, unsigned int parentbit) } -static inline void -s3c_irqsub_maskack(unsigned int irqno, unsigned int parentmask, unsigned int group) +static inline void s3c_irqsub_maskack(unsigned int irqno, + unsigned int parentmask, + unsigned int group) { unsigned int bit = 1UL << (irqno - IRQ_S3CUART_RX0); @@ -86,8 +86,9 @@ s3c_irqsub_maskack(unsigned int irqno, unsigned int parentmask, unsigned int gro } } -static inline void -s3c_irqsub_ack(unsigned int irqno, unsigned int parentmask, unsigned int group) +static inline void s3c_irqsub_ack(unsigned int irqno, + unsigned int parentmask, + unsigned int group) { unsigned int bit = 1UL << (irqno - IRQ_S3CUART_RX0); diff --git a/arch/arm/plat-s5p/include/plat/irqs.h b/arch/arm/plat-samsung/include/plat/irqs.h index ba9121c..94ecf8c 100644 --- a/arch/arm/plat-s5p/include/plat/irqs.h +++ b/arch/arm/plat-samsung/include/plat/irqs.h @@ -1,4 +1,4 @@ -/* linux/arch/arm/plat-s5p/include/plat/irqs.h +/* linux/arch/arm/plat-samsung/include/plat/irqs.h * * Copyright (c) 2009 Samsung Electronics Co., Ltd. * http://www.samsung.com/ @@ -10,8 +10,8 @@ * published by the Free Software Foundation. */ -#ifndef __ASM_PLAT_S5P_IRQS_H -#define __ASM_PLAT_S5P_IRQS_H __FILE__ +#ifndef __PLAT_SAMSUNG_IRQS_H +#define __PLAT_SAMSUNG_IRQS_H __FILE__ /* we keep the first set of CPU IRQs out of the range of * the ISA space, so that the PC104 has them to itself @@ -112,4 +112,4 @@ #define S5P_IRQ_TYPE_EDGE_RISING (0x03) #define S5P_IRQ_TYPE_EDGE_BOTH (0x04) -#endif /* __ASM_PLAT_S5P_IRQS_H */ +#endif /* __PLAT_SAMSUNG_IRQS_H */ diff --git a/arch/arm/plat-samsung/include/plat/map-s3c.h b/arch/arm/plat-samsung/include/plat/map-s3c.h new file mode 100644 index 0000000..7d04875 --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/map-s3c.h @@ -0,0 +1,84 @@ +/* linux/arch/arm/plat-samsung/include/plat/map-s3c.h + * + * Copyright (c) 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * S3C24XX - Memory map definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_PLAT_MAP_S3C_H +#define __ASM_PLAT_MAP_S3C_H __FILE__ + +#define S3C24XX_VA_IRQ S3C_VA_IRQ +#define S3C24XX_VA_MEMCTRL S3C_VA_MEM +#define S3C24XX_VA_UART S3C_VA_UART + +#define S3C24XX_VA_TIMER S3C_VA_TIMER +#define S3C24XX_VA_CLKPWR S3C_VA_SYS +#define S3C24XX_VA_WATCHDOG S3C_VA_WATCHDOG + +#define S3C2412_VA_SSMC S3C_ADDR_CPU(0x00000000) +#define S3C2412_VA_EBI S3C_ADDR_CPU(0x00010000) + +#define S3C2410_PA_UART (0x50000000) +#define S3C24XX_PA_UART S3C2410_PA_UART + +#ifndef S3C_UART_OFFSET +#define S3C_UART_OFFSET (0x400) +#endif + +/* + * GPIO ports + * + * the calculation for the VA of this must ensure that + * it is the same distance apart from the UART in the + * phsyical address space, as the initial mapping for the IO + * is done as a 1:1 mapping. This puts it (currently) at + * 0xFA800000, which is not in the way of any current mapping + * by the base system. +*/ + +#define S3C2410_PA_GPIO (0x56000000) +#define S3C24XX_PA_GPIO S3C2410_PA_GPIO + +#define S3C24XX_VA_GPIO ((S3C24XX_PA_GPIO - S3C24XX_PA_UART) + S3C24XX_VA_UART) +#define S3C64XX_VA_GPIO S3C_ADDR_CPU(0x00000000) + +#define S3C64XX_VA_MODEM S3C_ADDR_CPU(0x00100000) +#define S3C64XX_VA_USB_HSPHY S3C_ADDR_CPU(0x00200000) + +#define S3C_VA_USB_HSPHY S3C64XX_VA_USB_HSPHY + +/* + * ISA style IO, for each machine to sort out mappings for, + * if it implements it. We reserve two 16M regions for ISA. + */ + +#define S3C2410_ADDR(x) S3C_ADDR(x) + +#define S3C24XX_VA_ISA_WORD S3C2410_ADDR(0x02000000) +#define S3C24XX_VA_ISA_BYTE S3C2410_ADDR(0x03000000) + +/* deal with the registers that move under the 2412/2413 */ + +#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413) +#ifndef __ASSEMBLY__ +extern void __iomem *s3c24xx_va_gpio2; +#endif +#ifdef CONFIG_CPU_S3C2412_ONLY +#define S3C24XX_VA_GPIO2 (S3C24XX_VA_GPIO + 0x10) +#else +#define S3C24XX_VA_GPIO2 s3c24xx_va_gpio2 +#endif +#else +#define s3c24xx_va_gpio2 S3C24XX_VA_GPIO +#define S3C24XX_VA_GPIO2 S3C24XX_VA_GPIO +#endif + +#include <plat/map-s5p.h> + +#endif /* __ASM_PLAT_MAP_S3C_H */ diff --git a/arch/arm/plat-s5p/include/plat/map-s5p.h b/arch/arm/plat-samsung/include/plat/map-s5p.h index 36d3551..c2d7bda 100644 --- a/arch/arm/plat-s5p/include/plat/map-s5p.h +++ b/arch/arm/plat-samsung/include/plat/map-s5p.h @@ -1,4 +1,4 @@ -/* linux/arch/arm/plat-s5p/include/plat/map-s5p.h +/* linux/arch/arm/plat-samsung/include/plat/map-s5p.h * * Copyright (c) 2010 Samsung Electronics Co., Ltd. * http://www.samsung.com/ @@ -40,8 +40,6 @@ #define S5P_VA_GIC_CPU S3C_ADDR(0x02810000) #define S5P_VA_GIC_DIST S3C_ADDR(0x02820000) -#define S3C_VA_USB_HSPHY S3C_ADDR(0x02900000) - #define VA_VIC(x) (S3C_VA_IRQ + ((x) * 0x10000)) #define VA_VIC0 VA_VIC(0) #define VA_VIC1 VA_VIC(1) @@ -58,4 +56,6 @@ #define S3C_UART_OFFSET (0x400) #endif +#include <plat/map-s3c.h> + #endif /* __ASM_PLAT_MAP_S5P_H */ diff --git a/arch/arm/plat-s3c24xx/include/plat/mci.h b/arch/arm/plat-samsung/include/plat/mci.h index 2ac2b21..c42d317 100644 --- a/arch/arm/plat-s3c24xx/include/plat/mci.h +++ b/arch/arm/plat-samsung/include/plat/mci.h @@ -27,11 +27,11 @@ * to a non-zero value, otherwise the default of 3.2-3.4V is used. */ struct s3c24xx_mci_pdata { - unsigned int no_wprotect : 1; - unsigned int no_detect : 1; - unsigned int wprotect_invert : 1; - unsigned int detect_invert : 1; /* set => detect active high. */ - unsigned int use_dma : 1; + unsigned int no_wprotect:1; + unsigned int no_detect:1; + unsigned int wprotect_invert:1; + unsigned int detect_invert:1; /* set => detect active high */ + unsigned int use_dma:1; unsigned int gpio_detect; unsigned int gpio_wprotect; diff --git a/arch/arm/plat-s5p/include/plat/mfc.h b/arch/arm/plat-samsung/include/plat/mfc.h index 6697f8c..ac13227 100644 --- a/arch/arm/plat-s5p/include/plat/mfc.h +++ b/arch/arm/plat-samsung/include/plat/mfc.h @@ -7,8 +7,8 @@ * option) any later version. */ -#ifndef __PLAT_S5P_MFC_H -#define __PLAT_S5P_MFC_H +#ifndef __PLAT_SAMSUNG_MFC_H +#define __PLAT_SAMSUNG_MFC_H __FILE__ /** * s5p_mfc_reserve_mem - function to early reserve memory for MFC driver @@ -24,4 +24,4 @@ void __init s5p_mfc_reserve_mem(phys_addr_t rbase, unsigned int rsize, phys_addr_t lbase, unsigned int lsize); -#endif /* __PLAT_S5P_MFC_H */ +#endif /* __PLAT_SAMSUNG_MFC_H */ diff --git a/arch/arm/plat-s5p/include/plat/mipi_csis.h b/arch/arm/plat-samsung/include/plat/mipi_csis.h index 9bd254c..c45b1e8 100644 --- a/arch/arm/plat-s5p/include/plat/mipi_csis.h +++ b/arch/arm/plat-samsung/include/plat/mipi_csis.h @@ -8,8 +8,8 @@ * published by the Free Software Foundation. */ -#ifndef PLAT_S5P_MIPI_CSIS_H_ -#define PLAT_S5P_MIPI_CSIS_H_ __FILE__ +#ifndef __PLAT_SAMSUNG_MIPI_CSIS_H_ +#define __PLAT_SAMSUNG_MIPI_CSIS_H_ __FILE__ struct platform_device; @@ -40,4 +40,4 @@ struct s5p_platform_mipi_csis { */ int s5p_csis_phy_enable(struct platform_device *pdev, bool on); -#endif /* PLAT_S5P_MIPI_CSIS_H_ */ +#endif /* __PLAT_SAMSUNG_MIPI_CSIS_H_ */ diff --git a/arch/arm/plat-s5p/include/plat/pll.h b/arch/arm/plat-samsung/include/plat/pll.h index 1bfd61a..357af7c 100644 --- a/arch/arm/plat-s5p/include/plat/pll.h +++ b/arch/arm/plat-samsung/include/plat/pll.h @@ -1,11 +1,14 @@ -/* arch/arm/plat-s5p/include/plat/pll.h +/* linux/arch/arm/plat-samsung/include/plat/pll.h * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. + * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd. * http://www.samsung.com/ * - * S5P PLL code + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ * - * Based on arch/arm/plat-s3c64xx/include/plat/pll.h + * Samsung PLL codes * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as @@ -14,6 +17,111 @@ #include <asm/div64.h> +#define S3C24XX_PLL_MDIV_MASK (0xFF) +#define S3C24XX_PLL_PDIV_MASK (0x1F) +#define S3C24XX_PLL_SDIV_MASK (0x3) +#define S3C24XX_PLL_MDIV_SHIFT (12) +#define S3C24XX_PLL_PDIV_SHIFT (4) +#define S3C24XX_PLL_SDIV_SHIFT (0) + +static inline unsigned int s3c24xx_get_pll(unsigned int pllval, + unsigned int baseclk) +{ + unsigned int mdiv, pdiv, sdiv; + uint64_t fvco; + + mdiv = (pllval >> S3C24XX_PLL_MDIV_SHIFT) & S3C24XX_PLL_MDIV_MASK; + pdiv = (pllval >> S3C24XX_PLL_PDIV_SHIFT) & S3C24XX_PLL_PDIV_MASK; + sdiv = (pllval >> S3C24XX_PLL_SDIV_SHIFT) & S3C24XX_PLL_SDIV_MASK; + + fvco = (uint64_t)baseclk * (mdiv + 8); + do_div(fvco, (pdiv + 2) << sdiv); + + return (unsigned int)fvco; +} + +#define S3C2416_PLL_MDIV_MASK (0x3FF) +#define S3C2416_PLL_PDIV_MASK (0x3F) +#define S3C2416_PLL_SDIV_MASK (0x7) +#define S3C2416_PLL_MDIV_SHIFT (14) +#define S3C2416_PLL_PDIV_SHIFT (5) +#define S3C2416_PLL_SDIV_SHIFT (0) + +static inline unsigned int s3c2416_get_pll(unsigned int pllval, + unsigned int baseclk) +{ + unsigned int mdiv, pdiv, sdiv; + uint64_t fvco; + + mdiv = (pllval >> S3C2416_PLL_MDIV_SHIFT) & S3C2416_PLL_MDIV_MASK; + pdiv = (pllval >> S3C2416_PLL_PDIV_SHIFT) & S3C2416_PLL_PDIV_MASK; + sdiv = (pllval >> S3C2416_PLL_SDIV_SHIFT) & S3C2416_PLL_SDIV_MASK; + + fvco = (uint64_t)baseclk * mdiv; + do_div(fvco, (pdiv << sdiv)); + + return (unsigned int)fvco; +} + +#define S3C6400_PLL_MDIV_MASK (0x3FF) +#define S3C6400_PLL_PDIV_MASK (0x3F) +#define S3C6400_PLL_SDIV_MASK (0x7) +#define S3C6400_PLL_MDIV_SHIFT (16) +#define S3C6400_PLL_PDIV_SHIFT (8) +#define S3C6400_PLL_SDIV_SHIFT (0) + +static inline unsigned long s3c6400_get_pll(unsigned long baseclk, + u32 pllcon) +{ + u32 mdiv, pdiv, sdiv; + u64 fvco = baseclk; + + mdiv = (pllcon >> S3C6400_PLL_MDIV_SHIFT) & S3C6400_PLL_MDIV_MASK; + pdiv = (pllcon >> S3C6400_PLL_PDIV_SHIFT) & S3C6400_PLL_PDIV_MASK; + sdiv = (pllcon >> S3C6400_PLL_SDIV_SHIFT) & S3C6400_PLL_SDIV_MASK; + + fvco *= mdiv; + do_div(fvco, (pdiv << sdiv)); + + return (unsigned long)fvco; +} + +#define PLL6553X_MDIV_MASK (0x7F) +#define PLL6553X_PDIV_MASK (0x1F) +#define PLL6553X_SDIV_MASK (0x3) +#define PLL6553X_KDIV_MASK (0xFFFF) +#define PLL6553X_MDIV_SHIFT (16) +#define PLL6553X_PDIV_SHIFT (8) +#define PLL6553X_SDIV_SHIFT (0) + +static inline unsigned long s3c_get_pll6553x(unsigned long baseclk, + u32 pll_con0, u32 pll_con1) +{ + unsigned long result; + u32 mdiv, pdiv, sdiv, kdiv; + u64 tmp; + + mdiv = (pll_con0 >> PLL6553X_MDIV_SHIFT) & PLL6553X_MDIV_MASK; + pdiv = (pll_con0 >> PLL6553X_PDIV_SHIFT) & PLL6553X_PDIV_MASK; + sdiv = (pll_con0 >> PLL6553X_SDIV_SHIFT) & PLL6553X_SDIV_MASK; + kdiv = pll_con1 & PLL6553X_KDIV_MASK; + + /* + * We need to multiple baseclk by mdiv (the integer part) and kdiv + * which is in 2^16ths, so shift mdiv up (does not overflow) and + * add kdiv before multiplying. The use of tmp is to avoid any + * overflows before shifting bac down into result when multipling + * by the mdiv and kdiv pair. + */ + + tmp = baseclk; + tmp *= (mdiv << 16) + kdiv; + do_div(tmp, (pdiv << sdiv)); + result = tmp >> 16; + + return result; +} + #define PLL35XX_MDIV_MASK (0x3FF) #define PLL35XX_PDIV_MASK (0x3F) #define PLL35XX_SDIV_MASK (0x7) @@ -97,15 +205,24 @@ static inline unsigned long s5p_get_pll45xx(unsigned long baseclk, u32 pll_con, return (unsigned long)fvco; } -#define PLL46XX_KDIV_MASK (0xFFFF) -#define PLL4650C_KDIV_MASK (0xFFF) +/* CON0 bit-fields */ #define PLL46XX_MDIV_MASK (0x1FF) #define PLL46XX_PDIV_MASK (0x3F) #define PLL46XX_SDIV_MASK (0x7) +#define PLL46XX_LOCKED_SHIFT (29) #define PLL46XX_MDIV_SHIFT (16) #define PLL46XX_PDIV_SHIFT (8) #define PLL46XX_SDIV_SHIFT (0) +/* CON1 bit-fields */ +#define PLL46XX_MRR_MASK (0x1F) +#define PLL46XX_MFR_MASK (0x3F) +#define PLL46XX_KDIV_MASK (0xFFFF) +#define PLL4650C_KDIV_MASK (0xFFF) +#define PLL46XX_MRR_SHIFT (24) +#define PLL46XX_MFR_SHIFT (16) +#define PLL46XX_KDIV_SHIFT (0) + enum pll46xx_type_t { pll_4600, pll_4650, @@ -149,6 +266,7 @@ static inline unsigned long s5p_get_pll46xx(unsigned long baseclk, #define PLL90XX_PDIV_MASK (0x3F) #define PLL90XX_SDIV_MASK (0x7) #define PLL90XX_KDIV_MASK (0xffff) +#define PLL90XX_LOCKED_SHIFT (29) #define PLL90XX_MDIV_SHIFT (16) #define PLL90XX_PDIV_SHIFT (8) #define PLL90XX_SDIV_SHIFT (0) @@ -166,7 +284,8 @@ static inline unsigned long s5p_get_pll90xx(unsigned long baseclk, sdiv = (pll_con >> PLL90XX_SDIV_SHIFT) & PLL90XX_SDIV_MASK; kdiv = pll_conk & PLL90XX_KDIV_MASK; - /* We need to multiple baseclk by mdiv (the integer part) and kdiv + /* + * We need to multiple baseclk by mdiv (the integer part) and kdiv * which is in 2^16ths, so shift mdiv up (does not overflow) and * add kdiv before multiplying. The use of tmp is to avoid any * overflows before shifting bac down into result when multipling diff --git a/arch/arm/plat-samsung/include/plat/pll6553x.h b/arch/arm/plat-samsung/include/plat/pll6553x.h deleted file mode 100644 index b8b7e1d..0000000 --- a/arch/arm/plat-samsung/include/plat/pll6553x.h +++ /dev/null @@ -1,51 +0,0 @@ -/* arch/arm/plat-samsung/include/plat/pll6553x.h - * partially from arch/arm/mach-s3c64xx/include/mach/pll.h - * - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * Samsung PLL6553x PLL code - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -/* S3C6400 and compatible (S3C2416, etc.) EPLL code */ - -#define PLL6553X_MDIV_MASK ((1 << (23-16)) - 1) -#define PLL6553X_PDIV_MASK ((1 << (13-8)) - 1) -#define PLL6553X_SDIV_MASK ((1 << (2-0)) - 1) -#define PLL6553X_MDIV_SHIFT (16) -#define PLL6553X_PDIV_SHIFT (8) -#define PLL6553X_SDIV_SHIFT (0) -#define PLL6553X_KDIV_MASK (0xffff) - -static inline unsigned long s3c_get_pll6553x(unsigned long baseclk, - u32 pll0, u32 pll1) -{ - unsigned long result; - u32 mdiv, pdiv, sdiv, kdiv; - u64 tmp; - - mdiv = (pll0 >> PLL6553X_MDIV_SHIFT) & PLL6553X_MDIV_MASK; - pdiv = (pll0 >> PLL6553X_PDIV_SHIFT) & PLL6553X_PDIV_MASK; - sdiv = (pll0 >> PLL6553X_SDIV_SHIFT) & PLL6553X_SDIV_MASK; - kdiv = pll1 & PLL6553X_KDIV_MASK; - - /* We need to multiple baseclk by mdiv (the integer part) and kdiv - * which is in 2^16ths, so shift mdiv up (does not overflow) and - * add kdiv before multiplying. The use of tmp is to avoid any - * overflows before shifting bac down into result when multipling - * by the mdiv and kdiv pair. - */ - - tmp = baseclk; - tmp *= (mdiv << 16) + kdiv; - do_div(tmp, (pdiv << sdiv)); - result = tmp >> 16; - - return result; -} diff --git a/arch/arm/plat-samsung/include/plat/pm.h b/arch/arm/plat-samsung/include/plat/pm.h index f674991..dcf6870 100644 --- a/arch/arm/plat-samsung/include/plat/pm.h +++ b/arch/arm/plat-samsung/include/plat/pm.h @@ -165,20 +165,20 @@ extern void s3c_pm_check_store(void); extern void s3c_pm_configure_extint(void); /** - * s3c_pm_restore_gpios() - restore the state of the gpios after sleep. + * samsung_pm_restore_gpios() - restore the state of the gpios after sleep. * * Restore the state of the GPIO pins after sleep, which may involve ensuring * that we do not glitch the state of the pins from that the bootloader's * resume code has done. */ -extern void s3c_pm_restore_gpios(void); +extern void samsung_pm_restore_gpios(void); /** - * s3c_pm_save_gpios() - save the state of the GPIOs for restoring after sleep. + * samsung_pm_save_gpios() - save the state of the GPIOs for restoring after sleep. * - * Save the GPIO states for resotration on resume. See s3c_pm_restore_gpios(). + * Save the GPIO states for resotration on resume. See samsung_pm_restore_gpios(). */ -extern void s3c_pm_save_gpios(void); +extern void samsung_pm_save_gpios(void); extern void s3c_pm_save_core(void); extern void s3c_pm_restore_core(void); diff --git a/arch/arm/mach-exynos4/include/mach/pwm-clock.h b/arch/arm/plat-samsung/include/plat/pwm-clock.h index 8e12090..bf6a60e 100644 --- a/arch/arm/mach-exynos4/include/mach/pwm-clock.h +++ b/arch/arm/plat-samsung/include/plat/pwm-clock.h @@ -1,4 +1,4 @@ -/* linux/arch/arm/mach-exynos4/include/mach/pwm-clock.h +/* linux/arch/arm/plat-samsung/include/plat/pwm-clock.h * * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. * http://www.samsung.com @@ -8,17 +8,15 @@ * Ben Dooks <ben@simtec.co.uk> * http://armlinux.simtec.co.uk/ * - * Based on arch/arm/mach-s3c64xx/include/mach/pwm-clock.h - * - * EXYNOS4 - pwm clock and timer support + * SAMSUNG - pwm clock and timer support * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. */ -#ifndef __ASM_ARCH_PWMCLK_H -#define __ASM_ARCH_PWMCLK_H __FILE__ +#ifndef __ASM_PLAT_PWM_CLOCK_H +#define __ASM_PLAT_PWM_CLOCK_H __FILE__ /** * pwm_cfg_src_is_tclk() - return whether the given mux config is a tclk @@ -29,7 +27,14 @@ */ static inline int pwm_cfg_src_is_tclk(unsigned long tcfg) { - return tcfg == S3C64XX_TCFG1_MUX_TCLK; + if (soc_is_s3c24xx()) + return tcfg == S3C2410_TCFG1_MUX_TCLK; + else if (soc_is_s3c64xx() || soc_is_s5pc100()) + return tcfg >= S3C64XX_TCFG1_MUX_TCLK; + else if (soc_is_s5p6440() || soc_is_s5p6450()) + return 0; + else + return tcfg == S3C64XX_TCFG1_MUX_TCLK; } /** @@ -41,7 +46,10 @@ static inline int pwm_cfg_src_is_tclk(unsigned long tcfg) */ static inline unsigned long tcfg_to_divisor(unsigned long tcfg1) { - return 1 << tcfg1; + if (soc_is_s3c24xx()) + return 1 << (tcfg1 + 1); + else + return 1 << tcfg1; } /** @@ -51,7 +59,10 @@ static inline unsigned long tcfg_to_divisor(unsigned long tcfg1) */ static inline unsigned int pwm_tdiv_has_div1(void) { - return 1; + if (soc_is_s3c24xx()) + return 0; + else + return 1; } /** @@ -62,9 +73,9 @@ static inline unsigned int pwm_tdiv_has_div1(void) */ static inline unsigned long pwm_tdiv_div_bits(unsigned int div) { - return ilog2(div); + if (soc_is_s3c24xx()) + return ilog2(div) - 1; + else + return ilog2(div); } - -#define S3C_TCFG1_MUX_TCLK S3C64XX_TCFG1_MUX_TCLK - -#endif /* __ASM_ARCH_PWMCLK_H */ +#endif /* __ASM_PLAT_PWM_CLOCK_H */ diff --git a/arch/arm/plat-s3c24xx/include/plat/regs-dma.h b/arch/arm/plat-samsung/include/plat/regs-dma.h index 1b0f4c3..178bccb 100644 --- a/arch/arm/plat-s3c24xx/include/plat/regs-dma.h +++ b/arch/arm/plat-samsung/include/plat/regs-dma.h @@ -1,4 +1,4 @@ -/* arch/arm/mach-s3c2410/include/mach/dma.h +/* arch/arm/plat-samsung/include/plat/regs-dma.h * * Copyright (C) 2003-2006 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> @@ -10,7 +10,8 @@ * published by the Free Software Foundation. */ -/* DMA Register definitions */ +#ifndef __ASM_PLAT_REGS_DMA_H +#define __ASM_PLAT_REGS_DMA_H __FILE__ #define S3C2410_DMA_DISRC (0x00) #define S3C2410_DMA_DISRCC (0x04) @@ -24,74 +25,75 @@ #define S3C2412_DMA_DMAREQSEL (0x24) #define S3C2443_DMA_DMAREQSEL (0x24) -#define S3C2410_DISRCC_INC (1<<0) -#define S3C2410_DISRCC_APB (1<<1) +#define S3C2410_DISRCC_INC (1 << 0) +#define S3C2410_DISRCC_APB (1 << 1) -#define S3C2410_DMASKTRIG_STOP (1<<2) -#define S3C2410_DMASKTRIG_ON (1<<1) -#define S3C2410_DMASKTRIG_SWTRIG (1<<0) +#define S3C2410_DMASKTRIG_STOP (1 << 2) +#define S3C2410_DMASKTRIG_ON (1 << 1) +#define S3C2410_DMASKTRIG_SWTRIG (1 << 0) -#define S3C2410_DCON_DEMAND (0<<31) -#define S3C2410_DCON_HANDSHAKE (1<<31) -#define S3C2410_DCON_SYNC_PCLK (0<<30) -#define S3C2410_DCON_SYNC_HCLK (1<<30) +#define S3C2410_DCON_DEMAND (0 << 31) +#define S3C2410_DCON_HANDSHAKE (1 << 31) +#define S3C2410_DCON_SYNC_PCLK (0 << 30) +#define S3C2410_DCON_SYNC_HCLK (1 << 30) -#define S3C2410_DCON_INTREQ (1<<29) +#define S3C2410_DCON_INTREQ (1 << 29) -#define S3C2410_DCON_CH0_XDREQ0 (0<<24) -#define S3C2410_DCON_CH0_UART0 (1<<24) -#define S3C2410_DCON_CH0_SDI (2<<24) -#define S3C2410_DCON_CH0_TIMER (3<<24) -#define S3C2410_DCON_CH0_USBEP1 (4<<24) +#define S3C2410_DCON_CH0_XDREQ0 (0 << 24) +#define S3C2410_DCON_CH0_UART0 (1 << 24) +#define S3C2410_DCON_CH0_SDI (2 << 24) +#define S3C2410_DCON_CH0_TIMER (3 << 24) +#define S3C2410_DCON_CH0_USBEP1 (4 << 24) -#define S3C2410_DCON_CH1_XDREQ1 (0<<24) -#define S3C2410_DCON_CH1_UART1 (1<<24) -#define S3C2410_DCON_CH1_I2SSDI (2<<24) -#define S3C2410_DCON_CH1_SPI (3<<24) -#define S3C2410_DCON_CH1_USBEP2 (4<<24) +#define S3C2410_DCON_CH1_XDREQ1 (0 << 24) +#define S3C2410_DCON_CH1_UART1 (1 << 24) +#define S3C2410_DCON_CH1_I2SSDI (2 << 24) +#define S3C2410_DCON_CH1_SPI (3 << 24) +#define S3C2410_DCON_CH1_USBEP2 (4 << 24) -#define S3C2410_DCON_CH2_I2SSDO (0<<24) -#define S3C2410_DCON_CH2_I2SSDI (1<<24) -#define S3C2410_DCON_CH2_SDI (2<<24) -#define S3C2410_DCON_CH2_TIMER (3<<24) -#define S3C2410_DCON_CH2_USBEP3 (4<<24) +#define S3C2410_DCON_CH2_I2SSDO (0 << 24) +#define S3C2410_DCON_CH2_I2SSDI (1 << 24) +#define S3C2410_DCON_CH2_SDI (2 << 24) +#define S3C2410_DCON_CH2_TIMER (3 << 24) +#define S3C2410_DCON_CH2_USBEP3 (4 << 24) -#define S3C2410_DCON_CH3_UART2 (0<<24) -#define S3C2410_DCON_CH3_SDI (1<<24) -#define S3C2410_DCON_CH3_SPI (2<<24) -#define S3C2410_DCON_CH3_TIMER (3<<24) -#define S3C2410_DCON_CH3_USBEP4 (4<<24) +#define S3C2410_DCON_CH3_UART2 (0 << 24) +#define S3C2410_DCON_CH3_SDI (1 << 24) +#define S3C2410_DCON_CH3_SPI (2 << 24) +#define S3C2410_DCON_CH3_TIMER (3 << 24) +#define S3C2410_DCON_CH3_USBEP4 (4 << 24) #define S3C2410_DCON_SRCSHIFT (24) -#define S3C2410_DCON_SRCMASK (7<<24) +#define S3C2410_DCON_SRCMASK (7 << 24) -#define S3C2410_DCON_BYTE (0<<20) -#define S3C2410_DCON_HALFWORD (1<<20) -#define S3C2410_DCON_WORD (2<<20) +#define S3C2410_DCON_BYTE (0 << 20) +#define S3C2410_DCON_HALFWORD (1 << 20) +#define S3C2410_DCON_WORD (2 << 20) -#define S3C2410_DCON_AUTORELOAD (0<<22) -#define S3C2410_DCON_NORELOAD (1<<22) -#define S3C2410_DCON_HWTRIG (1<<23) +#define S3C2410_DCON_AUTORELOAD (0 << 22) +#define S3C2410_DCON_NORELOAD (1 << 22) +#define S3C2410_DCON_HWTRIG (1 << 23) #ifdef CONFIG_CPU_S3C2440 -#define S3C2440_DIDSTC_CHKINT (1<<2) -#define S3C2440_DCON_CH0_I2SSDO (5<<24) -#define S3C2440_DCON_CH0_PCMIN (6<<24) +#define S3C2440_DIDSTC_CHKINT (1 << 2) -#define S3C2440_DCON_CH1_PCMOUT (5<<24) -#define S3C2440_DCON_CH1_SDI (6<<24) +#define S3C2440_DCON_CH0_I2SSDO (5 << 24) +#define S3C2440_DCON_CH0_PCMIN (6 << 24) -#define S3C2440_DCON_CH2_PCMIN (5<<24) -#define S3C2440_DCON_CH2_MICIN (6<<24) +#define S3C2440_DCON_CH1_PCMOUT (5 << 24) +#define S3C2440_DCON_CH1_SDI (6 << 24) -#define S3C2440_DCON_CH3_MICIN (5<<24) -#define S3C2440_DCON_CH3_PCMOUT (6<<24) -#endif +#define S3C2440_DCON_CH2_PCMIN (5 << 24) +#define S3C2440_DCON_CH2_MICIN (6 << 24) + +#define S3C2440_DCON_CH3_MICIN (5 << 24) +#define S3C2440_DCON_CH3_PCMOUT (6 << 24) +#endif /* CONFIG_CPU_S3C2440 */ #ifdef CONFIG_CPU_S3C2412 -#define S3C2412_DMAREQSEL_SRC(x) ((x)<<1) +#define S3C2412_DMAREQSEL_SRC(x) ((x) << 1) #define S3C2412_DMAREQSEL_HW (1) @@ -115,10 +117,11 @@ #define S3C2412_DMAREQSEL_UART1_1 S3C2412_DMAREQSEL_SRC(22) #define S3C2412_DMAREQSEL_UART2_0 S3C2412_DMAREQSEL_SRC(23) #define S3C2412_DMAREQSEL_UART2_1 S3C2412_DMAREQSEL_SRC(24) +#endif /* CONFIG_CPU_S3C2412 */ -#endif +#ifdef CONFIG_CPU_S3C2443 -#define S3C2443_DMAREQSEL_SRC(x) ((x)<<1) +#define S3C2443_DMAREQSEL_SRC(x) ((x) << 1) #define S3C2443_DMAREQSEL_HW (1) @@ -141,5 +144,8 @@ #define S3C2443_DMAREQSEL_UART3_0 S3C2443_DMAREQSEL_SRC(25) #define S3C2443_DMAREQSEL_UART3_1 S3C2443_DMAREQSEL_SRC(26) #define S3C2443_DMAREQSEL_PCMOUT S3C2443_DMAREQSEL_SRC(27) -#define S3C2443_DMAREQSEL_PCMIN S3C2443_DMAREQSEL_SRC(28) +#define S3C2443_DMAREQSEL_PCMIN S3C2443_DMAREQSEL_SRC(28) #define S3C2443_DMAREQSEL_MICIN S3C2443_DMAREQSEL_SRC(29) +#endif /* CONFIG_CPU_S3C2443 */ + +#endif /* __ASM_PLAT_REGS_DMA_H */ diff --git a/arch/arm/plat-samsung/include/plat/regs-iis.h b/arch/arm/plat-samsung/include/plat/regs-iis.h new file mode 100644 index 0000000..a18d35e --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/regs-iis.h @@ -0,0 +1,70 @@ +/* arch/arm/plat-samsung/include/plat/regs-iis.h + * + * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk> + * http://www.simtec.co.uk/products/SWLINUX/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * S3C2410 IIS register definition +*/ + +#ifndef __ASM_ARCH_REGS_IIS_H +#define __ASM_ARCH_REGS_IIS_H + +#define S3C2410_IISCON (0x00) + +#define S3C2410_IISCON_LRINDEX (1 << 8) +#define S3C2410_IISCON_TXFIFORDY (1 << 7) +#define S3C2410_IISCON_RXFIFORDY (1 << 6) +#define S3C2410_IISCON_TXDMAEN (1 << 5) +#define S3C2410_IISCON_RXDMAEN (1 << 4) +#define S3C2410_IISCON_TXIDLE (1 << 3) +#define S3C2410_IISCON_RXIDLE (1 << 2) +#define S3C2410_IISCON_PSCEN (1 << 1) +#define S3C2410_IISCON_IISEN (1 << 0) + +#define S3C2410_IISMOD (0x04) + +#define S3C2440_IISMOD_MPLL (1 << 9) +#define S3C2410_IISMOD_SLAVE (1 << 8) +#define S3C2410_IISMOD_NOXFER (0 << 6) +#define S3C2410_IISMOD_RXMODE (1 << 6) +#define S3C2410_IISMOD_TXMODE (2 << 6) +#define S3C2410_IISMOD_TXRXMODE (3 << 6) +#define S3C2410_IISMOD_LR_LLOW (0 << 5) +#define S3C2410_IISMOD_LR_RLOW (1 << 5) +#define S3C2410_IISMOD_IIS (0 << 4) +#define S3C2410_IISMOD_MSB (1 << 4) +#define S3C2410_IISMOD_8BIT (0 << 3) +#define S3C2410_IISMOD_16BIT (1 << 3) +#define S3C2410_IISMOD_BITMASK (1 << 3) +#define S3C2410_IISMOD_256FS (0 << 2) +#define S3C2410_IISMOD_384FS (1 << 2) +#define S3C2410_IISMOD_16FS (0 << 0) +#define S3C2410_IISMOD_32FS (1 << 0) +#define S3C2410_IISMOD_48FS (2 << 0) +#define S3C2410_IISMOD_FS_MASK (3 << 0) + +#define S3C2410_IISPSR (0x08) + +#define S3C2410_IISPSR_INTMASK (31 << 5) +#define S3C2410_IISPSR_INTSHIFT (5) +#define S3C2410_IISPSR_EXTMASK (31 << 0) +#define S3C2410_IISPSR_EXTSHFIT (0) + +#define S3C2410_IISFCON (0x0c) + +#define S3C2410_IISFCON_TXDMA (1 << 15) +#define S3C2410_IISFCON_RXDMA (1 << 14) +#define S3C2410_IISFCON_TXENABLE (1 << 13) +#define S3C2410_IISFCON_RXENABLE (1 << 12) +#define S3C2410_IISFCON_TXMASK (0x3f << 6) +#define S3C2410_IISFCON_TXSHIFT (6) +#define S3C2410_IISFCON_RXMASK (0x3f) +#define S3C2410_IISFCON_RXSHIFT (0) + +#define S3C2410_IISFIFO (0x10) + +#endif /* __ASM_ARCH_REGS_IIS_H */ diff --git a/arch/arm/plat-samsung/include/plat/regs-spi.h b/arch/arm/plat-samsung/include/plat/regs-spi.h new file mode 100644 index 0000000..552fe7c --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/regs-spi.h @@ -0,0 +1,48 @@ +/* arch/arm/plat-samsung/include/plat/regs-spi.h + * + * Copyright (c) 2004 Fetron GmbH + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * S3C2410 SPI register definition +*/ + +#ifndef __ASM_ARCH_REGS_SPI_H +#define __ASM_ARCH_REGS_SPI_H + +#define S3C2410_SPI1 (0x20) +#define S3C2412_SPI1 (0x100) + +#define S3C2410_SPCON (0x00) + +#define S3C2410_SPCON_SMOD_DMA (2 << 5) /* DMA mode */ +#define S3C2410_SPCON_SMOD_INT (1 << 5) /* interrupt mode */ +#define S3C2410_SPCON_SMOD_POLL (0 << 5) /* polling mode */ +#define S3C2410_SPCON_ENSCK (1 << 4) /* Enable SCK */ +#define S3C2410_SPCON_MSTR (1 << 3) /* Master:1, Slave:0 select */ +#define S3C2410_SPCON_CPOL_HIGH (1 << 2) /* Clock polarity select */ +#define S3C2410_SPCON_CPOL_LOW (0 << 2) /* Clock polarity select */ + +#define S3C2410_SPCON_CPHA_FMTB (1 << 1) /* Clock Phase Select */ +#define S3C2410_SPCON_CPHA_FMTA (0 << 1) /* Clock Phase Select */ + +#define S3C2410_SPSTA (0x04) + +#define S3C2410_SPSTA_DCOL (1 << 2) /* Data Collision Error */ +#define S3C2410_SPSTA_MULD (1 << 1) /* Multi Master Error */ +#define S3C2410_SPSTA_READY (1 << 0) /* Data Tx/Rx ready */ +#define S3C2412_SPSTA_READY_ORG (1 << 3) + +#define S3C2410_SPPIN (0x08) + +#define S3C2410_SPPIN_ENMUL (1 << 2) /* Multi Master Error detect */ +#define S3C2410_SPPIN_RESERVED (1 << 1) +#define S3C2410_SPPIN_KEEP (1 << 0) /* Master Out keep */ + +#define S3C2410_SPPRE (0x0C) +#define S3C2410_SPTDAT (0x10) +#define S3C2410_SPRDAT (0x14) + +#endif /* __ASM_ARCH_REGS_SPI_H */ diff --git a/arch/arm/plat-s5p/include/plat/regs-srom.h b/arch/arm/plat-samsung/include/plat/regs-srom.h index f121ab5..9b6729c 100644 --- a/arch/arm/plat-s5p/include/plat/regs-srom.h +++ b/arch/arm/plat-samsung/include/plat/regs-srom.h @@ -1,4 +1,4 @@ -/* linux/arch/arm/plat-s5p/include/plat/regs-srom.h +/* linux/arch/arm/plat-samsung/include/plat/regs-srom.h * * Copyright (c) 2010 Samsung Electronics Co., Ltd. * http://www.samsung.com @@ -10,8 +10,8 @@ * published by the Free Software Foundation. */ -#ifndef __ASM_PLAT_S5P_REGS_SROM_H -#define __ASM_PLAT_S5P_REGS_SROM_H __FILE__ +#ifndef __PLAT_SAMSUNG_REGS_SROM_H +#define __PLAT_SAMSUNG_REGS_SROM_H __FILE__ #include <mach/map.h> @@ -51,4 +51,4 @@ #define S5P_SROM_BCX__TCOS__SHIFT 24 #define S5P_SROM_BCX__TACS__SHIFT 28 -#endif /* __ASM_PLAT_S5P_REGS_SROM_H */ +#endif /* __PLAT_SAMSUNG_REGS_SROM_H */ diff --git a/arch/arm/plat-s3c24xx/include/plat/regs-udc.h b/arch/arm/plat-samsung/include/plat/regs-udc.h index f0dd4a4..4003d3d 100644 --- a/arch/arm/plat-s3c24xx/include/plat/regs-udc.h +++ b/arch/arm/plat-samsung/include/plat/regs-udc.h @@ -1,4 +1,4 @@ -/* arch/arm/mach-s3c2410/include/mach/regs-udc.h +/* arch/arm/plat-samsung/include/plat/regs-udc.h * * Copyright (C) 2004 Herbert Poetzl <herbert@13thfloor.at> * @@ -75,79 +75,77 @@ #define S3C2410_UDC_OUT_FIFO_CNT1_REG S3C2410_USBDREG(0x0198) #define S3C2410_UDC_OUT_FIFO_CNT2_REG S3C2410_USBDREG(0x019c) -#define S3C2410_UDC_FUNCADDR_UPDATE (1<<7) +#define S3C2410_UDC_FUNCADDR_UPDATE (1 << 7) -#define S3C2410_UDC_PWR_ISOUP (1<<7) // R/W -#define S3C2410_UDC_PWR_RESET (1<<3) // R -#define S3C2410_UDC_PWR_RESUME (1<<2) // R/W -#define S3C2410_UDC_PWR_SUSPEND (1<<1) // R -#define S3C2410_UDC_PWR_ENSUSPEND (1<<0) // R/W +#define S3C2410_UDC_PWR_ISOUP (1 << 7) /* R/W */ +#define S3C2410_UDC_PWR_RESET (1 << 3) /* R */ +#define S3C2410_UDC_PWR_RESUME (1 << 2) /* R/W */ +#define S3C2410_UDC_PWR_SUSPEND (1 << 1) /* R */ +#define S3C2410_UDC_PWR_ENSUSPEND (1 << 0) /* R/W */ -#define S3C2410_UDC_PWR_DEFAULT 0x00 +#define S3C2410_UDC_PWR_DEFAULT (0x00) -#define S3C2410_UDC_INT_EP4 (1<<4) // R/W (clear only) -#define S3C2410_UDC_INT_EP3 (1<<3) // R/W (clear only) -#define S3C2410_UDC_INT_EP2 (1<<2) // R/W (clear only) -#define S3C2410_UDC_INT_EP1 (1<<1) // R/W (clear only) -#define S3C2410_UDC_INT_EP0 (1<<0) // R/W (clear only) +#define S3C2410_UDC_INT_EP4 (1 << 4) /* R/W (clear only) */ +#define S3C2410_UDC_INT_EP3 (1 << 3) /* R/W (clear only) */ +#define S3C2410_UDC_INT_EP2 (1 << 2) /* R/W (clear only) */ +#define S3C2410_UDC_INT_EP1 (1 << 1) /* R/W (clear only) */ +#define S3C2410_UDC_INT_EP0 (1 << 0) /* R/W (clear only) */ -#define S3C2410_UDC_USBINT_RESET (1<<2) // R/W (clear only) -#define S3C2410_UDC_USBINT_RESUME (1<<1) // R/W (clear only) -#define S3C2410_UDC_USBINT_SUSPEND (1<<0) // R/W (clear only) +#define S3C2410_UDC_USBINT_RESET (1 << 2) /* R/W (clear only) */ +#define S3C2410_UDC_USBINT_RESUME (1 << 1) /* R/W (clear only) */ +#define S3C2410_UDC_USBINT_SUSPEND (1 << 0) /* R/W (clear only) */ -#define S3C2410_UDC_INTE_EP4 (1<<4) // R/W -#define S3C2410_UDC_INTE_EP3 (1<<3) // R/W -#define S3C2410_UDC_INTE_EP2 (1<<2) // R/W -#define S3C2410_UDC_INTE_EP1 (1<<1) // R/W -#define S3C2410_UDC_INTE_EP0 (1<<0) // R/W - -#define S3C2410_UDC_USBINTE_RESET (1<<2) // R/W -#define S3C2410_UDC_USBINTE_SUSPEND (1<<0) // R/W +#define S3C2410_UDC_INTE_EP4 (1 << 4) /* R/W */ +#define S3C2410_UDC_INTE_EP3 (1 << 3) /* R/W */ +#define S3C2410_UDC_INTE_EP2 (1 << 2) /* R/W */ +#define S3C2410_UDC_INTE_EP1 (1 << 1) /* R/W */ +#define S3C2410_UDC_INTE_EP0 (1 << 0) /* R/W */ +#define S3C2410_UDC_USBINTE_RESET (1 << 2) /* R/W */ +#define S3C2410_UDC_USBINTE_SUSPEND (1 << 0) /* R/W */ #define S3C2410_UDC_INDEX_EP0 (0x00) -#define S3C2410_UDC_INDEX_EP1 (0x01) // ?? -#define S3C2410_UDC_INDEX_EP2 (0x02) // ?? -#define S3C2410_UDC_INDEX_EP3 (0x03) // ?? -#define S3C2410_UDC_INDEX_EP4 (0x04) // ?? - -#define S3C2410_UDC_ICSR1_CLRDT (1<<6) // R/W -#define S3C2410_UDC_ICSR1_SENTSTL (1<<5) // R/W (clear only) -#define S3C2410_UDC_ICSR1_SENDSTL (1<<4) // R/W -#define S3C2410_UDC_ICSR1_FFLUSH (1<<3) // W (set only) -#define S3C2410_UDC_ICSR1_UNDRUN (1<<2) // R/W (clear only) -#define S3C2410_UDC_ICSR1_PKTRDY (1<<0) // R/W (set only) - -#define S3C2410_UDC_ICSR2_AUTOSET (1<<7) // R/W -#define S3C2410_UDC_ICSR2_ISO (1<<6) // R/W -#define S3C2410_UDC_ICSR2_MODEIN (1<<5) // R/W -#define S3C2410_UDC_ICSR2_DMAIEN (1<<4) // R/W - -#define S3C2410_UDC_OCSR1_CLRDT (1<<7) // R/W -#define S3C2410_UDC_OCSR1_SENTSTL (1<<6) // R/W (clear only) -#define S3C2410_UDC_OCSR1_SENDSTL (1<<5) // R/W -#define S3C2410_UDC_OCSR1_FFLUSH (1<<4) // R/W -#define S3C2410_UDC_OCSR1_DERROR (1<<3) // R -#define S3C2410_UDC_OCSR1_OVRRUN (1<<2) // R/W (clear only) -#define S3C2410_UDC_OCSR1_PKTRDY (1<<0) // R/W (clear only) - -#define S3C2410_UDC_OCSR2_AUTOCLR (1<<7) // R/W -#define S3C2410_UDC_OCSR2_ISO (1<<6) // R/W -#define S3C2410_UDC_OCSR2_DMAIEN (1<<5) // R/W - -#define S3C2410_UDC_EP0_CSR_OPKRDY (1<<0) -#define S3C2410_UDC_EP0_CSR_IPKRDY (1<<1) -#define S3C2410_UDC_EP0_CSR_SENTSTL (1<<2) -#define S3C2410_UDC_EP0_CSR_DE (1<<3) -#define S3C2410_UDC_EP0_CSR_SE (1<<4) -#define S3C2410_UDC_EP0_CSR_SENDSTL (1<<5) -#define S3C2410_UDC_EP0_CSR_SOPKTRDY (1<<6) -#define S3C2410_UDC_EP0_CSR_SSE (1<<7) - -#define S3C2410_UDC_MAXP_8 (1<<0) -#define S3C2410_UDC_MAXP_16 (1<<1) -#define S3C2410_UDC_MAXP_32 (1<<2) -#define S3C2410_UDC_MAXP_64 (1<<3) - +#define S3C2410_UDC_INDEX_EP1 (0x01) +#define S3C2410_UDC_INDEX_EP2 (0x02) +#define S3C2410_UDC_INDEX_EP3 (0x03) +#define S3C2410_UDC_INDEX_EP4 (0x04) + +#define S3C2410_UDC_ICSR1_CLRDT (1 << 6) /* R/W */ +#define S3C2410_UDC_ICSR1_SENTSTL (1 << 5) /* R/W (clear only) */ +#define S3C2410_UDC_ICSR1_SENDSTL (1 << 4) /* R/W */ +#define S3C2410_UDC_ICSR1_FFLUSH (1 << 3) /* W (set only) */ +#define S3C2410_UDC_ICSR1_UNDRUN (1 << 2) /* R/W (clear only) */ +#define S3C2410_UDC_ICSR1_PKTRDY (1 << 0) /* R/W (set only) */ + +#define S3C2410_UDC_ICSR2_AUTOSET (1 << 7) /* R/W */ +#define S3C2410_UDC_ICSR2_ISO (1 << 6) /* R/W */ +#define S3C2410_UDC_ICSR2_MODEIN (1 << 5) /* R/W */ +#define S3C2410_UDC_ICSR2_DMAIEN (1 << 4) /* R/W */ + +#define S3C2410_UDC_OCSR1_CLRDT (1 << 7) /* R/W */ +#define S3C2410_UDC_OCSR1_SENTSTL (1 << 6) /* R/W (clear only) */ +#define S3C2410_UDC_OCSR1_SENDSTL (1 << 5) /* R/W */ +#define S3C2410_UDC_OCSR1_FFLUSH (1 << 4) /* R/W */ +#define S3C2410_UDC_OCSR1_DERROR (1 << 3) /* R */ +#define S3C2410_UDC_OCSR1_OVRRUN (1 << 2) /* R/W (clear only) */ +#define S3C2410_UDC_OCSR1_PKTRDY (1 << 0) /* R/W (clear only) */ + +#define S3C2410_UDC_OCSR2_AUTOCLR (1 << 7) /* R/W */ +#define S3C2410_UDC_OCSR2_ISO (1 << 6) /* R/W */ +#define S3C2410_UDC_OCSR2_DMAIEN (1 << 5) /* R/W */ + +#define S3C2410_UDC_EP0_CSR_OPKRDY (1 << 0) +#define S3C2410_UDC_EP0_CSR_IPKRDY (1 << 1) +#define S3C2410_UDC_EP0_CSR_SENTSTL (1 << 2) +#define S3C2410_UDC_EP0_CSR_DE (1 << 3) +#define S3C2410_UDC_EP0_CSR_SE (1 << 4) +#define S3C2410_UDC_EP0_CSR_SENDSTL (1 << 5) +#define S3C2410_UDC_EP0_CSR_SOPKTRDY (1 << 6) +#define S3C2410_UDC_EP0_CSR_SSE (1 << 7) + +#define S3C2410_UDC_MAXP_8 (1 << 0) +#define S3C2410_UDC_MAXP_16 (1 << 1) +#define S3C2410_UDC_MAXP_32 (1 << 2) +#define S3C2410_UDC_MAXP_64 (1 << 3) #endif diff --git a/arch/arm/plat-s5p/include/plat/reset.h b/arch/arm/plat-samsung/include/plat/reset.h index 335e978..32ca517 100644 --- a/arch/arm/plat-s5p/include/plat/reset.h +++ b/arch/arm/plat-samsung/include/plat/reset.h @@ -1,4 +1,4 @@ -/* linux/arch/arm/plat-s5p/include/plat/reset.h +/* linux/arch/arm/plat-samsung/include/plat/reset.h * * Copyright (c) 2010 Samsung Electronics Co., Ltd. * http://www.samsung.com/ @@ -8,9 +8,9 @@ * published by the Free Software Foundation. */ -#ifndef __ASM_PLAT_S5P_RESET_H -#define __ASM_PLAT_S5P_RESET_H __FILE__ +#ifndef __PLAT_SAMSUNG_RESET_H +#define __PLAT_SAMSUNG_RESET_H __FILE__ extern void (*s5p_reset_hook)(void); -#endif /* __ASM_PLAT_S5P_RESET_H */ +#endif /* __PLAT_SAMSUNG_RESET_H */ diff --git a/arch/arm/plat-samsung/include/plat/s3c-pl330-pdata.h b/arch/arm/plat-samsung/include/plat/s3c-pl330-pdata.h deleted file mode 100644 index bf5e2a9..0000000 --- a/arch/arm/plat-samsung/include/plat/s3c-pl330-pdata.h +++ /dev/null @@ -1,32 +0,0 @@ -/* linux/arch/arm/plat-samsung/include/plat/s3c-pl330-pdata.h - * - * Copyright (C) 2010 Samsung Electronics Co. Ltd. - * Jaswinder Singh <jassi.brar@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#ifndef __S3C_PL330_PDATA_H -#define __S3C_PL330_PDATA_H - -#include <plat/s3c-dma-pl330.h> - -/* - * Every PL330 DMAC has max 32 peripheral interfaces, - * of which some may be not be really used in your - * DMAC's configuration. - * Populate this array of 32 peri i/fs with relevant - * channel IDs for used peri i/f and DMACH_MAX for - * those unused. - * - * The platforms just need to provide this info - * to the S3C DMA API driver for PL330. - */ -struct s3c_pl330_platdata { - enum dma_ch peri[32]; -}; - -#endif /* __S3C_PL330_PDATA_H */ diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2410.h b/arch/arm/plat-samsung/include/plat/s3c2410.h index 82ab4aad..3986497 100644 --- a/arch/arm/plat-s3c24xx/include/plat/s3c2410.h +++ b/arch/arm/plat-samsung/include/plat/s3c2410.h @@ -1,4 +1,4 @@ -/* linux/include/asm-arm/plat-s3c24xx/s3c2410.h +/* linux/arch/arm/plat-samsung/include/plat/s3c2410.h * * Copyright (c) 2004 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2412.h b/arch/arm/plat-samsung/include/plat/s3c2412.h index bb15d3b..5bcfd14 100644 --- a/arch/arm/plat-s3c24xx/include/plat/s3c2412.h +++ b/arch/arm/plat-samsung/include/plat/s3c2412.h @@ -1,4 +1,4 @@ -/* linux/include/asm-arm/plat-s3c24xx/s3c2412.h +/* linux/arch/arm/plat-samsung/include/plat/s3c2412.h * * Copyright (c) 2006 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2416.h b/arch/arm/plat-samsung/include/plat/s3c2416.h index dc3c090..a764f85 100644 --- a/arch/arm/plat-s3c24xx/include/plat/s3c2416.h +++ b/arch/arm/plat-samsung/include/plat/s3c2416.h @@ -1,4 +1,4 @@ -/* linux/include/asm-arm/plat-s3c24xx/s3c2443.h +/* linux/arch/arm/plat-samsung/include/plat/s3c2416.h * * Copyright (c) 2009 Yauhen Kharuzhy <jekhor@gmail.com> * diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2443.h b/arch/arm/plat-samsung/include/plat/s3c2443.h index a19715f..4b2ac9a 100644 --- a/arch/arm/plat-s3c24xx/include/plat/s3c2443.h +++ b/arch/arm/plat-samsung/include/plat/s3c2443.h @@ -1,4 +1,4 @@ -/* linux/include/asm-arm/plat-s3c24xx/s3c2443.h +/* linux/arch/arm/plat-samsung/include/plat/s3c2443.h * * Copyright (c) 2004-2005 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c244x.h b/arch/arm/plat-samsung/include/plat/s3c244x.h index 89e8d0a..ea0c961 100644 --- a/arch/arm/plat-s3c24xx/include/plat/s3c244x.h +++ b/arch/arm/plat-samsung/include/plat/s3c244x.h @@ -1,4 +1,4 @@ -/* linux/arch/arm/plat-s3c24xx/include/plat/s3c244x.h +/* linux/arch/arm/plat-samsung/include/plat/s3c244x.h * * Copyright (c) 2004-2005 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> diff --git a/arch/arm/mach-s3c64xx/include/mach/s3c6400.h b/arch/arm/plat-samsung/include/plat/s3c6400.h index f86958d..37d428a 100644 --- a/arch/arm/mach-s3c64xx/include/mach/s3c6400.h +++ b/arch/arm/plat-samsung/include/plat/s3c6400.h @@ -1,4 +1,4 @@ -/* arch/arm/mach-s3c64xx/include/macht/s3c6400.h +/* linux/arch/arm/plat-samsung/include/plat/s3c6400.h * * Copyright 2008 Openmoko, Inc. * Copyright 2008 Simtec Electronics diff --git a/arch/arm/mach-s3c64xx/include/mach/s3c6410.h b/arch/arm/plat-samsung/include/plat/s3c6410.h index 24f1141..20a6675 100644 --- a/arch/arm/mach-s3c64xx/include/mach/s3c6410.h +++ b/arch/arm/plat-samsung/include/plat/s3c6410.h @@ -1,4 +1,4 @@ -/* arch/arm/mach-s3c64xx/include/mach/s3c6410.h +/* linux/arch/arm/plat-samsung/include/plat/s3c6410.h * * Copyright 2008 Openmoko, Inc. * Copyright 2008 Simtec Electronics diff --git a/arch/arm/plat-s5p/include/plat/s5p-clock.h b/arch/arm/plat-samsung/include/plat/s5p-clock.h index 769b5bd..984bf9e 100644 --- a/arch/arm/plat-s5p/include/plat/s5p-clock.h +++ b/arch/arm/plat-samsung/include/plat/s5p-clock.h @@ -1,4 +1,4 @@ -/* linux/arch/arm/plat-s5p/include/plat/s5p-clock.h +/* linux/arch/arm/plat-samsung/include/plat/s5p-clock.h * * Copyright (c) 2009-2010 Samsung Electronics Co., Ltd. * http://www.samsung.com diff --git a/arch/arm/plat-s5p/include/plat/s5p-time.h b/arch/arm/plat-samsung/include/plat/s5p-time.h index 575e881..3a70aeb 100644 --- a/arch/arm/plat-s5p/include/plat/s5p-time.h +++ b/arch/arm/plat-samsung/include/plat/s5p-time.h @@ -1,4 +1,4 @@ -/* linux/arch/arm/plat-s5p/include/plat/s5p-time.h +/* linux/arch/arm/plat-samsung/include/plat/s5p-time.h * * Copyright 2011 Samsung Electronics Co., Ltd. * http://www.samsung.com/ diff --git a/arch/arm/plat-s5p/include/plat/s5p6440.h b/arch/arm/plat-samsung/include/plat/s5p6440.h index 528585d..bf85ebb 100644 --- a/arch/arm/plat-s5p/include/plat/s5p6440.h +++ b/arch/arm/plat-samsung/include/plat/s5p6440.h @@ -1,4 +1,4 @@ -/* arch/arm/plat-s5p/include/plat/s5p6440.h +/* linux/arch/arm/plat-samsung/include/plat/s5p6440.h * * Copyright (c) 2009 Samsung Electronics Co., Ltd. * http://www.samsung.com/ diff --git a/arch/arm/plat-s5p/include/plat/s5p6450.h b/arch/arm/plat-samsung/include/plat/s5p6450.h index 640a41c..da25f9a 100644 --- a/arch/arm/plat-s5p/include/plat/s5p6450.h +++ b/arch/arm/plat-samsung/include/plat/s5p6450.h @@ -1,4 +1,4 @@ -/* arch/arm/plat-s5p/include/plat/s5p6450.h +/* linux/arch/arm/plat-samsung/include/plat/s5p6450.h * * Copyright (c) 2010 Samsung Electronics Co., Ltd. * http://www.samsung.com diff --git a/arch/arm/plat-s5p/include/plat/s5pc100.h b/arch/arm/plat-samsung/include/plat/s5pc100.h index 5f6099d..9a21aea 100644 --- a/arch/arm/plat-s5p/include/plat/s5pc100.h +++ b/arch/arm/plat-samsung/include/plat/s5pc100.h @@ -1,4 +1,4 @@ -/* arch/arm/plat-s5p/include/plat/s5pc100.h +/* linux/arch/arm/plat-samsung/include/plat/s5pc100.h * * Copyright (c) 2010 Samsung Electronics Co., Ltd. * http://www.samsung.com/ diff --git a/arch/arm/plat-s5p/include/plat/s5pv210.h b/arch/arm/plat-samsung/include/plat/s5pv210.h index 6c93a0c..b4bc6be7 100644 --- a/arch/arm/plat-s5p/include/plat/s5pv210.h +++ b/arch/arm/plat-samsung/include/plat/s5pv210.h @@ -1,4 +1,4 @@ -/* linux/arch/arm/plat-s5p/include/plat/s5pv210.h +/* linux/arch/arm/plat-samsung/include/plat/s5pv210.h * * Copyright (c) 2010 Samsung Electronics Co., Ltd. * http://www.samsung.com/ diff --git a/arch/arm/plat-samsung/include/plat/sdhci.h b/arch/arm/plat-samsung/include/plat/sdhci.h index 058e096..e7b3c75 100644 --- a/arch/arm/plat-samsung/include/plat/sdhci.h +++ b/arch/arm/plat-samsung/include/plat/sdhci.h @@ -55,10 +55,6 @@ enum clk_types { * cd_type == S3C_SDHCI_CD_GPIO * @ext_cd_gpio_invert: invert values for external CD gpio line * @cfg_gpio: Configure the GPIO for a specific card bit-width - * @cfg_card: Configure the interface for a specific card and speed. This - * is necessary the controllers and/or GPIO blocks require the - * changing of driver-strength and other controls dependent on - * the card and speed of operation. * * Initialisation data specific to either the machine or the platform * for the device driver to use or call-back when configuring gpio or @@ -80,12 +76,15 @@ struct s3c_sdhci_platdata { int state)); void (*cfg_gpio)(struct platform_device *dev, int width); - void (*cfg_card)(struct platform_device *dev, - void __iomem *regbase, - struct mmc_ios *ios, - struct mmc_card *card); }; +/* s3c_sdhci_set_platdata() - common helper for setting SDHCI platform data + * @pd: The default platform data for this device. + * @set: Pointer to the platform data to fill in. + */ +extern void s3c_sdhci_set_platdata(struct s3c_sdhci_platdata *pd, + struct s3c_sdhci_platdata *set); + /** * s3c_sdhci0_set_platdata - Set platform data for S3C SDHCI device. * @pd: Platform data to register to device. @@ -132,17 +131,11 @@ extern void exynos4_setup_sdhci3_cfg_gpio(struct platform_device *, int w); #ifdef CONFIG_S3C2416_SETUP_SDHCI extern char *s3c2416_hsmmc_clksrcs[4]; -extern void s3c2416_setup_sdhci_cfg_card(struct platform_device *dev, - void __iomem *r, - struct mmc_ios *ios, - struct mmc_card *card); - static inline void s3c2416_default_sdhci0(void) { #ifdef CONFIG_S3C_DEV_HSMMC s3c_hsmmc0_def_platdata.clocks = s3c2416_hsmmc_clksrcs; s3c_hsmmc0_def_platdata.cfg_gpio = s3c2416_setup_sdhci0_cfg_gpio; - s3c_hsmmc0_def_platdata.cfg_card = s3c2416_setup_sdhci_cfg_card; #endif /* CONFIG_S3C_DEV_HSMMC */ } @@ -151,7 +144,6 @@ static inline void s3c2416_default_sdhci1(void) #ifdef CONFIG_S3C_DEV_HSMMC1 s3c_hsmmc1_def_platdata.clocks = s3c2416_hsmmc_clksrcs; s3c_hsmmc1_def_platdata.cfg_gpio = s3c2416_setup_sdhci1_cfg_gpio; - s3c_hsmmc1_def_platdata.cfg_card = s3c2416_setup_sdhci_cfg_card; #endif /* CONFIG_S3C_DEV_HSMMC1 */ } @@ -165,17 +157,11 @@ static inline void s3c2416_default_sdhci1(void) { } #ifdef CONFIG_S3C64XX_SETUP_SDHCI extern char *s3c64xx_hsmmc_clksrcs[4]; -extern void s3c6400_setup_sdhci_cfg_card(struct platform_device *dev, - void __iomem *r, - struct mmc_ios *ios, - struct mmc_card *card); - static inline void s3c6400_default_sdhci0(void) { #ifdef CONFIG_S3C_DEV_HSMMC s3c_hsmmc0_def_platdata.clocks = s3c64xx_hsmmc_clksrcs; s3c_hsmmc0_def_platdata.cfg_gpio = s3c64xx_setup_sdhci0_cfg_gpio; - s3c_hsmmc0_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card; #endif } @@ -184,7 +170,6 @@ static inline void s3c6400_default_sdhci1(void) #ifdef CONFIG_S3C_DEV_HSMMC1 s3c_hsmmc1_def_platdata.clocks = s3c64xx_hsmmc_clksrcs; s3c_hsmmc1_def_platdata.cfg_gpio = s3c64xx_setup_sdhci1_cfg_gpio; - s3c_hsmmc1_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card; #endif } @@ -193,21 +178,14 @@ static inline void s3c6400_default_sdhci2(void) #ifdef CONFIG_S3C_DEV_HSMMC2 s3c_hsmmc2_def_platdata.clocks = s3c64xx_hsmmc_clksrcs; s3c_hsmmc2_def_platdata.cfg_gpio = s3c64xx_setup_sdhci2_cfg_gpio; - s3c_hsmmc2_def_platdata.cfg_card = s3c6400_setup_sdhci_cfg_card; #endif } -extern void s3c6410_setup_sdhci_cfg_card(struct platform_device *dev, - void __iomem *r, - struct mmc_ios *ios, - struct mmc_card *card); - static inline void s3c6410_default_sdhci0(void) { #ifdef CONFIG_S3C_DEV_HSMMC s3c_hsmmc0_def_platdata.clocks = s3c64xx_hsmmc_clksrcs; s3c_hsmmc0_def_platdata.cfg_gpio = s3c64xx_setup_sdhci0_cfg_gpio; - s3c_hsmmc0_def_platdata.cfg_card = s3c6410_setup_sdhci_cfg_card; #endif } @@ -216,7 +194,6 @@ static inline void s3c6410_default_sdhci1(void) #ifdef CONFIG_S3C_DEV_HSMMC1 s3c_hsmmc1_def_platdata.clocks = s3c64xx_hsmmc_clksrcs; s3c_hsmmc1_def_platdata.cfg_gpio = s3c64xx_setup_sdhci1_cfg_gpio; - s3c_hsmmc1_def_platdata.cfg_card = s3c6410_setup_sdhci_cfg_card; #endif } @@ -225,7 +202,6 @@ static inline void s3c6410_default_sdhci2(void) #ifdef CONFIG_S3C_DEV_HSMMC2 s3c_hsmmc2_def_platdata.clocks = s3c64xx_hsmmc_clksrcs; s3c_hsmmc2_def_platdata.cfg_gpio = s3c64xx_setup_sdhci2_cfg_gpio; - s3c_hsmmc2_def_platdata.cfg_card = s3c6410_setup_sdhci_cfg_card; #endif } @@ -244,17 +220,11 @@ static inline void s3c6400_default_sdhci2(void) { } #ifdef CONFIG_S5PC100_SETUP_SDHCI extern char *s5pc100_hsmmc_clksrcs[4]; -extern void s5pc100_setup_sdhci0_cfg_card(struct platform_device *dev, - void __iomem *r, - struct mmc_ios *ios, - struct mmc_card *card); - static inline void s5pc100_default_sdhci0(void) { #ifdef CONFIG_S3C_DEV_HSMMC s3c_hsmmc0_def_platdata.clocks = s5pc100_hsmmc_clksrcs; s3c_hsmmc0_def_platdata.cfg_gpio = s5pc100_setup_sdhci0_cfg_gpio; - s3c_hsmmc0_def_platdata.cfg_card = s5pc100_setup_sdhci0_cfg_card; #endif } @@ -263,7 +233,6 @@ static inline void s5pc100_default_sdhci1(void) #ifdef CONFIG_S3C_DEV_HSMMC1 s3c_hsmmc1_def_platdata.clocks = s5pc100_hsmmc_clksrcs; s3c_hsmmc1_def_platdata.cfg_gpio = s5pc100_setup_sdhci1_cfg_gpio; - s3c_hsmmc1_def_platdata.cfg_card = s5pc100_setup_sdhci0_cfg_card; #endif } @@ -272,7 +241,6 @@ static inline void s5pc100_default_sdhci2(void) #ifdef CONFIG_S3C_DEV_HSMMC2 s3c_hsmmc2_def_platdata.clocks = s5pc100_hsmmc_clksrcs; s3c_hsmmc2_def_platdata.cfg_gpio = s5pc100_setup_sdhci2_cfg_gpio; - s3c_hsmmc2_def_platdata.cfg_card = s5pc100_setup_sdhci0_cfg_card; #endif } @@ -288,17 +256,11 @@ static inline void s5pc100_default_sdhci2(void) { } #ifdef CONFIG_S5PV210_SETUP_SDHCI extern char *s5pv210_hsmmc_clksrcs[4]; -extern void s5pv210_setup_sdhci_cfg_card(struct platform_device *dev, - void __iomem *r, - struct mmc_ios *ios, - struct mmc_card *card); - static inline void s5pv210_default_sdhci0(void) { #ifdef CONFIG_S3C_DEV_HSMMC s3c_hsmmc0_def_platdata.clocks = s5pv210_hsmmc_clksrcs; s3c_hsmmc0_def_platdata.cfg_gpio = s5pv210_setup_sdhci0_cfg_gpio; - s3c_hsmmc0_def_platdata.cfg_card = s5pv210_setup_sdhci_cfg_card; #endif } @@ -307,7 +269,6 @@ static inline void s5pv210_default_sdhci1(void) #ifdef CONFIG_S3C_DEV_HSMMC1 s3c_hsmmc1_def_platdata.clocks = s5pv210_hsmmc_clksrcs; s3c_hsmmc1_def_platdata.cfg_gpio = s5pv210_setup_sdhci1_cfg_gpio; - s3c_hsmmc1_def_platdata.cfg_card = s5pv210_setup_sdhci_cfg_card; #endif } @@ -316,7 +277,6 @@ static inline void s5pv210_default_sdhci2(void) #ifdef CONFIG_S3C_DEV_HSMMC2 s3c_hsmmc2_def_platdata.clocks = s5pv210_hsmmc_clksrcs; s3c_hsmmc2_def_platdata.cfg_gpio = s5pv210_setup_sdhci2_cfg_gpio; - s3c_hsmmc2_def_platdata.cfg_card = s5pv210_setup_sdhci_cfg_card; #endif } @@ -325,7 +285,6 @@ static inline void s5pv210_default_sdhci3(void) #ifdef CONFIG_S3C_DEV_HSMMC3 s3c_hsmmc3_def_platdata.clocks = s5pv210_hsmmc_clksrcs; s3c_hsmmc3_def_platdata.cfg_gpio = s5pv210_setup_sdhci3_cfg_gpio; - s3c_hsmmc3_def_platdata.cfg_card = s5pv210_setup_sdhci_cfg_card; #endif } @@ -341,17 +300,11 @@ static inline void s5pv210_default_sdhci3(void) { } #ifdef CONFIG_EXYNOS4_SETUP_SDHCI extern char *exynos4_hsmmc_clksrcs[4]; -extern void exynos4_setup_sdhci_cfg_card(struct platform_device *dev, - void __iomem *r, - struct mmc_ios *ios, - struct mmc_card *card); - static inline void exynos4_default_sdhci0(void) { #ifdef CONFIG_S3C_DEV_HSMMC s3c_hsmmc0_def_platdata.clocks = exynos4_hsmmc_clksrcs; s3c_hsmmc0_def_platdata.cfg_gpio = exynos4_setup_sdhci0_cfg_gpio; - s3c_hsmmc0_def_platdata.cfg_card = exynos4_setup_sdhci_cfg_card; #endif } @@ -360,7 +313,6 @@ static inline void exynos4_default_sdhci1(void) #ifdef CONFIG_S3C_DEV_HSMMC1 s3c_hsmmc1_def_platdata.clocks = exynos4_hsmmc_clksrcs; s3c_hsmmc1_def_platdata.cfg_gpio = exynos4_setup_sdhci1_cfg_gpio; - s3c_hsmmc1_def_platdata.cfg_card = exynos4_setup_sdhci_cfg_card; #endif } @@ -369,7 +321,6 @@ static inline void exynos4_default_sdhci2(void) #ifdef CONFIG_S3C_DEV_HSMMC2 s3c_hsmmc2_def_platdata.clocks = exynos4_hsmmc_clksrcs; s3c_hsmmc2_def_platdata.cfg_gpio = exynos4_setup_sdhci2_cfg_gpio; - s3c_hsmmc2_def_platdata.cfg_card = exynos4_setup_sdhci_cfg_card; #endif } @@ -378,7 +329,6 @@ static inline void exynos4_default_sdhci3(void) #ifdef CONFIG_S3C_DEV_HSMMC3 s3c_hsmmc3_def_platdata.clocks = exynos4_hsmmc_clksrcs; s3c_hsmmc3_def_platdata.cfg_gpio = exynos4_setup_sdhci3_cfg_gpio; - s3c_hsmmc3_def_platdata.cfg_card = exynos4_setup_sdhci_cfg_card; #endif } diff --git a/arch/arm/plat-s5p/include/plat/sysmmu.h b/arch/arm/plat-samsung/include/plat/sysmmu.h index bf5283c..5fe8ee0 100644 --- a/arch/arm/plat-s5p/include/plat/sysmmu.h +++ b/arch/arm/plat-samsung/include/plat/sysmmu.h @@ -1,4 +1,4 @@ -/* linux/arch/arm/plat-s5p/include/plat/sysmmu.h +/* linux/arch/arm/plat-samsung/include/plat/sysmmu.h * * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. * http://www.samsung.com @@ -10,8 +10,8 @@ * published by the Free Software Foundation. */ -#ifndef __ASM__PLAT_SYSMMU_H -#define __ASM__PLAT_SYSMMU_H __FILE__ +#ifndef __PLAT_SAMSUNG_SYSMMU_H +#define __PLAT_SAMSUNG_SYSMMU_H __FILE__ enum S5P_SYSMMU_INTERRUPT_TYPE { SYSMMU_PAGEFAULT, diff --git a/arch/arm/plat-s5p/include/plat/system-reset.h b/arch/arm/plat-samsung/include/plat/system-reset.h index f307f34..a448e990 100644 --- a/arch/arm/plat-s5p/include/plat/system-reset.h +++ b/arch/arm/plat-samsung/include/plat/system-reset.h @@ -1,4 +1,4 @@ -/* linux/arch/arm/plat-s5p/include/plat/system-reset.h +/* linux/arch/arm/plat-samsung/include/plat/system-reset.h * * Copyright (c) 2010 Samsung Electronics Co., Ltd. * http://www.samsung.com diff --git a/arch/arm/plat-samsung/include/plat/tv-core.h b/arch/arm/plat-samsung/include/plat/tv-core.h new file mode 100644 index 0000000..3bc34f3c --- /dev/null +++ b/arch/arm/plat-samsung/include/plat/tv-core.h @@ -0,0 +1,44 @@ +/* + * arch/arm/plat-samsung/include/plat/tv.h + * + * Copyright 2011 Samsung Electronics Co., Ltd. + * Tomasz Stanislawski <t.stanislaws@samsung.com> + * + * Samsung TV driver core functions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __SAMSUNG_PLAT_TV_H +#define __SAMSUNG_PLAT_TV_H __FILE__ + +/* + * These functions are only for use with the core support code, such as + * the CPU-specific initialization code. + */ + +/* Re-define device name to differentiate the subsystem in various SoCs. */ +static inline void s5p_hdmi_setname(char *name) +{ +#ifdef CONFIG_S5P_DEV_TV + s5p_device_hdmi.name = name; +#endif +} + +static inline void s5p_mixer_setname(char *name) +{ +#ifdef CONFIG_S5P_DEV_TV + s5p_device_mixer.name = name; +#endif +} + +static inline void s5p_sdo_setname(char *name) +{ +#ifdef CONFIG_S5P_DEV_TV + s5p_device_sdo.name = name; +#endif +} + +#endif /* __SAMSUNG_PLAT_TV_H */ diff --git a/arch/arm/plat-s3c24xx/include/plat/udc.h b/arch/arm/plat-samsung/include/plat/udc.h index f6388424..8c22d58 100644 --- a/arch/arm/plat-s3c24xx/include/plat/udc.h +++ b/arch/arm/plat-samsung/include/plat/udc.h @@ -1,4 +1,4 @@ -/* arch/arm/mach-s3c2410/include/mach/udc.h +/* arch/arm/plat-samsung/include/plat/udc.h * * Copyright (c) 2005 Arnaud Patard <arnaud.patard@rtp-net.org> * @@ -26,7 +26,7 @@ enum s3c2410_udc_cmd_e { struct s3c2410_udc_mach_info { void (*udc_command)(enum s3c2410_udc_cmd_e); - void (*vbus_draw)(unsigned int ma); + void (*vbus_draw)(unsigned int ma); unsigned int pullup_pin; unsigned int pullup_pin_inverted; diff --git a/arch/arm/plat-s5p/include/plat/usb-phy.h b/arch/arm/plat-samsung/include/plat/usb-phy.h index 6dd6bcf..959bcdb 100644 --- a/arch/arm/plat-s5p/include/plat/usb-phy.h +++ b/arch/arm/plat-samsung/include/plat/usb-phy.h @@ -8,8 +8,8 @@ * option) any later version. */ -#ifndef __PLAT_S5P_USB_PHY_H -#define __PLAT_S5P_USB_PHY_H +#ifndef __PLAT_SAMSUNG_USB_PHY_H +#define __PLAT_SAMSUNG_USB_PHY_H __FILE__ enum s5p_usb_phy_type { S5P_USB_PHY_DEVICE, @@ -19,4 +19,4 @@ enum s5p_usb_phy_type { extern int s5p_usb_phy_init(struct platform_device *pdev, int type); extern int s5p_usb_phy_exit(struct platform_device *pdev, int type); -#endif /* __PLAT_S5P_REGS_USB_PHY_H */ +#endif /* __PLAT_SAMSUNG_USB_PHY_H */ diff --git a/arch/arm/plat-samsung/platformdata.c b/arch/arm/plat-samsung/platformdata.c index 7cf2e1e..4c9a207 100644 --- a/arch/arm/plat-samsung/platformdata.c +++ b/arch/arm/plat-samsung/platformdata.c @@ -14,6 +14,7 @@ #include <linux/platform_device.h> #include <plat/devs.h> +#include <plat/sdhci.h> void __init *s3c_set_platdata(void *pd, size_t pdsize, struct platform_device *pdev) @@ -35,3 +36,22 @@ void __init *s3c_set_platdata(void *pd, size_t pdsize, pdev->dev.platform_data = npd; return npd; } + +void s3c_sdhci_set_platdata(struct s3c_sdhci_platdata *pd, + struct s3c_sdhci_platdata *set) +{ + set->cd_type = pd->cd_type; + set->ext_cd_init = pd->ext_cd_init; + set->ext_cd_cleanup = pd->ext_cd_cleanup; + set->ext_cd_gpio = pd->ext_cd_gpio; + set->ext_cd_gpio_invert = pd->ext_cd_gpio_invert; + + if (pd->max_width) + set->max_width = pd->max_width; + if (pd->cfg_gpio) + set->cfg_gpio = pd->cfg_gpio; + if (pd->host_caps) + set->host_caps |= pd->host_caps; + if (pd->clk_type) + set->clk_type = pd->clk_type; +} diff --git a/arch/arm/plat-samsung/pm-gpio.c b/arch/arm/plat-samsung/pm-gpio.c index 9652820..4be016e 100644 --- a/arch/arm/plat-samsung/pm-gpio.c +++ b/arch/arm/plat-samsung/pm-gpio.c @@ -28,13 +28,13 @@ #define OFFS_DAT (0x04) #define OFFS_UP (0x08) -static void s3c_gpio_pm_1bit_save(struct s3c_gpio_chip *chip) +static void samsung_gpio_pm_1bit_save(struct samsung_gpio_chip *chip) { chip->pm_save[0] = __raw_readl(chip->base + OFFS_CON); chip->pm_save[1] = __raw_readl(chip->base + OFFS_DAT); } -static void s3c_gpio_pm_1bit_resume(struct s3c_gpio_chip *chip) +static void samsung_gpio_pm_1bit_resume(struct samsung_gpio_chip *chip) { void __iomem *base = chip->base; u32 old_gpcon = __raw_readl(base + OFFS_CON); @@ -60,12 +60,12 @@ static void s3c_gpio_pm_1bit_resume(struct s3c_gpio_chip *chip) chip->chip.label, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat); } -struct s3c_gpio_pm s3c_gpio_pm_1bit = { - .save = s3c_gpio_pm_1bit_save, - .resume = s3c_gpio_pm_1bit_resume, +struct samsung_gpio_pm samsung_gpio_pm_1bit = { + .save = samsung_gpio_pm_1bit_save, + .resume = samsung_gpio_pm_1bit_resume, }; -static void s3c_gpio_pm_2bit_save(struct s3c_gpio_chip *chip) +static void samsung_gpio_pm_2bit_save(struct samsung_gpio_chip *chip) { chip->pm_save[0] = __raw_readl(chip->base + OFFS_CON); chip->pm_save[1] = __raw_readl(chip->base + OFFS_DAT); @@ -95,7 +95,7 @@ static inline int is_out(unsigned long con) } /** - * s3c_gpio_pm_2bit_resume() - restore the given GPIO bank + * samsung_gpio_pm_2bit_resume() - restore the given GPIO bank * @chip: The chip information to resume. * * Restore one of the GPIO banks that was saved during suspend. This is @@ -121,7 +121,7 @@ static inline int is_out(unsigned long con) * [1] this assumes that writing to a pin DAT whilst in SFN will set the * state for when it is next output. */ -static void s3c_gpio_pm_2bit_resume(struct s3c_gpio_chip *chip) +static void samsung_gpio_pm_2bit_resume(struct samsung_gpio_chip *chip) { void __iomem *base = chip->base; u32 old_gpcon = __raw_readl(base + OFFS_CON); @@ -187,13 +187,13 @@ static void s3c_gpio_pm_2bit_resume(struct s3c_gpio_chip *chip) chip->chip.label, old_gpcon, gps_gpcon, old_gpdat, gps_gpdat); } -struct s3c_gpio_pm s3c_gpio_pm_2bit = { - .save = s3c_gpio_pm_2bit_save, - .resume = s3c_gpio_pm_2bit_resume, +struct samsung_gpio_pm samsung_gpio_pm_2bit = { + .save = samsung_gpio_pm_2bit_save, + .resume = samsung_gpio_pm_2bit_resume, }; #if defined(CONFIG_ARCH_S3C64XX) || defined(CONFIG_PLAT_S5P) -static void s3c_gpio_pm_4bit_save(struct s3c_gpio_chip *chip) +static void samsung_gpio_pm_4bit_save(struct samsung_gpio_chip *chip) { chip->pm_save[1] = __raw_readl(chip->base + OFFS_CON); chip->pm_save[2] = __raw_readl(chip->base + OFFS_DAT); @@ -203,7 +203,7 @@ static void s3c_gpio_pm_4bit_save(struct s3c_gpio_chip *chip) chip->pm_save[0] = __raw_readl(chip->base - 4); } -static u32 s3c_gpio_pm_4bit_mask(u32 old_gpcon, u32 gps_gpcon) +static u32 samsung_gpio_pm_4bit_mask(u32 old_gpcon, u32 gps_gpcon) { u32 old, new, mask; u32 change_mask = 0x0; @@ -242,14 +242,14 @@ static u32 s3c_gpio_pm_4bit_mask(u32 old_gpcon, u32 gps_gpcon) return change_mask; } -static void s3c_gpio_pm_4bit_con(struct s3c_gpio_chip *chip, int index) +static void samsung_gpio_pm_4bit_con(struct samsung_gpio_chip *chip, int index) { void __iomem *con = chip->base + (index * 4); u32 old_gpcon = __raw_readl(con); u32 gps_gpcon = chip->pm_save[index + 1]; u32 gpcon, mask; - mask = s3c_gpio_pm_4bit_mask(old_gpcon, gps_gpcon); + mask = samsung_gpio_pm_4bit_mask(old_gpcon, gps_gpcon); gpcon = old_gpcon & ~mask; gpcon |= gps_gpcon & mask; @@ -257,7 +257,7 @@ static void s3c_gpio_pm_4bit_con(struct s3c_gpio_chip *chip, int index) __raw_writel(gpcon, con); } -static void s3c_gpio_pm_4bit_resume(struct s3c_gpio_chip *chip) +static void samsung_gpio_pm_4bit_resume(struct samsung_gpio_chip *chip) { void __iomem *base = chip->base; u32 old_gpcon[2]; @@ -269,10 +269,10 @@ static void s3c_gpio_pm_4bit_resume(struct s3c_gpio_chip *chip) old_gpcon[0] = 0; old_gpcon[1] = __raw_readl(base + OFFS_CON); - s3c_gpio_pm_4bit_con(chip, 0); + samsung_gpio_pm_4bit_con(chip, 0); if (chip->chip.ngpio > 8) { old_gpcon[0] = __raw_readl(base - 4); - s3c_gpio_pm_4bit_con(chip, -1); + samsung_gpio_pm_4bit_con(chip, -1); } /* Now change the configurations that require DAT,CON */ @@ -298,19 +298,19 @@ static void s3c_gpio_pm_4bit_resume(struct s3c_gpio_chip *chip) old_gpdat, gps_gpdat); } -struct s3c_gpio_pm s3c_gpio_pm_4bit = { - .save = s3c_gpio_pm_4bit_save, - .resume = s3c_gpio_pm_4bit_resume, +struct samsung_gpio_pm samsung_gpio_pm_4bit = { + .save = samsung_gpio_pm_4bit_save, + .resume = samsung_gpio_pm_4bit_resume, }; #endif /* CONFIG_ARCH_S3C64XX || CONFIG_PLAT_S5P */ /** - * s3c_pm_save_gpio() - save gpio chip data for suspend + * samsung_pm_save_gpio() - save gpio chip data for suspend * @ourchip: The chip for suspend. */ -static void s3c_pm_save_gpio(struct s3c_gpio_chip *ourchip) +static void samsung_pm_save_gpio(struct samsung_gpio_chip *ourchip) { - struct s3c_gpio_pm *pm = ourchip->pm; + struct samsung_gpio_pm *pm = ourchip->pm; if (pm == NULL || pm->save == NULL) S3C_PMDBG("%s: no pm for %s\n", __func__, ourchip->chip.label); @@ -319,24 +319,24 @@ static void s3c_pm_save_gpio(struct s3c_gpio_chip *ourchip) } /** - * s3c_pm_save_gpios() - Save the state of the GPIO banks. + * samsung_pm_save_gpios() - Save the state of the GPIO banks. * * For all the GPIO banks, save the state of each one ready for going * into a suspend mode. */ -void s3c_pm_save_gpios(void) +void samsung_pm_save_gpios(void) { - struct s3c_gpio_chip *ourchip; + struct samsung_gpio_chip *ourchip; unsigned int gpio_nr; for (gpio_nr = 0; gpio_nr < S3C_GPIO_END;) { - ourchip = s3c_gpiolib_getchip(gpio_nr); + ourchip = samsung_gpiolib_getchip(gpio_nr); if (!ourchip) { gpio_nr++; continue; } - s3c_pm_save_gpio(ourchip); + samsung_pm_save_gpio(ourchip); S3C_PMDBG("%s: save %08x,%08x,%08x,%08x\n", ourchip->chip.label, @@ -351,12 +351,12 @@ void s3c_pm_save_gpios(void) } /** - * s3c_pm_resume_gpio() - restore gpio chip data after suspend + * samsung_pm_resume_gpio() - restore gpio chip data after suspend * @ourchip: The suspended chip. */ -static void s3c_pm_resume_gpio(struct s3c_gpio_chip *ourchip) +static void samsung_pm_resume_gpio(struct samsung_gpio_chip *ourchip) { - struct s3c_gpio_pm *pm = ourchip->pm; + struct samsung_gpio_pm *pm = ourchip->pm; if (pm == NULL || pm->resume == NULL) S3C_PMDBG("%s: no pm for %s\n", __func__, ourchip->chip.label); @@ -364,19 +364,19 @@ static void s3c_pm_resume_gpio(struct s3c_gpio_chip *ourchip) pm->resume(ourchip); } -void s3c_pm_restore_gpios(void) +void samsung_pm_restore_gpios(void) { - struct s3c_gpio_chip *ourchip; + struct samsung_gpio_chip *ourchip; unsigned int gpio_nr; for (gpio_nr = 0; gpio_nr < S3C_GPIO_END;) { - ourchip = s3c_gpiolib_getchip(gpio_nr); + ourchip = samsung_gpiolib_getchip(gpio_nr); if (!ourchip) { gpio_nr++; continue; } - s3c_pm_resume_gpio(ourchip); + samsung_pm_resume_gpio(ourchip); gpio_nr += ourchip->chip.ngpio; gpio_nr += CONFIG_S3C_GPIO_SPACE; diff --git a/arch/arm/plat-samsung/pm.c b/arch/arm/plat-samsung/pm.c index ae6f998..64ab65f 100644 --- a/arch/arm/plat-samsung/pm.c +++ b/arch/arm/plat-samsung/pm.c @@ -268,8 +268,8 @@ static int s3c_pm_enter(suspend_state_t state) /* save all necessary core registers not covered by the drivers */ - s3c_pm_save_gpios(); - s3c_pm_saved_gpios(); + samsung_pm_save_gpios(); + samsung_pm_saved_gpios(); s3c_pm_save_uarts(); s3c_pm_save_core(); @@ -306,7 +306,7 @@ static int s3c_pm_enter(suspend_state_t state) s3c_pm_restore_core(); s3c_pm_restore_uarts(); - s3c_pm_restore_gpios(); + samsung_pm_restore_gpios(); s3c_pm_restored_gpios(); s3c_pm_debug_init(); diff --git a/arch/arm/plat-samsung/pwm-clock.c b/arch/arm/plat-samsung/pwm-clock.c index f1bba88..a35ff3b 100644 --- a/arch/arm/plat-samsung/pwm-clock.c +++ b/arch/arm/plat-samsung/pwm-clock.c @@ -27,7 +27,7 @@ #include <plat/cpu.h> #include <plat/regs-timer.h> -#include <mach/pwm-clock.h> +#include <plat/pwm-clock.h> /* Each of the timers 0 through 5 go through the following * clock tree, with the inputs depending on the timers. @@ -339,8 +339,17 @@ static int clk_pwm_tin_set_parent(struct clk *clk, struct clk *parent) unsigned long bits; unsigned long shift = S3C2410_TCFG1_SHIFT(id); + unsigned long mux_tclk; + + if (soc_is_s3c24xx()) + mux_tclk = S3C2410_TCFG1_MUX_TCLK; + else if (soc_is_s5p6440() || soc_is_s5p6450()) + mux_tclk = 0; + else + mux_tclk = S3C64XX_TCFG1_MUX_TCLK; + if (parent == s3c24xx_pwmclk_tclk(id)) - bits = S3C_TCFG1_MUX_TCLK << shift; + bits = mux_tclk << shift; else if (parent == s3c24xx_pwmclk_tdiv(id)) bits = clk_pwm_tdiv_bits(to_tdiv(parent)) << shift; else diff --git a/arch/arm/plat-samsung/s3c-dma-ops.c b/arch/arm/plat-samsung/s3c-dma-ops.c new file mode 100644 index 0000000..582333c --- /dev/null +++ b/arch/arm/plat-samsung/s3c-dma-ops.c @@ -0,0 +1,130 @@ +/* linux/arch/arm/plat-samsung/s3c-dma-ops.c + * + * Copyright (c) 2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com + * + * Samsung S3C-DMA Operations + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/slab.h> +#include <linux/types.h> + +#include <mach/dma.h> + +struct cb_data { + void (*fp) (void *); + void *fp_param; + unsigned ch; + struct list_head node; +}; + +static LIST_HEAD(dma_list); + +static void s3c_dma_cb(struct s3c2410_dma_chan *channel, void *param, + int size, enum s3c2410_dma_buffresult res) +{ + struct cb_data *data = param; + + data->fp(data->fp_param); +} + +static unsigned s3c_dma_request(enum dma_ch dma_ch, + struct samsung_dma_info *info) +{ + struct cb_data *data; + + if (s3c2410_dma_request(dma_ch, info->client, NULL) < 0) { + s3c2410_dma_free(dma_ch, info->client); + return 0; + } + + data = kzalloc(sizeof(struct cb_data), GFP_KERNEL); + data->ch = dma_ch; + list_add_tail(&data->node, &dma_list); + + s3c2410_dma_devconfig(dma_ch, info->direction, info->fifo); + + if (info->cap == DMA_CYCLIC) + s3c2410_dma_setflags(dma_ch, S3C2410_DMAF_CIRCULAR); + + s3c2410_dma_config(dma_ch, info->width); + + return (unsigned)dma_ch; +} + +static int s3c_dma_release(unsigned ch, struct s3c2410_dma_client *client) +{ + struct cb_data *data; + + list_for_each_entry(data, &dma_list, node) + if (data->ch == ch) + break; + list_del(&data->node); + + s3c2410_dma_free(ch, client); + kfree(data); + + return 0; +} + +static int s3c_dma_prepare(unsigned ch, struct samsung_dma_prep_info *info) +{ + struct cb_data *data; + int len = (info->cap == DMA_CYCLIC) ? info->period : info->len; + + list_for_each_entry(data, &dma_list, node) + if (data->ch == ch) + break; + + if (!data->fp) { + s3c2410_dma_set_buffdone_fn(ch, s3c_dma_cb); + data->fp = info->fp; + data->fp_param = info->fp_param; + } + + s3c2410_dma_enqueue(ch, (void *)data, info->buf, len); + + return 0; +} + +static inline int s3c_dma_trigger(unsigned ch) +{ + return s3c2410_dma_ctrl(ch, S3C2410_DMAOP_START); +} + +static inline int s3c_dma_started(unsigned ch) +{ + return s3c2410_dma_ctrl(ch, S3C2410_DMAOP_STARTED); +} + +static inline int s3c_dma_flush(unsigned ch) +{ + return s3c2410_dma_ctrl(ch, S3C2410_DMAOP_FLUSH); +} + +static inline int s3c_dma_stop(unsigned ch) +{ + return s3c2410_dma_ctrl(ch, S3C2410_DMAOP_STOP); +} + +static struct samsung_dma_ops s3c_dma_ops = { + .request = s3c_dma_request, + .release = s3c_dma_release, + .prepare = s3c_dma_prepare, + .trigger = s3c_dma_trigger, + .started = s3c_dma_started, + .flush = s3c_dma_flush, + .stop = s3c_dma_stop, +}; + +void *s3c_dma_get_ops(void) +{ + return &s3c_dma_ops; +} +EXPORT_SYMBOL(s3c_dma_get_ops); diff --git a/arch/arm/plat-samsung/s3c-pl330.c b/arch/arm/plat-samsung/s3c-pl330.c deleted file mode 100644 index f85638c..0000000 --- a/arch/arm/plat-samsung/s3c-pl330.c +++ /dev/null @@ -1,1244 +0,0 @@ -/* linux/arch/arm/plat-samsung/s3c-pl330.c - * - * Copyright (C) 2010 Samsung Electronics Co. Ltd. - * Jaswinder Singh <jassi.brar@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - */ - -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/io.h> -#include <linux/slab.h> -#include <linux/platform_device.h> -#include <linux/clk.h> -#include <linux/err.h> - -#include <asm/hardware/pl330.h> - -#include <plat/s3c-pl330-pdata.h> - -/** - * struct s3c_pl330_dmac - Logical representation of a PL330 DMAC. - * @busy_chan: Number of channels currently busy. - * @peri: List of IDs of peripherals this DMAC can work with. - * @node: To attach to the global list of DMACs. - * @pi: PL330 configuration info for the DMAC. - * @kmcache: Pool to quickly allocate xfers for all channels in the dmac. - * @clk: Pointer of DMAC operation clock. - */ -struct s3c_pl330_dmac { - unsigned busy_chan; - enum dma_ch *peri; - struct list_head node; - struct pl330_info *pi; - struct kmem_cache *kmcache; - struct clk *clk; -}; - -/** - * struct s3c_pl330_xfer - A request submitted by S3C DMA clients. - * @token: Xfer ID provided by the client. - * @node: To attach to the list of xfers on a channel. - * @px: Xfer for PL330 core. - * @chan: Owner channel of this xfer. - */ -struct s3c_pl330_xfer { - void *token; - struct list_head node; - struct pl330_xfer px; - struct s3c_pl330_chan *chan; -}; - -/** - * struct s3c_pl330_chan - Logical channel to communicate with - * a Physical peripheral. - * @pl330_chan_id: Token of a hardware channel thread of PL330 DMAC. - * NULL if the channel is available to be acquired. - * @id: ID of the peripheral that this channel can communicate with. - * @options: Options specified by the client. - * @sdaddr: Address provided via s3c2410_dma_devconfig. - * @node: To attach to the global list of channels. - * @lrq: Pointer to the last submitted pl330_req to PL330 core. - * @xfer_list: To manage list of xfers enqueued. - * @req: Two requests to communicate with the PL330 engine. - * @callback_fn: Callback function to the client. - * @rqcfg: Channel configuration for the xfers. - * @xfer_head: Pointer to the xfer to be next executed. - * @dmac: Pointer to the DMAC that manages this channel, NULL if the - * channel is available to be acquired. - * @client: Client of this channel. NULL if the - * channel is available to be acquired. - */ -struct s3c_pl330_chan { - void *pl330_chan_id; - enum dma_ch id; - unsigned int options; - unsigned long sdaddr; - struct list_head node; - struct pl330_req *lrq; - struct list_head xfer_list; - struct pl330_req req[2]; - s3c2410_dma_cbfn_t callback_fn; - struct pl330_reqcfg rqcfg; - struct s3c_pl330_xfer *xfer_head; - struct s3c_pl330_dmac *dmac; - struct s3c2410_dma_client *client; -}; - -/* All DMACs in the platform */ -static LIST_HEAD(dmac_list); - -/* All channels to peripherals in the platform */ -static LIST_HEAD(chan_list); - -/* - * Since we add resources(DMACs and Channels) to the global pool, - * we need to guard access to the resources using a global lock - */ -static DEFINE_SPINLOCK(res_lock); - -/* Returns the channel with ID 'id' in the chan_list */ -static struct s3c_pl330_chan *id_to_chan(const enum dma_ch id) -{ - struct s3c_pl330_chan *ch; - - list_for_each_entry(ch, &chan_list, node) - if (ch->id == id) - return ch; - - return NULL; -} - -/* Allocate a new channel with ID 'id' and add to chan_list */ -static void chan_add(const enum dma_ch id) -{ - struct s3c_pl330_chan *ch = id_to_chan(id); - - /* Return if the channel already exists */ - if (ch) - return; - - ch = kmalloc(sizeof(*ch), GFP_KERNEL); - /* Return silently to work with other channels */ - if (!ch) - return; - - ch->id = id; - ch->dmac = NULL; - - list_add_tail(&ch->node, &chan_list); -} - -/* If the channel is not yet acquired by any client */ -static bool chan_free(struct s3c_pl330_chan *ch) -{ - if (!ch) - return false; - - /* Channel points to some DMAC only when it's acquired */ - return ch->dmac ? false : true; -} - -/* - * Returns 0 is peripheral i/f is invalid or not present on the dmac. - * Index + 1, otherwise. - */ -static unsigned iface_of_dmac(struct s3c_pl330_dmac *dmac, enum dma_ch ch_id) -{ - enum dma_ch *id = dmac->peri; - int i; - - /* Discount invalid markers */ - if (ch_id == DMACH_MAX) - return 0; - - for (i = 0; i < PL330_MAX_PERI; i++) - if (id[i] == ch_id) - return i + 1; - - return 0; -} - -/* If all channel threads of the DMAC are busy */ -static inline bool dmac_busy(struct s3c_pl330_dmac *dmac) -{ - struct pl330_info *pi = dmac->pi; - - return (dmac->busy_chan < pi->pcfg.num_chan) ? false : true; -} - -/* - * Returns the number of free channels that - * can be handled by this dmac only. - */ -static unsigned ch_onlyby_dmac(struct s3c_pl330_dmac *dmac) -{ - enum dma_ch *id = dmac->peri; - struct s3c_pl330_dmac *d; - struct s3c_pl330_chan *ch; - unsigned found, count = 0; - enum dma_ch p; - int i; - - for (i = 0; i < PL330_MAX_PERI; i++) { - p = id[i]; - ch = id_to_chan(p); - - if (p == DMACH_MAX || !chan_free(ch)) - continue; - - found = 0; - list_for_each_entry(d, &dmac_list, node) { - if (d != dmac && iface_of_dmac(d, ch->id)) { - found = 1; - break; - } - } - if (!found) - count++; - } - - return count; -} - -/* - * Measure of suitability of 'dmac' handling 'ch' - * - * 0 indicates 'dmac' can not handle 'ch' either - * because it is not supported by the hardware or - * because all dmac channels are currently busy. - * - * >0 vlaue indicates 'dmac' has the capability. - * The bigger the value the more suitable the dmac. - */ -#define MAX_SUIT UINT_MAX -#define MIN_SUIT 0 - -static unsigned suitablility(struct s3c_pl330_dmac *dmac, - struct s3c_pl330_chan *ch) -{ - struct pl330_info *pi = dmac->pi; - enum dma_ch *id = dmac->peri; - struct s3c_pl330_dmac *d; - unsigned s; - int i; - - s = MIN_SUIT; - /* If all the DMAC channel threads are busy */ - if (dmac_busy(dmac)) - return s; - - for (i = 0; i < PL330_MAX_PERI; i++) - if (id[i] == ch->id) - break; - - /* If the 'dmac' can't talk to 'ch' */ - if (i == PL330_MAX_PERI) - return s; - - s = MAX_SUIT; - list_for_each_entry(d, &dmac_list, node) { - /* - * If some other dmac can talk to this - * peri and has some channel free. - */ - if (d != dmac && iface_of_dmac(d, ch->id) && !dmac_busy(d)) { - s = 0; - break; - } - } - if (s) - return s; - - s = 100; - - /* Good if free chans are more, bad otherwise */ - s += (pi->pcfg.num_chan - dmac->busy_chan) - ch_onlyby_dmac(dmac); - - return s; -} - -/* More than one DMAC may have capability to transfer data with the - * peripheral. This function assigns most suitable DMAC to manage the - * channel and hence communicate with the peripheral. - */ -static struct s3c_pl330_dmac *map_chan_to_dmac(struct s3c_pl330_chan *ch) -{ - struct s3c_pl330_dmac *d, *dmac = NULL; - unsigned sn, sl = MIN_SUIT; - - list_for_each_entry(d, &dmac_list, node) { - sn = suitablility(d, ch); - - if (sn == MAX_SUIT) - return d; - - if (sn > sl) - dmac = d; - } - - return dmac; -} - -/* Acquire the channel for peripheral 'id' */ -static struct s3c_pl330_chan *chan_acquire(const enum dma_ch id) -{ - struct s3c_pl330_chan *ch = id_to_chan(id); - struct s3c_pl330_dmac *dmac; - - /* If the channel doesn't exist or is already acquired */ - if (!ch || !chan_free(ch)) { - ch = NULL; - goto acq_exit; - } - - dmac = map_chan_to_dmac(ch); - /* If couldn't map */ - if (!dmac) { - ch = NULL; - goto acq_exit; - } - - dmac->busy_chan++; - ch->dmac = dmac; - -acq_exit: - return ch; -} - -/* Delete xfer from the queue */ -static inline void del_from_queue(struct s3c_pl330_xfer *xfer) -{ - struct s3c_pl330_xfer *t; - struct s3c_pl330_chan *ch; - int found; - - if (!xfer) - return; - - ch = xfer->chan; - - /* Make sure xfer is in the queue */ - found = 0; - list_for_each_entry(t, &ch->xfer_list, node) - if (t == xfer) { - found = 1; - break; - } - - if (!found) - return; - - /* If xfer is last entry in the queue */ - if (xfer->node.next == &ch->xfer_list) - t = list_entry(ch->xfer_list.next, - struct s3c_pl330_xfer, node); - else - t = list_entry(xfer->node.next, - struct s3c_pl330_xfer, node); - - /* If there was only one node left */ - if (t == xfer) - ch->xfer_head = NULL; - else if (ch->xfer_head == xfer) - ch->xfer_head = t; - - list_del(&xfer->node); -} - -/* Provides pointer to the next xfer in the queue. - * If CIRCULAR option is set, the list is left intact, - * otherwise the xfer is removed from the list. - * Forced delete 'pluck' can be set to override the CIRCULAR option. - */ -static struct s3c_pl330_xfer *get_from_queue(struct s3c_pl330_chan *ch, - int pluck) -{ - struct s3c_pl330_xfer *xfer = ch->xfer_head; - - if (!xfer) - return NULL; - - /* If xfer is last entry in the queue */ - if (xfer->node.next == &ch->xfer_list) - ch->xfer_head = list_entry(ch->xfer_list.next, - struct s3c_pl330_xfer, node); - else - ch->xfer_head = list_entry(xfer->node.next, - struct s3c_pl330_xfer, node); - - if (pluck || !(ch->options & S3C2410_DMAF_CIRCULAR)) - del_from_queue(xfer); - - return xfer; -} - -static inline void add_to_queue(struct s3c_pl330_chan *ch, - struct s3c_pl330_xfer *xfer, int front) -{ - struct pl330_xfer *xt; - - /* If queue empty */ - if (ch->xfer_head == NULL) - ch->xfer_head = xfer; - - xt = &ch->xfer_head->px; - /* If the head already submitted (CIRCULAR head) */ - if (ch->options & S3C2410_DMAF_CIRCULAR && - (xt == ch->req[0].x || xt == ch->req[1].x)) - ch->xfer_head = xfer; - - /* If this is a resubmission, it should go at the head */ - if (front) { - ch->xfer_head = xfer; - list_add(&xfer->node, &ch->xfer_list); - } else { - list_add_tail(&xfer->node, &ch->xfer_list); - } -} - -static inline void _finish_off(struct s3c_pl330_xfer *xfer, - enum s3c2410_dma_buffresult res, int ffree) -{ - struct s3c_pl330_chan *ch; - - if (!xfer) - return; - - ch = xfer->chan; - - /* Do callback */ - if (ch->callback_fn) - ch->callback_fn(NULL, xfer->token, xfer->px.bytes, res); - - /* Force Free or if buffer is not needed anymore */ - if (ffree || !(ch->options & S3C2410_DMAF_CIRCULAR)) - kmem_cache_free(ch->dmac->kmcache, xfer); -} - -static inline int s3c_pl330_submit(struct s3c_pl330_chan *ch, - struct pl330_req *r) -{ - struct s3c_pl330_xfer *xfer; - int ret = 0; - - /* If already submitted */ - if (r->x) - return 0; - - xfer = get_from_queue(ch, 0); - if (xfer) { - r->x = &xfer->px; - - /* Use max bandwidth for M<->M xfers */ - if (r->rqtype == MEMTOMEM) { - struct pl330_info *pi = xfer->chan->dmac->pi; - int burst = 1 << ch->rqcfg.brst_size; - u32 bytes = r->x->bytes; - int bl; - - bl = pi->pcfg.data_bus_width / 8; - bl *= pi->pcfg.data_buf_dep; - bl /= burst; - - /* src/dst_burst_len can't be more than 16 */ - if (bl > 16) - bl = 16; - - while (bl > 1) { - if (!(bytes % (bl * burst))) - break; - bl--; - } - - ch->rqcfg.brst_len = bl; - } else { - ch->rqcfg.brst_len = 1; - } - - ret = pl330_submit_req(ch->pl330_chan_id, r); - - /* If submission was successful */ - if (!ret) { - ch->lrq = r; /* latest submitted req */ - return 0; - } - - r->x = NULL; - - /* If both of the PL330 ping-pong buffers filled */ - if (ret == -EAGAIN) { - dev_err(ch->dmac->pi->dev, "%s:%d!\n", - __func__, __LINE__); - /* Queue back again */ - add_to_queue(ch, xfer, 1); - ret = 0; - } else { - dev_err(ch->dmac->pi->dev, "%s:%d!\n", - __func__, __LINE__); - _finish_off(xfer, S3C2410_RES_ERR, 0); - } - } - - return ret; -} - -static void s3c_pl330_rq(struct s3c_pl330_chan *ch, - struct pl330_req *r, enum pl330_op_err err) -{ - unsigned long flags; - struct s3c_pl330_xfer *xfer; - struct pl330_xfer *xl = r->x; - enum s3c2410_dma_buffresult res; - - spin_lock_irqsave(&res_lock, flags); - - r->x = NULL; - - s3c_pl330_submit(ch, r); - - spin_unlock_irqrestore(&res_lock, flags); - - /* Map result to S3C DMA API */ - if (err == PL330_ERR_NONE) - res = S3C2410_RES_OK; - else if (err == PL330_ERR_ABORT) - res = S3C2410_RES_ABORT; - else - res = S3C2410_RES_ERR; - - /* If last request had some xfer */ - if (xl) { - xfer = container_of(xl, struct s3c_pl330_xfer, px); - _finish_off(xfer, res, 0); - } else { - dev_info(ch->dmac->pi->dev, "%s:%d No Xfer?!\n", - __func__, __LINE__); - } -} - -static void s3c_pl330_rq0(void *token, enum pl330_op_err err) -{ - struct pl330_req *r = token; - struct s3c_pl330_chan *ch = container_of(r, - struct s3c_pl330_chan, req[0]); - s3c_pl330_rq(ch, r, err); -} - -static void s3c_pl330_rq1(void *token, enum pl330_op_err err) -{ - struct pl330_req *r = token; - struct s3c_pl330_chan *ch = container_of(r, - struct s3c_pl330_chan, req[1]); - s3c_pl330_rq(ch, r, err); -} - -/* Release an acquired channel */ -static void chan_release(struct s3c_pl330_chan *ch) -{ - struct s3c_pl330_dmac *dmac; - - if (chan_free(ch)) - return; - - dmac = ch->dmac; - ch->dmac = NULL; - dmac->busy_chan--; -} - -int s3c2410_dma_ctrl(enum dma_ch id, enum s3c2410_chan_op op) -{ - struct s3c_pl330_xfer *xfer; - enum pl330_chan_op pl330op; - struct s3c_pl330_chan *ch; - unsigned long flags; - int idx, ret; - - spin_lock_irqsave(&res_lock, flags); - - ch = id_to_chan(id); - - if (!ch || chan_free(ch)) { - ret = -EINVAL; - goto ctrl_exit; - } - - switch (op) { - case S3C2410_DMAOP_START: - /* Make sure both reqs are enqueued */ - idx = (ch->lrq == &ch->req[0]) ? 1 : 0; - s3c_pl330_submit(ch, &ch->req[idx]); - s3c_pl330_submit(ch, &ch->req[1 - idx]); - pl330op = PL330_OP_START; - break; - - case S3C2410_DMAOP_STOP: - pl330op = PL330_OP_ABORT; - break; - - case S3C2410_DMAOP_FLUSH: - pl330op = PL330_OP_FLUSH; - break; - - case S3C2410_DMAOP_PAUSE: - case S3C2410_DMAOP_RESUME: - case S3C2410_DMAOP_TIMEOUT: - case S3C2410_DMAOP_STARTED: - spin_unlock_irqrestore(&res_lock, flags); - return 0; - - default: - spin_unlock_irqrestore(&res_lock, flags); - return -EINVAL; - } - - ret = pl330_chan_ctrl(ch->pl330_chan_id, pl330op); - - if (pl330op == PL330_OP_START) { - spin_unlock_irqrestore(&res_lock, flags); - return ret; - } - - idx = (ch->lrq == &ch->req[0]) ? 1 : 0; - - /* Abort the current xfer */ - if (ch->req[idx].x) { - xfer = container_of(ch->req[idx].x, - struct s3c_pl330_xfer, px); - - /* Drop xfer during FLUSH */ - if (pl330op == PL330_OP_FLUSH) - del_from_queue(xfer); - - ch->req[idx].x = NULL; - - spin_unlock_irqrestore(&res_lock, flags); - _finish_off(xfer, S3C2410_RES_ABORT, - pl330op == PL330_OP_FLUSH ? 1 : 0); - spin_lock_irqsave(&res_lock, flags); - } - - /* Flush the whole queue */ - if (pl330op == PL330_OP_FLUSH) { - - if (ch->req[1 - idx].x) { - xfer = container_of(ch->req[1 - idx].x, - struct s3c_pl330_xfer, px); - - del_from_queue(xfer); - - ch->req[1 - idx].x = NULL; - - spin_unlock_irqrestore(&res_lock, flags); - _finish_off(xfer, S3C2410_RES_ABORT, 1); - spin_lock_irqsave(&res_lock, flags); - } - - /* Finish off the remaining in the queue */ - xfer = ch->xfer_head; - while (xfer) { - - del_from_queue(xfer); - - spin_unlock_irqrestore(&res_lock, flags); - _finish_off(xfer, S3C2410_RES_ABORT, 1); - spin_lock_irqsave(&res_lock, flags); - - xfer = ch->xfer_head; - } - } - -ctrl_exit: - spin_unlock_irqrestore(&res_lock, flags); - - return ret; -} -EXPORT_SYMBOL(s3c2410_dma_ctrl); - -int s3c2410_dma_enqueue(enum dma_ch id, void *token, - dma_addr_t addr, int size) -{ - struct s3c_pl330_chan *ch; - struct s3c_pl330_xfer *xfer; - unsigned long flags; - int idx, ret = 0; - - spin_lock_irqsave(&res_lock, flags); - - ch = id_to_chan(id); - - /* Error if invalid or free channel */ - if (!ch || chan_free(ch)) { - ret = -EINVAL; - goto enq_exit; - } - - /* Error if size is unaligned */ - if (ch->rqcfg.brst_size && size % (1 << ch->rqcfg.brst_size)) { - ret = -EINVAL; - goto enq_exit; - } - - xfer = kmem_cache_alloc(ch->dmac->kmcache, GFP_ATOMIC); - if (!xfer) { - ret = -ENOMEM; - goto enq_exit; - } - - xfer->token = token; - xfer->chan = ch; - xfer->px.bytes = size; - xfer->px.next = NULL; /* Single request */ - - /* For S3C DMA API, direction is always fixed for all xfers */ - if (ch->req[0].rqtype == MEMTODEV) { - xfer->px.src_addr = addr; - xfer->px.dst_addr = ch->sdaddr; - } else { - xfer->px.src_addr = ch->sdaddr; - xfer->px.dst_addr = addr; - } - - add_to_queue(ch, xfer, 0); - - /* Try submitting on either request */ - idx = (ch->lrq == &ch->req[0]) ? 1 : 0; - - if (!ch->req[idx].x) - s3c_pl330_submit(ch, &ch->req[idx]); - else - s3c_pl330_submit(ch, &ch->req[1 - idx]); - - spin_unlock_irqrestore(&res_lock, flags); - - if (ch->options & S3C2410_DMAF_AUTOSTART) - s3c2410_dma_ctrl(id, S3C2410_DMAOP_START); - - return 0; - -enq_exit: - spin_unlock_irqrestore(&res_lock, flags); - - return ret; -} -EXPORT_SYMBOL(s3c2410_dma_enqueue); - -int s3c2410_dma_request(enum dma_ch id, - struct s3c2410_dma_client *client, - void *dev) -{ - struct s3c_pl330_dmac *dmac; - struct s3c_pl330_chan *ch; - unsigned long flags; - int ret = 0; - - spin_lock_irqsave(&res_lock, flags); - - ch = chan_acquire(id); - if (!ch) { - ret = -EBUSY; - goto req_exit; - } - - dmac = ch->dmac; - - ch->pl330_chan_id = pl330_request_channel(dmac->pi); - if (!ch->pl330_chan_id) { - chan_release(ch); - ret = -EBUSY; - goto req_exit; - } - - ch->client = client; - ch->options = 0; /* Clear any option */ - ch->callback_fn = NULL; /* Clear any callback */ - ch->lrq = NULL; - - ch->rqcfg.brst_size = 2; /* Default word size */ - ch->rqcfg.swap = SWAP_NO; - ch->rqcfg.scctl = SCCTRL0; /* Noncacheable and nonbufferable */ - ch->rqcfg.dcctl = DCCTRL0; /* Noncacheable and nonbufferable */ - ch->rqcfg.privileged = 0; - ch->rqcfg.insnaccess = 0; - - /* Set invalid direction */ - ch->req[0].rqtype = DEVTODEV; - ch->req[1].rqtype = ch->req[0].rqtype; - - ch->req[0].cfg = &ch->rqcfg; - ch->req[1].cfg = ch->req[0].cfg; - - ch->req[0].peri = iface_of_dmac(dmac, id) - 1; /* Original index */ - ch->req[1].peri = ch->req[0].peri; - - ch->req[0].token = &ch->req[0]; - ch->req[0].xfer_cb = s3c_pl330_rq0; - ch->req[1].token = &ch->req[1]; - ch->req[1].xfer_cb = s3c_pl330_rq1; - - ch->req[0].x = NULL; - ch->req[1].x = NULL; - - /* Reset xfer list */ - INIT_LIST_HEAD(&ch->xfer_list); - ch->xfer_head = NULL; - -req_exit: - spin_unlock_irqrestore(&res_lock, flags); - - return ret; -} -EXPORT_SYMBOL(s3c2410_dma_request); - -int s3c2410_dma_free(enum dma_ch id, struct s3c2410_dma_client *client) -{ - struct s3c_pl330_chan *ch; - struct s3c_pl330_xfer *xfer; - unsigned long flags; - int ret = 0; - unsigned idx; - - spin_lock_irqsave(&res_lock, flags); - - ch = id_to_chan(id); - - if (!ch || chan_free(ch)) - goto free_exit; - - /* Refuse if someone else wanted to free the channel */ - if (ch->client != client) { - ret = -EBUSY; - goto free_exit; - } - - /* Stop any active xfer, Flushe the queue and do callbacks */ - pl330_chan_ctrl(ch->pl330_chan_id, PL330_OP_FLUSH); - - /* Abort the submitted requests */ - idx = (ch->lrq == &ch->req[0]) ? 1 : 0; - - if (ch->req[idx].x) { - xfer = container_of(ch->req[idx].x, - struct s3c_pl330_xfer, px); - - ch->req[idx].x = NULL; - del_from_queue(xfer); - - spin_unlock_irqrestore(&res_lock, flags); - _finish_off(xfer, S3C2410_RES_ABORT, 1); - spin_lock_irqsave(&res_lock, flags); - } - - if (ch->req[1 - idx].x) { - xfer = container_of(ch->req[1 - idx].x, - struct s3c_pl330_xfer, px); - - ch->req[1 - idx].x = NULL; - del_from_queue(xfer); - - spin_unlock_irqrestore(&res_lock, flags); - _finish_off(xfer, S3C2410_RES_ABORT, 1); - spin_lock_irqsave(&res_lock, flags); - } - - /* Pluck and Abort the queued requests in order */ - do { - xfer = get_from_queue(ch, 1); - - spin_unlock_irqrestore(&res_lock, flags); - _finish_off(xfer, S3C2410_RES_ABORT, 1); - spin_lock_irqsave(&res_lock, flags); - } while (xfer); - - ch->client = NULL; - - pl330_release_channel(ch->pl330_chan_id); - - ch->pl330_chan_id = NULL; - - chan_release(ch); - -free_exit: - spin_unlock_irqrestore(&res_lock, flags); - - return ret; -} -EXPORT_SYMBOL(s3c2410_dma_free); - -int s3c2410_dma_config(enum dma_ch id, int xferunit) -{ - struct s3c_pl330_chan *ch; - struct pl330_info *pi; - unsigned long flags; - int i, dbwidth, ret = 0; - - spin_lock_irqsave(&res_lock, flags); - - ch = id_to_chan(id); - - if (!ch || chan_free(ch)) { - ret = -EINVAL; - goto cfg_exit; - } - - pi = ch->dmac->pi; - dbwidth = pi->pcfg.data_bus_width / 8; - - /* Max size of xfer can be pcfg.data_bus_width */ - if (xferunit > dbwidth) { - ret = -EINVAL; - goto cfg_exit; - } - - i = 0; - while (xferunit != (1 << i)) - i++; - - /* If valid value */ - if (xferunit == (1 << i)) - ch->rqcfg.brst_size = i; - else - ret = -EINVAL; - -cfg_exit: - spin_unlock_irqrestore(&res_lock, flags); - - return ret; -} -EXPORT_SYMBOL(s3c2410_dma_config); - -/* Options that are supported by this driver */ -#define S3C_PL330_FLAGS (S3C2410_DMAF_CIRCULAR | S3C2410_DMAF_AUTOSTART) - -int s3c2410_dma_setflags(enum dma_ch id, unsigned int options) -{ - struct s3c_pl330_chan *ch; - unsigned long flags; - int ret = 0; - - spin_lock_irqsave(&res_lock, flags); - - ch = id_to_chan(id); - - if (!ch || chan_free(ch) || options & ~(S3C_PL330_FLAGS)) - ret = -EINVAL; - else - ch->options = options; - - spin_unlock_irqrestore(&res_lock, flags); - - return 0; -} -EXPORT_SYMBOL(s3c2410_dma_setflags); - -int s3c2410_dma_set_buffdone_fn(enum dma_ch id, s3c2410_dma_cbfn_t rtn) -{ - struct s3c_pl330_chan *ch; - unsigned long flags; - int ret = 0; - - spin_lock_irqsave(&res_lock, flags); - - ch = id_to_chan(id); - - if (!ch || chan_free(ch)) - ret = -EINVAL; - else - ch->callback_fn = rtn; - - spin_unlock_irqrestore(&res_lock, flags); - - return ret; -} -EXPORT_SYMBOL(s3c2410_dma_set_buffdone_fn); - -int s3c2410_dma_devconfig(enum dma_ch id, enum s3c2410_dmasrc source, - unsigned long address) -{ - struct s3c_pl330_chan *ch; - unsigned long flags; - int ret = 0; - - spin_lock_irqsave(&res_lock, flags); - - ch = id_to_chan(id); - - if (!ch || chan_free(ch)) { - ret = -EINVAL; - goto devcfg_exit; - } - - switch (source) { - case S3C2410_DMASRC_HW: /* P->M */ - ch->req[0].rqtype = DEVTOMEM; - ch->req[1].rqtype = DEVTOMEM; - ch->rqcfg.src_inc = 0; - ch->rqcfg.dst_inc = 1; - break; - case S3C2410_DMASRC_MEM: /* M->P */ - ch->req[0].rqtype = MEMTODEV; - ch->req[1].rqtype = MEMTODEV; - ch->rqcfg.src_inc = 1; - ch->rqcfg.dst_inc = 0; - break; - default: - ret = -EINVAL; - goto devcfg_exit; - } - - ch->sdaddr = address; - -devcfg_exit: - spin_unlock_irqrestore(&res_lock, flags); - - return ret; -} -EXPORT_SYMBOL(s3c2410_dma_devconfig); - -int s3c2410_dma_getposition(enum dma_ch id, dma_addr_t *src, dma_addr_t *dst) -{ - struct s3c_pl330_chan *ch = id_to_chan(id); - struct pl330_chanstatus status; - int ret; - - if (!ch || chan_free(ch)) - return -EINVAL; - - ret = pl330_chan_status(ch->pl330_chan_id, &status); - if (ret < 0) - return ret; - - *src = status.src_addr; - *dst = status.dst_addr; - - return 0; -} -EXPORT_SYMBOL(s3c2410_dma_getposition); - -static irqreturn_t pl330_irq_handler(int irq, void *data) -{ - if (pl330_update(data)) - return IRQ_HANDLED; - else - return IRQ_NONE; -} - -static int pl330_probe(struct platform_device *pdev) -{ - struct s3c_pl330_dmac *s3c_pl330_dmac; - struct s3c_pl330_platdata *pl330pd; - struct pl330_info *pl330_info; - struct resource *res; - int i, ret, irq; - - pl330pd = pdev->dev.platform_data; - - /* Can't do without the list of _32_ peripherals */ - if (!pl330pd || !pl330pd->peri) { - dev_err(&pdev->dev, "platform data missing!\n"); - return -ENODEV; - } - - pl330_info = kzalloc(sizeof(*pl330_info), GFP_KERNEL); - if (!pl330_info) - return -ENOMEM; - - pl330_info->pl330_data = NULL; - pl330_info->dev = &pdev->dev; - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - if (!res) { - ret = -ENODEV; - goto probe_err1; - } - - request_mem_region(res->start, resource_size(res), pdev->name); - - pl330_info->base = ioremap(res->start, resource_size(res)); - if (!pl330_info->base) { - ret = -ENXIO; - goto probe_err2; - } - - irq = platform_get_irq(pdev, 0); - if (irq < 0) { - ret = irq; - goto probe_err3; - } - - ret = request_irq(irq, pl330_irq_handler, 0, - dev_name(&pdev->dev), pl330_info); - if (ret) - goto probe_err4; - - /* Allocate a new DMAC */ - s3c_pl330_dmac = kmalloc(sizeof(*s3c_pl330_dmac), GFP_KERNEL); - if (!s3c_pl330_dmac) { - ret = -ENOMEM; - goto probe_err5; - } - - /* Get operation clock and enable it */ - s3c_pl330_dmac->clk = clk_get(&pdev->dev, "pdma"); - if (IS_ERR(s3c_pl330_dmac->clk)) { - dev_err(&pdev->dev, "Cannot get operation clock.\n"); - ret = -EINVAL; - goto probe_err6; - } - clk_enable(s3c_pl330_dmac->clk); - - ret = pl330_add(pl330_info); - if (ret) - goto probe_err7; - - /* Hook the info */ - s3c_pl330_dmac->pi = pl330_info; - - /* No busy channels */ - s3c_pl330_dmac->busy_chan = 0; - - s3c_pl330_dmac->kmcache = kmem_cache_create(dev_name(&pdev->dev), - sizeof(struct s3c_pl330_xfer), 0, 0, NULL); - - if (!s3c_pl330_dmac->kmcache) { - ret = -ENOMEM; - goto probe_err8; - } - - /* Get the list of peripherals */ - s3c_pl330_dmac->peri = pl330pd->peri; - - /* Attach to the list of DMACs */ - list_add_tail(&s3c_pl330_dmac->node, &dmac_list); - - /* Create a channel for each peripheral in the DMAC - * that is, if it doesn't already exist - */ - for (i = 0; i < PL330_MAX_PERI; i++) - if (s3c_pl330_dmac->peri[i] != DMACH_MAX) - chan_add(s3c_pl330_dmac->peri[i]); - - printk(KERN_INFO - "Loaded driver for PL330 DMAC-%d %s\n", pdev->id, pdev->name); - printk(KERN_INFO - "\tDBUFF-%ux%ubytes Num_Chans-%u Num_Peri-%u Num_Events-%u\n", - pl330_info->pcfg.data_buf_dep, - pl330_info->pcfg.data_bus_width / 8, pl330_info->pcfg.num_chan, - pl330_info->pcfg.num_peri, pl330_info->pcfg.num_events); - - return 0; - -probe_err8: - pl330_del(pl330_info); -probe_err7: - clk_disable(s3c_pl330_dmac->clk); - clk_put(s3c_pl330_dmac->clk); -probe_err6: - kfree(s3c_pl330_dmac); -probe_err5: - free_irq(irq, pl330_info); -probe_err4: -probe_err3: - iounmap(pl330_info->base); -probe_err2: - release_mem_region(res->start, resource_size(res)); -probe_err1: - kfree(pl330_info); - - return ret; -} - -static int pl330_remove(struct platform_device *pdev) -{ - struct s3c_pl330_dmac *dmac, *d; - struct s3c_pl330_chan *ch; - unsigned long flags; - int del, found; - - if (!pdev->dev.platform_data) - return -EINVAL; - - spin_lock_irqsave(&res_lock, flags); - - found = 0; - list_for_each_entry(d, &dmac_list, node) - if (d->pi->dev == &pdev->dev) { - found = 1; - break; - } - - if (!found) { - spin_unlock_irqrestore(&res_lock, flags); - return 0; - } - - dmac = d; - - /* Remove all Channels that are managed only by this DMAC */ - list_for_each_entry(ch, &chan_list, node) { - - /* Only channels that are handled by this DMAC */ - if (iface_of_dmac(dmac, ch->id)) - del = 1; - else - continue; - - /* Don't remove if some other DMAC has it too */ - list_for_each_entry(d, &dmac_list, node) - if (d != dmac && iface_of_dmac(d, ch->id)) { - del = 0; - break; - } - - if (del) { - spin_unlock_irqrestore(&res_lock, flags); - s3c2410_dma_free(ch->id, ch->client); - spin_lock_irqsave(&res_lock, flags); - list_del(&ch->node); - kfree(ch); - } - } - - /* Disable operation clock */ - clk_disable(dmac->clk); - clk_put(dmac->clk); - - /* Remove the DMAC */ - list_del(&dmac->node); - kfree(dmac); - - spin_unlock_irqrestore(&res_lock, flags); - - return 0; -} - -static struct platform_driver pl330_driver = { - .driver = { - .owner = THIS_MODULE, - .name = "s3c-pl330", - }, - .probe = pl330_probe, - .remove = pl330_remove, -}; - -static int __init pl330_init(void) -{ - return platform_driver_register(&pl330_driver); -} -module_init(pl330_init); - -static void __exit pl330_exit(void) -{ - platform_driver_unregister(&pl330_driver); - return; -} -module_exit(pl330_exit); - -MODULE_AUTHOR("Jaswinder Singh <jassi.brar@samsung.com>"); -MODULE_DESCRIPTION("Driver for PL330 DMA Controller"); -MODULE_LICENSE("GPL"); diff --git a/arch/s390/include/asm/pgtable.h b/arch/s390/include/asm/pgtable.h index 519eb5f..c0cb794 100644 --- a/arch/s390/include/asm/pgtable.h +++ b/arch/s390/include/asm/pgtable.h @@ -658,12 +658,14 @@ static inline void pgste_set_pte(pte_t *ptep, pgste_t pgste) * struct gmap_struct - guest address space * @mm: pointer to the parent mm_struct * @table: pointer to the page directory + * @asce: address space control element for gmap page table * @crst_list: list of all crst tables used in the guest address space */ struct gmap { struct list_head list; struct mm_struct *mm; unsigned long *table; + unsigned long asce; struct list_head crst_list; }; diff --git a/arch/s390/kernel/asm-offsets.c b/arch/s390/kernel/asm-offsets.c index 532fd43..2b45591 100644 --- a/arch/s390/kernel/asm-offsets.c +++ b/arch/s390/kernel/asm-offsets.c @@ -10,6 +10,7 @@ #include <linux/sched.h> #include <asm/vdso.h> #include <asm/sigp.h> +#include <asm/pgtable.h> /* * Make sure that the compiler is new enough. We want a compiler that @@ -126,6 +127,7 @@ int main(void) DEFINE(__LC_KERNEL_STACK, offsetof(struct _lowcore, kernel_stack)); DEFINE(__LC_ASYNC_STACK, offsetof(struct _lowcore, async_stack)); DEFINE(__LC_PANIC_STACK, offsetof(struct _lowcore, panic_stack)); + DEFINE(__LC_USER_ASCE, offsetof(struct _lowcore, user_asce)); DEFINE(__LC_INT_CLOCK, offsetof(struct _lowcore, int_clock)); DEFINE(__LC_MCCK_CLOCK, offsetof(struct _lowcore, mcck_clock)); DEFINE(__LC_MACHINE_FLAGS, offsetof(struct _lowcore, machine_flags)); @@ -151,6 +153,7 @@ int main(void) DEFINE(__LC_VDSO_PER_CPU, offsetof(struct _lowcore, vdso_per_cpu_data)); DEFINE(__LC_GMAP, offsetof(struct _lowcore, gmap)); DEFINE(__LC_CMF_HPP, offsetof(struct _lowcore, cmf_hpp)); + DEFINE(__GMAP_ASCE, offsetof(struct gmap, asce)); #endif /* CONFIG_32BIT */ return 0; } diff --git a/arch/s390/kernel/entry64.S b/arch/s390/kernel/entry64.S index 5f729d6..713da07 100644 --- a/arch/s390/kernel/entry64.S +++ b/arch/s390/kernel/entry64.S @@ -1076,6 +1076,11 @@ sie_loop: lg %r14,__LC_THREAD_INFO # pointer thread_info struct tm __TI_flags+7(%r14),_TIF_EXIT_SIE jnz sie_exit + lg %r14,__LC_GMAP # get gmap pointer + ltgr %r14,%r14 + jz sie_gmap + lctlg %c1,%c1,__GMAP_ASCE(%r14) # load primary asce +sie_gmap: lg %r14,__SF_EMPTY(%r15) # get control block pointer SPP __SF_EMPTY(%r15) # set guest id sie 0(%r14) @@ -1083,6 +1088,7 @@ sie_done: SPP __LC_CMF_HPP # set host id lg %r14,__LC_THREAD_INFO # pointer thread_info struct sie_exit: + lctlg %c1,%c1,__LC_USER_ASCE # load primary asce ni __TI_flags+6(%r14),255-(_TIF_SIE>>8) lg %r14,__SF_EMPTY+8(%r15) # load guest register save area stmg %r0,%r13,0(%r14) # save guest gprs 0-13 diff --git a/arch/s390/kvm/kvm-s390.c b/arch/s390/kvm/kvm-s390.c index f17296e..dc2b580 100644 --- a/arch/s390/kvm/kvm-s390.c +++ b/arch/s390/kvm/kvm-s390.c @@ -123,6 +123,7 @@ int kvm_dev_ioctl_check_extension(long ext) switch (ext) { case KVM_CAP_S390_PSW: + case KVM_CAP_S390_GMAP: r = 1; break; default: @@ -263,10 +264,12 @@ void kvm_arch_vcpu_load(struct kvm_vcpu *vcpu, int cpu) vcpu->arch.guest_fpregs.fpc &= FPC_VALID_MASK; restore_fp_regs(&vcpu->arch.guest_fpregs); restore_access_regs(vcpu->arch.guest_acrs); + gmap_enable(vcpu->arch.gmap); } void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu) { + gmap_disable(vcpu->arch.gmap); save_fp_regs(&vcpu->arch.guest_fpregs); save_access_regs(vcpu->arch.guest_acrs); restore_fp_regs(&vcpu->arch.host_fpregs); @@ -461,7 +464,6 @@ static void __vcpu_run(struct kvm_vcpu *vcpu) local_irq_disable(); kvm_guest_enter(); local_irq_enable(); - gmap_enable(vcpu->arch.gmap); VCPU_EVENT(vcpu, 6, "entering sie flags %x", atomic_read(&vcpu->arch.sie_block->cpuflags)); if (sie64a(vcpu->arch.sie_block, vcpu->arch.guest_gprs)) { @@ -470,7 +472,6 @@ static void __vcpu_run(struct kvm_vcpu *vcpu) } VCPU_EVENT(vcpu, 6, "exit sie icptcode %d", vcpu->arch.sie_block->icptcode); - gmap_disable(vcpu->arch.gmap); local_irq_disable(); kvm_guest_exit(); local_irq_enable(); diff --git a/arch/s390/mm/pgtable.c b/arch/s390/mm/pgtable.c index 4d1f2bc..f69ff3c 100644 --- a/arch/s390/mm/pgtable.c +++ b/arch/s390/mm/pgtable.c @@ -160,6 +160,8 @@ struct gmap *gmap_alloc(struct mm_struct *mm) table = (unsigned long *) page_to_phys(page); crst_table_init(table, _REGION1_ENTRY_EMPTY); gmap->table = table; + gmap->asce = _ASCE_TYPE_REGION1 | _ASCE_TABLE_LENGTH | + _ASCE_USER_BITS | __pa(table); list_add(&gmap->list, &mm->context.gmap_list); return gmap; @@ -240,10 +242,6 @@ EXPORT_SYMBOL_GPL(gmap_free); */ void gmap_enable(struct gmap *gmap) { - /* Load primary space page table origin. */ - S390_lowcore.user_asce = _ASCE_TYPE_REGION1 | _ASCE_TABLE_LENGTH | - _ASCE_USER_BITS | __pa(gmap->table); - asm volatile("lctlg 1,1,%0\n" : : "m" (S390_lowcore.user_asce) ); S390_lowcore.gmap = (unsigned long) gmap; } EXPORT_SYMBOL_GPL(gmap_enable); @@ -254,10 +252,6 @@ EXPORT_SYMBOL_GPL(gmap_enable); */ void gmap_disable(struct gmap *gmap) { - /* Load primary space page table origin. */ - S390_lowcore.user_asce = - gmap->mm->context.asce_bits | __pa(gmap->mm->pgd); - asm volatile("lctlg 1,1,%0\n" : : "m" (S390_lowcore.user_asce) ); S390_lowcore.gmap = 0UL; } EXPORT_SYMBOL_GPL(gmap_disable); diff --git a/arch/um/Kconfig.x86 b/arch/um/Kconfig.x86 index d31ecf3..21bebe6 100644 --- a/arch/um/Kconfig.x86 +++ b/arch/um/Kconfig.x86 @@ -10,6 +10,10 @@ config CMPXCHG_LOCAL bool default n +config CMPXCHG_DOUBLE + bool + default n + source "arch/x86/Kconfig.cpu" endmenu diff --git a/arch/um/Makefile b/arch/um/Makefile index fab8121..c0f712c 100644 --- a/arch/um/Makefile +++ b/arch/um/Makefile @@ -41,7 +41,7 @@ KBUILD_CPPFLAGS += -I$(srctree)/$(ARCH_DIR)/sys-$(SUBARCH) KBUILD_CFLAGS += $(CFLAGS) $(CFLAGS-y) -D__arch_um__ -DSUBARCH=\"$(SUBARCH)\" \ $(ARCH_INCLUDE) $(MODE_INCLUDE) -Dvmap=kernel_vmap \ -Din6addr_loopback=kernel_in6addr_loopback \ - -Din6addr_any=kernel_in6addr_any + -Din6addr_any=kernel_in6addr_any -Dstrrchr=kernel_strrchr KBUILD_AFLAGS += $(ARCH_INCLUDE) diff --git a/arch/um/drivers/line.c b/arch/um/drivers/line.c index d51c404..364c8a1 100644 --- a/arch/um/drivers/line.c +++ b/arch/um/drivers/line.c @@ -399,8 +399,8 @@ int line_setup_irq(int fd, int input, int output, struct line *line, void *data) * is done under a spinlock. Checking whether the device is in use is * line->tty->count > 1, also under the spinlock. * - * tty->count serves to decide whether the device should be enabled or - * disabled on the host. If it's equal to 1, then we are doing the + * line->count serves to decide whether the device should be enabled or + * disabled on the host. If it's equal to 0, then we are doing the * first open or last close. Otherwise, open and close just return. */ @@ -414,16 +414,16 @@ int line_open(struct line *lines, struct tty_struct *tty) goto out_unlock; err = 0; - if (tty->count > 1) + if (line->count++) goto out_unlock; - spin_unlock(&line->count_lock); - + BUG_ON(tty->driver_data); tty->driver_data = line; line->tty = tty; + spin_unlock(&line->count_lock); err = enable_chan(line); - if (err) + if (err) /* line_close() will be called by our caller */ return err; INIT_DELAYED_WORK(&line->task, line_timer_cb); @@ -436,7 +436,7 @@ int line_open(struct line *lines, struct tty_struct *tty) chan_window_size(&line->chan_list, &tty->winsize.ws_row, &tty->winsize.ws_col); - return err; + return 0; out_unlock: spin_unlock(&line->count_lock); @@ -460,17 +460,16 @@ void line_close(struct tty_struct *tty, struct file * filp) flush_buffer(line); spin_lock(&line->count_lock); - if (!line->valid) - goto out_unlock; + BUG_ON(!line->valid); - if (tty->count > 1) + if (--line->count) goto out_unlock; - spin_unlock(&line->count_lock); - line->tty = NULL; tty->driver_data = NULL; + spin_unlock(&line->count_lock); + if (line->sigio) { unregister_winch(tty); line->sigio = 0; @@ -498,7 +497,7 @@ static int setup_one_line(struct line *lines, int n, char *init, int init_prio, spin_lock(&line->count_lock); - if (line->tty != NULL) { + if (line->count) { *error_out = "Device is already open"; goto out; } @@ -722,41 +721,53 @@ struct winch { int pid; struct tty_struct *tty; unsigned long stack; + struct work_struct work; }; -static void free_winch(struct winch *winch, int free_irq_ok) +static void __free_winch(struct work_struct *work) { - if (free_irq_ok) - free_irq(WINCH_IRQ, winch); - - list_del(&winch->list); + struct winch *winch = container_of(work, struct winch, work); + free_irq(WINCH_IRQ, winch); if (winch->pid != -1) os_kill_process(winch->pid, 1); - if (winch->fd != -1) - os_close_file(winch->fd); if (winch->stack != 0) free_stack(winch->stack, 0); kfree(winch); } +static void free_winch(struct winch *winch) +{ + int fd = winch->fd; + winch->fd = -1; + if (fd != -1) + os_close_file(fd); + list_del(&winch->list); + __free_winch(&winch->work); +} + static irqreturn_t winch_interrupt(int irq, void *data) { struct winch *winch = data; struct tty_struct *tty; struct line *line; + int fd = winch->fd; int err; char c; - if (winch->fd != -1) { - err = generic_read(winch->fd, &c, NULL); + if (fd != -1) { + err = generic_read(fd, &c, NULL); if (err < 0) { if (err != -EAGAIN) { + winch->fd = -1; + list_del(&winch->list); + os_close_file(fd); printk(KERN_ERR "winch_interrupt : " "read failed, errno = %d\n", -err); printk(KERN_ERR "fd %d is losing SIGWINCH " "support\n", winch->tty_fd); - free_winch(winch, 0); + INIT_WORK(&winch->work, __free_winch); + schedule_work(&winch->work); return IRQ_HANDLED; } goto out; @@ -828,7 +839,7 @@ static void unregister_winch(struct tty_struct *tty) list_for_each_safe(ele, next, &winch_handlers) { winch = list_entry(ele, struct winch, list); if (winch->tty == tty) { - free_winch(winch, 1); + free_winch(winch); break; } } @@ -844,7 +855,7 @@ static void winch_cleanup(void) list_for_each_safe(ele, next, &winch_handlers) { winch = list_entry(ele, struct winch, list); - free_winch(winch, 1); + free_winch(winch); } spin_unlock(&winch_handler_lock); diff --git a/arch/um/drivers/xterm.c b/arch/um/drivers/xterm.c index 8ac7146..2e1de57 100644 --- a/arch/um/drivers/xterm.c +++ b/arch/um/drivers/xterm.c @@ -123,6 +123,7 @@ static int xterm_open(int input, int output, int primary, void *d, err = -errno; printk(UM_KERN_ERR "xterm_open : unlink failed, errno = %d\n", errno); + close(fd); return err; } close(fd); diff --git a/arch/um/include/asm/ptrace-generic.h b/arch/um/include/asm/ptrace-generic.h index ae084ad..1a7d275 100644 --- a/arch/um/include/asm/ptrace-generic.h +++ b/arch/um/include/asm/ptrace-generic.h @@ -42,10 +42,6 @@ extern long subarch_ptrace(struct task_struct *child, long request, unsigned long addr, unsigned long data); extern unsigned long getreg(struct task_struct *child, int regno); extern int putreg(struct task_struct *child, int regno, unsigned long value); -extern int get_fpregs(struct user_i387_struct __user *buf, - struct task_struct *child); -extern int set_fpregs(struct user_i387_struct __user *buf, - struct task_struct *child); extern int arch_copy_tls(struct task_struct *new); extern void clear_flushed_tls(struct task_struct *task); diff --git a/arch/um/include/shared/line.h b/arch/um/include/shared/line.h index 72f4f25..63df3ca 100644 --- a/arch/um/include/shared/line.h +++ b/arch/um/include/shared/line.h @@ -33,6 +33,7 @@ struct line_driver { struct line { struct tty_struct *tty; spinlock_t count_lock; + unsigned long count; int valid; char *init_str; diff --git a/arch/um/include/shared/registers.h b/arch/um/include/shared/registers.h index b0b4589..f1e0aa5 100644 --- a/arch/um/include/shared/registers.h +++ b/arch/um/include/shared/registers.h @@ -16,7 +16,7 @@ extern int restore_fpx_registers(int pid, unsigned long *fp_regs); extern int save_registers(int pid, struct uml_pt_regs *regs); extern int restore_registers(int pid, struct uml_pt_regs *regs); extern int init_registers(int pid); -extern void get_safe_registers(unsigned long *regs); +extern void get_safe_registers(unsigned long *regs, unsigned long *fp_regs); extern unsigned long get_thread_reg(int reg, jmp_buf *buf); extern int get_fp_registers(int pid, unsigned long *regs); extern int put_fp_registers(int pid, unsigned long *regs); diff --git a/arch/um/kernel/process.c b/arch/um/kernel/process.c index fab4371..21c1ae7 100644 --- a/arch/um/kernel/process.c +++ b/arch/um/kernel/process.c @@ -202,7 +202,7 @@ int copy_thread(unsigned long clone_flags, unsigned long sp, arch_copy_thread(¤t->thread.arch, &p->thread.arch); } else { - get_safe_registers(p->thread.regs.regs.gp); + get_safe_registers(p->thread.regs.regs.gp, p->thread.regs.regs.fp); p->thread.request.u.thread = current->thread.request.u.thread; handler = new_thread_handler; } diff --git a/arch/um/kernel/ptrace.c b/arch/um/kernel/ptrace.c index 701b672..c9da32b 100644 --- a/arch/um/kernel/ptrace.c +++ b/arch/um/kernel/ptrace.c @@ -50,23 +50,11 @@ long arch_ptrace(struct task_struct *child, long request, void __user *vp = p; switch (request) { - /* read word at location addr. */ - case PTRACE_PEEKTEXT: - case PTRACE_PEEKDATA: - ret = generic_ptrace_peekdata(child, addr, data); - break; - /* read the word at location addr in the USER area. */ case PTRACE_PEEKUSR: ret = peek_user(child, addr, data); break; - /* write the word at location addr. */ - case PTRACE_POKETEXT: - case PTRACE_POKEDATA: - ret = generic_ptrace_pokedata(child, addr, data); - break; - /* write the word at location addr in the USER area */ case PTRACE_POKEUSR: ret = poke_user(child, addr, data); @@ -107,16 +95,6 @@ long arch_ptrace(struct task_struct *child, long request, break; } #endif -#ifdef PTRACE_GETFPREGS - case PTRACE_GETFPREGS: /* Get the child FPU state. */ - ret = get_fpregs(vp, child); - break; -#endif -#ifdef PTRACE_SETFPREGS - case PTRACE_SETFPREGS: /* Set the child FPU state. */ - ret = set_fpregs(vp, child); - break; -#endif case PTRACE_GET_THREAD_AREA: ret = ptrace_get_thread_area(child, addr, vp); break; @@ -154,12 +132,6 @@ long arch_ptrace(struct task_struct *child, long request, break; } #endif -#ifdef PTRACE_ARCH_PRCTL - case PTRACE_ARCH_PRCTL: - /* XXX Calls ptrace on the host - needs some SMP thinking */ - ret = arch_prctl(child, data, (void __user *) addr); - break; -#endif default: ret = ptrace_request(child, request, addr, data); if (ret == -EIO) diff --git a/arch/um/os-Linux/registers.c b/arch/um/os-Linux/registers.c index 830fe6a..b866b9e 100644 --- a/arch/um/os-Linux/registers.c +++ b/arch/um/os-Linux/registers.c @@ -8,6 +8,8 @@ #include <string.h> #include <sys/ptrace.h> #include "sysdep/ptrace.h" +#include "sysdep/ptrace_user.h" +#include "registers.h" int save_registers(int pid, struct uml_pt_regs *regs) { @@ -32,6 +34,7 @@ int restore_registers(int pid, struct uml_pt_regs *regs) /* This is set once at boot time and not changed thereafter */ static unsigned long exec_regs[MAX_REG_NR]; +static unsigned long exec_fp_regs[FP_SIZE]; int init_registers(int pid) { @@ -42,10 +45,14 @@ int init_registers(int pid) return -errno; arch_init_registers(pid); + get_fp_registers(pid, exec_fp_regs); return 0; } -void get_safe_registers(unsigned long *regs) +void get_safe_registers(unsigned long *regs, unsigned long *fp_regs) { memcpy(regs, exec_regs, sizeof(exec_regs)); + + if (fp_regs) + memcpy(fp_regs, exec_fp_regs, sizeof(exec_fp_regs)); } diff --git a/arch/um/os-Linux/skas/mem.c b/arch/um/os-Linux/skas/mem.c index d261f17..e771398 100644 --- a/arch/um/os-Linux/skas/mem.c +++ b/arch/um/os-Linux/skas/mem.c @@ -39,7 +39,7 @@ static unsigned long syscall_regs[MAX_REG_NR]; static int __init init_syscall_regs(void) { - get_safe_registers(syscall_regs); + get_safe_registers(syscall_regs, NULL); syscall_regs[REGS_IP_INDEX] = STUB_CODE + ((unsigned long) &batch_syscall_stub - (unsigned long) &__syscall_stub_start); diff --git a/arch/um/os-Linux/skas/process.c b/arch/um/os-Linux/skas/process.c index d6e0a22..dee0e8c 100644 --- a/arch/um/os-Linux/skas/process.c +++ b/arch/um/os-Linux/skas/process.c @@ -373,6 +373,9 @@ void userspace(struct uml_pt_regs *regs) if (ptrace(PTRACE_SETREGS, pid, 0, regs->gp)) fatal_sigsegv(); + if (put_fp_registers(pid, regs->fp)) + fatal_sigsegv(); + /* Now we set local_using_sysemu to be used for one loop */ local_using_sysemu = get_using_sysemu(); @@ -399,6 +402,12 @@ void userspace(struct uml_pt_regs *regs) fatal_sigsegv(); } + if (get_fp_registers(pid, regs->fp)) { + printk(UM_KERN_ERR "userspace - get_fp_registers failed, " + "errno = %d\n", errno); + fatal_sigsegv(); + } + UPT_SYSCALL_NR(regs) = -1; /* Assume: It's not a syscall */ if (WIFSTOPPED(status)) { @@ -457,10 +466,11 @@ void userspace(struct uml_pt_regs *regs) } static unsigned long thread_regs[MAX_REG_NR]; +static unsigned long thread_fp_regs[FP_SIZE]; static int __init init_thread_regs(void) { - get_safe_registers(thread_regs); + get_safe_registers(thread_regs, thread_fp_regs); /* Set parent's instruction pointer to start of clone-stub */ thread_regs[REGS_IP_INDEX] = STUB_CODE + (unsigned long) stub_clone_handler - @@ -503,6 +513,13 @@ int copy_context_skas0(unsigned long new_stack, int pid) return err; } + err = put_fp_registers(pid, thread_fp_regs); + if (err < 0) { + printk(UM_KERN_ERR "copy_context_skas0 : put_fp_registers " + "failed, pid = %d, err = %d\n", pid, err); + return err; + } + /* set a well known return code for detection of child write failure */ child_data->err = 12345678; diff --git a/arch/um/sys-i386/asm/ptrace.h b/arch/um/sys-i386/asm/ptrace.h index 0273e4d..5d2a591 100644 --- a/arch/um/sys-i386/asm/ptrace.h +++ b/arch/um/sys-i386/asm/ptrace.h @@ -42,11 +42,6 @@ */ struct user_desc; -extern int get_fpxregs(struct user_fxsr_struct __user *buf, - struct task_struct *child); -extern int set_fpxregs(struct user_fxsr_struct __user *buf, - struct task_struct *tsk); - extern int ptrace_get_thread_area(struct task_struct *child, int idx, struct user_desc __user *user_desc); diff --git a/arch/um/sys-i386/ptrace.c b/arch/um/sys-i386/ptrace.c index d23b2d3..3375c27 100644 --- a/arch/um/sys-i386/ptrace.c +++ b/arch/um/sys-i386/ptrace.c @@ -145,7 +145,7 @@ int peek_user(struct task_struct *child, long addr, long data) return put_user(tmp, (unsigned long __user *) data); } -int get_fpregs(struct user_i387_struct __user *buf, struct task_struct *child) +static int get_fpregs(struct user_i387_struct __user *buf, struct task_struct *child) { int err, n, cpu = ((struct thread_info *) child->stack)->cpu; struct user_i387_struct fpregs; @@ -161,7 +161,7 @@ int get_fpregs(struct user_i387_struct __user *buf, struct task_struct *child) return n; } -int set_fpregs(struct user_i387_struct __user *buf, struct task_struct *child) +static int set_fpregs(struct user_i387_struct __user *buf, struct task_struct *child) { int n, cpu = ((struct thread_info *) child->stack)->cpu; struct user_i387_struct fpregs; @@ -174,7 +174,7 @@ int set_fpregs(struct user_i387_struct __user *buf, struct task_struct *child) (unsigned long *) &fpregs); } -int get_fpxregs(struct user_fxsr_struct __user *buf, struct task_struct *child) +static int get_fpxregs(struct user_fxsr_struct __user *buf, struct task_struct *child) { int err, n, cpu = ((struct thread_info *) child->stack)->cpu; struct user_fxsr_struct fpregs; @@ -190,7 +190,7 @@ int get_fpxregs(struct user_fxsr_struct __user *buf, struct task_struct *child) return n; } -int set_fpxregs(struct user_fxsr_struct __user *buf, struct task_struct *child) +static int set_fpxregs(struct user_fxsr_struct __user *buf, struct task_struct *child) { int n, cpu = ((struct thread_info *) child->stack)->cpu; struct user_fxsr_struct fpregs; @@ -206,5 +206,23 @@ int set_fpxregs(struct user_fxsr_struct __user *buf, struct task_struct *child) long subarch_ptrace(struct task_struct *child, long request, unsigned long addr, unsigned long data) { - return -EIO; + int ret = -EIO; + void __user *datap = (void __user *) data; + switch (request) { + case PTRACE_GETFPREGS: /* Get the child FPU state. */ + ret = get_fpregs(datap, child); + break; + case PTRACE_SETFPREGS: /* Set the child FPU state. */ + ret = set_fpregs(datap, child); + break; + case PTRACE_GETFPXREGS: /* Get the child FPU state. */ + ret = get_fpxregs(datap, child); + break; + case PTRACE_SETFPXREGS: /* Set the child FPU state. */ + ret = set_fpxregs(datap, child); + break; + default: + ret = -EIO; + } + return ret; } diff --git a/arch/um/sys-i386/shared/sysdep/ptrace.h b/arch/um/sys-i386/shared/sysdep/ptrace.h index d50e62e..c398a50 100644 --- a/arch/um/sys-i386/shared/sysdep/ptrace.h +++ b/arch/um/sys-i386/shared/sysdep/ptrace.h @@ -53,6 +53,7 @@ extern int sysemu_supported; struct uml_pt_regs { unsigned long gp[MAX_REG_NR]; + unsigned long fp[HOST_FPX_SIZE]; struct faultinfo faultinfo; long syscall; int is_user; diff --git a/arch/um/sys-x86_64/ptrace.c b/arch/um/sys-x86_64/ptrace.c index f436136..4005506 100644 --- a/arch/um/sys-x86_64/ptrace.c +++ b/arch/um/sys-x86_64/ptrace.c @@ -145,7 +145,7 @@ int is_syscall(unsigned long addr) return instr == 0x050f; } -int get_fpregs(struct user_i387_struct __user *buf, struct task_struct *child) +static int get_fpregs(struct user_i387_struct __user *buf, struct task_struct *child) { int err, n, cpu = ((struct thread_info *) child->stack)->cpu; long fpregs[HOST_FP_SIZE]; @@ -162,7 +162,7 @@ int get_fpregs(struct user_i387_struct __user *buf, struct task_struct *child) return n; } -int set_fpregs(struct user_i387_struct __user *buf, struct task_struct *child) +static int set_fpregs(struct user_i387_struct __user *buf, struct task_struct *child) { int n, cpu = ((struct thread_info *) child->stack)->cpu; long fpregs[HOST_FP_SIZE]; @@ -182,12 +182,16 @@ long subarch_ptrace(struct task_struct *child, long request, void __user *datap = (void __user *) data; switch (request) { - case PTRACE_GETFPXREGS: /* Get the child FPU state. */ + case PTRACE_GETFPREGS: /* Get the child FPU state. */ ret = get_fpregs(datap, child); break; - case PTRACE_SETFPXREGS: /* Set the child FPU state. */ + case PTRACE_SETFPREGS: /* Set the child FPU state. */ ret = set_fpregs(datap, child); break; + case PTRACE_ARCH_PRCTL: + /* XXX Calls ptrace on the host - needs some SMP thinking */ + ret = arch_prctl(child, data, (void __user *) addr); + break; } return ret; diff --git a/arch/um/sys-x86_64/shared/sysdep/ptrace.h b/arch/um/sys-x86_64/shared/sysdep/ptrace.h index fdba545..8ee8f8e 100644 --- a/arch/um/sys-x86_64/shared/sysdep/ptrace.h +++ b/arch/um/sys-x86_64/shared/sysdep/ptrace.h @@ -85,6 +85,7 @@ struct uml_pt_regs { unsigned long gp[MAX_REG_NR]; + unsigned long fp[HOST_FP_SIZE]; struct faultinfo faultinfo; long syscall; int is_user; diff --git a/arch/x86/include/asm/alternative-asm.h b/arch/x86/include/asm/alternative-asm.h index 4554cc6..091508b 100644 --- a/arch/x86/include/asm/alternative-asm.h +++ b/arch/x86/include/asm/alternative-asm.h @@ -16,7 +16,6 @@ #endif .macro altinstruction_entry orig alt feature orig_len alt_len - .align 8 .long \orig - . .long \alt - . .word \feature diff --git a/arch/x86/include/asm/alternative.h b/arch/x86/include/asm/alternative.h index 23fb6d7..37ad100 100644 --- a/arch/x86/include/asm/alternative.h +++ b/arch/x86/include/asm/alternative.h @@ -48,9 +48,6 @@ struct alt_instr { u16 cpuid; /* cpuid bit set for replacement */ u8 instrlen; /* length of original instruction */ u8 replacementlen; /* length of new instruction, <= instrlen */ -#ifdef CONFIG_X86_64 - u32 pad2; -#endif }; extern void alternative_instructions(void); @@ -83,7 +80,6 @@ static inline int alternatives_text_reserved(void *start, void *end) \ "661:\n\t" oldinstr "\n662:\n" \ ".section .altinstructions,\"a\"\n" \ - _ASM_ALIGN "\n" \ " .long 661b - .\n" /* label */ \ " .long 663f - .\n" /* new instruction */ \ " .word " __stringify(feature) "\n" /* feature bit */ \ diff --git a/arch/x86/include/asm/cpufeature.h b/arch/x86/include/asm/cpufeature.h index 4258aac..88b23a4 100644 --- a/arch/x86/include/asm/cpufeature.h +++ b/arch/x86/include/asm/cpufeature.h @@ -332,7 +332,6 @@ static __always_inline __pure bool __static_cpu_has(u16 bit) asm goto("1: jmp %l[t_no]\n" "2:\n" ".section .altinstructions,\"a\"\n" - _ASM_ALIGN "\n" " .long 1b - .\n" " .long 0\n" /* no replacement */ " .word %P0\n" /* feature bit */ @@ -350,7 +349,6 @@ static __always_inline __pure bool __static_cpu_has(u16 bit) asm volatile("1: movb $0,%0\n" "2:\n" ".section .altinstructions,\"a\"\n" - _ASM_ALIGN "\n" " .long 1b - .\n" " .long 3f - .\n" " .word %P1\n" /* feature bit */ diff --git a/arch/x86/kvm/emulate.c b/arch/x86/kvm/emulate.c index 6f08bc9..8b4cc5f 100644 --- a/arch/x86/kvm/emulate.c +++ b/arch/x86/kvm/emulate.c @@ -3603,7 +3603,7 @@ done_prefixes: break; case Src2CL: ctxt->src2.bytes = 1; - ctxt->src2.val = ctxt->regs[VCPU_REGS_RCX] & 0x8; + ctxt->src2.val = ctxt->regs[VCPU_REGS_RCX] & 0xff; break; case Src2ImmByte: rc = decode_imm(ctxt, &ctxt->src2, 1, true); diff --git a/arch/x86/kvm/mmu.c b/arch/x86/kvm/mmu.c index 1c5b693..8e8da79 100644 --- a/arch/x86/kvm/mmu.c +++ b/arch/x86/kvm/mmu.c @@ -400,7 +400,8 @@ static u64 __update_clear_spte_slow(u64 *sptep, u64 spte) /* xchg acts as a barrier before the setting of the high bits */ orig.spte_low = xchg(&ssptep->spte_low, sspte.spte_low); - orig.spte_high = ssptep->spte_high = sspte.spte_high; + orig.spte_high = ssptep->spte_high; + ssptep->spte_high = sspte.spte_high; count_spte_clear(sptep, spte); return orig.spte; diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index 20a6142..3dd53f9 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -1721,10 +1721,8 @@ void __init xen_setup_machphys_mapping(void) machine_to_phys_nr = MACH2PHYS_NR_ENTRIES; } #ifdef CONFIG_X86_32 - if ((machine_to_phys_mapping + machine_to_phys_nr) - < machine_to_phys_mapping) - machine_to_phys_nr = (unsigned long *)NULL - - machine_to_phys_mapping; + WARN_ON((machine_to_phys_mapping + (machine_to_phys_nr - 1)) + < machine_to_phys_mapping); #endif } diff --git a/arch/x86/xen/setup.c b/arch/x86/xen/setup.c index c3b8d44..46d6d21 100644 --- a/arch/x86/xen/setup.c +++ b/arch/x86/xen/setup.c @@ -306,10 +306,12 @@ char * __init xen_memory_setup(void) sanitize_e820_map(e820.map, ARRAY_SIZE(e820.map), &e820.nr_map); extra_limit = xen_get_max_pages(); - if (extra_limit >= max_pfn) - extra_pages = extra_limit - max_pfn; - else - extra_pages = 0; + if (max_pfn + extra_pages > extra_limit) { + if (extra_limit > max_pfn) + extra_pages = extra_limit - max_pfn; + else + extra_pages = 0; + } extra_pages += xen_return_unused_memory(xen_start_info->nr_pages, &e820); diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c index d4fc6d4..041d4fe 100644 --- a/arch/x86/xen/smp.c +++ b/arch/x86/xen/smp.c @@ -532,7 +532,6 @@ static void __init xen_hvm_smp_prepare_cpus(unsigned int max_cpus) WARN_ON(xen_smp_intr_init(0)); xen_init_lock_cpu(0); - xen_init_spinlocks(); } static int __cpuinit xen_hvm_cpu_up(unsigned int cpu) diff --git a/arch/x86/xen/time.c b/arch/x86/xen/time.c index 5158c50..163b467 100644 --- a/arch/x86/xen/time.c +++ b/arch/x86/xen/time.c @@ -168,9 +168,10 @@ cycle_t xen_clocksource_read(void) struct pvclock_vcpu_time_info *src; cycle_t ret; - src = &get_cpu_var(xen_vcpu)->time; + preempt_disable_notrace(); + src = &__get_cpu_var(xen_vcpu)->time; ret = pvclock_clocksource_read(src); - put_cpu_var(xen_vcpu); + preempt_enable_notrace(); return ret; } diff --git a/block/blk-cgroup.c b/block/blk-cgroup.c index bcaf16e..b596e54 100644 --- a/block/blk-cgroup.c +++ b/block/blk-cgroup.c @@ -785,10 +785,10 @@ static int blkio_policy_parse_and_set(char *buf, { char *s[4], *p, *major_s = NULL, *minor_s = NULL; int ret; - unsigned long major, minor, temp; + unsigned long major, minor; int i = 0; dev_t dev; - u64 bps, iops; + u64 temp; memset(s, 0, sizeof(s)); @@ -826,20 +826,23 @@ static int blkio_policy_parse_and_set(char *buf, dev = MKDEV(major, minor); - ret = blkio_check_dev_num(dev); + ret = strict_strtoull(s[1], 10, &temp); if (ret) - return ret; + return -EINVAL; - newpn->dev = dev; + /* For rule removal, do not check for device presence. */ + if (temp) { + ret = blkio_check_dev_num(dev); + if (ret) + return ret; + } - if (s[1] == NULL) - return -EINVAL; + newpn->dev = dev; switch (plid) { case BLKIO_POLICY_PROP: - ret = strict_strtoul(s[1], 10, &temp); - if (ret || (temp < BLKIO_WEIGHT_MIN && temp > 0) || - temp > BLKIO_WEIGHT_MAX) + if ((temp < BLKIO_WEIGHT_MIN && temp > 0) || + temp > BLKIO_WEIGHT_MAX) return -EINVAL; newpn->plid = plid; @@ -850,26 +853,18 @@ static int blkio_policy_parse_and_set(char *buf, switch(fileid) { case BLKIO_THROTL_read_bps_device: case BLKIO_THROTL_write_bps_device: - ret = strict_strtoull(s[1], 10, &bps); - if (ret) - return -EINVAL; - newpn->plid = plid; newpn->fileid = fileid; - newpn->val.bps = bps; + newpn->val.bps = temp; break; case BLKIO_THROTL_read_iops_device: case BLKIO_THROTL_write_iops_device: - ret = strict_strtoull(s[1], 10, &iops); - if (ret) - return -EINVAL; - - if (iops > THROTL_IOPS_MAX) + if (temp > THROTL_IOPS_MAX) return -EINVAL; newpn->plid = plid; newpn->fileid = fileid; - newpn->val.iops = (unsigned int)iops; + newpn->val.iops = (unsigned int)temp; break; } break; diff --git a/block/blk-core.c b/block/blk-core.c index 90e1ffd..b2ed78a 100644 --- a/block/blk-core.c +++ b/block/blk-core.c @@ -1167,7 +1167,7 @@ static bool bio_attempt_front_merge(struct request_queue *q, * true if merge was successful, otherwise false. */ static bool attempt_plug_merge(struct task_struct *tsk, struct request_queue *q, - struct bio *bio) + struct bio *bio, unsigned int *request_count) { struct blk_plug *plug; struct request *rq; @@ -1176,10 +1176,13 @@ static bool attempt_plug_merge(struct task_struct *tsk, struct request_queue *q, plug = tsk->plug; if (!plug) goto out; + *request_count = 0; list_for_each_entry_reverse(rq, &plug->list, queuelist) { int el_ret; + (*request_count)++; + if (rq->q != q) continue; @@ -1219,6 +1222,7 @@ static int __make_request(struct request_queue *q, struct bio *bio) struct blk_plug *plug; int el_ret, rw_flags, where = ELEVATOR_INSERT_SORT; struct request *req; + unsigned int request_count = 0; /* * low level driver can indicate that it wants pages above a @@ -1237,7 +1241,7 @@ static int __make_request(struct request_queue *q, struct bio *bio) * Check if we can merge with the plugged list before grabbing * any locks. */ - if (attempt_plug_merge(current, q, bio)) + if (attempt_plug_merge(current, q, bio, &request_count)) goto out; spin_lock_irq(q->queue_lock); @@ -1302,11 +1306,10 @@ get_rq: if (__rq->q != q) plug->should_sort = 1; } + if (request_count >= BLK_MAX_REQUEST_COUNT) + blk_flush_plug_list(plug, false); list_add_tail(&req->queuelist, &plug->list); - plug->count++; drive_stat_acct(req, 1); - if (plug->count >= BLK_MAX_REQUEST_COUNT) - blk_flush_plug_list(plug, false); } else { spin_lock_irq(q->queue_lock); add_acct_request(q, req, where); @@ -2634,7 +2637,6 @@ void blk_start_plug(struct blk_plug *plug) INIT_LIST_HEAD(&plug->list); INIT_LIST_HEAD(&plug->cb_list); plug->should_sort = 0; - plug->count = 0; /* * If this is a nested plug, don't actually assign it. It will be @@ -2718,7 +2720,6 @@ void blk_flush_plug_list(struct blk_plug *plug, bool from_schedule) return; list_splice_init(&plug->list, &list); - plug->count = 0; if (plug->should_sort) { list_sort(NULL, &list, plug_rq_cmp); diff --git a/block/blk-softirq.c b/block/blk-softirq.c index 58340d0..1366a89 100644 --- a/block/blk-softirq.c +++ b/block/blk-softirq.c @@ -115,7 +115,7 @@ void __blk_complete_request(struct request *req) /* * Select completion CPU */ - if (test_bit(QUEUE_FLAG_SAME_COMP, &q->queue_flags) && req->cpu != -1) { + if (req->cpu != -1) { ccpu = req->cpu; if (!test_bit(QUEUE_FLAG_SAME_FORCE, &q->queue_flags)) { ccpu = blk_cpu_to_group(ccpu); diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c index 0ee17b5..e681805 100644 --- a/block/blk-sysfs.c +++ b/block/blk-sysfs.c @@ -258,11 +258,13 @@ queue_rq_affinity_store(struct request_queue *q, const char *page, size_t count) ret = queue_var_store(&val, page, count); spin_lock_irq(q->queue_lock); - if (val) { + if (val == 2) { queue_flag_set(QUEUE_FLAG_SAME_COMP, q); - if (val == 2) - queue_flag_set(QUEUE_FLAG_SAME_FORCE, q); - } else { + queue_flag_set(QUEUE_FLAG_SAME_FORCE, q); + } else if (val == 1) { + queue_flag_set(QUEUE_FLAG_SAME_COMP, q); + queue_flag_clear(QUEUE_FLAG_SAME_FORCE, q); + } else if (val == 0) { queue_flag_clear(QUEUE_FLAG_SAME_COMP, q); queue_flag_clear(QUEUE_FLAG_SAME_FORCE, q); } diff --git a/block/cfq-iosched.c b/block/cfq-iosched.c index a33bd43..16ace89 100644 --- a/block/cfq-iosched.c +++ b/block/cfq-iosched.c @@ -130,8 +130,8 @@ struct cfq_queue { unsigned long slice_end; long slice_resid; - /* pending metadata requests */ - int meta_pending; + /* pending priority requests */ + int prio_pending; /* number of requests that are on the dispatch list or inside driver */ int dispatched; @@ -684,8 +684,8 @@ cfq_choose_req(struct cfq_data *cfqd, struct request *rq1, struct request *rq2, if (rq_is_sync(rq1) != rq_is_sync(rq2)) return rq_is_sync(rq1) ? rq1 : rq2; - if ((rq1->cmd_flags ^ rq2->cmd_flags) & REQ_META) - return rq1->cmd_flags & REQ_META ? rq1 : rq2; + if ((rq1->cmd_flags ^ rq2->cmd_flags) & REQ_PRIO) + return rq1->cmd_flags & REQ_PRIO ? rq1 : rq2; s1 = blk_rq_pos(rq1); s2 = blk_rq_pos(rq2); @@ -1612,9 +1612,9 @@ static void cfq_remove_request(struct request *rq) cfqq->cfqd->rq_queued--; cfq_blkiocg_update_io_remove_stats(&(RQ_CFQG(rq))->blkg, rq_data_dir(rq), rq_is_sync(rq)); - if (rq->cmd_flags & REQ_META) { - WARN_ON(!cfqq->meta_pending); - cfqq->meta_pending--; + if (rq->cmd_flags & REQ_PRIO) { + WARN_ON(!cfqq->prio_pending); + cfqq->prio_pending--; } } @@ -3372,7 +3372,7 @@ cfq_should_preempt(struct cfq_data *cfqd, struct cfq_queue *new_cfqq, * So both queues are sync. Let the new request get disk time if * it's a metadata request and the current queue is doing regular IO. */ - if ((rq->cmd_flags & REQ_META) && !cfqq->meta_pending) + if ((rq->cmd_flags & REQ_PRIO) && !cfqq->prio_pending) return true; /* @@ -3439,8 +3439,8 @@ cfq_rq_enqueued(struct cfq_data *cfqd, struct cfq_queue *cfqq, struct cfq_io_context *cic = RQ_CIC(rq); cfqd->rq_queued++; - if (rq->cmd_flags & REQ_META) - cfqq->meta_pending++; + if (rq->cmd_flags & REQ_PRIO) + cfqq->prio_pending++; cfq_update_io_thinktime(cfqd, cfqq, cic); cfq_update_io_seektime(cfqd, cfqq, rq); diff --git a/drivers/acpi/acpica/acconfig.h b/drivers/acpi/acpica/acconfig.h index bc533dd..f895a24 100644 --- a/drivers/acpi/acpica/acconfig.h +++ b/drivers/acpi/acpica/acconfig.h @@ -121,7 +121,7 @@ /* Maximum sleep allowed via Sleep() operator */ -#define ACPI_MAX_SLEEP 20000 /* Two seconds */ +#define ACPI_MAX_SLEEP 2000 /* Two seconds */ /****************************************************************************** * diff --git a/drivers/acpi/apei/Kconfig b/drivers/acpi/apei/Kconfig index c34aa51..e3f4787 100644 --- a/drivers/acpi/apei/Kconfig +++ b/drivers/acpi/apei/Kconfig @@ -13,6 +13,7 @@ config ACPI_APEI_GHES bool "APEI Generic Hardware Error Source" depends on ACPI_APEI && X86 select ACPI_HED + select IRQ_WORK select LLIST select GENERIC_ALLOCATOR help diff --git a/drivers/acpi/apei/apei-base.c b/drivers/acpi/apei/apei-base.c index 8041248..6154036 100644 --- a/drivers/acpi/apei/apei-base.c +++ b/drivers/acpi/apei/apei-base.c @@ -618,7 +618,7 @@ int apei_osc_setup(void) }; capbuf[OSC_QUERY_TYPE] = OSC_QUERY_ENABLE; - capbuf[OSC_SUPPORT_TYPE] = 0; + capbuf[OSC_SUPPORT_TYPE] = 1; capbuf[OSC_CONTROL_TYPE] = 0; if (ACPI_FAILURE(acpi_get_handle(NULL, "\\_SB", &handle)) diff --git a/drivers/base/power/clock_ops.c b/drivers/base/power/clock_ops.c index 2c18d58..b97294e 100644 --- a/drivers/base/power/clock_ops.c +++ b/drivers/base/power/clock_ops.c @@ -42,6 +42,22 @@ static struct pm_clk_data *__to_pcd(struct device *dev) } /** + * pm_clk_acquire - Acquire a device clock. + * @dev: Device whose clock is to be acquired. + * @ce: PM clock entry corresponding to the clock. + */ +static void pm_clk_acquire(struct device *dev, struct pm_clock_entry *ce) +{ + ce->clk = clk_get(dev, ce->con_id); + if (IS_ERR(ce->clk)) { + ce->status = PCE_STATUS_ERROR; + } else { + ce->status = PCE_STATUS_ACQUIRED; + dev_dbg(dev, "Clock %s managed by runtime PM.\n", ce->con_id); + } +} + +/** * pm_clk_add - Start using a device clock for power management. * @dev: Device whose clock is going to be used for power management. * @con_id: Connection ID of the clock. @@ -73,6 +89,8 @@ int pm_clk_add(struct device *dev, const char *con_id) } } + pm_clk_acquire(dev, ce); + spin_lock_irq(&pcd->lock); list_add_tail(&ce->node, &pcd->clock_list); spin_unlock_irq(&pcd->lock); @@ -82,17 +100,12 @@ int pm_clk_add(struct device *dev, const char *con_id) /** * __pm_clk_remove - Destroy PM clock entry. * @ce: PM clock entry to destroy. - * - * This routine must be called under the spinlock protecting the PM list of - * clocks corresponding the the @ce's device. */ static void __pm_clk_remove(struct pm_clock_entry *ce) { if (!ce) return; - list_del(&ce->node); - if (ce->status < PCE_STATUS_ERROR) { if (ce->status == PCE_STATUS_ENABLED) clk_disable(ce->clk); @@ -126,18 +139,22 @@ void pm_clk_remove(struct device *dev, const char *con_id) spin_lock_irq(&pcd->lock); list_for_each_entry(ce, &pcd->clock_list, node) { - if (!con_id && !ce->con_id) { - __pm_clk_remove(ce); - break; - } else if (!con_id || !ce->con_id) { + if (!con_id && !ce->con_id) + goto remove; + else if (!con_id || !ce->con_id) continue; - } else if (!strcmp(con_id, ce->con_id)) { - __pm_clk_remove(ce); - break; - } + else if (!strcmp(con_id, ce->con_id)) + goto remove; } spin_unlock_irq(&pcd->lock); + return; + + remove: + list_del(&ce->node); + spin_unlock_irq(&pcd->lock); + + __pm_clk_remove(ce); } /** @@ -175,20 +192,27 @@ void pm_clk_destroy(struct device *dev) { struct pm_clk_data *pcd = __to_pcd(dev); struct pm_clock_entry *ce, *c; + struct list_head list; if (!pcd) return; dev->power.subsys_data = NULL; + INIT_LIST_HEAD(&list); spin_lock_irq(&pcd->lock); list_for_each_entry_safe_reverse(ce, c, &pcd->clock_list, node) - __pm_clk_remove(ce); + list_move(&ce->node, &list); spin_unlock_irq(&pcd->lock); kfree(pcd); + + list_for_each_entry_safe_reverse(ce, c, &list, node) { + list_del(&ce->node); + __pm_clk_remove(ce); + } } #endif /* CONFIG_PM */ @@ -196,23 +220,6 @@ void pm_clk_destroy(struct device *dev) #ifdef CONFIG_PM_RUNTIME /** - * pm_clk_acquire - Acquire a device clock. - * @dev: Device whose clock is to be acquired. - * @con_id: Connection ID of the clock. - */ -static void pm_clk_acquire(struct device *dev, - struct pm_clock_entry *ce) -{ - ce->clk = clk_get(dev, ce->con_id); - if (IS_ERR(ce->clk)) { - ce->status = PCE_STATUS_ERROR; - } else { - ce->status = PCE_STATUS_ACQUIRED; - dev_dbg(dev, "Clock %s managed by runtime PM.\n", ce->con_id); - } -} - -/** * pm_clk_suspend - Disable clocks in a device's PM clock list. * @dev: Device to disable the clocks for. */ @@ -230,9 +237,6 @@ int pm_clk_suspend(struct device *dev) spin_lock_irqsave(&pcd->lock, flags); list_for_each_entry_reverse(ce, &pcd->clock_list, node) { - if (ce->status == PCE_STATUS_NONE) - pm_clk_acquire(dev, ce); - if (ce->status < PCE_STATUS_ERROR) { clk_disable(ce->clk); ce->status = PCE_STATUS_ACQUIRED; @@ -262,9 +266,6 @@ int pm_clk_resume(struct device *dev) spin_lock_irqsave(&pcd->lock, flags); list_for_each_entry(ce, &pcd->clock_list, node) { - if (ce->status == PCE_STATUS_NONE) - pm_clk_acquire(dev, ce); - if (ce->status < PCE_STATUS_ERROR) { clk_enable(ce->clk); ce->status = PCE_STATUS_ENABLED; diff --git a/drivers/block/floppy.c b/drivers/block/floppy.c index 98de8f4..9955a53 100644 --- a/drivers/block/floppy.c +++ b/drivers/block/floppy.c @@ -4250,7 +4250,7 @@ static int __init floppy_init(void) use_virtual_dma = can_use_virtual_dma & 1; fdc_state[0].address = FDC1; if (fdc_state[0].address == -1) { - del_timer(&fd_timeout); + del_timer_sync(&fd_timeout); err = -ENODEV; goto out_unreg_region; } @@ -4261,7 +4261,7 @@ static int __init floppy_init(void) fdc = 0; /* reset fdc in case of unexpected interrupt */ err = floppy_grab_irq_and_dma(); if (err) { - del_timer(&fd_timeout); + del_timer_sync(&fd_timeout); err = -EBUSY; goto out_unreg_region; } @@ -4318,7 +4318,7 @@ static int __init floppy_init(void) user_reset_fdc(-1, FD_RESET_ALWAYS, false); } fdc = 0; - del_timer(&fd_timeout); + del_timer_sync(&fd_timeout); current_drive = 0; initialized = true; if (have_no_fdc) { @@ -4368,7 +4368,7 @@ out_unreg_blkdev: unregister_blkdev(FLOPPY_MAJOR, "fd"); out_put_disk: while (dr--) { - del_timer(&motor_off_timer[dr]); + del_timer_sync(&motor_off_timer[dr]); if (disks[dr]->queue) blk_cleanup_queue(disks[dr]->queue); put_disk(disks[dr]); diff --git a/drivers/block/xen-blkback/common.h b/drivers/block/xen-blkback/common.h index 9e40b28..00c57c9 100644 --- a/drivers/block/xen-blkback/common.h +++ b/drivers/block/xen-blkback/common.h @@ -46,7 +46,7 @@ #define DRV_PFX "xen-blkback:" #define DPRINTK(fmt, args...) \ - pr_debug(DRV_PFX "(%s:%d) " fmt ".\n", \ + pr_debug(DRV_PFX "(%s:%d) " fmt ".\n", \ __func__, __LINE__, ##args) diff --git a/drivers/block/xen-blkback/xenbus.c b/drivers/block/xen-blkback/xenbus.c index 3f129b4..5fd2010 100644 --- a/drivers/block/xen-blkback/xenbus.c +++ b/drivers/block/xen-blkback/xenbus.c @@ -590,7 +590,7 @@ static void frontend_changed(struct xenbus_device *dev, /* * Enforce precondition before potential leak point. - * blkif_disconnect() is idempotent. + * xen_blkif_disconnect() is idempotent. */ xen_blkif_disconnect(be->blkif); @@ -601,17 +601,17 @@ static void frontend_changed(struct xenbus_device *dev, break; case XenbusStateClosing: - xen_blkif_disconnect(be->blkif); xenbus_switch_state(dev, XenbusStateClosing); break; case XenbusStateClosed: + xen_blkif_disconnect(be->blkif); xenbus_switch_state(dev, XenbusStateClosed); if (xenbus_dev_is_online(dev)) break; /* fall through if not online */ case XenbusStateUnknown: - /* implies blkif_disconnect() via blkback_remove() */ + /* implies xen_blkif_disconnect() via xen_blkbk_remove() */ device_unregister(&dev->dev); break; diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c index 3ef4760..9cbac6b 100644 --- a/drivers/bluetooth/btusb.c +++ b/drivers/bluetooth/btusb.c @@ -72,9 +72,15 @@ static struct usb_device_id btusb_table[] = { /* Apple MacBookAir3,1, MacBookAir3,2 */ { USB_DEVICE(0x05ac, 0x821b) }, + /* Apple MacBookAir4,1 */ + { USB_DEVICE(0x05ac, 0x821f) }, + /* Apple MacBookPro8,2 */ { USB_DEVICE(0x05ac, 0x821a) }, + /* Apple MacMini5,1 */ + { USB_DEVICE(0x05ac, 0x8281) }, + /* AVM BlueFRITZ! USB v2.0 */ { USB_DEVICE(0x057c, 0x3800) }, diff --git a/drivers/bluetooth/btwilink.c b/drivers/bluetooth/btwilink.c index 65d27af..04d353f 100644 --- a/drivers/bluetooth/btwilink.c +++ b/drivers/bluetooth/btwilink.c @@ -125,6 +125,13 @@ static long st_receive(void *priv_data, struct sk_buff *skb) /* protocol structure registered with shared transport */ static struct st_proto_s ti_st_proto[MAX_BT_CHNL_IDS] = { { + .chnl_id = HCI_EVENT_PKT, /* HCI Events */ + .hdr_len = sizeof(struct hci_event_hdr), + .offset_len_in_hdr = offsetof(struct hci_event_hdr, plen), + .len_size = 1, /* sizeof(plen) in struct hci_event_hdr */ + .reserve = 8, + }, + { .chnl_id = HCI_ACLDATA_PKT, /* ACL */ .hdr_len = sizeof(struct hci_acl_hdr), .offset_len_in_hdr = offsetof(struct hci_acl_hdr, dlen), @@ -138,13 +145,6 @@ static struct st_proto_s ti_st_proto[MAX_BT_CHNL_IDS] = { .len_size = 1, /* sizeof(dlen) in struct hci_sco_hdr */ .reserve = 8, }, - { - .chnl_id = HCI_EVENT_PKT, /* HCI Events */ - .hdr_len = sizeof(struct hci_event_hdr), - .offset_len_in_hdr = offsetof(struct hci_event_hdr, plen), - .len_size = 1, /* sizeof(plen) in struct hci_event_hdr */ - .reserve = 8, - }, }; /* Called from HCI core to initialize the device */ @@ -240,7 +240,7 @@ static int ti_st_close(struct hci_dev *hdev) if (!test_and_clear_bit(HCI_RUNNING, &hdev->flags)) return 0; - for (i = 0; i < MAX_BT_CHNL_IDS; i++) { + for (i = MAX_BT_CHNL_IDS-1; i >= 0; i--) { err = st_unregister(&ti_st_proto[i]); if (err) BT_ERR("st_unregister(%d) failed with error %d", diff --git a/drivers/char/tpm/Kconfig b/drivers/char/tpm/Kconfig index f6595ab..fa567f1 100644 --- a/drivers/char/tpm/Kconfig +++ b/drivers/char/tpm/Kconfig @@ -43,6 +43,7 @@ config TCG_NSC config TCG_ATMEL tristate "Atmel TPM Interface" + depends on PPC64 || HAS_IOPORT ---help--- If you have a TPM security chip from Atmel say Yes and it will be accessible from within Linux. To compile this driver diff --git a/drivers/char/tpm/tpm.c b/drivers/char/tpm/tpm.c index caf8012..9ca5c02 100644 --- a/drivers/char/tpm/tpm.c +++ b/drivers/char/tpm/tpm.c @@ -383,6 +383,9 @@ static ssize_t tpm_transmit(struct tpm_chip *chip, const char *buf, u32 count, ordinal; unsigned long stop; + if (bufsiz > TPM_BUFSIZE) + bufsiz = TPM_BUFSIZE; + count = be32_to_cpu(*((__be32 *) (buf + 2))); ordinal = be32_to_cpu(*((__be32 *) (buf + 6))); if (count == 0) @@ -1102,6 +1105,7 @@ ssize_t tpm_read(struct file *file, char __user *buf, { struct tpm_chip *chip = file->private_data; ssize_t ret_size; + int rc; del_singleshot_timer_sync(&chip->user_read_timer); flush_work_sync(&chip->work); @@ -1112,8 +1116,11 @@ ssize_t tpm_read(struct file *file, char __user *buf, ret_size = size; mutex_lock(&chip->buffer_mutex); - if (copy_to_user(buf, chip->data_buffer, ret_size)) + rc = copy_to_user(buf, chip->data_buffer, ret_size); + memset(chip->data_buffer, 0, ret_size); + if (rc) ret_size = -EFAULT; + mutex_unlock(&chip->buffer_mutex); } diff --git a/drivers/char/tpm/tpm_nsc.c b/drivers/char/tpm/tpm_nsc.c index 82facc9..4d24648 100644 --- a/drivers/char/tpm/tpm_nsc.c +++ b/drivers/char/tpm/tpm_nsc.c @@ -396,8 +396,6 @@ static void __exit cleanup_nsc(void) if (pdev) { tpm_nsc_remove(&pdev->dev); platform_device_unregister(pdev); - kfree(pdev); - pdev = NULL; } platform_driver_unregister(&nsc_drv); diff --git a/drivers/cpufreq/pcc-cpufreq.c b/drivers/cpufreq/pcc-cpufreq.c index 7b0603e..cdc02ac 100644 --- a/drivers/cpufreq/pcc-cpufreq.c +++ b/drivers/cpufreq/pcc-cpufreq.c @@ -261,6 +261,9 @@ static int pcc_get_offset(int cpu) pr = per_cpu(processors, cpu); pcc_cpu_data = per_cpu_ptr(pcc_cpu_info, cpu); + if (!pr) + return -ENODEV; + status = acpi_evaluate_object(pr->handle, "PCCP", NULL, &buffer); if (ACPI_FAILURE(status)) return -ENODEV; diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig index 2e3b3d3..ab8f469 100644 --- a/drivers/dma/Kconfig +++ b/drivers/dma/Kconfig @@ -193,7 +193,8 @@ config ARCH_HAS_ASYNC_TX_FIND_CHANNEL config PL330_DMA tristate "DMA API Driver for PL330" select DMA_ENGINE - depends on PL330 + depends on ARM_AMBA + select PL330 help Select if your platform has one or more PL330 DMACs. You need to provide platform specific settings via diff --git a/drivers/dma/amba-pl08x.c b/drivers/dma/amba-pl08x.c index be21e3f..cd8df7f 100644 --- a/drivers/dma/amba-pl08x.c +++ b/drivers/dma/amba-pl08x.c @@ -66,32 +66,29 @@ * after the final transfer signalled by LBREQ or LSREQ. The DMAC * will then move to the next LLI entry. * - * Only the former works sanely with scatter lists, so we only implement - * the DMAC flow control method. However, peripherals which use the LBREQ - * and LSREQ signals (eg, MMCI) are unable to use this mode, which through - * these hardware restrictions prevents them from using scatter DMA. - * * Global TODO: * - Break out common code from arch/arm/mach-s3c64xx and share */ -#include <linux/device.h> -#include <linux/init.h> -#include <linux/module.h> -#include <linux/interrupt.h> -#include <linux/slab.h> -#include <linux/delay.h> -#include <linux/dma-mapping.h> -#include <linux/dmapool.h> -#include <linux/dmaengine.h> #include <linux/amba/bus.h> #include <linux/amba/pl08x.h> #include <linux/debugfs.h> +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/dmaengine.h> +#include <linux/dmapool.h> +#include <linux/dma-mapping.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/pm_runtime.h> #include <linux/seq_file.h> - +#include <linux/slab.h> #include <asm/hardware/pl080.h> #define DRIVER_NAME "pl08xdmac" +static struct amba_driver pl08x_amba_driver; + /** * struct vendor_data - vendor-specific config parameters for PL08x derivatives * @channels: the number of channels available in this variant @@ -126,7 +123,8 @@ struct pl08x_lli { * @phy_chans: array of data for the physical channels * @pool: a pool for the LLI descriptors * @pool_ctr: counter of LLIs in the pool - * @lli_buses: bitmask to or in to LLI pointer selecting AHB port for LLI fetches + * @lli_buses: bitmask to or in to LLI pointer selecting AHB port for LLI + * fetches * @mem_buses: set to indicate memory transfers on AHB2. * @lock: a spinlock for this struct */ @@ -149,14 +147,6 @@ struct pl08x_driver_data { * PL08X specific defines */ -/* - * Memory boundaries: the manual for PL08x says that the controller - * cannot read past a 1KiB boundary, so these defines are used to - * create transfer LLIs that do not cross such boundaries. - */ -#define PL08X_BOUNDARY_SHIFT (10) /* 1KB 0x400 */ -#define PL08X_BOUNDARY_SIZE (1 << PL08X_BOUNDARY_SHIFT) - /* Size (bytes) of each LLI buffer allocated for one transfer */ # define PL08X_LLI_TSFR_SIZE 0x2000 @@ -272,7 +262,6 @@ static void pl08x_resume_phy_chan(struct pl08x_phy_chan *ch) writel(val, ch->base + PL080_CH_CONFIG); } - /* * pl08x_terminate_phy_chan() stops the channel, clears the FIFO and * clears any pending interrupt status. This should not be used for @@ -407,6 +396,7 @@ pl08x_get_phy_channel(struct pl08x_driver_data *pl08x, return NULL; } + pm_runtime_get_sync(&pl08x->adev->dev); return ch; } @@ -420,6 +410,8 @@ static inline void pl08x_put_phy_channel(struct pl08x_driver_data *pl08x, /* Stop the channel and clear its interrupts */ pl08x_terminate_phy_chan(pl08x, ch); + pm_runtime_put(&pl08x->adev->dev); + /* Mark it as free */ ch->serving = NULL; spin_unlock_irqrestore(&ch->lock, flags); @@ -499,36 +491,30 @@ struct pl08x_lli_build_data { }; /* - * Autoselect a master bus to use for the transfer this prefers the - * destination bus if both available if fixed address on one bus the - * other will be chosen + * Autoselect a master bus to use for the transfer. Slave will be the chosen as + * victim in case src & dest are not similarly aligned. i.e. If after aligning + * masters address with width requirements of transfer (by sending few byte by + * byte data), slave is still not aligned, then its width will be reduced to + * BYTE. + * - prefers the destination bus if both available + * - prefers bus with fixed address (i.e. peripheral) */ static void pl08x_choose_master_bus(struct pl08x_lli_build_data *bd, struct pl08x_bus_data **mbus, struct pl08x_bus_data **sbus, u32 cctl) { if (!(cctl & PL080_CONTROL_DST_INCR)) { - *mbus = &bd->srcbus; - *sbus = &bd->dstbus; - } else if (!(cctl & PL080_CONTROL_SRC_INCR)) { *mbus = &bd->dstbus; *sbus = &bd->srcbus; + } else if (!(cctl & PL080_CONTROL_SRC_INCR)) { + *mbus = &bd->srcbus; + *sbus = &bd->dstbus; } else { - if (bd->dstbus.buswidth == 4) { - *mbus = &bd->dstbus; - *sbus = &bd->srcbus; - } else if (bd->srcbus.buswidth == 4) { - *mbus = &bd->srcbus; - *sbus = &bd->dstbus; - } else if (bd->dstbus.buswidth == 2) { + if (bd->dstbus.buswidth >= bd->srcbus.buswidth) { *mbus = &bd->dstbus; *sbus = &bd->srcbus; - } else if (bd->srcbus.buswidth == 2) { + } else { *mbus = &bd->srcbus; *sbus = &bd->dstbus; - } else { - /* bd->srcbus.buswidth == 1 */ - *mbus = &bd->dstbus; - *sbus = &bd->srcbus; } } } @@ -547,7 +533,8 @@ static void pl08x_fill_lli_for_desc(struct pl08x_lli_build_data *bd, llis_va[num_llis].cctl = cctl; llis_va[num_llis].src = bd->srcbus.addr; llis_va[num_llis].dst = bd->dstbus.addr; - llis_va[num_llis].lli = llis_bus + (num_llis + 1) * sizeof(struct pl08x_lli); + llis_va[num_llis].lli = llis_bus + (num_llis + 1) * + sizeof(struct pl08x_lli); llis_va[num_llis].lli |= bd->lli_bus; if (cctl & PL080_CONTROL_SRC_INCR) @@ -560,16 +547,12 @@ static void pl08x_fill_lli_for_desc(struct pl08x_lli_build_data *bd, bd->remainder -= len; } -/* - * Return number of bytes to fill to boundary, or len. - * This calculation works for any value of addr. - */ -static inline size_t pl08x_pre_boundary(u32 addr, size_t len) +static inline void prep_byte_width_lli(struct pl08x_lli_build_data *bd, + u32 *cctl, u32 len, int num_llis, size_t *total_bytes) { - size_t boundary_len = PL08X_BOUNDARY_SIZE - - (addr & (PL08X_BOUNDARY_SIZE - 1)); - - return min(boundary_len, len); + *cctl = pl08x_cctl_bits(*cctl, 1, 1, len); + pl08x_fill_lli_for_desc(bd, num_llis, len, *cctl); + (*total_bytes) += len; } /* @@ -583,13 +566,11 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, struct pl08x_bus_data *mbus, *sbus; struct pl08x_lli_build_data bd; int num_llis = 0; - u32 cctl; - size_t max_bytes_per_lli; - size_t total_bytes = 0; + u32 cctl, early_bytes = 0; + size_t max_bytes_per_lli, total_bytes = 0; struct pl08x_lli *llis_va; - txd->llis_va = dma_pool_alloc(pl08x->pool, GFP_NOWAIT, - &txd->llis_bus); + txd->llis_va = dma_pool_alloc(pl08x->pool, GFP_NOWAIT, &txd->llis_bus); if (!txd->llis_va) { dev_err(&pl08x->adev->dev, "%s no memory for llis\n", __func__); return 0; @@ -619,55 +600,85 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, bd.srcbus.buswidth = bd.srcbus.maxwidth; bd.dstbus.buswidth = bd.dstbus.maxwidth; - /* - * Bytes transferred == tsize * MIN(buswidths), not max(buswidths) - */ - max_bytes_per_lli = min(bd.srcbus.buswidth, bd.dstbus.buswidth) * - PL080_CONTROL_TRANSFER_SIZE_MASK; - /* We need to count this down to zero */ bd.remainder = txd->len; - /* - * Choose bus to align to - * - prefers destination bus if both available - * - if fixed address on one bus chooses other - */ pl08x_choose_master_bus(&bd, &mbus, &sbus, cctl); - dev_vdbg(&pl08x->adev->dev, "src=0x%08x%s/%u dst=0x%08x%s/%u len=%zu llimax=%zu\n", + dev_vdbg(&pl08x->adev->dev, "src=0x%08x%s/%u dst=0x%08x%s/%u len=%zu\n", bd.srcbus.addr, cctl & PL080_CONTROL_SRC_INCR ? "+" : "", bd.srcbus.buswidth, bd.dstbus.addr, cctl & PL080_CONTROL_DST_INCR ? "+" : "", bd.dstbus.buswidth, - bd.remainder, max_bytes_per_lli); + bd.remainder); dev_vdbg(&pl08x->adev->dev, "mbus=%s sbus=%s\n", mbus == &bd.srcbus ? "src" : "dst", sbus == &bd.srcbus ? "src" : "dst"); - if (txd->len < mbus->buswidth) { - /* Less than a bus width available - send as single bytes */ - while (bd.remainder) { - dev_vdbg(&pl08x->adev->dev, - "%s single byte LLIs for a transfer of " - "less than a bus width (remain 0x%08x)\n", - __func__, bd.remainder); - cctl = pl08x_cctl_bits(cctl, 1, 1, 1); - pl08x_fill_lli_for_desc(&bd, num_llis++, 1, cctl); - total_bytes++; + /* + * Zero length is only allowed if all these requirements are met: + * - flow controller is peripheral. + * - src.addr is aligned to src.width + * - dst.addr is aligned to dst.width + * + * sg_len == 1 should be true, as there can be two cases here: + * - Memory addresses are contiguous and are not scattered. Here, Only + * one sg will be passed by user driver, with memory address and zero + * length. We pass this to controller and after the transfer it will + * receive the last burst request from peripheral and so transfer + * finishes. + * + * - Memory addresses are scattered and are not contiguous. Here, + * Obviously as DMA controller doesn't know when a lli's transfer gets + * over, it can't load next lli. So in this case, there has to be an + * assumption that only one lli is supported. Thus, we can't have + * scattered addresses. + */ + if (!bd.remainder) { + u32 fc = (txd->ccfg & PL080_CONFIG_FLOW_CONTROL_MASK) >> + PL080_CONFIG_FLOW_CONTROL_SHIFT; + if (!((fc >= PL080_FLOW_SRC2DST_DST) && + (fc <= PL080_FLOW_SRC2DST_SRC))) { + dev_err(&pl08x->adev->dev, "%s sg len can't be zero", + __func__); + return 0; } - } else { - /* Make one byte LLIs until master bus is aligned */ - while ((mbus->addr) % (mbus->buswidth)) { - dev_vdbg(&pl08x->adev->dev, - "%s adjustment lli for less than bus width " - "(remain 0x%08x)\n", - __func__, bd.remainder); - cctl = pl08x_cctl_bits(cctl, 1, 1, 1); - pl08x_fill_lli_for_desc(&bd, num_llis++, 1, cctl); - total_bytes++; + + if ((bd.srcbus.addr % bd.srcbus.buswidth) || + (bd.srcbus.addr % bd.srcbus.buswidth)) { + dev_err(&pl08x->adev->dev, + "%s src & dst address must be aligned to src" + " & dst width if peripheral is flow controller", + __func__); + return 0; } + cctl = pl08x_cctl_bits(cctl, bd.srcbus.buswidth, + bd.dstbus.buswidth, 0); + pl08x_fill_lli_for_desc(&bd, num_llis++, 0, cctl); + } + + /* + * Send byte by byte for following cases + * - Less than a bus width available + * - until master bus is aligned + */ + if (bd.remainder < mbus->buswidth) + early_bytes = bd.remainder; + else if ((mbus->addr) % (mbus->buswidth)) { + early_bytes = mbus->buswidth - (mbus->addr) % (mbus->buswidth); + if ((bd.remainder - early_bytes) < mbus->buswidth) + early_bytes = bd.remainder; + } + + if (early_bytes) { + dev_vdbg(&pl08x->adev->dev, "%s byte width LLIs " + "(remain 0x%08x)\n", __func__, bd.remainder); + prep_byte_width_lli(&bd, &cctl, early_bytes, num_llis++, + &total_bytes); + } + + if (bd.remainder) { /* * Master now aligned * - if slave is not then we must set its width down @@ -680,138 +691,55 @@ static int pl08x_fill_llis_for_desc(struct pl08x_driver_data *pl08x, sbus->buswidth = 1; } + /* Bytes transferred = tsize * src width, not MIN(buswidths) */ + max_bytes_per_lli = bd.srcbus.buswidth * + PL080_CONTROL_TRANSFER_SIZE_MASK; + /* * Make largest possible LLIs until less than one bus * width left */ while (bd.remainder > (mbus->buswidth - 1)) { - size_t lli_len, target_len, tsize, odd_bytes; + size_t lli_len, tsize, width; /* * If enough left try to send max possible, * otherwise try to send the remainder */ - target_len = min(bd.remainder, max_bytes_per_lli); + lli_len = min(bd.remainder, max_bytes_per_lli); /* - * Set bus lengths for incrementing buses to the - * number of bytes which fill to next memory boundary, - * limiting on the target length calculated above. + * Check against maximum bus alignment: Calculate actual + * transfer size in relation to bus width and get a + * maximum remainder of the highest bus width - 1 */ - if (cctl & PL080_CONTROL_SRC_INCR) - bd.srcbus.fill_bytes = - pl08x_pre_boundary(bd.srcbus.addr, - target_len); - else - bd.srcbus.fill_bytes = target_len; - - if (cctl & PL080_CONTROL_DST_INCR) - bd.dstbus.fill_bytes = - pl08x_pre_boundary(bd.dstbus.addr, - target_len); - else - bd.dstbus.fill_bytes = target_len; - - /* Find the nearest */ - lli_len = min(bd.srcbus.fill_bytes, - bd.dstbus.fill_bytes); - - BUG_ON(lli_len > bd.remainder); - - if (lli_len <= 0) { - dev_err(&pl08x->adev->dev, - "%s lli_len is %zu, <= 0\n", - __func__, lli_len); - return 0; - } - - if (lli_len == target_len) { - /* - * Can send what we wanted. - * Maintain alignment - */ - lli_len = (lli_len/mbus->buswidth) * - mbus->buswidth; - odd_bytes = 0; - } else { - /* - * So now we know how many bytes to transfer - * to get to the nearest boundary. The next - * LLI will past the boundary. However, we - * may be working to a boundary on the slave - * bus. We need to ensure the master stays - * aligned, and that we are working in - * multiples of the bus widths. - */ - odd_bytes = lli_len % mbus->buswidth; - lli_len -= odd_bytes; - - } - - if (lli_len) { - /* - * Check against minimum bus alignment: - * Calculate actual transfer size in relation - * to bus width an get a maximum remainder of - * the smallest bus width - 1 - */ - /* FIXME: use round_down()? */ - tsize = lli_len / min(mbus->buswidth, - sbus->buswidth); - lli_len = tsize * min(mbus->buswidth, - sbus->buswidth); - - if (target_len != lli_len) { - dev_vdbg(&pl08x->adev->dev, - "%s can't send what we want. Desired 0x%08zx, lli of 0x%08zx bytes in txd of 0x%08zx\n", - __func__, target_len, lli_len, txd->len); - } - - cctl = pl08x_cctl_bits(cctl, - bd.srcbus.buswidth, - bd.dstbus.buswidth, - tsize); - - dev_vdbg(&pl08x->adev->dev, - "%s fill lli with single lli chunk of size 0x%08zx (remainder 0x%08zx)\n", - __func__, lli_len, bd.remainder); - pl08x_fill_lli_for_desc(&bd, num_llis++, - lli_len, cctl); - total_bytes += lli_len; - } + width = max(mbus->buswidth, sbus->buswidth); + lli_len = (lli_len / width) * width; + tsize = lli_len / bd.srcbus.buswidth; - - if (odd_bytes) { - /* - * Creep past the boundary, maintaining - * master alignment - */ - int j; - for (j = 0; (j < mbus->buswidth) - && (bd.remainder); j++) { - cctl = pl08x_cctl_bits(cctl, 1, 1, 1); - dev_vdbg(&pl08x->adev->dev, - "%s align with boundary, single byte (remain 0x%08zx)\n", - __func__, bd.remainder); - pl08x_fill_lli_for_desc(&bd, - num_llis++, 1, cctl); - total_bytes++; - } - } + dev_vdbg(&pl08x->adev->dev, + "%s fill lli with single lli chunk of " + "size 0x%08zx (remainder 0x%08zx)\n", + __func__, lli_len, bd.remainder); + + cctl = pl08x_cctl_bits(cctl, bd.srcbus.buswidth, + bd.dstbus.buswidth, tsize); + pl08x_fill_lli_for_desc(&bd, num_llis++, lli_len, cctl); + total_bytes += lli_len; } /* * Send any odd bytes */ - while (bd.remainder) { - cctl = pl08x_cctl_bits(cctl, 1, 1, 1); + if (bd.remainder) { dev_vdbg(&pl08x->adev->dev, - "%s align with boundary, single odd byte (remain %zu)\n", + "%s align with boundary, send odd bytes (remain %zu)\n", __func__, bd.remainder); - pl08x_fill_lli_for_desc(&bd, num_llis++, 1, cctl); - total_bytes++; + prep_byte_width_lli(&bd, &cctl, bd.remainder, + num_llis++, &total_bytes); } } + if (total_bytes != txd->len) { dev_err(&pl08x->adev->dev, "%s size of encoded lli:s don't match total txd, transferred 0x%08zx from size 0x%08zx\n", @@ -917,9 +845,7 @@ static int prep_phy_channel(struct pl08x_dma_chan *plchan, * need, but for slaves the physical signals may be muxed! * Can the platform allow us to use this channel? */ - if (plchan->slave && - ch->signal < 0 && - pl08x->pd->get_signal) { + if (plchan->slave && pl08x->pd->get_signal) { ret = pl08x->pd->get_signal(plchan); if (ret < 0) { dev_dbg(&pl08x->adev->dev, @@ -1008,10 +934,8 @@ static struct dma_async_tx_descriptor *pl08x_prep_dma_interrupt( * If slaves are relying on interrupts to signal completion this function * must not be called with interrupts disabled. */ -static enum dma_status -pl08x_dma_tx_status(struct dma_chan *chan, - dma_cookie_t cookie, - struct dma_tx_state *txstate) +static enum dma_status pl08x_dma_tx_status(struct dma_chan *chan, + dma_cookie_t cookie, struct dma_tx_state *txstate) { struct pl08x_dma_chan *plchan = to_pl08x_chan(chan); dma_cookie_t last_used; @@ -1253,7 +1177,9 @@ static int pl08x_prep_channel_resources(struct pl08x_dma_chan *plchan, num_llis = pl08x_fill_llis_for_desc(pl08x, txd); if (!num_llis) { - kfree(txd); + spin_lock_irqsave(&plchan->lock, flags); + pl08x_free_txd(pl08x, txd); + spin_unlock_irqrestore(&plchan->lock, flags); return -EINVAL; } @@ -1301,7 +1227,7 @@ static int pl08x_prep_channel_resources(struct pl08x_dma_chan *plchan, static struct pl08x_txd *pl08x_get_txd(struct pl08x_dma_chan *plchan, unsigned long flags) { - struct pl08x_txd *txd = kzalloc(sizeof(struct pl08x_txd), GFP_NOWAIT); + struct pl08x_txd *txd = kzalloc(sizeof(*txd), GFP_NOWAIT); if (txd) { dma_async_tx_descriptor_init(&txd->tx, &plchan->chan); @@ -1367,7 +1293,7 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg( struct pl08x_dma_chan *plchan = to_pl08x_chan(chan); struct pl08x_driver_data *pl08x = plchan->host; struct pl08x_txd *txd; - int ret; + int ret, tmp; /* * Current implementation ASSUMES only one sg @@ -1401,12 +1327,10 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg( txd->len = sgl->length; if (direction == DMA_TO_DEVICE) { - txd->ccfg |= PL080_FLOW_MEM2PER << PL080_CONFIG_FLOW_CONTROL_SHIFT; txd->cctl = plchan->dst_cctl; txd->src_addr = sgl->dma_address; txd->dst_addr = plchan->dst_addr; } else if (direction == DMA_FROM_DEVICE) { - txd->ccfg |= PL080_FLOW_PER2MEM << PL080_CONFIG_FLOW_CONTROL_SHIFT; txd->cctl = plchan->src_cctl; txd->src_addr = plchan->src_addr; txd->dst_addr = sgl->dma_address; @@ -1416,6 +1340,15 @@ static struct dma_async_tx_descriptor *pl08x_prep_slave_sg( return NULL; } + if (plchan->cd->device_fc) + tmp = (direction == DMA_TO_DEVICE) ? PL080_FLOW_MEM2PER_PER : + PL080_FLOW_PER2MEM_PER; + else + tmp = (direction == DMA_TO_DEVICE) ? PL080_FLOW_MEM2PER : + PL080_FLOW_PER2MEM; + + txd->ccfg |= tmp << PL080_CONFIG_FLOW_CONTROL_SHIFT; + ret = pl08x_prep_channel_resources(plchan, txd); if (ret) return NULL; @@ -1489,9 +1422,15 @@ static int pl08x_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, bool pl08x_filter_id(struct dma_chan *chan, void *chan_id) { - struct pl08x_dma_chan *plchan = to_pl08x_chan(chan); + struct pl08x_dma_chan *plchan; char *name = chan_id; + /* Reject channels for devices not bound to this driver */ + if (chan->device->dev->driver != &pl08x_amba_driver.drv) + return false; + + plchan = to_pl08x_chan(chan); + /* Check that the channel is not taken! */ if (!strcmp(plchan->name, name)) return true; @@ -1507,13 +1446,7 @@ bool pl08x_filter_id(struct dma_chan *chan, void *chan_id) */ static void pl08x_ensure_on(struct pl08x_driver_data *pl08x) { - u32 val; - - val = readl(pl08x->base + PL080_CONFIG); - val &= ~(PL080_CONFIG_M2_BE | PL080_CONFIG_M1_BE | PL080_CONFIG_ENABLE); - /* We implicitly clear bit 1 and that means little-endian mode */ - val |= PL080_CONFIG_ENABLE; - writel(val, pl08x->base + PL080_CONFIG); + writel(PL080_CONFIG_ENABLE, pl08x->base + PL080_CONFIG); } static void pl08x_unmap_buffers(struct pl08x_txd *txd) @@ -1589,8 +1522,8 @@ static void pl08x_tasklet(unsigned long data) */ list_for_each_entry(waiting, &pl08x->memcpy.channels, chan.device_node) { - if (waiting->state == PL08X_CHAN_WAITING && - waiting->waiting != NULL) { + if (waiting->state == PL08X_CHAN_WAITING && + waiting->waiting != NULL) { int ret; /* This should REALLY not fail now */ @@ -1630,38 +1563,40 @@ static void pl08x_tasklet(unsigned long data) static irqreturn_t pl08x_irq(int irq, void *dev) { struct pl08x_driver_data *pl08x = dev; - u32 mask = 0; - u32 val; - int i; - - val = readl(pl08x->base + PL080_ERR_STATUS); - if (val) { - /* An error interrupt (on one or more channels) */ - dev_err(&pl08x->adev->dev, - "%s error interrupt, register value 0x%08x\n", - __func__, val); - /* - * Simply clear ALL PL08X error interrupts, - * regardless of channel and cause - * FIXME: should be 0x00000003 on PL081 really. - */ - writel(0x000000FF, pl08x->base + PL080_ERR_CLEAR); + u32 mask = 0, err, tc, i; + + /* check & clear - ERR & TC interrupts */ + err = readl(pl08x->base + PL080_ERR_STATUS); + if (err) { + dev_err(&pl08x->adev->dev, "%s error interrupt, register value 0x%08x\n", + __func__, err); + writel(err, pl08x->base + PL080_ERR_CLEAR); } - val = readl(pl08x->base + PL080_INT_STATUS); + tc = readl(pl08x->base + PL080_INT_STATUS); + if (tc) + writel(tc, pl08x->base + PL080_TC_CLEAR); + + if (!err && !tc) + return IRQ_NONE; + for (i = 0; i < pl08x->vd->channels; i++) { - if ((1 << i) & val) { + if (((1 << i) & err) || ((1 << i) & tc)) { /* Locate physical channel */ struct pl08x_phy_chan *phychan = &pl08x->phy_chans[i]; struct pl08x_dma_chan *plchan = phychan->serving; + if (!plchan) { + dev_err(&pl08x->adev->dev, + "%s Error TC interrupt on unused channel: 0x%08x\n", + __func__, i); + continue; + } + /* Schedule tasklet on this channel */ tasklet_schedule(&plchan->tasklet); - mask |= (1 << i); } } - /* Clear only the terminal interrupts on channels we processed */ - writel(mask, pl08x->base + PL080_TC_CLEAR); return mask ? IRQ_HANDLED : IRQ_NONE; } @@ -1685,9 +1620,7 @@ static void pl08x_dma_slave_init(struct pl08x_dma_chan *chan) * Make a local wrapper to hold required data */ static int pl08x_dma_init_virtual_channels(struct pl08x_driver_data *pl08x, - struct dma_device *dmadev, - unsigned int channels, - bool slave) + struct dma_device *dmadev, unsigned int channels, bool slave) { struct pl08x_dma_chan *chan; int i; @@ -1700,7 +1633,7 @@ static int pl08x_dma_init_virtual_channels(struct pl08x_driver_data *pl08x, * to cope with that situation. */ for (i = 0; i < channels; i++) { - chan = kzalloc(sizeof(struct pl08x_dma_chan), GFP_KERNEL); + chan = kzalloc(sizeof(*chan), GFP_KERNEL); if (!chan) { dev_err(&pl08x->adev->dev, "%s no memory for channel\n", __func__); @@ -1728,7 +1661,7 @@ static int pl08x_dma_init_virtual_channels(struct pl08x_driver_data *pl08x, kfree(chan); continue; } - dev_info(&pl08x->adev->dev, + dev_dbg(&pl08x->adev->dev, "initialize virtual channel \"%s\"\n", chan->name); @@ -1837,9 +1770,9 @@ static const struct file_operations pl08x_debugfs_operations = { static void init_pl08x_debugfs(struct pl08x_driver_data *pl08x) { /* Expose a simple debugfs interface to view all clocks */ - (void) debugfs_create_file(dev_name(&pl08x->adev->dev), S_IFREG | S_IRUGO, - NULL, pl08x, - &pl08x_debugfs_operations); + (void) debugfs_create_file(dev_name(&pl08x->adev->dev), + S_IFREG | S_IRUGO, NULL, pl08x, + &pl08x_debugfs_operations); } #else @@ -1860,12 +1793,15 @@ static int pl08x_probe(struct amba_device *adev, const struct amba_id *id) return ret; /* Create the driver state holder */ - pl08x = kzalloc(sizeof(struct pl08x_driver_data), GFP_KERNEL); + pl08x = kzalloc(sizeof(*pl08x), GFP_KERNEL); if (!pl08x) { ret = -ENOMEM; goto out_no_pl08x; } + pm_runtime_set_active(&adev->dev); + pm_runtime_enable(&adev->dev); + /* Initialize memcpy engine */ dma_cap_set(DMA_MEMCPY, pl08x->memcpy.cap_mask); pl08x->memcpy.dev = &adev->dev; @@ -1939,7 +1875,7 @@ static int pl08x_probe(struct amba_device *adev, const struct amba_id *id) } /* Initialize physical channels */ - pl08x->phy_chans = kmalloc((vd->channels * sizeof(struct pl08x_phy_chan)), + pl08x->phy_chans = kmalloc((vd->channels * sizeof(*pl08x->phy_chans)), GFP_KERNEL); if (!pl08x->phy_chans) { dev_err(&adev->dev, "%s failed to allocate " @@ -1956,9 +1892,8 @@ static int pl08x_probe(struct amba_device *adev, const struct amba_id *id) spin_lock_init(&ch->lock); ch->serving = NULL; ch->signal = -1; - dev_info(&adev->dev, - "physical channel %d is %s\n", i, - pl08x_phy_channel_busy(ch) ? "BUSY" : "FREE"); + dev_dbg(&adev->dev, "physical channel %d is %s\n", + i, pl08x_phy_channel_busy(ch) ? "BUSY" : "FREE"); } /* Register as many memcpy channels as there are physical channels */ @@ -1974,8 +1909,7 @@ static int pl08x_probe(struct amba_device *adev, const struct amba_id *id) /* Register slave channels */ ret = pl08x_dma_init_virtual_channels(pl08x, &pl08x->slave, - pl08x->pd->num_slave_channels, - true); + pl08x->pd->num_slave_channels, true); if (ret <= 0) { dev_warn(&pl08x->adev->dev, "%s failed to enumerate slave channels - %d\n", @@ -2005,6 +1939,8 @@ static int pl08x_probe(struct amba_device *adev, const struct amba_id *id) dev_info(&pl08x->adev->dev, "DMA: PL%03x rev%u at 0x%08llx irq %d\n", amba_part(adev), amba_rev(adev), (unsigned long long)adev->res.start, adev->irq[0]); + + pm_runtime_put(&adev->dev); return 0; out_no_slave_reg: @@ -2023,6 +1959,9 @@ out_no_ioremap: dma_pool_destroy(pl08x->pool); out_no_lli_pool: out_no_platdata: + pm_runtime_put(&adev->dev); + pm_runtime_disable(&adev->dev); + kfree(pl08x); out_no_pl08x: amba_release_regions(adev); diff --git a/drivers/dma/at_hdmac.c b/drivers/dma/at_hdmac.c index 6a483ea..3b99dc6 100644 --- a/drivers/dma/at_hdmac.c +++ b/drivers/dma/at_hdmac.c @@ -107,10 +107,11 @@ static struct at_desc *atc_desc_get(struct at_dma_chan *atchan) { struct at_desc *desc, *_desc; struct at_desc *ret = NULL; + unsigned long flags; unsigned int i = 0; LIST_HEAD(tmp_list); - spin_lock_bh(&atchan->lock); + spin_lock_irqsave(&atchan->lock, flags); list_for_each_entry_safe(desc, _desc, &atchan->free_list, desc_node) { i++; if (async_tx_test_ack(&desc->txd)) { @@ -121,7 +122,7 @@ static struct at_desc *atc_desc_get(struct at_dma_chan *atchan) dev_dbg(chan2dev(&atchan->chan_common), "desc %p not ACKed\n", desc); } - spin_unlock_bh(&atchan->lock); + spin_unlock_irqrestore(&atchan->lock, flags); dev_vdbg(chan2dev(&atchan->chan_common), "scanned %u descriptors on freelist\n", i); @@ -129,9 +130,9 @@ static struct at_desc *atc_desc_get(struct at_dma_chan *atchan) if (!ret) { ret = atc_alloc_descriptor(&atchan->chan_common, GFP_ATOMIC); if (ret) { - spin_lock_bh(&atchan->lock); + spin_lock_irqsave(&atchan->lock, flags); atchan->descs_allocated++; - spin_unlock_bh(&atchan->lock); + spin_unlock_irqrestore(&atchan->lock, flags); } else { dev_err(chan2dev(&atchan->chan_common), "not enough descriptors available\n"); @@ -150,8 +151,9 @@ static void atc_desc_put(struct at_dma_chan *atchan, struct at_desc *desc) { if (desc) { struct at_desc *child; + unsigned long flags; - spin_lock_bh(&atchan->lock); + spin_lock_irqsave(&atchan->lock, flags); list_for_each_entry(child, &desc->tx_list, desc_node) dev_vdbg(chan2dev(&atchan->chan_common), "moving child desc %p to freelist\n", @@ -160,7 +162,7 @@ static void atc_desc_put(struct at_dma_chan *atchan, struct at_desc *desc) dev_vdbg(chan2dev(&atchan->chan_common), "moving desc %p to freelist\n", desc); list_add(&desc->desc_node, &atchan->free_list); - spin_unlock_bh(&atchan->lock); + spin_unlock_irqrestore(&atchan->lock, flags); } } @@ -299,7 +301,7 @@ atc_chain_complete(struct at_dma_chan *atchan, struct at_desc *desc) /* for cyclic transfers, * no need to replay callback function while stopping */ - if (!test_bit(ATC_IS_CYCLIC, &atchan->status)) { + if (!atc_chan_is_cyclic(atchan)) { dma_async_tx_callback callback = txd->callback; void *param = txd->callback_param; @@ -471,16 +473,17 @@ static void atc_handle_cyclic(struct at_dma_chan *atchan) static void atc_tasklet(unsigned long data) { struct at_dma_chan *atchan = (struct at_dma_chan *)data; + unsigned long flags; - spin_lock(&atchan->lock); + spin_lock_irqsave(&atchan->lock, flags); if (test_and_clear_bit(ATC_IS_ERROR, &atchan->status)) atc_handle_error(atchan); - else if (test_bit(ATC_IS_CYCLIC, &atchan->status)) + else if (atc_chan_is_cyclic(atchan)) atc_handle_cyclic(atchan); else atc_advance_work(atchan); - spin_unlock(&atchan->lock); + spin_unlock_irqrestore(&atchan->lock, flags); } static irqreturn_t at_dma_interrupt(int irq, void *dev_id) @@ -539,8 +542,9 @@ static dma_cookie_t atc_tx_submit(struct dma_async_tx_descriptor *tx) struct at_desc *desc = txd_to_at_desc(tx); struct at_dma_chan *atchan = to_at_dma_chan(tx->chan); dma_cookie_t cookie; + unsigned long flags; - spin_lock_bh(&atchan->lock); + spin_lock_irqsave(&atchan->lock, flags); cookie = atc_assign_cookie(atchan, desc); if (list_empty(&atchan->active_list)) { @@ -554,7 +558,7 @@ static dma_cookie_t atc_tx_submit(struct dma_async_tx_descriptor *tx) list_add_tail(&desc->desc_node, &atchan->queue); } - spin_unlock_bh(&atchan->lock); + spin_unlock_irqrestore(&atchan->lock, flags); return cookie; } @@ -927,28 +931,29 @@ static int atc_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, struct at_dma_chan *atchan = to_at_dma_chan(chan); struct at_dma *atdma = to_at_dma(chan->device); int chan_id = atchan->chan_common.chan_id; + unsigned long flags; LIST_HEAD(list); dev_vdbg(chan2dev(chan), "atc_control (%d)\n", cmd); if (cmd == DMA_PAUSE) { - spin_lock_bh(&atchan->lock); + spin_lock_irqsave(&atchan->lock, flags); dma_writel(atdma, CHER, AT_DMA_SUSP(chan_id)); set_bit(ATC_IS_PAUSED, &atchan->status); - spin_unlock_bh(&atchan->lock); + spin_unlock_irqrestore(&atchan->lock, flags); } else if (cmd == DMA_RESUME) { - if (!test_bit(ATC_IS_PAUSED, &atchan->status)) + if (!atc_chan_is_paused(atchan)) return 0; - spin_lock_bh(&atchan->lock); + spin_lock_irqsave(&atchan->lock, flags); dma_writel(atdma, CHDR, AT_DMA_RES(chan_id)); clear_bit(ATC_IS_PAUSED, &atchan->status); - spin_unlock_bh(&atchan->lock); + spin_unlock_irqrestore(&atchan->lock, flags); } else if (cmd == DMA_TERMINATE_ALL) { struct at_desc *desc, *_desc; /* @@ -957,7 +962,7 @@ static int atc_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, * channel. We still have to poll the channel enable bit due * to AHB/HSB limitations. */ - spin_lock_bh(&atchan->lock); + spin_lock_irqsave(&atchan->lock, flags); /* disabling channel: must also remove suspend state */ dma_writel(atdma, CHDR, AT_DMA_RES(chan_id) | atchan->mask); @@ -978,7 +983,7 @@ static int atc_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, /* if channel dedicated to cyclic operations, free it */ clear_bit(ATC_IS_CYCLIC, &atchan->status); - spin_unlock_bh(&atchan->lock); + spin_unlock_irqrestore(&atchan->lock, flags); } else { return -ENXIO; } @@ -1004,9 +1009,10 @@ atc_tx_status(struct dma_chan *chan, struct at_dma_chan *atchan = to_at_dma_chan(chan); dma_cookie_t last_used; dma_cookie_t last_complete; + unsigned long flags; enum dma_status ret; - spin_lock_bh(&atchan->lock); + spin_lock_irqsave(&atchan->lock, flags); last_complete = atchan->completed_cookie; last_used = chan->cookie; @@ -1021,7 +1027,7 @@ atc_tx_status(struct dma_chan *chan, ret = dma_async_is_complete(cookie, last_complete, last_used); } - spin_unlock_bh(&atchan->lock); + spin_unlock_irqrestore(&atchan->lock, flags); if (ret != DMA_SUCCESS) dma_set_tx_state(txstate, last_complete, last_used, @@ -1029,7 +1035,7 @@ atc_tx_status(struct dma_chan *chan, else dma_set_tx_state(txstate, last_complete, last_used, 0); - if (test_bit(ATC_IS_PAUSED, &atchan->status)) + if (atc_chan_is_paused(atchan)) ret = DMA_PAUSED; dev_vdbg(chan2dev(chan), "tx_status %d: cookie = %d (d%d, u%d)\n", @@ -1046,18 +1052,19 @@ atc_tx_status(struct dma_chan *chan, static void atc_issue_pending(struct dma_chan *chan) { struct at_dma_chan *atchan = to_at_dma_chan(chan); + unsigned long flags; dev_vdbg(chan2dev(chan), "issue_pending\n"); /* Not needed for cyclic transfers */ - if (test_bit(ATC_IS_CYCLIC, &atchan->status)) + if (atc_chan_is_cyclic(atchan)) return; - spin_lock_bh(&atchan->lock); + spin_lock_irqsave(&atchan->lock, flags); if (!atc_chan_is_enabled(atchan)) { atc_advance_work(atchan); } - spin_unlock_bh(&atchan->lock); + spin_unlock_irqrestore(&atchan->lock, flags); } /** @@ -1073,6 +1080,7 @@ static int atc_alloc_chan_resources(struct dma_chan *chan) struct at_dma *atdma = to_at_dma(chan->device); struct at_desc *desc; struct at_dma_slave *atslave; + unsigned long flags; int i; u32 cfg; LIST_HEAD(tmp_list); @@ -1116,11 +1124,11 @@ static int atc_alloc_chan_resources(struct dma_chan *chan) list_add_tail(&desc->desc_node, &tmp_list); } - spin_lock_bh(&atchan->lock); + spin_lock_irqsave(&atchan->lock, flags); atchan->descs_allocated = i; list_splice(&tmp_list, &atchan->free_list); atchan->completed_cookie = chan->cookie = 1; - spin_unlock_bh(&atchan->lock); + spin_unlock_irqrestore(&atchan->lock, flags); /* channel parameters */ channel_writel(atchan, CFG, cfg); @@ -1293,15 +1301,13 @@ static int __init at_dma_probe(struct platform_device *pdev) if (dma_has_cap(DMA_MEMCPY, atdma->dma_common.cap_mask)) atdma->dma_common.device_prep_dma_memcpy = atc_prep_dma_memcpy; - if (dma_has_cap(DMA_SLAVE, atdma->dma_common.cap_mask)) + if (dma_has_cap(DMA_SLAVE, atdma->dma_common.cap_mask)) { atdma->dma_common.device_prep_slave_sg = atc_prep_slave_sg; - - if (dma_has_cap(DMA_CYCLIC, atdma->dma_common.cap_mask)) + /* controller can do slave DMA: can trigger cyclic transfers */ + dma_cap_set(DMA_CYCLIC, atdma->dma_common.cap_mask); atdma->dma_common.device_prep_dma_cyclic = atc_prep_dma_cyclic; - - if (dma_has_cap(DMA_SLAVE, atdma->dma_common.cap_mask) || - dma_has_cap(DMA_CYCLIC, atdma->dma_common.cap_mask)) atdma->dma_common.device_control = atc_control; + } dma_writel(atdma, EN, AT_DMA_ENABLE); @@ -1377,27 +1383,112 @@ static void at_dma_shutdown(struct platform_device *pdev) clk_disable(atdma->clk); } +static int at_dma_prepare(struct device *dev) +{ + struct platform_device *pdev = to_platform_device(dev); + struct at_dma *atdma = platform_get_drvdata(pdev); + struct dma_chan *chan, *_chan; + + list_for_each_entry_safe(chan, _chan, &atdma->dma_common.channels, + device_node) { + struct at_dma_chan *atchan = to_at_dma_chan(chan); + /* wait for transaction completion (except in cyclic case) */ + if (atc_chan_is_enabled(atchan) && !atc_chan_is_cyclic(atchan)) + return -EAGAIN; + } + return 0; +} + +static void atc_suspend_cyclic(struct at_dma_chan *atchan) +{ + struct dma_chan *chan = &atchan->chan_common; + + /* Channel should be paused by user + * do it anyway even if it is not done already */ + if (!atc_chan_is_paused(atchan)) { + dev_warn(chan2dev(chan), + "cyclic channel not paused, should be done by channel user\n"); + atc_control(chan, DMA_PAUSE, 0); + } + + /* now preserve additional data for cyclic operations */ + /* next descriptor address in the cyclic list */ + atchan->save_dscr = channel_readl(atchan, DSCR); + + vdbg_dump_regs(atchan); +} + static int at_dma_suspend_noirq(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); struct at_dma *atdma = platform_get_drvdata(pdev); + struct dma_chan *chan, *_chan; - at_dma_off(platform_get_drvdata(pdev)); + /* preserve data */ + list_for_each_entry_safe(chan, _chan, &atdma->dma_common.channels, + device_node) { + struct at_dma_chan *atchan = to_at_dma_chan(chan); + + if (atc_chan_is_cyclic(atchan)) + atc_suspend_cyclic(atchan); + atchan->save_cfg = channel_readl(atchan, CFG); + } + atdma->save_imr = dma_readl(atdma, EBCIMR); + + /* disable DMA controller */ + at_dma_off(atdma); clk_disable(atdma->clk); return 0; } +static void atc_resume_cyclic(struct at_dma_chan *atchan) +{ + struct at_dma *atdma = to_at_dma(atchan->chan_common.device); + + /* restore channel status for cyclic descriptors list: + * next descriptor in the cyclic list at the time of suspend */ + channel_writel(atchan, SADDR, 0); + channel_writel(atchan, DADDR, 0); + channel_writel(atchan, CTRLA, 0); + channel_writel(atchan, CTRLB, 0); + channel_writel(atchan, DSCR, atchan->save_dscr); + dma_writel(atdma, CHER, atchan->mask); + + /* channel pause status should be removed by channel user + * We cannot take the initiative to do it here */ + + vdbg_dump_regs(atchan); +} + static int at_dma_resume_noirq(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); struct at_dma *atdma = platform_get_drvdata(pdev); + struct dma_chan *chan, *_chan; + /* bring back DMA controller */ clk_enable(atdma->clk); dma_writel(atdma, EN, AT_DMA_ENABLE); + + /* clear any pending interrupt */ + while (dma_readl(atdma, EBCISR)) + cpu_relax(); + + /* restore saved data */ + dma_writel(atdma, EBCIER, atdma->save_imr); + list_for_each_entry_safe(chan, _chan, &atdma->dma_common.channels, + device_node) { + struct at_dma_chan *atchan = to_at_dma_chan(chan); + + channel_writel(atchan, CFG, atchan->save_cfg); + if (atc_chan_is_cyclic(atchan)) + atc_resume_cyclic(atchan); + } return 0; } static const struct dev_pm_ops at_dma_dev_pm_ops = { + .prepare = at_dma_prepare, .suspend_noirq = at_dma_suspend_noirq, .resume_noirq = at_dma_resume_noirq, }; diff --git a/drivers/dma/at_hdmac_regs.h b/drivers/dma/at_hdmac_regs.h index 087dbf1..aa4c9ae 100644 --- a/drivers/dma/at_hdmac_regs.h +++ b/drivers/dma/at_hdmac_regs.h @@ -204,6 +204,9 @@ enum atc_status { * @status: transmit status information from irq/prep* functions * to tasklet (use atomic operations) * @tasklet: bottom half to finish transaction work + * @save_cfg: configuration register that is saved on suspend/resume cycle + * @save_dscr: for cyclic operations, preserve next descriptor address in + * the cyclic list on suspend/resume cycle * @lock: serializes enqueue/dequeue operations to descriptors lists * @completed_cookie: identifier for the most recently completed operation * @active_list: list of descriptors dmaengine is being running on @@ -218,6 +221,8 @@ struct at_dma_chan { u8 mask; unsigned long status; struct tasklet_struct tasklet; + u32 save_cfg; + u32 save_dscr; spinlock_t lock; @@ -248,6 +253,7 @@ static inline struct at_dma_chan *to_at_dma_chan(struct dma_chan *dchan) * @chan_common: common dmaengine dma_device object members * @ch_regs: memory mapped register base * @clk: dma controller clock + * @save_imr: interrupt mask register that is saved on suspend/resume cycle * @all_chan_mask: all channels availlable in a mask * @dma_desc_pool: base of DMA descriptor region (DMA address) * @chan: channels table to store at_dma_chan structures @@ -256,6 +262,7 @@ struct at_dma { struct dma_device dma_common; void __iomem *regs; struct clk *clk; + u32 save_imr; u8 all_chan_mask; @@ -355,6 +362,23 @@ static inline int atc_chan_is_enabled(struct at_dma_chan *atchan) return !!(dma_readl(atdma, CHSR) & atchan->mask); } +/** + * atc_chan_is_paused - test channel pause/resume status + * @atchan: channel we want to test status + */ +static inline int atc_chan_is_paused(struct at_dma_chan *atchan) +{ + return test_bit(ATC_IS_PAUSED, &atchan->status); +} + +/** + * atc_chan_is_cyclic - test if given channel has cyclic property set + * @atchan: channel we want to test status + */ +static inline int atc_chan_is_cyclic(struct at_dma_chan *atchan) +{ + return test_bit(ATC_IS_CYCLIC, &atchan->status); +} /** * set_desc_eol - set end-of-link to descriptor so it will end transfer diff --git a/drivers/dma/dmatest.c b/drivers/dma/dmatest.c index 765f5ff..eb1d864 100644 --- a/drivers/dma/dmatest.c +++ b/drivers/dma/dmatest.c @@ -10,6 +10,7 @@ #include <linux/delay.h> #include <linux/dma-mapping.h> #include <linux/dmaengine.h> +#include <linux/freezer.h> #include <linux/init.h> #include <linux/kthread.h> #include <linux/module.h> @@ -251,6 +252,7 @@ static int dmatest_func(void *data) int i; thread_name = current->comm; + set_freezable_with_signal(); ret = -ENOMEM; @@ -305,7 +307,8 @@ static int dmatest_func(void *data) dma_addr_t dma_srcs[src_cnt]; dma_addr_t dma_dsts[dst_cnt]; struct completion cmp; - unsigned long tmo = msecs_to_jiffies(timeout); + unsigned long start, tmo, end = 0 /* compiler... */; + bool reload = true; u8 align = 0; total_tests++; @@ -404,7 +407,17 @@ static int dmatest_func(void *data) } dma_async_issue_pending(chan); - tmo = wait_for_completion_timeout(&cmp, tmo); + do { + start = jiffies; + if (reload) + end = start + msecs_to_jiffies(timeout); + else if (end <= start) + end = start + 1; + tmo = wait_for_completion_interruptible_timeout(&cmp, + end - start); + reload = try_to_freeze(); + } while (tmo == -ERESTARTSYS); + status = dma_async_is_tx_complete(chan, cookie, NULL, NULL); if (tmo == 0) { @@ -477,6 +490,8 @@ err_srcs: pr_notice("%s: terminating after %u tests, %u failures (status %d)\n", thread_name, total_tests, failed_tests, ret); + /* terminate all transfers on specified channels */ + chan->device->device_control(chan, DMA_TERMINATE_ALL, 0); if (iterations > 0) while (!kthread_should_stop()) { DECLARE_WAIT_QUEUE_HEAD_ONSTACK(wait_dmatest_exit); @@ -499,6 +514,10 @@ static void dmatest_cleanup_channel(struct dmatest_chan *dtc) list_del(&thread->node); kfree(thread); } + + /* terminate all transfers on specified channels */ + dtc->chan->device->device_control(dtc->chan, DMA_TERMINATE_ALL, 0); + kfree(dtc); } diff --git a/drivers/dma/imx-sdma.c b/drivers/dma/imx-sdma.c index 7bd7e98..b5cc27d 100644 --- a/drivers/dma/imx-sdma.c +++ b/drivers/dma/imx-sdma.c @@ -318,6 +318,7 @@ struct sdma_engine { dma_addr_t context_phys; struct dma_device dma_device; struct clk *clk; + struct mutex channel_0_lock; struct sdma_script_start_addrs *script_addrs; }; @@ -415,11 +416,15 @@ static int sdma_load_script(struct sdma_engine *sdma, void *buf, int size, dma_addr_t buf_phys; int ret; + mutex_lock(&sdma->channel_0_lock); + buf_virt = dma_alloc_coherent(NULL, size, &buf_phys, GFP_KERNEL); - if (!buf_virt) - return -ENOMEM; + if (!buf_virt) { + ret = -ENOMEM; + goto err_out; + } bd0->mode.command = C0_SETPM; bd0->mode.status = BD_DONE | BD_INTR | BD_WRAP | BD_EXTD; @@ -433,6 +438,9 @@ static int sdma_load_script(struct sdma_engine *sdma, void *buf, int size, dma_free_coherent(NULL, size, buf_virt, buf_phys); +err_out: + mutex_unlock(&sdma->channel_0_lock); + return ret; } @@ -656,6 +664,8 @@ static int sdma_load_context(struct sdma_channel *sdmac) dev_dbg(sdma->dev, "event_mask0 = 0x%08x\n", sdmac->event_mask0); dev_dbg(sdma->dev, "event_mask1 = 0x%08x\n", sdmac->event_mask1); + mutex_lock(&sdma->channel_0_lock); + memset(context, 0, sizeof(*context)); context->channel_state.pc = load_address; @@ -676,6 +686,8 @@ static int sdma_load_context(struct sdma_channel *sdmac) ret = sdma_run_channel(&sdma->channel[0]); + mutex_unlock(&sdma->channel_0_lock); + return ret; } @@ -1131,18 +1143,17 @@ static void sdma_add_scripts(struct sdma_engine *sdma, saddr_arr[i] = addr_arr[i]; } -static int __init sdma_get_firmware(struct sdma_engine *sdma, - const char *fw_name) +static void sdma_load_firmware(const struct firmware *fw, void *context) { - const struct firmware *fw; + struct sdma_engine *sdma = context; const struct sdma_firmware_header *header; - int ret; const struct sdma_script_start_addrs *addr; unsigned short *ram_code; - ret = request_firmware(&fw, fw_name, sdma->dev); - if (ret) - return ret; + if (!fw) { + dev_err(sdma->dev, "firmware not found\n"); + return; + } if (fw->size < sizeof(*header)) goto err_firmware; @@ -1172,6 +1183,16 @@ static int __init sdma_get_firmware(struct sdma_engine *sdma, err_firmware: release_firmware(fw); +} + +static int __init sdma_get_firmware(struct sdma_engine *sdma, + const char *fw_name) +{ + int ret; + + ret = request_firmware_nowait(THIS_MODULE, + FW_ACTION_HOTPLUG, fw_name, sdma->dev, + GFP_KERNEL, sdma, sdma_load_firmware); return ret; } @@ -1269,11 +1290,14 @@ static int __init sdma_probe(struct platform_device *pdev) struct sdma_platform_data *pdata = pdev->dev.platform_data; int i; struct sdma_engine *sdma; + s32 *saddr_arr; sdma = kzalloc(sizeof(*sdma), GFP_KERNEL); if (!sdma) return -ENOMEM; + mutex_init(&sdma->channel_0_lock); + sdma->dev = &pdev->dev; iores = platform_get_resource(pdev, IORESOURCE_MEM, 0); @@ -1310,6 +1334,11 @@ static int __init sdma_probe(struct platform_device *pdev) goto err_alloc; } + /* initially no scripts available */ + saddr_arr = (s32 *)sdma->script_addrs; + for (i = 0; i < SDMA_SCRIPT_ADDRS_ARRAY_SIZE_V1; i++) + saddr_arr[i] = -EINVAL; + if (of_id) pdev->id_entry = of_id->data; sdma->devtype = pdev->id_entry->driver_data; diff --git a/drivers/dma/mxs-dma.c b/drivers/dma/mxs-dma.c index be641cb..b4588bd 100644 --- a/drivers/dma/mxs-dma.c +++ b/drivers/dma/mxs-dma.c @@ -130,6 +130,23 @@ struct mxs_dma_engine { struct mxs_dma_chan mxs_chans[MXS_DMA_CHANNELS]; }; +static inline void mxs_dma_clkgate(struct mxs_dma_chan *mxs_chan, int enable) +{ + struct mxs_dma_engine *mxs_dma = mxs_chan->mxs_dma; + int chan_id = mxs_chan->chan.chan_id; + int set_clr = enable ? MXS_CLR_ADDR : MXS_SET_ADDR; + + /* enable apbh channel clock */ + if (dma_is_apbh()) { + if (apbh_is_old()) + writel(1 << (chan_id + BP_APBH_CTRL0_CLKGATE_CHANNEL), + mxs_dma->base + HW_APBHX_CTRL0 + set_clr); + else + writel(1 << chan_id, + mxs_dma->base + HW_APBHX_CTRL0 + set_clr); + } +} + static void mxs_dma_reset_chan(struct mxs_dma_chan *mxs_chan) { struct mxs_dma_engine *mxs_dma = mxs_chan->mxs_dma; @@ -148,38 +165,21 @@ static void mxs_dma_enable_chan(struct mxs_dma_chan *mxs_chan) struct mxs_dma_engine *mxs_dma = mxs_chan->mxs_dma; int chan_id = mxs_chan->chan.chan_id; + /* clkgate needs to be enabled before writing other registers */ + mxs_dma_clkgate(mxs_chan, 1); + /* set cmd_addr up */ writel(mxs_chan->ccw_phys, mxs_dma->base + HW_APBHX_CHn_NXTCMDAR(chan_id)); - /* enable apbh channel clock */ - if (dma_is_apbh()) { - if (apbh_is_old()) - writel(1 << (chan_id + BP_APBH_CTRL0_CLKGATE_CHANNEL), - mxs_dma->base + HW_APBHX_CTRL0 + MXS_CLR_ADDR); - else - writel(1 << chan_id, - mxs_dma->base + HW_APBHX_CTRL0 + MXS_CLR_ADDR); - } - /* write 1 to SEMA to kick off the channel */ writel(1, mxs_dma->base + HW_APBHX_CHn_SEMA(chan_id)); } static void mxs_dma_disable_chan(struct mxs_dma_chan *mxs_chan) { - struct mxs_dma_engine *mxs_dma = mxs_chan->mxs_dma; - int chan_id = mxs_chan->chan.chan_id; - /* disable apbh channel clock */ - if (dma_is_apbh()) { - if (apbh_is_old()) - writel(1 << (chan_id + BP_APBH_CTRL0_CLKGATE_CHANNEL), - mxs_dma->base + HW_APBHX_CTRL0 + MXS_SET_ADDR); - else - writel(1 << chan_id, - mxs_dma->base + HW_APBHX_CTRL0 + MXS_SET_ADDR); - } + mxs_dma_clkgate(mxs_chan, 0); mxs_chan->status = DMA_SUCCESS; } @@ -338,7 +338,10 @@ static int mxs_dma_alloc_chan_resources(struct dma_chan *chan) if (ret) goto err_clk; + /* clkgate needs to be enabled for reset to finish */ + mxs_dma_clkgate(mxs_chan, 1); mxs_dma_reset_chan(mxs_chan); + mxs_dma_clkgate(mxs_chan, 0); dma_async_tx_descriptor_init(&mxs_chan->desc, chan); mxs_chan->desc.tx_submit = mxs_dma_tx_submit; diff --git a/drivers/dma/pl330.c b/drivers/dma/pl330.c index 00eee59..621134f 100644 --- a/drivers/dma/pl330.c +++ b/drivers/dma/pl330.c @@ -17,6 +17,8 @@ #include <linux/interrupt.h> #include <linux/amba/bus.h> #include <linux/amba/pl330.h> +#include <linux/pm_runtime.h> +#include <linux/scatterlist.h> #define NR_DEFAULT_DESC 16 @@ -68,6 +70,14 @@ struct dma_pl330_chan { * NULL if the channel is available to be acquired. */ void *pl330_chid; + + /* For D-to-M and M-to-D channels */ + int burst_sz; /* the peripheral fifo width */ + int burst_len; /* the number of burst */ + dma_addr_t fifo_addr; + + /* for cyclic capability */ + bool cyclic; }; struct dma_pl330_dmac { @@ -83,6 +93,8 @@ struct dma_pl330_dmac { /* Peripheral channels connected to this DMAC */ struct dma_pl330_chan *peripherals; /* keep at end */ + + struct clk *clk; }; struct dma_pl330_desc { @@ -152,6 +164,31 @@ static inline void free_desc_list(struct list_head *list) spin_unlock_irqrestore(&pdmac->pool_lock, flags); } +static inline void handle_cyclic_desc_list(struct list_head *list) +{ + struct dma_pl330_desc *desc; + struct dma_pl330_chan *pch; + unsigned long flags; + + if (list_empty(list)) + return; + + list_for_each_entry(desc, list, node) { + dma_async_tx_callback callback; + + /* Change status to reload it */ + desc->status = PREP; + pch = desc->pchan; + callback = desc->txd.callback; + if (callback) + callback(desc->txd.callback_param); + } + + spin_lock_irqsave(&pch->lock, flags); + list_splice_tail_init(list, &pch->work_list); + spin_unlock_irqrestore(&pch->lock, flags); +} + static inline void fill_queue(struct dma_pl330_chan *pch) { struct dma_pl330_desc *desc; @@ -205,7 +242,10 @@ static void pl330_tasklet(unsigned long data) spin_unlock_irqrestore(&pch->lock, flags); - free_desc_list(&list); + if (pch->cyclic) + handle_cyclic_desc_list(&list); + else + free_desc_list(&list); } static void dma_pl330_rqcb(void *token, enum pl330_op_err err) @@ -236,6 +276,7 @@ static int pl330_alloc_chan_resources(struct dma_chan *chan) spin_lock_irqsave(&pch->lock, flags); pch->completed = chan->cookie = 1; + pch->cyclic = false; pch->pl330_chid = pl330_request_channel(&pdmac->pif); if (!pch->pl330_chid) { @@ -253,25 +294,52 @@ static int pl330_alloc_chan_resources(struct dma_chan *chan) static int pl330_control(struct dma_chan *chan, enum dma_ctrl_cmd cmd, unsigned long arg) { struct dma_pl330_chan *pch = to_pchan(chan); - struct dma_pl330_desc *desc; + struct dma_pl330_desc *desc, *_dt; unsigned long flags; + struct dma_pl330_dmac *pdmac = pch->dmac; + struct dma_slave_config *slave_config; + LIST_HEAD(list); - /* Only supports DMA_TERMINATE_ALL */ - if (cmd != DMA_TERMINATE_ALL) - return -ENXIO; - - spin_lock_irqsave(&pch->lock, flags); - - /* FLUSH the PL330 Channel thread */ - pl330_chan_ctrl(pch->pl330_chid, PL330_OP_FLUSH); + switch (cmd) { + case DMA_TERMINATE_ALL: + spin_lock_irqsave(&pch->lock, flags); - /* Mark all desc done */ - list_for_each_entry(desc, &pch->work_list, node) - desc->status = DONE; + /* FLUSH the PL330 Channel thread */ + pl330_chan_ctrl(pch->pl330_chid, PL330_OP_FLUSH); - spin_unlock_irqrestore(&pch->lock, flags); + /* Mark all desc done */ + list_for_each_entry_safe(desc, _dt, &pch->work_list , node) { + desc->status = DONE; + pch->completed = desc->txd.cookie; + list_move_tail(&desc->node, &list); + } - pl330_tasklet((unsigned long) pch); + list_splice_tail_init(&list, &pdmac->desc_pool); + spin_unlock_irqrestore(&pch->lock, flags); + break; + case DMA_SLAVE_CONFIG: + slave_config = (struct dma_slave_config *)arg; + + if (slave_config->direction == DMA_TO_DEVICE) { + if (slave_config->dst_addr) + pch->fifo_addr = slave_config->dst_addr; + if (slave_config->dst_addr_width) + pch->burst_sz = __ffs(slave_config->dst_addr_width); + if (slave_config->dst_maxburst) + pch->burst_len = slave_config->dst_maxburst; + } else if (slave_config->direction == DMA_FROM_DEVICE) { + if (slave_config->src_addr) + pch->fifo_addr = slave_config->src_addr; + if (slave_config->src_addr_width) + pch->burst_sz = __ffs(slave_config->src_addr_width); + if (slave_config->src_maxburst) + pch->burst_len = slave_config->src_maxburst; + } + break; + default: + dev_err(pch->dmac->pif.dev, "Not supported command.\n"); + return -ENXIO; + } return 0; } @@ -288,6 +356,9 @@ static void pl330_free_chan_resources(struct dma_chan *chan) pl330_release_channel(pch->pl330_chid); pch->pl330_chid = NULL; + if (pch->cyclic) + list_splice_tail_init(&pch->work_list, &pch->dmac->desc_pool); + spin_unlock_irqrestore(&pch->lock, flags); } @@ -453,7 +524,7 @@ static struct dma_pl330_desc *pl330_get_desc(struct dma_pl330_chan *pch) if (peri) { desc->req.rqtype = peri->rqtype; - desc->req.peri = peri->peri_id; + desc->req.peri = pch->chan.chan_id; } else { desc->req.rqtype = MEMTOMEM; desc->req.peri = 0; @@ -524,6 +595,51 @@ static inline int get_burst_len(struct dma_pl330_desc *desc, size_t len) return burst_len; } +static struct dma_async_tx_descriptor *pl330_prep_dma_cyclic( + struct dma_chan *chan, dma_addr_t dma_addr, size_t len, + size_t period_len, enum dma_data_direction direction) +{ + struct dma_pl330_desc *desc; + struct dma_pl330_chan *pch = to_pchan(chan); + dma_addr_t dst; + dma_addr_t src; + + desc = pl330_get_desc(pch); + if (!desc) { + dev_err(pch->dmac->pif.dev, "%s:%d Unable to fetch desc\n", + __func__, __LINE__); + return NULL; + } + + switch (direction) { + case DMA_TO_DEVICE: + desc->rqcfg.src_inc = 1; + desc->rqcfg.dst_inc = 0; + src = dma_addr; + dst = pch->fifo_addr; + break; + case DMA_FROM_DEVICE: + desc->rqcfg.src_inc = 0; + desc->rqcfg.dst_inc = 1; + src = pch->fifo_addr; + dst = dma_addr; + break; + default: + dev_err(pch->dmac->pif.dev, "%s:%d Invalid dma direction\n", + __func__, __LINE__); + return NULL; + } + + desc->rqcfg.brst_size = pch->burst_sz; + desc->rqcfg.brst_len = 1; + + pch->cyclic = true; + + fill_px(&desc->px, dst, src, period_len); + + return &desc->txd; +} + static struct dma_async_tx_descriptor * pl330_prep_dma_memcpy(struct dma_chan *chan, dma_addr_t dst, dma_addr_t src, size_t len, unsigned long flags) @@ -579,7 +695,7 @@ pl330_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, struct dma_pl330_peri *peri = chan->private; struct scatterlist *sg; unsigned long flags; - int i, burst_size; + int i; dma_addr_t addr; if (unlikely(!pch || !sgl || !sg_len || !peri)) @@ -595,8 +711,7 @@ pl330_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, return NULL; } - addr = peri->fifo_addr; - burst_size = peri->burst_sz; + addr = pch->fifo_addr; first = NULL; @@ -644,7 +759,7 @@ pl330_prep_slave_sg(struct dma_chan *chan, struct scatterlist *sgl, sg_dma_address(sg), addr, sg_dma_len(sg)); } - desc->rqcfg.brst_size = burst_size; + desc->rqcfg.brst_size = pch->burst_sz; desc->rqcfg.brst_len = 1; } @@ -696,6 +811,30 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id) goto probe_err1; } + pdmac->clk = clk_get(&adev->dev, "dma"); + if (IS_ERR(pdmac->clk)) { + dev_err(&adev->dev, "Cannot get operation clock.\n"); + ret = -EINVAL; + goto probe_err1; + } + + amba_set_drvdata(adev, pdmac); + +#ifdef CONFIG_PM_RUNTIME + /* to use the runtime PM helper functions */ + pm_runtime_enable(&adev->dev); + + /* enable the power domain */ + if (pm_runtime_get_sync(&adev->dev)) { + dev_err(&adev->dev, "failed to get runtime pm\n"); + ret = -ENODEV; + goto probe_err1; + } +#else + /* enable dma clk */ + clk_enable(pdmac->clk); +#endif + irq = adev->irq[0]; ret = request_irq(irq, pl330_irq_handler, 0, dev_name(&adev->dev), pi); @@ -732,6 +871,7 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id) case MEMTODEV: case DEVTOMEM: dma_cap_set(DMA_SLAVE, pd->cap_mask); + dma_cap_set(DMA_CYCLIC, pd->cap_mask); break; default: dev_err(&adev->dev, "DEVTODEV Not Supported\n"); @@ -760,6 +900,7 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id) pd->device_alloc_chan_resources = pl330_alloc_chan_resources; pd->device_free_chan_resources = pl330_free_chan_resources; pd->device_prep_dma_memcpy = pl330_prep_dma_memcpy; + pd->device_prep_dma_cyclic = pl330_prep_dma_cyclic; pd->device_tx_status = pl330_tx_status; pd->device_prep_slave_sg = pl330_prep_slave_sg; pd->device_control = pl330_control; @@ -771,8 +912,6 @@ pl330_probe(struct amba_device *adev, const struct amba_id *id) goto probe_err4; } - amba_set_drvdata(adev, pdmac); - dev_info(&adev->dev, "Loaded driver for PL330 DMAC-%d\n", adev->periphid); dev_info(&adev->dev, @@ -833,6 +972,13 @@ static int __devexit pl330_remove(struct amba_device *adev) res = &adev->res; release_mem_region(res->start, resource_size(res)); +#ifdef CONFIG_PM_RUNTIME + pm_runtime_put(&adev->dev); + pm_runtime_disable(&adev->dev); +#else + clk_disable(pdmac->clk); +#endif + kfree(pdmac); return 0; @@ -846,10 +992,49 @@ static struct amba_id pl330_ids[] = { { 0, 0 }, }; +#ifdef CONFIG_PM_RUNTIME +static int pl330_runtime_suspend(struct device *dev) +{ + struct dma_pl330_dmac *pdmac = dev_get_drvdata(dev); + + if (!pdmac) { + dev_err(dev, "failed to get dmac\n"); + return -ENODEV; + } + + clk_disable(pdmac->clk); + + return 0; +} + +static int pl330_runtime_resume(struct device *dev) +{ + struct dma_pl330_dmac *pdmac = dev_get_drvdata(dev); + + if (!pdmac) { + dev_err(dev, "failed to get dmac\n"); + return -ENODEV; + } + + clk_enable(pdmac->clk); + + return 0; +} +#else +#define pl330_runtime_suspend NULL +#define pl330_runtime_resume NULL +#endif /* CONFIG_PM_RUNTIME */ + +static const struct dev_pm_ops pl330_pm_ops = { + .runtime_suspend = pl330_runtime_suspend, + .runtime_resume = pl330_runtime_resume, +}; + static struct amba_driver pl330_driver = { .drv = { .owner = THIS_MODULE, .name = "dma-pl330", + .pm = &pl330_pm_ops, }, .id_table = pl330_ids, .probe = pl330_probe, diff --git a/drivers/firewire/ohci.c b/drivers/firewire/ohci.c index 57cd3a4..fd7170a 100644 --- a/drivers/firewire/ohci.c +++ b/drivers/firewire/ohci.c @@ -290,6 +290,9 @@ static const struct { {PCI_VENDOR_ID_NEC, PCI_ANY_ID, PCI_ANY_ID, QUIRK_CYCLE_TIMER}, + {PCI_VENDOR_ID_O2, PCI_ANY_ID, PCI_ANY_ID, + QUIRK_NO_MSI}, + {PCI_VENDOR_ID_RICOH, PCI_ANY_ID, PCI_ANY_ID, QUIRK_CYCLE_TIMER}, diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index d539efd..ca44d2c 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -95,10 +95,6 @@ config GPIO_EP93XX depends on ARCH_EP93XX select GPIO_GENERIC -config GPIO_EXYNOS4 - def_bool y - depends on CPU_EXYNOS4210 - config GPIO_MPC5200 def_bool y depends on PPC_MPC52xx @@ -131,18 +127,6 @@ config GPIO_MXS select GPIO_GENERIC select GENERIC_IRQ_CHIP -config GPIO_PLAT_SAMSUNG - def_bool y - depends on SAMSUNG_GPIOLIB_4BIT - -config GPIO_S5PC100 - def_bool y - depends on CPU_S5PC100 - -config GPIO_S5PV210 - def_bool y - depends on CPU_S5PV210 - config GPIO_PL061 bool "PrimeCell PL061 GPIO support" depends on ARM_AMBA diff --git a/drivers/gpio/Makefile b/drivers/gpio/Makefile index 9588948..62db458 100644 --- a/drivers/gpio/Makefile +++ b/drivers/gpio/Makefile @@ -15,7 +15,6 @@ obj-$(CONFIG_GPIO_BT8XX) += gpio-bt8xx.o obj-$(CONFIG_GPIO_CS5535) += gpio-cs5535.o obj-$(CONFIG_GPIO_DA9052) += gpio-da9052.o obj-$(CONFIG_GPIO_EP93XX) += gpio-ep93xx.o -obj-$(CONFIG_GPIO_EXYNOS4) += gpio-exynos4.o obj-$(CONFIG_GPIO_IT8761E) += gpio-it8761e.o obj-$(CONFIG_GPIO_JANZ_TTL) += gpio-janz-ttl.o obj-$(CONFIG_GPIO_LANGWELL) += gpio-langwell.o @@ -38,11 +37,7 @@ obj-$(CONFIG_GPIO_PCF857X) += gpio-pcf857x.o obj-$(CONFIG_GPIO_PCH) += gpio-pch.o obj-$(CONFIG_GPIO_PL061) += gpio-pl061.o obj-$(CONFIG_GPIO_RDC321X) += gpio-rdc321x.o - -obj-$(CONFIG_GPIO_PLAT_SAMSUNG) += gpio-plat-samsung.o -obj-$(CONFIG_GPIO_S5PC100) += gpio-s5pc100.o -obj-$(CONFIG_GPIO_S5PV210) += gpio-s5pv210.o - +obj-$(CONFIG_PLAT_SAMSUNG) += gpio-samsung.o obj-$(CONFIG_GPIO_SCH) += gpio-sch.o obj-$(CONFIG_GPIO_STMPE) += gpio-stmpe.o obj-$(CONFIG_GPIO_SX150X) += gpio-sx150x.o diff --git a/drivers/gpio/gpio-exynos4.c b/drivers/gpio/gpio-exynos4.c deleted file mode 100644 index d24b337..0000000 --- a/drivers/gpio/gpio-exynos4.c +++ /dev/null @@ -1,385 +0,0 @@ -/* - * EXYNOS4 - GPIOlib support - * - * Copyright (c) 2010-2011 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. -*/ - -#include <linux/kernel.h> -#include <linux/irq.h> -#include <linux/io.h> -#include <linux/gpio.h> - -#include <mach/map.h> - -#include <plat/gpio-core.h> -#include <plat/gpio-cfg.h> -#include <plat/gpio-cfg-helpers.h> - -int s3c_gpio_setpull_exynos4(struct s3c_gpio_chip *chip, - unsigned int off, s3c_gpio_pull_t pull) -{ - if (pull == S3C_GPIO_PULL_UP) - pull = 3; - - return s3c_gpio_setpull_updown(chip, off, pull); -} - -s3c_gpio_pull_t s3c_gpio_getpull_exynos4(struct s3c_gpio_chip *chip, - unsigned int off) -{ - s3c_gpio_pull_t pull; - - pull = s3c_gpio_getpull_updown(chip, off); - if (pull == 3) - pull = S3C_GPIO_PULL_UP; - - return pull; -} - -static struct s3c_gpio_cfg gpio_cfg = { - .set_config = s3c_gpio_setcfg_s3c64xx_4bit, - .set_pull = s3c_gpio_setpull_exynos4, - .get_pull = s3c_gpio_getpull_exynos4, -}; - -static struct s3c_gpio_cfg gpio_cfg_noint = { - .set_config = s3c_gpio_setcfg_s3c64xx_4bit, - .set_pull = s3c_gpio_setpull_exynos4, - .get_pull = s3c_gpio_getpull_exynos4, -}; - -/* - * Following are the gpio banks in v310. - * - * The 'config' member when left to NULL, is initialized to the default - * structure gpio_cfg in the init function below. - * - * The 'base' member is also initialized in the init function below. - * Note: The initialization of 'base' member of s3c_gpio_chip structure - * uses the above macro and depends on the banks being listed in order here. - */ -static struct s3c_gpio_chip exynos4_gpio_part1_4bit[] = { - { - .chip = { - .base = EXYNOS4_GPA0(0), - .ngpio = EXYNOS4_GPIO_A0_NR, - .label = "GPA0", - }, - }, { - .chip = { - .base = EXYNOS4_GPA1(0), - .ngpio = EXYNOS4_GPIO_A1_NR, - .label = "GPA1", - }, - }, { - .chip = { - .base = EXYNOS4_GPB(0), - .ngpio = EXYNOS4_GPIO_B_NR, - .label = "GPB", - }, - }, { - .chip = { - .base = EXYNOS4_GPC0(0), - .ngpio = EXYNOS4_GPIO_C0_NR, - .label = "GPC0", - }, - }, { - .chip = { - .base = EXYNOS4_GPC1(0), - .ngpio = EXYNOS4_GPIO_C1_NR, - .label = "GPC1", - }, - }, { - .chip = { - .base = EXYNOS4_GPD0(0), - .ngpio = EXYNOS4_GPIO_D0_NR, - .label = "GPD0", - }, - }, { - .chip = { - .base = EXYNOS4_GPD1(0), - .ngpio = EXYNOS4_GPIO_D1_NR, - .label = "GPD1", - }, - }, { - .chip = { - .base = EXYNOS4_GPE0(0), - .ngpio = EXYNOS4_GPIO_E0_NR, - .label = "GPE0", - }, - }, { - .chip = { - .base = EXYNOS4_GPE1(0), - .ngpio = EXYNOS4_GPIO_E1_NR, - .label = "GPE1", - }, - }, { - .chip = { - .base = EXYNOS4_GPE2(0), - .ngpio = EXYNOS4_GPIO_E2_NR, - .label = "GPE2", - }, - }, { - .chip = { - .base = EXYNOS4_GPE3(0), - .ngpio = EXYNOS4_GPIO_E3_NR, - .label = "GPE3", - }, - }, { - .chip = { - .base = EXYNOS4_GPE4(0), - .ngpio = EXYNOS4_GPIO_E4_NR, - .label = "GPE4", - }, - }, { - .chip = { - .base = EXYNOS4_GPF0(0), - .ngpio = EXYNOS4_GPIO_F0_NR, - .label = "GPF0", - }, - }, { - .chip = { - .base = EXYNOS4_GPF1(0), - .ngpio = EXYNOS4_GPIO_F1_NR, - .label = "GPF1", - }, - }, { - .chip = { - .base = EXYNOS4_GPF2(0), - .ngpio = EXYNOS4_GPIO_F2_NR, - .label = "GPF2", - }, - }, { - .chip = { - .base = EXYNOS4_GPF3(0), - .ngpio = EXYNOS4_GPIO_F3_NR, - .label = "GPF3", - }, - }, -}; - -static struct s3c_gpio_chip exynos4_gpio_part2_4bit[] = { - { - .chip = { - .base = EXYNOS4_GPJ0(0), - .ngpio = EXYNOS4_GPIO_J0_NR, - .label = "GPJ0", - }, - }, { - .chip = { - .base = EXYNOS4_GPJ1(0), - .ngpio = EXYNOS4_GPIO_J1_NR, - .label = "GPJ1", - }, - }, { - .chip = { - .base = EXYNOS4_GPK0(0), - .ngpio = EXYNOS4_GPIO_K0_NR, - .label = "GPK0", - }, - }, { - .chip = { - .base = EXYNOS4_GPK1(0), - .ngpio = EXYNOS4_GPIO_K1_NR, - .label = "GPK1", - }, - }, { - .chip = { - .base = EXYNOS4_GPK2(0), - .ngpio = EXYNOS4_GPIO_K2_NR, - .label = "GPK2", - }, - }, { - .chip = { - .base = EXYNOS4_GPK3(0), - .ngpio = EXYNOS4_GPIO_K3_NR, - .label = "GPK3", - }, - }, { - .chip = { - .base = EXYNOS4_GPL0(0), - .ngpio = EXYNOS4_GPIO_L0_NR, - .label = "GPL0", - }, - }, { - .chip = { - .base = EXYNOS4_GPL1(0), - .ngpio = EXYNOS4_GPIO_L1_NR, - .label = "GPL1", - }, - }, { - .chip = { - .base = EXYNOS4_GPL2(0), - .ngpio = EXYNOS4_GPIO_L2_NR, - .label = "GPL2", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = EXYNOS4_GPY0(0), - .ngpio = EXYNOS4_GPIO_Y0_NR, - .label = "GPY0", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = EXYNOS4_GPY1(0), - .ngpio = EXYNOS4_GPIO_Y1_NR, - .label = "GPY1", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = EXYNOS4_GPY2(0), - .ngpio = EXYNOS4_GPIO_Y2_NR, - .label = "GPY2", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = EXYNOS4_GPY3(0), - .ngpio = EXYNOS4_GPIO_Y3_NR, - .label = "GPY3", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = EXYNOS4_GPY4(0), - .ngpio = EXYNOS4_GPIO_Y4_NR, - .label = "GPY4", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = EXYNOS4_GPY5(0), - .ngpio = EXYNOS4_GPIO_Y5_NR, - .label = "GPY5", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = EXYNOS4_GPY6(0), - .ngpio = EXYNOS4_GPIO_Y6_NR, - .label = "GPY6", - }, - }, { - .base = (S5P_VA_GPIO2 + 0xC00), - .config = &gpio_cfg_noint, - .irq_base = IRQ_EINT(0), - .chip = { - .base = EXYNOS4_GPX0(0), - .ngpio = EXYNOS4_GPIO_X0_NR, - .label = "GPX0", - .to_irq = samsung_gpiolib_to_irq, - }, - }, { - .base = (S5P_VA_GPIO2 + 0xC20), - .config = &gpio_cfg_noint, - .irq_base = IRQ_EINT(8), - .chip = { - .base = EXYNOS4_GPX1(0), - .ngpio = EXYNOS4_GPIO_X1_NR, - .label = "GPX1", - .to_irq = samsung_gpiolib_to_irq, - }, - }, { - .base = (S5P_VA_GPIO2 + 0xC40), - .config = &gpio_cfg_noint, - .irq_base = IRQ_EINT(16), - .chip = { - .base = EXYNOS4_GPX2(0), - .ngpio = EXYNOS4_GPIO_X2_NR, - .label = "GPX2", - .to_irq = samsung_gpiolib_to_irq, - }, - }, { - .base = (S5P_VA_GPIO2 + 0xC60), - .config = &gpio_cfg_noint, - .irq_base = IRQ_EINT(24), - .chip = { - .base = EXYNOS4_GPX3(0), - .ngpio = EXYNOS4_GPIO_X3_NR, - .label = "GPX3", - .to_irq = samsung_gpiolib_to_irq, - }, - }, -}; - -static struct s3c_gpio_chip exynos4_gpio_part3_4bit[] = { - { - .chip = { - .base = EXYNOS4_GPZ(0), - .ngpio = EXYNOS4_GPIO_Z_NR, - .label = "GPZ", - }, - }, -}; - -static __init int exynos4_gpiolib_init(void) -{ - struct s3c_gpio_chip *chip; - int i; - int group = 0; - int nr_chips; - - /* GPIO part 1 */ - - chip = exynos4_gpio_part1_4bit; - nr_chips = ARRAY_SIZE(exynos4_gpio_part1_4bit); - - for (i = 0; i < nr_chips; i++, chip++) { - if (chip->config == NULL) { - chip->config = &gpio_cfg; - /* Assign the GPIO interrupt group */ - chip->group = group++; - } - if (chip->base == NULL) - chip->base = S5P_VA_GPIO1 + (i) * 0x20; - } - - samsung_gpiolib_add_4bit_chips(exynos4_gpio_part1_4bit, nr_chips); - - /* GPIO part 2 */ - - chip = exynos4_gpio_part2_4bit; - nr_chips = ARRAY_SIZE(exynos4_gpio_part2_4bit); - - for (i = 0; i < nr_chips; i++, chip++) { - if (chip->config == NULL) { - chip->config = &gpio_cfg; - /* Assign the GPIO interrupt group */ - chip->group = group++; - } - if (chip->base == NULL) - chip->base = S5P_VA_GPIO2 + (i) * 0x20; - } - - samsung_gpiolib_add_4bit_chips(exynos4_gpio_part2_4bit, nr_chips); - - /* GPIO part 3 */ - - chip = exynos4_gpio_part3_4bit; - nr_chips = ARRAY_SIZE(exynos4_gpio_part3_4bit); - - for (i = 0; i < nr_chips; i++, chip++) { - if (chip->config == NULL) { - chip->config = &gpio_cfg; - /* Assign the GPIO interrupt group */ - chip->group = group++; - } - if (chip->base == NULL) - chip->base = S5P_VA_GPIO3 + (i) * 0x20; - } - - samsung_gpiolib_add_4bit_chips(exynos4_gpio_part3_4bit, nr_chips); - s5p_register_gpioint_bank(IRQ_GPIO_XA, 0, IRQ_GPIO1_NR_GROUPS); - s5p_register_gpioint_bank(IRQ_GPIO_XB, IRQ_GPIO1_NR_GROUPS, IRQ_GPIO2_NR_GROUPS); - - return 0; -} -core_initcall(exynos4_gpiolib_init); diff --git a/drivers/gpio/gpio-generic.c b/drivers/gpio/gpio-generic.c index 231714d..4e24436 100644 --- a/drivers/gpio/gpio-generic.c +++ b/drivers/gpio/gpio-generic.c @@ -351,7 +351,7 @@ static int bgpio_setup_direction(struct bgpio_chip *bgc, return 0; } -int __devexit bgpio_remove(struct bgpio_chip *bgc) +int bgpio_remove(struct bgpio_chip *bgc) { int err = gpiochip_remove(&bgc->gc); @@ -361,15 +361,10 @@ int __devexit bgpio_remove(struct bgpio_chip *bgc) } EXPORT_SYMBOL_GPL(bgpio_remove); -int __devinit bgpio_init(struct bgpio_chip *bgc, - struct device *dev, - unsigned long sz, - void __iomem *dat, - void __iomem *set, - void __iomem *clr, - void __iomem *dirout, - void __iomem *dirin, - bool big_endian) +int bgpio_init(struct bgpio_chip *bgc, struct device *dev, + unsigned long sz, void __iomem *dat, void __iomem *set, + void __iomem *clr, void __iomem *dirout, void __iomem *dirin, + bool big_endian) { int ret; diff --git a/drivers/gpio/gpio-plat-samsung.c b/drivers/gpio/gpio-plat-samsung.c deleted file mode 100644 index ef67f19..0000000 --- a/drivers/gpio/gpio-plat-samsung.c +++ /dev/null @@ -1,205 +0,0 @@ -/* - * Copyright 2008 Openmoko, Inc. - * Copyright 2008 Simtec Electronics - * Ben Dooks <ben@simtec.co.uk> - * http://armlinux.simtec.co.uk/ - * - * Copyright (c) 2009 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * SAMSUNG - GPIOlib support - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/irq.h> -#include <linux/io.h> -#include <linux/gpio.h> -#include <plat/gpio-core.h> -#include <plat/gpio-cfg.h> -#include <plat/gpio-cfg-helpers.h> - -#ifndef DEBUG_GPIO -#define gpio_dbg(x...) do { } while (0) -#else -#define gpio_dbg(x...) printk(KERN_DEBUG x) -#endif - -/* The samsung_gpiolib_4bit routines are to control the gpio banks where - * the gpio configuration register (GPxCON) has 4 bits per GPIO, as the - * following example: - * - * base + 0x00: Control register, 4 bits per gpio - * gpio n: 4 bits starting at (4*n) - * 0000 = input, 0001 = output, others mean special-function - * base + 0x04: Data register, 1 bit per gpio - * bit n: data bit n - * - * Note, since the data register is one bit per gpio and is at base + 0x4 - * we can use s3c_gpiolib_get and s3c_gpiolib_set to change the state of - * the output. -*/ - -static int samsung_gpiolib_4bit_input(struct gpio_chip *chip, - unsigned int offset) -{ - struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); - void __iomem *base = ourchip->base; - unsigned long con; - - con = __raw_readl(base + GPIOCON_OFF); - con &= ~(0xf << con_4bit_shift(offset)); - __raw_writel(con, base + GPIOCON_OFF); - - gpio_dbg("%s: %p: CON now %08lx\n", __func__, base, con); - - return 0; -} - -static int samsung_gpiolib_4bit_output(struct gpio_chip *chip, - unsigned int offset, int value) -{ - struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); - void __iomem *base = ourchip->base; - unsigned long con; - unsigned long dat; - - con = __raw_readl(base + GPIOCON_OFF); - con &= ~(0xf << con_4bit_shift(offset)); - con |= 0x1 << con_4bit_shift(offset); - - dat = __raw_readl(base + GPIODAT_OFF); - - if (value) - dat |= 1 << offset; - else - dat &= ~(1 << offset); - - __raw_writel(dat, base + GPIODAT_OFF); - __raw_writel(con, base + GPIOCON_OFF); - __raw_writel(dat, base + GPIODAT_OFF); - - gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat); - - return 0; -} - -/* The next set of routines are for the case where the GPIO configuration - * registers are 4 bits per GPIO but there is more than one register (the - * bank has more than 8 GPIOs. - * - * This case is the similar to the 4 bit case, but the registers are as - * follows: - * - * base + 0x00: Control register, 4 bits per gpio (lower 8 GPIOs) - * gpio n: 4 bits starting at (4*n) - * 0000 = input, 0001 = output, others mean special-function - * base + 0x04: Control register, 4 bits per gpio (up to 8 additions GPIOs) - * gpio n: 4 bits starting at (4*n) - * 0000 = input, 0001 = output, others mean special-function - * base + 0x08: Data register, 1 bit per gpio - * bit n: data bit n - * - * To allow us to use the s3c_gpiolib_get and s3c_gpiolib_set routines we - * store the 'base + 0x4' address so that these routines see the data - * register at ourchip->base + 0x04. - */ - -static int samsung_gpiolib_4bit2_input(struct gpio_chip *chip, - unsigned int offset) -{ - struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); - void __iomem *base = ourchip->base; - void __iomem *regcon = base; - unsigned long con; - - if (offset > 7) - offset -= 8; - else - regcon -= 4; - - con = __raw_readl(regcon); - con &= ~(0xf << con_4bit_shift(offset)); - __raw_writel(con, regcon); - - gpio_dbg("%s: %p: CON %08lx\n", __func__, base, con); - - return 0; -} - -static int samsung_gpiolib_4bit2_output(struct gpio_chip *chip, - unsigned int offset, int value) -{ - struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); - void __iomem *base = ourchip->base; - void __iomem *regcon = base; - unsigned long con; - unsigned long dat; - unsigned con_offset = offset; - - if (con_offset > 7) - con_offset -= 8; - else - regcon -= 4; - - con = __raw_readl(regcon); - con &= ~(0xf << con_4bit_shift(con_offset)); - con |= 0x1 << con_4bit_shift(con_offset); - - dat = __raw_readl(base + GPIODAT_OFF); - - if (value) - dat |= 1 << offset; - else - dat &= ~(1 << offset); - - __raw_writel(dat, base + GPIODAT_OFF); - __raw_writel(con, regcon); - __raw_writel(dat, base + GPIODAT_OFF); - - gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat); - - return 0; -} - -void __init samsung_gpiolib_add_4bit(struct s3c_gpio_chip *chip) -{ - chip->chip.direction_input = samsung_gpiolib_4bit_input; - chip->chip.direction_output = samsung_gpiolib_4bit_output; - chip->pm = __gpio_pm(&s3c_gpio_pm_4bit); -} - -void __init samsung_gpiolib_add_4bit2(struct s3c_gpio_chip *chip) -{ - chip->chip.direction_input = samsung_gpiolib_4bit2_input; - chip->chip.direction_output = samsung_gpiolib_4bit2_output; - chip->pm = __gpio_pm(&s3c_gpio_pm_4bit); -} - -void __init samsung_gpiolib_add_4bit_chips(struct s3c_gpio_chip *chip, - int nr_chips) -{ - for (; nr_chips > 0; nr_chips--, chip++) { - samsung_gpiolib_add_4bit(chip); - s3c_gpiolib_add(chip); - } -} - -void __init samsung_gpiolib_add_4bit2_chips(struct s3c_gpio_chip *chip, - int nr_chips) -{ - for (; nr_chips > 0; nr_chips--, chip++) { - samsung_gpiolib_add_4bit2(chip); - s3c_gpiolib_add(chip); - } -} - -void __init samsung_gpiolib_add_2bit_chips(struct s3c_gpio_chip *chip, - int nr_chips) -{ - for (; nr_chips > 0; nr_chips--, chip++) - s3c_gpiolib_add(chip); -} diff --git a/drivers/gpio/gpio-s5pc100.c b/drivers/gpio/gpio-s5pc100.c deleted file mode 100644 index 7f87b0c..0000000 --- a/drivers/gpio/gpio-s5pc100.c +++ /dev/null @@ -1,354 +0,0 @@ -/* - * S5PC100 - GPIOlib support - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com - * - * Copyright 2009 Samsung Electronics Co - * Kyungmin Park <kyungmin.park@samsung.com> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/irq.h> -#include <linux/io.h> -#include <linux/gpio.h> - -#include <mach/map.h> -#include <mach/regs-gpio.h> - -#include <plat/gpio-core.h> -#include <plat/gpio-cfg.h> -#include <plat/gpio-cfg-helpers.h> - -/* S5PC100 GPIO bank summary: - * - * Bank GPIOs Style INT Type - * A0 8 4Bit GPIO_INT0 - * A1 5 4Bit GPIO_INT1 - * B 8 4Bit GPIO_INT2 - * C 5 4Bit GPIO_INT3 - * D 7 4Bit GPIO_INT4 - * E0 8 4Bit GPIO_INT5 - * E1 6 4Bit GPIO_INT6 - * F0 8 4Bit GPIO_INT7 - * F1 8 4Bit GPIO_INT8 - * F2 8 4Bit GPIO_INT9 - * F3 4 4Bit GPIO_INT10 - * G0 8 4Bit GPIO_INT11 - * G1 3 4Bit GPIO_INT12 - * G2 7 4Bit GPIO_INT13 - * G3 7 4Bit GPIO_INT14 - * H0 8 4Bit WKUP_INT - * H1 8 4Bit WKUP_INT - * H2 8 4Bit WKUP_INT - * H3 8 4Bit WKUP_INT - * I 8 4Bit GPIO_INT15 - * J0 8 4Bit GPIO_INT16 - * J1 5 4Bit GPIO_INT17 - * J2 8 4Bit GPIO_INT18 - * J3 8 4Bit GPIO_INT19 - * J4 4 4Bit GPIO_INT20 - * K0 8 4Bit None - * K1 6 4Bit None - * K2 8 4Bit None - * K3 8 4Bit None - * L0 8 4Bit None - * L1 8 4Bit None - * L2 8 4Bit None - * L3 8 4Bit None - */ - -static struct s3c_gpio_cfg gpio_cfg = { - .set_config = s3c_gpio_setcfg_s3c64xx_4bit, - .set_pull = s3c_gpio_setpull_updown, - .get_pull = s3c_gpio_getpull_updown, -}; - -static struct s3c_gpio_cfg gpio_cfg_eint = { - .cfg_eint = 0xf, - .set_config = s3c_gpio_setcfg_s3c64xx_4bit, - .set_pull = s3c_gpio_setpull_updown, - .get_pull = s3c_gpio_getpull_updown, -}; - -static struct s3c_gpio_cfg gpio_cfg_noint = { - .set_config = s3c_gpio_setcfg_s3c64xx_4bit, - .set_pull = s3c_gpio_setpull_updown, - .get_pull = s3c_gpio_getpull_updown, -}; - -/* - * GPIO bank's base address given the index of the bank in the - * list of all gpio banks. - */ -#define S5PC100_BANK_BASE(bank_nr) (S5P_VA_GPIO + ((bank_nr) * 0x20)) - -/* - * Following are the gpio banks in S5PC100. - * - * The 'config' member when left to NULL, is initialized to the default - * structure gpio_cfg in the init function below. - * - * The 'base' member is also initialized in the init function below. - * Note: The initialization of 'base' member of s3c_gpio_chip structure - * uses the above macro and depends on the banks being listed in order here. - */ -static struct s3c_gpio_chip s5pc100_gpio_chips[] = { - { - .chip = { - .base = S5PC100_GPA0(0), - .ngpio = S5PC100_GPIO_A0_NR, - .label = "GPA0", - }, - }, { - .chip = { - .base = S5PC100_GPA1(0), - .ngpio = S5PC100_GPIO_A1_NR, - .label = "GPA1", - }, - }, { - .chip = { - .base = S5PC100_GPB(0), - .ngpio = S5PC100_GPIO_B_NR, - .label = "GPB", - }, - }, { - .chip = { - .base = S5PC100_GPC(0), - .ngpio = S5PC100_GPIO_C_NR, - .label = "GPC", - }, - }, { - .chip = { - .base = S5PC100_GPD(0), - .ngpio = S5PC100_GPIO_D_NR, - .label = "GPD", - }, - }, { - .chip = { - .base = S5PC100_GPE0(0), - .ngpio = S5PC100_GPIO_E0_NR, - .label = "GPE0", - }, - }, { - .chip = { - .base = S5PC100_GPE1(0), - .ngpio = S5PC100_GPIO_E1_NR, - .label = "GPE1", - }, - }, { - .chip = { - .base = S5PC100_GPF0(0), - .ngpio = S5PC100_GPIO_F0_NR, - .label = "GPF0", - }, - }, { - .chip = { - .base = S5PC100_GPF1(0), - .ngpio = S5PC100_GPIO_F1_NR, - .label = "GPF1", - }, - }, { - .chip = { - .base = S5PC100_GPF2(0), - .ngpio = S5PC100_GPIO_F2_NR, - .label = "GPF2", - }, - }, { - .chip = { - .base = S5PC100_GPF3(0), - .ngpio = S5PC100_GPIO_F3_NR, - .label = "GPF3", - }, - }, { - .chip = { - .base = S5PC100_GPG0(0), - .ngpio = S5PC100_GPIO_G0_NR, - .label = "GPG0", - }, - }, { - .chip = { - .base = S5PC100_GPG1(0), - .ngpio = S5PC100_GPIO_G1_NR, - .label = "GPG1", - }, - }, { - .chip = { - .base = S5PC100_GPG2(0), - .ngpio = S5PC100_GPIO_G2_NR, - .label = "GPG2", - }, - }, { - .chip = { - .base = S5PC100_GPG3(0), - .ngpio = S5PC100_GPIO_G3_NR, - .label = "GPG3", - }, - }, { - .chip = { - .base = S5PC100_GPI(0), - .ngpio = S5PC100_GPIO_I_NR, - .label = "GPI", - }, - }, { - .chip = { - .base = S5PC100_GPJ0(0), - .ngpio = S5PC100_GPIO_J0_NR, - .label = "GPJ0", - }, - }, { - .chip = { - .base = S5PC100_GPJ1(0), - .ngpio = S5PC100_GPIO_J1_NR, - .label = "GPJ1", - }, - }, { - .chip = { - .base = S5PC100_GPJ2(0), - .ngpio = S5PC100_GPIO_J2_NR, - .label = "GPJ2", - }, - }, { - .chip = { - .base = S5PC100_GPJ3(0), - .ngpio = S5PC100_GPIO_J3_NR, - .label = "GPJ3", - }, - }, { - .chip = { - .base = S5PC100_GPJ4(0), - .ngpio = S5PC100_GPIO_J4_NR, - .label = "GPJ4", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = S5PC100_GPK0(0), - .ngpio = S5PC100_GPIO_K0_NR, - .label = "GPK0", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = S5PC100_GPK1(0), - .ngpio = S5PC100_GPIO_K1_NR, - .label = "GPK1", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = S5PC100_GPK2(0), - .ngpio = S5PC100_GPIO_K2_NR, - .label = "GPK2", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = S5PC100_GPK3(0), - .ngpio = S5PC100_GPIO_K3_NR, - .label = "GPK3", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = S5PC100_GPL0(0), - .ngpio = S5PC100_GPIO_L0_NR, - .label = "GPL0", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = S5PC100_GPL1(0), - .ngpio = S5PC100_GPIO_L1_NR, - .label = "GPL1", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = S5PC100_GPL2(0), - .ngpio = S5PC100_GPIO_L2_NR, - .label = "GPL2", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = S5PC100_GPL3(0), - .ngpio = S5PC100_GPIO_L3_NR, - .label = "GPL3", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = S5PC100_GPL4(0), - .ngpio = S5PC100_GPIO_L4_NR, - .label = "GPL4", - }, - }, { - .base = (S5P_VA_GPIO + 0xC00), - .config = &gpio_cfg_eint, - .irq_base = IRQ_EINT(0), - .chip = { - .base = S5PC100_GPH0(0), - .ngpio = S5PC100_GPIO_H0_NR, - .label = "GPH0", - .to_irq = samsung_gpiolib_to_irq, - }, - }, { - .base = (S5P_VA_GPIO + 0xC20), - .config = &gpio_cfg_eint, - .irq_base = IRQ_EINT(8), - .chip = { - .base = S5PC100_GPH1(0), - .ngpio = S5PC100_GPIO_H1_NR, - .label = "GPH1", - .to_irq = samsung_gpiolib_to_irq, - }, - }, { - .base = (S5P_VA_GPIO + 0xC40), - .config = &gpio_cfg_eint, - .irq_base = IRQ_EINT(16), - .chip = { - .base = S5PC100_GPH2(0), - .ngpio = S5PC100_GPIO_H2_NR, - .label = "GPH2", - .to_irq = samsung_gpiolib_to_irq, - }, - }, { - .base = (S5P_VA_GPIO + 0xC60), - .config = &gpio_cfg_eint, - .irq_base = IRQ_EINT(24), - .chip = { - .base = S5PC100_GPH3(0), - .ngpio = S5PC100_GPIO_H3_NR, - .label = "GPH3", - .to_irq = samsung_gpiolib_to_irq, - }, - }, -}; - -static __init int s5pc100_gpiolib_init(void) -{ - struct s3c_gpio_chip *chip = s5pc100_gpio_chips; - int nr_chips = ARRAY_SIZE(s5pc100_gpio_chips); - int gpioint_group = 0; - int i; - - for (i = 0; i < nr_chips; i++, chip++) { - if (chip->config == NULL) { - chip->config = &gpio_cfg; - chip->group = gpioint_group++; - } - if (chip->base == NULL) - chip->base = S5PC100_BANK_BASE(i); - } - - samsung_gpiolib_add_4bit_chips(s5pc100_gpio_chips, nr_chips); - s5p_register_gpioint_bank(IRQ_GPIOINT, 0, S5P_GPIOINT_GROUP_MAXNR); - - return 0; -} -core_initcall(s5pc100_gpiolib_init); diff --git a/drivers/gpio/gpio-s5pv210.c b/drivers/gpio/gpio-s5pv210.c deleted file mode 100644 index eb12f16..0000000 --- a/drivers/gpio/gpio-s5pv210.c +++ /dev/null @@ -1,287 +0,0 @@ -/* - * S5PV210 - GPIOlib support - * - * Copyright (c) 2010 Samsung Electronics Co., Ltd. - * http://www.samsung.com/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License version 2 as - * published by the Free Software Foundation. - */ - -#include <linux/kernel.h> -#include <linux/irq.h> -#include <linux/io.h> -#include <linux/gpio.h> -#include <plat/gpio-core.h> -#include <plat/gpio-cfg.h> -#include <plat/gpio-cfg-helpers.h> -#include <mach/map.h> - -static struct s3c_gpio_cfg gpio_cfg = { - .set_config = s3c_gpio_setcfg_s3c64xx_4bit, - .set_pull = s3c_gpio_setpull_updown, - .get_pull = s3c_gpio_getpull_updown, -}; - -static struct s3c_gpio_cfg gpio_cfg_noint = { - .set_config = s3c_gpio_setcfg_s3c64xx_4bit, - .set_pull = s3c_gpio_setpull_updown, - .get_pull = s3c_gpio_getpull_updown, -}; - -/* GPIO bank's base address given the index of the bank in the - * list of all gpio banks. - */ -#define S5PV210_BANK_BASE(bank_nr) (S5P_VA_GPIO + ((bank_nr) * 0x20)) - -/* - * Following are the gpio banks in v210. - * - * The 'config' member when left to NULL, is initialized to the default - * structure gpio_cfg in the init function below. - * - * The 'base' member is also initialized in the init function below. - * Note: The initialization of 'base' member of s3c_gpio_chip structure - * uses the above macro and depends on the banks being listed in order here. - */ -static struct s3c_gpio_chip s5pv210_gpio_4bit[] = { - { - .chip = { - .base = S5PV210_GPA0(0), - .ngpio = S5PV210_GPIO_A0_NR, - .label = "GPA0", - }, - }, { - .chip = { - .base = S5PV210_GPA1(0), - .ngpio = S5PV210_GPIO_A1_NR, - .label = "GPA1", - }, - }, { - .chip = { - .base = S5PV210_GPB(0), - .ngpio = S5PV210_GPIO_B_NR, - .label = "GPB", - }, - }, { - .chip = { - .base = S5PV210_GPC0(0), - .ngpio = S5PV210_GPIO_C0_NR, - .label = "GPC0", - }, - }, { - .chip = { - .base = S5PV210_GPC1(0), - .ngpio = S5PV210_GPIO_C1_NR, - .label = "GPC1", - }, - }, { - .chip = { - .base = S5PV210_GPD0(0), - .ngpio = S5PV210_GPIO_D0_NR, - .label = "GPD0", - }, - }, { - .chip = { - .base = S5PV210_GPD1(0), - .ngpio = S5PV210_GPIO_D1_NR, - .label = "GPD1", - }, - }, { - .chip = { - .base = S5PV210_GPE0(0), - .ngpio = S5PV210_GPIO_E0_NR, - .label = "GPE0", - }, - }, { - .chip = { - .base = S5PV210_GPE1(0), - .ngpio = S5PV210_GPIO_E1_NR, - .label = "GPE1", - }, - }, { - .chip = { - .base = S5PV210_GPF0(0), - .ngpio = S5PV210_GPIO_F0_NR, - .label = "GPF0", - }, - }, { - .chip = { - .base = S5PV210_GPF1(0), - .ngpio = S5PV210_GPIO_F1_NR, - .label = "GPF1", - }, - }, { - .chip = { - .base = S5PV210_GPF2(0), - .ngpio = S5PV210_GPIO_F2_NR, - .label = "GPF2", - }, - }, { - .chip = { - .base = S5PV210_GPF3(0), - .ngpio = S5PV210_GPIO_F3_NR, - .label = "GPF3", - }, - }, { - .chip = { - .base = S5PV210_GPG0(0), - .ngpio = S5PV210_GPIO_G0_NR, - .label = "GPG0", - }, - }, { - .chip = { - .base = S5PV210_GPG1(0), - .ngpio = S5PV210_GPIO_G1_NR, - .label = "GPG1", - }, - }, { - .chip = { - .base = S5PV210_GPG2(0), - .ngpio = S5PV210_GPIO_G2_NR, - .label = "GPG2", - }, - }, { - .chip = { - .base = S5PV210_GPG3(0), - .ngpio = S5PV210_GPIO_G3_NR, - .label = "GPG3", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = S5PV210_GPI(0), - .ngpio = S5PV210_GPIO_I_NR, - .label = "GPI", - }, - }, { - .chip = { - .base = S5PV210_GPJ0(0), - .ngpio = S5PV210_GPIO_J0_NR, - .label = "GPJ0", - }, - }, { - .chip = { - .base = S5PV210_GPJ1(0), - .ngpio = S5PV210_GPIO_J1_NR, - .label = "GPJ1", - }, - }, { - .chip = { - .base = S5PV210_GPJ2(0), - .ngpio = S5PV210_GPIO_J2_NR, - .label = "GPJ2", - }, - }, { - .chip = { - .base = S5PV210_GPJ3(0), - .ngpio = S5PV210_GPIO_J3_NR, - .label = "GPJ3", - }, - }, { - .chip = { - .base = S5PV210_GPJ4(0), - .ngpio = S5PV210_GPIO_J4_NR, - .label = "GPJ4", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = S5PV210_MP01(0), - .ngpio = S5PV210_GPIO_MP01_NR, - .label = "MP01", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = S5PV210_MP02(0), - .ngpio = S5PV210_GPIO_MP02_NR, - .label = "MP02", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = S5PV210_MP03(0), - .ngpio = S5PV210_GPIO_MP03_NR, - .label = "MP03", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = S5PV210_MP04(0), - .ngpio = S5PV210_GPIO_MP04_NR, - .label = "MP04", - }, - }, { - .config = &gpio_cfg_noint, - .chip = { - .base = S5PV210_MP05(0), - .ngpio = S5PV210_GPIO_MP05_NR, - .label = "MP05", - }, - }, { - .base = (S5P_VA_GPIO + 0xC00), - .config = &gpio_cfg_noint, - .irq_base = IRQ_EINT(0), - .chip = { - .base = S5PV210_GPH0(0), - .ngpio = S5PV210_GPIO_H0_NR, - .label = "GPH0", - .to_irq = samsung_gpiolib_to_irq, - }, - }, { - .base = (S5P_VA_GPIO + 0xC20), - .config = &gpio_cfg_noint, - .irq_base = IRQ_EINT(8), - .chip = { - .base = S5PV210_GPH1(0), - .ngpio = S5PV210_GPIO_H1_NR, - .label = "GPH1", - .to_irq = samsung_gpiolib_to_irq, - }, - }, { - .base = (S5P_VA_GPIO + 0xC40), - .config = &gpio_cfg_noint, - .irq_base = IRQ_EINT(16), - .chip = { - .base = S5PV210_GPH2(0), - .ngpio = S5PV210_GPIO_H2_NR, - .label = "GPH2", - .to_irq = samsung_gpiolib_to_irq, - }, - }, { - .base = (S5P_VA_GPIO + 0xC60), - .config = &gpio_cfg_noint, - .irq_base = IRQ_EINT(24), - .chip = { - .base = S5PV210_GPH3(0), - .ngpio = S5PV210_GPIO_H3_NR, - .label = "GPH3", - .to_irq = samsung_gpiolib_to_irq, - }, - }, -}; - -static __init int s5pv210_gpiolib_init(void) -{ - struct s3c_gpio_chip *chip = s5pv210_gpio_4bit; - int nr_chips = ARRAY_SIZE(s5pv210_gpio_4bit); - int gpioint_group = 0; - int i = 0; - - for (i = 0; i < nr_chips; i++, chip++) { - if (chip->config == NULL) { - chip->config = &gpio_cfg; - chip->group = gpioint_group++; - } - if (chip->base == NULL) - chip->base = S5PV210_BANK_BASE(i); - } - - samsung_gpiolib_add_4bit_chips(s5pv210_gpio_4bit, nr_chips); - s5p_register_gpioint_bank(IRQ_GPIOINT, 0, S5P_GPIOINT_GROUP_MAXNR); - - return 0; -} -core_initcall(s5pv210_gpiolib_init); diff --git a/drivers/gpio/gpio-samsung.c b/drivers/gpio/gpio-samsung.c new file mode 100644 index 0000000..b6be77a --- /dev/null +++ b/drivers/gpio/gpio-samsung.c @@ -0,0 +1,2688 @@ +/* + * Copyright (c) 2009-2011 Samsung Electronics Co., Ltd. + * http://www.samsung.com/ + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * SAMSUNG - GPIOlib support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/irq.h> +#include <linux/io.h> +#include <linux/gpio.h> +#include <linux/init.h> +#include <linux/spinlock.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/sysdev.h> +#include <linux/ioport.h> + +#include <asm/irq.h> + +#include <mach/hardware.h> +#include <mach/map.h> +#include <mach/regs-clock.h> +#include <mach/regs-gpio.h> + +#include <plat/cpu.h> +#include <plat/gpio-core.h> +#include <plat/gpio-cfg.h> +#include <plat/gpio-cfg-helpers.h> +#include <plat/gpio-fns.h> +#include <plat/pm.h> + +#ifndef DEBUG_GPIO +#define gpio_dbg(x...) do { } while (0) +#else +#define gpio_dbg(x...) printk(KERN_DEBUG x) +#endif + +int samsung_gpio_setpull_updown(struct samsung_gpio_chip *chip, + unsigned int off, samsung_gpio_pull_t pull) +{ + void __iomem *reg = chip->base + 0x08; + int shift = off * 2; + u32 pup; + + pup = __raw_readl(reg); + pup &= ~(3 << shift); + pup |= pull << shift; + __raw_writel(pup, reg); + + return 0; +} + +samsung_gpio_pull_t samsung_gpio_getpull_updown(struct samsung_gpio_chip *chip, + unsigned int off) +{ + void __iomem *reg = chip->base + 0x08; + int shift = off * 2; + u32 pup = __raw_readl(reg); + + pup >>= shift; + pup &= 0x3; + + return (__force samsung_gpio_pull_t)pup; +} + +int s3c2443_gpio_setpull(struct samsung_gpio_chip *chip, + unsigned int off, samsung_gpio_pull_t pull) +{ + switch (pull) { + case S3C_GPIO_PULL_NONE: + pull = 0x01; + break; + case S3C_GPIO_PULL_UP: + pull = 0x00; + break; + case S3C_GPIO_PULL_DOWN: + pull = 0x02; + break; + } + return samsung_gpio_setpull_updown(chip, off, pull); +} + +samsung_gpio_pull_t s3c2443_gpio_getpull(struct samsung_gpio_chip *chip, + unsigned int off) +{ + samsung_gpio_pull_t pull; + + pull = samsung_gpio_getpull_updown(chip, off); + + switch (pull) { + case 0x00: + pull = S3C_GPIO_PULL_UP; + break; + case 0x01: + case 0x03: + pull = S3C_GPIO_PULL_NONE; + break; + case 0x02: + pull = S3C_GPIO_PULL_DOWN; + break; + } + + return pull; +} + +static int s3c24xx_gpio_setpull_1(struct samsung_gpio_chip *chip, + unsigned int off, samsung_gpio_pull_t pull, + samsung_gpio_pull_t updown) +{ + void __iomem *reg = chip->base + 0x08; + u32 pup = __raw_readl(reg); + + if (pull == updown) + pup &= ~(1 << off); + else if (pull == S3C_GPIO_PULL_NONE) + pup |= (1 << off); + else + return -EINVAL; + + __raw_writel(pup, reg); + return 0; +} + +static samsung_gpio_pull_t s3c24xx_gpio_getpull_1(struct samsung_gpio_chip *chip, + unsigned int off, + samsung_gpio_pull_t updown) +{ + void __iomem *reg = chip->base + 0x08; + u32 pup = __raw_readl(reg); + + pup &= (1 << off); + return pup ? S3C_GPIO_PULL_NONE : updown; +} + +samsung_gpio_pull_t s3c24xx_gpio_getpull_1up(struct samsung_gpio_chip *chip, + unsigned int off) +{ + return s3c24xx_gpio_getpull_1(chip, off, S3C_GPIO_PULL_UP); +} + +int s3c24xx_gpio_setpull_1up(struct samsung_gpio_chip *chip, + unsigned int off, samsung_gpio_pull_t pull) +{ + return s3c24xx_gpio_setpull_1(chip, off, pull, S3C_GPIO_PULL_UP); +} + +samsung_gpio_pull_t s3c24xx_gpio_getpull_1down(struct samsung_gpio_chip *chip, + unsigned int off) +{ + return s3c24xx_gpio_getpull_1(chip, off, S3C_GPIO_PULL_DOWN); +} + +int s3c24xx_gpio_setpull_1down(struct samsung_gpio_chip *chip, + unsigned int off, samsung_gpio_pull_t pull) +{ + return s3c24xx_gpio_setpull_1(chip, off, pull, S3C_GPIO_PULL_DOWN); +} + +static int exynos4_gpio_setpull(struct samsung_gpio_chip *chip, + unsigned int off, samsung_gpio_pull_t pull) +{ + if (pull == S3C_GPIO_PULL_UP) + pull = 3; + + return samsung_gpio_setpull_updown(chip, off, pull); +} + +static samsung_gpio_pull_t exynos4_gpio_getpull(struct samsung_gpio_chip *chip, + unsigned int off) +{ + samsung_gpio_pull_t pull; + + pull = samsung_gpio_getpull_updown(chip, off); + + if (pull == 3) + pull = S3C_GPIO_PULL_UP; + + return pull; +} + +/* + * samsung_gpio_setcfg_2bit - Samsung 2bit style GPIO configuration. + * @chip: The gpio chip that is being configured. + * @off: The offset for the GPIO being configured. + * @cfg: The configuration value to set. + * + * This helper deal with the GPIO cases where the control register + * has two bits of configuration per gpio, which have the following + * functions: + * 00 = input + * 01 = output + * 1x = special function + */ + +static int samsung_gpio_setcfg_2bit(struct samsung_gpio_chip *chip, + unsigned int off, unsigned int cfg) +{ + void __iomem *reg = chip->base; + unsigned int shift = off * 2; + u32 con; + + if (samsung_gpio_is_cfg_special(cfg)) { + cfg &= 0xf; + if (cfg > 3) + return -EINVAL; + + cfg <<= shift; + } + + con = __raw_readl(reg); + con &= ~(0x3 << shift); + con |= cfg; + __raw_writel(con, reg); + + return 0; +} + +/* + * samsung_gpio_getcfg_2bit - Samsung 2bit style GPIO configuration read. + * @chip: The gpio chip that is being configured. + * @off: The offset for the GPIO being configured. + * + * The reverse of samsung_gpio_setcfg_2bit(). Will return a value whicg + * could be directly passed back to samsung_gpio_setcfg_2bit(), from the + * S3C_GPIO_SPECIAL() macro. + */ + +static unsigned int samsung_gpio_getcfg_2bit(struct samsung_gpio_chip *chip, + unsigned int off) +{ + u32 con; + + con = __raw_readl(chip->base); + con >>= off * 2; + con &= 3; + + /* this conversion works for IN and OUT as well as special mode */ + return S3C_GPIO_SPECIAL(con); +} + +/* + * samsung_gpio_setcfg_4bit - Samsung 4bit single register GPIO config. + * @chip: The gpio chip that is being configured. + * @off: The offset for the GPIO being configured. + * @cfg: The configuration value to set. + * + * This helper deal with the GPIO cases where the control register has 4 bits + * of control per GPIO, generally in the form of: + * 0000 = Input + * 0001 = Output + * others = Special functions (dependent on bank) + * + * Note, since the code to deal with the case where there are two control + * registers instead of one, we do not have a separate set of functions for + * each case. + */ + +static int samsung_gpio_setcfg_4bit(struct samsung_gpio_chip *chip, + unsigned int off, unsigned int cfg) +{ + void __iomem *reg = chip->base; + unsigned int shift = (off & 7) * 4; + u32 con; + + if (off < 8 && chip->chip.ngpio > 8) + reg -= 4; + + if (samsung_gpio_is_cfg_special(cfg)) { + cfg &= 0xf; + cfg <<= shift; + } + + con = __raw_readl(reg); + con &= ~(0xf << shift); + con |= cfg; + __raw_writel(con, reg); + + return 0; +} + +/* + * samsung_gpio_getcfg_4bit - Samsung 4bit single register GPIO config read. + * @chip: The gpio chip that is being configured. + * @off: The offset for the GPIO being configured. + * + * The reverse of samsung_gpio_setcfg_4bit(), turning a gpio configuration + * register setting into a value the software can use, such as could be passed + * to samsung_gpio_setcfg_4bit(). + * + * @sa samsung_gpio_getcfg_2bit + */ + +static unsigned samsung_gpio_getcfg_4bit(struct samsung_gpio_chip *chip, + unsigned int off) +{ + void __iomem *reg = chip->base; + unsigned int shift = (off & 7) * 4; + u32 con; + + if (off < 8 && chip->chip.ngpio > 8) + reg -= 4; + + con = __raw_readl(reg); + con >>= shift; + con &= 0xf; + + /* this conversion works for IN and OUT as well as special mode */ + return S3C_GPIO_SPECIAL(con); +} + +/* + * s3c24xx_gpio_setcfg_abank - S3C24XX style GPIO configuration (Bank A) + * @chip: The gpio chip that is being configured. + * @off: The offset for the GPIO being configured. + * @cfg: The configuration value to set. + * + * This helper deal with the GPIO cases where the control register + * has one bit of configuration for the gpio, where setting the bit + * means the pin is in special function mode and unset means output. + */ + +static int s3c24xx_gpio_setcfg_abank(struct samsung_gpio_chip *chip, + unsigned int off, unsigned int cfg) +{ + void __iomem *reg = chip->base; + unsigned int shift = off; + u32 con; + + if (samsung_gpio_is_cfg_special(cfg)) { + cfg &= 0xf; + + /* Map output to 0, and SFN2 to 1 */ + cfg -= 1; + if (cfg > 1) + return -EINVAL; + + cfg <<= shift; + } + + con = __raw_readl(reg); + con &= ~(0x1 << shift); + con |= cfg; + __raw_writel(con, reg); + + return 0; +} + +/* + * s3c24xx_gpio_getcfg_abank - S3C24XX style GPIO configuration read (Bank A) + * @chip: The gpio chip that is being configured. + * @off: The offset for the GPIO being configured. + * + * The reverse of s3c24xx_gpio_setcfg_abank() turning an GPIO into a usable + * GPIO configuration value. + * + * @sa samsung_gpio_getcfg_2bit + * @sa samsung_gpio_getcfg_4bit + */ + +static unsigned s3c24xx_gpio_getcfg_abank(struct samsung_gpio_chip *chip, + unsigned int off) +{ + u32 con; + + con = __raw_readl(chip->base); + con >>= off; + con &= 1; + con++; + + return S3C_GPIO_SFN(con); +} + +static int s5p64x0_gpio_setcfg_rbank(struct samsung_gpio_chip *chip, + unsigned int off, unsigned int cfg) +{ + void __iomem *reg = chip->base; + unsigned int shift; + u32 con; + + switch (off) { + case 0: + case 1: + case 2: + case 3: + case 4: + case 5: + shift = (off & 7) * 4; + reg -= 4; + break; + case 6: + shift = ((off + 1) & 7) * 4; + reg -= 4; + default: + shift = ((off + 1) & 7) * 4; + break; + } + + if (samsung_gpio_is_cfg_special(cfg)) { + cfg &= 0xf; + cfg <<= shift; + } + + con = __raw_readl(reg); + con &= ~(0xf << shift); + con |= cfg; + __raw_writel(con, reg); + + return 0; +} + +static void __init samsung_gpiolib_set_cfg(struct samsung_gpio_cfg *chipcfg, + int nr_chips) +{ + for (; nr_chips > 0; nr_chips--, chipcfg++) { + if (!chipcfg->set_config) + chipcfg->set_config = samsung_gpio_setcfg_4bit; + if (!chipcfg->get_config) + chipcfg->get_config = samsung_gpio_getcfg_4bit; + if (!chipcfg->set_pull) + chipcfg->set_pull = samsung_gpio_setpull_updown; + if (!chipcfg->get_pull) + chipcfg->get_pull = samsung_gpio_getpull_updown; + } +} + +struct samsung_gpio_cfg s3c24xx_gpiocfg_default = { + .set_config = samsung_gpio_setcfg_2bit, + .get_config = samsung_gpio_getcfg_2bit, +}; + +static struct samsung_gpio_cfg s3c24xx_gpiocfg_banka = { + .set_config = s3c24xx_gpio_setcfg_abank, + .get_config = s3c24xx_gpio_getcfg_abank, +}; + +static struct samsung_gpio_cfg exynos4_gpio_cfg = { + .set_pull = exynos4_gpio_setpull, + .get_pull = exynos4_gpio_getpull, + .set_config = samsung_gpio_setcfg_4bit, + .get_config = samsung_gpio_getcfg_4bit, +}; + +static struct samsung_gpio_cfg s5p64x0_gpio_cfg_rbank = { + .cfg_eint = 0x3, + .set_config = s5p64x0_gpio_setcfg_rbank, + .get_config = samsung_gpio_getcfg_4bit, + .set_pull = samsung_gpio_setpull_updown, + .get_pull = samsung_gpio_getpull_updown, +}; + +static struct samsung_gpio_cfg samsung_gpio_cfgs[] = { + { + .cfg_eint = 0x0, + }, { + .cfg_eint = 0x3, + }, { + .cfg_eint = 0x7, + }, { + .cfg_eint = 0xF, + }, { + .cfg_eint = 0x0, + .set_config = samsung_gpio_setcfg_2bit, + .get_config = samsung_gpio_getcfg_2bit, + }, { + .cfg_eint = 0x2, + .set_config = samsung_gpio_setcfg_2bit, + .get_config = samsung_gpio_getcfg_2bit, + }, { + .cfg_eint = 0x3, + .set_config = samsung_gpio_setcfg_2bit, + .get_config = samsung_gpio_getcfg_2bit, + }, { + .set_config = samsung_gpio_setcfg_2bit, + .get_config = samsung_gpio_getcfg_2bit, + }, +}; + +/* + * Default routines for controlling GPIO, based on the original S3C24XX + * GPIO functions which deal with the case where each gpio bank of the + * chip is as following: + * + * base + 0x00: Control register, 2 bits per gpio + * gpio n: 2 bits starting at (2*n) + * 00 = input, 01 = output, others mean special-function + * base + 0x04: Data register, 1 bit per gpio + * bit n: data bit n +*/ + +static int samsung_gpiolib_2bit_input(struct gpio_chip *chip, unsigned offset) +{ + struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip); + void __iomem *base = ourchip->base; + unsigned long flags; + unsigned long con; + + samsung_gpio_lock(ourchip, flags); + + con = __raw_readl(base + 0x00); + con &= ~(3 << (offset * 2)); + + __raw_writel(con, base + 0x00); + + samsung_gpio_unlock(ourchip, flags); + return 0; +} + +static int samsung_gpiolib_2bit_output(struct gpio_chip *chip, + unsigned offset, int value) +{ + struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip); + void __iomem *base = ourchip->base; + unsigned long flags; + unsigned long dat; + unsigned long con; + + samsung_gpio_lock(ourchip, flags); + + dat = __raw_readl(base + 0x04); + dat &= ~(1 << offset); + if (value) + dat |= 1 << offset; + __raw_writel(dat, base + 0x04); + + con = __raw_readl(base + 0x00); + con &= ~(3 << (offset * 2)); + con |= 1 << (offset * 2); + + __raw_writel(con, base + 0x00); + __raw_writel(dat, base + 0x04); + + samsung_gpio_unlock(ourchip, flags); + return 0; +} + +/* + * The samsung_gpiolib_4bit routines are to control the gpio banks where + * the gpio configuration register (GPxCON) has 4 bits per GPIO, as the + * following example: + * + * base + 0x00: Control register, 4 bits per gpio + * gpio n: 4 bits starting at (4*n) + * 0000 = input, 0001 = output, others mean special-function + * base + 0x04: Data register, 1 bit per gpio + * bit n: data bit n + * + * Note, since the data register is one bit per gpio and is at base + 0x4 + * we can use samsung_gpiolib_get and samsung_gpiolib_set to change the + * state of the output. + */ + +static int samsung_gpiolib_4bit_input(struct gpio_chip *chip, + unsigned int offset) +{ + struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip); + void __iomem *base = ourchip->base; + unsigned long con; + + con = __raw_readl(base + GPIOCON_OFF); + con &= ~(0xf << con_4bit_shift(offset)); + __raw_writel(con, base + GPIOCON_OFF); + + gpio_dbg("%s: %p: CON now %08lx\n", __func__, base, con); + + return 0; +} + +static int samsung_gpiolib_4bit_output(struct gpio_chip *chip, + unsigned int offset, int value) +{ + struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip); + void __iomem *base = ourchip->base; + unsigned long con; + unsigned long dat; + + con = __raw_readl(base + GPIOCON_OFF); + con &= ~(0xf << con_4bit_shift(offset)); + con |= 0x1 << con_4bit_shift(offset); + + dat = __raw_readl(base + GPIODAT_OFF); + + if (value) + dat |= 1 << offset; + else + dat &= ~(1 << offset); + + __raw_writel(dat, base + GPIODAT_OFF); + __raw_writel(con, base + GPIOCON_OFF); + __raw_writel(dat, base + GPIODAT_OFF); + + gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat); + + return 0; +} + +/* + * The next set of routines are for the case where the GPIO configuration + * registers are 4 bits per GPIO but there is more than one register (the + * bank has more than 8 GPIOs. + * + * This case is the similar to the 4 bit case, but the registers are as + * follows: + * + * base + 0x00: Control register, 4 bits per gpio (lower 8 GPIOs) + * gpio n: 4 bits starting at (4*n) + * 0000 = input, 0001 = output, others mean special-function + * base + 0x04: Control register, 4 bits per gpio (up to 8 additions GPIOs) + * gpio n: 4 bits starting at (4*n) + * 0000 = input, 0001 = output, others mean special-function + * base + 0x08: Data register, 1 bit per gpio + * bit n: data bit n + * + * To allow us to use the samsung_gpiolib_get and samsung_gpiolib_set + * routines we store the 'base + 0x4' address so that these routines see + * the data register at ourchip->base + 0x04. + */ + +static int samsung_gpiolib_4bit2_input(struct gpio_chip *chip, + unsigned int offset) +{ + struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip); + void __iomem *base = ourchip->base; + void __iomem *regcon = base; + unsigned long con; + + if (offset > 7) + offset -= 8; + else + regcon -= 4; + + con = __raw_readl(regcon); + con &= ~(0xf << con_4bit_shift(offset)); + __raw_writel(con, regcon); + + gpio_dbg("%s: %p: CON %08lx\n", __func__, base, con); + + return 0; +} + +static int samsung_gpiolib_4bit2_output(struct gpio_chip *chip, + unsigned int offset, int value) +{ + struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip); + void __iomem *base = ourchip->base; + void __iomem *regcon = base; + unsigned long con; + unsigned long dat; + unsigned con_offset = offset; + + if (con_offset > 7) + con_offset -= 8; + else + regcon -= 4; + + con = __raw_readl(regcon); + con &= ~(0xf << con_4bit_shift(con_offset)); + con |= 0x1 << con_4bit_shift(con_offset); + + dat = __raw_readl(base + GPIODAT_OFF); + + if (value) + dat |= 1 << offset; + else + dat &= ~(1 << offset); + + __raw_writel(dat, base + GPIODAT_OFF); + __raw_writel(con, regcon); + __raw_writel(dat, base + GPIODAT_OFF); + + gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat); + + return 0; +} + +/* The next set of routines are for the case of s3c24xx bank a */ + +static int s3c24xx_gpiolib_banka_input(struct gpio_chip *chip, unsigned offset) +{ + return -EINVAL; +} + +static int s3c24xx_gpiolib_banka_output(struct gpio_chip *chip, + unsigned offset, int value) +{ + struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip); + void __iomem *base = ourchip->base; + unsigned long flags; + unsigned long dat; + unsigned long con; + + local_irq_save(flags); + + con = __raw_readl(base + 0x00); + dat = __raw_readl(base + 0x04); + + dat &= ~(1 << offset); + if (value) + dat |= 1 << offset; + + __raw_writel(dat, base + 0x04); + + con &= ~(1 << offset); + + __raw_writel(con, base + 0x00); + __raw_writel(dat, base + 0x04); + + local_irq_restore(flags); + return 0; +} + +/* The next set of routines are for the case of s5p64x0 bank r */ + +static int s5p64x0_gpiolib_rbank_input(struct gpio_chip *chip, + unsigned int offset) +{ + struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip); + void __iomem *base = ourchip->base; + void __iomem *regcon = base; + unsigned long con; + unsigned long flags; + + switch (offset) { + case 6: + offset += 1; + case 0: + case 1: + case 2: + case 3: + case 4: + case 5: + regcon -= 4; + break; + default: + offset -= 7; + break; + } + + samsung_gpio_lock(ourchip, flags); + + con = __raw_readl(regcon); + con &= ~(0xf << con_4bit_shift(offset)); + __raw_writel(con, regcon); + + samsung_gpio_unlock(ourchip, flags); + + return 0; +} + +static int s5p64x0_gpiolib_rbank_output(struct gpio_chip *chip, + unsigned int offset, int value) +{ + struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip); + void __iomem *base = ourchip->base; + void __iomem *regcon = base; + unsigned long con; + unsigned long dat; + unsigned long flags; + unsigned con_offset = offset; + + switch (con_offset) { + case 6: + con_offset += 1; + case 0: + case 1: + case 2: + case 3: + case 4: + case 5: + regcon -= 4; + break; + default: + con_offset -= 7; + break; + } + + samsung_gpio_lock(ourchip, flags); + + con = __raw_readl(regcon); + con &= ~(0xf << con_4bit_shift(con_offset)); + con |= 0x1 << con_4bit_shift(con_offset); + + dat = __raw_readl(base + GPIODAT_OFF); + if (value) + dat |= 1 << offset; + else + dat &= ~(1 << offset); + + __raw_writel(con, regcon); + __raw_writel(dat, base + GPIODAT_OFF); + + samsung_gpio_unlock(ourchip, flags); + + return 0; +} + +static void samsung_gpiolib_set(struct gpio_chip *chip, + unsigned offset, int value) +{ + struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip); + void __iomem *base = ourchip->base; + unsigned long flags; + unsigned long dat; + + samsung_gpio_lock(ourchip, flags); + + dat = __raw_readl(base + 0x04); + dat &= ~(1 << offset); + if (value) + dat |= 1 << offset; + __raw_writel(dat, base + 0x04); + + samsung_gpio_unlock(ourchip, flags); +} + +static int samsung_gpiolib_get(struct gpio_chip *chip, unsigned offset) +{ + struct samsung_gpio_chip *ourchip = to_samsung_gpio(chip); + unsigned long val; + + val = __raw_readl(ourchip->base + 0x04); + val >>= offset; + val &= 1; + + return val; +} + +/* + * CONFIG_S3C_GPIO_TRACK enables the tracking of the s3c specific gpios + * for use with the configuration calls, and other parts of the s3c gpiolib + * support code. + * + * Not all s3c support code will need this, as some configurations of cpu + * may only support one or two different configuration options and have an + * easy gpio to samsung_gpio_chip mapping function. If this is the case, then + * the machine support file should provide its own samsung_gpiolib_getchip() + * and any other necessary functions. + */ + +#ifdef CONFIG_S3C_GPIO_TRACK +struct samsung_gpio_chip *s3c_gpios[S3C_GPIO_END]; + +static __init void s3c_gpiolib_track(struct samsung_gpio_chip *chip) +{ + unsigned int gpn; + int i; + + gpn = chip->chip.base; + for (i = 0; i < chip->chip.ngpio; i++, gpn++) { + BUG_ON(gpn >= ARRAY_SIZE(s3c_gpios)); + s3c_gpios[gpn] = chip; + } +} +#endif /* CONFIG_S3C_GPIO_TRACK */ + +/* + * samsung_gpiolib_add() - add the Samsung gpio_chip. + * @chip: The chip to register + * + * This is a wrapper to gpiochip_add() that takes our specific gpio chip + * information and makes the necessary alterations for the platform and + * notes the information for use with the configuration systems and any + * other parts of the system. + */ + +static void __init samsung_gpiolib_add(struct samsung_gpio_chip *chip) +{ + struct gpio_chip *gc = &chip->chip; + int ret; + + BUG_ON(!chip->base); + BUG_ON(!gc->label); + BUG_ON(!gc->ngpio); + + spin_lock_init(&chip->lock); + + if (!gc->direction_input) + gc->direction_input = samsung_gpiolib_2bit_input; + if (!gc->direction_output) + gc->direction_output = samsung_gpiolib_2bit_output; + if (!gc->set) + gc->set = samsung_gpiolib_set; + if (!gc->get) + gc->get = samsung_gpiolib_get; + +#ifdef CONFIG_PM + if (chip->pm != NULL) { + if (!chip->pm->save || !chip->pm->resume) + printk(KERN_ERR "gpio: %s has missing PM functions\n", + gc->label); + } else + printk(KERN_ERR "gpio: %s has no PM function\n", gc->label); +#endif + + /* gpiochip_add() prints own failure message on error. */ + ret = gpiochip_add(gc); + if (ret >= 0) + s3c_gpiolib_track(chip); +} + +static void __init s3c24xx_gpiolib_add_chips(struct samsung_gpio_chip *chip, + int nr_chips, void __iomem *base) +{ + int i; + struct gpio_chip *gc = &chip->chip; + + for (i = 0 ; i < nr_chips; i++, chip++) { + if (!chip->config) + chip->config = &s3c24xx_gpiocfg_default; + if (!chip->pm) + chip->pm = __gpio_pm(&samsung_gpio_pm_2bit); + if ((base != NULL) && (chip->base == NULL)) + chip->base = base + ((i) * 0x10); + + if (!gc->direction_input) + gc->direction_input = samsung_gpiolib_2bit_input; + if (!gc->direction_output) + gc->direction_output = samsung_gpiolib_2bit_output; + + samsung_gpiolib_add(chip); + } +} + +static void __init samsung_gpiolib_add_2bit_chips(struct samsung_gpio_chip *chip, + int nr_chips, void __iomem *base, + unsigned int offset) +{ + int i; + + for (i = 0 ; i < nr_chips; i++, chip++) { + chip->chip.direction_input = samsung_gpiolib_2bit_input; + chip->chip.direction_output = samsung_gpiolib_2bit_output; + + if (!chip->config) + chip->config = &samsung_gpio_cfgs[7]; + if (!chip->pm) + chip->pm = __gpio_pm(&samsung_gpio_pm_2bit); + if ((base != NULL) && (chip->base == NULL)) + chip->base = base + ((i) * offset); + + samsung_gpiolib_add(chip); + } +} + +/* + * samsung_gpiolib_add_4bit_chips - 4bit single register GPIO config. + * @chip: The gpio chip that is being configured. + * @nr_chips: The no of chips (gpio ports) for the GPIO being configured. + * + * This helper deal with the GPIO cases where the control register has 4 bits + * of control per GPIO, generally in the form of: + * 0000 = Input + * 0001 = Output + * others = Special functions (dependent on bank) + * + * Note, since the code to deal with the case where there are two control + * registers instead of one, we do not have a separate set of function + * (samsung_gpiolib_add_4bit2_chips)for each case. + */ + +static void __init samsung_gpiolib_add_4bit_chips(struct samsung_gpio_chip *chip, + int nr_chips, void __iomem *base) +{ + int i; + + for (i = 0 ; i < nr_chips; i++, chip++) { + chip->chip.direction_input = samsung_gpiolib_4bit_input; + chip->chip.direction_output = samsung_gpiolib_4bit_output; + + if (!chip->config) + chip->config = &samsung_gpio_cfgs[2]; + if (!chip->pm) + chip->pm = __gpio_pm(&samsung_gpio_pm_4bit); + if ((base != NULL) && (chip->base == NULL)) + chip->base = base + ((i) * 0x20); + + samsung_gpiolib_add(chip); + } +} + +static void __init samsung_gpiolib_add_4bit2_chips(struct samsung_gpio_chip *chip, + int nr_chips) +{ + for (; nr_chips > 0; nr_chips--, chip++) { + chip->chip.direction_input = samsung_gpiolib_4bit2_input; + chip->chip.direction_output = samsung_gpiolib_4bit2_output; + + if (!chip->config) + chip->config = &samsung_gpio_cfgs[2]; + if (!chip->pm) + chip->pm = __gpio_pm(&samsung_gpio_pm_4bit); + + samsung_gpiolib_add(chip); + } +} + +static void __init s5p64x0_gpiolib_add_rbank(struct samsung_gpio_chip *chip, + int nr_chips) +{ + for (; nr_chips > 0; nr_chips--, chip++) { + chip->chip.direction_input = s5p64x0_gpiolib_rbank_input; + chip->chip.direction_output = s5p64x0_gpiolib_rbank_output; + + if (!chip->pm) + chip->pm = __gpio_pm(&samsung_gpio_pm_4bit); + + samsung_gpiolib_add(chip); + } +} + +int samsung_gpiolib_to_irq(struct gpio_chip *chip, unsigned int offset) +{ + struct samsung_gpio_chip *samsung_chip = container_of(chip, struct samsung_gpio_chip, chip); + + return samsung_chip->irq_base + offset; +} + +#ifdef CONFIG_PLAT_S3C24XX +static int s3c24xx_gpiolib_fbank_to_irq(struct gpio_chip *chip, unsigned offset) +{ + if (offset < 4) + return IRQ_EINT0 + offset; + + if (offset < 8) + return IRQ_EINT4 + offset - 4; + + return -EINVAL; +} +#endif + +#ifdef CONFIG_PLAT_S3C64XX +static int s3c64xx_gpiolib_mbank_to_irq(struct gpio_chip *chip, unsigned pin) +{ + return pin < 5 ? IRQ_EINT(23) + pin : -ENXIO; +} + +static int s3c64xx_gpiolib_lbank_to_irq(struct gpio_chip *chip, unsigned pin) +{ + return pin >= 8 ? IRQ_EINT(16) + pin - 8 : -ENXIO; +} +#endif + +struct samsung_gpio_chip s3c24xx_gpios[] = { +#ifdef CONFIG_PLAT_S3C24XX + { + .config = &s3c24xx_gpiocfg_banka, + .chip = { + .base = S3C2410_GPA(0), + .owner = THIS_MODULE, + .label = "GPIOA", + .ngpio = 24, + .direction_input = s3c24xx_gpiolib_banka_input, + .direction_output = s3c24xx_gpiolib_banka_output, + }, + }, { + .chip = { + .base = S3C2410_GPB(0), + .owner = THIS_MODULE, + .label = "GPIOB", + .ngpio = 16, + }, + }, { + .chip = { + .base = S3C2410_GPC(0), + .owner = THIS_MODULE, + .label = "GPIOC", + .ngpio = 16, + }, + }, { + .chip = { + .base = S3C2410_GPD(0), + .owner = THIS_MODULE, + .label = "GPIOD", + .ngpio = 16, + }, + }, { + .chip = { + .base = S3C2410_GPE(0), + .label = "GPIOE", + .owner = THIS_MODULE, + .ngpio = 16, + }, + }, { + .chip = { + .base = S3C2410_GPF(0), + .owner = THIS_MODULE, + .label = "GPIOF", + .ngpio = 8, + .to_irq = s3c24xx_gpiolib_fbank_to_irq, + }, + }, { + .irq_base = IRQ_EINT8, + .chip = { + .base = S3C2410_GPG(0), + .owner = THIS_MODULE, + .label = "GPIOG", + .ngpio = 16, + .to_irq = samsung_gpiolib_to_irq, + }, + }, { + .chip = { + .base = S3C2410_GPH(0), + .owner = THIS_MODULE, + .label = "GPIOH", + .ngpio = 11, + }, + }, + /* GPIOS for the S3C2443 and later devices. */ + { + .base = S3C2440_GPJCON, + .chip = { + .base = S3C2410_GPJ(0), + .owner = THIS_MODULE, + .label = "GPIOJ", + .ngpio = 16, + }, + }, { + .base = S3C2443_GPKCON, + .chip = { + .base = S3C2410_GPK(0), + .owner = THIS_MODULE, + .label = "GPIOK", + .ngpio = 16, + }, + }, { + .base = S3C2443_GPLCON, + .chip = { + .base = S3C2410_GPL(0), + .owner = THIS_MODULE, + .label = "GPIOL", + .ngpio = 15, + }, + }, { + .base = S3C2443_GPMCON, + .chip = { + .base = S3C2410_GPM(0), + .owner = THIS_MODULE, + .label = "GPIOM", + .ngpio = 2, + }, + }, +#endif +}; + +/* + * GPIO bank summary: + * + * Bank GPIOs Style SlpCon ExtInt Group + * A 8 4Bit Yes 1 + * B 7 4Bit Yes 1 + * C 8 4Bit Yes 2 + * D 5 4Bit Yes 3 + * E 5 4Bit Yes None + * F 16 2Bit Yes 4 [1] + * G 7 4Bit Yes 5 + * H 10 4Bit[2] Yes 6 + * I 16 2Bit Yes None + * J 12 2Bit Yes None + * K 16 4Bit[2] No None + * L 15 4Bit[2] No None + * M 6 4Bit No IRQ_EINT + * N 16 2Bit No IRQ_EINT + * O 16 2Bit Yes 7 + * P 15 2Bit Yes 8 + * Q 9 2Bit Yes 9 + * + * [1] BANKF pins 14,15 do not form part of the external interrupt sources + * [2] BANK has two control registers, GPxCON0 and GPxCON1 + */ + +static struct samsung_gpio_chip s3c64xx_gpios_4bit[] = { +#ifdef CONFIG_PLAT_S3C64XX + { + .chip = { + .base = S3C64XX_GPA(0), + .ngpio = S3C64XX_GPIO_A_NR, + .label = "GPA", + }, + }, { + .chip = { + .base = S3C64XX_GPB(0), + .ngpio = S3C64XX_GPIO_B_NR, + .label = "GPB", + }, + }, { + .chip = { + .base = S3C64XX_GPC(0), + .ngpio = S3C64XX_GPIO_C_NR, + .label = "GPC", + }, + }, { + .chip = { + .base = S3C64XX_GPD(0), + .ngpio = S3C64XX_GPIO_D_NR, + .label = "GPD", + }, + }, { + .config = &samsung_gpio_cfgs[0], + .chip = { + .base = S3C64XX_GPE(0), + .ngpio = S3C64XX_GPIO_E_NR, + .label = "GPE", + }, + }, { + .base = S3C64XX_GPG_BASE, + .chip = { + .base = S3C64XX_GPG(0), + .ngpio = S3C64XX_GPIO_G_NR, + .label = "GPG", + }, + }, { + .base = S3C64XX_GPM_BASE, + .config = &samsung_gpio_cfgs[1], + .chip = { + .base = S3C64XX_GPM(0), + .ngpio = S3C64XX_GPIO_M_NR, + .label = "GPM", + .to_irq = s3c64xx_gpiolib_mbank_to_irq, + }, + }, +#endif +}; + +static struct samsung_gpio_chip s3c64xx_gpios_4bit2[] = { +#ifdef CONFIG_PLAT_S3C64XX + { + .base = S3C64XX_GPH_BASE + 0x4, + .chip = { + .base = S3C64XX_GPH(0), + .ngpio = S3C64XX_GPIO_H_NR, + .label = "GPH", + }, + }, { + .base = S3C64XX_GPK_BASE + 0x4, + .config = &samsung_gpio_cfgs[0], + .chip = { + .base = S3C64XX_GPK(0), + .ngpio = S3C64XX_GPIO_K_NR, + .label = "GPK", + }, + }, { + .base = S3C64XX_GPL_BASE + 0x4, + .config = &samsung_gpio_cfgs[1], + .chip = { + .base = S3C64XX_GPL(0), + .ngpio = S3C64XX_GPIO_L_NR, + .label = "GPL", + .to_irq = s3c64xx_gpiolib_lbank_to_irq, + }, + }, +#endif +}; + +static struct samsung_gpio_chip s3c64xx_gpios_2bit[] = { +#ifdef CONFIG_PLAT_S3C64XX + { + .base = S3C64XX_GPF_BASE, + .config = &samsung_gpio_cfgs[6], + .chip = { + .base = S3C64XX_GPF(0), + .ngpio = S3C64XX_GPIO_F_NR, + .label = "GPF", + }, + }, { + .config = &samsung_gpio_cfgs[7], + .chip = { + .base = S3C64XX_GPI(0), + .ngpio = S3C64XX_GPIO_I_NR, + .label = "GPI", + }, + }, { + .config = &samsung_gpio_cfgs[7], + .chip = { + .base = S3C64XX_GPJ(0), + .ngpio = S3C64XX_GPIO_J_NR, + .label = "GPJ", + }, + }, { + .config = &samsung_gpio_cfgs[6], + .chip = { + .base = S3C64XX_GPO(0), + .ngpio = S3C64XX_GPIO_O_NR, + .label = "GPO", + }, + }, { + .config = &samsung_gpio_cfgs[6], + .chip = { + .base = S3C64XX_GPP(0), + .ngpio = S3C64XX_GPIO_P_NR, + .label = "GPP", + }, + }, { + .config = &samsung_gpio_cfgs[6], + .chip = { + .base = S3C64XX_GPQ(0), + .ngpio = S3C64XX_GPIO_Q_NR, + .label = "GPQ", + }, + }, { + .base = S3C64XX_GPN_BASE, + .irq_base = IRQ_EINT(0), + .config = &samsung_gpio_cfgs[5], + .chip = { + .base = S3C64XX_GPN(0), + .ngpio = S3C64XX_GPIO_N_NR, + .label = "GPN", + .to_irq = samsung_gpiolib_to_irq, + }, + }, +#endif +}; + +/* + * S5P6440 GPIO bank summary: + * + * Bank GPIOs Style SlpCon ExtInt Group + * A 6 4Bit Yes 1 + * B 7 4Bit Yes 1 + * C 8 4Bit Yes 2 + * F 2 2Bit Yes 4 [1] + * G 7 4Bit Yes 5 + * H 10 4Bit[2] Yes 6 + * I 16 2Bit Yes None + * J 12 2Bit Yes None + * N 16 2Bit No IRQ_EINT + * P 8 2Bit Yes 8 + * R 15 4Bit[2] Yes 8 + */ + +static struct samsung_gpio_chip s5p6440_gpios_4bit[] = { +#ifdef CONFIG_CPU_S5P6440 + { + .chip = { + .base = S5P6440_GPA(0), + .ngpio = S5P6440_GPIO_A_NR, + .label = "GPA", + }, + }, { + .chip = { + .base = S5P6440_GPB(0), + .ngpio = S5P6440_GPIO_B_NR, + .label = "GPB", + }, + }, { + .chip = { + .base = S5P6440_GPC(0), + .ngpio = S5P6440_GPIO_C_NR, + .label = "GPC", + }, + }, { + .base = S5P64X0_GPG_BASE, + .chip = { + .base = S5P6440_GPG(0), + .ngpio = S5P6440_GPIO_G_NR, + .label = "GPG", + }, + }, +#endif +}; + +static struct samsung_gpio_chip s5p6440_gpios_4bit2[] = { +#ifdef CONFIG_CPU_S5P6440 + { + .base = S5P64X0_GPH_BASE + 0x4, + .chip = { + .base = S5P6440_GPH(0), + .ngpio = S5P6440_GPIO_H_NR, + .label = "GPH", + }, + }, +#endif +}; + +static struct samsung_gpio_chip s5p6440_gpios_rbank[] = { +#ifdef CONFIG_CPU_S5P6440 + { + .base = S5P64X0_GPR_BASE + 0x4, + .config = &s5p64x0_gpio_cfg_rbank, + .chip = { + .base = S5P6440_GPR(0), + .ngpio = S5P6440_GPIO_R_NR, + .label = "GPR", + }, + }, +#endif +}; + +static struct samsung_gpio_chip s5p6440_gpios_2bit[] = { +#ifdef CONFIG_CPU_S5P6440 + { + .base = S5P64X0_GPF_BASE, + .config = &samsung_gpio_cfgs[6], + .chip = { + .base = S5P6440_GPF(0), + .ngpio = S5P6440_GPIO_F_NR, + .label = "GPF", + }, + }, { + .base = S5P64X0_GPI_BASE, + .config = &samsung_gpio_cfgs[4], + .chip = { + .base = S5P6440_GPI(0), + .ngpio = S5P6440_GPIO_I_NR, + .label = "GPI", + }, + }, { + .base = S5P64X0_GPJ_BASE, + .config = &samsung_gpio_cfgs[4], + .chip = { + .base = S5P6440_GPJ(0), + .ngpio = S5P6440_GPIO_J_NR, + .label = "GPJ", + }, + }, { + .base = S5P64X0_GPN_BASE, + .config = &samsung_gpio_cfgs[5], + .chip = { + .base = S5P6440_GPN(0), + .ngpio = S5P6440_GPIO_N_NR, + .label = "GPN", + }, + }, { + .base = S5P64X0_GPP_BASE, + .config = &samsung_gpio_cfgs[6], + .chip = { + .base = S5P6440_GPP(0), + .ngpio = S5P6440_GPIO_P_NR, + .label = "GPP", + }, + }, +#endif +}; + +/* + * S5P6450 GPIO bank summary: + * + * Bank GPIOs Style SlpCon ExtInt Group + * A 6 4Bit Yes 1 + * B 7 4Bit Yes 1 + * C 8 4Bit Yes 2 + * D 8 4Bit Yes None + * F 2 2Bit Yes None + * G 14 4Bit[2] Yes 5 + * H 10 4Bit[2] Yes 6 + * I 16 2Bit Yes None + * J 12 2Bit Yes None + * K 5 4Bit Yes None + * N 16 2Bit No IRQ_EINT + * P 11 2Bit Yes 8 + * Q 14 2Bit Yes None + * R 15 4Bit[2] Yes None + * S 8 2Bit Yes None + * + * [1] BANKF pins 14,15 do not form part of the external interrupt sources + * [2] BANK has two control registers, GPxCON0 and GPxCON1 + */ + +static struct samsung_gpio_chip s5p6450_gpios_4bit[] = { +#ifdef CONFIG_CPU_S5P6450 + { + .chip = { + .base = S5P6450_GPA(0), + .ngpio = S5P6450_GPIO_A_NR, + .label = "GPA", + }, + }, { + .chip = { + .base = S5P6450_GPB(0), + .ngpio = S5P6450_GPIO_B_NR, + .label = "GPB", + }, + }, { + .chip = { + .base = S5P6450_GPC(0), + .ngpio = S5P6450_GPIO_C_NR, + .label = "GPC", + }, + }, { + .chip = { + .base = S5P6450_GPD(0), + .ngpio = S5P6450_GPIO_D_NR, + .label = "GPD", + }, + }, { + .base = S5P6450_GPK_BASE, + .chip = { + .base = S5P6450_GPK(0), + .ngpio = S5P6450_GPIO_K_NR, + .label = "GPK", + }, + }, +#endif +}; + +static struct samsung_gpio_chip s5p6450_gpios_4bit2[] = { +#ifdef CONFIG_CPU_S5P6450 + { + .base = S5P64X0_GPG_BASE + 0x4, + .chip = { + .base = S5P6450_GPG(0), + .ngpio = S5P6450_GPIO_G_NR, + .label = "GPG", + }, + }, { + .base = S5P64X0_GPH_BASE + 0x4, + .chip = { + .base = S5P6450_GPH(0), + .ngpio = S5P6450_GPIO_H_NR, + .label = "GPH", + }, + }, +#endif +}; + +static struct samsung_gpio_chip s5p6450_gpios_rbank[] = { +#ifdef CONFIG_CPU_S5P6450 + { + .base = S5P64X0_GPR_BASE + 0x4, + .config = &s5p64x0_gpio_cfg_rbank, + .chip = { + .base = S5P6450_GPR(0), + .ngpio = S5P6450_GPIO_R_NR, + .label = "GPR", + }, + }, +#endif +}; + +static struct samsung_gpio_chip s5p6450_gpios_2bit[] = { +#ifdef CONFIG_CPU_S5P6450 + { + .base = S5P64X0_GPF_BASE, + .config = &samsung_gpio_cfgs[6], + .chip = { + .base = S5P6450_GPF(0), + .ngpio = S5P6450_GPIO_F_NR, + .label = "GPF", + }, + }, { + .base = S5P64X0_GPI_BASE, + .config = &samsung_gpio_cfgs[4], + .chip = { + .base = S5P6450_GPI(0), + .ngpio = S5P6450_GPIO_I_NR, + .label = "GPI", + }, + }, { + .base = S5P64X0_GPJ_BASE, + .config = &samsung_gpio_cfgs[4], + .chip = { + .base = S5P6450_GPJ(0), + .ngpio = S5P6450_GPIO_J_NR, + .label = "GPJ", + }, + }, { + .base = S5P64X0_GPN_BASE, + .config = &samsung_gpio_cfgs[5], + .chip = { + .base = S5P6450_GPN(0), + .ngpio = S5P6450_GPIO_N_NR, + .label = "GPN", + }, + }, { + .base = S5P64X0_GPP_BASE, + .config = &samsung_gpio_cfgs[6], + .chip = { + .base = S5P6450_GPP(0), + .ngpio = S5P6450_GPIO_P_NR, + .label = "GPP", + }, + }, { + .base = S5P6450_GPQ_BASE, + .config = &samsung_gpio_cfgs[5], + .chip = { + .base = S5P6450_GPQ(0), + .ngpio = S5P6450_GPIO_Q_NR, + .label = "GPQ", + }, + }, { + .base = S5P6450_GPS_BASE, + .config = &samsung_gpio_cfgs[6], + .chip = { + .base = S5P6450_GPS(0), + .ngpio = S5P6450_GPIO_S_NR, + .label = "GPS", + }, + }, +#endif +}; + +/* + * S5PC100 GPIO bank summary: + * + * Bank GPIOs Style INT Type + * A0 8 4Bit GPIO_INT0 + * A1 5 4Bit GPIO_INT1 + * B 8 4Bit GPIO_INT2 + * C 5 4Bit GPIO_INT3 + * D 7 4Bit GPIO_INT4 + * E0 8 4Bit GPIO_INT5 + * E1 6 4Bit GPIO_INT6 + * F0 8 4Bit GPIO_INT7 + * F1 8 4Bit GPIO_INT8 + * F2 8 4Bit GPIO_INT9 + * F3 4 4Bit GPIO_INT10 + * G0 8 4Bit GPIO_INT11 + * G1 3 4Bit GPIO_INT12 + * G2 7 4Bit GPIO_INT13 + * G3 7 4Bit GPIO_INT14 + * H0 8 4Bit WKUP_INT + * H1 8 4Bit WKUP_INT + * H2 8 4Bit WKUP_INT + * H3 8 4Bit WKUP_INT + * I 8 4Bit GPIO_INT15 + * J0 8 4Bit GPIO_INT16 + * J1 5 4Bit GPIO_INT17 + * J2 8 4Bit GPIO_INT18 + * J3 8 4Bit GPIO_INT19 + * J4 4 4Bit GPIO_INT20 + * K0 8 4Bit None + * K1 6 4Bit None + * K2 8 4Bit None + * K3 8 4Bit None + * L0 8 4Bit None + * L1 8 4Bit None + * L2 8 4Bit None + * L3 8 4Bit None + */ + +static struct samsung_gpio_chip s5pc100_gpios_4bit[] = { +#ifdef CONFIG_CPU_S5PC100 + { + .chip = { + .base = S5PC100_GPA0(0), + .ngpio = S5PC100_GPIO_A0_NR, + .label = "GPA0", + }, + }, { + .chip = { + .base = S5PC100_GPA1(0), + .ngpio = S5PC100_GPIO_A1_NR, + .label = "GPA1", + }, + }, { + .chip = { + .base = S5PC100_GPB(0), + .ngpio = S5PC100_GPIO_B_NR, + .label = "GPB", + }, + }, { + .chip = { + .base = S5PC100_GPC(0), + .ngpio = S5PC100_GPIO_C_NR, + .label = "GPC", + }, + }, { + .chip = { + .base = S5PC100_GPD(0), + .ngpio = S5PC100_GPIO_D_NR, + .label = "GPD", + }, + }, { + .chip = { + .base = S5PC100_GPE0(0), + .ngpio = S5PC100_GPIO_E0_NR, + .label = "GPE0", + }, + }, { + .chip = { + .base = S5PC100_GPE1(0), + .ngpio = S5PC100_GPIO_E1_NR, + .label = "GPE1", + }, + }, { + .chip = { + .base = S5PC100_GPF0(0), + .ngpio = S5PC100_GPIO_F0_NR, + .label = "GPF0", + }, + }, { + .chip = { + .base = S5PC100_GPF1(0), + .ngpio = S5PC100_GPIO_F1_NR, + .label = "GPF1", + }, + }, { + .chip = { + .base = S5PC100_GPF2(0), + .ngpio = S5PC100_GPIO_F2_NR, + .label = "GPF2", + }, + }, { + .chip = { + .base = S5PC100_GPF3(0), + .ngpio = S5PC100_GPIO_F3_NR, + .label = "GPF3", + }, + }, { + .chip = { + .base = S5PC100_GPG0(0), + .ngpio = S5PC100_GPIO_G0_NR, + .label = "GPG0", + }, + }, { + .chip = { + .base = S5PC100_GPG1(0), + .ngpio = S5PC100_GPIO_G1_NR, + .label = "GPG1", + }, + }, { + .chip = { + .base = S5PC100_GPG2(0), + .ngpio = S5PC100_GPIO_G2_NR, + .label = "GPG2", + }, + }, { + .chip = { + .base = S5PC100_GPG3(0), + .ngpio = S5PC100_GPIO_G3_NR, + .label = "GPG3", + }, + }, { + .chip = { + .base = S5PC100_GPI(0), + .ngpio = S5PC100_GPIO_I_NR, + .label = "GPI", + }, + }, { + .chip = { + .base = S5PC100_GPJ0(0), + .ngpio = S5PC100_GPIO_J0_NR, + .label = "GPJ0", + }, + }, { + .chip = { + .base = S5PC100_GPJ1(0), + .ngpio = S5PC100_GPIO_J1_NR, + .label = "GPJ1", + }, + }, { + .chip = { + .base = S5PC100_GPJ2(0), + .ngpio = S5PC100_GPIO_J2_NR, + .label = "GPJ2", + }, + }, { + .chip = { + .base = S5PC100_GPJ3(0), + .ngpio = S5PC100_GPIO_J3_NR, + .label = "GPJ3", + }, + }, { + .chip = { + .base = S5PC100_GPJ4(0), + .ngpio = S5PC100_GPIO_J4_NR, + .label = "GPJ4", + }, + }, { + .chip = { + .base = S5PC100_GPK0(0), + .ngpio = S5PC100_GPIO_K0_NR, + .label = "GPK0", + }, + }, { + .chip = { + .base = S5PC100_GPK1(0), + .ngpio = S5PC100_GPIO_K1_NR, + .label = "GPK1", + }, + }, { + .chip = { + .base = S5PC100_GPK2(0), + .ngpio = S5PC100_GPIO_K2_NR, + .label = "GPK2", + }, + }, { + .chip = { + .base = S5PC100_GPK3(0), + .ngpio = S5PC100_GPIO_K3_NR, + .label = "GPK3", + }, + }, { + .chip = { + .base = S5PC100_GPL0(0), + .ngpio = S5PC100_GPIO_L0_NR, + .label = "GPL0", + }, + }, { + .chip = { + .base = S5PC100_GPL1(0), + .ngpio = S5PC100_GPIO_L1_NR, + .label = "GPL1", + }, + }, { + .chip = { + .base = S5PC100_GPL2(0), + .ngpio = S5PC100_GPIO_L2_NR, + .label = "GPL2", + }, + }, { + .chip = { + .base = S5PC100_GPL3(0), + .ngpio = S5PC100_GPIO_L3_NR, + .label = "GPL3", + }, + }, { + .chip = { + .base = S5PC100_GPL4(0), + .ngpio = S5PC100_GPIO_L4_NR, + .label = "GPL4", + }, + }, { + .base = (S5P_VA_GPIO + 0xC00), + .irq_base = IRQ_EINT(0), + .chip = { + .base = S5PC100_GPH0(0), + .ngpio = S5PC100_GPIO_H0_NR, + .label = "GPH0", + .to_irq = samsung_gpiolib_to_irq, + }, + }, { + .base = (S5P_VA_GPIO + 0xC20), + .irq_base = IRQ_EINT(8), + .chip = { + .base = S5PC100_GPH1(0), + .ngpio = S5PC100_GPIO_H1_NR, + .label = "GPH1", + .to_irq = samsung_gpiolib_to_irq, + }, + }, { + .base = (S5P_VA_GPIO + 0xC40), + .irq_base = IRQ_EINT(16), + .chip = { + .base = S5PC100_GPH2(0), + .ngpio = S5PC100_GPIO_H2_NR, + .label = "GPH2", + .to_irq = samsung_gpiolib_to_irq, + }, + }, { + .base = (S5P_VA_GPIO + 0xC60), + .irq_base = IRQ_EINT(24), + .chip = { + .base = S5PC100_GPH3(0), + .ngpio = S5PC100_GPIO_H3_NR, + .label = "GPH3", + .to_irq = samsung_gpiolib_to_irq, + }, + }, +#endif +}; + +/* + * Followings are the gpio banks in S5PV210/S5PC110 + * + * The 'config' member when left to NULL, is initialized to the default + * structure samsung_gpio_cfgs[3] in the init function below. + * + * The 'base' member is also initialized in the init function below. + * Note: The initialization of 'base' member of samsung_gpio_chip structure + * uses the above macro and depends on the banks being listed in order here. + */ + +static struct samsung_gpio_chip s5pv210_gpios_4bit[] = { +#ifdef CONFIG_CPU_S5PV210 + { + .chip = { + .base = S5PV210_GPA0(0), + .ngpio = S5PV210_GPIO_A0_NR, + .label = "GPA0", + }, + }, { + .chip = { + .base = S5PV210_GPA1(0), + .ngpio = S5PV210_GPIO_A1_NR, + .label = "GPA1", + }, + }, { + .chip = { + .base = S5PV210_GPB(0), + .ngpio = S5PV210_GPIO_B_NR, + .label = "GPB", + }, + }, { + .chip = { + .base = S5PV210_GPC0(0), + .ngpio = S5PV210_GPIO_C0_NR, + .label = "GPC0", + }, + }, { + .chip = { + .base = S5PV210_GPC1(0), + .ngpio = S5PV210_GPIO_C1_NR, + .label = "GPC1", + }, + }, { + .chip = { + .base = S5PV210_GPD0(0), + .ngpio = S5PV210_GPIO_D0_NR, + .label = "GPD0", + }, + }, { + .chip = { + .base = S5PV210_GPD1(0), + .ngpio = S5PV210_GPIO_D1_NR, + .label = "GPD1", + }, + }, { + .chip = { + .base = S5PV210_GPE0(0), + .ngpio = S5PV210_GPIO_E0_NR, + .label = "GPE0", + }, + }, { + .chip = { + .base = S5PV210_GPE1(0), + .ngpio = S5PV210_GPIO_E1_NR, + .label = "GPE1", + }, + }, { + .chip = { + .base = S5PV210_GPF0(0), + .ngpio = S5PV210_GPIO_F0_NR, + .label = "GPF0", + }, + }, { + .chip = { + .base = S5PV210_GPF1(0), + .ngpio = S5PV210_GPIO_F1_NR, + .label = "GPF1", + }, + }, { + .chip = { + .base = S5PV210_GPF2(0), + .ngpio = S5PV210_GPIO_F2_NR, + .label = "GPF2", + }, + }, { + .chip = { + .base = S5PV210_GPF3(0), + .ngpio = S5PV210_GPIO_F3_NR, + .label = "GPF3", + }, + }, { + .chip = { + .base = S5PV210_GPG0(0), + .ngpio = S5PV210_GPIO_G0_NR, + .label = "GPG0", + }, + }, { + .chip = { + .base = S5PV210_GPG1(0), + .ngpio = S5PV210_GPIO_G1_NR, + .label = "GPG1", + }, + }, { + .chip = { + .base = S5PV210_GPG2(0), + .ngpio = S5PV210_GPIO_G2_NR, + .label = "GPG2", + }, + }, { + .chip = { + .base = S5PV210_GPG3(0), + .ngpio = S5PV210_GPIO_G3_NR, + .label = "GPG3", + }, + }, { + .chip = { + .base = S5PV210_GPI(0), + .ngpio = S5PV210_GPIO_I_NR, + .label = "GPI", + }, + }, { + .chip = { + .base = S5PV210_GPJ0(0), + .ngpio = S5PV210_GPIO_J0_NR, + .label = "GPJ0", + }, + }, { + .chip = { + .base = S5PV210_GPJ1(0), + .ngpio = S5PV210_GPIO_J1_NR, + .label = "GPJ1", + }, + }, { + .chip = { + .base = S5PV210_GPJ2(0), + .ngpio = S5PV210_GPIO_J2_NR, + .label = "GPJ2", + }, + }, { + .chip = { + .base = S5PV210_GPJ3(0), + .ngpio = S5PV210_GPIO_J3_NR, + .label = "GPJ3", + }, + }, { + .chip = { + .base = S5PV210_GPJ4(0), + .ngpio = S5PV210_GPIO_J4_NR, + .label = "GPJ4", + }, + }, { + .chip = { + .base = S5PV210_MP01(0), + .ngpio = S5PV210_GPIO_MP01_NR, + .label = "MP01", + }, + }, { + .chip = { + .base = S5PV210_MP02(0), + .ngpio = S5PV210_GPIO_MP02_NR, + .label = "MP02", + }, + }, { + .chip = { + .base = S5PV210_MP03(0), + .ngpio = S5PV210_GPIO_MP03_NR, + .label = "MP03", + }, + }, { + .chip = { + .base = S5PV210_MP04(0), + .ngpio = S5PV210_GPIO_MP04_NR, + .label = "MP04", + }, + }, { + .chip = { + .base = S5PV210_MP05(0), + .ngpio = S5PV210_GPIO_MP05_NR, + .label = "MP05", + }, + }, { + .base = (S5P_VA_GPIO + 0xC00), + .irq_base = IRQ_EINT(0), + .chip = { + .base = S5PV210_GPH0(0), + .ngpio = S5PV210_GPIO_H0_NR, + .label = "GPH0", + .to_irq = samsung_gpiolib_to_irq, + }, + }, { + .base = (S5P_VA_GPIO + 0xC20), + .irq_base = IRQ_EINT(8), + .chip = { + .base = S5PV210_GPH1(0), + .ngpio = S5PV210_GPIO_H1_NR, + .label = "GPH1", + .to_irq = samsung_gpiolib_to_irq, + }, + }, { + .base = (S5P_VA_GPIO + 0xC40), + .irq_base = IRQ_EINT(16), + .chip = { + .base = S5PV210_GPH2(0), + .ngpio = S5PV210_GPIO_H2_NR, + .label = "GPH2", + .to_irq = samsung_gpiolib_to_irq, + }, + }, { + .base = (S5P_VA_GPIO + 0xC60), + .irq_base = IRQ_EINT(24), + .chip = { + .base = S5PV210_GPH3(0), + .ngpio = S5PV210_GPIO_H3_NR, + .label = "GPH3", + .to_irq = samsung_gpiolib_to_irq, + }, + }, +#endif +}; + +/* + * Followings are the gpio banks in EXYNOS4210 + * + * The 'config' member when left to NULL, is initialized to the default + * structure samsung_gpio_cfgs[3] in the init function below. + * + * The 'base' member is also initialized in the init function below. + * Note: The initialization of 'base' member of samsung_gpio_chip structure + * uses the above macro and depends on the banks being listed in order here. + */ + +static struct samsung_gpio_chip exynos4_gpios_1[] = { +#ifdef CONFIG_ARCH_EXYNOS4 + { + .chip = { + .base = EXYNOS4_GPA0(0), + .ngpio = EXYNOS4_GPIO_A0_NR, + .label = "GPA0", + }, + }, { + .chip = { + .base = EXYNOS4_GPA1(0), + .ngpio = EXYNOS4_GPIO_A1_NR, + .label = "GPA1", + }, + }, { + .chip = { + .base = EXYNOS4_GPB(0), + .ngpio = EXYNOS4_GPIO_B_NR, + .label = "GPB", + }, + }, { + .chip = { + .base = EXYNOS4_GPC0(0), + .ngpio = EXYNOS4_GPIO_C0_NR, + .label = "GPC0", + }, + }, { + .chip = { + .base = EXYNOS4_GPC1(0), + .ngpio = EXYNOS4_GPIO_C1_NR, + .label = "GPC1", + }, + }, { + .chip = { + .base = EXYNOS4_GPD0(0), + .ngpio = EXYNOS4_GPIO_D0_NR, + .label = "GPD0", + }, + }, { + .chip = { + .base = EXYNOS4_GPD1(0), + .ngpio = EXYNOS4_GPIO_D1_NR, + .label = "GPD1", + }, + }, { + .chip = { + .base = EXYNOS4_GPE0(0), + .ngpio = EXYNOS4_GPIO_E0_NR, + .label = "GPE0", + }, + }, { + .chip = { + .base = EXYNOS4_GPE1(0), + .ngpio = EXYNOS4_GPIO_E1_NR, + .label = "GPE1", + }, + }, { + .chip = { + .base = EXYNOS4_GPE2(0), + .ngpio = EXYNOS4_GPIO_E2_NR, + .label = "GPE2", + }, + }, { + .chip = { + .base = EXYNOS4_GPE3(0), + .ngpio = EXYNOS4_GPIO_E3_NR, + .label = "GPE3", + }, + }, { + .chip = { + .base = EXYNOS4_GPE4(0), + .ngpio = EXYNOS4_GPIO_E4_NR, + .label = "GPE4", + }, + }, { + .chip = { + .base = EXYNOS4_GPF0(0), + .ngpio = EXYNOS4_GPIO_F0_NR, + .label = "GPF0", + }, + }, { + .chip = { + .base = EXYNOS4_GPF1(0), + .ngpio = EXYNOS4_GPIO_F1_NR, + .label = "GPF1", + }, + }, { + .chip = { + .base = EXYNOS4_GPF2(0), + .ngpio = EXYNOS4_GPIO_F2_NR, + .label = "GPF2", + }, + }, { + .chip = { + .base = EXYNOS4_GPF3(0), + .ngpio = EXYNOS4_GPIO_F3_NR, + .label = "GPF3", + }, + }, +#endif +}; + +static struct samsung_gpio_chip exynos4_gpios_2[] = { +#ifdef CONFIG_ARCH_EXYNOS4 + { + .chip = { + .base = EXYNOS4_GPJ0(0), + .ngpio = EXYNOS4_GPIO_J0_NR, + .label = "GPJ0", + }, + }, { + .chip = { + .base = EXYNOS4_GPJ1(0), + .ngpio = EXYNOS4_GPIO_J1_NR, + .label = "GPJ1", + }, + }, { + .chip = { + .base = EXYNOS4_GPK0(0), + .ngpio = EXYNOS4_GPIO_K0_NR, + .label = "GPK0", + }, + }, { + .chip = { + .base = EXYNOS4_GPK1(0), + .ngpio = EXYNOS4_GPIO_K1_NR, + .label = "GPK1", + }, + }, { + .chip = { + .base = EXYNOS4_GPK2(0), + .ngpio = EXYNOS4_GPIO_K2_NR, + .label = "GPK2", + }, + }, { + .chip = { + .base = EXYNOS4_GPK3(0), + .ngpio = EXYNOS4_GPIO_K3_NR, + .label = "GPK3", + }, + }, { + .chip = { + .base = EXYNOS4_GPL0(0), + .ngpio = EXYNOS4_GPIO_L0_NR, + .label = "GPL0", + }, + }, { + .chip = { + .base = EXYNOS4_GPL1(0), + .ngpio = EXYNOS4_GPIO_L1_NR, + .label = "GPL1", + }, + }, { + .chip = { + .base = EXYNOS4_GPL2(0), + .ngpio = EXYNOS4_GPIO_L2_NR, + .label = "GPL2", + }, + }, { + .config = &samsung_gpio_cfgs[0], + .chip = { + .base = EXYNOS4_GPY0(0), + .ngpio = EXYNOS4_GPIO_Y0_NR, + .label = "GPY0", + }, + }, { + .config = &samsung_gpio_cfgs[0], + .chip = { + .base = EXYNOS4_GPY1(0), + .ngpio = EXYNOS4_GPIO_Y1_NR, + .label = "GPY1", + }, + }, { + .config = &samsung_gpio_cfgs[0], + .chip = { + .base = EXYNOS4_GPY2(0), + .ngpio = EXYNOS4_GPIO_Y2_NR, + .label = "GPY2", + }, + }, { + .config = &samsung_gpio_cfgs[0], + .chip = { + .base = EXYNOS4_GPY3(0), + .ngpio = EXYNOS4_GPIO_Y3_NR, + .label = "GPY3", + }, + }, { + .config = &samsung_gpio_cfgs[0], + .chip = { + .base = EXYNOS4_GPY4(0), + .ngpio = EXYNOS4_GPIO_Y4_NR, + .label = "GPY4", + }, + }, { + .config = &samsung_gpio_cfgs[0], + .chip = { + .base = EXYNOS4_GPY5(0), + .ngpio = EXYNOS4_GPIO_Y5_NR, + .label = "GPY5", + }, + }, { + .config = &samsung_gpio_cfgs[0], + .chip = { + .base = EXYNOS4_GPY6(0), + .ngpio = EXYNOS4_GPIO_Y6_NR, + .label = "GPY6", + }, + }, { + .base = (S5P_VA_GPIO2 + 0xC00), + .config = &samsung_gpio_cfgs[3], + .irq_base = IRQ_EINT(0), + .chip = { + .base = EXYNOS4_GPX0(0), + .ngpio = EXYNOS4_GPIO_X0_NR, + .label = "GPX0", + .to_irq = samsung_gpiolib_to_irq, + }, + }, { + .base = (S5P_VA_GPIO2 + 0xC20), + .config = &samsung_gpio_cfgs[3], + .irq_base = IRQ_EINT(8), + .chip = { + .base = EXYNOS4_GPX1(0), + .ngpio = EXYNOS4_GPIO_X1_NR, + .label = "GPX1", + .to_irq = samsung_gpiolib_to_irq, + }, + }, { + .base = (S5P_VA_GPIO2 + 0xC40), + .config = &samsung_gpio_cfgs[3], + .irq_base = IRQ_EINT(16), + .chip = { + .base = EXYNOS4_GPX2(0), + .ngpio = EXYNOS4_GPIO_X2_NR, + .label = "GPX2", + .to_irq = samsung_gpiolib_to_irq, + }, + }, { + .base = (S5P_VA_GPIO2 + 0xC60), + .config = &samsung_gpio_cfgs[3], + .irq_base = IRQ_EINT(24), + .chip = { + .base = EXYNOS4_GPX3(0), + .ngpio = EXYNOS4_GPIO_X3_NR, + .label = "GPX3", + .to_irq = samsung_gpiolib_to_irq, + }, + }, +#endif +}; + +static struct samsung_gpio_chip exynos4_gpios_3[] = { +#ifdef CONFIG_ARCH_EXYNOS4 + { + .chip = { + .base = EXYNOS4_GPZ(0), + .ngpio = EXYNOS4_GPIO_Z_NR, + .label = "GPZ", + }, + }, +#endif +}; + +/* TODO: cleanup soc_is_* */ +static __init int samsung_gpiolib_init(void) +{ + struct samsung_gpio_chip *chip; + int i, nr_chips; + int group = 0; + + samsung_gpiolib_set_cfg(samsung_gpio_cfgs, ARRAY_SIZE(samsung_gpio_cfgs)); + + if (soc_is_s3c24xx()) { + s3c24xx_gpiolib_add_chips(s3c24xx_gpios, + ARRAY_SIZE(s3c24xx_gpios), S3C24XX_VA_GPIO); + } else if (soc_is_s3c64xx()) { + samsung_gpiolib_add_2bit_chips(s3c64xx_gpios_2bit, + ARRAY_SIZE(s3c64xx_gpios_2bit), + S3C64XX_VA_GPIO + 0xE0, 0x20); + samsung_gpiolib_add_4bit_chips(s3c64xx_gpios_4bit, + ARRAY_SIZE(s3c64xx_gpios_4bit), + S3C64XX_VA_GPIO); + samsung_gpiolib_add_4bit2_chips(s3c64xx_gpios_4bit2, + ARRAY_SIZE(s3c64xx_gpios_4bit2)); + } else if (soc_is_s5p6440()) { + samsung_gpiolib_add_2bit_chips(s5p6440_gpios_2bit, + ARRAY_SIZE(s5p6440_gpios_2bit), NULL, 0x0); + samsung_gpiolib_add_4bit_chips(s5p6440_gpios_4bit, + ARRAY_SIZE(s5p6440_gpios_4bit), S5P_VA_GPIO); + samsung_gpiolib_add_4bit2_chips(s5p6440_gpios_4bit2, + ARRAY_SIZE(s5p6440_gpios_4bit2)); + s5p64x0_gpiolib_add_rbank(s5p6440_gpios_rbank, + ARRAY_SIZE(s5p6440_gpios_rbank)); + } else if (soc_is_s5p6450()) { + samsung_gpiolib_add_2bit_chips(s5p6450_gpios_2bit, + ARRAY_SIZE(s5p6450_gpios_2bit), NULL, 0x0); + samsung_gpiolib_add_4bit_chips(s5p6450_gpios_4bit, + ARRAY_SIZE(s5p6450_gpios_4bit), S5P_VA_GPIO); + samsung_gpiolib_add_4bit2_chips(s5p6450_gpios_4bit2, + ARRAY_SIZE(s5p6450_gpios_4bit2)); + s5p64x0_gpiolib_add_rbank(s5p6450_gpios_rbank, + ARRAY_SIZE(s5p6450_gpios_rbank)); + } else if (soc_is_s5pc100()) { + group = 0; + chip = s5pc100_gpios_4bit; + nr_chips = ARRAY_SIZE(s5pc100_gpios_4bit); + + for (i = 0; i < nr_chips; i++, chip++) { + if (!chip->config) { + chip->config = &samsung_gpio_cfgs[3]; + chip->group = group++; + } + } + samsung_gpiolib_add_4bit_chips(s5pc100_gpios_4bit, nr_chips, S5P_VA_GPIO); +#if defined(CONFIG_CPU_S5PC100) && defined(CONFIG_S5P_GPIO_INT) + s5p_register_gpioint_bank(IRQ_GPIOINT, 0, S5P_GPIOINT_GROUP_MAXNR); +#endif + } else if (soc_is_s5pv210()) { + group = 0; + chip = s5pv210_gpios_4bit; + nr_chips = ARRAY_SIZE(s5pv210_gpios_4bit); + + for (i = 0; i < nr_chips; i++, chip++) { + if (!chip->config) { + chip->config = &samsung_gpio_cfgs[3]; + chip->group = group++; + } + } + samsung_gpiolib_add_4bit_chips(s5pv210_gpios_4bit, nr_chips, S5P_VA_GPIO); +#if defined(CONFIG_CPU_S5PV210) && defined(CONFIG_S5P_GPIO_INT) + s5p_register_gpioint_bank(IRQ_GPIOINT, 0, S5P_GPIOINT_GROUP_MAXNR); +#endif + } else if (soc_is_exynos4210()) { + group = 0; + + /* gpio part1 */ + chip = exynos4_gpios_1; + nr_chips = ARRAY_SIZE(exynos4_gpios_1); + + for (i = 0; i < nr_chips; i++, chip++) { + if (!chip->config) { + chip->config = &exynos4_gpio_cfg; + chip->group = group++; + } + } + samsung_gpiolib_add_4bit_chips(exynos4_gpios_1, nr_chips, S5P_VA_GPIO1); + + /* gpio part2 */ + chip = exynos4_gpios_2; + nr_chips = ARRAY_SIZE(exynos4_gpios_2); + + for (i = 0; i < nr_chips; i++, chip++) { + if (!chip->config) { + chip->config = &exynos4_gpio_cfg; + chip->group = group++; + } + } + samsung_gpiolib_add_4bit_chips(exynos4_gpios_2, nr_chips, S5P_VA_GPIO2); + + /* gpio part3 */ + chip = exynos4_gpios_3; + nr_chips = ARRAY_SIZE(exynos4_gpios_3); + + for (i = 0; i < nr_chips; i++, chip++) { + if (!chip->config) { + chip->config = &exynos4_gpio_cfg; + chip->group = group++; + } + } + samsung_gpiolib_add_4bit_chips(exynos4_gpios_3, nr_chips, S5P_VA_GPIO3); + +#if defined(CONFIG_CPU_EXYNOS4210) && defined(CONFIG_S5P_GPIO_INT) + s5p_register_gpioint_bank(IRQ_GPIO_XA, 0, IRQ_GPIO1_NR_GROUPS); + s5p_register_gpioint_bank(IRQ_GPIO_XB, IRQ_GPIO1_NR_GROUPS, IRQ_GPIO2_NR_GROUPS); +#endif + } + + return 0; +} +core_initcall(samsung_gpiolib_init); + +int s3c_gpio_cfgpin(unsigned int pin, unsigned int config) +{ + struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin); + unsigned long flags; + int offset; + int ret; + + if (!chip) + return -EINVAL; + + offset = pin - chip->chip.base; + + samsung_gpio_lock(chip, flags); + ret = samsung_gpio_do_setcfg(chip, offset, config); + samsung_gpio_unlock(chip, flags); + + return ret; +} +EXPORT_SYMBOL(s3c_gpio_cfgpin); + +int s3c_gpio_cfgpin_range(unsigned int start, unsigned int nr, + unsigned int cfg) +{ + int ret; + + for (; nr > 0; nr--, start++) { + ret = s3c_gpio_cfgpin(start, cfg); + if (ret != 0) + return ret; + } + + return 0; +} +EXPORT_SYMBOL_GPL(s3c_gpio_cfgpin_range); + +int s3c_gpio_cfgall_range(unsigned int start, unsigned int nr, + unsigned int cfg, samsung_gpio_pull_t pull) +{ + int ret; + + for (; nr > 0; nr--, start++) { + s3c_gpio_setpull(start, pull); + ret = s3c_gpio_cfgpin(start, cfg); + if (ret != 0) + return ret; + } + + return 0; +} +EXPORT_SYMBOL_GPL(s3c_gpio_cfgall_range); + +unsigned s3c_gpio_getcfg(unsigned int pin) +{ + struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin); + unsigned long flags; + unsigned ret = 0; + int offset; + + if (chip) { + offset = pin - chip->chip.base; + + samsung_gpio_lock(chip, flags); + ret = samsung_gpio_do_getcfg(chip, offset); + samsung_gpio_unlock(chip, flags); + } + + return ret; +} +EXPORT_SYMBOL(s3c_gpio_getcfg); + +int s3c_gpio_setpull(unsigned int pin, samsung_gpio_pull_t pull) +{ + struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin); + unsigned long flags; + int offset, ret; + + if (!chip) + return -EINVAL; + + offset = pin - chip->chip.base; + + samsung_gpio_lock(chip, flags); + ret = samsung_gpio_do_setpull(chip, offset, pull); + samsung_gpio_unlock(chip, flags); + + return ret; +} +EXPORT_SYMBOL(s3c_gpio_setpull); + +samsung_gpio_pull_t s3c_gpio_getpull(unsigned int pin) +{ + struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin); + unsigned long flags; + int offset; + u32 pup = 0; + + if (chip) { + offset = pin - chip->chip.base; + + samsung_gpio_lock(chip, flags); + pup = samsung_gpio_do_getpull(chip, offset); + samsung_gpio_unlock(chip, flags); + } + + return (__force samsung_gpio_pull_t)pup; +} +EXPORT_SYMBOL(s3c_gpio_getpull); + +/* gpiolib wrappers until these are totally eliminated */ + +void s3c2410_gpio_pullup(unsigned int pin, unsigned int to) +{ + int ret; + + WARN_ON(to); /* should be none of these left */ + + if (!to) { + /* if pull is enabled, try first with up, and if that + * fails, try using down */ + + ret = s3c_gpio_setpull(pin, S3C_GPIO_PULL_UP); + if (ret) + s3c_gpio_setpull(pin, S3C_GPIO_PULL_DOWN); + } else { + s3c_gpio_setpull(pin, S3C_GPIO_PULL_NONE); + } +} +EXPORT_SYMBOL(s3c2410_gpio_pullup); + +void s3c2410_gpio_setpin(unsigned int pin, unsigned int to) +{ + /* do this via gpiolib until all users removed */ + + gpio_request(pin, "temporary"); + gpio_set_value(pin, to); + gpio_free(pin); +} +EXPORT_SYMBOL(s3c2410_gpio_setpin); + +unsigned int s3c2410_gpio_getpin(unsigned int pin) +{ + struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin); + unsigned long offs = pin - chip->chip.base; + + return __raw_readl(chip->base + 0x04) & (1 << offs); +} +EXPORT_SYMBOL(s3c2410_gpio_getpin); + +#ifdef CONFIG_S5P_GPIO_DRVSTR +s5p_gpio_drvstr_t s5p_gpio_get_drvstr(unsigned int pin) +{ + struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin); + unsigned int off; + void __iomem *reg; + int shift; + u32 drvstr; + + if (!chip) + return -EINVAL; + + off = pin - chip->chip.base; + shift = off * 2; + reg = chip->base + 0x0C; + + drvstr = __raw_readl(reg); + drvstr = drvstr >> shift; + drvstr &= 0x3; + + return (__force s5p_gpio_drvstr_t)drvstr; +} +EXPORT_SYMBOL(s5p_gpio_get_drvstr); + +int s5p_gpio_set_drvstr(unsigned int pin, s5p_gpio_drvstr_t drvstr) +{ + struct samsung_gpio_chip *chip = samsung_gpiolib_getchip(pin); + unsigned int off; + void __iomem *reg; + int shift; + u32 tmp; + + if (!chip) + return -EINVAL; + + off = pin - chip->chip.base; + shift = off * 2; + reg = chip->base + 0x0C; + + tmp = __raw_readl(reg); + tmp &= ~(0x3 << shift); + tmp |= drvstr << shift; + + __raw_writel(tmp, reg); + + return 0; +} +EXPORT_SYMBOL(s5p_gpio_set_drvstr); +#endif /* CONFIG_S5P_GPIO_DRVSTR */ + +#ifdef CONFIG_PLAT_S3C24XX +unsigned int s3c2410_modify_misccr(unsigned int clear, unsigned int change) +{ + unsigned long flags; + unsigned long misccr; + + local_irq_save(flags); + misccr = __raw_readl(S3C24XX_MISCCR); + misccr &= ~clear; + misccr ^= change; + __raw_writel(misccr, S3C24XX_MISCCR); + local_irq_restore(flags); + + return misccr; +} +EXPORT_SYMBOL(s3c2410_modify_misccr); +#endif diff --git a/drivers/gpu/drm/radeon/evergreen.c b/drivers/gpu/drm/radeon/evergreen.c index dc0a5b5..e8a7467 100644 --- a/drivers/gpu/drm/radeon/evergreen.c +++ b/drivers/gpu/drm/radeon/evergreen.c @@ -1404,7 +1404,8 @@ int evergreen_cp_resume(struct radeon_device *rdev) /* Initialize the ring buffer's read and write pointers */ WREG32(CP_RB_CNTL, tmp | RB_RPTR_WR_ENA); WREG32(CP_RB_RPTR_WR, 0); - WREG32(CP_RB_WPTR, 0); + rdev->cp.wptr = 0; + WREG32(CP_RB_WPTR, rdev->cp.wptr); /* set the wb address wether it's enabled or not */ WREG32(CP_RB_RPTR_ADDR, @@ -1426,7 +1427,6 @@ int evergreen_cp_resume(struct radeon_device *rdev) WREG32(CP_DEBUG, (1 << 27) | (1 << 28)); rdev->cp.rptr = RREG32(CP_RB_RPTR); - rdev->cp.wptr = RREG32(CP_RB_WPTR); evergreen_cp_start(rdev); rdev->cp.ready = true; @@ -3171,21 +3171,23 @@ int evergreen_suspend(struct radeon_device *rdev) } int evergreen_copy_blit(struct radeon_device *rdev, - uint64_t src_offset, uint64_t dst_offset, - unsigned num_pages, struct radeon_fence *fence) + uint64_t src_offset, + uint64_t dst_offset, + unsigned num_gpu_pages, + struct radeon_fence *fence) { int r; mutex_lock(&rdev->r600_blit.mutex); rdev->r600_blit.vb_ib = NULL; - r = evergreen_blit_prepare_copy(rdev, num_pages * RADEON_GPU_PAGE_SIZE); + r = evergreen_blit_prepare_copy(rdev, num_gpu_pages * RADEON_GPU_PAGE_SIZE); if (r) { if (rdev->r600_blit.vb_ib) radeon_ib_free(rdev, &rdev->r600_blit.vb_ib); mutex_unlock(&rdev->r600_blit.mutex); return r; } - evergreen_kms_blit_copy(rdev, src_offset, dst_offset, num_pages * RADEON_GPU_PAGE_SIZE); + evergreen_kms_blit_copy(rdev, src_offset, dst_offset, num_gpu_pages * RADEON_GPU_PAGE_SIZE); evergreen_blit_done_copy(rdev, fence); mutex_unlock(&rdev->r600_blit.mutex); return 0; diff --git a/drivers/gpu/drm/radeon/ni.c b/drivers/gpu/drm/radeon/ni.c index cbf57d7..99fbd79 100644 --- a/drivers/gpu/drm/radeon/ni.c +++ b/drivers/gpu/drm/radeon/ni.c @@ -1187,7 +1187,8 @@ int cayman_cp_resume(struct radeon_device *rdev) /* Initialize the ring buffer's read and write pointers */ WREG32(CP_RB0_CNTL, tmp | RB_RPTR_WR_ENA); - WREG32(CP_RB0_WPTR, 0); + rdev->cp.wptr = 0; + WREG32(CP_RB0_WPTR, rdev->cp.wptr); /* set the wb address wether it's enabled or not */ WREG32(CP_RB0_RPTR_ADDR, (rdev->wb.gpu_addr + RADEON_WB_CP_RPTR_OFFSET) & 0xFFFFFFFC); @@ -1207,7 +1208,6 @@ int cayman_cp_resume(struct radeon_device *rdev) WREG32(CP_RB0_BASE, rdev->cp.gpu_addr >> 8); rdev->cp.rptr = RREG32(CP_RB0_RPTR); - rdev->cp.wptr = RREG32(CP_RB0_WPTR); /* ring1 - compute only */ /* Set ring buffer size */ @@ -1220,7 +1220,8 @@ int cayman_cp_resume(struct radeon_device *rdev) /* Initialize the ring buffer's read and write pointers */ WREG32(CP_RB1_CNTL, tmp | RB_RPTR_WR_ENA); - WREG32(CP_RB1_WPTR, 0); + rdev->cp1.wptr = 0; + WREG32(CP_RB1_WPTR, rdev->cp1.wptr); /* set the wb address wether it's enabled or not */ WREG32(CP_RB1_RPTR_ADDR, (rdev->wb.gpu_addr + RADEON_WB_CP1_RPTR_OFFSET) & 0xFFFFFFFC); @@ -1232,7 +1233,6 @@ int cayman_cp_resume(struct radeon_device *rdev) WREG32(CP_RB1_BASE, rdev->cp1.gpu_addr >> 8); rdev->cp1.rptr = RREG32(CP_RB1_RPTR); - rdev->cp1.wptr = RREG32(CP_RB1_WPTR); /* ring2 - compute only */ /* Set ring buffer size */ @@ -1245,7 +1245,8 @@ int cayman_cp_resume(struct radeon_device *rdev) /* Initialize the ring buffer's read and write pointers */ WREG32(CP_RB2_CNTL, tmp | RB_RPTR_WR_ENA); - WREG32(CP_RB2_WPTR, 0); + rdev->cp2.wptr = 0; + WREG32(CP_RB2_WPTR, rdev->cp2.wptr); /* set the wb address wether it's enabled or not */ WREG32(CP_RB2_RPTR_ADDR, (rdev->wb.gpu_addr + RADEON_WB_CP2_RPTR_OFFSET) & 0xFFFFFFFC); @@ -1257,7 +1258,6 @@ int cayman_cp_resume(struct radeon_device *rdev) WREG32(CP_RB2_BASE, rdev->cp2.gpu_addr >> 8); rdev->cp2.rptr = RREG32(CP_RB2_RPTR); - rdev->cp2.wptr = RREG32(CP_RB2_WPTR); /* start the rings */ cayman_cp_start(rdev); diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c index f2204cb..7fcdbbb 100644 --- a/drivers/gpu/drm/radeon/r100.c +++ b/drivers/gpu/drm/radeon/r100.c @@ -721,11 +721,11 @@ void r100_fence_ring_emit(struct radeon_device *rdev, int r100_copy_blit(struct radeon_device *rdev, uint64_t src_offset, uint64_t dst_offset, - unsigned num_pages, + unsigned num_gpu_pages, struct radeon_fence *fence) { uint32_t cur_pages; - uint32_t stride_bytes = PAGE_SIZE; + uint32_t stride_bytes = RADEON_GPU_PAGE_SIZE; uint32_t pitch; uint32_t stride_pixels; unsigned ndw; @@ -737,7 +737,7 @@ int r100_copy_blit(struct radeon_device *rdev, /* radeon pitch is /64 */ pitch = stride_bytes / 64; stride_pixels = stride_bytes / 4; - num_loops = DIV_ROUND_UP(num_pages, 8191); + num_loops = DIV_ROUND_UP(num_gpu_pages, 8191); /* Ask for enough room for blit + flush + fence */ ndw = 64 + (10 * num_loops); @@ -746,12 +746,12 @@ int r100_copy_blit(struct radeon_device *rdev, DRM_ERROR("radeon: moving bo (%d) asking for %u dw.\n", r, ndw); return -EINVAL; } - while (num_pages > 0) { - cur_pages = num_pages; + while (num_gpu_pages > 0) { + cur_pages = num_gpu_pages; if (cur_pages > 8191) { cur_pages = 8191; } - num_pages -= cur_pages; + num_gpu_pages -= cur_pages; /* pages are in Y direction - height page width in X direction - width */ @@ -773,8 +773,8 @@ int r100_copy_blit(struct radeon_device *rdev, radeon_ring_write(rdev, (0x1fff) | (0x1fff << 16)); radeon_ring_write(rdev, 0); radeon_ring_write(rdev, (0x1fff) | (0x1fff << 16)); - radeon_ring_write(rdev, num_pages); - radeon_ring_write(rdev, num_pages); + radeon_ring_write(rdev, num_gpu_pages); + radeon_ring_write(rdev, num_gpu_pages); radeon_ring_write(rdev, cur_pages | (stride_pixels << 16)); } radeon_ring_write(rdev, PACKET0(RADEON_DSTCACHE_CTLSTAT, 0)); @@ -990,7 +990,8 @@ int r100_cp_init(struct radeon_device *rdev, unsigned ring_size) /* Force read & write ptr to 0 */ WREG32(RADEON_CP_RB_CNTL, tmp | RADEON_RB_RPTR_WR_ENA | RADEON_RB_NO_UPDATE); WREG32(RADEON_CP_RB_RPTR_WR, 0); - WREG32(RADEON_CP_RB_WPTR, 0); + rdev->cp.wptr = 0; + WREG32(RADEON_CP_RB_WPTR, rdev->cp.wptr); /* set the wb address whether it's enabled or not */ WREG32(R_00070C_CP_RB_RPTR_ADDR, @@ -1007,9 +1008,6 @@ int r100_cp_init(struct radeon_device *rdev, unsigned ring_size) WREG32(RADEON_CP_RB_CNTL, tmp); udelay(10); rdev->cp.rptr = RREG32(RADEON_CP_RB_RPTR); - rdev->cp.wptr = RREG32(RADEON_CP_RB_WPTR); - /* protect against crazy HW on resume */ - rdev->cp.wptr &= rdev->cp.ptr_mask; /* Set cp mode to bus mastering & enable cp*/ WREG32(RADEON_CP_CSQ_MODE, REG_SET(RADEON_INDIRECT2_START, indirect2_start) | diff --git a/drivers/gpu/drm/radeon/r200.c b/drivers/gpu/drm/radeon/r200.c index f240583..a1f3ba0 100644 --- a/drivers/gpu/drm/radeon/r200.c +++ b/drivers/gpu/drm/radeon/r200.c @@ -84,7 +84,7 @@ static int r200_get_vtx_size_0(uint32_t vtx_fmt_0) int r200_copy_dma(struct radeon_device *rdev, uint64_t src_offset, uint64_t dst_offset, - unsigned num_pages, + unsigned num_gpu_pages, struct radeon_fence *fence) { uint32_t size; @@ -93,7 +93,7 @@ int r200_copy_dma(struct radeon_device *rdev, int r = 0; /* radeon pitch is /64 */ - size = num_pages << PAGE_SHIFT; + size = num_gpu_pages << RADEON_GPU_PAGE_SHIFT; num_loops = DIV_ROUND_UP(size, 0x1FFFFF); r = radeon_ring_lock(rdev, num_loops * 4 + 64); if (r) { diff --git a/drivers/gpu/drm/radeon/r600.c b/drivers/gpu/drm/radeon/r600.c index aa5571b..720dd99 100644 --- a/drivers/gpu/drm/radeon/r600.c +++ b/drivers/gpu/drm/radeon/r600.c @@ -2209,7 +2209,8 @@ int r600_cp_resume(struct radeon_device *rdev) /* Initialize the ring buffer's read and write pointers */ WREG32(CP_RB_CNTL, tmp | RB_RPTR_WR_ENA); WREG32(CP_RB_RPTR_WR, 0); - WREG32(CP_RB_WPTR, 0); + rdev->cp.wptr = 0; + WREG32(CP_RB_WPTR, rdev->cp.wptr); /* set the wb address whether it's enabled or not */ WREG32(CP_RB_RPTR_ADDR, @@ -2231,7 +2232,6 @@ int r600_cp_resume(struct radeon_device *rdev) WREG32(CP_DEBUG, (1 << 27) | (1 << 28)); rdev->cp.rptr = RREG32(CP_RB_RPTR); - rdev->cp.wptr = RREG32(CP_RB_WPTR); r600_cp_start(rdev); rdev->cp.ready = true; @@ -2353,21 +2353,23 @@ void r600_fence_ring_emit(struct radeon_device *rdev, } int r600_copy_blit(struct radeon_device *rdev, - uint64_t src_offset, uint64_t dst_offset, - unsigned num_pages, struct radeon_fence *fence) + uint64_t src_offset, + uint64_t dst_offset, + unsigned num_gpu_pages, + struct radeon_fence *fence) { int r; mutex_lock(&rdev->r600_blit.mutex); rdev->r600_blit.vb_ib = NULL; - r = r600_blit_prepare_copy(rdev, num_pages * RADEON_GPU_PAGE_SIZE); + r = r600_blit_prepare_copy(rdev, num_gpu_pages * RADEON_GPU_PAGE_SIZE); if (r) { if (rdev->r600_blit.vb_ib) radeon_ib_free(rdev, &rdev->r600_blit.vb_ib); mutex_unlock(&rdev->r600_blit.mutex); return r; } - r600_kms_blit_copy(rdev, src_offset, dst_offset, num_pages * RADEON_GPU_PAGE_SIZE); + r600_kms_blit_copy(rdev, src_offset, dst_offset, num_gpu_pages * RADEON_GPU_PAGE_SIZE); r600_blit_done_copy(rdev, fence); mutex_unlock(&rdev->r600_blit.mutex); return 0; diff --git a/drivers/gpu/drm/radeon/radeon.h b/drivers/gpu/drm/radeon/radeon.h index 32807ba..c1e056b 100644 --- a/drivers/gpu/drm/radeon/radeon.h +++ b/drivers/gpu/drm/radeon/radeon.h @@ -322,6 +322,7 @@ union radeon_gart_table { #define RADEON_GPU_PAGE_SIZE 4096 #define RADEON_GPU_PAGE_MASK (RADEON_GPU_PAGE_SIZE - 1) +#define RADEON_GPU_PAGE_SHIFT 12 struct radeon_gart { dma_addr_t table_addr; @@ -914,17 +915,17 @@ struct radeon_asic { int (*copy_blit)(struct radeon_device *rdev, uint64_t src_offset, uint64_t dst_offset, - unsigned num_pages, + unsigned num_gpu_pages, struct radeon_fence *fence); int (*copy_dma)(struct radeon_device *rdev, uint64_t src_offset, uint64_t dst_offset, - unsigned num_pages, + unsigned num_gpu_pages, struct radeon_fence *fence); int (*copy)(struct radeon_device *rdev, uint64_t src_offset, uint64_t dst_offset, - unsigned num_pages, + unsigned num_gpu_pages, struct radeon_fence *fence); uint32_t (*get_engine_clock)(struct radeon_device *rdev); void (*set_engine_clock)(struct radeon_device *rdev, uint32_t eng_clock); diff --git a/drivers/gpu/drm/radeon/radeon_asic.h b/drivers/gpu/drm/radeon/radeon_asic.h index 3d7a0d7..3dedaa0 100644 --- a/drivers/gpu/drm/radeon/radeon_asic.h +++ b/drivers/gpu/drm/radeon/radeon_asic.h @@ -75,7 +75,7 @@ uint32_t r100_pll_rreg(struct radeon_device *rdev, uint32_t reg); int r100_copy_blit(struct radeon_device *rdev, uint64_t src_offset, uint64_t dst_offset, - unsigned num_pages, + unsigned num_gpu_pages, struct radeon_fence *fence); int r100_set_surface_reg(struct radeon_device *rdev, int reg, uint32_t tiling_flags, uint32_t pitch, @@ -143,7 +143,7 @@ extern void r100_post_page_flip(struct radeon_device *rdev, int crtc); extern int r200_copy_dma(struct radeon_device *rdev, uint64_t src_offset, uint64_t dst_offset, - unsigned num_pages, + unsigned num_gpu_pages, struct radeon_fence *fence); void r200_set_safe_registers(struct radeon_device *rdev); @@ -311,7 +311,7 @@ void r600_ring_ib_execute(struct radeon_device *rdev, struct radeon_ib *ib); int r600_ring_test(struct radeon_device *rdev); int r600_copy_blit(struct radeon_device *rdev, uint64_t src_offset, uint64_t dst_offset, - unsigned num_pages, struct radeon_fence *fence); + unsigned num_gpu_pages, struct radeon_fence *fence); void r600_hpd_init(struct radeon_device *rdev); void r600_hpd_fini(struct radeon_device *rdev); bool r600_hpd_sense(struct radeon_device *rdev, enum radeon_hpd_id hpd); @@ -403,7 +403,7 @@ void evergreen_bandwidth_update(struct radeon_device *rdev); void evergreen_ring_ib_execute(struct radeon_device *rdev, struct radeon_ib *ib); int evergreen_copy_blit(struct radeon_device *rdev, uint64_t src_offset, uint64_t dst_offset, - unsigned num_pages, struct radeon_fence *fence); + unsigned num_gpu_pages, struct radeon_fence *fence); void evergreen_hpd_init(struct radeon_device *rdev); void evergreen_hpd_fini(struct radeon_device *rdev); bool evergreen_hpd_sense(struct radeon_device *rdev, enum radeon_hpd_id hpd); diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c index 6cc17fb..6adb3e5 100644 --- a/drivers/gpu/drm/radeon/radeon_display.c +++ b/drivers/gpu/drm/radeon/radeon_display.c @@ -473,8 +473,8 @@ pflip_cleanup: spin_lock_irqsave(&dev->event_lock, flags); radeon_crtc->unpin_work = NULL; unlock_free: - drm_gem_object_unreference_unlocked(old_radeon_fb->obj); spin_unlock_irqrestore(&dev->event_lock, flags); + drm_gem_object_unreference_unlocked(old_radeon_fb->obj); radeon_fence_unref(&work->fence); kfree(work); diff --git a/drivers/gpu/drm/radeon/radeon_encoders.c b/drivers/gpu/drm/radeon/radeon_encoders.c index 319d85d..13690f3 100644 --- a/drivers/gpu/drm/radeon/radeon_encoders.c +++ b/drivers/gpu/drm/radeon/radeon_encoders.c @@ -1507,7 +1507,14 @@ radeon_atom_encoder_dpms(struct drm_encoder *encoder, int mode) switch (mode) { case DRM_MODE_DPMS_ON: args.ucAction = ATOM_ENABLE; - atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args); + /* workaround for DVOOutputControl on some RS690 systems */ + if (radeon_encoder->encoder_id == ENCODER_OBJECT_ID_INTERNAL_DDI) { + u32 reg = RREG32(RADEON_BIOS_3_SCRATCH); + WREG32(RADEON_BIOS_3_SCRATCH, reg & ~ATOM_S3_DFP2I_ACTIVE); + atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args); + WREG32(RADEON_BIOS_3_SCRATCH, reg); + } else + atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args); if (radeon_encoder->devices & (ATOM_DEVICE_LCD_SUPPORT)) { args.ucAction = ATOM_LCD_BLON; atom_execute_table(rdev->mode_info.atom_context, index, (uint32_t *)&args); diff --git a/drivers/gpu/drm/radeon/radeon_ttm.c b/drivers/gpu/drm/radeon/radeon_ttm.c index 9b86fb0..0b5468b 100644 --- a/drivers/gpu/drm/radeon/radeon_ttm.c +++ b/drivers/gpu/drm/radeon/radeon_ttm.c @@ -277,7 +277,12 @@ static int radeon_move_blit(struct ttm_buffer_object *bo, DRM_ERROR("Trying to move memory with CP turned off.\n"); return -EINVAL; } - r = radeon_copy(rdev, old_start, new_start, new_mem->num_pages, fence); + + BUILD_BUG_ON((PAGE_SIZE % RADEON_GPU_PAGE_SIZE) != 0); + + r = radeon_copy(rdev, old_start, new_start, + new_mem->num_pages * (PAGE_SIZE / RADEON_GPU_PAGE_SIZE), /* GPU pages */ + fence); /* FIXME: handle copy error */ r = ttm_bo_move_accel_cleanup(bo, (void *)fence, NULL, evict, no_wait_reserve, no_wait_gpu, new_mem); diff --git a/drivers/gpu/drm/ttm/ttm_bo.c b/drivers/gpu/drm/ttm/ttm_bo.c index a4d38d8..ef06194 100644 --- a/drivers/gpu/drm/ttm/ttm_bo.c +++ b/drivers/gpu/drm/ttm/ttm_bo.c @@ -394,7 +394,8 @@ static int ttm_bo_handle_move_mem(struct ttm_buffer_object *bo, if (!(new_man->flags & TTM_MEMTYPE_FLAG_FIXED)) { if (bo->ttm == NULL) { - ret = ttm_bo_add_ttm(bo, false); + bool zero = !(old_man->flags & TTM_MEMTYPE_FLAG_FIXED); + ret = ttm_bo_add_ttm(bo, zero); if (ret) goto out_err; } diff --git a/drivers/hid/hid-wacom.c b/drivers/hid/hid-wacom.c index a597039..72ca689 100644 --- a/drivers/hid/hid-wacom.c +++ b/drivers/hid/hid-wacom.c @@ -373,6 +373,8 @@ static int wacom_probe(struct hid_device *hdev, hidinput = list_entry(hdev->inputs.next, struct hid_input, list); input = hidinput->input; + __set_bit(INPUT_PROP_POINTER, input->propbit); + /* Basics */ input->evbit[0] |= BIT(EV_KEY) | BIT(EV_ABS) | BIT(EV_REL); diff --git a/drivers/hwmon/coretemp.c b/drivers/hwmon/coretemp.c index 59d83e8..44b2391 100644 --- a/drivers/hwmon/coretemp.c +++ b/drivers/hwmon/coretemp.c @@ -36,17 +36,25 @@ #include <linux/cpu.h> #include <linux/pci.h> #include <linux/smp.h> +#include <linux/moduleparam.h> #include <asm/msr.h> #include <asm/processor.h> #define DRVNAME "coretemp" +/* + * force_tjmax only matters when TjMax can't be read from the CPU itself. + * When set, it replaces the driver's suboptimal heuristic. + */ +static int force_tjmax; +module_param_named(tjmax, force_tjmax, int, 0444); +MODULE_PARM_DESC(tjmax, "TjMax value in degrees Celsius"); + #define BASE_SYSFS_ATTR_NO 2 /* Sysfs Base attr no for coretemp */ #define NUM_REAL_CORES 16 /* Number of Real cores per cpu */ #define CORETEMP_NAME_LENGTH 17 /* String Length of attrs */ #define MAX_CORE_ATTRS 4 /* Maximum no of basic attrs */ -#define MAX_THRESH_ATTRS 3 /* Maximum no of Threshold attrs */ -#define TOTAL_ATTRS (MAX_CORE_ATTRS + MAX_THRESH_ATTRS) +#define TOTAL_ATTRS (MAX_CORE_ATTRS + 1) #define MAX_CORE_DATA (NUM_REAL_CORES + BASE_SYSFS_ATTR_NO) #ifdef CONFIG_SMP @@ -69,8 +77,6 @@ * This value is passed as "id" field to rdmsr/wrmsr functions. * @status_reg: One of IA32_THERM_STATUS or IA32_PACKAGE_THERM_STATUS, * from where the temperature values should be read. - * @intrpt_reg: One of IA32_THERM_INTERRUPT or IA32_PACKAGE_THERM_INTERRUPT, - * from where the thresholds are read. * @attr_size: Total number of pre-core attrs displayed in the sysfs. * @is_pkg_data: If this is 1, the temp_data holds pkgtemp data. * Otherwise, temp_data holds coretemp data. @@ -79,13 +85,11 @@ struct temp_data { int temp; int ttarget; - int tmin; int tjmax; unsigned long last_updated; unsigned int cpu; u32 cpu_core_id; u32 status_reg; - u32 intrpt_reg; int attr_size; bool is_pkg_data; bool valid; @@ -143,19 +147,6 @@ static ssize_t show_crit_alarm(struct device *dev, return sprintf(buf, "%d\n", (eax >> 5) & 1); } -static ssize_t show_max_alarm(struct device *dev, - struct device_attribute *devattr, char *buf) -{ - u32 eax, edx; - struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); - struct platform_data *pdata = dev_get_drvdata(dev); - struct temp_data *tdata = pdata->core_data[attr->index]; - - rdmsr_on_cpu(tdata->cpu, tdata->status_reg, &eax, &edx); - - return sprintf(buf, "%d\n", !!(eax & THERM_STATUS_THRESHOLD1)); -} - static ssize_t show_tjmax(struct device *dev, struct device_attribute *devattr, char *buf) { @@ -174,83 +165,6 @@ static ssize_t show_ttarget(struct device *dev, return sprintf(buf, "%d\n", pdata->core_data[attr->index]->ttarget); } -static ssize_t store_ttarget(struct device *dev, - struct device_attribute *devattr, - const char *buf, size_t count) -{ - struct platform_data *pdata = dev_get_drvdata(dev); - struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); - struct temp_data *tdata = pdata->core_data[attr->index]; - u32 eax, edx; - unsigned long val; - int diff; - - if (strict_strtoul(buf, 10, &val)) - return -EINVAL; - - /* - * THERM_MASK_THRESHOLD1 is 7 bits wide. Values are entered in terms - * of milli degree celsius. Hence don't accept val > (127 * 1000) - */ - if (val > tdata->tjmax || val > 127000) - return -EINVAL; - - diff = (tdata->tjmax - val) / 1000; - - mutex_lock(&tdata->update_lock); - rdmsr_on_cpu(tdata->cpu, tdata->intrpt_reg, &eax, &edx); - eax = (eax & ~THERM_MASK_THRESHOLD1) | - (diff << THERM_SHIFT_THRESHOLD1); - wrmsr_on_cpu(tdata->cpu, tdata->intrpt_reg, eax, edx); - tdata->ttarget = val; - mutex_unlock(&tdata->update_lock); - - return count; -} - -static ssize_t show_tmin(struct device *dev, - struct device_attribute *devattr, char *buf) -{ - struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); - struct platform_data *pdata = dev_get_drvdata(dev); - - return sprintf(buf, "%d\n", pdata->core_data[attr->index]->tmin); -} - -static ssize_t store_tmin(struct device *dev, - struct device_attribute *devattr, - const char *buf, size_t count) -{ - struct platform_data *pdata = dev_get_drvdata(dev); - struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); - struct temp_data *tdata = pdata->core_data[attr->index]; - u32 eax, edx; - unsigned long val; - int diff; - - if (strict_strtoul(buf, 10, &val)) - return -EINVAL; - - /* - * THERM_MASK_THRESHOLD0 is 7 bits wide. Values are entered in terms - * of milli degree celsius. Hence don't accept val > (127 * 1000) - */ - if (val > tdata->tjmax || val > 127000) - return -EINVAL; - - diff = (tdata->tjmax - val) / 1000; - - mutex_lock(&tdata->update_lock); - rdmsr_on_cpu(tdata->cpu, tdata->intrpt_reg, &eax, &edx); - eax = (eax & ~THERM_MASK_THRESHOLD0) | - (diff << THERM_SHIFT_THRESHOLD0); - wrmsr_on_cpu(tdata->cpu, tdata->intrpt_reg, eax, edx); - tdata->tmin = val; - mutex_unlock(&tdata->update_lock); - - return count; -} - static ssize_t show_temp(struct device *dev, struct device_attribute *devattr, char *buf) { @@ -374,7 +288,6 @@ static int adjust_tjmax(struct cpuinfo_x86 *c, u32 id, struct device *dev) static int get_tjmax(struct cpuinfo_x86 *c, u32 id, struct device *dev) { - /* The 100C is default for both mobile and non mobile CPUs */ int err; u32 eax, edx; u32 val; @@ -385,7 +298,8 @@ static int get_tjmax(struct cpuinfo_x86 *c, u32 id, struct device *dev) */ err = rdmsr_safe_on_cpu(id, MSR_IA32_TEMPERATURE_TARGET, &eax, &edx); if (err) { - dev_warn(dev, "Unable to read TjMax from CPU.\n"); + if (c->x86_model > 0xe && c->x86_model != 0x1c) + dev_warn(dev, "Unable to read TjMax from CPU %u\n", id); } else { val = (eax >> 16) & 0xff; /* @@ -393,11 +307,17 @@ static int get_tjmax(struct cpuinfo_x86 *c, u32 id, struct device *dev) * will be used */ if (val) { - dev_info(dev, "TjMax is %d C.\n", val); + dev_dbg(dev, "TjMax is %d degrees C\n", val); return val * 1000; } } + if (force_tjmax) { + dev_notice(dev, "TjMax forced to %d degrees C by user\n", + force_tjmax); + return force_tjmax * 1000; + } + /* * An assumption is made for early CPUs and unreadable MSR. * NOTE: the calculated value may not be correct. @@ -414,21 +334,6 @@ static void __devinit get_ucode_rev_on_cpu(void *edx) rdmsr(MSR_IA32_UCODE_REV, eax, *(u32 *)edx); } -static int get_pkg_tjmax(unsigned int cpu, struct device *dev) -{ - int err; - u32 eax, edx, val; - - err = rdmsr_safe_on_cpu(cpu, MSR_IA32_TEMPERATURE_TARGET, &eax, &edx); - if (!err) { - val = (eax >> 16) & 0xff; - if (val) - return val * 1000; - } - dev_warn(dev, "Unable to read Pkg-TjMax from CPU:%u\n", cpu); - return 100000; /* Default TjMax: 100 degree celsius */ -} - static int create_name_attr(struct platform_data *pdata, struct device *dev) { sysfs_attr_init(&pdata->name_attr.attr); @@ -442,19 +347,14 @@ static int create_core_attrs(struct temp_data *tdata, struct device *dev, int attr_no) { int err, i; - static ssize_t (*rd_ptr[TOTAL_ATTRS]) (struct device *dev, + static ssize_t (*const rd_ptr[TOTAL_ATTRS]) (struct device *dev, struct device_attribute *devattr, char *buf) = { show_label, show_crit_alarm, show_temp, show_tjmax, - show_max_alarm, show_ttarget, show_tmin }; - static ssize_t (*rw_ptr[TOTAL_ATTRS]) (struct device *dev, - struct device_attribute *devattr, const char *buf, - size_t count) = { NULL, NULL, NULL, NULL, NULL, - store_ttarget, store_tmin }; - static const char *names[TOTAL_ATTRS] = { + show_ttarget }; + static const char *const names[TOTAL_ATTRS] = { "temp%d_label", "temp%d_crit_alarm", "temp%d_input", "temp%d_crit", - "temp%d_max_alarm", "temp%d_max", - "temp%d_max_hyst" }; + "temp%d_max" }; for (i = 0; i < tdata->attr_size; i++) { snprintf(tdata->attr_name[i], CORETEMP_NAME_LENGTH, names[i], @@ -462,10 +362,6 @@ static int create_core_attrs(struct temp_data *tdata, struct device *dev, sysfs_attr_init(&tdata->sd_attrs[i].dev_attr.attr); tdata->sd_attrs[i].dev_attr.attr.name = tdata->attr_name[i]; tdata->sd_attrs[i].dev_attr.attr.mode = S_IRUGO; - if (rw_ptr[i]) { - tdata->sd_attrs[i].dev_attr.attr.mode |= S_IWUSR; - tdata->sd_attrs[i].dev_attr.store = rw_ptr[i]; - } tdata->sd_attrs[i].dev_attr.show = rd_ptr[i]; tdata->sd_attrs[i].index = attr_no; err = device_create_file(dev, &tdata->sd_attrs[i].dev_attr); @@ -538,8 +434,6 @@ static struct temp_data *init_temp_data(unsigned int cpu, int pkg_flag) tdata->status_reg = pkg_flag ? MSR_IA32_PACKAGE_THERM_STATUS : MSR_IA32_THERM_STATUS; - tdata->intrpt_reg = pkg_flag ? MSR_IA32_PACKAGE_THERM_INTERRUPT : - MSR_IA32_THERM_INTERRUPT; tdata->is_pkg_data = pkg_flag; tdata->cpu = cpu; tdata->cpu_core_id = TO_CORE_ID(cpu); @@ -548,11 +442,11 @@ static struct temp_data *init_temp_data(unsigned int cpu, int pkg_flag) return tdata; } -static int create_core_data(struct platform_data *pdata, - struct platform_device *pdev, +static int create_core_data(struct platform_device *pdev, unsigned int cpu, int pkg_flag) { struct temp_data *tdata; + struct platform_data *pdata = platform_get_drvdata(pdev); struct cpuinfo_x86 *c = &cpu_data(cpu); u32 eax, edx; int err, attr_no; @@ -588,20 +482,21 @@ static int create_core_data(struct platform_data *pdata, goto exit_free; /* We can access status register. Get Critical Temperature */ - if (pkg_flag) - tdata->tjmax = get_pkg_tjmax(pdev->id, &pdev->dev); - else - tdata->tjmax = get_tjmax(c, cpu, &pdev->dev); + tdata->tjmax = get_tjmax(c, cpu, &pdev->dev); /* - * Test if we can access the intrpt register. If so, increase the - * 'size' enough to have ttarget/tmin/max_alarm interfaces. - * Initialize ttarget with bits 16:22 of MSR_IA32_THERM_INTERRUPT + * Read the still undocumented bits 8:15 of IA32_TEMPERATURE_TARGET. + * The target temperature is available on older CPUs but not in this + * register. Atoms don't have the register at all. */ - err = rdmsr_safe_on_cpu(cpu, tdata->intrpt_reg, &eax, &edx); - if (!err) { - tdata->attr_size += MAX_THRESH_ATTRS; - tdata->ttarget = tdata->tjmax - ((eax >> 16) & 0x7f) * 1000; + if (c->x86_model > 0xe && c->x86_model != 0x1c) { + err = rdmsr_safe_on_cpu(cpu, MSR_IA32_TEMPERATURE_TARGET, + &eax, &edx); + if (!err) { + tdata->ttarget + = tdata->tjmax - ((eax >> 8) & 0xff) * 1000; + tdata->attr_size++; + } } pdata->core_data[attr_no] = tdata; @@ -619,16 +514,13 @@ exit_free: static void coretemp_add_core(unsigned int cpu, int pkg_flag) { - struct platform_data *pdata; struct platform_device *pdev = coretemp_get_pdev(cpu); int err; if (!pdev) return; - pdata = platform_get_drvdata(pdev); - - err = create_core_data(pdata, pdev, cpu, pkg_flag); + err = create_core_data(pdev, cpu, pkg_flag); if (err) dev_err(&pdev->dev, "Adding Core %u failed\n", cpu); } @@ -666,7 +558,7 @@ static int __devinit coretemp_probe(struct platform_device *pdev) if (err) goto exit_free; - pdata->phys_proc_id = TO_PHYS_ID(pdev->id); + pdata->phys_proc_id = pdev->id; platform_set_drvdata(pdev, pdata); pdata->hwmon_dev = hwmon_device_register(&pdev->dev); @@ -718,7 +610,7 @@ static int __cpuinit coretemp_device_add(unsigned int cpu) mutex_lock(&pdev_list_mutex); - pdev = platform_device_alloc(DRVNAME, cpu); + pdev = platform_device_alloc(DRVNAME, TO_PHYS_ID(cpu)); if (!pdev) { err = -ENOMEM; pr_err("Device allocation failed\n"); diff --git a/drivers/hwmon/ds620.c b/drivers/hwmon/ds620.c index 257957c..4f7c3fc 100644 --- a/drivers/hwmon/ds620.c +++ b/drivers/hwmon/ds620.c @@ -72,7 +72,7 @@ struct ds620_data { char valid; /* !=0 if following fields are valid */ unsigned long last_updated; /* In jiffies */ - u16 temp[3]; /* Register values, word */ + s16 temp[3]; /* Register values, word */ }; /* diff --git a/drivers/hwmon/pmbus/pmbus_core.c b/drivers/hwmon/pmbus/pmbus_core.c index a561c3a..397fc59 100644 --- a/drivers/hwmon/pmbus/pmbus_core.c +++ b/drivers/hwmon/pmbus/pmbus_core.c @@ -978,6 +978,8 @@ static void pmbus_find_max_attr(struct i2c_client *client, struct pmbus_limit_attr { u16 reg; /* Limit register */ bool update; /* True if register needs updates */ + bool low; /* True if low limit; for limits with compare + functions only */ const char *attr; /* Attribute name */ const char *alarm; /* Alarm attribute name */ u32 sbit; /* Alarm attribute status bit */ @@ -1029,7 +1031,8 @@ static bool pmbus_add_limit_attrs(struct i2c_client *client, if (attr->compare) { pmbus_add_boolean_cmp(data, name, l->alarm, index, - cbase, cindex, + l->low ? cindex : cbase, + l->low ? cbase : cindex, attr->sbase + page, l->sbit); } else { pmbus_add_boolean_reg(data, name, @@ -1366,11 +1369,13 @@ static const struct pmbus_sensor_attr power_attributes[] = { static const struct pmbus_limit_attr temp_limit_attrs[] = { { .reg = PMBUS_UT_WARN_LIMIT, + .low = true, .attr = "min", .alarm = "min_alarm", .sbit = PB_TEMP_UT_WARNING, }, { .reg = PMBUS_UT_FAULT_LIMIT, + .low = true, .attr = "lcrit", .alarm = "lcrit_alarm", .sbit = PB_TEMP_UT_FAULT, @@ -1399,11 +1404,13 @@ static const struct pmbus_limit_attr temp_limit_attrs[] = { static const struct pmbus_limit_attr temp_limit_attrs23[] = { { .reg = PMBUS_UT_WARN_LIMIT, + .low = true, .attr = "min", .alarm = "min_alarm", .sbit = PB_TEMP_UT_WARNING, }, { .reg = PMBUS_UT_FAULT_LIMIT, + .low = true, .attr = "lcrit", .alarm = "lcrit_alarm", .sbit = PB_TEMP_UT_FAULT, diff --git a/drivers/hwmon/w83791d.c b/drivers/hwmon/w83791d.c index 17cf1ab..8c2844e 100644 --- a/drivers/hwmon/w83791d.c +++ b/drivers/hwmon/w83791d.c @@ -329,8 +329,8 @@ static int w83791d_detect(struct i2c_client *client, struct i2c_board_info *info); static int w83791d_remove(struct i2c_client *client); -static int w83791d_read(struct i2c_client *client, u8 register); -static int w83791d_write(struct i2c_client *client, u8 register, u8 value); +static int w83791d_read(struct i2c_client *client, u8 reg); +static int w83791d_write(struct i2c_client *client, u8 reg, u8 value); static struct w83791d_data *w83791d_update_device(struct device *dev); #ifdef DEBUG diff --git a/drivers/input/keyboard/adp5588-keys.c b/drivers/input/keyboard/adp5588-keys.c index 7b404e5..e34eeb8 100644 --- a/drivers/input/keyboard/adp5588-keys.c +++ b/drivers/input/keyboard/adp5588-keys.c @@ -668,4 +668,3 @@ module_exit(adp5588_exit); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Michael Hennerich <hennerich@blackfin.uclinux.org>"); MODULE_DESCRIPTION("ADP5588/87 Keypad driver"); -MODULE_ALIAS("platform:adp5588-keys"); diff --git a/drivers/input/misc/cm109.c b/drivers/input/misc/cm109.c index b09c7d1..ab86051 100644 --- a/drivers/input/misc/cm109.c +++ b/drivers/input/misc/cm109.c @@ -475,7 +475,7 @@ static void cm109_toggle_buzzer_sync(struct cm109_dev *dev, int on) le16_to_cpu(dev->ctl_req->wIndex), dev->ctl_data, USB_PKT_LEN, USB_CTRL_SET_TIMEOUT); - if (error && error != EINTR) + if (error < 0 && error != -EINTR) err("%s: usb_control_msg() failed %d", __func__, error); } diff --git a/drivers/input/mouse/bcm5974.c b/drivers/input/mouse/bcm5974.c index da28018..5ec617e 100644 --- a/drivers/input/mouse/bcm5974.c +++ b/drivers/input/mouse/bcm5974.c @@ -67,6 +67,10 @@ #define USB_DEVICE_ID_APPLE_WELLSPRING5_ANSI 0x0245 #define USB_DEVICE_ID_APPLE_WELLSPRING5_ISO 0x0246 #define USB_DEVICE_ID_APPLE_WELLSPRING5_JIS 0x0247 +/* MacbookAir4,1 (unibody, July 2011) */ +#define USB_DEVICE_ID_APPLE_WELLSPRING6A_ANSI 0x0249 +#define USB_DEVICE_ID_APPLE_WELLSPRING6A_ISO 0x024a +#define USB_DEVICE_ID_APPLE_WELLSPRING6A_JIS 0x024b /* MacbookAir4,2 (unibody, July 2011) */ #define USB_DEVICE_ID_APPLE_WELLSPRING6_ANSI 0x024c #define USB_DEVICE_ID_APPLE_WELLSPRING6_ISO 0x024d @@ -112,6 +116,10 @@ static const struct usb_device_id bcm5974_table[] = { BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING5_ANSI), BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING5_ISO), BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING5_JIS), + /* MacbookAir4,1 */ + BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING6A_ANSI), + BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING6A_ISO), + BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING6A_JIS), /* MacbookAir4,2 */ BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING6_ANSI), BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING6_ISO), @@ -334,6 +342,18 @@ static const struct bcm5974_config bcm5974_config_table[] = { { DIM_X, DIM_X / SN_COORD, -4750, 5280 }, { DIM_Y, DIM_Y / SN_COORD, -150, 6730 } }, + { + USB_DEVICE_ID_APPLE_WELLSPRING6A_ANSI, + USB_DEVICE_ID_APPLE_WELLSPRING6A_ISO, + USB_DEVICE_ID_APPLE_WELLSPRING6A_JIS, + HAS_INTEGRATED_BUTTON, + 0x84, sizeof(struct bt_data), + 0x81, TYPE2, FINGER_TYPE2, FINGER_TYPE2 + SIZEOF_ALL_FINGERS, + { DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 300 }, + { DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 }, + { DIM_X, DIM_X / SN_COORD, -4620, 5140 }, + { DIM_Y, DIM_Y / SN_COORD, -150, 6600 } + }, {} }; diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c index d27c9d9..958b4eb 100644 --- a/drivers/input/tablet/wacom_sys.c +++ b/drivers/input/tablet/wacom_sys.c @@ -229,13 +229,6 @@ static int wacom_parse_hid(struct usb_interface *intf, struct hid_descriptor *hi get_unaligned_le16(&report[i + 3]); i += 4; } - } else if (usage == WCM_DIGITIZER) { - /* max pressure isn't reported - features->pressure_max = (unsigned short) - (report[i+4] << 8 | report[i + 3]); - */ - features->pressure_max = 255; - i += 4; } break; @@ -291,13 +284,6 @@ static int wacom_parse_hid(struct usb_interface *intf, struct hid_descriptor *hi pen = 1; i++; break; - - case HID_USAGE_UNDEFINED: - if (usage == WCM_DESKTOP && finger) /* capacity */ - features->pressure_max = - get_unaligned_le16(&report[i + 3]); - i += 4; - break; } break; diff --git a/drivers/input/tablet/wacom_wac.c b/drivers/input/tablet/wacom_wac.c index c1c2f7b..0dc97ec 100644 --- a/drivers/input/tablet/wacom_wac.c +++ b/drivers/input/tablet/wacom_wac.c @@ -800,25 +800,26 @@ static int wacom_bpt_touch(struct wacom_wac *wacom) int i; for (i = 0; i < 2; i++) { - int p = data[9 * i + 2]; - bool touch = p && !wacom->shared->stylus_in_proximity; + int offset = (data[1] & 0x80) ? (8 * i) : (9 * i); + bool touch = data[offset + 3] & 0x80; - input_mt_slot(input, i); - input_mt_report_slot_state(input, MT_TOOL_FINGER, touch); /* * Touch events need to be disabled while stylus is * in proximity because user's hand is resting on touchpad * and sending unwanted events. User expects tablet buttons * to continue working though. */ + touch = touch && !wacom->shared->stylus_in_proximity; + + input_mt_slot(input, i); + input_mt_report_slot_state(input, MT_TOOL_FINGER, touch); if (touch) { - int x = get_unaligned_be16(&data[9 * i + 3]) & 0x7ff; - int y = get_unaligned_be16(&data[9 * i + 5]) & 0x7ff; + int x = get_unaligned_be16(&data[offset + 3]) & 0x7ff; + int y = get_unaligned_be16(&data[offset + 5]) & 0x7ff; if (features->quirks & WACOM_QUIRK_BBTOUCH_LOWRES) { x <<= 5; y <<= 5; } - input_report_abs(input, ABS_MT_PRESSURE, p); input_report_abs(input, ABS_MT_POSITION_X, x); input_report_abs(input, ABS_MT_POSITION_Y, y); } @@ -1056,10 +1057,11 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev, features->x_fuzz, 0); input_set_abs_params(input_dev, ABS_Y, 0, features->y_max, features->y_fuzz, 0); - input_set_abs_params(input_dev, ABS_PRESSURE, 0, features->pressure_max, - features->pressure_fuzz, 0); if (features->device_type == BTN_TOOL_PEN) { + input_set_abs_params(input_dev, ABS_PRESSURE, 0, features->pressure_max, + features->pressure_fuzz, 0); + /* penabled devices have fixed resolution for each model */ input_abs_set_res(input_dev, ABS_X, features->x_resolution); input_abs_set_res(input_dev, ABS_Y, features->y_resolution); @@ -1098,6 +1100,8 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev, __set_bit(BTN_TOOL_MOUSE, input_dev->keybit); __set_bit(BTN_STYLUS, input_dev->keybit); __set_bit(BTN_STYLUS2, input_dev->keybit); + + __set_bit(INPUT_PROP_POINTER, input_dev->propbit); break; case WACOM_21UX2: @@ -1126,6 +1130,9 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev, } input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0); + + __set_bit(INPUT_PROP_DIRECT, input_dev->propbit); + wacom_setup_cintiq(wacom_wac); break; @@ -1150,6 +1157,8 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev, /* fall through */ case INTUOS: + __set_bit(INPUT_PROP_POINTER, input_dev->propbit); + wacom_setup_intuos(wacom_wac); break; @@ -1165,6 +1174,8 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev, input_set_abs_params(input_dev, ABS_Z, -900, 899, 0, 0); wacom_setup_intuos(wacom_wac); + + __set_bit(INPUT_PROP_POINTER, input_dev->propbit); break; case TABLETPC2FG: @@ -1183,26 +1194,40 @@ void wacom_setup_input_capabilities(struct input_dev *input_dev, case TABLETPC: __clear_bit(ABS_MISC, input_dev->absbit); + __set_bit(INPUT_PROP_DIRECT, input_dev->propbit); + if (features->device_type != BTN_TOOL_PEN) break; /* no need to process stylus stuff */ /* fall through */ case PL: - case PTU: case DTU: __set_bit(BTN_TOOL_PEN, input_dev->keybit); + __set_bit(BTN_TOOL_RUBBER, input_dev->keybit); __set_bit(BTN_STYLUS, input_dev->keybit); __set_bit(BTN_STYLUS2, input_dev->keybit); + + __set_bit(INPUT_PROP_DIRECT, input_dev->propbit); + break; + + case PTU: + __set_bit(BTN_STYLUS2, input_dev->keybit); /* fall through */ case PENPARTNER: + __set_bit(BTN_TOOL_PEN, input_dev->keybit); __set_bit(BTN_TOOL_RUBBER, input_dev->keybit); + __set_bit(BTN_STYLUS, input_dev->keybit); + + __set_bit(INPUT_PROP_POINTER, input_dev->propbit); break; case BAMBOO_PT: __clear_bit(ABS_MISC, input_dev->absbit); + __set_bit(INPUT_PROP_POINTER, input_dev->propbit); + if (features->device_type == BTN_TOOL_DOUBLETAP) { __set_bit(BTN_LEFT, input_dev->keybit); __set_bit(BTN_FORWARD, input_dev->keybit); diff --git a/drivers/input/touchscreen/wacom_w8001.c b/drivers/input/touchscreen/wacom_w8001.c index c14412e..9941d39 100644 --- a/drivers/input/touchscreen/wacom_w8001.c +++ b/drivers/input/touchscreen/wacom_w8001.c @@ -383,6 +383,8 @@ static int w8001_setup(struct w8001 *w8001) dev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_ABS); strlcat(w8001->name, "Wacom Serial", sizeof(w8001->name)); + __set_bit(INPUT_PROP_DIRECT, dev->propbit); + /* penabled? */ error = w8001_command(w8001, W8001_CMD_QUERY, true); if (!error) { diff --git a/drivers/iommu/dmar.c b/drivers/iommu/dmar.c index 3dc9bef..6dcc7e2 100644 --- a/drivers/iommu/dmar.c +++ b/drivers/iommu/dmar.c @@ -1388,7 +1388,7 @@ int dmar_set_interrupt(struct intel_iommu *iommu) return ret; } - ret = request_irq(irq, dmar_fault, 0, iommu->name, iommu); + ret = request_irq(irq, dmar_fault, IRQF_NO_THREAD, iommu->name, iommu); if (ret) printk(KERN_ERR "IOMMU: can't request irq\n"); return ret; diff --git a/drivers/leds/ledtrig-timer.c b/drivers/leds/ledtrig-timer.c index d87c9d0..328c64c 100644 --- a/drivers/leds/ledtrig-timer.c +++ b/drivers/leds/ledtrig-timer.c @@ -41,6 +41,7 @@ static ssize_t led_delay_on_store(struct device *dev, if (count == size) { led_blink_set(led_cdev, &state, &led_cdev->blink_delay_off); + led_cdev->blink_delay_on = state; ret = count; } @@ -69,6 +70,7 @@ static ssize_t led_delay_off_store(struct device *dev, if (count == size) { led_blink_set(led_cdev, &led_cdev->blink_delay_on, &state); + led_cdev->blink_delay_off = state; ret = count; } diff --git a/drivers/mfd/max8997.c b/drivers/mfd/max8997.c index 5d1fca0..f83103b 100644 --- a/drivers/mfd/max8997.c +++ b/drivers/mfd/max8997.c @@ -135,10 +135,13 @@ static int max8997_i2c_probe(struct i2c_client *i2c, max8997->dev = &i2c->dev; max8997->i2c = i2c; max8997->type = id->driver_data; + max8997->irq = i2c->irq; if (!pdata) goto err; + max8997->irq_base = pdata->irq_base; + max8997->ono = pdata->ono; max8997->wakeup = pdata->wakeup; mutex_init(&max8997->iolock); @@ -152,6 +155,8 @@ static int max8997_i2c_probe(struct i2c_client *i2c, pm_runtime_set_active(max8997->dev); + max8997_irq_init(max8997); + mfd_add_devices(max8997->dev, -1, max8997_devs, ARRAY_SIZE(max8997_devs), NULL, 0); diff --git a/drivers/mfd/omap-usb-host.c b/drivers/mfd/omap-usb-host.c index 29601e7..86e1458 100644 --- a/drivers/mfd/omap-usb-host.c +++ b/drivers/mfd/omap-usb-host.c @@ -17,6 +17,7 @@ * along with this program. If not, see <http://www.gnu.org/licenses/>. */ #include <linux/kernel.h> +#include <linux/module.h> #include <linux/types.h> #include <linux/slab.h> #include <linux/delay.h> @@ -676,7 +677,6 @@ static void usbhs_omap_tll_init(struct device *dev, u8 tll_channel_count) | OMAP_TLL_CHANNEL_CONF_ULPINOBITSTUFF | OMAP_TLL_CHANNEL_CONF_ULPIDDRMODE); - reg |= (1 << (i + 1)); } else continue; diff --git a/drivers/mfd/tps65910-irq.c b/drivers/mfd/tps65910-irq.c index 2bfad5c..a56be93 100644 --- a/drivers/mfd/tps65910-irq.c +++ b/drivers/mfd/tps65910-irq.c @@ -178,8 +178,10 @@ int tps65910_irq_init(struct tps65910 *tps65910, int irq, switch (tps65910_chip_id(tps65910)) { case TPS65910: tps65910->irq_num = TPS65910_NUM_IRQ; + break; case TPS65911: tps65910->irq_num = TPS65911_NUM_IRQ; + break; } /* Register with genirq */ diff --git a/drivers/mfd/twl4030-madc.c b/drivers/mfd/twl4030-madc.c index b5d598c..7cbf2aa 100644 --- a/drivers/mfd/twl4030-madc.c +++ b/drivers/mfd/twl4030-madc.c @@ -510,8 +510,9 @@ int twl4030_madc_conversion(struct twl4030_madc_request *req) u8 ch_msb, ch_lsb; int ret; - if (!req) + if (!req || !twl4030_madc) return -EINVAL; + mutex_lock(&twl4030_madc->lock); if (req->method < TWL4030_MADC_RT || req->method > TWL4030_MADC_SW2) { ret = -EINVAL; @@ -706,6 +707,8 @@ static int __devinit twl4030_madc_probe(struct platform_device *pdev) if (!madc) return -ENOMEM; + madc->dev = &pdev->dev; + /* * Phoenix provides 2 interrupt lines. The first one is connected to * the OMAP. The other one can be connected to the other processor such diff --git a/drivers/mfd/wm8350-gpio.c b/drivers/mfd/wm8350-gpio.c index ebf99be..d584f6b 100644 --- a/drivers/mfd/wm8350-gpio.c +++ b/drivers/mfd/wm8350-gpio.c @@ -37,7 +37,7 @@ static int gpio_set_dir(struct wm8350 *wm8350, int gpio, int dir) return ret; } -static int gpio_set_debounce(struct wm8350 *wm8350, int gpio, int db) +static int wm8350_gpio_set_debounce(struct wm8350 *wm8350, int gpio, int db) { if (db == WM8350_GPIO_DEBOUNCE_ON) return wm8350_set_bits(wm8350, WM8350_GPIO_DEBOUNCE, @@ -210,7 +210,7 @@ int wm8350_gpio_config(struct wm8350 *wm8350, int gpio, int dir, int func, goto err; if (gpio_set_polarity(wm8350, gpio, pol)) goto err; - if (gpio_set_debounce(wm8350, gpio, debounce)) + if (wm8350_gpio_set_debounce(wm8350, gpio, debounce)) goto err; if (gpio_set_dir(wm8350, gpio, dir)) goto err; diff --git a/drivers/misc/pti.c b/drivers/misc/pti.c index 06df187..0b56e3f 100644 --- a/drivers/misc/pti.c +++ b/drivers/misc/pti.c @@ -165,6 +165,11 @@ static void pti_write_to_aperture(struct pti_masterchannel *mc, static void pti_control_frame_built_and_sent(struct pti_masterchannel *mc, const char *thread_name) { + /* + * Since we access the comm member in current's task_struct, we only + * need to be as large as what 'comm' in that structure is. + */ + char comm[TASK_COMM_LEN]; struct pti_masterchannel mccontrol = {.master = CONTROL_ID, .channel = 0}; const char *thread_name_p; @@ -172,13 +177,6 @@ static void pti_control_frame_built_and_sent(struct pti_masterchannel *mc, u8 control_frame[CONTROL_FRAME_LEN]; if (!thread_name) { - /* - * Since we access the comm member in current's task_struct, - * we only need to be as large as what 'comm' in that - * structure is. - */ - char comm[TASK_COMM_LEN]; - if (!in_interrupt()) get_task_comm(comm, current); else diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c index 1ff5486..4c1a648 100644 --- a/drivers/mmc/card/block.c +++ b/drivers/mmc/card/block.c @@ -926,6 +926,9 @@ static void mmc_blk_rw_rq_prep(struct mmc_queue_req *mqrq, /* * Reliable writes are used to implement Forced Unit Access and * REQ_META accesses, and are supported only on MMCs. + * + * XXX: this really needs a good explanation of why REQ_META + * is treated special. */ bool do_rel_wr = ((req->cmd_flags & REQ_FUA) || (req->cmd_flags & REQ_META)) && diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c index a04f87d..03cfdab 100644 --- a/drivers/mmc/host/s3cmci.c +++ b/drivers/mmc/host/s3cmci.c @@ -913,9 +913,9 @@ request_done: } static void s3cmci_dma_setup(struct s3cmci_host *host, - enum s3c2410_dmasrc source) + enum dma_data_direction source) { - static enum s3c2410_dmasrc last_source = -1; + static enum dma_data_direction last_source = -1; static int setup_ok; if (last_source == source) @@ -1087,7 +1087,7 @@ static int s3cmci_prepare_dma(struct s3cmci_host *host, struct mmc_data *data) BUG_ON((data->flags & BOTH_DIR) == BOTH_DIR); - s3cmci_dma_setup(host, rw ? S3C2410_DMASRC_MEM : S3C2410_DMASRC_HW); + s3cmci_dma_setup(host, rw ? DMA_TO_DEVICE : DMA_FROM_DEVICE); s3c2410_dma_ctrl(host->dma, S3C2410_DMAOP_FLUSH); dma_len = dma_map_sg(mmc_dev(host->mmc), data->sg, data->sg_len, diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 8d0314d..a44874e 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -2535,7 +2535,7 @@ config S6GMAC source "drivers/net/stmmac/Kconfig" config PCH_GBE - tristate "Intel EG20T PCH / OKI SEMICONDUCTOR ML7223 IOH GbE" + tristate "Intel EG20T PCH/OKI SEMICONDUCTOR IOH(ML7223/ML7831) GbE" depends on PCI select MII ---help--- @@ -2548,10 +2548,11 @@ config PCH_GBE This driver enables Gigabit Ethernet function. This driver also can be used for OKI SEMICONDUCTOR IOH(Input/ - Output Hub), ML7223. - ML7223 IOH is for MP(Media Phone) use. - ML7223 is companion chip for Intel Atom E6xx series. - ML7223 is completely compatible for Intel EG20T PCH. + Output Hub), ML7223/ML7831. + ML7223 IOH is for MP(Media Phone) use. ML7831 IOH is for general + purpose use. + ML7223/ML7831 is companion chip for Intel Atom E6xx series. + ML7223/ML7831 is completely compatible for Intel EG20T PCH. config FTGMAC100 tristate "Faraday FTGMAC100 Gigabit Ethernet support" diff --git a/drivers/net/bnx2x/bnx2x.h b/drivers/net/bnx2x/bnx2x.h index c423504..e46df53 100644 --- a/drivers/net/bnx2x/bnx2x.h +++ b/drivers/net/bnx2x/bnx2x.h @@ -315,6 +315,14 @@ union db_prod { u32 raw; }; +/* dropless fc FW/HW related params */ +#define BRB_SIZE(bp) (CHIP_IS_E3(bp) ? 1024 : 512) +#define MAX_AGG_QS(bp) (CHIP_IS_E1(bp) ? \ + ETH_MAX_AGGREGATION_QUEUES_E1 :\ + ETH_MAX_AGGREGATION_QUEUES_E1H_E2) +#define FW_DROP_LEVEL(bp) (3 + MAX_SPQ_PENDING + MAX_AGG_QS(bp)) +#define FW_PREFETCH_CNT 16 +#define DROPLESS_FC_HEADROOM 100 /* MC hsi */ #define BCM_PAGE_SHIFT 12 @@ -331,15 +339,35 @@ union db_prod { /* SGE ring related macros */ #define NUM_RX_SGE_PAGES 2 #define RX_SGE_CNT (BCM_PAGE_SIZE / sizeof(struct eth_rx_sge)) -#define MAX_RX_SGE_CNT (RX_SGE_CNT - 2) +#define NEXT_PAGE_SGE_DESC_CNT 2 +#define MAX_RX_SGE_CNT (RX_SGE_CNT - NEXT_PAGE_SGE_DESC_CNT) /* RX_SGE_CNT is promised to be a power of 2 */ #define RX_SGE_MASK (RX_SGE_CNT - 1) #define NUM_RX_SGE (RX_SGE_CNT * NUM_RX_SGE_PAGES) #define MAX_RX_SGE (NUM_RX_SGE - 1) #define NEXT_SGE_IDX(x) ((((x) & RX_SGE_MASK) == \ - (MAX_RX_SGE_CNT - 1)) ? (x) + 3 : (x) + 1) + (MAX_RX_SGE_CNT - 1)) ? \ + (x) + 1 + NEXT_PAGE_SGE_DESC_CNT : \ + (x) + 1) #define RX_SGE(x) ((x) & MAX_RX_SGE) +/* + * Number of required SGEs is the sum of two: + * 1. Number of possible opened aggregations (next packet for + * these aggregations will probably consume SGE immidiatelly) + * 2. Rest of BRB blocks divided by 2 (block will consume new SGE only + * after placement on BD for new TPA aggregation) + * + * Takes into account NEXT_PAGE_SGE_DESC_CNT "next" elements on each page + */ +#define NUM_SGE_REQ (MAX_AGG_QS(bp) + \ + (BRB_SIZE(bp) - MAX_AGG_QS(bp)) / 2) +#define NUM_SGE_PG_REQ ((NUM_SGE_REQ + MAX_RX_SGE_CNT - 1) / \ + MAX_RX_SGE_CNT) +#define SGE_TH_LO(bp) (NUM_SGE_REQ + \ + NUM_SGE_PG_REQ * NEXT_PAGE_SGE_DESC_CNT) +#define SGE_TH_HI(bp) (SGE_TH_LO(bp) + DROPLESS_FC_HEADROOM) + /* Manipulate a bit vector defined as an array of u64 */ /* Number of bits in one sge_mask array element */ @@ -551,24 +579,43 @@ struct bnx2x_fastpath { #define NUM_TX_RINGS 16 #define TX_DESC_CNT (BCM_PAGE_SIZE / sizeof(union eth_tx_bd_types)) -#define MAX_TX_DESC_CNT (TX_DESC_CNT - 1) +#define NEXT_PAGE_TX_DESC_CNT 1 +#define MAX_TX_DESC_CNT (TX_DESC_CNT - NEXT_PAGE_TX_DESC_CNT) #define NUM_TX_BD (TX_DESC_CNT * NUM_TX_RINGS) #define MAX_TX_BD (NUM_TX_BD - 1) #define MAX_TX_AVAIL (MAX_TX_DESC_CNT * NUM_TX_RINGS - 2) #define NEXT_TX_IDX(x) ((((x) & MAX_TX_DESC_CNT) == \ - (MAX_TX_DESC_CNT - 1)) ? (x) + 2 : (x) + 1) + (MAX_TX_DESC_CNT - 1)) ? \ + (x) + 1 + NEXT_PAGE_TX_DESC_CNT : \ + (x) + 1) #define TX_BD(x) ((x) & MAX_TX_BD) #define TX_BD_POFF(x) ((x) & MAX_TX_DESC_CNT) /* The RX BD ring is special, each bd is 8 bytes but the last one is 16 */ #define NUM_RX_RINGS 8 #define RX_DESC_CNT (BCM_PAGE_SIZE / sizeof(struct eth_rx_bd)) -#define MAX_RX_DESC_CNT (RX_DESC_CNT - 2) +#define NEXT_PAGE_RX_DESC_CNT 2 +#define MAX_RX_DESC_CNT (RX_DESC_CNT - NEXT_PAGE_RX_DESC_CNT) #define RX_DESC_MASK (RX_DESC_CNT - 1) #define NUM_RX_BD (RX_DESC_CNT * NUM_RX_RINGS) #define MAX_RX_BD (NUM_RX_BD - 1) #define MAX_RX_AVAIL (MAX_RX_DESC_CNT * NUM_RX_RINGS - 2) -#define MIN_RX_AVAIL 128 + +/* dropless fc calculations for BDs + * + * Number of BDs should as number of buffers in BRB: + * Low threshold takes into account NEXT_PAGE_RX_DESC_CNT + * "next" elements on each page + */ +#define NUM_BD_REQ BRB_SIZE(bp) +#define NUM_BD_PG_REQ ((NUM_BD_REQ + MAX_RX_DESC_CNT - 1) / \ + MAX_RX_DESC_CNT) +#define BD_TH_LO(bp) (NUM_BD_REQ + \ + NUM_BD_PG_REQ * NEXT_PAGE_RX_DESC_CNT + \ + FW_DROP_LEVEL(bp)) +#define BD_TH_HI(bp) (BD_TH_LO(bp) + DROPLESS_FC_HEADROOM) + +#define MIN_RX_AVAIL ((bp)->dropless_fc ? BD_TH_HI(bp) + 128 : 128) #define MIN_RX_SIZE_TPA_HW (CHIP_IS_E1(bp) ? \ ETH_MIN_RX_CQES_WITH_TPA_E1 : \ @@ -579,7 +626,9 @@ struct bnx2x_fastpath { MIN_RX_AVAIL)) #define NEXT_RX_IDX(x) ((((x) & RX_DESC_MASK) == \ - (MAX_RX_DESC_CNT - 1)) ? (x) + 3 : (x) + 1) + (MAX_RX_DESC_CNT - 1)) ? \ + (x) + 1 + NEXT_PAGE_RX_DESC_CNT : \ + (x) + 1) #define RX_BD(x) ((x) & MAX_RX_BD) /* @@ -589,14 +638,31 @@ struct bnx2x_fastpath { #define CQE_BD_REL (sizeof(union eth_rx_cqe) / sizeof(struct eth_rx_bd)) #define NUM_RCQ_RINGS (NUM_RX_RINGS * CQE_BD_REL) #define RCQ_DESC_CNT (BCM_PAGE_SIZE / sizeof(union eth_rx_cqe)) -#define MAX_RCQ_DESC_CNT (RCQ_DESC_CNT - 1) +#define NEXT_PAGE_RCQ_DESC_CNT 1 +#define MAX_RCQ_DESC_CNT (RCQ_DESC_CNT - NEXT_PAGE_RCQ_DESC_CNT) #define NUM_RCQ_BD (RCQ_DESC_CNT * NUM_RCQ_RINGS) #define MAX_RCQ_BD (NUM_RCQ_BD - 1) #define MAX_RCQ_AVAIL (MAX_RCQ_DESC_CNT * NUM_RCQ_RINGS - 2) #define NEXT_RCQ_IDX(x) ((((x) & MAX_RCQ_DESC_CNT) == \ - (MAX_RCQ_DESC_CNT - 1)) ? (x) + 2 : (x) + 1) + (MAX_RCQ_DESC_CNT - 1)) ? \ + (x) + 1 + NEXT_PAGE_RCQ_DESC_CNT : \ + (x) + 1) #define RCQ_BD(x) ((x) & MAX_RCQ_BD) +/* dropless fc calculations for RCQs + * + * Number of RCQs should be as number of buffers in BRB: + * Low threshold takes into account NEXT_PAGE_RCQ_DESC_CNT + * "next" elements on each page + */ +#define NUM_RCQ_REQ BRB_SIZE(bp) +#define NUM_RCQ_PG_REQ ((NUM_BD_REQ + MAX_RCQ_DESC_CNT - 1) / \ + MAX_RCQ_DESC_CNT) +#define RCQ_TH_LO(bp) (NUM_RCQ_REQ + \ + NUM_RCQ_PG_REQ * NEXT_PAGE_RCQ_DESC_CNT + \ + FW_DROP_LEVEL(bp)) +#define RCQ_TH_HI(bp) (RCQ_TH_LO(bp) + DROPLESS_FC_HEADROOM) + /* This is needed for determining of last_max */ #define SUB_S16(a, b) (s16)((s16)(a) - (s16)(b)) @@ -685,24 +751,17 @@ struct bnx2x_fastpath { #define FP_CSB_FUNC_OFF \ offsetof(struct cstorm_status_block_c, func) -#define HC_INDEX_TOE_RX_CQ_CONS 0 /* Formerly Ustorm TOE CQ index */ - /* (HC_INDEX_U_TOE_RX_CQ_CONS) */ -#define HC_INDEX_ETH_RX_CQ_CONS 1 /* Formerly Ustorm ETH CQ index */ - /* (HC_INDEX_U_ETH_RX_CQ_CONS) */ -#define HC_INDEX_ETH_RX_BD_CONS 2 /* Formerly Ustorm ETH BD index */ - /* (HC_INDEX_U_ETH_RX_BD_CONS) */ - -#define HC_INDEX_TOE_TX_CQ_CONS 4 /* Formerly Cstorm TOE CQ index */ - /* (HC_INDEX_C_TOE_TX_CQ_CONS) */ -#define HC_INDEX_ETH_TX_CQ_CONS_COS0 5 /* Formerly Cstorm ETH CQ index */ - /* (HC_INDEX_C_ETH_TX_CQ_CONS) */ -#define HC_INDEX_ETH_TX_CQ_CONS_COS1 6 /* Formerly Cstorm ETH CQ index */ - /* (HC_INDEX_C_ETH_TX_CQ_CONS) */ -#define HC_INDEX_ETH_TX_CQ_CONS_COS2 7 /* Formerly Cstorm ETH CQ index */ - /* (HC_INDEX_C_ETH_TX_CQ_CONS) */ +#define HC_INDEX_ETH_RX_CQ_CONS 1 -#define HC_INDEX_ETH_FIRST_TX_CQ_CONS HC_INDEX_ETH_TX_CQ_CONS_COS0 +#define HC_INDEX_OOO_TX_CQ_CONS 4 +#define HC_INDEX_ETH_TX_CQ_CONS_COS0 5 + +#define HC_INDEX_ETH_TX_CQ_CONS_COS1 6 + +#define HC_INDEX_ETH_TX_CQ_CONS_COS2 7 + +#define HC_INDEX_ETH_FIRST_TX_CQ_CONS HC_INDEX_ETH_TX_CQ_CONS_COS0 #define BNX2X_RX_SB_INDEX \ (&fp->sb_index_values[HC_INDEX_ETH_RX_CQ_CONS]) @@ -1100,11 +1159,12 @@ struct bnx2x { #define BP_PORT(bp) (bp->pfid & 1) #define BP_FUNC(bp) (bp->pfid) #define BP_ABS_FUNC(bp) (bp->pf_num) -#define BP_E1HVN(bp) (bp->pfid >> 1) -#define BP_VN(bp) (BP_E1HVN(bp)) /*remove when approved*/ -#define BP_L_ID(bp) (BP_E1HVN(bp) << 2) -#define BP_FW_MB_IDX(bp) (BP_PORT(bp) +\ - BP_VN(bp) * ((CHIP_IS_E1x(bp) || (CHIP_MODE_IS_4_PORT(bp))) ? 2 : 1)) +#define BP_VN(bp) ((bp)->pfid >> 1) +#define BP_MAX_VN_NUM(bp) (CHIP_MODE_IS_4_PORT(bp) ? 2 : 4) +#define BP_L_ID(bp) (BP_VN(bp) << 2) +#define BP_FW_MB_IDX_VN(bp, vn) (BP_PORT(bp) +\ + (vn) * ((CHIP_IS_E1x(bp) || (CHIP_MODE_IS_4_PORT(bp))) ? 2 : 1)) +#define BP_FW_MB_IDX(bp) BP_FW_MB_IDX_VN(bp, BP_VN(bp)) struct net_device *dev; struct pci_dev *pdev; @@ -1767,7 +1827,7 @@ static inline u32 reg_poll(struct bnx2x *bp, u32 reg, u32 expected, int ms, #define MAX_DMAE_C_PER_PORT 8 #define INIT_DMAE_C(bp) (BP_PORT(bp) * MAX_DMAE_C_PER_PORT + \ - BP_E1HVN(bp)) + BP_VN(bp)) #define PMF_DMAE_C(bp) (BP_PORT(bp) * MAX_DMAE_C_PER_PORT + \ E1HVN_MAX) @@ -1793,7 +1853,7 @@ static inline u32 reg_poll(struct bnx2x *bp, u32 reg, u32 expected, int ms, /* must be used on a CID before placing it on a HW ring */ #define HW_CID(bp, x) ((BP_PORT(bp) << 23) | \ - (BP_E1HVN(bp) << BNX2X_SWCID_SHIFT) | \ + (BP_VN(bp) << BNX2X_SWCID_SHIFT) | \ (x)) #define SP_DESC_CNT (BCM_PAGE_SIZE / sizeof(struct eth_spe)) diff --git a/drivers/net/bnx2x/bnx2x_cmn.c b/drivers/net/bnx2x/bnx2x_cmn.c index 37e5790..c4cbf97 100644 --- a/drivers/net/bnx2x/bnx2x_cmn.c +++ b/drivers/net/bnx2x/bnx2x_cmn.c @@ -987,8 +987,6 @@ void __bnx2x_link_report(struct bnx2x *bp) void bnx2x_init_rx_rings(struct bnx2x *bp) { int func = BP_FUNC(bp); - int max_agg_queues = CHIP_IS_E1(bp) ? ETH_MAX_AGGREGATION_QUEUES_E1 : - ETH_MAX_AGGREGATION_QUEUES_E1H_E2; u16 ring_prod; int i, j; @@ -1001,7 +999,7 @@ void bnx2x_init_rx_rings(struct bnx2x *bp) if (!fp->disable_tpa) { /* Fill the per-aggregtion pool */ - for (i = 0; i < max_agg_queues; i++) { + for (i = 0; i < MAX_AGG_QS(bp); i++) { struct bnx2x_agg_info *tpa_info = &fp->tpa_info[i]; struct sw_rx_bd *first_buf = @@ -1041,7 +1039,7 @@ void bnx2x_init_rx_rings(struct bnx2x *bp) bnx2x_free_rx_sge_range(bp, fp, ring_prod); bnx2x_free_tpa_pool(bp, fp, - max_agg_queues); + MAX_AGG_QS(bp)); fp->disable_tpa = 1; ring_prod = 0; break; @@ -1137,9 +1135,7 @@ static void bnx2x_free_rx_skbs(struct bnx2x *bp) bnx2x_free_rx_bds(fp); if (!fp->disable_tpa) - bnx2x_free_tpa_pool(bp, fp, CHIP_IS_E1(bp) ? - ETH_MAX_AGGREGATION_QUEUES_E1 : - ETH_MAX_AGGREGATION_QUEUES_E1H_E2); + bnx2x_free_tpa_pool(bp, fp, MAX_AGG_QS(bp)); } } @@ -3095,15 +3091,20 @@ static int bnx2x_alloc_fp_mem_at(struct bnx2x *bp, int index) struct bnx2x_fastpath *fp = &bp->fp[index]; int ring_size = 0; u8 cos; + int rx_ring_size = 0; /* if rx_ring_size specified - use it */ - int rx_ring_size = bp->rx_ring_size ? bp->rx_ring_size : - MAX_RX_AVAIL/BNX2X_NUM_RX_QUEUES(bp); + if (!bp->rx_ring_size) { - /* allocate at least number of buffers required by FW */ - rx_ring_size = max_t(int, bp->disable_tpa ? MIN_RX_SIZE_NONTPA : - MIN_RX_SIZE_TPA, - rx_ring_size); + rx_ring_size = MAX_RX_AVAIL/BNX2X_NUM_RX_QUEUES(bp); + + /* allocate at least number of buffers required by FW */ + rx_ring_size = max_t(int, bp->disable_tpa ? MIN_RX_SIZE_NONTPA : + MIN_RX_SIZE_TPA, rx_ring_size); + + bp->rx_ring_size = rx_ring_size; + } else + rx_ring_size = bp->rx_ring_size; /* Common */ sb = &bnx2x_fp(bp, index, status_blk); diff --git a/drivers/net/bnx2x/bnx2x_ethtool.c b/drivers/net/bnx2x/bnx2x_ethtool.c index 2218630..cf3e479 100644 --- a/drivers/net/bnx2x/bnx2x_ethtool.c +++ b/drivers/net/bnx2x/bnx2x_ethtool.c @@ -363,13 +363,50 @@ static int bnx2x_set_settings(struct net_device *dev, struct ethtool_cmd *cmd) } /* advertise the requested speed and duplex if supported */ - cmd->advertising &= bp->port.supported[cfg_idx]; + if (cmd->advertising & ~(bp->port.supported[cfg_idx])) { + DP(NETIF_MSG_LINK, "Advertisement parameters " + "are not supported\n"); + return -EINVAL; + } bp->link_params.req_line_speed[cfg_idx] = SPEED_AUTO_NEG; - bp->link_params.req_duplex[cfg_idx] = DUPLEX_FULL; - bp->port.advertising[cfg_idx] |= (ADVERTISED_Autoneg | + bp->link_params.req_duplex[cfg_idx] = cmd->duplex; + bp->port.advertising[cfg_idx] = (ADVERTISED_Autoneg | cmd->advertising); + if (cmd->advertising) { + + bp->link_params.speed_cap_mask[cfg_idx] = 0; + if (cmd->advertising & ADVERTISED_10baseT_Half) { + bp->link_params.speed_cap_mask[cfg_idx] |= + PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_HALF; + } + if (cmd->advertising & ADVERTISED_10baseT_Full) + bp->link_params.speed_cap_mask[cfg_idx] |= + PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL; + if (cmd->advertising & ADVERTISED_100baseT_Full) + bp->link_params.speed_cap_mask[cfg_idx] |= + PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_FULL; + + if (cmd->advertising & ADVERTISED_100baseT_Half) { + bp->link_params.speed_cap_mask[cfg_idx] |= + PORT_HW_CFG_SPEED_CAPABILITY_D0_100M_HALF; + } + if (cmd->advertising & ADVERTISED_1000baseT_Half) { + bp->link_params.speed_cap_mask[cfg_idx] |= + PORT_HW_CFG_SPEED_CAPABILITY_D0_1G; + } + if (cmd->advertising & (ADVERTISED_1000baseT_Full | + ADVERTISED_1000baseKX_Full)) + bp->link_params.speed_cap_mask[cfg_idx] |= + PORT_HW_CFG_SPEED_CAPABILITY_D0_1G; + + if (cmd->advertising & (ADVERTISED_10000baseT_Full | + ADVERTISED_10000baseKX4_Full | + ADVERTISED_10000baseKR_Full)) + bp->link_params.speed_cap_mask[cfg_idx] |= + PORT_HW_CFG_SPEED_CAPABILITY_D0_10G; + } } else { /* forced speed */ /* advertise the requested speed and duplex if supported */ switch (speed) { @@ -1310,10 +1347,7 @@ static void bnx2x_get_ringparam(struct net_device *dev, if (bp->rx_ring_size) ering->rx_pending = bp->rx_ring_size; else - if (bp->state == BNX2X_STATE_OPEN && bp->num_queues) - ering->rx_pending = MAX_RX_AVAIL/bp->num_queues; - else - ering->rx_pending = MAX_RX_AVAIL; + ering->rx_pending = MAX_RX_AVAIL; ering->rx_mini_pending = 0; ering->rx_jumbo_pending = 0; diff --git a/drivers/net/bnx2x/bnx2x_link.c b/drivers/net/bnx2x/bnx2x_link.c index d45b155..ba15bdc 100644 --- a/drivers/net/bnx2x/bnx2x_link.c +++ b/drivers/net/bnx2x/bnx2x_link.c @@ -778,9 +778,9 @@ static int bnx2x_ets_e3b0_set_cos_bw(struct bnx2x *bp, { u32 nig_reg_adress_crd_weight = 0; u32 pbf_reg_adress_crd_weight = 0; - /* Calculate and set BW for this COS*/ - const u32 cos_bw_nig = (bw * min_w_val_nig) / total_bw; - const u32 cos_bw_pbf = (bw * min_w_val_pbf) / total_bw; + /* Calculate and set BW for this COS - use 1 instead of 0 for BW */ + const u32 cos_bw_nig = ((bw ? bw : 1) * min_w_val_nig) / total_bw; + const u32 cos_bw_pbf = ((bw ? bw : 1) * min_w_val_pbf) / total_bw; switch (cos_entry) { case 0: @@ -852,18 +852,12 @@ static int bnx2x_ets_e3b0_get_total_bw( /* Calculate total BW requested */ for (cos_idx = 0; cos_idx < ets_params->num_of_cos; cos_idx++) { if (bnx2x_cos_state_bw == ets_params->cos[cos_idx].state) { - - if (0 == ets_params->cos[cos_idx].params.bw_params.bw) { - DP(NETIF_MSG_LINK, "bnx2x_ets_E3B0_config BW" - "was set to 0\n"); - return -EINVAL; + *total_bw += + ets_params->cos[cos_idx].params.bw_params.bw; } - *total_bw += - ets_params->cos[cos_idx].params.bw_params.bw; - } } - /*Check taotl BW is valid */ + /* Check total BW is valid */ if ((100 != *total_bw) || (0 == *total_bw)) { if (0 == *total_bw) { DP(NETIF_MSG_LINK, "bnx2x_ets_E3B0_config toatl BW" @@ -1726,7 +1720,7 @@ static int bnx2x_xmac_enable(struct link_params *params, /* Check loopback mode */ if (lb) - val |= XMAC_CTRL_REG_CORE_LOCAL_LPBK; + val |= XMAC_CTRL_REG_LINE_LOCAL_LPBK; REG_WR(bp, xmac_base + XMAC_REG_CTRL, val); bnx2x_set_xumac_nig(params, ((vars->flow_ctrl & BNX2X_FLOW_CTRL_TX) != 0), 1); @@ -3630,6 +3624,12 @@ static void bnx2x_warpcore_enable_AN_KR(struct bnx2x_phy *phy, bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, MDIO_WC_REG_AN_IEEE1BLK_AN_ADVERTISEMENT1, val16); + /* Advertised and set FEC (Forward Error Correction) */ + bnx2x_cl45_write(bp, phy, MDIO_AN_DEVAD, + MDIO_WC_REG_AN_IEEE1BLK_AN_ADVERTISEMENT2, + (MDIO_WC_REG_AN_IEEE1BLK_AN_ADV2_FEC_ABILITY | + MDIO_WC_REG_AN_IEEE1BLK_AN_ADV2_FEC_REQ)); + /* Enable CL37 BAM */ if (REG_RD(bp, params->shmem_base + offsetof(struct shmem_region, dev_info. @@ -5924,7 +5924,7 @@ int bnx2x_set_led(struct link_params *params, (tmp | EMAC_LED_OVERRIDE)); /* * return here without enabling traffic - * LED blink andsetting rate in ON mode. + * LED blink and setting rate in ON mode. * In oper mode, enabling LED blink * and setting rate is needed. */ @@ -5936,7 +5936,11 @@ int bnx2x_set_led(struct link_params *params, * This is a work-around for HW issue found when link * is up in CL73 */ - REG_WR(bp, NIG_REG_LED_10G_P0 + port*4, 1); + if ((!CHIP_IS_E3(bp)) || + (CHIP_IS_E3(bp) && + mode == LED_MODE_ON)) + REG_WR(bp, NIG_REG_LED_10G_P0 + port*4, 1); + if (CHIP_IS_E1x(bp) || CHIP_IS_E2(bp) || (mode == LED_MODE_ON)) @@ -10638,8 +10642,7 @@ static struct bnx2x_phy phy_warpcore = { .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_DIRECT, .addr = 0xff, .def_md_devad = 0, - .flags = (FLAGS_HW_LOCK_REQUIRED | - FLAGS_TX_ERROR_CHECK), + .flags = FLAGS_HW_LOCK_REQUIRED, .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, .mdio_ctrl = 0, @@ -10765,8 +10768,7 @@ static struct bnx2x_phy phy_8706 = { .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8706, .addr = 0xff, .def_md_devad = 0, - .flags = (FLAGS_INIT_XGXS_FIRST | - FLAGS_TX_ERROR_CHECK), + .flags = FLAGS_INIT_XGXS_FIRST, .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, .mdio_ctrl = 0, @@ -10797,8 +10799,7 @@ static struct bnx2x_phy phy_8726 = { .addr = 0xff, .def_md_devad = 0, .flags = (FLAGS_HW_LOCK_REQUIRED | - FLAGS_INIT_XGXS_FIRST | - FLAGS_TX_ERROR_CHECK), + FLAGS_INIT_XGXS_FIRST), .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, .mdio_ctrl = 0, @@ -10829,8 +10830,7 @@ static struct bnx2x_phy phy_8727 = { .type = PORT_HW_CFG_XGXS_EXT_PHY_TYPE_BCM8727, .addr = 0xff, .def_md_devad = 0, - .flags = (FLAGS_FAN_FAILURE_DET_REQ | - FLAGS_TX_ERROR_CHECK), + .flags = FLAGS_FAN_FAILURE_DET_REQ, .rx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, .tx_preemphasis = {0xffff, 0xffff, 0xffff, 0xffff}, .mdio_ctrl = 0, diff --git a/drivers/net/bnx2x/bnx2x_main.c b/drivers/net/bnx2x/bnx2x_main.c index f74582a..c027e93 100644 --- a/drivers/net/bnx2x/bnx2x_main.c +++ b/drivers/net/bnx2x/bnx2x_main.c @@ -407,8 +407,8 @@ u32 bnx2x_dmae_opcode(struct bnx2x *bp, u8 src_type, u8 dst_type, opcode |= (DMAE_CMD_SRC_RESET | DMAE_CMD_DST_RESET); opcode |= (BP_PORT(bp) ? DMAE_CMD_PORT_1 : DMAE_CMD_PORT_0); - opcode |= ((BP_E1HVN(bp) << DMAE_CMD_E1HVN_SHIFT) | - (BP_E1HVN(bp) << DMAE_COMMAND_DST_VN_SHIFT)); + opcode |= ((BP_VN(bp) << DMAE_CMD_E1HVN_SHIFT) | + (BP_VN(bp) << DMAE_COMMAND_DST_VN_SHIFT)); opcode |= (DMAE_COM_SET_ERR << DMAE_COMMAND_ERR_POLICY_SHIFT); #ifdef __BIG_ENDIAN @@ -1419,7 +1419,7 @@ static void bnx2x_hc_int_enable(struct bnx2x *bp) if (!CHIP_IS_E1(bp)) { /* init leading/trailing edge */ if (IS_MF(bp)) { - val = (0xee0f | (1 << (BP_E1HVN(bp) + 4))); + val = (0xee0f | (1 << (BP_VN(bp) + 4))); if (bp->port.pmf) /* enable nig and gpio3 attention */ val |= 0x1100; @@ -1471,7 +1471,7 @@ static void bnx2x_igu_int_enable(struct bnx2x *bp) /* init leading/trailing edge */ if (IS_MF(bp)) { - val = (0xee0f | (1 << (BP_E1HVN(bp) + 4))); + val = (0xee0f | (1 << (BP_VN(bp) + 4))); if (bp->port.pmf) /* enable nig and gpio3 attention */ val |= 0x1100; @@ -2287,7 +2287,7 @@ static void bnx2x_calc_vn_weight_sum(struct bnx2x *bp) int vn; bp->vn_weight_sum = 0; - for (vn = VN_0; vn < E1HVN_MAX; vn++) { + for (vn = VN_0; vn < BP_MAX_VN_NUM(bp); vn++) { u32 vn_cfg = bp->mf_config[vn]; u32 vn_min_rate = ((vn_cfg & FUNC_MF_CFG_MIN_BW_MASK) >> FUNC_MF_CFG_MIN_BW_SHIFT) * 100; @@ -2320,12 +2320,18 @@ static void bnx2x_calc_vn_weight_sum(struct bnx2x *bp) CMNG_FLAGS_PER_PORT_FAIRNESS_VN; } +/* returns func by VN for current port */ +static inline int func_by_vn(struct bnx2x *bp, int vn) +{ + return 2 * vn + BP_PORT(bp); +} + static void bnx2x_init_vn_minmax(struct bnx2x *bp, int vn) { struct rate_shaping_vars_per_vn m_rs_vn; struct fairness_vars_per_vn m_fair_vn; u32 vn_cfg = bp->mf_config[vn]; - int func = 2*vn + BP_PORT(bp); + int func = func_by_vn(bp, vn); u16 vn_min_rate, vn_max_rate; int i; @@ -2422,7 +2428,7 @@ void bnx2x_read_mf_cfg(struct bnx2x *bp) * * and there are 2 functions per port */ - for (vn = VN_0; vn < E1HVN_MAX; vn++) { + for (vn = VN_0; vn < BP_MAX_VN_NUM(bp); vn++) { int /*abs*/func = n * (2 * vn + BP_PORT(bp)) + BP_PATH(bp); if (func >= E1H_FUNC_MAX) @@ -2454,7 +2460,7 @@ static void bnx2x_cmng_fns_init(struct bnx2x *bp, u8 read_cfg, u8 cmng_type) /* calculate and set min-max rate for each vn */ if (bp->port.pmf) - for (vn = VN_0; vn < E1HVN_MAX; vn++) + for (vn = VN_0; vn < BP_MAX_VN_NUM(bp); vn++) bnx2x_init_vn_minmax(bp, vn); /* always enable rate shaping and fairness */ @@ -2473,16 +2479,15 @@ static void bnx2x_cmng_fns_init(struct bnx2x *bp, u8 read_cfg, u8 cmng_type) static inline void bnx2x_link_sync_notify(struct bnx2x *bp) { - int port = BP_PORT(bp); int func; int vn; /* Set the attention towards other drivers on the same port */ - for (vn = VN_0; vn < E1HVN_MAX; vn++) { - if (vn == BP_E1HVN(bp)) + for (vn = VN_0; vn < BP_MAX_VN_NUM(bp); vn++) { + if (vn == BP_VN(bp)) continue; - func = ((vn << 1) | port); + func = func_by_vn(bp, vn); REG_WR(bp, MISC_REG_AEU_GENERAL_ATTN_0 + (LINK_SYNC_ATTENTION_BIT_FUNC_0 + func)*4, 1); } @@ -2577,7 +2582,7 @@ static void bnx2x_pmf_update(struct bnx2x *bp) bnx2x_dcbx_pmf_update(bp); /* enable nig attention */ - val = (0xff0f | (1 << (BP_E1HVN(bp) + 4))); + val = (0xff0f | (1 << (BP_VN(bp) + 4))); if (bp->common.int_block == INT_BLOCK_HC) { REG_WR(bp, HC_REG_TRAILING_EDGE_0 + port*8, val); REG_WR(bp, HC_REG_LEADING_EDGE_0 + port*8, val); @@ -2756,8 +2761,14 @@ static void bnx2x_pf_rx_q_prep(struct bnx2x *bp, u16 tpa_agg_size = 0; if (!fp->disable_tpa) { - pause->sge_th_hi = 250; - pause->sge_th_lo = 150; + pause->sge_th_lo = SGE_TH_LO(bp); + pause->sge_th_hi = SGE_TH_HI(bp); + + /* validate SGE ring has enough to cross high threshold */ + WARN_ON(bp->dropless_fc && + pause->sge_th_hi + FW_PREFETCH_CNT > + MAX_RX_SGE_CNT * NUM_RX_SGE_PAGES); + tpa_agg_size = min_t(u32, (min_t(u32, 8, MAX_SKB_FRAGS) * SGE_PAGE_SIZE * PAGES_PER_SGE), 0xffff); @@ -2771,10 +2782,21 @@ static void bnx2x_pf_rx_q_prep(struct bnx2x *bp, /* pause - not for e1 */ if (!CHIP_IS_E1(bp)) { - pause->bd_th_hi = 350; - pause->bd_th_lo = 250; - pause->rcq_th_hi = 350; - pause->rcq_th_lo = 250; + pause->bd_th_lo = BD_TH_LO(bp); + pause->bd_th_hi = BD_TH_HI(bp); + + pause->rcq_th_lo = RCQ_TH_LO(bp); + pause->rcq_th_hi = RCQ_TH_HI(bp); + /* + * validate that rings have enough entries to cross + * high thresholds + */ + WARN_ON(bp->dropless_fc && + pause->bd_th_hi + FW_PREFETCH_CNT > + bp->rx_ring_size); + WARN_ON(bp->dropless_fc && + pause->rcq_th_hi + FW_PREFETCH_CNT > + NUM_RCQ_RINGS * MAX_RCQ_DESC_CNT); pause->pri_map = 1; } @@ -2802,9 +2824,7 @@ static void bnx2x_pf_rx_q_prep(struct bnx2x *bp, * For PF Clients it should be the maximum avaliable number. * VF driver(s) may want to define it to a smaller value. */ - rxq_init->max_tpa_queues = - (CHIP_IS_E1(bp) ? ETH_MAX_AGGREGATION_QUEUES_E1 : - ETH_MAX_AGGREGATION_QUEUES_E1H_E2); + rxq_init->max_tpa_queues = MAX_AGG_QS(bp); rxq_init->cache_line_log = BNX2X_RX_ALIGN_SHIFT; rxq_init->fw_sb_id = fp->fw_sb_id; @@ -4808,6 +4828,37 @@ void bnx2x_setup_ndsb_state_machine(struct hc_status_block_sm *hc_sm, hc_sm->time_to_expire = 0xFFFFFFFF; } + +/* allocates state machine ids. */ +static inline +void bnx2x_map_sb_state_machines(struct hc_index_data *index_data) +{ + /* zero out state machine indices */ + /* rx indices */ + index_data[HC_INDEX_ETH_RX_CQ_CONS].flags &= ~HC_INDEX_DATA_SM_ID; + + /* tx indices */ + index_data[HC_INDEX_OOO_TX_CQ_CONS].flags &= ~HC_INDEX_DATA_SM_ID; + index_data[HC_INDEX_ETH_TX_CQ_CONS_COS0].flags &= ~HC_INDEX_DATA_SM_ID; + index_data[HC_INDEX_ETH_TX_CQ_CONS_COS1].flags &= ~HC_INDEX_DATA_SM_ID; + index_data[HC_INDEX_ETH_TX_CQ_CONS_COS2].flags &= ~HC_INDEX_DATA_SM_ID; + + /* map indices */ + /* rx indices */ + index_data[HC_INDEX_ETH_RX_CQ_CONS].flags |= + SM_RX_ID << HC_INDEX_DATA_SM_ID_SHIFT; + + /* tx indices */ + index_data[HC_INDEX_OOO_TX_CQ_CONS].flags |= + SM_TX_ID << HC_INDEX_DATA_SM_ID_SHIFT; + index_data[HC_INDEX_ETH_TX_CQ_CONS_COS0].flags |= + SM_TX_ID << HC_INDEX_DATA_SM_ID_SHIFT; + index_data[HC_INDEX_ETH_TX_CQ_CONS_COS1].flags |= + SM_TX_ID << HC_INDEX_DATA_SM_ID_SHIFT; + index_data[HC_INDEX_ETH_TX_CQ_CONS_COS2].flags |= + SM_TX_ID << HC_INDEX_DATA_SM_ID_SHIFT; +} + static void bnx2x_init_sb(struct bnx2x *bp, dma_addr_t mapping, int vfid, u8 vf_valid, int fw_sb_id, int igu_sb_id) { @@ -4839,6 +4890,7 @@ static void bnx2x_init_sb(struct bnx2x *bp, dma_addr_t mapping, int vfid, hc_sm_p = sb_data_e2.common.state_machine; sb_data_p = (u32 *)&sb_data_e2; data_size = sizeof(struct hc_status_block_data_e2)/sizeof(u32); + bnx2x_map_sb_state_machines(sb_data_e2.index_data); } else { memset(&sb_data_e1x, 0, sizeof(struct hc_status_block_data_e1x)); @@ -4853,6 +4905,7 @@ static void bnx2x_init_sb(struct bnx2x *bp, dma_addr_t mapping, int vfid, hc_sm_p = sb_data_e1x.common.state_machine; sb_data_p = (u32 *)&sb_data_e1x; data_size = sizeof(struct hc_status_block_data_e1x)/sizeof(u32); + bnx2x_map_sb_state_machines(sb_data_e1x.index_data); } bnx2x_setup_ndsb_state_machine(&hc_sm_p[SM_RX_ID], @@ -5802,7 +5855,7 @@ static int bnx2x_init_hw_common(struct bnx2x *bp) * take the UNDI lock to protect undi_unload flow from accessing * registers while we're resetting the chip */ - bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_UNDI); + bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_RESET); bnx2x_reset_common(bp); REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, 0xffffffff); @@ -5814,7 +5867,7 @@ static int bnx2x_init_hw_common(struct bnx2x *bp) } REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET, val); - bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_UNDI); + bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_RESET); bnx2x_init_block(bp, BLOCK_MISC, PHASE_COMMON); @@ -6671,12 +6724,16 @@ static int bnx2x_init_hw_func(struct bnx2x *bp) if (CHIP_MODE_IS_4_PORT(bp)) dsb_idx = BP_FUNC(bp); else - dsb_idx = BP_E1HVN(bp); + dsb_idx = BP_VN(bp); prod_offset = (CHIP_INT_MODE_IS_BC(bp) ? IGU_BC_BASE_DSB_PROD + dsb_idx : IGU_NORM_BASE_DSB_PROD + dsb_idx); + /* + * igu prods come in chunks of E1HVN_MAX (4) - + * does not matters what is the current chip mode + */ for (i = 0; i < (num_segs * E1HVN_MAX); i += E1HVN_MAX) { addr = IGU_REG_PROD_CONS_MEMORY + @@ -7570,7 +7627,7 @@ u32 bnx2x_send_unload_req(struct bnx2x *bp, int unload_mode) u32 val; /* The mac address is written to entries 1-4 to preserve entry 0 which is used by the PMF */ - u8 entry = (BP_E1HVN(bp) + 1)*8; + u8 entry = (BP_VN(bp) + 1)*8; val = (mac_addr[0] << 8) | mac_addr[1]; EMAC_WR(bp, EMAC_REG_EMAC_MAC_MATCH + entry, val); @@ -8546,10 +8603,12 @@ static void __devinit bnx2x_undi_unload(struct bnx2x *bp) /* Check if there is any driver already loaded */ val = REG_RD(bp, MISC_REG_UNPREPARED); if (val == 0x1) { - /* Check if it is the UNDI driver + + bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_RESET); + /* + * Check if it is the UNDI driver * UNDI driver initializes CID offset for normal bell to 0x7 */ - bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_UNDI); val = REG_RD(bp, DORQ_REG_NORM_CID_OFST); if (val == 0x7) { u32 reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS; @@ -8587,9 +8646,6 @@ static void __devinit bnx2x_undi_unload(struct bnx2x *bp) bnx2x_fw_command(bp, reset_code, 0); } - /* now it's safe to release the lock */ - bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_UNDI); - bnx2x_undi_int_disable(bp); port = BP_PORT(bp); @@ -8639,8 +8695,10 @@ static void __devinit bnx2x_undi_unload(struct bnx2x *bp) bp->fw_seq = (SHMEM_RD(bp, func_mb[bp->pf_num].drv_mb_header) & DRV_MSG_SEQ_NUMBER_MASK); - } else - bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_UNDI); + } + + /* now it's safe to release the lock */ + bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_RESET); } } @@ -8777,13 +8835,13 @@ static void __devinit bnx2x_get_common_hwinfo(struct bnx2x *bp) static void __devinit bnx2x_get_igu_cam_info(struct bnx2x *bp) { int pfid = BP_FUNC(bp); - int vn = BP_E1HVN(bp); int igu_sb_id; u32 val; u8 fid, igu_sb_cnt = 0; bp->igu_base_sb = 0xff; if (CHIP_INT_MODE_IS_BC(bp)) { + int vn = BP_VN(bp); igu_sb_cnt = bp->igu_sb_cnt; bp->igu_base_sb = (CHIP_MODE_IS_4_PORT(bp) ? pfid : vn) * FP_SB_MAX_E1x; @@ -9416,6 +9474,10 @@ static int __devinit bnx2x_get_hwinfo(struct bnx2x *bp) bp->igu_base_sb = 0; } else { bp->common.int_block = INT_BLOCK_IGU; + + /* do not allow device reset during IGU info preocessing */ + bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_RESET); + val = REG_RD(bp, IGU_REG_BLOCK_CONFIGURATION); if (val & IGU_BLOCK_CONFIGURATION_REG_BACKWARD_COMP_EN) { @@ -9447,6 +9509,7 @@ static int __devinit bnx2x_get_hwinfo(struct bnx2x *bp) bnx2x_get_igu_cam_info(bp); + bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_RESET); } /* @@ -9473,7 +9536,7 @@ static int __devinit bnx2x_get_hwinfo(struct bnx2x *bp) bp->mf_ov = 0; bp->mf_mode = 0; - vn = BP_E1HVN(bp); + vn = BP_VN(bp); if (!CHIP_IS_E1(bp) && !BP_NOMCP(bp)) { BNX2X_DEV_INFO("shmem2base 0x%x, size %d, mfcfg offset %d\n", @@ -9593,13 +9656,6 @@ static int __devinit bnx2x_get_hwinfo(struct bnx2x *bp) /* port info */ bnx2x_get_port_hwinfo(bp); - if (!BP_NOMCP(bp)) { - bp->fw_seq = - (SHMEM_RD(bp, func_mb[BP_FW_MB_IDX(bp)].drv_mb_header) & - DRV_MSG_SEQ_NUMBER_MASK); - BNX2X_DEV_INFO("fw_seq 0x%08x\n", bp->fw_seq); - } - /* Get MAC addresses */ bnx2x_get_mac_hwinfo(bp); @@ -9765,6 +9821,14 @@ static int __devinit bnx2x_init_bp(struct bnx2x *bp) if (!BP_NOMCP(bp)) bnx2x_undi_unload(bp); + /* init fw_seq after undi_unload! */ + if (!BP_NOMCP(bp)) { + bp->fw_seq = + (SHMEM_RD(bp, func_mb[BP_FW_MB_IDX(bp)].drv_mb_header) & + DRV_MSG_SEQ_NUMBER_MASK); + BNX2X_DEV_INFO("fw_seq 0x%08x\n", bp->fw_seq); + } + if (CHIP_REV_IS_FPGA(bp)) dev_err(&bp->pdev->dev, "FPGA detected\n"); @@ -10259,17 +10323,21 @@ static int __devinit bnx2x_init_dev(struct pci_dev *pdev, /* clean indirect addresses */ pci_write_config_dword(bp->pdev, PCICFG_GRC_ADDRESS, PCICFG_VENDOR_ID_OFFSET); - /* Clean the following indirect addresses for all functions since it + /* + * Clean the following indirect addresses for all functions since it * is not used by the driver. */ REG_WR(bp, PXP2_REG_PGL_ADDR_88_F0, 0); REG_WR(bp, PXP2_REG_PGL_ADDR_8C_F0, 0); REG_WR(bp, PXP2_REG_PGL_ADDR_90_F0, 0); REG_WR(bp, PXP2_REG_PGL_ADDR_94_F0, 0); - REG_WR(bp, PXP2_REG_PGL_ADDR_88_F1, 0); - REG_WR(bp, PXP2_REG_PGL_ADDR_8C_F1, 0); - REG_WR(bp, PXP2_REG_PGL_ADDR_90_F1, 0); - REG_WR(bp, PXP2_REG_PGL_ADDR_94_F1, 0); + + if (CHIP_IS_E1x(bp)) { + REG_WR(bp, PXP2_REG_PGL_ADDR_88_F1, 0); + REG_WR(bp, PXP2_REG_PGL_ADDR_8C_F1, 0); + REG_WR(bp, PXP2_REG_PGL_ADDR_90_F1, 0); + REG_WR(bp, PXP2_REG_PGL_ADDR_94_F1, 0); + } /* * Enable internal target-read (in case we are probed after PF FLR). diff --git a/drivers/net/bnx2x/bnx2x_reg.h b/drivers/net/bnx2x/bnx2x_reg.h index 40266c1..750e844 100644 --- a/drivers/net/bnx2x/bnx2x_reg.h +++ b/drivers/net/bnx2x/bnx2x_reg.h @@ -5320,7 +5320,7 @@ #define XCM_REG_XX_OVFL_EVNT_ID 0x20058 #define XMAC_CLEAR_RX_LSS_STATUS_REG_CLEAR_LOCAL_FAULT_STATUS (0x1<<0) #define XMAC_CLEAR_RX_LSS_STATUS_REG_CLEAR_REMOTE_FAULT_STATUS (0x1<<1) -#define XMAC_CTRL_REG_CORE_LOCAL_LPBK (0x1<<3) +#define XMAC_CTRL_REG_LINE_LOCAL_LPBK (0x1<<2) #define XMAC_CTRL_REG_RX_EN (0x1<<1) #define XMAC_CTRL_REG_SOFT_RESET (0x1<<6) #define XMAC_CTRL_REG_TX_EN (0x1<<0) @@ -5766,7 +5766,7 @@ #define HW_LOCK_RESOURCE_RECOVERY_LEADER_0 8 #define HW_LOCK_RESOURCE_RECOVERY_LEADER_1 9 #define HW_LOCK_RESOURCE_SPIO 2 -#define HW_LOCK_RESOURCE_UNDI 5 +#define HW_LOCK_RESOURCE_RESET 5 #define AEU_INPUTS_ATTN_BITS_ATC_HW_INTERRUPT (0x1<<4) #define AEU_INPUTS_ATTN_BITS_ATC_PARITY_ERROR (0x1<<5) #define AEU_INPUTS_ATTN_BITS_BRB_PARITY_ERROR (0x1<<18) @@ -6853,6 +6853,9 @@ Theotherbitsarereservedandshouldbezero*/ #define MDIO_WC_REG_IEEE0BLK_AUTONEGNP 0x7 #define MDIO_WC_REG_AN_IEEE1BLK_AN_ADVERTISEMENT0 0x10 #define MDIO_WC_REG_AN_IEEE1BLK_AN_ADVERTISEMENT1 0x11 +#define MDIO_WC_REG_AN_IEEE1BLK_AN_ADVERTISEMENT2 0x12 +#define MDIO_WC_REG_AN_IEEE1BLK_AN_ADV2_FEC_ABILITY 0x4000 +#define MDIO_WC_REG_AN_IEEE1BLK_AN_ADV2_FEC_REQ 0x8000 #define MDIO_WC_REG_PMD_IEEE9BLK_TENGBASE_KR_PMD_CONTROL_REGISTER_150 0x96 #define MDIO_WC_REG_XGXSBLK0_XGXSCONTROL 0x8000 #define MDIO_WC_REG_XGXSBLK0_MISCCONTROL1 0x800e diff --git a/drivers/net/bnx2x/bnx2x_stats.c b/drivers/net/bnx2x/bnx2x_stats.c index 771f680..9908f2bb 100644 --- a/drivers/net/bnx2x/bnx2x_stats.c +++ b/drivers/net/bnx2x/bnx2x_stats.c @@ -710,7 +710,8 @@ static int bnx2x_hw_stats_update(struct bnx2x *bp) break; case MAC_TYPE_NONE: /* unreached */ - BNX2X_ERR("stats updated by DMAE but no MAC active\n"); + DP(BNX2X_MSG_STATS, + "stats updated by DMAE but no MAC active\n"); return -1; default: /* unreached */ @@ -1391,7 +1392,7 @@ static void bnx2x_port_stats_base_init(struct bnx2x *bp) static void bnx2x_func_stats_base_init(struct bnx2x *bp) { - int vn, vn_max = IS_MF(bp) ? E1HVN_MAX : E1VN_MAX; + int vn, vn_max = IS_MF(bp) ? BP_MAX_VN_NUM(bp) : E1VN_MAX; u32 func_stx; /* sanity */ @@ -1404,7 +1405,7 @@ static void bnx2x_func_stats_base_init(struct bnx2x *bp) func_stx = bp->func_stx; for (vn = VN_0; vn < vn_max; vn++) { - int mb_idx = CHIP_IS_E1x(bp) ? 2*vn + BP_PORT(bp) : vn; + int mb_idx = BP_FW_MB_IDX_VN(bp, vn); bp->func_stx = SHMEM_RD(bp, func_mb[mb_idx].fw_mb_param); bnx2x_func_stats_init(bp); diff --git a/drivers/net/can/ti_hecc.c b/drivers/net/can/ti_hecc.c index a812492..2adc294 100644 --- a/drivers/net/can/ti_hecc.c +++ b/drivers/net/can/ti_hecc.c @@ -46,6 +46,7 @@ #include <linux/skbuff.h> #include <linux/platform_device.h> #include <linux/clk.h> +#include <linux/io.h> #include <linux/can/dev.h> #include <linux/can/error.h> diff --git a/drivers/net/e1000/e1000_hw.c b/drivers/net/e1000/e1000_hw.c index 8545c7a..a5a89ec 100644 --- a/drivers/net/e1000/e1000_hw.c +++ b/drivers/net/e1000/e1000_hw.c @@ -4026,6 +4026,12 @@ s32 e1000_validate_eeprom_checksum(struct e1000_hw *hw) checksum += eeprom_data; } +#ifdef CONFIG_PARISC + /* This is a signature and not a checksum on HP c8000 */ + if ((hw->subsystem_vendor_id == 0x103C) && (eeprom_data == 0x16d6)) + return E1000_SUCCESS; + +#endif if (checksum == (u16) EEPROM_SUM) return E1000_SUCCESS; else { diff --git a/drivers/net/gianfar_ethtool.c b/drivers/net/gianfar_ethtool.c index 25a8c2a..0caf3c3 100644 --- a/drivers/net/gianfar_ethtool.c +++ b/drivers/net/gianfar_ethtool.c @@ -1669,10 +1669,10 @@ static int gfar_get_cls_all(struct gfar_private *priv, u32 i = 0; list_for_each_entry(comp, &priv->rx_list.list, list) { - if (i <= cmd->rule_cnt) { - rule_locs[i] = comp->fs.location; - i++; - } + if (i == cmd->rule_cnt) + return -EMSGSIZE; + rule_locs[i] = comp->fs.location; + i++; } cmd->data = MAX_FILER_IDX; diff --git a/drivers/net/greth.c b/drivers/net/greth.c index 16ce45c..52a3900 100644 --- a/drivers/net/greth.c +++ b/drivers/net/greth.c @@ -428,6 +428,7 @@ greth_start_xmit(struct sk_buff *skb, struct net_device *dev) dma_sync_single_for_device(greth->dev, dma_addr, skb->len, DMA_TO_DEVICE); status = GRETH_BD_EN | GRETH_BD_IE | (skb->len & GRETH_BD_LEN); + greth->tx_bufs_length[greth->tx_next] = skb->len & GRETH_BD_LEN; /* Wrap around descriptor ring */ if (greth->tx_next == GRETH_TXBD_NUM_MASK) { @@ -490,7 +491,8 @@ greth_start_xmit_gbit(struct sk_buff *skb, struct net_device *dev) if (nr_frags != 0) status = GRETH_TXBD_MORE; - status |= GRETH_TXBD_CSALL; + if (skb->ip_summed == CHECKSUM_PARTIAL) + status |= GRETH_TXBD_CSALL; status |= skb_headlen(skb) & GRETH_BD_LEN; if (greth->tx_next == GRETH_TXBD_NUM_MASK) status |= GRETH_BD_WR; @@ -513,7 +515,9 @@ greth_start_xmit_gbit(struct sk_buff *skb, struct net_device *dev) greth->tx_skbuff[curr_tx] = NULL; bdp = greth->tx_bd_base + curr_tx; - status = GRETH_TXBD_CSALL | GRETH_BD_EN; + status = GRETH_BD_EN; + if (skb->ip_summed == CHECKSUM_PARTIAL) + status |= GRETH_TXBD_CSALL; status |= frag->size & GRETH_BD_LEN; /* Wrap around descriptor ring */ @@ -641,6 +645,7 @@ static void greth_clean_tx(struct net_device *dev) dev->stats.tx_fifo_errors++; } dev->stats.tx_packets++; + dev->stats.tx_bytes += greth->tx_bufs_length[greth->tx_last]; greth->tx_last = NEXT_TX(greth->tx_last); greth->tx_free++; } @@ -695,6 +700,7 @@ static void greth_clean_tx_gbit(struct net_device *dev) greth->tx_skbuff[greth->tx_last] = NULL; greth_update_tx_stats(dev, stat); + dev->stats.tx_bytes += skb->len; bdp = greth->tx_bd_base + greth->tx_last; @@ -796,6 +802,7 @@ static int greth_rx(struct net_device *dev, int limit) memcpy(skb_put(skb, pkt_len), phys_to_virt(dma_addr), pkt_len); skb->protocol = eth_type_trans(skb, dev); + dev->stats.rx_bytes += pkt_len; dev->stats.rx_packets++; netif_receive_skb(skb); } @@ -910,6 +917,7 @@ static int greth_rx_gbit(struct net_device *dev, int limit) skb->protocol = eth_type_trans(skb, dev); dev->stats.rx_packets++; + dev->stats.rx_bytes += pkt_len; netif_receive_skb(skb); greth->rx_skbuff[greth->rx_cur] = newskb; diff --git a/drivers/net/greth.h b/drivers/net/greth.h index 9a0040d..232a622 100644 --- a/drivers/net/greth.h +++ b/drivers/net/greth.h @@ -103,6 +103,7 @@ struct greth_private { unsigned char *tx_bufs[GRETH_TXBD_NUM]; unsigned char *rx_bufs[GRETH_RXBD_NUM]; + u16 tx_bufs_length[GRETH_TXBD_NUM]; u16 tx_next; u16 tx_last; diff --git a/drivers/net/ibmveth.c b/drivers/net/ibmveth.c index 3e66792..8dd5fcc 100644 --- a/drivers/net/ibmveth.c +++ b/drivers/net/ibmveth.c @@ -757,7 +757,7 @@ static int ibmveth_set_csum_offload(struct net_device *dev, u32 data) struct ibmveth_adapter *adapter = netdev_priv(dev); unsigned long set_attr, clr_attr, ret_attr; unsigned long set_attr6, clr_attr6; - long ret, ret6; + long ret, ret4, ret6; int rc1 = 0, rc2 = 0; int restart = 0; @@ -770,6 +770,8 @@ static int ibmveth_set_csum_offload(struct net_device *dev, u32 data) set_attr = 0; clr_attr = 0; + set_attr6 = 0; + clr_attr6 = 0; if (data) { set_attr = IBMVETH_ILLAN_IPV4_TCP_CSUM; @@ -784,16 +786,20 @@ static int ibmveth_set_csum_offload(struct net_device *dev, u32 data) if (ret == H_SUCCESS && !(ret_attr & IBMVETH_ILLAN_ACTIVE_TRUNK) && !(ret_attr & IBMVETH_ILLAN_TRUNK_PRI_MASK) && (ret_attr & IBMVETH_ILLAN_PADDED_PKT_CSUM)) { - ret = h_illan_attributes(adapter->vdev->unit_address, clr_attr, + ret4 = h_illan_attributes(adapter->vdev->unit_address, clr_attr, set_attr, &ret_attr); - if (ret != H_SUCCESS) { + if (ret4 != H_SUCCESS) { netdev_err(dev, "unable to change IPv4 checksum " "offload settings. %d rc=%ld\n", - data, ret); + data, ret4); + + h_illan_attributes(adapter->vdev->unit_address, + set_attr, clr_attr, &ret_attr); + + if (data == 1) + dev->features &= ~NETIF_F_IP_CSUM; - ret = h_illan_attributes(adapter->vdev->unit_address, - set_attr, clr_attr, &ret_attr); } else { adapter->fw_ipv4_csum_support = data; } @@ -804,15 +810,18 @@ static int ibmveth_set_csum_offload(struct net_device *dev, u32 data) if (ret6 != H_SUCCESS) { netdev_err(dev, "unable to change IPv6 checksum " "offload settings. %d rc=%ld\n", - data, ret); + data, ret6); + + h_illan_attributes(adapter->vdev->unit_address, + set_attr6, clr_attr6, &ret_attr); + + if (data == 1) + dev->features &= ~NETIF_F_IPV6_CSUM; - ret = h_illan_attributes(adapter->vdev->unit_address, - set_attr6, clr_attr6, - &ret_attr); } else adapter->fw_ipv6_csum_support = data; - if (ret != H_SUCCESS || ret6 != H_SUCCESS) + if (ret4 == H_SUCCESS || ret6 == H_SUCCESS) adapter->rx_csum = data; else rc1 = -EIO; @@ -930,6 +939,7 @@ static netdev_tx_t ibmveth_start_xmit(struct sk_buff *skb, union ibmveth_buf_desc descs[6]; int last, i; int force_bounce = 0; + dma_addr_t dma_addr; /* * veth handles a maximum of 6 segments including the header, so @@ -994,17 +1004,16 @@ retry_bounce: } /* Map the header */ - descs[0].fields.address = dma_map_single(&adapter->vdev->dev, skb->data, - skb_headlen(skb), - DMA_TO_DEVICE); - if (dma_mapping_error(&adapter->vdev->dev, descs[0].fields.address)) + dma_addr = dma_map_single(&adapter->vdev->dev, skb->data, + skb_headlen(skb), DMA_TO_DEVICE); + if (dma_mapping_error(&adapter->vdev->dev, dma_addr)) goto map_failed; descs[0].fields.flags_len = desc_flags | skb_headlen(skb); + descs[0].fields.address = dma_addr; /* Map the frags */ for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) { - unsigned long dma_addr; skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; dma_addr = dma_map_page(&adapter->vdev->dev, frag->page, @@ -1026,7 +1035,12 @@ retry_bounce: netdev->stats.tx_bytes += skb->len; } - for (i = 0; i < skb_shinfo(skb)->nr_frags + 1; i++) + dma_unmap_single(&adapter->vdev->dev, + descs[0].fields.address, + descs[0].fields.flags_len & IBMVETH_BUF_LEN_MASK, + DMA_TO_DEVICE); + + for (i = 1; i < skb_shinfo(skb)->nr_frags + 1; i++) dma_unmap_page(&adapter->vdev->dev, descs[i].fields.address, descs[i].fields.flags_len & IBMVETH_BUF_LEN_MASK, DMA_TO_DEVICE); diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index 2279039..e1fcc95 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -1321,8 +1321,8 @@ static void ixgbe_clean_rx_irq(struct ixgbe_q_vector *q_vector, if (ring_is_rsc_enabled(rx_ring)) pkt_is_rsc = ixgbe_get_rsc_state(rx_desc); - /* if this is a skb from previous receive DMA will be 0 */ - if (rx_buffer_info->dma) { + /* linear means we are building an skb from multiple pages */ + if (!skb_is_nonlinear(skb)) { u16 hlen; if (pkt_is_rsc && !(staterr & IXGBE_RXD_STAT_EOP) && diff --git a/drivers/net/netconsole.c b/drivers/net/netconsole.c index dfc8272..ed2a397 100644 --- a/drivers/net/netconsole.c +++ b/drivers/net/netconsole.c @@ -799,5 +799,11 @@ static void __exit cleanup_netconsole(void) } } -module_init(init_netconsole); +/* + * Use late_initcall to ensure netconsole is + * initialized after network device driver if built-in. + * + * late_initcall() and module_init() are identical if built as module. + */ +late_initcall(init_netconsole); module_exit(cleanup_netconsole); diff --git a/drivers/net/pch_gbe/pch_gbe.h b/drivers/net/pch_gbe/pch_gbe.h index 59fac77..a09a0719 100644 --- a/drivers/net/pch_gbe/pch_gbe.h +++ b/drivers/net/pch_gbe/pch_gbe.h @@ -127,8 +127,8 @@ struct pch_gbe_regs { /* Reset */ #define PCH_GBE_ALL_RST 0x80000000 /* All reset */ -#define PCH_GBE_TX_RST 0x40000000 /* TX MAC, TX FIFO, TX DMA reset */ -#define PCH_GBE_RX_RST 0x04000000 /* RX MAC, RX FIFO, RX DMA reset */ +#define PCH_GBE_TX_RST 0x00008000 /* TX MAC, TX FIFO, TX DMA reset */ +#define PCH_GBE_RX_RST 0x00004000 /* RX MAC, RX FIFO, RX DMA reset */ /* TCP/IP Accelerator Control */ #define PCH_GBE_EX_LIST_EN 0x00000008 /* External List Enable */ @@ -276,6 +276,9 @@ struct pch_gbe_regs { #define PCH_GBE_RX_DMA_EN 0x00000002 /* Enables Receive DMA */ #define PCH_GBE_TX_DMA_EN 0x00000001 /* Enables Transmission DMA */ +/* RX DMA STATUS */ +#define PCH_GBE_IDLE_CHECK 0xFFFFFFFE + /* Wake On LAN Status */ #define PCH_GBE_WLS_BR 0x00000008 /* Broadcas Address */ #define PCH_GBE_WLS_MLT 0x00000004 /* Multicast Address */ @@ -471,6 +474,7 @@ struct pch_gbe_tx_desc { struct pch_gbe_buffer { struct sk_buff *skb; dma_addr_t dma; + unsigned char *rx_buffer; unsigned long time_stamp; u16 length; bool mapped; @@ -511,6 +515,9 @@ struct pch_gbe_tx_ring { struct pch_gbe_rx_ring { struct pch_gbe_rx_desc *desc; dma_addr_t dma; + unsigned char *rx_buff_pool; + dma_addr_t rx_buff_pool_logic; + unsigned int rx_buff_pool_size; unsigned int size; unsigned int count; unsigned int next_to_use; @@ -622,6 +629,7 @@ struct pch_gbe_adapter { unsigned long rx_buffer_len; unsigned long tx_queue_len; bool have_msi; + bool rx_stop_flag; }; extern const char pch_driver_version[]; diff --git a/drivers/net/pch_gbe/pch_gbe_main.c b/drivers/net/pch_gbe/pch_gbe_main.c index eac3c5c..567ff10 100644 --- a/drivers/net/pch_gbe/pch_gbe_main.c +++ b/drivers/net/pch_gbe/pch_gbe_main.c @@ -20,7 +20,6 @@ #include "pch_gbe.h" #include "pch_gbe_api.h" -#include <linux/prefetch.h> #define DRV_VERSION "1.00" const char pch_driver_version[] = DRV_VERSION; @@ -34,11 +33,15 @@ const char pch_driver_version[] = DRV_VERSION; #define PCH_GBE_WATCHDOG_PERIOD (1 * HZ) /* watchdog time */ #define PCH_GBE_COPYBREAK_DEFAULT 256 #define PCH_GBE_PCI_BAR 1 +#define PCH_GBE_RESERVE_MEMORY 0x200000 /* 2MB */ /* Macros for ML7223 */ #define PCI_VENDOR_ID_ROHM 0x10db #define PCI_DEVICE_ID_ROHM_ML7223_GBE 0x8013 +/* Macros for ML7831 */ +#define PCI_DEVICE_ID_ROHM_ML7831_GBE 0x8802 + #define PCH_GBE_TX_WEIGHT 64 #define PCH_GBE_RX_WEIGHT 64 #define PCH_GBE_RX_BUFFER_WRITE 16 @@ -52,6 +55,7 @@ const char pch_driver_version[] = DRV_VERSION; ) /* Ethertype field values */ +#define PCH_GBE_MAX_RX_BUFFER_SIZE 0x2880 #define PCH_GBE_MAX_JUMBO_FRAME_SIZE 10318 #define PCH_GBE_FRAME_SIZE_2048 2048 #define PCH_GBE_FRAME_SIZE_4096 4096 @@ -83,10 +87,12 @@ const char pch_driver_version[] = DRV_VERSION; #define PCH_GBE_INT_ENABLE_MASK ( \ PCH_GBE_INT_RX_DMA_CMPLT | \ PCH_GBE_INT_RX_DSC_EMP | \ + PCH_GBE_INT_RX_FIFO_ERR | \ PCH_GBE_INT_WOL_DET | \ PCH_GBE_INT_TX_CMPLT \ ) +#define PCH_GBE_INT_DISABLE_ALL 0 static unsigned int copybreak __read_mostly = PCH_GBE_COPYBREAK_DEFAULT; @@ -138,6 +144,27 @@ static void pch_gbe_wait_clr_bit(void *reg, u32 bit) if (!tmp) pr_err("Error: busy bit is not cleared\n"); } + +/** + * pch_gbe_wait_clr_bit_irq - Wait to clear a bit for interrupt context + * @reg: Pointer of register + * @busy: Busy bit + */ +static int pch_gbe_wait_clr_bit_irq(void *reg, u32 bit) +{ + u32 tmp; + int ret = -1; + /* wait busy */ + tmp = 20; + while ((ioread32(reg) & bit) && --tmp) + udelay(5); + if (!tmp) + pr_err("Error: busy bit is not cleared\n"); + else + ret = 0; + return ret; +} + /** * pch_gbe_mac_mar_set - Set MAC address register * @hw: Pointer to the HW structure @@ -189,6 +216,17 @@ static void pch_gbe_mac_reset_hw(struct pch_gbe_hw *hw) return; } +static void pch_gbe_mac_reset_rx(struct pch_gbe_hw *hw) +{ + /* Read the MAC address. and store to the private data */ + pch_gbe_mac_read_mac_addr(hw); + iowrite32(PCH_GBE_RX_RST, &hw->reg->RESET); + pch_gbe_wait_clr_bit_irq(&hw->reg->RESET, PCH_GBE_RX_RST); + /* Setup the MAC address */ + pch_gbe_mac_mar_set(hw, hw->mac.addr, 0); + return; +} + /** * pch_gbe_mac_init_rx_addrs - Initialize receive address's * @hw: Pointer to the HW structure @@ -671,13 +709,8 @@ static void pch_gbe_setup_rctl(struct pch_gbe_adapter *adapter) tcpip = ioread32(&hw->reg->TCPIP_ACC); - if (netdev->features & NETIF_F_RXCSUM) { - tcpip &= ~PCH_GBE_RX_TCPIPACC_OFF; - tcpip |= PCH_GBE_RX_TCPIPACC_EN; - } else { - tcpip |= PCH_GBE_RX_TCPIPACC_OFF; - tcpip &= ~PCH_GBE_RX_TCPIPACC_EN; - } + tcpip |= PCH_GBE_RX_TCPIPACC_OFF; + tcpip &= ~PCH_GBE_RX_TCPIPACC_EN; iowrite32(tcpip, &hw->reg->TCPIP_ACC); return; } @@ -717,13 +750,6 @@ static void pch_gbe_configure_rx(struct pch_gbe_adapter *adapter) iowrite32(rdba, &hw->reg->RX_DSC_BASE); iowrite32(rdlen, &hw->reg->RX_DSC_SIZE); iowrite32((rdba + rdlen), &hw->reg->RX_DSC_SW_P); - - /* Enables Receive DMA */ - rxdma = ioread32(&hw->reg->DMA_CTRL); - rxdma |= PCH_GBE_RX_DMA_EN; - iowrite32(rxdma, &hw->reg->DMA_CTRL); - /* Enables Receive */ - iowrite32(PCH_GBE_MRE_MAC_RX_EN, &hw->reg->MAC_RX_EN); } /** @@ -1097,6 +1123,48 @@ void pch_gbe_update_stats(struct pch_gbe_adapter *adapter) spin_unlock_irqrestore(&adapter->stats_lock, flags); } +static void pch_gbe_stop_receive(struct pch_gbe_adapter *adapter) +{ + struct pch_gbe_hw *hw = &adapter->hw; + u32 rxdma; + u16 value; + int ret; + + /* Disable Receive DMA */ + rxdma = ioread32(&hw->reg->DMA_CTRL); + rxdma &= ~PCH_GBE_RX_DMA_EN; + iowrite32(rxdma, &hw->reg->DMA_CTRL); + /* Wait Rx DMA BUS is IDLE */ + ret = pch_gbe_wait_clr_bit_irq(&hw->reg->RX_DMA_ST, PCH_GBE_IDLE_CHECK); + if (ret) { + /* Disable Bus master */ + pci_read_config_word(adapter->pdev, PCI_COMMAND, &value); + value &= ~PCI_COMMAND_MASTER; + pci_write_config_word(adapter->pdev, PCI_COMMAND, value); + /* Stop Receive */ + pch_gbe_mac_reset_rx(hw); + /* Enable Bus master */ + value |= PCI_COMMAND_MASTER; + pci_write_config_word(adapter->pdev, PCI_COMMAND, value); + } else { + /* Stop Receive */ + pch_gbe_mac_reset_rx(hw); + } +} + +static void pch_gbe_start_receive(struct pch_gbe_hw *hw) +{ + u32 rxdma; + + /* Enables Receive DMA */ + rxdma = ioread32(&hw->reg->DMA_CTRL); + rxdma |= PCH_GBE_RX_DMA_EN; + iowrite32(rxdma, &hw->reg->DMA_CTRL); + /* Enables Receive */ + iowrite32(PCH_GBE_MRE_MAC_RX_EN, &hw->reg->MAC_RX_EN); + return; +} + /** * pch_gbe_intr - Interrupt Handler * @irq: Interrupt number @@ -1123,7 +1191,15 @@ static irqreturn_t pch_gbe_intr(int irq, void *data) if (int_st & PCH_GBE_INT_RX_FRAME_ERR) adapter->stats.intr_rx_frame_err_count++; if (int_st & PCH_GBE_INT_RX_FIFO_ERR) - adapter->stats.intr_rx_fifo_err_count++; + if (!adapter->rx_stop_flag) { + adapter->stats.intr_rx_fifo_err_count++; + pr_debug("Rx fifo over run\n"); + adapter->rx_stop_flag = true; + int_en = ioread32(&hw->reg->INT_EN); + iowrite32((int_en & ~PCH_GBE_INT_RX_FIFO_ERR), + &hw->reg->INT_EN); + pch_gbe_stop_receive(adapter); + } if (int_st & PCH_GBE_INT_RX_DMA_ERR) adapter->stats.intr_rx_dma_err_count++; if (int_st & PCH_GBE_INT_TX_FIFO_ERR) @@ -1135,7 +1211,7 @@ static irqreturn_t pch_gbe_intr(int irq, void *data) /* When Rx descriptor is empty */ if ((int_st & PCH_GBE_INT_RX_DSC_EMP)) { adapter->stats.intr_rx_dsc_empty_count++; - pr_err("Rx descriptor is empty\n"); + pr_debug("Rx descriptor is empty\n"); int_en = ioread32(&hw->reg->INT_EN); iowrite32((int_en & ~PCH_GBE_INT_RX_DSC_EMP), &hw->reg->INT_EN); if (hw->mac.tx_fc_enable) { @@ -1185,29 +1261,23 @@ pch_gbe_alloc_rx_buffers(struct pch_gbe_adapter *adapter, unsigned int i; unsigned int bufsz; - bufsz = adapter->rx_buffer_len + PCH_GBE_DMA_ALIGN; + bufsz = adapter->rx_buffer_len + NET_IP_ALIGN; i = rx_ring->next_to_use; while ((cleaned_count--)) { buffer_info = &rx_ring->buffer_info[i]; - skb = buffer_info->skb; - if (skb) { - skb_trim(skb, 0); - } else { - skb = netdev_alloc_skb(netdev, bufsz); - if (unlikely(!skb)) { - /* Better luck next round */ - adapter->stats.rx_alloc_buff_failed++; - break; - } - /* 64byte align */ - skb_reserve(skb, PCH_GBE_DMA_ALIGN); - - buffer_info->skb = skb; - buffer_info->length = adapter->rx_buffer_len; + skb = netdev_alloc_skb(netdev, bufsz); + if (unlikely(!skb)) { + /* Better luck next round */ + adapter->stats.rx_alloc_buff_failed++; + break; } + /* align */ + skb_reserve(skb, NET_IP_ALIGN); + buffer_info->skb = skb; + buffer_info->dma = dma_map_single(&pdev->dev, - skb->data, + buffer_info->rx_buffer, buffer_info->length, DMA_FROM_DEVICE); if (dma_mapping_error(&adapter->pdev->dev, buffer_info->dma)) { @@ -1240,6 +1310,36 @@ pch_gbe_alloc_rx_buffers(struct pch_gbe_adapter *adapter, return; } +static int +pch_gbe_alloc_rx_buffers_pool(struct pch_gbe_adapter *adapter, + struct pch_gbe_rx_ring *rx_ring, int cleaned_count) +{ + struct pci_dev *pdev = adapter->pdev; + struct pch_gbe_buffer *buffer_info; + unsigned int i; + unsigned int bufsz; + unsigned int size; + + bufsz = adapter->rx_buffer_len; + + size = rx_ring->count * bufsz + PCH_GBE_RESERVE_MEMORY; + rx_ring->rx_buff_pool = dma_alloc_coherent(&pdev->dev, size, + &rx_ring->rx_buff_pool_logic, + GFP_KERNEL); + if (!rx_ring->rx_buff_pool) { + pr_err("Unable to allocate memory for the receive poll buffer\n"); + return -ENOMEM; + } + memset(rx_ring->rx_buff_pool, 0, size); + rx_ring->rx_buff_pool_size = size; + for (i = 0; i < rx_ring->count; i++) { + buffer_info = &rx_ring->buffer_info[i]; + buffer_info->rx_buffer = rx_ring->rx_buff_pool + bufsz * i; + buffer_info->length = bufsz; + } + return 0; +} + /** * pch_gbe_alloc_tx_buffers - Allocate transmit buffers * @adapter: Board private structure @@ -1380,7 +1480,7 @@ pch_gbe_clean_rx(struct pch_gbe_adapter *adapter, unsigned int i; unsigned int cleaned_count = 0; bool cleaned = false; - struct sk_buff *skb, *new_skb; + struct sk_buff *skb; u8 dma_status; u16 gbec_status; u32 tcp_ip_status; @@ -1401,13 +1501,12 @@ pch_gbe_clean_rx(struct pch_gbe_adapter *adapter, rx_desc->gbec_status = DSC_INIT16; buffer_info = &rx_ring->buffer_info[i]; skb = buffer_info->skb; + buffer_info->skb = NULL; /* unmap dma */ dma_unmap_single(&pdev->dev, buffer_info->dma, buffer_info->length, DMA_FROM_DEVICE); buffer_info->mapped = false; - /* Prefetch the packet */ - prefetch(skb->data); pr_debug("RxDecNo = 0x%04x Status[DMA:0x%02x GBE:0x%04x " "TCP:0x%08x] BufInf = 0x%p\n", @@ -1427,70 +1526,16 @@ pch_gbe_clean_rx(struct pch_gbe_adapter *adapter, pr_err("Receive CRC Error\n"); } else { /* get receive length */ - /* length convert[-3] */ - length = (rx_desc->rx_words_eob) - 3; - - /* Decide the data conversion method */ - if (!(netdev->features & NETIF_F_RXCSUM)) { - /* [Header:14][payload] */ - if (NET_IP_ALIGN) { - /* Because alignment differs, - * the new_skb is newly allocated, - * and data is copied to new_skb.*/ - new_skb = netdev_alloc_skb(netdev, - length + NET_IP_ALIGN); - if (!new_skb) { - /* dorrop error */ - pr_err("New skb allocation " - "Error\n"); - goto dorrop; - } - skb_reserve(new_skb, NET_IP_ALIGN); - memcpy(new_skb->data, skb->data, - length); - skb = new_skb; - } else { - /* DMA buffer is used as SKB as it is.*/ - buffer_info->skb = NULL; - } - } else { - /* [Header:14][padding:2][payload] */ - /* The length includes padding length */ - length = length - PCH_GBE_DMA_PADDING; - if ((length < copybreak) || - (NET_IP_ALIGN != PCH_GBE_DMA_PADDING)) { - /* Because alignment differs, - * the new_skb is newly allocated, - * and data is copied to new_skb. - * Padding data is deleted - * at the time of a copy.*/ - new_skb = netdev_alloc_skb(netdev, - length + NET_IP_ALIGN); - if (!new_skb) { - /* dorrop error */ - pr_err("New skb allocation " - "Error\n"); - goto dorrop; - } - skb_reserve(new_skb, NET_IP_ALIGN); - memcpy(new_skb->data, skb->data, - ETH_HLEN); - memcpy(&new_skb->data[ETH_HLEN], - &skb->data[ETH_HLEN + - PCH_GBE_DMA_PADDING], - length - ETH_HLEN); - skb = new_skb; - } else { - /* Padding data is deleted - * by moving header data.*/ - memmove(&skb->data[PCH_GBE_DMA_PADDING], - &skb->data[0], ETH_HLEN); - skb_reserve(skb, NET_IP_ALIGN); - buffer_info->skb = NULL; - } - } - /* The length includes FCS length */ - length = length - ETH_FCS_LEN; + /* length convert[-3], length includes FCS length */ + length = (rx_desc->rx_words_eob) - 3 - ETH_FCS_LEN; + if (rx_desc->rx_words_eob & 0x02) + length = length - 4; + /* + * buffer_info->rx_buffer: [Header:14][payload] + * skb->data: [Reserve:2][Header:14][payload] + */ + memcpy(skb->data, buffer_info->rx_buffer, length); + /* update status of driver */ adapter->stats.rx_bytes += length; adapter->stats.rx_packets++; @@ -1509,7 +1554,6 @@ pch_gbe_clean_rx(struct pch_gbe_adapter *adapter, pr_debug("Receive skb->ip_summed: %d length: %d\n", skb->ip_summed, length); } -dorrop: /* return some buffers to hardware, one at a time is too slow */ if (unlikely(cleaned_count >= PCH_GBE_RX_BUFFER_WRITE)) { pch_gbe_alloc_rx_buffers(adapter, rx_ring, @@ -1714,9 +1758,15 @@ int pch_gbe_up(struct pch_gbe_adapter *adapter) pr_err("Error: can't bring device up\n"); return err; } + err = pch_gbe_alloc_rx_buffers_pool(adapter, rx_ring, rx_ring->count); + if (err) { + pr_err("Error: can't bring device up\n"); + return err; + } pch_gbe_alloc_tx_buffers(adapter, tx_ring); pch_gbe_alloc_rx_buffers(adapter, rx_ring, rx_ring->count); adapter->tx_queue_len = netdev->tx_queue_len; + pch_gbe_start_receive(&adapter->hw); mod_timer(&adapter->watchdog_timer, jiffies); @@ -1734,6 +1784,7 @@ int pch_gbe_up(struct pch_gbe_adapter *adapter) void pch_gbe_down(struct pch_gbe_adapter *adapter) { struct net_device *netdev = adapter->netdev; + struct pch_gbe_rx_ring *rx_ring = adapter->rx_ring; /* signal that we're down so the interrupt handler does not * reschedule our watchdog timer */ @@ -1752,6 +1803,12 @@ void pch_gbe_down(struct pch_gbe_adapter *adapter) pch_gbe_reset(adapter); pch_gbe_clean_tx_ring(adapter, adapter->tx_ring); pch_gbe_clean_rx_ring(adapter, adapter->rx_ring); + + pci_free_consistent(adapter->pdev, rx_ring->rx_buff_pool_size, + rx_ring->rx_buff_pool, rx_ring->rx_buff_pool_logic); + rx_ring->rx_buff_pool_logic = 0; + rx_ring->rx_buff_pool_size = 0; + rx_ring->rx_buff_pool = NULL; } /** @@ -2004,6 +2061,8 @@ static int pch_gbe_change_mtu(struct net_device *netdev, int new_mtu) { struct pch_gbe_adapter *adapter = netdev_priv(netdev); int max_frame; + unsigned long old_rx_buffer_len = adapter->rx_buffer_len; + int err; max_frame = new_mtu + ETH_HLEN + ETH_FCS_LEN; if ((max_frame < ETH_ZLEN + ETH_FCS_LEN) || @@ -2018,14 +2077,24 @@ static int pch_gbe_change_mtu(struct net_device *netdev, int new_mtu) else if (max_frame <= PCH_GBE_FRAME_SIZE_8192) adapter->rx_buffer_len = PCH_GBE_FRAME_SIZE_8192; else - adapter->rx_buffer_len = PCH_GBE_MAX_JUMBO_FRAME_SIZE; - netdev->mtu = new_mtu; - adapter->hw.mac.max_frame_size = max_frame; + adapter->rx_buffer_len = PCH_GBE_MAX_RX_BUFFER_SIZE; - if (netif_running(netdev)) - pch_gbe_reinit_locked(adapter); - else + if (netif_running(netdev)) { + pch_gbe_down(adapter); + err = pch_gbe_up(adapter); + if (err) { + adapter->rx_buffer_len = old_rx_buffer_len; + pch_gbe_up(adapter); + return -ENOMEM; + } else { + netdev->mtu = new_mtu; + adapter->hw.mac.max_frame_size = max_frame; + } + } else { pch_gbe_reset(adapter); + netdev->mtu = new_mtu; + adapter->hw.mac.max_frame_size = max_frame; + } pr_debug("max_frame : %d rx_buffer_len : %d mtu : %d max_frame_size : %d\n", max_frame, (u32) adapter->rx_buffer_len, netdev->mtu, @@ -2103,6 +2172,7 @@ static int pch_gbe_napi_poll(struct napi_struct *napi, int budget) int work_done = 0; bool poll_end_flag = false; bool cleaned = false; + u32 int_en; pr_debug("budget : %d\n", budget); @@ -2110,8 +2180,15 @@ static int pch_gbe_napi_poll(struct napi_struct *napi, int budget) if (!netif_carrier_ok(netdev)) { poll_end_flag = true; } else { - cleaned = pch_gbe_clean_tx(adapter, adapter->tx_ring); pch_gbe_clean_rx(adapter, adapter->rx_ring, &work_done, budget); + if (adapter->rx_stop_flag) { + adapter->rx_stop_flag = false; + pch_gbe_start_receive(&adapter->hw); + int_en = ioread32(&adapter->hw.reg->INT_EN); + iowrite32((int_en | PCH_GBE_INT_RX_FIFO_ERR), + &adapter->hw.reg->INT_EN); + } + cleaned = pch_gbe_clean_tx(adapter, adapter->tx_ring); if (cleaned) work_done = budget; @@ -2452,6 +2529,13 @@ static DEFINE_PCI_DEVICE_TABLE(pch_gbe_pcidev_id) = { .class = (PCI_CLASS_NETWORK_ETHERNET << 8), .class_mask = (0xFFFF00) }, + {.vendor = PCI_VENDOR_ID_ROHM, + .device = PCI_DEVICE_ID_ROHM_ML7831_GBE, + .subvendor = PCI_ANY_ID, + .subdevice = PCI_ANY_ID, + .class = (PCI_CLASS_NETWORK_ETHERNET << 8), + .class_mask = (0xFFFF00) + }, /* required last entry */ {0} }; diff --git a/drivers/net/ppp_generic.c b/drivers/net/ppp_generic.c index 10e5d98..edfa15d 100644 --- a/drivers/net/ppp_generic.c +++ b/drivers/net/ppp_generic.c @@ -1465,7 +1465,12 @@ static int ppp_mp_explode(struct ppp *ppp, struct sk_buff *skb) continue; } - mtu = pch->chan->mtu - hdrlen; + /* + * hdrlen includes the 2-byte PPP protocol field, but the + * MTU counts only the payload excluding the protocol field. + * (RFC1661 Section 2) + */ + mtu = pch->chan->mtu - (hdrlen - 2); if (mtu < 4) mtu = 4; if (flen > mtu) diff --git a/drivers/net/pxa168_eth.c b/drivers/net/pxa168_eth.c index 1a3033d..d17d062 100644 --- a/drivers/net/pxa168_eth.c +++ b/drivers/net/pxa168_eth.c @@ -40,6 +40,7 @@ #include <linux/clk.h> #include <linux/phy.h> #include <linux/io.h> +#include <linux/interrupt.h> #include <linux/types.h> #include <asm/pgtable.h> #include <asm/system.h> diff --git a/drivers/net/r8169.c b/drivers/net/r8169.c index 02339b3..c236670 100644 --- a/drivers/net/r8169.c +++ b/drivers/net/r8169.c @@ -407,6 +407,7 @@ enum rtl_register_content { RxOK = 0x0001, /* RxStatusDesc */ + RxBOVF = (1 << 24), RxFOVF = (1 << 23), RxRWT = (1 << 22), RxRES = (1 << 21), @@ -682,6 +683,7 @@ struct rtl8169_private { struct mii_if_info mii; struct rtl8169_counters counters; u32 saved_wolopts; + u32 opts1_mask; struct rtl_fw { const struct firmware *fw; @@ -710,6 +712,7 @@ MODULE_FIRMWARE(FIRMWARE_8168D_1); MODULE_FIRMWARE(FIRMWARE_8168D_2); MODULE_FIRMWARE(FIRMWARE_8168E_1); MODULE_FIRMWARE(FIRMWARE_8168E_2); +MODULE_FIRMWARE(FIRMWARE_8168E_3); MODULE_FIRMWARE(FIRMWARE_8105E_1); static int rtl8169_open(struct net_device *dev); @@ -3077,6 +3080,14 @@ static void rtl8169_phy_reset(struct net_device *dev, netif_err(tp, link, dev, "PHY reset failed\n"); } +static bool rtl_tbi_enabled(struct rtl8169_private *tp) +{ + void __iomem *ioaddr = tp->mmio_addr; + + return (tp->mac_version == RTL_GIGA_MAC_VER_01) && + (RTL_R8(PHYstatus) & TBI_Enable); +} + static void rtl8169_init_phy(struct net_device *dev, struct rtl8169_private *tp) { void __iomem *ioaddr = tp->mmio_addr; @@ -3109,7 +3120,7 @@ static void rtl8169_init_phy(struct net_device *dev, struct rtl8169_private *tp) ADVERTISED_1000baseT_Half | ADVERTISED_1000baseT_Full : 0)); - if (RTL_R8(PHYstatus) & TBI_Enable) + if (rtl_tbi_enabled(tp)) netif_info(tp, link, dev, "TBI auto-negotiating\n"); } @@ -3319,9 +3330,16 @@ static void r810x_phy_power_up(struct rtl8169_private *tp) static void r810x_pll_power_down(struct rtl8169_private *tp) { + void __iomem *ioaddr = tp->mmio_addr; + if (__rtl8169_get_wol(tp) & WAKE_ANY) { rtl_writephy(tp, 0x1f, 0x0000); rtl_writephy(tp, MII_BMCR, 0x0000); + + if (tp->mac_version == RTL_GIGA_MAC_VER_29 || + tp->mac_version == RTL_GIGA_MAC_VER_30) + RTL_W32(RxConfig, RTL_R32(RxConfig) | AcceptBroadcast | + AcceptMulticast | AcceptMyPhys); return; } @@ -3417,7 +3435,8 @@ static void r8168_pll_power_down(struct rtl8169_private *tp) rtl_writephy(tp, MII_BMCR, 0x0000); if (tp->mac_version == RTL_GIGA_MAC_VER_32 || - tp->mac_version == RTL_GIGA_MAC_VER_33) + tp->mac_version == RTL_GIGA_MAC_VER_33 || + tp->mac_version == RTL_GIGA_MAC_VER_34) RTL_W32(RxConfig, RTL_R32(RxConfig) | AcceptBroadcast | AcceptMulticast | AcceptMyPhys); return; @@ -3727,8 +3746,7 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) tp->features |= rtl_try_msi(pdev, ioaddr, cfg); RTL_W8(Cfg9346, Cfg9346_Lock); - if ((tp->mac_version <= RTL_GIGA_MAC_VER_06) && - (RTL_R8(PHYstatus) & TBI_Enable)) { + if (rtl_tbi_enabled(tp)) { tp->set_speed = rtl8169_set_speed_tbi; tp->get_settings = rtl8169_gset_tbi; tp->phy_reset_enable = rtl8169_tbi_reset_enable; @@ -3777,6 +3795,9 @@ rtl8169_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) tp->intr_event = cfg->intr_event; tp->napi_event = cfg->napi_event; + tp->opts1_mask = (tp->mac_version != RTL_GIGA_MAC_VER_01) ? + ~(RxBOVF | RxFOVF) : ~0; + init_timer(&tp->timer); tp->timer.data = (unsigned long) dev; tp->timer.function = rtl8169_phy_timer; @@ -3988,6 +4009,7 @@ static void rtl8169_hw_reset(struct rtl8169_private *tp) while (RTL_R8(TxPoll) & NPQ) udelay(20); } else if (tp->mac_version == RTL_GIGA_MAC_VER_34) { + RTL_W8(ChipCmd, RTL_R8(ChipCmd) | StopReq); while (!(RTL_R32(TxConfig) & TXCFG_EMPTY)) udelay(100); } else { @@ -5314,7 +5336,7 @@ static int rtl8169_rx_interrupt(struct net_device *dev, u32 status; rmb(); - status = le32_to_cpu(desc->opts1); + status = le32_to_cpu(desc->opts1) & tp->opts1_mask; if (status & DescOwn) break; diff --git a/drivers/net/sfc/efx.c b/drivers/net/sfc/efx.c index faca764..b59abc7 100644 --- a/drivers/net/sfc/efx.c +++ b/drivers/net/sfc/efx.c @@ -1050,7 +1050,6 @@ static int efx_init_io(struct efx_nic *efx) { struct pci_dev *pci_dev = efx->pci_dev; dma_addr_t dma_mask = efx->type->max_dma_mask; - bool use_wc; int rc; netif_dbg(efx, probe, efx->net_dev, "initialising I/O\n"); @@ -1101,21 +1100,8 @@ static int efx_init_io(struct efx_nic *efx) rc = -EIO; goto fail3; } - - /* bug22643: If SR-IOV is enabled then tx push over a write combined - * mapping is unsafe. We need to disable write combining in this case. - * MSI is unsupported when SR-IOV is enabled, and the firmware will - * have removed the MSI capability. So write combining is safe if - * there is an MSI capability. - */ - use_wc = (!EFX_WORKAROUND_22643(efx) || - pci_find_capability(pci_dev, PCI_CAP_ID_MSI)); - if (use_wc) - efx->membase = ioremap_wc(efx->membase_phys, - efx->type->mem_map_size); - else - efx->membase = ioremap_nocache(efx->membase_phys, - efx->type->mem_map_size); + efx->membase = ioremap_nocache(efx->membase_phys, + efx->type->mem_map_size); if (!efx->membase) { netif_err(efx, probe, efx->net_dev, "could not map memory BAR at %llx+%x\n", diff --git a/drivers/net/sfc/io.h b/drivers/net/sfc/io.h index cc97880..751d1ec 100644 --- a/drivers/net/sfc/io.h +++ b/drivers/net/sfc/io.h @@ -103,7 +103,6 @@ static inline void efx_writeo(struct efx_nic *efx, efx_oword_t *value, _efx_writed(efx, value->u32[2], reg + 8); _efx_writed(efx, value->u32[3], reg + 12); #endif - wmb(); mmiowb(); spin_unlock_irqrestore(&efx->biu_lock, flags); } @@ -126,7 +125,6 @@ static inline void efx_sram_writeq(struct efx_nic *efx, void __iomem *membase, __raw_writel((__force u32)value->u32[0], membase + addr); __raw_writel((__force u32)value->u32[1], membase + addr + 4); #endif - wmb(); mmiowb(); spin_unlock_irqrestore(&efx->biu_lock, flags); } @@ -141,7 +139,6 @@ static inline void efx_writed(struct efx_nic *efx, efx_dword_t *value, /* No lock required */ _efx_writed(efx, value->u32[0], reg); - wmb(); } /* Read a 128-bit CSR, locking as appropriate. */ @@ -152,7 +149,6 @@ static inline void efx_reado(struct efx_nic *efx, efx_oword_t *value, spin_lock_irqsave(&efx->biu_lock, flags); value->u32[0] = _efx_readd(efx, reg + 0); - rmb(); value->u32[1] = _efx_readd(efx, reg + 4); value->u32[2] = _efx_readd(efx, reg + 8); value->u32[3] = _efx_readd(efx, reg + 12); @@ -175,7 +171,6 @@ static inline void efx_sram_readq(struct efx_nic *efx, void __iomem *membase, value->u64[0] = (__force __le64)__raw_readq(membase + addr); #else value->u32[0] = (__force __le32)__raw_readl(membase + addr); - rmb(); value->u32[1] = (__force __le32)__raw_readl(membase + addr + 4); #endif spin_unlock_irqrestore(&efx->biu_lock, flags); @@ -249,7 +244,6 @@ static inline void _efx_writeo_page(struct efx_nic *efx, efx_oword_t *value, _efx_writed(efx, value->u32[2], reg + 8); _efx_writed(efx, value->u32[3], reg + 12); #endif - wmb(); } #define efx_writeo_page(efx, value, reg, page) \ _efx_writeo_page(efx, value, \ diff --git a/drivers/net/sfc/mcdi.c b/drivers/net/sfc/mcdi.c index 3dd45ed..81a4253 100644 --- a/drivers/net/sfc/mcdi.c +++ b/drivers/net/sfc/mcdi.c @@ -50,20 +50,6 @@ static inline struct efx_mcdi_iface *efx_mcdi(struct efx_nic *efx) return &nic_data->mcdi; } -static inline void -efx_mcdi_readd(struct efx_nic *efx, efx_dword_t *value, unsigned reg) -{ - struct siena_nic_data *nic_data = efx->nic_data; - value->u32[0] = (__force __le32)__raw_readl(nic_data->mcdi_smem + reg); -} - -static inline void -efx_mcdi_writed(struct efx_nic *efx, const efx_dword_t *value, unsigned reg) -{ - struct siena_nic_data *nic_data = efx->nic_data; - __raw_writel((__force u32)value->u32[0], nic_data->mcdi_smem + reg); -} - void efx_mcdi_init(struct efx_nic *efx) { struct efx_mcdi_iface *mcdi; @@ -84,8 +70,8 @@ static void efx_mcdi_copyin(struct efx_nic *efx, unsigned cmd, const u8 *inbuf, size_t inlen) { struct efx_mcdi_iface *mcdi = efx_mcdi(efx); - unsigned pdu = MCDI_PDU(efx); - unsigned doorbell = MCDI_DOORBELL(efx); + unsigned pdu = FR_CZ_MC_TREG_SMEM + MCDI_PDU(efx); + unsigned doorbell = FR_CZ_MC_TREG_SMEM + MCDI_DOORBELL(efx); unsigned int i; efx_dword_t hdr; u32 xflags, seqno; @@ -106,28 +92,29 @@ static void efx_mcdi_copyin(struct efx_nic *efx, unsigned cmd, MCDI_HEADER_SEQ, seqno, MCDI_HEADER_XFLAGS, xflags); - efx_mcdi_writed(efx, &hdr, pdu); + efx_writed(efx, &hdr, pdu); for (i = 0; i < inlen; i += 4) - efx_mcdi_writed(efx, (const efx_dword_t *)(inbuf + i), - pdu + 4 + i); + _efx_writed(efx, *((__le32 *)(inbuf + i)), pdu + 4 + i); + + /* Ensure the payload is written out before the header */ + wmb(); /* ring the doorbell with a distinctive value */ - EFX_POPULATE_DWORD_1(hdr, EFX_DWORD_0, 0x45789abc); - efx_mcdi_writed(efx, &hdr, doorbell); + _efx_writed(efx, (__force __le32) 0x45789abc, doorbell); } static void efx_mcdi_copyout(struct efx_nic *efx, u8 *outbuf, size_t outlen) { struct efx_mcdi_iface *mcdi = efx_mcdi(efx); - unsigned int pdu = MCDI_PDU(efx); + unsigned int pdu = FR_CZ_MC_TREG_SMEM + MCDI_PDU(efx); int i; BUG_ON(atomic_read(&mcdi->state) == MCDI_STATE_QUIESCENT); BUG_ON(outlen & 3 || outlen >= 0x100); for (i = 0; i < outlen; i += 4) - efx_mcdi_readd(efx, (efx_dword_t *)(outbuf + i), pdu + 4 + i); + *((__le32 *)(outbuf + i)) = _efx_readd(efx, pdu + 4 + i); } static int efx_mcdi_poll(struct efx_nic *efx) @@ -135,7 +122,7 @@ static int efx_mcdi_poll(struct efx_nic *efx) struct efx_mcdi_iface *mcdi = efx_mcdi(efx); unsigned int time, finish; unsigned int respseq, respcmd, error; - unsigned int pdu = MCDI_PDU(efx); + unsigned int pdu = FR_CZ_MC_TREG_SMEM + MCDI_PDU(efx); unsigned int rc, spins; efx_dword_t reg; @@ -161,7 +148,8 @@ static int efx_mcdi_poll(struct efx_nic *efx) time = get_seconds(); - efx_mcdi_readd(efx, ®, pdu); + rmb(); + efx_readd(efx, ®, pdu); /* All 1's indicates that shared memory is in reset (and is * not a valid header). Wait for it to come out reset before @@ -188,7 +176,7 @@ static int efx_mcdi_poll(struct efx_nic *efx) respseq, mcdi->seqno); rc = EIO; } else if (error) { - efx_mcdi_readd(efx, ®, pdu + 4); + efx_readd(efx, ®, pdu + 4); switch (EFX_DWORD_FIELD(reg, EFX_DWORD_0)) { #define TRANSLATE_ERROR(name) \ case MC_CMD_ERR_ ## name: \ @@ -222,21 +210,21 @@ out: /* Test and clear MC-rebooted flag for this port/function */ int efx_mcdi_poll_reboot(struct efx_nic *efx) { - unsigned int addr = MCDI_REBOOT_FLAG(efx); + unsigned int addr = FR_CZ_MC_TREG_SMEM + MCDI_REBOOT_FLAG(efx); efx_dword_t reg; uint32_t value; if (efx_nic_rev(efx) < EFX_REV_SIENA_A0) return false; - efx_mcdi_readd(efx, ®, addr); + efx_readd(efx, ®, addr); value = EFX_DWORD_FIELD(reg, EFX_DWORD_0); if (value == 0) return 0; EFX_ZERO_DWORD(reg); - efx_mcdi_writed(efx, ®, addr); + efx_writed(efx, ®, addr); if (value == MC_STATUS_DWORD_ASSERT) return -EINTR; diff --git a/drivers/net/sfc/nic.c b/drivers/net/sfc/nic.c index bafa23a..3edfbaf 100644 --- a/drivers/net/sfc/nic.c +++ b/drivers/net/sfc/nic.c @@ -1936,13 +1936,6 @@ void efx_nic_get_regs(struct efx_nic *efx, void *buf) size = min_t(size_t, table->step, 16); - if (table->offset >= efx->type->mem_map_size) { - /* No longer mapped; return dummy data */ - memcpy(buf, "\xde\xc0\xad\xde", 4); - buf += table->rows * size; - continue; - } - for (i = 0; i < table->rows; i++) { switch (table->step) { case 4: /* 32-bit register or SRAM */ diff --git a/drivers/net/sfc/nic.h b/drivers/net/sfc/nic.h index 4bd1f28..7443f99 100644 --- a/drivers/net/sfc/nic.h +++ b/drivers/net/sfc/nic.h @@ -143,12 +143,10 @@ static inline struct falcon_board *falcon_board(struct efx_nic *efx) /** * struct siena_nic_data - Siena NIC state * @mcdi: Management-Controller-to-Driver Interface - * @mcdi_smem: MCDI shared memory mapping. The mapping is always uncacheable. * @wol_filter_id: Wake-on-LAN packet filter id */ struct siena_nic_data { struct efx_mcdi_iface mcdi; - void __iomem *mcdi_smem; int wol_filter_id; }; diff --git a/drivers/net/sfc/siena.c b/drivers/net/sfc/siena.c index 5735e84..2c3bd93 100644 --- a/drivers/net/sfc/siena.c +++ b/drivers/net/sfc/siena.c @@ -250,26 +250,12 @@ static int siena_probe_nic(struct efx_nic *efx) efx_reado(efx, ®, FR_AZ_CS_DEBUG); efx->net_dev->dev_id = EFX_OWORD_FIELD(reg, FRF_CZ_CS_PORT_NUM) - 1; - /* Initialise MCDI */ - nic_data->mcdi_smem = ioremap_nocache(efx->membase_phys + - FR_CZ_MC_TREG_SMEM, - FR_CZ_MC_TREG_SMEM_STEP * - FR_CZ_MC_TREG_SMEM_ROWS); - if (!nic_data->mcdi_smem) { - netif_err(efx, probe, efx->net_dev, - "could not map MCDI at %llx+%x\n", - (unsigned long long)efx->membase_phys + - FR_CZ_MC_TREG_SMEM, - FR_CZ_MC_TREG_SMEM_STEP * FR_CZ_MC_TREG_SMEM_ROWS); - rc = -ENOMEM; - goto fail1; - } efx_mcdi_init(efx); /* Recover from a failed assertion before probing */ rc = efx_mcdi_handle_assertion(efx); if (rc) - goto fail2; + goto fail1; /* Let the BMC know that the driver is now in charge of link and * filter settings. We must do this before we reset the NIC */ @@ -324,7 +310,6 @@ fail4: fail3: efx_mcdi_drv_attach(efx, false, NULL); fail2: - iounmap(nic_data->mcdi_smem); fail1: kfree(efx->nic_data); return rc; @@ -404,8 +389,6 @@ static int siena_init_nic(struct efx_nic *efx) static void siena_remove_nic(struct efx_nic *efx) { - struct siena_nic_data *nic_data = efx->nic_data; - efx_nic_free_buffer(efx, &efx->irq_status); siena_reset_hw(efx, RESET_TYPE_ALL); @@ -415,8 +398,7 @@ static void siena_remove_nic(struct efx_nic *efx) efx_mcdi_drv_attach(efx, false, NULL); /* Tear down the private nic state */ - iounmap(nic_data->mcdi_smem); - kfree(nic_data); + kfree(efx->nic_data); efx->nic_data = NULL; } @@ -656,7 +638,8 @@ const struct efx_nic_type siena_a0_nic_type = { .default_mac_ops = &efx_mcdi_mac_operations, .revision = EFX_REV_SIENA_A0, - .mem_map_size = FR_CZ_MC_TREG_SMEM, /* MC_TREG_SMEM mapped separately */ + .mem_map_size = (FR_CZ_MC_TREG_SMEM + + FR_CZ_MC_TREG_SMEM_STEP * FR_CZ_MC_TREG_SMEM_ROWS), .txd_ptr_tbl_base = FR_BZ_TX_DESC_PTR_TBL, .rxd_ptr_tbl_base = FR_BZ_RX_DESC_PTR_TBL, .buf_tbl_base = FR_BZ_BUF_FULL_TBL, diff --git a/drivers/net/sfc/workarounds.h b/drivers/net/sfc/workarounds.h index 99ff114..e4dd3a7 100644 --- a/drivers/net/sfc/workarounds.h +++ b/drivers/net/sfc/workarounds.h @@ -38,8 +38,6 @@ #define EFX_WORKAROUND_15783 EFX_WORKAROUND_ALWAYS /* Legacy interrupt storm when interrupt fifo fills */ #define EFX_WORKAROUND_17213 EFX_WORKAROUND_SIENA -/* Write combining and sriov=enabled are incompatible */ -#define EFX_WORKAROUND_22643 EFX_WORKAROUND_SIENA /* Spurious parity errors in TSORT buffers */ #define EFX_WORKAROUND_5129 EFX_WORKAROUND_FALCON_A diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index dc3fbf6..4a1374d 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -6234,12 +6234,10 @@ static netdev_tx_t tg3_start_xmit(struct sk_buff *skb, struct net_device *dev) } } -#ifdef BCM_KERNEL_SUPPORTS_8021Q if (vlan_tx_tag_present(skb)) { base_flags |= TXD_FLAG_VLAN; vlan = vlan_tx_tag_get(skb); } -#endif if (tg3_flag(tp, USE_JUMBO_BDFLAG) && !mss && skb->len > VLAN_ETH_FRAME_LEN) diff --git a/drivers/net/usb/ipheth.c b/drivers/net/usb/ipheth.c index 15772b1..13c1f04 100644 --- a/drivers/net/usb/ipheth.c +++ b/drivers/net/usb/ipheth.c @@ -59,6 +59,7 @@ #define USB_PRODUCT_IPHONE_3G 0x1292 #define USB_PRODUCT_IPHONE_3GS 0x1294 #define USB_PRODUCT_IPHONE_4 0x1297 +#define USB_PRODUCT_IPHONE_4_VZW 0x129c #define IPHETH_USBINTF_CLASS 255 #define IPHETH_USBINTF_SUBCLASS 253 @@ -98,6 +99,10 @@ static struct usb_device_id ipheth_table[] = { USB_VENDOR_APPLE, USB_PRODUCT_IPHONE_4, IPHETH_USBINTF_CLASS, IPHETH_USBINTF_SUBCLASS, IPHETH_USBINTF_PROTO) }, + { USB_DEVICE_AND_INTERFACE_INFO( + USB_VENDOR_APPLE, USB_PRODUCT_IPHONE_4_VZW, + IPHETH_USBINTF_CLASS, IPHETH_USBINTF_SUBCLASS, + IPHETH_USBINTF_PROTO) }, { } }; MODULE_DEVICE_TABLE(usb, ipheth_table); diff --git a/drivers/net/wireless/ath/ath9k/ar9002_calib.c b/drivers/net/wireless/ath/ath9k/ar9002_calib.c index 2d4c091..2d394af 100644 --- a/drivers/net/wireless/ath/ath9k/ar9002_calib.c +++ b/drivers/net/wireless/ath/ath9k/ar9002_calib.c @@ -41,7 +41,8 @@ static bool ar9002_hw_is_cal_supported(struct ath_hw *ah, case ADC_DC_CAL: /* Run ADC Gain Cal for non-CCK & non 2GHz-HT20 only */ if (!IS_CHAN_B(chan) && - !(IS_CHAN_2GHZ(chan) && IS_CHAN_HT20(chan))) + !((IS_CHAN_2GHZ(chan) || IS_CHAN_A_FAST_CLOCK(ah, chan)) && + IS_CHAN_HT20(chan))) supported = true; break; } diff --git a/drivers/net/wireless/ath/ath9k/ar9003_phy.c b/drivers/net/wireless/ath/ath9k/ar9003_phy.c index 1baca8e..fcafec0 100644 --- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c @@ -671,7 +671,7 @@ static int ar9003_hw_process_ini(struct ath_hw *ah, REG_WRITE_ARRAY(&ah->iniModesAdditional, modesIndex, regWrites); - if (AR_SREV_9300(ah)) + if (AR_SREV_9330(ah)) REG_WRITE_ARRAY(&ah->iniModesAdditional, 1, regWrites); if (AR_SREV_9340(ah) && !ah->is_clk_25mhz) diff --git a/drivers/net/wireless/ath/ath9k/main.c b/drivers/net/wireless/ath/ath9k/main.c index 6530694..722967b 100644 --- a/drivers/net/wireless/ath/ath9k/main.c +++ b/drivers/net/wireless/ath/ath9k/main.c @@ -2303,6 +2303,12 @@ static void ath9k_flush(struct ieee80211_hw *hw, bool drop) mutex_lock(&sc->mutex); cancel_delayed_work_sync(&sc->tx_complete_work); + if (ah->ah_flags & AH_UNPLUGGED) { + ath_dbg(common, ATH_DBG_ANY, "Device has been unplugged!\n"); + mutex_unlock(&sc->mutex); + return; + } + if (sc->sc_flags & SC_OP_INVALID) { ath_dbg(common, ATH_DBG_ANY, "Device not present\n"); mutex_unlock(&sc->mutex); diff --git a/drivers/net/wireless/b43/main.c b/drivers/net/wireless/b43/main.c index 26f1ab8..e293a79 100644 --- a/drivers/net/wireless/b43/main.c +++ b/drivers/net/wireless/b43/main.c @@ -1632,7 +1632,8 @@ static void handle_irq_beacon(struct b43_wldev *dev) u32 cmd, beacon0_valid, beacon1_valid; if (!b43_is_mode(wl, NL80211_IFTYPE_AP) && - !b43_is_mode(wl, NL80211_IFTYPE_MESH_POINT)) + !b43_is_mode(wl, NL80211_IFTYPE_MESH_POINT) && + !b43_is_mode(wl, NL80211_IFTYPE_ADHOC)) return; /* This is the bottom half of the asynchronous beacon update. */ diff --git a/drivers/net/wireless/ipw2x00/ipw2100.c b/drivers/net/wireless/ipw2x00/ipw2100.c index 3774dd0..ef9ad79 100644 --- a/drivers/net/wireless/ipw2x00/ipw2100.c +++ b/drivers/net/wireless/ipw2x00/ipw2100.c @@ -1903,15 +1903,17 @@ static void ipw2100_down(struct ipw2100_priv *priv) static int ipw2100_net_init(struct net_device *dev) { struct ipw2100_priv *priv = libipw_priv(dev); + + return ipw2100_up(priv, 1); +} + +static int ipw2100_wdev_init(struct net_device *dev) +{ + struct ipw2100_priv *priv = libipw_priv(dev); const struct libipw_geo *geo = libipw_get_geo(priv->ieee); struct wireless_dev *wdev = &priv->ieee->wdev; - int ret; int i; - ret = ipw2100_up(priv, 1); - if (ret) - return ret; - memcpy(wdev->wiphy->perm_addr, priv->mac_addr, ETH_ALEN); /* fill-out priv->ieee->bg_band */ @@ -6350,9 +6352,13 @@ static int ipw2100_pci_init_one(struct pci_dev *pci_dev, "Error calling register_netdev.\n"); goto fail; } + registered = 1; + + err = ipw2100_wdev_init(dev); + if (err) + goto fail; mutex_lock(&priv->action_mutex); - registered = 1; IPW_DEBUG_INFO("%s: Bound to %s\n", dev->name, pci_name(pci_dev)); @@ -6389,7 +6395,8 @@ static int ipw2100_pci_init_one(struct pci_dev *pci_dev, fail_unlock: mutex_unlock(&priv->action_mutex); - + wiphy_unregister(priv->ieee->wdev.wiphy); + kfree(priv->ieee->bg_band.channels); fail: if (dev) { if (registered) diff --git a/drivers/net/wireless/ipw2x00/ipw2200.c b/drivers/net/wireless/ipw2x00/ipw2200.c index 87813c3..4ffebed 100644 --- a/drivers/net/wireless/ipw2x00/ipw2200.c +++ b/drivers/net/wireless/ipw2x00/ipw2200.c @@ -11425,16 +11425,23 @@ static void ipw_bg_down(struct work_struct *work) /* Called by register_netdev() */ static int ipw_net_init(struct net_device *dev) { + int rc = 0; + struct ipw_priv *priv = libipw_priv(dev); + + mutex_lock(&priv->mutex); + if (ipw_up(priv)) + rc = -EIO; + mutex_unlock(&priv->mutex); + + return rc; +} + +static int ipw_wdev_init(struct net_device *dev) +{ int i, rc = 0; struct ipw_priv *priv = libipw_priv(dev); const struct libipw_geo *geo = libipw_get_geo(priv->ieee); struct wireless_dev *wdev = &priv->ieee->wdev; - mutex_lock(&priv->mutex); - - if (ipw_up(priv)) { - rc = -EIO; - goto out; - } memcpy(wdev->wiphy->perm_addr, priv->mac_addr, ETH_ALEN); @@ -11519,13 +11526,9 @@ static int ipw_net_init(struct net_device *dev) set_wiphy_dev(wdev->wiphy, &priv->pci_dev->dev); /* With that information in place, we can now register the wiphy... */ - if (wiphy_register(wdev->wiphy)) { + if (wiphy_register(wdev->wiphy)) rc = -EIO; - goto out; - } - out: - mutex_unlock(&priv->mutex); return rc; } @@ -11832,14 +11835,22 @@ static int __devinit ipw_pci_probe(struct pci_dev *pdev, goto out_remove_sysfs; } + err = ipw_wdev_init(net_dev); + if (err) { + IPW_ERROR("failed to register wireless device\n"); + goto out_unregister_netdev; + } + #ifdef CONFIG_IPW2200_PROMISCUOUS if (rtap_iface) { err = ipw_prom_alloc(priv); if (err) { IPW_ERROR("Failed to register promiscuous network " "device (error %d).\n", err); - unregister_netdev(priv->net_dev); - goto out_remove_sysfs; + wiphy_unregister(priv->ieee->wdev.wiphy); + kfree(priv->ieee->a_band.channels); + kfree(priv->ieee->bg_band.channels); + goto out_unregister_netdev; } } #endif @@ -11851,6 +11862,8 @@ static int __devinit ipw_pci_probe(struct pci_dev *pdev, return 0; + out_unregister_netdev: + unregister_netdev(priv->net_dev); out_remove_sysfs: sysfs_remove_group(&pdev->dev.kobj, &ipw_attribute_group); out_release_irq: diff --git a/drivers/net/wireless/iwlegacy/iwl-3945-rs.c b/drivers/net/wireless/iwlegacy/iwl-3945-rs.c index 977bd24..164bcae 100644 --- a/drivers/net/wireless/iwlegacy/iwl-3945-rs.c +++ b/drivers/net/wireless/iwlegacy/iwl-3945-rs.c @@ -822,12 +822,15 @@ static void iwl3945_rs_get_rate(void *priv_r, struct ieee80211_sta *sta, out: - rs_sta->last_txrate_idx = index; - if (sband->band == IEEE80211_BAND_5GHZ) - info->control.rates[0].idx = rs_sta->last_txrate_idx - - IWL_FIRST_OFDM_RATE; - else + if (sband->band == IEEE80211_BAND_5GHZ) { + if (WARN_ON_ONCE(index < IWL_FIRST_OFDM_RATE)) + index = IWL_FIRST_OFDM_RATE; + rs_sta->last_txrate_idx = index; + info->control.rates[0].idx = index - IWL_FIRST_OFDM_RATE; + } else { + rs_sta->last_txrate_idx = index; info->control.rates[0].idx = rs_sta->last_txrate_idx; + } IWL_DEBUG_RATE(priv, "leave: %d\n", index); } diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-ucode.c b/drivers/net/wireless/iwlwifi/iwl-agn-ucode.c index a895a09..5621100 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-ucode.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-ucode.c @@ -167,7 +167,7 @@ static int iwlagn_set_temperature_offset_calib(struct iwl_priv *priv) memset(&cmd, 0, sizeof(cmd)); iwl_set_calib_hdr(&cmd.hdr, IWL_PHY_CALIBRATE_TEMP_OFFSET_CMD); - memcpy(&cmd.radio_sensor_offset, offset_calib, sizeof(offset_calib)); + memcpy(&cmd.radio_sensor_offset, offset_calib, sizeof(*offset_calib)); if (!(cmd.radio_sensor_offset)) cmd.radio_sensor_offset = DEFAULT_RADIO_SENSOR_OFFSET; diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index b0ae4de..f9c3cd9 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -2140,7 +2140,12 @@ static int iwl_mac_setup_register(struct iwl_priv *priv, IEEE80211_HW_SPECTRUM_MGMT | IEEE80211_HW_REPORTS_TX_ACK_STATUS; + /* + * Including the following line will crash some AP's. This + * workaround removes the stimulus which causes the crash until + * the AP software can be fixed. hw->max_tx_aggregation_subframes = LINK_QUAL_AGG_FRAME_LIMIT_DEF; + */ hw->flags |= IEEE80211_HW_SUPPORTS_PS | IEEE80211_HW_SUPPORTS_DYNAMIC_PS; diff --git a/drivers/net/wireless/iwlwifi/iwl-trans-tx-pcie.c b/drivers/net/wireless/iwlwifi/iwl-trans-tx-pcie.c index a6b2b1d..222d410 100644 --- a/drivers/net/wireless/iwlwifi/iwl-trans-tx-pcie.c +++ b/drivers/net/wireless/iwlwifi/iwl-trans-tx-pcie.c @@ -771,6 +771,8 @@ void iwl_tx_cmd_complete(struct iwl_priv *priv, struct iwl_rx_mem_buffer *rxb) cmd = txq->cmd[cmd_index]; meta = &txq->meta[cmd_index]; + txq->time_stamp = jiffies; + iwlagn_unmap_tfd(priv, meta, &txq->tfds[index], DMA_BIDIRECTIONAL); /* Input error checking is done when commands are added to queue. */ diff --git a/drivers/net/wireless/rt2x00/rt2800lib.c b/drivers/net/wireless/rt2x00/rt2800lib.c index ef67f67..0019dfd 100644 --- a/drivers/net/wireless/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/rt2x00/rt2800lib.c @@ -3697,14 +3697,15 @@ static void rt2800_efuse_read(struct rt2x00_dev *rt2x00dev, unsigned int i) rt2800_regbusy_read(rt2x00dev, EFUSE_CTRL, EFUSE_CTRL_KICK, ®); /* Apparently the data is read from end to start */ - rt2800_register_read_lock(rt2x00dev, EFUSE_DATA3, - (u32 *)&rt2x00dev->eeprom[i]); - rt2800_register_read_lock(rt2x00dev, EFUSE_DATA2, - (u32 *)&rt2x00dev->eeprom[i + 2]); - rt2800_register_read_lock(rt2x00dev, EFUSE_DATA1, - (u32 *)&rt2x00dev->eeprom[i + 4]); - rt2800_register_read_lock(rt2x00dev, EFUSE_DATA0, - (u32 *)&rt2x00dev->eeprom[i + 6]); + rt2800_register_read_lock(rt2x00dev, EFUSE_DATA3, ®); + /* The returned value is in CPU order, but eeprom is le */ + rt2x00dev->eeprom[i] = cpu_to_le32(reg); + rt2800_register_read_lock(rt2x00dev, EFUSE_DATA2, ®); + *(u32 *)&rt2x00dev->eeprom[i + 2] = cpu_to_le32(reg); + rt2800_register_read_lock(rt2x00dev, EFUSE_DATA1, ®); + *(u32 *)&rt2x00dev->eeprom[i + 4] = cpu_to_le32(reg); + rt2800_register_read_lock(rt2x00dev, EFUSE_DATA0, ®); + *(u32 *)&rt2x00dev->eeprom[i + 6] = cpu_to_le32(reg); mutex_unlock(&rt2x00dev->csr_mutex); } @@ -3870,19 +3871,23 @@ int rt2800_init_eeprom(struct rt2x00_dev *rt2x00dev) return -ENODEV; } - if (!rt2x00_rf(rt2x00dev, RF2820) && - !rt2x00_rf(rt2x00dev, RF2850) && - !rt2x00_rf(rt2x00dev, RF2720) && - !rt2x00_rf(rt2x00dev, RF2750) && - !rt2x00_rf(rt2x00dev, RF3020) && - !rt2x00_rf(rt2x00dev, RF2020) && - !rt2x00_rf(rt2x00dev, RF3021) && - !rt2x00_rf(rt2x00dev, RF3022) && - !rt2x00_rf(rt2x00dev, RF3052) && - !rt2x00_rf(rt2x00dev, RF3320) && - !rt2x00_rf(rt2x00dev, RF5370) && - !rt2x00_rf(rt2x00dev, RF5390)) { - ERROR(rt2x00dev, "Invalid RF chipset detected.\n"); + switch (rt2x00dev->chip.rf) { + case RF2820: + case RF2850: + case RF2720: + case RF2750: + case RF3020: + case RF2020: + case RF3021: + case RF3022: + case RF3052: + case RF3320: + case RF5370: + case RF5390: + break; + default: + ERROR(rt2x00dev, "Invalid RF chipset 0x%x detected.\n", + rt2x00dev->chip.rf); return -ENODEV; } diff --git a/drivers/net/wireless/rtlwifi/core.c b/drivers/net/wireless/rtlwifi/core.c index 1bdc1aa..04c4e9e 100644 --- a/drivers/net/wireless/rtlwifi/core.c +++ b/drivers/net/wireless/rtlwifi/core.c @@ -610,6 +610,11 @@ static void rtl_op_bss_info_changed(struct ieee80211_hw *hw, mac->link_state = MAC80211_NOLINK; memset(mac->bssid, 0, 6); + + /* reset sec info */ + rtl_cam_reset_sec_info(hw); + + rtl_cam_reset_all_entry(hw); mac->vendor = PEER_UNKNOWN; RT_TRACE(rtlpriv, COMP_MAC80211, DBG_DMESG, @@ -1063,6 +1068,9 @@ static int rtl_op_set_key(struct ieee80211_hw *hw, enum set_key_cmd cmd, *or clear all entry here. */ rtl_cam_delete_one_entry(hw, mac_addr, key_idx); + + rtl_cam_reset_sec_info(hw); + break; default: RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, diff --git a/drivers/net/wireless/rtlwifi/rtl8192cu/trx.c b/drivers/net/wireless/rtlwifi/rtl8192cu/trx.c index 906e7aa..3e52a54 100644 --- a/drivers/net/wireless/rtlwifi/rtl8192cu/trx.c +++ b/drivers/net/wireless/rtlwifi/rtl8192cu/trx.c @@ -549,15 +549,16 @@ void rtl92cu_tx_fill_desc(struct ieee80211_hw *hw, (tcb_desc->rts_use_shortpreamble ? 1 : 0) : (tcb_desc->rts_use_shortgi ? 1 : 0))); if (mac->bw_40) { - if (tcb_desc->packet_bw) { + if (rate_flag & IEEE80211_TX_RC_DUP_DATA) { SET_TX_DESC_DATA_BW(txdesc, 1); SET_TX_DESC_DATA_SC(txdesc, 3); + } else if(rate_flag & IEEE80211_TX_RC_40_MHZ_WIDTH){ + SET_TX_DESC_DATA_BW(txdesc, 1); + SET_TX_DESC_DATA_SC(txdesc, mac->cur_40_prime_sc); } else { SET_TX_DESC_DATA_BW(txdesc, 0); - if (rate_flag & IEEE80211_TX_RC_DUP_DATA) - SET_TX_DESC_DATA_SC(txdesc, - mac->cur_40_prime_sc); - } + SET_TX_DESC_DATA_SC(txdesc, 0); + } } else { SET_TX_DESC_DATA_BW(txdesc, 0); SET_TX_DESC_DATA_SC(txdesc, 0); diff --git a/drivers/pci/probe.c b/drivers/pci/probe.c index b1187ff..f3f94a5 100644 --- a/drivers/pci/probe.c +++ b/drivers/pci/probe.c @@ -1351,7 +1351,8 @@ static int pcie_find_smpss(struct pci_dev *dev, void *data) * will occur as normal. */ if (dev->is_hotplug_bridge && (!list_is_singular(&dev->bus->devices) || - dev->bus->self->pcie_type != PCI_EXP_TYPE_ROOT_PORT)) + (dev->bus->self && + dev->bus->self->pcie_type != PCI_EXP_TYPE_ROOT_PORT))) *smpss = 0; if (*smpss > dev->pcie_mpss) diff --git a/drivers/rtc/rtc-imxdi.c b/drivers/rtc/rtc-imxdi.c index 2dd3c01..d93a960 100644 --- a/drivers/rtc/rtc-imxdi.c +++ b/drivers/rtc/rtc-imxdi.c @@ -35,6 +35,7 @@ #include <linux/module.h> #include <linux/platform_device.h> #include <linux/rtc.h> +#include <linux/sched.h> #include <linux/workqueue.h> /* DryIce Register Definitions */ diff --git a/drivers/rtc/rtc-s3c.c b/drivers/rtc/rtc-s3c.c index 4e7c04e..7639ab9 100644 --- a/drivers/rtc/rtc-s3c.c +++ b/drivers/rtc/rtc-s3c.c @@ -51,6 +51,27 @@ static enum s3c_cpu_type s3c_rtc_cpu_type; static DEFINE_SPINLOCK(s3c_rtc_pie_lock); +static void s3c_rtc_alarm_clk_enable(bool enable) +{ + static DEFINE_SPINLOCK(s3c_rtc_alarm_clk_lock); + static bool alarm_clk_enabled; + unsigned long irq_flags; + + spin_lock_irqsave(&s3c_rtc_alarm_clk_lock, irq_flags); + if (enable) { + if (!alarm_clk_enabled) { + clk_enable(rtc_clk); + alarm_clk_enabled = true; + } + } else { + if (alarm_clk_enabled) { + clk_disable(rtc_clk); + alarm_clk_enabled = false; + } + } + spin_unlock_irqrestore(&s3c_rtc_alarm_clk_lock, irq_flags); +} + /* IRQ Handlers */ static irqreturn_t s3c_rtc_alarmirq(int irq, void *id) @@ -64,6 +85,9 @@ static irqreturn_t s3c_rtc_alarmirq(int irq, void *id) writeb(S3C2410_INTP_ALM, s3c_rtc_base + S3C2410_INTP); clk_disable(rtc_clk); + + s3c_rtc_alarm_clk_enable(false); + return IRQ_HANDLED; } @@ -97,6 +121,8 @@ static int s3c_rtc_setaie(struct device *dev, unsigned int enabled) writeb(tmp, s3c_rtc_base + S3C2410_RTCALM); clk_disable(rtc_clk); + s3c_rtc_alarm_clk_enable(enabled); + return 0; } diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig index 8d9dae8..3878b73 100644 --- a/drivers/scsi/Kconfig +++ b/drivers/scsi/Kconfig @@ -837,6 +837,7 @@ config SCSI_ISCI # (temporary): known alpha quality driver depends on EXPERIMENTAL select SCSI_SAS_LIBSAS + select SCSI_SAS_HOST_SMP ---help--- This driver supports the 6Gb/s SAS capabilities of the storage control unit found in the Intel(R) C600 series chipset. diff --git a/drivers/scsi/bnx2i/bnx2i_hwi.c b/drivers/scsi/bnx2i/bnx2i_hwi.c index 9ae80cd..dba72a4 100644 --- a/drivers/scsi/bnx2i/bnx2i_hwi.c +++ b/drivers/scsi/bnx2i/bnx2i_hwi.c @@ -563,7 +563,7 @@ int bnx2i_send_iscsi_nopout(struct bnx2i_conn *bnx2i_conn, nopout_wqe->itt = ((u16)task->itt | (ISCSI_TASK_TYPE_MPATH << ISCSI_TMF_REQUEST_TYPE_SHIFT)); - nopout_wqe->ttt = nopout_hdr->ttt; + nopout_wqe->ttt = be32_to_cpu(nopout_hdr->ttt); nopout_wqe->flags = 0; if (!unsol) nopout_wqe->flags = ISCSI_NOP_OUT_REQUEST_LOCAL_COMPLETION; diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c index ba710e3..5d0e9a2 100644 --- a/drivers/scsi/fcoe/fcoe.c +++ b/drivers/scsi/fcoe/fcoe.c @@ -432,6 +432,8 @@ void fcoe_interface_cleanup(struct fcoe_interface *fcoe) u8 flogi_maddr[ETH_ALEN]; const struct net_device_ops *ops; + rtnl_lock(); + /* * Don't listen for Ethernet packets anymore. * synchronize_net() ensures that the packet handlers are not running @@ -461,6 +463,8 @@ void fcoe_interface_cleanup(struct fcoe_interface *fcoe) " specific feature for LLD.\n"); } + rtnl_unlock(); + /* Release the self-reference taken during fcoe_interface_create() */ fcoe_interface_put(fcoe); } @@ -1951,11 +1955,8 @@ static void fcoe_destroy_work(struct work_struct *work) fcoe_if_destroy(port->lport); /* Do not tear down the fcoe interface for NPIV port */ - if (!npiv) { - rtnl_lock(); + if (!npiv) fcoe_interface_cleanup(fcoe); - rtnl_unlock(); - } mutex_unlock(&fcoe_config_mutex); } @@ -2009,8 +2010,9 @@ static int fcoe_create(struct net_device *netdev, enum fip_state fip_mode) printk(KERN_ERR "fcoe: Failed to create interface (%s)\n", netdev->name); rc = -EIO; + rtnl_unlock(); fcoe_interface_cleanup(fcoe); - goto out_nodev; + goto out_nortnl; } /* Make this the "master" N_Port */ @@ -2027,6 +2029,7 @@ static int fcoe_create(struct net_device *netdev, enum fip_state fip_mode) out_nodev: rtnl_unlock(); +out_nortnl: mutex_unlock(&fcoe_config_mutex); return rc; } diff --git a/drivers/scsi/hpsa.c b/drivers/scsi/hpsa.c index ec61bdb..b200b73 100644 --- a/drivers/scsi/hpsa.c +++ b/drivers/scsi/hpsa.c @@ -676,6 +676,16 @@ static void hpsa_scsi_replace_entry(struct ctlr_info *h, int hostno, BUG_ON(entry < 0 || entry >= HPSA_MAX_SCSI_DEVS_PER_HBA); removed[*nremoved] = h->dev[entry]; (*nremoved)++; + + /* + * New physical devices won't have target/lun assigned yet + * so we need to preserve the values in the slot we are replacing. + */ + if (new_entry->target == -1) { + new_entry->target = h->dev[entry]->target; + new_entry->lun = h->dev[entry]->lun; + } + h->dev[entry] = new_entry; added[*nadded] = new_entry; (*nadded)++; @@ -1548,10 +1558,17 @@ static inline void hpsa_set_bus_target_lun(struct hpsa_scsi_dev_t *device, } static int hpsa_update_device_info(struct ctlr_info *h, - unsigned char scsi3addr[], struct hpsa_scsi_dev_t *this_device) + unsigned char scsi3addr[], struct hpsa_scsi_dev_t *this_device, + unsigned char *is_OBDR_device) { -#define OBDR_TAPE_INQ_SIZE 49 + +#define OBDR_SIG_OFFSET 43 +#define OBDR_TAPE_SIG "$DR-10" +#define OBDR_SIG_LEN (sizeof(OBDR_TAPE_SIG) - 1) +#define OBDR_TAPE_INQ_SIZE (OBDR_SIG_OFFSET + OBDR_SIG_LEN) + unsigned char *inq_buff; + unsigned char *obdr_sig; inq_buff = kzalloc(OBDR_TAPE_INQ_SIZE, GFP_KERNEL); if (!inq_buff) @@ -1583,6 +1600,16 @@ static int hpsa_update_device_info(struct ctlr_info *h, else this_device->raid_level = RAID_UNKNOWN; + if (is_OBDR_device) { + /* See if this is a One-Button-Disaster-Recovery device + * by looking for "$DR-10" at offset 43 in inquiry data. + */ + obdr_sig = &inq_buff[OBDR_SIG_OFFSET]; + *is_OBDR_device = (this_device->devtype == TYPE_ROM && + strncmp(obdr_sig, OBDR_TAPE_SIG, + OBDR_SIG_LEN) == 0); + } + kfree(inq_buff); return 0; @@ -1716,7 +1743,7 @@ static int add_msa2xxx_enclosure_device(struct ctlr_info *h, return 0; } - if (hpsa_update_device_info(h, scsi3addr, this_device)) + if (hpsa_update_device_info(h, scsi3addr, this_device, NULL)) return 0; (*nmsa2xxx_enclosures)++; hpsa_set_bus_target_lun(this_device, bus, target, 0); @@ -1808,7 +1835,6 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno) */ struct ReportLUNdata *physdev_list = NULL; struct ReportLUNdata *logdev_list = NULL; - unsigned char *inq_buff = NULL; u32 nphysicals = 0; u32 nlogicals = 0; u32 ndev_allocated = 0; @@ -1824,11 +1850,9 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno) GFP_KERNEL); physdev_list = kzalloc(reportlunsize, GFP_KERNEL); logdev_list = kzalloc(reportlunsize, GFP_KERNEL); - inq_buff = kmalloc(OBDR_TAPE_INQ_SIZE, GFP_KERNEL); tmpdevice = kzalloc(sizeof(*tmpdevice), GFP_KERNEL); - if (!currentsd || !physdev_list || !logdev_list || - !inq_buff || !tmpdevice) { + if (!currentsd || !physdev_list || !logdev_list || !tmpdevice) { dev_err(&h->pdev->dev, "out of memory\n"); goto out; } @@ -1863,7 +1887,7 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno) /* adjust our table of devices */ nmsa2xxx_enclosures = 0; for (i = 0; i < nphysicals + nlogicals + 1; i++) { - u8 *lunaddrbytes; + u8 *lunaddrbytes, is_OBDR = 0; /* Figure out where the LUN ID info is coming from */ lunaddrbytes = figure_lunaddrbytes(h, raid_ctlr_position, @@ -1874,7 +1898,8 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno) continue; /* Get device type, vendor, model, device id */ - if (hpsa_update_device_info(h, lunaddrbytes, tmpdevice)) + if (hpsa_update_device_info(h, lunaddrbytes, tmpdevice, + &is_OBDR)) continue; /* skip it if we can't talk to it. */ figure_bus_target_lun(h, lunaddrbytes, &bus, &target, &lun, tmpdevice); @@ -1898,7 +1923,7 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno) hpsa_set_bus_target_lun(this_device, bus, target, lun); switch (this_device->devtype) { - case TYPE_ROM: { + case TYPE_ROM: /* We don't *really* support actual CD-ROM devices, * just "One Button Disaster Recovery" tape drive * which temporarily pretends to be a CD-ROM drive. @@ -1906,15 +1931,8 @@ static void hpsa_update_scsi_devices(struct ctlr_info *h, int hostno) * device by checking for "$DR-10" in bytes 43-48 of * the inquiry data. */ - char obdr_sig[7]; -#define OBDR_TAPE_SIG "$DR-10" - strncpy(obdr_sig, &inq_buff[43], 6); - obdr_sig[6] = '\0'; - if (strncmp(obdr_sig, OBDR_TAPE_SIG, 6) != 0) - /* Not OBDR device, ignore it. */ - break; - } - ncurrent++; + if (is_OBDR) + ncurrent++; break; case TYPE_DISK: if (i < nphysicals) @@ -1947,7 +1965,6 @@ out: for (i = 0; i < ndev_allocated; i++) kfree(currentsd[i]); kfree(currentsd); - kfree(inq_buff); kfree(physdev_list); kfree(logdev_list); } diff --git a/drivers/scsi/isci/host.c b/drivers/scsi/isci/host.c index 26072f1..6981b77 100644 --- a/drivers/scsi/isci/host.c +++ b/drivers/scsi/isci/host.c @@ -531,6 +531,9 @@ static void sci_controller_process_completions(struct isci_host *ihost) break; case SCU_COMPLETION_TYPE_EVENT: + sci_controller_event_completion(ihost, ent); + break; + case SCU_COMPLETION_TYPE_NOTIFY: { event_cycle ^= ((event_get+1) & SCU_MAX_EVENTS) << (SMU_COMPLETION_QUEUE_GET_EVENT_CYCLE_BIT_SHIFT - SCU_MAX_EVENTS_SHIFT); @@ -1091,6 +1094,7 @@ static void isci_host_completion_routine(unsigned long data) struct isci_request *request; struct isci_request *next_request; struct sas_task *task; + u16 active; INIT_LIST_HEAD(&completed_request_list); INIT_LIST_HEAD(&errored_request_list); @@ -1181,6 +1185,13 @@ static void isci_host_completion_routine(unsigned long data) } } + /* the coalesence timeout doubles at each encoding step, so + * update it based on the ilog2 value of the outstanding requests + */ + active = isci_tci_active(ihost); + writel(SMU_ICC_GEN_VAL(NUMBER, active) | + SMU_ICC_GEN_VAL(TIMER, ISCI_COALESCE_BASE + ilog2(active)), + &ihost->smu_registers->interrupt_coalesce_control); } /** @@ -1471,7 +1482,7 @@ static void sci_controller_ready_state_enter(struct sci_base_state_machine *sm) struct isci_host *ihost = container_of(sm, typeof(*ihost), sm); /* set the default interrupt coalescence number and timeout value. */ - sci_controller_set_interrupt_coalescence(ihost, 0x10, 250); + sci_controller_set_interrupt_coalescence(ihost, 0, 0); } static void sci_controller_ready_state_exit(struct sci_base_state_machine *sm) diff --git a/drivers/scsi/isci/host.h b/drivers/scsi/isci/host.h index 062101a..9f33831 100644 --- a/drivers/scsi/isci/host.h +++ b/drivers/scsi/isci/host.h @@ -369,6 +369,9 @@ static inline struct isci_host *dev_to_ihost(struct domain_device *dev) #define ISCI_TAG_SEQ(tag) (((tag) >> 12) & (SCI_MAX_SEQ-1)) #define ISCI_TAG_TCI(tag) ((tag) & (SCI_MAX_IO_REQUESTS-1)) +/* interrupt coalescing baseline: 9 == 3 to 5us interrupt delay per command */ +#define ISCI_COALESCE_BASE 9 + /* expander attached sata devices require 3 rnc slots */ static inline int sci_remote_device_node_count(struct isci_remote_device *idev) { diff --git a/drivers/scsi/isci/init.c b/drivers/scsi/isci/init.c index 61e0d09..29aa34e 100644 --- a/drivers/scsi/isci/init.c +++ b/drivers/scsi/isci/init.c @@ -59,10 +59,19 @@ #include <linux/firmware.h> #include <linux/efi.h> #include <asm/string.h> +#include <scsi/scsi_host.h> #include "isci.h" #include "task.h" #include "probe_roms.h" +#define MAJ 1 +#define MIN 0 +#define BUILD 0 +#define DRV_VERSION __stringify(MAJ) "." __stringify(MIN) "." \ + __stringify(BUILD) + +MODULE_VERSION(DRV_VERSION); + static struct scsi_transport_template *isci_transport_template; static DEFINE_PCI_DEVICE_TABLE(isci_id_table) = { @@ -113,6 +122,22 @@ unsigned char max_concurr_spinup = 1; module_param(max_concurr_spinup, byte, 0); MODULE_PARM_DESC(max_concurr_spinup, "Max concurrent device spinup"); +static ssize_t isci_show_id(struct device *dev, struct device_attribute *attr, char *buf) +{ + struct Scsi_Host *shost = container_of(dev, typeof(*shost), shost_dev); + struct sas_ha_struct *sas_ha = SHOST_TO_SAS_HA(shost); + struct isci_host *ihost = container_of(sas_ha, typeof(*ihost), sas_ha); + + return snprintf(buf, PAGE_SIZE, "%d\n", ihost->id); +} + +static DEVICE_ATTR(isci_id, S_IRUGO, isci_show_id, NULL); + +struct device_attribute *isci_host_attrs[] = { + &dev_attr_isci_id, + NULL +}; + static struct scsi_host_template isci_sht = { .module = THIS_MODULE, @@ -138,6 +163,7 @@ static struct scsi_host_template isci_sht = { .slave_alloc = sas_slave_alloc, .target_destroy = sas_target_destroy, .ioctl = sas_ioctl, + .shost_attrs = isci_host_attrs, }; static struct sas_domain_function_template isci_transport_ops = { @@ -232,17 +258,6 @@ static int isci_register_sas_ha(struct isci_host *isci_host) return 0; } -static ssize_t isci_show_id(struct device *dev, struct device_attribute *attr, char *buf) -{ - struct Scsi_Host *shost = container_of(dev, typeof(*shost), shost_dev); - struct sas_ha_struct *sas_ha = SHOST_TO_SAS_HA(shost); - struct isci_host *ihost = container_of(sas_ha, typeof(*ihost), sas_ha); - - return snprintf(buf, PAGE_SIZE, "%d\n", ihost->id); -} - -static DEVICE_ATTR(isci_id, S_IRUGO, isci_show_id, NULL); - static void isci_unregister(struct isci_host *isci_host) { struct Scsi_Host *shost; @@ -251,7 +266,6 @@ static void isci_unregister(struct isci_host *isci_host) return; shost = isci_host->shost; - device_remove_file(&shost->shost_dev, &dev_attr_isci_id); sas_unregister_ha(&isci_host->sas_ha); @@ -415,14 +429,8 @@ static struct isci_host *isci_host_alloc(struct pci_dev *pdev, int id) if (err) goto err_shost_remove; - err = device_create_file(&shost->shost_dev, &dev_attr_isci_id); - if (err) - goto err_unregister_ha; - return isci_host; - err_unregister_ha: - sas_unregister_ha(&(isci_host->sas_ha)); err_shost_remove: scsi_remove_host(shost); err_shost: @@ -540,7 +548,8 @@ static __init int isci_init(void) { int err; - pr_info("%s: Intel(R) C600 SAS Controller Driver\n", DRV_NAME); + pr_info("%s: Intel(R) C600 SAS Controller Driver - version %s\n", + DRV_NAME, DRV_VERSION); isci_transport_template = sas_domain_attach_transport(&isci_transport_ops); if (!isci_transport_template) diff --git a/drivers/scsi/isci/phy.c b/drivers/scsi/isci/phy.c index 79313a7..430fc8f 100644 --- a/drivers/scsi/isci/phy.c +++ b/drivers/scsi/isci/phy.c @@ -104,6 +104,7 @@ sci_phy_link_layer_initialization(struct isci_phy *iphy, u32 parity_count = 0; u32 llctl, link_rate; u32 clksm_value = 0; + u32 sp_timeouts = 0; iphy->link_layer_registers = reg; @@ -211,6 +212,18 @@ sci_phy_link_layer_initialization(struct isci_phy *iphy, llctl |= SCU_SAS_LLCTL_GEN_VAL(MAX_LINK_RATE, link_rate); writel(llctl, &iphy->link_layer_registers->link_layer_control); + sp_timeouts = readl(&iphy->link_layer_registers->sas_phy_timeouts); + + /* Clear the default 0x36 (54us) RATE_CHANGE timeout value. */ + sp_timeouts &= ~SCU_SAS_PHYTOV_GEN_VAL(RATE_CHANGE, 0xFF); + + /* Set RATE_CHANGE timeout value to 0x3B (59us). This ensures SCU can + * lock with 3Gb drive when SCU max rate is set to 1.5Gb. + */ + sp_timeouts |= SCU_SAS_PHYTOV_GEN_VAL(RATE_CHANGE, 0x3B); + + writel(sp_timeouts, &iphy->link_layer_registers->sas_phy_timeouts); + if (is_a2(ihost->pdev)) { /* Program the max ARB time for the PHY to 700us so we inter-operate with * the PMC expander which shuts down PHYs if the expander PHY generates too diff --git a/drivers/scsi/isci/registers.h b/drivers/scsi/isci/registers.h index 9b266c7..00afc73 100644 --- a/drivers/scsi/isci/registers.h +++ b/drivers/scsi/isci/registers.h @@ -1299,6 +1299,18 @@ struct scu_transport_layer_registers { #define SCU_AFE_XCVRCR_OFFSET 0x00DC #define SCU_AFE_LUTCR_OFFSET 0x00E0 +#define SCU_SAS_PHY_TIMER_TIMEOUT_VALUES_ALIGN_DETECTION_SHIFT (0UL) +#define SCU_SAS_PHY_TIMER_TIMEOUT_VALUES_ALIGN_DETECTION_MASK (0x000000FFUL) +#define SCU_SAS_PHY_TIMER_TIMEOUT_VALUES_HOT_PLUG_SHIFT (8UL) +#define SCU_SAS_PHY_TIMER_TIMEOUT_VALUES_HOT_PLUG_MASK (0x0000FF00UL) +#define SCU_SAS_PHY_TIMER_TIMEOUT_VALUES_COMSAS_DETECTION_SHIFT (16UL) +#define SCU_SAS_PHY_TIMER_TIMEOUT_VALUES_COMSAS_DETECTION_MASK (0x00FF0000UL) +#define SCU_SAS_PHY_TIMER_TIMEOUT_VALUES_RATE_CHANGE_SHIFT (24UL) +#define SCU_SAS_PHY_TIMER_TIMEOUT_VALUES_RATE_CHANGE_MASK (0xFF000000UL) + +#define SCU_SAS_PHYTOV_GEN_VAL(name, value) \ + SCU_GEN_VALUE(SCU_SAS_PHY_TIMER_TIMEOUT_VALUES_##name, value) + #define SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_SHIFT (0) #define SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_MASK (0x00000003) #define SCU_SAS_LINK_LAYER_CONTROL_MAX_LINK_RATE_GEN1 (0) diff --git a/drivers/scsi/isci/request.c b/drivers/scsi/isci/request.c index a46e07a..b5d3a8c 100644 --- a/drivers/scsi/isci/request.c +++ b/drivers/scsi/isci/request.c @@ -732,12 +732,20 @@ sci_io_request_terminate(struct isci_request *ireq) sci_change_state(&ireq->sm, SCI_REQ_ABORTING); return SCI_SUCCESS; case SCI_REQ_TASK_WAIT_TC_RESP: + /* The task frame was already confirmed to have been + * sent by the SCU HW. Since the state machine is + * now only waiting for the task response itself, + * abort the request and complete it immediately + * and don't wait for the task response. + */ sci_change_state(&ireq->sm, SCI_REQ_ABORTING); sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); return SCI_SUCCESS; case SCI_REQ_ABORTING: - sci_change_state(&ireq->sm, SCI_REQ_COMPLETED); - return SCI_SUCCESS; + /* If a request has a termination requested twice, return + * a failure indication, since HW confirmation of the first + * abort is still outstanding. + */ case SCI_REQ_COMPLETED: default: dev_warn(&ireq->owning_controller->pdev->dev, @@ -2399,22 +2407,19 @@ static void isci_task_save_for_upper_layer_completion( } } -static void isci_request_process_stp_response(struct sas_task *task, - void *response_buffer) +static void isci_process_stp_response(struct sas_task *task, struct dev_to_host_fis *fis) { - struct dev_to_host_fis *d2h_reg_fis = response_buffer; struct task_status_struct *ts = &task->task_status; struct ata_task_resp *resp = (void *)&ts->buf[0]; - resp->frame_len = le16_to_cpu(*(__le16 *)(response_buffer + 6)); - memcpy(&resp->ending_fis[0], response_buffer + 16, 24); + resp->frame_len = sizeof(*fis); + memcpy(resp->ending_fis, fis, sizeof(*fis)); ts->buf_valid_size = sizeof(*resp); - /** - * If the device fault bit is set in the status register, then + /* If the device fault bit is set in the status register, then * set the sense data and return. */ - if (d2h_reg_fis->status & ATA_DF) + if (fis->status & ATA_DF) ts->stat = SAS_PROTO_RESPONSE; else ts->stat = SAM_STAT_GOOD; @@ -2428,7 +2433,6 @@ static void isci_request_io_request_complete(struct isci_host *ihost, { struct sas_task *task = isci_request_access_task(request); struct ssp_response_iu *resp_iu; - void *resp_buf; unsigned long task_flags; struct isci_remote_device *idev = isci_lookup_device(task->dev); enum service_response response = SAS_TASK_UNDELIVERED; @@ -2565,9 +2569,7 @@ static void isci_request_io_request_complete(struct isci_host *ihost, task); if (sas_protocol_ata(task->task_proto)) { - resp_buf = &request->stp.rsp; - isci_request_process_stp_response(task, - resp_buf); + isci_process_stp_response(task, &request->stp.rsp); } else if (SAS_PROTOCOL_SSP == task->task_proto) { /* crack the iu response buffer. */ diff --git a/drivers/scsi/isci/unsolicited_frame_control.c b/drivers/scsi/isci/unsolicited_frame_control.c index e9e1e2a..16f88ab 100644 --- a/drivers/scsi/isci/unsolicited_frame_control.c +++ b/drivers/scsi/isci/unsolicited_frame_control.c @@ -72,7 +72,7 @@ int sci_unsolicited_frame_control_construct(struct isci_host *ihost) */ buf_len = SCU_MAX_UNSOLICITED_FRAMES * SCU_UNSOLICITED_FRAME_BUFFER_SIZE; header_len = SCU_MAX_UNSOLICITED_FRAMES * sizeof(struct scu_unsolicited_frame_header); - size = buf_len + header_len + SCU_MAX_UNSOLICITED_FRAMES * sizeof(dma_addr_t); + size = buf_len + header_len + SCU_MAX_UNSOLICITED_FRAMES * sizeof(uf_control->address_table.array[0]); /* * The Unsolicited Frame buffers are set at the start of the UF diff --git a/drivers/scsi/isci/unsolicited_frame_control.h b/drivers/scsi/isci/unsolicited_frame_control.h index 31cb950..75d8966 100644 --- a/drivers/scsi/isci/unsolicited_frame_control.h +++ b/drivers/scsi/isci/unsolicited_frame_control.h @@ -214,7 +214,7 @@ struct sci_uf_address_table_array { * starting address of the UF address table. * 64-bit pointers are required by the hardware. */ - dma_addr_t *array; + u64 *array; /** * This field specifies the physical address location for the UF diff --git a/drivers/scsi/libfc/fc_exch.c b/drivers/scsi/libfc/fc_exch.c index 01ff082..d261e98 100644 --- a/drivers/scsi/libfc/fc_exch.c +++ b/drivers/scsi/libfc/fc_exch.c @@ -494,6 +494,9 @@ static int fc_seq_send(struct fc_lport *lport, struct fc_seq *sp, */ error = lport->tt.frame_send(lport, fp); + if (fh->fh_type == FC_TYPE_BLS) + return error; + /* * Update the exchange and sequence flags, * assuming all frames for the sequence have been sent. @@ -575,42 +578,35 @@ static void fc_seq_set_resp(struct fc_seq *sp, } /** - * fc_seq_exch_abort() - Abort an exchange and sequence - * @req_sp: The sequence to be aborted + * fc_exch_abort_locked() - Abort an exchange + * @ep: The exchange to be aborted * @timer_msec: The period of time to wait before aborting * - * Generally called because of a timeout or an abort from the upper layer. + * Locking notes: Called with exch lock held + * + * Return value: 0 on success else error code */ -static int fc_seq_exch_abort(const struct fc_seq *req_sp, - unsigned int timer_msec) +static int fc_exch_abort_locked(struct fc_exch *ep, + unsigned int timer_msec) { struct fc_seq *sp; - struct fc_exch *ep; struct fc_frame *fp; int error; - ep = fc_seq_exch(req_sp); - - spin_lock_bh(&ep->ex_lock); if (ep->esb_stat & (ESB_ST_COMPLETE | ESB_ST_ABNORMAL) || - ep->state & (FC_EX_DONE | FC_EX_RST_CLEANUP)) { - spin_unlock_bh(&ep->ex_lock); + ep->state & (FC_EX_DONE | FC_EX_RST_CLEANUP)) return -ENXIO; - } /* * Send the abort on a new sequence if possible. */ sp = fc_seq_start_next_locked(&ep->seq); - if (!sp) { - spin_unlock_bh(&ep->ex_lock); + if (!sp) return -ENOMEM; - } ep->esb_stat |= ESB_ST_SEQ_INIT | ESB_ST_ABNORMAL; if (timer_msec) fc_exch_timer_set_locked(ep, timer_msec); - spin_unlock_bh(&ep->ex_lock); /* * If not logged into the fabric, don't send ABTS but leave @@ -633,6 +629,28 @@ static int fc_seq_exch_abort(const struct fc_seq *req_sp, } /** + * fc_seq_exch_abort() - Abort an exchange and sequence + * @req_sp: The sequence to be aborted + * @timer_msec: The period of time to wait before aborting + * + * Generally called because of a timeout or an abort from the upper layer. + * + * Return value: 0 on success else error code + */ +static int fc_seq_exch_abort(const struct fc_seq *req_sp, + unsigned int timer_msec) +{ + struct fc_exch *ep; + int error; + + ep = fc_seq_exch(req_sp); + spin_lock_bh(&ep->ex_lock); + error = fc_exch_abort_locked(ep, timer_msec); + spin_unlock_bh(&ep->ex_lock); + return error; +} + +/** * fc_exch_timeout() - Handle exchange timer expiration * @work: The work_struct identifying the exchange that timed out */ @@ -1715,6 +1733,7 @@ static void fc_exch_reset(struct fc_exch *ep) int rc = 1; spin_lock_bh(&ep->ex_lock); + fc_exch_abort_locked(ep, 0); ep->state |= FC_EX_RST_CLEANUP; if (cancel_delayed_work(&ep->timeout_work)) atomic_dec(&ep->ex_refcnt); /* drop hold for timer */ @@ -1962,6 +1981,7 @@ static struct fc_seq *fc_exch_seq_send(struct fc_lport *lport, struct fc_exch *ep; struct fc_seq *sp = NULL; struct fc_frame_header *fh; + struct fc_fcp_pkt *fsp = NULL; int rc = 1; ep = fc_exch_alloc(lport, fp); @@ -1984,8 +2004,10 @@ static struct fc_seq *fc_exch_seq_send(struct fc_lport *lport, fc_exch_setup_hdr(ep, fp, ep->f_ctl); sp->cnt++; - if (ep->xid <= lport->lro_xid && fh->fh_r_ctl == FC_RCTL_DD_UNSOL_CMD) + if (ep->xid <= lport->lro_xid && fh->fh_r_ctl == FC_RCTL_DD_UNSOL_CMD) { + fsp = fr_fsp(fp); fc_fcp_ddp_setup(fr_fsp(fp), ep->xid); + } if (unlikely(lport->tt.frame_send(lport, fp))) goto err; @@ -1999,7 +2021,8 @@ static struct fc_seq *fc_exch_seq_send(struct fc_lport *lport, spin_unlock_bh(&ep->ex_lock); return sp; err: - fc_fcp_ddp_done(fr_fsp(fp)); + if (fsp) + fc_fcp_ddp_done(fsp); rc = fc_exch_done_locked(ep); spin_unlock_bh(&ep->ex_lock); if (!rc) diff --git a/drivers/scsi/libfc/fc_fcp.c b/drivers/scsi/libfc/fc_fcp.c index afb63c8..4c41ee8 100644 --- a/drivers/scsi/libfc/fc_fcp.c +++ b/drivers/scsi/libfc/fc_fcp.c @@ -2019,6 +2019,11 @@ int fc_eh_abort(struct scsi_cmnd *sc_cmd) struct fc_fcp_internal *si; int rc = FAILED; unsigned long flags; + int rval; + + rval = fc_block_scsi_eh(sc_cmd); + if (rval) + return rval; lport = shost_priv(sc_cmd->device->host); if (lport->state != LPORT_ST_READY) @@ -2068,9 +2073,9 @@ int fc_eh_device_reset(struct scsi_cmnd *sc_cmd) int rc = FAILED; int rval; - rval = fc_remote_port_chkready(rport); + rval = fc_block_scsi_eh(sc_cmd); if (rval) - goto out; + return rval; lport = shost_priv(sc_cmd->device->host); @@ -2116,6 +2121,8 @@ int fc_eh_host_reset(struct scsi_cmnd *sc_cmd) FC_SCSI_DBG(lport, "Resetting host\n"); + fc_block_scsi_eh(sc_cmd); + lport->tt.lport_reset(lport); wait_tmo = jiffies + FC_HOST_RESET_TIMEOUT; while (!fc_fcp_lport_queue_ready(lport) && time_before(jiffies, diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c index e55ed9c..628f347 100644 --- a/drivers/scsi/libfc/fc_lport.c +++ b/drivers/scsi/libfc/fc_lport.c @@ -88,6 +88,7 @@ */ #include <linux/timer.h> +#include <linux/delay.h> #include <linux/slab.h> #include <asm/unaligned.h> @@ -1029,8 +1030,16 @@ static void fc_lport_enter_reset(struct fc_lport *lport) FCH_EVT_LIPRESET, 0); fc_vports_linkchange(lport); fc_lport_reset_locked(lport); - if (lport->link_up) + if (lport->link_up) { + /* + * Wait upto resource allocation time out before + * doing re-login since incomplete FIP exchanged + * from last session may collide with exchanges + * in new session. + */ + msleep(lport->r_a_tov); fc_lport_enter_flogi(lport); + } } /** diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c index 7836eb0..a31e05f 100644 --- a/drivers/scsi/qla2xxx/qla_attr.c +++ b/drivers/scsi/qla2xxx/qla_attr.c @@ -1786,13 +1786,16 @@ qla24xx_vport_create(struct fc_vport *fc_vport, bool disable) fc_vport_set_state(fc_vport, FC_VPORT_LINKDOWN); } - if ((IS_QLA25XX(ha) || IS_QLA81XX(ha)) && ql2xenabledif) { + if (IS_T10_PI_CAPABLE(ha) && ql2xenabledif) { if (ha->fw_attributes & BIT_4) { + int prot = 0; vha->flags.difdix_supported = 1; ql_dbg(ql_dbg_user, vha, 0x7082, "Registered for DIF/DIX type 1 and 3 protection.\n"); + if (ql2xenabledif == 1) + prot = SHOST_DIX_TYPE0_PROTECTION; scsi_host_set_prot(vha->host, - SHOST_DIF_TYPE1_PROTECTION + prot | SHOST_DIF_TYPE1_PROTECTION | SHOST_DIF_TYPE2_PROTECTION | SHOST_DIF_TYPE3_PROTECTION | SHOST_DIX_TYPE1_PROTECTION diff --git a/drivers/scsi/qla2xxx/qla_dbg.c b/drivers/scsi/qla2xxx/qla_dbg.c index 2155071..d79cd8a 100644 --- a/drivers/scsi/qla2xxx/qla_dbg.c +++ b/drivers/scsi/qla2xxx/qla_dbg.c @@ -8,24 +8,24 @@ /* * Table for showing the current message id in use for particular level * Change this table for addition of log/debug messages. - * ----------------------------------------------------- - * | Level | Last Value Used | - * ----------------------------------------------------- - * | Module Init and Probe | 0x0116 | - * | Mailbox commands | 0x111e | - * | Device Discovery | 0x2083 | - * | Queue Command and IO tracing | 0x302e | - * | DPC Thread | 0x401c | - * | Async Events | 0x5059 | - * | Timer Routines | 0x600d | - * | User Space Interactions | 0x709c | - * | Task Management | 0x8043 | - * | AER/EEH | 0x900f | - * | Virtual Port | 0xa007 | - * | ISP82XX Specific | 0xb027 | - * | MultiQ | 0xc00b | - * | Misc | 0xd00b | - * ----------------------------------------------------- + * ---------------------------------------------------------------------- + * | Level | Last Value Used | Holes | + * ---------------------------------------------------------------------- + * | Module Init and Probe | 0x0116 | | + * | Mailbox commands | 0x1126 | | + * | Device Discovery | 0x2083 | | + * | Queue Command and IO tracing | 0x302e | 0x3008 | + * | DPC Thread | 0x401c | | + * | Async Events | 0x5059 | | + * | Timer Routines | 0x600d | | + * | User Space Interactions | 0x709d | | + * | Task Management | 0x8041 | | + * | AER/EEH | 0x900f | | + * | Virtual Port | 0xa007 | | + * | ISP82XX Specific | 0xb04f | | + * | MultiQ | 0xc00b | | + * | Misc | 0xd00b | | + * ---------------------------------------------------------------------- */ #include "qla_def.h" diff --git a/drivers/scsi/qla2xxx/qla_def.h b/drivers/scsi/qla2xxx/qla_def.h index cc5a792..a03eaf4 100644 --- a/drivers/scsi/qla2xxx/qla_def.h +++ b/drivers/scsi/qla2xxx/qla_def.h @@ -2529,6 +2529,7 @@ struct qla_hw_data { #define DT_ISP8021 BIT_14 #define DT_ISP_LAST (DT_ISP8021 << 1) +#define DT_T10_PI BIT_25 #define DT_IIDMA BIT_26 #define DT_FWI2 BIT_27 #define DT_ZIO_SUPPORTED BIT_28 @@ -2572,6 +2573,7 @@ struct qla_hw_data { #define IS_NOCACHE_VPD_TYPE(ha) (IS_QLA81XX(ha)) #define IS_ALOGIO_CAPABLE(ha) (IS_QLA23XX(ha) || IS_FWI2_CAPABLE(ha)) +#define IS_T10_PI_CAPABLE(ha) ((ha)->device_type & DT_T10_PI) #define IS_IIDMA_CAPABLE(ha) ((ha)->device_type & DT_IIDMA) #define IS_FWI2_CAPABLE(ha) ((ha)->device_type & DT_FWI2) #define IS_ZIO_SUPPORTED(ha) ((ha)->device_type & DT_ZIO_SUPPORTED) diff --git a/drivers/scsi/qla2xxx/qla_fw.h b/drivers/scsi/qla2xxx/qla_fw.h index 691783a..aa69486 100644 --- a/drivers/scsi/qla2xxx/qla_fw.h +++ b/drivers/scsi/qla2xxx/qla_fw.h @@ -537,6 +537,11 @@ struct sts_entry_24xx { /* * If DIF Error is set in comp_status, these additional fields are * defined: + * + * !!! NOTE: Firmware sends expected/actual DIF data in big endian + * format; but all of the "data" field gets swab32-d in the beginning + * of qla2x00_status_entry(). + * * &data[10] : uint8_t report_runt_bg[2]; - computed guard * &data[12] : uint8_t actual_dif[8]; - DIF Data received * &data[20] : uint8_t expected_dif[8]; - DIF Data computed diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index def6942..37da04d 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -3838,15 +3838,12 @@ qla2x00_loop_resync(scsi_qla_host_t *vha) req = vha->req; rsp = req->rsp; - atomic_set(&vha->loop_state, LOOP_UPDATE); clear_bit(ISP_ABORT_RETRY, &vha->dpc_flags); if (vha->flags.online) { if (!(rval = qla2x00_fw_ready(vha))) { /* Wait at most MAX_TARGET RSCNs for a stable link. */ wait_time = 256; do { - atomic_set(&vha->loop_state, LOOP_UPDATE); - /* Issue a marker after FW becomes ready. */ qla2x00_marker(vha, req, rsp, 0, 0, MK_SYNC_ALL); diff --git a/drivers/scsi/qla2xxx/qla_inline.h b/drivers/scsi/qla2xxx/qla_inline.h index d2e904b..9902834 100644 --- a/drivers/scsi/qla2xxx/qla_inline.h +++ b/drivers/scsi/qla2xxx/qla_inline.h @@ -102,3 +102,32 @@ qla2x00_set_fcport_state(fc_port_t *fcport, int state) fcport->d_id.b.al_pa); } } + +static inline int +qla2x00_hba_err_chk_enabled(srb_t *sp) +{ + /* + * Uncomment when corresponding SCSI changes are done. + * + if (!sp->cmd->prot_chk) + return 0; + * + */ + + switch (scsi_get_prot_op(sp->cmd)) { + case SCSI_PROT_READ_STRIP: + case SCSI_PROT_WRITE_INSERT: + if (ql2xenablehba_err_chk >= 1) + return 1; + break; + case SCSI_PROT_READ_PASS: + case SCSI_PROT_WRITE_PASS: + if (ql2xenablehba_err_chk >= 2) + return 1; + break; + case SCSI_PROT_READ_INSERT: + case SCSI_PROT_WRITE_STRIP: + return 1; + } + return 0; +} diff --git a/drivers/scsi/qla2xxx/qla_iocb.c b/drivers/scsi/qla2xxx/qla_iocb.c index 49d6906..dbec896 100644 --- a/drivers/scsi/qla2xxx/qla_iocb.c +++ b/drivers/scsi/qla2xxx/qla_iocb.c @@ -709,20 +709,28 @@ struct fw_dif_context { * */ static inline void -qla24xx_set_t10dif_tags(struct scsi_cmnd *cmd, struct fw_dif_context *pkt, +qla24xx_set_t10dif_tags(srb_t *sp, struct fw_dif_context *pkt, unsigned int protcnt) { - struct sd_dif_tuple *spt; + struct scsi_cmnd *cmd = sp->cmd; scsi_qla_host_t *vha = shost_priv(cmd->device->host); - unsigned char op = scsi_get_prot_op(cmd); switch (scsi_get_prot_type(cmd)) { - /* For TYPE 0 protection: no checking */ case SCSI_PROT_DIF_TYPE0: - pkt->ref_tag_mask[0] = 0x00; - pkt->ref_tag_mask[1] = 0x00; - pkt->ref_tag_mask[2] = 0x00; - pkt->ref_tag_mask[3] = 0x00; + /* + * No check for ql2xenablehba_err_chk, as it would be an + * I/O error if hba tag generation is not done. + */ + pkt->ref_tag = cpu_to_le32((uint32_t) + (0xffffffff & scsi_get_lba(cmd))); + + if (!qla2x00_hba_err_chk_enabled(sp)) + break; + + pkt->ref_tag_mask[0] = 0xff; + pkt->ref_tag_mask[1] = 0xff; + pkt->ref_tag_mask[2] = 0xff; + pkt->ref_tag_mask[3] = 0xff; break; /* @@ -730,20 +738,16 @@ qla24xx_set_t10dif_tags(struct scsi_cmnd *cmd, struct fw_dif_context *pkt, * match LBA in CDB + N */ case SCSI_PROT_DIF_TYPE2: - if (!ql2xenablehba_err_chk) - break; - - if (scsi_prot_sg_count(cmd)) { - spt = page_address(sg_page(scsi_prot_sglist(cmd))) + - scsi_prot_sglist(cmd)[0].offset; - pkt->app_tag = swab32(spt->app_tag); - pkt->app_tag_mask[0] = 0xff; - pkt->app_tag_mask[1] = 0xff; - } + pkt->app_tag = __constant_cpu_to_le16(0); + pkt->app_tag_mask[0] = 0x0; + pkt->app_tag_mask[1] = 0x0; pkt->ref_tag = cpu_to_le32((uint32_t) (0xffffffff & scsi_get_lba(cmd))); + if (!qla2x00_hba_err_chk_enabled(sp)) + break; + /* enable ALL bytes of the ref tag */ pkt->ref_tag_mask[0] = 0xff; pkt->ref_tag_mask[1] = 0xff; @@ -763,26 +767,15 @@ qla24xx_set_t10dif_tags(struct scsi_cmnd *cmd, struct fw_dif_context *pkt, * 16 bit app tag. */ case SCSI_PROT_DIF_TYPE1: - if (!ql2xenablehba_err_chk) + pkt->ref_tag = cpu_to_le32((uint32_t) + (0xffffffff & scsi_get_lba(cmd))); + pkt->app_tag = __constant_cpu_to_le16(0); + pkt->app_tag_mask[0] = 0x0; + pkt->app_tag_mask[1] = 0x0; + + if (!qla2x00_hba_err_chk_enabled(sp)) break; - if (protcnt && (op == SCSI_PROT_WRITE_STRIP || - op == SCSI_PROT_WRITE_PASS)) { - spt = page_address(sg_page(scsi_prot_sglist(cmd))) + - scsi_prot_sglist(cmd)[0].offset; - ql_dbg(ql_dbg_io, vha, 0x3008, - "LBA from user %p, lba = 0x%x for cmd=%p.\n", - spt, (int)spt->ref_tag, cmd); - pkt->ref_tag = swab32(spt->ref_tag); - pkt->app_tag_mask[0] = 0x0; - pkt->app_tag_mask[1] = 0x0; - } else { - pkt->ref_tag = cpu_to_le32((uint32_t) - (0xffffffff & scsi_get_lba(cmd))); - pkt->app_tag = __constant_cpu_to_le16(0); - pkt->app_tag_mask[0] = 0x0; - pkt->app_tag_mask[1] = 0x0; - } /* enable ALL bytes of the ref tag */ pkt->ref_tag_mask[0] = 0xff; pkt->ref_tag_mask[1] = 0xff; @@ -798,8 +791,162 @@ qla24xx_set_t10dif_tags(struct scsi_cmnd *cmd, struct fw_dif_context *pkt, scsi_get_prot_type(cmd), cmd); } +struct qla2_sgx { + dma_addr_t dma_addr; /* OUT */ + uint32_t dma_len; /* OUT */ + + uint32_t tot_bytes; /* IN */ + struct scatterlist *cur_sg; /* IN */ + + /* for book keeping, bzero on initial invocation */ + uint32_t bytes_consumed; + uint32_t num_bytes; + uint32_t tot_partial; + + /* for debugging */ + uint32_t num_sg; + srb_t *sp; +}; static int +qla24xx_get_one_block_sg(uint32_t blk_sz, struct qla2_sgx *sgx, + uint32_t *partial) +{ + struct scatterlist *sg; + uint32_t cumulative_partial, sg_len; + dma_addr_t sg_dma_addr; + + if (sgx->num_bytes == sgx->tot_bytes) + return 0; + + sg = sgx->cur_sg; + cumulative_partial = sgx->tot_partial; + + sg_dma_addr = sg_dma_address(sg); + sg_len = sg_dma_len(sg); + + sgx->dma_addr = sg_dma_addr + sgx->bytes_consumed; + + if ((cumulative_partial + (sg_len - sgx->bytes_consumed)) >= blk_sz) { + sgx->dma_len = (blk_sz - cumulative_partial); + sgx->tot_partial = 0; + sgx->num_bytes += blk_sz; + *partial = 0; + } else { + sgx->dma_len = sg_len - sgx->bytes_consumed; + sgx->tot_partial += sgx->dma_len; + *partial = 1; + } + + sgx->bytes_consumed += sgx->dma_len; + + if (sg_len == sgx->bytes_consumed) { + sg = sg_next(sg); + sgx->num_sg++; + sgx->cur_sg = sg; + sgx->bytes_consumed = 0; + } + + return 1; +} + +static int +qla24xx_walk_and_build_sglist_no_difb(struct qla_hw_data *ha, srb_t *sp, + uint32_t *dsd, uint16_t tot_dsds) +{ + void *next_dsd; + uint8_t avail_dsds = 0; + uint32_t dsd_list_len; + struct dsd_dma *dsd_ptr; + struct scatterlist *sg_prot; + uint32_t *cur_dsd = dsd; + uint16_t used_dsds = tot_dsds; + + uint32_t prot_int; + uint32_t partial; + struct qla2_sgx sgx; + dma_addr_t sle_dma; + uint32_t sle_dma_len, tot_prot_dma_len = 0; + struct scsi_cmnd *cmd = sp->cmd; + + prot_int = cmd->device->sector_size; + + memset(&sgx, 0, sizeof(struct qla2_sgx)); + sgx.tot_bytes = scsi_bufflen(sp->cmd); + sgx.cur_sg = scsi_sglist(sp->cmd); + sgx.sp = sp; + + sg_prot = scsi_prot_sglist(sp->cmd); + + while (qla24xx_get_one_block_sg(prot_int, &sgx, &partial)) { + + sle_dma = sgx.dma_addr; + sle_dma_len = sgx.dma_len; +alloc_and_fill: + /* Allocate additional continuation packets? */ + if (avail_dsds == 0) { + avail_dsds = (used_dsds > QLA_DSDS_PER_IOCB) ? + QLA_DSDS_PER_IOCB : used_dsds; + dsd_list_len = (avail_dsds + 1) * 12; + used_dsds -= avail_dsds; + + /* allocate tracking DS */ + dsd_ptr = kzalloc(sizeof(struct dsd_dma), GFP_ATOMIC); + if (!dsd_ptr) + return 1; + + /* allocate new list */ + dsd_ptr->dsd_addr = next_dsd = + dma_pool_alloc(ha->dl_dma_pool, GFP_ATOMIC, + &dsd_ptr->dsd_list_dma); + + if (!next_dsd) { + /* + * Need to cleanup only this dsd_ptr, rest + * will be done by sp_free_dma() + */ + kfree(dsd_ptr); + return 1; + } + + list_add_tail(&dsd_ptr->list, + &((struct crc_context *)sp->ctx)->dsd_list); + + sp->flags |= SRB_CRC_CTX_DSD_VALID; + + /* add new list to cmd iocb or last list */ + *cur_dsd++ = cpu_to_le32(LSD(dsd_ptr->dsd_list_dma)); + *cur_dsd++ = cpu_to_le32(MSD(dsd_ptr->dsd_list_dma)); + *cur_dsd++ = dsd_list_len; + cur_dsd = (uint32_t *)next_dsd; + } + *cur_dsd++ = cpu_to_le32(LSD(sle_dma)); + *cur_dsd++ = cpu_to_le32(MSD(sle_dma)); + *cur_dsd++ = cpu_to_le32(sle_dma_len); + avail_dsds--; + + if (partial == 0) { + /* Got a full protection interval */ + sle_dma = sg_dma_address(sg_prot) + tot_prot_dma_len; + sle_dma_len = 8; + + tot_prot_dma_len += sle_dma_len; + if (tot_prot_dma_len == sg_dma_len(sg_prot)) { + tot_prot_dma_len = 0; + sg_prot = sg_next(sg_prot); + } + + partial = 1; /* So as to not re-enter this block */ + goto alloc_and_fill; + } + } + /* Null termination */ + *cur_dsd++ = 0; + *cur_dsd++ = 0; + *cur_dsd++ = 0; + return 0; +} +static int qla24xx_walk_and_build_sglist(struct qla_hw_data *ha, srb_t *sp, uint32_t *dsd, uint16_t tot_dsds) { @@ -981,7 +1128,7 @@ qla24xx_build_scsi_crc_2_iocbs(srb_t *sp, struct cmd_type_crc_2 *cmd_pkt, struct scsi_cmnd *cmd; struct scatterlist *cur_seg; int sgc; - uint32_t total_bytes; + uint32_t total_bytes = 0; uint32_t data_bytes; uint32_t dif_bytes; uint8_t bundling = 1; @@ -1023,8 +1170,10 @@ qla24xx_build_scsi_crc_2_iocbs(srb_t *sp, struct cmd_type_crc_2 *cmd_pkt, __constant_cpu_to_le16(CF_READ_DATA); } - tot_prot_dsds = scsi_prot_sg_count(cmd); - if (!tot_prot_dsds) + if ((scsi_get_prot_op(sp->cmd) == SCSI_PROT_READ_INSERT) || + (scsi_get_prot_op(sp->cmd) == SCSI_PROT_WRITE_STRIP) || + (scsi_get_prot_op(sp->cmd) == SCSI_PROT_READ_STRIP) || + (scsi_get_prot_op(sp->cmd) == SCSI_PROT_WRITE_INSERT)) bundling = 0; /* Allocate CRC context from global pool */ @@ -1047,7 +1196,7 @@ qla24xx_build_scsi_crc_2_iocbs(srb_t *sp, struct cmd_type_crc_2 *cmd_pkt, INIT_LIST_HEAD(&crc_ctx_pkt->dsd_list); - qla24xx_set_t10dif_tags(cmd, (struct fw_dif_context *) + qla24xx_set_t10dif_tags(sp, (struct fw_dif_context *) &crc_ctx_pkt->ref_tag, tot_prot_dsds); cmd_pkt->crc_context_address[0] = cpu_to_le32(LSD(crc_ctx_dma)); @@ -1076,7 +1225,6 @@ qla24xx_build_scsi_crc_2_iocbs(srb_t *sp, struct cmd_type_crc_2 *cmd_pkt, fcp_cmnd->additional_cdb_len |= 2; int_to_scsilun(sp->cmd->device->lun, &fcp_cmnd->lun); - host_to_fcp_swap((uint8_t *)&fcp_cmnd->lun, sizeof(fcp_cmnd->lun)); memcpy(fcp_cmnd->cdb, cmd->cmnd, cmd->cmd_len); cmd_pkt->fcp_cmnd_dseg_len = cpu_to_le16(fcp_cmnd_len); cmd_pkt->fcp_cmnd_dseg_address[0] = cpu_to_le32( @@ -1107,15 +1255,28 @@ qla24xx_build_scsi_crc_2_iocbs(srb_t *sp, struct cmd_type_crc_2 *cmd_pkt, cmd_pkt->fcp_rsp_dseg_len = 0; /* Let response come in status iocb */ /* Compute dif len and adjust data len to incude protection */ - total_bytes = data_bytes; dif_bytes = 0; blk_size = cmd->device->sector_size; - if (scsi_get_prot_op(cmd) != SCSI_PROT_NORMAL) { - dif_bytes = (data_bytes / blk_size) * 8; - total_bytes += dif_bytes; + dif_bytes = (data_bytes / blk_size) * 8; + + switch (scsi_get_prot_op(sp->cmd)) { + case SCSI_PROT_READ_INSERT: + case SCSI_PROT_WRITE_STRIP: + total_bytes = data_bytes; + data_bytes += dif_bytes; + break; + + case SCSI_PROT_READ_STRIP: + case SCSI_PROT_WRITE_INSERT: + case SCSI_PROT_READ_PASS: + case SCSI_PROT_WRITE_PASS: + total_bytes = data_bytes + dif_bytes; + break; + default: + BUG(); } - if (!ql2xenablehba_err_chk) + if (!qla2x00_hba_err_chk_enabled(sp)) fw_prot_opts |= 0x10; /* Disable Guard tag checking */ if (!bundling) { @@ -1151,7 +1312,12 @@ qla24xx_build_scsi_crc_2_iocbs(srb_t *sp, struct cmd_type_crc_2 *cmd_pkt, cmd_pkt->control_flags |= __constant_cpu_to_le16(CF_DATA_SEG_DESCR_ENABLE); - if (qla24xx_walk_and_build_sglist(ha, sp, cur_dsd, + + if (!bundling && tot_prot_dsds) { + if (qla24xx_walk_and_build_sglist_no_difb(ha, sp, + cur_dsd, tot_dsds)) + goto crc_queuing_error; + } else if (qla24xx_walk_and_build_sglist(ha, sp, cur_dsd, (tot_dsds - tot_prot_dsds))) goto crc_queuing_error; @@ -1414,6 +1580,22 @@ qla24xx_dif_start_scsi(srb_t *sp) goto queuing_error; else sp->flags |= SRB_DMA_VALID; + + if ((scsi_get_prot_op(cmd) == SCSI_PROT_READ_INSERT) || + (scsi_get_prot_op(cmd) == SCSI_PROT_WRITE_STRIP)) { + struct qla2_sgx sgx; + uint32_t partial; + + memset(&sgx, 0, sizeof(struct qla2_sgx)); + sgx.tot_bytes = scsi_bufflen(cmd); + sgx.cur_sg = scsi_sglist(cmd); + sgx.sp = sp; + + nseg = 0; + while (qla24xx_get_one_block_sg( + cmd->device->sector_size, &sgx, &partial)) + nseg++; + } } else nseg = 0; @@ -1428,6 +1610,11 @@ qla24xx_dif_start_scsi(srb_t *sp) goto queuing_error; else sp->flags |= SRB_CRC_PROT_DMA_VALID; + + if ((scsi_get_prot_op(cmd) == SCSI_PROT_READ_INSERT) || + (scsi_get_prot_op(cmd) == SCSI_PROT_WRITE_STRIP)) { + nseg = scsi_bufflen(cmd) / cmd->device->sector_size; + } } else { nseg = 0; } @@ -1454,6 +1641,7 @@ qla24xx_dif_start_scsi(srb_t *sp) /* Build header part of command packet (excluding the OPCODE). */ req->current_outstanding_cmd = handle; req->outstanding_cmds[handle] = sp; + sp->handle = handle; sp->cmd->host_scribble = (unsigned char *)(unsigned long)handle; req->cnt -= req_cnt; diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c index b16b772..8a7591f 100644 --- a/drivers/scsi/qla2xxx/qla_isr.c +++ b/drivers/scsi/qla2xxx/qla_isr.c @@ -719,7 +719,6 @@ skip_rio: vha->flags.rscn_queue_overflow = 1; } - atomic_set(&vha->loop_state, LOOP_UPDATE); atomic_set(&vha->loop_down_timer, 0); vha->flags.management_server_logged_in = 0; @@ -1435,25 +1434,27 @@ struct scsi_dif_tuple { * ASC/ASCQ fields in the sense buffer with ILLEGAL_REQUEST * to indicate to the kernel that the HBA detected error. */ -static inline void +static inline int qla2x00_handle_dif_error(srb_t *sp, struct sts_entry_24xx *sts24) { struct scsi_qla_host *vha = sp->fcport->vha; struct scsi_cmnd *cmd = sp->cmd; - struct scsi_dif_tuple *ep = - (struct scsi_dif_tuple *)&sts24->data[20]; - struct scsi_dif_tuple *ap = - (struct scsi_dif_tuple *)&sts24->data[12]; + uint8_t *ap = &sts24->data[12]; + uint8_t *ep = &sts24->data[20]; uint32_t e_ref_tag, a_ref_tag; uint16_t e_app_tag, a_app_tag; uint16_t e_guard, a_guard; - e_ref_tag = be32_to_cpu(ep->ref_tag); - a_ref_tag = be32_to_cpu(ap->ref_tag); - e_app_tag = be16_to_cpu(ep->app_tag); - a_app_tag = be16_to_cpu(ap->app_tag); - e_guard = be16_to_cpu(ep->guard); - a_guard = be16_to_cpu(ap->guard); + /* + * swab32 of the "data" field in the beginning of qla2x00_status_entry() + * would make guard field appear at offset 2 + */ + a_guard = le16_to_cpu(*(uint16_t *)(ap + 2)); + a_app_tag = le16_to_cpu(*(uint16_t *)(ap + 0)); + a_ref_tag = le32_to_cpu(*(uint32_t *)(ap + 4)); + e_guard = le16_to_cpu(*(uint16_t *)(ep + 2)); + e_app_tag = le16_to_cpu(*(uint16_t *)(ep + 0)); + e_ref_tag = le32_to_cpu(*(uint32_t *)(ep + 4)); ql_dbg(ql_dbg_io, vha, 0x3023, "iocb(s) %p Returned STATUS.\n", sts24); @@ -1465,6 +1466,63 @@ qla2x00_handle_dif_error(srb_t *sp, struct sts_entry_24xx *sts24) cmd->cmnd[0], (u64)scsi_get_lba(cmd), a_ref_tag, e_ref_tag, a_app_tag, e_app_tag, a_guard, e_guard); + /* + * Ignore sector if: + * For type 3: ref & app tag is all 'f's + * For type 0,1,2: app tag is all 'f's + */ + if ((a_app_tag == 0xffff) && + ((scsi_get_prot_type(cmd) != SCSI_PROT_DIF_TYPE3) || + (a_ref_tag == 0xffffffff))) { + uint32_t blocks_done, resid; + sector_t lba_s = scsi_get_lba(cmd); + + /* 2TB boundary case covered automatically with this */ + blocks_done = e_ref_tag - (uint32_t)lba_s + 1; + + resid = scsi_bufflen(cmd) - (blocks_done * + cmd->device->sector_size); + + scsi_set_resid(cmd, resid); + cmd->result = DID_OK << 16; + + /* Update protection tag */ + if (scsi_prot_sg_count(cmd)) { + uint32_t i, j = 0, k = 0, num_ent; + struct scatterlist *sg; + struct sd_dif_tuple *spt; + + /* Patch the corresponding protection tags */ + scsi_for_each_prot_sg(cmd, sg, + scsi_prot_sg_count(cmd), i) { + num_ent = sg_dma_len(sg) / 8; + if (k + num_ent < blocks_done) { + k += num_ent; + continue; + } + j = blocks_done - k - 1; + k = blocks_done; + break; + } + + if (k != blocks_done) { + qla_printk(KERN_WARNING, sp->fcport->vha->hw, + "unexpected tag values tag:lba=%x:%llx)\n", + e_ref_tag, (unsigned long long)lba_s); + return 1; + } + + spt = page_address(sg_page(sg)) + sg->offset; + spt += j; + + spt->app_tag = 0xffff; + if (scsi_get_prot_type(cmd) == SCSI_PROT_DIF_TYPE3) + spt->ref_tag = 0xffffffff; + } + + return 0; + } + /* check guard */ if (e_guard != a_guard) { scsi_build_sense_buffer(1, cmd->sense_buffer, ILLEGAL_REQUEST, @@ -1472,28 +1530,30 @@ qla2x00_handle_dif_error(srb_t *sp, struct sts_entry_24xx *sts24) set_driver_byte(cmd, DRIVER_SENSE); set_host_byte(cmd, DID_ABORT); cmd->result |= SAM_STAT_CHECK_CONDITION << 1; - return; + return 1; } - /* check appl tag */ - if (e_app_tag != a_app_tag) { + /* check ref tag */ + if (e_ref_tag != a_ref_tag) { scsi_build_sense_buffer(1, cmd->sense_buffer, ILLEGAL_REQUEST, - 0x10, 0x2); + 0x10, 0x3); set_driver_byte(cmd, DRIVER_SENSE); set_host_byte(cmd, DID_ABORT); cmd->result |= SAM_STAT_CHECK_CONDITION << 1; - return; + return 1; } - /* check ref tag */ - if (e_ref_tag != a_ref_tag) { + /* check appl tag */ + if (e_app_tag != a_app_tag) { scsi_build_sense_buffer(1, cmd->sense_buffer, ILLEGAL_REQUEST, - 0x10, 0x3); + 0x10, 0x2); set_driver_byte(cmd, DRIVER_SENSE); set_host_byte(cmd, DID_ABORT); cmd->result |= SAM_STAT_CHECK_CONDITION << 1; - return; + return 1; } + + return 1; } /** @@ -1767,7 +1827,7 @@ check_scsi_status: break; case CS_DIF_ERROR: - qla2x00_handle_dif_error(sp, sts24); + logit = qla2x00_handle_dif_error(sp, sts24); break; default: cp->result = DID_ERROR << 16; @@ -2468,11 +2528,10 @@ qla2x00_request_irqs(struct qla_hw_data *ha, struct rsp_que *rsp) goto skip_msi; } - if (IS_QLA2432(ha) && (ha->pdev->revision < QLA_MSIX_CHIP_REV_24XX || - !QLA_MSIX_FW_MODE_1(ha->fw_attributes))) { + if (IS_QLA2432(ha) && (ha->pdev->revision < QLA_MSIX_CHIP_REV_24XX)) { ql_log(ql_log_warn, vha, 0x0035, "MSI-X; Unsupported ISP2432 (0x%X, 0x%X).\n", - ha->pdev->revision, ha->fw_attributes); + ha->pdev->revision, QLA_MSIX_CHIP_REV_24XX); goto skip_msix; } diff --git a/drivers/scsi/qla2xxx/qla_mid.c b/drivers/scsi/qla2xxx/qla_mid.c index c706ed3..f488cc6 100644 --- a/drivers/scsi/qla2xxx/qla_mid.c +++ b/drivers/scsi/qla2xxx/qla_mid.c @@ -472,7 +472,7 @@ qla24xx_create_vhost(struct fc_vport *fc_vport) host->can_queue = base_vha->req->length + 128; host->this_id = 255; host->cmd_per_lun = 3; - if ((IS_QLA25XX(ha) || IS_QLA81XX(ha)) && ql2xenabledif) + if (IS_T10_PI_CAPABLE(ha) && ql2xenabledif) host->max_cmd_len = 32; else host->max_cmd_len = MAX_CMDSZ; diff --git a/drivers/scsi/qla2xxx/qla_nx.c b/drivers/scsi/qla2xxx/qla_nx.c index 5cbf33a..049807c 100644 --- a/drivers/scsi/qla2xxx/qla_nx.c +++ b/drivers/scsi/qla2xxx/qla_nx.c @@ -2208,6 +2208,7 @@ qla82xx_msix_rsp_q(int irq, void *dev_id) struct qla_hw_data *ha; struct rsp_que *rsp; struct device_reg_82xx __iomem *reg; + unsigned long flags; rsp = (struct rsp_que *) dev_id; if (!rsp) { @@ -2218,11 +2219,11 @@ qla82xx_msix_rsp_q(int irq, void *dev_id) ha = rsp->hw; reg = &ha->iobase->isp82; - spin_lock_irq(&ha->hardware_lock); + spin_lock_irqsave(&ha->hardware_lock, flags); vha = pci_get_drvdata(ha->pdev); qla24xx_process_response_queue(vha, rsp); WRT_REG_DWORD(®->host_int, 0); - spin_unlock_irq(&ha->hardware_lock); + spin_unlock_irqrestore(&ha->hardware_lock, flags); return IRQ_HANDLED; } @@ -2838,6 +2839,16 @@ sufficient_dsds: int_to_scsilun(sp->cmd->device->lun, &cmd_pkt->lun); host_to_fcp_swap((uint8_t *)&cmd_pkt->lun, sizeof(cmd_pkt->lun)); + /* build FCP_CMND IU */ + memset(ctx->fcp_cmnd, 0, sizeof(struct fcp_cmnd)); + int_to_scsilun(sp->cmd->device->lun, &ctx->fcp_cmnd->lun); + ctx->fcp_cmnd->additional_cdb_len = additional_cdb_len; + + if (cmd->sc_data_direction == DMA_TO_DEVICE) + ctx->fcp_cmnd->additional_cdb_len |= 1; + else if (cmd->sc_data_direction == DMA_FROM_DEVICE) + ctx->fcp_cmnd->additional_cdb_len |= 2; + /* * Update tagged queuing modifier -- default is TSK_SIMPLE (0). */ @@ -2854,16 +2865,6 @@ sufficient_dsds: } } - /* build FCP_CMND IU */ - memset(ctx->fcp_cmnd, 0, sizeof(struct fcp_cmnd)); - int_to_scsilun(sp->cmd->device->lun, &ctx->fcp_cmnd->lun); - ctx->fcp_cmnd->additional_cdb_len = additional_cdb_len; - - if (cmd->sc_data_direction == DMA_TO_DEVICE) - ctx->fcp_cmnd->additional_cdb_len |= 1; - else if (cmd->sc_data_direction == DMA_FROM_DEVICE) - ctx->fcp_cmnd->additional_cdb_len |= 2; - memcpy(ctx->fcp_cmnd->cdb, cmd->cmnd, cmd->cmd_len); fcp_dl = (uint32_t *)(ctx->fcp_cmnd->cdb + 16 + diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index e02df27..4cace3f 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -106,17 +106,21 @@ MODULE_PARM_DESC(ql2xmaxqdepth, "Maximum queue depth to report for target devices."); /* Do not change the value of this after module load */ -int ql2xenabledif = 1; +int ql2xenabledif = 0; module_param(ql2xenabledif, int, S_IRUGO|S_IWUSR); MODULE_PARM_DESC(ql2xenabledif, " Enable T10-CRC-DIF " - " Default is 0 - No DIF Support. 1 - Enable it"); + " Default is 0 - No DIF Support. 1 - Enable it" + ", 2 - Enable DIF for all types, except Type 0."); -int ql2xenablehba_err_chk; +int ql2xenablehba_err_chk = 2; module_param(ql2xenablehba_err_chk, int, S_IRUGO|S_IWUSR); MODULE_PARM_DESC(ql2xenablehba_err_chk, - " Enable T10-CRC-DIF Error isolation by HBA" - " Default is 0 - Error isolation disabled, 1 - Enable it"); + " Enable T10-CRC-DIF Error isolation by HBA:\n" + " Default is 1.\n" + " 0 -- Error isolation disabled\n" + " 1 -- Error isolation enabled only for DIX Type 0\n" + " 2 -- Error isolation enabled for all Types\n"); int ql2xiidmaenable=1; module_param(ql2xiidmaenable, int, S_IRUGO); @@ -909,7 +913,14 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd) "Abort command mbx success.\n"); wait = 1; } + + spin_lock_irqsave(&ha->hardware_lock, flags); qla2x00_sp_compl(ha, sp); + spin_unlock_irqrestore(&ha->hardware_lock, flags); + + /* Did the command return during mailbox execution? */ + if (ret == FAILED && !CMD_SP(cmd)) + ret = SUCCESS; /* Wait for the command to be returned. */ if (wait) { @@ -2251,7 +2262,7 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) host->this_id = 255; host->cmd_per_lun = 3; host->unique_id = host->host_no; - if ((IS_QLA25XX(ha) || IS_QLA81XX(ha)) && ql2xenabledif) + if (IS_T10_PI_CAPABLE(ha) && ql2xenabledif) host->max_cmd_len = 32; else host->max_cmd_len = MAX_CMDSZ; @@ -2378,13 +2389,16 @@ skip_dpc: "Detected hba at address=%p.\n", ha); - if ((IS_QLA25XX(ha) || IS_QLA81XX(ha)) && ql2xenabledif) { + if (IS_T10_PI_CAPABLE(ha) && ql2xenabledif) { if (ha->fw_attributes & BIT_4) { + int prot = 0; base_vha->flags.difdix_supported = 1; ql_dbg(ql_dbg_init, base_vha, 0x00f1, "Registering for DIF/DIX type 1 and 3 protection.\n"); + if (ql2xenabledif == 1) + prot = SHOST_DIX_TYPE0_PROTECTION; scsi_host_set_prot(host, - SHOST_DIF_TYPE1_PROTECTION + prot | SHOST_DIF_TYPE1_PROTECTION | SHOST_DIF_TYPE2_PROTECTION | SHOST_DIF_TYPE3_PROTECTION | SHOST_DIX_TYPE1_PROTECTION diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h index 062c97b..13b6357 100644 --- a/drivers/scsi/qla2xxx/qla_version.h +++ b/drivers/scsi/qla2xxx/qla_version.h @@ -7,7 +7,7 @@ /* * Driver version */ -#define QLA2XXX_VERSION "8.03.07.03-k" +#define QLA2XXX_VERSION "8.03.07.07-k" #define QLA_DRIVER_MAJOR_VER 8 #define QLA_DRIVER_MINOR_VER 3 diff --git a/drivers/spi/spi-fsl-spi.c b/drivers/spi/spi-fsl-spi.c index d240755..24cacff 100644 --- a/drivers/spi/spi-fsl-spi.c +++ b/drivers/spi/spi-fsl-spi.c @@ -825,6 +825,9 @@ static void fsl_spi_cpm_free(struct mpc8xxx_spi *mspi) { struct device *dev = mspi->dev; + if (!(mspi->flags & SPI_CPM_MODE)) + return; + dma_unmap_single(dev, mspi->dma_dummy_rx, SPI_MRBLR, DMA_FROM_DEVICE); dma_unmap_single(dev, mspi->dma_dummy_tx, PAGE_SIZE, DMA_TO_DEVICE); cpm_muram_free(cpm_muram_offset(mspi->tx_bd)); diff --git a/drivers/spi/spi-imx.c b/drivers/spi/spi-imx.c index 8ac6542..fa594d6 100644 --- a/drivers/spi/spi-imx.c +++ b/drivers/spi/spi-imx.c @@ -786,9 +786,11 @@ static int __devinit spi_imx_probe(struct platform_device *pdev) int cs_gpio = of_get_named_gpio(np, "cs-gpios", i); if (cs_gpio < 0) cs_gpio = mxc_platform_info->chipselect[i]; + + spi_imx->chipselect[i] = cs_gpio; if (cs_gpio < 0) continue; - spi_imx->chipselect[i] = cs_gpio; + ret = gpio_request(spi_imx->chipselect[i], DRIVER_NAME); if (ret) { while (i > 0) { diff --git a/drivers/spi/spi-s3c64xx.c b/drivers/spi/spi-s3c64xx.c index 595dacc..019a716 100644 --- a/drivers/spi/spi-s3c64xx.c +++ b/drivers/spi/spi-s3c64xx.c @@ -131,6 +131,12 @@ #define RXBUSY (1<<2) #define TXBUSY (1<<3) +struct s3c64xx_spi_dma_data { + unsigned ch; + enum dma_data_direction direction; + enum dma_ch dmach; +}; + /** * struct s3c64xx_spi_driver_data - Runtime info holder for SPI driver. * @clk: Pointer to the spi clock. @@ -164,13 +170,14 @@ struct s3c64xx_spi_driver_data { struct work_struct work; struct list_head queue; spinlock_t lock; - enum dma_ch rx_dmach; - enum dma_ch tx_dmach; unsigned long sfr_start; struct completion xfer_completion; unsigned state; unsigned cur_mode, cur_bpw; unsigned cur_speed; + struct s3c64xx_spi_dma_data rx_dma; + struct s3c64xx_spi_dma_data tx_dma; + struct samsung_dma_ops *ops; }; static struct s3c2410_dma_client s3c64xx_spi_dma_client = { @@ -226,6 +233,78 @@ static void flush_fifo(struct s3c64xx_spi_driver_data *sdd) writel(val, regs + S3C64XX_SPI_CH_CFG); } +static void s3c64xx_spi_dmacb(void *data) +{ + struct s3c64xx_spi_driver_data *sdd; + struct s3c64xx_spi_dma_data *dma = data; + unsigned long flags; + + if (dma->direction == DMA_FROM_DEVICE) + sdd = container_of(data, + struct s3c64xx_spi_driver_data, rx_dma); + else + sdd = container_of(data, + struct s3c64xx_spi_driver_data, tx_dma); + + spin_lock_irqsave(&sdd->lock, flags); + + if (dma->direction == DMA_FROM_DEVICE) { + sdd->state &= ~RXBUSY; + if (!(sdd->state & TXBUSY)) + complete(&sdd->xfer_completion); + } else { + sdd->state &= ~TXBUSY; + if (!(sdd->state & RXBUSY)) + complete(&sdd->xfer_completion); + } + + spin_unlock_irqrestore(&sdd->lock, flags); +} + +static void prepare_dma(struct s3c64xx_spi_dma_data *dma, + unsigned len, dma_addr_t buf) +{ + struct s3c64xx_spi_driver_data *sdd; + struct samsung_dma_prep_info info; + + if (dma->direction == DMA_FROM_DEVICE) + sdd = container_of((void *)dma, + struct s3c64xx_spi_driver_data, rx_dma); + else + sdd = container_of((void *)dma, + struct s3c64xx_spi_driver_data, tx_dma); + + info.cap = DMA_SLAVE; + info.len = len; + info.fp = s3c64xx_spi_dmacb; + info.fp_param = dma; + info.direction = dma->direction; + info.buf = buf; + + sdd->ops->prepare(dma->ch, &info); + sdd->ops->trigger(dma->ch); +} + +static int acquire_dma(struct s3c64xx_spi_driver_data *sdd) +{ + struct samsung_dma_info info; + + sdd->ops = samsung_dma_get_ops(); + + info.cap = DMA_SLAVE; + info.client = &s3c64xx_spi_dma_client; + info.width = sdd->cur_bpw / 8; + + info.direction = sdd->rx_dma.direction; + info.fifo = sdd->sfr_start + S3C64XX_SPI_RX_DATA; + sdd->rx_dma.ch = sdd->ops->request(sdd->rx_dma.dmach, &info); + info.direction = sdd->tx_dma.direction; + info.fifo = sdd->sfr_start + S3C64XX_SPI_TX_DATA; + sdd->tx_dma.ch = sdd->ops->request(sdd->tx_dma.dmach, &info); + + return 1; +} + static void enable_datapath(struct s3c64xx_spi_driver_data *sdd, struct spi_device *spi, struct spi_transfer *xfer, int dma_mode) @@ -258,10 +337,7 @@ static void enable_datapath(struct s3c64xx_spi_driver_data *sdd, chcfg |= S3C64XX_SPI_CH_TXCH_ON; if (dma_mode) { modecfg |= S3C64XX_SPI_MODE_TXDMA_ON; - s3c2410_dma_config(sdd->tx_dmach, sdd->cur_bpw / 8); - s3c2410_dma_enqueue(sdd->tx_dmach, (void *)sdd, - xfer->tx_dma, xfer->len); - s3c2410_dma_ctrl(sdd->tx_dmach, S3C2410_DMAOP_START); + prepare_dma(&sdd->tx_dma, xfer->len, xfer->tx_dma); } else { switch (sdd->cur_bpw) { case 32: @@ -293,10 +369,7 @@ static void enable_datapath(struct s3c64xx_spi_driver_data *sdd, writel(((xfer->len * 8 / sdd->cur_bpw) & 0xffff) | S3C64XX_SPI_PACKET_CNT_EN, regs + S3C64XX_SPI_PACKET_CNT); - s3c2410_dma_config(sdd->rx_dmach, sdd->cur_bpw / 8); - s3c2410_dma_enqueue(sdd->rx_dmach, (void *)sdd, - xfer->rx_dma, xfer->len); - s3c2410_dma_ctrl(sdd->rx_dmach, S3C2410_DMAOP_START); + prepare_dma(&sdd->rx_dma, xfer->len, xfer->rx_dma); } } @@ -482,46 +555,6 @@ static void s3c64xx_spi_config(struct s3c64xx_spi_driver_data *sdd) } } -static void s3c64xx_spi_dma_rxcb(struct s3c2410_dma_chan *chan, void *buf_id, - int size, enum s3c2410_dma_buffresult res) -{ - struct s3c64xx_spi_driver_data *sdd = buf_id; - unsigned long flags; - - spin_lock_irqsave(&sdd->lock, flags); - - if (res == S3C2410_RES_OK) - sdd->state &= ~RXBUSY; - else - dev_err(&sdd->pdev->dev, "DmaAbrtRx-%d\n", size); - - /* If the other done */ - if (!(sdd->state & TXBUSY)) - complete(&sdd->xfer_completion); - - spin_unlock_irqrestore(&sdd->lock, flags); -} - -static void s3c64xx_spi_dma_txcb(struct s3c2410_dma_chan *chan, void *buf_id, - int size, enum s3c2410_dma_buffresult res) -{ - struct s3c64xx_spi_driver_data *sdd = buf_id; - unsigned long flags; - - spin_lock_irqsave(&sdd->lock, flags); - - if (res == S3C2410_RES_OK) - sdd->state &= ~TXBUSY; - else - dev_err(&sdd->pdev->dev, "DmaAbrtTx-%d \n", size); - - /* If the other done */ - if (!(sdd->state & RXBUSY)) - complete(&sdd->xfer_completion); - - spin_unlock_irqrestore(&sdd->lock, flags); -} - #define XFER_DMAADDR_INVALID DMA_BIT_MASK(32) static int s3c64xx_spi_map_mssg(struct s3c64xx_spi_driver_data *sdd, @@ -696,12 +729,10 @@ static void handle_msg(struct s3c64xx_spi_driver_data *sdd, if (use_dma) { if (xfer->tx_buf != NULL && (sdd->state & TXBUSY)) - s3c2410_dma_ctrl(sdd->tx_dmach, - S3C2410_DMAOP_FLUSH); + sdd->ops->stop(sdd->tx_dma.ch); if (xfer->rx_buf != NULL && (sdd->state & RXBUSY)) - s3c2410_dma_ctrl(sdd->rx_dmach, - S3C2410_DMAOP_FLUSH); + sdd->ops->stop(sdd->rx_dma.ch); } goto out; @@ -739,30 +770,6 @@ out: msg->complete(msg->context); } -static int acquire_dma(struct s3c64xx_spi_driver_data *sdd) -{ - if (s3c2410_dma_request(sdd->rx_dmach, - &s3c64xx_spi_dma_client, NULL) < 0) { - dev_err(&sdd->pdev->dev, "cannot get RxDMA\n"); - return 0; - } - s3c2410_dma_set_buffdone_fn(sdd->rx_dmach, s3c64xx_spi_dma_rxcb); - s3c2410_dma_devconfig(sdd->rx_dmach, S3C2410_DMASRC_HW, - sdd->sfr_start + S3C64XX_SPI_RX_DATA); - - if (s3c2410_dma_request(sdd->tx_dmach, - &s3c64xx_spi_dma_client, NULL) < 0) { - dev_err(&sdd->pdev->dev, "cannot get TxDMA\n"); - s3c2410_dma_free(sdd->rx_dmach, &s3c64xx_spi_dma_client); - return 0; - } - s3c2410_dma_set_buffdone_fn(sdd->tx_dmach, s3c64xx_spi_dma_txcb); - s3c2410_dma_devconfig(sdd->tx_dmach, S3C2410_DMASRC_MEM, - sdd->sfr_start + S3C64XX_SPI_TX_DATA); - - return 1; -} - static void s3c64xx_spi_work(struct work_struct *work) { struct s3c64xx_spi_driver_data *sdd = container_of(work, @@ -799,8 +806,8 @@ static void s3c64xx_spi_work(struct work_struct *work) spin_unlock_irqrestore(&sdd->lock, flags); /* Free DMA channels */ - s3c2410_dma_free(sdd->tx_dmach, &s3c64xx_spi_dma_client); - s3c2410_dma_free(sdd->rx_dmach, &s3c64xx_spi_dma_client); + sdd->ops->release(sdd->rx_dma.ch, &s3c64xx_spi_dma_client); + sdd->ops->release(sdd->tx_dma.ch, &s3c64xx_spi_dma_client); } static int s3c64xx_spi_transfer(struct spi_device *spi, @@ -1017,8 +1024,10 @@ static int __init s3c64xx_spi_probe(struct platform_device *pdev) sdd->cntrlr_info = sci; sdd->pdev = pdev; sdd->sfr_start = mem_res->start; - sdd->tx_dmach = dmatx_res->start; - sdd->rx_dmach = dmarx_res->start; + sdd->tx_dma.dmach = dmatx_res->start; + sdd->tx_dma.direction = DMA_TO_DEVICE; + sdd->rx_dma.dmach = dmarx_res->start; + sdd->rx_dma.direction = DMA_FROM_DEVICE; sdd->cur_bpw = 8; @@ -1106,7 +1115,7 @@ static int __init s3c64xx_spi_probe(struct platform_device *pdev) pdev->id, master->num_chipselect); dev_dbg(&pdev->dev, "\tIOmem=[0x%x-0x%x]\tDMA=[Rx-%d, Tx-%d]\n", mem_res->end, mem_res->start, - sdd->rx_dmach, sdd->tx_dmach); + sdd->rx_dma.dmach, sdd->tx_dma.dmach); return 0; diff --git a/drivers/staging/comedi/drivers/ni_labpc.c b/drivers/staging/comedi/drivers/ni_labpc.c index 6859af0..7611def 100644 --- a/drivers/staging/comedi/drivers/ni_labpc.c +++ b/drivers/staging/comedi/drivers/ni_labpc.c @@ -241,8 +241,10 @@ static int labpc_eeprom_write_insn(struct comedi_device *dev, struct comedi_insn *insn, unsigned int *data); static void labpc_adc_timing(struct comedi_device *dev, struct comedi_cmd *cmd); -#ifdef CONFIG_COMEDI_PCI +#ifdef CONFIG_ISA_DMA_API static unsigned int labpc_suggest_transfer_size(struct comedi_cmd cmd); +#endif +#ifdef CONFIG_COMEDI_PCI static int labpc_find_device(struct comedi_device *dev, int bus, int slot); #endif static int labpc_dio_mem_callback(int dir, int port, int data, diff --git a/drivers/staging/zcache/zcache-main.c b/drivers/staging/zcache/zcache-main.c index a3f5162..462fbc2 100644 --- a/drivers/staging/zcache/zcache-main.c +++ b/drivers/staging/zcache/zcache-main.c @@ -1242,7 +1242,7 @@ static int zcache_pampd_get_data_and_free(char *data, size_t *bufsize, bool raw, int ret = 0; BUG_ON(!is_ephemeral(pool)); - zbud_decompress(virt_to_page(data), pampd); + zbud_decompress((struct page *)(data), pampd); zbud_free_and_delist((struct zbud_hdr *)pampd); atomic_dec(&zcache_curr_eph_pampd_count); return ret; diff --git a/drivers/target/iscsi/iscsi_target_parameters.c b/drivers/target/iscsi/iscsi_target_parameters.c index 497b2e7..5b77316 100644 --- a/drivers/target/iscsi/iscsi_target_parameters.c +++ b/drivers/target/iscsi/iscsi_target_parameters.c @@ -1430,7 +1430,7 @@ static int iscsi_enforce_integrity_rules( u8 DataSequenceInOrder = 0; u8 ErrorRecoveryLevel = 0, SessionType = 0; u8 IFMarker = 0, OFMarker = 0; - u8 IFMarkInt_Reject = 0, OFMarkInt_Reject = 0; + u8 IFMarkInt_Reject = 1, OFMarkInt_Reject = 1; u32 FirstBurstLength = 0, MaxBurstLength = 0; struct iscsi_param *param = NULL; diff --git a/drivers/target/iscsi/iscsi_target_util.c b/drivers/target/iscsi/iscsi_target_util.c index a0d23bc..f00137f 100644 --- a/drivers/target/iscsi/iscsi_target_util.c +++ b/drivers/target/iscsi/iscsi_target_util.c @@ -875,40 +875,6 @@ void iscsit_inc_session_usage_count(struct iscsi_session *sess) } /* - * Used before iscsi_do[rx,tx]_data() to determine iov and [rx,tx]_marker - * array counts needed for sync and steering. - */ -static int iscsit_determine_sync_and_steering_counts( - struct iscsi_conn *conn, - struct iscsi_data_count *count) -{ - u32 length = count->data_length; - u32 marker, markint; - - count->sync_and_steering = 1; - - marker = (count->type == ISCSI_RX_DATA) ? - conn->of_marker : conn->if_marker; - markint = (count->type == ISCSI_RX_DATA) ? - (conn->conn_ops->OFMarkInt * 4) : - (conn->conn_ops->IFMarkInt * 4); - count->ss_iov_count = count->iov_count; - - while (length > 0) { - if (length >= marker) { - count->ss_iov_count += 3; - count->ss_marker_count += 2; - - length -= marker; - marker = markint; - } else - length = 0; - } - - return 0; -} - -/* * Setup conn->if_marker and conn->of_marker values based upon * the initial marker-less interval. (see iSCSI v19 A.2) */ @@ -1290,7 +1256,7 @@ int iscsit_fe_sendpage_sg( struct kvec iov; u32 tx_hdr_size, data_len; u32 offset = cmd->first_data_sg_off; - int tx_sent; + int tx_sent, iov_off; send_hdr: tx_hdr_size = ISCSI_HDR_LEN; @@ -1310,9 +1276,19 @@ send_hdr: } data_len = cmd->tx_size - tx_hdr_size - cmd->padding; - if (conn->conn_ops->DataDigest) + /* + * Set iov_off used by padding and data digest tx_data() calls below + * in order to determine proper offset into cmd->iov_data[] + */ + if (conn->conn_ops->DataDigest) { data_len -= ISCSI_CRC_LEN; - + if (cmd->padding) + iov_off = (cmd->iov_data_count - 2); + else + iov_off = (cmd->iov_data_count - 1); + } else { + iov_off = (cmd->iov_data_count - 1); + } /* * Perform sendpage() for each page in the scatterlist */ @@ -1341,8 +1317,7 @@ send_pg: send_padding: if (cmd->padding) { - struct kvec *iov_p = - &cmd->iov_data[cmd->iov_data_count-1]; + struct kvec *iov_p = &cmd->iov_data[iov_off++]; tx_sent = tx_data(conn, iov_p, 1, cmd->padding); if (cmd->padding != tx_sent) { @@ -1356,8 +1331,7 @@ send_padding: send_datacrc: if (conn->conn_ops->DataDigest) { - struct kvec *iov_d = - &cmd->iov_data[cmd->iov_data_count]; + struct kvec *iov_d = &cmd->iov_data[iov_off]; tx_sent = tx_data(conn, iov_d, 1, ISCSI_CRC_LEN); if (ISCSI_CRC_LEN != tx_sent) { @@ -1431,8 +1405,7 @@ static int iscsit_do_rx_data( struct iscsi_data_count *count) { int data = count->data_length, rx_loop = 0, total_rx = 0, iov_len; - u32 rx_marker_val[count->ss_marker_count], rx_marker_iov = 0; - struct kvec iov[count->ss_iov_count], *iov_p; + struct kvec *iov_p; struct msghdr msg; if (!conn || !conn->sock || !conn->conn_ops) @@ -1440,93 +1413,8 @@ static int iscsit_do_rx_data( memset(&msg, 0, sizeof(struct msghdr)); - if (count->sync_and_steering) { - int size = 0; - u32 i, orig_iov_count = 0; - u32 orig_iov_len = 0, orig_iov_loc = 0; - u32 iov_count = 0, per_iov_bytes = 0; - u32 *rx_marker, old_rx_marker = 0; - struct kvec *iov_record; - - memset(&rx_marker_val, 0, - count->ss_marker_count * sizeof(u32)); - memset(&iov, 0, count->ss_iov_count * sizeof(struct kvec)); - - iov_record = count->iov; - orig_iov_count = count->iov_count; - rx_marker = &conn->of_marker; - - i = 0; - size = data; - orig_iov_len = iov_record[orig_iov_loc].iov_len; - while (size > 0) { - pr_debug("rx_data: #1 orig_iov_len %u," - " orig_iov_loc %u\n", orig_iov_len, orig_iov_loc); - pr_debug("rx_data: #2 rx_marker %u, size" - " %u\n", *rx_marker, size); - - if (orig_iov_len >= *rx_marker) { - iov[iov_count].iov_len = *rx_marker; - iov[iov_count++].iov_base = - (iov_record[orig_iov_loc].iov_base + - per_iov_bytes); - - iov[iov_count].iov_len = (MARKER_SIZE / 2); - iov[iov_count++].iov_base = - &rx_marker_val[rx_marker_iov++]; - iov[iov_count].iov_len = (MARKER_SIZE / 2); - iov[iov_count++].iov_base = - &rx_marker_val[rx_marker_iov++]; - old_rx_marker = *rx_marker; - - /* - * OFMarkInt is in 32-bit words. - */ - *rx_marker = (conn->conn_ops->OFMarkInt * 4); - size -= old_rx_marker; - orig_iov_len -= old_rx_marker; - per_iov_bytes += old_rx_marker; - - pr_debug("rx_data: #3 new_rx_marker" - " %u, size %u\n", *rx_marker, size); - } else { - iov[iov_count].iov_len = orig_iov_len; - iov[iov_count++].iov_base = - (iov_record[orig_iov_loc].iov_base + - per_iov_bytes); - - per_iov_bytes = 0; - *rx_marker -= orig_iov_len; - size -= orig_iov_len; - - if (size) - orig_iov_len = - iov_record[++orig_iov_loc].iov_len; - - pr_debug("rx_data: #4 new_rx_marker" - " %u, size %u\n", *rx_marker, size); - } - } - data += (rx_marker_iov * (MARKER_SIZE / 2)); - - iov_p = &iov[0]; - iov_len = iov_count; - - if (iov_count > count->ss_iov_count) { - pr_err("iov_count: %d, count->ss_iov_count:" - " %d\n", iov_count, count->ss_iov_count); - return -1; - } - if (rx_marker_iov > count->ss_marker_count) { - pr_err("rx_marker_iov: %d, count->ss_marker" - "_count: %d\n", rx_marker_iov, - count->ss_marker_count); - return -1; - } - } else { - iov_p = count->iov; - iov_len = count->iov_count; - } + iov_p = count->iov; + iov_len = count->iov_count; while (total_rx < data) { rx_loop = kernel_recvmsg(conn->sock, &msg, iov_p, iov_len, @@ -1541,16 +1429,6 @@ static int iscsit_do_rx_data( rx_loop, total_rx, data); } - if (count->sync_and_steering) { - int j; - for (j = 0; j < rx_marker_iov; j++) { - pr_debug("rx_data: #5 j: %d, offset: %d\n", - j, rx_marker_val[j]); - conn->of_marker_offset = rx_marker_val[j]; - } - total_rx -= (rx_marker_iov * (MARKER_SIZE / 2)); - } - return total_rx; } @@ -1559,8 +1437,7 @@ static int iscsit_do_tx_data( struct iscsi_data_count *count) { int data = count->data_length, total_tx = 0, tx_loop = 0, iov_len; - u32 tx_marker_val[count->ss_marker_count], tx_marker_iov = 0; - struct kvec iov[count->ss_iov_count], *iov_p; + struct kvec *iov_p; struct msghdr msg; if (!conn || !conn->sock || !conn->conn_ops) @@ -1573,98 +1450,8 @@ static int iscsit_do_tx_data( memset(&msg, 0, sizeof(struct msghdr)); - if (count->sync_and_steering) { - int size = 0; - u32 i, orig_iov_count = 0; - u32 orig_iov_len = 0, orig_iov_loc = 0; - u32 iov_count = 0, per_iov_bytes = 0; - u32 *tx_marker, old_tx_marker = 0; - struct kvec *iov_record; - - memset(&tx_marker_val, 0, - count->ss_marker_count * sizeof(u32)); - memset(&iov, 0, count->ss_iov_count * sizeof(struct kvec)); - - iov_record = count->iov; - orig_iov_count = count->iov_count; - tx_marker = &conn->if_marker; - - i = 0; - size = data; - orig_iov_len = iov_record[orig_iov_loc].iov_len; - while (size > 0) { - pr_debug("tx_data: #1 orig_iov_len %u," - " orig_iov_loc %u\n", orig_iov_len, orig_iov_loc); - pr_debug("tx_data: #2 tx_marker %u, size" - " %u\n", *tx_marker, size); - - if (orig_iov_len >= *tx_marker) { - iov[iov_count].iov_len = *tx_marker; - iov[iov_count++].iov_base = - (iov_record[orig_iov_loc].iov_base + - per_iov_bytes); - - tx_marker_val[tx_marker_iov] = - (size - *tx_marker); - iov[iov_count].iov_len = (MARKER_SIZE / 2); - iov[iov_count++].iov_base = - &tx_marker_val[tx_marker_iov++]; - iov[iov_count].iov_len = (MARKER_SIZE / 2); - iov[iov_count++].iov_base = - &tx_marker_val[tx_marker_iov++]; - old_tx_marker = *tx_marker; - - /* - * IFMarkInt is in 32-bit words. - */ - *tx_marker = (conn->conn_ops->IFMarkInt * 4); - size -= old_tx_marker; - orig_iov_len -= old_tx_marker; - per_iov_bytes += old_tx_marker; - - pr_debug("tx_data: #3 new_tx_marker" - " %u, size %u\n", *tx_marker, size); - pr_debug("tx_data: #4 offset %u\n", - tx_marker_val[tx_marker_iov-1]); - } else { - iov[iov_count].iov_len = orig_iov_len; - iov[iov_count++].iov_base - = (iov_record[orig_iov_loc].iov_base + - per_iov_bytes); - - per_iov_bytes = 0; - *tx_marker -= orig_iov_len; - size -= orig_iov_len; - - if (size) - orig_iov_len = - iov_record[++orig_iov_loc].iov_len; - - pr_debug("tx_data: #5 new_tx_marker" - " %u, size %u\n", *tx_marker, size); - } - } - - data += (tx_marker_iov * (MARKER_SIZE / 2)); - - iov_p = &iov[0]; - iov_len = iov_count; - - if (iov_count > count->ss_iov_count) { - pr_err("iov_count: %d, count->ss_iov_count:" - " %d\n", iov_count, count->ss_iov_count); - return -1; - } - if (tx_marker_iov > count->ss_marker_count) { - pr_err("tx_marker_iov: %d, count->ss_marker" - "_count: %d\n", tx_marker_iov, - count->ss_marker_count); - return -1; - } - } else { - iov_p = count->iov; - iov_len = count->iov_count; - } + iov_p = count->iov; + iov_len = count->iov_count; while (total_tx < data) { tx_loop = kernel_sendmsg(conn->sock, &msg, iov_p, iov_len, @@ -1679,9 +1466,6 @@ static int iscsit_do_tx_data( tx_loop, total_tx, data); } - if (count->sync_and_steering) - total_tx -= (tx_marker_iov * (MARKER_SIZE / 2)); - return total_tx; } @@ -1702,12 +1486,6 @@ int rx_data( c.data_length = data; c.type = ISCSI_RX_DATA; - if (conn->conn_ops->OFMarker && - (conn->conn_state >= TARG_CONN_STATE_LOGGED_IN)) { - if (iscsit_determine_sync_and_steering_counts(conn, &c) < 0) - return -1; - } - return iscsit_do_rx_data(conn, &c); } @@ -1728,12 +1506,6 @@ int tx_data( c.data_length = data; c.type = ISCSI_TX_DATA; - if (conn->conn_ops->IFMarker && - (conn->conn_state >= TARG_CONN_STATE_LOGGED_IN)) { - if (iscsit_determine_sync_and_steering_counts(conn, &c) < 0) - return -1; - } - return iscsit_do_tx_data(conn, &c); } diff --git a/drivers/target/target_core_cdb.c b/drivers/target/target_core_cdb.c index 89ae923..f04d4ef 100644 --- a/drivers/target/target_core_cdb.c +++ b/drivers/target/target_core_cdb.c @@ -24,6 +24,7 @@ */ #include <linux/kernel.h> +#include <linux/ctype.h> #include <asm/unaligned.h> #include <scsi/scsi.h> @@ -154,6 +155,37 @@ target_emulate_evpd_80(struct se_cmd *cmd, unsigned char *buf) return 0; } +static void +target_parse_naa_6h_vendor_specific(struct se_device *dev, unsigned char *buf_off) +{ + unsigned char *p = &dev->se_sub_dev->t10_wwn.unit_serial[0]; + unsigned char *buf = buf_off; + int cnt = 0, next = 1; + /* + * Generate up to 36 bits of VENDOR SPECIFIC IDENTIFIER starting on + * byte 3 bit 3-0 for NAA IEEE Registered Extended DESIGNATOR field + * format, followed by 64 bits of VENDOR SPECIFIC IDENTIFIER EXTENSION + * to complete the payload. These are based from VPD=0x80 PRODUCT SERIAL + * NUMBER set via vpd_unit_serial in target_core_configfs.c to ensure + * per device uniqeness. + */ + while (*p != '\0') { + if (cnt >= 13) + break; + if (!isxdigit(*p)) { + p++; + continue; + } + if (next != 0) { + buf[cnt++] |= hex_to_bin(*p++); + next = 0; + } else { + buf[cnt] = hex_to_bin(*p++) << 4; + next = 1; + } + } +} + /* * Device identification VPD, for a complete list of * DESIGNATOR TYPEs see spc4r17 Table 459. @@ -219,8 +251,7 @@ target_emulate_evpd_83(struct se_cmd *cmd, unsigned char *buf) * VENDOR_SPECIFIC_IDENTIFIER and * VENDOR_SPECIFIC_IDENTIFIER_EXTENTION */ - buf[off++] |= hex_to_bin(dev->se_sub_dev->t10_wwn.unit_serial[0]); - hex2bin(&buf[off], &dev->se_sub_dev->t10_wwn.unit_serial[1], 12); + target_parse_naa_6h_vendor_specific(dev, &buf[off]); len = 20; off = (len + 4); diff --git a/drivers/target/target_core_transport.c b/drivers/target/target_core_transport.c index 8d0c58e..a4b0a8d 100644 --- a/drivers/target/target_core_transport.c +++ b/drivers/target/target_core_transport.c @@ -977,15 +977,17 @@ static void target_qf_do_work(struct work_struct *work) { struct se_device *dev = container_of(work, struct se_device, qf_work_queue); + LIST_HEAD(qf_cmd_list); struct se_cmd *cmd, *cmd_tmp; spin_lock_irq(&dev->qf_cmd_lock); - list_for_each_entry_safe(cmd, cmd_tmp, &dev->qf_cmd_list, se_qf_node) { + list_splice_init(&dev->qf_cmd_list, &qf_cmd_list); + spin_unlock_irq(&dev->qf_cmd_lock); + list_for_each_entry_safe(cmd, cmd_tmp, &qf_cmd_list, se_qf_node) { list_del(&cmd->se_qf_node); atomic_dec(&dev->dev_qf_count); smp_mb__after_atomic_dec(); - spin_unlock_irq(&dev->qf_cmd_lock); pr_debug("Processing %s cmd: %p QUEUE_FULL in work queue" " context: %s\n", cmd->se_tfo->get_fabric_name(), cmd, @@ -997,10 +999,7 @@ static void target_qf_do_work(struct work_struct *work) * has been added to head of queue */ transport_add_cmd_to_queue(cmd, cmd->t_state); - - spin_lock_irq(&dev->qf_cmd_lock); } - spin_unlock_irq(&dev->qf_cmd_lock); } unsigned char *transport_dump_cmd_direction(struct se_cmd *cmd) diff --git a/drivers/target/tcm_fc/tcm_fc.h b/drivers/target/tcm_fc/tcm_fc.h index bd4fe21..3749d8b 100644 --- a/drivers/target/tcm_fc/tcm_fc.h +++ b/drivers/target/tcm_fc/tcm_fc.h @@ -98,8 +98,7 @@ struct ft_tpg { struct list_head list; /* linkage in ft_lport_acl tpg_list */ struct list_head lun_list; /* head of LUNs */ struct se_portal_group se_tpg; - struct task_struct *thread; /* processing thread */ - struct se_queue_obj qobj; /* queue for processing thread */ + struct workqueue_struct *workqueue; }; struct ft_lport_acl { @@ -110,16 +109,10 @@ struct ft_lport_acl { struct se_wwn fc_lport_wwn; }; -enum ft_cmd_state { - FC_CMD_ST_NEW = 0, - FC_CMD_ST_REJ -}; - /* * Commands */ struct ft_cmd { - enum ft_cmd_state state; u32 lun; /* LUN from request */ struct ft_sess *sess; /* session held for cmd */ struct fc_seq *seq; /* sequence in exchange mgr */ @@ -127,7 +120,7 @@ struct ft_cmd { struct fc_frame *req_frame; unsigned char *cdb; /* pointer to CDB inside frame */ u32 write_data_len; /* data received on writes */ - struct se_queue_req se_req; + struct work_struct work; /* Local sense buffer */ unsigned char ft_sense_buffer[TRANSPORT_SENSE_BUFFER]; u32 was_ddp_setup:1; /* Set only if ddp is setup */ @@ -177,7 +170,6 @@ int ft_is_state_remove(struct se_cmd *); /* * other internal functions. */ -int ft_thread(void *); void ft_recv_req(struct ft_sess *, struct fc_frame *); struct ft_tpg *ft_lport_find_tpg(struct fc_lport *); struct ft_node_acl *ft_acl_get(struct ft_tpg *, struct fc_rport_priv *); diff --git a/drivers/target/tcm_fc/tfc_cmd.c b/drivers/target/tcm_fc/tfc_cmd.c index 5654dc2..80fbcde 100644 --- a/drivers/target/tcm_fc/tfc_cmd.c +++ b/drivers/target/tcm_fc/tfc_cmd.c @@ -62,8 +62,8 @@ void ft_dump_cmd(struct ft_cmd *cmd, const char *caller) int count; se_cmd = &cmd->se_cmd; - pr_debug("%s: cmd %p state %d sess %p seq %p se_cmd %p\n", - caller, cmd, cmd->state, cmd->sess, cmd->seq, se_cmd); + pr_debug("%s: cmd %p sess %p seq %p se_cmd %p\n", + caller, cmd, cmd->sess, cmd->seq, se_cmd); pr_debug("%s: cmd %p cdb %p\n", caller, cmd, cmd->cdb); pr_debug("%s: cmd %p lun %d\n", caller, cmd, cmd->lun); @@ -90,38 +90,6 @@ void ft_dump_cmd(struct ft_cmd *cmd, const char *caller) 16, 4, cmd->cdb, MAX_COMMAND_SIZE, 0); } -static void ft_queue_cmd(struct ft_sess *sess, struct ft_cmd *cmd) -{ - struct ft_tpg *tpg = sess->tport->tpg; - struct se_queue_obj *qobj = &tpg->qobj; - unsigned long flags; - - qobj = &sess->tport->tpg->qobj; - spin_lock_irqsave(&qobj->cmd_queue_lock, flags); - list_add_tail(&cmd->se_req.qr_list, &qobj->qobj_list); - atomic_inc(&qobj->queue_cnt); - spin_unlock_irqrestore(&qobj->cmd_queue_lock, flags); - - wake_up_process(tpg->thread); -} - -static struct ft_cmd *ft_dequeue_cmd(struct se_queue_obj *qobj) -{ - unsigned long flags; - struct se_queue_req *qr; - - spin_lock_irqsave(&qobj->cmd_queue_lock, flags); - if (list_empty(&qobj->qobj_list)) { - spin_unlock_irqrestore(&qobj->cmd_queue_lock, flags); - return NULL; - } - qr = list_first_entry(&qobj->qobj_list, struct se_queue_req, qr_list); - list_del(&qr->qr_list); - atomic_dec(&qobj->queue_cnt); - spin_unlock_irqrestore(&qobj->cmd_queue_lock, flags); - return container_of(qr, struct ft_cmd, se_req); -} - static void ft_free_cmd(struct ft_cmd *cmd) { struct fc_frame *fp; @@ -282,9 +250,7 @@ u32 ft_get_task_tag(struct se_cmd *se_cmd) int ft_get_cmd_state(struct se_cmd *se_cmd) { - struct ft_cmd *cmd = container_of(se_cmd, struct ft_cmd, se_cmd); - - return cmd->state; + return 0; } int ft_is_state_remove(struct se_cmd *se_cmd) @@ -505,6 +471,8 @@ int ft_queue_tm_resp(struct se_cmd *se_cmd) return 0; } +static void ft_send_work(struct work_struct *work); + /* * Handle incoming FCP command. */ @@ -523,7 +491,9 @@ static void ft_recv_cmd(struct ft_sess *sess, struct fc_frame *fp) goto busy; } cmd->req_frame = fp; /* hold frame during cmd */ - ft_queue_cmd(sess, cmd); + + INIT_WORK(&cmd->work, ft_send_work); + queue_work(sess->tport->tpg->workqueue, &cmd->work); return; busy: @@ -563,12 +533,13 @@ void ft_recv_req(struct ft_sess *sess, struct fc_frame *fp) /* * Send new command to target. */ -static void ft_send_cmd(struct ft_cmd *cmd) +static void ft_send_work(struct work_struct *work) { + struct ft_cmd *cmd = container_of(work, struct ft_cmd, work); struct fc_frame_header *fh = fc_frame_header_get(cmd->req_frame); struct se_cmd *se_cmd; struct fcp_cmnd *fcp; - int data_dir; + int data_dir = 0; u32 data_len; int task_attr; int ret; @@ -675,42 +646,3 @@ static void ft_send_cmd(struct ft_cmd *cmd) err: ft_send_resp_code_and_free(cmd, FCP_CMND_FIELDS_INVALID); } - -/* - * Handle request in the command thread. - */ -static void ft_exec_req(struct ft_cmd *cmd) -{ - pr_debug("cmd state %x\n", cmd->state); - switch (cmd->state) { - case FC_CMD_ST_NEW: - ft_send_cmd(cmd); - break; - default: - break; - } -} - -/* - * Processing thread. - * Currently one thread per tpg. - */ -int ft_thread(void *arg) -{ - struct ft_tpg *tpg = arg; - struct se_queue_obj *qobj = &tpg->qobj; - struct ft_cmd *cmd; - - while (!kthread_should_stop()) { - schedule_timeout_interruptible(MAX_SCHEDULE_TIMEOUT); - if (kthread_should_stop()) - goto out; - - cmd = ft_dequeue_cmd(qobj); - if (cmd) - ft_exec_req(cmd); - } - -out: - return 0; -} diff --git a/drivers/target/tcm_fc/tfc_conf.c b/drivers/target/tcm_fc/tfc_conf.c index b15879d..8fa39b7 100644 --- a/drivers/target/tcm_fc/tfc_conf.c +++ b/drivers/target/tcm_fc/tfc_conf.c @@ -327,7 +327,6 @@ static struct se_portal_group *ft_add_tpg( tpg->index = index; tpg->lport_acl = lacl; INIT_LIST_HEAD(&tpg->lun_list); - transport_init_queue_obj(&tpg->qobj); ret = core_tpg_register(&ft_configfs->tf_ops, wwn, &tpg->se_tpg, tpg, TRANSPORT_TPG_TYPE_NORMAL); @@ -336,8 +335,8 @@ static struct se_portal_group *ft_add_tpg( return NULL; } - tpg->thread = kthread_run(ft_thread, tpg, "ft_tpg%lu", index); - if (IS_ERR(tpg->thread)) { + tpg->workqueue = alloc_workqueue("tcm_fc", 0, 1); + if (!tpg->workqueue) { kfree(tpg); return NULL; } @@ -356,7 +355,7 @@ static void ft_del_tpg(struct se_portal_group *se_tpg) pr_debug("del tpg %s\n", config_item_name(&tpg->se_tpg.tpg_group.cg_item)); - kthread_stop(tpg->thread); + destroy_workqueue(tpg->workqueue); /* Wait for sessions to be freed thru RCU, for BUG_ON below */ synchronize_rcu(); diff --git a/drivers/target/tcm_fc/tfc_io.c b/drivers/target/tcm_fc/tfc_io.c index c37f4cd..d35ea5a 100644 --- a/drivers/target/tcm_fc/tfc_io.c +++ b/drivers/target/tcm_fc/tfc_io.c @@ -219,43 +219,41 @@ void ft_recv_write_data(struct ft_cmd *cmd, struct fc_frame *fp) if (cmd->was_ddp_setup) { BUG_ON(!ep); BUG_ON(!lport); - } - - /* - * Doesn't expect payload if DDP is setup. Payload - * is expected to be copied directly to user buffers - * due to DDP (Large Rx offload), - */ - buf = fc_frame_payload_get(fp, 1); - if (buf) - pr_err("%s: xid 0x%x, f_ctl 0x%x, cmd->sg %p, " + /* + * Since DDP (Large Rx offload) was setup for this request, + * payload is expected to be copied directly to user buffers. + */ + buf = fc_frame_payload_get(fp, 1); + if (buf) + pr_err("%s: xid 0x%x, f_ctl 0x%x, cmd->sg %p, " "cmd->sg_cnt 0x%x. DDP was setup" " hence not expected to receive frame with " - "payload, Frame will be dropped if " - "'Sequence Initiative' bit in f_ctl is " + "payload, Frame will be dropped if" + "'Sequence Initiative' bit in f_ctl is" "not set\n", __func__, ep->xid, f_ctl, cmd->sg, cmd->sg_cnt); - /* - * Invalidate HW DDP context if it was setup for respective - * command. Invalidation of HW DDP context is requited in both - * situation (success and error). - */ - ft_invl_hw_context(cmd); + /* + * Invalidate HW DDP context if it was setup for respective + * command. Invalidation of HW DDP context is requited in both + * situation (success and error). + */ + ft_invl_hw_context(cmd); - /* - * If "Sequence Initiative (TSI)" bit set in f_ctl, means last - * write data frame is received successfully where payload is - * posted directly to user buffer and only the last frame's - * header is posted in receive queue. - * - * If "Sequence Initiative (TSI)" bit is not set, means error - * condition w.r.t. DDP, hence drop the packet and let explict - * ABORTS from other end of exchange timer trigger the recovery. - */ - if (f_ctl & FC_FC_SEQ_INIT) - goto last_frame; - else - goto drop; + /* + * If "Sequence Initiative (TSI)" bit set in f_ctl, means last + * write data frame is received successfully where payload is + * posted directly to user buffer and only the last frame's + * header is posted in receive queue. + * + * If "Sequence Initiative (TSI)" bit is not set, means error + * condition w.r.t. DDP, hence drop the packet and let explict + * ABORTS from other end of exchange timer trigger the recovery. + */ + if (f_ctl & FC_FC_SEQ_INIT) + goto last_frame; + else + goto drop; + } rel_off = ntohl(fh->fh_parm_offset); frame_len = fr_len(fp); diff --git a/drivers/tty/serial/crisv10.c b/drivers/tty/serial/crisv10.c index 225123b..58be715 100644 --- a/drivers/tty/serial/crisv10.c +++ b/drivers/tty/serial/crisv10.c @@ -4450,7 +4450,7 @@ static int __init rs_init(void) #if defined(CONFIG_ETRAX_RS485) #if defined(CONFIG_ETRAX_RS485_ON_PA) - if (cris_io_interface_allocate_pins(if_ser0, 'a', rs485_pa_bit, + if (cris_io_interface_allocate_pins(if_serial_0, 'a', rs485_pa_bit, rs485_pa_bit)) { printk(KERN_CRIT "ETRAX100LX serial: Could not allocate " "RS485 pin\n"); @@ -4459,7 +4459,7 @@ static int __init rs_init(void) } #endif #if defined(CONFIG_ETRAX_RS485_ON_PORT_G) - if (cris_io_interface_allocate_pins(if_ser0, 'g', rs485_pa_bit, + if (cris_io_interface_allocate_pins(if_serial_0, 'g', rs485_pa_bit, rs485_port_g_bit)) { printk(KERN_CRIT "ETRAX100LX serial: Could not allocate " "RS485 pin\n"); diff --git a/drivers/usb/host/xhci-hub.c b/drivers/usb/host/xhci-hub.c index 1e96d1f..723f823 100644 --- a/drivers/usb/host/xhci-hub.c +++ b/drivers/usb/host/xhci-hub.c @@ -761,7 +761,7 @@ int xhci_hub_status_data(struct usb_hcd *hcd, char *buf) memset(buf, 0, retval); status = 0; - mask = PORT_CSC | PORT_PEC | PORT_OCC | PORT_PLC; + mask = PORT_CSC | PORT_PEC | PORT_OCC | PORT_PLC | PORT_WRC; spin_lock_irqsave(&xhci->lock, flags); /* For each port, did anything change? If so, set that bit in buf. */ diff --git a/drivers/usb/host/xhci-ring.c b/drivers/usb/host/xhci-ring.c index 54139a2..952e2de 100644 --- a/drivers/usb/host/xhci-ring.c +++ b/drivers/usb/host/xhci-ring.c @@ -1934,8 +1934,10 @@ static int handle_tx_event(struct xhci_hcd *xhci, int status = -EINPROGRESS; struct urb_priv *urb_priv; struct xhci_ep_ctx *ep_ctx; + struct list_head *tmp; u32 trb_comp_code; int ret = 0; + int td_num = 0; slot_id = TRB_TO_SLOT_ID(le32_to_cpu(event->flags)); xdev = xhci->devs[slot_id]; @@ -1957,6 +1959,12 @@ static int handle_tx_event(struct xhci_hcd *xhci, return -ENODEV; } + /* Count current td numbers if ep->skip is set */ + if (ep->skip) { + list_for_each(tmp, &ep_ring->td_list) + td_num++; + } + event_dma = le64_to_cpu(event->buffer); trb_comp_code = GET_COMP_CODE(le32_to_cpu(event->transfer_len)); /* Look for common error cases */ @@ -2068,7 +2076,18 @@ static int handle_tx_event(struct xhci_hcd *xhci, goto cleanup; } + /* We've skipped all the TDs on the ep ring when ep->skip set */ + if (ep->skip && td_num == 0) { + ep->skip = false; + xhci_dbg(xhci, "All tds on the ep_ring skipped. " + "Clear skip flag.\n"); + ret = 0; + goto cleanup; + } + td = list_entry(ep_ring->td_list.next, struct xhci_td, td_list); + if (ep->skip) + td_num--; /* Is this a TRB in the currently executing TD? */ event_seg = trb_in_td(ep_ring->deq_seg, ep_ring->dequeue, diff --git a/drivers/watchdog/hpwdt.c b/drivers/watchdog/hpwdt.c index 410fba4..809cbda 100644 --- a/drivers/watchdog/hpwdt.c +++ b/drivers/watchdog/hpwdt.c @@ -494,15 +494,16 @@ static int hpwdt_pretimeout(struct notifier_block *nb, unsigned long ulReason, asminline_call(&cmn_regs, cru_rom_addr); die_nmi_called = 1; spin_unlock_irqrestore(&rom_lock, rom_pl); + + if (allow_kdump) + hpwdt_stop(); + if (!is_icru) { if (cmn_regs.u1.ral == 0) { - printk(KERN_WARNING "hpwdt: An NMI occurred, " + panic("An NMI occurred, " "but unable to determine source.\n"); } } - - if (allow_kdump) - hpwdt_stop(); panic("An NMI occurred, please see the Integrated " "Management Log for details.\n"); diff --git a/drivers/watchdog/lantiq_wdt.c b/drivers/watchdog/lantiq_wdt.c index 7d82ada..102aed0 100644 --- a/drivers/watchdog/lantiq_wdt.c +++ b/drivers/watchdog/lantiq_wdt.c @@ -51,16 +51,16 @@ static int ltq_wdt_ok_to_close; static void ltq_wdt_enable(void) { - ltq_wdt_timeout = ltq_wdt_timeout * + unsigned long int timeout = ltq_wdt_timeout * (ltq_io_region_clk_rate / LTQ_WDT_DIVIDER) + 0x1000; - if (ltq_wdt_timeout > LTQ_MAX_TIMEOUT) - ltq_wdt_timeout = LTQ_MAX_TIMEOUT; + if (timeout > LTQ_MAX_TIMEOUT) + timeout = LTQ_MAX_TIMEOUT; /* write the first password magic */ ltq_w32(LTQ_WDT_PW1, ltq_wdt_membase + LTQ_WDT_CR); /* write the second magic plus the configuration and new timeout */ ltq_w32(LTQ_WDT_SR_EN | LTQ_WDT_SR_PWD | LTQ_WDT_SR_CLKDIV | - LTQ_WDT_PW2 | ltq_wdt_timeout, ltq_wdt_membase + LTQ_WDT_CR); + LTQ_WDT_PW2 | timeout, ltq_wdt_membase + LTQ_WDT_CR); } static void diff --git a/drivers/watchdog/sbc_epx_c3.c b/drivers/watchdog/sbc_epx_c3.c index 3066a51..eaca366 100644 --- a/drivers/watchdog/sbc_epx_c3.c +++ b/drivers/watchdog/sbc_epx_c3.c @@ -173,7 +173,7 @@ static struct notifier_block epx_c3_notifier = { .notifier_call = epx_c3_notify_sys, }; -static const char banner[] __initdata = KERN_INFO PFX +static const char banner[] __initconst = KERN_INFO PFX "Hardware Watchdog Timer for Winsystems EPX-C3 SBC: 0.1\n"; static int __init watchdog_init(void) diff --git a/drivers/watchdog/watchdog_dev.c b/drivers/watchdog/watchdog_dev.c index d33520d..1199da0 100644 --- a/drivers/watchdog/watchdog_dev.c +++ b/drivers/watchdog/watchdog_dev.c @@ -59,7 +59,7 @@ static struct watchdog_device *wdd; static int watchdog_ping(struct watchdog_device *wddev) { - if (test_bit(WDOG_ACTIVE, &wdd->status)) { + if (test_bit(WDOG_ACTIVE, &wddev->status)) { if (wddev->ops->ping) return wddev->ops->ping(wddev); /* ping the watchdog */ else @@ -81,12 +81,12 @@ static int watchdog_start(struct watchdog_device *wddev) { int err; - if (!test_bit(WDOG_ACTIVE, &wdd->status)) { + if (!test_bit(WDOG_ACTIVE, &wddev->status)) { err = wddev->ops->start(wddev); if (err < 0) return err; - set_bit(WDOG_ACTIVE, &wdd->status); + set_bit(WDOG_ACTIVE, &wddev->status); } return 0; } @@ -105,18 +105,18 @@ static int watchdog_stop(struct watchdog_device *wddev) { int err = -EBUSY; - if (test_bit(WDOG_NO_WAY_OUT, &wdd->status)) { + if (test_bit(WDOG_NO_WAY_OUT, &wddev->status)) { pr_info("%s: nowayout prevents watchdog to be stopped!\n", - wdd->info->identity); + wddev->info->identity); return err; } - if (test_bit(WDOG_ACTIVE, &wdd->status)) { + if (test_bit(WDOG_ACTIVE, &wddev->status)) { err = wddev->ops->stop(wddev); if (err < 0) return err; - clear_bit(WDOG_ACTIVE, &wdd->status); + clear_bit(WDOG_ACTIVE, &wddev->status); } return 0; } diff --git a/drivers/xen/events.c b/drivers/xen/events.c index da70f5c..7523719 100644 --- a/drivers/xen/events.c +++ b/drivers/xen/events.c @@ -54,7 +54,7 @@ * This lock protects updates to the following mapping and reference-count * arrays. The lock does not need to be acquired to read the mapping tables. */ -static DEFINE_SPINLOCK(irq_mapping_update_lock); +static DEFINE_MUTEX(irq_mapping_update_lock); static LIST_HEAD(xen_irq_list_head); @@ -631,7 +631,7 @@ int xen_bind_pirq_gsi_to_irq(unsigned gsi, int irq = -1; struct physdev_irq irq_op; - spin_lock(&irq_mapping_update_lock); + mutex_lock(&irq_mapping_update_lock); irq = find_irq_by_gsi(gsi); if (irq != -1) { @@ -684,7 +684,7 @@ int xen_bind_pirq_gsi_to_irq(unsigned gsi, handle_edge_irq, name); out: - spin_unlock(&irq_mapping_update_lock); + mutex_unlock(&irq_mapping_update_lock); return irq; } @@ -710,7 +710,7 @@ int xen_bind_pirq_msi_to_irq(struct pci_dev *dev, struct msi_desc *msidesc, { int irq, ret; - spin_lock(&irq_mapping_update_lock); + mutex_lock(&irq_mapping_update_lock); irq = xen_allocate_irq_dynamic(); if (irq == -1) @@ -724,10 +724,10 @@ int xen_bind_pirq_msi_to_irq(struct pci_dev *dev, struct msi_desc *msidesc, if (ret < 0) goto error_irq; out: - spin_unlock(&irq_mapping_update_lock); + mutex_unlock(&irq_mapping_update_lock); return irq; error_irq: - spin_unlock(&irq_mapping_update_lock); + mutex_unlock(&irq_mapping_update_lock); xen_free_irq(irq); return -1; } @@ -740,7 +740,7 @@ int xen_destroy_irq(int irq) struct irq_info *info = info_for_irq(irq); int rc = -ENOENT; - spin_lock(&irq_mapping_update_lock); + mutex_lock(&irq_mapping_update_lock); desc = irq_to_desc(irq); if (!desc) @@ -766,7 +766,7 @@ int xen_destroy_irq(int irq) xen_free_irq(irq); out: - spin_unlock(&irq_mapping_update_lock); + mutex_unlock(&irq_mapping_update_lock); return rc; } @@ -776,7 +776,7 @@ int xen_irq_from_pirq(unsigned pirq) struct irq_info *info; - spin_lock(&irq_mapping_update_lock); + mutex_lock(&irq_mapping_update_lock); list_for_each_entry(info, &xen_irq_list_head, list) { if (info == NULL || info->type != IRQT_PIRQ) @@ -787,7 +787,7 @@ int xen_irq_from_pirq(unsigned pirq) } irq = -1; out: - spin_unlock(&irq_mapping_update_lock); + mutex_unlock(&irq_mapping_update_lock); return irq; } @@ -802,7 +802,7 @@ int bind_evtchn_to_irq(unsigned int evtchn) { int irq; - spin_lock(&irq_mapping_update_lock); + mutex_lock(&irq_mapping_update_lock); irq = evtchn_to_irq[evtchn]; @@ -818,7 +818,7 @@ int bind_evtchn_to_irq(unsigned int evtchn) } out: - spin_unlock(&irq_mapping_update_lock); + mutex_unlock(&irq_mapping_update_lock); return irq; } @@ -829,7 +829,7 @@ static int bind_ipi_to_irq(unsigned int ipi, unsigned int cpu) struct evtchn_bind_ipi bind_ipi; int evtchn, irq; - spin_lock(&irq_mapping_update_lock); + mutex_lock(&irq_mapping_update_lock); irq = per_cpu(ipi_to_irq, cpu)[ipi]; @@ -853,7 +853,7 @@ static int bind_ipi_to_irq(unsigned int ipi, unsigned int cpu) } out: - spin_unlock(&irq_mapping_update_lock); + mutex_unlock(&irq_mapping_update_lock); return irq; } @@ -878,7 +878,7 @@ int bind_virq_to_irq(unsigned int virq, unsigned int cpu) struct evtchn_bind_virq bind_virq; int evtchn, irq; - spin_lock(&irq_mapping_update_lock); + mutex_lock(&irq_mapping_update_lock); irq = per_cpu(virq_to_irq, cpu)[virq]; @@ -903,7 +903,7 @@ int bind_virq_to_irq(unsigned int virq, unsigned int cpu) } out: - spin_unlock(&irq_mapping_update_lock); + mutex_unlock(&irq_mapping_update_lock); return irq; } @@ -913,7 +913,7 @@ static void unbind_from_irq(unsigned int irq) struct evtchn_close close; int evtchn = evtchn_from_irq(irq); - spin_lock(&irq_mapping_update_lock); + mutex_lock(&irq_mapping_update_lock); if (VALID_EVTCHN(evtchn)) { close.port = evtchn; @@ -943,7 +943,7 @@ static void unbind_from_irq(unsigned int irq) xen_free_irq(irq); - spin_unlock(&irq_mapping_update_lock); + mutex_unlock(&irq_mapping_update_lock); } int bind_evtchn_to_irqhandler(unsigned int evtchn, @@ -1279,7 +1279,7 @@ void rebind_evtchn_irq(int evtchn, int irq) will also be masked. */ disable_irq(irq); - spin_lock(&irq_mapping_update_lock); + mutex_lock(&irq_mapping_update_lock); /* After resume the irq<->evtchn mappings are all cleared out */ BUG_ON(evtchn_to_irq[evtchn] != -1); @@ -1289,7 +1289,7 @@ void rebind_evtchn_irq(int evtchn, int irq) xen_irq_info_evtchn_init(irq, evtchn); - spin_unlock(&irq_mapping_update_lock); + mutex_unlock(&irq_mapping_update_lock); /* new event channels are always bound to cpu 0 */ irq_set_affinity(irq, cpumask_of(0)); diff --git a/drivers/zorro/zorro.c b/drivers/zorro/zorro.c index e0c2807..181fa81 100644 --- a/drivers/zorro/zorro.c +++ b/drivers/zorro/zorro.c @@ -148,10 +148,10 @@ static int __init amiga_zorro_probe(struct platform_device *pdev) } platform_set_drvdata(pdev, bus); - /* Register all devices */ pr_info("Zorro: Probing AutoConfig expansion devices: %u device%s\n", zorro_num_autocon, zorro_num_autocon == 1 ? "" : "s"); + /* First identify all devices ... */ for (i = 0; i < zorro_num_autocon; i++) { z = &zorro_autocon[i]; z->id = (z->rom.er_Manufacturer<<16) | (z->rom.er_Product<<8); @@ -172,6 +172,11 @@ static int __init amiga_zorro_probe(struct platform_device *pdev) dev_set_name(&z->dev, "%02x", i); z->dev.parent = &bus->dev; z->dev.bus = &zorro_bus_type; + } + + /* ... then register them */ + for (i = 0; i < zorro_num_autocon; i++) { + z = &zorro_autocon[i]; error = device_register(&z->dev); if (error) { dev_err(&bus->dev, "Error registering device %s\n", diff --git a/fs/btrfs/file.c b/fs/btrfs/file.c index 3c3abff..a381cd2 100644 --- a/fs/btrfs/file.c +++ b/fs/btrfs/file.c @@ -1817,6 +1817,11 @@ static loff_t btrfs_file_llseek(struct file *file, loff_t offset, int origin) goto out; case SEEK_DATA: case SEEK_HOLE: + if (offset >= i_size_read(inode)) { + mutex_unlock(&inode->i_mutex); + return -ENXIO; + } + ret = find_desired_extent(inode, &offset, origin); if (ret) { mutex_unlock(&inode->i_mutex); @@ -1825,11 +1830,11 @@ static loff_t btrfs_file_llseek(struct file *file, loff_t offset, int origin) } if (offset < 0 && !(file->f_mode & FMODE_UNSIGNED_OFFSET)) { - ret = -EINVAL; + offset = -EINVAL; goto out; } if (offset > inode->i_sb->s_maxbytes) { - ret = -EINVAL; + offset = -EINVAL; goto out; } diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c index 4d14de6..b2d004a 100644 --- a/fs/btrfs/inode.c +++ b/fs/btrfs/inode.c @@ -4018,7 +4018,8 @@ struct inode *btrfs_lookup_dentry(struct inode *dir, struct dentry *dentry) memcpy(&location, dentry->d_fsdata, sizeof(struct btrfs_key)); kfree(dentry->d_fsdata); dentry->d_fsdata = NULL; - d_clear_need_lookup(dentry); + /* This thing is hashed, drop it for now */ + d_drop(dentry); } else { ret = btrfs_inode_by_name(dir, dentry, &location); } @@ -4085,7 +4086,15 @@ static void btrfs_dentry_release(struct dentry *dentry) static struct dentry *btrfs_lookup(struct inode *dir, struct dentry *dentry, struct nameidata *nd) { - return d_splice_alias(btrfs_lookup_dentry(dir, dentry), dentry); + struct dentry *ret; + + ret = d_splice_alias(btrfs_lookup_dentry(dir, dentry), dentry); + if (unlikely(d_need_lookup(dentry))) { + spin_lock(&dentry->d_lock); + dentry->d_flags &= ~DCACHE_NEED_LOOKUP; + spin_unlock(&dentry->d_lock); + } + return ret; } unsigned char btrfs_filetype_table[] = { @@ -4125,7 +4134,8 @@ static int btrfs_real_readdir(struct file *filp, void *dirent, /* special case for "." */ if (filp->f_pos == 0) { - over = filldir(dirent, ".", 1, 1, btrfs_ino(inode), DT_DIR); + over = filldir(dirent, ".", 1, + filp->f_pos, btrfs_ino(inode), DT_DIR); if (over) return 0; filp->f_pos = 1; @@ -4134,7 +4144,7 @@ static int btrfs_real_readdir(struct file *filp, void *dirent, if (filp->f_pos == 1) { u64 pino = parent_ino(filp->f_path.dentry); over = filldir(dirent, "..", 2, - 2, pino, DT_DIR); + filp->f_pos, pino, DT_DIR); if (over) return 0; filp->f_pos = 2; diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c index 3351b1b..538f65a 100644 --- a/fs/btrfs/ioctl.c +++ b/fs/btrfs/ioctl.c @@ -2177,6 +2177,11 @@ static noinline long btrfs_ioctl_clone(struct file *file, unsigned long srcfd, if (!(src_file->f_mode & FMODE_READ)) goto out_fput; + /* don't make the dst file partly checksummed */ + if ((BTRFS_I(src)->flags & BTRFS_INODE_NODATASUM) != + (BTRFS_I(inode)->flags & BTRFS_INODE_NODATASUM)) + goto out_fput; + ret = -EISDIR; if (S_ISDIR(src->i_mode) || S_ISDIR(inode->i_mode)) goto out_fput; @@ -2226,6 +2231,10 @@ static noinline long btrfs_ioctl_clone(struct file *file, unsigned long srcfd, goto out_unlock; } + /* truncate page cache pages from target inode range */ + truncate_inode_pages_range(&inode->i_data, destoff, + PAGE_CACHE_ALIGN(destoff + len) - 1); + /* do any pending delalloc/csum calc on src, one way or another, and lock file content */ while (1) { @@ -2242,10 +2251,6 @@ static noinline long btrfs_ioctl_clone(struct file *file, unsigned long srcfd, btrfs_wait_ordered_range(src, off, len); } - /* truncate page cache pages from target inode range */ - truncate_inode_pages_range(&inode->i_data, off, - ALIGN(off + len, PAGE_CACHE_SIZE) - 1); - /* clone data */ key.objectid = btrfs_ino(src); key.type = BTRFS_EXTENT_DATA_KEY; @@ -2323,7 +2328,12 @@ static noinline long btrfs_ioctl_clone(struct file *file, unsigned long srcfd, else new_key.offset = destoff; - trans = btrfs_start_transaction(root, 1); + /* + * 1 - adjusting old extent (we may have to split it) + * 1 - add new extent + * 1 - inode update + */ + trans = btrfs_start_transaction(root, 3); if (IS_ERR(trans)) { ret = PTR_ERR(trans); goto out; @@ -2442,7 +2452,6 @@ static noinline long btrfs_ioctl_clone(struct file *file, unsigned long srcfd, if (endoff > inode->i_size) btrfs_i_size_write(inode, endoff); - BTRFS_I(inode)->flags = BTRFS_I(src)->flags; ret = btrfs_update_inode(trans, root, inode); BUG_ON(ret); btrfs_end_transaction(trans, root); diff --git a/fs/cifs/cifsencrypt.c b/fs/cifs/cifsencrypt.c index e76bfeb..30acd22 100644 --- a/fs/cifs/cifsencrypt.c +++ b/fs/cifs/cifsencrypt.c @@ -351,9 +351,7 @@ static int build_avpair_blob(struct cifs_ses *ses, const struct nls_table *nls_cp) { unsigned int dlen; - unsigned int wlen; - unsigned int size = 6 * sizeof(struct ntlmssp2_name); - __le64 curtime; + unsigned int size = 2 * sizeof(struct ntlmssp2_name); char *defdmname = "WORKGROUP"; unsigned char *blobptr; struct ntlmssp2_name *attrptr; @@ -365,15 +363,14 @@ build_avpair_blob(struct cifs_ses *ses, const struct nls_table *nls_cp) } dlen = strlen(ses->domainName); - wlen = strlen(ses->server->hostname); - /* The length of this blob is a size which is - * six times the size of a structure which holds name/size + - * two times the unicode length of a domain name + - * two times the unicode length of a server name + - * size of a timestamp (which is 8 bytes). + /* + * The length of this blob is two times the size of a + * structure (av pair) which holds name/size + * ( for NTLMSSP_AV_NB_DOMAIN_NAME followed by NTLMSSP_AV_EOL ) + + * unicode length of a netbios domain name */ - ses->auth_key.len = size + 2 * (2 * dlen) + 2 * (2 * wlen) + 8; + ses->auth_key.len = size + 2 * dlen; ses->auth_key.response = kzalloc(ses->auth_key.len, GFP_KERNEL); if (!ses->auth_key.response) { ses->auth_key.len = 0; @@ -384,44 +381,15 @@ build_avpair_blob(struct cifs_ses *ses, const struct nls_table *nls_cp) blobptr = ses->auth_key.response; attrptr = (struct ntlmssp2_name *) blobptr; + /* + * As defined in MS-NTLM 3.3.2, just this av pair field + * is sufficient as part of the temp + */ attrptr->type = cpu_to_le16(NTLMSSP_AV_NB_DOMAIN_NAME); attrptr->length = cpu_to_le16(2 * dlen); blobptr = (unsigned char *)attrptr + sizeof(struct ntlmssp2_name); cifs_strtoUCS((__le16 *)blobptr, ses->domainName, dlen, nls_cp); - blobptr += 2 * dlen; - attrptr = (struct ntlmssp2_name *) blobptr; - - attrptr->type = cpu_to_le16(NTLMSSP_AV_NB_COMPUTER_NAME); - attrptr->length = cpu_to_le16(2 * wlen); - blobptr = (unsigned char *)attrptr + sizeof(struct ntlmssp2_name); - cifs_strtoUCS((__le16 *)blobptr, ses->server->hostname, wlen, nls_cp); - - blobptr += 2 * wlen; - attrptr = (struct ntlmssp2_name *) blobptr; - - attrptr->type = cpu_to_le16(NTLMSSP_AV_DNS_DOMAIN_NAME); - attrptr->length = cpu_to_le16(2 * dlen); - blobptr = (unsigned char *)attrptr + sizeof(struct ntlmssp2_name); - cifs_strtoUCS((__le16 *)blobptr, ses->domainName, dlen, nls_cp); - - blobptr += 2 * dlen; - attrptr = (struct ntlmssp2_name *) blobptr; - - attrptr->type = cpu_to_le16(NTLMSSP_AV_DNS_COMPUTER_NAME); - attrptr->length = cpu_to_le16(2 * wlen); - blobptr = (unsigned char *)attrptr + sizeof(struct ntlmssp2_name); - cifs_strtoUCS((__le16 *)blobptr, ses->server->hostname, wlen, nls_cp); - - blobptr += 2 * wlen; - attrptr = (struct ntlmssp2_name *) blobptr; - - attrptr->type = cpu_to_le16(NTLMSSP_AV_TIMESTAMP); - attrptr->length = cpu_to_le16(sizeof(__le64)); - blobptr = (unsigned char *)attrptr + sizeof(struct ntlmssp2_name); - curtime = cpu_to_le64(cifs_UnixTimeToNT(CURRENT_TIME)); - memcpy(blobptr, &curtime, sizeof(__le64)); - return 0; } diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c index f93eb94..54b8f1e 100644 --- a/fs/cifs/cifsfs.c +++ b/fs/cifs/cifsfs.c @@ -548,6 +548,12 @@ cifs_get_root(struct smb_vol *vol, struct super_block *sb) struct inode *dir = dentry->d_inode; struct dentry *child; + if (!dir) { + dput(dentry); + dentry = ERR_PTR(-ENOENT); + break; + } + /* skip separators */ while (*s == sep) s++; @@ -563,10 +569,6 @@ cifs_get_root(struct smb_vol *vol, struct super_block *sb) mutex_unlock(&dir->i_mutex); dput(dentry); dentry = child; - if (!dentry->d_inode) { - dput(dentry); - dentry = ERR_PTR(-ENOENT); - } } while (!IS_ERR(dentry)); _FreeXid(xid); kfree(full_path); diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c index aac37d9..a80f7bd 100644 --- a/fs/cifs/cifssmb.c +++ b/fs/cifs/cifssmb.c @@ -4079,7 +4079,8 @@ int CIFSFindNext(const int xid, struct cifs_tcon *tcon, T2_FNEXT_RSP_PARMS *parms; char *response_data; int rc = 0; - int bytes_returned, name_len; + int bytes_returned; + unsigned int name_len; __u16 params, byte_count; cFYI(1, "In FindNext"); diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c index 633c246..f4af4cc 100644 --- a/fs/cifs/connect.c +++ b/fs/cifs/connect.c @@ -1298,7 +1298,7 @@ cifs_parse_mount_options(const char *mountdata, const char *devname, /* ignore */ } else if (strnicmp(data, "guest", 5) == 0) { /* ignore */ - } else if (strnicmp(data, "rw", 2) == 0) { + } else if (strnicmp(data, "rw", 2) == 0 && strlen(data) == 2) { /* ignore */ } else if (strnicmp(data, "ro", 2) == 0) { /* ignore */ @@ -1401,7 +1401,7 @@ cifs_parse_mount_options(const char *mountdata, const char *devname, vol->server_ino = 1; } else if (strnicmp(data, "noserverino", 9) == 0) { vol->server_ino = 0; - } else if (strnicmp(data, "rwpidforward", 4) == 0) { + } else if (strnicmp(data, "rwpidforward", 12) == 0) { vol->rwpidforward = 1; } else if (strnicmp(data, "cifsacl", 7) == 0) { vol->cifs_acl = 1; diff --git a/fs/ext3/inode.c b/fs/ext3/inode.c index 04da6ac..12661e1 100644 --- a/fs/ext3/inode.c +++ b/fs/ext3/inode.c @@ -1134,7 +1134,7 @@ struct buffer_head *ext3_bread(handle_t *handle, struct inode *inode, return bh; if (buffer_uptodate(bh)) return bh; - ll_rw_block(READ_META, 1, &bh); + ll_rw_block(READ | REQ_META | REQ_PRIO, 1, &bh); wait_on_buffer(bh); if (buffer_uptodate(bh)) return bh; @@ -2807,7 +2807,7 @@ make_io: trace_ext3_load_inode(inode); get_bh(bh); bh->b_end_io = end_buffer_read_sync; - submit_bh(READ_META, bh); + submit_bh(READ | REQ_META | REQ_PRIO, bh); wait_on_buffer(bh); if (!buffer_uptodate(bh)) { ext3_error(inode->i_sb, "ext3_get_inode_loc", diff --git a/fs/ext3/namei.c b/fs/ext3/namei.c index 5571708..0629e09 100644 --- a/fs/ext3/namei.c +++ b/fs/ext3/namei.c @@ -922,7 +922,8 @@ restart: bh = ext3_getblk(NULL, dir, b++, 0, &err); bh_use[ra_max] = bh; if (bh) - ll_rw_block(READ_META, 1, &bh); + ll_rw_block(READ | REQ_META | REQ_PRIO, + 1, &bh); } } if ((bh = bh_use[ra_ptr++]) == NULL) diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c index 18d2558..986e238 100644 --- a/fs/ext4/inode.c +++ b/fs/ext4/inode.c @@ -647,7 +647,7 @@ struct buffer_head *ext4_bread(handle_t *handle, struct inode *inode, return bh; if (buffer_uptodate(bh)) return bh; - ll_rw_block(READ_META, 1, &bh); + ll_rw_block(READ | REQ_META | REQ_PRIO, 1, &bh); wait_on_buffer(bh); if (buffer_uptodate(bh)) return bh; @@ -3298,7 +3298,7 @@ make_io: trace_ext4_load_inode(inode); get_bh(bh); bh->b_end_io = end_buffer_read_sync; - submit_bh(READ_META, bh); + submit_bh(READ | REQ_META | REQ_PRIO, bh); wait_on_buffer(bh); if (!buffer_uptodate(bh)) { EXT4_ERROR_INODE_BLOCK(inode, block, diff --git a/fs/ext4/namei.c b/fs/ext4/namei.c index f8068c7..1c924fa 100644 --- a/fs/ext4/namei.c +++ b/fs/ext4/namei.c @@ -922,7 +922,8 @@ restart: bh = ext4_getblk(NULL, dir, b++, 0, &err); bh_use[ra_max] = bh; if (bh) - ll_rw_block(READ_META, 1, &bh); + ll_rw_block(READ | REQ_META | REQ_PRIO, + 1, &bh); } } if ((bh = bh_use[ra_ptr++]) == NULL) diff --git a/fs/gfs2/log.c b/fs/gfs2/log.c index 85c6292..5986464 100644 --- a/fs/gfs2/log.c +++ b/fs/gfs2/log.c @@ -624,9 +624,9 @@ static void log_write_header(struct gfs2_sbd *sdp, u32 flags, int pull) bh->b_end_io = end_buffer_write_sync; get_bh(bh); if (test_bit(SDF_NOBARRIERS, &sdp->sd_flags)) - submit_bh(WRITE_SYNC | REQ_META, bh); + submit_bh(WRITE_SYNC | REQ_META | REQ_PRIO, bh); else - submit_bh(WRITE_FLUSH_FUA | REQ_META, bh); + submit_bh(WRITE_FLUSH_FUA | REQ_META | REQ_PRIO, bh); wait_on_buffer(bh); if (!buffer_uptodate(bh)) diff --git a/fs/gfs2/meta_io.c b/fs/gfs2/meta_io.c index 747238c..be29858 100644 --- a/fs/gfs2/meta_io.c +++ b/fs/gfs2/meta_io.c @@ -37,7 +37,7 @@ static int gfs2_aspace_writepage(struct page *page, struct writeback_control *wb { struct buffer_head *bh, *head; int nr_underway = 0; - int write_op = REQ_META | + int write_op = REQ_META | REQ_PRIO | (wbc->sync_mode == WB_SYNC_ALL ? WRITE_SYNC : WRITE); BUG_ON(!PageLocked(page)); @@ -225,7 +225,7 @@ int gfs2_meta_read(struct gfs2_glock *gl, u64 blkno, int flags, } bh->b_end_io = end_buffer_read_sync; get_bh(bh); - submit_bh(READ_SYNC | REQ_META, bh); + submit_bh(READ_SYNC | REQ_META | REQ_PRIO, bh); if (!(flags & DIO_WAIT)) return 0; @@ -435,7 +435,7 @@ struct buffer_head *gfs2_meta_ra(struct gfs2_glock *gl, u64 dblock, u32 extlen) if (buffer_uptodate(first_bh)) goto out; if (!buffer_locked(first_bh)) - ll_rw_block(READ_SYNC | REQ_META, 1, &first_bh); + ll_rw_block(READ_SYNC | REQ_META | REQ_PRIO, 1, &first_bh); dblock++; extlen--; diff --git a/fs/gfs2/ops_fstype.c b/fs/gfs2/ops_fstype.c index 3bc073a..079587e 100644 --- a/fs/gfs2/ops_fstype.c +++ b/fs/gfs2/ops_fstype.c @@ -224,7 +224,7 @@ static int gfs2_read_super(struct gfs2_sbd *sdp, sector_t sector, int silent) bio->bi_end_io = end_bio_io_page; bio->bi_private = page; - submit_bio(READ_SYNC | REQ_META, bio); + submit_bio(READ_SYNC | REQ_META | REQ_PRIO, bio); wait_on_page_locked(page); bio_put(bio); if (!PageUptodate(page)) { diff --git a/fs/gfs2/quota.c b/fs/gfs2/quota.c index 42e8d23..0e8bb13 100644 --- a/fs/gfs2/quota.c +++ b/fs/gfs2/quota.c @@ -709,7 +709,7 @@ get_a_page: set_buffer_uptodate(bh); if (!buffer_uptodate(bh)) { - ll_rw_block(READ_META, 1, &bh); + ll_rw_block(READ | REQ_META | REQ_PRIO, 1, &bh); wait_on_buffer(bh); if (!buffer_uptodate(bh)) goto unlock_out; diff --git a/fs/hfsplus/super.c b/fs/hfsplus/super.c index c106ca2..d24a9b6 100644 --- a/fs/hfsplus/super.c +++ b/fs/hfsplus/super.c @@ -344,6 +344,7 @@ static int hfsplus_fill_super(struct super_block *sb, void *data, int silent) struct inode *root, *inode; struct qstr str; struct nls_table *nls = NULL; + u64 last_fs_block, last_fs_page; int err; err = -EINVAL; @@ -399,9 +400,13 @@ static int hfsplus_fill_super(struct super_block *sb, void *data, int silent) if (!sbi->rsrc_clump_blocks) sbi->rsrc_clump_blocks = 1; - err = generic_check_addressable(sbi->alloc_blksz_shift, - sbi->total_blocks); - if (err) { + err = -EFBIG; + last_fs_block = sbi->total_blocks - 1; + last_fs_page = (last_fs_block << sbi->alloc_blksz_shift) >> + PAGE_CACHE_SHIFT; + + if ((last_fs_block > (sector_t)(~0ULL) >> (sbi->alloc_blksz_shift - 9)) || + (last_fs_page > (pgoff_t)(~0ULL))) { printk(KERN_ERR "hfs: filesystem size too large.\n"); goto out_free_vhdr; } @@ -525,8 +530,8 @@ out_close_cat_tree: out_close_ext_tree: hfs_btree_close(sbi->ext_tree); out_free_vhdr: - kfree(sbi->s_vhdr); - kfree(sbi->s_backup_vhdr); + kfree(sbi->s_vhdr_buf); + kfree(sbi->s_backup_vhdr_buf); out_unload_nls: unload_nls(sbi->nls); unload_nls(nls); diff --git a/fs/hfsplus/wrapper.c b/fs/hfsplus/wrapper.c index 10e515a..7daf4b8 100644 --- a/fs/hfsplus/wrapper.c +++ b/fs/hfsplus/wrapper.c @@ -272,9 +272,9 @@ reread: return 0; out_free_backup_vhdr: - kfree(sbi->s_backup_vhdr); + kfree(sbi->s_backup_vhdr_buf); out_free_vhdr: - kfree(sbi->s_vhdr); + kfree(sbi->s_vhdr_buf); out: return error; } @@ -721,12 +721,6 @@ static int follow_automount(struct path *path, unsigned flags, if (!path->dentry->d_op || !path->dentry->d_op->d_automount) return -EREMOTE; - /* We don't want to mount if someone supplied AT_NO_AUTOMOUNT - * and this is the terminal part of the path. - */ - if ((flags & LOOKUP_NO_AUTOMOUNT) && !(flags & LOOKUP_PARENT)) - return -EISDIR; /* we actually want to stop here */ - /* We don't want to mount if someone's just doing a stat - * unless they're stat'ing a directory and appended a '/' to * the name. @@ -739,7 +733,7 @@ static int follow_automount(struct path *path, unsigned flags, * of the daemon to instantiate them before they can be used. */ if (!(flags & (LOOKUP_PARENT | LOOKUP_DIRECTORY | - LOOKUP_OPEN | LOOKUP_CREATE)) && + LOOKUP_OPEN | LOOKUP_CREATE | LOOKUP_AUTOMOUNT)) && path->dentry->d_inode) return -EISDIR; @@ -2616,6 +2610,7 @@ int vfs_rmdir(struct inode *dir, struct dentry *dentry) if (!dir->i_op->rmdir) return -EPERM; + dget(dentry); mutex_lock(&dentry->d_inode->i_mutex); error = -EBUSY; @@ -2636,6 +2631,7 @@ int vfs_rmdir(struct inode *dir, struct dentry *dentry) out: mutex_unlock(&dentry->d_inode->i_mutex); + dput(dentry); if (!error) d_delete(dentry); return error; @@ -3025,6 +3021,7 @@ static int vfs_rename_dir(struct inode *old_dir, struct dentry *old_dentry, if (error) return error; + dget(new_dentry); if (target) mutex_lock(&target->i_mutex); @@ -3045,6 +3042,7 @@ static int vfs_rename_dir(struct inode *old_dir, struct dentry *old_dentry, out: if (target) mutex_unlock(&target->i_mutex); + dput(new_dentry); if (!error) if (!(old_dir->i_sb->s_type->fs_flags & FS_RENAME_DOES_D_MOVE)) d_move(old_dentry,new_dentry); diff --git a/fs/namespace.c b/fs/namespace.c index 22bfe82..b4febb2 100644 --- a/fs/namespace.c +++ b/fs/namespace.c @@ -1757,7 +1757,7 @@ static int do_loopback(struct path *path, char *old_name, return err; if (!old_name || !*old_name) return -EINVAL; - err = kern_path(old_name, LOOKUP_FOLLOW, &old_path); + err = kern_path(old_name, LOOKUP_FOLLOW|LOOKUP_AUTOMOUNT, &old_path); if (err) return err; diff --git a/fs/nfs/nfs4_fs.h b/fs/nfs/nfs4_fs.h index 1ec1a85..3e93e9a 100644 --- a/fs/nfs/nfs4_fs.h +++ b/fs/nfs/nfs4_fs.h @@ -56,6 +56,9 @@ enum nfs4_session_state { NFS4_SESSION_DRAINING, }; +#define NFS4_RENEW_TIMEOUT 0x01 +#define NFS4_RENEW_DELEGATION_CB 0x02 + struct nfs4_minor_version_ops { u32 minor_version; @@ -225,7 +228,7 @@ struct nfs4_state_recovery_ops { }; struct nfs4_state_maintenance_ops { - int (*sched_state_renewal)(struct nfs_client *, struct rpc_cred *); + int (*sched_state_renewal)(struct nfs_client *, struct rpc_cred *, unsigned); struct rpc_cred * (*get_state_renewal_cred_locked)(struct nfs_client *); int (*renew_lease)(struct nfs_client *, struct rpc_cred *); }; @@ -237,8 +240,6 @@ extern const struct inode_operations nfs4_dir_inode_operations; extern int nfs4_proc_setclientid(struct nfs_client *, u32, unsigned short, struct rpc_cred *, struct nfs4_setclientid_res *); extern int nfs4_proc_setclientid_confirm(struct nfs_client *, struct nfs4_setclientid_res *arg, struct rpc_cred *); extern int nfs4_proc_exchange_id(struct nfs_client *clp, struct rpc_cred *cred); -extern int nfs4_proc_async_renew(struct nfs_client *, struct rpc_cred *); -extern int nfs4_proc_renew(struct nfs_client *, struct rpc_cred *); extern int nfs4_init_clientid(struct nfs_client *, struct rpc_cred *); extern int nfs41_init_clientid(struct nfs_client *, struct rpc_cred *); extern int nfs4_do_close(struct nfs4_state *state, gfp_t gfp_mask, int wait, bool roc); @@ -349,6 +350,7 @@ extern void nfs4_close_sync(struct nfs4_state *, fmode_t); extern void nfs4_state_set_mode_locked(struct nfs4_state *, fmode_t); extern void nfs4_schedule_lease_recovery(struct nfs_client *); extern void nfs4_schedule_state_manager(struct nfs_client *); +extern void nfs4_schedule_path_down_recovery(struct nfs_client *clp); extern void nfs4_schedule_stateid_recovery(const struct nfs_server *, struct nfs4_state *); extern void nfs41_handle_sequence_flag_errors(struct nfs_client *clp, u32 flags); extern void nfs41_handle_recall_slot(struct nfs_client *clp); diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index 8c77039..4700fae 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -3374,9 +3374,13 @@ static void nfs4_renew_done(struct rpc_task *task, void *calldata) if (task->tk_status < 0) { /* Unless we're shutting down, schedule state recovery! */ - if (test_bit(NFS_CS_RENEWD, &clp->cl_res_state) != 0) + if (test_bit(NFS_CS_RENEWD, &clp->cl_res_state) == 0) + return; + if (task->tk_status != NFS4ERR_CB_PATH_DOWN) { nfs4_schedule_lease_recovery(clp); - return; + return; + } + nfs4_schedule_path_down_recovery(clp); } do_renew_lease(clp, timestamp); } @@ -3386,7 +3390,7 @@ static const struct rpc_call_ops nfs4_renew_ops = { .rpc_release = nfs4_renew_release, }; -int nfs4_proc_async_renew(struct nfs_client *clp, struct rpc_cred *cred) +static int nfs4_proc_async_renew(struct nfs_client *clp, struct rpc_cred *cred, unsigned renew_flags) { struct rpc_message msg = { .rpc_proc = &nfs4_procedures[NFSPROC4_CLNT_RENEW], @@ -3395,9 +3399,11 @@ int nfs4_proc_async_renew(struct nfs_client *clp, struct rpc_cred *cred) }; struct nfs4_renewdata *data; + if (renew_flags == 0) + return 0; if (!atomic_inc_not_zero(&clp->cl_count)) return -EIO; - data = kmalloc(sizeof(*data), GFP_KERNEL); + data = kmalloc(sizeof(*data), GFP_NOFS); if (data == NULL) return -ENOMEM; data->client = clp; @@ -3406,7 +3412,7 @@ int nfs4_proc_async_renew(struct nfs_client *clp, struct rpc_cred *cred) &nfs4_renew_ops, data); } -int nfs4_proc_renew(struct nfs_client *clp, struct rpc_cred *cred) +static int nfs4_proc_renew(struct nfs_client *clp, struct rpc_cred *cred) { struct rpc_message msg = { .rpc_proc = &nfs4_procedures[NFSPROC4_CLNT_RENEW], @@ -5504,11 +5510,13 @@ static struct rpc_task *_nfs41_proc_sequence(struct nfs_client *clp, struct rpc_ return rpc_run_task(&task_setup_data); } -static int nfs41_proc_async_sequence(struct nfs_client *clp, struct rpc_cred *cred) +static int nfs41_proc_async_sequence(struct nfs_client *clp, struct rpc_cred *cred, unsigned renew_flags) { struct rpc_task *task; int ret = 0; + if ((renew_flags & NFS4_RENEW_TIMEOUT) == 0) + return 0; task = _nfs41_proc_sequence(clp, cred); if (IS_ERR(task)) ret = PTR_ERR(task); diff --git a/fs/nfs/nfs4renewd.c b/fs/nfs/nfs4renewd.c index df8e7f3..dc484c0 100644 --- a/fs/nfs/nfs4renewd.c +++ b/fs/nfs/nfs4renewd.c @@ -60,6 +60,7 @@ nfs4_renew_state(struct work_struct *work) struct rpc_cred *cred; long lease; unsigned long last, now; + unsigned renew_flags = 0; ops = clp->cl_mvops->state_renewal_ops; dprintk("%s: start\n", __func__); @@ -72,18 +73,23 @@ nfs4_renew_state(struct work_struct *work) last = clp->cl_last_renewal; now = jiffies; /* Are we close to a lease timeout? */ - if (time_after(now, last + lease/3)) { + if (time_after(now, last + lease/3)) + renew_flags |= NFS4_RENEW_TIMEOUT; + if (nfs_delegations_present(clp)) + renew_flags |= NFS4_RENEW_DELEGATION_CB; + + if (renew_flags != 0) { cred = ops->get_state_renewal_cred_locked(clp); spin_unlock(&clp->cl_lock); if (cred == NULL) { - if (!nfs_delegations_present(clp)) { + if (!(renew_flags & NFS4_RENEW_DELEGATION_CB)) { set_bit(NFS4CLNT_LEASE_EXPIRED, &clp->cl_state); goto out; } nfs_expire_all_delegations(clp); } else { /* Queue an asynchronous RENEW. */ - ops->sched_state_renewal(clp, cred); + ops->sched_state_renewal(clp, cred, renew_flags); put_rpccred(cred); goto out_exp; } diff --git a/fs/nfs/nfs4state.c b/fs/nfs/nfs4state.c index 72ab97e..39914be 100644 --- a/fs/nfs/nfs4state.c +++ b/fs/nfs/nfs4state.c @@ -1038,6 +1038,12 @@ void nfs4_schedule_lease_recovery(struct nfs_client *clp) nfs4_schedule_state_manager(clp); } +void nfs4_schedule_path_down_recovery(struct nfs_client *clp) +{ + nfs_handle_cb_pathdown(clp); + nfs4_schedule_state_manager(clp); +} + static int nfs4_state_mark_reclaim_reboot(struct nfs_client *clp, struct nfs4_state *state) { diff --git a/fs/nfs/super.c b/fs/nfs/super.c index b961cea..5b19b6a 100644 --- a/fs/nfs/super.c +++ b/fs/nfs/super.c @@ -2035,9 +2035,6 @@ static inline void nfs_initialise_sb(struct super_block *sb) sb->s_blocksize = nfs_block_bits(server->wsize, &sb->s_blocksize_bits); - if (server->flags & NFS_MOUNT_NOAC) - sb->s_flags |= MS_SYNCHRONOUS; - sb->s_bdi = &server->backing_dev_info; nfs_super_set_maxbytes(sb, server->maxfilesize); @@ -2249,6 +2246,10 @@ static struct dentry *nfs_fs_mount(struct file_system_type *fs_type, if (server->flags & NFS_MOUNT_UNSHARED) compare_super = NULL; + /* -o noac implies -o sync */ + if (server->flags & NFS_MOUNT_NOAC) + sb_mntdata.mntflags |= MS_SYNCHRONOUS; + /* Get a superblock - note that we may end up sharing one that already exists */ s = sget(fs_type, compare_super, nfs_set_super, &sb_mntdata); if (IS_ERR(s)) { @@ -2361,6 +2362,10 @@ nfs_xdev_mount(struct file_system_type *fs_type, int flags, if (server->flags & NFS_MOUNT_UNSHARED) compare_super = NULL; + /* -o noac implies -o sync */ + if (server->flags & NFS_MOUNT_NOAC) + sb_mntdata.mntflags |= MS_SYNCHRONOUS; + /* Get a superblock - note that we may end up sharing one that already exists */ s = sget(&nfs_fs_type, compare_super, nfs_set_super, &sb_mntdata); if (IS_ERR(s)) { @@ -2628,6 +2633,10 @@ nfs4_remote_mount(struct file_system_type *fs_type, int flags, if (server->flags & NFS4_MOUNT_UNSHARED) compare_super = NULL; + /* -o noac implies -o sync */ + if (server->flags & NFS_MOUNT_NOAC) + sb_mntdata.mntflags |= MS_SYNCHRONOUS; + /* Get a superblock - note that we may end up sharing one that already exists */ s = sget(&nfs4_fs_type, compare_super, nfs_set_super, &sb_mntdata); if (IS_ERR(s)) { @@ -2789,7 +2798,7 @@ static struct dentry *nfs_follow_remote_path(struct vfsmount *root_mnt, goto out_put_mnt_ns; ret = vfs_path_lookup(root_mnt->mnt_root, root_mnt, - export_path, LOOKUP_FOLLOW, &path); + export_path, LOOKUP_FOLLOW|LOOKUP_AUTOMOUNT, &path); nfs_referral_loop_unprotect(); put_mnt_ns(ns_private); @@ -2916,6 +2925,10 @@ nfs4_xdev_mount(struct file_system_type *fs_type, int flags, if (server->flags & NFS4_MOUNT_UNSHARED) compare_super = NULL; + /* -o noac implies -o sync */ + if (server->flags & NFS_MOUNT_NOAC) + sb_mntdata.mntflags |= MS_SYNCHRONOUS; + /* Get a superblock - note that we may end up sharing one that already exists */ s = sget(&nfs4_fs_type, compare_super, nfs_set_super, &sb_mntdata); if (IS_ERR(s)) { @@ -3003,6 +3016,10 @@ nfs4_remote_referral_mount(struct file_system_type *fs_type, int flags, if (server->flags & NFS4_MOUNT_UNSHARED) compare_super = NULL; + /* -o noac implies -o sync */ + if (server->flags & NFS_MOUNT_NOAC) + sb_mntdata.mntflags |= MS_SYNCHRONOUS; + /* Get a superblock - note that we may end up sharing one that already exists */ s = sget(&nfs4_fs_type, compare_super, nfs_set_super, &sb_mntdata); if (IS_ERR(s)) { diff --git a/fs/nfs/write.c b/fs/nfs/write.c index b39b37f..c9bd2a6 100644 --- a/fs/nfs/write.c +++ b/fs/nfs/write.c @@ -958,7 +958,7 @@ static int nfs_flush_multi(struct nfs_pageio_descriptor *desc, struct list_head if (!data) goto out_bad; data->pagevec[0] = page; - nfs_write_rpcsetup(req, data, wsize, offset, desc->pg_ioflags); + nfs_write_rpcsetup(req, data, len, offset, desc->pg_ioflags); list_add(&data->list, res); requests++; nbytes -= len; diff --git a/fs/proc/task_mmu.c b/fs/proc/task_mmu.c index 25b6a88..5afaa58 100644 --- a/fs/proc/task_mmu.c +++ b/fs/proc/task_mmu.c @@ -877,30 +877,54 @@ struct numa_maps_private { struct numa_maps md; }; -static void gather_stats(struct page *page, struct numa_maps *md, int pte_dirty) +static void gather_stats(struct page *page, struct numa_maps *md, int pte_dirty, + unsigned long nr_pages) { int count = page_mapcount(page); - md->pages++; + md->pages += nr_pages; if (pte_dirty || PageDirty(page)) - md->dirty++; + md->dirty += nr_pages; if (PageSwapCache(page)) - md->swapcache++; + md->swapcache += nr_pages; if (PageActive(page) || PageUnevictable(page)) - md->active++; + md->active += nr_pages; if (PageWriteback(page)) - md->writeback++; + md->writeback += nr_pages; if (PageAnon(page)) - md->anon++; + md->anon += nr_pages; if (count > md->mapcount_max) md->mapcount_max = count; - md->node[page_to_nid(page)]++; + md->node[page_to_nid(page)] += nr_pages; +} + +static struct page *can_gather_numa_stats(pte_t pte, struct vm_area_struct *vma, + unsigned long addr) +{ + struct page *page; + int nid; + + if (!pte_present(pte)) + return NULL; + + page = vm_normal_page(vma, addr, pte); + if (!page) + return NULL; + + if (PageReserved(page)) + return NULL; + + nid = page_to_nid(page); + if (!node_isset(nid, node_states[N_HIGH_MEMORY])) + return NULL; + + return page; } static int gather_pte_stats(pmd_t *pmd, unsigned long addr, @@ -912,26 +936,32 @@ static int gather_pte_stats(pmd_t *pmd, unsigned long addr, pte_t *pte; md = walk->private; - orig_pte = pte = pte_offset_map_lock(walk->mm, pmd, addr, &ptl); - do { - struct page *page; - int nid; + spin_lock(&walk->mm->page_table_lock); + if (pmd_trans_huge(*pmd)) { + if (pmd_trans_splitting(*pmd)) { + spin_unlock(&walk->mm->page_table_lock); + wait_split_huge_page(md->vma->anon_vma, pmd); + } else { + pte_t huge_pte = *(pte_t *)pmd; + struct page *page; - if (!pte_present(*pte)) - continue; + page = can_gather_numa_stats(huge_pte, md->vma, addr); + if (page) + gather_stats(page, md, pte_dirty(huge_pte), + HPAGE_PMD_SIZE/PAGE_SIZE); + spin_unlock(&walk->mm->page_table_lock); + return 0; + } + } else { + spin_unlock(&walk->mm->page_table_lock); + } - page = vm_normal_page(md->vma, addr, *pte); + orig_pte = pte = pte_offset_map_lock(walk->mm, pmd, addr, &ptl); + do { + struct page *page = can_gather_numa_stats(*pte, md->vma, addr); if (!page) continue; - - if (PageReserved(page)) - continue; - - nid = page_to_nid(page); - if (!node_isset(nid, node_states[N_HIGH_MEMORY])) - continue; - - gather_stats(page, md, pte_dirty(*pte)); + gather_stats(page, md, pte_dirty(*pte), 1); } while (pte++, addr += PAGE_SIZE, addr != end); pte_unmap_unlock(orig_pte, ptl); @@ -952,7 +982,7 @@ static int gather_hugetbl_stats(pte_t *pte, unsigned long hmask, return 0; md = walk->private; - gather_stats(page, md, pte_dirty(*pte)); + gather_stats(page, md, pte_dirty(*pte), 1); return 0; } diff --git a/fs/quota/quota.c b/fs/quota/quota.c index b34bdb2..10b6be3 100644 --- a/fs/quota/quota.c +++ b/fs/quota/quota.c @@ -355,7 +355,7 @@ SYSCALL_DEFINE4(quotactl, unsigned int, cmd, const char __user *, special, * resolution (think about autofs) and thus deadlocks could arise. */ if (cmds == Q_QUOTAON) { - ret = user_path_at(AT_FDCWD, addr, LOOKUP_FOLLOW, &path); + ret = user_path_at(AT_FDCWD, addr, LOOKUP_FOLLOW|LOOKUP_AUTOMOUNT, &path); if (ret) pathp = ERR_PTR(ret); else @@ -81,8 +81,6 @@ int vfs_fstatat(int dfd, const char __user *filename, struct kstat *stat, if (!(flag & AT_SYMLINK_NOFOLLOW)) lookup_flags |= LOOKUP_FOLLOW; - if (flag & AT_NO_AUTOMOUNT) - lookup_flags |= LOOKUP_NO_AUTOMOUNT; if (flag & AT_EMPTY_PATH) lookup_flags |= LOOKUP_EMPTY; diff --git a/fs/xfs/xfs_aops.c b/fs/xfs/xfs_aops.c index 63e971e..8c37dde 100644 --- a/fs/xfs/xfs_aops.c +++ b/fs/xfs/xfs_aops.c @@ -1300,6 +1300,7 @@ xfs_end_io_direct_write( bool is_async) { struct xfs_ioend *ioend = iocb->private; + struct inode *inode = ioend->io_inode; /* * blockdev_direct_IO can return an error even after the I/O @@ -1331,7 +1332,7 @@ xfs_end_io_direct_write( } /* XXX: probably should move into the real I/O completion handler */ - inode_dio_done(ioend->io_inode); + inode_dio_done(inode); } STATIC ssize_t diff --git a/include/linux/amba/pl08x.h b/include/linux/amba/pl08x.h index e6e28f3..a22662c 100644 --- a/include/linux/amba/pl08x.h +++ b/include/linux/amba/pl08x.h @@ -47,6 +47,9 @@ enum { * @muxval: a number usually used to poke into some mux regiser to * mux in the signal to this channel * @cctl_opt: default options for the channel control register + * @device_fc: Flow Controller Settings for ccfg register. Only valid for slave + * channels. Fill with 'true' if peripheral should be flow controller. Direction + * will be selected at Runtime. * @addr: source/target address in physical memory for this DMA channel, * can be the address of a FIFO register for burst requests for example. * This can be left undefined if the PrimeCell API is used for configuring @@ -65,6 +68,7 @@ struct pl08x_channel_data { int max_signal; u32 muxval; u32 cctl; + bool device_fc; dma_addr_t addr; bool circular_buffer; bool single; @@ -77,13 +81,11 @@ struct pl08x_channel_data { * @addr: current address * @maxwidth: the maximum width of a transfer on this bus * @buswidth: the width of this bus in bytes: 1, 2 or 4 - * @fill_bytes: bytes required to fill to the next bus memory boundary */ struct pl08x_bus_data { dma_addr_t addr; u8 maxwidth; u8 buswidth; - size_t fill_bytes; }; /** @@ -105,8 +107,16 @@ struct pl08x_phy_chan { /** * struct pl08x_txd - wrapper for struct dma_async_tx_descriptor + * @tx: async tx descriptor + * @node: node for txd list for channels + * @src_addr: src address of txd + * @dst_addr: dst address of txd + * @len: transfer len in bytes + * @direction: direction of transfer * @llis_bus: DMA memory address (physical) start for the LLIs * @llis_va: virtual memory address start for the LLIs + * @cctl: control reg values for current txd + * @ccfg: config reg values for current txd */ struct pl08x_txd { struct dma_async_tx_descriptor tx; diff --git a/include/linux/amba/pl330.h b/include/linux/amba/pl330.h index cbee7de..d12f077 100644 --- a/include/linux/amba/pl330.h +++ b/include/linux/amba/pl330.h @@ -19,12 +19,8 @@ struct dma_pl330_peri { * Peri_Req i/f of the DMAC that is * peripheral could be reached from. */ - u8 peri_id; /* {0, 31} */ + u8 peri_id; /* specific dma id */ enum pl330_reqtype rqtype; - - /* For M->D and D->M Channels */ - int burst_sz; /* in power of 2 */ - dma_addr_t fifo_addr; }; struct dma_pl330_platdata { diff --git a/include/linux/basic_mmio_gpio.h b/include/linux/basic_mmio_gpio.h index 98999cf1..feb91219 100644 --- a/include/linux/basic_mmio_gpio.h +++ b/include/linux/basic_mmio_gpio.h @@ -63,15 +63,10 @@ static inline struct bgpio_chip *to_bgpio_chip(struct gpio_chip *gc) return container_of(gc, struct bgpio_chip, gc); } -int __devexit bgpio_remove(struct bgpio_chip *bgc); -int __devinit bgpio_init(struct bgpio_chip *bgc, - struct device *dev, - unsigned long sz, - void __iomem *dat, - void __iomem *set, - void __iomem *clr, - void __iomem *dirout, - void __iomem *dirin, - bool big_endian); +int bgpio_remove(struct bgpio_chip *bgc); +int bgpio_init(struct bgpio_chip *bgc, struct device *dev, + unsigned long sz, void __iomem *dat, void __iomem *set, + void __iomem *clr, void __iomem *dirout, void __iomem *dirin, + bool big_endian); #endif /* __BASIC_MMIO_GPIO_H */ diff --git a/include/linux/blk_types.h b/include/linux/blk_types.h index 32f0076..71fc53b 100644 --- a/include/linux/blk_types.h +++ b/include/linux/blk_types.h @@ -124,6 +124,7 @@ enum rq_flag_bits { __REQ_SYNC, /* request is sync (sync write or read) */ __REQ_META, /* metadata io request */ + __REQ_PRIO, /* boost priority in cfq */ __REQ_DISCARD, /* request to discard sectors */ __REQ_SECURE, /* secure discard (used with __REQ_DISCARD) */ @@ -161,14 +162,15 @@ enum rq_flag_bits { #define REQ_FAILFAST_DRIVER (1 << __REQ_FAILFAST_DRIVER) #define REQ_SYNC (1 << __REQ_SYNC) #define REQ_META (1 << __REQ_META) +#define REQ_PRIO (1 << __REQ_PRIO) #define REQ_DISCARD (1 << __REQ_DISCARD) #define REQ_NOIDLE (1 << __REQ_NOIDLE) #define REQ_FAILFAST_MASK \ (REQ_FAILFAST_DEV | REQ_FAILFAST_TRANSPORT | REQ_FAILFAST_DRIVER) #define REQ_COMMON_MASK \ - (REQ_WRITE | REQ_FAILFAST_MASK | REQ_SYNC | REQ_META | REQ_DISCARD | \ - REQ_NOIDLE | REQ_FLUSH | REQ_FUA | REQ_SECURE) + (REQ_WRITE | REQ_FAILFAST_MASK | REQ_SYNC | REQ_META | REQ_PRIO | \ + REQ_DISCARD | REQ_NOIDLE | REQ_FLUSH | REQ_FUA | REQ_SECURE) #define REQ_CLONE_MASK REQ_COMMON_MASK #define REQ_RAHEAD (1 << __REQ_RAHEAD) diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h index 84b15d5..7fbaa91 100644 --- a/include/linux/blkdev.h +++ b/include/linux/blkdev.h @@ -873,7 +873,6 @@ struct blk_plug { struct list_head list; struct list_head cb_list; unsigned int should_sort; - unsigned int count; }; #define BLK_MAX_REQUEST_COUNT 16 diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h index 8fbf40e..ace51af 100644 --- a/include/linux/dmaengine.h +++ b/include/linux/dmaengine.h @@ -24,8 +24,7 @@ #include <linux/device.h> #include <linux/uio.h> #include <linux/dma-direction.h> - -struct scatterlist; +#include <linux/scatterlist.h> /** * typedef dma_cookie_t - an opaque DMA cookie @@ -519,6 +518,16 @@ static inline int dmaengine_slave_config(struct dma_chan *chan, (unsigned long)config); } +static inline struct dma_async_tx_descriptor *dmaengine_prep_slave_single( + struct dma_chan *chan, void *buf, size_t len, + enum dma_data_direction dir, unsigned long flags) +{ + struct scatterlist sg; + sg_init_one(&sg, buf, len); + + return chan->device->device_prep_slave_sg(chan, &sg, 1, dir, flags); +} + static inline int dmaengine_terminate_all(struct dma_chan *chan) { return dmaengine_device_control(chan, DMA_TERMINATE_ALL, 0); diff --git a/include/linux/fs.h b/include/linux/fs.h index c2bd68f..277f497 100644 --- a/include/linux/fs.h +++ b/include/linux/fs.h @@ -162,10 +162,8 @@ struct inodes_stat_t { #define READA RWA_MASK #define READ_SYNC (READ | REQ_SYNC) -#define READ_META (READ | REQ_META) #define WRITE_SYNC (WRITE | REQ_SYNC | REQ_NOIDLE) #define WRITE_ODIRECT (WRITE | REQ_SYNC) -#define WRITE_META (WRITE | REQ_META) #define WRITE_FLUSH (WRITE | REQ_SYNC | REQ_NOIDLE | REQ_FLUSH) #define WRITE_FUA (WRITE | REQ_SYNC | REQ_NOIDLE | REQ_FUA) #define WRITE_FLUSH_FUA (WRITE | REQ_SYNC | REQ_NOIDLE | REQ_FLUSH | REQ_FUA) diff --git a/include/linux/kvm.h b/include/linux/kvm.h index 2c366b5..aace6b8 100644 --- a/include/linux/kvm.h +++ b/include/linux/kvm.h @@ -553,6 +553,7 @@ struct kvm_ppc_pvinfo { #define KVM_CAP_SPAPR_TCE 63 #define KVM_CAP_PPC_SMT 64 #define KVM_CAP_PPC_RMA 65 +#define KVM_CAP_S390_GMAP 71 #ifdef KVM_CAP_IRQ_ROUTING diff --git a/include/linux/memcontrol.h b/include/linux/memcontrol.h index 3b535db..343bd76 100644 --- a/include/linux/memcontrol.h +++ b/include/linux/memcontrol.h @@ -39,16 +39,6 @@ extern unsigned long mem_cgroup_isolate_pages(unsigned long nr_to_scan, struct mem_cgroup *mem_cont, int active, int file); -struct memcg_scanrecord { - struct mem_cgroup *mem; /* scanend memory cgroup */ - struct mem_cgroup *root; /* scan target hierarchy root */ - int context; /* scanning context (see memcontrol.c) */ - unsigned long nr_scanned[2]; /* the number of scanned pages */ - unsigned long nr_rotated[2]; /* the number of rotated pages */ - unsigned long nr_freed[2]; /* the number of freed pages */ - unsigned long elapsed; /* nsec of time elapsed while scanning */ -}; - #ifdef CONFIG_CGROUP_MEM_RES_CTLR /* * All "charge" functions with gfp_mask should use GFP_KERNEL or @@ -127,15 +117,6 @@ mem_cgroup_get_reclaim_stat_from_page(struct page *page); extern void mem_cgroup_print_oom_info(struct mem_cgroup *memcg, struct task_struct *p); -extern unsigned long try_to_free_mem_cgroup_pages(struct mem_cgroup *mem, - gfp_t gfp_mask, bool noswap, - struct memcg_scanrecord *rec); -extern unsigned long mem_cgroup_shrink_node_zone(struct mem_cgroup *mem, - gfp_t gfp_mask, bool noswap, - struct zone *zone, - struct memcg_scanrecord *rec, - unsigned long *nr_scanned); - #ifdef CONFIG_CGROUP_MEM_RES_CTLR_SWAP extern int do_swap_account; #endif diff --git a/include/linux/mfd/wm8994/pdata.h b/include/linux/mfd/wm8994/pdata.h index d12f8d6..97cf4f2 100644 --- a/include/linux/mfd/wm8994/pdata.h +++ b/include/linux/mfd/wm8994/pdata.h @@ -26,7 +26,7 @@ struct wm8994_ldo_pdata { struct regulator_init_data *init_data; }; -#define WM8994_CONFIGURE_GPIO 0x8000 +#define WM8994_CONFIGURE_GPIO 0x10000 #define WM8994_DRC_REGS 5 #define WM8994_EQ_REGS 20 diff --git a/include/linux/namei.h b/include/linux/namei.h index 76fe2c6..409328d 100644 --- a/include/linux/namei.h +++ b/include/linux/namei.h @@ -48,11 +48,12 @@ enum {LAST_NORM, LAST_ROOT, LAST_DOT, LAST_DOTDOT, LAST_BIND}; */ #define LOOKUP_FOLLOW 0x0001 #define LOOKUP_DIRECTORY 0x0002 +#define LOOKUP_AUTOMOUNT 0x0004 #define LOOKUP_PARENT 0x0010 #define LOOKUP_REVAL 0x0020 #define LOOKUP_RCU 0x0040 -#define LOOKUP_NO_AUTOMOUNT 0x0080 + /* * Intent data */ diff --git a/include/linux/skbuff.h b/include/linux/skbuff.h index 7b996ed..8bd383c 100644 --- a/include/linux/skbuff.h +++ b/include/linux/skbuff.h @@ -524,6 +524,7 @@ static inline struct sk_buff *alloc_skb_fclone(unsigned int size, extern bool skb_recycle_check(struct sk_buff *skb, int skb_size); extern struct sk_buff *skb_morph(struct sk_buff *dst, struct sk_buff *src); +extern int skb_copy_ubufs(struct sk_buff *skb, gfp_t gfp_mask); extern struct sk_buff *skb_clone(struct sk_buff *skb, gfp_t priority); extern struct sk_buff *skb_copy(const struct sk_buff *skb, diff --git a/include/linux/snmp.h b/include/linux/snmp.h index 12b2b18..e16557a 100644 --- a/include/linux/snmp.h +++ b/include/linux/snmp.h @@ -231,6 +231,8 @@ enum LINUX_MIB_TCPDEFERACCEPTDROP, LINUX_MIB_IPRPFILTER, /* IP Reverse Path Filter (rp_filter) */ LINUX_MIB_TCPTIMEWAITOVERFLOW, /* TCPTimeWaitOverflow */ + LINUX_MIB_TCPREQQFULLDOCOOKIES, /* TCPReqQFullDoCookies */ + LINUX_MIB_TCPREQQFULLDROP, /* TCPReqQFullDrop */ __LINUX_MIB_MAX }; diff --git a/include/linux/swap.h b/include/linux/swap.h index 14d6249..c71f84b 100644 --- a/include/linux/swap.h +++ b/include/linux/swap.h @@ -252,6 +252,12 @@ static inline void lru_cache_add_file(struct page *page) extern unsigned long try_to_free_pages(struct zonelist *zonelist, int order, gfp_t gfp_mask, nodemask_t *mask); extern int __isolate_lru_page(struct page *page, int mode, int file); +extern unsigned long try_to_free_mem_cgroup_pages(struct mem_cgroup *mem, + gfp_t gfp_mask, bool noswap); +extern unsigned long mem_cgroup_shrink_node_zone(struct mem_cgroup *mem, + gfp_t gfp_mask, bool noswap, + struct zone *zone, + unsigned long *nr_scanned); extern unsigned long shrink_all_memory(unsigned long nr_pages); extern int vm_swappiness; extern int remove_mapping(struct address_space *mapping, struct page *page); diff --git a/include/net/flow.h b/include/net/flow.h index 78113da..a094477 100644 --- a/include/net/flow.h +++ b/include/net/flow.h @@ -7,6 +7,7 @@ #ifndef _NET_FLOW_H #define _NET_FLOW_H +#include <linux/socket.h> #include <linux/in6.h> #include <linux/atomic.h> @@ -68,7 +69,7 @@ struct flowi4 { #define fl4_ipsec_spi uli.spi #define fl4_mh_type uli.mht.type #define fl4_gre_key uli.gre_key -}; +} __attribute__((__aligned__(BITS_PER_LONG/8))); static inline void flowi4_init_output(struct flowi4 *fl4, int oif, __u32 mark, __u8 tos, __u8 scope, @@ -112,7 +113,7 @@ struct flowi6 { #define fl6_ipsec_spi uli.spi #define fl6_mh_type uli.mht.type #define fl6_gre_key uli.gre_key -}; +} __attribute__((__aligned__(BITS_PER_LONG/8))); struct flowidn { struct flowi_common __fl_common; @@ -127,7 +128,7 @@ struct flowidn { union flowi_uli uli; #define fld_sport uli.ports.sport #define fld_dport uli.ports.dport -}; +} __attribute__((__aligned__(BITS_PER_LONG/8))); struct flowi { union { @@ -161,6 +162,24 @@ static inline struct flowi *flowidn_to_flowi(struct flowidn *fldn) return container_of(fldn, struct flowi, u.dn); } +typedef unsigned long flow_compare_t; + +static inline size_t flow_key_size(u16 family) +{ + switch (family) { + case AF_INET: + BUILD_BUG_ON(sizeof(struct flowi4) % sizeof(flow_compare_t)); + return sizeof(struct flowi4) / sizeof(flow_compare_t); + case AF_INET6: + BUILD_BUG_ON(sizeof(struct flowi6) % sizeof(flow_compare_t)); + return sizeof(struct flowi6) / sizeof(flow_compare_t); + case AF_DECnet: + BUILD_BUG_ON(sizeof(struct flowidn) % sizeof(flow_compare_t)); + return sizeof(struct flowidn) / sizeof(flow_compare_t); + } + return 0; +} + #define FLOW_DIR_IN 0 #define FLOW_DIR_OUT 1 #define FLOW_DIR_FWD 2 diff --git a/include/net/request_sock.h b/include/net/request_sock.h index 99e6e19..4c0766e 100644 --- a/include/net/request_sock.h +++ b/include/net/request_sock.h @@ -96,7 +96,8 @@ extern int sysctl_max_syn_backlog; */ struct listen_sock { u8 max_qlen_log; - /* 3 bytes hole, try to use */ + u8 synflood_warned; + /* 2 bytes hole, try to use */ int qlen; int qlen_young; int clock_hand; diff --git a/include/net/sctp/command.h b/include/net/sctp/command.h index 6506458..712b3be 100644 --- a/include/net/sctp/command.h +++ b/include/net/sctp/command.h @@ -109,6 +109,7 @@ typedef enum { SCTP_CMD_SEND_MSG, /* Send the whole use message */ SCTP_CMD_SEND_NEXT_ASCONF, /* Send the next ASCONF after ACK */ SCTP_CMD_PURGE_ASCONF_QUEUE, /* Purge all asconf queues.*/ + SCTP_CMD_SET_ASOC, /* Restore association context */ SCTP_CMD_LAST } sctp_verb_t; diff --git a/include/net/tcp.h b/include/net/tcp.h index 149a415..acc620a 100644 --- a/include/net/tcp.h +++ b/include/net/tcp.h @@ -431,17 +431,34 @@ extern int tcp_disconnect(struct sock *sk, int flags); extern __u32 syncookie_secret[2][16-4+SHA_DIGEST_WORDS]; extern struct sock *cookie_v4_check(struct sock *sk, struct sk_buff *skb, struct ip_options *opt); +#ifdef CONFIG_SYN_COOKIES extern __u32 cookie_v4_init_sequence(struct sock *sk, struct sk_buff *skb, __u16 *mss); +#else +static inline __u32 cookie_v4_init_sequence(struct sock *sk, + struct sk_buff *skb, + __u16 *mss) +{ + return 0; +} +#endif extern __u32 cookie_init_timestamp(struct request_sock *req); extern bool cookie_check_timestamp(struct tcp_options_received *opt, bool *); /* From net/ipv6/syncookies.c */ extern struct sock *cookie_v6_check(struct sock *sk, struct sk_buff *skb); +#ifdef CONFIG_SYN_COOKIES extern __u32 cookie_v6_init_sequence(struct sock *sk, struct sk_buff *skb, __u16 *mss); - +#else +static inline __u32 cookie_v6_init_sequence(struct sock *sk, + struct sk_buff *skb, + __u16 *mss) +{ + return 0; +} +#endif /* tcp_output.c */ extern void __tcp_push_pending_frames(struct sock *sk, unsigned int cur_mss, @@ -460,6 +477,9 @@ extern int tcp_write_wakeup(struct sock *); extern void tcp_send_fin(struct sock *sk); extern void tcp_send_active_reset(struct sock *sk, gfp_t priority); extern int tcp_send_synack(struct sock *); +extern int tcp_syn_flood_action(struct sock *sk, + const struct sk_buff *skb, + const char *proto); extern void tcp_push_one(struct sock *, unsigned int mss_now); extern void tcp_send_ack(struct sock *sk); extern void tcp_send_delayed_ack(struct sock *sk); diff --git a/include/net/transp_v6.h b/include/net/transp_v6.h index 5271a74..498433d 100644 --- a/include/net/transp_v6.h +++ b/include/net/transp_v6.h @@ -39,6 +39,7 @@ extern int datagram_recv_ctl(struct sock *sk, struct sk_buff *skb); extern int datagram_send_ctl(struct net *net, + struct sock *sk, struct msghdr *msg, struct flowi6 *fl6, struct ipv6_txoptions *opt, diff --git a/init/main.c b/init/main.c index 9c51ee7..2a9b88a 100644 --- a/init/main.c +++ b/init/main.c @@ -209,8 +209,19 @@ early_param("quiet", quiet_kernel); static int __init loglevel(char *str) { - get_option(&str, &console_loglevel); - return 0; + int newlevel; + + /* + * Only update loglevel value when a correct setting was passed, + * to prevent blind crashes (when loglevel being set to 0) that + * are quite hard to debug + */ + if (get_option(&str, &newlevel)) { + console_loglevel = newlevel; + return 0; + } + + return -EINVAL; } early_param("loglevel", loglevel); diff --git a/kernel/irq/chip.c b/kernel/irq/chip.c index d5a3009..dc5114b 100644 --- a/kernel/irq/chip.c +++ b/kernel/irq/chip.c @@ -178,7 +178,7 @@ void irq_shutdown(struct irq_desc *desc) desc->depth = 1; if (desc->irq_data.chip->irq_shutdown) desc->irq_data.chip->irq_shutdown(&desc->irq_data); - if (desc->irq_data.chip->irq_disable) + else if (desc->irq_data.chip->irq_disable) desc->irq_data.chip->irq_disable(&desc->irq_data); else desc->irq_data.chip->irq_mask(&desc->irq_data); diff --git a/kernel/ptrace.c b/kernel/ptrace.c index 9de3ecf..a70d2a5 100644 --- a/kernel/ptrace.c +++ b/kernel/ptrace.c @@ -744,20 +744,17 @@ int ptrace_request(struct task_struct *child, long request, break; si = child->last_siginfo; - if (unlikely(!si || si->si_code >> 8 != PTRACE_EVENT_STOP)) - break; - - child->jobctl |= JOBCTL_LISTENING; - - /* - * If NOTIFY is set, it means event happened between start - * of this trap and now. Trigger re-trap immediately. - */ - if (child->jobctl & JOBCTL_TRAP_NOTIFY) - signal_wake_up(child, true); - + if (likely(si && (si->si_code >> 8) == PTRACE_EVENT_STOP)) { + child->jobctl |= JOBCTL_LISTENING; + /* + * If NOTIFY is set, it means event happened between + * start of this trap and now. Trigger re-trap. + */ + if (child->jobctl & JOBCTL_TRAP_NOTIFY) + signal_wake_up(child, true); + ret = 0; + } unlock_task_sighand(child, &flags); - ret = 0; break; case PTRACE_DETACH: /* detach a process that was attached. */ diff --git a/kernel/taskstats.c b/kernel/taskstats.c index e19ce14..e660464 100644 --- a/kernel/taskstats.c +++ b/kernel/taskstats.c @@ -655,6 +655,7 @@ static struct genl_ops taskstats_ops = { .cmd = TASKSTATS_CMD_GET, .doit = taskstats_user_cmd, .policy = taskstats_cmd_get_policy, + .flags = GENL_ADMIN_PERM, }; static struct genl_ops cgroupstats_ops = { diff --git a/kernel/tsacct.c b/kernel/tsacct.c index 24dc60d..5bbfac8 100644 --- a/kernel/tsacct.c +++ b/kernel/tsacct.c @@ -78,6 +78,7 @@ void bacct_add_tsk(struct taskstats *stats, struct task_struct *tsk) #define KB 1024 #define MB (1024*KB) +#define KB_MASK (~(KB-1)) /* * fill in extended accounting fields */ @@ -95,14 +96,14 @@ void xacct_add_tsk(struct taskstats *stats, struct task_struct *p) stats->hiwater_vm = get_mm_hiwater_vm(mm) * PAGE_SIZE / KB; mmput(mm); } - stats->read_char = p->ioac.rchar; - stats->write_char = p->ioac.wchar; - stats->read_syscalls = p->ioac.syscr; - stats->write_syscalls = p->ioac.syscw; + stats->read_char = p->ioac.rchar & KB_MASK; + stats->write_char = p->ioac.wchar & KB_MASK; + stats->read_syscalls = p->ioac.syscr & KB_MASK; + stats->write_syscalls = p->ioac.syscw & KB_MASK; #ifdef CONFIG_TASK_IO_ACCOUNTING - stats->read_bytes = p->ioac.read_bytes; - stats->write_bytes = p->ioac.write_bytes; - stats->cancelled_write_bytes = p->ioac.cancelled_write_bytes; + stats->read_bytes = p->ioac.read_bytes & KB_MASK; + stats->write_bytes = p->ioac.write_bytes & KB_MASK; + stats->cancelled_write_bytes = p->ioac.cancelled_write_bytes & KB_MASK; #else stats->read_bytes = 0; stats->write_bytes = 0; diff --git a/kernel/workqueue.c b/kernel/workqueue.c index 25fb1b0..1783aab 100644 --- a/kernel/workqueue.c +++ b/kernel/workqueue.c @@ -2412,8 +2412,13 @@ reflush: for_each_cwq_cpu(cpu, wq) { struct cpu_workqueue_struct *cwq = get_cwq(cpu, wq); + bool drained; - if (!cwq->nr_active && list_empty(&cwq->delayed_works)) + spin_lock_irq(&cwq->gcwq->lock); + drained = !cwq->nr_active && list_empty(&cwq->delayed_works); + spin_unlock_irq(&cwq->gcwq->lock); + + if (drained) continue; if (++flush_cnt == 10 || @@ -8,6 +8,7 @@ #include <linux/kernel.h> #include <linux/module.h> #include <linux/bitops.h> +#include <linux/cryptohash.h> #include <asm/unaligned.h> /* diff --git a/lib/xz/xz_dec_bcj.c b/lib/xz/xz_dec_bcj.c index e51e255..a768e6d 100644 --- a/lib/xz/xz_dec_bcj.c +++ b/lib/xz/xz_dec_bcj.c @@ -441,8 +441,12 @@ XZ_EXTERN enum xz_ret xz_dec_bcj_run(struct xz_dec_bcj *s, * next filter in the chain. Apply the BCJ filter on the new data * in the output buffer. If everything cannot be filtered, copy it * to temp and rewind the output buffer position accordingly. + * + * This needs to be always run when temp.size == 0 to handle a special + * case where the output buffer is full and the next filter has no + * more output coming but hasn't returned XZ_STREAM_END yet. */ - if (s->temp.size < b->out_size - b->out_pos) { + if (s->temp.size < b->out_size - b->out_pos || s->temp.size == 0) { out_start = b->out_pos; memcpy(b->out + b->out_pos, s->temp.buf, s->temp.size); b->out_pos += s->temp.size; @@ -465,16 +469,25 @@ XZ_EXTERN enum xz_ret xz_dec_bcj_run(struct xz_dec_bcj *s, s->temp.size = b->out_pos - out_start; b->out_pos -= s->temp.size; memcpy(s->temp.buf, b->out + b->out_pos, s->temp.size); + + /* + * If there wasn't enough input to the next filter to fill + * the output buffer with unfiltered data, there's no point + * to try decoding more data to temp. + */ + if (b->out_pos + s->temp.size < b->out_size) + return XZ_OK; } /* - * If we have unfiltered data in temp, try to fill by decoding more - * data from the next filter. Apply the BCJ filter on temp. Then we - * hopefully can fill the actual output buffer by copying filtered - * data from temp. A mix of filtered and unfiltered data may be left - * in temp; it will be taken care on the next call to this function. + * We have unfiltered data in temp. If the output buffer isn't full + * yet, try to fill the temp buffer by decoding more data from the + * next filter. Apply the BCJ filter on temp. Then we hopefully can + * fill the actual output buffer by copying filtered data from temp. + * A mix of filtered and unfiltered data may be left in temp; it will + * be taken care on the next call to this function. */ - if (s->temp.size > 0) { + if (b->out_pos < b->out_size) { /* Make b->out{,_pos,_size} temporarily point to s->temp. */ s->out = b->out; s->out_pos = b->out_pos; diff --git a/mm/backing-dev.c b/mm/backing-dev.c index d6edf8d..a87da52 100644 --- a/mm/backing-dev.c +++ b/mm/backing-dev.c @@ -359,6 +359,17 @@ static unsigned long bdi_longest_inactive(void) return max(5UL * 60 * HZ, interval); } +/* + * Clear pending bit and wakeup anybody waiting for flusher thread creation or + * shutdown + */ +static void bdi_clear_pending(struct backing_dev_info *bdi) +{ + clear_bit(BDI_pending, &bdi->state); + smp_mb__after_clear_bit(); + wake_up_bit(&bdi->state, BDI_pending); +} + static int bdi_forker_thread(void *ptr) { struct bdi_writeback *me = ptr; @@ -390,6 +401,13 @@ static int bdi_forker_thread(void *ptr) } spin_lock_bh(&bdi_lock); + /* + * In the following loop we are going to check whether we have + * some work to do without any synchronization with tasks + * waking us up to do work for them. So we have to set task + * state already here so that we don't miss wakeups coming + * after we verify some condition. + */ set_current_state(TASK_INTERRUPTIBLE); list_for_each_entry(bdi, &bdi_list, bdi_list) { @@ -469,11 +487,13 @@ static int bdi_forker_thread(void *ptr) spin_unlock_bh(&bdi->wb_lock); wake_up_process(task); } + bdi_clear_pending(bdi); break; case KILL_THREAD: __set_current_state(TASK_RUNNING); kthread_stop(task); + bdi_clear_pending(bdi); break; case NO_ACTION: @@ -489,16 +509,8 @@ static int bdi_forker_thread(void *ptr) else schedule_timeout(msecs_to_jiffies(dirty_writeback_interval * 10)); try_to_freeze(); - /* Back to the main loop */ - continue; + break; } - - /* - * Clear pending bit and wakeup anybody waiting to tear us down. - */ - clear_bit(BDI_pending, &bdi->state); - smp_mb__after_clear_bit(); - wake_up_bit(&bdi->state, BDI_pending); } return 0; diff --git a/mm/filemap.c b/mm/filemap.c index 645a080..7771871 100644 --- a/mm/filemap.c +++ b/mm/filemap.c @@ -827,13 +827,14 @@ unsigned find_get_pages(struct address_space *mapping, pgoff_t start, { unsigned int i; unsigned int ret; - unsigned int nr_found; + unsigned int nr_found, nr_skip; rcu_read_lock(); restart: nr_found = radix_tree_gang_lookup_slot(&mapping->page_tree, (void ***)pages, NULL, start, nr_pages); ret = 0; + nr_skip = 0; for (i = 0; i < nr_found; i++) { struct page *page; repeat: @@ -856,6 +857,7 @@ repeat: * here as an exceptional entry: so skip over it - * we only reach this from invalidate_mapping_pages(). */ + nr_skip++; continue; } @@ -876,7 +878,7 @@ repeat: * If all entries were removed before we could secure them, * try again, because callers stop trying once 0 is returned. */ - if (unlikely(!ret && nr_found)) + if (unlikely(!ret && nr_found > nr_skip)) goto restart; rcu_read_unlock(); return ret; diff --git a/mm/memcontrol.c b/mm/memcontrol.c index ebd1e86..3508777 100644 --- a/mm/memcontrol.c +++ b/mm/memcontrol.c @@ -204,50 +204,6 @@ struct mem_cgroup_eventfd_list { static void mem_cgroup_threshold(struct mem_cgroup *mem); static void mem_cgroup_oom_notify(struct mem_cgroup *mem); -enum { - SCAN_BY_LIMIT, - SCAN_BY_SYSTEM, - NR_SCAN_CONTEXT, - SCAN_BY_SHRINK, /* not recorded now */ -}; - -enum { - SCAN, - SCAN_ANON, - SCAN_FILE, - ROTATE, - ROTATE_ANON, - ROTATE_FILE, - FREED, - FREED_ANON, - FREED_FILE, - ELAPSED, - NR_SCANSTATS, -}; - -struct scanstat { - spinlock_t lock; - unsigned long stats[NR_SCAN_CONTEXT][NR_SCANSTATS]; - unsigned long rootstats[NR_SCAN_CONTEXT][NR_SCANSTATS]; -}; - -const char *scanstat_string[NR_SCANSTATS] = { - "scanned_pages", - "scanned_anon_pages", - "scanned_file_pages", - "rotated_pages", - "rotated_anon_pages", - "rotated_file_pages", - "freed_pages", - "freed_anon_pages", - "freed_file_pages", - "elapsed_ns", -}; -#define SCANSTAT_WORD_LIMIT "_by_limit" -#define SCANSTAT_WORD_SYSTEM "_by_system" -#define SCANSTAT_WORD_HIERARCHY "_under_hierarchy" - - /* * The memory controller data structure. The memory controller controls both * page cache and RSS per cgroup. We would eventually like to provide @@ -313,8 +269,7 @@ struct mem_cgroup { /* For oom notifier event fd */ struct list_head oom_notify; - /* For recording LRU-scan statistics */ - struct scanstat scanstat; + /* * Should we move charges of a task when a task is moved into this * mem_cgroup ? And what type of charges should we move ? @@ -1678,44 +1633,6 @@ bool mem_cgroup_reclaimable(struct mem_cgroup *mem, bool noswap) } #endif -static void __mem_cgroup_record_scanstat(unsigned long *stats, - struct memcg_scanrecord *rec) -{ - - stats[SCAN] += rec->nr_scanned[0] + rec->nr_scanned[1]; - stats[SCAN_ANON] += rec->nr_scanned[0]; - stats[SCAN_FILE] += rec->nr_scanned[1]; - - stats[ROTATE] += rec->nr_rotated[0] + rec->nr_rotated[1]; - stats[ROTATE_ANON] += rec->nr_rotated[0]; - stats[ROTATE_FILE] += rec->nr_rotated[1]; - - stats[FREED] += rec->nr_freed[0] + rec->nr_freed[1]; - stats[FREED_ANON] += rec->nr_freed[0]; - stats[FREED_FILE] += rec->nr_freed[1]; - - stats[ELAPSED] += rec->elapsed; -} - -static void mem_cgroup_record_scanstat(struct memcg_scanrecord *rec) -{ - struct mem_cgroup *mem; - int context = rec->context; - - if (context >= NR_SCAN_CONTEXT) - return; - - mem = rec->mem; - spin_lock(&mem->scanstat.lock); - __mem_cgroup_record_scanstat(mem->scanstat.stats[context], rec); - spin_unlock(&mem->scanstat.lock); - - mem = rec->root; - spin_lock(&mem->scanstat.lock); - __mem_cgroup_record_scanstat(mem->scanstat.rootstats[context], rec); - spin_unlock(&mem->scanstat.lock); -} - /* * Scan the hierarchy if needed to reclaim memory. We remember the last child * we reclaimed from, so that we don't end up penalizing one child extensively @@ -1740,9 +1657,8 @@ static int mem_cgroup_hierarchical_reclaim(struct mem_cgroup *root_mem, bool noswap = reclaim_options & MEM_CGROUP_RECLAIM_NOSWAP; bool shrink = reclaim_options & MEM_CGROUP_RECLAIM_SHRINK; bool check_soft = reclaim_options & MEM_CGROUP_RECLAIM_SOFT; - struct memcg_scanrecord rec; unsigned long excess; - unsigned long scanned; + unsigned long nr_scanned; excess = res_counter_soft_limit_excess(&root_mem->res) >> PAGE_SHIFT; @@ -1750,15 +1666,6 @@ static int mem_cgroup_hierarchical_reclaim(struct mem_cgroup *root_mem, if (!check_soft && !shrink && root_mem->memsw_is_minimum) noswap = true; - if (shrink) - rec.context = SCAN_BY_SHRINK; - else if (check_soft) - rec.context = SCAN_BY_SYSTEM; - else - rec.context = SCAN_BY_LIMIT; - - rec.root = root_mem; - while (1) { victim = mem_cgroup_select_victim(root_mem); if (victim == root_mem) { @@ -1799,23 +1706,14 @@ static int mem_cgroup_hierarchical_reclaim(struct mem_cgroup *root_mem, css_put(&victim->css); continue; } - rec.mem = victim; - rec.nr_scanned[0] = 0; - rec.nr_scanned[1] = 0; - rec.nr_rotated[0] = 0; - rec.nr_rotated[1] = 0; - rec.nr_freed[0] = 0; - rec.nr_freed[1] = 0; - rec.elapsed = 0; /* we use swappiness of local cgroup */ if (check_soft) { ret = mem_cgroup_shrink_node_zone(victim, gfp_mask, - noswap, zone, &rec, &scanned); - *total_scanned += scanned; + noswap, zone, &nr_scanned); + *total_scanned += nr_scanned; } else ret = try_to_free_mem_cgroup_pages(victim, gfp_mask, - noswap, &rec); - mem_cgroup_record_scanstat(&rec); + noswap); css_put(&victim->css); /* * At shrinking usage, we can't check we should stop here or @@ -3854,18 +3752,14 @@ try_to_free: /* try to free all pages in this cgroup */ shrink = 1; while (nr_retries && mem->res.usage > 0) { - struct memcg_scanrecord rec; int progress; if (signal_pending(current)) { ret = -EINTR; goto out; } - rec.context = SCAN_BY_SHRINK; - rec.mem = mem; - rec.root = mem; progress = try_to_free_mem_cgroup_pages(mem, GFP_KERNEL, - false, &rec); + false); if (!progress) { nr_retries--; /* maybe some writeback is necessary */ @@ -4709,54 +4603,6 @@ static int mem_control_numa_stat_open(struct inode *unused, struct file *file) } #endif /* CONFIG_NUMA */ -static int mem_cgroup_vmscan_stat_read(struct cgroup *cgrp, - struct cftype *cft, - struct cgroup_map_cb *cb) -{ - struct mem_cgroup *mem = mem_cgroup_from_cont(cgrp); - char string[64]; - int i; - - for (i = 0; i < NR_SCANSTATS; i++) { - strcpy(string, scanstat_string[i]); - strcat(string, SCANSTAT_WORD_LIMIT); - cb->fill(cb, string, mem->scanstat.stats[SCAN_BY_LIMIT][i]); - } - - for (i = 0; i < NR_SCANSTATS; i++) { - strcpy(string, scanstat_string[i]); - strcat(string, SCANSTAT_WORD_SYSTEM); - cb->fill(cb, string, mem->scanstat.stats[SCAN_BY_SYSTEM][i]); - } - - for (i = 0; i < NR_SCANSTATS; i++) { - strcpy(string, scanstat_string[i]); - strcat(string, SCANSTAT_WORD_LIMIT); - strcat(string, SCANSTAT_WORD_HIERARCHY); - cb->fill(cb, string, mem->scanstat.rootstats[SCAN_BY_LIMIT][i]); - } - for (i = 0; i < NR_SCANSTATS; i++) { - strcpy(string, scanstat_string[i]); - strcat(string, SCANSTAT_WORD_SYSTEM); - strcat(string, SCANSTAT_WORD_HIERARCHY); - cb->fill(cb, string, mem->scanstat.rootstats[SCAN_BY_SYSTEM][i]); - } - return 0; -} - -static int mem_cgroup_reset_vmscan_stat(struct cgroup *cgrp, - unsigned int event) -{ - struct mem_cgroup *mem = mem_cgroup_from_cont(cgrp); - - spin_lock(&mem->scanstat.lock); - memset(&mem->scanstat.stats, 0, sizeof(mem->scanstat.stats)); - memset(&mem->scanstat.rootstats, 0, sizeof(mem->scanstat.rootstats)); - spin_unlock(&mem->scanstat.lock); - return 0; -} - - static struct cftype mem_cgroup_files[] = { { .name = "usage_in_bytes", @@ -4827,11 +4673,6 @@ static struct cftype mem_cgroup_files[] = { .mode = S_IRUGO, }, #endif - { - .name = "vmscan_stat", - .read_map = mem_cgroup_vmscan_stat_read, - .trigger = mem_cgroup_reset_vmscan_stat, - }, }; #ifdef CONFIG_CGROUP_MEM_RES_CTLR_SWAP @@ -5095,7 +4936,6 @@ mem_cgroup_create(struct cgroup_subsys *ss, struct cgroup *cont) atomic_set(&mem->refcnt, 1); mem->move_charge_at_immigrate = 0; mutex_init(&mem->thresholds_lock); - spin_lock_init(&mem->scanstat.lock); return &mem->css; free_out: __mem_cgroup_free(mem); diff --git a/mm/mempolicy.c b/mm/mempolicy.c index 8b57173..9c51f9f 100644 --- a/mm/mempolicy.c +++ b/mm/mempolicy.c @@ -636,7 +636,6 @@ static int mbind_range(struct mm_struct *mm, unsigned long start, struct vm_area_struct *prev; struct vm_area_struct *vma; int err = 0; - pgoff_t pgoff; unsigned long vmstart; unsigned long vmend; @@ -649,9 +648,9 @@ static int mbind_range(struct mm_struct *mm, unsigned long start, vmstart = max(start, vma->vm_start); vmend = min(end, vma->vm_end); - pgoff = vma->vm_pgoff + ((start - vma->vm_start) >> PAGE_SHIFT); prev = vma_merge(mm, prev, vmstart, vmend, vma->vm_flags, - vma->anon_vma, vma->vm_file, pgoff, new_pol); + vma->anon_vma, vma->vm_file, vma->vm_pgoff, + new_pol); if (prev) { vma = prev; next = vma->vm_next; @@ -1412,7 +1411,9 @@ asmlinkage long compat_sys_get_mempolicy(int __user *policy, err = sys_get_mempolicy(policy, nm, nr_bits+1, addr, flags); if (!err && nmask) { - err = copy_from_user(bm, nm, alloc_size); + unsigned long copy_size; + copy_size = min_t(unsigned long, sizeof(bm), alloc_size); + err = copy_from_user(bm, nm, copy_size); /* ensure entire bitmap is zeroed */ err |= clear_user(nmask, ALIGN(maxnode-1, 8) / 8); err |= compat_put_bitmap(nmask, bm, nr_bits); @@ -2377,7 +2377,7 @@ static void __slab_free(struct kmem_cache *s, struct page *page, */ if (unlikely(!prior)) { remove_full(s, page); - add_partial(n, page, 0); + add_partial(n, page, 1); stat(s, FREE_ADD_PARTIAL); } } diff --git a/mm/vmalloc.c b/mm/vmalloc.c index 7ef0903..5016f19 100644 --- a/mm/vmalloc.c +++ b/mm/vmalloc.c @@ -2140,6 +2140,14 @@ struct vm_struct *alloc_vm_area(size_t size) return NULL; } + /* + * If the allocated address space is passed to a hypercall + * before being used then we cannot rely on a page fault to + * trigger an update of the page tables. So sync all the page + * tables here. + */ + vmalloc_sync_all(); + return area; } EXPORT_SYMBOL_GPL(alloc_vm_area); diff --git a/mm/vmscan.c b/mm/vmscan.c index b7719ec..b55699c 100644 --- a/mm/vmscan.c +++ b/mm/vmscan.c @@ -105,7 +105,6 @@ struct scan_control { /* Which cgroup do we reclaim from */ struct mem_cgroup *mem_cgroup; - struct memcg_scanrecord *memcg_record; /* * Nodemask of nodes allowed by the caller. If NULL, all nodes @@ -1349,8 +1348,6 @@ putback_lru_pages(struct zone *zone, struct scan_control *sc, int file = is_file_lru(lru); int numpages = hpage_nr_pages(page); reclaim_stat->recent_rotated[file] += numpages; - if (!scanning_global_lru(sc)) - sc->memcg_record->nr_rotated[file] += numpages; } if (!pagevec_add(&pvec, page)) { spin_unlock_irq(&zone->lru_lock); @@ -1394,10 +1391,6 @@ static noinline_for_stack void update_isolated_counts(struct zone *zone, reclaim_stat->recent_scanned[0] += *nr_anon; reclaim_stat->recent_scanned[1] += *nr_file; - if (!scanning_global_lru(sc)) { - sc->memcg_record->nr_scanned[0] += *nr_anon; - sc->memcg_record->nr_scanned[1] += *nr_file; - } } /* @@ -1511,9 +1504,6 @@ shrink_inactive_list(unsigned long nr_to_scan, struct zone *zone, nr_reclaimed += shrink_page_list(&page_list, zone, sc); } - if (!scanning_global_lru(sc)) - sc->memcg_record->nr_freed[file] += nr_reclaimed; - local_irq_disable(); if (current_is_kswapd()) __count_vm_events(KSWAPD_STEAL, nr_reclaimed); @@ -1613,8 +1603,6 @@ static void shrink_active_list(unsigned long nr_pages, struct zone *zone, } reclaim_stat->recent_scanned[file] += nr_taken; - if (!scanning_global_lru(sc)) - sc->memcg_record->nr_scanned[file] += nr_taken; __count_zone_vm_events(PGREFILL, zone, pgscanned); if (file) @@ -1666,8 +1654,6 @@ static void shrink_active_list(unsigned long nr_pages, struct zone *zone, * get_scan_ratio. */ reclaim_stat->recent_rotated[file] += nr_rotated; - if (!scanning_global_lru(sc)) - sc->memcg_record->nr_rotated[file] += nr_rotated; move_active_pages_to_lru(zone, &l_active, LRU_ACTIVE + file * LRU_FILE); @@ -1808,23 +1794,15 @@ static void get_scan_count(struct zone *zone, struct scan_control *sc, u64 fraction[2], denominator; enum lru_list l; int noswap = 0; - int force_scan = 0; + bool force_scan = false; unsigned long nr_force_scan[2]; - - anon = zone_nr_lru_pages(zone, sc, LRU_ACTIVE_ANON) + - zone_nr_lru_pages(zone, sc, LRU_INACTIVE_ANON); - file = zone_nr_lru_pages(zone, sc, LRU_ACTIVE_FILE) + - zone_nr_lru_pages(zone, sc, LRU_INACTIVE_FILE); - - if (((anon + file) >> priority) < SWAP_CLUSTER_MAX) { - /* kswapd does zone balancing and need to scan this zone */ - if (scanning_global_lru(sc) && current_is_kswapd()) - force_scan = 1; - /* memcg may have small limit and need to avoid priority drop */ - if (!scanning_global_lru(sc)) - force_scan = 1; - } + /* kswapd does zone balancing and needs to scan this zone */ + if (scanning_global_lru(sc) && current_is_kswapd()) + force_scan = true; + /* memcg may have small limit and need to avoid priority drop */ + if (!scanning_global_lru(sc)) + force_scan = true; /* If we have no swap space, do not bother scanning anon pages. */ if (!sc->may_swap || (nr_swap_pages <= 0)) { @@ -1837,6 +1815,11 @@ static void get_scan_count(struct zone *zone, struct scan_control *sc, goto out; } + anon = zone_nr_lru_pages(zone, sc, LRU_ACTIVE_ANON) + + zone_nr_lru_pages(zone, sc, LRU_INACTIVE_ANON); + file = zone_nr_lru_pages(zone, sc, LRU_ACTIVE_FILE) + + zone_nr_lru_pages(zone, sc, LRU_INACTIVE_FILE); + if (scanning_global_lru(sc)) { free = zone_page_state(zone, NR_FREE_PAGES); /* If we have very few page cache pages, @@ -2268,10 +2251,9 @@ unsigned long try_to_free_pages(struct zonelist *zonelist, int order, #ifdef CONFIG_CGROUP_MEM_RES_CTLR unsigned long mem_cgroup_shrink_node_zone(struct mem_cgroup *mem, - gfp_t gfp_mask, bool noswap, - struct zone *zone, - struct memcg_scanrecord *rec, - unsigned long *scanned) + gfp_t gfp_mask, bool noswap, + struct zone *zone, + unsigned long *nr_scanned) { struct scan_control sc = { .nr_scanned = 0, @@ -2281,9 +2263,7 @@ unsigned long mem_cgroup_shrink_node_zone(struct mem_cgroup *mem, .may_swap = !noswap, .order = 0, .mem_cgroup = mem, - .memcg_record = rec, }; - ktime_t start, end; sc.gfp_mask = (gfp_mask & GFP_RECLAIM_MASK) | (GFP_HIGHUSER_MOVABLE & ~GFP_RECLAIM_MASK); @@ -2292,7 +2272,6 @@ unsigned long mem_cgroup_shrink_node_zone(struct mem_cgroup *mem, sc.may_writepage, sc.gfp_mask); - start = ktime_get(); /* * NOTE: Although we can get the priority field, using it * here is not a good idea, since it limits the pages we can scan. @@ -2301,25 +2280,19 @@ unsigned long mem_cgroup_shrink_node_zone(struct mem_cgroup *mem, * the priority and make it zero. */ shrink_zone(0, zone, &sc); - end = ktime_get(); - - if (rec) - rec->elapsed += ktime_to_ns(ktime_sub(end, start)); - *scanned = sc.nr_scanned; trace_mm_vmscan_memcg_softlimit_reclaim_end(sc.nr_reclaimed); + *nr_scanned = sc.nr_scanned; return sc.nr_reclaimed; } unsigned long try_to_free_mem_cgroup_pages(struct mem_cgroup *mem_cont, gfp_t gfp_mask, - bool noswap, - struct memcg_scanrecord *rec) + bool noswap) { struct zonelist *zonelist; unsigned long nr_reclaimed; - ktime_t start, end; int nid; struct scan_control sc = { .may_writepage = !laptop_mode, @@ -2328,7 +2301,6 @@ unsigned long try_to_free_mem_cgroup_pages(struct mem_cgroup *mem_cont, .nr_to_reclaim = SWAP_CLUSTER_MAX, .order = 0, .mem_cgroup = mem_cont, - .memcg_record = rec, .nodemask = NULL, /* we don't care the placement */ .gfp_mask = (gfp_mask & GFP_RECLAIM_MASK) | (GFP_HIGHUSER_MOVABLE & ~GFP_RECLAIM_MASK), @@ -2337,7 +2309,6 @@ unsigned long try_to_free_mem_cgroup_pages(struct mem_cgroup *mem_cont, .gfp_mask = sc.gfp_mask, }; - start = ktime_get(); /* * Unlike direct reclaim via alloc_pages(), memcg's reclaim doesn't * take care of from where we get pages. So the node where we start the @@ -2352,9 +2323,6 @@ unsigned long try_to_free_mem_cgroup_pages(struct mem_cgroup *mem_cont, sc.gfp_mask); nr_reclaimed = do_try_to_free_pages(zonelist, &sc, &shrink); - end = ktime_get(); - if (rec) - rec->elapsed += ktime_to_ns(ktime_sub(end, start)); trace_mm_vmscan_memcg_reclaim_end(nr_reclaimed); diff --git a/mm/vmstat.c b/mm/vmstat.c index 20c18b7..d52b13d 100644 --- a/mm/vmstat.c +++ b/mm/vmstat.c @@ -659,7 +659,7 @@ static void walk_zones_in_node(struct seq_file *m, pg_data_t *pgdat, } #endif -#if defined(CONFIG_PROC_FS) || defined(CONFIG_SYSFS) +#if defined(CONFIG_PROC_FS) || defined(CONFIG_SYSFS) || defined(CONFIG_NUMA) #ifdef CONFIG_ZONE_DMA #define TEXT_FOR_DMA(xx) xx "_dma", #else @@ -788,7 +788,7 @@ const char * const vmstat_text[] = { #endif /* CONFIG_VM_EVENTS_COUNTERS */ }; -#endif /* CONFIG_PROC_FS || CONFIG_SYSFS */ +#endif /* CONFIG_PROC_FS || CONFIG_SYSFS || CONFIG_NUMA */ #ifdef CONFIG_PROC_FS diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c index a40170e..7ef4eb4 100644 --- a/net/bluetooth/hci_event.c +++ b/net/bluetooth/hci_event.c @@ -58,8 +58,8 @@ static void hci_cc_inquiry_cancel(struct hci_dev *hdev, struct sk_buff *skb) if (status) return; - if (test_bit(HCI_MGMT, &hdev->flags) && - test_and_clear_bit(HCI_INQUIRY, &hdev->flags)) + if (test_and_clear_bit(HCI_INQUIRY, &hdev->flags) && + test_bit(HCI_MGMT, &hdev->flags)) mgmt_discovering(hdev->id, 0); hci_req_complete(hdev, HCI_OP_INQUIRY_CANCEL, status); @@ -76,8 +76,8 @@ static void hci_cc_exit_periodic_inq(struct hci_dev *hdev, struct sk_buff *skb) if (status) return; - if (test_bit(HCI_MGMT, &hdev->flags) && - test_and_clear_bit(HCI_INQUIRY, &hdev->flags)) + if (test_and_clear_bit(HCI_INQUIRY, &hdev->flags) && + test_bit(HCI_MGMT, &hdev->flags)) mgmt_discovering(hdev->id, 0); hci_conn_check_pending(hdev); @@ -959,9 +959,8 @@ static inline void hci_cs_inquiry(struct hci_dev *hdev, __u8 status) return; } - if (test_bit(HCI_MGMT, &hdev->flags) && - !test_and_set_bit(HCI_INQUIRY, - &hdev->flags)) + if (!test_and_set_bit(HCI_INQUIRY, &hdev->flags) && + test_bit(HCI_MGMT, &hdev->flags)) mgmt_discovering(hdev->id, 1); } @@ -1340,8 +1339,8 @@ static inline void hci_inquiry_complete_evt(struct hci_dev *hdev, struct sk_buff BT_DBG("%s status %d", hdev->name, status); - if (test_bit(HCI_MGMT, &hdev->flags) && - test_and_clear_bit(HCI_INQUIRY, &hdev->flags)) + if (test_and_clear_bit(HCI_INQUIRY, &hdev->flags) && + test_bit(HCI_MGMT, &hdev->flags)) mgmt_discovering(hdev->id, 0); hci_req_complete(hdev, HCI_OP_INQUIRY, status); diff --git a/net/bridge/netfilter/Kconfig b/net/bridge/netfilter/Kconfig index ba6f73e..a9aff9c 100644 --- a/net/bridge/netfilter/Kconfig +++ b/net/bridge/netfilter/Kconfig @@ -4,7 +4,7 @@ menuconfig BRIDGE_NF_EBTABLES tristate "Ethernet Bridge tables (ebtables) support" - depends on BRIDGE && BRIDGE_NETFILTER + depends on BRIDGE && NETFILTER select NETFILTER_XTABLES help ebtables is a general, extensible frame/packet identification diff --git a/net/caif/caif_dev.c b/net/caif/caif_dev.c index 7c2fa0a..7f9ac07 100644 --- a/net/caif/caif_dev.c +++ b/net/caif/caif_dev.c @@ -93,10 +93,14 @@ static struct caif_device_entry *caif_device_alloc(struct net_device *dev) caifdevs = caif_device_list(dev_net(dev)); BUG_ON(!caifdevs); - caifd = kzalloc(sizeof(*caifd), GFP_ATOMIC); + caifd = kzalloc(sizeof(*caifd), GFP_KERNEL); if (!caifd) return NULL; caifd->pcpu_refcnt = alloc_percpu(int); + if (!caifd->pcpu_refcnt) { + kfree(caifd); + return NULL; + } caifd->netdev = dev; dev_hold(dev); return caifd; diff --git a/net/can/af_can.c b/net/can/af_can.c index 8ce926d..9b0c32a 100644 --- a/net/can/af_can.c +++ b/net/can/af_can.c @@ -857,7 +857,7 @@ static __exit void can_exit(void) struct net_device *dev; if (stats_timer) - del_timer(&can_stattimer); + del_timer_sync(&can_stattimer); can_remove_proc(); diff --git a/net/core/dev.c b/net/core/dev.c index 17d67b5..b10ff0a 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -1515,6 +1515,14 @@ static inline bool is_skb_forwardable(struct net_device *dev, */ int dev_forward_skb(struct net_device *dev, struct sk_buff *skb) { + if (skb_shinfo(skb)->tx_flags & SKBTX_DEV_ZEROCOPY) { + if (skb_copy_ubufs(skb, GFP_ATOMIC)) { + atomic_long_inc(&dev->rx_dropped); + kfree_skb(skb); + return NET_RX_DROP; + } + } + skb_orphan(skb); nf_reset(skb); diff --git a/net/core/fib_rules.c b/net/core/fib_rules.c index e7ab0c0..3231b46 100644 --- a/net/core/fib_rules.c +++ b/net/core/fib_rules.c @@ -384,8 +384,8 @@ static int fib_nl_newrule(struct sk_buff *skb, struct nlmsghdr* nlh, void *arg) */ list_for_each_entry(r, &ops->rules_list, list) { if (r->action == FR_ACT_GOTO && - r->target == rule->pref) { - BUG_ON(rtnl_dereference(r->ctarget) != NULL); + r->target == rule->pref && + rtnl_dereference(r->ctarget) == NULL) { rcu_assign_pointer(r->ctarget, rule); if (--ops->unresolved_rules == 0) break; diff --git a/net/core/flow.c b/net/core/flow.c index bf32c33..555a456 100644 --- a/net/core/flow.c +++ b/net/core/flow.c @@ -30,6 +30,7 @@ struct flow_cache_entry { struct hlist_node hlist; struct list_head gc_list; } u; + struct net *net; u16 family; u8 dir; u32 genid; @@ -172,29 +173,26 @@ static void flow_new_hash_rnd(struct flow_cache *fc, static u32 flow_hash_code(struct flow_cache *fc, struct flow_cache_percpu *fcp, - const struct flowi *key) + const struct flowi *key, + size_t keysize) { const u32 *k = (const u32 *) key; + const u32 length = keysize * sizeof(flow_compare_t) / sizeof(u32); - return jhash2(k, (sizeof(*key) / sizeof(u32)), fcp->hash_rnd) + return jhash2(k, length, fcp->hash_rnd) & (flow_cache_hash_size(fc) - 1); } -typedef unsigned long flow_compare_t; - /* I hear what you're saying, use memcmp. But memcmp cannot make - * important assumptions that we can here, such as alignment and - * constant size. + * important assumptions that we can here, such as alignment. */ -static int flow_key_compare(const struct flowi *key1, const struct flowi *key2) +static int flow_key_compare(const struct flowi *key1, const struct flowi *key2, + size_t keysize) { const flow_compare_t *k1, *k1_lim, *k2; - const int n_elem = sizeof(struct flowi) / sizeof(flow_compare_t); - - BUILD_BUG_ON(sizeof(struct flowi) % sizeof(flow_compare_t)); k1 = (const flow_compare_t *) key1; - k1_lim = k1 + n_elem; + k1_lim = k1 + keysize; k2 = (const flow_compare_t *) key2; @@ -215,6 +213,7 @@ flow_cache_lookup(struct net *net, const struct flowi *key, u16 family, u8 dir, struct flow_cache_entry *fle, *tfle; struct hlist_node *entry; struct flow_cache_object *flo; + size_t keysize; unsigned int hash; local_bh_disable(); @@ -222,6 +221,11 @@ flow_cache_lookup(struct net *net, const struct flowi *key, u16 family, u8 dir, fle = NULL; flo = NULL; + + keysize = flow_key_size(family); + if (!keysize) + goto nocache; + /* Packet really early in init? Making flow_cache_init a * pre-smp initcall would solve this. --RR */ if (!fcp->hash_table) @@ -230,11 +234,12 @@ flow_cache_lookup(struct net *net, const struct flowi *key, u16 family, u8 dir, if (fcp->hash_rnd_recalc) flow_new_hash_rnd(fc, fcp); - hash = flow_hash_code(fc, fcp, key); + hash = flow_hash_code(fc, fcp, key, keysize); hlist_for_each_entry(tfle, entry, &fcp->hash_table[hash], u.hlist) { - if (tfle->family == family && + if (tfle->net == net && + tfle->family == family && tfle->dir == dir && - flow_key_compare(key, &tfle->key) == 0) { + flow_key_compare(key, &tfle->key, keysize) == 0) { fle = tfle; break; } @@ -246,9 +251,10 @@ flow_cache_lookup(struct net *net, const struct flowi *key, u16 family, u8 dir, fle = kmem_cache_alloc(flow_cachep, GFP_ATOMIC); if (fle) { + fle->net = net; fle->family = family; fle->dir = dir; - memcpy(&fle->key, key, sizeof(*key)); + memcpy(&fle->key, key, keysize * sizeof(flow_compare_t)); fle->object = NULL; hlist_add_head(&fle->u.hlist, &fcp->hash_table[hash]); fcp->hash_count++; diff --git a/net/core/skbuff.c b/net/core/skbuff.c index 27002df..387703f 100644 --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -611,8 +611,21 @@ struct sk_buff *skb_morph(struct sk_buff *dst, struct sk_buff *src) } EXPORT_SYMBOL_GPL(skb_morph); -/* skb frags copy userspace buffers to kernel */ -static int skb_copy_ubufs(struct sk_buff *skb, gfp_t gfp_mask) +/* skb_copy_ubufs - copy userspace skb frags buffers to kernel + * @skb: the skb to modify + * @gfp_mask: allocation priority + * + * This must be called on SKBTX_DEV_ZEROCOPY skb. + * It will copy all frags into kernel and drop the reference + * to userspace pages. + * + * If this function is called from an interrupt gfp_mask() must be + * %GFP_ATOMIC. + * + * Returns 0 on success or a negative error code on failure + * to allocate kernel memory to copy to. + */ +int skb_copy_ubufs(struct sk_buff *skb, gfp_t gfp_mask) { int i; int num_frags = skb_shinfo(skb)->nr_frags; @@ -652,6 +665,8 @@ static int skb_copy_ubufs(struct sk_buff *skb, gfp_t gfp_mask) skb_shinfo(skb)->frags[i - 1].page = head; head = (struct page *)head->private; } + + skb_shinfo(skb)->tx_flags &= ~SKBTX_DEV_ZEROCOPY; return 0; } @@ -677,7 +692,6 @@ struct sk_buff *skb_clone(struct sk_buff *skb, gfp_t gfp_mask) if (skb_shinfo(skb)->tx_flags & SKBTX_DEV_ZEROCOPY) { if (skb_copy_ubufs(skb, gfp_mask)) return NULL; - skb_shinfo(skb)->tx_flags &= ~SKBTX_DEV_ZEROCOPY; } n = skb + 1; @@ -803,7 +817,6 @@ struct sk_buff *pskb_copy(struct sk_buff *skb, gfp_t gfp_mask) n = NULL; goto out; } - skb_shinfo(skb)->tx_flags &= ~SKBTX_DEV_ZEROCOPY; } for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) { skb_shinfo(n)->frags[i] = skb_shinfo(skb)->frags[i]; @@ -896,7 +909,6 @@ int pskb_expand_head(struct sk_buff *skb, int nhead, int ntail, if (skb_shinfo(skb)->tx_flags & SKBTX_DEV_ZEROCOPY) { if (skb_copy_ubufs(skb, gfp_mask)) goto nofrags; - skb_shinfo(skb)->tx_flags &= ~SKBTX_DEV_ZEROCOPY; } for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) get_page(skb_shinfo(skb)->frags[i].page); diff --git a/net/ethernet/eth.c b/net/ethernet/eth.c index 27997d3..a246836 100644 --- a/net/ethernet/eth.c +++ b/net/ethernet/eth.c @@ -340,7 +340,7 @@ void ether_setup(struct net_device *dev) dev->addr_len = ETH_ALEN; dev->tx_queue_len = 1000; /* Ethernet wants good queues */ dev->flags = IFF_BROADCAST|IFF_MULTICAST; - dev->priv_flags = IFF_TX_SKB_SHARING; + dev->priv_flags |= IFF_TX_SKB_SHARING; memset(dev->broadcast, 0xFF, ETH_ALEN); diff --git a/net/ipv4/af_inet.c b/net/ipv4/af_inet.c index 1b745d4..dd2b947 100644 --- a/net/ipv4/af_inet.c +++ b/net/ipv4/af_inet.c @@ -466,8 +466,13 @@ int inet_bind(struct socket *sock, struct sockaddr *uaddr, int addr_len) goto out; if (addr->sin_family != AF_INET) { + /* Compatibility games : accept AF_UNSPEC (mapped to AF_INET) + * only if s_addr is INADDR_ANY. + */ err = -EAFNOSUPPORT; - goto out; + if (addr->sin_family != AF_UNSPEC || + addr->sin_addr.s_addr != htonl(INADDR_ANY)) + goto out; } chk_addr_ret = inet_addr_type(sock_net(sk), addr->sin_addr.s_addr); diff --git a/net/ipv4/fib_semantics.c b/net/ipv4/fib_semantics.c index 33e2c35..80106d8 100644 --- a/net/ipv4/fib_semantics.c +++ b/net/ipv4/fib_semantics.c @@ -142,6 +142,14 @@ const struct fib_prop fib_props[RTN_MAX + 1] = { }; /* Release a nexthop info record */ +static void free_fib_info_rcu(struct rcu_head *head) +{ + struct fib_info *fi = container_of(head, struct fib_info, rcu); + + if (fi->fib_metrics != (u32 *) dst_default_metrics) + kfree(fi->fib_metrics); + kfree(fi); +} void free_fib_info(struct fib_info *fi) { @@ -156,7 +164,7 @@ void free_fib_info(struct fib_info *fi) } endfor_nexthops(fi); fib_info_cnt--; release_net(fi->fib_net); - kfree_rcu(fi, rcu); + call_rcu(&fi->rcu, free_fib_info_rcu); } void fib_release_info(struct fib_info *fi) diff --git a/net/ipv4/netfilter/ip_queue.c b/net/ipv4/netfilter/ip_queue.c index 5c9b9d9..e59aabd 100644 --- a/net/ipv4/netfilter/ip_queue.c +++ b/net/ipv4/netfilter/ip_queue.c @@ -218,6 +218,7 @@ ipq_build_packet_message(struct nf_queue_entry *entry, int *errp) return skb; nlmsg_failure: + kfree_skb(skb); *errp = -EINVAL; printk(KERN_ERR "ip_queue: error creating packet message\n"); return NULL; @@ -313,7 +314,7 @@ ipq_set_verdict(struct ipq_verdict_msg *vmsg, unsigned int len) { struct nf_queue_entry *entry; - if (vmsg->value > NF_MAX_VERDICT) + if (vmsg->value > NF_MAX_VERDICT || vmsg->value == NF_STOLEN) return -EINVAL; entry = ipq_find_dequeue_entry(vmsg->id); @@ -358,12 +359,9 @@ ipq_receive_peer(struct ipq_peer_msg *pmsg, break; case IPQM_VERDICT: - if (pmsg->msg.verdict.value > NF_MAX_VERDICT) - status = -EINVAL; - else - status = ipq_set_verdict(&pmsg->msg.verdict, - len - sizeof(*pmsg)); - break; + status = ipq_set_verdict(&pmsg->msg.verdict, + len - sizeof(*pmsg)); + break; default: status = -EINVAL; } diff --git a/net/ipv4/proc.c b/net/ipv4/proc.c index b14ec7d..4bfad5d 100644 --- a/net/ipv4/proc.c +++ b/net/ipv4/proc.c @@ -254,6 +254,8 @@ static const struct snmp_mib snmp4_net_list[] = { SNMP_MIB_ITEM("TCPDeferAcceptDrop", LINUX_MIB_TCPDEFERACCEPTDROP), SNMP_MIB_ITEM("IPReversePathFilter", LINUX_MIB_IPRPFILTER), SNMP_MIB_ITEM("TCPTimeWaitOverflow", LINUX_MIB_TCPTIMEWAITOVERFLOW), + SNMP_MIB_ITEM("TCPReqQFullDoCookies", LINUX_MIB_TCPREQQFULLDOCOOKIES), + SNMP_MIB_ITEM("TCPReqQFullDrop", LINUX_MIB_TCPREQQFULLDROP), SNMP_MIB_SENTINEL }; diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index ea0d218..21fab3e 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -1124,7 +1124,7 @@ static int tcp_is_sackblock_valid(struct tcp_sock *tp, int is_dsack, return 0; /* ...Then it's D-SACK, and must reside below snd_una completely */ - if (!after(end_seq, tp->snd_una)) + if (after(end_seq, tp->snd_una)) return 0; if (!before(start_seq, tp->undo_marker)) diff --git a/net/ipv4/tcp_ipv4.c b/net/ipv4/tcp_ipv4.c index 1c12b8e..c34f015 100644 --- a/net/ipv4/tcp_ipv4.c +++ b/net/ipv4/tcp_ipv4.c @@ -808,20 +808,38 @@ static void tcp_v4_reqsk_destructor(struct request_sock *req) kfree(inet_rsk(req)->opt); } -static void syn_flood_warning(const struct sk_buff *skb) +/* + * Return 1 if a syncookie should be sent + */ +int tcp_syn_flood_action(struct sock *sk, + const struct sk_buff *skb, + const char *proto) { - const char *msg; + const char *msg = "Dropping request"; + int want_cookie = 0; + struct listen_sock *lopt; + + #ifdef CONFIG_SYN_COOKIES - if (sysctl_tcp_syncookies) + if (sysctl_tcp_syncookies) { msg = "Sending cookies"; - else + want_cookie = 1; + NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_TCPREQQFULLDOCOOKIES); + } else #endif - msg = "Dropping request"; + NET_INC_STATS_BH(sock_net(sk), LINUX_MIB_TCPREQQFULLDROP); - pr_info("TCP: Possible SYN flooding on port %d. %s.\n", - ntohs(tcp_hdr(skb)->dest), msg); + lopt = inet_csk(sk)->icsk_accept_queue.listen_opt; + if (!lopt->synflood_warned) { + lopt->synflood_warned = 1; + pr_info("%s: Possible SYN flooding on port %d. %s. " + " Check SNMP counters.\n", + proto, ntohs(tcp_hdr(skb)->dest), msg); + } + return want_cookie; } +EXPORT_SYMBOL(tcp_syn_flood_action); /* * Save and compile IPv4 options into the request_sock if needed. @@ -1235,11 +1253,7 @@ int tcp_v4_conn_request(struct sock *sk, struct sk_buff *skb) __be32 saddr = ip_hdr(skb)->saddr; __be32 daddr = ip_hdr(skb)->daddr; __u32 isn = TCP_SKB_CB(skb)->when; -#ifdef CONFIG_SYN_COOKIES int want_cookie = 0; -#else -#define want_cookie 0 /* Argh, why doesn't gcc optimize this :( */ -#endif /* Never answer to SYNs send to broadcast or multicast */ if (skb_rtable(skb)->rt_flags & (RTCF_BROADCAST | RTCF_MULTICAST)) @@ -1250,14 +1264,9 @@ int tcp_v4_conn_request(struct sock *sk, struct sk_buff *skb) * evidently real one. */ if (inet_csk_reqsk_queue_is_full(sk) && !isn) { - if (net_ratelimit()) - syn_flood_warning(skb); -#ifdef CONFIG_SYN_COOKIES - if (sysctl_tcp_syncookies) { - want_cookie = 1; - } else -#endif - goto drop; + want_cookie = tcp_syn_flood_action(sk, skb, "TCP"); + if (!want_cookie) + goto drop; } /* Accept backlog is full. If we have already queued enough @@ -1303,9 +1312,7 @@ int tcp_v4_conn_request(struct sock *sk, struct sk_buff *skb) while (l-- > 0) *c++ ^= *hash_location++; -#ifdef CONFIG_SYN_COOKIES want_cookie = 0; /* not our kind of cookie */ -#endif tmp_ext.cookie_out_never = 0; /* false */ tmp_ext.cookie_plus = tmp_opt.cookie_plus; } else if (!tp->rx_opt.cookie_in_always) { diff --git a/net/ipv6/addrconf.c b/net/ipv6/addrconf.c index f012ebd..12368c5 100644 --- a/net/ipv6/addrconf.c +++ b/net/ipv6/addrconf.c @@ -374,8 +374,8 @@ static struct inet6_dev * ipv6_add_dev(struct net_device *dev) "%s(): cannot allocate memory for statistics; dev=%s.\n", __func__, dev->name)); neigh_parms_release(&nd_tbl, ndev->nd_parms); - ndev->dead = 1; - in6_dev_finish_destroy(ndev); + dev_put(dev); + kfree(ndev); return NULL; } diff --git a/net/ipv6/datagram.c b/net/ipv6/datagram.c index 9ef1831..b46e9f8 100644 --- a/net/ipv6/datagram.c +++ b/net/ipv6/datagram.c @@ -599,7 +599,7 @@ int datagram_recv_ctl(struct sock *sk, struct msghdr *msg, struct sk_buff *skb) return 0; } -int datagram_send_ctl(struct net *net, +int datagram_send_ctl(struct net *net, struct sock *sk, struct msghdr *msg, struct flowi6 *fl6, struct ipv6_txoptions *opt, int *hlimit, int *tclass, int *dontfrag) @@ -658,7 +658,8 @@ int datagram_send_ctl(struct net *net, if (addr_type != IPV6_ADDR_ANY) { int strict = __ipv6_addr_src_scope(addr_type) <= IPV6_ADDR_SCOPE_LINKLOCAL; - if (!ipv6_chk_addr(net, &src_info->ipi6_addr, + if (!inet_sk(sk)->transparent && + !ipv6_chk_addr(net, &src_info->ipi6_addr, strict ? dev : NULL, 0)) err = -EINVAL; else diff --git a/net/ipv6/ip6_flowlabel.c b/net/ipv6/ip6_flowlabel.c index f3caf1b..5430394 100644 --- a/net/ipv6/ip6_flowlabel.c +++ b/net/ipv6/ip6_flowlabel.c @@ -322,8 +322,8 @@ static int fl6_renew(struct ip6_flowlabel *fl, unsigned long linger, unsigned lo } static struct ip6_flowlabel * -fl_create(struct net *net, struct in6_flowlabel_req *freq, char __user *optval, - int optlen, int *err_p) +fl_create(struct net *net, struct sock *sk, struct in6_flowlabel_req *freq, + char __user *optval, int optlen, int *err_p) { struct ip6_flowlabel *fl = NULL; int olen; @@ -360,7 +360,7 @@ fl_create(struct net *net, struct in6_flowlabel_req *freq, char __user *optval, msg.msg_control = (void*)(fl->opt+1); memset(&flowi6, 0, sizeof(flowi6)); - err = datagram_send_ctl(net, &msg, &flowi6, fl->opt, &junk, + err = datagram_send_ctl(net, sk, &msg, &flowi6, fl->opt, &junk, &junk, &junk); if (err) goto done; @@ -528,7 +528,7 @@ int ipv6_flowlabel_opt(struct sock *sk, char __user *optval, int optlen) if (freq.flr_label & ~IPV6_FLOWLABEL_MASK) return -EINVAL; - fl = fl_create(net, &freq, optval, optlen, &err); + fl = fl_create(net, sk, &freq, optval, optlen, &err); if (fl == NULL) return err; sfl1 = kmalloc(sizeof(*sfl1), GFP_KERNEL); diff --git a/net/ipv6/ipv6_sockglue.c b/net/ipv6/ipv6_sockglue.c index 147ede38..2fbda5f 100644 --- a/net/ipv6/ipv6_sockglue.c +++ b/net/ipv6/ipv6_sockglue.c @@ -475,7 +475,7 @@ sticky_done: msg.msg_controllen = optlen; msg.msg_control = (void*)(opt+1); - retv = datagram_send_ctl(net, &msg, &fl6, opt, &junk, &junk, + retv = datagram_send_ctl(net, sk, &msg, &fl6, opt, &junk, &junk, &junk); if (retv) goto done; diff --git a/net/ipv6/netfilter/ip6_queue.c b/net/ipv6/netfilter/ip6_queue.c index 2493948..e63c397 100644 --- a/net/ipv6/netfilter/ip6_queue.c +++ b/net/ipv6/netfilter/ip6_queue.c @@ -218,6 +218,7 @@ ipq_build_packet_message(struct nf_queue_entry *entry, int *errp) return skb; nlmsg_failure: + kfree_skb(skb); *errp = -EINVAL; printk(KERN_ERR "ip6_queue: error creating packet message\n"); return NULL; @@ -313,7 +314,7 @@ ipq_set_verdict(struct ipq_verdict_msg *vmsg, unsigned int len) { struct nf_queue_entry *entry; - if (vmsg->value > NF_MAX_VERDICT) + if (vmsg->value > NF_MAX_VERDICT || vmsg->value == NF_STOLEN) return -EINVAL; entry = ipq_find_dequeue_entry(vmsg->id); @@ -358,12 +359,9 @@ ipq_receive_peer(struct ipq_peer_msg *pmsg, break; case IPQM_VERDICT: - if (pmsg->msg.verdict.value > NF_MAX_VERDICT) - status = -EINVAL; - else - status = ipq_set_verdict(&pmsg->msg.verdict, - len - sizeof(*pmsg)); - break; + status = ipq_set_verdict(&pmsg->msg.verdict, + len - sizeof(*pmsg)); + break; default: status = -EINVAL; } diff --git a/net/ipv6/raw.c b/net/ipv6/raw.c index 6a79f308..343852e 100644 --- a/net/ipv6/raw.c +++ b/net/ipv6/raw.c @@ -817,8 +817,8 @@ static int rawv6_sendmsg(struct kiocb *iocb, struct sock *sk, memset(opt, 0, sizeof(struct ipv6_txoptions)); opt->tot_len = sizeof(struct ipv6_txoptions); - err = datagram_send_ctl(sock_net(sk), msg, &fl6, opt, &hlimit, - &tclass, &dontfrag); + err = datagram_send_ctl(sock_net(sk), sk, msg, &fl6, opt, + &hlimit, &tclass, &dontfrag); if (err < 0) { fl6_sock_release(flowlabel); return err; diff --git a/net/ipv6/route.c b/net/ipv6/route.c index 9e69eb0..1250f90 100644 --- a/net/ipv6/route.c +++ b/net/ipv6/route.c @@ -104,6 +104,9 @@ static u32 *ipv6_cow_metrics(struct dst_entry *dst, unsigned long old) struct inet_peer *peer; u32 *p = NULL; + if (!(rt->dst.flags & DST_HOST)) + return NULL; + if (!rt->rt6i_peer) rt6_bind_peer(rt, 1); @@ -252,6 +255,9 @@ static void ip6_dst_destroy(struct dst_entry *dst) struct inet6_dev *idev = rt->rt6i_idev; struct inet_peer *peer = rt->rt6i_peer; + if (!(rt->dst.flags & DST_HOST)) + dst_destroy_metrics_generic(dst); + if (idev != NULL) { rt->rt6i_idev = NULL; in6_dev_put(idev); @@ -723,9 +729,7 @@ static struct rt6_info *rt6_alloc_cow(const struct rt6_info *ort, ipv6_addr_copy(&rt->rt6i_gateway, daddr); } - rt->rt6i_dst.plen = 128; rt->rt6i_flags |= RTF_CACHE; - rt->dst.flags |= DST_HOST; #ifdef CONFIG_IPV6_SUBTREES if (rt->rt6i_src.plen && saddr) { @@ -775,9 +779,7 @@ static struct rt6_info *rt6_alloc_clone(struct rt6_info *ort, struct rt6_info *rt = ip6_rt_copy(ort, daddr); if (rt) { - rt->rt6i_dst.plen = 128; rt->rt6i_flags |= RTF_CACHE; - rt->dst.flags |= DST_HOST; dst_set_neighbour(&rt->dst, neigh_clone(dst_get_neighbour_raw(&ort->dst))); } return rt; @@ -1078,12 +1080,15 @@ struct dst_entry *icmp6_dst_alloc(struct net_device *dev, neigh = NULL; } - rt->rt6i_idev = idev; + rt->dst.flags |= DST_HOST; + rt->dst.output = ip6_output; dst_set_neighbour(&rt->dst, neigh); atomic_set(&rt->dst.__refcnt, 1); - ipv6_addr_copy(&rt->rt6i_dst.addr, addr); dst_metric_set(&rt->dst, RTAX_HOPLIMIT, 255); - rt->dst.output = ip6_output; + + ipv6_addr_copy(&rt->rt6i_dst.addr, addr); + rt->rt6i_dst.plen = 128; + rt->rt6i_idev = idev; spin_lock_bh(&icmp6_dst_lock); rt->dst.next = icmp6_dst_gc_list; @@ -1261,6 +1266,14 @@ int ip6_route_add(struct fib6_config *cfg) if (rt->rt6i_dst.plen == 128) rt->dst.flags |= DST_HOST; + if (!(rt->dst.flags & DST_HOST) && cfg->fc_mx) { + u32 *metrics = kzalloc(sizeof(u32) * RTAX_MAX, GFP_KERNEL); + if (!metrics) { + err = -ENOMEM; + goto out; + } + dst_init_metrics(&rt->dst, metrics, 0); + } #ifdef CONFIG_IPV6_SUBTREES ipv6_addr_prefix(&rt->rt6i_src.addr, &cfg->fc_src, cfg->fc_src_len); rt->rt6i_src.plen = cfg->fc_src_len; @@ -1607,9 +1620,6 @@ void rt6_redirect(const struct in6_addr *dest, const struct in6_addr *src, if (on_link) nrt->rt6i_flags &= ~RTF_GATEWAY; - nrt->rt6i_dst.plen = 128; - nrt->dst.flags |= DST_HOST; - ipv6_addr_copy(&nrt->rt6i_gateway, (struct in6_addr*)neigh->primary_key); dst_set_neighbour(&nrt->dst, neigh_clone(neigh)); @@ -1754,9 +1764,10 @@ static struct rt6_info *ip6_rt_copy(const struct rt6_info *ort, if (rt) { rt->dst.input = ort->dst.input; rt->dst.output = ort->dst.output; + rt->dst.flags |= DST_HOST; ipv6_addr_copy(&rt->rt6i_dst.addr, dest); - rt->rt6i_dst.plen = ort->rt6i_dst.plen; + rt->rt6i_dst.plen = 128; dst_copy_metrics(&rt->dst, &ort->dst); rt->dst.error = ort->dst.error; rt->rt6i_idev = ort->rt6i_idev; diff --git a/net/ipv6/tcp_ipv6.c b/net/ipv6/tcp_ipv6.c index d1fb63f..3c9fa61 100644 --- a/net/ipv6/tcp_ipv6.c +++ b/net/ipv6/tcp_ipv6.c @@ -531,20 +531,6 @@ static int tcp_v6_rtx_synack(struct sock *sk, struct request_sock *req, return tcp_v6_send_synack(sk, req, rvp); } -static inline void syn_flood_warning(struct sk_buff *skb) -{ -#ifdef CONFIG_SYN_COOKIES - if (sysctl_tcp_syncookies) - printk(KERN_INFO - "TCPv6: Possible SYN flooding on port %d. " - "Sending cookies.\n", ntohs(tcp_hdr(skb)->dest)); - else -#endif - printk(KERN_INFO - "TCPv6: Possible SYN flooding on port %d. " - "Dropping request.\n", ntohs(tcp_hdr(skb)->dest)); -} - static void tcp_v6_reqsk_destructor(struct request_sock *req) { kfree_skb(inet6_rsk(req)->pktopts); @@ -1179,11 +1165,7 @@ static int tcp_v6_conn_request(struct sock *sk, struct sk_buff *skb) struct tcp_sock *tp = tcp_sk(sk); __u32 isn = TCP_SKB_CB(skb)->when; struct dst_entry *dst = NULL; -#ifdef CONFIG_SYN_COOKIES int want_cookie = 0; -#else -#define want_cookie 0 -#endif if (skb->protocol == htons(ETH_P_IP)) return tcp_v4_conn_request(sk, skb); @@ -1192,14 +1174,9 @@ static int tcp_v6_conn_request(struct sock *sk, struct sk_buff *skb) goto drop; if (inet_csk_reqsk_queue_is_full(sk) && !isn) { - if (net_ratelimit()) - syn_flood_warning(skb); -#ifdef CONFIG_SYN_COOKIES - if (sysctl_tcp_syncookies) - want_cookie = 1; - else -#endif - goto drop; + want_cookie = tcp_syn_flood_action(sk, skb, "TCPv6"); + if (!want_cookie) + goto drop; } if (sk_acceptq_is_full(sk) && inet_csk_reqsk_queue_young(sk) > 1) @@ -1249,9 +1226,7 @@ static int tcp_v6_conn_request(struct sock *sk, struct sk_buff *skb) while (l-- > 0) *c++ ^= *hash_location++; -#ifdef CONFIG_SYN_COOKIES want_cookie = 0; /* not our kind of cookie */ -#endif tmp_ext.cookie_out_never = 0; /* false */ tmp_ext.cookie_plus = tmp_opt.cookie_plus; } else if (!tp->rx_opt.cookie_in_always) { diff --git a/net/ipv6/udp.c b/net/ipv6/udp.c index 29213b5..bb95e8e 100644 --- a/net/ipv6/udp.c +++ b/net/ipv6/udp.c @@ -1090,8 +1090,8 @@ do_udp_sendmsg: memset(opt, 0, sizeof(struct ipv6_txoptions)); opt->tot_len = sizeof(*opt); - err = datagram_send_ctl(sock_net(sk), msg, &fl6, opt, &hlimit, - &tclass, &dontfrag); + err = datagram_send_ctl(sock_net(sk), sk, msg, &fl6, opt, + &hlimit, &tclass, &dontfrag); if (err < 0) { fl6_sock_release(flowlabel); return err; diff --git a/net/irda/irsysctl.c b/net/irda/irsysctl.c index d0b70da..2615ffc 100644 --- a/net/irda/irsysctl.c +++ b/net/irda/irsysctl.c @@ -40,9 +40,9 @@ extern int sysctl_slot_timeout; extern int sysctl_fast_poll_increase; extern char sysctl_devname[]; extern int sysctl_max_baud_rate; -extern int sysctl_min_tx_turn_time; -extern int sysctl_max_tx_data_size; -extern int sysctl_max_tx_window; +extern unsigned int sysctl_min_tx_turn_time; +extern unsigned int sysctl_max_tx_data_size; +extern unsigned int sysctl_max_tx_window; extern int sysctl_max_noreply_time; extern int sysctl_warn_noreply_time; extern int sysctl_lap_keepalive_time; diff --git a/net/irda/qos.c b/net/irda/qos.c index 1b51bcf..4369f7f 100644 --- a/net/irda/qos.c +++ b/net/irda/qos.c @@ -60,7 +60,7 @@ int sysctl_max_noreply_time = 12; * Default is 10us which means using the unmodified value given by the * peer except if it's 0 (0 is likely a bug in the other stack). */ -unsigned sysctl_min_tx_turn_time = 10; +unsigned int sysctl_min_tx_turn_time = 10; /* * Maximum data size to be used in transmission in payload of LAP frame. * There is a bit of confusion in the IrDA spec : @@ -75,13 +75,13 @@ unsigned sysctl_min_tx_turn_time = 10; * bytes frames or all negotiated frame sizes, but you can use the sysctl * to play with this value anyway. * Jean II */ -unsigned sysctl_max_tx_data_size = 2042; +unsigned int sysctl_max_tx_data_size = 2042; /* * Maximum transmit window, i.e. number of LAP frames between turn-around. * This allow to override what the peer told us. Some peers are buggy and * don't always support what they tell us. * Jean II */ -unsigned sysctl_max_tx_window = 7; +unsigned int sysctl_max_tx_window = 7; static int irlap_param_baud_rate(void *instance, irda_param_t *param, int get); static int irlap_param_link_disconnect(void *instance, irda_param_t *parm, diff --git a/net/mac80211/sta_info.c b/net/mac80211/sta_info.c index 3db78b6..21070e9 100644 --- a/net/mac80211/sta_info.c +++ b/net/mac80211/sta_info.c @@ -665,7 +665,7 @@ static int __must_check __sta_info_destroy(struct sta_info *sta) BUG_ON(!sdata->bss); atomic_dec(&sdata->bss->num_sta_ps); - __sta_info_clear_tim_bit(sdata->bss, sta); + sta_info_clear_tim_bit(sta); } local->num_sta--; diff --git a/net/netfilter/nf_conntrack_pptp.c b/net/netfilter/nf_conntrack_pptp.c index 2fd4565..31d56b2 100644 --- a/net/netfilter/nf_conntrack_pptp.c +++ b/net/netfilter/nf_conntrack_pptp.c @@ -364,6 +364,7 @@ pptp_inbound_pkt(struct sk_buff *skb, break; case PPTP_WAN_ERROR_NOTIFY: + case PPTP_SET_LINK_INFO: case PPTP_ECHO_REQUEST: case PPTP_ECHO_REPLY: /* I don't have to explain these ;) */ diff --git a/net/netfilter/nf_conntrack_proto_tcp.c b/net/netfilter/nf_conntrack_proto_tcp.c index 37bf943..8235b86 100644 --- a/net/netfilter/nf_conntrack_proto_tcp.c +++ b/net/netfilter/nf_conntrack_proto_tcp.c @@ -409,7 +409,7 @@ static void tcp_options(const struct sk_buff *skb, if (opsize < 2) /* "silly options" */ return; if (opsize > length) - break; /* don't parse partial options */ + return; /* don't parse partial options */ if (opcode == TCPOPT_SACK_PERM && opsize == TCPOLEN_SACK_PERM) @@ -447,7 +447,7 @@ static void tcp_sack(const struct sk_buff *skb, unsigned int dataoff, BUG_ON(ptr == NULL); /* Fast path for timestamp-only option */ - if (length == TCPOLEN_TSTAMP_ALIGNED*4 + if (length == TCPOLEN_TSTAMP_ALIGNED && *(__be32 *)ptr == htonl((TCPOPT_NOP << 24) | (TCPOPT_NOP << 16) | (TCPOPT_TIMESTAMP << 8) @@ -469,7 +469,7 @@ static void tcp_sack(const struct sk_buff *skb, unsigned int dataoff, if (opsize < 2) /* "silly options" */ return; if (opsize > length) - break; /* don't parse partial options */ + return; /* don't parse partial options */ if (opcode == TCPOPT_SACK && opsize >= (TCPOLEN_SACK_BASE diff --git a/net/netfilter/nfnetlink_queue.c b/net/netfilter/nfnetlink_queue.c index 00bd475..a80b0cb 100644 --- a/net/netfilter/nfnetlink_queue.c +++ b/net/netfilter/nfnetlink_queue.c @@ -646,8 +646,8 @@ verdicthdr_get(const struct nlattr * const nfqa[]) return NULL; vhdr = nla_data(nfqa[NFQA_VERDICT_HDR]); - verdict = ntohl(vhdr->verdict); - if ((verdict & NF_VERDICT_MASK) > NF_MAX_VERDICT) + verdict = ntohl(vhdr->verdict) & NF_VERDICT_MASK; + if (verdict > NF_MAX_VERDICT || verdict == NF_STOLEN) return NULL; return vhdr; } diff --git a/net/netfilter/xt_rateest.c b/net/netfilter/xt_rateest.c index 76a0831..ed0db15 100644 --- a/net/netfilter/xt_rateest.c +++ b/net/netfilter/xt_rateest.c @@ -78,7 +78,7 @@ static int xt_rateest_mt_checkentry(const struct xt_mtchk_param *par) { struct xt_rateest_match_info *info = par->matchinfo; struct xt_rateest *est1, *est2; - int ret = false; + int ret = -EINVAL; if (hweight32(info->flags & (XT_RATEEST_MATCH_ABS | XT_RATEEST_MATCH_REL)) != 1) @@ -101,13 +101,12 @@ static int xt_rateest_mt_checkentry(const struct xt_mtchk_param *par) if (!est1) goto err1; + est2 = NULL; if (info->flags & XT_RATEEST_MATCH_REL) { est2 = xt_rateest_lookup(info->name2); if (!est2) goto err2; - } else - est2 = NULL; - + } info->est1 = est1; info->est2 = est2; @@ -116,7 +115,7 @@ static int xt_rateest_mt_checkentry(const struct xt_mtchk_param *par) err2: xt_rateest_put(est1); err1: - return -EINVAL; + return ret; } static void xt_rateest_mt_destroy(const struct xt_mtdtor_param *par) diff --git a/net/sched/cls_rsvp.h b/net/sched/cls_rsvp.h index be4505e..b014279 100644 --- a/net/sched/cls_rsvp.h +++ b/net/sched/cls_rsvp.h @@ -425,7 +425,7 @@ static int rsvp_change(struct tcf_proto *tp, unsigned long base, struct rsvp_filter *f, **fp; struct rsvp_session *s, **sp; struct tc_rsvp_pinfo *pinfo = NULL; - struct nlattr *opt = tca[TCA_OPTIONS-1]; + struct nlattr *opt = tca[TCA_OPTIONS]; struct nlattr *tb[TCA_RSVP_MAX + 1]; struct tcf_exts e; unsigned int h1, h2; @@ -439,7 +439,7 @@ static int rsvp_change(struct tcf_proto *tp, unsigned long base, if (err < 0) return err; - err = tcf_exts_validate(tp, tb, tca[TCA_RATE-1], &e, &rsvp_ext_map); + err = tcf_exts_validate(tp, tb, tca[TCA_RATE], &e, &rsvp_ext_map); if (err < 0) return err; @@ -449,8 +449,8 @@ static int rsvp_change(struct tcf_proto *tp, unsigned long base, if (f->handle != handle && handle) goto errout2; - if (tb[TCA_RSVP_CLASSID-1]) { - f->res.classid = nla_get_u32(tb[TCA_RSVP_CLASSID-1]); + if (tb[TCA_RSVP_CLASSID]) { + f->res.classid = nla_get_u32(tb[TCA_RSVP_CLASSID]); tcf_bind_filter(tp, &f->res, base); } @@ -462,7 +462,7 @@ static int rsvp_change(struct tcf_proto *tp, unsigned long base, err = -EINVAL; if (handle) goto errout2; - if (tb[TCA_RSVP_DST-1] == NULL) + if (tb[TCA_RSVP_DST] == NULL) goto errout2; err = -ENOBUFS; @@ -471,19 +471,19 @@ static int rsvp_change(struct tcf_proto *tp, unsigned long base, goto errout2; h2 = 16; - if (tb[TCA_RSVP_SRC-1]) { - memcpy(f->src, nla_data(tb[TCA_RSVP_SRC-1]), sizeof(f->src)); + if (tb[TCA_RSVP_SRC]) { + memcpy(f->src, nla_data(tb[TCA_RSVP_SRC]), sizeof(f->src)); h2 = hash_src(f->src); } - if (tb[TCA_RSVP_PINFO-1]) { - pinfo = nla_data(tb[TCA_RSVP_PINFO-1]); + if (tb[TCA_RSVP_PINFO]) { + pinfo = nla_data(tb[TCA_RSVP_PINFO]); f->spi = pinfo->spi; f->tunnelhdr = pinfo->tunnelhdr; } - if (tb[TCA_RSVP_CLASSID-1]) - f->res.classid = nla_get_u32(tb[TCA_RSVP_CLASSID-1]); + if (tb[TCA_RSVP_CLASSID]) + f->res.classid = nla_get_u32(tb[TCA_RSVP_CLASSID]); - dst = nla_data(tb[TCA_RSVP_DST-1]); + dst = nla_data(tb[TCA_RSVP_DST]); h1 = hash_dst(dst, pinfo ? pinfo->protocol : 0, pinfo ? pinfo->tunnelid : 0); err = -ENOMEM; @@ -642,8 +642,7 @@ nla_put_failure: return -1; } -static struct tcf_proto_ops RSVP_OPS = { - .next = NULL, +static struct tcf_proto_ops RSVP_OPS __read_mostly = { .kind = RSVP_ID, .classify = rsvp_classify, .init = rsvp_init, diff --git a/net/sctp/sm_sideeffect.c b/net/sctp/sm_sideeffect.c index 167c880..76388b0 100644 --- a/net/sctp/sm_sideeffect.c +++ b/net/sctp/sm_sideeffect.c @@ -1689,6 +1689,11 @@ static int sctp_cmd_interpreter(sctp_event_t event_type, case SCTP_CMD_PURGE_ASCONF_QUEUE: sctp_asconf_queue_teardown(asoc); break; + + case SCTP_CMD_SET_ASOC: + asoc = cmd->obj.asoc; + break; + default: pr_warn("Impossible command: %u, %p\n", cmd->verb, cmd->obj.ptr); diff --git a/net/sctp/sm_statefuns.c b/net/sctp/sm_statefuns.c index 49b847b..a0f31e6 100644 --- a/net/sctp/sm_statefuns.c +++ b/net/sctp/sm_statefuns.c @@ -2047,6 +2047,12 @@ sctp_disposition_t sctp_sf_do_5_2_4_dupcook(const struct sctp_endpoint *ep, sctp_add_cmd_sf(commands, SCTP_CMD_NEW_ASOC, SCTP_ASOC(new_asoc)); sctp_add_cmd_sf(commands, SCTP_CMD_DELETE_TCB, SCTP_NULL()); + /* Restore association pointer to provide SCTP command interpeter + * with a valid context in case it needs to manipulate + * the queues */ + sctp_add_cmd_sf(commands, SCTP_CMD_SET_ASOC, + SCTP_ASOC((struct sctp_association *)asoc)); + return retval; nomem: diff --git a/net/wireless/reg.c b/net/wireless/reg.c index 02751db..68a471b 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -852,6 +852,7 @@ static void handle_channel(struct wiphy *wiphy, return; } + chan->beacon_found = false; chan->flags = flags | bw_flags | map_regdom_flags(reg_rule->flags); chan->max_antenna_gain = min(chan->orig_mag, (int) MBI_TO_DBI(power_rule->max_antenna_gain)); diff --git a/net/wireless/sme.c b/net/wireless/sme.c index b7b6ff8..dec0fa2 100644 --- a/net/wireless/sme.c +++ b/net/wireless/sme.c @@ -118,6 +118,8 @@ static int cfg80211_conn_scan(struct wireless_dev *wdev) i++, j++) request->channels[i] = &wdev->wiphy->bands[band]->channels[j]; + request->rates[band] = + (1 << wdev->wiphy->bands[band]->n_bitrates) - 1; } } request->n_channels = n_channels; diff --git a/net/xfrm/xfrm_input.c b/net/xfrm/xfrm_input.c index a026b0e..54a0dc2e 100644 --- a/net/xfrm/xfrm_input.c +++ b/net/xfrm/xfrm_input.c @@ -212,6 +212,11 @@ resume: /* only the first xfrm gets the encap type */ encap_type = 0; + if (async && x->repl->check(x, skb, seq)) { + XFRM_INC_STATS(net, LINUX_MIB_XFRMINSTATESEQERROR); + goto drop_unlock; + } + x->repl->advance(x, seq); x->curlft.bytes += skb->len; diff --git a/sound/core/pcm_lib.c b/sound/core/pcm_lib.c index 86d0caf..62e90b8 100644 --- a/sound/core/pcm_lib.c +++ b/sound/core/pcm_lib.c @@ -1761,6 +1761,10 @@ static int wait_for_avail(struct snd_pcm_substream *substream, snd_pcm_uframes_t avail = 0; long wait_time, tout; + init_waitqueue_entry(&wait, current); + set_current_state(TASK_INTERRUPTIBLE); + add_wait_queue(&runtime->tsleep, &wait); + if (runtime->no_period_wakeup) wait_time = MAX_SCHEDULE_TIMEOUT; else { @@ -1771,16 +1775,32 @@ static int wait_for_avail(struct snd_pcm_substream *substream, } wait_time = msecs_to_jiffies(wait_time * 1000); } - init_waitqueue_entry(&wait, current); - add_wait_queue(&runtime->tsleep, &wait); + for (;;) { if (signal_pending(current)) { err = -ERESTARTSYS; break; } + + /* + * We need to check if space became available already + * (and thus the wakeup happened already) first to close + * the race of space already having become available. + * This check must happen after been added to the waitqueue + * and having current state be INTERRUPTIBLE. + */ + if (is_playback) + avail = snd_pcm_playback_avail(runtime); + else + avail = snd_pcm_capture_avail(runtime); + if (avail >= runtime->twake) + break; snd_pcm_stream_unlock_irq(substream); - tout = schedule_timeout_interruptible(wait_time); + + tout = schedule_timeout(wait_time); + snd_pcm_stream_lock_irq(substream); + set_current_state(TASK_INTERRUPTIBLE); switch (runtime->status->state) { case SNDRV_PCM_STATE_SUSPENDED: err = -ESTRPIPE; @@ -1806,14 +1826,9 @@ static int wait_for_avail(struct snd_pcm_substream *substream, err = -EIO; break; } - if (is_playback) - avail = snd_pcm_playback_avail(runtime); - else - avail = snd_pcm_capture_avail(runtime); - if (avail >= runtime->twake) - break; } _endloop: + set_current_state(TASK_RUNNING); remove_wait_queue(&runtime->tsleep, &wait); *availp = avail; return err; diff --git a/sound/pci/fm801.c b/sound/pci/fm801.c index f9123f0..32b02d9 100644 --- a/sound/pci/fm801.c +++ b/sound/pci/fm801.c @@ -68,6 +68,7 @@ MODULE_PARM_DESC(enable, "Enable FM801 soundcard."); module_param_array(tea575x_tuner, int, NULL, 0444); MODULE_PARM_DESC(tea575x_tuner, "TEA575x tuner access method (0 = auto, 1 = SF256-PCS, 2=SF256-PCP, 3=SF64-PCR, 8=disable, +16=tuner-only)."); +#define TUNER_DISABLED (1<<3) #define TUNER_ONLY (1<<4) #define TUNER_TYPE_MASK (~TUNER_ONLY & 0xFFFF) @@ -1150,7 +1151,8 @@ static int snd_fm801_free(struct fm801 *chip) __end_hw: #ifdef CONFIG_SND_FM801_TEA575X_BOOL - snd_tea575x_exit(&chip->tea); + if (!(chip->tea575x_tuner & TUNER_DISABLED)) + snd_tea575x_exit(&chip->tea); #endif if (chip->irq >= 0) free_irq(chip->irq, chip); @@ -1236,7 +1238,6 @@ static int __devinit snd_fm801_create(struct snd_card *card, (tea575x_tuner & TUNER_TYPE_MASK) < 4) { if (snd_tea575x_init(&chip->tea)) { snd_printk(KERN_ERR "TEA575x radio not found\n"); - snd_fm801_free(chip); return -ENODEV; } } else if ((tea575x_tuner & TUNER_TYPE_MASK) == 0) { @@ -1251,11 +1252,15 @@ static int __devinit snd_fm801_create(struct snd_card *card, } if (tea575x_tuner == 4) { snd_printk(KERN_ERR "TEA575x radio not found\n"); - snd_fm801_free(chip); - return -ENODEV; + chip->tea575x_tuner = TUNER_DISABLED; } } - strlcpy(chip->tea.card, snd_fm801_tea575x_gpios[(tea575x_tuner & TUNER_TYPE_MASK) - 1].name, sizeof(chip->tea.card)); + if (!(chip->tea575x_tuner & TUNER_DISABLED)) { + strlcpy(chip->tea.card, + snd_fm801_tea575x_gpios[(tea575x_tuner & + TUNER_TYPE_MASK) - 1].name, + sizeof(chip->tea.card)); + } #endif *rchip = chip; diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c index 3e7850c..f3aefef 100644 --- a/sound/pci/hda/hda_codec.c +++ b/sound/pci/hda/hda_codec.c @@ -579,9 +579,13 @@ int snd_hda_get_conn_index(struct hda_codec *codec, hda_nid_t mux, return -1; } recursive++; - for (i = 0; i < nums; i++) + for (i = 0; i < nums; i++) { + unsigned int type = get_wcaps_type(get_wcaps(codec, conn[i])); + if (type == AC_WID_PIN || type == AC_WID_AUD_OUT) + continue; if (snd_hda_get_conn_index(codec, conn[i], nid, recursive) >= 0) return i; + } return -1; } EXPORT_SYMBOL_HDA(snd_hda_get_conn_index); diff --git a/sound/pci/hda/patch_cirrus.c b/sound/pci/hda/patch_cirrus.c index d6c93d9..c45f3e6 100644 --- a/sound/pci/hda/patch_cirrus.c +++ b/sound/pci/hda/patch_cirrus.c @@ -535,7 +535,7 @@ static int add_volume(struct hda_codec *codec, const char *name, int index, unsigned int pval, int dir, struct snd_kcontrol **kctlp) { - char tmp[32]; + char tmp[44]; struct snd_kcontrol_new knew = HDA_CODEC_VOLUME_IDX(tmp, index, 0, 0, HDA_OUTPUT); knew.private_value = pval; diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 7cabd73..7a73621 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -168,7 +168,7 @@ struct alc_spec { unsigned int auto_mic_valid_imux:1; /* valid imux for auto-mic */ unsigned int automute:1; /* HP automute enabled */ unsigned int detect_line:1; /* Line-out detection enabled */ - unsigned int automute_lines:1; /* automute line-out as well */ + unsigned int automute_lines:1; /* automute line-out as well; NOP when automute_hp_lo isn't set */ unsigned int automute_hp_lo:1; /* both HP and LO available */ /* other flags */ @@ -551,7 +551,7 @@ static void update_speakers(struct hda_codec *codec) if (spec->autocfg.line_out_pins[0] == spec->autocfg.hp_pins[0] || spec->autocfg.line_out_pins[0] == spec->autocfg.speaker_pins[0]) return; - if (!spec->automute_lines || !spec->automute) + if (!spec->automute || (spec->automute_hp_lo && !spec->automute_lines)) on = 0; else on = spec->jack_present; @@ -578,6 +578,10 @@ static void alc_line_automute(struct hda_codec *codec) { struct alc_spec *spec = codec->spec; + /* check LO jack only when it's different from HP */ + if (spec->autocfg.line_out_pins[0] == spec->autocfg.hp_pins[0]) + return; + spec->line_jack_present = detect_jacks(codec, ARRAY_SIZE(spec->autocfg.line_out_pins), spec->autocfg.line_out_pins); @@ -803,7 +807,7 @@ static int alc_automute_mode_get(struct snd_kcontrol *kcontrol, unsigned int val; if (!spec->automute) val = 0; - else if (!spec->automute_lines) + else if (!spec->automute_hp_lo || !spec->automute_lines) val = 1; else val = 2; @@ -824,7 +828,8 @@ static int alc_automute_mode_put(struct snd_kcontrol *kcontrol, spec->automute = 0; break; case 1: - if (spec->automute && !spec->automute_lines) + if (spec->automute && + (!spec->automute_hp_lo || !spec->automute_lines)) return 0; spec->automute = 1; spec->automute_lines = 0; @@ -1320,7 +1325,9 @@ do_sku: * 15 : 1 --> enable the function "Mute internal speaker * when the external headphone out jack is plugged" */ - if (!spec->autocfg.hp_pins[0]) { + if (!spec->autocfg.hp_pins[0] && + !(spec->autocfg.line_out_pins[0] && + spec->autocfg.line_out_type == AUTO_PIN_HP_OUT)) { hda_nid_t nid; tmp = (ass >> 11) & 0x3; /* HP to chassis */ if (tmp == 0) diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index 5145b66..987e3cf 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -5630,6 +5630,7 @@ again: switch (codec->vendor_id) { case 0x111d76d1: case 0x111d76d9: + case 0x111d76df: case 0x111d76e5: case 0x111d7666: case 0x111d7667: @@ -6573,6 +6574,7 @@ static const struct hda_codec_preset snd_hda_preset_sigmatel[] = { { .id = 0x111d76cc, .name = "92HD89F3", .patch = patch_stac92hd73xx }, { .id = 0x111d76cd, .name = "92HD89F2", .patch = patch_stac92hd73xx }, { .id = 0x111d76ce, .name = "92HD89F1", .patch = patch_stac92hd73xx }, + { .id = 0x111d76df, .name = "92HD93BXX", .patch = patch_stac92hd83xxx}, { .id = 0x111d76e0, .name = "92HD91BXX", .patch = patch_stac92hd83xxx}, { .id = 0x111d76e3, .name = "92HD98BXX", .patch = patch_stac92hd83xxx}, { .id = 0x111d76e5, .name = "92HD99BXX", .patch = patch_stac92hd83xxx}, diff --git a/sound/soc/blackfin/bf5xx-ad193x.c b/sound/soc/blackfin/bf5xx-ad193x.c index a118a0f..5956584 100644 --- a/sound/soc/blackfin/bf5xx-ad193x.c +++ b/sound/soc/blackfin/bf5xx-ad193x.c @@ -103,7 +103,7 @@ static struct snd_soc_dai_link bf5xx_ad193x_dai[] = { .cpu_dai_name = "bfin-tdm.0", .codec_dai_name ="ad193x-hifi", .platform_name = "bfin-tdm-pcm-audio", - .codec_name = "ad193x.5", + .codec_name = "spi0.5", .ops = &bf5xx_ad193x_ops, }, { @@ -112,7 +112,7 @@ static struct snd_soc_dai_link bf5xx_ad193x_dai[] = { .cpu_dai_name = "bfin-tdm.1", .codec_dai_name ="ad193x-hifi", .platform_name = "bfin-tdm-pcm-audio", - .codec_name = "ad193x.5", + .codec_name = "spi0.5", .ops = &bf5xx_ad193x_ops, }, }; diff --git a/sound/soc/blackfin/bf5xx-ad73311.c b/sound/soc/blackfin/bf5xx-ad73311.c index 732a247..b94eb7e 100644 --- a/sound/soc/blackfin/bf5xx-ad73311.c +++ b/sound/soc/blackfin/bf5xx-ad73311.c @@ -128,7 +128,7 @@ static int snd_ad73311_configure(void) return 0; } -static int bf5xx_probe(struct platform_device *pdev) +static int bf5xx_probe(struct snd_soc_card *card) { int err; if (gpio_request(GPIO_SE, "AD73311_SE")) { diff --git a/sound/soc/codecs/ssm2602.c b/sound/soc/codecs/ssm2602.c index 84f4ad5..9801cd7 100644 --- a/sound/soc/codecs/ssm2602.c +++ b/sound/soc/codecs/ssm2602.c @@ -431,7 +431,8 @@ static int ssm2602_set_dai_fmt(struct snd_soc_dai *codec_dai, static int ssm2602_set_bias_level(struct snd_soc_codec *codec, enum snd_soc_bias_level level) { - u16 reg = snd_soc_read(codec, SSM2602_PWR) & 0xff7f; + u16 reg = snd_soc_read(codec, SSM2602_PWR); + reg &= ~(PWR_POWER_OFF | PWR_OSC_PDN); switch (level) { case SND_SOC_BIAS_ON: diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c index 1725550..d2c315f 100644 --- a/sound/soc/codecs/wm8962.c +++ b/sound/soc/codecs/wm8962.c @@ -3479,31 +3479,6 @@ int wm8962_mic_detect(struct snd_soc_codec *codec, struct snd_soc_jack *jack) } EXPORT_SYMBOL_GPL(wm8962_mic_detect); -#ifdef CONFIG_PM -static int wm8962_resume(struct snd_soc_codec *codec) -{ - u16 *reg_cache = codec->reg_cache; - int i; - - /* Restore the registers */ - for (i = 1; i < codec->driver->reg_cache_size; i++) { - switch (i) { - case WM8962_SOFTWARE_RESET: - continue; - default: - break; - } - - if (reg_cache[i] != wm8962_reg[i]) - snd_soc_write(codec, i, reg_cache[i]); - } - - return 0; -} -#else -#define wm8962_resume NULL -#endif - #if defined(CONFIG_INPUT) || defined(CONFIG_INPUT_MODULE) static int beep_rates[] = { 500, 1000, 2000, 4000, @@ -4015,7 +3990,6 @@ static int wm8962_remove(struct snd_soc_codec *codec) static struct snd_soc_codec_driver soc_codec_dev_wm8962 = { .probe = wm8962_probe, .remove = wm8962_remove, - .resume = wm8962_resume, .set_bias_level = wm8962_set_bias_level, .reg_cache_size = WM8962_MAX_REGISTER + 1, .reg_word_size = sizeof(u16), diff --git a/sound/soc/fsl/mpc5200_dma.c b/sound/soc/fsl/mpc5200_dma.c index fd0dc46..5c6c245 100644 --- a/sound/soc/fsl/mpc5200_dma.c +++ b/sound/soc/fsl/mpc5200_dma.c @@ -369,7 +369,7 @@ static struct snd_soc_platform_driver mpc5200_audio_dma_platform = { .pcm_free = &psc_dma_free, }; -static int mpc5200_hpcd_probe(struct of_device *op) +static int mpc5200_hpcd_probe(struct platform_device *op) { phys_addr_t fifo; struct psc_dma *psc_dma; @@ -487,7 +487,7 @@ out_unmap: return ret; } -static int mpc5200_hpcd_remove(struct of_device *op) +static int mpc5200_hpcd_remove(struct platform_device *op) { struct psc_dma *psc_dma = dev_get_drvdata(&op->dev); @@ -519,7 +519,7 @@ MODULE_DEVICE_TABLE(of, mpc5200_hpcd_match); static struct platform_driver mpc5200_hpcd_of_driver = { .probe = mpc5200_hpcd_probe, .remove = mpc5200_hpcd_remove, - .dev = { + .driver = { .owner = THIS_MODULE, .name = "mpc5200-pcm-audio", .of_match_table = mpc5200_hpcd_match, diff --git a/sound/soc/imx/imx-pcm-fiq.c b/sound/soc/imx/imx-pcm-fiq.c index 309c59e..7945625 100644 --- a/sound/soc/imx/imx-pcm-fiq.c +++ b/sound/soc/imx/imx-pcm-fiq.c @@ -240,7 +240,6 @@ static int ssi_irq = 0; static int imx_pcm_fiq_new(struct snd_soc_pcm_runtime *rtd) { - struct snd_card *card = rtd->card->snd_card; struct snd_soc_dai *dai = rtd->cpu_dai; struct snd_pcm *pcm = rtd->pcm; int ret; diff --git a/sound/soc/kirkwood/kirkwood-i2s.c b/sound/soc/kirkwood/kirkwood-i2s.c index 8f16cd3..d0bcf3f 100644 --- a/sound/soc/kirkwood/kirkwood-i2s.c +++ b/sound/soc/kirkwood/kirkwood-i2s.c @@ -424,7 +424,7 @@ static __devinit int kirkwood_i2s_dev_probe(struct platform_device *pdev) if (!priv->mem) { dev_err(&pdev->dev, "request_mem_region failed\n"); err = -EBUSY; - goto error_alloc; + goto err_alloc; } priv->io = ioremap(priv->mem->start, SZ_16K); diff --git a/sound/soc/omap/omap-mcbsp.c b/sound/soc/omap/omap-mcbsp.c index ebcc2d4..478d607 100644 --- a/sound/soc/omap/omap-mcbsp.c +++ b/sound/soc/omap/omap-mcbsp.c @@ -516,6 +516,12 @@ static int omap_mcbsp_dai_set_dai_sysclk(struct snd_soc_dai *cpu_dai, struct omap_mcbsp_reg_cfg *regs = &mcbsp_data->regs; int err = 0; + if (mcbsp_data->active) + if (freq == mcbsp_data->in_freq) + return 0; + else + return -EBUSY; + /* The McBSP signal muxing functions are only available on McBSP1 */ if (clk_id == OMAP_MCBSP_CLKR_SRC_CLKR || clk_id == OMAP_MCBSP_CLKR_SRC_CLKX || diff --git a/sound/soc/samsung/ac97.c b/sound/soc/samsung/ac97.c index f97110e..b4f9b00 100644 --- a/sound/soc/samsung/ac97.c +++ b/sound/soc/samsung/ac97.c @@ -271,7 +271,10 @@ static int s3c_ac97_trigger(struct snd_pcm_substream *substream, int cmd, writel(ac_glbctrl, s3c_ac97.regs + S3C_AC97_GLBCTRL); - s3c2410_dma_ctrl(dma_data->channel, S3C2410_DMAOP_STARTED); + if (!dma_data->ops) + dma_data->ops = samsung_dma_get_ops(); + + dma_data->ops->started(dma_data->channel); return 0; } @@ -317,7 +320,10 @@ static int s3c_ac97_mic_trigger(struct snd_pcm_substream *substream, writel(ac_glbctrl, s3c_ac97.regs + S3C_AC97_GLBCTRL); - s3c2410_dma_ctrl(dma_data->channel, S3C2410_DMAOP_STARTED); + if (!dma_data->ops) + dma_data->ops = samsung_dma_get_ops(); + + dma_data->ops->started(dma_data->channel); return 0; } diff --git a/sound/soc/samsung/dma.c b/sound/soc/samsung/dma.c index 9465588..2d622b6 100644 --- a/sound/soc/samsung/dma.c +++ b/sound/soc/samsung/dma.c @@ -54,7 +54,6 @@ struct runtime_data { spinlock_t lock; int state; unsigned int dma_loaded; - unsigned int dma_limit; unsigned int dma_period; dma_addr_t dma_start; dma_addr_t dma_pos; @@ -62,77 +61,79 @@ struct runtime_data { struct s3c_dma_params *params; }; +static void audio_buffdone(void *data); + /* dma_enqueue * * place a dma buffer onto the queue for the dma system * to handle. -*/ + */ static void dma_enqueue(struct snd_pcm_substream *substream) { struct runtime_data *prtd = substream->runtime->private_data; dma_addr_t pos = prtd->dma_pos; unsigned int limit; - int ret; + struct samsung_dma_prep_info dma_info; pr_debug("Entered %s\n", __func__); - if (s3c_dma_has_circular()) - limit = (prtd->dma_end - prtd->dma_start) / prtd->dma_period; - else - limit = prtd->dma_limit; + limit = (prtd->dma_end - prtd->dma_start) / prtd->dma_period; pr_debug("%s: loaded %d, limit %d\n", __func__, prtd->dma_loaded, limit); - while (prtd->dma_loaded < limit) { - unsigned long len = prtd->dma_period; + dma_info.cap = (samsung_dma_has_circular() ? DMA_CYCLIC : DMA_SLAVE); + dma_info.direction = + (substream->stream == SNDRV_PCM_STREAM_PLAYBACK + ? DMA_TO_DEVICE : DMA_FROM_DEVICE); + dma_info.fp = audio_buffdone; + dma_info.fp_param = substream; + dma_info.period = prtd->dma_period; + dma_info.len = prtd->dma_period*limit; + while (prtd->dma_loaded < limit) { pr_debug("dma_loaded: %d\n", prtd->dma_loaded); - if ((pos + len) > prtd->dma_end) { - len = prtd->dma_end - pos; - pr_debug("%s: corrected dma len %ld\n", __func__, len); + if ((pos + dma_info.period) > prtd->dma_end) { + dma_info.period = prtd->dma_end - pos; + pr_debug("%s: corrected dma len %ld\n", + __func__, dma_info.period); } - ret = s3c2410_dma_enqueue(prtd->params->channel, - substream, pos, len); + dma_info.buf = pos; + prtd->params->ops->prepare(prtd->params->ch, &dma_info); - if (ret == 0) { - prtd->dma_loaded++; - pos += prtd->dma_period; - if (pos >= prtd->dma_end) - pos = prtd->dma_start; - } else - break; + prtd->dma_loaded++; + pos += prtd->dma_period; + if (pos >= prtd->dma_end) + pos = prtd->dma_start; } prtd->dma_pos = pos; } -static void audio_buffdone(struct s3c2410_dma_chan *channel, - void *dev_id, int size, - enum s3c2410_dma_buffresult result) +static void audio_buffdone(void *data) { - struct snd_pcm_substream *substream = dev_id; - struct runtime_data *prtd; + struct snd_pcm_substream *substream = data; + struct runtime_data *prtd = substream->runtime->private_data; pr_debug("Entered %s\n", __func__); - if (result == S3C2410_RES_ABORT || result == S3C2410_RES_ERR) - return; - - prtd = substream->runtime->private_data; + if (prtd->state & ST_RUNNING) { + prtd->dma_pos += prtd->dma_period; + if (prtd->dma_pos >= prtd->dma_end) + prtd->dma_pos = prtd->dma_start; - if (substream) - snd_pcm_period_elapsed(substream); + if (substream) + snd_pcm_period_elapsed(substream); - spin_lock(&prtd->lock); - if (prtd->state & ST_RUNNING && !s3c_dma_has_circular()) { - prtd->dma_loaded--; - dma_enqueue(substream); + spin_lock(&prtd->lock); + if (!samsung_dma_has_circular()) { + prtd->dma_loaded--; + dma_enqueue(substream); + } + spin_unlock(&prtd->lock); } - - spin_unlock(&prtd->lock); } static int dma_hw_params(struct snd_pcm_substream *substream, @@ -144,8 +145,7 @@ static int dma_hw_params(struct snd_pcm_substream *substream, unsigned long totbytes = params_buffer_bytes(params); struct s3c_dma_params *dma = snd_soc_dai_get_dma_data(rtd->cpu_dai, substream); - int ret = 0; - + struct samsung_dma_info dma_info; pr_debug("Entered %s\n", __func__); @@ -163,30 +163,26 @@ static int dma_hw_params(struct snd_pcm_substream *substream, pr_debug("params %p, client %p, channel %d\n", prtd->params, prtd->params->client, prtd->params->channel); - ret = s3c2410_dma_request(prtd->params->channel, - prtd->params->client, NULL); - - if (ret < 0) { - printk(KERN_ERR "failed to get dma channel\n"); - return ret; - } - - /* use the circular buffering if we have it available. */ - if (s3c_dma_has_circular()) - s3c2410_dma_setflags(prtd->params->channel, - S3C2410_DMAF_CIRCULAR); + prtd->params->ops = samsung_dma_get_ops(); + + dma_info.cap = (samsung_dma_has_circular() ? + DMA_CYCLIC : DMA_SLAVE); + dma_info.client = prtd->params->client; + dma_info.direction = + (substream->stream == SNDRV_PCM_STREAM_PLAYBACK + ? DMA_TO_DEVICE : DMA_FROM_DEVICE); + dma_info.width = prtd->params->dma_size; + dma_info.fifo = prtd->params->dma_addr; + prtd->params->ch = prtd->params->ops->request( + prtd->params->channel, &dma_info); } - s3c2410_dma_set_buffdone_fn(prtd->params->channel, - audio_buffdone); - snd_pcm_set_runtime_buffer(substream, &substream->dma_buffer); runtime->dma_bytes = totbytes; spin_lock_irq(&prtd->lock); prtd->dma_loaded = 0; - prtd->dma_limit = runtime->hw.periods_min; prtd->dma_period = params_period_bytes(params); prtd->dma_start = runtime->dma_addr; prtd->dma_pos = prtd->dma_start; @@ -202,11 +198,12 @@ static int dma_hw_free(struct snd_pcm_substream *substream) pr_debug("Entered %s\n", __func__); - /* TODO - do we need to ensure DMA flushed */ snd_pcm_set_runtime_buffer(substream, NULL); if (prtd->params) { - s3c2410_dma_free(prtd->params->channel, prtd->params->client); + prtd->params->ops->flush(prtd->params->ch); + prtd->params->ops->release(prtd->params->ch, + prtd->params->client); prtd->params = NULL; } @@ -225,23 +222,9 @@ static int dma_prepare(struct snd_pcm_substream *substream) if (!prtd->params) return 0; - /* channel needs configuring for mem=>device, increment memory addr, - * sync to pclk, half-word transfers to the IIS-FIFO. */ - if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) { - s3c2410_dma_devconfig(prtd->params->channel, - S3C2410_DMASRC_MEM, - prtd->params->dma_addr); - } else { - s3c2410_dma_devconfig(prtd->params->channel, - S3C2410_DMASRC_HW, - prtd->params->dma_addr); - } - - s3c2410_dma_config(prtd->params->channel, - prtd->params->dma_size); - /* flush the DMA channel */ - s3c2410_dma_ctrl(prtd->params->channel, S3C2410_DMAOP_FLUSH); + prtd->params->ops->flush(prtd->params->ch); + prtd->dma_loaded = 0; prtd->dma_pos = prtd->dma_start; @@ -265,14 +248,14 @@ static int dma_trigger(struct snd_pcm_substream *substream, int cmd) case SNDRV_PCM_TRIGGER_RESUME: case SNDRV_PCM_TRIGGER_PAUSE_RELEASE: prtd->state |= ST_RUNNING; - s3c2410_dma_ctrl(prtd->params->channel, S3C2410_DMAOP_START); + prtd->params->ops->trigger(prtd->params->ch); break; case SNDRV_PCM_TRIGGER_STOP: case SNDRV_PCM_TRIGGER_SUSPEND: case SNDRV_PCM_TRIGGER_PAUSE_PUSH: prtd->state &= ~ST_RUNNING; - s3c2410_dma_ctrl(prtd->params->channel, S3C2410_DMAOP_STOP); + prtd->params->ops->stop(prtd->params->ch); break; default: @@ -291,21 +274,12 @@ dma_pointer(struct snd_pcm_substream *substream) struct snd_pcm_runtime *runtime = substream->runtime; struct runtime_data *prtd = runtime->private_data; unsigned long res; - dma_addr_t src, dst; pr_debug("Entered %s\n", __func__); - spin_lock(&prtd->lock); - s3c2410_dma_getposition(prtd->params->channel, &src, &dst); - - if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) - res = dst - prtd->dma_start; - else - res = src - prtd->dma_start; - - spin_unlock(&prtd->lock); + res = prtd->dma_pos - prtd->dma_start; - pr_debug("Pointer %x %x\n", src, dst); + pr_debug("Pointer offset: %lu\n", res); /* we seem to be getting the odd error from the pcm library due * to out-of-bounds pointers. this is maybe due to the dma engine diff --git a/sound/soc/samsung/dma.h b/sound/soc/samsung/dma.h index c506592..7d1ead7 100644 --- a/sound/soc/samsung/dma.h +++ b/sound/soc/samsung/dma.h @@ -6,7 +6,7 @@ * Free Software Foundation; either version 2 of the License, or (at your * option) any later version. * - * ALSA PCM interface for the Samsung S3C24xx CPU + * ALSA PCM interface for the Samsung SoC */ #ifndef _S3C_AUDIO_H @@ -17,6 +17,8 @@ struct s3c_dma_params { int channel; /* Channel ID */ dma_addr_t dma_addr; int dma_size; /* Size of the DMA transfer */ + unsigned ch; + struct samsung_dma_ops *ops; }; #endif diff --git a/sound/soc/soc-cache.c b/sound/soc/soc-cache.c index d9f8ade..20b7f3b 100644 --- a/sound/soc/soc-cache.c +++ b/sound/soc/soc-cache.c @@ -203,14 +203,14 @@ static int snd_soc_rbtree_cache_sync(struct snd_soc_codec *codec) rbnode = rb_entry(node, struct snd_soc_rbtree_node, node); for (i = 0; i < rbnode->blklen; ++i) { regtmp = rbnode->base_reg + i; - WARN_ON(codec->writable_register && - codec->writable_register(codec, regtmp)); val = snd_soc_rbtree_get_register(rbnode, i); def = snd_soc_get_cache_val(codec->reg_def_copy, i, rbnode->word_size); if (val == def) continue; + WARN_ON(!snd_soc_codec_writable_register(codec, regtmp)); + codec->cache_bypass = 1; ret = snd_soc_write(codec, regtmp, val); codec->cache_bypass = 0; @@ -563,8 +563,7 @@ static int snd_soc_lzo_cache_sync(struct snd_soc_codec *codec) lzo_blocks = codec->reg_cache; for_each_set_bit(i, lzo_blocks[0]->sync_bmp, lzo_blocks[0]->sync_bmp_nbits) { - WARN_ON(codec->writable_register && - codec->writable_register(codec, i)); + WARN_ON(!snd_soc_codec_writable_register(codec, i)); ret = snd_soc_cache_read(codec, i, &val); if (ret) return ret; @@ -823,8 +822,6 @@ static int snd_soc_flat_cache_sync(struct snd_soc_codec *codec) codec_drv = codec->driver; for (i = 0; i < codec_drv->reg_cache_size; ++i) { - WARN_ON(codec->writable_register && - codec->writable_register(codec, i)); ret = snd_soc_cache_read(codec, i, &val); if (ret) return ret; @@ -832,6 +829,9 @@ static int snd_soc_flat_cache_sync(struct snd_soc_codec *codec) if (snd_soc_get_cache_val(codec->reg_def_copy, i, codec_drv->reg_word_size) == val) continue; + + WARN_ON(!snd_soc_codec_writable_register(codec, i)); + ret = snd_soc_write(codec, i, val); if (ret) return ret; diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c index b085d8e..ef69f5a 100644 --- a/sound/soc/soc-core.c +++ b/sound/soc/soc-core.c @@ -30,6 +30,7 @@ #include <linux/bitops.h> #include <linux/debugfs.h> #include <linux/platform_device.h> +#include <linux/ctype.h> #include <linux/slab.h> #include <sound/ac97_codec.h> #include <sound/core.h> @@ -1434,9 +1435,20 @@ static void snd_soc_instantiate_card(struct snd_soc_card *card) "%s", card->name); snprintf(card->snd_card->longname, sizeof(card->snd_card->longname), "%s", card->long_name ? card->long_name : card->name); - if (card->driver_name) - strlcpy(card->snd_card->driver, card->driver_name, - sizeof(card->snd_card->driver)); + snprintf(card->snd_card->driver, sizeof(card->snd_card->driver), + "%s", card->driver_name ? card->driver_name : card->name); + for (i = 0; i < ARRAY_SIZE(card->snd_card->driver); i++) { + switch (card->snd_card->driver[i]) { + case '_': + case '-': + case '\0': + break; + default: + if (!isalnum(card->snd_card->driver[i])) + card->snd_card->driver[i] = '_'; + break; + } + } if (card->late_probe) { ret = card->late_probe(card); @@ -1633,7 +1645,7 @@ int snd_soc_codec_readable_register(struct snd_soc_codec *codec, if (codec->readable_register) return codec->readable_register(codec, reg); else - return 0; + return 1; } EXPORT_SYMBOL_GPL(snd_soc_codec_readable_register); @@ -1651,7 +1663,7 @@ int snd_soc_codec_writable_register(struct snd_soc_codec *codec, if (codec->writable_register) return codec->writable_register(codec, reg); else - return 0; + return 1; } EXPORT_SYMBOL_GPL(snd_soc_codec_writable_register); diff --git a/sound/soc/soc-dapm.c b/sound/soc/soc-dapm.c index 7e15914..d67c637 100644 --- a/sound/soc/soc-dapm.c +++ b/sound/soc/soc-dapm.c @@ -2763,7 +2763,7 @@ EXPORT_SYMBOL_GPL(snd_soc_dapm_ignore_suspend); /** * snd_soc_dapm_free - free dapm resources - * @card: SoC device + * @dapm: DAPM context * * Free all dapm widgets and resources. */ diff --git a/sound/soc/soc-jack.c b/sound/soc/soc-jack.c index 38b0013..fa31d9c 100644 --- a/sound/soc/soc-jack.c +++ b/sound/soc/soc-jack.c @@ -105,7 +105,7 @@ void snd_soc_jack_report(struct snd_soc_jack *jack, int status, int mask) snd_soc_dapm_sync(dapm); - snd_jack_report(jack->jack, status); + snd_jack_report(jack->jack, jack->status); out: mutex_unlock(&codec->mutex); diff --git a/sound/usb/card.c b/sound/usb/card.c index 781d9e6..d8f2bf4 100644 --- a/sound/usb/card.c +++ b/sound/usb/card.c @@ -530,8 +530,11 @@ snd_usb_audio_probe(struct usb_device *dev, return chip; __error: - if (chip && !chip->num_interfaces) - snd_card_free(chip->card); + if (chip) { + if (!chip->num_interfaces) + snd_card_free(chip->card); + chip->probing = 0; + } mutex_unlock(®ister_mutex); __err_val: return NULL; diff --git a/tools/perf/Makefile b/tools/perf/Makefile index 3b8f7b8..e9d5c27 100644 --- a/tools/perf/Makefile +++ b/tools/perf/Makefile @@ -30,6 +30,8 @@ endif # Define EXTRA_CFLAGS=-m64 or EXTRA_CFLAGS=-m32 as appropriate for cross-builds. # # Define NO_DWARF if you do not want debug-info analysis feature at all. +# +# Define WERROR=0 to disable treating any warnings as errors. $(OUTPUT)PERF-VERSION-FILE: .FORCE-PERF-VERSION-FILE @$(SHELL_PATH) util/PERF-VERSION-GEN $(OUTPUT) @@ -63,6 +65,11 @@ ifeq ($(ARCH),x86_64) endif endif +# Treat warnings as errors unless directed not to +ifneq ($(WERROR),0) + CFLAGS_WERROR := -Werror +endif + # # Include saner warnings here, which can catch bugs: # @@ -95,7 +102,7 @@ ifndef PERF_DEBUG CFLAGS_OPTIMIZE = -O6 endif -CFLAGS = -fno-omit-frame-pointer -ggdb3 -Wall -Wextra -std=gnu99 -Werror $(CFLAGS_OPTIMIZE) -D_FORTIFY_SOURCE=2 $(EXTRA_WARNINGS) $(EXTRA_CFLAGS) +CFLAGS = -fno-omit-frame-pointer -ggdb3 -Wall -Wextra -std=gnu99 $(CFLAGS_WERROR) $(CFLAGS_OPTIMIZE) -D_FORTIFY_SOURCE=2 $(EXTRA_WARNINGS) $(EXTRA_CFLAGS) EXTLIBS = -lpthread -lrt -lelf -lm ALL_CFLAGS = $(CFLAGS) -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 ALL_LDFLAGS = $(LDFLAGS) diff --git a/tools/perf/builtin-record.c b/tools/perf/builtin-record.c index 6b0519f..f4c3fbe 100644 --- a/tools/perf/builtin-record.c +++ b/tools/perf/builtin-record.c @@ -161,6 +161,7 @@ static void config_attr(struct perf_evsel *evsel, struct perf_evlist *evlist) struct perf_event_attr *attr = &evsel->attr; int track = !evsel->idx; /* only the first counter needs these */ + attr->disabled = 1; attr->inherit = !no_inherit; attr->read_format = PERF_FORMAT_TOTAL_TIME_ENABLED | PERF_FORMAT_TOTAL_TIME_RUNNING | @@ -671,6 +672,8 @@ static int __cmd_record(int argc, const char **argv) } } + perf_evlist__enable(evsel_list); + /* * Let the child rip */ diff --git a/tools/perf/builtin-test.c b/tools/perf/builtin-test.c index 55f4c76..efe696f 100644 --- a/tools/perf/builtin-test.c +++ b/tools/perf/builtin-test.c @@ -561,7 +561,7 @@ static int test__basic_mmap(void) } err = perf_event__parse_sample(event, attr.sample_type, sample_size, - false, &sample); + false, &sample, false); if (err) { pr_err("Can't parse sample, err = %d\n", err); goto out_munmap; diff --git a/tools/perf/builtin-top.c b/tools/perf/builtin-top.c index a43433f..d28013b 100644 --- a/tools/perf/builtin-top.c +++ b/tools/perf/builtin-top.c @@ -191,7 +191,8 @@ static void __zero_source_counters(struct sym_entry *syme) symbol__annotate_zero_histograms(sym); } -static void record_precise_ip(struct sym_entry *syme, int counter, u64 ip) +static void record_precise_ip(struct sym_entry *syme, struct map *map, + int counter, u64 ip) { struct annotation *notes; struct symbol *sym; @@ -205,8 +206,8 @@ static void record_precise_ip(struct sym_entry *syme, int counter, u64 ip) if (pthread_mutex_trylock(¬es->lock)) return; - ip = syme->map->map_ip(syme->map, ip); - symbol__inc_addr_samples(sym, syme->map, counter, ip); + ip = map->map_ip(map, ip); + symbol__inc_addr_samples(sym, map, counter, ip); pthread_mutex_unlock(¬es->lock); } @@ -810,7 +811,7 @@ static void perf_event__process_sample(const union perf_event *event, evsel = perf_evlist__id2evsel(top.evlist, sample->id); assert(evsel != NULL); syme->count[evsel->idx]++; - record_precise_ip(syme, evsel->idx, ip); + record_precise_ip(syme, al.map, evsel->idx, ip); pthread_mutex_lock(&top.active_symbols_lock); if (list_empty(&syme->node) || !syme->node.next) { static bool first = true; diff --git a/tools/perf/util/event.c b/tools/perf/util/event.c index 3c1b8a6..437f8ca 100644 --- a/tools/perf/util/event.c +++ b/tools/perf/util/event.c @@ -169,12 +169,17 @@ static int perf_event__synthesize_mmap_events(union perf_event *event, continue; pbf += n + 3; if (*pbf == 'x') { /* vm_exec */ + char anonstr[] = "//anon\n"; char *execname = strchr(bf, '/'); /* Catch VDSO */ if (execname == NULL) execname = strstr(bf, "[vdso]"); + /* Catch anonymous mmaps */ + if ((execname == NULL) && !strstr(bf, "[")) + execname = anonstr; + if (execname == NULL) continue; diff --git a/tools/perf/util/event.h b/tools/perf/util/event.h index 1d7f664..357a85b 100644 --- a/tools/perf/util/event.h +++ b/tools/perf/util/event.h @@ -186,6 +186,6 @@ const char *perf_event__name(unsigned int id); int perf_event__parse_sample(const union perf_event *event, u64 type, int sample_size, bool sample_id_all, - struct perf_sample *sample); + struct perf_sample *sample, bool swapped); #endif /* __PERF_RECORD_H */ diff --git a/tools/perf/util/evlist.c b/tools/perf/util/evlist.c index c12bd47..72e9f48 100644 --- a/tools/perf/util/evlist.c +++ b/tools/perf/util/evlist.c @@ -113,6 +113,19 @@ void perf_evlist__disable(struct perf_evlist *evlist) } } +void perf_evlist__enable(struct perf_evlist *evlist) +{ + int cpu, thread; + struct perf_evsel *pos; + + for (cpu = 0; cpu < evlist->cpus->nr; cpu++) { + list_for_each_entry(pos, &evlist->entries, node) { + for (thread = 0; thread < evlist->threads->nr; thread++) + ioctl(FD(pos, cpu, thread), PERF_EVENT_IOC_ENABLE); + } + } +} + int perf_evlist__alloc_pollfd(struct perf_evlist *evlist) { int nfds = evlist->cpus->nr * evlist->threads->nr * evlist->nr_entries; diff --git a/tools/perf/util/evlist.h b/tools/perf/util/evlist.h index ce85ae9..f349150 100644 --- a/tools/perf/util/evlist.h +++ b/tools/perf/util/evlist.h @@ -54,6 +54,7 @@ int perf_evlist__mmap(struct perf_evlist *evlist, int pages, bool overwrite); void perf_evlist__munmap(struct perf_evlist *evlist); void perf_evlist__disable(struct perf_evlist *evlist); +void perf_evlist__enable(struct perf_evlist *evlist); static inline void perf_evlist__set_maps(struct perf_evlist *evlist, struct cpu_map *cpus, diff --git a/tools/perf/util/evsel.c b/tools/perf/util/evsel.c index a03a36b..c5748c5 100644 --- a/tools/perf/util/evsel.c +++ b/tools/perf/util/evsel.c @@ -7,6 +7,8 @@ * Released under the GPL v2. (and only v2, not any later version) */ +#include <byteswap.h> +#include "asm/bug.h" #include "evsel.h" #include "evlist.h" #include "util.h" @@ -342,10 +344,20 @@ static bool sample_overlap(const union perf_event *event, int perf_event__parse_sample(const union perf_event *event, u64 type, int sample_size, bool sample_id_all, - struct perf_sample *data) + struct perf_sample *data, bool swapped) { const u64 *array; + /* + * used for cross-endian analysis. See git commit 65014ab3 + * for why this goofiness is needed. + */ + union { + u64 val64; + u32 val32[2]; + } u; + + data->cpu = data->pid = data->tid = -1; data->stream_id = data->id = data->time = -1ULL; @@ -366,9 +378,16 @@ int perf_event__parse_sample(const union perf_event *event, u64 type, } if (type & PERF_SAMPLE_TID) { - u32 *p = (u32 *)array; - data->pid = p[0]; - data->tid = p[1]; + u.val64 = *array; + if (swapped) { + /* undo swap of u64, then swap on individual u32s */ + u.val64 = bswap_64(u.val64); + u.val32[0] = bswap_32(u.val32[0]); + u.val32[1] = bswap_32(u.val32[1]); + } + + data->pid = u.val32[0]; + data->tid = u.val32[1]; array++; } @@ -395,8 +414,15 @@ int perf_event__parse_sample(const union perf_event *event, u64 type, } if (type & PERF_SAMPLE_CPU) { - u32 *p = (u32 *)array; - data->cpu = *p; + + u.val64 = *array; + if (swapped) { + /* undo swap of u64, then swap on individual u32s */ + u.val64 = bswap_64(u.val64); + u.val32[0] = bswap_32(u.val32[0]); + } + + data->cpu = u.val32[0]; array++; } @@ -423,18 +449,24 @@ int perf_event__parse_sample(const union perf_event *event, u64 type, } if (type & PERF_SAMPLE_RAW) { - u32 *p = (u32 *)array; + u.val64 = *array; + if (WARN_ONCE(swapped, + "Endianness of raw data not corrected!\n")) { + /* undo swap of u64, then swap on individual u32s */ + u.val64 = bswap_64(u.val64); + u.val32[0] = bswap_32(u.val32[0]); + u.val32[1] = bswap_32(u.val32[1]); + } if (sample_overlap(event, array, sizeof(u32))) return -EFAULT; - data->raw_size = *p; - p++; + data->raw_size = u.val32[0]; - if (sample_overlap(event, p, data->raw_size)) + if (sample_overlap(event, &u.val32[1], data->raw_size)) return -EFAULT; - data->raw_data = p; + data->raw_data = &u.val32[1]; } return 0; diff --git a/tools/perf/util/probe-finder.c b/tools/perf/util/probe-finder.c index 555fc38..5d73262 100644 --- a/tools/perf/util/probe-finder.c +++ b/tools/perf/util/probe-finder.c @@ -659,7 +659,7 @@ static int find_variable(Dwarf_Die *sc_die, struct probe_finder *pf) if (!die_find_variable_at(&pf->cu_die, pf->pvar->var, 0, &vr_die)) ret = -ENOENT; } - if (ret == 0) + if (ret >= 0) ret = convert_variable(&vr_die, pf); if (ret < 0) diff --git a/tools/perf/util/python.c b/tools/perf/util/python.c index cbc8f21..7624324 100644 --- a/tools/perf/util/python.c +++ b/tools/perf/util/python.c @@ -803,7 +803,7 @@ static PyObject *pyrf_evlist__read_on_cpu(struct pyrf_evlist *pevlist, first = list_entry(evlist->entries.next, struct perf_evsel, node); err = perf_event__parse_sample(event, first->attr.sample_type, perf_evsel__sample_size(first), - sample_id_all, &pevent->sample); + sample_id_all, &pevent->sample, false); if (err) return PyErr_Format(PyExc_OSError, "perf: can't parse sample, err=%d", err); diff --git a/tools/perf/util/session.h b/tools/perf/util/session.h index 170601e..974d0cb 100644 --- a/tools/perf/util/session.h +++ b/tools/perf/util/session.h @@ -162,7 +162,8 @@ static inline int perf_session__parse_sample(struct perf_session *session, { return perf_event__parse_sample(event, session->sample_type, session->sample_size, - session->sample_id_all, sample); + session->sample_id_all, sample, + session->header.needs_swap); } struct perf_evsel *perf_session__find_first_evtype(struct perf_session *session, diff --git a/tools/perf/util/sort.c b/tools/perf/util/sort.c index 401e220..1ee8f1e 100644 --- a/tools/perf/util/sort.c +++ b/tools/perf/util/sort.c @@ -151,11 +151,17 @@ sort__sym_cmp(struct hist_entry *left, struct hist_entry *right) { u64 ip_l, ip_r; + if (!left->ms.sym && !right->ms.sym) + return right->level - left->level; + + if (!left->ms.sym || !right->ms.sym) + return cmp_null(left->ms.sym, right->ms.sym); + if (left->ms.sym == right->ms.sym) return 0; - ip_l = left->ms.sym ? left->ms.sym->start : left->ip; - ip_r = right->ms.sym ? right->ms.sym->start : right->ip; + ip_l = left->ms.sym->start; + ip_r = right->ms.sym->start; return (int64_t)(ip_r - ip_l); } diff --git a/tools/perf/util/symbol.c b/tools/perf/util/symbol.c index 469c026..40eeaf0 100644 --- a/tools/perf/util/symbol.c +++ b/tools/perf/util/symbol.c @@ -74,16 +74,104 @@ static void dso__set_sorted_by_name(struct dso *dso, enum map_type type) bool symbol_type__is_a(char symbol_type, enum map_type map_type) { + symbol_type = toupper(symbol_type); + switch (map_type) { case MAP__FUNCTION: return symbol_type == 'T' || symbol_type == 'W'; case MAP__VARIABLE: - return symbol_type == 'D' || symbol_type == 'd'; + return symbol_type == 'D'; default: return false; } } +static int prefix_underscores_count(const char *str) +{ + const char *tail = str; + + while (*tail == '_') + tail++; + + return tail - str; +} + +#define SYMBOL_A 0 +#define SYMBOL_B 1 + +static int choose_best_symbol(struct symbol *syma, struct symbol *symb) +{ + s64 a; + s64 b; + + /* Prefer a symbol with non zero length */ + a = syma->end - syma->start; + b = symb->end - symb->start; + if ((b == 0) && (a > 0)) + return SYMBOL_A; + else if ((a == 0) && (b > 0)) + return SYMBOL_B; + + /* Prefer a non weak symbol over a weak one */ + a = syma->binding == STB_WEAK; + b = symb->binding == STB_WEAK; + if (b && !a) + return SYMBOL_A; + if (a && !b) + return SYMBOL_B; + + /* Prefer a global symbol over a non global one */ + a = syma->binding == STB_GLOBAL; + b = symb->binding == STB_GLOBAL; + if (a && !b) + return SYMBOL_A; + if (b && !a) + return SYMBOL_B; + + /* Prefer a symbol with less underscores */ + a = prefix_underscores_count(syma->name); + b = prefix_underscores_count(symb->name); + if (b > a) + return SYMBOL_A; + else if (a > b) + return SYMBOL_B; + + /* If all else fails, choose the symbol with the longest name */ + if (strlen(syma->name) >= strlen(symb->name)) + return SYMBOL_A; + else + return SYMBOL_B; +} + +static void symbols__fixup_duplicate(struct rb_root *symbols) +{ + struct rb_node *nd; + struct symbol *curr, *next; + + nd = rb_first(symbols); + + while (nd) { + curr = rb_entry(nd, struct symbol, rb_node); +again: + nd = rb_next(&curr->rb_node); + next = rb_entry(nd, struct symbol, rb_node); + + if (!nd) + break; + + if (curr->start != next->start) + continue; + + if (choose_best_symbol(curr, next) == SYMBOL_A) { + rb_erase(&next->rb_node, symbols); + goto again; + } else { + nd = rb_next(&curr->rb_node); + rb_erase(&curr->rb_node, symbols); + } + } +} + static void symbols__fixup_end(struct rb_root *symbols) { struct rb_node *nd, *prevnd = rb_first(symbols); @@ -438,18 +526,11 @@ int kallsyms__parse(const char *filename, void *arg, char *line = NULL; size_t n; int err = -1; - u64 prev_start = 0; - char prev_symbol_type = 0; - char *prev_symbol_name; FILE *file = fopen(filename, "r"); if (file == NULL) goto out_failure; - prev_symbol_name = malloc(KSYM_NAME_LEN); - if (prev_symbol_name == NULL) - goto out_close; - err = 0; while (!feof(file)) { @@ -470,7 +551,7 @@ int kallsyms__parse(const char *filename, void *arg, if (len + 2 >= line_len) continue; - symbol_type = toupper(line[len]); + symbol_type = line[len]; len += 2; symbol_name = line + len; len = line_len - len; @@ -480,24 +561,18 @@ int kallsyms__parse(const char *filename, void *arg, break; } - if (prev_symbol_type) { - u64 end = start; - if (end != prev_start) - --end; - err = process_symbol(arg, prev_symbol_name, - prev_symbol_type, prev_start, end); - if (err) - break; - } - - memcpy(prev_symbol_name, symbol_name, len + 1); - prev_symbol_type = symbol_type; - prev_start = start; + /* + * module symbols are not sorted so we add all + * symbols with zero length and rely on + * symbols__fixup_end() to fix it up. + */ + err = process_symbol(arg, symbol_name, + symbol_type, start, start); + if (err) + break; } - free(prev_symbol_name); free(line); -out_close: fclose(file); return err; @@ -703,6 +778,9 @@ int dso__load_kallsyms(struct dso *dso, const char *filename, if (dso__load_all_kallsyms(dso, filename, map) < 0) return -1; + symbols__fixup_duplicate(&dso->symbols[map->type]); + symbols__fixup_end(&dso->symbols[map->type]); + if (dso->kernel == DSO_TYPE_GUEST_KERNEL) dso->symtab_type = SYMTAB__GUEST_KALLSYMS; else @@ -1092,8 +1170,7 @@ static int dso__load_sym(struct dso *dso, struct map *map, const char *name, if (dso->has_build_id) { u8 build_id[BUILD_ID_SIZE]; - if (elf_read_build_id(elf, build_id, - BUILD_ID_SIZE) != BUILD_ID_SIZE) + if (elf_read_build_id(elf, build_id, BUILD_ID_SIZE) < 0) goto out_elf_end; if (!dso__build_id_equal(dso, build_id)) @@ -1111,6 +1188,8 @@ static int dso__load_sym(struct dso *dso, struct map *map, const char *name, } opdsec = elf_section_by_name(elf, &ehdr, &opdshdr, ".opd", &opdidx); + if (opdshdr.sh_type != SHT_PROGBITS) + opdsec = NULL; if (opdsec) opddata = elf_rawdata(opdsec, NULL); @@ -1276,6 +1355,7 @@ new_symbol: * For misannotated, zeroed, ASM function sizes. */ if (nr > 0) { + symbols__fixup_duplicate(&dso->symbols[map->type]); symbols__fixup_end(&dso->symbols[map->type]); if (kmap) { /* @@ -1362,8 +1442,8 @@ static int elf_read_build_id(Elf *elf, void *bf, size_t size) ptr = data->d_buf; while (ptr < (data->d_buf + data->d_size)) { GElf_Nhdr *nhdr = ptr; - int namesz = NOTE_ALIGN(nhdr->n_namesz), - descsz = NOTE_ALIGN(nhdr->n_descsz); + size_t namesz = NOTE_ALIGN(nhdr->n_namesz), + descsz = NOTE_ALIGN(nhdr->n_descsz); const char *name; ptr += sizeof(*nhdr); @@ -1372,8 +1452,10 @@ static int elf_read_build_id(Elf *elf, void *bf, size_t size) if (nhdr->n_type == NT_GNU_BUILD_ID && nhdr->n_namesz == sizeof("GNU")) { if (memcmp(name, "GNU", sizeof("GNU")) == 0) { - memcpy(bf, ptr, BUILD_ID_SIZE); - err = BUILD_ID_SIZE; + size_t sz = min(size, descsz); + memcpy(bf, ptr, sz); + memset(bf + sz, 0, size - sz); + err = descsz; break; } } @@ -1425,7 +1507,7 @@ int sysfs__read_build_id(const char *filename, void *build_id, size_t size) while (1) { char bf[BUFSIZ]; GElf_Nhdr nhdr; - int namesz, descsz; + size_t namesz, descsz; if (read(fd, &nhdr, sizeof(nhdr)) != sizeof(nhdr)) break; @@ -1434,15 +1516,16 @@ int sysfs__read_build_id(const char *filename, void *build_id, size_t size) descsz = NOTE_ALIGN(nhdr.n_descsz); if (nhdr.n_type == NT_GNU_BUILD_ID && nhdr.n_namesz == sizeof("GNU")) { - if (read(fd, bf, namesz) != namesz) + if (read(fd, bf, namesz) != (ssize_t)namesz) break; if (memcmp(bf, "GNU", sizeof("GNU")) == 0) { - if (read(fd, build_id, - BUILD_ID_SIZE) == BUILD_ID_SIZE) { + size_t sz = min(descsz, size); + if (read(fd, build_id, sz) == (ssize_t)sz) { + memset(build_id + sz, 0, size - sz); err = 0; break; } - } else if (read(fd, bf, descsz) != descsz) + } else if (read(fd, bf, descsz) != (ssize_t)descsz) break; } else { int n = namesz + descsz; |