diff options
-rw-r--r-- | drivers/spi/spi.c | 222 |
1 files changed, 118 insertions, 104 deletions
diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index ebcb33d..a3557c5 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -1220,6 +1220,121 @@ err_init_queue: /*-------------------------------------------------------------------------*/ #if defined(CONFIG_OF) +static struct spi_device * +of_register_spi_device(struct spi_master *master, struct device_node *nc) +{ + struct spi_device *spi; + int rc; + u32 value; + + /* Alloc an spi_device */ + spi = spi_alloc_device(master); + if (!spi) { + dev_err(&master->dev, "spi_device alloc error for %s\n", + nc->full_name); + rc = -ENOMEM; + goto err_out; + } + + /* Select device driver */ + rc = of_modalias_node(nc, spi->modalias, + sizeof(spi->modalias)); + if (rc < 0) { + dev_err(&master->dev, "cannot find modalias for %s\n", + nc->full_name); + goto err_out; + } + + /* Device address */ + rc = of_property_read_u32(nc, "reg", &value); + if (rc) { + dev_err(&master->dev, "%s has no valid 'reg' property (%d)\n", + nc->full_name, rc); + goto err_out; + } + spi->chip_select = value; + + /* Mode (clock phase/polarity/etc.) */ + if (of_find_property(nc, "spi-cpha", NULL)) + spi->mode |= SPI_CPHA; + if (of_find_property(nc, "spi-cpol", NULL)) + spi->mode |= SPI_CPOL; + if (of_find_property(nc, "spi-cs-high", NULL)) + spi->mode |= SPI_CS_HIGH; + if (of_find_property(nc, "spi-3wire", NULL)) + spi->mode |= SPI_3WIRE; + if (of_find_property(nc, "spi-lsb-first", NULL)) + spi->mode |= SPI_LSB_FIRST; + + /* Device DUAL/QUAD mode */ + if (!of_property_read_u32(nc, "spi-tx-bus-width", &value)) { + switch (value) { + case 1: + break; + case 2: + spi->mode |= SPI_TX_DUAL; + break; + case 4: + spi->mode |= SPI_TX_QUAD; + break; + default: + dev_warn(&master->dev, + "spi-tx-bus-width %d not supported\n", + value); + break; + } + } + + if (!of_property_read_u32(nc, "spi-rx-bus-width", &value)) { + switch (value) { + case 1: + break; + case 2: + spi->mode |= SPI_RX_DUAL; + break; + case 4: + spi->mode |= SPI_RX_QUAD; + break; + default: + dev_warn(&master->dev, + "spi-rx-bus-width %d not supported\n", + value); + break; + } + } + + /* Device speed */ + rc = of_property_read_u32(nc, "spi-max-frequency", &value); + if (rc) { + dev_err(&master->dev, "%s has no valid 'spi-max-frequency' property (%d)\n", + nc->full_name, rc); + goto err_out; + } + spi->max_speed_hz = value; + + /* IRQ */ + spi->irq = irq_of_parse_and_map(nc, 0); + + /* Store a pointer to the node in the device structure */ + of_node_get(nc); + spi->dev.of_node = nc; + + /* Register the new device */ + request_module("%s%s", SPI_MODULE_PREFIX, spi->modalias); + rc = spi_add_device(spi); + if (rc) { + dev_err(&master->dev, "spi_device register error %s\n", + nc->full_name); + goto err_out; + } + + return spi; + +err_out: + spi_dev_put(spi); + return ERR_PTR(rc); +} + /** * of_register_spi_devices() - Register child devices onto the SPI bus * @master: Pointer to spi_master device @@ -1231,116 +1346,15 @@ static void of_register_spi_devices(struct spi_master *master) { struct spi_device *spi; struct device_node *nc; - int rc; - u32 value; if (!master->dev.of_node) return; for_each_available_child_of_node(master->dev.of_node, nc) { - /* Alloc an spi_device */ - spi = spi_alloc_device(master); - if (!spi) { - dev_err(&master->dev, "spi_device alloc error for %s\n", + spi = of_register_spi_device(master, nc); + if (IS_ERR(spi)) + dev_warn(&master->dev, "Failed to create SPI device for %s\n", nc->full_name); - spi_dev_put(spi); - continue; - } - - /* Select device driver */ - if (of_modalias_node(nc, spi->modalias, - sizeof(spi->modalias)) < 0) { - dev_err(&master->dev, "cannot find modalias for %s\n", - nc->full_name); - spi_dev_put(spi); - continue; - } - - /* Device address */ - rc = of_property_read_u32(nc, "reg", &value); - if (rc) { - dev_err(&master->dev, "%s has no valid 'reg' property (%d)\n", - nc->full_name, rc); - spi_dev_put(spi); - continue; - } - spi->chip_select = value; - - /* Mode (clock phase/polarity/etc.) */ - if (of_find_property(nc, "spi-cpha", NULL)) - spi->mode |= SPI_CPHA; - if (of_find_property(nc, "spi-cpol", NULL)) - spi->mode |= SPI_CPOL; - if (of_find_property(nc, "spi-cs-high", NULL)) - spi->mode |= SPI_CS_HIGH; - if (of_find_property(nc, "spi-3wire", NULL)) - spi->mode |= SPI_3WIRE; - if (of_find_property(nc, "spi-lsb-first", NULL)) - spi->mode |= SPI_LSB_FIRST; - - /* Device DUAL/QUAD mode */ - if (!of_property_read_u32(nc, "spi-tx-bus-width", &value)) { - switch (value) { - case 1: - break; - case 2: - spi->mode |= SPI_TX_DUAL; - break; - case 4: - spi->mode |= SPI_TX_QUAD; - break; - default: - dev_warn(&master->dev, - "spi-tx-bus-width %d not supported\n", - value); - break; - } - } - - if (!of_property_read_u32(nc, "spi-rx-bus-width", &value)) { - switch (value) { - case 1: - break; - case 2: - spi->mode |= SPI_RX_DUAL; - break; - case 4: - spi->mode |= SPI_RX_QUAD; - break; - default: - dev_warn(&master->dev, - "spi-rx-bus-width %d not supported\n", - value); - break; - } - } - - /* Device speed */ - rc = of_property_read_u32(nc, "spi-max-frequency", &value); - if (rc) { - dev_err(&master->dev, "%s has no valid 'spi-max-frequency' property (%d)\n", - nc->full_name, rc); - spi_dev_put(spi); - continue; - } - spi->max_speed_hz = value; - - /* IRQ */ - spi->irq = irq_of_parse_and_map(nc, 0); - - /* Store a pointer to the node in the device structure */ - of_node_get(nc); - spi->dev.of_node = nc; - - /* Register the new device */ - request_module("%s%s", SPI_MODULE_PREFIX, spi->modalias); - rc = spi_add_device(spi); - if (rc) { - dev_err(&master->dev, "spi_device register error %s\n", - nc->full_name); - spi_dev_put(spi); - } - } } #else |