diff options
-rw-r--r-- | Documentation/DocBook/gpu.tmpl | 6 | ||||
-rw-r--r-- | drivers/gpu/drm/Makefile | 2 | ||||
-rw-r--r-- | drivers/gpu/drm/drm_dp_dual_mode_helper.c | 366 | ||||
-rw-r--r-- | include/drm/drm_dp_dual_mode_helper.h | 92 |
4 files changed, 465 insertions, 1 deletions
diff --git a/Documentation/DocBook/gpu.tmpl b/Documentation/DocBook/gpu.tmpl index 1464fb2..c248124 100644 --- a/Documentation/DocBook/gpu.tmpl +++ b/Documentation/DocBook/gpu.tmpl @@ -1623,6 +1623,12 @@ void intel_crt_init(struct drm_device *dev) !Edrivers/gpu/drm/drm_dp_helper.c </sect2> <sect2> + <title>Display Port Dual Mode Adaptor Helper Functions Reference</title> +!Pdrivers/gpu/drm/drm_dp_dual_mode_helper.c dp dual mode helpers +!Iinclude/drm/drm_dp_dual_mode_helper.h +!Edrivers/gpu/drm/drm_dp_dual_mode_helper.c + </sect2> + <sect2> <title>Display Port MST Helper Functions Reference</title> !Pdrivers/gpu/drm/drm_dp_mst_topology.c dp mst helper !Iinclude/drm/drm_dp_mst_helper.h diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile index 6eb94fc..22228ef 100644 --- a/drivers/gpu/drm/Makefile +++ b/drivers/gpu/drm/Makefile @@ -23,7 +23,7 @@ drm-$(CONFIG_AGP) += drm_agpsupport.o drm_kms_helper-y := drm_crtc_helper.o drm_dp_helper.o drm_probe_helper.o \ drm_plane_helper.o drm_dp_mst_topology.o drm_atomic_helper.o \ - drm_kms_helper_common.o + drm_kms_helper_common.o drm_dp_dual_mode_helper.o drm_kms_helper-$(CONFIG_DRM_LOAD_EDID_FIRMWARE) += drm_edid_load.o drm_kms_helper-$(CONFIG_DRM_FBDEV_EMULATION) += drm_fb_helper.o diff --git a/drivers/gpu/drm/drm_dp_dual_mode_helper.c b/drivers/gpu/drm/drm_dp_dual_mode_helper.c new file mode 100644 index 0000000..a7b2a75 --- /dev/null +++ b/drivers/gpu/drm/drm_dp_dual_mode_helper.c @@ -0,0 +1,366 @@ +/* + * Copyright © 2016 Intel Corporation + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#include <linux/errno.h> +#include <linux/export.h> +#include <linux/i2c.h> +#include <linux/slab.h> +#include <linux/string.h> +#include <drm/drm_dp_dual_mode_helper.h> +#include <drm/drmP.h> + +/** + * DOC: dp dual mode helpers + * + * Helper functions to deal with DP dual mode (aka. DP++) adaptors. + * + * Type 1: + * Adaptor registers (if any) and the sink DDC bus may be accessed via I2C. + * + * Type 2: + * Adaptor registers and sink DDC bus can be accessed either via I2C or + * I2C-over-AUX. Source devices may choose to implement either of these + * access methods. + */ + +#define DP_DUAL_MODE_SLAVE_ADDRESS 0x40 + +/** + * drm_dp_dual_mode_read - Read from the DP dual mode adaptor register(s) + * @adapter: I2C adapter for the DDC bus + * @offset: register offset + * @buffer: buffer for return data + * @size: sizo of the buffer + * + * Reads @size bytes from the DP dual mode adaptor registers + * starting at @offset. + * + * Returns: + * 0 on success, negative error code on failure + */ +ssize_t drm_dp_dual_mode_read(struct i2c_adapter *adapter, + u8 offset, void *buffer, size_t size) +{ + struct i2c_msg msgs[] = { + { + .addr = DP_DUAL_MODE_SLAVE_ADDRESS, + .flags = 0, + .len = 1, + .buf = &offset, + }, + { + .addr = DP_DUAL_MODE_SLAVE_ADDRESS, + .flags = I2C_M_RD, + .len = size, + .buf = buffer, + }, + }; + int ret; + + ret = i2c_transfer(adapter, msgs, ARRAY_SIZE(msgs)); + if (ret < 0) + return ret; + if (ret != ARRAY_SIZE(msgs)) + return -EPROTO; + + return 0; +} +EXPORT_SYMBOL(drm_dp_dual_mode_read); + +/** + * drm_dp_dual_mode_write - Write to the DP dual mode adaptor register(s) + * @adapter: I2C adapter for the DDC bus + * @offset: register offset + * @buffer: buffer for write data + * @size: sizo of the buffer + * + * Writes @size bytes to the DP dual mode adaptor registers + * starting at @offset. + * + * Returns: + * 0 on success, negative error code on failure + */ +ssize_t drm_dp_dual_mode_write(struct i2c_adapter *adapter, + u8 offset, const void *buffer, size_t size) +{ + struct i2c_msg msg = { + .addr = DP_DUAL_MODE_SLAVE_ADDRESS, + .flags = 0, + .len = 1 + size, + .buf = NULL, + }; + void *data; + int ret; + + data = kmalloc(msg.len, GFP_TEMPORARY); + if (!data) + return -ENOMEM; + + msg.buf = data; + + memcpy(data, &offset, 1); + memcpy(data + 1, buffer, size); + + ret = i2c_transfer(adapter, &msg, 1); + + kfree(data); + + if (ret < 0) + return ret; + if (ret != 1) + return -EPROTO; + + return 0; +} +EXPORT_SYMBOL(drm_dp_dual_mode_write); + +static bool is_hdmi_adaptor(const char hdmi_id[DP_DUAL_MODE_HDMI_ID_LEN]) +{ + static const char dp_dual_mode_hdmi_id[DP_DUAL_MODE_HDMI_ID_LEN] = + "DP-HDMI ADAPTOR\x04"; + + return memcmp(hdmi_id, dp_dual_mode_hdmi_id, + sizeof(dp_dual_mode_hdmi_id)) == 0; +} + +static bool is_type2_adaptor(uint8_t adaptor_id) +{ + return adaptor_id == (DP_DUAL_MODE_TYPE_TYPE2 | + DP_DUAL_MODE_REV_TYPE2); +} + +/** + * drm_dp_dual_mode_detect - Identify the DP dual mode adaptor + * @adapter: I2C adapter for the DDC bus + * + * Attempt to identify the type of the DP dual mode adaptor used. + * + * Note that when the answer is @DRM_DP_DUAL_MODE_UNKNOWN it's not + * certain whether we're dealing with a native HDMI port or + * a type 1 DVI dual mode adaptor. The driver will have to use + * some other hardware/driver specific mechanism to make that + * distinction. + * + * Returns: + * The type of the DP dual mode adaptor used + */ +enum drm_dp_dual_mode_type drm_dp_dual_mode_detect(struct i2c_adapter *adapter) +{ + char hdmi_id[DP_DUAL_MODE_HDMI_ID_LEN] = {}; + uint8_t adaptor_id = 0x00; + ssize_t ret; + + /* + * Let's see if the adaptor is there the by reading the + * HDMI ID registers. + * + * Note that type 1 DVI adaptors are not required to implemnt + * any registers, and that presents a problem for detection. + * If the i2c transfer is nacked, we may or may not be dealing + * with a type 1 DVI adaptor. Some other mechanism of detecting + * the presence of the adaptor is required. One way would be + * to check the state of the CONFIG1 pin, Another method would + * simply require the driver to know whether the port is a DP++ + * port or a native HDMI port. Both of these methods are entirely + * hardware/driver specific so we can't deal with them here. + */ + ret = drm_dp_dual_mode_read(adapter, DP_DUAL_MODE_HDMI_ID, + hdmi_id, sizeof(hdmi_id)); + if (ret) + return DRM_DP_DUAL_MODE_UNKNOWN; + + /* + * Sigh. Some (maybe all?) type 1 adaptors are broken and ack + * the offset but ignore it, and instead they just always return + * data from the start of the HDMI ID buffer. So for a broken + * type 1 HDMI adaptor a single byte read will always give us + * 0x44, and for a type 1 DVI adaptor it should give 0x00 + * (assuming it implements any registers). Fortunately neither + * of those values will match the type 2 signature of the + * DP_DUAL_MODE_ADAPTOR_ID register so we can proceed with + * the type 2 adaptor detection safely even in the presence + * of broken type 1 adaptors. + */ + ret = drm_dp_dual_mode_read(adapter, DP_DUAL_MODE_ADAPTOR_ID, + &adaptor_id, sizeof(adaptor_id)); + if (ret == 0) { + if (is_type2_adaptor(adaptor_id)) { + if (is_hdmi_adaptor(hdmi_id)) + return DRM_DP_DUAL_MODE_TYPE2_HDMI; + else + return DRM_DP_DUAL_MODE_TYPE2_DVI; + } + } + + if (is_hdmi_adaptor(hdmi_id)) + return DRM_DP_DUAL_MODE_TYPE1_HDMI; + else + return DRM_DP_DUAL_MODE_TYPE1_DVI; +} +EXPORT_SYMBOL(drm_dp_dual_mode_detect); + +/** + * drm_dp_dual_mode_max_tmds_clock - Max TMDS clock for DP dual mode adaptor + * @type: DP dual mode adaptor type + * @adapter: I2C adapter for the DDC bus + * + * Determine the max TMDS clock the adaptor supports based on the + * type of the dual mode adaptor and the DP_DUAL_MODE_MAX_TMDS_CLOCK + * register (on type2 adaptors). As some type 1 adaptors have + * problems with registers (see comments in drm_dp_dual_mode_detect()) + * we don't read the register on those, instead we simply assume + * a 165 MHz limit based on the specification. + * + * Returns: + * Maximum supported TMDS clock rate for the DP dual mode adaptor in kHz. + */ +int drm_dp_dual_mode_max_tmds_clock(enum drm_dp_dual_mode_type type, + struct i2c_adapter *adapter) +{ + uint8_t max_tmds_clock; + ssize_t ret; + + /* native HDMI so no limit */ + if (type == DRM_DP_DUAL_MODE_NONE) + return 0; + + /* + * Type 1 adaptors are limited to 165MHz + * Type 2 adaptors can tells us their limit + */ + if (type < DRM_DP_DUAL_MODE_TYPE2_DVI) + return 165000; + + ret = drm_dp_dual_mode_read(adapter, DP_DUAL_MODE_MAX_TMDS_CLOCK, + &max_tmds_clock, sizeof(max_tmds_clock)); + if (ret || max_tmds_clock == 0x00 || max_tmds_clock == 0xff) { + DRM_DEBUG_KMS("Failed to query max TMDS clock\n"); + return 165000; + } + + return max_tmds_clock * 5000 / 2; +} +EXPORT_SYMBOL(drm_dp_dual_mode_max_tmds_clock); + +/** + * drm_dp_dual_mode_get_tmds_output - Get the state of the TMDS output buffers in the DP dual mode adaptor + * @type: DP dual mode adaptor type + * @adapter: I2C adapter for the DDC bus + * @enabled: current state of the TMDS output buffers + * + * Get the state of the TMDS output buffers in the adaptor. For + * type2 adaptors this is queried from the DP_DUAL_MODE_TMDS_OEN + * register. As some type 1 adaptors have problems with registers + * (see comments in drm_dp_dual_mode_detect()) we don't read the + * register on those, instead we simply assume that the buffers + * are always enabled. + * + * Returns: + * 0 on success, negative error code on failure + */ +int drm_dp_dual_mode_get_tmds_output(enum drm_dp_dual_mode_type type, + struct i2c_adapter *adapter, + bool *enabled) +{ + uint8_t tmds_oen; + ssize_t ret; + + if (type < DRM_DP_DUAL_MODE_TYPE2_DVI) { + *enabled = true; + return 0; + } + + ret = drm_dp_dual_mode_read(adapter, DP_DUAL_MODE_TMDS_OEN, + &tmds_oen, sizeof(tmds_oen)); + if (ret) { + DRM_DEBUG_KMS("Failed to query state of TMDS output buffers\n"); + return ret; + } + + *enabled = !(tmds_oen & DP_DUAL_MODE_TMDS_DISABLE); + + return 0; +} +EXPORT_SYMBOL(drm_dp_dual_mode_get_tmds_output); + +/** + * drm_dp_dual_mode_set_tmds_output - Enable/disable TMDS output buffers in the DP dual mode adaptor + * @type: DP dual mode adaptor type + * @adapter: I2C adapter for the DDC bus + * @enable: enable (as opposed to disable) the TMDS output buffers + * + * Set the state of the TMDS output buffers in the adaptor. For + * type2 this is set via the DP_DUAL_MODE_TMDS_OEN register. As + * some type 1 adaptors have problems with registers (see comments + * in drm_dp_dual_mode_detect()) we avoid touching the register, + * making this function a no-op on type 1 adaptors. + * + * Returns: + * 0 on success, negative error code on failure + */ +int drm_dp_dual_mode_set_tmds_output(enum drm_dp_dual_mode_type type, + struct i2c_adapter *adapter, bool enable) +{ + uint8_t tmds_oen = enable ? 0 : DP_DUAL_MODE_TMDS_DISABLE; + ssize_t ret; + + if (type < DRM_DP_DUAL_MODE_TYPE2_DVI) + return 0; + + ret = drm_dp_dual_mode_write(adapter, DP_DUAL_MODE_TMDS_OEN, + &tmds_oen, sizeof(tmds_oen)); + if (ret) { + DRM_DEBUG_KMS("Failed to %s TMDS output buffers\n", + enable ? "enable" : "disable"); + return ret; + } + + return 0; +} +EXPORT_SYMBOL(drm_dp_dual_mode_set_tmds_output); + +/** + * drm_dp_get_dual_mode_type_name - Get the name of the DP dual mode adaptor type as a string + * @type: DP dual mode adaptor type + * + * Returns: + * String representation of the DP dual mode adaptor type + */ +const char *drm_dp_get_dual_mode_type_name(enum drm_dp_dual_mode_type type) +{ + switch (type) { + case DRM_DP_DUAL_MODE_NONE: + return "none"; + case DRM_DP_DUAL_MODE_TYPE1_DVI: + return "type 1 DVI"; + case DRM_DP_DUAL_MODE_TYPE1_HDMI: + return "type 1 HDMI"; + case DRM_DP_DUAL_MODE_TYPE2_DVI: + return "type 2 DVI"; + case DRM_DP_DUAL_MODE_TYPE2_HDMI: + return "type 2 HDMI"; + default: + WARN_ON(type != DRM_DP_DUAL_MODE_UNKNOWN); + return "unknown"; + } +} +EXPORT_SYMBOL(drm_dp_get_dual_mode_type_name); diff --git a/include/drm/drm_dp_dual_mode_helper.h b/include/drm/drm_dp_dual_mode_helper.h new file mode 100644 index 0000000..e8a9dfd --- /dev/null +++ b/include/drm/drm_dp_dual_mode_helper.h @@ -0,0 +1,92 @@ +/* + * Copyright © 2016 Intel Corporation + * + * Permission is hereby granted, free of charge, to any person obtaining a + * copy of this software and associated documentation files (the "Software"), + * to deal in the Software without restriction, including without limitation + * the rights to use, copy, modify, merge, publish, distribute, sublicense, + * and/or sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following conditions: + * + * The above copyright notice and this permission notice shall be included in + * all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR + * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, + * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL + * THE COPYRIGHT HOLDER(S) OR AUTHOR(S) BE LIABLE FOR ANY CLAIM, DAMAGES OR + * OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, + * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +#ifndef DRM_DP_DUAL_MODE_HELPER_H +#define DRM_DP_DUAL_MODE_HELPER_H + +#include <linux/types.h> + +/* + * Optional for type 1 DVI adaptors + * Mandatory for type 1 HDMI and type 2 adaptors + */ +#define DP_DUAL_MODE_HDMI_ID 0x00 /* 00-0f */ +#define DP_DUAL_MODE_HDMI_ID_LEN 16 +/* + * Optional for type 1 adaptors + * Mandatory for type 2 adaptors + */ +#define DP_DUAL_MODE_ADAPTOR_ID 0x10 +#define DP_DUAL_MODE_REV_MASK 0x07 +#define DP_DUAL_MODE_REV_TYPE2 0x00 +#define DP_DUAL_MODE_TYPE_MASK 0xf0 +#define DP_DUAL_MODE_TYPE_TYPE2 0xa0 +#define DP_DUAL_MODE_IEEE_OUI 0x11 /* 11-13*/ +#define DP_DUAL_IEEE_OUI_LEN 3 +#define DP_DUAL_DEVICE_ID 0x14 /* 14-19 */ +#define DP_DUAL_DEVICE_ID_LEN 6 +#define DP_DUAL_MODE_HARDWARE_REV 0x1a +#define DP_DUAL_MODE_FIRMWARE_MAJOR_REV 0x1b +#define DP_DUAL_MODE_FIRMWARE_MINOR_REV 0x1c +#define DP_DUAL_MODE_MAX_TMDS_CLOCK 0x1d +#define DP_DUAL_MODE_I2C_SPEED_CAP 0x1e +#define DP_DUAL_MODE_TMDS_OEN 0x20 +#define DP_DUAL_MODE_TMDS_DISABLE 0x01 +#define DP_DUAL_MODE_HDMI_PIN_CTRL 0x21 +#define DP_DUAL_MODE_CEC_ENABLE 0x01 +#define DP_DUAL_MODE_I2C_SPEED_CTRL 0x22 + +struct i2c_adapter; + +ssize_t drm_dp_dual_mode_read(struct i2c_adapter *adapter, + u8 offset, void *buffer, size_t size); +ssize_t drm_dp_dual_mode_write(struct i2c_adapter *adapter, + u8 offset, const void *buffer, size_t size); + +/** + * enum drm_dp_dual_mode_type - Type of the DP dual mode adaptor + * @DRM_DP_DUAL_MODE_NONE: No DP dual mode adaptor + * @DRM_DP_DUAL_MODE_UNKNOWN: Could be either none or type 1 DVI adaptor + * @DRM_DP_DUAL_MODE_TYPE1_DVI: Type 1 DVI adaptor + * @DRM_DP_DUAL_MODE_TYPE1_HDMI: Type 1 HDMI adaptor + * @DRM_DP_DUAL_MODE_TYPE2_DVI: Type 2 DVI adaptor + * @DRM_DP_DUAL_MODE_TYPE2_HDMI: Type 2 HDMI adaptor + */ +enum drm_dp_dual_mode_type { + DRM_DP_DUAL_MODE_NONE, + DRM_DP_DUAL_MODE_UNKNOWN, + DRM_DP_DUAL_MODE_TYPE1_DVI, + DRM_DP_DUAL_MODE_TYPE1_HDMI, + DRM_DP_DUAL_MODE_TYPE2_DVI, + DRM_DP_DUAL_MODE_TYPE2_HDMI, +}; + +enum drm_dp_dual_mode_type drm_dp_dual_mode_detect(struct i2c_adapter *adapter); +int drm_dp_dual_mode_max_tmds_clock(enum drm_dp_dual_mode_type type, + struct i2c_adapter *adapter); +int drm_dp_dual_mode_get_tmds_output(enum drm_dp_dual_mode_type type, + struct i2c_adapter *adapter, bool *enabled); +int drm_dp_dual_mode_set_tmds_output(enum drm_dp_dual_mode_type type, + struct i2c_adapter *adapter, bool enable); +const char *drm_dp_get_dual_mode_type_name(enum drm_dp_dual_mode_type type); + +#endif |