summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/arm/Kconfig.debug328
1 files changed, 191 insertions, 137 deletions
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug
index 6e03229..9064ed4 100644
--- a/arch/arm/Kconfig.debug
+++ b/arch/arm/Kconfig.debug
@@ -376,12 +376,72 @@ choice
Say Y here if you want kernel low-level debugging support
on TI-NSPIRE CX models.
- config DEBUG_OMAP2PLUS_UART
- bool "Kernel low-level debugging messages via OMAP2PLUS UART"
+ config DEBUG_OMAP2UART1
+ bool "OMAP2/3/4 UART1 (omap2/3 sdp boards and some omap3 boards)"
depends on ARCH_OMAP2PLUS
+ select DEBUG_OMAP2PLUS_UART
help
- Say Y here if you want kernel low-level debugging support
- on OMAP2PLUS based platforms.
+ This covers at least h4, 2430sdp, 3430sdp, 3630sdp,
+ omap3 torpedo and 3530 lv som.
+
+ config DEBUG_OMAP2UART2
+ bool "Kernel low-level debugging messages via OMAP2/3/4 UART2"
+ depends on ARCH_OMAP2PLUS
+ select DEBUG_OMAP2PLUS_UART
+
+ config DEBUG_OMAP2UART3
+ bool "Kernel low-level debugging messages via OMAP2 UART3 (n8x0)"
+ depends on ARCH_OMAP2PLUS
+ select DEBUG_OMAP2PLUS_UART
+
+ config DEBUG_OMAP3UART3
+ bool "Kernel low-level debugging messages via OMAP3 UART3 (most omap3 boards)"
+ depends on ARCH_OMAP2PLUS
+ select DEBUG_OMAP2PLUS_UART
+ help
+ This covers at least cm_t3x, beagle, crane, devkit8000,
+ igep00x0, ldp, n900, n9(50), pandora, overo, touchbook,
+ and 3517evm.
+
+ config DEBUG_OMAP4UART3
+ bool "Kernel low-level debugging messages via OMAP4/5 UART3 (omap4 blaze, panda, omap5 sevm)"
+ depends on ARCH_OMAP2PLUS
+ select DEBUG_OMAP2PLUS_UART
+
+ config DEBUG_OMAP3UART4
+ bool "Kernel low-level debugging messages via OMAP36XX UART4"
+ depends on ARCH_OMAP2PLUS
+ select DEBUG_OMAP2PLUS_UART
+
+ config DEBUG_OMAP4UART4
+ bool "Kernel low-level debugging messages via OMAP4/5 UART4"
+ depends on ARCH_OMAP2PLUS
+ select DEBUG_OMAP2PLUS_UART
+
+ config DEBUG_TI81XXUART1
+ bool "Kernel low-level debugging messages via TI81XX UART1 (ti8148evm)"
+ depends on ARCH_OMAP2PLUS
+ select DEBUG_OMAP2PLUS_UART
+
+ config DEBUG_TI81XXUART2
+ bool "Kernel low-level debugging messages via TI81XX UART2"
+ depends on ARCH_OMAP2PLUS
+ select DEBUG_OMAP2PLUS_UART
+
+ config DEBUG_TI81XXUART3
+ bool "Kernel low-level debugging messages via TI81XX UART3 (ti8168evm)"
+ depends on ARCH_OMAP2PLUS
+ select DEBUG_OMAP2PLUS_UART
+
+ config DEBUG_AM33XXUART1
+ bool "Kernel low-level debugging messages via AM33XX UART1"
+ depends on ARCH_OMAP2PLUS
+ select DEBUG_OMAP2PLUS_UART
+
+ config DEBUG_ZOOM_UART
+ bool "Kernel low-level debugging messages via Zoom2/3 UART"
+ depends on ARCH_OMAP2PLUS
+ select DEBUG_OMAP2PLUS_UART
config DEBUG_PICOXCELL_UART
depends on ARCH_PICOXCELL
@@ -413,9 +473,58 @@ choice
their output to the standard serial port on the RealView
PB1176 platform.
- config DEBUG_ROCKCHIP_UART
- bool "Kernel low-level debugging messages via Rockchip UART"
+ config DEBUG_RK29_UART0
+ bool "Kernel low-level debugging messages via Rockchip RK29 UART0"
+ depends on ARCH_ROCKCHIP
+ select DEBUG_ROCKCHIP_UART
+ help
+ Say Y here if you want kernel low-level debugging support
+ on Rockchip based platforms.
+
+ config DEBUG_RK29_UART1
+ bool "Kernel low-level debugging messages via Rockchip RK29 UART1"
+ depends on ARCH_ROCKCHIP
+ select DEBUG_ROCKCHIP_UART
+ help
+ Say Y here if you want kernel low-level debugging support
+ on Rockchip based platforms.
+
+ config DEBUG_RK29_UART2
+ bool "Kernel low-level debugging messages via Rockchip RK29 UART2"
+ depends on ARCH_ROCKCHIP
+ select DEBUG_ROCKCHIP_UART
+ help
+ Say Y here if you want kernel low-level debugging support
+ on Rockchip based platforms.
+
+ config DEBUG_RK3X_UART0
+ bool "Kernel low-level debugging messages via Rockchip RK3X UART0"
+ depends on ARCH_ROCKCHIP
+ select DEBUG_ROCKCHIP_UART
+ help
+ Say Y here if you want kernel low-level debugging support
+ on Rockchip based platforms.
+
+ config DEBUG_RK3X_UART1
+ bool "Kernel low-level debugging messages via Rockchip RK3X UART1"
depends on ARCH_ROCKCHIP
+ select DEBUG_ROCKCHIP_UART
+ help
+ Say Y here if you want kernel low-level debugging support
+ on Rockchip based platforms.
+
+ config DEBUG_RK3X_UART2
+ bool "Kernel low-level debugging messages via Rockchip RK3X UART2"
+ depends on ARCH_ROCKCHIP
+ select DEBUG_ROCKCHIP_UART
+ help
+ Say Y here if you want kernel low-level debugging support
+ on Rockchip based platforms.
+
+ config DEBUG_RK3X_UART3
+ bool "Kernel low-level debugging messages via Rockchip RK3X UART3"
+ depends on ARCH_ROCKCHIP
+ select DEBUG_ROCKCHIP_UART
help
Say Y here if you want kernel low-level debugging support
on Rockchip based platforms.
@@ -489,9 +598,54 @@ choice
Say Y here if you want kernel low-level debugging support
on Allwinner A1X based platforms on the UART1.
- config DEBUG_TEGRA_UART
+ config TEGRA_DEBUG_UART_AUTO_ODMDATA
+ bool "Kernel low-level debugging messages via Tegra UART via ODMDATA"
depends on ARCH_TEGRA
- bool "Use Tegra UART for low-level debug"
+ select DEBUG_TEGRA_UART
+ help
+ Automatically determines which UART to use for low-level
+ debug based on the ODMDATA value. This value is part of
+ the BCT, and is written to the boot memory device using
+ nvflash, or other flashing tool. When bits 19:18 are 3,
+ then bits 17:15 indicate which UART to use; 0/1/2/3/4
+ are UART A/B/C/D/E.
+
+ config TEGRA_DEBUG_UARTA
+ bool "Kernel low-level debugging messages via Tegra UART A"
+ depends on ARCH_TEGRA
+ select DEBUG_TEGRA_UART
+ help
+ Say Y here if you want kernel low-level debugging support
+ on Tegra based platforms.
+
+ config TEGRA_DEBUG_UARTB
+ bool "Kernel low-level debugging messages via Tegra UART B"
+ depends on ARCH_TEGRA
+ select DEBUG_TEGRA_UART
+ help
+ Say Y here if you want kernel low-level debugging support
+ on Tegra based platforms.
+
+ config TEGRA_DEBUG_UARTC
+ bool "Kernel low-level debugging messages via Tegra UART C"
+ depends on ARCH_TEGRA
+ select DEBUG_TEGRA_UART
+ help
+ Say Y here if you want kernel low-level debugging support
+ on Tegra based platforms.
+
+ config TEGRA_DEBUG_UARTD
+ bool "Kernel low-level debugging messages via Tegra UART D"
+ depends on ARCH_TEGRA
+ select DEBUG_TEGRA_UART
+ help
+ Say Y here if you want kernel low-level debugging support
+ on Tegra based platforms.
+
+ config TEGRA_DEBUG_UARTE
+ bool "Kernel low-level debugging messages via Tegra UART E"
+ depends on ARCH_TEGRA
+ select DEBUG_TEGRA_UART
help
Say Y here if you want kernel low-level debugging support
on Tegra based platforms.
@@ -510,13 +664,25 @@ choice
Say Y here if you want the debug print routines to direct
their output to the uart1 port on SiRFmarco devices.
- config DEBUG_STI_UART
+ config STIH41X_DEBUG_ASC2
+ bool "Use StiH415/416 ASC2 UART for low-level debug"
+ depends on ARCH_STI
+ select DEBUG_STI_UART
+ help
+ Say Y here if you want kernel low-level debugging support
+ on STiH415/416 based platforms like b2000, which has
+ default UART wired up to ASC2.
+
+ If unsure, say N.
+
+ config STIH41X_DEBUG_SBC_ASC1
+ bool "Use StiH415/416 SBC ASC1 UART for low-level debug"
depends on ARCH_STI
- bool "Use StiH415/416 ASC for low-level debug"
+ select DEBUG_STI_UART
help
Say Y here if you want kernel low-level debugging support
- on StiH415/416 based platforms like B2000, B2020.
- It support UART2 and SBC_UART1.
+ on STiH415/416 based platforms like b2020. which has
+ default UART wired up to SBC ASC1.
If unsure, say N.
@@ -615,6 +781,10 @@ endchoice
config DEBUG_EXYNOS_UART
bool
+config DEBUG_OMAP2PLUS_UART
+ bool
+ depends on ARCH_OMAP2PLUS
+
config DEBUG_IMX_UART_PORT
int "i.MX Debug UART Port Selection" if DEBUG_IMX1_UART || \
DEBUG_IMX25_UART || \
@@ -631,133 +801,17 @@ config DEBUG_IMX_UART_PORT
Choose UART port on which kernel low-level debug messages
should be output.
-choice
- prompt "Low-level debug console UART"
- depends on DEBUG_OMAP2PLUS_UART
-
- config DEBUG_OMAP2UART1
- bool "OMAP2/3/4 UART1 (omap2/3 sdp boards and some omap3 boards)"
- help
- This covers at least h4, 2430sdp, 3430sdp, 3630sdp,
- omap3 torpedo and 3530 lv som.
-
- config DEBUG_OMAP2UART2
- bool "OMAP2/3/4 UART2"
-
- config DEBUG_OMAP2UART3
- bool "OMAP2 UART3 (n8x0)"
-
- config DEBUG_OMAP3UART3
- bool "OMAP3 UART3 (most omap3 boards)"
- help
- This covers at least cm_t3x, beagle, crane, devkit8000,
- igep00x0, ldp, n900, n9(50), pandora, overo, touchbook,
- and 3517evm.
-
- config DEBUG_OMAP4UART3
- bool "OMAP4/5 UART3 (omap4 blaze, panda, omap5 sevm)"
-
- config DEBUG_OMAP3UART4
- bool "OMAP36XX UART4"
-
- config DEBUG_OMAP4UART4
- bool "OMAP4/5 UART4"
-
- config DEBUG_TI81XXUART1
- bool "TI81XX UART1 (ti8148evm)"
-
- config DEBUG_TI81XXUART2
- bool "TI81XX UART2"
-
- config DEBUG_TI81XXUART3
- bool "TI81XX UART3 (ti8168evm)"
-
- config DEBUG_AM33XXUART1
- bool "AM33XX UART1"
-
- config DEBUG_ZOOM_UART
- bool "Zoom2/3 UART"
-endchoice
-
-choice
- prompt "Low-level debug console UART"
- depends on DEBUG_ROCKCHIP_UART
-
- config DEBUG_RK29_UART0
- bool "RK29 UART0"
-
- config DEBUG_RK29_UART1
- bool "RK29 UART1"
-
- config DEBUG_RK29_UART2
- bool "RK29 UART2"
-
- config DEBUG_RK3X_UART0
- bool "RK3X UART0"
-
- config DEBUG_RK3X_UART1
- bool "RK3X UART1"
-
- config DEBUG_RK3X_UART2
- bool "RK3X UART2"
-
- config DEBUG_RK3X_UART3
- bool "RK3X UART3"
-endchoice
-
-choice
- prompt "Low-level debug console UART"
- depends on DEBUG_LL && DEBUG_TEGRA_UART
-
- config TEGRA_DEBUG_UART_AUTO_ODMDATA
- bool "Via ODMDATA"
- help
- Automatically determines which UART to use for low-level debug based
- on the ODMDATA value. This value is part of the BCT, and is written
- to the boot memory device using nvflash, or other flashing tool.
- When bits 19:18 are 3, then bits 17:15 indicate which UART to use;
- 0/1/2/3/4 are UART A/B/C/D/E.
-
- config TEGRA_DEBUG_UARTA
- bool "UART A"
-
- config TEGRA_DEBUG_UARTB
- bool "UART B"
-
- config TEGRA_DEBUG_UARTC
- bool "UART C"
-
- config TEGRA_DEBUG_UARTD
- bool "UART D"
-
- config TEGRA_DEBUG_UARTE
- bool "UART E"
-
-endchoice
-
-choice
- prompt "Low-level debug console UART"
- depends on DEBUG_LL && DEBUG_STI_UART
-
- config STIH41X_DEBUG_ASC2
- bool "ASC2 UART"
- help
- Say Y here if you want kernel low-level debugging support
- on STiH415/416 based platforms like b2000, which has
- default UART wired up to ASC2.
-
- If unsure, say N.
-
- config STIH41X_DEBUG_SBC_ASC1
- bool "SBC ASC1 UART"
- help
- Say Y here if you want kernel low-level debugging support
- on STiH415/416 based platforms like b2020. which has
- default UART wired up to SBC ASC1.
+config DEBUG_ROCKCHIP_UART
+ bool
+ depends on ARCH_ROCKCHIP
- If unsure, say N.
+config DEBUG_TEGRA_UART
+ bool
+ depends on ARCH_TEGRA
-endchoice
+config DEBUG_STI_UART
+ bool
+ depends on ARCH_STI
config DEBUG_LL_INCLUDE
string