diff options
-rw-r--r-- | drivers/regulator/Makefile | 2 | ||||
-rw-r--r-- | drivers/regulator/ab8500-ext.c | 394 | ||||
-rw-r--r-- | drivers/regulator/ab8500.c | 12 | ||||
-rw-r--r-- | include/linux/regulator/ab8500.h | 28 |
4 files changed, 434 insertions, 2 deletions
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile index 6e82503..47a34ff 100644 --- a/drivers/regulator/Makefile +++ b/drivers/regulator/Makefile @@ -12,7 +12,7 @@ obj-$(CONFIG_REGULATOR_USERSPACE_CONSUMER) += userspace-consumer.o obj-$(CONFIG_REGULATOR_88PM8607) += 88pm8607.o obj-$(CONFIG_REGULATOR_AAT2870) += aat2870-regulator.o obj-$(CONFIG_REGULATOR_AB3100) += ab3100.o -obj-$(CONFIG_REGULATOR_AB8500) += ab8500.o +obj-$(CONFIG_REGULATOR_AB8500) += ab8500.o ab8500-ext.o obj-$(CONFIG_REGULATOR_AD5398) += ad5398.o obj-$(CONFIG_REGULATOR_ANATOP) += anatop-regulator.o obj-$(CONFIG_REGULATOR_ARIZONA) += arizona-micsupp.o arizona-ldo1.o diff --git a/drivers/regulator/ab8500-ext.c b/drivers/regulator/ab8500-ext.c new file mode 100644 index 0000000..95008de --- /dev/null +++ b/drivers/regulator/ab8500-ext.c @@ -0,0 +1,394 @@ +/* + * Copyright (C) ST-Ericsson SA 2010 + * + * License Terms: GNU General Public License v2 + * + * Authors: Bengt Jonsson <bengt.g.jonsson@stericsson.com> + * + * This file is based on drivers/regulator/ab8500.c + * + * AB8500 external regulators + * + * ab8500-ext supports the following regulators: + * - VextSupply3 + */ +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/err.h> +#include <linux/module.h> +#include <linux/platform_device.h> +#include <linux/regulator/driver.h> +#include <linux/regulator/machine.h> +#include <linux/mfd/abx500.h> +#include <linux/mfd/abx500/ab8500.h> +#include <linux/regulator/ab8500.h> + +/** + * struct ab8500_ext_regulator_info - ab8500 regulator information + * @dev: device pointer + * @desc: regulator description + * @rdev: regulator device + * @is_enabled: status of regulator (on/off) + * @update_bank: bank to control on/off + * @update_reg: register to control on/off + * @update_mask: mask to enable/disable and set mode of regulator + * @update_val: bits holding the regulator current mode + * @update_val_en: bits to set EN pin active (LPn pin deactive) + * normally this means high power mode + * @update_val_en_lp: bits to set EN pin active and LPn pin active + * normally this means low power mode + * @delay: startup delay in ms + */ +struct ab8500_ext_regulator_info { + struct device *dev; + struct regulator_desc desc; + struct regulator_dev *rdev; + bool is_enabled; + u8 update_bank; + u8 update_reg; + u8 update_mask; + u8 update_val; + u8 update_val_en; + u8 update_val_en_lp; +}; + +static int ab8500_ext_regulator_enable(struct regulator_dev *rdev) +{ + int ret; + struct ab8500_ext_regulator_info *info = rdev_get_drvdata(rdev); + + if (info == NULL) { + dev_err(rdev_get_dev(rdev), "regulator info null pointer\n"); + return -EINVAL; + } + + ret = abx500_mask_and_set_register_interruptible(info->dev, + info->update_bank, info->update_reg, + info->update_mask, info->update_val); + if (ret < 0) + dev_err(rdev_get_dev(info->rdev), + "couldn't set enable bits for regulator\n"); + + info->is_enabled = true; + + dev_dbg(rdev_get_dev(rdev), "%s-enable (bank, reg, mask, value):" + " 0x%02x, 0x%02x, 0x%02x, 0x%02x\n", + info->desc.name, info->update_bank, info->update_reg, + info->update_mask, info->update_val); + + return ret; +} + +static int ab8500_ext_regulator_disable(struct regulator_dev *rdev) +{ + int ret; + struct ab8500_ext_regulator_info *info = rdev_get_drvdata(rdev); + + if (info == NULL) { + dev_err(rdev_get_dev(rdev), "regulator info null pointer\n"); + return -EINVAL; + } + + ret = abx500_mask_and_set_register_interruptible(info->dev, + info->update_bank, info->update_reg, + info->update_mask, 0x0); + if (ret < 0) + dev_err(rdev_get_dev(info->rdev), + "couldn't set disable bits for regulator\n"); + + info->is_enabled = false; + + dev_dbg(rdev_get_dev(rdev), "%s-disable (bank, reg, mask, value):" + " 0x%02x, 0x%02x, 0x%02x, 0x%02x\n", + info->desc.name, info->update_bank, info->update_reg, + info->update_mask, 0x0); + + return ret; +} + +static int ab8500_ext_regulator_is_enabled(struct regulator_dev *rdev) +{ + int ret; + struct ab8500_ext_regulator_info *info = rdev_get_drvdata(rdev); + u8 regval; + + if (info == NULL) { + dev_err(rdev_get_dev(rdev), "regulator info null pointer\n"); + return -EINVAL; + } + + ret = abx500_get_register_interruptible(info->dev, + info->update_bank, info->update_reg, ®val); + if (ret < 0) { + dev_err(rdev_get_dev(rdev), + "couldn't read 0x%x register\n", info->update_reg); + return ret; + } + + dev_dbg(rdev_get_dev(rdev), "%s-is_enabled (bank, reg, mask, value):" + " 0x%02x, 0x%02x, 0x%02x, 0x%02x\n", + info->desc.name, info->update_bank, info->update_reg, + info->update_mask, regval); + + if (regval & info->update_mask) + info->is_enabled = true; + else + info->is_enabled = false; + + return info->is_enabled; +} + +static int ab8500_ext_regulator_set_mode(struct regulator_dev *rdev, + unsigned int mode) +{ + int ret = 0; + struct ab8500_ext_regulator_info *info = rdev_get_drvdata(rdev); + + if (info == NULL) { + dev_err(rdev_get_dev(rdev), "regulator info null pointer\n"); + return -EINVAL; + } + + switch (mode) { + case REGULATOR_MODE_NORMAL: + info->update_val = info->update_val_hp; + break; + case REGULATOR_MODE_IDLE: + info->update_val = info->update_val_lp; + break; + + default: + return -EINVAL; + } + + if (info->is_enabled) { + u8 regval; + + ret = enable(info, ®val); + if (ret < 0) + dev_err(rdev_get_dev(rdev), + "Could not set regulator mode.\n"); + + dev_dbg(rdev_get_dev(rdev), + "%s-set_mode (bank, reg, mask, value): " + "0x%x, 0x%x, 0x%x, 0x%x\n", + info->desc.name, info->update_bank, info->update_reg, + info->update_mask, regval); + } + + return ret; +} + +static unsigned int ab8500_ext_regulator_get_mode(struct regulator_dev *rdev) +{ + struct ab8500_ext_regulator_info *info = rdev_get_drvdata(rdev); + int ret; + + if (info == NULL) { + dev_err(rdev_get_dev(rdev), "regulator info null pointer\n"); + return -EINVAL; + } + + if (info->update_val == info->update_val_hp) + ret = REGULATOR_MODE_NORMAL; + else if (info->update_val == info->update_val_lp) + ret = REGULATOR_MODE_IDLE; + else + ret = -EINVAL; + + return ret; +} + +static int ab8500_ext_fixed_get_voltage(struct regulator_dev *rdev) +{ + struct regulation_constraints *regu_constraints = rdev->constraints; + + if (regu_constraints == NULL) { + dev_err(rdev_get_dev(rdev), "regulator constraints null pointer\n"); + return -EINVAL; + } + if (regu_constraints->min_uV && regu_constraints->max_uV) { + if (regu_constraints->min_uV == regu_constraints->max_uV) + return regu_constraints->min_uV; + } + return -EINVAL; +} + +static int ab8500_ext_list_voltage(struct regulator_dev *rdev, + unsigned selector) +{ + struct regulation_constraints *regu_constraints = rdev->constraints; + + if (regu_constraints == NULL) { + dev_err(rdev_get_dev(rdev), "regulator constraints null pointer\n"); + return -EINVAL; + } + /* return the uV for the fixed regulators */ + if (regu_constraints->min_uV && regu_constraints->max_uV) { + if (regu_constraints->min_uV == regu_constraints->max_uV) + return regu_constraints->min_uV; + } + return -EINVAL; +} + +static struct regulator_ops ab8500_ext_regulator_ops = { + .enable = ab8500_ext_regulator_enable, + .disable = ab8500_ext_regulator_disable, + .is_enabled = ab8500_ext_regulator_is_enabled, + .set_mode = ab8500_ext_regulator_set_mode, + .get_mode = ab8500_ext_regulator_get_mode, + .get_voltage = ab8500_ext_fixed_get_voltage, + .list_voltage = ab8500_ext_list_voltage, +}; + + +static struct ab8500_ext_regulator_info + ab8500_ext_regulator_info[AB8500_NUM_EXT_REGULATORS] = { + [AB8500_EXT_SUPPLY1] = { + .desc = { + .name = "VEXTSUPPLY1", + .ops = &ab8500_ext_regulator_ops, + .type = REGULATOR_VOLTAGE, + .id = AB8500_EXT_SUPPLY1, + .owner = THIS_MODULE, + .n_voltages = 1, + }, + .update_bank = 0x04, + .update_reg = 0x08, + .update_mask = 0x03, + .update_val = 0x01, + .update_val_hp = 0x01, + .update_val_lp = 0x03, + .update_val_hw = 0x02, + }, + [AB8500_EXT_SUPPLY2] = { + .desc = { + .name = "VEXTSUPPLY2", + .ops = &ab8500_ext_regulator_ops, + .type = REGULATOR_VOLTAGE, + .id = AB8500_EXT_SUPPLY2, + .owner = THIS_MODULE, + .n_voltages = 1, + }, + .update_bank = 0x04, + .update_reg = 0x08, + .update_mask = 0x0c, + .update_val = 0x04, + .update_val_hp = 0x04, + .update_val_lp = 0x0c, + .update_val_hw = 0x08, + }, + [AB8500_EXT_SUPPLY3] = { + .desc = { + .name = "VEXTSUPPLY3", + .ops = &ab8500_ext_regulator_ops, + .type = REGULATOR_VOLTAGE, + .id = AB8500_EXT_SUPPLY3, + .owner = THIS_MODULE, + .n_voltages = 1, + }, + .update_bank = 0x04, + .update_reg = 0x08, + .update_mask = 0x30, + .update_val = 0x10, + .update_val_en = 0x10, + .update_val_en_lp = 0x30, + }, +}; + +int ab8500_ext_regulator_init(struct platform_device *pdev) +{ + struct ab8500 *ab8500 = dev_get_drvdata(pdev->dev.parent); + struct ab8500_platform_data *ppdata; + struct ab8500_regulator_platform_data *pdata; + struct regulator_config config = { }; + int i, err; + + if (!ab8500) { + dev_err(&pdev->dev, "null mfd parent\n"); + return -EINVAL; + } + ppdata = dev_get_platdata(ab8500->dev); + if (!ppdata) { + dev_err(&pdev->dev, "null parent pdata\n"); + return -EINVAL; + } + + pdata = ppdata->regulator; + if (!pdata) { + dev_err(&pdev->dev, "null pdata\n"); + return -EINVAL; + } + + /* make sure the platform data has the correct size */ + if (pdata->num_ext_regulator != ARRAY_SIZE(ab8500_ext_regulator_info)) { + dev_err(&pdev->dev, "Configuration error: size mismatch.\n"); + return -EINVAL; + } + + /* check for AB8500 2.x */ + if (abx500_get_chip_id(&pdev->dev) < 0x30) { + struct ab8500_ext_regulator_info *info; + + /* VextSupply3LPn is inverted on AB8500 2.x */ + info = &ab8500_ext_regulator_info[AB8500_EXT_SUPPLY3]; + info->update_val = 0x30; + info->update_val_en = 0x30; + info->update_val_en_lp = 0x10; + } + + /* register all regulators */ + for (i = 0; i < ARRAY_SIZE(ab8500_ext_regulator_info); i++) { + struct ab8500_ext_regulator_info *info = NULL; + + /* assign per-regulator data */ + info = &ab8500_ext_regulator_info[i]; + info->dev = &pdev->dev; + + config.dev = &pdev->dev; + config.init_data = &pdata->ext_regulator[i]; + config.driver_data = info; + + /* register regulator with framework */ + info->rdev = regulator_register(&info->desc, &config); + + if (IS_ERR(info->rdev)) { + err = PTR_ERR(info->rdev); + dev_err(&pdev->dev, "failed to register regulator %s\n", + info->desc.name); + /* when we fail, un-register all earlier regulators */ + while (--i >= 0) { + info = &ab8500_ext_regulator_info[i]; + regulator_unregister(info->rdev); + } + return err; + } + + dev_dbg(rdev_get_dev(info->rdev), + "%s-probed\n", info->desc.name); + } + + return 0; +} + +int ab8500_ext_regulator_exit(struct platform_device *pdev) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(ab8500_ext_regulator_info); i++) { + struct ab8500_ext_regulator_info *info = NULL; + info = &ab8500_ext_regulator_info[i]; + + dev_vdbg(rdev_get_dev(info->rdev), + "%s-remove\n", info->desc.name); + + regulator_unregister(info->rdev); + } + + return 0; +} + +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Bengt Jonsson <bengt.g.jonsson@stericsson.com>"); +MODULE_DESCRIPTION("AB8500 external regulator driver"); +MODULE_ALIAS("platform:ab8500-ext-regulator"); diff --git a/drivers/regulator/ab8500.c b/drivers/regulator/ab8500.c index 3a18966..4974688 100644 --- a/drivers/regulator/ab8500.c +++ b/drivers/regulator/ab8500.c @@ -947,6 +947,11 @@ static int ab8500_regulator_probe(struct platform_device *pdev) return err; } + /* register external regulators (before Vaux1, 2 and 3) */ + err = ab8500_ext_regulator_init(pdev); + if (err) + return err; + /* register all regulators */ for (i = 0; i < ARRAY_SIZE(ab8500_regulator_info); i++) { err = ab8500_regulator_register(pdev, &pdata->regulator[i], i, NULL); @@ -959,7 +964,7 @@ static int ab8500_regulator_probe(struct platform_device *pdev) static int ab8500_regulator_remove(struct platform_device *pdev) { - int i; + int i, err; for (i = 0; i < ARRAY_SIZE(ab8500_regulator_info); i++) { struct ab8500_regulator_info *info = NULL; @@ -971,6 +976,11 @@ static int ab8500_regulator_remove(struct platform_device *pdev) regulator_unregister(info->regulator); } + /* remove external regulators (after Vaux1, 2 and 3) */ + err = ab8500_ext_regulator_exit(pdev); + if (err) + return err; + return 0; } diff --git a/include/linux/regulator/ab8500.h b/include/linux/regulator/ab8500.h index 26792ff..4e92e5b 100644 --- a/include/linux/regulator/ab8500.h +++ b/include/linux/regulator/ab8500.h @@ -10,6 +10,8 @@ #ifndef __LINUX_MFD_AB8500_REGULATOR_H #define __LINUX_MFD_AB8500_REGULATOR_H +#include <linux/platform_device.h> + /* AB8500 regulators */ enum ab8500_regulator_id { AB8500_LDO_AUX1, @@ -140,11 +142,37 @@ enum ab9540_regulator_reg { AB9540_NUM_REGULATOR_REGISTERS, }; +/* AB8500 external regulators */ +enum ab8500_ext_regulator_id { + AB8500_EXT_SUPPLY1, + AB8500_EXT_SUPPLY2, + AB8500_EXT_SUPPLY3, + AB8500_NUM_EXT_REGULATORS, +}; + +/* AB8500 regulator platform data */ struct ab8500_regulator_platform_data { int num_reg_init; struct ab8500_regulator_reg_init *reg_init; int num_regulator; struct regulator_init_data *regulator; + int num_ext_regulator; + struct regulator_init_data *ext_regulator; }; +/* AB8500 external regulator functions (internal) */ +#ifdef CONFIG_REGULATOR_AB8500_EXT +int ab8500_ext_regulator_init(struct platform_device *pdev); +int ab8500_ext_regulator_exit(struct platform_device *pdev); +#else +inline int ab8500_ext_regulator_init(struct platform_device *pdev) +{ + return 0; +} +inline int ab8500_ext_regulator_exit(struct platform_device *pdev) +{ + return 0; +} +#endif + #endif |