summaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/mips/Kconfig18
-rw-r--r--arch/mips/Makefile7
-rw-r--r--arch/mips/basler/excite/Kconfig9
-rw-r--r--arch/mips/basler/excite/Makefile8
-rw-r--r--arch/mips/basler/excite/excite_device.c403
-rw-r--r--arch/mips/basler/excite/excite_iodev.c178
-rw-r--r--arch/mips/basler/excite/excite_iodev.h10
-rw-r--r--arch/mips/basler/excite/excite_irq.c122
-rw-r--r--arch/mips/basler/excite/excite_procfs.c92
-rw-r--r--arch/mips/basler/excite/excite_prom.c144
-rw-r--r--arch/mips/basler/excite/excite_setup.c302
-rw-r--r--arch/mips/configs/ar7_defconfig1
-rw-r--r--arch/mips/configs/bcm47xx_defconfig1
-rw-r--r--arch/mips/configs/bcm63xx_defconfig1
-rw-r--r--arch/mips/configs/bigsur_defconfig1
-rw-r--r--arch/mips/configs/capcella_defconfig1
-rw-r--r--arch/mips/configs/cavium-octeon_defconfig1
-rw-r--r--arch/mips/configs/cobalt_defconfig1
-rw-r--r--arch/mips/configs/db1000_defconfig1
-rw-r--r--arch/mips/configs/db1100_defconfig1
-rw-r--r--arch/mips/configs/db1200_defconfig1
-rw-r--r--arch/mips/configs/db1500_defconfig1
-rw-r--r--arch/mips/configs/db1550_defconfig1
-rw-r--r--arch/mips/configs/decstation_defconfig1
-rw-r--r--arch/mips/configs/e55_defconfig1
-rw-r--r--arch/mips/configs/excite_defconfig1335
-rw-r--r--arch/mips/configs/fuloong2e_defconfig1
-rw-r--r--arch/mips/configs/ip22_defconfig1
-rw-r--r--arch/mips/configs/ip27_defconfig1
-rw-r--r--arch/mips/configs/ip28_defconfig1
-rw-r--r--arch/mips/configs/ip32_defconfig1
-rw-r--r--arch/mips/configs/jazz_defconfig1
-rw-r--r--arch/mips/configs/jmr3927_defconfig1
-rw-r--r--arch/mips/configs/lasat_defconfig1
-rw-r--r--arch/mips/configs/lemote2f_defconfig1
-rw-r--r--arch/mips/configs/malta_defconfig1
-rw-r--r--arch/mips/configs/markeins_defconfig1
-rw-r--r--arch/mips/configs/mipssim_defconfig1
-rw-r--r--arch/mips/configs/mpc30x_defconfig1
-rw-r--r--arch/mips/configs/msp71xx_defconfig1
-rw-r--r--arch/mips/configs/mtx1_defconfig1
-rw-r--r--arch/mips/configs/pb1100_defconfig1
-rw-r--r--arch/mips/configs/pb1500_defconfig1
-rw-r--r--arch/mips/configs/pb1550_defconfig1
-rw-r--r--arch/mips/configs/pnx8335-stb225_defconfig1
-rw-r--r--arch/mips/configs/pnx8550-jbs_defconfig1
-rw-r--r--arch/mips/configs/pnx8550-stb810_defconfig1
-rw-r--r--arch/mips/configs/powertv_defconfig1
-rw-r--r--arch/mips/configs/rb532_defconfig1
-rw-r--r--arch/mips/configs/rbtx49xx_defconfig1
-rw-r--r--arch/mips/configs/rm200_defconfig1
-rw-r--r--arch/mips/configs/sb1250-swarm_defconfig1
-rw-r--r--arch/mips/configs/tb0219_defconfig1
-rw-r--r--arch/mips/configs/tb0226_defconfig1
-rw-r--r--arch/mips/configs/tb0287_defconfig1
-rw-r--r--arch/mips/configs/workpad_defconfig1
-rw-r--r--arch/mips/configs/wrppmc_defconfig1
-rw-r--r--arch/mips/configs/yosemite_defconfig1
-rw-r--r--arch/mips/include/asm/mach-excite/cpu-feature-overrides.h48
-rw-r--r--arch/mips/include/asm/mach-excite/excite.h154
-rw-r--r--arch/mips/include/asm/mach-excite/excite_fpga.h80
-rw-r--r--arch/mips/include/asm/mach-excite/excite_nandflash.h7
-rw-r--r--arch/mips/include/asm/mach-excite/rm9k_eth.h23
-rw-r--r--arch/mips/include/asm/mach-excite/rm9k_wdt.h12
-rw-r--r--arch/mips/include/asm/mach-excite/rm9k_xicap.h16
-rw-r--r--arch/mips/include/asm/mach-excite/war.h25
-rw-r--r--arch/mips/pci/Makefile1
-rw-r--r--arch/mips/pci/fixup-excite.c36
-rw-r--r--arch/mips/pci/pci-excite.c149
-rw-r--r--drivers/mtd/nand/Kconfig8
-rw-r--r--drivers/mtd/nand/Makefile1
-rw-r--r--drivers/mtd/nand/excite_nandflash.c248
-rw-r--r--drivers/watchdog/Kconfig10
-rw-r--r--drivers/watchdog/Makefile1
-rw-r--r--drivers/watchdog/rm9k_wdt.c419
75 files changed, 0 insertions, 3912 deletions
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 0be245d..f374cca 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -50,23 +50,6 @@ config AR7
Support for the Texas Instruments AR7 System-on-a-Chip
family: TNETD7100, 7200 and 7300.
-config BASLER_EXCITE
- bool "Basler eXcite smart camera"
- select CEVT_R4K
- select CSRC_R4K
- select DMA_COHERENT
- select HW_HAS_PCI
- select IRQ_CPU
- select IRQ_CPU_RM7K
- select IRQ_CPU_RM9K
- select MIPS_RM9122
- select SYS_HAS_CPU_RM9000
- select SYS_SUPPORTS_32BIT_KERNEL
- select SYS_SUPPORTS_BIG_ENDIAN
- help
- The eXcite is a smart camera platform manufactured by
- Basler Vision Technologies AG.
-
config BCM47XX
bool "BCM47XX based boards"
select CEVT_R4K
@@ -701,7 +684,6 @@ config CAVIUM_OCTEON_REFERENCE_BOARD
endchoice
source "arch/mips/alchemy/Kconfig"
-source "arch/mips/basler/excite/Kconfig"
source "arch/mips/bcm63xx/Kconfig"
source "arch/mips/jazz/Kconfig"
source "arch/mips/lasat/Kconfig"
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index d2c39fd..1893efd 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -369,13 +369,6 @@ cflags-$(CONFIG_PMC_YOSEMITE) += -I$(srctree)/arch/mips/include/asm/mach-yosemit
load-$(CONFIG_PMC_YOSEMITE) += 0xffffffff80100000
#
-# Basler eXcite
-#
-core-$(CONFIG_BASLER_EXCITE) += arch/mips/basler/excite/
-cflags-$(CONFIG_BASLER_EXCITE) += -I$(srctree)/arch/mips/include/asm/mach-excite
-load-$(CONFIG_BASLER_EXCITE) += 0x80100000
-
-#
# LASAT platforms
#
core-$(CONFIG_LASAT) += arch/mips/lasat/
diff --git a/arch/mips/basler/excite/Kconfig b/arch/mips/basler/excite/Kconfig
deleted file mode 100644
index ba50607..0000000
--- a/arch/mips/basler/excite/Kconfig
+++ /dev/null
@@ -1,9 +0,0 @@
-config BASLER_EXCITE_PROTOTYPE
- bool "Support for pre-release units"
- depends on BASLER_EXCITE
- default n
- help
- Pre-series (prototype) units are different from later ones in
- some ways. Select this option if you have one of these. Please
- note that a kernel built with this option selected will not be
- able to run on normal units.
diff --git a/arch/mips/basler/excite/Makefile b/arch/mips/basler/excite/Makefile
deleted file mode 100644
index cff29cf..0000000
--- a/arch/mips/basler/excite/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# Makefile for Basler eXcite
-#
-
-obj-$(CONFIG_BASLER_EXCITE) += excite_irq.o excite_prom.o excite_setup.o \
- excite_device.o excite_procfs.o
-
-obj-m += excite_iodev.o
diff --git a/arch/mips/basler/excite/excite_device.c b/arch/mips/basler/excite/excite_device.c
deleted file mode 100644
index e00bc2d..0000000
--- a/arch/mips/basler/excite/excite_device.c
+++ /dev/null
@@ -1,403 +0,0 @@
-/*
- * Copyright (C) 2004 by Basler Vision Technologies AG
- * Author: Thomas Koeller <thomas.koeller@baslerweb.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/ioport.h>
-#include <linux/err.h>
-#include <linux/jiffies.h>
-#include <linux/sched.h>
-#include <asm/types.h>
-#include <asm/rm9k-ocd.h>
-
-#include <excite.h>
-#include <rm9k_eth.h>
-#include <rm9k_wdt.h>
-#include <rm9k_xicap.h>
-#include <excite_nandflash.h>
-
-#include "excite_iodev.h"
-
-#define RM9K_GE_UNIT 0
-#define XICAP_UNIT 0
-#define NAND_UNIT 0
-
-#define DLL_TIMEOUT 3 /* seconds */
-
-
-#define RINIT(__start__, __end__, __name__, __parent__) { \
- .name = __name__ "_0", \
- .start = (__start__), \
- .end = (__end__), \
- .flags = 0, \
- .parent = (__parent__) \
-}
-
-#define RINIT_IRQ(__irq__, __name__) { \
- .name = __name__ "_0", \
- .start = (__irq__), \
- .end = (__irq__), \
- .flags = IORESOURCE_IRQ, \
- .parent = NULL \
-}
-
-
-
-enum {
- slice_xicap,
- slice_eth
-};
-
-
-
-static struct resource
- excite_ctr_resource __maybe_unused = {
- .name = "GPI counters",
- .start = 0,
- .end = 5,
- .flags = 0,
- .parent = NULL,
- .sibling = NULL,
- .child = NULL
- },
- excite_gpislice_resource __maybe_unused = {
- .name = "GPI slices",
- .start = 0,
- .end = 1,
- .flags = 0,
- .parent = NULL,
- .sibling = NULL,
- .child = NULL
- },
- excite_mdio_channel_resource __maybe_unused = {
- .name = "MDIO channels",
- .start = 0,
- .end = 1,
- .flags = 0,
- .parent = NULL,
- .sibling = NULL,
- .child = NULL
- },
- excite_fifomem_resource __maybe_unused = {
- .name = "FIFO memory",
- .start = 0,
- .end = 767,
- .flags = 0,
- .parent = NULL,
- .sibling = NULL,
- .child = NULL
- },
- excite_scram_resource __maybe_unused = {
- .name = "Scratch RAM",
- .start = EXCITE_PHYS_SCRAM,
- .end = EXCITE_PHYS_SCRAM + EXCITE_SIZE_SCRAM - 1,
- .flags = IORESOURCE_MEM,
- .parent = NULL,
- .sibling = NULL,
- .child = NULL
- },
- excite_fpga_resource __maybe_unused = {
- .name = "System FPGA",
- .start = EXCITE_PHYS_FPGA,
- .end = EXCITE_PHYS_FPGA + EXCITE_SIZE_FPGA - 1,
- .flags = IORESOURCE_MEM,
- .parent = NULL,
- .sibling = NULL,
- .child = NULL
- },
- excite_nand_resource __maybe_unused = {
- .name = "NAND flash control",
- .start = EXCITE_PHYS_NAND,
- .end = EXCITE_PHYS_NAND + EXCITE_SIZE_NAND - 1,
- .flags = IORESOURCE_MEM,
- .parent = NULL,
- .sibling = NULL,
- .child = NULL
- },
- excite_titan_resource __maybe_unused = {
- .name = "TITAN registers",
- .start = EXCITE_PHYS_TITAN,
- .end = EXCITE_PHYS_TITAN + EXCITE_SIZE_TITAN - 1,
- .flags = IORESOURCE_MEM,
- .parent = NULL,
- .sibling = NULL,
- .child = NULL
- };
-
-
-
-static void adjust_resources(struct resource *res, unsigned int n)
-{
- struct resource *p;
- const unsigned long mask = IORESOURCE_IO | IORESOURCE_MEM
- | IORESOURCE_IRQ | IORESOURCE_DMA;
-
- for (p = res; p < res + n; p++) {
- const struct resource * const parent = p->parent;
- if (parent) {
- p->start += parent->start;
- p->end += parent->start;
- p->flags = parent->flags & mask;
- }
- }
-}
-
-
-
-#if defined(CONFIG_EXCITE_FCAP_GPI) || defined(CONFIG_EXCITE_FCAP_GPI_MODULE)
-static struct resource xicap_rsrc[] = {
- RINIT(0x4840, 0x486f, XICAP_RESOURCE_FIFO_RX, &excite_titan_resource),
- RINIT(0x4940, 0x494b, XICAP_RESOURCE_FIFO_TX, &excite_titan_resource),
- RINIT(0x5040, 0x5127, XICAP_RESOURCE_XDMA, &excite_titan_resource),
- RINIT(0x1000, 0x112f, XICAP_RESOURCE_PKTPROC, &excite_titan_resource),
- RINIT(0x1100, 0x110f, XICAP_RESOURCE_PKT_STREAM, &excite_fpga_resource),
- RINIT(0x0800, 0x0bff, XICAP_RESOURCE_DMADESC, &excite_scram_resource),
- RINIT(slice_xicap, slice_xicap, XICAP_RESOURCE_GPI_SLICE, &excite_gpislice_resource),
- RINIT(0x0100, 0x02ff, XICAP_RESOURCE_FIFO_BLK, &excite_fifomem_resource),
- RINIT_IRQ(TITAN_IRQ, XICAP_RESOURCE_IRQ)
-};
-
-static struct platform_device xicap_pdev = {
- .name = XICAP_NAME,
- .id = XICAP_UNIT,
- .num_resources = ARRAY_SIZE(xicap_rsrc),
- .resource = xicap_rsrc
-};
-
-/*
- * Create a platform device for the GPI port that receives the
- * image data from the embedded camera.
- */
-static int __init xicap_devinit(void)
-{
- unsigned long tend;
- u32 reg;
- int retval;
-
- adjust_resources(xicap_rsrc, ARRAY_SIZE(xicap_rsrc));
-
- /* Power up the slice and configure it. */
- reg = titan_readl(CPTC1R);
- reg &= ~(0x11100 << slice_xicap);
- titan_writel(reg, CPTC1R);
-
- /* Enable slice & DLL. */
- reg= titan_readl(CPRR);
- reg &= ~(0x00030003 << (slice_xicap * 2));
- titan_writel(reg, CPRR);
-
- /* Wait for DLLs to lock */
- tend = jiffies + DLL_TIMEOUT * HZ;
- while (time_before(jiffies, tend)) {
- if (!(~titan_readl(CPDSR) & (0x1 << (slice_xicap * 4))))
- break;
- yield();
- }
-
- if (~titan_readl(CPDSR) & (0x1 << (slice_xicap * 4))) {
- printk(KERN_ERR "%s: DLL not locked after %u seconds\n",
- xicap_pdev.name, DLL_TIMEOUT);
- retval = -ETIME;
- } else {
- /* Register platform device */
- retval = platform_device_register(&xicap_pdev);
- }
-
- return retval;
-}
-
-device_initcall(xicap_devinit);
-#endif /* defined(CONFIG_EXCITE_FCAP_GPI) || defined(CONFIG_EXCITE_FCAP_GPI_MODULE) */
-
-
-
-#if defined(CONFIG_WDT_RM9K_GPI) || defined(CONFIG_WDT_RM9K_GPI_MODULE)
-static struct resource wdt_rsrc[] = {
- RINIT(0, 0, WDT_RESOURCE_COUNTER, &excite_ctr_resource),
- RINIT(0x0084, 0x008f, WDT_RESOURCE_REGS, &excite_titan_resource),
- RINIT_IRQ(TITAN_IRQ, WDT_RESOURCE_IRQ)
-};
-
-static struct platform_device wdt_pdev = {
- .name = WDT_NAME,
- .id = -1,
- .num_resources = ARRAY_SIZE(wdt_rsrc),
- .resource = wdt_rsrc
-};
-
-/*
- * Create a platform device for the GPI port that receives the
- * image data from the embedded camera.
- */
-static int __init wdt_devinit(void)
-{
- adjust_resources(wdt_rsrc, ARRAY_SIZE(wdt_rsrc));
- return platform_device_register(&wdt_pdev);
-}
-
-device_initcall(wdt_devinit);
-#endif /* defined(CONFIG_WDT_RM9K_GPI) || defined(CONFIG_WDT_RM9K_GPI_MODULE) */
-
-
-
-static struct resource excite_nandflash_rsrc[] = {
- RINIT(0x2000, 0x201f, EXCITE_NANDFLASH_RESOURCE_REGS, &excite_nand_resource)
-};
-
-static struct platform_device excite_nandflash_pdev = {
- .name = "excite_nand",
- .id = NAND_UNIT,
- .num_resources = ARRAY_SIZE(excite_nandflash_rsrc),
- .resource = excite_nandflash_rsrc
-};
-
-/*
- * Create a platform device for the access to the nand-flash
- * port
- */
-static int __init excite_nandflash_devinit(void)
-{
- adjust_resources(excite_nandflash_rsrc, ARRAY_SIZE(excite_nandflash_rsrc));
-
- /* nothing to be done here */
-
- /* Register platform device */
- return platform_device_register(&excite_nandflash_pdev);
-}
-
-device_initcall(excite_nandflash_devinit);
-
-
-
-static struct resource iodev_rsrc[] = {
- RINIT_IRQ(FPGA1_IRQ, IODEV_RESOURCE_IRQ)
-};
-
-static struct platform_device io_pdev = {
- .name = IODEV_NAME,
- .id = -1,
- .num_resources = ARRAY_SIZE(iodev_rsrc),
- .resource = iodev_rsrc
-};
-
-/*
- * Create a platform device for the external I/O ports.
- */
-static int __init io_devinit(void)
-{
- adjust_resources(iodev_rsrc, ARRAY_SIZE(iodev_rsrc));
- return platform_device_register(&io_pdev);
-}
-
-device_initcall(io_devinit);
-
-
-
-
-#if defined(CONFIG_RM9K_GE) || defined(CONFIG_RM9K_GE_MODULE)
-static struct resource rm9k_ge_rsrc[] = {
- RINIT(0x2200, 0x27ff, RM9K_GE_RESOURCE_MAC, &excite_titan_resource),
- RINIT(0x1800, 0x1fff, RM9K_GE_RESOURCE_MSTAT, &excite_titan_resource),
- RINIT(0x2000, 0x212f, RM9K_GE_RESOURCE_PKTPROC, &excite_titan_resource),
- RINIT(0x5140, 0x5227, RM9K_GE_RESOURCE_XDMA, &excite_titan_resource),
- RINIT(0x4870, 0x489f, RM9K_GE_RESOURCE_FIFO_RX, &excite_titan_resource),
- RINIT(0x494c, 0x4957, RM9K_GE_RESOURCE_FIFO_TX, &excite_titan_resource),
- RINIT(0x0000, 0x007f, RM9K_GE_RESOURCE_FIFOMEM_RX, &excite_fifomem_resource),
- RINIT(0x0080, 0x00ff, RM9K_GE_RESOURCE_FIFOMEM_TX, &excite_fifomem_resource),
- RINIT(0x0180, 0x019f, RM9K_GE_RESOURCE_PHY, &excite_titan_resource),
- RINIT(0x0000, 0x03ff, RM9K_GE_RESOURCE_DMADESC_RX, &excite_scram_resource),
- RINIT(0x0400, 0x07ff, RM9K_GE_RESOURCE_DMADESC_TX, &excite_scram_resource),
- RINIT(slice_eth, slice_eth, RM9K_GE_RESOURCE_GPI_SLICE, &excite_gpislice_resource),
- RINIT(0, 0, RM9K_GE_RESOURCE_MDIO_CHANNEL, &excite_mdio_channel_resource),
- RINIT_IRQ(TITAN_IRQ, RM9K_GE_RESOURCE_IRQ_MAIN),
- RINIT_IRQ(PHY_IRQ, RM9K_GE_RESOURCE_IRQ_PHY)
-};
-
-static struct platform_device rm9k_ge_pdev = {
- .name = RM9K_GE_NAME,
- .id = RM9K_GE_UNIT,
- .num_resources = ARRAY_SIZE(rm9k_ge_rsrc),
- .resource = rm9k_ge_rsrc
-};
-
-
-
-/*
- * Create a platform device for the Ethernet port.
- */
-static int __init rm9k_ge_devinit(void)
-{
- u32 reg;
-
- adjust_resources(rm9k_ge_rsrc, ARRAY_SIZE(rm9k_ge_rsrc));
-
- /* Power up the slice and configure it. */
- reg = titan_readl(CPTC1R);
- reg &= ~(0x11000 << slice_eth);
- reg |= 0x100 << slice_eth;
- titan_writel(reg, CPTC1R);
-
- /* Take the MAC out of reset, reset the DLLs. */
- reg = titan_readl(CPRR);
- reg &= ~(0x00030000 << (slice_eth * 2));
- reg |= 0x3 << (slice_eth * 2);
- titan_writel(reg, CPRR);
-
- return platform_device_register(&rm9k_ge_pdev);
-}
-
-device_initcall(rm9k_ge_devinit);
-#endif /* defined(CONFIG_RM9K_GE) || defined(CONFIG_RM9K_GE_MODULE) */
-
-
-
-static int __init excite_setup_devs(void)
-{
- int res;
- u32 reg;
-
- /* Enable xdma and fifo interrupts */
- reg = titan_readl(0x0050);
- titan_writel(reg | 0x18000000, 0x0050);
-
- res = request_resource(&iomem_resource, &excite_titan_resource);
- if (res)
- return res;
- res = request_resource(&iomem_resource, &excite_scram_resource);
- if (res)
- return res;
- res = request_resource(&iomem_resource, &excite_fpga_resource);
- if (res)
- return res;
- res = request_resource(&iomem_resource, &excite_nand_resource);
- if (res)
- return res;
- excite_fpga_resource.flags = excite_fpga_resource.parent->flags &
- ( IORESOURCE_IO | IORESOURCE_MEM
- | IORESOURCE_IRQ | IORESOURCE_DMA);
- excite_nand_resource.flags = excite_nand_resource.parent->flags &
- ( IORESOURCE_IO | IORESOURCE_MEM
- | IORESOURCE_IRQ | IORESOURCE_DMA);
-
- return 0;
-}
-
-arch_initcall(excite_setup_devs);
-
diff --git a/arch/mips/basler/excite/excite_iodev.c b/arch/mips/basler/excite/excite_iodev.c
deleted file mode 100644
index 733b242..0000000
--- a/arch/mips/basler/excite/excite_iodev.c
+++ /dev/null
@@ -1,178 +0,0 @@
-/*
- * Copyright (C) 2005 by Basler Vision Technologies AG
- * Author: Thomas Koeller <thomas.koeller@baslerweb.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/compiler.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/wait.h>
-#include <linux/poll.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/miscdevice.h>
-#include <linux/smp_lock.h>
-
-#include "excite_iodev.h"
-
-
-
-static const struct resource *iodev_get_resource(struct platform_device *, const char *, unsigned int);
-static int __init iodev_probe(struct platform_device *);
-static int __devexit iodev_remove(struct platform_device *);
-static int iodev_open(struct inode *, struct file *);
-static int iodev_release(struct inode *, struct file *);
-static ssize_t iodev_read(struct file *, char __user *, size_t s, loff_t *);
-static unsigned int iodev_poll(struct file *, struct poll_table_struct *);
-static irqreturn_t iodev_irqhdl(int, void *);
-
-
-
-static const char iodev_name[] = "iodev";
-static unsigned int iodev_irq;
-static DECLARE_WAIT_QUEUE_HEAD(wq);
-
-
-
-static const struct file_operations fops =
-{
- .owner = THIS_MODULE,
- .open = iodev_open,
- .release = iodev_release,
- .read = iodev_read,
- .poll = iodev_poll
-};
-
-static struct miscdevice miscdev =
-{
- .minor = MISC_DYNAMIC_MINOR,
- .name = iodev_name,
- .fops = &fops
-};
-
-static struct platform_driver iodev_driver = {
- .driver = {
- .name = iodev_name,
- .owner = THIS_MODULE,
- },
- .probe = iodev_probe,
- .remove = __devexit_p(iodev_remove),
-};
-
-
-
-static const struct resource *
-iodev_get_resource(struct platform_device *pdv, const char *name,
- unsigned int type)
-{
- char buf[80];
- if (snprintf(buf, sizeof buf, "%s_0", name) >= sizeof buf)
- return NULL;
- return platform_get_resource_byname(pdv, type, buf);
-}
-
-
-
-/* No hotplugging on the platform bus - use __init */
-static int __init iodev_probe(struct platform_device *dev)
-{
- const struct resource * const ri =
- iodev_get_resource(dev, IODEV_RESOURCE_IRQ, IORESOURCE_IRQ);
-
- if (unlikely(!ri))
- return -ENXIO;
-
- iodev_irq = ri->start;
- return misc_register(&miscdev);
-}
-
-
-
-static int __devexit iodev_remove(struct platform_device *dev)
-{
- return misc_deregister(&miscdev);
-}
-
-static int iodev_open(struct inode *i, struct file *f)
-{
- int ret;
-
- ret = request_irq(iodev_irq, iodev_irqhdl, IRQF_DISABLED,
- iodev_name, &miscdev);
-
- return ret;
-}
-
-static int iodev_release(struct inode *i, struct file *f)
-{
- free_irq(iodev_irq, &miscdev);
- return 0;
-}
-
-
-
-
-static ssize_t
-iodev_read(struct file *f, char __user *d, size_t s, loff_t *o)
-{
- ssize_t ret;
- DEFINE_WAIT(w);
-
- prepare_to_wait(&wq, &w, TASK_INTERRUPTIBLE);
- if (!signal_pending(current))
- schedule();
- ret = signal_pending(current) ? -ERESTARTSYS : 0;
- finish_wait(&wq, &w);
- return ret;
-}
-
-
-static unsigned int iodev_poll(struct file *f, struct poll_table_struct *p)
-{
- poll_wait(f, &wq, p);
- return POLLOUT | POLLWRNORM;
-}
-
-static irqreturn_t iodev_irqhdl(int irq, void *ctxt)
-{
- wake_up(&wq);
-
- return IRQ_HANDLED;
-}
-
-static int __init iodev_init_module(void)
-{
- return platform_driver_register(&iodev_driver);
-}
-
-
-
-static void __exit iodev_cleanup_module(void)
-{
- platform_driver_unregister(&iodev_driver);
-}
-
-module_init(iodev_init_module);
-module_exit(iodev_cleanup_module);
-
-
-
-MODULE_AUTHOR("Thomas Koeller <thomas.koeller@baslerweb.com>");
-MODULE_DESCRIPTION("Basler eXcite i/o interrupt handler");
-MODULE_VERSION("0.0");
-MODULE_LICENSE("GPL");
diff --git a/arch/mips/basler/excite/excite_iodev.h b/arch/mips/basler/excite/excite_iodev.h
deleted file mode 100644
index cbfbb5d..0000000
--- a/arch/mips/basler/excite/excite_iodev.h
+++ /dev/null
@@ -1,10 +0,0 @@
-#ifndef __EXCITE_IODEV_H__
-#define __EXCITE_IODEV_H__
-
-/* Device name */
-#define IODEV_NAME "iodev"
-
-/* Resource names */
-#define IODEV_RESOURCE_IRQ "excite_iodev_irq"
-
-#endif /* __EXCITE_IODEV_H__ */
diff --git a/arch/mips/basler/excite/excite_irq.c b/arch/mips/basler/excite/excite_irq.c
deleted file mode 100644
index 934e0a6..0000000
--- a/arch/mips/basler/excite/excite_irq.c
+++ /dev/null
@@ -1,122 +0,0 @@
-/*
- * Copyright (C) by Basler Vision Technologies AG
- * Author: Thomas Koeller <thomas.koeller@baslereb.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/kernel_stat.h>
-#include <linux/module.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/timex.h>
-#include <linux/slab.h>
-#include <linux/random.h>
-#include <linux/bitops.h>
-#include <asm/bootinfo.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/irq_cpu.h>
-#include <asm/mipsregs.h>
-#include <asm/system.h>
-#include <asm/rm9k-ocd.h>
-
-#include <excite.h>
-
-extern asmlinkage void excite_handle_int(void);
-
-/*
- * Initialize the interrupt handler
- */
-void __init arch_init_irq(void)
-{
- mips_cpu_irq_init();
- rm7k_cpu_irq_init();
- rm9k_cpu_irq_init();
-}
-
-asmlinkage void plat_irq_dispatch(void)
-{
- const u32
- interrupts = read_c0_cause() >> 8,
- mask = ((read_c0_status() >> 8) & 0x000000ff) |
- (read_c0_intcontrol() & 0x0000ff00),
- pending = interrupts & mask;
- u32 msgintflags, msgintmask, msgint;
-
- /* process timer interrupt */
- if (pending & (1 << TIMER_IRQ)) {
- do_IRQ(TIMER_IRQ);
- return;
- }
-
- /* Process PCI interrupts */
-#if USB_IRQ < 10
- msgintflags = ocd_readl(INTP0Status0 + (USB_MSGINT / 0x20 * 0x10));
- msgintmask = ocd_readl(INTP0Mask0 + (USB_MSGINT / 0x20 * 0x10));
- msgint = msgintflags & msgintmask & (0x1 << (USB_MSGINT % 0x20));
- if ((pending & (1 << USB_IRQ)) && msgint) {
-#else
- if (pending & (1 << USB_IRQ)) {
-#endif
- do_IRQ(USB_IRQ);
- return;
- }
-
- /* Process TITAN interrupts */
- msgintflags = ocd_readl(INTP0Status0 + (TITAN_MSGINT / 0x20 * 0x10));
- msgintmask = ocd_readl(INTP0Mask0 + (TITAN_MSGINT / 0x20 * 0x10));
- msgint = msgintflags & msgintmask & (0x1 << (TITAN_MSGINT % 0x20));
- if ((pending & (1 << TITAN_IRQ)) && msgint) {
- ocd_writel(msgint, INTP0Clear0 + (TITAN_MSGINT / 0x20 * 0x10));
- do_IRQ(TITAN_IRQ);
- return;
- }
-
- /* Process FPGA line #0 interrupts */
- msgintflags = ocd_readl(INTP0Status0 + (FPGA0_MSGINT / 0x20 * 0x10));
- msgintmask = ocd_readl(INTP0Mask0 + (FPGA0_MSGINT / 0x20 * 0x10));
- msgint = msgintflags & msgintmask & (0x1 << (FPGA0_MSGINT % 0x20));
- if ((pending & (1 << FPGA0_IRQ)) && msgint) {
- do_IRQ(FPGA0_IRQ);
- return;
- }
-
- /* Process FPGA line #1 interrupts */
- msgintflags = ocd_readl(INTP0Status0 + (FPGA1_MSGINT / 0x20 * 0x10));
- msgintmask = ocd_readl(INTP0Mask0 + (FPGA1_MSGINT / 0x20 * 0x10));
- msgint = msgintflags & msgintmask & (0x1 << (FPGA1_MSGINT % 0x20));
- if ((pending & (1 << FPGA1_IRQ)) && msgint) {
- do_IRQ(FPGA1_IRQ);
- return;
- }
-
- /* Process PHY interrupts */
- msgintflags = ocd_readl(INTP0Status0 + (PHY_MSGINT / 0x20 * 0x10));
- msgintmask = ocd_readl(INTP0Mask0 + (PHY_MSGINT / 0x20 * 0x10));
- msgint = msgintflags & msgintmask & (0x1 << (PHY_MSGINT % 0x20));
- if ((pending & (1 << PHY_IRQ)) && msgint) {
- do_IRQ(PHY_IRQ);
- return;
- }
-
- /* Process spurious interrupts */
- spurious_interrupt();
-}
diff --git a/arch/mips/basler/excite/excite_procfs.c b/arch/mips/basler/excite/excite_procfs.c
deleted file mode 100644
index 08923e6..0000000
--- a/arch/mips/basler/excite/excite_procfs.c
+++ /dev/null
@@ -1,92 +0,0 @@
-/*
- * Copyright (C) 2004, 2005 by Basler Vision Technologies AG
- * Author: Thomas Koeller <thomas.koeller@baslerweb.com>
- *
- * Procfs support for Basler eXcite
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#include <linux/module.h>
-#include <linux/proc_fs.h>
-#include <linux/seq_file.h>
-#include <linux/stat.h>
-#include <asm/page.h>
-#include <asm/io.h>
-#include <asm/system.h>
-#include <asm/rm9k-ocd.h>
-
-#include <excite.h>
-
-static int excite_unit_id_proc_show(struct seq_file *m, void *v)
-{
- seq_printf(m, "%06x", unit_id);
- return 0;
-}
-
-static int excite_unit_id_proc_open(struct inode *inode, struct file *file)
-{
- return single_open(file, excite_unit_id_proc_show, NULL);
-}
-
-static const struct file_operations excite_unit_id_proc_fops = {
- .owner = THIS_MODULE,
- .open = excite_unit_id_proc_open,
- .read = seq_read,
- .llseek = seq_lseek,
- .release = single_release,
-};
-
-static int
-excite_bootrom_read(char *page, char **start, off_t off, int count,
- int *eof, void *data)
-{
- void __iomem * src;
-
- if (off >= EXCITE_SIZE_BOOTROM) {
- *eof = 1;
- return 0;
- }
-
- if ((off + count) > EXCITE_SIZE_BOOTROM)
- count = EXCITE_SIZE_BOOTROM - off;
-
- src = ioremap(EXCITE_PHYS_BOOTROM + off, count);
- if (src) {
- memcpy_fromio(page, src, count);
- iounmap(src);
- *start = page;
- } else {
- count = -ENOMEM;
- }
-
- return count;
-}
-
-void excite_procfs_init(void)
-{
- /* Create & populate /proc/excite */
- struct proc_dir_entry * const pdir = proc_mkdir("excite", NULL);
- if (pdir) {
- struct proc_dir_entry * e;
-
- e = proc_create("unit_id", S_IRUGO, pdir,
- &excite_unit_id_proc_fops);
- if (e) e->size = 6;
-
- e = create_proc_read_entry("bootrom", S_IRUGO, pdir,
- excite_bootrom_read, NULL);
- if (e) e->size = EXCITE_SIZE_BOOTROM;
- }
-}
diff --git a/arch/mips/basler/excite/excite_prom.c b/arch/mips/basler/excite/excite_prom.c
deleted file mode 100644
index 68d8bc5..0000000
--- a/arch/mips/basler/excite/excite_prom.c
+++ /dev/null
@@ -1,144 +0,0 @@
-/*
- * Copyright (C) 2004, 2005 by Thomas Koeller (thomas.koeller@baslerweb.com)
- * Based on the PMC-Sierra Yosemite board support by Ralf Baechle and
- * Manish Lachwani.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/mm.h>
-#include <linux/delay.h>
-#include <linux/smp.h>
-#include <linux/module.h>
-#include <asm/io.h>
-#include <asm/pgtable.h>
-#include <asm/processor.h>
-#include <asm/reboot.h>
-#include <asm/system.h>
-#include <asm/bootinfo.h>
-#include <asm/string.h>
-
-#include <excite.h>
-
-/* This struct is used by Redboot to pass arguments to the kernel */
-typedef struct
-{
- char *name;
- char *val;
-} t_env_var;
-
-struct parmblock {
- t_env_var memsize;
- t_env_var modetty0;
- t_env_var ethaddr;
- t_env_var env_end;
- char *argv[2];
- char text[0];
-};
-
-static unsigned int prom_argc;
-static const char ** prom_argv;
-static const t_env_var * prom_env;
-
-static void prom_halt(void) __attribute__((noreturn));
-static void prom_exit(void) __attribute__((noreturn));
-
-
-
-const char *get_system_type(void)
-{
- return "Basler eXcite";
-}
-
-/*
- * Halt the system
- */
-static void prom_halt(void)
-{
- printk(KERN_NOTICE "\n** System halted.\n");
- while (1)
- asm volatile (
- "\t.set\tmips3\n"
- "\twait\n"
- "\t.set\tmips0\n"
- );
-}
-
-/*
- * Reset the CPU and re-enter Redboot
- */
-static void prom_exit(void)
-{
- unsigned int i;
- volatile unsigned char * const flg =
- (volatile unsigned char *) (EXCITE_ADDR_FPGA + EXCITE_FPGA_DPR);
-
- /* Clear the watchdog reset flag, set the reboot flag */
- *flg &= ~0x01;
- *flg |= 0x80;
-
- for (i = 0; i < 10; i++) {
- *(volatile unsigned char *) (EXCITE_ADDR_FPGA + EXCITE_FPGA_SYSCTL) = 0x02;
- iob();
- mdelay(1000);
- }
-
- printk(KERN_NOTICE "Reset failed\n");
- prom_halt();
-}
-
-static const char __init *prom_getenv(char *name)
-{
- const t_env_var * p;
- for (p = prom_env; p->name != NULL; p++)
- if(strcmp(name, p->name) == 0)
- break;
- return p->val;
-}
-
-/*
- * Init routine which accepts the variables from Redboot
- */
-void __init prom_init(void)
-{
- const struct parmblock * const pb = (struct parmblock *) fw_arg2;
-
- prom_argc = fw_arg0;
- prom_argv = (const char **) fw_arg1;
- prom_env = &pb->memsize;
-
- /* Callbacks for halt, restart */
- _machine_restart = (void (*)(char *)) prom_exit;
- _machine_halt = prom_halt;
-
-#ifdef CONFIG_32BIT
- /* copy command line */
- strcpy(arcs_cmdline, prom_argv[1]);
- memsize = simple_strtol(prom_getenv("memsize"), NULL, 16);
- strcpy(modetty, prom_getenv("modetty0"));
-#endif /* CONFIG_32BIT */
-
-#ifdef CONFIG_64BIT
-# error 64 bit support not implemented
-#endif /* CONFIG_64BIT */
-}
-
-/* This is called from free_initmem(), so we need to provide it */
-void __init prom_free_prom_memory(void)
-{
- /* Nothing to do */
-}
diff --git a/arch/mips/basler/excite/excite_setup.c b/arch/mips/basler/excite/excite_setup.c
deleted file mode 100644
index d66b3b8..0000000
--- a/arch/mips/basler/excite/excite_setup.c
+++ /dev/null
@@ -1,302 +0,0 @@
-/*
- * Copyright (C) 2004, 2005 by Basler Vision Technologies AG
- * Author: Thomas Koeller <thomas.koeller@baslerweb.com>
- * Based on the PMC-Sierra Yosemite board support by Ralf Baechle and
- * Manish Lachwani.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/tty.h>
-#include <linux/serial_core.h>
-#include <linux/serial.h>
-#include <linux/serial_8250.h>
-#include <linux/ioport.h>
-#include <linux/spinlock.h>
-#include <asm/bootinfo.h>
-#include <asm/mipsregs.h>
-#include <asm/pgtable-32.h>
-#include <asm/io.h>
-#include <asm/time.h>
-#include <asm/rm9k-ocd.h>
-
-#include <excite.h>
-
-#define TITAN_UART_CLK 25000000
-
-#if 1
-/* normal serial port assignment */
-#define REGBASE_SER0 0x0208
-#define REGBASE_SER1 0x0238
-#define MASK_SER0 0x1
-#define MASK_SER1 0x2
-#else
-/* serial ports swapped */
-#define REGBASE_SER0 0x0238
-#define REGBASE_SER1 0x0208
-#define MASK_SER0 0x2
-#define MASK_SER1 0x1
-#endif
-
-unsigned long memsize;
-char modetty[30];
-unsigned int titan_irq = TITAN_IRQ;
-static void __iomem * ctl_regs;
-u32 unit_id;
-
-volatile void __iomem * const ocd_base = (void *) (EXCITE_ADDR_OCD);
-volatile void __iomem * const titan_base = (void *) (EXCITE_ADDR_TITAN);
-
-/* Protect access to shared GPI registers */
-DEFINE_SPINLOCK(titan_lock);
-int titan_irqflags;
-
-
-/*
- * The eXcite platform uses the alternate timer interrupt
- *
- * Fixme: At the time of this writing cevt-r4k.c doesn't yet know about how
- * to handle the alternate timer interrupt of the RM9000.
- */
-void __init plat_time_init(void)
-{
- const u32 modebit5 = ocd_readl(0x00e4);
- unsigned int mult = ((modebit5 >> 11) & 0x1f) + 2;
- unsigned int div = ((modebit5 >> 16) & 0x1f) + 2;
-
- if (div == 33)
- div = 1;
- mips_hpt_frequency = EXCITE_CPU_EXT_CLOCK * mult / div / 2;
-}
-
-static int __init excite_init_console(void)
-{
-#if defined(CONFIG_SERIAL_8250)
- static __initdata char serr[] =
- KERN_ERR "Serial port #%u setup failed\n";
- struct uart_port up;
-
- /* Take the DUART out of reset */
- titan_writel(0x00ff1cff, CPRR);
-
-#if (CONFIG_SERIAL_8250_NR_UARTS > 1)
- /* Enable both ports */
- titan_writel(MASK_SER0 | MASK_SER1, UACFG);
-#else
- /* Enable port #0 only */
- titan_writel(MASK_SER0, UACFG);
-#endif
-
- /*
- * Set up serial port #0. Do not use autodetection; the result is
- * not what we want.
- */
- memset(&up, 0, sizeof(up));
- up.membase = (char *) titan_addr(REGBASE_SER0);
- up.irq = TITAN_IRQ;
- up.uartclk = TITAN_UART_CLK;
- up.regshift = 0;
- up.iotype = UPIO_RM9000;
- up.type = PORT_RM9000;
- up.flags = UPF_SHARE_IRQ;
- up.line = 0;
- if (early_serial_setup(&up))
- printk(serr, up.line);
-
-#if CONFIG_SERIAL_8250_NR_UARTS > 1
- /* And now for port #1. */
- up.membase = (char *) titan_addr(REGBASE_SER1);
- up.line = 1;
- if (early_serial_setup(&up))
- printk(serr, up.line);
-#endif /* CONFIG_SERIAL_8250_NR_UARTS > 1 */
-#else
- /* Leave the DUART in reset */
- titan_writel(0x00ff3cff, CPRR);
-#endif /* defined(CONFIG_SERIAL_8250) */
-
- return 0;
-}
-
-static int __init excite_platform_init(void)
-{
- unsigned int i;
- unsigned char buf[3];
- u8 reg;
- void __iomem * dpr;
-
- /* BIU buffer allocations */
- ocd_writel(8, CPURSLMT); /* CPU */
- titan_writel(4, CPGRWL); /* GPI / Ethernet */
-
- /* Map control registers located in FPGA */
- ctl_regs = ioremap_nocache(EXCITE_PHYS_FPGA + EXCITE_FPGA_SYSCTL, 16);
- if (!ctl_regs)
- panic("eXcite: failed to map platform control registers\n");
- memcpy_fromio(buf, ctl_regs + 2, ARRAY_SIZE(buf));
- unit_id = buf[0] | (buf[1] << 8) | (buf[2] << 16);
-
- /* Clear the reboot flag */
- dpr = ioremap_nocache(EXCITE_PHYS_FPGA + EXCITE_FPGA_DPR, 1);
- reg = __raw_readb(dpr);
- __raw_writeb(reg & 0x7f, dpr);
- iounmap(dpr);
-
- /* Interrupt controller setup */
- for (i = INTP0Status0; i < INTP0Status0 + 0x80; i += 0x10) {
- ocd_writel(0x00000000, i + 0x04);
- ocd_writel(0xffffffff, i + 0x0c);
- }
- ocd_writel(0x2, NMICONFIG);
-
- ocd_writel(0x1 << (TITAN_MSGINT % 0x20),
- INTP0Mask0 + (0x10 * (TITAN_MSGINT / 0x20)));
- ocd_writel((0x1 << (FPGA0_MSGINT % 0x20))
- | ocd_readl(INTP0Mask0 + (0x10 * (FPGA0_MSGINT / 0x20))),
- INTP0Mask0 + (0x10 * (FPGA0_MSGINT / 0x20)));
- ocd_writel((0x1 << (FPGA1_MSGINT % 0x20))
- | ocd_readl(INTP0Mask0 + (0x10 * (FPGA1_MSGINT / 0x20))),
- INTP0Mask0 + (0x10 * (FPGA1_MSGINT / 0x20)));
- ocd_writel((0x1 << (PHY_MSGINT % 0x20))
- | ocd_readl(INTP0Mask0 + (0x10 * (PHY_MSGINT / 0x20))),
- INTP0Mask0 + (0x10 * (PHY_MSGINT / 0x20)));
-#if USB_IRQ < 10
- ocd_writel((0x1 << (USB_MSGINT % 0x20))
- | ocd_readl(INTP0Mask0 + (0x10 * (USB_MSGINT / 0x20))),
- INTP0Mask0 + (0x10 * (USB_MSGINT / 0x20)));
-#endif
- /* Enable the packet FIFO, XDMA and XDMA arbiter */
- titan_writel(0x00ff18ff, CPRR);
-
- /*
- * Set up the PADMUX. Power down all ethernet slices,
- * they will be powered up and configured at device startup.
- */
- titan_writel(0x00878206, CPTC1R);
- titan_writel(0x00001100, CPTC0R); /* latch PADMUX, enable WCIMODE */
-
- /* Reset and enable the FIFO block */
- titan_writel(0x00000001, SDRXFCIE);
- titan_writel(0x00000001, SDTXFCIE);
- titan_writel(0x00000100, SDRXFCIE);
- titan_writel(0x00000000, SDTXFCIE);
-
- /*
- * Initialize the common interrupt shared by all components of
- * the GPI/Ethernet subsystem.
- */
- titan_writel((EXCITE_PHYS_OCD >> 12), CPCFG0);
- titan_writel(TITAN_MSGINT, CPCFG1);
-
- /*
- * XDMA configuration.
- * In order for the XDMA to be sharable among multiple drivers,
- * the setup must be done here in the platform. The reason is that
- * this setup can only be done while the XDMA is in reset. If this
- * were done in a driver, it would interrupt all other drivers
- * using the XDMA.
- */
- titan_writel(0x80021dff, GXCFG); /* XDMA reset */
- titan_writel(0x00000000, CPXCISRA);
- titan_writel(0x00000000, CPXCISRB); /* clear pending interrupts */
-#if defined(CONFIG_HIGHMEM)
-# error change for HIGHMEM support!
-#else
- titan_writel(0x00000000, GXDMADRPFX); /* buffer address prefix */
-#endif
- titan_writel(0, GXDMA_DESCADR);
-
- for (i = 0x5040; i <= 0x5300; i += 0x0040)
- titan_writel(0x80080000, i); /* reset channel */
-
- titan_writel((0x1 << 29) /* no sparse tx descr. */
- | (0x1 << 28) /* no sparse rx descr. */
- | (0x1 << 23) | (0x1 << 24) /* descriptor coherency */
- | (0x1 << 21) | (0x1 << 22) /* data coherency */
- | (0x1 << 17)
- | 0x1dff,
- GXCFG);
-
-#if defined(CONFIG_SMP)
-# error No SMP support
-#else
- /* All interrupts go to core #0 only. */
- titan_writel(0x1f007fff, CPDST0A);
- titan_writel(0x00000000, CPDST0B);
- titan_writel(0x0000ff3f, CPDST1A);
- titan_writel(0x00000000, CPDST1B);
- titan_writel(0x00ffffff, CPXDSTA);
- titan_writel(0x00000000, CPXDSTB);
-#endif
-
- /* Enable DUART interrupts, disable everything else. */
- titan_writel(0x04000000, CPGIG0ER);
- titan_writel(0x000000c0, CPGIG1ER);
-
- excite_procfs_init();
- return 0;
-}
-
-void __init plat_mem_setup(void)
-{
- volatile u32 * const boot_ocd_base = (u32 *) 0xbf7fc000;
-
- /* Announce RAM to system */
- add_memory_region(0x00000000, memsize, BOOT_MEM_RAM);
-
- /* Set up the peripheral address map */
- *(boot_ocd_base + (LKB9 / sizeof(u32))) = 0;
- *(boot_ocd_base + (LKB10 / sizeof(u32))) = 0;
- *(boot_ocd_base + (LKB11 / sizeof(u32))) = 0;
- *(boot_ocd_base + (LKB12 / sizeof(u32))) = 0;
- wmb();
- *(boot_ocd_base + (LKB0 / sizeof(u32))) = EXCITE_PHYS_OCD >> 4;
- wmb();
-
- ocd_writel((EXCITE_PHYS_TITAN >> 4) | 0x1UL, LKB5);
- ocd_writel(((EXCITE_SIZE_TITAN >> 4) & 0x7fffff00) - 0x100, LKM5);
- ocd_writel((EXCITE_PHYS_SCRAM >> 4) | 0x1UL, LKB13);
- ocd_writel(((EXCITE_SIZE_SCRAM >> 4) & 0xffffff00) - 0x100, LKM13);
-
- /* Local bus slot #0 */
- ocd_writel(0x00040510, LDP0);
- ocd_writel((EXCITE_PHYS_BOOTROM >> 4) | 0x1UL, LKB9);
- ocd_writel(((EXCITE_SIZE_BOOTROM >> 4) & 0x03ffff00) - 0x100, LKM9);
-
- /* Local bus slot #2 */
- ocd_writel(0x00000330, LDP2);
- ocd_writel((EXCITE_PHYS_FPGA >> 4) | 0x1, LKB11);
- ocd_writel(((EXCITE_SIZE_FPGA >> 4) - 0x100) & 0x03ffff00, LKM11);
-
- /* Local bus slot #3 */
- ocd_writel(0x00123413, LDP3);
- ocd_writel((EXCITE_PHYS_NAND >> 4) | 0x1, LKB12);
- ocd_writel(((EXCITE_SIZE_NAND >> 4) - 0x100) & 0x03ffff00, LKM12);
-}
-
-
-
-console_initcall(excite_init_console);
-arch_initcall(excite_platform_init);
-
-EXPORT_SYMBOL(titan_lock);
-EXPORT_SYMBOL(titan_irqflags);
-EXPORT_SYMBOL(titan_irq);
-EXPORT_SYMBOL(ocd_base);
-EXPORT_SYMBOL(titan_base);
diff --git a/arch/mips/configs/ar7_defconfig b/arch/mips/configs/ar7_defconfig
index 2cb304a..1d5ec3c 100644
--- a/arch/mips/configs/ar7_defconfig
+++ b/arch/mips/configs/ar7_defconfig
@@ -10,7 +10,6 @@ CONFIG_MIPS=y
#
# CONFIG_MACH_ALCHEMY is not set
CONFIG_AR7=y
-# CONFIG_BASLER_EXCITE is not set
# CONFIG_BCM47XX is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
diff --git a/arch/mips/configs/bcm47xx_defconfig b/arch/mips/configs/bcm47xx_defconfig
index 94b7d57..8715de1 100644
--- a/arch/mips/configs/bcm47xx_defconfig
+++ b/arch/mips/configs/bcm47xx_defconfig
@@ -9,7 +9,6 @@ CONFIG_MIPS=y
# Machine selection
#
# CONFIG_MACH_ALCHEMY is not set
-# CONFIG_BASLER_EXCITE is not set
CONFIG_BCM47XX=y
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
diff --git a/arch/mips/configs/bcm63xx_defconfig b/arch/mips/configs/bcm63xx_defconfig
index ea00c18..efa6598 100644
--- a/arch/mips/configs/bcm63xx_defconfig
+++ b/arch/mips/configs/bcm63xx_defconfig
@@ -9,7 +9,6 @@ CONFIG_MIPS=y
# Machine selection
#
# CONFIG_MACH_ALCHEMY is not set
-# CONFIG_BASLER_EXCITE is not set
# CONFIG_BCM47XX is not set
CONFIG_BCM63XX=y
# CONFIG_MIPS_COBALT is not set
diff --git a/arch/mips/configs/bigsur_defconfig b/arch/mips/configs/bigsur_defconfig
index 13d9eb4..1f0228d 100644
--- a/arch/mips/configs/bigsur_defconfig
+++ b/arch/mips/configs/bigsur_defconfig
@@ -9,7 +9,6 @@ CONFIG_MIPS=y
# Machine selection
#
# CONFIG_MACH_ALCHEMY is not set
-# CONFIG_BASLER_EXCITE is not set
# CONFIG_BCM47XX is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
diff --git a/arch/mips/configs/capcella_defconfig b/arch/mips/configs/capcella_defconfig
index 185df23..be81bf6 100644
--- a/arch/mips/configs/capcella_defconfig
+++ b/arch/mips/configs/capcella_defconfig
@@ -9,7 +9,6 @@ CONFIG_MIPS=y
# Machine selection
#
# CONFIG_MACH_ALCHEMY is not set
-# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
diff --git a/arch/mips/configs/cavium-octeon_defconfig b/arch/mips/configs/cavium-octeon_defconfig
index 1819a4c..22819d9 100644
--- a/arch/mips/configs/cavium-octeon_defconfig
+++ b/arch/mips/configs/cavium-octeon_defconfig
@@ -9,7 +9,6 @@ CONFIG_MIPS=y
# Machine selection
#
# CONFIG_MACH_ALCHEMY is not set
-# CONFIG_BASLER_EXCITE is not set
# CONFIG_BCM47XX is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
diff --git a/arch/mips/configs/cobalt_defconfig b/arch/mips/configs/cobalt_defconfig
index 6c8cca8..b150286 100644
--- a/arch/mips/configs/cobalt_defconfig
+++ b/arch/mips/configs/cobalt_defconfig
@@ -9,7 +9,6 @@ CONFIG_MIPS=y
# Machine selection
#
# CONFIG_MACH_ALCHEMY is not set
-# CONFIG_BASLER_EXCITE is not set
# CONFIG_BCM47XX is not set
CONFIG_MIPS_COBALT=y
# CONFIG_MACH_DECSTATION is not set
diff --git a/arch/mips/configs/db1000_defconfig b/arch/mips/configs/db1000_defconfig
index dbdf3bb..63cdea2 100644
--- a/arch/mips/configs/db1000_defconfig
+++ b/arch/mips/configs/db1000_defconfig
@@ -23,7 +23,6 @@ CONFIG_MIPS_DB1000=y
# CONFIG_MIPS_DB1550 is not set
# CONFIG_MIPS_DB1200 is not set
# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
diff --git a/arch/mips/configs/db1100_defconfig b/arch/mips/configs/db1100_defconfig
index fa68144..7ae0f9a 100644
--- a/arch/mips/configs/db1100_defconfig
+++ b/arch/mips/configs/db1100_defconfig
@@ -23,7 +23,6 @@ CONFIG_MIPS_DB1100=y
# CONFIG_MIPS_DB1550 is not set
# CONFIG_MIPS_DB1200 is not set
# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
diff --git a/arch/mips/configs/db1200_defconfig b/arch/mips/configs/db1200_defconfig
index d73f1de..a6d9e1f 100644
--- a/arch/mips/configs/db1200_defconfig
+++ b/arch/mips/configs/db1200_defconfig
@@ -23,7 +23,6 @@ CONFIG_MACH_ALCHEMY=y
# CONFIG_MIPS_DB1550 is not set
CONFIG_MIPS_DB1200=y
# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
diff --git a/arch/mips/configs/db1500_defconfig b/arch/mips/configs/db1500_defconfig
index ec3e028a..a3a462b 100644
--- a/arch/mips/configs/db1500_defconfig
+++ b/arch/mips/configs/db1500_defconfig
@@ -23,7 +23,6 @@ CONFIG_MIPS_DB1500=y
# CONFIG_MIPS_DB1550 is not set
# CONFIG_MIPS_DB1200 is not set
# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
diff --git a/arch/mips/configs/db1550_defconfig b/arch/mips/configs/db1550_defconfig
index 7631dae..bfc962e 100644
--- a/arch/mips/configs/db1550_defconfig
+++ b/arch/mips/configs/db1550_defconfig
@@ -23,7 +23,6 @@ CONFIG_MACH_ALCHEMY=y
CONFIG_MIPS_DB1550=y
# CONFIG_MIPS_DB1200 is not set
# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
diff --git a/arch/mips/configs/decstation_defconfig b/arch/mips/configs/decstation_defconfig
index 9e65e6a..7eb6d1b 100644
--- a/arch/mips/configs/decstation_defconfig
+++ b/arch/mips/configs/decstation_defconfig
@@ -22,7 +22,6 @@ CONFIG_ZONE_DMA=y
# CONFIG_MIPS_DB1550 is not set
# CONFIG_MIPS_DB1200 is not set
# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
CONFIG_MACH_DECSTATION=y
# CONFIG_MACH_JAZZ is not set
diff --git a/arch/mips/configs/e55_defconfig b/arch/mips/configs/e55_defconfig
index 1bd84d4..c6b1d6b 100644
--- a/arch/mips/configs/e55_defconfig
+++ b/arch/mips/configs/e55_defconfig
@@ -9,7 +9,6 @@ CONFIG_MIPS=y
# Machine selection
#
# CONFIG_MACH_ALCHEMY is not set
-# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
diff --git a/arch/mips/configs/excite_defconfig b/arch/mips/configs/excite_defconfig
deleted file mode 100644
index 1995d43..0000000
--- a/arch/mips/configs/excite_defconfig
+++ /dev/null
@@ -1,1335 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.20
-# Tue Feb 20 21:47:31 2007
-#
-CONFIG_MIPS=y
-
-#
-# Machine selection
-#
-CONFIG_ZONE_DMA=y
-# CONFIG_MIPS_MTX1 is not set
-# CONFIG_MIPS_BOSPORUS is not set
-# CONFIG_MIPS_PB1000 is not set
-# CONFIG_MIPS_PB1100 is not set
-# CONFIG_MIPS_PB1500 is not set
-# CONFIG_MIPS_PB1550 is not set
-# CONFIG_MIPS_PB1200 is not set
-# CONFIG_MIPS_DB1000 is not set
-# CONFIG_MIPS_DB1100 is not set
-# CONFIG_MIPS_DB1500 is not set
-# CONFIG_MIPS_DB1550 is not set
-# CONFIG_MIPS_DB1200 is not set
-# CONFIG_MIPS_MIRAGE is not set
-CONFIG_BASLER_EXCITE=y
-# CONFIG_BASLER_EXCITE_PROTOTYPE is not set
-# CONFIG_MIPS_COBALT is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MIPS_MALTA is not set
-# CONFIG_WR_PPMC is not set
-# CONFIG_MIPS_SIM is not set
-# CONFIG_MOMENCO_JAGUAR_ATX is not set
-# CONFIG_MIPS_XXS1500 is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_MACH_VR41XX is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_MARKEINS is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_SWARM is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SNI_RM is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_GENERIC_TIME=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
-CONFIG_DMA_COHERENT=y
-CONFIG_CPU_BIG_ENDIAN=y
-# CONFIG_CPU_LITTLE_ENDIAN is not set
-CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
-CONFIG_IRQ_CPU=y
-CONFIG_IRQ_CPU_RM7K=y
-CONFIG_IRQ_CPU_RM9K=y
-CONFIG_MIPS_RM9122=y
-CONFIG_SERIAL_RM9000=y
-CONFIG_GPI_RM9000=y
-CONFIG_WDT_RM9000=y
-CONFIG_MIPS_L1_CACHE_SHIFT=5
-
-#
-# CPU selection
-#
-# CONFIG_CPU_MIPS32_R1 is not set
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_VR41XX is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_RM7000 is not set
-CONFIG_CPU_RM9000=y
-# CONFIG_CPU_SB1 is not set
-CONFIG_SYS_HAS_CPU_RM9000=y
-CONFIG_WEAK_ORDERING=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_64BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_64BIT_KERNEL=y
-
-#
-# Kernel type
-#
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_8KB is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-# CONFIG_PAGE_SIZE_64KB is not set
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_VPE_LOADER is not set
-# CONFIG_64BIT_PHYS_ADDR is not set
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-CONFIG_ARCH_FLATMEM_ENABLE=y
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-# CONFIG_HZ_48 is not set
-# CONFIG_HZ_100 is not set
-# CONFIG_HZ_128 is not set
-# CONFIG_HZ_250 is not set
-# CONFIG_HZ_256 is not set
-CONFIG_HZ_1000=y
-# CONFIG_HZ_1024 is not set
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_HZ=1000
-# CONFIG_PREEMPT_NONE is not set
-# CONFIG_PREEMPT_VOLUNTARY is not set
-CONFIG_PREEMPT=y
-CONFIG_PREEMPT_BKL=y
-# CONFIG_KEXEC is not set
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# Code maturity level options
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-
-#
-# General setup
-#
-CONFIG_LOCALVERSION=""
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-# CONFIG_IPC_NS is not set
-CONFIG_SYSVIPC_SYSCTL=y
-CONFIG_POSIX_MQUEUE=y
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_UTS_NS is not set
-# CONFIG_AUDIT is not set
-# CONFIG_IKCONFIG is not set
-CONFIG_SYSFS_DEPRECATED=y
-# CONFIG_RELAY is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_EPOLL=y
-CONFIG_SHMEM=y
-CONFIG_SLAB=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_SLOB is not set
-
-#
-# Loadable module support
-#
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_MODULE_FORCE_UNLOAD is not set
-# CONFIG_MODVERSIONS is not set
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-
-#
-# Block layer
-#
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-CONFIG_DEFAULT_AS=y
-# CONFIG_DEFAULT_DEADLINE is not set
-# CONFIG_DEFAULT_CFQ is not set
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="anticipatory"
-
-#
-# Bus options (PCI, PCMCIA, EISA, ISA, TC)
-#
-CONFIG_HW_HAS_PCI=y
-CONFIG_PCI=y
-CONFIG_MMU=y
-
-#
-# PCCARD (PCMCIA/CardBus) support
-#
-# CONFIG_PCCARD is not set
-
-#
-# PCI Hotplug Support
-#
-# CONFIG_HOTPLUG_PCI is not set
-
-#
-# Executable file formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_MISC is not set
-CONFIG_TRAD_SIGNALS=y
-
-#
-# Power management options
-#
-CONFIG_PM=y
-# CONFIG_PM_LEGACY is not set
-# CONFIG_PM_DEBUG is not set
-# CONFIG_PM_SYSFS_DEPRECATED is not set
-
-#
-# Networking
-#
-CONFIG_NET=y
-
-#
-# Networking options
-#
-# CONFIG_NETDEBUG is not set
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-CONFIG_XFRM=y
-# CONFIG_XFRM_USER is not set
-# CONFIG_XFRM_SUB_POLICY is not set
-CONFIG_XFRM_MIGRATE=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-CONFIG_INET_XFRM_MODE_TRANSPORT=m
-CONFIG_INET_XFRM_MODE_TUNNEL=m
-CONFIG_INET_XFRM_MODE_BEET=m
-CONFIG_INET_DIAG=y
-CONFIG_INET_TCP_DIAG=y
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-CONFIG_TCP_MD5SIG=y
-# CONFIG_IPV6 is not set
-# CONFIG_INET6_XFRM_TUNNEL is not set
-# CONFIG_INET6_TUNNEL is not set
-CONFIG_NETWORK_SECMARK=y
-# CONFIG_NETFILTER is not set
-
-#
-# DCCP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_DCCP is not set
-
-#
-# SCTP Configuration (EXPERIMENTAL)
-#
-# CONFIG_IP_SCTP is not set
-
-#
-# TIPC Configuration (EXPERIMENTAL)
-#
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-
-#
-# QoS and/or fair queueing
-#
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_IEEE80211 is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-# CONFIG_SYS_HYPERVISOR is not set
-
-#
-# Connector - unified userspace <-> kernelspace linker
-#
-# CONFIG_CONNECTOR is not set
-
-#
-# Memory Technology Devices (MTD)
-#
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_CMDLINE_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_OBSOLETE_CHIPS is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-
-#
-# NAND Flash Device Drivers
-#
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_VERIFY_WRITE=y
-# CONFIG_MTD_NAND_ECC_SMC is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_BASLER_EXCITE is not set
-# CONFIG_MTD_NAND_CAFE is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-
-#
-# OneNAND Flash Device Drivers
-#
-# CONFIG_MTD_ONENAND is not set
-
-#
-# Parallel port support
-#
-# CONFIG_PARPORT is not set
-
-#
-# Plug and Play support
-#
-# CONFIG_PNPACPI is not set
-
-#
-# Block devices
-#
-# CONFIG_BLK_CPQ_DA is not set
-# CONFIG_BLK_CPQ_CISS_DA is not set
-# CONFIG_BLK_DEV_DAC960 is not set
-# CONFIG_BLK_DEV_UMEM is not set
-# CONFIG_BLK_DEV_COW_COMMON is not set
-CONFIG_BLK_DEV_LOOP=m
-# CONFIG_BLK_DEV_CRYPTOLOOP is not set
-# CONFIG_BLK_DEV_NBD is not set
-# CONFIG_BLK_DEV_SX8 is not set
-# CONFIG_BLK_DEV_UB is not set
-# CONFIG_BLK_DEV_RAM is not set
-# CONFIG_BLK_DEV_INITRD is not set
-# CONFIG_CDROM_PKTCDVD is not set
-# CONFIG_ATA_OVER_ETH is not set
-
-#
-# Misc devices
-#
-CONFIG_SGI_IOC4=m
-# CONFIG_TIFM_CORE is not set
-
-#
-# ATA/ATAPI/MFM/RLL support
-#
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-CONFIG_SCSI=y
-CONFIG_SCSI_TGT=m
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_SCSI_PROC_FS is not set
-
-#
-# SCSI support type (disk, tape, CD-ROM)
-#
-CONFIG_BLK_DEV_SD=y
-# CONFIG_CHR_DEV_ST is not set
-# CONFIG_CHR_DEV_OSST is not set
-# CONFIG_BLK_DEV_SR is not set
-# CONFIG_CHR_DEV_SG is not set
-# CONFIG_CHR_DEV_SCH is not set
-
-#
-# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
-#
-# CONFIG_SCSI_MULTI_LUN is not set
-# CONFIG_SCSI_CONSTANTS is not set
-# CONFIG_SCSI_LOGGING is not set
-CONFIG_SCSI_SCAN_ASYNC=y
-
-#
-# SCSI Transports
-#
-# CONFIG_SCSI_SPI_ATTRS is not set
-# CONFIG_SCSI_FC_ATTRS is not set
-# CONFIG_SCSI_ISCSI_ATTRS is not set
-CONFIG_SCSI_SAS_ATTRS=m
-CONFIG_SCSI_SAS_LIBSAS=m
-# CONFIG_SCSI_SAS_LIBSAS_DEBUG is not set
-
-#
-# SCSI low-level drivers
-#
-# CONFIG_ISCSI_TCP is not set
-# CONFIG_BLK_DEV_3W_XXXX_RAID is not set
-# CONFIG_SCSI_3W_9XXX is not set
-# CONFIG_SCSI_ACARD is not set
-# CONFIG_SCSI_AACRAID is not set
-# CONFIG_SCSI_AIC7XXX is not set
-# CONFIG_SCSI_AIC7XXX_OLD is not set
-# CONFIG_SCSI_AIC79XX is not set
-CONFIG_SCSI_AIC94XX=m
-# CONFIG_AIC94XX_DEBUG is not set
-# CONFIG_SCSI_DPT_I2O is not set
-# CONFIG_SCSI_ARCMSR is not set
-# CONFIG_MEGARAID_NEWGEN is not set
-# CONFIG_MEGARAID_LEGACY is not set
-# CONFIG_MEGARAID_SAS is not set
-# CONFIG_SCSI_HPTIOP is not set
-# CONFIG_SCSI_DMX3191D is not set
-# CONFIG_SCSI_FUTURE_DOMAIN is not set
-# CONFIG_SCSI_IPS is not set
-# CONFIG_SCSI_INITIO is not set
-# CONFIG_SCSI_INIA100 is not set
-# CONFIG_SCSI_STEX is not set
-# CONFIG_SCSI_SYM53C8XX_2 is not set
-# CONFIG_SCSI_QLOGIC_1280 is not set
-# CONFIG_SCSI_QLA_FC is not set
-# CONFIG_SCSI_QLA_ISCSI is not set
-# CONFIG_SCSI_LPFC is not set
-# CONFIG_SCSI_DC395x is not set
-# CONFIG_SCSI_DC390T is not set
-# CONFIG_SCSI_NSP32 is not set
-# CONFIG_SCSI_DEBUG is not set
-# CONFIG_SCSI_SRP is not set
-
-#
-# Serial ATA (prod) and Parallel ATA (experimental) drivers
-#
-# CONFIG_ATA is not set
-
-#
-# Multi-device support (RAID and LVM)
-#
-# CONFIG_MD is not set
-
-#
-# Fusion MPT device support
-#
-# CONFIG_FUSION is not set
-# CONFIG_FUSION_SPI is not set
-# CONFIG_FUSION_FC is not set
-# CONFIG_FUSION_SAS is not set
-
-#
-# IEEE 1394 (FireWire) support
-#
-# CONFIG_IEEE1394 is not set
-
-#
-# I2O device support
-#
-# CONFIG_I2O is not set
-
-#
-# Network device support
-#
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-
-#
-# ARCnet devices
-#
-# CONFIG_ARCNET is not set
-
-#
-# PHY device support
-#
-
-#
-# Ethernet (10 or 100Mbit)
-#
-# CONFIG_NET_ETHERNET is not set
-
-#
-# Ethernet (1000 Mbit)
-#
-# CONFIG_ACENIC is not set
-# CONFIG_DL2K is not set
-# CONFIG_E1000 is not set
-# CONFIG_NS83820 is not set
-# CONFIG_HAMACHI is not set
-# CONFIG_YELLOWFIN is not set
-# CONFIG_R8169 is not set
-# CONFIG_SIS190 is not set
-# CONFIG_SKGE is not set
-# CONFIG_SKY2 is not set
-# CONFIG_SK98LIN is not set
-# CONFIG_TIGON3 is not set
-# CONFIG_BNX2 is not set
-CONFIG_QLA3XXX=m
-# CONFIG_ATL1 is not set
-
-#
-# Ethernet (10000 Mbit)
-#
-# CONFIG_CHELSIO_T1 is not set
-CONFIG_CHELSIO_T3=m
-# CONFIG_IXGB is not set
-# CONFIG_S2IO is not set
-# CONFIG_MYRI10GE is not set
-CONFIG_NETXEN_NIC=m
-
-#
-# Token Ring devices
-#
-# CONFIG_TR is not set
-
-#
-# Wireless LAN (non-hamradio)
-#
-# CONFIG_NET_RADIO is not set
-
-#
-# Wan interfaces
-#
-# CONFIG_WAN is not set
-# CONFIG_FDDI is not set
-# CONFIG_HIPPI is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NET_FC is not set
-# CONFIG_SHAPER is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-
-#
-# ISDN subsystem
-#
-# CONFIG_ISDN is not set
-
-#
-# Telephony Support
-#
-# CONFIG_PHONE is not set
-
-#
-# Input device support
-#
-CONFIG_INPUT=y
-# CONFIG_INPUT_FF_MEMLESS is not set
-
-#
-# Userland interfaces
-#
-CONFIG_INPUT_MOUSEDEV=m
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
-# CONFIG_INPUT_JOYDEV is not set
-# CONFIG_INPUT_TSDEV is not set
-CONFIG_INPUT_EVDEV=m
-# CONFIG_INPUT_EVBUG is not set
-
-#
-# Input Device Drivers
-#
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_INPUT_JOYSTICK is not set
-# CONFIG_INPUT_TOUCHSCREEN is not set
-# CONFIG_INPUT_MISC is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-CONFIG_VT=y
-CONFIG_VT_CONSOLE=y
-CONFIG_HW_CONSOLE=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_NR_UARTS=2
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-CONFIG_SERIAL_8250_EXTENDED=y
-# CONFIG_SERIAL_8250_MANY_PORTS is not set
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-# CONFIG_SERIAL_8250_DETECT_IRQ is not set
-# CONFIG_SERIAL_8250_RSA is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-# CONFIG_SERIAL_JSM is not set
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-
-#
-# IPMI
-#
-# CONFIG_IPMI_HANDLER is not set
-
-#
-# Watchdog Cards
-#
-CONFIG_WATCHDOG=y
-# CONFIG_WATCHDOG_NOWAYOUT is not set
-
-#
-# Watchdog Device Drivers
-#
-# CONFIG_SOFT_WATCHDOG is not set
-CONFIG_WDT_RM9K_GPI=m
-
-#
-# PCI-based Watchdog Cards
-#
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_WDTPCI is not set
-
-#
-# USB-based Watchdog Cards
-#
-# CONFIG_USBPCWATCHDOG is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_RTC is not set
-# CONFIG_GEN_RTC is not set
-# CONFIG_DTLK is not set
-# CONFIG_R3964 is not set
-# CONFIG_APPLICOM is not set
-# CONFIG_DRM is not set
-# CONFIG_RAW_DRIVER is not set
-
-#
-# TPM devices
-#
-# CONFIG_TCG_TPM is not set
-
-#
-# I2C support
-#
-# CONFIG_I2C is not set
-
-#
-# SPI support
-#
-# CONFIG_SPI is not set
-# CONFIG_SPI_MASTER is not set
-
-#
-# Dallas's 1-wire bus
-#
-# CONFIG_W1 is not set
-
-#
-# Hardware Monitoring support
-#
-# CONFIG_HWMON is not set
-# CONFIG_HWMON_VID is not set
-
-#
-# Multimedia devices
-#
-# CONFIG_VIDEO_DEV is not set
-
-#
-# Digital Video Broadcasting Devices
-#
-# CONFIG_DVB is not set
-# CONFIG_USB_DABUSB is not set
-
-#
-# Graphics support
-#
-# CONFIG_FIRMWARE_EDID is not set
-CONFIG_FB=y
-# CONFIG_FB_CFB_FILLRECT is not set
-# CONFIG_FB_CFB_COPYAREA is not set
-# CONFIG_FB_CFB_IMAGEBLIT is not set
-# CONFIG_FB_SVGALIB is not set
-# CONFIG_FB_MACMODES is not set
-# CONFIG_FB_BACKLIGHT is not set
-# CONFIG_FB_MODE_HELPERS is not set
-# CONFIG_FB_TILEBLITTING is not set
-# CONFIG_FB_CIRRUS is not set
-# CONFIG_FB_PM2 is not set
-# CONFIG_FB_CYBER2000 is not set
-# CONFIG_FB_ASILIANT is not set
-# CONFIG_FB_IMSTT is not set
-# CONFIG_FB_S1D13XXX is not set
-# CONFIG_FB_NVIDIA is not set
-# CONFIG_FB_RIVA is not set
-# CONFIG_FB_MATROX is not set
-# CONFIG_FB_RADEON is not set
-# CONFIG_FB_ATY128 is not set
-# CONFIG_FB_ATY is not set
-# CONFIG_FB_S3 is not set
-# CONFIG_FB_SAVAGE is not set
-# CONFIG_FB_SIS is not set
-# CONFIG_FB_NEOMAGIC is not set
-# CONFIG_FB_KYRO is not set
-# CONFIG_FB_3DFX is not set
-# CONFIG_FB_VOODOO1 is not set
-# CONFIG_FB_SMIVGX is not set
-# CONFIG_FB_TRIDENT is not set
-# CONFIG_FB_VIRTUAL is not set
-
-#
-# Console display driver support
-#
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_DUMMY_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE=m
-# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
-# CONFIG_FONTS is not set
-CONFIG_FONT_8x8=y
-CONFIG_FONT_8x16=y
-
-#
-# Logo configuration
-#
-# CONFIG_LOGO is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Sound
-#
-# CONFIG_SOUND is not set
-
-#
-# HID Devices
-#
-CONFIG_HID=y
-# CONFIG_HID_DEBUG is not set
-
-#
-# USB support
-#
-CONFIG_USB_ARCH_HAS_HCD=y
-CONFIG_USB_ARCH_HAS_OHCI=y
-CONFIG_USB_ARCH_HAS_EHCI=y
-CONFIG_USB=y
-# CONFIG_USB_DEBUG is not set
-
-#
-# Miscellaneous USB options
-#
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_DYNAMIC_MINORS is not set
-# CONFIG_USB_SUSPEND is not set
-# CONFIG_USB_OTG is not set
-
-#
-# USB Host Controller Drivers
-#
-CONFIG_USB_EHCI_HCD=y
-# CONFIG_USB_EHCI_SPLIT_ISO is not set
-# CONFIG_USB_EHCI_ROOT_HUB_TT is not set
-# CONFIG_USB_EHCI_TT_NEWSCHED is not set
-# CONFIG_USB_EHCI_BIG_ENDIAN_MMIO is not set
-# CONFIG_USB_ISP116X_HCD is not set
-CONFIG_USB_OHCI_HCD=y
-# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set
-# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set
-CONFIG_USB_OHCI_LITTLE_ENDIAN=y
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USB_SL811_HCD is not set
-
-#
-# USB Device Class drivers
-#
-# CONFIG_USB_ACM is not set
-# CONFIG_USB_PRINTER is not set
-
-#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
-#
-
-#
-# may also be needed; see USB_STORAGE Help for more information
-#
-CONFIG_USB_STORAGE=y
-# CONFIG_USB_STORAGE_DEBUG is not set
-# CONFIG_USB_STORAGE_DATAFAB is not set
-# CONFIG_USB_STORAGE_FREECOM is not set
-# CONFIG_USB_STORAGE_DPCM is not set
-# CONFIG_USB_STORAGE_USBAT is not set
-# CONFIG_USB_STORAGE_SDDR09 is not set
-# CONFIG_USB_STORAGE_SDDR55 is not set
-# CONFIG_USB_STORAGE_JUMPSHOT is not set
-# CONFIG_USB_STORAGE_ALAUDA is not set
-# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_LIBUSUAL is not set
-
-#
-# USB Input Devices
-#
-CONFIG_USB_HID=m
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
-# CONFIG_USB_HIDDEV is not set
-
-#
-# USB HID Boot Protocol drivers
-#
-# CONFIG_USB_KBD is not set
-# CONFIG_USB_MOUSE is not set
-# CONFIG_USB_AIPTEK is not set
-# CONFIG_USB_WACOM is not set
-# CONFIG_USB_ACECAD is not set
-# CONFIG_USB_KBTAB is not set
-# CONFIG_USB_POWERMATE is not set
-# CONFIG_USB_TOUCHSCREEN is not set
-# CONFIG_USB_YEALINK is not set
-# CONFIG_USB_XPAD is not set
-# CONFIG_USB_ATI_REMOTE is not set
-# CONFIG_USB_ATI_REMOTE2 is not set
-# CONFIG_USB_KEYSPAN_REMOTE is not set
-# CONFIG_USB_APPLETOUCH is not set
-# CONFIG_USB_GTCO is not set
-
-#
-# USB Imaging devices
-#
-# CONFIG_USB_MDC800 is not set
-# CONFIG_USB_MICROTEK is not set
-
-#
-# USB Network Adapters
-#
-# CONFIG_USB_CATC is not set
-# CONFIG_USB_KAWETH is not set
-# CONFIG_USB_PEGASUS is not set
-# CONFIG_USB_RTL8150 is not set
-# CONFIG_USB_USBNET_MII is not set
-# CONFIG_USB_USBNET is not set
-# CONFIG_USB_MON is not set
-
-#
-# USB port drivers
-#
-
-#
-# USB Serial Converter support
-#
-# CONFIG_USB_SERIAL is not set
-
-#
-# USB Miscellaneous drivers
-#
-# CONFIG_USB_EMI62 is not set
-# CONFIG_USB_EMI26 is not set
-# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
-# CONFIG_USB_RIO500 is not set
-# CONFIG_USB_LEGOTOWER is not set
-# CONFIG_USB_LCD is not set
-# CONFIG_USB_BERRY_CHARGE is not set
-# CONFIG_USB_LED is not set
-# CONFIG_USB_CYPRESS_CY7C63 is not set
-# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
-# CONFIG_USB_IDMOUSE is not set
-# CONFIG_USB_FTDI_ELAN is not set
-# CONFIG_USB_APPLEDISPLAY is not set
-# CONFIG_USB_SISUSBVGA is not set
-# CONFIG_USB_LD is not set
-# CONFIG_USB_TRANCEVIBRATOR is not set
-# CONFIG_USB_TEST is not set
-
-#
-# USB DSL modem support
-#
-
-#
-# USB Gadget Support
-#
-# CONFIG_USB_GADGET is not set
-
-#
-# MMC/SD Card support
-#
-# CONFIG_MMC is not set
-
-#
-# LED devices
-#
-# CONFIG_NEW_LEDS is not set
-
-#
-# LED drivers
-#
-
-#
-# LED Triggers
-#
-
-#
-# InfiniBand support
-#
-# CONFIG_INFINIBAND is not set
-
-#
-# EDAC - error detection and reporting (RAS) (EXPERIMENTAL)
-#
-
-#
-# Real Time Clock
-#
-# CONFIG_RTC_CLASS is not set
-
-#
-# DMA Engine support
-#
-# CONFIG_DMA_ENGINE is not set
-
-#
-# DMA Clients
-#
-
-#
-# DMA Devices
-#
-
-#
-# Auxiliary Display support
-#
-
-#
-# Virtualization
-#
-
-#
-# File systems
-#
-CONFIG_EXT2_FS=y
-# CONFIG_EXT2_FS_XATTR is not set
-# CONFIG_EXT2_FS_XIP is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-CONFIG_FS_POSIX_ACL=y
-# CONFIG_XFS_FS is not set
-# CONFIG_GFS2_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_ROMFS_FS is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_DNOTIFY is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-CONFIG_GENERIC_ACL=y
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-CONFIG_FAT_FS=m
-CONFIG_MSDOS_FS=m
-CONFIG_VFAT_FS=m
-CONFIG_FAT_DEFAULT_CODEPAGE=437
-CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-# CONFIG_HUGETLB_PAGE is not set
-CONFIG_RAMFS=y
-CONFIG_CONFIGFS_FS=m
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-
-#
-# Network File Systems
-#
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-# CONFIG_NFS_V3_ACL is not set
-# CONFIG_NFS_V4 is not set
-# CONFIG_NFS_DIRECTIO is not set
-# CONFIG_NFSD is not set
-CONFIG_ROOT_NFS=y
-CONFIG_LOCKD=y
-CONFIG_LOCKD_V4=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-# CONFIG_9P_FS is not set
-
-#
-# Partition Types
-#
-CONFIG_PARTITION_ADVANCED=y
-# CONFIG_ACORN_PARTITION is not set
-# CONFIG_OSF_PARTITION is not set
-# CONFIG_AMIGA_PARTITION is not set
-# CONFIG_ATARI_PARTITION is not set
-# CONFIG_MAC_PARTITION is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_BSD_DISKLABEL is not set
-# CONFIG_MINIX_SUBPARTITION is not set
-# CONFIG_SOLARIS_X86_PARTITION is not set
-# CONFIG_UNIXWARE_DISKLABEL is not set
-# CONFIG_LDM_PARTITION is not set
-# CONFIG_SGI_PARTITION is not set
-# CONFIG_ULTRIX_PARTITION is not set
-# CONFIG_SUN_PARTITION is not set
-# CONFIG_KARMA_PARTITION is not set
-# CONFIG_EFI_PARTITION is not set
-
-#
-# Native Language Support
-#
-CONFIG_NLS=y
-CONFIG_NLS_DEFAULT="iso8859-1"
-CONFIG_NLS_CODEPAGE_437=m
-# CONFIG_NLS_CODEPAGE_737 is not set
-# CONFIG_NLS_CODEPAGE_775 is not set
-CONFIG_NLS_CODEPAGE_850=m
-# CONFIG_NLS_CODEPAGE_852 is not set
-# CONFIG_NLS_CODEPAGE_855 is not set
-# CONFIG_NLS_CODEPAGE_857 is not set
-# CONFIG_NLS_CODEPAGE_860 is not set
-# CONFIG_NLS_CODEPAGE_861 is not set
-# CONFIG_NLS_CODEPAGE_862 is not set
-# CONFIG_NLS_CODEPAGE_863 is not set
-# CONFIG_NLS_CODEPAGE_864 is not set
-# CONFIG_NLS_CODEPAGE_865 is not set
-# CONFIG_NLS_CODEPAGE_866 is not set
-# CONFIG_NLS_CODEPAGE_869 is not set
-# CONFIG_NLS_CODEPAGE_936 is not set
-# CONFIG_NLS_CODEPAGE_950 is not set
-# CONFIG_NLS_CODEPAGE_932 is not set
-# CONFIG_NLS_CODEPAGE_949 is not set
-# CONFIG_NLS_CODEPAGE_874 is not set
-# CONFIG_NLS_ISO8859_8 is not set
-# CONFIG_NLS_CODEPAGE_1250 is not set
-# CONFIG_NLS_CODEPAGE_1251 is not set
-# CONFIG_NLS_ASCII is not set
-CONFIG_NLS_ISO8859_1=m
-# CONFIG_NLS_ISO8859_2 is not set
-# CONFIG_NLS_ISO8859_3 is not set
-# CONFIG_NLS_ISO8859_4 is not set
-# CONFIG_NLS_ISO8859_5 is not set
-# CONFIG_NLS_ISO8859_6 is not set
-# CONFIG_NLS_ISO8859_7 is not set
-# CONFIG_NLS_ISO8859_9 is not set
-# CONFIG_NLS_ISO8859_13 is not set
-# CONFIG_NLS_ISO8859_14 is not set
-# CONFIG_NLS_ISO8859_15 is not set
-# CONFIG_NLS_KOI8_R is not set
-# CONFIG_NLS_KOI8_U is not set
-# CONFIG_NLS_UTF8 is not set
-
-#
-# Distributed Lock Manager
-#
-CONFIG_DLM=m
-CONFIG_DLM_TCP=y
-# CONFIG_DLM_SCTP is not set
-# CONFIG_DLM_DEBUG is not set
-
-#
-# Profiling support
-#
-# CONFIG_PROFILING is not set
-
-#
-# Kernel hacking
-#
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-# CONFIG_PRINTK_TIME is not set
-CONFIG_ENABLE_MUST_CHECK=y
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_CROSSCOMPILE=y
-CONFIG_CMDLINE=""
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-
-#
-# Cryptographic options
-#
-CONFIG_CRYPTO=y
-CONFIG_CRYPTO_ALGAPI=y
-CONFIG_CRYPTO_BLKCIPHER=m
-CONFIG_CRYPTO_HASH=m
-CONFIG_CRYPTO_MANAGER=m
-# CONFIG_CRYPTO_HMAC is not set
-CONFIG_CRYPTO_XCBC=m
-# CONFIG_CRYPTO_NULL is not set
-# CONFIG_CRYPTO_MD4 is not set
-CONFIG_CRYPTO_MD5=y
-# CONFIG_CRYPTO_SHA1 is not set
-# CONFIG_CRYPTO_SHA256 is not set
-# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
-# CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=m
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_LRW=m
-# CONFIG_CRYPTO_DES is not set
-CONFIG_CRYPTO_FCRYPT=m
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
-# CONFIG_CRYPTO_AES is not set
-# CONFIG_CRYPTO_CAST5 is not set
-# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-# CONFIG_CRYPTO_ARC4 is not set
-# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_DEFLATE is not set
-# CONFIG_CRYPTO_MICHAEL_MIC is not set
-# CONFIG_CRYPTO_CRC32C is not set
-CONFIG_CRYPTO_CAMELLIA=m
-# CONFIG_CRYPTO_TEST is not set
-
-#
-# Hardware crypto devices
-#
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-CONFIG_CRC32=y
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
diff --git a/arch/mips/configs/fuloong2e_defconfig b/arch/mips/configs/fuloong2e_defconfig
index b3626de..17341a0 100644
--- a/arch/mips/configs/fuloong2e_defconfig
+++ b/arch/mips/configs/fuloong2e_defconfig
@@ -10,7 +10,6 @@ CONFIG_MIPS=y
#
# CONFIG_MACH_ALCHEMY is not set
# CONFIG_AR7 is not set
-# CONFIG_BASLER_EXCITE is not set
# CONFIG_BCM47XX is not set
# CONFIG_BCM63XX is not set
# CONFIG_MIPS_COBALT is not set
diff --git a/arch/mips/configs/ip22_defconfig b/arch/mips/configs/ip22_defconfig
index f14d38b..3471ac9 100644
--- a/arch/mips/configs/ip22_defconfig
+++ b/arch/mips/configs/ip22_defconfig
@@ -9,7 +9,6 @@ CONFIG_MIPS=y
# Machine selection
#
# CONFIG_MACH_ALCHEMY is not set
-# CONFIG_BASLER_EXCITE is not set
# CONFIG_BCM47XX is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
diff --git a/arch/mips/configs/ip27_defconfig b/arch/mips/configs/ip27_defconfig
index 1fc73aa..26127a8 100644
--- a/arch/mips/configs/ip27_defconfig
+++ b/arch/mips/configs/ip27_defconfig
@@ -9,7 +9,6 @@ CONFIG_MIPS=y
# Machine selection
#
# CONFIG_MACH_ALCHEMY is not set
-# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
diff --git a/arch/mips/configs/ip28_defconfig b/arch/mips/configs/ip28_defconfig
index 539dccb..ac6c850 100644
--- a/arch/mips/configs/ip28_defconfig
+++ b/arch/mips/configs/ip28_defconfig
@@ -9,7 +9,6 @@ CONFIG_MIPS=y
# Machine selection
#
# CONFIG_MACH_ALCHEMY is not set
-# CONFIG_BASLER_EXCITE is not set
# CONFIG_BCM47XX is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
diff --git a/arch/mips/configs/ip32_defconfig b/arch/mips/configs/ip32_defconfig
index d934bde..56553b1 100644
--- a/arch/mips/configs/ip32_defconfig
+++ b/arch/mips/configs/ip32_defconfig
@@ -9,7 +9,6 @@ CONFIG_MIPS=y
# Machine selection
#
# CONFIG_MACH_ALCHEMY is not set
-# CONFIG_BASLER_EXCITE is not set
# CONFIG_BCM47XX is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
diff --git a/arch/mips/configs/jazz_defconfig b/arch/mips/configs/jazz_defconfig
index d22df61..9db23fd 100644
--- a/arch/mips/configs/jazz_defconfig
+++ b/arch/mips/configs/jazz_defconfig
@@ -22,7 +22,6 @@ CONFIG_ZONE_DMA=y
# CONFIG_MIPS_DB1550 is not set
# CONFIG_MIPS_DB1200 is not set
# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
CONFIG_MACH_JAZZ=y
diff --git a/arch/mips/configs/jmr3927_defconfig b/arch/mips/configs/jmr3927_defconfig
index 5380f1f..11fec0e 100644
--- a/arch/mips/configs/jmr3927_defconfig
+++ b/arch/mips/configs/jmr3927_defconfig
@@ -9,7 +9,6 @@ CONFIG_MIPS=y
# Machine selection
#
# CONFIG_MACH_ALCHEMY is not set
-# CONFIG_BASLER_EXCITE is not set
# CONFIG_BCM47XX is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
diff --git a/arch/mips/configs/lasat_defconfig b/arch/mips/configs/lasat_defconfig
index 044074d..2fe15a5 100644
--- a/arch/mips/configs/lasat_defconfig
+++ b/arch/mips/configs/lasat_defconfig
@@ -9,7 +9,6 @@ CONFIG_MIPS=y
# Machine selection
#
# CONFIG_MACH_ALCHEMY is not set
-# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
diff --git a/arch/mips/configs/lemote2f_defconfig b/arch/mips/configs/lemote2f_defconfig
index 89e88a0..ddb1c92 100644
--- a/arch/mips/configs/lemote2f_defconfig
+++ b/arch/mips/configs/lemote2f_defconfig
@@ -10,7 +10,6 @@ CONFIG_MIPS=y
#
# CONFIG_MACH_ALCHEMY is not set
# CONFIG_AR7 is not set
-# CONFIG_BASLER_EXCITE is not set
# CONFIG_BCM47XX is not set
# CONFIG_BCM63XX is not set
# CONFIG_MIPS_COBALT is not set
diff --git a/arch/mips/configs/malta_defconfig b/arch/mips/configs/malta_defconfig
index 3f01870..38d9873 100644
--- a/arch/mips/configs/malta_defconfig
+++ b/arch/mips/configs/malta_defconfig
@@ -10,7 +10,6 @@ CONFIG_MIPS=y
#
CONFIG_ZONE_DMA=y
# CONFIG_MACH_ALCHEMY is not set
-# CONFIG_BASLER_EXCITE is not set
# CONFIG_BCM47XX is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
diff --git a/arch/mips/configs/markeins_defconfig b/arch/mips/configs/markeins_defconfig
index d001f7e8..9137571 100644
--- a/arch/mips/configs/markeins_defconfig
+++ b/arch/mips/configs/markeins_defconfig
@@ -22,7 +22,6 @@ CONFIG_ZONE_DMA=y
# CONFIG_MIPS_DB1550 is not set
# CONFIG_MIPS_DB1200 is not set
# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
diff --git a/arch/mips/configs/mipssim_defconfig b/arch/mips/configs/mipssim_defconfig
index 7358454..513e9a4 100644
--- a/arch/mips/configs/mipssim_defconfig
+++ b/arch/mips/configs/mipssim_defconfig
@@ -9,7 +9,6 @@ CONFIG_MIPS=y
# Machine selection
#
# CONFIG_MACH_ALCHEMY is not set
-# CONFIG_BASLER_EXCITE is not set
# CONFIG_BCM47XX is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
diff --git a/arch/mips/configs/mpc30x_defconfig b/arch/mips/configs/mpc30x_defconfig
index 8c720e5..b893f9d 100644
--- a/arch/mips/configs/mpc30x_defconfig
+++ b/arch/mips/configs/mpc30x_defconfig
@@ -9,7 +9,6 @@ CONFIG_MIPS=y
# Machine selection
#
# CONFIG_MACH_ALCHEMY is not set
-# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
diff --git a/arch/mips/configs/msp71xx_defconfig b/arch/mips/configs/msp71xx_defconfig
index ecbc030..89d2b6a 100644
--- a/arch/mips/configs/msp71xx_defconfig
+++ b/arch/mips/configs/msp71xx_defconfig
@@ -22,7 +22,6 @@ CONFIG_ZONE_DMA=y
# CONFIG_MIPS_DB1550 is not set
# CONFIG_MIPS_DB1200 is not set
# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
diff --git a/arch/mips/configs/mtx1_defconfig b/arch/mips/configs/mtx1_defconfig
index 9477f04..3199668 100644
--- a/arch/mips/configs/mtx1_defconfig
+++ b/arch/mips/configs/mtx1_defconfig
@@ -9,7 +9,6 @@ CONFIG_MIPS=y
# Machine selection
#
CONFIG_MACH_ALCHEMY=y
-# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
diff --git a/arch/mips/configs/pb1100_defconfig b/arch/mips/configs/pb1100_defconfig
index be8091e..c36e859 100644
--- a/arch/mips/configs/pb1100_defconfig
+++ b/arch/mips/configs/pb1100_defconfig
@@ -23,7 +23,6 @@ CONFIG_MIPS_PB1100=y
# CONFIG_MIPS_DB1550 is not set
# CONFIG_MIPS_DB1200 is not set
# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
diff --git a/arch/mips/configs/pb1500_defconfig b/arch/mips/configs/pb1500_defconfig
index e74ba79..4b43e36 100644
--- a/arch/mips/configs/pb1500_defconfig
+++ b/arch/mips/configs/pb1500_defconfig
@@ -23,7 +23,6 @@ CONFIG_MIPS_PB1500=y
# CONFIG_MIPS_DB1550 is not set
# CONFIG_MIPS_DB1200 is not set
# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
diff --git a/arch/mips/configs/pb1550_defconfig b/arch/mips/configs/pb1550_defconfig
index 1d896fd..7c8d351 100644
--- a/arch/mips/configs/pb1550_defconfig
+++ b/arch/mips/configs/pb1550_defconfig
@@ -23,7 +23,6 @@ CONFIG_MIPS_PB1550=y
# CONFIG_MIPS_DB1550 is not set
# CONFIG_MIPS_DB1200 is not set
# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
diff --git a/arch/mips/configs/pnx8335-stb225_defconfig b/arch/mips/configs/pnx8335-stb225_defconfig
index fef4d31..77a75f0 100644
--- a/arch/mips/configs/pnx8335-stb225_defconfig
+++ b/arch/mips/configs/pnx8335-stb225_defconfig
@@ -9,7 +9,6 @@ CONFIG_MIPS=y
# Machine selection
#
# CONFIG_MACH_ALCHEMY is not set
-# CONFIG_BASLER_EXCITE is not set
# CONFIG_BCM47XX is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
diff --git a/arch/mips/configs/pnx8550-jbs_defconfig b/arch/mips/configs/pnx8550-jbs_defconfig
index e10c711..945b27e 100644
--- a/arch/mips/configs/pnx8550-jbs_defconfig
+++ b/arch/mips/configs/pnx8550-jbs_defconfig
@@ -22,7 +22,6 @@ CONFIG_ZONE_DMA=y
# CONFIG_MIPS_DB1550 is not set
# CONFIG_MIPS_DB1200 is not set
# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
diff --git a/arch/mips/configs/pnx8550-stb810_defconfig b/arch/mips/configs/pnx8550-stb810_defconfig
index 5ed3c8d..ff0fc0b 100644
--- a/arch/mips/configs/pnx8550-stb810_defconfig
+++ b/arch/mips/configs/pnx8550-stb810_defconfig
@@ -22,7 +22,6 @@ CONFIG_ZONE_DMA=y
# CONFIG_MIPS_DB1550 is not set
# CONFIG_MIPS_DB1200 is not set
# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
diff --git a/arch/mips/configs/powertv_defconfig b/arch/mips/configs/powertv_defconfig
index 3aff69ab..86c8007 100644
--- a/arch/mips/configs/powertv_defconfig
+++ b/arch/mips/configs/powertv_defconfig
@@ -10,7 +10,6 @@ CONFIG_MIPS=y
#
# CONFIG_MACH_ALCHEMY is not set
# CONFIG_AR7 is not set
-# CONFIG_BASLER_EXCITE is not set
# CONFIG_BCM47XX is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
diff --git a/arch/mips/configs/rb532_defconfig b/arch/mips/configs/rb532_defconfig
index f40c3a0..a9408db 100644
--- a/arch/mips/configs/rb532_defconfig
+++ b/arch/mips/configs/rb532_defconfig
@@ -9,7 +9,6 @@ CONFIG_MIPS=y
# Machine selection
#
# CONFIG_MACH_ALCHEMY is not set
-# CONFIG_BASLER_EXCITE is not set
# CONFIG_BCM47XX is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
diff --git a/arch/mips/configs/rbtx49xx_defconfig b/arch/mips/configs/rbtx49xx_defconfig
index 4f3b970..1c9a542 100644
--- a/arch/mips/configs/rbtx49xx_defconfig
+++ b/arch/mips/configs/rbtx49xx_defconfig
@@ -10,7 +10,6 @@ CONFIG_MIPS=y
#
# CONFIG_MACH_ALCHEMY is not set
# CONFIG_AR7 is not set
-# CONFIG_BASLER_EXCITE is not set
# CONFIG_BCM47XX is not set
# CONFIG_BCM63XX is not set
# CONFIG_MIPS_COBALT is not set
diff --git a/arch/mips/configs/rm200_defconfig b/arch/mips/configs/rm200_defconfig
index e53b8d0..5873fc5 100644
--- a/arch/mips/configs/rm200_defconfig
+++ b/arch/mips/configs/rm200_defconfig
@@ -22,7 +22,6 @@ CONFIG_ZONE_DMA=y
# CONFIG_MIPS_DB1550 is not set
# CONFIG_MIPS_DB1200 is not set
# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
diff --git a/arch/mips/configs/sb1250-swarm_defconfig b/arch/mips/configs/sb1250-swarm_defconfig
index 7f38c0b..5244716 100644
--- a/arch/mips/configs/sb1250-swarm_defconfig
+++ b/arch/mips/configs/sb1250-swarm_defconfig
@@ -9,7 +9,6 @@ CONFIG_MIPS=y
# Machine selection
#
# CONFIG_MACH_ALCHEMY is not set
-# CONFIG_BASLER_EXCITE is not set
# CONFIG_BCM47XX is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
diff --git a/arch/mips/configs/tb0219_defconfig b/arch/mips/configs/tb0219_defconfig
index b505988..937b47c 100644
--- a/arch/mips/configs/tb0219_defconfig
+++ b/arch/mips/configs/tb0219_defconfig
@@ -9,7 +9,6 @@ CONFIG_MIPS=y
# Machine selection
#
# CONFIG_MACH_ALCHEMY is not set
-# CONFIG_BASLER_EXCITE is not set
# CONFIG_BCM47XX is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
diff --git a/arch/mips/configs/tb0226_defconfig b/arch/mips/configs/tb0226_defconfig
index b06a716..da73584 100644
--- a/arch/mips/configs/tb0226_defconfig
+++ b/arch/mips/configs/tb0226_defconfig
@@ -9,7 +9,6 @@ CONFIG_MIPS=y
# Machine selection
#
# CONFIG_MACH_ALCHEMY is not set
-# CONFIG_BASLER_EXCITE is not set
# CONFIG_BCM47XX is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
diff --git a/arch/mips/configs/tb0287_defconfig b/arch/mips/configs/tb0287_defconfig
index 46512cf..99a0d21 100644
--- a/arch/mips/configs/tb0287_defconfig
+++ b/arch/mips/configs/tb0287_defconfig
@@ -9,7 +9,6 @@ CONFIG_MIPS=y
# Machine selection
#
# CONFIG_MACH_ALCHEMY is not set
-# CONFIG_BASLER_EXCITE is not set
# CONFIG_BCM47XX is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
diff --git a/arch/mips/configs/workpad_defconfig b/arch/mips/configs/workpad_defconfig
index b437eb7..d3646ea 100644
--- a/arch/mips/configs/workpad_defconfig
+++ b/arch/mips/configs/workpad_defconfig
@@ -9,7 +9,6 @@ CONFIG_MIPS=y
# Machine selection
#
# CONFIG_MACH_ALCHEMY is not set
-# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
diff --git a/arch/mips/configs/wrppmc_defconfig b/arch/mips/configs/wrppmc_defconfig
index 06acc74..c137831 100644
--- a/arch/mips/configs/wrppmc_defconfig
+++ b/arch/mips/configs/wrppmc_defconfig
@@ -22,7 +22,6 @@ CONFIG_ZONE_DMA=y
# CONFIG_MIPS_DB1550 is not set
# CONFIG_MIPS_DB1200 is not set
# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
diff --git a/arch/mips/configs/yosemite_defconfig b/arch/mips/configs/yosemite_defconfig
index 69feaf8..4a04f0c 100644
--- a/arch/mips/configs/yosemite_defconfig
+++ b/arch/mips/configs/yosemite_defconfig
@@ -22,7 +22,6 @@ CONFIG_ZONE_DMA=y
# CONFIG_MIPS_DB1550 is not set
# CONFIG_MIPS_DB1200 is not set
# CONFIG_MIPS_MIRAGE is not set
-# CONFIG_BASLER_EXCITE is not set
# CONFIG_MIPS_COBALT is not set
# CONFIG_MACH_DECSTATION is not set
# CONFIG_MACH_JAZZ is not set
diff --git a/arch/mips/include/asm/mach-excite/cpu-feature-overrides.h b/arch/mips/include/asm/mach-excite/cpu-feature-overrides.h
deleted file mode 100644
index 107104c..0000000
--- a/arch/mips/include/asm/mach-excite/cpu-feature-overrides.h
+++ /dev/null
@@ -1,48 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2004 Thomas Koeller <thomas.koeller@baslerweb.com>
- * Copyright (C) 2007 Ralf Baechle (ralf@linux-mips.org)
- */
-#ifndef __ASM_MACH_EXCITE_CPU_FEATURE_OVERRIDES_H
-#define __ASM_MACH_EXCITE_CPU_FEATURE_OVERRIDES_H
-
-/*
- * Basler eXcite has an RM9122 processor.
- */
-#define cpu_has_watch 1
-#define cpu_has_mips16 0
-#define cpu_has_divec 0
-#define cpu_has_vce 0
-#define cpu_has_cache_cdex_p 0
-#define cpu_has_cache_cdex_s 0
-#define cpu_has_prefetch 1
-#define cpu_has_mcheck 0
-#define cpu_has_ejtag 0
-
-#define cpu_has_llsc 1
-#define cpu_has_vtag_icache 0
-#define cpu_has_dc_aliases 0
-#define cpu_has_ic_fills_f_dc 0
-#define cpu_has_dsp 0
-#define cpu_icache_snoops_remote_store 0
-#define cpu_has_mipsmt 0
-#define cpu_has_userlocal 0
-
-#define cpu_has_nofpuex 0
-#define cpu_has_64bits 1
-
-#define cpu_has_mips32r1 0
-#define cpu_has_mips32r2 0
-#define cpu_has_mips64r1 0
-#define cpu_has_mips64r2 0
-
-#define cpu_has_inclusive_pcaches 0
-
-#define cpu_dcache_line_size() 32
-#define cpu_icache_line_size() 32
-#define cpu_scache_line_size() 32
-
-#endif /* __ASM_MACH_EXCITE_CPU_FEATURE_OVERRIDES_H */
diff --git a/arch/mips/include/asm/mach-excite/excite.h b/arch/mips/include/asm/mach-excite/excite.h
deleted file mode 100644
index 4c29ba4..0000000
--- a/arch/mips/include/asm/mach-excite/excite.h
+++ /dev/null
@@ -1,154 +0,0 @@
-#ifndef __EXCITE_H__
-#define __EXCITE_H__
-
-#include <linux/init.h>
-#include <asm/addrspace.h>
-#include <asm/types.h>
-
-#define EXCITE_CPU_EXT_CLOCK 100000000
-
-#if !defined(__ASSEMBLY__)
-void __init excite_kgdb_init(void);
-void excite_procfs_init(void);
-extern unsigned long memsize;
-extern char modetty[];
-extern u32 unit_id;
-#endif
-
-/* Base name for XICAP devices */
-#define XICAP_NAME "xicap_gpi"
-
-/* OCD register offsets */
-#define LKB0 0x0038
-#define LKB5 0x0128
-#define LKM5 0x012C
-#define LKB7 0x0138
-#define LKM7 0x013c
-#define LKB8 0x0140
-#define LKM8 0x0144
-#define LKB9 0x0148
-#define LKM9 0x014c
-#define LKB10 0x0150
-#define LKM10 0x0154
-#define LKB11 0x0158
-#define LKM11 0x015c
-#define LKB12 0x0160
-#define LKM12 0x0164
-#define LKB13 0x0168
-#define LKM13 0x016c
-#define LDP0 0x0200
-#define LDP1 0x0210
-#define LDP2 0x0220
-#define LDP3 0x0230
-#define INTPIN0 0x0A40
-#define INTPIN1 0x0A44
-#define INTPIN2 0x0A48
-#define INTPIN3 0x0A4C
-#define INTPIN4 0x0A50
-#define INTPIN5 0x0A54
-#define INTPIN6 0x0A58
-#define INTPIN7 0x0A5C
-
-
-
-
-/* TITAN register offsets */
-#define CPRR 0x0004
-#define CPDSR 0x0008
-#define CPTC0R 0x000c
-#define CPTC1R 0x0010
-#define CPCFG0 0x0020
-#define CPCFG1 0x0024
-#define CPDST0A 0x0028
-#define CPDST0B 0x002c
-#define CPDST1A 0x0030
-#define CPDST1B 0x0034
-#define CPXDSTA 0x0038
-#define CPXDSTB 0x003c
-#define CPXCISRA 0x0048
-#define CPXCISRB 0x004c
-#define CPGIG0ER 0x0050
-#define CPGIG1ER 0x0054
-#define CPGRWL 0x0068
-#define CPURSLMT 0x00f8
-#define UACFG 0x0200
-#define UAINTS 0x0204
-#define SDRXFCIE 0x4828
-#define SDTXFCIE 0x4928
-#define INTP0Status0 0x1B00
-#define INTP0Mask0 0x1B04
-#define INTP0Set0 0x1B08
-#define INTP0Clear0 0x1B0C
-#define GXCFG 0x5000
-#define GXDMADRPFX 0x5018
-#define GXDMA_DESCADR 0x501c
-#define GXCH0TDESSTRT 0x5054
-
-/* IRQ definitions */
-#define NMICONFIG 0xac0
-#define TITAN_MSGINT 0xc4
-#define TITAN_IRQ ((TITAN_MSGINT / 0x20) + 2)
-#define FPGA0_MSGINT 0x5a
-#define FPGA0_IRQ ((FPGA0_MSGINT / 0x20) + 2)
-#define FPGA1_MSGINT 0x7b
-#define FPGA1_IRQ ((FPGA1_MSGINT / 0x20) + 2)
-#define PHY_MSGINT 0x9c
-#define PHY_IRQ ((PHY_MSGINT / 0x20) + 2)
-
-#if defined(CONFIG_BASLER_EXCITE_PROTOTYPE)
-/* Pre-release units used interrupt pin #9 */
-#define USB_IRQ 11
-#else
-/* Re-designed units use interrupt pin #1 */
-#define USB_MSGINT 0x39
-#define USB_IRQ ((USB_MSGINT / 0x20) + 2)
-#endif
-#define TIMER_IRQ 12
-
-
-/* Device address ranges */
-#define EXCITE_OFFS_OCD 0x1fffc000
-#define EXCITE_SIZE_OCD (16 * 1024)
-#define EXCITE_PHYS_OCD CPHYSADDR(EXCITE_OFFS_OCD)
-#define EXCITE_ADDR_OCD CKSEG1ADDR(EXCITE_OFFS_OCD)
-
-#define EXCITE_OFFS_SCRAM 0x1fffa000
-#define EXCITE_SIZE_SCRAM (8 << 10)
-#define EXCITE_PHYS_SCRAM CPHYSADDR(EXCITE_OFFS_SCRAM)
-#define EXCITE_ADDR_SCRAM CKSEG1ADDR(EXCITE_OFFS_SCRAM)
-
-#define EXCITE_OFFS_PCI_IO 0x1fff8000
-#define EXCITE_SIZE_PCI_IO (8 << 10)
-#define EXCITE_PHYS_PCI_IO CPHYSADDR(EXCITE_OFFS_PCI_IO)
-#define EXCITE_ADDR_PCI_IO CKSEG1ADDR(EXCITE_OFFS_PCI_IO)
-
-#define EXCITE_OFFS_TITAN 0x1fff0000
-#define EXCITE_SIZE_TITAN (32 << 10)
-#define EXCITE_PHYS_TITAN CPHYSADDR(EXCITE_OFFS_TITAN)
-#define EXCITE_ADDR_TITAN CKSEG1ADDR(EXCITE_OFFS_TITAN)
-
-#define EXCITE_OFFS_PCI_MEM 0x1ffe0000
-#define EXCITE_SIZE_PCI_MEM (64 << 10)
-#define EXCITE_PHYS_PCI_MEM CPHYSADDR(EXCITE_OFFS_PCI_MEM)
-#define EXCITE_ADDR_PCI_MEM CKSEG1ADDR(EXCITE_OFFS_PCI_MEM)
-
-#define EXCITE_OFFS_FPGA 0x1ffdc000
-#define EXCITE_SIZE_FPGA (16 << 10)
-#define EXCITE_PHYS_FPGA CPHYSADDR(EXCITE_OFFS_FPGA)
-#define EXCITE_ADDR_FPGA CKSEG1ADDR(EXCITE_OFFS_FPGA)
-
-#define EXCITE_OFFS_NAND 0x1ffd8000
-#define EXCITE_SIZE_NAND (16 << 10)
-#define EXCITE_PHYS_NAND CPHYSADDR(EXCITE_OFFS_NAND)
-#define EXCITE_ADDR_NAND CKSEG1ADDR(EXCITE_OFFS_NAND)
-
-#define EXCITE_OFFS_BOOTROM 0x1f000000
-#define EXCITE_SIZE_BOOTROM (8 << 20)
-#define EXCITE_PHYS_BOOTROM CPHYSADDR(EXCITE_OFFS_BOOTROM)
-#define EXCITE_ADDR_BOOTROM CKSEG1ADDR(EXCITE_OFFS_BOOTROM)
-
-/* FPGA address offsets */
-#define EXCITE_FPGA_DPR 0x0104 /* dual-ported ram */
-#define EXCITE_FPGA_SYSCTL 0x0200 /* system control register block */
-
-#endif /* __EXCITE_H__ */
diff --git a/arch/mips/include/asm/mach-excite/excite_fpga.h b/arch/mips/include/asm/mach-excite/excite_fpga.h
deleted file mode 100644
index 0a1ef69..0000000
--- a/arch/mips/include/asm/mach-excite/excite_fpga.h
+++ /dev/null
@@ -1,80 +0,0 @@
-#ifndef EXCITE_FPGA_H_INCLUDED
-#define EXCITE_FPGA_H_INCLUDED
-
-
-/**
- * Address alignment of the individual FPGA bytes.
- * The address arrangement of the individual bytes of the FPGA is two
- * byte aligned at the embedded MK2 platform.
- */
-#ifdef EXCITE_CCI_FPGA_MK2
-typedef unsigned char excite_cci_fpga_align_t __attribute__ ((aligned(2)));
-#else
-typedef unsigned char excite_cci_fpga_align_t;
-#endif
-
-
-/**
- * Size of Dual Ported RAM.
- */
-#define EXCITE_DPR_SIZE 263
-
-
-/**
- * Size of Reserved Status Fields in Dual Ported RAM.
- */
-#define EXCITE_DPR_STATUS_SIZE 7
-
-
-
-/**
- * FPGA.
- * Hardware register layout of the FPGA interface. The FPGA must accessed
- * byte wise solely.
- * @see EXCITE_CCI_DPR_MK2
- */
-typedef struct excite_fpga {
-
- /**
- * Dual Ported RAM.
- */
- excite_cci_fpga_align_t dpr[EXCITE_DPR_SIZE];
-
- /**
- * Status.
- */
- excite_cci_fpga_align_t status[EXCITE_DPR_STATUS_SIZE];
-
-#ifdef EXCITE_CCI_FPGA_MK2
- /**
- * RM9000 Interrupt.
- * Write access initiates interrupt at the RM9000 (MIPS) processor of the eXcite.
- */
- excite_cci_fpga_align_t rm9k_int;
-#else
- /**
- * MK2 Interrupt.
- * Write access initiates interrupt at the ARM processor of the MK2.
- */
- excite_cci_fpga_align_t mk2_int;
-
- excite_cci_fpga_align_t gap[0x1000-0x10f];
-
- /**
- * IRQ Source/Acknowledge.
- */
- excite_cci_fpga_align_t rm9k_irq_src;
-
- /**
- * IRQ Mask.
- * Set bits enable the related interrupt.
- */
- excite_cci_fpga_align_t rm9k_irq_mask;
-#endif
-
-
-} excite_fpga;
-
-
-
-#endif /* ndef EXCITE_FPGA_H_INCLUDED */
diff --git a/arch/mips/include/asm/mach-excite/excite_nandflash.h b/arch/mips/include/asm/mach-excite/excite_nandflash.h
deleted file mode 100644
index c4cf614..0000000
--- a/arch/mips/include/asm/mach-excite/excite_nandflash.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef __EXCITE_NANDFLASH_H__
-#define __EXCITE_NANDFLASH_H__
-
-/* Resource names */
-#define EXCITE_NANDFLASH_RESOURCE_REGS "excite_nandflash_regs"
-
-#endif /* __EXCITE_NANDFLASH_H__ */
diff --git a/arch/mips/include/asm/mach-excite/rm9k_eth.h b/arch/mips/include/asm/mach-excite/rm9k_eth.h
deleted file mode 100644
index 94705a4..0000000
--- a/arch/mips/include/asm/mach-excite/rm9k_eth.h
+++ /dev/null
@@ -1,23 +0,0 @@
-#if !defined(__RM9K_ETH_H__)
-#define __RM9K_ETH_H__
-
-#define RM9K_GE_NAME "rm9k_ge"
-
-/* Resource names */
-#define RM9K_GE_RESOURCE_MAC "rm9k_ge_mac"
-#define RM9K_GE_RESOURCE_MSTAT "rm9k_ge_mstat"
-#define RM9K_GE_RESOURCE_PKTPROC "rm9k_ge_pktproc"
-#define RM9K_GE_RESOURCE_XDMA "rm9k_ge_xdma"
-#define RM9K_GE_RESOURCE_FIFO_RX "rm9k_ge_fifo_rx"
-#define RM9K_GE_RESOURCE_FIFO_TX "rm9k_ge_fifo_tx"
-#define RM9K_GE_RESOURCE_FIFOMEM_RX "rm9k_ge_fifo_memory_rx"
-#define RM9K_GE_RESOURCE_FIFOMEM_TX "rm9k_ge_fifo_memory_tx"
-#define RM9K_GE_RESOURCE_PHY "rm9k_ge_phy"
-#define RM9K_GE_RESOURCE_DMADESC_RX "rm9k_ge_dmadesc_rx"
-#define RM9K_GE_RESOURCE_DMADESC_TX "rm9k_ge_dmadesc_tx"
-#define RM9K_GE_RESOURCE_IRQ_MAIN "rm9k_ge_irq_main"
-#define RM9K_GE_RESOURCE_IRQ_PHY "rm9k_ge_irq_phy"
-#define RM9K_GE_RESOURCE_GPI_SLICE "rm9k_ge_gpi_slice"
-#define RM9K_GE_RESOURCE_MDIO_CHANNEL "rm9k_ge_mdio_channel"
-
-#endif /* !defined(__RM9K_ETH_H__) */
diff --git a/arch/mips/include/asm/mach-excite/rm9k_wdt.h b/arch/mips/include/asm/mach-excite/rm9k_wdt.h
deleted file mode 100644
index 3fa3c08..0000000
--- a/arch/mips/include/asm/mach-excite/rm9k_wdt.h
+++ /dev/null
@@ -1,12 +0,0 @@
-#ifndef __RM9K_WDT_H__
-#define __RM9K_WDT_H__
-
-/* Device name */
-#define WDT_NAME "wdt_gpi"
-
-/* Resource names */
-#define WDT_RESOURCE_REGS "excite_watchdog_regs"
-#define WDT_RESOURCE_IRQ "excite_watchdog_irq"
-#define WDT_RESOURCE_COUNTER "excite_watchdog_counter"
-
-#endif /* __RM9K_WDT_H__ */
diff --git a/arch/mips/include/asm/mach-excite/rm9k_xicap.h b/arch/mips/include/asm/mach-excite/rm9k_xicap.h
deleted file mode 100644
index 0095777..0000000
--- a/arch/mips/include/asm/mach-excite/rm9k_xicap.h
+++ /dev/null
@@ -1,16 +0,0 @@
-#ifndef __EXCITE_XICAP_H__
-#define __EXCITE_XICAP_H__
-
-
-/* Resource names */
-#define XICAP_RESOURCE_FIFO_RX "xicap_fifo_rx"
-#define XICAP_RESOURCE_FIFO_TX "xicap_fifo_tx"
-#define XICAP_RESOURCE_XDMA "xicap_xdma"
-#define XICAP_RESOURCE_DMADESC "xicap_dmadesc"
-#define XICAP_RESOURCE_PKTPROC "xicap_pktproc"
-#define XICAP_RESOURCE_IRQ "xicap_irq"
-#define XICAP_RESOURCE_GPI_SLICE "xicap_gpi_slice"
-#define XICAP_RESOURCE_FIFO_BLK "xicap_fifo_blocks"
-#define XICAP_RESOURCE_PKT_STREAM "xicap_pkt_stream"
-
-#endif /* __EXCITE_XICAP_H__ */
diff --git a/arch/mips/include/asm/mach-excite/war.h b/arch/mips/include/asm/mach-excite/war.h
deleted file mode 100644
index 1f82180..0000000
--- a/arch/mips/include/asm/mach-excite/war.h
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
- */
-#ifndef __ASM_MIPS_MACH_EXCITE_WAR_H
-#define __ASM_MIPS_MACH_EXCITE_WAR_H
-
-#define R4600_V1_INDEX_ICACHEOP_WAR 0
-#define R4600_V1_HIT_CACHEOP_WAR 0
-#define R4600_V2_HIT_CACHEOP_WAR 0
-#define R5432_CP0_INTERRUPT_WAR 0
-#define BCM1250_M3_WAR 0
-#define SIBYTE_1956_WAR 0
-#define MIPS4K_ICACHE_REFILL_WAR 0
-#define MIPS_CACHE_SYNC_WAR 0
-#define TX49XX_ICACHE_INDEX_INV_WAR 0
-#define RM9000_CDEX_SMP_WAR 1
-#define ICACHE_REFILLS_WORKAROUND_WAR 1
-#define R10000_LLSC_WAR 0
-#define MIPS34K_MISSED_ITLB_WAR 0
-
-#endif /* __ASM_MIPS_MACH_EXCITE_WAR_H */
diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile
index c9a0dc1..c9209ca 100644
--- a/arch/mips/pci/Makefile
+++ b/arch/mips/pci/Makefile
@@ -22,7 +22,6 @@ obj-$(CONFIG_BCM63XX) += pci-bcm63xx.o fixup-bcm63xx.o \
#
# These are still pretty much in the old state, watch, go blind.
#
-obj-$(CONFIG_BASLER_EXCITE) += ops-titan.o pci-excite.o fixup-excite.o
obj-$(CONFIG_LASAT) += pci-lasat.o
obj-$(CONFIG_MIPS_COBALT) += fixup-cobalt.o
obj-$(CONFIG_SOC_AU1500) += fixup-au1000.o ops-au1000.o
diff --git a/arch/mips/pci/fixup-excite.c b/arch/mips/pci/fixup-excite.c
deleted file mode 100644
index cd64d9f..0000000
--- a/arch/mips/pci/fixup-excite.c
+++ /dev/null
@@ -1,36 +0,0 @@
-/*
- * Copyright (C) 2004 by Basler Vision Technologies AG
- * Author: Thomas Koeller <thomas.koeller@baslerweb.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <excite.h>
-
-int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
- if (pin == 0)
- return -1;
-
- return USB_IRQ; /* USB controller is the only PCI device */
-}
-
-/* Do platform specific device initialization at pci_enable_device() time */
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
- return 0;
-}
diff --git a/arch/mips/pci/pci-excite.c b/arch/mips/pci/pci-excite.c
deleted file mode 100644
index 8a56876..0000000
--- a/arch/mips/pci/pci-excite.c
+++ /dev/null
@@ -1,149 +0,0 @@
-/*
- * Copyright (C) 2004 by Basler Vision Technologies AG
- * Author: Thomas Koeller <thomas.koeller@baslerweb.com>
- * Based on the PMC-Sierra Yosemite board support by Ralf Baechle.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/bitops.h>
-#include <asm/rm9k-ocd.h>
-#include <excite.h>
-
-
-extern struct pci_ops titan_pci_ops;
-
-
-static struct resource
- mem_resource = {
- .name = "PCI memory",
- .start = EXCITE_PHYS_PCI_MEM,
- .end = EXCITE_PHYS_PCI_MEM + EXCITE_SIZE_PCI_MEM - 1,
- .flags = IORESOURCE_MEM
- },
- io_resource = {
- .name = "PCI I/O",
- .start = EXCITE_PHYS_PCI_IO,
- .end = EXCITE_PHYS_PCI_IO + EXCITE_SIZE_PCI_IO - 1,
- .flags = IORESOURCE_IO
- };
-
-
-static struct pci_controller bx_controller = {
- .pci_ops = &titan_pci_ops,
- .mem_resource = &mem_resource,
- .mem_offset = 0x00000000UL,
- .io_resource = &io_resource,
- .io_offset = 0x00000000UL
-};
-
-
-static char
- iopage_failed[] __initdata = "Cannot allocate PCI I/O page",
- modebits_no_pci[] __initdata = "PCI is not configured in mode bits";
-
-#define RM9000x2_OCD_HTSC 0x0604
-#define RM9000x2_OCD_HTBHL 0x060c
-#define RM9000x2_OCD_PCIHRST 0x078c
-
-#define RM9K_OCD_MODEBIT1 0x00d4 /* (MODEBIT1) Mode Bit 1 */
-#define RM9K_OCD_CPHDCR 0x00f4 /* CPU-PCI/HT Data Control. */
-
-#define PCISC_FB2B 0x00000200
-#define PCISC_MWICG 0x00000010
-#define PCISC_EMC 0x00000004
-#define PCISC_ERMA 0x00000002
-
-
-
-static int __init basler_excite_pci_setup(void)
-{
- const unsigned int fullbars = memsize / (256 << 20);
- unsigned int i;
-
- /* Check modebits to see if PCI is really enabled. */
- if (!((ocd_readl(RM9K_OCD_MODEBIT1) >> (47-32)) & 0x1))
- panic(modebits_no_pci);
-
- if (NULL == request_mem_region(EXCITE_PHYS_PCI_IO, EXCITE_SIZE_PCI_IO,
- "Memory-mapped PCI I/O page"))
- panic(iopage_failed);
-
- /* Enable PCI 0 as master for config cycles */
- ocd_writel(PCISC_EMC | PCISC_ERMA, RM9000x2_OCD_HTSC);
-
-
- /* Set up latency timer */
- ocd_writel(0x8008, RM9000x2_OCD_HTBHL);
-
- /* Setup host IO and Memory space */
- ocd_writel((EXCITE_PHYS_PCI_IO >> 4) | 1, LKB7);
- ocd_writel(((EXCITE_SIZE_PCI_IO >> 4) & 0x7fffff00) - 0x100, LKM7);
- ocd_writel((EXCITE_PHYS_PCI_MEM >> 4) | 1, LKB8);
- ocd_writel(((EXCITE_SIZE_PCI_MEM >> 4) & 0x7fffff00) - 0x100, LKM8);
-
- /* Set up PCI BARs to map all installed memory */
- for (i = 0; i < 6; i++) {
- const unsigned int bar = 0x610 + i * 4;
-
- if (i < fullbars) {
- ocd_writel(0x10000000 * i, bar);
- ocd_writel(0x01000000 * i, bar + 0x140);
- ocd_writel(0x0ffff029, bar + 0x100);
- continue;
- }
-
- if (i == fullbars) {
- int o;
- u32 mask;
-
- const unsigned long rem = memsize - i * 0x10000000;
- if (!rem) {
- ocd_writel(0x00000000, bar + 0x100);
- continue;
- }
-
- o = ffs(rem) - 1;
- if (rem & ~(0x1 << o))
- o++;
- mask = ((0x1 << o) & 0x0ffff000) - 0x1000;
- ocd_writel(0x10000000 * i, bar);
- ocd_writel(0x01000000 * i, bar + 0x140);
- ocd_writel(0x00000029 | mask, bar + 0x100);
- continue;
- }
-
- ocd_writel(0x00000000, bar + 0x100);
- }
-
- /* Finally, enable the PCI interrupt */
-#if USB_IRQ > 7
- set_c0_intcontrol(1 << USB_IRQ);
-#else
- set_c0_status(1 << (USB_IRQ + 8));
-#endif
-
- ioport_resource.start = EXCITE_PHYS_PCI_IO;
- ioport_resource.end = EXCITE_PHYS_PCI_IO + EXCITE_SIZE_PCI_IO - 1;
- set_io_port_base((unsigned long) ioremap_nocache(EXCITE_PHYS_PCI_IO, EXCITE_SIZE_PCI_IO));
- register_pci_controller(&bx_controller);
- return 0;
-}
-
-
-arch_initcall(basler_excite_pci_setup);
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 7678538..677cd53 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -291,14 +291,6 @@ config MTD_NAND_SHARPSL
tristate "Support for NAND Flash on Sharp SL Series (C7xx + others)"
depends on ARCH_PXA
-config MTD_NAND_BASLER_EXCITE
- tristate "Support for NAND Flash on Basler eXcite"
- depends on BASLER_EXCITE
- help
- This enables the driver for the NAND flash device found on the
- Basler eXcite Smart Camera. If built as a module, the driver
- will be named excite_nandflash.
-
config MTD_NAND_CAFE
tristate "NAND support for OLPC CAFÉ chip"
depends on PCI
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index 460a1f3..1407bd1 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -27,7 +27,6 @@ obj-$(CONFIG_MTD_NAND_ATMEL) += atmel_nand.o
obj-$(CONFIG_MTD_NAND_GPIO) += gpio.o
obj-$(CONFIG_MTD_NAND_OMAP2) += omap2.o
obj-$(CONFIG_MTD_NAND_CM_X270) += cmx270_nand.o
-obj-$(CONFIG_MTD_NAND_BASLER_EXCITE) += excite_nandflash.o
obj-$(CONFIG_MTD_NAND_PXA3xx) += pxa3xx_nand.o
obj-$(CONFIG_MTD_NAND_TMIO) += tmio_nand.o
obj-$(CONFIG_MTD_NAND_PLATFORM) += plat_nand.o
diff --git a/drivers/mtd/nand/excite_nandflash.c b/drivers/mtd/nand/excite_nandflash.c
deleted file mode 100644
index af6a6a5..0000000
--- a/drivers/mtd/nand/excite_nandflash.c
+++ /dev/null
@@ -1,248 +0,0 @@
-/*
-* Copyright (C) 2005 - 2007 by Basler Vision Technologies AG
-* Author: Thomas Koeller <thomas.koeller.qbaslerweb.com>
-* Original code by Thies Moeller <thies.moeller@baslerweb.com>
-*
-* This program is free software; you can redistribute it and/or modify
-* it under the terms of the GNU General Public License as published by
-* the Free Software Foundation; either version 2 of the License, or
-* (at your option) any later version.
-*
-* This program is distributed in the hope that it will be useful,
-* but WITHOUT ANY WARRANTY; without even the implied warranty of
-* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-* GNU General Public License for more details.
-*
-* You should have received a copy of the GNU General Public License
-* along with this program; if not, write to the Free Software
-* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-*/
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/ioport.h>
-#include <linux/platform_device.h>
-#include <linux/delay.h>
-#include <linux/err.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/nand_ecc.h>
-#include <linux/mtd/partitions.h>
-
-#include <asm/io.h>
-#include <asm/rm9k-ocd.h>
-
-#include <excite_nandflash.h>
-
-#define EXCITE_NANDFLASH_VERSION "0.1"
-
-/* I/O register offsets */
-#define EXCITE_NANDFLASH_DATA_BYTE 0x00
-#define EXCITE_NANDFLASH_STATUS_BYTE 0x0c
-#define EXCITE_NANDFLASH_ADDR_BYTE 0x10
-#define EXCITE_NANDFLASH_CMD_BYTE 0x14
-
-/* prefix for debug output */
-static const char module_id[] = "excite_nandflash";
-
-/*
- * partition definition
- */
-static const struct mtd_partition partition_info[] = {
- {
- .name = "eXcite RootFS",
- .offset = 0,
- .size = MTDPART_SIZ_FULL
- }
-};
-
-static inline const struct resource *
-excite_nand_get_resource(struct platform_device *d, unsigned long flags,
- const char *basename)
-{
- char buf[80];
-
- if (snprintf(buf, sizeof buf, "%s_%u", basename, d->id) >= sizeof buf)
- return NULL;
- return platform_get_resource_byname(d, flags, buf);
-}
-
-static inline void __iomem *
-excite_nand_map_regs(struct platform_device *d, const char *basename)
-{
- void *result = NULL;
- const struct resource *const r =
- excite_nand_get_resource(d, IORESOURCE_MEM, basename);
-
- if (r)
- result = ioremap_nocache(r->start, r->end + 1 - r->start);
- return result;
-}
-
-/* controller and mtd information */
-struct excite_nand_drvdata {
- struct mtd_info board_mtd;
- struct nand_chip board_chip;
- void __iomem *regs;
- void __iomem *tgt;
-};
-
-/* Control function */
-static void excite_nand_control(struct mtd_info *mtd, int cmd,
- unsigned int ctrl)
-{
- struct excite_nand_drvdata * const d =
- container_of(mtd, struct excite_nand_drvdata, board_mtd);
-
- switch (ctrl) {
- case NAND_CTRL_CHANGE | NAND_CTRL_CLE:
- d->tgt = d->regs + EXCITE_NANDFLASH_CMD_BYTE;
- break;
- case NAND_CTRL_CHANGE | NAND_CTRL_ALE:
- d->tgt = d->regs + EXCITE_NANDFLASH_ADDR_BYTE;
- break;
- case NAND_CTRL_CHANGE | NAND_NCE:
- d->tgt = d->regs + EXCITE_NANDFLASH_DATA_BYTE;
- break;
- }
-
- if (cmd != NAND_CMD_NONE)
- __raw_writeb(cmd, d->tgt);
-}
-
-/* Return 0 if flash is busy, 1 if ready */
-static int excite_nand_devready(struct mtd_info *mtd)
-{
- struct excite_nand_drvdata * const drvdata =
- container_of(mtd, struct excite_nand_drvdata, board_mtd);
-
- return __raw_readb(drvdata->regs + EXCITE_NANDFLASH_STATUS_BYTE);
-}
-
-/*
- * Called by device layer to remove the driver.
- * The binding to the mtd and all allocated
- * resources are released.
- */
-static int __devexit excite_nand_remove(struct platform_device *dev)
-{
- struct excite_nand_drvdata * const this = platform_get_drvdata(dev);
-
- platform_set_drvdata(dev, NULL);
-
- if (unlikely(!this)) {
- printk(KERN_ERR "%s: called %s without private data!!",
- module_id, __func__);
- return -EINVAL;
- }
-
- /* first thing we need to do is release our mtd
- * then go through freeing the resource used
- */
- nand_release(&this->board_mtd);
-
- /* free the common resources */
- iounmap(this->regs);
- kfree(this);
-
- DEBUG(MTD_DEBUG_LEVEL1, "%s: removed\n", module_id);
- return 0;
-}
-
-/*
- * Called by device layer when it finds a device matching
- * one our driver can handle. This code checks to see if
- * it can allocate all necessary resources then calls the
- * nand layer to look for devices.
-*/
-static int __init excite_nand_probe(struct platform_device *pdev)
-{
- struct excite_nand_drvdata *drvdata; /* private driver data */
- struct nand_chip *board_chip; /* private flash chip data */
- struct mtd_info *board_mtd; /* mtd info for this board */
- int scan_res;
-
- drvdata = kzalloc(sizeof(*drvdata), GFP_KERNEL);
- if (unlikely(!drvdata)) {
- printk(KERN_ERR "%s: no memory for drvdata\n",
- module_id);
- return -ENOMEM;
- }
-
- /* bind private data into driver */
- platform_set_drvdata(pdev, drvdata);
-
- /* allocate and map the resource */
- drvdata->regs =
- excite_nand_map_regs(pdev, EXCITE_NANDFLASH_RESOURCE_REGS);
-
- if (unlikely(!drvdata->regs)) {
- printk(KERN_ERR "%s: cannot reserve register region\n",
- module_id);
- kfree(drvdata);
- return -ENXIO;
- }
-
- drvdata->tgt = drvdata->regs + EXCITE_NANDFLASH_DATA_BYTE;
-
- /* initialise our chip */
- board_chip = &drvdata->board_chip;
- board_chip->IO_ADDR_R = board_chip->IO_ADDR_W =
- drvdata->regs + EXCITE_NANDFLASH_DATA_BYTE;
- board_chip->cmd_ctrl = excite_nand_control;
- board_chip->dev_ready = excite_nand_devready;
- board_chip->chip_delay = 25;
- board_chip->ecc.mode = NAND_ECC_SOFT;
-
- /* link chip to mtd */
- board_mtd = &drvdata->board_mtd;
- board_mtd->priv = board_chip;
-
- DEBUG(MTD_DEBUG_LEVEL2, "%s: device scan\n", module_id);
- scan_res = nand_scan(&drvdata->board_mtd, 1);
-
- if (likely(!scan_res)) {
- DEBUG(MTD_DEBUG_LEVEL2, "%s: register partitions\n", module_id);
- add_mtd_partitions(&drvdata->board_mtd, partition_info,
- ARRAY_SIZE(partition_info));
- } else {
- iounmap(drvdata->regs);
- kfree(drvdata);
- printk(KERN_ERR "%s: device scan failed\n", module_id);
- return -EIO;
- }
- return 0;
-}
-
-static struct platform_driver excite_nand_driver = {
- .driver = {
- .name = "excite_nand",
- .owner = THIS_MODULE,
- },
- .probe = excite_nand_probe,
- .remove = __devexit_p(excite_nand_remove)
-};
-
-static int __init excite_nand_init(void)
-{
- pr_info("Basler eXcite nand flash driver Version "
- EXCITE_NANDFLASH_VERSION "\n");
- return platform_driver_register(&excite_nand_driver);
-}
-
-static void __exit excite_nand_exit(void)
-{
- platform_driver_unregister(&excite_nand_driver);
-}
-
-module_init(excite_nand_init);
-module_exit(excite_nand_exit);
-
-MODULE_AUTHOR("Thomas Koeller <thomas.koeller@baslerweb.com>");
-MODULE_DESCRIPTION("Basler eXcite NAND-Flash driver");
-MODULE_LICENSE("GPL");
-MODULE_VERSION(EXCITE_NANDFLASH_VERSION)
diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
index d958b76..da84fd0 100644
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
@@ -815,16 +815,6 @@ config PNX833X_WDT
timer has expired and no process has written to /dev/watchdog during
that time.
-config WDT_RM9K_GPI
- tristate "RM9000/GPI hardware watchdog"
- depends on CPU_RM9000
- help
- Watchdog implementation using the GPI hardware found on
- PMC-Sierra RM9xxx CPUs.
-
- To compile this driver as a module, choose M here: the
- module will be called rm9k_wdt.
-
config SIBYTE_WDOG
tristate "Sibyte SoC hardware watchdog"
depends on CPU_SB1
diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
index 89c045d..475c611 100644
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
@@ -109,7 +109,6 @@ obj-$(CONFIG_RC32434_WDT) += rc32434_wdt.o
obj-$(CONFIG_INDYDOG) += indydog.o
obj-$(CONFIG_WDT_MTX1) += mtx-1_wdt.o
obj-$(CONFIG_PNX833X_WDT) += pnx833x_wdt.o
-obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o
obj-$(CONFIG_SIBYTE_WDOG) += sb_wdog.o
obj-$(CONFIG_AR7_WDT) += ar7_wdt.o
obj-$(CONFIG_TXX9_WDT) += txx9wdt.o
diff --git a/drivers/watchdog/rm9k_wdt.c b/drivers/watchdog/rm9k_wdt.c
deleted file mode 100644
index bb66958..0000000
--- a/drivers/watchdog/rm9k_wdt.c
+++ /dev/null
@@ -1,419 +0,0 @@
-/*
- * Watchdog implementation for GPI h/w found on PMC-Sierra RM9xxx
- * chips.
- *
- * Copyright (C) 2004 by Basler Vision Technologies AG
- * Author: Thomas Koeller <thomas.koeller@baslerweb.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
- */
-
-#include <linux/platform_device.h>
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/interrupt.h>
-#include <linux/fs.h>
-#include <linux/reboot.h>
-#include <linux/notifier.h>
-#include <linux/miscdevice.h>
-#include <linux/watchdog.h>
-#include <linux/io.h>
-#include <linux/uaccess.h>
-#include <asm/atomic.h>
-#include <asm/processor.h>
-#include <asm/system.h>
-#include <asm/rm9k-ocd.h>
-
-#include <rm9k_wdt.h>
-
-
-#define CLOCK 125000000
-#define MAX_TIMEOUT_SECONDS 32
-#define CPCCR 0x0080
-#define CPGIG1SR 0x0044
-#define CPGIG1ER 0x0054
-
-
-/* Function prototypes */
-static irqreturn_t wdt_gpi_irqhdl(int, void *);
-static void wdt_gpi_start(void);
-static void wdt_gpi_stop(void);
-static void wdt_gpi_set_timeout(unsigned int);
-static int wdt_gpi_open(struct inode *, struct file *);
-static int wdt_gpi_release(struct inode *, struct file *);
-static ssize_t wdt_gpi_write(struct file *, const char __user *, size_t,
- loff_t *);
-static long wdt_gpi_ioctl(struct file *, unsigned int, unsigned long);
-static int wdt_gpi_notify(struct notifier_block *, unsigned long, void *);
-static const struct resource *wdt_gpi_get_resource(struct platform_device *,
- const char *, unsigned int);
-static int __init wdt_gpi_probe(struct platform_device *);
-static int __exit wdt_gpi_remove(struct platform_device *);
-
-
-static const char wdt_gpi_name[] = "wdt_gpi";
-static atomic_t opencnt;
-static int expect_close;
-static int locked;
-
-
-/* These are set from device resources */
-static void __iomem *wd_regs;
-static unsigned int wd_irq, wd_ctr;
-
-
-/* Module arguments */
-static int timeout = MAX_TIMEOUT_SECONDS;
-module_param(timeout, int, 0444);
-MODULE_PARM_DESC(timeout, "Watchdog timeout in seconds");
-
-static unsigned long resetaddr = 0xbffdc200;
-module_param(resetaddr, ulong, 0444);
-MODULE_PARM_DESC(resetaddr, "Address to write to to force a reset");
-
-static unsigned long flagaddr = 0xbffdc104;
-module_param(flagaddr, ulong, 0444);
-MODULE_PARM_DESC(flagaddr, "Address to write to boot flags to");
-
-static int powercycle;
-module_param(powercycle, bool, 0444);
-MODULE_PARM_DESC(powercycle, "Cycle power if watchdog expires");
-
-static int nowayout = WATCHDOG_NOWAYOUT;
-module_param(nowayout, bool, 0444);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be disabled once started");
-
-
-/* Kernel interfaces */
-static const struct file_operations fops = {
- .owner = THIS_MODULE,
- .open = wdt_gpi_open,
- .release = wdt_gpi_release,
- .write = wdt_gpi_write,
- .unlocked_ioctl = wdt_gpi_ioctl,
-};
-
-static struct miscdevice miscdev = {
- .minor = WATCHDOG_MINOR,
- .name = wdt_gpi_name,
- .fops = &fops,
-};
-
-static struct notifier_block wdt_gpi_shutdown = {
- .notifier_call = wdt_gpi_notify,
-};
-
-
-/* Interrupt handler */
-static irqreturn_t wdt_gpi_irqhdl(int irq, void *ctxt)
-{
- if (!unlikely(__raw_readl(wd_regs + 0x0008) & 0x1))
- return IRQ_NONE;
- __raw_writel(0x1, wd_regs + 0x0008);
-
-
- printk(KERN_CRIT "%s: watchdog expired - resetting system\n",
- wdt_gpi_name);
-
- *(volatile char *) flagaddr |= 0x01;
- *(volatile char *) resetaddr = powercycle ? 0x01 : 0x2;
- iob();
- while (1)
- cpu_relax();
-}
-
-
-/* Watchdog functions */
-static void wdt_gpi_start(void)
-{
- u32 reg;
-
- lock_titan_regs();
- reg = titan_readl(CPGIG1ER);
- titan_writel(reg | (0x100 << wd_ctr), CPGIG1ER);
- iob();
- unlock_titan_regs();
-}
-
-static void wdt_gpi_stop(void)
-{
- u32 reg;
-
- lock_titan_regs();
- reg = titan_readl(CPCCR) & ~(0xf << (wd_ctr * 4));
- titan_writel(reg, CPCCR);
- reg = titan_readl(CPGIG1ER);
- titan_writel(reg & ~(0x100 << wd_ctr), CPGIG1ER);
- iob();
- unlock_titan_regs();
-}
-
-static void wdt_gpi_set_timeout(unsigned int to)
-{
- u32 reg;
- const u32 wdval = (to * CLOCK) & ~0x0000000f;
-
- lock_titan_regs();
- reg = titan_readl(CPCCR) & ~(0xf << (wd_ctr * 4));
- titan_writel(reg, CPCCR);
- wmb();
- __raw_writel(wdval, wd_regs + 0x0000);
- wmb();
- titan_writel(reg | (0x2 << (wd_ctr * 4)), CPCCR);
- wmb();
- titan_writel(reg | (0x5 << (wd_ctr * 4)), CPCCR);
- iob();
- unlock_titan_regs();
-}
-
-
-/* /dev/watchdog operations */
-static int wdt_gpi_open(struct inode *inode, struct file *file)
-{
- int res;
-
- if (unlikely(atomic_dec_if_positive(&opencnt) < 0))
- return -EBUSY;
-
- expect_close = 0;
- if (locked) {
- module_put(THIS_MODULE);
- free_irq(wd_irq, &miscdev);
- locked = 0;
- }
-
- res = request_irq(wd_irq, wdt_gpi_irqhdl, IRQF_SHARED | IRQF_DISABLED,
- wdt_gpi_name, &miscdev);
- if (unlikely(res))
- return res;
-
- wdt_gpi_set_timeout(timeout);
- wdt_gpi_start();
-
- printk(KERN_INFO "%s: watchdog started, timeout = %u seconds\n",
- wdt_gpi_name, timeout);
- return nonseekable_open(inode, file);
-}
-
-static int wdt_gpi_release(struct inode *inode, struct file *file)
-{
- if (nowayout) {
- printk(KERN_INFO "%s: no way out - watchdog left running\n",
- wdt_gpi_name);
- __module_get(THIS_MODULE);
- locked = 1;
- } else {
- if (expect_close) {
- wdt_gpi_stop();
- free_irq(wd_irq, &miscdev);
- printk(KERN_INFO "%s: watchdog stopped\n",
- wdt_gpi_name);
- } else {
- printk(KERN_CRIT "%s: unexpected close() -"
- " watchdog left running\n",
- wdt_gpi_name);
- wdt_gpi_set_timeout(timeout);
- __module_get(THIS_MODULE);
- locked = 1;
- }
- }
-
- atomic_inc(&opencnt);
- return 0;
-}
-
-static ssize_t wdt_gpi_write(struct file *f, const char __user *d, size_t s,
- loff_t *o)
-{
- char val;
-
- wdt_gpi_set_timeout(timeout);
- expect_close = (s > 0) && !get_user(val, d) && (val == 'V');
- return s ? 1 : 0;
-}
-
-static long wdt_gpi_ioctl(struct file *f, unsigned int cmd, unsigned long arg)
-{
- long res = -ENOTTY;
- const long size = _IOC_SIZE(cmd);
- int stat;
- void __user *argp = (void __user *)arg;
- static struct watchdog_info wdinfo = {
- .identity = "RM9xxx/GPI watchdog",
- .firmware_version = 0,
- .options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING
- };
-
- if (unlikely(_IOC_TYPE(cmd) != WATCHDOG_IOCTL_BASE))
- return -ENOTTY;
-
- if ((_IOC_DIR(cmd) & _IOC_READ)
- && !access_ok(VERIFY_WRITE, arg, size))
- return -EFAULT;
-
- if ((_IOC_DIR(cmd) & _IOC_WRITE)
- && !access_ok(VERIFY_READ, arg, size))
- return -EFAULT;
-
- expect_close = 0;
-
- switch (cmd) {
- case WDIOC_GETSUPPORT:
- wdinfo.options = nowayout ?
- WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING :
- WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING |
- WDIOF_MAGICCLOSE;
- res = __copy_to_user(argp, &wdinfo, size) ? -EFAULT : size;
- break;
-
- case WDIOC_GETSTATUS:
- break;
-
- case WDIOC_GETBOOTSTATUS:
- stat = (*(volatile char *) flagaddr & 0x01)
- ? WDIOF_CARDRESET : 0;
- res = __copy_to_user(argp, &stat, size) ?
- -EFAULT : size;
- break;
-
- case WDIOC_SETOPTIONS:
- break;
-
- case WDIOC_KEEPALIVE:
- wdt_gpi_set_timeout(timeout);
- res = size;
- break;
-
- case WDIOC_SETTIMEOUT:
- {
- int val;
- if (unlikely(__copy_from_user(&val, argp, size))) {
- res = -EFAULT;
- break;
- }
-
- if (val > MAX_TIMEOUT_SECONDS)
- val = MAX_TIMEOUT_SECONDS;
- timeout = val;
- wdt_gpi_set_timeout(val);
- res = size;
- printk(KERN_INFO "%s: timeout set to %u seconds\n",
- wdt_gpi_name, timeout);
- }
- break;
-
- case WDIOC_GETTIMEOUT:
- res = __copy_to_user(argp, &timeout, size) ?
- -EFAULT : size;
- break;
- }
-
- return res;
-}
-
-
-/* Shutdown notifier */
-static int wdt_gpi_notify(struct notifier_block *this, unsigned long code,
- void *unused)
-{
- if (code == SYS_DOWN || code == SYS_HALT)
- wdt_gpi_stop();
-
- return NOTIFY_DONE;
-}
-
-
-/* Init & exit procedures */
-static const struct resource *wdt_gpi_get_resource(struct platform_device *pdv,
- const char *name, unsigned int type)
-{
- char buf[80];
- if (snprintf(buf, sizeof(buf), "%s_0", name) >= sizeof(buf))
- return NULL;
- return platform_get_resource_byname(pdv, type, buf);
-}
-
-/* No hotplugging on the platform bus - use __devinit */
-static int __devinit wdt_gpi_probe(struct platform_device *pdv)
-{
- int res;
- const struct resource
- * const rr = wdt_gpi_get_resource(pdv, WDT_RESOURCE_REGS,
- IORESOURCE_MEM),
- * const ri = wdt_gpi_get_resource(pdv, WDT_RESOURCE_IRQ,
- IORESOURCE_IRQ),
- * const rc = wdt_gpi_get_resource(pdv, WDT_RESOURCE_COUNTER,
- 0);
-
- if (unlikely(!rr || !ri || !rc))
- return -ENXIO;
-
- wd_regs = ioremap_nocache(rr->start, rr->end + 1 - rr->start);
- if (unlikely(!wd_regs))
- return -ENOMEM;
- wd_irq = ri->start;
- wd_ctr = rc->start;
- res = misc_register(&miscdev);
- if (res)
- iounmap(wd_regs);
- else
- register_reboot_notifier(&wdt_gpi_shutdown);
- return res;
-}
-
-static int __devexit wdt_gpi_remove(struct platform_device *dev)
-{
- int res;
-
- unregister_reboot_notifier(&wdt_gpi_shutdown);
- res = misc_deregister(&miscdev);
- iounmap(wd_regs);
- wd_regs = NULL;
- return res;
-}
-
-
-/* Device driver init & exit */
-static struct platform_driver wgt_gpi_driver = {
- .driver = {
- .name = wdt_gpi_name,
- .owner = THIS_MODULE,
- },
- .probe = wdt_gpi_probe,
- .remove = __devexit_p(wdt_gpi_remove),
-};
-
-static int __init wdt_gpi_init_module(void)
-{
- atomic_set(&opencnt, 1);
- if (timeout > MAX_TIMEOUT_SECONDS)
- timeout = MAX_TIMEOUT_SECONDS;
- return platform_driver_register(&wdt_gpi_driver);
-}
-
-static void __exit wdt_gpi_cleanup_module(void)
-{
- platform_driver_unregister(&wdt_gpi_driver);
-}
-
-module_init(wdt_gpi_init_module);
-module_exit(wdt_gpi_cleanup_module);
-
-MODULE_AUTHOR("Thomas Koeller <thomas.koeller@baslerweb.com>");
-MODULE_DESCRIPTION("Basler eXcite watchdog driver for gpi devices");
-MODULE_VERSION("0.1");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR);
-