1 files changed, 60 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/sound/imx-audio-es8328.txt b/Documentation/devicetree/bindings/sound/imx-audio-es8328.txt
new file mode 100644
index 0000000..07b68ab
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/imx-audio-es8328.txt
@@ -0,0 +1,60 @@
+Freescale i.MX audio complex with ES8328 codec
+
+Required properties:
+- compatible       : "fsl,imx-audio-es8328"
+- model            : The user-visible name of this sound complex
+- ssi-controller   : The phandle of the i.MX SSI controller
+- jack-gpio        : Optional GPIO for headphone jack
+- audio-amp-supply : Power regulator for speaker amps
+- audio-codec      : The phandle of the ES8328 audio codec
+- audio-routing    : A list of the connections between audio components.
+                     Each entry is a pair of strings, the first being the
+		     connection's sink, the second being the connection's
+		     source. Valid names could be power supplies, ES8328
+		     pins, and the jacks on the board:
+
+			Power supplies:
+			   * audio-amp
+
+			ES8328 pins:
+			   * LOUT1
+			   * LOUT2
+			   * ROUT1
+			   * ROUT2
+			   * LINPUT1
+			   * LINPUT2
+			   * RINPUT1
+			   * RINPUT2
+			   * Mic PGA
+
+			Board connectors:
+			   * Headphone
+			   * Speaker
+			   * Mic Jack
+- mux-int-port     : The internal port of the i.MX audio muxer (AUDMUX)
+- mux-ext-port     : The external port of the i.MX audio muxer (AUDMIX)
+
+Note: The AUDMUX port numbering should start at 1, which is consistent with
+hardware manual.
+
+Example:
+
+sound {
+	compatible = "fsl,imx-audio-es8328";
+	model = "imx-audio-es8328";
+	ssi-controller = <&ssi1>;
+	audio-codec = <&codec>;
+	jack-gpio = <&gpio5 15 0>;
+	audio-amp-supply = <&reg_audio_amp>;
+	audio-routing =
+		"Speaker", "LOUT2",
+		"Speaker", "ROUT2",
+		"Speaker", "audio-amp",
+		"Headphone", "ROUT1",
+		"Headphone", "LOUT1",
+		"LINPUT1", "Mic Jack",
+		"RINPUT1", "Mic Jack",
+		"Mic Jack", "Mic Bias";
+	mux-int-port = <1>;
+	mux-ext-port = <3>;
+};